diff --git a/src/Mod/Fem/CMakeLists.txt b/src/Mod/Fem/CMakeLists.txt
index f9b1efc417..ddc634131d 100755
--- a/src/Mod/Fem/CMakeLists.txt
+++ b/src/Mod/Fem/CMakeLists.txt
@@ -42,11 +42,13 @@ SET(FemCommands_SRCS
 
 SET(FemExamples_SRCS
     femexamples/__init__.py
+    femexamples/boxanalysis_base.py
     femexamples/boxanalysis_static.py
     femexamples/boxanalysis_frequency.py
     femexamples/buckling_platebuckling.py
     femexamples/buckling_lateraltorsionalbuckling.py
     femexamples/ccx_buckling_flexuralbuckling.py
+    femexamples/ccx_cantilever_base.py
     femexamples/ccx_cantilever_faceload.py
     femexamples/ccx_cantilever_nodeload.py
     femexamples/ccx_cantilever_hexa20faceload.py
diff --git a/src/Mod/Fem/femexamples/boxanalysis_base.py b/src/Mod/Fem/femexamples/boxanalysis_base.py
new file mode 100644
index 0000000000..71d9e5d333
--- /dev/null
+++ b/src/Mod/Fem/femexamples/boxanalysis_base.py
@@ -0,0 +1,80 @@
+# ***************************************************************************
+# *   Copyright (c) 2019 Bernd Hahnebach <bernd@bimstatik.org>              *
+# *   Copyright (c) 2020 Sudhanshu Dubey <sudhanshu.thethunder@gmail.com    *
+# *                                                                         *
+# *   This file is part of the FreeCAD CAx development system.              *
+# *                                                                         *
+# *   This program is free software; you can redistribute it and/or modify  *
+# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
+# *   as published by the Free Software Foundation; either version 2 of     *
+# *   the License, or (at your option) any later version.                   *
+# *   for detail see the LICENCE text file.                                 *
+# *                                                                         *
+# *   This program is distributed in the hope that it will be useful,       *
+# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+# *   GNU Library General Public License for more details.                  *
+# *                                                                         *
+# *   You should have received a copy of the GNU Library General Public     *
+# *   License along with this program; if not, write to the Free Software   *
+# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
+# *   USA                                                                   *
+# *                                                                         *
+# ***************************************************************************
+
+import FreeCAD
+
+import Fem
+import ObjectsFem
+
+from .manager import get_meshname
+from .manager import init_doc
+
+
+def setup_boxanalysisbase(doc=None, solvertype="ccxtools"):
+
+    # init FreeCAD document
+    if doc is None:
+        doc = init_doc()
+
+    # geometric objects
+    # object name is important in this base setup method
+    # all module which use this base setup, use the object name to find the object
+    geom_obj = doc.addObject("Part::Box", "Box")
+    geom_obj.Height = geom_obj.Width = geom_obj.Length = 10
+    doc.recompute()
+
+    if FreeCAD.GuiUp:
+        geom_obj.ViewObject.Document.activeView().viewAxonometric()
+        geom_obj.ViewObject.Document.activeView().fitAll()
+
+    # analysis
+    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
+
+    # material
+    material_obj = ObjectsFem.makeMaterialSolid(doc, "MechanicalMaterial")
+    mat = material_obj.Material
+    mat["Name"] = "Steel-Generic"
+    mat["YoungsModulus"] = "200000 MPa"
+    mat["PoissonRatio"] = "0.30"
+    mat["Density"] = "7900 kg/m^3"
+    material_obj.Material = mat
+    analysis.addObject(material_obj)
+
+    # mesh
+    from .meshes.mesh_boxanalysis_tetra10 import create_nodes, create_elements
+    fem_mesh = Fem.FemMesh()
+    control = create_nodes(fem_mesh)
+    if not control:
+        FreeCAD.Console.PrintError("Error on creating nodes.\n")
+    control = create_elements(fem_mesh)
+    if not control:
+        FreeCAD.Console.PrintError("Error on creating elements.\n")
+    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
+    femmesh_obj.FemMesh = fem_mesh
+    femmesh_obj.Part = geom_obj
+    femmesh_obj.SecondOrderLinear = False
+    femmesh_obj.CharacteristicLengthMin = "8.0 mm"
+
+    doc.recompute()
+    return doc
diff --git a/src/Mod/Fem/femexamples/boxanalysis_frequency.py b/src/Mod/Fem/femexamples/boxanalysis_frequency.py
index 0170793fa4..e4bdbcccd6 100644
--- a/src/Mod/Fem/femexamples/boxanalysis_frequency.py
+++ b/src/Mod/Fem/femexamples/boxanalysis_frequency.py
@@ -29,11 +29,9 @@ setup()
 
 """
 
-# import FreeCAD
-
 import ObjectsFem
 
-from .boxanalysis_static import setup_base
+from .boxanalysis_base import setup_boxanalysisbase
 
 
 def get_information():
@@ -51,7 +49,7 @@ def get_information():
 def setup(doc=None, solvertype="ccxtools"):
 
     # setup box frequency, change solver attributes
-    doc = setup_base(doc, solvertype)
+    doc = setup_boxanalysisbase(doc, solvertype)
     analysis = doc.Analysis
 
     # solver
diff --git a/src/Mod/Fem/femexamples/boxanalysis_static.py b/src/Mod/Fem/femexamples/boxanalysis_static.py
index e4c5180bdf..df766ee3a6 100644
--- a/src/Mod/Fem/femexamples/boxanalysis_static.py
+++ b/src/Mod/Fem/femexamples/boxanalysis_static.py
@@ -31,11 +31,9 @@ setup()
 
 import FreeCAD
 
-import Fem
 import ObjectsFem
 
-from .manager import get_meshname
-from .manager import init_doc
+from .boxanalysis_base import setup_boxanalysisbase
 
 
 def get_information():
@@ -50,59 +48,10 @@ def get_information():
     }
 
 
-def setup_base(doc=None, solvertype="ccxtools"):
-
-    # init FreeCAD document
-    if doc is None:
-        doc = init_doc()
-
-    # geometric objects
-    # object name is important in this base setup method
-    # all module which use this base setup, use the object name to find the object
-    geom_obj = doc.addObject("Part::Box", "Box")
-    geom_obj.Height = geom_obj.Width = geom_obj.Length = 10
-    doc.recompute()
-
-    if FreeCAD.GuiUp:
-        geom_obj.ViewObject.Document.activeView().viewAxonometric()
-        geom_obj.ViewObject.Document.activeView().fitAll()
-
-    # analysis
-    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
-
-    # material
-    material_obj = ObjectsFem.makeMaterialSolid(doc, "MechanicalMaterial")
-    mat = material_obj.Material
-    mat["Name"] = "Steel-Generic"
-    mat["YoungsModulus"] = "200000 MPa"
-    mat["PoissonRatio"] = "0.30"
-    mat["Density"] = "7900 kg/m^3"
-    material_obj.Material = mat
-    analysis.addObject(material_obj)
-
-    # mesh
-    from .meshes.mesh_boxanalysis_tetra10 import create_nodes, create_elements
-    fem_mesh = Fem.FemMesh()
-    control = create_nodes(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating nodes.\n")
-    control = create_elements(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating elements.\n")
-    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
-    femmesh_obj.FemMesh = fem_mesh
-    femmesh_obj.Part = geom_obj
-    femmesh_obj.SecondOrderLinear = False
-    femmesh_obj.CharacteristicLengthMin = "8.0 mm"
-
-    doc.recompute()
-    return doc
-
-
 def setup(doc=None, solvertype="ccxtools"):
 
     # setup box static, add a fixed, force and a pressure constraint
-    doc = setup_base(doc, solvertype)
+    doc = setup_boxanalysisbase(doc, solvertype)
     geom_obj = doc.Box
     analysis = doc.Analysis
 
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_base.py b/src/Mod/Fem/femexamples/ccx_cantilever_base.py
new file mode 100644
index 0000000000..c3d1d7da51
--- /dev/null
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_base.py
@@ -0,0 +1,109 @@
+# ***************************************************************************
+# *   Copyright (c) 2019 Bernd Hahnebach <bernd@bimstatik.org>              *
+# *   Copyright (c) 2020 Sudhanshu Dubey <sudhanshu.thethunder@gmail.com    *
+# *                                                                         *
+# *   This file is part of the FreeCAD CAx development system.              *
+# *                                                                         *
+# *   This program is free software; you can redistribute it and/or modify  *
+# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
+# *   as published by the Free Software Foundation; either version 2 of     *
+# *   the License, or (at your option) any later version.                   *
+# *   for detail see the LICENCE text file.                                 *
+# *                                                                         *
+# *   This program is distributed in the hope that it will be useful,       *
+# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+# *   GNU Library General Public License for more details.                  *
+# *                                                                         *
+# *   You should have received a copy of the GNU Library General Public     *
+# *   License along with this program; if not, write to the Free Software   *
+# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
+# *   USA                                                                   *
+# *                                                                         *
+# ***************************************************************************
+
+import FreeCAD
+
+import Fem
+import ObjectsFem
+
+from .manager import get_meshname
+from .manager import init_doc
+
+
+def setup_cantileverbase(doc=None, solvertype="ccxtools"):
+
+    # init FreeCAD document
+    if doc is None:
+        doc = init_doc()
+
+    # geometric object
+    # object name is important in this base setup method
+    # all module which use this base setup, use the object name to find the object
+    geom_obj = doc.addObject("Part::Box", "Box")
+    geom_obj.Height = geom_obj.Width = 1000
+    geom_obj.Length = 8000
+    doc.recompute()
+    if FreeCAD.GuiUp:
+        geom_obj.ViewObject.Document.activeView().viewAxonometric()
+        geom_obj.ViewObject.Document.activeView().fitAll()
+
+    # analysis
+    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
+
+    # solver
+    if solvertype == "calculix":
+        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
+    elif solvertype == "ccxtools":
+        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
+        solver_obj.WorkingDir = u""
+    elif solvertype == "elmer":
+        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
+        ObjectsFem.makeEquationElasticity(doc, solver_obj)
+    elif solvertype == "z88":
+        solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
+    else:
+        FreeCAD.Console.PrintWarning(
+            "Not known or not supported solver type: {}. "
+            "No solver object was created.\n".format(solvertype)
+        )
+    if solvertype == "calculix" or solvertype == "ccxtools":
+        solver_obj.SplitInputWriter = False
+        solver_obj.AnalysisType = "static"
+        solver_obj.GeometricalNonlinearity = "linear"
+        solver_obj.ThermoMechSteadyState = False
+        solver_obj.MatrixSolverType = "default"
+        solver_obj.IterationsControlParameterTimeUse = False
+    analysis.addObject(solver_obj)
+
+    # material
+    material_obj = ObjectsFem.makeMaterialSolid(doc, "FemMaterial")
+    mat = material_obj.Material
+    mat["Name"] = "CalculiX-Steel"
+    mat["YoungsModulus"] = "210000 MPa"
+    mat["PoissonRatio"] = "0.30"
+    mat["Density"] = "7900 kg/m^3"
+    material_obj.Material = mat
+    analysis.addObject(material_obj)
+
+    # constraint fixed
+    con_fixed = ObjectsFem.makeConstraintFixed(doc, "ConstraintFixed")
+    con_fixed.References = [(geom_obj, "Face1")]
+    analysis.addObject(con_fixed)
+
+    # mesh
+    from .meshes.mesh_canticcx_tetra10 import create_nodes, create_elements
+    fem_mesh = Fem.FemMesh()
+    control = create_nodes(fem_mesh)
+    if not control:
+        FreeCAD.Console.PrintError("Error on creating nodes.\n")
+    control = create_elements(fem_mesh)
+    if not control:
+        FreeCAD.Console.PrintError("Error on creating elements.\n")
+    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
+    femmesh_obj.FemMesh = fem_mesh
+    femmesh_obj.Part = geom_obj
+    femmesh_obj.SecondOrderLinear = False
+
+    doc.recompute()
+    return doc
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py b/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
index a916448913..b0a810aa9f 100644
--- a/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_faceload.py
@@ -29,13 +29,9 @@ setup()
 
 """
 
-import FreeCAD
-
-import Fem
 import ObjectsFem
 
-from .manager import get_meshname
-from .manager import init_doc
+from .ccx_cantilever_base import setup_cantileverbase
 
 
 def get_information():
@@ -50,84 +46,6 @@ def get_information():
     }
 
 
-def setup_cantileverbase(doc=None, solvertype="ccxtools"):
-
-    # init FreeCAD document
-    if doc is None:
-        doc = init_doc()
-
-    # geometric object
-    # object name is important in this base setup method
-    # all module which use this base setup, use the object name to find the object
-    geom_obj = doc.addObject("Part::Box", "Box")
-    geom_obj.Height = geom_obj.Width = 1000
-    geom_obj.Length = 8000
-    doc.recompute()
-    if FreeCAD.GuiUp:
-        geom_obj.ViewObject.Document.activeView().viewAxonometric()
-        geom_obj.ViewObject.Document.activeView().fitAll()
-
-    # analysis
-    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
-
-    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
-        solver_obj.WorkingDir = u""
-    elif solvertype == "elmer":
-        solver_obj = ObjectsFem.makeSolverElmer(doc, "SolverElmer")
-        ObjectsFem.makeEquationElasticity(doc, solver_obj)
-    elif solvertype == "z88":
-        solver_obj = ObjectsFem.makeSolverZ88(doc, "SolverZ88")
-    else:
-        FreeCAD.Console.PrintWarning(
-            "Not known or not supported solver type: {}. "
-            "No solver object was created.\n".format(solvertype)
-        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
-        solver_obj.SplitInputWriter = False
-        solver_obj.AnalysisType = "static"
-        solver_obj.GeometricalNonlinearity = "linear"
-        solver_obj.ThermoMechSteadyState = False
-        solver_obj.MatrixSolverType = "default"
-        solver_obj.IterationsControlParameterTimeUse = False
-    analysis.addObject(solver_obj)
-
-    # material
-    material_obj = ObjectsFem.makeMaterialSolid(doc, "FemMaterial")
-    mat = material_obj.Material
-    mat["Name"] = "CalculiX-Steel"
-    mat["YoungsModulus"] = "210000 MPa"
-    mat["PoissonRatio"] = "0.30"
-    mat["Density"] = "7900 kg/m^3"
-    material_obj.Material = mat
-    analysis.addObject(material_obj)
-
-    # constraint fixed
-    con_fixed = ObjectsFem.makeConstraintFixed(doc, "ConstraintFixed")
-    con_fixed.References = [(geom_obj, "Face1")]
-    analysis.addObject(con_fixed)
-
-    # mesh
-    from .meshes.mesh_canticcx_tetra10 import create_nodes, create_elements
-    fem_mesh = Fem.FemMesh()
-    control = create_nodes(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating nodes.\n")
-    control = create_elements(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating elements.\n")
-    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
-    femmesh_obj.FemMesh = fem_mesh
-    femmesh_obj.Part = geom_obj
-    femmesh_obj.SecondOrderLinear = False
-
-    doc.recompute()
-    return doc
-
-
 def setup(doc=None, solvertype="ccxtools"):
     # setup CalculiX cantilever, apply 9 MN on surface of front end face
 
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_hexa20faceload.py b/src/Mod/Fem/femexamples/ccx_cantilever_hexa20faceload.py
index 75bde842ee..b4b2e62748 100644
--- a/src/Mod/Fem/femexamples/ccx_cantilever_hexa20faceload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_hexa20faceload.py
@@ -34,7 +34,6 @@ import FreeCAD
 import Fem
 
 from .ccx_cantilever_faceload import setup as setup_with_faceload
-
 from .manager import get_meshname
 
 
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py b/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py
index 06f778db1d..e43ef69e9a 100644
--- a/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_nodeload.py
@@ -29,11 +29,9 @@ setup()
 
 """
 
-# import FreeCAD
-
 import ObjectsFem
 
-from .ccx_cantilever_faceload import setup_cantileverbase
+from .ccx_cantilever_base import setup_cantileverbase
 
 
 def get_information():
diff --git a/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py b/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py
index bfdf25f2cc..9da4d442b7 100644
--- a/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py
+++ b/src/Mod/Fem/femexamples/ccx_cantilever_prescribeddisplacement.py
@@ -29,11 +29,9 @@ setup()
 
 """
 
-# import FreeCAD
-
 import ObjectsFem
 
-from .ccx_cantilever_faceload import setup_cantileverbase
+from .ccx_cantilever_base import setup_cantileverbase
 
 
 def get_information():
diff --git a/src/Mod/Fem/femexamples/examplesgui.py b/src/Mod/Fem/femexamples/examplesgui.py
index 77eeffbca9..078e0c14c9 100644
--- a/src/Mod/Fem/femexamples/examplesgui.py
+++ b/src/Mod/Fem/femexamples/examplesgui.py
@@ -54,11 +54,13 @@ class FemExamples(QtGui.QWidget):
         path = os.path.dirname(os.path.realpath(__file__))
         files = [f for f in os.listdir(str(path))]
         not_files = [
+            "__init__.py",
+            "__pycache__",
+            "boxanalysis_base.py",
+            "ccx_cantilever_base.py",
             "examplesgui.py",
             "manager.py",
             "meshes",
-            "__init__.py",
-            "__pycache__",
         ]
 
         files = [str(f) for f in files if f not in not_files]