diff --git a/src/App/Resources/translations/App.ts b/src/App/Resources/translations/App.ts index aee76ef27b..0c308f627c 100644 --- a/src/App/Resources/translations/App.ts +++ b/src/App/Resources/translations/App.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed diff --git a/src/App/Resources/translations/App_be.ts b/src/App/Resources/translations/App_be.ts index 1089c4bdea..5f6eb0a922 100644 --- a/src/App/Resources/translations/App_be.ts +++ b/src/App/Resources/translations/App_be.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Без назвы diff --git a/src/App/Resources/translations/App_ca.ts b/src/App/Resources/translations/App_ca.ts index b8a7ff25e8..8bf6fd8461 100644 --- a/src/App/Resources/translations/App_ca.ts +++ b/src/App/Resources/translations/App_ca.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Sense nom diff --git a/src/App/Resources/translations/App_cs.ts b/src/App/Resources/translations/App_cs.ts index 15c13efb3c..a103f2a431 100644 --- a/src/App/Resources/translations/App_cs.ts +++ b/src/App/Resources/translations/App_cs.ts @@ -14,7 +14,7 @@ které odkazují na stejný konfigurovatelný objekt QObject - + Unnamed Nepojmenovaný diff --git a/src/App/Resources/translations/App_de.ts b/src/App/Resources/translations/App_de.ts index 3dcb0767da..b08221a5af 100644 --- a/src/App/Resources/translations/App_de.ts +++ b/src/App/Resources/translations/App_de.ts @@ -14,7 +14,7 @@ angewendet werden soll, die das gleiche konfigurierbare Objekt referenzieren QObject - + Unnamed Unbenannt diff --git a/src/App/Resources/translations/App_el.ts b/src/App/Resources/translations/App_el.ts index 891f2d9c0b..3c5f2080e1 100644 --- a/src/App/Resources/translations/App_el.ts +++ b/src/App/Resources/translations/App_el.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Ανώνυμο diff --git a/src/App/Resources/translations/App_es-AR.ts b/src/App/Resources/translations/App_es-AR.ts index 541fb63420..ce6ec90855 100644 --- a/src/App/Resources/translations/App_es-AR.ts +++ b/src/App/Resources/translations/App_es-AR.ts @@ -14,7 +14,7 @@ que hacen referencia al mismo objeto configurable QObject - + Unnamed Sin nombre diff --git a/src/App/Resources/translations/App_es-ES.ts b/src/App/Resources/translations/App_es-ES.ts index da98123e02..0dbc5a3169 100644 --- a/src/App/Resources/translations/App_es-ES.ts +++ b/src/App/Resources/translations/App_es-ES.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Sin nombre diff --git a/src/App/Resources/translations/App_eu.ts b/src/App/Resources/translations/App_eu.ts index 3d13d6d5bf..6f735414cb 100644 --- a/src/App/Resources/translations/App_eu.ts +++ b/src/App/Resources/translations/App_eu.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Izenik gabea diff --git a/src/App/Resources/translations/App_fi.ts b/src/App/Resources/translations/App_fi.ts index 8f4687e6ba..b51c12ec33 100644 --- a/src/App/Resources/translations/App_fi.ts +++ b/src/App/Resources/translations/App_fi.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Nimetön diff --git a/src/App/Resources/translations/App_fr.ts b/src/App/Resources/translations/App_fr.ts index ae5606c70e..5550763181 100644 --- a/src/App/Resources/translations/App_fr.ts +++ b/src/App/Resources/translations/App_fr.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Sans nom diff --git a/src/App/Resources/translations/App_gl.ts b/src/App/Resources/translations/App_gl.ts index b12a18a265..a6f6707945 100644 --- a/src/App/Resources/translations/App_gl.ts +++ b/src/App/Resources/translations/App_gl.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Sen nome diff --git a/src/App/Resources/translations/App_hr.ts b/src/App/Resources/translations/App_hr.ts index 354ab54444..d830370d4a 100644 --- a/src/App/Resources/translations/App_hr.ts +++ b/src/App/Resources/translations/App_hr.ts @@ -14,7 +14,7 @@ na sve veze koje referenciraju isti konfigurabilni objekt QObject - + Unnamed Neimenovano diff --git a/src/App/Resources/translations/App_hu.ts b/src/App/Resources/translations/App_hu.ts index 60c91c03fe..7d4c875ef4 100644 --- a/src/App/Resources/translations/App_hu.ts +++ b/src/App/Resources/translations/App_hu.ts @@ -14,7 +14,7 @@ amelyek ugyanarra a konfigurálható tárgyra hivatkoznak QObject - + Unnamed Névtelen diff --git a/src/App/Resources/translations/App_id.ts b/src/App/Resources/translations/App_id.ts index ee89287369..a0bf0506d8 100644 --- a/src/App/Resources/translations/App_id.ts +++ b/src/App/Resources/translations/App_id.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Tanpa nama diff --git a/src/App/Resources/translations/App_it.ts b/src/App/Resources/translations/App_it.ts index 8e943f5530..8e67b294b2 100644 --- a/src/App/Resources/translations/App_it.ts +++ b/src/App/Resources/translations/App_it.ts @@ -14,7 +14,7 @@ che fanno riferimento allo stesso oggetto configurabile QObject - + Unnamed Senza nome diff --git a/src/App/Resources/translations/App_ja.ts b/src/App/Resources/translations/App_ja.ts index 4d49116a66..361941765b 100644 --- a/src/App/Resources/translations/App_ja.ts +++ b/src/App/Resources/translations/App_ja.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed 名称未設定 diff --git a/src/App/Resources/translations/App_ka.ts b/src/App/Resources/translations/App_ka.ts index df598196a4..7267a4020f 100644 --- a/src/App/Resources/translations/App_ka.ts +++ b/src/App/Resources/translations/App_ka.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed უსახელო diff --git a/src/App/Resources/translations/App_ko.ts b/src/App/Resources/translations/App_ko.ts index f6894ff336..9d64d2e556 100644 --- a/src/App/Resources/translations/App_ko.ts +++ b/src/App/Resources/translations/App_ko.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed 이름없음 diff --git a/src/App/Resources/translations/App_nl.ts b/src/App/Resources/translations/App_nl.ts index 7f97931a07..cf996e3281 100644 --- a/src/App/Resources/translations/App_nl.ts +++ b/src/App/Resources/translations/App_nl.ts @@ -14,7 +14,7 @@ die verwijzen naar hetzelfde configureerbare object QObject - + Unnamed Naamloos diff --git a/src/App/Resources/translations/App_pl.ts b/src/App/Resources/translations/App_pl.ts index a74ab8c321..d2706eaf64 100644 --- a/src/App/Resources/translations/App_pl.ts +++ b/src/App/Resources/translations/App_pl.ts @@ -14,7 +14,7 @@ które odnoszą się do tego samego obiektu konfigurowalnego QObject - + Unnamed Nienazwany diff --git a/src/App/Resources/translations/App_pt-BR.ts b/src/App/Resources/translations/App_pt-BR.ts index 76fb364a26..cc5f30c986 100644 --- a/src/App/Resources/translations/App_pt-BR.ts +++ b/src/App/Resources/translations/App_pt-BR.ts @@ -14,7 +14,7 @@ que referenciam o mesmo objeto configurável QObject - + Unnamed Sem nome diff --git a/src/App/Resources/translations/App_pt-PT.ts b/src/App/Resources/translations/App_pt-PT.ts index b81a5bb300..e8eee89e5a 100644 --- a/src/App/Resources/translations/App_pt-PT.ts +++ b/src/App/Resources/translations/App_pt-PT.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Sem nome diff --git a/src/App/Resources/translations/App_ro.ts b/src/App/Resources/translations/App_ro.ts index b3d537e316..71da65f444 100644 --- a/src/App/Resources/translations/App_ro.ts +++ b/src/App/Resources/translations/App_ro.ts @@ -14,7 +14,7 @@ care fac referire la același obiect configurabil QObject - + Unnamed Nedenumit diff --git a/src/App/Resources/translations/App_ru.ts b/src/App/Resources/translations/App_ru.ts index 947319f0fa..a984cdb692 100644 --- a/src/App/Resources/translations/App_ru.ts +++ b/src/App/Resources/translations/App_ru.ts @@ -13,7 +13,7 @@ that reference the same configurable object QObject - + Unnamed Безымянный diff --git a/src/App/Resources/translations/App_sl.ts b/src/App/Resources/translations/App_sl.ts index 2c696febba..9162d65cbe 100644 --- a/src/App/Resources/translations/App_sl.ts +++ b/src/App/Resources/translations/App_sl.ts @@ -14,7 +14,7 @@ za vse povezave, ki se sklicujejo na isti nastavljivi predmet QObject - + Unnamed Neimenovan diff --git a/src/App/Resources/translations/App_sr-CS.ts b/src/App/Resources/translations/App_sr-CS.ts index 420a870424..495f3812ce 100644 --- a/src/App/Resources/translations/App_sr-CS.ts +++ b/src/App/Resources/translations/App_sr-CS.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Bez imena diff --git a/src/App/Resources/translations/App_sr.ts b/src/App/Resources/translations/App_sr.ts index bb121f6be9..8ef1d0b1e1 100644 --- a/src/App/Resources/translations/App_sr.ts +++ b/src/App/Resources/translations/App_sr.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Без имена diff --git a/src/App/Resources/translations/App_sv-SE.ts b/src/App/Resources/translations/App_sv-SE.ts index 4ecd57fb02..753756d73c 100644 --- a/src/App/Resources/translations/App_sv-SE.ts +++ b/src/App/Resources/translations/App_sv-SE.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Namnlös diff --git a/src/App/Resources/translations/App_tr.ts b/src/App/Resources/translations/App_tr.ts index 13511c86d8..5b04ac2312 100644 --- a/src/App/Resources/translations/App_tr.ts +++ b/src/App/Resources/translations/App_tr.ts @@ -14,7 +14,7 @@ uygulanmayacağına ilişkin son kullanıcı seçimini saklar QObject - + Unnamed İsimsiz diff --git a/src/App/Resources/translations/App_uk.ts b/src/App/Resources/translations/App_uk.ts index 06df94b116..f95abbba01 100644 --- a/src/App/Resources/translations/App_uk.ts +++ b/src/App/Resources/translations/App_uk.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Без назви diff --git a/src/App/Resources/translations/App_val-ES.ts b/src/App/Resources/translations/App_val-ES.ts index 6eceaf1eb7..4cb0c02a1d 100644 --- a/src/App/Resources/translations/App_val-ES.ts +++ b/src/App/Resources/translations/App_val-ES.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed Sense nom diff --git a/src/App/Resources/translations/App_zh-CN.ts b/src/App/Resources/translations/App_zh-CN.ts index 943ed9ec41..ae5bd9a8b9 100644 --- a/src/App/Resources/translations/App_zh-CN.ts +++ b/src/App/Resources/translations/App_zh-CN.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed 未命名 diff --git a/src/App/Resources/translations/App_zh-TW.ts b/src/App/Resources/translations/App_zh-TW.ts index d3f03d427a..e7a484d9a4 100644 --- a/src/App/Resources/translations/App_zh-TW.ts +++ b/src/App/Resources/translations/App_zh-TW.ts @@ -14,7 +14,7 @@ that reference the same configurable object QObject - + Unnamed 未命名 diff --git a/src/Base/Resources/translations/Base_be.ts b/src/Base/Resources/translations/Base_be.ts index 791d4e675f..d1c49d7cc3 100644 --- a/src/Base/Resources/translations/Base_be.ts +++ b/src/Base/Resources/translations/Base_be.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Стандартная (мм, кг, с, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + Сістэма МКС (м, кг, с, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Брытанская для грамадскіх інжынераў (футы, футы/с) diff --git a/src/Base/Resources/translations/Base_de.ts b/src/Base/Resources/translations/Base_de.ts index 8704c4cd54..77bf9c3285 100644 --- a/src/Base/Resources/translations/Base_de.ts +++ b/src/Base/Resources/translations/Base_de.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Standard (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Angloamerikanisch für Bauingenieurwesen (ft, ft/sec) diff --git a/src/Base/Resources/translations/Base_es-AR.ts b/src/Base/Resources/translations/Base_es-AR.ts index c1b6919f63..d81efb5fc1 100644 --- a/src/Base/Resources/translations/Base_es-AR.ts +++ b/src/Base/Resources/translations/Base_es-AR.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Estándar (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Imperial para Ing. Civil (pie, pie/seg) diff --git a/src/Base/Resources/translations/Base_es-ES.ts b/src/Base/Resources/translations/Base_es-ES.ts index 548023d691..5cb2c6d6f7 100644 --- a/src/Base/Resources/translations/Base_es-ES.ts +++ b/src/Base/Resources/translations/Base_es-ES.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Estándar (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Imperial para Ing. civil (ft, ft/s) diff --git a/src/Base/Resources/translations/Base_fr.ts b/src/Base/Resources/translations/Base_fr.ts index 87662b2eb3..3829e79465 100644 --- a/src/Base/Resources/translations/Base_fr.ts +++ b/src/Base/Resources/translations/Base_fr.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Standard (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Impérial pour le génie civil (ft, ft/s) diff --git a/src/Base/Resources/translations/Base_it.ts b/src/Base/Resources/translations/Base_it.ts index 45dc4383f7..314c72168e 100644 --- a/src/Base/Resources/translations/Base_it.ts +++ b/src/Base/Resources/translations/Base_it.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Standard (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Imperiale per Ingegneria Civile (ft, ft/sec) diff --git a/src/Base/Resources/translations/Base_ka.ts b/src/Base/Resources/translations/Base_ka.ts index 4823b06360..6bc1fbcacc 100644 --- a/src/Base/Resources/translations/Base_ka.ts +++ b/src/Base/Resources/translations/Base_ka.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + სტანდარტული (მმ, კგ, წმ, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + სი (მ, კგ, წმ, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + იმპერიული საზომი ერთეულები სამოქალაქო ინჟინერიისთვის(ფუტები, ფუტები/წმ) diff --git a/src/Base/Resources/translations/Base_pl.ts b/src/Base/Resources/translations/Base_pl.ts index 81067bb43c..921dbba89a 100644 --- a/src/Base/Resources/translations/Base_pl.ts +++ b/src/Base/Resources/translations/Base_pl.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Standardowe (mm, kg, s, °) MKS (m, kg, s, °) - MKS (m, kg, s, °) + MKS (m, kg, s, °) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Inżynieria lądowa brytyjski (ft, ft/s) diff --git a/src/Base/Resources/translations/Base_ru.ts b/src/Base/Resources/translations/Base_ru.ts index 349d7658e4..29218af938 100644 --- a/src/Base/Resources/translations/Base_ru.ts +++ b/src/Base/Resources/translations/Base_ru.ts @@ -6,12 +6,12 @@ Standard (mm, kg, s, °) - Standard (mm, kg, s, °) + Стандартная система мер (мм, кг, сек, угол) MKS (m, kg, s, °) - MKS (m, kg, s, °) + МКС (м, кг, сек, градус) @@ -26,7 +26,7 @@ Building Euro (cm, m², m³) - Строительство Евро (см, м2, м3) + Строительство Евро (см, м², м³) @@ -41,7 +41,7 @@ Imperial for Civil Eng (ft, ft/s) - Imperial for Civil Eng (ft, ft/s) + Имперская для граждан (ft, ft/с) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index b4891cac2e..6e9fdfc4b7 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -117,7 +117,7 @@ - + Import @@ -188,8 +188,8 @@ - + Transform @@ -421,42 +421,42 @@ EditMode - + Default - + The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform - + The object will have its placement editable with the Std TransformManip command - + Cutting - + This edit mode is implemented as available but currently does not seem to be used by any object - + Color - + The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings - + Orientation - + Q0 - + Q1 - + Q2 - + Q3 - + Current view @@ -2442,72 +2442,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... - + Resets the user settings for the page '%1' - + Reset group '%1'... - + Resets the user settings for the group '%1' - + Reset all... - + Resets the user settings entirely - + Clear user settings - + Do you want to clear all your user settings? - + If you agree all your settings will be cleared. - + Wrong parameter - + Restart required - + You must restart FreeCAD for changes to take effect. - + Restart now - + Restart later @@ -2842,56 +2842,56 @@ in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation - + Show axis cross by default - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - + Show counter of frames per second - + Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. - + Use software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) - + Render cache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2905,7 +2905,17 @@ report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + + + + + Axis letter color + + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2916,140 +2926,140 @@ but slower response to any scene changes. - + Auto - + Distributed - + Centralized - + Anti-Aliasing - + What kind of multisample anti-aliasing is used - + None - + Line Smoothing - + MSAA 2x - + MSAA 4x - + MSAA 8x - + Transparent objects: - + Render types of transparent objects - + One pass - + Backface pass - + Marker size: - + Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color - - + + Backlight color - + Intensity - + Intensity of the backlight - + Camera type - + Objects will appear in a perspective projection - + Perspective renderin&g - + Objects will be projected in orthographic projection - + Or&thographic rendering @@ -3061,57 +3071,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px - + 7px - + 9px - + 11px - + 13px - + 15px - + 20px - + 25px - + 30px - + Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. @@ -3988,7 +3998,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation @@ -4074,67 +4084,77 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + + + + + Opacity of the navigation cube when not focused + + + + Color - + Base color for all elements - + Rotation center indicator - + Sphere size - + Color and transparency - + The size of the rotation center indicator - + The color of the rotation center indicator - + 3D Navigation - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - + Mouse... - + Navigation settings set - + Orbit style - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4142,191 +4162,191 @@ Free Turntable: the part will be rotated around the z-axis. - + Turntable - + Trackball - + Free Turntable - + Rotation mode - + Rotations in 3D will use current cursor position as center for rotation - + Window center - + Drag at cursor - + Object center - + Default camera orientation - + Default camera orientation when creating a new document or selecting the home view - + Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - + mm - + Animations - + Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations - + Duration of navigation animations that have a fixed duration - + Animation duration - + The duration of navigation animations in milliseconds - + Zoom step - + Zoom operations will be performed at position of mouse pointer - + Zoom at cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted - + Invert zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture - + Isometric - + Dimetric - + Trimetric - + Top - + Front - + Left - + Right - + Rear - + Bottom - + Custom @@ -5576,7 +5596,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View @@ -6038,15 +6058,15 @@ Do you want to save your changes? - + Graphviz format + - Export graph @@ -6625,14 +6645,14 @@ How do you want to proceed? Gui::PropertyView - - + + View - - + + Data @@ -7602,22 +7622,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF - + PDF file - + Opening file failed - + Can't open file '%1' for writing. @@ -7877,45 +7897,45 @@ Do you want to specify another directory? - - - + + + Unknown filetype - - + + Cannot open unknown filetype: %1 - + Export failed - + Cannot save to unknown filetype: %1 - + Workbench failure - + %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version @@ -7966,8 +7986,8 @@ Do you want to specify another directory? - + Unsaved document @@ -8523,7 +8543,7 @@ Please open a browser window and type in: http://localhost:%1. - + Navigation styles @@ -8817,8 +8837,8 @@ the current copy will be lost. - + Toggle floating window @@ -8834,192 +8854,187 @@ the current copy will be lost. - + UI - + Tree view - + Item background color - + Item background padding - + Resizable columns - - Show item checkbox - - - - + Hide extra column - + Hide scroll bar - + Hide header - + IconSize - + FontSize - + ItemSpacing - + Overlay - + Hide tab bar - + Hide property view scroll bar - + Auto hide in non 3D view - + Auto mouse pass through - + Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) - + Alpha test radius - + Check Navigation Cube - + Hint trigger size - + Hint width - + Left panel hint offset - + Left panel hint length - + Right panel hint offset - + Right panel hint length - + Top panel hint offset - + Top panel hint length - + Bottom panel hint offset - + Bottom panel hint length - + Hint show tab bar - + Hint delay (ms) - + Splitter auto hide delay (ms) - + Activate on hover - + Layout delay (ms) - + Animation duration (ms) - + Animation curve type @@ -9952,8 +9967,8 @@ the current copy will be lost. - + Unnamed @@ -12249,12 +12264,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube - + Drag and place NaviCube @@ -12262,32 +12277,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT - + TOP - + RIGHT - + REAR - + BOTTOM - + LEFT @@ -12763,47 +12778,47 @@ display the splash screen - + Combo View - + TreeView and PropertyView - + Preference Pack Name - + Tags - + Apply - + Apply the %1 preference pack - + Choose a FreeCAD config file to import - + File exists - + A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_be.ts b/src/Gui/Language/FreeCAD_be.ts index 4c720031de..f9e92c98d5 100644 --- a/src/Gui/Language/FreeCAD_be.ts +++ b/src/Gui/Language/FreeCAD_be.ts @@ -117,7 +117,7 @@ Змяніць - + Import Імпарт @@ -188,8 +188,8 @@ Размясціць - + Transform Пераўтварыць @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Задаць выпадковы колер @@ -421,42 +421,42 @@ EditMode - + Default Першапачаткова - + The object will be edited using the mode defined internally to be the most appropriate for the object type Аб'ект будзе зменены з ужываннем рэжыму, вызначанага ўнутры як найбольш прыдатны для дадзенага тыпу аб'екта - + Transform Пераўтварыць - + The object will have its placement editable with the Std TransformManip command Размяшчэнне аб'екту будзе даступна для змены з дапамогай каманды Std TransformManip - + Cutting Абрэзка - + This edit mode is implemented as available but currently does not seem to be used by any object Рэжым змены рэалізаваны як даступны, але ў цяперашні час, падобна, не ўжываецца ні адным аб'ектам - + Color Колер - + The object will have the color of its individual faces editable with the Part FaceColors command Колер асобных граняў аб'екта можна будзе мяняць з дапамогай каманды Part FaceColors @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Налады камеры - + Orientation Арыентацыя - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Бягучы выгляд @@ -2458,72 +2458,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Скінуць старонку '%1'... - + Resets the user settings for the page '%1' Скінуць карыстальніцкія налады старонкі '%1' - + Reset group '%1'... Скінуць суполку '%1'... - + Resets the user settings for the group '%1' Скінуць карыстальніцкія налады суполкі '%1' - + Reset all... Скінуць усё... - + Resets the user settings entirely Цалкам скінуць карыстальніцкія налады - + Clear user settings Ачысціць карыстальніцкія налады - + Do you want to clear all your user settings? Ці жадаеце вы ачысціць усе свае карыстальніцкія налады? - + If you agree all your settings will be cleared. Калі вы згодныя, усе вашыя налады будуць вычышчаныя. - + Wrong parameter Няправільная налада - + Restart required Патрабуецца перазапуск - + You must restart FreeCAD for changes to take effect. Вы павінны перазапусціць FreeCAD, каб змены былі ўжытыя. - + Restart now Перазапусціць зараз - + Restart later Перазапусціць пазней @@ -2858,34 +2858,34 @@ in the corner -- in % of height/width of viewport Памер прадстаўлення асноўнай сістэмы каардынат у куце - у % ад вышыні/шырыні вобласці выгляду - + Axis cross will be shown by default at file opening or creation Скрыжаванне восей будзе паказвацца першапачаткова пры адкрыцці ці стварэнні файла - + Show axis cross by default Першапачаткова паказаць скрыжаванне восей - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Час, які неабходны для апошняй аперацыі, і выніковая частата кадраў будуць паказаныя ў левым ніжнім куце адчыненых файлаў - + Show counter of frames per second Паказаць лічыльнік кадраў у секунду - + Rendering Візуалізацыя - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2894,22 +2894,22 @@ Changing this option requires a restart of the application. Для змены налады патрабуецца перазапуск праграмы. - + Use software OpenGL Ужыць праграмнае забеспячэнне OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Ужыць OpenGL VBO (аб'ект буфера вяршыняў) - + Render cache Кэшаванне візуалізацыі - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2928,7 +2928,17 @@ VBO забяспечваюць значны прырост эфектыўнас Не забудзьцеся паведаміць аб гэтай уключанай наладзе пры звароце па падтрымку на форумах FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2943,92 +2953,92 @@ but slower response to any scene changes. 3) 'Цэнтралізаванае', уручную адключыць кэшаванне на ўсіх вузлах пастаўшчыка ўяўленняў, і кэшаванне толькі на каранёвым графічным вузле выявы. Гэта забяспечвае самую высокую хуткасць візуалізацыі, але больш павольную рэакцыю на любыя змены кадра. - + Auto Аўтаматычнае - + Distributed Размеркаванае - + Centralized Цэнтралізаванае - + Anti-Aliasing Згладжванне - + What kind of multisample anti-aliasing is used Які выгляд шматпраходнага згладжвання ўжываецца - + None Нічога - + Line Smoothing Згладжванне ліній - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Празрыстыя аб'екты: - + Render types of transparent objects Тып візуалізацыі празрыстых аб'ектаў - + One pass Адзін праход - + Backface pass Праход ззаду - + Marker size: Памер маркера: - + Size of vertices in the Sketcher, TechDraw and other workbenches Памер вяршынь у варштаце Эскізу, Тэхнічным чарцяжы і іншых варштатах - + Eye to eye distance for stereo modes Адлегласць паміж вачамі для стэрэа рэжымаў - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3036,48 +3046,48 @@ bounding box size of the 3D object that is currently displayed. Азначанае значэнне з'яўляецца каэфіцыентам, якое будзе памнажацца на памер габарытаў трохмернага аб'екта, які ў бягучы час адлюстроўваецца. - + Backlight is enabled with the defined color Асвятленне ўключана з вызначаным колерам - - + + Backlight color Колер асвятлення - + Intensity Інтэнсіўнасць - + Intensity of the backlight Інтэнсіўнасць асвятлення - + Camera type Тып камеры - + Objects will appear in a perspective projection Аб'екты будуць адлюстроўвацца ў перспектыўнай праекцыі - + Perspective renderin&g Перспектыўная &візуалізацыя - + Objects will be projected in orthographic projection Аб'екты будуць праецыравацца ў артаганальнай праекцыі - + Or&thographic rendering &Артаганальная візуалізацыя @@ -3089,57 +3099,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Згладжванне - + Open a new viewer or restart %1 to apply anti-aliasing changes. Адчыніць новы праглядальнік, альбо перазапусціць %1, каб прымяніць змены згладжвання. @@ -4026,7 +4036,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Навігацыя @@ -4112,68 +4122,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Колер - + Base color for all elements Асноўны колер для ўсіх элементаў - + Rotation center indicator Індыкатар цэнтра вярчэння - + Sphere size Памер сферы - + Color and transparency Колер і празрыстасць - + The size of the rotation center indicator Памер індыкатару цэнтра вярчэння - + The color of the rotation center indicator Колер індыкатару цэнтра вярчэння - + 3D Navigation Трохмерная навігацыя - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Спіс налад кнопак мышы для кожнай абранай налады навігацыі. Абярыце набор, потым націсніце кнопку, каб паглядзець названыя наладкі. - + Mouse... Дэталі стылю навігацыі... - + Navigation settings set Набор налад навігацыі - + Orbit style Стыль арбіты - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4184,136 +4204,136 @@ Free Turntable: the part will be rotated around the z-axis. Свабодны паваротны круг: дэталь будзе круціцца вакол восі z. - + Turntable Паваротны круг - + Trackball Трэкбол - + Free Turntable Свабодны паваротны круг - + Rotation mode Рэжым вярчэння - + Rotations in 3D will use current cursor position as center for rotation Вярчэнне ў трохмерным прадстаўленні будзе ўжываць бягучае становішча курсора ў якасці цэнтру для вярчэння - + Window center Цэнтр акна - + Drag at cursor Перанесці да паказальніка - + Object center Цэнтр аб'екту - + Default camera orientation Першапачатковая арыентацыя камеры - + Default camera orientation when creating a new document or selecting the home view Першапачатковая арыентацыя камеры пры стварэнні новага дакументу ці выбару пачатковага выгляду - + Camera zoom Маштаб камеры - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Задаць маштаб камеры для новых дакументаў. Значэнне - дыяметр сферы, які павінен змясціцца на экране. - + mm мм - + Animations Анімацыі - + Enable spinning animations that are used in some navigation styles after dragging Уключыце анімацыю вярчэння, якая ўжываецца ў некаторых стылях навігацыі пасля перацягвання - + Enable spinning animations Уключыць анімацыю вярчэння - + Duration of navigation animations that have a fixed duration Працягласць анімацыі навігацыі, якае мае фіксаваную працягласць - + Animation duration Працягласць анімацыі - + The duration of navigation animations in milliseconds Працягласць анімацыі навігацыі (у мілісекундах) - + Zoom step Крок маштабавання - + Zoom operations will be performed at position of mouse pointer Аперацыі маштабавання будуць выконвацца ў становішчы паказальніка мышы - + Zoom at cursor Маштаб на паказальніку - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Наколькі будзе маштабавана. Крок маштабавання '1' азначае каэфіцыент 7.5 для кожнага кроку маштабавання. - + Direction of zoom operations will be inverted Напрамак аперацый маштабавання будзе інвертаваны - + Invert zoom Інвертаваць маштаб - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4322,57 +4342,57 @@ Mouse tilting is not disabled by this setting. Нахіл мышы гэтай наладай не адключаны. - + Disable touchscreen tilt gesture Адключыць жэст нахілу для сэнсарнага экрану - + Isometric Ізаметрычны - + Dimetric Дыметрычны - + Trimetric Трыметрычны - + Top Зверху - + Front Спераду - + Left Злева - + Right Справа - + Rear Ззаду - + Bottom Знізу - + Custom Карыстальніцкі @@ -5636,7 +5656,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Выгляд уласцівасці @@ -6101,15 +6121,15 @@ Do you want to save your changes? Фармат PDF - + Graphviz format Фармат Graphviz + - Export graph Экспартаваць дыяграму @@ -6692,14 +6712,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Від - - + + Data Дадзеныя @@ -7023,7 +7043,7 @@ Do you want to specify another directory? Position - Становішча + Position @@ -7675,22 +7695,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Экспартаваць у PDF - + PDF file Файл PDF - + Opening file failed Немагчыма адчыніць файл - + Can't open file '%1' for writing. Не атрымалася адчыніць файл '%1' для запісу. @@ -7950,47 +7970,47 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Невядомы тып файла - - + + Cannot open unknown filetype: %1 Не атрмылася адчыніць невядомы тып файла: %1 - + Export failed Экспартаваць не атрымалася - + Cannot save to unknown filetype: %1 Не атрымалася захаваць у невядомым тыпе файла: %1 - + Workbench failure Памылка загрузкі варштату - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ваша сістэма працуе пад кіраваннем OpenGL%1.%2. Для FreeCAD патрабуецца OpenGL версіі 2.0 ці вышэй. Калі ласка, абновіце ваш графічны драйвер і/ці відэакарту па неабходнасці. - + Invalid OpenGL Version Хібная версія OpenGL @@ -8041,8 +8061,8 @@ Do you want to specify another directory? Экспарт у PDF... - + Unsaved document Незахаваны дакумент @@ -8612,7 +8632,7 @@ Please open a browser window and type in: http://localhost:%1. Не атрымалася знайсці файл %1 ні ў %2, ні ў %3 - + Navigation styles Стылі навігацыі @@ -8910,8 +8930,8 @@ the current copy will be lost. Пераключыць накладанне - + Toggle floating window Пераключыць акно, якое плавае @@ -8927,199 +8947,194 @@ the current copy will be lost. Націсніце <Esc>, каб схаваць падказку - + UI Інтэрфейс карыстальніка - + Tree view Прагляд дрэва - + Item background color Колер фону элемента - + Item background padding Запаўненне фону элемента - + Resizable columns Памеры слупкоў, якія мяняюцца - - Show item checkbox - Паказаць птушку элемента - - - + Hide extra column Схаваць дадатковы слупок - + Hide scroll bar Схаваць паласу пракруткі - + Hide header Схаваць загаловак - + IconSize Памер гузіка - + FontSize Памер шрыфту - + ItemSpacing Адлегласць паміж элементамі - + Overlay Накладанне - + Hide tab bar Схаваць панэль укладак - + Hide property view scroll bar Схаваць паласу пракруткі выгляду ўласцівасцяў - + Auto hide in non 3D view Аўтаматычна хаваць, калі не трохмернае прадстаўленне - + Auto mouse pass through Аўтаматычны пераход мышы - + Auto mouse wheel pass through Аўтаматычны пераход праз кола мышы - + Delay mouse wheel pass through (ms) Затрымка пераходу праз кола мышы (мс) - + Alpha test radius Радыус альфа-тэсту - + Check Navigation Cube Праверыць куб навігацыі - + Hint trigger size Памер трыгеру падказкі - + Hint width Шырыня падказкі - + Left panel hint offset Зрушэнне панэлі падказак злева - + Left panel hint length Даўжыня панэлі падказак злева - + Right panel hint offset Зрушэнне панэлі падказак справа - + Right panel hint length Даўжыня панэлі падказак справа - + Top panel hint offset Зрушэнне панэлі падказак зверху - + Top panel hint length Даўжыня панэлі падказак зверху - + Bottom panel hint offset Зрушэнне панэлі падказак знізу - + Bottom panel hint length Даўжыня панэлі падказак знізу - + Hint show tab bar Падказка, каб паказаць панэль укладак - + Hint delay (ms) Затрымка падказкі (мс) - + Splitter auto hide delay (ms) Затрымка аўтаматычнага хавання падзельніка (мс) - + Activate on hover Задзейнічаць пры навядзенні курсора - + Layout delay (ms) Затрымка макету (мс) - + Animation duration (ms) Працягласць анімацыі (мс) - + Animation curve type Тып крывой анімацыі Active object - Active object + Бягучы аб'ект @@ -10047,8 +10062,8 @@ the current copy will be lost. Стварыць новы пусты дакумент - + Unnamed Без назвы @@ -12122,17 +12137,17 @@ after FreeCAD launches XY-Plane - XY-Plane + Плоскасць XY XZ-Plane - XZ-Plane + Плоскасць XZ YZ-Plane - YZ-Plane + Плоскасць YZ @@ -12142,7 +12157,7 @@ after FreeCAD launches Offset: - Offset: + Зрушэнне: @@ -12357,12 +12372,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Рухомы куб навігацыі - + Drag and place NaviCube Перацягнуць у Куб навігацыі @@ -12370,32 +12385,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT Спераду - + TOP Зверху - + RIGHT Справа - + REAR Сзаду - + BOTTOM Знізу - + LEFT Злева @@ -12637,7 +12652,7 @@ after FreeCAD launches Default unit system: - Default unit system: + Першапачатковая сістэма адзінак вымярэння: @@ -12882,47 +12897,47 @@ display the splash screen Карыстальніцкі (%1px) - + Combo View Камбінаваны прагляд - + TreeView and PropertyView Прагляд дрэва і ўласцівасцяў - + Preference Pack Name Назва Пакета перавагі - + Tags Меткі - + Apply Прымяніць - + Apply the %1 preference pack Прымяніць пакет перавагі %1 - + Choose a FreeCAD config file to import Абраць файл наладаў FreeCAD для імпартавання - + File exists Файл інсуе - + A preference pack with that name already exists. Overwrite? Пакет перавагі з такой назвай ужо існуе. Перазапісаць? @@ -13647,7 +13662,7 @@ the region are non-opaque. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Паказаць выгляд уласцівасці, у якім адлюстроўваюцца ўласцівасці абранага аб'екту. diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 7b62e10ae9..14e8b684c1 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -117,7 +117,7 @@ Edita - + Import Importa @@ -188,8 +188,8 @@ Posició - + Transform Transformar @@ -421,42 +421,42 @@ EditMode - + Default Per defecte - + The object will be edited using the mode defined internally to be the most appropriate for the object type L'objecte s'editarà fent servir el mode definit internament com el més apropiat segons el tipus d'objecte - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command L'objecte tindrà el seu lloc editable amb el comandament Std TransformManip - + Cutting Tall - + This edit mode is implemented as available but currently does not seem to be used by any object Aquest mode d'edició es troba implementat com a disponible, però ara mateix no sembla que cap objecte l'usi - + Color Color - + The object will have the color of its individual faces editable with the Part FaceColors command L'objecte tindrà el color de les seves cares individuals editables amb el comandament Part FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Paràmetres de la càmera - + Orientation Orientació - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -2452,72 +2452,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Esborra els paràmetres d'usuari - + Do you want to clear all your user settings? Voleu esborrar tots els vostres paràmetres d'usuari? - + If you agree all your settings will be cleared. Si hi esteu d'acord, tots els vostres paràmetres s'esborraran. - + Wrong parameter El paràmetre és incorrecte - + Restart required Cal que reinicieu - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Reinicia ara - + Restart later Reinicia més tard @@ -2854,36 +2854,36 @@ in the corner -- in % of height/width of viewport a la cantonada -- en % d'alçada/amplada de la finestra gràfica - + Axis cross will be shown by default at file opening or creation Els eixos de coordenades es mostraran per defecte en obrir o crear un arxiu - + Show axis cross by default Mostra els eixos de coordenades per defecte - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files El temps necessari per a l'última operació i els fotogrames per segon resultants es mostraran a la cantonada inferior esquerra dels fitxers oberts - + Show counter of frames per second Mostra el comptador d'imatges per segon - + Rendering Renderització - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2892,22 +2892,22 @@ Changing this option requires a restart of the application. Per modificar aquesta opció cal reiniciar l'aplicació. - + Use software OpenGL Utilitza l'OpenGL per software - + Use OpenGL VBO (Vertex Buffer Object) Empra OpenGL VBO (Objecte de memòria intermèdia de vèrtex) - + Render cache Memòria cau de renderització - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2930,7 +2930,17 @@ diferents, que van des d’anomalies gràfiques fins a errors crítics de la GPU d'informar que aquesta opció està habilitada quan cerqueu ajuda en els fòrums de FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2945,92 +2955,92 @@ Hi ha 3 opcions disponibles per a aconseguir-ho: 3) «Centralitzada», desactiveu manualment la memòria cau en tots els nodes de tots els proveïdors de vista i només la memòria cau en el node arrel del gràfic de l'escena. Això ofereix una velocitat de renderització més ràpida però una resposta més lenta en tots els canvis d'escena. - + Auto Auto - + Distributed Distribuïda - + Centralized Centralitzada - + Anti-Aliasing Antialiàsing - + What kind of multisample anti-aliasing is used Quin tipus d’antialiàsing multimostra s’utilitza - + None Cap - + Line Smoothing Suavitzat de línies - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objectes transparents: - + Render types of transparent objects Tipus de renderitzat pels objectes transparents - + One pass Una passada - + Backface pass Passada per la cara posterior - + Marker size: Mida del marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Distància entre els ulls per a la visió estereoscòpica - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3039,48 +3049,48 @@ El valor especificat és un factor que es multiplicarà amb la mida de la caixa contenidora de l'objecte 3D que es mostra actualment. - + Backlight is enabled with the defined color La retroil·luminació s'ha activat amb el color definit - - + + Backlight color Color de la retroil·luminació - + Intensity Intensitat - + Intensity of the backlight Intensitat de la retroil·luminació - + Camera type Tipus de càmera - + Objects will appear in a perspective projection Els objectes apareixeran en una projecció en perspectiva - + Perspective renderin&g &Renderització en perspectiva - + Objects will be projected in orthographic projection Els objectes es projectaran en projecció ortogràfica - + Or&thographic rendering Renderització or&togràfica @@ -3092,57 +3102,57 @@ mida de la caixa contenidora de l'objecte 3D que es mostra actualment. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Antialiàsing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Obriu un visualitzador nou o reinicieu %1 perquè s'apliquin els canvis d'antialiàsing. @@ -4034,7 +4044,7 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navegació @@ -4120,68 +4130,78 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Color - + Base color for all elements Color base per tots els elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navegació 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Mostra les configuracions del botó del ratolí per a cada paràmetre de navegació escollit. Seleccioneu un paràmetre i, a continuació, premeu el botó per a veure aquestes configuracions. - + Mouse... Ratolí... - + Navigation settings set Conjunt de configuracions de navegació - + Orbit style Estil d'òrbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4192,193 +4212,193 @@ Plataforma giratòria (Turntable): La peça girarà sobre l'eix z (amb eixos res Plataforma giratòria lliure: la peça girarà sobre l'eix z. - + Turntable Torn - + Trackball Ratolí de bola - + Free Turntable Plataforma giratòria lliure - + Rotation mode Mode de rotació - + Rotations in 3D will use current cursor position as center for rotation Les rotacions en 3D utilitzaran la posició actual del cursor com a centre de rotació - + Window center Centre de la finestra - + Drag at cursor Arrossega al cursor - + Object center Centre de l'objecte - + Default camera orientation Orientació de la càmera per defecte - + Default camera orientation when creating a new document or selecting the home view Orientació de la càmera per defecte en crear un nou document o en seleccionar la vista inicial - + Camera zoom Zoom de Càmera - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Configura el zoom de la càmera per als nous documents. El valor és el diàmetre de l’esfera per a ajustar-se a la pantalla. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Les operacions del zoom es realitzaran en la posició del punter del ratolí - + Zoom at cursor Zoom al cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. En quant serà ampliat. Un valor de '1' implica un factor de 7,5 per cada grau d'ampliació. - + Direction of zoom operations will be inverted La direcció de les operacions de zoom s’invertirà - + Invert zoom Invertix el zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. Evita la inclinació de la vista quan s'està fent zoom amb els dits. Sols afecta l'estil de Navegació amb gestos. Aquesta opció no desactiva la inclinació del ratolí. - + Disable touchscreen tilt gesture Desactiva el gest d'inclinació de la pantalla tàctil - + Isometric Isomètrica - + Dimetric Dimètric - + Trimetric Trimètric - + Top Planta - + Front Alçat - + Left Esquerra - + Right Dreta - + Rear Posterior - + Bottom Inferior - + Custom Personalitzat @@ -5634,7 +5654,7 @@ seleccionats abans d'obrir aquest diàleg Gui::DockWnd::PropertyDockView - + Property View Visualització de les propietats @@ -6098,15 +6118,15 @@ Do you want to save your changes? Format PDF - + Graphviz format Graphviz format + - Export graph Exporta el gràfic @@ -6686,14 +6706,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Vista - - + + Data Dades @@ -7664,22 +7684,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporta a PDF - + PDF file Arxiu PDF - + Opening file failed No s'ha pogut obrir el fitxer - + Can't open file '%1' for writing. No s'ha pogut obrir el fitxer '%1' per escriure-hi. @@ -7939,45 +7959,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype El tipus de fitxer és desconegut. - - + + Cannot open unknown filetype: %1 No es pot obrir el tipus de fitxer desconegut: %1 - + Export failed Exportació fallida - + Cannot save to unknown filetype: %1 No es pot desar el tipus de fitxer desconegut: %1 - + Workbench failure Fallada del banc de treball - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8028,8 +8048,8 @@ Do you want to specify another directory? S'està exportant a PDF... - + Unsaved document El document no s'ha desat @@ -8594,7 +8614,7 @@ Please open a browser window and type in: http://localhost:%1. No s'ha trobat el fitxer %1 ni en %2 ni en %3 - + Navigation styles Estils de navegació @@ -8893,8 +8913,8 @@ la còpia actual es perdrà. Toggle overlay - + Toggle floating window Toggle floating window @@ -8910,192 +8930,187 @@ la còpia actual es perdrà. Press ESC to hide hint - + UI UI - + Tree view Vista d'arbre - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10028,8 +10043,8 @@ la còpia actual es perdrà. Crea un document buit nou - + Unnamed Sense nom @@ -12339,12 +12354,12 @@ en iniciar FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Cub de navegació movible - + Drag and place NaviCube Arrossega i posiciona el NaviCube @@ -12352,32 +12367,32 @@ en iniciar FreeCAD NaviCubeSettings - + FRONT FRONT - + TOP DALT - + RIGHT DRETA - + REAR DARRERA - + BOTTOM BAIX - + LEFT ESQUERRA @@ -12859,47 +12874,47 @@ quan arrenca FreeCAD. Si aquesta opció està marcada, FreeCAD en mostrarà una< Personalitzat (%1px) - + Combo View Visualització combinada - + TreeView and PropertyView Vista d'arbre i vista de les propietats - + Preference Pack Name Nom del paquet de preferències - + Tags Etiquetes - + Apply Aplica - + Apply the %1 preference pack Apliqueu el paquet de preferències %1 - + Choose a FreeCAD config file to import Trieu un fitxer de configuració del FreeCAD per importar - + File exists El fitxer ja existeix - + A preference pack with that name already exists. Overwrite? Ja existeix un paquet de preferències amb el mateix nom. Voleu sobreescriure'l? diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index 57ca66d529..07126c6ef9 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -117,7 +117,7 @@ Upravit - + Import Import @@ -188,8 +188,8 @@ Umístění - + Transform Transformace @@ -421,42 +421,42 @@ EditMode - + Default Výchozí - + The object will be edited using the mode defined internally to be the most appropriate for the object type Objekt bude upraven pomocí vnitřního režimu tak, aby byl nejvhodnější pro typ objektu - + Transform Transformace - + The object will have its placement editable with the Std TransformManip command Objekt bude mít upravitelné umístění pomocí příkazu Std TransformManip - + Cutting Řez - + This edit mode is implemented as available but currently does not seem to be used by any object Tento režim úprav je implementován jako dostupný, ale v současné době se zdá, že jej žádný objekt nepoužívá - + Color Barva - + The object will have the color of its individual faces editable with the Part FaceColors command Objekt bude mít barvu svých jednotlivých ploch upravitelných příkazem část FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Nastavení kamery - + Orientation Orientace - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuální pohled @@ -2455,72 +2455,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Obnovit stranu '%1'... - + Resets the user settings for the page '%1' Obnoví uživatelská nastavení pro stranu '%1' - + Reset group '%1'... Obnovit skupinu '%1'... - + Resets the user settings for the group '%1' Obnoví uživatelská nastavení pro skupinu '%1' - + Reset all... Obnovit vše... - + Resets the user settings entirely Obnoví všechna uživatelská nastavení - + Clear user settings Vymazat uživatelská nastavení - + Do you want to clear all your user settings? Chcete vymazat všechna uživatelská nastavení? - + If you agree all your settings will be cleared. Pokud souhlasíte, budou všechna vaše nastavení vymazána. - + Wrong parameter Chybný parametr - + Restart required Je vyžadován restart - + You must restart FreeCAD for changes to take effect. Aby se změny projevily, musíte FreeCAD restartovat. - + Restart now Restartovat nyní - + Restart later Restartovat později @@ -2857,35 +2857,35 @@ in the corner -- in % of height/width of viewport v rohu -- v % výšky/šířky pohledu - + Axis cross will be shown by default at file opening or creation Ve výchozím nastavení bude zobrazen osový kříž při otevření nebo vytvoření souboru - + Show axis cross by default Zobrazit ve výchozím nastavení osový kříž - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Čas potřebný pro poslední operaci a výsledný frame rate bude zobrazena v levém dolním rohu v otevřených souborech - + Show counter of frames per second Zobrazit FPS - + Rendering Vykreslování - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2894,22 +2894,22 @@ Changing this option requires a restart of the application. Změna této volby vyžaduje restart aplikace. - + Use software OpenGL Použít softwarové OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Použít OpenGL VBO (Vertex Buffer Object) - + Render cache Mezipaměť vykreslování - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2932,7 +2932,17 @@ problémů, od grafických anomálií až po chyby při pádu GPU. Nezapomeňte při hledání podpory na fóru FreeCADu oznámit, že je toto nastavení povoleno - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2949,92 +2959,92 @@ cache pouze v kořenovém uzlu grafu scény. To nabízí nejvyšší rychlost vy ale pomalejší odezvu na jakékoli změny scény. - + Auto Automaticky - + Distributed Distribuován - + Centralized Centrální - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used Jaký se používá druh vícenásobného antaliasování - + None Žádný - + Line Smoothing Vyhlazování čáry - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Průhledné objekty: - + Render types of transparent objects Vykreslovat typy průhledných objektů - + One pass Jeden průchod - + Backface pass Průchod zadní stranou - + Marker size: Velikost značky: - + Size of vertices in the Sketcher, TechDraw and other workbenches Velikost vrcholů v náčrtu, TechDraw a dalších pracovních prostředích - + Eye to eye distance for stereo modes Vzdálenost mezi oky pro stereo režimy - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3043,48 +3053,48 @@ Zadaná hodnota je koeficient pro vynásobení velikosti ohraničujícího kvádru 3D objektů, které jsou zobrazeny. - + Backlight is enabled with the defined color Podsvícení je zapnuto s definovanou barvou - - + + Backlight color Barva podsvícení - + Intensity Intenzita - + Intensity of the backlight Intenzita podsvícení - + Camera type Typ kamery - + Objects will appear in a perspective projection Objekty se objeví v perspektivní projekci - + Perspective renderin&g Perspektivní renderování &g - + Objects will be projected in orthographic projection Objekty budou promítnuty v ortografické projekci - + Or&thographic rendering Or&tografické renderování @@ -3096,57 +3106,57 @@ ohraničujícího kvádru 3D objektů, které jsou zobrazeny. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Otevřete nové okno nebo restartujte %1 pro aplikaci změn anti-aliasingu. @@ -4036,7 +4046,7 @@ Můžete také použít tuto formu: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigace @@ -4122,68 +4132,78 @@ Můžete také použít tuto formu: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Barva - + Base color for all elements Základní barva pro všechny prvky - + Rotation center indicator Indikátor středu otáčení - + Sphere size Velikost koule - + Color and transparency Barva a průhlednost - + The size of the rotation center indicator Velikost indikátoru středu otáčení - + The color of the rotation center indicator Barva indikátoru středu otáčení - + 3D Navigation 3D navigace - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Seznam nastavení tlačítek myši pro každé zvolené nastavení navigace. Vyberte sadu a poté stiskněte tlačítko pro zobrazení uvedených konfigurací. - + Mouse... Myš... - + Navigation settings set Nastavení navigace - + Orbit style Styl orbitu - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4194,136 +4214,136 @@ Otočný stůl: díl se bude otáčet kolem osy z (s omezením os). Volný otočný stůl: díl se bude otáčet kolem osy z. - + Turntable Otočný stůl - + Trackball Trackball - + Free Turntable Volný otočný stůl - + Rotation mode Režim rotace - + Rotations in 3D will use current cursor position as center for rotation 3D Rotace bude používat aktuální polohu kurzoru jako střed rotace - + Window center Střed okna - + Drag at cursor Přetáhněte kurzorem - + Object center Střed objektu - + Default camera orientation Výchozí orientace kamery - + Default camera orientation when creating a new document or selecting the home view Výchozí orientace kamery při vytváření nového dokumentu nebo výběru domácího zobrazení - + Camera zoom Zoom kamery - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Nastaví přiblížení kamery pro nové dokumenty. Hodnota je průměr koule tak, aby se vešla na obrazovku. - + mm mm - + Animations Animace - + Enable spinning animations that are used in some navigation styles after dragging Povolte rotující animace, které se používají v některých stylech navigace po přetažení - + Enable spinning animations Povolit rotující animace - + Duration of navigation animations that have a fixed duration Trvání animací navigace s pevně stanovenou dobou trvání - + Animation duration Trvání animace - + The duration of navigation animations in milliseconds Trvání animací navigace v milisekundách - + Zoom step Krok přiblížení - + Zoom operations will be performed at position of mouse pointer Přiblížení bude provedeno na poloze kurzoru myši - + Zoom at cursor Přibližovat nad kurzorem - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Jak moc bude příblížen. Krok přiblížení "1" znamená faktor 7,5 pro každý krok přiblížení. - + Direction of zoom operations will be inverted Směr operace přiblížení bude obrácen - + Invert zoom Invertovat přiblížení - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4332,57 +4352,57 @@ Ovlivňuje pouze navigační styl gesta. Naklánění myší není v tomto nastavení zakázáno. - + Disable touchscreen tilt gesture Zakázat dotykové gesto naklánění - + Isometric Izometrie - + Dimetric Dimetrie - + Trimetric Trimetrie - + Top Horní - + Front Přední - + Left Vlevo - + Right Vpravo - + Rear Zadní - + Bottom Dole - + Custom Vlastní @@ -5639,7 +5659,7 @@ původně vybranými před otevřením tohoto dialogu Gui::DockWnd::PropertyDockView - + Property View Vlastnosti zobrazení @@ -6102,15 +6122,15 @@ Chcete uložit provedené změny? PDF formát - + Graphviz format Formát Graphvizu + - Export graph Exportovat graf @@ -6695,14 +6715,14 @@ V pravém pohledu jsou %2 body vybrány. Gui::PropertyView - - + + View Pohled - - + + Data Údaje @@ -7022,7 +7042,7 @@ Do you want to specify another directory? Position - Poloha + Position @@ -7673,22 +7693,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Export PDF - + PDF file PDF soubor - + Opening file failed Otevření souboru selhalo - + Can't open file '%1' for writing. Soubor "%1" nelze otevřít pro zápis. @@ -7948,45 +7968,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Neznámý typ souboru - - + + Cannot open unknown filetype: %1 Nelze otevřít neznámý typ souboru: %1 - + Export failed Export selhal - + Cannot save to unknown filetype: %1 Nelze uložit neznámý typ souboru: %1 - + Workbench failure Selhání v pracovním prostředí - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Tento systém běží na OpenGL %1.%2. FreeCAD vyžaduje OpenGL 2.0 nebo vyšší. Aktualizujte prosím své grafické ovladače a/nebo kartu podle potřeby. - + Invalid OpenGL Version Neplatná verze OpenGL @@ -8037,8 +8057,8 @@ Do you want to specify another directory? Exportovat PDF... - + Unsaved document Neuložený dokument @@ -8607,7 +8627,7 @@ Prosím, otevřete okno prohlížeče a zadejte: http://localhost:%1.Nelze najít soubor %1 %2 ani v %3 - + Navigation styles Styly navigace @@ -8908,8 +8928,8 @@ na aktuální kopii budou ztraceny. Přepnout překrytí - + Toggle floating window Přepnout plovoucí okno @@ -8925,192 +8945,187 @@ na aktuální kopii budou ztraceny. Stiskněte ESC pro skrytí náznaku - + UI Rozhraní - + Tree view Stromové zobrazení - + Item background color Barva pozadí položky - + Item background padding Výplň pozadí položky - + Resizable columns Rozšiřitelné sloupce - - Show item checkbox - Zobrazit zaškrtávátko položky - - - + Hide extra column Skrýt extra sloupec - + Hide scroll bar Skrýt posuvník - + Hide header Skrýt záhlaví - + IconSize Velikost ikon - + FontSize Velikost písma - + ItemSpacing Mezery mezi položkami - + Overlay Překrytí - + Hide tab bar Skrýt titulek - + Hide property view scroll bar Skrýt posuvník vlastností - + Auto hide in non 3D view Automaticky skrýt v jiném než 3D pohledu - + Auto mouse pass through Automaticky projít skrz myší - + Auto mouse wheel pass through Automaticky projít skrz kolečkem myši - + Delay mouse wheel pass through (ms) Zpoždění projítí skrz kolečkem myši (ms) - + Alpha test radius Poloměr testu alfy - + Check Navigation Cube Zkontrolovat navigační kostku - + Hint trigger size Šířka spuštění náznaku - + Hint width Šířka náznaku - + Left panel hint offset Odsazení náznaku levého panelu - + Left panel hint length Délka náznaku levého panelu - + Right panel hint offset Odsazení náznaku pravého panelu - + Right panel hint length Délka náznaku pravého panelu - + Top panel hint offset Odsazení náznaku horního panelu - + Top panel hint length Délka náznaku horního panelu - + Bottom panel hint offset Odsazení náznaku dolního panelu - + Bottom panel hint length Délka náznaku dolního panelu - + Hint show tab bar Zobrazit titulek na náznaku - + Hint delay (ms) Zpoždění náznaku (ms) - + Splitter auto hide delay (ms) Zpoždění automatické skrytí rozdělovače (ms) - + Activate on hover Aktivovat při přejetí - + Layout delay (ms) Zpoždění rozložení (ms) - + Animation duration (ms) Trvání animace (ms) - + Animation curve type Typ animační křivky @@ -10043,8 +10058,8 @@ na aktuální kopii budou ztraceny. Vytvořit nový prázdný dokument - + Unnamed Nepojmenovaný @@ -12354,12 +12369,12 @@ po spuštění FreeCADu NaviCubeDraggableCmd - + Movable navigation cube Pohyblivá navigační krychle - + Drag and place NaviCube Přetáhnout a umístit NaviCube @@ -12367,32 +12382,32 @@ po spuštění FreeCADu NaviCubeSettings - + FRONT PŘEDNÍ - + TOP VRŠEK - + RIGHT VPRAVO - + REAR ZADNÍ - + BOTTOM SPODEK - + LEFT VLEVO @@ -12879,47 +12894,47 @@ FreeCAD toto okno zobrazí Vlastní (%1px) - + Combo View Kombinované zobrazení - + TreeView and PropertyView TreeView a PropertyView - + Preference Pack Name Název balíčku předvoleb - + Tags Štítky - + Apply Použít - + Apply the %1 preference pack Použít balíček předvoleb %1 - + Choose a FreeCAD config file to import Vyberte konfigurační soubor FreeCAD pro import - + File exists Soubor existuje - + A preference pack with that name already exists. Overwrite? Balíček předvoleb s tímto názvem již existuje. Přepsat? diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index c0c9da3a1f..2e217799d8 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -117,7 +117,7 @@ Bearbeiten - + Import Importieren @@ -188,8 +188,8 @@ Positionierung - + Transform Transformieren @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Zufällige Farbe festlegen @@ -421,42 +421,42 @@ EditMode - + Default Standard - + The object will be edited using the mode defined internally to be the most appropriate for the object type Das Objekt wird mit dem intern als dafür am geeignetsten gekennzeichneten Modus bearbeitet - + Transform Bewegen - + The object will have its placement editable with the Std TransformManip command Die Objektplatzierung wird mit dem Befehl Std TransformManip editierbar sein - + Cutting Schneiden - + This edit mode is implemented as available but currently does not seem to be used by any object Dieser Bearbeitungsmodus ist als verfügbar implementiert, scheint aber von keinem Objekt verwendet zu werden - + Color Farbe - + The object will have the color of its individual faces editable with the Part FaceColors command Das Objekt wird seine einzelnen Flächenfarben mit dem Befehl Part FaceColors editierbar haben @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameraeinstellungen - + Orientation Ausrichtung - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuelle Ansicht @@ -2346,7 +2346,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Type - Art + Typ @@ -2456,72 +2456,72 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Menüreiter '%1' zurücksetzen... - + Resets the user settings for the page '%1' Setzt die Benutzereinstellungen für den Menüreiter '%1 ' zurück - + Reset group '%1'... Gruppe '%1 ' zurücksetzen... - + Resets the user settings for the group '%1' Setzt die Benutzereinstellungen für die Gruppe '%1 ' zurück - + Reset all... Alles zurücksetzen... - + Resets the user settings entirely Setzt alle Benutzereinstellungen zurück - + Clear user settings Benutzereinstellungen löschen - + Do you want to clear all your user settings? Möchten Sie alle Ihre Benutzereinstellungen löschen? - + If you agree all your settings will be cleared. Wenn Sie einverstanden sind werden alle ihre Einstellungen gelöscht. - + Wrong parameter Falscher Parameter - + Restart required Neustart erforderlich - + You must restart FreeCAD for changes to take effect. FreeCAD muss neu gestartet werden, damit die Änderungen wirksam werden. - + Restart now Jetzt neu starten - + Restart later Später neu starten @@ -2742,7 +2742,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Clear - Leeren + Löschen @@ -2826,7 +2826,7 @@ Wählen Sie bitte ein anderes Verzeichnis aus. 3D View - 3D-Viewer + 3D-Ansicht @@ -2858,35 +2858,35 @@ in the corner -- in % of height/width of viewport in der Ecke -- in % von der Höhe/Breite des Ansichtsfensters - + Axis cross will be shown by default at file opening or creation Achsenkreuz wird standardmäßig beim Öffnen oder Erstellen einer Datei angezeigt - + Show axis cross by default Achsenkreuz standardmäßig anzeigen - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Die benötigte Zeit für die letzte Operation und die resultierende Bildrate wird in der linken unteren Ecke in geöffneten Dateien angezeigt - + Show counter of frames per second Anzeigen der Datenrate pro Sekunde - + Rendering Rendern - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. Das Ändern dieser Option erfordert einen Neustart der Anwendung. - + Use software OpenGL Software OpenGL verwenden - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO (Vertex Buffer Object) verwenden - + Render cache Render Cache-Speicher - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2929,7 +2929,17 @@ im Grafikspeicher und nicht im Systemspeicher liegen und somit direkt durch die Hinweis: Manchmal kann diese Funktion zu unerwarteten Problemen führen, die von grafischen Anomalien bis hin zu GPU-Absturzfehlern reichen. Wenn Sie Unterstützung in freeCAD-Foren suchen, sollten Sie darauf hinweisen, dass Sie diese Funktion aktiviert haben. - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2945,92 +2955,92 @@ Es stehen 3 Optionen zur Verfügung: nur am Wurzelknoten des Szenegraphen cachen. Dies bietet die schnellste Rendering-Geschwindigkeit aber eine langsamere Reaktion auf Szenenänderungen. - + Auto Automatisch - + Distributed Verteilt - + Centralized Zentralisiert - + Anti-Aliasing Kantenglättung - + What kind of multisample anti-aliasing is used Welche Art von Multisample Anti-Aliasing wird verwendet - + None Kein - + Line Smoothing Linie glätten - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Transparente Objekte: - + Render types of transparent objects Renderarten für transparente Objekte - + One pass Einzelner Render-Durchgang - + Backface pass Zusätzlicher Rückseiten-Render-Durchgang - + Marker size: Markergröße: - + Size of vertices in the Sketcher, TechDraw and other workbenches Größe der Knotenpunkte im Sketcher, TechDraw und anderen Arbeitsbereichen - + Eye to eye distance for stereo modes Augenabstand für Stereo-Modi - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3038,48 +3048,48 @@ bounding box size of the 3D object that is currently displayed. Der angegebene Wert ist ein Faktor, der mit der Größe des Hüllquaders des gerade angezeigten 3D-Objekts multipliziert wird. - + Backlight is enabled with the defined color Die Hintergrundbeleuchtung wird mit der definierten Farbe aktiviert - - + + Backlight color Farbe der Hintergrundbeleuchtung - + Intensity Intensität - + Intensity of the backlight Intensität der Hintergrundbeleuchtung - + Camera type Kameratyp - + Objects will appear in a perspective projection Objekte werden in einer perspektivischen Projektion angezeigt - + Perspective renderin&g Perspektivische Darstellun&g - + Objects will be projected in orthographic projection Objekte werden in orthogonaler Projektion abgebildet - + Or&thographic rendering Or&thogonale Darstellung @@ -3091,57 +3101,57 @@ Der angegebene Wert ist ein Faktor, der mit der Größe des Hüllquaders des ger Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Kantenglättung - + Open a new viewer or restart %1 to apply anti-aliasing changes. Öffnen Sie ein neues Fenster oder starten Sie %1 neu, um Änderungen an der Kantenglättung zu übernehmen. @@ -4032,7 +4042,7 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navigation @@ -4118,68 +4128,78 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Farbe - + Base color for all elements Grundfarbe für alle Elemente - + Rotation center indicator Drehpunkt-Markierung - + Sphere size Kugelgröße - + Color and transparency Farbe und Transparenz - + The size of the rotation center indicator Größe der Drehpunkt-Markierung - + The color of the rotation center indicator Farbe der Drehpunkt-Markierung - + 3D Navigation 3D-Navigation - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Listet die Konfiguration der Maustaste für jede ausgewählte Navigationseinstellung auf. Wählen Sie eine Einstellung aus und drücken Sie dann die Schaltfläche, um die Einstellungen anzuzeigen. - + Mouse... Maus... - + Navigation settings set Die Einstellungen der Navigationsleiste wurden gespeichert - + Orbit style Orbit-Stil - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4190,136 +4210,136 @@ Drehtisch: das Teil wird um die z-Achse gedreht (mit eingeschränkten Achsen). freier Drehtisch: Das Teil wird um die z-Achse gedreht. - + Turntable Drehscheibe - + Trackball Trackball - + Free Turntable Freie Drehscheibe - + Rotation mode Art der Drehung - + Rotations in 3D will use current cursor position as center for rotation Drehen in 3D wird die aktuelle Cursorposition als Drehmittelpunkt verwenden - + Window center Um die Fenstermitte - + Drag at cursor Um den Mauszeiger - + Object center Um das Objektzentrum - + Default camera orientation Standard-Kameraausrichtung - + Default camera orientation when creating a new document or selecting the home view Standard-Kameraorientierung für neue Dokumente oder bei Auswahl der Home-Ansicht - + Camera zoom Kamera-Zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Legt den Kamera-Zoom für neue Dokumente fest. Der Wert ist der Durchmesser der Kugel, der auf den Bildschirm passt. - + mm mm - + Animations Animationen - + Enable spinning animations that are used in some navigation styles after dragging Drehungsanimationen aktivieren, die in einigen Navigationsstilen nach dem Ziehen verwendet werden - + Enable spinning animations Drehungsanimationen aktivieren - + Duration of navigation animations that have a fixed duration Die Dauer von Navigationsanimationen, die eine festgelegte Laufzeit haben - + Animation duration Dauer der Animation - + The duration of navigation animations in milliseconds Die Dauer der Navigationsanimationen in Millisekunden - + Zoom step Zoom-Schritt - + Zoom operations will be performed at position of mouse pointer Zoom-Operationen werden an der Position des Mauszeigers ausgeführt - + Zoom at cursor Zoom an Cursorposition - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Wie stark vergrößert werden soll. Zoom-Schritt von '1' bedeutet für jeden Zoom-Schritt einen Faktor von 7,5. - + Direction of zoom operations will be inverted Richtung der Zoom-Operationen wird umgekehrt - + Invert zoom Zoom umkehren - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4328,57 +4348,57 @@ Betrifft nur den Gestennavigationsstil. Das Neigen der Maus wird durch diese Einstellung nicht deaktiviert. - + Disable touchscreen tilt gesture Deaktiviere die Touchscreen Neige-Geste - + Isometric Isometrisch - + Dimetric Dimetrisch - + Trimetric Trimetrisch - + Top Draufsicht - + Front Vorderansicht - + Left Seitenansicht von links - + Right Seitenansicht von rechts - + Rear Rückansicht - + Bottom Untersicht - + Custom Benutzerdefiniert @@ -5634,7 +5654,7 @@ dieses Dialogs ausgewählt wurden Gui::DockWnd::PropertyDockView - + Property View Eigenschaften-Ansicht @@ -6099,15 +6119,15 @@ Sollen die Änderungen gespeichert werden? PDF-Format - + Graphviz format Graphviz-Format + - Export graph Graphik exportieren @@ -6690,14 +6710,14 @@ ODER ALT-Taste + rechte Maustaste drücken ODER Bild auf/Bild ab auf der Tastatu Gui::PropertyView - - + + View Ansicht - - + + Data Daten @@ -7672,22 +7692,22 @@ Möchten Sie ein anderes Verzeichnis angeben? Gui::View3DInventor - + Export PDF PDF exportieren - + PDF file PDF-Datei - + Opening file failed Fehler beim Öffnen der Datei - + Can't open file '%1' for writing. Datei '%1' kann nicht zum Schreiben geöffnet werden. @@ -7947,45 +7967,45 @@ Möchten Sie ein anderes Verzeichnis angeben? Python - - - + + + Unknown filetype Unbekannter Dateityp - - + + Cannot open unknown filetype: %1 Kann unbekannten Dateityp nicht öffnen: %1 - + Export failed Fehler beim Exportieren - + Cannot save to unknown filetype: %1 Kann in unbekannten Dateityp nicht speichern: %1 - + Workbench failure Wechsel von Arbeitsbereich fehlgeschlagen - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Dieses System verwendet OpenGL %1.%2. FreeCAD benötigt OpenGL 2.0 oder höher. Bitte aktualisieren Sie Ihren Grafiktreiber und/oder Ihre Grafikkarte wenn erforderlich. - + Invalid OpenGL Version Ungültige OpenGL-Version @@ -8036,8 +8056,8 @@ Möchten Sie ein anderes Verzeichnis angeben? Exportiert als PDF... - + Unsaved document Nicht gespeichertes Dokument @@ -8526,7 +8546,7 @@ Wählen Sie 'Abbrechen' um abzubrechen Clear - Löschen + Leeren @@ -8607,7 +8627,7 @@ Bitte starten Sie einen Browser und geben darin ein: http://localhost:%1.Kann Datei %1 weder in %2 noch in %3 finden - + Navigation styles Navigationsstile @@ -8905,8 +8925,8 @@ the current copy will be lost. Überlagerungsmodus umschalten - + Toggle floating window Schwebendes Fenster umschalten @@ -8922,199 +8942,194 @@ the current copy will be lost. ESC drücken, um den Hinweis zu verbergen - + UI Benutzeroberfläche - + Tree view Baumansicht - + Item background color Elementhintergrundfarbe - + Item background padding Element Hintergrund Innenabstand - + Resizable columns Spalten mit variabler Breite - - Show item checkbox - Element-Checkbox anzeigen - - - + Hide extra column Zusätzliche Spalte verbergen - + Hide scroll bar Scrollleiste ausblenden - + Hide header Titel ausblenden - + IconSize Symbolgröße - + FontSize Schrifthöhe - + ItemSpacing Elementabstand - + Overlay Überlagerungsmodus - + Hide tab bar Registerkarten-Leiste ausblenden - + Hide property view scroll bar Eigenschaften-Bildlaufleiste ausblenden - + Auto hide in non 3D view Automatisch verbergen in Nicht-3D-Ansicht - + Auto mouse pass through Automatisches Weitergeben der Maus - + Auto mouse wheel pass through Automatisches Weitergeben des Mausrads - + Delay mouse wheel pass through (ms) Verzögert Mausrad Weitergabe (ms) - + Alpha test radius Durchsicht-Testradius - + Check Navigation Cube Navigationswürfel anzeigen - + Hint trigger size Hinweis Triggergröße - + Hint width Hinweisbreite - + Left panel hint offset Hinweis-Versatz des linkes Paneels - + Left panel hint length Hinweis-Länge des linkes Paneels - + Right panel hint offset Hinweis-Versatz des rechten Paneels - + Right panel hint length Hinweis-Länge des rechten Paneels - + Top panel hint offset Hinweis-Versatz des oberen Paneels - + Top panel hint length Hinweis-Länge des oberen Paneels - + Bottom panel hint offset Hinweis-Versatz des unteren Paneels - + Bottom panel hint length Hinweis-Länge des unteren Paneels - + Hint show tab bar Hinweis Tab Leiste anzeigen - + Hint delay (ms) Hinweis-Verzögerung (ms) - + Splitter auto hide delay (ms) Verzögerung beim automatischen Ausblenden des Teilers (ms) - + Activate on hover Beim Darüberschweben aktivieren - + Layout delay (ms) Layoutverzögerung (ms) - + Animation duration (ms) Dauer der Animation (ms) - + Animation curve type Animations-Kurven-Typ Active object - Active object + Aktives Objekt @@ -10040,8 +10055,8 @@ the current copy will be lost. Neues Dokument erstellen - + Unnamed Unbenannt @@ -12350,12 +12365,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Beweglicher Navigationswürfel - + Drag and place NaviCube Navigationswürfel ziehen und platzieren @@ -12363,32 +12378,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT VORNE - + TOP OBEN - + RIGHT RECHTS - + REAR HINTEN - + BOTTOM UNTEN - + LEFT LINKS @@ -12630,7 +12645,7 @@ after FreeCAD launches Default unit system: - Default unit system: + Standard-Einheitensystem: @@ -12815,7 +12830,7 @@ display the splash screen Type - Typ + Art @@ -12873,47 +12888,47 @@ display the splash screen Benutzerdefiniert (%1px) - + Combo View Combo-Ansicht - + TreeView and PropertyView Baumansicht und Eigenschafteneditor - + Preference Pack Name Einstellunspaketname - + Tags Tags - + Apply Übernehmen - + Apply the %1 preference pack Anwenden des %1-Einstellungspakets - + Choose a FreeCAD config file to import Wähle eine FreeCAD-Konfigurationsdatei zum Import aus - + File exists Datei bereits vorhanden - + A preference pack with that name already exists. Overwrite? Ein Einstellungspaket mit diesem Namen existiert bereits. Möchten Sie es überschreiben? @@ -13633,7 +13648,7 @@ der Region nicht transparent sind. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Zeigt die Eigenschaften-Ansicht, welche die Eigenschaften des ausgewählten Objekts zeigt. diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index 6ca92b6350..73a68a3fea 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -117,7 +117,7 @@ Επεξεργασία - + Import Εισάγετε @@ -188,8 +188,8 @@ Τοποθέτηση - + Transform Μετατόπιση @@ -421,42 +421,42 @@ EditMode - + Default Προεπιλεγμένο - + The object will be edited using the mode defined internally to be the most appropriate for the object type Το αντικείμενο θα επεξεργαστεί χρησιμοποιώντας τη λειτουργία που έχει οριστεί εσωτερικά ώστε να είναι η καταλληλότερη για τον τύπο αντικειμένου - + Transform Μετατόπιση - + The object will have its placement editable with the Std TransformManip command Η τοποθέτησή του θα είναι επεξεργάσιμη με την εντολή Std TransformManip - + Cutting Περικοπή - + This edit mode is implemented as available but currently does not seem to be used by any object Αυτή η λειτουργία επεξεργασίας 'είναι διαθέσιμη, αλλά προς το παρόν δεν φαίνεται να χρησιμοποιείται από κανένα αντικείμενο - + Color Χρώμα - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Ρυθμίσεις κάμερας - + Orientation Προσανατολισμός - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Τωρινή προβολή @@ -2459,72 +2459,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Εκκαθάριση των ρυθμίσεων χρήστη - + Do you want to clear all your user settings? Θέλετε να εκκαθαρίσετε όλες σας τις ρυθμίσεις χρήστη; - + If you agree all your settings will be cleared. Αν συμφωνήσετε θα εκκαθαριστούν όλες οι ρυθμίσεις σας. - + Wrong parameter Εσφαλμένη παράμετρος - + Restart required Απαιτείται επανεκκίνηση - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2860,34 +2860,34 @@ in the corner -- in % of height/width of viewport Μέγεθος αναπαράστασης του συστήματος συντεταγμένων στη γωνία -- σε % του ύψους/πλάτους της προβολής - + Axis cross will be shown by default at file opening or creation Ο σταυρός αξόνων θα εμφανίζεται κατά το άνοιγμα ή τη δημιουργία ενός αρχείου - + Show axis cross by default Προεπιλογή εμφάνιση σταυρού αξόνων - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Ο χρόνος που απαιτείται για την τελευταία λειτουργία και ο προκύπτων ρυθμός καρέ θα εμφανίζονται στην κάτω αριστερή γωνία στα ανοιχτά αρχεία - + Show counter of frames per second Εμφάνιση μετρητή των καρέ ανά δευτερόλεπτο - + Rendering Απεικόνιση - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2896,22 +2896,22 @@ Changing this option requires a restart of the application. Η αλλαγή αυτής της επιλογής απαιτεί επανεκκίνηση της εφαρμογής. - + Use software OpenGL Χρήση λογισμικού OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Use OpenGL VBO (Vertex Buffer Object) - + Render cache Render cache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Αυτόματο - + Distributed Κατανομή - + Centralized Συγκέντρωση - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Κανένα - + Line Smoothing Εξομάλυνση Γραμμής - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Διαφανή αντικείμενα: - + Render types of transparent objects Render types of transparent objects - + One pass One pass - + Backface pass Backface pass - + Marker size: Μέγεθος του δείκτη: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Eye to eye distance for stereo modes - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3044,48 +3054,48 @@ bounding box size of the 3D object that is currently displayed. Η καθορισμένη τιμή είναι ένας παράγοντας που θα πολλαπλασιαστεί με το μέγεθος του πλαισίου οριοθέτησης του τρισδιάστατου αντικειμένου που εμφανίζεται αυτήν τη στιγμή. - + Backlight is enabled with the defined color Backlight is enabled with the defined color - - + + Backlight color Backlight color - + Intensity Ένταση - + Intensity of the backlight Ένταση οπίσθιου φωτισμού - + Camera type Τύπος κάμερας - + Objects will appear in a perspective projection Objects will appear in a perspective projection - + Perspective renderin&g Προοπτική αποτύπωση - + Objects will be projected in orthographic projection Objects will be projected in orthographic projection - + Or&thographic rendering Ορθογραφική απο&τύπωση @@ -3097,57 +3107,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Ανοίξτε ένα νέο πρόγραμμα προβολής ή πραγματοποιήστε επανεκκίνηση %1 για να εφαρμόσετε τις αλλαγές anti-aliasing. @@ -4037,7 +4047,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Πλοήγηση @@ -4123,68 +4133,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Χρώμα - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Τρισδιάστατη Πλοήγηση - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Εμφάνιση των ρυθμίσεων του ποντικιού για κάθε επιλεγμένη ρύθμιση πλοήγησης. Επιλέξτε ένα σετ και στη συνέχεια πατήστε το κουμπί για να δείτε αυτές τις ρυθμίσεις. - + Mouse... Ποντίκι... - + Navigation settings set Οι ρυθμίσεις πλοήγησης ορίστηκαν - + Orbit style Τύπος μορφοποίησης τροχιάς - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4195,136 +4215,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Περιστρεφόμενη βάση - + Trackball Ιχνόσφαιρα - + Free Turntable Free Turntable - + Rotation mode Λειτουργία περιστροφής - + Rotations in 3D will use current cursor position as center for rotation Περιστροφή σε 3D θα χρησιμοποιήσει την τρέχουσα θέση του κέρσορα ως κέντρο για περιστροφή - + Window center Κεντράρισμα παραθύρου - + Drag at cursor Σύρετε τον κέρσορα - + Object center Κέντρο αντικειμένων - + Default camera orientation Προεπιλεγμένος προσανατολισμός κάμερας - + Default camera orientation when creating a new document or selecting the home view Προεπιλεγμένος προσανατολισμός κάμερας κατά τη δημιουργία ενός νέου εγγράφου ή την επιλογή της προβολής αρχικής οθόνης - + Camera zoom Μεγέθυνση κάμερας - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Ρυθμίζει το ζουμ της κάμερας για νέα έγγραφα. Η τιμή είναι η διάμετρος της σφαίρας που θα χωρέσει στην οθόνη. - + mm χιλιοστά - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Zoom operations will be performed at position of mouse pointer - + Zoom at cursor Εστίαση στον κέρσορα - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Πόσο θα μεγεθύνεται. Το βήμα ζουμ του '1' σημαίνει ένα συντελεστή 7,5 για κάθε βήμα ζουμ. - + Direction of zoom operations will be inverted Direction of zoom operations will be inverted - + Invert zoom Αντιστροφή εστίασης - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4333,57 +4353,57 @@ Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture Απενεργοποίηση της χειρονομίας πλαγιάσματος, από την οθόνη αφής - + Isometric Ισομετρική - + Dimetric Διμετρική - + Trimetric Τριμετρική - + Top Πάνω - + Front Εμπρόσθια - + Left Αριστερά - + Right Δεξιά - + Rear Οπίσθια - + Bottom Κάτω - + Custom Επιλογή @@ -5641,7 +5661,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Προβολή Ιδιοτήτων @@ -6107,15 +6127,15 @@ Do you want to save your changes? Μορφή PDF - + Graphviz format Graphviz format + - Export graph Εξαγωγή γραφικού @@ -6698,14 +6718,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Προβολή - - + + Data Δεδομένα @@ -7679,22 +7699,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Εξαγωγή σε PDF - + PDF file Αρχείο PDF - + Opening file failed Αποτυχία ανοίγματος αρχείου - + Can't open file '%1' for writing. Αδυναμία ανοίγματος αρχείου '%1' για εγγραφή. @@ -7954,45 +7974,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Άγνωστος τύπος αρχείου - - + + Cannot open unknown filetype: %1 Αδυναμία ανοίγματος του αγνώστου τύπου αρχείου: %1 - + Export failed Αποτυχία της εξαγωγής - + Cannot save to unknown filetype: %1 Αδυναμία αποθήκευσης στον άγνωστο τύπο αρχείου: %1 - + Workbench failure Αποτυχία πάγκου εργασίας - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8043,8 +8063,8 @@ Do you want to specify another directory? Πραγματοποιείται εξαγωγή αρχείου PDF... - + Unsaved document Μη αποθηκευμένο έγγραφο @@ -8615,7 +8635,7 @@ Please open a browser window and type in: http://localhost:%1. Αδυναμία εύρεσης του αρχείου %1 τόσο στο %2 όσο και στο %3 - + Navigation styles Τύποι μορφοποίησης πλοήγησης @@ -8913,8 +8933,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8930,192 +8950,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Προβολή δενδροδιαγράμματος - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10048,8 +10063,8 @@ the current copy will be lost. Δημιουργήστε ένα νέο κενό έγγραφο - + Unnamed Ανώνυμο @@ -12360,12 +12375,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12373,32 +12388,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12883,47 +12898,47 @@ display the splash screen Προσαρμοσμένο (%1px) - + Combo View Συνδυασμένη Προβολή - + TreeView and PropertyView TreeView and PropertyView - + Preference Pack Name Όνομα Πακέτου Προτίμησης - + Tags Ετικέτες - + Apply Εφαρμογή - + Apply the %1 preference pack Εφαρμογή του %1 πακέτου προτιμήσεων - + Choose a FreeCAD config file to import Επιλέξτε ένα αρχείο ρυθμίσεων FreeCAD για εισαγωγή - + File exists Το αρχείο υπάρχει - + A preference pack with that name already exists. Overwrite? Ένα πακέτο προτιμήσεων με αυτό το όνομα υπάρχει ήδη. Αντικατάσταση; diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index 2678c87fba..b476393518 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -117,7 +117,7 @@ Editar - + Import Importar @@ -188,8 +188,8 @@ Ubicación - + Transform Transformar @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Establecer color aleatorio @@ -421,42 +421,42 @@ EditMode - + Default Predeterminado - + The object will be edited using the mode defined internally to be the most appropriate for the object type El objeto será editado utilizando el modo definido internamente que es más apropiado para el tipo de objeto - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command El objeto tendrá su ubicación editable con el comando Std TransformManip - + Cutting Corte - + This edit mode is implemented as available but currently does not seem to be used by any object Este modo de edición está implementado como disponible pero actualmente no parece ser utilizado por ningún objeto - + Color Color - + The object will have the color of its individual faces editable with the Part FaceColors command El objeto tendrá el color de sus caras individuales editables con el comando Part FaceColors @@ -788,37 +788,37 @@ mientras hace un clic izquierdo o derecho y mueve el mouse hacia arriba o hacia Gui::Dialog::CameraDialog - + Camera settings Ajustes de cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -2458,72 +2458,72 @@ Especifique otro directorio, por favor. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Resetear página '%1'... - + Resets the user settings for the page '%1' Resetea la configuración de usuario para la página '%1' - + Reset group '%1'... Restablecer grupo '%1'... - + Resets the user settings for the group '%1' Restablece la configuración de usuario para el grupo '%1' - + Reset all... Restablecer todo... - + Resets the user settings entirely Restablece por completo la configuración de usuario - + Clear user settings Limpiar ajustes del usuario - + Do you want to clear all your user settings? ¿Desea borrar todas sus configuraciones de usuario? - + If you agree all your settings will be cleared. Si está de acuerdo, se borrarán todas sus configuraciones. - + Wrong parameter Parámetro incorrecto - + Restart required Es necesario reiniciar - + You must restart FreeCAD for changes to take effect. Debe reiniciar FreeCAD para que los cambios surtan efecto. - + Restart now Reiniciar ahora - + Restart later Reiniciar más adelante @@ -2859,34 +2859,34 @@ in the corner -- in % of height/width of viewport en la esquina -- en % de la altura/ancho de la vista - + Axis cross will be shown by default at file opening or creation La cruz de los ejes se mostrará por defecto al abrir o crear un archivo - + Show axis cross by default Mostrar la cruz de los ejes por defecto - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files El tiempo necesario para la última operación y la tasa de fotogramas resultante se mostrará en la esquina inferior izquierda en los archivos abiertos - + Show counter of frames per second Mostrar contador de fotogramas por segundo - + Rendering Renderizado - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. Cambiar esta opción requiere reiniciar la aplicación. - + Use software OpenGL Usar software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Usar OpenGL VBO (Vertex Buffer Objet) - + Render cache Caché de renderización - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2933,7 +2933,17 @@ que van desde anomías gráficas hasta errores de bloqueo de GPU. Recuerda repor esta configuración como activada al buscar soporte en los foros de FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2950,92 +2960,92 @@ sólo caché en el nodo raíz del gráfico de escenas. Esto ofrece la velocidad pero una respuesta más lenta a cualquier cambio de escena. - + Auto Automático - + Distributed Distribuido - + Centralized Centralizado - + Anti-Aliasing Suavizado de bordes - + What kind of multisample anti-aliasing is used Qué tipo de suavizado de bordes multimuestra se utiliza - + None Ninguno - + Line Smoothing Suavizado de Línea - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objetos transparentes: - + Render types of transparent objects Tipo de renderizado de objetos transparentes - + One pass Una pasada - + Backface pass Pasada por la cara posterior - + Marker size: Tamaño del marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Tamaño de los vértices en Sketcher, TechDraw y otros entornos de trabajo - + Eye to eye distance for stereo modes Distancia de ojo a ojo para modos estéreo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3044,48 +3054,48 @@ El valor especificado es un factor que se multiplicará con el tamaño del recua del objeto 3D que se muestra actualmente. - + Backlight is enabled with the defined color La retroiluminación se habilita con el color definido - - + + Backlight color Color de retroiluminación - + Intensity Intensidad - + Intensity of the backlight Intensidad de la retroiluminación - + Camera type Tipo de cámara - + Objects will appear in a perspective projection Los objetos aparecerán en una proyección perspectiva - + Perspective renderin&g Renderizado en perspectiva - + Objects will be projected in orthographic projection Los objetos se proyectarán en proyección ortogonal - + Or&thographic rendering Renderizado ortográfico @@ -3097,57 +3107,57 @@ del objeto 3D que se muestra actualmente. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Suavizado de bordes - + Open a new viewer or restart %1 to apply anti-aliasing changes. Abre un nuevo visor o reinicie %1 para aplicar los cambios de suavizado. @@ -4036,7 +4046,7 @@ También puede utilizar el formulario: John Doe <john@doe.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navegación @@ -4122,68 +4132,78 @@ También puede utilizar el formulario: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Color - + Base color for all elements Color base para todos los elementos - + Rotation center indicator Indicador centro de rotación - + Sphere size Tamaño de la esfera - + Color and transparency Color y transparencia - + The size of the rotation center indicator El tamaño del indicador del centro de rotación - + The color of the rotation center indicator El color del indicador del centro de rotación - + 3D Navigation Navegación 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Lista la configuración de botones del ratón para cada configuración de navegación elegida. Seleccione un conjunto y, a continuación, presione el botón para ver dichas configuraciones. - + Mouse... Mouse... - + Navigation settings set Configuración de navegación establecida - + Orbit style Estilo de órbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4194,193 +4214,193 @@ Turntable: la pieza se girará alrededor del eje Z (con ejes restringidos). Turntable libre: la pieza se girará alrededor del eje z. - + Turntable Mesa giratoria - + Trackball Trackball - + Free Turntable Turntable libre - + Rotation mode Modo de rotación - + Rotations in 3D will use current cursor position as center for rotation Las rotaciones en 3D usarán la posición actual del cursor como centro de rotación - + Window center Centro de la ventana - + Drag at cursor Arrastre el cursor - + Object center Centro del objeto - + Default camera orientation Orientación de cámara por defecto - + Default camera orientation when creating a new document or selecting the home view Orientación por defecto de la cámara al crear un nuevo documento o seleccionar la vista de inicio - + Camera zoom Zoom de cámara - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Establece el zoom de la cámara para nuevos documentos. El valor es el diámetro de la esfera que cabe en la pantalla. - + mm mm - + Animations Animaciones - + Enable spinning animations that are used in some navigation styles after dragging Habilita las animaciones giratorias que se utilizan en algunos estilos de navegación después de arrastrar - + Enable spinning animations Activar animaciones giratorias - + Duration of navigation animations that have a fixed duration Duración de animaciones de navegación que demoran un lapso fijo - + Animation duration Duración de la animación - + The duration of navigation animations in milliseconds Duración de las animaciones de navegación en milisegundos - + Zoom step Paso de zoom - + Zoom operations will be performed at position of mouse pointer Las operaciones de zoom se realizarán en la posición del puntero del ratón - + Zoom at cursor Zoom en el cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Cuánto zoom se aplicará. Paso de zoom de ´1´ significa un factor de 7.5 para cada paso de zoom. - + Direction of zoom operations will be inverted La dirección de las operaciones de zoom se invertirá - + Invert zoom Invertir zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. Impide que la vista se incline cuando se hace zoom. Afecta solo el estilo de navegación por gestos. La inclinación del ratón no está desactivada por esta configuración. - + Disable touchscreen tilt gesture Desactivar gesto de inclinación de la pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Superior - + Front Anterior - + Left Izquierda - + Right Derecha - + Rear Posterior - + Bottom Inferior - + Custom Personalizado @@ -5637,7 +5657,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Vista de Propiedad @@ -6102,15 +6122,15 @@ Desea guardar los cambios? Formato PDF - + Graphviz format Formato Graphviz + - Export graph Exportar gráfico @@ -6690,14 +6710,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Ver - - + + Data Datos @@ -7672,22 +7692,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar a PDF - + PDF file Archivo PDF - + Opening file failed No se pudo abrir el archivo - + Can't open file '%1' for writing. No se puede abrir el archivo '%1' para escritura. @@ -7947,45 +7967,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Tipo de archivo desconocido - - + + Cannot open unknown filetype: %1 No es posible abrir el tipo de archivo desconocido: %1 - + Export failed Exportación fallida - + Cannot save to unknown filetype: %1 No es posible guardar el tipo de archivo desconocido: %1 - + Workbench failure Fallo del entorno de trabajo - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Este sistema está ejecutando OpenGL %1.%2. FreeCAD requiere OpenGL 2.0 o superior. Por favor actualice su controlador gráfico y/o tarjeta de ser necesario. - + Invalid OpenGL Version Versión OpenGL inválida @@ -8036,8 +8056,8 @@ Do you want to specify another directory? Exportando a PDF... - + Unsaved document Documento sin guardar @@ -8605,7 +8625,7 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. No se pueden encontrar los archivos %1 ni %2 ni %3 - + Navigation styles Estilos de navegación @@ -8905,8 +8925,8 @@ la copia actual se perderá. Alternar superposición - + Toggle floating window Alternar ventana flotante @@ -8922,192 +8942,187 @@ la copia actual se perderá. Presionar ESC para ocultar pista - + UI Interfaz de usuario - + Tree view Vista de árbol - + Item background color Color de fondo del elemento - + Item background padding Relleno del fondo del elemento - + Resizable columns Columnas redimensionables - - Show item checkbox - Mostrar casilla de elementos - - - + Hide extra column Ocultar columna extra - + Hide scroll bar Ocultar barra de desplazamiento - + Hide header Ocultar cabecera - + IconSize Tamaño de iconos - + FontSize Tamaño de letra - + ItemSpacing - ItemSpacing + Espaciado de elementos - + Overlay Superposición - + Hide tab bar Ocultar barra de pestañas - + Hide property view scroll bar Ocultar barra de desplazamiento de vista de propiedades - + Auto hide in non 3D view Ocultar automáticamente en vista no 3D - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius - Alpha test radius + Radio de prueba alfa - + Check Navigation Cube - Check Navigation Cube + Comprobar cubo de navegación - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10040,8 +10055,8 @@ la copia actual se perderá. Crea un documento vacío nuevo - + Unnamed Sin nombre @@ -12130,7 +12145,7 @@ after FreeCAD launches Reverse direction - Invertir dirección + Dirección inversa @@ -12350,12 +12365,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Cubo de navegación movible - + Drag and place NaviCube Arrastrar y colocar NaviCube @@ -12363,32 +12378,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT ANTERIOR - + TOP SUPERIOR - + RIGHT DERECHA - + REAR POSTERIOR - + BOTTOM INFERIOR - + LEFT IZQUIERDA @@ -12630,7 +12645,7 @@ after FreeCAD launches Default unit system: - Default unit system: + Sistema de unidad por defecto: @@ -12874,47 +12889,47 @@ la pantalla de bienvenida Personalizado (%1px) - + Combo View Vista combinada - + TreeView and PropertyView Vista de árbol y vista de propiedades - + Preference Pack Name Nombre del paquete de preferencias - + Tags Etiquetas - + Apply Aplicar - + Apply the %1 preference pack Aplicar el %1 paquete de preferencias - + Choose a FreeCAD config file to import Elige un archivo de configuración de FreeCAD para importar - + File exists El archivo ya existe - + A preference pack with that name already exists. Overwrite? Ya existe un paquete de preferencias con ese nombre. ¿Sobrescribir? @@ -13564,7 +13579,7 @@ the region are non-opaque. Toggle overlay - Alternar superposición + Alternar capa @@ -13632,7 +13647,7 @@ the region are non-opaque. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Mostrar la vista de propiedad, que muestra las propiedades del objeto seleccionado. diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 5130c88557..f61e594cb5 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -117,7 +117,7 @@ Editar - + Import Importar @@ -188,8 +188,8 @@ Ubicación - + Transform Transformar @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Establecer color aleatorio @@ -421,42 +421,42 @@ EditMode - + Default Por defecto - + The object will be edited using the mode defined internally to be the most appropriate for the object type El objeto será editado utilizando el modo definido internamente que es más apropiado para el tipo de objeto - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command El objeto tendrá su ubicación editable con el comando Std TransformManip - + Cutting Corte - + This edit mode is implemented as available but currently does not seem to be used by any object Este modo de edición está implementado como disponible pero actualmente no parece ser utilizado por ningún objeto - + Color Color - + The object will have the color of its individual faces editable with the Part FaceColors command El objeto tendrá el color de sus caras individuales editables con el comando Part FaceColors @@ -788,37 +788,37 @@ mientras hace clic con el botón izquierdo o derecho y mueve el ratón hacia arr Gui::Dialog::CameraDialog - + Camera settings Ajustes de la cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -2458,72 +2458,72 @@ Especifique otro directorio, por favor. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Restablecer página '%1'... - + Resets the user settings for the page '%1' Restablece la configuración de usuario de la página «%1» - + Reset group '%1'... Restablecer grupo «%1»... - + Resets the user settings for the group '%1' Restablece la configuración de usuario del grupo «%1» - + Reset all... Restablecer todo... - + Resets the user settings entirely Restablece por completo la configuración de usuario - + Clear user settings Borrar ajustes del usuario - + Do you want to clear all your user settings? ¿Desea borrar todos los ajustes del usuario? - + If you agree all your settings will be cleared. Si acepta se borrarán todos los ajustes. - + Wrong parameter Parámetro incorrecto - + Restart required Es necesario reiniciar - + You must restart FreeCAD for changes to take effect. Debe reiniciar FreeCAD para que los cambios surtan efecto. - + Restart now Reiniciar ahora - + Restart later Reiniciar más adelante @@ -2860,35 +2860,35 @@ in the corner -- in % of height/width of viewport en la esquina -- en % de la altura/ancho de la vista - + Axis cross will be shown by default at file opening or creation La cruz de los ejes se mostrará por defecto al abrir o crear un archivo - + Show axis cross by default Mostrar la cruz de los ejes por defecto - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Tiempo necesario para la última operación y la tasa de fotogramas resultante se mostrará en la esquina inferior izquierda en los archivos abiertos - + Show counter of frames per second Mostrar contador de cuadros por segundo - + Rendering Renderizado - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. Cambiar esta opción requiere reiniciar la aplicación. - + Use software OpenGL Usar software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Usar OpenGL VBO (Vertex Buffer Object) - + Render cache Renderizar caché - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2935,7 +2935,17 @@ que van desde anomías gráficas hasta errores de bloqueo de GPU. Recuerda repor esta configuración como activada al buscar soporte en los foros de FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2952,92 +2962,92 @@ sólo caché en el nodo raíz del gráfico de escenas. Esto ofrece la velocidad pero una respuesta más lenta a cualquier cambio de escena. - + Auto Auto - + Distributed Distribuido - + Centralized Centralizado - + Anti-Aliasing Anti-alias - + What kind of multisample anti-aliasing is used Qué tipo de antialiasing multimuestra se utiliza - + None Ninguno - + Line Smoothing Suavizado de líneas - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objetos transparentes: - + Render types of transparent objects Renderizar tipos de objetos transparentes - + One pass Una pasada - + Backface pass Pasada de cara posterior - + Marker size: Tamaño del marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Tamaño de los vértices en Sketcher, TechDraw y otros entornos de trabajo - + Eye to eye distance for stereo modes Distancia de ojo a ojo para modos estéreo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3046,48 +3056,48 @@ El valor especificado es un factor que se multiplicará con el tamaño del recua del objeto 3D que se muestra actualmente. - + Backlight is enabled with the defined color La retroiluminación está habilitada con el color definido - - + + Backlight color Luz de fondo - + Intensity Intensidad - + Intensity of the backlight Intensidad de la luz de fondo - + Camera type Tipo de cámara - + Objects will appear in a perspective projection Los objetos aparecerán en una proyección perspectiva - + Perspective renderin&g Representación en perspectiva - + Objects will be projected in orthographic projection Los objetos se proyectarán en proyección ortogonal - + Or&thographic rendering Representación or&togonal @@ -3099,57 +3109,57 @@ del objeto 3D que se muestra actualmente. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Suavizado de bordes - + Open a new viewer or restart %1 to apply anti-aliasing changes. Abre un nuevo visor o reinicie %1 para aplicar los cambios de suavizado. @@ -4039,7 +4049,7 @@ También puede utilizar el formulario: John Doe <john@doe.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navegación @@ -4125,68 +4135,78 @@ También puede utilizar el formulario: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Color - + Base color for all elements Color base para todos los elementos - + Rotation center indicator Indicador centro de rotación - + Sphere size Tamaño de la esfera - + Color and transparency Color y transparencia - + The size of the rotation center indicator El tamaño del indicador del centro de rotación - + The color of the rotation center indicator El color del indicador del centro de rotación - + 3D Navigation Navegación 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Lista la configuración de botones del ratón para cada configuración de navegación elegida. Seleccione un conjunto y, a continuación, presione el botón para ver dichas configuraciones. - + Mouse... Ratón... - + Navigation settings set Configuración de navegación - + Orbit style Estilo órbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4197,193 +4217,193 @@ Turntable: la pieza se girará alrededor del eje Z (con ejes restringidos). Turntable libre: la pieza se girará alrededor del eje z. - + Turntable Mesa giratoria - + Trackball Trackball - + Free Turntable Turntable libre - + Rotation mode Modo de rotación - + Rotations in 3D will use current cursor position as center for rotation Las rotaciones en 3D usarán la posición actual del cursor como centro de rotación - + Window center Centro de la ventana - + Drag at cursor Arrastra el cursor - + Object center Centro del objeto - + Default camera orientation Orientación de cámara por defecto - + Default camera orientation when creating a new document or selecting the home view Orientación de cámara por defecto al crear un nuevo documento o seleccionar la vista de inicio - + Camera zoom Zoom de cámara - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Establece el zoom de la cámara para nuevos documentos. El valor es el diámetro de la esfera que cabe en la pantalla. - + mm mm - + Animations Animaciones - + Enable spinning animations that are used in some navigation styles after dragging Habilitar animaciones giratorias que se utilizan en algunos estilos de navegación después de arrastrar - + Enable spinning animations Activar animaciones giratorias - + Duration of navigation animations that have a fixed duration Duración de animaciones de navegación que demoran un lapso fijo - + Animation duration Duración de animación - + The duration of navigation animations in milliseconds La duración de las animaciones de navegación en milisegundos - + Zoom step Paso de zum - + Zoom operations will be performed at position of mouse pointer Las operaciones de zoom se realizarán en la posición del puntero del ratón - + Zoom at cursor Zoom en cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Cuánto se ampliará. El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento. - + Direction of zoom operations will be inverted La dirección de las operaciones de zoom se invertirá - + Invert zoom Invertir zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. Impide que la vista se incline cuando se hace zoom. Afecta solo el estilo de navegación por gestos. La inclinación del ratón no está desactivada por esta configuración. - + Disable touchscreen tilt gesture Desactivar el gesto de inclinación de la pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Planta - + Front Alzado - + Left Izquierda - + Right Derecha - + Rear Posterior - + Bottom Inferior - + Custom Personalizado @@ -5640,7 +5660,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Vista de propiedades @@ -6105,15 +6125,15 @@ Desea guardar los cambios? Formato PDF - + Graphviz format Formato Graphviz + - Export graph Exportar gráfico @@ -6693,14 +6713,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Vista - - + + Data Datos @@ -7675,22 +7695,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar en PDF - + PDF file Archivo PDF - + Opening file failed No se pudo abrir el archivo - + Can't open file '%1' for writing. No se puede abrir el archivo '%1' para escritura. @@ -7950,45 +7970,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Tipo de archivo desconocido - - + + Cannot open unknown filetype: %1 No es posible abrir el tipo de archivo desconocido: %1 - + Export failed Exportación fallida - + Cannot save to unknown filetype: %1 No es posible guardar el tipo de archivo desconocido: %1 - + Workbench failure Fallo del entorno de trabajo - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Este sistema está ejecutando OpenGL %1.%2. FreeCAD requiere OpenGL 2.0 o superior. Por favor actualice su controlador gráfico y/o tarjeta de ser necesario. - + Invalid OpenGL Version Versión OpenGL inválida @@ -8039,8 +8059,8 @@ Do you want to specify another directory? Exportando a PDF... - + Unsaved document Documento sin guardar @@ -8608,7 +8628,7 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. No se pueden encontrar los archivos %1 ni %2 ni %3 - + Navigation styles Estilos de navegación @@ -8908,8 +8928,8 @@ la copia actual se perderá. Alternar superposición - + Toggle floating window Alternar ventana flotante @@ -8925,192 +8945,187 @@ la copia actual se perderá. Presiona ESC para ocultar pista - + UI IU - + Tree view Vista en árbol - + Item background color Color de fondo del elemento - + Item background padding - Item background padding + Relleno de fondo del elemento - + Resizable columns Columnas redimensionables - - Show item checkbox - Show item checkbox - - - + Hide extra column Ocultar columna adicional - + Hide scroll bar Ocultar barra de desplazamiento - + Hide header Ocultar cabecera - + IconSize Tamaño de iconos - + FontSize Tamaño de letra - + ItemSpacing - ItemSpacing + Espaciado de elementos - + Overlay Superposición - + Hide tab bar Ocultar barra de pestañas - + Hide property view scroll bar Ocultar barra de desplazamiento de vista de propiedades - + Auto hide in non 3D view Ocultar automáticamente en vista no 3D - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius - Alpha test radius + Radio de prueba alfa - + Check Navigation Cube - Check Navigation Cube + Comprobar cubo de navegación - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10026,7 +10041,7 @@ la copia actual se perderá. Cannot merge document with itself. - Cannot merge document with itself. + No se puede combinar el documento consigo mismo. @@ -10043,8 +10058,8 @@ la copia actual se perderá. Crea un documento vacío nuevo - + Unnamed Sin nombre @@ -12354,12 +12369,12 @@ después de que FreeCAD inicie NaviCubeDraggableCmd - + Movable navigation cube Cubo de navegación movible - + Drag and place NaviCube Arrastrar y colocar NaviCube @@ -12367,32 +12382,32 @@ después de que FreeCAD inicie NaviCubeSettings - + FRONT FRONTAL - + TOP ARRIBA - + RIGHT DERECHA - + REAR ATRAS - + BOTTOM ABAJO - + LEFT IZQUIERDA @@ -12879,47 +12894,47 @@ la pantalla de bienvenida Personalizado (%1px) - + Combo View Vista combinada - + TreeView and PropertyView Vista del Árbol y Vista de Propiedades - + Preference Pack Name Nombre del paquete de preferencias - + Tags Etiquetas - + Apply Aplicar - + Apply the %1 preference pack Aplicar el paquete de preferencias %1 - + Choose a FreeCAD config file to import Elija un archivo de configuración de FreeCAD para importar - + File exists El archivo ya existe - + A preference pack with that name already exists. Overwrite? Ya existe un paquete de preferencias con ese nombre. ¿Sobrescribir? diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 63ced5715d..a473281ea5 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -117,7 +117,7 @@ Editatu - + Import Inportatu @@ -188,8 +188,8 @@ Kokapena - + Transform Transformatu @@ -421,42 +421,42 @@ EditMode - + Default Lehenetsia - + The object will be edited using the mode defined internally to be the most appropriate for the object type Objektua barnean definitutako modua erabiliz editatuko da, objektu mota egokiena izan dadin - + Transform Transformatu - + The object will have its placement editable with the Std TransformManip command Objektuaren kokapena editatu ahal izango da Std TransformManip komandoaren bidez - + Cutting Moztea - + This edit mode is implemented as available but currently does not seem to be used by any object Edizio modua erabilgarri gisa inplementatu da, baina badirudi momentuan ez dagoela objekturik hura erabiltzen - + Color Kolorea - + The object will have the color of its individual faces editable with the Part FaceColors command Objektuaren banakako aurpegien kolorea editatu ahal izango da piezen FaceColors komandoarekin @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameraren ezarpenak - + Orientation Orientazioa - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Uneko bista @@ -2455,72 +2455,72 @@ Zehaztu beste direktorio, mesedez. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Berrezarri '%1' orrialdea... - + Resets the user settings for the page '%1' Erabiltzaile-ezarpenak berrezartzen ditu '%1' orrialderako - + Reset group '%1'... Berrezarri '%1' taldea... - + Resets the user settings for the group '%1' Erabiltzaile-ezarpenak berrezartzen ditu '%1' talderako - + Reset all... Berrezarri dena... - + Resets the user settings entirely Erabiltzaile-ezarpen guztiak berrezartzen ditu - + Clear user settings Garbitu erabiltzailearen ezarpenak - + Do you want to clear all your user settings? Zure erabiltzailearen ezarpen guztiak garbitu nahi dituzu? - + If you agree all your settings will be cleared. Onartzen baduzu, zure ezarpen guztiak garbituko dira. - + Wrong parameter Parametro okerra - + Restart required Berrabiarazi egin behar da - + You must restart FreeCAD for changes to take effect. FreeCAD berrabiarazi behar da aldaketak indarrean sartu daitezen. - + Restart now Berrabiarazi orain - + Restart later Berrabiarazi geroago @@ -2857,36 +2857,36 @@ in the corner -- in % of height/width of viewport izkinan -- leihatilaren altuera/zabaleraren ehunekoetan - + Axis cross will be shown by default at file opening or creation Ardatz-gurutzeak modu lehenetsian erakutsiko dira fitxategia irekitzean edo sortzean - + Show axis cross by default Erakutsi ardatz-gurutzea modu lehenetsian - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Azken eragiketarako behar izan den denbora eta sortutako fotograma-abiadura irekitako fitxategien beheko ezkerreko izkinan erakutsiko dira - + Show counter of frames per second Erakutsi fotogramak segundoko kontagailua - + Rendering Errendatzea - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. Aukera hau aldatzeko, aplikazioa berrabiarazi behar da. - + Use software OpenGL Erabili softwareko OpenGLa - + Use OpenGL VBO (Vertex Buffer Object) Erabili OpenGL VBO (Vertex Buffer Object) - + Render cache Errendatze-cachea - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ Gogoan izan ezarpen hori gaituta daukazula FreeCAD foroetan laguntza eske ari bazara. - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ eta sartu cachean eszena-grafoaren erro-nodoa soilik. Horrek errendatze-abiadura azkarrena eskaintzen du, baina erantzun motelagoa eszena-aldaketetan. - + Auto Automatikoa - + Distributed Banatua - + Centralized Zentralizatua - + Anti-Aliasing Antialiasing-a - + What kind of multisample anti-aliasing is used Zein motatako lagin anitzeko antialiasing-a ari den erabiltzen - + None Bat ere ez - + Line Smoothing Lerroaren leuntzea - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objektu gardenak: - + Render types of transparent objects Objektu gardenen errendatze motak - + One pass Pasaldi bat - + Backface pass Atzeko aurpegiko pasaldia - + Marker size: Markatzaile-tamaina: - + Size of vertices in the Sketcher, TechDraw and other workbenches Erpinen tamaina Sketcher, TechDraw eta beste lan-mahaietan - + Eye to eye distance for stereo modes Begien arteko distantzia modu estereoetarako - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ Zehaztutako balioa unean bistaratzen ari den 3D objektuaren muga-koadroaren tamainarekin biderkatuko den faktore bat da. - + Backlight is enabled with the defined color Atzeko argia definitutako kolorearekin gaituta dago - - + + Backlight color Atzeko argiaren kolorea - + Intensity Intentsitatea - + Intensity of the backlight Atzeko argiaren intentsitatea - + Camera type Kamera mota - + Objects will appear in a perspective projection Objektuak perspektibako proiekzio baten agertuko dira - + Perspective renderin&g &Perspektiba errendatzea - + Objects will be projected in orthographic projection Objektuak proiekzio ortografikoarekin proiektatuko dira - + Or&thographic rendering Errendatze or&tografikoa @@ -3098,57 +3108,57 @@ muga-koadroaren tamainarekin biderkatuko den faktore bat da. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Antialiasing-a - + Open a new viewer or restart %1 to apply anti-aliasing changes. Ireki ikustaile berri bat edo berrabiarazi %1 antialiasing-aldaketak aplikatzeko. @@ -4040,7 +4050,7 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Nabigazioa @@ -4126,68 +4136,78 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Kolorea - + Base color for all elements Elementu guztietarako oinarri-kolorea - + Rotation center indicator Biraketa-zentroaren adierazlea - + Sphere size Esfera-tamaina - + Color and transparency Kolorea eta gardentasuna - + The size of the rotation center indicator Biraketa-zentroaren adierazlearen tamaina - + The color of the rotation center indicator Biraketa-zentroaren adierazlearen kolorea - + 3D Navigation 3D nabigazioa - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Zerrendatu saguaren botoien konfigurazioak hautatutako nabigazio-ezarpen bakoitzerako. Hautatu multzo bat eta sakatu botoia konfigurazioak ikusteko. - + Mouse... Sagua... - + Navigation settings set Nabigazio-ezarpenen multzoa - + Orbit style Orbita-estiloa - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4199,136 +4219,136 @@ Tornu askea: Pieza Z ardatzaren inguruan biratuko da. - + Turntable Tornua - + Trackball Trackball - + Free Turntable Tornu librea - + Rotation mode Biraketa modua - + Rotations in 3D will use current cursor position as center for rotation 3D moduko biraketek kurtsorearen uneko posizioa erabiliko dute biraketarako erdigune gisa - + Window center Leihoaren zentroa - + Drag at cursor Arrastatu kurtsorera - + Object center Objektuaren zentroa - + Default camera orientation Kameraren orientazio lehenetsia - + Default camera orientation when creating a new document or selecting the home view Kameraren orientazio lehenetsia dokumentu bat sortzean edo bista nagusia hautatzean - + Camera zoom Kamera-zooma - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Kameraren zooma ezartzen du dokumentu berrietarako. Balioa da pantailari doituko zaion esferaren diametroa. - + mm mm - + Animations Animazioak - + Enable spinning animations that are used in some navigation styles after dragging Gaitu zenbait nabigazio-estilotan arrastatu ondoren erabiltzen diren biratze-animazioak - + Enable spinning animations Gaitu biratze-animazioak - + Duration of navigation animations that have a fixed duration Iraupen finkoa duten nabigazio-animazioen iraupena - + Animation duration Animazio-iraupena - + The duration of navigation animations in milliseconds Nabigazio-animazioen iraupena milisegundotan - + Zoom step Zoom-urratsa - + Zoom operations will be performed at position of mouse pointer Zoom-eragiketak saguaren erakuslearen posizioan gauzatuko dira - + Zoom at cursor Zooma kurtsorean - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Zenbateko zooma egingo den. '1' mailako zoomak 7,5eko faktorea da zoom-maila bakoitzerako. - + Direction of zoom operations will be inverted Zoom-eragiketen norabidea alderantzikatu egingo da. - + Invert zoom Alderantzikatu zooma - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4337,57 +4357,57 @@ Keinu-nabigazioaren estiloari soilik eragiten dio. Ezarpen honek ez du desgaitzen sagu bidezko inklinazioa. - + Disable touchscreen tilt gesture Desgaitu ukimen-pantailaren inklinazio keinua - + Isometric Isometrikoa - + Dimetric Dimetrikoa - + Trimetric Trimetrikoa - + Top Goikoa - + Front Aurrekoa - + Left Ezkerrekoa - + Right Eskuinekoa - + Rear Atzekoa - + Bottom Azpikoa - + Custom Pertsonalizatua @@ -5646,7 +5666,7 @@ hautatutako objektuekin Gui::DockWnd::PropertyDockView - + Property View Propietate-bista @@ -6111,15 +6131,15 @@ Aldaketak gorde nahi dituzu? PDF formatua - + Graphviz format Graphviz formatua + - Export graph Esportatu grafikoa @@ -6702,14 +6722,14 @@ Nola jarraitu nahi duzu? Gui::PropertyView - - + + View Bista - - + + Data Datuak @@ -7684,22 +7704,22 @@ Beste direktorio bat aukeratu nahi al duzu? Gui::View3DInventor - + Export PDF Esportatu PDFa - + PDF file PDF fitxategia - + Opening file failed Fitxategia irekitzeak huts egin du - + Can't open file '%1' for writing. Ezin da '%1' fitxategia ireki hura idazteko. @@ -7959,45 +7979,45 @@ Beste direktorio bat aukeratu nahi al duzu? Python - - - + + + Unknown filetype Fitxategi mota ezezaguna - - + + Cannot open unknown filetype: %1 Ezin da ireki fitxategi mota ezezaguna: %1 - + Export failed Esportazioak huts egin du - + Cannot save to unknown filetype: %1 Ezin da gorde fitxategi mota ezezagunera: %1 - + Workbench failure Lan-mahaiaren hutsegitea - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Sistema honek OpenGL %1.%2 bertsioa du. FreeCADek OpenGL 2.0 edo berriagoa behar du. Eguneratu zure txartel grafikoa edo bere kontrolagailua. - + Invalid OpenGL Version OpenGL bertsio baliogabea @@ -8048,8 +8068,8 @@ Beste direktorio bat aukeratu nahi al duzu? PDFa esportatzen... - + Unsaved document Gorde gabeko dokumentua @@ -8619,7 +8639,7 @@ Mesedez, ireki nabigatzaile-leiho bat eta idatzi: http://localhost:%1.Ez da %1 fitxategia aurkitu ez %2 ez %3 tokietan - + Navigation styles Nabigazio-estiloak @@ -8918,8 +8938,8 @@ egindako aldaketak galdu egingo direla. Txandakatu gainjartzea - + Toggle floating window Txandakatu leiho flotagarria @@ -8935,192 +8955,187 @@ egindako aldaketak galdu egingo direla. Sakatu ESC oharra ezkutatzeko - + UI EIa - + Tree view Zuhaitz-bista - + Item background color Elementuaren atzeko planoaren kolorea - + Item background padding Elementuaren atzeko planoaren betegarria - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Ezkutatu korritze-barra - + Hide header Ezkutatu goiburua - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Aktibatu gainetik igarotzean - + Layout delay (ms) Diseinuaren atzerapena (ms) - + Animation duration (ms) Animazio-iraupena (ms) - + Animation curve type Animazioaren kurba mota @@ -10053,8 +10068,8 @@ egindako aldaketak galdu egingo direla. Sortu dokumentu huts berri bat - + Unnamed Izenik gabea @@ -12364,12 +12379,12 @@ FreeCAD abiarazi ondoren NaviCubeDraggableCmd - + Movable navigation cube Nabigazio-kubo mugikorra - + Drag and place NaviCube Arrastatu eta kokatu nabigazio-kuboa @@ -12377,32 +12392,32 @@ FreeCAD abiarazi ondoren NaviCubeSettings - + FRONT AURRETIK - + TOP GOITIK - + RIGHT ESKUBITIK - + REAR ATZETIK - + BOTTOM BEHETIK - + LEFT EZKERRETIK @@ -12889,47 +12904,47 @@ abioko pantaila erakutsiko du. Pertsonalizatua (%1px) - + Combo View Bista konbinatua - + TreeView and PropertyView Zuhaitz-bista eta propietate-bista - + Preference Pack Name Hobespen-paketearen izena - + Tags Etiketak - + Apply Aplikatu - + Apply the %1 preference pack Aplikatu %1 hobespen-paketea - + Choose a FreeCAD config file to import Aukeratu inportatuko den FreeCAD konfigurazio-fitxategia - + File exists Fitxategi hori badago - + A preference pack with that name already exists. Overwrite? Badago izen hori duen hobespen-pakete bat. Gainidatzi? diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index b848c70f81..95f0243bc2 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -117,7 +117,7 @@ Muokkaa - + Import Tuonti @@ -188,8 +188,8 @@ Sijainti - + Transform Muunna @@ -421,42 +421,42 @@ EditMode - + Default Oletus - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Muunna - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Leikkuu - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Väri - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kameran asetukset - + Orientation Suunta - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Nykyinen Näkymä @@ -2459,72 +2459,72 @@ Määritä toinen hakemisto, ole hyvä. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Poista käyttäjäasetukset - + Do you want to clear all your user settings? Haluatko tyhjentää kaikki käyttäjän asetukset? - + If you agree all your settings will be cleared. Jos hyväksyt, kaikki asetuksesi poistetaan. - + Wrong parameter Väärä parametri - + Restart required Uudelleenkäynnistys vaaditaan - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Käynnistä uudelleen nyt - + Restart later Käynnistä uudelleen myöhemmin @@ -2861,36 +2861,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Akselien ylitys näkyy oletusarvoisesti tiedoston avaamisessa tai luomisessa - + Show axis cross by default Näytä akselin ylitys oletuksena - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Viimeisimmälle toiminnalle tarvittava aika ja tuloksena saatava kehysnopeus näytetään vasemmassa alakulmassa avatuissa tiedostoissa - + Show counter of frames per second Näytä näytön päivitysnopeus - + Rendering Renderöinti - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2899,22 +2899,22 @@ Changing this option requires a restart of the application. Tämän vaihtoehdon muuttaminen vaatii sovelluksen uudelleenkäynnistyksen. - + Use software OpenGL Käytä ohjelmistopohjaista OpenGL:ää - + Use OpenGL VBO (Vertex Buffer Object) Käytä OpenGL VBO (Vertex Buffer Object) - + Render cache Renderöi välimuisti - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2937,7 +2937,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2954,92 +2964,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Automaattinen - + Distributed Jaettu - + Centralized Keskitetty - + Anti-Aliasing Reunanpehmennys - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Ei mitään - + Line Smoothing Rivin tasoitus - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Läpinäkyvät objektit: - + Render types of transparent objects Renderöinti tyypit läpinäkyville kohteille - + One pass Yksi kulku - + Backface pass Taustan läpikulku - + Marker size: Markerin koko: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Silmien välinen etäisyys stereotiloja varten - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3048,48 +3058,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color Taustavalo on käytössä määritetyllä värillä - - + + Backlight color Taustavalon väri - + Intensity Voimakkuus - + Intensity of the backlight Taustavalon voimakkuus - + Camera type Kameratyyppi - + Objects will appear in a perspective projection Objektit tulevat näkyviin perspektiivi projektiossa - + Perspective renderin&g Perspektiivinen renderöinti&g - + Objects will be projected in orthographic projection Objektit projisoidaan ortografinen projektioon - + Or&thographic rendering Ortografinen renderöinti @@ -3101,57 +3111,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Reunanpehmennys - + Open a new viewer or restart %1 to apply anti-aliasing changes. Avaa uusi katsoja tai käynnistä %1 uudelleen ottaaksesi käyttöön reunanpehmennys-muutoksia. @@ -4041,7 +4051,7 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Siirtyminen @@ -4127,68 +4137,78 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Väri - + Base color for all elements Base color for all elements - + Rotation center indicator Käännön keskiön ilmaisin - + Sphere size Pallon koko - + Color and transparency Väri ja läpinäkyvyys - + The size of the rotation center indicator Käännön keskiön osoittimen koko - + The color of the rotation center indicator Käännön keskiön osoittimen väri - + 3D Navigation 3D-navigointi - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Listaa hiiren painike asetukset kunkin valitun navigointiasetuksen osalta. Valitse sarja ja paina sitten painiketta nähdäksesi mainitut asetukset. - + Mouse... Hiiri... - + Navigation settings set Navigoinnin asetukset - + Orbit style Kiertoradan tyyli - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4199,136 +4219,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Pyörähdyspöytä - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Kiertotila - + Rotations in 3D will use current cursor position as center for rotation Kiertäminen 3D: ssä käyttää nykyistä kursorin sijaintia pyörimisen keskipisteenä - + Window center Ikkunan keskipiste - + Drag at cursor Vedä kohdistimeen - + Object center Objektin keskipiste - + Default camera orientation Kameran oletussuunta - + Default camera orientation when creating a new document or selecting the home view Kameran oletussuunta luotaessa uutta asiakirjaa tai valitsemalla kotinäkymä - + Camera zoom Kameran zoomaus - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Asettaa kameran zoomaus uusille dokumenteille. Arvo on pallon halkaisija, joka mahtuu ruudulle. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animaation kesto - + The duration of navigation animations in milliseconds Navigoinnin animaatioiden kesto millisekunteina - + Zoom step Zoomauksen askel - + Zoom operations will be performed at position of mouse pointer Zoomaus toiminnot suoritetaan hiiren osoittimen kohdassa - + Zoom at cursor Suurenna osoittimen kohdalta - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted Suurennuksen suunta käännetään ylösalaisin - + Invert zoom Käännä zoom päinvastaiseksi - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4337,57 +4357,57 @@ Vaikuttaa vain ele navigointi tyyliin. Hiiren kallistaminen ei ole pois käytöstä tällä asetuksella. - + Disable touchscreen tilt gesture Poista kosketusnäytön kallistusele käytöstä - + Isometric Isometrinen - + Dimetric Dimetrinen - + Trimetric Trimetrinen - + Top Yläpuoli - + Front Etupuoli - + Left Vasen - + Right Oikea - + Rear Takana - + Bottom Pohja - + Custom Mukautettu @@ -5645,7 +5665,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Näytä ominaisuudet @@ -6109,15 +6129,15 @@ Do you want to save your changes? PDF-muoto - + Graphviz format Graphviz format + - Export graph Vie kaavio @@ -6699,14 +6719,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Näytä - - + + Data Tiedot @@ -7680,22 +7700,22 @@ Haluatko valita toisen hakemiston? Gui::View3DInventor - + Export PDF Vie PDF - + PDF file PDF-tiedosto - + Opening file failed Tiedoston avaaminen epäonnistui - + Can't open file '%1' for writing. Tiedostoon ”%1” ei voida tallentaa. @@ -7955,45 +7975,45 @@ Haluatko valita toisen hakemiston? Python - - - + + + Unknown filetype Tuntematon tiedostotyyppi - - + + Cannot open unknown filetype: %1 Ei voida avata tuntematonta tiedostotyyppiä:%1 - + Export failed Vienti epäonnistui - + Cannot save to unknown filetype: %1 Ei voi tallentaa tuntematonta tiedostotyyppiä:%1 - + Workbench failure Työpöydän häiriö - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8044,8 +8064,8 @@ Haluatko valita toisen hakemiston? Viedään PDF... - + Unsaved document Tallentamaton asiakirja @@ -8613,7 +8633,7 @@ Please open a browser window and type in: http://localhost:%1. Ei voida löytää tiedostoja %1, %2 ja %3 - + Navigation styles Navigointityylit @@ -8914,8 +8934,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8931,192 +8951,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Puunäkymä - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animaation kesto (ms) - + Animation curve type Animation curve type @@ -10049,8 +10064,8 @@ the current copy will be lost. Luo uusi tyhjä asiakirja - + Unnamed Nimetön @@ -12360,12 +12375,12 @@ FreeCAD käynnistyksen jälkeen NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12373,32 +12388,32 @@ FreeCAD käynnistyksen jälkeen NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12885,47 +12900,47 @@ väläysikkunan. Mukautettu (%1px) - + Combo View Yhdistelmänäkymä - + TreeView and PropertyView Puunäkymä ja ominaisuusnäkymä - + Preference Pack Name Asetuspaketin nimi - + Tags Tags - + Apply Käytä - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Valitse tuotava FreeCAD-asetustiedosto - + File exists Tiedosto on olemassa - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 82f8139895..55d1a53b17 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -117,7 +117,7 @@ Éditer - + Import Importer @@ -188,8 +188,8 @@ Position - + Transform Transformer @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Définir une couleur aléatoire @@ -421,42 +421,42 @@ EditMode - + Default - Par défaut + Défaut - + The object will be edited using the mode defined internally to be the most appropriate for the object type L’objet sera modifié à l’aide du mode défini de manière interne comme étant le plus approprié au type d’objet - + Transform Transformer - + The object will have its placement editable with the Std TransformManip command L’objet aura un positionnement modifiable à l’aide de la commande Transformer - + Cutting Couper - + This edit mode is implemented as available but currently does not seem to be used by any object Ce mode de modification est implémenté comme étant disponible, mais il ne semble pas être actuellement utilisé par un objet quelconque - + Color Colorier - + The object will have the color of its individual faces editable with the Part FaceColors command La couleur de chaque face de l’objet est modifiable à l’aide de la commande Part Définir les couleurs. @@ -597,7 +597,7 @@ Press middle mouse button - Appuyer sur la roulette de la souris + Appuyez sur la roulette de la souris @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Paramètres de la caméra - + Orientation Orientation - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vue actuelle @@ -1392,7 +1392,7 @@ same time. The one with the highest priority will be triggered. none - rien + aucun @@ -2453,72 +2453,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Réinitialiser la page "%1... - + Resets the user settings for the page '%1' Réinitialise les paramètres de l'utilisateur pour la page '%1' - + Reset group '%1'... Réinitialiser le groupe "%1... - + Resets the user settings for the group '%1' Réinitialise les paramètres de l'utilisateur pour le groupe "%1" - + Reset all... Tout réinitialiser... - + Resets the user settings entirely Réinitialise entièrement les paramètres de l'utilisateur - + Clear user settings Effacer les paramètres personnels - + Do you want to clear all your user settings? Voulez-vous effacer tous vos paramètres personnels ? - + If you agree all your settings will be cleared. Si vous acceptez, tous vos paramètres personnels seront effacés. - + Wrong parameter Paramètre erroné - + Restart required Redémarrage requis - + You must restart FreeCAD for changes to take effect. Vous devez redémarrer FreeCAD pour que les changements prennent effet. - + Restart now Redémarrer maintenant - + Restart later Redémarrer plus tard @@ -2583,7 +2583,7 @@ Specify another directory, please. Last &modification date: - Date &de dernière modification : + Date de la dernière &modification : @@ -2785,7 +2785,7 @@ Specify another directory, please. TextLabel - Étiquette de texte + TextLabel @@ -2854,35 +2854,35 @@ in the corner -- in % of height/width of viewport dans le coin -- en % de hauteur/largeur de la fenêtre d'affichage - + Axis cross will be shown by default at file opening or creation La croix des axes sera affichée par défaut lors de l'ouverture ou de la création du fichier - + Show axis cross by default Afficher la croix de l'axe par défaut - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Le temps nécessaire pour la dernière opération et la fréquence d'images seront affichés dans le coin inférieur gauche dans les fichiers ouverts - + Show counter of frames per second Afficher le compteur d'images par seconde - + Rendering Rendu - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2891,22 +2891,22 @@ Changing this option requires a restart of the application. La modification de cette option nécessite un redémarrage de l'application. - + Use software OpenGL Utiliser OpenGL par logiciel - + Use OpenGL VBO (Vertex Buffer Object) Utiliser OpenGL VBO (Vertex Buffer Object) - + Render cache Rendu accéléré - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2925,7 +2925,17 @@ peuvent être rendues directement par le GPU. Remarque : cette fonction peut parfois conduire à une foule de problèmes différents allant d'anomalies graphiques aux boggues de crash du GPU. Signaler que ce paramètre est activé lorsque vous demandez de l'aide sur le forum de FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2940,92 +2950,92 @@ Il y a 3 options disponibles pour y parvenir : 3) « Centralisé », désactiver manuellement le cache dans tous les nœuds de tous les fournisseurs de vues, et ne cacher qu’au niveau du nœud racine du graphe de la scène. Cette solution offre la vitesse de rendu la plus rapide, mais une réponse plus lente à tout changement de scène. - + Auto Auto - + Distributed Distribué - + Centralized Centralisé - + Anti-Aliasing Anticrénelage - + What kind of multisample anti-aliasing is used Quel type d'anticrénelage multi-échantillon est utilisé - + None Rien - + Line Smoothing Lissage de ligne - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: Objets transparents : - + Render types of transparent objects Type de rendu des objets transparents - + One pass Un seul passage - + Backface pass Passage pour les faces arrières - + Marker size: Taille des marqueurs : - + Size of vertices in the Sketcher, TechDraw and other workbenches Taille des sommets dans Sketcher, Techdraw et d'autres ateliers - + Eye to eye distance for stereo modes Distance entre les yeux pour les modes stéréo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3034,48 +3044,48 @@ La valeur spécifiée est un facteur qui sera multiplié avec la taille de la boîte englobante de l'objet 3D affichée. - + Backlight is enabled with the defined color Le rétroéclairage est activé avec la couleur définie. - - + + Backlight color Couleur du rétroéclairage - + Intensity Intensité - + Intensity of the backlight Intensité du rétroéclairage - + Camera type Type de caméra - + Objects will appear in a perspective projection Les objets apparaîtront dans une projection en perspective - + Perspective renderin&g Vue en &perspective - + Objects will be projected in orthographic projection Les objets seront projetés en projection orthographique - + Or&thographic rendering Vue or&thographique @@ -3087,57 +3097,57 @@ la taille de la boîte englobante de l'objet 3D affichée. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20 px - + 25px 25px - + 30px 30px - + Anti-aliasing Anticrénelage - + Open a new viewer or restart %1 to apply anti-aliasing changes. Ouvrir une nouvelle visionneuse ou redémarrer %1 pour appliquer les modifications d'anticrénelage. @@ -3471,8 +3481,8 @@ Cette fonctionnalité peut légèrement augmenter le temps de recalcul. If there is a recovery file available the application will automatically run a file recovery when it is started. - S'il y a un fichier de récupération disponible, l'application -exécutera automatiquement une récupération de fichier au démarrage. + S'il y a un fichier de récupération disponible, l'application exécutera +automatiquement une récupération du fichier au démarrage. @@ -3535,8 +3545,8 @@ Les tailles communes sont 128, 256 et 512 Backup files will get extension '.FCbak' and file names get date suffix according to the specified format - Les fichiers de sauvegarde recevront l'extension ".FCbak" et les noms de fichiers -auront le suffixe de date selon le format spécifié + Les fichiers de sauvegarde recevront l'extension ".FCbak". +Les noms des fichiers auront le suffixe de date selon le format spécifié. @@ -3546,7 +3556,7 @@ auront le suffixe de date selon le format spécifié Date format - Format de date + Format des dates @@ -3711,7 +3721,7 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> The format of the date to use. - Format de la date à utiliser. + Format des dates à utiliser. @@ -4028,7 +4038,7 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navigation @@ -4100,7 +4110,7 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Default - Défaut + Par défaut @@ -4114,68 +4124,78 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Couleur - + Base color for all elements Couleur de base pour tous les éléments - + Rotation center indicator Indicateur du centre de rotation - + Sphere size Taille de la sphère - + Color and transparency Couleurs et transparence - + The size of the rotation center indicator La taille de l'indicateur du centre de rotation - + The color of the rotation center indicator La couleur de l'indicateur du centre de rotation - + 3D Navigation Navigation 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Liste les configurations du bouton de la souris pour chaque paramètre de navigation choisi. Sélectionnez un réglage puis appuyez sur le bouton pour afficher ces configurations. - + Mouse... Souris... - + Navigation settings set Ensemble des réglages de navigation - + Orbit style Style d'orbite - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4186,136 +4206,136 @@ Vue en rotation : la pièce sera pivotée autour de l’axe z (avec des axes con Vue en rotation libre : la pièce sera pivotée autour de l’axe z. - + Turntable Vue en rotation - + Trackball Trackball - + Free Turntable Vue en rotation libre - + Rotation mode Mode de rotation - + Rotations in 3D will use current cursor position as center for rotation Les rotations en 3D utiliseront la position actuelle du curseur comme centre de rotation - + Window center Centre de la fenêtre - + Drag at cursor Positionner au curseur - + Object center Centre de l'objet - + Default camera orientation Orientation par défaut de la caméra - + Default camera orientation when creating a new document or selecting the home view Orientation par défaut de la caméra lors de la création d'un nouveau document ou de la sélection de la vue initiale - + Camera zoom Zoom de la caméra - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Définit le zoom de la caméra pour de nouveaux documents. La valeur est le diamètre de la sphère qui rentre à l'écran. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Activer les animations de rotation qui sont utilisées dans certains styles de navigation après un glisser-déposer. - + Enable spinning animations Activer les animations de rotation - + Duration of navigation animations that have a fixed duration Durée des animations de navigation qui ont une durée fixe - + Animation duration Durée de l'animation - + The duration of navigation animations in milliseconds La durée des animations de navigation est en millisecondes. - + Zoom step Pas du zoom - + Zoom operations will be performed at position of mouse pointer Les opérations de zoom seront effectuées à la position du pointeur de la souris - + Zoom at cursor Zoomer sur le curseur - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Facteur d'agrandissement. Un pas du zoom de "1" signifie un facteur de 7.5 pour chaque pas de zoom. - + Direction of zoom operations will be inverted Le sens du zoom sera inversé - + Invert zoom Inverser le zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4324,57 +4344,57 @@ N’affecte que le style de navigation Gesture. L’inclinaison à la souris n’est pas désactivée par ce réglage. - + Disable touchscreen tilt gesture Désactiver l’inclinaison par geste de l’écran tactile - + Isometric Isométrique - + Dimetric Dimétrique - + Trimetric Trimétrique - + Top Dessus - + Front Face - + Left Gauche - + Right Droit - + Rear Arrière - + Bottom Dessous - + Custom Personnaliser @@ -4637,7 +4657,7 @@ Une valeur plus grande facilite la sélection, mais peut rendre les petites fonc Background color for objects in tree view that are currently edited - Couleur de l'arrière-plan pour les objets de la vue en arborescence en cours d'édition + Couleur d'arrière-plan des objets de la vue en arborescence en cours d'édition @@ -5016,7 +5036,7 @@ La colonne "État" indique si le document a pu être récupéré. Add icon folder - Ajouter un dossier d'icône + Ajouter un dossier d'icônes @@ -5034,7 +5054,7 @@ La colonne "État" indique si le document a pu être récupéré. Removing a folder only takes effect after an application restart. - Retirer un dossier ne prend effet qu'après le redémarrage de l'application. + La suppression d'un dossier ne prendra effet qu'après le redémarrage de l'application. @@ -5633,7 +5653,7 @@ initialement sélectionnés avant d'ouvrir ce dialogue Gui::DockWnd::PropertyDockView - + Property View Affichage des propriétés @@ -6098,15 +6118,15 @@ Voulez enregistrer les modifications ? Format PDF - + Graphviz format Format Graphviz + - Export graph Exporter un graphique @@ -6134,7 +6154,7 @@ Voulez enregistrer les modifications ? Press middle mouse button - Appuyer sur la molette de la souris + Appuyer sur la roulette de la souris @@ -6686,14 +6706,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Vue - - + + Data Données @@ -6852,7 +6872,7 @@ Voulez vous quitter sans sauvegarder vos données? none - aucun + rien @@ -7046,7 +7066,7 @@ Do you want to specify another directory? TextLabel - TextLabel + Étiquette de texte @@ -7196,7 +7216,7 @@ Do you want to specify another directory? Press middle mouse button - Appuyez sur la roulette de la souris + Appuyer sur la molette de la souris @@ -7666,22 +7686,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporter en PDF - + PDF file Fichier PDF - + Opening file failed L'ouverture du fichier a échoué - + Can't open file '%1' for writing. Impossible d'ouvrir le fichier "%1" en écriture. @@ -7941,45 +7961,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Type de fichier inconnu - - + + Cannot open unknown filetype: %1 Impossible d'ouvrir un type de fichier inconnu : %1 - + Export failed Échec de l'exportation - + Cannot save to unknown filetype: %1 Impossible de sauvegarder ce type de fichier inconnu : %1 - + Workbench failure Atelier défaillant - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ce système utilise OpenGL %1.%2. FreeCAD nécessite OpenGL 2.0 ou supérieur. Veuillez mettre à jour votre pilote graphique et/ou votre carte si nécessaire. - + Invalid OpenGL Version Version d'OpenGL non valide @@ -8030,8 +8050,8 @@ Do you want to specify another directory? Exportation PDF ... - + Unsaved document Document non sauvegardé @@ -8599,7 +8619,7 @@ Veuillez ouvrir une fenêtre de navigateur et saisir : http://localhost:%1.Impossible de trouver le fichier %1 ni dans %2 ni dans %3 - + Navigation styles Styles de navigation @@ -8900,8 +8920,8 @@ apportée à la copie en cours sera perdue. Activer/désactiver la superposition - + Toggle floating window Activer/désactiver la fenêtre flottante @@ -8917,199 +8937,194 @@ apportée à la copie en cours sera perdue. Appuyez sur Echap pour masquer l'indice - + UI Interface utilisateur - + Tree view Vue en arborescence - + Item background color - Couleur d'Arrière-plan de l'Élément + Couleur d'arrière-plan des éléments - + Item background padding - Remplissage de l’arrière-plan de l’élément + Remplissage de l’arrière-plan des éléments - + Resizable columns Colonnes redimensionnables - - Show item checkbox - - - - + Hide extra column Masquer une colonne supplémentaire - + Hide scroll bar - + Masquer la barre de défilement - + Hide header Masquer l'en-tête - + IconSize Taille de l'icône - + FontSize Taille de la police - + ItemSpacing Espacement des éléments - + Overlay Superposition - + Hide tab bar - Masquer la barre d'onglets + Masquer la barre des onglets - + Hide property view scroll bar Masquer la barre de défilement de la vue des propriétés - + Auto hide in non 3D view Masquer automatiquement dans la vue non 3D - + Auto mouse pass through Passage automatique de la souris - + Auto mouse wheel pass through Passage automatique de la molette de la souris - + Delay mouse wheel pass through (ms) Délai de passage de la molette de la souris (ms) - + Alpha test radius Test alpha de rayon - + Check Navigation Cube - Vérifier le Cube de Navigation + Vérifier le cube de navigation - + Hint trigger size Taille de l'indice de déclenchement - + Hint width Largeur de l'indice - + Left panel hint offset Décalage de l'indice du panneau gauche - + Left panel hint length Longueur de l'indice du panneau gauche - + Right panel hint offset Décalage de l'indice du panneau droit - + Right panel hint length Longueur de l'indice du panneau droit - + Top panel hint offset Décalage de l'indice du panneau supérieur - + Top panel hint length Longueur de l'indice du panneau supérieur - + Bottom panel hint offset Décalage de l'indice du panneau inférieur - + Bottom panel hint length Longueur de l'indice du panneau inférieur - + Hint show tab bar Afficher la barre des onglets - + Hint delay (ms) Indice visuel (ms) - + Splitter auto hide delay (ms) Délai de masquage automatique du séparateur (ms) - + Activate on hover Activer le survol - + Layout delay (ms) Délai de la surimposition (ms) - + Animation duration (ms) Durée de l'animation (ms) - + Animation curve type Type de courbe d'animation Active object - Active object + L'objet actif @@ -9973,7 +9988,7 @@ Contrairement aux clones, les liens font directement référence à la forme d'o Measure distance - Mesurer une distance + Mesurer la distance @@ -9987,7 +10002,7 @@ Contrairement aux clones, les liens font directement référence à la forme d'o Measure distance - Mesurer la distance + Mesurer une distance @@ -10036,8 +10051,8 @@ Contrairement aux clones, les liens font directement référence à la forme d'o Créer un nouveau document vide - + Unnamed Sans nom @@ -11698,7 +11713,7 @@ Voulez-vous tout de même continuer ? Tree view item background padding. - Remplissage de l’arrière-plan de l’élément dans la vue en arborescence. + Remplissage de l’arrière-plan des éléments dans la vue en arborescence. @@ -12052,7 +12067,7 @@ after FreeCAD launches If checked, application will remember which workbench is active for each tab of the viewport - Si coché, l'application se rappellera quel atelier est actif pour chaque onglet de la fenêtre d'affichage + Si cette option est cochée, l'application se rappellera quel atelier est actif pour chaque onglet de la fenêtre d'affichage @@ -12206,7 +12221,7 @@ after FreeCAD launches If unchecked, %1 will not appear in the available workbenches. - Si non coché, %1 n'apparaîtra pas dans les ateliers disponibles. + Si cette option n'est pas cochée, %1 n'apparaîtra pas dans les ateliers disponibles. @@ -12226,7 +12241,7 @@ after FreeCAD launches If checked, %1 will be loaded automatically when FreeCAD starts up - Si coché, %1 sera chargé automatiquement lorsque FreeCAD démarrera + Si cette option est cochée, %1 sera chargé automatiquement lorsque FreeCAD démarrera. @@ -12348,12 +12363,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Cube de navigation déplaçable - + Drag and place NaviCube Glisser et placer le NaviCube @@ -12361,32 +12376,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT AVANT - + TOP HAUT - + RIGHT DROITE - + REAR ARRIÈRE - + BOTTOM BAS - + LEFT GAUCHE @@ -12628,7 +12643,7 @@ after FreeCAD launches Default unit system: - Default unit system: + Système d'unités par défaut : @@ -12648,7 +12663,7 @@ after FreeCAD launches If enabled, document unit systems are ignored - Si cette case est cochée, les systèmes d'unités des documents seront ignorés + Si cette option est cochée, les systèmes d'unités des documents seront ignorés. @@ -12783,9 +12798,8 @@ Voir le Wiki de FreeCAD pour plus de détails sur l'image. A Splash screen is a small loading window that is shown when FreeCAD is launching. If this option is checked, FreeCAD will display the splash screen - Un écran de démarrage est une petite fenêtre de chargement qui s'affiche -lors du lancement de FreeCAD. Si cette option est cochée, FreeCAD affichera -l'écran de démarrage + Un écran de démarrage est une petite fenêtre de chargement qui s'affiche lors du lancement de FreeCAD. +Si cette option est cochée, FreeCAD affichera l'écran de démarrage. @@ -12873,47 +12887,47 @@ l'écran de démarrage Personnalisé (%1px) - + Combo View Vue combinée - + TreeView and PropertyView Arborescence et Propriétés - + Preference Pack Name Nom du kit de préférences - + Tags Mots-clés - + Apply Appliquer - + Apply the %1 preference pack Appliquer le kit de préférences %1 - + Choose a FreeCAD config file to import Choisir un fichier de configuration de FreeCAD à importer - + File exists Le fichier existe - + A preference pack with that name already exists. Overwrite? Un kit de préférences portant ce nom existe déjà. Voulez-vous l'écraser ? @@ -13626,7 +13640,7 @@ Le clic automatique n'est activé que si tous les pixels de la région sont non Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Afficher la vue des propriétés, qui affiche les propriétés de l'objet sélectionné. diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 9b3a746eb4..b316f5b1da 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -117,7 +117,7 @@ Editar - + Import Importar @@ -188,8 +188,8 @@ Emprazamento - + Transform Transformar @@ -421,42 +421,42 @@ EditMode - + Default Por defecto - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Tallado - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Cor - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Axustes da cámara - + Orientation Orientación - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -2459,72 +2459,72 @@ Por favor, especifique outro directorio. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Limpar axustes de usuario - + Do you want to clear all your user settings? Quere desbotar tódolos axustes de usuario? - + If you agree all your settings will be cleared. Se acepta desbotaranse tódolos axustes feitos. - + Wrong parameter Parámetro incorrecto - + Restart required Restart required - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2861,36 +2861,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Axis cross will be shown by default at file opening or creation - + Show axis cross by default Mostrar a cruz do eixe por defecto - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - + Show counter of frames per second Amosar o contador de imaxes por segundo - + Rendering Renderización - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2899,22 +2899,22 @@ Changing this option requires a restart of the application. Changing this option requires a restart of the application. - + Use software OpenGL Usa software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Empregar OpenGL VBO (Vertex Buffer Object) - + Render cache Renderizar caché - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2937,7 +2937,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2954,92 +2964,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Automático - + Distributed Distribución - + Centralized Centralizado - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Ningún - + Line Smoothing Suavizado de líñas - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Obxectos transparentes: - + Render types of transparent objects Render types of transparent objects - + One pass Unha pasada - + Backface pass Pase de cara posterior - + Marker size: Tamaño do marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Distancia entre ollos para os modos estéreo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3048,48 +3058,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color Backlight is enabled with the defined color - - + + Backlight color Cor da luz de fondo - + Intensity Intensidade - + Intensity of the backlight Intensidade de luz de fondo - + Camera type Tipo de cámara - + Objects will appear in a perspective projection Objects will appear in a perspective projection - + Perspective renderin&g Renderizació&n en perspectiva - + Objects will be projected in orthographic projection Objects will be projected in orthographic projection - + Or&thographic rendering Renderización or&togonal @@ -3101,57 +3111,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-Aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Abra unha nova vista ou reinicie %1 para aplicar os cambios de ante-entrelazado. @@ -4042,7 +4052,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navegación @@ -4128,68 +4138,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Cor - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navegación 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - + Mouse... Rato... - + Navigation settings set Navigation settings set - + Orbit style Estilo orbital - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4200,136 +4220,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Plataforma xiratoria - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Modo de rotación - + Rotations in 3D will use current cursor position as center for rotation Rotations in 3D will use current cursor position as center for rotation - + Window center Centro da fiestra - + Drag at cursor Arrastra o cursor - + Object center Centro do obxecto - + Default camera orientation Default camera orientation - + Default camera orientation when creating a new document or selecting the home view Default camera orientation when creating a new document or selecting the home view - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Zoom operations will be performed at position of mouse pointer - + Zoom at cursor Zoom no cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted Direction of zoom operations will be inverted - + Invert zoom Inverter Zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4338,57 +4358,57 @@ Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture Desactiva o xesto de inclinación de pantalla táctil - + Isometric Isométrica - + Dimetric Dimétrica - + Trimetric Trimétrica - + Top Enriba - + Front Fronte - + Left Esquerda - + Right Dereita - + Rear Traseira - + Bottom Embaixo - + Custom Personalizar @@ -5646,7 +5666,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Vista de propiedades @@ -6111,15 +6131,15 @@ Quere gardar os cambios? Formato PDF - + Graphviz format Graphviz format + - Export graph Exportar gráfico @@ -6704,14 +6724,14 @@ No lado dereito escolléronse %2. Gui::PropertyView - - + + View Vista - - + + Data Datos @@ -7686,22 +7706,22 @@ Quere especificar outro directorio? Gui::View3DInventor - + Export PDF Exportar en PDF - + PDF file Ficheiro PDF - + Opening file failed Falla ó abrir o ficheiro - + Can't open file '%1' for writing. Non se pode abrir o ficheiro '%1' para escrita. @@ -7961,45 +7981,45 @@ Quere especificar outro directorio? Python - - - + + + Unknown filetype Tipo de ficheiro descoñecido - - + + Cannot open unknown filetype: %1 Non se pode abrir o ficheiro de tipo descoñecido: %1 - + Export failed Erro ao exportar - + Cannot save to unknown filetype: %1 Non se pode gardar o ficheiro de tipo descoñecido: %1 - + Workbench failure Falla da bancada de traballo - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8050,8 +8070,8 @@ Quere especificar outro directorio? Exportando en PDF... - + Unsaved document Documento non gardado @@ -8618,7 +8638,7 @@ Por favor, abra un buscador e escriba: http://localhost:%1. Non se pode atopar o ficheiro %1 nin en %2 nin en %3 - + Navigation styles Estilos de navegación @@ -8919,8 +8939,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8936,192 +8956,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Vista en árbore - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10054,8 +10069,8 @@ the current copy will be lost. Abrir un documento novo baleiro - + Unnamed Sen nome @@ -12365,12 +12380,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12378,32 +12393,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12890,47 +12905,47 @@ display the splash screen Personalizado (%1px) - + Combo View Vista combinada - + TreeView and PropertyView TreeView and PropertyView - + Preference Pack Name Preference Pack Name - + Tags Etiquetas - + Apply Aplicar - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists File exists - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index dfe1c1e273..d72673fa45 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -117,7 +117,7 @@ Uredi - + Import Uvoz @@ -188,8 +188,8 @@ Položaj - + Transform Transformiraj @@ -421,42 +421,42 @@ EditMode - + Default Inicijalno - + The object will be edited using the mode defined internally to be the most appropriate for the object type Objekt će se uređivati pomoću definiranog unutarnjeg načina rada kako bi bio najprimjereniji za vrstu objekta - + Transform Transformiraj - + The object will have its placement editable with the Std TransformManip command Objekt će imati svoju poziciju uređivu pomoću naredbe Std TransformManip - + Cutting Rezanje - + This edit mode is implemented as available but currently does not seem to be used by any object Ovaj način uređivanja implementiran je kao dostupan, ali trenutno se ne čini da ga koristi niti jedan objekt - + Color Boja - + The object will have the color of its individual faces editable with the Part FaceColors command Objekt će imati boju svojih pojedinačnih površina uređivu pomoću naredbe Part FaceColors @@ -789,37 +789,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Postavke kamere - + Orientation Orijentacija - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni prikaz @@ -2458,72 +2458,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Resetiraj stranicu '%1'... - + Resets the user settings for the page '%1' Resetira korisnička podešavanja za stranicu '%1' - + Reset group '%1'... Resetiraj grupu '%1'... - + Resets the user settings for the group '%1' Resetira korisnička podešavanja za grupu '%1' - + Reset all... Resetiraj sve... - + Resets the user settings entirely Resetira korisnička podešavanja u potpunosti - + Clear user settings Brisanje korisničkih postavki - + Do you want to clear all your user settings? Želite li obrisati sve vaše korisničke postavke? - + If you agree all your settings will be cleared. Ako se slažete sve vaše postavke će biti izbrisane. - + Wrong parameter Pogrešan parametar - + Restart required Potrebno je ponovo pokretanje - + You must restart FreeCAD for changes to take effect. Za primjenu promjene, ponovo pokreni FreeCAD. - + Restart now Ponovno pokreni sada - + Restart later Ponovno pokreni kasnije @@ -2862,7 +2862,7 @@ in the corner -- in % of height/width of viewport u kutu -- u % visine/širine okvira za prikaz - + Axis cross will be shown by default at file opening or creation Križ osi prema zadanom će biti prikazan kod @@ -2871,12 +2871,12 @@ otvaranja ili stvaranja datoteke - + Show axis cross by default Prikaz križa osi kao zadana postavka - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Vrijeme potrebno za posljednji rad i rezultirajuća brzina kadra @@ -2884,17 +2884,17 @@ prikazat će se u donjem lijevom kutu otvorenih datoteka - + Show counter of frames per second Pokaži brojač sličica u sekundi - + Rendering Iscrtati - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2905,22 +2905,22 @@ Za promjenu ove opcije potrebno je ponovno pokretanje aplikacije. - + Use software OpenGL koristi program OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Koristi OpenGL VBO (Vertex Buffer Object) - + Render cache Privremena memorija iscrtavanja - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2943,7 +2943,17 @@ problema u rasponu od grafičkih anomalija do grešaka pada GPU-a . Zapamtite prijavite ovu postavku ako ste je omogućili kada tražite podršku na FreeCAD forumima - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2960,92 +2970,92 @@ samo pred-memorija na korijenskom čvoru grafikona scene. To nudi najbržu brzin ali sporiji odgovor na bilo kakve promjene scena. - + Auto Automatski - + Distributed Raspodijeljeno - + Centralized Centralizirano - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used Kakva vrsta višestrukih uzoraka se koristi - + None Prazno - + Line Smoothing Zaglađivanje linije - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: Prozirni objekti: - + Render types of transparent objects Vrste iscrtavanja za prozirne objekte - + One pass Jedan prolaz - + Backface pass Dodatni prolaz crtanja pozadine - + Marker size: Veličina Oznake: - + Size of vertices in the Sketcher, TechDraw and other workbenches Veličina vrhova u Crtaču, TehnCrtanje i drugim radnim prostorima. - + Eye to eye distance for stereo modes Udaljenost od oka do oka za stereo mode - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3054,48 +3064,48 @@ Navedena vrijednost je faktor koji će se pomnožiti s veličinom graničnog okvira 3D objekta koji se trenutno prikazuje. - + Backlight is enabled with the defined color Pozadinsko osvjetljenje omogućeno je definiranom bojom - - + + Backlight color Boja pozadinskog osvjetljenja - + Intensity Intenzitet - + Intensity of the backlight Intenzitet pozadinskog osvjetljenja - + Camera type Tip kamere - + Objects will appear in a perspective projection Objekti će se pojaviti u perspektivnoj projekciji - + Perspective renderin&g Perspektivna iscrtavanja - + Objects will be projected in orthographic projection Objekti će se projektirati u ortografskoj projekciji - + Or&thographic rendering Or&tografsko iscrtavanje @@ -3107,57 +3117,57 @@ veličinom graničnog okvira 3D objekta koji se trenutno prikazuje. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Izglađivanje - + Open a new viewer or restart %1 to apply anti-aliasing changes. Otvori novi preglednik ili ponovno pokreni %1 za dodavanje promjena izglađivanja. @@ -4061,7 +4071,7 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigacija @@ -4149,46 +4159,56 @@ Možete koristiti i obrazac: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Boja - + Base color for all elements Osnovna boja za sve elemente - + Rotation center indicator Indikator centra rotacije - + Sphere size Veličina kugle - + Color and transparency Boja i prozirnost - + The size of the rotation center indicator Veličina indikatora centra rotacije - + The color of the rotation center indicator Boja indikatora centra rotacije - + 3D Navigation 3D navigacija - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Navedite konfiguracije gumba miša za svaku odabranu navigacijsku postavku. @@ -4196,22 +4216,22 @@ Odaberite set, a zatim pritisnite gumb za prikaz navedenih konfiguracija. - + Mouse... Miš... - + Navigation settings set Set navigacijskih postavki - + Orbit style Način okretanja - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4222,66 +4242,66 @@ Okretna ploča: dio će se rotirati oko z-osi (s ograničenim osima). Free Turntable: dio će se rotirati oko z-osi. - + Turntable Okretano - + Trackball Prećeno - + Free Turntable Slobodna okretna ploča - + Rotation mode Način rotacije - + Rotations in 3D will use current cursor position as center for rotation Rotacije u 3D upotrebljavat će trenutni položaj pokazivača kao središte rotacije - + Window center Središte prozora - + Drag at cursor Povucite kod pokazivača - + Object center Središte objekta - + Default camera orientation Zadana orijentacija kamere - + Default camera orientation when creating a new document or selecting the home view Zadana orijentacija kamere prilikom izrade novog dokumenta ili odabira zadanog početnog prikaza - + Camera zoom Zumiranje kamere - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Postavlja zumiranje za nove dokumente. @@ -4289,74 +4309,74 @@ Vrijednost je promjer sfere koja će stati na zaslon. - + mm mm - + Animations Animacije - + Enable spinning animations that are used in some navigation styles after dragging Omogućite animacije rotiranja koje se koriste u nekim stilovima navigacije nakon povlačenja - + Enable spinning animations Omogućite animacije rotiranja - + Duration of navigation animations that have a fixed duration Trajanje animacija navigacije koje imaju fiksno trajanje - + Animation duration Trajanje animacije - + The duration of navigation animations in milliseconds Trajanje animacija navigacije u milisekundama - + Zoom step Korak zumiranja - + Zoom operations will be performed at position of mouse pointer Operacije zumiranja izvodit će se na položaju pokazivača miša - + Zoom at cursor Približavaj na kursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Koliko će se zumirati. Korak zumiranja '1' znači faktor 7,5 za svaki korak zumiranja. - + Direction of zoom operations will be inverted Smjer operacija zumiranja će se obrnuti - + Invert zoom Invertiraj zumiranje - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4365,57 +4385,57 @@ Utječe samo na navigacijski stil gestama. Naginjanje miša nije onemogućeno ovom postavkom. - + Disable touchscreen tilt gesture Onemogući nagib geste zaslona osjetljivog na dodir - + Isometric Izometrički - + Dimetric Dvometrički - + Trimetric Trimetrički - + Top Gore - + Front Ispred - + Left Lijevo - + Right Desno - + Rear Iza - + Bottom Ispod - + Custom Prilagođeno @@ -5678,7 +5698,7 @@ izvorno odabranim prije otvaranja ovog dijaloškog okvira Gui::DockWnd::PropertyDockView - + Property View Prikaz Svojstava @@ -6141,15 +6161,15 @@ Do you want to save your changes? PDF format - + Graphviz format Graphviz format + - Export graph Izvoz grafikona @@ -6738,14 +6758,14 @@ Kako želite nastaviti? Gui::PropertyView - - + + View Pregled - - + + Data Podaci @@ -7721,22 +7741,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Izvoz PDF - + PDF file PDF Datoteka - + Opening file failed Otvaranje dokumenta nije uspjelo - + Can't open file '%1' for writing. Ne mogu otvoriti dokument '%1' za ispis. @@ -7996,45 +8016,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Nepoznata vrsta datoteke - - + + Cannot open unknown filetype: %1 Ne mogu otvoriti nepoznatu vrstu datoteke: %1 - + Export failed Izvoz neuspješan - + Cannot save to unknown filetype: %1 Ne mogu spremiti nepoznatu vrstu datoteke: %1 - + Workbench failure Workbench neuspjeh - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ovaj sustav radi OpenGL %1.%2. FreeCAD zahtijeva OpenGL 2.0 ili noviji. Po potrebi nadogradite grafički upravljački program i/ili karticu. - + Invalid OpenGL Version Pogrešna OpenGL Verzija @@ -8085,8 +8105,8 @@ Do you want to specify another directory? Izvoz PDF ... - + Unsaved document Nespremljeni dokument @@ -8661,7 +8681,7 @@ Please open a browser window and type in: http://localhost:%1. Ne mogu pronaći datoteku %1 niti u %2 niti u %3 - + Navigation styles Načini navigacije @@ -8960,8 +8980,8 @@ trenutnu kopiju će biti izgubljene. Uključite/isključite prekrivanje - + Toggle floating window Uključite/isključite slobodan prozor @@ -8977,192 +8997,187 @@ trenutnu kopiju će biti izgubljene. Pritisni ESC za skrivanje savjeta - + UI UI (Korisničko sučelje) - + Tree view Pogled hijerarhije - + Item background color Boja pozadine stavke - + Item background padding Ispuna pozadine stavke - + Resizable columns Promjenjive kolone - - Show item checkbox - Prikaži okvir za izbor stavke - - - + Hide extra column Skriva dodatnu kolonu - + Hide scroll bar Skriva klizač - + Hide header Skriva zaglavlje - + IconSize Veličina Ikone - + FontSize Veličina Pisma - + ItemSpacing Razmak stavke - + Overlay Preklapanje - + Hide tab bar Skriva traku kartica - + Hide property view scroll bar Skriva klizač prikaza svojstava - + Auto hide in non 3D view Automatski sakrij u ne-3D pogledu - + Auto mouse pass through Automatsko propuštanje miša - + Auto mouse wheel pass through Automatsko propuštanje kotača miša - + Delay mouse wheel pass through (ms) Kašnjenje prolaska miša (ms) - + Alpha test radius Alfa test polumjer - + Check Navigation Cube Provjeri Navigacijsku kocku - + Hint trigger size Veličina praga obavijesti - + Hint width Širina obavijesti - + Left panel hint offset Odmak nagovijesti lijevog panela - + Left panel hint length Dužina obavijesti lijevog panela - + Right panel hint offset Odmak nagovijesti desnog panela - + Right panel hint length Dužina nagovijesti desnog panela - + Top panel hint offset Odmak nagovijesti gornjeg panela - + Top panel hint length Dužina nagovijesti gornjeg panela - + Bottom panel hint offset Odmak nagovijesti donjeg panela - + Bottom panel hint length Dužina nagovijesti donjeg panela - + Hint show tab bar Obavijest pokaži traku kartica - + Hint delay (ms) Kašnjenje nagovijesti (ms) - + Splitter auto hide delay (ms) Razmak sakrij automatski kašnjenje (ms) - + Activate on hover Aktiviraj kod lebdenja - + Layout delay (ms) Razmještaj kašnjenje (ms) - + Animation duration (ms) Trajanje animacije (ms) - + Animation curve type Vrsta krivulje animacije @@ -10102,8 +10117,8 @@ trenutnu kopiju će biti izgubljene. Kreira novi prazni dokument - + Unnamed Neimenovano @@ -12426,12 +12441,12 @@ nakon pokretanja FreeCAD-a NaviCubeDraggableCmd - + Movable navigation cube Pokretna navigacijska kocka - + Drag and place NaviCube Prevuci i postavi Navigacijsku kocku @@ -12439,32 +12454,32 @@ nakon pokretanja FreeCAD-a NaviCubeSettings - + FRONT PREDNJE - + TOP GORNJE - + RIGHT DESNO - + REAR ZADNJE - + BOTTOM DONJE - + LEFT LIJEVO @@ -12952,47 +12967,47 @@ prikazivati splash ekran Prilagođeno (%1px) - + Combo View Kombinirani pregled - + TreeView and PropertyView Stablasti pregled i Pregled svojstva - + Preference Pack Name Ime paketa postavki - + Tags Oznake - + Apply Primijeni - + Apply the %1 preference pack Primjeni %1 paket postavki - + Choose a FreeCAD config file to import Odaberite FreeCAD konfiguracijsku datoteku za uvoz - + File exists Datoteka postoji - + A preference pack with that name already exists. Overwrite? Postavka s ovim nazivom paketa već postoji! Prepisati? diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 0fda9577d4..dc873011d9 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -117,7 +117,7 @@ Szerkesztés - + Import Importálás @@ -188,8 +188,8 @@ Elhelyezés - + Transform Átalakítás @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Véletlenszerű szín beállítása @@ -421,42 +421,42 @@ EditMode - + Default Alapértelmezett - + The object will be edited using the mode defined internally to be the most appropriate for the object type A tárgy szerkesztése a belsőleg meghatározott, az tárgy típusnak legmegfelelőbb módban történik - + Transform Átalakítás - + The object will have its placement editable with the Std TransformManip command A tárgy elhelyezése az Std TransformManip paranccsal lesz szerkeszthető - + Cutting Vágás - + This edit mode is implemented as available but currently does not seem to be used by any object Ez a szerkesztési mód elérhető, de jelenleg úgy tűnik, hogy egyetlen tárgy sem használja - + Color Szín - + The object will have the color of its individual faces editable with the Part FaceColors command A tárgy egyes felületeinek színe a alkatrész FaceColors paranccsal lesz szerkeszthető @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamera beállításai - + Orientation Tájolás - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuális nézet @@ -2455,72 +2455,72 @@ Kérem válasszon másik könyvtárat. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... '%1' lap visszaállítása... - + Resets the user settings for the page '%1' Visszaállítja a '%1' lap felhasználói beállításait - + Reset group '%1'... '%1' csoport visszaállítása... - + Resets the user settings for the group '%1' Visszaállítja a '%1' csoport felhasználói beállításait - + Reset all... Mindent visszaállít... - + Resets the user settings entirely A felhasználói beállítások teljes visszaállítása - + Clear user settings Törölje a felhasználói beállítások - + Do you want to clear all your user settings? Szeretné törölni az összes felhasználói beállításait? - + If you agree all your settings will be cleared. Ha elfogadja az összes beállítása törlődni fog. - + Wrong parameter Hibás paraméter - + Restart required Újraindítás szükséges - + You must restart FreeCAD for changes to take effect. A módosítások érvénybe léptetéséhez újra kell indítania a FreeCAD-et. - + Restart now Újraindítás most - + Restart later Újraindítás később @@ -2787,7 +2787,7 @@ Kérem válasszon másik könyvtárat. TextLabel - Szövegcimke + Szövegfelirat @@ -2857,36 +2857,36 @@ in the corner -- in % of height/width of viewport a betekintés sarkában - a magasság /szélesség százalékában - + Axis cross will be shown by default at file opening or creation A tengelykereszteződés alapértelmezés szerint megjelenik a fájl megnyitásakor vagy létrehozásakor - + Show axis cross by default Tengely kereszteződés mutatása alapértelmezetten - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Az utolsó művelethez és az eredményül kapott képkockasebességhez szükséges idő a bal alsó sarokban jelenik meg a megnyitott fájlokban - + Show counter of frames per second A keret / másodperc mutatása - + Rendering Igazít - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. A beállítás módosításához újra kell indítani az alkalmazást. - + Use software OpenGL Szoftveres OpenGL használata - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO (Csúcspont pufferobjektum) használata - + Render cache Gyorsítótár leképzése - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2933,7 +2933,17 @@ grafikus anomáliáktól a GPU összeomlási hibákig, generál. Ne feledje, hog jelentse ezt a beállítást engedélyezve, amikor támogatást kér a FreeCAD fórumokon - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2948,92 +2958,92 @@ Ennek elérésére 3 lehetőség áll rendelkezésre: 3) 'Központosított', manuálisan kapcsolja ki a gyorsítótárat az összes nézetszolgáltató összes csomópontjában, és csak a helyszínen rajzolt grafikus gyökér csomópontot gyorsítja. Ez a leggyorsabb gyorsító sebesség, de lassabban válaszol minden jelenet változásokra. - + Auto Automatikus - + Distributed Elosztott - + Centralized Központosított - + Anti-Aliasing Élsimítás - + What kind of multisample anti-aliasing is used Milyen több mintavételes élsimítást használ - + None Egyik sem - + Line Smoothing Vonal simítás - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: Átlátszó tárgyak: - + Render types of transparent objects Áttetsző objektumok gyorsítótárazása - + One pass Egy áthaladás - + Backface pass Hátsó lap áthaladás - + Marker size: Jelölő mérete: - + Size of vertices in the Sketcher, TechDraw and other workbenches A csúcsok mérete a vázlatkészítő, műszskirajz és más munkafelületen - + Eye to eye distance for stereo modes Szemtől szembeni távolság a sztereó módban - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3042,48 +3052,48 @@ A megadott érték olyan tényező, amelyet megszoroz az aktuálisan megjelenített 3D tárgy határolókeret méretével. - + Backlight is enabled with the defined color Háttérvilágítás engedélyezve van a meghatározott színnel - - + + Backlight color Háttérvilágítás színe - + Intensity Intenzitás - + Intensity of the backlight Háttérvilágítás intenzitása - + Camera type Kamera típus - + Objects will appear in a perspective projection Az objektumok távoli nézet vetítésben jelennek meg - + Perspective renderin&g Perspektivikus leképezés - + Objects will be projected in orthographic projection Az objektumok függőleges vetületi vetítésben jelennek meg - + Or&thographic rendering Egyenesvonalú leképzés @@ -3095,57 +3105,57 @@ az aktuálisan megjelenített 3D tárgy határolókeret méretével. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Élsimítás - + Open a new viewer or restart %1 to apply anti-aliasing changes. Nyisson megy egy új megjelenítőt, vagy indítsa újra a %1, az élsimítás változtatások alkalmazásához. @@ -4037,7 +4047,7 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigáció @@ -4123,68 +4133,78 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Szín - + Base color for all elements Alapszín minden elemnek - + Rotation center indicator Forgatási középpont kijelző - + Sphere size Gömb méret - + Color and transparency Szín és átlátszóság - + The size of the rotation center indicator A forgásközéppont-jelző mérete - + The color of the rotation center indicator A forgásközéppont-jelző színe - + 3D Navigation 3D-s navigáció - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Felsorolja az egérgomb konfigurációját az egyes kijelölt navigációs beállításokhoz. Jelöljön ki egy beállítást, majd nyomja meg a gombot a beállítások megtekintéséhez. - + Mouse... Egér ... - + Navigation settings set A navigációs sáv beállításai mentésre kerültek - + Orbit style Orbit stílus - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4195,136 +4215,136 @@ Forgóasztal: az alkatrészt a z-tengely körül forgatják (korlátozott tengel Szabad forgóasztal: az alkatrész a z tengely körül forog. - + Turntable Fordítótábla - + Trackball Trackball - + Free Turntable Forgóasztal - + Rotation mode Elforgatási mód - + Rotations in 3D will use current cursor position as center for rotation A 3D-ben való elforgatás az aktuális kurzorpozíciót fogja használni forgatási központként - + Window center Az ablak közepére - + Drag at cursor Húzás a kurzornál - + Object center A tárgy központba - + Default camera orientation Szabványos kamerabeállítás - + Default camera orientation when creating a new document or selecting the home view Az új dokumentumok szabványos kamera tájolása vagy az otthoni nézet kiválasztásakor - + Camera zoom Nagyítás a nézeten - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Beállítja az új dokumentumok kameranagyítását. Az érték a képernyőn elférő gömb átmérője. - + mm mm - + Animations Animációk - + Enable spinning animations that are used in some navigation styles after dragging Egyes navigációs stílusokban használt pörgő animációk engedélyezése húzás után - + Enable spinning animations Pörgő animáció engedélyezése - + Duration of navigation animations that have a fixed duration A rögzített időtartamú navigációs animációk időtartama - + Animation duration Animáció hossza - + The duration of navigation animations in milliseconds A navigációs animációk időtartama milliszekundumban kifejezve - + Zoom step Nagyítási lépték - + Zoom operations will be performed at position of mouse pointer A nagyítási műveleteket az egérmutató helyén hajtják végre - + Zoom at cursor Kurzorra nagyítás - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Mennyire nagyítson. Az '1' nagyítási lépés minden nagyítási lépésnél 7,5-ös tényezőt jelent. - + Direction of zoom operations will be inverted A nagyítási műveletek iránya megfordul - + Invert zoom Zoomolás megfordítása - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4333,57 +4353,57 @@ Csak a kézmozdulat-navigációs stílusra vonatkozik. Ez a beállítás nem tiltja le az egér megdöntése beállítást. - + Disable touchscreen tilt gesture Érintőképernyős döntés kikapcsolása - + Isometric Izometrikus - + Dimetric Dimetrikus - + Trimetric Trimetrikus - + Top Felülnézet - + Front Elölnézet - + Left Bal - + Right Jobb oldalnézet - + Rear Hátsó nézet - + Bottom Alsó - + Custom Egyéni @@ -5639,7 +5659,7 @@ párbeszédpanel megnyitása előtt kiválasztott tárgyak folytatása Gui::DockWnd::PropertyDockView - + Property View Tulajdonságok nézet @@ -6104,15 +6124,15 @@ El akarja menteni a változásokat? PDF formátum - + Graphviz format Graphviz formátum + - Export graph Export grafikon @@ -6697,14 +6717,14 @@ a jobboldali nézetben %2 pont lett jelölve. Gui::PropertyView - - + + View Nézet - - + + Data Adat @@ -7057,7 +7077,7 @@ Meg szeretne adni egy másik könyvtárat? TextLabel - Szövegfelirat + Szövegcimke @@ -7677,22 +7697,22 @@ Meg szeretne adni egy másik könyvtárat? Gui::View3DInventor - + Export PDF Exportálás PDF-be - + PDF file PDF-fájl - + Opening file failed Fájl megnyitása sikertelen - + Can't open file '%1' for writing. Nem lehet megnyitni a(z) '%1' fájlt írásra. @@ -7952,45 +7972,45 @@ Meg szeretne adni egy másik könyvtárat? Python - - - + + + Unknown filetype Ismeretlen filetípus - - + + Cannot open unknown filetype: %1 Nem megnyitható fájltípus: %1 - + Export failed Exportálás sikertelen - + Cannot save to unknown filetype: %1 Nem menthető fájltípus: %1 - + Workbench failure Munkafelület hiba - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ezen a rendszeren OpenGL %1.%2 fut. A FreeCAD-hez OpenGL 2.0 vagy magasabb verziószám szükséges. Kérjük, szükség szerint frissítse grafikus illesztőprogramját és/vagy kártyáját. - + Invalid OpenGL Version Érvénytelen OpenGL verzió @@ -8041,8 +8061,8 @@ Meg szeretne adni egy másik könyvtárat? PDF exportálása... - + Unsaved document Nem mentett dokumentum @@ -8611,7 +8631,7 @@ Nyisson meg egy böngészőt, és írja be: http://localhost:%1. Nem talál fájlt %1 -ben %2 -ben, sem %3 -ban - + Navigation styles Navigációs stílusok @@ -8912,8 +8932,8 @@ az aktuális példány elveszik. Átfedés váltása - + Toggle floating window Lebegő ablak váltása @@ -8929,199 +8949,194 @@ az aktuális példány elveszik. Nyomja meg az ESC gombot a súgó elrejtéséhez - + UI Felhasználói felület - + Tree view Fanézet - + Item background color Elem háttér szín - + Item background padding Elem hátterének kitöltése - + Resizable columns Átméretezhető oszlopok - - Show item checkbox - Elem megjelenítése jelölőnégyzet - - - + Hide extra column Extra oszlop elrejtése - + Hide scroll bar Görgetősáv elrejtése - + Hide header Fejléc elrejtése - + IconSize Ikon méret - + FontSize Betűméret - + ItemSpacing Elem elhelyezkedés - + Overlay Átfedés - + Hide tab bar Tabsáv elrejtése - + Hide property view scroll bar Tulajdonságnézet görgetősáv elrejtése - + Auto hide in non 3D view Automatikus elrejtés nem 3D nézetben - + Auto mouse pass through Automatikus egér áthaladás - + Auto mouse wheel pass through Automatikus egér görgő áthaladás - + Delay mouse wheel pass through (ms) Az egérgörgő áthaladásának késleltetése (ms) - + Alpha test radius Átlátszó tesztsugár - + Check Navigation Cube Navigációs négyzet vizsgálata - + Hint trigger size Tipp kapcsoló mérete - + Hint width Tipp szélesség - + Left panel hint offset Bal oldali panel tipp eltolás - + Left panel hint length Bal oldali panel tipp hossz - + Right panel hint offset Jobb oldali panel tipp eltolás - + Right panel hint length Jobb oldali panel tipp hossz - + Top panel hint offset Felső panel tipp eltolás - + Top panel hint length Felső panel tipp hossz - + Bottom panel hint offset Alsó panel tipp eltolás - + Bottom panel hint length Alsó panel tipp hossz - + Hint show tab bar Tipp tabulátor sáv megjelenítése - + Hint delay (ms) Tipp késleltetés (ms) - + Splitter auto hide delay (ms) Osztó automatikus elrejtési késleltetés (ms) - + Activate on hover Aktiválás rámutatáskor - + Layout delay (ms) Elrendezési késleltetés (ms) - + Animation duration (ms) Animáció hossza (ms) - + Animation curve type Animációs görbe típusa Active object - Active object + Aktív tárgy @@ -10047,8 +10062,8 @@ az aktuális példány elveszik. Új üres munkalap létrehozása - + Unnamed Névtelen @@ -12358,12 +12373,12 @@ a FreeCAD elindítása után NaviCubeDraggableCmd - + Movable navigation cube Mozgatható navigációs kocka - + Drag and place NaviCube Húzd és helyezd NaviCube @@ -12371,32 +12386,32 @@ a FreeCAD elindítása után NaviCubeSettings - + FRONT ELÜLSŐ - + TOP FELSŐ - + RIGHT JOBB - + REAR HÁTSÓ - + BOTTOM ALSÓ - + LEFT BAL @@ -12638,7 +12653,7 @@ a FreeCAD elindítása után Default unit system: - Default unit system: + Alapértelmezett mértékegység rendszer: @@ -12882,47 +12897,47 @@ megjeleníti a kezdő képet Egyéni (%1px) - + Combo View Összetett nézet - + TreeView and PropertyView FaNézet és TulajdonságNézet - + Preference Pack Name Preferencia csomag név - + Tags Címkék - + Apply Alkalmaz - + Apply the %1 preference pack Preferenciacsomag alkalmazása: %1 - + Choose a FreeCAD config file to import Válassza ki az importálni kívánt FreeCAD konfigurációs fájlt - + File exists A fájl létezik - + A preference pack with that name already exists. Overwrite? Már létezik ilyen nevű preferenciacsomag. Felülírja? @@ -13645,7 +13660,7 @@ A teljes hely kitöltéséhez állítsa 0-ra. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + A tulajdonságnézet megjelenítése, amely a kiválasztott tárgy tulajdonságait jeleníti meg. diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index 9a122bf6df..2ff121adf3 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -117,7 +117,7 @@ Edit - + Import Impor @@ -188,8 +188,8 @@ Penempatan - + Transform Transform @@ -421,42 +421,42 @@ EditMode - + Default Bawaan - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Transform - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Pemotongan - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Warna - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Setelan kamera - + Orientation Orientasi - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Tampilan aktif @@ -2456,72 +2456,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Hapus pengaturan pengguna - + Do you want to clear all your user settings? Apakah Anda ingin menghapus semua pengaturan pengguna Anda? - + If you agree all your settings will be cleared. Jika Anda setuju semua pengaturan Anda akan dihapus. - + Wrong parameter Parameter yang salah - + Restart required Diperlukan mulai ulang - + You must restart FreeCAD for changes to take effect. Anda harus memulai ulang FreeCAD agar perubahan diterapkan. - + Restart now Mulai ulang sekarang - + Restart later Mulai ulang nanti @@ -2858,36 +2858,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Axis cross will be shown by default at file opening or creation - + Show axis cross by default Show axis cross by default - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - + Show counter of frames per second Tampilkan counter frame per detik - + Rendering Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2896,22 +2896,22 @@ Changing this option requires a restart of the application. Changing this option requires a restart of the application. - + Use software OpenGL Use software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Use OpenGL VBO (Vertex Buffer Object) - + Render cache Render cache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Mobil - + Distributed Distributed - + Centralized Centralized - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Tidak ada - + Line Smoothing Line Smoothing - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Transparent objects: - + Render types of transparent objects Render types of transparent objects - + One pass One pass - + Backface pass Backface pass - + Marker size: Marker size: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Eye to eye distance for stereo modes - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color Backlight is enabled with the defined color - - + + Backlight color Warna lampu latar - + Intensity Intensitas - + Intensity of the backlight Intensitas lampu latar - + Camera type Tipe kamera - + Objects will appear in a perspective projection Objects will appear in a perspective projection - + Perspective renderin&g Perspektif renderin & g - + Objects will be projected in orthographic projection Objects will be projected in orthographic projection - + Or&thographic rendering Atau & thographic rendering @@ -3098,57 +3108,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Buka penampil baru atau mulai ulang % 1 untuk menerapkan perubahan anti-aliasing. @@ -4037,7 +4047,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigasi @@ -4123,68 +4133,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Warna - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Warna dan transparansi - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navigasi 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - + Mouse... Mouse... - + Navigation settings set Navigation settings set - + Orbit style Gaya Orbit - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4195,136 +4215,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Turntable - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Mode rotasi - + Rotations in 3D will use current cursor position as center for rotation Rotations in 3D will use current cursor position as center for rotation - + Window center Pusat jendela - + Drag at cursor Drag at cursor - + Object center Pusat objek - + Default camera orientation Orientasi kamera bawaan - + Default camera orientation when creating a new document or selecting the home view Default camera orientation when creating a new document or selecting the home view - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Zoom operations will be performed at position of mouse pointer - + Zoom at cursor Perbesar kursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted Direction of zoom operations will be inverted - + Invert zoom Balikkan zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4333,57 +4353,57 @@ Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture Disable touchscreen tilt gesture - + Isometric Isometrik - + Dimetric Dimetrik - + Trimetric Trimetrik - + Top Puncak - + Front Depan - + Left Kiri - + Right Kanan - + Rear Belakang - + Bottom Bawah - + Custom Adat @@ -5639,7 +5659,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Tampilan properti @@ -6101,15 +6121,15 @@ Do you want to save your changes? Format PDF - + Graphviz format Graphviz format + - Export graph Grafik ekspor @@ -6689,14 +6709,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Tampilan - - + + Data Data @@ -7015,7 +7035,7 @@ Do you want to specify another directory? Position - Posisi + Position @@ -7666,22 +7686,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Ekspor PDF - + PDF file File PDF - + Opening file failed Membuka file gagal - + Can't open file '%1' for writing. Tidak bisa membuka file ' % 1 ' untuk tulisan. @@ -7941,45 +7961,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Filetype tidak diketahui - - + + Cannot open unknown filetype: %1 Tidak dapat membuka jenis filetype yang tidak diketahui: % 1 - + Export failed Export failed - + Cannot save to unknown filetype: %1 Tidak dapat menyimpan ke jenis filetype yang tidak diketahui: % 1 - + Workbench failure Kegagalan workbench - + %1 % 1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8030,8 +8050,8 @@ Do you want to specify another directory? Mengekspor PDF... - + Unsaved document Dokumen yang belum disimpan @@ -8596,7 +8616,7 @@ Please open a browser window and type in: http://localhost:%1. Tidak dapat menemukan file % 1 tidak di % 2 maupun di % 3 - + Navigation styles Gaya navigasi @@ -8684,7 +8704,7 @@ Please open a browser window and type in: http://localhost:%1. Edit text - Edit text + Edit teks @@ -8897,8 +8917,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8914,192 +8934,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Tampilan pohon - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10032,8 +10047,8 @@ the current copy will be lost. Buat dokumen kosong baru - + Unnamed Tanpa nama @@ -12343,12 +12358,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12356,32 +12371,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12868,47 +12883,47 @@ display the splash screen Custom (%1px) - + Combo View Tampilan Kombo - + TreeView and PropertyView TreeView and PropertyView - + Preference Pack Name Preference Pack Name - + Tags Tags - + Apply Apply - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists File exists - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index 6c1f22b277..f1c827f346 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -117,7 +117,7 @@ Modifica - + Import Importa @@ -188,8 +188,8 @@ Posizionamento - + Transform Trasforma @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Imposta un colore casuale @@ -421,42 +421,42 @@ EditMode - + Default Predefinito - + The object will be edited using the mode defined internally to be the most appropriate for the object type L'oggetto verrà modificato usando la modalità definita internamente per essere il più appropriato per il tipo di oggetto - + Transform Trasforma - + The object will have its placement editable with the Std TransformManip command L'oggetto avrà il suo posizionamento modificabile con il comando Std TransformManip - + Cutting Taglio - + This edit mode is implemented as available but currently does not seem to be used by any object Questa modalità di modifica è disponibile, ma al momento non sembra essere utilizzata da nessun oggetto - + Color Colore - + The object will have the color of its individual faces editable with the Part FaceColors command L'oggetto avrà il colore delle singole facce modificabile con il comando Part FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Impostazioni telecamera - + Orientation Orientamento - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista corrente @@ -2457,72 +2457,72 @@ Specificare un'altra cartella. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Ripristina pagina '%1'... - + Resets the user settings for the page '%1' Ripristina le impostazioni utente per la pagina '%1' - + Reset group '%1'... Reimposta gruppo '%1'... - + Resets the user settings for the group '%1' Ripristina le impostazioni utente per il gruppo '%1' - + Reset all... Ripristina tutto... - + Resets the user settings entirely Ripristina completamente le impostazioni utente - + Clear user settings Cancella le impostazioni utente - + Do you want to clear all your user settings? Vuoi cancellare tutte le impostazioni utente? - + If you agree all your settings will be cleared. Se accetti, tutte le impostazioni verranno cancellate. - + Wrong parameter Parametro errato - + Restart required Riavvio richiesto - + You must restart FreeCAD for changes to take effect. È necessario riavviare FreeCAD perché le modifiche abbiano effetto. - + Restart now Riavvia ora - + Restart later Riavvia dopo @@ -2858,35 +2858,35 @@ in the corner -- in % of height/width of viewport nell'angolo -- in % di altezza/larghezza della vista - + Axis cross will be shown by default at file opening or creation Il sistema di assi sarà mostrato di default all'apertura o alla creazione del file - + Show axis cross by default Mostra di default il sistema di assi - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Il tempo necessario per l'ultima operazione e il conseguente frame rate verranno mostrati nell'angolo in basso a sinistra nei file aperti - + Show counter of frames per second Mostra contatore frame per secondo - + Rendering Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. La modifica di questa opzione richiede un riavvio dell'applicazione. - + Use software OpenGL Usa software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Usa OpenGL VBO (Vertex Buffer Object) - + Render cache Rendering accelerato - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2933,7 +2933,17 @@ diversi che vanno dalle anomalie grafiche ai bug crash della GPU. Ricordarsi di segnalare che questa impostazione è stata abilitata quando si cerca supporto sui forum di FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2950,92 +2960,92 @@ solo la cache nel nodo radice del grafico della scena. Questo offre la velocità ma la risposta più lenta a qualsiasi cambiamento di scena. - + Auto Auto - + Distributed Distribuita - + Centralized Centralizzata - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used Che tipo di anti-aliasing multisample è usato - + None Nessuno - + Line Smoothing Leviga linea - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Oggetti trasparenti: - + Render types of transparent objects Tipo di rendering degli oggetti trasparenti - + One pass Un passaggio - + Backface pass Passa per le facce nascoste - + Marker size: Dimensioni del marcatore: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Distanza tra gli occhi per le modalità stereo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3044,48 +3054,48 @@ Il valore specificato è un fattore che verrà moltiplicato per la dimensione del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. - + Backlight is enabled with the defined color La retroilluminazione è attivata con il colore definito - - + + Backlight color Colore di retroilluminazione - + Intensity Intensità - + Intensity of the backlight Intensità della retroilluminazione - + Camera type Tipo di camera - + Objects will appear in a perspective projection Gli oggetti appariranno in prospettiva - + Perspective renderin&g Vista in prospettiva - + Objects will be projected in orthographic projection Gli oggetti saranno proiettati in proiezione ortografica - + Or&thographic rendering Vista or&tografica @@ -3097,57 +3107,57 @@ del riquadro di delimitazione dell'oggetto 3D che è attualmente visualizzato. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Aprire un nuovo visualizzatore o riavviare %1 per applicare le modifiche all' Anti-Aliasing. @@ -4038,7 +4048,7 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigazione @@ -4124,68 +4134,78 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Colore - + Base color for all elements Colore di base per tutti gli elementi - + Rotation center indicator Indicatore centro rotazione - + Sphere size Dimensione della sfera - + Color and transparency Colore e trasparenza - + The size of the rotation center indicator La dimensione dell'indicatore del centro di rotazione - + The color of the rotation center indicator Il colore dell'indicatore del centro di rotazione - + 3D Navigation Navigazione 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Elenca le configurazioni dei pulsanti del mouse per ogni impostazione di navigazione selezionata. Seleziona un set e poi premi il pulsante per visualizzare le configurazioni indicate. - + Mouse... Mouse... - + Navigation settings set Impostazioni di navigazione - + Orbit style Stile orbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4196,136 +4216,136 @@ Giradischi: la parte sarà ruotata attorno all'asse z (con assi vincolati). Giradischi Libero: la parte sarà ruotata attorno all'asse z. - + Turntable Piatto - + Trackball Trackball - + Free Turntable Piatto Libero - + Rotation mode Modalità rotazione - + Rotations in 3D will use current cursor position as center for rotation Le rotazioni in 3D utilizzeranno la posizione corrente del cursore come centro per la rotazione - + Window center Centro finestra - + Drag at cursor Trascina al cursore - + Object center Centro oggetto - + Default camera orientation Orientamento predefinito della camera - + Default camera orientation when creating a new document or selecting the home view Orientamento predefinito della fotocamera quando si crea un nuovo documento o si seleziona la vista iniziale - + Camera zoom Zoom fotocamera - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Imposta lo zoom della fotocamera per i nuovi documenti. Il valore è il diametro della sfera da adattare allo schermo. - + mm mm - + Animations Animazioni - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Durata delle animazioni di navigazione che hanno una durata fissa - + Animation duration Durata animazione - + The duration of navigation animations in milliseconds La durata delle animazioni di navigazione in millisecondi - + Zoom step Passo zoom - + Zoom operations will be performed at position of mouse pointer Le operazioni di zoom verranno eseguite sulla posizione del puntatore del mouse - + Zoom at cursor Ingrandimento al cursore - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Quanto verrà ingrandito. Il passo di zoom di '1' significa un fattore di 7.5 per ogni fase di zoom. - + Direction of zoom operations will be inverted La direzione delle operazioni di zoom verrà invertita - + Invert zoom Inverti lo zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4334,57 +4354,57 @@ Interessa solo lo stile gesture. Questa impostazione non disabilitata l'inclinazione tramite mouse. - + Disable touchscreen tilt gesture Disattiva l'inclinazione dai gesti del touch screen - + Isometric Isometrica - + Dimetric Dimetrica - + Trimetric Trimetrica - + Top Dall'alto - + Front Di fronte - + Left Da sinistra - + Right Da destra - + Rear Da dietro - + Bottom Dal basso - + Custom Personalizza @@ -5640,7 +5660,7 @@ originariamente selezionati prima di aprire questa finestra Gui::DockWnd::PropertyDockView - + Property View Proprietà @@ -6105,15 +6125,15 @@ Si desidera salvare le modifiche? Formato PDF - + Graphviz format Formato Graphviz + - Export graph Esporta grafico @@ -6695,14 +6715,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Vista - - + + Data Dati @@ -7677,22 +7697,22 @@ Vuoi specificare un'altra cartella? Gui::View3DInventor - + Export PDF Esporta in formato PDF - + PDF file File PDF - + Opening file failed Apertura del file non riuscita - + Can't open file '%1' for writing. Impossibile aprire il file '%1' per la scrittura. @@ -7952,45 +7972,45 @@ Vuoi specificare un'altra cartella? Python - - - + + + Unknown filetype Tipo di file sconosciuto - - + + Cannot open unknown filetype: %1 Non è possibile aprire il tipo di file sconosciuto: %1 - + Export failed Esportazione fallita - + Cannot save to unknown filetype: %1 Non è possibile salvare il tipo di file sconosciuto: %1 - + Workbench failure Avaria ambiente - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Versione OpenGL Non Valida @@ -8041,8 +8061,8 @@ Vuoi specificare un'altra cartella? Esportazione PDF... - + Unsaved document Documento non salvato @@ -8612,7 +8632,7 @@ Aprire una finestra browser e scrivere http://localhost:%1. Impossibile trovare il file %1 nè in %2 nè in %3 - + Navigation styles Stile di navigazione @@ -8913,8 +8933,8 @@ la copia corrente andranno perse. Attiva/disattiva sovrapposizione - + Toggle floating window Attiva/disattiva finestra fluttuante @@ -8930,199 +8950,194 @@ la copia corrente andranno perse. Premi ESC per nascondere il suggerimento - + UI Interfaccia utente - + Tree view Struttura - + Item background color Colore di sfondo dell'elemento - + Item background padding Spaziatura sfondo elemento - + Resizable columns Colonne ridimensionabili - - Show item checkbox - Mostra casella di controllo elemento - - - + Hide extra column Nascondi colonna aggiuntiva - + Hide scroll bar Nascondi barra di scorrimento - + Hide header Nascondi intestazione - + IconSize Grandezza icona - + FontSize Grandezza font - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Controlla Cubo Di Navigazione - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Ritardo suggerimento (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Durata animazione (ms) - + Animation curve type Animation curve type Active object - Active object + Oggetto attivo @@ -10048,8 +10063,8 @@ la copia corrente andranno perse. Crea un documento vuoto - + Unnamed Senza nome @@ -12359,12 +12374,12 @@ dopo l'avvio di FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Cubo di navigazione mobile - + Drag and place NaviCube Trascina e posiziona il Cubo di navigazione @@ -12372,32 +12387,32 @@ dopo l'avvio di FreeCAD NaviCubeSettings - + FRONT AVANTI - + TOP SOPRA - + RIGHT DESTRA - + REAR DIETRO - + BOTTOM SOTTO - + LEFT SINISTRA @@ -12639,7 +12654,7 @@ dopo l'avvio di FreeCAD Default unit system: - Default unit system: + Sistema di unità predefinito: @@ -12884,47 +12899,47 @@ la schermata di avvio Personalizzato (%1px) - + Combo View Vista combinata - + TreeView and PropertyView Vista ad albero e proprietà - + Preference Pack Name Nome Pacchetto Preferenze - + Tags Etichette - + Apply Applica - + Apply the %1 preference pack Applica il pacchetto preferenze %1 - + Choose a FreeCAD config file to import Scegli un file di configurazione FreeCAD da importare - + File exists Il file esiste - + A preference pack with that name already exists. Overwrite? Esiste già un pacchetto di preferenze con quel nome. Vuoi sovrascriverlo? @@ -13645,7 +13660,7 @@ the region are non-opaque. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Mostra la vista proprietà, che visualizza le proprietà dell'oggetto selezionato. diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index 3abffda45a..8a6dfd4339 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -117,7 +117,7 @@ 編集 - + Import インポート @@ -188,8 +188,8 @@ 配置 - + Transform 変換 @@ -421,42 +421,42 @@ EditMode - + Default デフォルト - + The object will be edited using the mode defined internally to be the most appropriate for the object type オブジェクトは、オブジェクト型に最も適した、内部的に定義されたモードを使用して編集されます。 - + Transform 変換 - + The object will have its placement editable with the Std TransformManip command オブジェクトの配置は Std TransformManip コマンドで編集可能です。 - + Cutting 切断 - + This edit mode is implemented as available but currently does not seem to be used by any object この編集モードは利用可能な状態で実装されていますが、現在はどのオブジェクトでも使用されていないようです。 - + Color 色 - + The object will have the color of its individual faces editable with the Part FaceColors command オブジェクトはそれぞれの面の色を持ち、Part FaceColors コマンドで編集可能です。 @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings カメラ設定 - + Orientation 向き - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 現在のビュー @@ -2453,72 +2453,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings ユーザー設定をクリア - + Do you want to clear all your user settings? すべてのユーザー設定を消去しますか？ - + If you agree all your settings will be cleared. 同意した場合、全ての設定が消去されます。 - + Wrong parameter 間違ったパラメーター - + Restart required 再起動が必要です。 - + You must restart FreeCAD for changes to take effect. 変更を有効にするにはFreeCADを再起動する必要があります。 - + Restart now 今すぐ再起動 - + Restart later 後で再起動 @@ -2853,34 +2853,34 @@ in the corner -- in % of height/width of viewport 隅に配置されるメイン座標系表示のサイズ－ビューポートの高さ/幅に対するパーセント - + Axis cross will be shown by default at file opening or creation ファイルを開くまたは作成する際に、既定で交差軸が表示されます - + Show axis cross by default 既定で交差軸を表示 - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files 最後の操作に要した時間と結果表示のフレームレートが開かれたファイルの左下に表示されます。 - + Show counter of frames per second 1 秒あたりのフレーム数のカウンターを表示 - + Rendering レンダリング - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2889,22 +2889,22 @@ Changing this option requires a restart of the application. このオプションを変更するとアプリケーションの再起動が必要になります。 - + Use software OpenGL ソフトウェア OpenGL を使用 - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO（頂点バッファーオブジェクト）を使用 - + Render cache レンダリングのキャッシュ - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2921,7 +2921,17 @@ VBOはOpenGLの機能で、頂点データ (位置、法線ベクトル、色な 注意: この機能を使用すると描画の異常やGPUをクラッシュさせる不具合といった様々な問題が起きる場合があります。FreeCADフォーラムでサポートを受ける場合はこの設定を有効にしていることを忘れずに報告してください。 - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2936,92 +2946,92 @@ but slower response to any scene changes. 3) '集中' 全てのビュープロバイダーの全てのノードでのキャッシュを手動で無効にし、シーングラフのルートノードでのみキャッシュさせます。この設定を使うとレンダリング速度は最速になりますが、シーン変更での応答は遅くなります。 - + Auto 自動 - + Distributed 分散 - + Centralized 集中 - + Anti-Aliasing アンチエイリアス - + What kind of multisample anti-aliasing is used 使用されているマルチサンプル・アンチエイリアスの種類 - + None なし - + Line Smoothing 線を滑らかにする - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: 透明オブジェクト: - + Render types of transparent objects 透明オブジェクトのレンダータイプ - + One pass ワンパス - + Backface pass バックフェイスパス - + Marker size: マーカーサイズ: - + Size of vertices in the Sketcher, TechDraw and other workbenches スケッチャー、TechDraw、その他のワークベンチでの頂点のサイズ - + Eye to eye distance for stereo modes ステレオモードでの目と目の間の距離　 - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3029,48 +3039,48 @@ bounding box size of the 3D object that is currently displayed. 現在表示されている 3D オブジェクトのバウンディングボックスサイズと掛け合わされる係数の値を指定します。 - + Backlight is enabled with the defined color 定義された色でバックライトが有効になります。 - - + + Backlight color バックライトの色 - + Intensity 強度 - + Intensity of the backlight バックライトの強度 - + Camera type カメラの種類 - + Objects will appear in a perspective projection オブジェクトは透視投影で表示されます。 - + Perspective renderin&g 透視投影レンダリング(&g) - + Objects will be projected in orthographic projection オブジェクトは正投影で投影されます。 - + Or&thographic rendering 正射投影レンダリング(&t) @@ -3082,57 +3092,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing アンチエイリアス - + Open a new viewer or restart %1 to apply anti-aliasing changes. アンチ・エイリアスの変更を適用するには、新しいビューアーを開くまたは %1 を再起動してください。 @@ -4015,7 +4025,7 @@ John Doe <john@doe.com> 形式を使用することもできます。Gui::Dialog::DlgSettingsNavigation - + Navigation ナビゲーション @@ -4101,68 +4111,78 @@ John Doe <john@doe.com> 形式を使用することもできます。 + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color 色 - + Base color for all elements すべての要素の基本色 - + Rotation center indicator Rotation center indicator - + Sphere size 球のサイズ - + Color and transparency 色と透明度 - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation 3Dナビゲーション - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. 選択したナビゲーション設定ごとにマウスボタン設定をリスト表示。 設定を選択し、ボタンを押すとその設定が表示されます。 - + Mouse... マウス... - + Navigation settings set ナビゲーション設定 - + Orbit style 軌道スタイル - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4173,193 +4193,193 @@ Free Turntable: the part will be rotated around the z-axis. フリーターンテーブル: Z軸周りにオブジェクトを回転 - + Turntable ターンテーブル - + Trackball トラックボール - + Free Turntable フリーターンテーブル - + Rotation mode 回転モード - + Rotations in 3D will use current cursor position as center for rotation 3D回転では現在のカーソル位置が回転中心として使用されます。 - + Window center ウィンドウの中央 - + Drag at cursor カーソル位置にドラッグ - + Object center オブジェクトの中央 - + Default camera orientation デフォルトのカメラの向き - + Default camera orientation when creating a new document or selecting the home view 新しいドキュメントを作成、またはホームビューを選択した場合のデフォルトのカメラの向き - + Camera zoom カメラのズーム - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. 新しいドキュメントのカメラズームを設定。 値は画面にちょうど収まる球の直径。 - + mm mm - + Animations アニメーション - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step ズーム量 - + Zoom operations will be performed at position of mouse pointer ズーム操作はマウスポインタの位置で実行されます - + Zoom at cursor カーソルの位置にズーム - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. どの程度ズームを行うか。 ズーム量「1」はズーム 1 段階ごとに 7.5 倍することを意味します。 - + Direction of zoom operations will be inverted ズーム操作の方向を反転 - + Invert zoom ズームを反転 - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. ピンチズーム時のビューのチルトを防ぎます。ジェスチャーナビゲーションスタイルに対してのみ有効です。この設定ではマウスでのチルトは無効化されません。 - + Disable touchscreen tilt gesture タッチスクリーンのチルトジェスチャーを無効化 - + Isometric アイソメトリック - + Dimetric ダイメトリック - + Trimetric 不等角投影図法 - + Top 上面図 - + Front 正面図 - + Left 左面図 - + Right 右面図 - + Rear 背面図 - + Bottom 底面 - + Custom カスタム @@ -5615,7 +5635,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View プロパティ表示 @@ -6079,15 +6099,15 @@ Do you want to save your changes? PDF形式 - + Graphviz format Graphviz format + - Export graph グラフをエクスポート @@ -6667,14 +6687,14 @@ How do you want to proceed? Gui::PropertyView - - + + View ビュー - - + + Data データ @@ -6997,7 +7017,7 @@ Do you want to specify another directory? Position - 位置 + Position @@ -7648,22 +7668,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDFファイル形式でエクスポート - + PDF file PDFファイル - + Opening file failed ファイルを開けませんでした。 - + Can't open file '%1' for writing. 書き込み用ファイル '%1' を開くことができません。 @@ -7923,45 +7943,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype 不明なファイル形式 - - + + Cannot open unknown filetype: %1 %1：不明なファイルタイプを開くことができません。 - + Export failed エクスポート失敗 - + Cannot save to unknown filetype: %1 不明なファイル形式に保存できません: %1 - + Workbench failure ワークベンチのエラー - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8012,8 +8032,8 @@ Do you want to specify another directory? PDF ファイルをエクスポートしています - + Unsaved document 未保存のドキュメント @@ -8581,7 +8601,7 @@ Please open a browser window and type in: http://localhost:%1. %2 にも %3 にもファイル %1 が見つかりません。 - + Navigation styles ナビゲーションスタイル @@ -8877,8 +8897,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8894,192 +8914,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view ツリービュー - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10012,8 +10027,8 @@ the current copy will be lost. 新しい空のドキュメントを作成 - + Unnamed Unnamed @@ -12322,12 +12337,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube 移動可能なナビゲーションキューブ - + Drag and place NaviCube ナビゲーションキューブをドラッグして配置 @@ -12335,32 +12350,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT 前 - + TOP 上 - + RIGHT 右 - + REAR 後 - + BOTTOM 下 - + LEFT 左 @@ -12843,47 +12858,47 @@ display the splash screen カスタム（%1px） - + Combo View コンボビュー - + TreeView and PropertyView ツリービューとプロパティービュー - + Preference Pack Name ユーザー設定パック名 - + Tags タグ - + Apply 適用する - + Apply the %1 preference pack ユーザー設定パック %1 を適用 - + Choose a FreeCAD config file to import インポートするFreeCAD設定ファイルを選択してください。 - + File exists ファイルが存在します。 - + A preference pack with that name already exists. Overwrite? 同じ名前のユーザー設定パックが既に存在します。上書きしますか？ diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index 3b8ca25927..dac6b217af 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -117,7 +117,7 @@ ჩასწორება - + Import შემოტანა @@ -188,8 +188,8 @@ მდებარეობა - + Transform გარდაქმნა @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + შემთხვევითი ფერის დაყენება @@ -421,42 +421,42 @@ EditMode - + Default ნაგულისხმევი - + The object will be edited using the mode defined internally to be the most appropriate for the object type ობიექტი ჩასწორდება რეჟიმით, რომელიც შიგნით ამ ობიექტის ტიპისთვის ყველაზე შესაფერისია - + Transform გარდაქმნა - + The object will have its placement editable with the Std TransformManip command ობიექტს Std TransformManip ბრძანებით ჩასწორებადი მდებარეობა ექნება - + Cutting ამოჭრა - + This edit mode is implemented as available but currently does not seem to be used by any object ეს ჩასწორების რეჟიმი განხორციელებულია, როგორც ხელმისაწვდომი, მაგრამ ამჟამად, როგორც ჩანს, არც ერთი ობიექტის მიერ არ გამოიყენება - + Color ფერი - + The object will have the color of its individual faces editable with the Part FaceColors command ობიექტს თითოეული ზედაპირის Part FaceColors ბრძანებით ჩასწორებადი ფერი ექნება @@ -592,12 +592,12 @@ Press left mouse button - დააწექით მარცხენა თაგუნას ღილაკს + დააჭირეთ თაგუნის მარცხენა ღილაკს Press middle mouse button - დააწექით შუა თაგუნას ღილაკს + დააჭირეთ თაგუნის შუა ღილაკს @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings კამერის პარამეტრები - + Orientation ორიენტაცია - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view მიმდინარე ხედი @@ -1173,7 +1173,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Remove - წაშლა + მოცილება @@ -1884,7 +1884,7 @@ same time. The one with the highest priority will be triggered. Rename - გადარქმევა + სახელის გადარქმევა @@ -2444,7 +2444,7 @@ Specify another directory, please. Reset - დაბრუნება + საწყის მნიშვნელობებზე დაბრუნება @@ -2459,72 +2459,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... '%1-ე' გვერდის ჩამოყრა... - + Resets the user settings for the page '%1' ჩამოყრის მომხმარებლის პარამეტრებს გვერდისთვის '%1' - + Reset group '%1'... ჩამოყრა ჯგუფისთვის '%1'... - + Resets the user settings for the group '%1' ჩამოყრის მომხმარებლის პარამეტრებს ჯგუფისთვის '%1' - + Reset all... ყველას ჩამოყრა... - + Resets the user settings entirely მთლიანად ჩამოყრის მომხმარებლის პარამეტრებს - + Clear user settings მომხმარებლის არჩევნის გასუფთავება - + Do you want to clear all your user settings? გნებავთ ყველა თქვენი ცვლილების ნაგულისხმევ მნიშვნელობებზე დაბრუნება? - + If you agree all your settings will be cleared. თანხმობის შემთხვევაში თქვენს მიერ შეტანილი ცვლილებები გაბათილდება. - + Wrong parameter არასწორი პარამეტრი - + Restart required საჭიროა გადატვირთვა - + You must restart FreeCAD for changes to take effect. ამ ცვლილების გასააქტიურებლად გადატვირთეთ FreeCAD. - + Restart now ახლა გადატვირთვა - + Restart later მოგვიანებით გადატვირთვა @@ -2740,7 +2740,7 @@ Specify another directory, please. Reset - საწყის მნიშვნელობებზე დაბრუნება + დაბრუნება @@ -2791,7 +2791,7 @@ Specify another directory, please. TextLabel - ტექსტური ჭდე + ტექსტური წარწერა @@ -2861,34 +2861,34 @@ in the corner -- in % of height/width of viewport კუთხეში -- ხედის სიგრძე/სიგანის % - + Axis cross will be shown by default at file opening or creation ღერძების კვეთა ნაგულისხმევად იქნება ნაჩვენები ფაილის გახსნისას ან შექმნისას - + Show axis cross by default ღერძების კვეთის ყოველთვის ჩვენება - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files ბოლო ოპერაციისთვის საჭირო დრო და შედეგად მიღებული კადრების სიხშირე გახსნილ ფაილებში ნაჩვენები იქნება ქვედა მარცხენა კუთხეში - + Show counter of frames per second კადრი/წამში რაოდენობის ჩვენება - + Rendering მიმდინარეობს რენდერი - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. ამ პარამეტრის შეცვლა მოითხოვს აპლიკაციის გადატვირთვას. - + Use software OpenGL პროგრამული OpenGL-ის გამოყენება - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO-ს გამოყენება (Vertex Buffer Object) - + Render cache რენდერის კეში - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2931,7 +2931,17 @@ VBO-ს გააჩნია წარმადობის მნიშვნ პრობლემები დაწყებული გრაფიკული ანომალიებით დამთავრებული GPU-ის ავარიული შეცდომებით. დაიმახსოვრეთ, რომ ამ პარამეტრის ჩართულობის მოხსენიება FreeCAD-ის ფორუმზე დახმარების ძებნისას აუცილებელია - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2947,92 +2957,92 @@ but slower response to any scene changes. მხოლოდ ჩართეთ მხოლოდ სცენის გრაფიკის ძირეულ კვანძში. ეს გთავაზობთ რენდერის უსწრაფეს სიჩქარეს, მაგრამ სცენის ნებისმიერ ცვლილებაზე ნელი რეაგირების ხარჯზე. - + Auto ავტო - + Distributed განაწილებული - + Centralized ცენტრალიზებული - + Anti-Aliasing მომრგვალება - + What kind of multisample anti-aliasing is used მომრგვალების გამოყენებული ტიპი - + None არცერთი - + Line Smoothing ხაზის მომრგვალება - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: გამჭვირვალე ობიექტები: - + Render types of transparent objects გამჭვირვალე ობიექტების რენდერის ტიპები - + One pass ერთი გავლა - + Backface pass ფონის გავლა - + Marker size: ჭდის ზომა: - + Size of vertices in the Sketcher, TechDraw and other workbenches წვეროების ზომა ესკიზის, ტექნიკური ნახაზებისა და სხვა სამუშაო მაგიდებზე - + Eye to eye distance for stereo modes სტერეორეჟიმში თვალებს შორის დაშორება - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3041,48 +3051,48 @@ bounding box size of the 3D object that is currently displayed. ამჟამად ნაჩვენები 3D ობიექტის შემოსაზღვრული ყუთის ზომაზე. - + Backlight is enabled with the defined color ფონური სინათლე მითითებული ფერით ჩაირთო - - + + Backlight color განათების ფერი - + Intensity ინტენსივობა - + Intensity of the backlight გამოკვეთის ინტენსიურობა - + Camera type კამერის ტიპი - + Objects will appear in a perspective projection ობიექტები პერსპექტივაში გამოჩნდებიან - + Perspective renderin&g პერსპექტივის რენდერი - + Objects will be projected in orthographic projection ობიექტები ნაჩვენები იქნება ორთოგრაფიულ პროექციაში - + Or&thographic rendering ორ&თოგრაფიული რენდერი @@ -3094,57 +3104,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing მომრგვალება - + Open a new viewer or restart %1 to apply anti-aliasing changes. მომრგვალების გადასატარებლად %1 ან დაარესტარტეთ, ან გახსენით ახალ ფანჯარაში. @@ -4035,7 +4045,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation ნავიგაცია @@ -4121,68 +4131,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color ფერი - + Base color for all elements ყველა ელემენტის ძირითადი ფერი - + Rotation center indicator ბრუნვის ცენტრის მაჩვენებელი - + Sphere size სფეროს ზომა - + Color and transparency ფერი და გამჭვირვალობა - + The size of the rotation center indicator ბრუნვის ცენტრის მაჩვენებლის ზომა - + The color of the rotation center indicator ბრუნვის ცენტრის მაჩვენებლის ფერი - + 3D Navigation 3D ნავიგაცია - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. მაუსის ღილაკის კონფიგურაციების ჩამოთვლა არჩეული ნავიგაციის თითოეული პარამეტრისთვის. აირჩიეთ ნაკრები და შემდეგ დააჭირეთ ღილაკს აღნიშნული კონფიგურაციების სანახავად. - + Mouse... თაგუნა... - + Navigation settings set ნავიგაციის პარამეტრების ნაკრები - + Orbit style ტრიალის სტილი - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4193,136 +4213,136 @@ Free Turntable: the part will be rotated around the z-axis. თავისუფალი ბრუნავი დისკო: ნაწილი Z-ღერძის გარშემო შებრუნდება. - + Turntable გრუნტი - + Trackball ტრეკბოლი - + Free Turntable თავისუფალი გრუნტი - + Rotation mode ბრუნვის რეჟიმი - + Rotations in 3D will use current cursor position as center for rotation 3D-ში ბრუნვის დროს მობრუნების ცენტრი კურსორის მიმდინარე მდებარეობა იქნება - + Window center ფანჯრის ცენტრი - + Drag at cursor კურსორთან გადათრევა - + Object center ობიექტის ცენტრი - + Default camera orientation კამერის ნაგულისხმევი ორიენტაცია - + Default camera orientation when creating a new document or selecting the home view კამერის ნაგულისხმევი ორიენტაცია ახალი დოკუმენტის შექმნისას ან საწყისი ხედის არჩევისას - + Camera zoom კამერის გადიდება - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. აყენებს ახალი დოკუმენტების კამერის მასშტაბს. მნიშვნელობას წარმოადგენს სფეროს დიამეტრი, რომელიც ეკრანზე ეტევა. - + mm მმ - + Animations ანიმაციები - + Enable spinning animations that are used in some navigation styles after dragging ჩართავს ტრიალა ანიმაციებს, რომლებიც გამოიყენება ზოგიერთ ნავიგაციის სტილებში გადათრევის შემდეგ - + Enable spinning animations ტრიალა ანიმაციების ჩართვა - + Duration of navigation animations that have a fixed duration ნავიგაციის ანიმაციების ხანგრძლივობა, რომლებსაც ფიქსირებული ხანგრძლივობა გააჩნიათ - + Animation duration ანიმაციის ხანგრძლივობა - + The duration of navigation animations in milliseconds ნავიგაციის ანიმაციების ხანგრძლივობა მილიწამებში - + Zoom step გადიდების ბიჯი - + Zoom operations will be performed at position of mouse pointer გადიდების მოქმედება თაგუნას მაჩვენებლის პოზიციაზე მოხდება - + Zoom at cursor კურსორთან გადიდება - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. რამდენად შეიძლება გაადიდოთ. გადიდების ბიჯი 1 ნიშნავს 7,5-ჯერ გადიდებას ყოველ ბიჯზე. - + Direction of zoom operations will be inverted გადიდების ოპერაციების ინვერსია - + Invert zoom გადიდების ინვერსია - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4331,57 +4351,57 @@ Mouse tilting is not disabled by this setting. თაგუნათი დახრილობა ამ პარამეტრით არ არის ითიშება. - + Disable touchscreen tilt gesture სენსორული ეკრანის მისახვედრი ჟესტების გამორთვა - + Isometric იზომეტრიული - + Dimetric დიმეტრიული - + Trimetric ტრიმეტრიული - + Top თავზე - + Front წინ - + Left მარცხნივ - + Right მარჯვნივ - + Rear უკან - + Bottom ძირზე - + Custom ხელით @@ -4792,7 +4812,7 @@ The preference system is the one set in the general preferences. Placement - მდებარეობა + განლაგება @@ -5255,7 +5275,7 @@ The 'Status' column shows whether the document could be recovered. Placement - განლაგება + მდებარეობა @@ -5638,7 +5658,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View თვისებაზე გადახედვა @@ -6103,15 +6123,15 @@ Do you want to save your changes? PDF ფორმატი - + Graphviz format Graphviz-ის ფორმატი + - Export graph გრაფიკის გატანა @@ -6149,7 +6169,7 @@ Do you want to save your changes? Scroll middle mouse button - დაატრიალეთ შუა თაგუნას ღილაკი + დაატრიალეთ თაგუნის ბორბალი @@ -6694,14 +6714,14 @@ How do you want to proceed? Gui::PropertyView - - + + View ხედი - - + + Data მონაცემები @@ -7025,7 +7045,7 @@ Do you want to specify another directory? Position - მდებარეობა + Position @@ -7056,7 +7076,7 @@ Do you want to specify another directory? TextLabel - ტექსტური წარწერა + ტექსტური ჭდე @@ -7071,7 +7091,7 @@ Do you want to specify another directory? Remove - მოცილება + წაშლა @@ -7206,7 +7226,7 @@ Do you want to specify another directory? Press middle mouse button - დააჭირეთ თაგუნის შუა ღილაკს + დააწექით შუა თაგუნას ღილაკს @@ -7216,7 +7236,7 @@ Do you want to specify another directory? Scroll middle mouse button - დაატრიალეთ თაგუნის ბორბალი + დაატრიალეთ შუა თაგუნას ღილაკი @@ -7224,7 +7244,7 @@ Do you want to specify another directory? Press left mouse button - დააჭირეთ თაგუნის მარცხენა ღილაკს + დააწექით მარცხენა თაგუნას ღილაკს @@ -7562,7 +7582,7 @@ Do you want to specify another directory? Rename - სახელის გადარქმევა + გადარქმევა @@ -7676,22 +7696,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDF-ად გატანა - + PDF file PDF ფაილი - + Opening file failed ფაილის გახსნის შეცდომა - + Can't open file '%1' for writing. ფაილის ჩასაწერად გახსნა შეუძლებელია. @@ -7951,45 +7971,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype ფაილის უცნობი ტიპი - - + + Cannot open unknown filetype: %1 ფაილის უცნობი ტიპი: %1 - + Export failed გატანის შეცდომა - + Cannot save to unknown filetype: %1 უცნობ ფაილის ტიპში ჩაწერის შეცდომა: %1 - + Workbench failure სამუშაო მაგიდის შეცდომა - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. თქვენს სისტემაზე გაშვებული OpenGL-ის ვერსიაა %1.%2. FreeCAD-ს სამუშაოდ OpenGL 2.0 ან უფრო მაღალი სჭირდება. განაახლეთ საჭიროებისამებრ თქვენი ვიდეობარათის დრაივერი ან/და თვითონ ბარათი. - + Invalid OpenGL Version არასწორი OpenGL-ის ვერსია @@ -8040,8 +8060,8 @@ Do you want to specify another directory? PDF-ად გატანა... - + Unsaved document შეუნახავი დოკუმენტი @@ -8611,7 +8631,7 @@ Please open a browser window and type in: http://localhost:%1. ვერ ვიპოვე ფაილი %1, ვერც %2 და ვერც %3 - + Navigation styles ნავიგაციის სტილები @@ -8911,8 +8931,8 @@ the current copy will be lost. განლაგების გადართვა - + Toggle floating window მცურავი ფანჯრის გადართვა @@ -8928,199 +8948,194 @@ the current copy will be lost. მინიშნების დამალვისთვის დააწექით ESC ღილაკს - + UI ინტერფეისი - + Tree view ელემენტების ხე - + Item background color ელემენტის ფონის ფერი - + Item background padding ელემენტის ფონის შევსება - + Resizable columns ზომაცვლადი სვეტები - - Show item checkbox - ელემენტის ჩამრთველის ჩვენება - - - + Hide extra column დამატებითი სვეტის დამალვა - + Hide scroll bar ჩოჩიის პანელის დამალვა - + Hide header თავსართის დამალვა - + IconSize ხატულის ზომა - + FontSize ფონტის ზომა - + ItemSpacing ელემენტებისდაშორება - + Overlay განლაგება - + Hide tab bar ჩანართების პანელის დამალვა - + Hide property view scroll bar თვისებების ხედის ჩოჩიის დამალვა - + Auto hide in non 3D view ავტომატური დამალვა არა-3D ხედში - + Auto mouse pass through ავტომატური თაგუნას გამჭოლი გავლა - + Auto mouse wheel pass through ავტომატური თაგუნას ბორბლით გამჭოლი გავლა - + Delay mouse wheel pass through (ms) ავტომატური თაგუნას ბორბლით გამჭოლი გავლის დაყოვნება (მწმ) - + Alpha test radius ალფას ტესტის რადიუსი - + Check Navigation Cube ნავიგაციის კუბის შემოწმება - + Hint trigger size მინიშნების ტრიგერის ზომა - + Hint width მინიშნების სიგანე - + Left panel hint offset მარცხენა პანელის მინიშნების წანაცვლება - + Left panel hint length მარცხენა პანელის მინიშნების სიგრძე - + Right panel hint offset მარჯვენა პანელის მინიშნების წანაცვლება - + Right panel hint length მარჯვენა პანელის მინიშნების სიგრძე - + Top panel hint offset ზედა პანელის მინიშნების წანაცვლება - + Top panel hint length ზედა პანელის მინიშნების სიგრძე - + Bottom panel hint offset ქვედა პანელის მინიშნების წანაცვლება - + Bottom panel hint length ქვედა პანელის მინიშნების სიგრძე - + Hint show tab bar მინიშნების ჩვენება ჩანართების პანელზე - + Hint delay (ms) მინიშნების დაყოვნება (მწმ) - + Splitter auto hide delay (ms) გამყოფის ავტოდამალვის დაყოვნება (მწმ) - + Activate on hover გააქტიურება გადატარებისას - + Layout delay (ms) განლაგების დაყოვნება (მწმ) - + Animation duration (ms) ანიმაციის ხანგრძლივობა (მწმ) - + Animation curve type ანიმაციის მრუდის ტიპი Active object - Active object + აქტიური ობიექტი @@ -10046,8 +10061,8 @@ the current copy will be lost. ახალი ცარიელი პროექტის შექმნა - + Unnamed უსახელო @@ -11229,7 +11244,7 @@ It is meant to arrange objects that have a Part TopoShape, like Part Primitives, Fullscreen - მთელ ეკრანზე + მთლიან ეკრანზე ჩვენების რეჟიმი @@ -11475,7 +11490,7 @@ It is meant to arrange objects that have a Part TopoShape, like Part Primitives, Fullscreen - მთლიან ეკრანზე ჩვენების რეჟიმი + მთელ ეკრანზე @@ -12121,17 +12136,17 @@ FreeCAD-ის გაშვების შემდეგ XY-Plane - XY-Plane + XY-სიბრტყე XZ-Plane - XZ-Plane + XZ-სიბრტყე YZ-Plane - YZ-Plane + YZ-სიბრტყე @@ -12141,7 +12156,7 @@ FreeCAD-ის გაშვების შემდეგ Offset: - Offset: + წანაცვლება: @@ -12356,12 +12371,12 @@ FreeCAD-ის გაშვების შემდეგ NaviCubeDraggableCmd - + Movable navigation cube მოძრავი ნავიგაციის კუბი - + Drag and place NaviCube გადაათრიეთ და მოათავსეთ ნავიგაციის კუბი @@ -12369,32 +12384,32 @@ FreeCAD-ის გაშვების შემდეგ NaviCubeSettings - + FRONT წინა - + TOP თავზე - + RIGHT მარჯვენა - + REAR უკანა - + BOTTOM ფსკერი - + LEFT მარცხენა @@ -12636,7 +12651,7 @@ FreeCAD-ის გაშვების შემდეგ Default unit system: - Default unit system: + ნაგულისხმევი ერთეულების სისტემა: @@ -12879,47 +12894,47 @@ display the splash screen მომხმარებლის(%1px) - + Combo View კომბო ხედი - + TreeView and PropertyView TreeView და PropertyView - + Preference Pack Name პარამეტრების პაკეტის სახელი - + Tags ჭდეები - + Apply დადება - + Apply the %1 preference pack პარამეტრების ნაკრების გადატარება: %1 - + Choose a FreeCAD config file to import აირჩიეთ შემოსატანი FreeCAD-ის კონფიგურაციის ფაილი - + File exists ფაილი არსებობს - + A preference pack with that name already exists. Overwrite? პარამეტრების ნაკრები ამ სახელით უკვე არსებობს. გნებავთ, თავზე გადააწეროთ? @@ -13636,7 +13651,7 @@ the region are non-opaque. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + თვისების ხედის ჩვენება, რომელიც მონიშნული ობიექტის თვისებებს აჩვენებს. diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 290aec3a6d..c161c07447 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -118,7 +118,7 @@ 편집 - + Import 가져오기 @@ -189,8 +189,8 @@ 위치 설정 - + Transform 변환하기 @@ -422,42 +422,42 @@ EditMode - + Default 기본값 - + The object will be edited using the mode defined internally to be the most appropriate for the object type 객체 유형에 가장 적합하도록 내부적으로 정의된 모드를 사용하여 객체를 편집합니다. - + Transform 변환하기 - + The object will have its placement editable with the Std TransformManip command 대상물이 변위 명령을 입력할 수 있는 상태로 될 것 입니다 - + Cutting 절단 - + This edit mode is implemented as available but currently does not seem to be used by any object 현 편집 모드는 사용할 수 있는 기능이고, 현재 사용중인 대상물이 없는 것으로 보입니다 - + Color 색상 - + The object will have the color of its individual faces editable with the Part FaceColors command 객체는 Part FaceColors 명령으로 개별 면의 색상을 편집할 수 있습니다. @@ -789,37 +789,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 카메라 설정 - + Orientation Orientation - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 현재 보기 @@ -2457,72 +2457,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings 사용자 지정 설정 지우기 - + Do you want to clear all your user settings? 모든 사용자 설정을 지우기 원하나요? - + If you agree all your settings will be cleared. 동의하면 모든 사용자 설정이 지워집니다. - + Wrong parameter 잘못 된 파라미터 - + Restart required 재시작 필요 - + You must restart FreeCAD for changes to take effect. FreeCAD를 재시작 해야 변경사항이 적용됩니다 - + Restart now 지금 재시작 - + Restart later 재시작은 나중에 @@ -2859,36 +2859,36 @@ in the corner -- in % of height/width of viewport 모서리 - 뷰포트 높이/폭의 % 단위 - + Axis cross will be shown by default at file opening or creation 파일을 열거나 생성할 때 기본적으로 축 교차가 표시됩니다 - + Show axis cross by default 기본값으로 축 교차 표시하기 - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files 마지막 작업에 필요한 시간과 결과 프레임 속도는 열린 파일의 왼쪽 하단 모서리에 표시됩니다 - + Show counter of frames per second 초당 프레임 카운터를 표시 - + Rendering 렌더링 - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. 이 옵션을 변경하려면 응용 프로그램을 다시 시작해야 합니다. - + Use software OpenGL 소프트웨어 OpenGL 사용하기 - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO 사용(버텍스 버퍼 객체) - + Render cache 캐시 렌더링하기 - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ VBO는 데이터가 시스템 메모리가 아닌 그래픽 메모리에 상주 이 설정을 활성화된 것으로 보고하는 것을 잊지 마십시오 - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ but slower response to any scene changes. 가장 빠르지만 장면 변경에 대한 응답은 느립니다. - + Auto 자동 - + Distributed 분산됨 - + Centralized 집중됨 - + Anti-Aliasing 앤티 앨리어싱 - + What kind of multisample anti-aliasing is used 사용되는 다중샘플 앤티에일리어싱의 종류 - + None 없음 - + Line Smoothing 선 평활화 - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: 투명한 객체: - + Render types of transparent objects 투명한 객체의 렌더링 유형 - + One pass 하나의 패스 - + Backface pass 배면 패스 - + Marker size: 마커 크기 - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes 입체 모드에 적용된 눈과 눈 사이의 거리 - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ bounding box size of the 3D object that is currently displayed. 곱할 인수입니다. - + Backlight is enabled with the defined color 정의된 색상으로 백라이트가 활성화됩니다 - - + + Backlight color 백라이트 색상 - + Intensity 강도 - + Intensity of the backlight 백라이트의 강도 - + Camera type 카메라 유형 - + Objects will appear in a perspective projection 객체가 투시도면에 나타납니다. - + Perspective renderin&g 투시 렌더링(&G) - + Objects will be projected in orthographic projection 객체는 직교 투영으로 투영됩니다 - + Or&thographic rendering 직교 렌더링(&T) @@ -3098,57 +3108,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing 앤티얼라이징 - + Open a new viewer or restart %1 to apply anti-aliasing changes. 새 뷰어를 열거나 %1을(를) 다시 시작하여 앤티에일리어싱 변경 내용을 적용합니다. @@ -4038,7 +4048,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation 탐색 @@ -4124,68 +4134,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color 색상 - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation 3D 탐색 - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. 선택한 각 탐색 설정에 대한 마우스 버튼 구성을 나열합니다. 세트를 선택한 다음 단추를 누르면 해당 구성이 표시됩니다. - + Mouse... 마우스... - + Navigation settings set 탐색 설정 설정하기 - + Orbit style 궤도 스타일 - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4196,136 +4216,136 @@ Free Turntable: the part will be rotated around the z-axis. 자유 턴테이블: 대상물이 x축에 대해 회전 하게됨. - + Turntable 턴테이블 - + Trackball 트랙볼 - + Free Turntable Free Turntable - + Rotation mode 회전 모드 - + Rotations in 3D will use current cursor position as center for rotation 3D 회전은 현재 커서 위치를 회전 중심으로 사용합니다 - + Window center 창 중앙 - + Drag at cursor 커서에서 드래그 - + Object center 객체 중심 - + Default camera orientation 기본 카메라 방향 - + Default camera orientation when creating a new document or selecting the home view 새 문서를 만들거나 홈 보기를 선택할 때의 기본 카메라 방향 - + Camera zoom 카메라 줌 - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. 새 문서에 대한 카메라 줌을 설정합니다. 값은 화면에 맞출 구체의 지름입니다. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer 확대/축소 작업은 마우스 포인터 위치에서 수행됩니다 - + Zoom at cursor 커서에서 확대/축소하기 - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. 얼마나 확대/축소되는지 여부. '1'의 확대/축소 단계는 모든 확대/축소 단계에 대해 7.5의 계수를 의미합니다. - + Direction of zoom operations will be inverted 확대/축소 작업의 방향이 반전됩니다 - + Invert zoom 확대/축소 반전하기 - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4334,57 +4354,57 @@ Mouse tilting is not disabled by this setting. 이 설정에 의해 마우스 기울기가 비활성화되지 않습니다. - + Disable touchscreen tilt gesture 터치스크린 틸트 제스처 비활성화하기 - + Isometric 아이소메트릭 - + Dimetric 디메트릭 - + Trimetric 트라이메트릭 - + Top 평면 - + Front 정면 - + Left 좌측면 - + Right 우측면 - + Rear 배면 - + Bottom 저면 - + Custom 색상 편집 @@ -5640,7 +5660,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View 속성 보기 @@ -6105,15 +6125,15 @@ Do you want to save your changes? PDF형식 - + Graphviz format Graphviz format + - Export graph 그래프 내보내기 @@ -6696,14 +6716,14 @@ How do you want to proceed? Gui::PropertyView - - + + View 보기 - - + + Data 데이터 @@ -7677,22 +7697,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF PDF로 내보내기 - + PDF file PDF 파일 - + Opening file failed 파일 열기 실패 - + Can't open file '%1' for writing. 쓰기에 사용할 '%1' 파일을 열 수 없습니다. @@ -7952,45 +7972,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype 알 수 없는 파일유형 - - + + Cannot open unknown filetype: %1 알 수 없는 파일유형을 열 수 없습니다: %1 - + Export failed 내보내기 실패 - + Cannot save to unknown filetype: %1 알 수 없는 파일유형에 저장할 수 없습니다. %1 - + Workbench failure 워크벤치 실패 - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8041,8 +8061,8 @@ Do you want to specify another directory? PDF로 내보내기... - + Unsaved document 저장하지 않은 문서 @@ -8610,7 +8630,7 @@ Please open a browser window and type in: http://localhost:%1. %2 또는 %3에서 %1 파일을 찾을 수 없습니다 - + Navigation styles 탐색 스타일 @@ -8907,8 +8927,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8924,192 +8944,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view 트리 보기 - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10042,8 +10057,8 @@ the current copy will be lost. 비어 있는 새 문서 만들기 - + Unnamed 이름없음 @@ -12350,12 +12365,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12363,32 +12378,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12871,47 +12886,47 @@ display the splash screen 커스텀(%1px) - + Combo View 콤보 보기 - + TreeView and PropertyView 트리보기 및 속성보기 - + Preference Pack Name 환경설정 팩 이름 - + Tags 태그 - + Apply 적용 - + Apply the %1 preference pack %1 환경설정 팩 적용하기 - + Choose a FreeCAD config file to import 가져올 FreeCAD 구성 파일 고르기 - + File exists 파일이 존재합니다 - + A preference pack with that name already exists. Overwrite? 해당 이름의 환경설정 팩이 이미 있습니다. 덮어쓰시겠습니까? diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 3e5a794454..7a09582757 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -117,7 +117,7 @@ Bewerken - + Import Importeren @@ -188,8 +188,8 @@ Plaatsing - + Transform Transformeren @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Willekeurige kleur instellen @@ -421,42 +421,42 @@ EditMode - + Default Standaard - + The object will be edited using the mode defined internally to be the most appropriate for the object type Het object zal worden bewerkt met behulp van de intern gedefinieerde modus die het meest geschikt is voor dit type object - + Transform Transformeren - + The object will have its placement editable with the Std TransformManip command De plaatsing van het object kan worden bewerkt met de Std TransformManip opdracht - + Cutting Snijden - + This edit mode is implemented as available but currently does not seem to be used by any object Deze bewerkingsmodus is geïmplementeerd zoals nu beschikbaar maar lijkt momenteel niet te worden gebruikt door een object - + Color Kleur - + The object will have the color of its individual faces editable with the Part FaceColors command De kleur van de individuele vlakken van het object kunnen worden bewerkt met de opdracht Part FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Camera-instellingen - + Orientation Orientatie - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Huidige weergave @@ -867,7 +867,7 @@ while doing a left or right click and move the mouse up or down View - Weergave + Aanzicht @@ -1484,7 +1484,7 @@ same time. The one with the highest priority will be triggered. Command - Opdracht + Commando @@ -2101,7 +2101,7 @@ Misschien een fout met bestandsrechten? Close - Afsluiten + Sluiten @@ -2333,7 +2333,7 @@ Kies een andere map, alstublieft. Group - Groeperen + Groep @@ -2455,72 +2455,72 @@ Kies een andere map, alstublieft. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset tab '%1'... - + Resets the user settings for the page '%1' Reset de gebruikers voorkeuren van het tabblad '%1' - + Reset group '%1'... Reset groep '%1'... - + Resets the user settings for the group '%1' Reset de gebruikers voorkeuren van de groep '%1' - + Reset all... Reset alles... - + Resets the user settings entirely Reset alle gebruikers voorkeuren - + Clear user settings Gebruikersinstellingen wissen - + Do you want to clear all your user settings? Wilt u alle uw gebruikersinstellingen wissen? - + If you agree all your settings will be cleared. Als u akkoord gaat zullen alle uw instellingen worden gewist. - + Wrong parameter Verkeerde parameter - + Restart required Opnieuw opstarten vereist - + You must restart FreeCAD for changes to take effect. U moet FreeCAD herstarten om de wijzigingen toe te passen. - + Restart now Nu opnieuw opstarten - + Restart later Later opnieuw opstarten @@ -2856,36 +2856,36 @@ in the corner -- in % of height/width of viewport Relatieve grootte van het coördinatenstelsel, weergegeven in de hoek, -- in % van de hoogte/breedte van de weergave - + Axis cross will be shown by default at file opening or creation Assenkruis wordt standaard getoond het openen of aanmaken van bestand - + Show axis cross by default Toon assenkruis standaard - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files De tijd die nodig is voor de laatste bewerking en de resulterende framerate worden in geopende bestanden linksonder getoond - + Show counter of frames per second Toon teller van frames per seconde - + Rendering Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2894,22 +2894,22 @@ Changing this option requires a restart of the application. Het wijzigen van deze optie vereist een herstart van de toepassing. - + Use software OpenGL Gebruik software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Gebruik OpenGL VBO (Vertex Buffer Object) - + Render cache Cache renderen - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2927,7 +2927,17 @@ VBO's bieden aanzienlijke prestatiewinst omdat de gegevens in het grafische gehe Opmerking: Soms kan deze functie leiden tot een scala van verschillende problemen, van grafische afwijkingen tot GPU crash bugs. Vergeet niet om deze instelling als -ingeschakeld- te rapporteren, bij het zoeken naar ondersteuning op de FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2942,92 +2952,92 @@ Er zijn 3 opties beschikbaar om dit te bereiken: 3) 'Gecentraliseerd', schakel handmatig de cache uit in alle ´weergave nodes van elke voorziening´, en cache alleen op de ´scene beeld root node´. Dit biedt de hoogste rendersnelheid, maar een langzamere reactie op eventuele veranderingen in de scene. - + Auto Automatisch - + Distributed Verspreid - + Centralized Gecentraliseerd - + Anti-Aliasing Anti-aliasing - + What kind of multisample anti-aliasing is used Wat voor soort multisample anti-aliasing wordt gebruikt - + None Geen - + Line Smoothing Lijn vloeiend maken - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Transparante objecten: - + Render types of transparent objects Type transparante objecten renderen - + One pass Een passage - + Backface pass Passage op de achterkant - + Marker size: Markergrootte: - + Size of vertices in the Sketcher, TechDraw and other workbenches Grootte van de hoekpunten in de werkbanken Sketcher en TechDraw en in andere werkbanken - + Eye to eye distance for stereo modes Oog-naar-oog-afstand voor stereomodi - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3036,48 +3046,48 @@ De opgegeven waarde is een factor die zal worden vermenigvuldigd met de begrenzingsvakgrootte van het 3D-object dat op dat moment wordt weergegeven. - + Backlight is enabled with the defined color Tegenlicht is ingeschakeld met de ingestelde kleur - - + + Backlight color Tegenlichtkleur - + Intensity Intensiteit - + Intensity of the backlight Intensiteit van het tegenlicht - + Camera type Cameratype - + Objects will appear in a perspective projection Objecten verschijnen in een perspectiefprojectie - + Perspective renderin&g Perspectief renderin&g - + Objects will be projected in orthographic projection Objecten zullen geprojecteerd worden in orthografische projectie - + Or&thographic rendering Or&thografische weergave @@ -3089,57 +3099,57 @@ de begrenzingsvakgrootte van het 3D-object dat op dat moment wordt weergegeven.< Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Open een nieuwe viewer of %1 herstart om anti-aliasing wijzigingen toepassen. @@ -4026,7 +4036,7 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigatie @@ -4112,68 +4122,78 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Kleur - + Base color for all elements Basiskleur voor alle elementen - + Rotation center indicator Rotatiemiddelpunt indicator - + Sphere size Bol grootte - + Color and transparency Kleur en transparantie - + The size of the rotation center indicator De grootte van de rotatiemiddelpunt indicator - + The color of the rotation center indicator De kleur van de rotatiemiddelpunt indicator - + 3D Navigation 3D-navigatie - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Geef een lijst met de configuratie van de muisknop voor elke gekozen navigatie-instelling. Selecteer een set en druk vervolgens op de knop om deze configuraties te bekijken. - + Mouse... Muis... - + Navigation settings set Navigatie voorkeuren ingesteld - + Orbit style Rotatiebaan stijl - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4184,136 +4204,136 @@ Draaitafel: het object wordt rond de z-as gedraaid (met beperkte assen). Vrije draaitafel: het object zal worden gedraaid rond de z-as. - + Turntable Draaitafel - + Trackball Trackball - + Free Turntable Vrije draaitafel - + Rotation mode Draai modus - + Rotations in 3D will use current cursor position as center for rotation Rotaties in 3D zullen de huidige cursorpositie als middelpunt voor de rotatie gebruiken - + Window center Venster midden - + Drag at cursor Sleep bij cursor - + Object center Object midden - + Default camera orientation Standaard cameraoriëntatie - + Default camera orientation when creating a new document or selecting the home view Standaard cameraoriëntatie bij het aanmaken van een nieuw document of het selecteren van het startscherm - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Stelt de camerazoom in voor nieuwe documenten. De waarde is de diameter van de bol die op het scherm past. - + mm mm - + Animations Animaties - + Enable spinning animations that are used in some navigation styles after dragging Activeer ronddraaiende animaties die in sommige navigatiestijlen worden gebruikt na het slepen - + Enable spinning animations Activeer ronddraaiende animaties - + Duration of navigation animations that have a fixed duration Tijdsduur van de navigatie animaties met een vaste duur - + Animation duration Duur van de animatie - + The duration of navigation animations in milliseconds De tijdsduur van de navigatie animaties in milliseconden - + Zoom step Zoomstap - + Zoom operations will be performed at position of mouse pointer Zoombewerkingen worden uitgevoerd bij de positie van de muisaanwijzer - + Zoom at cursor Inzoomen bij cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Hoeveel er ingezoomd zal worden. Zoomstap van '1' betekent een factor 7,5 voor elke zoomstap. - + Direction of zoom operations will be inverted Richting van zoombewerkingen zullen omgedraaid worden - + Invert zoom Zoom omkeren - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4322,57 +4342,57 @@ Beïnvloedt alleen navigatie met gebaren. Kantelen met de muis wordt niet uitgeschakeld door deze instelling. - + Disable touchscreen tilt gesture Touchscreen kantel gebaar uitschakelen - + Isometric Isometrisch - + Dimetric Dimetrisch - + Trimetric Trimetrisch - + Top Boven - + Front Voorkant - + Left Links - + Right Rechts - + Rear Achter - + Bottom Onder - + Custom Eigen @@ -4387,7 +4407,7 @@ Kantelen met de muis wordt niet uitgeschakeld door deze instelling. Console - Console + Console @@ -4439,12 +4459,12 @@ horizontale ruimte in de Python-console overschrijden Path to external Python executable (optional): - Path to external Python executable (optional): + Pad naar externe Python executable (optioneel): Used for package installation with pip and debugging with debugpy. Autodetected if needed and not specified. - Used for package installation with pip and debugging with debugpy. Autodetected if needed and not specified. + Wordt gebruikt voor pakket installatie met -pip- en debugging met -debugpy-. Autodetected indien nodig en nog niet gespecificeerd. @@ -4538,7 +4558,7 @@ Larger value eases to pick things, but can make small features impossible to sel Simple color - Eenvoudige kleur + Enkelvoudige kleur @@ -4760,7 +4780,7 @@ Het voorkeurssysteem is het systeem dat in de algemene voorkeuren is ingesteld.< Close - Sluiten + Afsluiten @@ -5403,7 +5423,7 @@ The 'Status' column shows whether the document could be recovered. Command - Commando + Opdracht @@ -5625,7 +5645,7 @@ oorspronkelijk geselecteerd voorafgaand aan het openen van dit dialoogvenster Gui::DockWnd::PropertyDockView - + Property View Eigenschap weergave @@ -6088,15 +6108,15 @@ Wilt u uw wijzigingen opslaan? PDF formaat - + Graphviz format Graphviz format + - Export graph Grafiek exporteren @@ -6678,14 +6698,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Weergave - - + + Data Gegevens @@ -7497,7 +7517,7 @@ Wilt u een andere map opgeven? Group - Groep + Groeperen @@ -7657,22 +7677,22 @@ Wilt u een andere map opgeven? Gui::View3DInventor - + Export PDF Exporteren als PDF - + PDF file PDF-bestand - + Opening file failed Bestand openen mislukt - + Can't open file '%1' for writing. Kan bestand '%1' niet openen om te schrijven. @@ -7932,45 +7952,45 @@ Wilt u een andere map opgeven? Python - - - + + + Unknown filetype Onbekend bestandstype - - + + Cannot open unknown filetype: %1 Kan onbekende bestandstype niet openen: %1 - + Export failed Exporteren mislukt - + Cannot save to unknown filetype: %1 Kan onbekende bestandstype niet opslaan: %1 - + Workbench failure Werkbank falen - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Dit systeem draait OpenGL %1.%2. FreeCAD vereist OpenGL 2.0 of hoger. Upgrade uw grafische stuurprogramma en/of grafische kaart indien nodig. - + Invalid OpenGL Version Verkeerde OpenGL versie @@ -8021,8 +8041,8 @@ Wilt u een andere map opgeven? Exporteren van PDF ... - + Unsaved document Niet-opgeslagen document @@ -8590,7 +8610,7 @@ Open een browservenster en typ: http://localhost:%1. Kan bestand %1 niet vinden noch in %2, noch in %3 - + Navigation styles Navigatie stijlen @@ -8887,8 +8907,8 @@ de huidige kopie verloren gaat. Schakel scherm zichtbaarheid in/uit - + Toggle floating window Zet zwevend venster aan/uit @@ -8904,192 +8924,187 @@ de huidige kopie verloren gaat. Druk op ESC om hint te verbergen - + UI Gebruikers interface - + Tree view Boomstructuurweergave - + Item background color - Item background color + Achtergrondkleur van de items + + + + Item background padding + Achtergrond opvulling van een item + + + + Resizable columns + Aanpasbare kolommen + + + + Hide extra column + Verberg extra boomstructuurweergave kolom + + + + Hide scroll bar + Verberg de boomstructuurweergave schuifbalk - Item background padding - Item background padding + Hide header + Verberg de boomstructuurweergave koptekst - - Resizable columns - Resizable columns + + IconSize + Pictogram grootte - Show item checkbox - Show item checkbox - - - - Hide extra column - Hide extra column - - - - Hide scroll bar - Hide scroll bar - - - - Hide header - Hide header - - - - IconSize - IconSize - - - FontSize - FontSize + Lettergrootte - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -9211,7 +9226,7 @@ de huidige kopie verloren gaat. Toggle axis cross - Schakel assenkruis + Assenkruis zichtbaar aan/uit @@ -10022,8 +10037,8 @@ de huidige kopie verloren gaat. Maak een nieuw leeg document - + Unnamed Naamloos @@ -11677,7 +11692,7 @@ Wilt u toch doorgaan? Tree view item background. Only effective in overlay. - Structuurweergave item achtergrond. Alleen effectief in overlay. + Boomstructuurweergave item achtergrond. Alleen effectief in overlay. @@ -11692,12 +11707,12 @@ Wilt u toch doorgaan? Hide tree view scroll bar in dock overlay. - Verberg structuurweergave schuifbalk in dock overlay. + Verberg boomstructuurweergave schuifbalk in dock overlay. Hide tree view header view in dock overlay. - Verberg structuurweergave kop in dock overlay. + Verberg boomstructuurweergave kop in dock overlay. @@ -11810,7 +11825,7 @@ Wilt u toch doorgaan? View - Aanzicht + Weergave @@ -12332,12 +12347,12 @@ nadat FreeCAD opgestart is NaviCubeDraggableCmd - + Movable navigation cube Verplaatsbare navigatie kubus - + Drag and place NaviCube Sleep en plaats NaviCube @@ -12345,32 +12360,32 @@ nadat FreeCAD opgestart is NaviCubeSettings - + FRONT VOORZIJDE - + TOP BOVEN - + RIGHT RECHTS - + REAR ACHTERZIJDE - + BOTTOM BODEM - + LEFT LINKS @@ -12854,47 +12869,47 @@ het splashscherm weergeven Aangepaste (%1px) - + Combo View Combi-weergave - + TreeView and PropertyView Structuur- en Eigenschapsweergave - + Preference Pack Name Naam van het voorkeuren pakket - + Tags Labels - + Apply Toepassen - + Apply the %1 preference pack %1 voorkeurspakket toepassen - + Choose a FreeCAD config file to import Kies een FreeCAD configuratiebestand om te importeren - + File exists Bestand bestaat - + A preference pack with that name already exists. Overwrite? Een voorkeurspakket met deze naam bestaat al. Overschrijven? diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 78dc2825c6..2ee1304142 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -117,7 +117,7 @@ Edycja - + Import Importuj @@ -188,8 +188,8 @@ Umiejscowienie - + Transform Przemieszczenie @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Ustaw kolor losowo @@ -421,42 +421,42 @@ EditMode - + Default - Domyślnie + Domyślny - + The object will be edited using the mode defined internally to be the most appropriate for the object type Obiekt będzie edytowany przy użyciu trybu zdefiniowanego wewnętrznie, aby był najbardziej odpowiedni dla typu obiektu - + Transform Przemieszczenie - + The object will have its placement editable with the Std TransformManip command Obiekt będzie miał umiejscowienie edytowalne za pomocą polecenia Przemieszczenie - + Cutting Cięcie - + This edit mode is implemented as available but currently does not seem to be used by any object Ten tryb edycji jest zaimplementowany jako dostępny, ale obecnie nie wydaje się być używany przez żaden obiekt - + Color Kolor - + The object will have the color of its individual faces editable with the Part FaceColors command Kolor poszczególnych ścian obiektu będzie można edytować za pomocą polecenia Kolor powierzchni @@ -592,7 +592,7 @@ Press left mouse button - Naciśnij lewy przycisk myszki + Wciśnij lewy przycisk myszki @@ -788,37 +788,37 @@ podczas kliknięcia lewym lub prawym przyciskiem myszki i przesuwaj kursor w gó Gui::Dialog::CameraDialog - + Camera settings Ustawienia ujęcia widoku - + Orientation Orientacja - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Bieżący widok @@ -1124,7 +1124,7 @@ Jeśli ta opcja nie jest zaznaczona, właściwość musi być jednoznacznie nazw Macros - Makropolecenie + Makrodefinicje @@ -2443,7 +2443,7 @@ Proszę podać inny katalog. Reset - Resetuj + Reset @@ -2458,72 +2458,72 @@ Proszę podać inny katalog. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Zresetuj ustawienia strony "%1" ... - + Resets the user settings for the page '%1' Resetuje ustawienia użytkownika dla strony"%1" - + Reset group '%1'... Zresetuj ustawienia z grupy '%1'... - + Resets the user settings for the group '%1' Resetuje ustawienia użytkownika dla wybranej grupy "%1" - + Reset all... Zresetuj wszystko ... - + Resets the user settings entirely Resetuje wszystkie ustawienia użytkownika - + Clear user settings Wyczyść ustawienia użytkownika - + Do you want to clear all your user settings? Czy chcesz usunąć wszystkie ustawienia użytkownika? - + If you agree all your settings will be cleared. Jeśli się zgodzisz, wszystkie Twoje ustawienia zostaną usunięte. - + Wrong parameter Nieprawidłowy parametr - + Restart required Wymagany restart - + You must restart FreeCAD for changes to take effect. Musisz zrestartować FreeCAD, aby zmiany zaczęły obowiązywać. - + Restart now Uruchom ponownie teraz - + Restart later Uruchom ponownie później @@ -2739,7 +2739,7 @@ Proszę podać inny katalog. Reset - Reset + Resetuj @@ -2860,35 +2860,35 @@ in the corner -- in % of height/width of viewport w rogu rzutni — w % wysokości / szerokości - + Axis cross will be shown by default at file opening or creation Podczas edycji domyślnie będzie wyświetlany krzyżyk osi modelu - + Show axis cross by default Domyślnie pokazuj krzyżyk osi modelu - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Podczas edycji w lewym dolnym rogu będzie wyświetlany czas potrzebny do wykonania ostatniej operacji i wynikowa liczba klatek na sekundę - + Show counter of frames per second Pokaż licznik klatek na sekundę - + Rendering Renderowanie - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. Zmiana tej opcji wymaga ponownego uruchomienia aplikacji. - + Use software OpenGL Wyłącz sprzętowe wspomaganie renderowania - + Use OpenGL VBO (Vertex Buffer Object) Użyj OpenGL VBO (Vertex Buffer Object) - + Render cache Pamięć podręczna dla renderowania - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2935,7 +2935,17 @@ od anomalii graficznych do błędów spowodowanych awarią GPU. Pamiętaj, o zgłoszeniu aktywacji tej nastawy podczas szukania wsparcia na forum FreeCAD. - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2952,92 +2962,92 @@ tylko cache w głównym węźle graficznym obrazu. Oferuje to najszybszą prędk ale wolniej reaguje na każdą zmianę ujęcia. - + Auto Automatycznie - + Distributed Rozproszone - + Centralized Scentralizowane - + Anti-Aliasing Wygładzanie - + What kind of multisample anti-aliasing is used Jaki zostanie użyty rodzaj antyaliasingu wielopróbkowego - + None Brak - + Line Smoothing Wygładzanie linii - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: Przezroczystość obiektów: - + Render types of transparent objects Typ wizualizacji dla przezroczystości - + One pass Jeden przebieg - + Backface pass Przebieg od tyłu - + Marker size: Rozmiar znacznika punktu: - + Size of vertices in the Sketcher, TechDraw and other workbenches Rozmiar wierzchołków w Szkicowniku, Rysunku Technicznym i innych środowiskach pracy - + Eye to eye distance for stereo modes Odległość między oczami dla trybu stereo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3046,48 +3056,48 @@ Podana wartość jest współczynnikiem, który zostanie pomnożony przez rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. - + Backlight is enabled with the defined color Podświetlenie jest włączane w określonym kolorze - - + + Backlight color Kolor podświetlenia - + Intensity Intensywność - + Intensity of the backlight Natężenie podświetlenia - + Camera type Typ projekcji - + Objects will appear in a perspective projection Podczas wyświetlania obiekty będą rzutowane w projekcji perspektywicznej - + Perspective renderin&g Renderowanie &perspektywiczne - + Objects will be projected in orthographic projection Podczas wyświetlania obiekty będą rzutowane w projekcji ortogonalnej - + Or&thographic rendering Renderowanie or&togonalne @@ -3099,57 +3109,57 @@ rozmiar ramki otaczającej obiekt 3D, który jest aktualnie wyświetlany. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Wygładzanie krawędzi - + Open a new viewer or restart %1 to apply anti-aliasing changes. Otwórz nowe okno widoku 3D lub uruchom ponownie %1, aby zobaczyć naniesione zmiany wygładzania krawędzi. @@ -3916,7 +3926,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Macro - Makropolecenia + Makrodefinicje @@ -4038,7 +4048,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Nawigacja @@ -4110,7 +4120,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Default - Domyślny + Domyślnie @@ -4124,68 +4134,78 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Kolor - + Base color for all elements Podstawowy kolor dla wszystkich elementów - + Rotation center indicator Wskaźnik środka obrotu - + Sphere size Rozmiar sfery - + Color and transparency Kolor i przezroczystość - + The size of the rotation center indicator Rozmiar wskaźnika środka obrotu - + The color of the rotation center indicator Kolor wskaźnika środka obrotu - + 3D Navigation Styl nawigacji w przestrzeni 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Lista konfiguracji przycisku myszki dla każdego wybranego ustawienia nawigacji. Wybierz zestaw, a następnie naciśnij przycisk, w celu wyświetlenia konfiguracji. - + Mouse... Myszka ... - + Navigation settings set Zestaw ustawień nawigacyjnych - + Orbit style Technika orbitalna - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4196,136 +4216,136 @@ Turntable: część zostanie obrócona wokół osi z (z powiązanymi osiami). Free Turntable: część będzie obracana wokół osi z. - + Turntable Turntable - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Tryb obrotu - + Rotations in 3D will use current cursor position as center for rotation Do obrótu w przestrzeni 3D będzie użyta pozycja kursora jako środek obrotu - + Window center Środek okna - + Drag at cursor Przeciągnij kursorem - + Object center Środek obiektu - + Default camera orientation Domyślna orientacja ujęcia widoku - + Default camera orientation when creating a new document or selecting the home view Domyślna orientacja ujęcia widoku podczas tworzenia nowego dokumentu lub wybierania widoku głównego - + Camera zoom Przybliż ujęcie widoku - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Ustawia przybliżenie ujęcia widoku z kamery dla nowych dokumentów. Wartością jest średnica kuli, która ma zmieścić się na ekranie. - + mm mm - + Animations Animacje - + Enable spinning animations that are used in some navigation styles after dragging Włącz animacje obracania, używane w niektórych stylach nawigacji po przeciągnięciu. - + Enable spinning animations Włącz animacje wirowania - + Duration of navigation animations that have a fixed duration Określony czas trwania animacji nawigacji - + Animation duration Czas trwania animacji - + The duration of navigation animations in milliseconds Czas trwania animacji nawigacji w milisekundach - + Zoom step Krok powiększenia - + Zoom operations will be performed at position of mouse pointer Operacje powiększenia będą wykonywane w odniesieniu dla pozycji kursora myszki - + Zoom at cursor Powiększ przy kursorze - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Określa krok powiększenia Stopień powiększenia "1" oznacza współczynnik 7,5 dla każdego kolejnego kroku powiększenia. - + Direction of zoom operations will be inverted Kierunek wykonania operacji przybliż / oddal zostanie odwrócony - + Invert zoom Odwrócenie operacji przybliż / oddal - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4334,57 +4354,57 @@ Dotyczy tylko nawigacji gestami. Obracanie przy pomocy myszki nie jest blokowane. - + Disable touchscreen tilt gesture Wyłącz gest obrotu na ekranie dotykowym - + Isometric Izometryczny - + Dimetric Dimetryczny - + Trimetric Trimetryczny - + Top Od góry - + Front Od przodu - + Left Od lewej - + Right Od prawej - + Rear Od tył - + Bottom Od dołu - + Custom Niestandardowy @@ -5644,7 +5664,7 @@ wstępnie wybranymi przed otwarciem tego okna Gui::DockWnd::PropertyDockView - + Property View Widok właściwości @@ -6108,15 +6128,15 @@ Do you want to save your changes? Format PDF - + Graphviz format Format Graphviz + - Export graph Eksport wykresu @@ -6144,7 +6164,7 @@ Do you want to save your changes? Press middle mouse button - Naciśnij środkowy przycisk myszki + Wciśnij środkowy przycisk myszki @@ -6260,7 +6280,7 @@ Do you want to save your changes? Macros - Makrodefinicje + Makropolecenie @@ -6699,14 +6719,14 @@ Jak chcesz kontynuować? Gui::PropertyView - - + + View Widok - - + + Data Dane @@ -7206,7 +7226,7 @@ Do you want to specify another directory? Press middle mouse button - Wciśnij środkowy przycisk myszki + Naciśnij środkowy przycisk myszki @@ -7224,7 +7244,7 @@ Do you want to specify another directory? Press left mouse button - Wciśnij lewy przycisk myszki + Naciśnij lewy przycisk myszki @@ -7676,22 +7696,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Eksportuj do formatu PDF - + PDF file Plik PDF - + Opening file failed Otwarcie pliku nie powiodło się - + Can't open file '%1' for writing. Nie można otworzyć pliku "%1" do zapisu. @@ -7951,45 +7971,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Nieznany typ pliku - - + + Cannot open unknown filetype: %1 Nie można otworzyć pliku nieznanego typu: %1 - + Export failed Eksport nie powiódł się - + Cannot save to unknown filetype: %1 Nie można zapisać do pliku nieznanego typu: %1 - + Workbench failure Awaria środowiska pracy - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. W tym systemie działa OpenGL w wersji %1.%2. FreeCAD wymaga OpenGL 2.0 lub nowszego. W razie potrzeby zaktualizuj sterownik i/lub kartę graficzną. - + Invalid OpenGL Version Nieprawidłowa wersja OpenGL @@ -8040,8 +8060,8 @@ Do you want to specify another directory? Eksportuj do PDF... - + Unsaved document Niezapisany dokument @@ -8609,7 +8629,7 @@ Proszę otworzyć okno przeglądarki i wpisać: http://localhost:%1.Nie znaleziono pliku %1 w %2, ani w %3 - + Navigation styles Style nawigacji @@ -8910,8 +8930,8 @@ bieżącej kopii zostaną utracone. Włącz / wyłącz nakładkę - + Toggle floating window Włącz / wyłącz pływające okno @@ -8927,199 +8947,194 @@ bieżącej kopii zostaną utracone. Naciśnij ESC, aby ukryć podpowiedź - + UI Interfejs użytkownika - + Tree view Widok drzewa - + Item background color Kolor tła elementu - + Item background padding Wypełnienie tła elementu - + Resizable columns Kolumny z możliwością zmiany rozmiaru - - Show item checkbox - Pokaż pole wyboru elementu - - - + Hide extra column Ukryj dodatkową kolumnę - + Hide scroll bar Ukryj pasek przewijania - + Hide header Ukryj nagłówek - + IconSize Rozmiar ikon - + FontSize Rozmiar czcionki - + ItemSpacing Rozstaw obiektów - + Overlay Nakładka - + Hide tab bar Ukryj pasek kart - + Hide property view scroll bar Ukryj pasek przewijania właściwości - + Auto hide in non 3D view Automatyczne ukrywanie poza widokiem 3D - + Auto mouse pass through Automatyczne przekazywanie myszy - + Auto mouse wheel pass through Automatyczny przejazd kółkiem myszy - + Delay mouse wheel pass through (ms) Opóźnienie przechodzenia kółka myszy przez (ms) - + Alpha test radius Promień testu Alpha - + Check Navigation Cube Zaznacz kostkę Nawigacji - + Hint trigger size Rozmiar wyzwalacza podpowiedzi - + Hint width Szerokość okienka podpowiedzi - + Left panel hint offset Odsunięcie z lewej panelu podpowiedzi - + Left panel hint length Długość lewego panelu podpowiedzi - + Right panel hint offset Odsunięcie z prawej panelu podpowiedzi - + Right panel hint length Długość prawego panelu podpowiedzi - + Top panel hint offset Odsunięcie góry panelu podpowiedzi - + Top panel hint length Długość podpowiedzi panelu górnego - + Bottom panel hint offset Odsunięcie dołu panelu podpowiedzi - + Bottom panel hint length Długość podpowiedzi panelu dolnego - + Hint show tab bar Podpowiedź pokaż pasek kart - + Hint delay (ms) Opóźnienie podpowiedzi (ms) - + Splitter auto hide delay (ms) Opóźnienie automatycznego ukrywania rozdzielacza (ms) - + Activate on hover Aktywuj po wskazaniu kursorem - + Layout delay (ms) Opóźnienie układu (ms) - + Animation duration (ms) Czas trwania animacji (ms) - + Animation curve type Typ krzywej animacji Active object - Active object + Aktywny obiekt @@ -10045,8 +10060,8 @@ bieżącej kopii zostaną utracone. Utwórz nowy pusty dokument - + Unnamed Nienazwany @@ -11229,7 +11244,7 @@ Służy do rozmieszczania obiektów, które mają kształt topologiczny, takich Fullscreen - Pełny ekran + Cały ekran @@ -11475,7 +11490,7 @@ Służy do rozmieszczania obiektów, które mają kształt topologiczny, takich Fullscreen - Cały ekran + Pełny ekran @@ -11828,7 +11843,7 @@ Czy nadal chcesz kontynuować? Macro - Makrodefinicje + Makropolecenia @@ -12356,12 +12371,12 @@ po uruchomieniu FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Ruchoma kostka nawigacyjna - + Drag and place NaviCube Przeciągnij i umieść Kostkę nawigacyjną @@ -12369,32 +12384,32 @@ po uruchomieniu FreeCAD NaviCubeSettings - + FRONT PRZÓD - + TOP GÓRA - + RIGHT PRAWA - + REAR TYŁ - + BOTTOM SPÓD - + LEFT LEWA @@ -12636,7 +12651,7 @@ po uruchomieniu FreeCAD Default unit system: - Default unit system: + Domyślny układ jednostek: @@ -12881,47 +12896,47 @@ wyświetli ekran powitalny Niestandardowy (%1px) - + Combo View Widok połączony - + TreeView and PropertyView Widok drzewa i widok właściwości - + Preference Pack Name Nazwa Pakietu preferencji - + Tags Znaczniki - + Apply Zastosuj - + Apply the %1 preference pack Zastosuj pakiet preferencji: %1 - + Choose a FreeCAD config file to import Wybierz plik konfiguracyjny FreeCAD do importu - + File exists Plik już Istnieje - + A preference pack with that name already exists. Overwrite? Pakiet ustawień o tej nazwie już istnieje! Czy chcesz go zastąpić? @@ -13642,7 +13657,7 @@ gdy wszystkie piksele wewnątrz regionu są nieprzezroczyste. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + Wyświetla widok właściwości, który wyświetla właściwości wybranego obiektu. diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 8a443c7b6f..49e9f562d8 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -117,7 +117,7 @@ Editar - + Import Importar @@ -188,8 +188,8 @@ Posicionamento - + Transform Transformar @@ -421,42 +421,42 @@ EditMode - + Default Padrão - + The object will be edited using the mode defined internally to be the most appropriate for the object type O objeto será editado usando o modo definido internamente para ser o mais apropriado para o tipo de objeto - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command O objeto terá seu posicionamento editável com o comando Std TransformManip - + Cutting Corte - + This edit mode is implemented as available but currently does not seem to be used by any object Este modo de edição está implementado como disponível, mas atualmente não parece ser usado por nenhum objeto - + Color Cor - + The object will have the color of its individual faces editable with the Part FaceColors command O objeto terá a cor de suas faces individuais editáveis com o comando Part FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Configurações da câmera - + Orientation Orientação - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista atual @@ -2456,72 +2456,72 @@ Por favor especifique outro diretório. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Limpar as configurações de usuário - + Do you want to clear all your user settings? Você quer apagar todas as suas configurações do usuário? - + If you agree all your settings will be cleared. Se você concordar, todas as suas configurações serão apagadas. - + Wrong parameter Parâmetro incorreto - + Restart required Reinicialização necessária - + You must restart FreeCAD for changes to take effect. Você deve reiniciar o FreeCAD para que as alterações tenham efeito. - + Restart now Reiniciar agora - + Restart later Reiniciar mais tarde @@ -2858,35 +2858,35 @@ in the corner -- in % of height/width of viewport no canto -- em % de altura/largura da janela de visualização - + Axis cross will be shown by default at file opening or creation Cruzamento de eixo será exibido por padrão na abertura ou criação do arquivo - + Show axis cross by default Mostrar eixo do cruzamento por padrão - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files O tempo necessário para a última operação e a taxa de quadros serão mostrados no canto inferior esquerdo nos arquivos abertos - + Show counter of frames per second Mostrar contador de frames por segundo - + Rendering Renderizando - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. Mudar esta opção requer uma reinicialização da aplicação. - + Use software OpenGL Utilizar software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Usar OpenGL VBO (Vertex Buffer Object) - + Render cache Cache de renderização - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2933,7 +2933,17 @@ problemas que variam de anomalias gráficas a erros e bugs da GPU. Lembre-se de relatar esta configuração como ativada ao buscar suporte nos fóruns do FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2950,92 +2960,92 @@ apenas realiza o cache no nó raiz gráfico da cena. Isto oferece a maior veloci mas mais lenta para qualquer mudança de cena. - + Auto Auto - + Distributed Distribuído - + Centralized Centralizado - + Anti-Aliasing Suavização de serrilhado - + What kind of multisample anti-aliasing is used Que tipo de anti-aliasing de múltiplas amostras é usado - + None Nenhum - + Line Smoothing Alisamento de linha - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objetos transparentes: - + Render types of transparent objects Renderizar tipos de objetos transparentes - + One pass Uma etápa - + Backface pass Etapa para as faces ocultas - + Marker size: Tamanho do marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Tamanho dos vértices no esboço, TechDraw e outras bancadas - + Eye to eye distance for stereo modes Distância entre olhos para modos estéreo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3044,48 +3054,48 @@ O valor especificado é um fator que será multiplicado com o tamanho da caixa delimitadora do objeto 3D que está sendo exibido. - + Backlight is enabled with the defined color A luz de fundo está habilitada com a cor definida - - + + Backlight color Cor de fundo - + Intensity Intensidade - + Intensity of the backlight Intensidade da luz de fundo - + Camera type Tipo de câmera - + Objects will appear in a perspective projection Objetos aparecerão em uma projeção de perspectiva - + Perspective renderin&g Renderização de perspectiva - + Objects will be projected in orthographic projection Objetos serão projetados em projeção ortográfica - + Or&thographic rendering Renderização ortográfica @@ -3097,57 +3107,57 @@ tamanho da caixa delimitadora do objeto 3D que está sendo exibido. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Suavização de serrilhado - + Open a new viewer or restart %1 to apply anti-aliasing changes. Abra uma nova visualização ou reinicie %1 para aplicar as alterações de suavização de serrilhado. @@ -4037,7 +4047,7 @@ Você também pode usar o formulário: João Silva <joao@silva.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navegação @@ -4123,68 +4133,78 @@ Você também pode usar o formulário: João Silva <joao@silva.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Cor - + Base color for all elements Cor base para todos os elementos - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navegação 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Mostra as configurações dos botões do mouse para cada configuração de navegação escolhida. Selecione um conjunto e, em seguida, pressione o botão para visualizar as referidas configurações. - + Mouse... Mouse... - + Navigation settings set Configurações de navegação definidas - + Orbit style Estilo de orbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4195,136 +4215,136 @@ Girarmesa a parte será girada em torno do eixo z (com eixos limitados). Girarmesa livre: a parte será girada em torno do eixo z. - + Turntable Plataforma - + Trackball Trackball - + Free Turntable Girarmesa Livre - + Rotation mode Modo de rotação - + Rotations in 3D will use current cursor position as center for rotation Rotações de câmera usarão a posição atual do cursor como centro de rotação - + Window center Centro da janela - + Drag at cursor Arraste no cursor - + Object center Centro do objeto - + Default camera orientation Orientação padrão da câmera - + Default camera orientation when creating a new document or selecting the home view Orientação padrão da câmera ao criar um novo documento ou selecionar a vista inicial - + Camera zoom Zoom da Câmera - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Define o zoom da câmera para novos documentos. O valor é o diâmetro de uma esfera que caberia na tela. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Operações de zoom serão realizadas a partir da posição do cursor do mouse - + Zoom at cursor Zoom no cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Quanto será ampliado. O intervalo de ampliação '1' significa um fator de 7,5 para cada intervalo. - + Direction of zoom operations will be inverted A direção das operações de zoom será invertida - + Invert zoom Inverter o zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4333,57 +4353,57 @@ Afeta somente o estilo de navegação por gesto. A inclinação do mouse não está afetada por esta configuração. - + Disable touchscreen tilt gesture Desativar o gesto de inclinação da tela sensível ao toque - + Isometric Isométrico - + Dimetric Diamétrico - + Trimetric Trimétrico - + Top Topo - + Front Frente - + Left Esquerda - + Right Direito - + Rear Traseira - + Bottom De baixo - + Custom Personalizado @@ -5637,7 +5657,7 @@ originalmente selecionados antes de abrir esta caixa de diálogo Gui::DockWnd::PropertyDockView - + Property View Tela de propriedades @@ -6101,15 +6121,15 @@ Deseja salvar as alterações? Formato PDF - + Graphviz format Graphviz format + - Export graph Exportar gráfico @@ -6692,14 +6712,14 @@ Deseja prosseguir? Gui::PropertyView - - + + View Vista - - + + Data Dados @@ -7669,22 +7689,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exportar PDF - + PDF file Arquivo PDF - + Opening file failed Falha ao abrir arquivo - + Can't open file '%1' for writing. Não é possível abrir o arquivo '%1' para a gravação. @@ -7944,45 +7964,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Tipo de arquivo desconhecido - - + + Cannot open unknown filetype: %1 Não é possível abrir o tipo de arquivo desconhecido: %1 - + Export failed Falha na exportação - + Cannot save to unknown filetype: %1 Não é possível salvar em tipo de arquivo desconhecido: %1 - + Workbench failure Falha da bancada de trabalho - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Este sistema está rodando OpenGL %1.%2. FreeCAD requer OpenGL 2.0 ou superior. Por favor, atualize seu driver gráfico e/ou sua placa de vídeo conforme necessário. - + Invalid OpenGL Version Versão OpenGL inválida @@ -8033,8 +8053,8 @@ Do you want to specify another directory? Exportar PDF... - + Unsaved document Documento não salvo @@ -8599,7 +8619,7 @@ Please open a browser window and type in: http://localhost:%1. Não é possível encontrar o arquivo %1 nem em %2, nem em %3 - + Navigation styles Estilos de navegação @@ -8900,8 +8920,8 @@ cópia atual será perdida. Toggle overlay - + Toggle floating window Toggle floating window @@ -8917,192 +8937,187 @@ cópia atual será perdida. Press ESC to hide hint - + UI UI - + Tree view Exibição em árvore - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10035,8 +10050,8 @@ cópia atual será perdida. Criar um novo documento vazio - + Unnamed Sem nome @@ -10911,7 +10926,7 @@ It is meant to arrange objects that have a Part TopoShape, like Part Primitives, Home - Vista inicial + Início @@ -12345,12 +12360,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Cubo de navegação móvel - + Drag and place NaviCube Arraste e posicione o NaviCube @@ -12358,32 +12373,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRENTE - + TOP TOPO - + RIGHT DIREITA - + REAR ATRÁS - + BOTTOM BASE - + LEFT ESQUERDA @@ -12869,47 +12884,47 @@ a tela de abertura será exibida Personalizado (%1px) - + Combo View Tela combinada - + TreeView and PropertyView TreeView e Propriedades - + Preference Pack Name Nome do pacote de preferências - + Tags Etiquetas - + Apply Aplicar - + Apply the %1 preference pack Aplicar o pacote de preferências %1 - + Choose a FreeCAD config file to import Escolha um arquivo de configuração do FreeCAD para importar - + File exists Arquivo existe - + A preference pack with that name already exists. Overwrite? Já existe um pacote de preferências com esse nome. Deseja substituí-lo? diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index ca4f95c6da..fcb8865da1 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -117,7 +117,7 @@ Editar - + Import Importar @@ -188,8 +188,8 @@ Colocação - + Transform Transformar @@ -421,42 +421,42 @@ EditMode - + Default Predefinição - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Transformar - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Corte - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Cor - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Definições da câmara - + Orientation Orientação - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista atual @@ -2456,72 +2456,72 @@ Por favor, indique outra pasta. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Limpar as configurações do utilizador - + Do you want to clear all your user settings? Você quer apagar todas as suas configurações de utilizador? - + If you agree all your settings will be cleared. Se aceitar todas as suas configurações serão apagadas. - + Wrong parameter Parâmetro Errado - + Restart required Restart required - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2858,36 +2858,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Axis cross will be shown by default at file opening or creation - + Show axis cross by default Show axis cross by default - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files - + Show counter of frames per second Mostrar contador das imagens por segundo - + Rendering Renderização - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2896,22 +2896,22 @@ Changing this option requires a restart of the application. Changing this option requires a restart of the application. - + Use software OpenGL Utilizar software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Use OpenGL VBO (Vertex Buffer Object) - + Render cache Render cache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Auto - + Distributed Distribuído - + Centralized Centralizado - + Anti-Aliasing Suavização de serrilhado - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Nenhum - + Line Smoothing Suavização da linha - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objetos transparentes: - + Render types of transparent objects Render types of transparent objects - + One pass Uma passagem - + Backface pass Backface pass - + Marker size: Tamanho do marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Eye to eye distance for stereo modes - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color Backlight is enabled with the defined color - - + + Backlight color Cor da luz de fundo - + Intensity Intensidade - + Intensity of the backlight Intensidade da luz de fundo - + Camera type Tipo de câmara - + Objects will appear in a perspective projection Objetos aparecerão em uma projeção de perspectiva - + Perspective renderin&g Renderização de perspectiva - + Objects will be projected in orthographic projection Objetos serão projetados em projeção ortográfica - + Or&thographic rendering Renderização Or&tográfica @@ -3098,57 +3108,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Suavização de serrilhado - + Open a new viewer or restart %1 to apply anti-aliasing changes. Abra um novo visualizador ou reiniciar o %1 para aplicar as alterações de suavização de serrilhado. @@ -4038,7 +4048,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navegação @@ -4124,68 +4134,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Cor - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navegação 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - + Mouse... Rato ... - + Navigation settings set Navigation settings set - + Orbit style Estilo da Órbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4196,136 +4216,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Plataforma giratória - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Modo de Rotação - + Rotations in 3D will use current cursor position as center for rotation Rotations in 3D will use current cursor position as center for rotation - + Window center Window center - + Drag at cursor Drag at cursor - + Object center Centro do objeto - + Default camera orientation Default camera orientation - + Default camera orientation when creating a new document or selecting the home view Default camera orientation when creating a new document or selecting the home view - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Zoom operations will be performed at position of mouse pointer - + Zoom at cursor Zoom no cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted Direction of zoom operations will be inverted - + Invert zoom Inverter Zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4334,57 +4354,57 @@ Affects only gesture navigation style. Mouse tilting is not disabled by this setting. - + Disable touchscreen tilt gesture Desativar o gesto de inclinação da tela sensível ao toque - + Isometric Isométrica - + Dimetric Dimetrica - + Trimetric Trimétrica - + Top Topo - + Front Frente - + Left Esquerda - + Right Direita - + Rear Traseira - + Bottom De baixo - + Custom Personalizado @@ -5640,7 +5660,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Ver Propriedade @@ -6105,15 +6125,15 @@ Deseja guardar as suas alterações? Formato PDF - + Graphviz format Formato do Gráfico + - Export graph Exportar gráfico @@ -6696,14 +6716,14 @@ Como pretende continuar? Gui::PropertyView - - + + View Ver - - + + Data Dados @@ -7676,22 +7696,22 @@ Quer especificar outro diretório? Gui::View3DInventor - + Export PDF Exportar PDF - + PDF file Ficheiro PDF - + Opening file failed Falha ao abrir ficheiro - + Can't open file '%1' for writing. Não é possível abrir o ficheiro '%1' para escrita. @@ -7951,45 +7971,45 @@ Quer especificar outro diretório? Python - - - + + + Unknown filetype Tipo de ficheiro desconhecido - - + + Cannot open unknown filetype: %1 Não é possível abrir o tipo de ficheiro desconhecido: %1 - + Export failed Exportação falhada - + Cannot save to unknown filetype: %1 Não é possível guardar um tipo de ficheiro desconhecido: %1 - + Workbench failure Falha da bancada de trabalho - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8040,8 +8060,8 @@ Quer especificar outro diretório? A exportar PDF ... - + Unsaved document Documento não guardado @@ -8608,7 +8628,7 @@ Por favor, abra um navegador e digite: http://localhost:%1. Não é possível encontrar o ficheiro %1, nem em %2 ou em %3 - + Navigation styles Estilos de Navegação @@ -8909,8 +8929,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8926,192 +8946,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Visualizar em Árvore - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10044,8 +10059,8 @@ the current copy will be lost. Criar um Novo Documento vazio - + Unnamed Sem nome @@ -12355,12 +12370,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12368,32 +12383,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12879,47 +12894,47 @@ exibirá a janela de abertura Personalizado (%1px) - + Combo View Visualização Combinada - + TreeView and PropertyView TreeView and PropertyView - + Preference Pack Name Preference Pack Name - + Tags Tags - + Apply Aplicar - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists File exists - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 2db397a992..4e62ebc971 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -117,7 +117,7 @@ Editare - + Import Import @@ -188,8 +188,8 @@ Amplasare - + Transform Transformare @@ -421,42 +421,42 @@ EditMode - + Default Implicit - + The object will be edited using the mode defined internally to be the most appropriate for the object type Obiectul va fi editat folosind modul definit intern pentru a fi cel mai potrivit pentru tipul obiectului - + Transform Transformare - + The object will have its placement editable with the Std TransformManip command Obiectul va avea posibilitatea de a plasa cu comanda Std TransformManip - + Cutting Tăiere - + This edit mode is implemented as available but currently does not seem to be used by any object Acest mod de editare este implementat ca disponibil, dar în prezent nu pare să fie folosit de orice obiect - + Color Culoare - + The object will have the color of its individual faces editable with the Part FaceColors command Obiectul va avea culoarea fețelor sale individuale editabile cu comanda Part FaceColors @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Setari camera - + Orientation Orientarea - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vedere curentă @@ -2455,72 +2455,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Șterge setãrile utilizator - + Do you want to clear all your user settings? Vrei să ştergi toate setările de utilizator? - + If you agree all your settings will be cleared. Dacă sunteţi de acord vor fi eliminate toate setările. - + Wrong parameter Parametru greşit - + Restart required Repornire necesară - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2857,36 +2857,36 @@ in the corner -- in % of height/width of viewport în colţ -- în % înălţime/lăţime de vizualizare - + Axis cross will be shown by default at file opening or creation Crucea axei va fi afișată implicit la deschiderea sau crearea fișierului - + Show axis cross by default Afișare implicită a sistemului de axe - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Timpul necesar pentru ultima operațiune și rata de cadre rezultată vor fi afișate în colțul din stânga jos în fișierele deschise - + Show counter of frames per second Arată contorul de cadre pe secundă - + Rendering Randare - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2895,22 +2895,22 @@ Changing this option requires a restart of the application. Modificarea acestei opțiuni necesită repornirea aplicației. - + Use software OpenGL Utilizaţi OpenGL software - + Use OpenGL VBO (Vertex Buffer Object) Utilizaţi OpenGL VBO (Vertex Buffer Object) - + Render cache Cache-ul de randare - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2933,7 +2933,17 @@ probleme, de la anomalii grafice la erori de blocare a GPU-ului. A își aminti raportați această setare ca fiind activată atunci când căutați asistență pe forumurile FreeCAD - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2950,92 +2960,92 @@ doar cache-ul din nodul rădăcină al graficului de scenă. Aceasta oferă cea dar un răspuns mai lent la orice schimbare de scenă. - + Auto Automat - + Distributed Distribuit - + Centralized Centralizat - + Anti-Aliasing Anti-aliasing - + What kind of multisample anti-aliasing is used Ce tip de antialiasing multisample se utilizează - + None Niciunul - + Line Smoothing Netezire linie - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Obiecte transparente: - + Render types of transparent objects Redare tipuri de obiecte transparente - + One pass O trecere - + Backface pass Trecere pe verso - + Marker size: Dimensiune marcator: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Distanța dintre ochi pentru modurile stereo - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3044,48 +3054,48 @@ Valoarea specificată este un factor care va fi multiplicat cu dimensiunea casetei de încadrare a obiectului 3D care este afișat în prezent. - + Backlight is enabled with the defined color Lumina de fundal este activată având culoarea definită - - + + Backlight color Culoarea luminii de fundal - + Intensity Intensitate - + Intensity of the backlight Intensitatea luminii de fundal - + Camera type Tipul camerei video - + Objects will appear in a perspective projection Obiectele vor apărea într-o proiecție de perspectivă - + Perspective renderin&g Redar&e din perspectivă - + Objects will be projected in orthographic projection Obiectele vor fi proiectate în proiecții ortografice - + Or&thographic rendering Vedere or&togonală @@ -3097,57 +3107,57 @@ dimensiunea casetei de încadrare a obiectului 3D care este afișat în prezent. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Deschide un vizualizator nou sau reporniţi %1 pentru a aplica modificările anti-aliasing. @@ -4038,7 +4048,7 @@ Puteți folosi și formatul: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigare @@ -4124,68 +4134,78 @@ Puteți folosi și formatul: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Culoare - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navigare 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Listează configurările butonului mouse-ului pentru fiecare setare de navigare aleasă. Selectează un set și apoi apasă butonul pentru a vedea configurația menționată. - + Mouse... Mouse... - + Navigation settings set Set de setări de navigație - + Orbit style Stil de rotație - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4196,136 +4216,136 @@ Turntable: partea va fi rotită în jurul axei z (cu axe constrânse). Gratuit de întoarcere: partea va fi rotită în jurul axei z. - + Turntable Placa turnantă - + Trackball Trackball - + Free Turntable Gratuit de Turntable - + Rotation mode Modul de rotație - + Rotations in 3D will use current cursor position as center for rotation Rotațiile în 3D vor utiliza poziția curentă a cursorului ca centru de rotație - + Window center Centrul ferestrei - + Drag at cursor Trageți la cursor - + Object center Centrul obiectului - + Default camera orientation Orientarea implicită a camerei - + Default camera orientation when creating a new document or selecting the home view Orientarea implicită a camerei la crearea unui nou document sau la selectarea vizualizării de bază - + Camera zoom Zoom cameră - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Setează zoom-ul camerei pentru documentele noi. Valoarea este diametrul sferei pentru a o potrivi pe ecran. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Operațiunile de zoom vor fi efectuate la poziția indicatorului mouse-ului - + Zoom at cursor Mareste la pozitia cursorului - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Cât de mult va fi mărit. Pasul de mărire de '1' înseamnă un factor de 7,5 pentru fiecare pas de mărire. - + Direction of zoom operations will be inverted Direcția operațiunilor de zoom va fi inversată - + Invert zoom Inverseaza zoom-ul - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4334,57 +4354,57 @@ Afectează numai stilul de navigare prin gesturi. Înclinarea cu mouse-ul nu este dezactivată de această setare. - + Disable touchscreen tilt gesture Dezactivaţi inclinarea prin gest a ecranului tactil - + Isometric Izometrică - + Dimetric Dimetric - + Trimetric Trimetric - + Top Partea de sus - + Front Din față - + Left Stanga - + Right Dreapta - + Rear Din spate - + Bottom Partea de jos - + Custom Personalizat @@ -5640,7 +5660,7 @@ selectate inițial, înainte de a deschide acest dialog Gui::DockWnd::PropertyDockView - + Property View Vizualizare proprietăţi @@ -6104,15 +6124,15 @@ Doriți să salvați modificările? PDF format - + Graphviz format Graphviz format + - Export graph Exportă graficul @@ -6695,14 +6715,14 @@ Cum doresti sa continuam? Gui::PropertyView - - + + View Vizualizare - - + + Data Date @@ -7675,22 +7695,22 @@ Doriţi să specificaţi un alt director? Gui::View3DInventor - + Export PDF Exportă PDF - + PDF file Fişier PDF - + Opening file failed Deschiderea fișierului a eșuat - + Can't open file '%1' for writing. Fișierul r '%1' nu acceptă scrierea. @@ -7950,45 +7970,45 @@ Doriţi să specificaţi un alt director? Python - - - + + + Unknown filetype Tip de fișier necunoscut - - + + Cannot open unknown filetype: %1 Imposibil de deschis fişierul în format necunoscut:%1 - + Export failed Export eșuat - + Cannot save to unknown filetype: %1 Nu se poate salva într-un format de fişier necunoscut:%1 - + Workbench failure Bancul de lucru a eşuat - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8039,8 +8059,8 @@ Doriţi să specificaţi un alt director? Export PDF... - + Unsaved document Document nesalvat @@ -8607,7 +8627,7 @@ Please open a browser window and type in: http://localhost:%1. Imposibil de găsit fișierul %1 la %2 nici în %3 - + Navigation styles Stiluri de navigare @@ -8908,8 +8928,8 @@ copia curentă va fi pierdută. Toggle overlay - + Toggle floating window Toggle floating window @@ -8925,192 +8945,187 @@ copia curentă va fi pierdută. Press ESC to hide hint - + UI UI - + Tree view Vizualizare arborescentă - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10043,8 +10058,8 @@ copia curentă va fi pierdută. Creaţi un nou document gol - + Unnamed Nedenumit @@ -12354,12 +12369,12 @@ după lansarea FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Cub de navigare mobil - + Drag and place NaviCube Trage și plasează NaviCube @@ -12367,32 +12382,32 @@ după lansarea FreeCAD NaviCubeSettings - + FRONT FRONTUL - + TOP DE SUS - + RIGHT DREPTUL - + REAR SPATE - + BOTTOM DE JOS - + LEFT STANGA @@ -12879,47 +12894,47 @@ ecranul de pornire Personalizat (%1px) - + Combo View Vizualizare combo - + TreeView and PropertyView VedereArbore și VedereProprietăți - + Preference Pack Name Numele pachetului de preferințe - + Tags Etichete - + Apply Aplică - + Apply the %1 preference pack Aplică pachetul de preferințe %1 - + Choose a FreeCAD config file to import Alegeți un fișier de configurare FreeCAD pentru import - + File exists Fișier existent - + A preference pack with that name already exists. Overwrite? Un pachet de preferințe cu același nume există deja. Doriți sa îl suprascrieți? diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 0cb61ee304..9cc403626a 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -117,7 +117,7 @@ Редактировать - + Import Импорт @@ -188,8 +188,8 @@ Расположение - + Transform Переместить @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + " Задать случайный цвет" @@ -421,42 +421,42 @@ EditMode - + Default По умолчанию - + The object will be edited using the mode defined internally to be the most appropriate for the object type Объект будет отредактирован с помощью режима, определяемого внутри наиболее подходящего для типа объекта - + Transform Преобразовать - + The object will have its placement editable with the Std TransformManip command Объекта будет иметь размещение, редактируемое с помощью команды Std TransformManip - + Cutting Обрезка - + This edit mode is implemented as available but currently does not seem to be used by any object Этот режим редактирования реализован как доступный, но в настоящее время он не используется ни одним объектом - + Color Цвет - + The object will have the color of its individual faces editable with the Part FaceColors command Объект будет иметь цвет отдельных граней, редактируемый с помощью команды Part FaceColors @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Настройки камеры - + Orientation Ориентация - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Текущий вид @@ -1392,7 +1392,7 @@ same time. The one with the highest priority will be triggered. none - отсутствует + Отсутствует @@ -2456,72 +2456,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Сбросить страницу "%1"... - + Resets the user settings for the page '%1' Сбрасывает пользовательские настройки для страницы "%1" - + Reset group '%1'... Сброс группы '%1'... - + Resets the user settings for the group '%1' Сбрасывает настройки пользователя для группы '%1' - + Reset all... Сбросить все... - + Resets the user settings entirely Сбрасывает настройки пользователя полностью - + Clear user settings Очистка пользовательских настроек - + Do you want to clear all your user settings? Вы действительно хотите очистить все Ваши пользовательские настройки? - + If you agree all your settings will be cleared. Если Вы согласны, то все Ваши пользовательские настройки будут сброшены. - + Wrong parameter Неверный параметр - + Restart required Требуется перезапуск - + You must restart FreeCAD for changes to take effect. Вы должны перезапустить FreeCAD, чтобы изменения вступили в силу. - + Restart now Перезагрузить сейчас - + Restart later Перезагрузить позже @@ -2813,7 +2813,7 @@ Specify another directory, please. Help - Помощь + Справка @@ -2857,35 +2857,35 @@ in the corner -- in % of height/width of viewport в углу -- в % от высоты/ширины области просмотра - + Axis cross will be shown by default at file opening or creation Перекрестие осей будет показано по умолчанию при открытии или создании файла - + Show axis cross by default Показывать перекрестие осей по умолчанию - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Время, необходимое для последней операции, и результирующая частота кадров будут показаны в левом нижнем углу открытых файлов - + Show counter of frames per second Показывать счетчик кадров в секунду - + Rendering Отрисовка - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2894,22 +2894,22 @@ Changing this option requires a restart of the application. Изменение этой опции требует перезапуска приложения. - + Use software OpenGL Использовать программное обеспечение OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Использовать OpenGL VBO (объекты буфера вершин) - + Render cache Кэш рендера - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2929,7 +2929,17 @@ VBO - это технология OpenGL, позволяющая хранить - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2946,92 +2956,92 @@ but slower response to any scene changes. но более медленную реакцию на любые изменения сцены. - + Auto Авто - + Distributed Распределенный - + Centralized Централизованный - + Anti-Aliasing Сглаживание - + What kind of multisample anti-aliasing is used Какой тип многопроходного сглаживания используется - + None Нет - + Line Smoothing Сглаживание линий - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Прозрачные объекты: - + Render types of transparent objects Отображение типов прозрачных объектов - + One pass Один проход - + Backface pass Проход фона - + Marker size: Размер метки: - + Size of vertices in the Sketcher, TechDraw and other workbenches Размеры вершин в Sketcher, TechDraw и других верстаках - + Eye to eye distance for stereo modes Расстояние между глаз для стерео режима - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3039,48 +3049,48 @@ bounding box size of the 3D object that is currently displayed. Указанное значение — это множитель, который будет умножаться на габаритный прямоугольный каркас текущего отображаемого трехмерного объекта. - + Backlight is enabled with the defined color Подсветка включена с определенным цветом - - + + Backlight color Цвет подсветки - + Intensity Интенсивность - + Intensity of the backlight Интенсивность подсветки - + Camera type Тип камеры - + Objects will appear in a perspective projection Объекты будут отображаться в перспективе - + Perspective renderin&g Прорисовка &перспективной проекции - + Objects will be projected in orthographic projection Объекты будут отображаться в ортографической проекции - + Or&thographic rendering Прорисовка ортогональной проекции @@ -3092,57 +3102,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5пикс. - + 7px 7пикс. - + 9px 9пикс. - + 11px 11пикс. - + 13px 13пикс. - + 15px 15пикс. - + 20px 20 пикс - + 25px 25 пикс - + 30px 30 пикс - + Anti-aliasing Сглаживание - + Open a new viewer or restart %1 to apply anti-aliasing changes. Для вступления в силу изменений режима сглаживания, откройте новое окно просмотра или перезапустите %1. @@ -3401,7 +3411,7 @@ besides the color bar General - Главный + Основные @@ -3909,7 +3919,7 @@ You can also use the form: John Doe <john@doe.com> Macro - Макрокоманда + Макрос @@ -4031,7 +4041,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Навигация @@ -4117,68 +4127,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Цвет - + Base color for all elements Основной цвет для всех элементов - + Rotation center indicator Индикатор поворота центра - + Sphere size Размер сферы - + Color and transparency Цвета и прозрачность - + The size of the rotation center indicator Размер индикатора центра вращения - + The color of the rotation center indicator Цвет индикатора центра вращения - + 3D Navigation Трёхмерная навигация - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Список настроек кнопки мыши для каждой выбранной настройки навигации. Выберите набор и затем нажмите кнопку, чтобы просмотреть указанные конфигурации. - + Mouse... Подробности стиля управления... - + Navigation settings set Набор настроек навигации - + Orbit style Вращение - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4189,136 +4209,136 @@ Free Turntable: the part will be rotated around the z-axis. Свободное вращение: деталь поворачивается относительно оси Z. - + Turntable Поворотный круг - + Trackball Trackball - + Free Turntable Свободное вращение - + Rotation mode Режим вращения - + Rotations in 3D will use current cursor position as center for rotation Вращение в 3D будет использовать текущую позицию курсора как центр вращения - + Window center Центр окна - + Drag at cursor Перенести к курсору - + Object center Центр объекта - + Default camera orientation Ориентация камеры по умолчанию - + Default camera orientation when creating a new document or selecting the home view Ориентация камеры по умолчанию при создании нового документа или выборе вида "Домой" - + Camera zoom Масштаб камеры - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Устанавливает масштаб камеры для новых документов. Значение - диаметр сферы, помещаемой на экран. - + mm мм - + Animations Анимации - + Enable spinning animations that are used in some navigation styles after dragging Включить анимацию вращения, которая используется в некоторых стилях навигации после перетаскивания - + Enable spinning animations Включить анимацию прокрутки - + Duration of navigation animations that have a fixed duration Продолжительность навигационных анимаций, имеющих фиксированную продолжительность - + Animation duration Длительность анимации - + The duration of navigation animations in milliseconds Длительность анимации навигации в миллисекундах - + Zoom step Шаг масштабирования - + Zoom operations will be performed at position of mouse pointer Операции масштабирования будут выполняться в позиции указателя мыши - + Zoom at cursor Зум туда, где мышь - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Насколько будет масштабировано. Шаг масштаба '1' означает коэффициент 7.5 для каждого шага масштаба. - + Direction of zoom operations will be inverted Направление масштабирования будет инвертировано - + Invert zoom Инвертировать зум - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4327,57 +4347,57 @@ Mouse tilting is not disabled by this setting. Наклон мыши этой настройкой не отключен. - + Disable touchscreen tilt gesture Отключить жест наклона для сенсорного экрана - + Isometric Изометрическая - + Dimetric Диметрическая - + Trimetric Триметрическая - + Top Сверху - + Front Спереди - + Left Слева - + Right Справа - + Rear Сзади - + Bottom Снизу - + Custom Произвольный @@ -5635,7 +5655,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Просмотр свойств @@ -6099,15 +6119,15 @@ Do you want to save your changes? Формат PDF - + Graphviz format Graphviz формат + - Export graph Экспорт графа @@ -6689,14 +6709,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Вид - - + + Data Данные @@ -6854,7 +6874,7 @@ Do you want to exit without saving your data? none - Отсутствует + отсутствует @@ -7670,22 +7690,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Экспортировать в PDF - + PDF file Файл PDF - + Opening file failed Ошибка при открытии файла - + Can't open file '%1' for writing. Не удается записать в файл '%1'. @@ -7920,7 +7940,7 @@ Do you want to specify another directory? General - Основные + Главный @@ -7945,45 +7965,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Неизвестный тип файла - - + + Cannot open unknown filetype: %1 Не удается открыть неизвестный файл: %1 - + Export failed Экспорт не удался - + Cannot save to unknown filetype: %1 Не удалось сохранить в неизвестном формате файла: %1 - + Workbench failure Ошибка загрузки верстака - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. В вашей системе используется OpenGL %1.%2. FreeCAD требует OpenGL 2.0 или выше. Пожалуйста, обновите ваш графический драйвер и/или карту при необходимости. - + Invalid OpenGL Version Недопустимая версия OpenGL @@ -8034,8 +8054,8 @@ Do you want to specify another directory? Экспорт PDF... - + Unsaved document Документ не сохранён @@ -8601,7 +8621,7 @@ Please open a browser window and type in: http://localhost:%1. Не удается найти файл %1, ни в %2 ни в %3 - + Navigation styles Стили навигации @@ -8902,8 +8922,8 @@ the current copy will be lost. Переключить оверлей - + Toggle floating window Переключить плавающее окно @@ -8919,199 +8939,194 @@ the current copy will be lost. Нажмите ESC для скрытия подсказки - + UI Пользовательский интерфейс - + Tree view Иерархия документа - + Item background color Фоновый цвет элемента - + Item background padding Заполнение фона элемента - + Resizable columns Изменяемые размеры столбцов - - Show item checkbox - Показать флажок элемента - - - + Hide extra column Скрыть дополнительный столбец - + Hide scroll bar Скрыть полосу прокрутки - + Hide header Не показывать заголовок - + IconSize Размер иконки - + FontSize Размер шрифта - + ItemSpacing Расстояние между предметами - + Overlay Оверлей - + Hide tab bar Скрыть панель вкладок - + Hide property view scroll bar Скрыть полосу прокрутки - + Auto hide in non 3D view Автоскрытие в не 3D - + Auto mouse pass through Проход мыши автоматически - + Auto mouse wheel pass through Проходит автоматически через колесо мыши - + Delay mouse wheel pass through (ms) Задержка прохождения колеса мыши (мс) - + Alpha test radius Радиус альфа-теста - + Check Navigation Cube Проверить куб навигации - + Hint trigger size Подсказка о размере триггера - + Hint width Ширина подсказки - + Left panel hint offset Смещение подсказки левой панели - + Left panel hint length Длина подсказки левой панели - + Right panel hint offset Смещение подсказки правой панели - + Right panel hint length Длина подсказки правой панели - + Top panel hint offset Смещение подсказки верхней панели - + Top panel hint length Длина подсказки верхней панели - + Bottom panel hint offset Смещение подсказки нижней панели - + Bottom panel hint length Длина подсказки нижней панели - + Hint show tab bar Подсказка показать панель вкладок - + Hint delay (ms) Задержка подсказки (мс) - + Splitter auto hide delay (ms) Задержка автоматического скрытия сплиттера (мс) - + Activate on hover Активировать при наведении курсора - + Layout delay (ms) Задержка макета (мс) - + Animation duration (ms) Время анимации (сек.) - + Animation curve type Тип кривой анимации Active object - Active object + Активный объект @@ -10037,8 +10052,8 @@ the current copy will be lost. Создать новый пустой документ - + Unnamed Безымянный @@ -11221,7 +11236,7 @@ It is meant to arrange objects that have a Part TopoShape, like Part Primitives, Fullscreen - Полноэкранный режим + На весь экран @@ -11467,7 +11482,7 @@ It is meant to arrange objects that have a Part TopoShape, like Part Primitives, Fullscreen - На весь экран + Полноэкранный режим @@ -11810,7 +11825,7 @@ Do you still want to proceed? Help - Справка + Помощь @@ -11820,7 +11835,7 @@ Do you still want to proceed? Macro - Макрос + Макрокоманда @@ -12347,12 +12362,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Подвижный навигационный куб - + Drag and place NaviCube Перетащить и поместить в NaviCube @@ -12360,32 +12375,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT Спереди - + TOP Сверху - + RIGHT Справа - + REAR Сзади - + BOTTOM Снизу - + LEFT Слева @@ -12627,7 +12642,7 @@ after FreeCAD launches Default unit system: - Default unit system: + "Система единиц измерения как в системе:": @@ -12871,47 +12886,47 @@ display the splash screen Пользовательский (%1пикс.) - + Combo View Комбо панель - + TreeView and PropertyView Иерархия документа и свойства разделено (две панели) - + Preference Pack Name Название пакета настроек - + Tags Метки - + Apply Применить - + Apply the %1 preference pack Применить %1 набор настроек - + Choose a FreeCAD config file to import Выберите файл конфигурации FreeCAD для импорта - + File exists Файл существует - + A preference pack with that name already exists. Overwrite? Пакет настроек с таким именем уже существует. Перезаписать? @@ -13631,7 +13646,7 @@ the region are non-opaque. Show the property view, which displays the properties of the selected object. - Show the property view, which displays the properties of the selected object. + "Вывести свойства выделенного объекта на экран". diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index aeafc0eb30..d8ad797511 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -117,7 +117,7 @@ Uredi - + Import Uvozi @@ -188,8 +188,8 @@ Postavitev - + Transform Preoblikuj @@ -421,42 +421,42 @@ EditMode - + Default - Privzeto + Privzeti - + The object will be edited using the mode defined internally to be the most appropriate for the object type Urejanje predmeta bo v načinu, ki je notranje določen kot najprimernejši glede na vrsto predmeta - + Transform Preoblikuj - + The object will have its placement editable with the Std TransformManip command Postavitev predmeta bo mogoče urejati z ukazom Std TransformManip - + Cutting Prerez - + This edit mode is implemented as available but currently does not seem to be used by any object Ta urejevalni način je razpoložljiv, vendar trenutno ni kaže, da bi ga uporabljal katerikoli predmet - + Color Barva - + The object will have the color of its individual faces editable with the Part FaceColors command Barvo posameznih ploskev predmeta bo mogoče urejati z ukazom FaceColors @@ -592,7 +592,7 @@ Press left mouse button - Pritisnite levi miškin gumb + Pritisnite levo miškino tipko @@ -788,37 +788,37 @@ kliknete na levo oz. desno tipko in premikate miško gor oz. dol Gui::Dialog::CameraDialog - + Camera settings Nastavitve kamere - + Orientation Usmerjenost - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni pogled @@ -899,7 +899,7 @@ kliknete na levo oz. desno tipko in premikate miško gor oz. dol Angle - Kot + Kót @@ -1098,7 +1098,7 @@ Neglede na to ima lastnost v skriptih še vedno polni naziv, kot npr. "obj.Ime_S Name - Naziv + Ime @@ -1395,7 +1395,7 @@ tisti z višjo prednostjo. none - brez + nobeden @@ -2459,72 +2459,72 @@ Navedite drugo mapo. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Ponastavi skupino '%1' ... - + Resets the user settings for the group '%1' Ponastavi uporabniške nastavitve skupine '%1' - + Reset all... Ponastavi vse ... - + Resets the user settings entirely Ponastavi vse uporabniške nastavitve - + Clear user settings Počisti uporabniške nastavitve - + Do you want to clear all your user settings? Ali želite počistiti vse uporabniške nastavitve? - + If you agree all your settings will be cleared. Če se strinjate, bodo vse nastavitve počiščene. - + Wrong parameter Napačna določilka - + Restart required Potreben pozagon - + You must restart FreeCAD for changes to take effect. Da bi spremembe stopile v veljavo, morate ponovno zagnati FreeCAD. - + Restart now Ponovno zaženi zdaj - + Restart later Ponovno zaženi pozneje @@ -2861,36 +2861,36 @@ in the corner -- in % of height/width of viewport v vogalu -- merjeno v % višine/širine vpogleda - + Axis cross will be shown by default at file opening or creation Križ osi bo ob odprtu ali ustvaritvi datoteke privzeto prikazan - + Show axis cross by default Privzeto prikaži križ osi - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files V spodnjem levem vogalu odprtih datotek bosta prikazana čas, porabljen za zadnje opravilo, in gostota sličic - + Show counter of frames per second Pokaži števec slik na sekundo - + Rendering Izrisovanje - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2899,22 +2899,22 @@ Changing this option requires a restart of the application. Za spremembo te možnosti je treba program ponovno zagnati. - + Use software OpenGL Uporabi OpenGL programje - + Use OpenGL VBO (Vertex Buffer Object) Uporabi OpenGL VBO (medpomnilnik oglišč) - + Render cache Izrisni predpomnilnik - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2937,7 +2937,17 @@ od grafičnih nepravilnosti do hroščev sesipanja GPE. Ne pozabite javiti, da je bila ta zmožnost omogočena, ko boste iskali podporo na FreeCAD-ovih forumih - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2954,92 +2964,92 @@ razen predpomnilnika korenskega vozlišča na grafu torišča. S tem dobite hitr izrisovanje, vendar počasnejše odzivanje na spremembe torišča. - + Auto Samodejno - + Distributed Porazdeljeno - + Centralized Usrediščeno - + Anti-Aliasing Glajenje robov - + What kind of multisample anti-aliasing is used Kakšno glajenje robov z večkratnim vzorčenjem je uporabljeno - + None Brez - + Line Smoothing Glajenje črt - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Prozorni predmeti: - + Render types of transparent objects Način izrisovanja prozornih predmetov - + One pass Enkratni prelet - + Backface pass Prelet čez hrbtne ploskve - + Marker size: Velikost oznake: - + Size of vertices in the Sketcher, TechDraw and other workbenches Velikost oglišč v Očrtovalniku (Sketcher), TehRisbah (TechDraw) in drugih delovnih okoljih - + Eye to eye distance for stereo modes Medočesna razdalja v dvovidnih načinih - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3048,48 +3058,48 @@ Ta vredost predstavlja količnik, ki bo pomnožen z velikostjo očrtnega kvadra trenutno prikazanega prostorskega predmeta. - + Backlight is enabled with the defined color Protisvetloba je omogočena z določeno barvo - - + + Backlight color Barva protisvetlobe - + Intensity Jakost - + Intensity of the backlight Jakost protisvetlobe - + Camera type Vrsta kamere - + Objects will appear in a perspective projection Predmeti bodo prikazani v perspektivni preslikavi - + Perspective renderin&g Izris v p&erspektivi - + Objects will be projected in orthographic projection Predmeti bodo preslikani v pravokotno preslikavo - + Or&thographic rendering Pravoko&tni izris @@ -3101,57 +3111,57 @@ očrtnega kvadra trenutno prikazanega prostorskega predmeta. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Glajenje robov - + Open a new viewer or restart %1 to apply anti-aliasing changes. Odprite nov pregledovalnik ali ponovno zaženite %1, da uporabite spremembe glajenja robov. @@ -4042,7 +4052,7 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Krmarjenje @@ -4114,7 +4124,7 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Default - Privzeti + Privzeto @@ -4128,68 +4138,78 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Barva - + Base color for all elements Osnovna barva vseh predmetov - + Rotation center indicator Označba vrtišča - + Sphere size Velikost krogle - + Color and transparency Barva in prozornost - + The size of the rotation center indicator Velikost označbe vrtišča - + The color of the rotation center indicator Barva označbe vrtišča - + 3D Navigation 3D krmarjenje - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Naštej nastavitve miškinih tipk za vsako izbrano nastavitev krmarjenja. Izberite nastavitev in nato pritisnite tipko za pregled navedenih nastavitev. - + Mouse... Miška … - + Navigation settings set Nabor nastavitev krmarjenja - + Orbit style Slog vrtenja - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4200,136 +4220,136 @@ Sukajoči pogled: del se bo sukal okrog osi z. (z omejitvami osi). Prostosukajoči pogled: del se bo sukal okoli osi z. - + Turntable Sukajoča pogled - + Trackball Vrtilna krogla - + Free Turntable Prostosukajoča plošča - + Rotation mode Sukalni način - + Rotations in 3D will use current cursor position as center for rotation Pri prostorskem sukanju bo za vrtišče izbran trenutni položaj kazalke - + Window center Sredina okna - + Drag at cursor Povleci h kazalki - + Object center Središče predmeta - + Default camera orientation Privzeta usmeritev kamere - + Default camera orientation when creating a new document or selecting the home view Privzeta usmeritev kamere pri ustvarjanju novega dokumenta ali izbiri domačega pogleda - + Camera zoom Preodmičenje - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Nastavi vidno polje kamere za nove dokumente. Vrednost predstavlja premer krogle, včrtane v zaslon. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Trajanje časovno omejenih animacij krmarjenja - + Animation duration Dolžina animacije - + The duration of navigation animations in milliseconds Trajanje animacij krmarjenja, merjeno v milisekundah - + Zoom step Korak preodmičenja - + Zoom operations will be performed at position of mouse pointer Preodmičenje se bo izvajalo okrog položaja kazalke - + Zoom at cursor Preodmičenje ob kazalki - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Za koliko se bo spremenila povečava. Korak preodmičenja "1" pomeni količnik velikost 7,5 za vsak korak. - + Direction of zoom operations will be inverted Smer preodmičenja bo obrnjena - + Invert zoom Obrni preodmičenje - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4338,57 +4358,57 @@ Vpliva le na slog krmarjenja s kretnjami. S to nastavitvijo nagibanje z miško ni onemogočeno. - + Disable touchscreen tilt gesture Onemogoči potezo nagibanja na zaslonu na dotik - + Isometric Izometrično - + Dimetric Dvomeren - + Trimetric Trimetrično - + Top Zgoraj - + Front Spredaj - + Left Levo - + Right Desno - + Rear Zadaj - + Bottom Spodaj - + Custom Po meri @@ -4398,7 +4418,7 @@ S to nastavitvijo nagibanje z miško ni onemogočeno. General - Splošno + Splošne nastavitve @@ -5463,7 +5483,7 @@ The 'Status' column shows whether the document could be recovered. Dialog - Pogovorno okno + Pog. okno @@ -5629,7 +5649,7 @@ izbrani pred odprtjem tega pogovrnega okna Dialog - Pog. okno + Pogovorno okno @@ -5644,7 +5664,7 @@ izbrani pred odprtjem tega pogovrnega okna Gui::DockWnd::PropertyDockView - + Property View Lastnostni prikaz @@ -6109,15 +6129,15 @@ Ali želite shraniti spremembe? PDF zapis - + Graphviz format Graphviz format + - Export graph Izvozi graf @@ -6700,14 +6720,14 @@ Kako želite nadaljevati? Gui::PropertyView - - + + View Pogled - - + + Data Podatki @@ -6866,7 +6886,7 @@ Ali želite končati ne da bi shranili podatke? none - nobeden + brez @@ -7023,7 +7043,7 @@ Ali želite navesti drugo mapo? Angle - Kót + Kot @@ -7031,7 +7051,7 @@ Ali želite navesti drugo mapo? Position - Položaj + Position @@ -7230,7 +7250,7 @@ Ali želite navesti drugo mapo? Press left mouse button - Pritisnite levo miškino tipko + Pritisnite levi miškin gumb @@ -7682,22 +7702,22 @@ Ali želite navesti drugo mapo? Gui::View3DInventor - + Export PDF Izvozi v PDF - + PDF file Datoteka PDF - + Opening file failed Odpiranje datoteke ni uspelo - + Can't open file '%1' for writing. Datoteke '%1' ni mogoče odpreti za pisanje. @@ -7932,7 +7952,7 @@ Ali želite navesti drugo mapo? General - Splošne nastavitve + Splošno @@ -7957,45 +7977,45 @@ Ali želite navesti drugo mapo? Python - - - + + + Unknown filetype Neznana vrsta datoteke - - + + Cannot open unknown filetype: %1 Neznane vrste datoteke ni mogoče odpreti: %1 - + Export failed Izvažanje spodletelo - + Cannot save to unknown filetype: %1 Ni mogoče shraniti v neznano vrsto datoteke: %1 - + Workbench failure Napaka delovnega okolja - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8046,8 +8066,8 @@ Ali želite navesti drugo mapo? Izvažanje PDF... - + Unsaved document Neshranjen dokument @@ -8617,7 +8637,7 @@ Odprite brskalnik in vtipkajte: http://localhost:%1. Datoteke %1 ni mogoče najti v %2 niti v %3 - + Navigation styles Slogi krmarjenja @@ -8918,8 +8938,8 @@ bodo izgubljene. Preklopi prekrivanje - + Toggle floating window Preklopi plavajoče okno @@ -8935,192 +8955,187 @@ bodo izgubljene. Če želite skriti namig, pritisnice ESC - + UI Vmesnik - + Tree view Drevesni prikaz - + Item background color Barva ozadja predmeta - + Item background padding Item background padding - + Resizable columns Stolpci z nastavljivo širino - - Show item checkbox - Prikaži označno polje predmeta - - - + Hide extra column Skrij dodatni stolpec - + Hide scroll bar Skrij drsni trak - + Hide header Skrij glavo - + IconSize Velikost ikon - + FontSize Velikost pisave - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10053,8 +10068,8 @@ bodo izgubljene. Ustvari nov, prazen dokument - + Unnamed Neimenovan @@ -11237,7 +11252,7 @@ Namenjen je razpostavitivi predmetov s topografskimi oblikami dela, kot so Osnov Fullscreen - Celozaslonsko + Celozaslonski način @@ -11483,7 +11498,7 @@ Namenjen je razpostavitivi predmetov s topografskimi oblikami dela, kot so Osnov Fullscreen - Celozaslonski način + Celozaslonsko @@ -12364,12 +12379,12 @@ ob zagodu FreeCAD-a NaviCubeDraggableCmd - + Movable navigation cube Premična krmilna kocka - + Drag and place NaviCube Povleci in umesti krmilno kocko @@ -12377,32 +12392,32 @@ ob zagodu FreeCAD-a NaviCubeSettings - + FRONT SPREDAJ - + TOP ZGORAJ - + RIGHT DESNO - + REAR ZADAJ - + BOTTOM SPODAJ - + LEFT LEVO @@ -12826,7 +12841,7 @@ bo pozdravno okno prikazano Name - Ime + Naziv @@ -12889,47 +12904,47 @@ bo pozdravno okno prikazano Po meri (%1px) - + Combo View Sestavljen pogled - + TreeView and PropertyView Drevesni prikaz in Lastnostni prikaz - + Preference Pack Name Ime prednastavitvenega svežnja - + Tags Značke - + Apply Uveljavi - + Apply the %1 preference pack Uveljavi prednastavitveni sveženj %1 - + Choose a FreeCAD config file to import Za uvažanje izberite FreeCADovo nastavitveno datoteko - + File exists Datoteka obtsaja - + A preference pack with that name already exists. Overwrite? Prednastavitveni sveženj s tem imenom že obstaja. Ali ga želite pripisati? diff --git a/src/Gui/Language/FreeCAD_sr-CS.ts b/src/Gui/Language/FreeCAD_sr-CS.ts index b94886d38e..36f49f59df 100644 --- a/src/Gui/Language/FreeCAD_sr-CS.ts +++ b/src/Gui/Language/FreeCAD_sr-CS.ts @@ -117,7 +117,7 @@ Uredi - + Import Uvezi @@ -188,8 +188,8 @@ Položaj - + Transform Pomeri @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Zadaj nasumičnu boju @@ -421,42 +421,42 @@ EditMode - + Default Podrazumevano - + The object will be edited using the mode defined internally to be the most appropriate for the object type Objekat će biti uređivan korišćenjem interno definisanog režima koji je najprikladniji za taj tip objekta - + Transform Pomeri - + The object will have its placement editable with the Std TransformManip command Objekat će imati svoj položaj koji se može uređivati pomoću komande Std TransformManip - + Cutting Cutting - + This edit mode is implemented as available but currently does not seem to be used by any object Ovaj režim uređivanja je implementiran kao dostupan, ali trenutno izgleda da ga nijedan objekat ne koristi - + Color Boja - + The object will have the color of its individual faces editable with the Part FaceColors command Objekat će imati boju svojih pojedinačnih lica koja se može uređivati komandom Part FaceColors @@ -788,37 +788,37 @@ dok pritiskš levim ili desnim tasterom i pomeraš miša gore ili dole Gui::Dialog::CameraDialog - + Camera settings Podešavanja kamere - + Orientation Orijentacija - + Q0 Q1 - + Q1 Q2 - + Q2 Q2 - + Q3 Q3 - + Current view Trenutni pogled @@ -2458,72 +2458,72 @@ Navedi neku drugu fasciklu. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Resetuj stranu '%1'... - + Resets the user settings for the page '%1' Resetuje korisnička podešavanja' za stranu '%1' - + Reset group '%1'... Resetuj grupu '%1'... - + Resets the user settings for the group '%1' Resetuje korisnička podešavanja' za grupu '%1' - + Reset all... Resetuj sve... - + Resets the user settings entirely U potpunosti resetuje korisnička podešavanja - + Clear user settings Obriši korisničke postavke - + Do you want to clear all your user settings? Da li želiš da obrišeš sva korisnička podešavanja? - + If you agree all your settings will be cleared. Ako potvrdiš, sva podešavanja će biti izbrisana. - + Wrong parameter Pogrešan parametar - + Restart required Potrebno je ponovo pokrenuti sistem - + You must restart FreeCAD for changes to take effect. Moraš ponovo pokrenuti FreeCAD da bi promene stupile na snagu. - + Restart now Ponovo pokreni sada - + Restart later Ponovo pokreni kasnije @@ -2860,35 +2860,35 @@ in the corner -- in % of height/width of viewport u uglu -- u % visine/širine prozora prikaza - + Axis cross will be shown by default at file opening or creation Podesi da se glavni koordinatni sistem uvek prikazuje u 3D pogledu - + Show axis cross by default Prikaži glavni koordinatni sistem - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Vreme potrebno za poslednju operaciju i rezultujuća brzina kadrova biće prikazano u donjem levom uglu otvorenih datoteka - + Show counter of frames per second Prikaži brojač kadrova u sekundi - + Rendering Renderovanje - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. Promena ove opcije zahteva ponovno pokretanje programa. - + Use software OpenGL Koristi OpenGL program - + Use OpenGL VBO (Vertex Buffer Object) Koristi OpenGL VBO (Vertex Buffer Object) - + Render cache Render keš - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2935,7 +2935,17 @@ problema, od grafičkih anomalija do grešaka u padu GPU-a. Ne zaboravite da prijavite ovu postavku kao omogućenu kada tražite podršku na FreeCAD forumima - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2952,92 +2962,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Automatski - + Distributed Raspodeljen - + Centralized Centralizovan - + Anti-Aliasing Anti-aliasing - + What kind of multisample anti-aliasing is used Koja vrsta smanjivanja nazubljenja ivica se koristi - + None Nijedan - + Line Smoothing Glačanje linije - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Providni objekti: - + Render types of transparent objects Vrste renderovanja providnih objekata - + One pass Jedan prolaz - + Backface pass Pozadinski prolaz - + Marker size: Veličina oznake tačke: - + Size of vertices in the Sketcher, TechDraw and other workbenches Veličina tačaka u Sketcher, Techdraw i ostalim radnim okruženjima - + Eye to eye distance for stereo modes Rastojanje između očiju za stereo režime - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3046,48 +3056,48 @@ Navedena vrednost je koeficijent koji će biti pomnožen sa veličinom graničnog okvira 3D objekta koji je trenutno prikazan. - + Backlight is enabled with the defined color Pozadinsko osvetljenje i njegova boja je omogućeno - - + + Backlight color Boja pozadinskog osveljenja - + Intensity Intenzitet - + Intensity of the backlight Intenzitet pozadinskog osvetljenja - + Camera type Vrsta kamere - + Objects will appear in a perspective projection Objekti će se pojaviti u perspektivi - + Perspective renderin&g Renderovanje perspektive - + Objects will be projected in orthographic projection Objekti će biti projektovani u ortografskoj projekciji - + Or&thographic rendering Ortogonalnо renderovanje @@ -3099,57 +3109,57 @@ veličinom graničnog okvira 3D objekta koji je trenutno prikazan. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Da bi promene anti-aliasing (smanjivanja nazubljenja ivica) stupile na snagu, otvori novi prozor prikaza ili ponovo pokreni %1. @@ -4040,7 +4050,7 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com>Gui::Dialog::DlgSettingsNavigation - + Navigation Navigacija @@ -4126,68 +4136,78 @@ Takođe možete koristiti obrazac: Pera Perić <pera@peric.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Boja - + Base color for all elements Osnovna boja za sve elemente - + Rotation center indicator Indikator centra rotacije - + Sphere size Veličina sfere - + Color and transparency Boja i providnost - + The size of the rotation center indicator Veličina indikatora centra rotacije - + The color of the rotation center indicator Boja indikatora centra rotacije - + 3D Navigation 3D Navigacija - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Funkcije tastera miša za izabrani stil 3D navigacije. Izaberi stil 3D navigacije, a zatim pritisni dugme da vidiš funkcije tastera. - + Mouse... Miš... - + Navigation settings set Stil 3D navigacije miša - + Orbit style Način okretanja orbit - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4198,136 +4218,136 @@ Gramofon: deo će biti rotiran oko z-ose (sa zadanim ograničenjima na osama). Obični gramofon: deo će biti rotiran oko z-ose. - + Turntable Gramofon - + Trackball Trackball - + Free Turntable Obični gramofon - + Rotation mode Režimi rotacije - + Rotations in 3D will use current cursor position as center for rotation 3D rotacija će koristiti trenutni položaj kursora miša kao centar za rotaciju - + Window center Centar prozora - + Drag at cursor Drag at cursor - + Object center Centar objekta - + Default camera orientation Podrazumevana orijentacija kamere - + Default camera orientation when creating a new document or selecting the home view Podrazumevana orijentacija kamere prilikom kreiranja novog dokumenta ili izbora početnog pogleda - + Camera zoom Zumiranje kamere - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Podešava zum kamere za nove dokumente. Vrednost je prečnik sfere koja staje na ekran. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Korak zumiranja - + Zoom operations will be performed at position of mouse pointer Operacije zumiranja će se izvoditi na položaju pokazivača miša - + Zoom at cursor Zumiraj na kursoru - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Koliko će biti zumirano. Korak zumiranja od '1' znači koeficijent od 7,5 za svaki korak zumiranja. - + Direction of zoom operations will be inverted Smer operacije zumiranja će biti obrnut - + Invert zoom Obrnite smer zumiranja - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4336,57 +4356,57 @@ Utiče samo na stil navigacije pokretima. Ovim podešavanjem nije onemogućeno naginjanje miša. - + Disable touchscreen tilt gesture Onemogući naginjanje ekrana osetljivog na dodir - + Isometric Izometrijski - + Dimetric Dimetrijski - + Trimetric Trimetrijski - + Top Odozgo - + Front Spreda - + Left Sleva - + Right Sdesna - + Rear Straga - + Bottom Odozdo - + Custom Sopstvena @@ -5644,7 +5664,7 @@ izabranim objektima pre otvaranja ovog dijaloga Gui::DockWnd::PropertyDockView - + Property View Osobine prikaza @@ -6109,15 +6129,15 @@ Da li želiš da sačuvaš promene? PDF format - + Graphviz format Graphviz format + - Export graph Izvezi grafikon @@ -6700,14 +6720,14 @@ Kako želiš da nastaviš? Gui::PropertyView - - + + View Pogled - - + + Data Podaci @@ -7031,7 +7051,7 @@ Do you want to specify another directory? Position - Položaj + Position @@ -7682,22 +7702,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Izvezi PDF - + PDF file PDF datoteka - + Opening file failed Otvaranje datoteke neuspešno - + Can't open file '%1' for writing. Ne mogu da otvorim datoteku %1 radi upisa. @@ -7957,45 +7977,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Nepoznata vrsta datoteke - - + + Cannot open unknown filetype: %1 Ne mogu otvoriti nepoznatu vrstu datoteke: %1 - + Export failed Izvoz nije uspeo - + Cannot save to unknown filetype: %1 Ne mogu sačuvati nepoznatu vrstu datoteke: %1 - + Workbench failure Otkazivanje radnog okruženja - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ovaj sistem koristi OpenGL %1.%2. FreeCAD zahteva OpenGL 2.0 ili noviji. Nadogradite svoj grafički drajver i/ili karticu po potrebi. - + Invalid OpenGL Version Pogrešna OpenGL verzija @@ -8046,8 +8066,8 @@ Do you want to specify another directory? Izvozim PDF... - + Unsaved document Nesačuvan dokument @@ -8246,7 +8266,7 @@ Da li želiš da nastaviš? New integer item - New integer item + Nova brojčana stavka @@ -8262,13 +8282,13 @@ Da li želiš da nastaviš? New unsigned item - New unsigned item + Nova neoznačena stavka New float item - New float item + Nova stavka sa pokretnim zarezom @@ -8617,7 +8637,7 @@ Otvori pregledač i ukucaj: http://localhost:%1. Ne mogu pronaći datoteku %1 ni u %2 ni u %3 - + Navigation styles Navigacioni stilovi @@ -8918,8 +8938,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8935,199 +8955,194 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Stablo dokumenta - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Kolone promenljive veličine - - Show item checkbox - Prikaži polje za čekiranje stavke - - - + Hide extra column Sakrij dodatnu kolonu - + Hide scroll bar Sakrij kliznu traku - + Hide header Hide header - + IconSize Veličina ikone - + FontSize Veličina fonta - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Sakrij kliznu traku panela Osobine prikaza - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Trajanje animacije (ms) - + Animation curve type Animation curve type Active object - Active object + Aktivni objekat @@ -10053,8 +10068,8 @@ the current copy will be lost. Napravi novi prazan dokument - + Unnamed Bez imena @@ -12129,17 +12144,17 @@ nakon pokretanja FreeCAD-a XY-Plane - XY-Plane + XY ravan XZ-Plane - XZ-Plane + XZ ravan YZ-Plane - YZ-Plane + YZ ravan @@ -12149,7 +12164,7 @@ nakon pokretanja FreeCAD-a Offset: - Offset: + Odmak: @@ -12364,12 +12379,12 @@ nakon pokretanja FreeCAD-a NaviCubeDraggableCmd - + Movable navigation cube Pokretna navigaciona kocka - + Drag and place NaviCube Prevuci i postavi navigacionu kocku @@ -12377,32 +12392,32 @@ nakon pokretanja FreeCAD-a NaviCubeSettings - + FRONT Spreda - + TOP Odozgo - + RIGHT Sdesna - + REAR Straga - + BOTTOM Odozdo - + LEFT Sleva @@ -12644,7 +12659,7 @@ nakon pokretanja FreeCAD-a Default unit system: - Default unit system: + Podrazumevane merne jedinice: @@ -12889,47 +12904,47 @@ prikazati početni ekran Sopstveni (%1px) - + Combo View Kombinovani panel - + TreeView and PropertyView Stablo dokumenta i Osobine prikaza - + Preference Pack Name Ime paketa podešavanja - + Tags Oznake - + Apply Primeni - + Apply the %1 preference pack Primeniti %1 paket podešavanja - + Choose a FreeCAD config file to import Izaberi FreeCAD konfiguracionu datoteku koju hoćeš uvesti - + File exists Datoteka postoji - + A preference pack with that name already exists. Overwrite? Paket podešavanja sa tim imenom već postoji. Zameni? diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index e6698081fa..9315b6f2db 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -117,7 +117,7 @@ Уреди - + Import Увези @@ -188,8 +188,8 @@ Положај - + Transform Помери @@ -233,7 +233,7 @@ Set Random Color - Set Random Color + Задај насумичну боју @@ -421,42 +421,42 @@ EditMode - + Default Подразумевано - + The object will be edited using the mode defined internally to be the most appropriate for the object type Објекат ће бити уређиван коришћењем интерно дефинисаног режима који је најприкладнији за тај тип објекта - + Transform Помери - + The object will have its placement editable with the Std TransformManip command Објекат ће имати свој положај који се може уређивати помоћу команде Std TransformManip - + Cutting Cutting - + This edit mode is implemented as available but currently does not seem to be used by any object Овај режим уређивања је имплементиран као доступан, али тренутно изгледа да га ниједан објекат не користи - + Color Боја - + The object will have the color of its individual faces editable with the Part FaceColors command Објекат ће имати боју својих појединачних лица која се може уређивати командом Part FaceColors @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Подешавања камере - + Orientation Оријентација - + Q0 Q1 - + Q1 Q2 - + Q2 Q2 - + Q3 Q3 - + Current view Тренутни поглед @@ -2458,72 +2458,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Ресетуј страну '%1'... - + Resets the user settings for the page '%1' Ресетује корисничка подешавања' за страну '%1' - + Reset group '%1'... Ресетуј групу '%1'... - + Resets the user settings for the group '%1' Ресетује корисничка подешавања' за групу '%1' - + Reset all... Ресетуј све... - + Resets the user settings entirely У потпуности ресетује корисничка подешавања - + Clear user settings Обриши корисничке поставке - + Do you want to clear all your user settings? Да ли желиш да обришеш сва корисничка подешавања? - + If you agree all your settings will be cleared. Ако потврдиш, cва подешавања ће бити избриcана. - + Wrong parameter Погрешан параметар - + Restart required Потребно је поново покренути систем - + You must restart FreeCAD for changes to take effect. Мораш поново покренути FreeCAD да би промене ступиле на снагу. - + Restart now Поново покрени сада - + Restart later Поново покрени касније @@ -2860,35 +2860,35 @@ in the corner -- in % of height/width of viewport у углу -- у % висине/ширине прозора приказа - + Axis cross will be shown by default at file opening or creation Подеси да се главни координатни систем увек приказује у 3D погледу - + Show axis cross by default Прикажи главни координатни систем - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Време потребно за последњу операцију и резултујућа брзина кадрова биће приказано у доњем левом углу отворених датотека - + Show counter of frames per second Прикажи бројач кадрова у секунди - + Rendering Рендеровање - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2897,22 +2897,22 @@ Changing this option requires a restart of the application. Промена ове опције захтева поновно покретање програма. - + Use software OpenGL Користи OpenGL програм - + Use OpenGL VBO (Vertex Buffer Object) Користи OpenGL VBO (Vertex Buffer Object) - + Render cache Рендер кеш - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2935,7 +2935,17 @@ VBO-ови нуде значајно повећање перформанси ј пријавите ову поставку као омогућену када тражите подршку на FreeCAD форумима - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2952,92 +2962,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Аутоматски - + Distributed Расподељен - + Centralized Централизован - + Anti-Aliasing Anti-Aliasing - + What kind of multisample anti-aliasing is used Која врста смањивања назубљења ивица се користи - + None Ниједан - + Line Smoothing Глачање линије - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Провидни објекти: - + Render types of transparent objects Врсте рендеровања провидних објеката - + One pass Један пролаз - + Backface pass Позадински пролаз - + Marker size: Величина ознаке тачке: - + Size of vertices in the Sketcher, TechDraw and other workbenches Величина темена у Sketcher, TechDraw и осталим радним окружењима - + Eye to eye distance for stereo modes Растојање између очију за стерео режиме - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3046,48 +3056,48 @@ bounding box size of the 3D object that is currently displayed. величином граничног оквира 3Д објекта који је тренутно приказан. - + Backlight is enabled with the defined color Позадинско осветљење и његова боја је омогућено - - + + Backlight color Боја позадинског освељења - + Intensity Интензитет - + Intensity of the backlight Интензитет позадинcког осветљења - + Camera type Врста камере - + Objects will appear in a perspective projection Објекти ће се појавити у перспективи - + Perspective renderin&g Рендеровање перспективе - + Objects will be projected in orthographic projection Објекти ће бити пројектовани у ортографској пројекцији - + Or&thographic rendering Ортогонални рендеринг @@ -3099,57 +3109,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Anti-aliasing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Да би промене anti-aliasing (смањивања назубљења ивица) ступиле на снагу, отвори нови прозор приказа или поново покрени %1. @@ -4040,7 +4050,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Навигација @@ -4126,68 +4136,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Боја - + Base color for all elements Основна боја за све елементе - + Rotation center indicator Индикатор центра ротације - + Sphere size Величина сфере - + Color and transparency Боја и провидност - + The size of the rotation center indicator Величина индикатора центра ротације - + The color of the rotation center indicator Боја индикатора центра ротације - + 3D Navigation 3Д Навигација - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Функције тастера миша за изабрани стил 3Д навигације. Изабери стил 3Д навигације, а затим притисни дугме да видиш функције тастера. - + Mouse... Миш... - + Navigation settings set Стил 3Д навигације миша - + Orbit style Начин окретања орбит - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4198,136 +4218,136 @@ Trackball: померање миша хоризонтално ће ротира Обични грамофон: део ће бити ротиран око z-осе. - + Turntable Грамофон - + Trackball Trackball - + Free Turntable Обични грамофон - + Rotation mode Режими ротације - + Rotations in 3D will use current cursor position as center for rotation 3Д ротација ће користити тренутну положај курсора миша као центар за ротацију - + Window center Центар прозора - + Drag at cursor Drag at cursor - + Object center Центар објекта - + Default camera orientation Подразумевана оријентација камере - + Default camera orientation when creating a new document or selecting the home view Подразумевана оријентација камере приликом креирања новог документа или избора почетног погледа - + Camera zoom Зумирање камере - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Подешава зум камере за нове документе. Вредност је пречник сфере која стаје на екран. - + mm мм - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Корак зумирања - + Zoom operations will be performed at position of mouse pointer Операције зумирања ће се изводити на положају показивача миша - + Zoom at cursor Зумирај на курсору - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Колико ће бити зумирано. Корак зумирања од '1' значи коефицијент од 7,5 за сваки корак зумирања. - + Direction of zoom operations will be inverted Смер операције зумирања ће бити обрнут - + Invert zoom Обрни смер зумирања - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4336,57 +4356,57 @@ Mouse tilting is not disabled by this setting. Овим подешавањем није онемогућено нагињање миша. - + Disable touchscreen tilt gesture Онемогући нагињање екрана осетљивог на додир - + Isometric Изометријски - + Dimetric Диметријски - + Trimetric Триметријски - + Top Одозго - + Front Спреда - + Left Слева - + Right Сдесна - + Rear Страга - + Bottom Одоздо - + Custom Сопствена @@ -5644,7 +5664,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Особине приказа @@ -6109,15 +6129,15 @@ Do you want to save your changes? PDF формат - + Graphviz format Graphviz формат + - Export graph Извези графикон @@ -6700,14 +6720,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Поглед - - + + Data Подаци @@ -7031,7 +7051,7 @@ Do you want to specify another directory? Position - Положај + Position @@ -7682,22 +7702,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Извези PDF - + PDF file PDF датотека - + Opening file failed Отварање датотеке неуcпешно - + Can't open file '%1' for writing. Не могу да отворим датотеку %1 ради уписа. @@ -7957,45 +7977,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Непозната врста датотеке - - + + Cannot open unknown filetype: %1 Не могу отворити непознату врсту датотеке: %1 - + Export failed Извоз није успео - + Cannot save to unknown filetype: %1 Не могу сачувати непознату врсту датотеке: %1 - + Workbench failure Отказивање радног окружења - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Овај систем користи OpenGL %1.%2. FreeCAD захтева OpenGL 2.0 или новији. Надоградите свој графички драјвер и/или картицу по потреби. - + Invalid OpenGL Version Погрешна OpenGL верзија @@ -8046,8 +8066,8 @@ Do you want to specify another directory? Извозим PDF... - + Unsaved document Несачуван документ @@ -8246,7 +8266,7 @@ Do you want to continue? New integer item - New integer item + Нова бројчана ставка @@ -8262,13 +8282,13 @@ Do you want to continue? New unsigned item - New unsigned item + Нова неозначена ставка New float item - New float item + Нова ставка са покретним зарезом @@ -8617,7 +8637,7 @@ Please open a browser window and type in: http://localhost:%1. Не могу пронаћи датотеку %1 ни у %2 ни у %3 - + Navigation styles Навигациони стилови @@ -8918,8 +8938,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8935,199 +8955,194 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Стабло документа - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Колоне променљиве величине - - Show item checkbox - Прикажи поље за чекирање ставке - - - + Hide extra column Сакриј додатну колону - + Hide scroll bar Сакриј клизну траку - + Hide header Hide header - + IconSize Величина иконе - + FontSize Величина фонта - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Сакриј клизну траку панела Особине приказа - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Трајање анимације (мс) - + Animation curve type Animation curve type Active object - Active object + Активни објекат @@ -10053,8 +10068,8 @@ the current copy will be lost. Направи нови празан документ - + Unnamed Без имена @@ -12129,17 +12144,17 @@ after FreeCAD launches XY-Plane - XY-Plane + XY раван XZ-Plane - XZ-Plane + XZ раван YZ-Plane - YZ-Plane + YZ раван @@ -12149,7 +12164,7 @@ after FreeCAD launches Offset: - Offset: + Одмак: @@ -12364,12 +12379,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Покретна навигациона коцка - + Drag and place NaviCube Превуци и постави навигациону коцку @@ -12377,32 +12392,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT Спреда - + TOP Одозго - + RIGHT Сдесна - + REAR Страга - + BOTTOM Одоздо - + LEFT Слева @@ -12644,7 +12659,7 @@ after FreeCAD launches Default unit system: - Default unit system: + Подразумеване мерне јединице: @@ -12889,47 +12904,47 @@ display the splash screen Сопствени (%1px) - + Combo View Комбиновани панел - + TreeView and PropertyView Стабло документа и Особине приказа - + Preference Pack Name Име пакета подешавања - + Tags Ознаке - + Apply Примени - + Apply the %1 preference pack Применити %1 пакет подешавања - + Choose a FreeCAD config file to import Изабери FreeCAD конфигурациону датотеку коју хоћеш увести - + File exists Датотека постоји - + A preference pack with that name already exists. Overwrite? Пакет подешавања са тим именом већ постоји. Замени? diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 9a23137fcb..9542fd69ee 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -80,7 +80,7 @@ Run test cases to verify console messages - Run test cases to verify console messages + @@ -117,7 +117,7 @@ Redigera - + Import Importera @@ -188,8 +188,8 @@ Placering - + Transform Omvandla @@ -421,42 +421,42 @@ EditMode - + Default Standard - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Omvandla - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Skär - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Färg - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamerainställningar - + Orientation Orientering - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Aktuell vy @@ -2459,72 +2459,72 @@ Ange en annan katalog. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Återställ alla... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Rensa användarinställningar - + Do you want to clear all your user settings? Vill du rensa alla dina användarinställningar? - + If you agree all your settings will be cleared. Om du accepterar kommer alla dina inställningar att raderas. - + Wrong parameter Fel parameter - + Restart required Omstart krävs - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Starta om nu - + Restart later Starta om senare @@ -2861,36 +2861,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Axelkors kommer att visas som standard vid fil öppna eller skapa - + Show axis cross by default Visa axelkors som standard - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Tid som behövs för senaste operation och resulterande bildfrekvens visas i nedre vänstra hörnet i öppnade filer - + Show counter of frames per second Visa räknaren för bilder per sekund - + Rendering Rendering - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2899,22 +2899,22 @@ Changing this option requires a restart of the application. För att ändra detta alternativ krävs en omstart av programmet. - + Use software OpenGL Använd mjukvaru OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Använd OpenGL (VertexBufferObject) - + Render cache Renderingscache - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2937,7 +2937,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2954,92 +2964,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Automatisk - + Distributed Distribuerad - + Centralized Centraliserad - + Anti-Aliasing Kantutjämning - + What kind of multisample anti-aliasing is used Vilken typ av multisamplad anti-aliasing används - + None Inget - + Line Smoothing Linjeutjämning - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Transparenta objekt: - + Render types of transparent objects Rendera typer av transparenta objekt - + One pass Ett pass - + Backface pass Backface pass - + Marker size: Markörstorlek: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Ögonavstånd för stereolägen - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3048,48 +3058,48 @@ Det angivna värdet är en faktor som kommer att multipliceras med storleken på det 3D-objekt som visas. - + Backlight is enabled with the defined color Bakgrundsbelysningen är aktiverad med den definierade färgen - - + + Backlight color Bakgrundsbelysningens färg - + Intensity Intensitet - + Intensity of the backlight Bakgrundsbelysningens Intensitet - + Camera type Kameratyp - + Objects will appear in a perspective projection Objekt kommer att visas i en perspektiv projektion - + Perspective renderin&g Perspektivrenderin&g - + Objects will be projected in orthographic projection Objekt kommer att projiceras i ortografisk projektion - + Or&thographic rendering Or&tografisk rendering @@ -3101,57 +3111,57 @@ storleken på det 3D-objekt som visas. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Kantutjämning - + Open a new viewer or restart %1 to apply anti-aliasing changes. Öppna ett nytt fönster eller starta om %1 för att tillämpa ändringar för kantutjämning. @@ -4042,7 +4052,7 @@ Du kan också använda formuläret: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navigering @@ -4128,68 +4138,78 @@ Du kan också använda formuläret: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Färg - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation 3D Navigering - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Lista musknappskonfigurationer för varje vald navigeringsinställning. Välj en uppsättning och tryck sedan på knappen för att visa nämnda konfigurationer. - + Mouse... Mus... - + Navigation settings set Navigeringsinställningar inställda - + Orbit style Orbit stil - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4200,193 +4220,193 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Skivtallrik - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Rotationsläge - + Rotations in 3D will use current cursor position as center for rotation Rotationer i 3D kommer att använda aktuell markörposition som centrum för rotation - + Window center Fönster mitt - + Drag at cursor Drag vid muspekaren - + Object center Objekt centrum - + Default camera orientation Standard kamerainriktning - + Default camera orientation when creating a new document or selecting the home view Standard kamerainriktning när du skapar ett nytt dokument eller väljer hemvyn - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Ställer in kamerans zoom för nya dokument. Värdet är sfärens diameter som passar på skärmen. - + mm mm - + Animations Animationer - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoomsteg - + Zoom operations will be performed at position of mouse pointer Zoomoperationer kommer att utföras vid muspekarens position - + Zoom at cursor Zooma vid markören - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Hur mycket kommer att zoomas. Zoomsteg '1' betyder en faktor på 7,5 för varje zoomsteg. - + Direction of zoom operations will be inverted Zoomoperationernas riktning kommer att inverteras - + Invert zoom Invertera zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. Förhindrar lutning av vy vid två-fingers-zoomning. Påverkar endast gestnavigeringsstil, vylutning med musen avaktiveras inte av denna inställning. - + Disable touchscreen tilt gesture Avaktivera lutning med gester på pekskärm - + Isometric Isometrisk - + Dimetric Dimetrisk - + Trimetric Trimetrisk - + Top Topp - + Front Front - + Left Vänster - + Right Höger - + Rear Bak - + Bottom Botten - + Custom Anpassad @@ -5642,7 +5662,7 @@ som ursprungligen valts innan du öppnar denna dialogruta Gui::DockWnd::PropertyDockView - + Property View Egenskapsvy @@ -6107,15 +6127,15 @@ Vill du spara ändringarna? PDF-format - + Graphviz format Graphviz format + - Export graph Exportera graf @@ -6698,14 +6718,14 @@ Hur vill du fortsätta? Gui::PropertyView - - + + View Vy - - + + Data Data @@ -7680,22 +7700,22 @@ Vill du ange en annan katalog? Gui::View3DInventor - + Export PDF Exportera PDF - + PDF file PDF-fil - + Opening file failed Fel vid filöppning - + Can't open file '%1' for writing. Kan inte öppna filen '%1' för skrivning. @@ -7955,45 +7975,45 @@ Vill du ange en annan katalog? Python - - - + + + Unknown filetype Okänd filtyp - - + + Cannot open unknown filetype: %1 Kan inte öppna okänd filtyp: %1 - + Export failed Exportering misslyckades - + Cannot save to unknown filetype: %1 Kan inte spara till okänd filtyp: %1 - + Workbench failure Fel på arbetsbänk - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8044,8 +8064,8 @@ Vill du ange en annan katalog? Exporterar PDF ... - + Unsaved document Osparat dokument @@ -8615,7 +8635,7 @@ Please open a browser window and type in: http://localhost:%1. Kan inte finna fil %1, varken i %2 eller i %3 - + Navigation styles Navigationsstilar @@ -8916,8 +8936,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8933,192 +8953,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Trädvy - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10051,8 +10066,8 @@ the current copy will be lost. Skapa ett nytt tomt dokument - + Unnamed Namnlös @@ -12360,12 +12375,12 @@ vid start av FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12373,32 +12388,32 @@ vid start av FreeCAD NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT HÖGER - + REAR REAR - + BOTTOM BOTTOM - + LEFT VÄNSTER @@ -12885,47 +12900,47 @@ visa startskärm Anpassad (%1px) - + Combo View Kombinerad vy - + TreeView and PropertyView TrädVy och EgenskapsVy - + Preference Pack Name Preference Pack Name - + Tags Taggar - + Apply Verkställ - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Välj en FreeCAD-konfigurationsfil att importera - + File exists Filen existerar - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 905673a44b..5a190a417c 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -117,7 +117,7 @@ Düzenle - + Import İçe aktar @@ -188,8 +188,8 @@ Yerleşim - + Transform Dönüştür @@ -421,42 +421,42 @@ EditMode - + Default Varsayılan - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Dönüştür - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Kesme - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Renk - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Kamera ayarları - + Orientation Yönlendirme - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Geçerli görünüm @@ -2459,72 +2459,72 @@ Lütfen başka bir dizin belirtin. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Açık kullanıcı ayarları - + Do you want to clear all your user settings? Tüm kullanıcı ayarlarınızı temizlemek istiyor musunuz? - + If you agree all your settings will be cleared. Kabul ederseniz tüm ayarları temizlenir. - + Wrong parameter Yanlış parametre - + Restart required Restart required - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2860,36 +2860,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Eksen çizgileri, dosya açma veya oluşturmada varsayılan olarak görünecek - + Show axis cross by default Eksen çizgilerini varsayılan olarak göster - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Son işlem için gereken süre ve sonuçta oluşan kare hızı, açılan dosyalarda sol alt köşede gösterilecek - + Show counter of frames per second Kare/sn sayacını göster - + Rendering Görsel İşleme - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2898,22 +2898,22 @@ Changing this option requires a restart of the application. Bu seçeneğin değiştirilmesi, uygulamanın yeniden başlatılmasını gerektirir. - + Use software OpenGL Yazılımsal OpenGL kullan - + Use OpenGL VBO (Vertex Buffer Object) OpenGL VBO (Uç Tampon Nesnesi) kullan - + Render cache Görsel İşleme önbelleği - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2936,7 +2936,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2953,92 +2963,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Otomatik - + Distributed Dağıtılmış - + Centralized Merkezileştirilmiş - + Anti-Aliasing Kenar Yumuşatma - + What kind of multisample anti-aliasing is used Kullanılan çok örneklemeli kenar düzeltme türü - + None Hiçbiri - + Line Smoothing Yumuşatma Yok - + MSAA 2x MSAA 2 x - + MSAA 4x MSAA 4 x - + MSAA 8x MSAA 8 x - + Transparent objects: Şeffaf nesneler: - + Render types of transparent objects Şeffaf nesnelerin görüntü işleme türleri - + One pass Tek geçiş - + Backface pass Arka yüz geçişi - + Marker size: İşaretci boyutu: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Stereo kipler için iki göz arası mesafe - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3047,48 +3057,48 @@ Belirlenen değer, şuan görüntülenen 3B nesnenin sınırlama çerçevesi boyutu ile çoğaltılacak bir etkendir. - + Backlight is enabled with the defined color Arka ışık, tanımlanan renkle etkinleştirilir - - + + Backlight color Arka ışık rengi - + Intensity Yoğunluk - + Intensity of the backlight Arka ışığın yoğunluğu - + Camera type kamera tipi - + Objects will appear in a perspective projection Nesneler perspektif görünümde görünecek - + Perspective renderin&g Perspektif işleme - + Objects will be projected in orthographic projection Nesneler ortografik gösterimde gösterilecek - + Or&thographic rendering Or&tografik işle (renderla) @@ -3100,57 +3110,57 @@ Belirlenen değer, şuan görüntülenen 3B nesnenin sınırlama Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Kenar Yumuşatma - + Open a new viewer or restart %1 to apply anti-aliasing changes. %1 Kenar yumuşatma değişikliklerini uygulamak için yeni bir görüntüleyici açın veya yeniden başlatın. @@ -4041,7 +4051,7 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Gezinme @@ -4127,68 +4137,78 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Renk - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation 3D Gezinme - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Seçilen her gezinti ayarı için fare düğmesi yapılandırmalarını listele. Bahsedilen yapılandırmaları görmek için bir ayar seçin ve sonra düğmeye basın. - + Mouse... Fare... - + Navigation settings set Gezinti ayarları ayarı - + Orbit style Yörünge stili - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4199,136 +4219,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Döner tabla - + Trackball Trackball - + Free Turntable Free Turntable - + Rotation mode Döndürme modu - + Rotations in 3D will use current cursor position as center for rotation 3B' daki dönüşler, dönüş merkezi olarak geçerli imleç konumunu kullanacak - + Window center Pencere merkezi - + Drag at cursor İmleç ile sürükle - + Object center Nesne merkezi - + Default camera orientation Varsayılan kamera yönü - + Default camera orientation when creating a new document or selecting the home view Yeni bir belge oluştururken veya ev görünümünü seçerkenki varsayılan kamera yönlendirmesi - + Camera zoom Kamera yakınlaştırma - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Yeni belgeler için kamera yakınlaştırılmasını ayarlar. Değeri, ekrana sığdırılacak kürenin çapıdır. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Yakınlaştırma işlemleri, fare işaretçisi konumunda yapılacak - + Zoom at cursor İmlece yaklaş - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Yakınlaştırma miktarı. 1 yakınlaştırma adımı, adım başına 7.5 katsayı anlamına gelir. - + Direction of zoom operations will be inverted Yakınlaştırma işlemlerinin yönü ters çevrilecek - + Invert zoom Zoomu tersine çevir - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4337,57 +4357,57 @@ Yalnızca hareketle gezinme stilini etkiler. Bu ayarla fareyi eğme devre dışı bırakılmaz. - + Disable touchscreen tilt gesture DokunmatikEkran eğim hareketini devre dışı bırak - + Isometric İzometrik - + Dimetric Dimetrik - + Trimetric Trimetrik - + Top üst - + Front Ön - + Left Sol - + Right Sağ - + Rear Arka - + Bottom Alt - + Custom Özel @@ -5645,7 +5665,7 @@ kutusunu açmadan önce seçilen nesnelerle devam et Gui::DockWnd::PropertyDockView - + Property View Özellik görünümü @@ -6109,15 +6129,15 @@ Do you want to save your changes? PNG biçimi - + Graphviz format Graphviz format + - Export graph Grafiği dışa aktar @@ -6700,14 +6720,14 @@ sağ görünümde %2 nokta seçili. Gui::PropertyView - - + + View Görünüm - - + + Data Veri @@ -7681,22 +7701,22 @@ Başka bir dizin belirlemek ister misiniz? Gui::View3DInventor - + Export PDF PDF olarak dışa aktar - + PDF file PDF dosyası - + Opening file failed Dosya açılamadı - + Can't open file '%1' for writing. Dosya '%1' yazmak için açılamıyor. @@ -7956,45 +7976,45 @@ Başka bir dizin belirlemek ister misiniz? Python - - - + + + Unknown filetype Bilinmeyen dosya türü - - + + Cannot open unknown filetype: %1 Bilinmeyen dosya türünü açamıyor: %1 - + Export failed Dışa aktarım başarısız oldu - + Cannot save to unknown filetype: %1 Bilinmeyen dosya türü kaydedilemiyor: %1 - + Workbench failure Tezgah hatası - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8045,8 +8065,8 @@ Başka bir dizin belirlemek ister misiniz? PDF dışa aktarılıyor... - + Unsaved document Kaydedilmemiş belge @@ -8611,7 +8631,7 @@ Please open a browser window and type in: http://localhost:%1. %1 Dosyası %2 veya %3 içinde bulunamıyor - + Navigation styles Gezinme şekilleri @@ -8912,8 +8932,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8929,192 +8949,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Unsur Ağacı - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10047,8 +10062,8 @@ the current copy will be lost. Yeni, boş bir belge oluştur - + Unnamed İsimsiz @@ -12357,12 +12372,12 @@ etkinleştirilip gösterileceğini seçin NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12370,32 +12385,32 @@ etkinleştirilip gösterileceğini seçin NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12882,47 +12897,47 @@ karşılama ekranını gösterecektir Özel (%1px) - + Combo View Birleşik görünüm - + TreeView and PropertyView AğaçGörünümü ve ÖzellikGörünümü - + Preference Pack Name Tercih Paketi Adı - + Tags Etiketler - + Apply Uygula - + Apply the %1 preference pack %1 tercih paketini uygula - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists Dosya mevcut - + A preference pack with that name already exists. Overwrite? Aynı adlı bir tercih paketi zaten bulunuyor. Üzerine yazılsın mı? diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 6bb179ec58..90b0bbcf00 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -117,7 +117,7 @@ Правка - + Import Імпортувати @@ -188,8 +188,8 @@ Розташувати - + Transform Перетворити @@ -421,42 +421,42 @@ EditMode - + Default За замовчуванням - + The object will be edited using the mode defined internally to be the most appropriate for the object type Об'єкт буде відредаговано з використанням внутрішньо визначеним режимом який найбільш відповідає типу об'єкта - + Transform Перетворити - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Переріз - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Колір - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -788,37 +788,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Налаштування камери - + Orientation Орієнтація - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Поточний вид @@ -2457,72 +2457,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Скинути групу '%1'... - + Resets the user settings for the group '%1' Скидає налаштування користувача для групи '%1' - + Reset all... Скинути все... - + Resets the user settings entirely Скидає налаштування користувача повністю - + Clear user settings Скинути налаштування користувача - + Do you want to clear all your user settings? Ви дійсно хочете очистити всі Ваші настроювання? - + If you agree all your settings will be cleared. Якщо Ви згодні, всі ваші настроювання буде знищено. - + Wrong parameter Неправильний параметр - + Restart required Потрібен перезапуск - + You must restart FreeCAD for changes to take effect. Необхідно перезапустити FreeCAD, щоб зміни набрали сили. - + Restart now Перезапустити зараз - + Restart later Перезапустити пізніше @@ -2859,35 +2859,35 @@ in the corner -- in % of height/width of viewport у куті - у % висоти / ширини вікна перегляду - + Axis cross will be shown by default at file opening or creation Під час відкриття або створення файлу за замовчуванням буде зображено перетин осей - + Show axis cross by default Показати перетин осей за замовчуванням - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files Час, потрібний для останньої операції, та кінцева частота кадрів будуть відображені в нижньому лівому кутку у відкритих файлах - + Show counter of frames per second Показати кількість кадрів в секунду - + Rendering Візуалізація - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2896,22 +2896,22 @@ Changing this option requires a restart of the application. Зміна цього параметра вимагає перезапуску програми. - + Use software OpenGL Використати "програмний" OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Використати OpenGL VBO (Vertex Buffer Object) - + Render cache Кеш рендера - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Автоматично - + Distributed Розподілений - + Centralized Централізований - + Anti-Aliasing Згладжування - + What kind of multisample anti-aliasing is used Який тип багато вибіркового згладжування використано - + None Немає - + Line Smoothing Згладжування ліній - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Обчислення прозорості об'єктів: - + Render types of transparent objects Визначає тип візуалізації прозорих обʼєктів - + One pass Один прохід - + Backface pass Тіньовий прохід - + Marker size: Розмір маркера: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Відстань між очима для стереорежимів - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ bounding box size of the 3D object that is currently displayed. граничного поля 3D-обʼєкта, який зараз показується. - + Backlight is enabled with the defined color Підсвічування увімкнено із вказаним кольором - - + + Backlight color Колір підсвічування - + Intensity Інтенсивність - + Intensity of the backlight Інтенсивність підсвітки - + Camera type Тип камери - + Objects will appear in a perspective projection Встановлює перспективу проєкцію для показу обʼєктів - + Perspective renderin&g Пе&рспективна проєкція - + Objects will be projected in orthographic projection Встановлює ортографічну проєкцію для показу обʼєктів - + Or&thographic rendering Ор&тогональна проєкція @@ -3098,57 +3108,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5пікс - + 7px 7пікс - + 9px 9пікс - + 11px 11пікс - + 13px 13пікс - + 15px 15пікс - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Згладжування - + Open a new viewer or restart %1 to apply anti-aliasing changes. Відкрити новий переглядач або перезапустити %1 для застосування змін згладжування. @@ -4036,7 +4046,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Навігація @@ -4122,68 +4132,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Колір - + Base color for all elements Базовий колір для всіх елементів - + Rotation center indicator Індикатор центру обертання - + Sphere size Розмір сфери - + Color and transparency Колір та прозорість - + The size of the rotation center indicator Розмір індикатора центру обертання - + The color of the rotation center indicator Колір індикатора центру обертання - + 3D Navigation 3D Навігація - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Перелік налаштувань кнопок миші для кожного обраного параметра навігації. Виберіть набір, а потім натисніть кнопку для перегляду конфігурацій. - + Mouse... Мишка... - + Navigation settings set Набір налаштувань навігації - + Orbit style Стиль орбіти - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4194,136 +4214,136 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable Поворотна - + Trackball Трекбол - + Free Turntable Free Turntable - + Rotation mode Режим обертання - + Rotations in 3D will use current cursor position as center for rotation Обертання в 3D буде використовувати поточне положення курсору як центр обертання - + Window center Центр вікна - + Drag at cursor Перетягування під курсором - + Object center Центр обʼєкта - + Default camera orientation Типова орієнтація камери - + Default camera orientation when creating a new document or selecting the home view Визначає типову орієнтацію камери під час створення нового документа або вибору стандартного виду - + Camera zoom Масштабування камери - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Встановлює масштабування камери для нових документів. Значення це діаметр сфери, яка поміститься на екрані. - + mm мм - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Тривалість анімації - + The duration of navigation animations in milliseconds Тривалість анімації навігації в мілісекундах - + Zoom step Крок масштабування - + Zoom operations will be performed at position of mouse pointer Операції масштабування буде виконано на позиції вказівника миші - + Zoom at cursor Масштабування над курсором - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. Визначає коефіцієнт збільшення. Крок масштабування '1' дорівнює коефіцієнту збільшення 7,5. - + Direction of zoom operations will be inverted Напрямок масштабування операцій буде інвертований - + Invert zoom Інвертувати масштабування - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4332,57 +4352,57 @@ Mouse tilting is not disabled by this setting. Нахил миші не вимикається цим параметром. - + Disable touchscreen tilt gesture Вимкнути реакцію на нахил екрану - + Isometric Ізометричний - + Dimetric Диметрія - + Trimetric Триметрія - + Top Згори - + Front Фронтальний - + Left Ліворуч - + Right Направо - + Rear Ззаду - + Bottom Знизу - + Custom Підлаштувати @@ -5640,7 +5660,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Перегляд властивостей @@ -6105,15 +6125,15 @@ Do you want to save your changes? Формат PDF - + Graphviz format Формат Graphviz + - Export graph Експортувати діаграму @@ -6693,14 +6713,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Вид - - + + Data Дані @@ -7675,22 +7695,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Експорт в PDF - + PDF file PDF-файл - + Opening file failed Відкриття файлу не вдалося - + Can't open file '%1' for writing. Не вдалося відкрити файл '%1' для запису. @@ -7950,45 +7970,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype Невідомий тип файлу - - + + Cannot open unknown filetype: %1 Не вдається відкрити невідомий тип файлу: %1 - + Export failed Експорт не вдався - + Cannot save to unknown filetype: %1 Не вдається зберегти в невідомий тип файлу: %1 - + Workbench failure Помилка робочого середовища - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. Ця система працює на OpenGL %1.%2. FreeCAD вимагає OpenGL 2.0 або вище. Будь ласка, оновіть драйвер графіки та/або графічну карту за необхідністю. - + Invalid OpenGL Version Неправильна версія OpenGL @@ -8039,8 +8059,8 @@ Do you want to specify another directory? Експорт в PDF ... - + Unsaved document Незбережений документ @@ -8610,7 +8630,7 @@ Please open a browser window and type in: http://localhost:%1. Не вдається знайти файл %1 ні в %2 , ні в %3 - + Navigation styles Стилі навігації @@ -8912,8 +8932,8 @@ the current copy will be lost. Перемкнути шари - + Toggle floating window Перемкнути плаваюче вікно @@ -8929,192 +8949,187 @@ the current copy will be lost. Натисніть ESC, щоб приховати підказку - + UI Інтерфейс користувача - + Tree view Ієрархія документа - + Item background color Колір фону - + Item background padding Заповнення фону елемента - + Resizable columns Стовпці зі змінним розміром - - Show item checkbox - Show item checkbox - - - + Hide extra column Приховати додатковий стовпець - + Hide scroll bar Приховати панель прокрутки - + Hide header Приховати заголовок - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Приховати панель вкладок - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10047,8 +10062,8 @@ the current copy will be lost. Створює новий порожній документ - + Unnamed Без назви @@ -12358,12 +12373,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube Рухомий куб навігації - + Drag and place NaviCube Drag and place NaviCube @@ -12371,32 +12386,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT ПОПЕРЕДУ - + TOP ВЕРХ - + RIGHT Справа - + REAR Позаду - + BOTTOM Знизу - + LEFT Зліва @@ -12882,47 +12897,47 @@ display the splash screen Власний (%1пікс) - + Combo View Комбінований вид - + TreeView and PropertyView Вид Ієрархії та Властивостей - + Preference Pack Name Імʼя Набору Налаштувань - + Tags Мітки - + Apply Застосувати - + Apply the %1 preference pack Застосувати набір налаштувань %1 - + Choose a FreeCAD config file to import Виберіть файл конфігурації FreeCAD для імпорту - + File exists Файл вже існує - + A preference pack with that name already exists. Overwrite? Набір налаштувань з таким імʼям вже існує. Перезаписати? diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index aa27d85cb0..26dc5f4e2a 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -117,7 +117,7 @@ Edita - + Import Importa @@ -188,8 +188,8 @@ Posició - + Transform Transforma @@ -421,42 +421,42 @@ EditMode - + Default Per defecte - + The object will be edited using the mode defined internally to be the most appropriate for the object type The object will be edited using the mode defined internally to be the most appropriate for the object type - + Transform Transforma - + The object will have its placement editable with the Std TransformManip command The object will have its placement editable with the Std TransformManip command - + Cutting Tall - + This edit mode is implemented as available but currently does not seem to be used by any object This edit mode is implemented as available but currently does not seem to be used by any object - + Color Color - + The object will have the color of its individual faces editable with the Part FaceColors command The object will have the color of its individual faces editable with the Part FaceColors command @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings Paràmetres de la càmera - + Orientation Orientació - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view Vista actual @@ -2456,72 +2456,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... Reset page '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... Reset group '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... Reset all... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings Esborra els paràmetres d'usuari - + Do you want to clear all your user settings? Voleu esborrar tots els vostres paràmetres d'usuari? - + If you agree all your settings will be cleared. Si hi esteu d'acord, tots els vostres paràmetres s'esborraran. - + Wrong parameter El paràmetre és incorrecte. - + Restart required Restart required - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later @@ -2858,36 +2858,36 @@ in the corner -- in % of height/width of viewport in the corner -- in % of height/width of viewport - + Axis cross will be shown by default at file opening or creation Axis cross will be shown by default at file opening or creation - + Show axis cross by default Show axis cross by default - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files El temps necessari per a l'última operació i la freqüència de marcs resultant es mostrarà en el cantó inferior esquerre dels fitxers oberts - + Show counter of frames per second Mostra el comptador d'imatges per segon - + Rendering Renderització - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2896,22 +2896,22 @@ Changing this option requires a restart of the application. Changing this option requires a restart of the application. - + Use software OpenGL Use software OpenGL - + Use OpenGL VBO (Vertex Buffer Object) Use OpenGL VBO (Objecte de memòria intermèdia de vèrtex) - + Render cache Renderització de la memòria cau - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2934,7 +2934,17 @@ issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2951,92 +2961,92 @@ only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - + Auto Auto - + Distributed Distribuïda - + Centralized Centralitzada - + Anti-Aliasing Antialiàsing - + What kind of multisample anti-aliasing is used What kind of multisample anti-aliasing is used - + None Cap - + Line Smoothing Suavització de línies - + MSAA 2x MSAA 2x - + MSAA 4x MSAA 4x - + MSAA 8x MSAA 8x - + Transparent objects: Objectes transparents: - + Render types of transparent objects Renderitza els tipus d'objectes transparents - + One pass Una passada - + Backface pass Passada per la cara posterior - + Marker size: Mida del marcador: - + Size of vertices in the Sketcher, TechDraw and other workbenches Size of vertices in the Sketcher, TechDraw and other workbenches - + Eye to eye distance for stereo modes Distància entre els ulls per a la visió estereoscòpica - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3045,48 +3055,48 @@ The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. - + Backlight is enabled with the defined color La retroil·luminació s'ha activat amb el color definit - - + + Backlight color Color de la retroil·luminació - + Intensity Intensitat - + Intensity of the backlight Intensitat de la retroil·luminació - + Camera type Tipus de càmera - + Objects will appear in a perspective projection Els objectes apareixeran en una projecció en perspectiva - + Perspective renderin&g &Renderització en perspectiva - + Objects will be projected in orthographic projection Els objectes es projectaran en projecció ortogràfica - + Or&thographic rendering Renderització or&togràfica @@ -3098,57 +3108,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing Antialiàsing - + Open a new viewer or restart %1 to apply anti-aliasing changes. Obriu un visualitzador nou o reinicieu %1 perquè s'apliquen els canvis d'antialiàsing @@ -4036,7 +4046,7 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsNavigation - + Navigation Navegació @@ -4122,68 +4132,78 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color Color - + Base color for all elements Base color for all elements - + Rotation center indicator Rotation center indicator - + Sphere size Sphere size - + Color and transparency Color and transparency - + The size of the rotation center indicator The size of the rotation center indicator - + The color of the rotation center indicator The color of the rotation center indicator - + 3D Navigation Navegació 3D - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. Mostra les configuracions del botó del ratolí per a cada paràmetre de navegació escollit. Seleccioneu un paràmetre i, a continuació, premeu el botó per a veure aquestes configuracions. - + Mouse... Ratolí... - + Navigation settings set Un conjunt de configuracions de navegació - + Orbit style Estil d'òrbita - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4194,193 +4214,193 @@ Turntable: the part will be rotated around the z-axis (with constrained axes). Free Turntable: the part will be rotated around the z-axis. - + Turntable En rotació - + Trackball Ratolí de bola - + Free Turntable Free Turntable - + Rotation mode Rotation mode - + Rotations in 3D will use current cursor position as center for rotation Les rotacions en 3D utilitzaran la posició actual del cursor com a centre de rotació - + Window center Window center - + Drag at cursor Drag at cursor - + Object center Object center - + Default camera orientation Default camera orientation - + Default camera orientation when creating a new document or selecting the home view Default camera orientation when creating a new document or selecting the home view - + Camera zoom Camera zoom - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. Configura el zoom de la càmera per als nous documents. El valor és el diàmetre de l’esfera per a ajustar-se a la pantalla. - + mm mm - + Animations Animations - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration Animation duration - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer Les operacions del zoom es realitzaran en la posició del punter del ratolí - + Zoom at cursor Zoom en el cursor - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - + Direction of zoom operations will be inverted La direcció de les operacions de zoom s’invertirà - + Invert zoom Invertix el zoom - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. Evita la inclinació de la vista quan s'està fent zoom amb els dits. Sols afecta l'estil de Navegació amb gestos. Aquesta opció no desactiva la inclinació del ratolí. - + Disable touchscreen tilt gesture Desactiva el gest d'inclinació de la pantalla tàctil - + Isometric Isomètric - + Dimetric Dimètric - + Trimetric Trimètric - + Top Planta - + Front Alçat - + Left Esquerra - + Right Dreta - + Rear Posterior - + Bottom Inferior - + Custom Personalitzat @@ -5636,7 +5656,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View Visualització de les propietats @@ -6100,15 +6120,15 @@ Do you want to save your changes? Format PDF - + Graphviz format Graphviz format + - Export graph Exporta el gràfic @@ -6688,14 +6708,14 @@ How do you want to proceed? Gui::PropertyView - - + + View Visualitza - - + + Data Dades @@ -7665,22 +7685,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF Exporta a PDF - + PDF file Fitxer PDF - + Opening file failed No s'ha pogut obrir el fitxer. - + Can't open file '%1' for writing. No s'ha pogut obrir el fitxer '%1' per a escriure-hi. @@ -7940,45 +7960,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype El tipus de fitxer és desconegut. - - + + Cannot open unknown filetype: %1 No es pot obrir el tipus de fitxer desconegut: %1 - + Export failed Exportació fallida - + Cannot save to unknown filetype: %1 No es pot guardar el tipus de fitxer desconegut: %1 - + Workbench failure Fallada del banc de treball - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. - + Invalid OpenGL Version Invalid OpenGL Version @@ -8029,8 +8049,8 @@ Do you want to specify another directory? S'està exportant a PDF... - + Unsaved document El document no s'ha guardat. @@ -8595,7 +8615,7 @@ Please open a browser window and type in: http://localhost:%1. No s'ha trobat el fitxer %1 ni en %2 ni en %3 - + Navigation styles Estils de navegació @@ -8896,8 +8916,8 @@ the current copy will be lost. Toggle overlay - + Toggle floating window Toggle floating window @@ -8913,192 +8933,187 @@ the current copy will be lost. Press ESC to hide hint - + UI UI - + Tree view Vista d'arbre - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns Resizable columns - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar Hide scroll bar - + Hide header Hide header - + IconSize IconSize - + FontSize FontSize - + ItemSpacing ItemSpacing - + Overlay Overlay - + Hide tab bar Hide tab bar - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view Auto hide in non 3D view - + Auto mouse pass through Auto mouse pass through - + Auto mouse wheel pass through Auto mouse wheel pass through - + Delay mouse wheel pass through (ms) Delay mouse wheel pass through (ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube Check Navigation Cube - + Hint trigger size Hint trigger size - + Hint width Hint width - + Left panel hint offset Left panel hint offset - + Left panel hint length Left panel hint length - + Right panel hint offset Right panel hint offset - + Right panel hint length Right panel hint length - + Top panel hint offset Top panel hint offset - + Top panel hint length Top panel hint length - + Bottom panel hint offset Bottom panel hint offset - + Bottom panel hint length Bottom panel hint length - + Hint show tab bar Hint show tab bar - + Hint delay (ms) Hint delay (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover Activate on hover - + Layout delay (ms) Layout delay (ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10031,8 +10046,8 @@ the current copy will be lost. Crea un document buit nou - + Unnamed Sense nom @@ -12342,12 +12357,12 @@ després que s'execute FreeCAD NaviCubeDraggableCmd - + Movable navigation cube Movable navigation cube - + Drag and place NaviCube Drag and place NaviCube @@ -12355,32 +12370,32 @@ després que s'execute FreeCAD NaviCubeSettings - + FRONT FRONT - + TOP TOP - + RIGHT RIGHT - + REAR REAR - + BOTTOM BOTTOM - + LEFT LEFT @@ -12866,47 +12881,47 @@ quan FreeCAD s'executa. Si aquesta opció està marcada, FreeCAD en mostrarà un Personalitzat (%1px) - + Combo View Visualització combinada - + TreeView and PropertyView Vista d'arbre i vista de les propietats - + Preference Pack Name Preference Pack Name - + Tags Tags - + Apply Aplica - + Apply the %1 preference pack Apply the %1 preference pack - + Choose a FreeCAD config file to import Choose a FreeCAD config file to import - + File exists File exists - + A preference pack with that name already exists. Overwrite? A preference pack with that name already exists. Overwrite? diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index d59a137f6c..f847a7c70b 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -117,7 +117,7 @@ 编辑 - + Import 导入 @@ -188,8 +188,8 @@ 定位 - + Transform 变换 @@ -421,42 +421,42 @@ EditMode - + Default 默认 - + The object will be edited using the mode defined internally to be the most appropriate for the object type 对象将使用内部定义的模式（以最适合对象的类型）进行编辑 - + Transform 变换 - + The object will have its placement editable with the Std TransformManip command 该对象将可以通过 Std TransformManip 命令进行放置编辑 - + Cutting 锯切 - + This edit mode is implemented as available but currently does not seem to be used by any object 此编辑模式是可用的，但当前似乎没有用于任何对象 - + Color 颜色 - + The object will have the color of its individual faces editable with the Part FaceColors command 该对象的各个面的颜色将使用 FaceColors 命令进行编辑 @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 相机设置 - + Orientation 方向 - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 当前视图 @@ -2457,72 +2457,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... 重置页 %1 - + Resets the user settings for the page '%1' 重置页面 '%1 ' 的用户设置 - + Reset group '%1'... 重置组 '%1'... - + Resets the user settings for the group '%1' 重置群组的%1 的用户设置 - + Reset all... 重置所有... - + Resets the user settings entirely 全部重置用户设置 - + Clear user settings 清除用户设置 - + Do you want to clear all your user settings? 是否要清除所有用户设置？ - + If you agree all your settings will be cleared. 如果您同意，您的设置将被清除。 - + Wrong parameter 参数错误 - + Restart required 需要重启 - + You must restart FreeCAD for changes to take effect. 你需要重启freecad使更改生效 - + Restart now 立即重启 - + Restart later 稍后重启 @@ -2858,34 +2858,34 @@ in the corner -- in % of height/width of viewport 边角中主坐标系统大小——占视图高度/宽度的百分比的 % - + Axis cross will be shown by default at file opening or creation 在文件打开或创建时默认会显示坐标轴 - + Show axis cross by default 默认显示坐标轴 - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files 将在打开的文件中左下角显示最后一次操作所需时间和结束帧速率 - + Show counter of frames per second 显示每秒运行帧数 - + Rendering 正在渲染 - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2894,22 +2894,22 @@ Changing this option requires a restart of the application. 更改此选项需要重启应用程序。 - + Use software OpenGL 使用软件 OpenGL - + Use OpenGL VBO (Vertex Buffer Object) 使用 OpenGL VBO (顶点缓存对象) - + Render cache 渲染缓存 - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2927,7 +2927,17 @@ VBO 提供了显著的性能提升，因为数据位于图形内存而非系统 注意：有时此功能可能会导致一系列不同的问题，从图形异常到 GPU 崩溃。 在 FreeCAD 论坛寻求支持时，请启用此设置。 - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2942,92 +2952,92 @@ but slower response to any scene changes. 3）“集中式”，手动关闭所有视图提供者的所有节点中的缓存，并且仅在场景图根节点处缓存。 这提供了最快地渲染速度，但对场景变化的响应速度较慢。 - + Auto 自动 - + Distributed 分布 - + Centralized 居中 - + Anti-Aliasing 抗锯齿 - + What kind of multisample anti-aliasing is used 使用什么多重采样抗锯齿模式 - + None 无 - + Line Smoothing 线条平滑化 - + MSAA 2x 反锯齿 2x - + MSAA 4x 反锯齿 4x - + MSAA 8x 反锯齿 8x - + Transparent objects: 透明对象： - + Render types of transparent objects 透明对象的渲染类型 - + One pass 單次通過 - + Backface pass 背面通过 - + Marker size: 标记大小： - + Size of vertices in the Sketcher, TechDraw and other workbenches 草图、 技术绘图和其他工作台顶点大小 - + Eye to eye distance for stereo modes 立体模式的双眼距离 - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3036,48 +3046,48 @@ bounding box size of the 3D object that is currently displayed. 边界框大小乘以的因素。 - + Backlight is enabled with the defined color 已启用带有定义颜色的背光 - - + + Backlight color 背光颜色 - + Intensity 强度 - + Intensity of the backlight 背光强度 - + Camera type 相机类型 - + Objects will appear in a perspective projection 对象将以透视投影法显示 - + Perspective renderin&g 以透视渲染(&g) - + Objects will be projected in orthographic projection 对象将以正交投影方式投影 - + Or&thographic rendering 正视投影渲染(&t) @@ -3089,57 +3099,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20px - + 25px 25px - + 30px 30px - + Anti-aliasing 抗锯齿 - + Open a new viewer or restart %1 to apply anti-aliasing changes. 打开一个新的查看器或重新启动 %1 以应用消除锯齿的更改。 @@ -4025,7 +4035,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation 导航栏 @@ -4111,68 +4121,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color 颜色 - + Base color for all elements 所有元素的基本颜色 - + Rotation center indicator 旋转中心指示器 - + Sphere size 球体大小 - + Color and transparency 颜色和透明度 - + The size of the rotation center indicator 旋转中心指示器大小 - + The color of the rotation center indicator 旋转中心指示器的颜色 - + 3D Navigation 三维导航 - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. 列出每个所选导航设置的鼠标按钮配置。 选择一组然后按下按钮查看所述配置。 - + Mouse... 鼠标... - + Navigation settings set 导航栏设置 - + Orbit style 环绕模式 - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4183,135 +4203,135 @@ Free Turntable: the part will be rotated around the z-axis. 自由转盘：部件将绕z轴旋转。 - + Turntable 转盘 - + Trackball 轨迹球 - + Free Turntable 自由转盘 - + Rotation mode 旋转模式 - + Rotations in 3D will use current cursor position as center for rotation 以当前光标位置为3D旋转中心 - + Window center 窗口中心 - + Drag at cursor 在光标处拖动 - + Object center 对象中心 - + Default camera orientation 默认相机方向 - + Default camera orientation when creating a new document or selecting the home view 创建新文档或选择主视图时的默认相机方向 - + Camera zoom 镜头缩放 - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. 设置新文档相机缩放。 该值是要适合屏幕的球体的直径。 - + mm mm - + Animations 动画 - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration 具有固定持续时间的导航动画持续时间 - + Animation duration 动画时长 - + The duration of navigation animations in milliseconds 以毫秒为单位的导航动画持续时间 - + Zoom step 缩放步骤 - + Zoom operations will be performed at position of mouse pointer 缩放操作将在鼠标指针位置进行 - + Zoom at cursor 以光标为中心缩放 - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. 将缩放多少。缩放步长为“1”意味着每个缩放步长为 7.5 倍。 - + Direction of zoom operations will be inverted 缩放操作的方向将反转 - + Invert zoom 反向缩放 - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4320,57 +4340,57 @@ Mouse tilting is not disabled by this setting. 此设置不会禁用鼠标倾斜。 - + Disable touchscreen tilt gesture 禁用触摸屏倾斜手势 - + Isometric 等轴测 - + Dimetric 二轴测 - + Trimetric 三轴测 - + Top 俯视 - + Front 前视 - + Left 左视 - + Right 右视 - + Rear 后视 - + Bottom 底视 - + Custom 自定义 @@ -5625,7 +5645,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View 属性浏览器 @@ -6089,15 +6109,15 @@ Do you want to save your changes? PDF 格式 - + Graphviz format Graphviz 格式 + - Export graph 导出图形 @@ -6677,14 +6697,14 @@ How do you want to proceed? Gui::PropertyView - - + + View 视图 - - + + Data 数据 @@ -7657,22 +7677,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF 导出PDF - + PDF file PDF 文件 - + Opening file failed 打开文件失败 - + Can't open file '%1' for writing. 无法打开文件“%1”进行写入。 @@ -7932,45 +7952,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype 未知文件类型 - - + + Cannot open unknown filetype: %1 无法打开未知文件类型: %1 - + Export failed 导出失败 - + Cannot save to unknown filetype: %1 无法保存为未知的文件类型: %1 - + Workbench failure 工作台故障 - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. 此系统正在运行 OpenGL %1。%2。FreeCAD 需要 OpenGL 2.0 或以上。请根据需要升级您的图形驱动程序和/或卡。 - + Invalid OpenGL Version 无效的 OpenGL 版本 @@ -8021,8 +8041,8 @@ Do you want to specify another directory? 导出 PDF... - + Unsaved document 未保存的文件 @@ -8589,7 +8609,7 @@ Please open a browser window and type in: http://localhost:%1. 在 %2 或 %3 中找不到文件 %1 - + Navigation styles 导航模式 @@ -8886,8 +8906,8 @@ the current copy will be lost. 显示/隐藏悬浮窗 - + Toggle floating window 切换浮动窗口 @@ -8903,192 +8923,187 @@ the current copy will be lost. 按 ESC 可隐藏提示 - + UI 界面 - + Tree view 结构树浏览器 - + Item background color 项目背景颜色 - + Item background padding 项目背景填充 - + Resizable columns 可调整大小的列 - - Show item checkbox - 显示项目复选框 - - - + Hide extra column 隐藏额外列 - + Hide scroll bar 隐藏滚动条 - + Hide header 隐藏标题 - + IconSize 图标大小 - + FontSize 字号 - + ItemSpacing 物品间距 - + Overlay 叠加层 - + Hide tab bar 隐藏标签栏 - + Hide property view scroll bar 隐藏属性视图滚动条 - + Auto hide in non 3D view 在非3D视图中自动隐藏 - + Auto mouse pass through 鼠标自动通过 - + Auto mouse wheel pass through 自动鼠标滚轮通过 - + Delay mouse wheel pass through (ms) 延迟鼠标滚轮通过(ms) - + Alpha test radius Alpha 测试半径 - + Check Navigation Cube 检查导航立方体 - + Hint trigger size 提示触发大小 - + Hint width 提示宽度 - + Left panel hint offset 左侧面板提示偏移 - + Left panel hint length 左侧面板提示长度 - + Right panel hint offset 右侧面板提示偏移 - + Right panel hint length 右侧面板提示长度 - + Top panel hint offset 顶部面板提示偏移 - + Top panel hint length 顶部面板提示长度 - + Bottom panel hint offset 底部面板提示偏移 - + Bottom panel hint length 底部面板提示长度 - + Hint show tab bar 提示显示标签栏 - + Hint delay (ms) 提示延迟 (ms) - + Splitter auto hide delay (ms) 分离器自动隐藏延迟 (ms) - + Activate on hover 悬停时激活 - + Layout delay (ms) 布局延迟 (ms) - + Animation duration (ms) 动画持续时间，单位 ms - + Animation curve type 动画曲线类型 @@ -10021,8 +10036,8 @@ the current copy will be lost. 创建一个新空白文档 - + Unnamed 未命名 @@ -12331,12 +12346,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube 可移动导航立方体 - + Drag and place NaviCube 拖动并放置导航立方体 @@ -12344,32 +12359,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT 前視圖 - + TOP 上視圖 - + RIGHT 右視圖 - + REAR 後視圖 - + BOTTOM 底視圖 - + LEFT 左視圖 @@ -12851,47 +12866,47 @@ display the splash screen 自定义 (%1px) - + Combo View 组合浏览器 - + TreeView and PropertyView 树状视图和属性视图 - + Preference Pack Name 首选项配置包名称 - + Tags 标签 - + Apply 应用 - + Apply the %1 preference pack 应用 %1 首选项配置包 - + Choose a FreeCAD config file to import 选择要导入的 FreeCAD 配置文件 - + File exists 文件已存在 - + A preference pack with that name already exists. Overwrite? 已存在该名称的首选项配置包。是否覆盖？ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index ba9516774a..c90ea0770f 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -117,7 +117,7 @@ 編輯 - + Import 匯入 @@ -188,8 +188,8 @@ 佈置 - + Transform 轉換 @@ -421,42 +421,42 @@ EditMode - + Default 預設 - + The object will be edited using the mode defined internally to be the most appropriate for the object type 此物件將被使用內部定義模式來編輯，這會是最適合的物件類型。 - + Transform 轉換 - + The object will have its placement editable with the Std TransformManip command 此物件的位置將可透過 Std TransformManip 指令進行編輯 - + Cutting 切割 - + This edit mode is implemented as available but currently does not seem to be used by any object 此編輯模式已實作為可用，但目前似乎沒有被任何物件使用 - + Color 色彩 - + The object will have the color of its individual faces editable with the Part FaceColors command 該物件的個別面的顏色將可透過 Part FaceColors 指令進行編輯 @@ -787,37 +787,37 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::CameraDialog - + Camera settings 相機視角設定 - + Orientation 定位 - + Q0 Q0 - + Q1 Q1 - + Q2 Q2 - + Q3 Q3 - + Current view 目前視角 @@ -2454,72 +2454,72 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - + Reset page '%1'... 重設頁面 '%1'... - + Resets the user settings for the page '%1' Resets the user settings for the page '%1' - + Reset group '%1'... 重設群組 '%1'... - + Resets the user settings for the group '%1' Resets the user settings for the group '%1' - + Reset all... 全部重置... - + Resets the user settings entirely Resets the user settings entirely - + Clear user settings 清除使用者設定 - + Do you want to clear all your user settings? 您確定要清除所有的設定嗎？ - + If you agree all your settings will be cleared. 當您同意後，所有的設定將會被清除 - + Wrong parameter 錯誤的參數 - + Restart required 需要重新啟動 - + You must restart FreeCAD for changes to take effect. 您必須重新啟動 FreeCAD 以使更改生效。 - + Restart now 現在重新啟動 - + Restart later 稍後重新啟動 @@ -2854,35 +2854,35 @@ in the corner -- in % of height/width of viewport 在角落顯示的主座標系統大小 -- 以可視區域高度/寬度的百分比 % 表示 - + Axis cross will be shown by default at file opening or creation 軸的十字將預設顯示在一個檔案開啟或建立時 opening or creation - + Show axis cross by default 預設顯示軸的十字 - + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files 在打開文件的左下角會顯示上次操作所需的時間和結果畫面更新率 - + Show counter of frames per second 顯示每秒影格計數器 - + Rendering 算繪 - + This option is useful for troubleshooting graphics card and driver problems. Changing this option requires a restart of the application. @@ -2891,22 +2891,22 @@ Changing this option requires a restart of the application. 更改此選項需要重新啟動應用程式. - + Use software OpenGL 使用軟體OpenGL - + Use OpenGL VBO (Vertex Buffer Object) 使用 OpenGL VBO (Vertex Buffer Object 頂點緩衝物件) - + Render cache 算繪快取 - + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading vertex data (position, normal vector, color, etc.) to the graphics card. @@ -2924,7 +2924,17 @@ VBO 能夠提供顯著的性能提升，因為數據存儲在顯示卡記憶體 注意：有時，此功能可能會導致各種不同的問題，從圖形異常到GPU崩潰錯誤。在FreeCAD論壇尋求支援時，請記住報告此設置已啟用。 - + + Letter color: + Letter color: + + + + Axis letter color + Axis letter color + + + 'Render Caching' is another way to say 'Rendering Acceleration'. There are 3 options available to achieve this: 1) 'Auto' (default), let Coin3D decide where to cache. @@ -2941,92 +2951,92 @@ but slower response to any scene changes. 3) '集中式'，手動在所有視圖提供者的所有節點中關閉快取，並且僅在場景圖的根節點進行快取。這提供了最快的算繪速度，但對場景的任何更改反應較慢。 - + Auto 自動 - + Distributed 分散式 - + Centralized 中心化 - + Anti-Aliasing 反鋸齒 - + What kind of multisample anti-aliasing is used 使用了哪種多重採樣反鋸齒技術 - + None 無 - + Line Smoothing 線條平滑化 - + MSAA 2x 反鋸齒 2x - + MSAA 4x 反鋸齒 4x - + MSAA 8x 反鋸齒 8x - + Transparent objects: 透明物件： - + Render types of transparent objects 透明物件的算繪類型 - + One pass 單次通過 - + Backface pass 背面通道 - + Marker size: 標記大小 - + Size of vertices in the Sketcher, TechDraw and other workbenches 草圖工作台、工程製圖工作台和其他工作台中的頂點大小 - + Eye to eye distance for stereo modes 立體模式左右兩眼間的距離 - + Eye-to-eye distance used for stereo projections. The specified value is a factor that will be multiplied with the bounding box size of the 3D object that is currently displayed. @@ -3035,48 +3045,48 @@ bounding box size of the 3D object that is currently displayed. 指定的值是一個因數，將與當前顯示的3D物件的邊界框大小相乘。這個因數用於計算立體投影中的視線間距。 - + Backlight is enabled with the defined color 以定義顏色來啟動背光 - - + + Backlight color 背光顏色 - + Intensity 強度 - + Intensity of the backlight 背光源的強度 - + Camera type 相機視角 - + Objects will appear in a perspective projection 物件將以透視投影法顯示 - + Perspective renderin&g 透視圖(&g) - + Objects will be projected in orthographic projection 物件將以正投影法顯示 - + Or&thographic rendering 以正視算繪(&t) @@ -3088,57 +3098,57 @@ bounding box size of the 3D object that is currently displayed. Gui::Dialog::DlgSettings3DViewImp - + 5px 5px - + 7px 7px - + 9px 9px - + 11px 11px - + 13px 13px - + 15px 15px - + 20px 20像素 - + 25px 25像素 - + 30px 30像素 - + Anti-aliasing 反鋸齒 - + Open a new viewer or restart %1 to apply anti-aliasing changes. 開啟新視窗或重新啟動 %1 來套用反鋸齒效果 @@ -4023,7 +4033,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsNavigation - + Navigation 導覽 @@ -4109,68 +4119,78 @@ You can also use the form: John Doe <john@doe.com> + Opacity when inactive + Opacity when inactive + + + + Opacity of the navigation cube when not focused + Opacity of the navigation cube when not focused + + + Color 色彩 - + Base color for all elements 所有元件之基底顏色 - + Rotation center indicator 旋轉中心指示器 - + Sphere size 球體大小 - + Color and transparency 顏色與透明度 - + The size of the rotation center indicator 旋轉中心指示器的大小 - + The color of the rotation center indicator 旋轉中心指示器的顏色 - + 3D Navigation 3D 導航 - + List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. 列出每個選定導覽設定的滑鼠按鈕配置。 選擇一個設定，然後按按鈕查看相應的配置。 - + Mouse... 滑鼠... - + Navigation settings set 已設置之導覽設定 - + Orbit style 環繞模式 - + Rotation orbit style. Trackball: moving the mouse horizontally will rotate the part around the y-axis Turntable: the part will be rotated around the z-axis (with constrained axes). @@ -4181,136 +4201,136 @@ Free Turntable: the part will be rotated around the z-axis. 自由旋轉台：零件將被繞z軸旋轉。 - + Turntable 旋轉台 - + Trackball 軌跡球 - + Free Turntable 自由旋轉台 - + Rotation mode 旋轉模式 - + Rotations in 3D will use current cursor position as center for rotation 3D中的旋轉將以目前遊標位置作為旋轉的中心點 - + Window center 視窗中心 - + Drag at cursor 在遊標位置拖曳 - + Object center 物件中心 - + Default camera orientation 預設相機方向 - + Default camera orientation when creating a new document or selecting the home view 在創建新文件或選擇主頁視圖時的預設相機方向 - + Camera zoom 相機縮放 - + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. 設定相機對新文件的縮放。 其值是適合放在螢幕上球的直徑 - + mm mm - + Animations 動畫 - + Enable spinning animations that are used in some navigation styles after dragging Enable spinning animations that are used in some navigation styles after dragging - + Enable spinning animations Enable spinning animations - + Duration of navigation animations that have a fixed duration Duration of navigation animations that have a fixed duration - + Animation duration 動畫長度 - + The duration of navigation animations in milliseconds The duration of navigation animations in milliseconds - + Zoom step Zoom step - + Zoom operations will be performed at position of mouse pointer 縮放操作將在滑鼠滑標位置執行 - + Zoom at cursor 遊標處放大 - + How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. 將縮放多少。 縮放步驟 '1' 表示每個縮放步驟的因數為7.5。 - + Direction of zoom operations will be inverted 縮放操作的方向將被反轉 - + Invert zoom 反相縮放 - + Prevents view tilting when pinch-zooming. Affects only gesture navigation style. Mouse tilting is not disabled by this setting. @@ -4319,57 +4339,57 @@ Mouse tilting is not disabled by this setting. 此設置不會停用滑鼠傾斜。 - + Disable touchscreen tilt gesture 停用觸控屏傾斜手勢 - + Isometric 等角立體 - + Dimetric 二等角立體 - + Trimetric 不等角立體 - + Top 上視圖 - + Front 前視圖 - + Left 左視圖 - + Right 右視圖 - + Rear 後視圖 - + Bottom 底視圖 - + Custom 自訂 @@ -5623,7 +5643,7 @@ originally selected prior to opening this dialog Gui::DockWnd::PropertyDockView - + Property View 屬性檢視 @@ -6087,15 +6107,15 @@ Do you want to save your changes? PDF 格式 - + Graphviz format Graphviz 格式 + - Export graph 匯出圖形 @@ -6675,14 +6695,14 @@ How do you want to proceed? Gui::PropertyView - - + + View 檢視 - - + + Data 資料 @@ -7653,22 +7673,22 @@ Do you want to specify another directory? Gui::View3DInventor - + Export PDF 匯出 PDF - + PDF file PDF 檔 - + Opening file failed 開啟檔案失敗 - + Can't open file '%1' for writing. 無法開啟並寫入檔案 '%1' @@ -7928,45 +7948,45 @@ Do you want to specify another directory? Python - - - + + + Unknown filetype 未知檔案類型 - - + + Cannot open unknown filetype: %1 無法開啟未知文件類型：%1 - + Export failed 匯出失敗 - + Cannot save to unknown filetype: %1 無法儲存為未知的檔案類型：%1 - + Workbench failure 工作台故障 - + %1 %1 - + This system is running OpenGL %1.%2. FreeCAD requires OpenGL 2.0 or above. Please upgrade your graphics driver and/or card as required. 此系統正在運行 OpenGL %1.%2。FreeCAD 需要 OpenGL 2.0 或更高的版本。請依要求升級您的繪圖驅動程式與/或繪圖卡。 - + Invalid OpenGL Version 無效的 OpenGL 版本 @@ -8017,8 +8037,8 @@ Do you want to specify another directory? 匯出 PDF... - + Unsaved document 未儲存文件 @@ -8579,7 +8599,7 @@ Please open a browser window and type in: http://localhost:%1. 在%2與%3中找不到檔案 %1 - + Navigation styles 導航模式 @@ -8876,8 +8896,8 @@ the current copy will be lost. 切換重疊視圖 - + Toggle floating window Toggle floating window @@ -8893,192 +8913,187 @@ the current copy will be lost. 請按 ESC 鍵來隱藏提示 - + UI 使用者介面 - + Tree view 樹狀檢視 - + Item background color Item background color - + Item background padding Item background padding - + Resizable columns 可調整大小的列 - - Show item checkbox - Show item checkbox - - - + Hide extra column Hide extra column - + Hide scroll bar 隱藏捲動軸 - + Hide header 隱藏標頭 - + IconSize 圖示大小 - + FontSize 字體大小 - + ItemSpacing ItemSpacing - + Overlay 重疊 - + Hide tab bar 隱藏分頁列 - + Hide property view scroll bar Hide property view scroll bar - + Auto hide in non 3D view 在非 3D 視圖中自動隱藏 - + Auto mouse pass through 自動滑鼠通過 - + Auto mouse wheel pass through 自動滑鼠滾輪通過 - + Delay mouse wheel pass through (ms) 延遲滑鼠滾輪通過(ms) - + Alpha test radius Alpha test radius - + Check Navigation Cube 檢查導覽立方體 - + Hint trigger size 提示觸發區域大小 - + Hint width 提示寬度 - + Left panel hint offset 左側面板提示偏移量 - + Left panel hint length 左側面板提示長度 - + Right panel hint offset 右側面板提示偏移量 - + Right panel hint length 右側面板提示長度 - + Top panel hint offset 上方面板提示偏移量 - + Top panel hint length 上方面板提示長度 - + Bottom panel hint offset 底部面板提示偏移量 - + Bottom panel hint length 底部面板提示長度 - + Hint show tab bar 提示顯示分頁列 - + Hint delay (ms) 提示延遲 (ms) - + Splitter auto hide delay (ms) Splitter auto hide delay (ms) - + Activate on hover 當遊標懸停在上方時觸發激活 - + Layout delay (ms) 佈局延遲(ms) - + Animation duration (ms) Animation duration (ms) - + Animation curve type Animation curve type @@ -10011,8 +10026,8 @@ the current copy will be lost. 建立一個新的空白檔案 - + Unnamed 未命名 @@ -12321,12 +12336,12 @@ after FreeCAD launches NaviCubeDraggableCmd - + Movable navigation cube 可移動的導覽立方體 - + Drag and place NaviCube 拖放導航方塊 @@ -12334,32 +12349,32 @@ after FreeCAD launches NaviCubeSettings - + FRONT 前視圖 - + TOP 上視圖 - + RIGHT 右視圖 - + REAR 後視圖 - + BOTTOM 底視圖 - + LEFT 左視圖 @@ -12840,47 +12855,47 @@ display the splash screen 自訂 (%1px) - + Combo View 複合檢視 - + TreeView and PropertyView 樹狀圖檢視及屬性檢視 - + Preference Pack Name 偏好設定包名稱 - + Tags 標籤 - + Apply 應用 - + Apply the %1 preference pack 套用 %1 之偏好設定包 - + Choose a FreeCAD config file to import 還擇一個 FreeCAD 設定檔以匯入 - + File exists 檔案已存在 - + A preference pack with that name already exists. Overwrite? 有此名稱之偏好設定包已存在。是否覆寫？ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index fc9bb753e7..ae5026964d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -22,31 +22,31 @@ CompactView - + Icon - + <b>Package Name</b> - + Version - + Description - + Update Available @@ -256,61 +256,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager - - - Downloading info... - - - - - Stop the cache update - - - - - Refresh local cache - - - - - Download and apply all available updates - - - - - Update all Addons - - - - - Check for updates - - - - - View and update Python package dependencies - - - - - Python dependencies... - - - - - Developer tools... - - - - - Close the Addon Manager - - - - - Close - - Edit Tags @@ -595,76 +540,91 @@ installed addons will be checked for available updates - Hide Addons marked Python 2 Only + Hide Addons without a license - Hide Addons marked Obsolete + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-OSI-approved license + + + + + Hide Addons marked Python 2 Only + + + + + Hide Addons marked Obsolete + + + + Hide Addons that require a newer version of FreeCAD - + Custom repositories - + Proxy - + No proxy - + User system proxy - + User-defined proxy: - + Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. - + Advanced Options - + Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode @@ -1137,17 +1097,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... - + Loading addon information - + Worker process {} is taking a long time to stop... @@ -1164,83 +1124,114 @@ installed addons will be checked for available updates - + Addon manager - + You must restart FreeCAD for changes to take effect. - + Restart now - + Restart later - - + + Refresh local cache - + Updating cache... - + Could not find addon '{}' to select - - + + Checking for updates... - - Apply {} update(s) + + + Close - + + Update all addons + + + + + Check for updates + + + + + Python dependencies... + + + + + Developer tools... + + + + No updates available - - - + + Apply 1 available update + + + + + Apply {} available updates + + + + + + Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. - - + + Maintainer - - + + Author @@ -1261,7 +1252,7 @@ installed addons will be checked for available updates - + Update @@ -1276,27 +1267,27 @@ installed addons will be checked for available updates - + Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server - + Error with encrypted connection @@ -1337,162 +1328,157 @@ installed addons will be checked for available updates - + Version {version} installed on {date} - + Version {version} installed - + Installed on {date} - - - - + + + + Installed - + Currently on branch {}, name changed to {} - - On branch {}, update available to version - - - - - Update available to version - - - - - An update is available - - - - + Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - - - - - Updated, please restart FreeCAD to use - - - - + Update check in progress - - Automatic update checks disabled - - - - + Installation location - + + Changed to branch '{}' -- please restart to use Addon. + + + + + This Addon has been updated. Restart FreeCAD to see changes. + + + + + Disabled + + + + + Currently on branch {}, update available to version {} + + + + + Update available to version {} + + + + + This is the latest version available + + + + WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. - + Success - + Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - - - - + Install - + Uninstall - - Check for Update - - - - - Run Macro - - - - - Change Branch - - - - + Enable - + Disable - + + Check for update + + + + + Run + + + + + Change branch... + + + + Return to package list @@ -1569,9 +1555,9 @@ installed addons will be checked for available updates + - {} is not a subdirectory of {} @@ -1587,6 +1573,7 @@ installed addons will be checked for available updates + Workbench @@ -1771,19 +1758,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1892,140 +1879,138 @@ installed addons will be checked for available updates - + Filter is valid - + Filter regular expression is invalid - + + Search... + + + + Click for details about package {} - + Click for details about workbench {} - + Click for details about macro {} - + Maintainers: - + Tags - + updated - - + + Up-to-date - - - + + + + + Update available + - Pending restart - - + + DISABLED - + Installed version - + Unknown version - + Installed on - + Available version - - Show Addons containing: + + Filter by... - - All + + Addon Type - - Workbenches - - - - - Macros - - - - - Preference Packs - - - - - Status: - - - - + + Any - + + Macro + + + + + Preference Pack + + + + + Installation Status + + + + Not installed - + Filter - - - OK - - DANGER: Developer feature @@ -2085,83 +2070,83 @@ installed addons will be checked for available updates - + Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} - + Downloaded icon for {} - + Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} @@ -2303,17 +2288,17 @@ installed addons will be checked for available updates - + Retrieving macro description... - + Retrieving info from git - + Retrieving info from wiki @@ -2375,25 +2360,40 @@ installed addons will be checked for available updates - - Loading README data... + + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. + + + Composite view + + + + + Expanded view + + + + + Compact view + + Std_AddonMgr - + &Addon manager - + Manage external workbenches, macros, and preference packs @@ -2430,7 +2430,7 @@ installed addons will be checked for available updates QObject - + Addon Manager diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm index d85cc2ecf7..21d2f2c819 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_be.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts index 08ff6374f1..c9ce2764ed 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_be.ts @@ -22,31 +22,31 @@ CompactView - + Icon Гузік - + <b>Package Name</b> <b>Назва пакета</b> - + Version Версія - + Description Апісанне - + Update Available Абнаўленне даступнае @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Кіраванне дадаткамі - - - Downloading info... - Спампаваць інфармацыю... - - - - Stop the cache update - Спыніць абнаўленне кэшу - - - - Refresh local cache - Абнавіць лакальны кэш - - - - Download and apply all available updates - Спампаваць і прымяніць усе даступныя абнаўленні - - - - Update all Addons - Абнавіць усе дадаткі - - - - Check for updates - Праверыць наяўнасць абнаўленняў - - - - View and update Python package dependencies - Паглядзець і абнавіць залежнасці пакета Python - - - - Python dependencies... - Залежнасці Python... - - - - Developer tools... - Інструмент распрацоўкі... - - - - Close the Addon Manager - Зачыніць Кіраванне дадаткамі - - - - Close - Зачыніць - Edit Tags @@ -599,77 +544,92 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Схаваць дадаткі, адзначаныя як толькі для Python 2 - + Hide Addons marked Obsolete Схаваць дадаткі, адзначаныя як састарэлыя - + Hide Addons that require a newer version of FreeCAD Схаваць дадаткі, якія патрабуюць больш новую версію FreeCAD - + Custom repositories Карыстальніцкія сховішча - + Proxy Проксі - + No proxy Без проксі - + User system proxy Сістэмны проксі карыстальніка - + User-defined proxy: Карыстальніцкі проксі: - + Path to git executable (optional): Шлях да двайковага файла git (неабавязкова): - + The path to the git executable. Autodetected if needed and not specified. Шлях да двайковага файла git. Аўтаматычна вызначаецца, калі гэта неабходна і не пазначана. - + Advanced Options Дадатковыя налады - + Show option to change branches (requires git) Паказаць наладу змены галіны (патрабуецца git) - + Disable git (fall back to ZIP downloads only) Адключыць git (вярнуцца да спампоўкі толькі ZIP) - + Activate Addon Manager options intended for developers of new Addons. Задзейнічаць налады Кіравання дадаткамі, якія прызначаныя для распрацоўкі новых дадаткаў. - + Addon developer mode Рэжым распрацоўкі дадаткаў @@ -959,7 +919,7 @@ installed addons will be checked for available updates Change to branch: - Change to branch: + Змяніць на галіну: @@ -1143,17 +1103,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Запуск... - + Loading addon information Загрузка звестак аб дадатку - + Worker process {} is taking a long time to stop... Працоўнаму працэсу {} патрабуецца шмат часу, каб спыніцца... @@ -1172,84 +1132,115 @@ installed addons will be checked for available updates - + Addon manager Кіраванне дадаткамі - + You must restart FreeCAD for changes to take effect. Вы павінны перазапусціць FreeCAD, каб змены былі ўжытыя. - + Restart now Перазапусціць зараз - + Restart later Перазапусціць пазней - - + + Refresh local cache Абнавіць лакальны кэш - + Updating cache... Абнаўленне кэшу... - + Could not find addon '{}' to select Не атрымалася знайсці дадатак '{}' для выбару - - + + Checking for updates... Праверыць наяўнасць абнаўленняў... - - Apply {} update(s) - Прымяніць {} абнаўленне(і) + + + Close + Зачыніць - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Даступныя абнаўленні адсутнічаюць - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Не атрымалася запусціць новы ўстаноўшчык, каб скончыць працу папярэдняга. - + Execution of macro failed. See console for failure details. Не атрымалася выканаць макрас. Падрабязныя звесткі аб збоі глядзіце ў кансолі. - - + + Maintainer Суправаджальнік - - + + Author Аўтар @@ -1270,7 +1261,7 @@ installed addons will be checked for available updates - + Update Абнавіць @@ -1285,27 +1276,27 @@ installed addons will be checked for available updates Не атрымалася імпартаваць QtNetwork - падобна на тое, што ён не ўсталяваны ў вашай сістэме. Ваш пастаўшчык можа мець пакет для гэтай залежнасці (часта названы як "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Не атрымалася пераўтварыць паказаны порт проксі '{}' у нумар порта - + Parameter error: mutually exclusive proxy options set. Resetting to default. Памылка налады: усталяваны ўзаемавыключальныя налады проксі. Скінуць да першапачатковага значэння. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Памылка налады: паказаны карыстальніцкі проксі, але проксі не прадстаўлены. Скінуць да першапачатковага значэння. - + Addon Manager: Unexpected {} response from server Кіраванне дадаткамі: Нечаканы адказ {} ад сервера - + Error with encrypted connection Памылка з зашыфраваным злучэннем @@ -1346,162 +1337,157 @@ installed addons will be checked for available updates Не атрымалася выдаліць - + Version {version} installed on {date} Версія {version} усталяваная {date} - + Version {version} installed Версія {version} усталяваная - + Installed on {date} Дата ўсталявання {date} - - - - + + + + Installed Усталявана - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + У бягучы час знаходзіцца ў галіне {}, назва змененая на {} - - On branch {}, update available to version - У галіне {}, даступна абнаўленне да версіі - - - - Update available to version - Абнаўленне даступна да версіі - - - - An update is available - Даступна абнаўленне - - - + Git tag '{}' checked out, no updates possible Метка Git'{}' праверана, абнаўленняў няма - - This is the latest version available for branch {} - Гэта апошняя даступная версія для галіны {} - - - - Updated, please restart FreeCAD to use - Абноўлена, калі ласка перазапусціце FreeCAD, каб ужыць - - - + Update check in progress Выконваецца праверка абнаўленняў - - Automatic update checks disabled - Аўтаматычная праверка абнаўленняў адключана - - - + Installation location Месцазнаходжанне ўстаноўкі - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Адключана + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete УВАГА: Гэты дадатак састарэлы - - WARNING: This addon is Python 2 Only - УВАГА: Гэты дадатак толькі для Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - УВАГА: Гэты дадатак патрабуе FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. УВАГА: Гэты дадатак у бягучы час усталяваны, але адключаны. Націснуць кнопку 'Уключыць', каб зноў уключыць яго. - + This Addon will be enabled next time you restart FreeCAD. Гэты Дадатак будзе ўключаны пры наступным перазапуску FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Гэты Дадатак будзе адключаны пры наступным перазапуску FreeCAD. - + Success Паспяхова завершана - + Branch change succeeded, please restart to use the new version. Змена галіны прайшло паспяхова, калі ласка, перазапусціце, каб ужыць новую версію. - - Changed to git ref '{}' -- please restart to use Addon. - Зменены на git ref '{}' -- калі ласка, перазапусціце, каб ужыць Дадатак. - - - + Install Усталяваць - + Uninstall Выдаліць - - Check for Update - Праверыць наяўнасць абнаўлення - - - - Run Macro - Выканаць макрас - - - - Change Branch - Змяніць галіну - - - + Enable Уключыць - + Disable Адключыць - + + Check for update + Check for update + + + + Run + Праца + + + + Change branch... + Change branch... + + + Return to package list Вярнуцца да спісу пакетаў @@ -1561,7 +1547,7 @@ installed addons will be checked for available updates Failed to create installation manifest file: - Failed to create installation manifest file: + Не атрымалася стварыць файл маніфесту ўстаноўкі: @@ -1580,9 +1566,9 @@ installed addons will be checked for available updates Абраць файл гузіку для гэтага элемента зместу + - {} is not a subdirectory of {} {} не з'яўляецца ўкладзеным каталогам {} @@ -1598,6 +1584,7 @@ installed addons will be checked for available updates + Workbench Варштат @@ -1784,19 +1771,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Макрасы, які ўсталяваныя з дапамогай Кіравання дадаткамі FreeCAD - + Run Indicates a macro that can be 'run' Выканаць - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Немагчыма прачытаць дадзеныя з GitHub: праверце сваё інтэрнэт-злучэнне і налады проксі, і паўтарыце спробу. @@ -1905,140 +1892,138 @@ installed addons will be checked for available updates Абраць файл гузіку для гэтага пакету - + Filter is valid Фільтр дапушчальны - + Filter regular expression is invalid Хібны рэгулярны выраз фільтра - + + Search... + Пошук... + + + Click for details about package {} Націсніце, каб атрымаць падрабязную інфармацыю аб пакеце {} - + Click for details about workbench {} Націсніце, каб атрымаць падрабязную інфармацыю аб варштаце {} - + Click for details about macro {} Націсніце, каб атрымаць падрабязную інфармацыю аб макрасе {} - + Maintainers: Суправаджальнікі: - + Tags Меткі - + updated абноўлена - - + + Up-to-date Актуальная - - - + + + + + Update available Даступна абнаўленне + - Pending restart У чаканні перазапуску - - + + DISABLED ВЫКЛЮЧАНЫ - + Installed version Усталяваная версія - + Unknown version Невядомая версія - + Installed on Усталяваны на - + Available version Даступная версія - - Show Addons containing: - Паказаць дадаткі, якія змяшчаюць: + + Filter by... + Filter by... - - All - Усе + + Addon Type + Addon Type - - Workbenches - Варштаты - - - - Macros - Макрас - - - - Preference Packs - Пакеты перавагі - - - - Status: - Стан: - - - + + Any Любы - + + Macro + Макрас + + + + Preference Pack + Пакет перавагі + + + + Installation Status + Installation Status + + + Not installed Не ўсталяваны - + Filter Фільтр - - - OK - OK - DANGER: Developer feature @@ -2063,19 +2048,19 @@ installed addons will be checked for available updates Local Table header for local git ref name - Local + Лакальны Remote tracking Table header for git remote tracking branch name - Remote tracking + Падаленае адсочванне Last Updated Table header for git update date - Last Updated + Апошняе абнаўленне @@ -2098,83 +2083,83 @@ installed addons will be checked for available updates Не атрымалася ўсталяваць дадатак {} - + Downloaded package.xml for {} Спампаваць package.xml для {} - + Failed to decode {} file for Addon '{}' Не атрымалася дэкадаваць файл {} для дадатку '{}' - + Any dependency information in this file will be ignored Любая інфармацыя пра залежнасці ў файле будзе прапушчаная - + Downloaded metadata.txt for {} Спампаваць metadata.txt для {} - + Downloaded requirements.txt for {} Спампаваць requirements.txt для {} - + Downloaded icon for {} Спампаваць гузік для {} - + Unable to open macro wiki page at {} Немагчыма адчыніць вікі-старонку макрасу ў {} - + Unable to fetch the code of this macro. Немагчыма выняць код макраса. - + Unable to retrieve a description from the wiki for macro {} Немагчыма атрымаць апісанне з вікі-старонкі для макраса {} - + Unable to open macro code URL {} Немагчыма адчыніць URL-адрас {} коду макраса - + Unable to fetch macro-specified file {} from {} Немагчыма выняць паказаны файл макраса {} з {} - + Could not locate macro-specified file {} (expected at {}) Не атрымалася знайсці паказаны файл макраса {} (чакаецца ў {}) - + {}: Unrecognized internal workbench '{}' {}: Непрызнаны ўнутраны варштат '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Папярэджанне распрацоўкі дадатку: URL-адрас сховішча, які ўсталяваны ў файле package.xml для дадатку {} ({}) не адпавядае спасылку, з якога ён быў выняты ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Папярэджанне распрацоўкі дадатку: галіна сховішча, якая ўсталявана ў файле package.xml для дадатку {} ({}) не адпавядае галіне, з якой яна была вынята ({}) - - + + Got an error when trying to import {} Адбылася памылка пры спробе імпартаваць {} @@ -2318,17 +2303,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Атрыманне апісання макрасу... - + Retrieving info from git Атрыманне інфармацыі з git - + Retrieving info from wiki Атрыманне інфармацыі з вікі @@ -2362,7 +2347,7 @@ installed addons will be checked for available updates Git branch rename failed with the following message: - Git branch rename failed with the following message: + Не атрымалася пераназваць галіну Git з наступным паведамленнем: @@ -2390,25 +2375,40 @@ installed addons will be checked for available updates магчыма, некаторыя дадаткі былі абноўленыя - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Не атрымалася спампаваць дадзеныя з {} - атрыманы код адказу {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Кіраванне дадаткамі - + Manage external workbenches, macros, and preference packs Кіраваць вонкавымі варштатамі, макрасамі і пакетамі пераваг @@ -2445,7 +2445,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Кіраванне дадаткамі diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm index 6f1afff640..4321f4e27f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index 56ef4a5b00..7ba31af529 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icona - + <b>Package Name</b> <b>Nom del paquet</b> - + Version Versió - + Description Descripció - + Update Available Update Available @@ -258,61 +258,6 @@ Voleu que el gestor de complements les instal·li automàticament? Trieu "I Addon Manager Gestor de complements - - - Downloading info... - S'està baixant la informació... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Refresh local cache - - - - Download and apply all available updates - Baixa i aplica totes les actualitzacions disponibles - - - - Update all Addons - Actualitza tots els complements - - - - Check for updates - Comprova si hi ha actualitzacions - - - - View and update Python package dependencies - Visualitza i actualitza les dependències dels paquets Python - - - - Python dependencies... - Dependències en Python... - - - - Developer tools... - Eines per a desenvolupadors... - - - - Close the Addon Manager - Tanca el gestor de complements - - - - Close - Tanca - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Servidor intermediari - + No proxy Sense servidor intermediari - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Opcions avançades - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1168,84 +1128,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Reinicia ara - + Restart later Reinicia més tard - - + + Refresh local cache Refresh local cache - + Updating cache... S'està actualitzant la memòria cau... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... S'estan comprovant les actualitzacions... - - Apply {} update(s) - Apply {} update(s) + + + Close + Tanca - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No hi ha actualizacions disponibles - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author Autor @@ -1266,7 +1257,7 @@ installed addons will be checked for available updates - + Update Actualitza @@ -1281,27 +1272,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1342,162 +1333,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Instal·la - + Uninstall Desinstal·la - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Canvia la branca - - - + Enable Habilita - + Disable Desactiva - + + Check for update + Check for update + + + + Run + executa + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1575,9 +1561,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1593,6 +1579,7 @@ installed addons will be checked for available updates + Workbench Banc de treball @@ -1777,19 +1764,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' executa - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1898,140 +1885,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Cerca... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Etiquetes - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Tot + + Addon Type + Addon Type - - Workbenches - Bancs de treball - - - - Macros - Macros - - - - Preference Packs - Preference Packs - - - - Status: - Estat: - - - + + Any Qualsevol - + + Macro + Macro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtre - - - OK - D'acord - DANGER: Developer feature @@ -2091,83 +2076,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2311,17 +2296,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2383,25 +2368,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2438,7 +2438,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Gestor de complements diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm index 856cb2abaa..8ed9777f8c 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index 8dae035b77..ee250eb6eb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikona - + <b>Package Name</b> <b>Název balíčku</b> - + Version Verze - + Description Popis - + Update Available Je dostupná aktualizace @@ -258,61 +258,6 @@ Přejete si, aby je správce doplňků automaticky nainstaloval? Vyberte "I Addon Manager Správce rozšíření - - - Downloading info... - Stahování informací... - - - - Stop the cache update - Zastavit aktualizaci - - - - Refresh local cache - Aktualizovat lokální mezipaměť - - - - Download and apply all available updates - Stáhnout a použít všechny dostupné aktualizace - - - - Update all Addons - Aktualizovat všechny doplňky - - - - Check for updates - Zkontrolovat aktualizace - - - - View and update Python package dependencies - Zobrazit a aktualizovat závislosti Python balíčků - - - - Python dependencies... - Python závislosti... - - - - Developer tools... - Vývojářské nástroje... - - - - Close the Addon Manager - Zavřít správce doplňků - - - - Close - Zavřít - Edit Tags @@ -599,76 +544,91 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Skrýt doplňky označené pouze Python 2 - + Hide Addons marked Obsolete Skrýt Zastaralé doplňky - + Hide Addons that require a newer version of FreeCAD Skrýt doplňky, které vyžadují novější verzi FreeCADu - + Custom repositories Vlastní repozitáře - + Proxy Proxy - + No proxy Nepoužívat proxy - + User system proxy Proxy uživatelského systému - + User-defined proxy: Uživatelem definované proxy: - + Path to git executable (optional): Cesta pro spuštění gitu (volitelné): - + The path to the git executable. Autodetected if needed and not specified. Cesta k spustitelnému programu git. Automaticky nalezeno, pokud je potřeba a není zadáno. - + Advanced Options Pokročilá nastavení - + Show option to change branches (requires git) Zobrazit možnost změny větví (vyžaduje git) - + Disable git (fall back to ZIP downloads only) Zakázat git (pouze pro stahování ZIP) - + Activate Addon Manager options intended for developers of new Addons. Aktivujte možnosti doplňků správce obsahu určené pro vývojáře nových doplňků. - + Addon developer mode Režim pro vývojáře @@ -1141,17 +1101,17 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace AddonsInstaller - + Starting up... Zahájení... - + Loading addon information Načítání informací o doplňku - + Worker process {} is taking a long time to stop... Pracovní proces {} trvá dlouho, než se zastaví... @@ -1170,84 +1130,115 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace - + Addon manager Správce rozšíření - + You must restart FreeCAD for changes to take effect. Aby se změny projevily, musíte FreeCAD restartovat. - + Restart now Restartovat nyní - + Restart later Restartovat později - - + + Refresh local cache Aktualizovat lokální mezipaměť - + Updating cache... Aktualizuji mezipaměť... - + Could not find addon '{}' to select Nelze najít doplněk '{}' pro výběr - - + + Checking for updates... Hledání aktualizací... - - Apply {} update(s) - Aplikovat {} aktualizace (s) + + + Close + Zavřít - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Nejsou k dispozici žádné aktualizace - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Nelze spustit nový instalační program, dokud nebude ukončena předchozí instalace. - + Execution of macro failed. See console for failure details. Provedení makra selhalo. Podrobnosti o selhání viz konzola. - - + + Maintainer Správce - - + + Author Autor @@ -1268,7 +1259,7 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace - + Update Aktualizovat @@ -1283,27 +1274,27 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace Nepodařilo se importovat QtNetwork -- zdá se, že není nainstalován ve vašem systému. Váš poskytovatel může mít balíček pro tuto závislost (často nazývaný "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Nepodařilo se převést zadaný port proxy '{}' na číslo portu - + Parameter error: mutually exclusive proxy options set. Resetting to default. Chyba parametru: oboustranně exkluzivní nastavení proxy možností. Resetování na výchozí. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Chyba parametru: indikován uživatelský proxy server, ale není k dispozici. Resetování na výchozí. - + Addon Manager: Unexpected {} response from server Správce doplňků: Neočekávaná {} odpověď od serveru - + Error with encrypted connection Chyba šifrovaného připojení @@ -1344,162 +1335,157 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace Odinstalace se nezdařila - + Version {version} installed on {date} Verze {version} nainstalována v {date} - + Version {version} installed Verze {version} nainstalována - + Installed on {date} Nainstalováno na {date} - - - - + + + + Installed Nainstalováno - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - Na větev {}, je k dispozici aktualizace - - - - Update available to version - Aktualizace je dostupná na verzi - - - - An update is available - K dispozici je aktualizace - - - + Git tag '{}' checked out, no updates possible Git značka '{}' prošla kontrolou, žádná aktualizace není možná - - This is the latest version available for branch {} - Toto je nejnovější verze dostupná pro větev {} - - - - Updated, please restart FreeCAD to use - Aktualizováno, prosím restartujte FreeCAD pro použití - - - + Update check in progress Probíhá kontrola aktualizací - - Automatic update checks disabled - Automatická kontrola aktualizací zakázána - - - + Installation location Umístění instalace - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Deaktivovány + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete VAROVÁNÍ: Tento doplněk je zastaralý - - WARNING: This addon is Python 2 Only - VAROVÁNÍ: Tento doplněk je pouze Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - VAROVÁNÍ: Tento doplněk vyžaduje FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. VAROVÁNÍ: Tento doplněk je v současné době nainstalován, ale je zakázán. Použijte tlačítko 'povolit' pro opětovné povolení. - + This Addon will be enabled next time you restart FreeCAD. Tento doplněk bude povolen při příštím restartu FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Tento doplněk bude zakázán při příštím restartu FreeCAD. - + Success Úspěšně - + Branch change succeeded, please restart to use the new version. Změna větve se podařila, prosím restartujte pro použití nové verze. - - Changed to git ref '{}' -- please restart to use Addon. - Změněno na git ref '{}' -- restartujte prosím pro použití Addon. - - - + Install Instalovat - + Uninstall Odinstalovat - - Check for Update - Zkontrolovat aktualizace - - - - Run Macro - Spustit makro - - - - Change Branch - Změnit větev - - - + Enable Povolit - + Disable Vypnout - + + Check for update + Check for update + + + + Run + Spustit + + + + Change branch... + Change branch... + + + Return to package list Zpět na seznam balíčků @@ -1577,9 +1563,9 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace Vyberte soubor ikony pro tuto položku obsahu + - {} is not a subdirectory of {} {} není podadresář {} @@ -1595,6 +1581,7 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace + Workbench Pracovní prostředí @@ -1779,19 +1766,19 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace - + A macro installed with the FreeCAD Addon Manager Makro nainstalované ve správci doplňků FreeCAD - + Run Indicates a macro that can be 'run' Spustit - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Nelze číst data z GitHubu: zkontrolujte připojení k Internetu a nastavení proxy a zkuste to znovu. @@ -1900,140 +1887,138 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace Vyberte soubor ikony pro tento balíček - + Filter is valid Filtr je platný - + Filter regular expression is invalid Regulární výraz filtru je neplatný - + + Search... + Hledat... + + + Click for details about package {} Klikněte pro podrobnosti o balíčku {} - + Click for details about workbench {} Klikněte pro podrobnosti o pracovním prostředí {} - + Click for details about macro {} Klikněte pro podrobnosti o makro {} - + Maintainers: Správci: - + Tags Štítky - + updated aktualizováno - - + + Up-to-date Aktualizováno - - - + + + + + Update available K dispozici je aktualizace + - Pending restart Čekající restart - - + + DISABLED VYPNOUT - + Installed version Nainstalovaná verze - + Unknown version Neznámá verze - + Installed on Nainstalováno - + Available version Dostupná verze - - Show Addons containing: - Zobrazit doplňky obsahující: + + Filter by... + Filter by... - - All - Vše + + Addon Type + Addon Type - - Workbenches - Pracovní prostředí - - - - Macros - Makra - - - - Preference Packs - Předvolby balíčků - - - - Status: - Stav: - - - + + Any Jakýkoli - + + Macro + Makro + + + + Preference Pack + Předvolby balíčku + + + + Installation Status + Installation Status + + + Not installed Není nainstalováno - + Filter Filtr - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace Instalace doplňku {} selhala - + Downloaded package.xml for {} Stažený package.xml pro {} - + Failed to decode {} file for Addon '{}' Nepodařilo se dekódovat {} soubor pro Addon '{}' - + Any dependency information in this file will be ignored Informace o závislosti v tomto souboru budou ignorovány - + Downloaded metadata.txt for {} Stažená metadata.txt pro {} - + Downloaded requirements.txt for {} Stažené požadavkys.txt pro {} - + Downloaded icon for {} Stažená ikona pro {} - + Unable to open macro wiki page at {} Nelze otevřít makro wiki stránku na {} - + Unable to fetch the code of this macro. Nelze načíst kód tohoto makra. - + Unable to retrieve a description from the wiki for macro {} Nelze načíst popis z wiki pro makro {} - + Unable to open macro code URL {} Nelze otevřít makro kód URL {} - + Unable to fetch macro-specified file {} from {} Nelze načíst makrostanovený soubor {} od {} - + Could not locate macro-specified file {} (expected at {}) Nelze najít makrospecifikovaný soubor {} (očekáváno v {}) - + {}: Unrecognized internal workbench '{}' {}: Nerozpoznaný interní pracovní stůl '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Varování pro vývojáře doplňku: URL adresa repozitáře nastavená v souboru addon {} ({}) neodpovídá URL adrese, ze které byla načtena ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Varování pro vývojáře doplňku: větev repozitáře nastavená v souboru package.xml pro addon {} ({}) neodpovídá větvi, ze které byla načtena ({}) - - + + Got an error when trying to import {} Došlo k chybě při pokusu o import {} @@ -2313,17 +2298,17 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace - + Retrieving macro description... Načítání popisu makro... - + Retrieving info from git Načítání informací z gitu - + Retrieving info from wiki Načítání informací z wiki @@ -2385,25 +2370,40 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace některé doplňky mohly být aktualizovány - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Správce doplňků - + Manage external workbenches, macros, and preference packs Správa externích pracovních kritérií, maker a balíčků preferencí @@ -2440,7 +2440,7 @@ nainstalované doplňky budou zkontrolovány pro dostupné aktualizace QObject - + Addon Manager Správce rozšíření diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm index 655ac0859e..2df0cd0227 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 1af7a66f7e..42a7ae87a8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -22,31 +22,31 @@ CompactView - + Icon Symbol - + <b>Package Name</b> <b>Paketname</b> - + Version Version - + Description Beschreibung - + Update Available Aktualisierung verfügbar @@ -258,61 +258,6 @@ Soll der Addon-Manager sie automatisch installieren? "Ignorieren" wäh Addon Manager Addon-Manager - - - Downloading info... - Info wird heruntergeladen... - - - - Stop the cache update - Cache-Update stoppen - - - - Refresh local cache - Lokalen Cache aktualisieren - - - - Download and apply all available updates - Alle verfügbaren Updates herunterladen und anwenden - - - - Update all Addons - Alle Addons aktualisieren - - - - Check for updates - Auf Aktualisierungen prüfen - - - - View and update Python package dependencies - Python-Paketabhängigkeiten anzeigen und aktualisieren - - - - Python dependencies... - Python-Abhängigkeiten... - - - - Developer tools... - Entwicklerwerkzeuge... - - - - Close the Addon Manager - Addon-Manager schließen - - - - Close - Schließen - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Nur für Python 2 markierte Addons ausblenden - + Hide Addons marked Obsolete Veraltete Addons ausblenden - + Hide Addons that require a newer version of FreeCAD Addons ausblenden, die eine neuere Version von FreeCAD voraussetzen - + Custom repositories Eigene Projektarchive - + Proxy Proxy - + No proxy Kein Proxy - + User system proxy Benutzer-System-Proxy - + User-defined proxy: Benutzerdefinierter Proxy: - + Path to git executable (optional): Pfad zu Git (optional): - + The path to the git executable. Autodetected if needed and not specified. Der Pfad zur ausführbaren Git-Datei. Wird automatisch erkannt, falls erforderlich und nicht angegeben. - + Advanced Options Erweiterte Optionen - + Show option to change branches (requires git) Option zum Ändern von Zweigen anzeigen (erfordert git) - + Disable git (fall back to ZIP downloads only) Git deaktivieren (reine ZIP-Downloads) - + Activate Addon Manager options intended for developers of new Addons. Aktivieren Sie Addon-Manager-Optionen für Entwickler neuer Addons. - + Addon developer mode Addon-Entwickler-Modus @@ -956,7 +916,7 @@ installed addons will be checked for available updates Change to branch: - Change to branch: + Git-Branch wechseln: @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Wird gestartet... - + Loading addon information Lädt Addon-Informationen - + Worker process {} is taking a long time to stop... Arbeitsprozess {} braucht lange, um beendet zu werden... @@ -1168,84 +1128,115 @@ installed addons will be checked for available updates - + Addon manager Addon-Manager - + You must restart FreeCAD for changes to take effect. FreeCAD muss neu gestartet werden, damit die Änderungen wirksam werden. - + Restart now Jetzt neu starten - + Restart later Später neu starten - - + + Refresh local cache Lokalen Cache aktualisieren - + Updating cache... Cache wird aktualisiert... - + Could not find addon '{}' to select Add-on '{}' zur Auswahl nicht gefunden - - + + Checking for updates... Sucht nach Updates... - - Apply {} update(s) - {} Update(s) anwenden + + + Close + Schließen - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Keine Aktualisierungen verfügbar - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Ein neuer Installer kann erst nach Beendigung des Vorherigen gestartet werden. - + Execution of macro failed. See console for failure details. Ausführen des Makros schlug fehl. Siehe Konsole für Fehlerdetails. - - + + Maintainer Betreuer - - + + Author Autor @@ -1266,7 +1257,7 @@ installed addons will be checked for available updates - + Update Aktualisierung @@ -1281,27 +1272,27 @@ installed addons will be checked for available updates QtNetwork konnte nicht importiert werden - es scheint nicht auf diesem System installiert zu sein. Dein Anbieter könnte ein Paket für diese Abhängigkeit haben (oft "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Konnte den angegebenen Proxy-Port '{}' nicht in eine Portnummer umwandeln - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameterfehler: sich gegenseitig ausschließende Proxy-Optionen eingestellt. Wird auf Standard zurückgesetzt. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameterfehler: Benutzerdefinierter Proxy ausgewählt, aber kein Proxy angegeben. Wird auf Standard zurückgesetzt. - + Addon Manager: Unexpected {} response from server Addon-Manager: Unerwartete {} Antwort vom Server - + Error with encrypted connection Fehler mit verschlüsselter Verbindung @@ -1342,162 +1333,157 @@ installed addons will be checked for available updates Deinstallation fehlgeschlagen - + Version {version} installed on {date} Version {version} installiert am {date} - + Version {version} installed Version {version} installiert - + Installed on {date} Installiert am {date} - - - - + + + + Installed Installiert - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Derzeit auf Branch {}, Name geändert zu {} - - On branch {}, update available to version - Auf Zweig {}, Aktualisierung verfügbar auf Version - - - - Update available to version - Update verfügbar auf Version - - - - An update is available - Ein Update ist verfügbar - - - + Git tag '{}' checked out, no updates possible Git Tag '{}' ausgecheckt, keine Aktualisierungen möglich - - This is the latest version available for branch {} - Dies ist die neueste verfügbare Version für den Zweig {} - - - - Updated, please restart FreeCAD to use - Aktualisiert, bitte FreeCAD zur Nutzung neu starten - - - + Update check in progress Prüfung der Aktualisierung läuft - - Automatic update checks disabled - Automatische Überprüfung der Aktualisierungen deaktiviert - - - + Installation location Speicherort für die Installation - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Deaktiviert + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNUNG: Dieses Addon ist veraltet - - WARNING: This addon is Python 2 Only - WARNUNG: Dieses Addon ist nur für Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNUNG: Dieses Addon benötigt FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNUNG: Dieses Add-on ist derzeit installiert, aber deaktiviert. Verwenden Sie die Schaltfläche 'aktivieren', um es wieder zu aktivieren. - + This Addon will be enabled next time you restart FreeCAD. Dieses Addon wird beim nächsten Neustart von FreeCAD aktiviert. - + This Addon will be disabled next time you restart FreeCAD. Dieses Addon wird beim nächsten Neustart von FreeCAD deaktiviert. - + Success Erfolgreich - + Branch change succeeded, please restart to use the new version. Branch wechsel erfolgreich, bitte starten Sie neu, um die neue Version zu verwenden. - - Changed to git ref '{}' -- please restart to use Addon. - Wechsel zu git ref '{}' -- bitte neu starten, um das Add-on zu nutzen. - - - + Install Installieren - + Uninstall Deinstallieren - - Check for Update - Auf Aktualisierungen prüfen - - - - Run Macro - Makro ausführen - - - - Change Branch - Git-Branch wechseln - - - + Enable Aktivieren - + Disable Deaktivieren - + + Check for update + Check for update + + + + Run + laufen + + + + Change branch... + Change branch... + + + Return to package list Zurück zur Paketliste @@ -1556,7 +1542,7 @@ installed addons will be checked for available updates Failed to create installation manifest file: - Failed to create installation manifest file: + Fehler beim Erstellen der Installations-Manifest-Datei: @@ -1575,9 +1561,9 @@ installed addons will be checked for available updates Wählen Sie eine Symboldatei für dieses Inhaltselement + - {} is not a subdirectory of {} {} ist kein Unterverzeichnis von {} @@ -1593,6 +1579,7 @@ installed addons will be checked for available updates + Workbench Arbeitsbereich @@ -1777,19 +1764,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Ein Makro, das mit dem FreeCAD Addon Manager installiert wurde - + Run Indicates a macro that can be 'run' Ausführen - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Daten von GitHub konnten nicht gelesen werden: Überprüfe deine Internetverbindung und die Proxy-Einstellungen und versuche es erneut. @@ -1898,140 +1885,138 @@ installed addons will be checked for available updates Eine Symboldatei für dieses Paket auswählen - + Filter is valid Filter ist gültig - + Filter regular expression is invalid Der Filter regulärer Ausdruck ist ungültig - + + Search... + Suche... + + + Click for details about package {} Klicken für Details zum Paket {} - + Click for details about workbench {} Klicken für Details zum Arbeitsbereich {} - + Click for details about macro {} Klicken für Details zum Makro {} - + Maintainers: Betreuer: - + Tags Schlagwörter - + updated aktualisiert - - + + Up-to-date Auf dem neuesten Stand - - - + + + + + Update available Aktualisierung verfügbar + - Pending restart Ausstehender Neustart - - + + DISABLED DEAKTIVIERT - + Installed version Installierte Version - + Unknown version Unbekannte Version - + Installed on Installiert am - + Available version Verfügbare Version - - Show Addons containing: - Addons anzeigen, die Folgendes enthalten: + + Filter by... + Filter by... - - All - Alle + + Addon Type + Addon Type - - Workbenches - Arbeitsbereiche - - - - Macros - Makros - - - - Preference Packs - Voreinstellungspaket - - - - Status: - Status: - - - + + Any Alle - + + Macro + Makro + + + + Preference Pack + Voreinstellungspaket + + + + Installation Status + Installation Status + + + Not installed Nicht installiert - + Filter Filter - - - OK - OK - DANGER: Developer feature @@ -2056,19 +2041,19 @@ installed addons will be checked for available updates Local Table header for local git ref name - Local + Lokal Remote tracking Table header for git remote tracking branch name - Remote tracking + Entfernte Nachverfolgung (Remote) Last Updated Table header for git update date - Last Updated + Zuletzt aktualisiert @@ -2091,83 +2076,83 @@ installed addons will be checked for available updates Installation des Addons {} fehlgeschlagen - + Downloaded package.xml for {} package.xml für {} heruntergeladen - + Failed to decode {} file for Addon '{}' Datei {} für Add-on '{}' konnte nicht dekodiert werden - + Any dependency information in this file will be ignored Alle Abhängigkeitsinformationen in dieser Datei werden ignoriert - + Downloaded metadata.txt for {} metadata.txt für {} heruntergeladen - + Downloaded requirements.txt for {} requirements.txt für {} heruntergeladen - + Downloaded icon for {} Symbol für {} heruntergeladen - + Unable to open macro wiki page at {} Makro-Wiki-Seite unter {} kann nicht geöffnet werden - + Unable to fetch the code of this macro. Der Code dieses Makros konnte nicht abgerufen werden. - + Unable to retrieve a description from the wiki for macro {} Konnte keine Beschreibung aus dem Wiki für Makro {} holen - + Unable to open macro code URL {} Makro-Code kann nicht geöffnet werden URL {} - + Unable to fetch macro-specified file {} from {} Makrospezifizierte Datei {} von {} konnte nicht abgerufen werden - + Could not locate macro-specified file {} (expected at {}) Datei {} konnte nicht gefunden werden (erwartet um {}) - + {}: Unrecognized internal workbench '{}' {}: Unbekannter interner Arbeitsbereich '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Add-on Entwickler Warnung: Die in der Datei package.xml für das Add-on {} ({}) angegebene Repository-URL stimmt nicht mit der URL überein, von der es abgerufen wurde ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Add-on Entwickler Warnung: Der in der package.xml-Datei für das Add-on {} ({}) angegebene Repository-Branch stimmt nicht mit dem Branch überein, aus dem es geholt wurde ({}) - - + + Got an error when trying to import {} Fehler beim Importieren von {} @@ -2311,17 +2296,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Makro-Beschreibung wird abgerufen... - + Retrieving info from git Informationen werden von Git abgerufen - + Retrieving info from wiki Informationen werden aus den Wiki abgerufen @@ -2355,7 +2340,7 @@ installed addons will be checked for available updates Git branch rename failed with the following message: - Git branch rename failed with the following message: + Umbenennen des Git Branches mit der folgenden Nachricht fehlgeschlagen: @@ -2383,25 +2368,40 @@ installed addons will be checked for available updates Einige Addons wurden möglicherweise aktualisiert - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Fehler beim Herunterladen der Daten von {} -- Empfangener Antwortcode {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Addon-Manager - + Manage external workbenches, macros, and preference packs Verwaltet externe Arbeitsbereiche, Makros und Voreinstellungspakete @@ -2438,7 +2438,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Addon-Manager diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm index ebdc86b95d..e38e69512f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index 515bcc8546..ebbe03531d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -22,31 +22,31 @@ CompactView - + Icon Εικονίδιο - + <b>Package Name</b> <b>Όνομα πακέτου</b> - + Version Έκδοση - + Description Περιγραφή - + Update Available Διαθέσιμη Ενημέρωση @@ -259,61 +259,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Διαχειριστής Πρόσθετων - - - Downloading info... - Γίνεται λήψη πληροφοριών... - - - - Stop the cache update - Διακοπή ενημέρωσης προσωρινής μνήμης - - - - Refresh local cache - Ανανέωση τοπικής προσωρινής μνήμης - - - - Download and apply all available updates - Λήψη και εφαρμογή όλων των διαθέσιμων ενημερώσεων - - - - Update all Addons - Ενημέρωση όλων των προσθέτων - - - - Check for updates - Έλεγχος για ενημερώσεις - - - - View and update Python package dependencies - Προβολή και ενημέρωση εξαρτήσεων πακέτων Python - - - - Python dependencies... - Εξαρτήσεις για Python... - - - - Developer tools... - Εργαλεία για προγραμματιστές... - - - - Close the Addon Manager - Κλείσιμο του Διαχειριστή Προσθέτων - - - - Close - Κλείσιμο - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy No proxy - + User system proxy Διακομιστής συστήματος χρήστη - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Προχωρημένες Ρυθμίσεις - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1142,17 +1102,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1171,84 +1131,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Ανανέωση τοπικής προσωρινής μνήμης - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Κλείσιμο - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Συντηρητής - - + + Author Συγγραφέας @@ -1269,7 +1260,7 @@ installed addons will be checked for available updates - + Update Ενημέρωση @@ -1284,27 +1275,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1345,162 +1336,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Εγκατάσταση - + Uninstall Απεγκατάσταση - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Αλλαγή Κλάδου - - - + Enable Ενεργοποίηση - + Disable Απενεργοποίηση - + + Check for update + Check for update + + + + Run + Εκτέλεση + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1578,9 +1564,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1596,6 +1582,7 @@ installed addons will be checked for available updates + Workbench Πάγκος εργασίας @@ -1780,19 +1767,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Εκτέλεση - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1901,140 +1888,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Αναζήτηση... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Ετικέτες - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Εγκατεστημένη έκδοση - + Unknown version Unknown version - + Installed on Installed on - + Available version Διαθέσιμη έκδοση - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Όλα + + Addon Type + Addon Type - - Workbenches - Πάγκοι Εργασίας - - - - Macros - Μακροεντολές - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Οποιαδήποτε - + + Macro + Μακροεντολή + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Φίλτρο - - - OK - ΟΚ - DANGER: Developer feature @@ -2094,83 +2079,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2314,17 +2299,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2386,25 +2371,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2441,7 +2441,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Διαχειριστής Πρόσθετων diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm index 9a783da4e9..b24200024d 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts index 3cb7eb7cce..f14411e0f3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ícono - + <b>Package Name</b> <b>Nombre del paquete</b> - + Version Versión - + Description Descripción - + Update Available Actualización disponible @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Administrador de Complementos - - - Downloading info... - Descargando información... - - - - Stop the cache update - Detener la actualización del caché - - - - Refresh local cache - Actualizar caché local - - - - Download and apply all available updates - Descarga y aplica todas las actualizaciones disponibles - - - - Update all Addons - Actualizar todos los complementos - - - - Check for updates - Comprobar actualizaciones - - - - View and update Python package dependencies - Ver y actualizar las dependencias del paquete Python - - - - Python dependencies... - Dependencias de Python... - - - - Developer tools... - Herramientas de desarrollador... - - - - Close the Addon Manager - Cierra el Administrador de Complementos - - - - Close - Cerrar - Edit Tags @@ -599,76 +544,91 @@ los complementos instalados serán revisados por actualizaciones disponibles + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Ocultar complementos marcados Python 2 solamente - + Hide Addons marked Obsolete Ocultar complementos marcados como obsoletos - + Hide Addons that require a newer version of FreeCAD Ocultar complementos que requieren una versión más reciente de FreeCAD - + Custom repositories Repositorios personalizados - + Proxy Proxy - + No proxy Sin proxy - + User system proxy Proxy del sistema de usuario - + User-defined proxy: Proxy definido por el usuario: - + Path to git executable (optional): Ruta al ejecutable de git (opcional): - + The path to the git executable. Autodetected if needed and not specified. La ruta al ejecutable de git. Detectado automáticamente si es necesario y no especificado. - + Advanced Options Opciones avanzadas - + Show option to change branches (requires git) Mostrar opción para cambiar ramas (requiere git) - + Disable git (fall back to ZIP downloads only) Desactivar git (solo para descargas ZIP) - + Activate Addon Manager options intended for developers of new Addons. Activar opciones del Administrador de Complementos destinadas a los desarrolladores de nuevos complementos. - + Addon developer mode Modo de desarrollador de complemento @@ -958,7 +918,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Change to branch: - Change to branch: + Cambiar a rama: @@ -1141,17 +1101,17 @@ los complementos instalados serán revisados por actualizaciones disponibles AddonsInstaller - + Starting up... Iniciando... - + Loading addon information Cargando información del complemento - + Worker process {} is taking a long time to stop... Proceso en ejecución {} está tomando mucho tiempo en culminar. @@ -1168,84 +1128,115 @@ los complementos instalados serán revisados por actualizaciones disponibles Se cambió la lista personalizada de repositorios, forzando carga en memoria... - + Addon manager Administrador de complementos - + You must restart FreeCAD for changes to take effect. Debe reiniciar FreeCAD para que los cambios surtan efecto. - + Restart now Reiniciar ahora - + Restart later Reiniciar más adelante - - + + Refresh local cache Actualizar caché local - + Updating cache... Actualizando la información en memoria - + Could not find addon '{}' to select No se pudo encontrar el complemento '{}' para seleccionar - - + + Checking for updates... Buscando actualizaciones... - - Apply {} update(s) - Aplicar {} actualización(es) + + + Close + Cerrar - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No hay actualizaciones disponibles - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. No se puede iniciar un nuevo instalador hasta que el anterior haya terminado. - + Execution of macro failed. See console for failure details. Falló la ejecución de la macro. Vea la consola para detalles del fallo. - - + + Maintainer Mantenedor - - + + Author Autor @@ -1266,7 +1257,7 @@ los complementos instalados serán revisados por actualizaciones disponibles - + Update Actualizar @@ -1281,27 +1272,27 @@ los complementos instalados serán revisados por actualizaciones disponibles No se pudo importar QtNetwork -- parece que no está instalado en su sistema. Su proveedor puede tener un paquete para esta dependencia (a menudo llamado "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Error al convertir el puerto proxy especificado '{}' a un número de puerto - + Parameter error: mutually exclusive proxy options set. Resetting to default. Error de parámetro: conjunto de opciones de proxy mutuamente exclusivas. Reiniciando a valores predeterminados. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Error de parámetro: se indicado proxy de usuario pero no se proporcionó proxy. Reiniciando al valor predeterminado. - + Addon Manager: Unexpected {} response from server Administrador de complementos: Respuesta {} inesperada del servidor - + Error with encrypted connection Error con conexión cifrada @@ -1342,162 +1333,157 @@ los complementos instalados serán revisados por actualizaciones disponibles Desinstalación fallida - + Version {version} installed on {date} Versión {version} instalada el {date} - + Version {version} installed Versión {version} instalada - + Installed on {date} Instalado el {date} - - - - + + + + Installed Instalado - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Actualmente en la rama {}, nombre cambiado a {} - - On branch {}, update available to version - En la rama {}, actualización disponible a la versión - - - - Update available to version - Actualización disponible a la versión - - - - An update is available - Una actualización está disponible - - - + Git tag '{}' checked out, no updates possible Etiqueta Git '{}' marcada, no es posible actualizar - - This is the latest version available for branch {} - Esta es la última versión disponible para la rama {} - - - - Updated, please restart FreeCAD to use - Actualizado, reinicie FreeCAD para usar - - - + Update check in progress Comprobación de actualizaciones en progreso - - Automatic update checks disabled - Comprobación de actualizaciones automáticas deshabilitada - - - + Installation location Ubicación de instalación - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete ATENCIÓN: Este complemento está obsoleto - - WARNING: This addon is Python 2 Only - ATENCIÓN: Este complemento es sólo Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - ADVERTENCIA: Este complemento requiere FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ADVERTENCIA: Este complemento está actualmente instalado, pero desactivado. Utilice el botón 'habilitar' para reactivarlo. - + This Addon will be enabled next time you restart FreeCAD. Este complemento se habilitará la próxima vez que reinicie FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Este complemento se desactivará la próxima vez que reinicie FreeCAD. - + Success Éxito - + Branch change succeeded, please restart to use the new version. Cambio de rama exitoso, por favor reinicie para usar la nueva versión. - - Changed to git ref '{}' -- please restart to use Addon. - Cambiado a git ref '{}' -- por favor reinicie para usar Complemento. - - - + Install Instalar - + Uninstall Desinstalar - - Check for Update - Buscar actualizaciones - - - - Run Macro - Ejecutar Macro - - - - Change Branch - Cambiar Rama - - - + Enable Habilitar - + Disable Desactivar - + + Check for update + Check for update + + + + Run + Ejecutar + + + + Change branch... + Change branch... + + + Return to package list Volver a la lista de paquetes @@ -1556,7 +1542,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Failed to create installation manifest file: - Failed to create installation manifest file: + Error al crear archivo manifest de instalación: @@ -1575,9 +1561,9 @@ los complementos instalados serán revisados por actualizaciones disponibles Seleccione un archivo de icono para este elemento de contenido + - {} is not a subdirectory of {} {} no es un subdirectorio de {} @@ -1593,6 +1579,7 @@ los complementos instalados serán revisados por actualizaciones disponibles + Workbench Banco de trabajo @@ -1777,19 +1764,19 @@ los complementos instalados serán revisados por actualizaciones disponibles - + A macro installed with the FreeCAD Addon Manager Una macro instalada con el Administrador de Complementos de FreeCAD - + Run Indicates a macro that can be 'run' Ejecutar - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. No se han podido leer los datos de GitHub: comprueba tu conexión a Internet y la configuración del proxy e intente de nuevo. @@ -1898,140 +1885,138 @@ los complementos instalados serán revisados por actualizaciones disponibles Seleccione un ícono para este paquete - + Filter is valid El filtro es válido - + Filter regular expression is invalid La expresión regular del filtro no es válida - + + Search... + Búsqueda... + + + Click for details about package {} Haga clic para obtener detalles sobre el paquete {} - + Click for details about workbench {} Haga clic para obtener detalles sobre el entorno de trabajo {} - + Click for details about macro {} Haga clic para obtener detalles sobre la macro {} - + Maintainers: Mantenedores: - + Tags Etiquetas - + updated actualizado - - + + Up-to-date Al día - - - + + + + + Update available Actualización disponible + - Pending restart Reinicio pendiente - - + + DISABLED DESHABILITADO - + Installed version Versión instalada - + Unknown version Versión desconocida - + Installed on Instalado el - + Available version Versión disponible - - Show Addons containing: - Mostrar complementos que contienen: + + Filter by... + Filter by... - - All - Todos + + Addon Type + Addon Type - - Workbenches - Bancos de trabajo - - - - Macros - Macros - - - - Preference Packs - Paquetes de preferencias - - - - Status: - Estado: - - - + + Any Cualquiera - + + Macro + Macro + + + + Preference Pack + Paquete de preferencias + + + + Installation Status + Installation Status + + + Not installed No instalado - + Filter Filtro - - - OK - Aceptar - DANGER: Developer feature @@ -2056,19 +2041,19 @@ los complementos instalados serán revisados por actualizaciones disponibles Local Table header for local git ref name - Local + Local Remote tracking Table header for git remote tracking branch name - Remote tracking + Rastreo remoto Last Updated Table header for git update date - Last Updated + Última actualización @@ -2091,83 +2076,83 @@ los complementos instalados serán revisados por actualizaciones disponibles La instalación del complemento {} falló - + Downloaded package.xml for {} Se descargó package.xml para {} - + Failed to decode {} file for Addon '{}' Error al decodificar archivo {} para el complemento '{}' - + Any dependency information in this file will be ignored Cualquier información de dependencia en este archivo será ignorada - + Downloaded metadata.txt for {} Se descargó metadata.txt para {} - + Downloaded requirements.txt for {} Se descargó requirements.txt para {} - + Downloaded icon for {} Se descargó icono para {} - + Unable to open macro wiki page at {} No se puede abrir la página de la wiki de la macro en {} - + Unable to fetch the code of this macro. No se puede obtener el código de esta macro. - + Unable to retrieve a description from the wiki for macro {} No se puede recuperar una descripción de la wiki para la macro {} - + Unable to open macro code URL {} No se puede abrir la URL del código de la macro {} - + Unable to fetch macro-specified file {} from {} No se puede obtener el archivo especificado macro {} de {} - + Could not locate macro-specified file {} (expected at {}) No se pudo encontrar el archivo especificado macro {} (se esperaba en {}) - + {}: Unrecognized internal workbench '{}' {}: Entorno de trabajo interno no reconocido '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Advertencia de desarrollador de complementos: la URL del repositorio establecida en el archivo package.xml para el complemento {} ({}) no coincide con la URL de la que fue obtenida ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Advertencia de desarrollador de complementos: la rama de repositorio establecida en el archivo package.xml para el complemento {} ({}) no coincide con la rama de la que fue obtenida ({}) - - + + Got an error when trying to import {} Se ha producido un error al intentar importar {} @@ -2311,17 +2296,17 @@ los complementos instalados serán revisados por actualizaciones disponibles - + Retrieving macro description... Recuperando descripción de macro... - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de la wiki @@ -2355,7 +2340,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Git branch rename failed with the following message: - Git branch rename failed with the following message: + Error al renombrar la rama Git con el siguiente mensaje: @@ -2383,25 +2368,40 @@ los complementos instalados serán revisados por actualizaciones disponibles algunos complementos pueden haber sido actualizados - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Error al descargar datos de {} -- código de respuesta recibido {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Administrador de complementos - + Manage external workbenches, macros, and preference packs Administrar entornos de trabajo externos, macros y paquetes de preferencias @@ -2438,7 +2438,7 @@ los complementos instalados serán revisados por actualizaciones disponibles QObject - + Addon Manager Administrador de Complementos diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm index 1863c9fcaf..60fcb6b59e 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index a85ae72130..1dd9f949d5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icono - + <b>Package Name</b> <b>Nombre del paquete</b> - + Version Versión - + Description Descripción - + Update Available Actualización disponible @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Gestor de complementos - - - Downloading info... - Descargando información... - - - - Stop the cache update - Detener la actualización de caché - - - - Refresh local cache - Actualizar caché local - - - - Download and apply all available updates - Descargar y aplicar todas las actualizaciones disponibles - - - - Update all Addons - Actualizar todos los complementos - - - - Check for updates - Comprobar actualizaciones - - - - View and update Python package dependencies - Ver y actualizar las dependencias del paquete Python - - - - Python dependencies... - Dependencias de Python... - - - - Developer tools... - Herramientas del desarrollador... - - - - Close the Addon Manager - Cerrar el gestor de complementos - - - - Close - Cerrar - Edit Tags @@ -598,76 +543,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Ocultar complementos marcados como sólo Python 2 - + Hide Addons marked Obsolete Ocultar complementos marcados como obsoletos - + Hide Addons that require a newer version of FreeCAD Ocultar complementos que requieran una versión más reciente de FreeCAD - + Custom repositories Repositorios personalizados - + Proxy Proxy - + No proxy Sin proxy - + User system proxy Usar proxy del sistema - + User-defined proxy: Proxy definido por el usuario: - + Path to git executable (optional): Ruta al ejecutable de git (opcional): - + The path to the git executable. Autodetected if needed and not specified. La ruta al ejecutable de git. Detectado automáticamente si es necesario y no especificado. - + Advanced Options Opciones avanzadas - + Show option to change branches (requires git) Mostrar opción para cambiar ramas (requiere git) - + Disable git (fall back to ZIP downloads only) Desactivar git (solo para descargas ZIP) - + Activate Addon Manager options intended for developers of new Addons. Activar opciones de gestor de complementos destinadas a los desarrolladores de nuevos complementos. - + Addon developer mode Modo de desarrollador de complemento @@ -957,7 +917,7 @@ installed addons will be checked for available updates Change to branch: - Change to branch: + Cambiar a rama: @@ -1140,17 +1100,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Iniciando... - + Loading addon information Cargando información del complemento - + Worker process {} is taking a long time to stop... Proceso en ejecución {} está tomando mucho tiempo en culminar. @@ -1167,84 +1127,115 @@ installed addons will be checked for available updates Se cambió la lista personalizada de repositorios, forzando carga en memoria... - + Addon manager Administrador de complementos - + You must restart FreeCAD for changes to take effect. Debe reiniciar FreeCAD para que los cambios surtan efecto. - + Restart now Reiniciar ahora - + Restart later Reiniciar más adelante - - + + Refresh local cache Actualizar caché local - + Updating cache... Actualizando la información en memoria - + Could not find addon '{}' to select No se pudo encontrar el complemento '{}' para seleccionar - - + + Checking for updates... Buscando actualizaciones... - - Apply {} update(s) - Aplicar {} actualización(es) + + + Close + Cerrar - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No hay actualizaciones disponibles - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. No se puede iniciar un nuevo instalador hasta que el anterior haya terminado. - + Execution of macro failed. See console for failure details. Falló la ejecución de la macro. Vea la consola para detalles del fallo. - - + + Maintainer Mantenedor - - + + Author Autor @@ -1265,7 +1256,7 @@ installed addons will be checked for available updates - + Update Actualizar @@ -1280,27 +1271,27 @@ installed addons will be checked for available updates No se pudo importar QtNetwork -- parece que no está instalado en su sistema. Su proveedor puede tener un paquete para esta dependencia (a menudo llamado "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Error al convertir el puerto proxy especificado '{}' a un número de puerto - + Parameter error: mutually exclusive proxy options set. Resetting to default. Error de parámetro: conjunto de opciones de proxy mutuamente exclusivas. Reiniciando a valores predeterminados. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Error de parámetro: se indicado proxy de usuario pero no se proporcionó proxy. Reiniciando al valor predeterminado. - + Addon Manager: Unexpected {} response from server Administrador de complementos: Respuesta {} inesperada del servidor - + Error with encrypted connection Error con conexión cifrada @@ -1341,162 +1332,157 @@ installed addons will be checked for available updates Desinstalación fallida - + Version {version} installed on {date} Versión {version} instalada el {date} - + Version {version} installed Versión {version} instalada - + Installed on {date} Instalado el {date} - - - - + + + + Installed Instalado - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Actualmente en la rama {}, nombre cambiado a {} - - On branch {}, update available to version - En la rama {}, actualización disponible a la versión - - - - Update available to version - Actualización disponible a la versión - - - - An update is available - Una actualización está disponible - - - + Git tag '{}' checked out, no updates possible Etiqueta Git '{}' marcada, no es posible actualizar - - This is the latest version available for branch {} - Esta es la última versión disponible para la rama {} - - - - Updated, please restart FreeCAD to use - Actualizado, reinicie FreeCAD para usar - - - + Update check in progress Comprobación de actualizaciones en progreso - - Automatic update checks disabled - Comprobación de actualizaciones automáticas deshabilitada - - - + Installation location Ubicación de instalación - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete ATENCIÓN: Este complemento está obsoleto - - WARNING: This addon is Python 2 Only - ATENCIÓN: Este complemento es sólo Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - ADVERTENCIA: Este complemento requiere FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ADVERTENCIA: Este complemento está actualmente instalado, pero desactivado. Utilice el botón 'habilitar' para reactivarlo. - + This Addon will be enabled next time you restart FreeCAD. Este complemento se habilitará la próxima vez que reinicie FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Este complemento se desactivará la próxima vez que reinicie FreeCAD. - + Success Éxito - + Branch change succeeded, please restart to use the new version. Cambio de rama exitoso, por favor reinicie para usar la nueva versión. - - Changed to git ref '{}' -- please restart to use Addon. - Cambiado a git ref '{}' -- por favor reinicie para usar Complemento. - - - + Install Instalar - + Uninstall Desinstalar - - Check for Update - Buscar actualizaciones - - - - Run Macro - Ejecutar Macro - - - - Change Branch - Cambiar Rama - - - + Enable Habilitar - + Disable Deshabilitar - + + Check for update + Check for update + + + + Run + ejecutar + + + + Change branch... + Change branch... + + + Return to package list Volver a la lista de paquetes @@ -1555,7 +1541,7 @@ installed addons will be checked for available updates Failed to create installation manifest file: - Failed to create installation manifest file: + Error al crear archivo manifest de instalación: @@ -1574,9 +1560,9 @@ installed addons will be checked for available updates Seleccione un archivo de icono para este elemento de contenido + - {} is not a subdirectory of {} {} no es un subdirectorio de {} @@ -1592,6 +1578,7 @@ installed addons will be checked for available updates + Workbench Entorno de trabajo @@ -1776,19 +1763,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Una macro instalada con el gestor de complementos de FreeCAD - + Run Indicates a macro that can be 'run' ejecutar - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. No se han podido leer los datos de GitHub: comprueba tu conexión a Internet y la configuración del proxy e intente de nuevo. @@ -1897,140 +1884,138 @@ installed addons will be checked for available updates Seleccione un ícono para este paquete - + Filter is valid El filtro es válido - + Filter regular expression is invalid La expresión regular del filtro no es válida - + + Search... + Buscar... + + + Click for details about package {} Haga clic para obtener detalles sobre el paquete {} - + Click for details about workbench {} Haga clic para obtener detalles sobre el entorno de trabajo {} - + Click for details about macro {} Haga clic para obtener detalles sobre la macro {} - + Maintainers: Mantenedores: - + Tags Etiquetas - + updated actualizado - - + + Up-to-date Al día - - - + + + + + Update available Actualización disponible + - Pending restart Reinicio pendiente - - + + DISABLED DESHABILITADO - + Installed version Versión instalada - + Unknown version Versión desconocida - + Installed on Instalado el - + Available version Versión disponible - - Show Addons containing: - Mostrar complementos que contienen: + + Filter by... + Filter by... - - All - Todo + + Addon Type + Addon Type - - Workbenches - Entornos de trabajo - - - - Macros - Macros - - - - Preference Packs - Paquetes de preferencias - - - - Status: - Estado: - - - + + Any Cualquiera - + + Macro + Macro + + + + Preference Pack + Paquete de preferencias + + + + Installation Status + Installation Status + + + Not installed No instalado - + Filter Filtro - - - OK - Aceptar - DANGER: Developer feature @@ -2055,19 +2040,19 @@ installed addons will be checked for available updates Local Table header for local git ref name - Local + Local Remote tracking Table header for git remote tracking branch name - Remote tracking + Rastreo remoto Last Updated Table header for git update date - Last Updated + Actualizado por última vez @@ -2090,83 +2075,83 @@ installed addons will be checked for available updates La instalación del complemento {} falló - + Downloaded package.xml for {} Se descargó package.xml para {} - + Failed to decode {} file for Addon '{}' Error al decodificar archivo {} para el complemento '{}' - + Any dependency information in this file will be ignored Cualquier información de dependencia en este archivo será ignorada - + Downloaded metadata.txt for {} Se descargó metadata.txt para {} - + Downloaded requirements.txt for {} Se descargó requirements.txt para {} - + Downloaded icon for {} Se descargó icono para {} - + Unable to open macro wiki page at {} No se puede abrir la página de la wiki de la macro en {} - + Unable to fetch the code of this macro. No se puede obtener el código de esta macro. - + Unable to retrieve a description from the wiki for macro {} No se puede recuperar una descripción de la wiki para la macro {} - + Unable to open macro code URL {} No se puede abrir la URL del código de la macro {} - + Unable to fetch macro-specified file {} from {} No se puede obtener el archivo especificado macro {} de {} - + Could not locate macro-specified file {} (expected at {}) No se pudo encontrar el archivo especifico para la macro {} (se esperaba en {}) - + {}: Unrecognized internal workbench '{}' {}: Entorno de trabajo interno no reconocido '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Advertencia de desarrollador de complementos: la URL del repositorio establecida en el archivo package.xml para el complemento {} ({}) no coincide con la URL de la que fue obtenida ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Advertencia de desarrollador de complementos: la rama de repositorio establecida en el archivo package.xml para el complemento {} ({}) no coincide con la rama de la que fue obtenida ({}) - - + + Got an error when trying to import {} Se ha producido un error al intentar importar {} @@ -2310,17 +2295,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Recuperando descripción de macro... - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de la wiki @@ -2354,7 +2339,7 @@ installed addons will be checked for available updates Git branch rename failed with the following message: - Git branch rename failed with the following message: + Error al renombrar la rama Git con el siguiente mensaje: @@ -2382,25 +2367,40 @@ installed addons will be checked for available updates algunos complementos podrían haber sido actualizados - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Error al descargar datos de {} -- código de respuesta recibido {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Administrador de complementos - + Manage external workbenches, macros, and preference packs Administrar entornos de trabajo externos, macros y paquetes de preferencias @@ -2437,7 +2437,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Gestor de complementos diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm index 1473ed81ee..6259b77e2f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 890a8188e7..baa21adb8f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikonoa - + <b>Package Name</b> <b>Pakete-izena</b> - + Version Bertsioa - + Description Deskribapena - + Update Available Eguneraketa eskuragarri @@ -258,61 +258,6 @@ Gehigarrien kudeatzaileak automatikoki instalatu ditzan nahi al duzu? Aukeratu & Addon Manager Gehigarrien kudeatzailea - - - Downloading info... - Informazioa deskargatzen... - - - - Stop the cache update - Gelditu cachearen eguneratzea - - - - Refresh local cache - Freskatu cache lokala - - - - Download and apply all available updates - Deskargatu eta aplikatu erabilgarri dauden eguneraketa guztiak - - - - Update all Addons - Eguneratu gehigarri guztiak - - - - Check for updates - Begiratu eguneraketak dauden - - - - View and update Python package dependencies - Bistaratu eta eguneratu Python paketeen mendekotasunak - - - - Python dependencies... - Python mendekotasunak... - - - - Developer tools... - Garatzaile-tresnak... - - - - Close the Addon Manager - Itxi gehigarren kudeatzailea - - - - Close - Itxi - Edit Tags @@ -599,76 +544,91 @@ denean gehigarrien eguneraketarik dagoen begiratuko da + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Ezkutatu Python 2 bertsiorako soilik diren gehigarriak - + Hide Addons marked Obsolete Ezkutatu zaharkituta dauden gehigarriak - + Hide Addons that require a newer version of FreeCAD Ezkutatu FreeCADen bertsio berriagoa behar duten gehigarriak - + Custom repositories Biltegi pertsonalizatuak - + Proxy Proxya - + No proxy Proxyrik ez - + User system proxy Erabili sistemaren proxya - + User-defined proxy: Erabilitzaileak definitutako proxya: - + Path to git executable (optional): Python exekutagarriaren bide-izena (aukerakoa): - + The path to the git executable. Autodetected if needed and not specified. git exekutagarriaren bide-izena. Automatikoki detektatuko da ezer zehazten ez bada. - + Advanced Options Aukera aurreratuak - + Show option to change branches (requires git) Erakutsi adarrez aldatzeko aukerak (git behar du) - + Disable git (fall back to ZIP downloads only) Desgaitu git (erabili ZIP deskargak soilik) - + Activate Addon Manager options intended for developers of new Addons. Aktibatu gehigarri berriak garatzen dituztenentzako gehigarri-kudeatzailearen aukerak. - + Addon developer mode Gehigarrien garatzaileen modua @@ -1141,17 +1101,17 @@ denean gehigarrien eguneraketarik dagoen begiratuko da AddonsInstaller - + Starting up... Abiarazten... - + Loading addon information Gehigarriaren informazioa kargatzen - + Worker process {} is taking a long time to stop... {} langile-prozesuari kostatzen ari zaio gelditzea... @@ -1170,84 +1130,115 @@ denean gehigarrien eguneraketarik dagoen begiratuko da - + Addon manager Gehigarrien kudeatzailea - + You must restart FreeCAD for changes to take effect. FreeCAD berrabiarazi behar da aldaketak indarrean sartu daitezen. - + Restart now Berrabiarazi orain - + Restart later Berrabiarazi geroago - - + + Refresh local cache Freskatu cache lokala - + Updating cache... Cachea eguneratzen... - + Could not find addon '{}' to select Ez da aurkitu '{}' gehigarria hautatzeko - - + + Checking for updates... Eguneraketak bilatzen... - - Apply {} update(s) - Aplikatu {} eguneraketa + + + Close + Itxi - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Ez dago eguneraketarik eskuragarri - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Ezin da instalatzaile berria abiarazi aurrekoa amaitu baino lehen. - + Execution of macro failed. See console for failure details. Makroaren exekuzioak huts egin du. Begiratu kontsola xehetasun gehiagorako. - - + + Maintainer Mantentzailea - - + + Author Egilea @@ -1268,7 +1259,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da - + Update Eguneratu @@ -1283,27 +1274,27 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Ezin da QtNetwork inportatu -- ez dirudi zure sisteman instalatuta dagoenik. Agian zure hornitzaileak pakete bat dauka mendekotasun horretarako (sarritan "python3-pyside2.qtnetwork" deitzen da) - + Failed to convert the specified proxy port '{}' to a port number Zehaztutako '{}' proxy-ataka ezin izan da ataka-zenbaki bihurtu - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parametro-errorea: elkar ukatzen duten proxy-aukerak ezarri dira. Balio lehenetsiak ezarriko dira. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parametro-errorea: erabiltzaile-proxya adierazi da, baina ez da proxyrik eman. Balio lehenetsiak ezarriko dira. - + Addon Manager: Unexpected {} response from server Gehigarrien kudeatzailea: espero ez zen {} erantzuna zerbitzaritik - + Error with encrypted connection Errorea zifratutako konexioan @@ -1344,162 +1335,157 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Desinstalazioak huts egin du - + Version {version} installed on {date} {version} bertsioa instalatu da {date} egunean - + Version {version} installed {version} bertsioa instalatu da - + Installed on {date} Instalazio-data: {date} - - - - + + + + Installed Instalatuta - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - {} adarrean, eguneratu bertsio erabilgarria - - - - Update available to version - Eskuragarri honako bertsioaren eguneraketa: - - - - An update is available - Eguneraketa bat eskuragarri dago - - - + Git tag '{}' checked out, no updates possible '{}' git etiketa egiaztatu da, ezin da eguneratu - - This is the latest version available for branch {} - Hau da eskuragarri dagoen azken bertsioa {} adarrerako - - - - Updated, please restart FreeCAD to use - Eguneratuta, berrabiarazi FreeCAD bertsio berria erabiltzeko - - - + Update check in progress Eguneratzearen egiaztatzea abian - - Automatic update checks disabled - Eguneratze automatikoen egiaztatzeak desgaituta - - - + Installation location Instalazioaren kokapena - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Desgaituta + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete ABISUA: Gehigarri hau zaharkituta dago - - WARNING: This addon is Python 2 Only - ABISUA: Gehigarri hau Python 2 bertsiokoa da + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - ABISUA: Gehigarri honek honakoa behar du: FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ABISUA: Gehigarri hau instalatuta dago, baina desgaituta dago. Erabili 'gaitu' botoia berriro gaitzeko. - + This Addon will be enabled next time you restart FreeCAD. Gehigarri hau FreeCAD berrabiarazten den hurrengoan gaituko da. - + This Addon will be disabled next time you restart FreeCAD. Gehigarri hau FreeCAD berrabiarazten den hurrengoan desgaituko da. - + Success Eginda - + Branch change succeeded, please restart to use the new version. Adar-aldaketa ongi gauzatu da, berrabiarazi bertsio berria erabiltzeko. - - Changed to git ref '{}' -- please restart to use Addon. - '{}' git ref-ra aldatu da -- mesedez berrabiarazi gehigarria erabiltzeko. - - - + Install Instalatu - + Uninstall Desinstalatu - - Check for Update - Begiratu eguneraketarik dagoen - - - - Run Macro - Exekutatu makroa - - - - Change Branch - Aldatu adarra - - - + Enable Gaitu - + Disable Desgaitu - + + Check for update + Check for update + + + + Run + distantzia + + + + Change branch... + Change branch... + + + Return to package list Itzuli pakete-zerrendara @@ -1577,9 +1563,9 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Hautatu ikono-fitxategi bat eduki-elementu honetarako + - {} is not a subdirectory of {} {} ez da {} direktorioaren azpidirektorio bat @@ -1595,6 +1581,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da + Workbench Lan-mahaia @@ -1779,19 +1766,19 @@ denean gehigarrien eguneraketarik dagoen begiratuko da - + A macro installed with the FreeCAD Addon Manager FreeCADen gehigarri-kudeatzailearekin instalatutako makroa - + Run Indicates a macro that can be 'run' distantzia - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Ezin dira datuak GitHub-etik irakurri: egiaztatu zure interneteko konexioa eta proxy-ezarpenak eta saiatu berriro. @@ -1900,140 +1887,138 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Hautatu ikono-fitxategi bat pakete honetarako - + Filter is valid Iragazkia baliozkoa da - + Filter regular expression is invalid Iragazkiaren adierazpen erregularra baliogabea da - + + Search... + Bilatu... + + + Click for details about package {} Egin klik {} paketearen xehetasunak eskuratzeko - + Click for details about workbench {} Egin klik {} lan-mahaiaren xehetasunak eskuratzeko - + Click for details about macro {} Egin klik {} makroaren xehetasunak eskuratzeko - + Maintainers: Mantentzaileak: - + Tags Etiketak - + updated eguneratuta - - + + Up-to-date Eguneratuta - - - + + + + + Update available Eguneraketa eskuragarri + - Pending restart Berrabioaren zain - - + + DISABLED DESGAITUTA - + Installed version Instalatutako bertsioa - + Unknown version Bertsio ezezaguna - + Installed on Hemen instalatua: - + Available version Bertsio eskuragarria - - Show Addons containing: - Erakutsi honakoa duten gehigarriak: + + Filter by... + Filter by... - - All - Dena + + Addon Type + Addon Type - - Workbenches - Lan-mahaiak - - - - Macros - Makroak - - - - Preference Packs - Hobespen-paketeak - - - - Status: - Egoera: - - - + + Any Edozein - + + Macro + Makroa + + + + Preference Pack + Hobespen-paketea + + + + Installation Status + Installation Status + + + Not installed Instalatu gabea - + Filter Iragazkia - - - OK - Ados - DANGER: Developer feature @@ -2093,83 +2078,83 @@ denean gehigarrien eguneraketarik dagoen begiratuko da {} gehigarriaren instalazioak huts egin du - + Downloaded package.xml for {} {} gehigarriaren package.xml fitxategia deskargatu da - + Failed to decode {} file for Addon '{}' Huts egin du '{}' gehigarrirako {} fitxategia deskodetzeak - + Any dependency information in this file will be ignored Fitxategi honek duen mendekotasun-informazioari ez ikusiarena egingo zaio - + Downloaded metadata.txt for {} {} gehigarriaren metadata.txt deskargatu da - + Downloaded requirements.txt for {} {} gehigarriaren requirements.txt deskargatu da - + Downloaded icon for {} {}-rako ikonoa deskargatu da - + Unable to open macro wiki page at {} Ezin da ireki makroaren {} wiki-orria - + Unable to fetch the code of this macro. Ezin izan da makro honen kodea eskuratu. - + Unable to retrieve a description from the wiki for macro {} Ezin izan da {} makroaren deskribapen bat eskuratu wikitik - + Unable to open macro code URL {} Ezin da ireki makro-kodearen URLa {} - + Unable to fetch macro-specified file {} from {} Ezin da makro bidez zehaztutako {} fitxategia atzitu {} gunetik - + Could not locate macro-specified file {} (expected at {}) Ezin da makroak zehaztutako {} fitxategia aurkitu ({} kokalekuan espero zen) - + {}: Unrecognized internal workbench '{}' {}: Ezagutzen ez den barneko lan-mahaia '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Gehigarrien garatzaileen abisua: {} ({}) gehigarrirako package.xml fitxategian ezarri den biltegi URLa ez dator bat gehigarria atzitu zeneko URLarekin ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Gehigarrien garatzaileen abisua: {} ({}) gehigarrirako package.xml fitxategian ezarri den biltegi-adarra ez dator bat gehigarria atzitu zeneko adarrarekin ({}) - - + + Got an error when trying to import {} Errorea gertatu da {} inportatzen saiatzean @@ -2312,17 +2297,17 @@ denean gehigarrien eguneraketarik dagoen begiratuko da Huts egin du {} makroaren prozesua hiltzeak. - + Retrieving macro description... Makroen deskribapena atzitzen... - + Retrieving info from git Informazioa atzitzen git biltegitik - + Retrieving info from wiki Informazioa atzitzen wikitik @@ -2384,25 +2369,40 @@ denean gehigarrien eguneraketarik dagoen begiratuko da zenbait gehigarri eguneratu ahal izan dira - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Gehigarrien kudeatzailea - + Manage external workbenches, macros, and preference packs Kudeatu kanpoko lan-mahaiak, makroak eta hobespen-paketeak @@ -2439,7 +2439,7 @@ denean gehigarrien eguneraketarik dagoen begiratuko da QObject - + Addon Manager Gehigarrien kudeatzailea diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm index c2ec0886b2..d2b3a6e2fe 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index 407f3f5c6b..9f91ed7e54 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -22,31 +22,31 @@ CompactView - + Icon kuvake - + <b>Package Name</b> <b>Paketin nimi</b> - + Version Versio - + Description Kuvaus - + Update Available Päivitys saatavilla @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Lisäosien hallinta - - - Downloading info... - Ladataan tietoja... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Refresh local cache - - - - Download and apply all available updates - Lataa ja käytä kaikkia saatavilla olevia päivityksiä - - - - Update all Addons - Päivitä kaikki lisäosat - - - - Check for updates - Tarkista päivitykset - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python-riippuvuudet... - - - - Developer tools... - Kehittäjätyökalut... - - - - Close the Addon Manager - Sulje lisäosien hallinta - - - - Close - Sulje - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy Ei välityspalvelinta - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Polku git-suoritustiedostoon (valinnainen): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Lisäasetukset - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Refresh local cache - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Sulje - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Ylläpitäjä - - + + Author Kehittäjä @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Päivitä @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Asenna - + Uninstall Poista asennus - - Check for Update - Check for Update - - - - Run Macro - Suorita makro - - - - Change Branch - Vaihda haaraa - - - + Enable Käytä - + Disable Ota pois käytöstä - + + Check for update + Check for update + + + + Run + Suorita + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Työpöytä @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Suorita - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Etsi... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Tags - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Asennettu versio - + Unknown version Unknown version - + Installed on Installed on - + Available version Saatavilla oleva versio - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Kaikki + + Addon Type + Addon Type - - Workbenches - Työpöydät - - - - Macros - Makrot - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Mikä tahansa - + + Macro + Makro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Suodatin - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Lisäosien hallinta diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm index 9e8282cb0d..df2aac185a 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index ea2a6cb045..01fc4eadb1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icône - + <b>Package Name</b> <b>Nom du paquet</b> - + Version Version - + Description Description - + Update Available Mise à jour disponible @@ -258,61 +258,6 @@ Voulez-vous que le gestionnaire des extensions les installe automatiquement ? Ch Addon Manager Gestionnaire des extensions - - - Downloading info... - Téléchargement des informations... - - - - Stop the cache update - Arrêter la mise à jour du cache - - - - Refresh local cache - Rafraîchir le cache local - - - - Download and apply all available updates - Télécharger et installer toutes les mises à jour disponibles - - - - Update all Addons - Mettre à jour tous les extensions - - - - Check for updates - Vérifier les mises à jour - - - - View and update Python package dependencies - Afficher et mettre à jour les dépendances du paquet Python - - - - Python dependencies... - Dépendances de Python... - - - - Developer tools... - Outils du développeur… - - - - Close the Addon Manager - Fermer le gestionnaire des extensions - - - - Close - Fermer - Edit Tags @@ -563,9 +508,9 @@ Voulez-vous que le gestionnaire des extensions les installe automatiquement ? Ch If this option is selected, when launching the Addon Manager, installed addons will be checked for available updates (this requires the GitPython package installed on your system) - Si cette option est sélectionnée, lors du lancement du gestionnaire des extensions, -les mises à jour disponibles seront vérifiées pour les extensions installées -(cela nécessite l'installation du paquet GitPython sur votre système) + Si cette option est cochée, lors du lancement du gestionnaire des extensions, +les mises à jour disponibles seront vérifiées pour les extensions installées. +Cela nécessite l'installation du paquet GitPython sur votre système. @@ -599,76 +544,91 @@ les mises à jour disponibles seront vérifiées pour les extensions installées + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Masquer les extensions marquées d'une version Python 2 uniquement - + Hide Addons marked Obsolete Masquer les extensions marquées comme obsolètes - + Hide Addons that require a newer version of FreeCAD Masquer les extensions qui nécessitent une version plus récente de FreeCAD - + Custom repositories Dépôts personnalisés - + Proxy Proxy - + No proxy Pas de proxy - + User system proxy Proxy du système de l'utilisateur - + User-defined proxy: Proxy défini par l'utilisateur : - + Path to git executable (optional): Chemin vers l'exécutable git (facultatif) : - + The path to the git executable. Autodetected if needed and not specified. Le chemin vers l'exécutable git. Détecté automatiquement si nécessaire et non spécifié. - + Advanced Options Options avancées - + Show option to change branches (requires git) Afficher l'option pour changer de branche (nécessite git) - + Disable git (fall back to ZIP downloads only) Désactiver git (revenir aux téléchargements ZIP uniquement) - + Activate Addon Manager options intended for developers of new Addons. Activer les options du gestionnaire des extensions destinées aux développeurs des nouvelles extensions. - + Addon developer mode Activer le mode développeur des extensions @@ -960,7 +920,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Change to branch: - Change to branch: + Passer à la branche : @@ -1143,17 +1103,17 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét AddonsInstaller - + Starting up... Démarrage en cours... - + Loading addon information Chargement des informations de l'extension - + Worker process {} is taking a long time to stop... Le processus de traitement {} prend beaucoup de temps pour s’arrêter... @@ -1172,84 +1132,115 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét - + Addon manager Gestionnaire des extensions - + You must restart FreeCAD for changes to take effect. Vous devez redémarrer FreeCAD pour que les modifications soient prises en compte. - + Restart now Redémarrer maintenant - + Restart later Redémarrer plus tard - - + + Refresh local cache Rafraîchir le cache local - + Updating cache... Mise à jour du cache... - + Could not find addon '{}' to select Impossible de trouver l'extension '{}' à sélectionner - - + + Checking for updates... Recherche de mises à jour... - - Apply {} update(s) - Appliquer {} mise(s) à jour + + + Close + Fermer - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Aucune mise à jour disponible - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Impossible de lancer un nouveau programme d'installation tant que le précédent n'est pas terminé. - + Execution of macro failed. See console for failure details. L'exécution de la macro a échoué. Voir la console pour les détails de l'échec. - - + + Maintainer Mainteneur - - + + Author Auteur @@ -1270,7 +1261,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét - + Update Mettre à jour @@ -1285,27 +1276,27 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Impossible d'importer QtNetwork : il ne semble pas être installé sur votre système. Votre fournisseur peut avoir un paquet pour cette dépendance (souvent appelé par exemple "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Échec de la conversion du port du proxy spécifié '{}' en un numéro de port - + Parameter error: mutually exclusive proxy options set. Resetting to default. Erreur de paramètre : des options de proxy mutuellement exclusives ont été définies. Réinitialisation à la valeur par défaut. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Erreur de paramètre : le proxy de l'utilisateur est indiqué, mais aucun proxy n'est fourni. Réinitialisation à la valeur par défaut. - + Addon Manager: Unexpected {} response from server Gestionnaire des extensions : réponse inattendue {} du serveur - + Error with encrypted connection Erreur avec la connexion chiffrée @@ -1346,162 +1337,157 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Échec de la désinstallation - + Version {version} installed on {date} Version {version} installée le {date} - + Version {version} installed Version installée {version} - + Installed on {date} Installé le {date} - - - - + + + + Installed Installé - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Pour le moment sur la branche {}, le nom a été changé à {} - - On branch {}, update available to version - Sur la branche {}, mise à jour disponible vers la version - - - - Update available to version - Mise à jour disponible vers la version - - - - An update is available - Une mise à jour est disponible - - - + Git tag '{}' checked out, no updates possible La balise Git '{}' a été retirée, aucune mise à jour possible - - This is the latest version available for branch {} - Ceci est la dernière version disponible pour la branche {} - - - - Updated, please restart FreeCAD to use - Mis à jour, veuillez redémarrer FreeCAD pour l’utiliser - - - + Update check in progress Recherche de mise à jour en cours - - Automatic update checks disabled - Vérification automatique des mises à jour désactivée - - - + Installation location Emplacement de l’installation - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Désactivé + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete - AVERTISSEMENT : cette extension est obsolète + ATTENTION : cette extension est obsolète. - - WARNING: This addon is Python 2 Only - AVERTISSEMENT : cette extension ne fonctionne qu'avec Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - AVERTISSEMENT : cette extension nécessite FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - AVERTISSEMENT : cette extension est actuellement installée, mais désactivée. Utilisez le bouton 'activer' pour la réactiver. + ATTENTION : cette extension est actuellement installée mais désactivée. Utilisez le bouton "Activer" pour la réactiver. - + This Addon will be enabled next time you restart FreeCAD. Cette extension sera activée la prochaine fois que vous redémarrerez FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Cette extension sera désactivée la prochaine fois que vous redémarrerez FreeCAD. - + Success Opération réussie - + Branch change succeeded, please restart to use the new version. Le changement de branche a réussi, veuillez redémarrer pour utiliser la nouvelle version. - - Changed to git ref '{}' -- please restart to use Addon. - Changé pour la référence git '{}' -- veuillez redémarrer pour utiliser l'extension. - - - + Install Installer - + Uninstall Désinstaller - - Check for Update - Vérifier les mises à jour - - - - Run Macro - Lancer la macro - - - - Change Branch - Changer de branche - - - + Enable Activer - + Disable Désactiver - + + Check for update + Check for update + + + + Run + Lancer + + + + Change branch... + Change branch... + + + Return to package list Retourner à la liste des paquets @@ -1560,8 +1546,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Failed to create installation manifest file: - Failed to create installation manifest file: - + Le fichier d'information sur l'installation n'a pas pu être créé : @@ -1579,9 +1564,9 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Sélectionner un fichier d'icône pour cet élément de contenu. + - {} is not a subdirectory of {} {} n'est pas un sous-répertoire de {} @@ -1597,6 +1582,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét + Workbench Atelier @@ -1781,19 +1767,19 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét - + A macro installed with the FreeCAD Addon Manager Une macro installée avec le gestionnaire des extensions de FreeCAD - + Run Indicates a macro that can be 'run' Exécuter - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Impossible de lire les données depuis GitHub : vérifiez votre connexion internet et vos paramètres de proxy et réessayez. @@ -1810,7 +1796,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét WARNING: Path specified in package.xml metadata does not match currently checked-out branch. - AVERTISSEMENT : le chemin spécifié dans les métadonnées du package.xml ne correspond pas à la branche actuellement extraite. + ATTENTION : le chemin spécifié dans les métadonnées du package.xml ne correspond pas à la branche actuellement extraite. @@ -1902,140 +1888,138 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Sélectionner un fichier d'icône pour ce paquet - + Filter is valid Le filtre est valide - + Filter regular expression is invalid L'expression régulière du filtre n'est pas valide - + + Search... + Rechercher... + + + Click for details about package {} Cliquer pour plus de détails sur le paquet {} - + Click for details about workbench {} Cliquer pour plus de détails sur l'atelier {} - + Click for details about macro {} Cliquer pour plus de détails sur la macro {} - + Maintainers: Mainteneurs : - + Tags Mots-clés - + updated mis à jour - - + + Up-to-date À jour - - - + + + + + Update available Mise à jour disponible + - Pending restart En attente de redémarrage - - + + DISABLED DÉSACTIVÉ - + Installed version Version installée - + Unknown version Version inconnue - + Installed on Installé le - + Available version Version disponible - - Show Addons containing: - Afficher les extensions contenant : + + Filter by... + Filter by... - - All - Tout + + Addon Type + Addon Type - - Workbenches - Ateliers - - - - Macros - Macros - - - - Preference Packs - Kits de préférences - - - - Status: - État : - - - + + Any Tous - + + Macro + Macro + + + + Preference Pack + Kit de préférences + + + + Installation Status + Installation Status + + + Not installed Non installé - + Filter Filtre - - - OK - OK - DANGER: Developer feature @@ -2054,25 +2038,25 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? - AVERTISSEMENT : ce dépôt contient des modifications locales non validées. Êtes-vous sûr de vouloir changer de branche (en apportant les modifications avec vous) ? + ATTENTION : ce répertoire contient des modifications locales non validées. Êtes-vous sûr de vouloir changer de branche (en apportant les modifications avec vous) ? Local Table header for local git ref name - Local + Locale Remote tracking Table header for git remote tracking branch name - Remote tracking + Suivi à distance Last Updated Table header for git update date - Last Updated + Dernière mise à jour @@ -2095,83 +2079,83 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét L'installation de l'extension {} a échoué - + Downloaded package.xml for {} Fichier package.xml téléchargé pour {} - + Failed to decode {} file for Addon '{}' Échec du décodage du fichier {} pour l'extension '{}' - + Any dependency information in this file will be ignored Toutes les informations de dépendance dans ce fichier seront ignorées - + Downloaded metadata.txt for {} Fichier metadata.txt téléchargé pour {} - + Downloaded requirements.txt for {} Fichier requirements.txt téléchargé pour {} - + Downloaded icon for {} Icône téléchargée pour {} - + Unable to open macro wiki page at {} Impossible d'ouvrir la page wiki de la macro {} - + Unable to fetch the code of this macro. Impossible de récupérer le code de cette macro. - + Unable to retrieve a description from the wiki for macro {} Impossible de récupérer une description du wiki pour la macro {} - + Unable to open macro code URL {} Impossible d'ouvrir l'URL du code de la macro {} - + Unable to fetch macro-specified file {} from {} Impossible de récupérer le fichier {} spécifié par la macro à partir de {} - + Could not locate macro-specified file {} (expected at {}) Impossible de localiser le fichier {} spécifié par la macro (attendu à {}) - + {}: Unrecognized internal workbench '{}' {} : atelier interne non reconnu '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - Avertissement du développeur de l'extension : l'URL du répertoire défini dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à l'URL depuis laquelle il a été récupéré ({}) + Avertissement du développeur de l'extension : l'URL du répertoire défini dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à l'URL depuis laquelle il a été récupéré ({}). - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - Avertissement du développeur de l'extension : la branche du répertoire définie dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à la branche depuis laquelle il a été récupéré ({}) + Avertissement du développeur de l'extension : la branche du répertoire définie dans le fichier package.xml pour l'extension {} ({}) ne correspond pas à la branche depuis laquelle il a été récupéré ({}). - - + + Got an error when trying to import {} Une erreur s'est produite lors de l'importation de {} @@ -2213,7 +2197,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét WARNING: Duplicate addon {} ignored - ATTENTION : l'extension dupliquée {} est ignorée + ATTENTION : l'extension dupliquée {} est ignorée. @@ -2315,17 +2299,17 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét - + Retrieving macro description... Récupération de la description de la macro... - + Retrieving info from git Récupération des informations depuis git - + Retrieving info from wiki Récupération des informations depuis le wiki @@ -2359,7 +2343,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét Git branch rename failed with the following message: - Git branch rename failed with the following message: + Le renommage de la branche Git a échoué avec le message suivant : @@ -2387,25 +2371,40 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét certaines extensions ont peut-être été mises à jour - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Échec du téléchargement des données de {}. Le code de réponse reçu est {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Gestionnaire des extensions - + Manage external workbenches, macros, and preference packs Gérer les ateliers externes, les macros et les kits de préférences @@ -2442,7 +2441,7 @@ D'autres paquets Python dont dépendent ces paquets peuvent également avoir ét QObject - + Addon Manager Gestionnaire des extensions diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm index 48945591f8..c86a117b74 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index e9fa8cade6..a1953a602b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icona - + <b>Package Name</b> <b>Package Name</b> - + Version Versión - + Description Descrición - + Update Available Update Available @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Xestor de complementos - - - Downloading info... - Descargando información... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Actualiza a caché local - - - - Download and apply all available updates - Descargar e aplicar tódalas actualizacións dispoñibles - - - - Update all Addons - Update all Addons - - - - Check for updates - Check for updates - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Pechar o Xestor de complementos - - - - Close - Pechar - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy Sen proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Advanced Options - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Actualiza a caché local - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Pechar - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Mantedor - - + + Author Autor @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Actualizar @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Instalado - + Uninstall Desinstalar - - Check for Update - Check for Update - - - - Run Macro - Executar macro - - - - Change Branch - Cambiar Rama - - - + Enable Habilitar - + Disable Inhabilitar - + + Check for update + Check for update + + + + Run + Executar + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Banco de traballo @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Executar - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Atopar... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Etiquetas - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Todo + + Addon Type + Addon Type - - Workbenches - Bancos de traballo - - - - Macros - Macros - - - - Preference Packs - Preference Packs - - - - Status: - Estado: - - - + + Any Calquera - + + Macro + Macro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtro - - - OK - Aceptar - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Xestor de complementos diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm index 708d8730cf..d1f778a45e 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index 237f2d56dd..7ca6f7fa81 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikona - + <b>Package Name</b> <b>Naziv paketa</b> - + Version Verzija - + Description Opis - + Update Available Dostupno je ažuriranje @@ -258,61 +258,6 @@ Da li želite da Upravitelj dodacima ih instalira automatski? Odaberi "Igno Addon Manager Upravitelj dodataka - - - Downloading info... - Preuzimanje informacija... - - - - Stop the cache update - Prekini ažuriranje predmemorije - - - - Refresh local cache - Osvježite lokalnu predmemoriju - - - - Download and apply all available updates - Preuzmite i primijenite sva dostupna ažuriranja - - - - Update all Addons - Ažuriraj sve dodatke - - - - Check for updates - Provjeri ažuriranja - - - - View and update Python package dependencies - Pogledaj i zanovi Python ovisnosti - - - - Python dependencies... - Pythonove ovisnosti ... - - - - Developer tools... - Razvojni alati... - - - - Close the Addon Manager - Zatvori Upravitelja dodataka - - - - Close - Zatvori - Edit Tags @@ -601,76 +546,91 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Skriva dodatak označen samo za Python 2 - + Hide Addons marked Obsolete Skriva dodatake označene zastarjelim - + Hide Addons that require a newer version of FreeCAD Sakrij dodatke koji zahtjevaju noviju verziju FreeCAD-a - + Custom repositories Prilagođena spremišta - + Proxy Proxy - + No proxy No proxy - + User system proxy User system proxy - + User-defined proxy: Korisnički definiran proxy: - + Path to git executable (optional): Putanja ka izvršnoj git datoteci (neobavezno): - + The path to the git executable. Autodetected if needed and not specified. Putanja ka izvršnoj git datoteci. Automatski detektirano ako je potrebno i nije specificirano. - + Advanced Options Napredne opcije - + Show option to change branches (requires git) Prikaži opciju za promjenu grana (zahtjeva git) - + Disable git (fall back to ZIP downloads only) Onemogući git (povratak na ZIP preuzimanja) - + Activate Addon Manager options intended for developers of new Addons. Aktivirajte Upravitelj dodataka opcije namijenjene programerima novih Dodataka. - + Addon developer mode Dodatak Developer mod @@ -1145,17 +1105,17 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja AddonsInstaller - + Starting up... Pokreče se... - + Loading addon information Učitavanje informacija o dodatku - + Worker process {} is taking a long time to stop... Radni proces {} se dugo zaustavlja... @@ -1174,84 +1134,115 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja - + Addon manager Upravitelj dodataka - + You must restart FreeCAD for changes to take effect. Za primjenu promjene, ponovo pokreni FreeCAD. - + Restart now Ponovno pokreni sada - + Restart later Ponovno pokreni kasnije - - + + Refresh local cache Osvježite lokalnu predmemoriju - + Updating cache... Ažuriram međuspremnik… - + Could not find addon '{}' to select Nije moguće pronaći Dodatak '{}' da bi se izabrao - - + + Checking for updates... Provjeri ima li ažuriranja... - - Apply {} update(s) - Primjeni {} ažuriranje(a) + + + Close + Zatvori - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Nema dostupnih ažuriranja - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Ne može se pokrenuti novi program za instaliranje dok se prethodni ne završi. - + Execution of macro failed. See console for failure details. Izvršavanje makro naredbe nije uspjelo. Pogledaj konzolu za detalje o greškama. - - + + Maintainer Održavatelj - - + + Author Autor @@ -1272,7 +1263,7 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja - + Update Ažuriraj @@ -1287,27 +1278,27 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Nije moguće uvesti QtNetwork -- izgleda da nije instaliran na tvom operativnom sustavu. Tvoj davatelj usluga možda ima paket za ovu zavisnost (često se na primjer naziva, "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Konvertiranje navedenog proksi porta '{}' nije uspjelo - + Parameter error: mutually exclusive proxy options set. Resetting to default. Greška u parametru: postavljene su međusobno isključive proksi opcije. Vraćanje na zadane vrijednosti. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Greška u parametru: korisnički proksi je označen, ali nije moguće. Vraćanje na zadane vrijednosti. - + Addon Manager: Unexpected {} response from server Upravitelj dodataka: Neočekivani {} odgovor s poslužitelja - + Error with encrypted connection Pogreška s šifriranom vezom @@ -1348,162 +1339,157 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Deinstaliranje nije uspjelo - + Version {version} installed on {date} Dana {date} instalirana je verzija {version} - + Version {version} installed Instalirana {version} verzija - + Installed on {date} Instalirano {date} - - - - + + + + Installed Instalirano - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - Na grani {}, dostupno ažuriranje na verziju - - - - Update available to version - Dostupno ažuriranje za verziju - - - - An update is available - Ažuriranje je dostupno - - - + Git tag '{}' checked out, no updates possible Oznaka Git-a '{}' provjerena, ažuriranja nisu moguća - - This is the latest version available for branch {} - Ovo je najnovija verzija dostupna za granu {} - - - - Updated, please restart FreeCAD to use - Ažurirano, ponovno pokrenite FreeCAD za korištenje - - - + Update check in progress Provjera ažuriranja u tijeku - - Automatic update checks disabled - Provjera automatskog ažuriranja isključena - - - + Installation location Mjesto instaliranja - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Onemogućeno + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete UPOZORENJE: Ovaj dodatak je zastario - - WARNING: This addon is Python 2 Only - UPOZORENJE: Ovaj dodatak je samo za Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - UPOZORENJE: Ovaj dodatak treba FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. UPOZORENJE: Ovaj dodatak je trenutno instaliran, ali je onemogućen. Koristi 'omogući' gumb da bi ponovo omogućio. - + This Addon will be enabled next time you restart FreeCAD. Ovaj Dodatak će biti omogućen sljedeći put kada ponovo pokreneš FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Ovaj Dodatak će biti onemogućen sljedeći put kada ponovo pokreneš FreeCAD. - + Success Uspješno obavljeno - + Branch change succeeded, please restart to use the new version. Promjena grane je uspela, ponovo pokreni da bi koristio novu verziju. - - Changed to git ref '{}' -- please restart to use Addon. - Promjenjeno u git ref '{}' -- ponovo pokreni da bi koristio Dodatak. - - - + Install Instaliraj - + Uninstall Deinstaliraj - - Check for Update - Provjeri ažuriranja - - - - Run Macro - Izvedi makronaredbu - - - - Change Branch - Promijeni granu - - - + Enable Omogući - + Disable Onemogući - + + Check for update + Check for update + + + + Run + pokreni + + + + Change branch... + Change branch... + + + Return to package list Povratak na popis paketa @@ -1581,9 +1567,9 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Izaberi datoteku ikone za ovu stavku sadržaja + - {} is not a subdirectory of {} {} nije poddirektorij {} @@ -1599,6 +1585,7 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja + Workbench Radni prostor @@ -1783,19 +1770,19 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja - + A macro installed with the FreeCAD Addon Manager Makro naredba instalirana sa FreeCAD Upraviteljem dodataka - + Run Indicates a macro that can be 'run' pokreni - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Nije moguće pročitati podatke sa GitHub-a: provjeri internet vezu i podešavanja proksija i pokušaj ponovo. @@ -1904,142 +1891,140 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Izaberi datoteku ikone za ovaj paket - + Filter is valid Filter je valjan - + Filter regular expression is invalid Regularni izraz filtra nije važeći - + + Search... + Pretraživanje... + + + Click for details about package {} Kliknite za detalje o paketu {} - + Click for details about workbench {} Kliknite za detalje o Radnom stolu {} - + Click for details about macro {} Kliknite za detalje o makro naredbama {} - + Maintainers: Održavatelji: - + Tags Oznake - + updated ažurirano - - + + Up-to-date Aktualno - - - + + + + + Update available Dostupno ažuriranje + - Pending restart Na čekanju ponovnog pokretanja - - + + DISABLED ONEMOGUĆENO - + Installed version Instalirana verzija - + Unknown version Nepoznata verzija - + Installed on Instalirano na - + Available version Dostupna verzija - - Show Addons containing: - Prikaži dodatke koji sadrže: + + Filter by... + Filter by... - - All - Sve + + Addon Type + Addon Type - - Workbenches - Radne površine - - - - Macros - Makronaredbe - - - - Preference Packs - Preference Packs - - - - Status: - Stanje: - - - + + Any Bilo koji - + + Macro + Makro naredbe + + + + Preference Pack + Paket postavki + + + + Installation Status + Installation Status + + + Not installed Nije instalirano - + Filter Filter - - - OK - U redu - DANGER: Developer feature @@ -2099,83 +2084,83 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Instalacija Dodatka {} nije uspjela. - + Downloaded package.xml for {} Preuzet package.xml za {} - + Failed to decode {} file for Addon '{}' Dekodiranje {} datoteke za Dodatak '{}' nije uspjelo - + Any dependency information in this file will be ignored Sve informacije o zavisnosti u ovoj datoteci će biti ignorirane - + Downloaded metadata.txt for {} Preuzet metadata.txt za {} - + Downloaded requirements.txt for {} Preuzet requirements.txt za {} - + Downloaded icon for {} Preuzeta ikona za {} - + Unable to open macro wiki page at {} Nije moguće otvoriti makro wiki stranicu na {} - + Unable to fetch the code of this macro. Nije moguće preuzeti kod ove makro naredbe. - + Unable to retrieve a description from the wiki for macro {} Nije moguće preuzeti opis sa wiki-ja za makro naredbu {} - + Unable to open macro code URL {} Nije moguće otvoriti makro kod URL {} - + Unable to fetch macro-specified file {} from {} Nije moguće preuzeti datoteku {} navedene makro naredbe iz {} - + Could not locate macro-specified file {} (expected at {}) Nije moguće locirati datoteku navedenu u makro naredbi {} (trebala je biti u {}) - + {}: Unrecognized internal workbench '{}' {}: Neprepoznati interni Radni stol '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Upozorenje za programere Dodatka: URL adresa spremišta zadana u package.xml datoteci za dodatak {} ({}) ne odgovara URL adresi sa koje je preuzet ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Upozorenje za programere Dodatka: Grana-adresa spremišta zadana u package.xml datoteci za dodatak {} ({}) ne odgovara Grana-adresi sa koje je preuzet ({}) - - + + Got an error when trying to import {} Greška pri pokušaju uvoza {} @@ -2317,17 +2302,17 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja Zaustavljanje procesa za makro naredbu {} nije uspjelo - + Retrieving macro description... Dohvaćanje opisa makro naredbe... - + Retrieving info from git Dohvaćanje informacije od git - + Retrieving info from wiki Dohvaćanje informacije od wiki-a @@ -2389,25 +2374,40 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja neki dodaci su možda ažurirani - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager Upr&avitelj dodataka - + Manage external workbenches, macros, and preference packs Upravljajte vanjskim radnim stolovima, makronaredbama i paketima postavki @@ -2444,7 +2444,7 @@ instalirani dodaci će se provjeriti na dostupna ažuriranja QObject - + Addon Manager Upravitelj dodataka diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm index 917244beb4..7803ce47ef 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index c9886c5cc8..24cbf471e8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikon - + <b>Package Name</b> <b>Csomag neve</b> - + Version Verzió - + Description Leírás - + Update Available Frissítés elérhető @@ -258,61 +258,6 @@ A bővítmény kezelő automatikusan telepítse őket? Válassza a "Elvet&q Addon Manager Bővítmény kezelő - - - Downloading info... - Letöltési infó... - - - - Stop the cache update - A gyorsítótár frissítésének leállítása - - - - Refresh local cache - Gyorsítótár frissítése - - - - Download and apply all available updates - Az összes elérhető frissítés letöltése és alkalmazása - - - - Update all Addons - Összes bővítmény frissítése - - - - Check for updates - Frissítések keresése - - - - View and update Python package dependencies - Python csomagfüggőségek megtekintése és frissítése - - - - Python dependencies... - Python függőségek... - - - - Developer tools... - Fejlesztői eszközök... - - - - Close the Addon Manager - Bővítmény kezelőjének bezárása - - - - Close - Bezárás - Edit Tags @@ -599,76 +544,91 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Csak Python v. 2 bővítmények elrejtése - + Hide Addons marked Obsolete Az elavultként megjelölt bővítmények elrejtése - + Hide Addons that require a newer version of FreeCAD A FreeCAD újabb verzióját igénylő bővítmények elrejtése - + Custom repositories Egyéni adattárak - + Proxy Proxy - + No proxy Nincs proxy - + User system proxy Felhasználói rendszer proxy - + User-defined proxy: Felhasználó által meghatározott proxy: - + Path to git executable (optional): Git végrehajtható fájl elérés (választható): - + The path to the git executable. Autodetected if needed and not specified. A git végrehajtható fájl elérési útja. Szükség esetén automatikusan észlelve, és nincs megadva. - + Advanced Options Haladó beállítások - + Show option to change branches (requires git) A változat módosításának lehetősége (git szükséges) - + Disable git (fall back to ZIP downloads only) A git letiltása (csak ZIP-letöltésekre való visszalépés) - + Activate Addon Manager options intended for developers of new Addons. Aktiválja az új Bővítmény kezelőkhöz a fejlesztőknek szánt Bítmény kezelő lehetőségeket. - + Addon developer mode Bővítmény fejlesztői mód @@ -958,7 +918,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Change to branch: - Change to branch: + Váltson a változatra: @@ -1141,17 +1101,17 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre AddonsInstaller - + Starting up... Elkezd... - + Loading addon information Bővítményadatok betöltése - + Worker process {} is taking a long time to stop... Hosszú időbe telik egy futó {} folyamat leállítása... @@ -1170,84 +1130,115 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre - + Addon manager Bővítmény kezelő - + You must restart FreeCAD for changes to take effect. A módosítások érvénybe léptetéséhez újra kell indítania a FreeCAD-et. - + Restart now Újraindítás most - + Restart later Újraindítás később - - + + Refresh local cache Gyorsítótár frissítése - + Updating cache... Gyorsítótár frissítése... - + Could not find addon '{}' to select Nem található a kijelölni kívánt '{}' bővítmény - - + + Checking for updates... Frissítés keresése... - - Apply {} update(s) - {} frissítés(ek) alkalmazása + + + Close + Bezárás - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Nincs elérhető frissítés - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Az új telepítő csak az előző telepítő befejezése után indítható el. - + Execution of macro failed. See console for failure details. A makró végrehajtása sikertelen. A hiba részleteit lásd a konzolon. - - + + Maintainer Közreműködő - - + + Author Létrehozó @@ -1268,7 +1259,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre - + Update Frissítés @@ -1283,27 +1274,27 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Nem lehet importálni a QtNetwork-et - nincs telepítve a rendszerre. Előfordulhat, hogy a szolgáltatónak van egy csomagja ehhez a függőséghez (gyakran így nevezik "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Nem sikerült a megadott '{}' proxy portot a port számra átalakítani - + Parameter error: mutually exclusive proxy options set. Resetting to default. Paraméter hiba: kölcsönösen kizáró proxy beállítások. Alapértelmezettre visszaállítás. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Paraméterhiba: felhasználói proxy van megadva, de nincs megadva proxy. Alapértelmezettre visszaállítás. - + Addon Manager: Unexpected {} response from server Bővítmény kezelő: Váratlan {} válasz a szervertől - + Error with encrypted connection Hiba a titkosított kapcsolat során @@ -1344,162 +1335,157 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Sikertelen eltávolítás - + Version {version} installed on {date} {version} telepítve ekkor {date} - + Version {version} installed {version} verzió telepítve - + Installed on {date} Telepítés ideje {date} - - - - + + + + Installed Telepítve - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Jelenleg a {} változat van, neve {}-ra változott - - On branch {}, update available to version - A {} változaton elérhető frissítés a következő verzióra - - - - Update available to version - Rendelkezésre áll verzió frissítés - - - - An update is available - Egy frissítés elérhető - - - + Git tag '{}' checked out, no updates possible Git mező '{}' ellenőrizve, frissítés nem lehetséges - - This is the latest version available for branch {} - Ez a legfrissebb elérhető verzió erre a változatra: {} - - - - Updated, please restart FreeCAD to use - Frissítve, indítsa újra a FreeCAD-et - - - + Update check in progress Frissítések ellenőrzése folyamatban - - Automatic update checks disabled - Automatikus frissítés ellenőrzés letiltva - - - + Installation location Telepítés helye - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Kikapcsolva + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete FIGYELMEZTETÉS: Ez a bővítmény elavult - - WARNING: This addon is Python 2 Only - FIGYELMEZTETÉS: Ez a bővítmény csak Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - FIGYELEM: Ehhez a bővítményhez FreeCAD szükséges + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. FIGYELMEZTETÉS: Ez a bővítmény jelenleg telepített, de le van tiltva. Használja az 'engedélyezés' gombot a visszakapcsolásához. - + This Addon will be enabled next time you restart FreeCAD. Ez a bővítmény a FreeCAD következő újraindításakor lesz engedélyezve. - + This Addon will be disabled next time you restart FreeCAD. Ez a bővítmény a FreeCAD következő újraindításakor lesz kiiktatva. - + Success Sikerült - + Branch change succeeded, please restart to use the new version. A változatváltás sikeres volt, indítsa újra az új verzió használatához. - - Changed to git ref '{}' -- please restart to use Addon. - Módosított git hivatkozás '{}' -- indítsa újra a bővítmény használatához. - - - + Install Teleptés - + Uninstall Eltávolítás - - Check for Update - Frissítések keresése - - - - Run Macro - Makró futtatás - - - - Change Branch - Változat módosítása - - - + Enable Bekapcsolás - + Disable Letilt - + + Check for update + Check for update + + + + Run + Futtat + + + + Change branch... + Change branch... + + + Return to package list Vissza a csomag listához @@ -1558,7 +1544,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Failed to create installation manifest file: - Failed to create installation manifest file: + Nem sikerült létrehozni a telepítési manifeszt fájlt: @@ -1577,9 +1563,9 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Válasszon ki egy ikonfájlt ehhez a tartalmi elemhez + - {} is not a subdirectory of {} {} nem alkönyvtára ennek: {} @@ -1595,6 +1581,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre + Workbench Munkafelület @@ -1779,19 +1766,19 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre - + A macro installed with the FreeCAD Addon Manager A FreeCAD bővítmény kezelővel telepített makró - + Run Indicates a macro that can be 'run' Futtat - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Nem sikerült adatokat olvasni a GitHubról: ellenőrizze az internetkapcsolat és a proxy beállításait, és próbálja meg újra. @@ -1900,140 +1887,138 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Válasszon ki egy ikonfájlt ehhez a csomaghoz - + Filter is valid A szűrő érvényes - + Filter regular expression is invalid A szűrő alapértelmezett kifejezése érvénytelen - + + Search... + Keres... + + + Click for details about package {} Kattintson a csomag részleteiért {} - + Click for details about workbench {} Kattintson a munkafelület részleteiért {} - + Click for details about macro {} Kattintson a makró részleteiért {} - + Maintainers: Közreműködők: - + Tags Címkék - + updated frissítve - - + + Up-to-date Naprakész - - - + + + + + Update available Frissítés elérhető + - Pending restart Újraindításra vár - - + + DISABLED LETILTVA - + Installed version Telepített verzió - + Unknown version Ismeretlen verzió - + Installed on Telepítve ekkor - + Available version Elérhető verzió - - Show Addons containing: - A következőt tartalmazó bővítmények megjelenítése: + + Filter by... + Filter by... - - All - Minden + + Addon Type + Addon Type - - Workbenches - Munkafelületek - - - - Macros - Makrók - - - - Preference Packs - Előnyben részesített csomagok - - - - Status: - Állapot: - - - + + Any Bármelyik - + + Macro + Makró + + + + Preference Pack + Előnyben részesített csomag + + + + Installation Status + Installation Status + + + Not installed Nincs telepítve - + Filter Szűrő - - - OK - OK - DANGER: Developer feature @@ -2058,13 +2043,13 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre Local Table header for local git ref name - Local + Helyi Remote tracking Table header for git remote tracking branch name - Remote tracking + Távoli követés @@ -2093,83 +2078,83 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre A {} bővítmény telepítése sikertelen - + Downloaded package.xml for {} Letöltött package.xml a(z) {} számára - + Failed to decode {} file for Addon '{}' Nem sikerült dekódolni a {} fájlt a '{}' hozzáadásához - + Any dependency information in this file will be ignored Az ebben a fájlban lévő függőségi információkat figyelmen kívül hagyjuk - + Downloaded metadata.txt for {} Letöltött metadata.txt a(z) {} részére - + Downloaded requirements.txt for {} Letöltött requirements.txt a(z) {} részére - + Downloaded icon for {} Letöltött ikon ehhez: {} - + Unable to open macro wiki page at {} A {} makro wiki oldalt nem lehet megnyitni - + Unable to fetch the code of this macro. Nem sikerült beolvasni a makró kódját. - + Unable to retrieve a description from the wiki for macro {} Nem olvasható be a {} makró wiki leírása - + Unable to open macro code URL {} A {} makrókód URL nem nyitható meg - + Unable to fetch macro-specified file {} from {} Nem sikerült lekérni a makró által megadott {} fájlt innen: {} - + Could not locate macro-specified file {} (expected at {}) Nem találta a makró által megadott {} fájlt (a {}-nál kellett volna lennie) - + {}: Unrecognized internal workbench '{}' {}: Nem ismert belső munkafelület '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Bővítmény fejlesztői figyelmeztetés: A bővítmény {} ({}) package.xml fájlban megadott tároló URL címe nem egyezik az URL-címmel, ahonnan lehívásra került ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Bővítmény fejlesztői figyelmeztetés: A package.xml fájlban a {} ({}) bővítmény tárolt változata nem egyezik azzal a változattal, ahonnan lekérdezték ({}) - - + + Got an error when trying to import {} Hibát kapott, amikor megpróbálta importálni a {} @@ -2313,17 +2298,17 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre - + Retrieving macro description... Makró leírásának lekérése... - + Retrieving info from git Információ beolvasása git-ből - + Retrieving info from wiki Információ beolvasása wiki-ből @@ -2385,25 +2370,40 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre egyes bővítmények frissülhettek - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Bővítmény kezelő - + Manage external workbenches, macros, and preference packs Külső munkafelületek, makrók és beállításcsomagok kezelése @@ -2440,7 +2440,7 @@ telepített bővítményeket a rendszer ellenőrzi az elérhető frissítésekre QObject - + Addon Manager Bővítmény kezelő diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm index e0e61d9e38..3dfe780c60 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index 553ee8f515..0c46ddf394 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikon - + <b>Package Name</b> <b>Nama Paket</b> - + Version Versi - + Description Description - + Update Available Pembaruan Tersedia @@ -258,61 +258,6 @@ Apakah Anda ingin Pengelola Addon menginstalnya secara otomatis? Pilih "Aba Addon Manager Pengelola Addon - - - Downloading info... - Mengunduh info... - - - - Stop the cache update - Hentikan pembaruan cache - - - - Refresh local cache - Segarkan cache lokal - - - - Download and apply all available updates - Unduh dan terapkan semua pembaruan yang tersedia - - - - Update all Addons - Perbarui semua Addon - - - - Check for updates - Periksa pembaruan - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Alat pengembang... - - - - Close the Addon Manager - Tutup Pengelola Addon - - - - Close - Dekat - Edit Tags @@ -599,76 +544,91 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Repositori khusus - + Proxy Proxy - + No proxy Tanpa proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Pilihan Lanjutan - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia AddonsInstaller - + Starting up... Memulai... - + Loading addon information Memuat informasi addon - + Worker process {} is taking a long time to stop... Proses bekerja {} membutuhkan waktu lama untuk berhenti... @@ -1170,84 +1130,115 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Segarkan cache lokal - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Dekat - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Pemelihara - - + + Author Penulis @@ -1268,7 +1259,7 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia - + Update Memperbarui @@ -1283,27 +1274,27 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Pemeriksaan pembaruan sedang berlangsung - - Automatic update checks disabled - Pembaruan otomatis dinonaktifkan - - - + Installation location Lokasi pemasangan - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete PERINGATAN: Addon ini sudah usang - - WARNING: This addon is Python 2 Only - PERINGATAN: Addon ini hanya untuk Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - PERINGATAN: Addon ini membutuhkan FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. PERINGATAN: Addon ini sedang dipasang, namun dinonaktifkan. Gunakan tombol 'aktifkan' untuk mengaktifkan kembali. - + This Addon will be enabled next time you restart FreeCAD. Addon ini akan diaktifkan saat Anda memulai ulang FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Addon ini akan dinonaktifkan saat Anda memulai ulang FreeCAD. - + Success Berhasil - + Branch change succeeded, please restart to use the new version. Perubahan cabang berhasil, silakan mulai ulang untuk menggunakan versi baru. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Pasang - + Uninstall Copot pemasangan - - Check for Update - Periksa pembaruan - - - - Run Macro - Jalankan Makro - - - - Change Branch - Ubah cabang - - - + Enable Memungkinkan - + Disable Nonaktifkan - + + Check for update + Check for update + + + + Run + menjalankan + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia + Workbench Meja kerja @@ -1779,19 +1766,19 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' menjalankan - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia Pilih file ikon untuk paket ini - + Filter is valid Filternya valid - + Filter regular expression is invalid Filter ekspresi reguler tidak valid - + + Search... + Search... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Pemelihara: - + Tags Tanda - + updated diperbarui - - + + Up-to-date Mutakhir - - - + + + + + Update available Pembaruan tersedia + - Pending restart Menunggu dimulai ulang - - + + DISABLED DINONAKTIFKAN - + Installed version Versi terpasang - + Unknown version Versi tidak diketahui - + Installed on Installed on - + Available version Versi tersedia - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Semua + + Addon Type + Addon Type - - Workbenches - Workbenches - - - - Macros - Makro - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Apa saja - + + Macro + Makro + + + + Preference Pack + Paket Preferensi + + + + Installation Status + Installation Status + + + Not installed Tidak terpasang - + Filter Menyaring - - - OK - Baik - DANGER: Developer feature @@ -2093,83 +2078,83 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia - + Retrieving macro description... Mengambil deskripsi makro... - + Retrieving info from git Mengambil info dari git - + Retrieving info from wiki Mengambil info dari wiki @@ -2385,25 +2370,40 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia beberapa addon mungkin telah diperbarui - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Pengelola Addon - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ addon yang terinstal akan diperiksa untuk pembaruan yang tersedia QObject - + Addon Manager Pengelola Addon diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm index a6b342f020..41b12832a7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 6a2de5d396..a459228c99 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icona - + <b>Package Name</b> <b>Nome pacchetto</b> - + Version Versione - + Description Descrizione - + Update Available Aggiornamento Disponibile @@ -258,61 +258,6 @@ Vuoi che Addon Manager li installi automaticamente? Scegli "Ignora" pe Addon Manager Addon manager - - - Downloading info... - Download informazioni... - - - - Stop the cache update - Ferma l'aggiornamento della cache - - - - Refresh local cache - Aggiorna cache locale - - - - Download and apply all available updates - Scarica e applica tutti gli aggiornamenti disponibili - - - - Update all Addons - Aggiorna tutte le estensioni - - - - Check for updates - Controlla aggiornamenti - - - - View and update Python package dependencies - Visualizza e aggiorna le dipendenze dei pacchetti Python - - - - Python dependencies... - Dipendenze Python... - - - - Developer tools... - Strumenti di sviluppo... - - - - Close the Addon Manager - Chiude Addon manager - - - - Close - Chiudi - Edit Tags @@ -599,76 +544,91 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Nascondi Addons contrassegnati con Solo Python 2 - + Hide Addons marked Obsolete Nascondi gli Addons contrassegnati obsoleti - + Hide Addons that require a newer version of FreeCAD Nascondi Addons che richiedono una nuova versione di FreeCAD - + Custom repositories Repository personalizzati - + Proxy Proxy - + No proxy No proxy - + User system proxy Proxy di sistema utente - + User-defined proxy: Proxy definito dall'utente: - + Path to git executable (optional): Percorso dell' eseguibile git (opzionale): - + The path to the git executable. Autodetected if needed and not specified. Il percorso del git eseguibile. Rilevato automaticamente se necessario e non specificato. - + Advanced Options Opzioni Avanzate - + Show option to change branches (requires git) Mostra opzione per cambiare i rami (richiede git) - + Disable git (fall back to ZIP downloads only) Disabilita git (torna solo agli scaricamenti ZIP) - + Activate Addon Manager options intended for developers of new Addons. Attiva le opzioni Addon Manager destinate agli sviluppatori di nuovi Addons. - + Addon developer mode Modalità sviluppatore Addon @@ -958,7 +918,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Change to branch: - Change to branch: + Cambia ramo: @@ -1141,17 +1101,17 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili AddonsInstaller - + Starting up... Avvio in corso... - + Loading addon information Caricamento informazioni addon - + Worker process {} is taking a long time to stop... Il processo in corso {} sta impiegando molto tempo per fermarsi... @@ -1170,84 +1130,115 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. È necessario riavviare FreeCAD perché le modifiche abbiano effetto. - + Restart now Riavvia ora - + Restart later Riavvia dopo - - + + Refresh local cache Aggiorna cache locale - + Updating cache... Aggiornamento cache... - + Could not find addon '{}' to select Impossibile trovare l'addon '{}' da selezionare - - + + Checking for updates... Controllo aggiornamenti... - - Apply {} update(s) - Applica {} aggiornamento(i) + + + Close + Chiudi - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Nessun aggiornamento disponibile - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Impossibile avviare una nuova installazione fino al termine della precedente. - + Execution of macro failed. See console for failure details. Esecuzione della macro non riuscita. Consultare la console per i dettagli dell'errore. - - + + Maintainer Manutentore - - + + Author Autore @@ -1268,7 +1259,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili - + Update Aggiorna @@ -1283,27 +1274,27 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Impossibile importare QtNetwork -- non sembra essere installato sul sistema. Il tuo provider può avere un pacchetto per questa dipendenza (spesso chiamata "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Impossibile convertire la porta proxy specificata '{}' in un numero di porta - + Parameter error: mutually exclusive proxy options set. Resetting to default. Errore nel parametro: le opzioni proxy impostate sono reciprocamente esclusive. Ripristinato valore predefinito. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Errore di parametro: proxy utente indicato, ma nessun proxy fornito. Ripristino a default. - + Addon Manager: Unexpected {} response from server Addon Manager: Risposta {} inattesa dal server - + Error with encrypted connection Errore con connessione cifrata @@ -1344,162 +1335,157 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Disinstallazione fallita - + Version {version} installed on {date} Versione {version} installata in {date} - + Version {version} installed Versione {version} installata - + Installed on {date} Installato il {date} - - - - + + + + Installed Installato - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Attualmente sul ramo {}, nome cambiato in {} - - On branch {}, update available to version - Sul ramo {}, aggiornamento disponibile alla versione - - - - Update available to version - Aggiornamento disponibile alla versione - - - - An update is available - Un aggiornamento è disponibile - - - + Git tag '{}' checked out, no updates possible Git tag '{}' check out, nessun aggiornamento possibile - - This is the latest version available for branch {} - Questa è l'ultima versione disponibile per il ramo {} - - - - Updated, please restart FreeCAD to use - Aggiornato, riavviare FreeCAD per usare - - - + Update check in progress Controllo aggiornamento in corso - - Automatic update checks disabled - Controllo automatico degli aggiornamenti disabilitato - - - + Installation location Percorso di installazione - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabilitato + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete ATTENZIONE: Questo addon è obsoleto - - WARNING: This addon is Python 2 Only - ATTENZIONE: Questo addon funziona solo con Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - ATTENZIONE: Questo addon richiede FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ATTENZIONE: Questo addon è attualmente installato, ma disabilitato. Usa il pulsante 'abilita' per riabilitare. - + This Addon will be enabled next time you restart FreeCAD. Questa estensione sarà abilitata al prossimo riavvio di FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Questa estensione sarà disabilitata al prossimo riavvio di FreeCAD. - + Success Operazione riuscita - + Branch change succeeded, please restart to use the new version. Cambio branch effettuato, riavvia l'applicazione per utilizzare la nuova versione. - - Changed to git ref '{}' -- please restart to use Addon. - Cambiato in git ref '{}' -- si prega di riavviare per utilizzare Addon. - - - + Install Installa - + Uninstall Disinstalla - - Check for Update - Controlla aggiornamenti - - - - Run Macro - Esegui macro - - - - Change Branch - Cambia Ramo - - - + Enable Abilita - + Disable Disabilita - + + Check for update + Check for update + + + + Run + esegui + + + + Change branch... + Change branch... + + + Return to package list Ritorna alla lista dei pacchetti @@ -1558,7 +1544,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Failed to create installation manifest file: - Failed to create installation manifest file: + Creazione del file manifest di installazione non riuscita: @@ -1577,9 +1563,9 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Seleziona un file icona per questo elemento di contenuto + - {} is not a subdirectory of {} {} non è una sottodirectory di {} @@ -1595,6 +1581,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili + Workbench Ambiente @@ -1779,19 +1766,19 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili - + A macro installed with the FreeCAD Addon Manager Una macro installata con FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' esegui - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Impossibile leggere i dati da GitHub: controllare la connessione internet e le impostazioni proxy e riprovare. @@ -1900,140 +1887,138 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Seleziona un file icona per questo pacchetto - + Filter is valid Filtro valido - + Filter regular expression is invalid L'espressione regolare del filtro non è valida - + + Search... + Cerca... + + + Click for details about package {} Clicca per i dettagli sul pacchetto {} - + Click for details about workbench {} Clicca per i dettagli sull'ambiente di lavoro {} - + Click for details about macro {} Clicca per i dettagli sulla macro {} - + Maintainers: Manutentori: - + Tags Etichette - + updated aggiornato - - + + Up-to-date Aggiornato - - - + + + + + Update available Aggiornamento disponibile + - Pending restart Riavvio in sospeso - - + + DISABLED DISABILITATO - + Installed version Versione installata - + Unknown version Versione sconosciuta - + Installed on Installato il - + Available version Versione disponibile - - Show Addons containing: - Mostra Addons contenente: + + Filter by... + Filter by... - - All - Tutti + + Addon Type + Addon Type - - Workbenches - Ambienti di lavoro - - - - Macros - Macro - - - - Preference Packs - Pacchetti Preferenze - - - - Status: - Stato: - - - + + Any Qualsiasi - + + Macro + Macro + + + + Preference Pack + Pacchetto Preferenze + + + + Installation Status + Installation Status + + + Not installed Non installato - + Filter Filtro - - - OK - OK - DANGER: Developer feature @@ -2058,19 +2043,19 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Local Table header for local git ref name - Local + Locale Remote tracking Table header for git remote tracking branch name - Remote tracking + Monitoraggio remoto Last Updated Table header for git update date - Last Updated + Ultimo aggiornamento @@ -2093,83 +2078,83 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Installazione dell'Addon {} fallita - + Downloaded package.xml for {} Scaricato package.xml per {} - + Failed to decode {} file for Addon '{}' Impossibile decodificare il file {} per Addon '{}' - + Any dependency information in this file will be ignored Qualsiasi informazione sulla dipendenza in questo file verrà ignorata - + Downloaded metadata.txt for {} Scaricato metadati.txt per {} - + Downloaded requirements.txt for {} Scaricato requirements.txt per {} - + Downloaded icon for {} Scaricata Icona per {} - + Unable to open macro wiki page at {} Impossibile aprire la pagina wiki della macro su {} - + Unable to fetch the code of this macro. Impossibile recuperare il codice di questa macro. - + Unable to retrieve a description from the wiki for macro {} Impossibile recuperare una descrizione dalla wiki per macro {} - + Unable to open macro code URL {} Impossibile aprire l'URL del codice macro {} - + Unable to fetch macro-specified file {} from {} Impossibile recuperare il file macro specificato {} da {} - + Could not locate macro-specified file {} (expected at {}) Impossibile individuare il file specificato dalla macro {} (dovrebbe trovarsi a {}) - + {}: Unrecognized internal workbench '{}' {}: ambiente di lavoro interno non riconosciuto '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Errore durante l'importazione di {} @@ -2313,17 +2298,17 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili - + Retrieving macro description... Recupero descrizione macro... - + Retrieving info from git Recupero informazioni da git - + Retrieving info from wiki Recupero informazioni dal wiki @@ -2357,7 +2342,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Git branch rename failed with the following message: - Git branch rename failed with the following message: + Impossibile rinominare il ramo Git con il seguente messaggio: @@ -2385,25 +2370,40 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili alcuni addons potrebbero essere stati aggiornati - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Impossibile scaricare i dati da {} -- ricevuto il codice di risposta {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Gestisci ambienti di lavoro, macro e pacchetti di preferenze esterni @@ -2440,7 +2440,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili QObject - + Addon Manager Addon manager diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm index fae7ef0d11..df246efe9c 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index bdeab19857..b84a0ed46e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -22,31 +22,31 @@ CompactView - + Icon アイコン - + <b>Package Name</b> <b>パッケージ名</b> - + Version バージョン - + Description 説明 - + Update Available 利用可能なアップデートがあります @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager アドオン・マネージャー - - - Downloading info... - ダウンロード情報.... - - - - Stop the cache update - キャッシュの更新を停止 - - - - Refresh local cache - ローカルキャッシュを更新 - - - - Download and apply all available updates - 利用可能な全てのアップデートをダウンロードして適用する - - - - Update all Addons - すべてのアドオンを更新 - - - - Check for updates - アップデートを確認 - - - - View and update Python package dependencies - Pythonパッケージの依存関係の表示と更新 - - - - Python dependencies... - Python の依存関係... - - - - Developer tools... - 開発者ツール... - - - - Close the Addon Manager - アドオン・マネージャーを閉じる - - - - Close - 閉じる - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Python 2 専用のアドオンを非表示 - + Hide Addons marked Obsolete 廃止されたアドオンを非表示 - + Hide Addons that require a newer version of FreeCAD 新しいバージョンの FreeCAD が必要なアドオンを非表示 - + Custom repositories カスタムリポジトリ - + Proxy プロキシ - + No proxy プロキシを使用しない - + User system proxy ユーザーシステムプロキシ - + User-defined proxy: ユーザー定義プロキシ: - + Path to git executable (optional): Git 実行ファイルのパス (オプション): - + The path to the git executable. Autodetected if needed and not specified. Git実行ファイルのパス。指定されていない場合には必要時に自動検出されます。 - + Advanced Options 詳細設定 - + Show option to change branches (requires git) ブランチ変更オプションを表示 (gitが必要) - + Disable git (fall back to ZIP downloads only) Git を無効にする (ZIP ダウンロードのみに戻ります) - + Activate Addon Manager options intended for developers of new Addons. 新しいアドオン開発者向けのアドオン・マネージャー・オプションを有効にします。 - + Addon developer mode アドオン開発者モード @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1168,84 +1128,115 @@ installed addons will be checked for available updates - + Addon manager アドオン・マネージャー - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now 今すぐ再起動 - + Restart later 後で再起動 - - + + Refresh local cache ローカルキャッシュを更新 - + Updating cache... キャッシュを更新しています... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... アップデートを確認中… - - Apply {} update(s) - Apply {} update(s) + + + Close + 閉じる - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer メンテナー - - + + Author 作成者 @@ -1266,7 +1257,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1281,27 +1272,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1342,162 +1333,157 @@ installed addons will be checked for available updates アンインストールに失敗しました - + Version {version} installed on {date} {date} にバージョン {version} がインストールされました - + Version {version} installed バージョン {version} がインストールされました - + Installed on {date} {date} にインストールされました - - - - + + + + Installed インストール済み - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - 利用可能なアップデートがあります - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete 警告: このアドオンは廃止されています。 - - WARNING: This addon is Python 2 Only - 警告: このアドオンは Python 2 のみです。 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - 警告: このアドオンは FreeCAD が必要です。 + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. 警告: このアドオンは現在インストールされていますが無効になっています。再度有効にするには '有効' ボタンを使用してください。 - + This Addon will be enabled next time you restart FreeCAD. このアドオンは次回 FreeCAD を再起動したときに有効になります。 - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install インストール - + Uninstall アンインストール· - - Check for Update - Check for Update - - - - Run Macro - マクロの実行 - - - - Change Branch - ブランチの変更 - - - + Enable 有効 - + Disable 無効化 - + + Check for update + Check for update + + + + Run + 実行 + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1575,9 +1561,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1593,6 +1579,7 @@ installed addons will be checked for available updates + Workbench ワークベンチ @@ -1777,19 +1764,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' 実行 - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1898,140 +1885,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + 検索... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags タグ - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version インストール済のバージョン - + Unknown version Unknown version - + Installed on Installed on - + Available version 利用可能なバージョン - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - すべて + + Addon Type + Addon Type - - Workbenches - ワークベンチ - - - - Macros - マクロ - - - - Preference Packs - Preference Packs - - - - Status: - ステータス: - - - + + Any 任意 - + + Macro + マクロ + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter フィルター - - - OK - OK - DANGER: Developer feature @@ -2091,83 +2076,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} マクロ {} の説明をウィキから取得できません。 - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2311,17 +2296,17 @@ installed addons will be checked for available updates - + Retrieving macro description... マクロの説明を取得... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2383,25 +2368,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2438,7 +2438,7 @@ installed addons will be checked for available updates QObject - + Addon Manager アドオン・マネージャー diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm index d270a7034c..252262945b 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts index a4cee42789..d27fe65571 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts @@ -22,31 +22,31 @@ CompactView - + Icon ხატულა - + <b>Package Name</b> <b>პაკეტის სახელი</b> - + Version ვერსია - + Description აღწერა - + Update Available ხელმისაწვდომია განახლება @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager დამატებების მმართველი - - - Downloading info... - ინფორმაციის გადმოწერა... - - - - Stop the cache update - კეშის განახლების გაჩერება - - - - Refresh local cache - ლოკალური კეშის განახლება - - - - Download and apply all available updates - ყველა შესაძლო განახლების გადმოწერა და გადატარება - - - - Update all Addons - ყველა დამატების განახლება - - - - Check for updates - განახლების შემოწმება - - - - View and update Python package dependencies - Python-ის პაკეტის დამოკიდებულებების ნახვა და განახლება - - - - Python dependencies... - Python-ის დამოკიდებულებები... - - - - Developer tools... - პროგრამისტის ხელსაწყოები... - - - - Close the Addon Manager - დამატებების მმართველის დახურვა - - - - Close - დახურვა - Edit Tags @@ -598,76 +543,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only მხოლოდ Python v2-თან თავსებადი დამატებების დამალვა - + Hide Addons marked Obsolete მოძველებულად მონიშნული დამატებების დამალვა - + Hide Addons that require a newer version of FreeCAD იმ დამატებების დამალვა, რომელსაც FreeCAD-ის უფრო ახალი ვერსია სჭირდებათ - + Custom repositories ხელით მითითებული რეპოზიტორიები - + Proxy პროქსი - + No proxy პროქსის გარეშე - + User system proxy მომხმარებლის სისტემური პროქსი - + User-defined proxy: მომხმარებლის პროქსი: - + Path to git executable (optional): 'git'-ის გამშვები ფაილის ბილიკი (არასავალდებულოა): - + The path to the git executable. Autodetected if needed and not specified. ბილიკი git-ის გამშვებ ფაილამდე. შეივსება ავტომატურად, თუ ის საჭიროა, მითითებული კი არა. - + Advanced Options დამატებითი პარამეტრები - + Show option to change branches (requires git) ბრენჩების ცვლილების მხარდაჭერის ჩართვა (საჭიროა Git) - + Disable git (fall back to ZIP downloads only) Git-ის გამორთვა (გამოყენებული იქნება მხოლოდ ZIP ფაილები) - + Activate Addon Manager options intended for developers of new Addons. დამატებების მმართველში ახალი დამატებების პროგრამისტებისათვის განკუთვნილი პარამეტრების აქტივაცია. - + Addon developer mode დამატების პროგრამისტის რეჟიმი @@ -958,7 +918,7 @@ installed addons will be checked for available updates Change to branch: - Change to branch: + შეცვლა ბრენჩზე: @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... გაშვება... - + Loading addon information დამატების შესახებ ინფორმაციის ჩატვირთვა - + Worker process {} is taking a long time to stop... დამხმარე პროცესი {} გაჩერებას მეტისმეტად დიდხანს უნდება... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager დამატებების მმართველი - + You must restart FreeCAD for changes to take effect. ცვლილებების ძალაში შესასვლელად საჭიროა FreeCAD-ის გადატვირთვა. - + Restart now ახლავე გადატვირთვა - + Restart later მოგვიანებით გადატვირთვა - - + + Refresh local cache ლოკალური კეშის განახლება - + Updating cache... კეშის განახლება... - + Could not find addon '{}' to select ასარჩევი განახლება ნაპოვნი არაა'{}' - - + + Checking for updates... განახლების შემოწმება... - - Apply {} update(s) - {} განახლების გადატარება + + + Close + დახურვა - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available განახლებები ხელმისაწვდომი არაა - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. ახალი დამყენებლის გაშვება მაშინ, როცა წინა ჯერ არ დასრულებულა, შეუძლებელია. - + Execution of macro failed. See console for failure details. მაკროს შესრულების შეცდომა. მეტი დეტალებისთვის იხილეთ კონსოლი. - - + + Maintainer წამყვანი პროგრამისტი - - + + Author ავტორი @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update განახლება @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates QtNetwork-ის შემოტანის შეცდომა. როგორც ჩანს, ის თქვენს სისტემაზე დაყენებული არაა. თქვენს მომწოდებელს შეიძლება მისთვის ცალკე პაკეტი ჰქონდეს (ხშირად ჰქვია "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number მითითებული პოროქსის პორტის '{}' პორტის ნომრად გარდაქმნის შეცდომა - + Parameter error: mutually exclusive proxy options set. Resetting to default. პარამეტრის შეცდომა: პროქსის ურთიერთგამომრიცხავი პარამეტრები. დაბრუნებული იქნება ნაგულისხმევი მნიშვნელობები. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. პარამეტრის შეცდომა: მომხმარებლის პროქსი ჩართულია, მაგრამ მითითებული არაა. გამოყენებული იქნება ნაგულისხმევი მნიშვნელობები. - + Addon Manager: Unexpected {} response from server დამატებების მმართველი: სერვერის მოულოდნელი პასუხი: {} - + Error with encrypted connection დაშიფრული კავშირის შეცდომა @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates წაშლის შეცდომა - + Version {version} installed on {date} დაყენებული ვერსია {version}. თარიღი {date} - + Version {version} installed დაყენებული ვერსია {version} - + Installed on {date} ინსტალაციის თარიღი {date} - - - - + + + + Installed დაყენებულია - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + ამჟამად ვარ ბრენჩზე {}. სახელი შეიცვალა მნიშვნელობაზე {} - - On branch {}, update available to version - ხელმისაწვდომი განახლება ბრენჩზე {} - - - - Update available to version - ხელმისაწვდომია განახლება ვერსიამდე - - - - An update is available - განახლება ხელმისაწვდომია - - - + Git tag '{}' checked out, no updates possible Git ჭდით '{}' შემოწმდა. განახლებები ხელმიუწვდომელია - - This is the latest version available for branch {} - ეს ბრენჩის {} უახლესი ვერსიაა - - - - Updated, please restart FreeCAD to use - განახლდა. გამოსაყენებლად გთხოვთ გადატვირთოთ FreeCAD - - - + Update check in progress მიმდინარეობს განახლებების შემოწმება - - Automatic update checks disabled - განახლებების ავტომატური შემოწმება გამორთულია - - - + Installation location დაყენების ადგილი - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + გათიშული + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete გაფრთხილება: ეს დამატება მოძველებულია - - WARNING: This addon is Python 2 Only - გაფრთხილება: ეს დამატება მუშაობს მხოლოდ Python v2-ზე + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - გაფრთხილება: ამ დამატებას სჭირდება FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. გაფრთხილება: ეს დამატება ამჟამად დაყენებულია, მაგრამ გამორთული. ჩასართავად გამოიყენეთ 'ჩართვის' ღილაკი. - + This Addon will be enabled next time you restart FreeCAD. ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ ჩაირთვება. - + This Addon will be disabled next time you restart FreeCAD. ეს დამატება მხოლოდ FreeCAD-ის მორიგი რესტარტის შემდეგ გაითიშება. - + Success წარმატება - + Branch change succeeded, please restart to use the new version. ბრენჩი წარმატებით შეიცვალა. ახალი ვერსიის გამოსაყენებლად საჭიროა გადატვირთვა. - - Changed to git ref '{}' -- please restart to use Addon. - Git ref შეიცვალა '{}' - დამატებით გამოსაყენებლად გადატვირთეთ. - - - + Install დაყენება - + Uninstall წაშლა - - Check for Update - განახლების შემოწმება - - - - Run Macro - მაკროს გაშვება - - - - Change Branch - ბრენჩის შეცვლა - - - + Enable ჩართვა - + Disable გამორთვა - + + Check for update + Check for update + + + + Run + გაშვება + + + + Change branch... + Change branch... + + + Return to package list პაკეტების სიასთან დაბრუნება @@ -1558,7 +1544,7 @@ installed addons will be checked for available updates Failed to create installation manifest file: - Failed to create installation manifest file: + დაყენების მანიფესტის ფაილის შექმნა ჩავარდა: @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates აირჩიეთ ხატულას ფაილი ამ შემცველობის ელემენტისთვის + - {} is not a subdirectory of {} {} -ი {}-ის ქვესაქაღალდეს არ წარმოადგენს @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench სამუშაო მაგიდა @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager FreeCAD-ის დამატებების მმართველით დაყენებული მაკრო - + Run Indicates a macro that can be 'run' გაშვება - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. GitHub-დან მონაცემების წაკითხვა შეუძლებელია. შეამოწმეთ ინტერნეტთან შეერთებისა და პროქსის პარამეტრებ და თავიდან სცადეთ. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates აირჩიეთ ამ პაკეტის ხატულა - + Filter is valid ფილტრი სწორია - + Filter regular expression is invalid ფილტრის რეგულარული გამოსახულება არასწორია - + + Search... + ძებნა... + + + Click for details about package {} პაკეტის დეტალების გასაგებად დააწკაპუნეთ {} - + Click for details about workbench {} სამუშაო მაგიდის დეტალების გასაგებად დააწკაპუნეთ {} - + Click for details about macro {} მაკროს დეტალების სანახავად დააწკაპუნეთ {} - + Maintainers: პროექტის ლიდერები: - + Tags ჭდეები - + updated განახლებულია - - + + Up-to-date განახლებულია - - - + + + + + Update available განახლება ხელმისაწვდომია + - Pending restart რესტარტის მოლოდინი - - + + DISABLED გათიშულია - + Installed version დაყენებული ვერსია - + Unknown version უცნობი ვერსია - + Installed on დაყენების დრო - + Available version ხელმისაწვდომი ვერსია - - Show Addons containing: - იმ გაფ-ების ჩვენება, რომლებიც შეიცავენ: + + Filter by... + Filter by... - - All - ყველა + + Addon Type + Addon Type - - Workbenches - სამუშაო მაგიდები - - - - Macros - მაკროები - - - - Preference Packs - პარამეტრების პაკეტები - - - - Status: - მდგომარეობა: - - - + + Any ნებისმიერი - + + Macro + მაკრო + + + + Preference Pack + პარამეტრების პაკეტი + + + + Installation Status + Installation Status + + + Not installed არ არის დაყენებული - + Filter ფილტრი - - - OK - დიახ - DANGER: Developer feature @@ -2058,19 +2043,19 @@ installed addons will be checked for available updates Local Table header for local git ref name - Local + ლოკალური Remote tracking Table header for git remote tracking branch name - Remote tracking + დაშორებული ტრეკინგი Last Updated Table header for git update date - Last Updated + ბოლოს განახლებული @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates დამატების "{}" დაყენების შეცდომა - + Downloaded package.xml for {} {}-ის package.xml გადმოწერილია - + Failed to decode {} file for Addon '{}' {} ფაილის გაშიფვრის შეცდომა დამატებისთვის '{}' - + Any dependency information in this file will be ignored ამ ფაილში არსებული ნებისმიერი დამოკიდებულება იგნორირებული იქნება - + Downloaded metadata.txt for {} {}-ის metadata.txt გადმოწერილია - + Downloaded requirements.txt for {} {}-ის requirements.txt გადმოწერილია - + Downloaded icon for {} ხატულა გადმოწერილია {} - + Unable to open macro wiki page at {} მაკროების ვიკის გვერდის {} გახსნის შეცდომა - + Unable to fetch the code of this macro. მაკროს კოდის მოპოვება შეუძლებელია. - + Unable to retrieve a description from the wiki for macro {} ვიკიდან მაკროს {} აღწერის მიღება შეუძლებელია - + Unable to open macro code URL {} მაკროს კოდის URL-ის ({}) გახსნა შეუძლებელია - + Unable to fetch macro-specified file {} from {} შეცდომა მაკროსთვის-მითითებული ფაილის {} {}-დან გამოთხოვისას - + Could not locate macro-specified file {} (expected at {}) მაკროს მიერ მითითებული ფაილის {} პოვნა შეუძლებელია (ველოდი მისამართზე {}) - + {}: Unrecognized internal workbench '{}' {}: უცნობი შიდა სამუშაო დაფა '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) დამატების პროგრამისტის გაფრთხილება: რეპოს URL, რომელიც დაყენებულია დამატების {} ({}) package.xml ფაილში, არ ემთხვევა URL-ს, საიდანაც ის გადმოვწერეთ ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) დამატების პროგრამისტის გაფრთხილება: რეპოს ბრენჩი, რომელიც დაყენებულია დამატების {} ({}) package.xml ფაილში, არ ემთხვევა ბრენჩს, საიდანაც ის გადმოვწერეთ ({}) - - + + Got an error when trying to import {} შეცდომა {}-ის შემოტანის მცდელობისას @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... მაკროს აღწერის მიღება... - + Retrieving info from git ინფორმაციის git-დან მიღება - + Retrieving info from wiki ინფორმაციის wiki-დან მიღება @@ -2357,7 +2342,7 @@ installed addons will be checked for available updates Git branch rename failed with the following message: - Git branch rename failed with the following message: + Git-ის ბრენჩის სახელის გადარქმევა ჩავარდა შემდეგი შეტყობინებით: @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates ზოგიერთი განახლებ შეიძლება განახლდა - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + {}-დან მონაცემების გადმოწერა ჩავარდა - მივიღე პასუხის კოდი {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &დამატებების მმართველი - + Manage external workbenches, macros, and preference packs მართეთ გარე სამუშაო მაგიდები, მაკროები და პარამეტრების ნაკრებები @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager დამატებების მმართველი diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm index 915b45ddd5..1a1124dc08 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts index 11580fd503..d695db8aeb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -22,31 +22,31 @@ CompactView - + Icon 아이콘 - + <b>Package Name</b> <b>패키지 이름</b> - + Version 버전 - + Description 설명 - + Update Available Update Available @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager 애드온 매니저 - - - Downloading info... - Downloading info... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - 로컬 캐시 비우기 - - - - Download and apply all available updates - 가능한 업데이트를 내려받고 적용 - - - - Update all Addons - 모든 애드온 업데이트 - - - - Check for updates - 업데이트 확인 - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - 파이썬 의존성... - - - - Developer tools... - 개발자 도구... - - - - Close the Addon Manager - 애드온 매니저 닫기 - - - - Close - 닫기 - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only 파이썬 2 전용으로 표시된 애드온 숨기기 - + Hide Addons marked Obsolete 사용되지 않음으로 표시된 애드온 숨기기 - + Hide Addons that require a newer version of FreeCAD 최신 버전의 FreeCAD가 필요한 애드온 숨기기 - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy No proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Advanced Options - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache 로컬 캐시 비우기 - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + 닫기 - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author 작성자: @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update 업데이트 @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Install - + Uninstall Uninstall - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Change Branch - - - + Enable 활성화 - + Disable Disable - + + Check for update + Check for update + + + + Run + 실행 + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench 워크벤치 @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' 실행 - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + 검색하기... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags 태그 - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - 전체 + + Addon Type + Addon Type - - Workbenches - 워크벤치 - - - - Macros - 매크로 - - - - Preference Packs - Preference Packs - - - - Status: - 상태: - - - + + Any Any - + + Macro + 매크로 + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter 필터 - - - OK - 확인 - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager 애드온 매니저 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm index ab3c7a3286..35b0f228c8 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index 81ced96a83..f2b2b0f3fe 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -22,31 +22,31 @@ CompactView - + Icon Pictogram - + <b>Package Name</b> <b>Pakket Naam</b> - + Version Versie - + Description Omschrijving - + Update Available Update beschikbaar @@ -258,61 +258,6 @@ Wilt u dat de Uitbreidingsmanager deze automatisch installeert? Kies "Neger Addon Manager Uitbreidingsmanager - - - Downloading info... - Info downloaden... - - - - Stop the cache update - Cache update stoppen - - - - Refresh local cache - Lokale cache vernieuwen - - - - Download and apply all available updates - Download en pas alle beschikbare updates toe - - - - Update all Addons - Update alle uitbreidingen - - - - Check for updates - Op updates controleren - - - - View and update Python package dependencies - Bekijk en update Python pakket afhankelijkheden - - - - Python dependencies... - Python afhankelijkheden... - - - - Developer tools... - Ontwikkelaars gereedschap... - - - - Close the Addon Manager - Sluit uitbreidingsmanager - - - - Close - Sluiten - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Verberg uitbreidingen die gemarkeerd zijn als -Alleen voor Python 2- - + Hide Addons marked Obsolete Verberg uitbreidingen die gemarkeerd zijn als -Obsolete- - + Hide Addons that require a newer version of FreeCAD Verberg uitbreidingen die een nieuwere versie van FreeCAD vereisen - + Custom repositories Aangepaste repositories - + Proxy Proxy - + No proxy Geen proxy - + User system proxy Proxy van het systeem van de gebruiker - + User-defined proxy: Proxy gedefinieerd door gebruiker: - + Path to git executable (optional): Pad naar git executable (optioneel): - + The path to the git executable. Autodetected if needed and not specified. Het pad naar het git uitvoerbare bestand. Automatisch gedetecteerd indien nodig en niet opgegeven. - + Advanced Options Geavanceerde Opties - + Show option to change branches (requires git) Toon de mogelijkheid om branches te wijzigen (vereist git) - + Disable git (fall back to ZIP downloads only) Schakel git uit (gebruik alleen ZIP downloads) - + Activate Addon Manager options intended for developers of new Addons. Activeer de voorkeuren voor Uitbreidingsmanager voor ontwikkelaars van nieuwe uitbreidingen. - + Addon developer mode Uitbreiding ontwikkelaar gereedschappen @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Opstarten... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1168,84 +1128,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. U moet FreeCAD herstarten om de wijzigingen toe te passen. - + Restart now Nu opnieuw opstarten - + Restart later Later opnieuw opstarten - - + + Refresh local cache Lokale cache vernieuwen - + Updating cache... Bezig met updaten van cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Zoeken naar updates... - - Apply {} update(s) - {} update(s) toepassen + + + Close + Sluiten - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Geen updates beschikbaar - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Kan geen nieuw installatieprogramma starten totdat de vorige klaar is. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Beheerder - - + + Author Auteur @@ -1266,7 +1257,7 @@ installed addons will be checked for available updates - + Update Update @@ -1281,27 +1272,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1342,162 +1333,157 @@ installed addons will be checked for available updates Verwijderen mislukt - + Version {version} installed on {date} Versie {version} geïnstalleerd op {date} - + Version {version} installed Versie {version} geïnstalleerd - + Installed on {date} Geïnstalleerd op {date} - - - - + + + + Installed Geïnstalleerd - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update beschikbaar voor versie - - - - An update is available - Er is een update beschikbaar - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Bijgewerkt, herstart FreeCAD om te gebruiken - - - + Update check in progress Controle van updates bezig - - Automatic update checks disabled - Automatische updatecontroles uitgeschakeld - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Geslaagd - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Installeren - + Uninstall De-installeren - - Check for Update - Controleren op update - - - - Run Macro - Macro uitvoeren - - - - Change Branch - Change Branch - - - + Enable Schakel in - + Disable Uitschakelen - + + Check for update + Check for update + + + + Run + Uitvoeren + + + + Change branch... + Change branch... + + + Return to package list Terug naar de lijst met pakketten @@ -1575,9 +1561,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is geen submap van {} @@ -1593,6 +1579,7 @@ installed addons will be checked for available updates + Workbench Werkbank @@ -1709,7 +1696,7 @@ installed addons will be checked for available updates Cannot execute pip - Cannot execute pip + Kan -pip- niet uitvoeren @@ -1777,19 +1764,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Uitvoeren - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1898,140 +1885,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is geldig - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Zoeken... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Beheerders: - + Tags Labels - + updated bijgewerkt - - + + Up-to-date Up-to-date - - - + + + + + Update available Update beschikbaar + - Pending restart Wachten op herstarten - - + + DISABLED UITGESCHAKELD - + Installed version Geïnstalleerde versie - + Unknown version Onbekende versie - + Installed on Geïnstalleerd op - + Available version Beschikbare versie - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Alle + + Addon Type + Addon Type - - Workbenches - Werkbanken - - - - Macros - Macro's - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Elke - + + Macro + Macro + + + + Preference Pack + Voorkeurspakket + + + + Installation Status + Installation Status + + + Not installed Niet geïnstalleerd - + Filter Filter - - - OK - OK - DANGER: Developer feature @@ -2091,83 +2076,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Er is een fout opgetreden bij het importeren van {} @@ -2311,17 +2296,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Informatie ophalen van git - + Retrieving info from wiki Informatie ophalen van wiki @@ -2383,25 +2368,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Uitbreidingsmanager - + Manage external workbenches, macros, and preference packs Beheer externe werkbanken, macro's en voorkeurspakketten @@ -2438,7 +2438,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Uitbreidingsmanager diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm index 855bda29ef..0f3b5ee1d7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 515f19f6a3..1742c60dee 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikonka - + <b>Package Name</b> <b>Nazwa pakietu</b> - + Version Wersja - + Description Opis - + Update Available Aktualizacja jest dostępna @@ -258,61 +258,6 @@ Czy chcesz, aby Menadżer dodatków zainstalował je automatycznie? Wybierz "Zig Addon Manager Menedżer dodatków - - - Downloading info... - Pobieranie informacji... - - - - Stop the cache update - Zatrzymaj aktualizację pamięci podręcznej - - - - Refresh local cache - Odśwież pamięć podręczną - - - - Download and apply all available updates - Pobierz i zainstaluj wszystkie dostępne aktualizacje - - - - Update all Addons - Aktualizuj wszystkie dodatki - - - - Check for updates - Sprawdź dostępność aktualizacji - - - - View and update Python package dependencies - Wyświetl i zaktualizuj zależności pakietów środowiska Python - - - - Python dependencies... - Zależności środowiska Python ... - - - - Developer tools... - Narzędzia programisty ... - - - - Close the Addon Manager - Zamknij Menedżera dodatków - - - - Close - Zamknij - Edit Tags @@ -599,76 +544,91 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Ukryj dodatki wymagające środowiska Python 2 - + Hide Addons marked Obsolete Ukryj dodatki oznaczone jako przestarzałe - + Hide Addons that require a newer version of FreeCAD Ukryj dodatki, które wymagają nowszej wersji programu FreeCAD - + Custom repositories Repozytoria użytkownika - + Proxy Serwer pośredniczący - + No proxy Bez serwera pośredniczącego - + User system proxy Użyj ustawień serwera pośredniczącego z systemu - + User-defined proxy: Serwer pośredniczący użytkownika: - + Path to git executable (optional): Ścieżka do pliku wykonywalnego Git (opcjonalnie): - + The path to the git executable. Autodetected if needed and not specified. Ścieżka do pliku wykonywalnego git. W razie potrzeby wykrywana automatycznie, jeśli nie została określona. - + Advanced Options Opcje zaawansowane - + Show option to change branches (requires git) Pokaż opcję zmiany gałęzi (wymaga git) - + Disable git (fall back to ZIP downloads only) Wyłącz Git (powróć do pobierania tylko w formacie ZIP) - + Activate Addon Manager options intended for developers of new Addons. Aktywuj opcje Menedżera dodatków przeznaczone dla twórców nowych dodatków. - + Addon developer mode Tryb dewelopera dodatków @@ -958,7 +918,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Change to branch: - Change to branch: + Zmień na gałąź: @@ -1141,17 +1101,17 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji AddonsInstaller - + Starting up... Uruchamianie ... - + Loading addon information Wczytywanie informacji o dodatku - + Worker process {} is taking a long time to stop... Zatrzymanie działającego procesu {} zajmuje dużo czasu ... @@ -1169,84 +1129,115 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Zmieniono listę repozytoriów użytkownika, wymuszając ponowne buforowanie ... - + Addon manager Menadżera dodatków - + You must restart FreeCAD for changes to take effect. Musisz zrestartować FreeCAD, aby zmiany zaczęły obowiązywać. - + Restart now Uruchom ponownie teraz - + Restart later Uruchom ponownie później - - + + Refresh local cache Odśwież pamięć podręczną - + Updating cache... Aktualizowanie pamięci podręcznej ... - + Could not find addon '{}' to select Nie można znaleźć dodatku "{}"; do wybrania - - + + Checking for updates... Sprawdzam dostępność aktualizacji ... - - Apply {} update(s) - Wykonaj {} aktualizacje + + + Close + Zamknij - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Brak dostępnych aktualizacji - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Nie można uruchomić nowego instalatora, dopóki poprzedni instalator nie zakończy pracy. - + Execution of macro failed. See console for failure details. Wykonanie makrodefinicji nie powiodło się. Szczegóły awarii znajdują się w konsoli. - - + + Maintainer Opiekun - - + + Author Autor @@ -1267,7 +1258,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji - + Update Zaktualizuj @@ -1282,27 +1273,27 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Nie można zaimportować QtNetwork -- nie jest zainstalowany w Twoim systemie. Twój dostawca może mieć pakiet dla tej zależności (często nazywany np. "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Nie udało się przekonwertować określonego portu serwera pośredniczącego "{}"; na numer portu - + Parameter error: mutually exclusive proxy options set. Resetting to default. Błąd parametru: ustawiono wzajemnie wykluczające się opcje serwera pośredniczącego. Resetowanie do wartości domyślnych. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Błąd parametru: wskazano serwer pośredniczący użytkownika, ale nie podano serwera pośredniczącego. Przywrócenie ustawień domyślnych. - + Addon Manager: Unexpected {} response from server Menedżer dodatków: Nieoczekiwana odpowiedź {} z serwera - + Error with encrypted connection Błąd z połączeniem szyfrowanym @@ -1343,162 +1334,157 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Odinstalowanie nie powiodło się - + Version {version} installed on {date} Wersja {version} została zainstalowana: {date} - + Version {version} installed Wersja {version} zainstalowana - + Installed on {date} Data instalacji {date} - - - - + + + + Installed Zainstalowano - + Currently on branch {}, name changed to {} - Currently on branch {}, name changed to {} + Obecnie w gałęzi {}, nazwa została zmieniona na {} - - On branch {}, update available to version - W gałęzi {} aktualizacja dostępna do wersji - - - - Update available to version - Aktualizacja dostępna do wersji - - - - An update is available - Dostępna jest aktualizacja - - - + Git tag '{}' checked out, no updates possible Identyfikator Git "{}" sprawdzony, brak możliwości aktualizacji - - This is the latest version available for branch {} - To jest najnowsza wersja dostępna dla gałęzi {} - - - - Updated, please restart FreeCAD to use - Zaktualizowano, uruchom ponownie program FreeCAD - - - + Update check in progress Sprawdzanie aktualizacji w toku - - Automatic update checks disabled - Automatyczne sprawdzanie aktualizacji wyłączone - - - + Installation location Miejsce instalacji - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Wyłączone + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete UWAGA: Ten dodatek jest przestarzały - - WARNING: This addon is Python 2 Only - UWAGA: Ten dodatek jest przeznaczony tylko dla środowiska Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - OSTRZEŻENIE: Ten dodatek wymaga programu FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. OSTRZEŻENIE: Ten dodatek jest obecnie zainstalowany, ale wyłączony. Użyj przycisku "włącz", aby go ponownie włączyć. - + This Addon will be enabled next time you restart FreeCAD. Ten dodatek zostanie włączony przy następnym ponownym uruchomieniu programu FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Ten dodatek zostanie wyłączony przy ponownym uruchomieniu programu FreeCAD. - + Success Zakończono pomyślnie - + Branch change succeeded, please restart to use the new version. Zmiana gałęzi powiodła się, uruchom ponownie, aby użyć nowej wersji. - - Changed to git ref '{}' -- please restart to use Addon. - Zmieniono w Git Reference's "{}" - Ponowne uruchomienie jest wymagane do użycia dodatku. - - - + Install Zainstaluj - + Uninstall Odinstaluj - - Check for Update - Sprawdź dostępność aktualizacji - - - - Run Macro - Uruchom makrodefinicję - - - - Change Branch - Zmień gałąź - - - + Enable Włącz - + Disable Wyłącz - + + Check for update + Check for update + + + + Run + uruchom + + + + Change branch... + Change branch... + + + Return to package list Wróć do listy pakietów @@ -1557,7 +1543,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Failed to create installation manifest file: - Failed to create installation manifest file: + Nie udało się utworzyć pliku informacji o instalacji: @@ -1576,9 +1562,9 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Wybierz plik ikon dla tego elementu + - {} is not a subdirectory of {} {} nie jest podkatalogiem {} @@ -1594,6 +1580,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji + Workbench Środowiska pracy @@ -1778,19 +1765,19 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji - + A macro installed with the FreeCAD Addon Manager Makro zainstalowane przy pomocy Menedżera dodatków FreeCAD - + Run Indicates a macro that can be 'run' Uruchom - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Nie można odczytać danych z GitHub: sprawdź swoje połączenie internetowe i ustawienia serwera pośredniczącego i spróbuj ponownie. @@ -1899,140 +1886,138 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Wybierz plik ikon dla tego pakietu - + Filter is valid Filtr jest prawidłowy - + Filter regular expression is invalid Wyrażenie regularne filtra jest nieprawidłowe - + + Search... + Szukaj ... + + + Click for details about package {} Kliknij, aby uzyskać informacje o pakiecie {} - + Click for details about workbench {} Kliknij, aby uzyskać informacje o środowisku pracy {} - + Click for details about macro {} Kliknij, aby uzyskać informacje o makrodefinicji {} - + Maintainers: Opiekunowie: - + Tags Znaczniki - + updated zaktualizowano - - + + Up-to-date Aktualny - - - + + + + + Update available Dostępna aktualizacja + - Pending restart Oczekuje na ponowne uruchomienie - - + + DISABLED WYŁĄCZONY - + Installed version Wersja zainstalowana - + Unknown version Nieznana wersja - + Installed on Data instalacji - + Available version Wersja dostępna - - Show Addons containing: - Pokaż dodatki zawierające: + + Filter by... + Filter by... - - All - Wszystkie + + Addon Type + Addon Type - - Workbenches - Środowiska pracy - - - - Macros - Makrodefinicje - - - - Preference Packs - Pakiety preferencji - - - - Status: - Status: - - - + + Any Dowolny - + + Macro + Makrodefinicje + + + + Preference Pack + Pakiet preferencji + + + + Installation Status + Installation Status + + + Not installed Nie zainstalowano - + Filter Filtr - - - OK - OK - DANGER: Developer feature @@ -2057,19 +2042,19 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Local Table header for local git ref name - Local + Lokalnie Remote tracking Table header for git remote tracking branch name - Remote tracking + Śledzenie zdalne Last Updated Table header for git update date - Last Updated + Ostatnia aktualizacja @@ -2092,83 +2077,83 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Instalacja dodatku {} nie powiodła się - + Downloaded package.xml for {} Pobrano plik package.xml dla {} - + Failed to decode {} file for Addon '{}' Nie udało się dekodować pliku {} dla dodatku "{}" - + Any dependency information in this file will be ignored Wszelkie informacje o zależności w tym pliku zostaną zignorowane - + Downloaded metadata.txt for {} Pobrano plik metadata.txt dla {} - + Downloaded requirements.txt for {} Pobrano plik requirements.txt dla {} - + Downloaded icon for {} Pobrano plik ikonki dla {} - + Unable to open macro wiki page at {} Nie można otworzyć strony Wiki makrodefinicji w {} - + Unable to fetch the code of this macro. Nie można pobrać kodu makrodefinicji. - + Unable to retrieve a description from the wiki for macro {} Nie można pobrać opisu z Wiki dla makrodefinicji {} - + Unable to open macro code URL {} Nie można otworzyć adresu URL kodu makrodefinicji {} - + Unable to fetch macro-specified file {} from {} Nie można pobrać pliku określonego przez makrodefinicję {} z {} - + Could not locate macro-specified file {} (expected at {}) Nie można zlokalizować określonego przez makrodefinicję pliku {} (oczekiwany w {}) - + {}: Unrecognized internal workbench '{}' {}: Nierozpoznane wewnętrzne środowisko pracy "{}" - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Ostrzeżenie dla twórców dodatku: Adres URL repozytorium ustawiony w pliku package.xml dla dodatku {} ({}) nie pasuje do adresu URL pobranego z ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Ostrzeżenie dla twórców dodatku: Gałąź repozytorium ustawiona w pliku package.xml dla dodatku {} ({}) nie pasuje do gałęzi, z której został on pobrany ({}) - - + + Got an error when trying to import {} Wystąpił błąd podczas próby zaimportowania {} @@ -2314,17 +2299,17 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji - + Retrieving macro description... Pobieranie opisu makrodefinicji ... - + Retrieving info from git Pobieranie informacji z Git - + Retrieving info from wiki Pobieranie informacji z Wiki @@ -2358,7 +2343,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji Git branch rename failed with the following message: - Git branch rename failed with the following message: + Zmiana nazwy gałęzi Git nie powiodła się, z następującym komunikatem: @@ -2386,25 +2371,40 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji niektóre dodatki mogły zostać zaktualizowane - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. - Failed to download data from {} -- received response code {}. + Nie udało się pobrać danych z {} -- otrzymano kod odpowiedzi {}. + + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view Std_AddonMgr - + &Addon manager &Menadżer dodatków - + Manage external workbenches, macros, and preference packs Zarządzanie zewnętrznymi środowiskami pracy, makroinstrukcjami i pakietami preferencji @@ -2441,7 +2441,7 @@ zainstalowane dodatki zostaną sprawdzone pod kątem dostępnych aktualizacji QObject - + Addon Manager Menedżer dodatków diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm index 311951490f..85178b9831 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index 4ca6216547..ca7d329903 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ícone - + <b>Package Name</b> <b>Nome do pacote</b> - + Version Versão - + Description Descrição - + Update Available Update Available @@ -258,61 +258,6 @@ Você quer que o Addon Manager os instale automaticamente? Escolha "Ignorar Addon Manager Gerenciador de Extensões - - - Downloading info... - Baixando informações... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Atualizar o cache local - - - - Download and apply all available updates - Baixar e aplicar todas as atualizações disponíveis - - - - Update all Addons - Update all Addons - - - - Check for updates - Check for updates - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Fechar o Gerenciador de Extensões - - - - Close - Fechar - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Ocultar Complementos marcados apenas para Python 2 - + Hide Addons marked Obsolete Ocultar Complementos marcados como obsoletos - + Hide Addons that require a newer version of FreeCAD Ocultar Complementos que requerem uma versão mais recente do FreeCAD - + Custom repositories Repositórios personalizados - + Proxy Proxy - + No proxy Sem proxy - + User system proxy Proxy do sistema do usuário - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. O caminho para o git executável. Detectado automaticamente se necessário e não especificado. - + Advanced Options Opções Avançadas - + Show option to change branches (requires git) Exibir opção para alterar branches (requer git) - + Disable git (fall back to ZIP downloads only) Desabilitar o git (voltar para downloads ZIP somente) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Atualizar o cache local - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Verificando por atualizações... - - Apply {} update(s) - Apply {} update(s) + + + Close + Fechar - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Não há atualizações disponíveis - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Não é possível iniciar um novo instalador até que o anterior tenha terminado. - + Execution of macro failed. See console for failure details. Execução de macro falhou. Veja o console para detalhes de falha. - - + + Maintainer Mantenedor - - + + Author Autor @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Atualizar @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Não foi possível importar QtNetwork -- aparentemente não está instalada em seu sistema. Seu provedor pode ter um pacote para esta dependência (frequentemente chamado "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Instalar - + Uninstall Desinstalar - - Check for Update - Check for Update - - - - Run Macro - Executar macro - - - - Change Branch - Alterar Ramo - - - + Enable Ativar - + Disable Desativar - + + Check for update + Check for update + + + + Run + executar + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Bancada @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' executar - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Procurar... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Etiquetas - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Versão instalada - + Unknown version Unknown version - + Installed on Installed on - + Available version Versão disponível - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Todos + + Addon Type + Addon Type - - Workbenches - Bancadas de trabalho - - - - Macros - Macros - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Qualquer um - + + Macro + Macro + + + + Preference Pack + Pacote de preferência + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtro - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Gerenciador de Extensões diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm index 79460dbc77..d528ad69ae 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index f84d08c78b..ed7f871575 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ícone - + <b>Package Name</b> <b>Package Name</b> - + Version Versão - + Description Descrição - + Update Available Update Available @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Gestor de Add-ons - - - Downloading info... - Descarregando informações... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Refresh local cache - - - - Download and apply all available updates - Baixar e aplicar todas as atualizações disponíveis - - - - Update all Addons - Update all Addons - - - - Check for updates - Check for updates - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Feche o Gestor de Add-ons - - - - Close - Fechar - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy Nenhum proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Caminho do executável do git (opcional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Advanced Options - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Refresh local cache - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Fechar - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author Autor @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Atualizar @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Install - + Uninstall Uninstall - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Change Branch - - - + Enable Ativar - + Disable Desativar - + + Check for update + Check for update + + + + Run + correr + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Bancada de trabalho @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' correr - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Procurar... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Tags - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Tudo + + Addon Type + Addon Type - - Workbenches - Bancadas de trabalho - - - - Macros - Macros - - - - Preference Packs - Preference Packs - - - - Status: - Estado: - - - + + Any Qualquer - + + Macro + Macro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtro - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Gestor de Add-ons diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm index 76561267c9..9f53f54251 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index e820cfa286..790490fc4b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -22,31 +22,31 @@ CompactView - + Icon Iconiță - + <b>Package Name</b> <b>Package Name</b> - + Version Versiunea - + Description Descriere - + Update Available Actualizare disponibilă @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Manager de addon - - - Downloading info... - Se descarcă informațiile... - - - - Stop the cache update - Oprește actualizarea geocutiei - - - - Refresh local cache - Refresh local cache - - - - Download and apply all available updates - Descarcă și aplică toate actualizările disponibile - - - - Update all Addons - Update all Addons - - - - Check for updates - Check for updates - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Închide Addon Manager - - - - Close - Închide - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Opțiuni Proxy - + No proxy Fără proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Advanced Options - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Refresh local cache - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Închide - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author Autor @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Actualizare @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Install - + Uninstall Uninstall - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Change Branch - - - + Enable Activeaza - + Disable Dezactivare - + + Check for update + Check for update + + + + Run + Execută + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Banc de lucru @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Execută - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Caută... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Etichete - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Toate + + Addon Type + Addon Type - - Workbenches - Banc de lucru - - - - Macros - Macro-uri - - - - Preference Packs - Preference Packs - - - - Status: - Stare: - - - + + Any Oricare - + + Macro + Macrocomandă + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtru - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Manager de addon diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm index f0eca2ba96..a70c4bdad0 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index 41430f75dd..8b8abfa87f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -22,31 +22,31 @@ CompactView - + Icon Иконка - + <b>Package Name</b> <b>Название пакета</b> - + Version Версия - + Description Описание - + Update Available Доступно обновление @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Менеджер дополнений - - - Downloading info... - Загрузка информации... - - - - Stop the cache update - Остановить обновление кэша - - - - Refresh local cache - Обновить локальный кэш - - - - Download and apply all available updates - Скачать и применить все доступные обновления - - - - Update all Addons - Обновить все дополнения - - - - Check for updates - Проверить наличие обновлений - - - - View and update Python package dependencies - Просмотр и обновление зависимостей пакета Python - - - - Python dependencies... - Зависимости Python... - - - - Developer tools... - Инструменты разработчика... - - - - Close the Addon Manager - Закрыть Менеджер дополнений - - - - Close - Закрыть - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Скрыть дополнения, помеченные "Только Python 2" - + Hide Addons marked Obsolete Скрыть дополнения, помеченные "Устаревшие" - + Hide Addons that require a newer version of FreeCAD Скрыть дополнения, которые требуют более новой версии FreeCAD - + Custom repositories Пользовательские репозитории - + Proxy Прокси-сервер - + No proxy Нет прокси - + User system proxy Системный прокси пользователя - + User-defined proxy: Заданный пользователем прокси: - + Path to git executable (optional): Путь к исполняемому файлу git (необязательно): - + The path to the git executable. Autodetected if needed and not specified. Путь к исполняемому файлу git. Определяется автоматически, если он нужен, но не указан. - + Advanced Options Расширенные настройки - + Show option to change branches (requires git) Показать опцию для смены ветвей (требуется git) - + Disable git (fall back to ZIP downloads only) Отключить git (загружать только ZIP) - + Activate Addon Manager options intended for developers of new Addons. Активировать опции менеджера расширений, предназначенные для разработчиков новых Addons. - + Addon developer mode Режим разработчика дополнений @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Запуск... - + Loading addon information Загрузка информации о дополнении - + Worker process {} is taking a long time to stop... Работающий процесс {} занимает много времени при остановке... @@ -1168,84 +1128,115 @@ installed addons will be checked for available updates - + Addon manager Менеджер дополнений - + You must restart FreeCAD for changes to take effect. Вы должны перезапустить FreeCAD, чтобы изменения вступили в силу. - + Restart now Перезагрузить сейчас - + Restart later Перезагрузить позже - - + + Refresh local cache Обновить локальный кэш - + Updating cache... Обновление кэша... - + Could not find addon '{}' to select Не удалось найти аддон '{}' для выбора - - + + Checking for updates... Проверка обновлений... - - Apply {} update(s) - Применить обновлений: {} + + + Close + Закрыть - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Нет доступных обновлений - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Невозможно запустить новую установку, пока не завершена предыдущая. - + Execution of macro failed. See console for failure details. Не удалось выполнить макрос. Подробности об ошибке смотрите в консоли. - - + + Maintainer Разработчик - - + + Author Автор @@ -1266,7 +1257,7 @@ installed addons will be checked for available updates - + Update Обновить @@ -1281,27 +1272,27 @@ installed addons will be checked for available updates Не удалось импортировать QtNetwork ― видимо, он не установлен в системе. У вашего поставщика может быть пакет для этой зависимости (обычно это "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Не удалось преобразовать указанный прокси-порт '{}' в номер порта - + Parameter error: mutually exclusive proxy options set. Resetting to default. Ошибка параметров: взаимно исключающие параметры прокси. Используются параметры по умолчанию. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Ошибка параметров: указан пользовательский прокси, но прокси не предоставлен. Используются параметры по умолчанию. - + Addon Manager: Unexpected {} response from server Менеджер дополнений: Неожиданный ответ сервера {} - + Error with encrypted connection Ошибка защищенного соединения @@ -1342,162 +1333,157 @@ installed addons will be checked for available updates Удаление не удалось - + Version {version} installed on {date} Версия {version} установлена {date} - + Version {version} installed Версия {version} установлена - + Installed on {date} Установлено {date} - - - - + + + + Installed Установлено - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - В ветке {} доступно обновление до - - - - Update available to version - Доступно обновление до версии - - - - An update is available - Доступно обновление - - - + Git tag '{}' checked out, no updates possible Метка Git '{}' извлечена, обновления не нужны - - This is the latest version available for branch {} - Это последняя версия, доступная для ветки {} - - - - Updated, please restart FreeCAD to use - Обновлено, пожалуйста, перезапустите FreeCAD для использования - - - + Update check in progress Выполняется проверка обновлений - - Automatic update checks disabled - Автоматическая проверка обновлений отключена - - - + Installation location Место установки - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Отключено + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete ВНИМАНИЕ: Это дополнение устарело - - WARNING: This addon is Python 2 Only - ВНИМАНИЕ: Это дополнение только для Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - ВНИМАНИЕ: Для этого дополнения требуется FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. ВНИМАНИЕ: Это дополнение в настоящее время установлено, но отключено. Используйте кнопку 'включить' для повторного включения. - + This Addon will be enabled next time you restart FreeCAD. Это дополнение будет включено при перезапуске FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Это дополнение будет отключено при перезапуске FreeCAD. - + Success Успешно - + Branch change succeeded, please restart to use the new version. Ветка успешно изменена, пожалуйста, перезапустите для использования новой версии. - - Changed to git ref '{}' -- please restart to use Addon. - Изменено на git ref '{}' -- пожалуйста, перезапустите программу, чтобы использовать дополнение. - - - + Install Установить - + Uninstall Удалить - - Check for Update - Проверить наличие обновления - - - - Run Macro - Выполнить макрос - - - - Change Branch - Изменить ветку - - - + Enable Включить - + Disable Отключить - + + Check for update + Check for update + + + + Run + Запустить + + + + Change branch... + Change branch... + + + Return to package list Вернуться к списку пакетов @@ -1575,9 +1561,9 @@ installed addons will be checked for available updates Выберите файл значка для этого элемента содержимого + - {} is not a subdirectory of {} {} не является подкаталогом {} @@ -1593,6 +1579,7 @@ installed addons will be checked for available updates + Workbench Верстак @@ -1777,19 +1764,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Макрос, устанавливаемый вместе с Менеджером дополнений FreeCAD - + Run Indicates a macro that can be 'run' Запустить - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Не удаётся прочитать данные с GitHub: проверьте подключение к Интернету и настройки прокси и повторите попытку. @@ -1898,140 +1885,138 @@ installed addons will be checked for available updates Выберите файл значка для этого пакета - + Filter is valid Фильтр действителен - + Filter regular expression is invalid Регулярное выражение фильтра недопустимо - + + Search... + Поиск... + + + Click for details about package {} Щёлкните для подробностей о пакете {} - + Click for details about workbench {} Щёлкните для подробностей о верстаке {} - + Click for details about macro {} Щёлкните для подробностей о макросе {} - + Maintainers: Сопровождающие: - + Tags Теги - + updated обновлено - - + + Up-to-date Актуальная версия - - - + + + + + Update available Доступно обновление + - Pending restart В ожидании перезапуска - - + + DISABLED ОТКЛЮЧЕНО - + Installed version Установленная версия - + Unknown version Неизвестная версия - + Installed on Установлено - + Available version Доступная версия - - Show Addons containing: - Показать дополнения, содержащие: + + Filter by... + Filter by... - - All - Все + + Addon Type + Addon Type - - Workbenches - Верстаки - - - - Macros - Макрос - - - - Preference Packs - Пользовательские пакеты - - - - Status: - Состояние: - - - + + Any Любой - + + Macro + Макрос + + + + Preference Pack + Настройки Пакета + + + + Installation Status + Installation Status + + + Not installed Не установлено - + Filter Фильтр - - - OK - OK - DANGER: Developer feature @@ -2091,83 +2076,83 @@ installed addons will be checked for available updates Не удалось установить пакет {} - + Downloaded package.xml for {} Загружен package.xml для {} - + Failed to decode {} file for Addon '{}' Не удалось декодировать файл {} дополнения '{}' - + Any dependency information in this file will be ignored Любая информация о зависимостях в этом файле будет игнорироваться - + Downloaded metadata.txt for {} Загружен metadata.txt для {} - + Downloaded requirements.txt for {} Загружен requirements.txt для {} - + Downloaded icon for {} Загружен значок для {} - + Unable to open macro wiki page at {} Невозможно открыть страницу в вики макроса {} - + Unable to fetch the code of this macro. Не удаётся получить код макроса. - + Unable to retrieve a description from the wiki for macro {} Не удаётся загрузить описание с вики для макроса {} - + Unable to open macro code URL {} Не удаётся открыть URL кода макроса {} - + Unable to fetch macro-specified file {} from {} Не удалось загрузить файл {}, необходимый для макроса {} - + Could not locate macro-specified file {} (expected at {}) Не удалось найти макро-указанный файл {} (ожидалось в {}) - + {}: Unrecognized internal workbench '{}' {}: Нераспознанный внутренний верстак '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Предупреждение разработчика Дополнения: URL-адрес репозитория, заданный в файле package.xml для дополнения {} ({}), не соответствует URL-адресу, с которого он был получен ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Предупреждение разработчика Дополнения: ветка репозитория, указанная в файле package.xml для надстройки {} ({}), не соответствует ветке, из которой она была получена ({}) - - + + Got an error when trying to import {} Произошла ошибка при попытке импортировать {} @@ -2311,17 +2296,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Получение описания макроса... - + Retrieving info from git Получение информации из git - + Retrieving info from wiki Получение информации из вики @@ -2383,25 +2368,40 @@ installed addons will be checked for available updates некоторые дополнения были обновлены - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Менеджер дополнений - + Manage external workbenches, macros, and preference packs Управление внешними верстаками, макросами и наборами настроек @@ -2438,7 +2438,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Менеджер дополнений diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm index 851e9204c1..660fcb90f8 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index c84aa7ff7e..a2a9e32826 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikona - + <b>Package Name</b> <b>Naziv paketa</b> - + Version Različica - + Description Opis - + Update Available Na voljo je nadgradnja @@ -258,61 +258,6 @@ Ali želite, da jih upravljalinik dodatkov namesti samodejno? Izberite "Pre Addon Manager Upravljalnik dodatkov - - - Downloading info... - Prenašanje podatkov ... - - - - Stop the cache update - Zaustavi posodobitev predpomnilnika - - - - Refresh local cache - Osveži krajevni predpomnilnik - - - - Download and apply all available updates - Prenesi in uporabi vse razpoložljive posodobitve - - - - Update all Addons - Posodobi vse dodatke - - - - Check for updates - Preveri posodobitve - - - - View and update Python package dependencies - Poglej in posodobi odvisnosti Pythonovega paketa - - - - Python dependencies... - Pythonove odvisnosti ... - - - - Developer tools... - Orodja za razvijalce... - - - - Close the Addon Manager - Zapri upravljalnik dodatkov - - - - Close - Zapri - Edit Tags @@ -599,76 +544,91 @@ preveril razpoložljivost posodobitev za nameščene dodatke + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Skrij dodatke z oznako Le Python 2 - + Hide Addons marked Obsolete Skrij dodatke z oznako Zastarelo - + Hide Addons that require a newer version of FreeCAD Skrij dodatke, ki zahtevajo novejšo različico FreeCADa - + Custom repositories Skladišča po meri - + Proxy Posredniški strežnik - + No proxy Ni posredniškega strežnika - + User system proxy Posredniški strežnik uporabniškega okolja - + User-defined proxy: Posredniški strežnik, ki ga določi uporabnik: - + Path to git executable (optional): Pot do git izvršljive datoteke (možnostno): - + The path to the git executable. Autodetected if needed and not specified. Pot do git-ove izvršljive datoteke. Samodejno popravljanje, če je potrebno in ni določeno. - + Advanced Options Napredne možnosti - + Show option to change branches (requires git) Prikaži možnost spreminjanja veje (potreben git) - + Disable git (fall back to ZIP downloads only) Onemogoči git (vrnitev na prenos le ZIPa) - + Activate Addon Manager options intended for developers of new Addons. Omogoči možnosti upravljalnika dodatkov, ki so namenjene razvijalcem novih dodatkov. - + Addon developer mode Razvijalski način dodatkov @@ -1141,17 +1101,17 @@ preveril razpoložljivost posodobitev za nameščene dodatke AddonsInstaller - + Starting up... Pričenjanje ... - + Loading addon information Nalaganje podatkov o dodatku - + Worker process {} is taking a long time to stop... Delovni proces {} se predolgo zaustavlja ... @@ -1170,84 +1130,115 @@ preveril razpoložljivost posodobitev za nameščene dodatke - + Addon manager Upravljalnik dodatkov - + You must restart FreeCAD for changes to take effect. Da bi spremembe stopile v veljavo, morate ponovno zagnati FreeCAD. - + Restart now Takojšnji pozagon - + Restart later Pozaženi pozneje - - + + Refresh local cache Osveži krajevni predpomnilnik - + Updating cache... Posodabljanje predpomnilnika ... - + Could not find addon '{}' to select Dodatka '{}' za označitev ni mogoče najti - - + + Checking for updates... Preverjanje za posodobitve … - - Apply {} update(s) - Uporabi {} posodobitve + + + Close + Zapri - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Na voljo ni novih posodobitev - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Novega namestilnika ni mogoče zagnati, dokler se prejšnji ne konča. - + Execution of macro failed. See console for failure details. Izvedba makra spodletela. Podrobnosti o napaki si poglejte na ukazni mizi. - - + + Maintainer Vzdrževalec - - + + Author Ustvarjalec @@ -1268,7 +1259,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke - + Update Posodobi @@ -1283,27 +1274,27 @@ preveril razpoložljivost posodobitev za nameščene dodatke QtNetwork-a ni mogoče uvoziti - kaže, da ni nameščen na vašem sistemu. Morda ima vaš ponudnik paket za to odvisnost (pogosto imenovan "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Pretvarjanje izbranih vrat posredniškega strežnika '{}' v številko vrat je spodletela - + Parameter error: mutually exclusive proxy options set. Resetting to default. Napaka določilke: nastavljene medsebojno izključuječe možnosti posredniškega strežnika. Ponastavljanje na privzeto. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Napaka določilke: posredniški strežnik nakazan, vendar ni na voljo. Ponastavljanje na privzeto. - + Addon Manager: Unexpected {} response from server Upravljalnik dodatkov: Nepričakovan {} odziv strežnika - + Error with encrypted connection Napaka kodirane povezave @@ -1344,162 +1335,157 @@ preveril razpoložljivost posodobitev za nameščene dodatke Odmestitev spodletela - + Version {version} installed on {date} Različica {version} nameščena {date} - + Version {version} installed Različica {version} nameščena - + Installed on {date} Nameščeno {date} - - - - + + + + Installed Nameščeno - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Samodejno preverjanje posodobitev onemogočeno - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Namesti - + Uninstall Odmesti - - Check for Update - Check for Update - - - - Run Macro - Zaženi makro - - - - Change Branch - Spremeni vejo - - - + Enable Omogoči - + Disable Onemogoči - + + Check for update + Check for update + + + + Run + Zaženi (postopek), + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ preveril razpoložljivost posodobitev za nameščene dodatke Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke + Workbench Delovno okolje @@ -1779,19 +1766,19 @@ preveril razpoložljivost posodobitev za nameščene dodatke - + A macro installed with the FreeCAD Addon Manager Makro nameščen s FreeCAD-ovim Upravljalnikom dodatkov - + Run Indicates a macro that can be 'run' Zaženi - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Podatkov na GitHubu ni mogoče brati: preverite spletno povezavo in nastavitve posredniškega strežnika ter poskusite ponovno. @@ -1900,140 +1887,138 @@ preveril razpoložljivost posodobitev za nameščene dodatke Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Iskanje ... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Značke - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Nameščena različica - + Unknown version Unknown version - + Installed on Installed on - + Available version Razpoložljiva različica - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Vse + + Addon Type + Addon Type - - Workbenches - Delovna okolja - - - - Macros - Makri - - - - Preference Packs - Preference Packs - - - - Status: - Stanje: - - - + + Any Po želji - + + Macro + Makro + + + + Preference Pack + Prednastavitveni sveženj + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Sito - - - OK - Potrdi - DANGER: Developer feature @@ -2093,83 +2078,83 @@ preveril razpoložljivost posodobitev za nameščene dodatke Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ preveril razpoložljivost posodobitev za nameščene dodatke - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ preveril razpoložljivost posodobitev za nameščene dodatke nekateri dodatki so bili lahko posodobljeni - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke QObject - + Addon Manager Upravljalnik dodatkov diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.qm index ac056d417e..ed45168e1e 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts index f68a3bfaa2..37b94ab43a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr-CS.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikona - + <b>Package Name</b> <b>Ime paketa</b> - + Version Verzija - + Description Opis - + Update Available Dostupno jе ažuriranjе @@ -258,61 +258,6 @@ Da li želiš da ih Menadžer dodataka automatski instalira? Izaberi "Zanem Addon Manager Menadžer dodataka - - - Downloading info... - Preuzimanje informacija... - - - - Stop the cache update - Zaustavi ažuriranje keša - - - - Refresh local cache - Osveži lokalni keš - - - - Download and apply all available updates - Preuzmi i primeni sva dostupna ažuriranja - - - - Update all Addons - Ažuriraj sve Dodatke - - - - Check for updates - Proveri ažuriranja - - - - View and update Python package dependencies - Pregledaj i ažuriraj zavisnosti Python paketa - - - - Python dependencies... - Python zavisnosti... - - - - Developer tools... - Alati za programere... - - - - Close the Addon Manager - Zatvori Menadžer dodataka - - - - Close - Zatvori - Edit Tags @@ -599,76 +544,91 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Sakrij Dodatke sa oznakom "Samo Python 2" - + Hide Addons marked Obsolete Sakrij Dodatke označene kao zastareli - + Hide Addons that require a newer version of FreeCAD Sakrij Dodatke koji zahtevaju noviju verziju FreeCAD-a - + Custom repositories Sopstveno spremište - + Proxy Proksi - + No proxy Bez proksi - + User system proxy Korisnički sistemski proksi - + User-defined proxy: Korisnički proksi: - + Path to git executable (optional): Staza ka izvršnoj git datoteci (Neobavezno): - + The path to the git executable. Autodetected if needed and not specified. Putanja do git izvršne datoteke. Automatski se detektuje ako je potrebno a nije navedeno. - + Advanced Options Napredne opcije - + Show option to change branches (requires git) Prikaži opciju za promenu grana (zahteva GitPython) - + Disable git (fall back to ZIP downloads only) Onemogući git (vratite se samo na ZIP preuzimanja) - + Activate Addon Manager options intended for developers of new Addons. Aktiviraj opcije menadžera dodataka namenjene programerima novih dodataka. - + Addon developer mode Režim programera dodataka @@ -1141,17 +1101,17 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja AddonsInstaller - + Starting up... Pokreće se... - + Loading addon information Učitavanje informacijа o dodacima - + Worker process {} is taking a long time to stop... Radni proces {} se dugo zaustavlja... @@ -1170,84 +1130,115 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja - + Addon manager Menadžer dodataka - + You must restart FreeCAD for changes to take effect. Moraš ponovo pokrenuti FreeCAD da bi promene stupile na snagu. - + Restart now Ponovo pokreni sada - + Restart later Ponovo pokreni kasnije - - + + Refresh local cache Osveži lokalni keš - + Updating cache... Ažuriranje keša... - + Could not find addon '{}' to select Nije moguće pronaći Dodatak '{}' da bi izabrao - - + + Checking for updates... Proveravam da li postoje ažuriranja... - - Apply {} update(s) - Primeni {} ažuriranje(a) + + + Close + Zatvori - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Nema dostupnih ažuriranja - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Ne može se pokrenuti novi program za instalaciju dok se prethodni ne završi. - + Execution of macro failed. See console for failure details. Izvršavanje makroa nije uspelo. Pogledaj konzolu za detalje o greškama. - - + + Maintainer Programer zadužen za održavanje - - + + Author Autor @@ -1268,7 +1259,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja - + Update Ažuriranje @@ -1283,27 +1274,27 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Nije moguće uvesti QtNetwork -- izgleda da nije instaliran na tvom sistemu. Tvoj provajder možda ima paket za ovu zavisnost (često se na primer naziva, "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Konvertovanje navedenog proksi porta '{}' nije uspelo - + Parameter error: mutually exclusive proxy options set. Resetting to default. Greška u parametru: postavljene su međusobno isključive proksi opcije. Vraćanje na podrazumevane vrednosti. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Greška u parametru: korisnički proksi je naznačen, ali nije obezbeđen. Vraćanje na podrazumevane vrednosti. - + Addon Manager: Unexpected {} response from server Menadžer dodataka: Neočekivani {} odgovor od servera - + Error with encrypted connection Greška šifrovane veze @@ -1344,162 +1335,157 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Deinstaliranje nije uspelo - + Version {version} installed on {date} Dana {date} instalirana je verzija {version} - + Version {version} installed Instalirana je verzija {version} - + Installed on {date} Instalirano {date} - - - - + + + + Installed Instalirano - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - Na grani {} dostupno je ažuriranje za verziju - - - - Update available to version - Доступно је ажурирање за верзију - - - - An update is available - Dostupno je ažuriranje - - - + Git tag '{}' checked out, no updates possible Git oznaka '{}' checked out, ažuriranja nisu moguća - - This is the latest version available for branch {} - Ovo je najnovija verzija dostupna za granu {} - - - - Updated, please restart FreeCAD to use - Ažurirano, ponovo pokrenite FreeCAD da biste ga koristili - - - + Update check in progress U toku je provera ažuriranja - - Automatic update checks disabled - Automatske provere ažuriranja su onemogućene - - - + Installation location Lokacija instalacije - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Onemogućeno + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete UPOZORENJE: Ovaj dodatak je zastareo - - WARNING: This addon is Python 2 Only - UPOZORENJE: Ovaj dodatak je samo za Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - UPOZORENJE: Ovaj dodatak zahteva FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. UPOZORENJE: Ovaj dodatak je trenutno instaliran, ali je onemogućen. Koristi 'omogući' dugme da bi ponovo omogućio. - + This Addon will be enabled next time you restart FreeCAD. Ovaj Dodatak će biti omogućen sledeći put kada ponovo pokreneš FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Ovaj Dodatak će biti onemogućen sledeći put kada ponovo pokreneš FreeCAD. - + Success Uspešno - + Branch change succeeded, please restart to use the new version. Promena grane je uspela, ponovo pokreni da bi koristio novu verziju. - - Changed to git ref '{}' -- please restart to use Addon. - Promenjeno u git ref '{}' -- ponovo pokreni da bi koristio Dodatak. - - - + Install Instaliraj - + Uninstall Deinstaliraj - - Check for Update - Proveri ažuriranja - - - - Run Macro - Pokreni makro - - - - Change Branch - Promeni granu - - - + Enable Omogući - + Disable Onemogući - + + Check for update + Check for update + + + + Run + Run + + + + Change branch... + Change branch... + + + Return to package list Vrati se na listu paketa @@ -1577,9 +1563,9 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Izaberi datoteku ikone za ovu stavku sadržaja + - {} is not a subdirectory of {} {} nije podfascikla {} @@ -1595,6 +1581,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja + Workbench Radno okruženje @@ -1779,19 +1766,19 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja - + A macro installed with the FreeCAD Addon Manager Makro instaliran sa FreeCAD Menadžerom dodataka - + Run Indicates a macro that can be 'run' Pokreni - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Nije moguće pročitati podatke sa GitHub-a: proveri internet vezu i podešavanja proksija i pokušaj ponovo. @@ -1900,140 +1887,138 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Izaberi datoteku ikone za ovaj paket - + Filter is valid Filter je važeći - + Filter regular expression is invalid Regularni izraz filtra je nevažeći - + + Search... + Pretraži... + + + Click for details about package {} Klikni za detalje o paketu {} - + Click for details about workbench {} Klikni za detalje o radnom okruženju {} - + Click for details about macro {} Klikni za detalje o makro-u {} - + Maintainers: Programeri zaduženi za održavanje: - + Tags Oznake - + updated ažurirano - - + + Up-to-date Ažurirano - - - + + + + + Update available Dostupno jе ažuriranjе + - Pending restart Ponovno pokretanje na čekanju - - + + DISABLED ONEMOGUĆENO - + Installed version Instalirana verzija - + Unknown version Nepoznata verzija - + Installed on Instaliran na - + Available version Dostupna verzija - - Show Addons containing: - Prikaži Dodatke koji sadrže: + + Filter by... + Filter by... - - All - Sva + + Addon Type + Addon Type - - Workbenches - Radna okruženja - - - - Macros - Makro-i - - - - Preference Packs - Paketi podešavanja - - - - Status: - Status: - - - + + Any Bilo koji - + + Macro + Makro + + + + Preference Pack + Paket podešavanja + + + + Installation Status + Installation Status + + + Not installed Nije instalirano - + Filter Filter - - - OK - U redu - DANGER: Developer feature @@ -2093,83 +2078,83 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja Instalacija Dodatka {} nije uspela - + Downloaded package.xml for {} Preuzet package.xml za {} - + Failed to decode {} file for Addon '{}' Dekodiranje {} datoteke za Dodatak '{}' nije uspelo - + Any dependency information in this file will be ignored Sve informacije u ovoj datoteci o zavisnosti će biti zanemarene - + Downloaded metadata.txt for {} Preuzet metadata.txt za {} - + Downloaded requirements.txt for {} Preuzet requirements.txt za {} - + Downloaded icon for {} Preuzeta ikona za {} - + Unable to open macro wiki page at {} Nije moguće otvoriti makro wiki stranicu na {} - + Unable to fetch the code of this macro. Nije moguće preuzeti kod ovog makroa. - + Unable to retrieve a description from the wiki for macro {} Nije moguće preuzeti opis sa wiki-ja za makro {} - + Unable to open macro code URL {} Nije moguće otvoriti URL adresu koda makro-a {} - + Unable to fetch macro-specified file {} from {} Nije moguće preuzeti datoteku {} navedenu makroom iz {} - + Could not locate macro-specified file {} (expected at {}) Nije moguće locirati datoteku navedenu makro-om {} (trebala je biti u {}) - + {}: Unrecognized internal workbench '{}' {}: Neprepoznato unutrašnje radno okruženje '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Upozorenje za programere dodataka: URL adresa spremišta zadata u package.xml datoteci za dodatak {} ({}) ne odgovara URL adresi sa koje je preuzet ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Upozorenje za programere dodataka: Grana spremišta postavljena u package.xml datoteci za dodatak {} ({}) se ne podudara sa granom iz koje je preuzeta ({}) - - + + Got an error when trying to import {} Greška pri pokušaju uvoza {} @@ -2313,17 +2298,17 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja - + Retrieving macro description... Preuzimanje opisa makro-a... - + Retrieving info from git Preuzimanje informacija sa git-a - + Retrieving info from wiki Preuzimanje informacija sa wiki-a @@ -2385,25 +2370,40 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja neki dodaci su možda ažurirani - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Menadžer dodataka - + Manage external workbenches, macros, and preference packs Upravljaj spoljnim radnim okruženjima, makro-ima i paketima podešavanja @@ -2440,7 +2440,7 @@ instalirani dodaci će biti provereni da li postoje dostupna ažuriranja QObject - + Addon Manager Menadžer dodataka diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm index 74114706bd..cdb3707275 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index 3563f66ec1..47ad65a2c3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -22,31 +22,31 @@ CompactView - + Icon Икона - + <b>Package Name</b> <b>Име пакета</b> - + Version Верзија - + Description Опис - + Update Available Доступно је ажурирање @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Менаџер додатака - - - Downloading info... - Преузимање информација... - - - - Stop the cache update - Заустави ажурирање кеша - - - - Refresh local cache - Освежи локални кеш - - - - Download and apply all available updates - Преузми и примени сва доступна ажурирања - - - - Update all Addons - Ажурирај све Додатке - - - - Check for updates - Провери ажурирања - - - - View and update Python package dependencies - Прегледај и ажурирај зависности Python пакета - - - - Python dependencies... - Python зависности... - - - - Developer tools... - Алати за програмере... - - - - Close the Addon Manager - Затвори Менаџер додатака - - - - Close - Затвори - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Сакриј Додатке са ознаком "Само Python 2" - + Hide Addons marked Obsolete Сакриј Додатке означене као застарели - + Hide Addons that require a newer version of FreeCAD Сакриј Додатке који захтевају новију верзију FreeCAD-а - + Custom repositories Сопствено спремиште - + Proxy Прокси, Посреднички сервер - + No proxy Без прокси - + User system proxy Кориснички системски прокси - + User-defined proxy: Кориснички прокси: - + Path to git executable (optional): Стаза ка извршној git датотеци (необавезно): - + The path to the git executable. Autodetected if needed and not specified. Путања до git извршне датотеке. Аутоматски се детектује ако је потребно а није наведено. - + Advanced Options Напредне опције - + Show option to change branches (requires git) Прикажи опцију за промену грана (захтева GitPython) - + Disable git (fall back to ZIP downloads only) Онемогући git (вратите се само на ZIP преузимања) - + Activate Addon Manager options intended for developers of new Addons. Активирај опције Менаџера додатака намењене програмерима нових додатака. - + Addon developer mode Режим програмера додатака @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Покреће се... - + Loading addon information Учитавање информација о додацима - + Worker process {} is taking a long time to stop... Радни процес {} се дуго зауставља... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Менаџер додатака - + You must restart FreeCAD for changes to take effect. Мораш поново покренути FreeCAD да би промене ступиле на снагу. - + Restart now Поново покрени сада - + Restart later Поново покрени касније - - + + Refresh local cache Освежи локални кеш - + Updating cache... Ажурирање кеша... - + Could not find addon '{}' to select Није могуће пронаћи Додатак '{}' да би изабрао - - + + Checking for updates... Проверавам да ли постоје ажурирања... - - Apply {} update(s) - Примени {} ажурирање(а) + + + Close + Затвори - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Нема доступних ажурирања - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Не може се покренути нови програм за инсталацију док се претходни не заврши. - + Execution of macro failed. See console for failure details. Извршавање макроа није успело. Погледај конзолу за детаље о грешкама. - - + + Maintainer Програмер задужен за одржавање - - + + Author Аутор @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Ажурирање @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Није могуће увести QtNetwork -- изгледа да није инсталиран твом на систему. Твој провајдер можда има пакет за ову зависност (често се на пример назива, "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Конвертовање наведеног прокси порта '{}' није успело - + Parameter error: mutually exclusive proxy options set. Resetting to default. Грешка у параметру: постављене су међусобно искључиве прокси опције. Враћање на подразумеване вредности. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Грешка у параметру: кориснички прокси је назначен, али није обезбеђен. Враћање на подразумеване вредности. - + Addon Manager: Unexpected {} response from server Менаџер додатака: Неочекивани {} одговор од сервера - + Error with encrypted connection Грешка шифроване везе @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Деинсталирање није успело - + Version {version} installed on {date} Дана {date} инсталирана је верзија {version} - + Version {version} installed Инсталирана је верзија {version} - + Installed on {date} Инсталирано {date} - - - - + + + + Installed Инсталирано - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - На грани {} доступно је ажурирање за верзију - - - - Update available to version - Доступно је ажурирање за верзију - - - - An update is available - Доступно је ажурирање - - - + Git tag '{}' checked out, no updates possible Git ознака '{}' checked out, ажурирања нису могућа - - This is the latest version available for branch {} - Ово је најновија верзија доступна за грану {} - - - - Updated, please restart FreeCAD to use - Ажурирано, поново покрените FreeCAD да бисте га користили - - - + Update check in progress У току је провера ажурирања - - Automatic update checks disabled - Аутоматске провере ажурирања су онемогућене - - - + Installation location Локација инсталације - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Онемогућено + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete УПОЗОРЕЊЕ: Овај додатак је застарео - - WARNING: This addon is Python 2 Only - УПОЗОРЕЊЕ: Овај додатак је само за Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - УПОЗОРЕЊЕ: Овај додатак захтева FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. УПОЗОРЕЊЕ: Овај додатак је тренутно инсталиран, али онемогућен. Користи 'омогући' дугме да би поново омогућио. - + This Addon will be enabled next time you restart FreeCAD. Овај Додатак ће бити омогућен следећи пут када поново покренеш FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. Овај Додатак ће бити онемогућен следећи пут када поново покренеш FreeCAD. - + Success Успешно - + Branch change succeeded, please restart to use the new version. Промена гране је успела, поново покрени да би користио нову верзију. - - Changed to git ref '{}' -- please restart to use Addon. - Промењено у git ref '{}' -- поново покрени да би користио Додатак. - - - + Install Инсталирај - + Uninstall Деинсталирај - - Check for Update - Провери ажурирања - - - - Run Macro - Покрени макро - - - - Change Branch - Промени грану - - - + Enable Омогући - + Disable Онемогући - + + Check for update + Check for update + + + + Run + Покрени + + + + Change branch... + Change branch... + + + Return to package list Врати се на листу пакета @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Изабери датотеку иконе за ову ставку садржаја + - {} is not a subdirectory of {} {} није подфасцикла {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Радно окружење @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Макро инсталиран са FreeCAD Менаџером додатака - + Run Indicates a macro that can be 'run' Покрени - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Није могуће прочитати податке са GitHub-а: провери интернет везу и подешавања проксија и покушај поново. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Изабери датотеку иконе за овај пакет - + Filter is valid Филтер је важећи - + Filter regular expression is invalid Регуларни израз филтра је неважећи - + + Search... + Претрага... + + + Click for details about package {} Кликни за детаље о пакету {} - + Click for details about workbench {} Кликни за детаље о радном окружењу {} - + Click for details about macro {} Кликни за детаље о макро-у {} - + Maintainers: Програмери задужени за одржавање: - + Tags Ознаке - + updated ажурирано - - + + Up-to-date Ажурирано - - - + + + + + Update available Доступно је ажурирање + - Pending restart Поновно покретање на чекању - - + + DISABLED ОНЕМОГУЋЕНО - + Installed version Инсталирана верзија - + Unknown version Непозната верзија - + Installed on Инсталиран на - + Available version Доступна верзија - - Show Addons containing: - Прикажи Додатке који садрже: + + Filter by... + Filter by... - - All - Сва + + Addon Type + Addon Type - - Workbenches - Радна окружења - - - - Macros - Макро-и - - - - Preference Packs - Пакети подешавања - - - - Status: - Статус: - - - + + Any Било који - + + Macro + Макро + + + + Preference Pack + Пакет подешавања + + + + Installation Status + Installation Status + + + Not installed Није инсталирано - + Filter Филтер - - - OK - У реду - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Инсталација Додатка {} није успела - + Downloaded package.xml for {} Преузет package.xml за {} - + Failed to decode {} file for Addon '{}' Декодирање {} датотеке за Додатак '{}' није успело - + Any dependency information in this file will be ignored Све информације у овој датотеци о зависности ће бити занемарене - + Downloaded metadata.txt for {} Преузет metadata.txt за {} - + Downloaded requirements.txt for {} Преузет requirements.txt за {} - + Downloaded icon for {} Преузета икона за {} - + Unable to open macro wiki page at {} Није могуће отворити макро wiki страницу на {} - + Unable to fetch the code of this macro. Није могуће преузети код овог макроа. - + Unable to retrieve a description from the wiki for macro {} Није могуће преузети опис са wiki-ја за макро {} - + Unable to open macro code URL {} Није могуће отворити URL адресу кода макроа {} - + Unable to fetch macro-specified file {} from {} Није могуће преузети датотеку {} наведену макроом из {} - + Could not locate macro-specified file {} (expected at {}) Није могуће лоцирати датотеку наведену макро-ом {} (требала је бити у {}) - + {}: Unrecognized internal workbench '{}' {}: Непрепознато унутрашње радно окружење '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Упозорење за програмере додатака: URL адреса спремишта задата у package.xml датотеци за додатак {} ({}) не одговара URL адреси са које је преузет ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Упозорење за програмере додатака: Грана спремишта постављена у package.xml датотеци за додатак {} ({}) се не подудара са граном из које је преузета ({}) - - + + Got an error when trying to import {} Грешка при покушају увоза {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Преузимање описа макро-а... - + Retrieving info from git Преузимање информација са git-а - + Retrieving info from wiki Преузимање информација са wiki-ја @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates неки додаци су можда ажурирани - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Менаџер додатака - + Manage external workbenches, macros, and preference packs Управљај спољним радним окружењима, макро-има и пакетима подешавања @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Менаџер додатака diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm index ae8aec749d..3e2b53d34f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index f9529e77af..bce118f9e9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -22,31 +22,31 @@ CompactView - + Icon Ikon - + <b>Package Name</b> <b>Package Name</b> - + Version Version - + Description Beskrivning - + Update Available Uppdatering tillgänglig @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Tilläggshanterare - - - Downloading info... - Laddar ned information... - - - - Stop the cache update - Stoppa cache-uppdateringen - - - - Refresh local cache - Uppdatera lokal cache - - - - Download and apply all available updates - Ladda ned och installera alla tillgängliga uppdateringar - - - - Update all Addons - Uppdatera alla tillägg - - - - Check for updates - Sök efter uppdateringar - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Pythonberoenden... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Stäng Addon-hanteraren - - - - Close - Stäng - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy Ingen proxy - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Avancerade alternativ - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Startar upp... - + Loading addon information Laddar tilläggsinformation - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Tilläggshanterare - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Starta om nu - + Restart later Starta om senare - - + + Refresh local cache Uppdatera lokal cache - + Updating cache... Uppdaterar cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Söker efter uppdateringar... - - Apply {} update(s) - Apply {} update(s) + + + Close + Stäng - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available Inga uppdateringar tillgängliga - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author Upphovsman @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Uppdatera @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Avinstallation misslyckades - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installerad den {date} - - - - + + + + Installed Installerad - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Uppdatering tillgänglig till version - - - - An update is available - En uppdatering är tillgänglig - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installationsplats - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Inaktiverad + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Installera - + Uninstall Avinstallera - - Check for Update - Sök efter uppdateringar - - - - Run Macro - Kör makro - - - - Change Branch - Ändra gren - - - + Enable Aktivera - + Disable Avaktivera - + + Check for update + Check for update + + + + Run + Kör + + + + Change branch... + Change branch... + + + Return to package list Tillbaka till paketlistan @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Arbetsbänk @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager Ett makro installerat med FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Kör - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Välj en ikonfil för detta paket - + Filter is valid Filtret är giltigt - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Sök... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Taggar - + updated uppdaterad - - + + Up-to-date Up-to-date - - - + + + + + Update available Uppdatering tillgänglig + - Pending restart Väntande omstart - - + + DISABLED INAKTIVERAD - + Installed version Installerad version - + Unknown version Okänd version - + Installed on Installerad den - + Available version Tillgänglig version - - Show Addons containing: - Visa tillägg som innehåller: + + Filter by... + Filter by... - - All - Alla + + Addon Type + Addon Type - - Workbenches - Arbetsbänkar - - - - Macros - Makron - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Vilken som - + + Macro + Makro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Inte installerad - + Filter Filter - - - OK - OK - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Kan inte hämta koden för detta makro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Hämtar makrobeskrivning... - + Retrieving info from git Hämtar information från git - + Retrieving info from wiki Hämtar information från wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates vissa tillägg kan ha uppdaterats - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Tilläggshanterare diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm index ba754fb1e7..13b9cb9ba7 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index e3ad36e660..3e112c8121 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -22,31 +22,31 @@ CompactView - + Icon Simge - + <b>Package Name</b> <b>Paket Adı</b> - + Version Sürüm - + Description Açıklama - + Update Available Update Available @@ -258,61 +258,6 @@ Eklenti Yöneticisinin bunları otomatik olarak kurmasını istiyor musunuz? Ekl Addon Manager Eklenti Yöneticisi - - - Downloading info... - Bilgi indiriliyor... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Yerel önbelleği yenile - - - - Download and apply all available updates - Tüm geçerli güncellemeleri yükle ve uygula - - - - Update all Addons - Tüm Eklentileri Güncelle - - - - Check for updates - Güncellemeleri denetle - - - - View and update Python package dependencies - Python paketi bağımlılıklarını görüntüleyin ve güncelleyin - - - - Python dependencies... - Python bağımlılıkları... - - - - Developer tools... - Geliştirici araçları... - - - - Close the Addon Manager - Eklenti Yöneticisi' ni kapat - - - - Close - Kapat - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Özel depolar - + Proxy Vekil Sunucu - + No proxy Vekil sunucu yok - + User system proxy User system proxy - + User-defined proxy: Kullanıcı tanımlı vekil sunucu: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Gelişmiş seçenekler - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Eklenti geliştirici modu @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Başlatılıyor... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Yerel önbelleği yenile - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Kapat - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Geliştirici - - + + Author Yazar @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Güncelle @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Yükle - + Uninstall Kaldır - - Check for Update - Check for Update - - - - Run Macro - Makro Çalıştır - - - - Change Branch - Branch Değiştir - - - + Enable Etkinleştir - + Disable Devre dışı - + + Check for update + Check for update + + + + Run + Çalıştırmak + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Tezgah @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Çalıştırmak - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Ara... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Etiketler - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Kurulu sürüm - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Hepsi + + Addon Type + Addon Type - - Workbenches - Tezgah - - - - Macros - Makrolar - - - - Preference Packs - Preference Packs - - - - Status: - Durum: - - - + + Any Herhangi biri - + + Macro + Makro + + + + Preference Pack + Ön tanımlar paketi + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtre - - - OK - Tamam - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Eklenti Yöneticisi diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm index 292fdb2167..5f371ff8b4 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index 508c18c763..eef1716459 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -22,31 +22,31 @@ CompactView - + Icon Піктограма - + <b>Package Name</b> <b>Назва Додатку</b> - + Version Версія - + Description Опис - + Update Available Update Available @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Менеджер додатків - - - Downloading info... - Прогрес завантаження... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Оновити локальний кеш - - - - Download and apply all available updates - Завантажити та застосувати всі наявні оновлення - - - - Update all Addons - Оновити всі Додатки - - - - Check for updates - Перевірити оновлення - - - - View and update Python package dependencies - Перегляд та оновлення залежностей пакетів Python - - - - Python dependencies... - Python залежності... - - - - Developer tools... - Інструменти розробника... - - - - Close the Addon Manager - Закрити Менеджер Додатків - - - - Close - Закрити - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Приховати Додатки для Python 2 - + Hide Addons marked Obsolete Приховати застарілі Додатки - + Hide Addons that require a newer version of FreeCAD Приховати додатки для новіших версій FreeCAD - + Custom repositories Власні репозиторії - + Proxy Проксі - + No proxy Без проксі-сервера - + User system proxy Використовувати системний - + User-defined proxy: Заданий користувачем: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Додаткові Опції - + Show option to change branches (requires git) Показати можливість зміни гілок (вимагає git) - + Disable git (fall back to ZIP downloads only) Відключити git (повернутися до завантаження тільки ZIP) - + Activate Addon Manager options intended for developers of new Addons. Активувати опції Менеджеру Додатків, призначені для розробників нових Додатків. - + Addon developer mode Режим розробника додатків @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Оновити локальний кеш - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Закрити - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Розробник - - + + Author Автор @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Оновити @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Вимкнено + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Встановити - + Uninstall Видалити - - Check for Update - Check for Update - - - - Run Macro - Запустити Макрос - - - - Change Branch - Змінити гілку - - - + Enable Ввімкнути - + Disable Вимкнути - + + Check for update + Check for update + + + + Run + Запустити + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Робочі середовища @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' Запустити - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Шукати... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Мітки - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Встановлена версія - + Unknown version Unknown version - + Installed on Installed on - + Available version Доступна версія - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Всі + + Addon Type + Addon Type - - Workbenches - Робочі середовища - - - - Macros - Макроси - - - - Preference Packs - Preference Packs - - - - Status: - Стан: - - - + + Any Будь-який - + + Macro + Макрос + + + + Preference Pack + Набір Налаштувань + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Фільтр - - - OK - Підтвердити - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates деякі додатки можуть бути оновлені - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Менеджер додатків diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm index dd7b05f231..f6d751373f 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 8fbc8aa046..5f15e63528 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -22,31 +22,31 @@ CompactView - + Icon Icona - + <b>Package Name</b> <b>Package Name</b> - + Version Versió - + Description Descripció - + Update Available Update Available @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager Addon Manager - - - Downloading info... - S'està baixant la informació... - - - - Stop the cache update - Stop the cache update - - - - Refresh local cache - Refresh local cache - - - - Download and apply all available updates - Baixa i aplica totes les actualitzacions disponibles - - - - Update all Addons - Update all Addons - - - - Check for updates - Check for updates - - - - View and update Python package dependencies - View and update Python package dependencies - - - - Python dependencies... - Python dependencies... - - - - Developer tools... - Developer tools... - - - - Close the Addon Manager - Close the Addon Manager - - - - Close - Tanca - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only Hide Addons marked Python 2 Only - + Hide Addons marked Obsolete Hide Addons marked Obsolete - + Hide Addons that require a newer version of FreeCAD Hide Addons that require a newer version of FreeCAD - + Custom repositories Custom repositories - + Proxy Proxy - + No proxy Sense servidor intermediari - + User system proxy User system proxy - + User-defined proxy: User-defined proxy: - + Path to git executable (optional): Path to git executable (optional): - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options Advanced Options - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) Disable git (fall back to ZIP downloads only) - + Activate Addon Manager options intended for developers of new Addons. Activate Addon Manager options intended for developers of new Addons. - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... Starting up... - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now Restart now - + Restart later Restart later - - + + Refresh local cache Refresh local cache - + Updating cache... Updating cache... - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... Checking for updates... - - Apply {} update(s) - Apply {} update(s) + + + Close + Tanca - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer Maintainer - - + + Author Autor @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update Actualitza @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates Uninstall failed - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} Installed on {date} - - - - + + + + Installed Installed - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location Installation location - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + Disabled + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install Install - + Uninstall Uninstall - - Check for Update - Check for Update - - - - Run Macro - Run Macro - - - - Change Branch - Change Branch - - - + Enable Habilita - + Disable Desactiva - + + Check for update + Check for update + + + + Run + executa + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench Banc de treball @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' executa - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + Busca... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: Maintainers: - + Tags Tags - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available Update available + - Pending restart Pending restart - - + + DISABLED DISABLED - + Installed version Installed version - + Unknown version Unknown version - + Installed on Installed on - + Available version Available version - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - Tot + + Addon Type + Addon Type - - Workbenches - Bancs de treball - - - - Macros - Macros - - - - Preference Packs - Preference Packs - - - - Status: - Status: - - - + + Any Qualsevol - + + Macro + Macro + + + + Preference Pack + Preference Pack + + + + Installation Status + Installation Status + + + Not installed Not installed - + Filter Filtre - - - OK - D'acord - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates some addons may have been updated - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &Addon manager - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager Addon Manager diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm index 0840b8e6fc..d97af15d8b 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index 572cf7c33b..7912c4e715 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -22,31 +22,31 @@ CompactView - + Icon 图标 - + <b>Package Name</b> <b>软件包名称</b> - + Version 版本 - + Description 描述 - + Update Available 更新可用 @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager 插件管理器 - - - Downloading info... - 正在下载信息... - - - - Stop the cache update - 停止缓存更新 - - - - Refresh local cache - 刷新本地缓存 - - - - Download and apply all available updates - 下载和应用所有可用的更新 - - - - Update all Addons - 更新所有插件 - - - - Check for updates - 检查更新 - - - - View and update Python package dependencies - 查看和更新Python软件包依赖关系 - - - - Python dependencies... - Python 依赖... - - - - Developer tools... - 开发者工具... - - - - Close the Addon Manager - 关闭插件管理器 - - - - Close - 关闭 - Edit Tags @@ -599,76 +544,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only 隐藏标记为 Python 2 的插件 - + Hide Addons marked Obsolete 隐藏标记过时的插件 - + Hide Addons that require a newer version of FreeCAD 隐藏需要更新版本的 FreeCAD 的插件 - + Custom repositories Custom repositories - + Proxy 代理 - + No proxy 无代理 - + User system proxy 使用系统代理 - + User-defined proxy: 使用默认代理： - + Path to git executable (optional): git 可执行文件路径(可选)： - + The path to the git executable. Autodetected if needed and not specified. The path to the git executable. Autodetected if needed and not specified. - + Advanced Options 高级选项 - + Show option to change branches (requires git) Show option to change branches (requires git) - + Disable git (fall back to ZIP downloads only) 禁用 git (退回仅 ZIP 下载) - + Activate Addon Manager options intended for developers of new Addons. 激活为新附加组件开发者设计的附加组件管理器选项。 - + Addon developer mode Addon developer mode @@ -1141,17 +1101,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... 正在启动… - + Loading addon information Loading addon information - + Worker process {} is taking a long time to stop... Worker process {} is taking a long time to stop... @@ -1170,84 +1130,115 @@ installed addons will be checked for available updates - + Addon manager Addon manager - + You must restart FreeCAD for changes to take effect. You must restart FreeCAD for changes to take effect. - + Restart now 立即重启 - + Restart later 稍后重启 - - + + Refresh local cache 刷新本地缓存 - + Updating cache... 正在更新缓存… - + Could not find addon '{}' to select Could not find addon '{}' to select - - + + Checking for updates... 正在检查更新… - - Apply {} update(s) - Apply {} update(s) + + + Close + 关闭 - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available No updates available - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. Cannot launch a new installer until the previous one has finished. - + Execution of macro failed. See console for failure details. Execution of macro failed. See console for failure details. - - + + Maintainer 维护者 - - + + Author 作者 @@ -1268,7 +1259,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1283,27 +1274,27 @@ installed addons will be checked for available updates Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called "python3-pyside2.qtnetwork") - + Failed to convert the specified proxy port '{}' to a port number Failed to convert the specified proxy port '{}' to a port number - + Parameter error: mutually exclusive proxy options set. Resetting to default. Parameter error: mutually exclusive proxy options set. Resetting to default. - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. Parameter error: user proxy indicated, but no proxy provided. Resetting to default. - + Addon Manager: Unexpected {} response from server Addon Manager: Unexpected {} response from server - + Error with encrypted connection Error with encrypted connection @@ -1344,162 +1335,157 @@ installed addons will be checked for available updates 卸载失败 - + Version {version} installed on {date} Version {version} installed on {date} - + Version {version} installed Version {version} installed - + Installed on {date} 安装于{date} - - - - + + + + Installed 已安装 - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - On branch {}, update available to version - - - - Update available to version - Update available to version - - - - An update is available - An update is available - - - + Git tag '{}' checked out, no updates possible Git tag '{}' checked out, no updates possible - - This is the latest version available for branch {} - This is the latest version available for branch {} - - - - Updated, please restart FreeCAD to use - Updated, please restart FreeCAD to use - - - + Update check in progress Update check in progress - - Automatic update checks disabled - Automatic update checks disabled - - - + Installation location 安装位置 - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + 禁用 + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete WARNING: This addon is obsolete - - WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - + This Addon will be enabled next time you restart FreeCAD. This Addon will be enabled next time you restart FreeCAD. - + This Addon will be disabled next time you restart FreeCAD. This Addon will be disabled next time you restart FreeCAD. - + Success Success - + Branch change succeeded, please restart to use the new version. Branch change succeeded, please restart to use the new version. - - Changed to git ref '{}' -- please restart to use Addon. - Changed to git ref '{}' -- please restart to use Addon. - - - + Install 安装 - + Uninstall 卸载 - - Check for Update - 检查更新 - - - - Run Macro - 运行宏 - - - - Change Branch - 更改分支 - - - + Enable 启用 - + Disable 禁用 - + + Check for update + Check for update + + + + Run + 运行 + + + + Change branch... + Change branch... + + + Return to package list Return to package list @@ -1577,9 +1563,9 @@ installed addons will be checked for available updates Select an icon file for this content item + - {} is not a subdirectory of {} {} is not a subdirectory of {} @@ -1595,6 +1581,7 @@ installed addons will be checked for available updates + Workbench 工作台 @@ -1779,19 +1766,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager A macro installed with the FreeCAD Addon Manager - + Run Indicates a macro that can be 'run' 运行 - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. Unable to read data from GitHub: check your internet connection and proxy settings and try again. @@ -1900,140 +1887,138 @@ installed addons will be checked for available updates Select an icon file for this package - + Filter is valid Filter is valid - + Filter regular expression is invalid Filter regular expression is invalid - + + Search... + 搜索... + + + Click for details about package {} Click for details about package {} - + Click for details about workbench {} Click for details about workbench {} - + Click for details about macro {} Click for details about macro {} - + Maintainers: 维护者： - + Tags 标签 - + updated updated - - + + Up-to-date Up-to-date - - - + + + + + Update available 有可用的更新 + - Pending restart 等待重启 - - + + DISABLED DISABLED - + Installed version 已安装的版本 - + Unknown version 未知版本 - + Installed on 安装于 - + Available version 可用版本 - - Show Addons containing: - Show Addons containing: + + Filter by... + Filter by... - - All - 全部 + + Addon Type + Addon Type - - Workbenches - 工作台 - - - - Macros - 宏 - - - - Preference Packs - 首选项配置包 - - - - Status: - 状态: - - - + + Any 任意 - + + Macro + 宏 + + + + Preference Pack + 首选项配置包 + + + + Installation Status + Installation Status + + + Not installed 未安装 - + Filter 筛选器 - - - OK - 确定 - DANGER: Developer feature @@ -2093,83 +2078,83 @@ installed addons will be checked for available updates Installation of Addon {} failed - + Downloaded package.xml for {} Downloaded package.xml for {} - + Failed to decode {} file for Addon '{}' Failed to decode {} file for Addon '{}' - + Any dependency information in this file will be ignored Any dependency information in this file will be ignored - + Downloaded metadata.txt for {} Downloaded metadata.txt for {} - + Downloaded requirements.txt for {} Downloaded requirements.txt for {} - + Downloaded icon for {} Downloaded icon for {} - + Unable to open macro wiki page at {} Unable to open macro wiki page at {} - + Unable to fetch the code of this macro. Unable to fetch the code of this macro. - + Unable to retrieve a description from the wiki for macro {} Unable to retrieve a description from the wiki for macro {} - + Unable to open macro code URL {} Unable to open macro code URL {} - + Unable to fetch macro-specified file {} from {} Unable to fetch macro-specified file {} from {} - + Could not locate macro-specified file {} (expected at {}) Could not locate macro-specified file {} (expected at {}) - + {}: Unrecognized internal workbench '{}' {}: Unrecognized internal workbench '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - + + Got an error when trying to import {} Got an error when trying to import {} @@ -2313,17 +2298,17 @@ installed addons will be checked for available updates - + Retrieving macro description... Retrieving macro description... - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki @@ -2385,25 +2370,40 @@ installed addons will be checked for available updates 一些附加组件可能已更新 - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager 附加组件管理器 (&A) - + Manage external workbenches, macros, and preference packs Manage external workbenches, macros, and preference packs @@ -2440,7 +2440,7 @@ installed addons will be checked for available updates QObject - + Addon Manager 插件管理器 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm index f99373c0fd..94753d3faf 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index fc39987e7a..fe01324a14 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -22,31 +22,31 @@ CompactView - + Icon 圖示 - + <b>Package Name</b> <b>套件名稱</b> - + Version 版本 - + Description 說明 - + Update Available 有可用更新 @@ -258,61 +258,6 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Manager 附加元件管理器 - - - Downloading info... - 下載資訊... - - - - Stop the cache update - 停止更新快取 - - - - Refresh local cache - 刷新本地端快取 - - - - Download and apply all available updates - 下載並套用全部可用更新 - - - - Update all Addons - 更新所有附加元件 - - - - Check for updates - 檢查更新 - - - - View and update Python package dependencies - 查看並更新Python套件的依賴性 - - - - Python dependencies... - Python 相依性... - - - - Developer tools... - 開發者工具... - - - - Close the Addon Manager - 關閉附加元件管理器 - - - - Close - 關閉 - Edit Tags @@ -597,76 +542,91 @@ installed addons will be checked for available updates + Hide Addons without a license + Hide Addons without a license + + + + Hide Addons with non-FSF Free/Libre license + Hide Addons with non-FSF Free/Libre license + + + + Hide Addons with non-OSI-approved license + Hide Addons with non-OSI-approved license + + + Hide Addons marked Python 2 Only 隱藏標記只能使用於 Python 2 之附加元件 - + Hide Addons marked Obsolete 隱藏已標記為過時的附加元件 - + Hide Addons that require a newer version of FreeCAD 隱藏需要更新版本的 FreeCAD 的附加元件 - + Custom repositories 自訂儲存庫 - + Proxy 代理伺服器 - + No proxy 不使用代理伺服器 - + User system proxy 使用系統代理伺服器 - + User-defined proxy: 使用者定義的代理伺服器： - + Path to git executable (optional): git 可執行檔的路徑(選填): - + The path to the git executable. Autodetected if needed and not specified. git 可執行檔之路徑。如果需要且未指定，則會自動檢測。 - + Advanced Options 進階選項 - + Show option to change branches (requires git) 顯示更改分支的選項 (需要git) - + Disable git (fall back to ZIP downloads only) 停用 git (返回到僅使用 ZIP 下載) - + Activate Addon Manager options intended for developers of new Addons. 啟用針對新附加元件開發者設計的附加元件管理員選項。 - + Addon developer mode 附加元件開發者模式 @@ -1139,17 +1099,17 @@ installed addons will be checked for available updates AddonsInstaller - + Starting up... 啟動中... - + Loading addon information 載入附加元件資訊 - + Worker process {} is taking a long time to stop... 工作行程 {} 正在花費較長時間停止... @@ -1167,83 +1127,114 @@ installed addons will be checked for available updates - + Addon manager 附加元件管理器 - + You must restart FreeCAD for changes to take effect. 您必須重新啟動 FreeCAD 以使更改生效。 - + Restart now 現在重新啟動 - + Restart later 稍後重新啟動 - - + + Refresh local cache 刷新本地端快取 - + Updating cache... 更新快取... - + Could not find addon '{}' to select 無法找到附加元件'{}' 以選擇 - - + + Checking for updates... 檢查更新... - - Apply {} update(s) - 應用 {} 更新 + + + Close + 關閉 - + + Update all addons + Update all addons + + + + Check for updates + Check for updates + + + + Python dependencies... + Python dependencies... + + + + Developer tools... + Developer tools... + + + No updates available 沒有可用更新 - - - + + Apply 1 available update + Apply 1 available update + + + + Apply {} available updates + Apply {} available updates + + + + + Cannot launch a new installer until the previous one has finished. 在前一個安裝程式完成之前無法啟動新的安裝程式。 - + Execution of macro failed. See console for failure details. 執行巨集失敗。查看控制台以獲得失敗的細節。 - - + + Maintainer 維護者 - - + + Author 作者 @@ -1264,7 +1255,7 @@ installed addons will be checked for available updates - + Update 更新 @@ -1279,27 +1270,27 @@ installed addons will be checked for available updates 無法匯入 QtNetwork -- 該套件似乎未安裝在您的系統上。您的供應商可能提供了此相依性套件（通常被稱為 "python3-pyside2.qtnetwork"） - + Failed to convert the specified proxy port '{}' to a port number 無法將指定的代理伺服器埠 '{}' 轉換為埠的編號 - + Parameter error: mutually exclusive proxy options set. Resetting to default. 參數錯誤：設定互斥代理伺服器選項。重置為預設值。 - + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. 參數錯誤：指示使用者代理伺服器，但並未提供。重置為預設值。 - + Addon Manager: Unexpected {} response from server 附加元件管理員：從伺服器收到意外的 {} 回應 - + Error with encrypted connection 加密連線出現錯誤 @@ -1340,162 +1331,157 @@ installed addons will be checked for available updates 解除安裝失敗 - + Version {version} installed on {date} 版本 {version} 已於 {date} 安裝 - + Version {version} installed 版本 {version} 已安裝 - + Installed on {date} 安裝於 {date} - - - - + + + + Installed 己安裝 - + Currently on branch {}, name changed to {} Currently on branch {}, name changed to {} - - On branch {}, update available to version - 在分支 {} 上，可升級到版本 - - - - Update available to version - 有版本更新可供升級至版本 - - - - An update is available - 有更新版本 - - - + Git tag '{}' checked out, no updates possible 已檢查 Git 標籤 '{}'，無法進行更新 - - This is the latest version available for branch {} - 這是分支 {} 可用的最新版本 - - - - Updated, please restart FreeCAD to use - 已更新，請重新啟動 FreeCAD 以使用 - - - + Update check in progress 正在檢查更新 - - Automatic update checks disabled - 停用自動更新檢查 - - - + Installation location 安裝位置 - + + Changed to branch '{}' -- please restart to use Addon. + Changed to branch '{}' -- please restart to use Addon. + + + + This Addon has been updated. Restart FreeCAD to see changes. + This Addon has been updated. Restart FreeCAD to see changes. + + + + Disabled + 已停用 + + + + Currently on branch {}, update available to version {} + Currently on branch {}, update available to version {} + + + + Update available to version {} + Update available to version {} + + + + This is the latest version available + This is the latest version available + + + WARNING: This addon is obsolete 警告：此附加元件已過時 - - WARNING: This addon is Python 2 Only - 警告：此附加元件僅適用於 Python 2 + + WARNING: This addon is Python 2 only + WARNING: This addon is Python 2 only - - WARNING: This addon requires FreeCAD - 警告：此附加元件需要 FreeCAD + + WARNING: This addon requires FreeCAD {} + WARNING: This addon requires FreeCAD {} - + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. 警告：此附加元件目前已安裝，但是被停用。使用 '啟用' 按鈕以重新啟用。 - + This Addon will be enabled next time you restart FreeCAD. 此附加元件將會在您重新起動 FreeCAD 後啟用。 - + This Addon will be disabled next time you restart FreeCAD. 此附加元件將會在您重新起動 FreeCAD 後停用。 - + Success 成功 - + Branch change succeeded, please restart to use the new version. 分支更改成功，請重新啟動以使用此新版本。 - - Changed to git ref '{}' -- please restart to use Addon. - 更改為 git 參考 '{}' -- 請重新啟動以使用附加元件。 - - - + Install 安裝 - + Uninstall 解除安裝 - - Check for Update - 檢查更新 - - - - Run Macro - 執行巨集 - - - - Change Branch - 變更分支 - - - + Enable 啟用 - + Disable 停用 - + + Check for update + Check for update + + + + Run + 執行 + + + + Change branch... + Change branch... + + + Return to package list 返回套件列表 @@ -1573,9 +1559,9 @@ installed addons will be checked for available updates 選擇一個用於此內容項目的圖示檔案 + - {} is not a subdirectory of {} {} 不是 {} 的一個子目錄 @@ -1591,6 +1577,7 @@ installed addons will be checked for available updates + Workbench 工作台 @@ -1775,19 +1762,19 @@ installed addons will be checked for available updates - + A macro installed with the FreeCAD Addon Manager 使用 FreeCAD 附加元件管理器安裝的巨集 - + Run Indicates a macro that can be 'run' 執行 - + Unable to read data from GitHub: check your internet connection and proxy settings and try again. 無法自 GitHub 讀取資料：請檢查您的網路連線與代理伺服器設定並且再次嘗試。 @@ -1897,140 +1884,138 @@ installed addons will be checked for available updates 選擇一個用於此套件的圖示檔案 - + Filter is valid 過濾器有效 - + Filter regular expression is invalid 過濾器正規表示式無效 - + + Search... + 搜尋... + + + Click for details about package {} 點擊查看套件 {} 詳細資料 - + Click for details about workbench {} 點擊查看工作台 {} 詳細資料 - + Click for details about macro {} 點擊查看巨集 {} 詳細資料 - + Maintainers: 維護者： - + Tags 標籤 - + updated 已更新 - - + + Up-to-date 最新 - - - + + + + + Update available 有可用更新 + - Pending restart 等待重啟 - - + + DISABLED 已被停用 - + Installed version - + Unknown version 未知版本 - + Installed on 安裝在 - + Available version 可用版本 - - Show Addons containing: - 顯示包含以下內容的附加元件: + + Filter by... + Filter by... - - All - 所有 + + Addon Type + Addon Type - - Workbenches - 工作臺 - - - - Macros - 巨集 - - - - Preference Packs - 偏好設定包 - - - - Status: - 狀態: - - - + + Any 任何 - + + Macro + 巨集 + + + + Preference Pack + 偏好設定包 + + + + Installation Status + Installation Status + + + Not installed 未安裝 - + Filter 篩選器 - - - OK - 確定 - DANGER: Developer feature @@ -2090,83 +2075,83 @@ installed addons will be checked for available updates 安裝附加元件 {} 失敗 - + Downloaded package.xml for {} 下載 {} 的 package.xml 檔 - + Failed to decode {} file for Addon '{}' 解碼 Addon 的檔案 {} 失敗 '{}' - + Any dependency information in this file will be ignored 此檔案中的任何相依性資訊將會被忽略 - + Downloaded metadata.txt for {} 已下載 {} 的 metadata.txt - + Downloaded requirements.txt for {} 已下載 {} 的 requirements.txt - + Downloaded icon for {} 已下載 {} 的圖示 - + Unable to open macro wiki page at {} 無法打開巨集維基頁面 {} - + Unable to fetch the code of this macro. 無法取得這個巨集的程式碼。 - + Unable to retrieve a description from the wiki for macro {} 無法從維基獲取巨集 {} 的描述 - + Unable to open macro code URL {} 無法打開巨集程式碼的網址 {} - + Unable to fetch macro-specified file {} from {} 無法從 {} 擷取巨集指定的檔案 {} - + Could not locate macro-specified file {} (expected at {}) 無法找到巨集指定的檔案 {}（預期在 {}） - + {}: Unrecognized internal workbench '{}' {}：未識別的內部工作台 '{}' - + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) 附加元件開發者警告：給附加元件{} ({}) 之 package.xml 檔中的儲存庫網址集與截取自 ({}) 的網址不匹配 - + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) 附加元件開發者警告：給附加元件{} ({}) 之 package.xml 檔中的儲存庫分支集與截取自 ({}) 的分支不匹配 - - + + Got an error when trying to import {} 當試著匯入 {} 時發生錯誤 @@ -2310,17 +2295,17 @@ installed addons will be checked for available updates - + Retrieving macro description... 檢索巨集描述... - + Retrieving info from git 從 git 中檢索訊息 - + Retrieving info from wiki 從 git 中檢索訊息 @@ -2382,25 +2367,40 @@ installed addons will be checked for available updates 某些附加元件可能已經被更新了 - - Loading README data... - Loading README data... + + Loading page for {} from {}... + Loading page for {} from {}... - + Failed to download data from {} -- received response code {}. Failed to download data from {} -- received response code {}. + + + Composite view + Composite view + + + + Expanded view + Expanded view + + + + Compact view + Compact view + Std_AddonMgr - + &Addon manager &附加元件管理器 - + Manage external workbenches, macros, and preference packs 管理外部工作台、巨集和偏好設定套件 @@ -2437,7 +2437,7 @@ installed addons will be checked for available updates QObject - + Addon Manager 附加元件管理器 diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index e99d991f26..dc2d5c008c 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -1258,8 +1258,8 @@ are placed in a 'Group' instead. - + Export options @@ -1680,40 +1680,40 @@ unit to work with when opening the file. - - + + Category - - - + + + Preset - - - - + + + + Length - - + + Width - + Height @@ -1729,8 +1729,8 @@ unit to work with when opening the file. - + Con&tinue @@ -1747,8 +1747,8 @@ unit to work with when opening the file. - + Facemaker returned an error @@ -1860,8 +1860,8 @@ unit to work with when opening the file. - + Couldn't compute a shape @@ -2023,25 +2023,25 @@ Site creation aborted. - + Unable to create a roof - + Please select a base object - + Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2056,37 +2056,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Id - + Angle (deg) - + Run (mm) - + IdRel - + Thickness (mm) - + Overhang (mm) - + Height (mm) @@ -2318,37 +2318,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - - + + Remove - - + + Add - - - - + + + + - + - - + + Edit @@ -2369,8 +2369,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Components @@ -2380,30 +2380,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Name - - + + Type - + Thickness - + Offset @@ -2471,9 +2471,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Axes @@ -2485,9 +2485,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written @@ -2497,8 +2497,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Please select only one base object or none @@ -3052,24 +3052,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela + - Description + + - - Value + - Unit @@ -3157,19 +3157,19 @@ Floor creation aborted. + - has a null shape - + Toggle subcomponents @@ -3179,8 +3179,8 @@ Floor creation aborted. - + Component @@ -3377,8 +3377,8 @@ Floor creation aborted. - + Building @@ -3749,14 +3749,14 @@ Building creation aborted. - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile @@ -3766,15 +3766,15 @@ Building creation aborted. - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element @@ -3789,8 +3789,8 @@ Building creation aborted. - + The facemaker type to use to build the profile of this object @@ -3867,9 +3867,9 @@ Building creation aborted. + - The type of this building @@ -4188,20 +4188,20 @@ Building creation aborted. - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane @@ -4236,8 +4236,8 @@ Building creation aborted. - + The type of this object @@ -4351,6 +4351,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + + The base file this component is built upon @@ -6667,9 +6672,9 @@ Building creation aborted. Command - - + + Transform diff --git a/src/Mod/Arch/Resources/translations/Arch_be.qm b/src/Mod/Arch/Resources/translations/Arch_be.qm index df2df11a80..a47468c7f9 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_be.qm and b/src/Mod/Arch/Resources/translations/Arch_be.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_be.ts b/src/Mod/Arch/Resources/translations/Arch_be.ts index 2207911c6d..66a737c13f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_be.ts +++ b/src/Mod/Arch/Resources/translations/Arch_be.ts @@ -766,17 +766,17 @@ IfcType:Wall - будуць улічвацца толькі аб'екты, ты Join base sketches of walls if possible - Join base sketches of walls if possible + Па магчымасці аб'яднаць асноўныя эскізы сцен Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + Пры неабходнасці выдаліць вонкавую геаметрыю асноўных эскізаў Do not compute areas for objects with more than - Do not compute areas for objects with more than + Не вылічае плошчы для аб'ектаў з больш чым @@ -916,22 +916,22 @@ instead of the FreeCAD web workbench Wall color - Wall color + Колер сцяны Structure color - Structure color + Колер канструкцыі Rebar color - Rebar color + Колер арматуры Window glass transparency - Window glass transparency + Празрыстасць аконнага шкла @@ -942,27 +942,27 @@ instead of the FreeCAD web workbench Window glass color - Window glass color + Колер аконнага шкла Panel color - Panel color + Колер панэлі Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Колер дапаможных элементаў (сеткі, восі і гэтак далей) Space transparency - Space transparency + Празрыстасць прасторы Space line style - Space line style + Стыль лініі для прасторы @@ -987,7 +987,7 @@ instead of the FreeCAD web workbench Space line color - Space line color + Колер лініі для прасторы @@ -997,42 +997,42 @@ instead of the FreeCAD web workbench Use sketches for walls - Use sketches for walls + Ужываць эскізы для сцен Pipe diameter - Pipe diameter + Дыяметр трубы Rebar diameter - Rebar diameter + Дыяметр арматуры Rebar offset - Rebar offset + Зрушэнне арматуры Stair length - Stair length + Даўжыня лесвіцы Stair width - Stair width + Шырыня лесвіцы Stair height - Stair height + Вышыня лесвіцы Number of stair steps - Number of stair steps + Колькасць ступеняў лесвіцы @@ -1293,8 +1293,8 @@ are placed in a 'Group' instead. DAE - + Export options Налады экспартавання @@ -1744,40 +1744,40 @@ unit to work with when opening the file. Налады чарчэння - - + + Category Катэгорыя - - - + + + Preset Перадустаноўка - - - - + + + + Length Даўжыня - - + + Width Шырыня - + Height Вышыня @@ -1793,8 +1793,8 @@ unit to work with when opening the file. Пераключыць даўжыню/шырыню - + Con&tinue Пра&цягнуць @@ -1811,8 +1811,8 @@ unit to work with when opening the file. Паліганальная сетка з'яўляецца хібным суцэльным целам - + Facemaker returned an error Майстар граняў вярнуў памылку @@ -1925,8 +1925,8 @@ unit to work with when opening the file. Зроблена - + Couldn't compute a shape Не атрымалася вылічыць фігуру @@ -2096,25 +2096,25 @@ Site creation aborted. - + Unable to create a roof Немагчыма стварыць дах - + Please select a base object Калі ласка, абярыце асноўны аб'ект - + Roof Дах - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2139,37 +2139,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Калі прагон = 0, то прагон разлічваецца такім чынам, каб вышыня супадала з адносным профілем. - + Id Ідэнтыфікатар - + Angle (deg) Вугал (градус) - + Run (mm) Прагон (мм) - + IdRel IdRel - + Thickness (mm) Таўшчыня (мм) - + Overhang (mm) Навісь (мм) - + Height (mm) Вышыня (мм) @@ -2181,27 +2181,27 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Opening - Opening + Адкрыццё Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Абраць два аб'екты ў паказаным парадку: аб'ект, які трэба абрэзаць, і аб'ект, які вызначае плоскасць разрэзу The first object does not have a shape - The first object does not have a shape + Першы аб'ект не мае фігуры The second object does not define a plane - The second object does not define a plane + Другі аб'ект не вызначае плоскасць @@ -2404,37 +2404,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Выбраць абранае - - + + Remove Выдаліць - - + + Add Дадаць - - - - + + + + - + - - + + Edit Змяніць @@ -2455,8 +2455,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ломаныя лініі - + Components Кампаненты @@ -2466,30 +2466,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Стварыць новы кампанент - + Name Назва - - + + Type Тып - + Thickness Таўшчыня - + Offset Зрушэнне @@ -2557,9 +2557,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Калі ласка, абярыце хаця б адну вось - + Axes Восі @@ -2571,9 +2571,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Паспяхова запісана @@ -2583,8 +2583,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Канструкцыя ферма - + Please select only one base object or none Калі ласка, абярыце толькі адзін асноўны аб'ект, альбо нічога @@ -3138,24 +3138,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Немагчыма распазнаць тып файла + - Description Апісанне + + - - Value Значэнне + - Unit Адзінка вымярэння @@ -3251,19 +3251,19 @@ Floor creation aborted. мае хібную фігуру + - has a null shape мае пустую фігуру - + Toggle subcomponents Пераключыць укладзеныя кампаненты @@ -3273,8 +3273,8 @@ Floor creation aborted. Зачыненне змены Эскізу - + Component Кампанент @@ -3471,8 +3471,8 @@ Floor creation aborted. Цэнтруе плоскасць па аб'ектах з прыведзенага вышэй спісу - + Building Будынак @@ -3851,14 +3851,14 @@ Building creation aborted. Кручэнне асновы вакол восі інструмента (ужываецца толькі ў тым выпадку, калі BasePerpendicularToTool зададзены ў True) - + The length of this element, if not based on a profile Даўжыня элементу, калі не заснаваны на профілі - + The width of this element, if not based on a profile Шырыня элементу, калі не заснаваны на профілі @@ -3868,15 +3868,15 @@ Building creation aborted. Вышыня ці глыбіня выдушвання элементу. Задайце 0 для аўтаматычнага вызначэння - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Вектар нармалі напрамку выдушвання аб'екту (пакіньце (0,0,0) для аўтаматычнага вектару нармалі) - + The structural nodes of this element Структурныя вузлы элемента @@ -3891,8 +3891,8 @@ Building creation aborted. Адлегласць зрушэння паміж цэнтральнай ліній і лініяй вузлоў - + The facemaker type to use to build the profile of this object Тып майстра граняў, які ўжываецца для стварэння профілю аб'екта @@ -3969,9 +3969,9 @@ Building creation aborted. Электрычная магутнасць у ватах (Вт), якая неабходная абсталяванню + - The type of this building Тып будынка @@ -4290,20 +4290,20 @@ Building creation aborted. URL-адрас, які паказвае дадзеную мясцовасць на супастаўленым інтэрнэт-сайце - + Other shapes that are appended to this object Іншыя фігуры, якія дадаюцца да аб'екта - + Other shapes that are subtracted from this object Іншыя фігуры, якія адымаюцца ад аб'екту - + The area of the projection of this object onto the XY plane Плошча праекцыі аб'екту на плоскасць XY @@ -4338,8 +4338,8 @@ Building creation aborted. Неабавязковае зрушэнне паміж пачаткам каардынат мадэлі (0,0,0) і кропкай, названай геаграфічнымі каардынатамі - + The type of this object Тып аб'екту @@ -4453,6 +4453,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Паказвае, ці варта мяняць напрамак нахілу даху + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6769,9 +6774,9 @@ Building creation aborted. Command - - + + Transform Пераўтварыць diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index 1aec8cb201..cc7ace9d25 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index e3a47eb9f3..0e0c1dd4f6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -1271,8 +1271,8 @@ es col·loquen en un grup. DAE - + Export options Opcions d'exportació @@ -1703,40 +1703,40 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Mode de dibuix - - + + Category Categoria - - - + + + Preset Predefinits - - - - + + + + Length Longitud - - + + Width Amplària - + Height Alçària @@ -1752,8 +1752,8 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Canvia L/W - + Con&tinue Con&tinua @@ -1770,8 +1770,8 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Aquesta malla no és un sòlid vàlid - + Facemaker returned an error El generador de cares ha retornat un error @@ -1884,8 +1884,8 @@ De totes maneres, algunes aplicacions BIM utilitzen aquest factor per escollir q Fet - + Couldn't compute a shape No s'ha pogut calcular la forma @@ -2053,25 +2053,25 @@ Site creation aborted. - + Unable to create a roof No s'ha pogut crear un sostre - + Please select a base object Seleccioneu un objecte base - + Roof Sostre - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2096,37 +2096,37 @@ Si Angle = 0 aleshores l'angle es calcula de manera que l'alçària siga la mate Si Distància = 0 aleshores la distància es calcula de manera que l'alçària siga la mateixa que la del perfil relatiu. - + Id Id - + Angle (deg) Angle (graus) - + Run (mm) Distància (mm) - + IdRel IdRel - + Thickness (mm) Gruix (mm) - + Overhang (mm) Ràfec (mm) - + Height (mm) Alçada (mm) @@ -2361,37 +2361,37 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Tria el seleccionat - - + + Remove Elimina - - + + Add Afegeix - - - - + + + + - + - - + + Edit Edita @@ -2412,8 +2412,8 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Wires - + Components Components @@ -2423,30 +2423,30 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Crea un component nou - + Name Nom - - + + Type Tipus - + Thickness Gruix - + Offset Equidistancia (ofset) @@ -2514,9 +2514,9 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Please select at least one axis - + Axes Axes @@ -2528,9 +2528,9 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s - + Successfully written Successfully written @@ -2540,8 +2540,8 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Gelosia - + Please select only one base object or none Please select only one base object or none @@ -3095,24 +3095,24 @@ Si Distància = 0 aleshores la distància es calcula de manera que l'alçària s Unable to recognize that file type + - Description Descripció + + - - Value Valor + - Unit Unitat @@ -3208,19 +3208,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3230,8 +3230,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3428,8 +3428,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Construcció @@ -3808,14 +3808,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3825,15 +3825,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3848,8 +3848,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3926,9 +3926,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4247,20 +4247,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4295,8 +4295,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4410,6 +4410,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6726,9 +6731,9 @@ Building creation aborted. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index dceabf64cc..1642cc494d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 3850ac1aaa..ce2c789045 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -1282,8 +1282,8 @@ jsou místo toho umístěny do „skupiny“. DAE - + Export options Možnosti exportu @@ -1735,40 +1735,40 @@ bude pracovat při otevírání souboru. Režim kreslení - - + + Category Kategorie - - - + + + Preset Předvolba - - - - + + + + Length Délka - - + + Width Šířka - + Height Výška @@ -1784,8 +1784,8 @@ bude pracovat při otevírání souboru. Přepnout L/W - + Con&tinue Pokračovat @@ -1802,8 +1802,8 @@ bude pracovat při otevírání souboru. Tato síť netvoří platné těleso - + Facemaker returned an error Fakulta vrátila chybu @@ -1916,8 +1916,8 @@ bude pracovat při otevírání souboru. Hotovo - + Couldn't compute a shape Nelze vypočítat tvar @@ -2087,25 +2087,25 @@ Vytvoření webu bylo přerušeno. - + Unable to create a roof Nelze vytvořit střechu - + Please select a base object Vyber základní objekt - + Roof Střecha - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2130,37 +2130,37 @@ Pokud je úhel = 0, pak se úhel vypočítá tak, aby výška byla stejná jako Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relativní profil. - + Id ID - + Angle (deg) Úhel (deg) - + Run (mm) Spustit (mm) - + IdRel IdRel - + Thickness (mm) Tloušťka (mm) - + Overhang (mm) Přesah (mm) - + Height (mm) Výška (mm) @@ -2395,37 +2395,37 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Vybrat vybrané - - + + Remove Odstranit - - + + Add Přidat - - - - + + + + - + - - + + Edit Upravit @@ -2446,8 +2446,8 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Dráty - + Components Komponenty @@ -2457,30 +2457,30 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Vytvořit nový díl - + Name Jméno - - + + Type Typ - + Thickness Tloušťka - + Offset Odstup @@ -2548,9 +2548,9 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Vyberte prosím alespoň jednu osu - + Axes Osy @@ -2562,9 +2562,9 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati - + Successfully written Úspěšně zapsáno @@ -2574,8 +2574,8 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Vazník - + Please select only one base object or none Vyberte prosím pouze jeden základní objekt nebo žádný @@ -3129,24 +3129,24 @@ Je-li Run = 0, pak se běh vypočítá tak, aby výška byla stejná jako relati Unable to recognize that file type + - Description Popis + + - - Value Hodnota + - Unit Jednotka @@ -3242,19 +3242,19 @@ Floor creation aborted. má neplatný tvar + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3264,8 +3264,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3462,8 +3462,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Budova @@ -3842,14 +3842,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3859,15 +3859,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3882,8 +3882,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3960,9 +3960,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4281,20 +4281,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4329,8 +4329,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object Typ tohoto objektu @@ -4444,6 +4444,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6760,9 +6765,9 @@ Building creation aborted. Command - - + + Transform Transformace diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index 2f4b82a5cd..52d4c8267b 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 2b3480aaf1..705f4f2438 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -750,17 +750,17 @@ Deaktivieren um alle Objekte des Dokuments zu verwenden Join base sketches of walls if possible - Join base sketches of walls if possible + Wenn möglich, die Grundskizzen der Wände verbinden Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + Externe Geometrie der Grundskizzen bei Bedarf entfernen Do not compute areas for objects with more than - Do not compute areas for objects with more than + Berechne keine Bereiche für Objekte mit mehr als @@ -899,22 +899,22 @@ instead of the FreeCAD web workbench Wall color - Wall color + Wandfarbe Structure color - Structure color + Strukturfarbe Rebar color - Rebar color + Bewährungsfarbe Window glass transparency - Window glass transparency + Fensterglastransparenz @@ -925,27 +925,27 @@ instead of the FreeCAD web workbench Window glass color - Window glass color + Fensterglasfarbe Panel color - Panel color + Panelfarbe Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Helferfarbe (Gitter, Achsen usw.) Space transparency - Space transparency + Raum-Transparenz Space line style - Space line style + Raum-Linienart @@ -970,7 +970,7 @@ instead of the FreeCAD web workbench Space line color - Space line color + Raum-Linienfarbe @@ -980,42 +980,42 @@ instead of the FreeCAD web workbench Use sketches for walls - Use sketches for walls + Skizzen für Wände verwenden Pipe diameter - Pipe diameter + Rohrdurchmesser Rebar diameter - Rebar diameter + Bewährungsdurchmesser Rebar offset - Rebar offset + Bewährungs-Versatz Stair length - Stair length + Treppenlänge Stair width - Stair width + Treppenbreite Stair height - Stair height + Treppenhöhe Number of stair steps - Number of stair steps + Anzahl Treppenstufen @@ -1270,8 +1270,8 @@ are placed in a 'Group' instead. DAE - + Export options Export Einstellungen @@ -1704,40 +1704,40 @@ unit to work with when opening the file. Planungsmodus - - + + Category Kategorie - - - + + + Preset Voreinstellung - - - - + + + + Length Länge - - + + Width Breite - + Height Höhe @@ -1753,8 +1753,8 @@ unit to work with when opening the file. Tausche L und B - + Con&tinue Fortfahren @@ -1771,8 +1771,8 @@ unit to work with when opening the file. Dieses Polygonnetz ist ein ungültiger Volumenkörper - + Facemaker returned an error Facemaker wurde mit Fehler beendet @@ -1885,8 +1885,8 @@ unit to work with when opening the file. Fertig - + Couldn't compute a shape Es konnte keine Form berechnet werden @@ -2056,25 +2056,25 @@ Grundstück Erstellung abgebrochen. - + Unable to create a roof Dach konnte nicht erzeugt werden - + Please select a base object Bitte ein Basisobjekt auswählen - + Roof Dach - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2099,37 +2099,37 @@ Wenn Winkel = 0 dann wird der Winkel so berechnet, dass die Höhe gleich dem rel Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem relativen Profil ist. - + Id ID - + Angle (deg) Winkel (Grad) - + Run (mm) Länge (mm) - + IdRel IdRel - + Thickness (mm) Dicke (mm) - + Overhang (mm) Überhang (mm) - + Height (mm) Höhe (mm) @@ -2141,27 +2141,27 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Opening - Opening + Öffnung Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Wählen Sie zwei Objekte, ein zu schneidendes Objekt und ein Objekt, das eine Schneidebene definiert, in dieser Reihenfolge The first object does not have a shape - The first object does not have a shape + Das erste Objekt hat keine Form The second object does not define a plane - The second object does not define a plane + Das zweite Objekt definiert keine Ebene @@ -2364,37 +2364,37 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Ausgewähltes wählen - - + + Remove Entfernen - - + + Add Hinzufügen - - - - + + + + - + - - + + Edit Bearbeiten @@ -2415,8 +2415,8 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Kantenzüge - + Components Komponenten @@ -2426,30 +2426,30 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Neue Komponente erstellen - + Name Name - - + + Type Typ - + Thickness Dicke - + Offset Versatz @@ -2517,9 +2517,9 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Bitte wählen Sie mindestens eine Achse - + Axes Achsen @@ -2531,9 +2531,9 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel - + Successfully written Erfolgreich geschrieben @@ -2543,8 +2543,8 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Traverse - + Please select only one base object or none Bitte wählen Sie nur ein Basisobjekt oder keines @@ -3098,24 +3098,24 @@ Wenn Länge = 0 dann wird die Länge so berechnet, dass die Höhe gleich dem rel Dateityp nicht erkannt + - Description Beschreibung + + - - Value Wert + - Unit Einheit @@ -3208,19 +3208,19 @@ Geschoß-Erstellung abgebrochen. hat eine ungültige Form + - has a null shape hat eine ungültige Form - + Toggle subcomponents Unterkomponenten umschalten @@ -3230,8 +3230,8 @@ Geschoß-Erstellung abgebrochen. Schließe Skizzenbearbeitung - + Component Komponente @@ -3428,8 +3428,8 @@ Geschoß-Erstellung abgebrochen. Zentriert die Ebene gemäß den Objekten in obiger Liste - + Building Gebäude @@ -3808,14 +3808,14 @@ Gebäudeerstellung abgebrochen. Rotation der Basis um die Werkzeug-Achse (funktioniert nur, wenn "Basis senkrecht zu Werkzeug"- aktiviert ist) - + The length of this element, if not based on a profile Die Länge dieses Elements, wenn es nicht auf einem Profil basiert - + The width of this element, if not based on a profile Die Breite dieses Elements, wenn es nicht auf einem Profil basiert @@ -3825,15 +3825,15 @@ Gebäudeerstellung abgebrochen. Die Höhe oder Extrusionstiefe dieses Elements. Behalten Sie 0 für automatische Bestimmung der Höhe - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normale Extrusionsrichtung dieses Objekts (behalten Sie (0,0,0) für die automatische Normale) - + The structural nodes of this element Die Strukturknoten dieses Elements @@ -3848,8 +3848,8 @@ Gebäudeerstellung abgebrochen. Versatzabstand zwischen der Mittellinie und der Knotenlinie - + The facemaker type to use to build the profile of this object Der Typ Flächenerzeuger, der verwendet werden soll, um das Profil dieses Objekts zu erstellen @@ -3926,9 +3926,9 @@ Gebäudeerstellung abgebrochen. Die elektrische Leistung in Watt, die dieses Gerät benötigt + - The type of this building Die Art dieses Gebäudes @@ -4247,20 +4247,20 @@ Gebäudeerstellung abgebrochen. Eine URL für diesen Standort in einer Karten-Webseite - + Other shapes that are appended to this object Andere Formen, die an dieses Objekt angehängt sind - + Other shapes that are subtracted from this object Andere Formen, die von diesem Objekt abgezogen werden - + The area of the projection of this object onto the XY plane Die Fläche der Projektion des Objekts auf die XY-Ebene @@ -4295,8 +4295,8 @@ Gebäudeerstellung abgebrochen. Ein optionaler Offset zwischen dem Modell-Ursprung (0,0,0) und dem von den Geokoordinaten angegebenen Punkt - + The type of this object Der Typ dieses Objekts @@ -4410,6 +4410,11 @@ Gebäudeerstellung abgebrochen. Specifies if the direction of the roof should be flipped Gibt an, ob die Richtung des Daches umdreht werden soll + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6726,9 +6731,9 @@ Gebäudeerstellung abgebrochen. Command - - + + Transform Transformieren diff --git a/src/Mod/Arch/Resources/translations/Arch_el.qm b/src/Mod/Arch/Resources/translations/Arch_el.qm index fba01dc018..b85a284a7f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_el.qm and b/src/Mod/Arch/Resources/translations/Arch_el.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index bc4aca0a17..2e1b1f4908 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -1279,8 +1279,8 @@ are placed in a 'Group' instead. DAE - + Export options Επιλογές εξαγωγής @@ -1732,40 +1732,40 @@ unit to work with when opening the file. Drawing mode - - + + Category Κατηγορία - - - + + + Preset Preset - - - - + + + + Length Μήκος - - + + Width Πλάτος - + Height Ύψος @@ -1781,8 +1781,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1799,8 +1799,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1913,8 +1913,8 @@ unit to work with when opening the file. Έγινε - + Couldn't compute a shape Couldn't compute a shape @@ -2084,25 +2084,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2127,37 +2127,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2392,37 +2392,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Διαλέξτε τα επιλεγμένα - - + + Remove Αφαίρεση - - + + Add Προσθήκη - - - - + + + + - + - - + + Edit Επεξεργασία @@ -2443,8 +2443,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Στοιχεία @@ -2454,30 +2454,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Όνομα - - + + Type Τύπος - + Thickness Πάχος - + Offset Μετατοπίστε @@ -2545,9 +2545,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2559,9 +2559,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2571,8 +2571,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3126,24 +3126,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Περιγραφή + + - - Value Τιμή + - Unit Μονάδα @@ -3239,19 +3239,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3261,8 +3261,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3459,8 +3459,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Κτίριο @@ -3839,14 +3839,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3856,15 +3856,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3879,8 +3879,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3957,9 +3957,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4278,20 +4278,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4326,8 +4326,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4441,6 +4441,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6757,9 +6762,9 @@ Building creation aborted. Command - - + + Transform Μετατόπιση diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm index a667cfc8f2..2bf928ed3d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm and b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index 68ac889578..dc8b0f31ae 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -1004,22 +1004,22 @@ en lugar del entorno de trabajo web FreeCAD Stair length - Stair length + Longitud de escalera Stair width - Stair width + Ancho de escalera Stair height - Stair height + Altura de escalera Number of stair steps - Number of stair steps + Número de escalones @@ -1282,8 +1282,8 @@ Los 'Buildings' y 'Storeys' siguen siendo importados si hay más de uno.DAE - + Export options Opciones de exportación @@ -1728,40 +1728,40 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Modo de dibujo - - + + Category Categoría - - - + + + Preset Predefinido - - - - + + + + Length Longitud - - + + Width Ancho - + Height Altura @@ -1777,8 +1777,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Cambiar L/W - + Con&tinue Con&tinuar @@ -1795,8 +1795,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Esta malla es un sólido no válido - + Facemaker returned an error Facemaker devolvió un error @@ -1909,8 +1909,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Hecho - + Couldn't compute a shape No se pudo procesar una forma @@ -2080,25 +2080,25 @@ Creación del sitio abortada. - + Unable to create a roof No se puede crear un techo - + Please select a base object Por favor, seleccione un objeto base - + Roof Techo - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2123,37 +2123,37 @@ Si Angulo = 0 entonces el angulo es calculado de forma que la altura sea igual a Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igual a la del perfil relativo. - + Id Identificación - + Angle (deg) Ángulo (grados) - + Run (mm) Ejecutar (mm) - + IdRel IdRel - + Thickness (mm) Grosor (mm) - + Overhang (mm) Alero (mm) - + Height (mm) Altura (mm) @@ -2165,27 +2165,27 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Opening - Opening + Abriendo Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Seleccione dos objetos, un objeto a cortar y un objeto que defina un plano de corte, en ese orden The first object does not have a shape - The first object does not have a shape + El primer objeto no tiene una forma The second object does not define a plane - The second object does not define a plane + El segundo objeto no define un plano @@ -2388,37 +2388,37 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Elegir lo seleccionado - - + + Remove Eliminar - - + + Add Agregar - - - - + + + + - + - - + + Edit Editar @@ -2439,8 +2439,8 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Alambres - + Components Componentes @@ -2450,30 +2450,30 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Crear nuevo componente - + Name Nombre - - + + Type Tipo - + Thickness Espesor - + Offset Desfase @@ -2541,9 +2541,9 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Por favor seleccione al menos un eje - + Axes Ejes @@ -2555,9 +2555,9 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu - + Successfully written Escrito correctamente @@ -2567,8 +2567,8 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Celosía - + Please select only one base object or none Por favor, seleccione sólo un objeto base o ninguno @@ -3122,24 +3122,24 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu No se puede reconocer ese tipo de archivo + - Description Descripción + + - - Value Valor + - Unit Unidad @@ -3235,19 +3235,19 @@ Creación de planta cancelada. Tiene una forma no válida + - has a null shape Tiene una forma nula - + Toggle subcomponents Alternar subcomponentes @@ -3257,8 +3257,8 @@ Creación de planta cancelada. Cerrando edición del esquema - + Component Componente @@ -3455,8 +3455,8 @@ Creación de planta cancelada. Centra el plano en los objetos de la lista anterior - + Building Edificio @@ -3835,14 +3835,14 @@ Creación de construcción cancelada. Rotación base alrededor del eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil @@ -3852,15 +3852,15 @@ Creación de construcción cancelada. La altura o profundidad de extrusión de este elemento. Mantener 0 para automático - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The structural nodes of this element Los nodos estructurales de este elemento @@ -3875,8 +3875,8 @@ Creación de construcción cancelada. Distancia de separación entre la línea central y las líneas punteadas - + The facemaker type to use to build the profile of this object El tipo facemaker se usa para construir el perfil de este objeto @@ -3953,9 +3953,9 @@ Creación de construcción cancelada. Potencia eléctrica necesaria por este equipo en Watts + - The type of this building Tipo de este edificio @@ -4274,20 +4274,20 @@ Creación de construcción cancelada. Una URL que muestra este sitio en un sitio web de mapeo - + Other shapes that are appended to this object Otras formas que están anexadas a este objeto - + Other shapes that are subtracted from this object Otras formas que están extraídas de este objeto - + The area of the projection of this object onto the XY plane El área de la proyección de este objeto sobre el plano XY @@ -4322,8 +4322,8 @@ Creación de construcción cancelada. Un desplazamiento opcional entre el origen del modelo (0,0,0) y el punto indicado por las coordenadas geográficas - + The type of this object El tipo de este objeto @@ -4437,6 +4437,11 @@ Creación de construcción cancelada. Specifies if the direction of the roof should be flipped Especifica si la dirección del techo debe ser invertida + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6753,9 +6758,9 @@ Creación de construcción cancelada. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 1e05e647ad..0ed78ce88e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index de561761b9..7571c82f43 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -1004,22 +1004,22 @@ en lugar del entorno de trabajo web FreeCAD Stair length - Stair length + Longitud de escalera Stair width - Stair width + Ancho de escalera Stair height - Stair height + Altura de escalera Number of stair steps - Number of stair steps + Número de escalones @@ -1282,8 +1282,8 @@ se colocan en 'Group' en su lugar. DAE - + Export options Opciones de exportación @@ -1728,40 +1728,40 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Modo de dibujo - - + + Category Categoría - - - + + + Preset Predefinido - - - - + + + + Length Longitud - - + + Width Ancho - + Height Altura @@ -1777,8 +1777,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Cambiar L/W - + Con&tinue Con&tinuar @@ -1795,8 +1795,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Esta malla es un sólido no válido - + Facemaker returned an error Facemaker devolvió un error @@ -1909,8 +1909,8 @@ En cualquier caso, algunas aplicaciones BIM usarán este factor para elegir con Hecho - + Couldn't compute a shape No se pudo procesar una forma @@ -2080,25 +2080,25 @@ Creación del sitio abortada. - + Unable to create a roof No se puede crear un techo - + Please select a base object Por favor, seleccione un objeto base - + Roof Techo - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2123,37 +2123,37 @@ Si Angulo = 0 entonces el angulo es calculado de forma que la altura sea igual a Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igual a la del perfil relativo. - + Id Identificación - + Angle (deg) Ángulo (grados) - + Run (mm) Ejecutar (mm) - + IdRel IdRel - + Thickness (mm) Grosor (mm) - + Overhang (mm) Alero (mm) - + Height (mm) Altura (mm) @@ -2165,27 +2165,27 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Opening - Opening + Abriendo Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Seleccione dos objetos, un objeto a cortar y un objeto que defina un plano de corte, en ese orden The first object does not have a shape - The first object does not have a shape + El primer objeto no tiene una forma The second object does not define a plane - The second object does not define a plane + El segundo objeto no define un plano @@ -2388,37 +2388,37 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Elegir lo seleccionado - - + + Remove Quitar - - + + Add Añadir - - - - + + + + - + - - + + Edit Editar @@ -2439,8 +2439,8 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Alambres - + Components Componentes @@ -2450,30 +2450,30 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Crear nuevo componente - + Name Nombre - - + + Type Tipo - + Thickness Espesor - + Offset Desplazamiento @@ -2541,9 +2541,9 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Por favor seleccione al menos un eje - + Axes Ejes @@ -2555,9 +2555,9 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu - + Successfully written Escrito correctamente @@ -2567,8 +2567,8 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu Celosía - + Please select only one base object or none Por favor, seleccione sólo un objeto base o ninguno @@ -3122,24 +3122,24 @@ Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igu No se puede reconocer ese tipo de archivo + - Description Descripción + + - - Value Valor + - Unit Unidad @@ -3235,19 +3235,19 @@ Creación de planta cancelada. Tiene una forma no válida + - has a null shape Tiene una forma nula - + Toggle subcomponents Alternar subcomponentes @@ -3257,8 +3257,8 @@ Creación de planta cancelada. Cerrando edición del esquema - + Component Componente @@ -3455,8 +3455,8 @@ Creación de planta cancelada. Centra el plano en los objetos de la lista anterior - + Building Construcción @@ -3835,14 +3835,14 @@ Creación de construcción cancelada. Rotación base alrededor del eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil @@ -3852,15 +3852,15 @@ Creación de construcción cancelada. La altura o profundidad de extrusión de este elemento. Mantener 0 para automático - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The structural nodes of this element Los nodos estructurales de este elemento @@ -3875,8 +3875,8 @@ Creación de construcción cancelada. Distancia de separación entre la línea central y las líneas punteadas - + The facemaker type to use to build the profile of this object El tipo facemaker se usa para construir el perfil de este objeto @@ -3953,9 +3953,9 @@ Creación de construcción cancelada. Potencia eléctrica necesaria por este equipo en Watts + - The type of this building Tipo de este edificio @@ -4274,20 +4274,20 @@ Creación de construcción cancelada. Una URL que muestra este sitio en un sitio web de mapeo - + Other shapes that are appended to this object Otras formas que están anexadas a este objeto - + Other shapes that are subtracted from this object Otras formas que están extraídas de este objeto - + The area of the projection of this object onto the XY plane El área de la proyección de este objeto sobre el plano XY @@ -4322,8 +4322,8 @@ Creación de construcción cancelada. Un desplazamiento opcional entre el origen del modelo (0,0,0) y el punto indicado por las coordenadas geográficas - + The type of this object El tipo de este objeto @@ -4437,6 +4437,11 @@ Creación de construcción cancelada. Specifies if the direction of the roof should be flipped Especifica si la dirección del techo debe ser invertida + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6753,9 +6758,9 @@ Creación de construcción cancelada. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index 06a18518dd..92067822c5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index 54d02dfcda..008dfc23c5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -1283,8 +1283,8 @@ objektu guztiak 'taldea' objektu batean kokatuko dira. DAE - + Export options Esportazio-aukerak @@ -1734,40 +1734,40 @@ dute fitxategia irekitzean zein unitatetan egingo duten lan aukeratzeko.Marrazte modua - - + + Category Kategoria - - - + + + Preset Aurrezarpena - - - - + + + + Length Luzera - - + + Width Zabalera - + Height Altuera @@ -1783,8 +1783,8 @@ dute fitxategia irekitzean zein unitatetan egingo duten lan aukeratzeko.Trukatu luz./zab. - + Con&tinue Ja&rraitu @@ -1801,8 +1801,8 @@ dute fitxategia irekitzean zein unitatetan egingo duten lan aukeratzeko.Amaraun hau solido baliogabea da - + Facemaker returned an error Aurpegi-sortzaileak errorea eman du @@ -1915,8 +1915,8 @@ dute fitxategia irekitzean zein unitatetan egingo duten lan aukeratzeko.Egina - + Couldn't compute a shape Ezin izan da forma bat kalkulatu @@ -2086,25 +2086,25 @@ Gunearen sorrera utzi egin da. - + Unable to create a roof Ezin da teilatua sortu - + Please select a base object Hautatu oinarri-objektu bat - + Roof Teilatua - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2129,37 +2129,37 @@ Angelua = 0 bada, orduan angelua kalkulatzen da altuera profil erlatiboaren berd Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboaren berdina izan dadin. - + Id Id - + Angle (deg) Angelua (graduak) - + Run (mm) Distantzia (mm) - + IdRel IdRel - + Thickness (mm) Lodiera (mm) - + Overhang (mm) Hegala (mm) - + Height (mm) Altuera (mm) @@ -2394,37 +2394,37 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Hartu hautatua - - + + Remove Kendu - - + + Add Gehitu - - - - + + + + - + - - + + Edit Editatu @@ -2445,8 +2445,8 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Alanbreak - + Components Osagaiak @@ -2456,30 +2456,30 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Sortu osagai berria - + Name Izena - - + + Type Mota - + Thickness Lodiera - + Offset Desplazamendua @@ -2547,9 +2547,9 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Hautatu gutxienez ardatz bat - + Axes Ardatzak @@ -2561,9 +2561,9 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare - + Successfully written Ongi idatzi da @@ -2573,8 +2573,8 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Zurajea - + Please select only one base object or none Hautatu oinarri-objektu bakar bat edo bat ere ez @@ -3128,24 +3128,24 @@ Distantzia = 0 bada, orduan distantzia kalkulatzen da altuera profil erlatiboare Ez da fitxategi mota hori ezagutzen + - Description Deskribapena + + - - Value Balioa + - Unit Unitatea @@ -3241,19 +3241,19 @@ Solairuaren sorrera utzi egin da. baliogabeko forma du + - has a null shape forma nulua du - + Toggle subcomponents Txandakatu azpiosagaiak @@ -3263,8 +3263,8 @@ Solairuaren sorrera utzi egin da. Krokisaren edizioa ixten - + Component Osagaia @@ -3461,8 +3461,8 @@ Solairuaren sorrera utzi egin da. Planoa goiko zerrendako objektuetan zentratzen du - + Building Eraikina @@ -3841,14 +3841,14 @@ Eraikinaren sorrera utzi egin da. Oinarriaren biraketa tresna-ardatzaren inguruan (BasePerpendicularToTool egia bada soilik erabilia) - + The length of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago - + The width of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago @@ -3858,15 +3858,15 @@ Eraikinaren sorrera utzi egin da. Elementu honen altuera edo estrusio-sakonera. Mantendu 0 balio automatikoa erabiltzeko - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Objektu honen estrusio-norabide normala (mantendu (0,0,0) normal automatikorako) - + The structural nodes of this element Elementu honen egiturazko nodoak @@ -3881,8 +3881,8 @@ Eraikinaren sorrera utzi egin da. Erdiko lerroaren eta nodo-lerroen arteko desplazamendu-distantzia - + The facemaker type to use to build the profile of this object Objektu honen profila eraikitzeko erabiliko den aurpegi-sortzailearen mota @@ -3959,9 +3959,9 @@ Eraikinaren sorrera utzi egin da. Ekipamendu honek behar duen energia elektrikoa, watt-etan + - The type of this building Eraikin honen mota @@ -4280,20 +4280,20 @@ Eraikinaren sorrera utzi egin da. Gune hau mapatze-webgune batean erakutsiko duen URL bat - + Other shapes that are appended to this object Objektu honi erantsitako beste forma batzuk - + Other shapes that are subtracted from this object Objektu honi kendutako beste forma batzuk - + The area of the projection of this object onto the XY plane Objektu honen proiekzioaren area XY planoan @@ -4328,8 +4328,8 @@ Eraikinaren sorrera utzi egin da. Ereduaren (0,0,0) jatorriaren eta geokoordinatuek adierazten duten puntuaren arteko aukerako desplazamendu bat - + The type of this object Objektu honen mota @@ -4443,6 +4443,11 @@ Eraikinaren sorrera utzi egin da. Specifies if the direction of the roof should be flipped Teilatuaren norabidea irauli behar den ala ez zehazten du + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6759,9 +6764,9 @@ Eraikinaren sorrera utzi egin da. Command - - + + Transform Transformatu diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.qm b/src/Mod/Arch/Resources/translations/Arch_fi.qm index ec43313ef9..289288a0d5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fi.qm and b/src/Mod/Arch/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 1f40df37b1..048fbd3a61 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -1283,8 +1283,8 @@ are placed in a 'Group' instead. DAE - + Export options Vientiasetukset @@ -1736,40 +1736,40 @@ unit to work with when opening the file. Drawing mode - - + + Category Kategoria - - - + + + Preset Preset - - - - + + + + Length Pituus - - + + Width Leveys - + Height Korkeus @@ -1785,8 +1785,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1803,8 +1803,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1917,8 +1917,8 @@ unit to work with when opening the file. Valmis - + Couldn't compute a shape Couldn't compute a shape @@ -2088,25 +2088,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2131,37 +2131,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Tunnus - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2396,37 +2396,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Valitse valittu - - + + Remove Poista - - + + Add Lisää - - - - + + + + - + - - + + Edit Muokkaa @@ -2447,8 +2447,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Osat @@ -2458,30 +2458,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Luo uusi komponentti - + Name Nimi - - + + Type Tyyppi - + Thickness Paksuus - + Offset Siirtymä @@ -2549,9 +2549,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2563,9 +2563,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2575,8 +2575,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3130,24 +3130,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Kuvaus + + - - Value Arvo + - Unit Yksikkö @@ -3243,19 +3243,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3265,8 +3265,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3463,8 +3463,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Rakennus @@ -3843,14 +3843,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3860,15 +3860,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3883,8 +3883,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3961,9 +3961,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4282,20 +4282,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4330,8 +4330,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4445,6 +4445,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6761,9 +6766,9 @@ Building creation aborted. Command - - + + Transform Muunna diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index 95d0ce78bf..0114996f62 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index ac61126c5a..7f54c11b95 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -400,7 +400,8 @@ Notez qu'à partir de LibreOffice v6.x, le chemin correct est maintenant : Feuil List of IFC properties for this object. Double-click to edit, drag and drop to reorganize - Liste des propriétés IFC pour cet objet. Double-cliquez pour modifier, glissez et déposez pour réorganiser + Liste des propriétés IFC pour cet objet. +Double-cliquez pour modifier. Glissez et déposez pour réorganiser. @@ -661,8 +662,8 @@ murs ne formeront plus qu'un seul et même mur. If this is checked, when an object becomes Subtraction or Addition of an Arch object, it will receive the Draft Construction color. - Si cette option est cochée, lorsqu’un objet devient une soustraction ou une -addition d’un objet Arch, il recevra la couleur de construction de Draft. + Si cette option est cochée, lorsqu’un objet deviendra une soustraction ou une +addition d’un objet Arch. Il recevra la couleur de construction de Draft. @@ -703,7 +704,7 @@ Cela signifie qu'ils ne se déplacent pas lorsque leur objet hôte est déplacé If this is checked, when an Arch object has a material, the object will take the color of the material. This can be overridden for each object. - Si cette case est cochée, lorsqu'un objet Arch a un matériau, l'objet prendra la couleur de ce matériau. + Si cette option est cochée, lorsqu'un objet Arch a un matériau, l'objet prendra la couleur de ce matériau. Cette option peut être modifiée pour chaque objet. @@ -739,7 +740,7 @@ Cette option peut être modifiée pour chaque objet. If this is checked, conversion is faster but the result might still contain triangulated faces - Si cette case est cochée, la conversion est plus rapide mais + Si cette option est cochée, la conversion est plus rapide mais le résultat pourrait encore contenir des faces triangulées. @@ -761,17 +762,17 @@ Cela peut entraîner des erreurs de continuité et des résultats non solides. Join base sketches of walls if possible - Join base sketches of walls if possible + Joindre les esquisses de base des murs si possible Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + Supprimer la géométrie externe des esquisses de base si nécessaire Do not compute areas for objects with more than - Do not compute areas for objects with more than + Ne pas calculer les surfaces pour les objets avec plus de @@ -907,27 +908,27 @@ Dans le cas contraire, ce sera un simple nombre exprimé en unité interne (mill Visual - Visuel + Paramètres graphiques Wall color - Wall color + Couleur des murs Structure color - Structure color + Couleur des structures Rebar color - Rebar color + Couleur des armatures Window glass transparency - Window glass transparency + Transparence du verre des fenêtres @@ -938,27 +939,27 @@ Dans le cas contraire, ce sera un simple nombre exprimé en unité interne (mill Window glass color - Window glass color + Couleur du verre des fenêtres Panel color - Panel color + Couleur des panneaux Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Couleur de l'assistant (grilles, axes, etc.) Space transparency - Space transparency + Transparence des espaces Space line style - Space line style + Style des lignes des espaces @@ -983,7 +984,7 @@ Dans le cas contraire, ce sera un simple nombre exprimé en unité interne (mill Space line color - Space line color + Couleur des lignes des espaces @@ -993,42 +994,42 @@ Dans le cas contraire, ce sera un simple nombre exprimé en unité interne (mill Use sketches for walls - Use sketches for walls + Utiliser des esquisses pour les murs Pipe diameter - Pipe diameter + Diamètre de la tuyauterie Rebar diameter - Rebar diameter + Diamètre des armatures Rebar offset - Rebar offset + Décalage des armatures Stair length - Stair length + Longueur des escaliers Stair width - Stair width + Largeur des escaliers Stair height - Stair height + Hauteur des escaliers Number of stair steps - Number of stair steps + Nombre de marches des escaliers @@ -1226,7 +1227,7 @@ they will be treated as one. IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. Les fichiers IFC peuvent contenir des géométries incorrectes ou non solides. -Si cette option est cochée, toutes les géométries sont importées, quelle que soit leur validité. +Si cette option est cochée, toutes les géométries seront importées, quelle que soit leur validité. @@ -1274,8 +1275,8 @@ objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. Si cette option est cochée, les objets par défaut "Projet", "Site", "Bâtiment" et "Étages" -qui se trouvent habituellement dans un fichier IFC ne sont pas importés et tous les -objets sont placés dans un "Groupe" à la place. +qui se trouvent habituellement dans un fichier IFC ne seront pas importés et tous les +objets seront placés dans un "Groupe" à la place. Les objets "Bâtiments" et "Étages" sont toujours importés s'il y en a plus d'un. @@ -1289,8 +1290,8 @@ Les objets "Bâtiments" et "Étages" sont toujours importés s'il y en a plus d' DAE - + Export options Options d'exportation @@ -1491,7 +1492,7 @@ Utilisez cette option pour forcer tous les objets à être exportés en tant que are decomposed into flat facets. If this is checked, an additional calculation is done to join coplanar facets. Les formes courbes qui ne peuvent pas être représentées comme des courbes en IFC sont décomposées en facettes planes. -Si cette option est cochée, un calcul supplémentaire est effectué pour joindre les facettes coplanaires. +Si cette option est cochée, un calcul supplémentaire sera effectué pour joindre les facettes coplanaires. @@ -1733,40 +1734,40 @@ travailler lors de l'ouverture du fichier. Mode Dessin - - + + Category Catégorie - - - + + + Preset Préréglage - - - - + + + + Length Longueur - - + + Width Largeur - + Height Hauteur @@ -1782,8 +1783,8 @@ travailler lors de l'ouverture du fichier. Intervertir L/La - + Con&tinue Poursuivre @@ -1800,8 +1801,8 @@ travailler lors de l'ouverture du fichier. Ce maillage n'est pas un solide valide - + Facemaker returned an error FaceMaker a retouné une erreur @@ -1914,8 +1915,8 @@ travailler lors de l'ouverture du fichier. Fait - + Couldn't compute a shape Impossible de calculer une forme @@ -2085,25 +2086,25 @@ La création du site est annulée. - + Unable to create a roof Impossible de créer un toit - + Please select a base object Sélectionner un objet de base - + Roof Toit - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2128,37 +2129,37 @@ Si Angle = 0 alors l'angle est calculé de sorte que la hauteur soit la même qu Si Course = 0 alors la course est calculée de façon à ce que la hauteur du profilé soit la même que celle du profilé relatif. - + Id Identifiant - + Angle (deg) Angle (deg) - + Run (mm) Course (mm) - + IdRel Identifiant rel. - + Thickness (mm) Épaisseur (mm) - + Overhang (mm) Débord (mm) - + Height (mm) Hauteur (mm) @@ -2170,28 +2171,25 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Opening - Opening + Ouverture Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order - + Sélectionner deux objets, un objet à couper et un objet définissant un plan de coupe, dans cet ordre. The first object does not have a shape - The first object does not have a shape - + Le premier objet n'a pas de forme. The second object does not define a plane - The second object does not define a plane - + Le second objet ne définit pas un plan. @@ -2393,37 +2391,37 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Choisir la sélection - - + + Remove Supprimer - - + + Add Ajouter - - - - + + + + - + - - + + Edit Éditer @@ -2444,8 +2442,8 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Polylignes - + Components Composants @@ -2455,30 +2453,30 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Créer un nouveau composant - + Name Nom - - + + Type Type - + Thickness Épaisseur - + Offset Décalage @@ -2501,12 +2499,12 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr If this is checked, the default Frame value of this window will be added to the value entered here - Si cette case est cochée, la valeur par défaut du cadre de cette fenêtre s’ajoutera à la valeur entrée ici + Si cette option est cochée, la valeur par défaut du cadre de cette fenêtre s’ajoutera à la valeur entrée ici. If this is checked, the default Offset value of this window will be added to the value entered here - Si cette case est cochée, la valeur par défaut du décalage de cette fenêtre s’ajoutera à la valeur entrée ici + Si cette option est cochée, la valeur par défaut du décalage de cette fenêtre s’ajoutera à la valeur entrée ici. @@ -2546,9 +2544,9 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Sélectionner au moins un axe - + Axes Axes @@ -2560,9 +2558,9 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr - + Successfully written Écrit avec succès @@ -2572,8 +2570,8 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Treillis - + Please select only one base object or none Sélectionner un seul objet de base ou aucun @@ -3127,24 +3125,24 @@ Si Course = 0 alors la course est calculée de façon à ce que la hauteur du pr Impossible de reconnaître ce type de fichier + - Description Description + + - - Value Valeur + - Unit Unité @@ -3240,19 +3238,19 @@ La création du niveau est annulée. a une forme non valide + - has a null shape a une forme nulle - + Toggle subcomponents Activer/désactiver les sous-composants @@ -3262,8 +3260,8 @@ La création du niveau est annulée. Fermeture de l'édition de l'esquisse - + Component Composant @@ -3356,7 +3354,7 @@ La création du niveau est annulée. Create Rebar - Créer une barre d'armature + Créer une armature @@ -3460,8 +3458,8 @@ La création du niveau est annulée. Centre le plan sur les objets de la liste ci-dessus - + Building Bâtiment @@ -3687,13 +3685,13 @@ La création du bâtiment est annulée. Disabling Brep force flag of object - Désactivation de l'indicateur de force Brep de l'objet + Désactivation du marqueur de forçage BREP de l'objet Enabling Brep force flag of object - Activation de l'indicateur de force Brep de l'objet + Activation du marqueur de forçage BREP de l'objet @@ -3840,14 +3838,14 @@ La création du bâtiment est annulée. Rotation de la base autour de l'axe de l'outil (utilisé uniquement si BasePerpendicularToTool est mis à vrai) - + The length of this element, if not based on a profile La longueur de cet élément, si il n'est pas basé sur un profil - + The width of this element, if not based on a profile La largeur de cet élément, si il n'est pas basé sur un profilé @@ -3857,15 +3855,15 @@ La création du bâtiment est annulée. La hauteur ou profondeur d’extrusion de cet élément. Laisser à 0 pour un réglage automatique - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direction d'extrusion normale de cet objet (laisser à (0,0,0) pour une normale automatique) - + The structural nodes of this element Les nœuds structurels de cet élément @@ -3880,8 +3878,8 @@ La création du bâtiment est annulée. Décalage entre la ligne centrale et la ligne des nœuds - + The facemaker type to use to build the profile of this object Le type de facemaker à utiliser pour créer le profilé de cet objet @@ -3958,9 +3956,9 @@ La création du bâtiment est annulée. La puissance électrique nécessaire à cet équipement en Watts + - The type of this building Le type de ce bâtiment @@ -4103,7 +4101,7 @@ La création du bâtiment est annulée. A slot to save the inventor representation of this object, if enabled - Un emplacement pour sauvegarder la représentation d'Inventor de cet objet, si l'option est activée + Un emplacement pour sauvegarder la représentation d'Inventor de cet objet, si l'option est cochée. @@ -4279,20 +4277,20 @@ La création du bâtiment est annulée. URL montrant ce site sur un site de cartographie - + Other shapes that are appended to this object Autres formes ajoutées à cet objet - + Other shapes that are subtracted from this object Autres formes soustraites de cet objet - + The area of the projection of this object onto the XY plane Surface projetée de l'objet sur un plan XY @@ -4327,8 +4325,8 @@ La création du bâtiment est annulée. Un décalage facultatif entre l'origine du modèle (0,0,0) et le point indiqué par les géocoordonnées - + The type of this object Le type de cet objet @@ -4442,6 +4440,11 @@ La création du bâtiment est annulée. Specifies if the direction of the roof should be flipped Spécifie si le sens du toit doit être inversé + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -5592,7 +5595,7 @@ La création du bâtiment est annulée. The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - La distance totale à couvrir par les barres d'armature. Garder 0 pour utiliser automatiquement la taille de la forme hôte. + La distance totale à couvrir par les armatures. Garder 0 pour utiliser automatiquement la taille de la forme hôte. @@ -5607,12 +5610,12 @@ La création du bâtiment est annulée. List of placement of all the bars - Liste des emplacements de toutes les barres + Liste des positions de toutes les barres The structure object that hosts this rebar - L'objet structurel qui accueille cette barre d'armature + L'objet structurel qui accueille cette armature. @@ -6701,7 +6704,7 @@ La création du bâtiment est annulée. Force an object to be exported as Brep or not - Forcer un objet à être exporté en tant que Brep ou non + Forcer un objet à être exporté en tant que BREP ou non @@ -6759,9 +6762,9 @@ La création du bâtiment est annulée. Command - - + + Transform Transformer diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.qm b/src/Mod/Arch/Resources/translations/Arch_gl.qm index 9b016d8431..315055f381 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_gl.qm and b/src/Mod/Arch/Resources/translations/Arch_gl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index 281c86157c..c6a509c282 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -1283,8 +1283,8 @@ are placed in a 'Group' instead. DAE - + Export options Opcións de exportación @@ -1736,40 +1736,40 @@ unit to work with when opening the file. Drawing mode - - + + Category Categoría - - - + + + Preset Preset - - - - + + + + Length Lonxitude - - + + Width Largura - + Height Altura @@ -1785,8 +1785,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1803,8 +1803,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1917,8 +1917,8 @@ unit to work with when opening the file. Feito - + Couldn't compute a shape Couldn't compute a shape @@ -2088,25 +2088,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2131,37 +2131,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2396,37 +2396,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Elixir o escolmado - - + + Remove Rexeitar - - + + Add Engadir - - - - + + + + - + - - + + Edit Editar @@ -2447,8 +2447,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Compoñentes @@ -2458,30 +2458,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Nome - - + + Type Tipo - + Thickness Grosor - + Offset Separación @@ -2549,9 +2549,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2563,9 +2563,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2575,8 +2575,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3130,24 +3130,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Descrición + + - - Value Valor + - Unit Unidade @@ -3243,19 +3243,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3265,8 +3265,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3463,8 +3463,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Edificio @@ -3843,14 +3843,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3860,15 +3860,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3883,8 +3883,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3961,9 +3961,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4282,20 +4282,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4330,8 +4330,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4445,6 +4445,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6761,9 +6766,9 @@ Building creation aborted. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.qm b/src/Mod/Arch/Resources/translations/Arch_hr.qm index 91f8cc1dc7..7ed39267ea 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hr.qm and b/src/Mod/Arch/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 076b75f684..3cd4dd4079 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -1295,8 +1295,8 @@ umjesto toga smješteni su u "Grupu". DAE - + Export options Postavke izvoza @@ -1751,33 +1751,33 @@ jedinice s kojom treba raditi prilikom otvaranja datoteke. Način crtanja - - + + Category Kategorija - - - + + + Preset Unaprijed postavljene postavke - - - - + + + + Length Dužina - - + + Width @@ -1785,8 +1785,8 @@ jedinice s kojom treba raditi prilikom otvaranja datoteke. Širina - + Height Visina @@ -1802,8 +1802,8 @@ jedinice s kojom treba raditi prilikom otvaranja datoteke. Obrni D/Š - + Con&tinue Nas&tavi @@ -1820,8 +1820,8 @@ jedinice s kojom treba raditi prilikom otvaranja datoteke. Ova mreža je nevažeće čvrsto tijelo - + Facemaker returned an error Graditelj lica je vratio pogrešku @@ -1934,8 +1934,8 @@ jedinice s kojom treba raditi prilikom otvaranja datoteke. Gotovo - + Couldn't compute a shape Oblik se nije mogao izračunati @@ -2105,25 +2105,25 @@ Stvaranje Parcele prekinuto. - + Unable to create a roof Nije moguće izraditi krov - + Please select a base object Odaberite osnovni objekt - + Roof Krovište - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2148,37 +2148,37 @@ Ako je Kut = 0, tada se kut izračunava tako da je visina jednaka relativnom pro Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativnom profilu. - + Id ID - + Angle (deg) Kut (stupnjeva) - + Run (mm) Pokreni (mm) - + IdRel IdRel - + Thickness (mm) Debljina (mm) - + Overhang (mm) Izbočenje (mm) - + Height (mm) Visina (mm) @@ -2425,37 +2425,37 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Pokupi odabrano - - + + Remove Ukloni - - + + Add Dodaj - - - - + + + + - + - - + + Edit Uredi @@ -2476,8 +2476,8 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Žice - + Components Komponente @@ -2487,30 +2487,30 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Izradi novu komponentu - + Name Ime - - + + Type Tip - + Thickness Debljina - + Offset Pomak @@ -2582,9 +2582,9 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Molimo odaberite najmanje jednu os - + Axes Osi @@ -2596,9 +2596,9 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn - + Successfully written Uspješno napisan @@ -2608,8 +2608,8 @@ Ako je Run = 0, tada se proračun izračunava tako da je visina jednaka relativn Poprečna greda - + Please select only one base object or none Odaberite samo jedan osnovni objekt ili nijedan @@ -3165,24 +3165,24 @@ Here is a breakdown of the translation: Nije moguće prepoznati vrstu datoteke + - Description Opis + + - - Value Vrijednost + - Unit Jedinica @@ -3278,19 +3278,19 @@ Stvaranje etaže prekinuto. ima jedan neispravan oblik + - has a null shape ima jedan ništavni oblik - + Toggle subcomponents Uključivanje/isključivanje podsastavnice @@ -3300,8 +3300,8 @@ Stvaranje etaže prekinuto. Zatvori uređivanje Skice - + Component Komponenta @@ -3498,8 +3498,8 @@ Stvaranje etaže prekinuto. Centrira ravninu na objekte na gornjem popisu - + Building Zgrada @@ -3882,14 +3882,14 @@ Stvaranje zgrade prekinuto. Rotacija osnove oko osi alata (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + The length of this element, if not based on a profile Dužina ovog elementa, ako se ne temelji na profilu - + The width of this element, if not based on a profile Širina ovog elementa, ako se ne temelji na profilu @@ -3899,15 +3899,15 @@ Stvaranje zgrade prekinuto. Visine ili dubina istiskivanja ovog elementa. Držite 0 za automatsko - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Smjer normalnog istiskivanja objekta (zadrži (0,0,0) za automatsko normalno) - + The structural nodes of this element Strukturni čvorovi ovog elementa @@ -3922,8 +3922,8 @@ Stvaranje zgrade prekinuto. Udaljenost od centralne linije i čvora - + The facemaker type to use to build the profile of this object Vrsta dotjeravanja izgleda, koristi se za izgradnju profila ovog objekta @@ -4000,9 +4000,9 @@ Stvaranje zgrade prekinuto. Električna energija potrebna u ovoj opremi + - The type of this building Vrsta ove zgrade @@ -4324,20 +4324,20 @@ Stvaranje zgrade prekinuto. Url koji pokazuje ovo mjesto na mapiranoj web-stranici - + Other shapes that are appended to this object Drugi oblici koji su dodani ovom objektu - + Other shapes that are subtracted from this object Drugi oblici koji su oduzeti ovom objektu - + The area of the projection of this object onto the XY plane Područje projekcije ovog objekta na ravnini XY @@ -4372,8 +4372,8 @@ Stvaranje zgrade prekinuto. Opcionalni pomak između porijekla modela (0,0,0) i mjesta označenog na geokoordinatama - + The type of this object Tip ovog objekta @@ -4501,6 +4501,11 @@ Stvaranje zgrade prekinuto. + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6831,9 +6836,9 @@ Stvaranje zgrade prekinuto. Command - - + + Transform Transformacija diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index 29016b0f01..ef276c2a81 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index e2616c4e45..964ee4c37f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -751,17 +751,17 @@ Hagyja üresen a dokumentum összes objektumának használatát Join base sketches of walls if possible - Join base sketches of walls if possible + A falak alapvázlatainak összekapcsolása, ha lehetséges Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + Távolítsa el az alap vázlatok külső geometriáit, ha szükséges Do not compute areas for objects with more than - Do not compute areas for objects with more than + Ne számítson tárgyaknak nagyobb területeket mint @@ -904,22 +904,22 @@ a FreeCAD webes munkaasztal helyett Wall color - Wall color + Falszín Structure color - Structure color + Szerkezet színe Rebar color - Rebar color + Megerősítő színe Window glass transparency - Window glass transparency + Ablaküveg átlátszósága @@ -930,27 +930,27 @@ a FreeCAD webes munkaasztal helyett Window glass color - Window glass color + Ablaküveg színe Panel color - Panel color + Panelszín Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Segítők színe (rácsok, tengelyek, stb.) Space transparency - Space transparency + Térköz átlátszóság Space line style - Space line style + Térköz vonal stílusa @@ -975,7 +975,7 @@ a FreeCAD webes munkaasztal helyett Space line color - Space line color + Térköz vonal színe @@ -985,42 +985,42 @@ a FreeCAD webes munkaasztal helyett Use sketches for walls - Use sketches for walls + Használjon vázlatokat falakhoz Pipe diameter - Pipe diameter + Csőátmérő Rebar diameter - Rebar diameter + Betonacél átmérő Rebar offset - Rebar offset + Betonacél kiosztás Stair length - Stair length + Lépcső hossz Stair width - Stair width + Lépcső szélesség Stair height - Stair height + Lépcső magasság Number of stair steps - Number of stair steps + Lépcsők száma @@ -1283,8 +1283,8 @@ Az 'Épületek' és az 'Emeletek' még mindig importálva vannak, ha egynél tö DAE - + Export options Exportálási beállítások @@ -1736,40 +1736,40 @@ kiválasszák a mértékegységet a fájl megnyitásakor. Rajzolási mód - - + + Category Kategória - - - + + + Preset Előre beállított - - - - + + + + Length Hossz - - + + Width Szélesség - + Height Magasság @@ -1785,8 +1785,8 @@ kiválasszák a mértékegységet a fájl megnyitásakor. Kapcsoló H/SZ - + Con&tinue Folytatás @@ -1803,8 +1803,8 @@ kiválasszák a mértékegységet a fájl megnyitásakor. Ez a háló egy érvénytelen szilárd test - + Facemaker returned an error Felületlétrehozás hibával tért vissza @@ -1917,8 +1917,8 @@ kiválasszák a mértékegységet a fájl megnyitásakor. Kész - + Couldn't compute a shape Nem tudott kiszámítani egy alakzatot @@ -2088,25 +2088,25 @@ A hely létrehozása megszakadt. - + Unable to create a roof Tető nem hozható létre - + Please select a base object Kérjük válassza ki az alap tárgyat - + Roof Tető - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2131,37 +2131,37 @@ Ha szög = 0, akkor a szöget úgy kell kiszámítani, hogy a magasság megegyez Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság megegyezik a relatív profillal. - + Id Azonosító - + Angle (deg) Szög (fok) - + Run (mm) Futás (mm) - + IdRel IdRel - + Thickness (mm) Vastagság (mm) - + Overhang (mm) Túlnyúlás (mm) - + Height (mm) Magasság (mm) @@ -2173,27 +2173,27 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Opening - Opening + Nyílás Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Válasszon ki két tárgyat, egy vágandó tárgyat és egy vágási síkot meghatározó tárgyat, ebben a sorrendben The first object does not have a shape - The first object does not have a shape + Az első tárgynak nincs alakja The second object does not define a plane - The second object does not define a plane + A második tárgy nem határoz meg síkot @@ -2396,37 +2396,37 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Véletlenszerűen kiválasztott - - + + Remove Törlés - - + + Add Hozzáad - - - - + + + + - + - - + + Edit Szerkesztés @@ -2447,8 +2447,8 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Drótvázak - + Components Összetevők @@ -2458,30 +2458,30 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Új összetevő létrehozásához - + Name Név - - + + Type Típus - + Thickness Vastagság - + Offset Eltolás @@ -2549,9 +2549,9 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Kérlek válassz legalább egy tengelyt - + Axes Tengelyek @@ -2563,9 +2563,9 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m - + Successfully written Sikeresen kiírva @@ -2575,8 +2575,8 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Kereszttartó - + Please select only one base object or none Csak egy alaptárgyat jelöljön ki, vagy egyiket sem @@ -3130,24 +3130,24 @@ Ha Futás = 0, akkor a futás kiszámítása úgy történik, hogy a magasság m Ismeretlen file-típus + - Description Leírás + + - - Value Érték + - Unit Egység @@ -3243,19 +3243,19 @@ Szint létrehozása megszakítva. van egy érvénytelen alakzat + - has a null shape van egy nulla alakja - + Toggle subcomponents Al összetevők ki-/ bekapcsolása @@ -3265,8 +3265,8 @@ Szint létrehozása megszakítva. Vázlat szerkesztés bezárása - + Component Összetevő @@ -3463,8 +3463,8 @@ Szint létrehozása megszakítva. Sík középpontja a fenti listában szereplő tárgyakon - + Building Épület @@ -3843,14 +3843,14 @@ Building creation aborted. Alap forgás a szerszámtengely körül (csak akkor használható, ha a BasePerpendicularTool igaz) - + The length of this element, if not based on a profile Ennek az elemnek a hossza, ha nem profilon áll - + The width of this element, if not based on a profile Ennek az elemnek a szélessége, ha nem profilon áll @@ -3860,15 +3860,15 @@ Building creation aborted. Ez az elem magassága vagy kihúzás nagysága. 0 megtartása automatikushoz - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ennek a tárgynak az aktuális kihúzás iránya (automatikus normál (0,0,0) megtartása) - + The structural nodes of this element Ennek az elemnek a szerkezeti csomópontjai @@ -3883,8 +3883,8 @@ Building creation aborted. A középtengely és az egyenes csomópontok közti eltolás - + The facemaker type to use to build the profile of this object Ennek a tárgynak a felület profiljához használt felületlétrehozó típus @@ -3961,9 +3961,9 @@ Building creation aborted. Ehhez az eszközhöz szükséges elektromos áram Wattban + - The type of this building Ennek az épületnek a típusa @@ -4282,20 +4282,20 @@ Building creation aborted. Egy URL-cím ami leképzett weboldalon jeleníti meg ezt az oldalt - + Other shapes that are appended to this object Ehhez a tárgyhoz csatolt egyéb alakzatok - + Other shapes that are subtracted from this object Ebből a tárgyból kivált egyéb alakzatok - + The area of the projection of this object onto the XY plane Ennek a tárgynak az XY síkra vetített vetületének területe @@ -4330,8 +4330,8 @@ Building creation aborted. A modell (0,0,0) eredetű és a geo-koordináták által megjelölt pont közötti választható eltolás - + The type of this object Ennek a tárgynak a típusa @@ -4445,6 +4445,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Megadja, hogy a tető irányát tükrözni kell-e + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6761,9 +6766,9 @@ Building creation aborted. Command - - + + Transform Átalakítás diff --git a/src/Mod/Arch/Resources/translations/Arch_id.qm b/src/Mod/Arch/Resources/translations/Arch_id.qm index 0bff6a849f..4c091610db 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_id.qm and b/src/Mod/Arch/Resources/translations/Arch_id.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index 85ea9d1922..50b520576c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -1276,8 +1276,8 @@ are placed in a 'Group' instead. DAE - + Export options Pilihan ekspor @@ -1730,40 +1730,40 @@ unit untuk digunakan saat membuka file. Mode Drawing - - + + Category Kategori - - - + + + Preset Preset - - - - + + + + Length Panjangnya - - + + Width Lebar - + Height Tinggi @@ -1779,8 +1779,8 @@ unit untuk digunakan saat membuka file. Beralih L/W - + Con&tinue Melanjutkan @@ -1797,8 +1797,8 @@ unit untuk digunakan saat membuka file. Mesh ini adalah solid yang tidak valid - + Facemaker returned an error Facemaker mengembalikan sebuah kesalahan @@ -1911,8 +1911,8 @@ unit untuk digunakan saat membuka file. Selesai - + Couldn't compute a shape Tidak dapat menghitung bentuk @@ -2082,25 +2082,25 @@ Pembuatan situs dibatalkan. - + Unable to create a roof Tidak dapat membuat sebuah atap - + Please select a base object Mohon pilih sebuah objek dasar - + Roof Atap - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2115,37 +2115,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Parameter profil atap: * Sudut: kemiringan dalam derajat dibandingkan dengan yang horisontal. * Run: outdistance antara dinding dan selubung punggungan. * Tebal: ketebalan sisi atap. * Overhang : outdistance antara selokan dan dinding. Tinggi: tinggi selubung punggungan (dihitung secara otomatis) IdRel: Id Relatif untuk perhitungan otomatis. --- Jika Angle = 0 dan Run = 0 maka profilnya identik dengan profil relatif. Jika Angle = 0 maka sudutnya dihitung sehingga tingginya sama dengan profil relatif. Jika Run = 0 maka Run dihitung sehingga tingginya sama dengan profil relatif. - + Id Id - + Angle (deg) Sudut (deg) - + Run (mm) Jalankan (mm) - + IdRel IdRel - + Thickness (mm) Ketebalan (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Tinggi (mm) @@ -2380,37 +2380,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Pilih yang dipilih - - + + Remove Menghapus - - + + Add Menambahkan - - - - + + + + - + - - + + Edit Edit @@ -2431,8 +2431,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Kawat - + Components Komponen @@ -2442,30 +2442,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Nama - - + + Type Jenis - + Thickness Thickness - + Offset Mengimbangi @@ -2533,9 +2533,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Silakan pilih setidaknya satu sumbu - + Axes Sumbu @@ -2547,9 +2547,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Berhasil ditulis @@ -2559,8 +2559,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3114,24 +3114,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Description + + - - Value Nilai + - Unit Satuan @@ -3227,19 +3227,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3249,8 +3249,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3447,8 +3447,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Bangunan @@ -3827,14 +3827,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3844,15 +3844,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3867,8 +3867,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3945,9 +3945,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4266,20 +4266,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4314,8 +4314,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4429,6 +4429,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6745,9 +6750,9 @@ Building creation aborted. Command - - + + Transform Transform diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index 6ac69a29c2..010612d476 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 18594d8aa1..e821b403d6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -900,7 +900,7 @@ instead of the FreeCAD web workbench Wall color - Wall color + Colore della parete @@ -915,7 +915,7 @@ instead of the FreeCAD web workbench Window glass transparency - Window glass transparency + Trasparenza vetro della finestra @@ -926,12 +926,12 @@ instead of the FreeCAD web workbench Window glass color - Window glass color + Colore vetro della finestra Panel color - Panel color + Colore pannello @@ -981,12 +981,12 @@ instead of the FreeCAD web workbench Use sketches for walls - Use sketches for walls + Usa schizzi per le pareti Pipe diameter - Pipe diameter + Diametro del tubo @@ -1001,22 +1001,22 @@ instead of the FreeCAD web workbench Stair length - Stair length + Lunghezza scala Stair width - Stair width + Larghezza scala Stair height - Stair height + Altezza scala Number of stair steps - Number of stair steps + Numero di gradini @@ -1274,8 +1274,8 @@ are placed in a 'Group' instead. DAE - + Export options Opzioni di esportazione @@ -1722,40 +1722,40 @@ unit to work with when opening the file. Modalità di disegno - - + + Category Categoria - - - + + + Preset Predefinito - - - - + + + + Length Lunghezza - - + + Width Larghezza - + Height Altezza @@ -1771,8 +1771,8 @@ unit to work with when opening the file. Scambia L/W - + Con&tinue Con&tinua @@ -1789,8 +1789,8 @@ unit to work with when opening the file. Questa mesh non è un solido valido - + Facemaker returned an error FaceMaker ha restituito un errore @@ -1903,8 +1903,8 @@ unit to work with when opening the file. Fatto - + Couldn't compute a shape Impossibile calcolare una forma @@ -2074,25 +2074,25 @@ Creazione del Sito interrotta. - + Unable to create a roof Impossibile creare un tetto - + Please select a base object Selezionare un oggetto base - + Roof Tetto - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2117,37 +2117,37 @@ Se Angolo = 0 allora l'angolo viene calcolato in modo che l'altezza sia uguale a Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa del profilo relativo. - + Id Id - + Angle (deg) Angolo (gradi) - + Run (mm) Lunghezza (mm) - + IdRel IdRel - + Thickness (mm) Spessore (mm) - + Overhang (mm) Sbalzo (mm) - + Height (mm) Altezza (mm) @@ -2159,27 +2159,27 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Opening - Opening + Apertura Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + Seleziona due oggetti, un oggetto da tagliare e un oggetto che definisce un piano di taglio, in quell'ordine The first object does not have a shape - The first object does not have a shape + Il primo oggetto non ha una forma The second object does not define a plane - The second object does not define a plane + Il secondo oggetto non definisce un piano @@ -2382,37 +2382,37 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Usa selezionata - - + + Remove Rimuovi - - + + Add Aggiungi - - - - + + + + - + - - + + Edit Modifica @@ -2433,8 +2433,8 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Polilinee - + Components Componenti @@ -2444,30 +2444,30 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Crea un nuovo componente - + Name Nome - - + + Type Tipo - + Thickness Spessore - + Offset Offset @@ -2535,9 +2535,9 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Selezionare almeno un asse - + Axes Assi @@ -2549,9 +2549,9 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d - + Successfully written Scritto correttamente @@ -2561,8 +2561,8 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Travatura - + Please select only one base object or none Si prega di selezionare un solo oggetto base o nessuno @@ -3116,24 +3116,24 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d Impossibile riconoscere quel tipo di file + - Description Descrizione + + - - Value Valore + - Unit Unità @@ -3229,19 +3229,19 @@ Creazione del Piano interrotta. ha una forma non valida + - has a null shape ha una forma nulla - + Toggle subcomponents Attiva/disattiva sottocomponenti @@ -3251,8 +3251,8 @@ Creazione del Piano interrotta. Chiudi modifica Sketch - + Component Componente @@ -3449,8 +3449,8 @@ Creazione del Piano interrotta. Centra il piano sugli oggetti nella lista precedente - + Building Edificio @@ -3829,14 +3829,14 @@ Creazione Edificio interrotta. Rotazione della Base attorno all'asse dello Strumento (usata solo se BasePerpendicularToTool è Vero) - + The length of this element, if not based on a profile La lunghezza di questo elemento, se non è basato su un profilo - + The width of this element, if not based on a profile La larghezza di questo elemento, se non è basato su un profilo @@ -3846,15 +3846,15 @@ Creazione Edificio interrotta. L'altezza o la profondità di estrusione di questo elemento. Lasciare 0 per automatico - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The structural nodes of this element I nodi strutturali di questo elemento @@ -3869,8 +3869,8 @@ Creazione Edificio interrotta. Distanza di offset tra la linea centrale e la linea dei nodi - + The facemaker type to use to build the profile of this object Il tipo di Crea facce da utilizzare per creare il profilo di questo oggetto @@ -3947,9 +3947,9 @@ Creazione Edificio interrotta. L'energia richiesta da questa apparecchiatura in watt + - The type of this building Il tipo di questo edificio @@ -4268,20 +4268,20 @@ Creazione Edificio interrotta. Un URL che mostra questo sito in un sito di mappatura - + Other shapes that are appended to this object Altre forme che vengono aggiunte a questo oggetto - + Other shapes that are subtracted from this object Altre forme che sono sottratte da questo oggetto - + The area of the projection of this object onto the XY plane L'area della proiezione di questo oggetto sul piano XY @@ -4316,8 +4316,8 @@ Creazione Edificio interrotta. Scostamento facoltativo tra l'origine del modello (0,0,0) e il punto indicato dalle geocoordinate - + The type of this object Il tipo di questo oggetto @@ -4431,6 +4431,11 @@ Creazione Edificio interrotta. Specifies if the direction of the roof should be flipped Specifica se la direzione del tetto deve essere capovolta + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6747,9 +6752,9 @@ Creazione Edificio interrotta. Command - - + + Transform Trasforma diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.qm b/src/Mod/Arch/Resources/translations/Arch_ja.qm index a588fb26a1..822035de20 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ja.qm and b/src/Mod/Arch/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 809af5b0d8..092662d62f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -1275,8 +1275,8 @@ are placed in a 'Group' instead. DAE - + Export options エクスポート・オプション @@ -1721,40 +1721,40 @@ unit to work with when opening the file. Drawing mode - - + + Category カテゴリ - - - + + + Preset Preset - - - - + + + + Length 長さ - - + + Width 幅 - + Height 高さ @@ -1770,8 +1770,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1788,8 +1788,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1902,8 +1902,8 @@ unit to work with when opening the file. 終了 - + Couldn't compute a shape Couldn't compute a shape @@ -2073,25 +2073,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2116,37 +2116,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2381,37 +2381,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela ピック選択 - - + + Remove 削除 - - + + Add 追加 - - - - + + + + - + - - + + Edit 編集 @@ -2432,8 +2432,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components コンポーネント @@ -2443,30 +2443,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name 名前 - - + + Type タイプ - + Thickness 厚み - + Offset オフセット @@ -2534,9 +2534,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2548,9 +2548,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2560,8 +2560,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3115,24 +3115,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description 説明 + + - - Value 値 + - Unit 単位 @@ -3228,19 +3228,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3250,8 +3250,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3448,8 +3448,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building ビルディング @@ -3828,14 +3828,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3845,15 +3845,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3868,8 +3868,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3946,9 +3946,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4267,20 +4267,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4315,8 +4315,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4430,6 +4430,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6746,9 +6751,9 @@ Building creation aborted. Command - - + + Transform 変換 diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.qm b/src/Mod/Arch/Resources/translations/Arch_ka.qm index cb713667fe..f38e24f8fd 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ka.qm and b/src/Mod/Arch/Resources/translations/Arch_ka.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts index 53644c1926..cfea2bdc5e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ka.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts @@ -751,17 +751,17 @@ Leave blank to use all objects from the document Join base sketches of walls if possible - Join base sketches of walls if possible + კედლების საბაზისო ესკიზების შეერთება, თუ ეს შესაძლებელია Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + საჭიროების შემთხვევაში საბაზისო ესკიზებიდან გარე გეომეტრიის მოცილება Do not compute areas for objects with more than - Do not compute areas for objects with more than + არ გამოთვალოთ ფართობი ობიექტებისთვის, რომლის მნიშვნელობაც აღემატება @@ -903,22 +903,22 @@ Bim სერვერის ინტერფეისს გარე ბრ Wall color - Wall color + კედლის ფერი Structure color - Structure color + სტრუქტურის ფერი Rebar color - Rebar color + არმატურის ფერი Window glass transparency - Window glass transparency + ფანჯრის მინის გამჭვირვალობა @@ -929,27 +929,27 @@ Bim სერვერის ინტერფეისს გარე ბრ Window glass color - Window glass color + ფანჯრის მინის ფერი Panel color - Panel color + პანელის ფერი Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + დამხმარის ფერები (ბადები, ცულები და ა. შ.) Space transparency - Space transparency + სივრცის გამჭვირვალობა Space line style - Space line style + სივრცის ხაზის სტილი @@ -974,7 +974,7 @@ Bim სერვერის ინტერფეისს გარე ბრ Space line color - Space line color + სივრცის ხაზის ფერი @@ -984,42 +984,42 @@ Bim სერვერის ინტერფეისს გარე ბრ Use sketches for walls - Use sketches for walls + ესკიზების გამოყენება კედლებისთვის Pipe diameter - Pipe diameter + მილის დიამეტრი Rebar diameter - Rebar diameter + არმატურის დიამეტრი Rebar offset - Rebar offset + არმატურის წანაცვლება Stair length - Stair length + კიბის სიგრძე Stair width - Stair width + კიბის სიგანე Stair height - Stair height + კიბის სიმაღლე Number of stair steps - Number of stair steps + კიბის საფეხურების რაოდენობა @@ -1275,8 +1275,8 @@ are placed in a 'Group' instead. DAE - + Export options გატანის პარამეტრები @@ -1719,40 +1719,40 @@ unit to work with when opening the file. ხაზვის რეჟიმი - - + + Category კატეგორია - - - + + + Preset პრესეტი - - - - + + + + Length სიგრძე - - + + Width სიგანე - + Height სიმაღლე @@ -1768,8 +1768,8 @@ unit to work with when opening the file. სიგრძე/სიგანის გადამრთველი - + Con&tinue გაგრძ&ელება @@ -1786,8 +1786,8 @@ unit to work with when opening the file. ეს პოლიხაზი არ წარმოადგენს შეკრულ სხეულს - + Facemaker returned an error Facemaker-მა დააბრუნა შეცდომა @@ -1900,8 +1900,8 @@ unit to work with when opening the file. დასრულებულია - + Couldn't compute a shape ფიგურის გამოთვლის შეცდომა @@ -2071,25 +2071,25 @@ Site creation aborted. - + Unable to create a roof სახურავის შექმნა შეუძლებელია - + Please select a base object გთხოვთ, აირჩიოთ საბაზისო ობიექტი - + Roof სახურავი - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2114,37 +2114,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela თუ Run = 0, მაშინ ღრიჭო გამოითვლება ისე, რომ სიმაღლე იყოს იგივე, რაც ფარდობითი პროფილი. - + Id Id - + Angle (deg) კუთხე (გრად) - + Run (mm) ღრიჭო (მმ) - + IdRel IdRel - + Thickness (mm) სისქე (მმ) - + Overhang (mm) შვერილი (მმ) - + Height (mm) სიმაღლე (მმ) @@ -2156,27 +2156,27 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Opening - Opening + ღიობი Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order + აირჩიეთ ორი ობიექტი, ობიექტი, რომლის გაჭრაც გნებავთ და ობიექტი, რომელიც გაჭრის სიბრტყეს განსაზღვრავს, ამ მიმდევრობით The first object does not have a shape - The first object does not have a shape + პირველ ობიექტს მოხაზულობა არ გააჩნია The second object does not define a plane - The second object does not define a plane + მეორე ობიექტი სიბრტყეს არ აღწერს @@ -2379,37 +2379,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela მონიშნულის არჩევა - - + + Remove წაშლა - - + + Add დამატება - - - - + + + + - + - - + + Edit ჩასწორება @@ -2430,8 +2430,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela პოლიხაზები - + Components კომპონენტები @@ -2441,30 +2441,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela ახალი კომპონენტის შექმნა - + Name სახელი - - + + Type ტიპი - + Thickness სისქე - + Offset წანაცვლება @@ -2532,9 +2532,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela აირჩიეთ ერთი ღერძი მაინც - + Axes ღერძები @@ -2546,9 +2546,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written წარმატებით ჩაიწერა @@ -2558,8 +2558,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela ფერმა - + Please select only one base object or none გთხოვთ, აირჩიოთ მხოლოდ ერთი საბაზისო ობიექტი ან არცერთი @@ -3113,24 +3113,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela უცნობი ფაილის ტიპი + - Description აღწერა + + - - Value მნიშვნელობა + - Unit საზომი ერთეულები @@ -3226,19 +3226,19 @@ Floor creation aborted. აქვს არასწორი ფორმა + - has a null shape აქვს ცარიელი ფორმა - + Toggle subcomponents ქვეკომპონენტების ჩართ/გამორთ @@ -3248,8 +3248,8 @@ Floor creation aborted. ესკიზის ჩასწორების დახურვა - + Component კომპონენტი @@ -3446,8 +3446,8 @@ Floor creation aborted. სიბრტყის ზემოთ მოცემულ სიაში არსებულ ობიექტებზე დაცენტრება - + Building შენობა @@ -3826,14 +3826,14 @@ Building creation aborted. ბაზის მოტრიალება ხელსაწყოს ღერძის გარშემო (გამოიყენება მხოლოდ თუ BasePerpendicularToTool დაყენებულია "True"-ზე) - + The length of this element, if not based on a profile ამ ელემენტის სიგრძე, თუ არ არის დაფუძნებული პროფილზე - + The width of this element, if not based on a profile ამ ელემენტის სიგანე, თუ არ არის დაფუძნებული პროფილზე @@ -3843,15 +3843,15 @@ Building creation aborted. ამ ელემენტის სიმაღლე ან გამოწნევის სიღრმე. ავტომატური მნიშვნელობისთვის დატოვეთ 0 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) ამ ობიექტის ნორმალის გამოწნეხვის მიმართულება (ავტომატური ნორმალისთვის დატოვეთ (0,0,0)) - + The structural nodes of this element ამ ელემენტის სტრუქტურული კვანძები @@ -3866,8 +3866,8 @@ Building creation aborted. ცენტრალურ ხაზსა და საკვანძო ხაზს შორის წანაცვლებული მანძილი - + The facemaker type to use to build the profile of this object ობიექტის პროფილის შესაქმნელად გამოსაყენებელი facemaker-ის ტიპი @@ -3944,9 +3944,9 @@ Building creation aborted. ამ აღჭურვილობისთვის საჭირო ელექტროენერგია ვატებში + - The type of this building შენობის ტიპი @@ -4265,20 +4265,20 @@ Building creation aborted. URL, რომელიც ამ ადგილს რუკის ვებგვერდზე აჩვენებს - + Other shapes that are appended to this object სხვა ფორმები, რომლებიც დართულია ამ ობიექტზე - + Other shapes that are subtracted from this object სხვა ფორმები, რომლებიც გამოაკლდა ამ ობიექტს - + The area of the projection of this object onto the XY plane ამ ობიექტის პროექციის ფართობი XY სიბრტყეზე @@ -4313,8 +4313,8 @@ Building creation aborted. არასავალდებულო წანაცვლება მოდელის (0,0,0) საწყისსა და გეოკოორდინატებით მითითებულ წერტილს შორის - + The type of this object ობიექტის ტიპი @@ -4428,6 +4428,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped განსაზღვრავს, სახურავის მიმართულება უნდა გადაბრუნეს თუ არა + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6750,9 +6755,9 @@ Building creation aborted. Command - - + + Transform გარდაქმნა diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.qm b/src/Mod/Arch/Resources/translations/Arch_ko.qm index e0fccb2bc2..0f0dfd8818 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ko.qm and b/src/Mod/Arch/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index e43dd0771f..90418c9383 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -1276,8 +1276,8 @@ are placed in a 'Group' instead. DAE - + Export options 내보내기 옵션 @@ -1718,40 +1718,40 @@ IFC 파일은 "항상" 메트릭 단위로 작성됩니다. 임페리얼 단위 그리기 모드 - - + + Category 카테고리 - - - + + + Preset 프리셋 - - - - + + + + Length 거리 - - + + Width 너비 - + Height 높이 @@ -1767,8 +1767,8 @@ IFC 파일은 "항상" 메트릭 단위로 작성됩니다. 임페리얼 단위 L/W 전환 - + Con&tinue 계속 @@ -1785,8 +1785,8 @@ IFC 파일은 "항상" 메트릭 단위로 작성됩니다. 임페리얼 단위 이 메시는 유효하지 않은 솔리드입니다 - + Facemaker returned an error 페이스메이커가 오류를 반환했습니다 @@ -1899,8 +1899,8 @@ IFC 파일은 "항상" 메트릭 단위로 작성됩니다. 임페리얼 단위 완료 - + Couldn't compute a shape 모양을 계산할 수 없습니다 @@ -2070,25 +2070,25 @@ Site creation aborted. - + Unable to create a roof 지붕을 만들 수 없습니다 - + Please select a base object 기본 객체를 선택 하십시오 - + Roof 지붕 - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2113,37 +2113,37 @@ Angle = 0인 경우 Height가 상대 프로파일과 동일하도록 Angle이 Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산됩니다. - + Id Id - + Angle (deg) 각도 (도) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) 두께(mm) - + Overhang (mm) 내물림(mm) - + Height (mm) 높이(mm) @@ -2379,37 +2379,37 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 선택 - - + + Remove 제거 - - + + Add 추가하기 - - - - + + + + - + - - + + Edit 편집 @@ -2430,8 +2430,8 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 와이어 - + Components 구성 요소 @@ -2441,30 +2441,30 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 새 구성 요소 만들기 - + Name 이름 - - + + Type 유형 - + Thickness 두께 - + Offset 오프셋 @@ -2532,9 +2532,9 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 축을 하나 이상 선택하십시오 - + Axes 축 @@ -2546,9 +2546,9 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 - + Successfully written 작성을 성공했습니다 @@ -2558,8 +2558,8 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 트러스 - + Please select only one base object or none 기본 객체를 하나만 선택하거나 선택하지 마십시오 @@ -3113,24 +3113,24 @@ Run = 0인 경우 Height가 상대 프로파일과 동일하도록 Run이 계산 해당 파일 형식을 인식할 수 없음 + - Description 설명 + + - - Value 값 + - Unit 단위 @@ -3226,19 +3226,19 @@ Floor creation aborted. 유효하지 않은 도형이 있습니다 + - has a null shape 널 모양이 있습니다 - + Toggle subcomponents 하위 구성요소 전환 @@ -3248,8 +3248,8 @@ Floor creation aborted. 스케치 편집 종료 - + Component 구성 요소 @@ -3446,8 +3446,8 @@ Floor creation aborted. 위 목록의 객체에 맞게 평면을 중앙에 맞춥니다. - + Building 빌딩 @@ -3826,14 +3826,14 @@ Building creation aborted. 공구 축을 중심으로 한 베이스 회전(BasePerpendicularToTool 이 참인 경우에만 사용) - + The length of this element, if not based on a profile 프로파일에서 지원하지 않는 경우, 엘리먼트의 길이임. - + The width of this element, if not based on a profile 프로파일에서 지원하지 않는 경우, 엘리먼트의 폭임. @@ -3843,15 +3843,15 @@ Building creation aborted. 엘리먼트의 높이 또는 돌출 깊이, 자동은 0를 유지합니다. - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 객체의 일반적인 돌출 방향(자동의 경우 (0,0,0) 를 유지) - + The structural nodes of this element 이 원소의 구조적 노드 @@ -3866,8 +3866,8 @@ Building creation aborted. 중심선과 노드 선 사이의 오프셋 거리 - + The facemaker type to use to build the profile of this object 이 객체의 프로파일을 작성하는 데 사용할 페이스메이커 유형 @@ -3944,9 +3944,9 @@ Building creation aborted. 이 장비에 필요한 와트 단위 전력 + - The type of this building 건물의 종류 @@ -4265,20 +4265,20 @@ Building creation aborted. 매핑 웹 사이트에 이 사이트를 표시하는 URL - + Other shapes that are appended to this object 이 객체에 덧붙인 다른 모양 - + Other shapes that are subtracted from this object 이 객체에서 뺀 다른 모양 - + The area of the projection of this object onto the XY plane XY 평면 위에 이 오브젝트의 투영 면적 @@ -4313,8 +4313,8 @@ Building creation aborted. 모형 (0,0,0) 원점과 지오 좌표로 표시된 점 사이의 선택적 오프셋 - + The type of this object 이 객체의 유형 @@ -4428,6 +4428,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped 지붕 방향을 뒤집어야 하는지 여부를 지정합니다 + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6744,9 +6749,9 @@ Building creation aborted. Command - - + + Transform 변환하기 diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.qm b/src/Mod/Arch/Resources/translations/Arch_nl.qm index c83eddead3..c9227ff17c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_nl.qm and b/src/Mod/Arch/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index aa1504413b..12fadebfb9 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -1279,8 +1279,8 @@ are placed in a 'Group' instead. DAE - + Export options Exportopties @@ -1730,40 +1730,40 @@ Echter, sommige BIM programma's zullen deze conversie factor gebruiken bij het k Tekenmodus - - + + Category Categorie - - - + + + Preset Voorinstelling - - - - + + + + Length Lengte - - + + Width Breedte - + Height Hoogte @@ -1779,8 +1779,8 @@ Echter, sommige BIM programma's zullen deze conversie factor gebruiken bij het k Switch L/W - + Con&tinue Con&tinue @@ -1797,8 +1797,8 @@ Echter, sommige BIM programma's zullen deze conversie factor gebruiken bij het k Dit net vormt een ongeldige solid - + Facemaker returned an error Facemaker gaf een foutmelding @@ -1911,8 +1911,8 @@ Echter, sommige BIM programma's zullen deze conversie factor gebruiken bij het k Klaar - + Couldn't compute a shape Kon geen vorm berekenen @@ -2081,25 +2081,25 @@ Bouwterrein object wordt niet gemaakt. - + Unable to create a roof Onmogelijk om een dak te maken - + Please select a base object Selecteer een basisobject - + Roof Dak - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2124,37 +2124,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Hoek (graden) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Dikte (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Hoogte (mm) @@ -2389,37 +2389,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Kies geselecteerde - - + + Remove Verwijderen - - + + Add Toevoegen - - - - + + + + - + - - + + Edit Bewerken @@ -2440,8 +2440,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Draden - + Components Onderdelen @@ -2451,30 +2451,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Maak een nieuw onderdeel - + Name Naam - - + + Type Type - + Thickness Dikte - + Offset Verschuiving @@ -2542,9 +2542,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Assen @@ -2556,9 +2556,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Met succes geschreven @@ -2568,8 +2568,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3123,24 +3123,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Omschrijving + + - - Value Waarde + - Unit Eenheid @@ -3236,19 +3236,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3258,8 +3258,8 @@ Floor creation aborted. Closing Sketch edit - + Component Onderdeel @@ -3456,8 +3456,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Gebouw @@ -3836,14 +3836,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3853,15 +3853,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3876,8 +3876,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3954,9 +3954,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4275,20 +4275,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4323,8 +4323,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object Het type van dit object @@ -4438,6 +4438,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6754,9 +6759,9 @@ Building creation aborted. Command - - + + Transform Transformeren diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index 40cc861a64..d73ec70cfd 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index 65118ec4e4..bff325e520 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -759,17 +759,17 @@ co może powodować powstawanie szczelin i obiektów nie bryłowych Join base sketches of walls if possible - Join base sketches of walls if possible + Dołącz do podstawowych szkiców ścian, jeśli to możliwe Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + W razie potrzeby usuń geometrię zewnętrzną szkiców bazowych Do not compute areas for objects with more than - Do not compute areas for objects with more than + Nie obliczaj obszarów dla obiektu, z więcej niż @@ -916,22 +916,22 @@ wyrażona w jednostkach wewnętrznych (milimetrach) Wall color - Wall color + Kolor ściany Structure color - Structure color + Kolor dla konstrukcji Rebar color - Rebar color + Kolor zbrojenia Window glass transparency - Window glass transparency + Przezroczystość szkła w oknie @@ -942,27 +942,27 @@ wyrażona w jednostkach wewnętrznych (milimetrach) Window glass color - Window glass color + Kolor dla szkła w oknie Panel color - Panel color + Kolor panelu Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Kolor dla elementów pomocniczych (siatki, osi, itp.) Space transparency - Space transparency + Przezroczystość przestrzeni Space line style - Space line style + Styl linii dla przestrzeni @@ -987,52 +987,52 @@ wyrażona w jednostkach wewnętrznych (milimetrach) Space line color - Space line color + Kolor linii dla przestrzeni Other - Inne + Inny Use sketches for walls - Use sketches for walls + Użyj szkiców do ścian Pipe diameter - Pipe diameter + Średnica rury Rebar diameter - Rebar diameter + Średnica pręta Rebar offset - Rebar offset + Otulina pręta Stair length - Stair length + Długość schodów Stair width - Stair width + Szerokość schodów Stair height - Stair height + Wysokość schodów Number of stair steps - Number of stair steps + Liczba stopni schodów @@ -1292,8 +1292,8 @@ umieszczone w grupie. Budynki i kondygnacje są nadal importowane, jeśli jest i DAE - + Export options Opcje eksportu @@ -1746,40 +1746,40 @@ które pozwalają na wybór systemu miar przy otwieraniu pliku. Tryb kreślenia - - + + Category Kategoria - - - + + + Preset Nastawa wstępna - - - - + + + + Length Długość - - + + Width Szerokość - + Height Wysokość @@ -1795,8 +1795,8 @@ które pozwalają na wybór systemu miar przy otwieraniu pliku. Przełącz długość / szerokość - + Con&tinue Kon&tynuuj @@ -1813,8 +1813,8 @@ które pozwalają na wybór systemu miar przy otwieraniu pliku. Ta siatka nie jest poprawną bryłą - + Facemaker returned an error Kreator ścian zwrócił błąd @@ -1927,8 +1927,8 @@ które pozwalają na wybór systemu miar przy otwieraniu pliku. Gotowe - + Couldn't compute a shape Nie można obliczyć kształtu @@ -2098,25 +2098,25 @@ Tworzenie terenu zostało przerwane. - + Unable to create a roof Nie można utworzyć dachu - + Please select a base object Wybierz obiekt bazowy - + Roof Dach - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2141,37 +2141,37 @@ Jeśli Kąt = 0, to kąt jest obliczany tak, aby wysokość była taka sama jak Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysokość była taka sama jak profil względny. - + Id Identyfikator - + Angle (deg) Kąt (stopnie) - + Run (mm) Uruchom (mm) - + IdRel IdRel - + Thickness (mm) Grubość (mm) - + Overhang (mm) Nawis (mm) - + Height (mm) Wysokość (mm) @@ -2183,27 +2183,27 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Opening - Opening + Otwieranie Select two objects, an object to be cut and an object defining a cutting plane, in that order - Select two objects, an object to be cut and an object defining a cutting plane, in that order - + Wybierz dwa obiekty, w takiej kolejności: +obiekt do wycięcia i obiekt definiujący płaszczyznę cięcia. The first object does not have a shape - The first object does not have a shape + Pierwszy obiekt nie ma kształtu The second object does not define a plane - The second object does not define a plane + Drugi obiekt nie definiuje płaszczyzny @@ -2406,37 +2406,37 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Wybierz zaznaczone - - + + Remove Usuń - - + + Add Dodaj - - - - + + + + - + - - + + Edit Edytuj @@ -2457,8 +2457,8 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Polilinie - + Components Komponenty @@ -2468,30 +2468,30 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Utwórz nowy komponent - + Name Nazwa - - + + Type Typ - + Thickness Grubość - + Offset Odsunięcie @@ -2559,9 +2559,9 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Zaznacz przynajmniej jedną oś - + Axes Osie @@ -2573,9 +2573,9 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko - + Successfully written Zapisano pomyślnie @@ -2585,8 +2585,8 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Wiązar - + Please select only one base object or none Proszę wybrać tylko jeden obiekt bazowy lub nic @@ -3140,24 +3140,24 @@ Jeśli Rozpiętość = 0, wówczas Rozpiętość jest obliczana tak, aby wysoko Nie można rozpoznać typu pliku + - Description Opis + + - - Value Wartość + - Unit Jednostka @@ -3253,19 +3253,19 @@ Tworzenie piętra zostało przerwane. ma nieprawidłowy kształt + - has a null shape ma kształt zerowy - + Toggle subcomponents Przełącz komponenty podrzędne @@ -3275,8 +3275,8 @@ Tworzenie piętra zostało przerwane. Zamykanie edycji szkicu - + Component Komponent @@ -3473,8 +3473,8 @@ Tworzenie piętra zostało przerwane. Wyśrodkuje płaszczyznę na obiektach znajdujących się powyżej - + Building Budynek @@ -3853,14 +3853,14 @@ Tworzenie budynku zostało przerwane. Obrót bazy wokół osi narzędzia (używany, tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) - + The length of this element, if not based on a profile Długość tego elementu, jeśli nie jest oparta na profilu - + The width of this element, if not based on a profile Szerokość tego elementu, jeśli nie jest oparta na profilu @@ -3870,15 +3870,15 @@ Tworzenie budynku zostało przerwane. Wysokość lub głębokość wyciągnięcia tego elementu. Zostaw 0 dla automatycznej wartości - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Kierunek normalny wyciągnięcia tego obiektu (zostaw (0,0,0) dla automatycznego kierunku normalnego) - + The structural nodes of this element Węzły konstrukcyjne tego elementu @@ -3893,8 +3893,8 @@ Tworzenie budynku zostało przerwane. Odległość odsunięcia między linią środkową a linią węzłów - + The facemaker type to use to build the profile of this object Typ kreatora ścian używany do utworzenia profilu tego obiektu @@ -3971,9 +3971,9 @@ Tworzenie budynku zostało przerwane. Zapotrzebowanie na moc elektryczną osprzętu w Watach [W] + - The type of this building Typ tego budynku @@ -4292,20 +4292,20 @@ Tworzenie budynku zostało przerwane. Adres URL, który pokazuje tę lokalizację działki na mapie internetowej - + Other shapes that are appended to this object Inne kształty dołączone do obiektu - + Other shapes that are subtracted from this object Inne kształty odejmowane od obiektu - + The area of the projection of this object onto the XY plane Pole powierzchni rzutu tego obiektu na płaszczyznę XY @@ -4340,8 +4340,8 @@ Tworzenie budynku zostało przerwane. Opcjonalne odsunięcie między odniesieniem położenia modelu (0,0,0) a punktem wskazanym przez współrzędne geocentryczne - + The type of this object Typ tego obiektu @@ -4455,6 +4455,11 @@ Tworzenie budynku zostało przerwane. Specifies if the direction of the roof should be flipped Określa, czy należy odwrócić nachylenie dachu + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6771,9 +6776,9 @@ Tworzenie budynku zostało przerwane. Command - - + + Transform Przemieszczenie diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index ef8007236d..fab47fd9c6 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 6482023599..2fa77c4338 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -1273,8 +1273,8 @@ are placed in a 'Group' instead. DAE - + Export options Opções de Exportação @@ -1715,40 +1715,40 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Modo de desenho - - + + Category Categoria - - - + + + Preset Predefinição - - - - + + + + Length Comprimento - - + + Width Largura - + Height Altura @@ -1764,8 +1764,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Trocar L/W - + Con&tinue Continuar @@ -1782,8 +1782,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Esta malha não é um sólido válido - + Facemaker returned an error O FaceMaker retornou um erro @@ -1895,8 +1895,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Feito - + Couldn't compute a shape Não foi possível calcular uma forma. @@ -2060,25 +2060,25 @@ Criação de sítio abortada. - + Unable to create a roof Não foi possível criar um telhado - + Please select a base object Por favor, selecione um objeto de base - + Roof Telhado - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2103,37 +2103,37 @@ Se o ângulo = 0, ele será calculado de forma que a altura seja igual ao perfil Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do perfil relativo. - + Id Id - + Angle (deg) Ângulo (graus) - + Run (mm) Comprimento (mm) - + IdRel IdRel - + Thickness (mm) Espessura (mm) - + Overhang (mm) Beiral (mm) - + Height (mm) Altura (mm) @@ -2368,37 +2368,37 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Usar seleção - - + + Remove Remover - - + + Add Adicionar - - - - + + + + - + - - + + Edit Editar @@ -2419,8 +2419,8 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Arames - + Components Componentes @@ -2430,30 +2430,30 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Criar um novo componente - + Name Nome - - + + Type Tipo - + Thickness Espessura - + Offset Deslocamento @@ -2521,9 +2521,9 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Por favor, selecione pelo menos um eixo - + Axes Eixos @@ -2535,9 +2535,9 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per - + Successfully written Gravado com sucesso @@ -2547,8 +2547,8 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Treliça - + Please select only one base object or none Por favor selecione apenas um ou nenhum objeto @@ -3102,24 +3102,24 @@ Se a extensão = 0, ela será calculada de modo que a altura seja a mesma do per Não é possível reconhecer o tipo do arquivo + - Description Descrição + + - - Value Valor + - Unit Unidade @@ -3207,19 +3207,19 @@ Floor creation aborted. tem uma forma inválida + - has a null shape tem uma forma nula - + Toggle subcomponents Alternar subcomponentes @@ -3229,8 +3229,8 @@ Floor creation aborted. Fechar edição do Esboço - + Component Componente @@ -3427,8 +3427,8 @@ Floor creation aborted. Centraliza o plano na lista de objetos acima - + Building Edificação @@ -3801,14 +3801,14 @@ Criação de edifício abortada. Rotação da Base em torno do eixo da ferramenta (usado somente se BasePerpendicularToTool for Verdadeiro) - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado em um perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado em um perfil @@ -3818,15 +3818,15 @@ Criação de edifício abortada. A profundidade ou altura de extrusão deste elemento. Mantenha 0 para automático - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The structural nodes of this element Os nós estruturais deste elemento @@ -3841,8 +3841,8 @@ Criação de edifício abortada. A distância o eixo central e a linha de nós - + The facemaker type to use to build the profile of this object O tipo de gerador de faces a ser usado para construir o perfil deste objeto @@ -3919,9 +3919,9 @@ Criação de edifício abortada. A energia elétrica necessária para este equipamento em Watts + - The type of this building O tipo desta construção @@ -4240,20 +4240,20 @@ Criação de edifício abortada. Uma url que mostra este site em um site de mapeamento - + Other shapes that are appended to this object Outras formas que são acrescentadas a este objeto - + Other shapes that are subtracted from this object Outras formas que são subtraídas deste objeto - + The area of the projection of this object onto the XY plane A área da projeção deste objeto no plano XY @@ -4288,8 +4288,8 @@ Criação de edifício abortada. Um deslocamento opcional entre a origem do modelo (0,0,0) e o ponto indicado pelas coordenadas geográficas - + The type of this object O tipo deste objeto @@ -4403,6 +4403,11 @@ Criação de edifício abortada. Specifies if the direction of the roof should be flipped Especifica se a direção do telhado deve ser invertida + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6719,9 +6724,9 @@ Criação de edifício abortada. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index de07f071cc..69e098a9f6 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index 35202b8fcd..0b541eef4c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -1280,8 +1280,8 @@ são colocados num 'Grupo'. DAE - + Export options Opções de Exportação @@ -1728,40 +1728,40 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Modo de desenho - - + + Category Categoria - - - + + + Preset Predefinição - - - - + + + + Length Comprimento - - + + Width Largura - + Height Altura @@ -1777,8 +1777,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Trocar L/W - + Con&tinue Con&tinuar @@ -1795,8 +1795,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Esta malha é um sólido inválido - + Facemaker returned an error O Facemaker retornou um erro @@ -1909,8 +1909,8 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Concluído - + Couldn't compute a shape Não foi possível calcular uma forma @@ -2080,25 +2080,25 @@ Criação de site abortada. - + Unable to create a roof Não foi possível criar um telhado - + Please select a base object Por favor, selecione um objeto base - + Roof Telhado - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2123,37 +2123,37 @@ Se o ângulo = 0, então o ângulo é calculado de forma que a altura seja igual Se executar = 0, então a execução é calculada de modo que a altura seja a mesma do perfil relativo. - + Id Id - + Angle (deg) Ângulo (graus) - + Run (mm) Comprimento (água) (mm) - + IdRel IdRel - + Thickness (mm) Espessura (mm) - + Overhang (mm) Projeção do beirado (mm) - + Height (mm) Altura (mm) @@ -2388,37 +2388,37 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Usar seleção - - + + Remove Remover - - + + Add Adicionar - - - - + + + + - + - - + + Edit Editar @@ -2439,8 +2439,8 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Wires - + Components Componentes @@ -2450,30 +2450,30 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Criar novo componente - + Name Nome - - + + Type Tipo - + Thickness Espessura - + Offset Deslocamento paralelo @@ -2541,9 +2541,9 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Por favor, selecione pelo menos um eixo - + Axes Eixos @@ -2555,9 +2555,9 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me - + Successfully written Gravado com sucesso @@ -2567,8 +2567,8 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Treliça - + Please select only one base object or none Por favor, selecione apenas um objeto base ou nenhum @@ -3122,24 +3122,24 @@ Se executar = 0, então a execução é calculada de modo que a altura seja a me Não é possível reconhecer o tipo de arquivo + - Description Descrição + + - - Value Valor + - Unit Unidade @@ -3235,19 +3235,19 @@ Criação de piso abortada. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3257,8 +3257,8 @@ Criação de piso abortada. Closing Sketch edit - + Component Component @@ -3455,8 +3455,8 @@ Criação de piso abortada. Centers the plane on the objects in the list above - + Building Edifício @@ -3835,14 +3835,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3852,15 +3852,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3875,8 +3875,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3953,9 +3953,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4274,20 +4274,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4322,8 +4322,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4437,6 +4437,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6753,9 +6758,9 @@ Building creation aborted. Command - - + + Transform Transformar diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.qm b/src/Mod/Arch/Resources/translations/Arch_ro.qm index b89a66a734..20fa587b8a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ro.qm and b/src/Mod/Arch/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index e4b0d9b200..147c5246aa 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -1283,8 +1283,8 @@ sunt plasate în schimb într-un 'Grup'. DAE - + Export options Opţiunile de export @@ -1736,40 +1736,40 @@ unitate cu care să lucreze la deschiderea fișierului. Mod desenare - - + + Category Categorie - - - + + + Preset Presetare - - - - + + + + Length Lungime - - + + Width Lăţime - + Height Înălţime @@ -1785,8 +1785,8 @@ unitate cu care să lucreze la deschiderea fișierului. Comutare L/W - + Con&tinue Continuare @@ -1803,8 +1803,8 @@ unitate cu care să lucreze la deschiderea fișierului. Această plasă este un solid nevalid - + Facemaker returned an error Facemaker a returnat o eroare @@ -1916,8 +1916,8 @@ unitate cu care să lucreze la deschiderea fișierului. Gata - + Couldn't compute a shape Nu s-a putut calcula o formă @@ -2087,25 +2087,25 @@ Crearea site-ului a fost anulată. - + Unable to create a roof Nu pot crea acoperișul - + Please select a base object Selectați un obiect de bază - + Roof Acoperiș - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2130,37 +2130,37 @@ Dacă unghiul = 0, atunci unghiul este calculat astfel încât înălțimea să Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea să fie identică cu profilul relativ. - + Id Id - + Angle (deg) Unghiul (grade) - + Run (mm) Distanță (mm) - + IdRel IdRel - + Thickness (mm) Grosime (mm) - + Overhang (mm) Suprafață (mm) - + Height (mm) Înălţime (mm) @@ -2395,37 +2395,37 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Choix sélectionné - - + + Remove Elimină - - + + Add Adaugă - - - - + + + + - + - - + + Edit Editare @@ -2446,8 +2446,8 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Fir - + Components Componente @@ -2457,30 +2457,30 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Creează o componentă nouă - + Name Nume - - + + Type Tip - + Thickness Grosime - + Offset Compensare @@ -2548,9 +2548,9 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Selectați cel puțin o axă - + Axes Axe @@ -2562,9 +2562,9 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s - + Successfully written Scris cu succes @@ -2574,8 +2574,8 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Adevărat - + Please select only one base object or none Vă rugăm să selectaţi un singur obiect de bază sau niciunul @@ -3129,24 +3129,24 @@ Dacă rulează = 0, atunci rularea este calculată astfel încât înălțimea s Imposibil de recunoscut acest tip de fișier + - Description Descriere + + - - Value Valoare + - Unit Unitate @@ -3242,19 +3242,19 @@ Crearea etajelor a fost întreruptă. are o formă invalidă + - has a null shape are o formă nulă - + Toggle subcomponents Comutare subcomponente @@ -3264,8 +3264,8 @@ Crearea etajelor a fost întreruptă. Închide editarea schiței - + Component Componentă @@ -3462,8 +3462,8 @@ Crearea etajelor a fost întreruptă. Centrează planul pe obiectele din lista de mai sus - + Building Construcţia @@ -3842,14 +3842,14 @@ Crearea de construcții a fost întreruptă. Rotația de bază în jurul axei sculei (utilizată numai dacă BasePerpendicularTool este adevărat) - + The length of this element, if not based on a profile Lungimea acestui element, dacă nu este bazat pe un profil - + The width of this element, if not based on a profile Lățimea acestui element, dacă nu este bazat pe un profil @@ -3859,15 +3859,15 @@ Crearea de construcții a fost întreruptă. Înălțimea sau adâncimea de extrudare a acestui element. Păstrați 0 pentru automat - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Direcția normală de extrudare a acestui obiect (păstrează (0,0,0) pentru normalizare automată) - + The structural nodes of this element Nodurile structurale ale acestui element @@ -3882,8 +3882,8 @@ Crearea de construcții a fost întreruptă. Compensează distanța dintre linia centrală și linia de noduri - + The facemaker type to use to build the profile of this object Tipul de facemaker folosit pentru a construi profilul acestui obiect @@ -3960,9 +3960,9 @@ Crearea de construcții a fost întreruptă. Energia electrică necesară acestui echipament în wați + - The type of this building Tipul acestei clădiri @@ -4281,20 +4281,20 @@ Crearea de construcții a fost întreruptă. Un URL care afișează acest site într-un site de cartografiere - + Other shapes that are appended to this object Alte forme care sunt atașate la acest obiect - + Other shapes that are subtracted from this object Alte forme care sunt scăzute din acest obiect - + The area of the projection of this object onto the XY plane Suprafața proiecției acestui obiect în planul XY @@ -4329,8 +4329,8 @@ Crearea de construcții a fost întreruptă. Un opţional offset între originea modelului (0,0,0) şi punctul indicat de geocoordonate - + The type of this object Tipul acestui obiect @@ -4444,6 +4444,11 @@ Crearea de construcții a fost întreruptă. Specifies if the direction of the roof should be flipped Specifică dacă direcția acoperișului trebuie întoarsă + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6760,9 +6765,9 @@ Crearea de construcții a fost întreruptă. Command - - + + Transform Transformare diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index 581d46344d..db34108b08 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index ab70dd2774..d90a6956fd 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -750,17 +750,17 @@ Leave blank to use all objects from the document Join base sketches of walls if possible - Join base sketches of walls if possible + По возможности соедините базовые эскизы стен Remove external geometry of base sketches if needed - Remove external geometry of base sketches if needed + При необходимости удалите внешнюю геометрию базовых эскизов Do not compute areas for objects with more than - Do not compute areas for objects with more than + Не вычисляйте площади для объектов размером более для объекта с более чем @@ -900,22 +900,22 @@ instead of the FreeCAD web workbench Wall color - Wall color + Цвет стен Structure color - Structure color + Цвет структуры Rebar color - Rebar color + Цвет ребра Window glass transparency - Window glass transparency + Прозрачность стекла @@ -926,22 +926,22 @@ instead of the FreeCAD web workbench Window glass color - Window glass color + Цвет стекла Panel color - Panel color + Цвет грани Helper color (grids, axes, etc.) - Helper color (grids, axes, etc.) + Ориентиры цвета (сетки, оси и т. д.) Space transparency - Space transparency + Прозрачность пространства @@ -986,37 +986,37 @@ instead of the FreeCAD web workbench Pipe diameter - Pipe diameter + Диаметр трубы Rebar diameter - Rebar diameter + Диаметр ребра Rebar offset - Rebar offset + Смещение ребра Stair length - Stair length + Длина лестницы Stair width - Stair width + Ширина лестницы Stair height - Stair height + Высота лестницы Number of stair steps - Number of stair steps + Число ступеней @@ -1274,8 +1274,8 @@ are placed in a 'Group' instead. DAE - + Export options Параметры экспорта @@ -1714,40 +1714,40 @@ unit to work with when opening the file. Режим рисования - - + + Category Категория - - - + + + Preset Предустановка - - - - + + + + Length Длина - - + + Width Ширина - + Height Высота @@ -1763,8 +1763,8 @@ unit to work with when opening the file. Перекл. Длина/Высота - + Con&tinue &Продолжить @@ -1781,8 +1781,8 @@ unit to work with when opening the file. Эта сетка является недействительным телом - + Facemaker returned an error Генератор граней вернул ошибку @@ -1895,8 +1895,8 @@ unit to work with when opening the file. Готово - + Couldn't compute a shape Не удалось вычислить форму @@ -2066,25 +2066,25 @@ Site creation aborted. - + Unable to create a roof Невозможно создать крышу - + Please select a base object Пожалуйста, выберите базовый объект - + Roof Крыша - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2109,37 +2109,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Если Run = 0, то прогон рассчитывается таким образом, чтобы высота была такой же, как у связанного профиля. - + Id Идентификатор - + Angle (deg) Угол (градусы) - + Run (mm) Длина (мм) - + IdRel IdRel - + Thickness (mm) Толщина (мм) - + Overhang (mm) Свес крыши (мм) - + Height (mm) Высота (мм) @@ -2151,7 +2151,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Opening - Opening + Открыть @@ -2374,37 +2374,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Указать выбранное - - + + Remove Удалить - - + + Add Добавить - - - - + + + + - + - - + + Edit Редактировать @@ -2425,8 +2425,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Направляющие - + Components Компоненты @@ -2436,30 +2436,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Создать новый компонент - + Name Название - - + + Type Тип - + Thickness Толщина - + Offset Смещение @@ -2527,9 +2527,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Пожалуйста, выберите по крайней мере одну ось - + Axes Оси @@ -2541,9 +2541,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Успешно записано @@ -2553,8 +2553,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ферма - + Please select only one base object or none Пожалуйста, выберите только один базовый объект или ничего @@ -3108,24 +3108,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Не удается определить тип файла + - Description Описание + + - - Value Значение + - Unit Единица измерения @@ -3221,19 +3221,19 @@ Floor creation aborted. имеет неправильную фигуру + - has a null shape Имеет пустую форму - + Toggle subcomponents Переключить подкомпоненты @@ -3243,8 +3243,8 @@ Floor creation aborted. Закрытие редактирования эскиза - + Component Компонент @@ -3441,8 +3441,8 @@ Floor creation aborted. Центровать плоскость по объектам в списке - + Building Здание @@ -3821,14 +3821,14 @@ Building creation aborted. Вращение базы вокруг оси инструмента (используется только если BasePerpendicularToTool равен True) - + The length of this element, if not based on a profile Длина элемента, если не определена в профиле - + The width of this element, if not based on a profile Ширина элемента, если она не определена в профиле @@ -3838,15 +3838,15 @@ Building creation aborted. Высота или глубина выдавливания элемента. Задайте 0 для автоматического определения - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Нормальное направление выдавливания для этого объекта (оставить (0,0,0) для задания автоматической нормали) - + The structural nodes of this element Структурные узлы этого элемента @@ -3861,8 +3861,8 @@ Building creation aborted. Расстояние смещения между осевой и узловой линией - + The facemaker type to use to build the profile of this object Facemaker тип, используемый для построения профиля объекта @@ -3939,9 +3939,9 @@ Building creation aborted. Электрическая мощность в ваттах, необходимая оборудованию + - The type of this building Тип здания @@ -4260,20 +4260,20 @@ Building creation aborted. Ссылка для показа участка на картографическом сайте - + Other shapes that are appended to this object Другие фигуры, добавленные к объекту - + Other shapes that are subtracted from this object Другие фигуры, которые вычитаются из этого объекта - + The area of the projection of this object onto the XY plane Площадь проекции объекта на плоскость XY @@ -4308,8 +4308,8 @@ Building creation aborted. Опционально смещение между началом координат модели (0,0,0) и точкой, обозначенную геокоординатами - + The type of this object Тип данного объекта @@ -4423,6 +4423,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Указывает, следует ли разворачивать направление крыши + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6739,9 +6744,9 @@ Building creation aborted. Command - - + + Transform Преобразовать diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index 59efaca1ee..68d44a188e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 5e9d365657..e05c6b1a74 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -1283,8 +1283,8 @@ Ne glede na to, pa se "Stavbe" in "Nadstropja" uvozijo, če jih je več od enega DAE - + Export options Možnosti izvoza @@ -1735,40 +1735,40 @@ da se pri odpiranju datoteke izbere delovne enote. Risalni način - - + + Category Skupina - - - + + + Preset Prednastavljeno - - - - + + + + Length Dolžina - - + + Width Širina - + Height Višina @@ -1784,8 +1784,8 @@ da se pri odpiranju datoteke izbere delovne enote. Preklopi D/Š - + Con&tinue &Nadaljuj @@ -1802,8 +1802,8 @@ da se pri odpiranju datoteke izbere delovne enote. To ploskovje ni veljavno telo - + Facemaker returned an error Ploskovnik je vrnil napako @@ -1916,8 +1916,8 @@ da se pri odpiranju datoteke izbere delovne enote. Končano - + Couldn't compute a shape Ni bilo možno izračunati oblike @@ -2087,25 +2087,25 @@ Ustvarjanje lokacije prekinjeno. - + Unable to create a roof Strehe ni bilo mogoče ustvariti - + Please select a base object Izberite osnovni objekt - + Roof Streha - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2130,37 +2130,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Če je Vodoravni korak = 0, potem se vodoravni korak izračuna tako, da je višina enaka višini odnosnega preseka. - + Id ID - + Angle (deg) Kot (°) - + Run (mm) Vodoravni korak (mm) - + IdRel IdRel - + Thickness (mm) Debelina (mm) - + Overhang (mm) Napušč (mm) - + Height (mm) Višina (mm) @@ -2395,37 +2395,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Izberi označeno - - + + Remove Odstrani - - + + Add Dodaj - - - - + + + + - + - - + + Edit Uredi @@ -2446,8 +2446,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Črtovja - + Components Sestavine @@ -2457,30 +2457,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ustvari novo sestavino - + Name Ime - - + + Type Vrsta - + Thickness Debelina - + Offset Odmik @@ -2548,9 +2548,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Izberite vsaj eno os - + Axes Osi @@ -2562,9 +2562,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Uspešno zapisano @@ -2574,8 +2574,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Paličje - + Please select only one base object or none Izberite le en osnovni predmet ali pa nobenega @@ -3129,24 +3129,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Te vrste datoteke ni mogoče prepoznati + - Description Opis + + - - Value Vrednost + - Unit Enota @@ -3242,19 +3242,19 @@ Ustvarjanje etaže prekinjeno. ima neveljavno obliko + - has a null shape ima ničelno obliko - + Toggle subcomponents Preklapljanje podsestavin @@ -3264,8 +3264,8 @@ Ustvarjanje etaže prekinjeno. Zapiranje urejanja očrta - + Component Sestavina @@ -3462,8 +3462,8 @@ Ustvarjanje etaže prekinjeno. Usredini ravnino na predmete z zgornjega seznama - + Building Zgradba @@ -3840,14 +3840,14 @@ Ustvarjanj stavbe prekinjeno. Sukanje osnove okoli osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + The length of this element, if not based on a profile Dolžina tega gradnika, če ne izhaja iz preseka - + The width of this element, if not based on a profile Širina tega gradnika, če ne izhaja iz preseka @@ -3857,15 +3857,15 @@ Ustvarjanj stavbe prekinjeno. Višina oziroma globina izriva tega gradnika. Pustite 0 za samodejnost - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normala smeri izrivanja tega predmeta (pustite (0,0,0) za samodejno smer) - + The structural nodes of this element Konstrukcijska vozlišča tega gradnika @@ -3880,8 +3880,8 @@ Ustvarjanj stavbe prekinjeno. Odmik med središčnico in vozliščno črto - + The facemaker type to use to build the profile of this object Vrsta "facemaker" uporabljena za izgradnjo profila predmeta @@ -3958,9 +3958,9 @@ Ustvarjanj stavbe prekinjeno. Električna energija v vatih, ki jo ta oprema rabi + - The type of this building Vrsta te zgradbe @@ -4279,20 +4279,20 @@ Ustvarjanj stavbe prekinjeno. URL, ki prikazuje to lokacijo na spletnem zemljevidu - + Other shapes that are appended to this object Druge oblike, ki so pripete temu predmetu - + Other shapes that are subtracted from this object Druge oblike, ki so odštete od tega predmeta - + The area of the projection of this object onto the XY plane Površina preslikave tega predmeta na ravnino XY @@ -4327,8 +4327,8 @@ Ustvarjanj stavbe prekinjeno. Neobvezen odmik med izhodiščem modela (0,0,0) in točko podano v zemljepisnih sorednicah - + The type of this object Vrsta tega predmeta @@ -4442,6 +4442,11 @@ Ustvarjanj stavbe prekinjeno. Specifies if the direction of the roof should be flipped Določa ali naj se smer strehe obrne + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6758,9 +6763,9 @@ Ustvarjanj stavbe prekinjeno. Command - - + + Transform Preoblikuj diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm b/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm index 71ab7540c2..83274e8cb3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm and b/src/Mod/Arch/Resources/translations/Arch_sr-CS.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts index ab4707a7c1..14b0a548df 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts @@ -1283,8 +1283,8 @@ are placed in a 'Group' instead. DAE - + Export options Opcije izvoza @@ -1736,40 +1736,40 @@ jedinicama treba raditi prilikom otvaranja datoteke. Drawing mode - - + + Category Kategorija - - - + + + Preset Preset - - - - + + + + Length Dužina - - + + Width Širina - + Height Visina @@ -1785,8 +1785,8 @@ jedinicama treba raditi prilikom otvaranja datoteke. Switch L/W - + Con&tinue Con&tinue @@ -1803,8 +1803,8 @@ jedinicama treba raditi prilikom otvaranja datoteke. This mesh is an invalid solid - + Facemaker returned an error Tvorac stranica je vratio grešku @@ -1917,8 +1917,8 @@ jedinicama treba raditi prilikom otvaranja datoteke. Gotovo - + Couldn't compute a shape Couldn't compute a shape @@ -2088,25 +2088,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2131,37 +2131,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2396,37 +2396,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Izaberi - - + + Remove Ukloni - - + + Add Dodaj - - - - + + + + - + - - + + Edit Uredi @@ -2447,8 +2447,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Komponente @@ -2458,30 +2458,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Ime - - + + Type Vrsta - + Thickness Debljina - + Offset Odmak @@ -2549,9 +2549,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2563,9 +2563,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2575,8 +2575,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3130,24 +3130,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Opis + + - - Value Vrednost + - Unit Merna jedinica @@ -3243,19 +3243,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3265,8 +3265,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3463,8 +3463,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Building @@ -3843,14 +3843,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3860,15 +3860,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3883,8 +3883,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object Vrsta tvorca stranica koja će se koristiti za pravljenje profila ovog objekta @@ -3961,9 +3961,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4282,20 +4282,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4330,8 +4330,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4445,6 +4445,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6761,9 +6766,9 @@ Building creation aborted. Command - - + + Transform Pomeri diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm index 0754f12211..6b4c8ad07e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr.qm and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 54b358d2eb..abd4722c4f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -1283,8 +1283,8 @@ are placed in a 'Group' instead. DAE - + Export options Опције извоза @@ -1736,40 +1736,40 @@ unit to work with when opening the file. Drawing mode - - + + Category Категорија - - - + + + Preset Preset - - - - + + + + Length Дужина - - + + Width Ширина - + Height Висина @@ -1785,8 +1785,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1803,8 +1803,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Творац страница је вратио грешку @@ -1917,8 +1917,8 @@ unit to work with when opening the file. Готово - + Couldn't compute a shape Couldn't compute a shape @@ -2088,25 +2088,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2131,37 +2131,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2396,37 +2396,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Изабери - - + + Remove Уклони - - + + Add Додај - - - - + + + + - + - - + + Edit Уреди @@ -2447,8 +2447,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Компоненте @@ -2458,30 +2458,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Име - - + + Type Врста - + Thickness Дебљина - + Offset Одмак @@ -2549,9 +2549,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2563,9 +2563,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2575,8 +2575,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3130,24 +3130,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Опис + + - - Value Вредност + - Unit Мерна јединица @@ -3243,19 +3243,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3265,8 +3265,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3463,8 +3463,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Building @@ -3843,14 +3843,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3860,15 +3860,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3883,8 +3883,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object Врста творца страница која ће се користити за прављење профила овог објекта @@ -3961,9 +3961,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4282,20 +4282,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4330,8 +4330,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4445,6 +4445,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6761,9 +6766,9 @@ Building creation aborted. Command - - + + Transform Помери diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index c7b13845ea..8f3d6d4ee1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index dff3f32853..6eb202f1f3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -1282,8 +1282,8 @@ are placed in a 'Group' instead. DAE - + Export options Alternativ för exportering @@ -1734,40 +1734,40 @@ unit to work with when opening the file. Ritläge - - + + Category Kategori - - - + + + Preset Förval - - - - + + + + Length Längd - - + + Width Bredd - + Height Höjd @@ -1783,8 +1783,8 @@ unit to work with when opening the file. Byt L/W - + Con&tinue For&tsättning @@ -1801,8 +1801,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1915,8 +1915,8 @@ unit to work with when opening the file. Färdig - + Couldn't compute a shape Kunde inte beräkna en form @@ -2086,25 +2086,25 @@ Site creation aborted. - + Unable to create a roof Kunde inte skapa ett tak - + Please select a base object Vänligen välj ett basobjekt - + Roof Tak - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2129,37 +2129,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id ID - + Angle (deg) Angle (deg) - + Run (mm) Kör (mm) - + IdRel IdRel - + Thickness (mm) Tjocklek (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Höjd (mm) @@ -2394,37 +2394,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Välj markering - - + + Remove Ta bort - - + + Add Lägg till - - - - + + + + - + - - + + Edit Redigera @@ -2445,8 +2445,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Trådar - + Components Komponenter @@ -2456,30 +2456,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Skapa ny komponent - + Name Namn - - + + Type Typ - + Thickness Tjocklek - + Offset Offset @@ -2547,9 +2547,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axlar @@ -2561,9 +2561,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Framgångsrikt skriven @@ -2573,8 +2573,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3128,24 +3128,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Kunde inte känna igen den filtypen + - Description Beskrivning + + - - Value Värde + - Unit Enhet @@ -3241,19 +3241,19 @@ Floor creation aborted. har en ogiltig form + - has a null shape has a null shape - + Toggle subcomponents Växla underkomponenter @@ -3263,8 +3263,8 @@ Floor creation aborted. Closing Sketch edit - + Component Komponent @@ -3461,8 +3461,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Byggnad @@ -3841,14 +3841,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3858,15 +3858,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3881,8 +3881,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3959,9 +3959,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4280,20 +4280,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4328,8 +4328,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object Typen av detta objekt @@ -4443,6 +4443,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6759,9 +6764,9 @@ Building creation aborted. Command - - + + Transform Omvandla diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index 0e9afe655f..1d955aae1b 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index f5592e3880..baa7090ab4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -1281,8 +1281,8 @@ bunun yerine bir 'Grup'a yerleştirilir. DAE - + Export options Dışa aktarım seçenekleri @@ -1732,40 +1732,40 @@ Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular.Çizim modu - - + + Category Kategori - - - + + + Preset Ön ayar - - - - + + + + Length Uzunluk - - + + Width Genişlik - + Height Yükseklik @@ -1781,8 +1781,8 @@ Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular.L/W değiştir - + Con&tinue Devam @@ -1799,8 +1799,8 @@ Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular.Bu kafes hatalı bir katıdır - + Facemaker returned an error Facemaker bir hata döndürdü @@ -1913,8 +1913,8 @@ Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular.Bitti - + Couldn't compute a shape Couldn't compute a shape @@ -2084,25 +2084,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2127,37 +2127,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Kullanıcı kimliği - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Kalınlık (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2392,37 +2392,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Seçilen çekme - - + + Remove Kaldır - - + + Add Ekle - - - - + + + + - + - - + + Edit Düzenle @@ -2443,8 +2443,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Bileşenler @@ -2454,30 +2454,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Isim - - + + Type Türü - + Thickness Kalınlık - + Offset Uzaklaşma @@ -2545,9 +2545,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2559,9 +2559,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2571,8 +2571,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3126,24 +3126,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Açıklama + + - - Value Değer + - Unit Birim @@ -3239,19 +3239,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3261,8 +3261,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3459,8 +3459,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building İnşa ediliyor @@ -3839,14 +3839,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3856,15 +3856,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3879,8 +3879,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3957,9 +3957,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4278,20 +4278,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4326,8 +4326,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4441,6 +4441,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6758,9 +6763,9 @@ Building creation aborted. Command - - + + Transform Dönüştür diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index 1cf62b5a68..e33766fcec 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index 9d81be55a1..e8147ea89f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -1291,8 +1291,8 @@ are placed in a 'Group' instead. DAE - + Export options Налаштування експорту @@ -1744,40 +1744,40 @@ unit to work with when opening the file. Режим креслення - - + + Category Категорія - - - + + + Preset Налаштування - - - - + + + + Length Довжина - - + + Width Ширина - + Height Висота @@ -1793,8 +1793,8 @@ unit to work with when opening the file. Перемкнути Д/Ш [Довжина/Ширина] - + Con&tinue Продовжити @@ -1811,8 +1811,8 @@ unit to work with when opening the file. Ця сітка не може бути тілом - + Facemaker returned an error Генератор граней повернув помилку @@ -1925,8 +1925,8 @@ unit to work with when opening the file. Готово - + Couldn't compute a shape Не вдалось обчислити форму @@ -2096,25 +2096,25 @@ Site creation aborted. - + Unable to create a roof Не вдалося створити покрівлю - + Please select a base object Будь ласка, виберіть базовий об'єкт - + Roof Дах - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2139,37 +2139,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Ідентифікатор - + Angle (deg) Кут (град.) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Товщина (мм) - + Overhang (mm) Навіс (мм) - + Height (mm) Висота (мм) @@ -2404,37 +2404,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Вибрати вибране - - + + Remove Вилучити - - + + Add Додати - - - - + + + + - + - - + + Edit Редагувати @@ -2455,8 +2455,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Сітки - + Components Компоненти @@ -2466,30 +2466,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Створити новий компонент - + Name Назва - - + + Type Тип - + Thickness Товщина - + Offset Зсув @@ -2557,9 +2557,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Виберіть принаймні одну вісь - + Axes Вісі @@ -2571,9 +2571,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Записано успішно @@ -2583,8 +2583,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Ферма - + Please select only one base object or none Виберіть лише один базовий об'єкт або нічого не вибирайте, будь ласка @@ -3138,24 +3138,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Опис + + - - Value Значення + - Unit Одиниця @@ -3251,19 +3251,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3273,8 +3273,8 @@ Floor creation aborted. Closing Sketch edit - + Component Компонент @@ -3471,8 +3471,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Будівля @@ -3851,14 +3851,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3868,15 +3868,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3891,8 +3891,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3969,9 +3969,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4290,20 +4290,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4338,8 +4338,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4453,6 +4453,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6769,9 +6774,9 @@ Building creation aborted. Command - - + + Transform Перетворити diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm index 3cf7c9ec7f..cbdae893e5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index b4a0fc4f18..cb7434e667 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -1271,8 +1271,8 @@ are placed in a 'Group' instead. DAE - + Export options Opcions d'exportació @@ -1705,40 +1705,40 @@ unit to work with when opening the file. Drawing mode - - + + Category Categoria - - - + + + Preset Preset - - - - + + + + Length Longitud - - + + Width Amplària - + Height Alçària @@ -1754,8 +1754,8 @@ unit to work with when opening the file. Switch L/W - + Con&tinue Con&tinue @@ -1772,8 +1772,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1886,8 +1886,8 @@ unit to work with when opening the file. Fet - + Couldn't compute a shape Couldn't compute a shape @@ -2057,25 +2057,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2100,37 +2100,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2365,37 +2365,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Tria el seleccionat - - + + Remove Elimina - - + + Add Afegir - - - - + + + + - + - - + + Edit Edita @@ -2416,8 +2416,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components Components @@ -2427,30 +2427,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name Nom - - + + Type Tipus - + Thickness Gruix - + Offset Separació @@ -2518,9 +2518,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2532,9 +2532,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2544,8 +2544,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3099,24 +3099,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description Descripció + + - - Value Valor + - Unit Unitat @@ -3212,19 +3212,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3234,8 +3234,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3432,8 +3432,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building Construcció @@ -3812,14 +3812,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3829,15 +3829,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3852,8 +3852,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3930,9 +3930,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4251,20 +4251,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4299,8 +4299,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4414,6 +4414,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6730,9 +6735,9 @@ Building creation aborted. Command - - + + Transform Transforma diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index 2bbe42636b..8f895909d6 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index cabd6ea900..6d6d75b867 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -1277,8 +1277,8 @@ are placed in a 'Group' instead. DAE - + Export options 导出选项 @@ -1720,40 +1720,40 @@ unit to work with when opening the file. 绘图模式 - - + + Category 类别 - - - + + + Preset 预设值 - - - - + + + + Length 长度 - - + + Width 宽度 - + Height 高度 @@ -1769,8 +1769,8 @@ unit to work with when opening the file. 切换 长/宽 - + Con&tinue 继续&t @@ -1787,8 +1787,8 @@ unit to work with when opening the file. 该网格是无效实体 - + Facemaker returned an error 服务器返回了一个错误 @@ -1901,8 +1901,8 @@ unit to work with when opening the file. 完成 - + Couldn't compute a shape 无法计算形状 @@ -2069,25 +2069,25 @@ Site creation aborted. - + Unable to create a roof 无法创建屋顶 - + Please select a base object 请选择一个基物体 - + Roof 屋顶 - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2112,37 +2112,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 如果运行= 0，则计算运行的高度与相对配置文件相同。 - + Id 编号 - + Angle (deg) 角度(度) - + Run (mm) 斜边(毫米) - + IdRel 关联编号 - + Thickness (mm) 厚度(毫米) - + Overhang (mm) 悬垂(毫米) - + Height (mm) 高度(毫米) @@ -2377,37 +2377,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 选取选定的 - - + + Remove 删除 - - + + Add 添加 - - - - + + + + - + - - + + Edit 编辑 @@ -2428,8 +2428,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 线框 - + Components 组件 @@ -2439,30 +2439,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 创建新组件 - + Name 名称 - - + + Type 类型 - + Thickness 厚度 - + Offset 偏移 @@ -2530,9 +2530,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 请至少选择一个坐标轴 - + Axes 坐标轴 @@ -2544,9 +2544,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written 写入成功 @@ -2556,8 +2556,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 桁架 - + Please select only one base object or none 请只选择一个基对象或不选 @@ -3111,24 +3111,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description 描述 + + - - Value 值 + - Unit 单位 @@ -3224,19 +3224,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3246,8 +3246,8 @@ Floor creation aborted. Closing Sketch edit - + Component Component @@ -3444,8 +3444,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building 建筑 @@ -3824,14 +3824,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3841,15 +3841,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element The structural nodes of this element @@ -3864,8 +3864,8 @@ Building creation aborted. Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3942,9 +3942,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4263,20 +4263,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4311,8 +4311,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4426,6 +4426,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6742,9 +6747,9 @@ Building creation aborted. Command - - + + Transform 变换 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index 64cd8d403f..ab8577d4fc 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index c2cf2569fb..2d90ae9d07 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -1274,8 +1274,8 @@ are placed in a 'Group' instead. DAE - + Export options 匯出選項 @@ -1723,40 +1723,40 @@ unit to work with when opening the file. 繪圖模式 - - + + Category 類別 - - - + + + Preset 預設 - - - - + + + + Length 間距 - - + + Width 寬度 - + Height 高度 @@ -1772,8 +1772,8 @@ unit to work with when opening the file. 切換 L/W - + Con&tinue 繼續(&t) @@ -1790,8 +1790,8 @@ unit to work with when opening the file. This mesh is an invalid solid - + Facemaker returned an error Facemaker returned an error @@ -1904,8 +1904,8 @@ unit to work with when opening the file. 完成 - + Couldn't compute a shape Couldn't compute a shape @@ -2073,25 +2073,25 @@ Site creation aborted. - + Unable to create a roof Unable to create a roof - + Please select a base object Please select a base object - + Roof Roof - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -2116,37 +2116,37 @@ If Angle = 0 then the angle is calculated so that the height is the same as the If Run = 0 then the run is calculated so that the height is the same as the relative profile. - + Id Id - + Angle (deg) Angle (deg) - + Run (mm) Run (mm) - + IdRel IdRel - + Thickness (mm) Thickness (mm) - + Overhang (mm) Overhang (mm) - + Height (mm) Height (mm) @@ -2381,37 +2381,37 @@ If Run = 0 then the run is calculated so that the height is the same as the rela 挑選 - - + + Remove 移除 - - + + Add 新增 - - - - + + + + - + - - + + Edit 編輯 @@ -2432,8 +2432,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - + Components 組件 @@ -2443,30 +2443,30 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - + Name 名稱 - - + + Type 類型 - + Thickness 厚度 - + Offset 偏移 @@ -2534,9 +2534,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Please select at least one axis - + Axes Axes @@ -2548,9 +2548,9 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Successfully written Successfully written @@ -2560,8 +2560,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Truss - + Please select only one base object or none Please select only one base object or none @@ -3115,24 +3115,24 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to recognize that file type + - Description 說明 + + - - Value 值 + - Unit 單位 @@ -3228,19 +3228,19 @@ Floor creation aborted. has an invalid shape + - has a null shape has a null shape - + Toggle subcomponents Toggle subcomponents @@ -3250,8 +3250,8 @@ Floor creation aborted. Closing Sketch edit - + Component 組件 @@ -3448,8 +3448,8 @@ Floor creation aborted. Centers the plane on the objects in the list above - + Building 建築 @@ -3828,14 +3828,14 @@ Building creation aborted. Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile @@ -3845,15 +3845,15 @@ Building creation aborted. The height or extrusion depth of this element. Keep 0 for automatic - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The structural nodes of this element 此元件之結構節點 @@ -3868,8 +3868,8 @@ Building creation aborted. 中心線與節點線之偏移距離 - + The facemaker type to use to build the profile of this object The facemaker type to use to build the profile of this object @@ -3946,9 +3946,9 @@ Building creation aborted. The electric power needed by this equipment in Watts + - The type of this building The type of this building @@ -4267,20 +4267,20 @@ Building creation aborted. A URL that shows this site in a mapping website - + Other shapes that are appended to this object Other shapes that are appended to this object - + Other shapes that are subtracted from this object Other shapes that are subtracted from this object - + The area of the projection of this object onto the XY plane The area of the projection of this object onto the XY plane @@ -4315,8 +4315,8 @@ Building creation aborted. An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -4430,6 +4430,11 @@ Building creation aborted. Specifies if the direction of the roof should be flipped Specifies if the direction of the roof should be flipped + + + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + An optional object that defines a volume to be subtracted from walls. If field is set - it has a priority over auto-generated subvolume + The base file this component is built upon @@ -6746,9 +6751,9 @@ Building creation aborted. Command - - + + Transform 轉換 diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index b91950e16b..8eb7ab3326 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -1501,7 +1501,6 @@ pattern definitions to be added to the standard patterns - @@ -1509,6 +1508,7 @@ pattern definitions to be added to the standard patterns + mm @@ -1606,8 +1606,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - + px @@ -1918,9 +1918,9 @@ from the Addon Manager. - - + + Import options @@ -2129,8 +2129,8 @@ If it is set to '0' the whole spline is treated as a straight segment. - + Export options @@ -2399,8 +2399,8 @@ These lines are thicker than normal grid lines. - + Automatic @@ -2695,8 +2695,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3102,7 +3102,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Rotate @@ -3125,7 +3125,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Offset @@ -3306,59 +3306,59 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. - + Wrong input: object {} not in document. - + Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. - + image is Null - + filename does not exist on the system or in the resource file - + unable to load texture - + Does not have 'ViewObject.RootNode'. @@ -3466,65 +3466,65 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create Label - - + + Pick endpoint of leader line - - + + Pick text position - - - + + + Pick first point - + Create Line - + Create Wire - + Polyline - - - - - - - + + + + + + + Pick next point - + Unable to create a Wire from selected objects - + Convert to Wire @@ -3549,54 +3549,54 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create Text - + Select an object to convert. - + Convert to Sketch - + Convert to Draft - + Convert Draft/Sketch - + Select an object to move - + Pick start point - - + + Pick end point - + Move - - + + Some subelements could not be moved. @@ -3607,75 +3607,75 @@ To enabled FreeCAD to download these libraries, answer Yes. - - - + + + - + Pick radius - - - + + + Start angle - - + + Pick start angle - - - + + + Aperture angle - + Pick aperture - + Create Circle (Part) - + Create Circle - + Create Arc (Part) - + Create Arc - + Pick aperture angle - - + + Arc by 3 points - + Create Arc by 3 points @@ -3685,7 +3685,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select an object to edit @@ -3700,17 +3700,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + No edit point found for selected object - + Too many objects selected, max number set to: - + : this object is not editable @@ -3740,13 +3740,13 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select an object to project - - + + Create Point @@ -3762,38 +3762,38 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle - + The base angle you wish to start the rotation from - + Pick base angle - + Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. - + Pick rotation angle @@ -3898,12 +3898,12 @@ The final angle will be the base angle plus this amount. - + Create Polygon (Part) - + Create Polygon @@ -3913,7 +3913,7 @@ The final angle will be the base angle plus this amount. - + Split line @@ -3923,8 +3923,8 @@ The final angle will be the base angle plus this amount. - + Pick distance @@ -3964,14 +3964,14 @@ The final angle will be the base angle plus this amount. - + Last point has been removed - + Create B-spline @@ -4133,14 +4133,14 @@ The final angle will be the base angle plus this amount. - - + + Create Ellipse - - + + Pick opposite point @@ -4233,25 +4233,25 @@ The final angle will be the base angle plus this amount. - - - - + + + + Create Dimension - + Create Dimension (radial) - + Edge too short! - + Edges don't intersect! @@ -4281,12 +4281,12 @@ The final angle will be the base angle plus this amount. - + Turning one Rectangle into a Wire - + Stretch @@ -4296,12 +4296,12 @@ The final angle will be the base angle plus this amount. - + Create Plane - + Create Rectangle @@ -4316,13 +4316,13 @@ The final angle will be the base angle plus this amount. - + Mirror - - + + Pick end point of mirror line @@ -4332,17 +4332,17 @@ The final angle will be the base angle plus this amount. - + Select an object to clone - + Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them @@ -4352,13 +4352,13 @@ The final angle will be the base angle plus this amount. - - + + Select an object to upgrade - + Upgrade @@ -4383,7 +4383,7 @@ The final angle will be the base angle plus this amount. - + Create 2D view @@ -4403,14 +4403,14 @@ The final angle will be the base angle plus this amount. - + Downgrade - - + + Task panel: @@ -4421,26 +4421,26 @@ The final angle will be the base angle plus this amount. - - + + At least one element must be selected. - - + + Selection is not suitable for array. - - - - + + + + Object: @@ -4460,16 +4460,16 @@ The final angle will be the base angle plus this amount. - - + + Fuse: - - + + Create Link array: @@ -4484,8 +4484,8 @@ The final angle will be the base angle plus this amount. - + Center of rotation: @@ -4604,17 +4604,17 @@ The final angle will be the base angle plus this amount. - + ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires - + ShapeString: face creation failed for one character @@ -4741,38 +4741,35 @@ The final angle will be the base angle plus this amount. - - - - + + + + Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. - - - - + @@ -4782,18 +4779,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4810,8 +4810,8 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be an integer number. @@ -4825,7 +4825,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. @@ -4890,12 +4890,12 @@ The final angle will be the base angle plus this amount. - + Wrong input: point_object not in document. - + Wrong input: object has the wrong type. @@ -5222,9 +5222,9 @@ The final angle will be the base angle plus this amount. - - + + renamed 'DisplayMode' options to 'World/Screen' @@ -5408,7 +5408,7 @@ from menu Tools -> Addon Manager - + Clone @@ -5419,21 +5419,21 @@ from menu Tools -> Addon Manager - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True - - + + False @@ -5732,12 +5732,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6008,12 +6008,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6037,12 +6037,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. @@ -6051,12 +6051,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools - + Create various types of circular arcs. @@ -6102,32 +6102,6 @@ on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - - - - - Adds a point to an existing Wire or B-spline. - - - - - Draft_DelPoint - - - Remove point - - - - - Removes a point from an existing Wire or B-spline. - - - Draft_CircularArray @@ -6950,19 +6924,19 @@ set True for fusion or False for compound - + Create a face + + - - The area of this object @@ -7006,8 +6980,8 @@ set True for fusion or False for compound - + The object along which the copies will be distributed. It must contain 'Edges'. @@ -7022,9 +6996,9 @@ set True for fusion or False for compound - - + + Show the individual array elements (only for Link arrays) @@ -7119,8 +7093,8 @@ they will only be editable by changing the style through the 'Annotation st - + The base object that will be duplicated @@ -7863,14 +7837,14 @@ Use 'arch' to force US arch notation - + Arrow size - + Arrow type diff --git a/src/Mod/Draft/Resources/translations/Draft_be.qm b/src/Mod/Draft/Resources/translations/Draft_be.qm index df8c222a99..853c6c084e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_be.qm and b/src/Mod/Draft/Resources/translations/Draft_be.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_be.ts b/src/Mod/Draft/Resources/translations/Draft_be.ts index 3de44908ec..66e67bcac0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_be.ts +++ b/src/Mod/Draft/Resources/translations/Draft_be.ts @@ -1544,7 +1544,6 @@ pattern definitions to be added to the standard patterns Памер шрыфту - @@ -1552,6 +1551,7 @@ pattern definitions to be added to the standard patterns + mm мм @@ -1655,8 +1655,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.Першапачатковая шырыня лініі - + px пікселяў @@ -1979,9 +1979,9 @@ from the Addon Manager. Дазволіць FreeCAD аўтаматычна спампоўваць і абнаўляць бібліятэкі DXF - - + + Import options Налады імпартавання @@ -2195,8 +2195,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Калі ён усталяваны ў '0', то ўвесь сплайн апрацоўваецца як прамы сегмент. - + Export options Налады экспартавання @@ -2472,8 +2472,8 @@ These lines are thicker than normal grid lines. Абярыце службовую праграму "dwg2dxf", калі ўжываеце LibreDWG, "ODAFileConverter", калі ўжываеце сродак пераўтварэння файлаў ODA, ці службовую праграму "dwg2dwg", калі ўжываеце QCAD pro. - + Automatic Аўтаматычна @@ -2768,8 +2768,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3177,7 +3177,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Павярнуць @@ -3200,7 +3200,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Зрушэнне @@ -3391,59 +3391,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Задайце маштаб, які ўжываецца інструментамі заметкі Чарнавіка - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Без бягучага дакументу. Перарываецца. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Няправільны ўвод: аб'ект {} адсутнічае ў дакуменце. - + Unable to insert new object into a scaled part Немагчыма ўставіць новы аб'ект у маштабаваную дэталь - + Symbol not implemented. Using a default symbol. Знак не рэалізаваны. Ужыты першапачатковы знак. - + image is Null выява пустая - + filename does not exist on the system or in the resource file імя файла не існуе ні ў сістэме, ні ў файле рэсурсаў - + unable to load texture немагчыма загрузіць тэкстуру - + Does not have 'ViewObject.RootNode'. Не мае 'ViewObject.RootNode'. @@ -3516,7 +3516,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: unknown document {} - Wrong input: unknown document {} + Няправільны ўвод: невядомы дакумент {} @@ -3551,65 +3551,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выберыце мэтавую кропку - + Create Label Стварыць метку - - + + Pick endpoint of leader line Выберыце канчатковую кропку лініі зноскі - - + + Pick text position Выберыце становішча тэксту - - - + + + Pick first point Выберыце першую кропку - + Create Line Стварыць лінію - + Create Wire Стварыць ломаную лінію - + Polyline Ломаная лінія - - - - - - - + + + + + + + Pick next point Выберыце наступную кропку - + Unable to create a Wire from selected objects Немагчыма стварыць ломаную лінію з абраных аб'ектаў - + Convert to Wire Пераўтварыць у ломаную лінію @@ -3634,54 +3634,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выбраць месцазнаходжанне кропкі - + Create Text Стварыць тэкст - + Select an object to convert. Абярыце аб'ект для пераўтварэння. - + Convert to Sketch Пераўтварыць у Эскіз - + Convert to Draft Пераўтварыць у Чарнавік - + Convert Draft/Sketch Пераўтварыць чарнавік/эскіз - + Select an object to move Абярыце аб'ект для руху - + Pick start point Выберыце пачатковую кропку - - + + Pick end point Выберыце апошнюю кропку - + Move Рухаць - - + + Some subelements could not be moved. Некаторыя ўкладзеныя элементы не атрымалася перамясціць. @@ -3692,77 +3692,77 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выберыце цэнтральную кропку - - - + + + - + Pick radius Выберыце радыус - - - + + + Start angle Пачатковы вугал - - + + Pick start angle Выберыце пачатковы вугал - - - + + + Aperture angle Вугал апертуры - + Pick aperture Выберыце апертуру - + Create Circle (Part) Стварыць акружнасць (дэталь) - + Create Circle Стварыць акружнасць - + Create Arc (Part) Стварыць дугу (дэталь) - + Create Arc Стварыць дугу - + Pick aperture angle Выберыце апертуру вугла - - + + Arc by 3 points Дуга па трох кропках - + Create Arc by 3 points - Create Arc by 3 points + Стварыць дугу па трох кропках @@ -3770,7 +3770,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Пераключыць сетку - + Select an object to edit Абярыце аб'ект для змены @@ -3785,17 +3785,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Змяніць вузел - + No edit point found for selected object Кропка змены для абранага аб'екта не знойдзена - + Too many objects selected, max number set to: Абрана зашмат аб'ектаў, зададзена найбольшая колькасць: - + : this object is not editable : аб'ект недаступны да змены @@ -3825,13 +3825,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Захаваць файл стыляў - + Select an object to project Абярыце аб'ект для праекту - - + + Create Point Стварыць кропку @@ -3847,31 +3847,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle Асноўны вугал - + The base angle you wish to start the rotation from Асноўны вугал, з якога вы жадаеце пачаць вярчэнне - + Pick base angle Выберыце асноўны вугал - + Rotation Вярчэнне - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Велічыня вярчэння, які вы жадаеце выканаць. @@ -3879,7 +3879,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Выберыце вугал вярчэння @@ -3984,12 +3984,12 @@ The final angle will be the base angle plus this amount. Шматкутнік - + Create Polygon (Part) Стварыць шматкутнік (дэталь) - + Create Polygon Стварыць шматкутнік @@ -3999,7 +3999,7 @@ The final angle will be the base angle plus this amount. Пстрыкніце ў любым месцы лініі, каб падзяліць яе. - + Split line Падзяліць лінію @@ -4009,8 +4009,8 @@ The final angle will be the base angle plus this amount. Абярыце аб'ект, каб абрэзаць ці выцягнуць - + Pick distance Выберыце адлегласць @@ -4050,14 +4050,14 @@ The final angle will be the base angle plus this amount. Сплайн быў замкнуты - + Last point has been removed Апошняя кропка была выдаленая - + Create B-spline Стварыць B-сплайн @@ -4219,14 +4219,14 @@ The final angle will be the base angle plus this amount. Эліпс - - + + Create Ellipse Стварыць эліпс - - + + Pick opposite point Выберыце супрацьлеглую кропку @@ -4319,25 +4319,25 @@ The final angle will be the base angle plus this amount. Вымярэнне - - - - + + + + Create Dimension Стварыць вымярэнне - + Create Dimension (radial) Стварыць вымярэнне (радыяльны) - + Edge too short! Рабро занадта кароткае! - + Edges don't intersect! Рэбры не перасякаюцца! @@ -4367,12 +4367,12 @@ The final angle will be the base angle plus this amount. Выберыце канчатковую кропку зрушэння - + Turning one Rectangle into a Wire Ператварэнне аднаго прастакутніка ў ломаную лінію - + Stretch Расцягнуць @@ -4382,12 +4382,12 @@ The final angle will be the base angle plus this amount. Прастакутнік - + Create Plane Стварыць плоскасць - + Create Rectangle Стварыць прастакутнік @@ -4402,13 +4402,13 @@ The final angle will be the base angle plus this amount. Абярыце пачатковую кропку лініі сіметрыі - + Mirror Сіметрычна - - + + Pick end point of mirror line Абярыце канчатковую кропку лініі сіметрыі @@ -4418,19 +4418,19 @@ The final angle will be the base angle plus this amount. Сетка скручаных траекторый - + Select an object to clone Абярыце аб'ект для дубліравання - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Немагчыма дубліраваць аб'екты без фігуры, перапыняецца - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Немагчыма дубліраваць аб'екты без фігуры, прапусціць @@ -4438,13 +4438,13 @@ The final angle will be the base angle plus this amount. Змяніць ухіл - - + + Select an object to upgrade Абярыце аб'ект для абнаўлення - + Upgrade Абнавіць @@ -4469,7 +4469,7 @@ The final angle will be the base angle plus this amount. Зрушэнне крывых Без'е ў бягучы час не падтрымліваецца - + Create 2D view Стварыць двухмерны выгляд @@ -4489,14 +4489,14 @@ The final angle will be the base angle plus this amount. Выправіць - + Downgrade Разбіць - - + + Task panel: Панэль задач: @@ -4507,26 +4507,26 @@ The final angle will be the base angle plus this amount. Палярная сетка - - + + At least one element must be selected. Павінна быць абрана, па меншай меры, адзін элемент. - - + + Selection is not suitable for array. Выбар не падыходзіць для масіву. - - - - + + + + Object: Аб'ект: @@ -4546,16 +4546,16 @@ The final angle will be the base angle plus this amount. Вугал ніжэй 360 градусаў. Для працягу зададзена гэтае значэнне. - - + + Fuse: Аб'яднаць: - - + + Create Link array: Стварыць Сетку спасылак: @@ -4570,8 +4570,8 @@ The final angle will be the base angle plus this amount. Палярны вугал: - + Center of rotation: Цэнтр вярчэння: @@ -4690,17 +4690,17 @@ The final angle will be the base angle plus this amount. зменены тып уласцівасці 'Tracking' - + ShapeString: oblique angle must be in the -80 to +80 degree range Контур радка: вугал нахілу павінен знаходзіцца ў дыяпазоне ад -80 да + 80 градусаў - + ShapeString: string has no wires Контур радка: радок не мае ломаных ліній - + ShapeString: face creation failed for one character Контур радка: не атрымалася стварыць грань для аднаго знаку @@ -4782,12 +4782,12 @@ The final angle will be the base angle plus this amount. Two objects are needed. - Two objects are needed. + Патрэбны два аб'екты. One object is not valid. - One object is not valid. + Адзін аб'ект недапушчальны. @@ -4827,38 +4827,35 @@ The final angle will be the base angle plus this amount. Не атрымалася зрабіць фігуру: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Няправільны ўвод: адсутнічае base_object у дакуменце. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Няправільны ўвод: адсутнічае path_object у дакуменце. - - - - - - + + + + + + Wrong input: must be a number. Няправільны ўвод: павінен быць лік. - - - - + @@ -4868,18 +4865,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Няправільны ўвод: павінен быць вектар. - + Wrong input: must be a list or tuple of strings, or a single string. Няправільны ўвод: павінен быць спіс ці картэж радкоў, альбо адзін радок. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Няправільны ўвод: павінен быць 'Зыходны', 'Фрэне' ці 'Датычны'. @@ -4896,8 +4896,8 @@ The final angle will be the base angle plus this amount. Увод: адно значэнне, які пашыраны ў вектар. - + Wrong input: must be an integer number. Няправільны ўвод: павінен быць цэлы лік. @@ -4911,7 +4911,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Няправільны ўвод: павінна быць размяшчэнне, вектар ці паварот. @@ -4919,22 +4919,22 @@ The final angle will be the base angle plus this amount. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Няправільны ўвод: target_object не павінен быць спісам. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Няправільны ўвод: адсутнічае target_object у дакуменце. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Няправільны ўвод: укладзеныя элементы павінны быць спісам ці картэжам радкоў, альбо адзін радок. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Няправільны ўвод: укладзенага элементу {} няма ў аб'екце. @@ -4963,7 +4963,7 @@ The final angle will be the base angle plus this amount. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Няправільны ўвод: кропкі {} павінны быць спісам па меншай меры з двух вектараў. @@ -4976,12 +4976,12 @@ The final angle will be the base angle plus this amount. Няправільны ўвод: павінен быць спіс з двух элементаў. Напрыклад [аб'ект, 'Рабро1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Няправільны ўвод: адсутнічае point_object у дакуменце. - + Wrong input: object has the wrong type. Няправільны ўвод: аб'ект мае няправільны тып. @@ -4998,13 +4998,13 @@ The final angle will be the base angle plus this amount. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Няправільны ўвод: edge_object не павінен быць спісам ці картэжам. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Няправільны ўвод: адсутнічае edge_object у дакуменце. @@ -5308,9 +5308,9 @@ The final angle will be the base angle plus this amount. дададзена ўласцівасць выгляду 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' налада 'DisplayMode' пераназваная ў 'World/Screen' @@ -5495,7 +5495,7 @@ from menu Tools -> Addon Manager Памылка: модуль json не знойдзены. Немагчыма захаваць стыль - + Clone Дублікат @@ -5506,21 +5506,21 @@ from menu Tools -> Addon Manager Ухіл - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Напрамак зрушэння не вызначана. Калі ласка, спачатку навядзіце курсор мышы на любы бок ад аб'екта, каб паказаць напрамак - - + + True Ісціна - - + + False Хлусня @@ -5829,12 +5829,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Ломаная лінія - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Стварае лінію з некалькімі кропкамі (ламаную лінію). <Ctrl> для прывязкі, <Shift> для абмежавання. @@ -6110,12 +6110,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Рухаць - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6142,12 +6142,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Дуга па трох кропках - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Стварае дугу акружнасці па абраных трох кропках. @@ -6157,12 +6157,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Інструменты дугі - + Create various types of circular arcs. Стварае розныя тыпы круглых дуг. @@ -6209,32 +6209,6 @@ on supported nodes and on supported objects. Націсніце <E> ці <Alt + левая кнопка мышы>, каб адлюстраваць кантэкстнае меню на вузлах і на аб'ектах, якія падтрымліваюцца. - - Draft_AddPoint - - - Add point - Дадаць кропку - - - - Adds a point to an existing Wire or B-spline. - Дадае кропку да існуючай ломанай лініі ці B-сплайну. - - - - Draft_DelPoint - - - Remove point - Выдаліць кропку - - - - Removes a point from an existing Wire or B-spline. - Выдаляе кропку з існуючай ломанай лініі ці B-сплайну. - - Draft_CircularArray @@ -7119,19 +7093,19 @@ set True for fusion or False for compound - + Create a face Стварыць грань + + - - The area of this object Плошча аб'екту @@ -7175,8 +7149,8 @@ set True for fusion or False for compound Асноўны аб'ект, які будзе паўтарацца. - + The object along which the copies will be distributed. It must contain 'Edges'. Аб'ект, па якім будуць распаўсюджвацца копіі. Ён павінен утрымліваць 'Рэбры'. @@ -7191,9 +7165,9 @@ set True for fusion or False for compound Каэфіцыент павароту скручанай сеткі. - - + + Show the individual array elements (only for Link arrays) Паказваць асобныя элементы масіва (толькі для 'Сетак спасылак') @@ -7312,8 +7286,8 @@ they will only be editable by changing the style through the 'Annotation style e Пры ўжыванні захаванага стылю некаторыя ўласцівасці прадстаўлення стануць даступныя толькі для чытання; іх можна будзе мяняць, толькі калі змяніць стыль з дапамогай інструмента 'Рэдактар стыляў заметкі'. - + The base object that will be duplicated Асноўны аб'ект, які будзе паўторацца @@ -8104,14 +8078,14 @@ Use 'arch' to force US arch notation Ужывайце 'arch' для абазначэння архітэктурнай ЗША - + Arrow size Памер стрэлкі - + Arrow type Тып стрэлкі diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 6b27075644..8bbc93a5f2 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index a8aae91416..a63cfda1b7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -1539,7 +1539,6 @@ pattern definitions to be added to the standard patterns Mida del tipus de lletra - @@ -1547,6 +1546,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1647,8 +1647,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1967,9 +1967,9 @@ del gestor de complements. Permeten a FreeCAD automàticament descarregar i actualitzar les biblioteques DXF - - + + Import options Opcions d'importació @@ -2179,8 +2179,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Longitud màxima de cadascun dels segments de la polilínia. Si s'estableix en «0», l'spline sencer es tracta com un segment recte. - + Export options Opcions d'exportació @@ -2456,8 +2456,8 @@ These lines are thicker than normal grid lines. Aquest és el mètode que utilitzarà FreeCAD per convertir fitxers DWG a DXF. Si s'escull "Automàtic", FreeCAD intentarà trobar un dels convertidors següents en el mateix ordre que es mostren aquí. Si FreeCAD no en troba cap, és possible que hàgiu de triar un convertidor específic i indicar-ne el camí aquí a continuació. Trieu la utilitat "dwg2dxf" si feu servir LibreDWG, "ODAFileConverter" si feu servir el convertidor de fitxers ODA o la utilitat "dwg2dwg" si feu servir la versió professional de QCAD. - + Automatic Automàtica @@ -2752,8 +2752,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3159,7 +3159,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rotació @@ -3182,7 +3182,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Equidistancia (ofset) @@ -3370,59 +3370,59 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Estableix l'escala utilitzada per les eines d'anotació d'esborranys - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Cap document actiu. Avortant. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part No es pot inserir un nou objecte a una part escalada - + Symbol not implemented. Using a default symbol. Símbol no implementat. Utilitzant un símbol per defecte. - + image is Null la imatge és nul·la - + filename does not exist on the system or in the resource file nom de fitxer no existeix al sistema ni al fitxer de recursos - + unable to load texture no es pot carregar la textura - + Does not have 'ViewObject.RootNode'. No té "ViewObject.RootNode". @@ -3530,65 +3530,65 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Trieu el punt objectiu - + Create Label Crear etiqueta - - + + Pick endpoint of leader line Trieu el punt final de la línia guia - - + + Pick text position Trieu la posició del text - - - + + + Pick first point Trieu el primer punt - + Create Line Crear línia - + Create Wire Crear Polilínia - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Tria el següent punt - + Unable to create a Wire from selected objects No es pot crear una Polilínia a partir dels objectes seleccionats - + Convert to Wire Convertir a Polilínia @@ -3613,54 +3613,54 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Tria el punt de localització - + Create Text Crear Text - + Select an object to convert. Seleccioneu un objecte per convertir. - + Convert to Sketch Converteix en Esbós - + Convert to Draft Converteix a Dibuix - + Convert Draft/Sketch Converteix en Dibuix/Esbós - + Select an object to move Seleccioneu un objecte per moure - + Pick start point Trieu el punt d'inici - - + + Pick end point Trieu el punt final - + Move Mou - - + + Some subelements could not be moved. Alguns subelements no s'han pogut moure. @@ -3671,75 +3671,75 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Trieu el punt central - - - + + + - + Pick radius Trieu el radi - - - + + + Start angle Angle inicial - - + + Pick start angle Trieu l'angle d'inici - - - + + + Aperture angle Angle d'obertura - + Pick aperture Trieu obertura - + Create Circle (Part) Crea Cercle (Part) - + Create Circle Crear Cercle - + Create Arc (Part) Crear Arc (Part) - + Create Arc Crear Arc - + Pick aperture angle Trieu l'angle d'obertura - - + + Arc by 3 points Arc per tres punts - + Create Arc by 3 points Create Arc by 3 points @@ -3749,7 +3749,7 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Commuta la graella - + Select an object to edit Selecciona un objecte per a editar @@ -3764,17 +3764,17 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Editar node - + No edit point found for selected object No s`ha trobat cap punt d'edició per l'objecte seleccionat - + Too many objects selected, max number set to: S'han seleccionat massa objectes, el màxim està establert en: - + : this object is not editable : aquest objete no es editable @@ -3804,13 +3804,13 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si.Desa el fitxer d'estils - + Select an object to project Seleccioneu un objecte a projectar - - + + Create Point Crear Punt @@ -3826,31 +3826,31 @@ Per habilitar FreeCAD a descarregar aquestes llibreries, respongui Si. - + Base angle Angle de base - + The base angle you wish to start the rotation from L'angle de base d'on voleu iniciar la rotació - + Pick base angle Trieu angle de base - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. La quantitat de rotació que voleu realitzar. @@ -3858,7 +3858,7 @@ L'angle final serà l'angle de base més aquesta quantitat. - + Pick rotation angle Trieu angle de rotació @@ -3963,12 +3963,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Polígon - + Create Polygon (Part) Crea Polígon (Peça) - + Create Polygon Crea Polígon @@ -3978,7 +3978,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Cliqueu a aqualsevol punt d'una línia per a dividir-la. - + Split line Dividir línia @@ -3988,8 +3988,8 @@ L'angle final serà l'angle de base més aquesta quantitat. Seleccioneu objecte(s) per a retallar o allargar - + Pick distance Tria la distància @@ -4029,14 +4029,14 @@ L'angle final serà l'angle de base més aquesta quantitat. S'ha tancat la Spline - + Last point has been removed S'ha esborrat l'últim punt - + Create B-spline Crea un B-spline @@ -4198,14 +4198,14 @@ L'angle final serà l'angle de base més aquesta quantitat. El·lipse - - + + Create Ellipse Crear El·lipse - - + + Pick opposite point Tria el punt oposat @@ -4298,25 +4298,25 @@ L'angle final serà l'angle de base més aquesta quantitat. Cota - - - - + + + + Create Dimension Crea una cota - + Create Dimension (radial) Crea una cota (radial) - + Edge too short! Aresta massa curta! - + Edges don't intersect! Les arestes no intersequen! @@ -4346,12 +4346,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Tria el punt final del desplaçament - + Turning one Rectangle into a Wire Transformant un rectangle en una Polilínia - + Stretch Estira @@ -4361,12 +4361,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Rectangle - + Create Plane Crear Pla - + Create Rectangle Crear Rectangle @@ -4381,13 +4381,13 @@ L'angle final serà l'angle de base més aquesta quantitat. Escull el punt inicial de la línia de simetria - + Mirror Simetria - - + + Pick end point of mirror line Escull el punt final de la línia de simetria @@ -4397,17 +4397,17 @@ L'angle final serà l'angle de base més aquesta quantitat. Path twisted array - + Select an object to clone Selecciona un objecte per clonar - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4417,13 +4417,13 @@ L'angle final serà l'angle de base més aquesta quantitat. Canvia el pendent - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4448,7 +4448,7 @@ L'angle final serà l'angle de base més aquesta quantitat. L'Equidistància d'una corba de Bezier no és possible actualment - + Create 2D view Crea una vista 2D @@ -4468,14 +4468,14 @@ L'angle final serà l'angle de base més aquesta quantitat. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4486,26 +4486,26 @@ L'angle final serà l'angle de base més aquesta quantitat. Matriu polar - - + + At least one element must be selected. Com a mínim s'ha de seleccionar un element. - - + + Selection is not suitable for array. La selecció no és apta per a una matriu. - - - - + + + + Object: Objecte: @@ -4525,16 +4525,16 @@ L'angle final serà l'angle de base més aquesta quantitat. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4549,8 +4549,8 @@ L'angle final serà l'angle de base més aquesta quantitat. Angle polar: - + Center of rotation: Centre de rotació: @@ -4669,17 +4669,17 @@ L'angle final serà l'angle de base més aquesta quantitat. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4806,38 +4806,35 @@ L'angle final serà l'angle de base més aquesta quantitat. No es pot generar la forma: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Entrada incorrecta: ha de ser un nombre. - - - - + @@ -4847,18 +4844,21 @@ L'angle final serà l'angle de base més aquesta quantitat. - + + + + Wrong input: must be a vector. Entrada incorrecta: ha de ser un vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4875,8 +4875,8 @@ L'angle final serà l'angle de base més aquesta quantitat. Input: single value expanded to vector. - + Wrong input: must be an integer number. Entrada incorrecta: ha de ser un nombre enter. @@ -4890,7 +4890,7 @@ L'angle final serà l'angle de base més aquesta quantitat. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: ha de ser un posicionament, un vector o una rotació. @@ -4955,12 +4955,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Entrada incorrecta: ha de ser una llista de dos elements. P. ex. [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Entrada incorrecta: l'objecte té el tipus equivocat. @@ -5287,9 +5287,9 @@ L'angle final serà l'angle de base més aquesta quantitat. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5476,7 +5476,7 @@ from menu Tools -> Addon Manager Error: no es troba el mòdul json. No es pot desar l'estil - + Clone Clona @@ -5487,21 +5487,21 @@ from menu Tools -> Addon Manager Pendent - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La direcció d'equidistància no ha sigut definida. Per favor, mou el cursor a un costat o altre de l'objecte per indicar-ne la direcció - - + + True Cert - - + + False Fals @@ -5811,12 +5811,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6090,12 +6090,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Mou - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6122,12 +6122,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc per tres punts - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6137,12 +6137,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6190,32 +6190,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Afegeix punt - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7106,19 +7080,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7162,8 +7136,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7178,9 +7152,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7309,8 +7283,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8113,14 +8087,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Mida de la fletxa - + Arrow type Tipus de fletxa diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index d3d690b424..e1682260c4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index e50d0051b1..1f75576679 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -1545,7 +1545,6 @@ pattern definitions to be added to the standard patterns Velikost písma - @@ -1553,6 +1552,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1653,8 +1653,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1976,9 +1976,9 @@ ze Správce doplňků. Povolit FreeCADu automaticky stáhnout a aktualizovat DXF knihovny - - + + Import options Možnosti importu @@ -2196,8 +2196,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Pokud je nastavena na '0', celý spline se považuje za přímý segment. - + Export options Možnosti exportu @@ -2474,8 +2474,8 @@ These lines are thicker than normal grid lines. Toto je metoda, kterou FreeCAD použije k převodu souborů DWG do DXF. Pokud je zvoleno "Automaticky", FreeCAD se pokusí najít jeden z následujících převodníků ve stejném pořadí, v jakém jsou uvedeny zde. Pokud FreeCAD nemůže žádný najít, možná budete muset vybrat konkrétní převodník a uvést jeho cestu zde pod. Vyberte nástroj "dwg2dxf", pokud používáte LibreDWG, "ODAFileConverter", pokud používáte konvertor souborů ODA, nebo nástroj "dwg2dwg", pokud používáte profesionální verzi QCAD. - + Automatic Automaticky @@ -2770,8 +2770,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3180,7 +3180,7 @@ Není k dispozici, pokud je povolena možnost předvolby návrhu „Použít zá - + Rotate Otočit @@ -3203,7 +3203,7 @@ Není k dispozici, pokud je povolena možnost předvolby návrhu „Použít zá - + Offset Odstup @@ -3396,59 +3396,59 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Nastavte měřítko používané nástroji pro poznámky návrhu - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Žádný aktivní dokument. Přerušení. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Nelze vložit nový objekt do upravené součásti - + Symbol not implemented. Using a default symbol. Symbol není implementován. Použití výchozího symbolu. - + image is Null obrázek je Null - + filename does not exist on the system or in the resource file název_souboru neexistuje v systému ani v souboru prostředků - + unable to load texture nelze načíst texturu - + Does not have 'ViewObject.RootNode'. Nemá 'ViewObject.RootNode'. @@ -3556,65 +3556,65 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Vyberte cílový bod - + Create Label Vytvořit štítek - - + + Pick endpoint of leader line Vyberte koncový bod odkazové čáry - - + + Pick text position Vyberte polohu textu - - - + + + Pick first point Vyberte první bod - + Create Line Vytvořit čáru - + Create Wire Vytvořit drát - + Polyline Lomená čára - - - - - - - + + + + + + + Pick next point Vybrat další bod - + Unable to create a Wire from selected objects Nelze vytvořit drát z vybraných objektů - + Convert to Wire Převést na drát @@ -3639,54 +3639,54 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Vyberte bod umístění - + Create Text Vytvořit text - + Select an object to convert. Vyberte objekt, který chcete převést. - + Convert to Sketch Převést na Sketch - + Convert to Draft Převést na koncept - + Convert Draft/Sketch Převést koncept/náčrt - + Select an object to move Vyberte objekt, který chcete přesunout - + Pick start point Vyberte počáteční bod - - + + Pick end point Vyberte koncový bod - + Move Přesun - - + + Some subelements could not be moved. Některé dílčí prvky nebylo možné přesunout. @@ -3697,75 +3697,75 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Vyberte středový bod - - - + + + - + Pick radius Vyberte poloměr - - - + + + Start angle Počáteční úhel - - + + Pick start angle Vyberte počáteční úhel - - - + + + Aperture angle Úhel clony - + Pick aperture Vyberte clonu - + Create Circle (Part) Vytvořit kruh (část) - + Create Circle Vytvořte kruh - + Create Arc (Part) Vytvořit oblouk (část) - + Create Arc Vytvořit oblouk - + Pick aperture angle Vyberte úhel clony - - + + Arc by 3 points Oblouk o 3 body - + Create Arc by 3 points Create Arc by 3 points @@ -3775,7 +3775,7 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Přepnout mřížku - + Select an object to edit Vyberte objekt, který chcete upravit @@ -3790,17 +3790,17 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Upravit uzel - + No edit point found for selected object Pro vybraný objekt nebyl nalezen žádný editační bod - + Too many objects selected, max number set to: Je vybráno příliš mnoho objektů, maximální počet nastaven na: - + : this object is not editable : Tento objekt nelze upravovat @@ -3830,13 +3830,13 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano.Uložit soubor stylů - + Select an object to project Vyberte objekt, který chcete promítnout - - + + Create Point Vytvořit bod @@ -3852,31 +3852,31 @@ Chcete-li povolit FreeCAD stahování těchto knihoven, odpovězte Ano. - + Base angle Základní úhel - + The base angle you wish to start the rotation from Základní úhel, ze kterého chcete začít otáčení - + Pick base angle Vyberte úhel základny - + Rotation Rotace - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Míra rotace, kterou chcete provést. @@ -3884,7 +3884,7 @@ Konečný úhel bude základní úhel plus tato hodnota. - + Pick rotation angle Vyberte úhel natočení @@ -3989,12 +3989,12 @@ Konečný úhel bude základní úhel plus tato hodnota. Mnohoúhelník - + Create Polygon (Part) Vytvořit mnohoúhelník (část) - + Create Polygon Vytvořte mnohoúhelník @@ -4004,7 +4004,7 @@ Konečný úhel bude základní úhel plus tato hodnota. Klepnutím kamkoli na řádek jej rozdělíte. - + Split line Dělená čára @@ -4014,8 +4014,8 @@ Konečný úhel bude základní úhel plus tato hodnota. Vyberte objekty, které chcete oříznout nebo prodloužit - + Pick distance Vyberte vzdálenost @@ -4055,14 +4055,14 @@ Konečný úhel bude základní úhel plus tato hodnota. Spline byl uzavřen - + Last point has been removed Poslední bod byl odstraněn - + Create B-spline Vytvořit B-splajn @@ -4224,14 +4224,14 @@ Konečný úhel bude základní úhel plus tato hodnota. Elipsa - - + + Create Ellipse Vytvořte Elipsu - - + + Pick opposite point Vyberte opačný bod @@ -4324,25 +4324,25 @@ Konečný úhel bude základní úhel plus tato hodnota. Rozměr - - - - + + + + Create Dimension Vytvořit kótu - + Create Dimension (radial) Vytvořit kótu (radiální) - + Edge too short! Hrana je příliš krátká! - + Edges don't intersect! Hrany se neprotínají! @@ -4372,12 +4372,12 @@ Konečný úhel bude základní úhel plus tato hodnota. Vyberte koncový bod posunutí - + Turning one Rectangle into a Wire Proměna jednoho obdélníku na drát - + Stretch Roztažení @@ -4387,12 +4387,12 @@ Konečný úhel bude základní úhel plus tato hodnota. Obdélník - + Create Plane Vytvořit rovinu - + Create Rectangle Vytvořte obdélník @@ -4407,13 +4407,13 @@ Konečný úhel bude základní úhel plus tato hodnota. Vyberte počáteční bod zrcadlové čáry - + Mirror Zrcadlo - - + + Pick end point of mirror line Vyberte koncový bod přímky zrcadlení @@ -4423,17 +4423,17 @@ Konečný úhel bude základní úhel plus tato hodnota. Zkrocená cesta - + Select an object to clone Vyberte objekt, který chcete klonovat - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4443,13 +4443,13 @@ Konečný úhel bude základní úhel plus tato hodnota. Změnit sklon - - + + Select an object to upgrade Vyberte objekt, který chcete upgradovat - + Upgrade Aktualizovat @@ -4474,7 +4474,7 @@ Konečný úhel bude základní úhel plus tato hodnota. Offset Bézierových křivek není aktuálně podporován - + Create 2D view Vytvořte 2D pohled @@ -4494,14 +4494,14 @@ Konečný úhel bude základní úhel plus tato hodnota. Vyléčit - + Downgrade Přejít na nižší verzi - - + + Task panel: Panel úkolů: @@ -4512,26 +4512,26 @@ Konečný úhel bude základní úhel plus tato hodnota. Polární pole - - + + At least one element must be selected. Musí být vybrán alespoň jeden prvek. - - + + Selection is not suitable for array. Výběr není vhodný pro pole. - - - - + + + + Object: Objekt: @@ -4551,16 +4551,16 @@ Konečný úhel bude základní úhel plus tato hodnota. Úhel je pod -360 stupňů. Pro pokračování je nastavena na tuto hodnotu. - - + + Fuse: Pojistka: - - + + Create Link array: Vytvořit pole odkazů: @@ -4575,8 +4575,8 @@ Konečný úhel bude základní úhel plus tato hodnota. Polární úhel: - + Center of rotation: Střed otáčení: @@ -4695,17 +4695,17 @@ Konečný úhel bude základní úhel plus tato hodnota. změněn typ vlastnosti „Tracking“ - + ShapeString: oblique angle must be in the -80 to +80 degree range Tvar písma: kosý úhel musí být v rozmezí od –80 do +80 stupňů - + ShapeString: string has no wires Tvar písma: řetězec nemá žádné dráty - + ShapeString: face creation failed for one character Tvar písma: vytvoření plochy se nezdařilo pro jeden znak @@ -4832,38 +4832,35 @@ Konečný úhel bude základní úhel plus tato hodnota. Nelze vygenerovat tvar: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Chybné zadání: musí to být číslo. - - - - + @@ -4873,18 +4870,21 @@ Konečný úhel bude základní úhel plus tato hodnota. - + + + + Wrong input: must be a vector. Chybný vstup: musí to být vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Chybný vstup: musí to být seznam nebo n-tice řetězců nebo jeden řetězec. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Nesprávný vstup: musí být „Original“, „Frenet“ nebo „Tangent“. @@ -4901,8 +4901,8 @@ Konečný úhel bude základní úhel plus tato hodnota. Vstup: jedna hodnota rozšířena na vektor. - + Wrong input: must be an integer number. Chybný vstup: musí to být celé číslo. @@ -4916,7 +4916,7 @@ Konečný úhel bude základní úhel plus tato hodnota. - + Wrong input: must be a placement, a vector, or a rotation. Chybný vstup: musí to být umístění, vektor nebo otočení. @@ -4981,12 +4981,12 @@ Konečný úhel bude základní úhel plus tato hodnota. Chybný vstup: musí jít o seznam dvou prvků. Například [objekt, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Špatný vstup: objekt má nesprávný typ. @@ -5313,9 +5313,9 @@ Konečný úhel bude základní úhel plus tato hodnota. přidána vlastnost zobrazení 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' přejmenoval možnosti 'DisplayMode' na 'World/Screen' @@ -5502,7 +5502,7 @@ z nabídky Nástroje -> Správce doplňků Chyba: modul json nebyl nalezen. Styl nelze uložit - + Clone Klon @@ -5513,21 +5513,21 @@ z nabídky Nástroje -> Správce doplňků Sklon - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Směr odsazení není definován. Nejprve pohybujte myší na obě strany objektu, abyste označili směr - - + + True Pravda - - + + False Nepravda @@ -5837,12 +5837,12 @@ budou použity k poskytování informací na štítku. Draft_Wire - + Polyline Lomená čára - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Vytvoří čáru s více body (křivku). CTRL pro přichycení, SHIFT pro omezení. @@ -6116,12 +6116,12 @@ Jedna skica s odpojenými stopami však bude převedena na několik samostatnýc Draft_Move - + Move Přesun - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6148,12 +6148,12 @@ CTRL pro přichycení, SHIFT pro omezení. Draft_Arc_3Points - + Arc by 3 points Oblouk o 3 body - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Vytvoří kruhový oblouk výběrem 3 bodů. @@ -6163,12 +6163,12 @@ CTRL pro přichycení, SHIFT pro omezení. Draft_ArcTools - + Arc tools Obloukové nástroje - + Create various types of circular arcs. Vytvářejte různé typy kruhových oblouků. @@ -6216,32 +6216,6 @@ Stisknutím E nebo ALT+levým kliknutím zobrazíte kontextovou nabídku na podporovaných uzlech a na podporovaných objektech. - - Draft_AddPoint - - - Add point - Přidat bod - - - - Adds a point to an existing Wire or B-spline. - Přidá bod k existujícímu drátu nebo B-spline. - - - - Draft_DelPoint - - - Remove point - Odstraňte bod - - - - Removes a point from an existing Wire or B-spline. - Odebere bod z existujícího drátu nebo B-spline. - - Draft_CircularArray @@ -7133,19 +7107,19 @@ nastavte True pro fúzi nebo False pro sloučeninu - + Create a face Vytvořte obličej + + - - The area of this object Rozloha tohoto objektu @@ -7189,8 +7163,8 @@ nastavte True pro fúzi nebo False pro sloučeninu Základní objekt, který bude duplikován. - + The object along which the copies will be distributed. It must contain 'Edges'. Objekt, podél kterého budou kopie distribuovány. Musí obsahovat 'Edges'. @@ -7205,9 +7179,9 @@ nastavte True pro fúzi nebo False pro sloučeninu Rotační faktor krouceného pole. - - + + Show the individual array elements (only for Link arrays) Zobrazit jednotlivé prvky pole (pouze pro pole Link) @@ -7336,8 +7310,8 @@ Při použití uloženého stylu se některé vlastnosti pohledu stanou pouze pr budou upravitelné pouze změnou stylu pomocí nástroje 'Editor stylu poznámky'. - + The base object that will be duplicated Základní objekt, který bude duplikován @@ -8140,14 +8114,14 @@ Pro výchozí nastavení systému ponechte prázdné. Použijte 'oblouk' k vynucení americké obloukové notace - + Arrow size Velikost šipky - + Arrow type Typ šipky @@ -8212,7 +8186,7 @@ za kótovací čárou Draft - Zkosení + Návrh diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 6b447a1380..db7ff160f1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 3460e23e13..4af6311262 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -658,7 +658,7 @@ Dies funktioniert nur, wenn "Verknüpfungsanordnung" deaktiviert ist. Fuse - Vereinigen + Vereinigung @@ -1535,10 +1535,9 @@ pattern definitions to be added to the standard patterns Font size - Schrifthöhe + Schriftgröße - @@ -1546,6 +1545,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1646,8 +1646,8 @@ des Maßstabs im Widget Beschriftungsmaßstab. Ist der Maßstab 1:100, ist der M Die Standard-Linienbreite - + px px @@ -1968,9 +1968,9 @@ im Addon Manager installieren. FreeCAD das automatische Herunterladen und Aktualisieren der DXF-Bibliotheken erlauben - - + + Import options Import Einstellungen @@ -2187,8 +2187,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Wenn sie auf '0' gesetzt ist, wird der gesamte Spline als geradliniger Abschnitt behandelt. - + Export options Export Einstellungen @@ -2465,8 +2465,8 @@ Diese Linien sind dicker als normale Rasterlinien. Dies ist die Methode, die FreeCAD für die Konvertierung von DWG-Dateien in DXF verwendet. Wenn Sie "Automatisch" wählen, wird FreeCAD versuchen, einen der folgenden Konverter in der Reihenfolge zu finden, in der sie hier angezeigt werden. Wenn FreeCAD keinen Konverter findet, müssen Sie einen bestimmten Konverter auswählen und dessen Pfad hier unten angeben. Wählen Sie "dwg2dxf", wenn Sie LibreDWG verwenden, "ODAFileConverter", wenn Sie den ODA-Dateikonverter verwenden, oder "dwg2dwg", wenn Sie die Pro-Version von QCAD verwenden. - + Automatic Automatisch @@ -2761,8 +2761,8 @@ Diese Linien sind dicker als normale Rasterlinien. - - + + @@ -3170,7 +3170,7 @@ Nicht verfügbar, wenn die Option "Part-Grundkörper erstellen, wenn möglich" a - + Rotate Drehen @@ -3193,9 +3193,9 @@ Nicht verfügbar, wenn die Option "Part-Grundkörper erstellen, wenn möglich" a - + Offset - Versetzen + Versatz @@ -3384,59 +3384,59 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Maßstab für Draft-Beschriftungswerkzeuge festlegen - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Kein aktives Dokument. Abbruch. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Falsche Eingabe: Objekt {} nicht im Dokument. - + Unable to insert new object into a scaled part Kann kein neues Objekt in einen skaliertes Teil einfügen - + Symbol not implemented. Using a default symbol. Symbol nicht implementiert. Ein Standardsymbol wird verwendet. - + image is Null Bild ist Null - + filename does not exist on the system or in the resource file Dateiname existiert nicht auf dem System oder in der Ressourcendatei - + unable to load texture Textur kann nicht geladen werden - + Does not have 'ViewObject.RootNode'. Hat keinen 'ViewObject.RootNode'. @@ -3509,7 +3509,7 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja". Wrong input: unknown document {} - Wrong input: unknown document {} + Falsche Eingabe: unbekanntes Dokument {} @@ -3544,65 +3544,65 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Zielpunkt auswählen - + Create Label Hinweis erstellen - - + + Pick endpoint of leader line Endpunkt der Hinweislinie auswählen - - + + Pick text position Textposition auswählen - - - + + + Pick first point Ersten Punkt auswählen - + Create Line Linie erstellen - + Create Wire Erzeuge Kante - + Polyline Polylinie - - - - - - - + + + + + + + Pick next point Nächsten Punkt auswählen - + Unable to create a Wire from selected objects Es kann kein Kantenzug von den ausgewählten Objekten erstellt werden - + Convert to Wire Umwandlung in Kantenzug @@ -3627,54 +3627,54 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Wähle Position - + Create Text Text erstellen - + Select an object to convert. Wählen Sie ein Objekt zum Umwandeln aus. - + Convert to Sketch In Skizze umwandeln - + Convert to Draft In einen Entwurf umwandeln - + Convert Draft/Sketch Zeichnung/Skizze konvertieren - + Select an object to move Wählen Sie ein Objekt zum Verschieben aus - + Pick start point Wählen Sie den Startpunkt - - + + Pick end point Endpunkt auswählen - + Move Verschieben - - + + Some subelements could not be moved. Einige Unterelemente konnten nicht verschoben werden. @@ -3685,77 +3685,77 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Mittelpunkt auswählen - - - + + + - + Pick radius Radius auswählen - - - + + + Start angle Startwinkel - - + + Pick start angle Startwinkel auswählen - - - + + + Aperture angle Öffnungswinkel - + Pick aperture Öffnung wählen - + Create Circle (Part) Kreis erstellen (Teil) - + Create Circle Kreis erstellen - + Create Arc (Part) Bogen erstellen (Part) - + Create Arc Bogen erstellen - + Pick aperture angle Öffnungswinkel wählen - - + + Arc by 3 points Bogen aus 3 Punkten - + Create Arc by 3 points - Create Arc by 3 points + Kreisbogen durch drei Punkte erstellen @@ -3763,7 +3763,7 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Raster umschalten - + Select an object to edit Wähle ein Objekt zum Bearbeiten aus @@ -3778,17 +3778,17 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Knoten bearbeiten - + No edit point found for selected object Für das ausgewählte Objekt konnte kein Bearbeitungspunkt gefunden werden - + Too many objects selected, max number set to: Zu viele Objekte ausgewählt, die maximale Anzahl beträgt: - + : this object is not editable : dieses Objekt kann nicht bearbeitet werden @@ -3818,13 +3818,13 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja".Stil-Datei speichern - + Select an object to project Wählen Sie ein zu projizierendes Objekt aus - - + + Create Point Punkt erstellen @@ -3840,31 +3840,31 @@ Um FreeCAD zu erlauben, diese Bibliotheken herunterzuladen, wählen Sie "Ja". - + Base angle Basiswinkel - + The base angle you wish to start the rotation from Der Basiswinkel, von dem aus die Drehung gestartet werden soll - + Pick base angle Basiswinkel auswählen - + Rotation Drehung - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Die Menge an Rotation, die Sie ausführen möchten. @@ -3872,7 +3872,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. - + Pick rotation angle Drehwinkel auswählen @@ -3977,12 +3977,12 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Vieleck - + Create Polygon (Part) Vieleck erstellen (Part) - + Create Polygon Vieleck erstellen @@ -3992,7 +3992,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Klicken Sie irgendwo auf einer Linie, um sie aufzuteilen. - + Split line Linie teilen @@ -4002,8 +4002,8 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Wählen Sie Objekt(e) zum verkürzen/verlängern - + Pick distance Abstand auswählen @@ -4043,14 +4043,14 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Spline wurde geschlossen - + Last point has been removed Der letzte Punkt wurde entfernt - + Create B-spline B-Spline erstellen @@ -4212,14 +4212,14 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Ellipse - - + + Create Ellipse Ellipse erstellen - - + + Pick opposite point Gegenüberliegenden Punkt auswählen @@ -4312,25 +4312,25 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Maß - - - - + + + + Create Dimension Bemaßung erstellen - + Create Dimension (radial) Maß erstellen (radial) - + Edge too short! Kante zu kurz! - + Edges don't intersect! Kanten schneiden sich nicht! @@ -4360,12 +4360,12 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Endpunkt der Verschiebung auswählen - + Turning one Rectangle into a Wire Verwandle ein Rechteck in Kantenzug - + Stretch Strecken @@ -4375,12 +4375,12 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Rechteck - + Create Plane Ebene erstellen - + Create Rectangle Rechteck erstellen @@ -4395,13 +4395,13 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Startpunkt der Spiegellinie auswählen - + Mirror Spiegeln - - + + Pick end point of mirror line Endpunkt der Spiegellinie auswählen @@ -4411,19 +4411,19 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Pfad-Anordnung mit Drehung - + Select an object to clone Wählen Sie ein Objekt zum Klonen aus - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Abbruch: Objekt(e) ohne Form nicht klonbar - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Überspringen: Objekt(e) ohne Form nicht klonbar @@ -4431,13 +4431,13 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Neigung ändern - - + + Select an object to upgrade Ein Objekt zum Hochstufen auswählen - + Upgrade Hochstufen @@ -4462,7 +4462,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Versatz von Bezierkurven wird derzeit nicht unterstützt - + Create 2D view 2D-Ansicht erstellen @@ -4482,14 +4482,14 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Heilen - + Downgrade Zurückstufen - - + + Task panel: Taskleiste: @@ -4497,29 +4497,29 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Polar array - Polare Anordnung + Polare Reihe - - + + At least one element must be selected. Es muss mindestens ein Element ausgewählt werden. - - + + Selection is not suitable for array. Die Auswahl ist für Anordnungen ungeeignet. - - - - + + + + Object: Objekt: @@ -4539,16 +4539,16 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Der Winkel liegt unter -360 Grad. Dieser Wert wird gesetzt, um fortzufahren. - - + + Fuse: Vereinigen: - - + + Create Link array: Verknüpfungsanordnung erstellen: @@ -4563,8 +4563,8 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Polarwinkel: - + Center of rotation: Drehpunkt: @@ -4625,7 +4625,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Circular array - Kreisförmige Reihe + Kreisförmige Anordnung @@ -4683,17 +4683,17 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. geänderter 'Tracking' Eigenschaftstyp - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: Neigungswinkel muss zwischen -80 und +80 Grad liegen - + ShapeString: string has no wires ShapeString: Die Zeichenfolge hat keine Linien - + ShapeString: face creation failed for one character ShapeString: Flächenerstellung für ein Zeichen fehlgeschlagen @@ -4775,12 +4775,12 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Two objects are needed. - Two objects are needed. + Es werden zwei Objekte benötigt. One object is not valid. - One object is not valid. + Ein Objekt ist nicht gültig. @@ -4820,38 +4820,35 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Kann Form nicht erzeugen: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Falsche Eingabe: base_object nicht im Dokument. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Falsche Eingabe: path_object nicht im Dokument. - - - - - - + + + + + + Wrong input: must be a number. Falsche Eingabe: muss eine Zahl sein. - - - - + @@ -4861,18 +4858,21 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. - + + + + Wrong input: must be a vector. Falsche Eingabe: muss ein Vektor sein. - + Wrong input: must be a list or tuple of strings, or a single string. Falsche Eingabe: muss eine Liste oder ein Tupel von Zeichenketten oder eine einzelne Zeichenkette sein. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Falsche Eingabe: 'muss Original', 'Frenet' oder 'Tangent' sein. @@ -4889,8 +4889,8 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Eingabe: Einzelwert auf Vektor erweitert. - + Wrong input: must be an integer number. Falsche Eingabe: muss eine Ganzzahl sein. @@ -4904,7 +4904,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. - + Wrong input: must be a placement, a vector, or a rotation. Falsche Eingabe: muss eine Platzierung, ein Vektor oder eine Drehung sein. @@ -4912,22 +4912,22 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Falsche Eingabe: target_object darf keine Liste sein. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Falsche Eingabe: target_object nicht im Dokument. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Falsche Eingabe: Unterelemente müssen eine Liste oder ein Tupel von Zeichenketten oder ein einzelner String sein. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Falsche Eingabe: Unterelement {} nicht im Objekt. @@ -4956,7 +4956,7 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Falsche Eingabe: Punkte {} müssen eine Liste von mindestens zwei Vektoren sein. @@ -4969,12 +4969,12 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Falsche Eingabe: muss eine Liste von zwei Elementen sein. Zum Beispiel [Objekt, 'Edge1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Falsche Eingabe: point_object nicht im Dokument. - + Wrong input: object has the wrong type. Falsche Eingabe: Objekt hat den falschen Typ. @@ -4991,13 +4991,13 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Falsche Eingabe: edge_object darf keine Liste oder Tupel sein. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Falsche Eingabe: edge_object nicht im Dokument. @@ -5301,9 +5301,9 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Ansicht-Eigenschaft 'Textfarbe' hinzugefügt - - + + renamed 'DisplayMode' options to 'World/Screen' 'DisplayMode'-Optionen in 'World/Screen' umbenannt @@ -5490,7 +5490,7 @@ aus dem Menü Extras -> Addon Manager Fehler: json-Modul nicht gefunden. Stil konnte nicht gespeichert werden - + Clone Klonen @@ -5501,21 +5501,21 @@ aus dem Menü Extras -> Addon Manager Neigung - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Versatz-Richtung ist nicht definiert. Bitte bewegen Sie die Maus zunächst auf eine Seite des Objekts, um die Richtung festzulegen - - + + True Ja - - + + False Nein @@ -5643,7 +5643,7 @@ aus dem Menü Extras -> Addon Manager Label - Benennung + Beschriftung @@ -5785,7 +5785,7 @@ Eine 'Verknüpfungsanordnung' ist effektiver, wenn viele Kopien verarbeitet werd Label - Bezeichnung + Benennung @@ -5825,12 +5825,12 @@ STRG zum Fangen, SHIFT zum Festlegen. Draft_Wire - + Polyline Polylinie - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Erstellt einen Linienzug (polyline). STRG zum Fangen, SHIFT zum Festlegen. @@ -6105,12 +6105,12 @@ Eine einzelne Skizze mit nicht verbundenen Linien wird jedoch in mehrere einzeln Draft_Move - + Move Verschieben - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6137,12 +6137,12 @@ STRG zum Fangen, SHIFT zum Festlegen. Draft_Arc_3Points - + Arc by 3 points Bogen aus 3 Punkten - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Erstellt einen Kreisbogen, durch Anwahl von 3 Punkten. @@ -6152,12 +6152,12 @@ STRG zum Fangen, SHIFT zum Festlegen. Draft_ArcTools - + Arc tools Bogenwerkzeuge - + Create various types of circular arcs. Erstellt verschiedene Arten von Kreisbögen. @@ -6204,38 +6204,12 @@ on supported nodes and on supported objects. Mit E oder Alt+Linksklick wird das Kontextmenü an unterstützten Knoten und Objekten angezeigt. - - Draft_AddPoint - - - Add point - Punkt hinzufügen - - - - Adds a point to an existing Wire or B-spline. - Fügt einen Punkt zu vorhandener Linie oder B-Spline hinzu. - - - - Draft_DelPoint - - - Remove point - Punkt entfernen - - - - Removes a point from an existing Wire or B-spline. - Entfernt einen Punkt aus vorhandener Linie oder B-Spline. - - Draft_CircularArray Circular array - Kreisförmige Anordnung + Kreisförmige Reihe @@ -6324,7 +6298,7 @@ Erstellen Sie zuerst eine Gruppe, um dieses Werkzeug zu verwenden. Autogroup - Autogruppe + Automatische Gruppe @@ -6412,7 +6386,7 @@ Wenn andere Objekte ausgewählt sind, werden diese ignoriert. Fillet - Verrundung + Abrundung @@ -6721,7 +6695,7 @@ Dies ist für geschlossene Formen und Volumenkörper vorgesehen und wirkt sich n Dimension - Abmessung + Maß @@ -6845,7 +6819,7 @@ Der resultierende Klon kann in jeder seiner drei Richtungen skaliert werden. Polar array - Polare Reihe + Polare Anordnung @@ -6907,7 +6881,7 @@ und mehrere Flächen zu einer einzigen zusammengefasst werden. Offset - Versatz + Versetzen @@ -7120,19 +7094,19 @@ Wahr für Fusion oder Falsch für Verbund - + Create a face Fläche erzeugen + + - - The area of this object Die Fläche dieses Objekts @@ -7176,8 +7150,8 @@ Wahr für Fusion oder Falsch für Verbund Das Ausgangsobjekt, welches dupliziert wird. - + The object along which the copies will be distributed. It must contain 'Edges'. Das Objekt, an dem entlang die Kopien verteilt werden. Es muss 'Kanten' enthalten. @@ -7192,9 +7166,9 @@ Wahr für Fusion oder Falsch für Verbund Rotationsfaktor für Anordnungen mit Drehung. - - + + Show the individual array elements (only for Link arrays) Die einzelnen Elemente der Anordnung anzeigen (nur für Verknüpfungsanordnungen) @@ -7329,8 +7303,8 @@ Bei Verwendung eines gespeicherten Stils sind einige der Ansichtseigenschaften s Sie können nur bearbeitet werden, indem der Stil über das Tool 'Anmerkungsstil-Editor' geändert wird. - + The base object that will be duplicated Das Ausgangsobjekt, welches dupliziert wird @@ -8133,14 +8107,14 @@ Leer lassen für die Standardeinstellung des Systems. Benutzen Sie 'arch' um die US-Bogen Notation zu erzwingen - + Arrow size Pfeilgröße - + Arrow type Pfeiltyp @@ -8203,7 +8177,7 @@ beyond the dimension line Draft - Tiefgang + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index ab4a113ceb..cea99ab5b6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index ceabed1c82..f0b2d8adce 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -1542,7 +1542,6 @@ pattern definitions to be added to the standard patterns Μέγεθος γραμματοσειράς - @@ -1550,6 +1549,7 @@ pattern definitions to be added to the standard patterns + mm χιλιοστά @@ -1650,8 +1650,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1973,9 +1973,9 @@ from the Addon Manager. Να επιτρέπεται στο FreeCAD να κατεβάζει και ανανεώνει αυτόματα τις βιβλιοθήκες DXF - - + + Import options Επιλογές εισαγωγής @@ -2193,8 +2193,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Επιλογές εξαγωγής @@ -2471,8 +2471,8 @@ These lines are thicker than normal grid lines. Αυτή είναι η μέθοδος που θα χρησιμοποιήσει το FreeCAD για τη μετατροπή αρχείων DWG σε DXF. Αν επιλεγεί το "Automatic", το FreeCAD θα προσπαθήσει να βρει έναν από τους παρακάτω μετατροπείς με την ίδια σειρά που εμφανίζονται εδώ. Αν το FreeCAD δεν είναι σε θέση να βρει, ίσως χρειαστεί να επιλέξετε ένα συγκεκριμένο μετατροπέα και να υποδείξετε τη διαδρομή του εδώ κάτω. Επιλέξτε το βοηθητικό πρόγραμμα "dwg2dxf" αν χρησιμοποιείτε το LibreDWG, "ODAFileConverter" εάν χρησιμοποιείτε το μετατροπέα αρχείων ODA, ή το βοηθητικό πρόγραμμα "dwg2dwg" εάν χρησιμοποιείτε την pro έκδοση του QCAD. - + Automatic Αυτόματη @@ -2767,8 +2767,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3070,7 +3070,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Undo - Undo + Αναίρεση @@ -3177,7 +3177,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Περιστρέψτε @@ -3200,7 +3200,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Μετατοπίστε @@ -3393,59 +3393,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3553,65 +3553,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3636,54 +3636,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Μετακινήστε - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3694,75 +3694,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3772,7 +3772,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3787,17 +3787,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3827,13 +3827,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3849,31 +3849,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3881,7 +3881,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3986,12 +3986,12 @@ The final angle will be the base angle plus this amount. Πολύγωνο - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4001,7 +4001,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4011,8 +4011,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4052,14 +4052,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Δημιουργία καμπύλης B-spline @@ -4221,14 +4221,14 @@ The final angle will be the base angle plus this amount. Έλλειψη - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4321,25 +4321,25 @@ The final angle will be the base angle plus this amount. Διάσταση - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4369,12 +4369,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4384,12 +4384,12 @@ The final angle will be the base angle plus this amount. Ορθογώνιο - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4404,13 +4404,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4420,17 +4420,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4440,13 +4440,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4471,7 +4471,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4491,14 +4491,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4509,26 +4509,26 @@ The final angle will be the base angle plus this amount. Κυκλική διάταξη - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4548,16 +4548,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4572,8 +4572,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4692,17 +4692,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4829,38 +4829,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4870,18 +4867,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4898,8 +4898,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4913,7 +4913,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4978,12 +4978,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5310,9 +5310,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' μετονομάστε τις επιλογές 'Λειτουργία εμφάνισης' σε 'World/Screen' @@ -5499,7 +5499,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Κλωνοποιήστε @@ -5510,21 +5510,21 @@ from menu Tools -> Addon Manager Slope - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Αληθές - - + + False Ψευδές @@ -5828,12 +5828,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6107,12 +6107,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Μετακινήστε - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6139,12 +6139,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6154,12 +6154,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6207,32 +6207,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7124,19 +7098,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7180,8 +7154,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7196,9 +7170,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7325,8 +7299,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8129,14 +8103,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Μέγεθος βέλους - + Arrow type Τύπος βέλους diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm index 0a3b7bedcb..58ab520e51 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm and b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index 36df3c4b68..0f94d84b8d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -1543,7 +1543,6 @@ pattern definitions to be added to the standard patterns Tamaño de fuente - @@ -1551,6 +1550,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1651,8 +1651,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1974,9 +1974,9 @@ desde el Administrador de Complementos. Permitir que FreeCAD descargue y actualize automáticamente las librerías DXF - - + + Import options Opciones de importación @@ -2192,8 +2192,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Si se establece en '0' toda la spline se trata como un segmento recto. - + Export options Opciones de exportación @@ -2470,8 +2470,8 @@ These lines are thicker than normal grid lines. Este es el método que FreeCAD utilizará para convertir archivos DWG a DXF. Si se elige "Automático", FreeCAD tratará de encontrar uno de los siguientes conversores en el mismo orden en que se muestran aquí. Si FreeCAD no puede encontrar ninguno, puede que necesite elegir un convertidor específico e indicar su ruta aquí abajo. Elija la utilidad "dwg2dxf" si utiliza LibreDWG, "ODAFileConverter" si utiliza el convertidor de archivos ODA, o la utilidad "dwg2dwg" si utiliza la versión pro de QCAD. - + Automatic Automático @@ -2766,8 +2766,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3175,7 +3175,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rotar @@ -3198,7 +3198,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Desfase @@ -3389,59 +3389,59 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Establecer la escala utilizada por las herramientas de anotación de "draft" - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No hay documento activo. Abortando. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Imposible insertar un nuevo objeto en una parte escalada - + Symbol not implemented. Using a default symbol. Símbolo no implementado. Usando un símbolo por defecto. - + image is Null imagen nula - + filename does not exist on the system or in the resource file filename no existe en el sistema ni en el archivo de recursos - + unable to load texture imposible cargar la textura - + Does not have 'ViewObject.RootNode'. No tiene 'ViewObject.RootNode'. @@ -3549,65 +3549,65 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Seleccione el punto de destino - + Create Label Crear Etiqueta - - + + Pick endpoint of leader line Seleccionar punto final de la línea principal - - + + Pick text position Seleccionar posición del texto - - - + + + Pick first point Seleccionar primer punto - + Create Line Crear Línea - + Create Wire Crear Cable - + Polyline Polilínea - - - - - - - + + + + + + + Pick next point Seleccionar el siguiente punto - + Unable to create a Wire from selected objects No se puede crear una línea a partir de los objetos seleccionados - + Convert to Wire Convertir a Cable @@ -3632,54 +3632,54 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Elegir punto de ubicación - + Create Text Crear Texto - + Select an object to convert. Seleccione un objeto para convertir. - + Convert to Sketch Convertir a Croquis - + Convert to Draft Convertir a Boceto - + Convert Draft/Sketch Convertir Borrador/Croquis - + Select an object to move Seleccione un objeto para mover - + Pick start point Elegir punto de inicio - - + + Pick end point Elegir punto final - + Move Mover - - + + Some subelements could not be moved. Algunos subelementos no se pudieron mover. @@ -3690,75 +3690,75 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Elegir punto central - - - + + + - + Pick radius Elegir radio - - - + + + Start angle Ángulo Inicial - - + + Pick start angle Elegir ángulo de inicio - - - + + + Aperture angle Ángulo de apertura - + Pick aperture Elegir apertura - + Create Circle (Part) Crear círculo (Parte) - + Create Circle Crear Círculo - + Create Arc (Part) Crear Arco (Parte) - + Create Arc Crear Arco - + Pick aperture angle Seleccione ángulo de apertura - - + + Arc by 3 points Arco por 3 puntos - + Create Arc by 3 points Create Arc by 3 points @@ -3768,7 +3768,7 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Activa/desactiva cuadrícula - + Select an object to edit Seleccione un objeto a editar @@ -3783,17 +3783,17 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Editar nodo - + No edit point found for selected object No se encontró ningún punto de edición para el objeto seleccionado - + Too many objects selected, max number set to: Demasiados objetos seleccionados, número máximo establecido en: - + : this object is not editable : este objeto no es editable @@ -3823,13 +3823,13 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Guardar archivo de estilos - + Select an object to project Seleccione un objeto a proyectar - - + + Create Point Crear Punto @@ -3845,38 +3845,38 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí. - + Base angle Ángulo base - + The base angle you wish to start the rotation from Ángulo base desde el que desea iniciar la rotación - + Pick base angle Elija el ángulo base - + Rotation Rotación - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Cantidad de rotación que desea realizar. El ángulo final será el ángulo base más esta cantidad. - + Pick rotation angle Elija el ángulo de rotación @@ -3981,12 +3981,12 @@ The final angle will be the base angle plus this amount. Polígono - + Create Polygon (Part) Crear Polígono (Part) - + Create Polygon Crear Polígono @@ -3996,7 +3996,7 @@ The final angle will be the base angle plus this amount. Haga clic en cualquier lugar de una línea para dividirla. - + Split line Dividir línea @@ -4006,8 +4006,8 @@ The final angle will be the base angle plus this amount. Seleccionar objetos para recortar o extender - + Pick distance Seleccionar distancia @@ -4047,14 +4047,14 @@ The final angle will be the base angle plus this amount. Spline ha sido cerrado - + Last point has been removed El último punto ha sido eliminado - + Create B-spline Crear B-spline @@ -4216,14 +4216,14 @@ The final angle will be the base angle plus this amount. Elipse - - + + Create Ellipse Crear Elipse - - + + Pick opposite point Elija el punto opuesto @@ -4316,25 +4316,25 @@ The final angle will be the base angle plus this amount. Cota - - - - + + + + Create Dimension Crear Cota - + Create Dimension (radial) Crear Cota (radial) - + Edge too short! ¡Arista demasiado corta! - + Edges don't intersect! ¡Las aristas no interseccionan! @@ -4364,12 +4364,12 @@ The final angle will be the base angle plus this amount. Escoja el punto final del desplazamiento - + Turning one Rectangle into a Wire Convirtiendo un Rectángulo en Alambre - + Stretch Estirar @@ -4379,12 +4379,12 @@ The final angle will be the base angle plus this amount. Rectángulo - + Create Plane Crear Plano - + Create Rectangle Crear Rectángulo @@ -4399,13 +4399,13 @@ The final angle will be the base angle plus this amount. Escoja el punto inicial del eje de simetría especular - + Mirror Espejo - - + + Pick end point of mirror line Escoja el punto final del eje de simetría especular @@ -4415,17 +4415,17 @@ The final angle will be the base angle plus this amount. Matriz de trayectoria retorcida - + Select an object to clone Seleccione un objeto a clonar - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4435,13 +4435,13 @@ The final angle will be the base angle plus this amount. Cambiar pendiente - - + + Select an object to upgrade Seleccione objeto a actualizar - + Upgrade Actualización @@ -4466,7 +4466,7 @@ The final angle will be the base angle plus this amount. El desplazamiento de curvas Bezier no está soportado actualmente - + Create 2D view Crea una vista 2D @@ -4486,14 +4486,14 @@ The final angle will be the base angle plus this amount. Reparar - + Downgrade Degradar - - + + Task panel: Panel de tarea: @@ -4504,26 +4504,26 @@ The final angle will be the base angle plus this amount. Matriz polar - - + + At least one element must be selected. Se debe seleccionar al menos un elemento. - - + + Selection is not suitable for array. La selección no es adecuada para la matriz. - - - - + + + + Object: Objeto: @@ -4543,16 +4543,16 @@ The final angle will be the base angle plus this amount. El ángulo está por debajo de -360 grados. Se ajusta a este valor para continuar. - - + + Fuse: Fusión: - - + + Create Link array: Crear matriz de Enlaces: @@ -4567,8 +4567,8 @@ The final angle will be the base angle plus this amount. Ángulo polar: - + Center of rotation: Centro de rotación: @@ -4687,17 +4687,17 @@ The final angle will be the base angle plus this amount. Se cambió el tipo de propiedad 'Seguimiento' - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: el ángulo oblicuo debe estar en el rango de -80 a +80 grados - + ShapeString: string has no wires ShapeString: la cadena no tiene aristas - + ShapeString: face creation failed for one character ShapeString: la creación de caras falló para un carácter @@ -4824,38 +4824,35 @@ The final angle will be the base angle plus this amount. No se puede generar forma: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Entrada incorrecta: debe ser un número. - - - - + @@ -4865,18 +4862,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Entrada incorrecta: debe ser un vector. - + Wrong input: must be a list or tuple of strings, or a single string. Entrada incorrecta: debe ser una lista o tupla de cadenas, o una única cadena. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Entrada incorrecta: debe ser 'Original', 'Frenet' o 'Tangent'. @@ -4893,8 +4893,8 @@ The final angle will be the base angle plus this amount. Entrada: valor único expandido a vector. - + Wrong input: must be an integer number. Entrada incorrecta: debe ser un número entero. @@ -4908,7 +4908,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: debe ser una ubicación, un vector o una rotación. @@ -4973,12 +4973,12 @@ The final angle will be the base angle plus this amount. Entrada incorrecta: debe ser una lista de dos elementos. Por ejemplo, [objeto, 'Arista1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Entrada incorrecta: el objeto es de tipo incorrecto. @@ -5305,9 +5305,9 @@ The final angle will be the base angle plus this amount. añadida la propiedad de vista 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' opciones de 'DisplayMode' renombradas a 'World/Screen' @@ -5494,7 +5494,7 @@ por medio de la opción Herramientas ▸ Gestor de complementos Error: módulo json no encontrado. Incapaz de guardar el estilo - + Clone Clonar @@ -5505,21 +5505,21 @@ por medio de la opción Herramientas ▸ Gestor de complementos Pendiente - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La dirección del desplazamiento no está definida. Por favor, mueva primero el ratón a cualquier lado del objeto para indicar una dirección - - + + True Verdadero - - + + False Falso @@ -5822,12 +5822,12 @@ Si se seleccionan muchos objetos o muchos subelementos, solo se usará el primer Draft_Wire - + Polyline Polilínea - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Crea una línea multipunto (polilínea). CTRL para ajustar, MAYÚS para restringir. @@ -6101,12 +6101,12 @@ Sin embargo, un solo croquis con rastros desconectados se convertirá en varios Draft_Move - + Move Mover - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6133,12 +6133,12 @@ CTRL para ajustar, MAYÚS para restringir. Draft_Arc_3Points - + Arc by 3 points Arco por 3 puntos - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Crea un arco circular seleccionando 3 puntos. @@ -6148,12 +6148,12 @@ CTRL para ajustar, MAYÚS para restringir. Draft_ArcTools - + Arc tools Herramientas de arco - + Create various types of circular arcs. Crea varios tipos de arcos circulares. @@ -6201,32 +6201,6 @@ Pulsa E o ALT+Click izquierdo para mostrar el menú contextual en los nodos soportados y en los objetos soportados. - - Draft_AddPoint - - - Add point - Añadir punto - - - - Adds a point to an existing Wire or B-spline. - Añade un punto a un alambre o B-spline existente. - - - - Draft_DelPoint - - - Remove point - Eliminar punto - - - - Removes a point from an existing Wire or B-spline. - Elimina un punto de una alambre o B-spline existente. - - Draft_CircularArray @@ -7115,19 +7089,19 @@ establecer verdadero para fusión o falso para compuesto - + Create a face Crear una cara + + - - The area of this object El área de este objeto @@ -7171,8 +7145,8 @@ establecer verdadero para fusión o falso para compuesto El objeto base que será duplicado. - + The object along which the copies will be distributed. It must contain 'Edges'. El objeto a lo largo del cual se distribuirán las copias. Debe contener 'Aristas'. @@ -7187,9 +7161,9 @@ establecer verdadero para fusión o falso para compuesto Factor de rotación de la matriz retorcida. - - + + Show the individual array elements (only for Link arrays) Muestra los elementos individuales de la matriz (sólo para matrices vinculadas) @@ -7318,8 +7292,8 @@ Al usar un estilo guardado, algunas de las propiedades de la vista se convertir sólo serán editables cambiando el estilo a través de la herramienta 'editor de estilo de anotación'. - + The base object that will be duplicated El objeto base que será duplicado @@ -8119,14 +8093,14 @@ Dejar en blanco para el valor predeterminado del sistema. Utilice 'arch' para forzar notación de arco de Estados Unidos - + Arrow size Tamaño de flecha - + Arrow type Tipo de flecha diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index efa1d96950..62faf3939d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index a394e5e249..e3f6d4175e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -1545,7 +1545,6 @@ pattern definitions to be added to the standard patterns Tamaño de la fuente - @@ -1553,6 +1552,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1653,8 +1653,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1976,9 +1976,9 @@ desde el Administrador de Complementos. Permitir que FreeCAD descargue y actualize automáticamente las librerías DXF - - + + Import options Importar opciones @@ -2196,8 +2196,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Si se establece en '0' toda la curva se trata como un segmento recto. - + Export options Opciones de exportación @@ -2473,8 +2473,8 @@ These lines are thicker than normal grid lines. Este es el método que FreeCAD utilizará para convertir archivos DWG a DXF. Si se elige "Automático", FreeCAD tratará de encontrar uno de los siguientes conversores en el mismo orden en que se muestran aquí. Si FreeCAD no puede encontrar ninguno, puede que necesite elegir un convertidor específico e indicar su ruta aquí abajo. Elija la utilidad "dwg2dxf" si utiliza LibreDWG, "ODAFileConverter" si utiliza el convertidor de archivos ODA, o la utilidad "dwg2dwg" si utiliza la versión pro de QCAD. - + Automatic Automatico @@ -2769,8 +2769,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3178,7 +3178,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Girar @@ -3201,7 +3201,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Desplazamiento @@ -3392,59 +3392,59 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Establecer la escala utilizada por las herramientas de anotación de "draft" - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No hay documento activo. Abortando. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Imposible insertar un nuevo objeto en una parte escalada - + Symbol not implemented. Using a default symbol. Símbolo no implementado. Usando un símbolo por defecto. - + image is Null imagen nula - + filename does not exist on the system or in the resource file filename no existe en el sistema ni en el archivo de recursos - + unable to load texture imposible cargar la textura - + Does not have 'ViewObject.RootNode'. No tiene 'ViewObject.RootNode'. @@ -3552,65 +3552,65 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Seleccione el punto de destino - + Create Label Crear Etiqueta - - + + Pick endpoint of leader line Seleccionar punto final de la línea principal - - + + Pick text position Seleccionar posición del texto - - - + + + Pick first point Seleccionar primer punto - + Create Line Crear Línea - + Create Wire Crear Cable - + Polyline Polilínea - - - - - - - + + + + + + + Pick next point Seleccionar el siguiente punto - + Unable to create a Wire from selected objects No se puede crear una línea a partir de los objetos seleccionados - + Convert to Wire Convertir a Cable @@ -3635,54 +3635,54 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Elegir punto de ubicación - + Create Text Crear Texto - + Select an object to convert. Seleccione un objeto para convertir. - + Convert to Sketch Convertir a Croquis - + Convert to Draft Convertir a Boceto - + Convert Draft/Sketch Convertir Borrador/Croquis - + Select an object to move Seleccione un objeto para mover - + Pick start point Elegir punto de inicio - - + + Pick end point Elegir punto final - + Move Mover - - + + Some subelements could not be moved. Algunos subelementos no se pudieron mover. @@ -3693,75 +3693,75 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Elegir punto central - - - + + + - + Pick radius Elegir radio - - - + + + Start angle Ángulo Inicial - - + + Pick start angle Elegir ángulo de inicio - - - + + + Aperture angle Ángulo de apertura - + Pick aperture Elegir apertura - + Create Circle (Part) Crear círculo (Parte) - + Create Circle Crear Círculo - + Create Arc (Part) Crear Arco (Parte) - + Create Arc Crear Arco - + Pick aperture angle Seleccione ángulo de apertura - - + + Arc by 3 points Arco por 3 puntos - + Create Arc by 3 points Create Arc by 3 points @@ -3771,7 +3771,7 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Activa/desactiva cuadrícula - + Select an object to edit Seleccione un objeto a editar @@ -3786,17 +3786,17 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Editar nodo - + No edit point found for selected object No se encontró ningún punto de edición para el objeto seleccionado - + Too many objects selected, max number set to: Demasiados objetos seleccionados, número máximo establecido en: - + : this object is not editable : este objeto no es editable @@ -3826,13 +3826,13 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí.Guardar archivo de estilos - + Select an object to project Seleccione un objeto a proyectar - - + + Create Point Crear Punto @@ -3848,38 +3848,38 @@ Para permitir que FreeCAD descargue estas librerías, responda Sí. - + Base angle Ángulo base - + The base angle you wish to start the rotation from Ángulo base desde el que desea iniciar la rotación - + Pick base angle Elija el ángulo base - + Rotation Rotación - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Cantidad de rotación que desea realizar. El ángulo final será el ángulo base más esta cantidad. - + Pick rotation angle Elija el ángulo de rotación @@ -3984,12 +3984,12 @@ The final angle will be the base angle plus this amount. Polígono - + Create Polygon (Part) Crear Polígono (Part) - + Create Polygon Crear Polígono @@ -3999,7 +3999,7 @@ The final angle will be the base angle plus this amount. Haga clic en cualquier lugar de una línea para dividirla. - + Split line Dividir línea @@ -4009,8 +4009,8 @@ The final angle will be the base angle plus this amount. Seleccionar objetos para recortar o extender - + Pick distance Seleccionar distancia @@ -4050,14 +4050,14 @@ The final angle will be the base angle plus this amount. Spline ha sido cerrado - + Last point has been removed El último punto ha sido eliminado - + Create B-spline Crear B-spline @@ -4219,14 +4219,14 @@ The final angle will be the base angle plus this amount. Elipse - - + + Create Ellipse Crear Elipse - - + + Pick opposite point Elija el punto opuesto @@ -4319,25 +4319,25 @@ The final angle will be the base angle plus this amount. Cota - - - - + + + + Create Dimension Crear Cota - + Create Dimension (radial) Crear Cota (radial) - + Edge too short! ¡Arista demasiado corta! - + Edges don't intersect! ¡Las aristas no interseccionan! @@ -4367,12 +4367,12 @@ The final angle will be the base angle plus this amount. Escoja el punto final del desplazamiento - + Turning one Rectangle into a Wire Convirtiendo un Rectángulo en Alambre - + Stretch Estirar @@ -4382,12 +4382,12 @@ The final angle will be the base angle plus this amount. Rectángulo - + Create Plane Crear Plano - + Create Rectangle Crear Rectángulo @@ -4402,13 +4402,13 @@ The final angle will be the base angle plus this amount. Escoja el punto inicial del eje de simetría especular - + Mirror Espejo - - + + Pick end point of mirror line Escoja el punto final del eje de simetría especular @@ -4418,17 +4418,17 @@ The final angle will be the base angle plus this amount. Matriz de trayectoria retorcida - + Select an object to clone Seleccione un objeto a clonar - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4438,13 +4438,13 @@ The final angle will be the base angle plus this amount. Cambiar pendiente - - + + Select an object to upgrade Seleccione objeto a actualizar - + Upgrade Actualización @@ -4469,7 +4469,7 @@ The final angle will be the base angle plus this amount. El desplazamiento de curvas Bezier no está soportado actualmente - + Create 2D view Crea una vista 2D @@ -4489,14 +4489,14 @@ The final angle will be the base angle plus this amount. Reparar - + Downgrade Degradar - - + + Task panel: Panel de tarea: @@ -4507,26 +4507,26 @@ The final angle will be the base angle plus this amount. Matriz polar - - + + At least one element must be selected. Se debe seleccionar al menos un elemento. - - + + Selection is not suitable for array. La selección no es adecuada para la matriz. - - - - + + + + Object: Objeto: @@ -4546,16 +4546,16 @@ The final angle will be the base angle plus this amount. El ángulo está por debajo de -360 grados. Se ajusta a este valor para continuar. - - + + Fuse: Fusión: - - + + Create Link array: Crear matriz de Enlaces: @@ -4570,8 +4570,8 @@ The final angle will be the base angle plus this amount. Ángulo polar: - + Center of rotation: Centro de rotación: @@ -4690,17 +4690,17 @@ The final angle will be the base angle plus this amount. Se cambió el tipo de propiedad 'Seguimiento' - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: el ángulo oblicuo debe estar en el rango de -80 a +80 grados - + ShapeString: string has no wires ShapeString: la cadena no tiene aristas - + ShapeString: face creation failed for one character ShapeString: la creación de caras falló para un carácter @@ -4827,38 +4827,35 @@ The final angle will be the base angle plus this amount. No se puede generar forma: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Entrada incorrecta: debe ser un número. - - - - + @@ -4868,18 +4865,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Entrada incorrecta: debe ser un vector. - + Wrong input: must be a list or tuple of strings, or a single string. Entrada incorrecta: debe ser una lista o tupla de cadenas, o una única cadena. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Entrada incorrecta: debe ser 'Original', 'Frenet' o 'Tangent'. @@ -4896,8 +4896,8 @@ The final angle will be the base angle plus this amount. Entrada: valor único expandido a vector. - + Wrong input: must be an integer number. Entrada incorrecta: debe ser un número entero. @@ -4911,7 +4911,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: debe ser una ubicación, un vector o una rotación. @@ -4976,12 +4976,12 @@ The final angle will be the base angle plus this amount. Entrada incorrecta: debe ser una lista de dos elementos. Por ejemplo, [objeto, 'Arista1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Entrada incorrecta: el objeto es de tipo incorrecto. @@ -5308,9 +5308,9 @@ The final angle will be the base angle plus this amount. añadida la propiedad de vista 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' opciones de 'DisplayMode' renombradas a 'World/Screen' @@ -5497,7 +5497,7 @@ por medio de la opción Herramientas ▸ Gestor de complementos Error: módulo json no encontrado. Incapaz de guardar el estilo - + Clone Clonar @@ -5508,21 +5508,21 @@ por medio de la opción Herramientas ▸ Gestor de complementos Pendiente - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La dirección del desplazamiento no está definida. Por favor, mueva primero el ratón a cualquier lado del objeto para indicar una dirección - - + + True Verdadero - - + + False Falso @@ -5825,12 +5825,12 @@ Si se seleccionan muchos objetos o muchos subelementos, solo se usará el primer Draft_Wire - + Polyline Polilínea - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Crea una línea multipunto (polilínea). CTRL para ajustar, MAYÚS para restringir. @@ -6104,12 +6104,12 @@ Sin embargo, un solo croquis con rastros desconectados se convertirá en varios Draft_Move - + Move Mover - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6136,12 +6136,12 @@ CTRL para ajustar, MAYÚS para restringir. Draft_Arc_3Points - + Arc by 3 points Arco por 3 puntos - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Crea un arco circular seleccionando 3 puntos. @@ -6151,12 +6151,12 @@ CTRL para ajustar, MAYÚS para restringir. Draft_ArcTools - + Arc tools Herramientas de arco - + Create various types of circular arcs. Crea varios tipos de arcos circulares. @@ -6204,32 +6204,6 @@ Pulsa E o ALT+Click izquierdo para mostrar el menú contextual en los nodos soportados y en los objetos soportados. - - Draft_AddPoint - - - Add point - Añadir punto - - - - Adds a point to an existing Wire or B-spline. - Añade un punto a un alambre o B-spline existente. - - - - Draft_DelPoint - - - Remove point - Eliminar punto - - - - Removes a point from an existing Wire or B-spline. - Elimina un punto de una alambre o B-spline existente. - - Draft_CircularArray @@ -7118,19 +7092,19 @@ establecer verdadero para fusión o falso para compuesto - + Create a face Crear una cara + + - - The area of this object El área de este objeto @@ -7174,8 +7148,8 @@ establecer verdadero para fusión o falso para compuesto El objeto base que será duplicado. - + The object along which the copies will be distributed. It must contain 'Edges'. El objeto a lo largo del cual se distribuirán las copias. Debe contener 'Aristas'. @@ -7190,9 +7164,9 @@ establecer verdadero para fusión o falso para compuesto Factor de rotación de la matriz retorcida. - - + + Show the individual array elements (only for Link arrays) Muestra los elementos individuales de la matriz (sólo para matrices vinculadas) @@ -7321,8 +7295,8 @@ Al usar un estilo guardado, algunas de las propiedades de la vista se convertir sólo serán editables cambiando el estilo a través de la herramienta 'editor de estilo de anotación'. - + The base object that will be duplicated El objeto base que será duplicado @@ -8122,14 +8096,14 @@ Dejar en blanco para el valor predeterminado del sistema. Utilice 'arch' para forzar notación de arco de Estados Unidos - + Arrow size Tamaño de flecha - + Arrow type Tipo de flecha diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 77606c7037..28e83e8305 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index 74a6ec200c..acf731c5ea 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -1128,7 +1128,7 @@ value by using the [ and ] keys while drawing Font size - Letra-tamaina + Letra-tipoaren tamaina @@ -1539,7 +1539,6 @@ pattern definitions to be added to the standard patterns Letra-tamaina - @@ -1547,6 +1546,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1647,8 +1647,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.Lerro-zabalera lehenetsia - + px px @@ -1969,9 +1969,9 @@ Eskuz ere egin daiteke, "dxf_library" lan-mahaia instalatuta gehigarrien kudeatz Onartu FreeCADek automatikoki deskarga eta egunera ditzan DXF liburutegiak - - + + Import options Inportazio-aukerak @@ -2188,8 +2188,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Hemen '0' ezarri bada, spline osoa segmentu zuzen gisa tratatuko da. - + Export options Esportazio-aukerak @@ -2466,8 +2466,8 @@ These lines are thicker than normal grid lines. FreeCADek metodo hau erabiliko du DWG fitxategiak DXF formatura bihurtzeko. "Automatikoa" aukeratu bada, FreeCAD saiatuko da hurrengo bihurtzaileetako bat aurkitzen saiatuko da, hemen ageri diren ordena berean. FreeCADek ez badu horietako bat ere aurkitzen, bihurtzaile zehatz bat aukeratu beharko duzu eta zein bide-izenetan dagoen adierazi. Aukeratu "dwg2dxf" utilitatea LibreDWG erabiliko bada, "ODAFileConverter" utilitatea ODA fitxategi-bihurtzailea erabiliko bada edo "dwg2dwg" utilitatea QCADen bertsio profesionala erabiliko bada. - + Automatic Automatikoa @@ -2762,8 +2762,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3172,7 +3172,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba - + Rotate Biratu @@ -3195,7 +3195,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba - + Offset Desplazamendua @@ -3388,59 +3388,59 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Ezarri zirriborro-oharpenen tresnek erabilitako eskala - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Ez dago dokumentu aktiborik. Abortatzen. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Ezin izan da objektu berria txertatu eskalatutako piezan - + Symbol not implemented. Using a default symbol. Ikurra ez dago inplementatuta. Ikur lehenetsia erabiliko da. - + image is Null Irudia nulua da - + filename does not exist on the system or in the resource file Fitxategi-izena ez da existitzen sisteman edo baliabideen fitxategian - + unable to load texture Ezin da testura kargatu - + Does not have 'ViewObject.RootNode'. Ez dauka 'ViewObject.RootNode'. @@ -3548,65 +3548,65 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Aukeratu helburu-puntua - + Create Label Sortu etiketa - - + + Pick endpoint of leader line Aukeratu gida-marraren amaiera-puntua - - + + Pick text position Aukeratu testuaren posizioa - - - + + + Pick first point Aukeratu lehen puntua - + Create Line Sortu lerroa - + Create Wire Sortu alanbrea - + Polyline Polilerroa - - - - - - - + + + + + + + Pick next point Aukeratu hurrengo puntua - + Unable to create a Wire from selected objects Ezin izan da alanbre bat sortu hautatutako objektuak erabilita - + Convert to Wire Bihurtu alanbre @@ -3631,54 +3631,54 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Aukeratu kokapen-puntua - + Create Text Sortu testua - + Select an object to convert. Hautatu bihurtuko den objektua. - + Convert to Sketch Bihurtu krokis - + Convert to Draft Bihurtu zirriborro - + Convert Draft/Sketch Bihurtu zirriborro/krokis - + Select an object to move Hautatu mugituko den objektua - + Pick start point Aukeratu hasiera-puntua - - + + Pick end point Aukeratu amaiera-puntua - + Move Mugitu - - + + Some subelements could not be moved. Zenbait azpielementu ezin dira mugitu. @@ -3689,75 +3689,75 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Aukeratu puntu zentrala - - - + + + - + Pick radius Aukeratu erradioa - - - + + + Start angle Hasierako angelua - - + + Pick start angle Aukeratu hasierako angelua - - - + + + Aperture angle Irekidura-angelua - + Pick aperture Aukeratu irekidura - + Create Circle (Part) Sortu zirkulua (pieza) - + Create Circle Sortu zirkulua - + Create Arc (Part) Sortu arkua (pieza) - + Create Arc Sortu arkua - + Pick aperture angle Aukeratu irekidura-angelua - - + + Arc by 3 points Arkua 3 punturen arabera - + Create Arc by 3 points Create Arc by 3 points @@ -3767,7 +3767,7 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Txandakatu sareta - + Select an object to edit Hautatu editatuko den objektua @@ -3782,17 +3782,17 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Editatu nodoa - + No edit point found for selected object Ez da edizio-punturik aurkitu hautatutako objekturako - + Too many objects selected, max number set to: Objektu gehiegi dago hautatuta, kopuru maximoa honakoa izango da: - + : this object is not editable : objektu hau ezin da editatu @@ -3822,13 +3822,13 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Gorde estiloen fitxategia - + Select an object to project Hautatu proiektatuko den objektua - - + + Create Point Sortu puntua @@ -3844,31 +3844,31 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'. - + Base angle Oinarri-angelua - + The base angle you wish to start the rotation from Biraketa hasteko erabiliko den oinarri-angelua - + Pick base angle Aukeratu oinarri-angelua - + Rotation Biraketa - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Gauzatuko den biraketa kantitatea. @@ -3876,7 +3876,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. - + Pick rotation angle Aukeratu biraketa-angelua @@ -3981,12 +3981,12 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Poligonoa - + Create Polygon (Part) Sortu poligonoa (pieza) - + Create Polygon Sortu poligonoa @@ -3996,7 +3996,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Egin klik lerro bateko edozein tokitan hura zatitzeko. - + Split line Zatitu lerroa @@ -4006,8 +4006,8 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Hautatu muxarratuko/luzatuko diren objektuak - + Pick distance Aukeratu distantzia @@ -4047,14 +4047,14 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Spline-a itxi egin da - + Last point has been removed Azken puntua kendu da - + Create B-spline Sortu B-spline elementua @@ -4216,14 +4216,14 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Elipsea - - + + Create Ellipse Sortu elipsea - - + + Pick opposite point Aukeratu aurkako puntua @@ -4316,25 +4316,25 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Kota - - - - + + + + Create Dimension Sortu kota - + Create Dimension (radial) Sortu kota (erradiala) - + Edge too short! Ertz laburregia. - + Edges don't intersect! Ertzek ez dute elkar ebakitzen! @@ -4364,12 +4364,12 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Aukeratu desplazamenduaren amaiera-puntua - + Turning one Rectangle into a Wire Laukizuzen bat alanbre bihurtzen - + Stretch Luzatu @@ -4379,12 +4379,12 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Laukizuzena - + Create Plane Sortu planoa - + Create Rectangle Sortu laukizuzena @@ -4399,13 +4399,13 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Aukeratu ispilatze-lerroaren hasiera-puntua - + Mirror Ispilatu - - + + Pick end point of mirror line Aukeratu ispilatze-lerroaren amaiera-puntua @@ -4415,17 +4415,17 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Bide kiribilduen matrizea - + Select an object to clone Hautatu klonatuko den objektua - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4435,13 +4435,13 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Aldatu malda - - + + Select an object to upgrade Hautatu eguneratuko den objektua - + Upgrade Eguneratu @@ -4466,7 +4466,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Bezier kurben desplazamendua ezin da oraindik egin - + Create 2D view Sortu 2D bista @@ -4486,14 +4486,14 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Konpondu - + Downgrade Degradatu - - + + Task panel: Ataza-panela: @@ -4504,26 +4504,26 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Matrize polarra - - + + At least one element must be selected. Gutxienez elementu bat hautatu behar da. - - + + Selection is not suitable for array. Hautapena ez da egokia matrizerako. - - - - + + + + Object: Objektua: @@ -4543,16 +4543,16 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Angeluak -360 gradu baino gutxiago ditu. Balio hau ezarri da jarraitu ahal izateko. - - + + Fuse: Fusionatu: - - + + Create Link array: Sortu esteka-matrizea: @@ -4567,8 +4567,8 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Angelu polarra: - + Center of rotation: Biraketa-zentroa: @@ -4687,17 +4687,17 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. 'Tracking' propietate mota aldatu da - + ShapeString: oblique angle must be in the -80 to +80 degree range Testu-forma: zeharkako angeluak -80 eta +80 graduren arteko barrutian egon behar du - + ShapeString: string has no wires Testu-forma: testuak ez du alanbrerik - + ShapeString: face creation failed for one character Testu-forma: aurpegiaren sorrerak huts egin du karaktere batengatik @@ -4824,38 +4824,35 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Ezin da forma sortu: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Okerreko sarrera: zenbaki bat izan behar du. - - - - + @@ -4865,18 +4862,21 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. - + + + + Wrong input: must be a vector. Okerreko sarrera: bektore bat izan behar du. - + Wrong input: must be a list or tuple of strings, or a single string. Okerreko sarrera: kateen edo tuplen zerrenda bat edo kate bakarra izan behar du. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Okerreko sarrera: 'jatorrizkoa', 'frenet' edo 'tangentea' izan behar du. @@ -4893,8 +4893,8 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Sarrera: bektorera hedatutako balio bakarra. - + Wrong input: must be an integer number. Okerreko sarrera: osoko zenbakia izan behar du. @@ -4908,7 +4908,7 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. - + Wrong input: must be a placement, a vector, or a rotation. Okerreko sarrera: kokapen bat, bektore bat edo biraketa bat izan behar du. @@ -4973,12 +4973,12 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. Okerreko sarrera: bi elementuren zerrenda izan behar du. Adibidez [objektua, 'Ertza1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Okerreko sarrera: objektua mota okerrekoa da. @@ -5305,9 +5305,9 @@ Amaierako angelua oinarriko angelua gehi kantitate hau izango da. bistaren 'TextColor' propietatea gehitu da - - + + renamed 'DisplayMode' options to 'World/Screen' 'BistaratzeModua' aukeren izena aldatu da 'Mundua/Pantaila' izan dadin @@ -5494,7 +5494,7 @@ Instalatu DXF liburutegiaren gehigarria eskuz Errorea: Ez da aurkitu JSON modulua. Ezin izan da estiloa gorde. - + Clone Klonatu @@ -5505,21 +5505,21 @@ Instalatu DXF liburutegiaren gehigarria eskuz Malda - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Desplazamenduaren norabidea ez dago definituta. Eraman sagua objektuaren aldeetako batera, norabide bat adierazteko - - + + True Egia - - + + False Gezurra @@ -5829,12 +5829,12 @@ erabiliko da etiketan informazioa emateko. Draft_Wire - + Polyline Polilerroa - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Puntu anitzeko lerro (polilerro) bat sortzen du. Ctrl atxikitzeko, Shift murrizteko. @@ -6108,12 +6108,12 @@ Hala ere, konektatu gabeko trazak dituen krokis bakun bat banakako zirroborro-ob Draft_Move - + Move Mugitu - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6140,12 +6140,12 @@ Ctrl atxikitzeko, Shift murrizteko. Draft_Arc_3Points - + Arc by 3 points Arkua 3 punturen arabera - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Arku zirkular bat sortzen du hiru puntu erabilita. @@ -6155,12 +6155,12 @@ Ctrl atxikitzeko, Shift murrizteko. Draft_ArcTools - + Arc tools Arku-tresnak - + Create various types of circular arcs. Arku zirkularren hainbat mota sortzen ditu. @@ -6208,32 +6208,6 @@ Sakatu E edo Alt+eskuineko klik laster-menua bistaratzeko onartutako nodoetan eta onartutako objektuetan. - - Draft_AddPoint - - - Add point - Gehitu puntua - - - - Adds a point to an existing Wire or B-spline. - Puntu bat gehitzen dio lehendik dagoen alanbre edo B-spline bati. - - - - Draft_DelPoint - - - Remove point - Kendu puntua - - - - Removes a point from an existing Wire or B-spline. - Puntu bat kentzen du lehendik dagoen alanbre edo B-spline batetik. - - Draft_CircularArray @@ -7126,19 +7100,19 @@ ezarri 'Egia' fusiorako edo 'Faltsua' konposaturako - + Create a face Sortu aurpegi bat + + - - The area of this object Objektuaren area @@ -7182,8 +7156,8 @@ ezarri 'Egia' fusiorako edo 'Faltsua' konposaturako Bikoiztuko den oinarri-objektua. - + The object along which the copies will be distributed. It must contain 'Edges'. Kopiak banatzeko erabiliko den objektua. 'Ertzak' eduki behar ditu. @@ -7198,9 +7172,9 @@ ezarri 'Egia' fusiorako edo 'Faltsua' konposaturako Matrize kiribilduaren biraketa-faktorea. - - + + Show the individual array elements (only for Link arrays) Erakutsi banakako matrize-elementuak (esteka-matrizeetarako soilik) @@ -7329,8 +7303,8 @@ Gordetako estilo bat erabiltzen denean, bista-propietate batzuk irakurtzeko soil 'Oharpen-estiloen editorea' erabilita estiloa aldatzen bada soilik editatuko dira. - + The base object that will be duplicated Bikoiztuko den oinarri-objektua @@ -8132,14 +8106,14 @@ Utzi hutsik sistemaren unitate lehenetsia erabiltzeko. Erabili 'arch' US arku-notazioa behartzeko. - + Arrow size Gezi-tamaina - + Arrow type Gezi mota diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index e34908a5a6..3e8eb5f2a8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index cd8d1a950f..4c50bf97db 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -1547,7 +1547,6 @@ pattern definitions to be added to the standard patterns Fonttikoko - @@ -1555,6 +1554,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1655,8 +1655,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1978,9 +1978,9 @@ from the Addon Manager. Salli FreeCAD:in automaattisesti ladata ja päivittää DXF-kirjastot - - + + Import options Tuontiasetukset @@ -2198,8 +2198,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Vientiasetukset @@ -2476,8 +2476,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automaattinen @@ -2772,8 +2772,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3182,7 +3182,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Pyöritä @@ -3205,7 +3205,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Siirtymä @@ -3398,59 +3398,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3558,65 +3558,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3641,54 +3641,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Valitse aloituspiste - - + + Pick end point Valitse lopetuspiste - + Move Siirrä - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3699,75 +3699,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3777,7 +3777,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3792,17 +3792,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3832,13 +3832,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3854,31 +3854,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Kierto - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3886,7 +3886,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3991,12 +3991,12 @@ The final angle will be the base angle plus this amount. Polygoni - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4006,7 +4006,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4016,8 +4016,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4057,14 +4057,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Luo B-splini @@ -4226,14 +4226,14 @@ The final angle will be the base angle plus this amount. Ellipsi - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4326,25 +4326,25 @@ The final angle will be the base angle plus this amount. Mitta - - - - + + + + Create Dimension Luo Mitta - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4374,12 +4374,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4389,12 +4389,12 @@ The final angle will be the base angle plus this amount. Suorakulmio - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4409,13 +4409,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4425,17 +4425,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4445,13 +4445,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4476,7 +4476,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4496,14 +4496,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4514,26 +4514,26 @@ The final angle will be the base angle plus this amount. Polar array - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4553,16 +4553,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4577,8 +4577,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4697,17 +4697,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4834,38 +4834,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4875,18 +4872,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4903,8 +4903,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4918,7 +4918,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4983,12 +4983,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,9 +5315,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5504,7 +5504,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Kloonaa @@ -5515,21 +5515,21 @@ from menu Tools -> Addon Manager Kaltevuus - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Tosi - - + + False Epätosi @@ -5839,12 +5839,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6118,12 +6118,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Siirrä - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6150,12 +6150,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6165,12 +6165,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6218,32 +6218,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Lisää piste - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Poista piste - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7135,19 +7109,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7191,8 +7165,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7207,9 +7181,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7338,8 +7312,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8142,14 +8116,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Nuolen koko - + Arrow type Nuolen tyyppi diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 32a8f3737f..d1a25fa09e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index c209fb3c05..79f4a1e0a6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -214,7 +214,7 @@ If it is checked it will show the unit next to the dimension value - Si cette case est cochée, l'unité sera indiquée à côté de la valeur de la dimension. + Si cette option est cochée, l'unité sera indiquée à côté de la valeur de la dimension. @@ -258,7 +258,7 @@ If it is checked it will display the dimension line - Si cette case est cochée, la ligne des dimensions sera affichée. + Si cette option est cochée, la ligne des dimensions sera affichée. @@ -303,7 +303,7 @@ Dimension details - Détails de la dimension + Détails des dimensions @@ -423,7 +423,7 @@ Changer la direction de l’axe lui-même dans l’éditeur de propriété. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Si cette case est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. + Si cette option est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. Ceci ne fonctionne que si "Réseau lié" est désactivé. @@ -555,7 +555,7 @@ Les valeurs négatives se traduiront par des copies produites dans la direction If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Si cette case est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. + Si cette option est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. Ceci ne fonctionne que si "Réseau lié" est désactivé. @@ -567,7 +567,7 @@ Ceci ne fonctionne que si "Réseau lié" est désactivé. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Si cette case est cochée, l'objet résultant sera un "Réseau lié" au lieu d'un réseau normal. + Si cette option est cochée, l'objet résultant sera un "Réseau lié" au lieu d'un réseau normal. Un réseau lié est plus efficace lors de la création de plusieurs copies mais il ne peut pas être fusionné. @@ -652,7 +652,7 @@ Changer la direction de l’axe lui-même dans l’éditeur de propriété. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Si cette case est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. + Si cette option est cochée, les objets résultants dans le réseau seront fusionnés s’ils se touchent. Ceci ne fonctionne que si "Réseau lié" est désactivé. @@ -664,7 +664,7 @@ Ceci ne fonctionne que si "Réseau lié" est désactivé. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Si la case est cochée, l'objet résultant sera un "Réseau lié" au lieu d'un réseau normal. + Si cette case est cochée, l'objet résultant sera un "Réseau lié" au lieu d'un réseau normal. Un réseau lié est plus efficace lors de la création de plusieurs copies mais il ne peut pas être fusionné. @@ -1099,7 +1099,7 @@ Vous pouvez également modifier cette valeur en utilisant les touches [ et ] pen If checked, a unit symbol is added to dimension texts - Si cette case est cochée, un symbole d'unité est ajouté aux textes des dimensions. + Si cette option est cochée, un symbole d'unité sera ajouté aux textes des dimensions. @@ -1308,8 +1308,8 @@ planes sont choisis pendant les commandes. If checked, a widget indicating the current working plane orientation appears when picking points - Si cette case est cochée, un widget indiquant l'orientation -du plan de travail apparaît lors de la sélection des points. + Si cette option est cochée, un widget indiquant l'orientation +du plan de travail apparaîtra lors de la sélection des points. @@ -1320,7 +1320,7 @@ du plan de travail apparaît lors de la sélection des points. If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. - Si cette option est cochée, la liste déroulante des calques comprend également les groupes. + Si cette option est cochée, la liste déroulante des calques comprendra aussi les groupes. Les objets peuvent alors être automatiquement ajoutés aux groupes. @@ -1336,8 +1336,8 @@ Les objets peuvent alors être automatiquement ajoutés aux groupes. If checked, instructions are displayed in the Report view when using Draft commands - Si cette option est cochée, les instructions sont affichées dans la vue rapport -lors de l'utilisation des commandes de Draft. + Si cette option est cochée, les instructions seront affichées dans +la vue rapport lors de l'utilisation des commandes de Draft. @@ -1355,7 +1355,7 @@ Cela permet d'indiquer une direction et de saisir ensuite une distance. If checked, base objects, instead of created copies, are selected after copying Si cette option est cochée, les objets de base, au lieu des copies créées, -sont sélectionnés après la copie. +seront sélectionnés après la copie. @@ -1472,7 +1472,7 @@ Uniquement pour les options splitFaces et makeShell. Visual - Visuel + Paramètres graphiques @@ -1492,7 +1492,7 @@ Uniquement pour les options splitFaces et makeShell. Additional SVG pattern location - Emplacement des motifs SVG supplémentaires + Chemin de motifs SVG supplémentaires @@ -1544,7 +1544,6 @@ contenant des définitions de motifs à ajouter aux motifs standard.Taille de la police - @@ -1552,6 +1551,7 @@ contenant des définitions de motifs à ajouter aux motifs standard. + mm mm @@ -1635,7 +1635,7 @@ widget d'échelle d'annotation du projet. Si l'échelle est 1:100, le multiplica If checked, the dimension line is displayed by default - Si cette option est cochée, les lignes des dimensions sont affichées par défaut. + Si cette option est cochée, les lignes des dimensions seront affichées par défaut. @@ -1653,8 +1653,8 @@ widget d'échelle d'annotation du projet. Si l'échelle est 1:100, le multiplica La largeur des lignes par défaut. - + px px @@ -1721,7 +1721,7 @@ widget d'échelle d'annotation du projet. Si l'échelle est 1:100, le multiplica If checked, a unit symbol is added to dimension texts by default - Si cette option est cochée, un symbole des unités est ajouté par défaut aux textes des dimensions. + Si cette option est cochée, un symbole des unités sera ajouté par défaut aux textes des dimensions. @@ -1738,7 +1738,7 @@ widget d'échelle d'annotation du projet. Si l'échelle est 1:100, le multiplica The default unit override for dimensions. Enter a unit such as m or cm, leave blank to use the current unit defined in FreeCAD. L'unité de remplacement par défaut pour les dimensions. Entrez une unité telle -que m ou cm, laissez vide pour utiliser l'unité en cours définie dans FreeCAD. +que m ou cm ou laissez vide pour utiliser l'unité définie dans FreeCAD. @@ -1754,7 +1754,7 @@ et en pouces dans les dimensions. Dimension details - Détails de la dimension + Détails des dimensions @@ -1977,9 +1977,9 @@ Vous pouvez également le faire manuellement en installant l'atelier "dxf_librar Permettre à FreeCAD de télécharger et mettre à jour automatiquement les librairies DXF - - + + Import options Options d'importation @@ -1996,7 +1996,7 @@ Vous pouvez également le faire manuellement en installant l'atelier "dxf_librar If unchecked, texts and mtexts won't be imported - Si cette case n'est pas cochée, les textes/méta-textes ne seront pas importés. + Si cette option n'est pas cochée, les textes/méta-textes ne seront pas importés. @@ -2006,7 +2006,7 @@ Vous pouvez également le faire manuellement en installant l'atelier "dxf_librar If unchecked, points won't be imported - Si cette case n'est pas cochée, les points ne seront pas importés. + Si cette option n'est pas cochée, les points ne seront pas importés. @@ -2016,7 +2016,7 @@ Vous pouvez également le faire manuellement en installant l'atelier "dxf_librar If checked, paper space objects will be imported too - Si cette case est cochée, les objets de l'espace papier seront également importés. + Si cette option est cochée, les objets paper space seront également importés. @@ -2195,8 +2195,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Si c'est défini à "0", la spline entière est traitée comme un segment droit. - + Export options Options d'exportation @@ -2287,7 +2287,7 @@ Ceci peut échouer avec les modèles ultérieurs à DXF R12. If checked, the grid will always be visible in new views. Use Draft ToggleGrid to change this for the active view. - Si cette case est cochée, la grille sera toujours visible dans les nouvelles vues. + Si cette option est cochée, la grille sera toujours visible dans les nouvelles vues. Utiliser Activer/désactiver la grille de Draft pour modifier ce paramètre pour la vue active. @@ -2319,7 +2319,7 @@ Utiliser Activer/désactiver la grille de Draft pour modifier ce paramètre pour If checked, the grid will be visible during commands in new views. Use Draft ToggleGrid to change this for the active view. - Si cette case est cochée, la grille sera visible pendant les commandes dans les nouvelles vues. + Si cette option est cochée, la grille sera visible pendant les commandes dans les nouvelles vues. Utiliser Activer/désactiver la grille de Draft pour modifier ce paramètre pour la vue active. @@ -2331,7 +2331,7 @@ Utiliser Activer/désactiver la grille de Draft pour modifier ce paramètre pour If checked, an additional border is displayed around the grid, showing the main square size in the bottom left corner - Si cette option est cochée, une bordure supplémentaire est affichée autour de la grille, + Si cette option est cochée, une bordure supplémentaire sera affichée autour de la grille, indiquant la taille du carré principal dans le coin inférieur gauche. @@ -2440,7 +2440,7 @@ Ces lignes sont plus épaisses que les lignes normales de la grille. If checked, snapping is activated without the need to press the Snap modifier key - Si cette option est cochée, l'aimantation est activée sans qu'il + Si cette option est cochée, l'aimantation sera activée sans qu'il soit nécessaire d'appuyer sur la touche pour l'aimantation. @@ -2474,8 +2474,8 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. C'est la méthode que FreeCAD utilisera pour convertir des fichiers DWG en DXF. Si "Automatique" est choisi, FreeCAD essaiera de trouver un des convertisseurs suivants dans le même ordre que celui qui est affiché ici. Si FreeCAD ne parvient pas à en trouver, vous devrez peut-être choisir un convertisseur spécifique et indiquer son chemin ci-dessous. Choisissez l'utilitaire "dwg2dxf" si vous utilisez LibreDWG, "ODAFileConverter" si vous utilisez le convertisseur de fichier ODA, ou l'utilitaire "dwg2dwg" si vous utilisez la version pro de QCAD. - + Automatic Automatique @@ -2617,7 +2617,7 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. If checked, the Snap widget is displayed in the Draft statusbar - Si cette option est cochée, le widget d'aimantation est affiché dans la barre d'état de Draft. + Si cette option est cochée, le widget d'aimantation sera affiché dans la barre d'état de Draft. @@ -2627,7 +2627,7 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. If checked, the Annotation scale widget is displayed in the Draft statusbar - Si cette option est cochée, le widget d'échelle d'annotation est affiché dans la barre d'état de Draft. + Si cette option est cochée, le widget d'échelle d'annotation sera affiché dans la barre d'état de Draft. @@ -2770,8 +2770,8 @@ soit nécessaire d'appuyer sur la touche pour l'aimantation. - - + + @@ -3058,13 +3058,13 @@ Non disponible si l'option de préférence de Draft "Utiliser les primitives de If checked, command will not finish until you press the command button again - Si cette case est cochée, la commande ne se terminera pas avant -que vous appuyez à nouveau sur le bouton de commande. + Si cette option est cochée, la commande ne se terminera pas tant que +vous n'aurez pas appuyé à nouveau sur le bouton de commande. If checked, an OCC-style offset will be performed instead of the classic offset - Si cette case est cochée, un décalage de type OCC sera effectué au lieu du décalage classique. + Si cette option est cochée, un décalage de type OCC sera effectué au lieu du décalage classique. @@ -3079,7 +3079,7 @@ que vous appuyez à nouveau sur le bouton de commande. If checked, objects will be copied instead of moved - Si cette case est cochée, les objets seront copiés au lieu d'être déplacés. + Si cette option est cochée, les objets seront copiés au lieu d'être déplacés. @@ -3129,7 +3129,7 @@ que vous appuyez à nouveau sur le bouton de commande. If checked, subelements will be modified instead of entire objects - Si cette case est cochée, les sous-éléments seront modifiés plutôt que les objets en entier. + Si cette option est cochée, les sous-éléments seront modifiés plutôt que les objets en entier. @@ -3181,7 +3181,7 @@ que vous appuyez à nouveau sur le bouton de commande. - + Rotate Pivoter @@ -3204,9 +3204,9 @@ que vous appuyez à nouveau sur le bouton de commande. - + Offset - Décaler + Décalage @@ -3393,59 +3393,59 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Définir l'échelle utilisée par les outils d'annotation de Draft - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Aucun document actif. Interruption. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Mauvaise entrée : l'objet {} n'est pas dans le document. - + Unable to insert new object into a scaled part Impossible d'insérer un nouvel objet dans une pièce redimensionnée - + Symbol not implemented. Using a default symbol. Symbole non implémenté. Utilisation d'un symbole par défaut. - + image is Null l'image est Nulle - + filename does not exist on the system or in the resource file le nom du fichier n'existe ni dans le système ni dans le fichier de ressource - + unable to load texture impossible de charger la texture - + Does not have 'ViewObject.RootNode'. N'a pas de "ViewObject.RootNode". @@ -3518,7 +3518,7 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui". Wrong input: unknown document {} - Wrong input: unknown document {} + Mauvaise entrée : document inconnu {} @@ -3553,65 +3553,65 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Choisir le Point cible - + Create Label Créer une étiquette - - + + Pick endpoint of leader line Choisir l'extrémité de la ligne de référence - - + + Pick text position Sélectionner la position du texte - - - + + + Pick first point Sélectionner le premier point - + Create Line Créer une ligne - + Create Wire Créer une polyligne - + Polyline Polyligne - - - - - - - + + + + + + + Pick next point Sélectionner le point suivant - + Unable to create a Wire from selected objects Impossible de créer une polyligne à partir des objets sélectionnés - + Convert to Wire Convertir en polyligne @@ -3636,54 +3636,54 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Sélectionner le point de l’emplacement - + Create Text Créer un texte - + Select an object to convert. Sélectionner un objet à convertir. - + Convert to Sketch Convertir en Esquisse - + Convert to Draft Convertir en Draft - + Convert Draft/Sketch Convertir Draft/Esquisse - + Select an object to move Sélectionner un objet à déplacer - + Pick start point Sélectionner le point de départ - - + + Pick end point Sélectionner l'extrémité - + Move Déplacer - - + + Some subelements could not be moved. Certains sous-éléments n’ont pas pu être déplacés. @@ -3694,77 +3694,77 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Sélectionner le point central - - - + + + - + Pick radius Rayon de sélection - - - + + + Start angle Angle de départ - - + + Pick start angle Sélectionner l’angle de départ - - - + + + Aperture angle Angle d'ouverture - + Pick aperture Sélectionner l’ouverture - + Create Circle (Part) Créer un cercle (partie) - + Create Circle Créer un cercle - + Create Arc (Part) Créer un arc (partie) - + Create Arc Créer un arc - + Pick aperture angle Sélectionner l’angle d’ouverture - - + + Arc by 3 points Arc par 3 points - + Create Arc by 3 points - Create Arc by 3 points + Créer un arc par 3 points @@ -3772,7 +3772,7 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Activer/désactiver la grille - + Select an object to edit Sélectionner un objet à modifier @@ -3787,17 +3787,17 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Modifier le nœud - + No edit point found for selected object Aucun point d'édition trouvé pour l'objet sélectionné - + Too many objects selected, max number set to: Trop d'objets sélectionnés, nombre maximum défini à : - + : this object is not editable : cet objet n'est pas modifiable @@ -3827,13 +3827,13 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui".Enregistrer le fichier des styles - + Select an object to project Sélectionner un objet à projeter - - + + Create Point Créer un point @@ -3849,31 +3849,31 @@ Pour permettre à FreeCAD de télécharger ces bibliothèques, choisir "Oui". - + Base angle Angle de base - + The base angle you wish to start the rotation from L'axe de départ de la rotation souhaitée - + Pick base angle Choisir l'angle de base - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. La valeur de la rotation que vous souhaitez effectuer. @@ -3881,7 +3881,7 @@ L'angle final sera l'angle de base plus cette quantité. - + Pick rotation angle Choisir l'angle de rotation @@ -3986,12 +3986,12 @@ L'angle final sera l'angle de base plus cette quantité. Polygone - + Create Polygon (Part) Créer un polygone (Part) - + Create Polygon Créer un polygone @@ -4001,7 +4001,7 @@ L'angle final sera l'angle de base plus cette quantité. Cliquer n'importe où sur une ligne pour la scinder. - + Split line Scinder la ligne @@ -4011,8 +4011,8 @@ L'angle final sera l'angle de base plus cette quantité. Sélectionner l'objet à réduire ou agrandir - + Pick distance Choisir la distance @@ -4052,14 +4052,14 @@ L'angle final sera l'angle de base plus cette quantité. La spline a été fermée - + Last point has been removed Le dernier point a été supprimé - + Create B-spline Créer une B-spline @@ -4221,14 +4221,14 @@ L'angle final sera l'angle de base plus cette quantité. Ellipse - - + + Create Ellipse Créer une ellipse - - + + Pick opposite point Sélectionner le point opposé @@ -4321,25 +4321,25 @@ L'angle final sera l'angle de base plus cette quantité. Dimension - - - - + + + + Create Dimension Créer une dimension - + Create Dimension (radial) Créer une dimension (radiale) - + Edge too short! Arête trop courte ! - + Edges don't intersect! Les arêtes ne se croisent pas ! @@ -4369,12 +4369,12 @@ L'angle final sera l'angle de base plus cette quantité. Choisir le point d’arrivée du déplacement - + Turning one Rectangle into a Wire Transformer un rectangle en un polyligne - + Stretch Étirer @@ -4384,12 +4384,12 @@ L'angle final sera l'angle de base plus cette quantité. Rectangle - + Create Plane Créer un plan - + Create Rectangle Créer un rectangle @@ -4404,13 +4404,13 @@ L'angle final sera l'angle de base plus cette quantité. Choisir le point de départ de la ligne de symétrie - + Mirror Symétrie - - + + Pick end point of mirror line Sélectionner le dernier point de la ligne de symétrie @@ -4420,19 +4420,19 @@ L'angle final sera l'angle de base plus cette quantité. Réseau torsadé selon une courbe - + Select an object to clone Sélectionner un objet à cloner - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Impossible de cloner un ou plusieurs objets sans forme, interruption - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + @@ -4440,13 +4440,13 @@ L'angle final sera l'angle de base plus cette quantité. Changer la pente - - + + Select an object to upgrade Sélectionner un objet à agréger - + Upgrade Agréger @@ -4471,7 +4471,7 @@ L'angle final sera l'angle de base plus cette quantité. Le décalage des courbes de Bézier n'est pour l'instant pas pris en charge - + Create 2D view Créer une vue 2D @@ -4491,14 +4491,14 @@ L'angle final sera l'angle de base plus cette quantité. Réparer - + Downgrade Désagréger - - + + Task panel: Panneau des tâches : @@ -4509,26 +4509,26 @@ L'angle final sera l'angle de base plus cette quantité. Réseau polaire - - + + At least one element must be selected. Au moins un élément doit être sélectionné. - - + + Selection is not suitable for array. La sélection n'est pas adaptée pour un réseau. - - - - + + + + Object: Objet : @@ -4548,16 +4548,16 @@ L'angle final sera l'angle de base plus cette quantité. L'angle est inférieur à -360 degrés. Il est défini à cette valeur pour continuer. - - + + Fuse: Union : - - + + Create Link array: Créer un réseau lié : @@ -4572,8 +4572,8 @@ L'angle final sera l'angle de base plus cette quantité. Angle polaire : - + Center of rotation: Centre de rotation : @@ -4692,17 +4692,17 @@ L'angle final sera l'angle de base plus cette quantité. a changé le type de la propriété "Tracking" - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString : l'angle oblique doit être entre -80 et +80 degrés - + ShapeString: string has no wires Forme à partir d'un texte : la chaîne de caractères n'a pas de polylignes - + ShapeString: face creation failed for one character Forme à partir d'un texte : la création de face a échoué pour un caractère @@ -4784,12 +4784,12 @@ L'angle final sera l'angle de base plus cette quantité. Two objects are needed. - Two objects are needed. + Deux objets sont nécessaires. One object is not valid. - One object is not valid. + Un objet n'est pas valide. @@ -4829,38 +4829,35 @@ L'angle final sera l'angle de base plus cette quantité. Impossible de générer la forme : - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Mauvaise entrée : l'objet de base n'est pas dans le document. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Entrée incorrecte : l'objet chemin n'est pas dans le document. - - - - - - + + + + + + Wrong input: must be a number. Mauvaise entrée : doit être un nombre. - - - - + @@ -4870,18 +4867,21 @@ L'angle final sera l'angle de base plus cette quantité. - + + + + Wrong input: must be a vector. Mauvaise entrée : doit être un vecteur. - + Wrong input: must be a list or tuple of strings, or a single string. Mauvaise entrée : doit être une liste ou un uplet de chaînes de caractères, ou une seule chaîne de caractère. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Mauvaise entrée : doit être "Original", "Frenet" ou "Tangent". @@ -4898,8 +4898,8 @@ L'angle final sera l'angle de base plus cette quantité. Entrée : valeur unique développée en vecteur. - + Wrong input: must be an integer number. Mauvaise entrée : doit être un nombre entier. @@ -4913,7 +4913,7 @@ L'angle final sera l'angle de base plus cette quantité. - + Wrong input: must be a placement, a vector, or a rotation. Mauvaise entrée : doit être un placement, un vecteur ou une rotation. @@ -4921,22 +4921,22 @@ L'angle final sera l'angle de base plus cette quantité. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Mauvaise entrée : l'objet cible ne doit pas être une liste. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Mauvaise entrée : l'objet cible n'est pas dans le document. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Mauvaise entrée : les sous-éléments doivent être une liste ou un tuple de chaînes ou une seule chaîne. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Mauvaise entrée : sous-élément {} n'est pas dans l'objet. @@ -4965,7 +4965,7 @@ L'angle final sera l'angle de base plus cette quantité. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Mauvaise entrée : les points {} doivent être une liste d'au moins deux vecteurs. @@ -4978,12 +4978,12 @@ L'angle final sera l'angle de base plus cette quantité. Mauvaise entrée : il faut une liste de deux éléments. Par exemple, [objet, "Edge1"]. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Mauvaise entrée : l'objet point n'est pas dans le document. - + Wrong input: object has the wrong type. Mauvaise entrée : l'objet a le mauvais type. @@ -5000,13 +5000,13 @@ L'angle final sera l'angle de base plus cette quantité. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Mauvaise entrée : l'objet arête ne doit pas être une liste ou un tuple. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Mauvaise entrée : l'objet arête n'est pas dans le document. @@ -5310,9 +5310,9 @@ L'angle final sera l'angle de base plus cette quantité. ajout de la propriété de vue "TextColor" - - + + renamed 'DisplayMode' options to 'World/Screen' les options "DisplayMode" ont été renommées en "World/Screen" @@ -5498,7 +5498,7 @@ Installer l’extension de la bibliothèque DXF manuellement depuis le menu Outi Erreur : module json introuvable. Impossible d'enregistrer le style - + Clone Cloner @@ -5509,21 +5509,21 @@ Installer l’extension de la bibliothèque DXF manuellement depuis le menu Outi Pente - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La direction du décalage n'est pas définie. Déplacer d'abord la souris de chaque côté de l'objet pour indiquer une direction - - + + True Vrai - - + + False Faux @@ -5585,7 +5585,7 @@ Installer l’extension de la bibliothèque DXF manuellement depuis le menu Outi _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry : fermé avec le même premier/dernier Point. La géométrie n'est pas mise à jour. + _BSpline.createGeometry : fermé avec le même premier/dernier point. La géométrie n'est pas mise à jour. @@ -5616,7 +5616,7 @@ Installer l’extension de la bibliothèque DXF manuellement depuis le menu Outi Draw style - Style de représentation + Style de trait @@ -5646,7 +5646,7 @@ Installer l’extension de la bibliothèque DXF manuellement depuis le menu Outi Custom - Personnalisée + Personnalisé @@ -5830,12 +5830,12 @@ Si plusieurs objets ou plusieurs sous-éléments sont sélectionnés, seul le pr Draft_Wire - + Polyline Polyligne - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Créer une ligne brisée (polyligne). Ctrl pour aimanter, Maj pour contraindre. @@ -6109,12 +6109,12 @@ Cependant, une seule esquisse avec des traces déconnectées sera convertie en p Draft_Move - + Move Déplacer - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6141,12 +6141,12 @@ Ctrl pour aimanter, Maj pour contraindre. Draft_Arc_3Points - + Arc by 3 points Arc par 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Créer un arc circulaire en prenant 3 points. @@ -6156,12 +6156,12 @@ Ctrl pour aimanter, Maj pour contraindre. Draft_ArcTools - + Arc tools Outils pour les arcs - + Create various types of circular arcs. Créer différents types d'arcs circulaires. @@ -6209,32 +6209,6 @@ Appuyer sur E ou Alt+clic gauche pour afficher le menu contextuel sur les nœuds et les objets pris en charge. - - Draft_AddPoint - - - Add point - Ajouter un point - - - - Adds a point to an existing Wire or B-spline. - Ajoute un point à une polyligne ou à une B-spline existante. - - - - Draft_DelPoint - - - Remove point - Supprimer le point - - - - Removes a point from an existing Wire or B-spline. - Supprime un point d’une polyligne ou d’une B-spline existante. - - Draft_CircularArray @@ -6626,7 +6600,7 @@ Le réseau peut être transformé en réseau polaire ou circulaire en changeant Scale - Échelle + Mettre à l'échelle @@ -6916,7 +6890,7 @@ convertir les bords fermés en faces remplies et en polygones paramétriques, et Offset - Décalage + Décaler @@ -7131,19 +7105,19 @@ régler à Vrai pour la fusion ou Faux pour un composé - + Create a face Créer une face + + - - The area of this object La surface de cet objet @@ -7187,8 +7161,8 @@ régler à Vrai pour la fusion ou Faux pour un composé L'objet de base qui sera dupliqué. - + The object along which the copies will be distributed. It must contain 'Edges'. L'objet le long duquel les copies seront distribuées. Il doit contenir des "Arêtes". @@ -7203,9 +7177,9 @@ régler à Vrai pour la fusion ou Faux pour un composé Facteur de rotation du réseau torsadé. - - + + Show the individual array elements (only for Link arrays) Afficher les éléments isolés du réseau (uniquement pour les réseaux de liens) @@ -7334,8 +7308,8 @@ Lorsque vous utilisez un style enregistré, certaines des propriétés de la vue elles ne seront modifiables qu'en changeant le style à l'aide de l'outil "Éditeur de style d'annotation". - + The base object that will be duplicated L'objet de base qui sera dupliqué @@ -7653,7 +7627,7 @@ Ceci écrase la propriété Clip de l'objet de base. The placement of this object - Le placement de cet objet + La position de cet objet @@ -8138,14 +8112,14 @@ Laisser vide pour la valeur par défaut du système. Utiliser "arch" pour forcer la notation architecturale US - + Arrow size Taille des flèches - + Arrow type Type des flèches @@ -8210,7 +8184,7 @@ au-delà de la ligne de la dimension Draft - Tirant d'eau + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 9561161c11..c8c717be46 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index 7794655b87..93b278f4e8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -1547,7 +1547,6 @@ pattern definitions to be added to the standard patterns Tamaño da fonte - @@ -1555,6 +1554,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1655,8 +1655,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1978,9 +1978,9 @@ from the Addon Manager. Permitir que o FreeCAD baixe e actualice automaticamente as bibliotecas DXF - - + + Import options Opcións de importación @@ -2198,8 +2198,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Opcións de exportación @@ -2476,8 +2476,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automática @@ -2772,8 +2772,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3182,7 +3182,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Xirar @@ -3205,7 +3205,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Separación @@ -3398,59 +3398,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3558,65 +3558,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3641,54 +3641,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Mover - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3699,75 +3699,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3777,7 +3777,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3792,17 +3792,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3832,13 +3832,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3854,31 +3854,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3886,7 +3886,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3991,12 +3991,12 @@ The final angle will be the base angle plus this amount. Polígono - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4006,7 +4006,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4016,8 +4016,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4057,14 +4057,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Facer B-spline @@ -4226,14 +4226,14 @@ The final angle will be the base angle plus this amount. Elipse - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4326,25 +4326,25 @@ The final angle will be the base angle plus this amount. Acoutamento - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4374,12 +4374,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4389,12 +4389,12 @@ The final angle will be the base angle plus this amount. Rectángulo - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4409,13 +4409,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4425,17 +4425,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4445,13 +4445,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4476,7 +4476,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4496,14 +4496,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4514,26 +4514,26 @@ The final angle will be the base angle plus this amount. Polar array - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4553,16 +4553,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4577,8 +4577,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4697,17 +4697,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4834,38 +4834,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4875,18 +4872,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4903,8 +4903,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4918,7 +4918,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4983,12 +4983,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,9 +5315,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5504,7 +5504,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Clonar @@ -5515,21 +5515,21 @@ from menu Tools -> Addon Manager Pendente - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Verdadeiro - - + + False Falso @@ -5839,12 +5839,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6118,12 +6118,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Mover - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6150,12 +6150,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6165,12 +6165,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6218,32 +6218,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7135,19 +7109,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7191,8 +7165,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7207,9 +7181,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7338,8 +7312,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8142,14 +8116,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Tamaño das frechas - + Arrow type Tipo de frechas diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index 301a4d2a09..047ca6068d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 88bee443e0..8817bf75f1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -575,8 +575,7 @@ Negativne vrijednosti rezultirat će kopijom proizvedenom u negativnom smjeru. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Ako je označeno, rezultirajući objekti u matrici bit će spojeni ako se dodiruju. -Ovo djeluje samo ako je "Povezana matrica" isključen. - +Ovo djeluje samo ako je "Povezana matrica" isključen. @@ -588,8 +587,7 @@ Ovo djeluje samo ako je "Povezana matrica" isključen. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Ako je označeno, rezultirajući objekt bit će "Povezana matrica" umjesto uobičajenog polja. -Povezana matrica efikasnija je pri stvaranju više kopija, ali ne može ih se spojiti zajedno. - +Povezana matrica efikasnija je pri stvaranju više kopija, ali ne može ih se spojiti zajedno. @@ -677,7 +675,8 @@ Promijenite smjer same osi u uređivaču svojstava. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. Ako je označeno, rezultirajući objekti u matrici bit će spojeni ako se dodiruju. -Ovo djeluje samo ako je "Povezana matrica" isključen. +Ovo djeluje samo ako je "Povezana matrica" isključen. + @@ -689,7 +688,8 @@ Ovo djeluje samo ako je "Povezana matrica" isključen. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. Ako je označeno, rezultirajući objekt bit će "Povezana matrica" umjesto uobičajenog polja. -Povezana matrica efikasnija je pri stvaranju više kopija, ali ne može ih se spojiti zajedno. +Povezana matrica efikasnija je pri stvaranju više kopija, ali ne može ih se spojiti zajedno. + @@ -1569,7 +1569,6 @@ sadrže definicije uzoraka koje će se dodati standardnim uzorcima Veličina Pisma - @@ -1577,6 +1576,7 @@ sadrže definicije uzoraka koje će se dodati standardnim uzorcima + mm mm @@ -1677,8 +1677,8 @@ skalarnoj oznaci . Ako je skala 1:100, množitelj je 100. Zadana širina linije - + px px @@ -2001,9 +2001,9 @@ iz Upravitelja dodataka Omogući FreeCADu da automatski učita i nadogradi DXF biblioteke - - + + Import options Postavke uvoza @@ -2226,8 +2226,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Ako je postavljeno na '0', cijela je krivulja (spline) tretirana kao ravni segment. - + Export options Postavke izvoza @@ -2512,8 +2512,8 @@ Ove linije su deblje od normalnih linija mreže. - + Automatic Automatsko @@ -2808,8 +2808,8 @@ Ove linije su deblje od normalnih linija mreže. - - + + @@ -3218,7 +3218,7 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr - + Rotate Rotiraj @@ -3241,7 +3241,7 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr - + Offset Pomak @@ -3437,59 +3437,59 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Nema aktivnog dokumenta. Prekid. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Nije moguće umetnuti novi objekt u skalirani dio - + Symbol not implemented. Using a default symbol. Simbol nije implementiran. Korištenje zadanog simbola. - + image is Null slika je Ništavna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sustavu ili u datoteci resursa - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Nema 'ViewObject.RootNode'. @@ -3597,65 +3597,65 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Odaberite točku odredišta - + Create Label Stvori oznaku - - + + Pick endpoint of leader line Odaberite krajnju točku linije vodilice - - + + Pick text position Odaberite poziciju teksta - - - + + + Pick first point Odaberite prvu točku - + Create Line Napravi Liniju - + Create Wire Napravi Žicu - + Polyline Višestruka (izlomljena) linija - - - - - - - + + + + + + + Pick next point Odaberite slijedeću točku - + Unable to create a Wire from selected objects Nije moguće stvoriti žicu od odabranih objekata - + Convert to Wire Pretvori u Žicu @@ -3680,54 +3680,54 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Odaberite točku položaja - + Create Text Stvori tekst - + Select an object to convert. Odaberite objekt za konvertiranje. - + Convert to Sketch Pretvori u Skicu - + Convert to Draft Pretvori u Nacrt - + Convert Draft/Sketch Pretvori Nacrt/Skicu - + Select an object to move Odaberite objekt za pomjeranje - + Pick start point Odaberite početnu točku - - + + Pick end point Odaberite krajnju točku - + Move Pomicanje - - + + Some subelements could not be moved. Neke pod elemente nije bilo moguće pomjeriti. @@ -3738,75 +3738,75 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Odaberite točku središta - - - + + + - + Pick radius Odaberite polumjer - - - + + + Start angle Početni kut - - + + Pick start angle Odaberite početni kut - - - + + + Aperture angle Kut otvora - + Pick aperture Odaberite otvor - + Create Circle (Part) Napravite krug (Dio) - + Create Circle Stvori krug - + Create Arc (Part) Napravite luk (Dio) - + Create Arc Stvori Luk - + Pick aperture angle Odaberite kut otvora - - + + Arc by 3 points Luk iz 3 točke - + Create Arc by 3 points Create Arc by 3 points @@ -3816,7 +3816,7 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Pokaži/Sakrij rešetku - + Select an object to edit Odaberite objekt za uređivanje @@ -3831,17 +3831,17 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Uređivanje čvorova - + No edit point found for selected object Nije pronađena točka uređivanja za odabrani objekt - + Too many objects selected, max number set to: Odabrano je previše objekata, maksimalni broj postavljen na: - + : this object is not editable : ovaj objekt nije moguće uređivati @@ -3871,13 +3871,13 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Spremi datoteku stila - + Select an object to project Odaberite jedan objekt za projekt - - + + Create Point Stvori točku @@ -3893,31 +3893,31 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). - + Base angle Kut odredišta - + The base angle you wish to start the rotation from Osnovni kut od kojeg želite započeti rotaciju - + Pick base angle Odaberite kut odredišta - + Rotation Rotacija - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Količina rotacije koju želite izvesti. @@ -3925,7 +3925,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. - + Pick rotation angle Odaberite kut rotacije @@ -4030,12 +4030,12 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Višekutnik - + Create Polygon (Part) Stvori Višekutnik (Dio) - + Create Polygon Stvori Višekutnik @@ -4045,7 +4045,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Kliknite bilo gdje na liniju da biste je podijelili. - + Split line Podjeli liniju @@ -4055,8 +4055,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Odaberite objekte za skraćivanje ili produživanje - + Pick distance Odaberite udaljenost @@ -4096,14 +4096,14 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Kriva je zatvorena - + Last point has been removed Zadnja točka je uklonjena - + Create B-spline Stvaranje B-spline @@ -4267,14 +4267,14 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Elipsa - - + + Create Ellipse Napravi Elipsu - - + + Pick opposite point Odaberi suprotnu točku @@ -4367,27 +4367,27 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Dimenzija - - - - + + + + Create Dimension Stvori Dimenziju - + Create Dimension (radial) Stvori dimenziju (radijalno) - + Edge too short! Rub je prekratak! - + Edges don't intersect! Rubovi se ne sijeku! @@ -4417,12 +4417,12 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Odaberite završnu točku premještanja - + Turning one Rectangle into a Wire Prebaci jedan Pravokutnik u Žicu - + Stretch Razvuci @@ -4432,12 +4432,12 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Pravokutnik - + Create Plane Napravi Ravninu - + Create Rectangle Napravi Pravokutnik @@ -4452,13 +4452,13 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Odaberite početnu točku linije zrcaljenja - + Mirror Zrcaljenje - - + + Pick end point of mirror line Odaberite krajnju točku linije zrcaljenja @@ -4468,17 +4468,17 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Matrica zaokrenuta po putu - + Select an object to clone Odaberite objekt za kloniranje - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4488,13 +4488,13 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Promjeni nagib - - + + Select an object to upgrade Odaberite objekt za nadogradnju - + Upgrade Nadogradi @@ -4519,7 +4519,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Žao nam je, pomak Bezierove krivulje trenutno još uvijek nije podržan - + Create 2D view Stvaranje 2D prikaza @@ -4539,14 +4539,14 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Izliječiti - + Downgrade Vraćanje na niži stupanj - - + + Task panel: Ploča zadataka: @@ -4557,26 +4557,26 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Polarna matrica - - + + At least one element must be selected. Barem jedna stavka mora biti označena. - - + + Selection is not suitable for array. Odabir nije prikladan za matricu. - - - - + + + + Object: Objekt: @@ -4596,16 +4596,16 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Kut je ispod -360 stupnjeva. Postavljen je na ovu vrijednost, za nastavak. - - + + Fuse: Spoji: - - + + Create Link array: Stvori niz poveznica: @@ -4620,8 +4620,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Polarni kut: - + Center of rotation: Centar rotacije: @@ -4740,17 +4740,17 @@ Konačni kut bit će osnovni kut plus ovaj iznos. promijenjen tip svojstva 'Praćenje' - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: kosi kut mora biti u rasponu od -80 do +80 stupnjeva - + ShapeString: string has no wires Tekstualni Oblik: slova su bez linija - + ShapeString: face creation failed for one character Oblik-tekstom: stvaranje lica za jedan znak nije uspjelo @@ -4878,38 +4878,35 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Nije moguće generirati oblik: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Pogrešan unos: mora bit broj. - - - - + @@ -4919,18 +4916,21 @@ Konačni kut bit će osnovni kut plus ovaj iznos. - + + + + Wrong input: must be a vector. Pogrešan unos: mora biti vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Pogrešan unos: mora biti popis ili niz riječi ili jedna riječ. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Pogrešan unos: mora biti "Original", "Frenet" ili "Tangencial". @@ -4947,8 +4947,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Ulaz: jedna vrijednost proširena na vektor. - + Wrong input: must be an integer number. Pogrešan unos: mora biti cijeli broj. @@ -4962,7 +4962,7 @@ Konačni kut bit će osnovni kut plus ovaj iznos. - + Wrong input: must be a placement, a vector, or a rotation. Pogrešan unos: mora biti položaj, vektor ili rotacija. @@ -5029,12 +5029,12 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Pogrešan unos: mora biti popis od dva elementa. Na primjer, [objekt, 'Rub1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Pogrešan unos: objekt ima pogrešan tip. @@ -5362,9 +5362,9 @@ Konačni kut bit će osnovni kut plus ovaj iznos. dodano svojstvo pogleda 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' preimenovane opcije 'DisplayMode' u 'World/Screen' @@ -5551,7 +5551,7 @@ iz izbornika Alati-> Upravitelj dodataka Pogreška: json modul nije pronađen. Nije moguće spremiti stil - + Clone Klon @@ -5562,21 +5562,21 @@ iz izbornika Alati-> Upravitelj dodataka Nagib - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Smjer pomaka nije definiran. Prvo pomaknite miš s obje strane objekta kako biste naznačili smjer - - + + True Točno - - + + False Netočno @@ -5886,12 +5886,12 @@ Ako je odabrano previše objekata ili previše pod-elemenata, samo prvi u svakom Draft_Wire - + Polyline Višestruka (izlomljena) linija - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Stvara liniju iz više točaka (višestruke linije (polyline)). CTRL za prikvači, SHIFT za ograniči. @@ -6167,12 +6167,12 @@ Međutim, jedna Skica s nepovezanim tragovima bit će pretvorena u nekoliko poje Draft_Move - + Move Pomicanje - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6198,12 +6198,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Luk iz 3 točke - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Stvara kružni luk od 3 točke . @@ -6213,12 +6213,12 @@ CTRL za prikvači, SHIFT za ograničiti. Draft_ArcTools - + Arc tools Alati luka - + Create various types of circular arcs. Napravi razne vrste kružnih lukova. @@ -6266,32 +6266,6 @@ Pritisnite E ili ALT+lijevi klik za prikaz kontekstnog izbornika na podržanim čvorovima i na podržanim objektima. - - Draft_AddPoint - - - Add point - Dodaj točku - - - - Adds a point to an existing Wire or B-spline. - Dodaje točku na postojeću žicu ili B-krivulju. - - - - Draft_DelPoint - - - Remove point - Ukloni točku - - - - Removes a point from an existing Wire or B-spline. - Uklanja točku iz postojeće žice ili B-krivulje. - - Draft_CircularArray @@ -7191,19 +7165,19 @@ označi Točno za spajanje ili Netočno za složeni spoj - + Create a face Napravite lice + + - - The area of this object Područje ovog objekta @@ -7247,8 +7221,8 @@ označi Točno za spajanje ili Netočno za složeni spoj Osnovni objekt koji će biti dupliciran. - + The object along which the copies will be distributed. It must contain 'Edges'. Objekt po kojem će se primjerci distribuirati. Mora sadržavati 'Rubove'. @@ -7263,9 +7237,9 @@ označi Točno za spajanje ili Netočno za složeni spoj Faktor rotacije prepletene matrice. - - + + Show the individual array elements (only for Link arrays) Prikaži pojedinačne elemente niza (samo za vezane nizove) @@ -7397,8 +7371,8 @@ Kada se koristi spremljeni stil neka od svojstava pregleda će se moći samo či ona će se moći mijenjati samo promjenom stila pomoću 'Urednika za Anotacijske Stilove'. - + The base object that will be duplicated Osnovni objekt koji će biti dupliciran @@ -8206,14 +8180,14 @@ Ostavite prazno za zadane postavke sustava. Upotrijebite 'arch' za prisilno označavanje US luka - + Arrow size Veličina strelice - + Arrow type Vrsta strelice diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 74810ba734..72b8d56985 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index bfc64121d4..f4fb0b2b4a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -1174,7 +1174,7 @@ megjegyzések méretarány modulban beállított skálának. Ha a méretarány 1 Arrow size - Nyíl mérete + Nyíl méret @@ -1546,7 +1546,6 @@ a szabványos mintákhoz hozzáadandó mintadefiníciókkal Betűméret - @@ -1554,6 +1553,7 @@ a szabványos mintákhoz hozzáadandó mintadefiníciókkal + mm mm @@ -1654,8 +1654,8 @@ megjegyzések méretarány modulban beállított skálának. Ha a méretarány 1 Alapértelmezett vonalszélesség - + px px @@ -1697,7 +1697,7 @@ megjegyzések méretarány modulban beállított skálának. Ha a méretarány 1 Arrow size - Nyíl méret + Nyíl mérete @@ -1977,9 +1977,9 @@ a Kiegészítők kezelőjéből. Engedélyezze a FreeCAD-hoz az automatikus DXF-könyvtárak letöltését és frissítését - - + + Import options Importálási beállítások @@ -2197,8 +2197,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Ha '0'-ra van állítva, a teljes csíkozást egyenes szakaszként kezeli. - + Export options Exportálási beállítások @@ -2474,8 +2474,8 @@ Ezek a vonalak vastagabbak, mint a normál rácsvonalak. Ez az a módszer, amelyet a FreeCAD a DWG fájlok DXF-re konvertálására fog használni. Ha az "Automatikus" opció van kiválasztva, a FreeCAD megpróbálja megtalálni az alábbi konverterek egyikét ugyanabban a sorrendben, amelyben itt láthatók. Ha a FreeCAD nem találja egyiket sem, előfordulhat, hogy ki kell választania egy adott konvertert, és itt meg kell adnia annak elérési útját. Válassza ki a "dwg2dxf" segédprogramot, ha LibreDWG-t, "ODAFileConverter"-t használ, ha ODA fájlkonvertert használ, vagy a "dwg2dwg" segédprogramot, ha a QCAD Pro verzióját használja. - + Automatic Automatikus @@ -2770,8 +2770,8 @@ Ezek a vonalak vastagabbak, mint a normál rácsvonalak. - - + + @@ -3180,7 +3180,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve - + Rotate Forgatás @@ -3203,7 +3203,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve - + Offset Eltolás @@ -3396,59 +3396,59 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. A jegyzeteszközök által használt méretezés beállítása - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Nincs aktív dokumentum. Megszakítás. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Helytelen bemenet: az a tárgy {} nincs a dokumentumban. - + Unable to insert new object into a scaled part Nem lehet új tárgyat beszúrni egy méretezett alkatrészbe - + Symbol not implemented. Using a default symbol. A szimbólum nincs megvalósítva. Alapértelmezett szimbólum használata. - + image is Null a kép üres - + filename does not exist on the system or in the resource file a fájlnév nem létezik a rendszeren vagy a forrásfájlban - + unable to load texture anyagminta betöltése sikertelen - + Does not have 'ViewObject.RootNode'. Nincs 'ViewObject.RootNode'. @@ -3521,7 +3521,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Wrong input: unknown document {} - Wrong input: unknown document {} + Helytelen bemenet: ismeretlen dokumentum {} @@ -3556,65 +3556,65 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Válassz célpontot - + Create Label Címke létrehozása - - + + Pick endpoint of leader line Vezérvonal végpontjának kiválasztása - - + + Pick text position Szöveg helyzet kiválasztása - - - + + + Pick first point Első pont kiválasztása - + Create Line Vonal létrehozása - + Create Wire Drótváz létrehozása - + Polyline Vonallánc - - - - - - - + + + + + + + Pick next point Következő pont kiválasztása - + Unable to create a Wire from selected objects Nem sikerült létrehozni egy dróthálót a kijelölt tárgyból - + Convert to Wire Dróthálóvá alakít @@ -3639,54 +3639,54 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Válasszon ki pozíciót - + Create Text Szöveg létrehozása - + Select an object to convert. Válassza ki az átalakítandó tárgyat. - + Convert to Sketch Alakítsa vázlattá - + Convert to Draft Alakítsa tervrajzzá - + Convert Draft/Sketch Alakítsa tervrajzzá/vázlattá - + Select an object to move Tárgy kijelölése mozgatáshoz - + Pick start point Kezdőpont kiválasztása - - + + Pick end point Végpont kiválasztása - + Move Mozgat - - + + Some subelements could not be moved. Egyes alelemeket nem lehetett áthelyezni. @@ -3697,77 +3697,77 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Középpont kiválasztása - - - + + + - + Pick radius Sugár kiválasztása - - - + + + Start angle Kezdő szög - - + + Pick start angle Kezdő fok kiválasztása - - - + + + Aperture angle Nyílás szöge - + Pick aperture Nyílás kiválasztása - + Create Circle (Part) Kör létrehozása (rész) - + Create Circle Kör rajzolása - + Create Arc (Part) Ív létrehozása (rész) - + Create Arc Ív létrehozása - + Pick aperture angle Nyílás szögének kiválasztása - - + + Arc by 3 points Körív 3 pontból - + Create Arc by 3 points - Create Arc by 3 points + Körív létrehozása 3 ponttal @@ -3775,7 +3775,7 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Rács kapcsolása - + Select an object to edit Jelöljön ki egy tárgyat a szerkesztéshez @@ -3790,17 +3790,17 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Csomópont szerkesztése - + No edit point found for selected object Kijelölt tárgyhoz nem található szerkesztési pont - + Too many objects selected, max number set to: Túl sok tárgyat jelölt, a beállított maximális szám: - + : this object is not editable : ez a tárgy nem szerkeszthető @@ -3830,13 +3830,13 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Stílusfájl mentése - + Select an object to project Tárgy kijelölése vetítéshez - - + + Create Point Pont létrehozása @@ -3852,31 +3852,31 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. - + Base angle Alapszög - + The base angle you wish to start the rotation from Az alapszög, amelyből a forgatás elkezdődik - + Pick base angle Alap szög kiválasztása - + Rotation Forgatás - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. A végrehajtani kívánt forgatási mennyiség. @@ -3884,7 +3884,7 @@ A végső szög lesz az alapszög plusz ennek összege. - + Pick rotation angle Válasszon ki elforgatási szöget @@ -3989,12 +3989,12 @@ A végső szög lesz az alapszög plusz ennek összege. Sokszög - + Create Polygon (Part) Sokszög létrehozása (alkatrész) - + Create Polygon Sokszög létrehozása @@ -4004,7 +4004,7 @@ A végső szög lesz az alapszög plusz ennek összege. Kattintson bárhol egy vonalon, annak felosztásához. - + Split line Vonal felosztása @@ -4014,8 +4014,8 @@ A végső szög lesz az alapszög plusz ennek összege. Válassza ki a tárgyakat a vágáshoz/nyújtáshoz - + Pick distance Távolság kiválasztása @@ -4055,14 +4055,14 @@ A végső szög lesz az alapszög plusz ennek összege. Görbe lezárva - + Last point has been removed Utolsó pont eltávolítva - + Create B-spline B-görbe létrehozása @@ -4224,14 +4224,14 @@ A végső szög lesz az alapszög plusz ennek összege. Ellipszis - - + + Create Ellipse Ellipszis létrehozása - - + + Pick opposite point Ellenkező pont kiválasztása @@ -4324,25 +4324,25 @@ A végső szög lesz az alapszög plusz ennek összege. Méret - - - - + + + + Create Dimension Méretek létrehozása - + Create Dimension (radial) Méret létrehozása (sugárirányú) - + Edge too short! Él túl rövid! - + Edges don't intersect! Élek nem metszők! @@ -4372,12 +4372,12 @@ A végső szög lesz az alapszög plusz ennek összege. Elmozdulás végpontjának kiválasztása - + Turning one Rectangle into a Wire Egy téglalap átalakítása drótvázzá - + Stretch Nyújtás @@ -4387,12 +4387,12 @@ A végső szög lesz az alapszög plusz ennek összege. Téglalap - + Create Plane Sík létrehozása - + Create Rectangle Téglalap rajzolása @@ -4407,13 +4407,13 @@ A végső szög lesz az alapszög plusz ennek összege. Tükrözési egyenes kezdőpontjának kiválasztása - + Mirror Tükrözés - - + + Pick end point of mirror line Tükrözési egyenes végpontjának kiválasztása @@ -4423,19 +4423,19 @@ A végső szög lesz az alapszög plusz ennek összege. Útvonal csavart elrendezés - + Select an object to clone Egy tárgy kijelölése klónozáshoz - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Nem lehet tárgya(aka)t klónozni alakzat nélkül, megszakít - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Nem lehet tárgya(aka)t klónozni alakzat nélkül, kihagyja ezeket @@ -4443,13 +4443,13 @@ A végső szög lesz az alapszög plusz ennek összege. Lejtés módosítása - - + + Select an object to upgrade Jelöljön ki egy tárgyat a frissítéshez - + Upgrade Frissítés @@ -4474,7 +4474,7 @@ A végső szög lesz az alapszög plusz ennek összege. Bézier görbe eltolás jelenleg még nem támogatott - + Create 2D view 2D nézet létrehozása @@ -4494,14 +4494,14 @@ A végső szög lesz az alapszög plusz ennek összege. Javít - + Downgrade Visszaminősít - - + + Task panel: Feladat panel: @@ -4512,26 +4512,26 @@ A végső szög lesz az alapszög plusz ennek összege. Poláris elrendezés - - + + At least one element must be selected. Legalább egy tételt ki kell választani. - - + + Selection is not suitable for array. A kijelölés nem alkalmas elrendezéshez. - - - - + + + + Object: Tárgy: @@ -4551,16 +4551,16 @@ A végső szög lesz az alapszög plusz ennek összege. A szög nem éri el a 360 fokot. Ez az érték a folytatáshoz van beállítva. - - + + Fuse: Egybeolvaszt: - - + + Create Link array: Elrendezés csatolás létrehozása: @@ -4575,8 +4575,8 @@ A végső szög lesz az alapszög plusz ennek összege. Poláris szög: - + Center of rotation: Forgatás középpontja: @@ -4695,17 +4695,17 @@ A végső szög lesz az alapszög plusz ennek összege. a 'Nyomonkövetés' tulajdonság típusa megváltozott - + ShapeString: oblique angle must be in the -80 to +80 degree range Szövegalakzat: a ferde szögnek a -80 és +80 fok közötti tartományban kell lennie - + ShapeString: string has no wires ShapeString: A karakterláncnak nincsenek dróthálói - + ShapeString: face creation failed for one character Alak a szövegből: a felület létrehozása sikertelen az egyik karakter esetében @@ -4787,12 +4787,12 @@ A végső szög lesz az alapszög plusz ennek összege. Two objects are needed. - Two objects are needed. + Két tárgy szükséges. One object is not valid. - One object is not valid. + Egy tárgy érvénytelen. @@ -4832,38 +4832,35 @@ A végső szög lesz az alapszög plusz ennek összege. Alakzat nem hozható létre: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Helytelen bemenet: alap_tárgy nincs a dokumentumban. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Helytelen bemenet: útvonal_tárgy nincs a dokumentumban. - - - - - - + + + + + + Wrong input: must be a number. Rossz bemenet: számnak kell lennie. - - - - + @@ -4873,18 +4870,21 @@ A végső szög lesz az alapszög plusz ennek összege. - + + + + Wrong input: must be a vector. Rossz bemenet: vektornak kell lennie. - + Wrong input: must be a list or tuple of strings, or a single string. Helytelen bemenet: karakter rekord listának vagy egyetlen karakternek kell lennie. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Hibás bemenet: 'Eredeti', 'Frenet' vagy 'Érintő' kell, hogy legyen. @@ -4901,8 +4901,8 @@ A végső szög lesz az alapszög plusz ennek összege. Bemenet: vektorosra bővített egyetlen érték. - + Wrong input: must be an integer number. Helytelen bemenet: egész számnak kell lennie. @@ -4916,7 +4916,7 @@ A végső szög lesz az alapszög plusz ennek összege. - + Wrong input: must be a placement, a vector, or a rotation. Helytelen bemenet: elhelyezésnek, vektornak vagy forgatásnak kell lennie. @@ -4924,22 +4924,22 @@ A végső szög lesz az alapszög plusz ennek összege. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Helytelen bemenet: a cél_tárgy nem lehet lista. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Helytelen bemenet: cél_tárgy nincs a dokumentumban. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Helytelen bemenet: részelemeknek rekord listának vagy egyetlen karakternek kell lennie. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Hibás bemenet: az alelem {} nincs a tárgyban. @@ -4968,7 +4968,7 @@ A végső szög lesz az alapszög plusz ennek összege. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Helytele bemenet: pontoknak {} legalább két vektorból kell állnia. @@ -4981,12 +4981,12 @@ A végső szög lesz az alapszög plusz ennek összege. Helytelen bemenet: két elemből kell állnia. Például [tárgy, 'Él1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Helytelen bemenet: pont_tárgy nincs a dokumentumban. - + Wrong input: object has the wrong type. Helytelen bemenet: a tárgy rossz típusú. @@ -5003,13 +5003,13 @@ A végső szög lesz az alapszög plusz ennek összege. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Helytelen bemenet: a él_tárgy nem lehet lista vagy sor. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Helytelen bemenet: él_tárgy nincs a dokumentumban. @@ -5313,9 +5313,9 @@ A végső szög lesz az alapszög plusz ennek összege. nézet tulajdonság hozzáadva 'SzövegSzín' - - + + renamed 'DisplayMode' options to 'World/Screen' átnevezte a "Megjelenítési mód" opciót "Környezet / Képernyő" opcióra @@ -5501,7 +5501,7 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Hiba: a json modul nem található. A stílus mentése sikertelen - + Clone Klónozás @@ -5512,21 +5512,21 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Lejtő - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Az eltolás iránya nem meghatározott. Először mozgassa az egeret a tárgy egyik oldalára, hogy meghatározza az irányt - - + + True Igaz - - + + False Hamis @@ -5796,7 +5796,7 @@ Az összekapcsolt elrendezés több példány feldolgozásakor hatékonyabb, de Label - Címke + Felirat @@ -5836,12 +5836,12 @@ a feliraton való tájékoztatásra. Draft_Wire - + Polyline Vonallánc - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Többpontos vonalat (vonalláncot) hoz létre. CTRL illesztéshez, SHIFT kényszerítéshez. @@ -6115,12 +6115,12 @@ Azonban a leválasztott nyomkövetésű egyedi vázlatok több egyedi vázlat t Draft_Move - + Move Mozgat - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6147,12 +6147,12 @@ CTRL az illesztéshez, SHIFT a kényszerítéshez. Draft_Arc_3Points - + Arc by 3 points Körív 3 pontból - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Körkörös ívet hoz létre 3 pont kiválasztásával. @@ -6162,12 +6162,12 @@ CTRL illesztéshez, a SHIFT a kényszerítéshez. Draft_ArcTools - + Arc tools Íveszközök - + Create various types of circular arcs. Hozzon létre különböző típusú köríveket. @@ -6215,32 +6215,6 @@ A helyi menü megjelenítéséhez nyomja le az E vagy az ALT+LeftClick billenty támogatott csomópontokon és támogatott tárgyakon. - - Draft_AddPoint - - - Add point - Pont hozzáadása - - - - Adds a point to an existing Wire or B-spline. - Pontot ad egy meglévő vonalhoz vagy B-görbéhez. - - - - Draft_DelPoint - - - Remove point - Pont eltávolítása - - - - Removes a point from an existing Wire or B-spline. - Eltávolít egy pontot egy meglévő vonalból vagy B-görbéből. - - Draft_CircularArray @@ -6733,7 +6707,7 @@ Ez zárt alakzatokhoz és szilárd testekhez készült, és nem befolyásolja a Dimension - Dimenzió + Méret @@ -7130,19 +7104,19 @@ Igazra állítva egyesíti vagy hamisra az összetételhez - + Create a face Felület létrehozása + + - - The area of this object Ennek a tárgynak a területe @@ -7186,8 +7160,8 @@ Igazra állítva egyesíti vagy hamisra az összetételhez A másolandó alap tárgy. - + The object along which the copies will be distributed. It must contain 'Edges'. A tárgy, ami körül a másolatokat elosztják. Tartalmaznia kell 'Éleket'. @@ -7202,9 +7176,9 @@ Igazra állítva egyesíti vagy hamisra az összetételhez A csavart tömb forgatási tényezője. - - + + Show the individual array elements (only for Link arrays) Az egyes tömbelemek megmutatása (csak csatolási tömbökhöz) @@ -7333,8 +7307,8 @@ Mentett stílus használatakor a nézettulajdonságok némelyike írásvédett. Ezeket csak a stílus módosításával lehet szerkeszteni a 'Jegyzetstílus szerkesztő' eszközzel. - + The base object that will be duplicated Az alap tárgy, melyet kettőzni kell @@ -8135,14 +8109,14 @@ Hagyja üresen a rendszer alapértelmezetthez. Használja az 'arch' kifejezést amerikai US arch jelölésének kikényszerítésére - + Arrow size Nyíl méret - + Arrow type Nyíl típus diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index 7b0989d981..652dc491b6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index 7df3b9b9be..6d5de53316 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -943,14 +943,14 @@ value by using the [ and ] keys while drawing Line width - Lebar garis + Tebal garis px - px + piksel @@ -1126,7 +1126,7 @@ value by using the [ and ] keys while drawing Font size - Ukuran huruf + Ukuran fonta @@ -1537,7 +1537,6 @@ pattern definitions to be added to the standard patterns Ukuran huruf - @@ -1545,6 +1544,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1645,8 +1645,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1968,9 +1968,9 @@ from the Addon Manager. Biarkan FreeCAD mendownload dan memperbarui perpustakaan DXF secara otomatis - - + + Import options Pilihan impor @@ -2188,8 +2188,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Pilihan ekspor @@ -2466,8 +2466,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Otomatis @@ -2762,8 +2762,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3172,7 +3172,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Putar @@ -3195,7 +3195,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Mengimbangi @@ -3388,59 +3388,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Salah masukan: obyek {} tidak ada dalam dokumen - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3513,7 +3513,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Wrong input: unknown document {} - Wrong input: unknown document {} + Salah masukan: dokumen {} tidak dikenal @@ -3548,65 +3548,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Buat Garis - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3631,54 +3631,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Buat Teks - + Select an object to convert. Select an object to convert. - + Convert to Sketch Konversikan ke Sketsa - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Pindah - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3689,77 +3689,77 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Buat Lingkaran - + Create Arc (Part) Create Arc (Part) - + Create Arc Buat Busur - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points - Create Arc by 3 points + Buat busur dengan tiga titik @@ -3767,7 +3767,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3782,17 +3782,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3822,13 +3822,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3844,31 +3844,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Perputaran - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3876,7 +3876,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3981,12 +3981,12 @@ The final angle will be the base angle plus this amount. Poligon - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -3996,7 +3996,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4006,8 +4006,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4047,14 +4047,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Buat B-spline @@ -4216,14 +4216,14 @@ The final angle will be the base angle plus this amount. Elips - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4316,25 +4316,25 @@ The final angle will be the base angle plus this amount. Dimensi - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4364,12 +4364,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4379,12 +4379,12 @@ The final angle will be the base angle plus this amount. Empat persegi panjang - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4399,13 +4399,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4415,19 +4415,19 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Tidak bisa mengklon obyek (obyek) tanpa Bentuk, aksi dibatalkan - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Tidak bisa mengklon obyek (obyek), aksi dilewati @@ -4435,13 +4435,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4466,7 +4466,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4486,14 +4486,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4504,26 +4504,26 @@ The final angle will be the base angle plus this amount. Polar array - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4543,16 +4543,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4567,8 +4567,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4687,17 +4687,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4824,38 +4824,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4865,18 +4862,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4893,8 +4893,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4908,7 +4908,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4973,12 +4973,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5305,9 +5305,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5494,7 +5494,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Klon @@ -5505,21 +5505,21 @@ from menu Tools -> Addon Manager Slope - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Benar - - + + False Salah @@ -5829,12 +5829,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6108,12 +6108,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Pindah - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6140,12 +6140,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6155,12 +6155,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6208,32 +6208,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -6891,7 +6865,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Upgrade - Upgrade + Tingkatkan @@ -7125,19 +7099,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7181,8 +7155,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7197,9 +7171,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7328,8 +7302,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8132,14 +8106,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Panah ukuran - + Arrow type Jenis Panah diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 0819d5f778..ca1fac068a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 3ffe509eb4..9c68fd21be 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -1548,7 +1548,6 @@ da aggiungere ai motivi standard Dimensione del carattere - @@ -1556,6 +1555,7 @@ da aggiungere ai motivi standard + mm mm @@ -1656,8 +1656,8 @@ nel widget scala di annotazione. Se la scala è 1:100 il moltiplicatore è 100.< Larghezza predefinita della linea - + px px @@ -1979,9 +1979,9 @@ da Addon Manager. Consenti a FreeCAD di scaricare e aggiornare automaticamente le librerie DXF - - + + Import options Opzioni di importazione @@ -2199,8 +2199,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Se impostato a '0' l'intera spline viene trattata come un segmento retto. - + Export options Opzioni di esportazione @@ -2431,12 +2431,12 @@ These lines are thicker than normal grid lines. Snap symbol color - Snap symbol color + Colore simbolo aggancio The color for snap symbols - The color for snap symbols + Il colore predefinito per i simboli di aggancio @@ -2474,8 +2474,8 @@ These lines are thicker than normal grid lines. Questo è il metodo che FreeCAD utilizzerà per convertire i file DWG in DXF. Se si sceglie "Automatico", FreeCAD cercherà di trovare uno dei seguenti convertitori nello stesso ordine in cui sono mostrati qui. Se FreeCAD non è in grado di trovarne, potrebbe essere necessario scegliere un convertitore specifico e indicare il suo percorso qui sotto. Scegliere l'utilità "dwg2dxf" se si utilizza LibreDWG, "ODAFileConverter" se si utilizza il convertitore di file ODA, o l'utilità "dwg2dwg" se si utilizza la versione pro di QCAD. - + Automatic Automatica @@ -2552,7 +2552,7 @@ These lines are thicker than normal grid lines. Interface - Interface + Interfaccia @@ -2770,8 +2770,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3179,7 +3179,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Ruota @@ -3202,7 +3202,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Offset @@ -3390,59 +3390,59 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Imposta la scala usata dagli strumenti di annotazione bozza - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Nessun documento attivo, operazione fallita. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Immissione errata: oggetto {} non nel documento. - + Unable to insert new object into a scaled part Impossibile inserire il nuovo oggetto in una parte scalata - + Symbol not implemented. Using a default symbol. Simbolo non implementato. Usare un simbolo predefinito. - + image is Null l'immagine è Null - + filename does not exist on the system or in the resource file il nome file non esiste nel sistema o nei file risorsa - + unable to load texture impossibile caricare la texture - + Does not have 'ViewObject.RootNode'. Non ha 'ViewObject.RootNode'. @@ -3515,7 +3515,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. Wrong input: unknown document {} - Wrong input: unknown document {} + Immissione errata: documento sconosciuto {} @@ -3550,65 +3550,65 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Specificare il punto di destinazione - + Create Label Crea Etichetta - - + + Pick endpoint of leader line Scegliere il punto finale della linea guida - - + + Pick text position Scegliere la posizione del testo - - - + + + Pick first point Selezionare il primo punto - + Create Line Crea Linea - + Create Wire Crea Polilinea - + Polyline Polilinea - - - - - - - + + + + + + + Pick next point Selezionare il punto successivo - + Unable to create a Wire from selected objects Impossibile creare una Polilinea dagli oggetti selezionati - + Convert to Wire Converti in Polilinea @@ -3633,54 +3633,54 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Scegliere punto di posizione - + Create Text Crea Testo - + Select an object to convert. Seleziona un oggetto da convertire. - + Convert to Sketch Converti in Schizzo - + Convert to Draft Converti in Draft - + Convert Draft/Sketch Converti Draft/Schizzo - + Select an object to move Seleziona un oggetto da spostare - + Pick start point Scegliere il punto iniziale - - + + Pick end point Scegliere il punto finale - + Move Sposta - - + + Some subelements could not be moved. Alcuni sottoelementi non possono essere spostati. @@ -3691,77 +3691,77 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Selezionare il punto centrale - - - + + + - + Pick radius Scegliere il raggio - - - + + + Start angle Angolo iniziale - - + + Pick start angle Selezionare l'angolo iniziale - - - + + + Aperture angle Angolo di apertura - + Pick aperture Selezionare l'apertura - + Create Circle (Part) Crea Cerchio (Part) - + Create Circle Crea Cerchio - + Create Arc (Part) Crea Arco (Part) - + Create Arc Crea Arco - + Pick aperture angle Scegliere l'angolo di apertura - - + + Arc by 3 points Arco per 3 punti - + Create Arc by 3 points - Create Arc by 3 points + Crea un arco da 3 punti @@ -3769,7 +3769,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Attiva/disattiva griglia - + Select an object to edit Seleziona un oggetto da modificare @@ -3784,17 +3784,17 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Modifica i nodi - + No edit point found for selected object Nessun punto di modifica trovato per l'oggetto selezionato - + Too many objects selected, max number set to: Troppi oggetti selezionati, numero massimo impostato a: - + : this object is not editable : questo oggetto non è modificabile @@ -3811,7 +3811,7 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. JSON files (*.json *.JSON) - JSON files (*.json *.JSON) + File JSON (*.json *.JSON) @@ -3824,13 +3824,13 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Salva file stili - + Select an object to project Selezionare un oggetto da proiettare - - + + Create Point Crea Punto @@ -3846,31 +3846,31 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. - + Base angle Angolo base - + The base angle you wish to start the rotation from L'angolo di base da cui si desidera avviare la rotazione - + Pick base angle Scegliere l'angolo di base - + Rotation Rotazione - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. La quantità di rotazione che si desidera eseguire. @@ -3878,7 +3878,7 @@ L'angolo finale sarà l'angolo base più questa quantità. - + Pick rotation angle Scegliere l'angolo di rotazione @@ -3983,12 +3983,12 @@ L'angolo finale sarà l'angolo base più questa quantità. Poligono - + Create Polygon (Part) Crea Poligono (Part) - + Create Polygon Crea Poligono @@ -3998,7 +3998,7 @@ L'angolo finale sarà l'angolo base più questa quantità. Clicca ovunque su una linea per dividerla. - + Split line Dividi linea @@ -4008,8 +4008,8 @@ L'angolo finale sarà l'angolo base più questa quantità. Seleziona gli oggetti da tagliare o estendere - + Pick distance Scegliere la distanza @@ -4049,14 +4049,14 @@ L'angolo finale sarà l'angolo base più questa quantità. La Spline è stata chiusa - + Last point has been removed L'ultimo punto è stato rimosso - + Create B-spline B-spline @@ -4218,14 +4218,14 @@ L'angolo finale sarà l'angolo base più questa quantità. Ellisse - - + + Create Ellipse Crea Ellisse - - + + Pick opposite point Selezionare il punto opposto @@ -4318,25 +4318,25 @@ L'angolo finale sarà l'angolo base più questa quantità. Quota - - - - + + + + Create Dimension Crea quota - + Create Dimension (radial) Crea Quota (radiale) - + Edge too short! Bordo troppo corto! - + Edges don't intersect! I bordi non si intersecano! @@ -4366,12 +4366,12 @@ L'angolo finale sarà l'angolo base più questa quantità. Specificare punto finale dello spostamento - + Turning one Rectangle into a Wire Convertire un rettangolo in una polilinea - + Stretch Stira @@ -4381,12 +4381,12 @@ L'angolo finale sarà l'angolo base più questa quantità. Rettangolo - + Create Plane Crea Piano - + Create Rectangle Crea Rettangolo @@ -4401,13 +4401,13 @@ L'angolo finale sarà l'angolo base più questa quantità. Scegliere il punto iniziale della linea specchio - + Mirror Specchio - - + + Pick end point of mirror line Scegliere il punto finale della linea specchio @@ -4417,19 +4417,19 @@ L'angolo finale sarà l'angolo base più questa quantità. Serie su un tracciato attorcigliato - + Select an object to clone Seleziona un oggetto da clonare - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Impossibile clonare oggetto/i senza una forma, annullamento - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Impossibile clonare oggetto/i senza una forma, annullamento @@ -4437,13 +4437,13 @@ L'angolo finale sarà l'angolo base più questa quantità. Cambia pendenza - - + + Select an object to upgrade Selezionare un oggetto da promuovere - + Upgrade Promuovi @@ -4468,7 +4468,7 @@ L'angolo finale sarà l'angolo base più questa quantità. L'offset delle curve di Bézier non è attualmente supportato - + Create 2D view Crea vista 2D @@ -4488,14 +4488,14 @@ L'angolo finale sarà l'angolo base più questa quantità. Ripara - + Downgrade Declassa - - + + Task panel: Pannello attività: @@ -4506,26 +4506,26 @@ L'angolo finale sarà l'angolo base più questa quantità. Serie polare - - + + At least one element must be selected. Almeno un elemento deve essere selezionato. - - + + Selection is not suitable for array. La selezione non è adatta per la Serie. - - - - + + + + Object: Oggetto: @@ -4545,16 +4545,16 @@ L'angolo finale sarà l'angolo base più questa quantità. L'angolo è inferiore a -360 gradi. È impostato su questo valore per procedere. - - + + Fuse: Combina: - - + + Create Link array: Crea una Serie di Link: @@ -4569,8 +4569,8 @@ L'angolo finale sarà l'angolo base più questa quantità. Angolo polare: - + Center of rotation: Centro di rotazione: @@ -4689,17 +4689,17 @@ L'angolo finale sarà l'angolo base più questa quantità. cambiato tipo di proprietà 'Tracking' - + ShapeString: oblique angle must be in the -80 to +80 degree range Forma da testo: l'angolo obliquo deve essere compreso tra -80 e +80 gradi - + ShapeString: string has no wires Forma da testo: la stringa non ha polilinee - + ShapeString: face creation failed for one character ShapeString: creazione della faccia fallita per un carattere @@ -4781,12 +4781,12 @@ L'angolo finale sarà l'angolo base più questa quantità. Two objects are needed. - Two objects are needed. + Sono necessari due elementi. One object is not valid. - One object is not valid. + Un oggetto non è valido. @@ -4826,38 +4826,35 @@ L'angolo finale sarà l'angolo base più questa quantità. Impossibile generare la forma: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Input errato: oggetto base non nel documento. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Input errato: percorso oggetto non nel documento. - - - - - - + + + + + + Wrong input: must be a number. Input errato: deve essere un numero. - - - - + @@ -4867,18 +4864,21 @@ L'angolo finale sarà l'angolo base più questa quantità. - + + + + Wrong input: must be a vector. Ingresso errato: deve essere un vettore. - + Wrong input: must be a list or tuple of strings, or a single string. Input errato: deve essere una lista o tupla di stringhe, o una singola stringa. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Input errato: deve essere 'Original', 'Frenet' o 'Tangent'. @@ -4895,8 +4895,8 @@ L'angolo finale sarà l'angolo base più questa quantità. Input: singolo valore espanso al vettore. - + Wrong input: must be an integer number. Input errato: deve essere un numero intero. @@ -4910,7 +4910,7 @@ L'angolo finale sarà l'angolo base più questa quantità. - + Wrong input: must be a placement, a vector, or a rotation. Input errato: deve essere un posizionamento, un vettore o una rotazione. @@ -4918,22 +4918,22 @@ L'angolo finale sarà l'angolo base più questa quantità. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Input errato: l'oggetto obiettivo non deve essere un elenco. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Input errato: oggetto non nel documento. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Input errato: i sottoelementi devono essere una lista o tupla di stringhe, o una singola stringa. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Input errato: sotto elemento {} non nell'oggetto. @@ -4962,7 +4962,7 @@ L'angolo finale sarà l'angolo base più questa quantità. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Input errato: i punti {} devono essere un elenco di almeno due vettori. @@ -4975,12 +4975,12 @@ L'angolo finale sarà l'angolo base più questa quantità. Input errato: deve essere un elenco di due elementi. Per esempio, [object, 'Edge1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Input errato: oggetto punto non nel documento. - + Wrong input: object has the wrong type. Input errato: l'oggetto ha il tipo sbagliato. @@ -4997,13 +4997,13 @@ L'angolo finale sarà l'angolo base più questa quantità. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Input errato: oggetto bordo non deve essere un elenco o tupla. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Input errato: oggetto bordo non nel documento. @@ -5307,9 +5307,9 @@ L'angolo finale sarà l'angolo base più questa quantità. aggiunta la proprietà di visualizzazione 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' rinominate le opzioni 'DisplayMode' in 'World/Screen' @@ -5496,7 +5496,7 @@ dal menu Strumenti -> Addon Manager Errore: modulo json non trovato. Impossibile salvare lo stile - + Clone Clona @@ -5507,21 +5507,21 @@ dal menu Strumenti -> Addon Manager Pendenza - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction La direzione di Offset non è definita. Si prega di spostare il mouse su entrambi i lati dell'oggetto prima per indicare una direzione - - + + True Vero - - + + False Falso @@ -5831,12 +5831,12 @@ sarà utilizzato per fornire informazioni sull'etichetta. Draft_Wire - + Polyline Polilinea - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Crea una linea per più punti (polilinea). CTRL per l'aggancio, SHIFT per vincolare. @@ -6110,12 +6110,12 @@ Tuttavia, un singolo schizzo con tracce disconnesse sarà convertito in diversi Draft_Move - + Move Sposta - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6141,12 +6141,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arco per 3 punti - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Crea un arco circolare selezionando 3 punti. @@ -6156,12 +6156,12 @@ CTRL per l'aggancio, SHIFT per vincolare. Draft_ArcTools - + Arc tools Strumenti Arco - + Create various types of circular arcs. Crea differenti tipologie di archi circolari. @@ -6209,32 +6209,6 @@ Premi E o ALT+LeftClick per visualizzare il menu contestuale sui nodi supportati e sugli oggetti supportati. - - Draft_AddPoint - - - Add point - Aggiungi punto - - - - Adds a point to an existing Wire or B-spline. - Aggiunge un punto a una Polilinea o B-spline esistenti. - - - - Draft_DelPoint - - - Remove point - Rimuovi punto - - - - Removes a point from an existing Wire or B-spline. - Rimuove un punto da una Polilinea o B-spline esistenti. - - Draft_CircularArray @@ -6727,7 +6701,7 @@ Questa funzione è utile con forme chiuse e solidi e non influisce su polilinee Dimension - Dimensione + Quota @@ -7124,19 +7098,19 @@ imposta 'Vero' se il risultato è una fusione o 'Falso' se è un composto - + Create a face Crea una faccia + + - - The area of this object L'area di questo oggetto @@ -7180,8 +7154,8 @@ imposta 'Vero' se il risultato è una fusione o 'Falso' se è un compostoL'oggetto di base che sarà duplicato. - + The object along which the copies will be distributed. It must contain 'Edges'. L'oggetto lungo il quale le copie saranno distribuite. Deve contenere 'Bordi'. @@ -7196,9 +7170,9 @@ imposta 'Vero' se il risultato è una fusione o 'Falso' se è un compostoRotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Mostra i singoli elementi della serie (solo per le serie di link) @@ -7325,8 +7299,8 @@ Quando si utilizza uno stile salvato, alcune delle proprietà della vista divent saranno modificabili solo cambiando lo stile attraverso lo strumento 'Modifica stile di annotazione'. - + The base object that will be duplicated L'oggetto base che verrà duplicato @@ -8124,14 +8098,14 @@ Lasciare vuoto per il sistema predefinito. Usare 'arch' per forzare la notazione dell'arco statunitense - + Arrow size Dimensione freccia - + Arrow type Tipo di freccia @@ -8194,7 +8168,7 @@ beyond the dimension line Draft - Pescaggio + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 7e735f8373..eb82f05ebf 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 07f49f3cd6..84c6b99b27 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -1542,7 +1542,6 @@ pattern definitions to be added to the standard patterns フォントサイズ - @@ -1550,6 +1549,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1650,8 +1650,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1973,9 +1973,9 @@ from the Addon Manager. DXF ライブラリの自動的なダウンロードと更新を FreeCAD に許可 - - + + Import options インポート・オプション @@ -2189,8 +2189,8 @@ If it is set to '0' the whole spline is treated as a straight segment. '0' に設定すると、スプライン全体が直線セグメントとして扱われます。 - + Export options エクスポート・オプション @@ -2467,8 +2467,8 @@ These lines are thicker than normal grid lines. FreeCAD が DWG ファイルを DXF へ変換するために使う方法です。「自動」が選択された場合、FreeCAD は以下のコンバーターを表示順に従って検索します。FreeCAD がコンバーターを見つけられなかった場合、特定のコンバーターを選んで、以下で指定する必要があります。LibreDWG を使用する場合は「dwg2dxf」、ODA ファイルコンバーターを使用する場合は「ODAFileConverter」、QCAD pro 版を使用する場合は「dwg2dwg」を選択してください。 - + Automatic 自動 @@ -2763,8 +2763,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3173,7 +3173,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate 回転 @@ -3196,7 +3196,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset オフセット @@ -3389,59 +3389,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3549,65 +3549,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3632,54 +3632,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move 移動 - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3690,75 +3690,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3768,7 +3768,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3783,17 +3783,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3823,13 +3823,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3845,31 +3845,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation 回転 - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3877,7 +3877,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3982,12 +3982,12 @@ The final angle will be the base angle plus this amount. 多角形 - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -3997,7 +3997,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4007,8 +4007,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4048,14 +4048,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline B-スプラインを作成 @@ -4217,14 +4217,14 @@ The final angle will be the base angle plus this amount. 楕円 - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4317,25 +4317,25 @@ The final angle will be the base angle plus this amount. 寸法 - - - - + + + + Create Dimension 寸法を作成 - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4365,12 +4365,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4380,12 +4380,12 @@ The final angle will be the base angle plus this amount. 四角形 - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4400,13 +4400,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4416,17 +4416,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4436,13 +4436,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4467,7 +4467,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4487,14 +4487,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4505,26 +4505,26 @@ The final angle will be the base angle plus this amount. 軸周整列 - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4544,16 +4544,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4568,8 +4568,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4688,17 +4688,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4825,38 +4825,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4866,18 +4863,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4894,8 +4894,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4909,7 +4909,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4974,12 +4974,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5306,9 +5306,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5495,7 +5495,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone クローン @@ -5506,21 +5506,21 @@ from menu Tools -> Addon Manager 傾斜 - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True True - - + + False False @@ -5830,12 +5830,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6109,12 +6109,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move 移動 - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6141,12 +6141,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6156,12 +6156,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6209,32 +6209,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7126,19 +7100,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7182,8 +7156,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7198,9 +7172,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7329,8 +7303,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8133,14 +8107,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size 矢印のサイズ - + Arrow type 矢印のタイプ diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.qm b/src/Mod/Draft/Resources/translations/Draft_ka.qm index 0710db0c5e..f154ca018d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ka.qm and b/src/Mod/Draft/Resources/translations/Draft_ka.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index 4eba12bc0c..909db819cd 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -555,8 +555,8 @@ Negative values will result in copies produced in the negative direction. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - თუ ჩართულია, მოხდება მასივში მიღებული ობიექტების შერწყმა, თუ ისინი ერთმანეთს ეხებიან. -მუშაობს მხოლოდ მაშინ, თუ "ბმულის მასივი" გამორთულია. + თუ ჩართულია, მიღებული ობიექტები მასივში შეერთდება, თუ ისინი ერთმანეთს ეხებიან. +ეს მხოლოდ მაშინ მუშაობს, თუ "მასივების მიბმა" გამორთულია. @@ -573,7 +573,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Link array - ბმულების მასივი + მასივების მიბმა @@ -652,13 +652,13 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - თუ ჩართულია, მიღებული ობიექტები მასივში შეერთდება, თუ ისინი ერთმანეთს ეხებიან. -ეს მხოლოდ მაშინ მუშაობს, თუ "მასივების მიბმა" გამორთულია. + თუ ჩართულია, მოხდება მასივში მიღებული ობიექტების შერწყმა, თუ ისინი ერთმანეთს ეხებიან. +მუშაობს მხოლოდ მაშინ, თუ "ბმულის მასივი" გამორთულია. Fuse - შერწყმა + შეერთება @@ -670,7 +670,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f Link array - მასივების მიბმა + ბმულების მასივი @@ -962,7 +962,7 @@ value by using the [ and ] keys while drawing px - px + პქს @@ -1058,7 +1058,7 @@ value by using the [ and ] keys while drawing Text spacing - სიმბოლოებს შორის დაშორება + ტექსტში დაშორებები @@ -1549,7 +1549,6 @@ pattern definitions to be added to the standard patterns ფონტის ზომა - @@ -1557,6 +1556,7 @@ pattern definitions to be added to the standard patterns + mm მმ @@ -1657,8 +1657,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.ნაგულისხმევი ხაზის სიგანე - + px px @@ -1803,7 +1803,7 @@ used for linear dimensions. Text spacing - ტექსტში დაშორებები + სიმბოლოებს შორის დაშორება @@ -1978,9 +1978,9 @@ from the Addon Manager. FreeCAD-სთვის DXF ბიბლიოთეკების ავტომატური გადმოწერის და განახლების უფლების მიცემა - - + + Import options შემოტანის მორგება @@ -2197,8 +2197,8 @@ If it is set to '0' the whole spline is treated as a straight segment. თუ დაყენებულია '0', მთელი სპლაინი განიხილება, როგორც სწორი სეგმენტი. - + Export options გატანის მორგება @@ -2474,8 +2474,8 @@ These lines are thicker than normal grid lines. მეთოდი, რომელსაც FreeCAD-ი DWG ფაილების DXF-ში გადასაყვანად გამოიყენებს. თუ არჩეულია "ავტომატური", FreeCAD-ი შეეცდება იპოვოს ერთ-ერთი გადამყვანებიდან, იმ თანამიმდევრობით, როგორც ისინი აქაა ჩამოთვლილი. თუ FreeCAD-ი ვერ იპოვის ვერცერთს, მაშინ საჭიროა, რომ თქვენ დააყენოთ გადამყვანი და მიუთითოთ ბილიკი მის გამშვებ ფაილებამდე. აირჩიეთ "dwg2dxf", თუ იყენებთ LibreDWG-ს, "ODAFileConverter", თუ ODA-ის ფაილებს გარდამქმნელს იყენებთ და "dwg2dwg", თუ QCAD-ის პროფესიონალურ ვერსიას. - + Automatic ავტომატური @@ -2770,8 +2770,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3072,7 +3072,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Undo - დაბრუნება (&U) + დაბრუნება @@ -3179,7 +3179,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate შემობრუნება @@ -3202,7 +3202,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset წანაცვლება @@ -3392,59 +3392,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer დააყენეთ მასშტაბი, რომელიც გამოიყენება მონახაზის ანოტაციის ხელსაწყოების მიერ - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. აქტიური დოკუმენტის გარეშე. გაუქმება. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + არასწორი შეყვანა: ობიექტი {} დოკუმენტში არაა. - + Unable to insert new object into a scaled part მასშტაბირებად ნაწილში ახალი ობიექტის ჩასმა შეუძლებელია - + Symbol not implemented. Using a default symbol. სიმბოლო განხორციელებული არაა. გამოიყენება ნაგულისხმევი სიმბოლო. - + image is Null ნულოვანი გამოსახულება - + filename does not exist on the system or in the resource file ფაილი არ არსებობს არც სისტემაში არც რესურსის ფაილში - + unable to load texture ტექსტურის ჩატვირთვის შეცდომა - + Does not have 'ViewObject.RootNode'. არ აქვს 'ViewObject.RootNode'. @@ -3517,7 +3517,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: unknown document {} - Wrong input: unknown document {} + არასწორი შეყვანა: უცნობი დოკუმენტი {} @@ -3552,65 +3552,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer აირჩიეთ სამიზნე წერტილი - + Create Label ჭდის შექმნა - - + + Pick endpoint of leader line აირჩიეთ ლიდერის ხაზის ბოლო წერტილი - - + + Pick text position აირჩიეთ ტექსტის პოზიცია - - - + + + Pick first point აირჩიეთ პირველი წერტილი - + Create Line ხაზის შექმნა - + Create Wire პოლიხაზის შექმნა - + Polyline პოლიხაზი - - - - - - - + + + + + + + Pick next point აირჩიეთ შემდეგი წერტილი - + Unable to create a Wire from selected objects მონიშნული ობიექტებისგან პოლიხაზის შექმნა შეუძლებელია - + Convert to Wire პოლიხაზად გარდაქმნა @@ -3635,54 +3635,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer აირჩიეთ მდებარეობის წერტილი - + Create Text ტექსტის შექმნა - + Select an object to convert. აირჩიეთ გარდასაქმნელი ობიექტი. - + Convert to Sketch ესკიზად გარდაქმნა - + Convert to Draft მონახაზად გარდაქმნა - + Convert Draft/Sketch მონახაზად/ესკიზად გარდაქმნა - + Select an object to move აირჩიეთ გადასატანი ობიექტი - + Pick start point აირჩიეთ საწყისი წერტილი - - + + Pick end point აირჩიეთ საბოლოო წერტილი - + Move გადატანა - - + + Some subelements could not be moved. ზოგიერთი ქვეელემენტის გადატანა შეუძლებელია. @@ -3693,77 +3693,77 @@ https://github.com/yorikvanhavre/Draft-dxf-importer აირჩიეთ ცენტრის წერტილი - - - + + + - + Pick radius აირჩიეთ რადიუსი - - - + + + Start angle საწყისი კუთხე - - + + Pick start angle აირჩიეთ საწყისი კუთხე - - - + + + Aperture angle დიაფრაგმის კუთხე - + Pick aperture აირჩიეთ დიაფრაგმა - + Create Circle (Part) წრეწირის შექმნა (ნაწილი) - + Create Circle წრის შექმნა - + Create Arc (Part) რკალის შექმნა (ნაწილი) - + Create Arc რკალის შექმნა - + Pick aperture angle აირჩიეთ აპერტურის კუთხე - - + + Arc by 3 points რკალი 3 წერტილით - + Create Arc by 3 points - Create Arc by 3 points + რკალის სამი წერტილით შექმნა @@ -3771,7 +3771,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer ბადის ჩართ/გამორთ - + Select an object to edit აირჩიეთ ჩასასწორებელი ობიექტი @@ -3786,17 +3786,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer კვანძის ჩასწორება - + No edit point found for selected object მონიშნული ელემენტის ჩასწორების წერტილი ნაპოვნი არაა - + Too many objects selected, max number set to: მონიშნულია მეტისმეტად ბევრი ობიექტი. მაქს. შესაძლო რაოდენობა: - + : this object is not editable : ეს ობიექტი ჩასწორებადი არაა @@ -3826,13 +3826,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer სტილის ფაილის შენახვა - + Select an object to project აირჩიეთ ობიექტი პროექციისთვის - - + + Create Point წერტილის შექმნა @@ -3848,31 +3848,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle ბაზისური კუთხე - + The base angle you wish to start the rotation from შებრუნების თქვენთვის სასურველი საწყისი საბაზისო კუთხე - + Pick base angle აირჩიეთ საბაზისო კუთხე - + Rotation შემობრუნება - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. შებრუნებების რაოდენობა, რომლის შესრულებაც გსურთ. @@ -3880,7 +3880,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle აირჩიეთ ბრუნვის კუთხე @@ -3985,12 +3985,12 @@ The final angle will be the base angle plus this amount. მრავალკუთხედი - + Create Polygon (Part) მრავალკუთხას შექმნა (ნაწილი) - + Create Polygon პოლიგონის შექმნა @@ -4000,7 +4000,7 @@ The final angle will be the base angle plus this amount. ხაზის გასაყოფად ზედ დააწკაპუნეთ. - + Split line ხაზის გაყოფა @@ -4010,8 +4010,8 @@ The final angle will be the base angle plus this amount. აირჩიეთ გასაფართოებელი ან შესავიწროებელი ობიექტები - + Pick distance აირჩიეთ დაშორება @@ -4051,14 +4051,14 @@ The final angle will be the base angle plus this amount. სპლაინი დაიხურა - + Last point has been removed ბოლო წერტილი მოცილებულია - + Create B-spline B-სპლაინის შექმნა @@ -4220,14 +4220,14 @@ The final angle will be the base angle plus this amount. ოვალი - - + + Create Ellipse ოვალის შექმნა - - + + Pick opposite point აირჩიეთ საპირისპირო წერტილი @@ -4320,25 +4320,25 @@ The final angle will be the base angle plus this amount. განზომილება - - - - + + + + Create Dimension განზომილების შექმნა - + Create Dimension (radial) ზომის შექმნა (რადიალური) - + Edge too short! წიბო ძალიან მოკლეა! - + Edges don't intersect! წიბოები არ იკვეთებიან! @@ -4368,12 +4368,12 @@ The final angle will be the base angle plus this amount. აირჩიეთ გადაადგილების საბოლოო წერტილი - + Turning one Rectangle into a Wire ერთი მართკუთხედის პოლიხაზად გარდაქმნა - + Stretch გაწელვა @@ -4383,12 +4383,12 @@ The final angle will be the base angle plus this amount. მართკუთხედი - + Create Plane სიბრტყის შექმნა - + Create Rectangle ოთხკუთხედის შექმნა @@ -4403,13 +4403,13 @@ The final angle will be the base angle plus this amount. აირჩიეთ ასლის ხაზის საწყისი წერტილი - + Mirror სარკე - - + + Pick end point of mirror line აირჩიეთ ასლის ხაზის ბოლო წერტილი @@ -4419,19 +4419,19 @@ The final angle will be the base angle plus this amount. ჩახვეული ტრაექტორიების მასივი - + Select an object to clone აირჩიეთ ობიექტი კლონირებისთვის - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + მოხაზულობის არმქონე ობიექტების დაკლონვა შეუძლებელია. ოპერაცია ავარიულად დასრულდება - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + მოხაზულობის არმქონე ობიექტების დაკლონვა შეუძლებელია. ისინი გამოტოვებული იქნება @@ -4439,13 +4439,13 @@ The final angle will be the base angle plus this amount. დახრილობის შეცვლა - - + + Select an object to upgrade აირჩიეთ ობიექტი განახლებისთვის - + Upgrade გართულება @@ -4470,7 +4470,7 @@ The final angle will be the base angle plus this amount. ბეზიეს მრუდების წანაცვლების მხარდაჭერა ჯერ არ არსებობს - + Create 2D view 2D ხედის შექმნა @@ -4490,14 +4490,14 @@ The final angle will be the base angle plus this amount. წამლობა - + Downgrade დაქვეითება - - + + Task panel: ამოცანების ზოლი: @@ -4508,26 +4508,26 @@ The final angle will be the base angle plus this amount. პოლარული მასივი - - + + At least one element must be selected. არჩეული უნდა იყოს მინიმუმ ერთი ელემენტი. - - + + Selection is not suitable for array. მონიშნული მასივის მოთხოვნებს არ შეესაბამება. - - - - + + + + Object: ობიექტი: @@ -4547,16 +4547,16 @@ The final angle will be the base angle plus this amount. კუთხე არის -360 გრადუსზე დაბლა. გასაგრძელებლად დაყენებულია ამ მნიშვნელობაზე. - - + + Fuse: შერწყმა: - - + + Create Link array: ბმულების მასივის შექმნა: @@ -4571,8 +4571,8 @@ The final angle will be the base angle plus this amount. პოლარული ბიჯი: - + Center of rotation: შებრუნების ცენტრი: @@ -4691,17 +4691,17 @@ The final angle will be the base angle plus this amount. თვისების ტიპი 'ტრეკინგი' შეიცვალა - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: დახრის კუთხე -80 - +80 შუალედიდან უნდა იყოს - + ShapeString: string has no wires ShapeString: სტრიქონს პოლიხაზები არ გააჩნია - + ShapeString: face creation failed for one character ShapeString: ზედაპირის შექმნის შეცდომა ერთი სიმბოლოსთვის @@ -4783,12 +4783,12 @@ The final angle will be the base angle plus this amount. Two objects are needed. - Two objects are needed. + საჭიროა ორი ობიექტი. One object is not valid. - One object is not valid. + ერთი ობიექტი არასწორია. @@ -4828,38 +4828,35 @@ The final angle will be the base angle plus this amount. მოხაზულობის გენერაცია შეუძლებელია: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + არასწორი შეყვანა: საბაზისო ობიექტი დოკუმენტში არაა. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + არასწორი შეყვანა: ობიექტის ბილიკი დოკუმენტში არაა. - - - - - - + + + + + + Wrong input: must be a number. არასწორი შეყვანა: უნდა იყოს რიცხვი. - - - - + @@ -4869,18 +4866,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. არასწორი შეყვანა: უნდა იყოს ვექტორი. - + Wrong input: must be a list or tuple of strings, or a single string. არასწორი შეყვანა: უნდა იყოს სტრიქონების სტრუქტურა ან ერთი სტრიქონი. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. არასწორი შეყვანა: უნდა იყოს 'საწყისი', 'ფრენე' ან 'მხები'. @@ -4897,8 +4897,8 @@ The final angle will be the base angle plus this amount. შეტანა: ერთი მნიშვნელობა, ვექტორამდე გაზრდილი. - + Wrong input: must be an integer number. არასწორი შეყვანა: უნდა იყოს მთელი რიცხვი. @@ -4912,7 +4912,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. არასწორი შეყვანა: უნდა იყოს მდებარეობა, ვექტორი ან ბრუნვა. @@ -4920,22 +4920,22 @@ The final angle will be the base angle plus this amount. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + არასწორი შეყვანა: სამიზნე ობიექტი სია არ უნდა იყოს. Wrong input: target_object not in document. - Wrong input: target_object not in document. + არასწორი შეყვანა: სამიზნე ობიექტი დოკუმენტში არაა. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + არასწორი შეყვანა: ქვეელემენტები, ან სტრიქონების კორტეჟის სია უნდა იყოს, ან ერთი სტრიქონი. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + არასწორი შეყვანა: ქვეელემენტი {} ობიეტში არაა. @@ -4964,7 +4964,7 @@ The final angle will be the base angle plus this amount. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + არასწორი შეყვანა: წერტილები {} უნდა იყოს მინიმუმ ორი ვექტორისგან შედგენილი სია. @@ -4977,12 +4977,12 @@ The final angle will be the base angle plus this amount. არასწორი შეყვანა: უნდა იყოს ორი ელემენტის სია. მაგალითად, [object, 'Edge1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + არასწორი შეყვანა: წერტილის ბილიკი დოკუმენტში არაა. - + Wrong input: object has the wrong type. არასწორი შეყვანა: ობიექტის ტიპი არასწორია. @@ -4999,13 +4999,13 @@ The final angle will be the base angle plus this amount. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + არასწორი შეყვანა: წიბოს ობიექტი სია ან კორტეჟი არ უნდა იყოს. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + არასწორი შეყვანა: წიბოს ობიექტი დოკუმენტში არაა. @@ -5309,9 +5309,9 @@ The final angle will be the base angle plus this amount. თვისება 'TextColor' დამატებულია - - + + renamed 'DisplayMode' options to 'World/Screen' სახელი გადაერქვა პარამეტრს 'DisplayMode'-დან 'World/Screen'-ზე @@ -5498,7 +5498,7 @@ from menu Tools -> Addon Manager შეცდომა: json მოდული ვერ მოიძებნა. სტილის შენახვა შეუძლებელია - + Clone კლონი @@ -5509,21 +5509,21 @@ from menu Tools -> Addon Manager დახრა - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction წანაცვლების მიმართულება აღწერილი არაა. მის მისათითებლად თაგუნა ობიექტის რომელიმე მხარეს, საჭირო მიმართულებით გაამოძრავეთ - - + + True ჭეშმარიტი - - + + False მცდარი @@ -5833,12 +5833,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline პოლიხაზი - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. მრავალ წერტილზე გამავალი ხაზის (პოლიხაზის) შექმნა. CTRL მისამაგრებლად, SHIFT შესაზღუდად. @@ -6112,12 +6112,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move გადატანა - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6144,12 +6144,12 @@ CTRL მისაბმელად, SHIFT შესაზღუდად. Draft_Arc_3Points - + Arc by 3 points რკალი 3 წერტილით - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. ქმნის წრიულ რკალს 3 წერტილის არჩევით. @@ -6159,12 +6159,12 @@ CTRL მისაბმელად, SHIFT შესაზღუდად. Draft_ArcTools - + Arc tools რკალის ხელსაწყოები - + Create various types of circular arcs. სხვადასხვა ტიპის მრგვალი რკალების შექმნა. @@ -6212,32 +6212,6 @@ on supported nodes and on supported objects. მენიუს გასახსნელად დააჭირეთ E-ს ან Alt+მარცხენაწკაპი. - - Draft_AddPoint - - - Add point - წერტილის დამატება - - - - Adds a point to an existing Wire or B-spline. - არსებულ პოლიხაზზე ან B-სპლაინზე წერტილის დამატება. - - - - Draft_DelPoint - - - Remove point - წერტილის მოცილება - - - - Removes a point from an existing Wire or B-spline. - არსებული პოლიხაზიდან ან B-სპლაინიდან წერტილის წაშლა. - - Draft_CircularArray @@ -6421,7 +6395,7 @@ If other objects are selected they are ignored. Fillet - მომრგვალება + მომრგვალებული ნაზოლი @@ -6624,7 +6598,7 @@ The array can be turned into a polar or a circular array by changing its type. Scale - მასშტაბირება + მასშტაბი @@ -6729,7 +6703,7 @@ This is intended to be used with closed shapes and solids, and doesn't affect op Dimension - ზომა + განზომილება @@ -6781,7 +6755,7 @@ then draw a line to specify the distance and direction of stretching. Rectangle - ოთხკუთხედი + მართკუთხედი @@ -7126,19 +7100,19 @@ set True for fusion or False for compound - + Create a face ზედაპირის შექმნა + + - - The area of this object ობიექტის ფართობი @@ -7182,8 +7156,8 @@ set True for fusion or False for compound საბაზისო ობიექტი, რომელიც გაორმაგდება. - + The object along which the copies will be distributed. It must contain 'Edges'. ობიექტი, რომლს გასწვრივაც გადანაწილდება ასლები. ის აუცილებლად უნდა შეიცავდეს „წიბოებს“. @@ -7198,9 +7172,9 @@ set True for fusion or False for compound გრეხილი მასივის ბრუნვის ფაქტორი. - - + + Show the individual array elements (only for Link arrays) მასივის ელემენტების ჩვენება (მხოლოდ ბმულების მასივებისთვის) @@ -7327,8 +7301,8 @@ they will only be editable by changing the style through the 'Annotation style e მათი რედაქტირება შესაძლებელია მხოლოდ სტილის შეცვლით "ანოტაციის სტილის რედაქტორის" ხელსაწყოს მეშვეობით. - + The base object that will be duplicated საბაზისო ობიექტი, რომელიც გაორმაგდება @@ -8126,14 +8100,14 @@ Use 'arch' to force US arch notation გამოიყენეთ „არქიტექტურა“ აშშ-ის არქიტექტურული ნოტაციისთვის - + Arrow size ისრის ზომა - + Arrow type ისრის ტიპი @@ -8198,7 +8172,7 @@ beyond the dimension line Draft - წყალშიგი + მონახაზი diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index 9db3cb1110..988bf57e2d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index ccdaf2a25f..ad4d593cc4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -1544,7 +1544,6 @@ pattern definitions to be added to the standard patterns 폰트 크기 - @@ -1552,6 +1551,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1652,8 +1652,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1975,9 +1975,9 @@ from the Addon Manager. Allow FreeCAD to automatically download and update the DXF libraries - - + + Import options 가져오기 옵션 @@ -2195,8 +2195,8 @@ If it is set to '0' the whole spline is treated as a straight segment. '0'으로 설정하면 전체 스플라인이 직선 세그먼트로 처리됩니다. - + Export options 내보내기 옵션 @@ -2473,8 +2473,8 @@ These lines are thicker than normal grid lines. 이것은 FreeCAD가 DWG 파일을 DXF로 변환하는 데 사용하는 방법입니다. "자동"을 선택하면 FreeCAD는 여기에 표시된 것과 동일한 순서로 다음 변환기 중 하나를 찾으려고 시도합니다. FreeCAD가 변환기를 찾을 수 없는 경우, 특정 변환기를 선택하고 아래에 해당 경로를 표시해야 할 수 있습니다. LibreDWG를 사용하는 경우 "dwg2dxf" 유틸리티를, ODA 파일 변환기를 사용하는 경우 "ODAFileConverter"를, QCAD의 프로 버전을 사용하는 경우 "dwg2dwg" 유틸리티를 선택합니다. - + Automatic Automatic @@ -2769,8 +2769,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3179,7 +3179,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate 회전하기 @@ -3202,7 +3202,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset 오프셋 @@ -3395,59 +3395,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3555,65 +3555,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3638,54 +3638,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move 이동 - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3696,75 +3696,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3774,7 +3774,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3789,17 +3789,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3829,13 +3829,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3851,31 +3851,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3883,7 +3883,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3988,12 +3988,12 @@ The final angle will be the base angle plus this amount. 다각형 - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4003,7 +4003,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4013,8 +4013,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4054,14 +4054,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline 생성: B-spline @@ -4223,14 +4223,14 @@ The final angle will be the base angle plus this amount. 타원 - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4323,25 +4323,25 @@ The final angle will be the base angle plus this amount. 치수 - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4371,12 +4371,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4386,12 +4386,12 @@ The final angle will be the base angle plus this amount. 사각형 - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4406,13 +4406,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4422,17 +4422,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4442,13 +4442,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4473,7 +4473,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4493,14 +4493,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4511,26 +4511,26 @@ The final angle will be the base angle plus this amount. 극 배열 - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4550,16 +4550,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4574,8 +4574,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4694,17 +4694,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4831,38 +4831,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4872,18 +4869,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4900,8 +4900,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4915,7 +4915,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4980,12 +4980,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5312,9 +5312,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5501,7 +5501,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone 복제 @@ -5512,21 +5512,21 @@ from menu Tools -> Addon Manager Slope - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True 참 - - + + False 거짓 @@ -5836,12 +5836,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6115,12 +6115,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move 이동 - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6147,12 +6147,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6162,12 +6162,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6215,32 +6215,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7132,19 +7106,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7188,8 +7162,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7204,9 +7178,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7335,8 +7309,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8139,14 +8113,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size 화살표 크기 - + Arrow type 화살표 유형 diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index 5b6fb1e3d3..2f9b26bead 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 7e22563bd0..80a3442c0d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -840,12 +840,12 @@ van de knoppen hierboven wordt geklikt Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. - Or select a single vertex to move the current working plane without changing its orientation. Then press the button below. + Of selecteer een individueel hoekpunt om het huidige werkvlak te verplaatsen zonder de oriëntatie aan te passen. Druk dan op de onderstaande knop. Resets the working plane to its next position - Resets the working plane to its next position + Verstel het werkvlak naar zijn volgende positie @@ -1009,12 +1009,12 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen Fill the values below from a stored style preset - Fill the values below from a stored style preset + Vul de onderstaande waardes in vanaf een opgeslagen stijl voorinstelling Save the current style as a preset... - Save the current style as a preset... + Sla de huidige stijl op als een voorinstelling... @@ -1024,12 +1024,12 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen Point color - Point color + Puntkleur Point size - Point size + Puntgrootte @@ -1100,27 +1100,27 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen If checked, a unit symbol is added to dimension texts - If checked, a unit symbol is added to dimension texts + Voegt een eenheid symbool toe aan dimensie teksten wanneer aangevinkt The unit override for dimensions. Leave blank to use the current FreeCAD unit. - The unit override for dimensions. Leave blank to use the current FreeCAD unit. + Overschrijf de dimensie eenheden. Laat open om de huidige FreeCAD eenheid te gebruiken. Ext lines - Ext lines + Ext lijnen The distance the dimension line is extended past the extension lines - The distance the dimension line is extended past the extension lines + De afstand waarover de maatlijn verlengd wordt voorbij de verlengingslijnen The color for texts, dimension texts and label texts - The color for texts, dimension texts and label texts + De kleur voor teksten, maat teksten en labels @@ -1130,7 +1130,7 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen The font for texts, dimensions and labels - The font for texts, dimensions and labels + Het lettertype voor teksten, afmetingen en labels @@ -1140,7 +1140,7 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen The height for texts, dimension texts and label texts - The height for texts, dimension texts and label texts + De hoogte voor teksten, afmetingsteksten en label teksten @@ -1156,8 +1156,7 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenen The annotation scale multiplier is the inverse of the scale set in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The annotation scale multiplier is the inverse of the scale set in the -Annotation scale widget. If the scale is 1:100 the multiplier is 100. + De annotatie schaal vermenigvuldiger is de inverse van de schaal instelling van de Annotatie schaal widget. Bij een schaal 1:100 wordt de vermenigvuldiger 100. @@ -1180,15 +1179,12 @@ Annotation scale widget. If the scale is 1:100 the multiplier is 100. - The length of extension lines. Use 0 for full extension lines. A negative value -defines the gap between the ends of the extension lines and the measured points. -A positive value defines the maximum length of the extension lines. Only used -for linear dimensions. + De lengte van de hulplijnen. Gebruik 0 voor volle hulplijnen. Een negatieve waarde bepaalt de opening tussen de uiteindes van de hulplijnen en de gemeten punten. Een positieve waarde bepaalt de maximale lengte van de hulplijnen. Wordt enkel gebruikt voor lineaire afmetingen. The length of extension lines above the dimension line - The length of extension lines above the dimension line + De lengte van de hulplijnen boven de afmetingslijn @@ -1198,12 +1194,12 @@ for linear dimensions. Apply the above style to selected object(s) - Apply the above style to selected object(s) + Pas de bovenstaande stijl toe op de geselecteerde object(en) Apply the above style to all annotations (texts, dimensions and labels) - Apply the above style to all annotations (texts, dimensions and labels) + Pas de bovenstaande stijl toe op alle annotaties (teksten, afmetingen en labels) @@ -1213,12 +1209,12 @@ for linear dimensions. Dim overshoot - Dim overshoot + Doorschieting van de afmeting Ext overshoot - Ext overshoot + @@ -1243,7 +1239,7 @@ for linear dimensions. Pattern files (*.pat *.PAT) - Pattern files (*.pat *.PAT) + Patroon bestanden (*.pat *.PAT) @@ -1278,8 +1274,8 @@ for linear dimensions. The number of decimals used in internal coordinate operations (for example 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off. - The number of decimals used in internal coordinate operations (for example 3 = 0.001). -Values between 6 and 8 are usually considered the best trade-off. + Het aantal decimalen gebruikt voor interne operaties met coördinaten (bijvoorbeeld 3 = 0.001). +Waarden tussen 6 en 8 zijn typisch een goed compromis. @@ -1287,10 +1283,7 @@ Values between 6 and 8 are usually considered the best trade-off. will automatically align with the current view whenever a command is started. Additionally it will align to preselected planar faces, or when points on planar faces are picked during commands. - The default working plane for new views. If set to "Automatic" the working plane -will automatically align with the current view whenever a command is started. -Additionally it will align to preselected planar faces, or when points on planar -faces are picked during commands. + Het standaard werkvlak voor nieuwe weergaves. Wanneer ingesteld op "Automatisch", zal het werkvlak automatisch uitlijnen met de huidige weergave bij elk begonnen opdracht. Bovendien wordt het uitgelijnd met vooraf geselecteerde vlakke vlakken, of wanneer punten op vlakke vlakken worden gekozen tijdens opdrachten. @@ -1311,20 +1304,18 @@ faces are picked during commands. If checked, a widget indicating the current working plane orientation appears when picking points - If checked, a widget indicating the current working -plane orientation appears when picking points + Toont, wanneer aangevinkt, een widget die de oriëntatie van het huidige werkvlak aanduidt gedurende het kiezen van punten Show working plane tracker - Show working plane tracker + Toon werkvlak tracker If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. - If checked, the layers drop-down list also includes groups. -Objects can then automatically be added to groups as well. + Wanneer aangevinkt bevat de drop-down lijst voor lagen ook groepen. Objecten kunnen dan ook automatisch toegevoegd worden aan groepen. @@ -1546,7 +1537,6 @@ pattern definitions to be added to the standard patterns Lettergrootte - @@ -1554,6 +1544,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1654,8 +1645,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1977,9 +1968,9 @@ te installeren vanuit de Uitbreidingsmanager. Sta FreeCAD toe om de DXF-bibliotheken automatisch te downloaden en bij te werken - - + + Import options Importeeropties @@ -2121,7 +2112,7 @@ Otherwise default colors will be applied. Use colors from the DXF file - Use colors from the DXF file + Gebruik de kleuren uit het DXF bestand @@ -2197,8 +2188,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Als het is ingesteld op '0' wordt de hele spline behandeld als een recht segment. - + Export options Exportopties @@ -2244,7 +2235,7 @@ This might fail for post DXF R12 templates. Snap modifier - Snap modifier + @@ -2475,8 +2466,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automatisch @@ -2771,8 +2762,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3181,7 +3172,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Draaien @@ -3204,7 +3195,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Verschuiving @@ -3395,59 +3386,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3555,65 +3546,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Label maken - - + + Pick endpoint of leader line Kies het eindpunt van de leiderslijn - - + + Pick text position Kies tekstpositie - - - + + + Pick first point Kies het eerste punt - + Create Line Maak Nieuwe Lijn - + Create Wire Draad aanmaken - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Kies het volgende punt - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3638,54 +3629,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Kies locatiepunt - + Create Text Tekst maken - + Select an object to convert. Selecteer een object om te converteren. - + Convert to Sketch Converteren naar schets - + Convert to Draft Converteren naar ontwerp - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Selecteer een object om te verplaatsen - + Pick start point Kies startpunt - - + + Pick end point Kies eindpunt - + Move Verplaatsen - - + + Some subelements could not be moved. Sommige subelementen konden niet verplaatst worden. @@ -3696,75 +3687,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Kies middelpunt - - - + + + - + Pick radius Kies straal - - - + + + Start angle Starthoek - - + + Pick start angle Kies starthoek - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Maak cirkel (Onderdeel) - + Create Circle Maak Cirkel - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3774,7 +3765,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3789,17 +3780,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3829,13 +3820,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3851,31 +3842,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotatie - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3883,7 +3874,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3988,12 +3979,12 @@ The final angle will be the base angle plus this amount. Veelhoek - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Polygoon maken @@ -4003,7 +3994,7 @@ The final angle will be the base angle plus this amount. Klik ergens op een lijn om deze te splitsen. - + Split line Lijn splitsen @@ -4013,8 +4004,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Kies afstand @@ -4054,14 +4045,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Maak B-spline aan @@ -4223,14 +4214,14 @@ The final angle will be the base angle plus this amount. Ellips - - + + Create Ellipse Ellips aanmaken - - + + Pick opposite point Kies een tegenovergesteld punt @@ -4323,25 +4314,25 @@ The final angle will be the base angle plus this amount. Afmeting - - - - + + + + Create Dimension Dimensie maken - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4371,12 +4362,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4386,12 +4377,12 @@ The final angle will be the base angle plus this amount. Rechthoek - + Create Plane Create Plane - + Create Rectangle Rechthoek maken @@ -4406,13 +4397,13 @@ The final angle will be the base angle plus this amount. Kies het beginpunt van de spiegellijn - + Mirror Mirror - - + + Pick end point of mirror line Kies het eindpunt van de spiegellijn @@ -4422,17 +4413,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Selecteer een object om te klonen - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4442,13 +4433,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Selecteer een object om te upgraden - + Upgrade Upgrade @@ -4473,7 +4464,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view 2D-weergave maken @@ -4493,14 +4484,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Taakpaneel: @@ -4511,26 +4502,26 @@ The final angle will be the base angle plus this amount. Polair matrix - - + + At least one element must be selected. Ten minste één element moet worden geselecteerd. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4550,16 +4541,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Samenvoegen: - - + + Create Link array: Create Link array: @@ -4574,8 +4565,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4694,17 +4685,17 @@ The final angle will be the base angle plus this amount. type van eigenschap "Volgen" is gewijzigd - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4831,38 +4822,35 @@ The final angle will be the base angle plus this amount. Kan geen vorm genereren: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Verkeerde invoer: moet een getal zijn. - - - - + @@ -4872,18 +4860,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4900,8 +4891,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4915,7 +4906,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4980,12 +4971,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5312,9 +5303,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5501,7 +5492,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Kopieer @@ -5512,21 +5503,21 @@ from menu Tools -> Addon Manager Helling - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Waar - - + + False Onwaar @@ -5836,12 +5827,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6115,12 +6106,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Verplaatsen - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6147,12 +6138,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6162,12 +6153,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6215,32 +6206,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Punt toevoegen - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -6898,7 +6863,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Upgrade - Upgrade + Upgraden @@ -6985,7 +6950,7 @@ otherwise it will try to heal all objects in the active document. Downgrade - Downgrade + Downgraden @@ -7132,19 +7097,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7188,8 +7153,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7204,9 +7169,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7335,8 +7300,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8139,14 +8104,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Pijl grootte - + Arrow type Pijl type diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index 9d5fb55d01..28ca431062 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 41444f8b40..0d3a44b5de 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -656,7 +656,7 @@ Działa to tylko wtedy, gdy opcja "Szyk łączy" jest nieaktywna. Fuse - Scal + Scalenie @@ -1544,7 +1544,6 @@ definicje wzorów, do dodania do standardowych wzorów Rozmiar czcionki - @@ -1552,6 +1551,7 @@ definicje wzorów, do dodania do standardowych wzorów + mm mm @@ -1652,8 +1652,8 @@ w widżecie Skala adnotacji. Jeśli skala wynosi 1:100, mnożnik wynosi 100.Domyślna szerokość linii - + px px @@ -1975,9 +1975,9 @@ z Menedżera dodatków. Pozwól programowi FreeCAD na automatyczne pobieranie i aktualizację bibliotek DXF - - + + Import options Opcje importu @@ -2195,8 +2195,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Jeśli jest ustawiona na "0", cały splajn jest traktowany jako odcinek prosty. - + Export options Opcje eksportu @@ -2475,10 +2475,10 @@ Linie te są grubsze niż zwykłe linie siatki. Jest to metoda, której FreeCAD użyje do konwersji plików DWG na DXF. Jeśli wybrano opcję "Automatycznie", FreeCAD spróbuje znaleźć jeden z poniższych konwerterów w takiej samej kolejności, w jakiej są one tutaj pokazane. Jeśli FreeCAD nie będzie w stanie znaleźć żadnego z nich, konieczne może być wybranie konkretnego konwertera i wskazanie jego ścieżki w tym miejscu. Wybierz narzędzie "dwg2dxf" jeśli używasz LibreDWG, "ODAFileConverter" jeśli używasz konwertera plików ODA, lub narzędzie "dwg2dwg" jeśli używasz wersji Pro programu QCAD. - + Automatic - Automatycznie + Automatyczna @@ -2754,7 +2754,7 @@ będzie widoczny tylko podczas wykonywania poleceń Global - Globalne + Globalnie @@ -2772,8 +2772,8 @@ będzie widoczny tylko podczas wykonywania poleceń - - + + @@ -3182,7 +3182,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele - + Rotate Obróć @@ -3205,7 +3205,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele - + Offset Odsunięcie @@ -3397,59 +3397,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Ustaw skalę używaną przez narzędzia do tworzenia opisów - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Brak aktywnego dokumentu — przerwano. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Nieprawidłowe dane wejściowe: obiektu {} nie ma w dokumencie. - + Unable to insert new object into a scaled part Nie można wstawić nowego obiektu do przeskalowanej części - + Symbol not implemented. Using a default symbol. Symbol nie został zaimplementowany. Użyj symbolu domyślnego. - + image is Null brak obrazu - + filename does not exist on the system or in the resource file nazwa pliku nie istnieje w systemie lub w zasobach - + unable to load texture nie można załadować tekstury - + Does not have 'ViewObject.RootNode'. Nie ma "ViewObject.RootNode". @@ -3522,7 +3522,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: unknown document {} - Wrong input: unknown document {} + Nieprawidłowe dane wejściowe: nieznany dokument {} @@ -3557,65 +3557,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz punkt docelowy - + Create Label Utwórz nazwę - - + + Pick endpoint of leader line Wybierz punkt końcowy linii pomocniczej - - + + Pick text position Wybierz pozycję tekstu - - - + + + Pick first point Wybierz pierwszy punkt - + Create Line Utwórz linię - + Create Wire Utwórz polilinię - + Polyline Polilinia - - - - - - - + + + + + + + Pick next point Wybierz kolejny punkt - + Unable to create a Wire from selected objects Nie można utworzyć linii łamanej z zaznaczonych obiektów - + Convert to Wire Konwertuj do Linii łamanej @@ -3640,54 +3640,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz lokalizację punktu - + Create Text Utwórz tekst - + Select an object to convert. Wybierz obiekt do konwersji. - + Convert to Sketch Konwertuj na szkic - + Convert to Draft Konwertuj na rysunek roboczy - + Convert Draft/Sketch Konwertuj rysunek roboczy / szkic - + Select an object to move Wybierz obiekt do przeniesienia - + Pick start point Wybierz punkt początkowy - - + + Pick end point Wybierz punkt końcowy - + Move Przesuń - - + + Some subelements could not be moved. Niektóre elementy podrzędne nie mogły być przeniesione. @@ -3698,77 +3698,77 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz punkt środkowy - - - + + + - + Pick radius Wybierz promień - - - + + + Start angle Kąt początkowy - - + + Pick start angle Wybierz kąt początkowy - - - + + + Aperture angle Kąt otwarcia - + Pick aperture Wybierz otwarcie - + Create Circle (Part) Utwórz okrąg (środowisko pracy Część) - + Create Circle Utwórz okrąg - + Create Arc (Part) Utwórz łuk (środowisko pracy Część) - + Create Arc Utwórz łuk - + Pick aperture angle Wybierz kąt otwarcia - - + + Arc by 3 points Łuk przez trzy punkty - + Create Arc by 3 points - Create Arc by 3 points + Utwórz łuk przez trzy punkty @@ -3776,7 +3776,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Przełącz widoczność siatki - + Select an object to edit Wybierz obiekt do edycji @@ -3791,17 +3791,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Edytuj węzły - + No edit point found for selected object Brak punktu edycji dla wybranego obiektu - + Too many objects selected, max number set to: Wybrano zbyt wiele obiektów, maksymalna liczba została ustawiona na: - + : this object is not editable : tego obiektu nie można edytować @@ -3831,13 +3831,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Zapisz plik stylów - + Select an object to project Wybierz obiekt do rzutowania - - + + Create Point Utwórz punkt @@ -3853,31 +3853,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle Kąt bazowy - + The base angle you wish to start the rotation from Kąt początkowy, od którego chcesz rozpocząć obrót - + Pick base angle Wybierz kąt początkowy - + Rotation Obrót - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Zakres obrotu, który chcesz wykonać. @@ -3885,7 +3885,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. - + Pick rotation angle Wybierz środek obrotu @@ -3990,12 +3990,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Wielokąt foremny - + Create Polygon (Part) Utwórz wielokąt (środowiska pracy Część) - + Create Polygon Utwórz wielokąt foremny @@ -4005,7 +4005,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Kliknij gdziekolwiek na linii, aby ją podzielić. - + Split line Podziel linię @@ -4015,8 +4015,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Wybierz obiekty do przycięcia lub wydłużenia - + Pick distance Wybierz odległość @@ -4056,14 +4056,14 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Splajn został zamknięty - + Last point has been removed Usunięto ostatni punkt - + Create B-spline Utwórz krzywą złożoną @@ -4225,14 +4225,14 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Elipsa - - + + Create Ellipse Utwórz elipsę - - + + Pick opposite point Wybierz przeciwległy punkt @@ -4325,25 +4325,25 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Wymiar - - - - + + + + Create Dimension Utwórz wymiar - + Create Dimension (radial) Utwórz wymiar (promieniowy) - + Edge too short! Krawędź jest za krótka! - + Edges don't intersect! Krawędzie nie przecinają się! @@ -4373,12 +4373,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Wybierz punkt końcowy przemieszczenia - + Turning one Rectangle into a Wire Przekształcanie jednego prostokąta w polilinię - + Stretch Rozciągnij @@ -4388,12 +4388,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Prostokąt - + Create Plane Utwórz płaszczyznę - + Create Rectangle Utwórz prostokąt @@ -4408,13 +4408,13 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Wybierz punkt początkowy linii odbicia - + Mirror Odbicie lustrzane - - + + Pick end point of mirror line Wybierz punkt końcowy linii odbicia @@ -4424,19 +4424,19 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Szyk krętej ścieżki - + Select an object to clone Wybierz obiekt do sklonowania - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Nie można sklonować obiektu bez Kształtu, działanie przerwane - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Nie można sklonować obiektu bez kształtu, następuje pominięcie @@ -4444,13 +4444,13 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Zmień nachylenie - - + + Select an object to upgrade Wybierz obiekt do ulepszenia - + Upgrade Ulepsz kształt @@ -4475,7 +4475,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Odsunięcie krzywych Béziera nie jest obecnie obsługiwane - + Create 2D view Utwórz widok 2D @@ -4495,14 +4495,14 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Napraw - + Downgrade Rozbij kształt - - + + Task panel: Panel zadań: @@ -4513,26 +4513,26 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Szyk biegunowy - - + + At least one element must be selected. Przynajmniej jeden element musi zostać wybrany. - - + + Selection is not suitable for array. Wybór nie jest odpowiedni dla szyku. - - - - + + + + Object: Obiekt: @@ -4552,16 +4552,16 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Kąt jest mniejszy niż -360 stopni. Aby kontynuować, należy ustawić go na tę wartość. - - + + Fuse: Scalenie: - - + + Create Link array: Utwórz szyk odnośników: @@ -4576,8 +4576,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Kąt polarny: - + Center of rotation: Środek obrotu: @@ -4696,17 +4696,17 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.zmieniono typ właściwości "Śledzenie" - + ShapeString: oblique angle must be in the -80 to +80 degree range Kształt z tekstu: Kąt pochylenia musi się zawierać w zakresie -80° do +80° - + ShapeString: string has no wires Kształt z tekstu: ciąg nie ma polilinii - + ShapeString: face creation failed for one character Kształt z tekstu: tworzenie ścianki nie powiodło się dla jednego ze znaków @@ -4788,12 +4788,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Two objects are needed. - Two objects are needed. + Wymagane są dwa obiekty. One object is not valid. - One object is not valid. + Jeden obiekt jest nieprawidłowy. @@ -4833,38 +4833,35 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Nie można wygenerować kształtu: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + Nieprawidłowe dane wejściowe: obiektu base_object nie ma w dokumencie. - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + Nieprawidłowe dane wejściowe: obiektu "path_object" nie ma w dokumencie. - - - - - - + + + + + + Wrong input: must be a number. Błędne wejście: musi być liczba. - - - - + @@ -4874,18 +4871,21 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. - + + + + Wrong input: must be a vector. Błędne wejście: musi być wektor. - + Wrong input: must be a list or tuple of strings, or a single string. Nieprawidłowe dane wejściowe: spodziewana lista lub tupla ciągów znaków albo pojedynczy ciąg znaków. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Nieprawidłowe dane wejściowe: spodziewany ciąg znaków "Oryginalny", "Swobodny" lub "Styczny". @@ -4902,8 +4902,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Dane wejściowe: pojedyncza wartość rozszerzona do wektora. - + Wrong input: must be an integer number. Nieprawidłowe dane wejściowe: spodziewana liczba całkowita. @@ -4917,7 +4917,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. - + Wrong input: must be a placement, a vector, or a rotation. Nieprawidłowe dane wejściowe: spodziewane umiejscowienie, wektor lub obrót. @@ -4925,22 +4925,22 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + Nieprawidłowe dane wejściowe: obiekt "target_object" nie może być listą. Wrong input: target_object not in document. - Wrong input: target_object not in document. + Nieprawidłowe dane wejściowe: obiektu "target_object" nie ma w dokumencie. Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + Nieprawidłowe dane wejściowe: elementy podrzędne muszą być listą lub krotką ciągów lub pojedynczym ciągiem. Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + Nieprawidłowe dane wejściowe: element podrzędny: {}, nie należy do obiektu. @@ -4969,7 +4969,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + Nieprawidłowe dane wejściowe: obiekt "Punkty" {} musi być listą co najmniej dwóch wektorów. @@ -4982,12 +4982,12 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Nieprawidłowe dane wejściowe: spodziewana lista dwóch elementów. Na przykład [obiekt, "Krawędź1"]. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + Nieprawidłowe dane wejściowe: obiektu "point_object" nie ma w dokumencie. - + Wrong input: object has the wrong type. Nieprawidłowe dane wejściowe: obiekt ma błędny typ. @@ -5004,13 +5004,13 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + Nieprawidłowe dane wejściowe: obiekt "edge_object" nie może być listą ani krotką. Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + Nieprawidłowe dane wejściowe: obiektu "edge_object" nie ma w dokumencie. @@ -5314,9 +5314,9 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.dodano właściwość widoku "Kolor tekstu" - - + + renamed 'DisplayMode' options to 'World/Screen' zmieniono nazwę opcji "Tryb wyświetlania" na "Otoczenie / Ekran" @@ -5502,7 +5502,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene Błąd: nie znaleziono modułu json. Nie można zapisać stylu - + Clone Klonuj @@ -5513,21 +5513,21 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene Nachylenie - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Kierunek odsunięcia nie jest zdefiniowany. Proszę przesuń kursor myszki do wewnątrz lub na zewnątrz obiektu, aby wskazać kierunek - - + + True Prawda - - + + False Fałsz @@ -5739,7 +5739,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi Menu -> Mene Unknown SVG export style, switching to Translated - Nieznany styl eksportu SVG, przełączanie na przetłumaczone + Nieznany format eksportu SVG, przekształcam @@ -5838,12 +5838,12 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. Draft_Wire - + Polyline Polilinia - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Tworzy wielopunktową linię (polilinię). CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. @@ -6118,12 +6118,12 @@ Jednak pojedynczy szkic z rozłączonymi elementami zostanie przekonwertowany na Draft_Move - + Move Przesuń - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6150,12 +6150,12 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. Draft_Arc_3Points - + Arc by 3 points Łuk przez trzy punkty - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Tworzy łuk kołowy przez wskazanie 3 punktów. @@ -6165,12 +6165,12 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. Draft_ArcTools - + Arc tools Narzędzia łuku - + Create various types of circular arcs. Tworzy różne rodzaje łuków kołowych. @@ -6206,7 +6206,7 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. Edit - Edycja + Edytuj @@ -6218,32 +6218,6 @@ Naciśnij E lub ALT + kliknij lewym przyciskiem myszki, aby wyświetlić menu ko na obsługiwanych węzłach i na obsługiwanych obiektach. - - Draft_AddPoint - - - Add point - Dodaj punkt - - - - Adds a point to an existing Wire or B-spline. - Dodaje punkt do istniejącej polilinii lub krzywej złożonej. - - - - Draft_DelPoint - - - Remove point - Usuń punkt - - - - Removes a point from an existing Wire or B-spline. - Usuwa punktu z bieżącej polilinii lub krzywej złożonej. - - Draft_CircularArray @@ -6339,7 +6313,7 @@ Utwórz najpierw grupę, aby użyć tego narzędzia. Autogroup - Grupowanie automatyczne + Grupuj automatycznie @@ -6453,7 +6427,7 @@ Jeśli wybrane zostaną inne obiekty, zostaną one zignorowane. Polygon - Wielokąt + Wielokąt foremny @@ -6632,7 +6606,7 @@ Szyk można przekształcić w szyk polarny lub kołowy, zmieniając jego typ. Scale - Skala + Skaluj @@ -7139,19 +7113,19 @@ ustaw wartość Prawda dla utworzenia połączenia, lub Fałsz dla kształtu zł - + Create a face Utwórz ścianę + + - - The area of this object Obszar tego obiektu @@ -7195,8 +7169,8 @@ ustaw wartość Prawda dla utworzenia połączenia, lub Fałsz dla kształtu zł Obiekt podstawowy, który będzie zduplikowany. - + The object along which the copies will be distributed. It must contain 'Edges'. Obiekt, wzdłuż którego zostaną rozmieszczone kopie. Musi on zawierać "Krawędzie". @@ -7211,9 +7185,9 @@ ustaw wartość Prawda dla utworzenia połączenia, lub Fałsz dla kształtu zł Współczynnik obrotu krętego szyku. - - + + Show the individual array elements (only for Link arrays) Pokaż poszczególne elementy szyku (tylko dla szyków powiązań) @@ -7342,8 +7316,8 @@ Podczas używania zapisanego stylu niektóre właściwości widoku będą dostę będzie można je edytować tylko przez zmianę stylu za pomocą narzędzia "edytor stylów adnotacji". - + The base object that will be duplicated Obiekt podstawowy, który zostanie zduplikowany @@ -8144,14 +8118,14 @@ Pozostaw puste dla systemowych ustawień domyślnych.. Użyj "arch", aby wymusić notację architektoniczną amerykańską - + Arrow size Rozmiar strzałki - + Arrow type Styl strzałki @@ -8214,7 +8188,7 @@ beyond the dimension line Draft - Rysunek roboczy + Rysunek Roboczy diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 1f3dee0456..853f1a9660 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 556eab43ca..0fae0c89d2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -1543,7 +1543,6 @@ pattern definitions to be added to the standard patterns Tamanho da fonte - @@ -1551,6 +1550,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1651,8 +1651,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1974,9 +1974,9 @@ do Gerenciador de Complementos. Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF - - + + Import options Opções de importação @@ -2194,8 +2194,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Se definido como '0' toda a spline é tratada como um segmento reto. - + Export options Opções de Exportação @@ -2472,8 +2472,8 @@ These lines are thicker than normal grid lines. Este é o método que o FreeCAD usará para converter arquivos DWG para DXF. Se for escolhido "Automático", o FreeCAD tentará encontrar um dos seguintes conversores na mesma ordem que eles são mostrados aqui. Se o FreeCAD não for capaz de encontrar algum, será necessário escolher um conversor específico e indicar seu caminho aqui abaixo. Escolha o utilitário "dwg2dxf" se estiver usando o LibreDWG, "ODAFileConverter" se estiver usando o conversor de arquivos ODA, ou o utilitário "dwg2dwg" se estiver utilizando a versão pro do QCAD. - + Automatic Automática @@ -2768,8 +2768,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3177,7 +3177,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rotacionar @@ -3200,7 +3200,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Deslocamento @@ -3391,59 +3391,59 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Definir a escala usada pelas ferramentas de anotação de rascunho - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Nenhum documento ativo. Abortando. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Não foi possível inserir novo objeto em uma peça em escala - + Symbol not implemented. Using a default symbol. Símbolo não implementado. Usando um símbolo padrão. - + image is Null imagem é nula - + filename does not exist on the system or in the resource file nome do arquivo não existe no sistema ou no arquivo de recursos - + unable to load texture não foi possível carregar a textura - + Does not have 'ViewObject.RootNode'. Não tem 'ViewObject.RootNode'. @@ -3551,65 +3551,65 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Escolha o ponto alvo - + Create Label Criar etiqueta - - + + Pick endpoint of leader line Escolha a extremidade da linha do líder - - + + Pick text position Selecionar posição do texto - - - + + + Pick first point Escolha o primeiro ponto - + Create Line Criar linha - + Create Wire Criar arame - + Polyline Polilinha - - - - - - - + + + + + + + Pick next point Escolha o próximo ponto - + Unable to create a Wire from selected objects Não foi possível criar um arame a partir dos objetos selecionados - + Convert to Wire Converter em arame @@ -3634,54 +3634,54 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Escolher ponto de localização - + Create Text Criar texto - + Select an object to convert. Selecione um objeto para converter. - + Convert to Sketch Converter para esboço - + Convert to Draft Converter para rascunho - + Convert Draft/Sketch Converter rascunho/esboço - + Select an object to move Selecione um objeto para mover - + Pick start point Escolher ponto inicial - - + + Pick end point Escolha o ponto final - + Move Mover - - + + Some subelements could not be moved. Alguns sub-elementos não puderam ser movidos. @@ -3692,75 +3692,75 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Escolher o ponto central - - - + + + - + Pick radius Escolher raio - - - + + + Start angle Angulo inicial - - + + Pick start angle Escolha o ângulo inicial - - - + + + Aperture angle Ângulo de abertura - + Pick aperture Indique abertura - + Create Circle (Part) Criar Círculo (Parte) - + Create Circle Criar Círculo - + Create Arc (Part) Criar Arco (Parte) - + Create Arc Criar Arco - + Pick aperture angle Escolha o ângulo de abertura - - + + Arc by 3 points Arco por 3 pontos - + Create Arc by 3 points Create Arc by 3 points @@ -3770,7 +3770,7 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Ligar/Desligar grade - + Select an object to edit Selecione um objeto para editar @@ -3785,17 +3785,17 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Editar nós - + No edit point found for selected object Nenhum ponto de edição foi encontrado para o objeto selecionado - + Too many objects selected, max number set to: Muitos objetos selecionados, o número máximo está definido para: - + : this object is not editable : este objeto não é editável @@ -3825,13 +3825,13 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Salvar arquivo de estilos - + Select an object to project Selecione um objeto para ser projetado - - + + Create Point Criar um ponto @@ -3847,38 +3847,38 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. - + Base angle Ângulo base - + The base angle you wish to start the rotation from O ângulo base a partir do qual você deseja iniciar a rotação - + Pick base angle Indique o ângulo base - + Rotation Rotação - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. A quantidade de rotação que você deseja executar. O ângulo final será o ângulo base mais essa quantidade. - + Pick rotation angle Escolha o ângulo de rotação @@ -3983,12 +3983,12 @@ The final angle will be the base angle plus this amount. Polígono - + Create Polygon (Part) Criar polígono (Parte) - + Create Polygon Criar polígono @@ -3998,7 +3998,7 @@ The final angle will be the base angle plus this amount. Clique em qualquer lugar em uma linha para dividi-lo. - + Split line Dividir linha @@ -4008,8 +4008,8 @@ The final angle will be the base angle plus this amount. Selecione objetos para aparar ou estender - + Pick distance Indique a distância @@ -4049,14 +4049,14 @@ The final angle will be the base angle plus this amount. A Spline foi fechada - + Last point has been removed O último ponto foi removido - + Create B-spline Criar B-spline @@ -4218,14 +4218,14 @@ The final angle will be the base angle plus this amount. Elipse - - + + Create Ellipse Criar elipse - - + + Pick opposite point Escolha o ponto oposto @@ -4318,25 +4318,25 @@ The final angle will be the base angle plus this amount. Dimensão - - - - + + + + Create Dimension Criar dimensão - + Create Dimension (radial) Criar Dimensão (radial) - + Edge too short! Aresta curta demais! - + Edges don't intersect! As aresta não se cruzam! @@ -4366,12 +4366,12 @@ The final angle will be the base angle plus this amount. Escolha o ponto final do deslocamento - + Turning one Rectangle into a Wire Convertendo um retângulo em arame - + Stretch Esticar @@ -4381,12 +4381,12 @@ The final angle will be the base angle plus this amount. Retângulo - + Create Plane Criar plano - + Create Rectangle Criar Retângulo @@ -4401,13 +4401,13 @@ The final angle will be the base angle plus this amount. Escolha o ponto inicial da linha de espelho - + Mirror Espelhar - - + + Pick end point of mirror line Escolha o ponto final da linha de espelhamento @@ -4417,17 +4417,17 @@ The final angle will be the base angle plus this amount. Matriz de trajetória retorcida - + Select an object to clone Selecione um objeto para clonar - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4437,13 +4437,13 @@ The final angle will be the base angle plus this amount. Alterar inclinação - - + + Select an object to upgrade Selecione um objeto para promover - + Upgrade Promover @@ -4468,7 +4468,7 @@ The final angle will be the base angle plus this amount. O deslocamento de curvas de Bézier não é suportado no momento - + Create 2D view Criar vista 2D @@ -4488,14 +4488,14 @@ The final angle will be the base angle plus this amount. Reparar - + Downgrade Rebaixar - - + + Task panel: Painel de tarefas: @@ -4506,26 +4506,26 @@ The final angle will be the base angle plus this amount. Rede polar - - + + At least one element must be selected. Deve ser selecionado ao menos um elemento. - - + + Selection is not suitable for array. A seleção não é adequada para matriz. - - - - + + + + Object: Objeto: @@ -4545,16 +4545,16 @@ The final angle will be the base angle plus this amount. O ângulo está abaixo de -360 graus. Será usado um valor de -360 graus para prosseguir. - - + + Fuse: Fundir: - - + + Create Link array: Rede de trajetória link: @@ -4569,8 +4569,8 @@ The final angle will be the base angle plus this amount. Ângulo polar: - + Center of rotation: Centro de rotação: @@ -4689,17 +4689,17 @@ The final angle will be the base angle plus this amount. alterado o tipo de propriedade 'Rastreamento' - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: O texto não contém arames - + ShapeString: face creation failed for one character FormaString: a criação de face falhou para um caractere @@ -4826,38 +4826,35 @@ The final angle will be the base angle plus this amount. Não é possível gerar uma forma: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Entrada errada: deve ser um número. - - - - + @@ -4867,18 +4864,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Entrada errada: deve ser um vetor. - + Wrong input: must be a list or tuple of strings, or a single string. Entrada errada: deve ser uma lista, ou tupla de textos, ou um único texto. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Entrada errada: deve ser 'Original', 'Frenet' ou 'Tangente'. @@ -4895,8 +4895,8 @@ The final angle will be the base angle plus this amount. Entrada: valor único expandido para vetor. - + Wrong input: must be an integer number. Entrada errada: deve ser um número inteiro. @@ -4910,7 +4910,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Entrada errada: deve ser um posicionamento, um vetor ou uma rotação. @@ -4975,12 +4975,12 @@ The final angle will be the base angle plus this amount. Entrada errada: deve ser uma lista de dois elementos. Por exemplo, [objeto, 'Aresta1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Entrada errada: o objeto tem o tipo errado. @@ -5307,9 +5307,9 @@ The final angle will be the base angle plus this amount. propriedade de visualização 'TextColor' adicionada - - + + renamed 'DisplayMode' options to 'World/Screen' renomeado opção 'DisplayMode' para 'Mundo/Tela' @@ -5496,7 +5496,7 @@ no menu ferramentas -> Gerenciador de Extensões Erro: módulo json não encontrado. Não foi possível carregar o estilo - + Clone Clonar @@ -5507,21 +5507,21 @@ no menu ferramentas -> Gerenciador de Extensões Inclinação - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Direção do deslocamento não definida. Por favor, primeiro mova o mouse em ambos os lados do objeto para indicar uma direção - - + + True Verdadeiro - - + + False Falso @@ -5831,12 +5831,12 @@ será usado para fornecer informações ao rótulo. Draft_Wire - + Polyline Polilinha - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Cria uma linha de múltiplos pontos (polilinha). CTRL para capturar, SHIFT para fixar. @@ -6110,12 +6110,12 @@ No entanto, um único desenho com elementos desconectados será convertido em v Draft_Move - + Move Mover - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6142,12 +6142,12 @@ CTRL para ajustar, SHIFT para restringir. Draft_Arc_3Points - + Arc by 3 points Arco por 3 pontos - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Cria um arco circular escolhendo 3 pontos. @@ -6157,12 +6157,12 @@ CTRL para ajustar, SHIFT para restringir. Draft_ArcTools - + Arc tools Ferramentas de arco - + Create various types of circular arcs. Cria vários tipos de arcos circulares. @@ -6210,32 +6210,6 @@ Pressione E ou ALT+Clique esquerdo para exibir o menu de contexto em nós suportados e em objetos suportados. - - Draft_AddPoint - - - Add point - Adicionar ponto - - - - Adds a point to an existing Wire or B-spline. - Adiciona um ponto a um arame/bspline existente. - - - - Draft_DelPoint - - - Remove point - Remover ponto - - - - Removes a point from an existing Wire or B-spline. - Remove um ponto de um arame ou B-spline existente. - - Draft_CircularArray @@ -7124,19 +7098,19 @@ defina Verdadeiro para fusão ou Falso para o composto - + Create a face Criar uma face + + - - The area of this object A área deste objeto @@ -7180,8 +7154,8 @@ defina Verdadeiro para fusão ou Falso para o composto O objeto base que será duplicado. - + The object along which the copies will be distributed. It must contain 'Edges'. O objeto ao longo do qual as cópias serão distribuídas. Deve conter 'Arestas'. @@ -7196,9 +7170,9 @@ defina Verdadeiro para fusão ou Falso para o composto Fator de rotação da rede torcida. - - + + Show the individual array elements (only for Link arrays) Mostrar os elementos de matriz individuais (somente para redes de vínculos) @@ -7327,8 +7301,8 @@ Ao usar um estilo salvo, algumas das propriedades de exibição se tornarão som eles só serão editáveis mudando o estilo através da ferramenta "Editor de estilo de anotação". - + The base object that will be duplicated O objeto de base que será duplicado @@ -8130,14 +8104,14 @@ Deixe em branco para o padrão do sistema. Use "arco" para forçar a notação de arco dos EUA - + Arrow size Tamanho do ponteiro - + Arrow type Tipo de ponteiro diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index a6b3ed627b..505e288f13 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 737fde9d9e..cee0856341 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -1546,7 +1546,6 @@ pattern definitions to be added to the standard patterns Tamanho da fonte - @@ -1554,6 +1553,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1654,8 +1654,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1977,9 +1977,9 @@ from the Addon Manager. Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF - - + + Import options Opções de importação @@ -2197,8 +2197,8 @@ If it is set to '0' the whole spline is treated as a straight segment. If it is set to '0' the whole spline is treated as a straight segment. - + Export options Opções de Exportação @@ -2475,8 +2475,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automática @@ -2771,8 +2771,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3180,7 +3180,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rodar @@ -3203,7 +3203,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Deslocamento paralelo @@ -3396,59 +3396,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3556,65 +3556,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Escolha o ponto de destino - + Create Label Criar rótulo - - + + Pick endpoint of leader line Escolha o ponto de extremidade da linha de chamada - - + + Pick text position Escolha a posição do texto - - - + + + Pick first point Escolher primeiro ponto - + Create Line Criar linha - + Create Wire Criar Traço - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Escolha o próximo ponto - + Unable to create a Wire from selected objects Não é possível criar um Traço a partir dos objetos selecionados - + Convert to Wire Converter para Traço @@ -3639,54 +3639,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Escolha o ponto de localização - + Create Text Criar texto - + Select an object to convert. Selecione um objeto para converter. - + Convert to Sketch Converter para esboço (Sketch) - + Convert to Draft Converter para traço (Draft) - + Convert Draft/Sketch Converter traço (draft)/esboço - + Select an object to move Selecione um objeto para mover - + Pick start point Escolher ponto de origem - - + + Pick end point Escolher o ponto de extremidade - + Move Mover - - + + Some subelements could not be moved. Alguns sub-elementos não puderam ser movidos. @@ -3697,75 +3697,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Escolher o centro - - - + + + - + Pick radius Escolher raio - - - + + + Start angle Ângulo inicial - - + + Pick start angle Escolher ângulo inicial - - - + + + Aperture angle Ângulo de Abertura - + Pick aperture Escolher abertura - + Create Circle (Part) Criar Círculo (Parte) - + Create Circle Criar círculo - + Create Arc (Part) Criar Arco (Parte) - + Create Arc Criar Arco - + Pick aperture angle Escolher ângulo de abertura - - + + Arc by 3 points Arco por 3 pontos - + Create Arc by 3 points Create Arc by 3 points @@ -3775,7 +3775,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Alternar Grelha - + Select an object to edit Selecione um objeto para editar @@ -3790,17 +3790,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Editar nó - + No edit point found for selected object Nenhum ponto de edição encontrado para o objeto selecionado - + Too many objects selected, max number set to: Demasiados objetos selecionados, número máximo definido para: - + : this object is not editable : this object is not editable @@ -3830,13 +3830,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3852,31 +3852,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3884,7 +3884,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3989,12 +3989,12 @@ The final angle will be the base angle plus this amount. Polígono - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4004,7 +4004,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4014,8 +4014,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4055,14 +4055,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Criar B-spline @@ -4224,14 +4224,14 @@ The final angle will be the base angle plus this amount. Elipse - - + + Create Ellipse Criar elipse - - + + Pick opposite point Escolher ponto oposto @@ -4324,25 +4324,25 @@ The final angle will be the base angle plus this amount. Dimensão - - - - + + + + Create Dimension Criar cotagem - + Create Dimension (radial) Criar cotagem (radial) - + Edge too short! Aresta demasiado curta! - + Edges don't intersect! As arestas não se intercetam! @@ -4372,12 +4372,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4387,12 +4387,12 @@ The final angle will be the base angle plus this amount. Retângulo - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4407,13 +4407,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4423,17 +4423,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4443,13 +4443,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4474,7 +4474,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4494,14 +4494,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4512,26 +4512,26 @@ The final angle will be the base angle plus this amount. Matriz polar - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4551,16 +4551,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4575,8 +4575,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4695,17 +4695,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: O desenho não contém traços - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4832,38 +4832,35 @@ The final angle will be the base angle plus this amount. Não é possível gerar a forma: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Entrada errada: deve ser um número. - - - - + @@ -4873,18 +4870,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Entrada errada: deve ser um vetor. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4901,8 +4901,8 @@ The final angle will be the base angle plus this amount. Entrada: valor único expandido para vetor. - + Wrong input: must be an integer number. Entrada errada: deve ser um número inteiro. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4981,12 +4981,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5313,9 +5313,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5502,7 +5502,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Clonar @@ -5513,21 +5513,21 @@ from menu Tools -> Addon Manager Inclinação - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Verdadeiro - - + + False Falso @@ -5837,12 +5837,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6116,12 +6116,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Mover - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6148,12 +6148,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arco por 3 pontos - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6163,12 +6163,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6216,32 +6216,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Adicionar ponto - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7133,19 +7107,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7189,8 +7163,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7205,9 +7179,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7336,8 +7310,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8140,14 +8114,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Tamanho da seta - + Arrow type Tipo de seta diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index daae6b393c..4b13665ac6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index c939a39fc4..585dd37559 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -1547,7 +1547,6 @@ pattern definitions to be added to the standard patterns Dimensiunea fontului - @@ -1555,6 +1554,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1655,8 +1655,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1978,9 +1978,9 @@ din Managerul de Suplimente. Permite FreeCAD să descarce automat și să actualizeze bibliotecile DXF - - + + Import options Importare opțiuni @@ -2198,8 +2198,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Dacă este setată la '0' întreaga curbă este tratată ca un segment drept. - + Export options Opţiunile de export @@ -2476,8 +2476,8 @@ These lines are thicker than normal grid lines. Aceasta este metoda pe care FreeCAD o va folosi pentru a converti fişierele DWG în DXF. Dacă este ales "Automatic", FreeCAD va încerca să găsească unul dintre următorii convertori în aceeași ordine în care sunt afișați aici. Dacă FreeCAD nu poate găsi unul, ar putea fi necesar să alegeți un anumit convertor și să indicați calea acestuia de aici desubt. Alegeți utilitatea "dwg2dxf" dacă folosiți LibreDWG, "ODAFileConverter" dacă folosiți convertorul de fișiere ODA sau utilitatea "dwg2dwg" dacă folosiți versiunea pro a QCAD. - + Automatic Automat @@ -2772,8 +2772,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3075,7 +3075,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Undo - Undo + Anulează @@ -3182,7 +3182,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rotire @@ -3205,7 +3205,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Compensare @@ -3398,59 +3398,59 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Setați scara utilizată de instrumentele de adnotare a ciornei - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Niciun document activ. Abandonat. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Imposibil de inserat un obiect nou într-o parte scalată - + Symbol not implemented. Using a default symbol. Simbol neimplementat. Folosind un simbol implicit. - + image is Null imaginea este nulă - + filename does not exist on the system or in the resource file numele fișierului nu există în sistem sau în fișierul de resurse - + unable to load texture nu se poate încărca textura - + Does not have 'ViewObject.RootNode'. Nu are 'ViewObject.RootNode'. @@ -3558,65 +3558,65 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Alege punctul țintă - + Create Label Creare etichetă - - + + Pick endpoint of leader line Alege criteriul final al liniei de lider - - + + Pick text position Alege poziţia textului - - - + + + Pick first point Alege primul punct - + Create Line Crează linie - + Create Wire Crează Wire - + Polyline Polilină - - - - - - - + + + + + + + Pick next point Alege următorul punct - + Unable to create a Wire from selected objects Nu s-a putut crea un fir din obiectele selectate - + Convert to Wire Convertește în Wire @@ -3641,54 +3641,54 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Mută - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3699,75 +3699,75 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3777,7 +3777,7 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Toggle grid - + Select an object to edit Select an object to edit @@ -3792,17 +3792,17 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3832,13 +3832,13 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da.Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3854,31 +3854,31 @@ Pentru a permite FreeCAD să descarce aceste biblioteci, răspunde Da. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3886,7 +3886,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3991,12 +3991,12 @@ The final angle will be the base angle plus this amount. Poligon - + Create Polygon (Part) Crează poligon (Parte) - + Create Polygon Creare poligon @@ -4006,7 +4006,7 @@ The final angle will be the base angle plus this amount. Faceți clic oriunde pe o linie pentru a o împărți. - + Split line Împarte linia @@ -4016,8 +4016,8 @@ The final angle will be the base angle plus this amount. Selectați obiecte de tăiat sau extins - + Pick distance Alege distanța @@ -4057,14 +4057,14 @@ The final angle will be the base angle plus this amount. Linia a fost închisă - + Last point has been removed Ultimul punct a fost eliminat - + Create B-spline Creează o Bspline @@ -4226,14 +4226,14 @@ The final angle will be the base angle plus this amount. Elipsa - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4326,25 +4326,25 @@ The final angle will be the base angle plus this amount. Dimensiune - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4374,12 +4374,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4389,12 +4389,12 @@ The final angle will be the base angle plus this amount. Dreptunghi - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4409,13 +4409,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4425,17 +4425,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4445,13 +4445,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4476,7 +4476,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4496,14 +4496,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4514,26 +4514,26 @@ The final angle will be the base angle plus this amount. Matrice polară - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4553,16 +4553,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4577,8 +4577,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4697,17 +4697,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4834,38 +4834,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4875,18 +4872,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4903,8 +4903,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4918,7 +4918,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4983,12 +4983,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5315,9 +5315,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5504,7 +5504,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Clonă @@ -5515,21 +5515,21 @@ from menu Tools -> Addon Manager Slope - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Adevărat - - + + False Fals @@ -5839,12 +5839,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polilină - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -5854,7 +5854,7 @@ will be used to provide information to the label. Hatch - Hatch + Trapă @@ -6118,12 +6118,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Mută - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6150,12 +6150,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6165,12 +6165,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6218,32 +6218,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Adaugă punct - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7135,19 +7109,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7191,8 +7165,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7207,9 +7181,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7338,8 +7312,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8142,14 +8116,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Dimensiunea săgeții - + Arrow type Tipul de săgeată diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 93fb5e17be..ccd1e937f7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index a55321fe93..c0f8643631 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -553,8 +553,8 @@ Negative values will result in copies produced in the negative direction. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Если отмечено, то результирующие объекты в массиве будут слиты, если касаются друг друга. -Это работает только в том случае, если "Связь массивов" отключена. + Если флажок установлен, результирующие объекты в массиве будут сливаться, если они соприкасаются друг с другом. +Это работает только в том случае, если «массив ссылок» отключен. @@ -565,13 +565,13 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Если отмечено, результирующим объектом будет "Массив ссылок" вместо обычного массива. -Массив ссылок более эффективен при создании нескольких копий, но к нему нельзя применить операцию слияния. + Если флажок установлен, результирующий объект будет «массивом ссылок» вместо обычного массива. +Массив Link более эффективен при создании нескольких копий, но его нельзя объединить вместе. Link array - Массив из связанных объектов + Массив ссылок @@ -650,25 +650,25 @@ Change the direction of the axis itself in the property editor. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Если флажок установлен, результирующие объекты в массиве будут сливаться, если они соприкасаются друг с другом. -Это работает только в том случае, если «массив ссылок» отключен. + Если отмечено, то результирующие объекты в массиве будут слиты, если касаются друг друга. +Это работает только в том случае, если "Связь массивов" отключена. Fuse - Слияние + Объединение If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Если флажок установлен, результирующий объект будет «массивом ссылок» вместо обычного массива. -Массив Link более эффективен при создании нескольких копий, но его нельзя объединить вместе. + Если отмечено, результирующим объектом будет "Массив ссылок" вместо обычного массива. +Массив ссылок более эффективен при создании нескольких копий, но к нему нельзя применить операцию слияния. Link array - Массив ссылок + Массив из связанных объектов @@ -1091,7 +1091,7 @@ value by using the [ and ] keys while drawing Tick-2 - Засечка-2 + Зацепление-2 @@ -1541,7 +1541,6 @@ pattern definitions to be added to the standard patterns Размер шрифта - @@ -1549,6 +1548,7 @@ pattern definitions to be added to the standard patterns + mm мм @@ -1649,8 +1649,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.Ширина линии по умолчанию - + px пикс. @@ -1687,7 +1687,7 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Tick-2 - Зацепление-2 + Засечка-2 @@ -1972,9 +1972,9 @@ from the Addon Manager. Автоматически загружать и обновлять библиотеки DXF - - + + Import options Параметры импорта @@ -2186,8 +2186,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Если задано значение «0», весь сплайн рассматривается как прямой отрезок. - + Export options Параметры экспорта @@ -2464,8 +2464,8 @@ These lines are thicker than normal grid lines. Это метод FreeCAD будет использовать для преобразования DWG файлов в DXF. Если выбрано "Автоматически", FreeCAD попытается найти один из следующих конвертеров в том порядке, что они показаны здесь. Если FreeCAD не может найти его, вам может потребоваться выбрать конкретный конвертер и указать путь к нему сразу. Выберите утилиту "dwg2dxf" при использовании LibreDWG, "ODAFileConverter" при использовании ODA конвертера файлов или утилиты "dwg2dwg" при использовании версии QCAD. - + Automatic Автоматически @@ -2760,8 +2760,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3169,7 +3169,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Повернуть @@ -3192,7 +3192,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Смещение @@ -3382,59 +3382,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Установите масштаб для аннотаций - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Нет активного документа. Прерывание. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + "Неправильный ввод: объект не является документом". - + Unable to insert new object into a scaled part Невозможно вставить новый объект в масштабированную деталь - + Symbol not implemented. Using a default symbol. Символ не поддерживается. Испольуйте базовые символы. - + image is Null изображение пустое - + filename does not exist on the system or in the resource file имя файла не существует в системе или в файле ресурсов - + unable to load texture невозможно загрузить текстуру - + Does not have 'ViewObject.RootNode'. Не имеет 'ViewObject.RootNode'. @@ -3507,7 +3507,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: unknown document {} - Wrong input: unknown document {} + "Неправильный ввод: неизвестный документ" @@ -3542,65 +3542,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выберите целевую точку - + Create Label Добавить метку - - + + Pick endpoint of leader line Выберите конечную точку линии выноски - - + + Pick text position Указать положение текста - - - + + + Pick first point Указать первую точку - + Create Line Создать линию - + Create Wire Создать ломаную линию - + Polyline Полилиния - - - - - - - + + + + + + + Pick next point Указать следующую точку - + Unable to create a Wire from selected objects Невозможно создать каркас из выбранных объектов - + Convert to Wire Преобразовать в каркас @@ -3625,54 +3625,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Выбрать точку расположения - + Create Text Создать текст - + Select an object to convert. Выберите объект для преобразования. - + Convert to Sketch Преобразовать в Набросок - + Convert to Draft Преобразовать в Эскиз - + Convert Draft/Sketch Преобразовать черновик/эскиз - + Select an object to move Выберите объект для перемещения - + Pick start point Указать начальную точку - - + + Pick end point Указать конечную точку - + Move Перемещение - - + + Some subelements could not be moved. Некоторые подэлементы не могут быть перемещены. @@ -3683,77 +3683,77 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Указать центральную точку - - - + + + - + Pick radius Указать радиус - - - + + + Start angle Начальный угол - - + + Pick start angle Выбрать начальный угол - - - + + + Aperture angle Угол раскрытия - + Pick aperture Выбрать раскрытие - + Create Circle (Part) Создать круг (деталь) - + Create Circle Создать окружность - + Create Arc (Part) Создать дугу (деталь) - + Create Arc Создать дугу - + Pick aperture angle Выбрать угол раскрытия - - + + Arc by 3 points Дуга по 3 точкам - + Create Arc by 3 points - Create Arc by 3 points + Создает дугу по 3 точкам @@ -3761,7 +3761,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Переключить сетку - + Select an object to edit Выбрать объект для редактирования @@ -3776,17 +3776,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Редактировать узел - + No edit point found for selected object Для выбранного объекта не найдены редактируемые точки - + Too many objects selected, max number set to: Выбрано слишком много объектов, задано максимальное число: - + : this object is not editable : данный объект недоступен для редактирования @@ -3816,13 +3816,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Сохранить файл стилей - + Select an object to project Выберите объект для проецирования - - + + Create Point Создать Точку @@ -3838,31 +3838,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle Базовый угол - + The base angle you wish to start the rotation from Базовый угол, с которого вы хотите начать вращение - + Pick base angle Указать начальный угол - + Rotation Вращение - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Величина вращения, которую вы хотите выполнить. @@ -3870,7 +3870,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Выберите угол поворота @@ -3975,12 +3975,12 @@ The final angle will be the base angle plus this amount. Многоугольник - + Create Polygon (Part) Создать полигон (деталь) - + Create Polygon Создать полигон @@ -3990,7 +3990,7 @@ The final angle will be the base angle plus this amount. Щелкните в любом месте строки, чтобы разделить ее. - + Split line Разделить линию @@ -4000,8 +4000,8 @@ The final angle will be the base angle plus this amount. Выберите объекты для обрезки или удлинения - + Pick distance Выберите расстояние @@ -4041,14 +4041,14 @@ The final angle will be the base angle plus this amount. Сплайн замкнут - + Last point has been removed Последняя точка была удалена - + Create B-spline Создать B-сплайн @@ -4210,14 +4210,14 @@ The final angle will be the base angle plus this amount. Эллипс - - + + Create Ellipse Создать эллипс - - + + Pick opposite point Укажите противоположную точку @@ -4310,25 +4310,25 @@ The final angle will be the base angle plus this amount. Размер - - - - + + + + Create Dimension Создать размер - + Create Dimension (radial) Создать радиальный размер - + Edge too short! Ребро слишком короткое! - + Edges don't intersect! Рёбра не пересекаются! @@ -4358,12 +4358,12 @@ The final angle will be the base angle plus this amount. Выберете конечную точку смещения - + Turning one Rectangle into a Wire Превращение одного прямоугольника в линию (wire) - + Stretch Растянуть @@ -4373,12 +4373,12 @@ The final angle will be the base angle plus this amount. Прямоугольник - + Create Plane Создать плоскость - + Create Rectangle Создать Прямоугольник @@ -4393,13 +4393,13 @@ The final angle will be the base angle plus this amount. Выберите начальную точку линии зеркалирования - + Mirror Зеркально - - + + Pick end point of mirror line Выберите конечную точку линии зеркалирования @@ -4409,19 +4409,19 @@ The final angle will be the base angle plus this amount. Массив объектов закрученных по указанному пути - + Select an object to clone Выберите объект для клонирования - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + "Нельзя клонировать без объекта, отмена" - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + "Нельзя клонировать без объекта(ов), пропуск" @@ -4429,13 +4429,13 @@ The final angle will be the base angle plus this amount. Изменить уклон - - + + Select an object to upgrade Выберите объект для обновления - + Upgrade Обновить @@ -4460,7 +4460,7 @@ The final angle will be the base angle plus this amount. Смещение кривых Безье в настоящее время не поддерживается - + Create 2D view Создать 2D вид @@ -4480,14 +4480,14 @@ The final angle will be the base angle plus this amount. Исправить - + Downgrade Упрощающее Преобразование - - + + Task panel: Панель задач: @@ -4498,26 +4498,26 @@ The final angle will be the base angle plus this amount. Массив вращения - - + + At least one element must be selected. Должен быть выбран хотя бы один элемент. - - + + Selection is not suitable for array. Выбор не подходит для массива. - - - - + + + + Object: Объект: @@ -4537,16 +4537,16 @@ The final angle will be the base angle plus this amount. Угол ниже -360 градусов. Он установлен к этому значению для продолжения. - - + + Fuse: Соединить: - - + + Create Link array: Создать массив ссылок: @@ -4561,8 +4561,8 @@ The final angle will be the base angle plus this amount. Полярный угол: - + Center of rotation: Центр вращения: @@ -4681,17 +4681,17 @@ The final angle will be the base angle plus this amount. изменен тип свойства «Отслеживание» - + ShapeString: oblique angle must be in the -80 to +80 degree range Строка фигуры: угол наклона должен находиться в диапазоне от -80 до +80 градусов - + ShapeString: string has no wires ShapeString: строка не имеет направляющих - + ShapeString: face creation failed for one character Текст в кривую: ошибка при создании грани для одного символа @@ -4773,12 +4773,12 @@ The final angle will be the base angle plus this amount. Two objects are needed. - Two objects are needed. + "Нужно два объекта". One object is not valid. - One object is not valid. + "Объект не правильный". @@ -4818,38 +4818,35 @@ The final angle will be the base angle plus this amount. Невозможно создать форму: - - - - + + + + Wrong input: base_object not in document. - Wrong input: base_object not in document. + "Неверный ввод: объекта нет в документе". - - + + Wrong input: path_object not in document. - Wrong input: path_object not in document. + "Неверный ввод: объекта нет в документе". - - - - - - + + + + + + Wrong input: must be a number. Неверный ввод: должно быть число. - - - - + @@ -4859,18 +4856,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Неверный ввод: должен быть вектор. - + Wrong input: must be a list or tuple of strings, or a single string. Неверный ввод: должен быть список или кортеж строк, или одна строка. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Неверный ввод: должно быть «Исходное», «Френе» или «Касательное». @@ -4887,8 +4887,8 @@ The final angle will be the base angle plus this amount. Вход: одно значение, расширенное до вектора. - + Wrong input: must be an integer number. Неправильный ввод: должно быть целое число. @@ -4902,7 +4902,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Неправильный ввод: должно быть размещение, вектор или поворот. @@ -4910,22 +4910,22 @@ The final angle will be the base angle plus this amount. Wrong input: target_object must not be a list. - Wrong input: target_object must not be a list. + "Неверный ввод: объект не должен быть списком". Wrong input: target_object not in document. - Wrong input: target_object not in document. + "Неверный ввод: объекта нет в документе". Wrong input: subelements must be a list or tuple of strings, or a single string. - Wrong input: subelements must be a list or tuple of strings, or a single string. + "Неверный ввод: подэлементы должны быть списком или кортеж в строке, или единой строкой". Wrong input: subelement {} not in object. - Wrong input: subelement {} not in object. + "Неверный ввод: подэлемент {} не является объектом". @@ -4954,7 +4954,7 @@ The final angle will be the base angle plus this amount. Wrong input: points {} must be a list of at least two vectors. - Wrong input: points {} must be a list of at least two vectors. + "Неверный ввод: вершины {} должны являться списком двух направлений". @@ -4967,12 +4967,12 @@ The final angle will be the base angle plus this amount. Неправильный ввод: должен быть список из двух элементов. Например, [object, 'Edge1']. - + Wrong input: point_object not in document. - Wrong input: point_object not in document. + "Неверный ввод: вершин (ы) нет в документе". - + Wrong input: object has the wrong type. Неверный ввод: объект имеет неверный тип. @@ -4989,13 +4989,13 @@ The final angle will be the base angle plus this amount. Wrong input: edge_object must not be a list or tuple. - Wrong input: edge_object must not be a list or tuple. + "Неверный ввод: ребро объекта не должно являться списком или кортежем". Wrong input: edge_object not in document. - Wrong input: edge_object not in document. + "Неверный ввод: ребра нет в документе". @@ -5299,9 +5299,9 @@ The final angle will be the base angle plus this amount. добавлено свойство 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' опция 'DisplayMode' переименована в 'World/Screen' @@ -5486,7 +5486,7 @@ from menu Tools -> Addon Manager Ошибка: модуль json не найден. Невзможно сохранить стиль - + Clone Клонировать @@ -5497,21 +5497,21 @@ from menu Tools -> Addon Manager Наклон - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Направление смещения не определено. Пожалуйста, сначала переместите мышку в любую сторону от объекта, чтобы указать направление - - + + True Да - - + + False Нет @@ -5548,7 +5548,7 @@ from menu Tools -> Addon Manager Copy - Копировать + Скопировать @@ -5604,7 +5604,7 @@ from menu Tools -> Addon Manager Draw style - Стиль представления + Стиль рисования @@ -5634,7 +5634,7 @@ from menu Tools -> Addon Manager Custom - Дополнительно + Произвольный @@ -5821,12 +5821,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Полилиния - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Создает линию с несколькими точками (ломаную линию). CTRL для привязки, SHIFT для ограничения. @@ -6100,12 +6100,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Переместить - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6131,12 +6131,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Дуга по 3 точкам - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Создаёт дугу окружности, выбрав 3 точки. @@ -6146,12 +6146,12 @@ CTRL для привязки, SHIFT для ограничения. Draft_ArcTools - + Arc tools Инструменты построения дуги - + Create various types of circular arcs. Создает различные типы круговых дуг. @@ -6187,7 +6187,7 @@ CTRL для привязки, SHIFT для ограничения. Edit - Редактировать + Правка @@ -6199,32 +6199,6 @@ on supported nodes and on supported objects. на поддерживаемых узлах и поддерживаемых объектах. - - Draft_AddPoint - - - Add point - Добавить точку - - - - Adds a point to an existing Wire or B-spline. - Добавить точку к существующей Ломаной линии или B-сплайну. - - - - Draft_DelPoint - - - Remove point - Удалить точку - - - - Removes a point from an existing Wire or B-spline. - Удаляет точку из существующей ломаной или B-сплайна. - - Draft_CircularArray @@ -6434,7 +6408,7 @@ If other objects are selected they are ignored. Polygon - Многоугольник, Полигон + Многоугольник @@ -7112,19 +7086,19 @@ set True for fusion or False for compound - + Create a face Создать грань + + - - The area of this object Площадь объекта @@ -7168,8 +7142,8 @@ set True for fusion or False for compound Базовый объект, который будет продублирован. - + The object along which the copies will be distributed. It must contain 'Edges'. Объект вдоль которого будут распространяться копии. Он должен содержать 'Рёбра'. @@ -7184,9 +7158,9 @@ set True for fusion or False for compound Коэффициент поворота закрученного массива. - - + + Show the individual array elements (only for Link arrays) Показать элементы массива (только для массивов ссылок) @@ -7311,8 +7285,8 @@ they will only be editable by changing the style through the 'Annotation style e При использовании стиля некоторые из свойств станут доступны только для чтения. Чтобы их изменить, отредактируйте стиль в 'Редакторе стилей Надписи'. - + The base object that will be duplicated Базовый объект, который будет дублироваться @@ -8113,14 +8087,14 @@ Use 'arch' to force US arch notation Используйте 'arch' для обозначения архитектурной США - + Arrow size Размер стрелки - + Arrow type Тип стрелки @@ -8183,7 +8157,7 @@ beyond the dimension line Draft - Осадка + Черновик diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 537cd67106..7af9d461be 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index 3989abac3c..6bc9a7747b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -658,7 +658,7 @@ To deluje le, če je "Vezana razpostavitev" izključena. Fuse - Združi + Zlij @@ -959,7 +959,7 @@ risanjem spremenite s tipkama [ in ] px - px + sl. točk @@ -1172,7 +1172,7 @@ v Gradniku velikosti pripisov. Če je merilo 1:100, je množilnik 100. Arrow size - Velikost puščic + Velikost puščice @@ -1544,7 +1544,6 @@ kateri bodo dodani med stalne vzorce Velikost pisave - @@ -1552,6 +1551,7 @@ kateri bodo dodani med stalne vzorce + mm mm @@ -1644,7 +1644,7 @@ v Gradniku velikosti pripisov. Če je merilo 1:100, je množilnik 100. Line width - Širina črte + Debelina črte @@ -1652,8 +1652,8 @@ v Gradniku velikosti pripisov. Če je merilo 1:100, je množilnik 100.Privzeta debelina črt - + px px @@ -1695,7 +1695,7 @@ v Gradniku velikosti pripisov. Če je merilo 1:100, je množilnik 100. Arrow size - Velikost puščice + Velikost puščic @@ -1972,9 +1972,9 @@ iz Upravljalnika dodatkov. Dovoli FreeCADu samodejni prenos in posodobitev knjižnic DXF - - + + Import options Možnosti uvoza @@ -2192,8 +2192,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Če je nastavljena na "0", bo celoten zlepek obravnavan ko raven odsek. - + Export options Možnosti izvoza @@ -2470,8 +2470,8 @@ Te so debelejše od ostalih mrežnih črt. To način, s kakršnim FreeCAD pretvori datoteke dwg v dxf. Če je izbrano "Samodejno", bo FreeCAD skušal poiskati enekga izmed sledečih pretvornikov v enakem vrstnem redu, kot so tukaj prikazani. Če FreeCAD ne more najti nobenega, boste morali izbrati določen pretvornik in določiti njegovo pot. Če uporabljate LibreDWG, izberite "dwg2dxf", "ODAFileConverter", če uporabljate pretvornik datotek ODA ali "dwg2dwg" orodje, če uporabljate profesionalno različico QCADa. - + Automatic Samodejno @@ -2748,7 +2748,7 @@ Te so debelejše od ostalih mrežnih črt. Global - Splošno + Obče @@ -2766,8 +2766,8 @@ Te so debelejše od ostalih mrežnih črt. - - + + @@ -3176,7 +3176,7 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi - + Rotate Zasukaj @@ -3199,7 +3199,7 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi - + Offset Odmik @@ -3392,59 +3392,59 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Nastavi merilo pripisnim orodjem izrisa - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Ni dejavnega dokumenta. Prekinjanje. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Novega predmeta ni mogoče vstaviti v prevelikosten del - + Symbol not implemented. Using a default symbol. Znak ni uveden. Uporabljanje privzetega znaka. - + image is Null slika je ničelna - + filename does not exist on the system or in the resource file imena datoteke ni v sistemu ali v mapi z viri - + unable to load texture ustroja ni mogoče naložiti - + Does not have 'ViewObject.RootNode'. Nima 'ViewObject.RootNode' (KorenskoVozlišče.PogledaPredmeta). @@ -3552,65 +3552,65 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite ciljno točko - + Create Label Ustvariti oznako - - + + Pick endpoint of leader line Izberite končno točko opisnične črte - - + + Pick text position Nastavi položaj besedila - - - + + + Pick first point Izberite prvo točko - + Create Line Ustvari črto - + Create Wire Ustvarite črtovje - + Polyline Črtovje - - - - - - - + + + + + + + Pick next point Izberite naslednjo točko - + Unable to create a Wire from selected objects Črtovja iz izbranih predmetov ni bilo mogoče ustvariti - + Convert to Wire Pretvori v črtovje @@ -3635,54 +3635,54 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite točko položaja - + Create Text Ustvari besedilo - + Select an object to convert. Izberite predmet za pretvorbo. - + Convert to Sketch Pretvori v očrt - + Convert to Draft Pretvori v izris (Draft) - + Convert Draft/Sketch Pretvori izris/očrt - + Select an object to move Izberite predmet, ki ga želite premakniti - + Pick start point Izberite začetno točko - - + + Pick end point Izberite končno točko - + Move Premakni - - + + Some subelements could not be moved. Nekaterih podprvin ni bilo mogoče premakniti. @@ -3693,75 +3693,75 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite središče - - - + + + - + Pick radius Izberi polmer - - - + + + Start angle Začetni kot - - + + Pick start angle Izberite začetni kot - - - + + + Aperture angle Središčni kot - + Pick aperture Izberite središčni kot - + Create Circle (Part) Ustvari krog (Del) - + Create Circle Ustvari krog - + Create Arc (Part) Ustvari lok (Del) - + Create Arc Ustvari lok - + Pick aperture angle Izberite središčni kot - - + + Arc by 3 points Lok iz 3 točk - + Create Arc by 3 points Create Arc by 3 points @@ -3771,7 +3771,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Preklopi mrežo - + Select an object to edit Izberite predmet, ki ga želite urejati @@ -3786,17 +3786,17 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Uredi vozlišče - + No edit point found for selected object Na izbranem predmetu ni mogoče najti nobene točke za urejanje - + Too many objects selected, max number set to: Izbranih je preveč predmetov, največje število je nastavljeno na: - + : this object is not editable : tega predmeta ni mogoče urejati @@ -3826,13 +3826,13 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Shrani datoteko slogov - + Select an object to project Izberite predmet za preslikavanje - - + + Create Point Ustvari točko @@ -3848,31 +3848,31 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. - + Base angle Izhodiščni kot - + The base angle you wish to start the rotation from Izhodiščni kót, iz katerega želite začeti sukanje - + Pick base angle Izberite izhodiščni kot - + Rotation Zasuk - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Koliko želite zasukati. @@ -3880,7 +3880,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. - + Pick rotation angle Izberite kót sukanja @@ -3985,12 +3985,12 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Mnogokotnik - + Create Polygon (Part) Ustvari mnogokotnik (Del) - + Create Polygon Ustvari mnogokotnik @@ -4000,7 +4000,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Kliknite kamor koli na črto, da jo presekate. - + Split line Presekaj črto @@ -4010,8 +4010,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Izberite predmete za prirezovanje/podaljšanje - + Pick distance Izberite razdaljo @@ -4051,14 +4051,14 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Zlepek je bil sklenjen - + Last point has been removed Zadnja točka je bila odstranjena - + Create B-spline Ustvari B-zlepek @@ -4220,14 +4220,14 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Elipsa - - + + Create Ellipse Ustvari elipso - - + + Pick opposite point Izberite nasprotno točko @@ -4320,25 +4320,25 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Mera - - - - + + + + Create Dimension Ustvari koto - + Create Dimension (radial) Ustvari koto (polmerno) - + Edge too short! Prekratek rob! - + Edges don't intersect! Robovi se ne sekajo! @@ -4368,12 +4368,12 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Izberite končno točko pomika - + Turning one Rectangle into a Wire Pretvori pravokotnik v črtovje - + Stretch Raztegni @@ -4383,12 +4383,12 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Pravokotnik - + Create Plane Ustvari ravnino - + Create Rectangle Ustvari pravokotnik @@ -4403,13 +4403,13 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Izberite začetno točko zrcalne črte - + Mirror Zrcali - - + + Pick end point of mirror line Izberite končno točko zrcalne črte @@ -4419,17 +4419,17 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Zvijajoča razpostavitev po poti - + Select an object to clone Izberite predmet za kloniranje - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4439,13 +4439,13 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Spremeni naklon - - + + Select an object to upgrade Izberite predmet, ki ga želite izpopolniti - + Upgrade Izpopolni @@ -4470,7 +4470,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Odmika Bezierjevih krivulj FreeCAD še ne podpira - + Create 2D view Ustvari 2D pogled @@ -4490,14 +4490,14 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Popravi - + Downgrade Popreprosti - - + + Task panel: Podokno nalog: @@ -4508,26 +4508,26 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Krožna razpostavitev - - + + At least one element must be selected. Izbrati morate vsaj eno prvino. - - + + Selection is not suitable for array. Izbor ni primeren za razpostavljanje. - - - - + + + + Object: Predmet: @@ -4547,16 +4547,16 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Kot je pod -360 stopinjami. Za nadaljevanje je nastavljen na to vrednost. - - + + Fuse: Združi: - - + + Create Link array: Ustvari vezano razpostavitev: @@ -4571,8 +4571,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Kót razpostavljanja: - + Center of rotation: Središče sukanja: @@ -4691,17 +4691,17 @@ Končni kót bo seštevek izhodiščnega in tega kóta. spremenjena vrsta lastnosti "Sledenje" - + ShapeString: oblique angle must be in the -80 to +80 degree range Besedilna oblika: kot poševnost mora biti v razponu od -80 do 80 stopinj - + ShapeString: string has no wires Besedilna oblika: niz je brez črtovij - + ShapeString: face creation failed for one character Besedilna oblika: pri enem znaku je ustvarjanje ploskve spodletelo @@ -4828,38 +4828,35 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Ni mogoče ustvariti oblike: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Napačen vnos: biti mora številka. - - - - + @@ -4869,18 +4866,21 @@ Končni kót bo seštevek izhodiščnega in tega kóta. - + + + + Wrong input: must be a vector. Napačen vnos: biti mora vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Napačen vnos: biti mora seznam ali sklop nizov ali en niz. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Napačen vnos: biti mora "Izvirno", "Frenet" ali "Dotikalno". @@ -4897,8 +4897,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Vnos: samostojna vrednost razširjena v vektor. - + Wrong input: must be an integer number. Napačen vnos: biti mora celo število. @@ -4912,7 +4912,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta. - + Wrong input: must be a placement, a vector, or a rotation. Napačen vnos: biti mora postavitev, vektor ali zasukanost. @@ -4977,12 +4977,12 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Napačen vnos: biti mora seznam dveh prvin. Npr. [predmet, "Rob1"]. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Napačen vnos: predmet je napačne vrste. @@ -5309,9 +5309,9 @@ Končni kót bo seštevek izhodiščnega in tega kóta. dodana lastnost pogleda "BarvaBesedila" - - + + renamed 'DisplayMode' options to 'World/Screen' možnosti "Prikaznega načina" preimenovane v "Obče/Zaslon" @@ -5498,7 +5498,7 @@ z menija Orodja -> Upravljalnik vstavkov Napaka: modula JSON ni mogoče najti. Sloga ni mogoče shraniti - + Clone Kloniraj @@ -5509,28 +5509,28 @@ z menija Orodja -> Upravljalnik vstavkov Naklon - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Smer odmika ni določena. S premikom kazalke na eno stran predmeta najprej nakažite smer - - + + True Je - - + + False Ni Scale - Povečava + Prevelikostenje @@ -5832,12 +5832,12 @@ upoštevan le prvi od vsakega. Draft_Wire - + Polyline Črtovje - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Ustvari večtočkovno črto (črtovje). CTRL za pripenjanje, PREMAKNI za omejitev. @@ -6111,12 +6111,12 @@ medtem ko bo en sam očrt z nepovezanimi sledmi pretvorjen v več posamičnih pr Draft_Move - + Move Premakni - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6143,12 +6143,12 @@ CTRL za pripenjanje, PREMAKNI za omejitev. Draft_Arc_3Points - + Arc by 3 points Lok iz 3 točk - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Ustvari krožni lok z določitvijo 3 točk. @@ -6158,12 +6158,12 @@ CTRL za pripenjanje, PREMAKNI za omejitev. Draft_ArcTools - + Arc tools Ločna orodja - + Create various types of circular arcs. Ustvari različne vrste krožnih lokov. @@ -6211,32 +6211,6 @@ on supported nodes and on supported objects. in podprtih predmetih, pritisnite E ali ALT+levi klik. - - Draft_AddPoint - - - Add point - Dodaj točko - - - - Adds a point to an existing Wire or B-spline. - Doda točko obstoječemu črtovju ali B-zlepku. - - - - Draft_DelPoint - - - Remove point - Odstrani točko - - - - Removes a point from an existing Wire or B-spline. - Odstrani točko iz obstoječega črtovja ali B-zlepka. - - Draft_CircularArray @@ -6331,7 +6305,7 @@ Create a group first to use this tool. Autogroup - Samodejno združevanje + Samozdruževanje @@ -7127,19 +7101,19 @@ vklopite, če želite združevanje oz. izklopite, če želite sestavljanje - + Create a face Ustvari ploskev + + - - The area of this object Površina tega predmeta @@ -7183,8 +7157,8 @@ vklopite, če želite združevanje oz. izklopite, če želite sestavljanjeIzhodiščni predmet, ki bo podvojen. - + The object along which the copies will be distributed. It must contain 'Edges'. Predmet, vzdolž katerega bodo razvrščeni dvojniki. Vsebovati mora "Robove". @@ -7199,9 +7173,9 @@ vklopite, če želite združevanje oz. izklopite, če želite sestavljanjeKoličnik sukanja pri zvijajoči razpostavitvi. - - + + Show the individual array elements (only for Link arrays) Pokaži posamezne predmete razpostavitve (le pri Vezanih razpostavitvah) @@ -7330,8 +7304,8 @@ they will only be editable by changing the style through the 'Annotation style e urediti jih bo mogoče le s spremembo sloga v orodju "Urejevalnik pripisnih slogov". - + The base object that will be duplicated Izhodiščni predmet, ki bo podvojen @@ -8128,14 +8102,14 @@ Use 'arch' to force US arch notation Če želite vsiliti anglosaški arhitekturni zapis, uporabite "arch" - + Arrow size Velikost puščice - + Arrow type Vrsta puščice @@ -8200,7 +8174,7 @@ preko kotnice Draft - Ugrez + Izris diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm index ba37d13733..3c85428e9b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm and b/src/Mod/Draft/Resources/translations/Draft_sr-CS.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts index d93cbe6707..517036224d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts @@ -554,7 +554,7 @@ Negativne vrednosti će dovesti do kopija proizvedenih u negativnom pravcu. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Ako je označeno, rezultujući objekti posle umnožavanja će biti spojeni ako se dodiruju. + Ako je čekirano, rezultujući objekti posle umnožavanja će biti spojeni ako se dodiruju. Ovo radi samo ako je "Umnožavanje veza" isključeno. @@ -566,7 +566,7 @@ Ovo radi samo ako je "Umnožavanje veza" isključeno. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Ako je označeno, rezultujući objekat će biti „Umnožavanje veza“ umesto običnog umnožavanja. + Ako je čekirano, rezultujući objekat će biti „Umnožavanje veza“ umesto običnog umnožavanja. Umnožavanje veza je efikasnije kada se napravi više kopija, ali se ne može spojiti zajedno. @@ -651,19 +651,19 @@ Promeni smer ose u uredniku osobina. If checked, the resulting objects in the array will be fused if they touch each other. This only works if "Link array" is off. - Ako je čekirano, rezultujući objekti posle umnožavanja će biti spojeni ako se dodiruju. + Ako je označeno, rezultujući objekti posle umnožavanja će biti spojeni ako se dodiruju. Ovo radi samo ako je "Umnožavanje veza" isključeno. Fuse - Spajanje + Unija If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - Ako je čekirano, rezultujući objekat će biti „Umnožavanje veza“ umesto običnog umnožavanja. + Ako je označeno, rezultujući objekat će biti „Umnožavanje veza“ umesto običnog umnožavanja. Umnožavanje veza je efikasnije kada se napravi više kopija, ali se ne može spojiti zajedno. @@ -959,7 +959,7 @@ promeniti korišćenjem tipki [ i ] tokom crtanja px - px + PX @@ -1085,12 +1085,12 @@ promeniti korišćenjem tipki [ i ] tokom crtanja Arrow - Strela + Strelica Tick - Otkucaj + Kosa crta @@ -1541,7 +1541,6 @@ pattern definitions to be added to the standard patterns Veličina fonta - @@ -1549,6 +1548,7 @@ pattern definitions to be added to the standard patterns + mm milimetar @@ -1650,8 +1650,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.Podrazumevana širina linije - + px px @@ -1678,12 +1678,12 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100. Arrow - Strelica + Strela Tick - Kosa crta + Otkucaj @@ -1973,9 +1973,9 @@ iz Menadžera dodataka. Dozvoli FreeCAD-u da automatski preuzima i ažurira DXF biblioteke - - + + Import options Podešavanja uvoza @@ -2193,8 +2193,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Ako je zadato na '0', ceo splajn se tretira kao ravni segment. - + Export options Podešavanja izvoza @@ -2471,8 +2471,8 @@ These lines are thicker than normal grid lines. Ovo je metod koji će FreeCAD koristiti za pretvaranje DWG datoteka u DXF. Ako se izabere „Automatski“, FreeCAD će pokušati da pronađe jedan od sledećih konvertera u istom redosledu kao što su prikazani ovde. Ako FreeCAD ne može da pronađe nijedan, možda ćeš morati da izabereš određeni konvertor i navedeš njegovu putanju ovde ispod. Izaberi uslužni program „dwg2dxf“ ako koristiš LibreDWG, „ODAFileConverter“ ako koristiš ODA converter datoteka ili „dwg2dwg“ uslužni program ako koristiš pro verziju QCAD-a. - + Automatic Automatski @@ -2767,8 +2767,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3069,7 +3069,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Undo - Poništi + Opozovi @@ -3157,7 +3157,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Line - Linija + Duž @@ -3176,7 +3176,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv - + Rotate Rotiraj @@ -3199,7 +3199,7 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv - + Offset Odmak @@ -3390,59 +3390,59 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Podesi razmeru koju koriste alati za Draft napomenu - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Nema aktivnog dokumenta. Obustavljanje. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Pogrešan unos: objekat {} nije u dokumentu. - + Unable to insert new object into a scaled part Nije moguće umetnuti novi objekat u skalirani deo - + Symbol not implemented. Using a default symbol. Simbol nije primenjen. Koristi se unapred zadati simbol. - + image is Null slika je prazna - + filename does not exist on the system or in the resource file naziv datoteke ne postoji na sistemu ili u resursnoj datoteci - + unable to load texture nije moguće učitati teksturu - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3515,7 +3515,7 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da. Wrong input: unknown document {} - Wrong input: unknown document {} + Pogrešan unos: nepoznat dokument {} @@ -3550,65 +3550,65 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Izaberi ciljnu tačku - + Create Label Napravi oznaku - - + + Pick endpoint of leader line Izaberi krajnju tačku pokazne linije - - + + Pick text position Izaberi položaj teksta - - - + + + Pick first point Izaberi prvu tačku - + Create Line - Napravi Liniju + Napravi duž - + Create Wire Napravi Žicu - + Polyline Izlomljena linija - - - - - - - + + + + + + + Pick next point Izaberi sledeću tačku - + Unable to create a Wire from selected objects Nije moguće napraviti žicu od izabranih objekata - + Convert to Wire Pretvori u Žicu @@ -3633,54 +3633,54 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Izaberi tačku položaja - + Create Text Napravi tekst - + Select an object to convert. Izaberi objekat koji želiš da konvertuješ. - + Convert to Sketch Pretvori u Skicu - + Convert to Draft Pretvori u Draft - + Convert Draft/Sketch Pretvori Draft/Skica - + Select an object to move Izaberi objekat koji želiš da pomeriš - + Pick start point Izaberi početnu tačku - - + + Pick end point Izaberi krajnju tačku - + Move Pomeri - - + + Some subelements could not be moved. Neki podelementi nisu mogli da se premeste. @@ -3691,77 +3691,77 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Izaberi centralnu tačku - - - + + + - + Pick radius Izaberi poluprečnik - - - + + + Start angle Početni ugao - - + + Pick start angle Izaberi početni ugao - - - + + + Aperture angle Krajnji ugao - + Pick aperture Izaberi krajnji ugao - + Create Circle (Part) Napravi kružnicu (Deo) - + Create Circle Napravi kružnicu - + Create Arc (Part) Napravi kružni luk (Deo) - + Create Arc Napravi kružni luk - + Pick aperture angle Izaberi krajnji ugao - - + + Arc by 3 points Kružni luk pomoću 3 tačke - + Create Arc by 3 points - Create Arc by 3 points + Napravi kružni luk pomoću 3 tačke @@ -3769,7 +3769,7 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Sakrij/Prikaži koordinatnu mrežu - + Select an object to edit Izaberi objekat za uređivanje @@ -3784,17 +3784,17 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Uredi spoj - + No edit point found for selected object Nije pronađena nijedna tačka za uređivanje na izabranom objektu - + Too many objects selected, max number set to: Izabrano je previše objekata, maksimalni broj je podešen na: - + : this object is not editable : ovaj objekat se ne može uređivati @@ -3824,13 +3824,13 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da.Sačuvaj datoteku sa stilovima - + Select an object to project Izaberi objekat koji želiš projiciraš - - + + Create Point Napravi tačku @@ -3846,31 +3846,31 @@ Da bi omogućio FreeCAD-u da preuzme ove biblioteke, odgovori sa Da. - + Base angle Početni ugao - + The base angle you wish to start the rotation from Početni ugao od kojeg želiš da započneš rotaciju - + Pick base angle Izaberi početni ugao - + Rotation Rotacija - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Veličina rotacije koju želiš da izvršiš. @@ -3878,7 +3878,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. - + Pick rotation angle Izaberi ugao rotacije @@ -3983,12 +3983,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Mnogougao - + Create Polygon (Part) Napravi mnogougao (Deo) - + Create Polygon Napravi mnogougao @@ -3998,7 +3998,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Klikni bilo gde na liniji da bi je podelio. - + Split line Podeli liniju @@ -4008,8 +4008,8 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Izaberi objekte koje hoćeš opseći ili produžiti - + Pick distance Izaberi rastojanje @@ -4049,14 +4049,14 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. B-Splajn je zatvoren - + Last point has been removed Poslednja tačka je uklonjena - + Create B-spline Napravi B-splajn krivu @@ -4218,14 +4218,14 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Elipsa - - + + Create Ellipse Napravi Elipsu - - + + Pick opposite point Izaberi suprotnu tačku @@ -4318,25 +4318,25 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Kota - - - - + + + + Create Dimension Napravi kotu - + Create Dimension (radial) Napravi Kotu (radijalnu) - + Edge too short! Ivica je prekratka! - + Edges don't intersect! Ivice se ne ukrštaju! @@ -4366,12 +4366,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Izaberi krajnju tačku linije pomeranja - + Turning one Rectangle into a Wire Pretvaranje jednog pravougaonika u žicu - + Stretch Razvuci @@ -4381,12 +4381,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Pravougaonik - + Create Plane Napravi Ravan - + Create Rectangle Napravi Pravougaonik @@ -4401,13 +4401,13 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Izaberi početnu tačku linije simetrije - + Mirror Simetrično preslikavanje - - + + Pick end point of mirror line Izaberi krajnju tačku linije simetrije @@ -4417,19 +4417,19 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Umnožavanje po putanji sa uvrtanjem - + Select an object to clone Izaberi objekat koji želiš da kloniraš - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Nije moguće klonirati objekte koji nemaju oblik, prekida se - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Nije moguće klonirati objekte koji nemaju oblik, preskače se @@ -4437,13 +4437,13 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Promeni nagib - - + + Select an object to upgrade Izaberi objekat koji želiš da sastaviš - + Upgrade Sastavi @@ -4468,7 +4468,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Odmak Bezjeovih krivih trenutno nije podržan - + Create 2D view Napravi 2D pogled @@ -4488,14 +4488,14 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Izleči - + Downgrade Rastavi - - + + Task panel: Panel zadataka: @@ -4506,26 +4506,26 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Polarno umnožavanje - - + + At least one element must be selected. Najmanje jedan elemenat mora biti izabran. - - + + Selection is not suitable for array. Izbor nije pogodan za umnožavanje. - - - - + + + + Object: Objekat: @@ -4545,16 +4545,16 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Ugao je ispod 360 stepeni. Podešeno je na ovu vrednost da bi se moglo nastaviti. - - + + Fuse: Unija: - - + + Create Link array: Napravi umnožavanje veza: @@ -4569,8 +4569,8 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Polarni ugao: - + Center of rotation: Centar rotacije: @@ -4689,17 +4689,17 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range Tekstualni oblik: ugao nagiba mora biti između -80 i +80 stepeni - + ShapeString: string has no wires Tekstualni oblik: znakovni niz nema žice - + ShapeString: face creation failed for one character TekstualniOblik: nije uspelo pravljenje stranice od jednog znaka @@ -4781,12 +4781,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Two objects are needed. - Two objects are needed. + Potrebna su dva elementa. One object is not valid. - One object is not valid. + Jedan objekt je nevažeći. @@ -4826,38 +4826,35 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Nije moguće generisati oblik: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Pogrešan unos: mora biti broj. - - - - + @@ -4867,18 +4864,21 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. - + + + + Wrong input: must be a vector. Pogrešan unos: mora biti vektor. - + Wrong input: must be a list or tuple of strings, or a single string. Pogrešan unos: mora biti lista, znakovni niz uređenih n-torki ili jedan niz znakova. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Pogrešan unos: mora biti 'Originalno', 'Frenet', ili 'Tangentno'. @@ -4895,8 +4895,8 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Ulaz: jedna vrednost proširena na vektor. - + Wrong input: must be an integer number. Pogrešan unos: mora biti ceo broj. @@ -4910,7 +4910,7 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. - + Wrong input: must be a placement, a vector, or a rotation. Pogrešan unos: mora biti položaj, vektor ili rotacija. @@ -4975,12 +4975,12 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. Pogrešan unos: mora biti lista od dva elementa. Na primer, [objekat, 'Ivica1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Pogrešan unos: objekat je pogrešnog tipa. @@ -5307,9 +5307,9 @@ Krajnji ugao će biti početni ugao plus ovaj iznos. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5496,7 +5496,7 @@ iz menija Alati/Menadžer dodataka Greška: json modul nije pronađen. Nije moguće sačuvati stil - + Clone Klon @@ -5507,21 +5507,21 @@ iz menija Alati/Menadžer dodataka Nagib - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Smer odmaka nije definisan. Pomeri miša na jednu ili drugu stranu objekta da bi označio pravac - - + + True Tačno - - + + False Netačno @@ -5791,7 +5791,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Label - Ime + Oznaka @@ -5820,23 +5820,23 @@ obezbeđivati informacija oznaci. Line - Linija + Duž Creates a 2-point line. CTRL to snap, SHIFT to constrain. - Pravi liniju pomoću 2 tačke. CTRL za hvatanje, SHIFT za ograničavanje. + Pravi duž pomoću 2 tačke. CTRL za hvatanje, SHIFT za ograničavanje. Draft_Wire - + Polyline Izlomljena linija - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Pravi liniju sa više tačaka (izlomljenu liniju). CTRL za hvatanje, SHIFT za ograničavanje. @@ -6110,12 +6110,12 @@ Međutim, jedna skica sa nespojenim elementima biće konvertovana u nekoliko poj Draft_Move - + Move Pomeri - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6142,12 +6142,12 @@ CTRL za hvatanje, SHIFT za ograničavanje. Draft_Arc_3Points - + Arc by 3 points Kružni luk pomoću 3 tačke - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Pravi kružni luk pomoću 3 tačke. @@ -6157,12 +6157,12 @@ CTRL za hvatanje, SHIFT za ograničavanje. Draft_ArcTools - + Arc tools Alatke za kružna lukove - + Create various types of circular arcs. Napravi različite vrste kružnih lukova. @@ -6210,32 +6210,6 @@ Pritisni E ili ALT+levi klik da bi prikazao kontekstni meni na podržanim spojevima i na podržanim objektima. - - Draft_AddPoint - - - Add point - Dodaj tačku - - - - Adds a point to an existing Wire or B-spline. - Dodaje tačku na postojeću žicu ili B-Splajn. - - - - Draft_DelPoint - - - Remove point - Ukloni tačku - - - - Removes a point from an existing Wire or B-spline. - Uklanja tačku iz postojeće žice ili B-Splajna. - - Draft_CircularArray @@ -6798,7 +6772,7 @@ a zatim nacrtaj liniju da odrediš rastojanje i pravac rastezanja. Mirrors the selected objects along a line defined by two points. - Simetrično preslikavanje izabranih objekata pomoću linije zadate pomoću dve tačke. + Simetrično preslikavanje izabranih objekata pomoću prave linije zadate pomoću dve tačke. @@ -7127,19 +7101,19 @@ podesi Tačno za uniju ili Netačno za sastavljeni objekat - + Create a face Napravi stranicu + + - - The area of this object Površina ovog objekta @@ -7183,8 +7157,8 @@ podesi Tačno za uniju ili Netačno za sastavljeni objekat Bazni objekat koji će biti dupliran. - + The object along which the copies will be distributed. It must contain 'Edges'. Objekat duž kojeg će se kopije raspoređivati. Mora da sadrži 'Ivice'. @@ -7199,9 +7173,9 @@ podesi Tačno za uniju ili Netačno za sastavljeni objekat Koeficijent rotacije Umnožavanja po putanji sa uvrtanjem. - - + + Show the individual array elements (only for Link arrays) Prikaži pojedinačne elemente umnožavanja (samo za umnožavanje veza) @@ -7329,8 +7303,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated Bazni objekat koji će biti dupliran @@ -7700,12 +7674,12 @@ Ova osobina je samo za čitanje, pošto broj zavisi od tačaka u tačkastom obje The end point of this line. - Krajnja tačka ove linije. + Krajnja tačka duži. The length of this line. - Dužina ove linije. + Dužina duži. @@ -7924,17 +7898,17 @@ svojstva 'Početni ugao' i 'Krajnji ugao'. The start point of this line - Početna tačka ove linije + Početna tačka duži The end point of this line - Krajnja tačka ove linije + Krajnja tačka duži The length of this line - Dužina ove linije + Dužina duži @@ -8132,14 +8106,14 @@ Ostavi prazno za podrazumevane merne jedinice. Koristi 'arch' da bi prinudio na Građevinski US - + Arrow size Veličina strelice - + Arrow type Vrsta strelice @@ -8203,7 +8177,7 @@ iznad kotne linije Draft - Zakošenje + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index 39a1ae164c..04fbd9c584 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 39e8271927..32e3437f86 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -1541,7 +1541,6 @@ pattern definitions to be added to the standard patterns Величина фонта - @@ -1549,6 +1548,7 @@ pattern definitions to be added to the standard patterns + mm мм @@ -1650,8 +1650,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.Подразумевана ширина линије - + px px @@ -1973,9 +1973,9 @@ from the Addon Manager. Дозволите FreeCAD-у да аутоматски преузима и ажурира DXF библиотеке - - + + Import options Поставке увоза @@ -2193,8 +2193,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Ако је задато на '0', цео сплајн се третира као равни сегмент. - + Export options Опције извоза @@ -2471,8 +2471,8 @@ These lines are thicker than normal grid lines. Ово је метод који ће FreeCAD користити за претварање DWG датотека у DXF. Ако се изабере „Аутоматски“, FreeCAD ће покушати да пронађе један од следећих конвертера у истом редоследу као што су приказани овде. Ако FreeCAD не може да пронађе ниједан, можда ћеш морати да изабереш одређени конвертор и наведеш његову путању овде испод. Изабери услужни програм „dwg2dxf“ ако користиш LibreDWG, „ODAFileConverter“ ако користиш ОДА converter датотека или „dwg2dwg“ услужни програм ако користиш про верзију QCAD-а. - + Automatic Аутоматски @@ -2767,8 +2767,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3157,7 +3157,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Line - Линија + Дуж @@ -3176,7 +3176,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Ротирај @@ -3199,7 +3199,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Одмак @@ -3390,59 +3390,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Подеси размеру коју користе алати за Draft напомену - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. Нема активног документа. Обустављање. - + Wrong input: object {} not in document. - Wrong input: object {} not in document. + Погрешан унос: објекат {} није у документу. - + Unable to insert new object into a scaled part Није могуће уметнути нови објекат у скалирани део - + Symbol not implemented. Using a default symbol. Симбол није примењен. Користи се унапред задати симбол. - + image is Null слика је празна - + filename does not exist on the system or in the resource file назив датотеке не постоји на систему или у ресурсној датотеци - + unable to load texture није могуће учитати текстуру - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3515,7 +3515,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: unknown document {} - Wrong input: unknown document {} + Погрешан унос: непознат документ {} @@ -3550,65 +3550,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Изабери циљну тачку - + Create Label Направи ознаку - - + + Pick endpoint of leader line Изабери крајњу тачку показне линије - - + + Pick text position Изабери положај текста - - - + + + Pick first point Изабери прву тачку - + Create Line - Направи Линију + Направи дуж - + Create Wire Направи Жицу - + Polyline Изломљена линија - - - - - - - + + + + + + + Pick next point Изабери следећу тачку - + Unable to create a Wire from selected objects Није могуће направити жицу од изабраних објеката - + Convert to Wire Претвори у Жицу @@ -3633,54 +3633,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Изабери тачку локације - + Create Text Направи текст - + Select an object to convert. Изабери објекат који желиш да конвертујеш. - + Convert to Sketch Претвори у Скицу - + Convert to Draft Претвори у Draft - + Convert Draft/Sketch Претвори Draft/Скица - + Select an object to move Изабери објекат који желиш да помериш - + Pick start point Изабери почетну тачку - - + + Pick end point Изабери крајњу тачку - + Move Помери - - + + Some subelements could not be moved. Неки поделементи нису могли да се преместе. @@ -3691,77 +3691,77 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Изабери централну тачку - - - + + + - + Pick radius Изабери полупречник - - - + + + Start angle Почетни угао - - + + Pick start angle Изабери почетни угао - - - + + + Aperture angle Крајњи угао - + Pick aperture Изабери крајњи угао - + Create Circle (Part) Направи кружницу (Део) - + Create Circle Направи кружницу - + Create Arc (Part) Направи кружни лук (Део) - + Create Arc Направи кружни лук - + Pick aperture angle Изабери крајњи угао - - + + Arc by 3 points Кружни лук помоћу 3 тачке - + Create Arc by 3 points - Create Arc by 3 points + Направи кружни лук помоћу 3 тачке @@ -3769,7 +3769,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Сакриј/Прикажи координатну мрежу - + Select an object to edit Изабери објекат за уређивање @@ -3784,17 +3784,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Уреди спој - + No edit point found for selected object Није пронађена ниједна тачка за уређивање на изабраном објекту - + Too many objects selected, max number set to: Изабрано је превише објеката, максимални број је подешен на: - + : this object is not editable : овај објекат се не може уређивати @@ -3824,13 +3824,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Сачувај датотеку са стиловима - + Select an object to project Изабери објекат који желиш да пројицираш - - + + Create Point Направи тачку @@ -3846,31 +3846,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle Почетни угао - + The base angle you wish to start the rotation from Почетни угао од којег желиш да започнеш ротацију - + Pick base angle Изабери почетни угао - + Rotation Ротација - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. Величина ротације коју желиш да извршиш. @@ -3878,7 +3878,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Изабери угао ротације @@ -3983,12 +3983,12 @@ The final angle will be the base angle plus this amount. Многоугао - + Create Polygon (Part) Направи многоугао (део) - + Create Polygon Направи многоугао @@ -3998,7 +3998,7 @@ The final angle will be the base angle plus this amount. Кликни било где на линији да би је поделио. - + Split line Подели линију @@ -4008,8 +4008,8 @@ The final angle will be the base angle plus this amount. Изабери објекте које хоћеш опсећи или продужити - + Pick distance Изабери растојање @@ -4049,14 +4049,14 @@ The final angle will be the base angle plus this amount. Б-Сплајн је затворен - + Last point has been removed Последња тачка је уклоњена - + Create B-spline Направи Б-сплајн криву @@ -4218,14 +4218,14 @@ The final angle will be the base angle plus this amount. Елипса - - + + Create Ellipse Направи Елипсу - - + + Pick opposite point Изабери супротну тачку @@ -4318,25 +4318,25 @@ The final angle will be the base angle plus this amount. Кота - - - - + + + + Create Dimension Направи коту - + Create Dimension (radial) Направи Коту (радијалну) - + Edge too short! Ивица је прекратка! - + Edges don't intersect! Ивице се не укрштају! @@ -4366,12 +4366,12 @@ The final angle will be the base angle plus this amount. Изабери крајњу тачку линије померања - + Turning one Rectangle into a Wire Претварање једног правоугаоника у жицу - + Stretch Развуци @@ -4381,12 +4381,12 @@ The final angle will be the base angle plus this amount. Правоугаоник - + Create Plane Направи Раван - + Create Rectangle Направи Правоугаоник @@ -4401,13 +4401,13 @@ The final angle will be the base angle plus this amount. Изабери почетну тачку линије симетрије - + Mirror Симетрично пресликавање - - + + Pick end point of mirror line Изабери крајњу тачку линије симетрије @@ -4417,19 +4417,19 @@ The final angle will be the base angle plus this amount. Умножавање по путањи са увртањем - + Select an object to clone Изабери објекат који желиш да клонираш - + Cannot clone object(s) without a Shape, aborting - Cannot clone object(s) without a Shape, aborting + Није могуће клонирати објекте који немају облик, прекида се - + Cannot clone object(s) without a Shape, skipping them - Cannot clone object(s) without a Shape, skipping them + Није могуће клонирати објекте који немају облик, прескаче се @@ -4437,13 +4437,13 @@ The final angle will be the base angle plus this amount. Промени нагиб - - + + Select an object to upgrade Изабери објекат који желиш да саставиш - + Upgrade Састави @@ -4468,7 +4468,7 @@ The final angle will be the base angle plus this amount. Одмак Безјеових кривих тренутно није подржан - + Create 2D view Направи 2D поглед @@ -4488,14 +4488,14 @@ The final angle will be the base angle plus this amount. Излечи - + Downgrade Растави - - + + Task panel: Панел задатака: @@ -4506,26 +4506,26 @@ The final angle will be the base angle plus this amount. Поларно умножавање - - + + At least one element must be selected. Најмање један елемент мора бити изабран. - - + + Selection is not suitable for array. Избор није погодан за умножавање. - - - - + + + + Object: Објекат: @@ -4545,16 +4545,16 @@ The final angle will be the base angle plus this amount. Угао је испод -360 степени. Подешено је на ову вредност да би се могло наставити. - - + + Fuse: Унија: - - + + Create Link array: Направи умножавање веза: @@ -4569,8 +4569,8 @@ The final angle will be the base angle plus this amount. Поларни угао: - + Center of rotation: Центар ротације: @@ -4689,17 +4689,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range Текстуални облик: угао нагиба мора бити између -80 и +80 степени - + ShapeString: string has no wires Текстуални облик: знаковни низ нема жице - + ShapeString: face creation failed for one character ТекстуалниОблик: није успело прављење странице од једног знака @@ -4781,12 +4781,12 @@ The final angle will be the base angle plus this amount. Two objects are needed. - Two objects are needed. + Потребна су два елемента. One object is not valid. - One object is not valid. + Један објект је неважећи. @@ -4826,38 +4826,35 @@ The final angle will be the base angle plus this amount. Није могуће генерисати облик: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Погрешан унос: мора бити број. - - - - + @@ -4867,18 +4864,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Погрешан унос: мора бити вектор. - + Wrong input: must be a list or tuple of strings, or a single string. Погрешан унос: мора бити листа, знаковни низ уређених н-торки или један низ знакова. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Погрешан унос: мора бити 'Оригинално', 'Френет', или 'Тангентно'. @@ -4895,8 +4895,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Погрешан унос: мора бити цео број. @@ -4910,7 +4910,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Погрешан унос: мора бити положај, вектор или ротација. @@ -4975,12 +4975,12 @@ The final angle will be the base angle plus this amount. Погрешан унос: мора бити листа од два елемента. На пример, [објекат, 'Ивица1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Погрешан унос: објекат је погрешног типа. @@ -5307,9 +5307,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5496,7 +5496,7 @@ from menu Tools -> Addon Manager Грешка: јсон модул није пронађен. Није могуће сачувати стил - + Clone Клон @@ -5507,21 +5507,21 @@ from menu Tools -> Addon Manager Нагиб - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Смер одмака није дефинисан. Помери миша на једну или другу страну објекта да би означио правац - - + + True Тачно - - + + False Нетачно @@ -5791,7 +5791,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Label - Име + Ознака @@ -5820,23 +5820,23 @@ will be used to provide information to the label. Line - Линија + Дуж Creates a 2-point line. CTRL to snap, SHIFT to constrain. - Прави линију помоћу 2 тачке. CTRL за хватање, SHIFT за ограничавање. + Прави дуж помоћу 2 тачке. CTRL за хватање, SHIFT за ограничавање. Draft_Wire - + Polyline Изломљена линија - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Прави линију са више тачака (изломљену линију). CTRL за хватање, SHIFT за ограничавање. @@ -6110,12 +6110,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Помери - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6142,12 +6142,12 @@ CTRL за хватање, SHIFT за ограничавање. Draft_Arc_3Points - + Arc by 3 points Кружни лук помоћу 3 тачке - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Прави кружни лук помоћу 3 тачке. @@ -6157,12 +6157,12 @@ CTRL за хватање, SHIFT за ограничавање. Draft_ArcTools - + Arc tools Алатке за кружна лукове - + Create various types of circular arcs. Направи различите врсте кружних лукова. @@ -6198,7 +6198,7 @@ CTRL за хватање, SHIFT за ограничавање. Edit - Уреди + Измени @@ -6210,32 +6210,6 @@ on supported nodes and on supported objects. на подржаним спојевима и на подржаним објектима. - - Draft_AddPoint - - - Add point - Додај тачку - - - - Adds a point to an existing Wire or B-spline. - Додаје тачку на постојећу жицу или Б-Сплајн. - - - - Draft_DelPoint - - - Remove point - Уклони тачку - - - - Removes a point from an existing Wire or B-spline. - Уклања тачку из постојеће жице или Б-Сплајна. - - Draft_CircularArray @@ -6798,7 +6772,7 @@ then draw a line to specify the distance and direction of stretching. Mirrors the selected objects along a line defined by two points. - Симетрично пресликавање изабраних објеката помоћу линије задате помоћу две тачке. + Симетрично пресликавање изабраних објеката помоћу праве линије задате помоћу две тачке. @@ -7127,19 +7101,19 @@ set True for fusion or False for compound - + Create a face Направи страницу + + - - The area of this object Површина овог објекта @@ -7183,8 +7157,8 @@ set True for fusion or False for compound Базни објекат који ће бити дуплиран. - + The object along which the copies will be distributed. It must contain 'Edges'. Објекат дуж којег ће се копије распоређивати. Мора да садржи 'Ивице'. @@ -7199,9 +7173,9 @@ set True for fusion or False for compound Коефицијент ротације Умножавања по путањи са увртањем. - - + + Show the individual array elements (only for Link arrays) Прикажи појединачне елементе умножавања (само за умножавање веза) @@ -7329,8 +7303,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated Базни објекат који ће бити дуплиран @@ -7695,17 +7669,17 @@ This property is read-only, as the number depends on the points in 'Point Object The start point of this line. - Почетна тачка ове линије. + Почетна тачка дужи. The end point of this line. - Крајња тачка ове линије. + Крајња тачка дужи. The length of this line. - Дужина ове линије. + Дужина дужи. @@ -7924,17 +7898,17 @@ the 'First Angle' and 'Last Angle' properties. The start point of this line - Почетна тачка ове линије + Почетна тачка дужи The end point of this line - Крајња тачка ове линије + Крајња тачка дужи The length of this line - Дужина ове линије + Дужина дужи @@ -8132,14 +8106,14 @@ Use 'arch' to force US arch notation Користи 'arch' да би принудио на Грађевински US - + Arrow size Величина стрелице - + Arrow type Врста стрелице @@ -8203,7 +8177,7 @@ beyond the dimension line Draft - Закошење + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 667d6274e6..72a448b526 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index eb8c79ee75..50c909c270 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -1546,7 +1546,6 @@ pattern definitions to be added to the standard patterns Teckenstorlek - @@ -1554,6 +1553,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1654,8 +1654,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1976,9 +1976,9 @@ från Addon Manager. Tillåt FreeCAD att automatiskt hämta och uppdatera DXF-biblioteken - - + + Import options Importeringsalternativ @@ -2195,8 +2195,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Om den är satt till '0' så behandlas hela splinen som ett rakt segment. - + Export options Alternativ för exportering @@ -2473,8 +2473,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automatisk @@ -2769,8 +2769,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3179,7 +3179,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Rotera @@ -3202,7 +3202,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Offset @@ -3395,59 +3395,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture kan inte ladda textur - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3555,65 +3555,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Välj målpunkt - + Create Label Skapa etikett - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Välj textplacering - - - + + + Pick first point Välj första punkt - + Create Line Skapa linje - + Create Wire Create Wire - + Polyline Polylinje - - - - - - - + + + + + + + Pick next point Välj nästa punkt - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3638,54 +3638,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Välj placeringspunkt - + Create Text Skapa text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Konvertera till skiss - + Convert to Draft Konvertera till utkast - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Välj ett objekt att flytta - + Pick start point Välj startpunkt - - + + Pick end point Välj slutpunkt - + Move Flytta - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3696,75 +3696,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Välj radie - - - + + + Start angle Startvinkel - - + + Pick start angle Välj startvinkel - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Skapa cirkel - + Create Arc (Part) Create Arc (Part) - + Create Arc Skapa båge - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3774,7 +3774,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Växla rutnät - + Select an object to edit Välj ett objekt att redigera @@ -3789,17 +3789,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Redigera nod - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3829,13 +3829,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Spara stilfil - + Select an object to project Välj ett objekt att projicera - - + + Create Point Skapa punkt @@ -3851,31 +3851,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Basvinkel - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Välj basvinkel - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3883,7 +3883,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3988,12 +3988,12 @@ The final angle will be the base angle plus this amount. Polygon - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Skapa polygon @@ -4003,7 +4003,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4013,8 +4013,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Välj avstånd @@ -4054,14 +4054,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Skapa B-spline @@ -4223,14 +4223,14 @@ The final angle will be the base angle plus this amount. Ellips - - + + Create Ellipse Skapa ellips - - + + Pick opposite point Pick opposite point @@ -4323,25 +4323,25 @@ The final angle will be the base angle plus this amount. Dimension - - - - + + + + Create Dimension Skapa dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Kant för kort! - + Edges don't intersect! Edges don't intersect! @@ -4371,12 +4371,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4386,12 +4386,12 @@ The final angle will be the base angle plus this amount. Rektangel - + Create Plane Skapa plan - + Create Rectangle Skapa rektangel @@ -4406,13 +4406,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Spegel - - + + Pick end point of mirror line Pick end point of mirror line @@ -4422,17 +4422,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Välj ett objekt att klona - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4442,13 +4442,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Välj ett objekt att uppgradera - + Upgrade Uppgradera @@ -4473,7 +4473,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Skapa 2D-vy @@ -4493,14 +4493,14 @@ The final angle will be the base angle plus this amount. Läk - + Downgrade Nedgradera - - + + Task panel: Task panel: @@ -4511,26 +4511,26 @@ The final angle will be the base angle plus this amount. Polär matris - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Objekt: @@ -4550,16 +4550,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4574,8 +4574,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4694,17 +4694,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4831,38 +4831,35 @@ The final angle will be the base angle plus this amount. Kan inte generera form: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4872,18 +4869,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4900,8 +4900,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4915,7 +4915,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4980,12 +4980,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5312,9 +5312,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5501,7 +5501,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Klon @@ -5512,21 +5512,21 @@ from menu Tools -> Addon Manager Lutning - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Sant - - + + False Falskt @@ -5836,12 +5836,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polylinje - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6115,12 +6115,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Flytta - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6147,12 +6147,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6162,12 +6162,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Bågverktyg - + Create various types of circular arcs. Create various types of circular arcs. @@ -6215,32 +6215,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Lägg till punkt - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Ta bort punkt - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7132,19 +7106,19 @@ set True for fusion or False for compound - + Create a face Skapa en yta + + - - The area of this object The area of this object @@ -7188,8 +7162,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7204,9 +7178,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7335,8 +7309,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8139,14 +8113,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Pilstorlek - + Arrow type Piltyp diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 54929f857b..9e5616cab6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index aac42e487f..d03873fb09 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -1547,7 +1547,6 @@ pattern definitions to be added to the standard patterns Yazı Boyutu - @@ -1555,6 +1554,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1655,8 +1655,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px piksel @@ -1977,9 +1977,9 @@ Bu işlemi Eklenti Yöneticisi' nden "dxf_library" tezgahını yükleyerek elle FreeCAD'in DXF kitaplıklarını otomatik olarak indirmesine ve güncellemesine izin ver - - + + Import options İçe aktarım seçenekleri @@ -2196,8 +2196,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Her çoklu çizginin her bir parçasının en büyük uzunluğu, eğer değeri 0 olarak atanır ise her parça düz olur. - + Export options Dışa aktarım seçenekleri @@ -2474,8 +2474,8 @@ These lines are thicker than normal grid lines. Bu yöntem FreeCAD'in, DWG dosyalarını DXF'ye dönüştürmede kullanacağı yöntemdir. "Otomatik" seçiliyse, FreeCAD aşağıdaki dönüştürücülerden birini burada gösterildikleri aynı sırayla bulmayı deneyecektir. Eğer FreeCAD herhangi birini bulamazsa, özel bir dönüştürücü seçmeniz ve yolunu burada altta belirtmeniz gerekecektir. LibreDWG kullanıyorsanız "dwg2dxf" yazılımını, ODA dosya dönüştürücü kullanıyorsanız "ODAFileConverter"ı ya da QCAD'in pro sürümünü kullanıyorsanız "dwg2dwg" yazılımını seçin. - + Automatic Otomatik @@ -2770,8 +2770,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3180,7 +3180,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Döndür @@ -3203,7 +3203,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Uzaklaşma @@ -3396,59 +3396,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3556,65 +3556,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3639,54 +3639,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Taşı - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3697,75 +3697,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3775,7 +3775,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3790,17 +3790,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3830,13 +3830,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3852,31 +3852,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3884,7 +3884,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3989,12 +3989,12 @@ The final angle will be the base angle plus this amount. Çokgen - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4004,7 +4004,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4014,8 +4014,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4055,14 +4055,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline B-spline'ı yarat @@ -4224,14 +4224,14 @@ The final angle will be the base angle plus this amount. Elips - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4324,25 +4324,25 @@ The final angle will be the base angle plus this amount. Boyut - - - - + + + + Create Dimension Ölçü Oluştur - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4372,12 +4372,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4387,12 +4387,12 @@ The final angle will be the base angle plus this amount. Dikdörtgen - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4407,13 +4407,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4423,17 +4423,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4443,13 +4443,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4474,7 +4474,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4494,14 +4494,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4512,26 +4512,26 @@ The final angle will be the base angle plus this amount. Kutupsal dizi - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4551,16 +4551,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4575,8 +4575,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4695,17 +4695,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4832,38 +4832,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4873,18 +4870,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4901,8 +4901,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4981,12 +4981,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5313,9 +5313,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5502,7 +5502,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Klon @@ -5513,21 +5513,21 @@ from menu Tools -> Addon Manager Eğim - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Doğru - - + + False Yanlış @@ -5837,12 +5837,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6116,12 +6116,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Taşı - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6148,12 +6148,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6163,12 +6163,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6216,32 +6216,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7133,19 +7107,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7189,8 +7163,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7205,9 +7179,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7336,8 +7310,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8140,14 +8114,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Ok boyu - + Arrow type Ok tipi diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 15842091d6..bb13081392 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index 4656c05e1a..ccb7751485 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -1546,7 +1546,6 @@ pattern definitions to be added to the standard patterns Розмір шрифту - @@ -1554,6 +1553,7 @@ pattern definitions to be added to the standard patterns + mm мм @@ -1654,8 +1654,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px пікс. @@ -1976,9 +1976,9 @@ from the Addon Manager. Дозволити FreeCAD автоматично завантажувати та оновлювати DXF-бібліотеки - - + + Import options Налаштування імпорту @@ -2196,8 +2196,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Якщо значення встановлено у «0», весь сплайн розглядається як прямий сегмент. - + Export options Налаштування експорту @@ -2474,8 +2474,8 @@ These lines are thicker than normal grid lines. Цей метод FreeCAD використовуватиме для перетворення DWG файлів у DXF. Якщо вибрано "Автоматично", то FreeCAD буде шукати один з наступних перетворювачів у тому ж порядку, як і показано тут. Якщо FreeCAD не в змозі знайти когось, вам, можливо, потрібно вибрати конкретний перетворювач та вказати його шлях тут нижче. Виберіть утиліту "dwg2dxf", якщо використовуєте LibreDWG, "ODAFileConverter" якщо використовується інструмент перетворення файлів ODA або утиліта "dwg2dwg", якщо використовується пробна версія QCAD. - + Automatic Автоматичний @@ -2770,8 +2770,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3180,7 +3180,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Обертання @@ -3203,7 +3203,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Зміщення @@ -3396,59 +3396,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3556,65 +3556,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3639,54 +3639,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Переміщення - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3697,75 +3697,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3775,7 +3775,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3790,17 +3790,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3830,13 +3830,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3852,31 +3852,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3884,7 +3884,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3989,12 +3989,12 @@ The final angle will be the base angle plus this amount. Багатокутник - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -4004,7 +4004,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -4014,8 +4014,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4055,14 +4055,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Створити B-сплайн @@ -4224,14 +4224,14 @@ The final angle will be the base angle plus this amount. Еліпс - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4324,25 +4324,25 @@ The final angle will be the base angle plus this amount. Розмірність - - - - + + + + Create Dimension Створити розмір - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4372,12 +4372,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4387,12 +4387,12 @@ The final angle will be the base angle plus this amount. Прямокутник - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4407,13 +4407,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4423,17 +4423,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4443,13 +4443,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4474,7 +4474,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4494,14 +4494,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4512,26 +4512,26 @@ The final angle will be the base angle plus this amount. Полярний масив - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4551,16 +4551,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4575,8 +4575,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4695,17 +4695,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4832,38 +4832,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4873,18 +4870,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4901,8 +4901,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4916,7 +4916,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4981,12 +4981,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5313,9 +5313,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5502,7 +5502,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Клонувати @@ -5513,21 +5513,21 @@ from menu Tools -> Addon Manager Нахил - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Так - - + + False Ні @@ -5837,12 +5837,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6116,12 +6116,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Переміщення - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6148,12 +6148,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6163,12 +6163,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6216,32 +6216,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7133,19 +7107,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7189,8 +7163,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7205,9 +7179,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7336,8 +7310,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8140,14 +8114,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Розмір стрілки - + Arrow type Тип стрілки diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index 1666d91f05..c0b482922c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 2d22e30de4..d70daef511 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -1539,7 +1539,6 @@ pattern definitions to be added to the standard patterns Mida del tipus de lletra - @@ -1547,6 +1546,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1647,8 +1647,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1967,9 +1967,9 @@ del gestor de complements. Permeten que FreeCAD descarregue i actualitze automàticament les biblioteques DXF - - + + Import options Opcions d'importació @@ -2179,8 +2179,8 @@ If it is set to '0' the whole spline is treated as a straight segment. Longitud màxima de cadascun dels segments de la polilínia. Si s'estableix en «0», l'spline sencer es tracta com un segment recte. - + Export options Opcions d'exportació @@ -2457,8 +2457,8 @@ These lines are thicker than normal grid lines. This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - + Automatic Automàtica @@ -2753,8 +2753,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3163,7 +3163,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate Gira @@ -3186,7 +3186,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset Separació @@ -3379,59 +3379,59 @@ To enabled FreeCAD to download these libraries, answer Yes. Set the scale used by draft annotation tools - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. No active document. Aborting. - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part Unable to insert new object into a scaled part - + Symbol not implemented. Using a default symbol. Symbol not implemented. Using a default symbol. - + image is Null image is Null - + filename does not exist on the system or in the resource file filename does not exist on the system or in the resource file - + unable to load texture unable to load texture - + Does not have 'ViewObject.RootNode'. Does not have 'ViewObject.RootNode'. @@ -3539,65 +3539,65 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick target point - + Create Label Create Label - - + + Pick endpoint of leader line Pick endpoint of leader line - - + + Pick text position Pick text position - - - + + + Pick first point Pick first point - + Create Line Create Line - + Create Wire Create Wire - + Polyline Polyline - - - - - - - + + + + + + + Pick next point Pick next point - + Unable to create a Wire from selected objects Unable to create a Wire from selected objects - + Convert to Wire Convert to Wire @@ -3622,54 +3622,54 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick location point - + Create Text Create Text - + Select an object to convert. Select an object to convert. - + Convert to Sketch Convert to Sketch - + Convert to Draft Convert to Draft - + Convert Draft/Sketch Convert Draft/Sketch - + Select an object to move Select an object to move - + Pick start point Pick start point - - + + Pick end point Pick end point - + Move Mou - - + + Some subelements could not be moved. Some subelements could not be moved. @@ -3680,75 +3680,75 @@ To enabled FreeCAD to download these libraries, answer Yes. Pick center point - - - + + + - + Pick radius Pick radius - - - + + + Start angle Start angle - - + + Pick start angle Pick start angle - - - + + + Aperture angle Aperture angle - + Pick aperture Pick aperture - + Create Circle (Part) Create Circle (Part) - + Create Circle Create Circle - + Create Arc (Part) Create Arc (Part) - + Create Arc Create Arc - + Pick aperture angle Pick aperture angle - - + + Arc by 3 points Arc by 3 points - + Create Arc by 3 points Create Arc by 3 points @@ -3758,7 +3758,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Toggle grid - + Select an object to edit Select an object to edit @@ -3773,17 +3773,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Edit node - + No edit point found for selected object No edit point found for selected object - + Too many objects selected, max number set to: Too many objects selected, max number set to: - + : this object is not editable : this object is not editable @@ -3813,13 +3813,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Save styles file - + Select an object to project Select an object to project - - + + Create Point Create Point @@ -3835,31 +3835,31 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Base angle Base angle - + The base angle you wish to start the rotation from The base angle you wish to start the rotation from - + Pick base angle Pick base angle - + Rotation Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. The amount of rotation you wish to perform. @@ -3867,7 +3867,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle Pick rotation angle @@ -3972,12 +3972,12 @@ The final angle will be the base angle plus this amount. Polygon - + Create Polygon (Part) Create Polygon (Part) - + Create Polygon Create Polygon @@ -3987,7 +3987,7 @@ The final angle will be the base angle plus this amount. Click anywhere on a line to split it. - + Split line Split line @@ -3997,8 +3997,8 @@ The final angle will be the base angle plus this amount. Select objects to trim or extend - + Pick distance Pick distance @@ -4038,14 +4038,14 @@ The final angle will be the base angle plus this amount. Spline has been closed - + Last point has been removed Last point has been removed - + Create B-spline Crea un B-spline @@ -4207,14 +4207,14 @@ The final angle will be the base angle plus this amount. El·lipse - - + + Create Ellipse Create Ellipse - - + + Pick opposite point Pick opposite point @@ -4307,25 +4307,25 @@ The final angle will be the base angle plus this amount. Dimensió - - - - + + + + Create Dimension Create Dimension - + Create Dimension (radial) Create Dimension (radial) - + Edge too short! Edge too short! - + Edges don't intersect! Edges don't intersect! @@ -4355,12 +4355,12 @@ The final angle will be the base angle plus this amount. Pick end point of displacement - + Turning one Rectangle into a Wire Turning one Rectangle into a Wire - + Stretch Stretch @@ -4370,12 +4370,12 @@ The final angle will be the base angle plus this amount. Rectangle - + Create Plane Create Plane - + Create Rectangle Create Rectangle @@ -4390,13 +4390,13 @@ The final angle will be the base angle plus this amount. Pick start point of mirror line - + Mirror Mirror - - + + Pick end point of mirror line Pick end point of mirror line @@ -4406,17 +4406,17 @@ The final angle will be the base angle plus this amount. Path twisted array - + Select an object to clone Select an object to clone - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4426,13 +4426,13 @@ The final angle will be the base angle plus this amount. Change slope - - + + Select an object to upgrade Select an object to upgrade - + Upgrade Upgrade @@ -4457,7 +4457,7 @@ The final angle will be the base angle plus this amount. Offset of Bezier curves is currently not supported - + Create 2D view Create 2D view @@ -4477,14 +4477,14 @@ The final angle will be the base angle plus this amount. Heal - + Downgrade Downgrade - - + + Task panel: Task panel: @@ -4495,26 +4495,26 @@ The final angle will be the base angle plus this amount. Matriu polar - - + + At least one element must be selected. At least one element must be selected. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -4534,16 +4534,16 @@ The final angle will be the base angle plus this amount. The angle is below -360 degrees. It is set to this value to proceed. - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -4558,8 +4558,8 @@ The final angle will be the base angle plus this amount. Polar angle: - + Center of rotation: Center of rotation: @@ -4678,17 +4678,17 @@ The final angle will be the base angle plus this amount. changed 'Tracking' property type - + ShapeString: oblique angle must be in the -80 to +80 degree range ShapeString: oblique angle must be in the -80 to +80 degree range - + ShapeString: string has no wires ShapeString: string has no wires - + ShapeString: face creation failed for one character ShapeString: face creation failed for one character @@ -4815,38 +4815,35 @@ The final angle will be the base angle plus this amount. Cannot generate shape: - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. Wrong input: must be a number. - - - - + @@ -4856,18 +4853,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a list or tuple of strings, or a single string. Wrong input: must be a list or tuple of strings, or a single string. - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. Wrong input: must be 'Original', 'Frenet', or 'Tangent'. @@ -4884,8 +4884,8 @@ The final angle will be the base angle plus this amount. Input: single value expanded to vector. - + Wrong input: must be an integer number. Wrong input: must be an integer number. @@ -4899,7 +4899,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -4964,12 +4964,12 @@ The final angle will be the base angle plus this amount. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. Wrong input: object has the wrong type. @@ -5296,9 +5296,9 @@ The final angle will be the base angle plus this amount. added view property 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' renamed 'DisplayMode' options to 'World/Screen' @@ -5485,7 +5485,7 @@ from menu Tools -> Addon Manager Error: json module not found. Unable to save style - + Clone Clona @@ -5496,21 +5496,21 @@ from menu Tools -> Addon Manager Slope - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Cert - - + + False Fals @@ -5820,12 +5820,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -6099,12 +6099,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move Mou - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6131,12 +6131,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points Arc by 3 points - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. Creates a circular arc by picking 3 points. @@ -6146,12 +6146,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools Arc tools - + Create various types of circular arcs. Create various types of circular arcs. @@ -6199,32 +6199,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - Add point - - - - Adds a point to an existing Wire or B-spline. - Adds a point to an existing Wire or B-spline. - - - - Draft_DelPoint - - - Remove point - Remove point - - - - Removes a point from an existing Wire or B-spline. - Removes a point from an existing Wire or B-spline. - - Draft_CircularArray @@ -7116,19 +7090,19 @@ set True for fusion or False for compound - + Create a face Create a face + + - - The area of this object The area of this object @@ -7172,8 +7146,8 @@ set True for fusion or False for compound The base object that will be duplicated. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7188,9 +7162,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7319,8 +7293,8 @@ When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - + The base object that will be duplicated The base object that will be duplicated @@ -8123,14 +8097,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size Mida de la fletxa - + Arrow type Tipus de fletxa diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index f82c67e50a..256f46e91a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 45fb520b5d..b9b74b8d64 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -1310,41 +1310,41 @@ plane orientation appears when picking points Show working plane tracker - Show working plane tracker + 显示工作平面追踪器 If checked, the layers drop-down list also includes groups. Objects can then automatically be added to groups as well. - If checked, the layers drop-down list also includes groups. -Objects can then automatically be added to groups as well. + 如果选中，下拉列表也包含分组。 +对象也可以自动添加到组。 Include groups in layer list - Include groups in layer list + 在图层列表中包含组 Command options - Command options + 命令选项 If checked, instructions are displayed in the Report view when using Draft commands - If checked, instructions are displayed in the Report view when using Draft commands + 如果选中此项，使用底图命令时将在报告视图中显示 Show prompts in the Report view - Show prompts in the Report view + 在报表视图中显示提示 If checked, Length input, instead of the X coordinate, will have the initial focus. This allows to indicate a direction and then type a distance. - If checked, Length input, instead of the X coordinate, will have the initial focus. -This allows to indicate a direction and then type a distance. + 如果选中，长度输入而不是X坐标将具有初步的焦点。 +允许指示方向，然后输入距离。 @@ -1539,7 +1539,6 @@ pattern definitions to be added to the standard patterns 字体大小 - @@ -1547,6 +1546,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1647,8 +1647,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1970,9 +1970,9 @@ from the Addon Manager. 允许 FreeCAD 自动下载和更新 DXF 库 - - + + Import options 导入选项 @@ -2189,8 +2189,8 @@ If it is set to '0' the whole spline is treated as a straight segment. 如果设置为“0”，整个样条将被当作直线段。 - + Export options 导出选项 @@ -2467,8 +2467,8 @@ These lines are thicker than normal grid lines. 这个方法 FreeCAD 将用于将 DWG 文件转换为 DXF。 如果选择“自动”，FreeCAD 将尝试按照这里显示的顺序找到以下转换器之一。 如果FreeCAD 找不到任何，您可能需要选择一个特定的转换器并在这里指明其路径。 如果使用 LibreDWG, "ODAFileConverter" 如果使用官方发展援助文件转换器，请选择"dwg2dxf", 如果使用QCAD Pro 版本，请选择"dwg2dwg"。 - + Automatic 自动 @@ -2763,8 +2763,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3173,7 +3173,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate 旋转 @@ -3196,7 +3196,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset 偏移 @@ -3387,59 +3387,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 设置草稿批注工具使用的比例 - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. 没有活动文档。中止。 - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part 无法将新对象插入缩放部分 - + Symbol not implemented. Using a default symbol. 符号未实现。使用默认符号。 - + image is Null 图像为空 - + filename does not exist on the system or in the resource file 文件名在系统或资源文件中不存在 - + unable to load texture 无法加载纹理 - + Does not have 'ViewObject.RootNode'. 没有'ViewObject.RootNode'。 @@ -3547,65 +3547,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 选取目标点 - + Create Label 创建标签 - - + + Pick endpoint of leader line 选取引线的端点 - - + + Pick text position 选择文本位置 - - - + + + Pick first point 选取起点 - + Create Line 创建线 - + Create Wire 创建线 - + Polyline 折线 - - - - - - - + + + + + + + Pick next point 选择下一个点 - + Unable to create a Wire from selected objects 无法从所选对象创建连线 - + Convert to Wire 转换为线 @@ -3630,54 +3630,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 选择位置点 - + Create Text 创建文本 - + Select an object to convert. 选择要转换的对象. - + Convert to Sketch 转换为草图 - + Convert to Draft 转换为草稿 - + Convert Draft/Sketch 轉換為草稿/草圖 - + Select an object to move 选择要移动的对象 - + Pick start point 选择起始点： - - + + Pick end point 选取端点 - + Move 移动 - - + + Some subelements could not be moved. 无法移动某些子元素。 @@ -3688,75 +3688,75 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 选取中心点 - - - + + + - + Pick radius 选取半径 - - - + + + Start angle 起始角度 - - + + Pick start angle 选择起始角度 - - - + + + Aperture angle 孔径角度 - + Pick aperture 选择孔径： - + Create Circle (Part) 建立圓形（零件） - + Create Circle 绘制圆 - + Create Arc (Part) 建立弧線（零件） - + Create Arc 创建弧 - + Pick aperture angle 选择孔径角度 - - + + Arc by 3 points 三点圆弧 - + Create Arc by 3 points Create Arc by 3 points @@ -3766,7 +3766,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 切换网格 - + Select an object to edit 选择要编辑的对象 @@ -3781,17 +3781,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 编辑节点 - + No edit point found for selected object 未找到所选对象的编辑点 - + Too many objects selected, max number set to: 选择的对象太多，最大编号设置为： - + : this object is not editable : 此对象不可编辑 @@ -3821,13 +3821,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 保存样式文件 - + Select an object to project 选择要投影的对象 - - + + Create Point 创建点 @@ -3843,31 +3843,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle 基础角度 - + The base angle you wish to start the rotation from 您希望自哪個底角開始旋轉 - + Pick base angle 选择起始角度 - + Rotation 旋转 - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. 您想要执行的旋转数量。 @@ -3875,7 +3875,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle 选择旋转角度 @@ -3980,12 +3980,12 @@ The final angle will be the base angle plus this amount. 多边形 - + Create Polygon (Part) 建立多邊形 (零件) - + Create Polygon 创建多边形 @@ -3995,7 +3995,7 @@ The final angle will be the base angle plus this amount. 点击线上的任意位置分割它。 - + Split line 分割线 @@ -4005,8 +4005,8 @@ The final angle will be the base angle plus this amount. 选择要修剪/延伸的对象 - + Pick distance 选择距离 @@ -4046,14 +4046,14 @@ The final angle will be the base angle plus this amount. 样条线已闭合 - + Last point has been removed 最后一点已被删除 - + Create B-spline 创建B样条曲线 @@ -4215,14 +4215,14 @@ The final angle will be the base angle plus this amount. 椭圆 - - + + Create Ellipse 绘制椭圆 - - + + Pick opposite point 选择相对点： @@ -4315,25 +4315,25 @@ The final angle will be the base angle plus this amount. 尺寸标注 - - - - + + + + Create Dimension 创建尺寸 - + Create Dimension (radial) 创建尺寸(弧度) - + Edge too short! 边缘太短了！ - + Edges don't intersect! 边缘不相交! @@ -4363,12 +4363,12 @@ The final angle will be the base angle plus this amount. 选取移动的终点 - + Turning one Rectangle into a Wire 将一个矩形变成一条连线 - + Stretch 拉伸 @@ -4378,12 +4378,12 @@ The final angle will be the base angle plus this amount. 矩形 - + Create Plane 建立平面 - + Create Rectangle 绘制矩形 @@ -4398,13 +4398,13 @@ The final angle will be the base angle plus this amount. 选取镜像线的起始点 - + Mirror 镜像 - - + + Pick end point of mirror line 选取镜像线的终点 @@ -4414,17 +4414,17 @@ The final angle will be the base angle plus this amount. 路徑扭曲陣列 - + Select an object to clone 选择一个需要克隆的对象 - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4434,13 +4434,13 @@ The final angle will be the base angle plus this amount. 改变斜度 - - + + Select an object to upgrade 选择要升级的对象 - + Upgrade 升级 @@ -4465,7 +4465,7 @@ The final angle will be the base angle plus this amount. 目前不支持贝塞尔曲线偏移 - + Create 2D view 创建2D视图 @@ -4485,14 +4485,14 @@ The final angle will be the base angle plus this amount. 修复 - + Downgrade 降级 - - + + Task panel: 任务面板: @@ -4503,26 +4503,26 @@ The final angle will be the base angle plus this amount. 环形阵列 - - + + At least one element must be selected. 必须至少选择一个元素。 - - + + Selection is not suitable for array. 选区不适合阵列。 - - - - + + + + Object: 对象: @@ -4542,16 +4542,16 @@ The final angle will be the base angle plus this amount. 角度低于-360度。它被设置为该值以继续。 - - + + Fuse: 合成 - - + + Create Link array: 建立連結陣列： @@ -4566,8 +4566,8 @@ The final angle will be the base angle plus this amount. 极角： - + Center of rotation: 旋转中心: @@ -4686,17 +4686,17 @@ The final angle will be the base angle plus this amount. 更改“追踪”属性类型 - + ShapeString: oblique angle must be in the -80 to +80 degree range 形状字符串：书目角度必须在 -80 到 +80 度范围 - + ShapeString: string has no wires 形状字符串：字符串没有线 - + ShapeString: face creation failed for one character 形状字符串：一个字符创建失败 @@ -4823,38 +4823,35 @@ The final angle will be the base angle plus this amount. 无法生成形状： - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. 输入错误：必须是一个数字。 - - - - + @@ -4864,18 +4861,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. 错误的输入：必须是一个矢量。 - + Wrong input: must be a list or tuple of strings, or a single string. 錯誤的輸入：必須是一個字串列表或元組，或單個字串。 - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. 錯誤輸入：必須是 'Original'、'Frenet' 或 'Tangent'。 @@ -4892,8 +4892,8 @@ The final angle will be the base angle plus this amount. 输入：单个值扩展到矢量。 - + Wrong input: must be an integer number. 错误的输入：必须是整数。 @@ -4907,7 +4907,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. 错误的输入：必须是一个位置、一个矢量或一个旋转。 @@ -4972,12 +4972,12 @@ The final angle will be the base angle plus this amount. 错误的输入：必须是两个元素的列表。例如，[object, 'Edge1']。 - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. 输入错误：对象的类型错误。 @@ -5304,9 +5304,9 @@ The final angle will be the base angle plus this amount. 添加视图属性 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' 重命名为 'World/Screen' 选项 @@ -5491,7 +5491,7 @@ from menu Tools -> Addon Manager 错误：找不到json模块。无法保存样式 - + Clone 克隆 @@ -5502,21 +5502,21 @@ from menu Tools -> Addon Manager 斜率 - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction 偏移方向未定义。请将鼠标移动到对象的两侧以显示方向 - - + + True 是 - - + + False 否 @@ -5824,12 +5824,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline 折线 - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. 创建多点线(折线)。CTRL以捕捉，SHIFT以约束. @@ -6103,12 +6103,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move 移动 - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6135,12 +6135,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points 三点圆弧 - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. 通過選擇3個點來建立圓弧。 @@ -6150,12 +6150,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools 弧工具 - + Create various types of circular arcs. 创建各种类型的圆弧。 @@ -6203,32 +6203,6 @@ Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. - - Draft_AddPoint - - - Add point - 添加点 - - - - Adds a point to an existing Wire or B-spline. - 向现有线或B样条曲线上添加点。 - - - - Draft_DelPoint - - - Remove point - 删除点 - - - - Removes a point from an existing Wire or B-spline. - 从已有曲线或B样条上删除点. - - Draft_CircularArray @@ -7116,19 +7090,19 @@ set True for fusion or False for compound - + Create a face 创建面 + + - - The area of this object 此对象的面积 @@ -7172,8 +7146,8 @@ set True for fusion or False for compound 将被复制的基对象. - + The object along which the copies will be distributed. It must contain 'Edges'. The object along which the copies will be distributed. It must contain 'Edges'. @@ -7188,9 +7162,9 @@ set True for fusion or False for compound Rotation factor of the twisted array. - - + + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -7317,8 +7291,8 @@ they will only be editable by changing the style through the 'Annotation style e 只能通过通过“注释样式编辑器”改变样式才能编辑。 - + The base object that will be duplicated 将被复制的基对象 @@ -8121,14 +8095,14 @@ Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size 箭头大小 - + Arrow type 箭头类型 diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index f2051302e2..dddc5ce318 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 35f78c081c..9bad008256 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -565,7 +565,7 @@ This only works if "Link array" is off. If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - 若被勾選，其結果物件將是一個 “連結陣列 (Link array)”，而不是一個常規陣列。 + 若被勾選，其結果物件將是一個 “連結陣列 (Link array)”，而不是一個常規陣列 (regular array)。 連結陣列在創建多個副本時更有效，但不能融合在一起。 @@ -656,13 +656,13 @@ This only works if "Link array" is off. Fuse - 聯集 + 聯集實體 If checked, the resulting object will be a "Link array" instead of a regular array. A Link array is more efficient when creating multiple copies, but it cannot be fused together. - 若被勾選，其結果物件將是一個 “連結陣列 (Link array)”，而不是一個常規陣列 (regular array)。 + 若被勾選，其結果物件將是一個 “連結陣列 (Link array)”，而不是一個常規陣列。 連結陣列在創建多個副本時更有效，但不能融合在一起。 @@ -949,7 +949,7 @@ value by using the [ and ] keys while drawing px - px + 像素 @@ -1536,7 +1536,6 @@ pattern definitions to be added to the standard patterns 字型尺寸 - @@ -1544,6 +1543,7 @@ pattern definitions to be added to the standard patterns + mm mm @@ -1644,8 +1644,8 @@ in the Annotation scale widget. If the scale is 1:100 the multiplier is 100.The default line width - + px px @@ -1966,9 +1966,9 @@ from the Addon Manager. 允許FreeCAD自動下載並更新DXF函式庫 - - + + Import options 匯入選項 @@ -2183,8 +2183,8 @@ If it is set to '0' the whole spline is treated as a straight segment. 若設為 '0' 則整個 spline 曲線被視為一直線段。 - + Export options 匯出選項 @@ -2460,8 +2460,8 @@ These lines are thicker than normal grid lines. 這是 FreeCAD 將使用的方法將 DWG 文件轉換為 DXF。如果選擇了「自動」，FreeCAD 將嘗試按照以下顯示的順序查找以下轉換器之一。如果 FreeCAD 無法找到任何轉換器，您可能需要選擇特定的轉換器並在這裡指定其路徑。如果使用 LibreDWG，請選擇 "dwg2dxf" 公用程式，如果使用 ODA 檔案轉換器，請選擇 "ODAFileConverter"，如果使用 QCAD 的專業版本，請選擇 "dwg2dwg" 公用程式。 - + Automatic 自動 @@ -2756,8 +2756,8 @@ These lines are thicker than normal grid lines. - - + + @@ -3165,7 +3165,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Rotate 旋轉 @@ -3188,7 +3188,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - + Offset 偏移 @@ -3377,59 +3377,59 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 設定由草稿標註工具使用的縮放比例 - - - - - - - - - + + - + - + + + + + + + + No active document. Aborting. 無活動中文件。中止。 - + Wrong input: object {} not in document. Wrong input: object {} not in document. - + Unable to insert new object into a scaled part 無法將新物件插入到已縮放的零件中 - + Symbol not implemented. Using a default symbol. 符號尚未被實作出來。使用一預設符號。 - + image is Null 影像為空 - + filename does not exist on the system or in the resource file 檔名在系統中或資源檔案中不存在 - + unable to load texture 無法載入紋理 - + Does not have 'ViewObject.RootNode'. 沒有 'ViewObject.RootNode' 屬性。 @@ -3537,65 +3537,65 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 挑選目標點 - + Create Label 建立標籤 - - + + Pick endpoint of leader line 挑選指線終點 - - + + Pick text position 挑選文字位置 - - - + + + Pick first point 挑選第一個點 - + Create Line 建立線 - + Create Wire 建立線 - + Polyline 折線 - - - - - - - + + + + + + + Pick next point 挑選下一個點 - + Unable to create a Wire from selected objects 無法從被選物件建立線段 - + Convert to Wire 轉換成線 @@ -3620,54 +3620,54 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 挑選位置點 - + Create Text 建立文字 - + Select an object to convert. 選擇一個物件進行轉換 - + Convert to Sketch 轉換為草圖 - + Convert to Draft 轉換為草稿 - + Convert Draft/Sketch 轉換為草稿/草圖 - + Select an object to move 選擇一個物件來移動 - + Pick start point 挑選開始點 - - + + Pick end point 挑選終點 - + Move 移動 - - + + Some subelements could not be moved. 某些子元件集無法被移動。 @@ -3678,75 +3678,75 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 挑選中心點 - - - + + + - + Pick radius 選擇半徑 - - - + + + Start angle 起始角度 - - + + Pick start angle 挑選起始角度 - - - + + + Aperture angle 孔徑角 - + Pick aperture 挑選孔徑 - + Create Circle (Part) 建立圓形（零件） - + Create Circle 建立圓形 - + Create Arc (Part) 建立弧線（零件） - + Create Arc 建立弧線 - + Pick aperture angle 挑選孔徑角 - - + + Arc by 3 points 由 3 點所構成的弧線 - + Create Arc by 3 points Create Arc by 3 points @@ -3756,7 +3756,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 切換格線 - + Select an object to edit 選擇一物件來編輯 @@ -3771,17 +3771,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 編輯節點 - + No edit point found for selected object 找不到選定物件的編輯點 - + Too many objects selected, max number set to: 太多物件被選取，最大值設為： - + : this object is not editable ：此物件是不可編輯的 @@ -3811,13 +3811,13 @@ https://github.com/yorikvanhavre/Draft-dxf-importer 儲存樣式檔案 - + Select an object to project 選取一個物件至專案 - - + + Create Point 建立點 @@ -3833,31 +3833,31 @@ https://github.com/yorikvanhavre/Draft-dxf-importer - + Base angle 底角 - + The base angle you wish to start the rotation from 您希望自哪個底角開始旋轉 - + Pick base angle 挑選底角 - + Rotation 旋轉 - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. 您希望進行的旋轉量。 @@ -3865,7 +3865,7 @@ The final angle will be the base angle plus this amount. - + Pick rotation angle 挑選旋轉角度 @@ -3970,12 +3970,12 @@ The final angle will be the base angle plus this amount. 多邊形 - + Create Polygon (Part) 建立多邊形 (零件) - + Create Polygon 建立多邊形 @@ -3985,7 +3985,7 @@ The final angle will be the base angle plus this amount. 點擊一線條的任何位置以分割它。 - + Split line 分割線 @@ -3995,8 +3995,8 @@ The final angle will be the base angle plus this amount. 選取要修剪或延伸的物件 - + Pick distance 挑選距離 @@ -4036,14 +4036,14 @@ The final angle will be the base angle plus this amount. Spline 曲線已封閉 - + Last point has been removed 最後一點已被移除 - + Create B-spline 建立 B-Spline 曲線 @@ -4205,14 +4205,14 @@ The final angle will be the base angle plus this amount. 橢圓 - - + + Create Ellipse 建立橢圓 - - + + Pick opposite point 挑選對點 @@ -4305,25 +4305,25 @@ The final angle will be the base angle plus this amount. 標註 - - - - + + + + Create Dimension 建立標註 - + Create Dimension (radial) 建立尺寸（圓弧） - + Edge too short! 邊緣過短！ - + Edges don't intersect! 邊緣未相交! @@ -4353,12 +4353,12 @@ The final angle will be the base angle plus this amount. 挑選位移的終點 - + Turning one Rectangle into a Wire 將一個矩形轉換成一個線段 - + Stretch 伸展 @@ -4368,12 +4368,12 @@ The final angle will be the base angle plus this amount. 矩形 - + Create Plane 建立平面 - + Create Rectangle 建立矩形 @@ -4388,13 +4388,13 @@ The final angle will be the base angle plus this amount. 選取鏡射對稱線之起始點 - + Mirror 鏡射 - - + + Pick end point of mirror line 拱選鏡射線終點 @@ -4404,17 +4404,17 @@ The final angle will be the base angle plus this amount. 路徑扭曲陣列 - + Select an object to clone 選擇一個物件來克隆 - + Cannot clone object(s) without a Shape, aborting Cannot clone object(s) without a Shape, aborting - + Cannot clone object(s) without a Shape, skipping them Cannot clone object(s) without a Shape, skipping them @@ -4424,13 +4424,13 @@ The final angle will be the base angle plus this amount. 改變斜率 - - + + Select an object to upgrade 選擇一個物件以進行升級 - + Upgrade 升級 @@ -4455,7 +4455,7 @@ The final angle will be the base angle plus this amount. 目前不支持貝茲曲線的偏移 - + Create 2D view 建立 2D 視圖 @@ -4475,14 +4475,14 @@ The final angle will be the base angle plus this amount. 修復 - + Downgrade 降級 - - + + Task panel: 工作面板： @@ -4493,26 +4493,26 @@ The final angle will be the base angle plus this amount. 環形陣列 - - + + At least one element must be selected. 至少必須選擇一個元件。 - - + + Selection is not suitable for array. 選擇不適用在陣列上。 - - - - + + + + Object: 物件: @@ -4532,16 +4532,16 @@ The final angle will be the base angle plus this amount. 角度低於 -360 度。它被設置為這個值以繼續。 - - + + Fuse: 聯集: - - + + Create Link array: 建立連結陣列： @@ -4556,8 +4556,8 @@ The final angle will be the base angle plus this amount. 極角： - + Center of rotation: 旋轉中心點: @@ -4676,17 +4676,17 @@ The final angle will be the base angle plus this amount. 已更改「追蹤 (Tracking)」屬性類型 - + ShapeString: oblique angle must be in the -80 to +80 degree range 字串造型產生器：斜角必須為 -80 到 +80 度範圍內 - + ShapeString: string has no wires 字串造型產生器：字串沒有線段 - + ShapeString: face creation failed for one character 字串造型產生器：一個字元的面創建失敗 @@ -4813,38 +4813,35 @@ The final angle will be the base angle plus this amount. 無法產生形狀： - - - - + + + + Wrong input: base_object not in document. Wrong input: base_object not in document. - - + + Wrong input: path_object not in document. Wrong input: path_object not in document. - - - - - - + + + + + + Wrong input: must be a number. 錯誤輸入: 必須為一數字。 - - - - + @@ -4854,18 +4851,21 @@ The final angle will be the base angle plus this amount. - + + + + Wrong input: must be a vector. 錯誤輸入: 必須為一向量。 - + Wrong input: must be a list or tuple of strings, or a single string. 錯誤的輸入：必須是一個字串列表或元組，或單個字串。 - + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. 錯誤輸入：必須是 'Original'、'Frenet' 或 'Tangent'。 @@ -4882,8 +4882,8 @@ The final angle will be the base angle plus this amount. 輸入：將單一值擴展為向量。 - + Wrong input: must be an integer number. 錯誤輸入: 必須為一整數。 @@ -4897,7 +4897,7 @@ The final angle will be the base angle plus this amount. - + Wrong input: must be a placement, a vector, or a rotation. 錯誤輸入：必須是一個位置、一個向量或一個旋轉。 @@ -4962,12 +4962,12 @@ The final angle will be the base angle plus this amount. 錯誤輸入：必須為一包含兩元件的清單。舉例來說 [object, 'Edge1']。 - + Wrong input: point_object not in document. Wrong input: point_object not in document. - + Wrong input: object has the wrong type. 錯誤輸入：物件有錯誤類型。 @@ -5294,9 +5294,9 @@ The final angle will be the base angle plus this amount. 新增視圖屬性 'TextColor' - - + + renamed 'DisplayMode' options to 'World/Screen' 將 'DisplayMode' 選項更名為 'World/Screen' @@ -5483,7 +5483,7 @@ from menu Tools -> Addon Manager 錯誤：找不到 json 模組。無法儲存樣式 - + Clone 複製 @@ -5494,21 +5494,21 @@ from menu Tools -> Addon Manager 斜率 - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction 偏移方向未定義。請首先將滑鼠移動到物件的一側，以指示方向。 - - + + True 真(True) - - + + False 偽(False) @@ -5778,7 +5778,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Label - Label + 標籤 @@ -5816,12 +5816,12 @@ will be used to provide information to the label. Draft_Wire - + Polyline 折線 - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. 創建多點線（折線）。按住 CTRL 進行鎖點，按住 SHIFT 進行約束。 @@ -6095,12 +6095,12 @@ However, a single sketch with disconnected traces will be converted into several Draft_Move - + Move 移動 - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -6127,12 +6127,12 @@ CTRL to snap, SHIFT to constrain. Draft_Arc_3Points - + Arc by 3 points 由 3 點所構成的弧線 - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. 通過選擇3個點來建立圓弧。 @@ -6142,12 +6142,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools 弧工具 - + Create various types of circular arcs. 建立不同類型的圓弧。 @@ -6194,32 +6194,6 @@ on supported nodes and on supported objects. 按下 E 鍵或 ALT+左鍵單擊以在支援的節點和支援的物件上顯示上下文選單。 - - Draft_AddPoint - - - Add point - 新增點 - - - - Adds a point to an existing Wire or B-spline. - 自現存的線或 B-spline 曲線添加一個點。 - - - - Draft_DelPoint - - - Remove point - 移除點 - - - - Removes a point from an existing Wire or B-spline. - 自現存的線或 B-spline 曲線移除一個點。 - - Draft_CircularArray @@ -6459,7 +6433,7 @@ It works best when choosing a point on a straight segment and not a corner verte Trimex - Trimex + 修剪及延伸 @@ -7100,19 +7074,19 @@ set True for fusion or False for compound - + Create a face 建立一個面 + + - - The area of this object 此物件的面積 @@ -7156,8 +7130,8 @@ set True for fusion or False for compound 此基礎物件將會被複製。 - + The object along which the copies will be distributed. It must contain 'Edges'. 副本將分佈的物件必須包含 'Edges' (邊緣)。 @@ -7172,9 +7146,9 @@ set True for fusion or False for compound 扭曲陣列的旋轉因數。 - - + + Show the individual array elements (only for Link arrays) 顯示單個陣列元件（僅適用於連結陣列） @@ -7290,8 +7264,8 @@ they will only be editable by changing the style through the 'Annotation style e 只能通過「註解樣式編輯器」工具來修改它們。 - + The base object that will be duplicated 此基礎物件將會被複製 @@ -8085,14 +8059,14 @@ Use 'arch' to force US arch notation 使用 'arch' 以強制使用美式建築表示法 - + Arrow size 箭頭尺寸 - + Arrow type 箭頭樣式 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 3d37cc6844..a252a61e5d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -910,108 +910,118 @@ - Spooles + PaStiX - Iterative Scaling + Pardiso + Spooles + + + + + Iterative Scaling + + + + Iterative Cholesky - + Non-linear geometry - + Use non-linear geometry - + Time incrementation control parameter - + Use non ccx defaults - + Time Initial Step - - + + s - + Time End - + Beam, shell element 3D output format - + 3D Output, unchecked for 2D - + Thermo mechanical defaults - + Analysis type (transient or steady state) - + Use steady state - + Maximum number of iterations - + Frequency defaults - + Eigenmode number - + High frequency limit - - + + Hz - + Low frequency limit @@ -2472,7 +2482,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis @@ -2493,15 +2503,15 @@ Specify another file please. FemMaterial - + FEM material + - Material @@ -2526,9 +2536,9 @@ Specify another file please. + - TextLabel @@ -2878,17 +2888,17 @@ Specify another file please. - - - + + + 0 mm @@ -2898,11 +2908,11 @@ Specify another file please. + - - + Parameter @@ -2932,13 +2942,13 @@ Specify another file please. - - + + - + + - Analysis feature properties @@ -2953,9 +2963,12 @@ Specify another file please. - - - + + + + + + @@ -2968,18 +2981,15 @@ Specify another file please. + + + - - - - - - unspecified @@ -3020,16 +3030,16 @@ with a harmonic/oscillating driving force + - Real + - Imaginary @@ -3049,9 +3059,9 @@ with a harmonic/oscillating driving force + - x @@ -3068,9 +3078,9 @@ Note: has no effect if a solid was selected + - y @@ -3087,9 +3097,9 @@ Note: has no effect if a solid was selected + - z @@ -3137,8 +3147,8 @@ Note: has no effect if a solid was selected - + Cross section parameter @@ -3189,30 +3199,30 @@ Note: has no effect if a solid was selected - - - + + + formula - + Velocity x: - + Velocity y: - + Velocity z: @@ -3332,14 +3342,14 @@ Note: for 2D only setting for x is possible, - + Real part of potential z-component - + Imaginary part of potential z-component @@ -3457,26 +3467,26 @@ Note: for 2D only setting for x is possible, - - - - - - - + + + + + + + A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? @@ -3557,7 +3567,7 @@ Note: for 2D only setting for x is possible, - + Are you sure you want to continue? @@ -3612,7 +3622,7 @@ Note: for 2D only setting for x is possible, - + Edit analysis feature @@ -3947,7 +3957,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts index 5e9b885362..8dd42b3b76 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts @@ -24,7 +24,7 @@ Fem - Fem + МКЭ @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Рашальнік раўнанняў Spooles - + Iterative Scaling Паўторнае маштабаванне - + Iterative Cholesky Інтэрактыўнае раскладанне Халецкага - + Non-linear geometry Нелінейная геаметрыя - + Use non-linear geometry Ужываць нелінейную геаметрыю - + Time incrementation control parameter Налада кіравання прырашчэннем часу - + Use non ccx defaults Ужываць першапачатковыя значэнні, якія адрозныя ад CalculiX - + Time Initial Step Пачатковы крок часу - - + + s с - + Time End Канец часу - + Beam, shell element 3D output format Фармат вываду трохмерных элементаў, такі як бэлька і абалонка - + 3D Output, unchecked for 2D Трохмерны вывад, двухмерны адключаны - + Thermo mechanical defaults Першапачатковыя значэнні тэрмамеханікі - + Analysis type (transient or steady state) Тып даследавання (пераходны ці ўстойлівы стан) - + Use steady state Ужываць устойлівы стан - + Maximum number of iterations Найбольшая колькасць паўтораў - + Frequency defaults Першапачатковая частата - + Eigenmode number Нумар абертона - + High frequency limit Мяжа высокай частаты - - + + Hz Гц - + Low frequency limit Мяжа нізкай частаты @@ -1780,7 +1790,7 @@ Specify another file please. Input error - Памылка ўводу + Input error @@ -2506,7 +2516,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Задзейнічаць даследаванне @@ -2527,15 +2537,15 @@ Specify another file please. FemMaterial - + FEM material Матэрыял МКЭ + - Material Матэрыял @@ -2560,9 +2570,9 @@ Specify another file please. Назва матэрыялу + - TextLabel ТэкставыНадпіс @@ -2909,20 +2919,20 @@ Specify another file please. Enable Adjust - Enable Adjust + Уключыць рэгуляванне - - - + + + 0 mm 0 мм @@ -2932,11 +2942,11 @@ Specify another file please. Налада цэнтрыфугавання + - - + Parameter Налада @@ -2966,13 +2976,13 @@ Specify another file please. Налада вынікаў падзелу - - + + - + + - Analysis feature properties Уласцівасці элементаў аналізу @@ -2987,9 +2997,12 @@ Specify another file please. Патэнцыял: - - - + + + + + + @@ -3002,18 +3015,15 @@ Specify another file please. + + + - - - - - - unspecified не ўдакладнены @@ -3054,16 +3064,16 @@ with a harmonic/oscillating driving force Калі межавая ўмова для электрастатычнай сілы + - Real Сапраўдная частка + - Imaginary Уяўная частка @@ -3083,9 +3093,9 @@ with a harmonic/oscillating driving force Уяўная частка скалярнага патэнцыялу + - x x @@ -3104,9 +3114,9 @@ Note: has no effect if a solid was selected Заўвага: не мае аніякага эфекту, калі было абрана суцэльнае цела + - y y @@ -3125,9 +3135,9 @@ Note: has no effect if a solid was selected Заўвага: не мае аніякага эфекту, калі было абрана суцэльнае цела + - z z @@ -3177,8 +3187,8 @@ Note: has no effect if a solid was selected Налада перасеку бэлькі - + Cross section parameter Налада папярочнага перасеку @@ -3229,30 +3239,30 @@ Note: has no effect if a solid was selected Вярчэнне: - - - + + + formula формула - + Velocity x: Хуткасць па восі x: - + Velocity y: Хуткасць па восі y: - + Velocity z: Хуткасць па восі z: @@ -3380,14 +3390,14 @@ Note: for 2D only setting for x is possible, Уяўная частка кампаненты y комплекснага патэнцыялу - + Real part of potential z-component Сапраўдная частка кампаненты z комплекснага патэнцыялу - + Imaginary part of potential z-component Уяўная частка кампаненты z комплекснага патэнцыялу @@ -3505,26 +3515,26 @@ Note: for 2D only setting for x is possible, Скасаваць - - - - - - - + + + + + + + A dialog is already open in the task panel На панэлі задач дыялогавае акно ўжо адчыненае - - - - - - - + + + + + + + Do you want to close this dialog? Ці жадаеце вы зачыніць дыялогавае акно? @@ -3605,7 +3615,7 @@ Note: for 2D only setting for x is possible, Суполкі - + Are you sure you want to continue? Ці ўпэўненыя вы, што жадаеце працягнуць? @@ -3660,7 +3670,7 @@ Note: for 2D only setting for x is possible, Лакальная сістэма каардынат - + Edit analysis feature Змяніць элемент аналізу @@ -3998,7 +4008,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Залежнасці аб'екта @@ -4041,7 +4051,7 @@ For possible variables, see the description box below. Box - Box + Паралелепіпед @@ -4222,22 +4232,22 @@ For possible variables, see the description box below. Clearance Adjustment - Clearance Adjustment + Рэгуляванне зазору Enable Friction - Enable Friction + Уключыць трэнне Friction Coefficient - Friction Coefficient + Каэфіцыент трэння Stick Slope - Stick Slope + Ухіл крывой адгезіі @@ -5249,7 +5259,7 @@ used for the Elmer solver Mesh - Паліганальная сетка + Mesh @@ -6193,7 +6203,7 @@ Please select a result type first. Fem - МКЭ + Fem diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index 9b33122b70..12cc1e823f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Número de mode propi - + High frequency limit Límit d'alta freqüència - - + + Hz Hz - + Low frequency limit Límit de baixa freqüència @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activa l'anàlisi @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Material @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel Etiqueta de text @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Paràmetre @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3070,16 +3080,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginària @@ -3099,9 +3109,9 @@ with a harmonic/oscillating driving force Part imaginaria del potencial escalar + - x x @@ -3120,9 +3130,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3141,9 +3151,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3193,8 +3203,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3245,30 +3255,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3398,14 +3408,14 @@ Note: for 2D only setting for x is possible, Part imaginaria del component y - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3523,26 +3533,26 @@ Note: for 2D only setting for x is possible, Cancel·la - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3623,7 +3633,7 @@ Note: for 2D only setting for x is possible, Grups - + Are you sure you want to continue? Segur que voleu continuar? @@ -3678,7 +3688,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4016,7 +4026,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependències de l'objecte diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index 8f6e12607c..5bbc6e7d35 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Cívky - + Iterative Scaling Iterativní škálování - + Iterative Cholesky Choleského iterativní - + Non-linear geometry Nelineární geometrie - + Use non-linear geometry Použijte nelineární geometrii - + Time incrementation control parameter Parametr řízení přírůstku času - + Use non ccx defaults Použít výchozí hodnoty jiné než ccx - + Time Initial Step Čas Počáteční krok - - + + s s - + Time End Čas Konec - + Beam, shell element 3D output format Výstupní formát 3D nosníku, skořepinového prvku - + 3D Output, unchecked for 2D 3D výstup, nezaškrtnuté pro 2D - + Thermo mechanical defaults Tepelně mechanické výchozí hodnoty - + Analysis type (transient or steady state) Typ analýzy (přechodný nebo ustálený stav) - + Use steady state Použijte ustálený stav - + Maximum number of iterations Maximální počet iterací - + Frequency defaults Výchozí frekvence - + Eigenmode number Počet vlastních tvarů - + High frequency limit Horní limit frekvence - - + + Hz Hz - + Low frequency limit Dolní limit frekvence @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktivovat analýzu @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material Materiál FEM + - Material Materiál @@ -2576,9 +2586,9 @@ Specify another file please. Název materiálu + - TextLabel Textový popisek @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Parametr Centrif + - - + Parameter Parametr @@ -2982,13 +2992,13 @@ Specify another file please. Parametr SectionPrint - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potenciál: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified nespecifikováno @@ -3071,16 +3081,16 @@ s harmonickou/oscilační hnací silou Whether the boundary condition is for the electric force + - Real Skutečnost + - Imaginary Imaginární @@ -3100,9 +3110,9 @@ s harmonickou/oscilační hnací silou Imaginární část skalárního potenciálu + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Poznámka: nemá žádný účinek, pokud bylo vybráno těleso + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Poznámka: nemá žádný účinek, pokud bylo vybráno těleso + - z z @@ -3194,8 +3204,8 @@ Poznámka: nemá žádný účinek, pokud bylo vybráno těleso Parametr průřezu nosníku - + Cross section parameter Parametr průřezu @@ -3246,30 +3256,30 @@ Poznámka: nemá žádný účinek, pokud bylo vybráno těleso Otáčení: - - - + + + formula vzorec - + Velocity x: Rychlost x: - + Velocity y: Rychlost y: - + Velocity z: Rychlost z: @@ -3399,14 +3409,14 @@ Poznámka: pro 2D je možné pouze nastavení pro x, Imaginární část potenciální složky y - + Real part of potential z-component Reálná část potenciální z-složky - + Imaginary part of potential z-component Imaginární část potenciální z-složky @@ -3524,26 +3534,26 @@ Poznámka: pro 2D je možné pouze nastavení pro x, Zrušit - - - - - - - + + + + + + + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - - - - - - - + + + + + + + Do you want to close this dialog? Chcete zavřít tento dialog? @@ -3624,7 +3634,7 @@ Poznámka: pro 2D je možné pouze nastavení pro x, Skupiny - + Are you sure you want to continue? Opravdu si přejete pokračovat? @@ -3679,7 +3689,7 @@ Poznámka: pro 2D je možné pouze nastavení pro x, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ Možné proměnné naleznete v popisném poli níže. Std_Delete - + Object dependencies Závislosti objektu @@ -5275,7 +5285,7 @@ používá se pro řešič Elmer Mesh - Síť + Mesh diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index e9ac39c616..3b7e8e107e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles SPOOLES - + Iterative Scaling Iterative Skalierung - + Iterative Cholesky Iterativer Cholesky - + Non-linear geometry Nichtlineare Geometrie - + Use non-linear geometry Nichtlineare Geometrie verwenden - + Time incrementation control parameter Parameter zur Zeiterhöhung - + Use non ccx defaults Nicht-ccx-Standardwerte verwenden - + Time Initial Step initialer Zeitschritt - - + + s s - + Time End Zeit Ende - + Beam, shell element 3D output format Träger, Hüll-Element-Ausgabeformat - + 3D Output, unchecked for 2D 3D-Ausgabe, deaktiviert für 2D - + Thermo mechanical defaults Thermo-mechanische Standardwerte - + Analysis type (transient or steady state) Art der Analyse (transient oder stationärer Zustand) - + Use steady state Stationären Zustand verwenden - + Maximum number of iterations Maximale Anzahl an Iterationen - + Frequency defaults Frequenz-Vorgabewerte - + Eigenmode number Anzahl Eigenformen - + High frequency limit Höchste Frequenz - - + + Hz Hz - + Low frequency limit Niedrigste Frequenz @@ -1384,7 +1394,7 @@ ein Analysebehälter angelegt wird File does not exist - Datei existiert nicht + Datei nicht gefunden @@ -1604,7 +1614,7 @@ iterativen Löser eingesetzt wird und die Fehlermeldung File does not exist - Datei nicht gefunden + Datei existiert nicht @@ -2512,7 +2522,7 @@ Geben Sie bitte eine andere Datei an. FemGui::ViewProviderFemAnalysis - + Activate analysis Analyse aktivieren @@ -2533,15 +2543,15 @@ Geben Sie bitte eine andere Datei an. FemMaterial - + FEM material FEM-Material + - Material Material @@ -2566,9 +2576,9 @@ Geben Sie bitte eine andere Datei an. Materialname + - TextLabel TextLabel @@ -2915,20 +2925,20 @@ Geben Sie bitte eine andere Datei an. Enable Adjust - Enable Adjust + Anpassen aktivieren - - - + + + 0 mm 0 mm @@ -2938,11 +2948,11 @@ Geben Sie bitte eine andere Datei an. Parameter der zentrifugalen Last + - - + Parameter Parameter @@ -2972,13 +2982,13 @@ Geben Sie bitte eine andere Datei an. Parameter Querschnitts-Auszug - - + + - + + - Analysis feature properties Eigenschaften des Analyseelements @@ -2993,9 +3003,12 @@ Geben Sie bitte eine andere Datei an. Potential: - - - + + + + + + @@ -3008,18 +3021,15 @@ Geben Sie bitte eine andere Datei an. + + + - - - - - - unspecified unbestimmt @@ -3061,16 +3071,16 @@ mit harmonischer/oszillierender Antriebskraft verwendet Gibt an, ob die Randbedingung für die elektrostatische Kraft gilt + - Real Reell + - Imaginary Imaginär @@ -3090,9 +3100,9 @@ mit harmonischer/oszillierender Antriebskraft verwendet Imaginärer Teil des Skalarpotentials + - x x @@ -3111,9 +3121,9 @@ Note: has no effect if a solid was selected Hinweis: hat keinen Effekt, wenn ein Volumen ausgewählt wurde + - y y @@ -3132,9 +3142,9 @@ Note: has no effect if a solid was selected Hinweis: hat keinen Effekt, wenn ein Volumen ausgewählt wurde + - z z @@ -3184,8 +3194,8 @@ Hinweis: hat keinen Effekt, wenn ein Volumen ausgewählt wurde Stabquerschnitt-Parameter - + Cross section parameter Querschnittsparameter @@ -3236,30 +3246,30 @@ Hinweis: hat keinen Effekt, wenn ein Volumen ausgewählt wurde Drehung: - - - + + + formula Formel - + Velocity x: Geschwindigkeit x: - + Velocity y: Geschwindigkeit y: - + Velocity z: Geschwindigkeit z: @@ -3301,7 +3311,7 @@ Hinweis: hat keinen Effekt, wenn ein Volumen ausgewählt wurde Label - Beschriftung + Bezeichnung @@ -3389,14 +3399,14 @@ Hinweis: Für 2D ist nur für x möglich, Imaginärer Teil der potenziellen y-Komponente - + Real part of potential z-component Realer Teil der potentiellen z-Komponente - + Imaginary part of potential z-component Imaginärer Teil der potentiellen z-Komponente @@ -3514,26 +3524,26 @@ Hinweis: Für 2D ist nur für x möglich, Abbrechen - - - - - - - + + + + + + + A dialog is already open in the task panel Im Aufgabenbereich ist bereits ein Dialog geöffnet - - - - - - - + + + + + + + Do you want to close this dialog? Soll dieser Dialog geschlossen werden? @@ -3614,7 +3624,7 @@ Hinweis: Für 2D ist nur für x möglich, Gruppen - + Are you sure you want to continue? Sind Sie sicher, dass Sie fortfahren möchten? @@ -3669,7 +3679,7 @@ Hinweis: Für 2D ist nur für x möglich, Lokales Koordinatensystem - + Edit analysis feature Analyseelement bearbeiten @@ -4007,7 +4017,7 @@ Siehe das nachfolgende Beschreibungsfeld für mögliche Variablen. Std_Delete - + Object dependencies Objektabhängigkeiten @@ -4231,22 +4241,22 @@ Siehe das nachfolgende Beschreibungsfeld für mögliche Variablen. Clearance Adjustment - Clearance Adjustment + Abstandsanpassung Enable Friction - Enable Friction + Reibung aktivieren Friction Coefficient - Friction Coefficient + Reibbeiwert Stick Slope - Stick Slope + Neigungswinkel diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 73a59f3b21..6c681f9756 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Αριθμός Eigenmode - + High frequency limit Όριο υψηλής συχνότητας - - + + Hz Hz - + Low frequency limit Όριο χαμηλής συχνότητας @@ -2518,7 +2528,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Ενεργοποίηση ανάλυσης @@ -2539,15 +2549,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Υλικό @@ -2572,9 +2582,9 @@ Specify another file please. Material name + - TextLabel Ετικέτα κειμένου @@ -2924,17 +2934,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2944,11 +2954,11 @@ Specify another file please. Centrif parameter + - - + Parameter Παράμετρος @@ -2978,13 +2988,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -2999,9 +3009,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3014,18 +3027,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3067,16 +3077,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3096,9 +3106,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3117,9 +3127,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3138,9 +3148,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3190,8 +3200,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3242,30 +3252,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3395,14 +3405,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3520,26 +3530,26 @@ Note: for 2D only setting for x is possible, Ακύρωση - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3620,7 +3630,7 @@ Note: for 2D only setting for x is possible, Ομάδες - + Are you sure you want to continue? Are you sure you want to continue? @@ -3675,7 +3685,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4013,7 +4023,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Εξαρτήσεις αντικειμένου diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index f66850d3eb..1ac40fb4ee 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Escalado iterativo - + Iterative Cholesky Cholesky iterativo - + Non-linear geometry Geometría no lineal - + Use non-linear geometry Usar geometría no lineal - + Time incrementation control parameter Parámetro de control de incremento de tiempo - + Use non ccx defaults Usar ajustes ccx no predeterminados - + Time Initial Step Tiempo inicial de paso - - + + s s - + Time End Fin del tiempo - + Beam, shell element 3D output format Viga, formato de salida 3D del elemento shell - + 3D Output, unchecked for 2D Salida 3D, no revisado para 2D - + Thermo mechanical defaults Ajustes termomecánicos predeterminados - + Analysis type (transient or steady state) Tipo de análisis (transitorio o estado estable) - + Use steady state Usar estado estable - + Maximum number of iterations Número máximo de iteraciones - + Frequency defaults Ajustes de frecuencia predeterminados - + Eigenmode number Número de modo propio - + High frequency limit Límite de alta frecuencia - - + + Hz Hz - + Low frequency limit Límite de baja frecuencia @@ -2155,7 +2165,7 @@ Especifique otro archivo, por favor. Only one type of selection (vertex, face or edge) per analysis feature allowed! - Only one type of selection (vertex, face or edge) per analysis feature allowed! + ¡Solo un tipo de selección (vértice, cara o arista) por análisis de característica permitida! @@ -2166,7 +2176,7 @@ Especifique otro archivo, por favor. Select an edge or a face, please. - Seleccione una arista o una cara, por favor. + Seleccione un borde o una cara, por favor. @@ -2521,7 +2531,7 @@ Especifique otro archivo, por favor. FemGui::ViewProviderFemAnalysis - + Activate analysis Activar análisis @@ -2542,15 +2552,15 @@ Especifique otro archivo, por favor. FemMaterial - + FEM material Material MEF + - Material Material @@ -2575,9 +2585,9 @@ Especifique otro archivo, por favor. Nombre del Material + - TextLabel EtiquetaTexto @@ -2927,17 +2937,17 @@ Especifique otro archivo, por favor. Enable Adjust - - - + + + 0 mm 0 mm @@ -2947,11 +2957,11 @@ Especifique otro archivo, por favor. Parámetro de Centrífuga + - - + Parameter Parámetro @@ -2981,13 +2991,13 @@ Especifique otro archivo, por favor. Parámetro de Sección de Impresión - - + + - + + - Analysis feature properties Analysis feature properties @@ -3002,9 +3012,12 @@ Especifique otro archivo, por favor. Potential: - - - + + + + + + @@ -3017,18 +3030,15 @@ Especifique otro archivo, por favor. + + + - - - - - - unspecified no especificado @@ -3070,16 +3080,16 @@ con una fuerza de conducción armónica/oscilante Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginario @@ -3099,9 +3109,9 @@ con una fuerza de conducción armónica/oscilante Parte imaginaria del potencial escalar + - x x @@ -3120,9 +3130,9 @@ Note: has no effect if a solid was selected Nota: no tiene efecto si un sólido fue seleccionado + - y y @@ -3141,9 +3151,9 @@ Note: has no effect if a solid was selected Nota: no tiene efecto si un sólido fue seleccionado + - z z @@ -3193,8 +3203,8 @@ Nota: no tiene efecto si un sólido fue seleccionado Parámetro de sección de viga - + Cross section parameter Parámetro de sección cruzada @@ -3245,30 +3255,30 @@ Nota: no tiene efecto si un sólido fue seleccionado Rotación: - - - + + + formula fórmula - + Velocity x: Velocidad x: - + Velocity y: Velocidad y: - + Velocity z: Velocidad z: @@ -3398,14 +3408,14 @@ Nota: para 2D solo la configuración para x es posible, Parte imaginaria del potencial componente y - + Real part of potential z-component Parte real del potencial componente z - + Imaginary part of potential z-component Parte imaginaria del potencial componente z @@ -3523,26 +3533,26 @@ Nota: para 2D solo la configuración para x es posible, Cancelar - - - - - - - + + + + + + + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - - - - - + + + + + + + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3623,7 +3633,7 @@ Nota: para 2D solo la configuración para x es posible, Grupos - + Are you sure you want to continue? ¿Estás seguro/a de que quieres continuar? @@ -3678,7 +3688,7 @@ Nota: para 2D solo la configuración para x es posible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4016,7 +4026,7 @@ Para posibles variables, vea el cuadro de descripción a continuación. Std_Delete - + Object dependencies Dependencias del objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 992e120836..527abfc247 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Escalado iterativo - + Iterative Cholesky Cholesky iterativo - + Non-linear geometry Geometría no lineal - + Use non-linear geometry Usar geometría no lineal - + Time incrementation control parameter Parámetro de control de incremento de tiempo - + Use non ccx defaults Usar ajustes ccx no predeterminados - + Time Initial Step Tiempo inicial de paso - - + + s s - + Time End Fin del tiempo - + Beam, shell element 3D output format Viga, formato de salida 3D del elemento shell - + 3D Output, unchecked for 2D Salida 3D, no revisado para 2D - + Thermo mechanical defaults Ajustes termomecánicos predeterminados - + Analysis type (transient or steady state) Tipo de análisis (transitorio o estado estable) - + Use steady state Usar estado estable - + Maximum number of iterations Número máximo de iteraciones - + Frequency defaults Ajustes de frecuencia predeterminados - + Eigenmode number Número de modo propio - + High frequency limit Límite de alta frecuencia - - + + Hz  Hz - + Low frequency limit Límite de baja frecuencia @@ -2521,7 +2531,7 @@ Especifique otro archivo, por favor. FemGui::ViewProviderFemAnalysis - + Activate analysis Activar análisis @@ -2542,15 +2552,15 @@ Especifique otro archivo, por favor. FemMaterial - + FEM material Material MEF + - Material Material @@ -2575,9 +2585,9 @@ Especifique otro archivo, por favor. Nombre del Material + - TextLabel Etiqueta Texto @@ -2927,17 +2937,17 @@ Especifique otro archivo, por favor. Enable Adjust - - - + + + 0 mm 0 mm @@ -2947,11 +2957,11 @@ Especifique otro archivo, por favor. Parámetro de Centrífuga + - - + Parameter Parámetro @@ -2981,13 +2991,13 @@ Especifique otro archivo, por favor. Parámetro de Sección de Impresión - - + + - + + - Analysis feature properties Analysis feature properties @@ -3002,9 +3012,12 @@ Especifique otro archivo, por favor. Potential: - - - + + + + + + @@ -3017,18 +3030,15 @@ Especifique otro archivo, por favor. + + + - - - - - - unspecified no especificado @@ -3070,16 +3080,16 @@ con una fuerza de conducción armónica/oscilante Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginario @@ -3099,9 +3109,9 @@ con una fuerza de conducción armónica/oscilante Parte imaginaria del potencial escalar + - x x @@ -3120,9 +3130,9 @@ Note: has no effect if a solid was selected Nota: no tiene efecto si un sólido fue seleccionado + - y y @@ -3141,9 +3151,9 @@ Note: has no effect if a solid was selected Nota: no tiene efecto si un sólido fue seleccionado + - z z @@ -3193,8 +3203,8 @@ Nota: no tiene efecto si un sólido fue seleccionado Parámetro de sección de viga - + Cross section parameter Parámetro de sección cruzada @@ -3245,30 +3255,30 @@ Nota: no tiene efecto si un sólido fue seleccionado Rotación: - - - + + + formula fórmula - + Velocity x: Velocidad x: - + Velocity y: Velocidad y: - + Velocity z: Velocidad z: @@ -3398,14 +3408,14 @@ Nota: para 2D solo la configuración para x es posible, Parte imaginaria del potencial componente y - + Real part of potential z-component Parte real del potencial componente z - + Imaginary part of potential z-component Parte imaginaria del potencial componente z @@ -3523,26 +3533,26 @@ Nota: para 2D solo la configuración para x es posible, Cancelar - - - - - - - + + + + + + + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - - - - - + + + + + + + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3623,7 +3633,7 @@ Nota: para 2D solo la configuración para x es posible, Grupos - + Are you sure you want to continue? ¿Está seguro de que desea continuar? @@ -3678,7 +3688,7 @@ Nota: para 2D solo la configuración para x es posible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4016,7 +4026,7 @@ Para posibles variables, vea el cuadro de descripción a continuación. Std_Delete - + Object dependencies Dependencias del objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 93153ce1ee..2bf231c125 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -911,108 +911,118 @@ hasierako tenperatura: + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spoolak - + Iterative Scaling Eskalatze iteratiboa - + Iterative Cholesky Cholesky iteratiboa - + Non-linear geometry Geometria ez lineala - + Use non-linear geometry Erabili geometria ez lineala - + Time incrementation control parameter Denbora handitzeko kontrol-parametroa - + Use non ccx defaults Erabili ccx ez diren lehenespenak - + Time Initial Step Denboraren hasierako urratsa - - + + s s - + Time End Denboraren amaiera - + Beam, shell element 3D output format Habea, oskol-elementuaren 3D irteeraren formatua - + 3D Output, unchecked for 2D 3D irteera, ez markatu 2Drako - + Thermo mechanical defaults Lehenespen termomekanikoak - + Analysis type (transient or steady state) Analisi mota (egoera egonkorra edo aldi baterakoa) - + Use steady state Erabili egoera egonkorra - + Maximum number of iterations Iterazio kopuru maximoa - + Frequency defaults Maiztasun-lehenespenak - + Eigenmode number Eigenmode zenbakia - + High frequency limit Maiztasun altuko muga - - + + Hz Hz - + Low frequency limit Behe maiztasuneko muga @@ -2523,7 +2533,7 @@ Zehaztu beste fitxategi bat. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktibatu analisia @@ -2544,15 +2554,15 @@ Zehaztu beste fitxategi bat. FemMaterial - + FEM material FEM materiala + - Material Materiala @@ -2577,9 +2587,9 @@ Zehaztu beste fitxategi bat. Materialaren izena + - TextLabel Testu-etiketa @@ -2929,17 +2939,17 @@ Zehaztu beste fitxategi bat. Enable Adjust - - - + + + 0 mm 0 mm @@ -2949,11 +2959,11 @@ Zehaztu beste fitxategi bat. Zentrifugazio-parametroa + - - + Parameter Parametroa @@ -2983,13 +2993,13 @@ Zehaztu beste fitxategi bat. Sekzio-inprimatzearen parametroa - - + + - + + - Analysis feature properties Analisi-elementuaren propietateak @@ -3004,9 +3014,12 @@ Zehaztu beste fitxategi bat. Potentziala: - - - + + + + + + @@ -3019,18 +3032,15 @@ Zehaztu beste fitxategi bat. + + + - - - - - - unspecified zehaztu gabea @@ -3072,16 +3082,16 @@ duten ekuazioetan soilik erabiltzen da Muga-baldintza indar elektrikorako den ala ez + - Real Erreala + - Imaginary Irudikaria @@ -3101,9 +3111,9 @@ duten ekuazioetan soilik erabiltzen da Potentzial eskalar baten zati irudikaria + - x x @@ -3122,9 +3132,9 @@ Note: has no effect if a solid was selected Oharra: ez du eraginik solido bat hautatu bada + - y y @@ -3143,9 +3153,9 @@ Note: has no effect if a solid was selected Oharra: ez du eraginik solido bat hautatu bada + - z z @@ -3195,8 +3205,8 @@ Oharra: ez du eraginik solido bat hautatu bada Habe-sekzioaren parametroa - + Cross section parameter Zeharkako sekzioaren parametroa @@ -3247,30 +3257,30 @@ Oharra: ez du eraginik solido bat hautatu bada Biraketa: - - - + + + formula formula - + Velocity x: X abiadura: - + Velocity y: Y abiadura: - + Velocity z: Z abiadura: @@ -3400,14 +3410,14 @@ Oharra: 2D kasuetan soilik, X-en ezarpena posible da, Potentzialaren Y osagaiaren zati irudikaria - + Real part of potential z-component Potentzialaren Z osagaiaren zati erreala - + Imaginary part of potential z-component Potentzialaren Z osagaiaren zati irudikaria @@ -3525,26 +3535,26 @@ Oharra: 2D kasuetan soilik, X-en ezarpena posible da, Utzi - - - - - - - + + + + + + + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - - - - - - - + + + + + + + Do you want to close this dialog? Koadro hori itxi nahi duzu? @@ -3625,7 +3635,7 @@ Oharra: 2D kasuetan soilik, X-en ezarpena posible da, Taldeak - + Are you sure you want to continue? Ziur zaude jarraitu nahi duzula? @@ -3680,7 +3690,7 @@ Oharra: 2D kasuetan soilik, X-en ezarpena posible da, Koordenatuen sistema lokala - + Edit analysis feature Editatu analisi-elementua @@ -4018,7 +4028,7 @@ Balizko aldagaietarako, ikusi beheko deskribapen-koadroa. Std_Delete - + Object dependencies Objektuaren mendekotasunak diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 53448ee93d..79294c669c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Ominaisarvojen lukumäärä - + High frequency limit Taajuuden yläraja - - + + Hz Hz - + Low frequency limit Taajuuden alaraja @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktivoi analyysi @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Materiaali @@ -2576,9 +2586,9 @@ Specify another file please. Materiaalin nimi + - TextLabel TekstiSelite @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parametri @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Peruuta - - - - - - - + + + + + + + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - - - - - - - + + + + + + + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Ryhmät - + Are you sure you want to continue? Haluatko varmasti jatkaa? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Objektin riippuvuudet diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index cc6e98c253..dd039121cd 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Solveur d'équations de Spooles - + Iterative Scaling Mise à l'échelle itérative - + Iterative Cholesky Solveur itératif de Cholesky - + Non-linear geometry Géométrie non-linéaire - + Use non-linear geometry Utiliser la géométrie non-linéaire - + Time incrementation control parameter Paramètre de contrôle de l'incrémentation du temps - + Use non ccx defaults Utiliser les valeurs par défaut autres que celles de CalculiX - + Time Initial Step Intervalle de temps initial - - + + s s - + Time End Fin du temps de calcul - + Beam, shell element 3D output format Format de sortie d'éléments 1D, 2D, 3D - + 3D Output, unchecked for 2D Sortie 3D, décoché pour 2D - + Thermo mechanical defaults Valeurs thermodynamiques par défaut - + Analysis type (transient or steady state) Type d'analyse (état transitoire ou stable) - + Use steady state Utiliser un état stable - + Maximum number of iterations Nombre maximum d'itérations - + Frequency defaults Fréquences par défaut - + Eigenmode number Nombre de modes propres - + High frequency limit Limite de la fréquence haute - - + + Hz Hz - + Low frequency limit Limite de la fréquence basse @@ -2511,7 +2521,7 @@ Spécifier un autre fichier. FemGui::ViewProviderFemAnalysis - + Activate analysis Activer l'analyse @@ -2532,15 +2542,15 @@ Spécifier un autre fichier. FemMaterial - + FEM material Matériau FEM + - Material Matériau @@ -2565,9 +2575,9 @@ Spécifier un autre fichier. Nom du matériau + - TextLabel Étiquette du texte @@ -2914,20 +2924,20 @@ Spécifier un autre fichier. Enable Adjust - Enable Adjust + Activer l'ajustement - - - + + + 0 mm 0 mm @@ -2937,11 +2947,11 @@ Spécifier un autre fichier. Paramètre de centrifugation + - - + Parameter Paramètre @@ -2971,13 +2981,13 @@ Spécifier un autre fichier. Paramètre d'affichage de la section - - + + - + + - Analysis feature properties Propriétés de la fonction d'analyse @@ -2992,9 +3002,12 @@ Spécifier un autre fichier. Potentiel : - - - + + + + + + @@ -3007,18 +3020,15 @@ Spécifier un autre fichier. + + + - - - - - - unspecified non spécifié @@ -3060,16 +3070,16 @@ avec une force motrice harmonique ou oscillante Si la condition aux limites est pour la force électrique + - Real Réel + - Imaginary Imaginaire @@ -3089,9 +3099,9 @@ avec une force motrice harmonique ou oscillante Partie imaginaire du potentiel scalaire + - x X @@ -3110,9 +3120,9 @@ Note: has no effect if a solid was selected Remarque : n'a pas d'effet si un solide a été sélectionné + - y Y @@ -3131,9 +3141,9 @@ Note: has no effect if a solid was selected Remarque : n'a pas d'effet si un solide a été sélectionné + - z Z @@ -3183,8 +3193,8 @@ Remarque : n'a pas d'effet si un solide a été sélectionné Paramètre de la section de l'élément 1D - + Cross section parameter Paramètre de section de passage @@ -3235,30 +3245,30 @@ Remarque : n'a pas d'effet si un solide a été sélectionné Rotation : - - - + + + formula formule - + Velocity x: Vitesse x : - + Velocity y: Vitesse y: - + Velocity z: Vitesse z: @@ -3385,14 +3395,14 @@ Remarque : pour la 2D, seul le réglage en X est possible, le réglage en Y sera Partie imaginaire de la composante en Y du potentiel - + Real part of potential z-component Partie réelle de la composante en Z du potentiel - + Imaginary part of potential z-component Partie imaginaire de la composante en Z du potentiel @@ -3510,26 +3520,26 @@ Remarque : pour la 2D, seul le réglage en X est possible, le réglage en Y sera Annuler - - - - - - - + + + + + + + A dialog is already open in the task panel Une fenêtre de dialogue est déjà ouverte dans le panneau des tâches - - - - - - - + + + + + + + Do you want to close this dialog? Voulez-vous fermer cette fenêtre de dialogue? @@ -3610,7 +3620,7 @@ Remarque : pour la 2D, seul le réglage en X est possible, le réglage en Y sera Groupes - + Are you sure you want to continue? Êtes-vous sûr de vouloir continuer ? @@ -3665,7 +3675,7 @@ Remarque : pour la 2D, seul le réglage en X est possible, le réglage en Y sera Système de coordonnées locales - + Edit analysis feature Éditer la fonction d'analyse @@ -3685,7 +3695,7 @@ Remarque : pour la 2D, seul le réglage en X est possible, le réglage en Y sera None - Rien + Aucun @@ -4003,7 +4013,7 @@ Pour les variables possibles, voir la zone de description ci-dessous. Std_Delete - + Object dependencies Dépendances des objets @@ -4227,22 +4237,22 @@ Pour les variables possibles, voir la zone de description ci-dessous. Clearance Adjustment - Clearance Adjustment + Ajuster le dégagement Enable Friction - Enable Friction + Activer la friction Friction Coefficient - Friction Coefficient + Coefficient de friction Stick Slope - Stick Slope + Pente de la courbe de collage diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 8e336dc072..ab6bd84830 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Xeometría non lineal - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Número de modo propio - + High frequency limit Limite de alta frecuencia - - + + Hz Hz - + Low frequency limit Limite de baixa frecuencia @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activar análise @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material Material FEM + - Material Material @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel TextLabel @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parámetro @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotación: - - - + + + formula formula - + Velocity x: Velocidade x: - + Velocity y: Velocidade y: - + Velocity z: Velocidade z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Cancelar - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Grupos - + Are you sure you want to continue? Are you sure you want to continue? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependencias do obxecto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index e3c9787e70..cac023cbeb 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -912,108 +912,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Špule - + Iterative Scaling Iteracijsko skaliranje - + Iterative Cholesky Iteracijsko Cholesky - + Non-linear geometry Nelinearna geometrija - + Use non-linear geometry Koristi nelinearnu geometriju - + Time incrementation control parameter Parametar kontrole vremenskog inkrementa - + Use non ccx defaults Koristi nestandardne ccx vrijednosti - + Time Initial Step Vrijeme inicijalnog podešavanja - - + + s s - + Time End Završno vrijeme - + Beam, shell element 3D output format 3D format izvoza elementa Grede, Šuplje konstrukcije - + 3D Output, unchecked for 2D Izlaz u 3D, za 2D nije označeno - + Thermo mechanical defaults Zadane vrijednosti termomehanike - + Analysis type (transient or steady state) Vrsta analize (prolazno ili stabilno stanje) - + Use steady state Koristi stabilno stanje - + Maximum number of iterations Maksimalni broj ponavljanja - + Frequency defaults Zadane vrijednosti frekvencije - + Eigenmode number Broj vlastitih oblika - + High frequency limit Ograničenje gornje frekvencije - - + + Hz Hz - + Low frequency limit Ograničenje donje frekvencije @@ -2526,7 +2536,7 @@ Navedi drugu datoteku molim. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktiviraj analizu @@ -2547,15 +2557,15 @@ Navedi drugu datoteku molim. FemMaterial - + FEM material FEM material + - Material Materijal @@ -2580,9 +2590,9 @@ Navedi drugu datoteku molim. Ime materijala + - TextLabel Tekst oznaka @@ -2933,17 +2943,17 @@ Navedi drugu datoteku molim. Enable Adjust - - - + + + 0 mm 0 mm @@ -2953,11 +2963,11 @@ Navedi drugu datoteku molim. Centrifugalni parametar + - - + Parameter Parametar @@ -2987,13 +2997,13 @@ Navedi drugu datoteku molim. Parametri ispisa presjeka - - + + - + + - Analysis feature properties Svojstva obilježja analize @@ -3008,9 +3018,12 @@ Navedi drugu datoteku molim. Potencijal: - - - + + + + + + @@ -3023,18 +3036,15 @@ Navedi drugu datoteku molim. + + + - - - - - - unspecified neodređen @@ -3076,16 +3086,16 @@ s harmoničnim/oscilirajućim pogonskim silom. Pokazuje da li se primjenjuje ograničenje za elektrostatičku silu + - Real Realno + - Imaginary Imaginarno @@ -3105,9 +3115,9 @@ s harmoničnim/oscilirajućim pogonskim silom. Imaginarni dio skalarnog potencijala + - x x @@ -3126,9 +3136,9 @@ Note: has no effect if a solid was selected Napomena: nema utjecaja ako je odabrano volumensko tijelo + - y y @@ -3147,9 +3157,9 @@ Note: has no effect if a solid was selected Napomena: nema utjecaja ako je odabrano volumensko tijelo + - z z @@ -3199,8 +3209,8 @@ Napomena: nema utjecaja ako je odabrano volumensko tijelo Parametri presjeka grede - + Cross section parameter Parametar poprečnog presjeka @@ -3253,30 +3263,30 @@ Napomena: nema utjecaja ako je odabrano volumensko tijelo Rotacija: - - - + + + formula formula - + Velocity x: Protok x: - + Velocity y: Protok y: - + Velocity z: Protok z: @@ -3406,14 +3416,14 @@ Napomena: u 2D je moguće samo podešavanje za x Imaginarni dio potencijala y-komponente - + Real part of potential z-component Realni dio potencijala z-komponente - + Imaginary part of potential z-component Imaginarni dio potencijala z-komponente @@ -3531,26 +3541,26 @@ Napomena: u 2D je moguće samo podešavanje za x Otkazati - - - - - - - + + + + + + + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - - - - - - - + + + + + + + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? @@ -3631,7 +3641,7 @@ Napomena: u 2D je moguće samo podešavanje za x Grupe - + Are you sure you want to continue? Jeste li sigurni da želite nastaviti? @@ -3686,7 +3696,7 @@ Napomena: u 2D je moguće samo podešavanje za x Lokalni koordinatni sustav - + Edit analysis feature Svojstva analize uređivanja @@ -4024,7 +4034,7 @@ Za moguće varijable, pogledaj okvir za opis ispod. Std_Delete - + Object dependencies Zavisnosti objekta diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 48f21e2a7b..8ffebd99fb 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -24,7 +24,7 @@ Fem - Végeselemes analízis FEM + Végeselemes analízis Vem @@ -60,7 +60,7 @@ Fem - Végeselemes analízis Vem + Vem @@ -78,7 +78,7 @@ Fem - Vem + Végeselemes analízis Vem @@ -114,7 +114,7 @@ Fem - Végeselemes analízis Vem + Vem @@ -341,7 +341,7 @@ Fem - Vem + Végeselemes analízis Vem @@ -369,7 +369,7 @@ Fem - Végeselemes analízis Vem + Vem @@ -423,7 +423,7 @@ Fem - Vem + Végeselemes analízis Vem @@ -497,7 +497,7 @@ Fem - Végeselemes analízis Vem + Vem @@ -573,7 +573,7 @@ Fem - Vem + Végeselemes analízis FEM @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Orsóegyenletek Sooples megoldója - + Iterative Scaling Iteratív megoldó méretezése - + Iterative Cholesky Cholesky iteratív megoldó - + Non-linear geometry Nemlineáris geometria - + Use non-linear geometry Tartalmazza a geometriai nemlinearitást - + Time incrementation control parameter Időnövekmény-szabályozási paraméter - + Use non ccx defaults A Calculixtól eltérő alapértelmezett beállítások használata - + Time Initial Step Az idő kezdeti lépése - - + + s s - + Time End Az idő vége - + Beam, shell element 3D output format 3D eredményformátum gerendákhoz és burkolólapokhoz - + 3D Output, unchecked for 2D 3D kimenet, letiltva 2D-ben - + Thermo mechanical defaults Termomechanikus alapértelmezett értékek - + Analysis type (transient or steady state) Az elemzés típusa (átmeneti vagy állandó állapot) - + Use steady state Állandósult állapot használata - + Maximum number of iterations Iterációk maximális száma - + Frequency defaults Gyakoriság alapértelmezett értékei - + Eigenmode number Egyediforma száma - + High frequency limit Magas frekvenciájú limit - - + + Hz Hz - + Low frequency limit Alacsony frekvenciájú limit @@ -2512,7 +2522,7 @@ Kérjük, adjon meg egy másik fájlt. FemGui::ViewProviderFemAnalysis - + Activate analysis Elemzés bekapcsolása @@ -2533,15 +2543,15 @@ Kérjük, adjon meg egy másik fájlt. FemMaterial - + FEM material VEM anyag + - Material Anyag @@ -2566,9 +2576,9 @@ Kérjük, adjon meg egy másik fájlt. Anyag neve + - TextLabel Szövegfelirat @@ -2915,20 +2925,20 @@ Kérjük, adjon meg egy másik fájlt. Enable Adjust - Enable Adjust + Igazítás engedélyezése - - - + + + 0 mm 0 mm @@ -2938,11 +2948,11 @@ Kérjük, adjon meg egy másik fájlt. Centrifugális paraméter + - - + Parameter Paraméter @@ -2972,13 +2982,13 @@ Kérjük, adjon meg egy másik fájlt. Keresztmetszeti elválasztó paraméter - - + + - + + - Analysis feature properties Elemzési funkció tulajdonságai @@ -2993,9 +3003,12 @@ Kérjük, adjon meg egy másik fájlt. Feszültség: - - - + + + + + + @@ -3008,18 +3021,15 @@ Kérjük, adjon meg egy másik fájlt. + + + - - - - - - unspecified határozatlan @@ -3061,16 +3071,16 @@ harmonikus/rezgő hajtóerővel rendelkező egyenletek esetén A peremfeltétel az elektromos erőre vonatkozik-e + - Real Valós + - Imaginary Elképzelt @@ -3090,9 +3100,9 @@ harmonikus/rezgő hajtóerővel rendelkező egyenletek esetén A skalárpotenciál képzetes része + - x x @@ -3111,9 +3121,9 @@ Note: has no effect if a solid was selected Megjegyzés: nincs hatása, ha szilárdtestet választottunk ki + - y y @@ -3132,9 +3142,9 @@ Note: has no effect if a solid was selected Megjegyzés: nincs hatása, ha szilárdtestet választottunk ki + - z z @@ -3184,8 +3194,8 @@ Megjegyzés: nincs hatása, ha szilárdtestet választottunk ki Gerendaszakasz paraméter - + Cross section parameter Keresztmetszeti paraméter @@ -3236,30 +3246,30 @@ Megjegyzés: nincs hatása, ha szilárdtestet választottunk ki Forgás: - - - + + + formula képlet - + Velocity x: Sebesség x: - + Velocity y: Sebesség y: - + Velocity z: Sebesség z: @@ -3389,14 +3399,14 @@ Megjegyzés: 2D esetén csak az x beállítása lehetséges, A potenciális y-komponens képzetes része - + Real part of potential z-component A potenciális z-komponens valós része - + Imaginary part of potential z-component A potenciális z-komponens képzetes része @@ -3514,26 +3524,26 @@ Megjegyzés: 2D esetén csak az x beállítása lehetséges, Mégse - - - - - - - + + + + + + + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - - - - - - - + + + + + + + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? @@ -3614,7 +3624,7 @@ Megjegyzés: 2D esetén csak az x beállítása lehetséges, Csoportok - + Are you sure you want to continue? Biztosan folytatja? @@ -3669,7 +3679,7 @@ Megjegyzés: 2D esetén csak az x beállítása lehetséges, Helyi koordináta rendszer - + Edit analysis feature Elemzési tulajdonság szerkesztése @@ -4007,7 +4017,7 @@ A lehetséges változókat lásd az alábbi leírási mezőben. Std_Delete - + Object dependencies Objektumfüggőségek @@ -4231,22 +4241,22 @@ A lehetséges változókat lásd az alábbi leírási mezőben. Clearance Adjustment - Clearance Adjustment + Hézag igazítás Enable Friction - Enable Friction + Súrlódás engedélyezése Friction Coefficient - Friction Coefficient + Súrlódási együttható Stick Slope - Stick Slope + Dőlésszög diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index 27d931b702..b5137dba82 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Nomor eigenmode - + High frequency limit Batas frekuensi tinggi - - + + Hz Hz - + Low frequency limit Batas frekuensi rendah @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktifkan analisis @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Bahan @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel TextLabel @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parameter @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Membatalkan - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Kelompok - + Are you sure you want to continue? Apakah yakin ingin melanjutkan? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Objek dependensi diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 910e73b0bd..3c2e68c063 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Scala Iterativa - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Geometria non lineare - + Use non-linear geometry Usa geometria non lineare - + Time incrementation control parameter Parametro di controllo dell'incremento temporale - + Use non ccx defaults Usa valori predefiniti non ccx - + Time Initial Step Tempo passo iniziale - - + + s s - + Time End Tempo finale - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D Esito 3D, non controllato per 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Tipo di analisi (transitorio o stato stazionario) - + Use steady state Usa stato stazionario - + Maximum number of iterations Numero massimo di iterazioni - + Frequency defaults Frequenza predefinita - + Eigenmode number Numero Eigenmode - + High frequency limit Limite di alta frequenza - - + + Hz Hz - + Low frequency limit Limite di bassa frequenza @@ -2156,7 +2166,7 @@ Specify another file please. Only one type of selection (vertex, face or edge) per analysis feature allowed! - Only one type of selection (vertex, face or edge) per analysis feature allowed! + È permesso solo un tipo di selezione (vertice, faccia o bordo) per funzione di analisi! @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Attivare l'analisi @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material Materiale FEM + - Material Materiale @@ -2576,9 +2586,9 @@ Specify another file please. Nome del materiale + - TextLabel Etichetta Testo @@ -2925,20 +2935,20 @@ Specify another file please. Enable Adjust - Enable Adjust + Abilita aggiustamento - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parametro @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified non specificato @@ -3071,16 +3081,16 @@ con una forza motrice armonica/oscillante Whether the boundary condition is for the electric force + - Real Reale + - Imaginary Immaginario @@ -3100,9 +3110,9 @@ con una forza motrice armonica/oscillante Parte immaginaria del potenziale scalare + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Nota: non ha effetto se è stato selezionato un solido + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Nota: non ha effetto se è stato selezionato un solido + - z z @@ -3194,8 +3204,8 @@ Nota: non ha effetto se è stato selezionato un solido Parametro sezione trave - + Cross section parameter Parametro sezione trasversale @@ -3246,30 +3256,30 @@ Nota: non ha effetto se è stato selezionato un solido Rotazione: - - - + + + formula formula - + Velocity x: Velocità x: - + Velocity y: Velocità y: - + Velocity z: Velocità z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Annulla - - - - - - - + + + + + + + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - - - - - - - + + + + + + + Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Gruppi - + Are you sure you want to continue? Sei sicuro di voler continuare? @@ -3636,27 +3646,27 @@ Note: for 2D only setting for x is possible, Displacement boundary condition - Condizione limite di spostamento + Displacement boundary condition Fixed boundary condition - Condizione limite fissata + Fixed boundary condition Fluid boundary condition - Condizione di contorno fluido + Fluid boundary condition Force load - Forza carico + Force load Heat flux load - Carico di flusso termico + Heat flux load @@ -3666,20 +3676,20 @@ Note: for 2D only setting for x is possible, Pressure load - Carico di pressione + Pressure load Temperature boundary condition - Condizione limite temperatura + Temperature boundary condition Local coordinate system - Sistema di coordinate locali + Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ Per le variabili possibili, vedere la casella di descrizione qui sotto. Std_Delete - + Object dependencies Dipendenze dell'oggetto @@ -4241,22 +4251,22 @@ Per le variabili possibili, vedere la casella di descrizione qui sotto. Clearance Adjustment - Clearance Adjustment + Regolazione distanza Enable Friction - Enable Friction + Abilita attrito Friction Coefficient - Friction Coefficient + Coefficiente di attrito Stick Slope - Stick Slope + Pendenza in aderenza @@ -5957,7 +5967,7 @@ used for the Elmer solver Max Principal Stress - Max Principal Stress + Sollecitazione principale massima @@ -5967,7 +5977,7 @@ used for the Elmer solver Mass Flow Rate - Mass Flow Rate + Flusso Di Massa @@ -5977,7 +5987,7 @@ used for the Elmer solver Min Principal Stress - Min Principal Stress + Sollecitazione principale minima diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 7072024550..9c160e615e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling 反復スケーリング - + Iterative Cholesky 反復コレスキー - + Non-linear geometry 非線形ジオメトリー - + Use non-linear geometry 非線形ジオメトリーを使用 - + Time incrementation control parameter 時間増分制御パラメーター - + Use non ccx defaults 非CCXのデフォルトを使用 - + Time Initial Step 時間の初期ステップ - - + + s 秒 - + Time End 終了時間 - + Beam, shell element 3D output format ビーム、シェル要素の 3D 出力フォーマット - + 3D Output, unchecked for 2D 3D 出力。2D の場合はチェックを外してください。 - + Thermo mechanical defaults 熱機械のデフォルト - + Analysis type (transient or steady state) 解析タイプ (非定常状態/定常状態) - + Use steady state 定常状態を使用 - + Maximum number of iterations 最大繰り返し数 - + Frequency defaults 周波数デフォルト - + Eigenmode number 固有モード番号 - + High frequency limit 高周波数制限 - - + + Hz Hz - + Low frequency limit 低周波数制限 @@ -2510,7 +2520,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis 解析をアクティブ化 @@ -2531,15 +2541,15 @@ Specify another file please. FemMaterial - + FEM material FEM 材料 + - Material マテリアル @@ -2564,9 +2574,9 @@ Specify another file please. 材料名 + - TextLabel テキストラベル @@ -2916,17 +2926,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2936,11 +2946,11 @@ Specify another file please. 遠心荷重パラメーター + - - + Parameter パラメーター @@ -2970,13 +2980,13 @@ Specify another file please. 断面表示パラメーター - - + + - + + - Analysis feature properties Analysis feature properties @@ -2991,9 +3001,12 @@ Specify another file please. ポテンシャル: - - - + + + + + + @@ -3006,18 +3019,15 @@ Specify another file please. + + + - - - - - - unspecified 未指定 @@ -3058,16 +3068,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real 実部 + - Imaginary 虚部 @@ -3087,9 +3097,9 @@ with a harmonic/oscillating driving force スカラーポテンシャルの虚部 + - x x @@ -3108,9 +3118,9 @@ Note: has no effect if a solid was selected 注意: ソリッドが選択されている場合は無効 + - y y @@ -3129,9 +3139,9 @@ Note: has no effect if a solid was selected 注意: ソリッドが選択されている場合は無効 + - z z @@ -3181,8 +3191,8 @@ Note: has no effect if a solid was selected ビームセクションパラメーター - + Cross section parameter 断面パラメーター @@ -3233,30 +3243,30 @@ Note: has no effect if a solid was selected 回転: - - - + + + formula 式 - + Velocity x: 速度 x: - + Velocity y: 速度 y: - + Velocity z: 速度 z: @@ -3380,14 +3390,14 @@ Note: for 2D only setting for x is possible, ポテンシャル y 成分の虚部 - + Real part of potential z-component ポテンシャル z 成分の実部 - + Imaginary part of potential z-component ポテンシャル z 成分の虚部 @@ -3505,26 +3515,26 @@ Note: for 2D only setting for x is possible, キャンセル - - - - - - - + + + + + + + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - - - - - - - + + + + + + + Do you want to close this dialog? このダイアログを閉じますか？ @@ -3605,7 +3615,7 @@ Note: for 2D only setting for x is possible, グループ - + Are you sure you want to continue? 本当に続行しますか？ @@ -3660,7 +3670,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -3996,7 +4006,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies オブジェクトの依存関係 @@ -5250,7 +5260,7 @@ used for the Elmer solver Mesh - メッシュ + Mesh diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index c35f9c8bb5..73ae7ce1b7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -24,7 +24,7 @@ Fem - Fem + სემ @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles კოჭები - + Iterative Scaling იტერაციული მასშტაბირება - + Iterative Cholesky ჩოლესკის იტერაცია - + Non-linear geometry არახაზოვანი გეომეტრია - + Use non-linear geometry არახაზოვანი გეომეტრიის გამოყენება - + Time incrementation control parameter დროის გაზრდის კონტროლის პარამეტრი - + Use non ccx defaults არ გამოიყენო ccx-ს ნაგულისხმევი მნიშვნელობები - + Time Initial Step დროის საწყისი ბიჯი - - + + s s - + Time End დასასრულის დრო - + Beam, shell element 3D output format კოჭის და გარსის 3D გამოტანის ფორმატი - + 3D Output, unchecked for 2D 3D გამოტანა. გამორთულია 2D-სთვის - + Thermo mechanical defaults თერმომექანიკური მახასიათებლები - + Analysis type (transient or steady state) ანალიზის ტიპი (გარდამავალი ან სტაბილური მდგომარეობა) - + Use steady state სტაბილური მდგომარეობის გამოყენება - + Maximum number of iterations იტერაციების მაქსიმალური რაოდენობა - + Frequency defaults სიხშირის ნაგულისხმევი მნიშვნელობები - + Eigenmode number აიგენმოდის ნომერი - + High frequency limit მაღალი სიხშირის ლიმიტი - - + + Hz ჰც - + Low frequency limit დაბალი სიხშირის ლიმიტი @@ -1054,7 +1064,7 @@ Specify another file please. Search in known binary directories - გამშვები ფაილების ცნობილ საქაღალდეებში ძებნა + ცნობილ ბინარულ საქაღალდეებში ძებნა @@ -1525,7 +1535,7 @@ Specify another file please. Search in known binary directories - ცნობილ ბინარულ საქაღალდეებში ძებნა + გამშვები ფაილების ცნობილ საქაღალდეებში ძებნა @@ -1791,7 +1801,7 @@ Specify another file please. Input error - შეყვანის შეცდომა + Input error @@ -2516,7 +2526,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis ანალიზის აქტივაცია @@ -2537,15 +2547,15 @@ Specify another file please. FemMaterial - + FEM material სემის მასალა + - Material მასალა @@ -2570,9 +2580,9 @@ Specify another file please. მასალის სახელი + - TextLabel ტექსტური ჭდე @@ -2919,20 +2929,20 @@ Specify another file please. Enable Adjust - Enable Adjust + შერჩევის ჩართვა - - - + + + 0 mm 0 მმ @@ -2942,11 +2952,11 @@ Specify another file please. ცენტრიფუგის პარამეტრი + - - + Parameter პარამეტრი @@ -2976,13 +2986,13 @@ Specify another file please. განივი კვეთის პარამეტრი - - + + - + + - Analysis feature properties ანალიზის თვისების მორგება @@ -2997,9 +3007,12 @@ Specify another file please. პოტენციალი: - - - + + + + + + @@ -3012,18 +3025,15 @@ Specify another file please. + + + - - - - - - unspecified არ არის მითითებული @@ -3065,16 +3075,16 @@ with a harmonic/oscillating driving force არის თუ არა სასაზღვრე პირობა ელექტრული ძალისთვის + - Real რეალური + - Imaginary წარმოსახვითი @@ -3094,9 +3104,9 @@ with a harmonic/oscillating driving force სკალარული პოტენციალის წარმოსახვითი ნაწილი + - x x @@ -3115,9 +3125,9 @@ Note: has no effect if a solid was selected შენიშვნა: ეფექტი არ გააჩნია, თუ მონიშნული მყარია + - y y @@ -3136,9 +3146,9 @@ Note: has no effect if a solid was selected შენიშვნა: ეფექტი არ გააჩნია, თუ მონიშნული მყარია + - z z @@ -3188,8 +3198,8 @@ Note: has no effect if a solid was selected კოჭის სექციის პარამეტრი - + Cross section parameter განივი გადანაჭერის პარამეტრი @@ -3240,30 +3250,30 @@ Note: has no effect if a solid was selected ბრუნვა: - - - + + + formula ფორმულა - + Velocity x: აჩქარება X: - + Velocity y: აჩქარება Y: - + Velocity z: აჩქარება Z: @@ -3393,14 +3403,14 @@ Note: for 2D only setting for x is possible, Y-კომპონენტის პოტენციალის წარმოდგენითი ნაწილი - + Real part of potential z-component Z-კომპონენტის პოტენციალის რეალური ნაწილი - + Imaginary part of potential z-component Z-კომპონენტის პოტენციალის წარმოდგენითი ნაწილი @@ -3518,26 +3528,26 @@ Note: for 2D only setting for x is possible, გაუქმება - - - - - - - + + + + + + + A dialog is already open in the task panel ფანჯარა უკვე ღიაა ამოცანების პანელზე - - - - - - - + + + + + + + Do you want to close this dialog? ნამდვილად გსურთ ამ ფანჯრის დახურვა? @@ -3618,7 +3628,7 @@ Note: for 2D only setting for x is possible, ჯგუფები - + Are you sure you want to continue? დარწმუნებული ბრძანდებით, რომ გნებავთ, გააგრძელოთ? @@ -3673,7 +3683,7 @@ Note: for 2D only setting for x is possible, ლოკალური კოორდინატების სისტემა - + Edit analysis feature ანალიზის თვისების ჩასწორება @@ -4011,7 +4021,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies ობიექტის დამოკიდებულებები @@ -4054,7 +4064,7 @@ For possible variables, see the description box below. Box - Box + ყუთი @@ -4235,22 +4245,22 @@ For possible variables, see the description box below. Clearance Adjustment - Clearance Adjustment + გაბარიტების გასწორება Enable Friction - Enable Friction + ხახუნის ჩართვა Friction Coefficient - Friction Coefficient + ხახუნის კოეფიციენტი Stick Slope - Stick Slope + ჯოხის დახრა @@ -5267,7 +5277,7 @@ used for the Elmer solver Mesh - ბადე + Mesh @@ -5852,7 +5862,7 @@ used for the Elmer solver Remove - წაშლა + მოცილება @@ -6215,7 +6225,7 @@ Please select a result type first. Fem - სემ + Fem diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index 607d5467f9..5723fdf8fe 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -24,7 +24,7 @@ Fem - Fem + 유한요소 방법 @@ -42,7 +42,7 @@ Fem - 유한요소 방법 + 유한 요소 방법 @@ -78,7 +78,7 @@ Fem - 유한 요소 방법 + 유한요소 방법 @@ -96,7 +96,7 @@ Fem - 유한요소 방법 + 유한 요소 방법 @@ -132,7 +132,7 @@ Fem - 유한 요소 방법 + 유한요소 방법 @@ -150,7 +150,7 @@ Fem - 유한요소 방법 + Fem @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Eigenmode number - + High frequency limit High frequency limit - - + + Hz Hz - + Low frequency limit Low frequency limit @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activate analysis @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material 재료 @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel 텍스트 라벨 @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter 매개 변수 @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected 회전: - - - + + + formula 수식 - + Velocity x: X 축 방향 속도 - + Velocity y: Y 축 방향 속도 - + Velocity z: Z 축 방향 속도 @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, 취소하기 - - - - - - - + + + + + + + A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. - - - - - - - + + + + + + + Do you want to close this dialog? 다이얼로그를 닫으시겠습니까? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, 묶음 - + Are you sure you want to continue? Are you sure you want to continue? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4014,7 +4024,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies 객체 종속성 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index 1487f03511..515c80ac1d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Tijd einde - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Gebruik vaste toestand - + Maximum number of iterations Maximum aantal herhalingen - + Frequency defaults Frequentie standaard - + Eigenmode number Eigenmode nummer - + High frequency limit Top frequentie limiet - - + + Hz Hz - + Low frequency limit Onder frequentie limiet @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activeer analyse @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM materiaal + - Material Materiaal @@ -2576,9 +2586,9 @@ Specify another file please. Materiaalnaam + - TextLabel Tekstbenaming @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parameter @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potentieel: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified ongespecificeerd @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Echt + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotatie: - - - + + + formula formule - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Annuleren - - - - - - - + + + + + + + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - - - - - - - + + + + + + + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Groepen - + Are you sure you want to continue? Weet u zeker dat u wilt doorgaan? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Object afhankelijkheden diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index b7300407ae..6e58d7be30 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -513,7 +513,7 @@ Wrong selection - Nieprawidłowy wybór + Niewłaściwy wybór @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Solver równań Spooles - + Iterative Scaling Solver iteracyjny typu scaling - + Iterative Cholesky Solver iteracyjny typu Cholesky - + Non-linear geometry Geometria nieliniowa - + Use non-linear geometry Uwzględnij nieliniowość geometryczną - + Time incrementation control parameter Parametr kontroli przyrostów czasu - + Use non ccx defaults Użyj domyślnych ustawień innych niż Calculix - + Time Initial Step Początkowy krok czasu - - + + s s - + Time End Koniec czasu - + Beam, shell element 3D output format Format 3D wyników dla belek i powłok - + 3D Output, unchecked for 2D Wyniki 3D, odznaczone dla 2D - + Thermo mechanical defaults Domyślne ustawienia termomechaniczne - + Analysis type (transient or steady state) Typ analizy (stan nieustalony lub ustalony) - + Use steady state Użyj stanu ustalonego - + Maximum number of iterations Maksymalna liczba iteracji - + Frequency defaults Ustawienia domyślne analizy częstotliwości - + Eigenmode number Numer postaci własnej - + High frequency limit Górna granica częstotliwości - - + + Hz Hz - + Low frequency limit Dolna granica częstotliwości @@ -2069,7 +2079,7 @@ Proszę, wybierz inny. Wrong selection - Niewłaściwy wybór + Nieprawidłowy wybór @@ -2515,7 +2525,7 @@ Proszę, wybierz inny. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktywowanie analizy @@ -2536,15 +2546,15 @@ Proszę, wybierz inny. FemMaterial - + FEM material Materiał MES + - Material Materiał @@ -2569,9 +2579,9 @@ Proszę, wybierz inny. Nazwa materiału + - TextLabel Etykieta tekstu @@ -2918,20 +2928,20 @@ Proszę, wybierz inny. Enable Adjust - Enable Adjust + Włącz regulację - - - + + + 0 mm 0 mm @@ -2941,11 +2951,11 @@ Proszę, wybierz inny. Parametr obrotu + - - + Parameter Parametr @@ -2975,13 +2985,13 @@ Proszę, wybierz inny. Parametr wyników z przekroju - - + + - + + - Analysis feature properties Właściwości cech analizy @@ -2996,9 +3006,12 @@ Proszę, wybierz inny. Potencjał: - - - + + + + + + @@ -3011,18 +3024,15 @@ Proszę, wybierz inny. + + + - - - - - - unspecified nieokreślony @@ -3064,16 +3074,16 @@ z harmoniczną / oscylującą siłą napędzającą Czy warunek brzegowy dotyczy siły elektrycznej + - Real Rzeczywisty + - Imaginary Urojony @@ -3093,9 +3103,9 @@ z harmoniczną / oscylującą siłą napędzającą Urojona część potencjału skalarnego + - x x @@ -3114,9 +3124,9 @@ Note: has no effect if a solid was selected Uwaga: bez efektu, jeśli wybrano bryłę + - y y @@ -3135,9 +3145,9 @@ Note: has no effect if a solid was selected Uwaga: bez efektu, jeśli wybrano bryłę + - z z @@ -3187,8 +3197,8 @@ Uwaga: bez efektu, jeśli wybrano bryłę Parametr sekcji belki - + Cross section parameter Parametr przekroju poprzecznego @@ -3239,30 +3249,30 @@ Uwaga: bez efektu, jeśli wybrano bryłę Obrót: - - - + + + formula wzór - + Velocity x: Prędkość x: - + Velocity y: Prędkość y: - + Velocity z: Prędkość z: @@ -3392,14 +3402,14 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Urojona część składowej y potencjału - + Real part of potential z-component Rzeczywista część składowej z potencjału - + Imaginary part of potential z-component Urojona część składowej z potencjału @@ -3517,26 +3527,26 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Anuluj - - - - - - - + + + + + + + A dialog is already open in the task panel Okienko dialogowe jest już otwarte w panelu zadań - - - - - - - + + + + + + + Do you want to close this dialog? Czy chcesz zamknąć to okno? @@ -3617,7 +3627,7 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Grupy - + Are you sure you want to continue? Czy na pewno chcesz kontynuować? @@ -3672,7 +3682,7 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Lokalny układ współrzędnych - + Edit analysis feature Edytuj cechę analizy @@ -3712,7 +3722,7 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Max Principal Stress - I naprężenie główne + Maksymalne naprężenie główne @@ -3722,7 +3732,7 @@ Uwaga: w 2D tylko ustawienie dla x jest możliwe, Min Principal Stress - III naprężenia główne + Minimalne naprężenie główne @@ -4010,7 +4020,7 @@ Aby uzyskać możliwe zmienne, zobacz pole opisu poniżej. Std_Delete - + Object dependencies Zależności obiektu @@ -4234,22 +4244,22 @@ Aby uzyskać możliwe zmienne, zobacz pole opisu poniżej. Clearance Adjustment - Clearance Adjustment + Tolerancja dociągania węzłów Enable Friction - Enable Friction + Uwzględnij tarcie Friction Coefficient - Friction Coefficient + Współczynnik tarcia Stick Slope - Stick Slope + Nachylenie krzywej przylegania @@ -5949,7 +5959,7 @@ sprężystość (naprężenia) Max Principal Stress - I naprężenie główne + Maksymalne naprężenie główne @@ -5969,7 +5979,7 @@ sprężystość (naprężenia) Min Principal Stress - III naprężenia główne + Minimalne naprężenie główne diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index c99c350e1a..6593da3379 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Escala Iterativa - + Iterative Cholesky Cholesky Iterativo - + Non-linear geometry Geometria não-linear - + Use non-linear geometry Utilizar não-linearidade geométrica - + Time incrementation control parameter Parâmetro de controle de incremento de tempo - + Use non ccx defaults Usar padrões não ccx - + Time Initial Step Passo Inicial de Tempo - - + + s s - + Time End Tempo final - + Beam, shell element 3D output format Viga, formato de saída do elemento 3D - + 3D Output, unchecked for 2D Saída 3D, desmarcada para 2D - + Thermo mechanical defaults Parâmetros termo-mecânicos padrão - + Analysis type (transient or steady state) Tipo de análise (transiente ou permanente) - + Use steady state Utilizar regime permanente - + Maximum number of iterations Número máximo de iterações - + Frequency defaults Parâmetros padrão de frequência - + Eigenmode number Número de Eigenmode - + High frequency limit Limite de alta freqüência - - + + Hz  Hz - + Low frequency limit Limite de baixa frequência @@ -2520,7 +2530,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Ativar análises @@ -2541,15 +2551,15 @@ Specify another file please. FemMaterial - + FEM material Material FEM + - Material Material @@ -2574,9 +2584,9 @@ Specify another file please. Nome do material + - TextLabel Rótulo de texto @@ -2926,17 +2936,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2946,11 +2956,11 @@ Specify another file please. Parâmetro de centrífuga + - - + Parameter Parâmetro @@ -2980,13 +2990,13 @@ Specify another file please. Parâmetros de impressão de seções - - + + - + + - Analysis feature properties Analysis feature properties @@ -3001,9 +3011,12 @@ Specify another file please. Potencial: - - - + + + + + + @@ -3016,18 +3029,15 @@ Specify another file please. + + + - - - - - - unspecified não especificado @@ -3069,16 +3079,16 @@ com forças atuantes harmônicas/oscilantes Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginário @@ -3098,9 +3108,9 @@ com forças atuantes harmônicas/oscilantes Parte imaginária de potencial escalar + - x x @@ -3119,9 +3129,9 @@ Note: has no effect if a solid was selected Nota: não surge efeito se um sólido foi selecionado + - y y @@ -3140,9 +3150,9 @@ Note: has no effect if a solid was selected Nota: não surge efeito se um sólido foi selecionado + - z z @@ -3192,8 +3202,8 @@ Nota: não surge efeito se um sólido foi selecionado Parâmetro da seção da viga - + Cross section parameter Cross section parameter @@ -3244,30 +3254,30 @@ Nota: não surge efeito se um sólido foi selecionado Rotação: - - - + + + formula fórmula - + Velocity x: Velocidade x: - + Velocity y: Velocidade y: - + Velocity z: Velocidade z: @@ -3397,14 +3407,14 @@ Nota: para configuração apenas 2D para x é possível, Parte imaginária de componente-y potencial - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Parte imaginária de componente-z potencial @@ -3522,26 +3532,26 @@ Nota: para configuração apenas 2D para x é possível, Cancelar - - - - - - - + + + + + + + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - - - - - - - + + + + + + + Do you want to close this dialog? Deseja fechar este diálogo? @@ -3622,7 +3632,7 @@ Nota: para configuração apenas 2D para x é possível, Grupos - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3677,7 +3687,7 @@ Nota: para configuração apenas 2D para x é possível, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4015,7 +4025,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependências do objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 20fea02e8c..e6caf434bd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Número de Eigenmode - + High frequency limit Limite de alta frequência - - + + Hz Hz - + Low frequency limit Limite de baixa frequência @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Ativar análise @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Material @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel Rótulo de texto @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parâmetro @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Cancelar - - - - - - - + + + + + + + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - - - - - - - + + + + + + + Do you want to close this dialog? Deseja fechar esta janela? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Grupos - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependências do objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 6d5a96270c..e3787ce29e 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Scalare Iterativă - + Iterative Cholesky Colesky Iterativ - + Non-linear geometry Geometrie neliniară - + Use non-linear geometry Folosește geometria neliniară - + Time incrementation control parameter Parametrul de control incrementare în timp - + Use non ccx defaults Folosește valorile implicite non-cx - + Time Initial Step Etapa inițială de timp - - + + s S - + Time End Sfârșit timp - + Beam, shell element 3D output format Beam, format ieșire 3D element shell - + 3D Output, unchecked for 2D Ieșire 3D, neselectată pentru 2D - + Thermo mechanical defaults Termo mecanic implicit - + Analysis type (transient or steady state) Tipul analizei (caracter tranzitoriu sau constant) - + Use steady state Folosește starea de echilibru - + Maximum number of iterations Numărul maxim de iterații - + Frequency defaults Frecvenţa prestabilită - + Eigenmode number Numărul de mod propriu - + High frequency limit Limita de frecvenţă înaltă - - + + Hz Hz - + Low frequency limit Limita de frecvenţă joasă @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activează analiza @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Materialul @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel TextLabel @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parametru @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Renunţă - - - - - - - + + + + + + + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - - - - - - - + + + + + + + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Grupuri - + Are you sure you want to continue? Are you sure you want to continue? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependențe obiect diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index ab9f947b97..0587dc71e4 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -24,7 +24,7 @@ Fem - МКЭ (метод конечных элементов) + Мкэ (метод конечных элементов) @@ -42,7 +42,7 @@ Fem - Мкэ (метод конечных элементов) + МКЭ (метод конечных элементов) @@ -497,7 +497,7 @@ Fem - МКЭ (метод конечных элементов) + Мкэ (метод конечных элементов) @@ -513,7 +513,7 @@ Wrong selection - Неправильный выбор + Неправильное выделение @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles SPOOLES - + Iterative Scaling Итеративное масштабирование - + Iterative Cholesky Интерактивное разложение Холецкого - + Non-linear geometry Нелинейная геометрия - + Use non-linear geometry Использовать нелинейную геометрию - + Time incrementation control parameter Параметр управления приращением времени - + Use non ccx defaults Использовать значения по умолчанию, отличные от CalculiX - + Time Initial Step Начальный временной интервал - - + + s с - + Time End Время завершения - + Beam, shell element 3D output format Формат вывода 3D-элементов типа балки и оболочки - + 3D Output, unchecked for 2D 3D-вывод, снят флажок для 2D - + Thermo mechanical defaults Значения по умолчанию для термомеханики - + Analysis type (transient or steady state) Тип анализа (переходное или устойчивое состояние) - + Use steady state Использовать стабильное состояние - + Maximum number of iterations Максимальное количество итераций - + Frequency defaults Частота по умолчанию - + Eigenmode number Номер Обертона - + High frequency limit Граничное условие высокой частоты - - + + Hz Гц - + Low frequency limit Граничное условие низкой частоты @@ -2067,7 +2077,7 @@ Specify another file please. Wrong selection - Неправильное выделение + Неправильный выбор @@ -2513,7 +2523,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Активировать анализ @@ -2534,15 +2544,15 @@ Specify another file please. FemMaterial - + FEM material Материал МКЭ + - Material Материал @@ -2567,9 +2577,9 @@ Specify another file please. Название материала + - TextLabel Текстовая надпись @@ -2916,20 +2926,20 @@ Specify another file please. Enable Adjust - Enable Adjust + Включить регулировку - - - + + + 0 mm 0 мм @@ -2939,11 +2949,11 @@ Specify another file please. Параметр Центрифугирования + - - + Parameter Параметр @@ -2973,13 +2983,13 @@ Specify another file please. Параметр SectionPrint - - + + - + + - Analysis feature properties Свойства объекта анализа @@ -2994,9 +3004,12 @@ Specify another file please. Потенциал: - - - + + + + + + @@ -3009,18 +3022,15 @@ Specify another file please. + + + - - - - - - unspecified не указана @@ -3062,16 +3072,16 @@ with a harmonic/oscillating driving force Является ли граничное условие для электрической силы + - Real Действительная часть + - Imaginary Мнимая часть @@ -3091,9 +3101,9 @@ with a harmonic/oscillating driving force Мнимая часть скалярного потенциала + - x x @@ -3112,9 +3122,9 @@ Note: has no effect if a solid was selected Примечание: не влияет если выбрано твердое тело + - y у @@ -3133,9 +3143,9 @@ Note: has no effect if a solid was selected Примечание: не влияет если выбрано твердое тело + - z z @@ -3185,8 +3195,8 @@ Note: has no effect if a solid was selected Параметр секции балки - + Cross section parameter Поперечный параметр сечения @@ -3237,30 +3247,30 @@ Note: has no effect if a solid was selected Вращение: - - - + + + formula формула - + Velocity x: Скорость по оси x: - + Velocity y: Скорость по оси y: - + Velocity z: Скорость по оси z: @@ -3390,14 +3400,14 @@ Note: for 2D only setting for x is possible, Мнимая часть y-компоненты комплексного потенциала - + Real part of potential z-component Действительная часть z-компоненты комплексного потенциала - + Imaginary part of potential z-component Мнимая часть z-компоненты комплексного потенциала @@ -3515,26 +3525,26 @@ Note: for 2D only setting for x is possible, Отмена - - - - - - - + + + + + + + A dialog is already open in the task panel Диалог уже открыт на панели задач - - - - - - - + + + + + + + Do you want to close this dialog? Вы хотите закрыть этот диалог? @@ -3551,7 +3561,7 @@ Note: for 2D only setting for x is possible, FEM - МКЭ + Метод конечных элементов @@ -3615,7 +3625,7 @@ Note: for 2D only setting for x is possible, Группы - + Are you sure you want to continue? Вы уверены, что хотите продолжить? @@ -3670,7 +3680,7 @@ Note: for 2D only setting for x is possible, Локальная система координат - + Edit analysis feature Редактировать функцию анализа @@ -4008,7 +4018,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Зависимости объекта @@ -4051,7 +4061,7 @@ For possible variables, see the description box below. Box - Куб + Коробка @@ -4232,22 +4242,22 @@ For possible variables, see the description box below. Clearance Adjustment - Clearance Adjustment + "Выключить регулировку" Enable Friction - Enable Friction + Включить трение Friction Coefficient - Friction Coefficient + Коэффициент трения Stick Slope - Stick Slope + "Наклон ребра" @@ -4270,7 +4280,7 @@ For possible variables, see the description box below. Remove - Удалить + Убрать @@ -4558,7 +4568,7 @@ normal vector of the face is used as direction Remove - Убрать + Удалить @@ -5146,7 +5156,7 @@ used for the Elmer solver FEM - Метод конечных элементов + МКЭ @@ -5266,7 +5276,7 @@ used for the Elmer solver Mesh - Полигональная сетка + Сеть @@ -6028,7 +6038,7 @@ Please select a result type first. Fem - Мкэ (метод конечных элементов) + МКЭ (метод конечных элементов) diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 1048d7c420..9414cc9764 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Prevelikostenje s približevalnim ponavljanjem - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Največje število približevalnih ponavljanj - + Frequency defaults Frequency defaults - + Eigenmode number Število lastnega načina - + High frequency limit Omejitev visoke frekvence - - + + Hz Hz - + Low frequency limit Omejitev nizke frekvence @@ -2522,7 +2532,7 @@ Določite drugo datoteko. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktiviraj analizo @@ -2543,15 +2553,15 @@ Določite drugo datoteko. FemMaterial - + FEM material FEM material + - Material Snov @@ -2576,9 +2586,9 @@ Določite drugo datoteko. Material name + - TextLabel Besedilna oznaka @@ -2928,17 +2938,17 @@ Določite drugo datoteko. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Določite drugo datoteko. Centrif parameter + - - + Parameter Določilka @@ -2982,13 +2992,13 @@ Določite drugo datoteko. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Določite drugo datoteko. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Določite drugo datoteko. + + + - - - - - - unspecified nedoločeno @@ -3071,16 +3081,16 @@ s harminičnim oz. nihajočim gonilom Ali se robni pogoj nanaša na električno silo + - Real Dejanska + - Imaginary Namišljena @@ -3100,9 +3110,9 @@ s harminičnim oz. nihajočim gonilom Namišljeni del skalarnega potenciala + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Opomba: nima učinka, če je izbrano telo + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Opomba: nima učinka, če je izbrano telo + - z z @@ -3194,8 +3204,8 @@ Opomba: nima učinka, če je izbrano telo Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Opomba: nima učinka, če je izbrano telo Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Opomba: pri 2D je mogoče nastavili le x, Namišljeni del y-komponente potenciala - + Real part of potential z-component Dejanski del z-komponente potenciala - + Imaginary part of potential z-component Namišljeni del z-komponente potenciala @@ -3524,26 +3534,26 @@ Opomba: pri 2D je mogoče nastavili le x, Prekliči - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3624,7 +3634,7 @@ Opomba: pri 2D je mogoče nastavili le x, Skupine - + Are you sure you want to continue? Ali ste prepričani da želite nadaljevati? @@ -3641,7 +3651,7 @@ Opomba: pri 2D je mogoče nastavili le x, Fixed boundary condition - Pogoj nepremične zamejitve + Robni pogoj nepremičnosti @@ -3651,22 +3661,22 @@ Opomba: pri 2D je mogoče nastavili le x, Force load - Obtežba s silo + Force load Heat flux load - Obtežba s toplotnim tokom + Heat flux load Plane multi-point constraint - Ravninsko večtočkovno omejilo + Plane multi-point constraint Pressure load - Obtežba s pritiskom + Pressure load @@ -3676,10 +3686,10 @@ Opomba: pri 2D je mogoče nastavili le x, Local coordinate system - Krajevni koordinatni sistem + Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ Možne spremenljivke si oglejte v spodnjem opisnem okencu. Std_Delete - + Object dependencies Odvisnosti predmetov diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts index e47a162718..7abc625037 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts @@ -24,7 +24,7 @@ Fem - Fem + MKE @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Nelinearna geometrija - + Use non-linear geometry Koristi nelinearnu geometriju - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Izlazni 3D format greda i šupljih elemenata - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maksimalan broj iteracija - + Frequency defaults Frequency defaults - + Eigenmode number Eigenmode number - + High frequency limit High frequency limit - - + + Hz Hz - + Low frequency limit Low frequency limit @@ -2521,7 +2531,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activate analysis @@ -2542,15 +2552,15 @@ Specify another file please. FemMaterial - + FEM material MKE materijal + - Material Materijal @@ -2575,9 +2585,9 @@ Specify another file please. Ime materijala + - TextLabel Tekstualna oznaka @@ -2927,17 +2937,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2947,11 +2957,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parametar @@ -2981,13 +2991,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3002,9 +3012,12 @@ Specify another file please. Potencijal: - - - + + + + + + @@ -3017,18 +3030,15 @@ Specify another file please. + + + - - - - - - unspecified neodređeno @@ -3070,16 +3080,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Realni deo + - Imaginary Imaginarni deo @@ -3099,9 +3109,9 @@ with a harmonic/oscillating driving force Imaginarni deo skalarnog potencijala + - x x @@ -3120,9 +3130,9 @@ Note: has no effect if a solid was selected Napomena: nema efekta ako je izabrano puno telo + - y y @@ -3141,9 +3151,9 @@ Note: has no effect if a solid was selected Napomena: nema efekta ako je izabrano puno telo + - z z @@ -3193,8 +3203,8 @@ Napomena: nema efekta ako je izabrano puno telo Parametri poprečnog preseka grede - + Cross section parameter Parametri poprečnog preseka @@ -3245,30 +3255,30 @@ Napomena: nema efekta ako je izabrano puno telo Rotacija: - - - + + + formula formula - + Velocity x: Brzina x: - + Velocity y: Brzina y: - + Velocity z: Brzina z: @@ -3398,14 +3408,14 @@ Note: for 2D only setting for x is possible, Imaginarni deo y-komponente potencijala - + Real part of potential z-component Realni deo z-komponente potencijala - + Imaginary part of potential z-component Imaginarni deo z-komponente potencijala @@ -3523,26 +3533,26 @@ Note: for 2D only setting for x is possible, Otkaži - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3623,7 +3633,7 @@ Note: for 2D only setting for x is possible, Grupe - + Are you sure you want to continue? Da li si siguran da želiš da nastaviš? @@ -3675,10 +3685,10 @@ Note: for 2D only setting for x is possible, Local coordinate system - Lokalni koordinatni sistem + Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4016,7 +4026,7 @@ Za moguće promenljive, pogledaj okvir za opis ispod. Std_Delete - + Object dependencies Međuzavisnosti objekata @@ -6037,7 +6047,7 @@ Please select a result type first. Fem - MKE + Fem diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index f0a4d87eeb..fcdec3b2bb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -24,7 +24,7 @@ Fem - Fem + МКЕ @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Нелинеарна геометрија - + Use non-linear geometry Користи нелинеарну геометрију - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Излазни 3Д формат греда и шупљих елемената - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Максималан број итерација - + Frequency defaults Frequency defaults - + Eigenmode number Eigenmode number - + High frequency limit High frequency limit - - + + Hz Hz - + Low frequency limit Low frequency limit @@ -2521,7 +2531,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activate analysis @@ -2542,15 +2552,15 @@ Specify another file please. FemMaterial - + FEM material МКЕ материјал + - Material Материјал @@ -2575,9 +2585,9 @@ Specify another file please. Име материјала + - TextLabel Текстуална ознака @@ -2927,17 +2937,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2947,11 +2957,11 @@ Specify another file please. Centrif parameter + - - + Parameter Параметар @@ -2981,13 +2991,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3002,9 +3012,12 @@ Specify another file please. Потенцијал: - - - + + + + + + @@ -3017,18 +3030,15 @@ Specify another file please. + + + - - - - - - unspecified неодређено @@ -3070,16 +3080,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Реални део + - Imaginary Имагинарни део @@ -3099,9 +3109,9 @@ with a harmonic/oscillating driving force Имагинарни део скаларног потенцијала + - x x @@ -3120,9 +3130,9 @@ Note: has no effect if a solid was selected Напомена: нема ефекта ако је изабрано пуно тело + - y y @@ -3141,9 +3151,9 @@ Note: has no effect if a solid was selected Напомена: нема ефекта ако је изабрано пуно тело + - z z @@ -3193,8 +3203,8 @@ Note: has no effect if a solid was selected Параметри попречног пресека греде - + Cross section parameter Параметри попречног пресека @@ -3245,30 +3255,30 @@ Note: has no effect if a solid was selected Ротација: - - - + + + formula formula - + Velocity x: Брзина x: - + Velocity y: Брзина y: - + Velocity z: Брзина z: @@ -3398,14 +3408,14 @@ Note: for 2D only setting for x is possible, Имагинарни део y-компоненте потенцијала - + Real part of potential z-component Реални део z-компоненте потенцијала - + Imaginary part of potential z-component Имагинарни део z-компоненте потенцијала @@ -3523,26 +3533,26 @@ Note: for 2D only setting for x is possible, Откажи - - - - - - - + + + + + + + A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака - - - - - - - + + + + + + + Do you want to close this dialog? Да ли желите да затворите овај дијалог? @@ -3623,7 +3633,7 @@ Note: for 2D only setting for x is possible, Групе - + Are you sure you want to continue? Да ли си сигуран да желиш да наставиш? @@ -3678,7 +3688,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4016,7 +4026,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Међузависности објеката @@ -6222,7 +6232,7 @@ Please select a result type first. Fem - МКЕ + Fem diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index edfec9d94d..217948d76a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterativ skalning - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Eigenmode number - + High frequency limit High frequency limit - - + + Hz Hz - + Low frequency limit Low frequency limit @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Aktivera analys @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Material @@ -2576,9 +2586,9 @@ Specify another file please. Materialnamn + - TextLabel TextLabel @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Parameter @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified ospecificerad @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginär @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y Y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formel - + Velocity x: Hastighet x: - + Velocity y: Hastighet y: - + Velocity z: Hastighet z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Avbryt - - - - - - - + + + + + + + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - - - - - - - + + + + + + + Do you want to close this dialog? Vill du stänga denna dialogruta? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Grupper - + Are you sure you want to continue? Är du säker på att du vill fortsätta? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Objektberoenden diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 33c6200873..29185e410a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Biriktirmeler - + Iterative Scaling Tekrarlı Ölçekleme - + Iterative Cholesky Tekrarlı Cholesky - + Non-linear geometry Doğrusal olmayan geometri - + Use non-linear geometry Doğrusal olmayan geometri kullan - + Time incrementation control parameter Zaman artırma denetimi parametresi - + Use non ccx defaults ccx olmayan varsayılanları kullan - + Time Initial Step Başlanıç Adımının Zamanı - - + + s s - + Time End Bitiş zamanı - + Beam, shell element 3D output format Kiriş, kabuk elemanı 3D çıktı biçimi - + 3D Output, unchecked for 2D 2B için işaretlenmemiş 3B Çıktı - + Thermo mechanical defaults Termo mekanik varsayılanlar - + Analysis type (transient or steady state) Analiz tipi (geçici veya sabit durum) - + Use steady state Sabit durum kullan - + Maximum number of iterations En çok tekrarlama sayısı - + Frequency defaults Frekans varsayılanları - + Eigenmode number Eigenmode numarası - + High frequency limit Yüksek frekans sınırı - - + + Hz Hz - + Low frequency limit Yüksek frekans sınırı @@ -2515,7 +2525,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Sonsuz analiz @@ -2536,15 +2546,15 @@ Specify another file please. FemMaterial - + FEM material FEM malzemesi + - Material Malzeme @@ -2569,9 +2579,9 @@ Specify another file please. Malzeme adı + - TextLabel MetinEtiketi @@ -2921,17 +2931,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2941,11 +2951,11 @@ Specify another file please. Merkezkaç değişkeni + - - + Parameter Parametre @@ -2975,13 +2985,13 @@ Specify another file please. Bölüm baskısı parametresi - - + + - + + - Analysis feature properties Analysis feature properties @@ -2996,9 +3006,12 @@ Specify another file please. Potansiyel: - - - + + + + + + @@ -3011,18 +3024,15 @@ Specify another file please. + + + - - - - - - unspecified belirtilmemiş @@ -3064,16 +3074,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3093,9 +3103,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3114,9 +3124,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3135,9 +3145,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3187,8 +3197,8 @@ Note: has no effect if a solid was selected Işın kesiti değişkeni - + Cross section parameter Kesit değişkeni @@ -3239,30 +3249,30 @@ Note: has no effect if a solid was selected Dönüş: - - - + + + formula formula - + Velocity x: Hız x: - + Velocity y: Hız y: - + Velocity z: Hız z: @@ -3392,14 +3402,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3517,26 +3527,26 @@ Note: for 2D only setting for x is possible, İptal - - - - - - - + + + + + + + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - - - - - - - + + + + + + + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? @@ -3617,7 +3627,7 @@ Note: for 2D only setting for x is possible, Gruplar - + Are you sure you want to continue? Devam etmek istediğinizden emin misiniz? @@ -3672,7 +3682,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4010,7 +4020,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Nesne bağımlılıkları diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index fe08e042cf..aca6517878 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -910,108 +910,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s с - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Eigenmode number - + High frequency limit Верхня межа частоти - - + + Hz Гц - + Low frequency limit Нижня межа частоти @@ -2523,7 +2533,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Активувати аналіз @@ -2544,15 +2554,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Матеріал @@ -2577,9 +2587,9 @@ Specify another file please. Material name + - TextLabel ТекстовийНадпис @@ -2929,17 +2939,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 мм @@ -2949,11 +2959,11 @@ Specify another file please. Centrif parameter + - - + Parameter Параметр @@ -2983,13 +2993,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3004,9 +3014,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3019,18 +3032,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3072,16 +3082,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3101,9 +3111,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3122,9 +3132,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3143,9 +3153,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3195,8 +3205,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3247,30 +3257,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3400,14 +3410,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3525,26 +3535,26 @@ Note: for 2D only setting for x is possible, Скасувати - - - - - - - + + + + + + + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - - - - - - - + + + + + + + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? @@ -3625,7 +3635,7 @@ Note: for 2D only setting for x is possible, Групи - + Are you sure you want to continue? Ви впевнені, що бажаєте продовжити? @@ -3680,7 +3690,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4018,7 +4028,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Залежності обʼєктів diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 4a93926a75..f820052b06 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number Número de mode propi - + High frequency limit Límit d'alta freqüència - - + + Hz Hz - + Low frequency limit Límit de baixa freqüència @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis Activa l'anàlisi @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material Material @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel EtiquetaText @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter Paràmetre @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, Cancel·la - - - - - - - + + + + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - - - - + + + + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, Grups - + Are you sure you want to continue? Are you sure you want to continue? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies Dependències de l'objecte diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index 1fe331e2c6..bccf7980d9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles库 - + Iterative Scaling 迭代尺度法 - + Iterative Cholesky 迭代 Cholesky 法 - + Non-linear geometry 非线性几何 - + Use non-linear geometry 使用非线性几何 - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults 不使用 ccx 默认值 - + Time Initial Step Time Initial Step - - + + s 秒 - + Time End 结束时间 - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults 热力学默认值 - + Analysis type (transient or steady state) 分析类型(瞬态或稳态) - + Use steady state 稳态 - + Maximum number of iterations 最大迭代次数 - + Frequency defaults 频率默认值 - + Eigenmode number 特征模式数量 - + High frequency limit 高频限制 - - + + Hz Hz - + Low frequency limit 低频限制 @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis 启动分析 @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material 材质 @@ -2576,9 +2586,9 @@ Specify another file please. 材料名称 + - TextLabel 文本标签 @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter 参数 @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. 电位： - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified 未指定 @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real 实部 + - Imaginary 虚部 @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected 旋转: - - - + + + formula formula - + Velocity x: X方向速度： - + Velocity y: Y方向速度： - + Velocity z: Z方向速度： @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, 势能Y轴分量的虚部 - + Real part of potential z-component 势能Z轴分量的实部 - + Imaginary part of potential z-component 势能Z轴分量的虚部 @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, 取消 - - - - - - - + + + + + + + A dialog is already open in the task panel 一个对话框已在任务面板打开 - - - - - - - + + + + + + + Do you want to close this dialog? 您要关闭此对话框吗? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, 组 - + Are you sure you want to continue? 您确定要继续吗？ @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, 局部坐标系 - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies 对象依赖关系 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index a824c76de0..8292f9d081 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -911,108 +911,118 @@ + PaStiX + PaStiX + + + + Pardiso + Pardiso + + + Spooles Spooles - + Iterative Scaling Iterative Scaling - + Iterative Cholesky Iterative Cholesky - + Non-linear geometry Non-linear geometry - + Use non-linear geometry Use non-linear geometry - + Time incrementation control parameter Time incrementation control parameter - + Use non ccx defaults Use non ccx defaults - + Time Initial Step Time Initial Step - - + + s s - + Time End Time End - + Beam, shell element 3D output format Beam, shell element 3D output format - + 3D Output, unchecked for 2D 3D Output, unchecked for 2D - + Thermo mechanical defaults Thermo mechanical defaults - + Analysis type (transient or steady state) Analysis type (transient or steady state) - + Use steady state Use steady state - + Maximum number of iterations Maximum number of iterations - + Frequency defaults Frequency defaults - + Eigenmode number 特徵模式數量 - + High frequency limit 高頻限制 - - + + Hz Hz - + Low frequency limit 低頻限制 @@ -2522,7 +2532,7 @@ Specify another file please. FemGui::ViewProviderFemAnalysis - + Activate analysis 啟動分析 @@ -2543,15 +2553,15 @@ Specify another file please. FemMaterial - + FEM material FEM material + - Material 材質 @@ -2576,9 +2586,9 @@ Specify another file please. Material name + - TextLabel 文字標籤 @@ -2928,17 +2938,17 @@ Specify another file please. Enable Adjust - - - + + + 0 mm 0 mm @@ -2948,11 +2958,11 @@ Specify another file please. Centrif parameter + - - + Parameter 參數 @@ -2982,13 +2992,13 @@ Specify another file please. SectionPrint parameter - - + + - + + - Analysis feature properties Analysis feature properties @@ -3003,9 +3013,12 @@ Specify another file please. Potential: - - - + + + + + + @@ -3018,18 +3031,15 @@ Specify another file please. + + + - - - - - - unspecified unspecified @@ -3071,16 +3081,16 @@ with a harmonic/oscillating driving force Whether the boundary condition is for the electric force + - Real Real + - Imaginary Imaginary @@ -3100,9 +3110,9 @@ with a harmonic/oscillating driving force Imaginary part of scalar potential + - x x @@ -3121,9 +3131,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - y y @@ -3142,9 +3152,9 @@ Note: has no effect if a solid was selected Note: has no effect if a solid was selected + - z z @@ -3194,8 +3204,8 @@ Note: has no effect if a solid was selected Beam section parameter - + Cross section parameter Cross section parameter @@ -3246,30 +3256,30 @@ Note: has no effect if a solid was selected Rotation: - - - + + + formula formula - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: @@ -3399,14 +3409,14 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - + Real part of potential z-component Real part of potential z-component - + Imaginary part of potential z-component Imaginary part of potential z-component @@ -3524,26 +3534,26 @@ Note: for 2D only setting for x is possible, 取消 - - - - - - - + + + + + + + A dialog is already open in the task panel 於工作面板已開啟對話窗 - - - - - - - + + + + + + + Do you want to close this dialog? 您確定要關閉此對話窗嗎? @@ -3624,7 +3634,7 @@ Note: for 2D only setting for x is possible, 群組 - + Are you sure you want to continue? 您確定要繼續嗎? @@ -3679,7 +3689,7 @@ Note: for 2D only setting for x is possible, Local coordinate system - + Edit analysis feature Edit analysis feature @@ -4017,7 +4027,7 @@ For possible variables, see the description box below. Std_Delete - + Object dependencies 物件相依 diff --git a/src/Mod/Help/Resources/translations/Help.ts b/src/Mod/Help/Resources/translations/Help.ts index 0087f45b8e..d95033c422 100644 --- a/src/Mod/Help/Resources/translations/Help.ts +++ b/src/Mod/Help/Resources/translations/Help.ts @@ -13,18 +13,28 @@ Source + + + + Set this to a custom URL or the folder where the help files are located. +You can easily download the documentation for offline use by using the Addon +Manager and installing the "offline-documentation" addon. If this +field is left blank, FreeCAD will automatically search for the help files at +the default location ($USERAPPDATADIR/Mod/offline-documentation). + + Custom location - + Translation suffix: - + FreeCAD Wiki (online) @@ -39,16 +49,6 @@ This is currently not available... GitHub (online) - - - - Set this to a custom URL or the folder where the help files are located. -You can easily download the documentation for offline use by using the Addon -Manager and installing the "offline documentation" addon. If this -field is left blank, FreeCAD will automatically search for the help files at -the default location ($USERAPPDATADIR/Mod/Documentation). - - A translation suffix to use, for example "fr" @@ -56,13 +56,13 @@ to get French translation of the documentation. - + The documentation pages will be fetched from the official FreeCADwiki at https://wiki.freecad.org - + The documentation pages will be fetched from an automatic Markdown conversion of the FreeCAD wiki,hosted on FreeCAD's GitHub account. This can be styled with a custom stylesheet below and can look nicer than the wiki option. The 'Markdown' or @@ -70,60 +70,60 @@ custom stylesheet below and can look nicer than the wiki option. The 'Markd - + Markdown version (online) - + Display - + The documentation will open in a new tab inside the FreeCAD interface. - + In a FreeCAD tab - + The documentation will open in your default web browser. - + The documentation will open in a dockable dialog inside the FreeCAD window, which allows you to keep it open whlle working in the 3D view. - + You can here indicate the path to an alternative CSS file to be used to style the Markdown pages. This will only work if you have selected the Markdown version above. - + In your default web browser - + In a separate, embeddable dialog - + Options - + Custom stylesheet: @@ -159,7 +159,7 @@ Markdown version above. QObject - + General diff --git a/src/Mod/Help/Resources/translations/Help_be.qm b/src/Mod/Help/Resources/translations/Help_be.qm index 528f190b1d..879d33f387 100644 Binary files a/src/Mod/Help/Resources/translations/Help_be.qm and b/src/Mod/Help/Resources/translations/Help_be.qm differ diff --git a/src/Mod/Help/Resources/translations/Help_be.ts b/src/Mod/Help/Resources/translations/Help_be.ts index 8e9fb6ecfd..18e673ca93 100644 --- a/src/Mod/Help/Resources/translations/Help_be.ts +++ b/src/Mod/Help/Resources/translations/Help_be.ts @@ -13,18 +13,32 @@ Source Крыніца + + + + Set this to a custom URL or the folder where the help files are located. +You can easily download the documentation for offline use by using the Addon +Manager and installing the "offline-documentation" addon. If this +field is left blank, FreeCAD will automatically search for the help files at +the default location ($USERAPPDATADIR/Mod/offline-documentation). + Set this to a custom URL or the folder where the help files are located. +You can easily download the documentation for offline use by using the Addon +Manager and installing the "offline-documentation" addon. If this +field is left blank, FreeCAD will automatically search for the help files at +the default location ($USERAPPDATADIR/Mod/offline-documentation). + Custom location Карыстальніцкае месцазнаходжанне - + Translation suffix: Суфікс перакладу: - + FreeCAD Wiki (online) Вікі FreeCAD (анлайн) @@ -40,18 +54,6 @@ This is currently not available... GitHub (online) GitHub (анлайн) - - - - Set this to a custom URL or the folder where the help files are located. -You can easily download the documentation for offline use by using the Addon -Manager and installing the "offline documentation" addon. If this -field is left blank, FreeCAD will automatically search for the help files at -the default location ($USERAPPDATADIR/Mod/Documentation). - Задаць карыстальніцкі URL-адрас ці каталог, дзе знаходзяцца файлы даведкі. -Вы можаце лёгка загрузіць дакументацыю для аўтаномнага выкарыстання, калі скарыстаецеся Кіраваннем дадаткамі і ўсталюеце дадатак "аўтаномная дакументацыя". -Калі гэтае поле пакінуць пустым, FreeCAD аўтаматычна выканае пошук файлаў даведкі па першапачатковым размяшчэнні ($USERAPPDATADIR/Mod/Documentation). - A translation suffix to use, for example "fr" @@ -59,13 +61,13 @@ to get French translation of the documentation. Суфікс перакладу, які варта ўжываць, напрыклад "be", каб атрымаць пераклад дакументацыі на беларускую мову (якой, нажаль, не існуе). - + The documentation pages will be fetched from the official FreeCADwiki at https://wiki.freecad.org Старонкі дакументацыі будуць узятыя з афіцыйнай вікі FreeCAD па адрасе https://wiki.freecad.org/ - + The documentation pages will be fetched from an automatic Markdown conversion of the FreeCAD wiki,hosted on FreeCAD's GitHub account. This can be styled with a custom stylesheet below and can look nicer than the wiki option. The 'Markdown' or @@ -75,38 +77,38 @@ custom stylesheet below and can look nicer than the wiki option. The 'Markd Для атрымання аптымальных вынікаў варта ўсталяваць модуль 'Markdown' ці 'Pandoc' на Python. - + Markdown version (online) Версія Markdown (анлайн) - + Display Праецыраванне - + The documentation will open in a new tab inside the FreeCAD interface. Дакументацыя будзе адчыненая на новай укладцы ў інтэрфейсе FreeCAD. - + In a FreeCAD tab На ўкладцы FreeCAD - + The documentation will open in your default web browser. Дакументацыя будзе адчыненая ў вашым першапачатковым інтэрнэт-аглядальніку. - + The documentation will open in a dockable dialog inside the FreeCAD window, which allows you to keep it open whlle working in the 3D view. Дакументацыя будзе адчыненая ў дыялогавым акне, які замацаваны ўнутры акна FreeCAD, што дазваляе вам захоўваць яе адчыненай падчас працы ў трохмерным прадстаўленні. - + You can here indicate the path to an alternative CSS file to be used to style the Markdown pages. This will only work if you have selected the Markdown version above. @@ -114,22 +116,22 @@ Markdown version above. Будзе працаваць толькі ў тым выпадку, калі вы абралі версію Markdown вышэй. - + In your default web browser У вашым першапачатковым інтэрнэт-аглядальніку - + In a separate, embeddable dialog У асобным дыялогавым акне, які ўбудаваны - + Options Налады - + Custom stylesheet: Карыстальніцкая табліца стыляў: @@ -169,7 +171,7 @@ Markdown version above. QObject - + General Асноўныя diff --git a/src/Mod/Material/Resources/translations/Material.ts b/src/Mod/Material/Resources/translations/Material.ts index 744399e539..e67f98e89b 100644 --- a/src/Mod/Material/Resources/translations/Material.ts +++ b/src/Mod/Material/Resources/translations/Material.ts @@ -107,7 +107,7 @@ - + Context menu @@ -634,14 +634,14 @@ If unchecked, they will be sorted by their name. - + Confirm Delete - + Are you sure you want to delete the row? diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index 2b1be8eae0..38d5702bf0 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -1428,8 +1428,8 @@ If not checked, it depends on the option "Enable backlight color" will be used or black. La face inférieure d'une surface recevra le même rendu que la face supérieure. Si cette option n'est pas cochée, elle dépend de l'option "Couleur du rétroéclairage" -(préférences section Affichage → Vue 3D). Soit la couleur du rétroéclairage -sera utilisée, soit ce sera noir. +(préférences section Affichage → Vue 3D). +La couleur du rétroéclairage sera utilisée ou bien ce sera noir. diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index 4e54a636b5..760f82e11b 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -1323,7 +1323,7 @@ <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tesselação</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Define o desvio máximo da malha tesselada para a superfície. Quanto menor o valor, mais lenta a velocidade de renderização, o que resulta em maior detalhe/resolução.</span></p></body></html> @@ -1348,12 +1348,12 @@ Always export mesh as model type in 3MF format even if not a solid - Always export mesh as model type in 3MF format even if not a solid + Sempre exportar malha como modelo no formato 3MF mesmo que não seja um sólido Export 3MF files as model type - Export 3MF files as model type + Exportar arquivos 3MF como tipo de modelo @@ -1476,12 +1476,12 @@ a uma aparência suavizada. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Este é o menor ângulo entre duas faces onde as normais são calculados para um sombreamento plano.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Se o ângulo entre as normais de duas faces vizinhas é menor que o ângulo de vinco, as faces estarão sombreados suavemente em torno de sua borda comum.</p></body></html> <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Dica</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definir as normais por vértice é também chamado de<span style=" font-style:italic;">Sombreamento Phong</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">enquanto que definir as normais por face é chamado de</span>Sombreamento plano<span style=" font-style:normal;">.</span></p></body></html> diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm index 61aa1864f9..bec142ff7e 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts index 9182a4de18..088142e5a6 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts @@ -36,7 +36,7 @@ If this is checked, Features will claim their children in the tree view - Si cette case est cochée, les objets afficheront leurs enfants dans la vue en arborescence + Si cette option est cochée, les objets afficheront leurs enfants dans la vue en arborescence. @@ -46,7 +46,7 @@ If this is checked, Multmatrix Object will be Parametric - Si cette case est cochée, les objets Multimatrix seront paramétriques + Si cette option est cochée, les objets Multimatrix seront paramétriques. diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 69c22ef6ca..09abae22d3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -439,7 +439,7 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip @@ -5616,56 +5616,13 @@ in the 3D view for the sweep path. - - Part_FaceMaker - - - Bull's-eye facemaker - - - - - Supports making planar faces with holes with islands. - - - - - Simple - - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - - - - - Cheese facemaker - - - - - Supports making planar faces with holes, but no islands inside holes. - - - - - Part Extrude facemaker - - - - - Supports making faces with holes, does not support nesting. - - - QObject - + Edit %1 @@ -5756,20 +5713,20 @@ Do you want to continue? - + Face - + Edge - + Vertex @@ -6086,7 +6043,7 @@ Do you want to continue? - + Set colors... @@ -6863,4 +6820,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + + + + + Part::FaceMakerSimple + + + Simple + + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + + + + + Supports making planar faces with holes with islands. + + + + + Part::FaceMakerCheese + + + Cheese facemaker + + + + + Supports making planar faces with holes, but no islands inside holes. + + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + + + + + Supports making faces with holes, does not support nesting. + + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_be.ts b/src/Mod/Part/Gui/Resources/translations/Part_be.ts index a07abe637b..7726472a08 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_be.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_be.ts @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + Вяршыня @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Не рэалізавана. + Intersection of two faces. @@ -3068,7 +3068,7 @@ If both lengths are zero, magnitude of direction is used. Length: - Length: + Даўжыня: @@ -3642,7 +3642,7 @@ during file reading (slower but higher details). Length: - Даўжыня: + Length: @@ -5662,50 +5662,7 @@ in the 3D view for the sweep path. Input error - Памылка ўводу - - - - Part_FaceMaker - - - Bull's-eye facemaker - Майстар усенакіраваных граняў (Мішэнь яблычак) - - - - Supports making planar faces with holes with islands. - Падтрымлівае стварэнне плоскіх граняў з адтулінамі, якія могуць утрымліваць астраўкі. - - - - Simple - Просты - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Зрабіць асобную плоскую грані з кожнай ломанай лініі незалежна. Без падтрымкі для адтулін; ломаныя лініі могуць знаходзіцца ў розных плоскасцях. - - - - Cheese facemaker - Майстар перфараваных граняў (Сыр) - - - - Supports making planar faces with holes, but no islands inside holes. - Падтрымлівае стварэнне плоскіх граняў з адтулінамі, але без астраўкоў унутры адтулін. - - - - Part Extrude facemaker - Майстар граняў выдушвання дэталяў - - - - Supports making faces with holes, does not support nesting. - Падтрымлівае стварэнне граняў з адтулінамі, укладзеннасць не падтрымліваецца. + Input error @@ -5713,8 +5670,8 @@ in the 3D view for the sweep path. - + Edit %1 Змяніць %1 @@ -5806,22 +5763,22 @@ Do you want to continue? Без абраных спасылак - + Face Грань - + Edge Рабро - + Vertex - Вяршыня + Vertex @@ -6136,7 +6093,7 @@ Do you want to continue? Ачысціць усе вымярэнні - + Set colors... Задаць колеры... @@ -6928,4 +6885,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. Усе фільтры выбару ачышчаныя + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Просты + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Зрабіць асобную плоскую грані з кожнай ломанай лініі незалежна. Без падтрымкі для адтулін; ломаныя лініі могуць знаходзіцца ў розных плоскасцях. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Майстар усенакіраваных граняў (Мішэнь яблычак) + + + + Supports making planar faces with holes with islands. + Падтрымлівае стварэнне плоскіх граняў з адтулінамі, якія могуць утрымліваць астраўкі. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Майстар перфараваных граняў (Сыр) + + + + Supports making planar faces with holes, but no islands inside holes. + Падтрымлівае стварэнне плоскіх граняў з адтулінамі, але без астраўкоў унутры адтулін. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Майстар граняў выдушвання дэталяў + + + + Supports making faces with holes, does not support nesting. + Падтрымлівае стварэнне граняў з адтулінамі, укладзеннасць не падтрымліваецца. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index b57cc19b5f..e80fd3250d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + Vèrtex @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - No implementat. + Intersection of two faces. @@ -5657,56 +5657,13 @@ in the 3D view for the sweep path. Error d'entrada - - Part_FaceMaker - - - Bull's-eye facemaker - Facemaker d'ull de bou - - - - Supports making planar faces with holes with islands. - Suports fer cares planes amb forats amb illes. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Fer plano cara separats de cada filferro independentment. Cap suport per a forats; cables poden ser en diferents plànols. - - - - Cheese facemaker - Formatge facemaker - - - - Supports making planar faces with holes, but no islands inside holes. - Suports fer cares planes amb forats, però no les Illes dins els forats. - - - - Part Extrude facemaker - Primera part Extrudir facemaker - - - - Supports making faces with holes, does not support nesting. - Fer cares amb forats de suports, no admet la nidificació. - - QObject - + Edit %1 Editar %1 @@ -5798,22 +5755,22 @@ Do you want to continue? Cap referència seleccionat - + Face Cara - + Edge Vora - + Vertex - Vèrtex + Vertex @@ -6128,7 +6085,7 @@ Do you want to continue? Esborra totes les dimensions - + Set colors... Conjunts de colors... @@ -6919,4 +6876,64 @@ Es pot utilitzar un "Filtre compost" per extreure les peces restants.All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Fer plano cara separats de cada filferro independentment. Cap suport per a forats; cables poden ser en diferents plànols. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Facemaker d'ull de bou + + + + Supports making planar faces with holes with islands. + Suports fer cares planes amb forats amb illes. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Formatge facemaker + + + + Supports making planar faces with holes, but no islands inside holes. + Suports fer cares planes amb forats, però no les Illes dins els forats. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Primera part Extrudir facemaker + + + + Supports making faces with holes, does not support nesting. + Fer cares amb forats de suports, no admet la nidificació. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 68784901db..38273373ea 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Není implementováno. + Intersection of two faces. @@ -3637,7 +3637,7 @@ složeniny (pomalejší ale s podrobnějšími detaily). Parameter - Parametr + Parametry @@ -5624,7 +5624,7 @@ in the 3D view for the sweep path. Parameter - Parametry + Parametr @@ -5667,56 +5667,13 @@ in the 3D view for the sweep path. Chyba zadání - - Part_FaceMaker - - - Bull's-eye facemaker - Terčové tvoření plochy - - - - Supports making planar faces with holes with islands. - Podporuje vytváření rovinných ploch s dírami a ostrovy. - - - - Simple - Jednoduchý - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Vytvoří samostatnou rovinnou plochu z každého drátu. Bez podpory otvorů; dráty mohou ležet v různých rovinách. - - - - Cheese facemaker - Sýrové tvoření plochy - - - - Supports making planar faces with holes, but no islands inside holes. - Podporuje vytváření rovinných ploch s dírami, ale bez ostrovů v dírách. - - - - Part Extrude facemaker - Vysunovací tvoření plochy - - - - Supports making faces with holes, does not support nesting. - Podporuje vytváření ploch s dírami, nepodporuje vnořování. - - QObject - + Edit %1 Upravit %1 @@ -5808,20 +5765,20 @@ Chcete pokračovat? Není vybrána reference - + Face Plocha - + Edge Hrana - + Vertex Vrchol @@ -6138,7 +6095,7 @@ Chcete pokračovat? Vyčistit všechny rozměry - + Set colors... Nastavení barev... @@ -6665,7 +6622,7 @@ Vytvoří "Filtr složenin" pro každý tvar. Continuity - Pokračování + Kontinuita @@ -6930,4 +6887,64 @@ K extrakci zbývajících částí může být použitý 'Filtr složenin'.Všechny filtry výběru zrušeny + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Jednoduchý + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Vytvoří samostatnou rovinnou plochu z každého drátu. Bez podpory otvorů; dráty mohou ležet v různých rovinách. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Terčové tvoření plochy + + + + Supports making planar faces with holes with islands. + Podporuje vytváření rovinných ploch s dírami a ostrovy. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Sýrové tvoření plochy + + + + Supports making planar faces with holes, but no islands inside holes. + Podporuje vytváření rovinných ploch s dírami, ale bez ostrovů v dírách. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Vysunovací tvoření plochy + + + + Supports making faces with holes, does not support nesting. + Podporuje vytváření ploch s dírami, nepodporuje vnořování. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 53ddb2c73f..80df42e3f7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -435,13 +435,13 @@ Intersection AttachmentLine mode caption - Schnitt + Schnittstelle - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Nicht implementiert. + Intersection of two faces. @@ -4969,7 +4969,7 @@ nur die beschnittenen Objeke sichtbar Attachment Offset (in local coordinates): - Befestigungsversatz (in lokalen Koordinaten): + Versatz der Befestigung (in lokalen Koordinaten): @@ -5450,7 +5450,7 @@ indem Sie ein Auswahlrechteck in der 3D-Ansicht aufziehen Offset - Versetzen + Versatz @@ -5491,7 +5491,7 @@ indem Sie ein Auswahlrechteck in der 3D-Ansicht aufziehen Intersection - Schnittstelle + Schnitt @@ -5661,56 +5661,13 @@ für den Austragungspfad in der 3D-Ansicht auswählen. Eingabefehler - - Part_FaceMaker - - - Bull's-eye facemaker - "Bull's-eye" Flächenersteller - - - - Supports making planar faces with holes with islands. - Unterstützt das Erstellen ebener Flächen mit Löchern und Inseln. - - - - Simple - Einfach - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Erzeugt unabhängig aus jedem Kantenzug separate Ebenen-Flächen. Keine Unterstützung für Löcher; Kantenzüge können auf verschiedenen Ebenen sein. - - - - Cheese facemaker - Käse Flächenersteller - - - - Supports making planar faces with holes, but no islands inside holes. - Unterstützt das Erstellen ebener Flächen mit Löchern, jedoch keine Inseln in Löchern. - - - - Part Extrude facemaker - Bauteil-Aufdicken-Flächenersteller - - - - Supports making faces with holes, does not support nesting. - Unterstützt das Erstellen ebener Flächen mit Löchern, unterstützt keine Verschachtelungen. - - QObject - + Edit %1 %1 bearbeiten @@ -5801,20 +5758,20 @@ Do you want to continue? Keine ausgewählten Referenzen - + Face Fläche - + Edge Kante - + Vertex Knoten @@ -6131,7 +6088,7 @@ Do you want to continue? Alle Maße löschen - + Set colors... Farben festlegen... @@ -6552,7 +6509,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Attachment Offset (in local coordinates): - Versatz der Befestigung (in lokalen Koordinaten): + Befestigungsversatz (in lokalen Koordinaten): @@ -6658,7 +6615,7 @@ Es wird ein 'Compound-Filter'-Objekt für jede Form erzeugt. Continuity - Kontinuität + Stetigkeit @@ -6922,4 +6879,64 @@ Ein 'Verbundfilter' kann verwendet werden, um die restlichen Stücke zu extrahie Alle Auswahlfilter gelöscht + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Einfach + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Erzeugt unabhängig aus jedem Kantenzug separate Ebenen-Flächen. Keine Unterstützung für Löcher; Kantenzüge können auf verschiedenen Ebenen sein. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + "Bull's-eye" Flächenersteller + + + + Supports making planar faces with holes with islands. + Unterstützt das Erstellen ebener Flächen mit Löchern und Inseln. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Käse Flächenersteller + + + + Supports making planar faces with holes, but no islands inside holes. + Unterstützt das Erstellen ebener Flächen mit Löchern, jedoch keine Inseln in Löchern. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Bauteil-Aufdicken-Flächenersteller + + + + Supports making faces with holes, does not support nesting. + Unterstützt das Erstellen ebener Flächen mit Löchern, unterstützt keine Verschachtelungen. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 4fe59a63c8..a8261202ca 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Δεν έχει εφαρμοστεί. + Intersection of two faces. @@ -3870,7 +3870,7 @@ during file reading (slower but higher details). Vertex - Vertex + Κορυφή @@ -5090,7 +5090,7 @@ of object being attached. Vertex - Κορυφή + Vertex @@ -5665,56 +5665,13 @@ in the 3D view for the sweep path. Σφάλμα εισαγωγής - - Part_FaceMaker - - - Bull's-eye facemaker - Αλγόριθμος δημιουργίας όψεων Bull's-eye - - - - Supports making planar faces with holes with islands. - Υποστηρίζει τη δημιουργία επιπέδων όψεων με οπές που περιέχουν ανεξάρτητες σχεδιαστικές οντότητες. - - - - Simple - Απλό - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Δημιουργεί ξεχωριστή όψη επιπέδου από κάθε σύρμα χωρίς αλληλοεξαρτήσεις. Δεν υπάρχει υποστήριξη για οπές· τα σύρματα μπορεί να βρίσκονται σε ξεχωριστά επίπεδα. - - - - Cheese facemaker - Αλγόριθμος δημιουργίας όψεων Cheese - - - - Supports making planar faces with holes, but no islands inside holes. - Υποστηρίζει τη δημιουργία επιπέδων όψεων με οπές, αλλά χωρίς ανεξάρτητες σχεδιαστικές οντότητες εντός των οπών. - - - - Part Extrude facemaker - Αλγόριθμος δημιουργίας όψεων με τη χρήση Επέκτασης Εξαρτήματος - - - - Supports making faces with holes, does not support nesting. - Υποστηρίζει τη δημιουργία όψεων με οπές, δεν υποστηρίζει την ένθεση αντικειμένων. - - QObject - + Edit %1 Επεξεργασία %1 @@ -5807,20 +5764,20 @@ Do you want to continue? Δεν επιλέχθηκε κανένα αντικείμενο αναφοράς - + Face Όψη - + Edge Ακμή - + Vertex Vertex @@ -6137,7 +6094,7 @@ Do you want to continue? Clear all dimensions - + Set colors... Ορίστε χρώματα... @@ -6929,4 +6886,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Απλό + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Δημιουργεί ξεχωριστή όψη επιπέδου από κάθε σύρμα χωρίς αλληλοεξαρτήσεις. Δεν υπάρχει υποστήριξη για οπές· τα σύρματα μπορεί να βρίσκονται σε ξεχωριστά επίπεδα. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Αλγόριθμος δημιουργίας όψεων Bull's-eye + + + + Supports making planar faces with holes with islands. + Υποστηρίζει τη δημιουργία επιπέδων όψεων με οπές που περιέχουν ανεξάρτητες σχεδιαστικές οντότητες. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Αλγόριθμος δημιουργίας όψεων Cheese + + + + Supports making planar faces with holes, but no islands inside holes. + Υποστηρίζει τη δημιουργία επιπέδων όψεων με οπές, αλλά χωρίς ανεξάρτητες σχεδιαστικές οντότητες εντός των οπών. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Αλγόριθμος δημιουργίας όψεων με τη χρήση Επέκτασης Εξαρτήματος + + + + Supports making faces with holes, does not support nesting. + Υποστηρίζει τη δημιουργία όψεων με οπές, δεν υποστηρίζει την ένθεση αντικειμένων. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts index cfe8b7d743..983281eaa7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts @@ -440,9 +440,9 @@ Posición. Funciona en objetos con ubicaciones y aristas de elipse/parábola/hip - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - No implementado. + Intersection of two faces. @@ -5669,56 +5669,13 @@ in the 3D view for the sweep path. Error de entrada - - Part_FaceMaker - - - Bull's-eye facemaker - Ojo de Buey vía algoritmo Facemaker - - - - Supports making planar faces with holes with islands. - Admite hacer caras planas con agujeros con islas. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Hace caras planas separadas para cada alambre independientemente. No hay soporte para agujeros; los alambres pueden estar en diferentes planos. - - - - Cheese facemaker - Queso Suizo vía algoritmo Facemaker - - - - Supports making planar faces with holes, but no islands inside holes. - Admite hacer caras planas con agujeros, pero sin islas dentro de los agujeros. - - - - Part Extrude facemaker - Extrusión de Pieza vía algoritmo Facemaker - - - - Supports making faces with holes, does not support nesting. - Admite hacer caras con agujeros, no admite anidar. - - QObject - + Edit %1 Editar %1 @@ -5810,20 +5767,20 @@ Do you want to continue? Ninguna referencia seleccionada - + Face Cara - + Edge Arista - + Vertex Vértice @@ -6140,7 +6097,7 @@ Do you want to continue? Borrar todas las cotas - + Set colors... Establecer colores... @@ -6436,7 +6393,7 @@ para filtrado de colisión o distancia. Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Haga clic en 'Continuar' para crear la característica de todos modos, o 'Abortar' para cancelar. + Haga clic en 'Continuar' para crear la función de todos modos, o 'Abortar' para cancelar. @@ -6461,7 +6418,7 @@ Creará un 'Filtro Compuesto' para cada forma. Bad selection - Mala selección + Selección incorrecta @@ -6932,4 +6889,64 @@ Un 'Filtro Compuesto' se puede utilizar para extraer las piezas restantes.Todos los filtros de selección eliminados + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Hace caras planas separadas para cada alambre independientemente. No hay soporte para agujeros; los alambres pueden estar en diferentes planos. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Ojo de Buey vía algoritmo Facemaker + + + + Supports making planar faces with holes with islands. + Admite hacer caras planas con agujeros con islas. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Queso Suizo vía algoritmo Facemaker + + + + Supports making planar faces with holes, but no islands inside holes. + Admite hacer caras planas con agujeros, pero sin islas dentro de los agujeros. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Extrusión de Pieza vía algoritmo Facemaker + + + + Supports making faces with holes, does not support nesting. + Admite hacer caras con agujeros, no admite anidar. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index b02638a3b5..649cac7dce 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -440,9 +440,9 @@ Posición. Funciona en objetos con ubicaciones y bordes de elipse / parábola / - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - No implementado. + Intersection of two faces. @@ -5664,56 +5664,13 @@ in the 3D view for the sweep path. Error de entrada - - Part_FaceMaker - - - Bull's-eye facemaker - Ojo de buey fabricador de superficies - - - - Supports making planar faces with holes with islands. - Soporta hacer superficies planas con agujeros con islas. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Hace caras planas separadas para cada alambre independientemente. No hay soporte para agujeros; los alambres pueden estar en diferentes planos. - - - - Cheese facemaker - Fabricador de superficies cheese - - - - Supports making planar faces with holes, but no islands inside holes. - Ayudas haciendo caras planas con agujeros, pero sin islas dentro de los agujeros. - - - - Part Extrude facemaker - Extrusión de pieza fabricador de superficies - - - - Supports making faces with holes, does not support nesting. - Soporta hacer caras con agujeros, no soporta anidación. - - QObject - + Edit %1 Editar %1 @@ -5805,20 +5762,20 @@ Do you want to continue? Ninguna referencia seleccionada - + Face Cara - + Edge Arista - + Vertex Vértice @@ -6135,7 +6092,7 @@ Do you want to continue? Borrar todas las cotas - + Set colors... Ajustar colores... @@ -6927,4 +6884,64 @@ Un 'Filtro Compuesto' se puede utilizar para extraer las piezas restantes.Todos los filtros de selección eliminados + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Hace caras planas separadas para cada alambre independientemente. No hay soporte para agujeros; los alambres pueden estar en diferentes planos. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Ojo de buey fabricador de superficies + + + + Supports making planar faces with holes with islands. + Soporta hacer superficies planas con agujeros con islas. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Fabricador de superficies cheese + + + + Supports making planar faces with holes, but no islands inside holes. + Ayudas haciendo caras planas con agujeros, pero sin islas dentro de los agujeros. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Extrusión de pieza fabricador de superficies + + + + Supports making faces with holes, does not support nesting. + Soporta hacer caras con agujeros, no soporta anidación. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index bda7bbb897..76fde5022e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Inplementatu gabea. + Intersection of two faces. @@ -5669,56 +5669,13 @@ in the 3D view for the sweep path. Sarrera-errorea - - Part_FaceMaker - - - Bull's-eye facemaker - Idi-begien aurpegi-sortzailea - - - - Supports making planar faces with holes with islands. - Zuloak eta haien barruko uharteak dituzten aurpegi planarrak onartzen ditu. - - - - Simple - Sinplea - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Plano-aurpegi independente bana egiten du alanbre bakoitzerako. Ez dira zuloak onartzen; alanbreak plano desberdinetan egon daitezke. - - - - Cheese facemaker - Gazten aurpegi-sortzailea - - - - Supports making planar faces with holes, but no islands inside holes. - Zuloak dituzten aurpegi planarrak onartzen ditu, baina ez ditu onartzen zuloen barruko uharteak. - - - - Part Extrude facemaker - Pieza-estrusioen aurpegi-sortzailea - - - - Supports making faces with holes, does not support nesting. - Zuloak dituzten aurpegiak sortzea onartzen du, ez du onartzen habiaratzea. - - QObject - + Edit %1 Editatu %1 @@ -5809,20 +5766,20 @@ Do you want to continue? Ez da erreferentziarik hautatu - + Face Aurpegia - + Edge Ertza - + Vertex Erpina @@ -6139,7 +6096,7 @@ Do you want to continue? Garbitu kota guztiak - + Set colors... Ezarri koloreak... @@ -6930,4 +6887,64 @@ Horrek esan nahi du gainjarrita dauden formen bolumenak kendu egingo direla. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Sinplea + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Plano-aurpegi independente bana egiten du alanbre bakoitzerako. Ez dira zuloak onartzen; alanbreak plano desberdinetan egon daitezke. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Idi-begien aurpegi-sortzailea + + + + Supports making planar faces with holes with islands. + Zuloak eta haien barruko uharteak dituzten aurpegi planarrak onartzen ditu. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Gazten aurpegi-sortzailea + + + + Supports making planar faces with holes, but no islands inside holes. + Zuloak dituzten aurpegi planarrak onartzen ditu, baina ez ditu onartzen zuloen barruko uharteak. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Pieza-estrusioen aurpegi-sortzailea + + + + Supports making faces with holes, does not support nesting. + Zuloak dituzten aurpegiak sortzea onartzen du, ez du onartzen habiaratzea. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 42daf0cbfb..c8cabc5d34 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Ei toteutettu. + Intersection of two faces. @@ -5673,56 +5673,13 @@ reuna tai lanka, jota pitkin reitin pyyhkäisy tehdään. Syötteen virhe - - Part_FaceMaker - - - Bull's-eye facemaker - Napakymppi-pintatahkontekijä - - - - Supports making planar faces with holes with islands. - Tukee sellaisten tasomaisten pintatahkojen tekemistä, missä on reikiä ja niiden saarekkeita. - - - - Simple - Yksinkertainen - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Tekee tasomaisen pintatahkon jokaisesta langasta erikseen. Ei tukea rei'ille; langat voivat olla eri tasoilla. - - - - Cheese facemaker - Rei'itys-pintatahkontekijä - - - - Supports making planar faces with holes, but no islands inside holes. - Tukee sellaisten tasomaisten pintatahkojen tekemistä, missä on reikiä, mutta ei niiden saarekkeita. - - - - Part Extrude facemaker - Osanpursotus-pintatahkontekijä - - - - Supports making faces with holes, does not support nesting. - Tukee reiällisten pintatahkojen tekemistä, ei tue verkoittumista (nesting). - - QObject - + Edit %1 Muokkaa %1 @@ -5814,20 +5771,20 @@ Haluatko jatkaa? Ei viittausta valittuna - + Face Tahko - + Edge Reuna - + Vertex Kärkipiste @@ -6144,7 +6101,7 @@ Haluatko jatkaa? Clear all dimensions - + Set colors... Määritä värit ... @@ -6936,4 +6893,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Yksinkertainen + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Tekee tasomaisen pintatahkon jokaisesta langasta erikseen. Ei tukea rei'ille; langat voivat olla eri tasoilla. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Napakymppi-pintatahkontekijä + + + + Supports making planar faces with holes with islands. + Tukee sellaisten tasomaisten pintatahkojen tekemistä, missä on reikiä ja niiden saarekkeita. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Rei'itys-pintatahkontekijä + + + + Supports making planar faces with holes, but no islands inside holes. + Tukee sellaisten tasomaisten pintatahkojen tekemistä, missä on reikiä, mutta ei niiden saarekkeita. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Osanpursotus-pintatahkontekijä + + + + Supports making faces with holes, does not support nesting. + Tukee reiällisten pintatahkojen tekemistä, ei tue verkoittumista (nesting). + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 404cbb3469..185b25bb80 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Non implémenté. + Intersection of two faces. @@ -1167,7 +1167,7 @@ Part - Part + Pièce @@ -2205,7 +2205,7 @@ La vue caméra détermine la direction de la projection. Part - Pièce + Part @@ -2339,7 +2339,7 @@ La vue caméra détermine la direction de la projection. Wire - Fil + Polyligne @@ -2790,7 +2790,7 @@ la taille du fichier STEP résultant. If checked, direction of extrusion is reversed. - Si coché, la direction d’extrusion est inversée. + Si cette option est cochée, la direction d’extrusion est inversée. @@ -2893,7 +2893,7 @@ Si les deux longueurs sont nulles, la grandeur de la direction est utilisée. If checked, extruding closed wires will give solids, not shells. - Si coché, l'extrusion de contours fermés produira des solides, non des coques. + Si cette option est cochée, l'extrusion de contours fermés produira des solides, non des coques. @@ -3063,7 +3063,7 @@ Si les deux longueurs sont nulles, la grandeur de la direction est utilisée. Length: - Longueur : + Longueur : @@ -3271,13 +3271,13 @@ Please check one or more edge entities first. Import - Importer + Importation If checked, no Compound merge will be done during file reading (slower but higher details). - Si cette case est cochée, aucune fusion composée ne sera effectuée pendant la lecture du fichier (plus lent mais plus détaillé). + Si cette option est cochée, aucune fusion composée ne sera effectuée pendant la lecture du fichier (plus lent mais plus détaillé). @@ -3381,7 +3381,7 @@ during file reading (slower but higher details). Position: - Position : + Position : @@ -3434,7 +3434,7 @@ during file reading (slower but higher details). Position: - Position : + Position : @@ -3464,12 +3464,12 @@ during file reading (slower but higher details). Radius: - Rayon : + Rayon : Height: - Hauteur : + Hauteur : @@ -3629,13 +3629,13 @@ during file reading (slower but higher details). Parameter - Paramètre + Paramètres Length: - Longueur : + Longueur : @@ -3659,7 +3659,7 @@ during file reading (slower but higher details). Radius: - Rayon : + Rayon : @@ -3948,17 +3948,17 @@ during file reading (slower but higher details). X: - X : + X : Y: - Y : + Y : Z: - Z : + Z : @@ -4038,12 +4038,12 @@ during file reading (slower but higher details). Angle: - Angle : + Angle : If checked, revolution will extend forwards and backwards by half the angle. - Si coché, la révolution s’étendra de part et d'autre de la moitié de l’angle. + Si cette option est cochée, la révolution s’étendra de part et d'autre de la moitié de l’angle. @@ -4053,7 +4053,7 @@ during file reading (slower but higher details). If checked, revolving wires will produce solids. If not, revolving a wire yields a shell. - Si coché, la rotation des fils produira des solides. Sinon, la rotation d'un fil produit une coque. + Si cette option est cochée, la rotation des polylignes produira des solides. Dans le cas contraire, la rotation d'une polyligne produira une coque. @@ -4367,8 +4367,8 @@ If not checked, it depends on the option "Backlight color" will be used or black. La face inférieure d'une surface recevra le même rendu que la face supérieure. Si cette option n'est pas cochée, elle dépend de l'option "Couleur du rétroéclairage" -(préférences section Affichage → Vue 3D). Soit la couleur du rétroéclairage -sera utilisée, soit ce sera noir. +(préférences section Affichage → Vue 3D). +La couleur du rétroéclairage sera utilisée ou bien ce sera noir. @@ -4679,8 +4679,8 @@ le vecteur normal du plan de l'esquisse sera utilisé will be taken from the cut objects. Works only properly if all objects have the same values. - Si coché, la couleur et la transparence -seront identiques à celles des objets coupés. + Si cette option est cochée, la couleur et la transparence seront +identiques à celles des objets coupés. Fonctionne uniquement si tous les objets ont les mêmes valeurs. @@ -4768,7 +4768,7 @@ seules les coupes créées seront visibles Wrong selection - Sélection incorrecte + Sélection invalide @@ -4881,7 +4881,7 @@ seules les coupes créées seront visibles Wrong selection - Sélection invalide + Sélection incorrecte @@ -5176,7 +5176,8 @@ Valeur par défaut : false Log errors to report view. Default: true - Les logs d'erreurs vers la Vue rapport. Par défaut : true + Les logs d'erreurs vers la Vue rapport. +Valeur par défaut : true @@ -5284,13 +5285,13 @@ Valeur par défaut : true Check for continuity. Default: true Vérifier la continuité. -Par défaut : true +Valeur par défaut : true Check for incompatible faces. Default: true Vérifier la présence de faces incompatibles. -Par défaut : true +Valeur par défaut : true @@ -5438,7 +5439,7 @@ faces en traçant un rectangle de sélection dans la vue 3D. Create solid - Créer le solide + Créer un solide @@ -5457,7 +5458,7 @@ faces en traçant un rectangle de sélection dans la vue 3D. Offset - Décaler + Décalage @@ -5513,12 +5514,12 @@ faces en traçant un rectangle de sélection dans la vue 3D. Faces - Faces + Faces  Update view - Mise à jour de la vue + Mettre à jour la vue @@ -5600,7 +5601,7 @@ faces en traçant un rectangle de sélection dans la vue 3D. Create solid - Créer un solide + Créer le solide @@ -5624,7 +5625,7 @@ in the 3D view for the sweep path. Parameter - Paramètres + Paramètre @@ -5639,7 +5640,7 @@ in the 3D view for the sweep path. Height: - Hauteur : + Hauteur : @@ -5667,56 +5668,13 @@ in the 3D view for the sweep path. Erreur de saisie - - Part_FaceMaker - - - Bull's-eye facemaker - Générateur de faces cible - - - - Supports making planar faces with holes with islands. - Supporte la création de faces planaires avec des îlots. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Construit des faces planes séparées à partir de chaque polyligne indépendamment. Les trous ne sont pas pris en charge. Les polylignes peuvent être sur différents plans. - - - - Cheese facemaker - Générateur de faces avec des trous - - - - Supports making planar faces with holes, but no islands inside holes. - Permet la création de faces planes avec des trous mais pas d'îlots à l'intérieur des trous. - - - - Part Extrude facemaker - Générateur de faces avec des trous par extrusion - - - - Supports making faces with holes, does not support nesting. - Permet de créer des faces avec des trous mais pas d'imbrication. - - QObject - + Edit %1 Éditer %1 @@ -5808,27 +5766,27 @@ Voulez-vous continuer ? Aucune référence sélectionnée - + Face Face - + Edge Arête - + Vertex Sommet Compound - Composé + Composés @@ -5848,7 +5806,7 @@ Voulez-vous continuer ? Wire - Polyligne + Fil @@ -6138,7 +6096,7 @@ Voulez-vous continuer ? Effacer toutes les dimensions - + Set colors... Définir les couleurs... @@ -6243,7 +6201,7 @@ Voulez-vous continuer ? Compound - Composés + Composé @@ -6253,7 +6211,7 @@ Voulez-vous continuer ? Measure - Mesures + Mesure @@ -6603,7 +6561,7 @@ Cela créera un "filtre composé" pour chaque forme. Faces - Faces  + Faces @@ -6925,4 +6883,64 @@ Un "filtre composé" peut être utilisé pour extraire les morceaux restants.Tous les filtres de sélection ont été effacés + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Construit des faces planes séparées à partir de chaque polyligne indépendamment. Les trous ne sont pas pris en charge. Les polylignes peuvent être sur différents plans. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Générateur de faces cible + + + + Supports making planar faces with holes with islands. + Supporte la création de faces planaires avec des îlots. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Générateur de faces avec des trous + + + + Supports making planar faces with holes, but no islands inside holes. + Permet la création de faces planes avec des trous mais pas d'îlots à l'intérieur des trous. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Générateur de faces avec des trous par extrusion + + + + Supports making faces with holes, does not support nesting. + Permet de créer des faces avec des trous mais pas d'imbrication. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 95c23ccf2b..067bcad3cc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Non aplicado. + Intersection of two faces. @@ -5664,56 +5664,13 @@ in the 3D view for the sweep path. Input error - - Part_FaceMaker - - - Bull's-eye facemaker - Facemaker Ollo de boi - - - - Supports making planar faces with holes with islands. - Soporta facer faces planas con buratos con illas. - - - - Simple - Sinxelo - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Fai face chaira separada Independentemente de cada arame. Non hai soporte para buratos; os arames poden estar en diferentes planos. - - - - Cheese facemaker - Facemaker queixo - - - - Supports making planar faces with holes, but no islands inside holes. - Soporta facer faces planas con buratos, pero non con illas nos buratos. - - - - Part Extrude facemaker - Facemaker extrusión de peza - - - - Supports making faces with holes, does not support nesting. - Soporta facer faces con buratos, non soporta o aniñado. - - QObject - + Edit %1 Editar %1 @@ -5804,20 +5761,20 @@ Do you want to continue? Ningunha referencia escolmada - + Face Face - + Edge Bordo - + Vertex Vertex @@ -6134,7 +6091,7 @@ Do you want to continue? Borrar todas as dimensións - + Set colors... Definir cores... @@ -6926,4 +6883,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Sinxelo + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Fai face chaira separada Independentemente de cada arame. Non hai soporte para buratos; os arames poden estar en diferentes planos. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Facemaker Ollo de boi + + + + Supports making planar faces with holes with islands. + Soporta facer faces planas con buratos con illas. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Facemaker queixo + + + + Supports making planar faces with holes, but no islands inside holes. + Soporta facer faces planas con buratos, pero non con illas nos buratos. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Facemaker extrusión de peza + + + + Supports making faces with holes, does not support nesting. + Soporta facer faces con buratos, non soporta o aniñado. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 4a2e77c722..6bfcfcae70 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Nije ugrađeno. + Intersection of two faces. @@ -5691,56 +5691,13 @@ u 3D pogledu kao putanju za zamah. Pogreška na ulazu - - Part_FaceMaker - - - Bull's-eye facemaker - "Bull's-eye" dotjerivanje izgleda - - - - Supports making planar faces with holes with islands. - Podržava stvaranje ravani lica s rupama i otocima. - - - - Simple - Jednostavno - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Napravi posebnu ravninu lica od svake žice samostalno. Nema podršku za rupe; žice mogu biti na različitim ravninama. - - - - Cheese facemaker - Sir, dotjerivanje izgleda - - - - Supports making planar faces with holes, but no islands inside holes. - Podržava stvaranje ravani lica s rupama i otocima, ali nema otoka unutar rupe. - - - - Part Extrude facemaker - Dio istisnuti, dotjerivanje izgleda - - - - Supports making faces with holes, does not support nesting. - Podržava stvaranje lica s rupama, ne podržava gniježđenje. - - QObject - + Edit %1 Uređivanje %1 @@ -5831,20 +5788,20 @@ Do you want to continue? Referenca još nije postavljena - + Face Površina - + Edge Rub - + Vertex Vrh @@ -6161,7 +6118,7 @@ Do you want to continue? Obrišite sve dimenzije - + Set colors... Postavljanje boje ... @@ -6976,4 +6933,64 @@ Skalira odabrani oblik Obrisani svi filteri odabira + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Jednostavno + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Napravi posebnu ravninu lica od svake žice samostalno. Nema podršku za rupe; žice mogu biti na različitim ravninama. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + "Bull's-eye" dotjerivanje izgleda + + + + Supports making planar faces with holes with islands. + Podržava stvaranje ravani lica s rupama i otocima. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Sir, dotjerivanje izgleda + + + + Supports making planar faces with holes, but no islands inside holes. + Podržava stvaranje ravani lica s rupama i otocima, ali nema otoka unutar rupe. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Dio istisnuti, dotjerivanje izgleda + + + + Supports making faces with holes, does not support nesting. + Podržava stvaranje lica s rupama, ne podržava gniježđenje. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index e7b6ca8a92..089e85ef58 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Nem beágyazott. + Intersection of two faces. @@ -4048,7 +4048,7 @@ a fájl olvasása közben (lassabb, de pontosabb). Angle: - Szög: + Dőlésszög: @@ -5667,56 +5667,13 @@ in the 3D view for the sweep path. Bemeneti hiba - - Part_FaceMaker - - - Bull's-eye facemaker - Céltábla közepe felületlétrehozás - - - - Supports making planar faces with holes with islands. - Támogatja a lyukkal rendelkező szigetek síkbeli felületeinek létrehozását. - - - - Simple - Egyszerű - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Külön sík felület létrehozása minden dróthálóhoz függetlenül. Nincs lyuk támogatás; drótok lehetnek különböző síkokon. - - - - Cheese facemaker - Sajtfelület létrehozás - - - - Supports making planar faces with holes, but no islands inside holes. - Támogatja a síkbeli felületek létrehozását, de nem a lyukkal rendelkező szigeteket. - - - - Part Extrude facemaker - Tárgy kihúzás felületlétrehozás - - - - Supports making faces with holes, does not support nesting. - Lyukas felületek létrehozásának támogatása, nem támogatja a hálósítást. - - QObject - + Edit %1 %1 szerkesztése @@ -5807,20 +5764,20 @@ Do you want to continue? Nincs kijelölt hivatkozás - + Face Felület - + Edge Él - + Vertex Végpont @@ -6137,7 +6094,7 @@ Do you want to continue? Összes méret eltávolítása - + Set colors... Színek beállítása... @@ -6927,4 +6884,64 @@ A fennmaradó darabok kivonására az 'összetevő szűrő' használható.Összes kiválasztási szűrő törölve + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Egyszerű + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Külön sík felület létrehozása minden dróthálóhoz függetlenül. Nincs lyuk támogatás; drótok lehetnek különböző síkokon. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Céltábla közepe felületlétrehozás + + + + Supports making planar faces with holes with islands. + Támogatja a lyukkal rendelkező szigetek síkbeli felületeinek létrehozását. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Sajtfelület létrehozás + + + + Supports making planar faces with holes, but no islands inside holes. + Támogatja a síkbeli felületek létrehozását, de nem a lyukkal rendelkező szigeteket. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Tárgy kihúzás felületlétrehozás + + + + Supports making faces with holes, does not support nesting. + Lyukas felületek létrehozásának támogatása, nem támogatja a hálósítást. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index b190a1658b..a571efdaba 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Tidak dilaksanakan. + Intersection of two faces. @@ -5781,56 +5781,13 @@ di 3D pandangan untuk menyapu jalan. Input error - - Part_FaceMaker - - - Bull's-eye facemaker - Pembuat bentuk mata Bull - - - - Supports making planar faces with holes with islands. - Mendukung pembuatan wajah planar dengan lubang dengan pulau. - - - - Simple - Sederhana - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Membuat terpisah Pesawat wajah dari setiap kawat secara independen. Tidak ada dukungan untuk lubang; kabel bisa di pesawat yang berbeda. - - - - Cheese facemaker - Pembuat wajah keju - - - - Supports making planar faces with holes, but no islands inside holes. - Mendukung pembuatan wajah planar dengan lubang, tapi tidak ada pulau di dalam lubang. - - - - Part Extrude facemaker - Bagian Extrude facemaker - - - - Supports making faces with holes, does not support nesting. - Mendukung pembuatan wajah dengan lubang, tidak mendukung bersarang. - - QObject - + Edit %1 Edit %1 @@ -5921,20 +5878,20 @@ Do you want to continue? Tidak ada referensi yang dipilih - + Face Menghadapi - + Edge Tepi - + Vertex Vertex @@ -6251,7 +6208,7 @@ Do you want to continue? Clear all dimensions - + Set colors... Tetapkan warna... @@ -7043,4 +7000,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Sederhana + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Membuat terpisah Pesawat wajah dari setiap kawat secara independen. Tidak ada dukungan untuk lubang; kabel bisa di pesawat yang berbeda. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Pembuat bentuk mata Bull + + + + Supports making planar faces with holes with islands. + Mendukung pembuatan wajah planar dengan lubang dengan pulau. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Pembuat wajah keju + + + + Supports making planar faces with holes, but no islands inside holes. + Mendukung pembuatan wajah planar dengan lubang, tapi tidak ada pulau di dalam lubang. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Bagian Extrude facemaker + + + + Supports making faces with holes, does not support nesting. + Mendukung pembuatan wajah dengan lubang, tidak mendukung bersarang. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 4c9e9b6b40..3dfa279cfd 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -435,13 +435,13 @@ Intersection AttachmentLine mode caption - Intersezione + Interseca - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Non implementato. + Intersection of two faces. @@ -1494,12 +1494,12 @@ nei suoi componenti X, Y e Z. Join objects... - Congiungi gli oggetti... + Congiungi oggetti... Join walled objects - Congiungi oggetti cavi + Congiungi oggetti con pareti @@ -1609,7 +1609,7 @@ nei suoi componenti X, Y e Z. Make a cut of two shapes - Esegue un taglio di due forme + Esegue una sottrazione di due forme @@ -2344,7 +2344,7 @@ della proiezione. Wire - Filo + Polilinea @@ -5667,56 +5667,13 @@ in the 3D view for the sweep path. Errore di input - - Part_FaceMaker - - - Bull's-eye facemaker - Crea facce tipo occhio di bue - - - - Supports making planar faces with holes with islands. - Supporta la creazione di facce planari con fori e con isole. - - - - Simple - Semplice - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Crea facce piane separate da ogni polilinea in modo indipendente. Nessun supporto per i fori; le polilinee possono essere su piani diversi. - - - - Cheese facemaker - Crea facce tipo formaggio - - - - Supports making planar faces with holes, but no islands inside holes. - Supporta la creazione di facce planari con fori, ma senza isole all'interno dei fori. - - - - Part Extrude facemaker - Part estrudi facce - - - - Supports making faces with holes, does not support nesting. - Supporta la creazione di facce con fori, non supporta la nidificazione. - - QObject - + Edit %1 Edita %1 @@ -5807,20 +5764,20 @@ Do you want to continue? Nessun riferimento selezionato - + Face Faccia - + Edge Bordo - + Vertex Vertice @@ -5847,7 +5804,7 @@ Do you want to continue? Wire - Polilinea + Filo @@ -6137,7 +6094,7 @@ Do you want to continue? Cancella tutte le quotature - + Set colors... Imposta i colori... @@ -6232,7 +6189,7 @@ Do you want to continue? Join - Congiungi + Giunzione @@ -6314,7 +6271,7 @@ Do you want to continue? Connect objects - Collega oggetti + Congiunge oggetti @@ -6340,7 +6297,7 @@ Do you want to continue? Cutout for object - Ritaglia per l'oggetto + Ritaglio per l'oggetto @@ -6929,4 +6886,64 @@ Un 'Composto Filtro' può essere usato per estrarre i pezzi rimanenti.Tutti i filtri di selezione cancellati + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Semplice + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Crea facce piane separate da ogni polilinea in modo indipendente. Nessun supporto per i fori; le polilinee possono essere su piani diversi. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Crea facce tipo occhio di bue + + + + Supports making planar faces with holes with islands. + Supporta la creazione di facce planari con fori e con isole. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Crea facce tipo formaggio + + + + Supports making planar faces with holes, but no islands inside holes. + Supporta la creazione di facce planari con fori, ma senza isole all'interno dei fori. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Part estrudi facce + + + + Supports making faces with holes, does not support nesting. + Supporta la creazione di facce con fori, non supporta la nidificazione. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index f7a0494e1d..08a9337619 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - 実装されていません。 + Intersection of two faces. @@ -5653,56 +5653,13 @@ in the 3D view for the sweep path. 入力エラー - - Part_FaceMaker - - - Bull's-eye facemaker - ブルズ・アイ・フェイスメーカー - - - - Supports making planar faces with holes with islands. - 穴、穴の内側に浮かぶ島状の形状のある平面の作成がサポートされます。 - - - - Simple - シンプル - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - 各ワイヤーごとに独立に分かれた平面フェイスを作成。ホールはサポートされていません。またワイヤーは異なる平面上に存在できます。 - - - - Cheese facemaker - チーズ・フェイスメーカー - - - - Supports making planar faces with holes, but no islands inside holes. - 穴のある平面の作成はサポートしますが、穴の内側に浮かぶ島のようなものは出来ません。 - - - - Part Extrude facemaker - パーツ押し出しフェイスメーカー - - - - Supports making faces with holes, does not support nesting. - サポートされている穴を作成する面では、入れ子をサポートしていません。 - - QObject - + Edit %1 %1を編集 @@ -5793,20 +5750,20 @@ Do you want to continue? 参照が選択されていません。 - + Face 面 - + Edge エッジ - + Vertex 頂点 @@ -6123,7 +6080,7 @@ Do you want to continue? すべての寸法をクリア - + Set colors... 色を設定... @@ -6910,4 +6867,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + シンプル + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + 各ワイヤーごとに独立に分かれた平面フェイスを作成。ホールはサポートされていません。またワイヤーは異なる平面上に存在できます。 + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + ブルズ・アイ・フェイスメーカー + + + + Supports making planar faces with holes with islands. + 穴、穴の内側に浮かぶ島状の形状のある平面の作成がサポートされます。 + + + + Part::FaceMakerCheese + + + Cheese facemaker + チーズ・フェイスメーカー + + + + Supports making planar faces with holes, but no islands inside holes. + 穴のある平面の作成はサポートしますが、穴の内側に浮かぶ島のようなものは出来ません。 + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + パーツ押し出しフェイスメーカー + + + + Supports making faces with holes, does not support nesting. + サポートされている穴を作成する面では、入れ子をサポートしていません。 + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts index 6c54797d9e..faf3479853 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + წვერო @@ -265,7 +265,7 @@ Deactivated AttachmentLine mode caption - გამორთული + დეაქტივირებულია @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - განხორციელებული არაა. + Intersection of two faces. @@ -707,7 +707,7 @@ Deactivated Attachment3D mode caption - დეაქტივირებულია + გამორთული @@ -2196,7 +2196,7 @@ of projection. Torus - ტორი + ტორუსი @@ -2308,7 +2308,7 @@ of projection. Refine shape - მოხაზულობის გამკვეთრება + მოხაზულობის დაზუსტება @@ -2359,7 +2359,7 @@ of projection. Solid - მყარი სხეული + მყარი @@ -2992,7 +2992,7 @@ If both lengths are zero, magnitude of direction is used. Shape - ფიგურა + მოხაზულობა @@ -3068,7 +3068,7 @@ If both lengths are zero, magnitude of direction is used. Length: - Length: + სიგრძე: @@ -3579,7 +3579,7 @@ during file reading (slower but higher details). Torus - ტორუსი + ტორი @@ -3643,7 +3643,7 @@ during file reading (slower but higher details). Length: - სიგრძე: + Length: @@ -4777,7 +4777,7 @@ only created cuts will be visible Wrong selection - არასწორი მონიშნული + არასწორი არჩევანი @@ -4890,7 +4890,7 @@ only created cuts will be visible Wrong selection - არასწორი არჩევანი + არასწორი მონიშნული @@ -5094,7 +5094,7 @@ of object being attached. Selecting... - მონიშვნა... + არჩევა... @@ -5421,7 +5421,7 @@ by dragging a selection rectangle in the 3D view Box selection - არეალის მონიშვნა + ყუთის არჩევანი @@ -5509,7 +5509,7 @@ by dragging a selection rectangle in the 3D view Faces - სიბრტყეები + ზედაპირები @@ -5563,7 +5563,7 @@ by dragging a selection rectangle in the 3D view Refine shape - მოხაზულობის დაზუსტება + მოხაზულობის გამკვეთრება @@ -5661,50 +5661,7 @@ in the 3D view for the sweep path. Input error - შეყვანის შეცდომა - - - - Part_FaceMaker - - - Bull's-eye facemaker - Bull's-eye facemaker - - - - Supports making planar faces with holes with islands. - გააჩნია კუნძულიანი ხვრელების მქონე ბრტყელი ზედაპირების შექმნის შესაძლებლობა. - - - - Simple - მარტივი - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - თითოეული პოლიხაზისგან სიბრტყის ზედაპირის ცალცალკე შექმნა. არ გააჩნია ხვრელების მხარდაჭერა. პოლიხაზები შეიძლება სხვადასხვა სიბრტყეებზე იყოს. - - - - Cheese facemaker - ყველისებრი ზედაპირთმკეთი - - - - Supports making planar faces with holes, but no islands inside holes. - გააჩნია უკუნძულო ხვრელების მქონე ბრტყელი ზედაპირების შექმნის შესაძლებლობა. - - - - Part Extrude facemaker - ნაწილის გამოწნეხვის ზედაპირი - - - - Supports making faces with holes, does not support nesting. - შეუძლია ნახვრეტებიანი სიბრტყეების შექმნა. არ გააჩნია ნესტინგის მხარდაჭერა. + Input error @@ -5712,8 +5669,8 @@ in the 3D view for the sweep path. - + Edit %1 %1-ის ჩასწორება @@ -5805,22 +5762,22 @@ Do you want to continue? მიბმა არჩეული არაა - + Face - ზედაპირი + სიბრტყე - + Edge წიბო - + Vertex - წვერო + Vertex @@ -5835,7 +5792,7 @@ Do you want to continue? Solid - მყარი + მყარი სხეული @@ -5850,7 +5807,7 @@ Do you want to continue? Shape - მოხაზულობა + ფიგურა @@ -6135,7 +6092,7 @@ Do you want to continue? ყველა ზომის გასუფთავება - + Set colors... ფერების დაყენება... @@ -6210,7 +6167,7 @@ Do you want to continue? Solids - მასივები + მყარი სხეულები @@ -6250,7 +6207,7 @@ Do you want to continue? Measure - გაზომვა + საზომი @@ -6531,7 +6488,7 @@ It will create a 'Compound Filter' for each shape. Selecting... - არჩევა... + მონიშვნა... @@ -6602,7 +6559,7 @@ It will create a 'Compound Filter' for each shape. Faces - ზედაპირები + სიბრტყეები @@ -6612,7 +6569,7 @@ It will create a 'Compound Filter' for each shape. Solids - მყარი სხეულები + მასივები @@ -6662,7 +6619,7 @@ It will create a 'Compound Filter' for each shape. Continuity - გაგრძელება + უწყვეტობა @@ -6927,4 +6884,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. ყველა მონიშნულის ფილტრი გასუფთავდა + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + მარტივი + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + თითოეული პოლიხაზისგან სიბრტყის ზედაპირის ცალცალკე შექმნა. არ გააჩნია ხვრელების მხარდაჭერა. პოლიხაზები შეიძლება სხვადასხვა სიბრტყეებზე იყოს. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Bull's-eye facemaker + + + + Supports making planar faces with holes with islands. + გააჩნია კუნძულიანი ხვრელების მქონე ბრტყელი ზედაპირების შექმნის შესაძლებლობა. + + + + Part::FaceMakerCheese + + + Cheese facemaker + ყველისებრი ზედაპირთმკეთი + + + + Supports making planar faces with holes, but no islands inside holes. + გააჩნია უკუნძულო ხვრელების მქონე ბრტყელი ზედაპირების შექმნის შესაძლებლობა. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + ნაწილის გამოწნეხვის ზედაპირი + + + + Supports making faces with holes, does not support nesting. + შეუძლია ნახვრეტებიანი სიბრტყეების შექმნა. არ გააჩნია ნესტინგის მხარდაჭერა. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index 40bf5b63fc..b75c3b8636 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Not implemented. + Intersection of two faces. @@ -5670,56 +5670,13 @@ in the 3D view for the sweep path. 입력 오류 - - Part_FaceMaker - - - Bull's-eye facemaker - Bull's-eye facemaker - - - - Supports making planar faces with holes with islands. - Supports making planar faces with holes with islands. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - - - - Cheese facemaker - Cheese facemaker - - - - Supports making planar faces with holes, but no islands inside holes. - Supports making planar faces with holes, but no islands inside holes. - - - - Part Extrude facemaker - Part Extrude facemaker - - - - Supports making faces with holes, does not support nesting. - Supports making faces with holes, does not support nesting. - - QObject - + Edit %1 Edit %1 @@ -5810,20 +5767,20 @@ Do you want to continue? No reference selected - + Face 면 선택 - + Edge 모서리 - + Vertex Vertex @@ -6140,7 +6097,7 @@ Do you want to continue? Clear all dimensions - + Set colors... 색 설정... @@ -6932,4 +6889,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Bull's-eye facemaker + + + + Supports making planar faces with holes with islands. + Supports making planar faces with holes with islands. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Cheese facemaker + + + + Supports making planar faces with holes, but no islands inside holes. + Supports making planar faces with holes, but no islands inside holes. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Part Extrude facemaker + + + + Supports making faces with holes, does not support nesting. + Supports making faces with holes, does not support nesting. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 83b4f56767..69006daf7d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Niet geïmplementeerd. + Intersection of two faces. @@ -5672,56 +5672,13 @@ in de 3D-weergave voor het veegpad. Invoerfout - - Part_FaceMaker - - - Bull's-eye facemaker - Bull's-eye vlakkengenerator - - - - Supports making planar faces with holes with islands. - Ondersteunt het maken van planaire vlakken met gaten met eilanden. - - - - Simple - Eenvoudig - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Maakt een afzonderlijk planair vlak vanuit elke draad. Geen ondersteuning voor gaten; de draden kunnen zich op verschillende vlakken bevinden. - - - - Cheese facemaker - Cheese vlakkengenerator - - - - Supports making planar faces with holes, but no islands inside holes. - Ondersteunt het maken van planaire vlakken met gaten, maar zonder eilanden binnen de gaten. - - - - Part Extrude facemaker - Vlakkengenerator voor geëxtrudeerde onderdelen - - - - Supports making faces with holes, does not support nesting. - Ondersteunt het maken van vlakken met gaten, ondersteunt nestingen niet. - - QObject - + Edit %1 Bewerken %1 @@ -5813,20 +5770,20 @@ Wilt u doorgaan? Geen referentie geselecteerd - + Face Vlak - + Edge Rand - + Vertex Vertex @@ -6143,7 +6100,7 @@ Wilt u doorgaan? Clear all dimensions - + Set colors... Kleuren instellen... @@ -6935,4 +6892,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Eenvoudig + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Maakt een afzonderlijk planair vlak vanuit elke draad. Geen ondersteuning voor gaten; de draden kunnen zich op verschillende vlakken bevinden. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Bull's-eye vlakkengenerator + + + + Supports making planar faces with holes with islands. + Ondersteunt het maken van planaire vlakken met gaten met eilanden. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Cheese vlakkengenerator + + + + Supports making planar faces with holes, but no islands inside holes. + Ondersteunt het maken van planaire vlakken met gaten, maar zonder eilanden binnen de gaten. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Vlakkengenerator voor geëxtrudeerde onderdelen + + + + Supports making faces with holes, does not support nesting. + Ondersteunt het maken van vlakken met gaten, ondersteunt nestingen niet. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 27a1959314..c8ae3f721e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Nie wprowadzono. + Intersection of two faces. @@ -2253,7 +2253,7 @@ Ujęcie widoku określa kierunek rzutowania. Section - Przekrój + Przecięcie @@ -2556,7 +2556,7 @@ Uwaga: Położenie jest wyrażone w przestrzeni lokalnej dołączanego obiektu.< Section - Przecięcie + Przekrój @@ -4780,7 +4780,7 @@ only created cuts will be visible Wrong selection - Nieprawidłowy wybór + Niewłaściwy wybór @@ -4893,7 +4893,7 @@ only created cuts will be visible Wrong selection - Niewłaściwy wybór + Nieprawidłowy wybór @@ -5671,58 +5671,13 @@ in the 3D view for the sweep path. Błąd danych wejściowych - - Part_FaceMaker - - - Bull's-eye facemaker - Kreator ścian dookólnych - - - - Supports making planar faces with holes with islands. - Umożliwia tworzenie ścian planarnych z wyspami w otworach. - - - - Simple - Proste - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Tworzy osobną płaszczyznę ściany z każdej polilinii oddzielnie. -Bez wsparcia dla otworów. -Polilinie mogą znajdować się na różnych płaszczyznach. - - - - Cheese facemaker - Kreator ścian perforowanych - - - - Supports making planar faces with holes, but no islands inside holes. - Umożliwia tworzenie planarnych ścian z otworami, ale bez wysp w otworach. - - - - Part Extrude facemaker - Wyciągnięcie Części z twórcy ścian - - - - Supports making faces with holes, does not support nesting. - Umożliwia stworzenie ścian z otworami, nie umożliwia zagnieżdżania. - - QObject - + Edit %1 Edytuj %1 @@ -5813,27 +5768,27 @@ Do you want to continue? Nie wybrano odniesienia - + Face - Ściana + Powierzchnia - + Edge Krawędź - + Vertex Wierzchołek Compound - Kształt złożony + Złożenie @@ -6143,7 +6098,7 @@ Do you want to continue? Usuń wszystkie wymiary - + Set colors... Ustaw kolory ... @@ -6248,7 +6203,7 @@ Do you want to continue? Compound - Złożenie + Kształt złożony @@ -6937,4 +6892,66 @@ Oznacza to, że nakładające się na siebie objętości kształtów zostaną us Wszystkie filtry wyboru wyczyszczone + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Proste + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Tworzy osobną płaszczyznę ściany z każdej polilinii oddzielnie. +Bez wsparcia dla otworów. +Polilinie mogą znajdować się na różnych płaszczyznach. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Kreator ścian dookólnych + + + + Supports making planar faces with holes with islands. + Umożliwia tworzenie ścian planarnych z wyspami w otworach. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Kreator ścian perforowanych + + + + Supports making planar faces with holes, but no islands inside holes. + Umożliwia tworzenie planarnych ścian z otworami, ale bez wysp w otworach. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Wyciągnięcie Części z twórcy ścian + + + + Supports making faces with holes, does not support nesting. + Umożliwia stworzenie ścian z otworami, nie umożliwia zagnieżdżania. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 9824254a30..c757a3fcb4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Não implementado. + Intersection of two faces. @@ -4128,7 +4128,7 @@ durante a leitura de arquivos. A importação levará mais tempo e mais detalhes <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed which results in increased detail/resolution.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tesselação</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Define o desvio máximo da malha tesselada para a superfície. Quanto menor o valor, mais lenta a velocidade de renderização, o que resulta em maior detalhe/resolução.</span></p></body></html> @@ -5651,56 +5651,13 @@ in the 3D view for the sweep path. Erro de entrada - - Part_FaceMaker - - - Bull's-eye facemaker - Facemaker Olho-de-boi - - - - Supports making planar faces with holes with islands. - Suporta fazer faces planas com buracos com ilhas. - - - - Simple - Simples - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Faz faces planas separadas de cada arame independentemente. Não há suporte para furos; os arames podem estar em diferentes planos. - - - - Cheese facemaker - Facemaker Queijo - - - - Supports making planar faces with holes, but no islands inside holes. - Suporta fazer faces planas com buracos, mas não há ilhas dentro de buracos. - - - - Part Extrude facemaker - Facemaker extrusão de peças - - - - Supports making faces with holes, does not support nesting. - Suporta fazer faces com furos, não suporta aninhamento. - - QObject - + Edit %1 Editar %1 @@ -5792,20 +5749,20 @@ Deseja continuar? Nenhuma referência selecionada - + Face Face - + Edge Aresta - + Vertex Vértice @@ -6122,7 +6079,7 @@ Deseja continuar? Limpar todas as dimensões - + Set colors... Definir cores... @@ -6914,4 +6871,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simples + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Faz faces planas separadas de cada arame independentemente. Não há suporte para furos; os arames podem estar em diferentes planos. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Facemaker Olho-de-boi + + + + Supports making planar faces with holes with islands. + Suporta fazer faces planas com buracos com ilhas. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Facemaker Queijo + + + + Supports making planar faces with holes, but no islands inside holes. + Suporta fazer faces planas com buracos, mas não há ilhas dentro de buracos. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Facemaker extrusão de peças + + + + Supports making faces with holes, does not support nesting. + Suporta fazer faces com furos, não suporta aninhamento. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index cc9b866339..9c3a6462a5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Não implementado. + Intersection of two faces. @@ -5664,56 +5664,13 @@ in the 3D view for the sweep path. Erro de Inserção - - Part_FaceMaker - - - Bull's-eye facemaker - Criador de faces Olho-de-boi - - - - Supports making planar faces with holes with islands. - Suporta fazer faces planas com buracos com ilhas. - - - - Simple - Simples - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Faz faces planas separadas de cada traço independentemente. Não há suporte para furos; os traços podem estar em diferentes planos. - - - - Cheese facemaker - Criador de faces Queijo - - - - Supports making planar faces with holes, but no islands inside holes. - Suporta fazer faces planas com buracos, mas não há ilhas dentro de buracos. - - - - Part Extrude facemaker - Criador de faces extrudir peça - - - - Supports making faces with holes, does not support nesting. - Suporta fazer faces com furos, não suporta "aninhamento". - - QObject - + Edit %1 Edite %1 @@ -5804,20 +5761,20 @@ Do you want to continue? Nenhuma referência selecionada - + Face Face - + Edge Borda - + Vertex Vertex @@ -6134,7 +6091,7 @@ Do you want to continue? Clear all dimensions - + Set colors... Definir cores... @@ -6926,4 +6883,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simples + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Faz faces planas separadas de cada traço independentemente. Não há suporte para furos; os traços podem estar em diferentes planos. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Criador de faces Olho-de-boi + + + + Supports making planar faces with holes with islands. + Suporta fazer faces planas com buracos com ilhas. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Criador de faces Queijo + + + + Supports making planar faces with holes, but no islands inside holes. + Suporta fazer faces planas com buracos, mas não há ilhas dentro de buracos. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Criador de faces extrudir peça + + + + Supports making faces with holes, does not support nesting. + Suporta fazer faces com furos, não suporta "aninhamento". + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 88f3e56c16..34a389a99c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Neimplementat. + Intersection of two faces. @@ -5670,56 +5670,13 @@ in vizualizarea 3D pentru calea maturarii. Eroare de intrare - - Part_FaceMaker - - - Bull's-eye facemaker - Générator de fațete țintă - - - - Supports making planar faces with holes with islands. - Sprijină efectuarea feţele plane cu Insule. - - - - Simple - Simplu - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Construiți planuri de fațete separate plecând de la fiecare linie independent. fpr suport pentru găuri; liniile pot fi în diferite planuri. - - - - Cheese facemaker - Générator de fațete șvaițer - - - - Supports making planar faces with holes, but no islands inside holes. - Sprijină efectuarea faţete plane cu gauri, dar nu cu Insulele în interiorul găurilor. - - - - Part Extrude facemaker - Generator de fațete extrudate - - - - Supports making faces with holes, does not support nesting. - Suportă crearea de fațete cu găuri dar nu suportă imbricare. - - QObject - + Edit %1 Editare %1 @@ -5810,20 +5767,20 @@ Do you want to continue? Nicio referință selecționată - + Face Faţă - + Edge Margine - + Vertex Vertex @@ -6140,7 +6097,7 @@ Do you want to continue? Șterge toate dimensiunile - + Set colors... Seteaza culorile... @@ -6932,4 +6889,64 @@ Un "Filtru combinat" poate fi folosit pentru a extrage piesele rămase.All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simplu + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Construiți planuri de fațete separate plecând de la fiecare linie independent. fpr suport pentru găuri; liniile pot fi în diferite planuri. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Générator de fațete țintă + + + + Supports making planar faces with holes with islands. + Sprijină efectuarea feţele plane cu Insule. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Générator de fațete șvaițer + + + + Supports making planar faces with holes, but no islands inside holes. + Sprijină efectuarea faţete plane cu gauri, dar nu cu Insulele în interiorul găurilor. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Generator de fațete extrudate + + + + Supports making faces with holes, does not support nesting. + Suportă crearea de fațete cu găuri dar nu suportă imbricare. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 9df7a4503c..0ea710f4ec 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Не реализовано. + Intersection of two faces. @@ -2254,7 +2254,7 @@ of projection. Section - Разрез (Сечение) + Разделить @@ -2360,7 +2360,7 @@ of projection. Solid - Твердое тело + Твердотельный объект @@ -2557,7 +2557,7 @@ Note: The placement is expressed in local space of object being attached. Section - Разделить + Разрез (Сечение) @@ -2685,7 +2685,7 @@ Note: The placement is expressed in local space of object being attached. STEP - STEP + ШАГ @@ -2994,7 +2994,7 @@ If both lengths are zero, magnitude of direction is used. Shape - Фигура(ы) + Фигура @@ -3278,7 +3278,7 @@ Please check one or more edge entities first. Import - импорт + Импорт @@ -3389,7 +3389,7 @@ during file reading (slower but higher details). Position: - Расположение: + Позиция: @@ -3442,7 +3442,7 @@ during file reading (slower but higher details). Position: - Позиция: + Расположение: @@ -3524,7 +3524,7 @@ during file reading (slower but higher details). STEP - ШАГ + STEP @@ -4514,7 +4514,7 @@ the sketch plane's normal vector will be used Loft - Чердак (под крышей) + Профиль @@ -4778,7 +4778,7 @@ only created cuts will be visible Wrong selection - Неправильное выделение + Неправильный выбор @@ -4891,7 +4891,7 @@ only created cuts will be visible Wrong selection - Неправильный выбор + Неправильное выделение @@ -5434,7 +5434,7 @@ by dragging a selection rectangle in the 3D view Loft - Профиль + Чердак (под крышей) @@ -5668,56 +5668,13 @@ in the 3D view for the sweep path. Ошибка ввода - - Part_FaceMaker - - - Bull's-eye facemaker - Гранедел мишенеобразный - - - - Supports making planar faces with holes with islands. - Поддерживает создание плоских поверхностей с отверстиями, которые могут содержать островки. - - - - Simple - Простой - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Делает отдельную плоскую грань из каждой ломаной независимо. Нет поддержки отверстий; ломаные могут быть на разных плоскостях. - - - - Cheese facemaker - Сырообразый гранедел - - - - Supports making planar faces with holes, but no islands inside holes. - Поддерживает создание плоских граней с отверстиями, но без островков внутри отверстий. - - - - Part Extrude facemaker - Выдавливающий деталь гранедел - - - - Supports making faces with holes, does not support nesting. - Поддерживает создание граней с отверстиями, вложения не поддерживаются. - - QObject - + Edit %1 Редактировать %1 @@ -5808,27 +5765,28 @@ Do you want to continue? Не выбрано ни одного ориентира - + Face Грань - + Edge Ребро - + Vertex Вершина Compound - Объединение + Соединить +Группировка @@ -5838,7 +5796,7 @@ Do you want to continue? Solid - Твердотельный объект + Твердое тело @@ -5853,7 +5811,7 @@ Do you want to continue? Shape - Фигура + Фигура(ы) @@ -6138,7 +6096,7 @@ Do you want to continue? Очистить все размеры - + Set colors... Установите цвета ... @@ -6213,7 +6171,7 @@ Do you want to continue? Solids - Массивы + Твердотельные объекты @@ -6243,8 +6201,7 @@ Do you want to continue? Compound - Соединить -Группировка + Объединение @@ -6254,7 +6211,7 @@ Do you want to continue? Measure - Измерения + Измерить @@ -6616,7 +6573,7 @@ It will create a 'Compound Filter' for each shape. Solids - Твердотельные объекты + Массивы @@ -6936,4 +6893,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. Все фильтры выбора очищены + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Простой + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Делает отдельную плоскую грань из каждой ломаной независимо. Нет поддержки отверстий; ломаные могут быть на разных плоскостях. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Гранедел мишенеобразный + + + + Supports making planar faces with holes with islands. + Поддерживает создание плоских поверхностей с отверстиями, которые могут содержать островки. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Сырообразый гранедел + + + + Supports making planar faces with holes, but no islands inside holes. + Поддерживает создание плоских граней с отверстиями, но без островков внутри отверстий. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Выдавливающий деталь гранедел + + + + Supports making faces with holes, does not support nesting. + Поддерживает создание граней с отверстиями, вложения не поддерживаются. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 8a804dd715..2cec047913 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + Oglišče @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Ni izvedeno. + Intersection of two faces. @@ -2995,7 +2995,7 @@ If both lengths are zero, magnitude of direction is used. Shape - Oblika(e) + Oblika @@ -4781,7 +4781,7 @@ bodo prikazane le prerezne ploskve Wrong selection - Napačen izbor + Napačna izbira @@ -4894,7 +4894,7 @@ bodo prikazane le prerezne ploskve Wrong selection - Napačna izbira + Napačen izbor @@ -4975,7 +4975,7 @@ bodo prikazane le prerezne ploskve Attachment Offset (in local coordinates): - Odmik pripetka (v lokalnih koordinatah): + Odmik pripetka (v krajevnih sorednicah): @@ -5674,56 +5674,13 @@ in the 3D view for the sweep path. Napaka vnosa - - Part_FaceMaker - - - Bull's-eye facemaker - Tarčast ploskovnik - - - - Supports making planar faces with holes with islands. - Podpira ustvarjanje ravninskih ploskev z luknjami in otoki. - - - - Simple - Enostaven - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Ustvari ločene ravninske ploskve neodvisno, iz vsakega črtovja. Ni podrto za luknje; črtovja so lahko v različnih ravninah. - - - - Cheese facemaker - Sirast ploskovnik - - - - Supports making planar faces with holes, but no islands inside holes. - Podpira ustvarjanje ravninskih ploskev z luknjami, vendar brez otokv v lukanjah za razliko od tarčastega ploskovnika. - - - - Part Extrude facemaker - Ploskovnik izrivanja delov - - - - Supports making faces with holes, does not support nesting. - Podpira ustvarjanje ploskev z luknjami, vendar brez vdevanja. - - QObject - + Edit %1 Uredi %1 @@ -5815,22 +5772,22 @@ Ali želite nadaljevati? Noben sklic ni izbran - + Face Ploskev - + Edge Rob - + Vertex - Oglišče + Vertex @@ -5860,7 +5817,7 @@ Ali želite nadaljevati? Shape - Oblika + Oblika(e) @@ -6145,7 +6102,7 @@ Ali želite nadaljevati? Izbriši vse kote - + Set colors... Nastavi barve … @@ -6566,7 +6523,7 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Attachment Offset (in local coordinates): - Odmik pripetka (v krajevnih sorednicah): + Odmik pripetka (v lokalnih koordinatah): @@ -6936,4 +6893,64 @@ Ostale dele lahko izvelečet s "sitom sestava". All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Enostaven + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Ustvari ločene ravninske ploskve neodvisno, iz vsakega črtovja. Ni podrto za luknje; črtovja so lahko v različnih ravninah. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Tarčast ploskovnik + + + + Supports making planar faces with holes with islands. + Podpira ustvarjanje ravninskih ploskev z luknjami in otoki. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Sirast ploskovnik + + + + Supports making planar faces with holes, but no islands inside holes. + Podpira ustvarjanje ravninskih ploskev z luknjami, vendar brez otokv v lukanjah za razliko od tarčastega ploskovnika. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Ploskovnik izrivanja delov + + + + Supports making faces with holes, does not support nesting. + Podpira ustvarjanje ploskev z luknjami, vendar brez vdevanja. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts index 6d4ef06062..b0366c5022 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr-CS.ts @@ -31,7 +31,7 @@ Line Attacher reference type - Linija + Duž @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + Teme @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Nije sprovedeno. + Intersection of two faces. @@ -3068,7 +3068,7 @@ Ako su obe dužine nula, koristi se jedinična vrednost. Length: - Length: + Dužina: @@ -3624,7 +3624,7 @@ during file reading (slower but higher details). Line - Linija + Duž @@ -3641,7 +3641,7 @@ during file reading (slower but higher details). Length: - Dužina: + Length: @@ -5665,50 +5665,7 @@ in the 3D view for the sweep path. Input error - Greška pri unosu - - - - Part_FaceMaker - - - Bull's-eye facemaker - Metoliki tvorac stranica - - - - Supports making planar faces with holes with islands. - Podržava pravljenje ravnih stranica sa rupama u kojima se nalaze ostrva. - - - - Simple - Jednostavno - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Pravi posebnu ravnu stranicu od svake žice nezavisno. Ne podržava rupe; žice mogu biti na različitim ravnima. - - - - Cheese facemaker - Siroliki tvorac stranica - - - - Supports making planar faces with holes, but no islands inside holes. - Podržava pravljenje ravnih stranica sa rupama u kojima se nalaze ostrva. - - - - Part Extrude facemaker - Part izvlačenje tvorac stranica - - - - Supports making faces with holes, does not support nesting. - Podrška pravljenju stranica sa rupama, isključuje mogućnost slaganja. + Input error @@ -5716,8 +5673,8 @@ in the 3D view for the sweep path. - + Edit %1 Uredi %1 @@ -5809,22 +5766,22 @@ Da li želiš da nastaviš? Nije izabrana referenca - + Face Stranica - + Edge Ivica - + Vertex - Teme + Vertex @@ -6139,7 +6096,7 @@ Da li želiš da nastaviš? Obriši sve kote - + Set colors... Ofarbaj stranice @@ -6931,4 +6888,64 @@ Ova bulova logička operacija uklanja sve delove objekata koji se preklapaju. Svi filteri izbora su obrisani + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Jednostavno + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Pravi posebnu ravnu stranicu od svake žice nezavisno. Ne podržava rupe; žice mogu biti na različitim ravnima. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Metoliki tvorac stranica + + + + Supports making planar faces with holes with islands. + Podržava pravljenje ravnih stranica sa rupama u kojima se nalaze ostrva. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Siroliki tvorac stranica + + + + Supports making planar faces with holes, but no islands inside holes. + Podržava pravljenje ravnih stranica sa rupama u kojima se nalaze ostrva. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Part izvlačenje tvorac stranica + + + + Supports making faces with holes, does not support nesting. + Podrška pravljenju stranica sa rupama, isključuje mogućnost slaganja. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index 88ebda5ea3..94080a9bf7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -31,7 +31,7 @@ Line Attacher reference type - Линија + Дуж @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + Теме @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Није спроведено. + Intersection of two faces. @@ -3624,7 +3624,7 @@ during file reading (slower but higher details). Line - Линија + Дуж @@ -5667,56 +5667,13 @@ in the 3D view for the sweep path. Грешка приликом уноса - - Part_FaceMaker - - - Bull's-eye facemaker - Метолики творац страница - - - - Supports making planar faces with holes with islands. - Подржава прављење равних страница са рупама у којима се налазе острва. - - - - Simple - Једноставно - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Прави посебну равну страницу од сваке жице независно. Не подржава рупе; жице могу бити на различитим равнима. - - - - Cheese facemaker - Сиролики творац страница - - - - Supports making planar faces with holes, but no islands inside holes. - Подржава прављење равних страница са рупама у којима се налазе острва. - - - - Part Extrude facemaker - Part извлачење творац страница - - - - Supports making faces with holes, does not support nesting. - Подршка прављењу страница са рупама, искључује могућност слагања. - - QObject - + Edit %1 Уреди %1 @@ -5808,22 +5765,22 @@ Do you want to continue? Није изабрана референца - + Face Страница - + Edge Ивица - + Vertex - Теме + Vertex @@ -6138,7 +6095,7 @@ Do you want to continue? Обриши све коте - + Set colors... Офарбај странице @@ -6930,4 +6887,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. Сви филтери избора су обрисани + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Једноставно + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Прави посебну равну страницу од сваке жице независно. Не подржава рупе; жице могу бити на различитим равнима. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Метолики творац страница + + + + Supports making planar faces with holes with islands. + Подржава прављење равних страница са рупама у којима се налазе острва. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Сиролики творац страница + + + + Supports making planar faces with holes, but no islands inside holes. + Подржава прављење равних страница са рупама у којима се налазе острва. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Part извлачење творац страница + + + + Supports making faces with holes, does not support nesting. + Подршка прављењу страница са рупама, искључује могућност слагања. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 6e64beb6db..90c46626b6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Ej implementerat. + Intersection of two faces. @@ -5671,56 +5671,13 @@ in the 3D view for the sweep path. Inmatningsfel - - Part_FaceMaker - - - Bull's-eye facemaker - Ytskapare mitt-i-prick - - - - Supports making planar faces with holes with islands. - Stöder skapande av plana ytor med hål med öar. - - - - Simple - Enkel - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Skapar plana ytor från varje tråd separat. Inget stöd för hål; trådar kan vara i olika plan. - - - - Cheese facemaker - Ytskapare schweizerost - - - - Supports making planar faces with holes, but no islands inside holes. - Stöder plana ytor med hål, men inga öar i hålen. - - - - Part Extrude facemaker - Ytskapare för komponentextrudering - - - - Supports making faces with holes, does not support nesting. - Stöder skapande av ytor med hål, stöder inte packning. - - QObject - + Edit %1 Redigera %1 @@ -5798,7 +5755,7 @@ Vill du fortsätta? All Files - Alla filer + Alla Filer @@ -5812,20 +5769,20 @@ Vill du fortsätta? Ingen referens markerad - + Face Yta - + Edge Kant - + Vertex Hörn @@ -6142,7 +6099,7 @@ Vill du fortsätta? Clear all dimensions - + Set colors... Ställ in färgerna ... @@ -6934,4 +6891,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Enkel + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Skapar plana ytor från varje tråd separat. Inget stöd för hål; trådar kan vara i olika plan. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Ytskapare mitt-i-prick + + + + Supports making planar faces with holes with islands. + Stöder skapande av plana ytor med hål med öar. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Ytskapare schweizerost + + + + Supports making planar faces with holes, but no islands inside holes. + Stöder plana ytor med hål, men inga öar i hålen. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Ytskapare för komponentextrudering + + + + Supports making faces with holes, does not support nesting. + Stöder skapande av ytor med hål, stöder inte packning. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 3fa1e8706d..2a646c21f0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Uygulanmadı. + Intersection of two faces. @@ -522,7 +522,7 @@ Translate origin AttachmentPlane mode caption - Menşeyi çevir + Orijini Naklet @@ -719,7 +719,7 @@ Translate origin Attachment3D mode caption - Menşeyi çevir + Orijini Naklet @@ -5650,56 +5650,13 @@ bir veya daha fazla profil seçin ilave kenar veya tel seçin. Girdi hatası - - Part_FaceMaker - - - Bull's-eye facemaker - Bull'ın göz fasiyesi - - - - Supports making planar faces with holes with islands. - Adalı delikli düzlemsel yüzlerin oluşturulmasını destekler. - - - - Simple - Basit - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Ayrı düzlemi yüzünü her telden bağımsız olarak yapar. Delikler için destek yok; teller farklı düzlemlerde olabilir. - - - - Cheese facemaker - Peynir makyajcısı - - - - Supports making planar faces with holes, but no islands inside holes. - Delikli düzlemsel yüzeyler oluşturmayı destekler, ancak deliklerin içinde adalar yoktur. - - - - Part Extrude facemaker - Parça ekstrüzyon yüz ölçümü - - - - Supports making faces with holes, does not support nesting. - Yüzleri deliklerle destekleme desteği, iç içe yerleştirmeyi desteklemez. - - QObject - + Edit %1 %1'i düzenle @@ -5791,20 +5748,20 @@ Devam etmek istiyor musun? Seçilen referans yok - + Face Yüz - + Edge Kenar - + Vertex Vertex @@ -6121,7 +6078,7 @@ Devam etmek istiyor musun? Tüm ölçüleri temizle - + Set colors... Renkleri ayarla... @@ -6913,4 +6870,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Basit + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Ayrı düzlemi yüzünü her telden bağımsız olarak yapar. Delikler için destek yok; teller farklı düzlemlerde olabilir. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Bull'ın göz fasiyesi + + + + Supports making planar faces with holes with islands. + Adalı delikli düzlemsel yüzlerin oluşturulmasını destekler. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Peynir makyajcısı + + + + Supports making planar faces with holes, but no islands inside holes. + Delikli düzlemsel yüzeyler oluşturmayı destekler, ancak deliklerin içinde adalar yoktur. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Parça ekstrüzyon yüz ölçümü + + + + Supports making faces with holes, does not support nesting. + Yüzleri deliklerle destekleme desteği, iç içe yerleştirmeyi desteklemez. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index e2185ccfa5..8445376b62 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - Не реалізовано. + Intersection of two faces. @@ -5675,56 +5675,13 @@ in the 3D view for the sweep path. Помилка вводу - - Part_FaceMaker - - - Bull's-eye facemaker - Bull's-eye facemaker - - - - Supports making planar faces with holes with islands. - Supports making planar faces with holes with islands. - - - - Simple - Простий - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - - - - Cheese facemaker - Cheese facemaker - - - - Supports making planar faces with holes, but no islands inside holes. - Supports making planar faces with holes, but no islands inside holes. - - - - Part Extrude facemaker - Part Extrude facemaker - - - - Supports making faces with holes, does not support nesting. - Supports making faces with holes, does not support nesting. - - QObject - + Edit %1 Редагувати %1 @@ -5815,20 +5772,20 @@ Do you want to continue? Не вибрано орієнтира - + Face Грань - + Edge Ребро - + Vertex Вершина @@ -6145,7 +6102,7 @@ Do you want to continue? Видалити всі розміри - + Set colors... Встановити кольори... @@ -6937,4 +6894,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Простий + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Bull's-eye facemaker + + + + Supports making planar faces with holes with islands. + Supports making planar faces with holes with islands. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Cheese facemaker + + + + Supports making planar faces with holes, but no islands inside holes. + Supports making planar faces with holes, but no islands inside holes. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Part Extrude facemaker + + + + Supports making faces with holes, does not support nesting. + Supports making faces with holes, does not support nesting. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index 99948b5d96..5633a0cc48 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - No implementat + Intersection of two faces. @@ -5664,56 +5664,13 @@ in the 3D view for the sweep path. Input error - - Part_FaceMaker - - - Bull's-eye facemaker - Generador de cares de tipus diana - - - - Supports making planar faces with holes with islands. - Permet fer cares planes amb forats amb illes. - - - - Simple - Simple - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - Construeix una cara plana separada a partir de cada filferro independentment. No hi ha cap suport per a forats; els fils poden ser sobre diferents plans. - - - - Cheese facemaker - Generador de cares de tipus formatge - - - - Supports making planar faces with holes, but no islands inside holes. - Permet fer cares planes amb forats, però no illes dins dels forats. - - - - Part Extrude facemaker - Generador de cares de tipus extrusió de peça - - - - Supports making faces with holes, does not support nesting. - Permet fer cares amb forats, no admet la imbricació. - - QObject - + Edit %1 Edita %1 @@ -5804,20 +5761,20 @@ Do you want to continue? No s'ha seleccionat cap referència. - + Face Cara - + Edge Aresta - + Vertex Vertex @@ -6134,7 +6091,7 @@ Do you want to continue? Clear all dimensions - + Set colors... Estableix els colors... @@ -6926,4 +6883,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + Simple + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + Construeix una cara plana separada a partir de cada filferro independentment. No hi ha cap suport per a forats; els fils poden ser sobre diferents plans. + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + Generador de cares de tipus diana + + + + Supports making planar faces with holes with islands. + Permet fer cares planes amb forats amb illes. + + + + Part::FaceMakerCheese + + + Cheese facemaker + Generador de cares de tipus formatge + + + + Supports making planar faces with holes, but no islands inside holes. + Permet fer cares planes amb forats, però no illes dins dels forats. + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + Generador de cares de tipus extrusió de peça + + + + Supports making faces with holes, does not support nesting. + Permet fer cares amb forats, no admet la imbricació. + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index a9b0c0df4e..b7f92e4a6b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - 未执行. + Intersection of two faces. @@ -5662,56 +5662,13 @@ in the 3D view for the sweep path. 输入错误 - - Part_FaceMaker - - - Bull's-eye facemaker - 牛眼面生成器 - - - - Supports making planar faces with holes with islands. - 支持制作带有小孔的平面面。 - - - - Simple - 简易 - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - 独立地从每根导线分离平面面。不支持孔; 电线可以在不同的平面上。 - - - - Cheese facemaker - 奶酪面生成器 - - - - Supports making planar faces with holes, but no islands inside holes. - 支持用孔生成平面, 但在孔内没有岛。 - - - - Part Extrude facemaker - 报表视图拉伸面生成器 - - - - Supports making faces with holes, does not support nesting. - 支持用孔制作面孔, 不支持嵌套。 - - QObject - + Edit %1 编辑 %1 @@ -5802,20 +5759,20 @@ Do you want to continue? 没有参照被选中 - + Face 面 - + Edge 边 - + Vertex 顶点 @@ -6132,7 +6089,7 @@ Do you want to continue? Clear all dimensions - + Set colors... 设置颜色... @@ -6924,4 +6881,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. 所有选择过滤规则已清除 + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + 简易 + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + 独立地从每根导线分离平面面。不支持孔; 电线可以在不同的平面上。 + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + 牛眼面生成器 + + + + Supports making planar faces with holes with islands. + 支持制作带有小孔的平面面。 + + + + Part::FaceMakerCheese + + + Cheese facemaker + 奶酪面生成器 + + + + Supports making planar faces with holes, but no islands inside holes. + 支持用孔生成平面, 但在孔内没有岛。 + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + 报表视图拉伸面生成器 + + + + Supports making faces with holes, does not support nesting. + 支持用孔制作面孔, 不支持嵌套。 + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 5767eb8415..9d306feba5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -226,7 +226,7 @@ Vertex AttachmentPoint mode caption - Vertex + 頂點 @@ -439,9 +439,9 @@ - Not implemented. + Intersection of two faces. AttachmentLine mode tooltip - 未實作。 + Intersection of two faces. @@ -5637,56 +5637,13 @@ in the 3D view for the sweep path. 輸入錯誤 - - Part_FaceMaker - - - Bull's-eye facemaker - 靶心面生成器 - - - - Supports making planar faces with holes with islands. - 支援在平面上建立帶有孔洞和島嶼的面。 - - - - Simple - 簡單 - - - - Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. - 從每個獨立的線生成單獨的平面面。不支援孔洞；線可以在不同的平面上。 - - - - Cheese facemaker - 起司面生成器 - - - - Supports making planar faces with holes, but no islands inside holes. - 支援在平面上創建具有孔洞但沒有孔洞內部島嶼的面。 - - - - Part Extrude facemaker - 部件拉伸面生成器 - - - - Supports making faces with holes, does not support nesting. - 支援製作帶有孔洞的面，但不支援巢狀孔洞。 - - QObject - + Edit %1 編輯 %1 @@ -5778,22 +5735,22 @@ Do you want to continue? 尚未選擇參考之物件 - + Face 面 - + Edge 邊 - + Vertex - 頂點 + Vertex @@ -6108,7 +6065,7 @@ Do you want to continue? 清除所有尺寸 - + Set colors... 設定顏色... @@ -6887,4 +6844,64 @@ A 'Compound Filter' can be used to extract the remaining pieces. All selection filters cleared + + FaceMaker + + + Shape must be a wire, edge or compound. Something else was supplied. + Shape must be a wire, edge or compound. Something else was supplied. + + + + Part::FaceMakerSimple + + + Simple + 簡單 + + + + Makes separate plane face from every wire independently. No support for holes; wires can be on different planes. + 從每個獨立的線生成單獨的平面面。不支援孔洞；線可以在不同的平面上。 + + + + Part::FaceMakerBullseye + + + Bull's-eye facemaker + 靶心面生成器 + + + + Supports making planar faces with holes with islands. + 支援在平面上建立帶有孔洞和島嶼的面。 + + + + Part::FaceMakerCheese + + + Cheese facemaker + 起司面生成器 + + + + Supports making planar faces with holes, but no islands inside holes. + 支援在平面上創建具有孔洞但沒有孔洞內部島嶼的面。 + + + + Part::FaceMakerExtrusion + + + Part Extrude facemaker + 部件拉伸面生成器 + + + + Supports making faces with holes, does not support nesting. + 支援製作帶有孔洞的面，但不支援巢狀孔洞。 + + diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index a461c7ce20..558184cbee 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -877,8 +877,8 @@ so that self intersection is avoided. - + Make copy @@ -903,8 +903,8 @@ so that self intersection is avoided. - + Add a Body @@ -1447,39 +1447,29 @@ If zero, it is equal to Radius2 - - Cone radii are equal - - - - - The radii for cones must not be equal! - - - - - - + + + Invalid wedge parameters - + X min must not be equal to X max! - + Y min must not be equal to Y max! - + Z min must not be equal to Z max! - + Create primitive @@ -2815,7 +2805,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment @@ -3361,17 +3351,17 @@ click again to end selection - + Move tip - + The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? @@ -3446,28 +3436,28 @@ click again to end selection - - - + + + + + - - A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? @@ -3707,12 +3697,12 @@ This may lead to unexpected results. - + Dependency violation - + Early feature must not depend on later feature. @@ -3729,14 +3719,14 @@ This may lead to unexpected results. - + Vertical sketch axis - + Horizontal sketch axis @@ -3788,10 +3778,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr - - + + Edit %1 @@ -4742,17 +4732,17 @@ over 90: larger hole radius at the bottom - - - - + + + + + + - - Resulting shape is not a solid @@ -4767,22 +4757,22 @@ over 90: larger hole radius at the bottom - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. @@ -4845,8 +4835,8 @@ over 90: larger hole radius at the bottom - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4854,14 +4844,14 @@ over 90: larger hole radius at the bottom - + Creating a face from sketch failed - + Revolve axis intersects the sketch @@ -4871,14 +4861,14 @@ over 90: larger hole radius at the bottom - + Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. @@ -4932,10 +4922,10 @@ Intersecting sketch entities in a sketch are not allowed. - + Error: Result is not a solid @@ -5037,31 +5027,31 @@ Intersecting sketch entities in a sketch are not allowed. + - Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range - + Thread size out of range - + Error: Thread could not be built @@ -5364,63 +5354,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - - - - Height of cone too small - - + + Radius of ellipsoid too small - - + + Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small - + Height of prism is too small - + delta x of wedge too small - + delta y of wedge too small - + delta z of wedge too small - + delta z2 of wedge is negative - + delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts index 2034970f23..4f4300adc4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts @@ -884,8 +884,8 @@ False = унутраная шасцярня Стварыць дублікат - + Make copy Зрабіць копію @@ -910,8 +910,8 @@ False = унутраная шасцярня Стварыць лагічную аперацыю - + Add a Body Дадаць цела @@ -1457,39 +1457,29 @@ If zero, it is equal to Radius2 Налады першаснага цела - - Cone radii are equal - Радыусы конусу аднолькавыя - - - - The radii for cones must not be equal! - Радыусы конусаў не павінны быць аднолькавымі! - - - - - + + + Invalid wedge parameters Хібныя налады кліну - + X min must not be equal to X max! X min не павінен быць аднолькавым з X max! - + Y min must not be equal to Y max! Y min не павінен быць аднолькавым з Y max! - + Z min must not be equal to Z max! Z min не павінен быць аднолькавым з Z max! - + Create primitive Стварыць першаснае цела @@ -1611,7 +1601,7 @@ click again to end selection Input error - Input error + Памылка ўводу @@ -1672,7 +1662,7 @@ click again to end selection Select - Абраць + Select @@ -1912,7 +1902,7 @@ click again to end selection Select reference... - Select reference... + Абраць апорны элемент... @@ -2475,7 +2465,7 @@ measured along the specified direction Reversed - Reversed + Наадварот @@ -2659,7 +2649,7 @@ measured along the specified direction Input error - Памылка ўводу + Input error @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Прымацаваныя @@ -2878,12 +2868,12 @@ measured along the specified direction Horizontal sketch axis - Horizontal sketch axis + Гарызантальная вось эскізу Vertical sketch axis - Vertical sketch axis + Вертыкальная вось эскізу @@ -3045,7 +3035,7 @@ click again to end selection Select - Select + Абраць @@ -3157,7 +3147,7 @@ click again to end selection Select reference... - Абраць апорны элемент... + Select reference... @@ -3382,17 +3372,17 @@ click again to end selection Абраць элемент з спісу - + Move tip Рухаць кончык - + The moved feature appears after the currently set tip. Зрушаны аб'ект з'яўляецца пасля бягучага становішча кончыка. - + Do you want the last feature to be the new tip? Вы жадаеце, каб апошні элемент была новым кончыкам? @@ -3467,28 +3457,28 @@ click again to end selection Калі ласка, спачатку стварыце плоскасць, альбо абярыце грань на эскізе - - - + + + + + - - A dialog is already open in the task panel На панэлі задач дыялогавае акно ўжо адчыненае - - - + + + + + - - Do you want to close this dialog? Ці жадаеце вы зачыніць дыялогавае акно? @@ -3732,12 +3722,12 @@ This may lead to unexpected results. Пачатак цела - + Dependency violation Парушэнне ўмоў залежнасці - + Early feature must not depend on later feature. @@ -3756,16 +3746,16 @@ This may lead to unexpected results. Немагчыма стварыць элемент адымання без даступнага асноўнага элементу - + Vertical sketch axis - Вертыкальная вось эскізу + Vertical sketch axis - + Horizontal sketch axis - Гарызантальная вось эскізу + Horizontal sketch axis @@ -3817,10 +3807,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Каб ужыць гэты элемент, ён павінен належаць да аб'екту дэталі ў дакуменце. - - + + Edit %1 Змяніць %1 @@ -4318,7 +4308,7 @@ Only available for holes without thread Standard - Звычайны + Стандартны @@ -4479,7 +4469,7 @@ over 90: larger hole radius at the bottom Reversed - Наадварот + Reversed @@ -4780,17 +4770,17 @@ over 90: larger hole radius at the bottom Зліццё інструментаў не атрымалася - - - - + + + + + + - - Resulting shape is not a solid Выніковая фігура атрымалася не суцэльным целам @@ -4805,22 +4795,22 @@ over 90: larger hole radius at the bottom Агульная аперацыя завяршылася няўдачай - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Вынік змяшчае некалькі суцэльных цел: у бягучы час гэтае не падтрымліваецца. @@ -4883,8 +4873,8 @@ over 90: larger hole radius at the bottom Вугал пазу занадта малы - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4894,14 +4884,14 @@ over 90: larger hole radius at the bottom - абраны эскіз не належыць да бягучага Цела. - + Creating a face from sketch failed Не атрымалася стварыць грань з эскізу - + Revolve axis intersects the sketch Вось вярчэння перасякае эскіз @@ -4911,14 +4901,14 @@ over 90: larger hole radius at the bottom Не атрымалася выразаць асноўны элемент - + Could not revolve the sketch! Не атрымалася павярнуць эскіз! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Не атрымалася стварыць грань з эскізу. @@ -4973,10 +4963,10 @@ Intersecting sketch entities in a sketch are not allowed. Памылка: не атрымалася пабудаваць - + Error: Result is not a solid Памылка: вынік не суцэльнае цела @@ -5078,32 +5068,32 @@ Intersecting sketch entities in a sketch are not allowed. Памылка: не атрымалася дадаць разьбу + - Boolean operation failed Лагічная аперацыя завяршылася няўдачай - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Не атрымалася стварыць грань з эскізу. Перасякальныя сутнасці эскізу ці некалькі граняў у эскізе не дапускаюцца для стварэння кішэні да грані. - + Thread type out of range Тып разьбы па-за межамі дыяпазону - + Thread size out of range Памер разьбы па-за межамі дыяпазону - + Error: Thread could not be built Памылка: не атрымалася пабудаваць разьбу @@ -5407,63 +5397,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - Радыусы конусаў не павінны быць аднолькавымі - - - Height of cone too small Вышыня конусу занадта малая - - + + Radius of ellipsoid too small Радыус эліпсоіду занадта малы - - + + Radius of torus too small Радыус тору занадта малы - + Polygon of prism is invalid, must have 3 or more sides Хібны шматкутнік прызмы, павінен мець тры ці больш бакоў - + Circumradius of the polygon, of the prism, is too small Радыус акружнасці шматкутніку прызмы занадта малы - + Height of prism is too small Вышыня прызмы занадта малая - + delta x of wedge too small дэльта X кліну занадта малая - + delta y of wedge too small дэльта Y кліну занадта малая - + delta z of wedge too small дэльта Z кліну занадта малая - + delta z2 of wedge is negative дэльта Z2 кліну адмоўная - + delta x2 of wedge is negative дэльта X2 кліну адмоўная @@ -5518,7 +5503,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Active body - Active body + Бягучае цела diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index ea0733aa43..d5cdd16a60 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -883,8 +883,8 @@ de manera que s'evita l'autointersecció. Crea un clon - + Make copy Fer còpia @@ -909,8 +909,8 @@ de manera que s'evita l'autointersecció. Crea booleà - + Add a Body Afegiu un cos @@ -1456,39 +1456,29 @@ Si el valor és zero, serà igual al Radi2 Paràmetres primitius - - Cone radii are equal - Els radis del con són iguals - - - - The radii for cones must not be equal! - Els radis del con no poden ser iguals! - - - - - + + + Invalid wedge parameters Paràmetres invàlids de la falca - + X min must not be equal to X max! X min no ha de ser igual a X max! - + Y min must not be equal to Y max! Y min no ha de ser igual a Y max! - + Z min must not be equal to Z max! Z min no ha de ser igual a Z max! - + Create primitive Crea un primitiu @@ -2835,7 +2825,7 @@ mesurada al llarg de la direcció especificada PartDesignGui::TaskPrimitiveParameters - + Attachment Adjunt @@ -3384,17 +3374,17 @@ clica altre cop per finalitzar la selecció Seleccioneu una característica de la llista - + Move tip Mou la punta - + The moved feature appears after the currently set tip. La característica moguda apareix després de la punta establerta actualment. - + Do you want the last feature to be the new tip? Voleu que la darrera característica sigui la nova punta? @@ -3469,28 +3459,28 @@ clica altre cop per finalitzar la selecció Si us plau, crear un plànol primer o seleccioneu una cara a esbossar - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3732,12 +3722,12 @@ Això pot portar a resultats inesperats. Començament del cos - + Dependency violation Incompliment de la dependència - + Early feature must not depend on later feature. @@ -3756,14 +3746,14 @@ Això pot portar a resultats inesperats. No és possible crear un pla Sustractiu sense una base pla disponible - + Vertical sketch axis Eix vertical de croquis - + Horizontal sketch axis Eix horitzontal de croquis @@ -3817,10 +3807,10 @@ Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funci Per utilitzar aquesta característica cal que pertanyen a un objecte de part del document. - - + + Edit %1 Editar %1 @@ -4780,17 +4770,17 @@ més de 90: radi de forat més gran a la part inferior Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4805,22 +4795,22 @@ més de 90: radi de forat més gran a la part inferior Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4883,8 +4873,8 @@ més de 90: radi de forat més gran a la part inferior Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4894,14 +4884,14 @@ més de 90: radi de forat més gran a la part inferior - l'esbós seleccionat no pertany al Cos actiu. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4911,14 +4901,14 @@ més de 90: radi de forat més gran a la part inferior Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4973,10 +4963,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5078,32 +5068,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5407,63 +5397,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index 5529acf30b..e3a1144b90 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -883,8 +883,8 @@ aby se zabránilo sebe. Vytvořit klon - + Make copy Vytvořit kopii @@ -909,8 +909,8 @@ aby se zabránilo sebe. Použít booleovské operace - + Add a Body Přidat těleso @@ -1456,39 +1456,29 @@ Je-li nulový, rovná se Poloměr2 Parametry primitivního tělesa - - Cone radii are equal - Poloměr kužele je roven - - - - The radii for cones must not be equal! - Poloměry kužele se nesmí rovnat! - - - - - + + + Invalid wedge parameters Neplatné parametry klínu - + X min must not be equal to X max! X min se nesmí rovnat X max! - + Y min must not be equal to Y max! Y min se nesmí rovnat Y max! - + Z min must not be equal to Z max! Z min se nesmí rovnat Z max! - + Create primitive Vytvořit základní těleso @@ -2835,7 +2825,7 @@ měřena ve stanoveném směru PartDesignGui::TaskPrimitiveParameters - + Attachment Připojení @@ -3384,17 +3374,17 @@ klikněte znovu pro ukončení výběru Vyberte prvek ze seznamu - + Move tip Přesunout tip - + The moved feature appears after the currently set tip. Přesunutý prvek se zobrazí za aktuálně nastavenou špičkou. - + Do you want the last feature to be the new tip? Přejete si, aby byl poslední prvek novou špičkou? @@ -3469,28 +3459,28 @@ klikněte znovu pro ukončení výběru Nejprve vytvořte rovinu nebo vyberte plochu, na kterou chcete vytvořit náčrt - - - + + + + + - - A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - - - + + + + + - - Do you want to close this dialog? Chcete zavřít tento dialog? @@ -3734,12 +3724,12 @@ To může vést k neočekávaným výsledkům. Začátek tělesa - + Dependency violation Porušení závislosti - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ To může vést k neočekávaným výsledkům. Není možné vytvořit odečtový prvek bez základního prvku - + Vertical sketch axis Svislá skicovací osa - + Horizontal sketch axis Vodorovná skicovací osa @@ -3819,10 +3809,10 @@ Pokud máte starší dokument s objekty PartDesignu bez tělesa, použijte funkc Pro použití tohoto prvku je potřebné, aby patřil k objektu díl v dokumentu. - - + + Edit %1 Upravit %1 @@ -4783,17 +4773,17 @@ nad 90: větší poloměr díry ve spodní části Sloučení nástrojů se nezdařilo - - - - + + + + + + - - Resulting shape is not a solid Výsledný tvar není plné těleso @@ -4808,22 +4798,22 @@ nad 90: větší poloměr díry ve spodní části Operace průniku selhala - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Výsledek se skládá z více těles: to není v současné době podporováno. @@ -4886,8 +4876,8 @@ nad 90: větší poloměr díry ve spodní části Úhel drážky příliš malý - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4898,14 +4888,14 @@ nad 90: větší poloměr díry ve spodní části - vybraný náčrt nepatří k aktivnímu tělesu. - + Creating a face from sketch failed Vytvoření plochy z náčrtu selhalo - + Revolve axis intersects the sketch Osa otáčení protíná náčrt @@ -4915,14 +4905,14 @@ nad 90: větší poloměr díry ve spodní části Výřez zakladního prvku selhal - + Could not revolve the sketch! Nelze otočit náčrt! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nelze vytvořit plochu z náčrtu. @@ -4977,10 +4967,10 @@ Protínání entit náčrtu v náčrtu není povoleno. Chyba: Nelze vytvořit - + Error: Result is not a solid Chyba: Výsledek není plné těleso @@ -5082,32 +5072,32 @@ Protínání entit náčrtu v náčrtu není povoleno. Chyba: Přidání závitu selhalo + - Boolean operation failed Booleovská operace selhala - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nelze vytvořit plochu z náčrtu. Protínání entit náčrtu nebo několika ploch v náčrtu není povoleno pro vytvoření kapsy k ploše. - + Thread type out of range Typ závitu mino rozsah - + Thread size out of range Velikost závitu mimo rozsah - + Error: Thread could not be built Chyba: Závit nelze vytvořit @@ -5411,63 +5401,58 @@ Nejsou povoleny protínající se prvky náčrtu nebo více ploch v náčrtu. - The radii for cones must not be equal - Poloměry kuželů se nesmí rovnat - - - Height of cone too small Výška kužele je příliš malá - - + + Radius of ellipsoid too small Poloměr elipsoidu je příliš malý - - + + Radius of torus too small Poloměr prstence je příliš malý - + Polygon of prism is invalid, must have 3 or more sides Mnohoúhelník hranolu je neplatný, musí mít 3 a více stran - + Circumradius of the polygon, of the prism, is too small Kruhový poloměr mnohoúhelníku hranolu je příliš malý - + Height of prism is too small Výška hranolu je příliš malá - + delta x of wedge too small delta x klínu je příliš malá - + delta y of wedge too small delta y klínu je příliš malá - + delta z of wedge too small delta z klínu je příliš malá - + delta z2 of wedge is negative delta z2 klínu je záporná - + delta x2 of wedge is negative delta x2 klínu je záporná diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 439629d994..f567155442 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -883,8 +883,8 @@ damit eine Selbstdurchdringung vermieden wird. Klon erstellen - + Make copy Kopie erstellen @@ -909,8 +909,8 @@ damit eine Selbstdurchdringung vermieden wird. Boolean erstellen - + Add a Body Einen Körper hinzufügen @@ -1455,39 +1455,29 @@ Wenn Null, ist er gleich Radius2 Parameter des Grundkörpers - - Cone radii are equal - Kegelradien sind gleich - - - - The radii for cones must not be equal! - Die Radien für Kegel dürfen nicht gleich sein! - - - - - + + + Invalid wedge parameters Ungültige Keil-Parameter - + X min must not be equal to X max! X min darf nicht gleich X max sein! - + Y min must not be equal to Y max! Y min darf nicht gleich Y max sein! - + Z min must not be equal to Z max! Z min darf nicht gleich Z max sein! - + Create primitive Grundkörper erstellen @@ -1619,8 +1609,8 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Click button to enter selection mode, click again to end selection - Klicken Sie auf den Button um in den Auswahl-Modus zu gelangen. -Nochmaliges Klicken beendet den Auswahl-Modus. + Klicken Sie auf die Schaltfläche, um den Auswahlmodus zu betreten, +erneut klicken um die Auswahl zu beenden @@ -1687,7 +1677,7 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Remove - Löschen + Entfernen @@ -2124,7 +2114,7 @@ erneut klicken um die Auswahl zu beenden Update view - Ansicht aktualisieren + Ansicht aktualisieren @@ -2177,7 +2167,7 @@ erneut klicken um die Auswahl zu beenden Update view - Ansicht aktualisieren + Ansicht aktualisieren @@ -2230,7 +2220,7 @@ erneut klicken um die Auswahl zu beenden Error - Fehler + Fehlermeldungen @@ -2364,7 +2354,7 @@ erneut klicken um die Auswahl zu beenden Dimension - Höhe (Länge) + Tiefe (Länge) @@ -2506,7 +2496,7 @@ entlang der angegebenen Richtung gemessen Update view - Ansicht aktualisieren + Ansicht aktualisieren @@ -2730,7 +2720,7 @@ entlang der angegebenen Richtung gemessen Dimension - Tiefe (Länge) + Tiefenmaß @@ -2778,7 +2768,7 @@ entlang der angegebenen Richtung gemessen Reverse direction - Richtung umkehren + Umgekehrte Richtung @@ -2828,13 +2818,13 @@ entlang der angegebenen Richtung gemessen Error - Fehlermeldungen + Fehler PartDesignGui::TaskPrimitiveParameters - + Attachment Anhang @@ -2850,7 +2840,7 @@ entlang der angegebenen Richtung gemessen Dimension - Tiefenmaß + Abmessung @@ -2861,7 +2851,7 @@ entlang der angegebenen Richtung gemessen Base X axis - Basis X-Achse + Basis-X-Achse @@ -2873,7 +2863,7 @@ entlang der angegebenen Richtung gemessen Base Z axis - Basis Z-Achse + Basis-Z-Achse @@ -2989,7 +2979,7 @@ entlang der angegebenen Richtung gemessen Update view - Ansicht aktualisieren + Ansicht aktualisieren @@ -3039,8 +3029,8 @@ entlang der angegebenen Richtung gemessen Click button to enter selection mode, click again to end selection - Klicken Sie auf die Schaltfläche, um den Auswahlmodus zu betreten, -erneut klicken um die Auswahl zu beenden + Klicken Sie auf den Button um in den Auswahl-Modus zu gelangen. +Nochmaliges Klicken beendet den Auswahl-Modus. @@ -3142,7 +3132,7 @@ erneut klicken um die Auswahl zu beenden Base X axis - Basis-X-Achse + Basis X-Achse @@ -3152,7 +3142,7 @@ erneut klicken um die Auswahl zu beenden Base Z axis - Basis-Z-Achse + Basis Z-Achse @@ -3383,17 +3373,17 @@ erneut klicken um die Auswahl zu beenden Ein Objekt aus der Liste wählen - + Move tip Arbeitsposition versetzen - + The moved feature appears after the currently set tip. Das bewegte Objekt erscheint hinter der aktuell gesetzten Arbeitsposition. - + Do you want the last feature to be the new tip? Soll das letzte Objekt die neue Arbeitsposition sein? @@ -3415,7 +3405,7 @@ erneut klicken um die Auswahl zu beenden Error - Fehler + Fehlermeldungen @@ -3468,28 +3458,28 @@ erneut klicken um die Auswahl zu beenden Zum Erzeugen einer Skizze zuerst eine Ebene im Koordinatensystem oder auf einem Körper wählen - - - + + + + + - - A dialog is already open in the task panel Es ist bereits ein Dialog in der Aufgabenleiste geöffnet - - - + + + + + - - Do you want to close this dialog? Möchten Sie diesen Dialog zu schließen? @@ -3731,12 +3721,12 @@ This may lead to unexpected results. Anfang des Körpers - + Dependency violation Abhängigkeitsverletzung - + Early feature must not depend on later feature. @@ -3755,14 +3745,14 @@ This may lead to unexpected results. Es ist nicht möglich, ein abzuziehendes Objekt ohne ein Basisobjekt zu erstellen - + Vertical sketch axis Vertikale Skizzenachse - + Horizontal sketch axis Horizontale Skizzenachse @@ -3817,10 +3807,10 @@ Bitte aktivieren (Doppelklick) Sie einen oder erstellen einen neuen Körper.Um diese Funktion verwenden zu können, muss es Teil einer Baugruppe im Dokument sein. - - + + Edit %1 %1 bearbeiten @@ -4780,17 +4770,17 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Fusion der Werkzeuge fehlgeschlagen - - - - + + + + + + - - Resulting shape is not a solid Die resultierende Form ist kein Festkörper @@ -4805,22 +4795,22 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Vereinigung fehlgeschlagen - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Das Ergebnis enthält mehrere Festkörper: Dies wird derzeit leider nicht unterstützt. @@ -4883,8 +4873,8 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Winkel der Nut zu klein - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4894,14 +4884,14 @@ unter 90: kleinerer Bohrungsradius an der Unterseite - Die gewählte Skizze gehört nicht zum aktiven Körper. - + Creating a face from sketch failed Es konnte keine Fläche aus der Skizze erstellt werden - + Revolve axis intersects the sketch Die Drehachse schneidet die Skizze @@ -4911,14 +4901,14 @@ unter 90: kleinerer Bohrungsradius an der Unterseite Das Ausschneiden des Basis-Formelements ist fehlgeschlagen - + Could not revolve the sketch! Konnte die Skizze nicht drehen! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Konnte keine Fläche aus der Skizze erstellen. @@ -4973,10 +4963,10 @@ Skizzenobjekte dürfen einander nicht schneiden. Fehler: Konnte leider keine Helix erstellen - + Error: Result is not a solid Fehler: Ergebnis ist kein Festkörper @@ -5078,32 +5068,32 @@ Skizzenobjekte dürfen einander nicht schneiden. Fehler: Konnte das Gewinde nicht hinzufügen + - Boolean operation failed Boolesche Operation fehlgeschlagen - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Es konnte keine Fläche aus der Skizze erstellt werden. Beim Erstellen von Taschen bis zu einer Fläche sind nur einzelne Flächen in der Skizze erlaubt. Mehrere Flächen oder sich überschneidende Skizzenobjekte können nicht auf ein Mal bearbeitet werden. - + Thread type out of range Gewindetyp außerhalb des Bereichs - + Thread size out of range Gewindegröße außerhalb des Bereichs - + Error: Thread could not be built Fehler: Gewinde konnte nicht gebaut werden @@ -5408,63 +5398,58 @@ Im Original: "Der Pfad darf keine Nullform sein." wenn Ihnen das besser hilft - The radii for cones must not be equal - Die Radien der Kegel dürfen nicht gleich sein - - - Height of cone too small Die Höhe des Kegels ist zu gering - - + + Radius of ellipsoid too small Der Radius des Ellipsoids ist zu klein - - + + Radius of torus too small Der Radius des Torus ist zu klein - + Polygon of prism is invalid, must have 3 or more sides Das Vieleck des Prismas ist ungültig; es muss 3 oder mehr Seiten haben - + Circumradius of the polygon, of the prism, is too small Umkreis des Polygons des Prismas ist zu klein - + Height of prism is too small Die Höhe des Prismas ist zu gering - + delta x of wedge too small Das delta x des Keils ist zu klein - + delta y of wedge too small Das delta x des Keils ist zu klein - + delta z of wedge too small Das delta z des Keils ist zu klein - + delta z2 of wedge is negative Das delta z2 des Keils ist negativ - + delta x2 of wedge is negative Das delta x2 des Keils ist negativ @@ -5519,7 +5504,7 @@ Im Original: "Der Pfad darf keine Nullform sein." wenn Ihnen das besser hilft Active body - Active body + Aktiver Körper diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index 45fe1920b2..fdb2f5a621 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -882,8 +882,8 @@ so that self intersection is avoided. Create Clone - + Make copy Δημιουργία αντιγράφου @@ -908,8 +908,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Add a Body @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 Παράμετροι θεμελιακών στοιχείων - - Cone radii are equal - Οι ακτίνες του κώνου είναι ίσες - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive Δημιουργήστε θεμελιακό στοιχείο @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Συνημμένο @@ -3383,17 +3373,17 @@ click again to end selection Επιλέξτε ένα χαρακτηριστικό από τη λίστα - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3468,28 +3458,28 @@ click again to end selection Παρακαλώ δημιουργήστε πρώτα ένα επίπεδο ή επιλέξτε την όψη πάνω στην οποία θα δημιουργήσετε σκαρίφημα - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3733,12 +3723,12 @@ This may lead to unexpected results. Αρχή του σώματος - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3757,14 +3747,14 @@ This may lead to unexpected results. Δεν είναι εφικτό να δημιουργήσετε αφαιρετικό χαρακτηριστικό χωρίς κάποιο διαθέσιμο χαρακτηριστικό βάσης - + Vertical sketch axis Κάθετος άξονας σκίτσου - + Horizontal sketch axis Οριζόντιος άξονας σκίτσου @@ -3818,10 +3808,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Προκειμένου να χρησιμοποιήσετε αυτό το χαρακτηριστικό θα πρέπει να ανήκει σε κάποιο εξάρτημα που βρίσκεται στο έγγραφο. - - + + Edit %1 Επεξεργασία %1 @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts index 10f6498355..63b27723a3 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts @@ -883,8 +883,8 @@ False=engranaje interno Clona - + Make copy Copia @@ -909,8 +909,8 @@ False=engranaje interno Crear Booleano - + Add a Body Añadir un Cuerpo @@ -1456,39 +1456,29 @@ Si es cero, es igual a Radius2 Parámetros primitivos - - Cone radii are equal - Los radios de los conos son iguales - - - - The radii for cones must not be equal! - ¡Los radios para los conos deben ser diferentes! - - - - - + + + Invalid wedge parameters Parámetros de cuña inválidos - + X min must not be equal to X max! ¡X min debe ser diferente a X max! - + Y min must not be equal to Y max! ¡Y min debe ser diferente a Y max! - + Z min must not be equal to Z max! Z min debe ser diferente a Z max! - + Create primitive Crear primitiva @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Adjunto @@ -3383,17 +3373,17 @@ haga clic de nuevo para finalizar la selección Seleccionar una operación desde la lista - + Move tip Mover ápice - + The moved feature appears after the currently set tip. La característica movida aparece después de la punta configurada en ese momento. - + Do you want the last feature to be the new tip? ¿Quiere que la última característica sea la nueva punta? @@ -3468,28 +3458,28 @@ haga clic de nuevo para finalizar la selección Por favor, crea un plano primero o selecciona una cara para croquizar - - - + + + + + - - A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - + + + + + - - Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3733,12 +3723,12 @@ Esto puede conducir a resultados inesperados. Principio del cuerpo - + Dependency violation Violación de dependencias - + Early feature must not depend on later feature. @@ -3757,14 +3747,14 @@ Esto puede conducir a resultados inesperados. No es posible crear una operación sustractiva sin una operación base disponible - + Vertical sketch axis Eje vertical del croquis - + Horizontal sketch axis Eje horizontal del croquis @@ -3818,10 +3808,10 @@ Si tienes un documento heredado con objetos DiseñoDePieza sin un Cuerpo, utiliz Para poder utilizar esta operación necesita pertenecer a un objeto de pieza en el documento. - - + + Edit %1 Editar %1 @@ -4709,12 +4699,12 @@ más de 90: radio de agujero más grande en la parte inferior Shaft design wizard... - Asistente de diseño de eje... + Asistente de diseño de ejes... Start the shaft design wizard - Iniciar el asistente de diseño de ejes + Inicia el asistente de diseño de ejes @@ -4781,17 +4771,17 @@ más de 90: radio de agujero más grande en la parte inferior Fusión de herramientas fallida - - - - + + + + + + - - Resulting shape is not a solid La forma resultante no es un sólido @@ -4806,22 +4796,22 @@ más de 90: radio de agujero más grande en la parte inferior Operación común fallida - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. El resultado tiene múltiples sólidos: esto no está soportado actualmente. @@ -4884,8 +4874,8 @@ más de 90: radio de agujero más grande en la parte inferior Ángulo de ranura demasiado pequeño - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4896,14 +4886,14 @@ más de 90: radio de agujero más grande en la parte inferior - el croquis seleccionado no pertenece al Cuerpo activo. - + Creating a face from sketch failed Fallo al crear una cara a partir del croquis - + Revolve axis intersects the sketch Eje de revolución interseca el croquis @@ -4913,14 +4903,14 @@ más de 90: radio de agujero más grande en la parte inferior Recorte de función base fallido - + Could not revolve the sketch! No se pudo revolucionar el croquis! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. No se pudo crear la cara a partir del croquis. @@ -4975,10 +4965,10 @@ No se permiten las entidades de croquis intersectas en un croquis. Error: No se pudo construir - + Error: Result is not a solid Error: El resultado no es un sólido @@ -5080,32 +5070,32 @@ No se permiten las entidades de croquis intersectas en un croquis. Error: Error al añadir la rosca + - Boolean operation failed Operación booleana fallida - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. No se pudo crear la cara a partir del croquis. No se permiten interceptar entidades de croquis o múltiples caras en un croquis para hacer un bolsillo hasta una cara. - + Thread type out of range Tipo de rosca fuera de rango - + Thread size out of range Tamaño de rosca fuera de rango - + Error: Thread could not be built Error: No se pudo construir la rosca @@ -5409,63 +5399,58 @@ No se permiten interceptar entidades de croquis o múltiples caras en un croquis - The radii for cones must not be equal - Los radios de los conos no deben ser iguales - - - Height of cone too small Altura del cono demasiado pequeña - - + + Radius of ellipsoid too small Radio de elipsoide demasiado pequeño - - + + Radius of torus too small Radio de toroide demasiado pequeño - + Polygon of prism is invalid, must have 3 or more sides El polígono del prisma no es válido, debe tener 3 o más lados - + Circumradius of the polygon, of the prism, is too small Circunradio del polígono, del prisma, es demasiado pequeño - + Height of prism is too small La altura del prisma es demasiado pequeña - + delta x of wedge too small delta x de cuña demasiado pequeña - + delta y of wedge too small delta y de cuña demasiado pequeña - + delta z of wedge too small delta z de cuña demasiado pequeña - + delta z2 of wedge is negative delta z2 de cuña es negativa - + delta x2 of wedge is negative delta x2 de cuña es negativa @@ -5520,7 +5505,7 @@ No se permiten interceptar entidades de croquis o múltiples caras en un croquis Active body - Active body + Cuerpo activo diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 394f56bde0..5c11620c4b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -883,8 +883,8 @@ para que se evite la auto intersección. Crear Clon - + Make copy Hacer copia @@ -909,8 +909,8 @@ para que se evite la auto intersección. Crear Booleano - + Add a Body Añadir un Cuerpo @@ -1456,39 +1456,29 @@ Si es cero, es igual a Radio2 Parámetros primitivos - - Cone radii are equal - Los radios de los conos son iguales - - - - The radii for cones must not be equal! - ¡El radio para los conos no debe ser igual! - - - - - + + + Invalid wedge parameters Parámetros de cuña inválidos - + X min must not be equal to X max! ¡X min no debe ser igual a X max! - + Y min must not be equal to Y max! ¡Y min no debe ser igual a Y max! - + Z min must not be equal to Z max! Z min no debe ser igual a Z max! - + Create primitive Crear primitiva @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Adjunto @@ -3383,17 +3373,17 @@ haga clic de nuevo para finalizar la selección Seleccionar una función desde la lista - + Move tip Mover punta - + The moved feature appears after the currently set tip. La característica movida aparece después de la punta configurada en ese momento. - + Do you want the last feature to be the new tip? ¿Quiere que la última característica sea la nueva punta? @@ -3468,28 +3458,28 @@ haga clic de nuevo para finalizar la selección Por favor, crea un plano primero o selecciona una cara para croquizar - - - + + + + + - - A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - + + + + + - - Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3729,12 +3719,12 @@ This may lead to unexpected results. Principio del cuerpo - + Dependency violation Violación de dependencias - + Early feature must not depend on later feature. @@ -3753,14 +3743,14 @@ This may lead to unexpected results. No es posible crear una función de resta sin una base característica disponible - + Vertical sketch axis Eje vertical del croquis - + Horizontal sketch axis Eje horizontal del croquis @@ -3814,10 +3804,10 @@ Si tienes un documento heredado con objetos PartDesign sin un Cuerpo, utiliza la Para poder usar esta operación debe pertenecer a una pieza objeto en el documento. - - + + Edit %1 Editar %1 @@ -4777,17 +4767,17 @@ más de 90: radio de agujero más grande en la parte inferior Fusión de herramientas fallida - - - - + + + + + + - - Resulting shape is not a solid La forma resultante no es un sólido @@ -4802,22 +4792,22 @@ más de 90: radio de agujero más grande en la parte inferior Operación común fallida - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. El resultado tiene múltiples sólidos: que no está soportado actualmente. @@ -4880,8 +4870,8 @@ más de 90: radio de agujero más grande en la parte inferior Ángulo de ranura demasiado pequeño - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4892,14 +4882,14 @@ más de 90: radio de agujero más grande en la parte inferior - el croquis seleccionado no pertenece al Cuerpo activo. - + Creating a face from sketch failed Fallo al crear una cara a partir del croquis - + Revolve axis intersects the sketch El eje de revolución intercepta el croquis @@ -4909,14 +4899,14 @@ más de 90: radio de agujero más grande en la parte inferior Recorte de función base fallido - + Could not revolve the sketch! ¡No se puede girar el boceto! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. No se pudo crear la cara a partir del boceto. @@ -4971,10 +4961,10 @@ No se permite la intersección de entidades en un boceto. Error: No se pudo construir - + Error: Result is not a solid Error: El resultado no es un sólido @@ -5076,32 +5066,32 @@ No se permite la intersección de entidades en un boceto. Error: Fallo al añadir la rosca + - Boolean operation failed Operación booleana fallida - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. No se pudo crear la cara a partir del croquis. No se permiten interceptar entidades de croquis o múltiples caras en un croquis para hacer un bolsillo hasta una cara. - + Thread type out of range Tipo de rosca fuera de rango - + Thread size out of range Tamaño de rosca fuera de rango - + Error: Thread could not be built Error: No se pudo construir la rosca @@ -5405,63 +5395,58 @@ No se permiten interceptar entidades de croquis o múltiples caras en un croquis - The radii for cones must not be equal - Los radios de los conos no deben ser iguales - - - Height of cone too small Altura del cono demasiado pequeña - - + + Radius of ellipsoid too small Radio de elipsoides demasiado pequeño - - + + Radius of torus too small Radio de toro demasiado pequeño - + Polygon of prism is invalid, must have 3 or more sides El polígono del prisma no es válido, debe tener 3 o más lados - + Circumradius of the polygon, of the prism, is too small El circunradio del polígono, del prisma, es demasiado pequeño - + Height of prism is too small La altura del prisma es demasiado pequeña - + delta x of wedge too small delta x de cuña demasiado pequeña - + delta y of wedge too small delta y de cuña demasiado pequeña - + delta z of wedge too small delta z de cuña demasiado pequeña - + delta z2 of wedge is negative delta z2 de cuña es negativa - + delta x2 of wedge is negative delta x2 de cuña es negativa @@ -5516,7 +5501,7 @@ No se permiten interceptar entidades de croquis o múltiples caras en un croquis Active body - Active body + Cuerpo activo diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 4842ac00df..72dbe80a02 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -882,8 +882,8 @@ so that self intersection is avoided. Sortu klona - + Make copy Egin kopia @@ -908,8 +908,8 @@ so that self intersection is avoided. Sortu boolearra - + Add a Body Gehitu gorputz bat @@ -1455,39 +1455,29 @@ Zero bada, 2. erradioaren berdina da Jatorrizkoaren parametroak - - Cone radii are equal - Konoaren erradioak berdinak dira - - - - The radii for cones must not be equal! - Konoen erradioek ez dute berdinak izan behar! - - - - - + + + Invalid wedge parameters Falka-parametro baliogabeak - + X min must not be equal to X max! X minimoak eta X maximoak ez dute berdinak izan behar! - + Y min must not be equal to Y max! Y minimoak eta Y maximoak ez dute berdinak izan behar! - + Z min must not be equal to Z max! Z minimoak eta Z maximoak ez dute berdinak izan behar! - + Create primitive Sortu jatorrizkoa @@ -2834,7 +2824,7 @@ zehaztutako norabidean PartDesignGui::TaskPrimitiveParameters - + Attachment Eranskina @@ -3383,17 +3373,17 @@ sakatu berriro hautapena amaitzeko Hautatu zerrendako elementu bat - + Move tip Mugitu punta - + The moved feature appears after the currently set tip. Lekuz aldatutako elementua unean ezarritako puntaren ondoren ageri da. - + Do you want the last feature to be the new tip? Azken elementua punta berria izan dadin nahi duzu? @@ -3468,28 +3458,28 @@ sakatu berriro hautapena amaitzeko Krokisa sortzeko, lehenengo sortu plano bat edo hautatu aurpegi bat - - - + + + + + - - A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - - - + + + + + - - Do you want to close this dialog? Elkarrizketa-koadro hau itxi nahi duzu? @@ -3733,12 +3723,12 @@ Espero ez diren emaitzak gerta daitezke. Gorputzaren hasiera - + Dependency violation Mendekotasuna urratu da - + Early feature must not depend on later feature. @@ -3755,14 +3745,14 @@ Espero ez diren emaitzak gerta daitezke. Ezin da elementu kentzaile bat sortu oinarri-elementu bat erabilgarri ez badago - + Vertical sketch axis Krokisaren ardatz bertikala - + Horizontal sketch axis Krokisaren ardatz horizontala @@ -3816,10 +3806,10 @@ Bertsio zaharragoan dagoen dokumentu bat baduzu eta gorputzik gabeko PartDesign Ezaugarri hau erabili ahal izateko, dokumentuko pieza-objektu batekoa izan behar du. - - + + Edit %1 Editatu %1 @@ -4780,17 +4770,17 @@ over 90: larger hole radius at the bottom Tresnen fusioak huts egin du - - - - + + + + + + - - Resulting shape is not a solid Emaitza gisa sortutako forma ez da solidoa @@ -4805,22 +4795,22 @@ over 90: larger hole radius at the bottom Eragiketa arrunt batek huts egin du - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Emaitzak solido anitz ditu: hori ez da onartzen momentuz. @@ -4883,8 +4873,8 @@ over 90: larger hole radius at the bottom Artekaren angelua txikiegia da - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4895,14 +4885,14 @@ over 90: larger hole radius at the bottom - hautatutako krokisa ez da gorputz aktiboarena. - + Creating a face from sketch failed Huts egin du aurpegia krokis batetik sortzeak - + Revolve axis intersects the sketch Erreboluzio-ardatzak krokisa ebakitzen du @@ -4912,14 +4902,14 @@ over 90: larger hole radius at the bottom Oinarri-elementuaren inausketak huts egin du - + Could not revolve the sketch! Ezin da krokisa erreboluzionatu - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Ezin da aurpegia sortu krokisetik abiatuta. @@ -4974,10 +4964,10 @@ Ez da onartzen krokis bateko entitateak ebakitzea. Errorea: Ezin da eraiki - + Error: Result is not a solid Errorea: Emaitza ez da solidoa @@ -5079,32 +5069,32 @@ Ez da onartzen krokis bateko entitateak ebakitzea. Errorea: Haria gehitzeak huts egin du + - Boolean operation failed Eragiketa boolearrak huts egin du - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Ezin da aurpegia sortu krokisetik abiatuta. Ebakitzen diren krokis-entitateek edo krokis bateko aurpegi anitzek ezin dute poltsa bat egin aurpegi batetik. - + Thread type out of range Hari mota barrutitik kanpo dago - + Thread size out of range Hariaren tamaina barrutitik kanpo dago - + Error: Thread could not be built Errorea: Ezin da haria eraiki @@ -5408,63 +5398,58 @@ Ez da onartzen krokis bateko entitateak edo aurpegi anitz ebakitzea. - The radii for cones must not be equal - Konoen erradioek ezin dute berdinak izan - - - Height of cone too small Konoaren altuera txikiegia da - - + + Radius of ellipsoid too small Elipsoidearen erradioa txikiegia da - - + + Radius of torus too small Toruaren erradioa txikiegia da - + Polygon of prism is invalid, must have 3 or more sides Prismaren poligonoa baliogabea da, hiru alde edo gehiago eduki behar ditu - + Circumradius of the polygon, of the prism, is too small Poligonoaren, prismaren, zirkunerradioa txikiegia da - + Height of prism is too small Prismaren altuera txikiegia da - + delta x of wedge too small Falkaren X delta txikiegia da - + delta y of wedge too small Falkaren Y delta txikiegia da - + delta z of wedge too small Falkaren Z delta txikiegia da - + delta z2 of wedge is negative Falkaren Z2 delta negatiboa da - + delta x2 of wedge is negative Falkaren X2 delta negatiboa da diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index 1f5af2ba0e..26085fdce5 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Luo klooni - + Make copy Tee kopio @@ -909,8 +909,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Add a Body @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Alkeiskappaleen parametrit - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive Luo alkeiskappale @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Liitos @@ -3384,17 +3374,17 @@ click again to end selection Valitse piirre listalta - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3469,28 +3459,28 @@ click again to end selection Luo ensin taso tai valitse pinta jolle luonnos tehdään - - - + + + + + - - A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - - - + + + + + - - Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? @@ -3734,12 +3724,12 @@ Tämä voi johtaa odottamattomiin tuloksiin. Kappaleen alku - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Tämä voi johtaa odottamattomiin tuloksiin. Ei ole mahdollista tehdä leikkaavaa piirrettä ilman olemassaolevaa peruspiirrettä - + Vertical sketch axis Pystysuuntaisen luonnoksen akseli - + Horizontal sketch axis Vaakasuuntaisen luonnoksen akseli @@ -3819,10 +3809,10 @@ Jos asiakirja on vanhentunutta tyyppiä OsanSuunnittelu-objekteilla ilman kappal Jotta tätä piirrettä voitaisiin käyttää, sen pitäisi kuulua asiakirjaan sisältyvään osa-objektiin. - - + + Edit %1 Muokkaa %1 @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index a7eb1735bc..7506289a95 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -884,8 +884,8 @@ False=engrenage interne Créer un clone - + Make copy Faire une copie @@ -910,8 +910,8 @@ False=engrenage interne Créer un booléen - + Add a Body Ajouter un corps @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Paramètres de la primitive - - Cone radii are equal - Les rayon du cône sont égaux - - - - The radii for cones must not be equal! - Les rayons des cônes ne doivent pas être égaux ! - - - - - + + + Invalid wedge parameters Paramètres non valides de la pyramide tronquée - + X min must not be equal to X max! X min ne doit pas être égal à X max ! - + Y min must not be equal to Y max! Y min ne doit pas être égal à Y max ! - + Z min must not be equal to Z max! Z min ne doit pas être égal à Z max ! - + Create primitive Créer une primitive @@ -1838,7 +1828,7 @@ click again to end selection Radius: - Rayon : + Rayon : @@ -1943,7 +1933,7 @@ click again to end selection Height: - Hauteur : + Hauteur : @@ -1978,7 +1968,7 @@ click again to end selection Update view - Mise à jour de la vue + Mettre à jour la vue @@ -2120,7 +2110,7 @@ click again to end selection Update view - Mise à jour de la vue + Mettre à jour la vue @@ -2449,8 +2439,7 @@ le vecteur normal du plan de l'esquisse sera utilisé If unchecked, the length will be measured along the specified direction - Si non cochée, la longueur sera -mesurée dans la direction spécifiée + Si cette option n'est pas cochée, la longueur sera mesurée dans la direction spécifiée. @@ -2829,7 +2818,7 @@ mesurée dans la direction spécifiée PartDesignGui::TaskPrimitiveParameters - + Attachment Accrochage @@ -2889,7 +2878,7 @@ mesurée dans la direction spécifiée Angle: - Angle : + Angle : @@ -3051,7 +3040,7 @@ click again to end selection Thickness - Épaisseur + Évidement @@ -3376,17 +3365,17 @@ click again to end selection Sélectionner une fonction dans la liste - + Move tip Déplacer la fonction résultante - + The moved feature appears after the currently set tip. La fonction déplacée apparaît après la fonction résultante en cours. - + Do you want the last feature to be the new tip? Voulez-vous que la dernière fonction soit la nouvelle fonction résultante? @@ -3461,28 +3450,28 @@ click again to end selection Créer d'abord un plan ou choisir une face sur laquelle appliquer l'esquisse - - - + + + + + - - A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches - - - + + + + + - - Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? @@ -3722,12 +3711,12 @@ This may lead to unexpected results. Début du corps - + Dependency violation Violation de dépendance - + Early feature must not depend on later feature. @@ -3744,14 +3733,14 @@ This may lead to unexpected results. Il n’est pas possible de créer une fonction soustractive sans une fonction de base présente - + Vertical sketch axis Axe vertical de l'esquisse - + Horizontal sketch axis Axe horizontal de l'esquisse @@ -3805,10 +3794,10 @@ Si vous avez un vieux document avec des objets PartDesign sans corps, utilisez l Afin d'utiliser cette fonction, elle doit appartenir à un objet pièce dans le document. - - + + Edit %1 Modifier %1 @@ -3957,7 +3946,7 @@ Cette fonction est cassée et ne peut pas être modifiée. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Remarque : si vous choisissez de migrer, vous ne serez pas en mesure d'éditer le fichier avec d’anciennes versions de FreeCAD. Si vous refusez de migrer, vous ne serez pas en mesure d’utiliser les nouvelles fonctions de Part Design comme les corps et les pièces. Pour résultat, vous ne serez pas en mesure d’utiliser vos pièces dans l'atelier assemblage. Cependant, vous pourrez migrer à tout moment par la suite avec "PartDesign → Migrer". + Remarque : si vous choisissez de migrer, vous ne serez pas en mesure d'éditer le fichier avec d’anciennes versions de FreeCAD. Si vous refusez de migrer, vous ne serez pas en mesure d’utiliser les nouvelles fonctions de PartDesign comme les corps et les pièces. Pour résultat, vous ne serez pas en mesure d’utiliser vos pièces dans l'atelier assemblage. Cependant, vous pourrez migrer à tout moment par la suite avec "PartDesign → Migrer". @@ -4244,8 +4233,8 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Live update of changes to the thread Note that the calculation can take some time - Mise à jour en direct des modifications apportées au taraudage -Notez que le calcul peut prendre un certain temps + Mise à jour en temps réel des modifications apportées au taraudage. +Notez que le calcul peut prendre un certain temps. @@ -4765,17 +4754,17 @@ plus de 90 : rayon du trou plus grand à la base La fusion des outils a échoué - - - - + + + + + + - - Resulting shape is not a solid La forme résultante n'est pas un solide @@ -4790,22 +4779,22 @@ plus de 90 : rayon du trou plus grand à la base L'opération commune a échoué - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Le résultat a plusieurs solides : ce n'est pas pris en charge pour le moment. @@ -4868,8 +4857,8 @@ plus de 90 : rayon du trou plus grand à la base Angle de rainure trop petit - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4879,14 +4868,14 @@ plus de 90 : rayon du trou plus grand à la base - l'esquisse sélectionnée n'appartient pas au corps actif. - + Creating a face from sketch failed La création d'une face à partir de l'esquisse a échoué - + Revolve axis intersects the sketch L'axe de révolution coupe l'esquisse @@ -4896,14 +4885,14 @@ plus de 90 : rayon du trou plus grand à la base La découpe de l'élément de base a échoué - + Could not revolve the sketch! Impossible de tourner l'esquisse ! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Impossible de créer une face à partir de l'esquisse. @@ -4958,10 +4947,10 @@ Les entités d'intersection d'esquisse dans une esquisse ne sont pas autorisées Erreur : impossible de construire - + Error: Result is not a solid Erreur : le résultat n'est pas un solide @@ -5063,32 +5052,32 @@ Les entités d'intersection d'esquisse dans une esquisse ne sont pas autorisées Erreur : L'ajout du fil de suivi a échoué + - Boolean operation failed L'opération booléenne a échoué - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Impossible de créer une face à partir d'une esquisse. L'intersection d'entités d'esquisse ou de plusieurs faces dans une esquisse n'est pas autorisée pour créer une poche jusqu'à une face. - + Thread type out of range Type de filetage hors plage - + Thread size out of range Taille de filetage hors plage - + Error: Thread could not be built Erreur: le filetage n'a pas pu être construit @@ -5392,63 +5381,58 @@ Les entités d'esquisse qui se croisent ou les faces multiples dans une esquisse - The radii for cones must not be equal - Les rayons des cônes ne doivent pas être égaux - - - Height of cone too small La hauteur du cône est trop petite - - + + Radius of ellipsoid too small Le rayon de l'ellipsoïde est trop petit - - + + Radius of torus too small Le rayon du tore est trop petit - + Polygon of prism is invalid, must have 3 or more sides Le polygone du prisme est invalide, il doit avoir au moins 3 côtés - + Circumradius of the polygon, of the prism, is too small Le rayon du cercle circonscrit du polygone, du prisme, est trop petit - + Height of prism is too small La hauteur du prisme est trop petite - + delta x of wedge too small delta x de la pyramide tronquée trop petit - + delta y of wedge too small delta y de la pyramide tronquée trop petit - + delta z of wedge too small delta z de la pyramide tronquée trop petit - + delta z2 of wedge is negative delta z2 de la pyramide tronquée est négatif - + delta x2 of wedge is negative delta x2 de la pyramide tronquée est négatif @@ -5503,7 +5487,7 @@ Les entités d'esquisse qui se croisent ou les faces multiples dans une esquisse Active body - Active body + Corps actif diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts index 827d8f37b8..d07a45cb4f 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Create Clone - + Make copy Fai copia @@ -909,8 +909,8 @@ so that self intersection is avoided. Crear un booleano - + Add a Body Engadir corpo @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Parámetros primitiva - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive Crear primitiva @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Adxunto @@ -3384,17 +3374,17 @@ click again to end selection Escolme unha característica da listaxe - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3469,28 +3459,28 @@ click again to end selection Por favor, crear un plano de primeiro ou escolmar unha cara na que esbozar - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3734,12 +3724,12 @@ Esto pode levar a resultados inexperados. Principiando o corpo - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Esto pode levar a resultados inexperados. Non é posíbel crear unha característica subtractiva sen un recurso base dispoñíbel - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3819,10 +3809,10 @@ Se tes un antigo documento con obxectos PartDesign sen Corpo, usa a función mig Para usar este recurso é preciso que pertenza a un obxecto peza no documento. - - + + Edit %1 Editar %1 @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index 80578a52e3..8545fe712b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -883,8 +883,8 @@ tako da je izbjegnuto samopresjecanje. Stvori klon - + Make copy Napravi kopiju @@ -909,8 +909,8 @@ tako da je izbjegnuto samopresjecanje. Stvori logičku vrijednost - + Add a Body Dodaj tjelo @@ -1454,39 +1454,29 @@ Ako je nula, jednak je Polumjeru2 Parametri primitivnog tijela - - Cone radii are equal - Polumjeri stošca su isti - - - - The radii for cones must not be equal! - Polumjeri stošca ne moraju biti isti! - - - - - + + + Invalid wedge parameters Nevaljani parametri klina - + X min must not be equal to X max! X min ne smije biti jednak X max! - + Y min must not be equal to Y max! Y min ne smije biti jednak Y max! - + Z min must not be equal to Z max! Z min ne smije biti jednak Z max! - + Create primitive Stvori primitivno tijelo @@ -1909,7 +1899,7 @@ kliknite ponovno za završetak odabira Select reference... - Select reference... + Odaberite referencu... @@ -2835,7 +2825,7 @@ mjereno duž navedenog smjera PartDesignGui::TaskPrimitiveParameters - + Attachment Dodatak @@ -3158,7 +3148,7 @@ kliknite ponovno za završetak odabira Select reference... - Odaberite referencu... + Select reference... @@ -3383,17 +3373,17 @@ kliknite ponovno za završetak odabira Odabir elementa s popisa - + Move tip Pomjeri radnu poziciju - + The moved feature appears after the currently set tip. Pomjereni objekt pojavljuje se nakon trenutno postavljene radne pozicije - + Do you want the last feature to be the new tip? Želite li da posljednji objekt bude nova radna pozicija? @@ -3468,28 +3458,28 @@ kliknite ponovno za završetak odabira Molimo vas prvo stvorite ravninu ili odaberite lice za crtanje na - - - + + + + + - - A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - - - + + + + + - - Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? @@ -3735,12 +3725,12 @@ To može dovesti do neočekivanih rezultata. Početak tijela - + Dependency violation Kršenje ovisnosti - + Early feature must not depend on later feature. @@ -3759,14 +3749,14 @@ To može dovesti do neočekivanih rezultata. Nije moguće stvoriti dodavajući element bez pripadajućeg osnovnog elementa - + Vertical sketch axis Vertikalna os skice - + Horizontal sketch axis Horizontalna os skice @@ -3820,10 +3810,10 @@ Ako imate naslijeđeni dokument sa PartDesign objektom bez tijela koristite funk Da biste mogli koristiti ovu značajku ona mora pripadati objektu dio u dokumentu. - - + + Edit %1 Uređivanje %1 @@ -4792,17 +4782,17 @@ preko 90: veći polumjer rupe na dnu Spajanje Alata nije uspjelo - - - - + + + + + + - - Resulting shape is not a solid Stvoreni oblik nije volumen tijelo @@ -4817,22 +4807,22 @@ preko 90: veći polumjer rupe na dnu Uobičajena operacija nije uspjela - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Rezultat ima više volumenskih tijela: ovo trenutno nije podržano. @@ -4895,8 +4885,8 @@ preko 90: veći polumjer rupe na dnu Kut utora premali - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4907,14 +4897,14 @@ preko 90: veći polumjer rupe na dnu - odabrana skica ne pripada aktivnom tijelu. - + Creating a face from sketch failed Stvaranje lice od skice nije uspjelo - + Revolve axis intersects the sketch Os zaokreta presjeca skicu @@ -4924,14 +4914,14 @@ preko 90: veći polumjer rupe na dnu Izrez baznog elementa nije uspjelo - + Could not revolve the sketch! Nije moguće zavrtiti skicu! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nije moguće napraviti površinu pomoću skice. @@ -4986,10 +4976,10 @@ Nije dozvoljeno presjecanje elemenata na skici. Greška: nije moguće napraviti Heliks - + Error: Result is not a solid Greška: Rezultat nije volumensko tijelo @@ -5091,33 +5081,33 @@ Nije dozvoljeno presjecanje elemenata na skici. Greška: Dodaj navoj nije uspjelo + - Boolean operation failed Booleanska operacija nije uspjela - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nije moguće napraviti površinu pomoću skice. Ukrštanje elemenata skice ili više površina u skici nije dozvoljeno za izradu utora do plohe. - + Thread type out of range Vrsta navoja izvan dometa - + Thread size out of range Veličina navoja izvan dometa - + Error: Thread could not be built Greška: navoj nije moguće napraviti @@ -5422,63 +5412,58 @@ Nije dozvoljeno presjecanje elemenata ili višestruke površine na skici. - The radii for cones must not be equal - Polumjeri stošca ne smiju biti isti - - - Height of cone too small Visina stožca je premala - - + + Radius of ellipsoid too small Polumjer elipsoida je premali - - + + Radius of torus too small Polumjer torusa je premali - + Polygon of prism is invalid, must have 3 or more sides Višekutnik prizme neispravan, mora imati 3 ili više strana - + Circumradius of the polygon, of the prism, is too small Polumjer opsega višekutnika prizme je premali - + Height of prism is too small Visina prizme je premala - + delta x of wedge too small delta x od klina premala - + delta y of wedge too small delta y od klina premala - + delta z of wedge too small delta z od klina premala - + delta z2 of wedge is negative delta z2 od klina je negativna - + delta x2 of wedge is negative delta x2 od klina je negativna diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index bd1b67ee43..8f445a56c1 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -883,8 +883,8 @@ az önmetszés elkerülése érdekében. Klónozás - + Make copy Másolat készítése @@ -909,8 +909,8 @@ az önmetszés elkerülése érdekében. Logikai érték létrehozása - + Add a Body Test hozzáadás @@ -1456,39 +1456,29 @@ Ha zérus, azonos a Radius2-vel (2. sugárral?) Alaptest paraméterei - - Cone radii are equal - A kúp sugarak egyenlők - - - - The radii for cones must not be equal! - A kúpok sugarai nem lehetnek egyenlők! - - - - - + + + Invalid wedge parameters Érvénytelen ék paraméterek - + X min must not be equal to X max! X min nem lehet egyenlő X max-szal! - + Y min must not be equal to Y max! Y min nem lehet egyenlő Y max-szal! - + Z min must not be equal to Z max! Z min nem lehet egyenlő Z max-szal! - + Create primitive Alaptest létrehozása @@ -2831,7 +2821,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Melléklet @@ -3379,17 +3369,17 @@ click again to end selection Funkció kiválasztása a listából - + Move tip Csúcs mozgatása - + The moved feature appears after the currently set tip. A mozgatott jellemző a beállított csúcs mögött jelenik meg. - + Do you want the last feature to be the new tip? A legutóbbi jellemző legyen az új csúcs? @@ -3464,28 +3454,28 @@ click again to end selection Kérem, először hozzon létre egy síkot vagy válasszon egy felületet amin vázlatot készít - - - + + + + + - - A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - - - + + + + + - - Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? @@ -3729,12 +3719,12 @@ Ez nem várt eredményekhez vezethet. Test kezdete - + Dependency violation Függőség megsértése - + Early feature must not depend on later feature. @@ -3751,14 +3741,14 @@ Ez nem várt eredményekhez vezethet. Nincs lehetőség kivonandó funkció létrehozására az alap funkció nélkül - + Vertical sketch axis Vázlat függőleges tengelye - + Horizontal sketch axis Vázlat vízszintes tengelye @@ -3812,10 +3802,10 @@ Ha van egy örökölt dokumentum AlkatrészTervezés objektummal Test nélkül, Funkció használatához szükséges, hogy az egy alkatrész objektumhoz tartozzon a dokumentumban. - - + + Edit %1 %1 szerkesztése @@ -4776,17 +4766,17 @@ over 90: larger hole radius at the bottom A szerszám csatlakoztatása sikertelen - - - - + + + + + + - - Resulting shape is not a solid Az eredmény alakzat nem szilárd test @@ -4801,22 +4791,22 @@ over 90: larger hole radius at the bottom A közös művelet sikertelen - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Az eredménynek több szilárd teste van: ez jelenleg nem támogatott. @@ -4879,8 +4869,8 @@ over 90: larger hole radius at the bottom A horony szöge túl kicsi - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4890,14 +4880,14 @@ over 90: larger hole radius at the bottom - a kiválasztott vázlat nem az aktív testhez tartozik. - + Creating a face from sketch failed Nem sikerült felületet létrehozni vázlatból - + Revolve axis intersects the sketch A körbmetszési tengely metszi a vázlatot @@ -4907,14 +4897,14 @@ over 90: larger hole radius at the bottom Az alaptulajdonságból a kivágás sikertelen - + Could not revolve the sketch! Nem lehetett körmetszeni a vázlatot! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nem sikerült felületet létrehozni vázlatból. @@ -4969,10 +4959,10 @@ A vázlatelemek metszése egy vázlatban nem engedélyezett. Hiba: Nem sikerült felépíteni - + Error: Result is not a solid Hiba: Az eredmény nem szilárd test @@ -5074,32 +5064,32 @@ A vázlatelemek metszése egy vázlatban nem engedélyezett. Hiba: A menet hozzáadása sikertelen + - Boolean operation failed A logikai művelet sikertelen - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nem sikerült felületet létrehozni vázlatból. A vázlatelemek vagy több felület metszése egy vázlatban nem engedélyezett a zseb felületté alakításához. - + Thread type out of range A menet típusa tartományon kívül esik - + Thread size out of range A menet méret tartományon kívül esik - + Error: Thread could not be built Hiba: A menet nem hozható létre @@ -5403,63 +5393,58 @@ A vázlatelemek vagy többszörös felületek metszése egy vázlatban nem enged - The radii for cones must not be equal - A kúpok sugarai nem lehetnek egyenlők - - - Height of cone too small A kúp magassága túl kicsi - - + + Radius of ellipsoid too small Az ellipszoid sugara túl kicsi - - + + Radius of torus too small Az tórusz sugara túl kicsi - + Polygon of prism is invalid, must have 3 or more sides A prizma sokszöge érvénytelen, 3 vagy több oldallal kell rendelkeznie - + Circumradius of the polygon, of the prism, is too small A prizma sokszög kerülete túl kicsi - + Height of prism is too small A prizma magassága túl kicsi - + delta x of wedge too small delta X ék túl kicsi - + delta y of wedge too small delta Y ék túl kicsi - + delta z of wedge too small delta Z ék túl kicsi - + delta z2 of wedge is negative az ék delta z2 negatív - + delta x2 of wedge is negative az ék delta x2 negatív @@ -5514,7 +5499,7 @@ A vázlatelemek vagy többszörös felületek metszése egy vázlatban nem enged Active body - Active body + Aktív test diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts index d7fceaff08..5a49c47326 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Create Clone - + Make copy Buat salinan @@ -909,8 +909,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Add a Body @@ -1456,39 +1456,29 @@ Jika nol, sama dengan Radius2 Parameter primitif - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min harus tidak sama dengan X max! - + Y min must not be equal to Y max! Y min harus tidak sama dengan Y max! - + Z min must not be equal to Z max! Z min harus tidak sama dengan Z max! - + Create primitive Buat primitif @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Attachment @@ -3384,17 +3374,17 @@ klik lagi untuk mengakhiri seleksi Pilih satu fitur dari daftar - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3469,28 +3459,28 @@ klik lagi untuk mengakhiri seleksi Silakan membuat pesawat terlebih dahulu atau pilih muka untuk membuat sketsa - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3734,12 +3724,12 @@ Hal ini dapat menyebabkan hasil yang tidak diharapkan. Awal tubuh - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Hal ini dapat menyebabkan hasil yang tidak diharapkan. Tidak mungkin membuat fitur subtraktif tanpa fitur dasar yang tersedia - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3819,10 +3809,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Untuk menggunakan fitur ini, perlu disertakan bagian objek dalam dokumen. - - + + Edit %1 Edit %1 @@ -4783,17 +4773,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4808,22 +4798,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4886,8 +4876,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4898,14 +4888,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4915,14 +4905,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4977,10 +4967,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5082,32 +5072,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5411,63 +5401,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 4a95c70702..d0935993cb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -883,8 +883,8 @@ in modo da evitare l'intersezione automatica. Crea clone - + Make copy Fà una copia @@ -909,8 +909,8 @@ in modo da evitare l'intersezione automatica. Crea pallinatura - + Add a Body Aggiungi corpo @@ -1456,39 +1456,29 @@ Se zero, è uguale a Raggio2 Parametri delle primitive - - Cone radii are equal - I raggi del cono sono uguali - - - - The radii for cones must not be equal! - I raggi per i coni non devono essere uguali! - - - - - + + + Invalid wedge parameters Parametri cuneo non validi - + X min must not be equal to X max! X min non deve essere uguale a X max! - + Y min must not be equal to Y max! Y min non deve essere uguale a Y max! - + Z min must not be equal to Z max! Z min non deve essere uguale a Z max! - + Create primitive Crea primitiva @@ -2365,7 +2355,7 @@ fare nuovamente clic per terminare la selezione Dimension - Quota + Dimensione @@ -2835,7 +2825,7 @@ misurata lungo la direzione specificata PartDesignGui::TaskPrimitiveParameters - + Attachment Associazione @@ -3384,17 +3374,17 @@ fare nuovamente clic per terminare la selezione Seleziona una funzione dall'elenco - + Move tip Sposta la cima verso l'alto - + The moved feature appears after the currently set tip. La funzione spostata appare dopo il suggerimento attualmente impostato. - + Do you want the last feature to be the new tip? Vuoi che l'ultima funzione sia il nuovo suggerimento? @@ -3469,28 +3459,28 @@ fare nuovamente clic per terminare la selezione Si prega di creare prima un piano oppure di selezionare una faccia su cui posizionare lo schizzo - - - + + + + + - - A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - - - + + + + + - - Do you want to close this dialog? Si desidera chiudere questa finestra? @@ -3730,12 +3720,12 @@ This may lead to unexpected results. Inizio del corpo - + Dependency violation Violazione dell'albero di dipendenza - + Early feature must not depend on later feature. @@ -3752,14 +3742,14 @@ This may lead to unexpected results. Non è possibile creare una funzione sottrattiva senza una funzione di base disponibile - + Vertical sketch axis Asse verticale dello schizzo - + Horizontal sketch axis Asse orizzontale dello schizzo @@ -3811,10 +3801,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Per poter utilizzare questa funzione essa deve appartenere a un oggetto parte del documento. - - + + Edit %1 Edita %1 @@ -4773,17 +4763,17 @@ over 90: larger hole radius at the bottom Fusione di strumenti fallita - - - - + + + + + + - - Resulting shape is not a solid La forma risultante non è un solido @@ -4798,22 +4788,22 @@ over 90: larger hole radius at the bottom Operazione comune fallita - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Il risultato ha più solidi: attualmente non è supportato. @@ -4876,8 +4866,8 @@ over 90: larger hole radius at the bottom Angolo di scanalatura troppo piccolo - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4888,14 +4878,14 @@ over 90: larger hole radius at the bottom - lo schizzo selezionato non appartiene al corpo attivo. - + Creating a face from sketch failed Creazione di una faccia dallo schizzo fallita - + Revolve axis intersects the sketch L'asse di rivoluzione interseca lo schizzo @@ -4905,14 +4895,14 @@ over 90: larger hole radius at the bottom Ritaglio dalla funzione di base fallito - + Could not revolve the sketch! Impossibile fare la rivoluzione dello schizzo! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Impossibile creare la faccia dallo schizzo. @@ -4967,10 +4957,10 @@ L'intersezione delle entità dello schizzo in uno schizzo non è consentita.Errore: impossibile generare - + Error: Result is not a solid Errore: il risultato non è un solido @@ -5072,32 +5062,32 @@ L'intersezione delle entità dello schizzo in uno schizzo non è consentita.Errore: l'aggiunta del filetto non riuscita + - Boolean operation failed Operazione booleana fallita - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Impossibile creare la faccia dallo schizzo. Intersecando entità di schizzo o più facce in uno schizzo non sono consentiti per fare una tasca su una faccia. - + Thread type out of range Tipo di filettatura fuori dall'intervallo - + Thread size out of range Dimensione del filetto fuori dall'intervallo - + Error: Thread could not be built Errore: impossibile costruire il filetto @@ -5401,63 +5391,58 @@ L'intersezione delle entità dello schizzo in uno schizzo non è consentita. - The radii for cones must not be equal - I raggi per i coni non devono essere uguali - - - Height of cone too small Altezza del cono troppo piccola - - + + Radius of ellipsoid too small Raggio di ellissoide troppo piccolo - - + + Radius of torus too small Raggio del toro troppo piccolo - + Polygon of prism is invalid, must have 3 or more sides Il poligono del prisma non è valido, deve avere 3 o più lati - + Circumradius of the polygon, of the prism, is too small Il circolo del poligono, del prisma, è troppo piccolo - + Height of prism is too small L'altezza del prisma è troppo piccola - + delta x of wedge too small delta x del cuneo troppo piccola - + delta y of wedge too small delta y del cuneo troppo piccola - + delta z of wedge too small delta z del cuneo troppo piccola - + delta z2 of wedge is negative il delta z2 del cuneo è negativo - + delta x2 of wedge is negative delta x2 del cuneo è negativo @@ -5512,7 +5497,7 @@ L'intersezione delle entità dello schizzo in uno schizzo non è consentita. Active body - Active body + Corpo attivo diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index 62194daf29..5f1d3f92a0 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -882,8 +882,8 @@ so that self intersection is avoided. クローンを作成 - + Make copy コピーの作成 @@ -908,8 +908,8 @@ so that self intersection is avoided. Bool変数の作成 - + Add a Body ボディーを追加 @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 プリミティブパラメーター - - Cone radii are equal - コーン半径は等しいです - - - - The radii for cones must not be equal! - コーンの半径は同じであってはなりません! - - - - - + + + Invalid wedge parameters 無効なウェッジパラメーターです。 - + X min must not be equal to X max! X minはX maxより小さい必要があります。 - + Y min must not be equal to Y max! Y minはY maxより小さい必要があります。 - + Z min must not be equal to Z max! Z minはZ maxは小さい必要があります。 - + Create primitive プリミティブを作成 @@ -2833,7 +2823,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment アタッチメント @@ -3382,17 +3372,17 @@ click again to end selection リストからフィーチャーを選択 - + Move tip tipを移動 - + The moved feature appears after the currently set tip. 移動したフィーチャは、現在設定されているチップの後に表示されます。 - + Do you want the last feature to be the new tip? 最後のフィーチャを新しいチップにしたいですか？ @@ -3467,28 +3457,28 @@ click again to end selection まず平面を作成するか、またはスケッチを描く面を選択してください。 - - - + + + + + - - A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - - - + + + + + - - Do you want to close this dialog? このダイアログを閉じますか？ @@ -3728,12 +3718,12 @@ This may lead to unexpected results. ボディーの先頭 - + Dependency violation 依存関係の違反 - + Early feature must not depend on later feature. @@ -3752,14 +3742,14 @@ This may lead to unexpected results. 利用可能なベースフィーチャーがない場合、減算フィーチャーは作成できません。 - + Vertical sketch axis 垂直スケッチ軸 - + Horizontal sketch axis 水平スケッチ軸 @@ -3813,10 +3803,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr このフィーチャーを使用するためにはそれがドキュメント内のパーツオブジェクトに属している必要があります。 - - + + Edit %1 %1を編集 @@ -4773,17 +4763,17 @@ over 90: larger hole radius at the bottom 結合ツールが失敗しました。 - - - - + + + + + + - - Resulting shape is not a solid 結果シェイプはソリッドではありません。 @@ -4798,22 +4788,22 @@ over 90: larger hole radius at the bottom 共通部分演算が失敗しました。 - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. 結果に複数のソリッドが含まれています。これは現在サポートされていません。 @@ -4876,8 +4866,8 @@ over 90: larger hole radius at the bottom グルーブの角度が小さすぎます。 - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4887,14 +4877,14 @@ over 90: larger hole radius at the bottom ・ 選択されたスケッチがアクティブなボディーに属していない。 - + Creating a face from sketch failed スケッチから面を作成できませんでした。 - + Revolve axis intersects the sketch 回転押し出しの軸がスケッチと交差しています。 @@ -4904,14 +4894,14 @@ over 90: larger hole radius at the bottom ベースフィーチャーの切り抜きに失敗しました。 - + Could not revolve the sketch! スケッチを回転押し出しできませんでした! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. スケッチから面を作成できませんでした。 @@ -4966,10 +4956,10 @@ Intersecting sketch entities in a sketch are not allowed. エラー: 作成できませんでした。 - + Error: Result is not a solid エラー: 結果はソリッドではありません。 @@ -5071,32 +5061,32 @@ Intersecting sketch entities in a sketch are not allowed. エラー: ねじ山の追加に失敗しました。 + - Boolean operation failed ブーリアン演算が失敗しました。 - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. スケッチから面を作成できませんでした。 スケッチ内の交差するスケッチ図形や複数面では、面までのポケットは作れません。 - + Thread type out of range ねじ山の種類が範囲外 - + Thread size out of range ねじ山のサイズが範囲外 - + Error: Thread could not be built エラー: ねじ山を作成できませんでした。 @@ -5400,63 +5390,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - 円錐の半径は異なる値でなければなりません - - - Height of cone too small 円錐の高さが小さすぎます - - + + Radius of ellipsoid too small 楕円体の半径が小さすぎます - - + + Radius of torus too small トーラスの半径が小さすぎます - + Polygon of prism is invalid, must have 3 or more sides 角柱を作る多角形は3つ以上の辺を持たなければならず、正しくありません。 - + Circumradius of the polygon, of the prism, is too small 角柱を作る多角形の外接円が小さすぎます。 - + Height of prism is too small 角柱の高さが小さすぎます。 - + delta x of wedge too small ウェッジのΔxが小さすぎます。 - + delta y of wedge too small ウェッジのΔyが小さすぎます。 - + delta z of wedge too small ウェッジのΔzが小さすぎます。 - + delta z2 of wedge is negative ウェッジのΔz2が小さすぎます。 - + delta x2 of wedge is negative ウェッジのΔx2が小さすぎます。 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts index b71f060423..ec86773887 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts @@ -148,7 +148,7 @@ so that self intersection is avoided. PartDesign - ნაწილისდიზაინი + ნაწილის დაპროექტება @@ -810,7 +810,7 @@ so that self intersection is avoided. PartDesign - ნაწილის დაპროექტება + ნაწილისდიზაინი @@ -882,8 +882,8 @@ so that self intersection is avoided. ასლის შექმნა - + Make copy ასლის გადაღება @@ -908,8 +908,8 @@ so that self intersection is avoided. ბულევის შექმნა - + Add a Body სხეულის დამატება @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 პრიმიტივის პარამეტრები - - Cone radii are equal - კონუსების რადიუსები ტოლია - - - - The radii for cones must not be equal! - კონუსების რადიუსები არ უნდა ემთხვეოდეს! - - - - - + + + Invalid wedge parameters სოლის არასწორი პარამეტრები - + X min must not be equal to X max! მინ. X არ უნდა ემთხვეოდეს მაქს. X-ს! - + Y min must not be equal to Y max! მინ. Y არ უნდა ემთხვეოდეს მაქს. Y-ს! - + Z min must not be equal to Z max! მინ. Z არ უნდა ემთხვეოდეს მაქს. Z-ს! - + Create primitive პრიმიტივის შექმნა @@ -1610,7 +1600,7 @@ click again to end selection Input error - Input error + შეყვანის შეცდომა @@ -1770,7 +1760,7 @@ click again to end selection Valid - ჭეშმარიტი + სწორი @@ -1865,7 +1855,7 @@ click again to end selection Valid - სწორი + ჭეშმარიტი @@ -1912,7 +1902,7 @@ click again to end selection Select reference... - Select reference... + აირჩიეთ მიმართვა... @@ -1942,7 +1932,7 @@ click again to end selection Pitch: - ხმის სიმაღლე: + ტანგაჟი: @@ -2172,7 +2162,7 @@ click again to end selection List can be reordered by dragging - სიის გადალაგება შეგიძლიათ გადათრევით + სიის გადალაგება გადათრევით შეგიძლიათ @@ -2200,7 +2190,7 @@ click again to end selection Remove feature - თვისების მოცილება + თვისების წაშლა @@ -2475,7 +2465,7 @@ measured along the specified direction Reversed - Reversed + შებრუნებულია @@ -2659,7 +2649,7 @@ measured along the specified direction Input error - შეყვანის შეცდომა + Input error @@ -2745,7 +2735,7 @@ measured along the specified direction Up to face - ზედაპირამდე + სიბრტყემდე @@ -2768,7 +2758,7 @@ measured along the specified direction List can be reordered by dragging - სიის გადალაგება გადათრევით შეგიძლიათ + სიის გადალაგება შეგიძლიათ გადათრევით @@ -2808,7 +2798,7 @@ measured along the specified direction Occurrences - მოვლენები + გამოვლენები @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment დანართი @@ -2850,7 +2840,7 @@ measured along the specified direction Dimension - განზომილება + ზომა @@ -2878,12 +2868,12 @@ measured along the specified direction Horizontal sketch axis - Horizontal sketch axis + თარაზული ესკიზის ღერძი Vertical sketch axis - Vertical sketch axis + შვეული ესკიზის ღერძი @@ -2916,7 +2906,7 @@ measured along the specified direction Face - სიბრტყე + ზედაპირი @@ -2969,7 +2959,7 @@ measured along the specified direction Remove feature - თვისების წაშლა + თვისების მოცილება @@ -2979,12 +2969,12 @@ measured along the specified direction Occurrences - გამოვლენები + მოვლენები OK - დიახ + &დიახ @@ -3022,7 +3012,7 @@ measured along the specified direction Remove - წაშლა + მოცილება @@ -3030,7 +3020,7 @@ measured along the specified direction Face - ზედაპირი + სიბრტყე @@ -3137,7 +3127,7 @@ click again to end selection Construction line %1 - დამხმარე ხაზი %1 + კონსტრუქციის ხაზი %1 @@ -3158,7 +3148,7 @@ click again to end selection Select reference... - აირჩიეთ მიმართვა... + Select reference... @@ -3383,17 +3373,17 @@ click again to end selection აირჩიეთ თვისება სიიდან - + Move tip ბურღის ღეროს გამოძრავება - + The moved feature appears after the currently set tip. გადატანილი თვისება ამჟამად დაყენებული ბუნიკის შემდეგ აღმოჩნდება. - + Do you want the last feature to be the new tip? გნებავთ ბოლო ელემენტი ახალი ბუნიკი იყოს? @@ -3468,28 +3458,28 @@ click again to end selection ჯერ საჭიროა სიბრტყის შექმნა ან სახაზავი ზედაპირის არჩევა - - - + + + + + - - A dialog is already open in the task panel ფანჯარა უკვე ღიაა ამოცანების პანელზე - - - + + + + + - - Do you want to close this dialog? ნამდვილად გსურთ ამ ფანჯრის დახურვა? @@ -3733,12 +3723,12 @@ This may lead to unexpected results. სხეულის დასაწყისი - + Dependency violation დამოკიდებულების დარღვევა - + Early feature must not depend on later feature. @@ -3757,21 +3747,21 @@ This may lead to unexpected results. საბაზისო ელემემენტის გარეშე გამოკლებადი თვისების შექმნა შეუძლებელია - + Vertical sketch axis - შვეული ესკიზის ღერძი + Vertical sketch axis - + Horizontal sketch axis - თარაზული ესკიზის ღერძი + Horizontal sketch axis Construction line %1 - კონსტრუქციის ხაზი %1 + დამხმარე ხაზი %1 @@ -3818,10 +3808,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr ამ თვისების გამოსაყენებლად ის დოკუმენტში ნაწლის ობიექტს უნდა ეკუთვნოდეს. - - + + Edit %1 ჩასწორება %1 @@ -3839,7 +3829,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr Plane - ზედაპირი + სიბრტყე @@ -4319,7 +4309,7 @@ Only available for holes without thread Standard - სტანდარტული + ჩვეულებრივი @@ -4481,7 +4471,7 @@ over 90: larger hole radius at the bottom Reversed - შებრუნებულია + Reversed @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom ხელსაწყოების შერწყმის შეცდომა - - - - + + + + + + - - Resulting shape is not a solid მიღებული მონახაზი მყარი სხეული არაა @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom საერთო ოპერაციის შეცდომა - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. შედეგს ერთზე მეტი მყარი სხეული გააჩნია: ეს ამჟამად მხარდაჭერილი არაა. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom კილოს კუთხე მეტისმეტად მცირეა - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - არჩეული ესკიზი არ ეკუთვნის აქტიურ სხეულს. - + Creating a face from sketch failed ესკიზიდან ზედაპირის შექმნა შეუძლებელია - + Revolve axis intersects the sketch ბრუნვის ღერძი ესკიზს კვეთს @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom საბაზისო თვისებიდან ამოჭრის შეცდომა - + Could not revolve the sketch! ესკიზის მოტრიალება შეუძლებელია! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. ესკიზიდან ზედაპირის შექმნის შეცდომა. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. შეცდომა: აგება შეუძლებელია - + Error: Result is not a solid შეცდომა: შედეგი მყარი სხეული არაა @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. შეცდომა: კუთხვილის დამატების შეცდომა + - Boolean operation failed ლოგიკური ოპერაციის შეცდომა - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. ესკიზიდან ზედაპირის შექმნის შეცდომა. ესკიზში თანაკვეთადი ესკიზის ობიექტები ან ერთზე მეტი ზედაპირები ჯიბის ზედაპირამდე გაწელვისთვის დაშვებული არაა. - + Thread type out of range კუთხვილის ტიპი დიაპაზონს გარეთაა - + Thread size out of range კუთხვილის ზომა დიაპაზონს გარეთაა - + Error: Thread could not be built შეცდომა: კუთხვილის აგება შეუძლებელია @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - კონუსების რადიუსები არ უნდა ემთხვეოდეს - - - Height of cone too small კონუსის სიმაღლე მეტისმეტად მცირეა - - + + Radius of ellipsoid too small ოვალოიდის რადიუსი ძალიან მცირეა - - + + Radius of torus too small ტორსის რადიუსი მეტისმეტად მცირეა - + Polygon of prism is invalid, must have 3 or more sides პრიზმის პოლიგონი არასწორია. უნდა ჰქონდეს 3 ან მეტი მხარე - + Circumradius of the polygon, of the prism, is too small პრიზმის პოლიგონის შემომსაზღვრელი წრეწირის რადიუსი მეტისმეტად მცირეა - + Height of prism is too small პრიზმის სიმაღლე მეტისმეტად მცირეა - + delta x of wedge too small სოლის დელტა X ძალინ მცირეა - + delta y of wedge too small სოლის დელტა Y ძალინ მცირეა - + delta z of wedge too small სოლის დელტა Z ძალინ მცირეა - + delta z2 of wedge is negative სოლის დელტა Z2 უარყოფითია - + delta x2 of wedge is negative სოლის დელტა X2 უარყოფითია @@ -5521,7 +5506,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Active body - Active body + აქტიური სხეული diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts index ad4d051a77..0fe2719d84 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts @@ -882,8 +882,8 @@ so that self intersection is avoided. Clone 생성 - + Make copy 사본 만들기 @@ -908,8 +908,8 @@ so that self intersection is avoided. 부울 생성 - + Add a Body 바디 추가 @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 기본 형상 매개 변수 - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive 생성: 기본 형상 @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment 부착 @@ -3383,17 +3373,17 @@ click again to end selection 리스트에서 피처(Feature) 선택 - + Move tip 팁 이동 - + The moved feature appears after the currently set tip. 이동된 피처는 현재 설정된 팁 뒤에 나타납니다. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3468,28 +3458,28 @@ click again to end selection 평면을 먼저 생성하거나 스케치를 생성할 면을 먼저 선택하세요. - - - + + + + + - - A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. - - - + + + + + - - Do you want to close this dialog? 다이얼로그를 닫으시겠습니까? @@ -3733,12 +3723,12 @@ This may lead to unexpected results. 바디(Body)의 시작 - + Dependency violation 종속성 위반 - + Early feature must not depend on later feature. @@ -3757,14 +3747,14 @@ This may lead to unexpected results. 기본 피처없이 빼기(Subtractive) 피처를 생성할 수 없습니다. - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3818,10 +3808,10 @@ Body가 없는 PartDesign 개체가 있는 레거시 문서가 있는 경우 Par 이 피처를 사용하기 위해서는, 피처가 현재 문서에 있는 파트 객체에 속해야 합니다. - - + + Edit %1 Edit %1 @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - 선택한 스케치는 활성 바디에 속하지 않습니다. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 72c49e2889..6c24f8c4f8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Maak een kloon - + Make copy Maak een kopie @@ -909,8 +909,8 @@ so that self intersection is avoided. Maak Boolean - + Add a Body Voeg lichaam toe @@ -1454,39 +1454,29 @@ Indien nul, is deze gelijk aan Radius2 Basisvorm parameters - - Cone radii are equal - Kegelstralen zijn gelijk - - - - The radii for cones must not be equal! - De stralen van kegels mogen niet gelijk zijn! - - - - - + + + Invalid wedge parameters Ongeldige wig parameters - + X min must not be equal to X max! X min mag niet gelijk zijn aan X max! - + Y min must not be equal to Y max! Y min mag niet gelijk zijn aan Y max! - + Z min must not be equal to Z max! Z min mag niet gelijk zijn aan Z max! - + Create primitive Basisvorm maken @@ -2833,7 +2823,7 @@ gemeten in de opgegeven richting PartDesignGui::TaskPrimitiveParameters - + Attachment Bijlage @@ -3382,17 +3372,17 @@ klik nogmaals om de selectie te beëindigen Selecteer een functie van de lijst - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3467,28 +3457,28 @@ klik nogmaals om de selectie te beëindigen Maak eerst een werk-vlak of selecteer een zijde om op te schetsen - - - + + + + + - - A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - - - + + + + + - - Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? @@ -3732,12 +3722,12 @@ Dit kan tot onverwachte resultaten leiden. Begin van het lichaam - + Dependency violation Inbreuk op afhankelijkheden - + Early feature must not depend on later feature. @@ -3756,14 +3746,14 @@ Dit kan tot onverwachte resultaten leiden. Het is niet mogelijk om een aftrekkende functie maken zonder dat een basis functie beschikbaar is - + Vertical sketch axis Verticale schetsas - + Horizontal sketch axis Horizontale schetsas @@ -3817,10 +3807,10 @@ Als u een ouder document met PartDesign objecten zonder een lichaam hebt, gebrui Om deze functie te gebruiken moet deze tot een onderdeel object behoren in het document. - - + + Edit %1 Bewerken %1 @@ -4781,17 +4771,17 @@ boven de 90: groter gat straal aan de onderkant Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4806,22 +4796,22 @@ boven de 90: groter gat straal aan de onderkant Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4884,8 +4874,8 @@ boven de 90: groter gat straal aan de onderkant Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4896,14 +4886,14 @@ boven de 90: groter gat straal aan de onderkant - de geselecteerde schets behoort niet tot de actieve lichaam. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4913,14 +4903,14 @@ boven de 90: groter gat straal aan de onderkant Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4975,10 +4965,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5080,32 +5070,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5409,63 +5399,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - De stralen van kegels mogen niet gelijk zijn - - - Height of cone too small Hoogte van kegel te klein - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Hoogte van het prisma is te klein - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index feea8c2458..2743998d16 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -169,7 +169,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt Części + Projekt części @@ -259,7 +259,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt części + Projekt Części @@ -277,7 +277,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Part Design + Projekt części @@ -295,7 +295,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt Części + Part Design @@ -331,7 +331,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Part Design + Projekt Części @@ -349,7 +349,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt Części + Part Design @@ -655,7 +655,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Part Design + Projekt Części @@ -673,7 +673,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt Części + Part Design @@ -813,7 +813,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt części + Projekt Części @@ -885,8 +885,8 @@ wartość Fałsz = uzębienie wewnętrzne Utwórz klona - + Make copy Utwórz kopię @@ -911,8 +911,8 @@ wartość Fałsz = uzębienie wewnętrzne Utwórz cechę funkcją logiczną - + Add a Body Dodaj zawartość @@ -1456,39 +1456,29 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Parametry bryły pierwotnej - - Cone radii are equal - Promienie stożków są równe - - - - The radii for cones must not be equal! - Promienie stożków nie mogą być równe! - - - - - + + + Invalid wedge parameters Nieprawidłowe parametry klina - + X min must not be equal to X max! Wartość minimalna X nie może być równa wartości maksymalnej X! - + Y min must not be equal to Y max! Wartość minimalna Y nie może być równa wartości maksymalnej Y! - + Z min must not be equal to Z max! Wartość minimalna Z nie może być równa wartości maksymalnej Z! - + Create primitive Utwórz bryłę pierwotną @@ -1620,7 +1610,7 @@ kliknij ponownie, aby zakończyć wybór Click button to enter selection mode, click again to end selection - Kliknij w przycisk, aby przejść do trybu wyboru, + Kliknij, aby przejść do trybu wyboru, kliknij ponownie, aby zakończyć wybór @@ -1943,7 +1933,7 @@ kliknij ponownie, aby zakończyć wybór Pitch: - Odstęp: + Skok: @@ -2476,7 +2466,7 @@ mierzona wzdłuż podanego kierunku Reversed - Odwrócony + Odwrotny @@ -2835,7 +2825,7 @@ mierzona wzdłuż podanego kierunku PartDesignGui::TaskPrimitiveParameters - + Attachment Dołączenie @@ -2905,7 +2895,7 @@ mierzona wzdłuż podanego kierunku Reversed - Odwrotny + Odwrócony @@ -2917,7 +2907,7 @@ mierzona wzdłuż podanego kierunku Face - Powierzchnia + Ściana @@ -3031,7 +3021,7 @@ mierzona wzdłuż podanego kierunku Face - Ściana + Powierzchnia @@ -3040,13 +3030,13 @@ mierzona wzdłuż podanego kierunku Click button to enter selection mode, click again to end selection - Kliknij, aby przejść do trybu wyboru, + Kliknij w przycisk, aby przejść do trybu wyboru, kliknij ponownie, aby zakończyć wybór Select - Dodaj + Wybierz @@ -3384,17 +3374,17 @@ kliknij ponownie, aby zakończyć wybór Wybierz cechę z listy - + Move tip Przenieś czubek - + The moved feature appears after the currently set tip. Przeniesiony element pojawia się za aktualnie ustawionym czubkiem. - + Do you want the last feature to be the new tip? Czy chcesz aby ostatnia cecha była nowym czubkiem? @@ -3469,28 +3459,28 @@ kliknij ponownie, aby zakończyć wybór Proszę stworzyć najpierw płaszczyznę lub wybrać ścianę dla umieszczenia szkicu - - - + + + + + - - A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - - - + + + + + - - Do you want to close this dialog? Czy chcesz zamknąć to okno? @@ -3734,12 +3724,12 @@ Może to prowadzić do nieoczekiwanych rezultatów. Początek zawartości - + Dependency violation Naruszenie warunków zależności - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Może to prowadzić do nieoczekiwanych rezultatów. Nie jest możliwe utworzenie elementu do odjęcia bez dostępnego elementu bazowego - + Vertical sketch axis Pionowa oś szkicu - + Horizontal sketch axis Pozioma oś szkicu @@ -3819,10 +3809,10 @@ Jeśli masz starszy dokument z obiektami środowiska pracy Projekt Części bez Ta cecha musi przynależeć do obiektu części w danym dokumencie, by można ją było wykorzystać. - - + + Edit %1 Edytuj %1 @@ -4320,7 +4310,7 @@ Dostępne tylko dla otworów bez gwintu Standard - Standardowe + Standardowy @@ -4783,17 +4773,17 @@ powyżej 90°: większy promień otworu u dołu Połączenie narzędzi nie powiodło się - - - - + + + + + + - - Resulting shape is not a solid Otrzymany kształt nie jest bryłą @@ -4808,22 +4798,22 @@ powyżej 90°: większy promień otworu u dołu Operacja części wspólnej nie powiodła się - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Wynik ma wiele brył: to nie jest obecnie wspierane. @@ -4886,8 +4876,8 @@ powyżej 90°: większy promień otworu u dołu Kąt rowka zbyt mały - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4898,14 +4888,14 @@ powyżej 90°: większy promień otworu u dołu - wybrany szkic nie należy do aktywnej zawartości. - + Creating a face from sketch failed Tworzenie ściany ze szkicu nie powiodło się - + Revolve axis intersects the sketch Oś obrotu przecina szkic @@ -4915,14 +4905,14 @@ powyżej 90°: większy promień otworu u dołu Wycięcie cechy podstawowej nie powiodło się - + Could not revolve the sketch! Nie można obrócić szkicu! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nie można utworzyć ściany ze szkicu. @@ -4977,10 +4967,10 @@ Przecinające się obiekty w szkicu są niedozwolone. Błąd: nie udało się zbudować - + Error: Result is not a solid Błąd: wynik nie jest bryłą @@ -5082,32 +5072,32 @@ Przecinające się obiekty w szkicu są niedozwolone. Błąd: Dodanie gwintu nie powiodło się + - Boolean operation failed Operacja logiczna nie powiodła się - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nie można utworzyć ściany ze szkicu. Przecinające się elementy szkicu lub wiele ścian w szkicu nie są dozwolone przy tworzeniu kieszeni aż do powierzchni. - + Thread type out of range Typ gwintu poza zakresem - + Thread size out of range Rozmiar gwintu poza zakresem - + Error: Thread could not be built Błąd: Nie można zbudować gwintu @@ -5411,63 +5401,58 @@ Przecinające się elementy szkicu lub wiele ścian w szkicu nie są dozwolone.< - The radii for cones must not be equal - Promienie stożków nie mogą być równe - - - Height of cone too small Wysokość stożka zbyt mała - - + + Radius of ellipsoid too small Promień elipsoidy zbyt mały - - + + Radius of torus too small Promień torusa zbyt mały - + Polygon of prism is invalid, must have 3 or more sides Wielokąt graniastosłupa jest nieprawidłowa, musi mieć 3 lub więcej boków - + Circumradius of the polygon, of the prism, is too small Promień opisany wielokąta graniastosłupa jest zbyt mały - + Height of prism is too small Wysokość graniastosłupa jest zbyt mała - + delta x of wedge too small delta x klina zbyt mała - + delta y of wedge too small delta y klina zbyt mała - + delta z of wedge too small delta z klina zbyt mała - + delta z2 of wedge is negative delta z2 klina jest ujemna - + delta x2 of wedge is negative delta x2 klina jest ujemna @@ -5522,7 +5507,7 @@ Przecinające się elementy szkicu lub wiele ścian w szkicu nie są dozwolone.< Active body - Active body + Aktywuj Zawartość diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index 5deaa27e5a..f1cfcd2c5c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Criar Clone - + Make copy Fazer cópia @@ -909,8 +909,8 @@ so that self intersection is avoided. Criar Booleano - + Add a Body Adicionar um corpo @@ -1454,39 +1454,29 @@ Se for zero, é igual ao Raio2 Parâmetros primitivos - - Cone radii are equal - Os raios do cone são iguais - - - - The radii for cones must not be equal! - Os raios para os cones não podem ser iguais! - - - - - + + + Invalid wedge parameters Parâmetros de cunha inválidos - + X min must not be equal to X max! X min não pode ser igual a X max! - + Y min must not be equal to Y max! Y min não pode ser igual a Y max! - + Z min must not be equal to Z max! Z min não pode ser igual a Z max! - + Create primitive Criar primitiva @@ -2833,7 +2823,7 @@ medido ao longo da direção especificada PartDesignGui::TaskPrimitiveParameters - + Attachment Fixação @@ -3382,17 +3372,17 @@ clique novamente para terminar a seleção Selecione um objeto da lista - + Move tip Mover ponta - + The moved feature appears after the currently set tip. O recurso movido aparece após a ponta definida. - + Do you want the last feature to be the new tip? Você quer que o último recurso seja a nova ponta? @@ -3467,28 +3457,28 @@ clique novamente para terminar a seleção Por favor, crie um plano primeiro ou selecione uma face onde desenhar - - - + + + + + - - A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - - - + + + + + - - Do you want to close this dialog? Deseja fechar este diálogo? @@ -3728,12 +3718,12 @@ This may lead to unexpected results. Início do corpo - + Dependency violation Violação de dependência - + Early feature must not depend on later feature. @@ -3752,14 +3742,14 @@ This may lead to unexpected results. Não é possível criar um objeto subtrativo sem um objeto base disponível - + Vertical sketch axis Eixo vertical do esboço - + Horizontal sketch axis Eixo horizontal do esboço @@ -3813,10 +3803,10 @@ Se você tiver um documento antigo com objetos do PartDesign sem corpo, use a fu Para utilizar este objeto ele precisa pertencer a uma peça do documento. - - + + Edit %1 Editar %1 @@ -4776,17 +4766,17 @@ acima de 90: raio maior do furo na parte inferior Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4801,22 +4791,22 @@ acima de 90: raio maior do furo na parte inferior Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4879,8 +4869,8 @@ acima de 90: raio maior do furo na parte inferior Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4890,14 +4880,14 @@ acima de 90: raio maior do furo na parte inferior - O esboço selecionado não pertence ao corpo ativo. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4907,14 +4897,14 @@ acima de 90: raio maior do furo na parte inferior Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4969,10 +4959,10 @@ Intersecting sketch entities in a sketch are not allowed. Erro: Não foi possível construir - + Error: Result is not a solid Erro: O resultado não é um sólido @@ -5074,32 +5064,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Operação booleana falhou - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5403,63 +5393,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts index 08697a10fd..b2c5945f40 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Create Clone - + Make copy Make copy @@ -909,8 +909,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Add a Body @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Parâmetros das primitivas - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min não pode ser igual a X max! - + Y min must not be equal to Y max! Y min não deve ser igual a Y max! - + Z min must not be equal to Z max! Z min não deve ser igual a Z max! - + Create primitive Criar primitiva @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment fixação @@ -3384,17 +3374,17 @@ clique novamente para terminar a seleção Selecione um recurso da lista - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3469,28 +3459,28 @@ clique novamente para terminar a seleção Por favor, crie um plano primeiro ou selecione uma face onde desenhar - - - + + + + + - - A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - - - + + + + + - - Do you want to close this dialog? Deseja fechar esta janela? @@ -3730,12 +3720,12 @@ This may lead to unexpected results. Início do corpo - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3754,14 +3744,14 @@ This may lead to unexpected results. Não é possível criar um objeto subtrativo sem um objeto base disponível - + Vertical sketch axis Eixo vertical de esboço - + Horizontal sketch axis Eixo horizontal de esboço @@ -3813,10 +3803,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Para utilizar este objeto ele precisa de pertencer a uma peça do documento. - - + + Edit %1 Edite %1 @@ -4776,17 +4766,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4801,22 +4791,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4879,8 +4869,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4891,14 +4881,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4908,14 +4898,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4970,10 +4960,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5075,32 +5065,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5404,63 +5394,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 2f34936fff..6d5018a98a 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -885,8 +885,8 @@ Creati noi coordonate in sistemul local Creare clonă - + Make copy Fă o copie @@ -911,8 +911,8 @@ Creati noi coordonate in sistemul local Create Boolean - + Add a Body Adaugă un corp @@ -1458,39 +1458,29 @@ Dacă zero, este egală cu Radius2 Parametrii primitivei - - Cone radii are equal - Raza Cone egală - - - - The radii for cones must not be equal! - Raza pentru conuri nu trebuie să fie egală! - - - - - + + + Invalid wedge parameters Parametri de perete invalizi - + X min must not be equal to X max! X min nu trebuie să fie egal cu X max! - + Y min must not be equal to Y max! Y min nu trebuie să fie egal cu Y max! - + Z min must not be equal to Z max! Z min nu trebuie să fie egal cu Z max! - + Create primitive Creează o primitivă @@ -1915,7 +1905,7 @@ faceți clic din nou pentru a încheia selecția Select reference... - Select reference... + Selectați o referință... @@ -2837,7 +2827,7 @@ măsurată de-a lungul direcției specificate PartDesignGui::TaskPrimitiveParameters - + Attachment Ataşament @@ -3160,7 +3150,7 @@ faceți clic din nou pentru a încheia selecția Select reference... - Selectați o referință... + Select reference... @@ -3385,17 +3375,17 @@ faceți clic din nou pentru a încheia selecția Selectaţi o funcție din lista - + Move tip Mutați vârful - + The moved feature appears after the currently set tip. Funcția mutată apare după sfatul setat în prezent. - + Do you want the last feature to be the new tip? Doriți ca ultima caracteristică să fie noul sfaturi? @@ -3470,28 +3460,28 @@ faceți clic din nou pentru a încheia selecția Vă rugăm să creaţi mai întâi un plan, sau selectează o faţă pe care se aplică schiţa - - - + + + + + - - A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - - - + + + + + - - Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? @@ -3731,12 +3721,12 @@ This may lead to unexpected results. Începutul corpului - + Dependency violation Încălcarea dependenței - + Early feature must not depend on later feature. @@ -3755,14 +3745,14 @@ This may lead to unexpected results. Nu este posibil să se creeze o funcție substractivă fără prezența unei funcții de bază - + Vertical sketch axis Axa verticală a schiţei - + Horizontal sketch axis Axa orizontală a schiţei @@ -3814,10 +3804,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Pentru a utiliza această funcție, ea trebuie să aparțină unei piese din document. - - + + Edit %1 Editare %1 @@ -4777,17 +4767,17 @@ peste 90: rază mai mare la partea de jos Fuziunea uneltelor a eșuat - - - - + + + + + + - - Resulting shape is not a solid Forma rezultată nu este solidă @@ -4802,22 +4792,22 @@ peste 90: rază mai mare la partea de jos Operație comună eșuată - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Rezultatul are mai multe solide: acest lucru nu este suportat în prezent. @@ -4880,8 +4870,8 @@ peste 90: rază mai mare la partea de jos Unghiul de canelă prea mic - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4892,14 +4882,14 @@ peste 90: rază mai mare la partea de jos - schița selectată nu aparține Organismului activ. - + Creating a face from sketch failed Crearea unei fațete din schiță a eșuat - + Revolve axis intersects the sketch Axa Revolve intersectează schița @@ -4909,14 +4899,14 @@ peste 90: rază mai mare la partea de jos Nu s-a reușit decuparea funcției de bază - + Could not revolve the sketch! Nu s-a putut revolta schița! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nu s-a putut crea fața din schiță. @@ -4971,10 +4961,10 @@ Entitățile de schiță intersectate dintr-o schiță nu sunt permise.Eroare: Nu s-a putut construi - + Error: Result is not a solid Eroare: Rezultatul nu este solid @@ -5076,32 +5066,32 @@ Entitățile de schiță intersectate dintr-o schiță nu sunt permise.Eroare: Adăugarea temei de discuţie a eşuat + - Boolean operation failed Operația Booleană a eșuat - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nu s-a putut crea fața din schiță. Elementele de intersectare ale schiței sau multiplele fețe dintr-o schiță nu sunt permise pentru a face un buzunar până la o față. - + Thread type out of range Tipul de subiect din afara intervalului - + Thread size out of range Dimensiune discutie in afara intervalului - + Error: Thread could not be built Eroare: discuchar@@0ia nu a putut fi construitchar@@1 @@ -5405,63 +5395,58 @@ Nu sunt permise entități intersectate de schiță sau multiple fețe dintr-o s - The radii for cones must not be equal - Raza pentru conuri nu trebuie să fie egală - - - Height of cone too small Înălțimea conului prea mică - - + + Radius of ellipsoid too small Raza de ellipsoid prea mică - - + + Radius of torus too small Raza prea mică a torței - + Polygon of prism is invalid, must have 3 or more sides Poligonul de prismă nu este valabil, trebuie să aibă 3 sau mai multe feţe - + Circumradius of the polygon, of the prism, is too small Circumrazul poligonului, prism, este prea mic - + Height of prism is too small Înălțimea prismei este prea mică - + delta x of wedge too small delta x de încheietură prea mică - + delta y of wedge too small delta y wedge prea mică - + delta z of wedge too small delta z wedge prea mică - + delta z2 of wedge is negative delta z2 wedge este negativă - + delta x2 of wedge is negative delta z2 wedge este negativă diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index d2ecd8ed1f..a4a0ace786 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Клонировать - + Make copy Сделать копию @@ -909,8 +909,8 @@ so that self intersection is avoided. Булева операция - + Add a Body Добавить тело @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Параметры примитива - - Cone radii are equal - Радиусы конусов равны - - - - The radii for cones must not be equal! - Радиусы конуса не должны совпадать! - - - - - + + + Invalid wedge parameters Неверные параметры клина - + X min must not be equal to X max! X мин. не должен быть равен X макс.! - + Y min must not be equal to Y max! Y мин. не должен быть равен Y макс.! - + Z min must not be equal to Z max! Z мин. не должен быть равен Z макс.! - + Create primitive Создать примитив @@ -1771,7 +1761,7 @@ click again to end selection Valid - Верно + Действительный @@ -1866,7 +1856,7 @@ click again to end selection Valid - Действительный + Верно @@ -1913,7 +1903,7 @@ click again to end selection Select reference... - Выбрать ориентир... + Выберите ссылку... @@ -2125,7 +2115,7 @@ click again to end selection Update view - Обновить + Обновить вид @@ -2231,7 +2221,7 @@ click again to end selection Error - Ошибки + Ошибка @@ -2474,7 +2464,7 @@ measured along the specified direction Reversed - В обратную сторону + Реверсивный @@ -2744,7 +2734,7 @@ measured along the specified direction Up to face - Поднять до грани + До грани @@ -2807,7 +2797,7 @@ measured along the specified direction Occurrences - События + Вхождений @@ -2833,7 +2823,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Вложение @@ -2978,7 +2968,7 @@ measured along the specified direction Occurrences - Вхождений + События @@ -3021,7 +3011,7 @@ measured along the specified direction Remove - Убрать + Удалить @@ -3157,7 +3147,7 @@ click again to end selection Select reference... - Выберите ссылку... + Выбрать ориентир... @@ -3382,17 +3372,17 @@ click again to end selection Выбрать черту из списка - + Move tip Переместить подсказку - + The moved feature appears after the currently set tip. Перемещенная характеристика появляется после текущей подсказки. - + Do you want the last feature to be the new tip? Вы хотите, чтобы последняя характеристика (параметр) была новой подсказкой? @@ -3414,7 +3404,7 @@ click again to end selection Error - Ошибка + Ошибки @@ -3467,28 +3457,28 @@ click again to end selection Пожалуйста, сначала создайте плоскость или выберите грань - - - + + + + + - - A dialog is already open in the task panel Диалог уже открыт в панели задач - - - + + + + + - - Do you want to close this dialog? Вы хотите закрыть этот диалог? @@ -3732,12 +3722,12 @@ This may lead to unexpected results. Начало тела - + Dependency violation Нарушение зависимостей - + Early feature must not depend on later feature. @@ -3756,14 +3746,14 @@ This may lead to unexpected results. Невозможно создать субтрактивный элемент без базового элемента - + Vertical sketch axis Вертикальная ось эскиза - + Horizontal sketch axis Горизонтальная ось эскиза @@ -3817,10 +3807,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Для того, чтобы использовать этот элемент, он должен являться объектом типа деталь в документе. - - + + Edit %1 Редактировать %1 @@ -4261,7 +4251,7 @@ Note that the calculation can take some time Update view - Обновить вид + Обновить @@ -4315,7 +4305,7 @@ Only available for holes without thread Standard - Стандарт + Стандартно @@ -4477,7 +4467,7 @@ over 90: larger hole radius at the bottom Reversed - Реверсивный + В обратную сторону @@ -4778,17 +4768,17 @@ over 90: larger hole radius at the bottom Сбой слияния инструментов - - - - + + + + + + - - Resulting shape is not a solid Результат не является твердотельным @@ -4803,22 +4793,22 @@ over 90: larger hole radius at the bottom Общая операция не удалась - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Результат состоит из нескольких тел: это в настоящее время это не поддерживается. @@ -4881,8 +4871,8 @@ over 90: larger hole radius at the bottom Угол канавки слишком мал - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4893,14 +4883,14 @@ over 90: larger hole radius at the bottom - выбранный эскиз не принадлежит активному телу. - + Creating a face from sketch failed Не удалось создать грань из эскиза - + Revolve axis intersects the sketch Ось вращения пересекает эскиз @@ -4910,14 +4900,14 @@ over 90: larger hole radius at the bottom Не удалось вырезать базовый элемент - + Could not revolve the sketch! Не удалось повернуть эскиз! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Не удалось создать грань из эскиза. @@ -4972,10 +4962,10 @@ Intersecting sketch entities in a sketch are not allowed. Ошибка: Не удалось собрать - + Error: Result is not a solid Ошибка: Результат не твердотельный @@ -5077,32 +5067,32 @@ Intersecting sketch entities in a sketch are not allowed. Ошибка: не удалось добавить резьбу + - Boolean operation failed Не удалось выполнить булеву операцию - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Не удалось создать грань из эскиза. Создание выреза из эскиза с пересекающимися элементами или множественными контуры в эскизе невозможно. - + Thread type out of range Тип резьбы выходит за пределы допустимого диапазона - + Thread size out of range Размер резьбы выходит за пределы допустимого диапазона - + Error: Thread could not be built Ошибка: резьба не может быть построена @@ -5406,63 +5396,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - Радиусы конусов не должны быть равны - - - Height of cone too small Высота конуса слишком мала - - + + Radius of ellipsoid too small Радиус эллипсоида слишком мал - - + + Radius of torus too small Радиус торса слишком мал - + Polygon of prism is invalid, must have 3 or more sides Многоугольник призмы неправилен, должен иметь 3 или более сторон - + Circumradius of the polygon, of the prism, is too small Радиус окружности многоугольника призмы слишком мал - + Height of prism is too small Высота призмы слишком мала - + delta x of wedge too small дельта x клина слишком мала - + delta y of wedge too small дельта Y клина слишком мала - + delta z of wedge too small дельта z клина слишком мала - + delta z2 of wedge is negative дельта z2 клина отрицательно - + delta x2 of wedge is negative дельта x2 клина отрицательно @@ -5517,7 +5502,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Active body - Active body + Активное тело diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 15f3380d45..38bbc5b6d7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -239,7 +239,7 @@ da se izogne samosečnosti. PartDesign - Oblikovanje delov + Snovalnik delov @@ -257,7 +257,7 @@ da se izogne samosečnosti. PartDesign - Snovalnik delov + Oblikovanje delov @@ -883,8 +883,8 @@ da se izogne samosečnosti. Ustvari dvojnika - + Make copy Naredi kopijo @@ -909,8 +909,8 @@ da se izogne samosečnosti. Ustvari logično vrednost - + Add a Body Dodaj telo @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Določilke osnovnika - - Cone radii are equal - Polmeri stožcev so enaki - - - - The radii for cones must not be equal! - Polmera stožcev ne moreta biti enaka! - - - - - + + + Invalid wedge parameters Neveljavne določilke klina - + X min must not be equal to X max! Najmanjši X ne sme biti enak največjemu X! - + Y min must not be equal to Y max! Najmanjši Y ne sme biti enak največjemu Y! - + Z min must not be equal to Z max! Najmanjši Z ne sme biti enak največjemu Z! - + Create primitive Ustvari osnovnik @@ -1913,7 +1903,7 @@ s ponovnim klikom pa zaključite izbiranje Select reference... - Izberite osnovo … + Izberite sklic ... @@ -2799,7 +2789,7 @@ merjena vzdolž določene smeri Angle - Kót + Kot @@ -2809,12 +2799,12 @@ merjena vzdolž določene smeri Occurrences - Pojavitve + Pogostosti OK - V redu + Potrdi @@ -2835,7 +2825,7 @@ merjena vzdolž določene smeri PartDesignGui::TaskPrimitiveParameters - + Attachment Pripetek @@ -2890,7 +2880,7 @@ merjena vzdolž določene smeri Select reference... - Izberite sklic ... + Izberite osnovo … @@ -2980,7 +2970,7 @@ merjena vzdolž določene smeri Occurrences - Pogostosti + Pojavitve @@ -3384,17 +3374,17 @@ s ponovnim klikom pa zaključite izbiranje Izberi značilnost s seznama - + Move tip Premakni izvajajočo nalogo - + The moved feature appears after the currently set tip. Premaknjena značilnost pride za trenutno izvajajočo nalogo. - + Do you want the last feature to be the new tip? Ali želite, da zadnja značilnost postane nova izvajajoča naloga? @@ -3469,28 +3459,28 @@ s ponovnim klikom pa zaključite izbiranje Ustvarite najprej ravnino ali izberite ploskev, na katero želite očrtavati - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3734,12 +3724,12 @@ To lahko pripelje do nepričakovanih rezultatov. Začetek telesa - + Dependency violation Kršitev odvisnosti - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ To lahko pripelje do nepričakovanih rezultatov. Značilke odvzemanja ni mogoče ustvariti, če osnovna značilnost ni na voljo - + Vertical sketch axis Navpična os skice - + Horizontal sketch axis Vodoravna os skice @@ -3819,10 +3809,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Če želite uporabiti to značilnost, mora pripadati delu v dokumentu. - - + + Edit %1 Uredi %1 @@ -4234,7 +4224,7 @@ Neglede na to je selitev v bodoče z "Snovanje delov -> Preseli" mogoča kada Profile - Presek + Profil @@ -4783,17 +4773,17 @@ nad 90: v spodnjem delu večji premer luknje Spojitev orodij spodletela - - - - + + + + + + - - Resulting shape is not a solid Dobljena oblika ni telo @@ -4808,22 +4798,22 @@ nad 90: v spodnjem delu večji premer luknje Skupno dejanje spodletelo - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Dobljenih je več teles, kar pa trenutno ni podprto. @@ -4886,8 +4876,8 @@ nad 90: v spodnjem delu večji premer luknje Premajhene kot žlebiča - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ nad 90: v spodnjem delu večji premer luknje - izbrani očrt ne pripada dejavnemu telesu. - + Creating a face from sketch failed Ustvarjanje ploskve iz očrta spodletelo - + Revolve axis intersects the sketch Os vrtenine seka očrt @@ -4914,14 +4904,14 @@ nad 90: v spodnjem delu večji premer luknje Izrezovanje iz osnovne značilnosti spodletelo - + Could not revolve the sketch! Očrta ni mogoče zvrteti! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Iz očrta ni bilo mogoče ustvariti ploskve. @@ -4976,10 +4966,10 @@ Sekajoče se prvine očrta niso dovoljene. Napaka: ni mogoče narediti - + Error: Result is not a solid Napaka: dobljeno ni telo @@ -5081,32 +5071,32 @@ Sekajoče se prvine očrta niso dovoljene. Napaka: dodajanje navoja spodletelo + - Boolean operation failed Logična operacija spodletela - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Iz očrta ni bilo mogoče ustvariti ploskve. Sekanje enot očrta ali več ploskev v očrtu ni dopustno pri izdelavi ugreza v ploskev. - + Thread type out of range Vrsta navoja izven obsega - + Thread size out of range Velikost navoja izven obsega - + Error: Thread could not be built Napak: navoja ni bilo mogoče izvesti @@ -5410,63 +5400,58 @@ Sekajočih se prvin očrta ali več ploskev v očrtu ne sme biti. - The radii for cones must not be equal - Polmeri stožcev ne morejo biti enaki - - - Height of cone too small Premajhna višina stožca - - + + Radius of ellipsoid too small Premajhen polmer elipsoida - - + + Radius of torus too small Premajhen polmer svitka - + Polygon of prism is invalid, must have 3 or more sides Mnogokotnik prizma ni veljaven. Imeti mora najmanj 3 stranice - + Circumradius of the polygon, of the prism, is too small Premajhen polmer očrtane krožnice mnogokotnika prizme - + Height of prism is too small Premajhna višina prizme - + delta x of wedge too small sprememba x-a klina premajhna - + delta y of wedge too small sprememba y-a klina premajhna - + delta z of wedge too small sprememba z-ja klina premajhna - + delta z2 of wedge is negative sprememba klinovega z-ja 2 je negativna - + delta x2 of wedge is negative sprememba klinovega x-a 2 je negativna diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts index 9562c28dab..d4b1c4f8d7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts @@ -103,7 +103,7 @@ so that self intersection is avoided. True=external Gear False=internal Gear - True=external Gear False=internal Gear + Tačno=Spoljašnji zupčanik, Netačno=Unutrašnji zupčanik @@ -370,12 +370,12 @@ so that self intersection is avoided. Create a datum line - Napravi pomoćnu liniju + Napravi pomoćnu pravu Create a new datum line - Napravi novu pomoćnu liniju + Napravi novu pomoćnu pravu @@ -883,8 +883,8 @@ so that self intersection is avoided. Napravi klon - + Make copy Napravi kopiju @@ -909,8 +909,8 @@ so that self intersection is avoided. Napravi Bulovu operaciju - + Add a Body Dodaj telo @@ -1456,39 +1456,29 @@ nula, onda je jednak poluprečniku 2 Parametri primitivnih tela - - Cone radii are equal - Poluprečnici kupe su jednaki - - - - The radii for cones must not be equal! - Poluprečnici kupe ne smeju biti jednaki! - - - - - + + + Invalid wedge parameters Neispravni parametri klina - + X min must not be equal to X max! X min ne sme biti jednako sa X max! - + Y min must not be equal to Y max! Y min ne sme biti jednako sa Y max! - + Z min must not be equal to Z max! Z min ne sme biti jednako sa Z max! - + Create primitive Napravi primitivno telo @@ -1611,7 +1601,7 @@ klikni ponovo da bi završio izbor Input error - Input error + Greška pri unosu @@ -2660,7 +2650,7 @@ merena duž zadatog pravca Input error - Greška pri unosu + Input error @@ -2835,7 +2825,7 @@ merena duž zadatog pravca PartDesignGui::TaskPrimitiveParameters - + Attachment Pridruživanje @@ -3138,7 +3128,7 @@ klikni ponovo da bi završio izbor Construction line %1 - Pomoćna linija %1 + Pomoćna prava %1 @@ -3195,7 +3185,7 @@ klikni ponovo da bi završio izbor Datum Line parameters - Parametri pomoćne linije + Parametri pomoćne prave @@ -3384,17 +3374,17 @@ klikni ponovo da bi završio izbor Izaberi element sa liste - + Move tip Pomeri krajnji - + The moved feature appears after the currently set tip. Premešteni tipski oblik se pojavljuje iza krajnjeg. - + Do you want the last feature to be the new tip? Da li želiš da zadnji tipski oblik bude proglašen za krajnji? @@ -3469,28 +3459,28 @@ klikni ponovo da bi završio izbor Da bi mogao crtati skicu prvo napravi ravan ili izaberi stranicu - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3734,12 +3724,12 @@ Ovo može dovesti do neočekivanih rezultata. Početak tela - + Dependency violation Narušena međuzavisnost - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Ovo može dovesti do neočekivanih rezultata. Ne možeš primeniti tipske oblike koji prave udubljenja ako nemaš na raspolaganju osnovni tipski oblik - + Vertical sketch axis Vertikalna osa skice - + Horizontal sketch axis Horizontalna osa skice @@ -3819,10 +3809,10 @@ Ako imaš nasleđeni dokument sa PartDesign objektima bez tela, koristi funkciju Da bi koristio ovaj tipski oblik, on mora da pripada delu u dokumentu. - - + + Edit %1 Uredi %1 @@ -3846,7 +3836,7 @@ Ako imaš nasleđeni dokument sa PartDesign objektima bez tela, koristi funkciju Line - Linija + Duž @@ -4783,17 +4773,17 @@ iznad 90: veći poluprečnik rupe na dnu Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Dobijeni oblik nije puno telo @@ -4808,22 +4798,22 @@ iznad 90: veći poluprečnik rupe na dnu Bulova operacija presek nije uspela - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Rezultat ima više punih tela: ovo trenutno nije podržano. @@ -4886,8 +4876,8 @@ iznad 90: veći poluprečnik rupe na dnu Ugao kružnog udubljenja je suviše mali - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4898,14 +4888,14 @@ iznad 90: veći poluprečnik rupe na dnu - izabrana skica ne pripada aktivnom Telu. - + Creating a face from sketch failed Pravljenje stranica pomoću skice nije uspelo - + Revolve axis intersects the sketch Osa rotacije preseca skicu @@ -4915,14 +4905,14 @@ iznad 90: veći poluprečnik rupe na dnu Isecanje osnovnog tipskog oblika nije uspelo - + Could not revolve the sketch! Nije moguće rotirati skicu! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Nije moguće napraviti stranice pomoću skice. @@ -4977,10 +4967,10 @@ Nije dozvoljeno ukrštanje elemenata na skici. Greška: Nije moguće napraviti - + Error: Result is not a solid Greška: Rezultat nije puno telo @@ -5082,32 +5072,32 @@ Nije dozvoljeno ukrštanje elemenata na skici. Greška: Dodavanje navoja nije uspelo + - Boolean operation failed Bulova operacija nije uspela - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Nije moguće napraviti stranice pomoću skice. Ukrštanje elemenata skice ili više stranica u skici nije dozvoljeno za pravljenje udubljenja do stranice. - + Thread type out of range Tip navoja je van opsega - + Thread size out of range Veličina navoja je van opsega - + Error: Thread could not be built Greška: Nije moguće napraviti navoj @@ -5411,63 +5401,58 @@ Nije dozvoljeno ukrštanje elemenata ili više stranica u skici. - The radii for cones must not be equal - Poluprečnici kupe ne smeju biti jednaki - - - Height of cone too small Visina kupe je suviše mala - - + + Radius of ellipsoid too small Poluprečnik elipsoida je suviše mali - - + + Radius of torus too small Poluprečnik torusa je suviše mali - + Polygon of prism is invalid, must have 3 or more sides Mnogougao prizme je neispravan, mora imati 3 ili više stranica - + Circumradius of the polygon, of the prism, is too small Poluprečnik opisanog kruga mnogougla prizme je suviše mali - + Height of prism is too small Visina prizme je suviše mala - + delta x of wedge too small delta x klina suviše malo - + delta y of wedge too small delta y klina suviše malo - + delta z of wedge too small delta z klina suviše malo - + delta z2 of wedge is negative delta z2 klina je negativno - + delta x2 of wedge is negative delta x2 klina je negativno @@ -5522,7 +5507,7 @@ Nije dozvoljeno ukrštanje elemenata ili više stranica u skici. Active body - Active body + Aktivno Telo diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index e377537759..daec099c11 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -103,7 +103,7 @@ so that self intersection is avoided. True=external Gear False=internal Gear - True=external Gear False=internal Gear + Тачно=Спољашњи зупчаник, Нетачно=Унутрашњи зупчаник @@ -370,12 +370,12 @@ so that self intersection is avoided. Create a datum line - Направи помоћну линију + Направи помоћну праву Create a new datum line - Направи нову помоћну линију + Направи нову помоћну праву @@ -883,8 +883,8 @@ so that self intersection is avoided. Направи клон - + Make copy Направи копију @@ -909,8 +909,8 @@ so that self intersection is avoided. Направи Булову операцију - + Add a Body Додај тело @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Параметри примитивних тела - - Cone radii are equal - Полупречници купе су једнаки - - - - The radii for cones must not be equal! - Полупречници купе не смеју бити једнаки! - - - - - + + + Invalid wedge parameters Неисправни параметри клина - + X min must not be equal to X max! X мин не сме бити једнако са X max! - + Y min must not be equal to Y max! Y мин не сме бити једнако са Y max! - + Z min must not be equal to Z max! Z мин не сме бити једнако са Z max! - + Create primitive Направи примитивно тело @@ -1993,7 +1983,7 @@ click again to end selection Construction line %1 - Помоћна линија %1 + Помоћна права %1 @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Прилог @@ -3138,7 +3128,7 @@ click again to end selection Construction line %1 - Помоћна линија %1 + Помоћна права %1 @@ -3195,7 +3185,7 @@ click again to end selection Datum Line parameters - Параметри помоћне линије + Параметри помоћне праве @@ -3384,17 +3374,17 @@ click again to end selection Изабери типски облик са листе - + Move tip Помери крајњи - + The moved feature appears after the currently set tip. Премештени типски облик се појављује иза крајњег. - + Do you want the last feature to be the new tip? Да ли желиш да задњи типски облик буде проглашен за крајњи? @@ -3469,28 +3459,28 @@ click again to end selection Да би могао цртати скицу прво направи раван или изабери страницу - - - + + + + + - - A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака - - - + + + + + - - Do you want to close this dialog? Да ли желите да затворите овај дијалог? @@ -3734,12 +3724,12 @@ This may lead to unexpected results. Почетак тела - + Dependency violation Нарушена међузависност - + Early feature must not depend on later feature. @@ -3758,21 +3748,21 @@ This may lead to unexpected results. Не можеш применити типске облике који праве удубљења ако немаш на располагању основни типски облик - + Vertical sketch axis Вертикална оcа cкице - + Horizontal sketch axis Хоризонтална оса скице Construction line %1 - Помоћна линија %1 + Помоћна права %1 @@ -3819,10 +3809,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Да би користио овај типски облик, он мора да припада делу у документу. - - + + Edit %1 Уреди %1 @@ -3846,7 +3836,7 @@ If you have a legacy document with PartDesign objects without Body, use the migr Line - Линија + Дуж @@ -4783,17 +4773,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Добијени облик није пуно тело @@ -4808,22 +4798,22 @@ over 90: larger hole radius at the bottom Булова операција пресек није успела - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Резултат има више пуних тела: ово тренутно није подржано. @@ -4886,8 +4876,8 @@ over 90: larger hole radius at the bottom Угао кружног удубљења је сувише мали - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4898,14 +4888,14 @@ over 90: larger hole radius at the bottom - изабрана скица не припада активном Телу. - + Creating a face from sketch failed Прављење страница помоћу скице није успело - + Revolve axis intersects the sketch Оса ротације пресеца скицу @@ -4915,14 +4905,14 @@ over 90: larger hole radius at the bottom Исецање основног типског облика није успело - + Could not revolve the sketch! Није могуће ротирати скицу! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Није могуће направити странице помоћу скице. @@ -4977,10 +4967,10 @@ Intersecting sketch entities in a sketch are not allowed. Грешка: Није могуће направити - + Error: Result is not a solid Грешка: Резултат није пуно тело @@ -5082,32 +5072,32 @@ Intersecting sketch entities in a sketch are not allowed. Грешка: Додавање навоја није успело + - Boolean operation failed Булова операција није успела - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Није могуће направити странице помоћу скице. Укрштање елемената скице или више страница у скици није дозвољено за прављење удубљења до странице. - + Thread type out of range Тип навоја је ван опсега - + Thread size out of range Величина навоја је ван опсега - + Error: Thread could not be built Грешка: Није могуће направити навој @@ -5411,63 +5401,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - Полупречници купе не смеју бити једнаки - - - Height of cone too small Висина купе је сувише мала - - + + Radius of ellipsoid too small Полупречник елипсоида је сувише мали - - + + Radius of torus too small Полупречник торуса је сувише мали - + Polygon of prism is invalid, must have 3 or more sides Многоугао призме је неисправан, мора имати 3 или више страница - + Circumradius of the polygon, of the prism, is too small Полупречник описаног круга многоугла призме је сувише мали - + Height of prism is too small Висина призме је сувише мала - + delta x of wedge too small делта x клина сувише мало - + delta y of wedge too small делта y клина сувише мало - + delta z of wedge too small делта z клина сувише мало - + delta z2 of wedge is negative делта z2 клина је негативно - + delta x2 of wedge is negative делта x2 клина је негативно @@ -5522,7 +5507,7 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. Active body - Active body + Активно Тело diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index 7d499b90c3..39891b69ab 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -882,8 +882,8 @@ so that self intersection is avoided. Skapa klon - + Make copy Skapa kopia @@ -908,8 +908,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Lägg till en kropp @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 Primitivparametrar - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive Skapa primitiv @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment koppling @@ -3383,17 +3373,17 @@ click again to end selection Markera en funktion från listan - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3468,28 +3458,28 @@ click again to end selection Vänligen skapa ett plan först eller välj en yta att skissa på - - - + + + + + - - A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - - - + + + + + - - Do you want to close this dialog? Vill du stänga denna dialogruta? @@ -3729,12 +3719,12 @@ This may lead to unexpected results. Början av kroppen - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3753,14 +3743,14 @@ This may lead to unexpected results. Det går inte att skapa en subtraktiv funktion utan en tillgänglig basfunktion - + Vertical sketch axis Vertikal skissaxel - + Horizontal sketch axis Horisontell skissaxel @@ -3814,10 +3804,10 @@ Om du har ett utdaterat dokument med Part Design-objekt utan kropp, använd migr För att kunna använda denna funktion måste den tillhöra en del i dokumentet. - - + + Edit %1 Redigera %1 @@ -4777,17 +4767,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4802,22 +4792,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4880,8 +4870,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4892,14 +4882,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4909,14 +4899,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4971,10 +4961,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5076,32 +5066,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5405,63 +5395,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index 021f8f320c..7d00a882d7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Klone oluştur - + Make copy Kopya oluştur @@ -909,8 +909,8 @@ so that self intersection is avoided. Mantıksal (İşlem) Oluştur - + Add a Body Gövde Ekle @@ -1456,39 +1456,29 @@ Sıfır ise Yarıçap2'ye eşittir Basit nesne parametreleri - - Cone radii are equal - Koni yarıçapları eşit - - - - The radii for cones must not be equal! - Koniler için yarıçapları eşit olamaz! - - - - - + + + Invalid wedge parameters Geçersiz kama değişkenleri - + X min must not be equal to X max! En küçük X, en büyük X 'e eşit olamaz! - + Y min must not be equal to Y max! En küçük Y, en büyük Y 'ye eşit olamaz! - + Z min must not be equal to Z max! En küçük Z, en büyük Z 'ye eşit olamaz! - + Create primitive Basit nesne oluştur @@ -2835,7 +2825,7 @@ belirlenen yön boyunca ölçülecek PartDesignGui::TaskPrimitiveParameters - + Attachment Eklenti @@ -3384,17 +3374,17 @@ seçimi bitirmek için tekrar basın Listeden bir özellik seçin - + Move tip İpucuyu taşı - + The moved feature appears after the currently set tip. Taşınan özellik, o anda ayarlanmış olan ipucundan sonra görünür. - + Do you want the last feature to be the new tip? Son özelliğin yeni ipucu olmasını ister misiniz? @@ -3469,28 +3459,28 @@ seçimi bitirmek için tekrar basın Lütfen önce bir düzlem oluşturun ya da bir eskiz yüzeyi seçin - - - + + + + + - - A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - - - + + + + + - - Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? @@ -3734,12 +3724,12 @@ Bu, beklenmedik sonuçlara neden olabilir. Vücudun başlangıcı - + Dependency violation Bağımlılık ihlali - + Early feature must not depend on later feature. @@ -3758,14 +3748,14 @@ Bu, beklenmedik sonuçlara neden olabilir. Mevcut bir temel özellik olmadan bir çıkarılabilir özellik oluşturmak mümkün değildir - + Vertical sketch axis Dikey taslak ekseni - + Horizontal sketch axis Yatay taslak ekseni @@ -3819,10 +3809,10 @@ Gövdeye sahip olmayan nesneler içeren eski bir belgeniz varsa, bunları bir g Bu özelliği kullanmak için belgedeki bir parçaya ait olması gerekir. - - + + Edit %1 %1'i düzenle @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Oluk açısı çok dar - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - seçili eskiz etkin Gövdeye ait değil. - + Creating a face from sketch failed Taslakdan yüzey yaratma hatası - + Revolve axis intersects the sketch Çevirme ekseni taslak ile kesizşiyor @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index c999ae450e..d3f193a6af 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Створити Клон - + Make copy Зробити копію @@ -909,8 +909,8 @@ so that self intersection is avoided. Створити Булеву операцію - + Add a Body Додати Тіло @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Параметри примітива - - Cone radii are equal - Радіуси конуса рівні - - - - The radii for cones must not be equal! - Радіуси для конусів не повинні бути рівними! - - - - - + + + Invalid wedge parameters Невірні параметри клина - + X min must not be equal to X max! X min не повинен дорівнювати Х max! - + Y min must not be equal to Y max! Y min не повинен дорівнювати Y max! - + Z min must not be equal to Z max! Z min не повинен дорівнювати Z max! - + Create primitive Створити примітив @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Приєднання @@ -3383,17 +3373,17 @@ click again to end selection Оберіть елемент зі списку - + Move tip Перемістити кінцеву точку розрахунку - + The moved feature appears after the currently set tip. Переміщений елемент з’являється після встановлення наявної кінцевої точки розрахунку. - + Do you want the last feature to be the new tip? Бажаєте, щоб остання функція була новою кінцевою точкою розрахунку? @@ -3468,28 +3458,28 @@ click again to end selection Будь ласка, спочатку створіть або виберіть грань для розміщення ескізу - - - + + + + + - - A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - - - + + + + + - - Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? @@ -3733,12 +3723,12 @@ This may lead to unexpected results. Початок тіла - + Dependency violation Порушення залежностей - + Early feature must not depend on later feature. @@ -3757,14 +3747,14 @@ This may lead to unexpected results. Неможливо створити субтрактивний елемент без базового елементу - + Vertical sketch axis Вертикальна вісь ескізу - + Horizontal sketch axis Горизонтальна вісь ескізу @@ -3818,10 +3808,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr Щоб використовувати цю функцію, вона повина належати обʼєкту Деталь в документі. - - + + Edit %1 Редагувати %1 @@ -4782,17 +4772,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4807,22 +4797,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4885,8 +4875,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4897,14 +4887,14 @@ over 90: larger hole radius at the bottom - виділений ескіз не належить до активного тіла. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4914,14 +4904,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4976,10 +4966,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5081,32 +5071,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5410,63 +5400,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts index 76e1d929b9..fde8a77f01 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. Create Clone - + Make copy Make copy @@ -909,8 +909,8 @@ so that self intersection is avoided. Create Boolean - + Add a Body Add a Body @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 Paràmetres de primitiva - - Cone radii are equal - Cone radii are equal - - - - The radii for cones must not be equal! - The radii for cones must not be equal! - - - - - + + + Invalid wedge parameters Invalid wedge parameters - + X min must not be equal to X max! X min must not be equal to X max! - + Y min must not be equal to Y max! Y min must not be equal to Y max! - + Z min must not be equal to Z max! Z min must not be equal to Z max! - + Create primitive Crea una primitiva @@ -2835,7 +2825,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment Adjunt @@ -3384,17 +3374,17 @@ click again to end selection Seleccioneu un element de la llista - + Move tip Move tip - + The moved feature appears after the currently set tip. The moved feature appears after the currently set tip. - + Do you want the last feature to be the new tip? Do you want the last feature to be the new tip? @@ -3469,28 +3459,28 @@ click again to end selection Creeu primer un pla o seleccioneu una cara a esbossar - - - + + + + + - - A dialog is already open in the task panel A dialog is already open in the task panel - - - + + + + + - - Do you want to close this dialog? Do you want to close this dialog? @@ -3732,12 +3722,12 @@ Això pot portar a resultats inesperats. Començament del cos - + Dependency violation Dependency violation - + Early feature must not depend on later feature. @@ -3756,14 +3746,14 @@ Això pot portar a resultats inesperats. No és possible crear una funció subtractiva sense una funció de base disponible. - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3817,10 +3807,10 @@ Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funci Per a utilitzar aquesta característica ha de pertànyer a un objecte peça del document. - - + + Edit %1 Edita %1 @@ -4780,17 +4770,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4805,22 +4795,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4883,8 +4873,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4895,14 +4885,14 @@ over 90: larger hole radius at the bottom - the selected sketch does not belong to the active Body. - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4912,14 +4902,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4974,10 +4964,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5079,32 +5069,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed Boolean operation failed - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5408,63 +5398,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index 96fae46378..def36cb865 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. 创建副本 - + Make copy 制作副本 @@ -909,8 +909,8 @@ so that self intersection is avoided. 创建布尔变量 - + Add a Body 添加实体 @@ -1456,39 +1456,29 @@ If zero, it is equal to Radius2 图元参数 - - Cone radii are equal - 圆锥形半径相等 - - - - The radii for cones must not be equal! - 圆锥的半径不相等！ - - - - - + + + Invalid wedge parameters 无效的请求参数 - + X min must not be equal to X max! X最小值不能等于X最大值！ - + Y min must not be equal to Y max! Y 最小值不能等于Y 最大值！ - + Z min must not be equal to Z max! Z最小值不能等于Z最大值！ - + Create primitive 创建图元 @@ -2834,7 +2824,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment 附着 @@ -3383,17 +3373,17 @@ click again to end selection 从列表中选择特征 - + Move tip 移动结算位置 - + The moved feature appears after the currently set tip. 被移动特征出现在当前设置的结算位置之后。 - + Do you want the last feature to be the new tip? 您想要最后一个特征成为新的结算位置？ @@ -3468,28 +3458,28 @@ click again to end selection 请先创建一个平面或选择一个平面用于画草图 - - - + + + + + - - A dialog is already open in the task panel 一个对话框已在任务面板打开 - - - + + + + + - - Do you want to close this dialog? 您要关闭此对话框吗? @@ -3733,12 +3723,12 @@ This may lead to unexpected results. 实体的起始 - + Dependency violation 依赖冲突 - + Early feature must not depend on later feature. @@ -3757,14 +3747,14 @@ This may lead to unexpected results. 如果没有可用的基础特征, 就不可能创建减料特征 - + Vertical sketch axis 垂直草绘轴 - + Horizontal sketch axis 水平草绘轴 @@ -3818,10 +3808,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr 要使用此特征, 它需隶属于文档中的零件对象。 - - + + Edit %1 编辑 %1 @@ -4780,17 +4770,17 @@ over 90: larger hole radius at the bottom Fusion of tools failed - - - - + + + + + + - - Resulting shape is not a solid Resulting shape is not a solid @@ -4805,22 +4795,22 @@ over 90: larger hole radius at the bottom Common operation failed - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. Result has multiple solids: that is not currently supported. @@ -4883,8 +4873,8 @@ over 90: larger hole radius at the bottom Angle of groove too small - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4895,14 +4885,14 @@ over 90: larger hole radius at the bottom - 选中的草图不属于活动实体。 - + Creating a face from sketch failed Creating a face from sketch failed - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4912,14 +4902,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4974,10 +4964,10 @@ Intersecting sketch entities in a sketch are not allowed. Error: Could not build - + Error: Result is not a solid Error: Result is not a solid @@ -5079,32 +5069,32 @@ Intersecting sketch entities in a sketch are not allowed. Error: Adding the thread failed + - Boolean operation failed 布尔操作失败 - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. - + Thread type out of range Thread type out of range - + Thread size out of range Thread size out of range - + Error: Thread could not be built Error: Thread could not be built @@ -5408,63 +5398,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - The radii for cones must not be equal - - - Height of cone too small Height of cone too small - - + + Radius of ellipsoid too small Radius of ellipsoid too small - - + + Radius of torus too small Radius of torus too small - + Polygon of prism is invalid, must have 3 or more sides Polygon of prism is invalid, must have 3 or more sides - + Circumradius of the polygon, of the prism, is too small Circumradius of the polygon, of the prism, is too small - + Height of prism is too small Height of prism is too small - + delta x of wedge too small delta x of wedge too small - + delta y of wedge too small delta y of wedge too small - + delta z of wedge too small delta z of wedge too small - + delta z2 of wedge is negative delta z2 of wedge is negative - + delta x2 of wedge is negative delta x2 of wedge is negative diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index bf1ac21b1f..3c436d3a36 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -883,8 +883,8 @@ so that self intersection is avoided. 建立一個副本 - + Make copy 製作拷貝 @@ -909,8 +909,8 @@ so that self intersection is avoided. 建立布林運算 - + Add a Body 增加一個實體 @@ -1455,39 +1455,29 @@ If zero, it is equal to Radius2 幾何形體參數 - - Cone radii are equal - 錐體半徑相等 - - - - The radii for cones must not be equal! - 錐體之半徑必須不相等! - - - - - + + + Invalid wedge parameters 無效的楔形體參數 - + X min must not be equal to X max! X 最小值必須不等於 X 最大值! - + Y min must not be equal to Y max! Y 最小值必須不等於 Y 最大值! - + Z min must not be equal to Z max! Z 最小值必須不等於 Z 最大值! - + Create primitive 建立幾何形體 @@ -2827,7 +2817,7 @@ measured along the specified direction PartDesignGui::TaskPrimitiveParameters - + Attachment 附件 @@ -3375,17 +3365,17 @@ click again to end selection 從清單中選擇特徵 - + Move tip 移動尖點 - + The moved feature appears after the currently set tip. 移動特徵出現在當前設置的尖點之後。 - + Do you want the last feature to be the new tip? 您希望最後一個特徵為新的尖點嗎？ @@ -3460,28 +3450,28 @@ click again to end selection 請先創建一個平面或選擇要在其上繪製草圖的面 - - - + + + + + - - A dialog is already open in the task panel 於工作面板已開啟對話窗 - - - + + + + + - - Do you want to close this dialog? 您確定要關閉此對話窗嗎? @@ -3725,12 +3715,12 @@ This may lead to unexpected results. 實體的起點 - + Dependency violation 相依性衝突 - + Early feature must not depend on later feature. @@ -3747,14 +3737,14 @@ This may lead to unexpected results. 如果沒有可用的基本特徵，則無法創建除料特徵 - + Vertical sketch axis 垂直草圖軸 - + Horizontal sketch axis 水平草圖軸 @@ -3808,10 +3798,10 @@ If you have a legacy document with PartDesign objects without Body, use the migr 為了使用此特徵，它需要屬於文件中的一個零件物件。 - - + + Edit %1 編輯 %1 @@ -4770,17 +4760,17 @@ over 90: larger hole radius at the bottom 工具的融合失敗 - - - - + + + + + + - - Resulting shape is not a solid 產成形狀不是固體 @@ -4795,22 +4785,22 @@ over 90: larger hole radius at the bottom 通用操作失敗 - - - - - - - - + + + + + + + + + + - - Result has multiple solids: that is not currently supported. 產生形狀有多重(非相連)固體：目前尚未支援。 @@ -4873,8 +4863,8 @@ over 90: larger hole radius at the bottom 挖槽的角度太小 - + The requested feature cannot be created. The reason may be that: - the active Body does not contain a base shape, so there is no material to be removed; @@ -4884,14 +4874,14 @@ over 90: larger hole radius at the bottom - 所選擇的草圖不屬於活躍實體。 - + Creating a face from sketch failed 由草圖建立面失敗 - + Revolve axis intersects the sketch Revolve axis intersects the sketch @@ -4901,14 +4891,14 @@ over 90: larger hole radius at the bottom Cut out of base feature failed - + Could not revolve the sketch! Could not revolve the sketch! - + Could not create face from sketch. Intersecting sketch entities in a sketch are not allowed. Could not create face from sketch. @@ -4963,10 +4953,10 @@ Intersecting sketch entities in a sketch are not allowed. 錯誤：無法建立 - + Error: Result is not a solid 錯誤：產生形狀不是固體 @@ -5068,31 +5058,31 @@ Intersecting sketch entities in a sketch are not allowed. 錯誤：添加螺旋失敗 + - Boolean operation failed 布林運算失敗 - + Could not create face from sketch. Intersecting sketch entities or multiple faces in a sketch are not allowed for making a pocket up to a face. 無法從草圖建立面。草圖實體的交叉或草圖中存在多個面不允許製作一個沖孔至一個面。 - + Thread type out of range 螺紋類型超出範圍 - + Thread size out of range 螺紋尺寸超出範圍 - + Error: Thread could not be built 錯誤：無法建立螺紋 @@ -5396,63 +5386,58 @@ Intersecting sketch entities or multiple faces in a sketch are not allowed. - The radii for cones must not be equal - 錐體之半徑必須不相等 - - - Height of cone too small 錐體高度太小 - - + + Radius of ellipsoid too small 橢球體的半徑太小 - - + + Radius of torus too small 環形圓(甜甜圈狀)的半徑太小 - + Polygon of prism is invalid, must have 3 or more sides 角柱體的多邊形為無效的，必須具有3個或更多個邊 - + Circumradius of the polygon, of the prism, is too small 多邊形或角柱體的外接圓半徑太小 - + Height of prism is too small 角柱體的高度太小 - + delta x of wedge too small 楔形體的 x 差量太小 - + delta y of wedge too small 楔形體的 y 差量太小 - + delta z of wedge too small 楔形體的 z 差量太小 - + delta z2 of wedge is negative 楔形體的 z2 差量為負值 - + delta x2 of wedge is negative 楔形體的 x2 差量為負值 diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index a29a66b859..72f61df070 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -701,17 +701,17 @@ For stock from the Base object's bounding box it means the extra material i - + Add - - + + Remove @@ -762,8 +762,8 @@ Reset deletes all current items from the list and fills the list with all circul - + All objects will be processed using the same operation properties. @@ -808,32 +808,32 @@ Reset deletes all current items from the list and fills the list with all circul - + Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -848,14 +848,14 @@ Reset deletes all current items from the list and fills the list with all circul - + Final Depth - + Step Down @@ -895,34 +895,34 @@ Reset deletes all current items from the list and fills the list with all circul - + + + + - - - - + The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode @@ -932,28 +932,28 @@ Reset deletes all current items from the list and fills the list with all circul - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller - - + + Coolant @@ -973,8 +973,8 @@ Reset deletes all current items from the list and fills the list with all circul - + Step Over Percent @@ -1024,8 +1024,8 @@ Reset deletes all current items from the list and fills the list with all circul - + Use Outline @@ -1080,10 +1080,10 @@ Reset deletes all current items from the list and fills the list with all circul - + - + Direction @@ -1093,15 +1093,15 @@ Reset deletes all current items from the list and fills the list with all circul - + CW - + CCW @@ -1126,6 +1126,8 @@ Reset deletes all current items from the list and fills the list with all circul + + @@ -1135,8 +1137,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm @@ -1352,11 +1352,11 @@ Reset deletes all current items from the list and fills the list with all circul + + - - The tool and its settings to be used for this operation @@ -1455,9 +1455,9 @@ The latter can be used to face of the entire stock area to ensure uniform height + - Use Start Point @@ -1713,9 +1713,9 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Layer Mode @@ -1755,8 +1755,8 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Cut Pattern @@ -1771,14 +1771,14 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Bounding Box - + Select the overall boundary for the operation. @@ -1788,14 +1788,14 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. @@ -1820,14 +1820,14 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. @@ -1837,8 +1837,8 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1873,28 +1873,28 @@ The latter can be used to face of the entire stock area to ensure uniform height - + Step over - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. - + Sample interval - + Optimize Linear Paths @@ -2028,8 +2028,8 @@ Default: 3 mm - + Type @@ -2059,8 +2059,8 @@ Default: 3 mm - + Operation @@ -2943,8 +2943,8 @@ Should multiple tools or tool shapes with the same name exist in different direc - + Radius @@ -3359,8 +3359,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator @@ -4191,10 +4191,9 @@ For example: - + Edit - int = field(default=None) @@ -4336,8 +4335,8 @@ For example: - + %s is not a Base Model object of the job %s @@ -4357,8 +4356,8 @@ For example: - + Choose a Path Job @@ -4462,6 +4461,7 @@ For example: List of custom property groups + int = field(default=None) @@ -4524,12 +4524,12 @@ For example: + + - - The base path to modify @@ -4823,9 +4823,9 @@ For example: + - Operations Cycle Time Estimation @@ -4910,8 +4910,8 @@ For example: - + Make False, to prevent operation from generating code @@ -4931,8 +4931,8 @@ For example: - + Percent of cutter diameter to step over on each pass @@ -5108,10 +5108,10 @@ For example: - - - + + + Make True, if specifying a Start Point @@ -5225,9 +5225,9 @@ For example: - + Additional base objects to be engraved @@ -5268,9 +5268,9 @@ For example: - + Extra value to stay away from final profile- good for roughing toolpath @@ -5290,9 +5290,9 @@ For example: - - + + Choose how to process multiple Base Geometry features. @@ -5313,8 +5313,8 @@ For example: - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5421,8 +5421,8 @@ For example: - + Show the temporary path construction objects when module is in DEBUG mode. @@ -5438,8 +5438,8 @@ For example: - + Set the geometric clearing pattern to use for the operation. @@ -5455,8 +5455,8 @@ For example: - + Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5487,8 +5487,8 @@ For example: - + The custom start point for the path of this operation @@ -6002,22 +6002,22 @@ For example: Path_Dressup - + Please select one path object - + The selected object is not a path - + Please select a Path object @@ -6174,8 +6174,8 @@ For example: - + All Files (*.*) @@ -6903,14 +6903,14 @@ For example: PathProfile - + Outside - + Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_be.ts b/src/Mod/Path/Gui/Resources/translations/Path_be.ts index 78f52fe3f7..2eb132f3b7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_be.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_be.ts @@ -722,17 +722,17 @@ FreeCAD пастаўляецца з некалькімі прадусталяв Ачысціць спіс асноўнай геаметрыі - + Add Дадаць - - + + Remove Выдаліць @@ -790,8 +790,8 @@ Reset deletes all current items from the list and fills the list with all circul Скінуць - + All objects will be processed using the same operation properties. Усе аб'екты будуць апрацаваныя з ужываннем адных і тых жа ўласцівасцяў аперацыі. @@ -837,33 +837,33 @@ Reset deletes all current items from the list and fills the list with all circul Усе месцазнаходжанні будуць апрацаваныя з ужываннем адных і тых жа ўласцівасцяў аперацыі. - + Start Depth Пачатковая глыбіня - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Пачатковая глыбіня аперацыі. Самая высокая кропка па восі Z, якую неабходна апрацаваць. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Перадайце значэнне Z абранай характарыстыкі ў якасці пачатковай глыбіні для аперацыі. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Глыбіня аперацыі, якая адпавядае найменшаму значэнню па восі Z, якую неабходна апрацаваць. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Перадайце значэнне Z абранай характарыстыкі ў якасці канчатковай глыбіні для аперацыі. @@ -881,14 +881,14 @@ Reset deletes all current items from the list and fills the list with all circul Можа ўжывацца для атрымання больш чыстага пакрыцця. - + Final Depth Канчатковая глыбіня - + Step Down Крок уніз @@ -929,34 +929,34 @@ Reset deletes all current items from the list and fills the list with all circul Вышыня зазору - + + + + - - - - + The tool and its settings to be used for this operation. Інструмент і яго налады, якія будуць ужывацца для дадзенай аперацыі. + + + + + + + + + + - - - - - - - - - - Coolant Mode Рэжым астуджэння @@ -966,28 +966,28 @@ Reset deletes all current items from the list and fills the list with all circul G-код - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Кантролер інструментаў - - + + Coolant Астуджальная вадкасць @@ -1007,8 +1007,8 @@ Reset deletes all current items from the list and fills the list with all circul Тып аперацыи - + Step Over Percent Крок наперад у адсотках @@ -1058,8 +1058,8 @@ Reset deletes all current items from the list and fills the list with all circul Аздабіць профіль - + Use Outline Ужываць контур @@ -1118,10 +1118,10 @@ Reset deletes all current items from the list and fills the list with all circul Спыніць - + - + Direction Напрамак @@ -1131,15 +1131,15 @@ Reset deletes all current items from the list and fills the list with all circul Напрамак, у якім выконваецца профіль, па гадзінніку ці супраць. - + CW Па гадзінніку - + CCW Супраць гадзінніка @@ -1164,6 +1164,8 @@ Reset deletes all current items from the list and fills the list with all circul Дыяганальнае аб'яднанне + + @@ -1173,8 +1175,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm мм @@ -1393,11 +1393,11 @@ Reset deletes all current items from the list and fills the list with all circul Шаблон + + - - The tool and its settings to be used for this operation @@ -1501,9 +1501,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Дапаможнік матэрыялу + - Use Start Point Ужыць пачатковую кропку @@ -1765,9 +1765,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Выцягнуць канец траекторыі - + Layer Mode Рэжым пластоў @@ -1807,8 +1807,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Тып сканіравання - + Cut Pattern Шаблон апрацоўкі @@ -1823,14 +1823,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Пазбягайце апошніх X граняў - + Bounding Box Габарыты - + Select the overall boundary for the operation. Абраць агульную мяжу для аперацыі. @@ -1841,14 +1841,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Вярчальны: вярчальнае сканіраванне па чацвёртай восі. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Завершае аперацыю за адзін праход на глыбіню, альбо за некалькі праходаў да канчатковай глыбіні. - + Set the geometric clearing pattern to use for the operation. Задаць геаметрычны шаблон ачысткі, які будзе ўжывацца для аперацыі. @@ -1873,14 +1873,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Лініі фрэзеравання ствараць паралельна дадзенай восі. - + Set the Z-axis depth offset from the target surface. Задаць зрушэнне глыбіні па восі Z ад мэтавай паверхні. - + Set the sampling resolution. Smaller values quickly increase processing time. Задаць дазвол выбаркі. Меншыя значэння хутка павялічваюць час апрацоўкі. @@ -1890,8 +1890,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Задаць True, калі пакажыце пачатковую кропку - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Уключыць аптымізацыю лінейных траекторый (калінеарных кропак). Выдаляе непатрэбныя калінеарныя кропкі з вываду G-кода. @@ -1926,14 +1926,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Зрушэнне глыбіні - + Step over Пераступіць - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1941,14 +1941,14 @@ A step over of 100% results in no overlap between two different cycles. Пераход на 100% не прыводзіць да перакрыцця двух розных цыклаў. - + Sample interval Інтэрвал выбаркі - + Optimize Linear Paths Аптымізаваць лінейныя траекторыі @@ -2089,8 +2089,8 @@ Default: 3 mm Арыентацыя - + Type Тып @@ -2120,8 +2120,8 @@ Default: 3 mm Крок (віткоў на цалю) - + Operation Аперацыя @@ -3049,8 +3049,8 @@ Should multiple tools or tool shapes with the same name exist in different direc Аздабленне восей - + Radius Радыус @@ -3471,8 +3471,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Сродак мадэлявання траекторый @@ -4358,10 +4358,9 @@ For example: Больш не паказваць - + Edit - int = field(default=None) Змяніць @@ -4503,8 +4502,8 @@ For example: Неплоскі адаптыўны запуск таксама недаступны. - + %s is not a Base Model object of the job %s %s не з'яўляецца аб'ектам асноўнай мадэлі задання %s @@ -4524,8 +4523,8 @@ For example: Профіль усёй мадэлі, абраных граняў ці абраны' рэбраў - + Choose a Path Job Абраць траекторыю да задання @@ -4629,6 +4628,7 @@ For example: List of custom property groups + int = field(default=None) Спіс карыстальніцкіх суполак уласцівасцяў @@ -4691,12 +4691,12 @@ For example: + + - - The base path to modify Асноўная траекторыя для змены @@ -4990,9 +4990,9 @@ For example: Калекцыя ўсіх кантролераў інструментаў для задання + - Operations Cycle Time Estimation Ацэнка часу цыклу аперацыі @@ -5077,8 +5077,8 @@ For example: Нумар зрушэння прыстасавання - + Make False, to prevent operation from generating code Задаць False, каб прадухіліць стварэнне G-кода для аперацыи @@ -5098,8 +5098,8 @@ For example: Уплывае на дакладнасць і эфектыўнасць - + Percent of cutter diameter to step over on each pass Адсотак дыяметра разца, які неабходна пераступаць пры кожным праходзе @@ -5275,10 +5275,10 @@ For example: Пачатковая кропка траекторыі - - - + + + Make True, if specifying a Start Point Задаць True, калі пакажыце пачатковую кропку @@ -5393,9 +5393,9 @@ For example: Прымяніць адвод G99: толькі адвод на вышыню адводу (RetractHeight) паміж адтулінамі ў дадзенай аперацыі - + Additional base objects to be engraved Дадатковыя асноўныя аб'екты для гравіроўкі @@ -5436,9 +5436,9 @@ For example: Радыус пачатку - + Extra value to stay away from final profile- good for roughing toolpath Дадатковае значэнне, якое дазваляе трымацца далей ад канчатковага профілю - падыходзіць для траекторыі інструмента чарнавой апрацоўкі @@ -5458,9 +5458,9 @@ For example: Выключыць фрэзераванне, якія выступаюць адносна ўнутранай грані. - - + + Choose how to process multiple Base Geometry features. Абраць спосаб апрацоўкі некалькіх характарыстык асноўнай геаметрыі. @@ -5481,8 +5481,8 @@ For example: Апрацаваць мадэль і загатоўку ў аперацыі без выбару асноўнай геаметрыі. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Напрамак, у якім траекторыя руху інструмента павінна праходзіць вакол дэталі па гадзінніку (CW) ці супраць (CCW) @@ -5590,8 +5590,8 @@ For example: Задаць True, калі ўжываецца карэкцыя радыусу разца - + Show the temporary path construction objects when module is in DEBUG mode. Паказаць аб'екты пабудовы часовай траекторыі, калі модуль знаходзіцца ў рэжыме адладкі. @@ -5607,8 +5607,8 @@ For example: Увядзіце карыстальніцкую канчатковую кропку для траекторыі паза. - + Set the geometric clearing pattern to use for the operation. Задаць геаметрычны шаблон ачысткі, які будзе ўжывацца для аперацыі. @@ -5624,8 +5624,8 @@ For example: Станоўчае значэнне выцягвае канец траекторыі, адмоўнае - скарачае. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Завершае аперацыю за адзін праход на глыбіню, альбо за некалькі праходаў да канчатковай глыбіні. @@ -5656,8 +5656,8 @@ For example: Уключыць, каб змяніць напрамак апрацоўкі траекторыі паза ў зваротным напрамку. - + The custom start point for the path of this operation Карыстальніцкая пачатковая кропка для траекторыі выканання аперацыі @@ -6175,24 +6175,24 @@ For example: Path_Dressup - + Please select one path object Калі ласка, абярыце адзін аб'ект траекторыі - + The selected object is not a path Абраны аб'ект не з'яўляецца траекторыяй - + Please select a Path object Калі ласка, абярыце аб'ект траекторыі @@ -6349,8 +6349,8 @@ For example: Абраць файл кропкі зандзіравання - + All Files (*.*) Усе файлы (*.*) @@ -7081,14 +7081,14 @@ For example: PathProfile - + Outside Звонку - + Inside Унутры diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index 446c8abbd8..2ee0a6f882 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Afegeix - - + + Remove Elimina @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Reinicia - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controlador d'eina - - + + Coolant Refrigerant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Atura - + - + Direction Direcció @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW Sentit horari - + CCW Sentit antihorari @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Passa al següent - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientació - + Type Tipus @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operació @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radi @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Edita @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Tots els arxius (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index 7536a756e6..025308ae6c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -711,17 +711,17 @@ U polotovaru z ohraničujícího kvádru základního objektu to znamená příd Vymaže seznam základních geometrií - + Add Přidat - - + + Remove Odstranit @@ -776,8 +776,8 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Reset - + All objects will be processed using the same operation properties. Všechny objekty budou zpracovány pomocí stejných vlastností operace. @@ -822,32 +822,32 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Všechna místa budou zpracována za použití stejných vlastností operace. - + Start Depth Počáteční hloubka - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Počáteční hloubka operace. Nejvyšší bod v ose Z, kterou musí operace zpracovat. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Přenést hodnotu Z vybraného prvku jako počáteční hloubku operace. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Hloubka operace, která odpovídá nejnižší hodnotě v ose Z, kterou má operace zpracovat. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Přenést hodnotu Z vybraného prvku jako konečnou hloubku operace. @@ -862,14 +862,14 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Hloubka posledního řezu operace. Může být použita k dosažení kvalitnějšího povrchu. - + Final Depth Konečná hloubka - + Step Down Krok dolů @@ -909,34 +909,34 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Výška přejezdu - + + + + - - - - + The tool and its settings to be used for this operation. Nástroj a jeho nastavení pro tuto operaci. + + + + + + + + + + - - - - - - - - - - Coolant Mode Režimy chlazení @@ -946,28 +946,28 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v G kódy - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Správa nástroje - - + + Coolant Chladivo @@ -987,8 +987,8 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Typ operace - + Step Over Percent Krok procentem @@ -1038,8 +1038,8 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Dokončování profilu - + Use Outline Použít obrys @@ -1094,10 +1094,10 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Stop - + - + Direction Směr @@ -1107,15 +1107,15 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Směr, ve kterém se obrábí kontura, vpravo nebo vlevo. - + CW Pravotočivý - + CCW Levotočivý @@ -1140,6 +1140,8 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Úkosový spoj + + @@ -1149,8 +1151,6 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v - - mm mm @@ -1366,11 +1366,11 @@ Funkce Obnovit odstraní ze seznamu všechny aktuální prvky a doplní seznam v Vzor + + - - The tool and its settings to be used for this operation @@ -1471,9 +1471,9 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Přídavek materiálu + - Use Start Point Použít počáteční bod @@ -1729,9 +1729,9 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Prodloužit konec dráhy - + Layer Mode Režim vrstvy @@ -1771,8 +1771,8 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Skenovat typ - + Cut Pattern Vzor řezu @@ -1787,14 +1787,14 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Vyhnout se posledním X plochám - + Bounding Box Ohraničující kvádr - + Select the overall boundary for the operation. Vybrat celkovou hranici operace. @@ -1804,14 +1804,14 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Rovinný: Plochý, 3D sken povrchu. Rotační: rotační skenování ve 4. ose. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Dokončit operaci jedním průchodem v hloubce nebo několika průchody do konečné hloubky. - + Set the geometric clearing pattern to use for the operation. Nastavit vzor geometrického začišťování, který se má použít pro operaci. @@ -1836,14 +1836,14 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Čáry kapkového nástroje jsou vytvořeny rovnoběžně s touto osou. - + Set the Z-axis depth offset from the target surface. Nastavit hloubkový posun osy Z od cílového povrchu. - + Set the sampling resolution. Smaller values quickly increase processing time. Nastavení rozlišení vzorkování. Menší hodnoty rychle prodlužují dobu zpracování. @@ -1853,8 +1853,8 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Pokud zadáváte počáteční bod, vyberte hodnotu True - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Povolit optimalizaci lineárních drah (kolineární body). Odstraní nepotřebné kolineární body z výstupu G-kódu. @@ -1889,14 +1889,14 @@ Poslední možnost lze použít k zajištění rovnoměrných výšek celého po Ofset hloubky - + Step over Krok - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1905,14 +1905,14 @@ A step over of 100% results in no overlap between two different cycles. Krok 100 % vede k tomu, že se dva různé cykly nepřekrývají. - + Sample interval Interval vzoru - + Optimize Linear Paths Optimalizovat lineární dráhy @@ -2060,8 +2060,8 @@ Výchozí: 3 mm Orientace - + Type Typ @@ -2091,8 +2091,8 @@ Výchozí: 3 mm TPI - + Operation Operace @@ -3013,8 +3013,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Poloměr @@ -3429,8 +3429,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Simulátor dráhy @@ -4321,10 +4321,9 @@ Příklad: Již nezobrazovat - + Edit - int = field(default=None) Upravit @@ -4466,8 +4465,8 @@ Příklad: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s není objekt základního modelu úlohy %s @@ -4487,8 +4486,8 @@ Příklad: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Vyberte si úlohu cesty @@ -4592,6 +4591,7 @@ Příklad: List of custom property groups + int = field(default=None) List of custom property groups @@ -4654,12 +4654,12 @@ Příklad: + + - - The base path to modify The base path to modify @@ -4953,9 +4953,9 @@ Příklad: Sbírka všech ovladačů nástrojů pro danou úlohu + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5040,8 +5040,8 @@ Příklad: Číslo offsetu zařízení - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5061,8 +5061,8 @@ Příklad: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5238,10 +5238,10 @@ Příklad: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5355,9 +5355,9 @@ Příklad: Aplikujte odtažení G99: v této operaci se stáhněte pouze do výšky RetractHeight mezi otvory - + Additional base objects to be engraved Další základní předměty, které mají být vyryty @@ -5398,9 +5398,9 @@ Příklad: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Mimořádná hodnota pro udržení vzdálenosti od konečného profilu – dobré pro hrubování dráhy nástroje @@ -5420,9 +5420,9 @@ Příklad: Vyloučit frézování vyvýšených oblastí uvnitř čela. - - + + Choose how to process multiple Base Geometry features. Zvolte způsob zpracování více základních geometrických prvků. @@ -5443,8 +5443,8 @@ Příklad: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5551,8 +5551,8 @@ Příklad: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5568,8 +5568,8 @@ Příklad: Zadat uživatelský koncový bod pro dráhu drážky. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5585,8 +5585,8 @@ Příklad: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Dokončit operaci jedním průchodem v hloubce nebo několika průchody do konečné hloubky. @@ -5617,8 +5617,8 @@ Příklad: Povolit otočení směru řezu dráhy drážky. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6133,24 +6133,24 @@ Příklad: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6307,8 +6307,8 @@ Příklad: Select Probe Point File - + All Files (*.*) Všechny soubory (*.*) @@ -7039,14 +7039,14 @@ Příklad: PathProfile - + Outside Vně - + Inside Uvnitř diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index a6ead185cd..4abb292e6b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -712,17 +712,17 @@ Für das Standard Rohmaterial aus dem Begrenzungsrahmen des Basisobjekts bedeute Löscht die Liste der Basisgeometrien - + Add Hinzufügen - - + + Remove Entfernen @@ -777,8 +777,8 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Zurücksetzen - + All objects will be processed using the same operation properties. Alle Objekte werden nach den selben Operations-Eigenschaften verarbeitet. @@ -823,32 +823,32 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Alle Orte werden mit denselben Operationseigenschaften bearbeitet. - + Start Depth Starttiefe - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Starthöhe der Operation. Der höchste Punkt in der Z-Achse, den die Operation bearbeiten muss. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Übertragen Sie den Z-Wert der ausgewählten Funktion als Starthöhe für die Operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Die Tiefe der Operation, die dem niedrigsten Wert in der Z-Achse entspricht, den die Operation bearbeiten muss. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Übertragen Sie den Z-Wert der ausgewählten Funktion als Endtiefe für die Operation. @@ -863,14 +863,14 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Tiefe des letzten Schnitts der Bearbeitung. Kann verwendet werden, um eine sauberere Darstellung zu erzeugen. - + Final Depth Endtiefe - + Step Down Zustelltiefe @@ -910,34 +910,34 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Vertikaler Sicherheitsabstand Werkzeug zu Werkstück bei Zwischen- und Verbindungsfahrten - + + + + - - - - + The tool and its settings to be used for this operation. Das Werkzeug und seine Einstellungen, die für diesen Vorgang verwendet werden sollen. + + + + + + + + + + - - - - - - - - - - Coolant Mode Kühlmittelmodus @@ -947,28 +947,28 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all G-Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Werkzeugsteuerung - - + + Coolant Kühlmittel @@ -988,8 +988,8 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Operationstyp - + Step Over Percent Überlappungs-Prozentsatz @@ -1039,8 +1039,8 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Feinbearbeitungsprofil - + Use Outline Kontur verwenden @@ -1095,10 +1095,10 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Stop - + - + Direction Richtung @@ -1108,15 +1108,15 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Die Richtung, in der das Profil ausgeführt wird, im oder gegen den Uhrzeigersinn. - + CW Im Uhrzeigersinn - + CCW Gegen den Uhrzeigersinn @@ -1141,6 +1141,8 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Gehrungsfuge + + @@ -1150,8 +1152,6 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all - - mm mm @@ -1367,11 +1367,11 @@ Reset löscht alle aktuellen Elemente aus der Liste und füllt die Liste mit all Muster + + - - The tool and its settings to be used for this operation @@ -1472,9 +1472,9 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Werkstoffzulassung + - Use Start Point Startpunkt verwenden @@ -1730,9 +1730,9 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Pfadende erweitern - + Layer Mode Ebenenmodus @@ -1772,8 +1772,8 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Scan-Typ - + Cut Pattern Fräsmuster @@ -1788,14 +1788,14 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Letzte X Flächen vermeiden - + Bounding Box Begrenzungsbox - + Select the overall boundary for the operation. Wählen Sie die Gesamtgrenze für die Operation. @@ -1805,14 +1805,14 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Planar: Flacher, 3D-Oberflächen-Scan. Drehbar: Drehbarer 4. ter Achs-Rotations-Scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Die Operation in einem Durchgang der ausgewählten Tiefe durchführen, oder in mehreren Durchgängen bis zur Zieltiefe. - + Set the geometric clearing pattern to use for the operation. Legen Sie das geometrische Räummuster für die Operation fest. @@ -1837,14 +1837,14 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Die Dropcutter-Linien werden parallel zu dieser Achse erstellt. - + Set the Z-axis depth offset from the target surface. Legen Sie den Z-Achsen-Tiefenversatz von der Zieloberfläche fest. - + Set the sampling resolution. Smaller values quickly increase processing time. Setzt die Auflösung der Abtastrate. Kleinere Werte erhöhen schnell die Bearbeitungszeit. @@ -1854,8 +1854,8 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Optimierung linearer Pfade aktivieren (kolineare Punkte). Entfernt unnötige kolineare Punkte aus G-Code-Ausgabe. @@ -1890,28 +1890,28 @@ Letzteres kann zur Deckung der gesamten Lagerfläche verwendet werden, um für d Tiefenversatz - + Step over Einen Schritt weiter - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. Der Betrag, um den das Werkzeug bei jedem Zyklus des Musters seitlich verschoben wird, angegeben in Prozent des Werkzeugdurchmessers. Ein Versatz von 100 % führt zu keiner Überlappung zwischen zwei verschiedenen Zyklen. - + Sample interval Messintervall - + Optimize Linear Paths Lineare Pfade optimieren @@ -2059,8 +2059,8 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Ausrichtung - + Type Typ @@ -2090,8 +2090,8 @@ Standard: "3 mm" - Das Werkzeug sollte in diesem Fall auf Verbindungsfahrten imm Gewindegänge pro Zoll (inch) - + Operation Operation @@ -3012,8 +3012,8 @@ Sollten mehrere Werkzeuge oder Werkzeugformen mit dem gleichen Namen in verschie AxisMap Aufbereitung - + Radius Radius @@ -3428,8 +3428,8 @@ Sollten mehrere Werkzeuge oder Werkzeugformen mit dem gleichen Namen in verschie TaskPathSimulator - + Path Simulator Pfad-Simulator @@ -4321,10 +4321,9 @@ Zum Beispiel: Dies nicht mehr anzeigen - + Edit - int = field(default=None) Bearbeiten @@ -4466,8 +4465,8 @@ Zum Beispiel: Der nicht-planare adaptive Start ist ebenfalls nicht verfügbar. - + %s is not a Base Model object of the job %s %s ist kein Basismodell-Objekt des Jobs %s @@ -4487,8 +4486,8 @@ Zum Beispiel: Gesamtes Modell, ausgewählte Fläche(n) oder ausgewählte Kante(n) profilieren - + Choose a Path Job Einen Path-Auftrag auswählen @@ -4592,6 +4591,7 @@ Zum Beispiel: List of custom property groups + int = field(default=None) Liste benutzerdefinierter Eigenschaftsgruppen @@ -4654,12 +4654,12 @@ Zum Beispiel: + + - - The base path to modify Zu ändernder Basispfad @@ -4953,9 +4953,9 @@ Zum Beispiel: Sammlung aller Werkzeugsteuerungen für den Auftrag + - Operations Cycle Time Estimation Abschätzung der Durchlaufzeit @@ -5040,8 +5040,8 @@ Zum Beispiel: Abstand von der Einspannung - + Make False, to prevent operation from generating code Abwählen, damit die Aktion keinen Code generiert @@ -5061,8 +5061,8 @@ Zum Beispiel: Beeinflusst Genauigkeit und Leistung - + Percent of cutter diameter to step over on each pass Prozentsatz des Fräserdurchmessers, der bei jedem Durchgangzugestellt wird @@ -5238,10 +5238,10 @@ Zum Beispiel: Der Startpunkt dieses Pfades - - - + + + Make True, if specifying a Start Point Auf Wahr setzen, wenn ein Startpunkt angegeben werden soll @@ -5355,9 +5355,9 @@ Zum Beispiel: G99 Rückzug anwenden: Rückzug nur auf RetractHeight zwischen Löchern in dieser Operation - + Additional base objects to be engraved Zusätzliche Basisobjekte, die graviert werden sollen @@ -5398,9 +5398,9 @@ Zum Beispiel: Startradius - + Extra value to stay away from final profile- good for roughing toolpath Aufmaß zum Endprofil - Geeignet für Schruppbearbeitungen @@ -5420,9 +5420,9 @@ Zum Beispiel: Fräsen von erhöhten Bereichen innerhalb der Fläche ausschließen. - - + + Choose how to process multiple Base Geometry features. Wählen Sie, wie mehrere Basisgeometrie Feautures verarbeitet werden sollen. @@ -5443,8 +5443,8 @@ Zum Beispiel: Verarbeite Modell und Rohmaterial in einer Operation, bei der keine Basisgeometrie ausgewählt wurde. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Die Richtung, in der der Werkzeugweg um das Teil herumgeführt werden soll, im Uhrzeigersinn (CW) oder gegen den Uhrzeigersinn (CCW) @@ -5551,8 +5551,8 @@ Zum Beispiel: Aktivieren, falls die Fräsradiuskompensation verwendet wird - + Show the temporary path construction objects when module is in DEBUG mode. Temporäre Wegkonstruktionsobjekte anzeigen, wenn sich das Modul im FEHLERSUCH-Modus befindet. @@ -5568,8 +5568,8 @@ Zum Beispiel: Gib den benutzerdefinierten Endpunkt für die Nut ein. - + Set the geometric clearing pattern to use for the operation. Legen Sie das geometrische Räummuster für die Operation fest. @@ -5585,8 +5585,8 @@ Zum Beispiel: Positiv erweitert das Ende des Pfades, negativ verkürzt ihn. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Die Operation in einem Durchgang der ausgewählten Tiefe durchführen, oder in mehreren Durchgängen bis zur Zieltiefe. @@ -5617,8 +5617,8 @@ Zum Beispiel: Aktivieren, um die Fräsrichtung der Nut umzukehren. - + The custom start point for the path of this operation Der benutzerdefinierte Startpunkt für den Pfad dieser Operation @@ -6132,24 +6132,24 @@ Zum Beispiel: Path_Dressup - + Please select one path object Bitte einen einzelnen Pfad auswählen - + The selected object is not a path Das ausgewählte Objekt ist kein Pfad - + Please select a Path object Bitte wählen Sie ein Pfad-Objekt aus @@ -6306,8 +6306,8 @@ Zum Beispiel: Sondierungspunkedatei wählen - + All Files (*.*) Alle Dateien (*.*) @@ -7038,14 +7038,14 @@ Zum Beispiel: PathProfile - + Outside Außen - + Inside Innen diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index 7daa42ce28..19c3ce3db7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Προσθήκη - - + + Remove Αφαίρεση @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Επαναφορά - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Ελεγκτής Εργαλείων - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Τύπος Λειτουργίας - + Step Over Percent Βήμα Άνω του Ποσοστού @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Ολοκλήρωση Προφίλ - + Use Outline Χρήση Περιγράμματος @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Διακοπή - + - + Direction Κατεύθυνση @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm χιλιοστά @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Μοτίβο + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Πλαίσιο Οριοθέτησης - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Υπέρθεση - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Προσανατολισμός - + Type Τύπος @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Ακτίνα @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Επεξεργασία @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Όλα τα αρχεία (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts index cf2f028456..0cdf7be32b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts @@ -713,17 +713,17 @@ Para material a partir de la caja delimitadora del objeto Base, significa el mat Limpia la lista de geometrías base - + Add Agregar - - + + Remove Eliminar @@ -778,8 +778,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Reiniciar - + All objects will be processed using the same operation properties. Todos los objetos serán procesados usando las mismas propiedades de operación. @@ -824,32 +824,32 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Todas las ubicaciones serán procesadas usando las mismas propiedades de operación. - + Start Depth Profundidad de Inicio - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Profundidad de Inicio de la operación. El punto más alto en el eje Z que la operación debe procesar. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transferir el valor Z de la característica seleccionada como la Profundidad de Inicio para la operación. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. La profundidad de la operación que corresponde al valor más bajo del eje Z que la operación debe procesar. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transferir el valor Z de la característica seleccionada como la Profundidad Final de la operación. @@ -864,14 +864,14 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Profundidad del corte final de la operación. Se puede utilizar para producir un acabado más limpio. - + Final Depth Profundidad Final - + Step Down Bajar @@ -911,34 +911,34 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Altura libre - + + + + - - - - + The tool and its settings to be used for this operation. La herramienta y sus ajustes que se usarán para esta operación. + + + + + + + + + + - - - - - - - - - - Coolant Mode Modo Refrigerante @@ -948,28 +948,28 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co G-Code - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controlador de herramienta - - + + Coolant Refrigerante @@ -989,8 +989,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Tipo de operación - + Step Over Percent Porcentaje de Paso @@ -1040,8 +1040,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Finalizando perfil - + Use Outline Usar Contorno @@ -1096,10 +1096,10 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Parar - + - + Direction Sentido @@ -1109,15 +1109,15 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co La dirección en la que se realiza el perfil, en el sentido de las agujas del reloj o en sentido antihorario. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Junta de inglete + + @@ -1151,8 +1153,6 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co - - mm mm @@ -1368,11 +1368,11 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Patrón + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Permisividad del Material + - Use Start Point Usar Punto Inicial @@ -1731,9 +1731,9 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Extender Ruta Final - + Layer Mode Modo de Capa @@ -1773,8 +1773,8 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Tipo de Escaneo - + Cut Pattern Patrón de corte @@ -1789,14 +1789,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Evitar Últimas X Caras - + Bounding Box Cuadro Delimitador - + Select the overall boundary for the operation. Seleccione el límite general para la operación. @@ -1806,14 +1806,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Planar: plano, escaneo de superficie 3D. Rotacional: Escaneo rotacional del 4º eje. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Completa la operación en una sola pasada a profundidad, o en múltiples pasadas hasta la profundidad final. - + Set the geometric clearing pattern to use for the operation. Establece el patrón de limpieza geométrica para usar en la operación. @@ -1838,14 +1838,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Las líneas de corte se crean paralelas a este eje. - + Set the Z-axis depth offset from the target surface. Define el desplazamiento de profundidad del eje Z desde la superficie objetivo. - + Set the sampling resolution. Smaller values quickly increase processing time. Establece la resolución de muestreo. Los valores más pequeños aumentan rápidamente el tiempo de procesamiento. @@ -1855,8 +1855,8 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Marcar como verdadero, si se especifica un punto inicial - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Habilitar la optimización de trayectorias lineales (puntos colineales). Elimina puntos colineales innecesarios a partir del código de salida. @@ -1891,14 +1891,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Desplazamiento de profundidad - + Step over Pasar al siguiente - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. Un paso por encima del 100% da como resultado que no haya superposición entre dos ciclos diferentes. - + Sample interval Intervalo de Muestra - + Optimize Linear Paths Optimizar Rutas Lineales @@ -2062,8 +2062,8 @@ Por defecto: 3 mm Orientación - + Type Tipo @@ -2093,8 +2093,8 @@ Por defecto: 3 mm TPI - + Operation Operación @@ -3015,8 +3015,8 @@ Si existen múltiples herramientas o formas de herramientas con el mismo nombre Revestido de EjesMapa - + Radius Radio @@ -3431,8 +3431,8 @@ Si existen múltiples herramientas o formas de herramientas con el mismo nombre TaskPathSimulator - + Path Simulator Simulador de Ruta @@ -4319,10 +4319,9 @@ Por ejemplo: No mostrar más - + Edit - int = field(default=None) Editar @@ -4464,8 +4463,8 @@ Por ejemplo: El inicio adaptativo no-planar tampoco está disponible. - + %s is not a Base Model object of the job %s %s no es un objeto de modelo base del trabajo %s @@ -4485,8 +4484,8 @@ Por ejemplo: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Choose a Path Job Elegir una Ruta de Trabajo @@ -4590,6 +4589,7 @@ Por ejemplo: List of custom property groups + int = field(default=None) Lista de grupos de propiedades personalizados @@ -4652,12 +4652,12 @@ Por ejemplo: + + - - The base path to modify La trayectoria base a modificar @@ -4951,9 +4951,9 @@ Por ejemplo: Colección de todos los controladores de herramientas para el trabajo + - Operations Cycle Time Estimation Estimación del tiempo del ciclo de operaciones @@ -5038,8 +5038,8 @@ Por ejemplo: Número de desfase de la fijación - + Make False, to prevent operation from generating code Marcar como falso, para evitar que la operación genere código @@ -5059,8 +5059,8 @@ Por ejemplo: Precisión y rendimiento de influencias - + Percent of cutter diameter to step over on each pass Porcentaje de diámetro de corte a escalar en cada pasada @@ -5236,10 +5236,10 @@ Por ejemplo: Punto de partida de esta trayectoria - - - + + + Make True, if specifying a Start Point Marcar como verdadero, si se especifica un punto inicial @@ -5353,9 +5353,9 @@ Por ejemplo: Aplicación de retracción G99: retraer el valor de altura de retracción solo entre los agujeros de la operación - + Additional base objects to be engraved Objetos base adicionales para ser grabados @@ -5396,9 +5396,9 @@ Por ejemplo: Radio inicial - + Extra value to stay away from final profile- good for roughing toolpath Valor adicional que lo mantiene alejado del perfil de cierre: bueno para el movimiento de la herramienta de desbaste @@ -5418,9 +5418,9 @@ Por ejemplo: Excluir las zonas de fresado ascendente dentro de la cara. - - + + Choose how to process multiple Base Geometry features. Elija cómo procesar múltiples características de Geometría Base. @@ -5441,8 +5441,8 @@ Por ejemplo: Procese el modelo y el stock en una operación sin geometría base seleccionada. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) La dirección en la que la trayectoria de herramienta debe ir alrededor de la pieza sentido horario (CW) o sentido antihorario (CCW) @@ -5549,8 +5549,8 @@ Por ejemplo: Hacer verdadero, si se utiliza la compensación de radio de corte - + Show the temporary path construction objects when module is in DEBUG mode. Mostrar los objetos temporales de construcción de trayectorias cuando el módulo está en modo DEBUG. @@ -5566,8 +5566,8 @@ Por ejemplo: Introduzca el punto final personalizado para la trayectoria del hueco. - + Set the geometric clearing pattern to use for the operation. Establece el patrón de limpieza geométrica para usar en la operación. @@ -5583,8 +5583,8 @@ Por ejemplo: Un valor positivo extiende el final de la trayectoria, un valor negativo la acorta. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Completa la operación en una sola pasada a profundidad, o en múltiples pasadas hasta la profundidad final. @@ -5615,8 +5615,8 @@ Por ejemplo: Activar para invertir la dirección de corte de la trayectoria de la ranura. - + The custom start point for the path of this operation El punto de inicio personalizado para la trayectoria de esta operación @@ -6131,24 +6131,24 @@ Por ejemplo: Path_Dressup - + Please select one path object Por favor seleccione un objeto de trayectoria - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Path object Por favor seleccione un objeto de trayectoria @@ -6305,8 +6305,8 @@ Por ejemplo: Seleccionar archivo de punto de sonda - + All Files (*.*) Todos los archivos (*.*) @@ -7037,14 +7037,14 @@ Por ejemplo: PathProfile - + Outside Fuera - + Inside Interior diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index fff2716ed9..c4aa839507 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -713,17 +713,17 @@ Para material a partir de la caja delimitadora del objeto Base, significa el mat Limpia la lista de geometrías base - + Add Añadir - - + + Remove Quitar @@ -778,8 +778,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Reiniciar - + All objects will be processed using the same operation properties. Todos los objetos serán procesados usando las mismas propiedades de operación. @@ -824,32 +824,32 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Todas las ubicaciones serán procesadas usando las mismas propiedades de operación. - + Start Depth Profundidad de Inicio - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Profundidad de Inicio de la operación. El punto más alto en el eje Z que la operación debe procesar. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transferir el valor Z de la característica seleccionada como la Profundidad de Inicio para la operación. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. La profundidad de la operación que corresponde al valor más bajo del eje Z que la operación debe procesar. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transferir el valor Z de la característica seleccionada como la Profundidad Final de la operación. @@ -864,14 +864,14 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Profundidad del corte final de la operación. Se puede utilizar para producir un acabado más limpio. - + Final Depth Profundidad Final - + Step Down Bajar @@ -911,34 +911,34 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Altura libre - + + + + - - - - + The tool and its settings to be used for this operation. La herramienta y sus ajustes que se usarán para esta operación. + + + + + + + + + + - - - - - - - - - - Coolant Mode Modo Refrigerante @@ -948,28 +948,28 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co G-Code - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controlador de herramienta - - + + Coolant Refrigerante @@ -989,8 +989,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Tipo de operación - + Step Over Percent Porcentaje de Paso @@ -1040,8 +1040,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Finalizando perfil - + Use Outline Usar Contorno @@ -1096,10 +1096,10 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Parar - + - + Direction Dirección @@ -1109,15 +1109,15 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co La dirección en la que se realiza el perfil, en el sentido de las agujas del reloj o en sentido antihorario. - + CW CW - + CCW Sentido antihorario @@ -1142,6 +1142,8 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Junta de inglete + + @@ -1151,8 +1153,6 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co - - mm mm @@ -1368,11 +1368,11 @@ Restablecer elimina todos los elementos actuales de la lista y llena la lista co Patrón + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Permisividad del Material + - Use Start Point Usar Punto Inicial @@ -1731,9 +1731,9 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Extender Ruta Final - + Layer Mode Modo de Capa @@ -1773,8 +1773,8 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Tipo de Escaneo - + Cut Pattern Patrón de corte @@ -1789,14 +1789,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Evitar Últimas X Caras - + Bounding Box Cuadro Delimitador - + Select the overall boundary for the operation. Seleccione el límite general para la operación. @@ -1806,14 +1806,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Planar: plano, escaneo de superficie 3D. Rotacional: Escaneo rotacional del 4º eje. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Completa la operación en una sola pasada a profundidad, o en múltiples pasadas hasta la profundidad final. - + Set the geometric clearing pattern to use for the operation. Establece el patrón de limpieza geométrica para usar en la operación. @@ -1838,14 +1838,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Las líneas de corte se crean paralelas a este eje. - + Set the Z-axis depth offset from the target surface. Define el desplazamiento de profundidad del eje Z desde la superficie objetivo. - + Set the sampling resolution. Smaller values quickly increase processing time. Establece la resolución de muestreo. Los valores más pequeños aumentan rápidamente el tiempo de procesamiento. @@ -1855,8 +1855,8 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Marcar como verdadero, si se especifica un punto inicial - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Habilitar la optimización de trayectorias lineales (puntos colineales). Elimina puntos colineales innecesarios a partir del código de salida. @@ -1891,14 +1891,14 @@ Este último se puede utilizar para hacer frente a todo el área de stock para a Desplazamiento de profundidad - + Step over Pasar al siguiente - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. Un paso por encima del 100% da como resultado que no haya superposición entre dos ciclos diferentes. - + Sample interval Intervalo de Muestra - + Optimize Linear Paths Optimizar Rutas Lineales @@ -2062,8 +2062,8 @@ Por defecto: 3 mm Orientación - + Type Tipo @@ -2093,8 +2093,8 @@ Por defecto: 3 mm TPI - + Operation Operación @@ -3015,8 +3015,8 @@ Si existen múltiples herramientas o formas de herramientas con el mismo nombre Revestido de EjesMapa - + Radius Radio @@ -3431,8 +3431,8 @@ Si existen múltiples herramientas o formas de herramientas con el mismo nombre TaskPathSimulator - + Path Simulator Simulador de Ruta @@ -4319,10 +4319,9 @@ Por ejemplo: No mostrar más - + Edit - int = field(default=None) Editar @@ -4464,8 +4463,8 @@ Por ejemplo: El inicio adaptativo no-planar tampoco está disponible. - + %s is not a Base Model object of the job %s %s no es un objeto de modelo base del trabajo %s @@ -4485,8 +4484,8 @@ Por ejemplo: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Choose a Path Job Elegir una Ruta de Trabajo @@ -4590,6 +4589,7 @@ Por ejemplo: List of custom property groups + int = field(default=None) Lista de grupos de propiedades personalizados @@ -4652,12 +4652,12 @@ Por ejemplo: + + - - The base path to modify La trayectoria base a modificar @@ -4951,9 +4951,9 @@ Por ejemplo: Colección de todos los controladores de herramientas para el trabajo + - Operations Cycle Time Estimation Estimación del tiempo del ciclo de operaciones @@ -5038,8 +5038,8 @@ Por ejemplo: Número de desfase de la fijación - + Make False, to prevent operation from generating code Marcar como falso, para evitar que la operación genere código @@ -5059,8 +5059,8 @@ Por ejemplo: Precisión y rendimiento de influencias - + Percent of cutter diameter to step over on each pass Porcentaje de diámetro de corte a escalar en cada pasada @@ -5236,10 +5236,10 @@ Por ejemplo: Punto de partida de esta trayectoria - - - + + + Make True, if specifying a Start Point Marcar como verdadero, si se especifica un punto inicial @@ -5353,9 +5353,9 @@ Por ejemplo: Aplicación de retracción G99: retraer el valor de altura de retracción solo entre los agujeros de la operación - + Additional base objects to be engraved Objetos base adicionales para ser grabados @@ -5396,9 +5396,9 @@ Por ejemplo: Radio inicial - + Extra value to stay away from final profile- good for roughing toolpath Valor adicional que lo mantiene alejado del perfil de cierre: bueno para el movimiento de la herramienta de desbaste @@ -5418,9 +5418,9 @@ Por ejemplo: Excluir las zonas de fresado ascendente dentro de la cara. - - + + Choose how to process multiple Base Geometry features. Elija cómo procesar múltiples características de Geometría Base. @@ -5441,8 +5441,8 @@ Por ejemplo: Procese el modelo y el stock en una operación sin geometría base seleccionada. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) La dirección en la que la trayectoria de herramienta debe ir alrededor de la pieza sentido horario (CW) o sentido antihorario (CCW) @@ -5549,8 +5549,8 @@ Por ejemplo: Hacer verdadero, si se utiliza la compensación de radio de corte - + Show the temporary path construction objects when module is in DEBUG mode. Mostrar los objetos temporales de construcción de trayectorias cuando el módulo está en modo DEBUG. @@ -5566,8 +5566,8 @@ Por ejemplo: Introduzca el punto final personalizado para la trayectoria del hueco. - + Set the geometric clearing pattern to use for the operation. Establece el patrón de limpieza geométrica para usar en la operación. @@ -5583,8 +5583,8 @@ Por ejemplo: Un valor positivo extiende el final de la trayectoria, un valor negativo la acorta. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Completa la operación en una sola pasada a profundidad, o en múltiples pasadas hasta la profundidad final. @@ -5615,8 +5615,8 @@ Por ejemplo: Activar para invertir la dirección de corte de la trayectoria de la ranura. - + The custom start point for the path of this operation El punto de inicio personalizado para la trayectoria de esta operación @@ -6131,24 +6131,24 @@ Por ejemplo: Path_Dressup - + Please select one path object Por favor seleccione un objeto de trayectoria - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Path object Por favor seleccione un objeto de trayectoria @@ -6305,8 +6305,8 @@ Por ejemplo: Seleccionar archivo de punto de sonda - + All Files (*.*) Todos los archivos (*.*) @@ -7037,14 +7037,14 @@ Por ejemplo: PathProfile - + Outside Fuera - + Inside Interior diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index b95671fa1f..d5e9b80c78 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -713,17 +713,17 @@ Oinarri-objektuaren muga-kutxatik eratorritako piezari dagokionez, esan nahi du Oinarri-geometrien zerrenda garbitzen du - + Add Gehitu - - + + Remove Kendu @@ -778,8 +778,8 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Berrezarri - + All objects will be processed using the same operation properties. Objektu guztiak eragiketa-propietate berak erabilita prozesatuko dira. @@ -824,32 +824,32 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Kokapen guztiak eragiketa-propietate berak erabilita prozesatuko dira. - + Start Depth Hasierako sakonera - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Eragiketaren hasierako sakonera. Eragiketak Z ardatzean prozesatu behar duen punturik altuena. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transferitu hautatutako elementuaren Z balioa eragiketaren hasierako sakonerara. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Eragiketaren sakonera, eragiketak Z ardatzean prozesatu behar duen punturik baxuenari dagokiona. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transferitu hautatutako elementuaren Z balioa eragiketaren amaierako sakonerara. @@ -864,14 +864,14 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Eragiketaren azken moztearen sakonera. Amaiera garbiagoa sortzeko erabili daiteke. - + Final Depth Amaierako sakonera - + Step Down Beheratzea @@ -911,34 +911,34 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Altuera librea - + + + + - - - - + The tool and its settings to be used for this operation. Eragiketa honetan erabiliko den tresna eta bere ezarpenak. + + + + + + + + + + - - - - - - - - - - Coolant Mode Hozgarri-modua @@ -948,28 +948,28 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tresna-kontrolagailua - - + + Coolant Hozgarria @@ -989,8 +989,8 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Eragiketa mota - + Step Over Percent Gainditze-ehunekoa @@ -1040,8 +1040,8 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Amaierako profila - + Use Outline Erabili eskema @@ -1096,10 +1096,10 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Gelditu - + - + Direction Norabidea @@ -1109,15 +1109,15 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Profila sortzeko erabiliko den den norabidea, erloju-orratzen noranzkoan edo aurka. - + CW erlojuaren noranzkoan - + CCW erlojuaren noranzkoaren aurka @@ -1142,6 +1142,8 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Elkargune zorrotza + + @@ -1151,8 +1153,6 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E - - mm mm @@ -1368,11 +1368,11 @@ Prozesatuko diren elementuak gehitzeko, hautatu elementua eta sakatu 'Gehitu'. E Eredua + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Material-perdoia + - Use Start Point Erabili hasiera-puntua @@ -1731,9 +1731,9 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Luzatu bidearen amaiera - + Layer Mode Geruza-modua @@ -1773,8 +1773,8 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Eskaneatze mota - + Cut Pattern Mozte-eredua @@ -1789,14 +1789,14 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Saihestu azken X aurpegiak - + Bounding Box Muga-kutxa - + Select the overall boundary for the operation. Hautatu eragiketarako muga orokorra. @@ -1806,14 +1806,14 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Planarra: Laua, 3D gainazal eskaneatzea. Birakaria: 4. ardatzeko eskaneatze birakaria. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Osatu eragiketa pasaldi bakarrean sakoneran, edo pasaldi anitzetan azken sakoneraraino. - + Set the geometric clearing pattern to use for the operation. Ezarri eragiketarako erabiliko den garbitze geometrikoko eredua. @@ -1838,14 +1838,14 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Erortze-ebakigailuaren lerroak ardatz honen paraleloan sortzen dira. - + Set the Z-axis depth offset from the target surface. Ezarri Z ardatzeko sakonera-desplazamendua helburuko gainazaletik. - + Set the sampling resolution. Smaller values quickly increase processing time. Ezarri laginketa-bereizmena. Balio txikiagoak prozesatze-denbora asko handitzen dute. @@ -1855,8 +1855,8 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Markatu 'Egia', hasierako puntu bat adieraziko bada - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Gaitu bide linealen optimizazioa (puntu lerrokideak). Beharrezkoak ez diren puntu lerrokideak kentzen ditu G-code irteeratik. @@ -1891,14 +1891,14 @@ Azken aukera pieza gordinaren area osoaren aurpegirako erabili daiteke, hurrengo Sakoneraren desplazamendua - + Step over Urrats bat aurrera - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. Gainditzea % 100ekoa bada, ez da gainjartzerik egongo zikloen artean. - + Sample interval Lagin-tartea - + Optimize Linear Paths Optimizatu bide linealak @@ -2062,8 +2062,8 @@ Balio lehenetsia: 3 mm Orientazioa - + Type Mota @@ -2093,8 +2093,8 @@ Balio lehenetsia: 3 mm TPI - + Operation Eragiketa @@ -3015,8 +3015,8 @@ Izen bera duten tresna edo tresna-forma anitz badaude direktorio desberdinetan, Ardatz-maparen jantzia - + Radius Erradioa @@ -3431,8 +3431,8 @@ Izen bera duten tresna edo tresna-forma anitz badaude direktorio desberdinetan, TaskPathSimulator - + Path Simulator Bide-simulatzailea @@ -4322,10 +4322,9 @@ For example: Ez erakutsi berriro - + Edit - int = field(default=None) Editatu @@ -4467,8 +4466,8 @@ For example: Hasiera moldakor ez planarra ere ez dago erabilgarri. - + %s is not a Base Model object of the job %s %s ez da oinarri-ereduen objektua %s lanerako @@ -4488,8 +4487,8 @@ For example: Profilatu eredu osoa, aurpegi hautatua(k) edo ertz hautatua(k) - + Choose a Path Job Aukeratu bide-lan bat @@ -4593,6 +4592,7 @@ For example: List of custom property groups + int = field(default=None) Propietate-talde pertsonalizatuen zerrenda @@ -4655,12 +4655,12 @@ For example: + + - - The base path to modify Aldatuko den oinarri-bidea @@ -4954,9 +4954,9 @@ For example: Lanerako tresna-kontrolagailu guztien bilduma + - Operations Cycle Time Estimation Eragiketen ziklo-denboraren kalkulua @@ -5041,8 +5041,8 @@ For example: Finkapen-desplazamenduen kopurua - + Make False, to prevent operation from generating code Markatu 'Faltsua', eragiketak koderik sortu dezan saihestu nahi baduzu @@ -5062,8 +5062,8 @@ For example: Zehaztasunean eta errendimenduan eragina du - + Percent of cutter diameter to step over on each pass Igaroaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den @@ -5239,10 +5239,10 @@ For example: Bide honen hasiera-puntua - - - + + + Make True, if specifying a Start Point Markatu 'Egia', hasierako puntu bat adieraziko bada @@ -5356,9 +5356,9 @@ For example: Aplikatu G99 atzeratzea: eragiketa honetan, zuloen arteko atzeratze-altueraraino soilik atzeratu - + Additional base objects to be engraved Grabatuko diren oinarri-objektu gehigarriak @@ -5399,9 +5399,9 @@ For example: Hasierako erradioa - + Extra value to stay away from final profile- good for roughing toolpath Amaierako profiletik aldentzeko balio gehigarria - ona arbastatzeko tresna-bidearentzako @@ -5421,9 +5421,9 @@ For example: Baztertu aurpegi barruan igotako areak. - - + + Choose how to process multiple Base Geometry features. Aukeratu nola prozesatuko diren oinarri-geometriako elementu anitz. @@ -5444,8 +5444,8 @@ For example: Prozesatu eredua eta pieza oinarri-geometriarik hautatuta ez duen eragiketa batean. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan (CW), edo aurka (CCW) @@ -5552,8 +5552,8 @@ For example: Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada - + Show the temporary path construction objects when module is in DEBUG mode. Erakutsi aldi baterako bide-eraikuntzaren objektuak modulua ARAZKETA moduan dagoenean. @@ -5569,8 +5569,8 @@ For example: Sartu amaiera-puntu pertsonalizatua arteka-biderako. - + Set the geometric clearing pattern to use for the operation. Ezarri eragiketarako erabiliko den garbitze geometrikoko eredua. @@ -5586,8 +5586,8 @@ For example: Balio positiboak bidearen amaiera luzatzen du, negatiboak laburtu egiten du. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Osatu eragiketa pasaldi bakarrean sakoneran, edo pasaldi anitzetan azken sakoneraraino. @@ -5618,8 +5618,8 @@ For example: Gaitu arteka-bidearen mozte-norabidea alderantzikatzea. - + The custom start point for the path of this operation Eragiketa honen bidearen hasiera-puntu pertsonalizatua @@ -6134,24 +6134,24 @@ For example: Path_Dressup - + Please select one path object Hautatu bide-objektu bat - + The selected object is not a path Hautatutako objektua ez da bide bat - + Please select a Path object Hautatu bide-objektu bat @@ -6308,8 +6308,8 @@ For example: Hautatu haztatze-puntuen fitxategia - + All Files (*.*) Fitxategi guztiak (*.*) @@ -7039,14 +7039,14 @@ For example: PathProfile - + Outside Kanpoan - + Inside Barruan diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index 38c93efde9..93c30b4034 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Lisää - - + + Remove Poista @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Palauta - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Pysäytä - + - + Direction Suunta @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Askella yli - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Suunta - + Type Tyyppi @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Säde @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Muokkaa @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Kaikki tiedostot (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index ad42e6ffac..c22a4027a1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -713,17 +713,17 @@ Pour le brut provenant de la boîte englobante de l'objet de base, il s'agit du Effacer la liste des géométries de base - + Add Ajouter - - + + Remove Supprimer @@ -778,15 +778,15 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Réinitialiser - + All objects will be processed using the same operation properties. Tous les objets seront traités en utilisant les mêmes propriétés. List of locations to be processed. - Liste des emplacements à traiter. + Liste des positions à traiter. @@ -801,17 +801,17 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Opens a dialog to add arbitrary locations. - Ouvrir une boîte de dialogue pour ajouter des emplacements arbitraires. + Ouvrir une boîte de dialogue pour ajouter des positions arbitraires. Remove selected location from the list. The operation is no longer applied to them. - Supprimer l'emplacement sélectionné de la liste. L'opération ne lui est plus appliquée. + Supprimer la position sélectionnée de la liste. L'opération ne lui est plus appliquée. Edit selected location. - Modifier l'emplacement sélectionné. + Modifier la position sélectionnée. @@ -821,35 +821,35 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l All locations will be processed using the same operation properties. - Tous les emplacements seront traités en utilisant les mêmes propriétés d'opération. + Toutes les positions seront traitées en utilisant les mêmes propriétés d'opération. - + Start Depth Profondeur de départ - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Profondeur de départ de l'opération. Le point le plus élevé de l'axe Z que l'opération doit traiter. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Utiliser la valeur Z de l'élément sélectionné comme profondeur de départ pour l'opération. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. La profondeur de l'opération qui correspond à la valeur la plus basse selon l'axe Z que l'opération doit traiter. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Utiliser la valeur Z de l'élément sélectionné comme profondeur finale pour l'opération. @@ -864,14 +864,14 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Profondeur de la dernière coupe de l'opération. Peut être utilisé pour produire une finition plus propre. - + Final Depth Profondeur finale - + Step Down Pas de descente @@ -911,34 +911,34 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Hauteur de dégagement - + + + + - - - - + The tool and its settings to be used for this operation. L'outil et ses paramètres à utiliser pour cette opération. + + + + + + + + + + - - - - - - - - - - Coolant Mode Mode de refroidissement @@ -948,28 +948,28 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Contrôleur d'outil - - + + Coolant Liquide de refroidissement @@ -989,8 +989,8 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Type d'opération - + Step Over Percent Pourcentage de recouvrement @@ -1040,8 +1040,8 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Profil de finition - + Use Outline Utiliser le contour @@ -1096,10 +1096,10 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Arrêter - + - + Direction Direction @@ -1109,15 +1109,15 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Le sens dans lequel le profil est effectué, sens des aiguilles d'une montre ou sens inverse. - + CW Sens horaire - + CCW dans le sens contraire des aiguilles d'une montre @@ -1142,6 +1142,8 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Joint onglet + + @@ -1151,8 +1153,6 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l - - mm mm @@ -1368,11 +1368,11 @@ Réinitialiser supprime tous les éléments en cours de la liste et remplit la l Motif + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Allocation de matériau + - Use Start Point Utiliser le point de départ @@ -1547,7 +1547,7 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Specify if the profile should be performed inside or outside the base geometry features. This only matters if Use Compensation is checked (the default) - Spécifier si le profil doit être effectué à l'intérieur ou à l'extérieur des fonctions de la géométrie de base. Cela ne compte que si la compensation d'utilisation est vérifiée (par défaut) + Spécifier si le profil doit être effectué à l'intérieur ou à l'extérieur des fonctions de la géométrie de base. Cela ne compte que si Utiliser la compensation est cochée (par défaut). @@ -1578,7 +1578,8 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin If checked the profile operation is offset by the tool radius. The offset direction is determined by the Cut Side - Si cette case est cochée, l'opération de profilage est décalée du rayon de l'outil. La direction du décalage est déterminée par le côté de la coupe + Si cette option est cochée, l'opération de profilage sera décalée du rayon de l'outil. +La direction du décalage est déterminée par le côté de la coupe. @@ -1598,7 +1599,7 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Use Compensation - Utilisez la compensation + Utiliser la compensation @@ -1731,9 +1732,9 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Prolonger la fin du parcours - + Layer Mode Mode couche @@ -1773,8 +1774,8 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Type de scan - + Cut Pattern Découpez le motif @@ -1789,14 +1790,14 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Éviter les X dernières faces - + Bounding Box Boîte englobante - + Select the overall boundary for the operation. Sélectionner la limite globale pour l’opération. @@ -1806,14 +1807,14 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Planaire : balayage surfacique plat et 3D. Rotationnel : balayage rotatif sur le 4ème axe. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Terminer l’opération en une seule passe à la profondeur ou en plusieurs passes jusqu’à la profondeur finale. - + Set the geometric clearing pattern to use for the operation. Définir le motif de détourage géométrique à utiliser pour l'opération. @@ -1838,14 +1839,14 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Des lignes de découpe sont créées parallèlement à cet axe. - + Set the Z-axis depth offset from the target surface. Définir le décalage en profondeur de l'axe Z par rapport à la surface cible. - + Set the sampling resolution. Smaller values quickly increase processing time. Définir la résolution d'échantillonnage. Des valeurs plus petites augmentent rapidement le temps de traitement. @@ -1855,8 +1856,8 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Mettre à vrai si l'on spécifie un point de départ - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Activer l'optimisation des parcours linéaires (points colinéaires). Supprime les points colinéaires inutiles de la sortie G-code. @@ -1891,14 +1892,14 @@ Ce dernier peut être utilisé pour surfacer l'ensemble de la zone du brut afin Déport de profondeur - + Step over Passer outre - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1908,14 @@ A step over of 100% results in no overlap between two different cycles. Un recouvrement de 100% n'entraîne aucun chevauchement entre deux cycles différents. - + Sample interval Intervalle d'échantillonnage - + Optimize Linear Paths Optimiser les parcours linéaires @@ -2062,8 +2063,8 @@ Par défaut : 3 mm Orientation - + Type Type @@ -2093,8 +2094,8 @@ Par défaut : 3 mm TPI - + Operation Opération @@ -3014,8 +3015,8 @@ Généralement, il est recommandé d'utiliser des chemins relatifs en raison de Finition de l'assigner de l'axe - + Radius Rayon @@ -3163,7 +3164,7 @@ Généralement, il est recommandé d'utiliser des chemins relatifs en raison de <html><head/><body><p>List of bone locations (with all bones at that location) that are part of this dressup. The list is determined by the corners in the profile and the selected <span style=" font-weight:600;">Side</span> for the bones. </p><p>You can <span style=" font-weight:600;">un-check</span> the bones you don't want to be dressed up.</p><p>If a bone is <span style=" font-weight:600;">grayed out</span> it means that it is already dressed up by a previous dressup. Or put another way, if you dress up this dogobone dressup again you will only be able to select the bones that are un-checked here.</p><p>If this list is empty it probably means you're trying to create bones on the wrong side of the profile.</p></body></html> - <html><head/><body><p>Liste des emplacements des dégagements d'angle (avec tous les dégagements d'angle à cet emplacement) qui font partie de cette finition. La liste est déterminée par les coins du profil et le <span style=" font-weight:600;">côté</span> côté sélectionné pour les dégagements d'angle. </p><p>Vous pouvez <span style=" font-weight:600;">décocher</span> les dégagements d'angle que vous ne voulez pas parachever.</p><p>Si un dégagement d'angle est <span style=" font-weight:600;">grisé</span> cela signifie qu'il est déjà parachevé par une précédente finition. En d'autres termes, si vous effectuez une nouvelle finition à ce dégagement d'angle, vous ne pourrez sélectionner que les dégagements d'angle qui ne sont pas cochés ici.</p><p>Si cette liste est vide, cela signifie probablement que vous essayez de créer des dégagements d'angle du mauvais côté du profil.</p></body></html> + <html><head/><body><p>Liste des positions des dégagements d'angle (avec tous les dégagements d'angle à cet emplacement) qui font partie de cette finition. La liste est déterminée par les coins du profil et le <span style=" font-weight:600;">côté</span> côté sélectionné pour les dégagements d'angle. </p><p>Vous pouvez <span style=" font-weight:600;">décocher</span> les dégagements d'angle que vous ne voulez pas parachever.</p><p>Si un dégagement d'angle est <span style=" font-weight:600;">grisé</span> cela signifie qu'il est déjà parachevé par une précédente finition. En d'autres termes, si vous effectuez une nouvelle finition à ce dégagement d'angle, vous ne pourrez sélectionner que les dégagements d'angle qui ne sont pas cochés ici.</p><p>Si cette liste est vide, cela signifie probablement que vous essayez de créer des dégagements d'angle du mauvais côté du profil.</p></body></html> @@ -3430,8 +3431,8 @@ Généralement, il est recommandé d'utiliser des chemins relatifs en raison de TaskPathSimulator - + Path Simulator Simulateur de parcours @@ -4318,10 +4319,9 @@ Par exemple : Ne plus afficher ceci dorénavant - + Edit - int = field(default=None) Éditer @@ -4463,8 +4463,8 @@ Par exemple : Le démarrage adaptatif non-planaire est également indisponible. - + %s is not a Base Model object of the job %s %s n’est pas un objet Modèle de base de la tâche %s @@ -4484,8 +4484,8 @@ Par exemple : Opération de contournage sur l'intégralité du modèle, d'une/des face(s) sélectionnée(s) ou d'une/des arête(s) sélectionnée(s) - + Choose a Path Job Choisir une tâche Path @@ -4589,6 +4589,7 @@ Par exemple : List of custom property groups + int = field(default=None) Liste des groupes de propriétés personnalisées @@ -4651,12 +4652,12 @@ Par exemple : + + - - The base path to modify Le parcours de base à modifier @@ -4728,7 +4729,7 @@ Par exemple : Locations of inserted holding tags - Emplacements des attaches insérées + Positions des attaches insérées @@ -4950,9 +4951,9 @@ Par exemple : Liste de tous les contrôleurs d'outils pour la tâche + - Operations Cycle Time Estimation Estimation du temps de cycle des opérations @@ -5037,8 +5038,8 @@ Par exemple : Nombre de décalages des fixations - + Make False, to prevent operation from generating code Mettre à faux pour empêcher l'opération de générer du code @@ -5058,8 +5059,8 @@ Par exemple : Influence sur la précision et les performances - + Percent of cutter diameter to step over on each pass Pourcentage du diamètre de l'outil de coupe à recouvrir à chaque passe @@ -5180,7 +5181,7 @@ Par exemple : Base locations for this operation - Emplacements de base pour cette opération + Positions de base pour cette opération @@ -5227,7 +5228,7 @@ Par exemple : Rapid Safety Height between locations. - Hauteur de sécurité rapide entre les emplacements. + Hauteur de sécurité rapide entre les positions. @@ -5235,10 +5236,10 @@ Par exemple : Le point de départ de cette trajectoire - - - + + + Make True, if specifying a Start Point Mettre à vrai si l'on spécifie un point de départ @@ -5352,9 +5353,9 @@ Par exemple : Appliquer la rétraction G99 : ne rétracter que jusqu'à la hauteur de rétraction entre les trous lors de cette opération - + Additional base objects to be engraved Objets de base supplémentaires à graver @@ -5395,9 +5396,9 @@ Par exemple : Rayon de départ - + Extra value to stay away from final profile- good for roughing toolpath Valeur supplémentaire pour rester loin du contour définitif - utile pour les parcours d'ébauche @@ -5417,9 +5418,9 @@ Par exemple : Exclure des zones de fraisage à l'intérieur de la surface. - - + + Choose how to process multiple Base Geometry features. Choisir comment traiter plusieurs fonctions de géométrie de base. @@ -5440,8 +5441,8 @@ Par exemple : Traiter le modèle et le brut dans une opération sans géométrie de base sélectionnée. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Sens du parcours des outils autour de la pièce dans le sens horaire ou le sens anti-horaire @@ -5510,7 +5511,7 @@ Par exemple : The output location for the probe data to be written - Emplacement de sortie pour l'écriture des données de la sonde + Position de sortie pour l'écriture des données de la sonde @@ -5548,8 +5549,8 @@ Par exemple : Marquer Vrai, si vous utilisez la compensation du rayon de coupe - + Show the temporary path construction objects when module is in DEBUG mode. Afficher les objets de construction des parcours temporaires lorsque le module est en mode DEBUG. @@ -5565,8 +5566,8 @@ Par exemple : Entrez un point de fin personnalisé pour le parcours de la rainure. - + Set the geometric clearing pattern to use for the operation. Définir le motif de détourage géométrique à utiliser pour l'opération. @@ -5582,8 +5583,8 @@ Par exemple : Positif prolonge la fin du parcours, négatif le raccourcit. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Terminer l’opération en une seule passe à la profondeur ou en plusieurs passes jusqu’à la profondeur finale. @@ -5614,8 +5615,8 @@ Par exemple : Activez pour inverser la direction de coupe du parcours de la rainure. - + The custom start point for the path of this operation Le point de départ personnalisé pour le parcours de cette opération @@ -5737,7 +5738,7 @@ Par exemple : Choose location of the center point for starting the cut pattern. - Choisir l'emplacement du point central pour le démarrage du motif de coupe. + Choisir la position du point central pour le démarrage du motif de coupe. @@ -6130,24 +6131,24 @@ Par exemple : Path_Dressup - + Please select one path object Veuillez sélectionner un parcours - + The selected object is not a path L'objet sélectionné n'est pas un chemin - + Please select a Path object Veuillez sélectionner un objet de Path @@ -6304,8 +6305,8 @@ Par exemple : Sélectionner le fichier de points de la sonde - + All Files (*.*) Tous les fichiers (*.*) @@ -7035,14 +7036,14 @@ Les valeurs seront converties dans l'unité souhaitée pendant le post-traitemen PathProfile - + Outside Extérieur - + Inside Intérieur @@ -8008,7 +8009,7 @@ Les valeurs seront converties dans l'unité souhaitée pendant le post-traitemen Base Location - Emplacement de base + Position de base @@ -8402,7 +8403,7 @@ Abandon de la création de l'opération Copy example files to new {} directory? - Copier les fichiers d'exemple dans le nouveau dossier {} ? + Copier les fichiers des exemples dans le nouveau répertoire {} ? diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index 323ddbce35..7fb4ec6d5d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Engadir - - + + Remove Rexeitar @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Restaurar - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Ferramenta de control - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Parar - + - + Direction Dirección @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Un paso fóra - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientación - + Type Tipo @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operación @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radio @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Editar @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Tódolos ficheiros (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 54ba204863..0b2cea3e89 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -715,17 +715,17 @@ Za materijal obrade iz graničnog okvira to znači dodatni materijal u svim smje Izbriši listu osnovnih geometrija - + Add Dodaj - - + + Remove Ukloniti @@ -782,8 +782,8 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Odbaci - + All objects will be processed using the same operation properties. Svi objekti obraditi će se koristeći iste postavke operacija. @@ -828,32 +828,32 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Sve lokacije obraditi će se koristeći iste postavke operacija. - + Start Depth Početna dubina - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Dubina početka operacije. Najviša točka u Z-osi koju operacija treba obraditi. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Prenesite Z vrijednost odabrane značajke kao početnu dubinu operacije. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Dubina operacije koja odgovara najnižoj vrijednosti u Z-osi koju operacija treba obraditi." - + Transfer the Z value of the selected feature as the Final Depth for the operation. Prenesite Z vrijednost odabrane značajke kao konačnu dubinu operacije. @@ -868,14 +868,14 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Dubina finalnog reza operacije. Može se koristiti za stvaranje čistijeg završetka obrade. - + Final Depth Konačna Dubina - + Step Down Korak Dolje @@ -915,34 +915,34 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Visina prohodnosti (izmežu alata i materijala obrade) - + + + + - - - - + The tool and its settings to be used for this operation. Alat i njegove postavke za ovu operaciju. + + + + + + + + + + - - - - - - - - - - Coolant Mode Način rada rashladnog sredstva @@ -952,28 +952,28 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Kontroler Alata - - + + Coolant Rashladno sredstvo @@ -993,8 +993,8 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Vrsta Operacije - + Step Over Percent Postotak preklapanja @@ -1044,8 +1044,8 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Profil završne obrade - + Use Outline Koristi vanjski obris @@ -1100,10 +1100,10 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Stop - + - + Direction Smjer @@ -1113,15 +1113,15 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Smjer u kojem se profil izvodi, u smjeru kazaljke na satu ili suprotno od smjera kazaljke na satu. - + CW u smjeru kazaljke sata - + CCW suprotno smjeru kazaljke sata @@ -1146,6 +1146,8 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Kosa fuga + + @@ -1155,8 +1157,6 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim - - mm mm @@ -1372,11 +1372,11 @@ Resetiranje briše sve trenutne stavke s popisa i popunjava popis svim okruglim Uzorak + + - - The tool and its settings to be used for this operation @@ -1477,9 +1477,9 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Granica prostora rada alata + - Use Start Point Koristi početnu točku @@ -1737,9 +1737,9 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Produži kraj staze - + Layer Mode Mod sloja @@ -1779,8 +1779,8 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Vrsta skeniranja - + Cut Pattern Uzorci rezanja @@ -1795,14 +1795,14 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Izbjegavajte zadnju X plohu - + Bounding Box Granični okvir - + Select the overall boundary for the operation. Odaberite cjelokupnu granicu za operaciju. @@ -1812,14 +1812,14 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Ravan: U ravnini, 3D skeniranje površine. Rotacijsko: rotacijsko skeniranje oko 4-te osi. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Dovršite operaciju u jednom prolazu na dubini ili višestrukim prolazima do krajnje dubine. - + Set the geometric clearing pattern to use for the operation. Postavite geometrijski uzorak čišćenja koji će se koristiti za operaciju. @@ -1844,14 +1844,14 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Linije spuštajućeg (drop-cutter) glodala stvaraju se paralelno s ovom osi. - + Set the Z-axis depth offset from the target surface. Postavite pomak dubine Z-osi od ciljne površine. - + Set the sampling resolution. Smaller values quickly increase processing time. Postavite rezoluciju uzorkovanja. Manje vrijednosti brzo povećavaju vrijeme obrade. @@ -1861,8 +1861,8 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Postavite na Točno, ako specificirate Početnu točku - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Omogućiti optimizaciju linearnih staza (kolinearnih točaka). Uklanja nepotrebne kolinearne točke iz izvoza G-koda. @@ -1900,14 +1900,14 @@ Ovo se može koristiti za obradu cijelog područja obrade kako bi se osigurala u Pomak dubine - + Step over Korak preko - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1916,14 +1916,14 @@ A step over of 100% results in no overlap between two different cycles. Pomak od 100% rezultira bez preklapanja između dva različita ciklusa. - + Sample interval Korak uzorka - + Optimize Linear Paths Optimiraj linearne Staze @@ -2071,8 +2071,8 @@ Zadano: "3mm" Orijentacija - + Type Tip @@ -2102,8 +2102,8 @@ Zadano: "3mm" TPI - + Operation Operacija @@ -3021,8 +3021,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap priprema - + Radius Polumjer @@ -3438,8 +3438,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Simulator putanje @@ -4333,10 +4333,9 @@ Na primjer: Ne prikazuj ovo više - + Edit - int = field(default=None) Uredi @@ -4480,8 +4479,8 @@ Na primjer: Neplanarni prilagodljivi početak također nije dostupan. - + %s is not a Base Model object of the job %s %s nije objekt osnovnog modela zadatka %s @@ -4501,8 +4500,8 @@ Na primjer: Profilirajte cijeli model, odabrana lica ili odabrane rubove - + Choose a Path Job Izaberi posao Staze @@ -4606,6 +4605,7 @@ Na primjer: List of custom property groups + int = field(default=None) Lista grupa prilagođenih svojstava @@ -4673,12 +4673,12 @@ Na primjer: + + - - The base path to modify Osnovna staza za modifikaciju @@ -4973,9 +4973,9 @@ Visina potpornih mostića. Kolekcija svih kontrolera alata za ovaj zadatak + - Operations Cycle Time Estimation Procjena vremena ciklusa @@ -5060,8 +5060,8 @@ Visina potpornih mostića. Broj pomaka pričvršćenja - + Make False, to prevent operation from generating code Postavite na netočno da spriječite operaciju kod generiranja koda. @@ -5081,8 +5081,8 @@ Visina potpornih mostića. Utječe na preciznost i učinkovitost - + Percent of cutter diameter to step over on each pass Postotak promjera glodala koji bi prelazio u svakom prolazu @@ -5260,10 +5260,10 @@ Visina potpornih mostića. Početna točka ove staze - - - + + + Make True, if specifying a Start Point Postavite na Točno, ako se specificira Početna točka @@ -5379,9 +5379,9 @@ Visina potpornih mostića. Primijenite povlačenje G99: samo povucite do Povlačne visine između rupa u ovoj operaciji - + Additional base objects to be engraved Dodatni osnovni objekti koji trebaju biti gravirani @@ -5422,9 +5422,9 @@ Visina potpornih mostića. Početni Polumjer - + Extra value to stay away from final profile- good for roughing toolpath Dodatna vrijednost za izbjegavanje krajnjeg profila - dobro za putanju alata za grubo obrađivanje @@ -5444,9 +5444,9 @@ Visina potpornih mostića. Isključite glodanje povišenih područja unutar površine. - - + + Choose how to process multiple Base Geometry features. Odaberite način obrade značajki više osnovnih geometrija. @@ -5467,8 +5467,8 @@ Visina potpornih mostića. Obradite model i materijal obrade u operaciji bez odabrane osnovne geometrije. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Smjer kojim staza obrade treba obilaziti dio (u smjeru kazaljke) CW ili (suprotno smjeru kazaljke) CCW @@ -5575,8 +5575,8 @@ Visina potpornih mostića. Postavi na istinito, ako koristite kompenzaciju polumjera glodala - + Show the temporary path construction objects when module is in DEBUG mode. Prikažite privremene objekte za izgradnju staza kada je modul u stanju DEBUG moda. @@ -5592,8 +5592,8 @@ Visina potpornih mostića. Unesite prilagođenu krajnju točku za stazu utora. - + Set the geometric clearing pattern to use for the operation. Postavite geometrijski uzorak čišćenja koji će se koristiti za operaciju. @@ -5609,8 +5609,8 @@ Visina potpornih mostića. Pozitivno produžuje završetak staze, negativno skraćuje. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Dovršite operaciju u jednom prolazu na dubini ili višestrukim prolazima do krajnje dubine. @@ -5645,8 +5645,8 @@ Visina potpornih mostića. Omogućite okretanje smjera glodanja staze utora. - + The custom start point for the path of this operation Prilagođena početna točka za stazu ove operacije @@ -6163,22 +6163,22 @@ Staza koju treba kopirati Path_Dressup - + Please select one path object Odaberite samo jedan objekt staze - + The selected object is not a path Odabrani objekt nije putanja staze - + Please select a Path object Odaberite objekt staze @@ -6335,8 +6335,8 @@ Staza koju treba kopirati Odaberi datoteku mjernih točaka - + All Files (*.*) Sve datoteke (*.*) @@ -7067,14 +7067,14 @@ Razmotrite specificiranje Materijala obrade PathProfile - + Outside Vanjsko - + Inside Unutarnje diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 51786b10ee..1e12b0d115 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -711,17 +711,17 @@ Az alaptárgy kötött dobozából származó készlet minden irányban az extra Törli az alapgeometriák listáját - + Add Hozzáad - - + + Remove Törlés @@ -776,8 +776,8 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Alaphelyzetbe állítása - + All objects will be processed using the same operation properties. Az összes tárgy feldolgozása ugyanazzal a művelettulajdonságokkal történik. @@ -822,32 +822,32 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Az összes hely feldolgozása ugyanazokkal a műveleti tulajdonságokkal történik. - + Start Depth Kezdeti mélység - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Kezdeti műveleti mélység. A művelet által feldolgozni szükséges Z-tengely legmagasabb pontja. - + Transfer the Z value of the selected feature as the Start Depth for the operation. A kiválasztott funkció Z értékének átvitele a művelet kezdő mélységeként. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. A művelet mélysége, amely megfelel a művelet által feldolgozni szükséges legalacsonyabb Z-tengely értéknek. - + Transfer the Z value of the selected feature as the Final Depth for the operation. A kiválasztott funkció Z értékének átvitele a művelet végső mélységeként. @@ -862,14 +862,14 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti A művelet végső vágásának mélysége. Használható tisztább felület előállítására. - + Final Depth Végső mélység - + Step Down Visszaléptetés @@ -909,34 +909,34 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Hézagmagasság - + + + + - - - - + The tool and its settings to be used for this operation. A művelethez használandó szerszám és beállításai. + + + + + + + + + + - - - - - - - - - - Coolant Mode Hűtőközeg mód @@ -946,28 +946,28 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti G Kód - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Eszköz vezérlő - - + + Coolant Hűtőfolyadék @@ -987,8 +987,8 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Művelettípus - + Step Over Percent Egy lépéssel tovább százalékban @@ -1038,8 +1038,8 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Profil befejezése - + Use Outline Kontúr használata @@ -1094,10 +1094,10 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Megállít - + - + Direction Irány @@ -1107,15 +1107,15 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti A profil végrehajtásának iránya az óramutató járásával megegyező vagy az óramutató járásával ellentétes irányban. - + CW Órajárás iránya - + CCW Órajárással ellentétes irány @@ -1140,6 +1140,8 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Gérvágás + + @@ -1149,8 +1151,6 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti - - mm mm @@ -1366,11 +1366,11 @@ A Visszaállítás törli az összes aktuális elemet a listából, és kitölti Minta + + - - The tool and its settings to be used for this operation @@ -1469,9 +1469,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Anyag hozzáadása + - Use Start Point Kezdőpont használata @@ -1727,9 +1727,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Útvonal kiterjesztés vége - + Layer Mode Réteg mód @@ -1769,8 +1769,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Szkennelési módszer - + Cut Pattern Vágott minta @@ -1785,14 +1785,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Kerülje az utolsó X felületet - + Bounding Box Határolókeret - + Select the overall boundary for the operation. Jelölje ki a művelet teljes határvonalát. @@ -1802,14 +1802,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Síkbeli: Lapos, 3D felület letapogatás. Forgatás: 4-tengelyes forgató letapogatás. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Fejezze be a műveletet egyetlen lépésben a mélységig, vagy több lépésben a végső mélységig. - + Set the geometric clearing pattern to use for the operation. Állítsa be a művelet geometriai forgácsoló élmintázatát. @@ -1834,14 +1834,14 @@ The latter can be used to face of the entire stock area to ensure uniform height A legördülő vonalak ezzel a tengelyekkel párhuzamosan jönnek létre. - + Set the Z-axis depth offset from the target surface. Állítsa be a Z tengely mély eltolását a célfelületről. - + Set the sampling resolution. Smaller values quickly increase processing time. Állítsa be a mintavételi sebesség felbontását. A kisebb értékek felgyorsítják a feldolgozási időt. @@ -1851,8 +1851,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Állítsa igazra, ha egy kiinduló pontot ad meg - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Megvalósítja az egyenes vonalú pályák (egy vonalba eső pontok) optimalizálását. Eltávolítja a felesleges egy vonalba eső pontokat a generált G-kódból. @@ -1887,14 +1887,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Mélységi eltolás - + Step over Átlép - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1903,14 +1903,14 @@ A step over of 100% results in no overlap between two different cycles. A 100%-os eltolás megakadályozza, hogy két különböző ciklus átfedje egymást. - + Sample interval Mintavételezés - + Optimize Linear Paths Egyenes útvonalak optimalizálása @@ -2056,8 +2056,8 @@ Default: 3 mm Tájolás - + Type Típus @@ -2087,8 +2087,8 @@ Default: 3 mm Menet per coll (inch) - + Operation Művelet @@ -3009,8 +3009,8 @@ Ha több azonos nevű eszköz vagy szerszámforma létezik különböző könyvt AxisMap kivitelezés - + Radius Sugár @@ -3425,8 +3425,8 @@ Ha több azonos nevű eszköz vagy szerszámforma létezik különböző könyvt TaskPathSimulator - + Path Simulator Folyamatszimulátor @@ -4316,10 +4316,9 @@ Például: Ne mutasd többet - + Edit - int = field(default=None) Szerkesztés @@ -4461,8 +4460,8 @@ Például: A nem síkbeli adaptív rendszerindítás szintén nem érhető el. - + %s is not a Base Model object of the job %s %s nem egy alap modell objektuma ennek a feladatnak: %s @@ -4482,8 +4481,8 @@ Például: Használja ki a teljes modellt, jelölje ki a felülete(ke)t vagy a kijelölt él(ek)et - + Choose a Path Job Tevékenység elérési útjának kijelölése @@ -4587,6 +4586,7 @@ Például: List of custom property groups + int = field(default=None) A felhasználó által definiált tárgycsoportok listája @@ -4649,12 +4649,12 @@ Például: + + - - The base path to modify A megváltoztatni kívánt alap pálya útvonal @@ -4948,9 +4948,9 @@ Például: A feladathoz szükséges összes vezérlőeszköz gyűjteménye + - Operations Cycle Time Estimation Műveleti ciklus időbecslése @@ -5035,8 +5035,8 @@ Például: Koordináta rendszer kiválasztása - + Make False, to prevent operation from generating code Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson @@ -5056,8 +5056,8 @@ Például: Befolyásolja a pontosságot és a teljesítményt - + Percent of cutter diameter to step over on each pass Maró átmérő százaléka mellyel átlép minden elhaladáskor @@ -5233,10 +5233,10 @@ Például: Ennek a szerszámpályának az induló pontja - - - + + + Make True, if specifying a Start Point Állítsa igazra, ha egy kiinduló pontot ad meg @@ -5350,9 +5350,9 @@ Például: G99 visszahúzás alkalmazása: csak a művelet furatai között húzza vissza a visszahúzási magasság értéket - + Additional base objects to be engraved Kiegészítő alap tárgyakat kell bevésni @@ -5393,9 +5393,9 @@ Például: Kezdő sugár - + Extra value to stay away from final profile- good for roughing toolpath Extra érték ami távol tart a záró profiltól- jó a nagyoló szerszámmozgáshoz @@ -5415,9 +5415,9 @@ Például: Zárja ki a felemelt területek marását a felületen belül. - - + + Choose how to process multiple Base Geometry features. Válassza ki, hogyan kezeljen több alapgeometriai függvényt. @@ -5438,8 +5438,8 @@ Például: A modell és a primitív folyamat olyan műveletben, amely nem választja ki az alapgeometria beállítását. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) A szerszámmozgás az alkatrész körül leírt iránya az óramutató járásával megegyező (CW) vagy az óramutató járásával ellentétes irányú (CCW) @@ -5546,8 +5546,8 @@ Például: Állítsa igazra, ha sugár vágó kompenzációt alkalmaz - + Show the temporary path construction objects when module is in DEBUG mode. Az ideiglenes építőtárgyak megjelenítésének útvonala, ha a modul DEBUG módban van. @@ -5563,8 +5563,8 @@ Például: Adja meg a horony egyéni végpontját. - + Set the geometric clearing pattern to use for the operation. Állítsa be a művelet geometriai forgácsoló élmintázatát. @@ -5580,8 +5580,8 @@ Például: A pozitív kiterjeszti az elérési út végét, a negatív megrövidíti. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Fejezze be a műveletet egyetlen lépésben a mélységig, vagy több lépésben a végső mélységig. @@ -5612,8 +5612,8 @@ Például: Aktiválás a horony vágási irányának megfordításához. - + The custom start point for the path of this operation A művelet röppályájának egyéni kezdőpontja @@ -6128,24 +6128,24 @@ Például: Path_Dressup - + Please select one path object Jelöljön ki egy pálya tárgyat - + The selected object is not a path A kijelölt tárgy nem pálya útvonal - + Please select a Path object Kérem válasszon egy pályaútvonal tárgyat @@ -6302,8 +6302,8 @@ Például: Mérési pontfájl kiválasztása - + All Files (*.*) Összes fájl (*.*) @@ -7034,14 +7034,14 @@ Például: PathProfile - + Outside Külső - + Inside Belső diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 71c700cf71..9326da88a9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Menambahkan - - + + Remove Menghapus @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Setel ulang - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Berhenti - + - + Direction Arah @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Langkah selesai - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientasi - + Type Jenis @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Jari-jari @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Edit @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) All Files (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index c37cf795e2..10dfb1a470 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Cancella l'elenco delle geometrie di base - + Add Aggiungi - - + + Remove Rimuovi @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Ripristina - + All objects will be processed using the same operation properties. Tutti gli oggetti saranno elaborati utilizzando le stesse proprietà operative. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul Tutte le posizioni saranno elaborate utilizzando le stesse proprietà operative. - + Start Depth Profondità Iniziale - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Profondità del taglio finale dell'operazione. Può essere utilizzato per ottenere una finitura più pulita. - + Final Depth Profondità Finale - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Altezza libera - + + + + - - - - + The tool and its settings to be used for this operation. Lo strumento e le sue impostazioni da utilizzare per questa operazione. + + + + + + + + + + - - - - - - - - - - Coolant Mode Modalità refrigerante @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controllore Strumento - - + + Coolant Refrigerante @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Tipo Operazione - + Step Over Percent Percentuale di sovrapposizione @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Profilo di finitura - + Use Outline Usa contorno @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Ferma - + - + Direction Direzione @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul La direzione in cui il profilo viene eseguita, in senso orario o antiorario. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Usa Punto Iniziale @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Passo successivo - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientamento - + Type Tipo @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operazione @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Raggio @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Simulatore di Percorso @@ -4324,10 +4324,9 @@ Per esempio: Non Mostrare Più - + Edit - int = field(default=None) Modifica @@ -4469,8 +4468,8 @@ Per esempio: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ Per esempio: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Scegli un Percorso di Lavorazione @@ -4595,6 +4594,7 @@ Per esempio: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ Per esempio: + + - - The base path to modify Il percorso di base da modificare @@ -4956,9 +4956,9 @@ Per esempio: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ Per esempio: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ Per esempio: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ Per esempio: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ Per esempio: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ Per esempio: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ Per esempio: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ Per esempio: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ Per esempio: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ Per esempio: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ Per esempio: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ Per esempio: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ Per esempio: Path_Dressup - + Please select one path object Selezionare un percorso oggetto - + The selected object is not a path L'oggetto selezionato non è un percorso - + Please select a Path object Seleziona un oggetto Percorso @@ -6310,8 +6310,8 @@ Per esempio: Select Probe Point File - + All Files (*.*) Tutti i File (*.*) @@ -7042,14 +7042,14 @@ Per esempio: PathProfile - + Outside Esterno - + Inside Interno diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 0d160d8895..17efe5859a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add 追加 - - + + Remove 削除 @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul リセット - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant 冷却剤 @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul 停止 - + - + Direction 方向 @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over ステップ オーバー - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm 向き - + Type タイプ @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation オペレーション @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius 半径 @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) 編集 @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) すべてのファイル (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts index 9ecc75cfdf..4a67814328 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all ასუფთავებს საბაზისო გეომეტრიების სიას - + Add დამატება - - + + Remove წაშლა @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul განულება - + All objects will be processed using the same operation properties. ყველა ობიექტი ოპერაციის იგივე თვისებების გამოყენებით დამუშავდება. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul ყველა მდებარეობა ოპერაციის იგივე თვისებების გამოყენებით დამუშავდება. - + Start Depth საწყისი სიღრმე - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. ოპერაციის საწყისი სიღრმე. Z-ღერძის უმაღლესი წერტილი, რომელიც ამ ოპერაციამ უნდა დაამუშაოს. - + Transfer the Z value of the selected feature as the Start Depth for the operation. მონიშნული თვისების Z მნიშვნელობის ოპერაციის StartDepth-ად გამოყენება. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. მონიშნული თვისების Z მნიშვნელობის ოპერაციის საბოლოო სიღრმედ გამოყენება. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth საბოლოო სიღრმე - + Step Down ბიჯი ქვემოთ @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul გაბარიტული სიმაღლე - + + + + - - - - + The tool and its settings to be used for this operation. ხელსაწყო და ამ ოპერაციაში გამოყენებული მისი პარამეტრები. + + + + + + + + + + - - - - - - - - - - Coolant Mode გამაგრილებლის რეჟიმი @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller ხელსაწყოს კონტროლერი - - + + Coolant გამაგრილებელი @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul ოპერაციის ტიპი - + Step Over Percent მიწოდების ბიჯის პროცენტულობა @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul დამასრულებელი პროფილი - + Use Outline კიდის გამოყენება @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul შეჩერება - + - + Direction მიმართულება @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul მიმართულება, რომლითაც პროფილი შესრულდება. საათის, თუ საათის საწინააღმდეგო მიმართულებით. - + CW სმ - + CCW სსს @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul ირიბპირა შეერთება + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm მმ @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul შაბლონი + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height მასალის დასაშვებობა + - Use Start Point სასტარტო წერტილის გამოყენება @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height ტრაექტორიის ბოლოს დაგრძელება - + Layer Mode ფენის რეჟიმი @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height სკანირების ტიპი - + Cut Pattern ნიმუშის ამოჭრა @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height ბოლო X ზედაპირების თავიდან აცილება - + Bounding Box შემზღუდავი ოთხკუთხედი - + Select the overall boundary for the operation. აირჩიეთ ოპერაციის საერთო საზღვარი. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. ოპერაციის სიღრმეზე ერთი გავლის დასრულება. ან აირჩიეთ მრავალი გავლა, სრული სიღრმის მისაღწევად. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height ფრეზირების ხაზები ამ ღერძის პარალელურად შეიქმნება. - + Set the Z-axis depth offset from the target surface. სამიზნე ზედაპირიდან Z-ღერძის სიღრმის წანაცვლების დაყენება. - + Set the sampling resolution. Smaller values quickly increase processing time. დააყენეთ სამპლინგის გაფართოება. მცირე მნიშვნელობები სწრაფად ზრდიან დამუშავების დროს. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height ჩართვა, თუ საწყისი წერტილი მითითებულია - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height სიღრმის წანაცვლება - + Step over გადაბიჯება - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval სინჯის ინტერვალი - + Optimize Linear Paths ხაზოვანი ტრაექტორიების ოპტიმიზაცია @@ -2062,8 +2062,8 @@ Default: 3 mm ორიენტაცია - + Type ტიპი @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation ოპერაცია @@ -3014,8 +3014,8 @@ Should multiple tools or tool shapes with the same name exist in different direc ღერძების რუკის ზღუდარი - + Radius რადიუსი @@ -3430,8 +3430,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator ტრაექტორიის სიმულატორი @@ -4322,10 +4322,9 @@ CNC ჩარხებს მიწოდების სიჩქარის აღარ მაჩვენო - + Edit - int = field(default=None) ჩასწორება @@ -4467,8 +4466,8 @@ CNC ჩარხებს მიწოდების სიჩქარის არაბრტყელი ადაპტიური სტარტიც ხელმიუწვდომელია. - + %s is not a Base Model object of the job %s %s დავალებისთვის %s ძირითადი მოდელის ობექტს არ წარმოადგენს @@ -4488,8 +4487,8 @@ CNC ჩარხებს მიწოდების სიჩქარის Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job აირჩიეთ ტრაექტორიის დავალება @@ -4593,6 +4592,7 @@ CNC ჩარხებს მიწოდების სიჩქარის List of custom property groups + int = field(default=None) ხელით მითითებული თვისების ჯგუფების სია @@ -4655,12 +4655,12 @@ CNC ჩარხებს მიწოდების სიჩქარის + + - - The base path to modify ჩასასწორებელი საბაზისო ტრაექტორია @@ -4954,9 +4954,9 @@ CNC ჩარხებს მიწოდების სიჩქარის დავალების ყველა ხელსაწყოს კონტროლერის კოლექცია + - Operations Cycle Time Estimation ოპერაციის ციკლის დროს შეფასება @@ -5041,8 +5041,8 @@ CNC ჩარხებს მიწოდების სიჩქარის სამაგრის წანაცვლების ნომერი - + Make False, to prevent operation from generating code გამორთეთ ოპერაციისთვის კოდის გენერაციის ხელის შესაშლელად @@ -5062,8 +5062,8 @@ CNC ჩარხებს მიწოდების სიჩქარის გავლენა აქვს სიზუსტეზე და წარმადობაზე - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5239,10 +5239,10 @@ CNC ჩარხებს მიწოდების სიჩქარის ამ ტრაექტორიის საწყისი წერტილი - - - + + + Make True, if specifying a Start Point ჩართვა, თუ საწყისი წერტილი მითითებულია @@ -5356,9 +5356,9 @@ CNC ჩარხებს მიწოდების სიჩქარის Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved დამატებით ამოსატვიფრი ძირითადი ობიექტები @@ -5399,9 +5399,9 @@ CNC ჩარხებს მიწოდების სიჩქარის საწყისი რადიუსი - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5421,9 +5421,9 @@ CNC ჩარხებს მიწოდების სიჩქარის მითითებულ ზედაპირთან შედარებით აწეული ადგილების ღარვის გამორიცხვა. - - + + Choose how to process multiple Base Geometry features. აირჩიეთ, როგორ დამუშავდება მრავალი ძირითადი გეომეტრიის მქონე თვისებები. @@ -5444,8 +5444,8 @@ CNC ჩარხებს მიწოდების სიჩქარის Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) ხელსაწყოს მჭრელი იარაღის მიმართულება საათის(ს. მ.) ან საათის საწინააღმდეგო (ს. ს. მ.) მიმართულებით მოძრაობა @@ -5552,8 +5552,8 @@ CNC ჩარხებს მიწოდების სიჩქარის ჩართეთ, თუ იყენებთ ხელსაწყოს რადიუსის კომპენსაციას - + Show the temporary path construction objects when module is in DEBUG mode. მოდულის გამართვის რეჟიმში ყოფნის დროს დროებითი ტრაექტორიის კონსტრუქციული ობიექტების ჩვენება. @@ -5569,8 +5569,8 @@ CNC ჩარხებს მიწოდების სიჩქარის შეიყვანეთ სლოტის ტრაექტორიის სასურველი ბოლო წერტილი. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5586,8 +5586,8 @@ CNC ჩარხებს მიწოდების სიჩქარის დადებითი მნიშვნელობა დააგრძელებს ტრაექტორიის ბოლოს, უარყოფითი კი დაამოკლებს. - + Complete the operation in a single pass at depth, or multiple passes to final depth. ოპერაციის სიღრმეზე ერთი გავლის დასრულება. ან აირჩიეთ მრავალი გავლა, სრული სიღრმის მისაღწევად. @@ -5618,8 +5618,8 @@ CNC ჩარხებს მიწოდების სიჩქარის Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation ამ ოპერაციის ტრაექტორიის საწყისი ხელით მითითებული წერტილი @@ -6134,24 +6134,24 @@ CNC ჩარხებს მიწოდების სიჩქარის Path_Dressup - + Please select one path object გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი - + The selected object is not a path მონიშნული ობიექტი ტრაექტორია არაა - + Please select a Path object აირჩიეთ ტრაექტორიის ობიექტი @@ -6308,8 +6308,8 @@ CNC ჩარხებს მიწოდების სიჩქარის არჩიეთ ზონდის წერტილის ფაილი - + All Files (*.*) ყველა ფაილი (*.*) @@ -7040,14 +7040,14 @@ CNC ჩარხებს მიწოდების სიჩქარის PathProfile - + Outside გარედან - + Inside შიგნიდან diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index 1af33d0f3c..785c82eb7d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -705,17 +705,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add 추가하기 - - + + Remove 제거 @@ -770,8 +770,8 @@ Reset deletes all current items from the list and fills the list with all circul 재설정 - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -816,32 +816,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -856,14 +856,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -903,34 +903,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -940,28 +940,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Coolant @@ -981,8 +981,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1032,8 +1032,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1088,10 +1088,10 @@ Reset deletes all current items from the list and fills the list with all circul 중지 - + - + Direction 방향 @@ -1101,15 +1101,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW 시계방향 - + CCW CCW @@ -1134,6 +1134,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1143,8 +1145,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1360,11 +1360,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1465,9 +1465,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1723,9 +1723,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1765,8 +1765,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1781,14 +1781,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1798,14 +1798,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1830,14 +1830,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1847,8 +1847,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1883,14 +1883,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over 한 단계 진행 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1899,14 +1899,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2054,8 +2054,8 @@ Default: 3 mm Orientation - + Type 유형 @@ -2085,8 +2085,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3007,8 +3007,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radius @@ -3423,8 +3423,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4316,10 +4316,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) 편집 @@ -4461,8 +4460,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4482,8 +4481,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4587,6 +4586,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4649,12 +4649,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4948,9 +4948,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5035,8 +5035,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5056,8 +5056,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5233,10 +5233,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5350,9 +5350,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5393,9 +5393,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5415,9 +5415,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5438,8 +5438,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5546,8 +5546,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5563,8 +5563,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5580,8 +5580,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5612,8 +5612,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6128,24 +6128,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6302,8 +6302,8 @@ For example: Select Probe Point File - + All Files (*.*) All Files (*.*) @@ -7034,14 +7034,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index e767333de6..dd24d123c2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Toevoegen - - + + Remove Verwijderen @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Herstel - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Gereedschapsregelaar - - + + Coolant Koelvloeistof @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Profiel voltooien - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Stop - + - + Direction Richting @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW Rechtsom - + CCW Linksom @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Patroon + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Gebruik startpunt @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scantype - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Stap over - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Oriëntatie - + Type Type @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Bewerking @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radius @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Laat dit niet meer zien - + Edit - int = field(default=None) Bewerken @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: Het beginpunt van dit pad - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Startstraal - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Alle bestanden (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Buiten - + Inside Binnen diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index f4d369738d..a9775a8877 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -717,17 +717,17 @@ Dla półfabrykatu materiału podstawowego z ramki otaczającej oznacza to pół Czyści listę geometrii bazowych - + Add Dodaj - - + + Remove Usuń @@ -782,8 +782,8 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Resetuj - + All objects will be processed using the same operation properties. Wszystkie obiekty będą przetwarzane przy użyciu tych samych właściwości operacji. @@ -828,32 +828,32 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Wszystkie miejsca będą przetwarzane przy użyciu tych samych właściwości operacji. - + Start Depth Głębokość początkowa - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Zacznij operację od Głębokości. Najwyższy punkt w osi Z, który ma zostać przetworzony. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Przenieś wartość Z wybranej cechy jako początkową głębokość dla tej operacji - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Głębokość operacji, która odpowiada najniższej wartości w osi Z, którą operacja musi przetwarzać. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Przenieś wartość Z wybranej cechy jako końcową głębokość operacji @@ -868,14 +868,14 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Głębokość operacji zakończenia obróbki. Może być użyta do uzyskania czystszego wykończenia. - + Final Depth Głębokość końcowa - + Step Down Krok w dół @@ -915,34 +915,34 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Odstęp bezpieczeństwa - + + + + - - - - + The tool and its settings to be used for this operation. Narzędzie i jego ustawienia, które będą używane do tej operacji. + + + + + + + + + + - - - - - - - - - - Coolant Mode Tryb chłodzenia @@ -952,28 +952,28 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Kontroler narzędzi - - + + Coolant Chłodziwo @@ -993,8 +993,8 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Typ operacji - + Step Over Percent Procent szerokości skrawania @@ -1044,8 +1044,8 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Wykończ profil - + Use Outline Użyj konturu @@ -1100,10 +1100,10 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Zatrzymaj - + - + Direction Kierunek @@ -1113,15 +1113,15 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Kierunek, w którym wykonywany jest profil, zgodnie z ruchem wskazówek zegara lub w kierunku przeciwnym do ruchu wskazówek zegara. - + CW Zgodnie ze wskazówkami zegara - + CCW Przeciwnie do ruchu wskazówek zegara @@ -1146,6 +1146,8 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Połączenie ukośne + + @@ -1155,8 +1157,6 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr - - mm mm @@ -1372,11 +1372,11 @@ Zresetuje wszystkie bieżące elementy z listy i wypełnia listę wszystkimi okr Wzór + + - - The tool and its settings to be used for this operation @@ -1477,9 +1477,9 @@ Ta druga opcja może być użyta do planowania całego obszaru półfabrykatu, a Dodatek materiału + - Use Start Point Użyj punktu początkowego @@ -1735,9 +1735,9 @@ Ta druga opcja może być użyta do planowania całego obszaru półfabrykatu, a Końcowy zakres ścieżki - + Layer Mode Tryb warstw @@ -1777,8 +1777,8 @@ Ta druga opcja może być użyta do planowania całego obszaru półfabrykatu, a Metoda skanowania - + Cut Pattern Wzór obróbki @@ -1793,14 +1793,14 @@ Ta druga opcja może być użyta do planowania całego obszaru półfabrykatu, a Unikaj ostatnich X ścian - + Bounding Box Ramka otaczająca - + Select the overall boundary for the operation. Wybierz ogólną granicę dla operacji. @@ -1811,14 +1811,14 @@ Ta druga opcja może być użyta do planowania całego obszaru półfabrykatu, a Obrotowy: Skanowanie obrotowe w 4 osiach. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Wykonaj operację w jednym przejściu na określoną głębokość lub w kilku przejściach do głębokości końcowej. - + Set the geometric clearing pattern to use for the operation. Ustaw geometryczny wzorzec oczyszczenia, który ma być używany podczas operacji. @@ -1843,14 +1843,14 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Linie frezowania wgłębnego tworzone są równoległe do tej osi. - + Set the Z-axis depth offset from the target surface. Ustaw przesunięcie głębokości osi Z od powierzchni docelowej. - + Set the sampling resolution. Smaller values quickly increase processing time. Ustaw rozdzielczość próbkowania. Im mniejsza wartość, tym dłuższy czas przetwarzania. @@ -1860,8 +1860,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Ustaw "Prawda", jeśli określono punkt początkowy - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Włącz optymalizację ścieżek liniowych (punktów współliniowych). Usuwa niepotrzebne punkty współliniowe z wygenerowanego G-Code. @@ -1896,14 +1896,14 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Głębokość przesunięcia - + Step over Szerokość skrawania - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1912,14 +1912,14 @@ A step over of 100% results in no overlap between two different cycles. Szerokość skrawania 100% powoduje, że dwa różne cykle nie nakładają się na siebie. - + Sample interval Odstęp między próbkami - + Optimize Linear Paths Optymalizuj ścieżki liniowe @@ -2067,8 +2067,8 @@ Domyślnie: 3 mm Orientacja - + Type Typ @@ -2098,8 +2098,8 @@ Domyślnie: 3 mm TPI - + Operation Operacja @@ -3023,8 +3023,8 @@ Should multiple tools or tool shapes with the same name exist in different direc Wykończenie odwzorowania osi - + Radius Promień @@ -3439,8 +3439,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Symulator obróbki @@ -4325,10 +4325,9 @@ Na przykład: Nie wyświetlaj tego więcej - + Edit - int = field(default=None) Edytuj @@ -4470,8 +4469,8 @@ Na przykład: Nie jest również dostępny nieplanarny start adaptacyjny. - + %s is not a Base Model object of the job %s %s nie jest obiektem modelu podstawowego zadania %s @@ -4491,8 +4490,8 @@ Na przykład: Profiluj cały model, wybrane ściany lub wybrane krawędzie - + Choose a Path Job Wybierz ścieżkę zadania @@ -4596,6 +4595,7 @@ Na przykład: List of custom property groups + int = field(default=None) Lista grup właściwości niestandardowych @@ -4658,12 +4658,12 @@ Na przykład: + + - - The base path to modify Ścieżka bazowa do modyfikacji @@ -4957,9 +4957,9 @@ Na przykład: Zbiór wszystkich kontrolerów narzędzi do pracy + - Operations Cycle Time Estimation Szacunkowy czas trwania cyklu operacji @@ -5044,8 +5044,8 @@ Na przykład: Numer przesunięcia urządzenia - + Make False, to prevent operation from generating code Zaznacz "Fałsz”, jeśli chcesz uniemożliwić operacji generowanie jakiegokolwiek kodu @@ -5065,8 +5065,8 @@ Na przykład: Wpływa na dokładność i wydajność - + Percent of cutter diameter to step over on each pass Procent średnicy freza do szerokości skrawania przy każdym przejściu @@ -5242,10 +5242,10 @@ Na przykład: Punkt początkowy tej ścieżki - - - + + + Make True, if specifying a Start Point Upewnij się, że określasz punkt początkowy @@ -5359,9 +5359,9 @@ Na przykład: Zastosuj wycofanie G99: w tej operacji wycofuj tylko do wysokości "WysokośćWycofania" pomiędzy otworami - + Additional base objects to be engraved Dodatkowe obiekty podstawowe do grawerowania @@ -5402,9 +5402,9 @@ Na przykład: Promień początkowy - + Extra value to stay away from final profile- good for roughing toolpath Dodatkową wartość odległości od profilu końcowego odpowiednia do obróbki zgrubnej @@ -5424,9 +5424,9 @@ Na przykład: Wyklucz frezowanie podwyższonych obszarów wewnątrz powierzchni czołowej. - - + + Choose how to process multiple Base Geometry features. Wybierz sposób przetwarzania wielu elementów geometrii podstawowej. @@ -5447,8 +5447,8 @@ Na przykład: Przetwarzaj model i półfabrykat w elemencie bez wybranej geometrii bazowej. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Kierunek, w którym narzędzie porusza się po ścieżce wokół części, zgodnie (CW) lub przeciwnie (CCW) do ruchu wskazówek zegara @@ -5555,8 +5555,8 @@ Na przykład: Ustaw wartość Prawda, jeśli używasz kompensacji promienia frezu - + Show the temporary path construction objects when module is in DEBUG mode. Pokaż tymczasowe obiekty konstrukcyjne ścieżki, gdy moduł jest w trybie DEBUGOWANIA. @@ -5572,8 +5572,8 @@ Na przykład: Wprowadź przykładowy punkt końcowy dla ścieżki rowka. - + Set the geometric clearing pattern to use for the operation. Ustaw geometryczny wzorzec oczyszczenia, który ma być używany podczas operacji. @@ -5589,8 +5589,8 @@ Na przykład: Wartość dodatnia przedłuża koniec ścieżki, wartość ujemna skraca go. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Wykonaj operację w jednym przejściu na głębokość lub w kilku przejściach do głębokości końcowej. @@ -5621,8 +5621,8 @@ Na przykład: Włącz, aby odwrócić kierunek skrawania ścieżki rowka. - + The custom start point for the path of this operation Niestandardowy punkt początkowy dla ścieżki tej operacji @@ -6140,24 +6140,24 @@ OL Dropcutter* lub Eksperymentalny (nieoparty na OCL). Path_Dressup - + Please select one path object Proszę wybrać jeden obiekt ścieżki - + The selected object is not a path Wybrany obiekt nie jest ścieżką - + Please select a Path object Proszę wybrać obiekt ścieżki @@ -6314,8 +6314,8 @@ OL Dropcutter* lub Eksperymentalny (nieoparty na OCL). Wybierz plik punktów pomiarowych - + All Files (*.*) Wszystkie pliki (*.*) @@ -7046,14 +7046,14 @@ Starsze narzędzia nie są obsługiwane przez funkcję Bezpieczeństwo CAM PathProfile - + Outside Na zewnątrz - + Inside Wewnątrz diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index 2cde3af3d5..2c83a4b3ed 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Adicionar - - + + Remove Remover @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Restaurar - + All objects will be processed using the same operation properties. Todos os objetos serão processados usando as mesmas propriedades da operação. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul Todas as localizações serão processadas usando as mesmas propriedades de operação. - + Start Depth Profundidade inicial - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Profundidade final - + Step Down Passo Abaixo @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Altura livre - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Modo de resfriamento @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Code - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controlador de ferramenta - - + + Coolant Líquido de refrigeração @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Tipo de operação - + Step Over Percent Porcentagem de sobreposição @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Perfil de acabamento - + Use Outline Usar contorno @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Parar - + - + Direction Direção @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW Sentido Horário - + CCW Sentido Anti-horário @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Padrão + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Usar ponto inicial @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Modo de Camadas @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Tipo de escaneamento - + Cut Pattern Padrão de Corte @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Evitar Últimas X Faces - + Bounding Box Caixa delimitadora - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Deslocamento da profundidade - + Step over Avançar - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Intervalo de amostragem - + Optimize Linear Paths Otimizar caminhos lineares @@ -2062,8 +2062,8 @@ Default: 3 mm Orientação - + Type Tipo @@ -2093,8 +2093,8 @@ Default: 3 mm TPP - + Operation Operação @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Raio @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Editar @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Escolha uma tarefa de trajetória @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Mostra os objetos temporários de construção de trajetória quando o módulo está no modo DEBUG. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Todos os arquivos (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Lado de Fora - + Inside Lado de Dentro diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index 6e6a2bf707..3601bee94f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Adicionar - - + + Remove Remover @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Reiniciar - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controlador de Ferramenta - - + + Coolant Refrigerante @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Parar - + - + Direction Direção @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Ignorar - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Padrão: 3 mm Orientação - + Type Tipo @@ -2093,8 +2093,8 @@ Padrão: 3 mm TPI - + Operation Operação @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Raio @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Editar @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Todos os Ficheiros (*. *) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index ce3aa00221..5d6653f4fa 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -716,17 +716,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Adaugă - - + + Remove Elimină @@ -781,8 +781,8 @@ Reset deletes all current items from the list and fills the list with all circul Reinițializare - + All objects will be processed using the same operation properties. Toate obiectele vor fi procesate folosind aceleași proprietăți. @@ -827,32 +827,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -867,14 +867,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -914,34 +914,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Mod Coolant @@ -951,28 +951,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Controler sculă - - + + Coolant Coolant @@ -992,8 +992,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1043,8 +1043,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1099,10 +1099,10 @@ Reset deletes all current items from the list and fills the list with all circul Stop - + - + Direction Direcţia @@ -1112,15 +1112,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1145,6 +1145,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1154,8 +1156,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1371,11 +1371,11 @@ Reset deletes all current items from the list and fills the list with all circul Model + + - - The tool and its settings to be used for this operation @@ -1476,9 +1476,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Permis material + - Use Start Point Folosește punctul de pornire @@ -1734,9 +1734,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1776,8 +1776,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1792,14 +1792,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Casetă de încadrare - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1809,14 +1809,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1841,14 +1841,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1858,8 +1858,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Activează optimizarea căilor liniare (puncte co-liniare). Elimină puncte co-liniare inutile de la ieșirea prin codul G. @@ -1894,14 +1894,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Deplasare adâncime - + Step over A ieși din - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1910,14 +1910,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Intervalul de eșantionare - + Optimize Linear Paths Optimizare căi liniare @@ -2065,8 +2065,8 @@ Default: 3 mm Orientarea - + Type Tip @@ -2096,8 +2096,8 @@ Default: 3 mm TPI - + Operation Operațiune @@ -3018,8 +3018,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Raza @@ -3434,8 +3434,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4327,10 +4327,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Editare @@ -4472,8 +4471,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4493,8 +4492,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Alege o lucrare de traiectorie @@ -4598,6 +4597,7 @@ For example: List of custom property groups + int = field(default=None) Lista grupurilor de proprietăți personalizate @@ -4660,12 +4660,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4959,9 +4959,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5046,8 +5046,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5067,8 +5067,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5244,10 +5244,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5361,9 +5361,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5404,9 +5404,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5426,9 +5426,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5449,8 +5449,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5557,8 +5557,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5574,8 +5574,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5591,8 +5591,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5623,8 +5623,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6139,24 +6139,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6313,8 +6313,8 @@ For example: Select Probe Point File - + All Files (*.*) Toate fișierele (*.*) @@ -7045,14 +7045,14 @@ For example: PathProfile - + Outside În afara - + Inside În interior diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index d2e573a64f..b46bc4fb46 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Очищает список базовых геометрий - + Add Добавить - - + + Remove Убрать @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Сбросить - + All objects will be processed using the same operation properties. Все объекты будут обработаны с использованием одинаковых свойств операции. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul Все места будут обработаны с использованием одинаковых операционных свойств. - + Start Depth Начальная глубина - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Начальная глубина операции. Самая высокая точка по оси Z, которую необходимо обработать. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Передайте значение Z выбранного объекта в качестве начальной глубины операции. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Глубина операции, которая соответствует наименьшему значению по оси Z, которое необходимо обработать операции. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Передайте значение Z выбранного объекта в качестве конечной глубины операции. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Глубина окончательного разреза операции. Может использоваться для получения более чистой отделки. - + Final Depth Конечная глубина - + Step Down Шаг вниз @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Высота зазора - + + + + - - - - + The tool and its settings to be used for this operation. Инструмент и его настройки, которые будут использоваться для этой операции. + + + + + + + + + + - - - - - - - - - - Coolant Mode Режим охлаждения @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Code - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Контроллер инструмента - - + + Coolant Охлаждающая жидкость @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Тип операции - + Step Over Percent Процент шага(подачи) @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Отделочное (чистовое) профилирование - + Use Outline Использовать контур @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Остановить - + - + Direction Направление @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul Направление, в котором выполняется профиль, по часовой или против часовой стрелки. - + CW По часовой - + CCW Против часовой стрелки @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Угловое соединение + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm мм @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Шаблон + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Допуск материала + - Use Start Point Использовать начальную точку @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Завершение траектории - + Layer Mode Режим слоя @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Тип сканирования - + Cut Pattern Вырезать шаблон @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Избегать последних X фасок - + Bounding Box Габариты - + Select the overall boundary for the operation. Выберите общую границу операции. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Планарное: плоское, трехмерной сканирование поверхности. Вращательное: 4-осное вращательное сканирование. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Завершите операцию за один проход на глубину или за несколько проходов до конечной глубины. - + Set the geometric clearing pattern to use for the operation. Установить шаблон геометрической очистки (чистовой обработки) для использования в операции. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Линии отреза создаются параллельно этой оси. - + Set the Z-axis depth offset from the target surface. Установите смещение глубины по оси Z от целевой поверхности. - + Set the sampling resolution. Smaller values quickly increase processing time. Установите разрешение выборки. Меньшие значения быстро увеличивают время обработки. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Установить в Истину если указывается начальная точка - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Включить оптимизацию линейных путей (коллинеарных точек). Удаляет ненужные коллинеарные точки из вывода G-кода. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Смещение Глубины - + Step over Шаг с обходом - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. Шаг свыше 100% приводит к отсутствию перекрытия между двумя разными циклами. - + Sample interval Пример интервала - + Optimize Linear Paths Оптимизация Линейных путей @@ -2058,8 +2058,8 @@ Default: 3 mm Ориентация - + Type Тип @@ -2089,8 +2089,8 @@ Default: 3 mm Шаг на дюйм - + Operation Операция @@ -3009,8 +3009,8 @@ Should multiple tools or tool shapes with the same name exist in different direc Использовать маппинг осей - + Radius Радиус @@ -3425,8 +3425,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Симулятор пути @@ -4314,10 +4314,9 @@ For example: Больше не показывать - + Edit - int = field(default=None) Редактировать @@ -4459,8 +4458,8 @@ For example: Непланарный адаптивный пуск также недоступен. - + %s is not a Base Model object of the job %s %s не является базовым объектом для задания %s @@ -4480,8 +4479,8 @@ For example: Обработать всю модель, выбранные грани или выбранные края - + Choose a Path Job Выбрать задание Path (траектория обработки детали) @@ -4585,6 +4584,7 @@ For example: List of custom property groups + int = field(default=None) Список групп пользовательских свойств @@ -4647,12 +4647,12 @@ For example: + + - - The base path to modify Базовый путь для модификации @@ -4946,9 +4946,9 @@ For example: Коллекция всех контроллеров инструментов для обработки + - Operations Cycle Time Estimation Оценка времени цикла операций @@ -5033,8 +5033,8 @@ For example: Номер отступа крепления - + Make False, to prevent operation from generating code Установите значение в False, чтобы предотвратить генерацию G-кода для операции @@ -5054,8 +5054,8 @@ For example: Влияет на точность и производительность - + Percent of cutter diameter to step over on each pass Процент диаметра фрезы, который необходимо преодолеть при каждом проходе @@ -5231,10 +5231,10 @@ For example: Начальная точка этой траектории - - - + + + Make True, if specifying a Start Point Установить в Истину, если указывается начальная точка @@ -5348,9 +5348,9 @@ For example: Применение отвода G99: отвод только на высоту отвода между отверстиями в этой операции - + Additional base objects to be engraved Дополнительные базовые объекты для гравировки @@ -5391,9 +5391,9 @@ For example: Радиус начала - + Extra value to stay away from final profile- good for roughing toolpath Дополнительное расстояние на котором нужно оставаться от финального профиля - хорош для черновых обработок @@ -5413,9 +5413,9 @@ For example: Исключить фрезеровку частей детали, приподнятых относительно выбранной поверхности. - - + + Choose how to process multiple Base Geometry features. Выберите способ обработки нескольких элементов базовой геометрии. @@ -5436,8 +5436,8 @@ For example: Обработать модель и заготовку без учета ранее заданных припусков, размеров заготовки. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Направление, в котором траектория должна проходить вокруг детали по часовой стрелке (по часовой стрелке) или против часовой стрелки (против часовой стрелки) @@ -5544,8 +5544,8 @@ For example: Установить в Истину, если используется компенсация радиуса инструмента - + Show the temporary path construction objects when module is in DEBUG mode. Показать объекты построения временного пути обработки, когда модуль находится в режиме DEBUG. @@ -5561,8 +5561,8 @@ For example: Задать конечную точку для траектории паза. - + Set the geometric clearing pattern to use for the operation. Установить шаблон геометрической очистки (чистовой обработки) для использования в операции. @@ -5578,8 +5578,8 @@ For example: Положительные расширяют конец траектории, отрицательные сокращают. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Завершите операцию за один проход на глубину или за несколько проходов до конечной глубины. @@ -5610,8 +5610,8 @@ For example: Включить обратное направление пути выреза паза. - + The custom start point for the path of this operation Пользовательская начальная точка пути этой операции @@ -6126,24 +6126,24 @@ For example: Path_Dressup - + Please select one path object Пожалуйста выберете один объект пути - + The selected object is not a path Выделенный объект не является траекторией обработки - + Please select a Path object Пожалуйста выберите траекторию @@ -6300,8 +6300,8 @@ For example: Выберите файл точки измерения - + All Files (*.*) Все файлы (*.*) @@ -7032,14 +7032,14 @@ For example: PathProfile - + Outside Снаружи - + Inside Внутри diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index c9c99b3861..98a4474e21 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -713,17 +713,17 @@ Pri surovcih z očrtnim kvadrom izhodiščnega predmeta to pomeni dodaten materi Počisti seznam izhodiščnih geometrij - + Add Dodaj - - + + Remove Odstrani @@ -778,8 +778,8 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Ponastavi - + All objects will be processed using the same operation properties. Vsi predmeti bodo obdelani z dejanji, ki imajo enake lastnosti. @@ -824,32 +824,32 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Vsa mesta bodo obdelana z dejanji, ki imajo enake lastnosti. - + Start Depth Začetna globina - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Začetna globina dejanja. Najvišja točka na osi Z, ki jo mora dejanje obdelati. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Prenesi vrednost Z izbrane značilnosti kot začetno globino dejanja. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Globina dejanja, ki odgovarja najnižji vrednosti na osi Z in jo mora dejanje obdelati. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Prenesi vrednost Z izbrane značilnosti kot končno globino dejanja. @@ -864,14 +864,14 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Globina zadnjega reza dejanja. Služi lahko doseganju gladkejše zaključne obdelave. - + Final Depth Končna globina - + Step Down Poglobitveni korak @@ -911,34 +911,34 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Prosta višina - + + + + - - - - + The tool and its settings to be used for this operation. Orodje in njegove nastavitve za to dejanje. + + + + + + + + + + - - - - - - - - - - Coolant Mode Hladilni način @@ -948,28 +948,28 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi G-koda - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Orodni krmilnik - - + + Coolant Hladilo @@ -989,8 +989,8 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Vrsta dejanja - + Step Over Percent Odstotek zmika @@ -1040,8 +1040,8 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Dokončevalni oris - + Use Outline Uporabi obris @@ -1096,10 +1096,10 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Ustavi - + - + Direction Smer @@ -1109,15 +1109,15 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Smer izvajanje orisa; v smeri urinega kazalca ali v nasprotni smeri urinega kazalca. - + CW SUK, v smeri urinega kazalca - + CCW NSUK, v nasprotni smeri urinega kazalca @@ -1142,6 +1142,8 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Spoj na zajero + + @@ -1151,8 +1153,6 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi - - mm mm @@ -1368,11 +1368,11 @@ Ponastavitev izbriše vse trenutne predmete s seznama in izpolni seznam z vsemi Vzorec + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Napuščeno gradivo + - Use Start Point Uporabi začetno točko @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Podaljšanje konca poti - + Layer Mode Plastni način @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Vrsta odčitavanja - + Cut Pattern Rezkalni vzorec @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Izogibanje zadnjim X ploskvam - + Bounding Box Očrtni kvader - + Select the overall boundary for the operation. Izberite skupno mejo za dejanje. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Ravninsko: Plosko, 3D odčitavanje površja. Sukajoče: optično prebiranje z vrtenjem okrog 4. osi. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Končaj dejanje v enem prehodu na globini ali postopno z večkratnim prehodom do končne globine. - + Set the geometric clearing pattern to use for the operation. Določi za opravilo geometrični vzorec čiščenja. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Poteze spustnega rezkanja bodo vzporedne tej osi. - + Set the Z-axis depth offset from the target surface. Določite globinski odmik od tarčnega povšja po osi Z. - + Set the sampling resolution. Smaller values quickly increase processing time. Določite ločlivost vzorčenja. Z manjšanjem vrednosti se hitro povečuje obdelovalni čas. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Mastavite na Resnično, za določanje začetne točke - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Omogoči optimiranje premih poti (sopreme točke). Odstrani iz izvoza G-Code nepotrebne sopreme točke. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Zamik globine - + Step over Zmik - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. Več kot stoodstotni zmik pomeni, da se pri ponovitvi vzorec ne prekriva. - + Sample interval Vzorčni korak - + Optimize Linear Paths Optimiraj preme poti @@ -2061,8 +2061,8 @@ Privzeto: 3 mm Usmerjenost - + Type Vrsta @@ -2092,8 +2092,8 @@ Privzeto: 3 mm NNP - + Operation Dejanje @@ -3014,8 +3014,8 @@ Navadno se priporoča uporabo odnosnih poti zaradi njihove prilagodljivosti in n Dodelava PreslikavaOsi - + Radius Polmer @@ -3430,8 +3430,8 @@ Navadno se priporoča uporabo odnosnih poti zaradi njihove prilagodljivosti in n TaskPathSimulator - + Path Simulator Priustvarjalnik poti @@ -4322,10 +4322,9 @@ For example: Ne prikazuj več tega - + Edit - int = field(default=None) Uredi @@ -4467,8 +4466,8 @@ For example: Tudi neravninsko prilagodljiv začetek ni na voljo. - + %s is not a Base Model object of the job %s %s ni osnovno modelni predmet opravila %s @@ -4488,8 +4487,8 @@ For example: Oriši celoten oblikovanec, izbrane ploskve ali izbrane robove - + Choose a Path Job Izberite opravilo poti @@ -4593,6 +4592,7 @@ For example: List of custom property groups + int = field(default=None) Seznam lastnostnih skupin po meri @@ -4655,12 +4655,12 @@ For example: + + - - The base path to modify Osnovna pot za spreminjanje @@ -4954,9 +4954,9 @@ For example: Nabor vseh orodnih krmilnikov za opravilo + - Operations Cycle Time Estimation Ocena časa cikla dejanja @@ -5041,8 +5041,8 @@ For example: Število odmika pritrdila - + Make False, to prevent operation from generating code Spremeni v Napak, da se opravilu prepreči ustvarjanje kode @@ -5062,8 +5062,8 @@ For example: Vpliva na natančnost in učinkovitost - + Percent of cutter diameter to step over on each pass Zmik pri vsakem prehodu, izražen v deležu premera rezalnika @@ -5239,10 +5239,10 @@ For example: Začetna točka te poti - - - + + + Make True, if specifying a Start Point Mastavite na Resnično za določanje začetne točke @@ -5356,9 +5356,9 @@ For example: Uveljavi vračanje G99: vračanje na višino vračanje med izvrtinami le v tem dejanju - + Additional base objects to be engraved Dodatni osnovni predmet, ki naj bo vrezan @@ -5399,9 +5399,9 @@ For example: Začetni polmer - + Extra value to stay away from final profile- good for roughing toolpath Dodatna vrednost za izogibanje končnemu profilu - primerno za pot orodja grobe obdelave @@ -5421,9 +5421,9 @@ For example: Izvzemi rezkanje dvignjenih površin znotraj ploskve. - - + + Choose how to process multiple Base Geometry features. Izberite, kako naj se obdeluje značilnosti več osnovnih geometrij. @@ -5444,8 +5444,8 @@ For example: Obdelaj obdelovanec in surovec z dejanjem brez izbrane izhodiščne geometrije. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) Smer, po kateri naj gre pot orodja okoli dela v SUK (smeri urinega kazalca) ali NSUK (nasprotni smeri urinega kazalca) @@ -5552,8 +5552,8 @@ For example: Nastavi na Prav, če se uporablja Popravek polmera rezkarja - + Show the temporary path construction objects when module is in DEBUG mode. Ko je modul v razhroščevalnem načinu, prikaži pomožni predmet za ustvarjanje poti. @@ -5569,8 +5569,8 @@ For example: Vnesite lastno končno točko utorove poti. - + Set the geometric clearing pattern to use for the operation. Določi za dejanje geometrični vzorec čiščenja. @@ -5586,8 +5586,8 @@ For example: Pozitivno podaljša konec poti, negativno pa ga skrajša. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Končaj dejanje v enem prehodu na globini ali postopno z večkratnim prehodom do končne globine. @@ -5618,8 +5618,8 @@ For example: Omogočite, če želite obrniti smer rezkanja utorove poti. - + The custom start point for the path of this operation Uporabniko določena začetna točka poti tega dejanja @@ -6134,24 +6134,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6308,8 +6308,8 @@ For example: Select Probe Point File - + All Files (*.*) Vse datoteke (*.*) @@ -7040,14 +7040,14 @@ For example: PathProfile - + Outside Zunaj - + Inside Znotraj diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts index c6451e0aee..293283c30b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Dodaj - - + + Remove Ukloni @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Resetuj - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Kod - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Rashladna tečnost @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Zaustavi - + - + Direction Pravac @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW SKS - + CCW SSKS @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Spoj pod 45 stepeni + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1415,7 +1415,7 @@ The latter can be used to face of the entire stock area to ensure uniform height Line - Linija + Duž @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Step over - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orijentacija - + Type Vrsta @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Poluprečnik @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Simulator putanje @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Uredi @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Sve Datoteke (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside @@ -7174,7 +7174,7 @@ For example: Line - Linija + Duž @@ -7230,7 +7230,7 @@ For example: Line - Linija + Duž @@ -7544,7 +7544,7 @@ For example: Line - Linija + Duž @@ -7854,7 +7854,7 @@ For example: Line - Linija + Duž diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index b027cc84b1..4b0716154f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Додај - - + + Remove Уклони @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Ресетуј - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Код - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Расхладна течност @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Заустави - + - + Direction Правац @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW СКС - + CCW ССКС @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Спој под 45 степени + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm мм @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1415,7 +1415,7 @@ The latter can be used to face of the entire stock area to ensure uniform height Line - Линија + Дуж @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Step over - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Оријентација - + Type Врста @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Полупречник @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Симулатор путање @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Уреди @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Све Датотеке (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside @@ -7174,7 +7174,7 @@ For example: Line - Линија + Дуж @@ -7230,7 +7230,7 @@ For example: Line - Линија + Дуж @@ -7544,7 +7544,7 @@ For example: Line - Линија + Дуж @@ -7854,7 +7854,7 @@ For example: Line - Линија + Дуж diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index 0dbb0a3d19..3ea44109ba 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Lägg till - - + + Remove Ta bort @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Återställ - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Kylmedel @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Slutför profil - + Use Outline Använd kontur @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Stopp - + - + Direction Riktning @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Mönster + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Använd startpunkt @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Lagerläge @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Klipp ut mönster @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Stega förbi - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientering - + Type Typ @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radie @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Visa inte detta längre - + Edit - int = field(default=None) Redigera @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Alla filer (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Utanför - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 8ed27d30a2..ccde145876 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Ekle - - + + Remove Kaldır @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Sıfırla - + All objects will be processed using the same operation properties. Tüm nesneler aynı işlem özellikleri kullanılarak işlenecektir. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul Tüm konumlar aynı işlem özellikleri kullanılarak işlenecektir. - + Start Depth Başlangıç Derinliği - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Bitiş Derinliği - + Step Down Aşağı Yönde Adım Atınız @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Aralık Yüksekliği - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Soğutucu Modu @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Kodu - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Araç Denetleyicisi - - + + Coolant Soğutma sıvısı @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul İşlem Türü - + Step Over Percent Yüzde üzerinden adımla @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Sonlandırma Profili - + Use Outline Dış Hattı Kullan @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Dur - + - + Direction Yön @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW Saat Yönü - + CCW Saat Yönünün Tersi @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Desen + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Malzemenin Toleransı + - Use Start Point Başlangıç Noktasını Kullan @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height İzin Sonunu Uzatınız - + Layer Mode Katman Kipi @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Tarama Türü - + Cut Pattern Kesme Deseni @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Son X Yüzeylerinden kaçın - + Bounding Box Kapsayan Kutu - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Derinlik sapması - + Step over Üzerinden atla - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Örnekle aralığı - + Optimize Linear Paths Doğrusal Yolları En İyi Hale Getir @@ -2062,8 +2062,8 @@ Default: 3 mm Yönlendirme - + Type Türü @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation İşlem @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc Eksen Eşlemesi Donatımı - + Radius Yarıçap @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator İz Simülatörü @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Düzenle @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Bir İz İşi Seçiniz @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Tüm dosyalar (*. *) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Dışarıda - + Inside İçeride diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 8fb7d26145..1162e56d23 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Додати - - + + Remove Видалити @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Скинути - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Початкова глибина - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Остаточна глибина - + Step Down Розмір кроку @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Висота перешкод - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Інструмент - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Тип операції - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Стоп - + - + Direction Напрямок @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul Напрямок, в якому виконується профіль, за годинниковою стрілкою або проти годинникової стрілки. - + CW за годинниковою стрілкою - + CCW проти годинникової стрілки @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul З'єднання мітерів + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm мм @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Шаблон + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Використовувати початкову точку @@ -1732,9 +1732,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1774,8 +1774,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1790,14 +1790,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Обмежувальна рамка - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1807,14 +1807,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1839,14 +1839,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1856,8 +1856,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1892,14 +1892,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Крок за кроком - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1908,14 +1908,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2063,8 +2063,8 @@ Default: 3 mm Орієнтація - + Type Тип @@ -2094,8 +2094,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3016,8 +3016,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Радіус @@ -3432,8 +3432,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4325,10 +4325,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Правка @@ -4470,8 +4469,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4491,8 +4490,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4596,6 +4595,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4658,12 +4658,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4957,9 +4957,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5044,8 +5044,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5065,8 +5065,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5242,10 +5242,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5359,9 +5359,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5402,9 +5402,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5424,9 +5424,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5447,8 +5447,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5555,8 +5555,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5572,8 +5572,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5589,8 +5589,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5621,8 +5621,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6137,24 +6137,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6311,8 +6311,8 @@ For example: Select Probe Point File - + All Files (*.*) Всі файли (*.*) @@ -7043,14 +7043,14 @@ For example: PathProfile - + Outside Ззовні - + Inside Всередині diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 1c8827ace9..43817aef9f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add Afegir - - + + Remove Elimina @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul Reinicialitza - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth Start Depth - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth Final Depth - + Step Down Step Down @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode Coolant Mode @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G Gode - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant Coolant @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent Step Over Percent @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul Para - + - + Direction Direcció @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over Passa al següent - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm Orientació - + Type Tipus @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operació @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius Radi @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator Path Simulator @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) Edita @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) Tots els fitxers (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside Outside - + Inside Inside diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index 964157d973..b9c17c1b74 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all 清除基础几何图形列表 - + Add 添加 - - + + Remove 删除 @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul 重设 - + All objects will be processed using the same operation properties. 所有对象都将使用相同的加工属性进行处理。 @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul 所有位置都将使用相同的加工属性进行处理。 - + Start Depth 起始深度 - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. 加工的开始深度。加工需要处理的Z轴上的最高点。 - + Transfer the Z value of the selected feature as the Start Depth for the operation. 将选定特征的Z值传递为加工的“开始深度”。 - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. 与加工需要处理的Z轴上的最低值相对应的加工深度。 - + Transfer the Z value of the selected feature as the Final Depth for the operation. 将选定特征的Z值传递为加工的“最终深度”。 @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul 加工的最终切割深度。可用于生产更清洁的表面。 - + Final Depth 完工深度 - + Step Down 步长 @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul 净空高度 - + + + + - - - - + The tool and its settings to be used for this operation. 用于此加工的刀具及其设置。 + + + + + + + + + + - - - - - - - - - - Coolant Mode 冷却液模式 @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G代码 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller 刀具控制器 - - + + Coolant 冷却液 @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul 加工类型 - + Step Over Percent 步距百分比 @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul 精加工轮廓 - + Use Outline 使用轮廓 @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul 停止 - + - + Direction 方向 @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul 执行轮廓铣的方向，顺时针或逆时针。 - + CW 顺时针 - + CCW 逆时针 @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul 斜接 + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul 模式 + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height 材料余量 + - Use Start Point 使用起点 @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height 扩展刀轨终点 - + Layer Mode 分层模式 @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height 扫描类型 - + Cut Pattern 切割模式 @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height 避开最后X个面 - + Bounding Box 边界框 - + Select the overall boundary for the operation. 选择加工的总体边界。 @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height 平面：平面、三维表面扫描。旋转：4轴旋转扫描。 - + Complete the operation in a single pass at depth, or multiple passes to final depth. 仅一次便实现最终加工深度，或多次递进加工以实现最终深度。 - + Set the geometric clearing pattern to use for the operation. 设置用于加工的几何清除模式。 @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height 创建的Dropcutter线与该轴平行。 - + Set the Z-axis depth offset from the target surface. 设置相对于目标曲面的Z轴深度偏移。 - + Set the sampling resolution. Smaller values quickly increase processing time. 设置采样分辨率。较小的值会迅速增加处理时间。 @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height 如果指定起点，则设为True - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. 启用线性刀轨（共线点）的优化。从G代码输出中删除不必要的共线点。 @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height 深度偏移 - + Step over 步距 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. 100%的步距导致两个不同循环之间没有重叠。 - + Sample interval 采样间隔 - + Optimize Linear Paths 优化线性刀轨 @@ -2062,8 +2062,8 @@ Default: 3 mm 方向 - + Type 类型 @@ -2093,8 +2093,8 @@ Default: 3 mm TPI(螺纹数/英寸) - + Operation 加工 @@ -3014,8 +3014,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius 半径 @@ -3430,8 +3430,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator 刀轨模拟器 @@ -4322,10 +4322,9 @@ For example: 不再显示 - + Edit - int = field(default=None) 编辑 @@ -4467,8 +4466,8 @@ For example: 非平面自适应启动也不可用。 - + %s is not a Base Model object of the job %s %s不是作业%s的基本模型对象 @@ -4488,8 +4487,8 @@ For example: 对整个模型、选定面或选定边进行轮廓铣 - + Choose a Path Job 选择一个刀轨作业 @@ -4593,6 +4592,7 @@ For example: List of custom property groups + int = field(default=None) 自定义特性组列表 @@ -4655,12 +4655,12 @@ For example: + + - - The base path to modify 要修改的基础刀轨 @@ -4954,9 +4954,9 @@ For example: 作业的所有刀具控制器的集合 + - Operations Cycle Time Estimation 加工周期时间估算 @@ -5041,8 +5041,8 @@ For example: 夹具偏移编号 - + Make False, to prevent operation from generating code 设为False，以防止加工生成代码 @@ -5062,8 +5062,8 @@ For example: 影响准确性和性能 - + Percent of cutter diameter to step over on each pass 每次通过时要跨过的刀具直径百分比 @@ -5239,10 +5239,10 @@ For example: 此刀轨的起点 - - - + + + Make True, if specifying a Start Point 如果指定起点，则设为True @@ -5356,9 +5356,9 @@ For example: 应用G99回缩：此加工中仅回缩到孔之间的回缩高度 - + Additional base objects to be engraved Additional base objects to be engraved @@ -5399,9 +5399,9 @@ For example: 起始半径 - + Extra value to stay away from final profile- good for roughing toolpath 远离最终轮廓的额外值——有利于粗加工刀具路径 @@ -5421,9 +5421,9 @@ For example: 不包括铣削面内的凸起区域。 - - + + Choose how to process multiple Base Geometry features. 选择如何处理多个基础几何体特征。 @@ -5444,8 +5444,8 @@ For example: 在未选择“基础几何图形”的情况下，在加工中处理模型和毛坯。 - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) 刀具路径围绕零件顺时针（CW）或逆时针（CCW）的方向 @@ -5552,8 +5552,8 @@ For example: 如果使用“刀具半径补偿”，则设为True - + Show the temporary path construction objects when module is in DEBUG mode. 当模块处于DEBUG模式时，显示临时刀轨构造对象。 @@ -5569,8 +5569,8 @@ For example: 输入拉槽刀轨的自定义终点。 - + Set the geometric clearing pattern to use for the operation. 设置用于加工的几何清除模式。 @@ -5586,8 +5586,8 @@ For example: 正值延伸刀轨的终点，负值缩短刀轨的终点。 - + Complete the operation in a single pass at depth, or multiple passes to final depth. 一次完成最终加工深度，或在多次递进加工完成最终深度。 @@ -5618,8 +5618,8 @@ For example: 启用以反转拉槽刀轨的切割方向。 - + The custom start point for the path of this operation 此加工刀轨的自定义起点 @@ -6134,24 +6134,24 @@ For example: Path_Dressup - + Please select one path object 请选择一个刀轨对象 - + The selected object is not a path 所选对象不是一个刀轨 - + Please select a Path object 请选择一个刀轨对象 @@ -6308,8 +6308,8 @@ For example: 选择探测点文件 - + All Files (*.*) 所有文件(*.*) @@ -7039,14 +7039,14 @@ For example: PathProfile - + Outside 外部 - + Inside 内部 diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 01b167d628..50c67c4090 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -713,17 +713,17 @@ For stock from the Base object's bounding box it means the extra material in all Clears list of base geometries - + Add 新增 - - + + Remove 移除 @@ -778,8 +778,8 @@ Reset deletes all current items from the list and fills the list with all circul 重設 - + All objects will be processed using the same operation properties. All objects will be processed using the same operation properties. @@ -824,32 +824,32 @@ Reset deletes all current items from the list and fills the list with all circul All locations will be processed using the same operation properties. - + Start Depth 起始深度 - + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Start Depth of the operation. The highest point in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Start Depth for the operation. Transfer the Z value of the selected feature as the Start Depth for the operation. - + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. - + Transfer the Z value of the selected feature as the Final Depth for the operation. Transfer the Z value of the selected feature as the Final Depth for the operation. @@ -864,14 +864,14 @@ Reset deletes all current items from the list and fills the list with all circul Depth of the final cut of the operation. Can be used to produce a cleaner finish. - + Final Depth 最終深度 - + Step Down 步進深度 @@ -911,34 +911,34 @@ Reset deletes all current items from the list and fills the list with all circul Clearance Height - + + + + - - - - + The tool and its settings to be used for this operation. The tool and its settings to be used for this operation. + + + + + + + + + + - - - - - - - - - - Coolant Mode 冷卻劑模式 @@ -948,28 +948,28 @@ Reset deletes all current items from the list and fills the list with all circul G 碼 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Tool Controller Tool Controller - - + + Coolant 冷卻劑 @@ -989,8 +989,8 @@ Reset deletes all current items from the list and fills the list with all circul Operation Type - + Step Over Percent 路徑重疊百分比 @@ -1040,8 +1040,8 @@ Reset deletes all current items from the list and fills the list with all circul Finishing Profile - + Use Outline Use Outline @@ -1096,10 +1096,10 @@ Reset deletes all current items from the list and fills the list with all circul 停止 - + - + Direction 方向 @@ -1109,15 +1109,15 @@ Reset deletes all current items from the list and fills the list with all circul The direction in which the profile is performed, clockwise or counterclockwise. - + CW CW - + CCW CCW @@ -1142,6 +1142,8 @@ Reset deletes all current items from the list and fills the list with all circul Miter joint + + @@ -1151,8 +1153,6 @@ Reset deletes all current items from the list and fills the list with all circul - - mm mm @@ -1368,11 +1368,11 @@ Reset deletes all current items from the list and fills the list with all circul Pattern + + - - The tool and its settings to be used for this operation @@ -1473,9 +1473,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Material Allowance + - Use Start Point Use Start Point @@ -1731,9 +1731,9 @@ The latter can be used to face of the entire stock area to ensure uniform height Extend Path End - + Layer Mode Layer Mode @@ -1773,8 +1773,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Scan Type - + Cut Pattern Cut Pattern @@ -1789,14 +1789,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Avoid Last X Faces - + Bounding Box Bounding Box - + Select the overall boundary for the operation. Select the overall boundary for the operation. @@ -1806,14 +1806,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -1838,14 +1838,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Dropcutter lines are created parallel to this axis. - + Set the Z-axis depth offset from the target surface. Set the Z-axis depth offset from the target surface. - + Set the sampling resolution. Smaller values quickly increase processing time. Set the sampling resolution. Smaller values quickly increase processing time. @@ -1855,8 +1855,8 @@ The latter can be used to face of the entire stock area to ensure uniform height Make True, if specifying a Start Point - + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. @@ -1891,14 +1891,14 @@ The latter can be used to face of the entire stock area to ensure uniform height Depth offset - + Step over 跨越 - + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. @@ -1907,14 +1907,14 @@ A step over of 100% results in no overlap between two different cycles. A step over of 100% results in no overlap between two different cycles. - + Sample interval Sample interval - + Optimize Linear Paths Optimize Linear Paths @@ -2062,8 +2062,8 @@ Default: 3 mm 定位 - + Type 類型 @@ -2093,8 +2093,8 @@ Default: 3 mm TPI - + Operation Operation @@ -3015,8 +3015,8 @@ Should multiple tools or tool shapes with the same name exist in different direc AxisMap Dressup - + Radius 半徑 @@ -3431,8 +3431,8 @@ Should multiple tools or tool shapes with the same name exist in different direc TaskPathSimulator - + Path Simulator 路徑模擬 @@ -4324,10 +4324,9 @@ For example: Don't Show This Anymore - + Edit - int = field(default=None) 編輯 @@ -4469,8 +4468,8 @@ For example: The non-planar adaptive start is also unavailable. - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4490,8 +4489,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -4595,6 +4594,7 @@ For example: List of custom property groups + int = field(default=None) List of custom property groups @@ -4657,12 +4657,12 @@ For example: + + - - The base path to modify The base path to modify @@ -4956,9 +4956,9 @@ For example: Collection of all tool controllers for the job + - Operations Cycle Time Estimation Operations Cycle Time Estimation @@ -5043,8 +5043,8 @@ For example: Fixture Offset Number - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -5064,8 +5064,8 @@ For example: Influences accuracy and performance - + Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -5241,10 +5241,10 @@ For example: The start point of this path - - - + + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -5358,9 +5358,9 @@ For example: Apply G99 retraction: only retract to RetractHeight between holes in this operation - + Additional base objects to be engraved Additional base objects to be engraved @@ -5401,9 +5401,9 @@ For example: Starting Radius - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -5423,9 +5423,9 @@ For example: Exclude milling raised areas inside the face. - - + + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -5446,8 +5446,8 @@ For example: Process the model and stock in an operation with no Base Geometry selected. - + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -5554,8 +5554,8 @@ For example: Make True, if using Cutter Radius Compensation - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -5571,8 +5571,8 @@ For example: Enter custom end point for slot path. - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -5588,8 +5588,8 @@ For example: Positive extends the end of the path, negative shortens. - + Complete the operation in a single pass at depth, or multiple passes to final depth. Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -5620,8 +5620,8 @@ For example: Enable to reverse the cut direction of the slot path. - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -6136,24 +6136,24 @@ For example: Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -6310,8 +6310,8 @@ For example: Select Probe Point File - + All Files (*.*) 所有檔 (*.*) @@ -7042,14 +7042,14 @@ For example: PathProfile - + Outside 外面 - + Inside 裡面 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot.ts b/src/Mod/Robot/Gui/Resources/translations/Robot.ts index d797aaa9cb..3c6badb3b0 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection @@ -381,11 +381,11 @@ - + Select one Robot and one Trajectory object. @@ -474,7 +474,7 @@ - + Modify diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts index 7d6e09f9ba..f9a98c9346 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_be.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Няправільны выбар @@ -381,11 +381,11 @@ Абраць адзін Робат - + Select one Robot and one Trajectory object. Абраць адзін Робат і адну траекторыю аб'екта. @@ -474,7 +474,7 @@ Абраць траекторыю, якую патрэбна палепшыць. - + Modify Змяніць diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts index d8fa070e7a..5f8c645615 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecció incorrecta @@ -381,11 +381,11 @@ Selecciona un Robot - + Select one Robot and one Trajectory object. Selecciona un Robot i un objecte de trajectòria. @@ -474,7 +474,7 @@ Seleccionar la trajectòria que vol modificar. - + Modify Modifica diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts index 5f18c1ebe6..5642dcf410 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Neplatný výběr @@ -381,11 +381,11 @@ Vyberte robota - + Select one Robot and one Trajectory object. Vyberte jednoho robota a objekt jedné trakjektorie. @@ -474,7 +474,7 @@ Vyberte trajektrorii, kterou chcete nastavit. - + Modify Upravit diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts index 40954a4874..e31671a77f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Falsche Auswahl @@ -381,11 +381,11 @@ Einen Roboter auswählen - + Select one Robot and one Trajectory object. Wählen Sie einen Roboter und eine Bewegungsbahn. @@ -475,7 +475,7 @@ Siehe Dokumentation für Details. Wählen Sie die Bewegungsbahn die Sie verwenden wollen. - + Modify Bearbeiten diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts index 337621c2d8..8da49c9e66 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Λάθος επιλογή @@ -381,11 +381,11 @@ Επιλέξτε ένα Ρομπότ - + Select one Robot and one Trajectory object. Επιλέξτε ένα Ρομπότ και ένα Αντικείμενο Τροχιάς. @@ -474,7 +474,7 @@ Επιλέξτε την Τροχιά που θέλετε να αναδιαμορφώσετε. - + Modify Τροποποίηση diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts index c7c16ad1d2..687d00e642 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selección Incorrecta @@ -381,11 +381,11 @@ Seleccionar un Robot - + Select one Robot and one Trajectory object. Seleccione un Robot y un objeto de Trayectoria. @@ -474,7 +474,7 @@ Seleccionar la trayectoria que desea disfrazar. - + Modify Modificar diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts index 783cb99b34..d64118f388 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selección incorrecta @@ -381,11 +381,11 @@ Seleccione un Robot - + Select one Robot and one Trajectory object. Seleccione un robot y un objeto trayectoria. @@ -474,7 +474,7 @@ Seleccione la Trayectoria que desea cubrir. - + Modify Modificar diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts index 086373e8e0..79c1f97bd4 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Hautapen okerra @@ -381,11 +381,11 @@ Hautatu robot bat - + Select one Robot and one Trajectory object. Hautatu robot bat eta ibilbide-objektu bat. @@ -474,7 +474,7 @@ Hautatu jantzi nahi duzun ibilbidea. - + Modify Aldatu diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts index 6e6149c825..8cf2cc0a6a 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Väärä valinta @@ -381,11 +381,11 @@ Valitse yksi robotti - + Select one Robot and one Trajectory object. Valitse yksi robotti ja yksi liikeradan objekti. @@ -474,7 +474,7 @@ Valitse liikerata, jonka haluat luoda. - + Modify Muokkaa diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts index eddea48941..fae14135ff 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Mauvaise sélection @@ -381,11 +381,11 @@ Sélectionnez un robot - + Select one Robot and one Trajectory object. Sélectionnez un robot et une trajectoire. @@ -475,7 +475,7 @@ pour utiliser cette commande. Consultez la documentation pour plus de détails.< Sélectionnez la trajectoire que vous voulez habiller. - + Modify Modifier diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts index b2b9a6420b..1a27322382 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Escolma errada @@ -381,11 +381,11 @@ Escolmar un Robot - + Select one Robot and one Trajectory object. Escolmar un robot mais un obxecto traxectoria. @@ -474,7 +474,7 @@ Escolme a traxectoria que quere cubrir. - + Modify Modificar diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts index 14b097057e..1f7cf55b61 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Pogrešan odabir @@ -381,11 +381,11 @@ Odaberite jedan Robot - + Select one Robot and one Trajectory object. Odaberite jedan robot i jedanu putanju objekta. @@ -474,7 +474,7 @@ Odaberite putanju koju želite doraditi. - + Modify Izmjene @@ -819,7 +819,7 @@ Type - Vrsta + Tip diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts index e454446d26..670290542b 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Rossz kiválasztás @@ -381,11 +381,11 @@ Válasszon ki egy robotot - + Select one Robot and one Trajectory object. Egy Robot és egy útvonal objektum kijelölése. @@ -474,7 +474,7 @@ Válassza ki a megváltoztatni kívánt pályát. - + Modify Módosít diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts index 326f57b85c..0bff826128 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Pilihan salah @@ -381,11 +381,11 @@ Pilih satu Robot - + Select one Robot and one Trajectory object. Pilih satu Robot dan satu objek lintasan. @@ -474,7 +474,7 @@ Select the Trajectory which you want to dress up. - + Modify Modifikasi diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts index 9008e2927f..4414eca537 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selezione errata @@ -381,11 +381,11 @@ Selezionare un Robot - + Select one Robot and one Trajectory object. Selezionare un Robot e un oggetto Traiettoria. @@ -474,7 +474,7 @@ Selezionare la traiettoria da vestire. - + Modify Modifica diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts index 9e6de5103f..28c7b889b4 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 誤った選択 @@ -381,11 +381,11 @@ 1台のロボットを選択する - + Select one Robot and one Trajectory object. 1 つのロボットと軌道オブジェクトを 1 つ選択します。 @@ -474,7 +474,7 @@ ドレスアップする軌道を選択 - + Modify 変更 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts index 8ae32d5e2e..33aaaeaf20 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection არასწორი არჩევანი @@ -381,11 +381,11 @@ ერთი რობოტის ჩასმა - + Select one Robot and one Trajectory object. აირჩიეთ ერთი რობოტი და ერთი ტრაექტორიის ობიექტი. @@ -474,7 +474,7 @@ აირჩიეთ გასაფორმებელი ტრაექტორია. - + Modify შეცვლა diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ko.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ko.ts index 54c0c01772..89a27ec4f4 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ko.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ko.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 잘못 된 선택 @@ -381,11 +381,11 @@ 로봇 하나 선택하기 - + Select one Robot and one Trajectory object. Select one Robot and one Trajectory object. @@ -474,7 +474,7 @@ Select the Trajectory which you want to dress up. - + Modify Modify diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts index 64e19f3234..f48b0abaa8 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Verkeerde selectie @@ -381,11 +381,11 @@ Selecteer een Robot - + Select one Robot and one Trajectory object. Selecteer één robot en één traject-object. @@ -474,7 +474,7 @@ Selecteer het traject dat u wilt aankleden. - + Modify Modificeer diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts index 2aaa2b35ab..4d508b5679 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Nieprawidłowy wybór @@ -381,11 +381,11 @@ Zaznacz jednego Robota - + Select one Robot and one Trajectory object. Wybierz jednego robota i jedną trasę pracy. @@ -474,7 +474,7 @@ Wybierz trasę pracy, którą chcesz wykonać. - + Modify Zmodyfikuj diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts index c95b167fe0..252d55dbad 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Seleção errada @@ -381,11 +381,11 @@ Selecione um robô - + Select one Robot and one Trajectory object. Selecione um robô e uma trajetória. @@ -474,7 +474,7 @@ Selecione a trajetória que você deseja vestir. - + Modify Modificar diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts index 67eea2abfb..423305db44 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Seleção errada @@ -381,11 +381,11 @@ Selecione um robô - + Select one Robot and one Trajectory object. Selecionar um Robô e um Objeto da Trajetória @@ -474,7 +474,7 @@ Selecione a trajetória que você deseja vestir (dress-up). - + Modify Modificar diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts index 77c02b7fdc..ff7463f704 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecţie greşită @@ -381,11 +381,11 @@ Selectaţi un Robot - + Select one Robot and one Trajectory object. Selectaţi un obiect Robot şi un obiect de Traiectorie. @@ -474,7 +474,7 @@ Selectaţi traiectoria pe care doriţi să o îmbrăcaţi. - + Modify Modifica diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts index 220c9708c4..6135b1bfc6 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Неверный выбор @@ -381,11 +381,11 @@ Выберите одного робота - + Select one Robot and one Trajectory object. Выберите робота и траекторию движения. @@ -474,7 +474,7 @@ Выберите траекторию, которую вы хотите оформить. - + Modify Изменить diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts index 24b0ca8eb3..26ebc501ec 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Napačen izbor @@ -381,11 +381,11 @@ Izberite enega robota - + Select one Robot and one Trajectory object. Izberite enega robota in eno pot @@ -474,7 +474,7 @@ Izberite pot, ki jo želite dodelati. - + Modify Spremeni @@ -824,7 +824,7 @@ Name - Naziv + Ime diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sr-CS.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sr-CS.ts index 63abe4432a..9f65287703 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sr-CS.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sr-CS.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Pogrešan izbor @@ -381,11 +381,11 @@ Izaberi jednog Robota - + Select one Robot and one Trajectory object. Izaberi jednog Robota i jedan objekat Putanje. @@ -474,7 +474,7 @@ Izaberi Putanju koju želite da opremite. - + Modify Izmeni diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts index fbd94a6342..5fb684d63f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Погрешан избор @@ -381,11 +381,11 @@ Изабери једног Робота - + Select one Robot and one Trajectory object. Изабери једног Робота и један објекат Путање. @@ -474,7 +474,7 @@ Изабери Путању коју желиш да опремиш. - + Modify Измени diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts index 6a745086d5..2ecf140b29 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Fel val @@ -381,11 +381,11 @@ Välj en Robot - + Select one Robot and one Trajectory object. Välj en robot och ett banobjekt. @@ -474,7 +474,7 @@ Markera banan som du vill klä upp. - + Modify Modifiera diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts index df6c8ba53c..8dbaf3739f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts @@ -357,17 +357,17 @@ QObject - - - - - + + + + + Wrong selection Yanlış seçim @@ -382,11 +382,11 @@ Bir Robot seç - + Select one Robot and one Trajectory object. Bir Robot ve bir Yörünge nesnesi seçin. @@ -475,7 +475,7 @@ Giydirmek istediğiniz yörüngeyi seçin. - + Modify Değiştir diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts index 879514f5f5..d3d607219c 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Невірний вибір @@ -381,11 +381,11 @@ Оберіть одного Робота - + Select one Robot and one Trajectory object. Виберіть один робот і одну траєкторію об'єкта. @@ -474,7 +474,7 @@ Оберіть траєкторію, за якою буде відбуватися побудова зовнішнього покрову. - + Modify Змінити diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts index 3648329e0f..f4ff305278 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecció incorrecta @@ -381,11 +381,11 @@ Seleccioneu un robot - + Select one Robot and one Trajectory object. Seleccioneu un robot i una trajectòria @@ -474,7 +474,7 @@ Seleccioneu la trajectòria que voleu modificar - + Modify Modifica diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts index af39367cc7..fdb1f14e53 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 选择错误 @@ -381,11 +381,11 @@ 选择一个机器人 - + Select one Robot and one Trajectory object. 选择一个机器人和一个轨迹对象. @@ -474,7 +474,7 @@ 选择您要遵循的轨迹. - + Modify 修改 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts index 065b00926d..6ed8841aeb 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 錯誤的選取 @@ -381,11 +381,11 @@ 選取一機器人 - + Select one Robot and one Trajectory object. 選取一個機器人和一軌跡物件 @@ -474,7 +474,7 @@ 選取您想要修改的軌跡 - + Modify 修改 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index a3e604338b..da89c4ae52 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone - + Creates a clone of the geometry taking as reference the last selected point @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle - + Constrain an arc or a circle - + Constrain radius - + Constrain diameter - + Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone - + Creates a clone of the geometry taking as reference the last selected point @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle - + Fix the angle of a line or the angle between two lines @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter - + Fix the diameter of a circle or an arc @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance - + Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance - + Fix the horizontal distance between two points or line ends @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance - + Fix the vertical distance between two points or line ends @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal - + Create an equality constraint between two lines or between circles and arcs @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel - + Create a parallel constraint between two lines @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular - + Create a perpendicular constraint between two lines @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object - + Fix a point onto an object @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent - + Create a tangent constraint between two entities @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy - + Creates a simple copy of the geometry taking as reference the last selected point @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints - + Delete all constraints in the sketch @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1226,12 +1226,12 @@ as mirroring reference. CmdSketcherMove - + Move - + Moves the geometry taking as reference the last selected point @@ -1252,12 +1252,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1265,12 +1265,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1292,12 +1292,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry - + Show all internal geometry or hide unused internal geometry @@ -1305,8 +1305,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints @@ -1314,12 +1314,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints - + Select the constraints associated with the selected geometrical elements @@ -1327,12 +1327,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry - + Select the geometrical elements associated with the selected constraints @@ -1340,12 +1340,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1353,12 +1353,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis - + Select the local horizontal axis of the sketch @@ -1366,8 +1366,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints @@ -1375,12 +1375,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin - + Select the local origin point of the sketch @@ -1388,8 +1388,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints @@ -1397,8 +1397,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints @@ -1406,12 +1406,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis - + Select the local vertical axis of the sketch @@ -1458,12 +1458,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry - + Creates symmetric geometry with respect to the last selected line or point @@ -1471,12 +1471,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint - + Activates or deactivates the selected constraints @@ -1497,12 +1497,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode @@ -1589,54 +1589,54 @@ invalid constraints, degenerated geometry, etc. - + Add 'Block' constraint - + Add block constraint - - + + Add coincident constraint - - + + Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint - - + + Add point to point distance constraint - - + + Add point to line Distance constraint - - + + Add circle to circle distance constraint - + Add circle to line distance constraint @@ -1645,8 +1645,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint @@ -1768,159 +1768,159 @@ invalid constraints, degenerated geometry, etc. - + Add point to circle Distance constraint - - + + Add point on object constraint - - + + Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint - + Add fixed y-coordinate constraint - - + + Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint - + Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point - - - - + + + + Add radius constraint - - - - + + + + Add diameter constraint - - - - + + + + Add radiam constraint - - - - + + + + Add angle constraint - - + + Add equality constraint - - - - - + + + + + Add symmetric constraint - + Add Snell's law constraint - + Toggle constraint to driving/reference - + Activate/Deactivate constraint @@ -2091,47 +2091,47 @@ invalid constraints, degenerated geometry, etc. - + Cut in Sketcher - + Paste in Sketcher - + Exposing Internal Geometry - + Create symmetric geometry - + Copy/clone/move geometry - + Create copy of geometry - + Delete all geometry - + Delete All Constraints - + Remove Axes Alignment @@ -2149,8 +2149,8 @@ invalid constraints, degenerated geometry, etc. - + Add auto constraints @@ -2165,22 +2165,22 @@ invalid constraints, degenerated geometry, etc. - + Drag Point - + Drag Curve - + Drag Constraint - + Modify sketch constraints @@ -2219,6 +2219,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries + + + Translate geometries + + CommandGroup @@ -2323,16 +2328,16 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range @@ -2398,20 +2403,8 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - @@ -2422,133 +2415,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection @@ -2623,8 +2627,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint @@ -2640,8 +2644,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! @@ -2653,7 +2657,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. @@ -2678,29 +2682,29 @@ invalid constraints, degenerated geometry, etc. - + Select one edge from the sketch. - + Select only edges from the sketch. - + Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 + - Error @@ -2715,75 +2719,75 @@ invalid constraints, degenerated geometry, etc. - + Endpoint to endpoint tangency was applied instead. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an axis! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. @@ -2793,93 +2797,92 @@ invalid constraints, degenerated geometry, etc. - + Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. - - + + One selected edge is not a valid line. + + + + + Select at least two lines from the sketch. - - Select a valid line. - - - - - + The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2887,35 +2890,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. perpendicular constraint - - + + Cannot add a perpendicularity constraint at an unconnected point! - - + + One of the selected edges should be a line. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2923,67 +2926,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. tangent constraint - - - + + + Cannot add a tangency constraint at an unconnected point! - - + + Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! - - + + With 3 objects, there must be 2 curves and 1 point. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. - - + + Select one or two lines from the sketch. Or select two edges and a point. @@ -2998,88 +3001,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Cannot add an angle constraint on an axis! - + Select two edges from the sketch. - + Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. - - - + + + Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - + + Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Selected objects are not just geometry from one sketch. - + Cannot create constraint with external geometry only. - + Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. @@ -3101,9 +3104,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + CAD Kernel Error @@ -3179,69 +3182,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. - + No constraint selected - + At least one constraint must be selected - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. - + The last element must be a point or a line serving as reference for the symmetry construction. - - + + A copy requires at least one selected non-external geometric element - + Delete All Geometry - + Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints - + Are you really sure you want to delete all the constraints? - + Removal of axes alignment requires at least one selected non-external geometric element @@ -3322,6 +3325,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters + + + Translate parameters + + SketcherGui::CarbonCopySelection @@ -3632,12 +3640,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Refractive index ratio - + Ratio n2/n1: @@ -4050,12 +4058,12 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array + Create regular polygon - Number of Sides: + Number of sides: @@ -5033,119 +5041,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch - + A dialog is already open in the task panel - + Do you want to close this dialog? - + Invalid sketch - + Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. - + Please remove the following constraint: - + Please remove at least one of the following constraints: - + Please remove the following redundant constraint: - + Please remove the following redundant constraints: - + The following constraint is partially redundant: - + The following constraints are partially redundant: - + Please remove the following malformed constraint: - + Please remove the following malformed constraints: - + Empty sketch - + Over-constrained: - + Malformed constraints: - + Redundant constraints: - + Partially redundant: - + Solver failed to converge - + Under constrained: - + %n DoF(s) - + Fully constrained @@ -5216,8 +5224,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point @@ -5225,17 +5233,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone - + Copy - + Move @@ -5243,8 +5251,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc @@ -5252,8 +5260,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc @@ -5261,8 +5269,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc @@ -5270,8 +5278,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point @@ -5555,8 +5563,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point @@ -5875,7 +5883,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more @@ -6102,64 +6110,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error - + Failed to delete all geometry - + Failed to delete all constraints - - + + Invalid selection - + Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6169,18 +6178,18 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - - - - - + + + + + + + Invalid Constraint @@ -6220,8 +6229,8 @@ The grid spacing change if it becomes smaller than this number of pixel. - + Error creating B-spline @@ -6277,16 +6286,17 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - - - - - - + + + + + + + + + Tool execution aborted @@ -6321,9 +6331,9 @@ The grid spacing change if it becomes smaller than this number of pixel. + - Value Error @@ -6377,6 +6387,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale + + + Failed to translate + + Sketcher_CreateBSplineByInterpolation @@ -6573,12 +6588,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius - + Fix the radius of a circle or an arc @@ -6695,12 +6710,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6833,12 +6848,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6846,12 +6861,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7167,12 +7182,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher - + Copy selected geometries and constraints to the clipboard @@ -7180,12 +7195,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher - + Cut selected geometries and constraints to the clipboard @@ -7193,12 +7208,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher - + Paste selected geometries and constraints from the clipboard @@ -7206,14 +7221,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + + + + + Translate selected geometries. Enable creation of i * j copies. + + + + + TaskSketcherTool_c1_translate + + + Clone constraints + + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts index 330c5aef76..18e30df46a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_be.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Дублікат - + Creates a clone of the geometry taking as reference the last selected point Стварае клон геаметрыі, у якасці эталону ўжывае апошнюю абраную кропку @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Абмежаванне дугі альбо акружнасці - + Constrain an arc or a circle Абмежаванне дугі альбо акружнасці - + Constrain radius Абмежаванне радыуса - + Constrain diameter Абмежаванне дыяметра - + Constrain auto radius/diameter Аўтаматычнае абмежаванне радыуса/дыяметра @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Дублікат - + Creates a clone of the geometry taking as reference the last selected point Стварае дублікат геаметрыі, у якасці эталону ўжывае апошнюю абраную кропку @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Абмежаванне вугла - + Fix the angle of a line or the angle between two lines Фіксаваць вугал лініі ці вугал паміж дзвюма лініямі @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Абмежаванне накладання кропак - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Стварыць абмежаванне супадзення паміж кропкамі, ці канцэнтрычнае абмежаванне паміж акружнасцямі, дугамі і эліпсамі @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Абмежаванне дыяметра - + Fix the diameter of a circle or an arc Задаць дыяметр акружнасці ці дугі @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Абмежаванне адлегласці - + Fix a length of a line or the distance between a line and a vertex or between two circles Задаць даўжыню лініі, альбо адлегласць паміж лініяй і вяршыняй, альбо паміж дзвюма акружнасцямі @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Абмежаванне гарызантальнай адлегласці - + Fix the horizontal distance between two points or line ends Задаць адлегласць па гарызанталі паміж дзвюма кропкамі ці канцамі лініі @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Абмежаванне вертыкальнай адлегласці - + Fix the vertical distance between two points or line ends Задаць вертыкальную адлегласць паміж дзвюма кропкамі ці канцамі лініі @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Абмежаванне роўнасцю - + Create an equality constraint between two lines or between circles and arcs Стварыць абмежаванне роўнасці паміж дзвюма лініямі ці паміж акружнасцямі і дугамі @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Абмежаванне паралельнасці - + Create a parallel constraint between two lines Стварыць паралельнае абмежаванне паміж дзвюма лініямі @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Абмежаванне перпендыкулярнасці - + Create a perpendicular constraint between two lines Стварыць перпендыкулярнае абмежаванне паміж дзвюма адрэзкамі @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Абмежаваць кропку на аб'екце - + Fix a point onto an object Прывязаць кропку да аб'екта @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Аўтаматычнае абмежаванне радыуса/дыяметра - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Задаць дыяметр, калі абрана акружнасць, альбо радыус, калі абраны полюс дугі/сплайну @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Абмежаванне праламлення (закон Снеліуса) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Стварыць абмежаванне па закону праламлення свету (закон Снеліуса) паміж дзвюма канчатковымі кропкамі прамянёў і рабром у якасці мяжы падзелу асяроддзя. @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Абмежаванне сіметрычнасці - + Create a symmetry constraint between two points with respect to a line or a third point Стварыць абмежаванне сіметрыі паміж дзвюма кропкамі адносна лініі ці трэцяй кропкі @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Абмежаванне датычнай - + Create a tangent constraint between two entities Стварыць датычнае абмежаванне паміж дзвюма сутнасцямі @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Скапіраваць - + Creates a simple copy of the geometry taking as reference the last selected point Стварае просты клон геаметрыі, у якасці эталону бярэ апошнюю абраную кропку @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Выдаліць усе абмежаванні - + Delete all constraints in the sketch Выдаліць усе абмежаванні на эскізе @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Выдаліць усю геаметрыю - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Выдаліць усю геаметрыю і абмежаванні на бягучым эскізе, за выключэннем вонкавай геаметрыі @@ -1228,12 +1228,12 @@ as mirroring reference. CmdSketcherMove - + Move Рухаць - + Moves the geometry taking as reference the last selected point Рухаць геаметрыю, у якасці эталону ўжывае апошнюю абраную кропку @@ -1254,12 +1254,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Прастакутны масіў - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Стварае прастакутны шаблон, у якасці эталону ўжывае апошнюю абраную кропку @@ -1267,12 +1267,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Выдаліць выраўноўванне восяў - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Змяняе абмежаванні, каб выдаліць выраўноўванне восяў, спрабуючы захаваць адносіны абмежавання для выбару @@ -1295,12 +1295,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Паказаць/схаваць унутраную геаметрыю - + Show all internal geometry or hide unused internal geometry Паказвае ўсю ўнутраную геаметрыю, ці хавае не ўжытую ўнутраную геаметрыю @@ -1308,8 +1308,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Абраць абмежаванні, які канфліктуюць @@ -1317,12 +1317,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Абраць звязаныя абмежаванні - + Select the constraints associated with the selected geometrical elements Абраць абмежаванні, якія звязаныя з абранымі геаметрычнымі элементамі @@ -1330,12 +1330,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Абраць звязаную геаметрыю - + Select the geometrical elements associated with the selected constraints Абраць геаметрычныя элементы, якія звязаныя з абранымі абмежаваннямі @@ -1343,12 +1343,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Абраць неабмежаваны DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Абраць геаметрычныя элементы, у якіх сродак рашэння ўсё яшчэ выяўляе неабмежаваныя ступені свабоды. @@ -1356,12 +1356,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Абраць гарызантальную вось - + Select the local horizontal axis of the sketch Абраць лакальную гарызантальную вось эскізу @@ -1369,8 +1369,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Абраць скажоныя абмежаванні @@ -1378,12 +1378,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Абраць пачатак каардынат - + Select the local origin point of the sketch Абраць лакальную кропку пачатак каардынат эскізу @@ -1391,8 +1391,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Абраць часткова залішнія абмежаванні @@ -1400,8 +1400,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Абраць залішнія абмежаванні @@ -1409,12 +1409,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Абраць вертыкальную вось - + Select the local vertical axis of the sketch Абраць лакальную вертыкальную вось эскізу @@ -1461,12 +1461,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Сіметрыя - + Creates symmetric geometry with respect to the last selected line or point Стварае сіметрычную геаметрыю адносна апошняй абранай лініі ці кропкі @@ -1474,12 +1474,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Задзейнічаць/адключыць абмежаванні - + Activates or deactivates the selected constraints Задзейнічае ці адключае абраныя абмежаванні @@ -1500,12 +1500,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Пераключыць кіруючае/апорнае абмежаванне - + Set the toolbar, or the selected constraints, into driving or reference mode Пераключае панэль інструментаў ці пераўтварае абраныя абмежаванні @@ -1593,54 +1593,54 @@ invalid constraints, degenerated geometry, etc. Дадаць фіксаванае абмежаванне - + Add 'Block' constraint Дадаць абмежаванне 'Абмежаванне' - + Add block constraint Дадаць абмежаванае абмежаванне - - + + Add coincident constraint Дадаць абмежаванне супадзення - - + + Add distance from horizontal axis constraint Дадаць абмежаванне адлегласці ад гарызантальнай восі - - + + Add distance from vertical axis constraint Дадаць абмежаванне адлегласці ад вертыкальнай восі - - + + Add point to point distance constraint Дадаць абмежаванне кропкі да адлегласці кропкі - - + + Add point to line Distance constraint Дадаць абмежаванне кропкі да адлегласці лініі - - + + Add circle to circle distance constraint Дадаць абмежаванне акружнасці да адлегласці акружнасці - + Add circle to line distance constraint Дадаць абмежаванне акружнасці да адлегласці акружнасці @@ -1649,8 +1649,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Дадаць абмежаванне даўжыні @@ -1772,159 +1772,159 @@ invalid constraints, degenerated geometry, etc. Дадаць абмежаванне адлегласці Y - + Add point to circle Distance constraint Дадаць абмежаванне кропкі да адлегласці акружнасці - - + + Add point on object constraint Дадаць кропку на абмежаванне аб'екта - - + + Add point to point horizontal distance constraint Дадаць абмежаванне кропкі да адлегласці па гарызанталі - + Add fixed x-coordinate constraint Дадаць фіксаванае абмежаванне x-каардынаты - - + + Add point to point vertical distance constraint Дадаць абмежаванне кропкі да адлегласці па вертыкалі - + Add fixed y-coordinate constraint Дадаць фіксаванае абмежаванне y-каардынаты - - + + Add parallel constraint Дадаць абмежаванні паралельнасці - - - - - - - + + + + + + + Add perpendicular constraint Дадаць абмежаванні перпендыкуляру - + Add perpendicularity constraint Дадаць абмежаванні перпендыкулярнасці - + Swap coincident+tangency with ptp tangency Памяняць супадзенне+дотык з дотыкам кропка-кропка - + Swap PointOnObject+tangency with point to curve tangency Памяняць КропкаНаАб'еце+дотык з кропкай дотыку крывой - - - - - - - + + + + + + + Add tangent constraint Дадаць абмежаванне датычнай - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Дадаць абмежаванне датычнай да кропкі - - - - + + + + Add radius constraint Дадаць абмежаванне радыусу - - - - + + + + Add diameter constraint Дадаць абмежаванне дыяметру - - - - + + + + Add radiam constraint Дадаць абмежаванне радыусу/дыяметру - - - - + + + + Add angle constraint Дадаць абмежаванне кута - - + + Add equality constraint Дадаць абмежаванне роўнасці - - - - - + + + + + Add symmetric constraint Дадаць абмежаванне сіметрычнасці - + Add Snell's law constraint Дадаць абмежаванне па закону Снеліуса - + Toggle constraint to driving/reference Пераключае абмежаванне паміж кіруючым і апорным - + Activate/Deactivate constraint Задзейнічаць/Адключыць абмежаванне @@ -2095,47 +2095,47 @@ invalid constraints, degenerated geometry, etc. Аб'яднаць Крывыя - + Cut in Sketcher - Cut in Sketcher + Выразаць з варштату эскізу - + Paste in Sketcher - Paste in Sketcher + Уставіць у варштат эскізу - + Exposing Internal Geometry Раскрыццё Ўнутранай геаметрыі - + Create symmetric geometry Стварыць сіметрычную геаметрыю - + Copy/clone/move geometry Скапіраваць/дубліраваць/рухаць геаметрыю - + Create copy of geometry Стварыць копію геаметрыі - + Delete all geometry Выдаліць усю геаметрыю - + Delete All Constraints Выдаліць усе абмежаванні - + Remove Axes Alignment Выдаліць выраўноўванне восяў @@ -2153,8 +2153,8 @@ invalid constraints, degenerated geometry, etc. Абнавіць абмежаванне віртуальнай прасторы - + Add auto constraints Дадаць аўтаматычныя абмежаванні @@ -2169,22 +2169,22 @@ invalid constraints, degenerated geometry, etc. Пераназваць абмежаванні эскізу - + Drag Point Перацягнуць кропку - + Drag Curve Перацягнуць крывую - + Drag Constraint Перацягнуць абмежаванні - + Modify sketch constraints Змяніць абмежаванні эскізу @@ -2221,7 +2221,12 @@ invalid constraints, degenerated geometry, etc. Scale geometries - Scale geometries + Маштабаваць геаметрыю + + + + Translate geometries + Translate geometries @@ -2327,16 +2332,16 @@ invalid constraints, degenerated geometry, etc. Вузел не можа быць устаўлены за межы дыяпазону наладаў B-сплайна. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Індэкс налады ToolWidget знаходзіцца па-за дыяпазонам @@ -2402,20 +2407,8 @@ invalid constraints, degenerated geometry, etc. Не прымацаваць - - - - - - - - - - - - @@ -2426,133 +2419,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Няправільны выбар @@ -2627,8 +2631,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Залішняе абмежаванне @@ -2644,8 +2648,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Абранае рабро ўжо мае абмежаванне руху! @@ -2657,7 +2661,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Абраць вяршыню на эскізе. @@ -2682,29 +2686,29 @@ invalid constraints, degenerated geometry, etc. Абмежаванае абмежаванне не можа быць дададзена, калі эскіз не вырашаны альбо мае залішнія і абмежаванні, якія канфліктуюць. - + Select one edge from the sketch. Абраць адно рабро на эскізе. - + Select only edges from the sketch. Абраць толькі рэбры на эскізе. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + З дапамогай B-сплайну падтрымліваецца толькі датычная праз кропку. - + Number of selected objects is not 3 Колькасць абраных аб'ектаў не 3 + - Error Памылка @@ -2719,171 +2723,170 @@ invalid constraints, degenerated geometry, etc. Абраныя элементы не можа прымаць гарызантальнае ці вертыкальнае абмежаванне! - + Endpoint to endpoint tangency was applied instead. Замест канчатковай кропкі ўжыты дотык да канчатковай кропкі. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Абраць дзве ці болей вяршыні на эскізе для абмежавання супадзення альбо дзве ці болей акружнасцяў, эліпсаў, дуг або дуг эліпса для канцэнтрычнага абмежавання. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Абраць дзве вяршыні на эскізе для абмежавання супадзення альбо дзве акружнасці, эліпсаў, дуг або дуг эліпса для канцэнтрычнага абмежавання. - + Select exactly one line or one point and one line or two points from the sketch. Абраць на эскізе адну лінію, альбо адну кропку і адну лінію, альбо дзве кропкі. - + Cannot add a length constraint on an axis! Не атрымалася дадаць абмежаванне даўжыні на вось! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Абраць на эскізе адну лінію, альбо адну кропку і адну лінію, альбо дзве кропкі, альбо дзве акружнасці. - + This constraint does not make sense for non-linear curves. Абмежаванне не мае сэнсу для нелінейных крывых. - + Endpoint to edge tangency was applied instead. Замест канчатковай кропкі ўжыты дотык да рабра. - - - - - - + + + + + + Select the right things from the sketch. Абраць неабходныя аб'екты на эскізе. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Абраць рабро, якое не з'яўляецца вагой B-сплайна. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + Адно або два абмежаванні кропкі на аб'екце былі выдаленыя, паколькі апошняе абмежаванне, якое ўжываецца ўнутры, таксама прымяняецца кропкай на аб'екце. - + Select either several points, or several conics for concentricity. Абраць альбо некалькі кропак, альбо некалькі конусаў для канцэнтрычнасці. - + Select either one point and several curves, or one curve and several points Абраць альбо адну кропку і некалькі крывых, альбо адну крывую і некалькі кропак - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Абраць альбо адну кропку і некалькі крывых, альбо адну крывую і некалькі кропак для pointOnObject, альбо некалькі кропак для супадзення, альбо некалькі конусаў для канцэнтрычнасці. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Ні адна з абраных кропак не была абмежаваная адпаведнымі крывымі, таму што яны з'яўляюцца часткамі аднаго і таго ж элемента, таму што яны абодва з'яўляюцца вонкавай геаметрыяй альбо таму, што рабро не падыходзіць. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ні адна з абраных кропак не была абмежаваная адпаведнымі крывымі, альбо таму што яны з'яўляюцца часткамі аднаго і таго ж элемента, альбо таму што яны абодва з'яўляюцца вонкавай геаметрыяй. - + Cannot add a length constraint on this selection! Не атрымалася дадаць абмежаванне даўжыні для абранага! - - - - + + + + Select exactly one line or up to two points from the sketch. Абраць на эскізе адну лінію, альбо не болей дзвюх кропак. - + Cannot add a horizontal length constraint on an axis! Не атрымалася дадаць гарызантальнае абмежаванне даўжыні на вось! - + Cannot add a fixed x-coordinate constraint on the origin point! Не атрымалася дадаць фіксаванае абмежаванне каардынаты X да кропкі пачатку каардынат! - - + + This constraint only makes sense on a line segment or a pair of points. Абмежаванне мае сэнс толькі для адрэзка лініі ці пары кропак. - + Cannot add a vertical length constraint on an axis! Не атрымалася дадаць вертыкальнае абмежаванне даўжыні на вось! - + Cannot add a fixed y-coordinate constraint on the origin point! Не атрымалася дадаць фіксаванае абмежаванне каардынаты Y да кропкі пачатку каардынат! - + Select two or more lines from the sketch. Абраць дзве ці болей ліній на эскізе. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Абраць па крайняй меры дзве лініі на эскізе. - - Select a valid line. - Абраць дапушчальную лінію. - - - - + The selected edge is not a valid line. Абранае рабро не з'яўляецца дапушчальнай ліняй. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2893,35 +2896,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Дапушчальныя камбінацыі: дзве крывыя; канчатковая кропка і крывая; дзве канчатковыя кропкі; дзве крывыя і кропка. - + Select some geometry from the sketch. perpendicular constraint Абраць некаторую геаметрыю на эскізе. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не атрымалася дадаць абмежаванне перпендыкулярнасці ў нязлучанай кропцы! - - + + One of the selected edges should be a line. Адно з абраных рэбраў павінна быць лініяй. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Ужыты дотык канчатковай кропкі да канчатковай кропкі. Абмежаванне супадзення было выдалена. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Ужыты дотык канчатковай кропкі да рабра. Абмежаванне кропкі на аб'екце было выдалена. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2931,67 +2934,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Дапушчальныя камбінацыі: дзве крывыя; канчатковая кропка і крывая; дзве канчатковыя кропкі; дзве крывыя і кропка. - + Select some geometry from the sketch. tangent constraint Абраць некаторую геаметрыю на эскізе. - - - + + + Cannot add a tangency constraint at an unconnected point! Не атрымалася дадаць абмежаванне дотыку ў нязлучанай кропцы! - - + + Tangent constraint at B-spline knot is only supported with lines! Датычная абмежаванне ў вузле B-сплайна падтрымліваецца толькі лініямі! - + B-spline knot to endpoint tangency was applied instead. Замест вузла B-сплайну ўжыты дотык да канчатковай кропкі. - - + + Wrong number of selected objects! Няправільная колькасць абраных аб'ектаў! - - + + With 3 objects, there must be 2 curves and 1 point. З 3 аб'ектамі павінна быць 2 крывыя і 1 кропка. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Абраць адну ці болей дуг альбо акружнасцяў на эскізе. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Абраці альбо толькі адзін ці некалькі палюсоў B-сплайну, альбо толькі адну ці некалькі дуг або акружнасцяў на эскізе, але не змешаных. - - - + + + Constraint only applies to arcs or circles. Абмежаванне прымяняецца толькі на дугах ці акружнасцях. - - + + Select one or two lines from the sketch. Or select two edges and a point. Абраць адну ці дзве лініі, альбо дзве крывыя і кропку. @@ -3006,88 +3009,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Не атрымалася задаць абмежаванне вугла паміж паралельнымі лініямі. - + Cannot add an angle constraint on an axis! Не атрымалася дадаць абмежаванне вугла на вось! - + Select two edges from the sketch. Абраць два рабра на эскізе. - + Select two or more compatible edges. Абраць два ці больш сумяшчальных рабра. - + Sketch axes cannot be used in equality constraints. Восі эскізу нельга ўжываць у абмежаваннях роўнасці. - + Equality for B-spline edge currently unsupported. Абмежаванні роўнасці на рэбры B-сплайна ў бягучым часе не падтрымліваецца. - - - + + + Select two or more edges of similar type. Абярыце два ці больш рэбраў аналагічнага тыпу. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Абярыце на эскізе дзве кропкі і лінію сіметрыі, альбо дзве кропкі і кропку сіметрыі, альбо лінію і кропку сіметрыі. - - + + Cannot add a symmetry constraint between a line and its end points. Не атрымалася дадаць абмежаванне сіметрыі паміж лініяй і яе канчатковымі кропкамі. - - + + Cannot add a symmetry constraint between a line and its end points! Не атрымалася дадаць абмежаванне сіметрыі паміж лініяй і яе канчатковымі кропкамі! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Абраць дзве канчатковыя кропкі ліній, якія будуць дзейнічаць як прамяні, і рабро, якое прадстаўляе мяжу. Першая абраная кропка адпавядае індэксу n1, другая - n2, а апорнае значэнне вызначаецца суадносінамі n2/n1. - + Selected objects are not just geometry from one sketch. Абраныя аб'екты не з'яўляюцца проста геаметрыяй з аднаго эскіза. - + Cannot create constraint with external geometry only. Не атрымалася стварыць абмежаванне з ужываннем толькі вонкавай геаметрыі. - + Incompatible geometry is selected. Абрана несумяшчальная геаметрыя. + - - - - + + + Select constraints from the sketch. Абраць абмежаванне на эскізе. @@ -3109,9 +3112,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Вызначыць ступень B-сплайну, паміж 1 і %1: - + CAD Kernel Error Памылка ядра CAD @@ -3187,69 +3190,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Варта выбраць дзве канчатковыя кропкі альбо супадальную кропку. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Абраць элементы з аднаго эскізу. - + No constraint selected Не абрана абмежаванняў - + At least one constraint must be selected Павінна быць абрана, па меншай меры, адно абмежаванне - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Будаўнічая сіметрыя патрабуе, па меншай меры, дзвюх геаметрычных элементаў, прычым апошні геаметрычны элемент з'яўляецца эталонам для будаўнічай сіметрыі. - + The last element must be a point or a line serving as reference for the symmetry construction. Апошнім элементам павінны быць кропка ці лінія, які служыць арыенцірам для будаўнічай сіметрыі. - - + + A copy requires at least one selected non-external geometric element Для капіравання патрабуецца, па меншай меры, адзін абраны не вонкавы геаметрычны элемент - + Delete All Geometry Выдаліць усю Геаметрыю - + Are you really sure you want to delete all geometry and constraints? Вы ўпэўненыя, што жадаеце выдаліць усю геаметрыю і абмежаванні? - + Delete All Constraints Выдаліць усе абмежаванні - + Are you really sure you want to delete all the constraints? Вы ўпэўненыя, што жадаеце выдаліць усе абмежаванні? - + Removal of axes alignment requires at least one selected non-external geometric element Для выдалення выраўноўвання восяў патрабуецца, па меншай меры, адзін абраны не вонкавы геаметрычны элемент @@ -3330,7 +3333,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters - Scale parameters + Налады маштабавання + + + + Translate parameters + Translate parameters @@ -3642,12 +3650,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Даўжыня: - + Refractive index ratio Суадносіны каэфіцыента праламлення - + Ratio n2/n1: Суадносіны n2/n1: @@ -4061,13 +4069,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Стварыць масіў + Create regular polygon + Стварыць правільны шматкутнік - Number of Sides: - Колькасць бакоў: + Number of sides: + Number of sides: @@ -4086,7 +4094,7 @@ reflected on copies Task panel widgets - Task panel widgets + Фішкі панэлі задач @@ -4171,7 +4179,7 @@ Requires to re-enter edit mode to take effect. Dimension constraint - Dimension constraint + Абмежаванне вымярэння @@ -4180,11 +4188,11 @@ Requires to re-enter edit mode to take effect. 'Separated tools': Individual tools for each dimensioning constraint. 'Both': You will have both the 'Dimension' tool and the separated tools. This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Абярыце тып абмежаванняў вымярэнняў для вашай панэлі інструментаў: +'Адзінкавы інструмент': адзіны інструмент для ўсіх абмежаванняў вымярэнняў на панэлі инструментаў: Адлегласць, Адлегласць X / Y, Вугал, Радыус. (Іншыя ў выпадальным спісе) +'Асобныя інструменты': асобныя інструменты для кожнага абмежавання вымярэнняў. +'Абодва': у вас будзе як інструмент 'Вымярэнне', так і асобныя інструменты. +Гэтая налада прызначаная толькі для панэлі інструментаў. Што б вы ні абралі, усе інструменты заўсёды даступныя ў меню і з дапамогай спалучэнняў. @@ -4192,10 +4200,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Калі ўжываецца інструмент вымярэння, вы можаце выбраць спосаб апрацоўкі акружнасцяў і дуг: +'Аўтаматычнае': інструмент прыменіць радыус да дугі і дыяметр да акружнасці. +'Дыяметр': інструмент прыменіць дыяметр як да дугі, так і да акружнасці. +'Радыус': інструмент прыменіць радыус як да дугі, так і да акружнасці. @@ -4205,7 +4213,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + Налады, якія адлюстроўваюцца ў выглядзе: @@ -5072,112 +5080,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Змяніць эскіз - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Хібны эскіз - + Do you want to open the sketch validation tool? Адчыніць інструмент праверкі эскіза? - + The sketch is invalid and cannot be edited. Эскіз хібны і не можа быць зменены. - + Please remove the following constraint: Калі ласка, выдаліце наступнае абмежаванне: - + Please remove at least one of the following constraints: Калі ласка, выдаліце, прынамсі, адное з наступных абмежаванняў: - + Please remove the following redundant constraint: Калі ласка, выдаліце наступнае залішняе абмежаванне: - + Please remove the following redundant constraints: Калі ласка, выдаліце наступныя залішнія абмежаванні: - + The following constraint is partially redundant: Наступнае абмежаванне часткова залішняе: - + The following constraints are partially redundant: Наступныя абмежаванні часткова залішнія: - + Please remove the following malformed constraint: Калі ласка, выдаліце наступнае скажонае абмежаванне: - + Please remove the following malformed constraints: Калі ласка, выдаліце наступныя скажоныя абмежаванні: - + Empty sketch Пусты эскіз - + Over-constrained: Празмерна-абмежаваны: - + Malformed constraints: Скажоныя абмежаванні: - + Redundant constraints: Залішнія абмежаванні: - + Partially redundant: Часткова залішнія: - + Solver failed to converge Сродку рашэння не атрымалася сысціся - + Under constrained: Ва ўмовах абмежавання: - + %n DoF(s) %n ступені свабоды @@ -5187,7 +5195,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Цалкам абмежаваны @@ -5258,8 +5266,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Стварае клон геаметрыі, у якасці эталону ўжывае апошнюю абраную кропку @@ -5267,17 +5275,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Дублікат - + Copy Скапіраваць - + Move Рухаць @@ -5285,8 +5293,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Задаць дыяметр акружнасці ці дугі @@ -5294,8 +5302,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Задаць радыус/дыяметр акружнасці ці дугі @@ -5303,8 +5311,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Задаць радыус акружнасці ці дугі @@ -5312,8 +5320,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Стварае просты клон геаметрыі, у якасці эталону бярэ апошнюю абраную кропку @@ -5599,8 +5607,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Рухаць геаметрыю, у якасці эталону ўжывае апошнюю абраную кропку @@ -5925,7 +5933,7 @@ Eigen Sparse QR - аптымізаваны для разрэджаных мат ViewProviderSketch - + and %1 more і яшчэ %1 @@ -6155,64 +6163,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Памылка - + Failed to delete all geometry Не атрымалася выдаліць усю геаметрыю - + Failed to delete all constraints Не атрымалася выдаліць усе абмежаванні - - + + Invalid selection Хібны выбар - + Selection has no valid geometries. Выбар не мае дапушчальнай геаметрыі. - + Selection has no valid geometries. BSplines, Points are not supported yet. Выбар не мае дапушчальнай геаметрыі. В-сплайны, кропкі пакуль не падтрымліваюцца. @@ -6222,18 +6231,18 @@ The grid spacing change if it becomes smaller than this number of pixel.Абмежаванне змяшчае недапушчальную інфармацыю аб індэксе і з'яўляецца скажоным. - - - - - - - + + + + + + + Invalid Constraint Хібнае абмежаванне @@ -6273,8 +6282,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Памылка стварэння полюса B-сплайну - + Error creating B-spline Памылка стварэння B-сплайну @@ -6330,16 +6339,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Немагчыма дадаць лінію - - - - - - - - + + + + + + + + + Tool execution aborted Выкананне інструмента перапынена @@ -6374,9 +6384,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Немагчыма абрэзаць рабро + - Value Error Памылка значэння @@ -6433,7 +6443,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Failed to scale - Failed to scale + Не атрымалася маштабаваць + + + + Failed to translate + Failed to translate @@ -6638,12 +6653,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Абмежаванне радыуса - + Fix the radius of a circle or an arc Задаць радыус акружнасці ці дугі @@ -6760,12 +6775,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Геаметрыя зрушэння - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Зрушэнне абранай геаметрыі. Пры станоўчай даўжыні зрушэнне ідзе вонкі, пры адмоўнай даўжыні - унутр. @@ -6786,7 +6801,9 @@ Left clicking on empty space will validate the current constraint. Right clickin This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + Гэтае тычыцца абмежаванняў дадзеных (напрыклад, адлегласці). +Калі вы актывуеце Дублікат, інструмент скапіруе дадзеныя. +У адваротным выпадку ён паспрабуе замяніць іх роўнасць. @@ -6899,12 +6916,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Абмежаванне накладання кропак - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Стварыць абмежаванне супадзення паміж кропкамі, альбо зафіксаваць кропку на рабры, альбо канцэнтрычнае абмежаванне паміж акружнасцямі, дугамі і эліпсамі @@ -6912,12 +6929,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Палярнае пераўтварэнне - + Rotate selected geometries, making n copies, enable creation of circular patterns. Павярнуць абраныя геаметрычныя фігуры, стварыць n копій, дазволіць ствараць кругавыя шаблоны. @@ -7026,12 +7043,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of normal edges. - Line pattern of normal edges. + Лінейны ўзор нармалі рэбраў. Width of normal edges. - Width of normal edges. + Шырыня нармалі рэбраў. @@ -7051,12 +7068,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of construction edges. - Line pattern of construction edges. + Лінейны ўзор рэбраў канструкцыі. Width of construction edges. - Width of construction edges. + Шырыня рэбраў канструкцыі. @@ -7076,12 +7093,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + Лінейны ўзор унутраных выраўнаваных рэбраў. Width of internal aligned edges. - Width of internal aligned edges. + Шырыня ўнутраных выраўнаваных рэбраў. @@ -7096,12 +7113,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of external edges. - Line pattern of external edges. + Лінейны ўзор вонкавых рэбраў. Width of external edges. - Width of external edges. + Шырыня вонкавых рэбраў. @@ -7199,7 +7216,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Копіі (+'U'/-'J') @@ -7207,7 +7224,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Бакі (+'U'/-'J') @@ -7215,7 +7232,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Keep original geometries (U) - Keep original geometries (U) + Пакінуць зыходныя геаметрыі (U) @@ -7223,64 +7240,107 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrain - Constrain + Абмежаванне Constrain tools. - Constrain tools. + Інструменты абмежавання. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + &Капіраваць з варштату эскізу - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Капіраваць абраныя геаметрыі і абмежаванні ў буфер абмену CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + Вы&разаць з варштату эскізу - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Выразаць абраныя геаметрыі і абмежаванні ў буфер абмену CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + &Уставіць у варштат эскізу - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Уставіць абраныя геаметрыі і абмежаванні з буфера абмену CmdSketcherScale - + Scale transform - Scale transform + Пераўтварэнне маштабу - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Маштабуецца абраныя геаметрыі. +Пасля выбару цэнтральнай кропкі вы можаце альбо ўвесці маштабны каэфіцыент, альбо абраць дзве апорныя кропкі, потым маштабны каэфіцыент = даўжыня (p2-цэнтр) / даўжыня (p1-цэнтр). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Абмежаванні дублікату + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index dafd066aec..8e944e797d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringeix l'arc o la circumferència - + Constrain an arc or a circle Restringeix un arc o una circumferència - + Constrain radius Restringeix el radi - + Constrain diameter Restringeix el diàmetre - + Constrain auto radius/diameter Limiteu el radi/diàmetre automàtic @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Restricció de angle - + Fix the angle of a line or the angle between two lines Fixa l'angle d'una línia o l'angle entre dues línies @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restricció coincident - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Crea una restricció coincident entre punts o una restricció concèntrica entre cercles, arcs i el·lipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringeix el diàmetre - + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restricció de distància - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixa la distància horitzontal entre dos punts o extrems de línia @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Restringir la distància vertical - + Fix the vertical distance between two points or line ends Fixa la distància vertical entre dos punts o extrems de línia @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restricció igual - + Create an equality constraint between two lines or between circles and arcs Crea una restricció d'igualtat entre dues línies o entre cercles i arcs @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Restricció de parel·lelisme - + Create a parallel constraint between two lines Crea una restricció de paral·lelisme entre dues línies @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restricció de perpendicularitat - + Create a perpendicular constraint between two lines Crea una restricció de perpendicularitat entre dues línies @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Restricció d'un punt sobre l'objecte - + Fix a point onto an object Fixa un punt sobre un objecte @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Limiteu el radi/diàmetre automàtic - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restricció de simetria - + Create a symmetry constraint between two points with respect to a line or a third point Crea una restricció de simetria entre dos punts respecte a una línia o a un tercer punt @@ -601,12 +601,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Restricció tangent - + Create a tangent constraint between two entities Crea una restricció tangent entre dues entitats @@ -640,12 +640,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Copia - + Creates a simple copy of the geometry taking as reference the last selected point Crea una còpia simple de la geometria prenent com a referència l'últim punt seleccionat @@ -1030,12 +1030,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Esborra totes les restriccions - + Delete all constraints in the sketch Esborra totes les restriccions en el croquis @@ -1043,12 +1043,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Esborra tota la geometria - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Esborra tota la geometria i restriccions en el croquis actual, excepte la geometria externa @@ -1231,12 +1231,12 @@ com a referencia per reflectir. CmdSketcherMove - + Move Mou - + Moves the geometry taking as reference the last selected point Mou la geometria prenent com a referència l'últim punt seleccionat @@ -1257,12 +1257,12 @@ com a referencia per reflectir. CmdSketcherRectangularArray - + Rectangular array Matriu rectangular - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Crea un patró de matriu rectangular de la geometria prenent com a referència l'últim punt seleccionat @@ -1270,12 +1270,12 @@ com a referencia per reflectir. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Elimina l'alineació dels eixos - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica les restriccions per eliminar l'alineació dels eixos mentre s'intenta preservar la relació de restriccions de la selecció @@ -1298,12 +1298,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostra o amaga la geometria interna - + Show all internal geometry or hide unused internal geometry Mostra tota la geometria interna, o amaga la geometria interna que no s'utilitza @@ -1311,8 +1311,8 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Selecciona les restriccions en confilcte @@ -1320,12 +1320,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectConstraints - + Select associated constraints Selecciona les restriccions associades - + Select the constraints associated with the selected geometrical elements Selecciona les restriccions associades amb els elements geomètrics seleccionats @@ -1333,12 +1333,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Selecciona la geometria associada - + Select the geometrical elements associated with the selected constraints Selecciona els elements geomètrics associats a les restriccions seleccionades @@ -1346,12 +1346,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Selecciona graus de llibertat sense restriccions - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Selecciona elements geomètrics on el sistema de resolució encara detecta graus de llibertat sense restricció. @@ -1359,12 +1359,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Selecciona l'eix horitzontal - + Select the local horizontal axis of the sketch Selecciona l'eix horitzontal local del croquis @@ -1372,8 +1372,8 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Selecciona restriccions defectuoses @@ -1381,12 +1381,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectOrigin - + Select origin Seleccionar origen - + Select the local origin point of the sketch Selecciona el punt d'origen local del croquis @@ -1394,8 +1394,8 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Selecciona restriccions parcialment redundants @@ -1403,8 +1403,8 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Selecciona restriccions redundants @@ -1412,12 +1412,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSelectVerticalAxis - + Select vertical axis Selecciona l'eix vertical - + Select the local vertical axis of the sketch Selecciona l'eix vertical local del croquis @@ -1464,12 +1464,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherSymmetry - + Symmetry Simetria - + Creates symmetric geometry with respect to the last selected line or point Crea una geometria simètrica respecte a l'última línia o punt seleccionats @@ -1477,12 +1477,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activa/desactiva la restricció - + Activates or deactivates the selected constraints Activa o desactiva les restriccions seleccionades @@ -1503,12 +1503,12 @@ Això esborrarà la propietat 'Suport', si existeix. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Canvia la restricció de guia a referència - + Set the toolbar, or the selected constraints, into driving or reference mode Estableix la barra d'eines o les restriccions seleccionades, en mode guia o referència @@ -1596,54 +1596,54 @@ restriccions invàlides, geometries degenerades, etc. Afegir restricció fixa - + Add 'Block' constraint Afegir restricció 'Bloqueig' - + Add block constraint Afegir restricció de Bloqueig - - + + Add coincident constraint Afegir restricció de coincidència - - + + Add distance from horizontal axis constraint Afegir distancia des-de la restricció del eix horitzontal - - + + Add distance from vertical axis constraint Afegir distancia des-de la restricció del eix vertical - - + + Add point to point distance constraint Afegeix una restricció de distància entre dos punts - - + + Add point to line Distance constraint Afegeix una restricció de distància de punt a línia - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1652,8 +1652,8 @@ restriccions invàlides, geometries degenerades, etc. - - + + Add length constraint Afegeix una restricció de longitud @@ -1775,159 +1775,159 @@ restriccions invàlides, geometries degenerades, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Afegeix una restricció de punt sobre l'objecte - - + + Add point to point horizontal distance constraint Afegeix una restricció punt a punt de distància horitzontal - + Add fixed x-coordinate constraint Afegeix restricció de coordenada x fixa - - + + Add point to point vertical distance constraint Afegeix una restricció de distància vertical punt a punt - + Add fixed y-coordinate constraint Afegeix una restricció de coordenada x fixe - - + + Add parallel constraint Afegeix una restricció paral·lela - - - - - - - + + + + + + + Add perpendicular constraint Afegeix una restricció perpendicular - + Add perpendicularity constraint Afegeix una restricció de perpendicularitat - + Swap coincident+tangency with ptp tangency Canvia tangència+coincident amb tangència punt a punt - + Swap PointOnObject+tangency with point to curve tangency Canvia PointOnObject+tangència amb tangència punt a corba - - - - - - - + + + + + + + Add tangent constraint Afegeix una restricció tangent - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Afegeix un punt de restricció de tangent - - - - + + + + Add radius constraint Afegeix una restricció de radi - - - - + + + + Add diameter constraint Afegeix una restricció de diàmetre - - - - + + + + Add radiam constraint Afegeix una restricció de radi - - - - + + + + Add angle constraint Afegeix una restricció d'angle - - + + Add equality constraint Afegeix una restricció d'igualtat - - - - - + + + + + Add symmetric constraint Afegeix una restricció de simetria - + Add Snell's law constraint Afegeix una restricció de Llei de Snell - + Toggle constraint to driving/reference Canvia restricció entre guia i referència - + Activate/Deactivate constraint Activa o desactiva la restricció @@ -2098,47 +2098,47 @@ restriccions invàlides, geometries degenerades, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposa la geometria interna - + Create symmetric geometry Crea geometria simètrica - + Copy/clone/move geometry Copia, clona o mou la geometria - + Create copy of geometry Crea una còpia de la geometria - + Delete all geometry Esborra tota la geometria - + Delete All Constraints Suprimeix totes les restriccions - + Remove Axes Alignment Elimina l'alineació d'eixos @@ -2156,8 +2156,8 @@ restriccions invàlides, geometries degenerades, etc. Actualitza l'espai virtual de la restricció - + Add auto constraints Afegeix restriccions automàtiques @@ -2172,22 +2172,22 @@ restriccions invàlides, geometries degenerades, etc. Reanomena restricció del croquis - + Drag Point Arrossega el punt - + Drag Curve Arrossega la corba - + Drag Constraint Arrossega la restricció - + Modify sketch constraints Modifica les restriccions del croquis @@ -2226,6 +2226,11 @@ restriccions invàlides, geometries degenerades, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2330,16 +2335,16 @@ restriccions invàlides, geometries degenerades, etc. El node no es pot inserir fora de l'interval de paràmetres BSpline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2405,20 +2410,8 @@ restriccions invàlides, geometries degenerades, etc. No adjuntar - - - - - - - - - - - - @@ -2429,133 +2422,144 @@ restriccions invàlides, geometries degenerades, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selecció incorrecta @@ -2630,8 +2634,8 @@ restriccions invàlides, geometries degenerades, etc. - - + + Double constraint Restricció doble @@ -2647,8 +2651,8 @@ restriccions invàlides, geometries degenerades, etc. - - + + The selected edge already has a Block constraint! La vora seleccionat ja té una restricció de bloc! @@ -2660,7 +2664,7 @@ restriccions invàlides, geometries degenerades, etc. - + Select vertices from the sketch. Seleccioneu vèrtexs del croquis. @@ -2685,29 +2689,29 @@ restriccions invàlides, geometries degenerades, etc. No es pot afegir una restricció de bloqueig si el croquis no està resolt o hi ha restriccions redundants i en conflicte. - + Select one edge from the sketch. Seleccioneu una aresta del corquis. - + Select only edges from the sketch. Seleccioneu sols arestes del croquis. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Error @@ -2722,75 +2726,75 @@ restriccions invàlides, geometries degenerades, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. En el seu lloc s'ha aplicat una tangència entre extrems. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Seleccioneu exactament una línia, o un punt i una línia, o dos punts del croquis. - + Cannot add a length constraint on an axis! No es pot afegir una restricció de longitud sobre un eix! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. Aquesta restricció no té sentit per a corbes no lineals. - + Endpoint to edge tangency was applied instead. En el seu lloc, s'ha aplicat la tangència de punt final a vora. - - - - - - + + + + + + Select the right things from the sketch. Seleccioneu els elements correctes del croquis. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Seleccioneu una vora que no sigui un pes B-spline. @@ -2800,93 +2804,92 @@ restriccions invàlides, geometries degenerades, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Cap dels punts seleccionats estava restringit sobre les respectives corbes, perquè són parts del mateix element, perque ambdós són geometries externes, o perquè l'aresta no és eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Cap dels punts seleccionats estaven limitats a les respectives corbes, perquè són peces del mateix element o perquè són tant geometria externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccioneu exactament una línia o fins a dos punts del croquis. - + Cannot add a horizontal length constraint on an axis! No es pot afegir una restricció de longitud horitzontal sobre un eix! - + Cannot add a fixed x-coordinate constraint on the origin point! No es pot afegir una limitació coordenada x fixa en el punt d'origen! - - + + This constraint only makes sense on a line segment or a pair of points. Aquesta restricció només té sentit en un segment de línia o un parell de punts. - + Cannot add a vertical length constraint on an axis! No es pot afegir una restricció de longitud vertical sobre un eix! - + Cannot add a fixed y-coordinate constraint on the origin point! No es pot afegir una limitació coordenada x fixa en el punt d'origen! - + Select two or more lines from the sketch. Seleccioneu dues o més línies del croquis. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Seleccioneu almenys dues línies del croquis. - - Select a valid line. - Seleccioneu una línia vàlida. - - - - + The selected edge is not a valid line. L'aresta seleccionada no és una línia vàlida. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2894,35 +2897,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. perpendicular constraint Seleccioneu alguna geometria del croquis. - - + + Cannot add a perpendicularity constraint at an unconnected point! No es pot afegir una restricció de perpendicularitat en un punt no connectat! - - + + One of the selected edges should be a line. Una de les arestes seleccionades ha de ser una línia. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. S'ha aplicat una tangència entre extrems. S'han suprimit les restriccions coincidents. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. S'ha aplicat la tangència de punt final a vora. S'ha suprimit el punt sobre la restricció d'objectes. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2930,67 +2933,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. tangent constraint Seleccioneu alguna geometria del croquis. - - - + + + Cannot add a tangency constraint at an unconnected point! No es pot afegir una restricció de tangència en un punt no connectat! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! El nombre d'objectes seleccionats és incorrecte! - - + + With 3 objects, there must be 2 curves and 1 point. Amb 3 objectes, hi ha d'haver 2 corbes i 1 punt. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Seleccioneu un o més arcs o cercles del croquis. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Seleccioneu o bé un o diversos pols de B-spline, o bé un o més arcs o circumferències del croquis, però no els mescleu. - - - + + + Constraint only applies to arcs or circles. La restricció només s'aplica a arcs i cercles. - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccioneu una o dues línies del croquis. O seleccioneu dues arestes i un punt. @@ -3005,88 +3008,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Una restricció d'angle no es pot definir per dues línies paral·leles. - + Cannot add an angle constraint on an axis! No es pot afegir una restricció d'angle sobre un eix! - + Select two edges from the sketch. Seleccioneu dues arestes del croquis. - + Select two or more compatible edges. Seleccioneu dues o més arestes compatibles. - + Sketch axes cannot be used in equality constraints. Els eixos d'esbós no es poden utilitzar en restriccions d'igualtat. - + Equality for B-spline edge currently unsupported. Actualment no s'admet la igualtat per a la vora del B-spline. - - - + + + Select two or more edges of similar type. Seleccioneu dues o més arestes de tipus similar. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccioneu dos punts i una línia de simetria, dos punts i un punt de simetria, o bé una línia i un punt de simetria del croquis. - - + + Cannot add a symmetry constraint between a line and its end points. No es pot afegir una restricció de simetria entre una línia i els seus extrems. - - + + Cannot add a symmetry constraint between a line and its end points! No es pot afegir una restricció de simetria entre una línia i els seus extrems! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccioneu dos extrems de línia per actuar com a raigs, i una aresta que representi un límit. El primer punt seleccionat correspon a l'índex n1, el segon a n2, i el valor de la restricció estableix una ràtio n2/n1. - + Selected objects are not just geometry from one sketch. Els objectes seleccionats no són només geometria d'un corquis. - + Cannot create constraint with external geometry only. No es pot crear una restricció només amb geometria externa. - + Incompatible geometry is selected. S'ha seleccionat geometria incompatible. + - - - - + + + Select constraints from the sketch. Seleccioneu restriccions del croquis. @@ -3108,9 +3111,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Definiu el grau B-Spline, entre 1 i %1: - + CAD Kernel Error Error del nucli del CAD @@ -3186,69 +3189,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Seleccioneu elements d'un únic croquis. - + No constraint selected No s'ha seleccionat cap restricció - + At least one constraint must be selected S'ha de seleccionar com a mínim una restricció - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Una construcció simètrica necessita com a mínim dos elements geomètrics, l'últim element geomètric és la referència per a la construcció de la simetria. - + The last element must be a point or a line serving as reference for the symmetry construction. L'últim element ha de ser un punt o una línia que servisca com a referència per a la construcció de la simetria. - - + + A copy requires at least one selected non-external geometric element Una còpia necessita com a mínim que se seleccione un element geomètric no extern - + Delete All Geometry Suprimeix totes les figures geomètriques - + Are you really sure you want to delete all geometry and constraints? Esteu realment segur que voleu esborrar tota la geometria i restriccions? - + Delete All Constraints Suprimeix totes les restriccions - + Are you really sure you want to delete all the constraints? Estàs realment segur que voleu suprimir totes les Restriccions? - + Removal of axes alignment requires at least one selected non-external geometric element L'eliminació de l'alineació dels eixos requereix almenys un element geomètric no extern seleccionat @@ -3329,6 +3332,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3639,12 +3647,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Longitud: - + Refractive index ratio Índex de refracció - + Ratio n2/n1: Relació n2/n1: @@ -4057,13 +4065,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Crea una matriu + Create regular polygon + Crear polígon regular - Number of Sides: - Nombre de costats: + Number of sides: + Number of sides: @@ -5059,114 +5067,114 @@ Això es fa mitjançant l'anàlisi de les geometries i restriccions de l'esbós. SketcherGui::ViewProviderSketch - + Edit sketch Editar croquis - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch El croquis no és vàlid - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. El croquis no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + The following constraint is partially redundant: La restricció següent és parcialment redundant: - + The following constraints are partially redundant: Les següents restriccions són parcialment redundants: - + Please remove the following malformed constraint: Si us plau, elimineu la restricció defectuosa següent: - + Please remove the following malformed constraints: Si us plau, elimineu les restriccions defectuoses següents: - + Empty sketch Croquis buit - + Over-constrained: Sobre-restringit: - + Malformed constraints: Selecciona restriccions defectuoses: - + Redundant constraints: Restriccions redundants: - + Partially redundant: Parcialment redundant: - + Solver failed to converge El solucionador no ha pogut convergir - + Under constrained: Sub-restringit: - + %n DoF(s) %n Grau(s) de llibertat @@ -5174,7 +5182,7 @@ El solucionador no ha pogut convergir - + Fully constrained Esbós completament restringit @@ -5245,8 +5253,8 @@ El solucionador no ha pogut convergir Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat @@ -5254,17 +5262,17 @@ El solucionador no ha pogut convergir Sketcher_CompCopy - + Clone Clona - + Copy Copia - + Move Mou @@ -5272,8 +5280,8 @@ El solucionador no ha pogut convergir Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -5281,8 +5289,8 @@ El solucionador no ha pogut convergir Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fixeu el radi/diàmetre d'un cercle o d'un arc @@ -5290,8 +5298,8 @@ El solucionador no ha pogut convergir Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -5299,8 +5307,8 @@ El solucionador no ha pogut convergir Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Crea una còpia simple de la geometria prenent com a referència l'últim punt seleccionat @@ -5586,8 +5594,8 @@ Trieu un mètode per unir aquest croquis als objectes seleccionats. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mou la geometria prenent com a referència l'últim punt seleccionat @@ -5911,7 +5919,7 @@ L'algoritme Eigen Sparse QR està optimitzat per a matrius escasses; generalment ViewProviderSketch - + and %1 more i % 1 més @@ -6141,64 +6149,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Error - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Selecció no vàlid - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6208,18 +6217,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6259,8 +6268,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6316,16 +6325,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6360,9 +6370,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6416,6 +6426,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6615,12 +6630,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Restringeix el radi - + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -6737,12 +6752,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6875,12 +6890,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restricció coincident - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6888,12 +6903,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7209,12 +7224,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7222,12 +7237,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7235,12 +7250,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7248,14 +7263,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index 4309ef9583..eacadc89bd 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Vytvoří klon geometrie, s naposledy vybraným bodem jako referenčním @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Vazba oblouku nebo kružnice - + Constrain an arc or a circle Vazba oblouku nebo kružnice - + Constrain radius Vazba poloměru - + Constrain diameter Vazba průměru - + Constrain auto radius/diameter Vazba automaticky poloměr/průměr @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Vytvoří klon geometrie, s naposledy vybraným bodem jako referenčním @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Vazba úhlu - + Fix the angle of a line or the angle between two lines Zadá úhel čáry nebo úhel mezi dvěma čarami @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Vazba totožnosti - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Vytvoří souosou vazbu mezi body nebo soustřednou vazbu mezi kružnicemi, oblouky a elipsami @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Vazba průměru - + Fix the diameter of a circle or an arc Zadá průměr kružnice nebo oblouku @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Vazba vzdálenosti - + Fix a length of a line or the distance between a line and a vertex or between two circles Zadá délku čáry nebo vzdálenost mezi čárou a vrcholem nebo mezi dvěma kružnicemi @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Vazba vodorovné vzdálenosti - + Fix the horizontal distance between two points or line ends Zadá vodorovnou vzdálenost mezi dvěma body nebo konci čáry @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Vazba svislé vzdálenosti - + Fix the vertical distance between two points or line ends Zadá svislou vzdálenost mezi dvěma body nebo konci čáry @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Vazba shodnosti - + Create an equality constraint between two lines or between circles and arcs Vytvoří shodnost mezi dvěma čarami, kruhy nebo oblouky @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Vazba rovnoběžnosti - + Create a parallel constraint between two lines Vytvoří rovnoběžnost mezi dvěma čarami @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Vazba kolmosti - + Create a perpendicular constraint between two lines Vytvoří kolmost mezi dvěma čarami @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Vazba bodu k objektu - + Fix a point onto an object Umístí bod na objekt @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Vazba automaticky poloměr/průměr - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Zadá průměr, pokud je vybrána kružnice nebo poloměr, pokud je vybrán oblouk/pól splajnu @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Vazba lomu (Snellův zákon) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Vytvoří vazbu podle zákona lomu (Snellův zákon) mezi @@ -586,12 +586,12 @@ dvěma koncovými body paprsků a hranou jako rozhraní. CmdSketcherConstrainSymmetric - + Constrain symmetrical Vazba symetrie - + Create a symmetry constraint between two points with respect to a line or a third point Vytvoří symetrii mezi dvěma body vzhledem k čáře nebo třetímu bodu @@ -600,12 +600,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Vazba tečnosti - + Create a tangent constraint between two entities Vytvoří tečnost mezi dvěma objekty @@ -639,12 +639,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Kopírovat - + Creates a simple copy of the geometry taking as reference the last selected point Vytvoří jednoduchou kopii geometrie s naposledy vybraným bodem jako referenčním @@ -1029,12 +1029,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Smazat všechny vazby - + Delete all constraints in the sketch Odstranit všechny vazby v náčrtu @@ -1042,12 +1042,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Smazat veškerou geometrii - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Odstranit veškerou geometrii a vazby v aktuálním náčrtu s výjimkou vnější geometrie @@ -1231,12 +1231,12 @@ jakožto reference. CmdSketcherMove - + Move Přesun - + Moves the geometry taking as reference the last selected point Posune geometrii, s naposledy vybraným bodem jako referenčním @@ -1257,12 +1257,12 @@ jakožto reference. CmdSketcherRectangularArray - + Rectangular array Obdélníkové pole - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Vytvoří obdélníkové pole se vzorem geometrie a referenčním bodem, který byl naposledy vybrán @@ -1270,12 +1270,12 @@ jakožto reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Odstranit osové zarovnání - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Upraví vazby tak, aby se odstranilo zarovnání podle osy, zatímco vazby ve výběru zůstaly zachované @@ -1298,12 +1298,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Zobrazit / skrýt vnitřní geometrii - + Show all internal geometry or hide unused internal geometry Zobrazit veškerou vnitřní geometrii nebo skrýt nepoužitou vnitřní geometrii @@ -1311,8 +1311,8 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Vybrat konfliktní vazby @@ -1320,12 +1320,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectConstraints - + Select associated constraints Vybrat související vazby - + Select the constraints associated with the selected geometrical elements Vybere vazby související s vybranými prvky geometrie @@ -1333,12 +1333,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Vybrat související geometrii - + Select the geometrical elements associated with the selected constraints Vybrat geometrické prvky spojené s vybranými vazbami @@ -1346,12 +1346,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Vybrat neomezené stupně volnosti - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Vybrat prvky geometrie, kde řešič stále detekuje neomezené stupně volnosti. @@ -1359,12 +1359,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Vybrat vodorovnou osu - + Select the local horizontal axis of the sketch Vybere lokální vodorovnou osu náčrtu @@ -1372,8 +1372,8 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Vyberte chybné vazby @@ -1381,12 +1381,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectOrigin - + Select origin Vybrat počátek - + Select the local origin point of the sketch Vybrat lokální počátek náčrtu @@ -1394,8 +1394,8 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Vybrat částečně nadbytečné vazby @@ -1403,8 +1403,8 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Vybere nadbytečné vazby @@ -1412,12 +1412,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSelectVerticalAxis - + Select vertical axis Vybrat vertikální osu - + Select the local vertical axis of the sketch Vybrat lokální svislou osu náčrtu @@ -1464,12 +1464,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherSymmetry - + Symmetry Symetrie - + Creates symmetric geometry with respect to the last selected line or point Vytvoří symterickou geometrii s ohledem na poslední vybranou čáru nebo bod @@ -1477,12 +1477,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Aktivovat/deaktivovat vazbu - + Activates or deactivates the selected constraints Aktivuje nebo deaktivuje vybrané vazby @@ -1503,12 +1503,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Přepnout řídící/referenční vazbu - + Set the toolbar, or the selected constraints, into driving or reference mode Nastavit panel nástrojů nebo vybrané vazby @@ -1597,54 +1597,54 @@ neplatných vazeb, degenerované geometrie atd. Přidat pevnou vazbu - + Add 'Block' constraint Přidat vazbu 'Blokace' - + Add block constraint Přidat vazbu blokace - - + + Add coincident constraint Přidat vazbu totožnosti - - + + Add distance from horizontal axis constraint Přidat vazbu vzdálenosti od vodorovné osy - - + + Add distance from vertical axis constraint Přidat vazbu vzdálenosti od svislé osy - - + + Add point to point distance constraint Přidat vazbu vzdálenosti dvou bodů - - + + Add point to line Distance constraint Přidat vazbu vzdálenosti bodu a čáry - - + + Add circle to circle distance constraint Přidat kruh do kružnice – omezení vzdálenosti - + Add circle to line distance constraint Přidání vazby vzdálenosti kružnice od čáry @@ -1653,8 +1653,8 @@ neplatných vazeb, degenerované geometrie atd. - - + + Add length constraint Přidat vazbu délky @@ -1776,159 +1776,159 @@ neplatných vazeb, degenerované geometrie atd. Přidat vazbu svislé vzdálenosti - + Add point to circle Distance constraint Přidat vazbu vzdálenosti bodu od kružnice - - + + Add point on object constraint Přidat vazbu bodu na objektu - - + + Add point to point horizontal distance constraint Přidat vazbu vodorovné vzdálenosti dvou bodů - + Add fixed x-coordinate constraint Přidat vazbu pevné souřadnice x - - + + Add point to point vertical distance constraint Přidat vazbu svislé vzdálenosti dvou bodů - + Add fixed y-coordinate constraint Přidat vazbu pevné souřadnice y - - + + Add parallel constraint Přidat paralelní vazbu - - - - - - - + + + + + + + Add perpendicular constraint Přidat kolmou vazbu - + Add perpendicularity constraint Přidat vazbu kolmosti - + Swap coincident+tangency with ptp tangency Prohodit shodnost+tečnost s tečností v bodech - + Swap PointOnObject+tangency with point to curve tangency Bod na křivce + tečnost prohodit s tečností v bodě křivky - - - - - - - + + + + + + + Add tangent constraint Přidat vazbu tečnosti - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Přidat vazbu bodu tečnosti - - - - + + + + Add radius constraint Přidat vazbu poloměru - - - - + + + + Add diameter constraint Přidat vazbu průměru - - - - + + + + Add radiam constraint Přidat vazbu poloměr-průměr - - - - + + + + Add angle constraint Přidat úhlovou vazbu - - + + Add equality constraint Přidat vazbu rovnosti - - - - - + + + + + Add symmetric constraint Přidat vazbu symetrie - + Add Snell's law constraint Přidat vazbu Snellova zákona - + Toggle constraint to driving/reference Přepnout vazbu na řídící/referenční - + Activate/Deactivate constraint Aktivovat/Deaktivovat vazbu @@ -2099,47 +2099,47 @@ neplatných vazeb, degenerované geometrie atd. Připojte se ke křivkám - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Ukázat vnitřní geometrii - + Create symmetric geometry Vytvořit symetrickou geometrii - + Copy/clone/move geometry Kopírovat/klonovat/přesunout geometrii - + Create copy of geometry Vytvořit kopii geometrie - + Delete all geometry Smazat veškerou geometrii - + Delete All Constraints Smazat všechny vazby - + Remove Axes Alignment Odstranit osové zarovnání @@ -2157,8 +2157,8 @@ neplatných vazeb, degenerované geometrie atd. Aktualizovat virtuální prostor vazby - + Add auto constraints Přidat automatické vazby @@ -2173,22 +2173,22 @@ neplatných vazeb, degenerované geometrie atd. Přejmenovat vazbu náčrtu - + Drag Point Přetáhnout bod - + Drag Curve Přetáhnout křivku - + Drag Constraint Přetáhnout vazbu - + Modify sketch constraints Upravit vazby náčrtu @@ -2227,6 +2227,11 @@ neplatných vazeb, degenerované geometrie atd. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2331,16 +2336,16 @@ neplatných vazeb, degenerované geometrie atd. Nelze vložit uzel mimo rozsah parametrů BSplajnu. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Index ToolWidget parametru mimo rozsah @@ -2406,20 +2411,8 @@ neplatných vazeb, degenerované geometrie atd. Nelze připojit - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ neplatných vazeb, degenerované geometrie atd. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Neplatný výběr @@ -2631,8 +2635,8 @@ neplatných vazeb, degenerované geometrie atd. - - + + Double constraint Dvojité omezení @@ -2648,8 +2652,8 @@ neplatných vazeb, degenerované geometrie atd. - - + + The selected edge already has a Block constraint! Vybraná hrana již má vazbu blokace! @@ -2661,7 +2665,7 @@ neplatných vazeb, degenerované geometrie atd. - + Select vertices from the sketch. Vyberte vrcholy z náčrtu. @@ -2686,29 +2690,29 @@ neplatných vazeb, degenerované geometrie atd. Vazba blokace nemůže být přidána, pokud je náčrt nevyřešený nebo pokud obsahuje nadbytečné či konfliktní vazby. - + Select one edge from the sketch. Vyberte jednu hranu z náčrtu. - + Select only edges from the sketch. Vyberte pouze hrany z náčrtu. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Počet vybraných objektů není 3 + - Error Chyba @@ -2723,75 +2727,75 @@ neplatných vazeb, degenerované geometrie atd. Vybrané položky nemohou přijmout vodorovnou nebo svislou vazbu! - + Endpoint to endpoint tangency was applied instead. Namísto toho byla aplikována tečnost v koncových bodech. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Vyberte dva nebo více vrcholů z náčrtu pro vazbu totožnosti nebo dvě nebo více kružnic, elips, oblouků nebo oblouků elips pro soustřednou vazbu. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Vyberte dva vrcholy z náčrtu pro vazbu totožnosti nebo dvě kružnice, elipsy, oblouky nebo oblouky elipsy pro soustřednou vazbu. - + Select exactly one line or one point and one line or two points from the sketch. Vyberte právě jednu úsečku nebo jeden bod a úsečku nebo dva body z náčrtu. - + Cannot add a length constraint on an axis! Nelze přidat délkovou vazbu osy! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Vyberte přesně jednu čáru nebo jeden bod a jednu čáru nebo dva body nebo dvě kružnice z náčrtu. - + This constraint does not make sense for non-linear curves. Tato vazba nedává smysl pro nelineární křivky. - + Endpoint to edge tangency was applied instead. Namísto toho byla použita tečnost hrany v koncovém bodě. - - - - - - + + + + + + Select the right things from the sketch. Výberte správné věci z náčrtu. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Vyberte hranu, která není váhou B-splajnu. @@ -2801,93 +2805,92 @@ neplatných vazeb, degenerované geometrie atd. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Žádný z vybraných bodů nebyl napojen na příslušnou křivku, protože jsou součástí téhož elementu nebo tvoří oba vnější geometrii. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Žádný z vybraných bodů nebyl napojen na příslušnou křivku, protože jsou buď součístí téhož elementu nebo tvoří oba vnější geometrii. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Vyberte právě jednu úsečku nebo až dva body z náčrtu. - + Cannot add a horizontal length constraint on an axis! Nelze přidat vodorovnou délkovou vazbu osy! - + Cannot add a fixed x-coordinate constraint on the origin point! Nelze přidat vazbu souřadnice x na počátek souřadnic! - - + + This constraint only makes sense on a line segment or a pair of points. Tato vazba má smysl pouze na segmentu čáry nebo na dvojici bodů. - + Cannot add a vertical length constraint on an axis! Nelze přidat svislou délkovou vazbu osy! - + Cannot add a fixed y-coordinate constraint on the origin point! Nelze přidat vazbu souřadnice y na počátek souřadnic! - + Select two or more lines from the sketch. Vyberte dvě nebo více úseček z náčrtu. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Vyberte nejméně dvě úsečky z náčrtu. - - Select a valid line. - Vyberte platnou úsečku. - - - - + The selected edge is not a valid line. Vybraná hrana není platnou úsečkou. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. - + Select some geometry from the sketch. perpendicular constraint Vyberte geometrii z náčrtu. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nelze přidat kolmou vazbu na volný bod! - - + + One of the selected edges should be a line. Jedna z vybraných hran by měla být úsečka. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Byla aplikována tečnost v koncových bodech. Vazba totožnosti byla smazána. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Byla použita tečnost hrany v koncovém bodě. Vazba bodu na objektu byla smazána. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. - + Select some geometry from the sketch. tangent constraint Vyberte geometrii z náčrtu. - - - + + + Cannot add a tangency constraint at an unconnected point! Nelze přidat tangentní vazbu na volný bod! - - + + Tangent constraint at B-spline knot is only supported with lines! Omezení tečny u B-spline uzlu je podporováno pouze čarami! - + B-spline knot to endpoint tangency was applied instead. Místo toho byl použit uzel B-spline k tečnosti koncového bodu. - - + + Wrong number of selected objects! Nesprávný počet vybraných objektů! - - + + With 3 objects, there must be 2 curves and 1 point. Mezi třemi objekty musí být 2 křivky a 1 bod. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Vyberte jeden nebo více oblouků nebo kružnic z náčrtu. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Vyberte buď pouze jeden nebo více pólů B-Splajnu nebo pouze jeden oblouk nebo kružnici z náčrtu, ale ne jejich kombinace. - - - + + + Constraint only applies to arcs or circles. Vazbu lze použít jen na oblouky nebo kružnice. - - + + Select one or two lines from the sketch. Or select two edges and a point. Vyberte jednu nebo dvě úsečky z náčrtu. Nebo vyberte dvě hrany a bod. @@ -3010,88 +3013,88 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Úhlová vazba nemůže být nastavena pro dvě rovnoběžné úsečky. - + Cannot add an angle constraint on an axis! Nelze přidat úhlovou vazbu na osu! - + Select two edges from the sketch. Vyberte dvě hrany z náčrtu. - + Select two or more compatible edges. Vyberte dvě nebo více kompatibilních hran. - + Sketch axes cannot be used in equality constraints. Osy náčrtu nelze použít pro vazby rovnosti. - + Equality for B-spline edge currently unsupported. Shodnost pro hranu B-splajnu momentálně není podporována. - - - + + + Select two or more edges of similar type. Vyberte dvě nebo více hran podobného typu. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Vyberte dva body a čáru symetrie, dva body a bod symetrie nebo čáru a bod symetrie z náčrtu. - - + + Cannot add a symmetry constraint between a line and its end points. Nelze přidat vazbu symetrie mezi čárou a jejími koncovými body. - - + + Cannot add a symmetry constraint between a line and its end points! Nelze přidat symetrickou vazbu mezi úsečku a její koncový bod! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Vyberte koncové body úsečky představující paprsek a hranu reprezentující rozhraní. První vybraný bod odpovídá indexu n1, druhý indexu n2, zadává se hodnota poměru n2/n1. - + Selected objects are not just geometry from one sketch. Vybrané objekty nejsou geometrií jednoho náčrtu. - + Cannot create constraint with external geometry only. Nejde vytvořit vazbu jen s vnější geometrií. - + Incompatible geometry is selected. Je vybrána nekompatibilní geometrie. + - - - - + + + Select constraints from the sketch. Vybrat vazby z náčrtu. @@ -3113,9 +3116,9 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Definovat stupeň B-Splajnu mezi 1 a %1: - + CAD Kernel Error Chyba jádra CADu @@ -3191,69 +3194,69 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Měly by být vybrány dva koncové body nebo totožný bod. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Vyberte elementy z jednoho náčrtu. - + No constraint selected Nebyla vybrána vazba - + At least one constraint must be selected Musí být vybrána alespoň jedna vazba - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Symetrická konstrukce vyžaduje alespoň dva geometrické elementy, poslední geometrický element je referenční pro vytvoření symetrie. - + The last element must be a point or a line serving as reference for the symmetry construction. Posdní element musí být bod nebo čára sloužící jako reference pro symetrickou konstrukci. - - + + A copy requires at least one selected non-external geometric element Kopie vyžaduje alespoň jeden vybraný geometrický element, který není vnější - + Delete All Geometry Smazat veškerou geometrii - + Are you really sure you want to delete all geometry and constraints? Jste si opravdu jisti, že chcete odstranit veškerou geometrii a vazby? - + Delete All Constraints Smazat všechny vazby - + Are you really sure you want to delete all the constraints? Jste si opravdu jisti, že chcete odstranit všechny vazby? - + Removal of axes alignment requires at least one selected non-external geometric element Odstranění osového zarovnání vyžaduje alespoň jeden vybraný geometrický element, který není vnější @@ -3334,6 +3337,11 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Délka: - + Refractive index ratio Index lomu - + Ratio n2/n1: Poměr n2/n1: @@ -4062,13 +4070,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Vytvořit pole + Create regular polygon + Vytvořit pravidelný mnohoúhelník - Number of Sides: - Počet stran: + Number of sides: + Number of sides: @@ -5072,112 +5080,112 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. SketcherGui::ViewProviderSketch - + Edit sketch Upravit náčrt - + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - + Do you want to close this dialog? Chcete zavřít tento dialog? - + Invalid sketch Neplatný náčrt - + Do you want to open the sketch validation tool? Chcete otevřít nástroje pro ověření náčrtu? - + The sketch is invalid and cannot be edited. Náčrt není platný a nemůže být upravován. - + Please remove the following constraint: Odstraňte, prosím, následující vazbu: - + Please remove at least one of the following constraints: Odstraňte, prosím, alespoň jednu z následujících vazeb: - + Please remove the following redundant constraint: Odstraňte, prosím, následující nadbytečnou vazbu: - + Please remove the following redundant constraints: Odstraňte, prosím, následující nadbytečné vazby: - + The following constraint is partially redundant: Toto omezení je částečně nadbytečné: - + The following constraints are partially redundant: Tato omezení jsou částečně nadbytečná: - + Please remove the following malformed constraint: Odstraňte prosím tuto poškozenou vazbu: - + Please remove the following malformed constraints: Odstraňte prosím tyto poškozené vazby: - + Empty sketch Prázdný náčrt - + Over-constrained: Převazbené: - + Malformed constraints: Poškozené vazby: - + Redundant constraints: Nadbytečné vazby: - + Partially redundant: Částečně nadbytečné: - + Solver failed to converge Řešič nezkonvergoval - + Under constrained: Nedostatečně omezené: - + %n DoF(s) %n Stupeň Volnosti(s) @@ -5188,7 +5196,7 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. - + Fully constrained Plně zavazbené @@ -5259,8 +5267,8 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Vytvoří klon geometrie, s naposledy vybraným bodem jako referenčním @@ -5268,17 +5276,17 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_CompCopy - + Clone Klon - + Copy Kopírovat - + Move Přesun @@ -5286,8 +5294,8 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Zadá průměr kružnice nebo oblouku @@ -5295,8 +5303,8 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Opravit poloměr/průměr kružnice nebo oblouku @@ -5304,8 +5312,8 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Zadá poloměr kružnice nebo oblouku @@ -5313,8 +5321,8 @@ Toto se provádí analýzou geometrií a vazeb náčrtu. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Vytvoří jednoduchou kopii geometrie s naposledy vybraným bodem jako referenčním @@ -5599,8 +5607,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Posune geometrii, s naposledy vybraným bodem jako referenčním @@ -5925,7 +5933,7 @@ Eigen Sparse QR algoritmus je optimalizován pro řídké matrice; obvykle rychl ViewProviderSketch - + and %1 more a %1 další @@ -6155,64 +6163,65 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Chyba - + Failed to delete all geometry Nepodařilo se odstranit celou geometrii - + Failed to delete all constraints Nepodařilo se odstranit všechny vazby - - + + Invalid selection Neplatný výběr - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Výběr nemá platnou geometrii. B-Splajny a body ještě nejsou podporovány. @@ -6222,18 +6231,18 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů.Omezení má neplatné informace o indexu a je chybné. - - - - - - - + + + + + + + Invalid Constraint Neplatná omezení @@ -6273,8 +6282,8 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů.Chyba při vytváření B-splajn pole - + Error creating B-spline Chyba při vytváření B-splajnu @@ -6330,16 +6339,17 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů.Přidání řádku se nezdařilo - - - - - - - - + + + + + + + + + Tool execution aborted Spuštění nástroje přerušeno @@ -6374,9 +6384,9 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů.Nepodařilo se oříznout okraj + - Value Error Chyba v hodnotě @@ -6430,6 +6440,11 @@ Rozteč mřížky se změní, pokud bude menší než tento počet pixelů.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6629,12 +6644,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherConstrainRadius - + Constrain radius Vazba poloměru - + Fix the radius of a circle or an arc Zadá poloměr kružnice nebo oblouku @@ -6751,12 +6766,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Odsadit vybrané geometrie. Pozitivní délka odsazení je směrem ven, záporná délka dovnitř. @@ -6889,12 +6904,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherConstrainCoincidentUnified - + Constrain coincident Vazba totožnosti - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6902,12 +6917,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7224,12 +7239,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7237,12 +7252,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7250,12 +7265,12 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7263,14 +7278,56 @@ Levé kliknutí na prázdné místo ověří aktuální vazbu. Pravým kliknutí CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 69ea423b36..c9787df78d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klonen - + Creates a clone of the geometry taking as reference the last selected point Erstellt einen Klon der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Bogen oder Kreis festlegen - + Constrain an arc or a circle Krümmung eines Kreisbogens oder Kreises festlegen - + Constrain radius Radius festlegen - + Constrain diameter Durchmesser festlegen - + Constrain auto radius/diameter Automatisch Radius oder Durchmesser festlegen @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klonen - + Creates a clone of the geometry taking as reference the last selected point Erstellt einen Klon der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Winkel festlegen - + Fix the angle of a line or the angle between two lines Winkel einer Linie (zur horizontalen Skizzenachse) oder Winkel zwischen zwei Linien festlegen @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Koinzidenz festlegen - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Erstellt eine Randbedingung Koinzidenz festlegen zwischen Punkten oder eine Randbedingung Konzentrisch festlegen zwischen Kreisen, Bögen und Ellipsen @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Durchmesser festlegen - + Fix the diameter of a circle or an arc Legt den Durchmesser eines Kreises oder Kreisbogens fest @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Abstand festlegen - + Fix a length of a line or the distance between a line and a vertex or between two circles Legt die Länge einer Linie, den Abstand zwischen einer Linie und einem Knotenpunkt oder zwischen zwei Kreisen fest @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Horizontalen Abstand festlegen - + Fix the horizontal distance between two points or line ends Den horizontalen Abstand zwischen zwei Punkten oder Streckenenden festlegen @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Vertikalen Abstand festlegen - + Fix the vertical distance between two points or line ends Den vertikalen Abstand zwischen zwei Punkten oder Streckenenden festlegen @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Gleichheit festlegen - + Create an equality constraint between two lines or between circles and arcs Eine Gleichheitsbeschränkung zwischen zwei Linien oder zwischen Kreisen und Bögen festlegen @@ -520,12 +520,12 @@ den vertikalen Abstand eines ausgewählten Knotens zum Ursprung CmdSketcherConstrainParallel - + Constrain parallel Parallel festlegen - + Create a parallel constraint between two lines Legt die Parallelität zweier Geraden fest @@ -533,12 +533,12 @@ den vertikalen Abstand eines ausgewählten Knotens zum Ursprung CmdSketcherConstrainPerpendicular - + Constrain perpendicular Rechtwinklig festlegen - + Create a perpendicular constraint between two lines Erstellt eine Randbedingung, die zwei Linien rechtwinklig zueinander festlegt @@ -546,12 +546,12 @@ den vertikalen Abstand eines ausgewählten Knotens zum Ursprung CmdSketcherConstrainPointOnObject - + Constrain point onto object Punkt auf Objekt festlegen - + Fix a point onto an object Punkt auf ein Objekt festlegen @@ -559,12 +559,12 @@ den vertikalen Abstand eines ausgewählten Knotens zum Ursprung CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Automatisch Radius oder Durchmesser festlegen - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Legt den Durchmesser fest, wenn ein Kreis ausgewählt wird, oder den Radius, wenn ein Kreisbogen oder Spline-Kontrollpunkt ausgewählt wird @@ -572,12 +572,12 @@ den vertikalen Abstand eines ausgewählten Knotens zum Ursprung CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Lichtbrechung (nach Snellius-Gesetz) festlegen - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Erstellen Sie eine Lichtbrechung (Snellius-Gesetz) als Einschränkung zwischen zwei Endpunkten der Strahlen und einer Kante als Schnittstelle. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Symmetrie festlegen - + Create a symmetry constraint between two points with respect to a line or a third point Die Symmetrie zwischen zwei Punkten im Bezug auf eine Linie oder einen dritten Punkt festlegen @@ -600,12 +600,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Tangential festlegen - + Create a tangent constraint between two entities Legt zwei Elementen tangential zueinander fest @@ -639,12 +639,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Kopieren - + Creates a simple copy of the geometry taking as reference the last selected point Erstellt eine einfache Kopie der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -784,7 +784,7 @@ with respect to a line or a third point Create fillet - Verrundung erstellen + Abrundung erstellen @@ -1029,12 +1029,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Alle Randbedingungen löschen - + Delete all constraints in the sketch Löscht alle Randbedingungen in der Skizze @@ -1042,12 +1042,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Gesamte Geometrie löschen - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Alle Geometrien und Randbedingungen aus der aktuellen Skizze löschen, mit Ausnahme der externen Geometrie @@ -1230,12 +1230,12 @@ als Spiegelreferenz verwendet werden. CmdSketcherMove - + Move Verschieben - + Moves the geometry taking as reference the last selected point Verschiebt die Geometrie und verwendet den zuletzt ausgewählten Punkt als Referenz @@ -1256,12 +1256,12 @@ als Spiegelreferenz verwendet werden. CmdSketcherRectangularArray - + Rectangular array Rechteckige Anordnung - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Erzeugt eine rechteckige Anordnung der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -1269,12 +1269,12 @@ als Spiegelreferenz verwendet werden. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Achsenausrichtung entfernen - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Ändert Einschränkungen, um Achsenausrichtungen zu entfernen und versucht gleichzeitig, die Beziehungen zwischen den Einschränkungen der Auswahl zu erhalten @@ -1297,12 +1297,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Interne Geometrie anzeigen / ausblenden - + Show all internal geometry or hide unused internal geometry Sämtliche interne Geometrie anzeigen oder ungenutzte interne Geometrie ausblenden @@ -1310,8 +1310,8 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Widersprüchliche Randbedingungen auswählen @@ -1319,12 +1319,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectConstraints - + Select associated constraints Zugehörige Randbedingungen auswählen - + Select the constraints associated with the selected geometrical elements Wählt die Randbedingungen aus, die zu den ausgewählten geometrischen Elementen gehören @@ -1332,12 +1332,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Zugehörige Geometrie auswählen - + Select the geometrical elements associated with the selected constraints Wählt die geometrischen Elemente aus, die den ausgewählten Randbedingungen zugeordnet sind @@ -1345,12 +1345,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Unterbestimmte Elemente auswählen - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Geometrische Elemente auswählen, bei denen der Löser noch nicht-bestimmte Freiheitsgrade erkennt. @@ -1358,12 +1358,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Horizontale Achse auswählen - + Select the local horizontal axis of the sketch Wählt die lokale horizontale Achse der Skizze aus @@ -1371,8 +1371,8 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Wähle fehlerhafte Randbedingungen @@ -1380,12 +1380,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectOrigin - + Select origin Ursprung auswählen - + Select the local origin point of the sketch Wählt den lokalen Ursprungspunkt der Skizze aus @@ -1393,8 +1393,8 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Teilweise überflüssige Randbedingungen auswählen @@ -1402,8 +1402,8 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Überflüssige Randbedingungen auswählen @@ -1411,12 +1411,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSelectVerticalAxis - + Select vertical axis Vertikale Achse auswählen - + Select the local vertical axis of the sketch Wählt die lokale vertikale Achse der Skizze aus @@ -1463,12 +1463,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherSymmetry - + Symmetry Symmetrie - + Creates symmetric geometry with respect to the last selected line or point Erstellt symmetrische Geometrie mit Bezug auf die zuletzt ausgewählte Linie oder Punkt @@ -1476,12 +1476,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Randbedingungen aktivieren/deaktivieren - + Activates or deactivates the selected constraints Aktiviert oder deaktiviert die ausgewählten Einschränkungen @@ -1502,12 +1502,12 @@ Die Eigenschaft 'Support' wird gelöscht. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Einschränkung zwischen festlegend und anzeigend umschalten - + Set the toolbar, or the selected constraints, into driving or reference mode Die Symbolleiste oder die ausgewählten Einschränkungen @@ -1596,54 +1596,54 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Randbedingung Sperren hinzufügen - + Add 'Block' constraint Randbedingung 'Fixieren' hinzufügen - + Add block constraint Randbedingung Fixieren hinzufügen - - + + Add coincident constraint Randbedingung Koinzidenz festlegen hinzufügen - - + + Add distance from horizontal axis constraint Randbedingung Abstand von der horizontalen Achse hinzufügen - - + + Add distance from vertical axis constraint Randbedingung Abstand von der vertikalen Achse hinzufügen - - + + Add point to point distance constraint Randbedingung Punk-zu-Punkt-Abstand hinzufügen - - + + Add point to line Distance constraint Randbedingung Punkt-zu-Line-Abstand hinzufügen - - + + Add circle to circle distance constraint Randbedingung Kreis-zu-Kreis-Abstand hinzufügen - + Add circle to line distance constraint Randbedingung Kreis-zu-Line-Abstand hinzufügen @@ -1652,8 +1652,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - + + Add length constraint Randbedingung Abstand hinzufügen @@ -1775,159 +1775,159 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Randbedingung Länge Y festlegen hinzufügen - + Add point to circle Distance constraint Randbedingung Punkt-zu-Kreis-Abstand hinzufügen - - + + Add point on object constraint Randbedingung Punkt-auf-Objekt hinzufügen - - + + Add point to point horizontal distance constraint Randbedingung Horizontaler Punkt-zu-Punkt-Abstand hinzufügen - + Add fixed x-coordinate constraint Randbedingung X-Koordinate festlegen hinzufügen - - + + Add point to point vertical distance constraint Randbedingung Vertikaler Punkt-zu-Punkt-Abstand hinzufügen - + Add fixed y-coordinate constraint Randbedingung Y-Koordinate festlegen hinzufügen - - + + Add parallel constraint Randbedingung Parallel festlegen hinzufügen - - - - - - - + + + + + + + Add perpendicular constraint Randbedingung Rechtwinklig festlegen hinzufügen - + Add perpendicularity constraint Randbedingung Rechtwinkligkeit festlegen hinzufügen - + Swap coincident+tangency with ptp tangency Deckungsgleichheit + Berührung gegen tangentenstetigen Übergang in einem Punkt tauschen - + Swap PointOnObject+tangency with point to curve tangency Tausche Punkt auf Objekt + Tangentialität gegen Punkt zu Kurve Tangentialität - - - - - - - + + + + + + + Add tangent constraint Randbedingung Tangential festlegen hinzufügen - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Randbedingung Tangente im Punkt festlegen hinzufügen - - - - + + + + Add radius constraint Randbedingung Radius festlegen hinzufügen - - - - + + + + Add diameter constraint Randbedingung Durchmesser festlegen hinzufügen - - - - + + + + Add radiam constraint Randbedingung Radiam festlegen hinzufügen - - - - + + + + Add angle constraint Randbedingung Winkel festlegen hinzufügen - - + + Add equality constraint Randbedingung Gleichheit festlegen hinzufügen - - - - - + + + + + Add symmetric constraint Randbedingung Symmetrie festlegen hinzufügen - + Add Snell's law constraint Randbedingung nach Snellius-Gesetz hinzufügen - + Toggle constraint to driving/reference Randbedingung zwischen festlegend/anzeigend umschalten - + Activate/Deactivate constraint Randbedingung aktivieren / deaktivieren @@ -2035,7 +2035,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Create fillet - Abrundung erstellen + Verrundung erstellen @@ -2098,47 +2098,47 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Kurven verbinden - + Cut in Sketcher - Cut in Sketcher + Ausschneiden im Sketcher - + Paste in Sketcher - Paste in Sketcher + Einfügen im Sketcher - + Exposing Internal Geometry Interne Geometrie anzeigen - + Create symmetric geometry Symmetrische Geometrie erstellen - + Copy/clone/move geometry Geometrie kopieren / klonen / verschieben - + Create copy of geometry Eine Kopie der Geometrie erstellen - + Delete all geometry Gesamte Geometrie löschen - + Delete All Constraints Alle Randbedingungen löschen - + Remove Axes Alignment Achsenausrichtung entfernen @@ -2156,8 +2156,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Virtuellen Raum der Einschränkungen aktualisieren - + Add auto constraints Automatische Randbedingungen hinzufügen @@ -2172,22 +2172,22 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Skizzeneinschränkung umbenennen - + Drag Point Punkt ziehen - + Drag Curve Kurve ziehen - + Drag Constraint Randbedingung ziehen - + Modify sketch constraints Skizzeneinschränkung ändern @@ -2224,7 +2224,12 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Scale geometries - Scale geometries + Geometrie skalieren + + + + Translate geometries + Translate geometries @@ -2330,16 +2335,16 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Knoten kann nicht außerhalb des BSpline-Parameterbereichs eingefügt werden. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget-Parameterindex außerhalb des Bereichs @@ -2405,20 +2410,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Nicht anhängen - - - - - - - - - - - - @@ -2429,133 +2422,144 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Falsche Auswahl @@ -2630,8 +2634,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - + + Double constraint Doppelbedingung @@ -2647,8 +2651,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - + + The selected edge already has a Block constraint! Die ausgewählte Kante hat bereits eine Fixier-Einschränkung! @@ -2660,7 +2664,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - + Select vertices from the sketch. Wählen Sie Knoten aus der Skizze aus. @@ -2685,29 +2689,29 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Eine Fixier-Randbedingung kann nicht hinzugefügt werden, solange die Skizze nicht gelöst ist oder redundante und / oder widersprüchliche Einschränkungen enthält. - + Select one edge from the sketch. Wähle eine Kante aus der Skizze aus. - + Select only edges from the sketch. Wähle nur Kanten aus der Skizze aus. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + Nur Tangente-Über-Punkt wird von einem B-Spline unterstützt. - + Number of selected objects is not 3 Die Anzahl der ausgewählten Objekte ist nicht 3 + - Error Fehler @@ -2722,171 +2726,170 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Die ausgewählten Elemente können nicht horizontal oder vertikal eingeschränkt werden! - + Endpoint to endpoint tangency was applied instead. Die Endpunkt zu Endpunkt Tangente wurde stattdessen angewendet. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Wähle zwei oder mehr Knotenpunkte aus der Skizze für eine Übereinstimmungseinschränkung, oder zwei oder mehr Kreise, Ellipsen, Bögen oder Ellipsenbögen für einen konzentrischen Zwang. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Wähle zwei Knotenpunkte aus der Skizze für eine Übereinstimmunseinschränkung aus, oder zwei Kreise, Ellipsen, Bögen oder Ellipsenbögen für einen konzentrischen Zwang. - + Select exactly one line or one point and one line or two points from the sketch. Wählen Sie genau eine Linie oder einen Punkt und eine Linie oder zwei Punkte aus der Skizze aus. - + Cannot add a length constraint on an axis! Keine Längenbeschränkung einer Achse möglich! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Wählen Sie genau eine Linie oder einen Punkt und eine Linie oder zwei Punkte oder zwei Kreise aus der Skizze aus. - + This constraint does not make sense for non-linear curves. Diese Randbedingung ist für nichtlineare Kurven nicht sinnvoll. - + Endpoint to edge tangency was applied instead. Die Endpunkt zu Kante Tangente wurde stattdessen angewendet. - - - - - - + + + + + + Select the right things from the sketch. Wähle die richtigen Dinge aus der Skizze. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Eine Kante auswählen, die kein B-Spline-Gewicht darstellt. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + Ein oder zwei Punkt-auf-Objekt Randbedingungen wurden gelöscht, da die neueste Einschränkung, die intern angewendet wird, auch Punkt-auf-Objekt anwendet. - + Select either several points, or several conics for concentricity. Entweder mehrere Punkte auswählen oder mehrere Kegelschnittkurven für Konzentrizität. - + Select either one point and several curves, or one curve and several points Entweder einen Punkt und mehrere Kurven oder eine Kurve und mehrere Punkte auswählen - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Entweder einen Punkt und mehrere Kurven oder eine Kurve und mehrere Punkte auswählen für PunktAufObjekt, mehrere Punkte für Koinzidenz, oder mehrere Kegelschnittkurven für Konzentrizität. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Keiner der ausgewählten Punkte wurde auf die jeweiligen Kurven beschränkt, da sie Teile desselben Elements sind, weil beide externe Geometrien sind oder weil die Kante nicht geeignet ist. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Keiner der gewählten Punkte wurde beschränkt auf die zugehörigen Kurven. Sie sind entweder Bestandteil des gleichen Elements oder Sie sind beide Externe Geometrie. - + Cannot add a length constraint on this selection! Kann keine Randbedingung Abstand festlegen auf dieser Auswahl basierend hinzufügen! - - - - + + + + Select exactly one line or up to two points from the sketch. Wählen Sie genau eine Linie oder bis zu zwei Punkte aus der Skizze aus. - + Cannot add a horizontal length constraint on an axis! Keine horizontale Längenbeschränkung einer Achse möglich! - + Cannot add a fixed x-coordinate constraint on the origin point! Eine feste x-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! - - + + This constraint only makes sense on a line segment or a pair of points. Diese Randbedingung ist nur für ein Liniensegment oder ein Punktepaar sinnvoll. - + Cannot add a vertical length constraint on an axis! Keine vertikale Längenbeschränkung einer Achse möglich! - + Cannot add a fixed y-coordinate constraint on the origin point! Eine feste y-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! - + Select two or more lines from the sketch. Wählen Sie zwei oder mehr Linien aus der Skizze aus. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Wählen Sie mindestens zwei Linien aus der Skizze aus. - - Select a valid line. - Eine gültige Linie auswählen. - - - - + The selected edge is not a valid line. Die ausgewählte Kante ist keine gültige Linie. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2896,35 +2899,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Erlaubte Kombinationen: zwei Kurven; einen Endpunkt und eine Kurve; zwei Endpunkte; zwei Kurven und einen Punkt. - + Select some geometry from the sketch. perpendicular constraint Geometrie aus der Skizze auswählen. - - + + Cannot add a perpendicularity constraint at an unconnected point! Eine Rechtwinkligkeitsbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! - - + + One of the selected edges should be a line. Eine der ausgewählten Kanten sollte eine Gerade sein. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Eine Endpunkt-zu-Endpunkt-Tangente wurde angelegt. Die Koinzidenz-Einschränkung wurde gelöscht. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Die Endpunkt zu Kante Tangente wurde stattdessen angewendet. Die Punkt auf Objekt Beschränkung wurde gelöscht. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2934,67 +2937,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpunkte; Zwei Kurven und ein Punkt. - + Select some geometry from the sketch. tangent constraint Geometrie aus der Skizze auswählen. - - - + + + Cannot add a tangency constraint at an unconnected point! Eine Tangentialrandbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! - - + + Tangent constraint at B-spline knot is only supported with lines! Randbedingung Tangential festlegen wird am B-Spline-Knoten wird nur mit Linien unterstützt! - + B-spline knot to endpoint tangency was applied instead. Eine B-Spline-Knoten zu Endpunkt Tangente wurde stattdessen festgelegt. - - + + Wrong number of selected objects! Falsche Anzahl von ausgewählten Objekten! - - + + With 3 objects, there must be 2 curves and 1 point. Bei 3 Objekten müssen diese aus 2 Kurven und 1 Punkt bestehen. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Wählen Sie eine oder mehrere Bögen oder Kreise aus der Skizze. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Entweder nur einen oder mehrere B-Spline-Kontrollpunkte auswählen oder nur einen oder mehrere Bögen oder Kreise aus der Skizze auswählen, aber nicht gemischt. - - - + + + Constraint only applies to arcs or circles. Einschränkung gilt nur für Bögen oder Kreise. - - + + Select one or two lines from the sketch. Or select two edges and a point. Wählen Sie eine oder zwei Linien aus der Skizze. Oder wählen Sie zwei Kanten und einen Punkt. @@ -3009,88 +3012,88 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Es ist nicht möglich eine Winkel-Einschränkung für zwei parallele Linien festzulegen. - + Cannot add an angle constraint on an axis! Winkelbeschränkung einer Achse nicht möglich! - + Select two edges from the sketch. Wählen Sie zwei Kanten aus der Skizze aus. - + Select two or more compatible edges. Wählen Sie zwei oder mehr kompatible Kanten aus. - + Sketch axes cannot be used in equality constraints. Skizzenachsen können nicht mit der Randbedingung Gleichheit festlegen eingesetzt werden. - + Equality for B-spline edge currently unsupported. Gleichheit für B-Spline Rand wird derzeit nicht unterstützt. - - - + + + Select two or more edges of similar type. Zwei oder mehr gleichartige Kanten auswählen. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Wählen Sie zwei Punkte und eine Symmetrielinie, zwei Punkte und einen Symmetriepunkt oder eine Linie und einen Symmetriepunkt von der Skizze. - - + + Cannot add a symmetry constraint between a line and its end points. Es ist nicht möglich eine Symmetrieeinschränkung zwischen einer Linie und ihren Endpunkten hinzuzufügen. - - + + Cannot add a symmetry constraint between a line and its end points! Es ist nicht möglich eine Symmetrieeinschränkung zwischen einer Linie und ihren Endpunkten hinzuzufügen! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Endpunkte zweier Linien, die als Strahlen dienen sollen, und eine Kante, die eine Grenze darstellt, auswählen. Der erste gewählte Punkt entspricht dem Index n1, der zweite dem Index n2 und der Eigabewert legt das Verhältnis n2/n1 fest. - + Selected objects are not just geometry from one sketch. Ausgewählte Objekte sind nicht nur Geometrie aus einer einzigen Skizze. - + Cannot create constraint with external geometry only. Es ist nicht möglich eine Einschränkung zu erstellen, die nur auf externen Geometrien basiert. - + Incompatible geometry is selected. Es wurde unpassende Geometrie ausgewählt. + - - - - + + + Select constraints from the sketch. Einschränkungen aus der Skizze auswählen. @@ -3112,9 +3115,9 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun B-Spline-Grad, zwischen 1 und %1 festlegen: - + CAD Kernel Error CAD-Kernel-Fehler @@ -3190,69 +3193,69 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Es sollten zwei Endpunkte oder zwei deckungsgleiche (koinzidente) Punkte ausgewählt werden. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Wähle Elemente aus einer einzigen Skizze. - + No constraint selected Keine Randbedingung ausgewählt - + At least one constraint must be selected Mindestens eine Randbedingung muss ausgewählt sein - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Eine symmetrische Konstruktion erfordert mindestens zwei geometrische Elemente. Das letzte geometrische Element wird die Referenz für die Symmetrie. - + The last element must be a point or a line serving as reference for the symmetry construction. Das letzte Element, das als Referenz für die Symmetrie dient, muss ein Punkt oder eine Linie sein. - - + + A copy requires at least one selected non-external geometric element Eine Kopie benötigt mindestens ein ausgewähltes nicht-externes geometrisches Element - + Delete All Geometry Gesamte Geometrie löschen - + Are you really sure you want to delete all geometry and constraints? Sollen wirklich alle Geometrien und Randbedingungen gelöscht werden? - + Delete All Constraints Alle Randbedingungen löschen - + Are you really sure you want to delete all the constraints? Sollen wirklich alle Randbedingungen gelöscht werden? - + Removal of axes alignment requires at least one selected non-external geometric element Das Entfernen der Achsenausrichtung erfordert mindestens ein ausgewähltes nicht-externes geometrisches Element @@ -3331,7 +3334,12 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Scale parameters - Scale parameters + Parameter der Skalierung + + + + Translate parameters + Translate parameters @@ -3643,12 +3651,12 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Länge: - + Refractive index ratio Brechungsindex-Verhältnis - + Ratio n2/n1: Verhältnis n2/n1: @@ -4061,13 +4069,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Array erstellen + Create regular polygon + Regelmäßiges Vieleck erstellen - Number of Sides: - Anzahl Seiten: + Number of sides: + Number of sides: @@ -4086,7 +4094,7 @@ reflected on copies Task panel widgets - Task panel widgets + Widgets des Aufgaben-Bereichs @@ -4140,7 +4148,7 @@ Erfordert das erneute aktivieren des Bearbeitungsmodus. Notifies about automatic constraint substitutions - Benachrichtigt beim automatischen Ersetzen von Einschränkungen + Benachrichtigt beim automatischen Ersetzen von Randbedingungen @@ -4170,7 +4178,7 @@ Erfordert das erneute aktivieren des Bearbeitungsmodus. Dimension constraint - Dimension constraint + Maßliche Randbedingung @@ -4179,11 +4187,11 @@ Erfordert das erneute aktivieren des Bearbeitungsmodus. 'Separated tools': Individual tools for each dimensioning constraint. 'Both': You will have both the 'Dimension' tool and the separated tools. This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Wählen Sie die Art der maßlichen Randbedingungen für Ihre Werkzeugleiste: +'Einzelnes Werkzeug': Ein einzelnes Werkzeug für alle Bemaßungen in der Werkzeugleiste: Entfernung, Abstand X / Y, Winkel, Radius. (Weitere im Dropdown) +'Getrennte Werkzeuge': Individuelle Werkzeuge für jede maßliche Randbedingung. +'Beides': Zeigt das kombinierte Bemaßungs-Werkzeug (Dimension) sowie die einzelnen Werkzeuge an. +Diese Einstellung ist nur für die Werkzeugleiste. Unabhängig von der Auswahl sind alle Werkzeuge immer im Menü und über Tastenkürzel verfügbar. @@ -4191,10 +4199,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Bei Verwendung des Bemaßungs-Werkzeugs kann gewählt werden, wie Kreise und Bögen bemaßt werden: +'Auto': Das Werkzeug wird Radius-Maße auf Bögen und Durchmesser-Maße auf Kreise anwenden. +'Durchmesser': Das Werkzeug wird sowohl auf Bögen als auch Kreise Durchmesser-Maße anwenden. +'Radius': Das Werkzeug wird sowohl auf Bögen als auch Kreise Radius-Maße anwenden. @@ -4204,7 +4212,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + In-Ansicht-Parameter: @@ -5071,112 +5079,112 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. SketcherGui::ViewProviderSketch - + Edit sketch Skizze bearbeiten - + A dialog is already open in the task panel Ein Dialog im Arbeitspanel ist bereits geöffnet - + Do you want to close this dialog? Möchten Sie dieses Dialogfeld schließen? - + Invalid sketch Ungültige Skizze - + Do you want to open the sketch validation tool? Soll das Werkzeug zum Überprüfen der Skizze geöffnet werden? - + The sketch is invalid and cannot be edited. Die Skizze ist ungültig und kann nicht bearbeitet werden. - + Please remove the following constraint: Bitte folgende Randbedingungen entfernen: - + Please remove at least one of the following constraints: Bitte mindestens eine der folgenden Randbedingungen entfernen: - + Please remove the following redundant constraint: Bitte folgende redundante Randbedingungen entfernen: - + Please remove the following redundant constraints: Bitte folgende, redundante Randbedingungen entfernen: - + The following constraint is partially redundant: Die folgende Randbedingung ist teilweise überflüssig: - + The following constraints are partially redundant: Die folgenden Randbedingungen sind teilweise überflüssig: - + Please remove the following malformed constraint: Bitte folgende fehlerhafte Beschränkung entfernen: - + Please remove the following malformed constraints: Bitte folgende fehlerhafte Beschränkung entfernen: - + Empty sketch Leere Skizze - + Over-constrained: Überbestimmt: - + Malformed constraints: Fehlerhafte Randbedingungen: - + Redundant constraints: Überflüssige Randbedingungen: - + Partially redundant: Teilweise redundant: - + Solver failed to converge Löser konnte nicht konvergieren - + Under constrained: Unterbestimmt: - + %n DoF(s) %n Freiheitsgrad @@ -5184,7 +5192,7 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. - + Fully constrained Vollständig bestimmt @@ -5255,8 +5263,8 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Erstellt einen Klon der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -5264,17 +5272,17 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_CompCopy - + Clone Klonen - + Copy Kopieren - + Move Verschieben @@ -5282,8 +5290,8 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Legt den Durchmesser eines Kreises oder Kreisbogens fest @@ -5291,8 +5299,8 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Legt den Radius eines Kreisbogens oder den Durchmesser eines Kreises fest @@ -5300,8 +5308,8 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Legt den Radius eines Kreises oder Kreisbogens fest @@ -5309,8 +5317,8 @@ Dies erfolgt durch Analyse der Skizzengeometrien und Randbedingungen. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Erstellt eine einfache Kopie der Geometrie mit dem zuletzt gewählten Punkt als Referenz @@ -5595,8 +5603,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Verschiebt die Geometrie und verwendet den zuletzt ausgewählten Punkt als Referenz @@ -5920,7 +5928,7 @@ Eigen Sparse QR ein Algorithmus, der für dünn besetzte Matrizen optimiert ist; ViewProviderSketch - + and %1 more und %1 mehr @@ -6150,64 +6158,65 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Fehlermeldungen - + Failed to delete all geometry Löschen aller Geometrie fehlgeschlagen - + Failed to delete all constraints Löschen aller Randbedingungen fehlgeschlagen - - + + Invalid selection Ungültige Auswahl - + Selection has no valid geometries. Die Auswahl hat keine gültigen Geometrien. - + Selection has no valid geometries. BSplines, Points are not supported yet. Auswahl enthält keine gültige Geometrie. B-Splines und Punkte werden noch nicht unterstützt. @@ -6217,18 +6226,18 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Die Randbedingng hat eine ungültige Indexierung und ist fehlerhaft. - - - - - - - + + + + + + + Invalid Constraint Ungültige Randbedingung @@ -6268,8 +6277,8 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Fehler beim Erstellen des B-spline Kontrollpunktes - + Error creating B-spline Fehler beim Erstellen des B-splines @@ -6325,16 +6334,17 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Linie hinzufügen fehlgeschlagen - - - - - - - - + + + + + + + + + Tool execution aborted Werkzeugausführung abgebrochen @@ -6369,9 +6379,9 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Trimmen der Kante fehlgeschlagen + - Value Error Wertfehler @@ -6423,7 +6433,12 @@ Die Rasterweite ändert sich, wenn er kleiner als diese Anzahl von Pixeln wird.< Failed to scale - Failed to scale + Skalieren fehlgeschlagen + + + + Failed to translate + Failed to translate @@ -6583,7 +6598,7 @@ Punkte müssen näher als ein Fünftel der Rasterweite an eine Rasterlinie geset Dimension - Bemaßung + Abmessung @@ -6613,7 +6628,7 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Dimension - Abmessung + Bemaßung @@ -6624,12 +6639,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte CmdSketcherConstrainRadius - + Constrain radius Radius festlegen - + Fix the radius of a circle or an arc Legt den Radius eines Kreises oder Kreisbogens fest @@ -6746,12 +6761,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte CmdSketcherOffset - + Offset geometry Versatzkontur - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Versetzt ausgewählte Geometrien. Eine positiver Versatzwert versetzt die Geometrie nach außen, ein negativer Wert nach innen. @@ -6771,7 +6786,7 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + Dies betrifft die maßlichen Randbedingungen (z.B. Abstand). Wenn klonen aktiviert ist, wird das Werkzeug die Randbedingungen kopieren. Andernfalls wird es versuchen, sie durch geeignete Gleichheiten zu ersetzen. @@ -6884,12 +6899,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte CmdSketcherConstrainCoincidentUnified - + Constrain coincident Koinzidenz festlegen - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Erstellt eine Randbedingung Koinzidenz festlegen zwischen Punkten, eine Randbedingung Punkt auf Objekt festlegen zwischen einem Punkt und einer Kante oder eine Randbedingung Konzentrisch festlegen zwischen Kreisen, Bögen und Ellipsen @@ -6897,12 +6912,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte CmdSketcherRotate - + Polar transform Polar-Transformierung - + Rotate selected geometries, making n copies, enable creation of circular patterns. Ausgewählte Geometrien drehen, n-mal kopieren, erlaubt kreisförmige Muster zu erzeugen. @@ -7011,12 +7026,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Line pattern of normal edges. - Line pattern of normal edges. + Linienart normaler Kanten. Width of normal edges. - Width of normal edges. + Linienbreite normaler Kanten. @@ -7036,12 +7051,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Line pattern of construction edges. - Line pattern of construction edges. + Linienart der Hilfslinien. Width of construction edges. - Width of construction edges. + Linienbreite der Hilfslinien. @@ -7061,12 +7076,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + Linienart intern ausgerichteter Kanten. Width of internal aligned edges. - Width of internal aligned edges. + Linienbreite intern ausgerichteter Kanten. @@ -7081,12 +7096,12 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Line pattern of external edges. - Line pattern of external edges. + Linienart externer Kanten. Width of external edges. - Width of external edges. + Linienbreite externer Kanten. @@ -7184,7 +7199,7 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Anzahl der Kopien (+ 'U' / - 'J') @@ -7192,7 +7207,7 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Anzahl der Seiten (+ 'U' / - 'J') @@ -7200,7 +7215,7 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Keep original geometries (U) - Keep original geometries (U) + Originalgeometrie behalten (U) @@ -7208,64 +7223,106 @@ Ein Linksklick auf einen leeren Bereich, bestätigt die aktuell vorausgewählte Constrain - Constrain + Festlegen Constrain tools. - Constrain tools. + Randbedingungs-Werkzeuge. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + K&opieren im Sketcher - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Kopiert ausgewählte Geometrien und Randbedingungen in die Zwischenablage CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + A&usschneiden im Sketcher - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Schneidet ausgewählte Geometrien und Randbedingungen aus und legt sie in die Zwischenablage CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + E&infügen im Sketcher - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Fügt ausgewählte Geometrien und Randbedingungen aus der Zwischenablage ein CmdSketcherScale - + Scale transform - Scale transform + Skalierungs-Transformation - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Ausgewählte Geometrien skalieren. Nach Auswahl des Mittelpunktes kann entweder der Skalierungsfaktor eingeben, oder zwei Referenzpunkte ausgewählt weden (dann ist der Skalierungsfaktor = Länge(p2-Mitte) / Länge(p1-Mitte)). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Randbedingungen klonen + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts index c09f9d8c47..424601890a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Κλωνοποιήστε - + Creates a clone of the geometry taking as reference the last selected point Δημιουργεί έναν κλώνο του γεωμετρικού στοιχείου λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Περιορισμός τόξου ή κύκλου - + Constrain an arc or a circle Περιόρισε ένα τόξο ή έναν κύκλο - + Constrain radius Περιορισμός ακτίνας - + Constrain diameter Περιορισμός διαμέτρου - + Constrain auto radius/diameter Περιορισμός αυτόματης ακτίνας/διαμέτρου @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Κλωνοποιήστε - + Creates a clone of the geometry taking as reference the last selected point Δημιουργεί έναν κλώνο του γεωμετρικού στοιχείου λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Περιορισμός γωνίας - + Fix the angle of a line or the angle between two lines Καθορισμός της γωνίας μιας γραμμής ή της γωνίας μεταξύ δύο γραμμών @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Περιορισμός ταύτισης - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Δημιουργία ενός περιορισμού σύμπτωσης μεταξύ σημείων ή ενός ομόκεντρου περιορισμού μεταξύ κύκλων, τόξων και ελλείψεων @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Περιορισμός διαμέτρου - + Fix the diameter of a circle or an arc Όρισε τη σταθερή διάμετρο ενός κύκλου, ή ενός τόξου @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Περιορισμός απόστασης - + Fix a length of a line or the distance between a line and a vertex or between two circles Καθορίστε ένα μήκος μιας γραμμής ή την απόσταση μεταξύ μιας γραμμής και μιας κορυφής ή μεταξύ δύο κύκλων @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Καθορισμός της οριζόντιας απόστασης μεταξύ δύο σημείων ή μεταξύ τελικών σημείων γραμμών @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Καθορισμός της κατακόρυφης απόστασης μεταξύ δύο σημείων ή μεταξύ τελικών σημείων γραμμών @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Περιορισμός ισότητας - + Create an equality constraint between two lines or between circles and arcs Δημιουργία ενός περιορισμού ισότητας μεταξύ δύο γραμμών ή μεταξύ κύκλων και τόξων @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Περιορισμός παραλληλίας - + Create a parallel constraint between two lines Δημιουργήστε έναν περιορισμό παραλληλίας μεταξύ δύο γραμμών @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Περιορισμός καθετότητας - + Create a perpendicular constraint between two lines Δημιουργία ενός περιορισμού καθετότητας μεταξύ δύο γραμμών @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Περιορισμός θέσης σημείου σε αντικείμενο - + Fix a point onto an object Καθορισμός της θέσης ενός σημείου σε ένα αντικείμενο @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Περιορισμός αυτόματης ακτίνας/διαμέτρου - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Διορθώστε τη διάμετρο, εάν επιλέξεται κύκλο, ή την ακτίνα ενός τόξου/σπιράλ @@ -573,12 +573,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -588,12 +588,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Περιορισμός συμμετρίας - + Create a symmetry constraint between two points with respect to a line or a third point Δημιουργία περιορισμού συμμετρίας μεταξύ δύο σημείων ως προς μια γραμμή ή ένα τρίτο σημείο @@ -602,12 +602,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Περιορισμός εφαπτομένης - + Create a tangent constraint between two entities Δημιουργία ενός περιορισμού επαφής μεταξύ δύο οντοτήτων @@ -641,12 +641,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Αντιγραφή - + Creates a simple copy of the geometry taking as reference the last selected point Δημιουργεί ένα απλό αντίγραφο του γεωμετρικού στοιχείου λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -1031,12 +1031,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Διαγραφή όλων των περιορισμών - + Delete all constraints in the sketch Διαγραφή όλων των περιορισμών στο σχέδιο @@ -1044,12 +1044,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Διαγραφή όλων των γεωμετριών και των περιορισμών στο τρέχον σχέδιο, με εξαίρεση την εξωτερική γεωμετρία @@ -1231,12 +1231,12 @@ as mirroring reference. CmdSketcherMove - + Move Μετακινήστε - + Moves the geometry taking as reference the last selected point Μετακινεί το γεωμετρικό στοιχείο λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -1257,12 +1257,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Ορθογωνική Διάταξη - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Δημιουργεί ένα μοτίβο ορθογώνιας συστοιχίας της γεωμετρίας λαμβάνοντας ως αναφορά το τελευταίο επιλεγμένο σημείο @@ -1270,12 +1270,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1298,12 +1298,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Εμφάνιση/απόκρυψη εσωτερικής γεωμετρίας - + Show all internal geometry or hide unused internal geometry Εμφάνιση όλης της εσωτερικής γεωμετρίας ή απόκρυψη της εσωτερικής γεωμετρίας που δεν χρησιμοποιείται @@ -1311,8 +1311,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Select conflicting constraints @@ -1320,12 +1320,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1333,12 +1333,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1346,12 +1346,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1359,12 +1359,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Επιλογή Οριζόντιου Άξονα - + Select the local horizontal axis of the sketch Επιλέξτε τον οριζόντιο άξονα του σχεδίου @@ -1372,8 +1372,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1381,12 +1381,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Επιλέξτε το τοπικό σημείο προέλευσης του σχεδίου @@ -1394,8 +1394,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Επιλέξτε μερικώς περιττούς περιορισμούς @@ -1403,8 +1403,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Επιλέξτε περιττούς περιορισμούς @@ -1412,12 +1412,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Select vertical axis - + Select the local vertical axis of the sketch Επιλέξτε τον κάθετο άξονα του σχεδίου @@ -1464,12 +1464,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Συμμετρία - + Creates symmetric geometry with respect to the last selected line or point Δημιουργεί συμμετρικό γεωμετρικό στοιχείο ως προς την τελευταία επιλεγμένη γραμμή ή το τελευταίο επιλεγμένο σημείο @@ -1477,12 +1477,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Ενεργοποιεί ή Απενεργοποιεί την κατάσταση λειτουργίας επεξεργασίας του επιλεγμένου αντικείμενου @@ -1503,12 +1503,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1596,54 +1596,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Προσθήκη περιορισμού 'Κλειδώματος' - + Add block constraint Προσθήκη περιορισμού kλειδώματος - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from vertical axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1652,8 +1652,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Add length constraint @@ -1775,159 +1775,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Προσθήκη κάθετου περιορισμού - + Add perpendicularity constraint Προσθήκη περιορισμού καθετότητας - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Προσθήκη περιορισμού διαμέτρου - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Προσθήκη περιορισμού νόμου Snell - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2098,47 +2098,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Αντιγραφή/κλωνοποίηση/μετακίνηση γεωμετρίας - + Create copy of geometry Create copy of geometry - + Delete all geometry Delete all geometry - + Delete All Constraints Διαγραφή Όλων των Περιορισμών - + Remove Axes Alignment Remove Axes Alignment @@ -2156,8 +2156,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Προσθήκη αυτόματων περιορισμών @@ -2172,22 +2172,22 @@ invalid constraints, degenerated geometry, etc. Μετονομασία περιορισμού σχεδίου - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag Constraint Drag Constraint - + Modify sketch constraints Τροποποίηση περιορισμών σχεδίου @@ -2226,6 +2226,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2331,16 +2336,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ invalid constraints, degenerated geometry, etc. Να μην πραγματοποιηθεί επισύναψη - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Λάθος επιλογή @@ -2631,8 +2635,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Διπλός περιορισμός @@ -2648,8 +2652,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Η επιλεγμένη ακμή έχει ήδη έναν περιορισμό! @@ -2661,7 +2665,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Επιλέξτε κορυφές από το σχέδιο. @@ -2686,29 +2690,29 @@ invalid constraints, degenerated geometry, etc. Δεν μπορεί να προστεθεί περιορισμός εάν το σχέδιο δεν έχει επιλυθεί ή υπάρχουν περιττοί και αντικρουόμενοι περιορισμοί. - + Select one edge from the sketch. Επιλέξτε μια ακμή από το σχέδιο. - + Select only edges from the sketch. Επιλέξτε μόνο ακμές από το σχέδιο. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Σφάλμα @@ -2723,75 +2727,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Εφαρμόστηκε περιορισμός επαφής μεταξύ άκρων εναλλακτικά. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Επιλέξτε ακριβώς μια γραμμή ή ένα σημείο και μια γραμμή ή δύο σημεία από το σχέδιο. - + Cannot add a length constraint on an axis! Αδύνατη η προσθήκη περιορισμού μήκους σε άξονα! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Επιλέξτε τα κατάλληλα στοιχεία από το σχέδιο. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2801,93 +2805,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Κανένα από τα επιλεγμένα σημεία δεν ήταν περιορισμένο πάνω στις αντίστοιχες καμπύλες, είτε επειδή είναι τμήματα του ίδιου στοιχείου, είτε επειδή ανήκουν και τα δύο στο ίδιο στοιχείο εξωτερικής γεωμετρίας. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Επιλέξτε ακριβώς μια γραμμή ή έως και δύο σημεία από το σχέδιο. - + Cannot add a horizontal length constraint on an axis! Αδύνατη η προσθήκη περιορισμού οριζόντιου μήκους σε άξονα! - + Cannot add a fixed x-coordinate constraint on the origin point! Αδυναμία προσθήκης σταθερού περιορισμού συντεταγμένων x στο σημείο αρχής! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Αδύνατη η προσθήκη κατακόρυφου μήκους σε άξονα! - + Cannot add a fixed y-coordinate constraint on the origin point! Δεν είναι δυνατή η προσθήκη ενός σταθερού περιορισμού συντεταγμένων y στο σημείο αρχής! - + Select two or more lines from the sketch. Επιλέξτε δύο ή περισσότερες γραμμές από το σχέδιο. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Επιλέξτε τουλάχιστον δύο γραμμές από το σχέδιο. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Αποδεκτοί συνδυασμοί: δύο καμπύλες· ένα αρχικό σημείο και μια καμπύλη· ένα αρχικό και ένα τελικό σημείο· δύο καμπύλες και ένα σημείο. - + Select some geometry from the sketch. perpendicular constraint Επιλέξτε γεωμετρικά στοιχεία από το σχέδιο. - - + + Cannot add a perpendicularity constraint at an unconnected point! Αδύνατη η προσθήκη περιορισμού καθετότητας σε ένα ασύνδετο σημείο! - - + + One of the selected edges should be a line. Μια από τις επιλεγμένες ακμές θα πρέπει να είναι γραμμή. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Εφαρμόστηκε περιορισμός επαφής μεταξύ άκρων. Ο περιορισμός ταύτισης διαγράφηκε. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Αποδεκτοί συνδυασμοί: δύο καμπύλες· ένα αρχικό σημείο και μια καμπύλη· ένα αρχικό και ένα τελικό σημείο· δύο καμπύλες και ένα σημείο. - + Select some geometry from the sketch. tangent constraint Επιλέξτε γεωμετρικά στοιχεία από το σχέδιο. - - - + + + Cannot add a tangency constraint at an unconnected point! Αδύνατη η προσθήκη περιορισμού επαφής σε ένα ασύνδετο σημείο! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Λάθος αριθμός επιλεγμένων αντικειμένων! - - + + With 3 objects, there must be 2 curves and 1 point. Με 3 αντικείμενα, πρέπει να υπάρχουν 2 καμπύλες και 1 σημείο. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Επιλέξτε ένα ή περισσότερα τόξα ή κύκλους από το σχέδιο. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Επιλέξτε έναν ή περισσότερους πόλους B-Spline είτε ένα ή περισσότερα τόξα ή κύκλους από το σχέδιο, αλλά όχι ανάμεικτα. - - - + + + Constraint only applies to arcs or circles. Ο περιορισμός εφαρμόζεται μόνο σε τόξα ή κύκλους. - - + + Select one or two lines from the sketch. Or select two edges and a point. Επιλέξτε μια ή δύο γραμμές από το σχέδιο. Ή επιλέξτε δύο ακμές και ένα σημείο. @@ -3010,88 +3013,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Δεν δύναται να οριστεί γωνιακός περιορισμός για δύο παράλληλες γραμμές. - + Cannot add an angle constraint on an axis! Αδύνατη η προσθήκη γωνιακού περιορισμού σε άξονα! - + Select two edges from the sketch. Επιλέξτε δύο ακμές από το σχέδιο. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Οι άξονες σχεδίου δεν μπορούν να χρησιμοποιηθούν για περιορισμούς ισότητας. - + Equality for B-spline edge currently unsupported. Δεν υποστηρίζονται περιορισμοί ισότητας σε ακμές καμπύλης B-spline επί του παρόντος. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Επιλέξτε δύο σημεία και μια γραμμή συμμετρίας, δύο σημεία και ένα σημείο συμμετρίας ή μια γραμμή και ένα σημείο συμμετρίας από το σχέδιο. - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Αδύνατη η προσθήκη περιορισμού μεταξύ μιας γραμμής και του αρχικού ή του τελικού της σημείου! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Τα επιλεγμένα στοιχεία δεν είναι μόνο γεωμετρικά στοιχεία από το ίδιο σκαρίφημα. - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Επιλέξτε τους περιορισμούς από το σχέδιο. @@ -3113,9 +3116,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Σφάλμα Πυρήνα CAD @@ -3191,69 +3194,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Επιλέξτε στοιχεία από ένα σχέδιο. - + No constraint selected Δεν επιλέχθηκε κανένας περιορισμός - + At least one constraint must be selected Πρέπει να επιλεχθεί τουλάχιστον ένας περιορισμός - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Μια συμμετρική κατασκευή απαιτεί τουλάχιστον δύο γεωμετρικά στοιχεία, το τελευταίο εκ των οποίων θα είναι το στοιχείο αναφοράς για την κατασκευή της συμμετρίας. - + The last element must be a point or a line serving as reference for the symmetry construction. Το τελευταίο στοιχείο θα πρέπει να είναι ένα σημείο ή μια γραμμή αναφοράς για την κατασκευή της συμμετρίας. - - + + A copy requires at least one selected non-external geometric element Η δημιουργία αντιγράφου απαιτεί την ύπαρξη τουλάχιστον ενός επιλεγμένου στοιχείου μη εξωτερικής γεωμετρίας - + Delete All Geometry Διαγραφή Όλων των Γεωμετρικών Στοιχείων - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Διαγραφή Όλων των Περιορισμών - + Are you really sure you want to delete all the constraints? Are you really sure you want to delete all the constraints? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3334,6 +3337,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Μήκος: - + Refractive index ratio Δείκτης διάθλασης - + Ratio n2/n1: Λόγος n2/n1: @@ -4065,13 +4073,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Δημιουργία διάταξης + Create regular polygon + Δημιουργία κανονικού πολυγώνου - Number of Sides: - Αριθμός Πλευρών: + Number of sides: + Number of sides: @@ -5072,112 +5080,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Επεξεργασία σκίτσου - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Μη έγκυρο σχέδιο - + Do you want to open the sketch validation tool? Θέλετε να ανοίξετε το εργαλείο επικύρωσης σχεδίων; - + The sketch is invalid and cannot be edited. Το σχέδιο είναι μη έγκυρο και δε δύναται να υποστεί επεξεργασία. - + Please remove the following constraint: Παρακαλώ αφαιρέστε τον παρακάτω περιορισμό: - + Please remove at least one of the following constraints: Παρακαλώ αφαιρέστε τουλάχιστον έναν από τους παρακάτω περιορισμούς: - + Please remove the following redundant constraint: Παρακαλώ αφαιρέστε τον παρακάτω περιττό περιορισμό: - + Please remove the following redundant constraints: Παρακαλώ αφαιρέστε τους παρακάτω περιττούς περιορισμούς: - + The following constraint is partially redundant: Ο ακόλουθος περιορισμός είναι εν μέρει περιττός: - + The following constraints are partially redundant: Οι ακόλουθοι περιορισμοί είναι εν μέρει περιττοί: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Κενό σχέδιο - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Περιττοί περιορισμοί: - + Partially redundant: Εν μέρει περιττό: - + Solver failed to converge Solver failed to converge - + Under constrained: Υπό περιορισμούς: - + %n DoF(s) %n DoF(s) @@ -5185,7 +5193,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5256,8 +5264,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Δημιουργεί έναν κλώνο του γεωμετρικού στοιχείου λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -5265,17 +5273,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Κλωνοποιήστε - + Copy Αντιγραφή - + Move Μετακινήστε @@ -5283,8 +5291,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Όρισε τη σταθερή διάμετρο ενός κύκλου, ή ενός τόξου @@ -5292,8 +5300,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Καθορισμός της ακτίνας/διαμέτρου ενός κύκλου ή ενός τόξου @@ -5301,8 +5309,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Καθορισμός της ακτίνας ενός κύκλου ή ενός τόξου @@ -5310,8 +5318,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Δημιουργεί ένα απλό αντίγραφο του γεωμετρικού στοιχείου λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -5597,8 +5605,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Μετακινεί το γεωμετρικό στοιχείο λαμβάνοντας ως σημείο αναφοράς το τελευταίο επιλεγμένο σημείο @@ -5923,7 +5931,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6153,64 +6161,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Σφάλμα - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Μη έγκυρη επιλογή - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6220,18 +6229,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6271,8 +6280,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6328,16 +6337,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6372,9 +6382,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6428,6 +6438,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6627,12 +6642,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Περιορισμός ακτίνας - + Fix the radius of a circle or an arc Καθορισμός της ακτίνας ενός κύκλου ή ενός τόξου @@ -6749,12 +6764,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6887,12 +6902,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Περιορισμός ταύτισης - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6900,12 +6915,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7222,12 +7237,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7235,12 +7250,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7248,12 +7263,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7261,14 +7276,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts index ea61e48045..45a6b709b7 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringir arco o circunferencia - + Constrain an arc or a circle Restringe un arco o una circunferencia - + Constrain radius Restringir radio - + Constrain diameter Restringir diámetro - + Constrain auto radius/diameter Restricción automática de radio/diámetro @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Restringir ángulo - + Fix the angle of a line or the angle between two lines Fija el ángulo de una línea o el ángulo entre dos líneas @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restringir coincidencia - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Crea una restricción coincidente entre puntos, o una restricción concéntrica entre círculos, arcos y elipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringir diámetro - + Fix the diameter of a circle or an arc Fija el diámetro de una circunferencia o un arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restringir distancia - + Fix a length of a line or the distance between a line and a vertex or between two circles Fija una longitud de una línea o la distancia entre una línea y un vértice o entre dos círculos @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Restricción de distancia horizontal - + Fix the horizontal distance between two points or line ends Fija la distancia horizontal entre dos puntos o extremos de línea @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Restricción de distancia vertical - + Fix the vertical distance between two points or line ends Fija la distancia vertical entre dos puntos o extremos de línea @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restringir igualdad - + Create an equality constraint between two lines or between circles and arcs Crea una restricción de igualdad entre dos líneas o entre circunferencias y arcos @@ -520,12 +520,12 @@ en el vértice seleccionado CmdSketcherConstrainParallel - + Constrain parallel Restringir paralela - + Create a parallel constraint between two lines Crea una restricción paralela entre dos líneas @@ -533,12 +533,12 @@ en el vértice seleccionado CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restringir perpendicular - + Create a perpendicular constraint between two lines Crea una restricción perpendicular entre dos líneas @@ -546,12 +546,12 @@ en el vértice seleccionado CmdSketcherConstrainPointOnObject - + Constrain point onto object Restringir el punto al objeto - + Fix a point onto an object Fija un punto en un objeto @@ -559,12 +559,12 @@ en el vértice seleccionado CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Restricción automática de radio/diámetro - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Corrija el diámetro si se elige un círculo, o el radio si se elige un polo arco/curva @@ -572,12 +572,12 @@ en el vértice seleccionado CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Restricción de refracción (Ley de Snell) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Crea una restricción de ley de refracción (ley de Snell) entre dos extremos de los rayos @@ -587,12 +587,12 @@ y un borde como interfaz. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restringir simetría - + Create a symmetry constraint between two points with respect to a line or a third point Crea una restricción de simetría entre dos puntos @@ -602,12 +602,12 @@ con respecto a una línea o un tercer punto CmdSketcherConstrainTangent - + Constrain tangent Restringir tangente - + Create a tangent constraint between two entities Crea una restricción tangente entre dos entidades @@ -641,12 +641,12 @@ con respecto a una línea o un tercer punto CmdSketcherCopy - + Copy Copiar - + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia simple de la geometría tomando como referencia el último punto seleccionado @@ -1031,12 +1031,12 @@ con respecto a una línea o un tercer punto CmdSketcherDeleteAllConstraints - + Delete all constraints Borrar todas las restricciones - + Delete all constraints in the sketch Borra todas las restricciones en el croquis @@ -1044,12 +1044,12 @@ con respecto a una línea o un tercer punto CmdSketcherDeleteAllGeometry - + Delete all geometry Borrar toda la geometría - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Borra todas las restricciones y geometría del croquis actual, con la excepción de la geometría externa @@ -1232,12 +1232,12 @@ como referencia replicadora. CmdSketcherMove - + Move Mover - + Moves the geometry taking as reference the last selected point Mueve la geometría tomando como referencia el último punto seleccionado @@ -1258,12 +1258,12 @@ como referencia replicadora. CmdSketcherRectangularArray - + Rectangular array Matriz rectangular - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Crea un patrón de matriz rectangular de la geometría tomando como referencia el último punto seleccionado @@ -1271,12 +1271,12 @@ como referencia replicadora. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Eliminar alineación de ejes - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica restricciones para eliminar la alineación de los ejes mientras se intenta preservar la relación de restricción de la selección @@ -1299,12 +1299,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostrar/ocultar geometría interna - + Show all internal geometry or hide unused internal geometry Muestra toda la geometría interna u oculta geometría interna no utilizada @@ -1312,8 +1312,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Seleccionar restricciones en conflicto @@ -1321,12 +1321,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectConstraints - + Select associated constraints Seleccionar restricciones asociadas - + Select the constraints associated with the selected geometrical elements Selecciona las restricciones asociadas con los elementos geométricos seleccionados @@ -1334,12 +1334,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Seleccionar geometría asociada - + Select the geometrical elements associated with the selected constraints Selecciona los elementos geométricos asociados con las restricciones seleccionadas @@ -1347,12 +1347,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Seleccionar Grados de Libertad sin restricciones - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Selecciona elementos geométricos donde el solver todavía detecta grados de libertad sin restricciones. @@ -1360,12 +1360,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Seleccionar eje horizontal - + Select the local horizontal axis of the sketch Seleccione la abscisa local del croquis @@ -1373,8 +1373,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Seleccionar restricciones mal formadas @@ -1382,12 +1382,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectOrigin - + Select origin Seleccionar origen de coordenadas - + Select the local origin point of the sketch Selecciones el origen local del croquis @@ -1395,8 +1395,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Seleccionar restricciones parcialmente redundantes @@ -1404,8 +1404,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Seleccionar restricciones redundantes @@ -1413,12 +1413,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectVerticalAxis - + Select vertical axis Seleccionar eje vertical - + Select the local vertical axis of the sketch Seleccione la ordenada del croquis @@ -1465,12 +1465,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSymmetry - + Symmetry Simetría - + Creates symmetric geometry with respect to the last selected line or point Crea geometría simétrica con respecto a la última línea o punto seleccionado @@ -1478,12 +1478,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activar/desactivar restricción - + Activates or deactivates the selected constraints Activa o desactiva las restricciones seleccionadas @@ -1504,12 +1504,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Alterna las restricciones entre operativas o de referencia - + Set the toolbar, or the selected constraints, into driving or reference mode Fija la barra de herramientas, o las restricciones seleccionadas, @@ -1598,54 +1598,54 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción fija - + Add 'Block' constraint Añadir restricción 'Bloqueo' - + Add block constraint Añadir restricción de bloqueo - - + + Add coincident constraint Añadir restricción coincidente - - + + Add distance from horizontal axis constraint Añadir distancia desde la restricción del eje horizontal - - + + Add distance from vertical axis constraint Añadir distancia desde la restricción del eje vertical - - + + Add point to point distance constraint Añadir punto a restricción de distancia de punto - - + + Add point to line Distance constraint Añadir punto a restricción de Distancia de Línea - - + + Add circle to circle distance constraint Agrega un círculo a la restricción de distancia circular - + Add circle to line distance constraint Agrega un círculo a la restricción de distancia de línea @@ -1654,8 +1654,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + Add length constraint Añadir restricción de longitud @@ -1777,159 +1777,159 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción de distancia Y - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Añadir punto a la restricción del objeto - - + + Add point to point horizontal distance constraint Añadir punto a la restricción de distancia horizontal del punto - + Add fixed x-coordinate constraint Añadir restricción de coordenada-x fija - - + + Add point to point vertical distance constraint Añadir punto a la restricción de distancia vertical del punto - + Add fixed y-coordinate constraint Añadir restricción de coordenada-y fija - - + + Add parallel constraint Añadir restricción paralela - - - - - - - + + + + + + + Add perpendicular constraint Añadir restricción perpendicular - + Add perpendicularity constraint Añadir restricción de perpendicularidad - + Swap coincident+tangency with ptp tangency Intercambia coincidencia + tangencia con la tangencia ptp - + Swap PointOnObject+tangency with point to curve tangency Intercambia Punto en Objeto+tangencia con tangencia de punto a curva - - - - - - - + + + + + + + Add tangent constraint Añadir restricción tangente - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Añadir punto de restricción tangente - - - - + + + + Add radius constraint Añadir restricción de radio - - - - + + + + Add diameter constraint Añadir restricción de diámetro - - - - + + + + Add radiam constraint Añadir restricción de radio - - - - + + + + Add angle constraint Añadir restricción de ángulo - - + + Add equality constraint Añadir restricción de igualdad - - - - - + + + + + Add symmetric constraint Añadir restricción de simetría - + Add Snell's law constraint Añadir restricción de ley de Snell - + Toggle constraint to driving/reference Cambiar la restricción a la conducción/referencia - + Activate/Deactivate constraint Activar/desactivar restricción @@ -2100,47 +2100,47 @@ restricciones inválidas, geometrías degeneradas, etc. Unir curvas - + Cut in Sketcher - Cut in Sketcher + Cortar en croquizador - + Paste in Sketcher - Paste in Sketcher + Pegar en croquizador - + Exposing Internal Geometry Exponiendo Geometría Interna - + Create symmetric geometry Crear geometría simétrica - + Copy/clone/move geometry Copiar/clonar/mover geometría - + Create copy of geometry Crear copia de geometría - + Delete all geometry Borrar toda la geometría - + Delete All Constraints Borrar Todas las Restricciones - + Remove Axes Alignment Quitar alineación de ejes @@ -2158,8 +2158,8 @@ restricciones inválidas, geometrías degeneradas, etc. Actualizar el espacio virtual de la restricción - + Add auto constraints Añadir restricciones automáticas @@ -2174,22 +2174,22 @@ restricciones inválidas, geometrías degeneradas, etc. Renombrar restricción de croquis - + Drag Point Punto de arrastre - + Drag Curve Arrastrar curva - + Drag Constraint Restricción de arrastre - + Modify sketch constraints Modificar restricciones de croquis @@ -2226,7 +2226,12 @@ restricciones inválidas, geometrías degeneradas, etc. Scale geometries - Scale geometries + Geometrías de escala + + + + Translate geometries + Translate geometries @@ -2332,16 +2337,16 @@ restricciones inválidas, geometrías degeneradas, etc. El nodo no puede ser insertado fuera del rango de parámetros de la B-Spline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2407,20 +2412,8 @@ restricciones inválidas, geometrías degeneradas, etc. No adjuntar - - - - - - - - - - - - @@ -2431,133 +2424,144 @@ restricciones inválidas, geometrías degeneradas, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selección Incorrecta @@ -2632,8 +2636,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + Double constraint Restricción doble @@ -2649,8 +2653,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + The selected edge already has a Block constraint! ¡El borde seleccionado ya tiene una restricción de Bloque! @@ -2662,7 +2666,7 @@ restricciones inválidas, geometrías degeneradas, etc. - + Select vertices from the sketch. Selecciona vértices del croquis. @@ -2687,29 +2691,29 @@ restricciones inválidas, geometrías degeneradas, etc. Una restricción de Bloqueo no puede ser añadida si el croquis está sin resolver o hay restricciones redundantes y en conflicto. - + Select one edge from the sketch. Seleccione un borde del croquis. - + Select only edges from the sketch. Seleccione solo bordes a partir del croquis. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 El número de objetos seleccionados no es 3 + - Error Error @@ -2724,75 +2728,75 @@ restricciones inválidas, geometrías degeneradas, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. En su lugar, se aplicó la tangencia de punto final a punto final. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleccione dos o más vértices del croquis para una restricción coincidente, o dos o más círculos, elipses, arcos o arcos de elípse para una restricción concéntrica. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleccione dos vértices del croquis para una restricción coincidente, o dos círculos, elipses, arcos o arcos de elipse para una restricción concéntrica. - + Select exactly one line or one point and one line or two points from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos del croquis. - + Cannot add a length constraint on an axis! ¡No se puede agregar una restricción de longitud en un eje! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos o dos círculos del croquis. - + This constraint does not make sense for non-linear curves. Esta restricción no tiene sentido para curvas no lineales. - + Endpoint to edge tangency was applied instead. El punto final a la tangencia del borde se aplicó en su lugar. - - - - - - + + + + + + Select the right things from the sketch. Seleccione las cosas correctas desde el croquis. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Seleccione un borde que no sea un peso de B-spline. @@ -2802,93 +2806,92 @@ restricciones inválidas, geometrías degeneradas, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Ninguno de los puntos seleccionados fueron restringidos en sus respectivas curvas, porque son partes del mismo elemento, y porque ambos son geometría externa, o porque la arista no es elegible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ninguno de los puntos seleccionados se restringió a las curvas respectivas, ya sea porque son partes del mismo elemento o porque ambos son geometría externa. - + Cannot add a length constraint on this selection! ¡No se puede agregar una restricción de longitud a esta selección! - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccione exactamente una línea o hasta dos puntos del croquis. - + Cannot add a horizontal length constraint on an axis! ¡No se puede agregar una restricción de longitud horizontal en un eje! - + Cannot add a fixed x-coordinate constraint on the origin point! ¡No se puede agregar una restricción fija de coordenadas X en el punto de origen! - - + + This constraint only makes sense on a line segment or a pair of points. Esta restricción sólo tiene sentido en un segmento de línea o un par de puntos. - + Cannot add a vertical length constraint on an axis! ¡No se puede agregar una restricción de longitud vertical sobre un eje! - + Cannot add a fixed y-coordinate constraint on the origin point! ¡No se puede agregar una restricción fija de coordenadas Y en el punto de origen! - + Select two or more lines from the sketch. Seleccione dos o más líneas del croquis. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Seleccione al menos dos líneas del croquis. - - Select a valid line. - Seleccione una línea válida. - - - - + The selected edge is not a valid line. El borde seleccionado no es una línea válida. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2898,35 +2901,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos finales; dos curvas y un punto. - + Select some geometry from the sketch. perpendicular constraint Seleccione alguna geometría del croquis. - - + + Cannot add a perpendicularity constraint at an unconnected point! ¡No se puede agregar una restricción de perpendicularidad en un punto desconectado! - - + + One of the selected edges should be a line. Uno de los bordes seleccionados debe ser una línea. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Se aplicó la tangencia de punto final a punto final. La restricción coincidente fue eliminada. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Se aplicó la restricción del punto final a la tangencia. Se eliminó la restricción del punto sobre el objeto. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2936,67 +2939,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos finales; dos curvas y un punto. - + Select some geometry from the sketch. tangent constraint Seleccione alguna geometría del croquis. - - - + + + Cannot add a tangency constraint at an unconnected point! ¡No se puede agregar una restricción de tangencia en un punto desconectado! - - + + Tangent constraint at B-spline knot is only supported with lines! La restricción tangente en nudo de B-spline sólo es compatible con líneas! - + B-spline knot to endpoint tangency was applied instead. En su lugar, se aplicó el punto de la B-spline al extremo de la tangencia. - - + + Wrong number of selected objects! ¡Número incorrecto de objetos seleccionados! - - + + With 3 objects, there must be 2 curves and 1 point. Con 3 objetos, debe haber 2 curvas y 1 punto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Seleccione uno o más arcos o circunferencias del croquis. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Seleccione sólo uno o más polos de B-Spline o sólo uno o más arcos o circunferencias del croquis, pero no mezclado. - - - + + + Constraint only applies to arcs or circles. La restricción sólo se aplica a los arcos o circunferencias. - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccione una o dos líneas del croquis. O seleccione dos bordes y un punto. @@ -3011,88 +3014,88 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina No se puede establecer una restricción de ángulo para dos líneas paralelas. - + Cannot add an angle constraint on an axis! ¡No se puede agregar una restricción de ángulo en un eje! - + Select two edges from the sketch. Seleccione dos bordes del croquis. - + Select two or more compatible edges. Seleccione dos o más bordes compatibles. - + Sketch axes cannot be used in equality constraints. Los ejes de dibujo no pueden utilizarse en restricciones de igualdad. - + Equality for B-spline edge currently unsupported. La igualdad para el borde de B-spline no está soportada actualmente. - - - + + + Select two or more edges of similar type. Seleccione dos o más bordes de tipo similar. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccione dos puntos y una línea de simetría, dos puntos y un punto de simetría o una línea y un punto de simetría del croquis. - - + + Cannot add a symmetry constraint between a line and its end points. No se puede añadir una restricción de simetría entre una línea y sus extremos. - - + + Cannot add a symmetry constraint between a line and its end points! ¡No se puede agregar una restricción de simetría entre una línea y sus puntos finales! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccione dos extremos de líneas para actuar como rayos, y una arista que representa un límite. El primer punto seleccionado corresponde al índice n1, segundo a n2, y el valor de referencia establece la relación n2/n1. - + Selected objects are not just geometry from one sketch. Los objetos seleccionados no son solo geometría de un croquis. - + Cannot create constraint with external geometry only. No se puede crear restricción sólo con geometría externa. - + Incompatible geometry is selected. Se ha seleccionado geometría incompatible. + - - - - + + + Select constraints from the sketch. Seleccione restricciones del croquis. @@ -3114,9 +3117,9 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Definir el grado de la B-Spline, entre 1 y %1: - + CAD Kernel Error Error de Kernel CAD @@ -3192,69 +3195,69 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Se deben seleccionar dos puntos finales, o un punto coincidente. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Seleccione los elementos de un único croquis. - + No constraint selected Ninguna restricción seleccionada - + At least one constraint must be selected Debe seleccionar al menos una restricción - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Una construcción simétrica requiere al menos dos elementos geométricos, siendo el último elemento geométrico la referencia para la construcción de simetría. - + The last element must be a point or a line serving as reference for the symmetry construction. El último elemento debe ser un punto o una línea que sirva de referencia para la construcción de simetría. - - + + A copy requires at least one selected non-external geometric element Una copia requiere al menos un elemento geométrico no externo seleccionado - + Delete All Geometry Borrar Toda Geometría - + Are you really sure you want to delete all geometry and constraints? ¿Está seguro de que desea eliminar todas las restricciones y geometrías? - + Delete All Constraints Borrar Todas las Restricciones - + Are you really sure you want to delete all the constraints? ¿Está realmente seguro de que desea eliminar todas las restricciones? - + Removal of axes alignment requires at least one selected non-external geometric element La eliminación de alineación de ejes requiere al menos un elemento geométrico no externo seleccionado @@ -3333,7 +3336,12 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Scale parameters - Scale parameters + Parámetros de escala + + + + Translate parameters + Translate parameters @@ -3645,12 +3653,12 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Longitud: - + Refractive index ratio Índice de refracción - + Ratio n2/n1: Relación n2/n1: @@ -4065,13 +4073,13 @@ reflejado en copias SketcherGui::SketcherRegularPolygonDialog - Create array - Crear matriz + Create regular polygon + Crear polígono regular - Number of Sides: - Número de Lados: + Number of sides: + Number of sides: @@ -5075,112 +5083,112 @@ Esto se hace al analizar las geometrías y restricciones del croquis. SketcherGui::ViewProviderSketch - + Edit sketch Editar croquis - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + Do you want to close this dialog? ¿Desea cerrar este diálogo? - + Invalid sketch Croquis no válido - + Do you want to open the sketch validation tool? ¿Quieres abrir la herramienta de validación de croquis? - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + Please remove the following constraint: Por favor, elimine la siguiente restricción: - + Please remove at least one of the following constraints: Por favor, elimine al menos una de las siguientes restricciones: - + Please remove the following redundant constraint: Por favor, elimine la siguiente restricción redundante: - + Please remove the following redundant constraints: Por favor, elimine las siguientes restricciones redundantes: - + The following constraint is partially redundant: La siguiente restricción es parcialmente redundante: - + The following constraints are partially redundant: Las siguientes restricciones son parcialmente redundantes: - + Please remove the following malformed constraint: Por favor, elimine la siguiente restricción mal formada: - + Please remove the following malformed constraints: Por favor, elimine las siguientes restricciones mal formadas: - + Empty sketch Croquis vacío - + Over-constrained: Sobre-restringido: - + Malformed constraints: Restricciones mal formadas: - + Redundant constraints: Restricciones redundantes: - + Partially redundant: Parcialmente redundante: - + Solver failed to converge El solver falló al converger - + Under constrained: Sub-restringido: - + %n DoF(s) %n DoF @@ -5188,7 +5196,7 @@ Esto se hace al analizar las geometrías y restricciones del croquis. - + Fully constrained Totalmente restringido @@ -5259,8 +5267,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -5268,17 +5276,17 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_CompCopy - + Clone Clonar - + Copy Copiar - + Move Mover @@ -5286,8 +5294,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fija el diámetro de una circunferencia o un arco @@ -5295,8 +5303,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fija el diámetro/radio de una circunferencia o de un arco @@ -5304,8 +5312,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fija el radio de una circunferencia o arco @@ -5313,8 +5321,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia simple de la geometría tomando como referencia el último punto seleccionado @@ -5599,8 +5607,8 @@ Seleccione el método para adjuntar este croquis a los objetos seleccionados. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mueve la geometría tomando como referencia el último punto seleccionado @@ -5925,7 +5933,7 @@ El algoritmo QR de Eigen Sparse está optimizado para matrices dispersas; genera ViewProviderSketch - + and %1 more y %1 más @@ -6155,64 +6163,65 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Error - + Failed to delete all geometry Fallo al eliminar toda la geometría - + Failed to delete all constraints Fallo al eliminar todas las restricciones - - + + Invalid selection Selección inválida - + Selection has no valid geometries. La selección no tiene geometrías válidas. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6222,18 +6231,18 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< La restricción tiene información de índice inválida y está mal formada. - - - - - - - + + + + + + + Invalid Constraint Restricción inválida @@ -6273,8 +6282,8 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Error al crear el polo de B-Spline - + Error creating B-spline Error al crear B-spline @@ -6330,16 +6339,17 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Fallo al añadir línea - - - - - - - - + + + + + + + + + Tool execution aborted Se interrumpió la ejecución de la herramienta @@ -6374,9 +6384,9 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Fallo al recortar arista + - Value Error Error del valor @@ -6430,6 +6440,11 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6629,12 +6644,12 @@ Al hacer clic izquierdo en el espacio vacío validará la restricción actual. A CmdSketcherConstrainRadius - + Constrain radius Restringir radio - + Fix the radius of a circle or an arc Fija el radio de una circunferencia o arco @@ -6751,12 +6766,12 @@ Al hacer clic izquierdo en el espacio vacío validará la restricción actual. A CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6889,12 +6904,12 @@ Al hacer clic izquierdo en el espacio vacío validará la restricción actual. A CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restringir coincidencia - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Crea una restricción coincidente entre puntos, o fija un punto en un borde, o una restricción concéntrica entre círculos, arcos y elipses @@ -6902,12 +6917,12 @@ Al hacer clic izquierdo en el espacio vacío validará la restricción actual. A CmdSketcherRotate - + Polar transform Transformación polar - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotar geometrías seleccionadas, haciendo n copias, permite la creación de patrones circulares. @@ -7224,53 +7239,95 @@ Al hacer clic izquierdo en el espacio vacío validará la restricción actual. A CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + Copiar en croquis - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Copia las geometrías y restricciones seleccionadas al portapapeles CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + Cortar en croquis - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Corta las geometrías y restricciones seleccionadas al portapapeles CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + Pegar en croquis - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Pega las geometrías y restricciones seleccionadas del portapapeles CmdSketcherScale - + Scale transform - Scale transform + Transformación de escala - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Escala las geometrias seleccionadas. Después de seleccionar el punto central puede introducir el factor de escala, o seleccionar dos puntos de referencia y a continuación: escala factor = longitud(p2-centro) / longitud(p1-center). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index e7681eea42..67f818e633 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringir arco o circunferencia - + Constrain an arc or a circle Restringir un arco o una circunferencia - + Constrain radius Restringir radio - + Constrain diameter Restringir diámetro - + Constrain auto radius/diameter Restricción automática de radio/diámetro @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Restringir ángulo - + Fix the angle of a line or the angle between two lines Fijar el ángulo de una línea o el ángulo entre dos líneas @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restricción de coincidencia - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Crea una restricción coincidente entre puntos, o una restricción concéntrica entre círculos, arcos y elipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringir diámetro - + Fix the diameter of a circle or an arc Fijar el diámetro de una circunferencia o un arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restricción de distancia - + Fix a length of a line or the distance between a line and a vertex or between two circles Fija una longitud de una línea o la distancia entre una línea y un vértice o entre dos círculos @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Restricción de distancia horizontal - + Fix the horizontal distance between two points or line ends Fijar la distancia horizontal entre dos puntos o extremos de línea @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Restricción de distancia vertical - + Fix the vertical distance between two points or line ends Fijar la distancia vertical entre dos puntos o extremos de línea @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restringir igualdad - + Create an equality constraint between two lines or between circles and arcs Crear una restricción de igualdad entre dos líneas o entre circunferencias y arcos @@ -520,12 +520,12 @@ en el vértice seleccionado CmdSketcherConstrainParallel - + Constrain parallel Restricción de paralelismo - + Create a parallel constraint between two lines Crear una restricción entre dos líneas paralelas @@ -533,12 +533,12 @@ en el vértice seleccionado CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restricción perpendicular - + Create a perpendicular constraint between two lines Crear una restricción perpendicular entre dos líneas @@ -546,12 +546,12 @@ en el vértice seleccionado CmdSketcherConstrainPointOnObject - + Constrain point onto object Restringir punto en objeto - + Fix a point onto an object Fijar un punto sobre un objeto @@ -559,12 +559,12 @@ en el vértice seleccionado CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Restricción automática de radio/diámetro - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Corrija el diámetro si se elige un círculo, o el radio si se elige un polo arco/curva @@ -572,12 +572,12 @@ en el vértice seleccionado CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Restricción de refracción (Ley de Snell) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Crea una restricción de ley de refracción (ley de Snell) entre dos extremos de los rayos y una arista como interfaz. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restricción de simetría - + Create a symmetry constraint between two points with respect to a line or a third point Crear una restricción de simetría entre dos puntos @@ -601,12 +601,12 @@ con respecto a una línea o un tercer punto CmdSketcherConstrainTangent - + Constrain tangent Restricción tangencial - + Create a tangent constraint between two entities Crear una restricción tangencial entre dos entidades @@ -640,12 +640,12 @@ con respecto a una línea o un tercer punto CmdSketcherCopy - + Copy Copiar - + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia simple de la geometría tomando como referencia el último punto seleccionado @@ -1030,12 +1030,12 @@ con respecto a una línea o un tercer punto CmdSketcherDeleteAllConstraints - + Delete all constraints Borrar todas las restricciones - + Delete all constraints in the sketch Eliminar todas las restricciones en el croquis @@ -1043,12 +1043,12 @@ con respecto a una línea o un tercer punto CmdSketcherDeleteAllGeometry - + Delete all geometry Eliminar toda la geometría - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Borrar todas las restricciones y geometría del croquis actual, con la excepción de la geometría externa @@ -1231,12 +1231,12 @@ como referencia replicadora. CmdSketcherMove - + Move Mover - + Moves the geometry taking as reference the last selected point Mover la geometría tomando como referencia el último punto seleccionado @@ -1257,12 +1257,12 @@ como referencia replicadora. CmdSketcherRectangularArray - + Rectangular array Matriz rectangular - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Crea un patrón de matriz rectangular de la geometría, tomando como referencia el último punto seleccionado @@ -1270,12 +1270,12 @@ como referencia replicadora. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remover alineación de ejes - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica restricciones para remover la alineación de los ejes mientras se intenta preservar la relación de restricción de la selección @@ -1298,12 +1298,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostrar/ocultar geometrías internas - + Show all internal geometry or hide unused internal geometry Mostrar toda la geometría interna u ocultar geometría interna no utilizada @@ -1311,8 +1311,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Seleccionar restricciones en conflicto @@ -1320,12 +1320,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectConstraints - + Select associated constraints Seleccionar restricciones asociadas - + Select the constraints associated with the selected geometrical elements Seleccione las restricciones asociadas con los elementos geometricos seleccionados @@ -1333,12 +1333,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Seleccionar geometría asociada - + Select the geometrical elements associated with the selected constraints Seleccione los elementos geometricos asociados con las restricciones seleccionadas @@ -1346,12 +1346,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Seleccionar Grados de Libertad sin restricciones - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Seleccione elementos geométricos donde el solver todavía detecta grados de libertad sin restricciones. @@ -1359,12 +1359,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Seleccionar eje horizontal - + Select the local horizontal axis of the sketch Seleccione el eje horizontal local del croquis @@ -1372,8 +1372,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Seleccionar restricciones mal formadas @@ -1381,12 +1381,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectOrigin - + Select origin Seleccionar origen - + Select the local origin point of the sketch Seleccione el punto de origen local del croquis @@ -1394,8 +1394,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Seleccionar restricciones parcialmente redundantes @@ -1403,8 +1403,8 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Seleccionar restricciones redundantes @@ -1412,12 +1412,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSelectVerticalAxis - + Select vertical axis Seleccionar eje vertical - + Select the local vertical axis of the sketch Seleccione el eje vertical local del croquis @@ -1464,12 +1464,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherSymmetry - + Symmetry Simetría - + Creates symmetric geometry with respect to the last selected line or point Crea una geometría simétrica con respecto a la última línea o punto seleccionados @@ -1477,12 +1477,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activar/desactivar restricción - + Activates or deactivates the selected constraints Activa o desactiva las restricciones seleccionadas @@ -1503,12 +1503,12 @@ Esto borrará la propiedad 'Soporte', si la hubiera. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Alternar restricción/referencia - + Set the toolbar, or the selected constraints, into driving or reference mode Establece la barra de herramientas, o las restricciones seleccionadas, @@ -1597,54 +1597,54 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción fija - + Add 'Block' constraint Añadir restricción 'Bloqueo' - + Add block constraint Añadir restricción de bloqueo - - + + Add coincident constraint Añadir restricción de coincidencia - - + + Add distance from horizontal axis constraint Añadir distancia desde la restricción del eje horizontal - - + + Add distance from vertical axis constraint Añadir distancia desde la restricción del eje vertical - - + + Add point to point distance constraint Añadir punto a restricción de distancia de punto - - + + Add point to line Distance constraint Añadir punto a restricción de Distancia de Línea - - + + Add circle to circle distance constraint Agrega un círculo a la restricción de distancia circular - + Add circle to line distance constraint Agrega un círculo a la restricción de distancia de línea @@ -1653,8 +1653,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + Add length constraint Añadir restricción de longitud @@ -1776,159 +1776,159 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción de distancia Y - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Añadir punto a la restricción del objeto - - + + Add point to point horizontal distance constraint Añadir punto a la restricción de distancia horizontal del punto - + Add fixed x-coordinate constraint Añadir restricción de coordenada-x fija - - + + Add point to point vertical distance constraint Añadir punto a la restricción de distancia vertical del punto - + Add fixed y-coordinate constraint Añadir restricción de coordenada-y fija - - + + Add parallel constraint Añadir restricción paralela - - - - - - - + + + + + + + Add perpendicular constraint Añadir restricción perpendicular - + Add perpendicularity constraint Añadir restricción de perpendicularidad - + Swap coincident+tangency with ptp tangency Intercambia coincidencia + tangencia con la tangencia ptp - + Swap PointOnObject+tangency with point to curve tangency Intercambia Punto en Objeto+tangencia con tangencia de punto a curva - - - - - - - + + + + + + + Add tangent constraint Añadir restricción tangente - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Añadir punto de restricción tangente - - - - + + + + Add radius constraint Añadir restricción de radio - - - - + + + + Add diameter constraint Añadir restricción de diámetro - - - - + + + + Add radiam constraint Añadir restricción radiam - - - - + + + + Add angle constraint Añadir restricción de ángulo - - + + Add equality constraint Añadir restricción de igualdad - - - - - + + + + + Add symmetric constraint Añadir restricción de simetría - + Add Snell's law constraint Añadir restricción de ley de Snell - + Toggle constraint to driving/reference Cambiar la restricción a la conducción/referencia - + Activate/Deactivate constraint Activar/desactivar restricción @@ -2099,47 +2099,47 @@ restricciones inválidas, geometrías degeneradas, etc. Unir curvas - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exponiendo Geometría Interna - + Create symmetric geometry Crear geometría simétrica - + Copy/clone/move geometry Copiar/clonar/mover geometría - + Create copy of geometry Crear copia de geometría - + Delete all geometry Eliminar toda la geometría - + Delete All Constraints Eliminar todas las restricciones - + Remove Axes Alignment Quitar alineación de ejes @@ -2157,8 +2157,8 @@ restricciones inválidas, geometrías degeneradas, etc. Actualizar el espacio virtual de la restricción - + Add auto constraints Añadir restricciones automáticas @@ -2173,22 +2173,22 @@ restricciones inválidas, geometrías degeneradas, etc. Renombrar restricción de croquis - + Drag Point Punto de arrastre - + Drag Curve Arrastrar curva - + Drag Constraint Restricción de arrastre - + Modify sketch constraints Modificar restricciones de croquis @@ -2227,6 +2227,11 @@ restricciones inválidas, geometrías degeneradas, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2331,16 +2336,16 @@ restricciones inválidas, geometrías degeneradas, etc. El nodo no puede ser insertado fuera del rango de parámetros de la B-Spline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ restricciones inválidas, geometrías degeneradas, etc. No adjuntar - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ restricciones inválidas, geometrías degeneradas, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selección incorrecta @@ -2631,8 +2635,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + Double constraint Restricción doble @@ -2648,8 +2652,8 @@ restricciones inválidas, geometrías degeneradas, etc. - - + + The selected edge already has a Block constraint! ¡La arista seleccionada ya tiene una restricción de Bloque! @@ -2661,7 +2665,7 @@ restricciones inválidas, geometrías degeneradas, etc. - + Select vertices from the sketch. Selecciona vértices del croquis. @@ -2686,29 +2690,29 @@ restricciones inválidas, geometrías degeneradas, etc. Una restricción de Bloqueo no puede ser añadida si el croquis está sin resolver o hay restricciones redundantes y en conflicto. - + Select one edge from the sketch. Seleccione una arista del croquis. - + Select only edges from the sketch. Seleccione únicamente aristas de el Croquis. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 El número de objetos seleccionados no es 3 + - Error Error @@ -2723,75 +2727,75 @@ restricciones inválidas, geometrías degeneradas, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Una Tangente de Puntos de Extremo se aplicó en su lugar. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleccione dos o más vértices del croquis para una restricción coincidente, o dos o más círculos, elipses, arcos o arcos de elípse para una restricción concéntrica. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleccione dos vértices del croquis para una restricción coincidente, o dos círculos, elipses, arcos o arcos de elipse para una restricción concéntrica. - + Select exactly one line or one point and one line or two points from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos del croquis. - + Cannot add a length constraint on an axis! ¡No se puede añadir una restricción de longitud en un eje! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos o dos círculos del croquis. - + This constraint does not make sense for non-linear curves. Esta restricción no tiene sentido para curvas no lineales. - + Endpoint to edge tangency was applied instead. El punto final a la tangencia del borde se aplicó en su lugar. - - - - - - + + + + + + Select the right things from the sketch. Seleccione las cosas correctas desde el croquis. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Seleccione un borde que no sea un peso de B-spline. @@ -2801,93 +2805,92 @@ restricciones inválidas, geometrías degeneradas, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Ninguno de los puntos seleccionados fueron restringidos en sus respectivas curvas, porque son partes del mismo elemento, y porque ambos son geometría externa, o porque la arista no es elegible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ninguno de los puntos seleccionados fueron limitados en las curvas respectivas, porque son partes de un mismo elemento, o porque son ambos de geometría externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccione exactamente una línea o hasta dos puntos del croquis. - + Cannot add a horizontal length constraint on an axis! ¡No se puede añadir una restricción de longitud horizontal en un eje! - + Cannot add a fixed x-coordinate constraint on the origin point! ¡No se puede agregar una restricción de coordenada x fija en el punto de origen! - - + + This constraint only makes sense on a line segment or a pair of points. Esta restricción sólo tiene sentido en un segmento de línea o un par de puntos. - + Cannot add a vertical length constraint on an axis! ¡No se puede añadir una restricción de longitud vertical sobre un eje! - + Cannot add a fixed y-coordinate constraint on the origin point! ¡No se puede agregar una restricción de coordenada y fija en el punto de origen! - + Select two or more lines from the sketch. Seleccione dos o más líneas del croquis. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Seleccione al menos dos líneas del croquis. - - Select a valid line. - Seleccione una línea válida. - - - - + The selected edge is not a valid line. El borde seleccionado no es una línea válida. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2896,35 +2899,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Las combinaciones posibles son: dos curvas; extremo y curva; dos extremos; dos curvas y un punto. - + Select some geometry from the sketch. perpendicular constraint Seleccione alguna geometría del croquis. - - + + Cannot add a perpendicularity constraint at an unconnected point! ¡No se puede añadir una restricción de perpendicularidad en un punto no conectado! - - + + One of the selected edges should be a line. ¡Una de las aristas seleccionadas debe ser una línea. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Una Tangente de Puntos de Estremo fue aplicada, La restricción coincidente fue eliminada. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Se aplicó un punto final al borde tangencial. Se eliminó el punto sobre la restricción del objeto. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2934,67 +2937,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos curvas y un punto. - + Select some geometry from the sketch. tangent constraint Seleccione alguna geometría del croquis. - - - + + + Cannot add a tangency constraint at an unconnected point! ¡No se puede añadir una restricción de tangencia en un punto no conectado! - - + + Tangent constraint at B-spline knot is only supported with lines! La restricción tangente en nudo de B-spline sólo es compatible con líneas! - + B-spline knot to endpoint tangency was applied instead. En su lugar, se aplicó tangecia entre el nudo de B-spline y el punto final. - - + + Wrong number of selected objects! ¡Número incorrecto de objetos seleccionados! - - + + With 3 objects, there must be 2 curves and 1 point. Con 3 objetos, debe haber 2 curvas y 1 punto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Seleccione uno o más arcos o circunferencias del croquis. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Seleccione sólo uno o más polos de B-Spline o sólo uno o más arcos o circunferencias del croquis, pero no mezclado. - - - + + + Constraint only applies to arcs or circles. La restricción sólo se aplica a los arcos o circunferencias. - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccione una o dos líneas del croquis. O seleccione un punto y dos aristas. @@ -3009,88 +3012,88 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Una restricción de ángulo no puede ser establecida por dos lineas paralelas. - + Cannot add an angle constraint on an axis! ¡No se puede añadir una restricción angular en un eje! - + Select two edges from the sketch. Seleccione dos aristas del croquis. - + Select two or more compatible edges. Seleccione dos o más bordes compatibles. - + Sketch axes cannot be used in equality constraints. Los ejes de dibujo no pueden utilizarse en restricciones de igualdad. - + Equality for B-spline edge currently unsupported. Igualdad para arista de B-Spline no compatible por el momento. - - - + + + Select two or more edges of similar type. Seleccione dos o más bordes de tipo similar. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccione dos puntos y una línea de simetría, dos puntos y un punto de simetría o una línea y un punto de simetría del croquis. - - + + Cannot add a symmetry constraint between a line and its end points. No se puede añadir una restricción de simetría entre una línea y sus extremos. - - + + Cannot add a symmetry constraint between a line and its end points! ¡No se puede añadir una restricción de simetría entre una línea y sus extremos! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Seleccione dos extremos de líneas para actuar como rayos, y una arista que representa un límite. El primer punto seleccionado corresponde al índice n1, segundo a n2, y el valor de referencia establece la relación n2/n1. - + Selected objects are not just geometry from one sketch. Los objetos seleccionados no son sólo la geometría de un croquis. - + Cannot create constraint with external geometry only. No se puede crear restricción sólo con geometría externa. - + Incompatible geometry is selected. Se ha seleccionado geometría incompatible. + - - - - + + + Select constraints from the sketch. Seleccione restricciones del croquis. @@ -3112,9 +3115,9 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Definir el grado de la B-Spline, entre 1 y %1: - + CAD Kernel Error Error del Kernel CAD @@ -3190,69 +3193,69 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Se deben seleccionar dos puntos finales, o un punto coincidente. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Seleccione los elementos de un único croquis. - + No constraint selected Ninguna restricción seleccionada - + At least one constraint must be selected Se debe seleccionar al menos una restricción - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Una construcción simétrica requiere al menos dos elementos geométricos, el último elemento geométrico siendo la referencia para la construcción de la simetría. - + The last element must be a point or a line serving as reference for the symmetry construction. El último elemento debe ser un punto o una línea que sirva como referencia para la construcción de la simetría. - - + + A copy requires at least one selected non-external geometric element Una copia requiere al menos seleccionar un elemento geométrico no externo - + Delete All Geometry Borrar Toda Geometría - + Are you really sure you want to delete all geometry and constraints? ¿Está seguro de que desea eliminar todas las geometrías y restricciones? - + Delete All Constraints Eliminar todas las restricciones - + Are you really sure you want to delete all the constraints? ¿Es realmente seguro que desea eliminar todas las restricciones? - + Removal of axes alignment requires at least one selected non-external geometric element La eliminación de alineación de ejes requiere al menos un elemento geométrico no externo seleccionado @@ -3333,6 +3336,11 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3643,12 +3651,12 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Longitud: - + Refractive index ratio Índice refracción - + Ratio n2/n1: Razón n2/n1: @@ -4061,13 +4069,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Crear matriz + Create regular polygon + Crear polígono regular - Number of Sides: - Número de lados: + Number of sides: + Number of sides: @@ -5071,112 +5079,112 @@ Esto se hace al analizar las geometrías y restricciones del croquis. SketcherGui::ViewProviderSketch - + Edit sketch Editar croquis - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + Do you want to close this dialog? ¿Desea cerrar este diálogo? - + Invalid sketch Croquis inválido - + Do you want to open the sketch validation tool? ¿Desea abrir la herramienta de validación del croquis? - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + Please remove the following constraint: Elimine la siguiente restricción: - + Please remove at least one of the following constraints: Por favor elimine al menos una de las siguientes restricciones: - + Please remove the following redundant constraint: Por favor elimine la siguiente restricción redundante: - + Please remove the following redundant constraints: Por favor elimine las siguientes restricciones redundante: - + The following constraint is partially redundant: La siguiente restricción es parcialmente redundante: - + The following constraints are partially redundant: Las siguientes restricciones son parcialmente redundantes: - + Please remove the following malformed constraint: Por favor, elimine la siguiente restricción mal formada: - + Please remove the following malformed constraints: Por favor, elimine las siguientes restricciones mal formadas: - + Empty sketch Croquis vacío - + Over-constrained: Sobre-restringido: - + Malformed constraints: Restricciones mal formadas: - + Redundant constraints: Restricciones redundantes: - + Partially redundant: Parcialmente redundante: - + Solver failed to converge El solver falló al converger - + Under constrained: Sub-restringido: - + %n DoF(s) %n DoF @@ -5184,7 +5192,7 @@ Esto se hace al analizar las geometrías y restricciones del croquis. - + Fully constrained Totalmente restringido @@ -5255,8 +5263,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometría tomando como referencia el último punto seleccionado @@ -5264,17 +5272,17 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_CompCopy - + Clone Clonar - + Copy Copiar - + Move Mover @@ -5282,8 +5290,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fijar el diámetro de una circunferencia o un arco @@ -5291,8 +5299,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fijar el diámetro/radio de una circunferencia o un arco @@ -5300,8 +5308,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fijar el radio de una circunferencia o arco @@ -5309,8 +5317,8 @@ Esto se hace al analizar las geometrías y restricciones del croquis. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia simple de la geometría tomando como referencia el último punto seleccionado @@ -5595,8 +5603,8 @@ Seleccione el método para adjuntar este croquis a los objetos seleccionados. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mover la geometría tomando como referencia el último punto seleccionado @@ -5921,7 +5929,7 @@ El algoritmo QR de Eigen Sparse está optimizado para matrices dispersas; genera ViewProviderSketch - + and %1 more y %1 más @@ -6151,64 +6159,65 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Error - + Failed to delete all geometry Fallo al eliminar toda la geometría - + Failed to delete all constraints Fallo al eliminar todas las restricciones - - + + Invalid selection Selección inválida - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6218,18 +6227,18 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< La restricción tiene información de índice inválida y está mal formada. - - - - - - - + + + + + + + Invalid Constraint Restricción inválida @@ -6269,8 +6278,8 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Error al crear el polo de B-Spline - + Error creating B-spline Error al crear B-Spline @@ -6326,16 +6335,17 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Fallo al añadir línea - - - - - - - - + + + + + + + + + Tool execution aborted Se interrumpió la ejecución de la herramienta @@ -6370,9 +6380,9 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Fallo al recortar arista + - Value Error Error del valor @@ -6426,6 +6436,11 @@ El espaciado de la cuadrícula cambia si es menor que este número de píxeles.< Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6625,12 +6640,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Restringir radio - + Fix the radius of a circle or an arc Fijar el radio de una circunferencia o arco @@ -6747,12 +6762,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6885,12 +6900,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restricción de coincidencia - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6898,12 +6913,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7220,12 +7235,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7233,12 +7248,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7246,12 +7261,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7259,14 +7274,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index 3e5bee3001..3f4e37727b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klonatu - + Creates a clone of the geometry taking as reference the last selected point Geometriaren klon bat sortzen du, erreferentzia gisa hautatutako azken puntua hartuta @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Murriztu arkua edo zirkulua - + Constrain an arc or a circle Murriztu arku bat edo zirkulu bat - + Constrain radius Murriztu erradioa - + Constrain diameter Murriztu diametroa - + Constrain auto radius/diameter Murriztu erradio/diametro automatikoa @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klonatu - + Creates a clone of the geometry taking as reference the last selected point Geometriaren klon bat sortzen du, erreferentzia gisa hautatutako azken puntua hartuta @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Murriztu angelua - + Fix the angle of a line or the angle between two lines Finkatu lerro baten angelua edo bi lerroren arteko angelua @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Murriztu bat datozenak - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Sortu bat datorren murrizketa bat puntuen artean, edo murrizketa kontzentriko bat zirkuluen, arkuen eta elipseen artean @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Murriztu diametroa - + Fix the diameter of a circle or an arc Finkatu zirkulu baten edo arku baten diametroa @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Murriztu distantzia - + Fix a length of a line or the distance between a line and a vertex or between two circles Finkatu lerro baten luzera edo lerro baten eta erpin baten arteko edo bi zirkuluren arteko distantzia @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Murriztu distantzia horizontala - + Fix the horizontal distance between two points or line ends Finkatu bi punturen edo bi lerro-amaieren arteko distantzia horizontala @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Murriztu distantzia bertikala - + Fix the vertical distance between two points or line ends Finkatu bi punturen edo bi lerro-amaieren arteko distantzia bertikala @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Murriztu berdin - + Create an equality constraint between two lines or between circles and arcs Sortu berdintasun-murrizketa bat bi lerroren artean edo zirkuluen eta arkuen artean @@ -520,12 +520,12 @@ hautatutako erpinean CmdSketcherConstrainParallel - + Constrain parallel Murriztu paraleloa - + Create a parallel constraint between two lines Sortu murrizketa paraleloa bi lerroren artean @@ -533,12 +533,12 @@ hautatutako erpinean CmdSketcherConstrainPerpendicular - + Constrain perpendicular Murriztu perpendikularra - + Create a perpendicular constraint between two lines Sortu murrizketa perpendikularra bi lerroren artean @@ -546,12 +546,12 @@ hautatutako erpinean CmdSketcherConstrainPointOnObject - + Constrain point onto object Murriztu puntua objektuan - + Fix a point onto an object Finkatu puntu bat objektu batean @@ -559,12 +559,12 @@ hautatutako erpinean CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Murriztu erradio/diametro automatikoa - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Finkatu diamteroa zirkulu bat hautatu bada, edo erradioa arku/spline polo bat hautatu bada @@ -572,12 +572,12 @@ hautatutako erpinean CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Murriztu errefrakzioa (Snell-en legea) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Sortu Snell-en errefrakzio-legearen murrizketa bat, izpien bi amaiera-punturen @@ -587,12 +587,12 @@ artean eta ertz bat interfaze modura erabilita. CmdSketcherConstrainSymmetric - + Constrain symmetrical Murriztu simetrikoki - + Create a symmetry constraint between two points with respect to a line or a third point Sortu simetria-murrizketa bat bi punturen artean, @@ -602,12 +602,12 @@ lerro batekiko edo hirugarren puntu batekiko CmdSketcherConstrainTangent - + Constrain tangent Murriztu tangentea - + Create a tangent constraint between two entities Sortu murrizketa tangentea bi lerroren artean @@ -641,12 +641,12 @@ lerro batekiko edo hirugarren puntu batekiko CmdSketcherCopy - + Copy Kopiatu - + Creates a simple copy of the geometry taking as reference the last selected point Geometriaren kopia sinple bat sortzen du, erreferentzia gisa hautatutako azken puntua hartuz @@ -1031,12 +1031,12 @@ lerro batekiko edo hirugarren puntu batekiko CmdSketcherDeleteAllConstraints - + Delete all constraints Ezabatu murrizketa guztiak - + Delete all constraints in the sketch Ezabatu krokiseko murrizketa guztiak @@ -1044,12 +1044,12 @@ lerro batekiko edo hirugarren puntu batekiko CmdSketcherDeleteAllGeometry - + Delete all geometry Ezabatu geometria osoa - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Ezabatu uneko krokiseko geometria eta murrizketa guztiak, kanpoko geometria salbu @@ -1233,12 +1233,12 @@ ispilatzerako erreferentzia gisa. CmdSketcherMove - + Move Mugitu - + Moves the geometry taking as reference the last selected point Geometria mugitzen du, hautatutako azken puntua erreferentzia gisa hartuta @@ -1259,12 +1259,12 @@ ispilatzerako erreferentzia gisa. CmdSketcherRectangularArray - + Rectangular array Matrize laukizuzena - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Geometriaren matrize-eredu laukizuzena sortzen du, erreferentzia modura hautatutako azken puntua hartuta @@ -1272,12 +1272,12 @@ ispilatzerako erreferentzia gisa. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Kendu ardatzen lerrokatzea - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Murrizketak aldatzen ditu ardatzen lerrokatzea kentzeko eta aldi berean hautapenaren murrizketa-erlazioak mantentzeko @@ -1300,12 +1300,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Erakutsi/ezkutatu barne-geometria - + Show all internal geometry or hide unused internal geometry Erakutsi barne-geometria guztia edo ezkutatu erabili gabeko barne-geometria @@ -1313,8 +1313,8 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Hautatu gatazkan dauden murrizketak @@ -1322,12 +1322,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectConstraints - + Select associated constraints Hautatu elkartuta dauden murrizketak - + Select the constraints associated with the selected geometrical elements Hautatu elementu geometriko hautatuei lotutako murrizketak @@ -1335,12 +1335,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Hautatu elkartutako geometria - + Select the geometrical elements associated with the selected constraints Hautatu murrizketa hautatuei lotutako elementu geometrikoak @@ -1348,12 +1348,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Hautatu murrizketarik gabeko askatasun-gradua - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Hautatu elementu geometrikoak ebazleak elementu horietan murriztu gabeko askatasun-graduak detektatzen dituenean. @@ -1361,12 +1361,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Hautatu ardatz horizontala - + Select the local horizontal axis of the sketch Hautatu krokisaren ardatz horizontal lokala @@ -1374,8 +1374,8 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Hautatu gaizki eratutako murrizketak @@ -1383,12 +1383,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectOrigin - + Select origin Hautatu jatorria - + Select the local origin point of the sketch Hautatu krokisaren jatorrizko puntu lokala @@ -1396,8 +1396,8 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Hautatu partzialki erredundanteak diren murrizketak @@ -1405,8 +1405,8 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Hautatu murrizketa erredundanteak @@ -1414,12 +1414,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSelectVerticalAxis - + Select vertical axis Hautatu ardatz bertikala - + Select the local vertical axis of the sketch Hautatu krokisaren ardatz bertikal lokala @@ -1466,12 +1466,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherSymmetry - + Symmetry Simetria - + Creates symmetric geometry with respect to the last selected line or point Geometria simetrikoa sortzen du hautatutako azken lerro edo puntuekiko @@ -1479,12 +1479,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Aktibatu/desaktibatu murrizketa - + Activates or deactivates the selected constraints Hautatutako murrizketak aktibatzen edo desaktibatzen ditu @@ -1505,12 +1505,12 @@ Horrela 'Euskarria' propietatea garbituko da, halakorik badago. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Aktibatu/desaktibatu gidatze/erreferentziako murrizketa - + Set the toolbar, or the selected constraints, into driving or reference mode Ezarri tresna-barra, edo hautatutako murrizketak, @@ -1599,54 +1599,54 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Gehitu murrizketa finkoa - + Add 'Block' constraint Gehitu 'Bloke' murrizketa - + Add block constraint Gehitu bloke-murrizketa - - + + Add coincident constraint Gehitu bat datorren murrizketa - - + + Add distance from horizontal axis constraint Gehitu distantzia ardatz horizontaleko murrizketatik - - + + Add distance from vertical axis constraint Gehitu distantzia ardatz bertikaleko murrizketatik - - + + Add point to point distance constraint Gehitu puntutik punturako distantzia-murrizketa - - + + Add point to line Distance constraint Gehitu puntutik lerrorako distantzia-murrizketa - - + + Add circle to circle distance constraint Gehitu zirkulutik zirkulurako distantzia-murrizketa - + Add circle to line distance constraint Gehitu zirkulutik lerrorako distantzia-murrizketa @@ -1655,8 +1655,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - + + Add length constraint Gehitu luzera-murrizketa @@ -1778,159 +1778,159 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Gehitu Y distantziaren murrizketa - + Add point to circle Distance constraint Gehitu puntutik zirkulurako distantzia-murrizketa - - + + Add point on object constraint Gehitu objektu gaineko puntuaren murrizketa - - + + Add point to point horizontal distance constraint Gehitu puntutik punturako distantzia horizontaleko murrizketa - + Add fixed x-coordinate constraint Gehitu X koordenatu finkoko murrizketa - - + + Add point to point vertical distance constraint Gehitu puntutik punturako distantzia bertikaleko murrizketa - + Add fixed y-coordinate constraint Gehitu Y koordenatu finkoko murrizketa - - + + Add parallel constraint Gehitu murrizketa paraleloa - - - - - - - + + + + + + + Add perpendicular constraint Gehitu murrizketa perpendikularra - + Add perpendicularity constraint Gehitu perpendikulartasun-murrizketa - + Swap coincident+tangency with ptp tangency Trukatu bat etortzea+tangentzia ptp tangentziarekin - + Swap PointOnObject+tangency with point to curve tangency Trukatu PuntuaObjektuan+tangentzia puntutik kurbarako tangentziarekin - - - - - - - + + + + + + + Add tangent constraint Gehitu tangente-murrizketa - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Gehitu tangentzia-murrizketako puntua - - - - + + + + Add radius constraint Gehitu erradio-murrizketa - - - - + + + + Add diameter constraint Gehitu diametro-murrizketa - - - - + + + + Add radiam constraint Gehitu erradio/diametro-murrizketa - - - - + + + + Add angle constraint Gehitu angelu-murrizketa - - + + Add equality constraint Gehitu berdintasun-murrizketa - - - - - + + + + + Add symmetric constraint Gehitu simetria-murrizketa - + Add Snell's law constraint Gehitu Snell-en legearen murrizketa - + Toggle constraint to driving/reference Txandakatu murrizketa gidatze/erreferentziara - + Activate/Deactivate constraint Aktibatu/desaktibatu murrizketa @@ -2101,47 +2101,47 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Elkartu kurbak - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Barne-geometria agerian uzten - + Create symmetric geometry Sortu geometria simetrikoa - + Copy/clone/move geometry Kopiatu/klonatu/mugitu geometria - + Create copy of geometry Sortu geometriaren kopia - + Delete all geometry Ezabatu geometria osoa - + Delete All Constraints Ezabatu murrizketa guztiak - + Remove Axes Alignment Kendu ardatzen lerrokatzea @@ -2159,8 +2159,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Eguneratu murrizketen espazio birtuala - + Add auto constraints Gehitu murrizketa automatikoak @@ -2175,22 +2175,22 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Aldatu krokis-murrizketaren izena - + Drag Point Arrastatu puntua - + Drag Curve Arrastatu kurba - + Drag Constraint Arrastatu murrizketa - + Modify sketch constraints Aldatu krokis-murrizketak @@ -2229,6 +2229,11 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Adabegia ezin da txertatu B-spline parametro-barrutiaren kanpoaldean. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Ez erantsi - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Hautapen okerra @@ -2633,8 +2637,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - + + Double constraint Murrizketa bikoitza @@ -2650,8 +2654,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - + + The selected edge already has a Block constraint! Hautatutako ertzak badauka bloke-murrizketa bat! @@ -2663,7 +2667,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - + Select vertices from the sketch. Hautatu krokiseko erpinak. @@ -2688,29 +2692,29 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Ezin da bloke-murrizketarik gehitu krokisa ebatzi gabe badago edo murrizketa errepikatuak eta gatazkan daudenak badaude. - + Select one edge from the sketch. Hautatu krokiseko ertz bat. - + Select only edges from the sketch. Hautatu krokiseko ertzak soilik. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Hautatutako objektuen kopurua ez da 3 + - Error Errorea @@ -2725,75 +2729,75 @@ murrizketak, geometria degeneratuak, etab. aztertuta. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Amaiera-puntutik amaiera-punturako tangentzia aplikatu da horren ordez. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Hautatu krokisaren bi erpin edo gehiago bat datorren murrizketa baterako, edo bi edo gehiago zirkulu, elipse, arku edo arkuen elipse, murrizketa kontzentriko baterako. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Hautatu krokisaren bi erpin bat datorren murrizketa baterako, edo bi zirkulu, elipse, arku edo arkuen elipse, murrizketa kontzentriko baterako. - + Select exactly one line or one point and one line or two points from the sketch. Hautatu krokiseko lerro bat edo puntu bat edo lerro bat eta bi puntu. - + Cannot add a length constraint on an axis! Ezin zaio luzera-murrizketa bat gehitu ardatz bati! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Hautatu krokiseko lerro bat edo puntu bat eta lerro bat edo bi puntu edo bi zirkulu. - + This constraint does not make sense for non-linear curves. Murrizketa honek ez du zentzurik linealak ez diren kurbekin. - + Endpoint to edge tangency was applied instead. Amaiera-puntutik ertzerako tangentzia aplikatu da horren ordez. - - - - - - + + + + + + Select the right things from the sketch. Hautatu krokiseko elementu egokiak. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Hautatu B-spline pisua ez den ertz bat. @@ -2803,93 +2807,92 @@ murrizketak, geometria degeneratuak, etab. aztertuta. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Hautatutako puntuetako bat ere ez dago murriztuta bakoitzari dagokion kurban, elementu bereko osagai direlako, kanpo-geometria direlako edo ertza hautatu ezin delako. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Hautatutako puntuetako bat ere ez dago murriztuta bakoitzari dagokion kurban, bai elementu bereko osagai direlako bai kanpo-geometria direlako. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Hautatu krokiseko lerro bat, puntu bat edo bi puntu. - + Cannot add a horizontal length constraint on an axis! Ezin zaio luzera horizontaleko murrizketa bat gehitu ardatz bati! - + Cannot add a fixed x-coordinate constraint on the origin point! Ezin zaio X koordenatu finkoko murrizketa bat gehitu jatorri-puntuari! - - + + This constraint only makes sense on a line segment or a pair of points. Murriztapen honek lerro segmentuetan edo puntu-bikoteetan soilik du zentzua. - + Cannot add a vertical length constraint on an axis! Ezin zaio luzera bertikaleko murrizketa bat gehitu ardatz bati! - + Cannot add a fixed y-coordinate constraint on the origin point! Ezin zaio Y koordenatu finkoko murrizketa bat gehitu jatorri-puntuari! - + Select two or more lines from the sketch. Hautatu krokiseko bi lerro edo gehiago. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Hautatu krokiseko bi lerro, gutxienez. - - Select a valid line. - Hautatu baliozko lerro bat. - - - - + The selected edge is not a valid line. Hautatutako ertza ez da baliozko lerro bat. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2899,35 +2902,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-puntu; bi kurba eta puntu bat. - + Select some geometry from the sketch. perpendicular constraint Hautatu krokiseko geometriaren bat. - - + + Cannot add a perpendicularity constraint at an unconnected point! Ezin zaio perpendikulartasun-murrizketa bat gehitu konektatu gabeko puntu bati! - - + + One of the selected edges should be a line. Hautatutako ertzetako batek lerroa izan behar du. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Amaiera-puntutik amaiera-punturako tangentzia aplikatu da. Bat datorren murrizketa ezabatu egin da. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Amaiera-puntutik ertzerako tangentzia aplikatu da. Objektuaren gaineko puntuaren murrizketa ezabatu egin da. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2937,67 +2940,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-puntu; bi kurba eta puntu bat. - + Select some geometry from the sketch. tangent constraint Hautatu krokiseko geometriaren bat. - - - + + + Cannot add a tangency constraint at an unconnected point! Ezin zaio tangentzia-murrizketa gehitu konektatu gabeko puntu bati! - - + + Tangent constraint at B-spline knot is only supported with lines! B-spline adabegiko tangente-murrizketa lerroekin soilik onartzen da. - + B-spline knot to endpoint tangency was applied instead. B-splinearen adabegitik amaiera-punturako tangentzia aplikatu da horren ordez. - - + + Wrong number of selected objects! Hautatutako objektu kopuru okerra! - - + + With 3 objects, there must be 2 curves and 1 point. 3 objektu badira, 2 kurba eta puntu1 egon behar dute. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Hautatu krokiseko arku edo zirkulu bat edo gehiago. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Hautatu B-spline polo bat edo gehiago edo zirkuluen arku bat edo gehiago krokisean, baina ez bi motak nahastuta. - - - + + + Constraint only applies to arcs or circles. Murrizketa arkuei edo zirkuluei soilik aplikatzen zaie. - - + + Select one or two lines from the sketch. Or select two edges and a point. Hautatu krokisaren lerro bat edo bi. Edo hautatu bi ertz eta puntu bat. @@ -3012,88 +3015,88 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Ezin da angelu-murrizketa bat ezarri bi lerro paralelotarako. - + Cannot add an angle constraint on an axis! Ezin zaio angelu-murrizketa bat gehitu ardatz bati! - + Select two edges from the sketch. Hautatu krokiseko bi ertz. - + Select two or more compatible edges. Hautatu bateragarriak diren bi ertz edo gehiago. - + Sketch axes cannot be used in equality constraints. Krokis-ardatzak ezin dira erabili berdintasun-murrizketetan. - + Equality for B-spline edge currently unsupported. Momentuz ez dago onartuta B-spline ertzen berdintasuna. - - - + + + Select two or more edges of similar type. Hautatu antzekoak diren bi ertz edo gehiago. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Hautatu krokiseko bi puntu eta simetria-lerro bat, bi puntu eta simetria-puntu bat edo lerro bat eta simetria-puntu bat. - - + + Cannot add a symmetry constraint between a line and its end points. Ezin da simetria-murrizketarik gehitu lerro baten eta haren amaiera-puntuen artean. - - + + Cannot add a symmetry constraint between a line and its end points! Ezin da simetria-murrizketarik gehitu lerro baten eta haren amaiera-puntuen artean! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Hautatu lerroen bi amaiera-puntu izpi gisa joka dezaten, eta muga bat adieraziko duen ertz bat. Hautatutako lehen puntua n1 indizeari dagokio, bigarrena n2 indizeari, eta zero puntuaren balioak n2/n1 erlazioa ezartzen du. - + Selected objects are not just geometry from one sketch. Hautatutako elementuak ez dira soilik krokis bateko geometria. - + Cannot create constraint with external geometry only. Ezin da murrizketa sortu kanpo-geometria soilik erabiliz. - + Incompatible geometry is selected. Bateragarria ez den geometria hautatu da. + - - - - + + + Select constraints from the sketch. Hautatu krokiseko murrizketak. @@ -3115,9 +3118,9 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Definitu B-spline gradua, 1 eta %1 artekoa: - + CAD Kernel Error CAD kernel-errorea @@ -3193,69 +3196,69 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Amaierako bi puntu, edo bat datozen puntuak, hautatu beharko lirateke. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Hautatu krokis bakar bateko elementuak. - + No constraint selected Ez da murrizketarik hautatu - + At least one constraint must be selected Gutxienez murrizketa bat hautatu behar da - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Eraikuntza simetrikoak gutxienez bi elementu geometriko behar ditu, eta azken elementu geometrikoa simetria-eraikuntzaren erreferentzia izango da. - + The last element must be a point or a line serving as reference for the symmetry construction. Azken elementuak simetria-eraikuntzarentzat erreferentzia gisa balioko duen puntu edo lerro bat izan behar du. - - + + A copy requires at least one selected non-external geometric element Kopia batek behar du kanpokoa ez den elementu geometriko bat, gutxienez, hautatua egon dadin - + Delete All Geometry Ezabatu geometria guztia - + Are you really sure you want to delete all geometry and constraints? Ziur zaude geometria eta murrizketa guztiak ezabatu nahi dituzula? - + Delete All Constraints Ezabatu murrizketa guztiak - + Are you really sure you want to delete all the constraints? Ziur zaude murrizketa guztiak ezabatu nahi dituzula? - + Removal of axes alignment requires at least one selected non-external geometric element Ardatzen lerrokatzea kentzeko, kanpokoa ez den elementu geometriko bat, gutxienez, hautatu behar da @@ -3336,6 +3339,11 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3646,12 +3654,12 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Luzera: - + Refractive index ratio Errefrakzio-indizea - + Ratio n2/n1: n2/n1 erlazioa: @@ -4067,13 +4075,13 @@ aldaketak zuzenean islatuko dira kopietan SketcherGui::SketcherRegularPolygonDialog - Create array - Sortu matrizea + Create regular polygon + Sortu poligono erregularra - Number of Sides: - Alde kopurua: + Number of sides: + Number of sides: @@ -5076,112 +5084,112 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. SketcherGui::ViewProviderSketch - + Edit sketch Editatu krokisa - + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - + Do you want to close this dialog? Elkarrizketa-koadro hau itxi nahi duzu? - + Invalid sketch Baliogabeko krokisa - + Do you want to open the sketch validation tool? Krokisak balidatzeko tresna ireki nahi al duzu? - + The sketch is invalid and cannot be edited. Krokisa baliogabea da eta ezin da editatu. - + Please remove the following constraint: Kendu honako murrizketa: - + Please remove at least one of the following constraints: Kendu gutxienez honako murrizketetako bat: - + Please remove the following redundant constraint: Kendu erredundantea den honako murrizketa: - + Please remove the following redundant constraints: Kendu erredundanteak diren honako murriketak: - + The following constraint is partially redundant: Honako murrizketa partzialki erredundantea da: - + The following constraints are partially redundant: Honako murrizketak partzialki erredundanteak dira: - + Please remove the following malformed constraint: Kendu gaizki eratuta dagoen honako murrizketa: - + Please remove the following malformed constraints: Kendu gaizki eratuta dauden honako murrizketak: - + Empty sketch Krokis hutsa - + Over-constrained: Gehiegi murriztutakoa: - + Malformed constraints: Gaizki eratutako murrizketak: - + Redundant constraints: Murrizketa erredundanteak: - + Partially redundant: Partzialki erredundantea: - + Solver failed to converge Ebazleak ezin izan du konbergitu - + Under constrained: Gutxiegi murriztutakoa: - + %n DoF(s) Askatasun-gradu %n @@ -5189,7 +5197,7 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. - + Fully constrained Osorik murritua @@ -5260,8 +5268,8 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Geometriaren klon bat sortzen du, erreferentzia gisa hautatutako azken puntua hartuta @@ -5269,17 +5277,17 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_CompCopy - + Clone Klonatu - + Copy Kopiatu - + Move Mugitu @@ -5287,8 +5295,8 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Finkatu zirkulu baten edo arku baten diametroa @@ -5296,8 +5304,8 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Finkatu zirkulu baten edo arku baten erradioa/diametroa @@ -5305,8 +5313,8 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Finkatu zirkulu baten edo arku baten erradioa @@ -5314,8 +5322,8 @@ Krokisaren geometriak eta murrizketak analizatzen dira horretarako. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Geometriaren kopia sinple bat sortzen du, erreferentzia gisa hautatutako azken puntua hartuz @@ -5601,8 +5609,8 @@ Hautatu krokis hau hautatutako objektuei eransteko erabiliko den metodoa. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Geometria mugitzen du, hautatutako azken puntua erreferentzia gisa hartuta @@ -5927,7 +5935,7 @@ Eigen Sparse QR algoritmoa matrize sakabanatuetarako optimizatuta dago; normalea ViewProviderSketch - + and %1 more eta %1 gehiago @@ -6156,64 +6164,65 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Parabolak migratu dira. Migratutako fitxategiak ezin dira ireki FreeCADen aurreko bertsioetan. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Errorea - + Failed to delete all geometry Huts egin du geometria osoa ezabatzeak - + Failed to delete all constraints Huts egin du murrizketa guztiak ezabatzeak - - + + Invalid selection Baliogabeko hautapena - + Selection has no valid geometries. Hautapenak ez du baliozko geometriarik. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6223,18 +6232,18 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Murrizketak indize-informazio baliogabea du eta gaizki eratuta dago. - - - - - - - + + + + + + + Invalid Constraint Baliogabeko murrizketa @@ -6274,8 +6283,8 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Errorea B-spline poloa sortzean - + Error creating B-spline Errorea B-spline kurba gehitzean @@ -6331,16 +6340,17 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Huts egin du lerroa gehitzeak - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6375,9 +6385,9 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Huts egin du ertza muxarratzeak + - Value Error Balio-errorea @@ -6431,6 +6441,11 @@ Sareta-tartea aldatuko da pixel-zenbaki hau baino txikiagoa bihurtzen bada.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6630,12 +6645,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherConstrainRadius - + Constrain radius Murriztu erradioa - + Fix the radius of a circle or an arc Finkatu zirkulu baten edo arku baten erradioa @@ -6752,12 +6767,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6890,12 +6905,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherConstrainCoincidentUnified - + Constrain coincident Murriztu bat datozenak - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6903,12 +6918,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7225,12 +7240,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7238,12 +7253,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7251,12 +7266,12 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7264,14 +7279,56 @@ Hutsi dagoen espazioan klik eginda, uneko murriztapena baliozkotuko da. Eskuinek CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index c7c767fa52..65b81239ea 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Kloonaa - + Creates a clone of the geometry taking as reference the last selected point Luo kloonin geometriasta käyttäen viimeistä valittua pistettä viittauksena @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Rajoita ympyrän kaari - + Constrain an arc or a circle Rajoita ympyrän kaari - + Constrain radius Rajoita säde - + Constrain diameter Rajoita halkaisija - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Kloonaa - + Creates a clone of the geometry taking as reference the last selected point Luo kloonin geometriasta käyttäen viimeistä valittua pistettä viittauksena @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Rajoita kulma - + Fix the angle of a line or the angle between two lines Korjaa viivan kulmaa tai kahden viivan välistä kulma @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Samanlaisuus rajoite - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Rajoita halkaisija - + Fix the diameter of a circle or an arc Kiinnitä ympyrän tai kaaren halkaisija @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Etäisyys rajoitus - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Vaakasuoran etäisyyden rajoite - + Fix the horizontal distance between two points or line ends Korjaa kahden pisteen tai viivanpään vaakasuoraa etäisyyttä @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Korjaa kahden pisteen tai viivanpään pystysuoraa etäisyyttä @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Yhtäsuuruus rajoite - + Create an equality constraint between two lines or between circles and arcs Luo yhtäsuuruus rajoite kahdelle viivan tai ympyröiden ja kaarien väliin @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Rajoita yhdensuuntaiseksi - + Create a parallel constraint between two lines Luo rinnakkaisuus rajoite kahden viivan välille @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Rajoita kohtisuorasti - + Create a perpendicular constraint between two lines Luo kohtisuora rajoitus kahden viivan väliin @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Rajoita piste objektiin - + Fix a point onto an object Korjaa piste objektin paalle @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Rajoita taittuminen (Snellin laki) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Rajoita symmetrisesti - + Create a symmetry constraint between two points with respect to a line or a third point Luo symmetriarajoite kahden pisteen välille, @@ -602,12 +602,12 @@ käyttäen jakajana viivaa tai kolmatta pistettä CmdSketcherConstrainTangent - + Constrain tangent Rajoita tangentti - + Create a tangent constraint between two entities Luo tangenttirajoite kahden yksikön välillä @@ -641,12 +641,12 @@ käyttäen jakajana viivaa tai kolmatta pistettä CmdSketcherCopy - + Copy Kopio - + Creates a simple copy of the geometry taking as reference the last selected point Luo yksinkertaisen kopion geometriasta käyttäen viimeistä valittua pistettä viittauksena @@ -1031,12 +1031,12 @@ käyttäen jakajana viivaa tai kolmatta pistettä CmdSketcherDeleteAllConstraints - + Delete all constraints Poista kaikki rajoitteet - + Delete all constraints in the sketch Poistaa kaikki rajoitteet luonnoksesta @@ -1044,12 +1044,12 @@ käyttäen jakajana viivaa tai kolmatta pistettä CmdSketcherDeleteAllGeometry - + Delete all geometry Poista kaikki geometria - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Poista kaikki geometria ja rajoitteet nykyisestä luonnoksesta, lukuun ottamatta ulkoista geometriaa @@ -1222,7 +1222,7 @@ X- tai Y-akselia tai origoa. Wrong selection - Virheellinen valinta + Väärä valinta @@ -1233,12 +1233,12 @@ X- tai Y-akselia tai origoa. CmdSketcherMove - + Move Siirrä - + Moves the geometry taking as reference the last selected point Siirtää geometriaa käyttäen viimeistä valittua pistettä viittauksena @@ -1259,12 +1259,12 @@ X- tai Y-akselia tai origoa. CmdSketcherRectangularArray - + Rectangular array Suorakaideruudukko - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Luo geometriasta suorakaideruudukon käyttäen viimeistä valittua pistettä referenssipisteenä @@ -1272,12 +1272,12 @@ X- tai Y-akselia tai origoa. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1300,12 +1300,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Näytä/Piilota sisäinen geometria - + Show all internal geometry or hide unused internal geometry Näytä kaikki sisäinen geometria tai piilota käyttämätön sisäinen geometria @@ -1313,8 +1313,8 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Valitse ristiriitaiset rajoitteet @@ -1322,12 +1322,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectConstraints - + Select associated constraints Valitse liittyvät rajoitteet - + Select the constraints associated with the selected geometrical elements Valitse valittuihin geometrisiin elementteihin liittyvät rajoitteet @@ -1335,12 +1335,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Valitse liittyvä geometria - + Select the geometrical elements associated with the selected constraints Valitsee geometriset elementit, jotka liittyvät valittuihin rajoitteisiin @@ -1348,12 +1348,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Valitse vapaat geometriaelementit - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Valitse geometriset elementit, joissa ratkaisualgoritmi havaitsee yhä rajoittamattomia vapausasteita. @@ -1361,12 +1361,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Valitse vaaka-akseli - + Select the local horizontal axis of the sketch Valitse luonnoksen paikallinen vaakasuora akseli @@ -1374,8 +1374,8 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Valitse virheelliset rajoitteet @@ -1383,12 +1383,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectOrigin - + Select origin Valitse origo - + Select the local origin point of the sketch Valitse luonnoksen paikallinen origo @@ -1396,8 +1396,8 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Valitse osittain ylimääräiset rajoitteet @@ -1405,8 +1405,8 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Valitse tarpeettomat rajoitteet @@ -1414,12 +1414,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSelectVerticalAxis - + Select vertical axis Valitse pystyakseli - + Select the local vertical axis of the sketch Valitse luonnoksen paikallinen pystyakseli @@ -1466,12 +1466,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherSymmetry - + Symmetry Symmetria - + Creates symmetric geometry with respect to the last selected line or point Peilaa geometriaa suhteessa viimeisenä valittuun viivaan tai pisteeseen @@ -1479,12 +1479,12 @@ Tämä tyhjentää 'Tukipiste'-ominaisuuden, jos sellainen on. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Aktivoi/deaktivoi rajoite - + Activates or deactivates the selected constraints Aktivoi tai deaktivoi valitut rajoitteet @@ -1506,12 +1506,12 @@ rakennetilan ja tavallisen geometrian välillä edestakaisin CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Vaihda rajoite määräävän/referenssin välillä - + Set the toolbar, or the selected constraints, into driving or reference mode Vaihtaa työkalupalkin kuvakkeen, tai valitut rajoitteet, @@ -1600,54 +1600,54 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Lisää kiinteä rajoite - + Add 'Block' constraint Lisää 'Block' rajoitus - + Add block constraint Lisää lohkon rajoitus - - + + Add coincident constraint Lisää yhtenevyys-rajoite - - + + Add distance from horizontal axis constraint Lisää etäisyys vaaka-akselin rajoituksesta - - + + Add distance from vertical axis constraint Lisää etäisyys pystyakselin rajoituksesta - - + + Add point to point distance constraint Lisää pisteestä pisteeseen etäisyyden rajoite - - + + Add point to line Distance constraint Lisää piste viivalle etäisyysrajoite - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1656,8 +1656,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - + + Add length constraint Lisää pituusrajoite @@ -1779,159 +1779,159 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Lisää piste-on-objektilla rajoite - - + + Add point to point horizontal distance constraint Lisää pisteestä pisteeseen vaakasuuntaisen etäisyyden rajoite - + Add fixed x-coordinate constraint Lisää kiinnitetyn x-koordinaatin rajoite - - + + Add point to point vertical distance constraint Lisää pisteestä pisteeseen pystysuuntaisen etäisyyden rajoite - + Add fixed y-coordinate constraint Lisää kiinnitetyn y-koordinaatin rajoite - - + + Add parallel constraint Lisää yhdensuuntaisuuden rajoite - - - - - - - + + + + + + + Add perpendicular constraint Lisää kohtisuora rajoite - + Add perpendicularity constraint Lisää kohtisuoruuden rajoite - + Swap coincident+tangency with ptp tangency Vaihda yhtenevyyden+tangentiaalisuuden ja pisteestä-pisteeseen tangentiaalisuuden välillä - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Lisää tangentiaalisuus-rajoite - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Lisää tangenttirajoitepiste - - - - + + + + Add radius constraint Lisää säteen rajoite - - - - + + + + Add diameter constraint Lisää halkaisijan rajoite - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Lisää kulman rajoite - - + + Add equality constraint Lisää yhtäsuuruuden rajoite - - - - - + + + + + Add symmetric constraint Lisää symmetrisyyden rajoite - + Add Snell's law constraint Lisää Snellin lain rajoite - + Toggle constraint to driving/reference Vaihda rajoite määräävän/referenssin välillä - + Activate/Deactivate constraint Aktivoi/deaktivoi rajoite @@ -2102,47 +2102,47 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Sisäisen Geometrian näyttäminen - + Create symmetric geometry Luo symmetrinen geometria - + Copy/clone/move geometry Kopioi/kloonaa/siirrä geometriaa - + Create copy of geometry Tee kopio geometriasta - + Delete all geometry Poista kaikki geometria - + Delete All Constraints Poista kaikki rajoitteet - + Remove Axes Alignment Remove Axes Alignment @@ -2160,8 +2160,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Päivitä rajoituksen virtuaalinen tila - + Add auto constraints Lisää automaattisesti rajoitteita @@ -2176,22 +2176,22 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Nimeä rajoite uudelleen - + Drag Point Raahaa pistettä - + Drag Curve Raahaa käyrää - + Drag Constraint Raahaa rajoitetta - + Modify sketch constraints Muokkaa luonnoksen rajoitteita @@ -2230,6 +2230,11 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2334,16 +2339,16 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2409,20 +2414,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Älä liitä - - - - - - - - - - - - @@ -2433,133 +2426,144 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Virheellinen valinta @@ -2634,8 +2638,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - + + Double constraint Kaksinkertainen rajoite @@ -2651,8 +2655,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - + + The selected edge already has a Block constraint! Valitulla reunalla on jo lohkon rajoitus! @@ -2664,7 +2668,7 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - + Select vertices from the sketch. Valitse kärkipisteet luonnoksesta. @@ -2689,29 +2693,29 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Lohkon rajoitusta ei voida lisätä, jos luonnos on ratkaisematon tai on olemassa tarpeettomia ja ristiriitaisia rajoituksia. - + Select one edge from the sketch. Valitse yksi reuna luonnoksesta. - + Select only edges from the sketch. Valitse vain reunoja luonnoksesta. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Virhe @@ -2726,75 +2730,75 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Valitun sijasta käytettiin tangentiaalisuutta päätepisteestä päätepisteeseen. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Valitse täsmälleen yksi viiva tai yksi piste ja yksi viiva tai kaksi pistettä sketsistä. - + Cannot add a length constraint on an axis! Akselille ei voida lisätä pituusrajoitetta! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Valitse oikeat asiat luonnoksesta. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2804,93 +2808,92 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Yksikään valituista pisteistä ei rajoittunut vastaaviin käyriin, joko koska ne ovat saman elementin osia, tai koska ne ovat molemmat ulkoisia geometrioita, tai reuna ei ole tukikelpoinen. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Yksikään valituista pisteistä ei rajoittunut vastaaviin käyriin, joko koska ne ovat saman elementin osia, tai koska ne ovat molemmat ulkoisia geometrioita. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Valitse täsmälleen yksi viiva tai enintään kaksi pistettä sketsistä. - + Cannot add a horizontal length constraint on an axis! Akselille ei voida lisätä vaakasuoraa pituusrajoitetta! - + Cannot add a fixed x-coordinate constraint on the origin point! Alkupisteeseen ei voi lisätä kiinteää x-koordinaattirajoitetta! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Akselille ei voida lisätä vaakapituusrajoitetta! - + Cannot add a fixed y-coordinate constraint on the origin point! Alkupisteeseen ei voi lisätä kiinteää y-koordinaattirajoitetta! - + Select two or more lines from the sketch. Valitse kaksi tai useampi viiva sketsistä. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Valitse vähintään kaksi viivaa sketsistä. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2900,35 +2903,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päätepistettä; kaksi käyrää ja piste. - + Select some geometry from the sketch. perpendicular constraint Valitse jokin geometria luonnoksesta. - - + + Cannot add a perpendicularity constraint at an unconnected point! Yhdistämättömille pisteille ei voida lisätä samansuuntausuusrajoitetta! - - + + One of the selected edges should be a line. Yhden valituista reunoista pitäisi olla viiva. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Luotu päästä päähän -tangentti. Sattumarajoitus on poistettu. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2938,67 +2941,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päätepistettä; kaksi käyrää ja piste. - + Select some geometry from the sketch. tangent constraint Valitse jokin geometria luonnoksesta. - - - + + + Cannot add a tangency constraint at an unconnected point! Yhdistämättömään pisteeseen ei voi lisätä samansuuntaisuusrajoitetta! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Väärä lukumäärä valittuja kohteita! - - + + With 3 objects, there must be 2 curves and 1 point. 3 kohteella on oltava 2 käyrää ja 1 piste. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Valitse yksi tai userampia kaaria tai ympyröitä luonnoksesta. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Valitse luonnoksesta yksi tai useampi B-Splinien napa, tai yksi tai useampi kaari tai ympyrä, mutta ei molempien ryhmien sekamuotoa. - - - + + + Constraint only applies to arcs or circles. Rajoite sopii vain kaarille tai ympyröille. - - + + Select one or two lines from the sketch. Or select two edges and a point. Valitse yksi tai useampi viiva luonnoksesta. Tai valitse kaksi reunaa ja piste. @@ -3013,88 +3016,88 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Kulma-rajoitusta ei voi määrittää kahdelle samansuuntaiselle viivalle. - + Cannot add an angle constraint on an axis! Akseliin ei voi lisätä kulmarajoitetta! - + Select two edges from the sketch. Valitse kaksi reunaa sketsistä. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Ohjelma ei tällä hetkellä vielä tue yhtäsuuruutta B-splinin reunan kanssa. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Valitse kaksi pistettä ja symmetria linja, kaksi pistettä ja symmetria kohta, tai linja ja symmetriakohta luonnoksesta. - - + + Cannot add a symmetry constraint between a line and its end points. Ei voida lisätä symmetristä rajoitusta viivan ja sen päätepisteiden väliin. - - + + Cannot add a symmetry constraint between a line and its end points! Viivan ja sen päätepisteiden välille ei voi lisätä symmetriarajoitetta! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Valitse kaksi viivojen päätepistettä säteinä toimimaan sekä reuna kuvaamaan rajaa. Ensimmäinen valittu piste vastaa indeksiä n1, toinen - n2 ja viitearvo määrittää suhteen n2/n1. - + Selected objects are not just geometry from one sketch. Valitut kohteet eivät ole vain yhden luonnoksen geometriaa. - + Cannot create constraint with external geometry only. Rajoitetta ei voi luoda vain ulkoista geometriaa käyttämällä. - + Incompatible geometry is selected. Valittuna on epäyhteensopivaa geometriaa. + - - - - + + + Select constraints from the sketch. Valitse rajoitteet luonnoksesta. @@ -3116,9 +3119,9 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-ytimen virhe @@ -3194,69 +3197,69 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Valitse osat yhdestä luonnkoksesta. - + No constraint selected Ei rajoitetta valittuna - + At least one constraint must be selected Vähintään yksi rajoite on valittava - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Symmetrinen rakenne edellyttää vähintään kahta geometristä elementtiä, joista viimeinen geometrinen elementti on symmetrisen rakenteen viite. - + The last element must be a point or a line serving as reference for the symmetry construction. Viimeisen elementin on oltava symmetrisen rakenteen vertailukohtana käytettävä piste tai linja. - - + + A copy requires at least one selected non-external geometric element Kopio vaatii vähintään yhden valitun ei-ulkoisen geometrisen elementin - + Delete All Geometry Poista kaikki geometria - + Are you really sure you want to delete all geometry and constraints? Oletko varma, että haluat poistaa kaiken geometrian ja rajoitteet? - + Delete All Constraints Poista kaikki rajoitteet - + Are you really sure you want to delete all the constraints? Oletko varma, että haluat poistaa kaikki rajoitteet? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3337,6 +3340,11 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3647,12 +3655,12 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Pituus: - + Refractive index ratio Taitekerroin suhdeluku - + Ratio n2/n1: Suhde n2/n1: @@ -4068,13 +4076,13 @@ kopioissa SketcherGui::SketcherRegularPolygonDialog - Create array - Luo taulukkoruudukko + Create regular polygon + Luo säännöllinen monikulmio - Number of Sides: - Pintojen määrä: + Number of sides: + Number of sides: @@ -5078,112 +5086,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Muokkaa luonnosta - + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? - + Invalid sketch Virheellinen luonnos - + Do you want to open the sketch validation tool? Haluatko avata luonnoksen validointityökalun? - + The sketch is invalid and cannot be edited. Luonnos on virheellinen eikä sitä voi muokata. - + Please remove the following constraint: Poista seuraava rajoite: - + Please remove at least one of the following constraints: Poista ainakin yksi seuraavista rajoitteista: - + Please remove the following redundant constraint: Poista seuraava turha rajoite: - + Please remove the following redundant constraints: Poista seuraavat turhat rajoitteet: - + The following constraint is partially redundant: Seuraava rajoite on osittain tarpeeton: - + The following constraints are partially redundant: Seuraavat rajoitteet ovat osittain tarpeettomia: - + Please remove the following malformed constraint: Poista seuraava virheellinen rajoite: - + Please remove the following malformed constraints: Poista seuraavat virheelliset rajoitteet: - + Empty sketch Tyhjä luonnos - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5191,7 +5199,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5262,8 +5270,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Luo kloonin geometriasta käyttäen viimeistä valittua pistettä viittauksena @@ -5271,17 +5279,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Kloonaa - + Copy Kopio - + Move Siirrä @@ -5289,8 +5297,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Kiinnitä ympyrän tai kaaren halkaisija @@ -5298,8 +5306,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5307,8 +5315,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Korjaa ympyrän tai kaaren sädettä @@ -5316,8 +5324,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Luo yksinkertaisen kopion geometriasta käyttäen viimeistä valittua pistettä viittauksena @@ -5603,8 +5611,8 @@ Valitse uusi tapa liittää tämä luonnos valittuihin objekteihin. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Siirtää geometriaa käyttäen viimeistä valittua pistettä viittauksena @@ -5929,7 +5937,7 @@ Eigen-Sparse-QR -algoritmi on optimoitu matriiseille jotka ovat harvoja; yleens ViewProviderSketch - + and %1 more and %1 more @@ -6159,64 +6167,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Virhe - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Virheellinen valinta - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6226,18 +6235,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6277,8 +6286,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Virhe luotaessa B-splinin napaa - + Error creating B-spline Virhe luotaessa B-spliniä @@ -6334,16 +6343,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6378,9 +6388,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6434,6 +6444,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6633,12 +6648,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Rajoita säde - + Fix the radius of a circle or an arc Korjaa ympyrän tai kaaren sädettä @@ -6755,12 +6770,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6893,12 +6908,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Samanlaisuus rajoite - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6906,12 +6921,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7228,12 +7243,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7241,12 +7256,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7254,12 +7269,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7267,14 +7282,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 57332d327a..bd7f982ff6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Cloner - + Creates a clone of the geometry taking as reference the last selected point Créer un clone de la géométrie en prenant comme référence le dernier point sélectionné @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Contrainte d'arc ou de cercle - + Constrain an arc or a circle Contraindre un arc ou un cercle - + Constrain radius Contrainte de rayon - + Constrain diameter Contrainte de diamètre - + Constrain auto radius/diameter Contrainte automatique du rayon/diamètre @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Cloner - + Creates a clone of the geometry taking as reference the last selected point Créer un clone de la géométrie en prenant comme référence le dernier point sélectionné @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Contrainte angulaire - + Fix the angle of a line or the angle between two lines Fixer l'angle d'une ligne ou l'angle entre deux lignes @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Contrainte de coïncidence - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Créer une contrainte de coïncidence entre des points, ou une contrainte concentrique entre des cercles, des arcs et des ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Contrainte de diamètre - + Fix the diameter of a circle or an arc Fixer le diamètre d'un cercle ou d'un arc @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Contrainte de distance - + Fix a length of a line or the distance between a line and a vertex or between two circles Fixer la longueur d'une ligne ou la distance entre une ligne et un sommet ou entre deux cercles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Contrainte de distance horizontale - + Fix the horizontal distance between two points or line ends Fixer la distance horizontale entre deux points ou extrémités de ligne @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Contrainte de distance verticale - + Fix the vertical distance between two points or line ends Fixer la distance verticale entre deux points ou extrémités de ligne @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Contrainte d'égalité - + Create an equality constraint between two lines or between circles and arcs Créer une contrainte d'égalité entre deux lignes ou entre des cercles et/ou des arcs @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Contrainte parallèle - + Create a parallel constraint between two lines Créer une contrainte parallèle entre deux lignes @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Contrainte perpendiculaire - + Create a perpendicular constraint between two lines Créer une contrainte de perpendicularité entre deux lignes @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Contrainte de point(s) sur un/des objet(s) - + Fix a point onto an object Contraindre un/des point(s) sur une/des ligne(s) @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Contrainte automatique du rayon/diamètre - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fixer le diamètre si l'on choisit un cercle ou le rayon si l'on choisit un arc ou une B-spline @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Contrainte de réfraction (loi de Snell) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Créer une contrainte de réfraction (loi de Snell) entre deux extrémités de lignes et une arête en tant qu'interface. @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Contrainte symétrique - + Create a symmetry constraint between two points with respect to a line or a third point Créer une contrainte de symétrie entre deux points par rapport à une ligne ou un point @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Contrainte tangente - + Create a tangent constraint between two entities Créer une contrainte tangente entre deux entités @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Copier - + Creates a simple copy of the geometry taking as reference the last selected point Créer une copie simple de la géométrie en prenant comme référence le dernier point sélectionné @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Supprimer toutes les contraintes - + Delete all constraints in the sketch Supprimer toutes les contraintes de l'esquisse @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Supprimer tous les éléments de géométrie - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Supprimer toute la géométrie et toutes les contraintes de l'esquisse actuelle, à l'exception de la géométrie externe @@ -1217,7 +1217,7 @@ as mirroring reference. Wrong selection - Sélection incorrecte + Mauvaise sélection @@ -1228,12 +1228,12 @@ as mirroring reference. CmdSketcherMove - + Move Déplacer - + Moves the geometry taking as reference the last selected point Déplace la géométrie en prenant comme référence le dernier point sélectionné @@ -1254,12 +1254,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Créer une répétition linéaire - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Créer une répétition linéaire de la géométrie en prenant comme référence le dernier point sélectionné @@ -1267,12 +1267,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Supprimer l'alignement des axes - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifier les contraintes pour supprimer l'alignement des axes en essayant de préserver la relation de contrainte de la sélection @@ -1295,12 +1295,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Afficher/masquer la géométrie interne - + Show all internal geometry or hide unused internal geometry Afficher toute la géométrie interne ou masquer la géométrie interne inutilisée @@ -1308,8 +1308,8 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Sélectionner les contraintes en conflit @@ -1317,12 +1317,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectConstraints - + Select associated constraints Sélectionner les contraintes associées - + Select the constraints associated with the selected geometrical elements Sélectionner les contraintes associées aux éléments géométriques sélectionnés @@ -1330,12 +1330,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Sélectionner la géométrie associée - + Select the geometrical elements associated with the selected constraints Sélectionner les éléments géométriques associés aux contraintes sélectionnées @@ -1343,12 +1343,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Sélectionner les degrés de liberté non contraints - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Sélectionne des éléments géométriques pour lesquels le solveur détecte encore des degrés de liberté non contraints. @@ -1356,12 +1356,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Sélectionner l'axe horizontal - + Select the local horizontal axis of the sketch Sélectionner l'axe horizontal local de l'esquisse @@ -1369,8 +1369,8 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Sélectionner les contraintes malformées @@ -1378,12 +1378,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectOrigin - + Select origin Sélectionner l'origine - + Select the local origin point of the sketch Sélectionne le point d'origine local de l'esquisse @@ -1391,8 +1391,8 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Sélectionner les contraintes partiellement redondantes @@ -1400,8 +1400,8 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Sélectionner les contraintes redondantes @@ -1409,12 +1409,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSelectVerticalAxis - + Select vertical axis Sélectionner l'axe vertical - + Select the local vertical axis of the sketch Sélectionner l'axe vertical local de l'esquisse @@ -1461,12 +1461,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherSymmetry - + Symmetry Symétriser - + Creates symmetric geometry with respect to the last selected line or point Créer une géométrie symétrique par rapport à la dernière ligne ou au point sélectionné @@ -1474,12 +1474,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activer/désactiver les contraintes - + Activates or deactivates the selected constraints Activer/désactiver les contraintes sélectionnées @@ -1500,12 +1500,12 @@ Cela effacera la propriété "Support", le cas échéant. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Activer/désactiver les contraintes pilotantes/pilotées - + Set the toolbar, or the selected constraints, into driving or reference mode Activer/désactiver la barre d'outils, ou les contraintes sélectionnées, @@ -1594,54 +1594,54 @@ les contraintes invalides, les géométries dégénérées, etc. Ajouter une contrainte fixe - + Add 'Block' constraint Ajouter une contrainte de blocage - + Add block constraint Ajouter une contrainte de blocage - - + + Add coincident constraint Ajouter une contrainte de coïncidence - - + + Add distance from horizontal axis constraint Ajouter une contrainte de distance par rapport à l'axe horizontal - - + + Add distance from vertical axis constraint Ajouter une contrainte de distance par rapport à l'axe vertical - - + + Add point to point distance constraint Ajouter une contrainte de distance entre points - - + + Add point to line Distance constraint Ajouter une contrainte de distance point à ligne - - + + Add circle to circle distance constraint Ajouter une contrainte de distance d'un cercle à un cercle - + Add circle to line distance constraint Ajouter une contrainte de distance d'un cercle à une ligne @@ -1650,8 +1650,8 @@ les contraintes invalides, les géométries dégénérées, etc. - - + + Add length constraint Ajouter une contrainte de longueur @@ -1773,159 +1773,159 @@ les contraintes invalides, les géométries dégénérées, etc. Ajouter une contrainte de distance en Y - + Add point to circle Distance constraint Ajouter une contrainte de distance d'un point à un cercle - - + + Add point on object constraint Ajouter une contrainte point sur objet - - + + Add point to point horizontal distance constraint Ajouter une contrainte de distance horizontale point à point - + Add fixed x-coordinate constraint Ajouter une contrainte fixe de coordonnée X - - + + Add point to point vertical distance constraint Ajouter une contrainte de distance verticale point à point - + Add fixed y-coordinate constraint Ajouter une contrainte fixe de coordonnée Y - - + + Add parallel constraint Ajouter une contrainte parallèle - - - - - - - + + + + + + + Add perpendicular constraint Ajouter une contrainte perpendiculaire - + Add perpendicularity constraint Ajouter une contrainte de perpendicularité - + Swap coincident+tangency with ptp tangency Permuter coincidence+tangence avec une tangente sommet/sommet - + Swap PointOnObject+tangency with point to curve tangency Échanger Point sur objet + tangence pour Point à courbe + tangence - - - - - - - + + + + + + + Add tangent constraint Ajouter une contrainte de tangence - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Ajouter un point de contrainte de tangence - - - - + + + + Add radius constraint Contraindre le rayon - - - - + + + + Add diameter constraint Contraindre le diamètre - - - - + + + + Add radiam constraint Ajouter une contrainte de rayon/diamètre - - - - + + + + Add angle constraint Ajouter une contrainte d'angle - - + + Add equality constraint Ajouter une contrainte d'égalité - - - - - + + + + + Add symmetric constraint Ajouter une contrainte de symétrie - + Add Snell's law constraint Ajouter une contrainte de loi de Snell - + Toggle constraint to driving/reference Activer/désactiver les contraintes pilotantes/pilotées - + Activate/Deactivate constraint Activer/désactiver les contraintes @@ -2096,47 +2096,47 @@ les contraintes invalides, les géométries dégénérées, etc. Joindre des courbes - + Cut in Sketcher - Cut in Sketcher + Couper dans l'esquisse - + Paste in Sketcher - Paste in Sketcher + Coller dans l'esquisse - + Exposing Internal Geometry Exposer la géométrie interne - + Create symmetric geometry Créer une géométrie symétrique - + Copy/clone/move geometry Copier/cloner/déplacer la géométrie - + Create copy of geometry Créer une copie de la géométrie - + Delete all geometry Supprimer tous les éléments de géométrie - + Delete All Constraints Supprimer toutes les contraintes - + Remove Axes Alignment Supprimer l'alignement des axes @@ -2154,8 +2154,8 @@ les contraintes invalides, les géométries dégénérées, etc. Mettre à jour l'espace virtuel de la contrainte - + Add auto constraints Ajouter des contraintes automatiques @@ -2170,22 +2170,22 @@ les contraintes invalides, les géométries dégénérées, etc. Renommer la contrainte d'esquisse - + Drag Point Faire glisser le Point - + Drag Curve Faire glisser la Courbe - + Drag Constraint Faire glisser la Contrainte - + Modify sketch constraints Modifier les contraintes d'esquisse @@ -2222,7 +2222,12 @@ les contraintes invalides, les géométries dégénérées, etc. Scale geometries - Scale geometries + Mettre à l'échelle les géométries + + + + Translate geometries + Translate geometries @@ -2328,16 +2333,16 @@ les contraintes invalides, les géométries dégénérées, etc. Le nœud ne peut pas être inséré en dehors de la plage de paramètres de la B-spline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range L'index des paramètres du ToolWidget est en dehors de la plage @@ -2403,20 +2408,8 @@ les contraintes invalides, les géométries dégénérées, etc. Ne pas attacher - - - - - - - - - - - - @@ -2427,135 +2420,146 @@ les contraintes invalides, les géométries dégénérées, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection - Sélection invalide + Sélection incorrecte @@ -2628,8 +2632,8 @@ les contraintes invalides, les géométries dégénérées, etc. - - + + Double constraint Double contrainte @@ -2645,8 +2649,8 @@ les contraintes invalides, les géométries dégénérées, etc. - - + + The selected edge already has a Block constraint! L’arête sélectionnée possède déjà une contrainte de blocage ! @@ -2658,7 +2662,7 @@ les contraintes invalides, les géométries dégénérées, etc. - + Select vertices from the sketch. Sélectionner des sommets de l’esquisse. @@ -2683,29 +2687,29 @@ les contraintes invalides, les géométries dégénérées, etc. Une contrainte de blocage ne peut pas être ajoutée si l'esquisse n'est pas résolue ou s'il y a des contraintes redondantes ou conflictuelles. - + Select one edge from the sketch. Sélectionnez une arête de l’esquisse. - + Select only edges from the sketch. Sélectionnez uniquement des arêtes de l'esquisse. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + Seul le mode tangent-via-point est supporté avec une B-spline. - + Number of selected objects is not 3 Le nombre d'objets sélectionnés n'est pas 3 + - Error Erreur @@ -2720,171 +2724,170 @@ les contraintes invalides, les géométries dégénérées, etc. Le(s) élément(s) sélectionné(s) n'accepte(nt) pas de contrainte horizontale ou verticale ! - + Endpoint to endpoint tangency was applied instead. Une contrainte de tangence entre points d'extrémité a été créée à la place. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Sélectionner deux sommets ou plus de l’esquisse pour une contrainte de coïncidence, ou deux ou plusieurs cercles, ellipses, arcs ou arcs d’ellipse pour une contrainte concentrique. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Sélectionner deux sommets de l'esquisse pour une contrainte de coïncidence, ou deux cercles, ellipses, arcs ou arcs d'ellipse pour une contrainte concentrique. - + Select exactly one line or one point and one line or two points from the sketch. Sélectionnez soit une seule ligne, ou un point et une ligne, ou deux points de l'esquisse. - + Cannot add a length constraint on an axis! Impossible d'ajouter une contrainte de longueur sur un axe ! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Sélectionner exactement une ligne ou un point et une ligne ou deux points ou deux cercles de l'esquisse. - + This constraint does not make sense for non-linear curves. Cette contrainte n'a pas de sens pour les courbes non linéaires. - + Endpoint to edge tangency was applied instead. Une tangence entre le point d'extrémité et l'arête a été appliquée à la place. - - - - - - + + + + + + Select the right things from the sketch. Sélectionner les bons éléments de l'esquisse. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Sélectionner une arête qui ne représente pas un poids d'une B-Spline. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + Un ou deux points sur le(s) contrainte(s) des objets ont été supprimés, la dernière contrainte appliquée en interne s'applique également point sur objet. - + Select either several points, or several conics for concentricity. Sélectionner plusieurs points ou plusieurs coniques pour la concentricité. - + Select either one point and several curves, or one curve and several points Sélectionner soit un point et plusieurs courbes, soit une courbe et plusieurs points. - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Sélectionner soit un point et plusieurs courbes, soit une courbe et plusieurs points pour une contrainte de point sur objet, soit plusieurs points pour la contrainte de coïncidence, soit plusieurs coniques pour la concentricité. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Aucun des points sélectionnés n'a été contraint aux courbes respectives, soit parce que ce sont des parties du même élément, soit parce qu'ils sont tous deux de la géométrie externe, soit parce que la ligne n'est pas éligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Aucun des points sélectionnés n'ont été contraints aux courbes respectives, soit parce qu'ils font partie du même élément, soit parce qu'ils font tous partie de géométries externes. - + Cannot add a length constraint on this selection! Impossible d'ajouter une contrainte de longueur à cette sélection ! - - - - + + + + Select exactly one line or up to two points from the sketch. Sélectionner soit une seule ligne soit jusqu'à deux points de l'esquisse. - + Cannot add a horizontal length constraint on an axis! Impossible d'ajouter une contrainte de longueur horizontale sur un axe ! - + Cannot add a fixed x-coordinate constraint on the origin point! Impossible d'ajouter une contrainte fixe de coordonnée x sur le point d'origine ! - - + + This constraint only makes sense on a line segment or a pair of points. Cette contrainte n’a de sens que sur un segment de ligne ou une paire de points. - + Cannot add a vertical length constraint on an axis! Impossible d'ajouter une contrainte de longueur verticale sur un axe ! - + Cannot add a fixed y-coordinate constraint on the origin point! Impossible d'ajouter une contrainte fixe de coordonnée y sur le point d'origine ! - + Select two or more lines from the sketch. Sélectionnez au moins deux lignes de l'esquisse. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Sélectionner au moins deux lignes de l'esquisse. - - Select a valid line. - Sélectionner une ligne valide. - - - - + The selected edge is not a valid line. L'arête sélectionnée n'est pas une ligne valide. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2894,35 +2897,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. - + Select some geometry from the sketch. perpendicular constraint Sélectionner une géométrie de l'esquisse. - - + + Cannot add a perpendicularity constraint at an unconnected point! Impossible d'ajouter une contrainte de perpendicularité sur un point non connecté ! - - + + One of the selected edges should be a line. Une des arêtes sélectionnées doit être une ligne. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Une contrainte de tangence entre points d'extrémité a été créée. La contrainte de coïncidence a été supprimée. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Une contrainte de tangence entre point d'extrémité et arête a été créée. La contrainte point sur objet a été supprimée. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2932,67 +2935,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. - + Select some geometry from the sketch. tangent constraint Sélectionner une géométrie de l'esquisse. - - - + + + Cannot add a tangency constraint at an unconnected point! Impossible d'ajouter une contrainte de tangence à un point non connecté ! - - + + Tangent constraint at B-spline knot is only supported with lines! La contrainte de tangente au nœud de la B-spline n'est pris en charge que par des lignes ! - + B-spline knot to endpoint tangency was applied instead. Une tangence entre le noeud de la B-spline et le dernier point a été appliquée à la place. - - + + Wrong number of selected objects! Nombre d'objets sélectionnés erroné ! - - + + With 3 objects, there must be 2 curves and 1 point. Pour une sélection de 3 objets, il doit y avoir 2 courbes et 1 point. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Sélectionnez un ou plusieurs arcs ou cercles dans l'esquisse. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Sélectionner soit un ou plusieurs pôles B-Spline ou un ou plusieurs arcs ou cercles de l'esquisse, mais pas mélangés. - - - + + + Constraint only applies to arcs or circles. Contrainte applicable qu’aux arcs ou cercles. - - + + Select one or two lines from the sketch. Or select two edges and a point. Sélectionnez une ou deux lignes dans l'esquisse. Ou sélectionnez deux arêtes et un point. @@ -3007,88 +3010,88 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Une contrainte angulaire ne peut pas être appliquée à deux lignes parallèles. - + Cannot add an angle constraint on an axis! Impossible d'ajouter une contrainte angulaire sur un axe ! - + Select two edges from the sketch. Sélectionnez deux arêtes de l'esquisse. - + Select two or more compatible edges. Sélectionner deux arêtes compatibles ou plus. - + Sketch axes cannot be used in equality constraints. Les axes de l'esquisse ne peuvent pas être utilisés comme des contraintes d'alignement interne. - + Equality for B-spline edge currently unsupported. L'égalité pour l'arête de la B-spline n'est pas prise en charge pour l'instant. - - - + + + Select two or more edges of similar type. Sélectionner deux arêtes de type similaire ou plus. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Sélectionnez deux points et une ligne de symétrie, deux points et un point de symétrie, ou une ligne et un point de symétrie dans l'esquisse. - - + + Cannot add a symmetry constraint between a line and its end points. Impossible d'ajouter une contrainte de symétrie entre une ligne et ses extrémités. - - + + Cannot add a symmetry constraint between a line and its end points! Impossible d'ajouter une contrainte de symétrie entre une ligne et ses points d'extrémité ! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Sélectionner deux extrémités de lignes pour agir comme des rayons, et une arête qui représente une limite. Le premier point sélectionné correspond à l'indice n1, le deuxième à n2, et la valeur définit la rapport n2/n1. - + Selected objects are not just geometry from one sketch. Les objets sélectionnés ne sont pas seulement des géométries de l'esquisse. - + Cannot create constraint with external geometry only. Impossible de créer une contrainte avec uniquement une géométrie externe. - + Incompatible geometry is selected. La géométrie sélectionnée est incompatible. + - - - - + + + Select constraints from the sketch. Sélectionner les contraintes de l'esquisse. @@ -3110,9 +3113,9 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Définir le degré de la B-spline, entre 1 et %1 : - + CAD Kernel Error Erreur du noyau de CAO @@ -3188,69 +3191,69 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Sélectionner deux extrémités ou des points de coïncidence. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Sélectionner des éléments d'une seule esquisse. - + No constraint selected Aucune contrainte sélectionnée - + At least one constraint must be selected Au moins une contrainte doit être sélectionnée - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Une construction symétrique nécessite au moins deux éléments géométriques, le dernier élément géométrique étant la référence pour la construction de la symétrie. - + The last element must be a point or a line serving as reference for the symmetry construction. Le dernier élément doit être un point ou une ligne servant de référence pour la construction de la symétrie. - - + + A copy requires at least one selected non-external geometric element Une copie nécessite la sélection d'au moins un élément géométrique non externe - + Delete All Geometry Supprimer tous les éléments de géométrie - + Are you really sure you want to delete all geometry and constraints? Êtes-vous vraiment sûr de vouloir supprimer tous les éléments de géométrie et toutes les contraintes ? - + Delete All Constraints Supprimer toutes les contraintes - + Are you really sure you want to delete all the constraints? Êtes-vous vraiment sûr de vouloir supprimer toutes les contraintes ? - + Removal of axes alignment requires at least one selected non-external geometric element La suppression de l'alignement des axes nécessite au moins un élément géométrique non externe sélectionné @@ -3331,7 +3334,12 @@ Voir la documentation pour plus de détails. Scale parameters - Scale parameters + Paramètres de l'échelle + + + + Translate parameters + Translate parameters @@ -3643,12 +3651,12 @@ Voir la documentation pour plus de détails. Longueur : - + Refractive index ratio Ratio de l'indice de réfraction - + Ratio n2/n1: Ratio n2/n1 : @@ -4026,7 +4034,7 @@ Voir la documentation pour plus de détails. Makes the inter-row and inter-col spacing the same if clicked - Si coché, l'espacement entre les rangées et les colonnes sera identique + Si cette option est cochée, l'espacement entre les rangées et les colonnes sera identique. @@ -4062,13 +4070,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Créer un réseau + Create regular polygon + Créer un polygone régulier - Number of Sides: - Nombre de côtés : + Number of sides: + Number of sides: @@ -4087,7 +4095,7 @@ reflected on copies Task panel widgets - Task panel widgets + Widgets du panneau des tâches @@ -4170,7 +4178,7 @@ Cela nécessite de re-rentrer en mode édition pour que cela prenne effet. Dimension constraint - Dimension constraint + Contraintes des dimensions @@ -4179,11 +4187,11 @@ Cela nécessite de re-rentrer en mode édition pour que cela prenne effet. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Sélectionner le type de contraintes de dimension pour votre barre d'outils : +"Outil unique" : un seul outil pour toutes les contraintes de dimension dans la barre d'outils : Distance, Distance X/Y, Angle, Rayon. (Autres dans le menu déroulant) +"Outils séparés" : outils individuels pour chaque contrainte de dimension. +"Les deux" : à la fois l'outil de "Dimension" et les outils séparés. +Ce paramètre ne concerne que la barre d'outils. Quel que soit votre choix, tous les outils sont toujours disponibles dans le menu et par l'intermédiaire des raccourcis. @@ -4191,10 +4199,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Lorsque vous utilisez l'outil Contrainte de dimension, vous pouvez choisir comment manipuler des cercles et des arcs : +"Automatique" : l'outil appliquera le rayon aux arcs et au diamètre aux cercles. +"Diamètre" : l'outil appliquera le diamètre à la fois aux arcs et aux cercles. +"Rayon" : l'outil appliquera le rayon aux arcs et aux cercles. @@ -4204,7 +4212,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + Paramètres dans la vue : @@ -4222,10 +4230,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Disabled': On-View-Parameters are completely disabled. 'Only dimensional': Only dimensional On-View-Parameters are visible. They are the most useful. For example the radius of a circle. 'All': Both dimensional and positional On-View-Parameters. Positionals are the (x,y) position of the cursor. For example for the center of a circle. - Choisir un mode de visibilité pour les paramètres d'affichage : -"Désactivé" : les paramètres d'affichage sont complètement désactivés. -"Dimensions seulement" : seuls les paramètres des dimensions sont visibles. Ce sont les plus utiles. Par exemple, le rayon d'un cercle. -"Tous" : les paramètres des dimensions et des positions sont visibles. Les paramètres des positions correspondent aux positions (X, Y) du curseur. Par exemple, le centre d'un cercle. + Choisir un mode de visibilité pour les paramètres dans la vue : +"Désactivé" : les paramètres dans la vue sont complètement désactivés. +"Dimensions seulement" : seuls les paramètres dans la vue des dimensions sont visibles. Ce sont les plus utiles. Par exemple, le rayon d'un cercle. +"Tous" : les paramètres dans la vue des dimensions et des positions sont visibles. Les paramètres des positions correspondent aux positions (X, Y) du curseur. Par exemple, le centre d'un cercle. @@ -4283,7 +4291,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always Sketch editing - Édition d'esquisse + Édition des esquisses @@ -4370,7 +4378,7 @@ Supporte tous les systèmes d'unité sauf les "unités de mesure américaines" e If checked, displays the name on dimensional constraints (if exists). - Si cette case est cochée, elle affiche le nom des contraintes de dimension (si elles existent). + Si cette option est cochée, cela affichera le nom des contraintes de dimension (si elles existent). @@ -4956,7 +4964,7 @@ Cette erreur est purement basée sur la forme topologique de l'esquisse et non s If checked, construction geometries are ignored in the search - Si coché, les géométries de construction sont ignorées dans la recherche + Si cette option est cochée, les géométries de construction seront ignorées dans la recherche. @@ -5053,7 +5061,7 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Enables/updates constraint orientation locking - Active/met à jour le verrouillage d'orientation des contraintes + Activer/metre à jour le verrouillage d'orientation des contraintes @@ -5063,7 +5071,7 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Disables constraint orientation locking - Désactive le verrouillage d'orientation des contraintes + Désactiver le verrouillage d'orientation des contraintes @@ -5074,112 +5082,112 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. SketcherGui::ViewProviderSketch - + Edit sketch Modifier une esquisse - + A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches - + Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? - + Invalid sketch Esquisse non valide - + Do you want to open the sketch validation tool? Voulez-vous ouvrir l'outil de validation d'esquisse ? - + The sketch is invalid and cannot be edited. L'esquisse n'est pas valide et ne peut pas être éditée. - + Please remove the following constraint: Veuillez supprimer la contrainte suivante : - + Please remove at least one of the following constraints: Veuillez supprimer au moins une des contraintes suivantes : - + Please remove the following redundant constraint: Veuillez supprimer la contrainte redondante suivante : - + Please remove the following redundant constraints: Veuillez supprimer les contraintes redondantes suivantes : - + The following constraint is partially redundant: La contrainte suivante est partiellement redondante : - + The following constraints are partially redundant: Les contraintes suivantes sont partiellement redondantes : - + Please remove the following malformed constraint: Veuillez supprimer la contrainte malformée suivante : - + Please remove the following malformed constraints: Veuillez supprimer les contraintes malformées suivantes : - + Empty sketch Esquisse vide - + Over-constrained: L'esquisse comporte trop de contraintes : - + Malformed constraints: Contraintes mal formées : - + Redundant constraints: Contraintes redondantes : - + Partially redundant: Contraintes partiellement redondantes : - + Solver failed to converge Le solveur n'a pas pu converger - + Under constrained: L'esquisse manque de contraintes : - + %n DoF(s) %n Degré(s) de liberté @@ -5187,7 +5195,7 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. - + Fully constrained Esquisse entièrement contrainte @@ -5258,8 +5266,8 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Créer un clone de la géométrie en prenant comme référence le dernier point sélectionné @@ -5267,17 +5275,17 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_CompCopy - + Clone Cloner - + Copy Copier - + Move Déplacer @@ -5285,8 +5293,8 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixer le diamètre d'un cercle ou d'un arc @@ -5294,8 +5302,8 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fixer le rayon/diamètre d'un arc ou d'un cercle @@ -5303,8 +5311,8 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -5312,8 +5320,8 @@ Cela est fait en analysant les géométries et les contraintes de l'esquisse. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Créer une copie simple de la géométrie en prenant comme référence le dernier point sélectionné @@ -5598,8 +5606,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Déplace la géométrie en prenant comme référence le dernier point sélectionné @@ -5923,7 +5931,7 @@ L'algorithme Eigen Sparse QR est optimisé pour les matrices peu denses, génér ViewProviderSketch - + and %1 more et %1 de plus @@ -5978,7 +5986,7 @@ L'algorithme Eigen Sparse QR est optimisé pour les matrices peu denses, génér Sketcher edit tools - Outils d'édition d'esquisse + Outils d'édition des esquisses @@ -6153,64 +6161,65 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Erreur - + Failed to delete all geometry Impossible de supprimer toute la géométrie - + Failed to delete all constraints Impossible de supprimer toutes les contraintes - - + + Invalid selection Sélection non valide - + Selection has no valid geometries. La sélection n'a pas de géométrie valide. - + Selection has no valid geometries. BSplines, Points are not supported yet. La sélection n'a pas de géométrie valide. Les B-splines, les points ne sont pas encore pris en charge. @@ -6220,18 +6229,18 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p La contrainte a des informations d'index non valides et est mal formée. - - - - - - - + + + + + + + Invalid Constraint Contrainte invalide @@ -6271,8 +6280,8 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Erreur lors de la création d'un pôle de B-spline - + Error creating B-spline Erreur lors de la création d'une B-spline @@ -6328,16 +6337,17 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Impossible d'ajouter une ligne - - - - - - - - + + + + + + + + + Tool execution aborted L'exécution de l'outil a été interrompue @@ -6372,9 +6382,9 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Impossible d'ajuster une arête + - Value Error Erreur de valeur @@ -6426,7 +6436,12 @@ L'espacement de la grille est modifié s'il devient inférieur à ce nombre de p Failed to scale - Failed to scale + Échec de la mise à l'échelle + + + + Failed to translate + Failed to translate @@ -6586,7 +6601,7 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la Dimension - Contrainte de dimension + Dimension @@ -6618,7 +6633,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Dimension - Dimension + Contrainte de dimension @@ -6629,12 +6644,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. CmdSketcherConstrainRadius - + Constrain radius Contrainte de rayon - + Fix the radius of a circle or an arc Fixer le rayon d'un cercle ou d'un arc @@ -6751,12 +6766,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. CmdSketcherOffset - + Offset geometry Décaler la géométrie - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Décaler des géométries sélectionnées : une longueur de décalage positive fait que le décalage va vers l'extérieur, une longueur négative vers l'intérieur. @@ -6776,7 +6791,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + Il s'agit des contraintes liées aux données (par exemple, la distance). Si vous activez l'outil Cloner, l'outil copiera la donnée, sinon il tentera de les remplacer par des égalités. @@ -6889,12 +6904,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. CmdSketcherConstrainCoincidentUnified - + Constrain coincident Contrainte de coïncidence - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Créer une contrainte de coïncidence entre des points, ou fixe un point sur une arête, ou créer une contrainte concentrique entre des cercles, des arcs et des ellipses. @@ -6902,14 +6917,14 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. CmdSketcherRotate - + Polar transform - Pivoter + Créer une transformation polaire - + Rotate selected geometries, making n copies, enable creation of circular patterns. - Créer des motifs circulaires à partir de la rotation et de n copies de géométries sélectionnées. + Faire pivoter les géométries sélectionnées, faire n copies, permettre la création de motifs circulaires. @@ -6927,7 +6942,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Creating line - Création de ligne + Création de lignes @@ -7016,12 +7031,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Line pattern of normal edges. - Line pattern of normal edges. + Motif de ligne des arêtes normales. Width of normal edges. - Width of normal edges. + Largeur des arêtes normales. @@ -7041,12 +7056,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Line pattern of construction edges. - Line pattern of construction edges. + Motif des lignes des arêtes de construction. Width of construction edges. - Width of construction edges. + Largeur des arêtes de construction. @@ -7066,12 +7081,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + Motif des lignes des arêtes alignées internes. Width of internal aligned edges. - Width of internal aligned edges. + Largeur des arêtes alignés internes. @@ -7086,12 +7101,12 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Line pattern of external edges. - Line pattern of external edges. + Motif des lignes des arêtes externes. Width of external edges. - Width of external edges. + Largeur des arêtes externes. @@ -7189,7 +7204,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Nombre de copies (+ U / - J) @@ -7197,7 +7212,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Côtés (+ U / - J) @@ -7205,7 +7220,7 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Keep original geometries (U) - Keep original geometries (U) + Garder les géométries d'origine (U) @@ -7213,64 +7228,108 @@ Cliquez avec le bouton droit ou appuyez sur Échap pour annuler. Constrain - Constrain + Contrainte Constrain tools. - Constrain tools. + Outils de contrainte. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + C&opier dans l'esquisse - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Copier les géométries et les contraintes sélectionnées dans le presse-papiers CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + Co&uper dans l'esquisse - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Couper les géométries et les contraintes sélectionnées dans le presse-papiers CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + Co&ller dans l'esquisse - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Coller les géométries et les contraintes sélectionnées dans le presse-papiers CmdSketcherScale - + Scale transform - Scale transform + Mettre à l'échelle - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Mettre à l'échelle les géométries sélectionnées. Après avoir sélectionné le point central, vous pouvez : +- soit saisir le facteur d'échelle, +- soit sélectionner deux points de référence, puis le facteur d'échelle = longueur (p2-centre) / longueur (p1-centre). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Cloner les contraintes + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts index 8c5f88e026..f0f6c8191c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Fai un clon da xeometría collendo como referencia o último punto escolmado @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Constrinxir arco ou círculo - + Constrain an arc or a circle Constrinxir un arco ou un círculo - + Constrain radius Constrinxir raio - + Constrain diameter Constrixir diámetro - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Fai un clon da xeometría collendo como referencia o último punto escolmado @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Constrinxir o ángulo - + Fix the angle of a line or the angle between two lines Fixar o ángulo dunha liña ou o ángulo entre dúas liñas @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Constrinxir coincidentes - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Constrixir diámetro - + Fix the diameter of a circle or an arc Fixa o diámetro dun círculo ou arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Constrinxir a distancia - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixar a distancia horizontal entre dous puntos ou os cabos dunha liña @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixar a distancia vertical entre dous puntos ou os cabos dunha liña @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Constrinxir a igualdade - + Create an equality constraint between two lines or between circles and arcs Fai unha constrición de igualdade entre dúas liñas ou entre círculos e arcos @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Constrinxir o paralelismo - + Create a parallel constraint between two lines Fai unha constrición de paralelismo entre dúas liñas @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Constrinxir a perpendicularidade - + Create a perpendicular constraint between two lines Fai unha constrición de perpendicularidade entre dúas liñas @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Constrinxir un punto a un obxecto - + Fix a point onto an object Fixa un punto a un obxecto @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Constrinxir a simetría - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points @@ -602,12 +602,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Constrinxir a tanxencia - + Create a tangent constraint between two entities Fai unha constrición de tanxencia entre dúas entidades @@ -641,12 +641,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Copiar - + Creates a simple copy of the geometry taking as reference the last selected point Fai unha simple copia da xeometría collendo como referencia o último punto escolmado @@ -1031,12 +1031,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Delete all constraints - + Delete all constraints in the sketch Delete all constraints in the sketch @@ -1044,12 +1044,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1233,12 +1233,12 @@ as mirroring reference. CmdSketcherMove - + Move Mover - + Moves the geometry taking as reference the last selected point Mover a xeometría tomando coma referencia o último punto escolmado @@ -1259,12 +1259,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Matriz rectangular - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Fai un patrón de matriz rectangular da xeometría collendo as referencias do último punto escolmado @@ -1272,12 +1272,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1300,12 +1300,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Amosar/agochar xeometrías internas - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1313,8 +1313,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Select conflicting constraints @@ -1322,12 +1322,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1335,12 +1335,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1348,12 +1348,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1361,12 +1361,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Select horizontal axis - + Select the local horizontal axis of the sketch Select the local horizontal axis of the sketch @@ -1374,8 +1374,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1383,12 +1383,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Select the local origin point of the sketch @@ -1396,8 +1396,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Select partially redundant constraints @@ -1405,8 +1405,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Select redundant constraints @@ -1414,12 +1414,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Select vertical axis - + Select the local vertical axis of the sketch Select the local vertical axis of the sketch @@ -1466,12 +1466,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Simetría - + Creates symmetric geometry with respect to the last selected line or point Fai unha xeometría simétrica respecto da última liña ou punto escolmado @@ -1479,12 +1479,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Activates or deactivates the selected constraints @@ -1505,12 +1505,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1599,54 +1599,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1655,8 +1655,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Add length constraint @@ -1778,159 +1778,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Add perpendicular constraint - + Add perpendicularity constraint Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2101,47 +2101,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Copy/clone/move geometry - + Create copy of geometry Create copy of geometry - + Delete all geometry Delete all geometry - + Delete All Constraints Borrar Tódalas Constricións - + Remove Axes Alignment Remove Axes Alignment @@ -2159,8 +2159,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2175,22 +2175,22 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag Constraint Drag Constraint - + Modify sketch constraints Modify sketch constraints @@ -2229,6 +2229,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ invalid constraints, degenerated geometry, etc. Non xuntar - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Escolma errada @@ -2633,8 +2637,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Dobre constrición @@ -2650,8 +2654,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! O bordo escolmado xa ten constrición de Bloque! @@ -2663,7 +2667,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Escolmar vértices do esbozo. @@ -2688,29 +2692,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Escolmado dun bordo dende o esbozo. - + Select only edges from the sketch. Escolmado só de bordos dende esbozos. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Erro @@ -2725,75 +2729,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. No seu lugar aplicouse a tanxencia de punto final ao punto final. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Escolme unicamente unha liña, unha liña mais un punto ou dous puntos do esbozo. - + Cannot add a length constraint on an axis! Non se pode engadir unha constrición de lonxitude nun eixo! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Escolmar as cousas correctas do esbozo. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2803,93 +2807,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ningún dos puntos escolmados foron limitados nas curvas respectivas, ben porque son partes dun mesmo elemento, ou ben porque os dous son de xeometría externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Escolme unicamente unha liña ou ata dous puntos do esbozo. - + Cannot add a horizontal length constraint on an axis! Non se pode engadir unha constrición de lonxitude horizontal nun eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Non se pode engadir unha constrición de coordenada X no punto de orixe! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Non se pode engadir unha constrición de lonxitude vertical nun eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Non se pode engadir unha constrición de coordenada Y no punto de orixe! - + Select two or more lines from the sketch. Escolmar dúas ou máis liñas do esbozo. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Escolmar polo menos dúas liñas do esbozo. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2898,35 +2901,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas curvas mais un punto. - + Select some geometry from the sketch. perpendicular constraint Escolme algunha xeometría do esbozo. - - + + Cannot add a perpendicularity constraint at an unconnected point! Non se pode engadir unha constrición de perpendicularidade nun punto non conectado! - - + + One of the selected edges should be a line. Unha das arestas escolmadas debe de ser unha liña. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Aplicouse a tanxencia de punto final a punto final. Borrouse a constrición coincidente. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas curvas mais un punto. - + Select some geometry from the sketch. tangent constraint Escolme algunha xeometría do esbozo. - - - + + + Cannot add a tangency constraint at an unconnected point! Non se pode engadir unha constrición de tanxencia nun punto non conectado! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Cantidade incorrecta de obxectos escolmados! - - + + With 3 objects, there must be 2 curves and 1 point. Con 3 obxectos, debe de haber 2 curvas e 1 punto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Escolme un ou máis arcos ou círculos no esbozo. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. Esta constrición só aplica a arcos ou círculos. - - + + Select one or two lines from the sketch. Or select two edges and a point. Escolme unha ou dúas liñas do esbozo. Ou escolme un punto e dúas arestas. @@ -3010,88 +3013,88 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Unha constrición de ángulo non pode ser establecida por dúas liñas paralelas. - + Cannot add an angle constraint on an axis! Non se pode engadir unha constrición angular nun eixo! - + Select two edges from the sketch. Escolme dúas arestas do esbozo. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Igualdade para arista de B-Spline non compatible polo momento. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Escolme dous puntos e unha liña de simetría, dous puntos e un punto de simetría ou unha liña e un punto de simetría do esbozo. - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Non se pode engadir unha constrición de simetría entre unha liña e os seus puntos finais! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Os obxectos escolmados non son a xeometría dun esbozo unicamente. - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3113,9 +3116,9 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro do Kernel CAD @@ -3191,69 +3194,69 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Escolme elementos dun esbozo só. - + No constraint selected Ningunha constrición escolmada - + At least one constraint must be selected Débese escolmar polo menos unha constrición - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Unha construción simétrica require polo menos dous elementos xeométricos, sendo o último elemento xeométrico a referencia para construír a simetría. - + The last element must be a point or a line serving as reference for the symmetry construction. O último elemento debe de ser un punto ou unha liña, servindo como referencia para construír a simetría. - - + + A copy requires at least one selected non-external geometric element Unha copia require polo menos escolmar un elemento xeométrico non externo - + Delete All Geometry Borrar toda xeometría - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Borrar Tódalas Constricións - + Are you really sure you want to delete all the constraints? Estás certo de eliminar tódalas constricións? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3334,6 +3337,11 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Lonxitude: - + Refractive index ratio Índice de refracción - + Ratio n2/n1: Razón n2/n1: @@ -4065,13 +4073,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Crear matriz + Create regular polygon + Facer un polígono regular - Number of Sides: - Número de Lados: + Number of sides: + Number of sides: @@ -5075,112 +5083,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Esbozo non válido - + Do you want to open the sketch validation tool? Quere abrir a ferramenta de validación do esbozo? - + The sketch is invalid and cannot be edited. O esbozo non é válido e non se pode editar. - + Please remove the following constraint: Por favor, remova a seguinte constrición: - + Please remove at least one of the following constraints: Por favor, remova polo menos unha das seguintes constricións: - + Please remove the following redundant constraint: Por favor, remova a seguinte constrición redundante: - + Please remove the following redundant constraints: Por favor, remova a seguintes constricións redundantes: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Esbozo baleiro - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5188,7 +5196,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5259,8 +5267,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Fai un clon da xeometría collendo como referencia o último punto escolmado @@ -5268,17 +5276,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Clonar - + Copy Copiar - + Move Mover @@ -5286,8 +5294,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa o diámetro dun círculo ou arco @@ -5295,8 +5303,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5304,8 +5312,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa o raio dun círculo ou arco @@ -5313,8 +5321,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Fai unha simple copia da xeometría collendo como referencia o último punto escolmado @@ -5600,8 +5608,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mover a xeometría tomando coma referencia o último punto escolmado @@ -5925,7 +5933,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6155,64 +6163,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Erro - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Escolma non válida - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6222,18 +6231,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6273,8 +6282,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6330,16 +6339,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6374,9 +6384,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6430,6 +6440,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6629,12 +6644,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Constrinxir raio - + Fix the radius of a circle or an arc Fixa o raio dun círculo ou arco @@ -6751,12 +6766,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6889,12 +6904,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Constrinxir coincidentes - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6902,12 +6917,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7224,12 +7239,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7237,12 +7252,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7250,12 +7265,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7263,14 +7278,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index f2bdce083f..add3ee880c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -84,12 +84,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Stvara klon geometrije uzimajući kao referencu zadnje odabranu točku @@ -130,27 +130,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Ograničiti luk ili krug - + Constrain an arc or a circle Ograniči luk ili krug - + Constrain radius Ograniči radijus - + Constrain diameter Ograniči promjer - + Constrain auto radius/diameter Ograničiti automatski polumjer/promjer @@ -158,12 +158,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Stvara klon geometrije uzimajući kao referencu zadnje odabranu točku @@ -390,12 +390,12 @@ CmdSketcherConstrainAngle - + Constrain angle Ograniči kut - + Fix the angle of a line or the angle between two lines Fiksiraj kut linije ili kut između dvije linije @@ -416,12 +416,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Ograničiti zajedničko - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Stvorite koincidentno ograničenje između točaka ili koncentrično ograničenje između krugova, lukova i elipsa @@ -429,12 +429,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Ograniči promjer - + Fix the diameter of a circle or an arc Popravi promjer kruga ili luka @@ -442,12 +442,12 @@ CmdSketcherConstrainDistance - + Constrain distance Ograniči udaljenost - + Fix a length of a line or the distance between a line and a vertex or between two circles Namjestiti duljinu linije ili rastojanje između linije i tjemene točke ili rastojanje između dva kruga @@ -455,12 +455,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Ograniči horizontalnu udaljenost - + Fix the horizontal distance between two points or line ends Ograniči horizontalnu udaljenost između dvije točke ili krajeva linije @@ -468,12 +468,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Ograničenje okomite udaljenosti - + Fix the vertical distance between two points or line ends Ograniči vertikalnu udaljenost između dvije točke ili krajeva linije @@ -481,12 +481,12 @@ CmdSketcherConstrainEqual - + Constrain equal Ograniči jednaku duljinu - + Create an equality constraint between two lines or between circles and arcs Napravite ograničenje jednakosti između dvije linije ili između kružnica i lukova @@ -522,12 +522,12 @@ na odabranoj tjemenoj točki CmdSketcherConstrainParallel - + Constrain parallel Ograniči paralelno - + Create a parallel constraint between two lines Napravi paralelno ograničenje između dvije linije @@ -535,12 +535,12 @@ na odabranoj tjemenoj točki CmdSketcherConstrainPerpendicular - + Constrain perpendicular Ograniči okomito - + Create a perpendicular constraint between two lines Stvara okomito ograničenje između dvije linije @@ -548,12 +548,12 @@ na odabranoj tjemenoj točki CmdSketcherConstrainPointOnObject - + Constrain point onto object Ograniči točku na objekt - + Fix a point onto an object Fiksiraj točku na objekt @@ -561,12 +561,12 @@ na odabranoj tjemenoj točki CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Ograničiti automatski polumjer/promjer - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fiksirajte promjer ako je odabrana kružnica ili radijus ako je odabran luk/spline pol @@ -574,12 +574,12 @@ na odabranoj tjemenoj točki CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Ograniči lom (Snell's zakon ') - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Stvaranje zakona loma svijetla (Snell's law) ograničenje između dvije krajnje točke zrake i ruba kao sučelja. @@ -588,12 +588,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Ograniči simetrijski - + Create a symmetry constraint between two points with respect to a line or a third point Stvoriti simetrično ograničenje između dvije točke u odnosu na liniju ili treću točku @@ -602,12 +602,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Ograniči tangentno - + Create a tangent constraint between two entities Napravi tangentno ograničenje između dva entiteta @@ -641,12 +641,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Kopiraj - + Creates a simple copy of the geometry taking as reference the last selected point Stvara jednostavnu kopiju geometrije uzimajući kao referencu zadnje odabranu točku @@ -1031,12 +1031,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Brisanje svih ograničenja - + Delete all constraints in the sketch Brisanje svih ograničenja u skici @@ -1044,12 +1044,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Izbrisati sve geometrije - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Izbrisati sve geometrije i sva ograničenja u trenutnoj skici sa iznimkom vanjskih geometrija @@ -1237,12 +1237,12 @@ kao zrcalna referenca. CmdSketcherMove - + Move Pomicanje - + Moves the geometry taking as reference the last selected point Pomakni geometriju uzimajući kao referencu zadnje odabranu točku @@ -1263,12 +1263,12 @@ kao zrcalna referenca. CmdSketcherRectangularArray - + Rectangular array Pravokutna matrica. - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Stvara pravokutnu matricu uzorka geometrije uzimajući kao referencu zadnje odabranu točku @@ -1276,12 +1276,12 @@ kao zrcalna referenca. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Ukloni poravnanje osi - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modificira ograničenja radi uklanjanja poravnanja osi pokušavajući sačuvati odnos ograničenja odabira @@ -1304,12 +1304,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Pokaži/Sakrij unutarnju geometriju - + Show all internal geometry or hide unused internal geometry Pokaži sve unutarnje geometrije ili sakrij nekorištene unutarnje geometrije @@ -1317,8 +1317,8 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Odaberite sukobljena ograničenja @@ -1326,12 +1326,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectConstraints - + Select associated constraints Odaberite povezana ograničenja - + Select the constraints associated with the selected geometrical elements Odaberite ograničenja povezana sa odabranim geometrijskim elementima @@ -1339,12 +1339,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Odaberite povezane geometrije - + Select the geometrical elements associated with the selected constraints Odaberite geometrijske elemente povezane sa odabranim ograničenjima @@ -1352,12 +1352,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Odaberite neograničene stupnjeve slobode - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Odabir geometrijskih elemenata gdje alat za rješavanje (solver) još uvijek otkriva neograničene stupnjeve slobode. @@ -1365,12 +1365,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Odaberite vodoravnu os - + Select the local horizontal axis of the sketch Odaberite lokalnu vodoravnu os skice @@ -1380,8 +1380,8 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Odaberite deformirana ograničenja @@ -1389,12 +1389,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectOrigin - + Select origin Odaberite izvor - + Select the local origin point of the sketch Odaberite lokalnu početnu točku skice @@ -1404,8 +1404,8 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Odaberite djelomično suvišna ograničenja @@ -1413,8 +1413,8 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Odaberite suvišna ograničenja @@ -1422,12 +1422,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSelectVerticalAxis - + Select vertical axis Odaberite okomitu os - + Select the local vertical axis of the sketch Odaberite lokalnu okomitu os skice @@ -1476,12 +1476,12 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherSymmetry - + Symmetry Simetrija - + Creates symmetric geometry with respect to the last selected line or point Stvara simetrične geometrije u odnosu na zadnju odabranu liniju ili točku @@ -1489,14 +1489,14 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Prebaci aktivirati / isključiti ograničenje - + Activates or deactivates the selected constraints Uključuje ili isključuje odabrana ograničenja @@ -1517,14 +1517,14 @@ Ovo će očistiti svojstvo "Podrška", ako postoji. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Prebacuj vožnje / reference ograničenje - + Set the toolbar, or the selected constraints, into driving or reference mode Postavite alatnu traku ili odabrana ograničenja, @@ -1623,43 +1623,43 @@ nevaljana ograničenja, degenerirana geometrija itd. Dodajte fiksno ograničenje - + Add 'Block' constraint Dodajte 'Blok' ograničenje - + Add block constraint Dodaje blok ograničenje - - + + Add coincident constraint Dodajte podudarno ograničenje - - + + Add distance from horizontal axis constraint Dodajte udaljenost od ograničenja vodoravne osi - - + + Add distance from vertical axis constraint Dodajte udaljenost od ograničenja okomite osi - - + + Add point to point distance constraint Dodajte ograničenje udaljenosti od točke do točke @@ -1667,20 +1667,20 @@ nevaljana ograničenja, degenerirana geometrija itd. - - + + Add point to line Distance constraint Dodaj ograničenje udaljenosti od točke do linije - - + + Add circle to circle distance constraint Dodaj ograničenje između dva kruga - + Add circle to line distance constraint Dodaj ograničenje između kruga i linije @@ -1689,8 +1689,8 @@ nevaljana ograničenja, degenerirana geometrija itd. - - + + Add length constraint Dodajte ograničenje duljine @@ -1814,162 +1814,162 @@ nevaljana ograničenja, degenerirana geometrija itd. Dodajte ograničenje udaljenosti Y - + Add point to circle Distance constraint Dodaj ograničenje udaljenosti od točke do kružnice - - + + Add point on object constraint Dodajte ograničenje udaljenosti točka na objektu - - + + Add point to point horizontal distance constraint Dodajte ograničenje vodoravne udaljenosti od točke do točke - + Add fixed x-coordinate constraint Dodajte fiksno x-koordinata ograničenje - - + + Add point to point vertical distance constraint Dodajte ograničenje okomite udaljenosti od točke do točke - + Add fixed y-coordinate constraint Dodajte fiksno y-koordinata ograničenje - - + + Add parallel constraint Dodajte paralelno ograničenje - - - - - - - + + + + + + + Add perpendicular constraint Dodajte vertikalno ograničenje - + Add perpendicularity constraint Dodajte vertikalno ograničenje - + Swap coincident+tangency with ptp tangency Zamijeni slučajnost + tangencija s ptp tangencijom - + Swap PointOnObject+tangency with point to curve tangency Zamijenite točka na objektu+dodiruje s točka na krivulji dodiruje - - - - - - - + + + + + + + Add tangent constraint Dodajte tangencijalno ograničenje - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Dodajte točku tangencijalno ograničenje - - - - + + + + Add radius constraint Dodajte ograničenje polumjera - - - - + + + + Add diameter constraint Dodajte ograničenje promjera - - - - + + + + Add radiam constraint Dodaj polumjer-promjer ograničenje - - - - + + + + Add angle constraint Dodajte ograničenje kuta - - + + Add equality constraint Dodajte ograničenje jednakosti - - - - - + + + + + Add symmetric constraint Dodajte ograničenje simetrije - + Add Snell's law constraint Dodajte ograničenje Snell's law - + Toggle constraint to driving/reference Uključivanje ograničenja na pogon / referencu - + Activate/Deactivate constraint Aktiviranje / deaktiviranje ograničenja @@ -2149,53 +2149,53 @@ nevaljana ograničenja, degenerirana geometrija itd. Spoji krivulje - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Izlaganje unutarnje geometrije - + Create symmetric geometry Stvaranje simetrične geometrije - + Copy/clone/move geometry Kopiraj / kloniraj / pomakni geometriju - + Create copy of geometry Stvori kopiju geometrije - + Delete all geometry Izbrisati sve geometrije - + Delete All Constraints Brisanje svih ograničenja - + Remove Axes Alignment Ukloni poravnanje osi @@ -2217,8 +2217,8 @@ nevaljana ograničenja, degenerirana geometrija itd. - + Add auto constraints Dodajte automatska ograničenja @@ -2233,24 +2233,24 @@ nevaljana ograničenja, degenerirana geometrija itd. Preimenujte ograničenja skica - + Drag Point Povucite točku - + Drag Curve Povucite krivulju - + Drag Constraint Povucite ograničenje - + Modify sketch constraints Izmijenite ograničenja skica @@ -2289,6 +2289,11 @@ nevaljana ograničenja, degenerirana geometrija itd. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2395,16 +2400,16 @@ nevaljana ograničenja, degenerirana geometrija itd. Čvor se ne može umetnuti izvan raspona parametara BSpline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Indeks parametra Dodatka alata izvan dometa @@ -2470,20 +2475,8 @@ nevaljana ograničenja, degenerirana geometrija itd. Nemoj pridodati - - - - - - - - - - - - @@ -2494,133 +2487,144 @@ nevaljana ograničenja, degenerirana geometrija itd. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Pogrešan odabir @@ -2695,8 +2699,8 @@ nevaljana ograničenja, degenerirana geometrija itd. - - + + Double constraint Ograničenje dvaput @@ -2712,8 +2716,8 @@ nevaljana ograničenja, degenerirana geometrija itd. - - + + The selected edge already has a Block constraint! Odabrani rub već ima blok ograničenje! @@ -2725,7 +2729,7 @@ nevaljana ograničenja, degenerirana geometrija itd. - + Select vertices from the sketch. Odaberite samo vrhove sa skice. @@ -2750,29 +2754,29 @@ nevaljana ograničenja, degenerirana geometrija itd. Blok ograničenja ne može biti dodan ako skica nije riješena ili postoje redundantna i/ili proturječna ograničenja. - + Select one edge from the sketch. Odaberite jedan rub skice. - + Select only edges from the sketch. Odaberite samo rubove sa skice. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Broj odabranih objekata nije 3 + - Error Pogreška @@ -2787,75 +2791,75 @@ nevaljana ograničenja, degenerirana geometrija itd. Odabrani predmet(i) ne mogu prihvatiti vodoravno ili uspravno ograničenje! - + Endpoint to endpoint tangency was applied instead. Tangenta od krajnje točka do krajnje točke je primijenjena umjesto toga. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Odaberite dva ili više vrhova sa skice za koincidentno ograničenje, ili dva ili više krugova, elipsa, lukova ili lukova elipse za koncentrično ograničenje. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Odaberite dva vrha sa skice za koincidentno ograničenje ili dva kruga, elipse, lukove ili lukove elipse za koncentrično ograničenje. - + Select exactly one line or one point and one line or two points from the sketch. Odaberite točno jednu liniju ili jednu točku i jednu liniju ili dvije točke iz skice. - + Cannot add a length constraint on an axis! Ne možete dodati ograničenje duljine na osi! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Izaberi točno jednu liniju ili jednu točku i jednu liniju ili dvije točke ili dva kruga na skici. - + This constraint does not make sense for non-linear curves. Ovo ograničenje nema smisla za nelinearne krivulje. - + Endpoint to edge tangency was applied instead. Tangenta od krajnje točka do ruba je primijenjena umjesto toga. - - - - - - + + + + + + Select the right things from the sketch. Odaberite prave stvari sa skice. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Odaberite rub koji nije težina B-krive. @@ -2866,95 +2870,94 @@ nevaljana ograničenja, degenerirana geometrija itd. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Odaberite nekoliko točaka ili nekoliko konusa za koncentricitet. - + Select either one point and several curves, or one curve and several points Izaberi ili jednu točku i nekoliko krivulja, ili jednu krivulju i nekoliko točaka - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Izaberite jednu točku i nekoliko krivulja ili jednu krivulju i nekoliko točaka za točkaNaObjktu, ili nekoliko točaka za podudarnost, ili nekoliko konusa za koncentričnost. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Nijedna od odabranih točaka nije ograničena na dotične krivulje, jer su dijelovi istog elementa, jer su obje vanjska geometrija ili zato što rub ne ispunjava uvjete. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nijedna od odabranih točaka nije bila je ograničena na dotične krivulje, ili su dijelovi isti element, ili su oba vanjske geometrije. - + Cannot add a length constraint on this selection! Ne mogu dodati ograničenje duljine na ovaj odabir! - - - - + + + + Select exactly one line or up to two points from the sketch. Odaberite točno jednu liniju ili do dvije točke iz skice. - + Cannot add a horizontal length constraint on an axis! Nemoguće je dodati ograničenje duljine na os! - + Cannot add a fixed x-coordinate constraint on the origin point! Nije moguće dodati fiksno ograničenje X koordinate na izvornu točku! - - + + This constraint only makes sense on a line segment or a pair of points. Ovo ograničenje samo ima smisla na segmentu crte ili paru točaka. - + Cannot add a vertical length constraint on an axis! Nemoguće je dodati ograničenje duljine na os! - + Cannot add a fixed y-coordinate constraint on the origin point! Nije moguće dodati fiksno ograničenje Y koordinate na izvornu točku! - + Select two or more lines from the sketch. Odaberite dvije ili više linija iz skice. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Odaberite barem dvije linije iz skice. - - Select a valid line. - Odaberite ispravnu liniju. - - - - + The selected edge is not a valid line. Odabrani rub nije valjana linija. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2964,35 +2967,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije krajnje točke; dvije krivulje i točka. - + Select some geometry from the sketch. perpendicular constraint Odaberite neke geometrije sa skice. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nemoguće je postaviti okomicu na nepovezanoj točki! - - + + One of the selected edges should be a line. Jedan od doabranih rubova bi trebala biti linija. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Primijenjena je tangenta krajnja točka do krajnje točke. Podudarna ograničenja su izbrisana. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Primijenjena je tangenta krajnja točka do ruba. Točka na objekt ograničenja su izbrisana. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -3002,69 +3005,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije krajnje točke; dvije krivulje i točka. - + Select some geometry from the sketch. tangent constraint Odaberite neke geometrije sa skice. - - - + + + Cannot add a tangency constraint at an unconnected point! Nemoguće je postaviti tangentu u nepovezanoj točki! - - + + Tangent constraint at B-spline knot is only supported with lines! Ograničenje tangente na B-krivulja čvoru podržano je samo s linijama! - + B-spline knot to endpoint tangency was applied instead. B-krivulja od krajnje točka do krajnje točke je primijenjena umjesto toga. - - + + Wrong number of selected objects! Pogrešan broj odabranih objekata! - - + + With 3 objects, there must be 2 curves and 1 point. Sa 3 objekta, ondje mora biti 2 krivulje i 1 točka. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Odaberite jedan ili više lukova ili krugovima iz skice. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Odaberite samo jedan ili više B-Spline stupova ili samo jedan ili više lukova ili krugova sa skice, ali ne i mejšano. - - - + + + Constraint only applies to arcs or circles. Ograničenje se odnosi samo na lukove i krugove. - - + + Select one or two lines from the sketch. Or select two edges and a point. Odaberite jednu ili dvije linije na skici. Ili odaberite dva ruba i točku. @@ -3079,50 +3082,50 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Kut ograničenje ne može se postaviti za dvije paralelne linije. - + Cannot add an angle constraint on an axis! Nemoguće je dodati ograničenje kuta osi! - + Select two edges from the sketch. Odaberite dva ruba iz skice. - + Select two or more compatible edges. Odaberite dva ili više kompatibilnih rubova. - + Sketch axes cannot be used in equality constraints. Osi skice ne mogu se koristiti u ograničenjima jednakosti. - + Equality for B-spline edge currently unsupported. Izjednačavanje na rub B-Spline krive trenutno nije podržano. - - - + + + Select two or more edges of similar type. Odaberite dva ili više rubova sličnog tipa. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Odaberite dvije točke i liniju simetrije, dvije točke i točku simetrije ili liniju i točku simetrije iz skice. - - + + Cannot add a symmetry constraint between a line and its end points. Nije moguće dodati ograničenje simetrije između crte i njenih krajnjih točaka. @@ -3131,38 +3134,38 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije - - + + Cannot add a symmetry constraint between a line and its end points! Nemoguće je postaviti simetriju između linije i njenih vrhova! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Odaberite dvije krajnje točke linije kao zrake, rub predstavlja granicu. Prva odabrana točka odgovara indeksu n1, druga indeksu n2 a vrijednost polazišta postavlja omjer na n2/n1. - + Selected objects are not just geometry from one sketch. Odabrani objekti nisu samo geometrije iz jedne skice. - + Cannot create constraint with external geometry only. Ne možete stvoriti ograničenja samo s vanjskom geometrijom. - + Incompatible geometry is selected. Nespojiva geometrije je odabrana. + - - - - + + + Select constraints from the sketch. Odaberite ograničenja sa skice. @@ -3186,9 +3189,9 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije - + CAD Kernel Error CAD Kernel greška @@ -3266,69 +3269,69 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Treba odabrati dvije krajnje točke ili točku koja se podudara. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Odaberite elemente iz jedne skice. - + No constraint selected Nema odabranoga ograničenja - + At least one constraint must be selected Morate odabrati barem jedno ograničenje - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Simetrična konstrukcija zahtijeva najmanje dva geometrijska elemenata, posljednji geometrijski element je referenca za simetriju konstrukcije. - + The last element must be a point or a line serving as reference for the symmetry construction. Posljednji element mora biti točka ili crta koja služi kao referenca za simetriju konstrukcije. - - + + A copy requires at least one selected non-external geometric element Kopija zahtijeva barem jedan odabrani ne-vanjski geometrijski element - + Delete All Geometry Izbrisati sve geometrije - + Are you really sure you want to delete all geometry and constraints? Jesi li zaista sigurni da želite izbrisati sve geometrije i ograničenja? - + Delete All Constraints Brisanje svih ograničenja - + Are you really sure you want to delete all the constraints? Jesi li zaista sigurni da želite izbrisati sva ograničenja? - + Removal of axes alignment requires at least one selected non-external geometric element Uklanjanje poravnanja osi zahtijeva najmanje jedan odabrani ne-vanjski geometrijski element @@ -3409,6 +3412,11 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3719,12 +3727,12 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Duljina: - + Refractive index ratio Omjer indeksa loma - + Ratio n2/n1: Omjer n2/n1: @@ -4146,13 +4154,13 @@ izravno odražava na kopijama SketcherGui::SketcherRegularPolygonDialog - Create array - Stvori matricu + Create regular polygon + Stvorite pravilan višekutnik - Number of Sides: - Broj strana: + Number of sides: + Number of sides: @@ -5178,112 +5186,112 @@ To se radi analizom geometrije i ograničenja skice. SketcherGui::ViewProviderSketch - + Edit sketch Uredi skicu - + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? - + Invalid sketch Neispravna skica - + Do you want to open the sketch validation tool? Želite li otvoriti alat provjera valjanosti skice? - + The sketch is invalid and cannot be edited. Skica je neispravna i ne može se uređivati. - + Please remove the following constraint: Molim uklonite sljedeće ograničenje: - + Please remove at least one of the following constraints: Molim uklonite barem jedno od sljedećih ograničenja: - + Please remove the following redundant constraint: Molimo obrišite ovo redundantno ograničenje: - + Please remove the following redundant constraints: Molimo obrišite ova redundantna ograničenja: - + The following constraint is partially redundant: Sljedeće ograničenje je djelomično suvišno: - + The following constraints are partially redundant: Sljedeća ograničenja su djelomično suvišna: - + Please remove the following malformed constraint: Uklonite sljedeće deformirano ograničenje: - + Please remove the following malformed constraints: Uklonite sljedeća deformirana ograničenja: - + Empty sketch Prazan skica - + Over-constrained: Pretjerano ograničeno: - + Malformed constraints: Deformirana ograničenja: - + Redundant constraints: Suvišna ograničenja: - + Partially redundant: Djelomično suvišno: - + Solver failed to converge Solver nije uspio konvergirati - + Under constrained: Premalo ograničen: - + %n DoF(s) %n Stupanj slobode @@ -5292,7 +5300,7 @@ To se radi analizom geometrije i ograničenja skice. - + Fully constrained Potpuno ograničen @@ -5365,8 +5373,8 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Stvara klon geometrije uzimajući kao referencu zadnje odabranu točku @@ -5374,17 +5382,17 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_CompCopy - + Clone Klon - + Copy Kopiraj - + Move Pomicanje @@ -5392,8 +5400,8 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Popravi promjer kruga ili luka @@ -5401,8 +5409,8 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Popravi polumjer/promjer kruga ili luka @@ -5410,8 +5418,8 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fiksiraj radijus kruga ili luka @@ -5419,8 +5427,8 @@ To se radi analizom geometrije i ograničenja skice. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Stvara jednostavnu kopiju geometrije uzimajući kao referencu zadnje odabranu točku @@ -5705,8 +5713,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Pomakni geometriju uzimajući kao referencu zadnje odabranu točku @@ -6048,7 +6056,7 @@ Eigen Sparse QR algoritam optimiziran je za rijetke matrice; obično brže ViewProviderSketch - + and %1 more i %1 još @@ -6282,64 +6290,65 @@ Razmak mreže se mijenja ako postane manji od ovog broja piksela. Parabole su migrirane. Migrirane datoteke neće se otvoriti u prethodnim verzijama FreeCAD-a!! - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Pogreška - + Failed to delete all geometry Nije uspjelo brisanje svih geometrija - + Failed to delete all constraints Nije uspjelo brisanje svih ograničenja - - + + Invalid selection Nevažeći odabir - + Selection has no valid geometries. Odabir nema valjane geometrije. - + Selection has no valid geometries. BSplines, Points are not supported yet. Odabrana područja nemaju važeće geometrije. B-splineovi i točke još nisu podržani. @@ -6349,18 +6358,18 @@ Razmak mreže se mijenja ako postane manji od ovog broja piksela. Ograničenje ima neispravnu index informaciju i neispravno je. - - - - - - - + + + + + + + Invalid Constraint Neispravno ograničenje @@ -6400,8 +6409,8 @@ Razmak mreže se mijenja ako postane manji od ovog broja piksela. Greška stvaranja pola B-krivulje - + Error creating B-spline Greška stvaranja B-krivulje @@ -6458,16 +6467,17 @@ Greška kod brisanja zadnjeg pola B-krive Nije uspjelo dodavanje linije - - - - - - - - + + + + + + + + + Tool execution aborted Prekinuto izvršavanje alata @@ -6502,9 +6512,9 @@ Greška kod brisanja zadnjeg pola B-krive Nije uspjelo skraćivanje ruba + - Value Error Greška vrijednosti @@ -6558,6 +6568,11 @@ Greška kod brisanja zadnjeg pola B-krive Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6758,12 +6773,12 @@ Alati dimenzija. CmdSketcherConstrainRadius - + Constrain radius Ograniči radijus - + Fix the radius of a circle or an arc Fiksiraj radijus kruga ili luka @@ -6880,12 +6895,12 @@ Alati dimenzija. CmdSketcherOffset - + Offset geometry Geometrija pomaka - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Pomak odabranih geometrija. Pozitivni pomak čini to prema van negativni prema unutra. @@ -7018,12 +7033,12 @@ Alati dimenzija. CmdSketcherConstrainCoincidentUnified - + Constrain coincident Ograničiti zajedničko - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Stvorite koincidentno ograničenje između točaka ili učvrstite točku na jedan rub, ili koncentrično ograničenje između krugova, lukova i elipsa @@ -7031,12 +7046,12 @@ Alati dimenzija. CmdSketcherRotate - + Polar transform Polarna transformacija - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotiranje odabranih geometrija, stvarajući n kopija, omogućuje stvaranje kružnih uzoraka. @@ -7361,12 +7376,12 @@ Alati dimenzija. CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7374,12 +7389,12 @@ Alati dimenzija. CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7387,12 +7402,12 @@ Alati dimenzija. CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7400,14 +7415,56 @@ Alati dimenzija. CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Kloniraj ograničenja + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index 7bdc052562..b6ee06ab56 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klónozás - + Creates a clone of the geometry taking as reference the last selected point Létrehoz egy geometria klónt az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Kör vagy körív kényszer - + Constrain an arc or a circle Egy kör vagy körív kényszerítése - + Constrain radius Sugár illesztés - + Constrain diameter Átmérő kényszer - + Constrain auto radius/diameter Kényszeríti az automatikus sugarat/átmérőt @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klónozás - + Creates a clone of the geometry taking as reference the last selected point Létrehoz egy geometria klónt az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Szög zárolása - + Fix the angle of a line or the angle between two lines Rögzítsen szöget a vonalon, vagy a szöget két vonalon @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Egymásra llesztés - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Konvergens kényszer létrehozása pontok között vagy koncentrikus kötés létrehozása körök, ívek és ellipszisek között @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Átmérő kényszer - + Fix the diameter of a circle or an arc Rögzíteni egy kör vagy egy ív átmérőjét @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Távolság kényszer - + Fix a length of a line or the distance between a line and a vertex or between two circles Vonal hosszának rögzítése vagy adott távolság tartása két kör között @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Vízszintes távolság zárolása - + Fix the horizontal distance between two points or line ends Két pont közötti vagy vonal végek közötti vízszintes távolság zárolása @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Függőleges távolság kényszerítése - + Fix the vertical distance between two points or line ends Két pont közötti vagy vonal végek közötti függőleges távolság zárolása @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Illesztás megtartása - + Create an equality constraint between two lines or between circles and arcs Hozzon létre egy egyenlőség illesztést két vonal között, illetve körök és ívek között @@ -520,12 +520,12 @@ a kijelölt csúcsponton CmdSketcherConstrainParallel - + Constrain parallel Párhuzamosság tartása - + Create a parallel constraint between two lines Két vonal közötti párhuzamos kényszerítés @@ -533,12 +533,12 @@ a kijelölt csúcsponton CmdSketcherConstrainPerpendicular - + Constrain perpendicular Merőleges illesztés - + Create a perpendicular constraint between two lines Merőleges illesztést hoz létre két vonal közt @@ -546,12 +546,12 @@ a kijelölt csúcsponton CmdSketcherConstrainPointOnObject - + Constrain point onto object A pont illesztése a tárgyra - + Fix a point onto an object Pont rögzítése egy tárgyra @@ -559,12 +559,12 @@ a kijelölt csúcsponton CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Kényszeríti az automatikus sugarat/átmérőt - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Beállítja az átmérőt kör kiválasztásakor, illetve a sugarat, ha ív/görbe pólus van kiválasztva @@ -572,12 +572,12 @@ a kijelölt csúcsponton CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Illesztés törésmutatója (Snellius–Descartes-törvény) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Hozzon létre egy fénytörés törvény (Snellius-törvény) kényszerítést sugarak két végpontja között és egy élt mint határfelületet. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Szimmetria illesztés - + Create a symmetry constraint between two points with respect to a line or a third point Állítsa be a szimmetriát két pont között egy vonalhoz vagy egy harmadik ponthoz képest @@ -600,12 +600,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Érintő illesztés - + Create a tangent constraint between two entities Hozzon létre egy érintő illesztést két rész között @@ -639,12 +639,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Másolás - + Creates a simple copy of the geometry taking as reference the last selected point Egyszerű geometria másolatot hoz létre, az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -1029,12 +1029,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Töröl minden kényszerítést - + Delete all constraints in the sketch A vázlat összes kényszerítésének törlése @@ -1042,12 +1042,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Minden geometria törlése - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Az összes geometria és kényszer törlése az aktuális vázlatból a külső geometria kivételével @@ -1220,7 +1220,7 @@ mint tükörreferencia hivatkozás. Wrong selection - Rossz kijelölés + Hibás kijelölés @@ -1231,12 +1231,12 @@ mint tükörreferencia hivatkozás. CmdSketcherMove - + Move Mozgat - + Moves the geometry taking as reference the last selected point Mozgatja a geometriát az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -1257,12 +1257,12 @@ mint tükörreferencia hivatkozás. CmdSketcherRectangularArray - + Rectangular array Négyszögletes elrendezés - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Létrehoz egy téglalap alakú tömb mintát a geometriáról, az utolsó kijelölt referenciapont figyelembe vételével @@ -1270,12 +1270,12 @@ mint tükörreferencia hivatkozás. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Tengelyek igazításának eltávolítása - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Módosítja a kényszerítéseket a tengelyek igazításának eltávolításához, miközben megpróbálja megőrizni a kijelölés kényszerkapcsolatát @@ -1298,12 +1298,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Belső geometria megjelenítése/elrejtése - + Show all internal geometry or hide unused internal geometry Minden belső geometria megjelenítése vagy a fel nem használt belső geometriája elrejtése @@ -1311,8 +1311,8 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Szabálytalan kényszerítések kiválasztása @@ -1320,12 +1320,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectConstraints - + Select associated constraints Kapcsolódó kényszerítések kiválasztása - + Select the constraints associated with the selected geometrical elements A kijelölt geometriai elemekhez tartozó kényszerek kiválasztása @@ -1333,12 +1333,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Kapcsolódó geometria kiválasztása - + Select the geometrical elements associated with the selected constraints A kijelölt kényszerítésekhez társított geometriai entitások kiválasztása @@ -1346,12 +1346,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Meghatározatlan szabadságfok kiválasztása - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Válassza ki azokat a geometriai elemeket, amelyeknél a megoldó még nem ismer fel bizonyos szabadságfokokat. @@ -1359,12 +1359,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Vízszintes tengely kijelölése - + Select the local horizontal axis of the sketch A vázlat helyi vízszintes tengelyének kijelölése @@ -1372,8 +1372,8 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Hibás kényszerítések kijelölése @@ -1381,12 +1381,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectOrigin - + Select origin Kezdőpont kijelölése - + Select the local origin point of the sketch A vázlat helyi kezdőpontjának kiválasztása @@ -1394,8 +1394,8 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Részlegesen felesleges kényszerítések kiválasztása @@ -1403,8 +1403,8 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Felesleges kényszerítések kiválasztása @@ -1412,12 +1412,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSelectVerticalAxis - + Select vertical axis Függőleges tengely kijelölése - + Select the local vertical axis of the sketch A vázlat helyi függőleges tengelyének kijelölése @@ -1464,12 +1464,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherSymmetry - + Symmetry Szimmetria - + Creates symmetric geometry with respect to the last selected line or point Létrehozza az utolsó kijelölt vonal vagy pont geometriai szimmetriáját @@ -1477,12 +1477,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Kényszerítés bekapcsolása/kikapcsolása - + Activates or deactivates the selected constraints A kijelölt kényszerítések engedélyezése vagy letiltása @@ -1503,12 +1503,12 @@ A 'Támogatás' tulajdonság törlődik, ha van. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Kényszerítés váltása a meghatározott és a megjelenített között - + Set the toolbar, or the selected constraints, into driving or reference mode Állítsa be az eszköztárat vagy a kijelölt kényszerítéseket, @@ -1597,54 +1597,54 @@ invalid constraints, degenerated geometry, etc. Rögzített kényszerítést ad hozzá - + Add 'Block' constraint 'Blokk' kényszerítés hozzáadása - + Add block constraint Blokk kényszerítés hozzáadása - - + + Add coincident constraint Véletlenszerű kényszerítés hozzáadása - - + + Add distance from horizontal axis constraint Vízszintes tengelymegkötéstől való távolság hozzáadása - - + + Add distance from vertical axis constraint Függőleges tengelymegkötéstől való távolság hozzáadása - - + + Add point to point distance constraint Ponttól pontig távolság kényszerítést ad hozzá - - + + Add point to line Distance constraint Ponttól a vonalig távolság kényszerítést ad hozzá - - + + Add circle to circle distance constraint Kör hozzáadása a kör távolsági kényszerítéséhez - + Add circle to line distance constraint Kör hozzáadása a vonal távolsági kényszerítéséhez @@ -1653,8 +1653,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Hossz kényszerítés hozzáadása @@ -1776,159 +1776,159 @@ invalid constraints, degenerated geometry, etc. Y távolság kényszerítés hozzáadása - + Add point to circle Distance constraint Ponttól a körig távolság kényszerítés hozzáadása - - + + Add point on object constraint Pont a tárgyon kényszerítés hozzáadása - - + + Add point to point horizontal distance constraint Ponttól pontig vízszintes távolság kényszerítés hozzáadása - + Add fixed x-coordinate constraint Rögzített x-koordináta kényszerítés hozzáadása - - + + Add point to point vertical distance constraint Ponttól pontig függőleges távolság kényszerítés hozzáadása - + Add fixed y-coordinate constraint Rögzített y-koordináta kényszerítés hozzáadása - - + + Add parallel constraint Párhuzamos kényszerítés hozzáadása - - - - - - - + + + + + + + Add perpendicular constraint Merőleges kényszerítés hozzáadása - + Add perpendicularity constraint Függőlegesség kényszerítés hozzáadása - + Swap coincident+tangency with ptp tangency Egybeeső érintő felcserélése ptp érintővel - + Swap PointOnObject+tangency with point to curve tangency Felcseréli a tárgyat+érintőpontot a görbe érintőpontjához ponttal - - - - - - - + + + + + + + Add tangent constraint Érintő kényszerítés hozzáadása - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Érintő pont kényszerítés hozzáadása - - - - + + + + Add radius constraint Sugár kényszerítés hozzáadása - - - - + + + + Add diameter constraint Átmérőhöz kényszerítés hozzáadása - - - - + + + + Add radiam constraint Sugár/átm-kényszer hozzáadása - - - - + + + + Add angle constraint Szöghöz kényszerítés hozzáadása - - + + Add equality constraint Egyenlőség kényszerítés hozzáadása - - - - - + + + + + Add symmetric constraint Szimmetrikus kényszerítés hozzáadása - + Add Snell's law constraint Fénytörés (Snellius-törvény) kényszerítés hozzáadása - + Toggle constraint to driving/reference Kényszerítés váltása megvezetés/hivatkozás közt - + Activate/Deactivate constraint Kényszerítés bekapcsolása/kikapcsolása @@ -2099,47 +2099,47 @@ invalid constraints, degenerated geometry, etc. Görbák összekapcsolása - + Cut in Sketcher - Cut in Sketcher + Kivágás a vázlatkészítőben - + Paste in Sketcher - Paste in Sketcher + Beillesztés a vázlatkészítőben - + Exposing Internal Geometry Belső geometria felfedése - + Create symmetric geometry Szimmetrikus geometria létrehozása - + Copy/clone/move geometry Geometria másolása/klónozása/áthelyezése - + Create copy of geometry Geometria másolatának létrehozása - + Delete all geometry Minden geometria törlése - + Delete All Constraints Töröl minden kényszert - + Remove Axes Alignment Tengelyek igazításának eltávolítása @@ -2157,8 +2157,8 @@ invalid constraints, degenerated geometry, etc. A kényszerítés virtuális helyének frissítése - + Add auto constraints Automatikus kényszerítés hozzáadása @@ -2173,22 +2173,22 @@ invalid constraints, degenerated geometry, etc. Vázlat kényszerítés átnevezése - + Drag Point Pont húzása - + Drag Curve Ív húzása - + Drag Constraint Kényszerítés húzása - + Modify sketch constraints Vázlat kényszerítés módosítása @@ -2225,7 +2225,12 @@ invalid constraints, degenerated geometry, etc. Scale geometries - Scale geometries + Geometriák méretezése + + + + Translate geometries + Translate geometries @@ -2331,16 +2336,16 @@ invalid constraints, degenerated geometry, etc. Csomó nem illeszthető be a B-görbe paramétertartományon kívülre. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget paraméter indexe a tartományon kívül @@ -2406,20 +2411,8 @@ invalid constraints, degenerated geometry, etc. Ne csatolja - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Rossz kijelölés @@ -2631,8 +2635,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Kettős kényszerítés @@ -2648,8 +2652,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! A kijelölt élnek már van blokk kényszerítése! @@ -2661,7 +2665,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Válasszon sarkokat a vázlatból. @@ -2686,29 +2690,29 @@ invalid constraints, degenerated geometry, etc. Egy blokk kényszerítést nem adhat hozzá, ha a vázlat megoldatlan vagy felesleges és ellentmondó kényszerítései vannak. - + Select one edge from the sketch. Válasszon egy élt a vázlaton. - + Select only edges from the sketch. Csak éleket válasszon a vázlaton. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + A B-görbe csak a pont-általi-érintőt támogatja. - + Number of selected objects is not 3 A kijelölt tárgyak száma nem 3 + - Error Hiba @@ -2723,171 +2727,170 @@ invalid constraints, degenerated geometry, etc. A kiválasztott elem(ek) nem fogadják el a függőleges illesztést! - + Endpoint to endpoint tangency was applied instead. Végpont-végpont érintőt alkalmazott helyette. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Válasszon két vagy több csúcsot a vázlatból az egybeeső kényszerítéshez, vagy legalább két kört, ellipszist, ívet vagy elliptikus ívet a koncentrikus kényszerhez. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Válasszon két csúcsot a vázlatból az egybeeső kényszerítéshez, vagy két kört, ellipszist, ívet vagy elliptikus ívet a koncentrikus kényszerhez. - + Select exactly one line or one point and one line or two points from the sketch. Válasszon ki pontosan egy sort vagy egy pontot és egy sort és két pontot a vázlatból. - + Cannot add a length constraint on an axis! Nem adható hozzá a hosszanti illesztés egy tengelyen! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Válasszon ki pontosan egy vonalat vagy egy pontot és egy vonalat vagy két pontot vagy két kört a vázlatból. - + This constraint does not make sense for non-linear curves. Ennek a kényszerítésnek nincs értelme a nem-lineáris görbéknél. - + Endpoint to edge tangency was applied instead. Ehelyett a végpont és az él érintője került alkalmazásra. - - - - - - + + + + + + Select the right things from the sketch. Válassza ki a megfelelő dolgokat a vázlatból. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Jelöljön ki egy olyan élt, amely nem B-görbe vastagságú. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + Egy vagy két pont-tárgyra vonatkozó kényszerítés(ek) törlésre került(ek), mivel a legutóbbi belsőleg alkalmazott kényszerítés is pont-tárgyra vonatkozik. - + Select either several points, or several conics for concentricity. Válasszon ki több pontot vagy több kúpot a koncentrikusság. - + Select either one point and several curves, or one curve and several points Válasszon ki egy pontot és több görbét, vagy egy görbét és több pontot - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Válasszon ki egy pontot és több görbét vagy egy görbét és több pontot a pontATárgyon, vagy több pontot a egybeesések, vagy több kúpot a kúpszelet esetén. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. A kijelölt pontok egyike sem volt korlátozva a megfelelő görbékre, mivel ugyanannak az elemnek a részei, valamint mindkettő külső geometria, vagy mert az éle nem megfelelő. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. A kijelölt pontok egyike sincs kényszerítve a vonatkozó görbékhez, mert azok részei ugyanannak az elemnek, vagy azért, mert mindkét külső geometria. - + Cannot add a length constraint on this selection! Nem adható hozzá a hosszanti illesztés ezen a kijelölésen! - - - - + + + + Select exactly one line or up to two points from the sketch. Válasszon ki pontosan egy vonalat, vagy legfeljebb két pontot a vázlatból. - + Cannot add a horizontal length constraint on an axis! Nem lehet hozzáadni egy vízszintes hosszanti illesztést egy tengelyen! - + Cannot add a fixed x-coordinate constraint on the origin point! Nem adható hozzá a rögzített x-koordináta illesztése a kezdő ponthoz! - - + + This constraint only makes sense on a line segment or a pair of points. Ez a kényszerítés csak egy vonalszakaszon vagy egy pont páron érvényesül. - + Cannot add a vertical length constraint on an axis! Nem adható hozzá a függőleges hosszanti illesztés egy tengelyen! - + Cannot add a fixed y-coordinate constraint on the origin point! Nem adható hozzá a rögzített y-koordináta illesztése a kezdő ponthoz! - + Select two or more lines from the sketch. Válasszon ki két vagy több vonalat a vázlatból. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Válasszon ki legalább két vonalat a vázlatból. - - Select a valid line. - Válasszon ki egy érvényes egyenest. - - - - + The selected edge is not a valid line. A kiválasztott él nem egy érvényes egyenes. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpont; két görbe és egy pont. - + Select some geometry from the sketch. perpendicular constraint Válasszon ki néhány geometriát a vázlatból. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nem lehet hozzáadni a függőlegesség illesztést a független ponton! - - + + One of the selected edges should be a line. Az egyik kijelölt élnek egy vonalnak kell lennie. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Végpont-végpont érintőt alkalmazott. Az egybeeső kényszerítést törölve lett. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Végponttól az élig érintőt alkalmaztak. A tárgy kényszerítés pontját törölték. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpont; két görbe és egy pont. - + Select some geometry from the sketch. tangent constraint Válasszon ki néhány geometriát a vázlatból. - - - + + + Cannot add a tangency constraint at an unconnected point! Nem lehet hozzáadni egy érintő illesztést a független ponton! - - + + Tangent constraint at B-spline knot is only supported with lines! A B-görbe csomó érintő kényszerítését csak vonalak támogatják! - + B-spline knot to endpoint tangency was applied instead. B-görbe csomó a végponthoz érintőt alkalmazott helyette. - - + + Wrong number of selected objects! Kijelölt objektumok téves mennyisége! - - + + With 3 objects, there must be 2 curves and 1 point. 3 tárggyal, két görbének és 1 pontnak kell lennie. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Válasszon egy vagy több ívet vagy kört a vázlatból. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Jelöljön ki egy vagy több B-görbe pólust, vagy egy vagy több ívet vagy kört a vázlatból, de nem keverve. - - - + + + Constraint only applies to arcs or circles. Kényszerítés csak az ívekre és körökre vonatkozik. - - + + Select one or two lines from the sketch. Or select two edges and a point. Válasszon egy vagy két vonalat a vázlatból. Vagy válasszon ki két élet és egy pontot. @@ -3010,88 +3013,88 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Egy szög kényszerítést nem lehet beállítani két párhuzamos vonalra. - + Cannot add an angle constraint on an axis! Nem lehet hozzáadni egy szög illesztést egy tengelyhez! - + Select two edges from the sketch. Két él kiválasztása a vázlaton. - + Select two or more compatible edges. Válasszon ki két vagy több kompatibilis élt. - + Sketch axes cannot be used in equality constraints. Vázlat tengelyek nem használhatók egyenlőségi kényszerítésekhez. - + Equality for B-spline edge currently unsupported. Egyenlőség B-görbe élével jelenleg nem támogatott. - - - + + + Select two or more edges of similar type. Jelöljön ki két vagy több hasonló típusú élt. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Válasszon ki két pontot és egy szimmetria vonalat, két pontot és egy szimmetria pontot vagy egy vonalat és egy szimmetria pontot a vázlatból. - - + + Cannot add a symmetry constraint between a line and its end points. Nem lehet hozzáadni a szimmetria kényszerítést a vonalhoz és annak végpontjaihoz. - - + + Cannot add a symmetry constraint between a line and its end points! Nem lehet hozzáadni a szimmetria illesztést a vonalhoz és annak végpontjaihoz! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Jelöljön ki két vonalvégpontot sugarakként, és egy szegélyt jelölő élt. Az első kijelölt pont megfelel az n1 indexnek, a második az n2-nek, és a méretadat állítja be az n2/n1 arányt. - + Selected objects are not just geometry from one sketch. A kijelölt tárgyak nem csak egy vázlat geometriái. - + Cannot create constraint with external geometry only. Kényszerítést nem lehet szimplán külső geometriával létrehozni. - + Incompatible geometry is selected. Inkompatibilis geometriát jelölt ki. + - - - - + + + Select constraints from the sketch. Válasszon kényszerítéseket a vázlatból. @@ -3113,9 +3116,9 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Határozza meg a B-görbe fokot 1 és %1 között: - + CAD Kernel Error CAD rendszermag hiba @@ -3191,69 +3194,69 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Válasszon ki két végpontot vagy egy átfedő pontot. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Válasszon ki elemeket egy egyedülálló vázlatból. - + No constraint selected Nincs kényszerítés kiválasztva - + At least one constraint must be selected Legalább egy kényszerítést ki kell kiválasztani - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. A szimmetrikus építési legalább két geometriai elemet igényel, az utoljára kiválasztott geometriai elem lesz a referencia a szimmetria építéséhez. - + The last element must be a point or a line serving as reference for the symmetry construction. Az utolsó elemnek egy pontnak vagy egy vonalnak kell lennie, ami szimmetria építésére szolgáló hivatkozás szolgálja. - - + + A copy requires at least one selected non-external geometric element Egy másolás legalább egy nem-külső geometriai elem kiválasztást igényel - + Delete All Geometry Töröl minden geometriát - + Are you really sure you want to delete all geometry and constraints? Tényleg biztos benne, hogy törölni szeretné az összes geometriát és kényszerítést? - + Delete All Constraints Töröl minden kényszert - + Are you really sure you want to delete all the constraints? Biztos benne, hogy törli az összes kényszerítést? - + Removal of axes alignment requires at least one selected non-external geometric element A tengelyek igazításának eltávolításához legalább egy kiválasztott nem külső geometriai elemre van szükség @@ -3332,7 +3335,12 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Scale parameters - Scale parameters + Méretezési paraméterek + + + + Translate parameters + Translate parameters @@ -3644,12 +3652,12 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Hossz: - + Refractive index ratio Refraktív index arány - + Ratio n2/n1: Arány n2/n1: @@ -4063,13 +4071,13 @@ tükröződik a másolatokon SketcherGui::SketcherRegularPolygonDialog - Create array - Tömb létrehozása + Create regular polygon + Szabályos sokszög létrehozása - Number of Sides: - Oldalak száma: + Number of sides: + Number of sides: @@ -4088,7 +4096,7 @@ tükröződik a másolatokon Task panel widgets - Task panel widgets + Feladatpanel modulok @@ -4172,7 +4180,7 @@ A hatályba lépéshez újra be kell lépnie a szerkesztési módba. Dimension constraint - Dimension constraint + Méretezés kényszerítés @@ -4181,11 +4189,11 @@ A hatályba lépéshez újra be kell lépnie a szerkesztési módba. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Válassza ki az eszköztár méretezési kényszerítés típusát: +'Egyetlen eszköz': Egyetlen eszköz az összes méretezési kényszerítéshez: Távolság, X/Y távolság, szög, sugár.(Többi a legördülőben) +'Különálló eszközök': Különálló eszközök minden egyes méretezési kényszerítéshez. +'Mindkettő': Mind a 'Méret' eszköz, mind a különálló eszközök elérhetőek lesznek. +Ez a beállítás csak az eszköztárra vonatkozik. A kiválasztástól függetlenül mindig minden eszköz elérhető a menüben és a parancsikonokon keresztül. @@ -4193,10 +4201,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + A méretezés eszköz használata során kiválaszthatja, hogyan kezelje a köröket és az íveket: +'Automata': Az eszköz az ívekre a sugarat, a körökre pedig az átmérőt alkalmazza. +'Átmérő': Az eszköz az ívekre és a körökre is az átmérőt alkalmazza. +'Sugár': Az eszköz az ívekre és a körökre is sugarat alkalmaz. @@ -4206,7 +4214,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + Megjelenítési paraméterek: @@ -5073,112 +5081,112 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. SketcherGui::ViewProviderSketch - + Edit sketch Vázlat szerkesztése - + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? - + Invalid sketch Érvénytelen vázlat - + Do you want to open the sketch validation tool? Szeretné megnyitni a vázlat érvényesítés eszközt? - + The sketch is invalid and cannot be edited. A vázlat érvénytelen, és nem szerkeszthető. - + Please remove the following constraint: Kérjük, távolítsa el az alábbi ilesztést: - + Please remove at least one of the following constraints: Kérjük, távolítsa el, legalább az egyiket a következő kényszerítésekből: - + Please remove the following redundant constraint: Kérjük, távolítsa el a következő felesleges kényszerítést: - + Please remove the following redundant constraints: Kérjük, távolítsa el a következő felesleges kényszerítéseket: - + The following constraint is partially redundant: A következő kényszerítés részben felesleges: - + The following constraints are partially redundant: A következő kényszerítések részben feleslegesek: - + Please remove the following malformed constraint: Távolítsa el a következő hibás kényszerítést: - + Please remove the following malformed constraints: Távolítsa el a következő hibás kényszerítéseket: - + Empty sketch Üres vázlat - + Over-constrained: Eltúlzott kényszertés: - + Malformed constraints: Hibásan formázott kényszerítés: - + Redundant constraints: Felesleges kényszerítések: - + Partially redundant: Részben felesleges: - + Solver failed to converge A megoldó nem tudott hasonlítani - + Under constrained: Kényszerítés alatt: - + %n DoF(s) %n szabadságfok(ok) @@ -5186,7 +5194,7 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. - + Fully constrained Teljesen kényszertett @@ -5257,8 +5265,8 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Létrehoz egy geometria klónt az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -5266,17 +5274,17 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_CompCopy - + Clone Klónozás - + Copy Másolás - + Move Mozgat @@ -5284,8 +5292,8 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Rögzíteni egy kör vagy egy ív átmérőjét @@ -5293,8 +5301,8 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Sugár/Átmérő illesztése körre vagy ívre @@ -5302,8 +5310,8 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Sugár illesztése körre vagy ívre @@ -5311,8 +5319,8 @@ Ez a vázlat geometriáinak és kényszerítéseinek elemzésével történik. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Egyszerű geometria másolatot hoz létre, az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -5597,8 +5605,8 @@ Jelölje ki azt a módszert, amely a vázlatot a kijelölt tárgyakhoz csatolja. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mozgatja a geometriát az utolsó kiválasztott pont, mint referencia pont, figyelembevételével @@ -5923,7 +5931,7 @@ Az Eigen Sparse QR algoritmus ritka mátrixokra van optimalizálva; általában ViewProviderSketch - + and %1 more és további %1 @@ -6153,64 +6161,65 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Hiba - + Failed to delete all geometry Nem sikerült törölni az összes geometriát - + Failed to delete all constraints Nem sikerült törölni az összes kényszerítést - - + + Invalid selection Érvénytelen kijelölés - + Selection has no valid geometries. A kiválasztás nem rendelkezik érvényes geometriákkal. - + Selection has no valid geometries. BSplines, Points are not supported yet. A kiválasztás nem rendelkezik érvényes geometriákkal. A B-görbek, pontok még nem támogatottak. @@ -6220,18 +6229,18 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám.A korlátozás érvénytelen indexinformációval rendelkezik, és rosszul formázott. - - - - - - - + + + + + + + Invalid Constraint Érvénytelen kényszerítés @@ -6271,8 +6280,8 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám.B-görbe pólus létrehozás hiba - + Error creating B-spline Hiba a B-görbe létrehozásakor @@ -6328,16 +6337,17 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám.Sikertelen a vonal hozzáadása - - - - - - - - + + + + + + + + + Tool execution aborted Az eszköz végrehajtása megszakadt @@ -6372,9 +6382,9 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám.Sikertelen az él vágása + - Value Error Értékhiba @@ -6426,7 +6436,12 @@ A rácsháló távolsága megváltozik, ha kisebb lesz, mint ez a pixelszám. Failed to scale - Failed to scale + Nem sikerült méretezni + + + + Failed to translate + Failed to translate @@ -6627,12 +6642,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá CmdSketcherConstrainRadius - + Constrain radius Sugár illesztés - + Fix the radius of a circle or an arc Sugár illesztése körre vagy ívre @@ -6749,12 +6764,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá CmdSketcherOffset - + Offset geometry Eltolási geometria - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Kijelölt geometriák eltolása. Pozitív eltolási hossz esetén az eltolás kifelé, negatív hossz esetén befelé történik. @@ -6774,7 +6789,7 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + Ez a vonatkoztatási kényszerítéseket (pl. távolság) érinti.Ha aktiválja a Klónozás lehetőséget, az eszköz lemásolja a vonatkoztatási adatokat.Ellenkező esetben megpróbálja azokat egyenlőségekkel helyettesíteni. @@ -6887,12 +6902,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá CmdSketcherConstrainCoincidentUnified - + Constrain coincident Egymásra llesztés - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Egybevágó kényszerítés létrehozása pontok között, vagy egy pont rögzítése egy élen, vagy koncentrikus kényszerítés létrehozása körök, ívek és ellipszisek között @@ -6900,12 +6915,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá CmdSketcherRotate - + Polar transform Sarok átalakítás - + Rotate selected geometries, making n copies, enable creation of circular patterns. A kiválasztott geometriák elforgatása, n másolat készítése, lehetővé teszi a kör alakú minták létrehozását. @@ -7014,12 +7029,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Line pattern of normal edges. - Line pattern of normal edges. + Aktuális élek vonalmintája. Width of normal edges. - Width of normal edges. + Aktuális élek szélessége. @@ -7039,12 +7054,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Line pattern of construction edges. - Line pattern of construction edges. + Az építési élek vonal mintázata. Width of construction edges. - Width of construction edges. + Az építési élek szélessége. @@ -7064,12 +7079,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + Belső igazított élek vonalmintája. Width of internal aligned edges. - Width of internal aligned edges. + Belső igazított élek szélessége. @@ -7084,12 +7099,12 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Line pattern of external edges. - Line pattern of external edges. + Külső élek vonalmintája. Width of external edges. - Width of external edges. + Külső élek szélessége. @@ -7187,7 +7202,7 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Másolatok (+'U'/-'J') @@ -7195,7 +7210,7 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Oldalak (+'U'/-'J') @@ -7203,7 +7218,7 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Keep original geometries (U) - Keep original geometries (U) + Eredeti geometriák megtartása (U) @@ -7211,64 +7226,106 @@ Az üres helyre való bal egérgombbal kattintással érvényesítheti az aktuá Constrain - Constrain + Kényszerít Constrain tools. - Constrain tools. + Kényszerítés eszközei. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + M&ásolás a vázlatkészítőben - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Kijelölt geometriák és kényszerítések másolása a vágólapra CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + K&ivágás a vázlatkészítőben - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Kijelölt geometriák és kényszerítések kivágása a vágólapra CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + B&eillesztés a vázlatkészítőben - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Kijelölt geometriák és kényszerítések beillesztése a vágólapra CmdSketcherScale - + Scale transform - Scale transform + Méretarány átalakítása - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Kijelölt geometriák méretezése. A középpont kiválasztása után vagy megadhatja a méretezési tényezőt, vagy kiválaszthat két referenciapontot, majd a méretezési tényezőt = hossz(p2-középpont) / hossz(p1-középpont). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Kényszerítések klónozása + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts index beb44ff081..6dfaff5c48 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Constrain arc or circle - + Constrain an arc or a circle Constrain an arc or a circle - + Constrain radius Kendalikan radius - + Constrain diameter Constrain diameter - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -390,12 +390,12 @@ CmdSketcherConstrainAngle - + Constrain angle Kendalikan sudut - + Fix the angle of a line or the angle between two lines Perbaiki sudut garis atau sudut antara dua garis @@ -416,12 +416,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Kendala bertepatan - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -429,12 +429,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Constrain diameter - + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -442,12 +442,12 @@ CmdSketcherConstrainDistance - + Constrain distance Kendalikan jarak - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -455,12 +455,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Perbaiki jarak horizontal antara dua titik atau garis ujung @@ -468,12 +468,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Perbaiki jarak vertikal antara dua titik atau garis ujung @@ -481,12 +481,12 @@ CmdSketcherConstrainEqual - + Constrain equal Kendalikan sama - + Create an equality constraint between two lines or between circles and arcs Buat batasan kesetaraan antara dua garis atau antara lingkaran dan busur @@ -522,12 +522,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Kendalikan sejajar - + Create a parallel constraint between two lines Buat batasan paralel antara dua baris @@ -535,12 +535,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Kendalikan tegak lurus - + Create a perpendicular constraint between two lines Buat kendala tegak lurus antara dua garis @@ -548,12 +548,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Konstruksikan titik ke objek - + Fix a point onto an object Perbaiki sebuah titik pada sebuah objek @@ -561,12 +561,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -574,12 +574,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -589,12 +589,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Konstruksikan simetris - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points @@ -604,12 +604,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Kendalikan singgung - + Create a tangent constraint between two entities Buat kendala singgung antara dua entitas @@ -643,12 +643,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Salinan - + Creates a simple copy of the geometry taking as reference the last selected point Membuat salinan geometri sederhana sebagai referensi titik terakhir yang dipilih @@ -1033,12 +1033,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Delete all constraints - + Delete all constraints in the sketch Delete all constraints in the sketch @@ -1046,12 +1046,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1235,12 +1235,12 @@ as mirroring reference. CmdSketcherMove - + Move Pindah - + Moves the geometry taking as reference the last selected point Moves the geometry taking as reference the last selected point @@ -1261,12 +1261,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1274,12 +1274,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1302,12 +1302,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Tampilkan / sembunyikan geometri internal - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1315,8 +1315,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Select conflicting constraints @@ -1324,12 +1324,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1337,12 +1337,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1350,12 +1350,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1363,12 +1363,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Select horizontal axis - + Select the local horizontal axis of the sketch Select the local horizontal axis of the sketch @@ -1376,8 +1376,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1385,12 +1385,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Select the local origin point of the sketch @@ -1398,8 +1398,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Select partially redundant constraints @@ -1407,8 +1407,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Select redundant constraints @@ -1416,12 +1416,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Select vertical axis - + Select the local vertical axis of the sketch Select the local vertical axis of the sketch @@ -1468,12 +1468,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Simetri - + Creates symmetric geometry with respect to the last selected line or point Membuat geometri simetris berkenaan dengan garis atau titik yang terakhir dipilih @@ -1481,12 +1481,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Activates or deactivates the selected constraints @@ -1507,12 +1507,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1601,54 +1601,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1657,8 +1657,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Add length constraint @@ -1780,159 +1780,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Add perpendicular constraint - + Add perpendicularity constraint Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2103,47 +2103,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Copy/clone/move geometry - + Create copy of geometry Create copy of geometry - + Delete all geometry Delete all geometry - + Delete All Constraints Delete All Constraints - + Remove Axes Alignment Remove Axes Alignment @@ -2161,8 +2161,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2177,22 +2177,22 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag Constraint Drag Constraint - + Modify sketch constraints Modify sketch constraints @@ -2231,6 +2231,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2335,16 +2340,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2410,20 +2415,8 @@ invalid constraints, degenerated geometry, etc. Jangan pasang - - - - - - - - - - - - @@ -2434,133 +2427,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Pilihan salah @@ -2635,8 +2639,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Kendala ganda @@ -2652,8 +2656,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! @@ -2665,7 +2669,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Pilih simpul dari para sketsa . @@ -2690,29 +2694,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Kesalahan @@ -2727,75 +2731,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Pilih tepat satu baris atau satu titik dan satu garis atau dua poin dari para sketsa . - + Cannot add a length constraint on an axis! Tidak dapat menambahkan batasan panjang pada sumbu! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Pilih hal yang benar dari yang sketsa . - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2805,93 +2809,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Tak satu pun dari titik-titik yang dipilih dibatasi ke masing-masing kurva, entah karena mereka adalah bagian dari elemen yang sama, atau karena keduanya adalah geometri eksternal . - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Pilih tepat satu baris atau sampai dengan dua poin dari para sketsa . - + Cannot add a horizontal length constraint on an axis! Tidak dapat menambahkan batasan panjang horizontal pada sumbu! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Tidak dapat menambahkan batasan panjang vertikal pada sumbu! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. Pilih dua atau lebih baris dari para sketsa . - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Pilih setidaknya dua baris dari para sketsa . - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2899,35 +2902,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. perpendicular constraint Pilih beberapa geometri dari para sketsa . - - + + Cannot add a perpendicularity constraint at an unconnected point! Tidak dapat menambahkan batasan tegak lurus pada titik yang tidak terhubung ! - - + + One of the selected edges should be a line. Salah satu tepi yang dipilih harus berupa garis . - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ada beberapa cara kendala ini bisa diterapkan. Kombinasi yang diterima: dua kurva; titik akhir dan kurva; dua titik akhir; dua tikungan dan satu titik . - + Select some geometry from the sketch. tangent constraint Pilih beberapa geometri dari para sketsa . - - - + + + Cannot add a tangency constraint at an unconnected point! Tidak dapat menambahkan kendala singgung pada titik yang tidak terhubung ! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Salah jumlah objek terpilih ! - - + + With 3 objects, there must be 2 curves and 1 point. Dengan 3 objek, harus ada 2 kurva dan 1 titik . - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Pilih satu atau lebih busur atau lingkaran dari para sketsa . - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. Kendala hanya berlaku untuk busur atau lingkaran. - - + + Select one or two lines from the sketch. Or select two edges and a point. Pilih satu atau dua baris dari para sketsa . Atau pilih dua sisi dan satu titik . @@ -3010,88 +3013,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kendala sudut tidak dapat diatur untuk dua garis sejajar. - + Cannot add an angle constraint on an axis! Tidak dapat menambahkan batasan sudut pada sumbu! - + Select two edges from the sketch. Pilih dua sisi dari satu sketsa . - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Kesetaraan untuk tepi B-spline saat ini tidak didukung. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Pilih dua poin dan simetri garis , dua poin dan simetri titik atau garis dan simetri titik dari yang sketsa . - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Tidak dapat menambahkan batasan simetri antara garis dan titik akhirnya! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Objek yang dipilih bukan hanya geometri dari satu sketsa . - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3113,9 +3116,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Kernel CAD Error @@ -3191,69 +3194,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Pilih elemen dari satu sketsa . - + No constraint selected Tidak ada batasan yang dipilih - + At least one constraint must be selected Setidaknya satu kendala harus dipilih - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Konstruksi simetris membutuhkan setidaknya dua elemen geometris, elemen geometris terakhir menjadi referensi untuk konstruksi simetri . - + The last element must be a point or a line serving as reference for the symmetry construction. Unsur terakhir harus menjadi titik atau garis yang berfungsi sebagai acuan untuk konstruksi simetri . - - + + A copy requires at least one selected non-external geometric element Salinan memerlukan setidaknya satu elemen geometrik non-eksternal yang dipilih - + Delete All Geometry Menghapus semua geometri - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Delete All Constraints - + Are you really sure you want to delete all the constraints? Are you really sure you want to delete all the constraints? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3334,6 +3337,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - + Refractive index ratio Rasio indeks bias - + Ratio n2/n1: Rasio n2 / n1: @@ -4065,13 +4073,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Buat array + Create regular polygon + Buat poligon biasa - Number of Sides: - Number of Sides: + Number of sides: + Number of sides: @@ -5073,119 +5081,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sketsa tidak valid - + Do you want to open the sketch validation tool? Apakah Anda ingin membuka alat validasi sketsa ? - + The sketch is invalid and cannot be edited. sketsa tidak valid dan tidak dapat diedit. - + Please remove the following constraint: Harap hapus batasan berikut : - + Please remove at least one of the following constraints: Harap hapus setidaknya satu dari batasan berikut: - + Please remove the following redundant constraint: Harap hapus batasan berlebihan berikut ini : - + Please remove the following redundant constraints: Harap hapus batasan berlebihan berikut ini : - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Sketsa kosong - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) - + Fully constrained Fully constrained @@ -5256,8 +5264,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Menciptakan tiruan dari geometri mengambil sebagai referensi titik dipilih terakhir @@ -5265,17 +5273,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Klon - + Copy Salinan - + Move Pindah @@ -5283,8 +5291,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fix the diameter of a circle or an arc @@ -5292,8 +5300,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5301,8 +5309,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Perbaiki jari-jari lingkaran atau busur @@ -5310,8 +5318,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Membuat salinan geometri sederhana sebagai referensi titik terakhir yang dipilih @@ -5597,8 +5605,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Moves the geometry taking as reference the last selected point @@ -5922,7 +5930,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6152,64 +6160,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Kesalahan - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Pilihan tidak valid - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6219,18 +6228,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6270,8 +6279,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6327,16 +6336,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6371,9 +6381,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6427,6 +6437,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6626,12 +6641,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Kendalikan radius - + Fix the radius of a circle or an arc Perbaiki jari-jari lingkaran atau busur @@ -6748,12 +6763,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6886,12 +6901,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Kendala bertepatan - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6899,12 +6914,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7221,12 +7236,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7234,12 +7249,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7247,12 +7262,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7260,14 +7275,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 86e617452b..eb82f5a130 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clone della geometria prendendo come riferimento l'ultimo punto selezionato @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Vincola l'arco o il cerchio - + Constrain an arc or a circle Vincola l'arco o il cerchio - + Constrain radius Raggio - + Constrain diameter Vincola il diametro - + Constrain auto radius/diameter Vincola raggio/diametro automatico @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clone della geometria prendendo come riferimento l'ultimo punto selezionato @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Angolo - + Fix the angle of a line or the angle between two lines Fissa l'angolo di una linea o l'angolo tra due linee @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Coincidenza - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Crea un vincolo coincidente tra i punti, o un vincolo concentrico tra cerchi, archi ed ellissi @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Vincola il diametro - + Fix the diameter of a circle or an arc Vincola il diametro di un cerchio o di un arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Distanza - + Fix a length of a line or the distance between a line and a vertex or between two circles Fissare una lunghezza di una linea o la distanza tra una linea e un vertice o tra due cerchi @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Distanza orizzontale - + Fix the horizontal distance between two points or line ends Fissa la distanza orizzontale tra due punti o estremi di una linea @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Distanza verticale - + Fix the vertical distance between two points or line ends Fissa la distanza verticale tra due punti o estremi di una linea @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Uguale - + Create an equality constraint between two lines or between circles and arcs Crea un vincolo di uguaglianza tra due linee o tra cerchi e archi @@ -520,12 +520,12 @@ sul vertice selezionato CmdSketcherConstrainParallel - + Constrain parallel Parallelo - + Create a parallel constraint between two lines Crea un vincolo di parallelismo tra due linee @@ -533,12 +533,12 @@ sul vertice selezionato CmdSketcherConstrainPerpendicular - + Constrain perpendicular Perpendicolare - + Create a perpendicular constraint between two lines Crea un vincolo di perpendicolarità tra due linee @@ -546,12 +546,12 @@ sul vertice selezionato CmdSketcherConstrainPointOnObject - + Constrain point onto object Punto su oggetto - + Fix a point onto an object Fissa un punto su un oggetto @@ -559,12 +559,12 @@ sul vertice selezionato CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Vincola raggio/diametro automatico - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fissare il diametro se si sceglie un cerchio, o il raggio se si sceglie un arco/spline @@ -572,12 +572,12 @@ sul vertice selezionato CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Vincolo di rifrazione (legge di Snell) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Crea un vincolo di rifrazione (legge di Snell) tra due punti finali di raggi e con un bordo come interfaccia. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Simmetria - + Create a symmetry constraint between two points with respect to a line or a third point Crea un vincolo di simmetria tra due punti @@ -601,12 +601,12 @@ rispetto a una linea o a un terzo punto CmdSketcherConstrainTangent - + Constrain tangent Tangente - + Create a tangent constraint between two entities Crea un vincolo di tangenza tra due entità @@ -640,12 +640,12 @@ rispetto a una linea o a un terzo punto CmdSketcherCopy - + Copy Copia - + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia semplice della geometria prendendo come riferimento l'ultimo punto selezionato @@ -1030,12 +1030,12 @@ rispetto a una linea o a un terzo punto CmdSketcherDeleteAllConstraints - + Delete all constraints Elimina tutti i vincoli - + Delete all constraints in the sketch Elimina tutti i vincoli dello schizzo @@ -1043,12 +1043,12 @@ rispetto a una linea o a un terzo punto CmdSketcherDeleteAllGeometry - + Delete all geometry Elimina tutte le geometrie - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Elimina tutte le geometrie e i vincoli nello schizzo attuale, ad eccezione della geometria esterna @@ -1232,12 +1232,12 @@ come riferimento speculare. CmdSketcherMove - + Move Sposta - + Moves the geometry taking as reference the last selected point Sposta la geometria prendendo come riferimento l'ultimo punto selezionato @@ -1258,12 +1258,12 @@ come riferimento speculare. CmdSketcherRectangularArray - + Rectangular array Serie rettangolare - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Crea una serie rettangolare della geometria usando come riferimento l'ultimo punto selezionato @@ -1271,12 +1271,12 @@ come riferimento speculare. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Rimuovi allineamento assi - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica i vincoli per rimuovere l'allineamento degli assi cercando di preservare la relazione di vincolo della selezione @@ -1299,12 +1299,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostra/Nascondi la geometria interna - + Show all internal geometry or hide unused internal geometry Mostra tutte le geometrie interne o nasconde le geometrie interne inutilizzate @@ -1312,8 +1312,8 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Seleziona i vincoli in conflitto @@ -1321,12 +1321,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectConstraints - + Select associated constraints Seleziona i vincoli associati - + Select the constraints associated with the selected geometrical elements Seleziona i vincoli associati agli elementi geometrici selezionati @@ -1334,12 +1334,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Seleziona la geometria associata - + Select the geometrical elements associated with the selected constraints Seleziona gli elementi geometrici associati ai vincoli selezionati @@ -1347,12 +1347,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Seleziona i gradi di libertà senza vincoli - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Seleziona gli elementi geometrici dove il risolutore rileva ancora gradi di libertà non vincolati. @@ -1360,12 +1360,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Seleziona l'asse orizzontale - + Select the local horizontal axis of the sketch Seleziona l'asse orizzontale locale dello schizzo @@ -1373,8 +1373,8 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Seleziona vincoli malformati @@ -1382,12 +1382,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectOrigin - + Select origin Seleziona l'origine - + Select the local origin point of the sketch Seleziona il punto di origine locale dello schizzo @@ -1395,8 +1395,8 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Seleziona vincoli parzialmente ridondanti @@ -1404,8 +1404,8 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Seleziona i vincoli sovrabbondanti @@ -1413,12 +1413,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSelectVerticalAxis - + Select vertical axis Seleziona asse verticale - + Select the local vertical axis of the sketch Seleziona l'asse verticale locale dello schizzo @@ -1465,12 +1465,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherSymmetry - + Symmetry Simmetria - + Creates symmetric geometry with respect to the last selected line or point Crea una geometria simmetrica rispetto all'ultima linea o punto selezionato @@ -1478,12 +1478,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Attiva/disattiva vincolo - + Activates or deactivates the selected constraints Attiva o disattiva i vincoli selezionati @@ -1504,12 +1504,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Attiva/disattiva vincolo di guida/riferimento - + Set the toolbar, or the selected constraints, into driving or reference mode Imposta la barra degli strumenti, o i vincoli selezionati, @@ -1598,54 +1598,54 @@ vincoli non validi, geometria degenerata, ecc. Aggiungi vincolo fisso - + Add 'Block' constraint Aggiungi vincolo di blocco - + Add block constraint Aggiungi vincolo di blocco - - + + Add coincident constraint Vincola la coincidenza - - + + Add distance from horizontal axis constraint Vincola la distanza dall'asse orizzontale - - + + Add distance from vertical axis constraint Vincola la distanza dall'asse verticale - - + + Add point to point distance constraint Vincola la distanza tra i punti - - + + Add point to line Distance constraint Vincola la Distanza da punto a linea - - + + Add circle to circle distance constraint Aggiungi il vincolo di distanza da cerchio a cerchio - + Add circle to line distance constraint Aggiungi il vincolo di distanza dal cerchio alla linea @@ -1654,8 +1654,8 @@ vincoli non validi, geometria degenerata, ecc. - - + + Add length constraint Vincola lunghezza @@ -1777,159 +1777,159 @@ vincoli non validi, geometria degenerata, ecc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Vincola il punto all'oggetto - - + + Add point to point horizontal distance constraint Vincola la distanza orizzontale tra i punti - + Add fixed x-coordinate constraint Vincola la coordinata X - - + + Add point to point vertical distance constraint Vincola la distanza verticale tra i punti - + Add fixed y-coordinate constraint Vincola la coordinata Y - - + + Add parallel constraint Vincola parallelismo - - - - - - - + + + + + + + Add perpendicular constraint Vincola perpendicolare - + Add perpendicularity constraint Aggiungi vincolo di perpendicolarità - + Swap coincident+tangency with ptp tangency Scambia coincidenza+tangenza con tangenza ptp - + Swap PointOnObject+tangency with point to curve tangency Scambiare PointOnObject+tangenza con il punto a tangenza curva - - - - - - - + + + + + + + Add tangent constraint Vincola la tangenza - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Aggiungi punto di vincolo tangente - - - - + + + + Add radius constraint Vincola il raggio - - - - + + + + Add diameter constraint Vincola il diametro - - - - + + + + Add radiam constraint Vincolare il raggio - - - - + + + + Add angle constraint Vincola l'angolo - - + + Add equality constraint Vincola uguaglianza - - - - - + + + + + Add symmetric constraint Vincola simmetria - + Add Snell's law constraint Aggiungi vincolo di legge di Snell's - + Toggle constraint to driving/reference Commuta il vincolo guida/riferimento - + Activate/Deactivate constraint Attiva/disattiva vincolo @@ -2100,47 +2100,47 @@ vincoli non validi, geometria degenerata, ecc. Unisci le curve - + Cut in Sketcher - Cut in Sketcher + Taglia nello Sketcher - + Paste in Sketcher - Paste in Sketcher + Incolla nello Sketcher - + Exposing Internal Geometry Esposizione Geometria Interna - + Create symmetric geometry Crea geometria simmetrica - + Copy/clone/move geometry Copia/clona/muovi geometria - + Create copy of geometry Crea copia della geometria - + Delete all geometry Elimina tutte le geometrie - + Delete All Constraints Elimina tutti i vincoli - + Remove Axes Alignment Rimuovi Allineamento Assi @@ -2158,8 +2158,8 @@ vincoli non validi, geometria degenerata, ecc. Aggiorna lo spazio virtuale del vincolo - + Add auto constraints Aggiungi vincoli automatici @@ -2174,22 +2174,22 @@ vincoli non validi, geometria degenerata, ecc. Rinomina il vincolo dello schizzo - + Drag Point Trascina Punto - + Drag Curve Trascina Curva - + Drag Constraint Trascina Vincolo - + Modify sketch constraints Modifica i vincoli dello schizzo @@ -2226,7 +2226,12 @@ vincoli non validi, geometria degenerata, ecc. Scale geometries - Scale geometries + Scalatura geometrie + + + + Translate geometries + Translate geometries @@ -2332,16 +2337,16 @@ vincoli non validi, geometria degenerata, ecc. Il nodo non può essere inserito al di fuori dell'intervallo di parametri B-Spline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2407,20 +2412,8 @@ vincoli non validi, geometria degenerata, ecc. Non allegare - - - - - - - - - - - - @@ -2431,133 +2424,144 @@ vincoli non validi, geometria degenerata, ecc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selezione errata @@ -2632,8 +2636,8 @@ vincoli non validi, geometria degenerata, ecc. - - + + Double constraint Doppio vincolo @@ -2649,8 +2653,8 @@ vincoli non validi, geometria degenerata, ecc. - - + + The selected edge already has a Block constraint! Il bordo selezionato ha già un vincolo di fissaggio! @@ -2662,7 +2666,7 @@ vincoli non validi, geometria degenerata, ecc. - + Select vertices from the sketch. Selezionare i vertici nello schizzo. @@ -2687,29 +2691,29 @@ vincoli non validi, geometria degenerata, ecc. Un vincolo di blocco non può essere aggiunto se lo schizzo è irrisolto o ci sono vincoli ridondanti e conflittuali. - + Select one edge from the sketch. Seleziona un bordo dello schizzo. - + Select only edges from the sketch. Selezionare solo i bordi dallo schizzo. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + Solo tangente sul punto è supportato con una B-spline. - + Number of selected objects is not 3 Il numero di oggetti selezionati non è 3 + - Error Errore @@ -2724,75 +2728,75 @@ vincoli non validi, geometria degenerata, ecc. Gli elementi selezionati non possono accettare un vincolo orizzontale o verticale! - + Endpoint to endpoint tangency was applied instead. È stata invece applicata la tangenza punto finale su punto finale. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleziona due o più vertici dallo schizzo per un vincolo coincidente, o due o più cerchi, ellissi, archi o archi di ellisse per un vincolo concentrico. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Seleziona due vertici dallo schizzo per un vincolo coincidente, o due cerchi, ellissi, archi o archi di ellisse per un vincolo concentrico. - + Select exactly one line or one point and one line or two points from the sketch. Selezionare una linea o un punto più una linea, oppure due punti dello schizzo. - + Cannot add a length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza su un asse! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Selezionare esattamente una linea o un punto e una linea o due punti o due cerchi dallo schizzo. - + This constraint does not make sense for non-linear curves. Questo vincolo non ha senso per le curve non lineari. - + Endpoint to edge tangency was applied instead. È stata applicata invece la tangenza segmento sul punto finale. - - - - - - + + + + + + Select the right things from the sketch. Selezionare le cose giuste dallo schizzo. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Selezionare un bordo che non è un peso B-spline. @@ -2802,93 +2806,92 @@ vincoli non validi, geometria degenerata, ecc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Nessuno dei punti selezionati è stato vincolato alle rispettive curve, perché sono parti dello stesso elemento, perché entrambi sono geometria esterna, o perché il bordo non è ammissibile. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nessuno dei punti selezionati è stato vincolato sulla rispettiva curva, perchè essi sono parti dello stesso elemento, o perchè sono entrambi una geometria esterna. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Selezionare solo una linea oppure al massimo due punti dello schizzo. - + Cannot add a horizontal length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza orizzontale su un asse! - + Cannot add a fixed x-coordinate constraint on the origin point! Non è possibile aggiungere un vincolo di coordinata x nel punto di origine! - - + + This constraint only makes sense on a line segment or a pair of points. Questo vincolo ha senso solo su un segmento di linea o su una coppia di punti. - + Cannot add a vertical length constraint on an axis! Non è possibile aggiungere un vincolo di lunghezza verticale su un asse! - + Cannot add a fixed y-coordinate constraint on the origin point! Non è possibile aggiungere un vincolo di coordinata y nel punto di origine! - + Select two or more lines from the sketch. Selezionare due o più linee dello schizzo. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Selezionare almeno due linee dello schizzo. - - Select a valid line. - Selezionare una linea valida. - - - - + The selected edge is not a valid line. Il bordo selezionato non è una linea valida. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2898,35 +2901,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. - + Select some geometry from the sketch. perpendicular constraint Selezionare alcune geometrie dello schizzo. - - + + Cannot add a perpendicularity constraint at an unconnected point! Non è possibile aggiungere un vincolo di perpendicolarità in un punto non connesso! - - + + One of the selected edges should be a line. Uno degli spigoli selezionati deve essere una linea. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. È stato applicato il vincolo tangenza punto finale su punto finale. È stato eliminato il vincolo coincidente. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. È stato applicato il vincolo tangenza segmento su punto finale. È stato eliminato il vincolo punto su oggetto. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2936,67 +2939,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. - + Select some geometry from the sketch. tangent constraint Selezionare alcune geometrie dello schizzo. - - - + + + Cannot add a tangency constraint at an unconnected point! Non è possibile aggiungere un vincolo di tangenza in un punto non connesso! - - + + Tangent constraint at B-spline knot is only supported with lines! Il vincolo tangente al nodo B-spline è supportato solo con le linee! - + B-spline knot to endpoint tangency was applied instead. È stata invece applicata la tangenza del nodo B-spline sul punto finale. - - + + Wrong number of selected objects! Numero di oggetti selezionati errato! - - + + With 3 objects, there must be 2 curves and 1 point. Con 3 oggetti, ci devono essere 2 curve e 1 punto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Selezionare uno o più archi o cerchi nello schizzo. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Selezionare solo uno o più poli B-Spline o solo uno o più archi o cerchi dallo schizzo, ma non miscelati. - - - + + + Constraint only applies to arcs or circles. Vincolo applicato solo ad archi o cerchi. - - + + Select one or two lines from the sketch. Or select two edges and a point. Selezionare una o due linee dello schizzo, oppure selezionare due bordi e un punto. @@ -3011,88 +3014,88 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Un vincolo di angolo non può essere impostato per due linee parallele. - + Cannot add an angle constraint on an axis! Non è possibile aggiungere un vincolo di angolo su un asse! - + Select two edges from the sketch. Selezionare due spigoli dello schizzo. - + Select two or more compatible edges. Selezionare due o più spigoli compatibili. - + Sketch axes cannot be used in equality constraints. Gli assi dello schizzo non possono essere usati nei vincoli di uguaglianza. - + Equality for B-spline edge currently unsupported. Uguaglianza tra bordi di una B-spline attualmente non è supportato. - - - + + + Select two or more edges of similar type. Seleziona due o più bordi di tipo simile. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selezionare due punti e una linea di simmetria, o due punti e un punto di simmetria, o una linea e un punto di simmetria nello schizzo. - - + + Cannot add a symmetry constraint between a line and its end points. Impossibile aggiungere un vincolo di simmetria tra una linea e i suoi punti finali. - - + + Cannot add a symmetry constraint between a line and its end points! Non è possibile aggiungere un vincolo di simmetria tra una linea e i suoi estremi! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selezionare i due punti finali delle linee da usare come raggi e un bordo che rappresenta il limite. Il primo punto selezionato corrisponde all'indice n1, il secondo a n2 e il valore è definito dal rapporto n2/n1. - + Selected objects are not just geometry from one sketch. Gli oggetti selezionati non sono delle geometrie dello stesso schizzo. - + Cannot create constraint with external geometry only. Impossibile creare il vincolo solo con la geometria esterna. - + Incompatible geometry is selected. Le geometrie selezionate sono incompatibili. + - - - - + + + Select constraints from the sketch. Seleziona i vincoli dallo schizzo. @@ -3114,9 +3117,9 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Definisci il grado B-Spline, tra 1 e %1: - + CAD Kernel Error Errore Kernel CAD @@ -3192,69 +3195,69 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Dovrebbero essere selezionati due punti finali o un punto coincidente. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Selezionare gli elementi da un solo schizzo. - + No constraint selected Nessun vincolo selezionato - + At least one constraint must be selected È necessario selezionare almeno un vincolo - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Una costruzione simmetrica richiede almeno due elementi geometrici, l'ultimo elemento è il riferimento per la costruzione della simmetria. - + The last element must be a point or a line serving as reference for the symmetry construction. L'ultimo elemento deve essere un punto o una linea perchè serve come riferimento per la costruzione della simmetria. - - + + A copy requires at least one selected non-external geometric element Una copia richiede che sia selezionato almeno un elemento geometrico non-esterno - + Delete All Geometry Cancella tutta la geometria - + Are you really sure you want to delete all geometry and constraints? Sei sicuro di voler eliminare tutte le geometrie e i vincoli? - + Delete All Constraints Elimina tutti i vincoli - + Are you really sure you want to delete all the constraints? Sicuro di voler eliminare tutti i vincoli? - + Removal of axes alignment requires at least one selected non-external geometric element La rimozione dell'allineamento degli assi richiede almeno un elemento geometrico non esterno selezionato @@ -3333,7 +3336,12 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Scale parameters - Scale parameters + Parametri di scala + + + + Translate parameters + Translate parameters @@ -3645,12 +3653,12 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Lunghezza: - + Refractive index ratio Indice di rifrazione - + Ratio n2/n1: Rapporto n2/n1: @@ -4063,13 +4071,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Crea serie + Create regular polygon + Poligono regolare - Number of Sides: - Numero di lati: + Number of sides: + Number of sides: @@ -4088,7 +4096,7 @@ reflected on copies Task panel widgets - Task panel widgets + Widget del pannello attività @@ -4171,7 +4179,7 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Dimension constraint - Dimension constraint + Vincolo dimensionale @@ -4205,7 +4213,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + Parametri in vista: @@ -5072,112 +5080,112 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. SketcherGui::ViewProviderSketch - + Edit sketch Modifica lo schizzo - + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - + Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? - + Invalid sketch Schizzo non valido - + Do you want to open the sketch validation tool? Vuoi aprire lo strumento di convalida di schizzo? - + The sketch is invalid and cannot be edited. Lo schizzo non è valido e non può essere modificato. - + Please remove the following constraint: Si prega di rimuovere il seguente vincolo: - + Please remove at least one of the following constraints: Si prega di rimuovere almeno uno dei seguenti vincoli: - + Please remove the following redundant constraint: Si prega di rimuovere il seguente vincolo ridondante: - + Please remove the following redundant constraints: Si prega di rimuovere i seguenti vincoli ridondanti: - + The following constraint is partially redundant: Il seguente vincolo è parzialmente ridondante: - + The following constraints are partially redundant: I seguenti vincoli sono parzialmente ridondanti: - + Please remove the following malformed constraint: Rimuovere il seguente vincolo malformato: - + Please remove the following malformed constraints: Rimuovere i seguenti vincoli malformati: - + Empty sketch Schizzo vuoto - + Over-constrained: Sovravincolato: - + Malformed constraints: Vincoli malformati: - + Redundant constraints: Vincoli ridondanti: - + Partially redundant: Parzialmente ridondante: - + Solver failed to converge Risolutore impossibilitato a convergere - + Under constrained: Sotto vincolati: - + %n DoF(s) %n Grado(i) di libertà @@ -5185,7 +5193,7 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. - + Fully constrained Completamente vincolato @@ -5256,8 +5264,8 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Crea un clone della geometria prendendo come riferimento l'ultimo punto selezionato @@ -5265,17 +5273,17 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_CompCopy - + Clone Clona - + Copy Copia - + Move Sposta @@ -5283,8 +5291,8 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Vincola il diametro di un cerchio o di un arco @@ -5292,8 +5300,8 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fissare il diametro/raggio di un cerchio o di un arco @@ -5301,8 +5309,8 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fissa il raggio di un cerchio o di un arco @@ -5310,8 +5318,8 @@ Questo viene fatto analizzando le geometrie e i vincoli dello schizzo. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Crea una copia semplice della geometria prendendo come riferimento l'ultimo punto selezionato @@ -5595,8 +5603,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Sposta la geometria prendendo come riferimento l'ultimo punto selezionato @@ -5920,7 +5928,7 @@ L'algoritmo di Eigen Sparse QR è ottimizzato per matrici sparsi; solitamente pi ViewProviderSketch - + and %1 more e %1 in più @@ -6150,64 +6158,65 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Errore - + Failed to delete all geometry Impossibile eliminare tutte le geometrie - + Failed to delete all constraints Impossibile eliminare tutti i vincoli - - + + Invalid selection Selezione non valida - + Selection has no valid geometries. La selezione non ha geometrie valide. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6217,18 +6226,18 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Il vincolo ha informazioni sull'indice non valide ed è malformato. - - - - - - - + + + + + + + Invalid Constraint Vincolo non valido @@ -6268,8 +6277,8 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Errore nella creazione del polo B-Spline - + Error creating B-spline Errore nella creazione della Bspline @@ -6325,16 +6334,17 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Impossibile aggiungere la linea - - - - - - - - + + + + + + + + + Tool execution aborted Esecuzione strumento interrotta @@ -6369,9 +6379,9 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Impossibile tagliare il bordo + - Value Error Errore di valore @@ -6423,7 +6433,12 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Failed to scale - Failed to scale + Scalatura non riuscita + + + + Failed to translate + Failed to translate @@ -6624,12 +6639,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Raggio - + Fix the radius of a circle or an arc Fissa il raggio di un cerchio o di un arco @@ -6746,12 +6761,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6813,7 +6828,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Tool parameters - Tool parameters + Parametri dello strumento @@ -6884,12 +6899,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Coincidenza - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6897,12 +6912,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Trasformazione polare - + Rotate selected geometries, making n copies, enable creation of circular patterns. Ruota le geometrie selezionate, facendo n copie, abilita la creazione di modelli circolari. @@ -6969,7 +6984,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Pattern - Pattern + Modello @@ -7011,12 +7026,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of normal edges. - Line pattern of normal edges. + Schema di linea dei bordi normali. Width of normal edges. - Width of normal edges. + Larghezza dei bordi normali. @@ -7041,7 +7056,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Width of construction edges. - Width of construction edges. + Spessore dei bordi di costruzione. @@ -7086,7 +7101,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Width of external edges. - Width of external edges. + Larghezza dei bordi esterni. @@ -7184,7 +7199,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Copie (+'U'/ -'J') @@ -7192,7 +7207,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Numero di pagine (+ 'U' / - 'J') @@ -7200,7 +7215,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Keep original geometries (U) - Keep original geometries (U) + Mantieni le geometrie originali (U) @@ -7208,23 +7223,23 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrain - Constrain + Vincolo Constrain tools. - Constrain tools. + Strumenti vincolo. CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7232,12 +7247,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7245,12 +7260,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7258,14 +7273,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform - Scale transform + Trasformazione scala - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clona vincoli + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index 8cec321880..2a7c7ee32c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone クローン - + Creates a clone of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーのクローンを作成 @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle 円弧や円を拘束する - + Constrain an arc or a circle 円弧や円を拘束する - + Constrain radius 半径拘束 - + Constrain diameter 直径拘束 - + Constrain auto radius/diameter 半径/直径を自動拘束 @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone クローン - + Creates a clone of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーのクローンを作成 @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle 角度を拘束 - + Fix the angle of a line or the angle between two lines 直線の角度または2直線間の角度を拘束 @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident 一致拘束 - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses 点間の一致拘束、または円、円弧、楕円の間の同心拘束を作成 @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter 直径拘束 - + Fix the diameter of a circle or an arc 円または円弧の直径を固定 @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance 距離拘束 - + Fix a length of a line or the distance between a line and a vertex or between two circles 直線の長さ、直線と節点の間の距離、または2つの円の間の距離を拘束 @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance 水平距離拘束 - + Fix the horizontal distance between two points or line ends 2点間または直線端点間の水平距離を拘束 @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance 垂直距離拘束 - + Fix the vertical distance between two points or line ends 2点間または直線端点間の垂直距離を拘束 @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal 等値拘束 - + Create an equality constraint between two lines or between circles and arcs 2直線間または円と円弧間の等値拘束を作成 @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel 平行拘束 - + Create a parallel constraint between two lines 2直線間の平行拘束を作成 @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular 直角拘束 - + Create a perpendicular constraint between two lines 2直線間の垂直拘束を作成 @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object オブジェクト上の点拘束 - + Fix a point onto an object 点をオブジェクト上に拘束 @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter 半径/直径を自動拘束 - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen 円を選択した場合は直径を拘束、円弧/スプラインを選択した場合は半径を拘束 @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) 屈折率拘束（スネルの法則） - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. 光線の2端点と境界のエッジの間に屈折の法則 (スネル則の法則) による拘束を作成 @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical 対称拘束 - + Create a symmetry constraint between two points with respect to a line or a third point 線または第3点に対して、2点間の対称拘束を作成 @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent 正接拘束 - + Create a tangent constraint between two entities 2 つのエンティティ間に正接拘束を作成 @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy コピー - + Creates a simple copy of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーの単純コピーを作成 @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints 全ての拘束を削除 - + Delete all constraints in the sketch スケッチ内の全ての拘束を削除 @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry すべてのジオメトリーを削除 - + Delete all geometry and constraints in the current sketch, with the exception of external geometry 外部ジオメトリーを除き、現在のスケッチ内の全てのジオメトリーと拘束を削除 @@ -1228,12 +1228,12 @@ as mirroring reference. CmdSketcherMove - + Move 移動 - + Moves the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーを移動 @@ -1254,12 +1254,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array 格子状配列 - + Creates a rectangular array pattern of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーの格子状配列パターンを作成 @@ -1267,12 +1267,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment 軸配置を削除 - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection 選択したものの拘束関係を維持したまま軸配置を削除するように拘束を変更 @@ -1295,12 +1295,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry 内部ジオメトリの表示/非表示 - + Show all internal geometry or hide unused internal geometry 全ての内部ジオメトリーを表示、または未使用の内部ジオメトリーを非表示 @@ -1308,8 +1308,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints 競合している拘束を選択 @@ -1317,12 +1317,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints 関連する拘束を選択 - + Select the constraints associated with the selected geometrical elements 選択したジオメトリー要素に関連づけられた拘束を選択 @@ -1330,12 +1330,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry 関連するジオメトリーを選択 - + Select the geometrical elements associated with the selected constraints 選択した拘束に関連付けられたジオメトリー要素を選択 @@ -1343,12 +1343,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF 拘束されていない自由度を選択 - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. ソルバーが未拘束の自由度を検出しているジオメトリー要素を選択 @@ -1356,12 +1356,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis 水平軸を選択 - + Select the local horizontal axis of the sketch スケッチのローカル水平軸を選択 @@ -1369,8 +1369,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints 不正な拘束を選択 @@ -1378,12 +1378,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin 原点を選択 - + Select the local origin point of the sketch スケッチのローカル原点を選択 @@ -1391,8 +1391,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints 部分的に冗長な拘束を選択 @@ -1400,8 +1400,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints 冗長な拘束を選択 @@ -1409,12 +1409,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis 垂直軸を選択 - + Select the local vertical axis of the sketch スケッチのローカル垂直軸を選択 @@ -1461,12 +1461,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry 対称 - + Creates symmetric geometry with respect to the last selected line or point 最後に選択した線分や点に対して対称ジオメトリーを作成 @@ -1474,12 +1474,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint 拘束をアクティブ化/非アクティブ化 - + Activates or deactivates the selected constraints 選択した拘束をアクティブ化・非アクティブ化 @@ -1500,12 +1500,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint 駆動拘束/参照拘束の切り替え - + Set the toolbar, or the selected constraints, into driving or reference mode ツールバー、または選択した拘束を駆動モードまたは参照モードに設定 @@ -1592,54 +1592,54 @@ invalid constraints, degenerated geometry, etc. 固定拘束を追加 - + Add 'Block' constraint 「ブロック」拘束を追加 - + Add block constraint ブロック拘束を追加 - - + + Add coincident constraint 一致拘束を追加 - - + + Add distance from horizontal axis constraint 水平軸からの距離拘束を追加 - - + + Add distance from vertical axis constraint 垂直軸からの距離拘束を追加 - - + + Add point to point distance constraint 点間の距離拘束を追加 - - + + Add point to line Distance constraint 点と線の間の距離拘束を追加 - - + + Add circle to circle distance constraint 円と円の間の距離拘束を追加 - + Add circle to line distance constraint 円と線の間の距離拘束を追加 @@ -1648,8 +1648,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint 寸法拘束を追加 @@ -1771,159 +1771,159 @@ invalid constraints, degenerated geometry, etc. Y軸方向の距離拘束を追加 - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint オブジェクト上への点の拘束を追加 - - + + Add point to point horizontal distance constraint 点間の水平距離拘束を追加 - + Add fixed x-coordinate constraint X座標固定拘束を追加 - - + + Add point to point vertical distance constraint 点間の垂直距離拘束を追加 - + Add fixed y-coordinate constraint Y座標固定拘束を追加 - - + + Add parallel constraint 並行拘束を追加 - - - - - - - + + + + + + + Add perpendicular constraint 直角拘束を追加 - + Add perpendicularity constraint 垂直拘束を追加 - + Swap coincident+tangency with ptp tangency 点間正接によって一致と正接を入れ替え - + Swap PointOnObject+tangency with point to curve tangency 点曲線間正接によってオブジェクト上点と正接を入れ替え - - - - - - - + + + + + + + Add tangent constraint 正接拘束を追加 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point 正接拘束点を追加 - - - - + + + + Add radius constraint 半径拘束を追加 - - - - + + + + Add diameter constraint 直径拘束を追加 - - - - + + + + Add radiam constraint 径拘束を追加 - - - - + + + + Add angle constraint 角度拘束を追加 - - + + Add equality constraint 等値拘束を追加 - - - - - + + + + + Add symmetric constraint 対称拘束を追加 - + Add Snell's law constraint スネル則拘束を追加 - + Toggle constraint to driving/reference 拘束の駆動/参照を切り替え - + Activate/Deactivate constraint 拘束をアクティブ化/非アクティブ化 @@ -2094,47 +2094,47 @@ invalid constraints, degenerated geometry, etc. 曲線を結合 - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry 内部ジオメトリーを表示 - + Create symmetric geometry 対称ジオメトリーを作成 - + Copy/clone/move geometry ジオメトリーのコピー/クローン/移動 - + Create copy of geometry ジオメトリーのコピーを作成 - + Delete all geometry すべてのジオメトリーを削除 - + Delete All Constraints 拘束を削除する - + Remove Axes Alignment 軸配置を削除 @@ -2152,8 +2152,8 @@ invalid constraints, degenerated geometry, etc. 拘束の仮想スペースを更新 - + Add auto constraints 自動拘束を追加 @@ -2168,22 +2168,22 @@ invalid constraints, degenerated geometry, etc. スケッチ拘束の名前を変更 - + Drag Point 点をドラッグ - + Drag Curve 曲線をドラッグ - + Drag Constraint 拘束をドラッグ - + Modify sketch constraints スケッチ拘束を変更 @@ -2222,6 +2222,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2326,16 +2331,16 @@ invalid constraints, degenerated geometry, etc. B-スプラインパラメーターの範囲外にノットを挿入することはできません。 - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2401,20 +2406,8 @@ invalid constraints, degenerated geometry, etc. アタッチしない - - - - - - - - - - - - @@ -2425,133 +2418,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection 誤った選択 @@ -2626,8 +2630,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint 二重拘束 @@ -2643,8 +2647,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! 選択されたエッジにはすでにブロック拘束が設定されています！ @@ -2656,7 +2660,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. スケッチから頂点を選択 @@ -2681,29 +2685,29 @@ invalid constraints, degenerated geometry, etc. スケッチが求解されていない場合や冗長/競合する拘束がある場合はブロック拘束を追加できません。 - + Select one edge from the sketch. スケッチから1本のエッジを選択 - + Select only edges from the sketch. スケッチからエッジのみを選択 - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 選択したオブジェクトの数が3ではありません。 + - Error エラー @@ -2718,75 +2722,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. 代わりに端点間の正接拘束が適用されました。 - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. スケッチから一致拘束のための複数の頂点、または同心拘束のための複数の円、楕円、円弧、楕円弧を選択してください。 - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. スケッチから一致拘束のための2頂点、または同心拘束のための2つの円、楕円、円弧、楕円弧を選択してください。 - + Select exactly one line or one point and one line or two points from the sketch. スケッチから1直線または1点と1直線または2点を選択してください - + Cannot add a length constraint on an axis! 軸に対して長さ拘束を追加することはできません！ - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. スケッチから1直線、1点と1直線、2点、または2円を選択してください。 - + This constraint does not make sense for non-linear curves. この拘束は非線形な曲線に対して無効です。 - + Endpoint to edge tangency was applied instead. 代わりに端点とエッジの正接拘束が適用されました。 - - - - - - + + + + + + Select the right things from the sketch. スケッチから正しい対象を選択してください。 - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. B-スプラインの重みではないエッジを選択してください。 @@ -2796,93 +2800,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. 選択した点をそれぞれの曲線上に拘束することができません。同じ要素の一部であるか、両方とも外部ジオメトリーであるか、適切なエッジでないことが原因です。 - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 選択した点をそれぞれの曲線上に拘束することができません。同じ要素のパーツであるか、両方とも外部ジオメトリーであることが原因です。 - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. スケッチから1直線または2つ以下の点を選択してください - + Cannot add a horizontal length constraint on an axis! 軸に対して水平距離拘束を追加することはできません！ - + Cannot add a fixed x-coordinate constraint on the origin point! 原点に対してX座標を固定する拘束を追加することはできません！ - - + + This constraint only makes sense on a line segment or a pair of points. この拘束は1線分または点ペアに対してのみ有効です。 - + Cannot add a vertical length constraint on an axis! 軸に対して垂直距離拘束を追加することはできません！ - + Cannot add a fixed y-coordinate constraint on the origin point! 原点に対してY座標を固定する拘束を追加することはできません！ - + Select two or more lines from the sketch. スケッチから2本以上の直線を選択してください - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. スケッチから2本以上の直線を選択してください - - Select a valid line. - 有効な直線を選択してください。 - - - - + The selected edge is not a valid line. 選択されたエッジは有効な直線ではありません。 - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2892,35 +2895,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可能な組み合わせ： 2曲線; 1端点と1曲線; 2端点; 2曲線と1点 - + Select some geometry from the sketch. perpendicular constraint スケッチから幾つかのジオメトリを選択してください。 - - + + Cannot add a perpendicularity constraint at an unconnected point! 接続していない点に対して垂直拘束を追加することはできません！ - - + + One of the selected edges should be a line. 選択されているエッジの1つが直線である必要があります - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 端点間の正接拘束が適用されました。一致拘束は削除されました。 - + Endpoint to edge tangency was applied. The point on object constraint was deleted. 端点とエッジの正接拘束が適用されました。点のオブジェクト上への拘束は削除されました。 - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2930,67 +2933,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可能な組み合わせ: 2曲線; 端点と曲線; 2端点; 2曲線と1点 - + Select some geometry from the sketch. tangent constraint スケッチから幾つかのジオメトリを選択してください。 - - - + + + Cannot add a tangency constraint at an unconnected point! 接続されていない点に対して正接拘束を追加することはできません！ - - + + Tangent constraint at B-spline knot is only supported with lines! B-スプラインのノットでの接線拘束は線でのみサポートされています! - + B-spline knot to endpoint tangency was applied instead. 代わりにB-スプラインのノットと端点の正接拘束が適用されました。 - - + + Wrong number of selected objects! 選択したオブジェクトの数が正しくありません ！ - - + + With 3 objects, there must be 2 curves and 1 point. 使用される3オブジェクトは2つの曲線と1つの点である必要があります。 - - - - - - + + + + + + Select one or more arcs or circles from the sketch. スケッチから 1 つ以上の円弧または円を選択してください。 - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. 1つ以上のB-スプラインの極、または1つ以上の円・円弧をスケッチから選択してください。ただし混在はできません。 - - - + + + Constraint only applies to arcs or circles. 円弧または円のみに適用される拘束です。 - - + + Select one or two lines from the sketch. Or select two edges and a point. スケッチから1本か2本の線分を選択してください。あるいは2つのエッジと頂点を選択します。 @@ -3005,88 +3008,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c ２つの平行線に角度拘束を設定できません。 - + Cannot add an angle constraint on an axis! 軸に対して角度拘束を追加することはできません！ - + Select two edges from the sketch. スケッチから2本のエッジを選択してください - + Select two or more compatible edges. 複数の互換性のあるエッジを選択してください。 - + Sketch axes cannot be used in equality constraints. スケッチ軸を等値拘束で使用することはできません。 - + Equality for B-spline edge currently unsupported. B-スプラインエッジの等値拘束は現在サポートされていません。 - - - + + + Select two or more edges of similar type. 複数の同じタイプのエッジを選択してください。 - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 2つの点と対称線、2つの点と対称点、あるいは1本の直線と対称点をスケッチから選択してください。 - - + + Cannot add a symmetry constraint between a line and its end points. 直線とその端点間に対称拘束を追加することはできません。 - - + + Cannot add a symmetry constraint between a line and its end points! 直線とその端点間に対称拘束を追加することはできません！ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 光線として使用される直線の2端点と境界を表すエッジを選択してください。1つ目に選択された点がインデックスn1、2つ目の点がインデックスn2と対応し、データ値は比n2/n1を設定します。 - + Selected objects are not just geometry from one sketch. 選択されたオブジェクトは1つのスケッチから成るジオメトリーではありません。 - + Cannot create constraint with external geometry only. 外部ジオメトリーのみからなる拘束を作成することはできません。 - + Incompatible geometry is selected. 互換性のないジオメトリーが選択されています。 + - - - - + + + Select constraints from the sketch. スケッチから拘束を選択 @@ -3108,9 +3111,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 1から %1 の間でB-スプラインの次数を定義してください: - + CAD Kernel Error CADカーネルエラー @@ -3186,69 +3189,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 2端点、または一致点を選択する必要があります。 - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. 1つのスケッチから要素を選択してください。 - + No constraint selected 拘束が選択されていません - + At least one constraint must be selected 拘束には1つ以上を選択する必要があります - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. 対称構造では少なくとも 2 つのジオメトリー要素が必要で、最後のジオメトリー要素が対称構造の参照となります。 - + The last element must be a point or a line serving as reference for the symmetry construction. 対称構造のための参照として使用される最後の要素は点または線である必要があります。 - - + + A copy requires at least one selected non-external geometric element コピーをするには、非外部ジオメトリー要素を1つ以上選択する必要があります。 - + Delete All Geometry 全てのジオメトリーを削除 - + Are you really sure you want to delete all geometry and constraints? 全てのジオメトリーと拘束を削除します。よろしいですか？ - + Delete All Constraints 拘束を削除する - + Are you really sure you want to delete all the constraints? 全ての拘束を削除します。よろしいですか？ - + Removal of axes alignment requires at least one selected non-external geometric element 軸配置を除去するには、非外部ジオメトリー要素を1つ以上選択する必要があります。 @@ -3329,6 +3332,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3639,12 +3647,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 長さ: - + Refractive index ratio 屈折率 - + Ratio n2/n1: 比 n2/n1: @@ -4057,13 +4065,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - 配列を作成 + Create regular polygon + 正多角形を作成 - Number of Sides: - 側面の数： + Number of sides: + Number of sides: @@ -5064,119 +5072,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch スケッチを編集 - + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - + Do you want to close this dialog? このダイアログを閉じますか？ - + Invalid sketch スケッチが無効です - + Do you want to open the sketch validation tool? スケッチ検証ツールを起動しますか? - + The sketch is invalid and cannot be edited. スケッチが不正で、編集できません。 - + Please remove the following constraint: 以下の拘束を削除してください: - + Please remove at least one of the following constraints: 以下の拘束から少なくとも1つを削除してください: - + Please remove the following redundant constraint: 以下の不要な拘束を削除してください: - + Please remove the following redundant constraints: 以下の不要な拘束を削除してください: - + The following constraint is partially redundant: 以下の拘束は一部が冗長です: - + The following constraints are partially redundant: 以下の拘束は一部が冗長です: - + Please remove the following malformed constraint: 次の不正な拘束を削除してください: - + Please remove the following malformed constraints: 次の不正な拘束を削除してください: - + Empty sketch スケッチが空です - + Over-constrained: 過剰拘束: - + Malformed constraints: 不正な拘束: - + Redundant constraints: 冗長な拘束: - + Partially redundant: 部分的に冗長: - + Solver failed to converge ソルバーの収束に失敗 - + Under constrained: 拘束中: - + %n DoF(s) %n 自由度 - + Fully constrained 完全拘束 @@ -5247,8 +5255,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーのクローンを作成 @@ -5256,17 +5264,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone クローン - + Copy コピー - + Move 移動 @@ -5274,8 +5282,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 円または円弧の直径を固定 @@ -5283,8 +5291,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc 円または円弧の半径/直径を固定 @@ -5292,8 +5300,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 円または円弧の半径を固定 @@ -5301,8 +5309,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーの単純コピーを作成 @@ -5587,8 +5595,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point 最後に選択された点を参照位置としてジオメトリーを移動 @@ -5911,7 +5919,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more %1 以上 @@ -6141,64 +6149,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error エラー - + Failed to delete all geometry すべてのジオメトリーを削除することができませんでした。 - + Failed to delete all constraints すべての拘束を削除することができませんでした。 - - + + Invalid selection 無効な選択です。 - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6208,18 +6217,18 @@ The grid spacing change if it becomes smaller than this number of pixel.この拘束には無効なインデックス情報が含まれており、形式が正しくありません。 - - - - - - - + + + + + + + Invalid Constraint 拘束が正しくありません。 @@ -6259,8 +6268,8 @@ The grid spacing change if it becomes smaller than this number of pixel.B-スプラインの極の作成エラー - + Error creating B-spline B-スプラインの作成エラー @@ -6316,16 +6325,17 @@ The grid spacing change if it becomes smaller than this number of pixel.線を追加できませんでした。 - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6360,9 +6370,9 @@ The grid spacing change if it becomes smaller than this number of pixel.エッジをトリムできませんでした。 + - Value Error 値エラー @@ -6416,6 +6426,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6615,12 +6630,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius 半径拘束 - + Fix the radius of a circle or an arc 円または円弧の半径を固定 @@ -6737,12 +6752,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6875,12 +6890,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident 一致拘束 - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6888,12 +6903,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7210,12 +7225,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7223,12 +7238,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7236,12 +7251,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7249,14 +7264,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts index 07c0c2f5ea..d6e36e64d4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone ასლი - + Creates a clone of the geometry taking as reference the last selected point ქმნის გეომეტრიის ასლს, საბაზისოდ ბოლოს მონიშნული წერტილით @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle რკალის ან წრის შეზღუდვა - + Constrain an arc or a circle რკალის ან წრის შეზღუდვა - + Constrain radius რადიუსის სეზღუდვა - + Constrain diameter დიამეტრის შეზღუდვა - + Constrain auto radius/diameter ავტომატური რადიუსის/დიამეტრის შეზღუდვა @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone კლონი - + Creates a clone of the geometry taking as reference the last selected point ქმნის გეომეტრიის ასლს, საბაზისოდ ბოლოს მონიშნული წერტილით @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle კუთხის შეზღუდვა - + Fix the angle of a line or the angle between two lines ხაზის ან ორ ხაზს შორს კუთხის დაფიქსირება @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident დამთხვევის შეზღუდვა - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses წერტილებს შორის დამთხვევის ან წრეწირებს, რკალებსა და ოვალებს შორის კონცენტრულობის შეზღუდვის შექმნა @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter დიამეტრის შეზღუდვა - + Fix the diameter of a circle or an arc წრის ან რკალის რადიუსის გასწორება @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance დაშორების შეზღუდვა - + Fix a length of a line or the distance between a line and a vertex or between two circles დააყენეთ ხაზის სიგრძე ან მანძილი ხაზსა და წვეროს ან ორ წრეწირს შორის @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance ჰორიზონტალური დაშორების შეზღუდვა - + Fix the horizontal distance between two points or line ends ორ წერტილს ან ხაზის ბოლოებს შორის ჰორიზონტალური დაშორების ფიქსირება @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance ვერტიკალური დაშორების შეზღუდვა - + Fix the vertical distance between two points or line ends ორ წერტილს ან ხაზის ბოლოებს შუა დაშორების ფიქსირება @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal ტოლობით შეზღუდვა - + Create an equality constraint between two lines or between circles and arcs ორ ხაზს ან წრეწირსა და რკალებს შორის თანასწორობის შეზღუდვის შექმნა @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel პარალელურობის შეზღუდვა - + Create a parallel constraint between two lines ორ ხაზს შორის პარალელურობის შეზღუდვის შექმნა @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular მართობულობის შეზღუდვა - + Create a perpendicular constraint between two lines ორ ხაზს შორის მართობის შეზღუდვის შექმნა @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object წერტილის ობიექტზე დამაგრება - + Fix a point onto an object წერტილის ობიექტზე მიმაგრება @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter ავტომატური რადიუსის/დიამეტრის შეზღუდვა - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen თუ წრეწირს აირჩევთ, დიამეტრი უცვლელი იქნება, თუ რკალს/სპლაინის პოლუსი - რადიუსი @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) არეკვლის შეზღუდვა (სნელის კანონი) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. სხივების ორ ბოლო წერტილსა და წიბოს, როგორც საკონტაქტო ზედაპირს შორის გარდატეხის კანონის (სნელის კანონი) შეზღუდვის შექმნა. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical სიმეტრიულობის შეზღუდვა - + Create a symmetry constraint between two points with respect to a line or a third point სიმეტრიის შეზღუდვის შექმნა ორ წერტილს შორის @@ -601,12 +601,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent მხების შეზღუდვა - + Create a tangent constraint between two entities ორი ობიექტს შორის მხების შეზღუდვის შექმნა @@ -640,12 +640,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy კოპირება - + Creates a simple copy of the geometry taking as reference the last selected point ქმნის გეომეტრიის მარტივ ასლს, საბაზისოდ ბოლოს მონიშნული წერტილით @@ -785,7 +785,7 @@ with respect to a line or a third point Create fillet - მომრგვალების შექმნა + მომრგვალებული ნაზოლის შექმნა @@ -1019,7 +1019,7 @@ with respect to a line or a third point Decrease knot multiplicity - კვანძის ჯერადობის შემცირება + კვანძის გამრავლებადობის შემცირება @@ -1030,12 +1030,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints ყველა შეზღუდვის წაშლა - + Delete all constraints in the sketch ესკიზის ყველა შეზღუდვის წაშლა @@ -1043,12 +1043,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry მთელი გეომეტრიის წაშლა - + Delete all geometry and constraints in the current sketch, with the exception of external geometry მიმდინარე ესკიზზე ყველა გეომეტრიისა და შეზღუდვის წაშლა, გარე გეომეტრიის გარდა @@ -1110,7 +1110,7 @@ with respect to a line or a third point Increase knot multiplicity - კვანძის ჯერადობის გაზრდა + კვანძის გამრავლებადობის გაზრდა @@ -1231,12 +1231,12 @@ X და Y ღერძებით და საწყისი წერტი CmdSketcherMove - + Move გადატანა - + Moves the geometry taking as reference the last selected point გეომეტრიების გადატანა ორიენტირად ბოლოს მონიშნული წერტილის გამოყენებით @@ -1257,12 +1257,12 @@ X და Y ღერძებით და საწყისი წერტი CmdSketcherRectangularArray - + Rectangular array მართკუთხედი მასივი - + Creates a rectangular array pattern of the geometry taking as reference the last selected point ქმნის გეომეტრიის მართკუთხა მასივის შაბლონს, მიმართვად ბოლო არჩეული წერტილის გამოყენებით @@ -1270,12 +1270,12 @@ X და Y ღერძებით და საწყისი წერტი CmdSketcherRemoveAxesAlignment - + Remove axes alignment ღერძების სწორების მოცილება - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection ცვლის შეზღუდვებს ღერძების სწორების წასაშლელად მონიშნულთან შეზღუდვის ურთიერთობის შენარჩუნების მცდელობის ფონზე @@ -1298,12 +1298,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry შიდა გეომეტრიის ხილვადობის ჩართ/გამორთ - + Show all internal geometry or hide unused internal geometry სრული შიდა გეომეტრიის ჩვენება ან გამოუყენებელი შიდა გეომეტრიის დამალვა @@ -1311,8 +1311,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints კონფლიქტური შეზღუდვების მონიშვნა @@ -1320,12 +1320,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints ასოცირებული შეზღუდვების მონიშვნა - + Select the constraints associated with the selected geometrical elements მონიშნულ გეომეტრიულ ელემენტებზე მიბმული შეზღუდვების მონიშვნა @@ -1333,12 +1333,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry მიბმული გეომეტრიის მონიშვნა - + Select the geometrical elements associated with the selected constraints მონიშნულ შეზღუდვებთან ასოცირებული გეომეტრიული ელემენტების მონიშვნა @@ -1346,12 +1346,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF აირჩიეთ შეუზღუდავი თხ - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. აირჩიეთ გეომეტრიული ელემენტები, სადაც ამომხსნელი ჯერ კიდევ პოულობს შეუზღუდავ თავისუფლების ხარისხებს. @@ -1359,12 +1359,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis ჰორიზონტალური ღერძის მონიშვნა - + Select the local horizontal axis of the sketch ესკიზის ლოკალური ჰორიზონტალური ღერძის არჩევა @@ -1372,8 +1372,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints არასწორი შეზღუდვების მონიშვნა @@ -1381,12 +1381,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin აირჩიეთ წყარო - + Select the local origin point of the sketch აირჩიეთ ესკიზის ლოკალური კოორდინატების საწყისი წერტილი @@ -1394,8 +1394,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints ნაწილობრივ დამატებითი შეზღუდვების მონიშვნა @@ -1403,8 +1403,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints დამატებითი შეზღუდვების მონიშვნა @@ -1412,12 +1412,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis ვერტიკალური ღერძის არჩევა - + Select the local vertical axis of the sketch ესკიზის ლოკალური ვერტიკალური ღერძის არჩევა @@ -1464,12 +1464,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry სიმეტრია - + Creates symmetric geometry with respect to the last selected line or point ქმნის სიმეტრიულ გეომეტრიას ბოლოს არჩეულ ხაზთან ან წერტილთან დამოკიდებულებით @@ -1477,12 +1477,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint შეზღუდვის აქტივაცია/დეაქტივაცია - + Activates or deactivates the selected constraints მონიშნული შეზღუდვების ჩართ/გამორთ @@ -1503,12 +1503,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint მშენებლობის/მიმართვის შეზღუდვის გადართვა - + Set the toolbar, or the selected constraints, into driving or reference mode ხელსაწყოთა პანელის, ან მონიშნული შეზღუდვების @@ -1597,54 +1597,54 @@ invalid constraints, degenerated geometry, etc. ფიქსირებული შეზღუდვის დამატება - + Add 'Block' constraint 'ბლოკის' ტიპის შეზღუდვის დამატება - + Add block constraint ბლოკის შეზღუდვის დამატება - - + + Add coincident constraint დამთხვევის შეზღუდვის დამატება - - + + Add distance from horizontal axis constraint ჰორიზონტალური ღერძის შეზღუდვამდე მანძილის დამატება - - + + Add distance from vertical axis constraint ვერიკალურ ღერძამდე მანძილის შეზღუდვის დამატება - - + + Add point to point distance constraint წერტილიდან წერტილამდე მანძილის შეზღუდვის დამატება - - + + Add point to line Distance constraint წერტილიდან ხაზამდე დაშორების შეზღუდვის დამატება - - + + Add circle to circle distance constraint წრეწირიდან წრეწირამდე მანძილის შეზღუდვის დამატება - + Add circle to line distance constraint წრეწირიდან ხაზამდე მანძილის შეზღუდვის დამატება @@ -1653,8 +1653,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint სიგრძის შეზღუდვის დამატება @@ -1776,159 +1776,159 @@ invalid constraints, degenerated geometry, etc. Y დაშორების შეზღუდვის დამატება - + Add point to circle Distance constraint წერტილიდან წრეწირამდე დაშორების შეზღუდვის დამატება - - + + Add point on object constraint ობექტის შეზღუდვაზე წერტილის დამატება - - + + Add point to point horizontal distance constraint წერტილიდან წერტილამდე ჰორიზონტალური მანძილის შეზღუდვის დამატება - + Add fixed x-coordinate constraint X-კოორდინატის ფიქსირებული შეზღუდვის დამატება - - + + Add point to point vertical distance constraint წერტილიდან წერტილამდე ვერტიკალური მანძილის შეზღუდვის დამატება - + Add fixed y-coordinate constraint Y-კოორდინატის ფიქსირებული შეზღუდვის დამატება - - + + Add parallel constraint პარალელურობის შეზღუდვის დამატება - - - - - - - + + + + + + + Add perpendicular constraint მართკუთხა შეზღუდვის დამატება - + Add perpendicularity constraint მართკუთხობის სეზღუდვის დამატება - + Swap coincident+tangency with ptp tangency დამთხვევის+მხების ptp მხებთან მიმოცვლა - + Swap PointOnObject+tangency with point to curve tangency PointOnObject+მხების მიმოცვლა მრუდის მხების წერტილთან - - - - - - - + + + + + + + Add tangent constraint მხების შეზღუდვის დამატება - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point მხების შეზღუდვის წერტილის დამატება - - - - + + + + Add radius constraint რადიუსის შეზღუდვის დამატება - - - - + + + + Add diameter constraint დიამეტრის შეზღუდვის დამატება - - - - + + + + Add radiam constraint რადიამის შეზღუდვის დამატება - - - - + + + + Add angle constraint კუთხის შეზღუდვის დამატება - - + + Add equality constraint ტოლობის შეზღუდვის დამატება - - - - - + + + + + Add symmetric constraint სიმეტრიულობის შეზღუდვის დამატება - + Add Snell's law constraint სნელის კანონის შეზღუდვის დამატება - + Toggle constraint to driving/reference მშენებლობის/მიმართვის შეზღუდვის გადართვა - + Activate/Deactivate constraint შეზღუდვის აქტივაცია/დეაქტივაცია @@ -2036,7 +2036,7 @@ invalid constraints, degenerated geometry, etc. Create fillet - მომრგვალებული ნაზოლის შექმნა + მომრგვალების შექმნა @@ -2081,12 +2081,12 @@ invalid constraints, degenerated geometry, etc. Increase knot multiplicity - კვანძის გამრავლებადობის გაზრდა + კვანძის ჯერადობის გაზრდა Decrease knot multiplicity - კვანძის გამრავლებადობის შემცირება + კვანძის ჯერადობის შემცირება @@ -2099,47 +2099,47 @@ invalid constraints, degenerated geometry, etc. მრუდების შეერთება - + Cut in Sketcher - Cut in Sketcher + ამოჭრა ესკიზში - + Paste in Sketcher - Paste in Sketcher + ესკიზში ჩასმა - + Exposing Internal Geometry შიდა გეომეტრიის ჩვენება - + Create symmetric geometry სიმეტრიული გეომეტრიის შექმნა - + Copy/clone/move geometry გეომეტრიის კოპირება/ასლი/გადატანა - + Create copy of geometry გეომეტრიის ასლის შექმნა - + Delete all geometry მთელი გეომეტრიის წაშლა - + Delete All Constraints ყველა შეზღუდვის წაშლა - + Remove Axes Alignment ღერძების სწორების მოცილება @@ -2157,8 +2157,8 @@ invalid constraints, degenerated geometry, etc. შეზღუდვის ვირტუალური სივრცის განახლება - + Add auto constraints ავტომატური შეზღუდვების დამატება @@ -2173,22 +2173,22 @@ invalid constraints, degenerated geometry, etc. ესკიზის შეზღუდვისთვის სახელის გადარქმევა - + Drag Point გადაათრიეთ წერტილი - + Drag Curve რკალის გადათრევა - + Drag Constraint შეზღუდვის გადათრევა - + Modify sketch constraints ესკიზის შეზღუდვების ჩასწორება @@ -2225,7 +2225,12 @@ invalid constraints, degenerated geometry, etc. Scale geometries - Scale geometries + გეომეტრიების მასშტაბი + + + + Translate geometries + Translate geometries @@ -2331,16 +2336,16 @@ invalid constraints, degenerated geometry, etc. კვანძის ჩასმა B-სპლაინის პარამეტრების დიაპაზონის გარეთ შეუძლებელია. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range პარამეტრი ToolWidget დასაშვებ შუალედს გარეთაა @@ -2406,20 +2411,8 @@ invalid constraints, degenerated geometry, etc. არ მიამაგრო - - - - - - - - - - - - @@ -2430,135 +2423,146 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection - არასწორი არჩევანი + არასწორი მონიშნული @@ -2631,8 +2635,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint ორმაგი შეზღუდვა @@ -2648,8 +2652,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! მონიშნულ წიბოს უკვე ადევს შეზღუდვის ბლოკი! @@ -2661,7 +2665,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. ესკიზზე წვეროების მონიშვნა. @@ -2686,29 +2690,29 @@ invalid constraints, degenerated geometry, etc. დაბლოკვის შეზღუდვას ვერ დაამატებთ, თუ ესკიზი ამოუხსნელია ან არსებობს დამატებითი, ან ურთიერთგამომრიცხავი შეზღუდვები. - + Select one edge from the sketch. ესკიზიდან მონიშნეთ ერთი წიბო. - + Select only edges from the sketch. ესკიზიდან მონიშნეთ მხოლოდ წიბოები. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + B-სპლაინთან ერთად, მხოლოდ, მხები-წერტილის-გავლითაა მხარდაჭერილი. - + Number of selected objects is not 3 მონიშნული ობიექტების რიცხვი არ უდრის სამს + - Error შეცდომა @@ -2723,171 +2727,170 @@ invalid constraints, degenerated geometry, etc. არჩეული ელემენტ(ებ)-ი ვერ მიიღებს ჰორიზონტალურ ან ვერტიკალურ შეზღუდვას! - + Endpoint to endpoint tangency was applied instead. სამაგიეროდ გამოყენებულია ბოლო წერტილიდან ბოლო წერტილთან მხები. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. დამთხვევის შეზღუდვისთვის ესკიზიდან აირჩიეთ ორი წვერო ან მეტი წვერო, ან, კონცენტრული შეზღუდვისთვის, ორი ან მეტი წრეწირი, ოვალები, რკალები ან ოვალის რკალები. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. დამთხვევის შეზღუდვისთვის ესკიზიდან აირჩიეთ ორი წვერო, ან, კონცენტრული შეზღუდვისთვის, ორი წრეწირი, ოვალები, რკალები ან ოვალის რკალები. - + Select exactly one line or one point and one line or two points from the sketch. ესკიზიდან აირჩიეთ მხოლოდ ერთი ხაზი ან ერთი წერტილი და ერთი ხაზი ან ორი წერტილი. - + Cannot add a length constraint on an axis! ღერძზე სიგრძის შეზღუდვის დაწესება შეუძლებელია! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. ესკიზიდან აირჩიეთ მხოლოდ ერთი ხაზი ან ერთი წერტილი და ერთი ხაზი ან ორი წერტილი ან ორი წრეწირი. - + This constraint does not make sense for non-linear curves. ამ შეზღუდვას აზრი არ აქვს არახაზოვანი მრუდებისთვის. - + Endpoint to edge tangency was applied instead. სამაგიეროდ გამოყენებულია ბოლო წერტილიდან წიბოსთნ მხები. - - - - - - + + + + + + Select the right things from the sketch. ესკიზიდან სწორი რამეების არჩევა. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. აირჩიეთ წიბო, რომელიც არაა B-სპლაინის წონა. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + წაიშალა ერთი ან ორი წერტილი ობიექტის შეზღუდვაზე, რადგან უკანასკნელი გადატარებული შეზღუდვა შინაგანად შეცვლის ობიექტზე მყოფ წერტილებსაც. - + Select either several points, or several conics for concentricity. აირჩიეთ ან რამდენიმე წერტილი, ან რამდენიმე კონიკური კონცენტრულობისთვს. - + Select either one point and several curves, or one curve and several points აირჩიეთ ან ერთი წერტილი და რამდენიმე მრუდი, ან ერთ მრუდი და რამდენიმე წერტილი - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. მონიშნეთ ან ერთ წერტილი და რამდენიმე მრუდი ან ერთი რუდი და რამდენიმე წერტილი ხელსაწყოსთვის წერტილი ობიექტზე, ან რამდენიმე წერტილი დამთხვევისთვის, ან რამდენიმე კონუსი კონცენტრულობისთვის. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. არცერთი მონიშნული წერტილი არ შემოიფარგლება შესაბამის მრუდებზე, რადგან ისინი ერთი და იგივე ელემენტის ნაწილებია, რადგან ორივე გარე გეომეტრიაა, ან იმიტომ, რომ წიბო დაუშვებელია. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. არცერთი მონიშნული წერტილი არ შემოიფარგლება შესაბამის მრუდებზე. ისინი ან ერთი და იგივე ელემენტის ნაწილებია, ან გარე გეომეტრიის ნაწილს წარმოადგენენ. - + Cannot add a length constraint on this selection! ამ მონიშნულზე სიგრძის შეზღუდვის დაწესება შეუძლებელია! - - - - + + + + Select exactly one line or up to two points from the sketch. ესკიზიდან აირჩიეთ ზუსტად ერთი ხაზი ან ორი წერტილი. - + Cannot add a horizontal length constraint on an axis! ღერძზე ჰორიზონტალური სიგრძის შეზღუდვის დაწესება შეუძლებელია! - + Cannot add a fixed x-coordinate constraint on the origin point! საწყის წერტილზე ფიქსირებული X-კოორდინატის შეზღუდვის დამატება შეუძლებელია! - - + + This constraint only makes sense on a line segment or a pair of points. ამ შეზღუდვას აზრი მხოლოდ ხაზის სეგმენტზე ან წერტილების წყვილზე აქვს. - + Cannot add a vertical length constraint on an axis! ღერძზე ვერტიკალური სიგრძის შეზღუდვის დაწესება შეუძლებელია! - + Cannot add a fixed y-coordinate constraint on the origin point! საწყის წერტილზე ფიქსირებული Y-კოორდინატის შეზღუდვის დამატება შეუძლებელია! - + Select two or more lines from the sketch. ესკიზიდან აირჩიეთ ორი ან მეტი ხაზი. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. მონიშნეთ მინიმუმ 2 ხაზი. - - Select a valid line. - აირჩიეთ ნამდვილი ხაზი. - - - - + The selected edge is not a valid line. მონიშნული წიბო სწორ ხაზს არ წარმოადგენს. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c მხარდაჭერილი კომბინაციებია: ორი მრუდი; ან ბოლო წერტილი და მრუდი; ან ორი ბოლო წერტილი; ან ორი მრუდი და წერტილი. - + Select some geometry from the sketch. perpendicular constraint ესკიზიდან მონიშნეთ რამე გეომეტრია. - - + + Cannot add a perpendicularity constraint at an unconnected point! დაუკავშირებელ წერტილზე მართობული შეზღუდვის დამატება შეუძლებელია! - - + + One of the selected edges should be a line. ერთი მონიშნული წიბოებიდან ხაზი უნდა იყოს. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. ბოლო წერტილიდან წერტილამდე მხები გადატარებულია. დამთხვევის შეზღუდვა წაშლილია. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. ბოლო წერტილიდან წიბომდე მხები გადატარებულია. წერტილი ობიექტის შეზღუდვაზე წაშლილია. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c მხარდაჭერილი კომბინაციებია: ორი მრუდი; ან ბოლო წერტილი და მრუდი; ან ორი ბოლო წერტილი; ან ორი მრუდი და წერტილი. - + Select some geometry from the sketch. tangent constraint ესკიზიდან მონიშნეთ რამე გეომეტრია. - - - + + + Cannot add a tangency constraint at an unconnected point! დაუკავშირებელ წერტილზე მხების შეზღუდვის დამატება შეუძლებელია! - - + + Tangent constraint at B-spline knot is only supported with lines! მხების მზღუდავი B-სპლაინის კვანძთან მხოლოდ ხაზებითაა მხარდაჭერილი! - + B-spline knot to endpoint tangency was applied instead. სამაგიეროდ გამოყენებულია B-სპლაინის კვანძიდან ბოლო წერტილის მხებამდე. - - + + Wrong number of selected objects! მონიშნული ობიექტების არასწორი რაოდენობა! - - + + With 3 objects, there must be 2 curves and 1 point. 3 ობიექტით უნდა იყოს 2 მრუდი და 1 წერტილი. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. აირჩიეთ ერთი ან მეტი რკალი ან წრეწირი ესკიზიდან. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. ესკიზიდან მონიშნეთ მხოლოდ ერთი ან მეტი B-სპლაინი, რკალები ან წრეწირები, მაგრამ ტიპებს ნუ შეურევთ. - - - + + + Constraint only applies to arcs or circles. შეზღუდვები ეხებამხოლოდ რკალებს და წრეწირებს. - - + + Select one or two lines from the sketch. Or select two edges and a point. ესკიზიდან მონიშნეთ ერთი ან ორი ხაზი ან მონიშნეთ ორი წიბო და წერტილი. @@ -3010,88 +3013,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c კუთხის შეზღუდვის დაყენება პარალელური ხაზებისთვის შეუძლებელია. - + Cannot add an angle constraint on an axis! ღერძზე კუთხის შეზღუდვის დაწესება შეუძლებელია! - + Select two edges from the sketch. მონიშეთ ორი წიბო ესკიზიდან. - + Select two or more compatible edges. მონიშნეთ ორი ან მეტი თავსებადი წიბო. - + Sketch axes cannot be used in equality constraints. ესკიზის ღერძები არ შეიძლება გამოყენებულ იქნას თანასწორობის შეზღუდვაში. - + Equality for B-spline edge currently unsupported. B-სპლაინის წიბოსთვის თანასწორობა ჯერ მხარდაუჭერელია. - - - + + + Select two or more edges of similar type. მონიშნეთ ორი ან მეტი ერთნაირი ტიპის წიბო. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. ესკიზზე მონიშნეთ ორი წერტილი და სიმეტრიის ხაზი, ან ორი წერტილი და სიმეტრიის წერტილი ან ხაზი და სიმეტრიის წერტილი. - - + + Cannot add a symmetry constraint between a line and its end points. არ შეიძლება სიმეტრიის შეზღუდვის დამატება ხაზსა და მის ბოლო წერტილებს შორის. - - + + Cannot add a symmetry constraint between a line and its end points! არ შეიძლება სიმეტრიის შეზღუდვის დამატება ხაზსა და მის ბოლო წერტილებს შორის! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw აირჩიეთ ხაზის ორი ბოლოწერტილები, რომლებსაც სხივის როლში შეუძლიათ გამოსვლა და წიბო, რომელიც ზღვარს წრმოადგენს. პირველი მონიშნული წერტილი შეესაბამება ინდექსს n1, მეორე n2 და მიბმის მნიშვნელობა შესატყვისობას n2/n1-ზე აყენებს. - + Selected objects are not just geometry from one sketch. მონიშნული ობიექტები არ წარმოადგენენ მხოლიდ გეომეტრიებს ერთი ესკიზიდან. - + Cannot create constraint with external geometry only. შეუძლებელია შეზღუდვის შექმნა მხოლოდ გარე გეომეტრიით. - + Incompatible geometry is selected. არჩეულია შეუთავსებელი გეომეტრია. + - - - - + + + Select constraints from the sketch. აირჩიეთ შეზღუდვები ესკიზიდან. @@ -3113,9 +3116,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c აღწერეთ B-სპლაინის კუთხე, 1-დან %1-მდე: - + CAD Kernel Error CAD-ის ბირთვის შეცდომა @@ -3191,69 +3194,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c არჩეული უნდა იყოს ორი ბოლო წერტილი ან დამთხვევის წერტილი. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. მონიშნეთ ელემენტები მხოლოდ ერთი ესკიზიდან. - + No constraint selected შეზღუდვა არჩეული არაა - + At least one constraint must be selected მონიშნული უნდა იყოს ერთი შეზღუდვა მაინც - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. სიმეტრიული კონსტრუქცია მოითხოვს სულ ცოტა 2 გეომეტრიულ ელემენტს, საიდანაც ერთი მაინც სიმეტრიის აშენების მიბმას წარმოადგენს. - + The last element must be a point or a line serving as reference for the symmetry construction. ბოლო ელემენტი უნდა იყოს წერტილი ან ხაზი, რომელიც სიმეტრიის აგების მიმართვად გამოიყენება. - - + + A copy requires at least one selected non-external geometric element ასლი მოითხოვს მინიმუმ ერთ მონიშნულ არაგარე გეომეტრიულ ელემენტს - + Delete All Geometry მთელი გეომეტრიის წაშლა - + Are you really sure you want to delete all geometry and constraints? ნამდვილად გნებავთ ყველა გეომეტრიის და შეზღუდვის წაშლა? - + Delete All Constraints ყველა შეზღუდვის წაშლა - + Are you really sure you want to delete all the constraints? ნამდვილად გნებავთ ყველა შეზღუდვის წაშლა? - + Removal of axes alignment requires at least one selected non-external geometric element სწორების ღერძის წაშლას სულ ერთი მონიშნული არა-გარე გეომეტრიული ელემენტი სჭირდება @@ -3332,7 +3335,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters - Scale parameters + მასშტაბის მორგება + + + + Translate parameters + Translate parameters @@ -3644,12 +3652,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c სიგრძე: - + Refractive index ratio გარდატეხვის მაჩვენებლების ფარდობა - + Ratio n2/n1: N2/n1 ფარდობა: @@ -4063,13 +4071,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - მასივის შექმნა + Create regular polygon + ჩვეულებრივი მრავალკუთხედის შექმნა - Number of Sides: - გვერდების რაოდენობა: + Number of sides: + Number of sides: @@ -4088,7 +4096,7 @@ reflected on copies Task panel widgets - Task panel widgets + ამოცანის პანელის ვიჯეტები @@ -4172,7 +4180,7 @@ Requires to re-enter edit mode to take effect. Dimension constraint - Dimension constraint + განზომილების შეზღუდვა @@ -4181,11 +4189,11 @@ Requires to re-enter edit mode to take effect. 'Separated tools': Individual tools for each dimensioning constraint. 'Both': You will have both the 'Dimension' tool and the separated tools. This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + აირჩიეთ თქვენი ხელსაწყოს პანელის განზომილების შეზღუდვის ტიპი: +'ერთი ხელსაწყო': ერთი ხელსაწყო ყველა განზომილების შეზღუდვისთვის ხელსაწყოთა ზოლში: დაშორება, დაშორება X / Y, კუთხე, რადიუსი (დანარჩენები იხილეთ ჩამოსაშლელ სიაში). +'ცალ-ცალკე ხელსაწყო': ცალ-ცალკე ხელსაწყო ყველა განზომილების შეზღუდვისთვის. +'ორივე': გექნებათ ორივე, 'განზომილების' ხელსაწყო და ცალ-ცალკე ხელსაწყოები. +ეს პარამეტრი მხოლოდ ხელსაწყოების პანელისთვისაა. რაც არ უნდა აირჩიოთ, ყველა ხელსაწყო, ასევე, ხელმისაწვდომია მენიუდან და მათი მალსახმობებით. @@ -4193,10 +4201,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + როცა განზომილების ხელსაწყოს იყენებთ, ასევე შეგიძლიათ, მიუთითოთ, როგორ დამუშავდება წრეწირები და რკალები: +'ავტომატური': ხელსაწყო გამოიყენებს რადიუსს რკალებისთვის და დიამეტრს წრეწირებისთვის. +'დიამეტრი': ხელსაწყო ორივე, რკალებისთვის და წრეწირებისთვის, დიამეტრს გამოიყენებს. +'რადიუსი': ხელსაწყო ორივე, რკალებისთვის და წრეწირებისთვის, რადიუსს გამოიყენებს. @@ -4206,7 +4214,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + ხედის-პარამეტრები: @@ -5073,112 +5081,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch ესკიზის ჩასწორება - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch ესკიზი დაზიანებულია - + Do you want to open the sketch validation tool? გნებავთ ესკიზის გადამოწმების ხელსაწყოს გახსნა? - + The sketch is invalid and cannot be edited. ესკიზი არასწორია. მისი ჩასწორება შეუძლებელია. - + Please remove the following constraint: გთხოვთ, წაშალოთ შემდეგი შეზღუდვა: - + Please remove at least one of the following constraints: გთხოვთ, ამოიღოთ მინიმუმ ერთი შემდეგი შეზღუდვა: - + Please remove the following redundant constraint: გთხოვთ, წაშალოთ შემდეგი დამატებითი შეზღუდვები: - + Please remove the following redundant constraints: გთხოვთ, წაშალოთ შემდეგი დამატებითი შეზღუდვები: - + The following constraint is partially redundant: ეს შეზღუდვა ნაწილობრივ დამატებითია: - + The following constraints are partially redundant: ეს შეზღუდვები ნაწილობრივ დამატებითია: - + Please remove the following malformed constraint: გთხოვთ, წაშალოთ შემდეგი არასწორად ფორმირებული შეზღუდვა: - + Please remove the following malformed constraints: გთხოვთ, წაშალოთ შემდეგი არასწორად ფორმირებული შეზღუდვები: - + Empty sketch ცარიელი ესკიზი - + Over-constrained: ზედმეტად-შეზღუდული: - + Malformed constraints: არასწორად შექმნილი შეზღუდვები: - + Redundant constraints: დამატებითი შეზღუდვები: - + Partially redundant: ნაწილობრივ დამატებითი: - + Solver failed to converge ამომხსნელის შეცდომა შეერთების დროს - + Under constrained: საკმარისზე ნაკლებად შეზღუდული: - + %n DoF(s) %n თხ @@ -5186,7 +5194,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained სრულად შეზღუდული @@ -5257,8 +5265,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point ქმნის გეომეტრიის ასლს, საბაზისოდ ბოლოს მონიშნული წერტილით @@ -5266,17 +5274,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone ასლი - + Copy კოპირება - + Move გადატანა @@ -5284,8 +5292,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc წრის ან რკალის რადიუსის გასწორება @@ -5293,8 +5301,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc წრის ან რკალის რადიუსის/დიამეტრის გასწორება @@ -5302,8 +5310,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc წრეწირის ან რკალის რადიუსის გამუდმივება @@ -5311,8 +5319,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point ქმნის გეომეტრიის მარტივ ასლს, საბაზისოდ ბოლოს მონიშნული წერტილით @@ -5598,8 +5606,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point გეომეტრიების გადატანა ორიენტირად ბოლოს მონიშნული წერტილის გამოყენებით @@ -5924,7 +5932,7 @@ Eigen Sparse QR ალგორითმი ოპტიმიზებული ViewProviderSketch - + and %1 more და %1 სხვა @@ -6154,64 +6162,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error შეცდომა - + Failed to delete all geometry ყველა გეომეტრიის წაშლის შეცდომა - + Failed to delete all constraints ყველა შეზღუდვის წაშლის შეცდომა - - + + Invalid selection არასწორი მონიშნული - + Selection has no valid geometries. მონიშნულს სწორი გეომეტრიები არ გააჩნია. - + Selection has no valid geometries. BSplines, Points are not supported yet. მონიშნულის გეომეტრიები არასწორია. B-სპლაინები და წერტილები ჯერ მხარდაჭერილი არაა. @@ -6221,18 +6230,18 @@ The grid spacing change if it becomes smaller than this number of pixel.შეზღუდვას ინდექსის ინფორმაცია არასწორია და ის მიუღებელია. - - - - - - - + + + + + + + Invalid Constraint არასწორი შეზღუდვა @@ -6272,8 +6281,8 @@ The grid spacing change if it becomes smaller than this number of pixel.B-სპლაინის პოლუსის შექმნის შეცდომა - + Error creating B-spline B-სპლაინის შექმნის შეცდომა @@ -6329,16 +6338,17 @@ The grid spacing change if it becomes smaller than this number of pixel.ხაზის დამატების შეცდომა - - - - - - - - + + + + + + + + + Tool execution aborted ხელსაწყოს შესრულება შეწყდა @@ -6373,9 +6383,9 @@ The grid spacing change if it becomes smaller than this number of pixel.წიბოს წაკვეთის შეცდომა + - Value Error მნიშვნელობის შეცდომა @@ -6427,7 +6437,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Failed to scale - Failed to scale + დამასშტაბების შეცდომა + + + + Failed to translate + Failed to translate @@ -6628,12 +6643,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius რადიუსის სეზღუდვა - + Fix the radius of a circle or an arc წრეწირის ან რკალის რადიუსის გამუდმივება @@ -6750,12 +6765,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry წანაცვლების გეომეტრია - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. მონიშნული გეომეტრიების წანაცვლება. დადებითი წანაცვლების სიგრძე წანაცვლებას გარეთ გამოიტანს, უარყოფითი კი - შიგნით. @@ -6775,7 +6790,7 @@ Left clicking on empty space will validate the current constraint. Right clickin This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + ეს ეხება მონაცემის შეზღუდვებს (მაგ: დაშორებას). თუ კლონს ჩართავთ, ხელსაწყო მონაცემებს დააკოპირებს. თუ არა, ის მისი ტოლობებით ჩანაცვლებას შეეცდება. @@ -6888,12 +6903,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident დამთხვევის შეზღუდვა - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses წერტილებს შორის დამთხვევის, ან წერტილის წიბოზე დამაგრების, ან წრეწირებს, რკალებსა და ოვალებს შორის კონცენტრულობის შეზღუდვის შექმნა @@ -6901,12 +6916,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform პოლარული გარდაქმნა - + Rotate selected geometries, making n copies, enable creation of circular patterns. მონიშნული გეომეტრიების შებრუნება, n ასლის შექმნა, წრიული შაბლონების შექმნის დაშვება. @@ -7015,12 +7030,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of normal edges. - Line pattern of normal edges. + ნორმალის წიბოების ხაზის ნიმუში. Width of normal edges. - Width of normal edges. + ნორმალის წიბოების სიგანე. @@ -7040,12 +7055,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of construction edges. - Line pattern of construction edges. + კონსტრუქციის წიბოების ხაზის ნიმუში. Width of construction edges. - Width of construction edges. + კონსტრუქციის წებოების სიგანე. @@ -7065,12 +7080,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + შიდა გასწორებული წიბოების ხაზის ნიმუში. Width of internal aligned edges. - Width of internal aligned edges. + შიდა გასწორებული წიბოების სიგანე. @@ -7085,12 +7100,12 @@ Left clicking on empty space will validate the current constraint. Right clickin Line pattern of external edges. - Line pattern of external edges. + გარე წიბოების ხაზის ნიმუში. Width of external edges. - Width of external edges. + გარე წიბოების სიგანე. @@ -7188,7 +7203,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + ასლები (+'U'/ -'J') @@ -7196,7 +7211,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + მხარეები (+'U'/ -'J') @@ -7204,7 +7219,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Keep original geometries (U) - Keep original geometries (U) + ორიგინალი გეომეტრიების შენარჩუნება (U) @@ -7212,64 +7227,106 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrain - Constrain + შეზღუდვა Constrain tools. - Constrain tools. + შეზღუდვის ხელსაწყოები. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + ესკიზში კ&ოპირება - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + მონიშნული გეომეტრიებისა და შეზღუდვების კოპირება ბუფერში CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + &ამოჭრა ესკიზში - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + მონიშნული გეომეტრიებისა და შეზღუდვების ამოჭრა ბუფერში CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + ესკიზში ჩ&ასმა - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + მონიშნული გეომეტრიებისა და შეზღუდვების ჩასმა ბუფერიდან CmdSketcherScale - + Scale transform - Scale transform + გარდაქმნის მასშტაბი - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + მონიშნული გეომეტრიების დამასშტაბება. ცენტრალური წერტილის არჩევის შემდეგ შეგიძლიათ შეიყვანოთ მასშტაბის ფაქტორი ან აირჩიეთ ორი მიმართვის წერტილი, შემდეგ კი მასშტაბის ფაქტორი = სიგრძე(პ2-ცენტრი) / სიგრძე (პ1-ცენტრი). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + შეზღუდვების დაკლონვა + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts index caae134070..62cdbb2088 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ko.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone 복제 - + Creates a clone of the geometry taking as reference the last selected point 마지막에 선택한 점을 기준으로 geometry 복제합니다. @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle 호 또는 원 구속 - + Constrain an arc or a circle 호 또는 원을 구속함 - + Constrain radius 제약조건: 반지름 - + Constrain diameter 직경 구속 - + Constrain auto radius/diameter 자동 반지름/직경 구속 @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone 복제 - + Creates a clone of the geometry taking as reference the last selected point 마지막에 선택한 점을 기준으로 geometry 복제합니다. @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle 제약조건: 각도 - + Fix the angle of a line or the angle between two lines 단일 선의 각도(수평축 기준) 또는 두선 사이의 각도 고정 @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident 제약조건: 점 일치 - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses 점들 사이의 일치 구속 또는 원, 호, 타원 사이의 동심 구속을 생성함 @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter 직경 구속 - + Fix the diameter of a circle or an arc 원이나 호의 지름을 수정합니다 @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance 제약조건: 거리 - + Fix a length of a line or the distance between a line and a vertex or between two circles 선의 길이 또는 선과 꼭짓점 사이 또는 두 원 사이의 거리를 고정함 @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance 수평 거리를 구속합니다 - + Fix the horizontal distance between two points or line ends 두 점 또는 선의 수평거리 고정 @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance 수직 거리 구속 - + Fix the vertical distance between two points or line ends 두 점 또는 선의 수직거리 고정 @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal 제약조건: 동일 - + Create an equality constraint between two lines or between circles and arcs 두 선 또는 원과 원/호와 호/원과 호에 동일한 치수 부가 @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel 제약조건: 평행 - + Create a parallel constraint between two lines 선택한 요소(두 선)를 평행하게 고정 @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular 제약조건: 수직 - + Create a perpendicular constraint between two lines 선택한 요소(두 선)를 수직하게 고정 @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object 제약조건: 점을 선에 일치 - + Fix a point onto an object 점을 선에 일치 @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter 자동 반지름/직경 구속 - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen 원을 선택한 경우 지름을, 호/스플라인 폴을 선택한 경우 반지름을 수정합니다. @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. 광선의 두 끝점과 모서리 사이에 굴절 법칙(스넬의 법칙) 구속을 인터페이스interface로 생성합니다. @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical 제약조건: 대칭 - + Create a symmetry constraint between two points with respect to a line or a third point 선 또는 세 번째 점을 기준으로 두 점 사이에 대칭 구속조건을 생성합니다. @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent 제약조건: 탄젠트 - + Create a tangent constraint between two entities 두 엔티티가 서로 접하도록 고정 @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy 복사하기 - + Creates a simple copy of the geometry taking as reference the last selected point 마지막에 선택한 점을 기준으로 geometry 복사합니다. @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints 모든 제약 제거 - + Delete all constraints in the sketch 스케치의 모든 제약 제거 @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry 모든 형상 제거 - + Delete all geometry and constraints in the current sketch, with the exception of external geometry 현재 스케치에서 외부 형상을 제외한 모든 형상과 제약 제거하기 @@ -1228,12 +1228,12 @@ as mirroring reference. CmdSketcherMove - + Move 이동 - + Moves the geometry taking as reference the last selected point 마지막으로 선택한 점을 기준으로 도형을 이동합니다. @@ -1254,12 +1254,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array 직사각형 배열 - + Creates a rectangular array pattern of the geometry taking as reference the last selected point 마지막으로 선택한 점을 기준으로 도형의 직사각형 배열 패턴을 생성합니다. @@ -1267,12 +1267,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment 축 정렬을 제거합니다. - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection 선택의 구속 관계를 유지하면서 축 정렬을 제거하도록 구속을 수정합니다. @@ -1295,12 +1295,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry 내부 geometry 보기/숨기기 - + Show all internal geometry or hide unused internal geometry 모든 내부 도형을 보거나 또는 사용하지 않는 내부 도형을 숨깁니다. @@ -1308,8 +1308,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints 충돌하는 구속을 선택합니다. @@ -1317,12 +1317,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints 관련 구속을 선택합니다. - + Select the constraints associated with the selected geometrical elements 선택한 기하학적 요소와 관련된 구속을 선택합니다. @@ -1330,12 +1330,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry 관련된 도형을 선택합니다. - + Select the geometrical elements associated with the selected constraints 선택한 구속과 관련된 기하학적 요소를 선택합니다. @@ -1343,12 +1343,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF 구속되지 않은 자유도DoF를 선택합니다 - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. 솔버solver가 여전히 구속되지 않은 자유도DoF를 감지한 곳의 기하학적 요소를 선택합니다. @@ -1356,12 +1356,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis 수평 축을 선택합니다. - + Select the local horizontal axis of the sketch 스케치의 수평 축을 선택합니다. @@ -1369,8 +1369,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints 잘못된 구속을 선택합니다. @@ -1378,12 +1378,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin 원점을 선택합니다. - + Select the local origin point of the sketch 스케치의 지역 원점을 선택합니다. @@ -1391,8 +1391,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints 부분적으로 중복되는 구속을 선택합니다. @@ -1400,8 +1400,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints 중복되는 구속을 선택합니다. @@ -1409,12 +1409,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis 수직 축을 선택합니다. - + Select the local vertical axis of the sketch 스케치의 지역 수직 축을 선택합니다. @@ -1461,12 +1461,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry 대칭 - + Creates symmetric geometry with respect to the last selected line or point 마지막으로 선택된 선이나 점을 기준으로 대칭 geometry를 생성합니다. @@ -1474,12 +1474,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint 구속을 활성화/비활성화합니다. - + Activates or deactivates the selected constraints 선택한 구속을 활성화하거나 비활성화합니다. @@ -1500,12 +1500,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint 구동driving/참조reference 구속을 전환합니다. - + Set the toolbar, or the selected constraints, into driving or reference mode 도구 모음 또는 선택한 제약 조건을 주행 또는 참조 모드로 설정합니다 @@ -1592,54 +1592,54 @@ invalid constraints, degenerated geometry, etc. 고정fixed 구속을 추가합니다 - + Add 'Block' constraint 'Block' 구속을 추가합니다 - + Add block constraint Block 구속을 추가합니다 - - + + Add coincident constraint 일치 구속을 추가합니다 - - + + Add distance from horizontal axis constraint 수평축 구속에서 거리 추가하기 - - + + Add distance from vertical axis constraint 수직축 구속에서 거리 추가하기 - - + + Add point to point distance constraint 점에서 점까지 거리 구속 추가하기 - - + + Add point to line Distance constraint 점에서 선까지 거리 구속 추가하기 - - + + Add circle to circle distance constraint 원에서 원까지 거리 구속 추가하기 - + Add circle to line distance constraint 원에서 선까지 거리 구속 추가하기 @@ -1648,8 +1648,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint 길이 구속 추가하기 @@ -1771,159 +1771,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint 점에서 개체까지 구속 추가하기 - - + + Add point to point horizontal distance constraint 점에서 점까지 수평 거리 구속 추가하기 - + Add fixed x-coordinate constraint 고정 x-좌표 구속 추가하기 - - + + Add point to point vertical distance constraint 점에서 점까지 수직 거리 구속 추가하기 - + Add fixed y-coordinate constraint 고정 y-좌표 구속 추가하기 - - + + Add parallel constraint 평행 구속 추가하기 - - - - - - - + + + + + + + Add perpendicular constraint 수직 구속 추가하기 - + Add perpendicularity constraint 수직도 구속 추가하기 - + Swap coincident+tangency with ptp tangency 일치+접선을 ptp 접선으로 바꾸기 - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint 접선 구속 추가하기 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point 접선구속 점 추가하기 - - - - + + + + Add radius constraint 반경 구속 추가하기 - - - - + + + + Add diameter constraint 직경 구속 추가하기 - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint 각도 구속 추가하기 - - + + Add equality constraint 동일 구속 추가하기 - - - - - + + + + + Add symmetric constraint 대칭 구속 추가하기 - + Add Snell's law constraint 스넬의 법칙 구속 추가하기 - + Toggle constraint to driving/reference 구동/참조 구속을 전환하기 - + Activate/Deactivate constraint 구속을 활성화/비활성화하기 @@ -2094,47 +2094,47 @@ invalid constraints, degenerated geometry, etc. 곡선 결합하기 - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry 내부 형상 노출 - + Create symmetric geometry 대칭 형상 생성하기 - + Copy/clone/move geometry 형상 복사/복제/이동하기 - + Create copy of geometry 형상의 복사본 생성하기 - + Delete all geometry 모든 형상 제거 - + Delete All Constraints Delete All Constraints - + Remove Axes Alignment 축 정렬 제거하기 @@ -2152,8 +2152,8 @@ invalid constraints, degenerated geometry, etc. 구속의 가상 공간을 업데이트하기 - + Add auto constraints 자동 구속 추가하기 @@ -2168,22 +2168,22 @@ invalid constraints, degenerated geometry, etc. 스케치 구속 이름 바꾸기 - + Drag Point 점 끌기 - + Drag Curve 곡선 끌기 - + Drag Constraint 구속 끌기 - + Modify sketch constraints 스케치 구속 수정하기 @@ -2222,6 +2222,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2326,16 +2331,16 @@ invalid constraints, degenerated geometry, etc. 매듭은 B스플라인 매개변수 범위 밖에서 삽입할 수 없습니다. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2401,20 +2406,8 @@ invalid constraints, degenerated geometry, etc. 첨부하지 마세요. - - - - - - - - - - - - @@ -2425,133 +2418,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection 잘못 된 선택 @@ -2626,8 +2630,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint 이중 제약조건 @@ -2643,8 +2647,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! The selected edge already has a Block constraint! @@ -2656,7 +2660,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. 두개 이상의 점을 선택하세요. @@ -2681,29 +2685,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Select one edge from the sketch. - + Select only edges from the sketch. Select only edges from the sketch. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error 에러 @@ -2718,75 +2722,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Endpoint to endpoint tangency was applied instead. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. 한 직선 또는 한 점, 한 직선 또는 두 점을 선택하세요. - + Cannot add a length constraint on an axis! 축에는 길이 제약조건을 적용할 수 없습니다! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. 적절한 것을 선택하세요. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2796,93 +2800,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 선택된 점들은 동일한 element에 속해 있거나 외부 geometry이므로 해당 곡선에 제약조건이 적용되지 않았습니다. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. 한 직선 또는 최대 2개의 점을 선택하세요. - + Cannot add a horizontal length constraint on an axis! 축에는 수평 길이 제약조건을 적용할 수 없습니다! - + Cannot add a fixed x-coordinate constraint on the origin point! Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! 축에는 수직 길이 제약조건을 적용할 수 없습니다! - + Cannot add a fixed y-coordinate constraint on the origin point! Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. 두개 이상의 직선을 선택하세요. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. 최소한 두개 이상의 직선을 선택하세요. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2892,35 +2895,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 사용가능한 조합: 두개의 곡선, 끝점과 곡선, 두개의 끝점, 두개의 곡선과 한 점. - + Select some geometry from the sketch. perpendicular constraint 스케치에서 geometry를 선택하세요. - - + + Cannot add a perpendicularity constraint at an unconnected point! 연결되지 않은 점에 대하여 수직 제약조건을 적용할 수 없습니다! - - + + One of the selected edges should be a line. 선택된 선중 하나는 직선이어야 합니다. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2930,67 +2933,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 사용가능한 조합: 두개의 곡선, 끝점과 곡선, 두개의 끝점, 두개의 곡선과 한 점. - + Select some geometry from the sketch. tangent constraint 스케치에서 geometry를 선택하세요. - - - + + + Cannot add a tangency constraint at an unconnected point! 연결되지 않은 점에 대하여 탄젠트 제약조건을 적용할 수 없습니다! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! 선택한 객체의 갯수가 잘못되었습니다! - - + + With 3 objects, there must be 2 curves and 1 point. 3개의 객체(2개의 곡선과 1개의 점)가 있어야합니다. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. 하나 이상의 호나 원을 선택하세요. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. 호 또는 원에만 적용 가능한 제약조건입니다. - - + + Select one or two lines from the sketch. Or select two edges and a point. 하나 이상의 직선을 선택하세요. 또는, 두개의 선과 하나의 점을 선택하세요. @@ -3005,88 +3008,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 각도 제약조건은 평행한 두 직선에는 적용할 수 없습니다. - + Cannot add an angle constraint on an axis! 축에는 각도 제약조건을 적용할 수 없습니다! - + Select two edges from the sketch. 두개의 선을 선택하세요. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Equality for B-spline edge currently unsupported. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 1)두 점과 대칭선 2)두 점과 대칭 점 또는 3)하나의 선과 대칭 점을 선택하세요. - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! 선과 선에 포함된 점에는 대칭 제약조건을 적용할 수 없습니다! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. 선택된 객체는 스케치의 geometry가 아닙니다. - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3108,9 +3111,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD 커널 에러 @@ -3186,69 +3189,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. 하나의 스케치에서 요소를 선택하세요. - + No constraint selected 선택된 제약조건이 없습니다. - + At least one constraint must be selected 최소한 하나 이상의 제약조건을 선택하세요. - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. 대칭은 최소한 두 개의 geometric 요소가 필요하며, 마지막 geometric 요소는 대칭의 기준이 됩니다. - + The last element must be a point or a line serving as reference for the symmetry construction. 대칭의 기준이 되는 마지막 요소는 반드시 점이나 선이어야 합니다. - - + + A copy requires at least one selected non-external geometric element 복사는 최소한 하나의 선택된 외부 geometric 요소가 필요합니다. - + Delete All Geometry Delete All Geometry - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Delete All Constraints - + Are you really sure you want to delete all the constraints? Are you really sure you want to delete all the constraints? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3329,6 +3332,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3639,12 +3647,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 길이: - + Refractive index ratio Refractive index ratio - + Ratio n2/n1: Ratio n2/n1: @@ -4060,13 +4068,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - 배열 생성 + Create regular polygon + 생성: 다각형 - Number of Sides: - Number of Sides: + Number of sides: + Number of sides: @@ -5070,119 +5078,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch 스케치 수정 - + A dialog is already open in the task panel 테스크 패널에 이미 다이얼로그가 열려있습니다. - + Do you want to close this dialog? 다이얼로그를 닫으시겠습니까? - + Invalid sketch 유효하지 않은 스케치 - + Do you want to open the sketch validation tool? 스케치 확인 도구를 여시겠습니까? - + The sketch is invalid and cannot be edited. 스키체가 유효하지 않으므로 수정할 수 없습니다. - + Please remove the following constraint: 다음 제약조건을 제거하세요. - + Please remove at least one of the following constraints: 다음 제약조건중 하나 이상을 제거하세요. - + Please remove the following redundant constraint: 중복 제약조건을 제거하세요: - + Please remove the following redundant constraints: 중복 제약조건을 제거하세요: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch 빈 스케치 - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) - + Fully constrained Fully constrained @@ -5253,8 +5261,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point 마지막에 선택한 점을 기준으로 geometry 복제합니다. @@ -5262,17 +5270,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone 복제 - + Copy 복사하기 - + Move 이동 @@ -5280,8 +5288,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 원이나 호의 지름을 수정합니다 @@ -5289,8 +5297,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5298,8 +5306,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 원 또는 호의 반지름을 고정 @@ -5307,8 +5315,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point 마지막에 선택한 점을 기준으로 geometry 복사합니다. @@ -5594,8 +5602,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point 마지막으로 선택한 점을 기준으로 도형을 이동합니다. @@ -5920,7 +5928,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6150,64 +6158,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error 에러 - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection 잘못된 선택 - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6217,18 +6226,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6268,8 +6277,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6325,16 +6334,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6369,9 +6379,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6425,6 +6435,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6624,12 +6639,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius 제약조건: 반지름 - + Fix the radius of a circle or an arc 원 또는 호의 반지름을 고정 @@ -6746,12 +6761,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6884,12 +6899,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident 제약조건: 점 일치 - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6897,12 +6912,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7219,12 +7234,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7232,12 +7247,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7245,12 +7260,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7258,14 +7273,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index b1bbe63add..97d1d7aaff 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Kopieer - + Creates a clone of the geometry taking as reference the last selected point Maakt een kloon van de geometrie en neemt als referentie het laatst geselecteerde punt @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Beperk de boog of de cirkel - + Constrain an arc or a circle Beperk een boog of een cirkel - + Constrain radius Beperk de straal - + Constrain diameter Beperk de diameter - + Constrain auto radius/diameter Beperk automatisch de straal/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Kopieer - + Creates a clone of the geometry taking as reference the last selected point Maakt een kloon van de geometrie en neemt als referentie het laatst geselecteerde punt @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Beperk hoek - + Fix the angle of a line or the angle between two lines Zet de hoek van een lijn of de hoek tussen twee lijnen vast @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Samenvallende beperking - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Maak een samenvallende beperking tussen punten, of een concentrische beperking tussen cirkels, bogen en ellipsen @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Beperk de diameter - + Fix the diameter of a circle or an arc Zet de diameter van een cirkel of een boog vast @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Afstand beperking - + Fix a length of a line or the distance between a line and a vertex or between two circles Zet de lengte van een lijn vast of de afstand tussen een lijn en een hoekpunt of tussen twee cirkels @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Beperk horizontale afstand - + Fix the horizontal distance between two points or line ends De horizontale afstand tussen twee punten of lijneinden vastzetten @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Beperk verticale afstand - + Fix the vertical distance between two points or line ends De verticale afstand tussen twee punten of lijneinden vastzetten @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Gelijke beperken - + Create an equality constraint between two lines or between circles and arcs Maak een Gelijkheidsbeperking tussen twee lijnen of tussen cirkels en bogen @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Parallelle-beperking - + Create a parallel constraint between two lines Maak een parallelle beperking tussen twee lijnen @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Beperk loodrecht - + Create a perpendicular constraint between two lines Maak een loodrechte beperking tussen twee lijnen @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Zet punt vast op object - + Fix a point onto an object Een punt op een object vastleggen @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Beperk automatisch de straal/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Zet de diameter vast als en cirkel is geselecteerd, of de straal als een boog/spline pool is geselecteerd @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Bepaal de refractie (Wet van Snellius) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Maak een beperking volgens de brekingswet (wet van Snellius) tussen twee eindpunten van lichtstralen en een rand als interface. @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Symmetrische-beperken - + Create a symmetry constraint between two points with respect to a line or a third point Maak een symmetrie beperking tussen twee punten @@ -600,12 +600,12 @@ met betrekking tot een lijn of een derde punt CmdSketcherConstrainTangent - + Constrain tangent Tangent beperken - + Create a tangent constraint between two entities Tangentiële beperkingen tussen twee entiteiten maken @@ -639,12 +639,12 @@ met betrekking tot een lijn of een derde punt CmdSketcherCopy - + Copy Kopie - + Creates a simple copy of the geometry taking as reference the last selected point Maakt een eenvoudige kopie van de geometrie met als referentie het laatst geselecteerde punt @@ -1029,12 +1029,12 @@ met betrekking tot een lijn of een derde punt CmdSketcherDeleteAllConstraints - + Delete all constraints Verwijder alle beperkingen - + Delete all constraints in the sketch Verwijder alle beperkingen in de schets @@ -1042,12 +1042,12 @@ met betrekking tot een lijn of een derde punt CmdSketcherDeleteAllGeometry - + Delete all geometry Alle geometrie verwijderen - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Verwijder alle geometrie en beperkingen in de huidige schets, met uitzondering van externe geometrie @@ -1231,12 +1231,12 @@ als spiegelverwijzing. CmdSketcherMove - + Move Verplaatsen - + Moves the geometry taking as reference the last selected point Verplaatst de geometrie met als referentie het laatst gekozen punt @@ -1257,12 +1257,12 @@ als spiegelverwijzing. CmdSketcherRectangularArray - + Rectangular array Rechthoekige reeks - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Maakt een rechthoekig reekspatroon van de geometrie met als referentie het laatst geselecteerde punt @@ -1270,12 +1270,12 @@ als spiegelverwijzing. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Uitlijning assen verwijderen - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Wijzigt de kaders om assen uitlijning te verwijderen terwijl u probeert de beperkende relatie van de selectie te behouden @@ -1298,12 +1298,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Toon/Verberg interne geometrie - + Show all internal geometry or hide unused internal geometry Toon alle interne geometrie of verberg ongebruikte interne geometrie @@ -1311,8 +1311,8 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Selecteer conflicterende beperkingen @@ -1320,12 +1320,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectConstraints - + Select associated constraints Selecteer bijbehorende beperkingen - + Select the constraints associated with the selected geometrical elements Selecteer de beperkingen die zijn gekoppeld aan de geselecteerde geometrische elementen @@ -1333,12 +1333,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Selecteer bijbehorende geometrie - + Select the geometrical elements associated with the selected constraints Selecteer de geometrische elementen die zijn gekoppeld aan de geselecteerde beperkingen @@ -1346,12 +1346,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Selecteer onbegrensde DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Selecteer geometrische elementen waar de oplosser nog steeds ongehinderde graden van vrijheid detecteert. @@ -1359,12 +1359,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Selecteer horizontale as - + Select the local horizontal axis of the sketch Selecteer de lokale horizontale as van de schets @@ -1372,8 +1372,8 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Selecteer foutieve randvoorwaarde @@ -1381,12 +1381,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectOrigin - + Select origin Selecteer oorsprong - + Select the local origin point of the sketch Selecteer het lokale oorsprongpunt van de schets @@ -1394,8 +1394,8 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Schets bevat overbodige beperkingen @@ -1403,8 +1403,8 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Selecteer overbodige beperkingen @@ -1412,12 +1412,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSelectVerticalAxis - + Select vertical axis Selecteer verticale as - + Select the local vertical axis of the sketch Selecteer de lokale verticale as van de schets @@ -1464,12 +1464,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherSymmetry - + Symmetry Symmetrie - + Creates symmetric geometry with respect to the last selected line or point Maakt een symmetrische geometrie ten opzichte van de laatst gekozen lijn of punt @@ -1477,12 +1477,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Beperking activeren/deactiveren - + Activates or deactivates the selected constraints Activeert of deactiveert de geselecteerde beperkingen @@ -1503,12 +1503,12 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Schakelt sturende/referentie beperking aan of uit - + Set the toolbar, or the selected constraints, into driving or reference mode Stel de werkbalk of de geselecteerde beperkingen in @@ -1597,54 +1597,54 @@ ongeldige constraints, gedegenereerde geometrie, etc. Gefixeerde beperking toevoegen - + Add 'Block' constraint Voeg een 'Fixerende' beperking toe - + Add block constraint Voeg een fixerende beperking toe - - + + Add coincident constraint Voeg samenvallende beperking toe - - + + Add distance from horizontal axis constraint Voeg afstand toe van horizontale as beperking - - + + Add distance from vertical axis constraint Voeg afstand toe van verticale as beperking - - + + Add point to point distance constraint Voeg punt toe aan punt afstand beperking - - + + Add point to line Distance constraint Voeg punt toe aan lijnafstand beperking - - + + Add circle to circle distance constraint Voeg cirkel toe aan cirkel afstand beperking - + Add circle to line distance constraint Voeg cirkel toe aan lijnafstand beperking @@ -1653,8 +1653,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - + + Add length constraint Beperking lengte toevoegen @@ -1776,159 +1776,159 @@ ongeldige constraints, gedegenereerde geometrie, etc. Voeg een afstandsbeperking in y-richting toe - + Add point to circle Distance constraint Voeg een punt-tot-cirkel afstandsbeperking toe - - + + Add point on object constraint Voeg punt toe aan object beperking - - + + Add point to point horizontal distance constraint Voeg punt toe aan punt horizontale afstand beperking - + Add fixed x-coordinate constraint Gefixeerde x-coördinaat beperking toevoegen - - + + Add point to point vertical distance constraint Voeg punt toe aan punt verticale afstand beperking - + Add fixed y-coordinate constraint Gefixeerde y-coördinaat beperking toevoegen - - + + Add parallel constraint Parallelle beperking toevoegen - - - - - - - + + + + + + + Add perpendicular constraint Haakse beperking toevoegen - + Add perpendicularity constraint Voeg haakse beperking toe - + Swap coincident+tangency with ptp tangency Wissel samenvallende+tangent met ptp tangens - + Swap PointOnObject+tangency with point to curve tangency Wissel PointOnObject+raaklijn om met punt op raaklijn van kromme - - - - - - - + + + + + + + Add tangent constraint Voeg tangens beperkgin toe - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Voeg tangens beperking toe - - - - + + + + Add radius constraint Voeg straal beperking toe - - - - + + + + Add diameter constraint Voeg diameter beperking - - - - + + + + Add radiam constraint Voeg straal/diameter beperking toe - - - - + + + + Add angle constraint Hoek beperking toe - - + + Add equality constraint Voeg gelijkheidsbeperking toe - - - - - + + + + + Add symmetric constraint Symmetrische beperking toevoegen - + Add Snell's law constraint Snell's wet beperking toevoegen - + Toggle constraint to driving/reference Schakel Beperking als sturend of als referentie in-/uit - + Activate/Deactivate constraint Beperking activeren/deactiveren @@ -2099,47 +2099,47 @@ ongeldige constraints, gedegenereerde geometrie, etc. Krommen verbinden - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Intern Geometrie belichten - + Create symmetric geometry Symmetrische geometrie creëren - + Copy/clone/move geometry Kopie/kloon/beweeg geometrie - + Create copy of geometry Kopie van geometrie maken - + Delete all geometry Alle geometrie verwijderen - + Delete All Constraints Verwijder alle beperkingen - + Remove Axes Alignment Verwijder assen uitlijning @@ -2157,8 +2157,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. Update beperking's virtuele ruimte - + Add auto constraints Voeg automatische beperkingen toe @@ -2173,22 +2173,22 @@ ongeldige constraints, gedegenereerde geometrie, etc. Hernoem schets beperking - + Drag Point Sleeppunt - + Drag Curve Sleep Kromme - + Drag Constraint Sleep beperking - + Modify sketch constraints Wijzig schets beperkingen @@ -2227,6 +2227,11 @@ ongeldige constraints, gedegenereerde geometrie, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2331,16 +2336,16 @@ ongeldige constraints, gedegenereerde geometrie, etc. Knooppunt kan niet worden toegevoegd buiten de parameters van de B-spline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. Niet bijvoegen - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Verkeerde selectie @@ -2631,8 +2635,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - + + Double constraint Dubbele beperking @@ -2648,8 +2652,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - + + The selected edge already has a Block constraint! De geselecteerde rand heeft al een blok constraint! @@ -2661,7 +2665,7 @@ ongeldige constraints, gedegenereerde geometrie, etc. - + Select vertices from the sketch. Selecteer vertexen vanuit de schets. @@ -2686,29 +2690,29 @@ ongeldige constraints, gedegenereerde geometrie, etc. Een blokbeperking kan niet worden toegevoegd als de schets onopgelost is of er overbodige en tegenstrijdige beperkingen zijn. - + Select one edge from the sketch. Selecteer een rand uit de schets. - + Select only edges from the sketch. Selecteer enkel randen uit de schets. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Het aantal geselecteerde objecten is niet gelijk aan 3 + - Error Fout @@ -2723,75 +2727,75 @@ ongeldige constraints, gedegenereerde geometrie, etc. De geselecteerde item(s) kunnen geen horizontale of verticale beperking accepteren! - + Endpoint to endpoint tangency was applied instead. Eindpunt tot eindpunttangens werd in plaats daarvan toegepast. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Selecteer twee of meer hoekpunten van de schets voor een samenvallende beperking, of twee of meer cirkels, ellipsen, bogen of ellipsbogen voor een concentrische beperking. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Selecteer twee hoekpunten van de schets voor een samenvallende beperking, of twee cirkels, ellipsen, bogen of ellipsbogen voor een concentrische beperking. - + Select exactly one line or one point and one line or two points from the sketch. Selecteer precies één lijn, of een punt en een lijn, of twee punten, uit de schets. - + Cannot add a length constraint on an axis! Een lengtebeperking is niet mogelijk op een as! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Selecteer precies één lijn, of één punt en één lijn, of twee punten, of twee cirkels, van de schets. - + This constraint does not make sense for non-linear curves. Deze beperking heeft geen zin voor niet-lineaire krommen. - + Endpoint to edge tangency was applied instead. Eindpunt tot de rand raaklijn werd in plaats daarvan toegepast. - - - - - - + + + + + + Select the right things from the sketch. Selecteer de juiste elementen uit de schets. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Selecteer een rand die geen B-spline gewicht is. @@ -2801,93 +2805,92 @@ ongeldige constraints, gedegenereerde geometrie, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Geen van de geselecteerde punten zijn op de respectievelijke curves beperkt, omdat het delen van hetzelfde element zijn, omdat ze allebei externe geometrie zijn, of omdat ze niet voor de rand in aanmerking komen. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Geen van de geselecteerde punten werd beperkt tot de respectievelijke curven, ofwel omdat ze deel uitmaken van hetzelfde element, ofwel omdat ze beide externe geometrie zijn. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Selecteer precies één lijn, of maximaal twee punten, uit de schets. - + Cannot add a horizontal length constraint on an axis! Een horizontale lengtebeperking is niet mogelijk op een as! - + Cannot add a fixed x-coordinate constraint on the origin point! Kan geen gefixeerd x-coördinaat constraint plaatsen op het punt van oorsprong! - - + + This constraint only makes sense on a line segment or a pair of points. Deze beperking heeft alleen zin op een lijnsegment of een tweetal punten. - + Cannot add a vertical length constraint on an axis! Een verticale lengtebeperking is niet mogelijk op een as! - + Cannot add a fixed y-coordinate constraint on the origin point! Kan geen gefixeerd y-coördinaat constraint plaatsen op het punt van oorsprong! - + Select two or more lines from the sketch. Selecteer twee of meer lijnen van de schets. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Selecteer tenminste twee lijnen uit de schets. - - Select a valid line. - Selecteer een geldige lijn. - - - - + The selected edge is not a valid line. De geselecteerde rand is geen geldige lijn. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunten; twee curven en een punt. - + Select some geometry from the sketch. perpendicular constraint Selecteer wat geometrie uit schets. - - + + Cannot add a perpendicularity constraint at an unconnected point! Kan geen loodrechtheidsbeperking toevoegen op een niet-verbonden punt! - - + + One of the selected edges should be a line. Eén van de geselecteerde randen moet een lijn zijn. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Endpoint op endpointtangens werd toegepast. De toevallige beperking werd verwijderd. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Eindpunt tot rand raaklijn is toegepast. Het punt op de object beperking is verwijderd. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunten; twee curven en een punt. - + Select some geometry from the sketch. tangent constraint Selecteer wat geometrie uit schets. - - - + + + Cannot add a tangency constraint at an unconnected point! Een raakbeperking kan niet worden toegevoegd aan een los punt! - - + + Tangent constraint at B-spline knot is only supported with lines! Raaklijn beperking bij B-spline knoop wordt alleen ondersteund met lijnen! - + B-spline knot to endpoint tangency was applied instead. B-spline knoop tot eindpunt raaklijn werd in plaats hiervan toegepast. - - + + Wrong number of selected objects! Verkeerd aantal geselecteerde objecten! - - + + With 3 objects, there must be 2 curves and 1 point. Met 3 objecten moeten er 2 curven en 1 punt zijn. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Selecteer een of meer bogen of cirkels uit de schets. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Selecteer slechts één of meer B-Spline polen of slechts één of meer bogen of cirkels van de schaap, maar niet gemengd. - - - + + + Constraint only applies to arcs or circles. Beperkingen gelden alleen voor bogen en cirkels. - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecteer een of twee lijnen uit de schets. Of selecteer twee randen en een punt. @@ -3010,88 +3013,88 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Een hoekbeperking kan niet worden ingesteld voor twee parallelle lijnen. - + Cannot add an angle constraint on an axis! Een hoekbeperking op een as is niet mogelijk! - + Select two edges from the sketch. Selecteer twee randen van de schets. - + Select two or more compatible edges. Selecteer twee of meer passende randen. - + Sketch axes cannot be used in equality constraints. Schets assen kunnen niet worden gebruikt voor gelijkheid beperkingen. - + Equality for B-spline edge currently unsupported. Gelijkheid voor B-splinerand momenteel niet ondersteund. - - - + + + Select two or more edges of similar type. Selecteer twee of meer randen van een vergelijkbaar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecteer twee punten en een symmetrie-lijn, twee punten en een symmetrie-punt of een lijn en een symmetrie-punt uit de schets. - - + + Cannot add a symmetry constraint between a line and its end points. Kan geen symmetrie beperking toevoegen tussen een lijn en zijn eindpunten. - - + + Cannot add a symmetry constraint between a line and its end points! Kan geen symmetriebeperking tussen een lijn en zijn eindpunten toevoegen! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selecteer twee eindpunten van lijnen om te fungeren als stralen, en een rand die een grens vertegenwoordigt. Het eerste geselecteerde punt komt overeen met index n1, tweede tot n2, en datum waarde bepaalt de verhouding n2/n1. - + Selected objects are not just geometry from one sketch. Geselecteerde objecten zijn niet slechts geometrie uit één schets. - + Cannot create constraint with external geometry only. Kan geen beperking maken met alleen externe geometrie. - + Incompatible geometry is selected. Incompatibele geometrie is geselecteerd. + - - - - + + + Select constraints from the sketch. Selecteer beperking(en) uit de schets. @@ -3113,9 +3116,9 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Definieer de B-Spline graad, tussen 1 en %1: - + CAD Kernel Error CAD-kernelfout @@ -3191,69 +3194,69 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Twee eindpunten, of een samenvallend punt, moeten worden geselecteerd. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Selecteer elementen uit één schets. - + No constraint selected Geen beperking geselecteerd - + At least one constraint must be selected U dient minstens één beperking te selecteren - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Een symmetrische constructie vereist minstens twee geometrische elementen. Het laatste geometrische element is de referentie voor de symmetrieconstructie. - + The last element must be a point or a line serving as reference for the symmetry construction. Het laatste element moet een punt of een lijn zijn die als referentie dient voor de symmetrieopbouw. - - + + A copy requires at least one selected non-external geometric element Een kopie vereist minstens één geselecteerd niet-extern geometrisch element - + Delete All Geometry Verwijder alle geometrie - + Are you really sure you want to delete all geometry and constraints? Weet je zeker dat je alle geometrie en beperkingen wilt verwijderen? - + Delete All Constraints Verwijder alle beperkingen - + Are you really sure you want to delete all the constraints? Weet u zeker dat u alle beperkingen wilt verwijderen? - + Removal of axes alignment requires at least one selected non-external geometric element Verwijdering van de assen uitlijning vereist ten minste één geselecteerd niet-extern geometrisch element @@ -3334,6 +3337,11 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Lengte: - + Refractive index ratio Brekingsindexverhouding - + Ratio n2/n1: Verhouding n2/n1: @@ -4065,13 +4073,13 @@ wordt gereflecteerd op de kopieën SketcherGui::SketcherRegularPolygonDialog - Create array - Reeks maken + Create regular polygon + Regelmatige veelhoek maken - Number of Sides: - Aantal Zijden: + Number of sides: + Number of sides: @@ -5075,112 +5083,112 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. SketcherGui::ViewProviderSketch - + Edit sketch Schets bewerken - + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? - + Invalid sketch Ongeldige schets - + Do you want to open the sketch validation tool? Wilt u het schetsvalidatiegereedschap openen? - + The sketch is invalid and cannot be edited. De schets is ongeldig en kan niet worden bewerkt. - + Please remove the following constraint: Gelieve de volgende beperking te verwijderen: - + Please remove at least one of the following constraints: Gelieve minstens één van de volgende beperkingen te verwijderen: - + Please remove the following redundant constraint: Gelieve de volgende overbodige beperking te verwijderen: - + Please remove the following redundant constraints: Gelieve de volgende overbodige beperkingen te verwijderen: - + The following constraint is partially redundant: De volgende beperking is gedeeltelijk overbodig: - + The following constraints are partially redundant: De volgende beperkingen zijn gedeeltelijk overbodig: - + Please remove the following malformed constraint: Verwijder de volgende conflicterende beperking: - + Please remove the following malformed constraints: Verwijder de volgende conflicterende beperkingen: - + Empty sketch Lege schets - + Over-constrained: Over-bepaald: - + Malformed constraints: Ongeldige beperkingen: - + Redundant constraints: Overbodige beperkingen: - + Partially redundant: Gedeeltelijk overbodig: - + Solver failed to converge Solver kon niet convergeren - + Under constrained: On-bepaald: - + %n DoF(s) %n vrijheidsgra(a)d(en) @@ -5188,7 +5196,7 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. - + Fully constrained Volledig bepaald @@ -5259,8 +5267,8 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Maakt een kloon van de geometrie en neemt als referentie het laatst geselecteerde punt @@ -5268,17 +5276,17 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_CompCopy - + Clone Kopieer - + Copy Kopie - + Move Verplaatsen @@ -5286,8 +5294,8 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Zet de diameter van een cirkel of een boog vast @@ -5295,8 +5303,8 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Straal/diameter van een cirkel of boog bepalen @@ -5304,8 +5312,8 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc De straal van een cirkel of boog vastzetten @@ -5313,8 +5321,8 @@ Dit wordt gedaan door de geometrie en beperkingen van de schets te analyseren. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Maakt een eenvoudige kopie van de geometrie met als referentie het laatst geselecteerde punt @@ -5600,8 +5608,8 @@ Selecteer de methode om deze schets toe te voegen aan de geselecteerde objecten. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Verplaatst de geometrie met als referentie het laatst gekozen punt @@ -5926,7 +5934,7 @@ Eigen Sparse-QR-algoritme is geoptimaliseerd voor spaarzame matrices; meestal sn ViewProviderSketch - + and %1 more en %1 meer @@ -6156,64 +6164,65 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Fout - + Failed to delete all geometry Verwijderen van alle geometrie is mislukt - + Failed to delete all constraints Mislukt om alle beperkingen te verwijderen - - + + Invalid selection Foute selectie - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6223,18 +6232,18 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels.De beperking heeft ongeldige index informatie en is onjuist vormgegeven. - - - - - - - + + + + + + + Invalid Constraint Ongeldige beperking @@ -6274,8 +6283,8 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels.Fout bij het maken van de B-spline pool - + Error creating B-spline Fout bij het maken van de B-spline @@ -6331,16 +6340,17 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels.Kon lijn niet toevoegen - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6375,9 +6385,9 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels.Kon de rand niet inkorten + - Value Error Fout in de waarde @@ -6431,6 +6441,11 @@ De rasterafstand verandert als deze kleiner wordt dan dit aantal pixels.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6629,12 +6644,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherConstrainRadius - + Constrain radius Beperk de straal - + Fix the radius of a circle or an arc De straal van een cirkel of boog vastzetten @@ -6751,12 +6766,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6889,12 +6904,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherConstrainCoincidentUnified - + Constrain coincident Samenvallende beperking - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6902,12 +6917,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7224,12 +7239,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7237,12 +7252,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7250,12 +7265,12 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7263,14 +7278,56 @@ Afhankelijk van uw keuzes zijn er mogelijk meerdere beperkingen beschikbaar. U k CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 35cc5125c3..91879edd0e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klonuj - + Creates a clone of the geometry taking as reference the last selected point Tworzy prostą kopię geometrii przyjmującej jako odniesienie ostatni wybrany punkt @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Zwiąż łuk lub okrąg - + Constrain an arc or a circle Zwiąż łuk lub okrąg - + Constrain radius Wiązanie promienia - + Constrain diameter Wiązanie średnicy - + Constrain auto radius/diameter Zwiąż automatycznie promień / średnicę @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klonuj - + Creates a clone of the geometry taking as reference the last selected point Tworzy klon geometrii przyjmując za punkt odniesienia ostatni wybrany punkt @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Wiązanie kąta - + Fix the angle of a line or the angle between two lines Ustaw kąt linii lub kąt pomiędzy 2 liniami @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Wiązanie zbieżności - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Utwórz wiązanie zbieżności między punktami lub wiązanie współśrodkowe między okręgami, łukami i elipsami @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Wiązanie średnicy - + Fix the diameter of a circle or an arc Ustal średnicę okręgu lub łuku @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Wiązanie odległości - + Fix a length of a line or the distance between a line and a vertex or between two circles Ustal długość linii lub odległość między linią a wierzchołkiem lub między dwoma okręgami @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Zwiąż odległość poziomą - + Fix the horizontal distance between two points or line ends Ustal poziomą odległość między dwoma punktami lub końcami linii @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Zwiąż odległość pionową - + Fix the vertical distance between two points or line ends Ustal pionową odległość między dwoma punktami lub końcami linii @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Wiązanie równości - + Create an equality constraint between two lines or between circles and arcs Utwórz wiązanie równości między dwiema liniami lub między okręgami i łukami @@ -520,12 +520,12 @@ na wybranym wierzchołku CmdSketcherConstrainParallel - + Constrain parallel Wiązanie równoległości - + Create a parallel constraint between two lines Utwórz wiązanie równoległości pomiędzy dwoma liniami @@ -533,12 +533,12 @@ na wybranym wierzchołku CmdSketcherConstrainPerpendicular - + Constrain perpendicular Wiązanie prostopadłości - + Create a perpendicular constraint between two lines Utwórz wiązanie prostopadłości między dwoma liniami @@ -546,12 +546,12 @@ na wybranym wierzchołku CmdSketcherConstrainPointOnObject - + Constrain point onto object Zwiąż punkt na obiekcie - + Fix a point onto an object Ustaw punkt na obiekcie @@ -559,12 +559,12 @@ na wybranym wierzchołku CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Zwiąż automatycznie promień / średnicę - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Ustal średnicę, jeśli wybrano okrąg lub promień, jeśli wybrano łuk lub biegun liniowy @@ -572,12 +572,12 @@ na wybranym wierzchołku CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Wiązanie refrakcji (prawo Snell'a) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Tworzy wiązanie refrakcji (prawo Snella) pomiędzy dwoma punktami końcowymi promieni @@ -587,12 +587,12 @@ oraz krawędzią jako interfejsem. CmdSketcherConstrainSymmetric - + Constrain symmetrical Wiązanie symetrii - + Create a symmetry constraint between two points with respect to a line or a third point Utwórz wiązanie symetrii pomiędzy dwoma punktami @@ -602,12 +602,12 @@ w odniesieniu do linii lub trzeciego punktu CmdSketcherConstrainTangent - + Constrain tangent Wiązanie styczności - + Create a tangent constraint between two entities Utwórz wiązanie styczności pomiędzy dwoma obiektami @@ -641,12 +641,12 @@ w odniesieniu do linii lub trzeciego punktu CmdSketcherCopy - + Copy Kopiuj - + Creates a simple copy of the geometry taking as reference the last selected point Tworzy prostą kopię geometrii przyjmującej jako odniesienie ostatni wybrany punkt @@ -1031,12 +1031,12 @@ w odniesieniu do linii lub trzeciego punktu CmdSketcherDeleteAllConstraints - + Delete all constraints Usuń wszystkie wiązania - + Delete all constraints in the sketch Usuń wszystkie wiązania z rysunku @@ -1044,12 +1044,12 @@ w odniesieniu do linii lub trzeciego punktu CmdSketcherDeleteAllGeometry - + Delete all geometry Usuń wszystkie geometrie - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Usuń wszystkie geometrie i wiązania z bieżącego rysunku, z wyjątkiem geometrii zewnętrznej @@ -1111,7 +1111,7 @@ w odniesieniu do linii lub trzeciego punktu Increase knot multiplicity - Zwiększ liczebność węzłów + Zwiększ liczbę węzłów @@ -1233,12 +1233,12 @@ jako odniesienia lustrzanego odbicia. CmdSketcherMove - + Move Przesuń - + Moves the geometry taking as reference the last selected point Przenosi geometrię przyjmując jako odniesienie ostatni wybrany punkt @@ -1259,12 +1259,12 @@ jako odniesienia lustrzanego odbicia. CmdSketcherRectangularArray - + Rectangular array Szyk prostokątny - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Tworzy prostokątny wzór geometrii, przyjmując jako odniesienie ostatni wybrany punkt @@ -1272,12 +1272,12 @@ jako odniesienia lustrzanego odbicia. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Usuń wyrównanie osi - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modyfikuje wiązania, aby usunąć wyrównanie osi, próbując jednocześnie zachować zależność wiązań dla zaznaczenia @@ -1300,12 +1300,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Pokaż / ukryj geometrię wewnętrzną - + Show all internal geometry or hide unused internal geometry Pokaż całą geometrię wewnętrzną lub ukryj nieużywaną geometrię wewnętrzną @@ -1313,8 +1313,8 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Wybierz wiązania konfliktowe @@ -1322,12 +1322,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectConstraints - + Select associated constraints Wybierz powiązane więzy - + Select the constraints associated with the selected geometrical elements Zaznacz wiązania skojarzone z wybranymi elementami @@ -1335,12 +1335,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Wybierz powiązaną geometrię - + Select the geometrical elements associated with the selected constraints Zaznacz elementy geometryczne powiązane z wybranymi wiązaniami @@ -1348,12 +1348,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Wybierz elementy bez wiązań - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Zaznacz elementy geometryczne, w których solver nadal wykrywa niezwiązane stopnie swobody. @@ -1361,12 +1361,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Wybierz oś poziomą - + Select the local horizontal axis of the sketch Zaznacz lokalną oś poziomą szkicu @@ -1374,8 +1374,8 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Wybierz nieprawidłowo sformułowane wiązania @@ -1383,12 +1383,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectOrigin - + Select origin Wybierz odniesienie położenia - + Select the local origin point of the sketch Zaznacz lokalny punkt odniesienia położenia szkicu @@ -1396,8 +1396,8 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Wybierz częściowo zbędne wiązania @@ -1405,8 +1405,8 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Wybierz zbędne wiązania @@ -1414,12 +1414,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSelectVerticalAxis - + Select vertical axis Wybierz oś pionową - + Select the local vertical axis of the sketch Zaznacz lokalną oś pionową szkicu @@ -1466,12 +1466,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherSymmetry - + Symmetry Odbicie lustrzane - + Creates symmetric geometry with respect to the last selected line or point Tworzy symetryczną geometrię w odniesieniu do ostatniej wybranej linii lub punktu @@ -1479,12 +1479,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Aktywuj / dezaktywuj wiązanie - + Activates or deactivates the selected constraints Aktywuje lub wyłącza zaznaczone wiązania @@ -1505,12 +1505,12 @@ To usunie właściwość "podparcie", jeśli istnieje. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Przełącz kontrolę wiązania - + Set the toolbar, or the selected constraints, into driving or reference mode Ustaw pasek narzędzi lub wybrane więzy wymiarowe @@ -1599,54 +1599,54 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Dodaj wiązanie zablokowania - + Add 'Block' constraint Dodaj wiązanie zablokowania - + Add block constraint Dodaj wiązanie zablokowania - - + + Add coincident constraint Dodaj wiązanie zbieżności - - + + Add distance from horizontal axis constraint Dodaj odległość od wiązania osi poziomej - - + + Add distance from vertical axis constraint Dodaj odległość od wiązania osi pionowej - - + + Add point to point distance constraint Dodaj ograniczenie odległości punktu od punktu - - + + Add point to line Distance constraint Dodaj ograniczeni odległości punktu od linii - - + + Add circle to circle distance constraint Dodaj wiązanie odległości okręgu do okręgu - + Add circle to line distance constraint Dodaj wiązanie odległości okręgu do linii @@ -1655,8 +1655,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - + + Add length constraint Dodaj wiązanie długości @@ -1778,159 +1778,159 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Dodaj wiązanie odległości Y - + Add point to circle Distance constraint Dodaj wiązanie odległości punktu od okręgu - - + + Add point on object constraint Dodaj punkt w miejscu wiązania obiektu - - + + Add point to point horizontal distance constraint Dodaj poziome wiązanie odległości, pomiędzy punktami - + Add fixed x-coordinate constraint Dodaj wiązanie ze stałą współrzędną x - - + + Add point to point vertical distance constraint Dodaj pionowe wiązanie odległości pomiędzy punktami - + Add fixed y-coordinate constraint Dodaj wiązanie ze stałą współrzędną y - - + + Add parallel constraint Dodaj wiązanie równoległości - - - - - - - + + + + + + + Add perpendicular constraint Dodaj wiązanie prostopadłości - + Add perpendicularity constraint Dodaj wiązanie prostopadłości - + Swap coincident+tangency with ptp tangency Zamień styczność krawędzi na styczność od punktu do punktu - + Swap PointOnObject+tangency with point to curve tangency Zamień wiązanie Punkt na obiekcie+styczna z punktem na wiązanie Styczna do krzywej - - - - - - - + + + + + + + Add tangent constraint Dodaj wiązanie kąta - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Dodaj punkt dostępny dla wiązania styczności - - - - + + + + Add radius constraint Dodaj wiązanie promienia - - - - + + + + Add diameter constraint Dodaj wiązanie średnicy - - - - + + + + Add radiam constraint Dodaj wiązanie promienia - - - - + + + + Add angle constraint Dodaj wiązanie kąta - - + + Add equality constraint Dodaj wiązanie równości - - - - - + + + + + Add symmetric constraint Dodaj wiązanie symetryczności - + Add Snell's law constraint Dodaj wiązanie prawa Snella - + Toggle constraint to driving/reference Przełączanie wiązania między kontrolującym i odniesienia - + Activate/Deactivate constraint Aktywuj / dezaktywuj wiązanie @@ -2083,7 +2083,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Increase knot multiplicity - Zwiększ liczbę węzłów + Zwiększ liczebność węzłów @@ -2101,47 +2101,47 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Połącz krzywe - + Cut in Sketcher - Cut in Sketcher + Wytnij w szkicu - + Paste in Sketcher - Paste in Sketcher + Wklej do szkicu - + Exposing Internal Geometry Prezentuj geometrię wewnętrzną - + Create symmetric geometry Utwórz geometrię symetryczną - + Copy/clone/move geometry Kopiuj / klonu j/ przesuń geometrię - + Create copy of geometry Utwórz kopię geometrii - + Delete all geometry Usuń wszystkie geometrie - + Delete All Constraints Usuń wszystkie wiązania - + Remove Axes Alignment Usuń wyrównanie osi @@ -2159,8 +2159,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Aktualizuj wiązania przestrzeni wirtualnej - + Add auto constraints Dodaj wiązania automatycznie @@ -2175,22 +2175,22 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Zmień nazwę wiązania szkicu - + Drag Point Przeciągnij punkt - + Drag Curve Przeciągnij krzywą - + Drag Constraint Przeciągnij wiązanie - + Modify sketch constraints Modyfikuj wiązania szkicu @@ -2227,7 +2227,12 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Scale geometries - Scale geometries + Skaluj geometrie + + + + Translate geometries + Translate geometries @@ -2333,16 +2338,16 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Węzła nie można wstawić poza zakresem parametrów krzywej złożonej. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Indeks parametru ToolWidget poza zakresem @@ -2408,20 +2413,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Nie dołączaj - - - - - - - - - - - - @@ -2432,135 +2425,146 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection - Niewłaściwy wybór + Nieprawidłowy wybór @@ -2633,8 +2637,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - + + Double constraint Zdublowane wiązanie @@ -2650,8 +2654,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - + + The selected edge already has a Block constraint! Wybrana krawędź ma już wiązanie zablokowania! @@ -2663,7 +2667,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - + Select vertices from the sketch. Wybierz wierzchołki ze szkicu. @@ -2688,29 +2692,29 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Nie można dodać wiązania zablokowania, jeśli rysunek nie został rozwiązany lub istnieją wiązania zbędne i/lub sprzeczne. - + Select one edge from the sketch. Zaznacz jedną krawędź ze szkicu. - + Select only edges from the sketch. Zaznacz tylko krawędzie ze szkicu. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + W przypadku krzywej złożonej obsługiwana jest tylko styczna przez punkt. - + Number of selected objects is not 3 Liczba wybranych obiektów nie jest równa 3 + - Error Błąd @@ -2725,95 +2729,95 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Wybrane elementy nie mogą zaakceptować wiązania poziomego lub pionowego! - + Endpoint to endpoint tangency was applied instead. Zamiast tego zastosowano styczne między punktami końcowymi. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Wybierz dwa lub więcej wierzchołków ze szkicu dla wiązania zbieżności albo co najmniej dwa koła, elipsy, łuki lub łuki eliptyczne do wiązania współśrodkowego. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Wybierz dwa wierzchołki ze szkicu dla wiązania zbieżności albo dwa koła, elipsy, łuki lub łuki eliptyczne do wiązania współśrodkowego. - + Select exactly one line or one point and one line or two points from the sketch. Wybierz dokładnie jedną linię lub jeden punkt i jedną linię lub dwa punkty ze szkicu. - + Cannot add a length constraint on an axis! Nie można dodać ograniczenia długości osi! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Wybierz ze szkicu dokładnie jedną linię lub jeden punkt i jedną linię lub dwa punkty lub dwa okręgi. - + This constraint does not make sense for non-linear curves. Takie wiązanie nie ma sensu w przypadku krzywych nieliniowych. - + Endpoint to edge tangency was applied instead. Zamiast tego zastosowano styczność punktu końcowego do krawędzi. - - - - - - + + + + + + Select the right things from the sketch. Wybierz prawidłowe obiekty ze szkicu. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Wybierz krawędź, która nie jest wagą krzywej złożonej. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. + Usunięto jeden lub dwa wiązania punktu na obiekcie, ponieważ ostatnie wiązanie zastosowane wewnętrznie dotyczy również punktu na obiekcie. - + Select either several points, or several conics for concentricity. Aby uzyskać wiązanie współśrodkowe, wybierz kilka punktów lub kilka stożków. - + Select either one point and several curves, or one curve and several points Wybierz jeden punkt i kilka krzywych lub jedną krzywą i kilka punktów - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Wybierz jeden punkt i kilka krzywych lub jedną krzywą i kilka punktów dla wiązania typu "punkt na obiekcie", @@ -2821,78 +2825,77 @@ lub kilka punktów dla wiązania typu "zbieżność", lub kilka stożków dla wiązania typu "współśrodkowość". - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Żaden z wybranych punktów nie został związany z odpowiednimi krzywymi, ponieważ są one częściami tego samego elementu, ponieważ są geometrią zewnętrzną lub ponieważ krawędź nie kwalifikuje się. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Żaden z wybranych punktów nie został związany na odpowiednich krzywych, albo są one częścią tego samego elementu albo obie są zewnętrzną geometrią. - + Cannot add a length constraint on this selection! Nie można dodać ograniczenia długości do wybranego obiektu! - - - - + + + + Select exactly one line or up to two points from the sketch. Wybierz dokładnie jedną linię lub do dwa punkty ze szkicu. - + Cannot add a horizontal length constraint on an axis! Nie można dodać ograniczenia długości osi w poziomie! - + Cannot add a fixed x-coordinate constraint on the origin point! Nie można dodać określonego wiązania współrzędnych x w punkcie odniesienia położenia! - - + + This constraint only makes sense on a line segment or a pair of points. Takie wiązanie ma sens tylko w przypadku odcinka lub pary punktów. - + Cannot add a vertical length constraint on an axis! Nie można dodać ograniczenia długości osi w pionie! - + Cannot add a fixed y-coordinate constraint on the origin point! Nie można dodać określonego wiązania współrzędnych y w punkcie odniesienia położenia! - + Select two or more lines from the sketch. Wybierz dwie lub więcej linii ze szkicu. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Wybierz co najmniej dwie linie ze szkicu. - - Select a valid line. - Wybierz prawidłową linię. - - - - + The selected edge is not a valid line. Wybrana krawędź nie jest prawidłową linią. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2902,35 +2905,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywej; dwa punkty końcowe; dwie krzywe i punkt. - + Select some geometry from the sketch. perpendicular constraint Wybierz dowolną geometrię ze szkicu. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nie można dodać wiązania prostopadłości w niepołączonym punkcie! - - + + One of the selected edges should be a line. Jedna z zaznaczonych krawędzi powinna być linią. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Zastosowano styczność punktu końcowego do punktu końcowego. Wiązanie zbieżności zostało usunięte. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Zastosowano wiązanie styczności punktu końcowego do krawędzi. Usunięto wiązanie punktu na obiekcie. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2940,67 +2943,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcowe; dwie krzywe i punkt. - + Select some geometry from the sketch. tangent constraint Wybierz dowolną geometrię ze szkicu. - - - + + + Cannot add a tangency constraint at an unconnected point! Nie można dodać wiązanie styczności w niepołączonym punkcie! - - + + Tangent constraint at B-spline knot is only supported with lines! Wiązanie styczne w węźle krzywej złożonej jest obsługiwane tylko z liniami! - + B-spline knot to endpoint tangency was applied instead. Zamiast tego zastosowano styczność węzła krzywej złożonej do punktu końcowego. - - + + Wrong number of selected objects! Niewłaściwa liczba wybranych obiektów! - - + + With 3 objects, there must be 2 curves and 1 point. Z trzech (3) obiektów, dwa (2) muszą być krzywymi i jeden (1) musi być punktem. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Wybierz jeden lub więcej łuków lub okręgów ze szkicu. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Wybierz tylko jeden lub więcej biegunów krzywej złożonej, albo tylko jeden lub więcej łuków lub okręgów ze szkicu, ale nie ich kombinację. - - - + + + Constraint only applies to arcs or circles. Wiązanie dotyczy tylko łuków lub okręgów. - - + + Select one or two lines from the sketch. Or select two edges and a point. Zaznacz jedną lub dwie linie ze szkicu. Albo zaznacz dwie krawędzie oraz punkt. @@ -3015,88 +3018,88 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Nie można zdefiniować wiązania kąta dla dwóch linii równoległych. - + Cannot add an angle constraint on an axis! Nie można dodać ustalonego wiązania kąta na osi! - + Select two edges from the sketch. Zaznacz dwie krawędzie ze szkicu. - + Select two or more compatible edges. Zaznacz dwie lub więcej zgodnych krawędzi. - + Sketch axes cannot be used in equality constraints. Osie szkiców nie mogą być używane z wiązaniami równości. - + Equality for B-spline edge currently unsupported. Równość pomiędzy krawędziami krzywej złożonej obecnie nie jest obsługiwana. - - - + + + Select two or more edges of similar type. Wybierz dwie lub więcej krawędzi podobnego typu. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Wybierz dwa punkty i linię symetrii, dwa punkty i punkt symetrii lub linię i punkt symetrii ze szkicu. - - + + Cannot add a symmetry constraint between a line and its end points. Nie można dodać wiązania symetrii między linią i jej punktami końcowymi. - - + + Cannot add a symmetry constraint between a line and its end points! Nie można dodać wiązania symetrii między linią i jego punktami końcowymi! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Wybierz dwa końce linii, które mają działać jak półproste, oraz krawędź reprezentującą granicę. Pierwszy wybrany punkt odpowiada indeksowi n1, drugi n2, a wartość odniesienia określa stosunek n2 / n1. - + Selected objects are not just geometry from one sketch. Wybrane obiekty są nie tylko geometrią z jednego szkicu. - + Cannot create constraint with external geometry only. Nie można tworzyć wiązań tylko przy użyciu geometrii zewnętrznej. - + Incompatible geometry is selected. Wybrano niekompatybilną geometrię. + - - - - + + + Select constraints from the sketch. Wybierz wiązania ze szkicu. @@ -3118,9 +3121,9 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Zdefiniuj stopień krzywej złożonej między 1 a %1: - + CAD Kernel Error Błąd jądra CAD @@ -3196,69 +3199,69 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Należy wybrać dwa punkty końcowe lub punkt pokrywający się. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Wybierz elementy z pojedynczego szkicu. - + No constraint selected Brak wybranych wiązań - + At least one constraint must be selected Co najmniej jedno wiązanie musi zostać wybrane - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Symetryczna konstrukcja wymaga co najmniej dwóch elementów geometrycznych, ostatni element geometryczny jest odniesieniem do budowy symetrii konstrukcyjnej. - + The last element must be a point or a line serving as reference for the symmetry construction. Ostatni element musi być punktem lub linią, służącymi jako odniesienie do budowy symetrii konstrukcyjnej. - - + + A copy requires at least one selected non-external geometric element Kopia wymaga co najmniej jednego wybranego elementu nie zewnętrznie geometrycznego - + Delete All Geometry Usuń wszystkie geometrie - + Are you really sure you want to delete all geometry and constraints? Czy na pewno chcesz usunąć całą geometrię i wiązania? - + Delete All Constraints Usuń wszystkie wiązania - + Are you really sure you want to delete all the constraints? Czy na pewno chcesz usunąć wszystkie wiązania? - + Removal of axes alignment requires at least one selected non-external geometric element Usunięcie wyrównania osi wymaga wybrania co najmniej jednego niezewnętrznego elementu geometrycznego @@ -3337,7 +3340,12 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Scale parameters - Scale parameters + Parametry skali + + + + Translate parameters + Translate parameters @@ -3650,12 +3658,12 @@ Przytrzymaj Ctrl + Alt, aby to zignorować. Długość: - + Refractive index ratio Współczynnik załamania światła - + Ratio n2/n1: Stosunek n2/n1: @@ -4069,13 +4077,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Tworzenie tablicy + Create regular polygon + Utwórz wielokąt foremny - Number of Sides: - Liczba boków: + Number of sides: + Number of sides: @@ -4094,7 +4102,7 @@ reflected on copies Task panel widgets - Task panel widgets + Widżety Panelu zadań @@ -4178,7 +4186,7 @@ Wymaga ponownego przejścia do trybu edycji, aby mógł być skuteczny. Dimension constraint - Dimension constraint + Wiązanie wymiarem @@ -4187,11 +4195,11 @@ Wymaga ponownego przejścia do trybu edycji, aby mógł być skuteczny. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Wybierz typ wiązań wymiarowania dla paska narzędzi: +"Pojedyncze narzędzie": Pojedyncze narzędzie dla wszystkich wiązań wymiarowania: Odległość, Odległość X / Y, Kąt, Promień. +"Oddzielne narzędzia": Oddzielne narzędzia dla każdego wiązania wymiarowania. +"Oba": Dostępne będzie zarówno narzędzie "Wymiar", jak i oddzielne narzędzia. +To ustawienie dotyczy tylko paska narzędzi. Niezależnie od wyboru, wszystkie narzędzia są zawsze dostępne w menu i za pomocą skrótów. @@ -4199,10 +4207,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Podczas korzystania z narzędzia wymiarowania można wybrać sposób obsługi okręgów i łuków: +"Automatycznie": Narzędzie zastosuje promień do łuków i średnicę do okręgów. +"Średnica": Narzędzie zastosuje średnicę zarówno do łuków, jak i okręgów. +"Promień": Narzędzie zastosuje promień zarówno do łuków, jak i okręgów. @@ -4212,7 +4220,7 @@ This setting is only for the toolbar. Whichever you choose, all tools are always On-View-Parameters: - On-View-Parameters: + Parametry wyświetlane w widoku: @@ -5081,112 +5089,112 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. SketcherGui::ViewProviderSketch - + Edit sketch Edytuj szkic - + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - + Do you want to close this dialog? Czy chcesz zamknąć to okno? - + Invalid sketch Nieprawidłowy szkic - + Do you want to open the sketch validation tool? Czy chcesz otworzyć narzędzie sprawdzania szkicu? - + The sketch is invalid and cannot be edited. Szkic jest nieprawidłowy i nie może być edytowany. - + Please remove the following constraint: Usuń następujące wiązania: - + Please remove at least one of the following constraints: Usuń co najmniej jedno z następujących wiązań: - + Please remove the following redundant constraint: Usuń następujący zbędny wiąz: - + Please remove the following redundant constraints: Usuń następujące, nadmiarowe wiązania: - + The following constraint is partially redundant: Następujące wiązanie jest częściowo zbędne: - + The following constraints are partially redundant: Następujące wiązania są częściowo zbędne: - + Please remove the following malformed constraint: Proszę usunąć następujące błędnie sformułowane wiązanie: - + Please remove the following malformed constraints: Proszę usunąć następujące błędnie sformułowane wiązania: - + Empty sketch Pusty szkic - + Over-constrained: Wiązania nadmierne: - + Malformed constraints: Zniekształcone wiązania: - + Redundant constraints: Wiązania nadmiarowe: - + Partially redundant: Częściowo nadmiarowe: - + Solver failed to converge Solver nie osiągnął zbieżności - + Under constrained: Niezwiązany: - + %n DoF(s) %n stopień swobody @@ -5196,7 +5204,7 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. - + Fully constrained W pełni związany @@ -5267,8 +5275,8 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Tworzy prostą kopię geometrii przyjmującej jako odniesienie ostatni wybrany punkt @@ -5276,17 +5284,17 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_CompCopy - + Clone Klonuj - + Copy Kopiuj - + Move Przesuń @@ -5294,8 +5302,8 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Ustal średnicę okręgu lub łuku @@ -5303,8 +5311,8 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Określ promień / średnicę okręgu lub łuku @@ -5312,8 +5320,8 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Ustalenie promienia okręgu lub łuku @@ -5321,8 +5329,8 @@ Odbywa się to przez analizę geometrii szkicu i wiązań. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Tworzy prostą kopię geometrii przyjmującej jako odniesienie ostatni wybrany punkt @@ -5608,8 +5616,8 @@ Wybierz metodę, aby dołączyć ten szkic do wybranych obiektów. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Przenosi geometrię przyjmując jako odniesienie ostatni wybrany punkt @@ -5934,7 +5942,7 @@ Eigen Sparse QR, algorytm jest zoptymalizowany dla macierzy rzadkich, zwykle szy ViewProviderSketch - + and %1 more i %1 więcej @@ -6163,64 +6171,65 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Parabole zostały poddane migracji. Pliki po imporcie nie otworzą się w poprzednich wersjach programu FreeCAD!! - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Błąd - + Failed to delete all geometry Nie udało się usunąć całej geometrii - + Failed to delete all constraints Nie udało się usunąć wszystkich wiązań - - + + Invalid selection Nieprawidłowy wybór - + Selection has no valid geometries. Zaznaczenie nie zawiera prawidłowych geometrii. - + Selection has no valid geometries. BSplines, Points are not supported yet. Wybór nie zawiera prawidłowych geometrii. Krzywe złożone i punkty nie są jeszcze obsługiwane. @@ -6230,18 +6239,18 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Ograniczenie ma nieprawidłowe informacje o indeksie i jest zniekształcone. - - - - - - - + + + + + + + Invalid Constraint Nieprawidłowe wiązanie @@ -6281,8 +6290,8 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Błąd podczas tworzenia bieguna krzywej złożonej - + Error creating B-spline Błąd podczas tworzenia krzywej złożonej @@ -6338,16 +6347,17 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Nie udało się dodać linii - - - - - - - - + + + + + + + + + Tool execution aborted Wykonanie operacji zostało przerwane @@ -6382,9 +6392,9 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Nie udało się przyciąć krawędzi + - Value Error Błąd wartości @@ -6436,7 +6446,12 @@ Rozstaw siatki zmienia się, jeśli staje się mniejszy niż określona liczba p Failed to scale - Failed to scale + Skalowanie nie udało się + + + + Failed to translate + Failed to translate @@ -6597,7 +6612,7 @@ Przytrzymaj CTRL, aby włączyć "Przyciąganie pod kątem". Kąt zaczyna się o Dimension - Wiązania wymiarów + Wiązanie odległości @@ -6628,7 +6643,7 @@ Kliknięcie prawym przyciskiem myszy lub naciśnięcie Esc spowoduje anulowanie. Dimension - Wymiar + Wiązania wymiarów @@ -6639,12 +6654,12 @@ Kliknięcie prawym przyciskiem myszy lub naciśnięcie Esc spowoduje anulowanie. CmdSketcherConstrainRadius - + Constrain radius Wiązanie promienia - + Fix the radius of a circle or an arc Ustalenie promienia okręgu lub łuku @@ -6761,12 +6776,12 @@ Kliknięcie prawym przyciskiem myszy lub naciśnięcie Esc spowoduje anulowanie. CmdSketcherOffset - + Offset geometry Geometria odsunięcia - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Odsunięcie wybranych geometrii. Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do wewnątrz. @@ -6787,7 +6802,9 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. - This concerns the datum constraints (e.g. distance).If you activate Clone, the tool will copy the datum.Else it will try to replace them with equalities. + Dotyczy to wiązań układu odniesienia (np. odległości). +Jeśli aktywujesz opcję Klonuj, narzędzie skopiuje układ odniesienia. +W przeciwnym razie spróbuje zastąpić je równościami. @@ -6900,12 +6917,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do CmdSketcherConstrainCoincidentUnified - + Constrain coincident Wiązanie zbieżności - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Utwórz wiązanie zbieżności między punktami, ustal punkt na krawędzi lub wiązanie koncentryczne między okręgami, łukami i elipsami. @@ -6913,12 +6930,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do CmdSketcherRotate - + Polar transform Przekształcenie biegunowe - + Rotate selected geometries, making n copies, enable creation of circular patterns. Obróć wybrane geometrie, tworząc n kopii, umożliwiając tworzenie wzorców kołowych. @@ -7027,12 +7044,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Line pattern of normal edges. - Line pattern of normal edges. + Wzór linii krawędzi. Width of normal edges. - Width of normal edges. + Szerokość krawędzi. @@ -7052,12 +7069,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Line pattern of construction edges. - Line pattern of construction edges. + Wzór linii krawędzi konstrukcyjnych. Width of construction edges. - Width of construction edges. + Szerokość krawędzi konstrukcyjnych. @@ -7077,12 +7094,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Line pattern of internal aligned edges. - Line pattern of internal aligned edges. + Wzór linii wyrównanych krawędzi wewnętrznych. Width of internal aligned edges. - Width of internal aligned edges. + Szerokość wyrównanych krawędzi wewnętrznych. @@ -7097,12 +7114,12 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Line pattern of external edges. - Line pattern of external edges. + Wzór linii krawędzi zewnętrznych. Width of external edges. - Width of external edges. + Szerokość krawędzi zewnętrznych. @@ -7200,7 +7217,7 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Copies (+'U'/ -'J') - Copies (+'U'/ -'J') + Kopiuj (+'U'/ -'J') @@ -7208,7 +7225,7 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Sides (+'U'/ -'J') - Sides (+'U'/ -'J') + Ilość boków (+ U / - J) @@ -7216,7 +7233,7 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Keep original geometries (U) - Keep original geometries (U) + Zachowaj oryginalne geometrie (U) @@ -7224,64 +7241,106 @@ Dodatnia długość odsunięcia powoduje przesunięcie na zewnątrz, a ujemna do Constrain - Constrain + Wiązanie Constrain tools. - Constrain tools. + Narzędzia wiązań. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + K&opiuj w szkicowniku - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Skopiuj wybrane geometrie i wiązania do schowka CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + &Wytnij w szkicu - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Wycina wybrane geometrie i wiązania do schowka CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + W&klej do szkicu - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Wkleja wybrane geometrie i wiązania ze schowka CmdSketcherScale - + Scale transform - Scale transform + Przekształcanie skali - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). - Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + Skaluje wybrane geometrie. Po wybraniu punktu środkowego można wprowadzić współczynnik skali lub wybrać dwa punkty odniesienia, a następnie współczynnik skali = długość (p2-środek) / długość (p1-środek). + + + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Klonuj wiązania + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index 483d455fde..08250b67ef 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringir arco ou círculo - + Constrain an arc or a circle Restringir um arco ou um círculo - + Constrain radius Restrição de raio - + Constrain diameter Restringir o diâmetro - + Constrain auto radius/diameter Restringir raio/diâmetro automáticos @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Ângulo de restrição - + Fix the angle of a line or the angle between two lines Fixar o ângulo de uma linha ou o ângulo entre duas linhas @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restrição de coincidência - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringir o diâmetro - + Fix the diameter of a circle or an arc Corrigir o diâmetro de um círculo ou arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restrição de distância - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Restrição de distância horizontal - + Fix the horizontal distance between two points or line ends Fixar a distância horizontal entre dois pontos ou extremidades de linha @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Restringir a distância vertical - + Fix the vertical distance between two points or line ends Fixar a distância vertical entre dois pontos ou extremidades de linha @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restrição igual - + Create an equality constraint between two lines or between circles and arcs Criar uma restrição de igualdade entre duas linhas ou círculos e arcos @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Restrição paralela - + Create a parallel constraint between two lines Criar uma restrição paralela entre duas linhas @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restrição perpendicular - + Create a perpendicular constraint between two lines Criar uma restrição perpendicular entre duas linhas @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Restringir um ponto sobre um objeto - + Fix a point onto an object Fixar um ponto sobre um objeto @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Restringir raio/diâmetro automáticos - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restrição simétrica - + Create a symmetry constraint between two points with respect to a line or a third point Criar uma restrição de simetria entre dois pontos @@ -602,12 +602,12 @@ em relação a uma linha ou um terceiro ponto CmdSketcherConstrainTangent - + Constrain tangent Restrição tangente - + Create a tangent constraint between two entities Criar uma restrição tangente entre duas entidades @@ -641,12 +641,12 @@ em relação a uma linha ou um terceiro ponto CmdSketcherCopy - + Copy Copiar - + Creates a simple copy of the geometry taking as reference the last selected point Cria uma cópia simples da geometria tomando como referência o último ponto selecionado @@ -1031,12 +1031,12 @@ em relação a uma linha ou um terceiro ponto CmdSketcherDeleteAllConstraints - + Delete all constraints Excluir todas as restrições - + Delete all constraints in the sketch Excluir todas as restrições do esboço @@ -1044,12 +1044,12 @@ em relação a uma linha ou um terceiro ponto CmdSketcherDeleteAllGeometry - + Delete all geometry Excluir toda a geometria - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Excluir todas as restrições e geometria do esboço atual, com exceção da geometria externa @@ -1233,12 +1233,12 @@ como referência espelhada. CmdSketcherMove - + Move Mover - + Moves the geometry taking as reference the last selected point Move a geometria usando como referência o último ponto selecionado @@ -1259,12 +1259,12 @@ como referência espelhada. CmdSketcherRectangularArray - + Rectangular array Rede retangular - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Cria um padrão retangular da geometria com referência ao último ponto selecionado @@ -1272,12 +1272,12 @@ como referência espelhada. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remover o alinhamento dos eixos - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica as restrições para remover o alinhamento dos eixos enquanto tenta preservar a relação de restrição da seleção @@ -1300,12 +1300,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostrar/ocultar geometria interna - + Show all internal geometry or hide unused internal geometry Mostrar toda a geometria interna ou ocultar a geometria interna não utilizada @@ -1313,8 +1313,8 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Selecionar restrições conflitantes @@ -1322,12 +1322,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectConstraints - + Select associated constraints Selecionar restrições associadas - + Select the constraints associated with the selected geometrical elements Selecionar as restrições associadas aos elementos geométricos selecionados @@ -1335,12 +1335,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Selecionar geometria associada - + Select the geometrical elements associated with the selected constraints Selecionar os elementos geométricos associados às restrições selecionadas @@ -1348,12 +1348,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Selecionar grau de liberdade não restrito - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Selecionar os elementos geométricos onde o calculador ainda detecta graus de liberdade sem restrições. @@ -1361,12 +1361,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Selecionar eixo horizontal - + Select the local horizontal axis of the sketch Selecionar o eixo horizontal local do esboço @@ -1374,8 +1374,8 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Selecione restrições malformadas @@ -1383,12 +1383,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectOrigin - + Select origin Selecionar a origem - + Select the local origin point of the sketch Selecionar o ponto de origem local do esboço @@ -1396,8 +1396,8 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Selecionar restrições parcialmente redundantes @@ -1405,8 +1405,8 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Selecionar restrições redundantes @@ -1414,12 +1414,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSelectVerticalAxis - + Select vertical axis Selecionar o eixo vertical - + Select the local vertical axis of the sketch Selecionar o eixo vertical local do esboço @@ -1466,12 +1466,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherSymmetry - + Symmetry Simetria - + Creates symmetric geometry with respect to the last selected line or point Cria uma geometria simétrica em relação ao último ponto ou linha selecionada @@ -1479,12 +1479,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Ativar/desativar restrição - + Activates or deactivates the selected constraints Ativa ou desativa as restrições selecionadas @@ -1505,12 +1505,12 @@ Isto irá limpar a propriedade 'Suporte', se houver. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Ativar/desativar restrição atuante ou de referência - + Set the toolbar, or the selected constraints, into driving or reference mode Colocar a barra de ferramentas, ou as restrições selecionadas, @@ -1599,54 +1599,54 @@ restrições inválidas, geometria corrompida, etc. Adicionar restrição fixa - + Add 'Block' constraint Adicionar restrição 'Bloquear' - + Add block constraint Adicionar restrição 'Bloquear' - - + + Add coincident constraint Adicionar restrição coincidente - - + + Add distance from horizontal axis constraint Adiciona restrição na distância ao eixo horizontal - - + + Add distance from vertical axis constraint Adiciona restrição na distância ao eixo vertical - - + + Add point to point distance constraint Adiciona restrição na distância ponto a ponto - - + + Add point to line Distance constraint Adicionar restrição na distância entre ponto e linha - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1655,8 +1655,8 @@ restrições inválidas, geometria corrompida, etc. - - + + Add length constraint Adiciona restrição de comprimento @@ -1778,159 +1778,159 @@ restrições inválidas, geometria corrompida, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Adiciona restrição tipo 'ponto-no-objeto' - - + + Add point to point horizontal distance constraint Adicionar restrição de distância horizontal ponto a ponto - + Add fixed x-coordinate constraint Adiciona restrição de coordenada x fixa - - + + Add point to point vertical distance constraint Adiciona restrição de distância vertical ponto a ponto - + Add fixed y-coordinate constraint Adiciona restrição de coordenada y fixa - - + + Add parallel constraint Adiciona restrição paralela - - - - - - - + + + + + + + Add perpendicular constraint Adiciona restrição perpendicular - + Add perpendicularity constraint Adicionar restrição de perpendicularidade - + Swap coincident+tangency with ptp tangency Trocar coincidência+tangência por tangência ponto-a-ponto - + Swap PointOnObject+tangency with point to curve tangency Trocar PointOnObject+tangência por tangência de ponto para curva - - - - - - - + + + + + + + Add tangent constraint Adiciona restrição tangente - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Adiciona ponto de tangência - - - - + + + + Add radius constraint Adicionar restrição de raio - - - - + + + + Add diameter constraint Adicionar restrição de diâmetro - - - - + + + + Add radiam constraint Adicionar restrição de raio - - - - + + + + Add angle constraint Adicionar restrição de ângulo - - + + Add equality constraint Adicionar restrição de igualdade - - - - - + + + + + Add symmetric constraint Adicionar restrição simétrica - + Add Snell's law constraint Adicionar restrição lei de Snell - + Toggle constraint to driving/reference Alternar o tipo da restrição entre motriz ou referência - + Activate/Deactivate constraint Ativar/desativar restrição @@ -2101,47 +2101,47 @@ restrições inválidas, geometria corrompida, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposição da geometria interna - + Create symmetric geometry Criar geometria simétrica - + Copy/clone/move geometry Copiar/clonar/mover geometria - + Create copy of geometry Criar cópia da geometria - + Delete all geometry Excluir toda a geometria - + Delete All Constraints Excluir todas as restrições - + Remove Axes Alignment Remover Alinhamento dos Eixos @@ -2159,8 +2159,8 @@ restrições inválidas, geometria corrompida, etc. Atualizar espaço virtual das restrições - + Add auto constraints Adicionar restrições automáticas @@ -2175,22 +2175,22 @@ restrições inválidas, geometria corrompida, etc. Renomear restrição do esboço - + Drag Point Arrastar Ponto - + Drag Curve Arrastar Curva - + Drag Constraint Restrição de arrasto - + Modify sketch constraints Modificar restrições do esboço @@ -2229,6 +2229,11 @@ restrições inválidas, geometria corrompida, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ restrições inválidas, geometria corrompida, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ restrições inválidas, geometria corrompida, etc. Não anexar - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ restrições inválidas, geometria corrompida, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Seleção errada @@ -2633,8 +2637,8 @@ restrições inválidas, geometria corrompida, etc. - - + + Double constraint Restrição dupla @@ -2650,8 +2654,8 @@ restrições inválidas, geometria corrompida, etc. - - + + The selected edge already has a Block constraint! A aresta selecionada já possui uma restrição de Bloqueio! @@ -2663,7 +2667,7 @@ restrições inválidas, geometria corrompida, etc. - + Select vertices from the sketch. Selecione vértices do esboço. @@ -2688,29 +2692,29 @@ restrições inválidas, geometria corrompida, etc. Uma restrição de bloqueio não pode ser adicionada se o esboço não estiver resolvido ou se existirem restrições redundantes e/ou conflitantes. - + Select one edge from the sketch. Selecione uma aresta do esboço. - + Select only edges from the sketch. Selecione somente arestas do esboço. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Erro @@ -2725,75 +2729,75 @@ restrições inválidas, geometria corrompida, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Uma tangência de ponto a ponto de extremidade foi aplicado em vez disso. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou um ponto e uma linha ou dois pontos no esboço. - + Cannot add a length constraint on an axis! Não é possível adicionar uma restrição de comprimento em um eixo! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Uma tangência de ponto de extremidade a aresta foi aplicada em vez disso. - - - - - - + + + + + + Select the right things from the sketch. Selecione as coisas corretas no esboço. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2803,93 +2807,92 @@ restrições inválidas, geometria corrompida, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Nenhum dos pontos selecionados foi restrito sobre as respectivas curvas, porque elas são partes do mesmo elemento, porque são ambos geometria externa, ou porque a aresta não é elegível. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nenhum dos pontos selecionados foi restringido para as respectivas curvas, eles são partes do mesmo elemento, ou ambos são geometria externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos no esboço. - + Cannot add a horizontal length constraint on an axis! Não é possível adicionar uma restrição de comprimento horizontal em um eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-x fixa no ponto de origem! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Não é possível adicionar uma restrição de comprimento vertical em um eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-y fixa no ponto de origem! - + Select two or more lines from the sketch. Selecione duas ou mais linhas no esboço. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Selecione pelo menos duas linhas no esboço. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2899,35 +2902,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. perpendicular constraint Selecione alguma geometria do esboço. - - + + Cannot add a perpendicularity constraint at an unconnected point! Não é possível adicionar uma restrição de perpendicularidade em um ponto não conectado! - - + + One of the selected edges should be a line. Uma das arestas selecionadas deve ser uma linha. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uma tangência de ponto a ponto foi aplicada. A restrição de coincidência foi excluída. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Uma tangência de ponto de extremidade a aresta foi aplicada. A restrição de ponto no objeto foi excluída. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2937,67 +2940,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. tangent constraint Selecione alguma geometria do esboço. - - - + + + Cannot add a tangency constraint at an unconnected point! Não é possível adicionar uma restrição de tangência em um ponto não conectado! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Número errado de objetos selecionados! - - + + With 3 objects, there must be 2 curves and 1 point. Com 3 objetos, deve haver 2 curvas e 1 ponto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Selecione um ou mais arcos ou círculos no esboço. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Selecione somente um ou mais polos B-Spline ou apenas um ou mais arcos ou círculos do esboço, mas não misturados. - - - + + + Constraint only applies to arcs or circles. Restrição aplicável somente em arcos ou círculos. - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecione uma ou duas linhas no esboço. Ou selecione um ponto e duas arestas. @@ -3012,88 +3015,88 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Uma restrição de ângulo não pode ser aplicada em duas linhas paralelas. - + Cannot add an angle constraint on an axis! Não é possível adicionar uma restrição de ângulo em um eixo! - + Select two edges from the sketch. Selecione duas arestas no esboço. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Igualdade para aresta de Bspline ainda não está suportada. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecione dois pontos e uma linha de simetria, dois pontos e um ponto de simetria ou uma linha e um ponto de simetria no esboço. - - + + Cannot add a symmetry constraint between a line and its end points. Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos finais. - - + + Cannot add a symmetry constraint between a line and its end points! Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos finais! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selecione dois pontos finais de linhas para agir como raios e uma aresta que representa um limite. O primeiro ponto selecionado corresponde ao índice n1, o segundo ao n2, e o valor de datum define a proporção n2/n1. - + Selected objects are not just geometry from one sketch. Objetos selecionados não são apenas geometria de um esboço só. - + Cannot create constraint with external geometry only. Não é possível criar restrições somente com geometria externa. - + Incompatible geometry is selected. Geometria incompatível selecionada. + - - - - + + + Select constraints from the sketch. Selecione restrições do esboço. @@ -3115,9 +3118,9 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro de Kernel CAD @@ -3193,69 +3196,69 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Selecione elementos de um esboço único. - + No constraint selected Nenhuma restrição selecionada - + At least one constraint must be selected Pelo menos uma restrição deve ser selecionada - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Uma construção simétrica requer pelo menos dois elementos geométricos, sendo o último elemento geométrico a referência para a construção da simetria. - + The last element must be a point or a line serving as reference for the symmetry construction. O último elemento deve ser um ponto ou uma linha, servindo como referência para a construção da simetria. - - + + A copy requires at least one selected non-external geometric element Uma cópia requer pelo menos um elemento geométrico não-externo selecionado - + Delete All Geometry Excluir toda a geometria - + Are you really sure you want to delete all geometry and constraints? Tem certeza que deseja excluir todas as geometria e restrições? - + Delete All Constraints Excluir todas as restrições - + Are you really sure you want to delete all the constraints? Tem certeza de que deseja excluir todas as restrições? - + Removal of axes alignment requires at least one selected non-external geometric element A remoção do alinhamento dos eixos requer, pelo menos, um elemento geométrico não externo selecionado @@ -3336,6 +3339,11 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3646,12 +3654,12 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Comprimento: - + Refractive index ratio Relação de índice de refração - + Ratio n2/n1: Relação n2/n1: @@ -4067,13 +4075,13 @@ nas cópias SketcherGui::SketcherRegularPolygonDialog - Create array - Criar matriz + Create regular polygon + Criar polígono regular - Number of Sides: - Número de lados: + Number of sides: + Number of sides: @@ -5077,112 +5085,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Editar esboço - + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - + Do you want to close this dialog? Deseja fechar este diálogo? - + Invalid sketch Esboço inválido - + Do you want to open the sketch validation tool? Você quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova as seguintes restrições redundantes: - + The following constraint is partially redundant: A restrição seguinte é parcialmente redundante: - + The following constraints are partially redundant: As restrições seguintes são parcialmente redundantes: - + Please remove the following malformed constraint: Por favor remova as seguintes restrições malformadas: - + Please remove the following malformed constraints: Por favor remova as seguintes restrições malformadas: - + Empty sketch Esboço vazio - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5190,7 +5198,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5261,8 +5269,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -5270,17 +5278,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Clonar - + Copy Copiar - + Move Mover @@ -5288,8 +5296,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Corrigir o diâmetro de um círculo ou arco @@ -5297,8 +5305,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Corrigir o raio / diâmetro de um círculo ou um arco @@ -5306,8 +5314,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixar o raio de um círculo ou um arco @@ -5315,8 +5323,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Cria uma cópia simples da geometria tomando como referência o último ponto selecionado @@ -5601,8 +5609,8 @@ Selecione um outro método para anexar este esboço aos objetos selecionados. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Move a geometria usando como referência o último ponto selecionado @@ -5926,7 +5934,7 @@ o algorítimo Eigen Sparse QR é otimizado para matrizes escassas; geralmente é ViewProviderSketch - + and %1 more and %1 more @@ -6156,64 +6164,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Erro - + Failed to delete all geometry Falha ao excluir toda a geometria - + Failed to delete all constraints Falha ao excluir todas as restrições - - + + Invalid selection Seleção inválida - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6223,18 +6232,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Restrição inválida @@ -6274,8 +6283,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6331,16 +6340,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Falha ao adicionar linha - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6375,9 +6385,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Falha ao aparar aresta + - Value Error Erro de Valor @@ -6431,6 +6441,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6630,12 +6645,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Restrição de raio - + Fix the radius of a circle or an arc Fixar o raio de um círculo ou um arco @@ -6752,12 +6767,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6890,12 +6905,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restrição de coincidência - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6903,12 +6918,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7225,12 +7240,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7238,12 +7253,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7251,12 +7266,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7264,14 +7279,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index 8de446fe23..11274b2b3a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringir o arco ou círculo - + Constrain an arc or a circle Restringir um arco ou um círculo - + Constrain radius Restringir o raio - + Constrain diameter Restringir o diâmetro - + Constrain auto radius/diameter Restringir raio/diâmetro automático @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonar - + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Restringir o ângulo - + Fix the angle of a line or the angle between two lines Corrigir o ângulo de uma linha ou o ângulo entre duas linhas @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restringir coincidentes - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringir o diâmetro - + Fix the diameter of a circle or an arc Fixar o diâmetro de um círculo ou arco @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restringir distância - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Corrigir a distância horizontal entre dois pontos ou extremidades de linha @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Corrigir a distância vertical entre dois pontos ou extremidades de linha @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restringir igualdade - + Create an equality constraint between two lines or between circles and arcs Criar uma restrição de igualdade entre duas linhas ou entre círculos e arcos @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Restringir paralelo - + Create a parallel constraint between two lines Criar uma restrição paralela entre duas linhas @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restringir perpendicular - + Create a perpendicular constraint between two lines Criar uma restrição perpendicular entre duas linhas @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Restringir um ponto sobre um objeto - + Fix a point onto an object Fixar um ponto num objeto @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Restringir raio/diâmetro automático - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Restringir refração (lei de Snell) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restringir simetria - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points @@ -602,12 +602,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Restringir a tangente - + Create a tangent constraint between two entities Criar uma restrição de tangência entre duas entidades @@ -641,12 +641,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Copiar - + Creates a simple copy of the geometry taking as reference the last selected point Cria uma cópia simples da geometria tomando como referência o último ponto selecionado @@ -1031,12 +1031,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Delete all constraints - + Delete all constraints in the sketch Delete all constraints in the sketch @@ -1044,12 +1044,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Apagar todas as geometrias - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1233,12 +1233,12 @@ as mirroring reference. CmdSketcherMove - + Move Mover - + Moves the geometry taking as reference the last selected point Move a geometria tomando como referência o último ponto selecionado @@ -1259,12 +1259,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1272,12 +1272,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remover alinhamento dos eixos - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifica as restrições para remover o alinhamento de eixos ao tentar preservar a relação de restrições da seleção @@ -1300,12 +1300,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostrar/ocultar geometria interna - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1313,8 +1313,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Selecionar restrições em conflito @@ -1322,12 +1322,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Selecionar restrições associadas - + Select the constraints associated with the selected geometrical elements Selecione as restrições associadas aos elementos geométricos selecionados @@ -1335,12 +1335,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1348,12 +1348,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1361,12 +1361,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Select horizontal axis - + Select the local horizontal axis of the sketch Select the local horizontal axis of the sketch @@ -1374,8 +1374,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1383,12 +1383,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Selecionar origem - + Select the local origin point of the sketch Selecione o ponto de origem local do esboço @@ -1396,8 +1396,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Selecionar restrições parcialmente redundantes @@ -1405,8 +1405,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Selecionar restrições redundantes @@ -1414,12 +1414,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Selecionar o eixo vertical - + Select the local vertical axis of the sketch Selecione o eixo vertical local do esboço @@ -1466,12 +1466,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Simetria - + Creates symmetric geometry with respect to the last selected line or point Cria uma geometria simétrica em relação ao ponto ou última linha selecionada @@ -1479,12 +1479,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Ativar/desativar restrição - + Activates or deactivates the selected constraints Ativa ou desativa as restrições selecionadas @@ -1505,12 +1505,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Ativar/desativar restrição dominante/referência - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1599,54 +1599,54 @@ invalid constraints, degenerated geometry, etc. Adicionar restrição fixa - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1655,8 +1655,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Adicionar restrição de comprimento @@ -1778,159 +1778,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Adicionar restrição perpendicular - + Add perpendicularity constraint Adicionar restrição de perpendicularidade - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Adicionar restrição tangente - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2101,47 +2101,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Copy/clone/move geometry - + Create copy of geometry Create copy of geometry - + Delete all geometry Apagar todas as geometrias - + Delete All Constraints Apagar todas as restrições - + Remove Axes Alignment Remover Alinhamento dos Eixos @@ -2159,8 +2159,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2175,22 +2175,22 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Arrastar Ponto - + Drag Curve Arrastar Curva - + Drag Constraint Arrastar Restrição - + Modify sketch constraints Modify sketch constraints @@ -2229,6 +2229,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ invalid constraints, degenerated geometry, etc. Não fixar - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Seleção errada @@ -2633,8 +2637,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Dupla restrição @@ -2650,8 +2654,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! A aresta selecionada já possui uma restrição de Bloqueio! @@ -2663,7 +2667,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Selecione vértices do esboço. @@ -2688,29 +2692,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Selecione uma aresta do esboço. - + Select only edges from the sketch. Selecione somente arestas do esboço. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Erro @@ -2725,75 +2729,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Uma tangência de ponto a ponto de extremidade foi aplicada como alternativa. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou uma linha e um ponto ou dois pontos do esboço. - + Cannot add a length constraint on an axis! Não é possível adicionar uma restrição de comprimento num eixo! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Selecione as coisas corretas no esboço. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2803,93 +2807,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nenhum dos pontos selecionados foi restringido para as respectivas curvas, eles são partes do mesmo elemento, ou são ambos geometria externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos do esboço. - + Cannot add a horizontal length constraint on an axis! Não é possível adicionar uma restrição de comprimento horizontal num eixo! - + Cannot add a fixed x-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-x fixa no ponto de origem! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Não é possível adicionar uma restrição de comprimento vertical a um eixo! - + Cannot add a fixed y-coordinate constraint on the origin point! Não é possível adicionar uma restrição de coordenada-y fixa no ponto de origem! - + Select two or more lines from the sketch. Selecione duas ou mais linhas do esboço. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Selecione pelo menos duas linhas do esboço. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2899,35 +2902,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. perpendicular constraint Selecione alguma geometria do esboço (sketch). - - + + Cannot add a perpendicularity constraint at an unconnected point! Não é possível adicionar uma restrição de perpendicularidade num ponto não conectado! - - + + One of the selected edges should be a line. Uma das arestas selecionadas deve ser uma linha. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uma tangência de ponto a ponto foi aplicada. A restrição de coincidência foi excluída. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2937,67 +2940,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. - + Select some geometry from the sketch. tangent constraint Selecione alguma geometria do esboço (sketch). - - - + + + Cannot add a tangency constraint at an unconnected point! Não é possível adicionar uma restrição de tangência num ponto não conectado! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Número errado de objetos selecionados! - - + + With 3 objects, there must be 2 curves and 1 point. Com 3 objetos, deve haver 2 curvas e 1 ponto. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Selecione um ou mais arcos ou círculos no esboço. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. Restrição só aplicável a arcos ou círculos. - - + + Select one or two lines from the sketch. Or select two edges and a point. Selecione uma ou duas linhas de desenho (sketch). Ou selecione um ponto e duas arestas. @@ -3012,88 +3015,88 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Uma restrição de ângulo não pode ser aplicada a duas linhas paralelas. - + Cannot add an angle constraint on an axis! Não é possível adicionar uma restrição de ângulo num eixo! - + Select two edges from the sketch. Selecione duas arestas do esboço. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Igualdade para aresta da Bspline atualmente sem suporte. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selecione dois pontos e uma linha de simetria, dois pontos e um ponto de simetria ou uma linha e um ponto de simetria do esboço. - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos extremos! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Objetos selecionados não são geometria de apenas um esboço (sketch). - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3115,9 +3118,9 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro de Kernel de CAD @@ -3193,69 +3196,69 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Selecione elementos de um esboço único. - + No constraint selected Nenhuma restrição selecionada - + At least one constraint must be selected Pelo menos uma restrição deve ser selecionada - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Uma construção simétrica requer pelo menos dois elementos geométricos, sendo o último elemento geométrico a referência para a construção da simetria. - + The last element must be a point or a line serving as reference for the symmetry construction. O último elemento deve ser um ponto ou uma linha, servindo como referência para a construção da simetria. - - + + A copy requires at least one selected non-external geometric element Uma cópia requer pelo menos um elemento geométrico não-externo selecionado - + Delete All Geometry Apagar toda a geometria - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Apagar todas as restrições - + Are you really sure you want to delete all the constraints? Tem certeza de que pretende eliminar todas as restrições? - + Removal of axes alignment requires at least one selected non-external geometric element Remoção do alinhamento de eixos requer pelo menos que um elemento geométrico não-externo seja selecionado @@ -3336,6 +3339,11 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3646,12 +3654,12 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Comprimento: - + Refractive index ratio Rácio do índice de refração - + Ratio n2/n1: Rácio n2/n1: @@ -4067,13 +4075,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Criar a matriz + Create regular polygon + Criar polígono regular - Number of Sides: - Número de lados: + Number of sides: + Number of sides: @@ -5077,112 +5085,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Editar Esboço - + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - + Do you want to close this dialog? Deseja fechar esta janela? - + Invalid sketch Esboço (sketch) inválido - + Do you want to open the sketch validation tool? Quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova a seguinte restrição redundante: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Esboço vazio - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5190,7 +5198,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5261,8 +5269,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Cria um clone da geometria tomando como referência o último ponto selecionado @@ -5270,17 +5278,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Clonar - + Copy Copiar - + Move Mover @@ -5288,8 +5296,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixar o diâmetro de um círculo ou arco @@ -5297,8 +5305,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5306,8 +5314,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Corrigir o raio de um círculo ou arco @@ -5315,8 +5323,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Cria uma cópia simples da geometria tomando como referência o último ponto selecionado @@ -5601,8 +5609,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Move a geometria tomando como referência o último ponto selecionado @@ -5927,7 +5935,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6157,64 +6165,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Erro - + Failed to delete all geometry Falha ao eliminar toda a geometria - + Failed to delete all constraints Falha ao eliminar todas as restrições - - + + Invalid selection Seleção inválida - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6224,18 +6233,18 @@ The grid spacing change if it becomes smaller than this number of pixel.A restrição tem informações de índice inválidas e está formatada incorretamente. - - - - - - - + + + + + + + Invalid Constraint Restrição invalida @@ -6275,8 +6284,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Erro ao criar o polo da B-spline - + Error creating B-spline Erro ao criar a B-spline @@ -6332,16 +6341,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Falha ao adicionar linha - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6376,9 +6386,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Falha ao aparar a aresta + - Value Error Erro de Valor @@ -6432,6 +6442,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6631,12 +6646,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Restringir o raio - + Fix the radius of a circle or an arc Corrigir o raio de um círculo ou arco @@ -6753,12 +6768,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6891,12 +6906,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restringir coincidentes - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6904,12 +6919,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7226,12 +7241,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7239,12 +7254,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7252,12 +7267,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7265,14 +7280,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 196cb26a00..34adb68645 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clonă - + Creates a clone of the geometry taking as reference the last selected point Creează o clona a geometriei luând ca referinţă ultimul punct selectat @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Constrânge un arc de cerc sau un cerc - + Constrain an arc or a circle Constrânge un arc de cerc sau un cerc - + Constrain radius Rază constrânsă - + Constrain diameter Constrângere diametru - + Constrain auto radius/diameter Constrângere automată radius/diametru @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clonă - + Creates a clone of the geometry taking as reference the last selected point Creează o clona a geometriei luând ca referinţă ultimul punct selectat @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Unghi constrans - + Fix the angle of a line or the angle between two lines Repară unghiul unei drepte sau unghiul dintre două linii @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Constrângere coincidentă - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Creează o constrângere între puncte, sau o constrângere concentrată între cercuri, arcuri și elipse @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Constrângere diametru - + Fix the diameter of a circle or an arc Fixează diametrul unui cerc sau arc de cerc @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Distanţă constrânsă - + Fix a length of a line or the distance between a line and a vertex or between two circles Repară lungimea unei linii sau distanța dintre o linie și un nod sau între două cercuri @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrânge distanța orizontală - + Fix the horizontal distance between two points or line ends Bate în cuie distanţa orizontală dintre doua puncte sau capete de linii @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrângere distanţă verticală - + Fix the vertical distance between two points or line ends Bate în cuie distanţa verticală dintre două puncte sau capete de linie @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Egalitate constransă - + Create an equality constraint between two lines or between circles and arcs Crează o egalitate constrânsă între două linii, cercuri sau arce @@ -520,12 +520,12 @@ pe vârful selectat CmdSketcherConstrainParallel - + Constrain parallel Constrângere paralelă - + Create a parallel constraint between two lines Crează o constrângere paralelă între două linii @@ -533,12 +533,12 @@ pe vârful selectat CmdSketcherConstrainPerpendicular - + Constrain perpendicular Constrângere perpendiculară - + Create a perpendicular constraint between two lines Crează o constrângere perpendiculară între două linii @@ -546,12 +546,12 @@ pe vârful selectat CmdSketcherConstrainPointOnObject - + Constrain point onto object Constrânge punct pe obiect - + Fix a point onto an object Fixează un punct de un obiect @@ -559,12 +559,12 @@ pe vârful selectat CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrângere automată radius/diametru - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Repară diametrul dacă este ales un cerc sau raza dacă este ales un stâlp ar/splină @@ -572,12 +572,12 @@ pe vârful selectat CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Creați o constrângere de lege de refracție (Legea lui Snell) între două puncte finale ale razelor @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Constrângere simetrică - + Create a symmetry constraint between two points with respect to a line or a third point Creați o constrângere de simetrie între două puncte @@ -602,12 +602,12 @@ cu privire la o linie sau un al treilea punct CmdSketcherConstrainTangent - + Constrain tangent Constrângere tangentă - + Create a tangent constraint between two entities Crează o constrângere tangentă între două entităţi @@ -641,12 +641,12 @@ cu privire la o linie sau un al treilea punct CmdSketcherCopy - + Copy Copiere - + Creates a simple copy of the geometry taking as reference the last selected point Creează o clona a geometriei luând ca referinţă ultimul punct selectat @@ -1031,12 +1031,12 @@ cu privire la o linie sau un al treilea punct CmdSketcherDeleteAllConstraints - + Delete all constraints Șterge toate constrângerile - + Delete all constraints in the sketch Ștergeți toate constrângerile din schiță @@ -1044,12 +1044,12 @@ cu privire la o linie sau un al treilea punct CmdSketcherDeleteAllGeometry - + Delete all geometry Şterge toate geometria - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Ștergeți toate geometria și constrângerile din schița curentă, cu excepția geometriei externe @@ -1233,12 +1233,12 @@ ca referință de oglindire. CmdSketcherMove - + Move Mută - + Moves the geometry taking as reference the last selected point Mutați ultimul punct la geometria luată ca referință @@ -1259,12 +1259,12 @@ ca referință de oglindire. CmdSketcherRectangularArray - + Rectangular array Matrice rectangulară - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Creează un model de matrice dreptunghiulară luând ca referință ultimul punct selectat @@ -1272,12 +1272,12 @@ ca referință de oglindire. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Elimină alinierea axelor - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifică constrângerile pentru a elimina alinierea axelor încercând în același timp să păstreze relația de constrângere a selecției @@ -1300,12 +1300,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Afișează/Ascunde geometria internă - + Show all internal geometry or hide unused internal geometry Arată toate geometria internă sau ascunderea geometriei interne neutilizate @@ -1313,8 +1313,8 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Selectaţi constrângerile contradictorii @@ -1322,12 +1322,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectConstraints - + Select associated constraints Selectează constrângerile asociate - + Select the constraints associated with the selected geometrical elements Selectați constrângerile asociate cu elementele geometrice selectate @@ -1335,12 +1335,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Selectaţi geometria asociată - + Select the geometrical elements associated with the selected constraints Selectați elementele geometrice asociate cu constrângerile selectate @@ -1348,12 +1348,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Selectați DoF fără constrângeri - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Selectaţi elementele geometrice unde Rezolvitorul încă detectează grade de libertate nelimitate. @@ -1361,12 +1361,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Selectaţi axa orizontală - + Select the local horizontal axis of the sketch Selectaţi axa orizontală locală a schiţei @@ -1374,8 +1374,8 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Selectaţi constrângerile formate incorect @@ -1383,12 +1383,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectOrigin - + Select origin Selectaţi originea - + Select the local origin point of the sketch Selectaţi punctul local de origine al schiţei @@ -1396,8 +1396,8 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Selectați constrângerile parțial redundante @@ -1405,8 +1405,8 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Selectaţi constrângerile redundante @@ -1414,12 +1414,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSelectVerticalAxis - + Select vertical axis Selectare axă verticală - + Select the local vertical axis of the sketch Selectaţi punctul local de origine al schiţei @@ -1466,12 +1466,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherSymmetry - + Symmetry Simetrie - + Creates symmetric geometry with respect to the last selected line or point Creează o geometrie simetrică în raport cu ultima linie selectată sau punct selectat @@ -1479,12 +1479,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activează/Dezactivează constrângerea - + Activates or deactivates the selected constraints Activează sau dezactivează constrângerile selectate @@ -1505,12 +1505,12 @@ Acest lucru va șterge proprietatea 'Support', dacă este cazul. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Comută constrângerea de condus/referință - + Set the toolbar, or the selected constraints, into driving or reference mode Setează bara de instrumente sau constrângerile selectate, @@ -1599,54 +1599,54 @@ constrângeri nevalide, geometrie degenerată, etc. Adaugă o constrângere fixă - + Add 'Block' constraint Adaugă constrângere 'Blocare' - + Add block constraint Adaugă constrângere 'Blocare' - - + + Add coincident constraint Adaugă constrângere de coincident - - + + Add distance from horizontal axis constraint Adăugați distanța de la constrângerea axei orizontale - - + + Add distance from vertical axis constraint Adăugați distanța față de constrângerea axei verticale - - + + Add point to point distance constraint Adăugați o constrângere de distanță punct la punct - - + + Add point to line Distance constraint Adăugați punct la linie Constrângere de distanță - - + + Add circle to circle distance constraint Adăugați restricție de distanță cerc la cerc - + Add circle to line distance constraint Adăugați cerc la constrângere de distanță pe linie @@ -1655,8 +1655,8 @@ constrângeri nevalide, geometrie degenerată, etc. - - + + Add length constraint Adăugați o constrângere de lungime @@ -1778,159 +1778,159 @@ constrângeri nevalide, geometrie degenerată, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Adăugați punct asupra constrângerii obiectului - - + + Add point to point horizontal distance constraint Adăugați constrângere de distanță orizontală punct la punct - + Add fixed x-coordinate constraint Adaugă o constrângere fixă la coordonatele x - - + + Add point to point vertical distance constraint Adaugă punct la punctul de distanță verticală constrângere - + Add fixed y-coordinate constraint Adaugă o constrângere fixă la coordonatele y - - + + Add parallel constraint Adaugă o constrângere paralelă - - - - - - - + + + + + + + Add perpendicular constraint Adaugă constrângere perpendiculară - + Add perpendicularity constraint Adaugă constrângere perpendiculară - + Swap coincident+tangency with ptp tangency Schimbă coincidentul+tangență cu tangență ptp - + Swap PointOnObject+tangency with point to curve tangency Schimbă PointOnObject+tangență cu tangență în curbă - - - - - - - + + + + + + + Add tangent constraint Adaugă constrângere tangentă - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Adaugă punct tangent de constrângere - - - - + + + + Add radius constraint Adaugă constrângere rază - - - - + + + + Add diameter constraint Adaugă o constrângere pentru diametru - - - - + + + + Add radiam constraint Adaugă constrângere de rază - - - - + + + + Add angle constraint Adaugă o constrângere de unghi - - + + Add equality constraint Adaugă constrângere pentru egalitate - - - - - + + + + + Add symmetric constraint Adaugă constrângere simetrică - + Add Snell's law constraint Adaugă constrângere legii lui Snell - + Toggle constraint to driving/reference Comută constrângerea pentru condus/referință - + Activate/Deactivate constraint Activează/Dezactivează constrângerea @@ -2101,47 +2101,47 @@ constrângeri nevalide, geometrie degenerată, etc. Alătură-te curbelor - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Prezentare geometrie internă - + Create symmetric geometry Crează geometrie simetrică - + Copy/clone/move geometry Copiază/clonă/mută geometria - + Create copy of geometry Creați o copie a geometriei - + Delete all geometry Şterge toate geometria - + Delete All Constraints Șterge toate constrângerile - + Remove Axes Alignment Elimină Alinierea Axelor @@ -2159,8 +2159,8 @@ constrângeri nevalide, geometrie degenerată, etc. Actualizează spațiul virtual al constrângerilor - + Add auto constraints Adaugă Auto-Constrângeri @@ -2175,22 +2175,22 @@ constrângeri nevalide, geometrie degenerată, etc. Redenumește constrângerea schiței - + Drag Point Trage punctul - + Drag Curve Trage Curba - + Drag Constraint Constrângere Drag - + Modify sketch constraints Modifică constrângerile schiței @@ -2229,6 +2229,11 @@ constrângeri nevalide, geometrie degenerată, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ constrângeri nevalide, geometrie degenerată, etc. Nu se poate insera un nod în afara intervalului parametrului BSpline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ constrângeri nevalide, geometrie degenerată, etc. A nu se atașa - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ constrângeri nevalide, geometrie degenerată, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selecţie greşită @@ -2633,8 +2637,8 @@ constrângeri nevalide, geometrie degenerată, etc. - - + + Double constraint Constrangere dubla @@ -2650,8 +2654,8 @@ constrângeri nevalide, geometrie degenerată, etc. - - + + The selected edge already has a Block constraint! Marginea selectată are deja o constrângere de bloc! @@ -2663,7 +2667,7 @@ constrângeri nevalide, geometrie degenerată, etc. - + Select vertices from the sketch. Selectează nodurile din Schiță. @@ -2688,29 +2692,29 @@ constrângeri nevalide, geometrie degenerată, etc. O constrângere de blocare nu poate fi adăugată dacă schița nu este rezolvată sau există constrângeri redundante și contradictorii. - + Select one edge from the sketch. Selectaţi o margine din Schiță. - + Select only edges from the sketch. Selectaţi o margine din Schiță. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Numărul de obiecte selectate nu este 3 + - Error Eroare @@ -2725,75 +2729,75 @@ constrângeri nevalide, geometrie degenerată, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Punct final la punctul final de tangenţă a fost aplicat în schimb. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Selectați două sau mai multe noduri din schiță pentru o constrângere de coincident, sau două sau mai multe cercuri, elipsuri, arcuri sau arcuri de elipsă pentru o constrângere concentrată. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Selectaţi două vârfuri din schiţă pentru o constrângere de incident, sau două cercuri, elipse, arcuri sau arcuri de elipsă pentru o constrângere concentrată. - + Select exactly one line or one point and one line or two points from the sketch. Selectati exact o linie sau un punct si o linie sau două puncte din schita. - + Cannot add a length constraint on an axis! Nu se poate adauga o constrangere de lungime pentru o axa! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Selectaţi exact o linie sau un punct şi o linie sau două puncte sau două cercuri din schiţă. - + This constraint does not make sense for non-linear curves. Această constrângere nu are sens pentru curbe neliniare. - + Endpoint to edge tangency was applied instead. Tangența la margine a fost aplicată în schimb. - - - - - - + + + + + + Select the right things from the sketch. Selectaţi lucruri corecte din schiță. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Selectaţi o muchie care nu este o greutate B-spline. @@ -2803,93 +2807,92 @@ constrângeri nevalide, geometrie degenerată, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Niciunul dintre punctele selectate nu a fost constrâns pe curbele respective, deoarece acestea sunt părți ale aceluiași element, pentru că sunt atât geometrie externă, cât şi pentru că marginea nu este eligibilă. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nici unul dintre punctele selectate nu trece prin curbele respective, sau pentru că ele fac parte din același element sau pentru că ele sunt amândouă exterioare din punct de vedere geometric. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Selectati exact o linie sau maxim doua puncte din schita. - + Cannot add a horizontal length constraint on an axis! Nu se poate adauga o constrangere de lungime orizontala pentru o axa! - + Cannot add a fixed x-coordinate constraint on the origin point! Nu se poate adăuga o constrângere fixă la coordonatele x pe punctul de origine! - - + + This constraint only makes sense on a line segment or a pair of points. Această constrângere are sens doar pe un segment de linie sau pe o pereche de puncte. - + Cannot add a vertical length constraint on an axis! Nu se poate adauga o constrangere verticala pentru o axa! - + Cannot add a fixed y-coordinate constraint on the origin point! Nu se poate adăuga o constrângere fixă la coordonatele y pe punctul de origine! - + Select two or more lines from the sketch. Selectati doua sau mai multe linii din schita. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Selectati cel putin doua linii din schita. - - Select a valid line. - Selectați o linie validă. - - - - + The selected edge is not a valid line. Marginea selectată nu este o linie validă. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2898,35 +2901,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Se acceptă combinațiile: două curbe; un punct extrem şi o curbă; două puncte extreme; două curbe şi un punct. - + Select some geometry from the sketch. perpendicular constraint Selectaţi o geometrie din schiță. - - + + Cannot add a perpendicularity constraint at an unconnected point! Nu pot adauga o constrângere perpendiculară pentru un punct neconectat! - - + + One of the selected edges should be a line. Una dintre marginile selectate trebuie sa fie o linie. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Punct final la punctul final de tangenţă a fost aplicat. Coincident restricţia a fost şters. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. A fost aplicat punctul final de la margine tangenței. Punctul de pe obiect a fost șters. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2934,67 +2937,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Există un număr de moduri în care se poate aplica această constrângere. Se accepta combinațiile: două curbe; un punct extrem şi o curbă; două puncte extreme; două curbe şi un punct. - + Select some geometry from the sketch. tangent constraint Selectaţi o geometrie din schiță. - - - + + + Cannot add a tangency constraint at an unconnected point! Nu pot adauga constrângere tangenţială pentru un punct neconectat! - - + + Tangent constraint at B-spline knot is only supported with lines! Constrângerea tangentă la nodul B-spline este suportată doar cu linii! - + B-spline knot to endpoint tangency was applied instead. Tangenţa B-spline până la final a fost aplicată. - - + + Wrong number of selected objects! Număr greșit al obiectelor selectate! - - + + With 3 objects, there must be 2 curves and 1 point. Cu 3 obiecte, trebuie să existe 2 curbe și un punct. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Selectaţi doar un arc sau un cerc din schiţă. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Selectaţi fie unul sau mai mulţi poli B-Spline sau doar unul sau mai multe arcuri sau cercuri din schiţă, dar nu amestecate. - - - + + + Constraint only applies to arcs or circles. Restricţia se aplică numai pentru arce de cerc sau cercuri. - - + + Select one or two lines from the sketch. Or select two edges and a point. Selectaţi una sau două linii din schiță, sau selectaţi două margini şi un punct. @@ -3009,88 +3012,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c O constrângere unghiulară nu poate fi aplicată la două linii paralele. - + Cannot add an angle constraint on an axis! Nu pot adăuga o constrângere de unghi pe o axă! - + Select two edges from the sketch. Selectaţi două margini din schiţă. - + Select two or more compatible edges. Selectaţi două sau mai multe margini compatibile. - + Sketch axes cannot be used in equality constraints. Axele schiţei nu pot fi folosite în constrângerile de egalitate. - + Equality for B-spline edge currently unsupported. Egalitate pentru muchiile curbelor B-spline, în prezent, nu sunt suportate. - - - + + + Select two or more edges of similar type. Selectaţi două sau mai multe margini de tip similar. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Selectaţi două puncte şi o linie de simetrie, două puncte şi un punct de simetrie sau o linie si un punct de simetrie din schiță. - - + + Cannot add a symmetry constraint between a line and its end points. Nu se poate adăuga o constrângere de simetrie între o linie și punctele sale de sfârșit. - - + + Cannot add a symmetry constraint between a line and its end points! Nu se poate adăuga o constrângere de simetrie între o linie şi punctele ei de capăt! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Selectaţi două puncte finale ale liniilor pentru a acţiona ca raze, şi o margine reprezentând o limită. Primul punct selectat corespunde indicelui n1, secundă la n2, iar valoarea de referință setează raportul n2/n1. - + Selected objects are not just geometry from one sketch. Obiectele selectate nu sunt geometria doar unui sketch. - + Cannot create constraint with external geometry only. Nu se poate crea constrângere doar cu geometrie externă. - + Incompatible geometry is selected. Geometria incompatibilă este selectată. + - - - - + + + Select constraints from the sketch. Selectează constrângerile din schiță. @@ -3112,9 +3115,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Defineste grade B-Spline intre 1 si %1: - + CAD Kernel Error Eroare a nucleului CAD @@ -3190,69 +3193,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Trebuie selectate două puncte finale sau punctul de incident. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Selectaţi elemente dintr-o singură schiță. - + No constraint selected Nici o restricţie selectată - + At least one constraint must be selected Cel puţin o constrângere trebuie să fie selectată - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. O construcţie simetric necesită cel puţin două elemente geometrice, ultimul element geometric fiind referinţa pentru construirea simetriei. - + The last element must be a point or a line serving as reference for the symmetry construction. Ultimul element trebuie să fie un punct sau o linie care serveşte drept referinţă pentru construirea simetriei. - - + + A copy requires at least one selected non-external geometric element O copie necesită cel puţin un element selectat geometrice non-extern - + Delete All Geometry Ștergeți toate elementele de geometrie - + Are you really sure you want to delete all geometry and constraints? Sunteţi sigur că doriţi să ştergeţi toate geometria şi constrângerile? - + Delete All Constraints Șterge toate constrângerile - + Are you really sure you want to delete all the constraints? Sunteți foarte sigur că doriți să ștergeți toate constrângerile? - + Removal of axes alignment requires at least one selected non-external geometric element Îndepărtarea alinierii axelor necesită cel puțin un element geometric intern selectat @@ -3334,6 +3337,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3644,12 +3652,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Lungime: - + Refractive index ratio Procentul indicelui de refracție - + Ratio n2/n1: Raportul n2/n1: @@ -4065,13 +4073,13 @@ reflectată pe copii SketcherGui::SketcherRegularPolygonDialog - Create array - Creează o matrice + Create regular polygon + Creează poligon regulat - Number of Sides: - Numărul de laturi: + Number of sides: + Number of sides: @@ -5073,112 +5081,112 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi SketcherGui::ViewProviderSketch - + Edit sketch Editaţi schiţa - + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? - + Invalid sketch Schiță nevalidă - + Do you want to open the sketch validation tool? Doriți să să deschideți scula de validare a schiței? - + The sketch is invalid and cannot be edited. Schița nu este validă și nu poate fi editată. - + Please remove the following constraint: Înlătură urmatoarea constrângere: - + Please remove at least one of the following constraints: Înlaturaţi cel puţin una din urmatoarele constrângeri: - + Please remove the following redundant constraint: Înlăturaţi urmatoarele constrângeri redundante: - + Please remove the following redundant constraints: Înlăturaţi urmatoarele constrângeri redundante: - + The following constraint is partially redundant: Următoarea constrângere este parțial redundantă: - + The following constraints are partially redundant: Următoarele constrângeri sunt parțial redundante: - + Please remove the following malformed constraint: Eliminați următoarele constrângeri informate: - + Please remove the following malformed constraints: Eliminați următoarele constrângeri informate: - + Empty sketch Schita goala - + Over-constrained: Supraconstrânse: - + Malformed constraints: Constrângeri incorecte: - + Redundant constraints: Constrângeri redundante: - + Partially redundant: Parţial redundant: - + Solver failed to converge Rezolvitorul nu a putut converge - + Under constrained: Sub constrângeri: - + %n DoF(s) %n ore @@ -5187,7 +5195,7 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi - + Fully constrained Complet constrâns @@ -5258,8 +5266,8 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Creează o clona a geometriei luând ca referinţă ultimul punct selectat @@ -5267,17 +5275,17 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_CompCopy - + Clone Clonă - + Copy Copiere - + Move Mută @@ -5285,8 +5293,8 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixează diametrul unui cerc sau arc de cerc @@ -5294,8 +5302,8 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Repară raza/diametrul unui cerc sau al unui arc @@ -5303,8 +5311,8 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixează raza unui cerc sau arc @@ -5312,8 +5320,8 @@ Acest lucru se realizează prin analizarea geometrelor și constrângerilor schi Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Creează o clona a geometriei luând ca referinţă ultimul punct selectat @@ -5598,8 +5606,8 @@ Selectați metoda pentru a atașa această schiță la obiectele selectate. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mutați ultimul punct la geometria luată ca referință @@ -5924,7 +5932,7 @@ Algoritmul QR Eigen Sparse este optimizat pentru matrici dispersați; de obicei ViewProviderSketch - + and %1 more și încă %1 @@ -6154,64 +6162,65 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Eroare - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Selectie invalida - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6221,18 +6230,18 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6272,8 +6281,8 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6329,16 +6338,17 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6373,9 +6383,9 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel Failed to trim edge + - Value Error Value Error @@ -6429,6 +6439,11 @@ Schimbarea spațierii grilei dacă devine mai mică decât acest număr de pixel Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6628,12 +6643,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Rază constrânsă - + Fix the radius of a circle or an arc Fixează raza unui cerc sau arc @@ -6750,12 +6765,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6888,12 +6903,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Constrângere coincidentă - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6901,12 +6916,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7223,12 +7238,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7236,12 +7251,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7249,12 +7264,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7262,14 +7277,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index 443ce172b8..f2cd1a3181 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Клонировать - + Creates a clone of the geometry taking as reference the last selected point Создает копию геометрии, взяв за основу последнюю выделенную точку @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Ограничение дуги или окружности - + Constrain an arc or a circle Ограничение дуги или окружности - + Constrain radius Ограничение радиуса - + Constrain diameter Ограничение диаметра - + Constrain auto radius/diameter Ограничение радиуса/диаметра автоматически @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Клонировать - + Creates a clone of the geometry taking as reference the last selected point Создает копию геометрии, взяв за основу последнюю выделенную точку @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Ограничение угла - + Fix the angle of a line or the angle between two lines Фиксировать угол отрезка или угол между двумя отрезками @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Ограничение наложения точек - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Создать ограничение совпадения между точками или ограничение концентричности между кругами, дугами и эллипсами @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Ограничение диаметра - + Fix the diameter of a circle or an arc Задать диаметр окружности или дуги @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Ограничение расстояния - + Fix a length of a line or the distance between a line and a vertex or between two circles Исправить длину линии или расстояние между линией и вершиной или между двумя кругами @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Ограничение расстояния по горизонтали - + Fix the horizontal distance between two points or line ends Фиксировать расстояние по горизонтали между двумя точками или концами отрезка @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Ограничение расстояния по вертикали - + Fix the vertical distance between two points or line ends Фиксировать расстояние по вертикали между двумя точками или концами отрезка @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Ограничение эквивалентностью - + Create an equality constraint between two lines or between circles and arcs Создать ограничение равенства между двумя отрезками или между окружностями и дугами @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Ограничение параллельности - + Create a parallel constraint between two lines Создать ограничение параллельности между двумя линиями @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Ограничение перпендикулярности - + Create a perpendicular constraint between two lines Создать ограничение перпендикулярности между двумя линиями @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Ограничить точку на объекте - + Fix a point onto an object Привязать точку к объекту @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Ограничение радиуса/диаметра автоматически - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Назначает диаметр, если выбран круг или радиус, если выбран полюс дуга/сплайн @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Ограничение преломления (закон Снеллиуса) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Создать ограничение по закону преломления света (закон Снеллиуса) между двумя конечными точками лучей и отрезком в качестве границы раздела сред. @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Ограничение симметричности - + Create a symmetry constraint between two points with respect to a line or a third point Создать ограничение симметрии между двумя точками относительно линии или третьей точки @@ -600,12 +600,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Ограничение касательности - + Create a tangent constraint between two entities Создать ограничение касательности между двумя объектами @@ -639,12 +639,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Скопировать - + Creates a simple copy of the geometry taking as reference the last selected point Создает простую копию геометрии, взяв за основу последнюю выделенную точку @@ -1029,12 +1029,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Удалить все ограничения - + Delete all constraints in the sketch Удалить все ограничения в эскизе @@ -1042,12 +1042,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Удалить всю геометрию - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Удалить всю геометрию и ограничения в текущем эскизе, за исключением внешней геометрии @@ -1218,7 +1218,7 @@ as mirroring reference. Wrong selection - Неправильное выделение + Неправильный выбор @@ -1229,12 +1229,12 @@ as mirroring reference. CmdSketcherMove - + Move Переместить - + Moves the geometry taking as reference the last selected point Перемещает геометрии, принимая в качестве ориентира последнюю выбранную точку @@ -1255,12 +1255,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Прямоугольный массив - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Создаёт прямоугольный массив геометрии, в качестве привязки используется последняя выделенная точка @@ -1268,12 +1268,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Удалить выравнивание осей - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Изменяет ограничения, чтобы удалить выравнивание осей, пытаясь сохранить взаимосвязь ограничения выделения. @@ -1296,12 +1296,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Показать/скрыть внутреннюю геометрию - + Show all internal geometry or hide unused internal geometry Показать всю внутреннюю геометрию или скрыть неиспользуемую внутреннюю геометрию @@ -1309,8 +1309,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Выделить конфликтующие ограничения @@ -1318,12 +1318,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Выделить связанные ограничения - + Select the constraints associated with the selected geometrical elements Выделить ограничения, связанные с выбранными геометрическими элементами @@ -1331,12 +1331,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Выделить связанную геометрию - + Select the geometrical elements associated with the selected constraints Выделить геометрические элементы, связанные с выбранными ограничениями @@ -1344,12 +1344,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Выделить геометрию, имеющую неограниченные Степени Свободы - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Выделить геометрические элементы, в которых решатель по-прежнему обнаруживает неограниченные степени свободы. @@ -1357,12 +1357,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Выбрать горизонтальную ось - + Select the local horizontal axis of the sketch Выберите локальную горизонтальную ось эскиза @@ -1370,8 +1370,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Выбрать искаженные ограничения @@ -1379,12 +1379,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Выбрать начало координат - + Select the local origin point of the sketch Выберите локальное начало координат эскиза @@ -1392,8 +1392,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Выделить частично избыточные ограничения @@ -1401,8 +1401,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Выделить избыточные ограничения @@ -1410,12 +1410,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Выбрать вертикальную ось - + Select the local vertical axis of the sketch Выбрать локальную вертикальную ось эскиза @@ -1462,12 +1462,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Симметрия - + Creates symmetric geometry with respect to the last selected line or point Создает симметричную геометрию относительно последней выбранной линии или точки @@ -1475,12 +1475,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Вкл/выкл ограничение - + Activates or deactivates the selected constraints Вкл/выкл выбранные ограничения @@ -1501,12 +1501,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Переключить ограничения в построительные/основные - + Set the toolbar, or the selected constraints, into driving or reference mode Переключает панель инструментов или преобразует выбранные ограничения, в режим построительной/основной геометрии @@ -1594,54 +1594,54 @@ invalid constraints, degenerated geometry, etc. Добавить фиксированное ограничение - + Add 'Block' constraint Добавить ограничение 'Блок' - + Add block constraint Добавить ограничение блока - - + + Add coincident constraint Добавить ограничение совпадения - - + + Add distance from horizontal axis constraint Добавить ограничение расстояния от горизонтальной оси - - + + Add distance from vertical axis constraint Добавить ограничение расстояния от вертикальной оси - - + + Add point to point distance constraint Добавить точку к ограничению расстояния до точки - - + + Add point to line Distance constraint Добавить точку к ограничению расстояния до линии - - + + Add circle to circle distance constraint Добавить круг к ограничениям расстояния круга - + Add circle to line distance constraint Добавить круг к ограниченияю линейного расстояния @@ -1650,8 +1650,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Добавить ограничение длины @@ -1773,159 +1773,159 @@ invalid constraints, degenerated geometry, etc. Добавить ограничение расстояния по Y - + Add point to circle Distance constraint Добавить точку в Ограничение расстояния круга - - + + Add point on object constraint Добавить точку на ограничение объекта - - + + Add point to point horizontal distance constraint Добавить точку к ограничению расстояния по горизонтали - + Add fixed x-coordinate constraint Добавить фиксированное ограничение X-координаты - - + + Add point to point vertical distance constraint Добавить точку к ограничению расстояния по вертикали - + Add fixed y-coordinate constraint Добавить фиксированное ограничение Y-координаты - - + + Add parallel constraint Добавить ограничение параллельности - - - - - - - + + + + + + + Add perpendicular constraint Добавить ограничение перпендикулярности - + Add perpendicularity constraint Добавить ограничение перпендикулярности - + Swap coincident+tangency with ptp tangency Поменять совпадение + касание на ptp касание - + Swap PointOnObject+tangency with point to curve tangency Поменять точка на объекте + касательная на касательную к кривой - - - - - - - + + + + + + + Add tangent constraint Добавить касательное ограничение - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Добавить точку касательного ограничения - - - - + + + + Add radius constraint Добавить ограничение радиуса - - - - + + + + Add diameter constraint Добавить ограничение диаметра - - - - + + + + Add radiam constraint Добавить ограничение радиуса - - - - + + + + Add angle constraint Добавить ограничение угла - - + + Add equality constraint Добавить ограничение равенства - - - - - + + + + + Add symmetric constraint Добавить ограничение симметричности - + Add Snell's law constraint Добавить ограничение по закону Снеллиуса - + Toggle constraint to driving/reference Переключить ограничения в построительные/основные - + Activate/Deactivate constraint Вкл/выкл ограничение @@ -2096,47 +2096,47 @@ invalid constraints, degenerated geometry, etc. Объединить кривые - + Cut in Sketcher - Cut in Sketcher + Вырезать эскиз - + Paste in Sketcher - Paste in Sketcher + Вставить в эскиз - + Exposing Internal Geometry Раскрытие внутренней геометрии - + Create symmetric geometry Создать симметричную геометрию - + Copy/clone/move geometry Копировать/клонировать/переместить геометрию - + Create copy of geometry Создать копию геометрии - + Delete all geometry Удалить всю геометрию - + Delete All Constraints Удалить все ограничения - + Remove Axes Alignment Удалить выравнивание осей @@ -2154,8 +2154,8 @@ invalid constraints, degenerated geometry, etc. Обновить ограничения виртуального пространства - + Add auto constraints Добавить автоматические ограничения @@ -2170,22 +2170,22 @@ invalid constraints, degenerated geometry, etc. Переименовать ограничение эскиза - + Drag Point Перетащить точку - + Drag Curve Перетащить кривую - + Drag Constraint Перетащить ограничение - + Modify sketch constraints Изменить ограничения эскиза @@ -2222,7 +2222,12 @@ invalid constraints, degenerated geometry, etc. Scale geometries - Scale geometries + Масштабирование геометрии + + + + Translate geometries + Translate geometries @@ -2328,16 +2333,16 @@ invalid constraints, degenerated geometry, etc. Узел не может быть вставлен за пределы диапазона параметров BSpline. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Индекс параметра ToolWidget вне диапазона @@ -2403,20 +2408,8 @@ invalid constraints, degenerated geometry, etc. Не присоединять - - - - - - - - - - - - @@ -2427,135 +2420,146 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection - Неправильный выбор + Неправильное выделение @@ -2628,8 +2632,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Избыточное ограничение @@ -2645,8 +2649,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Выбранная линия уже имеет Блочное ограничение! @@ -2658,7 +2662,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Выберите вершины из эскиза. @@ -2683,29 +2687,29 @@ invalid constraints, degenerated geometry, etc. Блокирующее ограничение не может быть добавлено, если эскиз не решаем или имеются избыточные или конфликтующие ограничения. - + Select one edge from the sketch. Выберите одну линию из эскиза. - + Select only edges from the sketch. Выберите линии из эскиза. - + Only tangent-via-point is supported with a B-spline. - Only tangent-via-point is supported with a B-spline. + Поддерживается только точка касательная с B-сплайном. - + Number of selected objects is not 3 Количество выбранных объектов не 3 + - Error Ошибка @@ -2720,75 +2724,75 @@ invalid constraints, degenerated geometry, etc. Выбранные элементы не могут принимать горизонтальное или вертикальное ограничение! - + Endpoint to endpoint tangency was applied instead. Вместо конечной точки применена касательная. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Выберите две или более вершины из эскиза для ограничения совпадения, или два или более кругов, эллипсов, дуг или дуг эллипса для концентрационного ограничения. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Выберите две вершины из эскиза для ограничения совпадения, или два круга, эллипса, дуги или дуги эллипса для ограничения концентрации. - + Select exactly one line or one point and one line or two points from the sketch. Выделите либо один отрезок, либо точку и отрезок, либо две точки. - + Cannot add a length constraint on an axis! Нельзя наложить ограничение длины на ось! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Выделить ровно одну линию или одну точку и одну линию или две точки или два круга из эскиза. - + This constraint does not make sense for non-linear curves. Это ограничение не имеет смысла для нелинейных кривых. - + Endpoint to edge tangency was applied instead. Вместо этого было применено касание конечной точки к краю. - - - - - - + + + + + + Select the right things from the sketch. Выберите нужные объекты из эскиза. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Выберите край, который не является B-сплайном. @@ -2798,93 +2802,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Выберите либо несколько точек, либо несколько окружностей для концентричности. - + Select either one point and several curves, or one curve and several points Выберите либо одну точку и несколько кривых, либо одну кривую и несколько точек - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Выберите либо одну точку и несколько кривых, либо одну кривую и несколько точек для точкиНаОбъекте, либо несколько точек для совпадения, либо несколько окружностей для концентричности. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Ни одна из выбранных точек не была ограничена на соответствующие кривые, поскольку они являются частями одного и того же элемента, потому что они и внешняя геометрия, или потому, что край не является допустимым. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ни одна из выбранных точек не была ограничена соответствующими кривыми либо потому, что они являются частями одного и того же элемента, либо потому, что они являются внешней геометрией. - + Cannot add a length constraint on this selection! Невозможно добавить ограничение длины для этого выделения! - - - - + + + + Select exactly one line or up to two points from the sketch. Выберите один отрезок или две точки эскиза. - + Cannot add a horizontal length constraint on an axis! Нельзя наложить ограничение длины на ось! - + Cannot add a fixed x-coordinate constraint on the origin point! Невозможно ограничить X-координату точки начала координат! - - + + This constraint only makes sense on a line segment or a pair of points. Это ограничение имеет смысл только для сегмента линии или пары точек. - + Cannot add a vertical length constraint on an axis! Нельзя наложить ограничение длины на ось! - + Cannot add a fixed y-coordinate constraint on the origin point! Невозможно ограничить Y-координату точки начала координат! - + Select two or more lines from the sketch. Выберите два или более отрезков эскиза. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Нужно выделить как минимум две линии. - - Select a valid line. - Выберите правильную линию. - - - - + The selected edge is not a valid line. Выделенное ребро некорректно. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2894,35 +2897,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Допустимы следующие комбинации: две кривые; концевая точка и кривая; две концевых точки; две кривых и точка. - + Select some geometry from the sketch. perpendicular constraint Выделите геометрические элементы на эскизе. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не удаётся наложить ограничение перпендикулярности на точку, так как выделенная точка не является концом кривой. - - + + One of the selected edges should be a line. Один из выбранных элементов должен быть линией. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Применена касательность конечной точки к конечной точке. Ограничение совпадения было удалено. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Было применено касание конечной точки к краю. Точка ограничения объекта удалена. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2930,67 +2933,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Существует несколько способов применения этого ограничения. Допустимые комбинации: две кривые; конечная точка и кривая; две конечные точки; две кривые и точка. - + Select some geometry from the sketch. tangent constraint Выделите геометрические элементы на эскизе. - - - + + + Cannot add a tangency constraint at an unconnected point! Не удаётся наложить ограничение касательности на точку, так как выделенная точка не является концом кривой. - - + + Tangent constraint at B-spline knot is only supported with lines! Зависимость касательной в узле B-сплайн поддерживается только линиями! - + B-spline knot to endpoint tangency was applied instead. Вместо этого был применен узел B-сплайна к касанию конечной точки. - - + + Wrong number of selected objects! Неправильное количество выбранных объектов! - - + + With 3 objects, there must be 2 curves and 1 point. С 3 объектами должно быть 2 кривых и 1 точка. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Сначала выделите одну или несколько окружностей или дуг окружности из эскиза. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Выберите либо только один или несколько полюсов B-сплайна, либо только одну или несколько дуг или окружностей из эскиза, но не смешивайте их. - - - + + + Constraint only applies to arcs or circles. Ограничение применимо только к дугам или окружностям. - - + + Select one or two lines from the sketch. Or select two edges and a point. Нужно выделить одну линию, или две линии, или две кривые и точку. @@ -3005,88 +3008,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Задать ограничение угла между параллельными линиями невозможно. - + Cannot add an angle constraint on an axis! Наложить ограничение угла на ось невозможно! - + Select two edges from the sketch. Выберите два ребра в эскизе. - + Select two or more compatible edges. Выберите совместимые рёбра, два или более. - + Sketch axes cannot be used in equality constraints. Оси эскиза нельзя использовать в ограничениях равенства. - + Equality for B-spline edge currently unsupported. Равенство для края B-сплайна в настоящее время не поддерживается. - - - + + + Select two or more edges of similar type. Выберите рёбра аналогичного типа, два или более. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Выделите две точки и линию симметрии, либо две точки и точку симметрии, либо линию и точку симметрии. - - + + Cannot add a symmetry constraint between a line and its end points. Невозможно добавить ограничение симметрии между линией и её конечными точками. - - + + Cannot add a symmetry constraint between a line and its end points! Не удается добавить ограничение симметрии, так как обе точки являются концами линии, задающей ось симметрии. - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Выберите две конечные точки линий, которые будут выступать в качестве лучей, и ребро, представляющее собой границу. Первая выбранная точка соответствует индексу n1, вторая — n2, а значение привязки задает отношение n2/n1. - + Selected objects are not just geometry from one sketch. Выбранные объекты не являются только геометрией из одного эскиза. - + Cannot create constraint with external geometry only. Невозможно создать ограничение с использованием только внешней геометрии. - + Incompatible geometry is selected. Выбрана несовместимая геометрия. + - - - - + + + Select constraints from the sketch. Выделить ограничения в эскизе. @@ -3108,9 +3111,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Укажите степень B-сплайна, между 1 и %1: - + CAD Kernel Error Ошибка ядра CAD @@ -3186,69 +3189,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Следует выбрать две конечные точки или совпадающие точки. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Выделите элементы из одного эскиза. - + No constraint selected Не выделено ограничений - + At least one constraint must be selected Должно быть выделено хотя бы одно ограничение. - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Симметричная конструкция требует по крайней мере двух геометрических элементов, последний геометрический элемент является эталоном для построения симметрии - + The last element must be a point or a line serving as reference for the symmetry construction. Последний элемент должен быть точкой или линией, служащей в качестве ориентира для построения симметрии. - - + + A copy requires at least one selected non-external geometric element Для копирования требуется хотя бы один выбранный не внешний геометрический элемент - + Delete All Geometry Удалить всю геометрию - + Are you really sure you want to delete all geometry and constraints? Вы действительно уверены, что хотите удалить всю геометрию и ограничения? - + Delete All Constraints Удалить все ограничения - + Are you really sure you want to delete all the constraints? Вы уверены, что хотите удалить все ограничения? - + Removal of axes alignment requires at least one selected non-external geometric element Для удаления выравнивания осей требуется выбрать по крайней мере один не-внешний геометрический элемент @@ -3327,7 +3330,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters - Scale parameters + Шкала масштабирования + + + + Translate parameters + Translate parameters @@ -3639,12 +3647,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Длина: - + Refractive index ratio Отношение показателей преломления - + Ratio n2/n1: Отношение n2/n1: @@ -4057,13 +4065,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Создать массив + Create regular polygon + Создать правильный многоугольник - Number of Sides: - Количество сторон: + Number of sides: + Number of sides: @@ -4082,7 +4090,7 @@ reflected on copies Task panel widgets - Task panel widgets + Виджеты панели задач @@ -4166,7 +4174,7 @@ Requires to re-enter edit mode to take effect. Dimension constraint - Dimension constraint + Ограничение размера @@ -5067,112 +5075,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Редактировать эскиз - + A dialog is already open in the task panel Диалог уже открыт в панели задач - + Do you want to close this dialog? Вы хотите закрыть этот диалог? - + Invalid sketch Эскиз повреждён - + Do you want to open the sketch validation tool? Открыть инструмент проверки наброска? - + The sketch is invalid and cannot be edited. Эскиз содержит ошибки и не может быть изменен. - + Please remove the following constraint: Пожалуйста, удалите следующие ограничения: - + Please remove at least one of the following constraints: Пожалуйста, удалите по крайней мере одно из следующих ограничений: - + Please remove the following redundant constraint: Пожалуйста, удалите следующие избыточные ограничения: - + Please remove the following redundant constraints: Пожалуйста, удалите следующие избыточные ограничения: - + The following constraint is partially redundant: Следующее ограничение частично избыточно: - + The following constraints are partially redundant: Следующие ограничения частично избыточны: - + Please remove the following malformed constraint: Пожалуйста, удалите следующее искаженное ограничение: - + Please remove the following malformed constraints: Пожалуйста, удалите следующие некорректые ограничения: - + Empty sketch Эскиз не содержащий элементов - + Over-constrained: Чрезмерно ограничено: - + Malformed constraints: Неправильные ограничения: - + Redundant constraints: Избыточные ограничения: - + Partially redundant: Частично избыточны: - + Solver failed to converge Решатель не смог сместиться - + Under constrained: Без ограничений: - + %n DoF(s) %n DoF(Степени свободы) @@ -5182,7 +5190,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Полностью ограничен @@ -5253,8 +5261,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Создает копию геометрии, взяв за основу последнюю выделенную точку @@ -5262,17 +5270,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Клонировать - + Copy Копировать - + Move Переместить @@ -5280,8 +5288,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Задать диаметр окружности или дуги @@ -5289,8 +5297,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Исправляет радиус/диаметр окружности или дуги @@ -5298,8 +5306,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Зафиксировать радиус окружности или дуги @@ -5307,8 +5315,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Создает простую копию геометрии, взяв за основу последнюю выделенную точку @@ -5593,8 +5601,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Перемещает геометрии, принимая в качестве ориентира последнюю выбранную точку @@ -5918,7 +5926,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more и еще %1 @@ -6148,64 +6156,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Ошибки - + Failed to delete all geometry Не удалось удалить всю геометрию - + Failed to delete all constraints Не удалось удалить все ограничения - - + + Invalid selection Неверный выбор - + Selection has no valid geometries. Выборка не имеет допустимой геометрии. - + Selection has no valid geometries. BSplines, Points are not supported yet. В выборке нет допустимых геометрий. BSplines, точки пока не поддерживаются. @@ -6215,18 +6224,18 @@ The grid spacing change if it becomes smaller than this number of pixel.Ограничение имеет неверную индексную информацию и является неправильным. - - - - - - - + + + + + + + Invalid Constraint Недопустимое ограничение @@ -6266,8 +6275,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Ошибка при создании полюса B-сплайна - + Error creating B-spline Ошибка создания B-сплайна @@ -6323,16 +6332,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Не удалось добавить строку - - - - - - - - + + + + + + + + + Tool execution aborted Выполнение инструмента прервано @@ -6367,9 +6377,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Не удалось обрезать ребро + - Value Error Ошибка значения @@ -6423,6 +6433,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6622,12 +6637,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Ограничение радиуса - + Fix the radius of a circle or an arc Зафиксировать радиус окружности или дуги @@ -6744,12 +6759,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Геометрия смещения - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Сместить выбранную геометрию. Положительная длина смещения заставляет смещение идти наружу, отрицательная длина — внутрь. @@ -6882,12 +6897,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Ограничение наложения точек - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Создайте зависимость совпадения между точками или зафиксируйте точку на ребре, или зависимость концентричности между кругами, дугами и эллипсами @@ -6895,12 +6910,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Полярное преобразование - + Rotate selected geometries, making n copies, enable creation of circular patterns. Поверните выбранную геометрию, сделав n копий, включите создание круговых узоров. @@ -7206,64 +7221,106 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrain - Constrain + Ограничение Constrain tools. - Constrain tools. + Инструменты ограничений. CmdSketcherCopyClipboard - + C&opy in sketcher - C&opy in sketcher + Копировать из эскиза - + Copy selected geometries and constraints to the clipboard - Copy selected geometries and constraints to the clipboard + Копировать выделенную геометрию с ограничениями в буфер обмена CmdSketcherCut - + C&ut in sketcher - C&ut in sketcher + Вырезать эскиз - + Cut selected geometries and constraints to the clipboard - Cut selected geometries and constraints to the clipboard + Обрезать выбранную геометрию с ограничениями в буфер обмен CmdSketcherPaste - + P&aste in sketcher - P&aste in sketcher + Вставить в эскиз - + Paste selected geometries and constraints from the clipboard - Paste selected geometries and constraints from the clipboard + Вставить выбранную геометрию с ограничениями из буфера обмена CmdSketcherScale - + Scale transform - Scale transform + Шкала трансформации - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Ограничения клонирования + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index b41c8da8fd..2598b6a495 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Kloniraj - + Creates a clone of the geometry taking as reference the last selected point Ustvari klon geometrije glede na zadnjo izbrano točko @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Omeji krožni lok ali krožnico - + Constrain an arc or a circle Omeji krožni lok ali krožnico - + Constrain radius Omeji polmer - + Constrain diameter Omeji premer - + Constrain auto radius/diameter Samodejno omeji polmer/premer @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Kloniraj - + Creates a clone of the geometry taking as reference the last selected point Ustvari klon geometrije glede na zadnjo izbrano točko @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Kotno omejilo - + Fix the angle of a line or the angle between two lines Določi kót daljice ali kót med dvema daljicama @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Omeji sovpadanje - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Ustvari sovpadno omejilo za točke ali sosrediščno omejilo za kroge, loke in elipse @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Omeji premer - + Fix the diameter of a circle or an arc Določi premer krožnice ali krožnega loka @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Omeji razdaljo - + Fix a length of a line or the distance between a line and a vertex or between two circles Določi dolžino daljice ali razdaljo med daljico in ogliščem oz. med dvema krogoma @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Omeji vodoravno razdaljo - + Fix the horizontal distance between two points or line ends Določi vodoravno razdaljo med dvema točkama ali krajiščema @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Omeji navpično razdaljo - + Fix the vertical distance between two points or line ends Določi navpično razdaljo med dvema točkama ali krajiščema @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Omeji na enakost - + Create an equality constraint between two lines or between circles and arcs Ustvari enakostno omejilo med dvema črtama ali med krogi in loki @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Omeji z vzporednostjo - + Create a parallel constraint between two lines Ustvari omejilo vzporednosti med dvema črtama @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Omeji s pravokotnostjo - + Create a perpendicular constraint between two lines Ustvari pravokotno omejilo med dvema črtama @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Omeji točko na predmet - + Fix a point onto an object Pritrdi točko na predmet @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Samodejno omeji polmer/premer - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Zakleni premer, če izbran krog, oz. polmer, če je izbran lok/tečaj zlepka @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Lomno omejilo (lomni zakon) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Ustvari omejitev lomnega zakona med dvema končnima točkama žarkov @@ -586,12 +586,12 @@ in robom, ki predstavlja mejo. CmdSketcherConstrainSymmetric - + Constrain symmetrical Omeji s somernostjo - + Create a symmetry constraint between two points with respect to a line or a third point Ustvari omejitev somernosti med dvema točkama @@ -601,12 +601,12 @@ glede na črto ali tretjo točko CmdSketcherConstrainTangent - + Constrain tangent Omeji z dotikalnostjo - + Create a tangent constraint between two entities Ustvari dotikalno omejilo med dvema prvinama @@ -640,12 +640,12 @@ glede na črto ali tretjo točko CmdSketcherCopy - + Copy Kopiraj - + Creates a simple copy of the geometry taking as reference the last selected point Ustvari preprosto kopijo geometrije glede na zadnjo izbrano točko @@ -1030,12 +1030,12 @@ glede na črto ali tretjo točko CmdSketcherDeleteAllConstraints - + Delete all constraints Izbriši vsa omejila - + Delete all constraints in the sketch Izbriši vsa omejila v očrtu @@ -1043,12 +1043,12 @@ glede na črto ali tretjo točko CmdSketcherDeleteAllGeometry - + Delete all geometry Izbriši vso geometrijo - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Izbriši vso geometrijo in omejila trenutnega očrta razen zunanjih geometrij @@ -1231,12 +1231,12 @@ preko X ali Y osi, oz. preko izhodiščne točke. CmdSketcherMove - + Move Premakni - + Moves the geometry taking as reference the last selected point Premakne geometrijo glede na zadnjo izbrano točko @@ -1257,12 +1257,12 @@ preko X ali Y osi, oz. preko izhodiščne točke. CmdSketcherRectangularArray - + Rectangular array Pravokotna razpostavitev - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Ustvari pravokotni vzorec geometrije glede na zadnjo izbrano točko @@ -1270,12 +1270,12 @@ preko X ali Y osi, oz. preko izhodiščne točke. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Ukini poravnavo z osmi - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Spremeni omejila tako, da ukine poravnavanje z osmi, hkrati pa skuša ohraniti odnose omejil izbranih predmetov @@ -1298,12 +1298,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Prikaži/Skrij notranjo geometrijo - + Show all internal geometry or hide unused internal geometry Prikaži vso notranjo geometrijo ali skrij neuporabljeno notranjo geometrijo @@ -1311,8 +1311,8 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Izberi omejila v sporu @@ -1320,12 +1320,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectConstraints - + Select associated constraints Izberi vezana omejila - + Select the constraints associated with the selected geometrical elements Izberi omejila, vezana na izbrane geometrijske prvine @@ -1333,12 +1333,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Izberi vezano geometrijo - + Select the geometrical elements associated with the selected constraints Izberi geometrijske prvine, vezane na izbrana omejila @@ -1346,12 +1346,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Izberi neomejeno prostostno stopnjo - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Izberi geometrijske prvine, pri katerih reševalnik še vedno zazna neomejene prostostne stopnje. @@ -1359,12 +1359,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Izberite vodoravno os - + Select the local horizontal axis of the sketch Izberite krajevno vodoravno os očrta @@ -1372,8 +1372,8 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Izberi narobi oblikovana omejila @@ -1381,12 +1381,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectOrigin - + Select origin Izberite izhodišče - + Select the local origin point of the sketch Izberite krajevno izhodišče očrta @@ -1394,8 +1394,8 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Izberi delno odvečna omejila @@ -1403,8 +1403,8 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Izberi odvečna omejila @@ -1412,12 +1412,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSelectVerticalAxis - + Select vertical axis Izberite navpično os - + Select the local vertical axis of the sketch Izberite krajevno navpično os očrta @@ -1464,12 +1464,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherSymmetry - + Symmetry Somernost - + Creates symmetric geometry with respect to the last selected line or point Ustvari somerno geometrijo glede na zadnjo izbrano daljico ali točko @@ -1477,12 +1477,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Omogoči/onemogoči omejilo - + Activates or deactivates the selected constraints Omogoči ali onemogoči izbrana omejila @@ -1503,12 +1503,12 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Preklopi med gonilnim in sklicnim omejilom - + Set the toolbar, or the selected constraints, into driving or reference mode Nastavi orodno vrstico ali mejilo @@ -1597,54 +1597,54 @@ neveljavna omejila, izrojene geometrije, ... Dodaj pritrditveno omejilo - + Add 'Block' constraint Dodaj zbirno omejilo - + Add block constraint Dodaj zbirno omejilo - - + + Add coincident constraint Dodaj omejilo sovpadanja - - + + Add distance from horizontal axis constraint Dodaj omejilo oddaljenosti od vodoravne osi - - + + Add distance from vertical axis constraint Dodaj omejilo oddaljenosti od navpične osi - - + + Add point to point distance constraint Dodaj omejilo razdalje med točkama - - + + Add point to line Distance constraint Dodaj omejilo razdalje med točko in daljico - - + + Add circle to circle distance constraint Dodaj omejilo razdalje med krogoma - + Add circle to line distance constraint Dodaj omejilo razdalje med krogom in črto @@ -1653,8 +1653,8 @@ neveljavna omejila, izrojene geometrije, ... - - + + Add length constraint Dodaj dolžinsko omejilo @@ -1776,159 +1776,159 @@ neveljavna omejila, izrojene geometrije, ... Dodaj omejilo razdalje po Y-u - + Add point to circle Distance constraint Dodaj omejilo razdalje med točko in krožnico - - + + Add point on object constraint Dodaj točko predmetnemu omejilu - - + + Add point to point horizontal distance constraint Dodaj omejilo vodoravne razdalje med točkama - + Add fixed x-coordinate constraint Dodaj omejilo nespremelnjive sorednice x - - + + Add point to point vertical distance constraint Dodaj omejilo navpične razdalje med točkama - + Add fixed y-coordinate constraint Dodaj omejilo nespremelnjive sorednice y - - + + Add parallel constraint Dodaj vzporednostno omejilo - - - - - - - + + + + + + + Add perpendicular constraint Dodaj pravokotnostno omejilo - + Add perpendicularity constraint Dodaj pravokotnostno omejilo - + Swap coincident+tangency with ptp tangency Zamenjaj sovpadanje + dotikalnost z dotikalnostjo vzporednice skozi točko - + Swap PointOnObject+tangency with point to curve tangency Zamenjaj TočkaNaPredmetu+dotikalnost s točka v dotikalnost na krivuljo - - - - - - - + + + + + + + Add tangent constraint Dodaj dotikalnostno omejilo - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Dodaj točko dotikalnega omejila - - - - + + + + Add radius constraint Dodaj polmerno omejilo - - - - + + + + Add diameter constraint Dodaj premerno omejilo - - - - + + + + Add radiam constraint Dodaj polmer-premerno omejilo - - - - + + + + Add angle constraint Dodaj kotno omejilo - - + + Add equality constraint Dodaj enakostno omejilo - - - - - + + + + + Add symmetric constraint Dodaj somernostno omejilo - + Add Snell's law constraint Dodaj lomno omejilo - + Toggle constraint to driving/reference Preklapi med gonilnostjo/gnanostjo omejila - + Activate/Deactivate constraint Omogoči/onemogoči omejilo @@ -2099,47 +2099,47 @@ neveljavna omejila, izrojene geometrije, ... Združi krivulje - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Izpostavi notranjo geometrijo - + Create symmetric geometry Ustvari somerno geometrijo - + Copy/clone/move geometry Kopiraj/kloniraj/premakni geometrijo - + Create copy of geometry Ustvari kopijo geometrije - + Delete all geometry Izbriši vso geometrijo - + Delete All Constraints Izbriši Vse Omejitve - + Remove Axes Alignment Ukini poravnavo z osmi @@ -2157,8 +2157,8 @@ neveljavna omejila, izrojene geometrije, ... Posodobi navidezni prostor omejila - + Add auto constraints Dodaj samodejna omejila @@ -2173,22 +2173,22 @@ neveljavna omejila, izrojene geometrije, ... Preimenuj očrtno omejilo - + Drag Point Vleci točko - + Drag Curve Vleci krivuljo - + Drag Constraint Vleci omejilo - + Modify sketch constraints Spremeni očrtno omejilo @@ -2227,6 +2227,11 @@ neveljavna omejila, izrojene geometrije, ... Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2331,16 +2336,16 @@ neveljavna omejila, izrojene geometrije, ... Vozla ni mogoče vstaviti izven razpona določilke B-zlepka. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ neveljavna omejila, izrojene geometrije, ... Ne pripnite - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ neveljavna omejila, izrojene geometrije, ... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Napačna izbira @@ -2631,8 +2635,8 @@ neveljavna omejila, izrojene geometrije, ... - - + + Double constraint Dvojna omejitev @@ -2648,8 +2652,8 @@ neveljavna omejila, izrojene geometrije, ... - - + + The selected edge already has a Block constraint! Izbran rob je že zbirno omejen! @@ -2661,7 +2665,7 @@ neveljavna omejila, izrojene geometrije, ... - + Select vertices from the sketch. Izberite oglišča z očrta. @@ -2686,29 +2690,29 @@ neveljavna omejila, izrojene geometrije, ... Zbirnega omejila ni mogoče dodati, če očrt ni rešen ali ima čezmerna in nasprotujoča si omejila. - + Select one edge from the sketch. Izberite en rob na očrtu. - + Select only edges from the sketch. Izberite le robove z očrta. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Niso izbrani 3 predmeti + - Error Napaka @@ -2723,75 +2727,75 @@ neveljavna omejila, izrojene geometrije, ... The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Namesto tega je bila uporabljena tangentnost med končnima točkama. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Izberite dve ali več oglišč na očrtu za sovpadno omejilo ali dva kroga, loka, eliptična loka ali dve elipsi za sosrediščno omejilo. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Izberite na očrtu dve oglišči za sovpadno omejilo ali dva kroga, loka, eliptična loka ali dve elipsi za sosrediščno omejilo. - + Select exactly one line or one point and one line or two points from the sketch. Izberite natanko eno črto ali točko in eno črto ali dve točki na skici. - + Cannot add a length constraint on an axis! Omejitve dolžine ni mogoče dodati na os! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Izberite na očrtu natanko eno črto ali točko in eno črto ali dve točki ali pa dva kroga. - + This constraint does not make sense for non-linear curves. To omejilo ni smiselno za nepreme krivulje. - + Endpoint to edge tangency was applied instead. Namesto tega je bila uporabljena dotikalnost iz krajišča na rob. - - - - - - + + + + + + Select the right things from the sketch. Izberite prave stvari na skici. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Izberite rob, ki ni utež B-zlepka. @@ -2801,93 +2805,92 @@ neveljavna omejila, izrojene geometrije, ... One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Nobena od izbranih točk ni bila omejena na ustrezne krivulje, ker so bodisi del istega predmeta, bodisi so oboji zunanje geometrije, ali pa rob ni izberljiv. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nobena od izbranih točk ni bila omejena na ustrezno krivuljo, ker ali so del istega elementa ali sta obe zunanji geometriji. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Izberite v očrtu natanko eno daljico ali največ dve točki. - + Cannot add a horizontal length constraint on an axis! Omejitve vodoravne dolžine ni mogoče dodati na os! - + Cannot add a fixed x-coordinate constraint on the origin point! Omejila z nespremenljivo sorednico x ni mogoče dodati na izhodiščno točko! - - + + This constraint only makes sense on a line segment or a pair of points. To omejilo je smiselno le za raven odsek ali par točk. - + Cannot add a vertical length constraint on an axis! Omejitve navpične dolžine ni mogoče dodati na os! - + Cannot add a fixed y-coordinate constraint on the origin point! Omejila z nespremenljivo sorednico y ni mogoče dodati na izhodiščno točko! - + Select two or more lines from the sketch. Izberite v očrtu dve daljici ali več. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Izberite v očrtu vsaj dve daljici. - - Select a valid line. - Izberite veljavno črto. - - - - + The selected edge is not a valid line. Izbrani rob ni veljavna črta. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni točki, dve krivulji in točka. - + Select some geometry from the sketch. perpendicular constraint Izberite v očrtu neko geometrijo. - - + + Cannot add a perpendicularity constraint at an unconnected point! Pravokotne omejitve ni mogoče dodati na nepovezano točko! - - + + One of the selected edges should be a line. En od izbranih robov mora biti črta. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uporabljena je bla dotikalnost med krajiščema. Omejilo sovpadanja je bilo izbrisano. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Uporabljena je bila dotikalnost med krajiščem in robom. Omejitev točke na predmet je bila izbrisana. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni točki, dve krivulji in točka. - + Select some geometry from the sketch. tangent constraint Izberite v očrtu neko geometrijo. - - - + + + Cannot add a tangency constraint at an unconnected point! Tangentne omejitve ni mogoče dodati na nepovezano točko! - - + + Tangent constraint at B-spline knot is only supported with lines! Dotikalno omejilo v vozlu B-zlepka je podprto le za daljice! - + B-spline knot to endpoint tangency was applied instead. Namesto tega je bila uporabljena dotikalnost vozla B-zlepka na krajišče. - - + + Wrong number of selected objects! Napačno število izbranih objektov! - - + + With 3 objects, there must be 2 curves and 1 point. Pri 3-h objektih morata obstajati 2 krivulji in 1 točka. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Izberite v očrtu enega ali več lokov oz. krogov. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Izberite bodisi enega ali več tečajev B-zlepka, bodisi enega ali več lokov ali krogov skice, toda ne mešano. - - - + + + Constraint only applies to arcs or circles. Omejitev velja samo za loke ali krožnice. - - + + Select one or two lines from the sketch. Or select two edges and a point. Izberite v očrtu bodisi eno ali dve daljici, bodisi dva robova in točko. @@ -3010,88 +3013,88 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Kotnega omejila ni mogoče nastaviti za dve vzporedni črti. - + Cannot add an angle constraint on an axis! Kotne omejitve ni mogoče dodati na os! - + Select two edges from the sketch. Izberite v očrtu dva robova. - + Select two or more compatible edges. Izberite dva ali več primernih robov. - + Sketch axes cannot be used in equality constraints. Osi očrta ni mogoče uporabiti z enakostnimi omejili. - + Equality for B-spline edge currently unsupported. Enakost za B-zlepek rob je trenutno nepodprta. - - - + + + Select two or more edges of similar type. Izberite dva ali več robov podobne vrste. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Izberite dve točki in somernico, dve točki in točko somernosti ali črto in točko somernosti na očrtu. - - + + Cannot add a symmetry constraint between a line and its end points. Somernostnega omejila ni mogoče dati med črto in njenima krajiščema. - - + + Cannot add a symmetry constraint between a line and its end points! Omejitve somernosti ni mogoče dodati med črto in njenima krajiščema! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Izberite dve krajišči daljic, ki naj predstavljata žarka, in rob, ki naj predstavlja mejo. Prva izbrana točka ustreza kazalu n1, druga kazalu n2 in sklicna vrednost nastavi razmerje n2/n1. - + Selected objects are not just geometry from one sketch. Izbrani predmeti niso le geometrija v očrtu. - + Cannot create constraint with external geometry only. Omejila ni mogoče ustvariti le z zunanjimi geometrijami. - + Incompatible geometry is selected. Izbrana je nezdružljiva geometrija. + - - - - + + + Select constraints from the sketch. Izberite omejila v očrtu. @@ -3113,9 +3116,9 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Določite stopnjo B-zlepka, ki naj bo med 1 in %1: - + CAD Kernel Error Napaka CAD Jedra @@ -3191,69 +3194,69 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Izbrani bi morali biti dve krajišči ali sovpadna točka. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Izberite prvine le iz enega očrta. - + No constraint selected Nobena omejitev ni izbrana - + At least one constraint must be selected Izbrati morate vsaj eno omejitev - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Vzpostavitev somernosti zahteva vsaj dve geometrijski prvini, pri čemer je zadnja geometrijskim prvina osnova za somerno konstrukcijo. - + The last element must be a point or a line serving as reference for the symmetry construction. Zadnja prvina mora biti točka ali daljica, ki služi kot osnova za vzpostavitev somernosti. - - + + A copy requires at least one selected non-external geometric element Za kopijo mora biti izbrana vsaj ena nezunanja geometrijska prvina - + Delete All Geometry Izbriši Vso Geometrijo - + Are you really sure you want to delete all geometry and constraints? Ali ste prepričani, da želite izbrisati celo geometrijo in omejila? - + Delete All Constraints Izbriši Vse Omejitve - + Are you really sure you want to delete all the constraints? Ali ste prepričani, da želite izbrisati vsa omejila? - + Removal of axes alignment requires at least one selected non-external geometric element Za ukinitev poravnave z osmi mora biti izbrana vsaj ena nezunanja geometrijska prvina @@ -3334,6 +3337,11 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3645,12 +3653,12 @@ Zaustavljati, Zapirati (pot), Zastirati (svetlobo, pogled) Dolžina: - + Refractive index ratio Lomni količnik - + Ratio n2/n1: Razmerje n2/n1: @@ -4065,13 +4073,13 @@ da se spremembe izvirnih predmetov neposredno odrazijo v kopijah SketcherGui::SketcherRegularPolygonDialog - Create array - Ustvari razpostavitev + Create regular polygon + Ustvari preprosti mnogokotnik - Number of Sides: - Število Stranic: + Number of sides: + Number of sides: @@ -5073,112 +5081,112 @@ Izvede se s pregledom geometrij in omejil očrta. SketcherGui::ViewProviderSketch - + Edit sketch Uredi očrt - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Neveljaven očrt - + Do you want to open the sketch validation tool? Ali želite odprti orodje za preverjanje veljavnosti očrta? - + The sketch is invalid and cannot be edited. Očrt je neveljaven in ga ni mogoče urejati. - + Please remove the following constraint: Odstranite naslednjo omejilo: - + Please remove at least one of the following constraints: Odstranite vsaj eno od naslednjih omejil: - + Please remove the following redundant constraint: Odstranite naslednje čezmerno omejilo: - + Please remove the following redundant constraints: Odstranite naslednja čezmerna omejila: - + The following constraint is partially redundant: Naslednje omejilo je deloma čezmerno: - + The following constraints are partially redundant: Naslednja omejila so deloma čezmerna: - + Please remove the following malformed constraint: Odstranite naslednje narobe oblikovano omejilo: - + Please remove the following malformed constraints: Odstranite naslednja narobe oblikovana omejila: - + Empty sketch Prazen očrt - + Over-constrained: Preomejeno: - + Malformed constraints: Narobe oblikovana omejila: - + Redundant constraints: Čezmerna omejila: - + Partially redundant: Delno čezmerno: - + Solver failed to converge Reševalniku je zbliževanje spodletelo - + Under constrained: Podomejeno: - + %n DoF(s) %n prostostna stopnja @@ -5188,7 +5196,7 @@ Izvede se s pregledom geometrij in omejil očrta. - + Fully constrained Polnoomejen @@ -5259,8 +5267,8 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Ustvari klon geometrije glede na zadnjo izbrano točko @@ -5268,17 +5276,17 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_CompCopy - + Clone Kloniraj - + Copy Kopiraj - + Move Premakni @@ -5286,8 +5294,8 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Določi premer krožnice ali krožnega loka @@ -5295,8 +5303,8 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Določi polmer oz. premer loka oz. kroga @@ -5304,8 +5312,8 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Določi polmer kroga ali loka @@ -5313,8 +5321,8 @@ Izvede se s pregledom geometrij in omejil očrta. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Ustvari preprosto kopijo geometrije glede na zadnjo izbrano točko @@ -5600,8 +5608,8 @@ Izberi način pripenjanja tega očrta na izbrane predmete. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Premakne geometrijo glede na zadnjo izbrano točko @@ -5926,7 +5934,7 @@ Eigen Sparse QR algoritem je optimiziran za redke razpredelnice; običajno hitre ViewProviderSketch - + and %1 more in še %1 @@ -6156,64 +6164,65 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Napaka - + Failed to delete all geometry Brisanje vseh geometrij je spodletelo - + Failed to delete all constraints Brisanje vseh omejil je spodletelo - - + + Invalid selection Neveljavna izbira - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6223,18 +6232,18 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Omejilo ima neveljavno informacijo kazala in je narobe oblikovano. - - - - - - - + + + + + + + Invalid Constraint Neveljavno omejilo @@ -6274,8 +6283,8 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Napaka pri ustvarjanju B-zlepkovega tečaja - + Error creating B-spline Napaka pri ustvarjanju B-zlepka @@ -6331,16 +6340,17 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Dodajanje daljice spodletelo - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6375,9 +6385,9 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Prirezovanje roba spodletelo + - Value Error Napaka vrednosti @@ -6431,6 +6441,11 @@ Medčrtna razdalja se spremeni, če postane manjša od tega števila slikovnih t Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6630,12 +6645,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Omeji polmer - + Fix the radius of a circle or an arc Določi polmer kroga ali loka @@ -6752,12 +6767,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6890,12 +6905,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Omeji sovpadanje - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6903,12 +6918,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7225,12 +7240,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7238,12 +7253,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7251,12 +7266,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7264,14 +7279,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts index bb4637cf81..b07f2c6fd2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr-CS.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Pravi klona geometrije uzimajući kao referentnu poslednju izabranu tačku @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Ograničenje kružnog luka ili kruga - + Constrain an arc or a circle Kotiraj kružni luk ili krug - + Constrain radius Ograničenje poluprečnika - + Constrain diameter Ograničenje prečnika - + Constrain auto radius/diameter Automatsko ograničenje poluprečnika i prečnika @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Pravi klona geometrije uzimajući kao referentnu poslednju izabranu tačku @@ -388,14 +388,14 @@ CmdSketcherConstrainAngle - + Constrain angle Ograničenje ugla - + Fix the angle of a line or the angle between two lines - Kotiraj ugao linije ili ugao između dve linije + Kotiraj ugao duži ili ugao između dve duži @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Ograničenje podudarnosti - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Napravi ograničenje podudarnosti između tačaka, ili koncentrično ograničenje između krugova, lukova i elipsa @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Ograničenje prečnika - + Fix the diameter of a circle or an arc Kotiraj prečnik kruga ili luka @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Ograničenje rastojanja - + Fix a length of a line or the distance between a line and a vertex or between two circles Kotiraj dužinu linije, rastojanje između linije i temena ili rastojanje između dva kruga @@ -453,40 +453,40 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Ograničenje horizontalnog rastojanja - + Fix the horizontal distance between two points or line ends - Kotiraj horizontalno rastojanje između dve tačke ili krajeva linija + Kotiraj horizontalno rastojanje između dve tačke ili dve krajnje tačke CmdSketcherConstrainDistanceY - + Constrain vertical distance Ograničenje vertikalnog rastojanja - + Fix the vertical distance between two points or line ends - Kotiraj vertikalno rastojanje između dve tačke ili krajeva linija + Kotiraj vertikalno rastojanje između dve tačke ili dve krajnje tačke CmdSketcherConstrainEqual - + Constrain equal Ograničenje jednakosti - + Create an equality constraint between two lines or between circles and arcs - Napravi ograničenje jednakosti između dve linije ili između krugova i lukova + Napravi ograničenje jednakosti između dve duži ili između krugova i lukova @@ -519,25 +519,25 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Ograničenje paralelnosti - + Create a parallel constraint between two lines - Napravi ograničenje paralelnosti između dve linije + Napravi ograničenje paralelnosti između dve duži CmdSketcherConstrainPerpendicular - + Constrain perpendicular Ograničenje upravnosti - + Create a perpendicular constraint between two lines Napravi ograničenje upravnosti između dva geometrijska elementa @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Ograničenje tačka na objektu - + Fix a point onto an object Ograničenje tačke da bude vezana za objekat @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Automatsko ograničenje poluprečnika i prečnika - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Kotiraj prečnik ako izabereš krug ili poluprečnik ako izabereš luk ili pol splajna @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Ograničenje refrakcije (Snellov zakon) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Napravi ograničenje refrakcije (Snellov zakon) između dve krajnje tačke zraka @@ -586,12 +586,12 @@ i neke ivice koja predstavlja granicu. CmdSketcherConstrainSymmetric - + Constrain symmetrical Ograničenje simetričnosti - + Create a symmetry constraint between two points with respect to a line or a third point Napravi ograničenje simetričnosti između dve tačke @@ -601,12 +601,12 @@ u odnosu na pravu ili treću tačku CmdSketcherConstrainTangent - + Constrain tangent Ograničenje tangentnosti - + Create a tangent constraint between two entities Napravi tangentno ograničenje između dva entiteta @@ -640,12 +640,12 @@ u odnosu na pravu ili treću tačku CmdSketcherCopy - + Copy Kopiraj - + Creates a simple copy of the geometry taking as reference the last selected point Pravi jednostavnu kopiju geometrije uzimajući kao referentnu poslednju izabranu tačku @@ -824,12 +824,12 @@ u odnosu na pravu ili treću tačku Create line - Napravi liniju + Napravi duž Create a line in the sketch - Napravi liniju na skici + Napravi duž na skici @@ -1030,12 +1030,12 @@ u odnosu na pravu ili treću tačku CmdSketcherDeleteAllConstraints - + Delete all constraints Obriši sva ograničenja - + Delete all constraints in the sketch Obriši sva ograničenja na skici @@ -1043,12 +1043,12 @@ u odnosu na pravu ili treću tačku CmdSketcherDeleteAllGeometry - + Delete all geometry Obriši svu geometriju - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Osim spoljašnje geometrije, obriši svu geometriju i ograničenja u trenutno aktivnoj skici @@ -1231,12 +1231,12 @@ koristeći koordinatni početak ili ose X i Y kao referentne. CmdSketcherMove - + Move Pomeri - + Moves the geometry taking as reference the last selected point Premešta geomatriju u odnosu na zadnju izabranu tačku @@ -1257,12 +1257,12 @@ koristeći koordinatni početak ili ose X i Y kao referentne. CmdSketcherRectangularArray - + Rectangular array Pravougaono umnožavanje - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Pravi pravougaono umnožavanje u odnosu na zadnju izabranu tačku @@ -1270,12 +1270,12 @@ koristeći koordinatni početak ili ose X i Y kao referentne. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Ukloni poravnanje osa - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifikuje ograničenja kako bi se uklonilo poravnanje osa s tim da pokušava zadržati postojeća ograničenja @@ -1298,12 +1298,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Prikaži/sakrij unutrašnju geometriju - + Show all internal geometry or hide unused internal geometry Prikaži svu unutrašnju geometriju ili sakrij neiskorišćenu unutrašnju geometriju @@ -1311,8 +1311,8 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Izaberi sukobljena ograničenja @@ -1320,12 +1320,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectConstraints - + Select associated constraints Izaberi povezana ograničenja - + Select the constraints associated with the selected geometrical elements Izaberi ograničenja povezana sa izabranim geometrijskim elementima @@ -1333,12 +1333,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Izaberi povezanu geometriju - + Select the geometrical elements associated with the selected constraints Izaberi geometrijske elemente povezane sa izabranim ograničenjima @@ -1346,12 +1346,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Izaberi geometriju koja ima stepene slobode - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Izaberi geometrijske elemente kod kojih solver još uvek detektuje neograničene stepene slobode. @@ -1359,12 +1359,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Izaberi horizontalnu osu - + Select the local horizontal axis of the sketch Izaberi lokalnu horizontalnu osu skice @@ -1372,8 +1372,8 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Izaberi deformisana ograničenja @@ -1381,12 +1381,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectOrigin - + Select origin Izaberi koordinatni početak - + Select the local origin point of the sketch Izaberi lokalni koordinatni početak skice @@ -1394,8 +1394,8 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Izaberi delimično suvišna ograničenja @@ -1403,8 +1403,8 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Izaberi suvišna ograničenja @@ -1412,12 +1412,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSelectVerticalAxis - + Select vertical axis Izaberi vertikalnu osu - + Select the local vertical axis of the sketch Izaberi lokalnu vertikalnu osu skice @@ -1464,25 +1464,25 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherSymmetry - + Symmetry Simetričnost - + Creates symmetric geometry with respect to the last selected line or point - Pravi simetričnu geometriju u odnosu na poslednju izabranu liniju ili tačku + Pravi simetričnu geometriju u odnosu na poslednju izabranu duž ili tačku CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Aktiviraj/deaktiviraj ograničenje - + Activates or deactivates the selected constraints Aktivira ili deaktivira izabrana ograničenja @@ -1503,12 +1503,12 @@ Ovo će obrisati osobinu 'Osnova', ako postoji. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Ograničavajuće/referentne kote - + Set the toolbar, or the selected constraints, into driving or reference mode Podesite paletu sa alatkama ili izabrana ograničenja, @@ -1597,54 +1597,54 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Add fixed constraint - + Add 'Block' constraint Dodaj ograničenje blokiranjem - + Add block constraint Dodaj ograničenje blokiranjem - - + + Add coincident constraint Dodaj ograničenje podudarnosti - - + + Add distance from horizontal axis constraint Dodaj kotu rastojanja od horizontalne ose - - + + Add distance from vertical axis constraint Dodaj kotu rastojanja od vertikalne ose - - + + Add point to point distance constraint Dodaj kotu vertikalnog rastojanja od tačke do tačke - - + + Add point to line Distance constraint Dodaj kotu rastojanja od tačke do linije - - + + Add circle to circle distance constraint Dodaj ograničenje između dva kruga - + Add circle to line distance constraint Dodaj ograničenje rastojanja od kruga do linije @@ -1653,8 +1653,8 @@ nevažeća ograničenja, degenerisanu geometriju, itd. - - + + Add length constraint Dodaj ograničenje dužine @@ -1776,159 +1776,159 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Dodaj ograničenje rastojanje Y - + Add point to circle Distance constraint Dodaj ograničenje rastojanja od tačke do kružnice - - + + Add point on object constraint Dodaj tačku na ograničenje objekta - - + + Add point to point horizontal distance constraint Dodaj ograničenje horizontalnog rastojanja od tačke do tačke - + Add fixed x-coordinate constraint Dodaj ograničenje fiksne x-koordinate - - + + Add point to point vertical distance constraint Dodaj ograničenje vertikalnog rastojanja od tačke do tačke - + Add fixed y-coordinate constraint Dodaj ograničenje fiksne y-koordinate - - + + Add parallel constraint Dodaj ograničenje paralelnosti - - - - - - - + + + + + + + Add perpendicular constraint Dodaj ograničenje upravnosti - + Add perpendicularity constraint Dodaj ograničenje upravnosti - + Swap coincident+tangency with ptp tangency Zameni podudarnost+tangentnost na tangentnost tačaka - + Swap PointOnObject+tangency with point to curve tangency Zameni tačka na objektu+tangentnost sa tangentnost tačke na krivu - - - - - - - + + + + + + + Add tangent constraint Dodaj ograničenje tangentnosti - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Dodaj tačku ograničenja tangentnosti - - - - + + + + Add radius constraint Dodaj ograničenje poluprečnika - - - - + + + + Add diameter constraint Dodaj ograničenje prečnika - - - - + + + + Add radiam constraint Dodaj ograničenje poluprečnik-prečnik - - - - + + + + Add angle constraint Dodaj ograničenje ugla - - + + Add equality constraint Dodaj ograničenje jednakosti - - - - - + + + + + Add symmetric constraint Dodaj ograničenje simetričnosti - + Add Snell's law constraint Dodaj ograničenje na osnovu Snellovog zakona - + Toggle constraint to driving/reference Prebaci između referentnog i ograničavajućeg režima kota - + Activate/Deactivate constraint Aktiviraj/deaktiviraj ograničenje @@ -1975,7 +1975,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Add sketch line - Dodaj skicu linije + Dodaj duž @@ -1985,7 +1985,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Add line to sketch wire - Dodaj liniju žičanoj skici + Dodaj duž žici @@ -2099,47 +2099,47 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Spoji krive - + Cut in Sketcher - Cut in Sketcher + Iseci iz Sketcher-a - + Paste in Sketcher - Paste in Sketcher + Nalepi u Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Napravi simetričnu geometriju - + Copy/clone/move geometry Kopiraj/kloniraj/premesti geometriju - + Create copy of geometry Napravi kopiju geometrije - + Delete all geometry Obriši svu geometriju - + Delete All Constraints Izbriši sva ograničavanja - + Remove Axes Alignment Ukloni poravnanje osa @@ -2157,8 +2157,8 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Ažuriraj virtuelni prostor ograničenja - + Add auto constraints Dodaj automatska ograničenja @@ -2173,22 +2173,22 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Preimenuj ograničenja skice - + Drag Point Prevuci tačku - + Drag Curve Prevuci krivu - + Drag Constraint Prevuci ograničenje - + Modify sketch constraints Izmeni ograničenja skice @@ -2225,7 +2225,12 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Scale geometries - Scale geometries + Skaliraj geometriju + + + + Translate geometries + Translate geometries @@ -2331,16 +2336,16 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Čvor se ne može umetnuti izvan opsega parametara B-Splajna. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Nemoj prikačiti - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ nevažeća ograničenja, degenerisanu geometriju, itd. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Pogrešan izbor @@ -2631,8 +2635,8 @@ nevažeća ograničenja, degenerisanu geometriju, itd. - - + + Double constraint Duplo ograničenje @@ -2648,8 +2652,8 @@ nevažeća ograničenja, degenerisanu geometriju, itd. - - + + The selected edge already has a Block constraint! Izabrana ivica je već ograničena blokiranjem! @@ -2661,7 +2665,7 @@ nevažeća ograničenja, degenerisanu geometriju, itd. - + Select vertices from the sketch. Izaberi temena sa skice. @@ -2686,29 +2690,29 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Ograničenje blokiranjem se ne može dodati ako je skica nerešena ili postoje suvišna i konfliktna ograničenja. - + Select one edge from the sketch. Izaberi jednu ivicu sa skice. - + Select only edges from the sketch. Izaberi samo ivice sa skice. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Broj izabranih objekata nije 3 + - Error Greška @@ -2723,75 +2727,75 @@ nevažeća ograničenja, degenerisanu geometriju, itd. Na izabranu geometriju se ne može primeniti ograničenje horizontalnosti ili vertikalnosti! - + Endpoint to endpoint tangency was applied instead. Umesto toga je primenjena tangentnost u krajnjim tačkama. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Izaberi dva ili više temena sa skice za ograničenje podudarnosti, ili dva ili više krugova, elipsa, lukova ili lukova elipse za ograničenje koncentričnosti. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Izaberi dva temena sa skice za ograničenje podudarnosti, ili dva kruga, elipse, lukove ili lukove elipse za ograničenje koncentričnosti. - + Select exactly one line or one point and one line or two points from the sketch. Izaberi tačno jednu liniju ili jednu tačku i jednu liniju, ili dve tačke sa skice. - + Cannot add a length constraint on an axis! Nije moguće kotirati osu ravni! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Izaberi tačno jednu liniju, jednu tačku i jednu liniju, dve tačke ili dva kruga na skici. - + This constraint does not make sense for non-linear curves. Ovo ograničenje nema smisla za nelinearne krive. - + Endpoint to edge tangency was applied instead. Umesto toga je primenjena tangentnost ivice u krajnjoj tački. - - - - - - + + + + + + Select the right things from the sketch. Izaberi prave stvari sa skice. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Izaberi ivicu koja nije težina B-splajn kontrolne tačke. @@ -2801,93 +2805,92 @@ nevažeća ograničenja, degenerisanu geometriju, itd. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Za Ograničenje koncentričnosti izaberi nekoliko tačaka ili nekoliko kružnica, lukova ili elipsa. - + Select either one point and several curves, or one curve and several points Izaberi ili jednu tačku i nekoliko krivih, ili jednu krivu i nekoliko tačaka - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Izaberi jednu tačku i nekoliko krivih ili jednu krivu i nekoliko tačaka za Ograničenje tačka na objektu, nekoliko tačaka za Ograničenje podudarnosti ili nekoliko kružnica, lukova ili elipsa za Ograničenje koncentričnosti. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Nijedna od izabranih tačaka nije bila ograničena na dotične krive, jer su delovi istog elementa, jer su obe spoljašnje geometrije ili zato što ivica nije prihvatljiva. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Nijedna od izabranih tačaka nije bila ograničena na odgovarajuće krive, bilo zato što su delovi istog elementa, ili zato što su obe spoljašnje geometrije. - + Cannot add a length constraint on this selection! Nije moguće napraviti kotu za izabrani geometrijski element! - - - - + + + + Select exactly one line or up to two points from the sketch. Izaberi tačno jednu liniju ili najviše dve tačke sa skice. - + Cannot add a horizontal length constraint on an axis! Nije moguće napraviti horizotalnu kotu na osi ravni! - + Cannot add a fixed x-coordinate constraint on the origin point! Nije moguće ograničiti x-koordinatu koordinatnog početka! - - + + This constraint only makes sense on a line segment or a pair of points. Ovo ograničenje ima smisla samo na segmentu linije ili paru tačaka. - + Cannot add a vertical length constraint on an axis! Nije moguće napraviti vertikalnu kotu na osi ravni! - + Cannot add a fixed y-coordinate constraint on the origin point! Nije moguće ograničiti y-koordinatu koordinatnog početka! - + Select two or more lines from the sketch. Izaberi dve ili više linija sa skice. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Izaberi najmanje dve linije sa skice. - - Select a valid line. - Izaberi važeću ivicu. - - - - + The selected edge is not a valid line. Izabrana ivica nije važeća linija. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvatljive kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; dve krive i tačka. - + Select some geometry from the sketch. perpendicular constraint Izaberi neku geometriju sa skice. - - + + Cannot add a perpendicularity constraint at an unconnected point! Ne može se dodati ograničenje upravnosti na tačku pošto ona nije krajnja tačka! - - + + One of the selected edges should be a line. Jedna od izabranih ivica bi trebala biti linija. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Primenjena je tangentnost na krajnje tačke. Ograničenje podudarnosti je izbrisano. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Primenjena je tangentnost između krajnje tačke i ivice. Ograničenje tačka na objektu je obrisano. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; dve krive i tačka. - + Select some geometry from the sketch. tangent constraint Izaberi neku geometriju sa skice. - - - + + + Cannot add a tangency constraint at an unconnected point! Ne može se dodati ograničenje tangentnosti u tačkama koje se ne poklapaju! - - + + Tangent constraint at B-spline knot is only supported with lines! Ograničenje tangentnosti se može primeniti na čvor B-splajna samo ako je u pitanju linija! - + B-spline knot to endpoint tangency was applied instead. Umesto toga je primenjena tangentnost između čvora B-splajna i krajnje tačke. - - + + Wrong number of selected objects! Pogrešan broj izabranih objekata! - - + + With 3 objects, there must be 2 curves and 1 point. Kod 3 objekta, moraju postojati 2 krive i 1 tačka. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Izaberi jedan ili više lukova ili krugova sa skice. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Izaberi samo jedan ili više polova B-splajn krive ili samo jedan ili više lukova ili krugova sa skice, ali ne pomešano. - - - + + + Constraint only applies to arcs or circles. Ograničenje se odnosi samo na lukove i kružnice. - - + + Select one or two lines from the sketch. Or select two edges and a point. Izaberi jednu ili dve linije sa skice, ili izaberi dve ivice i tačku. @@ -3010,88 +3013,88 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Za dve paralelne prave ne može se postaviti ograničenje ugla. - + Cannot add an angle constraint on an axis! Ne možete dodati ograničenje ugla na osu! - + Select two edges from the sketch. Izaberi dve ivice sa skice. - + Select two or more compatible edges. Izaberi dve ili više kompatibilnih ivica. - + Sketch axes cannot be used in equality constraints. Na ose skice se ne može primeniti ograničenje jednakosti. - + Equality for B-spline edge currently unsupported. Primena ograničenja jednakosti na B-splajn krivu trenutno nije podržana. - - - + + + Select two or more edges of similar type. Izaberi dve ili više ivica sličnog tipa. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Izaberi dve tačke i liniju simetrije, dve tačke i tačku simetrije ili pravu i tačku simetrije sa skice. - - + + Cannot add a symmetry constraint between a line and its end points. Nije moguće dodati ograničenje simetričnosti između linije i njenih krajnjih tačaka. - - + + Cannot add a symmetry constraint between a line and its end points! Nije moguće dodati ograničenje simetričnosti između linije i njenih krajnjih tačaka! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Izaberi dve krajnje tačke linija koje će delovati kao zraci i ivicu koja predstavlja granicu. Prva izabrana tačka odgovara indeksu loma n1, druga n2, a odnos n2/n1 je relativni indeks loma. - + Selected objects are not just geometry from one sketch. Izabrani objekti nisu samo geometrija iz jedne skice. - + Cannot create constraint with external geometry only. Nije moguće kreirati ograničenje samo sa spoljnom geometrijom. - + Incompatible geometry is selected. Izabrana je nekompatibilna geometrija. + - - - - + + + Select constraints from the sketch. Izaberi ograničenja sa skice. @@ -3113,9 +3116,9 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Podesi stepen B-splajn krive, između 1 i %1: - + CAD Kernel Error Greška CAD jezgra @@ -3191,69 +3194,69 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Treba izabrati dve krajnje tačke ili podudarnu tačku. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Izaberi elemente iz jedne skice. - + No constraint selected Nijedno ograničenje nije izabrano - + At least one constraint must be selected Najmanje jedno ograničenje mora biti izabrano - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Simetrična konstrukcija zahteva najmanje dva geometrijska elementa, poslednji geometrijski element je referentni za građenje simetrije. - + The last element must be a point or a line serving as reference for the symmetry construction. Poslednji element mora biti tačka ili prava i referentni je za građenje simetrije. - - + + A copy requires at least one selected non-external geometric element Kopija zahteva najmanje jedan izabrani geometrijski element koji nije spoljni - + Delete All Geometry Obriši svu geometriju - + Are you really sure you want to delete all geometry and constraints? Da li si zaista siguran da želiš da obrišeš svu geometriju i ograničenja? - + Delete All Constraints Izbriši sva ograničavanja - + Are you really sure you want to delete all the constraints? Da li si zaista siguran da želiš da obrišeš svu geometriju i ograničenja? - + Removal of axes alignment requires at least one selected non-external geometric element Da bi ste mogli uklonoto ose poravnanja potrebno je imati izabran najmanje jedan geometrijski element koji nije spoljnji @@ -3287,7 +3290,7 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Line parameters - Parametri linije + Parametri duži @@ -3332,7 +3335,12 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Scale parameters - Scale parameters + Parametri skaliranja + + + + Translate parameters + Translate parameters @@ -3644,12 +3652,12 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Dužina: - + Refractive index ratio Relativni indeks loma - + Ratio n2/n1: Odnos n2/n1: @@ -3689,7 +3697,7 @@ Prihvaćene kombinacije: dve krive; krajnja tačka i kriva; dve krajnje tačke; Line - Linija + Duž @@ -4065,13 +4073,13 @@ direktno ogledati i na kopijama SketcherGui::SketcherRegularPolygonDialog - Create array - Napravi pravougaono umnožavanje + Create regular polygon + Napravi pravilni mnogougao - Number of Sides: - Broj strana: + Number of sides: + Number of sides: @@ -4090,7 +4098,7 @@ direktno ogledati i na kopijama Task panel widgets - Task panel widgets + Element interfejsa Panel zadataka @@ -4174,7 +4182,7 @@ Potrebno je ponovo ući u režim uređivanja da bi stupio na snagu. Dimension constraint - Dimension constraint + Kota @@ -4183,11 +4191,11 @@ Potrebno je ponovo ući u režim uređivanja da bi stupio na snagu. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Izaberi vrstu alatki za kotiranje na traci sa alatkama: +'Zajednička alatka': Jedan alatka za sve vrste kotiranja: Rastojanje, Rastojanje X/Y, Ugao, Poluprečnik. (Ostale u padajućem meniju) +'Razdvojene alatke': Pojedinačne alatke za svaku vrstu kotiranja. +'Obe vrste alatki': Na traci sa alatkama će se nalaziti i zajednička i pojedinačne alatke za kotiranje. +Ovo podešavanje je samo za traku sa alatkama. Šta god bude izabrano, svi alati su uvek dostupni u meniju i pomoću prečica. @@ -4195,10 +4203,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Dok se koristi alatka za kotiranje, moguće je birati tretiranje krugova i lukova: +'Auto': Alatka će kotirati poluprečnik lukova i prečnik krugova. +'Prečnik': Alatka će kotirati prečnik lukova i krugova. +'Poluprečnik': Alatka će kotirati poluprečnik lukova i krugova. @@ -4787,7 +4795,7 @@ Međutim, nisu pronađena nikakva ograničenja vezana za krajnje tačke. Line - Linija + Duž @@ -5075,112 +5083,112 @@ Ovo se radi analizom geometrije i ograničenja skice. SketcherGui::ViewProviderSketch - + Edit sketch Uredi skicu - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Neispravna skica - + Do you want to open the sketch validation tool? Da li želiš da otvoriš alatku za proveru skice? - + The sketch is invalid and cannot be edited. Skica sadrži greške i ne može biti menjana. - + Please remove the following constraint: Ukloni sledeće ograničenje: - + Please remove at least one of the following constraints: Ukloni bar jedno od sledećih ograničenja: - + Please remove the following redundant constraint: Ukloni sledeće suvišno ograničenje: - + Please remove the following redundant constraints: Ukloni sledeća suvišna ograničenja: - + The following constraint is partially redundant: Sledeće ograničenje je suvišno: - + The following constraints are partially redundant: Sledeća ograničenja su suvišna: - + Please remove the following malformed constraint: Ukloni sledeće oštećeno ograničenje: - + Please remove the following malformed constraints: Ukloni sledeće oštećena ograničenja: - + Empty sketch Prazna skica - + Over-constrained: Previše ograničeno: - + Malformed constraints: Oštećena ograničenja: - + Redundant constraints: Suvišna ograničenja: - + Partially redundant: Delimično suvišna: - + Solver failed to converge Solver nije uspeo da se približi - + Under constrained: Nedovoljno ograničena: - + %n DoF(s) %n Stepeni slobode @@ -5189,7 +5197,7 @@ Ovo se radi analizom geometrije i ograničenja skice. - + Fully constrained Potpuno ograničena @@ -5260,8 +5268,8 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Pravi klona geometrije uzimajući kao referentnu poslednju izabranu tačku @@ -5269,17 +5277,17 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_CompCopy - + Clone Klon - + Copy Kopiraj - + Move Pomeri @@ -5287,8 +5295,8 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Kotiraj prečnik kruga ili luka @@ -5296,8 +5304,8 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Kotiraj poluprečnik/prečnik krugova ili lukova @@ -5305,8 +5313,8 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Kotiraj poluprečnik kruga ili luka @@ -5314,8 +5322,8 @@ Ovo se radi analizom geometrije i ograničenja skice. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Pravi jednostavnu kopiju geometrije uzimajući kao referentnu poslednju izabranu tačku @@ -5601,8 +5609,8 @@ Izaberi metod za pridruživanje ove skice na izabrane objekte. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Premešta geomatriju u odnosu na zadnju izabranu tačku @@ -5927,7 +5935,7 @@ Eigen redak QR algoritam je optimizovan za retke matrice; obično brže ViewProviderSketch - + and %1 more i %1 više @@ -6157,64 +6165,65 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Greška - + Failed to delete all geometry Nije uspelo brisanje sve geometrije - + Failed to delete all constraints Nije uspelo brisanje svih ograničenja - - + + Invalid selection Neispravan izbor - + Selection has no valid geometries. Nije izabrana važeća geometrija. - + Selection has no valid geometries. BSplines, Points are not supported yet. Nije izabrana odgovarajuća geometrija. B-Splajnovi i tačke još nisu podržani. @@ -6224,18 +6233,18 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Ograničenje ima pogrešne indeksne informacije tako da je neispravno. - - - - - - - + + + + + + + Invalid Constraint Neispravno ograničenje @@ -6275,8 +6284,8 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Greška prilikom pravljenja pola B-Splajn krive - + Error creating B-spline Greška prilikom pravljenja B-Splajn krive @@ -6329,19 +6338,20 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Failed to add line - Dodavanje linije nije uspelo + Dodavanje duži nije uspelo - - - - - - - - + + + + + + + + + Tool execution aborted Izvršavanje alatke je prekinuto @@ -6376,9 +6386,9 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Opsecanje ivice nije uspelo + - Value Error Greška vrednosti @@ -6430,7 +6440,12 @@ Razmak mreže se menja ako postane manji od ovog broja piksela. Failed to scale - Failed to scale + Skaliranje nije uspelo + + + + Failed to translate + Failed to translate @@ -6620,7 +6635,7 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr Dimension - Kota + Kotiranje - Dimenziona ograničenja @@ -6631,12 +6646,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherConstrainRadius - + Constrain radius Ograničenje poluprečnika - + Fix the radius of a circle or an arc Kotiraj poluprečnik kruga ili luka @@ -6753,12 +6768,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherOffset - + Offset geometry Odmak - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Odmak izabrane geometrije. Pozitivna vrednost odmakne ka spolja, a negativna prema unutra. @@ -6833,7 +6848,7 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr Constrains a single line to either horizontal or vertical. - Ograniči liniju da bude horizontalna ili vertikalna. + Ograniči duž da bude horizontalna ili vertikalna. @@ -6846,7 +6861,7 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr Constrains a single line to either horizontal or vertical, whichever is closer to current alignment. - Ograniči liniju da bude horizontalna ili vertikalna. Izaberi ono stanje koje je bliže trenutnom položaju. + Ograniči duž da bude horizontalna ili vertikalna. Izaberi ono stanje koje je bliže trenutnom položaju. @@ -6891,12 +6906,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherConstrainCoincidentUnified - + Constrain coincident Ograničenja podudarnosti - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Napravi ograničenje podudarnosti između tačaka ili ograniči tačku za neki ivicu ili napravi ograničenje koncentričnosti između krugova, lukova i elipsa @@ -6904,12 +6919,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherRotate - + Polar transform Kružno umnožavanje - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotiraj i umnoži po kružnici izabranu geometriju, napravi n kopija. @@ -6929,7 +6944,7 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr Creating line - Pravljenje linije + Pravljenje duži @@ -6976,7 +6991,7 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr Pattern - Pattern + Umnožavanje @@ -7226,12 +7241,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7239,12 +7254,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7252,12 +7267,12 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7265,14 +7280,56 @@ Levi klik na prazan prostor potvrdiće trenutno ograničenje. Desni klik ili pr CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Kloniraj ograničenja + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts index 00c21f1eb5..96f342f80a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Клон - + Creates a clone of the geometry taking as reference the last selected point Прави клона геометрије узимајући као референтну последњу изабрану тачку @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Ограничење кружног лука или круга - + Constrain an arc or a circle Котирај кружни лук или круг - + Constrain radius Ограничење полупречника - + Constrain diameter Ограничење пречника - + Constrain auto radius/diameter Аутоматско ограничење полупречника и пречника @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Клон - + Creates a clone of the geometry taking as reference the last selected point Прави клона геометрије узимајући као референтну последњу изабрану тачку @@ -388,14 +388,14 @@ CmdSketcherConstrainAngle - + Constrain angle Ограничење угла - + Fix the angle of a line or the angle between two lines - Котирај угао линије или угао између две линије + Котирај угао дужи или угао између две дужи @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Ограничење подударности - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Направи ограничење подударности између тачака или концентрично ограничење између кругова, лукова и елипса @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Ограничење пречника - + Fix the diameter of a circle or an arc Котирај пречник круга или лука @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Ограничење растојања - + Fix a length of a line or the distance between a line and a vertex or between two circles Котирај дужину линије, растојање између линије и темена или растојање између два круга @@ -453,40 +453,40 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Ограничење хоризонталног растојања - + Fix the horizontal distance between two points or line ends - Котирај хоризонтално растојање између две тачке или крајева линија + Котирај хоризонтално растојање између две тачке или две крајње тачке CmdSketcherConstrainDistanceY - + Constrain vertical distance Ограничење вертикалног растојања - + Fix the vertical distance between two points or line ends - Котирај вертикално растојање између две тачке или крајева линија + Котирај вертикално растојање између две тачке или две крајње тачке CmdSketcherConstrainEqual - + Constrain equal Ограничење једнакости - + Create an equality constraint between two lines or between circles and arcs - Направи ограничење једнакости између две линије или између кругова и лукова + Направи ограничење једнакости између две дужи или између кругова и лукова @@ -519,25 +519,25 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Ограничење паралелности - + Create a parallel constraint between two lines - Направи ограничење паралелности између две линије + Направи ограничење паралелности између две дужи CmdSketcherConstrainPerpendicular - + Constrain perpendicular Ограничење управности - + Create a perpendicular constraint between two lines Направи ограничење управности између два геометријска елемента @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Ограничење тачка на објекту - + Fix a point onto an object Ограничење тачке да буде везана за објекат @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Аутоматско ограничење полупречника и пречника - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Котирај пречник ако изабереш круг или полупречник ако изабереш лук или пол сплајна @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Ограничење рефракције (Снеллов закон) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Направи ограничење рефракције (Снеллов закон) између две крајње тачке зрака @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Ограничење симетричности - + Create a symmetry constraint between two points with respect to a line or a third point Направи ограничење симетричности између две тачке @@ -601,12 +601,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Ограничење тангентности - + Create a tangent constraint between two entities Направи тангентно ограничење између два ентитета @@ -640,12 +640,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Копирај - + Creates a simple copy of the geometry taking as reference the last selected point Прави једноставну копију геометрије узимајући као референтну последњу изабрану тачку @@ -824,12 +824,12 @@ with respect to a line or a third point Create line - Направи линију + Направи дуж Create a line in the sketch - Направи линију на скици + Направи дуж на скици @@ -1030,12 +1030,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Обриши сва ограничења - + Delete all constraints in the sketch Обриши сва ограничења на скици @@ -1043,12 +1043,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Обриши сву геометрију - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Осим спољашње геометрије, обриши сву геометрију и ограничења у тренутно активној скици @@ -1231,12 +1231,12 @@ as mirroring reference. CmdSketcherMove - + Move Помери - + Moves the geometry taking as reference the last selected point Премешта геоматрију у односу на задњу изабрану тачку @@ -1257,12 +1257,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Правоугаоно умножавање - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Прави правоугаоно умножавање у односу на задњу изабрану тачку @@ -1270,12 +1270,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Уклони поравнање оса - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Модификује ограничења како би се уклонило поравнање оса с тим да покушава задржати постојећа ограничења @@ -1298,12 +1298,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Прикажи/cакриј унутрашњу геометрију - + Show all internal geometry or hide unused internal geometry Прикажи сву унутрашњу геометрију или сакриј неискоришћену унутрашњу геометрију @@ -1311,8 +1311,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Изабери сукобљена ограничења @@ -1320,12 +1320,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Изабери повезана ограничења - + Select the constraints associated with the selected geometrical elements Изабери ограничења повезана са изабраним геометријским елементима @@ -1333,12 +1333,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Изабери повезану геометрију - + Select the geometrical elements associated with the selected constraints Изабери геометријске елементе повезане са изабраним ограничењима @@ -1346,12 +1346,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Изабери геометрију која има степене слободе - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Изабери геометријске елементе код којих солвер још увек детектује неограничене степене слободе. @@ -1359,12 +1359,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Изабери хоризонталну осу - + Select the local horizontal axis of the sketch Изабери локалну хоризонталну осу скице @@ -1372,8 +1372,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Изабери деформисана ограничења @@ -1381,12 +1381,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Изабери координатни почетак - + Select the local origin point of the sketch Изабери локални координатни почетак скице @@ -1394,8 +1394,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Изабери делимично сувишна ограничења @@ -1403,8 +1403,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Изабери сувишна ограничења @@ -1412,12 +1412,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Изабери вертикалну осу - + Select the local vertical axis of the sketch Изабери локалну вертикалну осу скице @@ -1464,25 +1464,25 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Симетричност - + Creates symmetric geometry with respect to the last selected line or point - Прави симетричну геометрију у односу на последњу изабрану линију или тачку + Прави симетричну геометрију у односу на последњу изабрану дуж или тачку CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Активирај/деактивирај ограничење - + Activates or deactivates the selected constraints Активира или деактивира изабрана ограничења @@ -1503,12 +1503,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Ограничавајуће/референтне коте - + Set the toolbar, or the selected constraints, into driving or reference mode Подеси палету са алаткама или изабрана ограничења, @@ -1597,54 +1597,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Додај ограничење блокирањем - + Add block constraint Додај ограничење блокирањем - - + + Add coincident constraint Додај ограничење подударности - - + + Add distance from horizontal axis constraint Додај коту растојања од хоризонталне осе - - + + Add distance from vertical axis constraint Додај коту растојања од вертикалне осе - - + + Add point to point distance constraint Додај коту вертикалног растојања од тачке до тачке - - + + Add point to line Distance constraint Додај коту растојања од тачке до линије - - + + Add circle to circle distance constraint Додај ограничење између два круга - + Add circle to line distance constraint Додај ограничење растојања од круга до линије @@ -1653,8 +1653,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Додај ограничење дужине @@ -1776,159 +1776,159 @@ invalid constraints, degenerated geometry, etc. Додај ограничење растојање Y - + Add point to circle Distance constraint Додај ограничење растојања од тачке до кружнице - - + + Add point on object constraint Додај тачку на ограничење објекта - - + + Add point to point horizontal distance constraint Додај ограничење хоризонталног растојања од тачке до тачке - + Add fixed x-coordinate constraint Додај ограничење фиксне x-координате - - + + Add point to point vertical distance constraint Додај ограничење вертикалног растојања од тачке до тачке - + Add fixed y-coordinate constraint Додај ограничење фиксне y-координате - - + + Add parallel constraint Додај ограничење паралелности - - - - - - - + + + + + + + Add perpendicular constraint Додај ограничење управности - + Add perpendicularity constraint Додај ограничење управности - + Swap coincident+tangency with ptp tangency Замени подударност+тангентност на тангентност тачака - + Swap PointOnObject+tangency with point to curve tangency Замени тачка на објекту+тангентност са тангентност тачке на криву - - - - - - - + + + + + + + Add tangent constraint Додај ограничење тангентности - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Додај тачку ограничења тангентности - - - - + + + + Add radius constraint Додај ограничење полупречника - - - - + + + + Add diameter constraint Додај ограничење пречника - - - - + + + + Add radiam constraint Додај ограничење полупречник-пречник - - - - + + + + Add angle constraint Додај ограничење угла - - + + Add equality constraint Додај ограничење једнакости - - - - - + + + + + Add symmetric constraint Додај ограничење симетричности - + Add Snell's law constraint Додај ограничење на основу Снелловог закона - + Toggle constraint to driving/reference Пребаци између референтног и ограничавајућег режима кота - + Activate/Deactivate constraint Активирај/деактивирај ограничење @@ -1975,7 +1975,7 @@ invalid constraints, degenerated geometry, etc. Add sketch line - Додај скицу линије + Додај дуж @@ -1985,7 +1985,7 @@ invalid constraints, degenerated geometry, etc. Add line to sketch wire - Додај линију жичаној скици + Додај дуж жици @@ -2099,47 +2099,47 @@ invalid constraints, degenerated geometry, etc. Споји криве - + Cut in Sketcher - Cut in Sketcher + Исеци из Sketcher-а - + Paste in Sketcher - Paste in Sketcher + Налепи у Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Направи симетричну геометрију - + Copy/clone/move geometry Копирај/клонирај/премести геометрију - + Create copy of geometry Направи копију геометрије - + Delete all geometry Обриши сву геометрију - + Delete All Constraints Избриши сва ограничавања - + Remove Axes Alignment Уклони поравнање оса @@ -2157,8 +2157,8 @@ invalid constraints, degenerated geometry, etc. Ажурирај виртуелни простор ограничења - + Add auto constraints Додај аутоматска ограничења @@ -2173,22 +2173,22 @@ invalid constraints, degenerated geometry, etc. Преименуј ограничење скице - + Drag Point Превуци тачку - + Drag Curve Превуци криву - + Drag Constraint Превуци ограничење - + Modify sketch constraints Измени ограничења скице @@ -2225,7 +2225,12 @@ invalid constraints, degenerated geometry, etc. Scale geometries - Scale geometries + Скалирај геометрију + + + + Translate geometries + Translate geometries @@ -2331,16 +2336,16 @@ invalid constraints, degenerated geometry, etc. Чвор се не може уметнути изван опсега параметара Б-Сплајна. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2406,20 +2411,8 @@ invalid constraints, degenerated geometry, etc. Немој прикачити - - - - - - - - - - - - @@ -2430,133 +2423,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Погрешан избор @@ -2631,8 +2635,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Дупло ограничење @@ -2648,8 +2652,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Изабрана ивица је већ ограничена блокирањем! @@ -2661,7 +2665,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Изабери темена са скице. @@ -2686,29 +2690,29 @@ invalid constraints, degenerated geometry, etc. Ограничење блокирањем се не може додати ако је скица нерешена или постоје сувишна и конфликтна ограничења. - + Select one edge from the sketch. Изабери једну ивицу са скице. - + Select only edges from the sketch. Изабери само ивице са скице. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Број изабраних објеката није 3 + - Error Грешка @@ -2723,75 +2727,75 @@ invalid constraints, degenerated geometry, etc. На изабрану геометрију се не може применити ограничење хоризонталности или вертикалности! - + Endpoint to endpoint tangency was applied instead. Уместо тога је примењена тангентност у крајњим тачкама. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Изабери два или више темена са скице за ограничење подударности, или два или више кругова, елипса, лукова или лукова елипсе за ограничење концентричности. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Изабери два темена са скице за ограничење подударности, или два круга, елипсе, лукове или лукове елипсе за ограничење концентричности. - + Select exactly one line or one point and one line or two points from the sketch. Изабери тачно једну линију или једну тачку и једну линију, или две тачке из скице. - + Cannot add a length constraint on an axis! Није могуће котирати осу равни! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Изабери тачно једну линију, једну тачку и једну линију, две тачке или два круга на скици. - + This constraint does not make sense for non-linear curves. Ово ограничење нема смисла за нелинеарне криве. - + Endpoint to edge tangency was applied instead. Уместо тога је примењена тангентност ивице у крајњој тачки. - - - - - - + + + + + + Select the right things from the sketch. Изабери праве ствари са скице. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Изабери ивицу која није тежина Б-сплајн контролне тачке. @@ -2801,93 +2805,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. За Ограничење концентричности изабери неколико тачака или неколико кружница, лукова или елипса. - + Select either one point and several curves, or one curve and several points Изабери или једну тачку и неколико кривих, или једну криву и неколико тачака - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Изабери једну тачку и неколико кривих или једну криву и неколико тачака за Ограничење тачка на објекту, неколико тачака за Ограничење подударности или неколико кружница, лукова или елипса за Ограничење концентричности. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Ниједна од изабраних тачака није била ограничена на дотичне криве, јер су делови истог елемента, јер су обе спољашње геометрије или зато што ивица није прихватљива. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ниједна од изабраних тачака није била ограничена на одговарајуће криве, било зато што су делови истог елемента, или зато што су обе спољашње геометрије. - + Cannot add a length constraint on this selection! Није могуће направити коту за изабрани геометријски елемент! - - - - + + + + Select exactly one line or up to two points from the sketch. Изабери тачно једну линију или највише две тачке са скице. - + Cannot add a horizontal length constraint on an axis! Није могуће направити хоризоталну коту на оси равни! - + Cannot add a fixed x-coordinate constraint on the origin point! Није могуће ограничити x-координату координатног почетка! - - + + This constraint only makes sense on a line segment or a pair of points. Ово ограничење има смисла само на сегменту линије или пару тачака. - + Cannot add a vertical length constraint on an axis! Није могуће направити вертикалну коту на оси равни! - + Cannot add a fixed y-coordinate constraint on the origin point! Није могуће ограничити y-координату координатног почетка! - + Select two or more lines from the sketch. Изабери две или више линија са скице. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Изабери најмање две линије са скице. - - Select a valid line. - Изабери важећу ивицу. - - - - + The selected edge is not a valid line. Изабрана ивица није важећа линија. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Прихватљиве комбинације: две криве; крајња тачка и крива; две крајње тачке; две криве и тачка. - + Select some geometry from the sketch. perpendicular constraint Изабери неку геометрију из скице. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не може се додати ограничење управности на тачку пошто она није крајња тачка! - - + + One of the selected edges should be a line. Једна од изабраних ивица би требала бити линија. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Примењена је тангентност на крајње тачке. Ограничење подударности је избрисано. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Примењена је тангентност између крајње тачке и ивице. Ограничење тачка на објекту је обрисано. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2935,67 +2938,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Прихваћене комбинације: две криве; крајња тачка и крива; две крајње тачке; две криве и тачка. - + Select some geometry from the sketch. tangent constraint Изабери неку геометрију из скице. - - - + + + Cannot add a tangency constraint at an unconnected point! Не може се додати ограничење тангентности у тачкама које се не поклапају! - - + + Tangent constraint at B-spline knot is only supported with lines! Ограничење тангентности се може применити на чвор Б-сплајна само ако је у питању линија! - + B-spline knot to endpoint tangency was applied instead. Уместо тога је примењена тангентност између чвора Б-сплајна и крајње тачке. - - + + Wrong number of selected objects! Погрешан број изабраних објеката! - - + + With 3 objects, there must be 2 curves and 1 point. Код 3 објекта, морају постојати 2 криве и 1 тачка. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Изабери један или више лукова или кругова са скице. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Изабери само један или више полова Б-сплајн криве или само један или више лукова или кругова са скице, али не помешано. - - - + + + Constraint only applies to arcs or circles. Ограничење се односи само на лукове и кружнице. - - + + Select one or two lines from the sketch. Or select two edges and a point. Изабери једну или две линије са скице, или изаберите две ивице и тачку. @@ -3010,88 +3013,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c За две паралелне праве не може се поставити ограничење угла. - + Cannot add an angle constraint on an axis! Не можете додати ограничење угла на осу! - + Select two edges from the sketch. Изабери две ивице са скице. - + Select two or more compatible edges. Изабери две или више компатибилних ивица. - + Sketch axes cannot be used in equality constraints. На осе скице се не може применити ограничење једнакости. - + Equality for B-spline edge currently unsupported. Примена ограничења једнакости на Б-сплајн криву тренутно није подржана. - - - + + + Select two or more edges of similar type. Изабери две или више ивица сличног типа. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Изабери две тачке и линију симетрије, две тачке и тачку симетрије или праву и тачку симетрије са скице. - - + + Cannot add a symmetry constraint between a line and its end points. Није могуће додати ограничење симетричности између линије и њених крајњих тачака. - - + + Cannot add a symmetry constraint between a line and its end points! Није могуће додати ограничење симетричности између линије и њених крајњих тачака! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Изабери две крајње тачке линија које ће деловати као зраци и ивицу која представља границу. Прва изабрана тачка одговара индексу лома н1, друга н2, а однос н2/н1 је релативни индекс лома. - + Selected objects are not just geometry from one sketch. Изабрани објекти нису само геометрија из једне скице. - + Cannot create constraint with external geometry only. Није могуће креирати ограничење само са спољном геометријом. - + Incompatible geometry is selected. Изабрана је некомпатибилна геометрија. + - - - - + + + Select constraints from the sketch. Изабери ограничења са скице. @@ -3113,9 +3116,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Задај степен Б-сплајн криве, између 1 и %1: - + CAD Kernel Error Грешка CAD језгра @@ -3191,69 +3194,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Треба изабрати две крајње тачке или подударну тачку. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Изабери елементе из једне скице. - + No constraint selected Ниједно ограничење није изабрано - + At least one constraint must be selected Најмање једно ограничење мора бити изабрано - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Симетрична конструкција захтева најмање два геометријска елемента, последњи геометријски елемент је референтни за грађење симетрије. - + The last element must be a point or a line serving as reference for the symmetry construction. Последњи елемент мора бити тачка или права и референтни је за грађење симетрије. - - + + A copy requires at least one selected non-external geometric element Копија захтева најмање један изабрани геометријски елемент који није спољни - + Delete All Geometry Обриши сву геометрију - + Are you really sure you want to delete all geometry and constraints? Да ли си заиста сигуран да желиш да обришеш сву геометрију и ограничења? - + Delete All Constraints Избриши сва ограничавања - + Are you really sure you want to delete all the constraints? Да ли си заиста сигуран да желиш да обришеш сву геометрију и ограничења? - + Removal of axes alignment requires at least one selected non-external geometric element Да би сте могли уклоното осе поравнања потребно је имати изабран најмање један геометријски елемент који није спољњи @@ -3287,7 +3290,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line parameters - Параметри линије + Параметри дужи @@ -3332,7 +3335,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters - Scale parameters + Параметри скалирања + + + + Translate parameters + Translate parameters @@ -3644,12 +3652,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Дужина: - + Refractive index ratio Релативни индекс лома - + Ratio n2/n1: Однос n2/n1: @@ -3689,7 +3697,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - Линија + Дуж @@ -4065,13 +4073,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Направи правоугаоно умножавање + Create regular polygon + Направи правилни многоугао - Number of Sides: - Број страна: + Number of sides: + Number of sides: @@ -4090,7 +4098,7 @@ reflected on copies Task panel widgets - Task panel widgets + Елемент интерфејса Панел задатака @@ -4174,7 +4182,7 @@ Requires to re-enter edit mode to take effect. Dimension constraint - Dimension constraint + Кота @@ -4183,11 +4191,11 @@ Requires to re-enter edit mode to take effect. 'Separated tools': Individual tools for each dimensioning constraint. 'Both': You will have both the 'Dimension' tool and the separated tools. This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. - Select the type of dimensioning constraints for your toolbar: -'Single tool': A single tool for all dimensioning constraints in the toolbar: Distance, Distance X / Y, Angle, Radius. (Others in dropdown) -'Separated tools': Individual tools for each dimensioning constraint. -'Both': You will have both the 'Dimension' tool and the separated tools. -This setting is only for the toolbar. Whichever you choose, all tools are always available in the menu and through shortcuts. + Изабери врсту алатки за котирање на траци са алаткама: +'Заједничка алатка': Један алатка за све врсте котирања: Растојање, Растојање X/Y, Угао, Полупречник. (Остале у падајућем менију) +'Раздвојене алатке': Појединачне алатке за сваку врсту котирања. +'Обе врсте алатки': На траци са алаткама ће се налазити и заједничка и појединачне алатке за котирање. +Ово подешавање је само за траку са алаткама. Шта год буде изабрано, сви алати су увек доступни у менију и помоћу пречица. @@ -4195,10 +4203,10 @@ This setting is only for the toolbar. Whichever you choose, all tools are always 'Auto': The tool will apply radius to arcs and diameter to circles. 'Diameter': The tool will apply diameter to both arcs and circles. 'Radius': The tool will apply radius to both arcs and circles. - While using the Dimension tool you may choose how to handle circles and arcs: -'Auto': The tool will apply radius to arcs and diameter to circles. -'Diameter': The tool will apply diameter to both arcs and circles. -'Radius': The tool will apply radius to both arcs and circles. + Док се користи алатка за котирање, могуће је бирати третирање кругова и лукова: +'Ауто': Алатка ће котирати полупречник лукова и пречник кругова. +'Пречник': Алатка ће котирати пречник лукова и кругова. +'Полупречник': Алатка ће котирати полупречник лукова и кругова. @@ -4787,7 +4795,7 @@ However, no constraints linking to the endpoints were found. Line - Линија + Дуж @@ -5075,112 +5083,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Измени скицу - + A dialog is already open in the task panel Дијалог је већ отворен у панелу задатака - + Do you want to close this dialog? Да ли желите да затворите овај дијалог? - + Invalid sketch Неисправна скица - + Do you want to open the sketch validation tool? Да ли желиш да отвориш алатку за проверу скице? - + The sketch is invalid and cannot be edited. Скица садржи грешке и не може бити мењана. - + Please remove the following constraint: Уклони следеће ограничење: - + Please remove at least one of the following constraints: Уклони бар једно од следећих ограничења: - + Please remove the following redundant constraint: Уклони следеће сувишно ограничење: - + Please remove the following redundant constraints: Уклони следећа сувишна ограничења: - + The following constraint is partially redundant: Следеће ограничење је сувишно: - + The following constraints are partially redundant: Следећа ограничења су сувишна: - + Please remove the following malformed constraint: Уклони следеће оштећено ограничење: - + Please remove the following malformed constraints: Уклони следеће оштећена ограничења: - + Empty sketch Празна скица - + Over-constrained: Превише ограничено: - + Malformed constraints: Оштећена ограничења: - + Redundant constraints: Сувишна ограничења: - + Partially redundant: Делимично сувишна: - + Solver failed to converge Солвер није успео да се приближи - + Under constrained: Недовољно ограничена: - + %n DoF(s) %n Степени слободе @@ -5189,7 +5197,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Потпуно ограничена @@ -5260,8 +5268,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Прави клона геометрије узимајући као референтну последњу изабрану тачку @@ -5269,17 +5277,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Клон - + Copy Копирај - + Move Помери @@ -5287,8 +5295,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Котирај пречник круга или лука @@ -5296,8 +5304,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Котирај полупречник/пречник кругова или лукова @@ -5305,8 +5313,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Котирај полупречник круга или лука @@ -5314,8 +5322,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Прави једноставну копију геометрије узимајући као референтну последњу изабрану тачку @@ -5601,8 +5609,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Премешта геоматрију у односу на задњу изабрану тачку @@ -5927,7 +5935,7 @@ Eigen редак QR алгоритам је оптимизован за ретк ViewProviderSketch - + and %1 more и %1 више @@ -6157,64 +6165,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Грешка - + Failed to delete all geometry Није успело брисање све геометрије - + Failed to delete all constraints Није успело брисање свих ограничења - - + + Invalid selection Неисправан избор - + Selection has no valid geometries. Није изабрана важећа геометрија. - + Selection has no valid geometries. BSplines, Points are not supported yet. Није изабрана одговарајућа геометрија. Б-Сплајнови и тачке још нису подржани. @@ -6224,18 +6233,18 @@ The grid spacing change if it becomes smaller than this number of pixel.Ограничење има погрешне индексне информације тако да је неисправно. - - - - - - - + + + + + + + Invalid Constraint Неисправно ограничење @@ -6275,8 +6284,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Грешка приликом прављења пола Б-Сплајн криве - + Error creating B-spline Грешка приликом прављења Б-Сплајн криве @@ -6329,19 +6338,20 @@ The grid spacing change if it becomes smaller than this number of pixel. Failed to add line - Додавање линије није успело + Додавање дужи није успело - - - - - - - - + + + + + + + + + Tool execution aborted Извршавање алатке је прекинуто @@ -6376,9 +6386,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Опсецање ивице није успело + - Value Error Грешка вредности @@ -6430,7 +6440,12 @@ The grid spacing change if it becomes smaller than this number of pixel. Failed to scale - Failed to scale + Скалирање није успело + + + + Failed to translate + Failed to translate @@ -6620,7 +6635,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Dimension - Кота + Котирање - Димензиона ограничења @@ -6631,12 +6646,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Ограничење полупречника - + Fix the radius of a circle or an arc Котирај полупречник круга или лука @@ -6753,12 +6768,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Одмак - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Одмак изабране геометрије. Позитивна вредност одмакне ка споља, а негативна према унутра. @@ -6833,7 +6848,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrains a single line to either horizontal or vertical. - Ограничи линију да буде хоризонтална или вертикална. + Ограничи дуж да буде хоризонтална или вертикална. @@ -6846,7 +6861,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Constrains a single line to either horizontal or vertical, whichever is closer to current alignment. - Ограничи линију да буде хоризонтална или вертикална. Изабери оно стање које је ближе тренутном положају. + Ограничи дуж да буде хоризонтална или вертикална. Изабери оно стање које је ближе тренутном положају. @@ -6891,12 +6906,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Ограничења подударности - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Направи ограничење подударности између тачака или ограничи тачку за неки ивицу или направи ограничење концентричности између кругова, лукова и елипса @@ -6904,12 +6919,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Кружно умножавање - + Rotate selected geometries, making n copies, enable creation of circular patterns. Ротирај и умножи по кружници изабрану геометрију, направи н копија. @@ -6929,7 +6944,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Creating line - Прављење линије + Прављење дужи @@ -6976,7 +6991,7 @@ Left clicking on empty space will validate the current constraint. Right clickin Pattern - Pattern + Умножавање @@ -7226,12 +7241,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7239,12 +7254,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7252,12 +7267,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7265,14 +7280,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Клонирај ограничења + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index bb27443ce2..2baa1d9ed0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Skapar en klon av geometrin med den senaste valda punkten som referens @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Begränsa båge eller cirkel - + Constrain an arc or a circle Begränsa en båge eller cirkel - + Constrain radius Begränsa radie - + Constrain diameter Begränsa diameter - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Skapar en klon av geometrin med den senaste valda punkten som referens @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Begränsa vinkel - + Fix the angle of a line or the angle between two lines Fixera en linjes vinkel eller vinkeln mellan två linjer @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Begränsa sammanfallande - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Begränsa diameter - + Fix the diameter of a circle or an arc Fixera diametern av en cirkel eller en båge @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Begränsningsavstånd - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Begränsa horisontellt avstånd - + Fix the horizontal distance between two points or line ends Fixera det horisontella avståndet mellan två punkter eller linjeändar @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Begränsa vertikalt avstånd - + Fix the vertical distance between two points or line ends Fixera det vertikala avståndet mellan två punkter eller linjeändar @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Begränsa lika - + Create an equality constraint between two lines or between circles and arcs Skapa en jämlikhetsbegränsning mellan två linjer eller mellan cirklar och cirkelbågar @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Begränsa parallellt - + Create a parallel constraint between two lines Skapa en parallell begränsning mellan två linjer @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Begränsa vinkelrätt - + Create a perpendicular constraint between two lines Skapa en vinkelrät begränsning mellan två linjer @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Begränsa punkt på objekt - + Fix a point onto an object Fixera en punkt på ett objekt @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Begränsa symmetriskt - + Create a symmetry constraint between two points with respect to a line or a third point Skapa en symmetribegränsning mellan två punkter @@ -602,12 +602,12 @@ med avseende på en linje eller tredje punkt CmdSketcherConstrainTangent - + Constrain tangent Begränsa tangens - + Create a tangent constraint between two entities Skapa en tangentbegränsning mellan två föremål @@ -641,12 +641,12 @@ med avseende på en linje eller tredje punkt CmdSketcherCopy - + Copy Kopiera - + Creates a simple copy of the geometry taking as reference the last selected point Skapar en enkel kopia av geometrin med den senaste valda punkten som referens @@ -1031,12 +1031,12 @@ med avseende på en linje eller tredje punkt CmdSketcherDeleteAllConstraints - + Delete all constraints Radera alla begränsningar - + Delete all constraints in the sketch Ta bort alla begränsningar i skissen @@ -1044,12 +1044,12 @@ med avseende på en linje eller tredje punkt CmdSketcherDeleteAllGeometry - + Delete all geometry Radera all geometri - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1233,12 +1233,12 @@ som speglingsreferens. CmdSketcherMove - + Move Flytta - + Moves the geometry taking as reference the last selected point Flyttar geometrin med den senast valda punkten som referens @@ -1259,12 +1259,12 @@ som speglingsreferens. CmdSketcherRectangularArray - + Rectangular array Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Skapar ett rektangulärt radmönster av geometrin med den senast valda punkten som referens @@ -1272,12 +1272,12 @@ som speglingsreferens. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1300,12 +1300,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Visa/dölj inre geometri - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1313,8 +1313,8 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Markera motstridiga begränsningar @@ -1322,12 +1322,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectConstraints - + Select associated constraints Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1335,12 +1335,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1348,12 +1348,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Markera geometriska element där lösaren fortfarande hittar obegränsade frihetsgrader. @@ -1361,12 +1361,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Markera horisontell axel - + Select the local horizontal axis of the sketch Markera skissens lokala horisontella axel @@ -1374,8 +1374,8 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1383,12 +1383,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Select the local origin point of the sketch @@ -1396,8 +1396,8 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Select partially redundant constraints @@ -1405,8 +1405,8 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Markera överflödiga begränsningar @@ -1414,12 +1414,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSelectVerticalAxis - + Select vertical axis Markera vertikal axel - + Select the local vertical axis of the sketch Markera skissens lokala vertikala axel @@ -1466,12 +1466,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherSymmetry - + Symmetry Symmetri - + Creates symmetric geometry with respect to the last selected line or point Skapar symmetrisk geometri med avseende på den senast valda linjen eller punkten @@ -1479,12 +1479,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Aktiverar eller deaktiverar markerade begränsningar @@ -1505,12 +1505,12 @@ Detta kommer att rensa "stöd"-egenskapen, om den finns. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1599,54 +1599,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1655,8 +1655,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Add length constraint @@ -1778,159 +1778,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Add perpendicular constraint - + Add perpendicularity constraint Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2101,47 +2101,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Skapa symmetrisk geometri - + Copy/clone/move geometry Kopiera/klona/flytta geometri - + Create copy of geometry Skapa kopia av geometri - + Delete all geometry Radera all geometri - + Delete All Constraints Radera alla begränsningar - + Remove Axes Alignment Remove Axes Alignment @@ -2159,8 +2159,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2175,22 +2175,22 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Dra punkt - + Drag Curve Dra kurva - + Drag Constraint Drag Constraint - + Modify sketch constraints Modify sketch constraints @@ -2229,6 +2229,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ invalid constraints, degenerated geometry, etc. Koppla inte till - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Fel val @@ -2633,8 +2637,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Dubbelbegränsning @@ -2650,8 +2654,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Den valda kanten har redan en blockeringsbegränsning! @@ -2663,7 +2667,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Välj hörnpunkter från skissen. @@ -2688,29 +2692,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Välj en kant i skissen. - + Select only edges from the sketch. Välj endast kanter i skissen. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Fel @@ -2725,75 +2729,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Slutpunkt till slutpunkt-tangering tillämpades istället. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Välj exakt en linje eller en punkt och en linje eller två punkter från skissen. - + Cannot add a length constraint on an axis! Kan inte lägga till längdbegränsning på en axel! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Välj de rätta sakerna från skissen. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2803,93 +2807,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Ingen av de valda punkterna begränsades till de respektive kurvorna, antingen för att de är delar av samma element eller för att båda är yttre geometri. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Välj exakt en linje eller upp till två punkter från skissen. - + Cannot add a horizontal length constraint on an axis! Kan inte lägga till en horisontell längdbegränsning på en axel! - + Cannot add a fixed x-coordinate constraint on the origin point! Kan inte lägga till en fast x-koordinatsbegränsning på origo! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Kan inte lägga till en vertikal längdbegränsning på en axel! - + Cannot add a fixed y-coordinate constraint on the origin point! Kan inte lägga till en fast y-koordinatsbegränsning på origo! - + Select two or more lines from the sketch. Välj två eller flera linjer från skissen. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Välj åtminstone två linjer från skissen. - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2899,35 +2902,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunkter; två kurvor och en punkt. - + Select some geometry from the sketch. perpendicular constraint Välj geometri(er) från skissen. - - + + Cannot add a perpendicularity constraint at an unconnected point! Kan inte lägga till en vinkelräthetsbegränsning vid en oansluten punkt! - - + + One of the selected edges should be a line. En av de markerade kanterna ska vara en linje. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Slutpunkt till slutpunkt-tangering tillämpades. Sammanfallningsbegränsningen raderades. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2937,67 +2940,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunkter; två kurvor och en punkt. - + Select some geometry from the sketch. tangent constraint Välj geometri(er) från skissen. - - - + + + Cannot add a tangency constraint at an unconnected point! Kan inte lägga till ett tangensbegränsning vid en oansluten punkt! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Felaktigt antal valda objekt! - - + + With 3 objects, there must be 2 curves and 1 point. Med tre objekt måste det vara två kurvor och en punkt. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Markera en eller fler bågar eller cirklar från skissen. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. Begränsning tillämpas bara på bågar eller cirklar. - - + + Select one or two lines from the sketch. Or select two edges and a point. Välj en eller två linjer från skissen, eller två kanter och en punkt. @@ -3012,88 +3015,88 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk En vinkelbegränsning kan inte tillämpas på två parallella linjer. - + Cannot add an angle constraint on an axis! Kan inte lägga till vinkelbegränsning på en axel! - + Select two edges from the sketch. Välj två kanter från skissen. - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. Likhet för B-spline-kant stöds inte just nu. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Välj två punkter och en symmetrilinje, två punkter och en symmetripunkt eller en linje och en symmetripunkt från skissen. - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! Kan inte lägga till symmetribegränsning mellan en linje och dess ändpunkter! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Valda objekt är inte geometri från endast en skiss. - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3115,9 +3118,9 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-kärnfel @@ -3193,69 +3196,69 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Välj element från endast en skiss. - + No constraint selected Ingen begränsning vald - + At least one constraint must be selected Minst en begränsning måste vara vald - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. En symmetrisk konstruktion kräver minst två geometriska element, det sist valda elementet fungerar som referens för symmetrikonstruktionen. - + The last element must be a point or a line serving as reference for the symmetry construction. Det sista elementet måste vara en punkt eller en linje som fungerar som referens för symmetrikonstruktionen. - - + + A copy requires at least one selected non-external geometric element En kopia kräver minst ett valt geometriskt element som inte är yttre geometri - + Delete All Geometry Radera all geometri - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Radera alla begränsningar - + Are you really sure you want to delete all the constraints? Är du säker på att du vill radera alla begränsningar? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3336,6 +3339,11 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3646,12 +3654,12 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Längd: - + Refractive index ratio Brytningsindexsförhållande - + Ratio n2/n1: Förhållande n2/n1: @@ -4067,13 +4075,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Skapa fält + Create regular polygon + Skapa liksidig polygon - Number of Sides: - Antal sidor: + Number of sides: + Number of sides: @@ -5077,112 +5085,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Redigera skiss - + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - + Do you want to close this dialog? Vill du stänga denna dialogruta? - + Invalid sketch Ogiltig skiss - + Do you want to open the sketch validation tool? Vill du öppna verktyget för skissvalidering? - + The sketch is invalid and cannot be edited. Skissen är ogiltig och kan inte redigeras. - + Please remove the following constraint: Ta bort följande begränsning: - + Please remove at least one of the following constraints: Ta bort minst en av följande begränsningar: - + Please remove the following redundant constraint: Ta bort följande redundanta begränsningen: - + Please remove the following redundant constraints: Ta bort följande redundanta begränsningarna: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Tom skiss - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5190,7 +5198,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fullständigt begränsad @@ -5261,8 +5269,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Skapar en klon av geometrin med den senaste valda punkten som referens @@ -5270,17 +5278,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Klon - + Copy Kopiera - + Move Flytta @@ -5288,8 +5296,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixera diametern av en cirkel eller en båge @@ -5297,8 +5305,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5306,8 +5314,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixera cirkelns eller cirkelbågens radie @@ -5315,8 +5323,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Skapar en enkel kopia av geometrin med den senaste valda punkten som referens @@ -5602,8 +5610,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Flyttar geometrin med den senast valda punkten som referens @@ -5928,7 +5936,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more och %1 till @@ -6158,64 +6166,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Fel - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Ogiltig markering - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6225,18 +6234,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6276,8 +6285,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6333,16 +6342,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6377,9 +6387,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Värdefel @@ -6433,6 +6443,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6632,12 +6647,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Begränsa radie - + Fix the radius of a circle or an arc Fixera cirkelns eller cirkelbågens radie @@ -6754,12 +6769,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6892,12 +6907,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Begränsa sammanfallande - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6905,12 +6920,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7227,12 +7242,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7240,12 +7255,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7253,12 +7268,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7266,14 +7281,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index d79578cb9e..6ef03a4f92 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriye ait bir klon oluşturur @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Yay ya da çemberi kısıtla - + Constrain an arc or a circle Bir yayı ya da bir çemberi kısıtla - + Constrain radius Yarıçapı sınırla - + Constrain diameter Çapı kısıtla - + Constrain auto radius/diameter Yarı çapı/çapı otomatik kısıtla @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Klon - + Creates a clone of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriye ait bir klon oluşturur @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Açı kısıtlaması - + Fix the angle of a line or the angle between two lines Bir çizginin açısını veya iki çizgi arasındaki açıyı düzeltin @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Çakıştır - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Noktalar arasında çakışık veya daireler, yaylar ve elipsler arasında eşmerkezli bir kısıtlama oluşturun @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Çapı kısıtla - + Fix the diameter of a circle or an arc Bir çemberin veya bir yayın yarıçapını düzelt @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Mesafeyi kısıtla - + Fix a length of a line or the distance between a line and a vertex or between two circles Bir çizginin uzunluğunu veya bir çizgi ile bir tepe noktası arasındaki veya iki daire arasındaki mesafeyi sabitleyin @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Yatay mesafeyi kısıtla - + Fix the horizontal distance between two points or line ends İki nokta veya çizgi uçları arasındaki yatay mesafeyi sabitleyin @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Dikey mesafeyi kısıtla - + Fix the vertical distance between two points or line ends İki nokta veya çizgi ucu arasındaki dikey mesafeyi düzeltin @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Eşitle - + Create an equality constraint between two lines or between circles and arcs İki çizginin veya dairelerin ve yayların değerlerini eşitleyin (kısıtlaması oluşturun) @@ -520,12 +520,12 @@ seçilen köşe noktasında CmdSketcherConstrainParallel - + Constrain parallel Paralel yap - + Create a parallel constraint between two lines İki çizgi arasında paralel kısıtlama oluşturun @@ -533,12 +533,12 @@ seçilen köşe noktasında CmdSketcherConstrainPerpendicular - + Constrain perpendicular Dikey yap - + Create a perpendicular constraint between two lines İki çizgi arasında dikey bir kısıtlama oluşturun @@ -546,12 +546,12 @@ seçilen köşe noktasında CmdSketcherConstrainPointOnObject - + Constrain point onto object Noktayı nesneye çakıştır - + Fix a point onto an object Teğetsel kısıtlama oluştur @@ -559,12 +559,12 @@ seçilen köşe noktasında CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Yarı çapı/çapı otomatik kısıtla - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ seçilen köşe noktasında CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Kırılmayı kısıtla (Snell yasası) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Simetrik kısıtlama - + Create a symmetry constraint between two points with respect to a line or a third point Bir çizgi veya üçüncü bir noktaya göre, iki nokta arasında simetri sınırlaması oluştur @@ -601,12 +601,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Teğet yap - + Create a tangent constraint between two entities İki öğe arasında teğetsel kısıtlama oluşturun @@ -640,12 +640,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Kopyala - + Creates a simple copy of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometrinin basit bir kopyasını oluşturur @@ -1030,12 +1030,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Tüm Kısıtlamaları Sil - + Delete all constraints in the sketch Eskizdeki Tüm Kısıtlamaları Silin @@ -1043,12 +1043,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Tüm geometriyi sil - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Harici geometri dışında, geçerli eskizdeki tüm geometri ve kısıtlamaları sil @@ -1229,12 +1229,12 @@ as mirroring reference. CmdSketcherMove - + Move Taşı - + Moves the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriyi hareket ettirir @@ -1255,12 +1255,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Dikdörtgenel dizi - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriye dikdörtgen şeklinde bir desen oluşturur @@ -1268,12 +1268,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Eksenler hizalamasını kaldır - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Seçimin kısıtlama ilişkisini korumaya çalışırken, eksenler hizalamasını kaldırmak için kısıtlamaları değiştirir @@ -1296,12 +1296,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry İç geometriyi göster / gizle - + Show all internal geometry or hide unused internal geometry Tüm dahili geometriyi gösterin veya kullanılmayan dahili geometriyi gizleyin @@ -1309,8 +1309,8 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Çakışan kısıtlamaları seçin @@ -1318,12 +1318,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectConstraints - + Select associated constraints İlişkili kısıtlamaları seçin - + Select the constraints associated with the selected geometrical elements Seçili geometrik öğelerle ilişkili sınırlamaları seçin @@ -1331,12 +1331,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry İlişkili geometri seçin - + Select the geometrical elements associated with the selected constraints Seçili sınırlamalarla ilişkili geometrik öğeleri seçin @@ -1344,12 +1344,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Kısıtlamasız DoF seçin - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Çözücünün hala sınırlandırılmamış serbestlik derecelerini algıladığı geometrik öğeleri seçin. @@ -1357,12 +1357,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Yatay ekseni seçin - + Select the local horizontal axis of the sketch Eskizin yerel yatay eksenini seçin @@ -1370,8 +1370,8 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Yanlış biçimlendirilmiş kısıtlamaları seçin @@ -1379,12 +1379,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectOrigin - + Select origin Orijin seçin - + Select the local origin point of the sketch Eskizin yerel orijin (başlangıç) noktasını seçin @@ -1392,8 +1392,8 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Kısmen gereksiz kısıtlamaları seçin @@ -1401,8 +1401,8 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Gereksiz kısıtlamaları seçin @@ -1410,12 +1410,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSelectVerticalAxis - + Select vertical axis Dikey ekseni seçin - + Select the local vertical axis of the sketch Eskizin yerel dikey eksenini seçin @@ -1462,12 +1462,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherSymmetry - + Symmetry Simetri - + Creates symmetric geometry with respect to the last selected line or point Son seçilen çizgi veya noktaya göre simetrik geometri oluşturur @@ -1475,12 +1475,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Kısıtlamayı etkinleştir / devre dışı bırak - + Activates or deactivates the selected constraints Seçili kısıtlamaları etkinleştirir veya devre dışı bırakır @@ -1501,12 +1501,12 @@ Bu, eğer varsa, 'Destek' özelliğini temizler. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Sevk / referans kısıtlamasını değiştir - + Set the toolbar, or the selected constraints, into driving or reference mode Araç çubuğunu veya seçili kısıtlamaları, @@ -1595,54 +1595,54 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Sabitleme sınırlaması ekle - + Add 'Block' constraint 'Blok' kısıtlaması ekle - + Add block constraint Blok kısıtlaması ekle - - + + Add coincident constraint Çakışıklık sınırlaması ekle - - + + Add distance from horizontal axis constraint Yatay eksen sınırlamasından mesafe ekle - - + + Add distance from vertical axis constraint Dikey eksen sınırlamasından mesafe ekle - - + + Add point to point distance constraint 'Noktadan noktaya mesafe' sınırlaması ekle - - + + Add point to line Distance constraint 'Noktadan çizgiye mesafe' sınırlaması ekle - - + + Add circle to circle distance constraint Daireden daireye kısıtlama ekle - + Add circle to line distance constraint Daireden çizgiye kısıtlama ekle @@ -1651,8 +1651,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - + + Add length constraint Uzunluk sınırlaması ekle @@ -1774,159 +1774,159 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Y eksenine uzaklık kısıtlaması ekle - + Add point to circle Distance constraint Çember merkez noktasına mesafe kısıtlaması ekle - - + + Add point on object constraint 'Nesne üzerindeki bir nokta' sınırlaması ekle - - + + Add point to point horizontal distance constraint 'Noktadan noktaya yatay mesafe' sınırlaması ekle - + Add fixed x-coordinate constraint Sabit x koordinatı sınırlaması ekle - - + + Add point to point vertical distance constraint 'Noktadan noktaya dikey mesafe' sınırlaması ekle - + Add fixed y-coordinate constraint Sabit y koordinatı sınırlaması ekle - - + + Add parallel constraint Paralellik sınırlaması ekle - - - - - - - + + + + + + + Add perpendicular constraint Diklik sınırlaması ekle - + Add perpendicularity constraint Diklik kısıtlaması ekle - + Swap coincident+tangency with ptp tangency Çakışıklık+teğetliği noktadan noktaya teğetlik ile değiştir - + Swap PointOnObject+tangency with point to curve tangency NesneÜzerindeNokta+teğetlik işlevini eğri teğetliğine nokta işlevi ile değiştir - - - - - - - + + + + + + + Add tangent constraint Teğetlik sınırlaması ekle - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Teğetlik sınırlama noktası ekle - - - - + + + + Add radius constraint Yarıçap sınırlaması ekle - - - - + + + + Add diameter constraint Çap sınırlaması ekle - - - - + + + + Add radiam constraint Yarıçap kısıtlaması ekle - - - - + + + + Add angle constraint Açı sınırlaması ekle - - + + Add equality constraint Eşitlik sınırlaması ekle - - - - - + + + + + Add symmetric constraint Simetriklik sınırlaması ekle - + Add Snell's law constraint 'Snell kanunu' sınırlaması ekle - + Toggle constraint to driving/reference Kısıtlamayı sevk/referans olarak değiştir - + Activate/Deactivate constraint Kısıtlamayı etkinleştir / devre dışı bırak @@ -2097,47 +2097,47 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Eğrileri Birleştir - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Dahili Geometriyi Açığa Çıkart - + Create symmetric geometry Simetrik geometri oluşturun - + Copy/clone/move geometry Geometriyi kopyala/klonla/taşı - + Create copy of geometry Geometrinin kopyasını oluştur - + Delete all geometry Tüm geometriyi sil - + Delete All Constraints Tüm Kısıtlamaları Sil - + Remove Axes Alignment Eksen Hizalamayı Kaldır @@ -2155,8 +2155,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Kısıtlamanın sanal alanını güncelleyin - + Add auto constraints Otomatik kısıtlamalar ekleyin @@ -2171,22 +2171,22 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Eskiz kısıtlamasını yeniden adlandır - + Drag Point Noktayı Sürükle - + Drag Curve Eğriyi Sürükle - + Drag Constraint Kısıtlamayı Sürükle - + Modify sketch constraints Eskiz kısıtlamalarını değiştirin @@ -2225,6 +2225,11 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2329,16 +2334,16 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Düğüm B-Spline parametre aralığının dışına eklenemez. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2404,20 +2409,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. İliştirilmez - - - - - - - - - - - - @@ -2428,133 +2421,144 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Yanlış seçim @@ -2629,8 +2633,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - + + Double constraint Çift kısıtlama @@ -2646,8 +2650,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - + + The selected edge already has a Block constraint! Seçilen kenarın zaten bir Blok kısıtlaması var! @@ -2659,7 +2663,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - + Select vertices from the sketch. Eskiden krokileri seçin. @@ -2684,29 +2688,29 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Çizim çözülmediyse veya gereksiz ve çelişen kısıtlamalar varsa bir Blok kısıtlaması eklenemez. - + Select one edge from the sketch. Eskizden bir kenar seçin. - + Select only edges from the sketch. Eskizden sadece kenarları seçin. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Hata @@ -2721,75 +2725,75 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. Bunun yerine, uç noktalar arasında teğetsel bir kısıtlama uygulandı. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Çizimden tam olarak bir çizgi veya bir nokta ve bir çizgi veya iki nokta seçin. - + Cannot add a length constraint on an axis! Bir eksende bir uzunluk sınırlaması eklenemiyor! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Bunun yerine, kenar teğetliğine bitiş noktası uygulandı. - - - - - - + + + + + + Select the right things from the sketch. Eskiden eskizlerden birini seçin. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2799,93 +2803,92 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Seçilen noktaların hiçbiri, aynı elemanın parçaları oldukları, her ikisi de harici geometri oldukları için veya kenar uygun olmadığı için ilgili eğrilerle sınırlandırılmadı. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Seçilen noktalardan hiçbiri ilgili eğrilere aynı elemanın parçaları olduğu için ya da ikisi de harici geometri olduğu için kısıtlanmış değildi. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Çizimden tam olarak bir çizgi veya en fazla iki nokta seçin. - + Cannot add a horizontal length constraint on an axis! Bir eksene yatay uzunluk kısıtlaması eklenemez! - + Cannot add a fixed x-coordinate constraint on the origin point! Orijin noktasına sabit bir x-koordinat kısıtlaması eklenemiyor! - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! Bir eksene dikey uzunluk kısıtı eklenemiyor! - + Cannot add a fixed y-coordinate constraint on the origin point! Orijin noktasına sabit bir y-koordinat kısıtlaması eklenemiyor! - + Select two or more lines from the sketch. Eskizden iki veya daha fazla çizgi seçin. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Çizimden en az iki satır seçin. - - Select a valid line. - Geçerli bir çizgi seçin. - - - - + The selected edge is not a valid line. Seçilen kenar geçerli bir çizgi değil. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2895,35 +2898,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokta; iki eğri ve bir nokta. - + Select some geometry from the sketch. perpendicular constraint Eskizden bazı geometriyi seçin. - - + + Cannot add a perpendicularity constraint at an unconnected point! Bağlantısız bir noktaya diklik kısıtı eklenemiyor! - - + + One of the selected edges should be a line. Seçilen kenarlardan bir tanesi bir çizgi olmalıdır. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Uç noktalar arasında teğetsel bir kısıtlama uygulandı. Çakışık kısıtlama silindi. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Kenar teğetliğine bitiş noktası uygulandı. 'Nesne üzerinde nokta' kısıtlaması silindi. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2933,67 +2936,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokta; iki eğri ve bir nokta. - + Select some geometry from the sketch. tangent constraint Eskizden bazı geometriyi seçin. - - - + + + Cannot add a tangency constraint at an unconnected point! Bağlantısız bir noktaya bir teğet sınırlaması eklenemiyor! - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! Seçilen nesnelerin sayısı yanlış! - - + + With 3 objects, there must be 2 curves and 1 point. 3 nesneyle 2 eğri ve 1 nokta olmalıdır. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Eskizden bir veya daha fazla yay veya daire seçin. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Yalnızca bir veya daha fazla B-Spline kutbu veya eskizden yalnızca bir veya daha fazla yay veya daire seçin, ancak karıştırmayın. - - - + + + Constraint only applies to arcs or circles. Kısıtlama yalnızca yaylar veya daireler için geçerlidir. - - + + Select one or two lines from the sketch. Or select two edges and a point. Çizimden bir veya iki çizgi seçin. Ya da iki kenar ve bir nokta seçin. @@ -3008,88 +3011,88 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt İki paralel çizgi için açı sınırlaması ayarlanamaz. - + Cannot add an angle constraint on an axis! Bir eksene açı sınırlaması eklenemiyor! - + Select two edges from the sketch. Eskizden iki kenar seçin. - + Select two or more compatible edges. İki veya daha fazla uyumlu kenar seçin. - + Sketch axes cannot be used in equality constraints. Eskiz ekseni eşitlik kısıtlamalarında kullanılamaz. - + Equality for B-spline edge currently unsupported. B-spline kenarı için eşitlik şu anda desteklenmiyor. - - - + + + Select two or more edges of similar type. Benzer tipte iki veya daha fazla kenar seçin. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Eskizden iki nokta ve bir simetri çizgisi, iki nokta ve bir simetri noktası veya bir çizgi ve bir simetri noktası seçin. - - + + Cannot add a symmetry constraint between a line and its end points. Bir çizgi ve uç noktaları arasına simetrik kısıtlama eklenemez. - - + + Cannot add a symmetry constraint between a line and its end points! Bir çizgi ile bitiş noktaları arasında bir simetri kısıtı eklenemez! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Işınlar olarak işlev görecek iki çizgi uç noktası ve bir sınırı temsil eden bir kenar seçin. İlk seçilen nokta indeks n1'e, ikincisi n2'ye karşılık gelir ve sıfır değeri n2 / n1 oranını ayarlar. - + Selected objects are not just geometry from one sketch. Seçilen nesneler sadece bir taslaktaki geometri değildir. - + Cannot create constraint with external geometry only. Sadece dış geometri ile kısıtlama oluşturulamaz. - + Incompatible geometry is selected. Uyumsuz geometri seçildi. + - - - - + + + Select constraints from the sketch. Eskizden sınırlamaları seçin. @@ -3111,9 +3114,9 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD Çekirdek Hatası @@ -3189,69 +3192,69 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Tek bir eskizden elemanlar seçin. - + No constraint selected Kısıtlama seçilmedi - + At least one constraint must be selected En az bir kısıtlama seçilmelidir - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Simetrik bir yapı, en azından iki geometrik elemana ihtiyaç duyar, son geometrik eleman simetri yapımında referans olur. - + The last element must be a point or a line serving as reference for the symmetry construction. Son öğe simetri yapımında referans olacak bir nokta veya bir çizgi olmalıdır. - - + + A copy requires at least one selected non-external geometric element Bir kopya, seçilen en az bir dış dış geometrik eleman gerektirir - + Delete All Geometry Tüm Geometriyi Sil - + Are you really sure you want to delete all geometry and constraints? Tüm geometriyi ve kısıtlamaları silmek istediğinizden gerçekten emin misiniz? - + Delete All Constraints Tüm Kısıtlamaları Sil - + Are you really sure you want to delete all the constraints? Bütün kısıtlamaları silmek istediğinden emin misin? - + Removal of axes alignment requires at least one selected non-external geometric element Eksenleri hizalamayı kaldırma için en az bir seçili iç geometrik eleman gerekir @@ -3332,6 +3335,11 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3642,12 +3650,12 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Uzunluk: - + Refractive index ratio Refraktif indeks oranı - + Ratio n2/n1: Oran n2/n1: @@ -4060,13 +4068,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Dizi oluştur + Create regular polygon + Düzenli çokgen oluşturma - Number of Sides: - Yüzeylerin sayısı: + Number of sides: + Number of sides: @@ -5069,112 +5077,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Taslağı düzenle - + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? - + Invalid sketch Geçersiz eskiz - + Do you want to open the sketch validation tool? Eskiz doğrulama aracını açmak istiyor musunuz? - + The sketch is invalid and cannot be edited. Eskiz geçersizdir ve düzenlenemez. - + Please remove the following constraint: Lütfen aşağıdaki kısıtlamayı kaldırın: - + Please remove at least one of the following constraints: Lütfen aşağıdaki kısıtlamalardan en az birini kaldırın: - + Please remove the following redundant constraint: Lütfen aşağıdaki gereksiz kısıtlamayı kaldırın: - + Please remove the following redundant constraints: Lütfen aşağıdaki gereksiz kısıtlamaları kaldırın: - + The following constraint is partially redundant: Aşağıdaki kısıtlama kısmen gereksizdir: - + The following constraints are partially redundant: Aşağıdaki kısıtlamalar kısmen gereksizdir: - + Please remove the following malformed constraint: Lütfen aşağıdaki hatalı biçimlendirilmiş kısıtlamayı kaldırın: - + Please remove the following malformed constraints: Lütfen aşağıdaki hatalı biçimlendirilmiş kısıtlamaları kaldırın: - + Empty sketch Boş eskiz - + Over-constrained: Aşırı-Kısıtlı: - + Malformed constraints: Hatalı biçimlendirilmiş kısıtlamalar: - + Redundant constraints: Gereksiz kısıtlamalar: - + Partially redundant: Kısmen gereksiz: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5182,7 +5190,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5253,8 +5261,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriye ait bir klon oluşturur @@ -5262,17 +5270,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Klon - + Copy Kopyala - + Move Taşı @@ -5280,8 +5288,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Bir çemberin veya bir yayın yarıçapını düzelt @@ -5289,8 +5297,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Bir çember veya yayın yarı çapını/çapını onar @@ -5298,8 +5306,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Bir dairenin veya bir yayın yarıçapını düzeltme @@ -5307,8 +5315,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometrinin basit bir kopyasını oluşturur @@ -5594,8 +5602,8 @@ Bu taslağı seçilen nesnelere ekleme yöntemini seçin. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Son seçilen noktayı referans alarak geometriyi hareket ettirir @@ -5920,7 +5928,7 @@ Eigen Sparse QR algoritması seyrek matrisler için optimize edilmiştir; genell ViewProviderSketch - + and %1 more and %1 more @@ -6150,64 +6158,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Hata - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection Geçersiz seçim - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6217,18 +6226,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6268,8 +6277,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6325,16 +6334,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6369,9 +6379,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6425,6 +6435,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6624,12 +6639,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Yarıçapı sınırla - + Fix the radius of a circle or an arc Bir dairenin veya bir yayın yarıçapını düzeltme @@ -6746,12 +6761,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6884,12 +6899,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Çakıştır - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6897,12 +6912,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7219,12 +7234,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7232,12 +7247,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7245,12 +7260,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7258,14 +7273,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index cafe7f891d..0d61fdc3e4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Клонувати - + Creates a clone of the geometry taking as reference the last selected point Створює копію геометрії, взявши за основу останню виділену точку @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Обмеження для дуги або кола - + Constrain an arc or a circle Створює обмеження для дуги чи кола - + Constrain radius Обмеження за радіусом - + Constrain diameter Обмеження за діаметром - + Constrain auto radius/diameter Автоматичне обмеження за радіусом/діаметром @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Клонувати - + Creates a clone of the geometry taking as reference the last selected point Створює копію геометрії, взявши за основу останню виділену точку @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Кутове обмеження - + Fix the angle of a line or the angle between two lines Задає кут нахилу лінії або кут між двома лініями @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Обмеження збігу - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Створити обмеження збігу між точками або концентричне обмеження між колами, дугами та еліпсами @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Обмеження за діаметром - + Fix the diameter of a circle or an arc Задає діаметр кола або дуги @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Обмеження відстані - + Fix a length of a line or the distance between a line and a vertex or between two circles Фіксує довжину лінії або відстань між лінією і вершиною або між двома колами @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Обмеження відстані по горизонталі - + Fix the horizontal distance between two points or line ends Задає відстань по горизонталі між двома точками або кінцями відрізку @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Обмеження відстані по вертикалі - + Fix the vertical distance between two points or line ends Задає відстань по вертикалі між двома точками або кінцями відрізку @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Еквівалентне обмеження - + Create an equality constraint between two lines or between circles and arcs Створює обмеження еквівалентності між двома лініями, колами або дугами @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Паралельне обмеження - + Create a parallel constraint between two lines Створює обмеження паралельності між двома лініями @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Перпендикулярне обмеження - + Create a perpendicular constraint between two lines Створює обмеження перпендикулярності між двома лініями @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Зафіксувати точку на обʼєкті - + Fix a point onto an object Фіксує точку на обʼєкті @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Автоматичне обмеження за радіусом/діаметром - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Задає діаметр, якщо вибрано коло, або радіус, якщо вибрано полюс дуги/сплайна @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Обмеження за законом заломлення (закон Снеліуса) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Створює обмеження за законом заломлення (закон Снеліуса) між @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Симетричне обмеження - + Create a symmetry constraint between two points with respect to a line or a third point Створює обмеження симетричності між двома @@ -601,12 +601,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Обмеження дотичності - + Create a tangent constraint between two entities Створює обмеження дотичності між двома обʼєктами @@ -640,12 +640,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Копіювати - + Creates a simple copy of the geometry taking as reference the last selected point Створює просту копію геометрії, взявши за основу останню виділену точку @@ -1030,12 +1030,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Видалити всі обмеження - + Delete all constraints in the sketch Видаляє всі обмеження на ескізі @@ -1043,12 +1043,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Видалити всю геометрію - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Видаляє всю геометрію та обмеження у поточному ескізі, за винятком зовнішньої геометрії @@ -1231,12 +1231,12 @@ as mirroring reference. CmdSketcherMove - + Move Переміщення - + Moves the geometry taking as reference the last selected point Переміщує геометрії, приймаючи останню обрану точку в якості орієнтиру @@ -1257,12 +1257,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Прямокутний масив - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Створює прямокутний масив із геометрії, обравши останню виділену точку як основу @@ -1270,12 +1270,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Видалити вирівнювання осей - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Змінює обмеження у виділеній частині, щоб видалити вирівнювання осей, намагаючись зберегти взаємозвʼязок обмежень @@ -1298,12 +1298,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Показати/приховати внутрішню геометрію - + Show all internal geometry or hide unused internal geometry Показує всю внутрішню геометрію або приховує внутрішню геометрію, що не використовується @@ -1311,8 +1311,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Вибрати суперечливі обмеження @@ -1320,12 +1320,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Вибрати повʼязані обмеження - + Select the constraints associated with the selected geometrical elements Вибирає обмеження, які відносяться до виділених геометричних елементів @@ -1333,12 +1333,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Вибрати повʼязану геометрію - + Select the geometrical elements associated with the selected constraints Вибирає геометричні елементи, пов’язані з виділеними обмеженнями @@ -1346,12 +1346,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Вибрати геометрію з необмеженим ступенем свободи - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Вибирає геометричні елементи, де вирішувач досі виявляє не обмежені ступені свободи. @@ -1359,12 +1359,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Вибрати горизонтальну вісь - + Select the local horizontal axis of the sketch Вибирає локальну горизонтальну вісь ескізу @@ -1372,8 +1372,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Вибрати неправильні обмеження @@ -1381,12 +1381,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Вибрати початок координат - + Select the local origin point of the sketch Вибирає локальний початок координат ескізу @@ -1394,8 +1394,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Виділіть частково надлишкові обмеження @@ -1403,8 +1403,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Вибрати надлишкові обмеження @@ -1412,12 +1412,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Вибрати вертикальну вісь - + Select the local vertical axis of the sketch Вибирає локальну вертикальну вісь ескізу @@ -1464,12 +1464,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Симетрія - + Creates symmetric geometry with respect to the last selected line or point Створює симетричну геометрію відносно останньої виділеної лінії або точки @@ -1477,12 +1477,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Активувати/деактивувати обмеження - + Activates or deactivates the selected constraints Активує або деактивує виділені обмеження @@ -1503,12 +1503,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Перемкнути обмеження між допоміжними/основними - + Set the toolbar, or the selected constraints, into driving or reference mode Перемикає панель інструментів в режим допоміжної/основної геометрії або перетворює виділені обмеження в допоміжні/основні @@ -1596,54 +1596,54 @@ invalid constraints, degenerated geometry, etc. Додати фіксуюче обмеження - + Add 'Block' constraint Додати обмеження 'Блокування' - + Add block constraint Додати обмеження блокування - - + + Add coincident constraint Додати обмеження збігу - - + + Add distance from horizontal axis constraint Додати обмеження відстані від горизонтальної осі - - + + Add distance from vertical axis constraint Додати обмеження відстані від вертикальної осі - - + + Add point to point distance constraint Додати обмеження відстані між двома точками - - + + Add point to line Distance constraint Додати обмеження відстані між точкою та лінією - - + + Add circle to circle distance constraint Додати обмеження відстані між двома колами - + Add circle to line distance constraint Додати обмеження відстані між колом та лінією @@ -1652,8 +1652,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Додати обмеження довжини @@ -1775,159 +1775,159 @@ invalid constraints, degenerated geometry, etc. Додати обмеження відстані по Y - + Add point to circle Distance constraint Додати обмеження відстані від точки до кола - - + + Add point on object constraint Додати обмеження точки на об’єкті - - + + Add point to point horizontal distance constraint Додати обмеження відстані за горизонталлю між двома точками - + Add fixed x-coordinate constraint Додати обмеження фіксованої X-координати - - + + Add point to point vertical distance constraint Додати обмеження відстані за вертикаллю між двома точками - + Add fixed y-coordinate constraint Додати обмеження фіксованої Y-координати - - + + Add parallel constraint Додати обмеження паралельності - - - - - - - + + + + + + + Add perpendicular constraint Додати обмеження перпендикуляру - + Add perpendicularity constraint Додати обмеження перпендикулярності - + Swap coincident+tangency with ptp tangency Перетворити збіг+дотик у дотик точка-точка - + Swap PointOnObject+tangency with point to curve tangency Перетворіть обмеження «Точка на обʼєкті» + дотик на обмеження «Дотик до кривої» - - - - - - - + + + + + + + Add tangent constraint Додати обмеження дотику - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Додати обмеження дотику до точки - - - - + + + + Add radius constraint Додати обмеження радіусу - - - - + + + + Add diameter constraint Додати обмеження діаметру - - - - + + + + Add radiam constraint Додати обмеження радіусу/діаметру - - - - + + + + Add angle constraint Додати обмеження кута - - + + Add equality constraint Додати обмеження рівності - - - - - + + + + + Add symmetric constraint Додати обмеження симетрії - + Add Snell's law constraint Додати обмеження за законом заломлення Снеліуса - + Toggle constraint to driving/reference Перемкнути обмеження між допоміжними/основними - + Activate/Deactivate constraint Активувати/деактивувати обмеження @@ -2098,47 +2098,47 @@ invalid constraints, degenerated geometry, etc. Об'єднати Криві - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Розкриття внутрішньої геометрії - + Create symmetric geometry Створити симетричну геометрію - + Copy/clone/move geometry Копіювати/клонувати/перемістити геометрію - + Create copy of geometry Створити копію геометрії - + Delete all geometry Видалити всю геометрію - + Delete All Constraints Видалити всі обмеження - + Remove Axes Alignment Видалити вирівнювання осей @@ -2156,8 +2156,8 @@ invalid constraints, degenerated geometry, etc. Оновити віртуальний простір обмеження - + Add auto constraints Додати автообмеження @@ -2172,22 +2172,22 @@ invalid constraints, degenerated geometry, etc. Перейменувати обмеження ескізу - + Drag Point Перетягнути точку - + Drag Curve Перетягнути криву - + Drag Constraint Перетягнути обмеження - + Modify sketch constraints Змінити обмеження ескізу @@ -2226,6 +2226,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2330,16 +2335,16 @@ invalid constraints, degenerated geometry, etc. Вузол не можна розмістити за межами діапазону параметрів B-сплайну. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range Індекс ToolWidget параметрів поза діапазоном @@ -2405,20 +2410,8 @@ invalid constraints, degenerated geometry, etc. Не приєднувати - - - - - - - - - - - - @@ -2429,133 +2422,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Невірний вибір @@ -2630,8 +2634,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Подвійне обмеження @@ -2647,8 +2651,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! Виділене ребро вже заблоковане! @@ -2660,7 +2664,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Виділіть вершини на ескізі. @@ -2685,29 +2689,29 @@ invalid constraints, degenerated geometry, etc. Блокуюче обмеження не може бути додано, якщо ескіз не можна вирішати або є надлишкові/конфліктуючі обмеження. - + Select one edge from the sketch. Виділіть одне ребро на ескізі. - + Select only edges from the sketch. Виділіть лише ребра на ескізі. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Кількість виділених об'єктів не 3 + - Error Помилка @@ -2722,75 +2726,75 @@ invalid constraints, degenerated geometry, etc. Вибраний елемент(и) не може приймати обмеження по горизонталі або вертикалі! - + Endpoint to endpoint tangency was applied instead. Замість кінцевої точки застосовано дотичну. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Виберіть дві або більше вершин з ескізу для обмеження збігу, або два або більше кіл, еліпсів, дуг або дуг еліпса для концентричного обмеження. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Виберіть дві вершини з ескізу для обмеження збігу, або два кола, еліпси, дуги або дуги еліпса для концентричного обмеження. - + Select exactly one line or one point and one line or two points from the sketch. Виділіть на ескізі лише одну лінію, або одну точку та лінію, або дві точки. - + Cannot add a length constraint on an axis! Не можу додати обмеження довжини на вісь! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Виділіть на ескізі рівно одну лінію або одну точку і одну лінію або дві точки, або два кола. - + This constraint does not make sense for non-linear curves. Це обмеження не має сенсу для нелінійних кривих. - + Endpoint to edge tangency was applied instead. Замість кінцевої точки застосовано дотичну до ребра. - - - - - - + + + + + + Select the right things from the sketch. Виділіть потрібні обʼєкти на ескізі. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Виділіть ребро, яке не є вагою B-сплайну. @@ -2800,93 +2804,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. Жодна з виділених точок не була обмежена відповідними кривими тому, що вони є частинами того ж елементу; вони є зовнішньою геометрією або тому, що ребро не підходить. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Жодна з виділених точок не була обмежена відповідними кривими тому, що вони є частинами того ж елементу або вони є зовнішньою геометрією. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Виділіть на ескізі лише одну лінію або не більше двох точок. - + Cannot add a horizontal length constraint on an axis! Не можу додати горизонтального обмеження довжини на вісь! - + Cannot add a fixed x-coordinate constraint on the origin point! Не можна обмежити X-координату точки початку координат! - - + + This constraint only makes sense on a line segment or a pair of points. Це обмеження має сенс лише для відрізка або пари точок. - + Cannot add a vertical length constraint on an axis! Не можу додати вертикального обмеження довжини на вісь! - + Cannot add a fixed y-coordinate constraint on the origin point! Не можна обмежити Y-координату точки початку координат! - + Select two or more lines from the sketch. Виділіть на ескізі дві або більше ліній. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Виділіть на ескізі принаймні дві лінії. - - Select a valid line. - Виділіть правильну лінію. - - - - + The selected edge is not a valid line. Виділене ребро не є правильною лінією. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2896,35 +2899,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Допустимі комбінації: дві криві; кінцева точка і крива; дві кінцевих точки; дві криві та точка. - + Select some geometry from the sketch. perpendicular constraint Виділіть деяку геометрію ескізу. - - + + Cannot add a perpendicularity constraint at an unconnected point! Не вдалося застосувати обмеження перпендикулярності, бо виділена точка не є частиною кривої! - - + + One of the selected edges should be a line. Одне з виділених ребер повинне бути лінією. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. Застосовано обмеження дотичності між кінцевими точками. Обмеження збігу видалено. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Застосовано обмеження дотичності кінцевої точки до ребра. Обмеження точки на об’єкті було видалено. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2934,67 +2937,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Допустимі комбінації: дві криві; кінцева точка та крива; дві кінцеві точки; дві криві та точка. - + Select some geometry from the sketch. tangent constraint Виділіть деяку геометрію ескізу. - - - + + + Cannot add a tangency constraint at an unconnected point! Не можу додати обмеження дотичної у точці, що не належить кривій! - - + + Tangent constraint at B-spline knot is only supported with lines! Дотичне обмеження на вузлі B-сплайна підтримується лише лініями! - + B-spline knot to endpoint tangency was applied instead. Замість цього застосовано дотичну вузла B-сплайна до кінцевої точки. - - + + Wrong number of selected objects! Неправильна кількість виділених обʼєктів! - - + + With 3 objects, there must be 2 curves and 1 point. Коли вибрано 3 елементи, це повинні бути 2 криві та одна точка. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Виділіть одну або кілька дуг чи кіл на ескізі. - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Виділіть на ескізі лише один чи декілька полюсів B-сплайну або лише одну чи декілька дуг чи кіл, але не змішуйте сплайни та дуги. - - - + + + Constraint only applies to arcs or circles. Обмеження можна застосовувати лише до дуг або кіл. - - + + Select one or two lines from the sketch. Or select two edges and a point. Виділіть одну або дві лінії на ескізі. Або виділіть два ребра і точку. @@ -3009,88 +3012,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Обмеження кута не можна застосувати до паралельних ліній. - + Cannot add an angle constraint on an axis! Не можу додати обмеження кута на вісі! - + Select two edges from the sketch. Виділіть два ребра на ескізі. - + Select two or more compatible edges. Виділіть два або більше сумісних ребра. - + Sketch axes cannot be used in equality constraints. Вісі ескізу не можна використовувати в обмеженнях еквівалентності. - + Equality for B-spline edge currently unsupported. Обмеження рівності ребра B-сплайну не підтримується. - - - + + + Select two or more edges of similar type. Виділіть два або більше ребра однакового типу. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Виділіть на ескізі лише один чи декілька полюсів B-сплайну або лише одну чи декілька дуг чи кіл, але не змішуйте сплайни та дуги. - - + + Cannot add a symmetry constraint between a line and its end points. Неможливо додати обмеження симетрії між лінією та її кінцевими точками. - - + + Cannot add a symmetry constraint between a line and its end points! Неможливо додати обмеження симетрії між лінією та її кінцевими точками! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Виділіть два кінці ліній, які будуть виконувати роль променів, і ребро, що представляє межу розподілу середовищ. Перша обрана точка відповідає індексу n1, друга n2, а опорне значення визначається співвідношенням n2 / n1. - + Selected objects are not just geometry from one sketch. Виділені обʼєкти з різних ескізів. - + Cannot create constraint with external geometry only. Неможливо створити обмеження з використанням тільки зовнішньої геометрії. - + Incompatible geometry is selected. Виділено несумісну геометрію. + - - - - + + + Select constraints from the sketch. Виділіть обмеження на ескізі. @@ -3112,9 +3115,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Визначте ступінь B-сплайну між 1 та %1: - + CAD Kernel Error Помилка ядра CAD @@ -3190,69 +3193,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Необхідно вибрати дві кінцеві точки або точки, що збігаються. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Виділіть елементи з одного ескізу. - + No constraint selected Жодне обмеження не вибране - + At least one constraint must be selected Потрібно вибрати принаймні одне обмеження - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Симетрична конструкція вимагає принаймні двох геометричних елементів, останній геометричний елемент є еталоном для побудови симетрії. - + The last element must be a point or a line serving as reference for the symmetry construction. Останній елемент повинен бути точкою або лінією, яка виступає в якості еталону для побудови симетрії. - - + + A copy requires at least one selected non-external geometric element Копіювання потребує принаймні одного обраного незовнішнього геометричного елемента - + Delete All Geometry Видалити всю геометрію - + Are you really sure you want to delete all geometry and constraints? Ви дійсно бажаєте видалити всю геометрію та обмеження? - + Delete All Constraints Видалити всі обмеження - + Are you really sure you want to delete all the constraints? Ви дійсно бажаєте видалити всі обмеження? - + Removal of axes alignment requires at least one selected non-external geometric element Для видалення вирівнювання осей потрібно вибрати принаймні один не зовнішній геометричний елемент @@ -3333,6 +3336,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3643,12 +3651,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Довжина: - + Refractive index ratio Коефіцієнт заломлення - + Ratio n2/n1: Співвідношення n2/n1: @@ -4064,13 +4072,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Створити масив + Create regular polygon + Створити правильний багатокутник - Number of Sides: - Кількість стовпців: + Number of sides: + Number of sides: @@ -5075,112 +5083,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Редагувати ескіз - + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? - + Invalid sketch Неприпустимий ескіз - + Do you want to open the sketch validation tool? Відкрити інструмент перевірки ескізу? - + The sketch is invalid and cannot be edited. Ескіз містить помилки та не може бути змінений. - + Please remove the following constraint: Будь ласка, видаліть наступне обмеження: - + Please remove at least one of the following constraints: Будь ласка, видаліть принаймні одне з таких обмежень: - + Please remove the following redundant constraint: Будь ласка, видаліть наступне надлишкове обмеження: - + Please remove the following redundant constraints: Видаліть, будь ласка, наступні надлишкові обмеження: - + The following constraint is partially redundant: Наступне обмеження частково надлишкове: - + The following constraints are partially redundant: Наступні обмеження частково надлишкові: - + Please remove the following malformed constraint: Видаліть, будь ласка, наступне невірне обмеження: - + Please remove the following malformed constraints: Видаліть, будь ласка, наступні невірні обмеження: - + Empty sketch Порожній ескіз - + Over-constrained: Надлишкові обмеження: - + Malformed constraints: Невірні обмеження: - + Redundant constraints: Надлишкові обмеження: - + Partially redundant: Частково надлишкові: - + Solver failed to converge Рішення не сходиться - + Under constrained: Частково обмежений: - + %n DoF(s) %n ступінь свободи @@ -5190,7 +5198,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Повністю обмежений @@ -5261,8 +5269,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Створює копію геометрії, взявши за основу останню виділену точку @@ -5270,17 +5278,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Клонувати - + Copy Копіювати - + Move Переміщення @@ -5288,8 +5296,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Задає діаметр кола або дуги @@ -5297,8 +5305,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Задає радіус/діаметр кола або дуги @@ -5306,8 +5314,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Задає радіус кола або дуги @@ -5315,8 +5323,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Створює просту копію геометрії, взявши за основу останню виділену точку @@ -5602,8 +5610,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Переміщує геометрії, приймаючи останню обрану точку в якості орієнтиру @@ -5928,7 +5936,7 @@ Eigen Dense QR — щільна матриця QR з повним поворот ViewProviderSketch - + and %1 more та %1 більше @@ -6157,64 +6165,65 @@ The grid spacing change if it becomes smaller than this number of pixel.Перенесено параболи. Перенесені файли не відкриватимуться у попередніх версіях FreeCAD!!! - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Помилка - + Failed to delete all geometry Не вдалося видалити всю геометрію - + Failed to delete all constraints Не вдалося видалити всі обмеження - - + + Invalid selection Невірний вибір - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Виділення не містить допустиму геометрію. B-сплайни, Точки поки що не підтримуються. @@ -6224,18 +6233,18 @@ The grid spacing change if it becomes smaller than this number of pixel.Обмеження має невірну індексну інформацію та є помилковим. - - - - - - - + + + + + + + Invalid Constraint Неприпустиме обмеження @@ -6275,8 +6284,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Помилка створення полюса B-сплайна - + Error creating B-spline Помилка при створенні B-сплайна @@ -6332,16 +6341,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Не вдалося додати лінію - - - - - - - - + + + + + + + + + Tool execution aborted Виконання команди перервано @@ -6376,9 +6386,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Не вдалося обрізати ребро + - Value Error Помилка в значенні @@ -6432,6 +6442,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6631,12 +6646,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Обмеження за радіусом - + Fix the radius of a circle or an arc Задає радіус кола або дуги @@ -6753,12 +6768,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Зсув виділеної геометрії. Позитивне значення - зсув назовні, негативне - всередину. @@ -6891,12 +6906,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Обмеження збігу - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6904,12 +6919,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Полярне перетворення - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7226,12 +7241,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7239,12 +7254,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7252,12 +7267,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7265,14 +7280,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts index 5626c6bf63..070fc9c18c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat. @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle Restringeix l'arc o el cercle - + Constrain an arc or a circle Restringeix un arc o un cercle - + Constrain radius Restricció del radi - + Constrain diameter Restringeix el diàmetre - + Constrain auto radius/diameter Constrain auto radius/diameter @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone Clona - + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat. @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle Restricció d'angle - + Fix the angle of a line or the angle between two lines Fixa l'angle d'una línia o l'angle entre dues línies @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident Restricció coincident - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter Restringeix el diàmetre - + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance Restricció de distància - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance Constrain horizontal distance - + Fix the horizontal distance between two points or line ends Fixa la distància horitzontal entre dos punts o extrems de línia @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance Constrain vertical distance - + Fix the vertical distance between two points or line ends Fixa la distància vertical entre dos punts o extrems de línia @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal Restricció d'igualtat - + Create an equality constraint between two lines or between circles and arcs Crea una restricció d'igualtat entre dues línies o entre cercles i arcs @@ -520,12 +520,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel Restricció de parel·lelisme - + Create a parallel constraint between two lines Crea una restricció de paral·lelisme entre dues línies @@ -533,12 +533,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular Restricció de perpendicularitat - + Create a perpendicular constraint between two lines Crea una restricció de perpendicularitat entre dues línies @@ -546,12 +546,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object Restricció d'un punt sobre l'objecte - + Fix a point onto an object Fixa un punt sobre un objecte @@ -559,12 +559,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter Constrain auto radius/diameter - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen @@ -572,12 +572,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -587,12 +587,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical Restricció de simetria - + Create a symmetry constraint between two points with respect to a line or a third point Create a symmetry constraint between two points @@ -602,12 +602,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent Restricció tangent - + Create a tangent constraint between two entities Crea una restricció tangent entre dues entitats @@ -641,12 +641,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy Copia - + Creates a simple copy of the geometry taking as reference the last selected point Crea una còpia simple de la geometria prenent com a referència l'últim punt seleccionat. @@ -1031,12 +1031,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints Delete all constraints - + Delete all constraints in the sketch Delete all constraints in the sketch @@ -1044,12 +1044,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1233,12 +1233,12 @@ as mirroring reference. CmdSketcherMove - + Move Mou - + Moves the geometry taking as reference the last selected point Mou la geometria prenent com a referència l'últim punt seleccionat @@ -1259,12 +1259,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point Crea un patró de matriu rectangular de la geometria prenent com a referència l'últim punt seleccionat @@ -1272,12 +1272,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment Remove axes alignment - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection @@ -1300,12 +1300,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry Mostra o amaga la geometria interna - + Show all internal geometry or hide unused internal geometry Show all internal geometry or hide unused internal geometry @@ -1313,8 +1313,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints Select conflicting constraints @@ -1322,12 +1322,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints Select associated constraints - + Select the constraints associated with the selected geometrical elements Select the constraints associated with the selected geometrical elements @@ -1335,12 +1335,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry Select associated geometry - + Select the geometrical elements associated with the selected constraints Select the geometrical elements associated with the selected constraints @@ -1348,12 +1348,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1361,12 +1361,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis Select horizontal axis - + Select the local horizontal axis of the sketch Select the local horizontal axis of the sketch @@ -1374,8 +1374,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints Select malformed constraints @@ -1383,12 +1383,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin Select origin - + Select the local origin point of the sketch Select the local origin point of the sketch @@ -1396,8 +1396,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints Select partially redundant constraints @@ -1405,8 +1405,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints Select redundant constraints @@ -1414,12 +1414,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis Select vertical axis - + Select the local vertical axis of the sketch Select the local vertical axis of the sketch @@ -1466,12 +1466,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry Simetria - + Creates symmetric geometry with respect to the last selected line or point Crea una geometria simètrica respecte a l'última línia o punt seleccionats @@ -1479,12 +1479,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint Activate/deactivate constraint - + Activates or deactivates the selected constraints Activates or deactivates the selected constraints @@ -1505,12 +1505,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode Set the toolbar, or the selected constraints, @@ -1599,54 +1599,54 @@ invalid constraints, degenerated geometry, etc. Add fixed constraint - + Add 'Block' constraint Add 'Block' constraint - + Add block constraint Add block constraint - - + + Add coincident constraint Add coincident constraint - - + + Add distance from horizontal axis constraint Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint Add distance from vertical axis constraint - - + + Add point to point distance constraint Add point to point distance constraint - - + + Add point to line Distance constraint Add point to line Distance constraint - - + + Add circle to circle distance constraint Add circle to circle distance constraint - + Add circle to line distance constraint Add circle to line distance constraint @@ -1655,8 +1655,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint Add length constraint @@ -1778,159 +1778,159 @@ invalid constraints, degenerated geometry, etc. Add DistanceY constraint - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint Add point on object constraint - - + + Add point to point horizontal distance constraint Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint Add point to point vertical distance constraint - + Add fixed y-coordinate constraint Add fixed y-coordinate constraint - - + + Add parallel constraint Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint Add perpendicular constraint - + Add perpendicularity constraint Add perpendicularity constraint - + Swap coincident+tangency with ptp tangency Swap coincident+tangency with ptp tangency - + Swap PointOnObject+tangency with point to curve tangency Swap PointOnObject+tangency with point to curve tangency - - - - - - - + + + + + + + Add tangent constraint Add tangent constraint - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point Add tangent constraint point - - - - + + + + Add radius constraint Add radius constraint - - - - + + + + Add diameter constraint Add diameter constraint - - - - + + + + Add radiam constraint Add radiam constraint - - - - + + + + Add angle constraint Add angle constraint - - + + Add equality constraint Add equality constraint - - - - - + + + + + Add symmetric constraint Add symmetric constraint - + Add Snell's law constraint Add Snell's law constraint - + Toggle constraint to driving/reference Toggle constraint to driving/reference - + Activate/Deactivate constraint Activate/Deactivate constraint @@ -2101,47 +2101,47 @@ invalid constraints, degenerated geometry, etc. Join Curves - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry Exposing Internal Geometry - + Create symmetric geometry Create symmetric geometry - + Copy/clone/move geometry Copy/clone/move geometry - + Create copy of geometry Create copy of geometry - + Delete all geometry Delete all geometry - + Delete All Constraints Suprimeix totes les restriccions - + Remove Axes Alignment Remove Axes Alignment @@ -2159,8 +2159,8 @@ invalid constraints, degenerated geometry, etc. Update constraint's virtual space - + Add auto constraints Add auto constraints @@ -2175,22 +2175,22 @@ invalid constraints, degenerated geometry, etc. Rename sketch constraint - + Drag Point Drag Point - + Drag Curve Drag Curve - + Drag Constraint Drag Constraint - + Modify sketch constraints Modify sketch constraints @@ -2229,6 +2229,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2333,16 +2338,16 @@ invalid constraints, degenerated geometry, etc. Knot cannot be inserted outside the BSpline parameter range. - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2408,20 +2413,8 @@ invalid constraints, degenerated geometry, etc. No adjuntes - - - - - - - - - - - - @@ -2432,133 +2425,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection Selecció incorrecta @@ -2633,8 +2637,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint Restricció doble @@ -2650,8 +2654,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! L'aresta seleccionada ja té una restricció de Bloc. @@ -2663,7 +2667,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. Seleccioneu vèrtexs de l'esbós @@ -2688,29 +2692,29 @@ invalid constraints, degenerated geometry, etc. A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. Seleccioneu una aresta de l'esbós. - + Select only edges from the sketch. Seleccioneu sols arestes de l'esbós. - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 Number of selected objects is not 3 + - Error Error @@ -2725,75 +2729,75 @@ invalid constraints, degenerated geometry, etc. The selected item(s) can't accept a horizontal or vertical constraint! - + Endpoint to endpoint tangency was applied instead. En el seu lloc s'ha aplicat una tangència entre extrems. - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. - + Select exactly one line or one point and one line or two points from the sketch. Seleccioneu únicament una línia o un punt i una línia o dos punts de l'esbós - + Cannot add a length constraint on an axis! No es pot afegir una restricció de longitud sobre un eix. - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. This constraint does not make sense for non-linear curves. - + Endpoint to edge tangency was applied instead. Endpoint to edge tangency was applied instead. - - - - - - + + + + + + Select the right things from the sketch. Seleccioneu els elements correctes de l'esbós - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. Select an edge that is not a B-spline weight. @@ -2803,93 +2807,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. Cap dels punts seleccionats s'han restringit a les corbes respectives, perquè són peces del mateix element o perquè ambdues són de geometria externa. - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. Seleccioneu únicament una línia o fins a dos punts de l'esbós - + Cannot add a horizontal length constraint on an axis! No es pot afegir una restricció de longitud horitzontal sobre un eix. - + Cannot add a fixed x-coordinate constraint on the origin point! No es pot afegir una restricció de coordenada x fixa sobre el punt d'origen. - - + + This constraint only makes sense on a line segment or a pair of points. This constraint only makes sense on a line segment or a pair of points. - + Cannot add a vertical length constraint on an axis! No es pot afegir una restricció de longitud vertical sobre un eix. - + Cannot add a fixed y-coordinate constraint on the origin point! No es pot afegir una restricció de coordenada y fixa sobre el punt d'origen. - + Select two or more lines from the sketch. Seleccioneu una o més línies de l'esbós - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. Seleccioneu almenys dues línies de l'esbós - - Select a valid line. - Select a valid line. - - - - + The selected edge is not a valid line. The selected edge is not a valid line. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2897,35 +2900,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. perpendicular constraint Seleccioneu alguna geometria de l'esbós - - + + Cannot add a perpendicularity constraint at an unconnected point! No es pot afegir una restricció de perpendicularitat en un punt no connectat. - - + + One of the selected edges should be a line. Una de les arestes seleccionades ha de ser una línia. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. S'ha aplicat una tangència entre extrems. S'han suprimit les restriccions coincidents. - + Endpoint to edge tangency was applied. The point on object constraint was deleted. Endpoint to edge tangency was applied. The point on object constraint was deleted. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2933,67 +2936,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Aquesta restricció es pot aplicar de diverses maneres. Les combinacions possibles són: dues corbes; un extrem i una corba; dos extrems; dues corbes i un punt. - + Select some geometry from the sketch. tangent constraint Seleccioneu alguna geometria de l'esbós - - - + + + Cannot add a tangency constraint at an unconnected point! No es pot afegir una restricció de tangència en un punt no connectat. - - + + Tangent constraint at B-spline knot is only supported with lines! Tangent constraint at B-spline knot is only supported with lines! - + B-spline knot to endpoint tangency was applied instead. B-spline knot to endpoint tangency was applied instead. - - + + Wrong number of selected objects! El nombre d'objectes seleccionats és incorrecte. - - + + With 3 objects, there must be 2 curves and 1 point. Amb 3 objectes, hi ha d'haver 2 corbes i 1 punt. - - - - - - + + + + + + Select one or more arcs or circles from the sketch. Seleccioneu un o diversos arcs o cercles de l'esbós - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - - + + + Constraint only applies to arcs or circles. La restricció només s'aplica a arcs i cercles. - - + + Select one or two lines from the sketch. Or select two edges and a point. Seleccioneu una o dues línies de l'esbós. O seleccioneu dues arestes i un punt @@ -3008,88 +3011,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Una restricció d'angle no es pot definir per dues línies paral·leles. - + Cannot add an angle constraint on an axis! No es pot afegir una restricció d'angle sobre un eix. - + Select two edges from the sketch. Seleccioneu dues arestes de l'esbós - + Select two or more compatible edges. Select two or more compatible edges. - + Sketch axes cannot be used in equality constraints. Sketch axes cannot be used in equality constraints. - + Equality for B-spline edge currently unsupported. La igualtat per a la vora del B-spline no s'admet actualment. - - - + + + Select two or more edges of similar type. Select two or more edges of similar type. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. Seleccioneu de l'esbós dos punts i una línia de simetria, dos punts i un punt de simetria o una línia i un punt de simetria - - + + Cannot add a symmetry constraint between a line and its end points. Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! No es pot afegir una restricció de simetria entre una línia i els seus extrems. - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. - + Selected objects are not just geometry from one sketch. Els objectes seleccionats no són només geometria d'un esbós. - + Cannot create constraint with external geometry only. Cannot create constraint with external geometry only. - + Incompatible geometry is selected. Incompatible geometry is selected. + - - - - + + + Select constraints from the sketch. Select constraints from the sketch. @@ -3111,9 +3114,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Error del nucli del CAD @@ -3189,69 +3192,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. Seleccioneu elements d'un únic esbós - + No constraint selected No s'ha seleccionat cap restricció. - + At least one constraint must be selected S'ha de seleccionar com a mínim una restricció. - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. Una construcció simètrica necessita com a mínim dos elements geomètrics, l'últim element geomètric és la referència per a la construcció de la simetria. - + The last element must be a point or a line serving as reference for the symmetry construction. L'últim element ha de ser un punt o una línia que servisca com a referència per a la construcció de la simetria. - - + + A copy requires at least one selected non-external geometric element Una còpia necessita com a mínim que se seleccione un element geomètric no extern - + Delete All Geometry Suprimeix tota la Geometria - + Are you really sure you want to delete all geometry and constraints? Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints Suprimeix totes les restriccions - + Are you really sure you want to delete all the constraints? Esteu realment segur que voleu suprimir totes restriccions? - + Removal of axes alignment requires at least one selected non-external geometric element Removal of axes alignment requires at least one selected non-external geometric element @@ -3332,6 +3335,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3642,12 +3650,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Length: - + Refractive index ratio Índex de refracció - + Ratio n2/n1: Relació n2/n1: @@ -4060,13 +4068,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - Crea una matriu + Create regular polygon + Crea un polígon regular - Number of Sides: - Nombre de costats: + Number of sides: + Number of sides: @@ -5062,112 +5070,112 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch L'esbós no és vàlid. - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. L'esbós no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch L'esbós és buit. - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: Under constrained: - + %n DoF(s) %n DoF(s) @@ -5175,7 +5183,7 @@ This is done by analyzing the sketch geometries and constraints. - + Fully constrained Fully constrained @@ -5246,8 +5254,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point Crea un clon de la geometria prenent com a referència l'últim punt seleccionat. @@ -5255,17 +5263,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone Clona - + Copy Copia - + Move Mou @@ -5273,8 +5281,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc Fixa el diàmetre d'un cercle o d'un arc @@ -5282,8 +5290,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc Fix the radius/diameter of a circle or an arc @@ -5291,8 +5299,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -5300,8 +5308,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point Crea una còpia simple de la geometria prenent com a referència l'últim punt seleccionat. @@ -5586,8 +5594,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point Mou la geometria prenent com a referència l'últim punt seleccionat @@ -5910,7 +5918,7 @@ L'algoritme Eigen Sparse QR està optimitzat per a matrius escasses; generalment ViewProviderSketch - + and %1 more and %1 more @@ -6140,64 +6148,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error Error - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection La selecció no és vàlida. - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6207,18 +6216,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6258,8 +6267,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6315,16 +6324,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6359,9 +6369,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6415,6 +6425,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6614,12 +6629,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius Restricció del radi - + Fix the radius of a circle or an arc Fixa el radi d'un cercle o arc @@ -6736,12 +6751,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6874,12 +6889,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident Restricció coincident - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6887,12 +6902,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7208,12 +7223,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7221,12 +7236,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7234,12 +7249,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7247,14 +7262,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 34bfabcb36..eaa2083c65 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone 克隆 - + Creates a clone of the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何形状进行含约束连动的复制 @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle 约束圆弧或圆 - + Constrain an arc or a circle 约束圆弧或圆 - + Constrain radius 半径约束 - + Constrain diameter 约束直径 - + Constrain auto radius/diameter 约束自动半径/直径 @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone 克隆 - + Creates a clone of the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何形状进行含约束连动的复制 @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle 角度约束 - + Fix the angle of a line or the angle between two lines 固定一直线角度或两直线夹角 @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident 重合约束 - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses 在点之间创建重合约束，或在圆、弧和椭圆之间的同心约束 @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter 约束直径 - + Fix the diameter of a circle or an arc 固定圆或圆弧的直径 @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance 距离约束 - + Fix a length of a line or the distance between a line and a vertex or between two circles 固定一条直线的长度，或者直线到一个顶点、两个圆之间的距离 @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance 水平距离约束 - + Fix the horizontal distance between two points or line ends 固定两点(或线端点)之间的水平距离 @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance 限制垂直距离 - + Fix the vertical distance between two points or line ends 固定两点(或线端点)之间的垂直距离 @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal 相等约束 - + Create an equality constraint between two lines or between circles and arcs 两直线或圆与圆弧间创建相等约束 @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel 平行约束 - + Create a parallel constraint between two lines 两条线之间创建平行约束 @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular 垂直约束 - + Create a perpendicular constraint between two lines 为两条直线创建垂直约束 @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object 点约束至对象 - + Fix a point onto an object 固定点至对象 @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter 约束自动半径/直径 - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen 如果选中了圆，则固定直径，如果选中了圆弧/样条 极点，则固定半径 @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) 折射约束 (斯涅尔定律) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. 通过指定两光线端点和一条边作为折射界面创建折射约束（斯涅尔定律） @@ -585,12 +585,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical 对称约束 - + Create a symmetry constraint between two points with respect to a line or a third point 对两点作关于一条直线或第三点的对称约束 @@ -599,12 +599,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent 相切约束 - + Create a tangent constraint between two entities 在两实体间创建相切约束 @@ -638,12 +638,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy 复制 - + Creates a simple copy of the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何图形进行不含约束连动的复制 @@ -1028,12 +1028,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints 删除所有约束 - + Delete all constraints in the sketch 删除草图中的所有约束 @@ -1041,12 +1041,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry 删除所有几何图形 - + Delete all geometry and constraints in the current sketch, with the exception of external geometry 删除当前草图中的所有几何图形和约束，外部几何图形除外 @@ -1228,12 +1228,12 @@ as mirroring reference. CmdSketcherMove - + Move 移动 - + Moves the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何形状进行移动 @@ -1254,12 +1254,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array 矩形阵列 - + Creates a rectangular array pattern of the geometry taking as reference the last selected point 以最后所选的点作为参考，创建图形的长方形阵列 @@ -1267,12 +1267,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment 移除轴对齐 - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection 修改删除轴对齐约束，以保留所选部分的约束关系 @@ -1295,12 +1295,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry 显示/隐藏内部几何形状 - + Show all internal geometry or hide unused internal geometry 显示所有内部几何体或隐藏未使用的内部几何体 @@ -1308,8 +1308,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints 选择相冲突的约束 @@ -1317,12 +1317,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints 选择关联的约束 - + Select the constraints associated with the selected geometrical elements 选择与选定几何元素关联的约束 @@ -1330,12 +1330,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry 选择关联的几何体 - + Select the geometrical elements associated with the selected constraints 选择与所选约束相关的几何元素 @@ -1343,12 +1343,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF 选择未约束的自由度 - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. 选择求解器仍检测为无约束自由度的元素。 @@ -1356,12 +1356,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis 选择水平轴 - + Select the local horizontal axis of the sketch 选择草图的局部水平轴 @@ -1369,8 +1369,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints 选择流型的约束 @@ -1378,12 +1378,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin 选择原点 - + Select the local origin point of the sketch 选择草图的局部原点 @@ -1391,8 +1391,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints 选择部分冗余约束 @@ -1400,8 +1400,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints 选择冗余约束 @@ -1409,12 +1409,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis 选择垂直轴 - + Select the local vertical axis of the sketch 选择草图的局部垂直轴 @@ -1461,12 +1461,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry 对称 - + Creates symmetric geometry with respect to the last selected line or point 建立几何对称，并以最后一个选择的点或线为对称轴 @@ -1474,12 +1474,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint 激活/停用约束 - + Activates or deactivates the selected constraints 激活或停用选定的约束 @@ -1500,12 +1500,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint 切换驱动/参考约束 - + Set the toolbar, or the selected constraints, into driving or reference mode 设置工具栏或选定的约束， @@ -1593,54 +1593,54 @@ invalid constraints, degenerated geometry, etc. 添加固定约束 - + Add 'Block' constraint 添加“块”约束 - + Add block constraint 添加块约束 - - + + Add coincident constraint 添加并发约束 - - + + Add distance from horizontal axis constraint 从水平轴约束添加距离 - - + + Add distance from vertical axis constraint 从垂直轴约束添加距离 - - + + Add point to point distance constraint 添加点到点距离约束 - - + + Add point to line Distance constraint 添加点到线距离约束 - - + + Add circle to circle distance constraint 添加圆到圆距离约束 - + Add circle to line distance constraint 添加圆到线距离约束 @@ -1649,8 +1649,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint 添加长度约束 @@ -1772,159 +1772,159 @@ invalid constraints, degenerated geometry, etc. 添加y距离约束 - + Add point to circle Distance constraint 添加点到圆距离约束 - - + + Add point on object constraint 添加对象上点约束 - - + + Add point to point horizontal distance constraint 添加点到点水平距离约束 - + Add fixed x-coordinate constraint 添加固定x坐标约束 - - + + Add point to point vertical distance constraint 添加点到点垂直距离约束 - + Add fixed y-coordinate constraint 添加固定Y坐标约束 - - + + Add parallel constraint 添加平行约束 - - - - - - - + + + + + + + Add perpendicular constraint 添加垂直约束 - + Add perpendicularity constraint 添加垂直约束 - + Swap coincident+tangency with ptp tangency 切换边相切与ptp相切 - + Swap PointOnObject+tangency with point to curve tangency 将点与对象相切与点到曲线相切交换 - - - - - - - + + + + + + + Add tangent constraint 添加切线约束 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point 添加正切约束点 - - - - + + + + Add radius constraint 添加半径约束 - - - - + + + + Add diameter constraint 添加直径约束 - - - - + + + + Add radiam constraint 添加半径约束 - - - - + + + + Add angle constraint 添加角度约束 - - + + Add equality constraint 添加相等约束 - - - - - + + + + + Add symmetric constraint 添加对称约束 - + Add Snell's law constraint 添加斯内尔定律约束 - + Toggle constraint to driving/reference 将约束切换到作用/参考 - + Activate/Deactivate constraint 激活/停用约束 @@ -2095,47 +2095,47 @@ invalid constraints, degenerated geometry, etc. 连接曲线 - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry 暴露内部几何元素 - + Create symmetric geometry 创建对称几何图形 - + Copy/clone/move geometry 复制/克隆/移动几何体 - + Create copy of geometry 创建几何形状副本 - + Delete all geometry 删除所有几何图形 - + Delete All Constraints 删除所有约束 - + Remove Axes Alignment 删除轴对齐 @@ -2153,8 +2153,8 @@ invalid constraints, degenerated geometry, etc. 更新约束的虚拟空间 - + Add auto constraints 添加自动约束 @@ -2169,22 +2169,22 @@ invalid constraints, degenerated geometry, etc. 重命名草图约束 - + Drag Point 拖动点 - + Drag Curve 拖动曲线 - + Drag Constraint 拖动约束 - + Modify sketch constraints 修改草图约束 @@ -2223,6 +2223,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2327,16 +2332,16 @@ invalid constraints, degenerated geometry, etc. 不能在B样条参数范围之外插入节点。 - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range 工具小部件参数索引超出范围 @@ -2402,20 +2407,8 @@ invalid constraints, degenerated geometry, etc. 不要附加 - - - - - - - - - - - - @@ -2426,133 +2419,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection 选择错误 @@ -2627,8 +2631,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint 双重约束 @@ -2644,8 +2648,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! 所选边已有块约束! @@ -2657,7 +2661,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. 从草绘选择顶点。 @@ -2682,29 +2686,29 @@ invalid constraints, degenerated geometry, etc. 如果草图未解决或有多余且相互冲突的约束，无法添加方块约束。 - + Select one edge from the sketch. 从草绘中选取一个边。 - + Select only edges from the sketch. 仅从草绘中选择边。 - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 选中对象的数目不是 3 + - Error 错误 @@ -2719,75 +2723,75 @@ invalid constraints, degenerated geometry, etc. 选中的项目不能接受水平或垂直约束！ - + Endpoint to endpoint tangency was applied instead. 已应用端点到端点相切作为替代方案。 - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. 从草图中选择两个或多个顶点以获取共一事件约束， 或两个或多个圆、椭圆、圆弧或椭圆的圆弧，以求达到一个精度限制。 - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. 从草图中选择两个顶点用于一个共事件约束，或两个圆圈、椭圆、弧或椭圆的圆形，用于一个精度限制。 - + Select exactly one line or one point and one line or two points from the sketch. 从草图仅选取一直线, 或一点和一直线, 或两点. - + Cannot add a length constraint on an axis! 无法在坐标轴上添加长度约束! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. 从草图中只选择一条直线或一条直线或两个点或两个圆。 - + This constraint does not make sense for non-linear curves. 此约束不适用于非线性曲线. - + Endpoint to edge tangency was applied instead. 使用边缘切线的端点。 - - - - - - + + + + + + Select the right things from the sketch. 从草绘选择正确的对象。 - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. 选择非B样条重量的边缘。 @@ -2797,93 +2801,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. 选定的点中没有一个被限制在各自的曲线上，因为它们是同一个元素的一部分。 因为它们既是外部几何形状，也是因为边缘不符合资格。 - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 所选的点没有一个被约束到各自的曲线上，因为它们是在同一元素上的一部分，或是它们都是外部几何形状。 - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. 从草图选择一根线或两个点. - + Cannot add a horizontal length constraint on an axis! 无法在坐标轴上添加水平长度约束! - + Cannot add a fixed x-coordinate constraint on the origin point! 无法于原点加入固定x座标的约束! - - + + This constraint only makes sense on a line segment or a pair of points. 这种限制只对直线段或两点有意义。 - + Cannot add a vertical length constraint on an axis! 无法在坐标轴上添加垂直长度约束! - + Cannot add a fixed y-coordinate constraint on the origin point! 无法于原点加入固定y座标的约束! - + Select two or more lines from the sketch. 从草图选择两条或两条以上直线. - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. 至少从草图选择两直线. - - Select a valid line. - 选择一条有效的直线 - - - - + The selected edge is not a valid line. 选中的边缘不是一个有效线。 - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2893,35 +2896,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 接受的组合: 两条曲线; 一个端点和一个曲线; 两个端点; 两条曲线和一个点。 - + Select some geometry from the sketch. perpendicular constraint 从草图中选取一些几何属性 - - + + Cannot add a perpendicularity constraint at an unconnected point! 不能对没有连接点的两条线段添加"垂直"约束 - - + + One of the selected edges should be a line. 所选边之一须为直线. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 已应用端点到端点相切。已删除重合约束。 - + Endpoint to edge tangency was applied. The point on object constraint was deleted. 边缘切线端点已应用。对象约束上的点已删除。 - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2931,67 +2934,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 接受的组合: 两条曲线; 一个端点和一个曲线; 两个端点; 两条曲线和一个点。 - + Select some geometry from the sketch. tangent constraint 从草图中选取一些几何属性 - - - + + + Cannot add a tangency constraint at an unconnected point! 不能对没有连接点的两条线段添加"相切"约束 - - + + Tangent constraint at B-spline knot is only supported with lines! B-样条节点的切约束只支持直线！ - + B-spline knot to endpoint tangency was applied instead. 代之以使用 B-样条至端点切换。 - - + + Wrong number of selected objects! 选取对象的数量有误! - - + + With 3 objects, there must be 2 curves and 1 point. 3个对象时至少需有2条曲线及1个点。 - - - - - - + + + + + + Select one or more arcs or circles from the sketch. 从草图中选择一个或多个弧或圆。 - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. 只从草图中选择一个或多个B-Spline柱，或只选择一个或多个弧或圆，但不混合。 - - - + + + Constraint only applies to arcs or circles. 约束只适用于圆弧或圆。 - - + + Select one or two lines from the sketch. Or select two edges and a point. 从草图中选择一或两条直线。或选择两条边和一个点。 @@ -3006,88 +3009,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 不能为两条平行线设置角度约束。 - + Cannot add an angle constraint on an axis! 无法在坐标轴上添加角度约束! - + Select two edges from the sketch. 从草图选择两条边. - + Select two or more compatible edges. 选择两个或更多兼容的边缘。 - + Sketch axes cannot be used in equality constraints. 草图轴无法用于相等约束. - + Equality for B-spline edge currently unsupported. 目前不支持贝塞尔曲线条边缘的等值约束。 - - - + + + Select two or more edges of similar type. 选择两个或多个相似类型的边缘。 - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 请从草图中选取2个点及对称线, 2个点及对称点或1条线及1对称点。 - - + + Cannot add a symmetry constraint between a line and its end points. 无法在行和端点之间添加对称约束。 - - + + Cannot add a symmetry constraint between a line and its end points! 无法在直线及其端点间添加对称约束! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 选取线段的两个端点做为射线，以及一条边缘做为边界，先选的点会编号为n1，后选的点则编号为n2，基准值设定为n2/n1。 - + Selected objects are not just geometry from one sketch. 选取的物件并非来自于草图的几何形状。 - + Cannot create constraint with external geometry only. 无法仅通过外部几何图形创建约束 - + Incompatible geometry is selected. 选取了不相容的几何图形. + - - - - + + + Select constraints from the sketch. 从草图中选择约束。 @@ -3109,9 +3112,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 定義 B 雲形線多項式次數，介於 1 及 %1 之間： - + CAD Kernel Error CAD 内核错误 @@ -3187,69 +3190,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 应选择两个终点，或共用点。 - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. 由单一草图中选择元素。 - + No constraint selected 没有约束被选定 - + At least one constraint must be selected 至少选择一个约束 - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. 一个对称构造需要至少两个几何元素，最后选定的几何元素是对称构造的参照元素。 - + The last element must be a point or a line serving as reference for the symmetry construction. 作为对称构造的参考基准，最后选定的元素必须是一个点或者一条直线。 - - + + A copy requires at least one selected non-external geometric element 复制操作需要至少一个被选定的非外部几何元素。 - + Delete All Geometry 删除所有几何图形 - + Are you really sure you want to delete all geometry and constraints? 您确定要删除所有几何形状和限制吗？ - + Delete All Constraints 删除所有约束 - + Are you really sure you want to delete all the constraints? 是否确实要删除所有约束？ - + Removal of axes alignment requires at least one selected non-external geometric element 移除轴对齐需要至少一个选定的非外部几何元素 @@ -3330,6 +3333,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3640,12 +3648,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 长度: - + Refractive index ratio 折射率比 - + Ratio n2/n1: 比例 n2/n1: @@ -4058,13 +4066,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - 创建阵列 + Create regular polygon + 创建正多边形 - Number of Sides: - 边数 + Number of sides: + Number of sides: @@ -5068,119 +5076,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch 编辑草绘 - + A dialog is already open in the task panel 一个对话框已在任务面板打开 - + Do you want to close this dialog? 您要关闭此对话框吗? - + Invalid sketch 无效的草图 - + Do you want to open the sketch validation tool? 你想打开草图验证工具么？ - + The sketch is invalid and cannot be edited. 该草图不可用并不可编辑。 - + Please remove the following constraint: 请删除以下约束: - + Please remove at least one of the following constraints: 请至少删除以下约束之一: - + Please remove the following redundant constraint: 请删除以下冗余约束: - + Please remove the following redundant constraints: 请删除以下冗余约束: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch 空草图 - + Over-constrained: Over-constrained: - + Malformed constraints: Malformed constraints: - + Redundant constraints: Redundant constraints: - + Partially redundant: Partially redundant: - + Solver failed to converge Solver failed to converge - + Under constrained: 未约束的： - + %n DoF(s) %n个自由度 - + Fully constrained Fully constrained @@ -5251,8 +5259,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何形状进行含约束连动的复制 @@ -5260,17 +5268,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone 克隆 - + Copy 复制 - + Move 移动 @@ -5278,8 +5286,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 固定圆或圆弧的直径 @@ -5287,8 +5295,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc 固定圆或圆弧的半径/直径 @@ -5296,8 +5304,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 固定圆或圆弧的半径 @@ -5305,8 +5313,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何图形进行不含约束连动的复制 @@ -5592,8 +5600,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point 依最后所选的点作为参考点对几何形状进行移动 @@ -5917,7 +5925,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster ViewProviderSketch - + and %1 more and %1 more @@ -6147,64 +6155,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error 错误 - + Failed to delete all geometry Failed to delete all geometry - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection 无效选择 - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6214,18 +6223,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6265,8 +6274,8 @@ The grid spacing change if it becomes smaller than this number of pixel.Error creating B-spline pole - + Error creating B-spline Error creating B-spline @@ -6322,16 +6331,17 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to add line - - - - - - - - + + + + + + + + + Tool execution aborted 工具执行中止 @@ -6366,9 +6376,9 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to trim edge + - Value Error Value Error @@ -6422,6 +6432,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6621,12 +6636,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius 半径约束 - + Fix the radius of a circle or an arc 固定圆或圆弧的半径 @@ -6743,12 +6758,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. 偏移选定几何形状。正偏移长度使偏移向外延，向内倾斜。 @@ -6881,12 +6896,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident 重合约束 - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6894,12 +6909,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7216,12 +7231,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7229,12 +7244,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7242,12 +7257,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7255,14 +7270,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 23ae99e57a..0b121d8e35 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -82,12 +82,12 @@ CmdSketcherClone - + Clone 複製 - + Creates a clone of the geometry taking as reference the last selected point 依最後所選的點作為參考點對幾何進行含拘束連動之複製 @@ -128,27 +128,27 @@ CmdSketcherCompConstrainRadDia - + Constrain arc or circle 約束弧或圓的直/半徑 - + Constrain an arc or a circle 約束單一圓弧或圓的直/半徑 - + Constrain radius 半徑拘束 - + Constrain diameter 直徑拘束 - + Constrain auto radius/diameter 自動拘束半徑/直徑 @@ -156,12 +156,12 @@ CmdSketcherCompCopy - + Clone 複製 - + Creates a clone of the geometry taking as reference the last selected point 依最後所選的點作為參考點對幾何進行含拘束連動之複製 @@ -388,12 +388,12 @@ CmdSketcherConstrainAngle - + Constrain angle 角度拘束 - + Fix the angle of a line or the angle between two lines 固定線之角度或兩線間角度 @@ -414,12 +414,12 @@ CmdSketcherConstrainCoincident - + Constrain coincident 共點拘束 - + Create a coincident constraint between points, or a concentric constraint between circles, arcs, and ellipses 在點之間創建重合拘束，或在圓、弧和橢圓之間創建同心拘束 @@ -427,12 +427,12 @@ CmdSketcherConstrainDiameter - + Constrain diameter 直徑拘束 - + Fix the diameter of a circle or an arc 固定一個圓或弧的直徑 @@ -440,12 +440,12 @@ CmdSketcherConstrainDistance - + Constrain distance 距離拘束 - + Fix a length of a line or the distance between a line and a vertex or between two circles Fix a length of a line or the distance between a line and a vertex or between two circles @@ -453,12 +453,12 @@ CmdSketcherConstrainDistanceX - + Constrain horizontal distance 水平距離拘束 - + Fix the horizontal distance between two points or line ends 固定兩點或線段的水平距離 @@ -466,12 +466,12 @@ CmdSketcherConstrainDistanceY - + Constrain vertical distance 垂直距離拘束 - + Fix the vertical distance between two points or line ends 固定兩點或線段的垂直距離 @@ -479,12 +479,12 @@ CmdSketcherConstrainEqual - + Constrain equal 相等拘束 - + Create an equality constraint between two lines or between circles and arcs 於兩線/圓/弧之間建立相等拘束 @@ -519,12 +519,12 @@ on the selected vertex CmdSketcherConstrainParallel - + Constrain parallel 平行拘束 - + Create a parallel constraint between two lines 於兩條線間建立平行拘束 @@ -532,12 +532,12 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Constrain perpendicular 垂直拘束 - + Create a perpendicular constraint between two lines 於兩條線間建立垂直拘束 @@ -545,12 +545,12 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Constrain point onto object 拘束點於物件上 - + Fix a point onto an object 固定點於物件上 @@ -558,12 +558,12 @@ on the selected vertex CmdSketcherConstrainRadiam - + Constrain auto radius/diameter 自動拘束半徑/直徑 - + Fix the diameter if a circle is chosen, or the radius if an arc/spline pole is chosen 如果選擇圓，則固定直徑，如果選擇圓弧/spline 極點，則固定半徑 @@ -571,12 +571,12 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Constrain refraction (Snell's law) Constrain refraction (Snell's law) - + Create a refraction law (Snell's law)constraint between two endpoints of rays and an edge as an interface. Create a refraction law (Snell's law)constraint between two endpoints of rays @@ -586,12 +586,12 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Constrain symmetrical 對稱拘束 - + Create a symmetry constraint between two points with respect to a line or a third point 於兩個點間藉由一條線或第3點建立一個對稱拘束 @@ -600,12 +600,12 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Constrain tangent 相切拘束 - + Create a tangent constraint between two entities 於兩個實體間建立相切拘束 @@ -639,12 +639,12 @@ with respect to a line or a third point CmdSketcherCopy - + Copy 複製 - + Creates a simple copy of the geometry taking as reference the last selected point 依最後所選的點作為參考點對幾何進行不含拘束連動之複製 @@ -1029,12 +1029,12 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Delete all constraints 刪除所有拘束 - + Delete all constraints in the sketch 刪除此草圖中所有拘束 @@ -1042,12 +1042,12 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Delete all geometry 刪除所有幾何圖形 - + Delete all geometry and constraints in the current sketch, with the exception of external geometry 刪除當前草圖中的所有幾何圖形和約束，外部幾何圖形除外 @@ -1229,12 +1229,12 @@ as mirroring reference. CmdSketcherMove - + Move 移動 - + Moves the geometry taking as reference the last selected point 以最後選擇的點為基準移動圖元 @@ -1255,12 +1255,12 @@ as mirroring reference. CmdSketcherRectangularArray - + Rectangular array 矩形陣列 - + Creates a rectangular array pattern of the geometry taking as reference the last selected point 以最後選擇的點為基準建立矩形陣列 @@ -1268,12 +1268,12 @@ as mirroring reference. CmdSketcherRemoveAxesAlignment - + Remove axes alignment 移除軸對齊 - + Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection 修改拘束以移除軸對齊，在此同時試著保留選擇間拘束的關係。 @@ -1296,12 +1296,12 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Show/hide internal geometry 顯示/隱藏內部幾何 - + Show all internal geometry or hide unused internal geometry 顯示所有幾何或隱藏未使用的內部幾何 @@ -1309,8 +1309,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConflictingConstraints - + Select conflicting constraints 選取有矛盾之拘束 @@ -1318,12 +1318,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectConstraints - + Select associated constraints 選取有關聯之拘束 - + Select the constraints associated with the selected geometrical elements 選擇與選定幾何元件關聯的拘束 @@ -1331,12 +1331,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Select associated geometry 選擇有關聯之幾何 - + Select the geometrical elements associated with the selected constraints 選擇與選定拘束關聯的幾何元件 @@ -1344,12 +1344,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Select unconstrained DoF 選擇未拘束之 DoF (自由度) - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. 選擇幾何元件其求解器仍然可以偵測沒被拘束到的自由度。 @@ -1357,12 +1357,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectHorizontalAxis - + Select horizontal axis 選擇水平軸 - + Select the local horizontal axis of the sketch 選擇草圖的局部水平軸 @@ -1370,8 +1370,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectMalformedConstraints - + Select malformed constraints 選擇格式錯誤的拘束 @@ -1379,12 +1379,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectOrigin - + Select origin 選取原點 - + Select the local origin point of the sketch 選擇草圖的局部原點 @@ -1392,8 +1392,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectPartiallyRedundantConstraints - + Select partially redundant constraints 選取部份冗餘拘束 @@ -1401,8 +1401,8 @@ This will clear the 'Support' property, if any. CmdSketcherSelectRedundantConstraints - + Select redundant constraints 選取冗餘拘束 @@ -1410,12 +1410,12 @@ This will clear the 'Support' property, if any. CmdSketcherSelectVerticalAxis - + Select vertical axis 選取垂直軸 - + Select the local vertical axis of the sketch 選擇草圖的局部垂直軸 @@ -1462,12 +1462,12 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Symmetry 對稱 - + Creates symmetric geometry with respect to the last selected line or point 建立幾何對稱，並以最後一個選擇之點或線為對稱軸 @@ -1475,12 +1475,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Activate/deactivate constraint 啟動/關閉拘束 - + Activates or deactivates the selected constraints 啟用或關閉選擇拘束 @@ -1501,12 +1501,12 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Toggle driving/reference constraint 切換驅動/參考拘束 - + Set the toolbar, or the selected constraints, into driving or reference mode 設置工具列，或選定的拘束，進入驅動或參考模式 @@ -1593,54 +1593,54 @@ invalid constraints, degenerated geometry, etc. 添加固定拘束 - + Add 'Block' constraint 添加定位拘束 - + Add block constraint 添加定位拘束 - - + + Add coincident constraint 添加共點約束 - - + + Add distance from horizontal axis constraint 添加與水平軸拘束的距離 - - + + Add distance from vertical axis constraint 添加與垂直軸拘束的距離 - - + + Add point to point distance constraint 添加點到點的距離約束 - - + + Add point to line Distance constraint 添加點到線的距離約束 - - + + Add circle to circle distance constraint 添加圓到圓的距離約束 - + Add circle to line distance constraint 添加圓到線的距離約束 @@ -1649,8 +1649,8 @@ invalid constraints, degenerated geometry, etc. - - + + Add length constraint 添加長度拘束 @@ -1772,159 +1772,159 @@ invalid constraints, degenerated geometry, etc. 添加 Y 距離拘束 - + Add point to circle Distance constraint Add point to circle Distance constraint - - + + Add point on object constraint 在物件拘束上添加點 - - + + Add point to point horizontal distance constraint 添加點到點的水平距離約束 - + Add fixed x-coordinate constraint 添加固定的 x 座標拘束 - - + + Add point to point vertical distance constraint 添加點到點的垂直距離約束 - + Add fixed y-coordinate constraint 添加固定的 y 座標拘束 - - + + Add parallel constraint 添加平行拘束 - - - - - - - + + + + + + + Add perpendicular constraint 添加垂直拘束 - + Add perpendicularity constraint 添加垂直度拘束 - + Swap coincident+tangency with ptp tangency 以 ptp 相切交換共點+相切 - + Swap PointOnObject+tangency with point to curve tangency 以點對曲線相切交換物件上點(PoingOnObject)+相切 - - - - - - - + + + + + + + Add tangent constraint 添加切線拘束 - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point 添加切線拘束點 - - - - + + + + Add radius constraint 添加半徑拘束 - - - - + + + + Add diameter constraint 添加直徑拘束 - - - - + + + + Add radiam constraint 添加半徑拘束 - - - - + + + + Add angle constraint 添加角度拘束 - - + + Add equality constraint 添加相等拘束 - - - - - + + + + + Add symmetric constraint 添加對稱拘束 - + Add Snell's law constraint 添加司乃耳定律拘束 - + Toggle constraint to driving/reference 切換拘束以作驅動/參考 - + Activate/Deactivate constraint 啟動/關閉拘束 @@ -2095,47 +2095,47 @@ invalid constraints, degenerated geometry, etc. 連接曲線 - + Cut in Sketcher Cut in Sketcher - + Paste in Sketcher Paste in Sketcher - + Exposing Internal Geometry 暴露內部幾何 - + Create symmetric geometry 創建對稱幾何 - + Copy/clone/move geometry 拷貝/複製/移動 幾何 - + Create copy of geometry 建立幾何的拷貝 - + Delete all geometry 刪除所有幾何圖形 - + Delete All Constraints 刪除所有拘束 - + Remove Axes Alignment 移除軸對齊 @@ -2153,8 +2153,8 @@ invalid constraints, degenerated geometry, etc. 更新拘束的虛擬空間 - + Add auto constraints 添加自動拘束 @@ -2169,22 +2169,22 @@ invalid constraints, degenerated geometry, etc. 重新命名草圖拘束 - + Drag Point 拖曳點 - + Drag Curve 拖曳曲線 - + Drag Constraint 拖動拘束 - + Modify sketch constraints 修改草圖拘束 @@ -2223,6 +2223,11 @@ invalid constraints, degenerated geometry, etc. Scale geometries Scale geometries + + + Translate geometries + Translate geometries + CommandGroup @@ -2327,16 +2332,16 @@ invalid constraints, degenerated geometry, etc. 結點不能在 B 雲形線參數範圍外面插入 - - - - - - - - - - + + + + + + + + + + ToolWidget parameter index out of range ToolWidget parameter index out of range @@ -2402,20 +2407,8 @@ invalid constraints, degenerated geometry, etc. 不要附加上去 - - - - - - - - - - - - @@ -2426,133 +2419,144 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection 錯誤的選取 @@ -2627,8 +2631,8 @@ invalid constraints, degenerated geometry, etc. - - + + Double constraint 雙重拘束 @@ -2644,8 +2648,8 @@ invalid constraints, degenerated geometry, etc. - - + + The selected edge already has a Block constraint! 所選邊線已套用定位拘束! @@ -2657,7 +2661,7 @@ invalid constraints, degenerated geometry, etc. - + Select vertices from the sketch. 從草圖中選取頂點 @@ -2682,29 +2686,29 @@ invalid constraints, degenerated geometry, etc. 如果草圖中的求解器無法解出或存在冗餘、衝突的約束，則不能再添加定位約束。 - + Select one edge from the sketch. 從草圖中選取一邊線 - + Select only edges from the sketch. 僅有邊線能從草圖中被選取 - + Only tangent-via-point is supported with a B-spline. Only tangent-via-point is supported with a B-spline. - + Number of selected objects is not 3 選取之物件數量非為3 + - Error 錯誤 @@ -2719,75 +2723,75 @@ invalid constraints, degenerated geometry, etc. 所選項目無法接受水平或垂直拘束！ - + Endpoint to endpoint tangency was applied instead. 已被取代為終點對終點相切 - + Select two or more vertices from the sketch for a coincident constraint, or two or more circles, ellipses, arcs or arcs of ellipse for a concentric constraint. 要創建一個重合拘束，請在草圖中選擇兩個或多個頂點，或者要創建同心拘束，請選擇兩個或多個圓、橢圓、弧或橢圓弧。 - + Select two vertices from the sketch for a coincident constraint, or two circles, ellipses, arcs or arcs of ellipse for a concentric constraint. 選擇草圖中的兩個頂點以創建重合拘束，或者選擇兩個圓、橢圓、弧或橢圓弧以創建同心拘束。 - + Select exactly one line or one point and one line or two points from the sketch. 由草圖中選取一條線或一個點,以及一條線或兩個點。 - + Cannot add a length constraint on an axis! 無法於軸上增加長度拘束! - - + + Select exactly one line or one point and one line or two points or two circles from the sketch. Select exactly one line or one point and one line or two points or two circles from the sketch. - + This constraint does not make sense for non-linear curves. 此拘束條件在非線性曲線上並不合理. - + Endpoint to edge tangency was applied instead. 改為應用端點到邊相切。 - - - - - - + + + + + + Select the right things from the sketch. 從草圖中選取正確的圖元 - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight. 選擇不是 B 雲形線權重的邊 @@ -2797,93 +2801,92 @@ invalid constraints, degenerated geometry, etc. One or two point on object constraint(s) was/were deleted, since the latest constraint being applied internally applies point-on-object as well. - + Select either several points, or several conics for concentricity. Select either several points, or several conics for concentricity. - + Select either one point and several curves, or one curve and several points Select either one point and several curves, or one curve and several points - + Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. Select either one point and several curves or one curve and several points for pointOnObject, or several points for coincidence, or several conics for concentricity. - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. 沒有任何被選擇點被拘束在其個別的曲線上，因為它們是同一個元件的一部份，因為它們都是外部幾何，或是因為其邊不符合條件。 - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. 沒有任何被選擇點被拘束在其個別的曲線上，要麼因為它們都是同一元件的一部份，或是因為他們都是外部幾何。 - + Cannot add a length constraint on this selection! Cannot add a length constraint on this selection! - - - - + + + + Select exactly one line or up to two points from the sketch. 於草圖中選取一條線或最多兩個點。 - + Cannot add a horizontal length constraint on an axis! 無法於軸上增加水平長度拘束! - + Cannot add a fixed x-coordinate constraint on the origin point! 在原點上無法加入固定X軸拘束! - - + + This constraint only makes sense on a line segment or a pair of points. 此拘束只針對線段或是一對點有意義。 - + Cannot add a vertical length constraint on an axis! 無法於軸上增加垂直長度拘束! - + Cannot add a fixed y-coordinate constraint on the origin point! 在原點上無法加入固定Y軸拘束! - + Select two or more lines from the sketch. 由草圖中選取兩條或以上線條。 - - + + One selected edge is not a valid line. + One selected edge is not a valid line. + + + + Select at least two lines from the sketch. 由草圖中選取至少兩條線。 - - Select a valid line. - 選擇一條有效的線。 - - - - + The selected edge is not a valid line. 所選之邊非為有效線段. - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2891,35 +2894,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 此拘束尚有許多方式可以使用，可用的組合有：兩條曲線、兩個端點、兩條曲線及一個點。 - + Select some geometry from the sketch. perpendicular constraint 從草圖中選取一些幾何。 - - + + Cannot add a perpendicularity constraint at an unconnected point! 無法於未連接點上建立垂直拘束! - - + + One of the selected edges should be a line. 所選之邊中需有一條線。 - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. 已套用點對點相切拘束，共點拘束已被刪除 - + Endpoint to edge tangency was applied. The point on object constraint was deleted. 終點到邊已套用相切(拘束)。因此點到物件之拘束被刪除。 - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2929,67 +2932,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 可接受的組合：二條曲線; 一個終止點及一條曲線；二個終主點；二條曲線及一點。 - + Select some geometry from the sketch. tangent constraint 從草圖中選取一些幾何。 - - - + + + Cannot add a tangency constraint at an unconnected point! 無法於未連接點上建立相切拘束! - - + + Tangent constraint at B-spline knot is only supported with lines! 在 B-spline 曲線結點上僅支持與直線的切線拘束！ - + B-spline knot to endpoint tangency was applied instead. 取而代之套用了 B-spline 曲線結點到終點的切線。 - - + + Wrong number of selected objects! 選取之物件數量有誤! - - + + With 3 objects, there must be 2 curves and 1 point. 三個物件時至少需有2條曲線及1個點。 - - - - - - + + + + + + Select one or more arcs or circles from the sketch. 從草圖中選取一個或多個弧或圓。 - - + + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. 從草圖中僅選擇一個或多個 B 雲形線極點或僅選擇一個或多個圓弧或圓，但不要混合。 - - - + + + Constraint only applies to arcs or circles. 拘束僅能用在圓弧或圓上 - - + + Select one or two lines from the sketch. Or select two edges and a point. 從草圖中選取一或兩條線條，或選取兩個邊及一個點。 @@ -3004,88 +3007,88 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 無法於兩條平行線間建立角度拘束。 - + Cannot add an angle constraint on an axis! 無法於軸上建立角度拘束! - + Select two edges from the sketch. 由草圖中選取兩個邊。 - + Select two or more compatible edges. 選擇兩個或更多相容之邊. - + Sketch axes cannot be used in equality constraints. 草圖軸不能用在相等拘束。 - + Equality for B-spline edge currently unsupported. 不支援B雲形線的等長拘束。 - - - + + + Select two or more edges of similar type. 選取兩個或更多相似類型之邊. - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. 請從草圖中選取兩個點及對稱線,兩個點及對稱點或一條線擊對稱點。 - - + + Cannot add a symmetry constraint between a line and its end points. 無法在一條線及其端點間添加對稱拘束。 - - + + Cannot add a symmetry constraint between a line and its end points! 無法於線及其終點建立對稱拘束! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw 選取線段之兩個端點做為光線，以及一個邊緣做為邊界，先選的點會編號為n1，後選的點則編號為n2，基準值設定為n2/n1。 - + Selected objects are not just geometry from one sketch. 選取之物件並非來自於草圖之幾何。 - + Cannot create constraint with external geometry only. 僅用外部幾何無法建立拘束. - + Incompatible geometry is selected. 選取了不相容的幾何. + - - - - + + + Select constraints from the sketch. 從草圖中選取拘束 @@ -3107,9 +3110,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 定義 B 雲形線多項式次數，介於 1 及 %1 之間： - + CAD Kernel Error CAD核心錯誤 @@ -3185,69 +3188,69 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Two end points, or coincident point should be selected. - - - - - - - - - - - - + + + + + + + + + + + + Select elements from a single sketch. 由單一草圖中選擇元件。 - + No constraint selected 尚未選擇拘束 - + At least one constraint must be selected 至少需選取一個拘束 - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. 一個對稱的結構需要至少兩個幾何元件，後一個幾何元件會被作為對稱結構之參考。 - + The last element must be a point or a line serving as reference for the symmetry construction. 產生對稱結構最後一個選擇之元件作為參考必須是點或線 - - + + A copy requires at least one selected non-external geometric element 複製功能須至少選取一個非內部幾何之元件 - + Delete All Geometry 刪除所有圖元 - + Are you really sure you want to delete all geometry and constraints? 你確定要刪除所有幾何圖形及拘束嗎? - + Delete All Constraints 刪除所有拘束 - + Are you really sure you want to delete all the constraints? 確定要刪除所有拘束嗎? - + Removal of axes alignment requires at least one selected non-external geometric element 移除軸對齊需要至少選擇一個非外部幾何元件 @@ -3328,6 +3331,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Scale parameters Scale parameters + + + Translate parameters + Translate parameters + SketcherGui::CarbonCopySelection @@ -3638,12 +3646,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 長度： - + Refractive index ratio 折射率比例 - + Ratio n2/n1: 比例 n2/n1： @@ -4056,13 +4064,13 @@ reflected on copies SketcherGui::SketcherRegularPolygonDialog - Create array - 建立陣列 + Create regular polygon + 建立正多邊形 - Number of Sides: - 多邊形邊數 + Number of sides: + Number of sides: @@ -5061,119 +5069,119 @@ This is done by analyzing the sketch geometries and constraints. SketcherGui::ViewProviderSketch - + Edit sketch 編輯草圖 - + A dialog is already open in the task panel 於工作面板已開啟對話窗 - + Do you want to close this dialog? 您確定要關閉此對話窗嗎? - + Invalid sketch 錯誤之草圖 - + Do you want to open the sketch validation tool? 您要開啟草圖驗證工具嗎? - + The sketch is invalid and cannot be edited. 此為無效且不能編輯之草圖 - + Please remove the following constraint: 請移除下列拘束： - + Please remove at least one of the following constraints: 請移除下列至少一個拘束： - + Please remove the following redundant constraint: 請移除下列多餘拘束： - + Please remove the following redundant constraints: 請移除下列多餘拘束： - + The following constraint is partially redundant: 以下拘束為部份冗餘： - + The following constraints are partially redundant: 以下拘束為部份冗餘： - + Please remove the following malformed constraint: 請移除下列格式錯誤拘束： - + Please remove the following malformed constraints: 請移除下列格式錯誤拘束： - + Empty sketch 空白草圖 - + Over-constrained: 過度拘束： - + Malformed constraints: 格式錯誤的拘束： - + Redundant constraints: 冗餘拘束： - + Partially redundant: 部份冗餘： - + Solver failed to converge 求解器無法收斂 - + Under constrained: 在拘束下： - + %n DoF(s) %n 自由度 - + Fully constrained 完全拘束 @@ -5244,8 +5252,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point 依最後所選的點作為參考點對幾何進行含拘束連動之複製 @@ -5253,17 +5261,17 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_CompCopy - + Clone 複製 - + Copy 複製 - + Move 移動 @@ -5271,8 +5279,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc 固定一個圓或弧的直徑 @@ -5280,8 +5288,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadiam - - + + Fix the radius/diameter of a circle or an arc 固定一個圓或弧的半徑/直徑 @@ -5289,8 +5297,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc 固定圓或弧之半徑 @@ -5298,8 +5306,8 @@ This is done by analyzing the sketch geometries and constraints. Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point 依最後所選的點作為參考點對幾何進行不含拘束連動之複製 @@ -5583,8 +5591,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point 以最後選擇的點為基準移動圖元 @@ -5908,7 +5916,7 @@ Eigen Sparse QR 算法針對稀疏矩陣進行了優化；通常更快 ViewProviderSketch - + and %1 more 還有 %1 個 @@ -6138,64 +6146,65 @@ The grid spacing change if it becomes smaller than this number of pixel. - - - + + + - - - - - - - - - - - - - - - + + - + + + + + + - - - - + + + + + + + + + + + + + Error 錯誤 - + Failed to delete all geometry 刪除所有幾何失敗 - + Failed to delete all constraints Failed to delete all constraints - - + + Invalid selection 無效選擇 - + Selection has no valid geometries. Selection has no valid geometries. - + Selection has no valid geometries. BSplines, Points are not supported yet. Selection has no valid geometries. BSplines, Points are not supported yet. @@ -6205,18 +6214,18 @@ The grid spacing change if it becomes smaller than this number of pixel.The constraint has invalid index information and is malformed. - - - - - - - + + + + + + + Invalid Constraint Invalid Constraint @@ -6256,8 +6265,8 @@ The grid spacing change if it becomes smaller than this number of pixel.建立 B-Spline 曲線極點錯誤 - + Error creating B-spline 建立 B 雲形線錯誤 @@ -6313,16 +6322,17 @@ The grid spacing change if it becomes smaller than this number of pixel.添加線條失敗 - - - - - - - - + + + + + + + + + Tool execution aborted Tool execution aborted @@ -6357,9 +6367,9 @@ The grid spacing change if it becomes smaller than this number of pixel.修剪邊緣失敗 + - Value Error 錯誤的值 @@ -6413,6 +6423,11 @@ The grid spacing change if it becomes smaller than this number of pixel.Failed to scale Failed to scale + + + Failed to translate + Failed to translate + Sketcher_CreateBSplineByInterpolation @@ -6612,12 +6627,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainRadius - + Constrain radius 半徑拘束 - + Fix the radius of a circle or an arc 固定圓或弧之半徑 @@ -6734,12 +6749,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherOffset - + Offset geometry Offset geometry - + Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. Offset selected geometries. A positive offset length makes the offset go outward, a negative length inward. @@ -6872,12 +6887,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherConstrainCoincidentUnified - + Constrain coincident 共點拘束 - + Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses Create a coincident constraint between points, or fix a point on an edge, or a concentric constraint between circles, arcs, and ellipses @@ -6885,12 +6900,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherRotate - + Polar transform Polar transform - + Rotate selected geometries, making n copies, enable creation of circular patterns. Rotate selected geometries, making n copies, enable creation of circular patterns. @@ -7207,12 +7222,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCopyClipboard - + C&opy in sketcher C&opy in sketcher - + Copy selected geometries and constraints to the clipboard Copy selected geometries and constraints to the clipboard @@ -7220,12 +7235,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherCut - + C&ut in sketcher C&ut in sketcher - + Cut selected geometries and constraints to the clipboard Cut selected geometries and constraints to the clipboard @@ -7233,12 +7248,12 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherPaste - + P&aste in sketcher P&aste in sketcher - + Paste selected geometries and constraints from the clipboard Paste selected geometries and constraints from the clipboard @@ -7246,14 +7261,56 @@ Left clicking on empty space will validate the current constraint. Right clickin CmdSketcherScale - + Scale transform Scale transform - + Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). Scale selected geometries. After selecting the center point you can either enter the scale factor, or select two reference points then scale factor = length(p2-center) / length(p1-center). + + CmdSketcherTranslate + + + Array transform + Array transform + + + + Translate selected geometries. Enable creation of i * j copies. + Translate selected geometries. Enable creation of i * j copies. + + + + TaskSketcherTool_c1_translate + + + Clone constraints + Clone constraints + + + + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + This concerns the datum constraints like distances. If you activate Clone, then the tool will copy the datum. Else it will try to replace them with equalities between the initial geometries and the new copies. + + + + TaskSketcherTool_p3_translate + + + Copies (+'U'/-'J') + Copies (+'U'/-'J') + + + + TaskSketcherTool_p5_translate + + + Rows (+'R'/-'F') + Rows (+'R'/-'F') + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts index d0e017efe8..12f3e948f7 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts @@ -349,7 +349,7 @@ Edit cell - Modifier la cellule + Éditer la cellule @@ -449,7 +449,7 @@ L'expression doit être interprétée comme une chaîne de caractères d'une cer Which spread sheet to bind to - A quelle feuille de calcul se lier + La feuille de calcul à laquelle se lier @@ -504,15 +504,14 @@ property for user to dynamically switch configuration. The first row of the range will be bound to whatever row (indirectly) selected by that property. - Adresse de la cellule de démarrage. + Adresse de la cellule de départ. -La première colonne de la plage est supposée contenir une liste de noms -de configuration, qui sera utilisé pour générer une liste de chaînes de caractères et se lier à la propriété -donnée pour que l'utilisateur puisse basculer dynamiquement la configuration. +La première colonne de la plage est supposée contenir une liste de noms de configuration, +qui sera utilisée pour générer une liste de chaînes et la lier à la propriété donnée pour que +l'utilisateur puisse changer dynamiquement de configuration. -La première ligne de l'intervalle sera liée à n'importe quelle ligne (indirectement) sélectionnée -par cette propriété. - +La première ligne de la plage sera liée à n'importe quelle ligne sélectionnée (indirectement) +par cette propriété. @@ -527,13 +526,12 @@ by that property. Adresse de la cellule de fin. -La première colonne de la plage est supposée contenir une liste de noms -de configuration, qui sera utilisé pour générer une liste de chaînes de caractères et se lier à la propriété -donnée pour que l'utilisateur puisse basculer dynamiquement la configuration. +La première colonne de la plage est supposée contenir une liste de noms de configuration, +qui sera utilisé pour générer une liste de chaînes de caractères et se lier à la propriété donnée +pour que l'utilisateur puisse basculer dynamiquement la configuration. La première ligne de l'intervalle sera liée à n'importe quelle ligne (indirectement) sélectionnée -par cette propriété. - +par cette propriété. @@ -544,7 +542,9 @@ par cette propriété. Type in an expression to specify the object and property name to dynamically switch the design configuration. The property will be created if not exist. - Saisissez une expression pour spécifier le nom de l'objet et de la propriété pour changer dynamiquement la configuration de la conception. La propriété sera créée si elle n'existe pas. + Saisir une expression pour spécifier le nom de l'objet et de la propriété. Cela +changera dynamiquement la configuration de la conception. La propriété sera +créée si elle n'existe pas. @@ -554,7 +554,7 @@ switch the design configuration. The property will be created if not exist. Optional property group name. - Nom optionnel du groupe de propriétés. + Nom facultatif du groupe des propriétés. @@ -708,7 +708,7 @@ switch the design configuration. The property will be created if not exist. Sets the Spreadsheet cell(s) foreground color - Définit la couleur de premier plan de la ou des cellules de la feuille de calcul + Définir la couleur de premier plan de la ou des cellules de la feuille de calcul @@ -729,13 +729,14 @@ switch the design configuration. The property will be created if not exist. Alias contains invalid characters! - L'alias contient des caractères invalides! + L'alias contient des caractères invalides ! Refer to cell by alias, for example Spreadsheet.my_alias_name instead of Spreadsheet.B1 - Reportez-vous à la cellule par l'alias, par exemple Spreadsheet.my_alias_name au lieu de Spreadsheet.B1 + La cellule est désignée par un alias, par exemple +Spreadsheet.my_alias_name au lieu de Spreadsheet.B1 @@ -922,7 +923,7 @@ Voulez-vous continuer ? If checked, use the custom presentation to display cell string. - Si cette case est cochée, utiliser la présentation personnalisée pour afficher la chaîne de caractères dans la cellule. + Si cette option est cochée, la présentation personnalisée sera utilisée pour afficher la chaîne de caractères dans la cellule. @@ -1003,7 +1004,7 @@ Par défaut : %V = %A Insert %n row(s) above Insérer %n ligne(s) au-dessus - Insérer %n lignes au-dessus + Insérer %n ligne(s) au-dessus @@ -1019,14 +1020,14 @@ Par défaut : %V = %A Insert %n non-contiguous rows Insérer %n lignes non contiguës - Insérer %n lignes non contiguës + Insérer %n ligne(s) non contiguë(s) Remove row(s) - Supprimer le(s) ligne(s) + Supprimer une ou plusieurs ligne(s) Supprimer le(s) ligne(s) @@ -1058,7 +1059,7 @@ Par défaut : %V = %A Remove column(s) - Supprimer une ou plusieurs colonnes + Supprimer une ou plusieurs colonne(s) Supprimer une ou plusieurs colonnes diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts index ba63d77875..fbeb35c1e3 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts @@ -26,7 +26,7 @@ Activity - Activité + Activités @@ -348,7 +348,7 @@ Show examples folder contents - Afficher le contenu du dossier d'exemples + Afficher le contenu du répertoire des exemples @@ -363,7 +363,7 @@ If this is checked, the latest posts from the FreeCAD forum will be displayed on the Activity tab - Si cette case est cochée, les derniers messages du forum FreeCAD s'afficheront dans l’onglet Activité + Si cette option est cochée, les derniers messages du forum FreeCAD s'afficheront dans l’onglet Activités. @@ -400,7 +400,7 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi The size of file thumbnail icons in recent files and examples sections - La dimension des miniatures des fichiers dans les sections fichiers récents et exemples + La dimension des miniatures des fichiers dans les sections des fichiers récents et exemples @@ -410,12 +410,12 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi File thumbnail size - Dimension des miniatures de fichier + Dimension des miniatures des fichiers Show file thumbnails - Afficher les miniatures de fichiers + Afficher les miniatures des fichiers @@ -465,12 +465,12 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - Si cette case est cochée, et si une feuille de style est spécifiée dans les préférences générales, celle-ci sera utilisée et remplacera les couleurs ci-dessous + Si cette option est cochée, et si une feuille de style est spécifiée dans les préférences générales, celle-ci sera utilisée et remplacera les couleurs ci-dessous. Page background color - Couleur d'arrière-plan de la page + Couleur d'arrière-plan des pages @@ -520,7 +520,7 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi Background text color - Couleur d'arrière-plan du texte + Couleur d'arrière-plan des textes @@ -561,7 +561,7 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi If checked, will automatically close the Start page when FreeCAD launches - Si coché, fermera automatiquement la page de démarrage au lancement de FreeCAD + Si cette option est cochée, cela fermera automatiquement la page de démarrage au lancement de FreeCAD. @@ -576,12 +576,12 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi Close and switch on opening file - Fermer et basculer à l'ouverture du fichier + Fermer et basculer à l'ouverture des fichiers If application is started by opening a file, apply the two settings above - Si l'application est lancée par l'ouverture d'un fichier, appliquez les deux paramètres ci-dessus + Si l'application est lancée par l'ouverture d'un fichier, cela applique les deux paramètres au-dessus. @@ -609,7 +609,8 @@ En utilisant ";;" pour séparer les chemins, vous pouvez ajouter plusieurs dossi <html><head/><body><p>You can paste your custom CSS here and the Start Page will apply it for you. To learn more about how you can style the Start Page, take a look at the HTML and CSS sources:</p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.html"><span style=" text-decoration: underline; color:#1d99f3;">https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.html</span></a></p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css"><span style=" text-decoration: underline; color:#1d99f3;">https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css</span></a></p></body></html> - <html><head/><body><p>Vous pouvez coller votre CSS personnalisé ici et la page de démarrage l'appliquera pour vous. Pour en savoir plus sur la façon de personnaliser la page d'accueil, voir les sources HTML et CSS :</p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.html"><span style=" text-decoration: underline; color:#1d99f3;">https://github. om/FreeCAD/FreeCAD/blob/master/src/Mod/StartPage/StartPage/StartPage.html</span></a></p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css"><span style=" text-decoration: underline; color:#1d99f3;">https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css</span></a></p></body></html> + <html><head/><body><p>Vous pouvez coller votre CSS personnalisé ici et la page de démarrage l'appliquera pour vous. +Pour en savoir plus sur la façon de personnaliser la page d'accueil, voir les sources HTML et CSS :</p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.html"><span style=" text-decoration: underline; color:#1d99f3;">https://github. om/FreeCAD/FreeCAD/blob/master/src/Mod/StartPage/StartPage/StartPage.html</span></a></p><p><a href="https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css"><span style=" text-decoration: underline; color:#1d99f3;">https://github.com/FreeCAD/FreeCAD/blob/master/src/Mod/Start/StartPage/StartPage.css</span></a></p></body></html> diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index fae58fb6be..8e84fb741a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw - + Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw - + Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw - + Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw - + Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw - + Insert Center Line - + Add Centerline to Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw - + Remove Cosmetic Object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw - + Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw - + Insert Cosmetic Vertex - + Add Cosmetic Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw - + Change Appearance of Lines - + Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw - + Add Centerline to Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw - + Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw - + Add Midpoint Vertices @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw - + Add Quadrant Vertices @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw - + Insert Rich Text Annotation @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw - + Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw - + Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw - + Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ - + Save page to dxf - + Add Midpoint Vertices - + Add Quadrant Vertices - + Create Annotation @@ -2058,7 +2058,7 @@ - + Create Balloon @@ -2073,8 +2073,8 @@ - + Create Cosmetic Line @@ -2415,7 +2415,7 @@ - + Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection @@ -2744,9 +2744,10 @@ - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection - + Select an object first - + Too many objects selected - + Create a page first. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. @@ -2906,8 +2906,6 @@ - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection @@ -3058,56 +3058,9 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection - + Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. - - + + No DrawViewPart objects in this selection - - + + No base View in Selection. - + You must select Faces or an existing CenterLine. - + No CenterLine in selection. - - - + + + Selection is not a CenterLine. - + Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. - + Not enough points in selection. - + Selection is not a Cosmetic Line. - + You must select 2 Vertexes. - + You must select a base View for the circle. - + Please select a center for the circle. - - + + Nothing selected - + At least 1 object in selection is not a part view - + Unknown object type in selection - + No View in Selection. - + You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols - + + No page to insert the symbol! + + + + + Selected object is not a part view, nor a leader line + + + + No Part View in Selection - + No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? @@ -3459,9 +3469,9 @@ + - Rich text editor @@ -3579,8 +3589,8 @@ - + Edit %1 @@ -3699,14 +3709,12 @@ - Selection is empty - No object selected @@ -3748,12 +3756,12 @@ - + Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3771,37 +3779,37 @@ thick: %4 - + Method - + Addition - + Average roughness - + Roughness sampling length - + Lay symbol - + Minimum roughness grade number - + Maximum roughness grade number @@ -3850,28 +3858,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies @@ -7351,6 +7359,8 @@ You can pick further points to get line segments. + + Top @@ -7361,6 +7371,8 @@ You can pick further points to get line segments. + + Left @@ -7371,11 +7383,14 @@ You can pick further points to get line segments. + + Right + Rear @@ -7386,6 +7401,8 @@ You can pick further points to get line segments. + + Bottom @@ -7435,6 +7452,35 @@ using the given X/Y Spacing Vertical space between border of projections + + + + FrontTopLeft + + + + + + FrontBottomRight + + + + + + FrontTopRight + + + + + + FrontBottomLeft + + + + + Front + + TechDrawGui::TaskProjection @@ -7845,7 +7891,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols @@ -8039,7 +8085,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines @@ -8047,7 +8093,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points @@ -8063,7 +8109,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View @@ -8084,7 +8130,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces @@ -8100,7 +8146,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8108,7 +8154,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8882,12 +8928,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw - + Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts index 59496489fe..7b2ded8149 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Дадаць цэнтральную лінію паміж дзвюма лініямі @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Дадаць цэнтральную лінію паміж дзвюма кропкамі @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Дадаць вяршыні па сярэдзіне @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Дадаць вяршыні па чатырох крайніх кропках @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Тэхнічны чарцёж - + Add Centerline between 2 Lines Дадаць цэнтральную лінію паміж дзвюма лініямі @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Тэхнічны чарцёж - + Add Centerline between 2 Points Дадаць цэнтральную лінію паміж дзвюма кропкамі @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Тэхнічны чарцёж - + Add Cosmetic Line Through 2 Points Дадаць касметычную лінію праз дзве кропкі @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Тэхнічны чарцёж - + Insert Annotation Уставіць заметку @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Тэхнічны чарцёж - + Insert Center Line Уставіць цэнтральную лінію - + Add Centerline to Faces Дадаць цэнтральную лінію на грані @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Тэхнічны чарцёж - + Remove Cosmetic Object Выдаліць касметычны аб'ект @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Тэхнічны чарцёж - + Add Cosmetic Vertex Дадаць касметычную вяршыню @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Тэхнічны чарцёж - + Insert Cosmetic Vertex Уставіць касметычную вяршыню - + Add Cosmetic Vertex Дадаць касметычную вяршыню @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Тэхнічны чарцёж - + Change Appearance of Lines Змяніць знешні выгляд ліній - + Change Appearance of selected Lines Змяніць знешні выгляд абраных ліній @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Тэхнічны чарцёж - + Add Centerline to Faces Дадаць цэнтральную лінію на грані @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw Тэхнічны чарцёж - + Add Leaderline to View Дадаць зноску на выгляд @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw Тэхнічны чарцёж - + Add Midpoint Vertices Дадаць вяршыні па сярэдзіне @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw Тэхнічны чарцёж - + Add Quadrant Vertices Дадаць вяршыні па чатырох крайніх кропках @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Тэхнічны чарцёж - + Insert Rich Text Annotation Уставіць заметку з адфарматаваным тэкстам @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw Тэхнічны чарцёж - + Show/Hide Invisible Edges Паказаць/схаваць нябачныя рэбры @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Тэхнічны чарцёж - + Create a Surface Finish Symbol Стварыце знак аздаблення паверхні - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Абярыце выгляд<br> - націсніце кнопку<br> - абярыце атрыбуты знака аздаблення паверхні ў панэлі, якая адчынілася @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw Тэхнічны чарцёж - + Add Welding Information to Leaderline Дадаць інфармацыю аб зварным злучэнні ў зноску @@ -1996,23 +1996,23 @@ Стварыць выгляд Аркуша - + Save page to dxf Захаваць старонку ў файл dxf - + Add Midpoint Vertices Дадаць вяршыні па сярэдзіне - + Add Quadrant Vertices Дадаць вяршыні па чатырох крайніх кропках - + Create Annotation Стварыць заметку @@ -2058,7 +2058,7 @@ Перацягнуць вымярэнне - + Create Balloon Стварыць пазіцыйную зноску @@ -2073,8 +2073,8 @@ Стварыць цэнтральную лінію - + Create Cosmetic Line Стварыць касметычную лінію @@ -2415,7 +2415,7 @@ Наладзіць фармат - + Surface Finish Symbols Знакі аздаблення паверхні @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Няправільны выбар @@ -2744,9 +2744,10 @@ Аб'ект профілю не знойдзены ў абраным - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Няправільны выбар - + Select an object first Спачатку абярыце аб'ект - + Too many objects selected Абрана зашмат аб'ектаў - + Create a page first. Спачатку стварыць старонку. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Без выгляду дэталі ў абраным. @@ -2906,8 +2906,6 @@ Абранае рабро ўяўляе сабой B-сплайн. Радыус будзе прыблізным. Ці працягнуць? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Няправільны выбар @@ -3058,56 +3058,9 @@ Абярыце два кропкавых аб'екта і адзін выгляд. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Задача ў працэсе - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Задача ў працэсе + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Зачыніце дыялогавае акно бягучай задачы і паўтарыце спробу. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Няправільны выбар - + Can not attach leader. No base View selected. Не атрымалася прымацаваць зноску. Асноўны выгляд не абраны. - - - - + + + + You must select a base View for the line. Неабходна абраць асноўны выгляд для лініі. - - + + No DrawViewPart objects in this selection Без аб'ектаў DrawViewPart у абраным - - + + No base View in Selection. Без асноўнага выгляду ў абраным. - + You must select Faces or an existing CenterLine. Неабходна абраць грані ці існуючую цэнтральную лінію. - + No CenterLine in selection. Без цэнтральнай лініі ў абраным. - - - + + + Selection is not a CenterLine. Абрана не цэнтральная лінія. - + Selection not understood. Выбар не зразумелы. - + You must select 2 Vertexes or an existing CenterLine. Неабходна абраць дзве вяршыні ці існуючую цэнтральную лінію. - + Need 2 Vertices or 1 CenterLine. Патрэбныя дзве вяршыні ці адна цэнтральная лінія. - - + + Selection is empty. Выбар пусты. - + Not enough points in selection. Абрана недастаткова кропак. - + Selection is not a Cosmetic Line. Абрана не касметычная лінія. - + You must select 2 Vertexes. Неабходна абраць дзве вяршыні. - + You must select a base View for the circle. Неабходна абраць асноўны выгляд для акружнасці. - + Please select a center for the circle. Калі ласка, абярыце цэнтр для акружнасці. - - + + Nothing selected Нічога не абрана - + At least 1 object in selection is not a part view Прынамсі, адзін абраны аб'ект не з'яўляецца выглядам дэталі - + Unknown object type in selection Невядомы тып аб'екту ў абраным - + No View in Selection. Без выгляду ў абраным. - + You must select a View and/or lines. Неабходна абраць выгляд і/ці лініі. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Абрана не касметычная акружнасць ці не касметычная дуга акружнасці. - + No Part Views in this selection Без выглядаў Дэталі ў абраным - + Select exactly one Leader line or one Weld symbol. Абярыце толькі адну лінію зноскі, альбо адзін сімвал зварнога шва. - - + + SurfaceFinishSymbols Знакі аздаблення паверхні - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Без выгляду Дэталі ў абраным - + No %1 in Selection Без %1 у абраным @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Ці ўпэўненыя вы, што жадаеце працягнуць? @@ -3459,9 +3469,9 @@ Сродак стварэння адфарматаванага тэксту + - Rich text editor Рэдактар адфарматаванага тэксту @@ -3579,8 +3589,8 @@ Змяніць вынасны элемент - + Edit %1 Змяніць %1 @@ -3699,14 +3709,12 @@ Без абраных укладзеных элементаў - Selection is empty Выбар пусты - No object selected @@ -3748,12 +3756,12 @@ Абярыце дзве вяршыні альбо адно рабро - + Please select a Line Group Калі ласка, абярыце суполку ліній - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Змяніць штрыхоўку грані - + Method Метад - + Addition Дапаўненне - + Average roughness Сярэдняя шурпатасць - + Roughness sampling length Даўжыня выбаркі шурпатасці - + Lay symbol Знак напрамку - + Minimum roughness grade number Найменшае значэнне класа шурпатасці - + Maximum roughness grade number Найбольшае значэнне класа шурпатасці @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Вы не можаце выдаліць лінію зноскі, бо на ёй ёсць знак зварнога шва, які можа стаць пашкоджаным. - + You cannot delete this view because it has one or more dependent views that would become broken. Вы не можаце выдаліць выгляд, бо ў ім ёсць адзін ці некалькі залежных выглядаў, якія могуць стаць пашкоджанымі. - + + + + - - - - - + + Object dependencies Залежнасці аб'екта @@ -7401,6 +7409,8 @@ You can pick further points to get line segments. + + Top Верхні @@ -7411,6 +7421,8 @@ You can pick further points to get line segments. + + Left Левы @@ -7421,11 +7433,14 @@ You can pick further points to get line segments. + + Right Правы + Rear Задні @@ -7436,6 +7451,8 @@ You can pick further points to get line segments. + + Bottom Ніжні @@ -7485,6 +7502,35 @@ using the given X/Y Spacing Vertical space between border of projections Вертыкальная прастора паміж межамі праекцый + + + + FrontTopLeft + Пярэдні верхні левы + + + + + FrontBottomRight + Пярэдні ніжні правы + + + + + FrontTopRight + Пярэдні верхні правы + + + + + FrontBottomLeft + Пярэдні ніжні левы + + + + Front + Спераду + TechDrawGui::TaskProjection @@ -7895,7 +7941,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Знакі аздаблення паверхні @@ -8089,7 +8135,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Дадае цэнтральную лінію паміж дзвюма лініямі @@ -8097,7 +8143,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Дадае цэнтральную лінію паміж двума кропкамі @@ -8113,7 +8159,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Устаўляе касметычную вяршыню ў выгляд @@ -8134,7 +8180,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Дадае цэнтральную лінію на грані @@ -8150,7 +8196,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Устаўляе касметычныя вяршыні ў сярэдняй кропцы абраных рэбраў @@ -8158,7 +8204,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Устаўляе касметычныя вяршыні ў чатырох крайніх кропках абранай акружнасці @@ -8939,12 +8985,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw Тэхнічны чарцёж - + Add Cosmetic Circle Дадаць касметычную акружнасць diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 99edb09969..5cfb0b8ad7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Afegeix vèrtex de punt central @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Afegeix vèrtexs de quadrant @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Afegeix una línia cosmètica amb 2 punts @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix una anotació @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix Línia Central - + Add Centerline to Faces Afegeix una línia central a les cares @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Lleva un objecte cosmètic @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afegeix un vèrtex cosmètic @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insereix un vèrtex cosmètic - + Add Cosmetic Vertex Afegeix un vèrtex cosmètic @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies - + Change Appearance of selected Lines Canvia l'aparença de les línies seleccionades @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afegeix una línia central a les cares @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Afegeix un línia guia a la vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afegeix vèrtex de punt central @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afegeix vèrtexs de quadrant @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insereix una anotació de text enriquit @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afegeix la informació de soldadura a la línia guia @@ -1996,23 +1996,23 @@ Crea una vista de full de càlcul - + Save page to dxf Guardar pàgina com dxf - + Add Midpoint Vertices Afegeix vèrtex de punt central - + Add Quadrant Vertices Afegeix vèrtexs de quadrant - + Create Annotation Crear Anotació @@ -2058,7 +2058,7 @@ Arrossegar Dimensió - + Create Balloon Crea un globus @@ -2073,8 +2073,8 @@ Crea una línia central - + Create Cosmetic Line Crea una línia cosmètica @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Selecció incorrecta @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selecció incorrecta - + Select an object first Seleccioneu primer un objecte - + Too many objects selected Hi ha masses objectes seleccionats - + Create a page first. Crear una pàgina primer. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No hi ha cap vista d'una peça en la selecció. @@ -2906,8 +2906,6 @@ L'aresta seleccionada és una BSpline. El radi serà aproximat. Voleu continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selecció incorrecta @@ -3058,56 +3058,9 @@ Seleccioneu 2 objectes punt i una vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tasca en procés - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tasca en procés + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Tanca el quadre de diàleg de tasques actiu i intenta-ho altra vegada. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Selecció incorrecta - + Can not attach leader. No base View selected. No es pot adjuntar la guia. No s'ha seleccionat cap vista de base. - - - - + + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - - + + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entès la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - - + + Selection is empty. La selecció és buida. - + Not enough points in selection. No hi ha prou punts a la selecció. - + Selection is not a Cosmetic Line. La selecció no és una línia cosmètica. - + You must select 2 Vertexes. S'han de triar 2 vèrtexs. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte de la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció - + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No hi ha cap vista de peça en la selecció - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Segur que voleu continuar? @@ -3459,9 +3469,9 @@ Creador de text enriquit + - Rich text editor Editor de text enriquit @@ -3579,8 +3589,8 @@ Edita la vista de detall - + Edit %1 Editar %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Mètode - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No podeu suprimir aquesta línia guia perquè conté un símbol de soldadura que es trencaria. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Dependències de l'objecte @@ -7393,6 +7401,8 @@ You can pick further points to get line segments. + + Top Planta @@ -7403,6 +7413,8 @@ You can pick further points to get line segments. + + Left Esquerra @@ -7413,11 +7425,14 @@ You can pick further points to get line segments. + + Right Dreta + Rear Posterior @@ -7428,6 +7443,8 @@ You can pick further points to get line segments. + + Bottom Inferior @@ -7478,6 +7495,35 @@ usant l'espaiat X/Y donat Vertical space between border of projections Espai vertical entre límits de les projeccions + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Alçat + TechDrawGui::TaskProjection @@ -7888,7 +7934,7 @@ usant l'espaiat X/Y donat TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8082,7 +8128,7 @@ usant l'espaiat X/Y donat TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afegeix una línia central entre 2 línies @@ -8090,7 +8136,7 @@ usant l'espaiat X/Y donat TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afegeix una línia central entre 2 punts @@ -8106,7 +8152,7 @@ usant l'espaiat X/Y donat TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insereix un vèrtex cosmètic en una vista @@ -8127,7 +8173,7 @@ usant l'espaiat X/Y donat TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afegeix una línia central a una cara @@ -8143,7 +8189,7 @@ usant l'espaiat X/Y donat TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insereix un vèrtex cosmètic en el punt central de les arestes seleccionades @@ -8151,7 +8197,7 @@ usant l'espaiat X/Y donat TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insereix un vèrtex cosmètic en els punts quadrants dels cercles seleccionats @@ -8934,12 +8980,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index f5689b587d..b2bb387e79 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Přidat osu mezi 2 přímky @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Přidat osu mezi 2 body @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Přidat středy hran @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Přidat pravoúhlé vrcholy @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Přidat osu mezi 2 přímky @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Přidat osu mezi 2 body @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Přidat pomocnou čáru mezi dvěma body @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Vložit poznámku @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Vložit středovou osu - + Add Centerline to Faces Přidat osu na plochu/y @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Odebrat pomocný objekt @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Přidat pomocný vrchol @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Vložit pomocný vrchol - + Add Cosmetic Vertex Přidat pomocný vrchol @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Změnit vzhled čar - + Change Appearance of selected Lines Změnit vzhled vybraných čar @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Přidat osu na plochu/y @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Přidat odkazovou čáru do pohledu @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Přidat středy hran @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Přidat pravoúhlé vrcholy @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Vložit poznámku řádkovým textem @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Zobrazit/skrýt neviditelné hrany @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Přidat svarovou informaci na odkazovou čáru @@ -1996,23 +1996,23 @@ Vytvořit pohled tabulky - + Save page to dxf Uložit stránku do dxf - + Add Midpoint Vertices Přidat středy hran - + Add Quadrant Vertices Přidat pravoúhlé vrcholy - + Create Annotation Vytvořit poznámku @@ -2058,7 +2058,7 @@ Táhnout kótu - + Create Balloon Vytvořit balon @@ -2073,8 +2073,8 @@ Vytvořit osu - + Create Cosmetic Line Vytvořit pomocnou čáru @@ -2415,7 +2415,7 @@ Přizpůsobit formát - + Surface Finish Symbols Symboly pro povrchovou konečnou úpravu @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Neplatný výběr @@ -2744,9 +2744,10 @@ Ve výběru nebyl nalezen žádný objekt profilu - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Nesprávný výběr - + Select an object first Nejprve vyberte objekt - + Too many objects selected Příliš mnoho vybraných objektů - + Create a page first. Vytvořte nejprve stránku. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Ve výběru není zobrazení součásti. @@ -2906,8 +2906,6 @@ Vybraná hrana je BSplajn. Poloměr bude přibližný. Pokračovat? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Nesprávný výběr @@ -3058,56 +3058,9 @@ Vyberte 2 bodové objekty a 1 pohled. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Probíhá úkol - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Probíhá úkol + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Zavřete aktivní dialog úkolů a zkuste to znovu. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Chybný výběr - + Can not attach leader. No base View selected. Nelze připojit vedoucí objekt. Není vybrán základní pohled. - - - - + + + + You must select a base View for the line. Pro čáru je nutno vybrat základní pohled. - - + + No DrawViewPart objects in this selection Ve výběru nejsou objekty DrawViewPart - - + + No base View in Selection. Ve výběru není základní pohled. - + You must select Faces or an existing CenterLine. Musíte vybrat plochy nebo existující osu. - + No CenterLine in selection. Žádná osa ve výběru. - - - + + + Selection is not a CenterLine. Výběr není osa. - + Selection not understood. Výběru nelze rozumět. - + You must select 2 Vertexes or an existing CenterLine. Musíte vybrat 2 vrcholy nebo existující osu. - + Need 2 Vertices or 1 CenterLine. Potřebuje 2 vrcholy nebo 1 osu. - - + + Selection is empty. Výběr je prázdný. - + Not enough points in selection. Nedostatek bodů ve výběru. - + Selection is not a Cosmetic Line. Výběr není pomocná čára. - + You must select 2 Vertexes. Musíte vybrat 2 vrcholy. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Není nic vybráno - + At least 1 object in selection is not a part view Minimálně 1 objekt ve výběru není součástí zobrazení dílu - + Unknown object type in selection Ve výběru je neznámý typ objektu - + No View in Selection. Ve výběru není žádný pohled. - + You must select a View and/or lines. Musíte vybrat pohled a/nebo čáry. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Žádné pohledy součásti ve výběru - + Select exactly one Leader line or one Weld symbol. Vybrat přesně jednu odkazovou čáru, nebo jeden symbol svaru. - - + + SurfaceFinishSymbols SurfaceFinishSymboly - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Ve výběru není zobrazena žádná část - + No %1 in Selection Žádný %1 ve výběru @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Opravdu si přejete pokračovat? @@ -3459,9 +3469,9 @@ Editor rozsáhlého textu + - Rich text editor Editor rozsáhlého textu @@ -3579,8 +3589,8 @@ Upravit detail pohledu - + Edit %1 Upravit %1 @@ -3699,14 +3709,12 @@ Nejsou vybrány žádné dílčí položky - Selection is empty Výběr je prázdný - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Metoda - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nemůžete smazat tuto odkazovou čáru, protože obsahuje symbol svaru, který by se rozbil. - + You cannot delete this view because it has one or more dependent views that would become broken. Nemůžete smazat tento názor, protože má jeden nebo více závislých názorů, které by byly porušeny. - + + + + - - - - - + + Object dependencies Závislosti objektu @@ -7403,6 +7411,8 @@ You can pick further points to get line segments. + + Top Horní @@ -7413,6 +7423,8 @@ You can pick further points to get line segments. + + Left Vlevo @@ -7423,11 +7435,14 @@ You can pick further points to get line segments. + + Right Vpravo + Rear Zadní @@ -7438,6 +7453,8 @@ You can pick further points to get line segments. + + Bottom Dole @@ -7488,6 +7505,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Přední + TechDrawGui::TaskProjection @@ -7898,7 +7944,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Symboly pro povrchovou konečnou úpravu @@ -8092,7 +8138,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Přidat osu mezi dvě čáry @@ -8100,7 +8146,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Přidat osu mezi dva body @@ -8116,7 +8162,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8137,7 +8183,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8153,7 +8199,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8161,7 +8207,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8944,12 +8990,12 @@ je zde otevřený dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Přidat Kosmetický kruh diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 760bf053a6..7914b59fdd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Mittelline zwischen 2 Linien hinzufügen @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Mittelline zwischen 2 Punkten hinzufügen @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Hilfslinie durch 2 Punkte hinzufügen @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Anmerkung einfügen @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Mittellinie einfügen - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Hilfsobjekt entfernen @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Hilfspunkt hinzufügen @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Hilfspunkt einfügen - + Add Cosmetic Vertex Hilfspunkt hinzufügen @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Liniendarstellung ändern - + Change Appearance of selected Lines Liniendarstellung ausgewählter Linien ändern @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Mittellinie zu Fläche(n) hinzufügen @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Hinweislinie zur Ansicht hinzufügen @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Rich-Text-Anmerkung einfügen @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Ausgeblendete Kanten ein-/ausblenden @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Oberflächensymbol erstellen - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Eine Ansicht auswählen<br> - Auf diese Schaltfläche klicken<br> - Attribute für die Oberflächensymbole im geöffneten Dialogfenster auswählen @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Hinzufügen von Schweißinformationen zur Hinweislinie @@ -1996,23 +1996,23 @@ Kalkulationstabellenansicht erstellen - + Save page to dxf Seite als dxf speichern - + Add Midpoint Vertices Kantenmittelpunkte hinzufügen - + Add Quadrant Vertices Quadrantengrenzpunkte hinzufügen - + Create Annotation Anmerkung erstellen @@ -2058,7 +2058,7 @@ Maß ziehen - + Create Balloon Hinweisfeld erstellen @@ -2073,8 +2073,8 @@ Mittellinie erstellen - + Create Cosmetic Line Hilfslinie erstellen @@ -2415,7 +2415,7 @@ Format anpassen - + Surface Finish Symbols Oberflächensymbole @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Falsche Auswahl @@ -2744,9 +2744,10 @@ Kein Profilobjekt in der Auswahl gefunden - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Falsche Auswahl - + Select an object first Zuerst ein Objekt auswählen - + Too many objects selected Zu viele Objekte ausgewählt - + Create a page first. Erstellen Sie zunächst eine Seite. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Keine Teileansicht in der Auswahl. @@ -2906,8 +2906,6 @@ Ausgewählte Kante ist ein B-Spline. Radius wird angenähert. Fortfahren? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Falsche Auswahl @@ -3058,56 +3058,9 @@ Wähle 2 Punktobjekte und 1 Ansicht. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Aufgabe in Bearbeitung - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Aufgabe in Bearbeitung + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Den aktiven Aufgaben-Dialog schliessen und erneut versuchen. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Falsche Auswahl - + Can not attach leader. No base View selected. Kann die Hinweislinie nicht hinzufügen. Es wurde keine Basisansicht ausgewählt. - - - - + + + + You must select a base View for the line. Sie müssen eine Basisansicht für die Linie auswählen. - - + + No DrawViewPart objects in this selection Keine DrawViewPart-Objekte in dieser Auswahl - - + + No base View in Selection. Keine Basisansicht ausgewählt. - + You must select Faces or an existing CenterLine. Sie müssen Flächen oder eine vorhandene Mittellinie auswählen. - + No CenterLine in selection. Keine Mittellinie ausgewählt. - - - + + + Selection is not a CenterLine. Auswahl ist keine Mittellinie. - + Selection not understood. Auswahl nicht verstanden. - + You must select 2 Vertexes or an existing CenterLine. Sie müssen 2 Punkte oder eine vorhandene Mittellinie auswählen. - + Need 2 Vertices or 1 CenterLine. Es werden 2 Punkte oder 1 Mittellinie benötigt. - - + + Selection is empty. Auswahl ist leer. - + Not enough points in selection. Nicht genügend Punkte ausgewählt. - + Selection is not a Cosmetic Line. Auswahl ist keine Hilfslinie. - + You must select 2 Vertexes. Es müssen 2 Knotenpunkte ausgewählt werden. - + You must select a base View for the circle. Es muss eine Basisansicht für den Kreis ausgewählt werden. - + Please select a center for the circle. Bitte einen Mittelpunkt für den Kreis auswählen. - - + + Nothing selected Nichts ausgewählt - + At least 1 object in selection is not a part view Mindestens 1 Objekt in der Auswahl ist keine Bauteilansicht - + Unknown object type in selection Unbekannter Objekttyp in der Auswahl - + No View in Selection. Keine Ansicht in der Auswahl. - + You must select a View and/or lines. Sie müssen eine Ansicht und / oder Linien auswählen. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Auswahl ist kein Hilfskreis oder ein Hilfskreisbogen. - + No Part Views in this selection Keine Fläche in dieser Auswahl - + Select exactly one Leader line or one Weld symbol. Auswahl genau einer Hinweislinie oder eines Schweißsymbols. - - + + SurfaceFinishSymbols Oberflächensymbole - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Keine Bauteilansicht ausgewählt - + No %1 in Selection Kein %1 in der Auswahl @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Bist du sicher, dass du fortfahren möchtest? @@ -3459,9 +3469,9 @@ Rich-Text Ersteller + - Rich text editor Rich-Text Editor @@ -3579,8 +3589,8 @@ Detailansicht bearbeiten - + Edit %1 %1 bearbeiten @@ -3699,14 +3709,12 @@ Keine Unterelemente ausgewählt - Selection is empty Nichts ausgewählt - No object selected @@ -3748,12 +3756,12 @@ 2 Knotenpunkte oder 1 Kante auswählen - + Please select a Line Group Bitte eine Liniengruppe auswählen - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Flächenschraffur bearbeiten - + Method Methode - + Addition Zugabe - + Average roughness Durchschnittliche Rauheit - + Roughness sampling length Länge der Rauheitsmessung - + Lay symbol Angriffssymbol - + Minimum roughness grade number Minimale Rauheitsgradzahl - + Maximum roughness grade number Maximale Rauheitsgradzahl @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Diese Hinweislinie kann nicht gelöscht werden, weil ihr ein Schweißsymbol zugeordnet ist, das dadurch unbrauchbar werden würde. - + You cannot delete this view because it has one or more dependent views that would become broken. Diese Ansicht kann nicht gelöscht werden, da von ihr eine oder mehrere Ansichten abhängen, die beschädigt werden könnten. - + + + + - - - - - + + Object dependencies Objektabhängigkeiten @@ -7392,6 +7400,8 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. + + Top Draufsicht @@ -7402,6 +7412,8 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. + + Left Seitenansicht von links @@ -7412,11 +7424,14 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. + + Right Seitenansicht von rechts + Rear Rückansicht @@ -7427,6 +7442,8 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. + + Bottom Unten @@ -7477,6 +7494,35 @@ mit dem vorgegebenen X/Y-Abstand Vertical space between border of projections Vertikaler Abstand zwischen den Rändern der Ansichten + + + + FrontTopLeft + VorneObenLinks + + + + + FrontBottomRight + VorneUntenRechts + + + + + FrontTopRight + VorneObenRechts + + + + + FrontBottomLeft + VorneUntenLinks + + + + Front + Vorderansicht + TechDrawGui::TaskProjection @@ -7887,7 +7933,7 @@ mit dem vorgegebenen X/Y-Abstand TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Oberflächensymbole @@ -8081,7 +8127,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Fügt eine Mittelline zwischen 2 Linien hinzu @@ -8089,7 +8135,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Fügt eine Mittelline zwischen 2 Punkten hinzu @@ -8105,7 +8151,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Fügt einen Hilfspunkt in eine Ansicht ein @@ -8126,7 +8172,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Fügt Flächen eine Mittellinie hinzu @@ -8142,7 +8188,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Fügt Hilfspunkte mittig auf den ausgewählten Kanten ein @@ -8150,7 +8196,7 @@ mit dem vorgegebenen X/Y-Abstand TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Fügt Hilfspunkte auf den Quadrantengrenzen ausgewählter Kreise ein @@ -8933,12 +8979,12 @@ noch ein Aufgaben-Dialog geöffnet ist. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Hilfskreis hinzufügen diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index 3b1b11cad6..3a089b3454 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Προσθήκη Κέντρου μεταξύ 2 Γραμμών @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Προσθήκη Κέντρου μεταξύ 2 Σημείων @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Προσθήκη Κατακόρυφων Τεταρτημορίων @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Lines Προσθήκη Κέντρου μεταξύ 2 Γραμμών @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline between 2 Points Προσθήκη Κέντρου μεταξύ 2 Σημείων @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Τεχνική Σχεδίαση - + Insert Annotation Εισαγωγή Περιγραφής @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Τεχνική Σχεδίαση - + Remove Cosmetic Object Remove Cosmetic Object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Τεχνική Σχεδίαση - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Τεχνική Σχεδίαση - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Τεχνική Σχεδίαση - + Add Centerline to Faces Add Centerline to Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw Τεχνική Σχεδίαση - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw Τεχνική Σχεδίαση - + Add Midpoint Vertices Add Midpoint Vertices @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw Τεχνική Σχεδίαση - + Add Quadrant Vertices Προσθήκη Κατακόρυφων Τεταρτημορίων @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Τεχνική Σχεδίαση - + Insert Rich Text Annotation Εισαγάγετε σχολιασμό εμπλουτισμένου κειμένου @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw Τεχνική Σχεδίαση - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Τεχνική Σχεδίαση - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw Τεχνική Σχεδίαση - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices Add Midpoint Vertices - + Add Quadrant Vertices Προσθήκη Κατακόρυφων Τεταρτημορίων - + Create Annotation Δημιουργία Σημείωσης @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Λάθος επιλογή @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Εσφαλμένη επιλογή - + Select an object first Επιλέξτε πρώτα ένα αντικείμενο - + Too many objects selected Επιλέχθηκαν πάρα πολλά αντικείμενα - + Create a page first. Δημιουργήστε πρώτα μια σελίδα. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No View of a Part in selection. @@ -2906,8 +2906,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Εσφαλμένη Επιλογή @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Task In Progress - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Task In Progress + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Are you sure you want to continue? @@ -3459,9 +3469,9 @@ Rich text creator + - Rich text editor Rich text editor @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Επεξεργασία %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Μέθοδος - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Εξαρτήσεις αντικειμένου @@ -7406,6 +7414,8 @@ You can pick further points to get line segments. + + Top Πάνω @@ -7416,6 +7426,8 @@ You can pick further points to get line segments. + + Left Αριστερά @@ -7426,11 +7438,14 @@ You can pick further points to get line segments. + + Right Δεξιά + Rear Οπίσθια @@ -7441,6 +7456,8 @@ You can pick further points to get line segments. + + Bottom Κάτω @@ -7491,6 +7508,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Εμπρόσθια + TechDrawGui::TaskProjection @@ -7901,7 +7947,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8095,7 +8141,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8103,7 +8149,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8119,7 +8165,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8140,7 +8186,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8156,7 +8202,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8164,7 +8210,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8947,12 +8993,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw Τεχνική Σχεδίαση - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index 9eba503ea1..9e847fd727 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Agregar línea de centro entre 2 líneas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Agregar línea de centro entre 2 puntos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Agregar punto medio @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Agregar vértices de cuadrantes @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw DibujoTécnico - + Add Centerline between 2 Lines Agregar línea de centro entre 2 líneas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw DibujoTécnico - + Add Centerline between 2 Points Agregar línea de centro entre 2 puntos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw DibujoTécnico - + Add Cosmetic Line Through 2 Points Agregar línea adicional a través de 2 puntos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw DibujoTécnico - + Insert Annotation Insertar anotación @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw DibujoTécnico - + Insert Center Line Insertar línea de centro - + Add Centerline to Faces Agregar línea de centro a caras @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw DibujoTécnico - + Remove Cosmetic Object Eliminar objeto adicional @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw DibujoTécnico - + Add Cosmetic Vertex Agregar vértice adicional @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw DibujoTécnico - + Insert Cosmetic Vertex Insertar vértice adicional - + Add Cosmetic Vertex Agregar vértice adicional @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw DibujoTécnico - + Change Appearance of Lines Cambiar apariencia de líneas - + Change Appearance of selected Lines Cambia la apariencia de las líneas seleccionadas @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw DibujoTécnico - + Add Centerline to Faces Agregar línea de centro a caras @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw DibujoTécnico - + Add Leaderline to View Agregar línea de referencia a la Vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw DibujoTécnico - + Add Midpoint Vertices Agregar punto medio @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw DibujoTécnico - + Add Quadrant Vertices Agregar vértices de cuadrantes @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw DibujoTécnico - + Insert Rich Text Annotation Insertar anotación de texto enriquecido @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw DibujoTécnico - + Show/Hide Invisible Edges Mostrar/ocultar aristas invisibles @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw DibujoTécnico - + Create a Surface Finish Symbol Crear un símbolo de acabado superficial - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Seleccione una vista<br> - haga clic en este botón<br> - seleccione los atributos del símbolo de acabado de superficie en el panel abierto @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw DibujoTécnico - + Add Welding Information to Leaderline Agregar información de soldadura a la Línea de referencia @@ -1996,23 +1996,23 @@ Crear vista de hoja de cálculo - + Save page to dxf Guardar página como dxf - + Add Midpoint Vertices Agregar punto medio - + Add Quadrant Vertices Agregar vértices de cuadrantes - + Create Annotation Crear anotación @@ -2058,7 +2058,7 @@ Arrastrar Cota - + Create Balloon Crear globo @@ -2073,8 +2073,8 @@ Crear línea central - + Create Cosmetic Line Crear Línea Adicional @@ -2415,7 +2415,7 @@ Formato personalizado - + Surface Finish Symbols Símbolos de acabado de superficie @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Selección Incorrecta @@ -2744,9 +2744,10 @@ No se encontró ningún objeto de perfil en la selección - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selección incorrecta - + Select an object first Seleccione primero un objeto - + Too many objects selected Demasiados objetos seleccionados - + Create a page first. Cree una página de dibujo primero. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No hay Vista de una Pieza en la selección. @@ -2906,8 +2906,6 @@ La arista seleccionada es un BSpline. El radio será aproximado. ¿Continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selección incorrecta @@ -3058,56 +3058,9 @@ Seleccione objetos de 2 puntos y 1 Vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tarea en progreso - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tarea en progreso + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Cerrar diálogo de tareas activo e inténtelo de nuevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Selección Incorrecta - + Can not attach leader. No base View selected. No se puede adjuntar directriz. No se ha seleccionado la Vista base. - - - - + + + + You must select a base View for the line. Debe seleccionar una Vista base para la línea. - - + + No DrawViewPart objects in this selection No hay objetos DibujoVistaPieza en esta selección - - + + No base View in Selection. No hay Vista base en la Selección. - + You must select Faces or an existing CenterLine. Debe seleccionar Caras o una Línea de Centro existente. - + No CenterLine in selection. No hay Línea de Centro en la selección. - - - + + + Selection is not a CenterLine. La selección no es una Línea de Centro. - + Selection not understood. Selección no entendida. - + You must select 2 Vertexes or an existing CenterLine. Debe seleccionar 2 Vértices o una Línea de Centro existente. - + Need 2 Vertices or 1 CenterLine. Necesita 2 vértices o una Línea de Centro. - - + + Selection is empty. La selección está vacía. - + Not enough points in selection. No hay suficientes puntos en la selección. - + Selection is not a Cosmetic Line. La selección no es una Línea Adicional. - + You must select 2 Vertexes. Debe seleccionar 2 Vértices. - + You must select a base View for the circle. Debe seleccionar una vista base para el círculo. - + Please select a center for the circle. Por favor, seleccione un centro para el círculo. - - + + Nothing selected Nada seleccionado - + At least 1 object in selection is not a part view Al menos 1 objeto en la selección no es una vista de pieza - + Unknown object type in selection Tipo de objeto desconocido en la selección - + No View in Selection. No hay Vista en la Selección. - + You must select a View and/or lines. Debe seleccionar una Vista y/o líneas. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. La selección no es un círculo o un arco de círculo adicional. - + No Part Views in this selection No hay Vistas de Piezas en esta selección - + Select exactly one Leader line or one Weld symbol. Seleccione exactamente una línea de referencia o un símbolo de Soldadura. - - + + SurfaceFinishSymbols SímbolosdeAcabadoSuperficial - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Ninguna vista de partes en la selección - + No %1 in Selection No hay %1 en la selección @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? ¿Estás seguro/a de que quieres continuar? @@ -3459,9 +3469,9 @@ Creador de texto enriquecido + - Rich text editor Editor de texto enriquecido @@ -3579,8 +3589,8 @@ Editar Vista Detalle - + Edit %1 Editar %1 @@ -3699,14 +3709,12 @@ No hay sub-elementos seleccionados - Selection is empty La selección está vacía - No object selected @@ -3748,12 +3756,12 @@ Seleccione 2 vértices o 1 arista - + Please select a Line Group Por favor, seleccione un grupo de línea - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ grueso: %4 Editar rayado de cara - + Method Método - + Addition Adición - + Average roughness Rugosidad media - + Roughness sampling length Longitud de muestreo de rugosidad - + Lay symbol Símbolo de Lay - + Minimum roughness grade number Número mínimo de grado de rugosidad - + Maximum roughness grade number Número máximo de grado de rugosidad @@ -3853,29 +3861,29 @@ grueso: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No puede borrar esta línea de referencia porque tiene un símbolo de soldadura que se rompería. - + You cannot delete this view because it has one or more dependent views that would become broken. No puede eliminar esta vista porque tiene una o más vistas dependientes que se romperían. - + + + + - - - - - + + Object dependencies Dependencias del objeto @@ -7404,6 +7412,8 @@ Puedes seleccionar más puntos para obtener segmentos de línea. + + Top Superior @@ -7414,6 +7424,8 @@ Puedes seleccionar más puntos para obtener segmentos de línea. + + Left Izquierda @@ -7424,11 +7436,14 @@ Puedes seleccionar más puntos para obtener segmentos de línea. + + Right Derecha + Rear Posterior @@ -7439,6 +7454,8 @@ Puedes seleccionar más puntos para obtener segmentos de línea. + + Bottom Inferior @@ -7489,6 +7506,35 @@ usando el espacio X/Y dado Vertical space between border of projections Espacio vertical entre el borde de las proyecciones + + + + FrontTopLeft + Frente arriba a la izquierda + + + + + FrontBottomRight + Frente abajo a la derecha + + + + + FrontTopRight + Frente arriba a la derecha + + + + + FrontBottomLeft + Frente abajo a la izquierda + + + + Front + Anterior + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ usando el espacio X/Y dado TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Símbolos de acabado de superficie @@ -8093,7 +8139,7 @@ usando el espacio X/Y dado TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Agrega una línea de centro entre 2 líneas @@ -8101,7 +8147,7 @@ usando el espacio X/Y dado TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Agrega una línea de centro entre 2 puntos @@ -8117,7 +8163,7 @@ usando el espacio X/Y dado TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserta un vértice adicional en una Vista @@ -8138,7 +8184,7 @@ usando el espacio X/Y dado TechDraw_FaceCenterLine - + Adds a Centerline to Faces Agrega una línea de centro a las caras @@ -8154,7 +8200,7 @@ usando el espacio X/Y dado TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserta vértices adicionales en el punto medio de las aristas seleccionadas @@ -8162,7 +8208,7 @@ usando el espacio X/Y dado TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserta vértices adicionales en los cuadrantes de los círculos seleccionados @@ -8945,12 +8991,12 @@ hay un diálogo de tareas abiertas. CmdTechDrawCosmeticCircle - + TechDraw DibujoTécnico - + Add Cosmetic Circle Agregar círculo adicional diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index fe14076f87..f86bfdb95b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Añadir Vértices de Punto Medio @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Añadir Vértices de Cuadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Dibujo técnico - + Add Centerline between 2 Lines Añadir Línea Central entre 2 Líneas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Dibujo técnico - + Add Centerline between 2 Points Añadir Línea Central entre 2 Puntos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Dibujo técnico - + Add Cosmetic Line Through 2 Points Añadir Línea Cosmética a través 2 puntos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Dibujo técnico - + Insert Annotation Insertar anotación @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Dibujo técnico - + Insert Center Line Insertar Línea Central - + Add Centerline to Faces Añadir línea central a las caras @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Dibujo técnico - + Remove Cosmetic Object Eliminar Objeto Cosmético @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Dibujo técnico - + Add Cosmetic Vertex Añadir vértice cosmético @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Dibujo técnico - + Insert Cosmetic Vertex Insertar vértice cosmético - + Add Cosmetic Vertex Añadir vértice cosmético @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Dibujo técnico - + Change Appearance of Lines Cambiar el aspecto de las líneas - + Change Appearance of selected Lines Cambiar apariencia de las líneas seleccionadas @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Dibujo técnico - + Add Centerline to Faces Añadir línea central a las caras @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw Dibujo técnico - + Add Leaderline to View Agregar Línea de Referencia a la Vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw Dibujo técnico - + Add Midpoint Vertices Añadir Vértices de Punto Medio @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw Dibujo técnico - + Add Quadrant Vertices Añadir Vértices de Cuadrante @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Dibujo técnico - + Insert Rich Text Annotation Insertar Anotación de Texto Enriquecido @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw Dibujo técnico - + Show/Hide Invisible Edges Mostrar/Ocultar Bordes Invisibles @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Dibujo técnico - + Create a Surface Finish Symbol Crear un símbolo de acabado superficial - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Seleccione una vista<br> - haga clic en este botón<br> - seleccione los atributos del símbolo de acabado de superficie en el panel abierto @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw Dibujo técnico - + Add Welding Information to Leaderline Agregar Información de Soldadura a la Línea de Referencia @@ -1996,23 +1996,23 @@ Crear vista de hoja de cálculo - + Save page to dxf Guardar página como dxf - + Add Midpoint Vertices Añadir Vértices de Punto Medio - + Add Quadrant Vertices Añadir Vértices de Cuadrante - + Create Annotation Crear Anotación @@ -2058,7 +2058,7 @@ Arrastrar Cota - + Create Balloon Crear Globo @@ -2073,8 +2073,8 @@ Crear Línea Central - + Create Cosmetic Line Crear Línea Cosmética @@ -2415,7 +2415,7 @@ Personalizar formato - + Surface Finish Symbols Símbolos de acabado de superficie @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Selección incorrecta @@ -2744,9 +2744,10 @@ No se encontró ningún objeto de perfil en la selección - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selección incorrecta - + Select an object first Seleccione un objeto en primer lugar - + Too many objects selected Demasiados objetos seleccionados - + Create a page first. Cree una página de dibujo primero. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Sin vista de un objeto Part en la selección. @@ -2906,8 +2906,6 @@ El borde seleccionado es un BSpline. El dadio será aproximado. ¿Continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selección incorrecta @@ -3058,56 +3058,9 @@ Seleccione objetos de 2 puntos y 1 Vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tarea en progreso - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tarea en progreso + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Cerrar diálogo de tareas activo e inténtelo de nuevo. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Selección Incorrecta - + Can not attach leader. No base View selected. No se puede adjuntar directriz. No se ha seleccionado la vista base. - - - - + + + + You must select a base View for the line. Debe seleccionar una vista base para la línea. - - + + No DrawViewPart objects in this selection No hay objetos DrawViewPart en esta selección - - + + No base View in Selection. No hay Vista base en la selección. - + You must select Faces or an existing CenterLine. Debe seleccionar una(s) cara(s) o una línea central existente. - + No CenterLine in selection. No hay Línea Central en la selección. - - - + + + Selection is not a CenterLine. La selección no es una línea central. - + Selection not understood. Selección no entendida. - + You must select 2 Vertexes or an existing CenterLine. Debe seleccionar 2 Vértices o una Línea Central existente. - + Need 2 Vertices or 1 CenterLine. Necesita 2 vértices o una línea central. - - + + Selection is empty. La selección está vacía. - + Not enough points in selection. No hay suficientes puntos en la selección. - + Selection is not a Cosmetic Line. La selección no es una Línea Cosmética. - + You must select 2 Vertexes. Debe seleccionar 2 Vértices. - + You must select a base View for the circle. Debe seleccionar una vista base para la línea. - + Please select a center for the circle. Por favor, seleccione un centro para el círculo. - - + + Nothing selected Nada seleccionado - + At least 1 object in selection is not a part view Al menos 1 objeto en la selección no es una vista de pieza - + Unknown object type in selection Tipo de objeto desconocido en la selección - + No View in Selection. No hay Vista en la Selección. - + You must select a View and/or lines. Debe seleccionar una vista y/o líneas. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No hay Vistas de Piezas en esta selección - + Select exactly one Leader line or one Weld symbol. Seleccione exactamente una Línea de referencia o un símbolo de Soldadura. - - + + SurfaceFinishSymbols SímbolosdeAcabadoSuperficial - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No hay Vista de parte en la selección - + No %1 in Selection No hay %1 en la selección @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? ¿Está seguro de que desea continuar? @@ -3459,9 +3469,9 @@ Creador de texto enriquecido + - Rich text editor Editor de texto enriquecido @@ -3579,8 +3589,8 @@ Editar vista de detalles - + Edit %1 Editar %1 @@ -3699,14 +3709,12 @@ No hay subelementos seleccionados - Selection is empty No ha seleccionado nada - No object selected @@ -3748,12 +3756,12 @@ Seleccione 2 vértices o 1 borde - + Please select a Line Group Por favor, seleccione un grupo de línea - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Editar sombreado de cara - + Method Método - + Addition Adición - + Average roughness Aspereza promedio - + Roughness sampling length Longitud de muestreo de rugosidad - + Lay symbol Símbolo de Lay - + Minimum roughness grade number Número mínimo de grado de rugosidad - + Maximum roughness grade number Número máximo de grado de rugosidad @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No puede borrar esta línea de referencia porque tiene un símbolo de soldadura que se rompería. - + You cannot delete this view because it has one or more dependent views that would become broken. No se puede borrar esta vista porque tiene una o más vistas dependientes que se romperían. - + + + + - - - - - + + Object dependencies Dependencias del objeto @@ -7404,6 +7412,8 @@ Puedes elegir más puntos para obtener segmentos de línea. + + Top Planta @@ -7414,6 +7424,8 @@ Puedes elegir más puntos para obtener segmentos de línea. + + Left Izquierda @@ -7424,11 +7436,14 @@ Puedes elegir más puntos para obtener segmentos de línea. + + Right Derecha + Rear Posterior @@ -7439,6 +7454,8 @@ Puedes elegir más puntos para obtener segmentos de línea. + + Bottom Inferior @@ -7489,6 +7506,35 @@ usando el Espaciado X/Y dado Vertical space between border of projections Espacio vertical entre el borde de las proyecciones + + + + FrontTopLeft + Frontal izquierdo + + + + + FrontBottomRight + Frontal inferior derecho + + + + + FrontTopRight + Frontal derecho + + + + + FrontBottomLeft + Frontal inferior izquierdo + + + + Front + Alzado + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ usando el Espaciado X/Y dado TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Símbolos de acabado de superficie @@ -8093,7 +8139,7 @@ usando el Espaciado X/Y dado TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Añade una Línea Central entre 2 Líneas @@ -8101,7 +8147,7 @@ usando el Espaciado X/Y dado TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Añade una Línea Central entre 2 puntos @@ -8117,7 +8163,7 @@ usando el Espaciado X/Y dado TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserta un Vértice Cosmético en una Vista @@ -8138,7 +8184,7 @@ usando el Espaciado X/Y dado TechDraw_FaceCenterLine - + Adds a Centerline to Faces Añade una Línea Central a las Caras @@ -8154,7 +8200,7 @@ usando el Espaciado X/Y dado TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserta Vértices Cosméticos en el Punto Medio de las aristas seleccionadas @@ -8162,7 +8208,7 @@ usando el Espaciado X/Y dado TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserta Vértices Cosméticos en los Puntos Cuadrantes de los círculos seleccionados @@ -8944,12 +8990,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw Dibujo técnico - + Add Cosmetic Circle Añadir círculo cosmético diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 9d0ed5b182..92eb2aafb7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Gehitu koadrante-erpinak @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Gehitu 2 lerroren arteko erdiko lerroa @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Gehitu 2 punturen arteko erdiko lerroa @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Gehitu lerro kosmetikoa 2 puntu zeharkatuta @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Txertatu oharpena @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Txertatu erdiko lerroa - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Kendu objektu kosmetikoa @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Gehitu erpin kosmetikoa @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Txertatu erpin kosmetikoa - + Add Cosmetic Vertex Gehitu erpin kosmetikoa @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aldatu lerroen itxura - + Change Appearance of selected Lines Aldatu hautatutako lerroen itxura @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Gehitu erdiko lerroa aurpegiei @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Gehitu gida-marra bistari @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Gehitu koadrante-erpinak @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Txertatu testu aberatseko oharpena @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Erakutsi/ezkutatu ertz ikusezinak @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Sortu gainazalaren amaierarako ikurra - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Hautatu bista bat<br> - egin klik botoi honetan<br> - irekitako panelean, hautatu gainazalaren amaierarako ikurraren atributuak @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Gehitu soldadura-informazioa gida-marrari @@ -1996,23 +1996,23 @@ Sortu kalkulu-orriaren bista - + Save page to dxf Gorde orria DXF fitxategi batean - + Add Midpoint Vertices Gehitu erdiko puntuko erpinak - + Add Quadrant Vertices Gehitu koadrante-erpinak - + Create Annotation Sortu oharpena @@ -2058,7 +2058,7 @@ Arrastatu kota - + Create Balloon Sortu bunbuiloa @@ -2073,8 +2073,8 @@ Sortu erdiko lerroa - + Create Cosmetic Line Sortu lerro kosmetikoa @@ -2415,7 +2415,7 @@ Pertsonalizatu formatua - + Surface Finish Symbols Gainazalaren amaierarako ikurrak @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Hautapen okerra @@ -2744,9 +2744,10 @@ Ez da profil-objekturik aurkitu hautapenean - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Hautapen okerra - + Select an object first Hautatu objektu bat - + Too many objects selected Objektu gehiegi hautatuta - + Create a page first. Lehenengo, sortu orrialde bat. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Ez dago piezaren bistarik hautapenean. @@ -2906,8 +2906,6 @@ Hautatutako ertza B-spline bat da. Erradioa gutxi gorabeherakoa izango da. Jarraitu? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Hautapen okerra @@ -3058,56 +3058,9 @@ Hautatu bi puntu-objektu eta bista bat. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Ataza abian - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Ataza abian + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Itxi ataza aktiboaren elkarrizketa-koadroa eta saiatu berriro. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Hautapen okerra - + Can not attach leader. No base View selected. Ezin da gida-marra erantsi. Ez da oinarrizko bistarik hautatu. - - - - + + + + You must select a base View for the line. Oinarrizko bista bat hautatu behar duzu lerrorako. - - + + No DrawViewPart objects in this selection Ez dago marrazki-piezaren bistarik hautapen honetan - - + + No base View in Selection. Ez dago oinarrizko bistarik hautapenean. - + You must select Faces or an existing CenterLine. Aurpegiak edo lehendik dagoen erdiko lerro bat hautatu behar duzu. - + No CenterLine in selection. Ez dago erdiko lerrorik hautapenean. - - - + + + Selection is not a CenterLine. Hautapena ez da erdiko lerroa. - + Selection not understood. Hautapena ez da ulertzen. - + You must select 2 Vertexes or an existing CenterLine. 2 erpin edo lehendik dagoen erdiko lerro bat hautatu behar duzu. - + Need 2 Vertices or 1 CenterLine. 2 erpin edo erdiko lerro 1 behar da. - - + + Selection is empty. Hautapena hutsik dago. - + Not enough points in selection. Ez dago nahiko punturik hautapenean. - + Selection is not a Cosmetic Line. Hautapena ez da lerro kosmetikoa. - + You must select 2 Vertexes. Bi erpin hautatu behar dituzu. - + You must select a base View for the circle. Oinarrizko bista bat hautatu behar duzu zirkulurako. - + Please select a center for the circle. Hautatu zirkulurako erdigune bat. - - + + Nothing selected Ez da ezer hautatu - + At least 1 object in selection is not a part view Hautapeneko objektu bat gutxienez ez da pieza-bista bat - + Unknown object type in selection Objektu-forma ezezaguna hautapenean - + No View in Selection. Ez dago bistarik hautapenean. - + You must select a View and/or lines. Bista bat eta/edo lerroak hautatu behar dituzu. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Ez dago pieza-bistarik hautapen honetan - + Select exactly one Leader line or one Weld symbol. Hautatu gida-marra bakar bat edo soldadura-ikur bakar bat. - - + + SurfaceFinishSymbols Gainazalen amaierarako ikurrak - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Ez dago pieza-bistarik hautapenean - + No %1 in Selection Ez dago %1 hautapenean @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Ziur zaude jarraitu nahi duzula? @@ -3459,9 +3469,9 @@ Testu aberatsaren sortzailea + - Rich text editor Testu aberatsaren editorea @@ -3579,8 +3589,8 @@ Editatu xehetasun-bista - + Edit %1 Editatu %1 @@ -3699,14 +3709,12 @@ Ez da azpielementurik hautatu - Selection is empty Hautapena hutsik dago - No object selected @@ -3748,12 +3756,12 @@ Hautatu 2 erpin edo ertz 1 - + Please select a Line Group Hautatu lerro-talde bat - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Editatu aurpegi-itzaleztadura - + Method Metodoa - + Addition Batuketa - + Average roughness Batez besteko zimurtasuna - + Roughness sampling length Zimurtasun-laginketaren luzera - + Lay symbol Ildasken ikurra - + Minimum roughness grade number Zimurtasunaren gradu-zenbaki minimoa - + Maximum roughness grade number Zimurtasunaren gradu-zenbaki maximoa @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Ezin da gida-marra hau ezabatu hautsi daitekeen soldadura-ikur bat duelako. - + You cannot delete this view because it has one or more dependent views that would become broken. Ezin da bista hau ezabatu, hautsita geratuko liratekeen mendeko bista bat edo gehiago dituelako. - + + + + - - - - - + + Object dependencies Objektuaren mendekotasunak @@ -7407,6 +7415,8 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. + + Top Goikoa @@ -7417,6 +7427,8 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. + + Left Ezkerrekoa @@ -7427,11 +7439,14 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. + + Right Eskuinekoa + Rear Atzekoa @@ -7442,6 +7457,8 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. + + Bottom Azpikoa @@ -7492,6 +7509,35 @@ emandako X/Y espazioa erabilita Vertical space between border of projections Proiekzioen ertzen arteko tarte bertikala + + + + FrontTopLeft + Aurreko goia ezkerra + + + + + FrontBottomRight + Aurreko behea eskuina + + + + + FrontTopRight + Aurreko goia eskuina + + + + + FrontBottomLeft + Aurreko behea ezkerra + + + + Front + Aurrekoa + TechDrawGui::TaskProjection @@ -7902,7 +7948,7 @@ emandako X/Y espazioa erabilita TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Gainazalaren amaierarako ikurrak @@ -8096,7 +8142,7 @@ emandako X/Y espazioa erabilita TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Erdiko lerro bat gehitzen du 2 lerroren artean @@ -8104,7 +8150,7 @@ emandako X/Y espazioa erabilita TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Erdiko lerro bat gehitzen du 2 punturen artean @@ -8120,7 +8166,7 @@ emandako X/Y espazioa erabilita TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Erpin kosmetikoa txertatzen du bista batean @@ -8141,7 +8187,7 @@ emandako X/Y espazioa erabilita TechDraw_FaceCenterLine - + Adds a Centerline to Faces Erdiko lerro bat gehitzen die aurpegiei @@ -8157,7 +8203,7 @@ emandako X/Y espazioa erabilita TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Erpin kosmetikoak txertatzen ditu hautatutako ertzen erdiko puntuan @@ -8165,7 +8211,7 @@ emandako X/Y espazioa erabilita TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Erpin kosmetikoak txertatzen ditu hautatutako zirkuluen koadrante-puntuetan @@ -8948,12 +8994,12 @@ elkarrizketa-koadroa irekita dagoelako. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Gehitu zirkulu kosmetikoa diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 1ef2f0e5d9..c77b5dca5d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Lisää keskilinja 2:n viivan väliin @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Lisää keskilinja 2:n pisteen väliin @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Lisää reunoihin keskipisteet @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Lisää kvadranttien pisteet @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Lisää keskilinja 2:n viivan väliin @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Lisää keskilinja 2:n pisteen väliin @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Lisää kosmeettinen viiva 2 pisteen kautta @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Lisää huomautus @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Lisää keskilinja - + Add Centerline to Faces Lisää keskiviiva pintaan @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Poista kosmeettinen objekti @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Lisää kosmeettinen apupiste @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Sijoita kosmeettinen apupiste - + Add Cosmetic Vertex Lisää kosmeettinen apupiste @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Muokkaa viivojen tyyliä - + Change Appearance of selected Lines Muuta valittujen viivojen tyyliä @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Lisää keskiviiva pintaan @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Lisää Reittiviiva näkymään @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Lisää reunoihin keskipisteet @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Lisää kvadranttien pisteet @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Lisää rich text -tekstimerkintä @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Näytä/piilota näkymättömät reunat @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Valitse näkymä <br> klikkaa tätä painiketta <br> valitse pinnanlaatu symboli valikosta @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Lisää hitsaustiedot Reittiviivaan @@ -1996,23 +1996,23 @@ Luo laskentataulukkonäkymä - + Save page to dxf Tallenna sivu dxf-muotoon - + Add Midpoint Vertices Lisää reunoihin keskipisteet - + Add Quadrant Vertices Lisää kvadranttien pisteet - + Create Annotation Lisää huomautus @@ -2058,7 +2058,7 @@ Raahaa Mittaa - + Create Balloon Luo tekstikupla @@ -2073,8 +2073,8 @@ Luo Keskilinja - + Create Cosmetic Line Luo kosmeettinen viiva @@ -2415,7 +2415,7 @@ Mukautettu muoto - + Surface Finish Symbols Pinnanlaatu symbolit @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Virheellinen valinta @@ -2744,9 +2744,10 @@ Valinnassa ei löytynyt profiiliobjektia - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Virheellinen valinta - + Select an object first Valitse ensin objekti - + Too many objects selected Liian monta objektia valittu - + Create a page first. Luo sivu ensin. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Valinnassa ei ole osan näkymää. @@ -2906,8 +2906,6 @@ Valittu reuna on BSpline, joten säteestä ei tule tarkkaa. Jatketaanko? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Virheellinen valinta @@ -3058,56 +3058,9 @@ Valitse 2 pistemäistä objektia ja 1 Näkymä. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Toiminto käynnissä - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Toiminto käynnissä + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Sulje aktiivisen toiminnon syöttöikkuna ja yritä uudelleen. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Väärä valinta - + Can not attach leader. No base View selected. Reittiviivaa ei voida kiinnittää mihinkään, koska Näkymää ei ole valittuna. - - - - + + + + You must select a base View for the line. Jokin Perusnäkymä pitää valita viivan kiinnitystä varten. - - + + No DrawViewPart objects in this selection Valinnassa ei ole DrawViewPart-tyyppistä objektia - - + + No base View in Selection. Valintaan ei kuulu pohjanäkymää. - + You must select Faces or an existing CenterLine. On valittava joko alue tai olemassaoleva keskilinja. - + No CenterLine in selection. Valintaan ei kuulu Keskilinjaa. - - - + + + Selection is not a CenterLine. Valinta ei ole Keskilinja. - + Selection not understood. Valintajoukko on käsittämätön. - + You must select 2 Vertexes or an existing CenterLine. On valittava joko 2 pistettä tai olemassaoleva keskilinja. - + Need 2 Vertices or 1 CenterLine. Tarvitaan 2 pistettä tai 1 keskilinja. - - + + Selection is empty. Mitään ei ole valittu. - + Not enough points in selection. Ei tarpeeksi pisteitä valinnassa. - + Selection is not a Cosmetic Line. Valinta ei ole kosmeettinen viiva. - + You must select 2 Vertexes. Ensin pitää valita 2 pistettä. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Mitään ei ole valittu - + At least 1 object in selection is not a part view Vähintään yksi valituista objekteista ei ole näkymä osista - + Unknown object type in selection Valittuna on tyypiltään tuntematon objekti - + No View in Selection. Valinnassa ei ole näkymää. - + You must select a View and/or lines. Ensin pitää valita Näkymä ja/tai viivoja. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Valinnassa ei ole Näkymää osista - + Select exactly one Leader line or one Weld symbol. Valitse tämälleen yksi Reittiviiva tai yksi Hitsaussymboli. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Haluatko varmasti jatkaa? @@ -3459,9 +3469,9 @@ RTF-tekstin luonti + - Rich text editor RTF-tekstin editori @@ -3579,8 +3589,8 @@ Muokkaa Detaljinäkymää - + Edit %1 Muokkaa %1 @@ -3699,14 +3709,12 @@ Alielementtejä ei ole valittu - Selection is empty Valinta on tyhjä - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Menetelma - + Addition Lisäys - + Average roughness Average roughness - + Roughness sampling length Pinnanlaadun vaikutusalue - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Tätä Reittiviivaa ei voi poistaa, koska siihen on liitetty hitsaussymboli, joka rikkoutuisi. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Objektin riippuvuudet @@ -7396,6 +7404,8 @@ Valitsemalla lisäpisteitä syntyy viivasegmenttejä. + + Top Yläpuoli @@ -7406,6 +7416,8 @@ Valitsemalla lisäpisteitä syntyy viivasegmenttejä. + + Left Vasen @@ -7416,11 +7428,14 @@ Valitsemalla lisäpisteitä syntyy viivasegmenttejä. + + Right Oikea + Rear Takana @@ -7431,6 +7446,8 @@ Valitsemalla lisäpisteitä syntyy viivasegmenttejä. + + Bottom Pohja @@ -7481,6 +7498,35 @@ käyttäen annettuja X/Y-välimatkoja Vertical space between border of projections Pystysuuntainen tila projektioiden reunojen välissä + + + + FrontTopLeft + Etu-ylä-vasen + + + + + FrontBottomRight + Etu-ala-oikea + + + + + FrontTopRight + Etu-ylä-oikea + + + + + FrontBottomLeft + Etu-ala-vasen + + + + Front + Etupuoli + TechDrawGui::TaskProjection @@ -7891,7 +7937,7 @@ käyttäen annettuja X/Y-välimatkoja TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Pinnanlaatu symbolit @@ -8085,7 +8131,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Lisää keskilinjan kahden viivan väliin @@ -8093,7 +8139,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Lisää keskilinjan 2:n pisteen väliin @@ -8109,7 +8155,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Sijoittaa kosmeettisen apupisteen näkymään @@ -8130,7 +8176,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_FaceCenterLine - + Adds a Centerline to Faces Lisää keskilinjan alueisiin @@ -8146,7 +8192,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Lisää kosmeettiset apupisteet valittujen reunojen keskipisteisiin @@ -8154,7 +8200,7 @@ käyttäen annettuja X/Y-välimatkoja TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Lisää kosmeettiset apupisteet valittujen ympyröiden kvadranttipisteisiin @@ -8936,12 +8982,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Lisää apugeometria ympyrä diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 22fb2c1903..a9c2e69ce6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Ligne centrale entre 2 lignes @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Ajouter une ligne centrale entre 2 points @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Ajouter des sommets intermédiaires @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Ajouter des sommets quadrants @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Ligne centrale entre 2 lignes @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Ajouter une ligne centrale entre 2 points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Ajouter une ligne cosmétique par 2 points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insérer une annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insérer une ligne centrale - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Supprimer l'objet cosmétique @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Ajouter un sommet cosmétique @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Ajouter un sommet cosmétique - + Add Cosmetic Vertex Ajouter un sommet cosmétique @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Changer l'apparence des lignes - + Change Appearance of selected Lines Changer l'apparence des lignes sélectionnées @@ -1544,12 +1544,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Ajouter une ligne centrale à des faces @@ -1651,12 +1651,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Insérer une ligne de référence à la vue @@ -1690,12 +1690,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Ajouter des sommets intermédiaires @@ -1783,12 +1783,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Ajouter des sommets quadrants @@ -1822,12 +1822,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insérer une annotation de texte enrichi @@ -1871,12 +1871,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Afficher/masquer les arrêtes invisibles @@ -1987,17 +1987,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Créer un symbole de finition de surface - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Sélectionnez une vue - Cliquez sur ce bouton @@ -2083,12 +2083,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Ajouter les informations de soudure à la ligne de référence @@ -2147,23 +2147,23 @@ Créer une vue de feuille de calcul - + Save page to dxf Enregistrer la page en dxf - + Add Midpoint Vertices Ajouter des sommets intermédiaires - + Add Quadrant Vertices Ajouter des sommets quadrants - + Create Annotation Créer une annotation @@ -2209,7 +2209,7 @@ Faire glisser la cote - + Create Balloon Créer une infobulle @@ -2224,8 +2224,8 @@ Créer une trait d'axe - + Create Cosmetic Line Créer une ligne cosmétique @@ -2566,7 +2566,7 @@ Format personnalisé - + Surface Finish Symbols Symboles de finition de surface @@ -2745,7 +2745,7 @@ Text background color - Couleur de l'arrière-plan du texte + Couleur d'arrière-plan du texte @@ -2837,16 +2837,6 @@ QObject - - - - - - - - - - @@ -2864,6 +2854,16 @@ + + + + + + + + + + Wrong selection Sélection invalide @@ -2895,9 +2895,10 @@ Aucun objet de profil trouvé dans la sélection - - - + + + + @@ -2909,34 +2910,34 @@ - - - - + + + Incorrect selection Sélection non valide - + Select an object first Sélectionner d’abord un objet - + Too many objects selected Trop d'éléments sélectionnés - + Create a page first. Créer d'abord une page. + @@ -2945,7 +2946,6 @@ - No View of a Part in selection. Aucune vue d'une pièce dans la sélection. @@ -3057,8 +3057,6 @@ Le bord sélectionné est un BSpline. Le rayon sera approximatif. Continuer ? - - @@ -3078,10 +3076,12 @@ + + + - Incorrect Selection Sélection non valide @@ -3209,56 +3209,9 @@ Sélectionnez des objets à 2 points et 1 vue. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tâche en cours - - @@ -3275,6 +3228,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tâche en cours + + + + + + + + + + + + + + + + + + + + + @@ -3285,11 +3288,6 @@ - - - - - @@ -3297,190 +3295,202 @@ - - - + + + + + Close active task dialog and try again. Fermer la boîte de dialogue des tâches actives et réessayer. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Sélection incorrecte - + Can not attach leader. No base View selected. Impossible d'attacher la référence. Aucune vue de base sélectionnée. - - - - + + + + You must select a base View for the line. Vous devez sélectionner une vue de base pour la ligne. - - + + No DrawViewPart objects in this selection Aucun objet DrawViewPart dans cette sélection - - + + No base View in Selection. Aucune Vue de base dans la sélection. - + You must select Faces or an existing CenterLine. Vous devez sélectionner des faces ou une ligne centrale existante. - + No CenterLine in selection. Pas de ligne centrale dans la sélection. - - - + + + Selection is not a CenterLine. La sélection n'est pas une ligne centrale. - + Selection not understood. Sélection non comprise. - + You must select 2 Vertexes or an existing CenterLine. Vous devez sélectionner 2 sommets ou une ligne centrale existante. - + Need 2 Vertices or 1 CenterLine. Exige 2 sommets ou 1 ligne centrale. - - + + Selection is empty. La sélection est vide. - + Not enough points in selection. Pas assez de points dans la sélection. - + Selection is not a Cosmetic Line. La sélection n'est pas une ligne cosmétique. - + You must select 2 Vertexes. Vous devez sélectionner 2 sommets. - + You must select a base View for the circle. Vous devez sélectionner une vue de base pour le cercle. - + Please select a center for the circle. Sélectionner un centre pour le cercle. - - + + Nothing selected Aucune sélection - + At least 1 object in selection is not a part view Au moins 1 objet dans la sélection n'est pas une vue de pièce - + Unknown object type in selection Type d'objet inconnu dans la sélection - + No View in Selection. Aucune vue dans la sélection. - + You must select a View and/or lines. Vous devez sélectionner une vue et/ou des lignes. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. La sélection n'est pas un cercle cosmétique ou un arc cosmétique du cercle. - + No Part Views in this selection Pas de vue dans la sélection - + Select exactly one Leader line or one Weld symbol. Sélectionnez exactement une ligne de repère ou un symbole de soudure. - - + + SurfaceFinishSymbols Symboles d'état de surface - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Pas de vue de la pièce dans la sélection - + No %1 in Selection %1 n'est pas dans la sélection @@ -3574,8 +3584,8 @@ - + Are you sure you want to continue? Êtes-vous sûr de vouloir continuer ? @@ -3610,9 +3620,9 @@ Créateur de texte enrichi + - Rich text editor Éditeur de texte enrichi @@ -3730,8 +3740,8 @@ Modifier la vue détaillée - + Edit %1 Modifier %1 @@ -3850,14 +3860,12 @@ Aucun sous-élément sélectionné - Selection is empty La sélection est vide - No object selected @@ -3899,12 +3907,12 @@ Sélectionner 2 sommets ou 1 arête - + Please select a Line Group Sélectionner un groupe de lignes - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3925,37 +3933,37 @@ thick: %4 Modifier les hachures de la face - + Method Méthode - + Addition Surépaisseur d'usinage - + Average roughness Rugosité moyenne - + Roughness sampling length Longueur d’échantillonnage de la rugosité - + Lay symbol Symbole de stries - + Minimum roughness grade number Indice minimum de la rugosité - + Maximum roughness grade number Indice maximum de rugosité @@ -4004,29 +4012,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Vous ne pouvez pas supprimer cette ligne de référence car elle comporte un symbole de soudure qui se casserait. - + You cannot delete this view because it has one or more dependent views that would become broken. Vous ne pouvez pas supprimer cette vue car elle possède une ou plusieurs vues dépendantes qui deviendraient orphelines. - + + + + - - - - - + + Object dependencies Dépendances des objets @@ -4094,7 +4102,7 @@ it has a tile weld that would become broken. If Crop Image is checked, crop captured image to this width. - Si Recadrer l'Image est cochée, recadre l'image capturée à cette largeur. + Si Recadrer l'image est cochée, cela recadrera l'image capturée à cette largeur. @@ -4114,7 +4122,7 @@ it has a tile weld that would become broken. If Crop Image is checked, crop captured image to this height. - Si Recadrer l'Image est cochée, recadre l'image capturée à cette hauteur. + Si Recadrer l'image est cochée, cela recadrera l'image capturée à cette hauteur. @@ -4359,7 +4367,7 @@ Ce répertoire sera utilisé pour la sélection des symboles. line segments returned by the hidden line removal algorithm. Faces must be detected in order to use hatching, but there can be a performance penalty in complex models. - Si cette case est cochée, TechDraw tentera de créer des faces en utilisant les segments de ligne renvoyés par l'algorithme de suppression des lignes cachées. Les faces doivent être détectées pour utiliser les hachures, mais il peut y avoir une baisse des performances dans les modèles complexes. + Si cette option est cochée, TechDraw tentera de créer des faces en utilisant les segments de ligne renvoyés par l'algorithme de suppression des lignes cachées. Les faces doivent être détectées pour utiliser les hachures, mais il peut y avoir une baisse des performances dans les modèles complexes. @@ -4443,7 +4451,7 @@ Une unité correspond environ à 0,1 mm de largeur. If checked, system will attempt to automatically correct dimension references when the model changes. - Si cette case est cochée, le système tentera de corriger automatiquement les références des cotes lorsque le modèle changera. + Si cette option est cochée, le système tentera de corriger automatiquement les références des cotes lorsque le modèle changera. @@ -4498,8 +4506,8 @@ when hatching a face with a PAT pattern If checked, FreeCAD will use the new face finder algorithm. If not checked, FreeCAD will use the original face finder. - Si cette case est cochée, FreeCAD utilisera le nouvel algorithme de reconnaissance de faces. -Si cette case n'est pas cochée, FreeCAD utilisera l'algorithme d'origine de reconnaissance de faces. + Si cette option est cochée, FreeCAD utilisera le nouvel algorithme de reconnaissance des faces. +Si cette option n'est pas cochée, FreeCAD utilisera l'algorithme d'origine de reconnaissance des faces. @@ -4986,7 +4994,7 @@ un dessin comme guide de coupe 1:1. If checked FreeCAD will use a single color for all text and lines. - Si case est cochée, FreeCAD utilisera une seule couleur pour tous les textes et toutes les lignes. + Si cette option est cochée, FreeCAD utilisera une seule couleur pour tous les textes et toutes les lignes. @@ -6854,7 +6862,7 @@ par la valeur négative de la "Tolérance supérieure". If checked the content of 'Format Spec' will be used instead of the dimension value - Si cette case est cochée, le contenu de la "spécification de format" sera utilisé à la place de la valeur de la cote + Si cette option est cochée, le contenu de la "spécification de format" sera utilisé à la place de la valeur de la cote. @@ -6884,8 +6892,8 @@ be used instead of the dimension value <html><head/><body><p>If checked the content of tolerance format spec will</p><p>be used instead of the tolerance value</p></body></html> - Si cette case est cochée, le contenu de la spécification du format -de la tolérance sera utilisé à la place de la valeur de la tolérance + Si cette option est cochée, le contenu de la spécification du format +de la tolérance sera utilisé à la place de la valeur de la tolérance. @@ -6960,8 +6968,8 @@ de la tolérance sera utilisé à la place de la valeur de la tolérance Use override angles if checked. Use default angles if unchecked. - Utilise les angles définis par l'utilisateur si la case est cochée. -Utilise les angles par défaut si cette case n'est pas cochée. + Utilise les angles définis par l'utilisateur si cette option est cochée. +Utilise les angles par défaut si cette option n'est pas cochée. @@ -7549,6 +7557,8 @@ Vous pouvez sélectionner d'autres points pour obtenir des segments de ligne. + + Top Dessus @@ -7559,6 +7569,8 @@ Vous pouvez sélectionner d'autres points pour obtenir des segments de ligne. + + Left Gauche @@ -7569,11 +7581,14 @@ Vous pouvez sélectionner d'autres points pour obtenir des segments de ligne. + + Right Droit + Rear Arrière @@ -7584,6 +7599,8 @@ Vous pouvez sélectionner d'autres points pour obtenir des segments de ligne. + + Bottom Dessous @@ -7634,6 +7651,35 @@ en utilisant l'espacement X/Y donné Vertical space between border of projections Espace vertical entre la bordure des projections + + + + FrontTopLeft + Avant en haut à gauche + + + + + FrontBottomRight + Avant en bas à droite + + + + + FrontTopRight + Avant en haut à droite + + + + + FrontBottomLeft + Avant en bas à gauche + + + + Front + Face + TechDrawGui::TaskProjection @@ -8045,7 +8091,7 @@ Peut être lent pour les modèles complexes. TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Symboles de finition de surface @@ -8239,7 +8285,7 @@ Peut être lent pour les modèles complexes. TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Ajoute une ligne centrale entre 2 lignes @@ -8247,7 +8293,7 @@ Peut être lent pour les modèles complexes. TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Ajoute une ligne centrale entre 2 points @@ -8263,7 +8309,7 @@ Peut être lent pour les modèles complexes. TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insère un sommet cosmétique dans une vue @@ -8286,7 +8332,7 @@ Peut être lent pour les modèles complexes. TechDraw_FaceCenterLine - + Adds a Centerline to Faces Ajoute une Ligne Centrale aux faces @@ -8302,7 +8348,7 @@ Peut être lent pour les modèles complexes. TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insère des sommets cosmétiques au milieu des arêtes sélectionnées @@ -8310,7 +8356,7 @@ Peut être lent pour les modèles complexes. TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insère des sommets cosmétiques aux points de quadrant des cercles sélectionnés @@ -9092,12 +9138,12 @@ il y a une tâche en cours. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Cercle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index 71dee5c638..ef8e9e7933 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Engade unha liña central entre 2 liñas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Engade a liña central entre 2 puntos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Engadir vértices de medio punto @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Engadir vértices de cuadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Engade unha liña central entre 2 liñas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Engade a liña central entre 2 puntos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insire apuntamento @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Remove Cosmetic Object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Engadir vértices de medio punto @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Engadir vértices de cuadrante @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices Engadir vértices de medio punto - + Add Quadrant Vertices Engadir vértices de cuadrante - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Escolma errada @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selección incorrecta - + Select an object first Primeiro escolme un obxecto - + Too many objects selected Demasiados obxectos escolmados - + Create a page first. Primeiro, cree unha páxina. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Sen vista da peza en selección. @@ -2906,8 +2906,6 @@ O bordo escolmado é unha BSpline. O Radio será aproximado. Dámoslle? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selección Incorrecta @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tarefa en Progreso - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tarefa en Progreso + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Pechar o cadro de diálogo e tentalo outra vez. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Imposible adxuntar lider. Na vista escolmada. - - - - + + + + You must select a base View for the line. Debes escolmar unha Vista base para a liña. - - + + No DrawViewPart objects in this selection Sen obxectos DrawViewPart na escolma - - + + No base View in Selection. Sen Vista base na Selección. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nada escolmado - + At least 1 object in selection is not a part view Ao menos 1 obxecto da escolma non é unha vista parcial - + Unknown object type in selection Tipo de obxecto descoñecido na escolma - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Are you sure you want to continue? @@ -3459,9 +3469,9 @@ Creador de texto enriquecido + - Rich text editor Editor de texto enriquecido @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Editar %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Método - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Dependencias do obxecto @@ -7406,6 +7414,8 @@ You can pick further points to get line segments. + + Top Enriba @@ -7416,6 +7426,8 @@ You can pick further points to get line segments. + + Left Esquerda @@ -7426,11 +7438,14 @@ You can pick further points to get line segments. + + Right Dereita + Rear Traseira @@ -7441,6 +7456,8 @@ You can pick further points to get line segments. + + Bottom Embaixo @@ -7491,6 +7508,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Fronte + TechDrawGui::TaskProjection @@ -7901,7 +7947,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8095,7 +8141,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8103,7 +8149,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8119,7 +8165,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8140,7 +8186,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8156,7 +8202,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8164,7 +8210,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8947,12 +8993,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 9732dfc6b6..fa0ff25268 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Tehničko Crtanje - + Add Cosmetic Line Through 2 Points Dodaj dekoracijsku liniju kroz 2 točke @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Tehničko Crtanje - + Insert Annotation Umetanje napomene @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Tehničko Crtanje - + Insert Center Line Umetnite središnju liniju - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Tehničko Crtanje - + Remove Cosmetic Object Ukloni pomoćni objekt @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Tehničko Crtanje - + Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Tehničko Crtanje - + Insert Cosmetic Vertex Umetni pomoćnu tjemenu točku - + Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Tehničko Crtanje - + Change Appearance of Lines Promijenite izgled linija - + Change Appearance of selected Lines Promjena izgleda odabranih linija @@ -1409,12 +1409,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Tehničko Crtanje - + Add Centerline to Faces Dodaj simetralu na lice(a) @@ -1516,12 +1516,12 @@ CmdTechDrawLeaderLine - + TechDraw Tehničko Crtanje - + Add Leaderline to View Dodaj liniju oznake u Pogled @@ -1555,12 +1555,12 @@ CmdTechDrawMidpoints - + TechDraw Tehničko Crtanje - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba @@ -1648,12 +1648,12 @@ CmdTechDrawQuadrants - + TechDraw Tehničko Crtanje - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove @@ -1687,12 +1687,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Tehničko Crtanje - + Insert Rich Text Annotation Umetni raskošni tekst napomenu @@ -1736,12 +1736,12 @@ CmdTechDrawShowAll - + TechDraw Tehničko Crtanje - + Show/Hide Invisible Edges Prikaži / sakrij nevidljive rubove @@ -1852,17 +1852,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Tehničko Crtanje - + Create a Surface Finish Symbol Napravi simbol površinske završne obrade - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Odaberite prikaz<br> - kliknite ovaj gumb<br> - odaberite atribute simbola površinske završne obrade u otvorenom panelu @@ -1948,12 +1948,12 @@ CmdTechDrawWeldSymbol - + TechDraw Tehničko Crtanje - + Add Welding Information to Leaderline Dodaj informaciju spajanja na liniju oznake @@ -2012,23 +2012,23 @@ Stvori pogled pregleda - + Save page to dxf Spremi stranicu u dxf formatu - + Add Midpoint Vertices Dodajte pomoćne točke na sredinu ruba - + Add Quadrant Vertices Dodajte kvadrantne pomoćne točke na rubove - + Create Annotation Stvori Napomenu @@ -2074,7 +2074,7 @@ Povuci Dimenziju - + Create Balloon Stvori Balončić @@ -2089,8 +2089,8 @@ Stvori središnju Liniju - + Create Cosmetic Line Stvori Dekoracijsku liniju @@ -2435,7 +2435,7 @@ Prilagodi format - + Surface Finish Symbols Oznaka površine (kvalitete) završne obrade @@ -2706,16 +2706,6 @@ QObject - - - - - - - - - - @@ -2733,6 +2723,16 @@ + + + + + + + + + + Wrong selection Pogrešan odabir @@ -2764,9 +2764,10 @@ U ovom odabiru nema Objekta profila - - - + + + + @@ -2778,34 +2779,34 @@ - - - - + + + Incorrect selection Netočan odabir - + Select an object first Najprije odaberite objekt - + Too many objects selected Previše objekata odabrano - + Create a page first. Najprije napravite stranicu. + @@ -2814,7 +2815,6 @@ - No View of a Part in selection. Ne postoji Pogled na Dio u odabiru. @@ -2927,8 +2927,6 @@ Odabrani rub je BSpline. Polumjer će biti približan. Nastaviti? - - @@ -2948,10 +2946,12 @@ + + + - Incorrect Selection Netočan odabir @@ -3079,56 +3079,9 @@ Odaberite 2 objekta Točke i 1 Pogled.(2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Rješavanje u postupku - - @@ -3145,6 +3098,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Rješavanje u postupku + + + + + + + + + + + + + + + + + + + + + @@ -3155,11 +3158,6 @@ - - - - - @@ -3167,191 +3165,203 @@ - - - + + + + + Close active task dialog and try again. Zatvori aktivni dijalog rješavača i pokušaj ponovo. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Pogrešan odabir - + Can not attach leader. No base View selected. Ne može se priložiti prednjak. Nije odabran nijedan osnovni prikaz. - - - - + + + + You must select a base View for the line. Morate odabrati osnovni prikaz za redak. - - + + No DrawViewPart objects in this selection Nema DrawViewPart objekata u ovom odabiru - - + + No base View in Selection. Nema osnovnog pogleda u odabiru. - + You must select Faces or an existing CenterLine. Morate odabrati Lica ili postojeću Srednju liniju. - + No CenterLine in selection. Nema Srednje linije u odabiru. - - - + + + Selection is not a CenterLine. Odabir nije Srednja linija. - + Selection not understood. Odabir nije razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Morate odabrati 2 tjemene točke ili postojeću Srednju liniju. - + Need 2 Vertices or 1 CenterLine. Potrebna su 2 Vrha ili 1 Srednja linija - - + + Selection is empty. Odabir je prazan. - + Not enough points in selection. Nema dovoljno točaka u odabiru. - + Selection is not a Cosmetic Line. Odabir nije Dekoracijska linija - + You must select 2 Vertexes. Morate odabrati 2 tjemene točke. - + You must select a base View for the circle. Morate odabrati osnovni prikaz za krug. - + Please select a center for the circle. Molimo odaberite središte za krug. - - + + Nothing selected Ništa nije odabrano - + At least 1 object in selection is not a part view Najmanje 1 predmet u odabiru nije Prikaz dijelova - + Unknown object type in selection Nepoznata vrsta objekta u izboru - + No View in Selection. Nema pogleda u odabiru. - + You must select a View and/or lines. Morate odabrati jedan Pogled i / ili linije. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Odabrano nije pomoćni krug ili pomoćni luk kruga. - + No Part Views in this selection Nema Pogleda djelova u ovom odabiru - + Select exactly one Leader line or one Weld symbol. Odaberite samo jednu liniju oznake ili simbol spajanja. - - + + SurfaceFinishSymbols Simboli za završnu obradu površine - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Nema pogleda na Dio u doabiru - + No %1 in Selection Nema %1 u odabiru @@ -3445,8 +3455,8 @@ - + Are you sure you want to continue? Jeste li sigurni da želite nastaviti? @@ -3481,9 +3491,9 @@ Rich-Text stvaralac + - Rich text editor Rich-Text uređivač @@ -3601,8 +3611,8 @@ Uredite detaljni pogled - + Edit %1 Uređivanje %1 @@ -3723,14 +3733,12 @@ Nema izabranih podelemenata - Selection is empty Odabir je prazan - No object selected @@ -3772,12 +3780,12 @@ Odaberi 2 tjemene točke ili 1 rub - + Please select a Line Group Odaberite Grupu linija - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3798,37 +3806,37 @@ thick: %4 Uredi ispunjavanje uzorkom - + Method Metoda - + Addition Dodatak - + Average roughness Prosječna hrapavost - + Roughness sampling length Duljina uzorkovanja hrapavosti - + Lay symbol Postavi simbol - + Minimum roughness grade number Minimalni broj stupnja hrapavosti - + Maximum roughness grade number Maksimalni broj stupnja hrapavosti @@ -3877,7 +3885,7 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Ne možete izbrisati ovu liniju vodilicu jer @@ -3886,22 +3894,22 @@ ima simbol spajanja koji bi se pokidao. - + You cannot delete this view because it has one or more dependent views that would become broken. Ne možete izbrisati ovaj pogled jer ima jedan ili više ovisnih prikaza koji bi se slomili. - + + + + - - - - - + + Object dependencies Zavisnosti objekta @@ -7491,6 +7499,8 @@ Možete odabrati daljnje točke da biste dobili segmente linija. + + Top Gore @@ -7501,6 +7511,8 @@ Možete odabrati daljnje točke da biste dobili segmente linija. + + Left Lijevo @@ -7511,11 +7523,14 @@ Možete odabrati daljnje točke da biste dobili segmente linija. + + Right Desno + Rear Iza @@ -7526,6 +7541,8 @@ Možete odabrati daljnje točke da biste dobili segmente linija. + + Bottom Ispod @@ -7576,6 +7593,35 @@ koristeći zadani X/Y razmak Vertical space between border of projections Vertikalni prostor između granica projekcija + + + + FrontTopLeft + NapredOdozgoLijevo + + + + + FrontBottomRight + NapredDoljeDesno + + + + + FrontTopRight + NapredOdozgoDesno + + + + + FrontBottomLeft + NapredDoljeLijevo + + + + Front + Ispred + TechDrawGui::TaskProjection @@ -7989,7 +8035,7 @@ koristeći zadani X/Y razmak TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Oznaka površine (kvalitete) završne obrade @@ -8183,7 +8229,7 @@ koristeći zadani X/Y razmak TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodajte središnju liniju između dvije linije @@ -8191,7 +8237,7 @@ koristeći zadani X/Y razmak TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodajte središnju liniju između dvije točke @@ -8207,7 +8253,7 @@ koristeći zadani X/Y razmak TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Umetnite dekorativne tjemene točke u pogled @@ -8228,7 +8274,7 @@ koristeći zadani X/Y razmak TechDraw_FaceCenterLine - + Adds a Centerline to Faces Dodaj simetralu na lice(a) @@ -8244,7 +8290,7 @@ koristeći zadani X/Y razmak TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Umetanje dekoracija vrhova u sredinu odabranih rubova @@ -8252,7 +8298,7 @@ koristeći zadani X/Y razmak TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Umetanje dekoracija vrhova u kvadratne točke odabranih krugova @@ -9039,12 +9085,12 @@ jer je otvoren dijalog zadataka. CmdTechDrawCosmeticCircle - + TechDraw Tehničko Crtanje - + Add Cosmetic Circle Dodaj dekorativni krug diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index 9acd8b54a2..50a1f2c071 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Középvonal hozzáadása 2 egyenes között @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Középvonal hozzáadása 2 pont között @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Középponti csúcspontok hozzáadása @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Negyedelő csúcspontok hozzáadása @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Lines Középvonal hozzáadása 2 egyenes között @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw MűszakiRajz - + Add Centerline between 2 Points Középvonal hozzáadása 2 pont között @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw MűszakiRajz - + Add Cosmetic Line Through 2 Points Két pont általi segéd vonal beszúrása @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw MűszakiRajz - + Insert Annotation Széljegyzet beszúrása @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw MűszakiRajz - + Insert Center Line Középvonal beszúrása - + Add Centerline to Faces Középvonal hozzáadása a felületekhez @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw MűszakiRajz - + Remove Cosmetic Object Segéd tárgy eltávolítása @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw MűszakiRajz - + Add Cosmetic Vertex Segéd csúcspont hozzáadása @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw MűszakiRajz - + Insert Cosmetic Vertex Segéd csúcspont beillesztése - + Add Cosmetic Vertex Segéd csúcspont hozzáadása @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw MűszakiRajz - + Change Appearance of Lines Egyenesek megjelenésének módosítása - + Change Appearance of selected Lines Kiválasztott egyenesek megjelenésének módosítása @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw MűszakiRajz - + Add Centerline to Faces Középvonal hozzáadása a felületekhez @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw MűszakiRajz - + Add Leaderline to View Referenciavonal hozzáadása a nézethez @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw MűszakiRajz - + Add Midpoint Vertices Középponti csúcspontok hozzáadása @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw MűszakiRajz - + Add Quadrant Vertices Negyedelő csúcspontok hozzáadása @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw MűszakiRajz - + Insert Rich Text Annotation Szöveges jegyzet beszúrása @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw MűszakiRajz - + Show/Hide Invisible Edges Láthatatlan élek megjelenítése/elrejtése @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw MűszakiRajz - + Create a Surface Finish Symbol Felületkezelési szimbólum létrehozása - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Válasszon ki egy nézetet<br> - kattintson erre a gombra<br> - válassza ki a felületkezelési szimbólum attribútumait a megnyitott panelen @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw MűszakiRajz - + Add Welding Information to Leaderline Hegesztési információk hozzáadása a referenciavonalhoz @@ -1996,23 +1996,23 @@ Számolótábla nézet létrehozása - + Save page to dxf Oldal mentése dxf-be - + Add Midpoint Vertices Középponti csúcspontok hozzáadása - + Add Quadrant Vertices Negyedelő csúcspontok hozzáadása - + Create Annotation Széljegyzet létrehozása @@ -2058,7 +2058,7 @@ Dimenzió húzása - + Create Balloon Ballon létrehozása @@ -2073,8 +2073,8 @@ Középvonal létrehozása - + Create Cosmetic Line Segédvonal létrehozása @@ -2415,7 +2415,7 @@ Formátum hozzáigazítása - + Surface Finish Symbols Felületkijelölő szimbólumok @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Rossz kijelölés @@ -2744,9 +2744,10 @@ Nem található profiltárgy a kijelölésben - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Hibás kijelölés - + Select an object first Először válasszon ki egy tárgyat - + Too many objects selected Túl sok kijelölt objektum - + Create a page first. Először hozzon létre egy oldalt. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Nincs alkatrész nézet ebben a kiválasztásban. @@ -2906,8 +2906,6 @@ A kijelölt él egy folyamatos ív. A sugár hozzávetőleges érték lesz. Folytatja? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Hibás kijelölés @@ -3058,56 +3058,9 @@ Jelöljön ki 2 pontos objektumokat és 1 nézetet. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - A feladat folyamatban - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + A feladat folyamatban + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Zárja be az aktív feladatot és próbálja később. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Hibás kijelölés - + Can not attach leader. No base View selected. A vezér egyenest nem tudja csatolni. Nem lett kiválasztva alapértelmezett nézet. - - - - + + + + You must select a base View for the line. Alapértelmezett nézetet kell kiválasztania az egyeneshez. - - + + No DrawViewPart objects in this selection A kijelölt részen nem található DrawViewPart objektum - - + + No base View in Selection. Nincs alapnézet a kijelölésben. - + You must select Faces or an existing CenterLine. Ki kell választania a felületeket vagy egy meglévő Középvonalat. - + No CenterLine in selection. Középvonal nincs a kiválasztásban. - - - + + + Selection is not a CenterLine. A kijelölés nem középvonal. - + Selection not understood. A kiválasztás nem érthető. - + You must select 2 Vertexes or an existing CenterLine. Ki kell jelölnie a 2 csúcspontot vagy egy meglévő Középvonalat. - + Need 2 Vertices or 1 CenterLine. Szüksége van 2 csúcsora vagy 1 Középvonalra. - - + + Selection is empty. Nincs kiválasztva semmi. - + Not enough points in selection. Nincs elég pont a kiválasztásban. - + Selection is not a Cosmetic Line. A kiválasztás nem segéd vonal. - + You must select 2 Vertexes. Két csúcspontot kell kijelölnie. - + You must select a base View for the circle. Alapértelmezett nézetet kell kiválasztania a körhöz. - + Please select a center for the circle. Kérjük, válassza ki a kör középpontját. - - + + Nothing selected Semmi sincs kiválasztva - + At least 1 object in selection is not a part view Legalább 1 objektum a kijelölt részen nem egy résznézet - + Unknown object type in selection Ismeretlen típusú tárgy a kiválasztásban - + No View in Selection. Nincs alapnézet a kijelölésben. - + You must select a View and/or lines. Ki kell jelölnie egy nézetet és/vagy vonalakat. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. A kiválasztás nem segédkör vagy segéd körív. - + No Part Views in this selection Nincs résznézet ebben a kijelölésben - + Select exactly one Leader line or one Weld symbol. Jelöljön ki pontosan egy referenciavonalat vagy egy Hegesztés szimbólumot. - - + + SurfaceFinishSymbols Felületi szimbólumok - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Nincs alkatrész nézet a kijelölésben - + No %1 in Selection A %1 nincs a kiválasztásban @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Biztosan folytatja? @@ -3459,9 +3469,9 @@ Szöveg szerkesztő + - Rich text editor Szöveg szerkesztő @@ -3579,8 +3589,8 @@ Részletnézet szerkesztése - + Edit %1 %1 szerkesztése @@ -3699,14 +3709,12 @@ Nincsenek részelemek kiválasztva - Selection is empty A kijelölési terület nem tartalmaz objektumokat - No object selected @@ -3748,12 +3756,12 @@ 2 csúcspont vagy 1 él kiválasztása - + Please select a Line Group Kérem válaszd ki a vonal csoportot - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ vastag: %4 Felület kitöltés szerkesztés - + Method Módszer - + Addition Kiegészítő - + Average roughness Átlagos érdesség - + Roughness sampling length Érdesség mintavételi hossza - + Lay symbol Irányultsági jel - + Minimum roughness grade number Minimális érdességi osztályszám - + Maximum roughness grade number Maximális érdességi osztályszám @@ -3853,29 +3861,29 @@ vastag: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nem törölheti ezt a referencia vonalat, mert olyan hegesztési szimbólummal rendelkezik, amely megtörne. - + You cannot delete this view because it has one or more dependent views that would become broken. Nem törölheti ezt a nézetet, mert egy vagy több nézetnek függősége van, amely megszakadna. - + + + + - - - - - + + Object dependencies Objektumfüggőségek @@ -7399,6 +7407,8 @@ További pontokat is választhatsz, hogy vonalszakaszokat kapj. + + Top Felülnézet @@ -7409,6 +7419,8 @@ További pontokat is választhatsz, hogy vonalszakaszokat kapj. + + Left Bal @@ -7419,11 +7431,14 @@ További pontokat is választhatsz, hogy vonalszakaszokat kapj. + + Right Jobb oldalnézet + Rear Hátsó nézet @@ -7434,6 +7449,8 @@ További pontokat is választhatsz, hogy vonalszakaszokat kapj. + + Bottom Alsó @@ -7484,6 +7501,35 @@ a megadott X/Y távolság használatával Vertical space between border of projections Függőleges tér a vetületek határai között + + + + FrontTopLeft + ElölFellülBalra + + + + + FrontBottomRight + ElölAllulJobbra + + + + + FrontTopRight + ElölFellülJobbra + + + + + FrontBottomLeft + ElölAllulBalra + + + + Front + Elölnézet + TechDrawGui::TaskProjection @@ -7894,7 +7940,7 @@ a megadott X/Y távolság használatával TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Felületkijelölő szimbólumok @@ -8088,7 +8134,7 @@ a megadott X/Y távolság használatával TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Egy középvonal hozzáadása 2 egyenes között @@ -8096,7 +8142,7 @@ a megadott X/Y távolság használatával TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Egy középvonal hozzáadása 2 pont között @@ -8112,7 +8158,7 @@ a megadott X/Y távolság használatával TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Segéd csúcs beszúrása egy nézetbe @@ -8133,7 +8179,7 @@ a megadott X/Y távolság használatával TechDraw_FaceCenterLine - + Adds a Centerline to Faces Egy középvonal hozzáadása a felületekhez @@ -8149,7 +8195,7 @@ a megadott X/Y távolság használatával TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Segédpontokat illeszt be a kiválasztott élek középpontjába @@ -8157,7 +8203,7 @@ a megadott X/Y távolság használatával TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Segédpontok beillesztése a kijelölt körök kvadránshatáraira @@ -8940,12 +8986,12 @@ a feladat párbeszédpanel nyitva van. CmdTechDrawCosmeticCircle - + TechDraw MűszakiRajz - + Add Cosmetic Circle Segéd kör hozzáadása diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index 115a65f297..52bf61978c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Tambah Garis tengah antara 2 Garis @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Tambah Garis tengah antara 2 Titik @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Tambahkan Vertis Titik-tengah @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Tambahkan Vertis Kuadran @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Tambah Garis tengah antara 2 Garis @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Tambah Garis tengah antara 2 Titik @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Tambahkan Garis Kosmetik Melalui 2 Titik @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Masukkan Anotasi @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Masukkan Garis Tengah - + Add Centerline to Faces Add Centerline to Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Hapus Obyek Kosmetik @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Tambahkan Vertex Kosmetik @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Masukkan Vertex Kosmetik - + Add Cosmetic Vertex Tambahkan Vertex Kosmetik @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Ubah Tampilan Garis - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Add Centerline to Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Tambahkan Vertis Titik-tengah @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Tambahkan Vertis Kuadran @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Masukkan Anotasi Rich Text @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Tampilkan/Sembuyikan Tepi Tak Terlihat @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices Tambahkan Vertis Titik-tengah - + Add Quadrant Vertices Tambahkan Vertis Kuadran - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Pilihan salah @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Pilihan salah - + Select an object first Pilih objek terlebih dahulu - + Too many objects selected Terlalu banyak objek yang dipilih - + Create a page first. Buat halaman terlebih dahulu. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No View of a Part in selection. @@ -2906,8 +2906,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Seleksi yang salah @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Task In Progress - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Task In Progress + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Tak ada yang dipilih - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Apakah yakin ingin melanjutkan? @@ -3459,9 +3469,9 @@ Rich text creator + - Rich text editor Rich text editor @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Edit %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Metode - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. View ini tidak dapat dihapus karena beberapa view yang terhubung akan rusak. - + + + + - - - - - + + Object dependencies Objek dependensi @@ -7404,6 +7412,8 @@ You can pick further points to get line segments. + + Top Puncak @@ -7414,6 +7424,8 @@ You can pick further points to get line segments. + + Left Kiri @@ -7424,11 +7436,14 @@ You can pick further points to get line segments. + + Right Kanan + Rear Belakang @@ -7439,6 +7454,8 @@ You can pick further points to get line segments. + + Bottom Bawah @@ -7489,6 +7506,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Depan + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8093,7 +8139,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8101,7 +8147,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8117,7 +8163,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8138,7 +8184,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8154,7 +8200,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8162,7 +8208,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8945,12 +8991,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index f83e050454..779227f2f2 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Linea centrale a 2 punti @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Vertice nel punto mediano @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Vertici quadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Linea centrale a 2 linee @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Linea centrale a 2 punti @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Linea attraverso 2 punti @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Annotazione @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Inserisci linea centrale - + Add Centerline to Faces Linea a centro faccia @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Rimuovi oggetto cosmetico @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Vertice cosmetico @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Inserisce un Vertice Cosmetico - + Add Cosmetic Vertex Vertice cosmetico @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Aspetto delle linee - + Change Appearance of selected Lines Cambia l'aspetto delle linee selezionate @@ -1397,12 +1397,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Linea a centro faccia @@ -1504,12 +1504,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Linea guida @@ -1543,12 +1543,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Vertice nel punto mediano @@ -1636,12 +1636,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Vertici quadrante @@ -1675,12 +1675,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Blocco di testo @@ -1724,12 +1724,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/nascondi i bordi invisibili @@ -1840,17 +1840,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Crea un simbolo di finitura superficiale - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Seleziona una vista<br> - clicca questo pulsante<br> - seleziona gli attributi del simbolo di finitura superficiale nel pannello aperto @@ -1934,12 +1934,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Informazioni di saldatura @@ -1998,23 +1998,23 @@ Crea vista foglio di calcolo - + Save page to dxf Salva pagina su dxf - + Add Midpoint Vertices Vertice nel punto mediano - + Add Quadrant Vertices Vertici quadrante - + Create Annotation Crea annotazione @@ -2060,7 +2060,7 @@ Trascina quota - + Create Balloon Crea pallinatura @@ -2075,8 +2075,8 @@ Crea linea di mezzeria - + Create Cosmetic Line Crea linea cosmetica @@ -2417,7 +2417,7 @@ Personalizza Formato - + Surface Finish Symbols Simboli di finitura superficiale @@ -2688,16 +2688,6 @@ QObject - - - - - - - - - - @@ -2715,6 +2705,16 @@ + + + + + + + + + + Wrong selection Selezione errata @@ -2746,9 +2746,10 @@ Nessun oggetto di profilo trovato nella selezione - - - + + + + @@ -2760,34 +2761,34 @@ - - - - + + + Incorrect selection Selezione non corretta - + Select an object first Prima selezionare un oggetto - + Too many objects selected Troppi oggetti selezionati - + Create a page first. Prima creare una pagina. + @@ -2796,7 +2797,6 @@ - No View of a Part in selection. Nessuna vista di una Parte nella selezione. @@ -2908,8 +2908,6 @@ Il bordo selezionato è una BSpline. Il raggio sarà approssimativo. Continuare? - - @@ -2929,10 +2927,12 @@ + + + - Incorrect Selection Selezione non corretta @@ -3060,56 +3060,9 @@ Selezionare 2 oggetti punti e 1 vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Attività in corso - - @@ -3126,6 +3079,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Attività in corso + + + + + + + + + + + + + + + + + + + + + @@ -3136,11 +3139,6 @@ - - - - - @@ -3148,190 +3146,202 @@ - - - + + + + + Close active task dialog and try again. Chiudere la finestra di dialogo attiva e riprovare. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Selezione sbagliata - + Can not attach leader. No base View selected. Impossibile agganciare la guida. Nessuna vista di base selezionata. - - - - + + + + You must select a base View for the line. Selezionare una vista base per la linea. - - + + No DrawViewPart objects in this selection Nessun oggetto DrawViewPart in questa selezione - - + + No base View in Selection. Nessuna Vista di base nella selezione. - + You must select Faces or an existing CenterLine. Selezionare le facce o una linea centrale esistente. - + No CenterLine in selection. Nessuna linea centrale nella selezione. - - - + + + Selection is not a CenterLine. La selezione non è una linea centrale. - + Selection not understood. Selezione non compresa. - + You must select 2 Vertexes or an existing CenterLine. Selezionare 2 vertici o una linea centrale esistente. - + Need 2 Vertices or 1 CenterLine. Servono 2 vertici o 1 linea centrale. - - + + Selection is empty. La selezione è vuota. - + Not enough points in selection. Non ci sono abbastanza punti nella selezione. - + Selection is not a Cosmetic Line. La selezione non è una linea cosmetica. - + You must select 2 Vertexes. È necessario selezionare 2 vertici. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Seleziona un centro per il cerchio. - - + + Nothing selected Nessuna selezione - + At least 1 object in selection is not a part view Almeno 1 oggetto nella selezione non è una vista parte - + Unknown object type in selection Tipo di oggetto sconosciuto nella selezione - + No View in Selection. Nessuna vista nella selezione. - + You must select a View and/or lines. Selezionare una vista e/o delle linee. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Nessuna vista parte in questa selezione - + Select exactly one Leader line or one Weld symbol. Seleziona solo una linea guida o un simbolo di saldatura. - - + + SurfaceFinishSymbols SimboliFinituraSuperficiale - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Nessuna vista parziale nella selezione - + No %1 in Selection Nessun %1 nella selezione @@ -3425,8 +3435,8 @@ - + Are you sure you want to continue? Sei sicuro di voler continuare? @@ -3461,9 +3471,9 @@ Creatore di testi avanzato RTF + - Rich text editor Editor di testi avanzato @@ -3581,8 +3591,8 @@ Modifica la vista di dettaglio - + Edit %1 Edita %1 @@ -3701,14 +3711,12 @@ Nessun sottoelemento selezionato - Selection is empty La selezione è vuota - No object selected @@ -3750,12 +3758,12 @@ Seleziona 2 Vertici o 1 Bordo - + Please select a Line Group Si prega di selezionare un gruppo di linee - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3776,37 +3784,37 @@ thick: %4 Modifica tratteggio su faccia - + Method Metodo - + Addition Aggiunta - + Average roughness Rugosità media - + Roughness sampling length Lunghezza campionamento rugosità - + Lay symbol Simbolo finitura - + Minimum roughness grade number Grado minimo di rugosità - + Maximum roughness grade number Grado massimo di rugosità @@ -3855,29 +3863,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Non è possibile eliminare questa linea guida perché essa ha un simbolo di saldatura che si romperebbe. - + You cannot delete this view because it has one or more dependent views that would become broken. Non puoi eliminare questa vista perché ha una o più viste dipendenti che diventerebbero orfani. - + + + + - - - - - + + Object dependencies Dipendenze dell'oggetto @@ -7404,6 +7412,8 @@ Si possono scegliere ulteriori punti per ottenere dei segmenti di linea. + + Top Dall'alto @@ -7414,6 +7424,8 @@ Si possono scegliere ulteriori punti per ottenere dei segmenti di linea. + + Left Da sinistra @@ -7424,11 +7436,14 @@ Si possono scegliere ulteriori punti per ottenere dei segmenti di linea. + + Right Da destra + Rear Da dietro @@ -7439,6 +7454,8 @@ Si possono scegliere ulteriori punti per ottenere dei segmenti di linea. + + Bottom Dal basso @@ -7489,6 +7506,35 @@ usando la spaziatura X/Y specificata Vertical space between border of projections Spazio in verticale tra il bordo delle proiezioni + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FronteSottoDestra + + + + + FrontTopRight + FronteSopraDestra + + + + + FrontBottomLeft + FronteSottoSinistra + + + + Front + Di fronte + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ usando la spaziatura X/Y specificata TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Simboli di finitura superficiale @@ -8093,7 +8139,7 @@ usando la spaziatura X/Y specificata TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Aggiunge una linea centrale tra 2 linee @@ -8101,7 +8147,7 @@ usando la spaziatura X/Y specificata TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Aggiunge una linea centrale tra 2 punti @@ -8117,7 +8163,7 @@ usando la spaziatura X/Y specificata TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserisce un vertice cosmetico in una vista @@ -8138,7 +8184,7 @@ usando la spaziatura X/Y specificata TechDraw_FaceCenterLine - + Adds a Centerline to Faces Linea a centro faccia @@ -8154,7 +8200,7 @@ usando la spaziatura X/Y specificata TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserisce vertici cosmetici al centro dei bordi selezionati @@ -8162,7 +8208,7 @@ usando la spaziatura X/Y specificata TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserisce vertici cosmetici nei punti quadranti dei cerchi selezionati @@ -8945,12 +8991,12 @@ c'è una finestra di dialogo per le attività aperte. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Aggiungi Cerchio Cosmetico diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 2cd73a2564..9fea9f32df 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 2点間に中心線を追加 @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices 中点を追加 @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices 四分点を追加 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 2直線間に中心線を追加 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 2点間に中心線を追加 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points 2点を通過する表示用の線を追加 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 注釈を挿入 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line 中心線を挿入 - + Add Centerline to Faces 面に中心線を追加 @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object 表示用オブジェクトを削除 @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex 表示用の頂点を追加 @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex 表示用の頂点を挿入 - + Add Cosmetic Vertex 表示用の頂点を追加 @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines 線の表示を変更 - + Change Appearance of selected Lines 選択した線の表示を変更 @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces 面に中心線を追加 @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View ビューに引き出し線を追加 @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 中点を追加 @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 四分点を追加 @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation リッチテキスト注釈を挿入 @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges 見えないエッジの表示/非表示 @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol 表面仕上げ記号を作成 - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel ビューを選択<br> - このボタンをクリック<br> - 開いたパネルで表面仕上げ記号を選択 @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline 溶接情報を引き出し線に追加 @@ -1996,23 +1996,23 @@ スプレッドシートビューを作成 - + Save page to dxf ページをDXFに保存 - + Add Midpoint Vertices 中点を追加 - + Add Quadrant Vertices 四分点を追加 - + Create Annotation 注釈を作成 @@ -2058,7 +2058,7 @@ 寸法をドラッグ - + Create Balloon 吹き出しを作成 @@ -2073,8 +2073,8 @@ 中心線を作成 - + Create Cosmetic Line 表示用の線を作成 @@ -2415,7 +2415,7 @@ フォーマットをカスタマイズ - + Surface Finish Symbols 表面仕上げ記号 @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection 誤った選択 @@ -2744,9 +2744,10 @@ プロファイルオブジェクトが選択されていません。 - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection 誤った選択です。 - + Select an object first 最初にオブジェクトを選択してください - + Too many objects selected 選択されているオブジェクトが多すぎます。 - + Create a page first. 最初にページを作成してください + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. パートのビューが選択されていません。 @@ -2906,8 +2906,6 @@ 選択されたエッジはBスプラインです。半径は概算です。続けますか？ - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection 誤った選択です。 @@ -3058,56 +3058,9 @@ 2つの点オブジェクトと1つのビューを選択 (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - 実行中のタスク - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + 実行中のタスク + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. アクテイブなタスクタイアログを閉じて再度実行してください。 - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection 間違った選択 - + Can not attach leader. No base View selected. 引き出し線をアタッチできません。ベースビューが選択されていません。 - - - - + + + + You must select a base View for the line. 線のためのベースビューを選択する必要があります。 - - + + No DrawViewPart objects in this selection DrawViewPartオブジェクトが選択されていません。 - - + + No base View in Selection. ベースビューが選択されていません。 - + You must select Faces or an existing CenterLine. 面または既存の中心線を選択する必要があります。 - + No CenterLine in selection. 中心線が選択されていません。 - - - + + + Selection is not a CenterLine. 選択されているのは中心線ではありません。 - + Selection not understood. 選択範囲が理解できません - + You must select 2 Vertexes or an existing CenterLine. 2頂点または既存の中心線を選択する必要があります。 - + Need 2 Vertices or 1 CenterLine. 2頂点または1本の中心線が必要です。 - - + + Selection is empty. 選択がされていません。 - + Not enough points in selection. 選択点が足りません。 - + Selection is not a Cosmetic Line. 選択されているのは表示用の線ではありません。 - + You must select 2 Vertexes. 2頂点を選択してください。 - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected 何も選択されていません - + At least 1 object in selection is not a part view 選択されているオブジェクトの少なくとも1つがパートビューではありません - + Unknown object type in selection 選択されているのは不明なオブジェクトタイプです - + No View in Selection. 選択範囲にビューがありません。 - + You must select a View and/or lines. ビューおよび/または行を選択する必要があります。 - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection パートビューが選択されていません - + Select exactly one Leader line or one Weld symbol. 引き出し線または溶接シンボルを一つだけ選択して下さい。 - - + + SurfaceFinishSymbols 表面仕上げ記号 - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection パートビューが選択されていません - + No %1 in Selection %1 が選択されていません。 @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? 本当に続行しますか？ @@ -3459,9 +3469,9 @@ リッチテキストクリエイター + - Rich text editor リッチテキストエディタ @@ -3579,8 +3589,8 @@ 詳細ビューを編集 - + Edit %1 %1を編集 @@ -3699,14 +3709,12 @@ サブ要素が選択されていません。 - Selection is empty 選択されていません - No object selected @@ -3748,12 +3756,12 @@ 2つの頂点または1本のエッジを選択してください。 - + Please select a Line Group ライングループを選択して下さい。 - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 面のハッチングを編集 - + Method メソッド - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. 壊れてしまう溶接記号があるため、この引き出し線を削除することはできません。 - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies オブジェクトの依存関係 @@ -7392,6 +7400,8 @@ You can pick further points to get line segments. + + Top 上面図 @@ -7402,6 +7412,8 @@ You can pick further points to get line segments. + + Left 左面図 @@ -7412,11 +7424,14 @@ You can pick further points to get line segments. + + Right 右面図 + Rear 背面図 @@ -7427,6 +7442,8 @@ You can pick further points to get line segments. + + Bottom 底面 @@ -7476,6 +7493,35 @@ using the given X/Y Spacing Vertical space between border of projections 投影境界間の垂直方向の間隔 + + + + FrontTopLeft + 前面 左上 + + + + + FrontBottomRight + 前面 右下 + + + + + FrontTopRight + 前面 右上 + + + + + FrontBottomLeft + 前面 左下 + + + + Front + 正面図 + TechDrawGui::TaskProjection @@ -7886,7 +7932,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols 表面仕上げ記号 @@ -8080,7 +8126,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 2直線間に中心線を追加 @@ -8088,7 +8134,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 2点間に中心線を追加 @@ -8104,7 +8150,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View ビューに表示用の頂点を挿入 @@ -8125,7 +8171,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces 面に中心線を追加 @@ -8141,7 +8187,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges エッジの中点位置に表示用の頂点を挿入 @@ -8149,7 +8195,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles 選択されている円の四分点位置に、表示用の頂点を挿入 @@ -8931,12 +8977,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle 表示用の円を追加 diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index db60f21ebc..06f1689188 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines ორ ხაზს შუა ცენტრის ხაზის გავლება @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points ორ წერტილს შორის ცენტრის ხაზის დამატება @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices შუაწერტილის წვეროების დამატება @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices კუთხეევში წვეროების დამატება @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw ტექნიკური ნახაზი - + Add Centerline between 2 Lines ორ ხაზს შუა ცენტრის ხაზის გავლება @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw ტექნიკური ნახაზი - + Add Centerline between 2 Points ორ წერტილს შორის ცენტრის ხაზის დამატება @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw ტექნიკური ნახაზი - + Add Cosmetic Line Through 2 Points კოსმეტიკური ხაზის ორ წერტილს შუა გავლება @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw ტექნიკური ნახაზი - + Insert Annotation შენიშვნის დამატება @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw ტექნიკური ნახაზი - + Insert Center Line ღერძის ხაზის გავლება - + Add Centerline to Faces ზედაპირებისთვის ღერძული ხაზის დამატება @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw ტექნიკური ნახაზი - + Remove Cosmetic Object დამხმარე ობიექტის წაშლა @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw ტექნიკური ნახაზი - + Add Cosmetic Vertex დამხმარე წვეროს დამატება @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw ტექნიკური ნახაზი - + Insert Cosmetic Vertex დამხმარე წვეროს ჩასმა - + Add Cosmetic Vertex დამხმარე წვეროს დამატება @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw ტექნიკური ნახაზი - + Change Appearance of Lines ხაზების გარეგნული სახის შეცვლა - + Change Appearance of selected Lines მონიშნული ხაზების გარეგნული სახის შეცვლა @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw ტექნიკური ნახაზი - + Add Centerline to Faces ზედაპირებისთვის ღერძული ხაზის დამატება @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw ტექნიკური ნახაზი - + Add Leaderline to View ხედზე გატანადი ხაზის დამატება @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw ტექნიკური ნახაზი - + Add Midpoint Vertices შუაწერტილის წვეროების დამატება @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw ტექნიკური ნახაზი - + Add Quadrant Vertices კუთხეებში წვეროების დამატება @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw ტექნიკური ნახაზი - + Insert Rich Text Annotation ფორმატირებული ანოტაციის დამატება @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw ტექნიკური ნახაზი - + Show/Hide Invisible Edges უხილავი წიბოების ჩვენების ჩართ/გამორთ @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw ტექნიკური ნახაზი - + Create a Surface Finish Symbol ზედაპირის ფინიშის სიმბოლოს შექმნა - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel აირჩიეტ ხედი<br> -დააწკაპუნეთ ამ ღილაკზე<br> -გახსნილ პანელში ზედაპირის დასრულების სიმბოლოს ატრიბუტები აირჩიეთ @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw ტექნიკური ნახაზი - + Add Welding Information to Leaderline გატანად ხაზისთვის შედუღების ინფორმაციის დამატება @@ -1996,23 +1996,23 @@ ელცხრილის შექმნა - + Save page to dxf გვერდის DXF-ში შენახვა - + Add Midpoint Vertices შუაწერტილის წვეროების დამატება - + Add Quadrant Vertices კუთხეებში წვეროების დამატება - + Create Annotation ანოტაციის შექმნა @@ -2058,7 +2058,7 @@ ზომის გადათრევა - + Create Balloon სქოლიოს შექმნა @@ -2073,8 +2073,8 @@ ცენტრალურ ხაზის შექმნა - + Create Cosmetic Line დამხმარე ხაზის შექმნა @@ -2415,7 +2415,7 @@ ფორმატის მორგება - + Surface Finish Symbols ზედაპირის დასრულების სიმბოლოები @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection არასწორი მონიშნული @@ -2744,9 +2744,10 @@ მონიშნულში პროფილის ობექტი ვერ ვიპოვე - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection არასწორი არჩევანი - + Select an object first ჯერ აირჩიეთ ობიექტი - + Too many objects selected მონიშნულია მეტისმეტად ბევრი ობიექტი - + Create a page first. ჯერ შექმენით გვერდი. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. მონიშნულში არ არსებობს ნაწილის ხედი. @@ -2906,8 +2906,6 @@ მონიშნული წიბო B-სპლაინს წარმოადგენს. რადიუსი მხოლოდ დაახლოებითი იქნება. გავაგრძელო? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection არასწორი არჩევანი @@ -3058,56 +3058,9 @@ არჩიეთ 2 წერტილოვანი ობიექტი და 1 ხედი. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - მიმდინარეობს ამოცანის შესრულება - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + მიმდინარეობს ამოცანის შესრულება + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. დახურეთ აქტიური ამოცანის ფანჯარა და თავიდან სცადეთ. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection არასწორი არჩევანი - + Can not attach leader. No base View selected. გატანის მიბმის შეცდომა. საბაზისო ხედი არაა არჩეული. - - - - + + + + You must select a base View for the line. უნდა აირჩიოთ ხაზის საბაზისო ხედი. - - + + No DrawViewPart objects in this selection ამ მონიშნულში DrawViewPart ტიპის ობიექტები არაა - - + + No base View in Selection. მონიშნული საბაზისო ხედი არაა. - + You must select Faces or an existing CenterLine. უნდა მონიშნოთ ზედაპირები ან არსებული ცენტრის ხაზები. - + No CenterLine in selection. მონიშნულში ცენტრის ხაზები არაა. - - - + + + Selection is not a CenterLine. მონიშნული ცენტრის ხაზი არაა. - + Selection not understood. გაუგებარი მონიშვნა. - + You must select 2 Vertexes or an existing CenterLine. უნდა მონიშნოთ 2 წვერო ან არსებული ცენტრის ხაზები. - + Need 2 Vertices or 1 CenterLine. საჭიროა ორი წვერო ან ერთი ცენტრი ხაზი. - - + + Selection is empty. მონიშნული ცარიელია. - + Not enough points in selection. მონიშნულში არასაკმარისი წერტილებია. - + Selection is not a Cosmetic Line. მონიშნული არ წარმოადგენს კოსმეტიკურ ხაზს. - + You must select 2 Vertexes. უნდა მონიშნოთ ორი წვერო. - + You must select a base View for the circle. უნდა აირჩიოთ წრეწირის საბაზისო ხედი. - + Please select a center for the circle. აირჩიეთ ცენტრი წრეწირისთვის. - - + + Nothing selected არაფერია არჩეული - + At least 1 object in selection is not a part view მონიშნულში მინიმუმ 1 ობიექტი ნაწილის ხედს არ წარმოადგენს - + Unknown object type in selection მონიშნულში ობიექტის უცნობი ტიპია - + No View in Selection. მონიშნულში ხედი არ არსებობს. - + You must select a View and/or lines. უნდა აირჩიოთ ხედი და/ან ხაზები. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. მონიშნულ დამხმარე წრეწირი ან წრეწირის დამხმარე რკალი არაა. - + No Part Views in this selection ამ მონიშნულში არ არსებობს ნაწილის ხედები - + Select exactly one Leader line or one Weld symbol. აირჩიეთ ზუსტად ერთი გატანადი ხაზი ან ერთი შედუღების ნიშანი. - - + + SurfaceFinishSymbols ზედაპირისდასრულებისსიმბოლოები - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection მონიშნულში ნაწილის ხედი არ არსებობს - + No %1 in Selection მონიშნულში %1 არ არსებობს @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? დარწმუნებული ბრძანდებით, რომ გნებავთ გააგრძელოთ? @@ -3459,9 +3469,9 @@ ფორმატირებული ტექსტის შემქმნელი + - Rich text editor ტექსტის ფორმატირების რედაქტორი @@ -3579,8 +3589,8 @@ ნაწილის ხედის შეცვლა - + Edit %1 %1-ის ჩასწორება @@ -3699,14 +3709,12 @@ ქვეელემენტები არჩეული არაა - Selection is empty მონიშნული ცარიელია - No object selected @@ -3748,12 +3756,12 @@ აირჩიეთ 2 წვერო ან 1 წიბო - + Please select a Line Group აირჩიეთ ხაზების ჯგუფი - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 ზედაპირის დაშტრიხვის ჩასწორება - + Method მეთოდი - + Addition დამატება - + Average roughness საშუალო სიუხეშე - + Roughness sampling length სიუხეშის სემპლინგის სიგრძე - + Lay symbol გრეხის სიმბოლო - + Minimum roughness grade number მინიმალური სიმქსის დონის ნომერი - + Maximum roughness grade number მაქსიმალური სიმქსის დონის ნომერი @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. თქვენ არ შეგიძლიათ ამ გატანადი ხაზის წაშლა იმიტომ, რომ მას აქვს შედუღების ნიშანი, რომელიც გაფუჭდება. - + You cannot delete this view because it has one or more dependent views that would become broken. თქვენ არ შეგიძლიათ ამ ხედის წაშლა იმიტომ, რომ მას გააჩნია ერთი ან მეტი დამოკიდებული ხედი, რომელიც გაფუჭდებოდა. - + + + + - - - - - + + Object dependencies ობიექტის დამოკიდებულებები @@ -7402,6 +7410,8 @@ You can pick further points to get line segments. + + Top თავზე @@ -7412,6 +7422,8 @@ You can pick further points to get line segments. + + Left მარცხენა @@ -7422,11 +7434,14 @@ You can pick further points to get line segments. + + Right მარჯვენა + Rear უკანა @@ -7437,6 +7452,8 @@ You can pick further points to get line segments. + + Bottom ქვემოთ @@ -7487,6 +7504,35 @@ using the given X/Y Spacing Vertical space between border of projections ვერტიკალური სივრცე პროექციების საზღვრებს შორის + + + + FrontTopLeft + წინაზედამარცხენა + + + + + FrontBottomRight + წინაქვედამარჯვენა + + + + + FrontTopRight + წინაზედამარჯვენა + + + + + FrontBottomLeft + წინაქვედამარცხენა + + + + Front + წინ + TechDrawGui::TaskProjection @@ -7897,7 +7943,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols ზედაპირის დასრულების სიმბოლოები @@ -8091,7 +8137,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines ორ ხაზს შუა ცენტრის ხაზის გავლება @@ -8099,7 +8145,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points ორ წერტილს შორის ცენტრის ხაზის დამატება @@ -8115,7 +8161,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View ხედში კოსმეტიკური წვეროს ჩასმა @@ -8136,7 +8182,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces ზედაპირებზე ცენტრის ხაზების დამატება @@ -8152,7 +8198,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges მონიშნული წიბოების შუა წერტილებში კოსმეტიკური წვეროების ჩასმა @@ -8160,7 +8206,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles მონიშნული წრეწირების მაქსიმალურად დაშორებულ წერტილებში დამხმარე წვეროების ჩასმა @@ -8943,12 +8989,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw ტექნიკური ნახაზი - + Add Cosmetic Circle კოსმეტიკური წრეწირის დამატება diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index bbc9cf69e3..6457d74ad6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 두 선 사이에 중심선 추가 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 두 점 사이에 중심선 추가 @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices 중간점 정점 추가 @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices 사분원 정점 추가 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines 두 선 사이에 중심선 추가 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points 두 점 사이에 중심선 추가 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points 두 점을 지나는 꾸밈선 추가 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 주석 삽입 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line 중심 선 삽입 - + Add Centerline to Faces 면에 중심선 추가 @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object 꾸밈 객체 제거 @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex 꾸밈 꼭짓점 추가 @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex 꾸밈 꼭짓점 삽입 - + Add Cosmetic Vertex 꾸밈 꼭짓점 추가 @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines 선 외형 변경 - + Change Appearance of selected Lines 선택한 선의 외형 변경 @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces 면에 중심선 추가 @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 중간점 정점 추가 @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 사분원 정점 추가 @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices 중간점 정점 추가 - + Add Quadrant Vertices 사분원 정점 추가 - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line 장식 선 만들기 @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection 잘못 된 선택 @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Incorrect selection - + Select an object first Select an object first - + Too many objects selected Too many objects selected - + Create a page first. 먼저 페이지를 작성합니다. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No View of a Part in selection. @@ -2906,8 +2906,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Incorrect Selection @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Task In Progress - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Task In Progress + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Are you sure you want to continue? @@ -3459,9 +3469,9 @@ Rich text creator + - Rich text editor Rich text editor @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Edit %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Method - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies 객체 종속성 @@ -7405,6 +7413,8 @@ You can pick further points to get line segments. + + Top 평면 @@ -7415,6 +7425,8 @@ You can pick further points to get line segments. + + Left 좌측면 @@ -7425,11 +7437,14 @@ You can pick further points to get line segments. + + Right 우측면 + Rear 배면 @@ -7440,6 +7455,8 @@ You can pick further points to get line segments. + + Bottom 저면 @@ -7490,6 +7507,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + 정면 + TechDrawGui::TaskProjection @@ -7900,7 +7946,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8094,7 +8140,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8102,7 +8148,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8118,7 +8164,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View 뷰 안에 장식 정점 삽입 @@ -8139,7 +8185,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8155,7 +8201,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8163,7 +8209,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8946,12 +8992,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle 장식 원 추가 diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 54a9a5a5ad..bf3334a844 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Voeg middelpunten toe @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Voeg kwadrantpunten toe @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Voeg een middenlijn tussen 2 lijnen toe @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Voeg een middenlijn tussen 2 punten toe @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Voeg symbolische Lijn Door 2 Punten @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Voeg een annotatie in @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Voeg een middenlijn in - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Verwijder cosmetisch object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Voeg een cosmetisch eindpunt in - + Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Verander uiterlijk van de lijnen - + Change Appearance of selected Lines Wijzig uiterlijk van geselecteerde lijnen @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Voeg een middenlijn toe aan vlakken @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Voeg een leiderslijn aan de weergave toe @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Voeg middelpunten toe @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Voeg kwadrantpunten toe @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Voeg een opgemaakte tekstannotatie @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Onzichtbare randen weergeven/verbergen @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Voeg lasinformatie toe aan leiderslijn @@ -1996,23 +1996,23 @@ Rekenbladweergave maken - + Save page to dxf Pagina in dxf opslaan - + Add Midpoint Vertices Voeg middelpunten toe - + Add Quadrant Vertices Voeg kwadrantpunten toe - + Create Annotation Aantekening maken @@ -2058,7 +2058,7 @@ Dimensie slepen - + Create Balloon Ballon maken @@ -2073,8 +2073,8 @@ Maak een middenlijn - + Create Cosmetic Line Cosmetische lijn maken @@ -2415,7 +2415,7 @@ Formaat aanpassen - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Verkeerde selectie @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Onjuiste selectie - + Select an object first Selecteer eerst een object - + Too many objects selected Te veel objecten geselecteerd - + Create a page first. Maak eerst een pagina. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Geen aanzicht van een onderdeel in de selectie. @@ -2906,8 +2906,6 @@ Geselecteerde rand is een BSpline. Straal zal approximatief zijn. Doorgaan? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Onjuiste Selectie @@ -3058,56 +3058,9 @@ Selecteer 2 punten en 1 aanzicht. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Taak in uitvoering - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Taak in uitvoering + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Sluit het actieve taakvenster en probeer opnieuw. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Verkeerde selectie - + Can not attach leader. No base View selected. Kan de leider niet bijvoegen. Geen basisweergave geselecteerd. - - - - + + + + You must select a base View for the line. U moet een basisweergave voor deze lijn selecteren. - - + + No DrawViewPart objects in this selection Geen DrawViewPart-objecten in deze selectie - - + + No base View in Selection. Geen basisweergave in de selectie. - + You must select Faces or an existing CenterLine. U moet vlakken of een bestaand middenlijn selecteren. - + No CenterLine in selection. Geen middenlijn in selectie. - - - + + + Selection is not a CenterLine. Selectie is geen middenlijn. - + Selection not understood. Selectie niet begrepen. - + You must select 2 Vertexes or an existing CenterLine. U moet 2 eindpunten of een bestaande middenlijn selecteren. - + Need 2 Vertices or 1 CenterLine. Vereist 2 eindpunten of 1 middenlijn. - - + + Selection is empty. Selectie is leeg. - + Not enough points in selection. Niet genoeg punten in selectie. - + Selection is not a Cosmetic Line. Selectie is geen cosmetische lijn. - + You must select 2 Vertexes. U moet 2 hoekpunten selecteren. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Niets geselecteerd - + At least 1 object in selection is not a part view Tenminste 1 object in de selectie is geen deelweergave - + Unknown object type in selection Onbekend objecttype in de selectie - + No View in Selection. Geen weergave in de selectie. - + You must select a View and/or lines. U moet een aanzicht en/of lijnen selecteren. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Geen deelweergaves in deze selectie - + Select exactly one Leader line or one Weld symbol. Selecteer precies een leiderslijn of een lassymbool. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection Geen %1 in selectie @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Weet u zeker dat u wilt doorgaan? @@ -3459,9 +3469,9 @@ Opgemaakte tekst-maker + - Rich text editor Opgemaakte tekst-editor @@ -3579,8 +3589,8 @@ Bewerk detailweergave - + Edit %1 Bewerken %1 @@ -3699,14 +3709,12 @@ Geen subelementen geselecteerd - Selection is empty Selectie is leeg - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Methode - + Addition Toevoeging - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. U kunt deze leiderslijn niet verwijderen omdat het een Lassymbool heeft dat kapot zou gaan. - + You cannot delete this view because it has one or more dependent views that would become broken. U kunt deze weergave niet verwijderen omdat deze een of meerdere afhankelijke weergave(s) heeft, die dan beschadigd raken. - + + + + - - - - - + + Object dependencies Object afhankelijkheden @@ -7405,6 +7413,8 @@ Je kan meer punten kiezen om lijnsegmenten te krijgen. + + Top Boven @@ -7415,6 +7425,8 @@ Je kan meer punten kiezen om lijnsegmenten te krijgen. + + Left Links @@ -7425,11 +7437,14 @@ Je kan meer punten kiezen om lijnsegmenten te krijgen. + + Right Rechts + Rear Achter @@ -7440,6 +7455,8 @@ Je kan meer punten kiezen om lijnsegmenten te krijgen. + + Bottom Onder @@ -7490,6 +7507,35 @@ met behulp van de gegeven X/Y afstand Vertical space between border of projections Verticale afstand tussen de omtrek van projecties + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Voorkant + TechDrawGui::TaskProjection @@ -7900,7 +7946,7 @@ met behulp van de gegeven X/Y afstand TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8094,7 +8140,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Voegt een middenlijn tussen 2 lijnen toe @@ -8102,7 +8148,7 @@ met behulp van de gegeven X/Y afstand TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Voegt een middenlijn tussen 2 punten toe @@ -8118,7 +8164,7 @@ met behulp van de gegeven X/Y afstand TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Voegt een cosmetisch eindpunt in een weergave in @@ -8139,7 +8185,7 @@ met behulp van de gegeven X/Y afstand TechDraw_FaceCenterLine - + Adds a Centerline to Faces Voegt een middenlijn toe aan vlakken @@ -8155,7 +8201,7 @@ met behulp van de gegeven X/Y afstand TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Voegt cosmetische eindpunten toe aan het midden van de geselecteerde randen @@ -8163,7 +8209,7 @@ met behulp van de gegeven X/Y afstand TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Voegt cosmetische eindpunten toe aan de kwadrantpunten van geselecteerde cirkels @@ -8946,12 +8992,12 @@ een open taak dialoogvenster is. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Cosmetische cirkel toevoegen diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index c3546209bb..78e85fbafb 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj oś pomiędzy dwiema liniami @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj oś pomiędzy dwoma punktami @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodaj wierzchołki kwadrantu @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline between 2 Lines Dodaj oś pomiędzy dwiema liniami @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline between 2 Points Dodaj oś pomiędzy dwoma punktami @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Rysunek Techniczny - + Add Cosmetic Line Through 2 Points Dodaj linię kosmetyczną wytyczoną przez dwa punkty @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Rysunek Techniczny - + Insert Annotation Wstaw adnotację @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Rysunek Techniczny - + Insert Center Line Dodaj linię środkową - + Add Centerline to Faces Dodaj oś ściany @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Rysunek Techniczny - + Remove Cosmetic Object Usuń geometrie pomocnicze @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Rysunek Techniczny - + Add Cosmetic Vertex Dodaj wierzchołek kosmetyczny @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Rysunek Techniczny - + Insert Cosmetic Vertex Wstaw wierzchołek kosmetyczny - + Add Cosmetic Vertex Dodaj wierzchołek kosmetyczny @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Rysunek Techniczny - + Change Appearance of Lines Zmień wygląd linii - + Change Appearance of selected Lines Zmień wygląd wybranych linii @@ -1450,12 +1450,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Rysunek Techniczny - + Add Centerline to Faces Dodaj oś ściany @@ -1557,12 +1557,12 @@ CmdTechDrawLeaderLine - + TechDraw Rysunek Techniczny - + Add Leaderline to View Dodaj linię odniesienia do widoku @@ -1596,12 +1596,12 @@ CmdTechDrawMidpoints - + TechDraw Rysunek Techniczny - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego @@ -1689,12 +1689,12 @@ CmdTechDrawQuadrants - + TechDraw Rysunek Techniczny - + Add Quadrant Vertices Dodaj wierzchołki kwadrantu @@ -1728,12 +1728,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Rysunek Techniczny - + Insert Rich Text Annotation Wstaw adnotację w postaci tekstu sformatowanego @@ -1777,12 +1777,12 @@ CmdTechDrawShowAll - + TechDraw Rysunek Techniczny - + Show/Hide Invisible Edges Pokaż / ukryj niewidoczne krawędzie @@ -1893,17 +1893,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Rysunek Techniczny - + Create a Surface Finish Symbol Dodaj symbol wykończenia powierzchni - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Wybierz widok<br> - kliknij ten przycisk<br> - wybierz atrybuty symbolu wykończenia powierzchni w otwartym panelu @@ -1987,12 +1987,12 @@ CmdTechDrawWeldSymbol - + TechDraw Rysunek Techniczny - + Add Welding Information to Leaderline Dodaj informacje spawalnicze do linii odniesienia @@ -2051,23 +2051,23 @@ Utwórz widok arkusza kalkulacyjnego - + Save page to dxf Zapisz stronę do pliku dxf - + Add Midpoint Vertices Dodaj wierzchołki punktu środkowego - + Add Quadrant Vertices Dodaj wierzchołki kwadrantu - + Create Annotation Utwórz adnotację @@ -2113,7 +2113,7 @@ Przeciągnij wymiar - + Create Balloon Utwórz balonik dymka @@ -2128,8 +2128,8 @@ Utwórz linię środkową - + Create Cosmetic Line Utwórz linię kosmetyczną @@ -2470,7 +2470,7 @@ Dostosuj format - + Surface Finish Symbols Symbole wykończenia powierzchni @@ -2741,16 +2741,6 @@ QObject - - - - - - - - - - @@ -2768,6 +2758,16 @@ + + + + + + + + + + Wrong selection Nieprawidłowy wybór @@ -2799,9 +2799,10 @@ Nie znaleziono obiektu profilu w zaznaczeniu - - - + + + + @@ -2813,34 +2814,34 @@ - - - - + + + Incorrect selection Nieprawidłowy wybór - + Select an object first Najpierw wybierz obiekt - + Too many objects selected Wybrano zbyt wiele obiektów - + Create a page first. Najpierw stwórz stronę. + @@ -2849,7 +2850,6 @@ - No View of a Part in selection. Brak widoku części w wyborze. @@ -2961,8 +2961,6 @@ Wybrana krawędź to krzywa złożona. Promień będzie przybliżony. Kontynuować? - - @@ -2982,10 +2980,12 @@ + + + - Incorrect Selection Niepoprawny wybór @@ -3113,56 +3113,9 @@ Wybierz dwa obiekty punktów i jeden widok. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Zadanie w toku - - @@ -3179,6 +3132,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Zadanie w toku + + + + + + + + + + + + + + + + + + + + + @@ -3189,11 +3192,6 @@ - - - - - @@ -3201,190 +3199,202 @@ - - - + + + + + Close active task dialog and try again. Zamknij okno aktywnego zadania i spróbuj ponownie. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Nieprawidłowy wybór - + Can not attach leader. No base View selected. Nie można dołączyć linii odniesienia. Nie wybrano podstawowego widoku. - - - - + + + + You must select a base View for the line. Musisz wybrać widok dla odniesienia linii. - - + + No DrawViewPart objects in this selection Brak obiektów DrawViewPart w tym zaznaczeniu - - + + No base View in Selection. Brak bazowego widoku w zaznaczeniu. - + You must select Faces or an existing CenterLine. Musisz wybrać ściany lub istniejącą linię centralną. - + No CenterLine in selection. Brak linii centralnej w wyborze. - - - + + + Selection is not a CenterLine. Wybrany element nie jest linią środkową. - + Selection not understood. Zaznaczenie niezrozumiałe. - + You must select 2 Vertexes or an existing CenterLine. Musisz wybrać 2 wierzchołki lub istniejącą linię centralną. - + Need 2 Vertices or 1 CenterLine. Wymagane są dwa wierzchołki lub linia środkowa. - - + + Selection is empty. Obszar zaznaczenia nie zawiera obiektów. - + Not enough points in selection. Wybrano za małą ilość punktów. - + Selection is not a Cosmetic Line. Wybrany element nie jest Linią Kosmetyczną. - + You must select 2 Vertexes. Musisz wybrać 2 wierzchołki. - + You must select a base View for the circle. Musisz wybrać widok bazowy dla okręgu. - + Please select a center for the circle. Proszę wybrać środek okręgu. - - + + Nothing selected Nic nie wybrano - + At least 1 object in selection is not a part view Co najmniej 1 obiekt w zaznaczeniu nie jest widokiem części - + Unknown object type in selection Nie znany typ obiektu w zaznaczeniu - + No View in Selection. Brak "widoku" w zaznaczeniu. - + You must select a View and/or lines. Musisz wybrać widok i/lub linie. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Wybrana geometria nie jest okręgiem kosmetycznym ani łukiem koła. - + No Part Views in this selection Brak widoków części w tym zaznaczeniu - + Select exactly one Leader line or one Weld symbol. Wybierz dokładnie jedną linię odniesienia lub jeden symbol spawalniczy. - - + + SurfaceFinishSymbols Symbole wykończenia powierzchni - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Brak widoku części w wyborze - + No %1 in Selection Brak %1 w zaznaczeniu @@ -3478,8 +3488,8 @@ - + Are you sure you want to continue? Czy na pewno chcesz kontynuować? @@ -3514,9 +3524,9 @@ Kreator tekstu sformatowanego + - Rich text editor Edytor tekstu sformatowanego @@ -3634,8 +3644,8 @@ Edytuj widok szczegółu - + Edit %1 Edytuj %1 @@ -3754,14 +3764,12 @@ Nie wybrano elementów podrzędnych - Selection is empty Obszar zaznaczenia nie zawiera obiektów - No object selected @@ -3803,12 +3811,12 @@ Wybierz 2 wierzchołki lub 1 krawędź - + Please select a Line Group Wybierz grupę linii - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3829,37 +3837,37 @@ thick: %4 Edytuj kreskowanie ściany - + Method Metoda - + Addition Dodanie - + Average roughness Średnia chropowatość - + Roughness sampling length Długość próbkowania chropowatości - + Lay symbol Symbol kierunkowości - + Minimum roughness grade number Wartość minimalna klasy chropowatości - + Maximum roughness grade number Wartość maksymalna klasy chropowatości @@ -3908,29 +3916,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nie możesz usunąć tej linii odniesienia, ponieważ zawiera symbol spoiny który zostałby uszkodzony. - + You cannot delete this view because it has one or more dependent views that would become broken. Nie można usunąć tego widoku, ponieważ ma on co najmniej jeden obiekt zależny, który zostałby uszkodzony. - + + + + - - - - - + + Object dependencies Zależności obiektu @@ -7462,6 +7470,8 @@ Możesz wybrać kolejne punkty, aby uzyskać odcinki linii. + + Top Od góry @@ -7472,6 +7482,8 @@ Możesz wybrać kolejne punkty, aby uzyskać odcinki linii. + + Left Od lewej @@ -7482,11 +7494,14 @@ Możesz wybrać kolejne punkty, aby uzyskać odcinki linii. + + Right Od prawej + Rear Od tył @@ -7497,6 +7512,8 @@ Możesz wybrać kolejne punkty, aby uzyskać odcinki linii. + + Bottom Od dołu @@ -7547,6 +7564,35 @@ przy użyciu podanego odstępu X/Y Vertical space between border of projections Odstęp pionowy między ramkami wyświetlanych elementów + + + + FrontTopLeft + Przód góra lewo + + + + + FrontBottomRight + Przód dół prawo + + + + + FrontTopRight + Przód góra prawo + + + + + FrontBottomLeft + Przód dół lewo + + + + Front + Od przodu + TechDrawGui::TaskProjection @@ -7957,7 +8003,7 @@ przy użyciu podanego odstępu X/Y TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Symbole wykończenia powierzchni @@ -8151,7 +8197,7 @@ przy użyciu podanego odstępu X/Y TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodaj linię środkową pomiędzy dwoma liniami @@ -8159,7 +8205,7 @@ przy użyciu podanego odstępu X/Y TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodaj linię środkową pomiędzy dwoma punktami @@ -8175,7 +8221,7 @@ przy użyciu podanego odstępu X/Y TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Wstawia kosmetyczny wierzchołek do widoku @@ -8196,7 +8242,7 @@ przy użyciu podanego odstępu X/Y TechDraw_FaceCenterLine - + Adds a Centerline to Faces Dodaje linię środkową do ściany @@ -8212,7 +8258,7 @@ przy użyciu podanego odstępu X/Y TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Wstawia kosmetyczne wierzchołki w punkcie środkowym wybranych krawędzi @@ -8220,7 +8266,7 @@ przy użyciu podanego odstępu X/Y TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Wstawia wierzchołki kosmetyczne w punktach kwadrantu wybranych okręgów @@ -9003,12 +9049,12 @@ jest otwarte okno dialogowe zadania. CmdTechDrawCosmeticCircle - + TechDraw Rysunek Techniczny - + Add Cosmetic Circle Dodaj okrąg kosmetyczny diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index 3c7375104d..1163f0903d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha central aos dois pontos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Adicionar ponto central aos vértices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Adicionar vértices de segundo grau @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Lines Adicionar linha central às duas linhas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline between 2 Points Adicionar linha central aos dois pontos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Line Through 2 Points Adicionar uma linha cosmética passando por 2 pontos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - Desenhos Técnicos - + Insert Annotation Inserir anotação @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Center Line Inserir Linha Central - + Add Centerline to Faces Adicionar linha de centro em Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - Desenhos Técnicos - + Remove Cosmetic Object Remover objeto cosmético @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - Desenhos Técnicos - + Insert Cosmetic Vertex Adicionar vértice cosmético - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - Desenhos Técnicos - + Change Appearance of Lines Alterar Aparência das Linhas - + Change Appearance of selected Lines Alterar a aparência das linhas selecionadas @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Centerline to Faces Adicionar linha de centro em Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - Desenhos Técnicos - + Add Leaderline to View Adicionar linha de chamada a uma Vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - Desenhos Técnicos - + Add Midpoint Vertices Adicionar ponto central aos vértices @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - Desenhos Técnicos - + Add Quadrant Vertices Adicionar vértices de segundo grau @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - Desenhos Técnicos - + Insert Rich Text Annotation Inserir anotação de texto @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - Desenhos Técnicos - + Show/Hide Invisible Edges Mostrar/ocultar arestas invisíveis @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - Desenhos Técnicos - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - Desenhos Técnicos - + Add Welding Information to Leaderline Adicionar informações de solda na linha de anotação @@ -1996,23 +1996,23 @@ Criar vista de planilha - + Save page to dxf Salvar página para dxf - + Add Midpoint Vertices Adicionar ponto central aos vértices - + Add Quadrant Vertices Adicionar vértices de segundo grau - + Create Annotation Criar anotação @@ -2058,7 +2058,7 @@ Arrastar Dimensão - + Create Balloon Criar Balão @@ -2073,8 +2073,8 @@ Criar linha central - + Create Cosmetic Line Criar Linha Cosmética @@ -2415,7 +2415,7 @@ Customizar formato - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Seleção errada @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Seleção incorreta - + Select an object first Selecione um objeto primeiro - + Too many objects selected Demasiados objetos selecionados - + Create a page first. Primeiro, crie uma página. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Nenhuma vista de uma peça na seleção. @@ -2906,8 +2906,6 @@ A aresta selecionada é uma BSpline. O raio será aproximado. Continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Seleção Incorreta @@ -3058,56 +3058,9 @@ Selecionar 2 pontos e 1 vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tarefa em andamento - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tarefa em andamento + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Feche a caixa de diálogo ativa e tente novamente. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Seleção errada - + Can not attach leader. No base View selected. Não é possível anexar linha de anotações. Não há nenhuma vista de base selecionada. - - - - + + + + You must select a base View for the line. Você deve selecionar uma vista de base para a linha. - - + + No DrawViewPart objects in this selection Não há objetos DrawViewPart nesta seleção - - + + No base View in Selection. Nenhuma vista de base na seleção. - + You must select Faces or an existing CenterLine. Você deve selecionar faces ou uma linha de centro. - + No CenterLine in selection. Não há linha central na seleção. - - - + + + Selection is not a CenterLine. A seleção não é uma linha central. - + Selection not understood. Seleção não compreendida. - + You must select 2 Vertexes or an existing CenterLine. Você deve selecionar 2 vértices ou uma linha central existente. - + Need 2 Vertices or 1 CenterLine. Precisa de 2 vértices ou 1 linha central. - - + + Selection is empty. A seleção está vazia. - + Not enough points in selection. Não há pontos suficientes na seleção. - + Selection is not a Cosmetic Line. A seleção não é uma linha cosmética. - + You must select 2 Vertexes. Você deve selecionar 2 vértices. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nada foi selecionado - + At least 1 object in selection is not a part view Pelo menos 1 objeto na seleção não é uma vista de peça - + Unknown object type in selection Tipo de objeto desconhecido na seleção - + No View in Selection. Nenhuma vista na seleção. - + You must select a View and/or lines. Você deve selecionar uma vista e/ou linhas. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Nenhuma vista de peça nesta seleção - + Select exactly one Leader line or one Weld symbol. Selecione exatamente uma linha de anotações ou um símbolo de solda. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3459,9 +3469,9 @@ Criador de texto + - Rich text editor Editor de texto @@ -3579,8 +3589,8 @@ Editar vista de detalhe - + Edit %1 Editar %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty A seleção está vazia - No object selected @@ -3748,12 +3756,12 @@ Selecione 2 vértices ou 1 aresta - + Please select a Line Group Por favor, selecione um Grupo de Linha - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Método - + Addition Adição - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Não é possível excluir esta linha de anotação porque ela tem um símbolo de solda que quebraria. - + You cannot delete this view because it has one or more dependent views that would become broken. Você não pode excluir esta visão porque ela tem uma ou mais visualizações dependentes que se tornariam quebradas. - + + + + - - - - - + + Object dependencies Dependências do objeto @@ -7405,6 +7413,8 @@ Você pode indicar mais pontos para obter segmentos de linha. + + Top Topo @@ -7415,6 +7425,8 @@ Você pode indicar mais pontos para obter segmentos de linha. + + Left Esquerda @@ -7425,11 +7437,14 @@ Você pode indicar mais pontos para obter segmentos de linha. + + Right Direito + Rear Traseira @@ -7440,6 +7455,8 @@ Você pode indicar mais pontos para obter segmentos de linha. + + Bottom De baixo @@ -7490,6 +7507,35 @@ usando o espaçamento X/Y fornecido Vertical space between border of projections Espaço vertical entre a borda das projeções + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Frente + TechDrawGui::TaskProjection @@ -7900,7 +7946,7 @@ usando o espaçamento X/Y fornecido TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8094,7 +8140,7 @@ usando o espaçamento X/Y fornecido TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adicionar linha central entre duas linhas @@ -8102,7 +8148,7 @@ usando o espaçamento X/Y fornecido TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adicionar linha central entre dois pontos @@ -8118,7 +8164,7 @@ usando o espaçamento X/Y fornecido TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insere um vértice cosmético na vista @@ -8139,7 +8185,7 @@ usando o espaçamento X/Y fornecido TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adicionar linha central em faces @@ -8155,7 +8201,7 @@ usando o espaçamento X/Y fornecido TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insere vértices cosméticos no ponto central das arestas selecionadas @@ -8163,7 +8209,7 @@ usando o espaçamento X/Y fornecido TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insere vértices cosméticos nos quadrantes dos círculos selecionados @@ -8946,12 +8992,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - Desenhos Técnicos - + Add Cosmetic Circle Adicionar Círculo Cosmético diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index 631cb960f1..b80d617d52 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Adicionar vértices de ponto médio @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Adicionar vértices do Quadrante @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Lines Adicionar linha de eixo entre 2 linhas @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline between 2 Points Adicionar linha de eixo entre 2 Pontos @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Line Through 2 Points Adicionar Linha Cosmética Através de 2 Pontos @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Annotation Inserir anotação @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Center Line Inserir Linha de Eixo - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw (Desenhos Técnicos) - + Remove Cosmetic Object Remover objeto cosmético @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Cosmetic Vertex Inserir Vértice Cosmético - + Add Cosmetic Vertex Adicionar Vértice Cosmético @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw (Desenhos Técnicos) - + Change Appearance of Lines Alterar Aparência das Linhas - + Change Appearance of selected Lines Alterar a aparência das linhas selecionadas @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Centerline to Faces Adicionar linha de eixo ás Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw (Desenhos Técnicos) - + Add Leaderline to View Adicionar Linha de chamada na Vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw (Desenhos Técnicos) - + Add Midpoint Vertices Adicionar vértices de ponto médio @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw (Desenhos Técnicos) - + Add Quadrant Vertices Adicionar vértices do Quadrante @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw (Desenhos Técnicos) - + Insert Rich Text Annotation Inserir anotação de Rich Text @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw (Desenhos Técnicos) - + Show/Hide Invisible Edges Mostrar/Ocultar arestas invisíveis @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw (Desenhos Técnicos) - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw (Desenhos Técnicos) - + Add Welding Information to Leaderline Adicionar Linha de chamada com Informações de soldadura @@ -1996,23 +1996,23 @@ Criar vista de folha de cálculo - + Save page to dxf Salvar folha para dxf - + Add Midpoint Vertices Adicionar vértices de ponto médio - + Add Quadrant Vertices Adicionar vértices do Quadrante - + Create Annotation Criar anotação @@ -2058,7 +2058,7 @@ Arrastar Dimensão - + Create Balloon Criar Balão @@ -2073,8 +2073,8 @@ Criar LinhadeEixo - + Create Cosmetic Line Criar Linha Cosmética @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Seleção errada @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selecção incorrecta - + Select an object first Selecione um objeto primeiro - + Too many objects selected Demasiados objetos selecionados - + Create a page first. Primeiro, crie uma página. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Nenhuma vista de uma peça na seleção. @@ -2906,8 +2906,6 @@ A aresta selecionada é uma BSpline. O raio será aproximado. Continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Seleção Incorreta @@ -3058,56 +3058,9 @@ Selecione 2 pontos e 1 vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tarefa em execução - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tarefa em execução + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Fechar a caixa de diálogo ativa e tentar novamente. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Seleção errada - + Can not attach leader. No base View selected. Não é possível anexar chamada. Nenhuma vista base selecionada. - - - - + + + + You must select a base View for the line. Deve selecionar uma vista base para a linha. - - + + No DrawViewPart objects in this selection Não há objetos de desenho nesta seleção - - + + No base View in Selection. Nenhuma vista base na seleção. - + You must select Faces or an existing CenterLine. Deve selecionar Faces ou uma linha de eixo. - + No CenterLine in selection. Não há linha de eixo na seleção. - - - + + + Selection is not a CenterLine. A seleção não é uma linha de eixo. - + Selection not understood. Seleção não compreendida. - + You must select 2 Vertexes or an existing CenterLine. Deve selecionar 2 vértices ou uma linha de eixo existente. - + Need 2 Vertices or 1 CenterLine. Precisa de 2 vértices ou 1 linha de eixo. - - + + Selection is empty. A seleção está vazia. - + Not enough points in selection. Não há pontos suficientes na seleção. - + Selection is not a Cosmetic Line. A seleção não é uma linha cosmética. - + You must select 2 Vertexes. Deve selecionar 2 vértices. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nada selecionado - + At least 1 object in selection is not a part view Pelo menos 1 objeto na seleção não é uma vista de peça - + Unknown object type in selection Tipo de objeto desconhecido na seleção - + No View in Selection. Nenhuma vista na seleção. - + You must select a View and/or lines. Deve selecionar uma vista e/ou linhas. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Não há vistas de peças nesta seleção - + Select exactly one Leader line or one Weld symbol. Selecione apenas uma linha de chamada ou um símbolo de soldadura. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3459,9 +3469,9 @@ Criador de Rich text + - Rich text editor Editor de Rich text @@ -3579,8 +3589,8 @@ Editar Vista de Detalhe - + Edit %1 Edite %1 @@ -3699,14 +3709,12 @@ Nenhum sub-elemento selecionado - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Método - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Não é possível excluir esta linha de chamada porque ela tem um símbolo de soldadura que se quebrará. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Dependências do objeto @@ -7404,6 +7412,8 @@ Você pode escolher pontos adicionais para obter segmentos de linha. + + Top Topo @@ -7414,6 +7424,8 @@ Você pode escolher pontos adicionais para obter segmentos de linha. + + Left Esquerda @@ -7424,11 +7436,14 @@ Você pode escolher pontos adicionais para obter segmentos de linha. + + Right Direita + Rear Traseira @@ -7439,6 +7454,8 @@ Você pode escolher pontos adicionais para obter segmentos de linha. + + Bottom De baixo @@ -7489,6 +7506,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Frente + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8093,7 +8139,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8101,7 +8147,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8117,7 +8163,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8138,7 +8184,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8154,7 +8200,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8162,7 +8208,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8945,12 +8991,12 @@ há uma caixa de diálogo aberta. CmdTechDrawCosmeticCircle - + TechDraw TechDraw (Desenhos Técnicos) - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 78dbd0e936..1528dc3e01 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Adaugă axa de simetrie între 2 linii @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Adaugă axa de simetrie între 2 Puncte @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Adaugă punct median @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Adaugă puncte pentru cadrane @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Lines Adaugă axa de simetrie între 2 linii @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Desen tehnic - + Add Centerline between 2 Points Adaugă axa de simetrie între 2 Puncte @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Desen tehnic - + Add Cosmetic Line Through 2 Points Adaugă linie cosmetică prin 2 puncte @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Desen tehnic - + Insert Annotation Inserare adnotare @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Desen tehnic - + Insert Center Line Inserare axa de simetrie - + Add Centerline to Faces Adaugă axa de simetrie la fețe @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Desen tehnic - + Remove Cosmetic Object Remove Cosmetic Object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Desen tehnic - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Desen tehnic - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Desen tehnic - + Change Appearance of Lines Change Appearance of Lines - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Desen tehnic - + Add Centerline to Faces Adaugă axa de simetrie la fețe @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw Desen tehnic - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw Desen tehnic - + Add Midpoint Vertices Adaugă punct median @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw Desen tehnic - + Add Quadrant Vertices Adaugă puncte pentru cadrane @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Desen tehnic - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw Desen tehnic - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Desen tehnic - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw Desen tehnic - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices Adaugă punct median - + Add Quadrant Vertices Adaugă puncte pentru cadrane - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Selecţie greşită @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selectarea incorectă - + Select an object first Selectaţi un obiect mai întâi - + Too many objects selected Prea multe obiecte selectate - + Create a page first. Creați /selectați o pagină mai întâi. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No View of a Part in selection. @@ -2906,8 +2906,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selectarea incorectă @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Task In Progress - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Task In Progress + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Are you sure you want to continue? @@ -3459,9 +3469,9 @@ Rich text creator + - Rich text editor Rich text editor @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Editare %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Metoda - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Dependențe obiect @@ -7404,6 +7412,8 @@ You can pick further points to get line segments. + + Top Partea de sus @@ -7414,6 +7424,8 @@ You can pick further points to get line segments. + + Left Stanga @@ -7424,11 +7436,14 @@ You can pick further points to get line segments. + + Right Dreapta + Rear Din spate @@ -7439,6 +7454,8 @@ You can pick further points to get line segments. + + Bottom Partea de jos @@ -7489,6 +7506,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Din față + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8093,7 +8139,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8101,7 +8147,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8117,7 +8163,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8138,7 +8184,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8154,7 +8200,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8162,7 +8208,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8945,12 +8991,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw Desen tehnic - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 8d1734827d..282d892f63 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Добавить Осевую линию между 2 Линиями @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Добавить Осевую линию между 2 Точками @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Добавить вершины по центрам граней @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Добавить 4-ре вершины по краям окружности @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Lines Добавить Осевую линию между 2 Линиями @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw Технический чертёж - + Add Centerline between 2 Points Добавить Осевую линию между 2 Точками @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw Технический чертёж - + Add Cosmetic Line Through 2 Points Добавить вспомогательную линию между 2-мя точками @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw Технический чертёж - + Insert Annotation Вставить заметку @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw Технический чертёж - + Insert Center Line Добавить осевую линию - + Add Centerline to Faces Добавить Осевую линию к Граням @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw Технический чертёж - + Remove Cosmetic Object Удалить вспомогательный объект @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw Технический чертёж - + Add Cosmetic Vertex Добавить вспомогательную вершину @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw Технический чертёж - + Insert Cosmetic Vertex Вставить вспомогательную вершину - + Add Cosmetic Vertex Добавить вспомогательную вершину @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw Технический чертёж - + Change Appearance of Lines Изменить внешний вид линий - + Change Appearance of selected Lines Изменить внешний вид выбранных линий @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw Технический чертёж - + Add Centerline to Faces Добавить Осевую линию к Граням @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw Технический чертёж - + Add Leaderline to View Добавить линию-выноску в Вид @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw Технический чертёж - + Add Midpoint Vertices Добавить вершины по центрам граней @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw Технический чертёж - + Add Quadrant Vertices Добавить 4-ре вершины по краям окружности @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw Технический чертёж - + Insert Rich Text Annotation Вставка аннотаций форматированным текстом @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw Технический чертёж - + Show/Hide Invisible Edges Показать/скрыть невидимые края @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw Технический чертёж - + Create a Surface Finish Symbol Создать символ финиширования поверхности - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Выберите представление<br> - нажмите эту кнопку<br> - выбрать атрибуты обозначения шероховатости поверхности в открывшейся панели @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw Технический чертёж - + Add Welding Information to Leaderline Добавить информацию о сварке в указательную линию @@ -1996,23 +1996,23 @@ Создать электронную таблицу - + Save page to dxf Сохранить лист в DXF формате - + Add Midpoint Vertices Добавить вершины по центрам граней - + Add Quadrant Vertices Добавить 4-ре вершины по краям окружности - + Create Annotation Создать Аннотацию @@ -2058,7 +2058,7 @@ Перетащите размер - + Create Balloon Создать позиционную выноску @@ -2073,8 +2073,8 @@ Создать центральную линию - + Create Cosmetic Line Создать Косметическую Линию @@ -2415,7 +2415,7 @@ Изменить формат - + Surface Finish Symbols Символы финиша поверхности @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Неправильное выделение @@ -2744,9 +2744,10 @@ Не найдено объектов профиля в выборке - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Некорректный выбор - + Select an object first Сначала выберите объект - + Too many objects selected Выбрано слишком много объектов - + Create a page first. Сначала создайте страницу. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Нет видов детали в выбранном. @@ -2906,8 +2906,6 @@ Выбранная грань - BSpline. Радиус будет приблизительным. Продолжить? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Некорректный выбор @@ -3058,56 +3058,9 @@ Выберите 2 точечные объекты и 1 Вид. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Задача в процессе - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Задача в процессе + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Закройте окно активной задачи и повторите снова. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Неправильный выбор - + Can not attach leader. No base View selected. Не могу прикрепить указательную линию. Базовый вид не выбран. - - - - + + + + You must select a base View for the line. Необходимо выбрать базовый вид для линии. - - + + No DrawViewPart objects in this selection Нет объектов DrawViewPart в выбранном - - + + No base View in Selection. Нет базового вида в выбранном. - + You must select Faces or an existing CenterLine. Вы должны выбрать Грани или существующую Осевую Линию. - + No CenterLine in selection. В выбранном нет ОсевойЛинии. - - - + + + Selection is not a CenterLine. Выделение не является центральной линией. - + Selection not understood. Выделение не понятно. - + You must select 2 Vertexes or an existing CenterLine. Вы должны выбрать 2 вершины или существующую осевую линию. - + Need 2 Vertices or 1 CenterLine. Требуется две вершины или одна центральная линия. - - + + Selection is empty. Выделение пусто. - + Not enough points in selection. Выбрано недостаточно точек. - + Selection is not a Cosmetic Line. Выделенный объект не является вспомогательной линией. - + You must select 2 Vertexes. Вы должны выбрать 2 Вершины. - + You must select a base View for the circle. Вы должны выбрать базовый вид для круга. - + Please select a center for the circle. Пожалуйста, выберите центр для круга. - - + + Nothing selected Ничего не выбрано - + At least 1 object in selection is not a part view Минимум 1 объект в выбранном не является местным видом - + Unknown object type in selection Неизвестный тип объекта в выбранном - + No View in Selection. Нет Вида в выделенном. - + You must select a View and/or lines. Вы должны выбрать Вид и/или линии. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Выбор не является Косметическим кругом или Косметической дугой круга. - + No Part Views in this selection Нет видов Детали в этом выборе - + Select exactly one Leader line or one Weld symbol. Выберите только одну линию-выноску или один знак сварки. - - + + SurfaceFinishSymbols Символы шероховатости поверхности - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Нет просмотра части(детали) в выделении - + No %1 in Selection Нет %1 в выборе @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Вы уверены, что хотите продолжить? @@ -3459,9 +3469,9 @@ Создатель форматированного текста + - Rich text editor Редактор форматированного текста @@ -3579,8 +3589,8 @@ Править выносной элемент - + Edit %1 Редактировать %1 @@ -3699,14 +3709,12 @@ Подэлементы не выбраны - Selection is empty Пустое выделение - No object selected @@ -3748,12 +3756,12 @@ Выберите 2 вершины или 1 край - + Please select a Line Group Пожалуйста, выберите Группу строк - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Изменить штриховку грани - + Method Метод - + Addition Дополнительно - + Average roughness Средняя шероховатость - + Roughness sampling length Длина отсечки измерения шероховатости - + Lay symbol Символы рапространения шероховатости - + Minimum roughness grade number Минимальный номер марки шероховатности - + Maximum roughness grade number Максимальный номер марки шероховатности @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Вы не можете удалить эту размерную линию, потому что она содержит символ сварки, который может быть повреждён. - + You cannot delete this view because it has one or more dependent views that would become broken. Вы не можете удалить этот вид, потомучто это повредит один или более других зависимых от него видов. - + + + + - - - - - + + Object dependencies Зависимости объекта @@ -7401,6 +7409,8 @@ You can pick further points to get line segments. + + Top Сверху @@ -7411,6 +7421,8 @@ You can pick further points to get line segments. + + Left Слева @@ -7421,11 +7433,14 @@ You can pick further points to get line segments. + + Right Справа + Rear Сзади @@ -7436,6 +7451,8 @@ You can pick further points to get line segments. + + Bottom Снизу @@ -7486,6 +7503,35 @@ using the given X/Y Spacing Vertical space between border of projections Вертикальное пространство между границами проекций + + + + FrontTopLeft + Спереди сверху слева + + + + + FrontBottomRight + Спереди снизу справа + + + + + FrontTopRight + Спереди сверху справа + + + + + FrontBottomLeft + Спереди снизу слева + + + + Front + Спереди + TechDrawGui::TaskProjection @@ -7896,7 +7942,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Обозначения шероховатости поверхности @@ -8090,7 +8136,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Добавить осевую линию между 2 линиями @@ -8098,7 +8144,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Добавить осевую линию между 2 точками @@ -8114,7 +8160,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Вставить вспомогательную вершину в Вид @@ -8135,7 +8181,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Добавить Осевую линию к Граням @@ -8151,7 +8197,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Вставить вспомогательные вершины по центру выбранных ребер @@ -8159,7 +8205,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Вставить вспомогательные вершины в четырех крайних точках выбранной окружности @@ -8942,12 +8988,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw Технический чертёж - + Add Cosmetic Circle Добавить косметический круг diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 494af75ae6..ec9d77910e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj središčnico med dve točki @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodaj razpolovišča @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodaj četrtinska oglišča @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Lines Dodaj središčnico med dve daljici @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TehRisanje - + Add Centerline between 2 Points Dodaj središčnico med dve točki @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TehRisanje - + Add Cosmetic Line Through 2 Points Dodaj skozi dve točki dopolnilno daljco @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TehRisbe (TechDraw) - + Insert Annotation Vstavi Pripis @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TehRisanje - + Insert Center Line Vstavi središčnico - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TehRisanje - + Remove Cosmetic Object Odstrani dopolnilni predmet @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TehRisanje - + Add Cosmetic Vertex Dodaj dopolnilno oglišče @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TehRisanje - + Insert Cosmetic Vertex Vstavi dopolnilno oglišče - + Add Cosmetic Vertex Dodaj dopolnilno oglišče @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TehRisanje - + Change Appearance of Lines Spremeni videz črt - + Change Appearance of selected Lines Spremeni videz črt @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TehRisanje - + Add Centerline to Faces Dodaj ploskvam središčnico @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TehRisanje - + Add Leaderline to View Dodaj pogledu opisnično črto @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TehRisanje - + Add Midpoint Vertices Dodaj razpolovišča @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TehRisanje - + Add Quadrant Vertices Dodaj četrtinska oglišča @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TehRisanje - + Insert Rich Text Annotation Vstavi pripis z obogatenim besedilom @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TehRisanje - + Show/Hide Invisible Edges Prikaži/skrij nevidne robove @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TehRisanje - + Create a Surface Finish Symbol Ustvari znak površinske obdelave - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Izberi pogled<br> - kliknite ta gumb<br> - izberite značilke znaka površinske obdelave v odprtem oknu @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TehRisanje - + Add Welding Information to Leaderline Dodaj opisnici podatek o varjenju @@ -1996,23 +1996,23 @@ Ustvari preglednični pogled - + Save page to dxf Shrani stran kot DXF - + Add Midpoint Vertices Dodaj razpolovišča - + Add Quadrant Vertices Dodaj četrtinska oglišča - + Create Annotation Ustvari pripis @@ -2058,7 +2058,7 @@ Vleci koto - + Create Balloon Ustvari opisnico @@ -2073,8 +2073,8 @@ Ustvari Središčnico - + Create Cosmetic Line Ustvari dopolnilno črto @@ -2415,7 +2415,7 @@ Prilagodi obliko - + Surface Finish Symbols Znaki površinske obdelave @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Napačna izbira @@ -2744,9 +2744,10 @@ V izboru ni nobenega prereznega predmeta - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Nepravilen izbor - + Select an object first Izberite najprej predmet - + Too many objects selected Izbranih je preveč predmetov - + Create a page first. Najprej ustvarite stran. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. V izboru ni pogleda na del. @@ -2906,8 +2906,6 @@ Izbrani rob je B-zlepek. Polmer bo približen. Nadaljevanje? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Nepravilna Izbira @@ -3058,56 +3058,9 @@ Izberite dva točkovna predmeta in en pogled. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Opravilo je v teku - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Opravilo je v teku + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Zapri dejavno pogovorno okno z opravili in poskusi ponovno. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Napačen izbor - + Can not attach leader. No base View selected. Opisnice ni mogoče pripeti. Noben osnovni pogled ni izbran. - - - - + + + + You must select a base View for the line. Za črto morate izbrati pogled predloge. - - + + No DrawViewPart objects in this selection Nobenega očrtovalnega pogleda ni v izboru - - + + No base View in Selection. Nobenega osnovnega pogleda ni v izboru. - + You must select Faces or an existing CenterLine. Izbrati morate ploskve ali obstoječo središčnico. - + No CenterLine in selection. V izboru ni nobene središčnice. - - - + + + Selection is not a CenterLine. Izbrano ni središčnica. - + Selection not understood. Izbor ni razumljiv. - + You must select 2 Vertexes or an existing CenterLine. Izbrati morate 2 oglišči ali obstoječo središčnico. - + Need 2 Vertices or 1 CenterLine. Potrebni sta dve oglišči ali ena središčnica. - - + + Selection is empty. Nič ni izbrano. - + Not enough points in selection. Izbranih je premalo točk. - + Selection is not a Cosmetic Line. Izbrano ni dopolnilna daljica. - + You must select 2 Vertexes. Izbrani morate dve oglišči. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nič ni izbrano - + At least 1 object in selection is not a part view Vsaj en predmet v izboru ni pogled - + Unknown object type in selection V izboru je nepoznana vrsta predmeta - + No View in Selection. V izboru ni nobenega pogleda. - + You must select a View and/or lines. Izbrati morate pogled in/ali daljice. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection V tem izboru ni pogledov na dele - + Select exactly one Leader line or one Weld symbol. Izberite natanko eno opisnično črto ali eno oznako za zvar. - - + + SurfaceFinishSymbols Znaki površinske obdelave - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Nobenega pogleda dela ni v izboru - + No %1 in Selection V izboru ni: %1 @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Ali ste prepričani da želite nadaljevati? @@ -3459,9 +3469,9 @@ Ustvarjalnik obogatenega besedila + - Rich text editor Urejevalnik obogatenega besedila @@ -3579,8 +3589,8 @@ Uredi podrobni pogled - + Edit %1 Uredi %1 @@ -3699,14 +3709,12 @@ Nobene izbrane podprvine - Selection is empty Nič ni izbrano - No object selected @@ -3748,12 +3756,12 @@ Izberite 2 oglišči ali 1 rob - + Please select a Line Group Izberite skupino črt - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Uredi črtkanje ploskve - + Method Način - + Addition Dodajanje - + Average roughness Povprečna hrapavost - + Roughness sampling length Dolžina vzorčenja hrapavosti - + Lay symbol Kakovostni znak - + Minimum roughness grade number Najmanjša vrednost hrapavosti - + Maximum roughness grade number Najvišja vrednost hrapavosti @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Te opisnične črte ne morete izbrisati, ker vsebuje oznako za varjenje, ki bi postala okvarjena. - + You cannot delete this view because it has one or more dependent views that would become broken. Tega pogleda ne morete izbrisati, ker vsebuje enega ali več odvisnih pogledov, ki bi se tako pokvarili. - + + + + - - - - - + + Object dependencies Odvisnosti predmetov @@ -7405,6 +7413,8 @@ Izberete lahko še druge točke, da dobite črtne odseke. + + Top Zgoraj @@ -7415,6 +7425,8 @@ Izberete lahko še druge točke, da dobite črtne odseke. + + Left Levo @@ -7425,11 +7437,14 @@ Izberete lahko še druge točke, da dobite črtne odseke. + + Right Desno + Rear Zadaj @@ -7440,6 +7455,8 @@ Izberete lahko še druge točke, da dobite črtne odseke. + + Bottom Spodaj @@ -7490,6 +7507,35 @@ s pomočjo podanih X/Y odmikov Vertical space between border of projections Navpični odmik med mejami preslikav + + + + FrontTopLeft + Spredaj-levo-zgoraj + + + + + FrontBottomRight + Spredaj-desno-spodaj + + + + + FrontTopRight + Spredaj-desno-zgoraj + + + + + FrontBottomLeft + Spredaj-levo-spodaj + + + + Front + Spredaj + TechDrawGui::TaskProjection @@ -7900,7 +7946,7 @@ s pomočjo podanih X/Y odmikov TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Znaki površinske obdelave @@ -8094,7 +8140,7 @@ s pomočjo podanih X/Y odmikov TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Doda somernico med dve daljici @@ -8102,7 +8148,7 @@ s pomočjo podanih X/Y odmikov TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Doda somernico med dve točki @@ -8118,7 +8164,7 @@ s pomočjo podanih X/Y odmikov TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Vstavi v pogled dopolnilno oglišče @@ -8139,7 +8185,7 @@ s pomočjo podanih X/Y odmikov TechDraw_FaceCenterLine - + Adds a Centerline to Faces Doda ploskvam središčnico @@ -8155,7 +8201,7 @@ s pomočjo podanih X/Y odmikov TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Vstavi dopolnilna oglišča na sredino izbranih robov @@ -8163,7 +8209,7 @@ s pomočjo podanih X/Y odmikov TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Vstavi dopolnilna oglišča na četrtinke izbranih krožnic @@ -8945,12 +8991,12 @@ ker je odprto pogovorno okno. CmdTechDrawCosmeticCircle - + TechDraw TehRisbe (TechDraw) - + Add Cosmetic Circle Dodaj dopolnilni krog diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts index 56174dee0d..4541051b30 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Dodaj osnu liniju između dve linije @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Dodaj osnu liniju između dve tačke @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Dodaj središnje tačke @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Dodaj kvadrant tačke @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Dodaj osnu liniju između dve linije @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Dodaj osnu liniju između dve tačke @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Dodaj pomoćnu liniju kroz dve tačke @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Unesi Napomenu @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Umetni osnu liniju - + Add Centerline to Faces Dodaj osnu liniju stranicama @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Ukloni pomoćni objekat @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Dodaj pomoćnu tačku @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Umetni pomoćnu tačku - + Add Cosmetic Vertex Dodaj pomoćnu tačku @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Promeni izgled linija - + Change Appearance of selected Lines Promenite izgled izabranih linija @@ -395,12 +395,12 @@ Extend Line - Produži Liniju + Produži liniju Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool - Produži pomoćnu liniju, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku + Produži pomoćnu duž, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku @@ -532,7 +532,7 @@ Change the attributes of cosmetic lines and centerlines:<br>- Specify the line attributes (optional)<br>- Select one or more lines<br>- Click this tool - Promeni osobine pomoćnih linija, osnih linija i simetrala:<br>- Navedi osobine linije (neobavezno)<br>- Izaberi jednu ili više linija<br>- Klikni na ovu alatku + Promeni osobine pomoćnih duži, osnih linija i simetrala:<br>- Navedi osobine linije (neobavezno)<br>- Izaberi jednu ili više linija<br>- Klikni na ovu alatku @@ -918,13 +918,13 @@ Extend Line - Produži Liniju + Produži liniju Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool - Produži pomoćnu liniju, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku + Produži pomoćnu duž, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku @@ -1053,12 +1053,12 @@ Add Cosmetic Parallel Line - Dodaj pomoćnu paralelnu liniju + Dodaj pomoćnu paralelnu duž Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Dodaj pomoćnu liniju paralelnu drugoj liniji kroz tačku:<br>- Izaberi liniju<br>- Izaberi tačku<br>- Klikni na ovu alatku + Dodaj pomoćnu duž paralelnu drugoj duž kroz tačku:<br>- Izaberi duž<br>- Izaberi tačku<br>- Klikni na ovu alatku @@ -1072,13 +1072,13 @@ Add Cosmetic Parallel Line - Dodaj pomoćnu paralelnu liniju + Dodaj pomoćnu paralelnu duž Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Dodaj pomoćnu liniju paralelnu drugoj liniji kroz tačku:<br>- Izaberi liniju<br>- Izaberi tačku<br>- Klikni na ovu alatku + Dodaj pomoćnu duž paralelnu drugoj duž kroz tačku:<br>- Izaberi duž<br>- Izaberi tačku<br>- Klikni na ovu alatku @@ -1092,13 +1092,13 @@ Add Cosmetic Perpendicular Line - Dodaj pomoćnu upravnu liniju + Dodaj pomoćnu normalu Add a cosmetic line perpendicular to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Dodaj pomoćnu liniju upravnu na dugu liniju kroz tačku:<br>- Izaberi liniju<br>- Izaberi tačku<br>- Klikni na ovu alatku + Dodaj pomoćnu duž upravnu na dugu duž kroz tačku:<br>- Izaberi duž<br>- Izaberi tačku<br>- Klikni na ovu alatku @@ -1250,7 +1250,7 @@ Shorten a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool - Skrati pomoćnu liniju, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku + Skrati pomoćnu duž, simetralu ili osnu liniju na oba kraja:<br>- Navedi delta rastojanje (neobavezno)<br>- Izaberi liniju<br>- Klikni na ovu alatku @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Dodaj osnu liniju stranicama @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Dodaj pokaznu liniju u pogled @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Dodaj središnje tačke @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Dodaj kvadrant tačke @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Unesi formatiranu Napomenu @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Prikaži/sakrij nevidljive ivice @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Napravi oznaku kvaliteta obrađene površine - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Izaberi pogled<br> - Klikni na ovu alatku<br> - U otvorenom panelu napravi oznaku kvaliteta površine @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Dodaj informacije o varu pokaznoj liniji @@ -1996,23 +1996,23 @@ Napravi pogled of tabele - + Save page to dxf Sačuvaj crtež kao dxf - + Add Midpoint Vertices Dodaj središnje tačke - + Add Quadrant Vertices Dodaj kvadrant tačke - + Create Annotation Napravi napomenu @@ -2058,7 +2058,7 @@ Prevuci kotu - + Create Balloon Napravi pozicionu oznaku @@ -2073,10 +2073,10 @@ Napravi osnu liniju - + Create Cosmetic Line - Napravi pomoćnu liniju + Napravi pomoćnu duž @@ -2086,7 +2086,7 @@ Update CosmeticLine - Ažuriraj pomoćnu liniju + Ažuriraj pomoćnu duž @@ -2362,12 +2362,12 @@ TechDraw Cosmetic Line Parallel/Perpendicular - TechDraw Pomoćna linija paralelna/normalna + TechDraw Pomoćna duž paralelna/normalna Cosmetic Line Parallel/Perpendicular - Pomoćna linija paralelna/normalna + Pomoćna duž paralelna/normalna @@ -2415,7 +2415,7 @@ Prilagodi format - + Surface Finish Symbols Oznaka kvaliteta površine @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Pogrešan izbor @@ -2744,9 +2744,10 @@ Nije izabran objekat sa profilom - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Pogrešan izbor - + Select an object first Prvo izaberi objekat - + Too many objects selected Previše objekata je izabrano - + Create a page first. Prvo napravi stranicu. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Nije izabran pogled dela. @@ -2906,8 +2906,6 @@ Izabrana ivica je B-Splajn. Radijus će biti približan. Nastavi? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Pogrešan izbor @@ -3058,56 +3058,9 @@ Izaberi 2 tačkasta objekta i 1 pogled. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Zadatak u toku - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Zadatak u toku + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Zatvori dijalog aktivnog zadatka i pokušaj ponovo. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Pogrešan izbor - + Can not attach leader. No base View selected. Ne mogu pričvrstiti pokaznu oznaku. Nije izabran osnovni pogled. - - - - + + + + You must select a base View for the line. Morate izabrati osnovni pogled za liniju. - - + + No DrawViewPart objects in this selection Nije izabran nijedan pogled - - + + No base View in Selection. Nije izabran osnovni pogled. - + You must select Faces or an existing CenterLine. Moraš izabrati stranice ili postojeću osnu liniju. - + No CenterLine in selection. Nije izabrana osna linija. - - - + + + Selection is not a CenterLine. Izabrano nije osna linija. - + Selection not understood. Izbor nije shvaćen. - + You must select 2 Vertexes or an existing CenterLine. Moraš izabrati 2 temena ili postojeću osnu liniju. - + Need 2 Vertices or 1 CenterLine. Potrebna su 2 temena ili 1 osna linija. - - + + Selection is empty. Nisi ništa izabrao. - + Not enough points in selection. Izabrano je nedovoljno tačaka. - + Selection is not a Cosmetic Line. Nije izabrana pomoćna linija. - + You must select 2 Vertexes. Moraš izabrati 2 temena. - + You must select a base View for the circle. Moraš izabrati osnovni pogled za kružnicu. - + Please select a center for the circle. Izaberi centar kružnice. - - + + Nothing selected Ništa nije izabrano - + At least 1 object in selection is not a part view Izabran je najmanje jedan objekat koji nije pogled dela - + Unknown object type in selection Izabran je nepoznati tip objekta - + No View in Selection. Nije izabran pogled. - + You must select a View and/or lines. Moraš izabrati pogled i/ili linije. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Izabrano nije pomoćna kružnica ili pomoćni kružni luk. - + No Part Views in this selection Nije izabran pogled dela - + Select exactly one Leader line or one Weld symbol. Izaberi tačno jednu pokaznu liniju ili simbol zavarivanja. - - + + SurfaceFinishSymbols Oznaka kvaliteta površine - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Nije izabran pogled dela - + No %1 in Selection Nije izabran %1 @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Da li si siguran da želiš da nastaviš? @@ -3459,9 +3469,9 @@ Tvorac formatiranog teksta + - Rich text editor Urednik za formatiranje teksta @@ -3561,12 +3571,12 @@ Create Cosmetic Line - Napravi pomoćnu liniju + Napravi pomoćnu duž Edit Cosmetic Line - Uredi pomoćnu liniju + Uredi pomoćnu duž @@ -3579,8 +3589,8 @@ Uredi detaljni pogled - + Edit %1 Uredi %1 @@ -3699,14 +3709,12 @@ Nema izabranih podelemenata - Selection is empty Nisi ništa izabrao - No object selected @@ -3748,12 +3756,12 @@ Izaberi 2 temena ili 1 ivicu - + Please select a Line Group Izaberi grupu linija - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Uredi šrafuru stranice - + Method Metod - + Addition Dodatak za mašinsku obradu - + Average roughness Hrapavost - + Roughness sampling length Referentna dužina - + Lay symbol Pravac prostiranja neravnina - + Minimum roughness grade number Minimalna klasa hrapavosti - + Maximum roughness grade number Maksimalna klasa hrapavosti @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Ne možeš da obrišeš ovu pokaznu liniju jer ima simbol zavarivanja koji bi se pokvario. - + You cannot delete this view because it has one or more dependent views that would become broken. Ne možeš obrisati ovaj pogled jer ima jedan ili više zavisnih objekata koji će postati neispravni. - + + + + - - - - - + + Object dependencies Međuzavisnosti objekata @@ -4519,7 +4527,7 @@ when hatching a face with a PAT pattern Line - Linija + Duž @@ -5173,12 +5181,12 @@ for ProjectionGroups ANSI - ANSI + ANSI ISO - ISO + ISO @@ -5729,7 +5737,7 @@ Da li želiš da nastaviš? Line - Linija + Duž @@ -6157,7 +6165,7 @@ Da li želiš da nastaviš? Cosmetic Line - Pomoćna linija + Pomoćna duž @@ -6168,13 +6176,13 @@ Da li želiš da nastaviš? 2d Point - 2d Tačka + 2D Tačka 3d Point - 3d Tačka + 3D Tačka @@ -7401,6 +7409,8 @@ Možeš odabrati dodatne tačke da bi dobio segmente linija. + + Top Odozgo @@ -7411,6 +7421,8 @@ Možeš odabrati dodatne tačke da bi dobio segmente linija. + + Left Sleva @@ -7421,11 +7433,14 @@ Možeš odabrati dodatne tačke da bi dobio segmente linija. + + Right Sdesna + Rear Straga @@ -7436,6 +7451,8 @@ Možeš odabrati dodatne tačke da bi dobio segmente linija. + + Bottom Odozdo @@ -7485,6 +7502,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertikalni razmak između osnovnih pogleda + + + + FrontTopLeft + SpredaOdozgoSleva + + + + + FrontBottomRight + SpredaOdozdoSdesna + + + + + FrontTopRight + SpredaOdozgoSdesna + + + + + FrontBottomLeft + SpredaOdozdoSleva + + + + Front + Spreda + TechDrawGui::TaskProjection @@ -7895,7 +7941,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Oznaka kvaliteta površine @@ -7952,7 +7998,7 @@ using the given X/Y Spacing ISO - ISO + ISO @@ -8089,7 +8135,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Dodaje osnu liniju između dve linije @@ -8097,7 +8143,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Dodaje osnu liniju između dve tačke @@ -8113,7 +8159,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Umetni pomoćnu tačku u pogled @@ -8134,7 +8180,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Dodaje osnu liniju stranicama @@ -8150,7 +8196,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Umeće pomoćne tačke u sredine izabranih ivica @@ -8158,7 +8204,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Umetni pomoćne tačke i kvadrantnim tačkama izabranog kruga @@ -8875,7 +8921,7 @@ postoji otvoren panel zadataka. 2d Point - 2d Tačka + 2D Tačka @@ -8885,7 +8931,7 @@ postoji otvoren panel zadataka. 3d Point - 3d Tačka + 3D Tačka @@ -8941,12 +8987,12 @@ postoji otvoren panel zadataka. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Dodaj pomoćnu kružnicu diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 6be29e953e..b6d4f5a4aa 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Додај осну линију између две линије @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Додај осну линију између две тачке @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Додај средишње тачке @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Додај квадрант тачке @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Додај осну линију између две линије @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Додај осну линију између две тачке @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Додај помоћну линију кроз две тачке @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Унеси Напомену @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Уметни осну линију - + Add Centerline to Faces Додај осну линију страницама @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Уклони помоћни објекат @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Додај помоћну тачку @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Уметни помоћну тачку - + Add Cosmetic Vertex Додај помоћну тачку @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Промени изглед линија - + Change Appearance of selected Lines Промените изглед изабраних линија @@ -395,12 +395,12 @@ Extend Line - Продужи Линију + Продужи линију Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool - Продужи помоћну линију, симетралу или осну линију на оба краја:<br>- Наведи делта растојање (необавезно)<br>- Изабери линију<br>- Кликни на ову алатку + Продужи помоћну дуж, симетралу или осну линију на оба краја:<br>- Наведи делта растојање (необавезно)<br>- Изабери линију<br>- Кликни на ову алатку @@ -532,7 +532,7 @@ Change the attributes of cosmetic lines and centerlines:<br>- Specify the line attributes (optional)<br>- Select one or more lines<br>- Click this tool - Промени особине помоћних линија, осних линија и симетрала:<br>- Наведи особине линије (необавезно)<br>- Изабери једну или више линија<br>- Кликни на ову алатку + Промени особине помоћних дужи, осних линија и симетрала:<br>- Наведи особине линије (необавезно)<br>- Изабери једну или више линија<br>- Кликни на ову алатку @@ -918,13 +918,13 @@ Extend Line - Продужи Линију + Продужи линију Extend a cosmetic line or centerline at both ends:<br>- Specify the delta distance (optional)<br>- Select a single line<br>- Click this tool - Продужи помоћну линију, симетралу или осну линију на оба краја:<br>- Наведи делта растојање (необавезно)<br>- Изабери линију<br>- Кликни на ову алатку + Продужи помоћну дуж, симетралу или осну линију на оба краја:<br>- Наведи делта растојање (необавезно)<br>- Изабери линију<br>- Кликни на ову алатку @@ -1053,12 +1053,12 @@ Add Cosmetic Parallel Line - Додај помоћну паралелну линију + Додај помоћну паралелну дуж Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Додај помоћну линију паралелну другој линији кроз тачку:<br>- Изабери линију<br>- Изабери тачку<br>- Кликни на ову алатку + Додај помоћну дуж паралелну другој дуж кроз тачку:<br>- Изабери дуж<br>- Изабери тачку<br>- Кликни на ову алатку @@ -1072,13 +1072,13 @@ Add Cosmetic Parallel Line - Додај помоћну паралелну линију + Додај помоћну паралелну дуж Add a cosmetic line parallel to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Додај помоћну линију паралелну другој линији кроз тачку:<br>- Изабери линију<br>- Изабери тачку<br>- Кликни на ову алатку + Додај помоћну дуж паралелну другој дужи кроз тачку:<br>- Изабери дуж<br>- Изабери тачку<br>- Кликни на ову алатку @@ -1092,13 +1092,13 @@ Add Cosmetic Perpendicular Line - Додај помоћну управну линију + Додај помоћну нормалу Add a cosmetic line perpendicular to another line through a vertex:<br>- Select a line<br>- Select a vertex<br>- Click this tool - Додај помоћну линију управну на другу линију кроз тачку:<br>- Изабери линију<br>- Изабери тачку<br>- Кликни на ову алатку + Додај помоћну дуж управну на другу дуж кроз тачку:<br>- Изабери дуж<br>- Изабери тачку<br>- Кликни на ову алатку @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Додај осну линију страницама @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Додај показну линију у поглед @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Додај средишње тачке @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Додај квадрант тачке @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Унеси форматирану Напомену @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Прикажи/сакриј невидљиве ивице @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Направи ознаку квалитета обрађене површине - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Изабери поглед<br> - Кликни на ову алатку<br> - У отвореном панелу направи ознаку @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Додај информације о вару показној линији @@ -1996,23 +1996,23 @@ Направи поглед од табеле - + Save page to dxf Сачувај цртеж као dxf - + Add Midpoint Vertices Додај средишње тачке - + Add Quadrant Vertices Додај квадрант тачке - + Create Annotation Направи Напомену @@ -2058,7 +2058,7 @@ Превуци коту - + Create Balloon Направи позициону ознаку @@ -2073,10 +2073,10 @@ Направи Осну линију - + Create Cosmetic Line - Направипомоћну линију + Направи помоћну дуж @@ -2086,7 +2086,7 @@ Update CosmeticLine - Ажурирај помоћну линију + Ажурирај помоћну дуж @@ -2362,12 +2362,12 @@ TechDraw Cosmetic Line Parallel/Perpendicular - TechDraw Помоћна линија паралелна/нормална + TechDraw Помоћна дуж паралелна/нормална Cosmetic Line Parallel/Perpendicular - Помоћна линија паралелна/нормална + Помоћна дуж паралелна/нормална @@ -2415,7 +2415,7 @@ Прилагоди формат - + Surface Finish Symbols Ознаку квалитета површине @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Погрешан избор @@ -2744,9 +2744,10 @@ Није изабран објекат са профилом - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Погрешан избор - + Select an object first Прво изабери објекат - + Too many objects selected Превише објеката је изабрано - + Create a page first. Прво направи страницу. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Није изабран поглед дела. @@ -2906,8 +2906,6 @@ Изабрана ивица је Б-Сплајн. Полупречник ће бити приближан. Настави? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Погрешан избор @@ -3058,56 +3058,9 @@ Изабери 2 тачкаста објекта и 1 поглед. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Задатак у току - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Задатак у току + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Затвори дијалог активног задатка и покушај поново. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Погрешан избор - + Can not attach leader. No base View selected. Не могу причврстити показну ознаку. Није изабран основни поглед. - - - - + + + + You must select a base View for the line. Морате изабрати основни поглед за линију. - - + + No DrawViewPart objects in this selection Није изабран ниједан поглед - - + + No base View in Selection. Није изабран основни поглед. - + You must select Faces or an existing CenterLine. Мораш изабрати странице или постојећу осну линију. - + No CenterLine in selection. Није изабрана осна линија. - - - + + + Selection is not a CenterLine. Изабрано није осна линија. - + Selection not understood. Избор није схваћен. - + You must select 2 Vertexes or an existing CenterLine. Мораш изабрати 2 темена или постојећу осну линију. - + Need 2 Vertices or 1 CenterLine. Потребна су 2 темена или 1 осна линија. - - + + Selection is empty. Ниси ништа изабрао. - + Not enough points in selection. Изабрано је недовољно тачака. - + Selection is not a Cosmetic Line. Није изабрана помоћна линија. - + You must select 2 Vertexes. Мораш изабрати 2 темена. - + You must select a base View for the circle. Мораш изабрати основни поглед за кружницу. - + Please select a center for the circle. Изабери центар кружнице. - - + + Nothing selected Ништа није изабрано - + At least 1 object in selection is not a part view Изабран је најмање један објекат који није поглед дела - + Unknown object type in selection Изабран је непознати тип објекта - + No View in Selection. Није изабран поглед. - + You must select a View and/or lines. Мораш изабрати поглед и/или линије. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Изабрано није помоћна кружница или помоћни кружни лук. - + No Part Views in this selection Није изабран поглед дела - + Select exactly one Leader line or one Weld symbol. Изабери тачно једну показну линију или симбол заваривања. - - + + SurfaceFinishSymbols Ознаку квалитета површине - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Није изабран поглед дела - + No %1 in Selection Није изабран %1 @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Да ли си сигуран да желиш да наставиш? @@ -3459,9 +3469,9 @@ Творац форматираног текста + - Rich text editor Уредник форматираног текста @@ -3561,12 +3571,12 @@ Create Cosmetic Line - Направипомоћну линију + Направи помоћну дуж Edit Cosmetic Line - Уреди помоћну линију + Уреди помоћну дуж @@ -3579,8 +3589,8 @@ Уреди детаљни поглед - + Edit %1 Уреди %1 @@ -3699,14 +3709,12 @@ Нема изабраних поделемената - Selection is empty Ниси ништа изабрао - No object selected @@ -3748,12 +3756,12 @@ Изабери 2 темена или 1 ивицу - + Please select a Line Group Изабери групу линија - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Уреди шрафуру странице - + Method Метод - + Addition Додатак за машинску обраду - + Average roughness Храпавост - + Roughness sampling length Референтна дужина - + Lay symbol Правац простирања неравнина - + Minimum roughness grade number Минимална класа храпавости - + Maximum roughness grade number Максимална класа храпавости @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Не можеш да обришеш ову показну линију јер има симбол заваривања који би се покварио. - + You cannot delete this view because it has one or more dependent views that would become broken. Не можеш обрисати овај поглед јер има један или више зависних објеката који ће постати неисправни. - + + + + - - - - - + + Object dependencies Међузависности објеката @@ -4519,7 +4527,7 @@ when hatching a face with a PAT pattern Line - Линија + Дуж @@ -5173,12 +5181,12 @@ for ProjectionGroups ANSI - ANSI + ANSI ISO - ISO + ISO @@ -5729,7 +5737,7 @@ Do you want to continue? Line - Линија + Дуж @@ -6157,7 +6165,7 @@ Do you want to continue? Cosmetic Line - Помоћна линија + Помоћна дуж @@ -6168,13 +6176,13 @@ Do you want to continue? 2d Point - 2д Тачка + 2Д Тачка 3d Point - 3д Тачка + 3Д Тачка @@ -7401,6 +7409,8 @@ You can pick further points to get line segments. + + Top Одозго @@ -7411,6 +7421,8 @@ You can pick further points to get line segments. + + Left Слева @@ -7421,11 +7433,14 @@ You can pick further points to get line segments. + + Right Сдесна + Rear Страга @@ -7436,6 +7451,8 @@ You can pick further points to get line segments. + + Bottom Одоздо @@ -7485,6 +7502,35 @@ using the given X/Y Spacing Vertical space between border of projections Вертикални размак између основних погледа + + + + FrontTopLeft + СпредаОдозгоСлева + + + + + FrontBottomRight + СпредаОдоздоСдесна + + + + + FrontTopRight + СпредаОдозгоСдесна + + + + + FrontBottomLeft + СпредаОдоздоСлева + + + + Front + Спреда + TechDrawGui::TaskProjection @@ -7895,7 +7941,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Ознаку квалитета површине @@ -7952,7 +7998,7 @@ using the given X/Y Spacing ISO - ISO + ISO @@ -8089,7 +8135,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Додаје осну линију између две линије @@ -8097,7 +8143,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Додаје осну линију између две тачке @@ -8113,7 +8159,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Уметни помоћну тачку у поглед @@ -8134,7 +8180,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Додаје осну линију страницама @@ -8150,7 +8196,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Умеће помоћне тачке у средине изабраних ивица @@ -8158,7 +8204,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Уметни помоћне тачке у квадрантне тачке изабраног круга @@ -8875,7 +8921,7 @@ there is an open task dialog. 2d Point - 2д Тачка + 2Д Тачка @@ -8885,7 +8931,7 @@ there is an open task dialog. 3d Point - 3д Тачка + 3Д Тачка @@ -8941,12 +8987,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Додај помоћну кружницу diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 9fd201cdb9..b0109143aa 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Lägg till mittlinje mellan 2 linjer @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Lägg till mittlinje mellan 2 punkter @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Lägg till mittpunktsvertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Lägg till kvadrantver @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Lägg till mittlinje mellan 2 linjer @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Lägg till mittlinje mellan 2 punkter @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Lägg till kosmetisk linje genom 2 punkter @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Infoga anteckning @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Infoga mittlinje - + Add Centerline to Faces Lägg till mittlinje i ansikten @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Ta bort kosmetiskt objekt @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Lägg till Kosmetiska Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Sätt in kosmetiska Vertex - + Add Cosmetic Vertex Lägg till Kosmetiska Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Ändra utseende på linjer - + Change Appearance of selected Lines Ändra utseende på valda linjer @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Lägg till mittlinje i ansikten @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Lägga till Leaderline i Visa @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Lägg till mittpunktsvertices @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Lägg till kvadrantver @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Infoga RTF-anteckning @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Visa/dölj osynliga kanter @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Lägg till svetsinformation till Leaderline @@ -1996,23 +1996,23 @@ Skapa kalkylbladsvy - + Save page to dxf Spara sida på dxf - + Add Midpoint Vertices Lägg till mittpunktsvertices - + Add Quadrant Vertices Lägg till kvadrantver - + Create Annotation Skapa anteckning @@ -2058,7 +2058,7 @@ Dra dimension - + Create Balloon Skapa ballong @@ -2073,8 +2073,8 @@ Skapa CenterLine - + Create Cosmetic Line Skapa kosmetisk linje @@ -2415,7 +2415,7 @@ Anpassa format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Fel val @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Felaktig markering - + Select an object first Markera ett objekt först - + Too many objects selected För många objekt markerade - + Create a page first. Skapa en sida först. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Ingen delvy i markeringen. @@ -2906,8 +2906,6 @@ Markerad kant är en B-spline, radie kommer att vara uppskattad. Fortsätt? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Felaktig markering @@ -3058,56 +3058,9 @@ Markera 2 punktobjekt och 1 Visa. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Uppgift pågår - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Uppgift pågår + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Stäng aktiv uppgiftsdialog och försök igen. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Fel val - + Can not attach leader. No base View selected. Kan inte bifoga hänvisning. Ingen basvy markerad. - - - - + + + + You must select a base View for the line. Du måste markera en basvy för linjen. - - + + No DrawViewPart objects in this selection Inga DrawViewPart-objekt i aktuell markering - - + + No base View in Selection. Ingen basvy i markering. - + You must select Faces or an existing CenterLine. Du måste välja Ansikten eller en befintlig CenterLine. - + No CenterLine in selection. Ingen CenterLine i markering. - - - + + + Selection is not a CenterLine. Markering är inte en CenterLine. - + Selection not understood. Urval inte förstått. - + You must select 2 Vertexes or an existing CenterLine. Du måste välja 2 Vertexes eller en befintlig CenterLine. - + Need 2 Vertices or 1 CenterLine. Behöver 2 Vertices eller 1 CenterLine. - - + + Selection is empty. Markeringen är tom. - + Not enough points in selection. Inte tillräckligt med poäng i markering. - + Selection is not a Cosmetic Line. Val är inte en Cosmetic Line. - + You must select 2 Vertexes. Du måste välja 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Inget markerat - + At least 1 object in selection is not a part view Ett eller flera objekt i markeringen är inte en delvy - + Unknown object type in selection Okänd objekttyp i markering - + No View in Selection. Ingen vy i markering. - + You must select a View and/or lines. Du måste välja en Visa och/eller rader. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Inga delvyer i det här valet - + Select exactly one Leader line or one Weld symbol. Välj exakt en Ledare fodrar eller en Svetsa symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Är du säker på att du vill fortsätta? @@ -3459,9 +3469,9 @@ Rich Text-skapare + - Rich text editor Rich Text-redigerare @@ -3579,8 +3589,8 @@ Redigera detaljvy - + Edit %1 Redigera %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Metod - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Du kan inte ta bort den här ledarlinjen eftersom den har en svetssymbol som skulle bli trasig. - + You cannot delete this view because it has one or more dependent views that would become broken. Du kan inte ta bort denna vy eftersom den har en eller flera beroende vyer som skulle brytas. - + + + + - - - - - + + Object dependencies Objektberoenden @@ -7405,6 +7413,8 @@ Du kan plocka ytterligare poäng för att få linjesegment. + + Top Topp @@ -7415,6 +7425,8 @@ Du kan plocka ytterligare poäng för att få linjesegment. + + Left Vänster @@ -7425,11 +7437,14 @@ Du kan plocka ytterligare poäng för att få linjesegment. + + Right Höger + Rear Bak @@ -7440,6 +7455,8 @@ Du kan plocka ytterligare poäng för att få linjesegment. + + Bottom Botten @@ -7490,6 +7507,35 @@ med hjälp av det givna X/Y-avstånden Vertical space between border of projections Vertikalt utrymme mellan gränsen för prognoser + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Front + TechDrawGui::TaskProjection @@ -7900,7 +7946,7 @@ med hjälp av det givna X/Y-avstånden TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8094,7 +8140,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Lägger till en Mittlinje mellan 2 linjer @@ -8102,7 +8148,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Lägger till en mittlinje mellan 2 punkter @@ -8118,7 +8164,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Infogar en kosmetisk Vertex i en Vy @@ -8139,7 +8185,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_FaceCenterLine - + Adds a Centerline to Faces Lägger till en mittlinje i Ansikten @@ -8155,7 +8201,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Infogar Kosmetiska Vertices vid Mittpunkten av valda Kanter @@ -8163,7 +8209,7 @@ med hjälp av det givna X/Y-avstånden TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Infogar kosmetiska vertices vid kvadrantpunkter av valda cirklar @@ -8946,12 +8992,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index e6e2e14182..9b757add4f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 2 çizgi arasına Merkez çizgisi ekler @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 2 nokta arasına Merkez çizgisi ekler @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Orta nokta köşeleri ekle @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Çeyrek daire köşeleri ekle @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Lines 2 çizgi arasına Merkez çizgisi ekler @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TeknikÇizim - + Add Centerline between 2 Points 2 nokta arasına Merkez çizgisi ekler @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TeknikÇizim - + Add Cosmetic Line Through 2 Points 2 nokta boyunca yardımcı doğru ekle @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TeknikÇizim - + Insert Annotation Açıklama girin @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TeknikÇizim - + Insert Center Line Yeni Eksen - + Add Centerline to Faces Yüzey(ler) e bir eksen ekle @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TeknikÇizim - + Remove Cosmetic Object Yardımcı nesneyi kaldır @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TeknikÇizim - + Add Cosmetic Vertex Yardımcı Nokta Ekle @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TeknikÇizim - + Insert Cosmetic Vertex Yardımcı nokta ekle - + Add Cosmetic Vertex Yardımcı Nokta Ekle @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TeknikÇizim - + Change Appearance of Lines Çizgilerin görünümünü değiştir - + Change Appearance of selected Lines Seçili Çizgilerin Görünümünü Değiştir @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TeknikÇizim - + Add Centerline to Faces Yüzey(ler) e bir eksen ekle @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TeknikÇizim - + Add Leaderline to View Görünüme Başlık Çizgisi Ekle @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TeknikÇizim - + Add Midpoint Vertices Orta nokta köşeleri ekle @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TeknikÇizim - + Add Quadrant Vertices Çeyrek daire köşeleri ekle @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TeknikÇizim - + Insert Rich Text Annotation Zengin metin dipnotu ekle @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TeknikÇizim - + Show/Hide Invisible Edges Görünmez kenarları Gizle/Göster @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TeknikÇizim - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TeknikÇizim - + Add Welding Information to Leaderline Başlık Çizgisine Kaynak Bilgileri Ekle @@ -1996,23 +1996,23 @@ Elektronik tablo görünümü oluştur - + Save page to dxf Sayfayı dxf olarak kaydedin - + Add Midpoint Vertices Orta nokta köşeleri ekle - + Add Quadrant Vertices Çeyrek daire köşeleri ekle - + Create Annotation Açıklama Oluşturun @@ -2058,7 +2058,7 @@ Ölçüyü Sürükle - + Create Balloon Balon Oluştur @@ -2073,8 +2073,8 @@ MerkezÇizgisi Oluştur - + Create Cosmetic Line Yardımcı çizgi oluştur @@ -2415,7 +2415,7 @@ Biçimi Özelleştir - + Surface Finish Symbols Yüzey Pürüzlülüğü Sembolleri @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Yanlış seçim @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Yanlış seçim - + Select an object first Önce bir nesne seçin - + Too many objects selected Çok fazla nesne seçili - + Create a page first. Önce bir sayfa oluşturun. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. Seçimde Parça Görünümü Yok. @@ -2906,8 +2906,6 @@ Seçili kenar bir BSpline'dır. Yarıçap yaklaşık olacaktır. Devam? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Hatalı seçim @@ -3058,56 +3058,9 @@ 2 nokta nesnesi ve 1 görünüm seçin(2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Devam eden görevler - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Devam eden görevler + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Etkin görev iletişim kutusunu kapatın ve yeniden deneyin. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Yanlış seçim - + Can not attach leader. No base View selected. Kılavuz eklenemiyor. Hiç bir temel görünüm seçilmedi. - - - - + + + + You must select a base View for the line. Çizgi için bir temel görünüm seçmelisiniz. - - + + No DrawViewPart objects in this selection Bu seçimde GörünümParçasıÇiz nesneleri yok - - + + No base View in Selection. Seçimde temel görünüm yok. - + You must select Faces or an existing CenterLine. Yüzey yada mevcut merkez doğrusu(CenterLine) seçiniz. - + No CenterLine in selection. Seçimde merkez doğrusu(CenterLine) yok. - - - + + + Selection is not a CenterLine. Seçim bir merkez doğrusu(CenterLine) değil. - + Selection not understood. Seçim anlaşılmadı. - + You must select 2 Vertexes or an existing CenterLine. 2 nokta yada mevcut merkez doğrusu(CenterLine) seçiniz. - + Need 2 Vertices or 1 CenterLine. 2 köse yada bir merkez doğrusu(CenterLine) ye ihtiyaç var. - - + + Selection is empty. Seçim boş. - + Not enough points in selection. Seçimde yeterli nokta yok. - + Selection is not a Cosmetic Line. Seçim bir yardımcı doğru değil. - + You must select 2 Vertexes. 2 Nokta seçmelisiniz. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Seçili hiçbir şey yok - + At least 1 object in selection is not a part view Seçimdeki en az 1 nesne bir parça görünümü değil - + Unknown object type in selection Seçimde bilinmeyen nesne tipi var - + No View in Selection. Seçimde görünüm yok. - + You must select a View and/or lines. Bir görünüm ve/veya çizgi seçmelisin. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection Bu seçimde Parça Görünümü yok - + Select exactly one Leader line or one Weld symbol. Tam olarak bir lider hattı(Leader line) yada bir kaynak(Weld) sembolü seçiniz. - - + + SurfaceFinishSymbols YüzeyPürüzlülüğüSembolleri - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection Seçimde Parça Görünümü Yok - + No %1 in Selection Seçimde %1 Yok @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Devam etmek istediğinizden emin misiniz? @@ -3459,9 +3469,9 @@ Zengin metin oluşturucusu + - Rich text editor Zengin metin düzenleyicisi @@ -3579,8 +3589,8 @@ Detaylı Görünümü düzenle - + Edit %1 %1'i düzenle @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Seçim boş - No object selected @@ -3748,12 +3756,12 @@ 2 Nokta veya 1 Kenar Seçin - + Please select a Line Group Lütfen bir Çizgi Grubu seçin - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Yüzey Taramasını Düzenle - + Method Yöntem - + Addition Ek - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Bu ölçü çizgisini silemezsiniz çünkü bozulabilecek bir kaynak sembolü içeriyor. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Nesne bağımlılıkları @@ -7401,6 +7409,8 @@ sonra en az ikinci bir noktayı seçin. + + Top üst @@ -7411,6 +7421,8 @@ sonra en az ikinci bir noktayı seçin. + + Left Sol @@ -7421,11 +7433,14 @@ sonra en az ikinci bir noktayı seçin. + + Right Sağ + Rear Arka @@ -7436,6 +7451,8 @@ sonra en az ikinci bir noktayı seçin. + + Bottom Alt @@ -7486,6 +7503,35 @@ gösterimleri otomatik dağıtır Vertical space between border of projections Çıkıntıların sınırları arasındaki dikey boşluk + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Ön + TechDrawGui::TaskProjection @@ -7896,7 +7942,7 @@ gösterimleri otomatik dağıtır TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Yüzey Pürüzlülüğü Sembolleri @@ -8090,7 +8136,7 @@ gösterimleri otomatik dağıtır TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 2 Çizgi arasına Eksen Çizgisi ekler @@ -8098,7 +8144,7 @@ gösterimleri otomatik dağıtır TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 2 Nokta arasında Eksen Çizgisi ekler @@ -8114,7 +8160,7 @@ gösterimleri otomatik dağıtır TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Görünüme Yardımcı Nokta Ekler @@ -8135,7 +8181,7 @@ gösterimleri otomatik dağıtır TechDraw_FaceCenterLine - + Adds a Centerline to Faces Yüzlere Eksen Çizgisi ekler @@ -8151,7 +8197,7 @@ gösterimleri otomatik dağıtır TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Seçili Kenarların Ortasına Yardımcı Noktalar Ekler @@ -8159,7 +8205,7 @@ gösterimleri otomatik dağıtır TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Seçili Çemberin Çeyrek Kısımlarına Yardımcı Noktalar Ekler @@ -8942,12 +8988,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TeknikÇizim - + Add Cosmetic Circle Yardımcı Çember Ekle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index ebab95d02b..2f14380e1d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Додати центрлінію між 2 лініями @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Додати центрлінію між 2 точками @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Add Midpoint Vertices @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Add Quadrant Vertices @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw ТехМалюнок - + Add Centerline between 2 Lines Додати центрлінію між 2 лініями @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw ТехМалюнок - + Add Centerline between 2 Points Додати центрлінію між 2 точками @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw ТехМалюнок - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw ТехМалюнок - + Insert Annotation Вставити нотатку @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw ТехМалюнок - + Insert Center Line Insert Center Line - + Add Centerline to Faces Add Centerline to Faces @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw ТехМалюнок - + Remove Cosmetic Object Remove Cosmetic Object @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw ТехМалюнок - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw ТехМалюнок - + Insert Cosmetic Vertex Insert Cosmetic Vertex - + Add Cosmetic Vertex Add Cosmetic Vertex @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw ТехМалюнок - + Change Appearance of Lines Змінити вигляд ліній - + Change Appearance of selected Lines Змінити вигляд вибраних ліній @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw ТехМалюнок - + Add Centerline to Faces Add Centerline to Faces @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw ТехМалюнок - + Add Leaderline to View Add Leaderline to View @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw ТехМалюнок - + Add Midpoint Vertices Add Midpoint Vertices @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw ТехМалюнок - + Add Quadrant Vertices Add Quadrant Vertices @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw ТехМалюнок - + Insert Rich Text Annotation Insert Rich Text Annotation @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw ТехМалюнок - + Show/Hide Invisible Edges Show/Hide Invisible Edges @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw ТехМалюнок - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw ТехМалюнок - + Add Welding Information to Leaderline Add Welding Information to Leaderline @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Зберегти сторінку в dxf файл - + Add Midpoint Vertices Add Midpoint Vertices - + Add Quadrant Vertices Add Quadrant Vertices - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Невірний вибір @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Некоректний вибір - + Select an object first Оберіть об'єкт для початку - + Too many objects selected Обрано забагато об'єктів - + Create a page first. Спочатку створіть сторінку. + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No View of a Part in selection. @@ -2906,8 +2906,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Некоректний вибір @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Task In Progress - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Task In Progress + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Close active task dialog and try again. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Wrong Selection - + Can not attach leader. No base View selected. Can not attach leader. No base View selected. - - - - + + + + You must select a base View for the line. You must select a base View for the line. - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. No base View in Selection. - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected Nothing selected - + At least 1 object in selection is not a part view At least 1 object in selection is not a part view - + Unknown object type in selection Unknown object type in selection - + No View in Selection. No View in Selection. - + You must select a View and/or lines. You must select a View and/or lines. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Ви впевнені, що бажаєте продовжити? @@ -3459,9 +3469,9 @@ Rich text creator + - Rich text editor Rich text editor @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Редагувати %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Метод - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. Не можна видалити цей вид, оскільки він має один або більше залежних видів, що будуть зламані. - + + + + - - - - - + + Object dependencies Залежності обʼєктів @@ -7404,6 +7412,8 @@ You can pick further points to get line segments. + + Top Згори @@ -7414,6 +7424,8 @@ You can pick further points to get line segments. + + Left Ліворуч @@ -7424,11 +7436,14 @@ You can pick further points to get line segments. + + Right Направо + Rear Ззаду @@ -7439,6 +7454,8 @@ You can pick further points to get line segments. + + Bottom Знизу @@ -7489,6 +7506,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Фронтальний + TechDrawGui::TaskProjection @@ -7899,7 +7945,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8093,7 +8139,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Adds a Centerline between 2 Lines @@ -8101,7 +8147,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Adds a Centerline between 2 Points @@ -8117,7 +8163,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8138,7 +8184,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8154,7 +8200,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8162,7 +8208,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8945,12 +8991,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw ТехМалюнок - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index 085524e1f1..e8ec05b31d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points Afig una línia central entre 2 punts @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices Afig vèrtex de punt central @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices Afig vèrtexs de quadrant @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Lines Afig una línia central entre 2 línies @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw TechDraw - + Add Centerline between 2 Points Afig una línia central entre 2 punts @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw TechDraw - + Add Cosmetic Line Through 2 Points Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation Insereix Anotació @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw TechDraw - + Insert Center Line Insereix una línia central - + Add Centerline to Faces Afig una línia central les cares @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw TechDraw - + Remove Cosmetic Object Elimina un objecte cosmètic @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw TechDraw - + Add Cosmetic Vertex Afig un vèrtex cosmètic @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw TechDraw - + Insert Cosmetic Vertex Insereix un vèrtex cosmètic - + Add Cosmetic Vertex Afig un vèrtex cosmètic @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw TechDraw - + Change Appearance of Lines Canvia l'aparença de les línies - + Change Appearance of selected Lines Change Appearance of selected Lines @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces Afig una línia central les cares @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View Afig un línia guia a la vista @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices Afig vèrtex de punt central @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices Afig vèrtexs de quadrant @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation Insereix una anotació de text enriquit @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges Mostra/amaga les arestes invisibles @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline Afig la informació de soldadura a la línia guia @@ -1996,23 +1996,23 @@ Create spreadsheet view - + Save page to dxf Save page to dxf - + Add Midpoint Vertices Afig vèrtex de punt central - + Add Quadrant Vertices Afig vèrtexs de quadrant - + Create Annotation Create Annotation @@ -2058,7 +2058,7 @@ Drag Dimension - + Create Balloon Create Balloon @@ -2073,8 +2073,8 @@ Create CenterLine - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols Surface Finish Symbols @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection Selecció incorrecta @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection Selecció incorrecta - + Select an object first Seleccioneu primer un objecte - + Too many objects selected Massa objectes seleccionats - + Create a page first. Creeu una pàgina primer + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. No hi ha cap vista d'una peça en la selecció. @@ -2906,8 +2906,6 @@ L'aresta seleccionada és una BSpline. El radi serà aproximat. Voleu continuar? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection Selecció incorrecta @@ -3058,56 +3058,9 @@ Seleccioneu 2 objectes punt i una vista. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - Tasca en procés - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + Tasca en procés + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. Tanca el quadre de diàleg de tasques actiu i intenta-ho altra vegada. - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection Selecció incorrecta - + Can not attach leader. No base View selected. No es pot adjuntar la guia. No s'ha seleccionat cap vista de base. - - - - + + + + You must select a base View for the line. Heu de seleccionar una vista de base per a la línia. - - + + No DrawViewPart objects in this selection No hi ha cap objecte DrawViewPart en aquesta selecció - - + + No base View in Selection. No hi ha cap Vista de base en la selecció. - + You must select Faces or an existing CenterLine. Heu de seleccionar cares o una línia central existent. - + No CenterLine in selection. No hi ha cap línia central en la selecció. - - - + + + Selection is not a CenterLine. La selecció no és una línia central. - + Selection not understood. No s'ha entés la selecció. - + You must select 2 Vertexes or an existing CenterLine. Heu de seleccionar 2 vèrtex o una línia central existent. - + Need 2 Vertices or 1 CenterLine. Es necessiten 2 vèrtexs o 1 línia central. - - + + Selection is empty. Selection is empty. - + Not enough points in selection. Not enough points in selection. - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. You must select 2 Vertexes. - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected No s'ha seleccionat res - + At least 1 object in selection is not a part view Com a mínim 1 objecte eln la selecció no és una vista de peça - + Unknown object type in selection Tipus d'objecte desconegut en la selecció - + No View in Selection. No hi ha cap vista en la selecció. - + You must select a View and/or lines. Heu de seleccionar una vista i/o línies. - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection No hi ha cap vista de peça en la selecció. - + Select exactly one Leader line or one Weld symbol. Seleccioneu exactament una única línia guia o un únic símbol de soldadura. - - + + SurfaceFinishSymbols SurfaceFinishSymbols - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? Are you sure you want to continue? @@ -3459,9 +3469,9 @@ Creador de text enriquit + - Rich text editor Editor de text enriquit @@ -3579,8 +3589,8 @@ Edit Detail View - + Edit %1 Edita %1 @@ -3699,14 +3709,12 @@ No subelements selected - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method Mètode - + Addition Addition - + Average roughness Average roughness - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + You cannot delete this view because it has one or more dependent views that would become broken. You cannot delete this view because it has one or more dependent views that would become broken. - + + + + - - - - - + + Object dependencies Dependències de l'objecte @@ -7395,6 +7403,8 @@ You can pick further points to get line segments. + + Top Planta @@ -7405,6 +7415,8 @@ You can pick further points to get line segments. + + Left Esquerra @@ -7415,11 +7427,14 @@ You can pick further points to get line segments. + + Right Dreta + Rear Posterior @@ -7430,6 +7445,8 @@ You can pick further points to get line segments. + + Bottom Inferior @@ -7480,6 +7497,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + Alçat + TechDrawGui::TaskProjection @@ -7890,7 +7936,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols Surface Finish Symbols @@ -8084,7 +8130,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines Afig una línia central entre 2 línies @@ -8092,7 +8138,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points Afig una línia central entre 2 punts @@ -8108,7 +8154,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Insereix un vèrtex cosmètic en una vista @@ -8129,7 +8175,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Afig una línia central a una cara @@ -8145,7 +8191,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Insereix un vèrtex cosmètic en el punt central de les arestes seleccionades @@ -8153,7 +8199,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Insereix un vèrtex cosmètic en els punts quadrants dels cercles seleccionats @@ -8936,12 +8982,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index 97f309562b..7a99fcea58 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 在 2 点之间添加中心线 @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices 添加中点 @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices 添加象限顶点 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw 工程图 - + Add Centerline between 2 Lines 在两条线之间添加中心线 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw 工程图 - + Add Centerline between 2 Points 在 2 点之间添加中心线 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw 工程图 - + Add Cosmetic Line Through 2 Points 通过 2 点添加修饰线 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw 工程图 - + Insert Annotation 插入批注 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw 工程图 - + Insert Center Line 插入中心线 - + Add Centerline to Faces 从面取中心线 @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw 工程图 - + Remove Cosmetic Object 移除饰性对象 @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw 工程图 - + Add Cosmetic Vertex 添加饰品顶点 @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw 工程图 - + Insert Cosmetic Vertex 插入饰品顶点 - + Add Cosmetic Vertex 添加饰品顶点 @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw 工程图 - + Change Appearance of Lines 更改线的外观 - + Change Appearance of selected Lines 更改所选线条外观 @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw 工程图 - + Add Centerline to Faces 从面取中心线 @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw 工程图 - + Add Leaderline to View 添加引导线到视图 @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw 工程图 - + Add Midpoint Vertices 添加中点 @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw 工程图 - + Add Quadrant Vertices 添加象限顶点 @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw 工程图 - + Insert Rich Text Annotation 插入富文本批注 @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw 工程图 - + Show/Hide Invisible Edges 显示/隐藏不可见边缘 @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw 工程图 - + Create a Surface Finish Symbol Create a Surface Finish Symbol - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw 工程图 - + Add Welding Information to Leaderline 向指引线添加焊接信息 @@ -1996,23 +1996,23 @@ 创建电子表格视图 - + Save page to dxf 保存页面到 dxf - + Add Midpoint Vertices 添加中点 - + Add Quadrant Vertices 添加象限顶点 - + Create Annotation 创建批注 @@ -2058,7 +2058,7 @@ 拖动尺寸 - + Create Balloon 创建气球 @@ -2073,8 +2073,8 @@ 创建中心线 - + Create Cosmetic Line Create Cosmetic Line @@ -2415,7 +2415,7 @@ Customize Format - + Surface Finish Symbols 表面粗糙度符号 @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection 选择错误 @@ -2744,9 +2744,10 @@ No profile object found in selection - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection 选择错误 - + Select an object first 首先选择对象 - + Too many objects selected 选择的对象过多 - + Create a page first. 首先创建一个页面。 + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. 没有选择中零件的视图。 @@ -2906,8 +2906,6 @@ 所选边是贝赛尔曲线。 半径将是近似值。继续？ - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection 选择错误 @@ -3058,56 +3058,9 @@ Select 2 point objects and 1 View. (2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - 任务正在进行 - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + 任务正在进行 + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. 关闭活动任务对话框并重试。 - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection 错误选择。 - + Can not attach leader. No base View selected. 无法附加指引线。没有选择基础视图。 - - - - + + + + You must select a base View for the line. 您必须为该线选择一个基视图。 - - + + No DrawViewPart objects in this selection No DrawViewPart objects in this selection - - + + No base View in Selection. 在选择中没有基本视图。 - + You must select Faces or an existing CenterLine. You must select Faces or an existing CenterLine. - + No CenterLine in selection. No CenterLine in selection. - - - + + + Selection is not a CenterLine. Selection is not a CenterLine. - + Selection not understood. Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. Need 2 Vertices or 1 CenterLine. - - + + Selection is empty. 没有选择对象。 - + Not enough points in selection. 没有选择足够的点。 - + Selection is not a Cosmetic Line. Selection is not a Cosmetic Line. - + You must select 2 Vertexes. 你必须选择两个交点。 - + You must select a base View for the circle. You must select a base View for the circle. - + Please select a center for the circle. Please select a center for the circle. - - + + Nothing selected 未选择任何内容 - + At least 1 object in selection is not a part view 至少一个所选对象不是零件视图 - + Unknown object type in selection 选择了未知的对象类型 - + No View in Selection. 选择中没有视图。 - + You must select a View and/or lines. 您必须选择一个视图（或多个线条）。 - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. 选区不是一个装饰性圆圈或一个装饰性圆弧。 - + No Part Views in this selection 选择中没有部件视图。 - + Select exactly one Leader line or one Weld symbol. Select exactly one Leader line or one Weld symbol. - - + + SurfaceFinishSymbols 表面粗糙度符号 - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection No Part View in Selection - + No %1 in Selection No %1 in Selection @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? 您确定要继续吗？ @@ -3459,9 +3469,9 @@ 富文本生成器 + - Rich text editor 富文本编辑器 @@ -3579,8 +3589,8 @@ 编辑局部视图 - + Edit %1 编辑 %1 @@ -3699,14 +3709,12 @@ 未选择子元素 - Selection is empty Selection is empty - No object selected @@ -3748,12 +3756,12 @@ Select 2 Vertexes or 1 Edge - + Please select a Line Group Please select a Line Group - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 Edit Face Hatch - + Method 方法 - + Addition Addition - + Average roughness 平均粗糙度 - + Roughness sampling length Roughness sampling length - + Lay symbol Lay symbol - + Minimum roughness grade number Minimum roughness grade number - + Maximum roughness grade number Maximum roughness grade number @@ -3853,28 +3861,28 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. 指引线 - + You cannot delete this view because it has one or more dependent views that would become broken. 您不能删除此视图，因为它有一个或多个依赖的视图会被损坏。 - + + + + - - - - - + + Object dependencies 对象依赖关系 @@ -7403,6 +7411,8 @@ You can pick further points to get line segments. + + Top 俯视 @@ -7413,6 +7423,8 @@ You can pick further points to get line segments. + + Left 左视 @@ -7423,11 +7435,14 @@ You can pick further points to get line segments. + + Right 右视 + Rear 后视 @@ -7438,6 +7453,8 @@ You can pick further points to get line segments. + + Bottom 底视 @@ -7488,6 +7505,35 @@ using the given X/Y Spacing Vertical space between border of projections Vertical space between border of projections + + + + FrontTopLeft + FrontTopLeft + + + + + FrontBottomRight + FrontBottomRight + + + + + FrontTopRight + FrontTopRight + + + + + FrontBottomLeft + FrontBottomLeft + + + + Front + 前视 + TechDrawGui::TaskProjection @@ -7898,7 +7944,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols 表面粗糙度符号 @@ -8092,7 +8138,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 在两线之间添加中心线 @@ -8100,7 +8146,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 在 2 点之间添加中心线 @@ -8116,7 +8162,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View Inserts a Cosmetic Vertex into a View @@ -8137,7 +8183,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces Adds a Centerline to Faces @@ -8153,7 +8199,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges Inserts Cosmetic Vertices at Midpoint of selected Edges @@ -8161,7 +8207,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles Inserts Cosmetic Vertices at Quadrant Points of selected Circles @@ -8944,12 +8990,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw 工程图 - + Add Cosmetic Circle Add Cosmetic Circle diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index 7e290482e5..1ce1620696 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines 在兩條線中加入中心線 @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points 加入中心線在兩點間 @@ -20,7 +20,7 @@ CmdMidpoints - + Add Midpoint Vertices 加入頂點的中心點 @@ -28,7 +28,7 @@ CmdQuadrants - + Add Quadrant Vertices 增加象限頂點 @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw 工程製圖 - + Add Centerline between 2 Lines 在兩條線中加入中心線 @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw 工程製圖 - + Add Centerline between 2 Points 加入中心線在兩點間 @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw 工程製圖 - + Add Cosmetic Line Through 2 Points 通過 2 點添加裝飾線 @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw TechDraw - + Insert Annotation 插入註釋 @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw 工程製圖 - + Insert Center Line 插入中央線 - + Add Centerline to Faces 添加中心線至面 @@ -233,12 +233,12 @@ CmdTechDrawCosmeticEraser - + TechDraw 工程製圖 - + Remove Cosmetic Object 移除裝飾物件 @@ -246,12 +246,12 @@ CmdTechDrawCosmeticVertex - + TechDraw 工程製圖 - + Add Cosmetic Vertex 添加裝飾頂點 @@ -259,17 +259,17 @@ CmdTechDrawCosmeticVertexGroup - + TechDraw 工程製圖 - + Insert Cosmetic Vertex 插入裝飾頂點 - + Add Cosmetic Vertex 添加裝飾頂點 @@ -277,17 +277,17 @@ CmdTechDrawDecorateLine - + TechDraw 工程製圖 - + Change Appearance of Lines 改變線之外觀 - + Change Appearance of selected Lines 更改選取線條的外觀 @@ -1395,12 +1395,12 @@ CmdTechDrawFaceCenterLine - + TechDraw TechDraw - + Add Centerline to Faces 添加中心線至面 @@ -1502,12 +1502,12 @@ CmdTechDrawLeaderLine - + TechDraw TechDraw - + Add Leaderline to View 加入指線至視圖 @@ -1541,12 +1541,12 @@ CmdTechDrawMidpoints - + TechDraw TechDraw - + Add Midpoint Vertices 加入頂點的中心點 @@ -1634,12 +1634,12 @@ CmdTechDrawQuadrants - + TechDraw TechDraw - + Add Quadrant Vertices 增加象限頂點 @@ -1673,12 +1673,12 @@ CmdTechDrawRichTextAnnotation - + TechDraw TechDraw - + Insert Rich Text Annotation 插入富文字註解 @@ -1722,12 +1722,12 @@ CmdTechDrawShowAll - + TechDraw TechDraw - + Show/Hide Invisible Edges 顯示/隱藏不可視的邊 @@ -1838,17 +1838,17 @@ CmdTechDrawSurfaceFinishSymbols - + TechDraw TechDraw - + Create a Surface Finish Symbol 建立一個表面紋理符號 - + Select a view<br> - click this button<br> - select surface finish symbol attributes in opened panel 選擇一個視圖<br> - 點擊此按鍵<br> -在開啟面板中選擇選擇表面粗糙度符號屬性 @@ -1932,12 +1932,12 @@ CmdTechDrawWeldSymbol - + TechDraw TechDraw - + Add Welding Information to Leaderline 加入銲接資訊到指線 @@ -1996,23 +1996,23 @@ 建立試算表視圖 - + Save page to dxf 儲存頁面為 DXF 格式 - + Add Midpoint Vertices 加入頂點的中心點 - + Add Quadrant Vertices 增加象限頂點 - + Create Annotation 建立註解 @@ -2058,7 +2058,7 @@ 拖曳標註 - + Create Balloon 建立件號圓圈 @@ -2073,8 +2073,8 @@ 建立中心線 - + Create Cosmetic Line 建立裝飾線 @@ -2415,7 +2415,7 @@ 自訂格式 - + Surface Finish Symbols 表面紋理符號 @@ -2686,16 +2686,6 @@ QObject - - - - - - - - - - @@ -2713,6 +2703,16 @@ + + + + + + + + + + Wrong selection 錯誤的選取 @@ -2744,9 +2744,10 @@ 在選擇中找不到輪廓物件 - - - + + + + @@ -2758,34 +2759,34 @@ - - - - + + + Incorrect selection 不正確的選取 - + Select an object first 請先選一個物件 - + Too many objects selected 太多物件被選擇 - + Create a page first. 請先建立一個頁面 + @@ -2794,7 +2795,6 @@ - No View of a Part in selection. 選擇中的零件沒有視圖。 @@ -2906,8 +2906,6 @@ 選取邊為 B 雲形線。半徑將會是近似值。是否繼續 ? - - @@ -2927,10 +2925,12 @@ + + + - Incorrect Selection 不正確的選取 @@ -3058,56 +3058,9 @@ 選擇 2 點物件以及 1 個視圖。(2) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Task In Progress - 任務進行中 - - @@ -3124,6 +3077,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Task In Progress + 任務進行中 + + + + + + + + + + + + + + + + + + + + + @@ -3134,11 +3137,6 @@ - - - - - @@ -3146,190 +3144,202 @@ - - - + + + + + Close active task dialog and try again. 關閉活動任務對話框並重試。 - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong Selection 錯誤的選擇 - + Can not attach leader. No base View selected. 無法附加指線。未選擇基本視圖。 - - - - + + + + You must select a base View for the line. 您必須給那條線選擇一個基礎視圖。 - - + + No DrawViewPart objects in this selection 此選擇中沒有 DrawViewPart 物件 - - + + No base View in Selection. 選擇中沒有基礎視圖。 - + You must select Faces or an existing CenterLine. 您必須選取面或現有的中心線。 - + No CenterLine in selection. 選擇中沒有中心線。 - - - + + + Selection is not a CenterLine. 選擇並非中心線 - + Selection not understood. 不了解選取什麼。 - + You must select 2 Vertexes or an existing CenterLine. 您必須選取 2 個點或現有的中心線。 - + Need 2 Vertices or 1 CenterLine. 需要 2 個點或 1 條中心線。 - - + + Selection is empty. 選擇為空。 - + Not enough points in selection. 沒有足夠的點被選取。 - + Selection is not a Cosmetic Line. 選擇並非裝飾線 - + You must select 2 Vertexes. 您必須選擇2個點。 - + You must select a base View for the circle. 您必須給那個圓選擇一個基礎視圖。 - + Please select a center for the circle. 請選擇圓的中心。 - - + + Nothing selected 沒有選取項目 - + At least 1 object in selection is not a part view 至少 1 個選取物件不是零件視圖 - + Unknown object type in selection 未知的物件類型在選擇中 - + No View in Selection. 選擇中沒有視圖 - + You must select a View and/or lines. 您必須選擇一個視圖與/或線 - + Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. Selection is not a Cosmetic Circle or a Cosmetic Arc of Circle. - + No Part Views in this selection 此選擇中沒有零件視圖 - + Select exactly one Leader line or one Weld symbol. 選擇正好一個指線或一個銲接符號。 - - + + SurfaceFinishSymbols 表面紋理符號 - + + No page to insert the symbol! + No page to insert the symbol! + + + + Selected object is not a part view, nor a leader line + Selected object is not a part view, nor a leader line + + + No Part View in Selection 選擇中沒有零件視圖 - + No %1 in Selection 選擇中沒有 %1 @@ -3423,8 +3433,8 @@ - + Are you sure you want to continue? 您確定要繼續嗎? @@ -3459,9 +3469,9 @@ 富文字產生器 + - Rich text editor 富文字編輯器 @@ -3579,8 +3589,8 @@ 編輯詳細視圖 - + Edit %1 編輯 %1 @@ -3699,14 +3709,12 @@ 沒有子元件集被選擇 - Selection is empty 選擇為空。 - No object selected @@ -3748,12 +3756,12 @@ 選擇二個點或一條邊 - + Please select a Line Group 請選擇一個線群組 - + %1 defines these line widths: thin: %2 graphic: %3 @@ -3774,37 +3782,37 @@ thick: %4 編輯面填充 - + Method 方法 - + Addition 加法 - + Average roughness 平均粗糙度 - + Roughness sampling length 粗糙度取樣長度 - + Lay symbol 鋪設符號 - + Minimum roughness grade number 最小粗糙度等級數 - + Maximum roughness grade number 最大粗糙度等級數 @@ -3853,29 +3861,29 @@ thick: %4 Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. 您不能刪除此指線因為 它有銲接符號會損壞。 - + You cannot delete this view because it has one or more dependent views that would become broken. 您無法刪除此視圖，因為它具有一個或多個相依視圖，刪除將導致這些相依視圖損壞。 - + + + + - - - - - + + Object dependencies 物件相依 @@ -7395,6 +7403,8 @@ You can pick further points to get line segments. + + Top 上視圖 @@ -7405,6 +7415,8 @@ You can pick further points to get line segments. + + Left 左視圖 @@ -7415,11 +7427,14 @@ You can pick further points to get line segments. + + Right 右視圖 + Rear 後視圖 @@ -7430,6 +7445,8 @@ You can pick further points to get line segments. + + Bottom 底視圖 @@ -7479,6 +7496,35 @@ using the given X/Y Spacing Vertical space between border of projections 投影邊界之間的垂直空間 + + + + FrontTopLeft + 前上左 + + + + + FrontBottomRight + 前底右 + + + + + FrontTopRight + 前上右 + + + + + FrontBottomLeft + 前底左 + + + + Front + 前視圖 + TechDrawGui::TaskProjection @@ -7889,7 +7935,7 @@ using the given X/Y Spacing TechDrawGui::TaskSurfaceFinishSymbols - + Surface Finish Symbols 表面紋理符號 @@ -8083,7 +8129,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines 在兩條線中加入中心線 @@ -8091,7 +8137,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points 在兩點間加入中心線 @@ -8107,7 +8153,7 @@ using the given X/Y Spacing TechDraw_CosmeticVertex - + Inserts a Cosmetic Vertex into a View 在視圖中插入裝飾頂點 @@ -8128,7 +8174,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces 添加中心線至面 @@ -8144,7 +8190,7 @@ using the given X/Y Spacing TechDraw_Midpoints - + Inserts Cosmetic Vertices at Midpoint of selected Edges 在選擇邊之中點處插入裝飾頂點 @@ -8152,7 +8198,7 @@ using the given X/Y Spacing TechDraw_Quadrants - + Inserts Cosmetic Vertices at Quadrant Points of selected Circles 在選擇圓之象限點處插入裝飾頂點 @@ -8935,12 +8981,12 @@ there is an open task dialog. CmdTechDrawCosmeticCircle - + TechDraw TechDraw - + Add Cosmetic Circle 添加裝飾圓 diff --git a/src/Mod/Tux/Resources/translations/Tux.ts b/src/Mod/Tux/Resources/translations/Tux.ts index 445c15e423..058bbecbee 100644 --- a/src/Mod/Tux/Resources/translations/Tux.ts +++ b/src/Mod/Tux/Resources/translations/Tux.ts @@ -59,42 +59,42 @@ - + Settings - + Orbit style - + Compact - + Tooltip - + Turntable - + Free Turntable - + Trackball - + Undefined diff --git a/src/Mod/Tux/Resources/translations/Tux_be.ts b/src/Mod/Tux/Resources/translations/Tux_be.ts index 663dedded8..20c5cfef1e 100644 --- a/src/Mod/Tux/Resources/translations/Tux_be.ts +++ b/src/Mod/Tux/Resources/translations/Tux_be.ts @@ -59,42 +59,42 @@ Стыль навігацыі не распазнаны. - + Settings Налады - + Orbit style Стыль арбіты - + Compact Сціслы - + Tooltip Парада - + Turntable Паваротны круг - + Free Turntable Свабодны паваротны круг - + Trackball Трэкбол - + Undefined Не вызначана diff --git a/src/Mod/Tux/Resources/translations/Tux_ca.ts b/src/Mod/Tux/Resources/translations/Tux_ca.ts index 469d40e92a..b5e317c144 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ca.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ca.ts @@ -59,42 +59,42 @@ Estil de navegació no reconegut. - + Settings Paràmetres - + Orbit style Estil d'òrbita - + Compact Compacte - + Tooltip Consell - + Turntable Torn - + Free Turntable Plataforma giratòria lliure - + Trackball Ratolí de bola - + Undefined Indefinit diff --git a/src/Mod/Tux/Resources/translations/Tux_cs.ts b/src/Mod/Tux/Resources/translations/Tux_cs.ts index 87d8bd24b8..e4b4c61748 100644 --- a/src/Mod/Tux/Resources/translations/Tux_cs.ts +++ b/src/Mod/Tux/Resources/translations/Tux_cs.ts @@ -59,42 +59,42 @@ Navigační styl nebyl rozeznán. - + Settings Nastavení - + Orbit style Styl orbitu - + Compact Kompaktní - + Tooltip Popisek nástroje - + Turntable Otočný stůl - + Free Turntable Volný otočný stůl - + Trackball Trackball - + Undefined Nedefinovaná diff --git a/src/Mod/Tux/Resources/translations/Tux_de.ts b/src/Mod/Tux/Resources/translations/Tux_de.ts index 1d3466a5a4..0fdd402690 100644 --- a/src/Mod/Tux/Resources/translations/Tux_de.ts +++ b/src/Mod/Tux/Resources/translations/Tux_de.ts @@ -59,42 +59,42 @@ Navigationsstil nicht erkannt. - + Settings Einstellungen - + Orbit style Orbit-Stil - + Compact Kompakt - + Tooltip Quick-Info - + Turntable Drehscheibe - + Free Turntable Freie Drehscheibe - + Trackball Steuerkugel - + Undefined Unbestimmt diff --git a/src/Mod/Tux/Resources/translations/Tux_el.ts b/src/Mod/Tux/Resources/translations/Tux_el.ts index 36729c3c3e..951ebf192f 100644 --- a/src/Mod/Tux/Resources/translations/Tux_el.ts +++ b/src/Mod/Tux/Resources/translations/Tux_el.ts @@ -59,42 +59,42 @@ Ο τύπος πλοήγησης δεν αναγνωρίζεται. - + Settings Ρυθμίσεις - + Orbit style Τύπος μορφοποίησης τροχιάς - + Compact Συμπαγής - + Tooltip Επεξήγηση εργαλείου - + Turntable Περιστρεφόμενη βάση - + Free Turntable Ελεύθερη Περιστροφική πλάκα - + Trackball Ιχνόσφαιρα - + Undefined Απροσδιόριστο diff --git a/src/Mod/Tux/Resources/translations/Tux_es-AR.ts b/src/Mod/Tux/Resources/translations/Tux_es-AR.ts index 24d2fbb0ae..16bde8e252 100644 --- a/src/Mod/Tux/Resources/translations/Tux_es-AR.ts +++ b/src/Mod/Tux/Resources/translations/Tux_es-AR.ts @@ -59,42 +59,42 @@ Estilo de navegación no reconocido. - + Settings Configuración - + Orbit style Estilo de órbita - + Compact Compactar - + Tooltip Descripción - + Turntable Mesa giratoria - + Free Turntable Turntable libre - + Trackball Trackball - + Undefined Indefinido diff --git a/src/Mod/Tux/Resources/translations/Tux_es-ES.ts b/src/Mod/Tux/Resources/translations/Tux_es-ES.ts index 58cb877aff..25f2896eb0 100644 --- a/src/Mod/Tux/Resources/translations/Tux_es-ES.ts +++ b/src/Mod/Tux/Resources/translations/Tux_es-ES.ts @@ -59,42 +59,42 @@ Estilo de navegación no reconocido. - + Settings Opciones - + Orbit style Estilo órbita - + Compact Compacto - + Tooltip Información sobre herramientas - + Turntable Mesa giratoria - + Free Turntable Turntable libre - + Trackball Trackball - + Undefined Indefinido diff --git a/src/Mod/Tux/Resources/translations/Tux_eu.ts b/src/Mod/Tux/Resources/translations/Tux_eu.ts index 9e411a2043..5d4583f93c 100644 --- a/src/Mod/Tux/Resources/translations/Tux_eu.ts +++ b/src/Mod/Tux/Resources/translations/Tux_eu.ts @@ -59,42 +59,42 @@ Nabigazio-estiloa ez da onartzen. - + Settings Ezarpenak - + Orbit style Orbita-estiloa - + Compact Trinkoa - + Tooltip Argibidea - + Turntable Tornua - + Free Turntable Tornu librea - + Trackball Trackball - + Undefined Definitu gabea diff --git a/src/Mod/Tux/Resources/translations/Tux_fi.ts b/src/Mod/Tux/Resources/translations/Tux_fi.ts index 4641fc3e4f..fa7228d449 100644 --- a/src/Mod/Tux/Resources/translations/Tux_fi.ts +++ b/src/Mod/Tux/Resources/translations/Tux_fi.ts @@ -59,42 +59,42 @@ Navigointityyliä ei tunnistettu. - + Settings Asetukset - + Orbit style Kiertoradan tyyli - + Compact Tiivis - + Tooltip Vihje - + Turntable Pyörähdyspöytä - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Määrittelemätön diff --git a/src/Mod/Tux/Resources/translations/Tux_fr.ts b/src/Mod/Tux/Resources/translations/Tux_fr.ts index 565f2331c9..159cfe7e91 100644 --- a/src/Mod/Tux/Resources/translations/Tux_fr.ts +++ b/src/Mod/Tux/Resources/translations/Tux_fr.ts @@ -59,42 +59,42 @@ Style de navigation non reconnu. - + Settings Paramètres - + Orbit style Style d'orbite - + Compact Compact - + Tooltip Infobulle - + Turntable Vue en rotation - + Free Turntable Vue en rotation libre - + Trackball Trackball - + Undefined Non défini diff --git a/src/Mod/Tux/Resources/translations/Tux_gl.ts b/src/Mod/Tux/Resources/translations/Tux_gl.ts index 03c3999988..40ff99a0b5 100644 --- a/src/Mod/Tux/Resources/translations/Tux_gl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_gl.ts @@ -59,42 +59,42 @@ Estilo de navegación non recoñecido. - + Settings Axustes - + Orbit style Estilo orbital - + Compact Compacto - + Tooltip Suxestión - + Turntable Plataforma xiratoria - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Indeterminado diff --git a/src/Mod/Tux/Resources/translations/Tux_hr.ts b/src/Mod/Tux/Resources/translations/Tux_hr.ts index d141a51853..72d93e1b18 100644 --- a/src/Mod/Tux/Resources/translations/Tux_hr.ts +++ b/src/Mod/Tux/Resources/translations/Tux_hr.ts @@ -59,42 +59,42 @@ Stil navigacije nije prepoznat. - + Settings Postavke - + Orbit style Način okretanja - + Compact Kompaktan - + Tooltip Naziv alata - + Turntable Okretano - + Free Turntable Slobodna okretna ploča - + Trackball Prećeno - + Undefined Nedefinirano diff --git a/src/Mod/Tux/Resources/translations/Tux_hu.ts b/src/Mod/Tux/Resources/translations/Tux_hu.ts index 88a16fa799..be73068dc6 100644 --- a/src/Mod/Tux/Resources/translations/Tux_hu.ts +++ b/src/Mod/Tux/Resources/translations/Tux_hu.ts @@ -59,42 +59,42 @@ Navigációs stílus nem felismerhető. - + Settings Beállítások - + Orbit style Orbit stílus - + Compact Tömörített - + Tooltip Buboréksúgó - + Turntable Fordítótábla - + Free Turntable Forgóasztal - + Trackball Trackball - + Undefined Nem definiált diff --git a/src/Mod/Tux/Resources/translations/Tux_id.ts b/src/Mod/Tux/Resources/translations/Tux_id.ts index 7e672521d0..c932e132ff 100644 --- a/src/Mod/Tux/Resources/translations/Tux_id.ts +++ b/src/Mod/Tux/Resources/translations/Tux_id.ts @@ -59,42 +59,42 @@ Gaya navigasi tidak dikenali. - + Settings Setelan - + Orbit style Gaya Orbit - + Compact Ringkas - + Tooltip Keterangan alat - + Turntable Turntable - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Tidak terdefinisi diff --git a/src/Mod/Tux/Resources/translations/Tux_it.ts b/src/Mod/Tux/Resources/translations/Tux_it.ts index b241f7767b..283fd2b2de 100644 --- a/src/Mod/Tux/Resources/translations/Tux_it.ts +++ b/src/Mod/Tux/Resources/translations/Tux_it.ts @@ -59,42 +59,42 @@ Stile di navigazione non valido. - + Settings Impostazioni - + Orbit style Stile orbita - + Compact Compatto - + Tooltip Suggerimento - + Turntable Piatto - + Free Turntable Piatto Libero - + Trackball Trackball - + Undefined Non definito diff --git a/src/Mod/Tux/Resources/translations/Tux_ja.ts b/src/Mod/Tux/Resources/translations/Tux_ja.ts index 531f2f82e7..93343e53b3 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ja.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ja.ts @@ -59,42 +59,42 @@ ナビゲーションスタイルが認識されません。 - + Settings 設定 - + Orbit style 軌道スタイル - + Compact コンパクト - + Tooltip ツールチップ - + Turntable ターンテーブル - + Free Turntable フリーターンテーブル - + Trackball トラックボール - + Undefined 未定義 diff --git a/src/Mod/Tux/Resources/translations/Tux_ka.ts b/src/Mod/Tux/Resources/translations/Tux_ka.ts index 820ac8907c..01d66ad3dd 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ka.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ka.ts @@ -59,42 +59,42 @@ ნავიგაციის უცნობი სტილი. - + Settings მორგება - + Orbit style ტრიალის სტილი - + Compact კომპაქტურად - + Tooltip მინიშნება - + Turntable გრუნტი - + Free Turntable თავისუფალი გრუნტი - + Trackball ტრეკბოლი - + Undefined განუსაზღვრელი diff --git a/src/Mod/Tux/Resources/translations/Tux_ko.ts b/src/Mod/Tux/Resources/translations/Tux_ko.ts index c716bf57aa..7232f2a36d 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ko.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ko.ts @@ -59,42 +59,42 @@ 탐색 스타일이 인식되지 않습니다. - + Settings Settings - + Orbit style 궤도 스타일 - + Compact 소형 - + Tooltip 툴팁 - + Turntable 턴테이블 - + Free Turntable Free Turntable - + Trackball 트랙볼 - + Undefined 정의되지 않음 diff --git a/src/Mod/Tux/Resources/translations/Tux_nl.ts b/src/Mod/Tux/Resources/translations/Tux_nl.ts index 1b464c07af..9c3bfcd12b 100644 --- a/src/Mod/Tux/Resources/translations/Tux_nl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_nl.ts @@ -59,42 +59,42 @@ Navigatie stijl is niet herkend. - + Settings Instellingen - + Orbit style Rotatiebaan stijl - + Compact Compact - + Tooltip Tooltip - + Turntable Draaitafel - + Free Turntable Vrije draaitafel - + Trackball Trackball - + Undefined niet gedefinieerd diff --git a/src/Mod/Tux/Resources/translations/Tux_pl.ts b/src/Mod/Tux/Resources/translations/Tux_pl.ts index a4c62e1016..e209557556 100644 --- a/src/Mod/Tux/Resources/translations/Tux_pl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_pl.ts @@ -59,42 +59,42 @@ Styl nawigacji nie jest rozpoznany. - + Settings Ustawienia - + Orbit style Technika orbitalna - + Compact Kompaktowy - + Tooltip Podpowiedź - + Turntable Turntable - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Niezdefiniowany diff --git a/src/Mod/Tux/Resources/translations/Tux_pt-BR.ts b/src/Mod/Tux/Resources/translations/Tux_pt-BR.ts index cdf9655664..a007b6517a 100644 --- a/src/Mod/Tux/Resources/translations/Tux_pt-BR.ts +++ b/src/Mod/Tux/Resources/translations/Tux_pt-BR.ts @@ -59,42 +59,42 @@ Estilo de navegação não reconhecido. - + Settings Configurações - + Orbit style Estilo de orbita - + Compact Compacto - + Tooltip Sugestão - + Turntable Plataforma - + Free Turntable Girarmesa Livre - + Trackball Trackball - + Undefined Indefinido diff --git a/src/Mod/Tux/Resources/translations/Tux_pt-PT.ts b/src/Mod/Tux/Resources/translations/Tux_pt-PT.ts index b5a5ba3ae3..2c18bf09b0 100644 --- a/src/Mod/Tux/Resources/translations/Tux_pt-PT.ts +++ b/src/Mod/Tux/Resources/translations/Tux_pt-PT.ts @@ -59,42 +59,42 @@ Estilo de navegação não reconhecido. - + Settings Ajustes - + Orbit style Estilo da Órbita - + Compact Compacto - + Tooltip Sugestão - + Turntable Plataforma giratória - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Indefinido diff --git a/src/Mod/Tux/Resources/translations/Tux_ro.ts b/src/Mod/Tux/Resources/translations/Tux_ro.ts index 8ca26bb23d..639ba5a8cf 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ro.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ro.ts @@ -59,42 +59,42 @@ Stil de navigare invalid. - + Settings Setari - + Orbit style Stil de rotație - + Compact Compactează - + Tooltip Sugestii - + Turntable Placa turnantă - + Free Turntable Gratuit de Turntable - + Trackball Trackball - + Undefined Nedefinit diff --git a/src/Mod/Tux/Resources/translations/Tux_ru.ts b/src/Mod/Tux/Resources/translations/Tux_ru.ts index 5da388e569..d84c58dd2e 100644 --- a/src/Mod/Tux/Resources/translations/Tux_ru.ts +++ b/src/Mod/Tux/Resources/translations/Tux_ru.ts @@ -59,42 +59,42 @@ Стиль навигации не распознан. - + Settings Настройки - + Orbit style Орбитальный стиль - + Compact Компактно - + Tooltip Подсказка - + Turntable Поворотный стол - + Free Turntable Свободный Поворотный стол - + Trackball Трекбол - + Undefined Не определено diff --git a/src/Mod/Tux/Resources/translations/Tux_sl.ts b/src/Mod/Tux/Resources/translations/Tux_sl.ts index c118acc933..e47d4f190a 100644 --- a/src/Mod/Tux/Resources/translations/Tux_sl.ts +++ b/src/Mod/Tux/Resources/translations/Tux_sl.ts @@ -59,42 +59,42 @@ Stil navigacije ni prepoznan. - + Settings Nastavitve - + Orbit style Slog vrtenja - + Compact Kompakten - + Tooltip Namig orodja - + Turntable Sukajoči pogled - + Free Turntable Prostosukajoča plošča - + Trackball Sledilna kroglica - + Undefined Nedoločeno diff --git a/src/Mod/Tux/Resources/translations/Tux_sr-CS.ts b/src/Mod/Tux/Resources/translations/Tux_sr-CS.ts index 7a5cd0b796..c3ae675ce4 100644 --- a/src/Mod/Tux/Resources/translations/Tux_sr-CS.ts +++ b/src/Mod/Tux/Resources/translations/Tux_sr-CS.ts @@ -59,42 +59,42 @@ Stil navigacije nije prepoznat. - + Settings Podešavanja - + Orbit style Način okretanja orbit - + Compact Zbijeno - + Tooltip Kratak opis alatke - + Turntable Gramofon - + Free Turntable Obični gramofon - + Trackball Trackball - + Undefined Nedefinisano diff --git a/src/Mod/Tux/Resources/translations/Tux_sr.ts b/src/Mod/Tux/Resources/translations/Tux_sr.ts index 5ce16069b0..4706b69a4d 100644 --- a/src/Mod/Tux/Resources/translations/Tux_sr.ts +++ b/src/Mod/Tux/Resources/translations/Tux_sr.ts @@ -59,42 +59,42 @@ Стил навигације није препознат. - + Settings Подешавања - + Orbit style Начин окретања орбит - + Compact Збијено - + Tooltip Кратак опис алатке - + Turntable Грамофон - + Free Turntable Обични грамофон - + Trackball Trackball - + Undefined Недефинисано diff --git a/src/Mod/Tux/Resources/translations/Tux_sv-SE.ts b/src/Mod/Tux/Resources/translations/Tux_sv-SE.ts index ee890c3aa3..62abbacee4 100644 --- a/src/Mod/Tux/Resources/translations/Tux_sv-SE.ts +++ b/src/Mod/Tux/Resources/translations/Tux_sv-SE.ts @@ -59,42 +59,42 @@ Navigationsstilen känns inte igen. - + Settings Inställningar - + Orbit style Orbit stil - + Compact Kompakt - + Tooltip Verktygstips - + Turntable Skivtallrik - + Free Turntable Free Turntable - + Trackball Trackball - + Undefined Odefinierad diff --git a/src/Mod/Tux/Resources/translations/Tux_tr.ts b/src/Mod/Tux/Resources/translations/Tux_tr.ts index 4e89256ac9..a50d651463 100644 --- a/src/Mod/Tux/Resources/translations/Tux_tr.ts +++ b/src/Mod/Tux/Resources/translations/Tux_tr.ts @@ -59,42 +59,42 @@ Gezinme stili tanınmıyor. - + Settings Ayarlar - + Orbit style Yörünge stili - + Compact Kompakt - + Tooltip Ipucu - + Turntable Döner tabla - + Free Turntable Döner Tabla - + Trackball Trackball - + Undefined Tanımlanmamış diff --git a/src/Mod/Tux/Resources/translations/Tux_uk.ts b/src/Mod/Tux/Resources/translations/Tux_uk.ts index fd870d3acc..f39fb02932 100644 --- a/src/Mod/Tux/Resources/translations/Tux_uk.ts +++ b/src/Mod/Tux/Resources/translations/Tux_uk.ts @@ -59,42 +59,42 @@ Стиль навігації не визначений. - + Settings Параметри - + Orbit style Стиль орбіти - + Compact Зменшити - + Tooltip Підказка - + Turntable Поворотна - + Free Turntable Free Turntable - + Trackball Трекбол - + Undefined Невизначено diff --git a/src/Mod/Tux/Resources/translations/Tux_val-ES.ts b/src/Mod/Tux/Resources/translations/Tux_val-ES.ts index ceb9c1c0bf..bf2114c4eb 100644 --- a/src/Mod/Tux/Resources/translations/Tux_val-ES.ts +++ b/src/Mod/Tux/Resources/translations/Tux_val-ES.ts @@ -59,42 +59,42 @@ No es reconeix l'estil de navegació. - + Settings Paràmetres - + Orbit style Estil d'òrbita - + Compact Compacte - + Tooltip Indicador de funció - + Turntable En rotació - + Free Turntable Free Turntable - + Trackball Ratolí de bola - + Undefined Sense definir diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts index b4c0aad0a9..4284c69eaa 100644 --- a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts +++ b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts @@ -59,42 +59,42 @@ 无法识别导航样式。 - + Settings 设置 - + Orbit style 环绕模式 - + Compact 压缩 - + Tooltip 工具提示 - + Turntable 转盘 - + Free Turntable 自由转盘 - + Trackball 轨迹球 - + Undefined 未定义 diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-TW.ts b/src/Mod/Tux/Resources/translations/Tux_zh-TW.ts index 7ba465b55d..c09e482ec4 100644 --- a/src/Mod/Tux/Resources/translations/Tux_zh-TW.ts +++ b/src/Mod/Tux/Resources/translations/Tux_zh-TW.ts @@ -59,42 +59,42 @@ 無法辨識導覽列樣式 - + Settings 設定 - + Orbit style 環繞模式 - + Compact 緊湊 - + Tooltip 工具提示 - + Turntable 旋轉台 - + Free Turntable 自由旋轉台 - + Trackball 軌跡球 - + Undefined 未定義 diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts index 58b1f1f1ad..5db28c6d77 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web.ts @@ -128,8 +128,8 @@ QObject - + Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_be.ts b/src/Mod/Web/Gui/Resources/translations/Web_be.ts index 82ab11d044..3924b77d62 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_be.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_be.ts @@ -128,8 +128,8 @@ QObject - + Browser Інтэрнэт-аглядальнік diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts index b5b86d0d05..e1c3d109d6 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts index d78b3ebbe3..daa7e61647 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts @@ -128,8 +128,8 @@ QObject - + Browser Prohlížeč diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.ts b/src/Mod/Web/Gui/Resources/translations/Web_de.ts index 0529ab541c..aee06d6c6d 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_de.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_de.ts @@ -128,8 +128,8 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_el.ts b/src/Mod/Web/Gui/Resources/translations/Web_el.ts index e200ca0f28..9f4a94968b 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_el.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_el.ts @@ -128,8 +128,8 @@ QObject - + Browser Περιηγητής diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts index c6a32d09fe..1c3433fab5 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts index e5dec37cf1..d4cc495b79 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts index 28ce388b31..48a1833ddf 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts @@ -128,8 +128,8 @@ QObject - + Browser Nabigatzailea diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts index 34c6b2ce77..8b42ec2adf 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts @@ -128,8 +128,8 @@ QObject - + Browser Selain diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts index 8157e70761..945fe808f0 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts @@ -128,8 +128,8 @@ QObject - + Browser Navigateur diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts index 777ce292e2..ceb637f3fe 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts index f245e7ef5f..7bcba60604 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts @@ -128,8 +128,8 @@ QObject - + Browser Preglednik diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts index 44869f2374..d2c3be118c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts @@ -128,8 +128,8 @@ QObject - + Browser Böngésző diff --git a/src/Mod/Web/Gui/Resources/translations/Web_id.ts b/src/Mod/Web/Gui/Resources/translations/Web_id.ts index fcfc97270c..64f2b5d860 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_id.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_id.ts @@ -128,8 +128,8 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.ts b/src/Mod/Web/Gui/Resources/translations/Web_it.ts index 0072f540cf..016831e757 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_it.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_it.ts @@ -128,8 +128,8 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts index 650761a319..10f51214d0 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts @@ -128,8 +128,8 @@ QObject - + Browser ブラウザー diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ka.ts b/src/Mod/Web/Gui/Resources/translations/Web_ka.ts index be594d8e88..a5df995454 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ka.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ka.ts @@ -128,8 +128,8 @@ QObject - + Browser ბრაუზერი diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ko.ts b/src/Mod/Web/Gui/Resources/translations/Web_ko.ts index bc2ad682af..2f094bc378 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ko.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ko.ts @@ -128,8 +128,8 @@ QObject - + Browser 브라우저 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts index cfd3895aab..8941b96383 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts @@ -128,8 +128,8 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts index 6fcfecff40..436291e431 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts @@ -128,8 +128,8 @@ QObject - + Browser Przeglądarka diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts index c45a49f3e8..86b4f4ec0e 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts index e6af894b77..a445cf27e2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts index 46d6d439e2..dd42f7b8f2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts @@ -128,8 +128,8 @@ QObject - + Browser Navigator diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts index d9d1f5ceea..9c3dffbd0f 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts @@ -128,8 +128,8 @@ QObject - + Browser Браузер diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts index be637cd3ce..c8f5d8bccc 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts @@ -128,8 +128,8 @@ QObject - + Browser Brskalnik diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr-CS.ts b/src/Mod/Web/Gui/Resources/translations/Web_sr-CS.ts index be3c924b9f..8fe97e203b 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sr-CS.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sr-CS.ts @@ -128,8 +128,8 @@ QObject - + Browser Pregledač diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr.ts b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts index a0fb839a65..1885148b84 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts @@ -128,8 +128,8 @@ QObject - + Browser Прегледач diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts index e8874a91b9..2b8fe0faef 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts @@ -128,8 +128,8 @@ QObject - + Browser Webbläsare diff --git a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts index 26bb2c8eca..0af13a276a 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts @@ -128,8 +128,8 @@ QObject - + Browser Tarayıcı diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts index a66a8e463b..59bafb03c8 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts @@ -128,8 +128,8 @@ QObject - + Browser Браузер diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts index e942bdc1a6..f70c453ce9 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts @@ -128,8 +128,8 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts index 9d16107582..bdbc7ab1d5 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts @@ -128,8 +128,8 @@ QObject - + Browser 浏览器 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts index 809b761be3..aa526b9d01 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts @@ -128,8 +128,8 @@ QObject - + Browser 瀏覽器