diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 51ae5c8bb7..d309cab56c 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -221,8 +221,8 @@ Posició - + Transform Transformar @@ -6863,66 +6863,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definit per l'usuari... + - Wrong direction Direcció incorrecta + - Direction must not be the null vector La direcció no pot ser un vector nul. @@ -6953,9 +6953,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Macros @@ -9222,8 +9222,8 @@ Please open a browser window and type in: http://localhost:%1. Mou l'anotació - + Transform Transformar @@ -10414,9 +10414,9 @@ the current copy will be lost. Crea un document buit nou + - Unnamed Sense nom @@ -12075,12 +12075,12 @@ Encara voleu continuar? ViewIsometricCmd - + Isometric Isomètrica - + Set NaviCube to Isometric mode Estableix NaviCube en el mode isomètric @@ -12088,12 +12088,12 @@ Encara voleu continuar? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Estableix la visualització al mode ortogonal @@ -12101,12 +12101,12 @@ Encara voleu continuar? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Defineix la visualització en mode de perspectiva @@ -12114,12 +12114,12 @@ Encara voleu continuar? ViewZoomToFitCmd - + Zoom to fit Zoom per a encabir - + Zoom so that model fills the view Zoom perquè el model ompli la visualització diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index ee97053ed5..6d9d1d04fb 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -221,8 +221,8 @@ Umístění - + Transform Transformace @@ -6866,66 +6866,66 @@ Chcete uložit provedené změny? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Uživatelem definované... + - Wrong direction Špatný směr + - Direction must not be the null vector Směr nesmí být nulový vektor @@ -6956,9 +6956,9 @@ Chcete uložit provedené změny? Gui::MacroCommand + - Macros Makra @@ -9234,8 +9234,8 @@ Prosím, otevřete okno prohlížeče a zadejte: http://localhost:%1.Přesunout poznámku - + Transform Transformace @@ -10426,9 +10426,9 @@ the current copy will be lost. Vytvořit nový prázdný dokument + - Unnamed Nepojmenovaný @@ -12087,12 +12087,12 @@ Chcete pokračovat? ViewIsometricCmd - + Isometric Izometrie - + Set NaviCube to Isometric mode Nastavit Navigační Kostku do izometrického módu @@ -12100,12 +12100,12 @@ Chcete pokračovat? ViewOrthographicCmd - + Orthographic Pravoúhlé - + Set View to Orthographic mode Nastavit pravoúhlé zobrazení @@ -12113,12 +12113,12 @@ Chcete pokračovat? ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Nastavit perspektivní zobrazení @@ -12126,12 +12126,12 @@ Chcete pokračovat? ViewZoomToFitCmd - + Zoom to fit Zoom na vše - + Zoom so that model fills the view Přiblížit tak, že model vyplní zobrazení diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index 5316b36d5c..303b70778d 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 0f95119476..ac2a87a254 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -221,8 +221,8 @@ Placement - + Transform Transformieren @@ -1390,22 +1390,22 @@ Wenn dies nicht ausgewählt ist, muss die Eigenschaft eindeutig benannt sein und - Multiple defined keyboard shortcut + Multiple defined shortcut Mehrfach belegte Tastenkombination - The keyboard shortcut '%1' is defined more than once. This could result in unexpected behaviour. + The shortcut '%1' is defined more than once. This could result in unexpected behaviour. Die Tastenkombination '%1' ist mehr als einmal definiert. Dies kann zu unerwartetem Verhalten führen. - Already defined keyboard shortcut + Already defined shortcut Bereits belegte Tastenkombination - The keyboard shortcut '%1' is already assigned to '%2'. + The shortcut '%1' is already assigned to '%2'. Die Tastenkombination '%1' ist bereits '%2' zugewiesen. @@ -4656,7 +4656,7 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> - Keyboard shortcut count + Shortcut count Anzahl der Tastenkürzel @@ -5579,6 +5579,11 @@ The 'Status' column shows whether the document could be recovered. Transient directories deleted. Temporäre Verzeichnisse gelöscht. + + + Transient deleted + Vorübergehend gelöscht + Gui::Dialog::DownloadItem @@ -6851,66 +6856,66 @@ Sollen die Änderungen gespeichert werden? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Benutzerdefiniert... + - Wrong direction Falsche Richtung + - Direction must not be the null vector Richtungsvektor darf nicht der Nullvektor sein @@ -6941,9 +6946,9 @@ Sollen die Änderungen gespeichert werden? Gui::MacroCommand + - Macros Makros @@ -7533,7 +7538,7 @@ Wollen Sie sie beenden, ohne Ihre Daten zu speichern? - Run macro %1 (Shift+click to edit) keyboard shortcut: %2 + Run macro %1 (Shift+click to edit) shortcut: %2 Makro %1 ausführen (Umschalt+Klick zum Bearbeiten) Tastenkürzel: %2 @@ -9221,8 +9226,8 @@ Bitte starten Sie einen Browser und geben darin ein: http://localhost:%1.Beschriftung verschieben - + Transform Transformieren @@ -10410,9 +10415,9 @@ the current copy will be lost. Neues Dokument erstellen + - Unnamed Unbenannt @@ -12071,12 +12076,12 @@ Möchten Sie trotzdem fortfahren? ViewIsometricCmd - + Isometric Isometrisch - + Set NaviCube to Isometric mode Setze NaviCube in den isometrische Modus @@ -12084,12 +12089,12 @@ Möchten Sie trotzdem fortfahren? ViewOrthographicCmd - + Orthographic Orthogonal - + Set View to Orthographic mode Setze die Ansicht auf den orthogonalen Modus @@ -12097,12 +12102,12 @@ Möchten Sie trotzdem fortfahren? ViewPerspectiveCmd - + Perspective Perspektive - + Set View to Perspective mode Setze Ansicht auf perspektivische Darstellung @@ -12110,12 +12115,12 @@ Möchten Sie trotzdem fortfahren? ViewZoomToFitCmd - + Zoom to fit Bild an Fenster anpassen - + Zoom so that model fills the view Ansicht auf Modellgrenzen einstellen diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index 900465e56b..4e8504fcbb 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -221,8 +221,8 @@ Τοποθέτηση - + Transform Transform @@ -6874,66 +6874,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Ορισμένο από τον χρήστη... + - Wrong direction Λάθος κατεύθυνση + - Direction must not be the null vector Η κατεύθυνση δεν πρέπει να ορίζεται από το μηδενικό διάνυσμα @@ -6964,9 +6964,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Μακροεντολές @@ -9245,8 +9245,8 @@ Please open a browser window and type in: http://localhost:%1. Μετακίνηση περιγραφής - + Transform Transform @@ -10437,9 +10437,9 @@ the current copy will be lost. Δημιουργήστε ένα νέο κενό έγγραφο + - Unnamed Ανώνυμο @@ -12098,12 +12098,12 @@ Do you still want to proceed; ViewIsometricCmd - + Isometric Ισομετρική - + Set NaviCube to Isometric mode Ορισμός του Κύβου Πλοήγησης (NaviCube) σε Ισομετρική κατάσταση λειτουργίας @@ -12111,12 +12111,12 @@ Do you still want to proceed; ViewOrthographicCmd - + Orthographic Ορθογραφική - + Set View to Orthographic mode Ορισμός της Προβολής σε Ορθογραφική κατάσταση λειτουργίας @@ -12124,12 +12124,12 @@ Do you still want to proceed; ViewPerspectiveCmd - + Perspective Προοπτική - + Set View to Perspective mode Ορισμός της Προβολής σε Προοπτική κατάσταση λειτουργίας @@ -12137,12 +12137,12 @@ Do you still want to proceed; ViewZoomToFitCmd - + Zoom to fit Εστίαση ώστε να χωρέσει - + Zoom so that model fills the view Εστίαση, έτσι, ώστε το μοντέλο να γεμίζει την περιοχή προβολής diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index 1a3205cc0a..03bf154b3f 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -221,8 +221,8 @@ Ubicación - + Transform Transformar @@ -6861,66 +6861,66 @@ Desea guardar los cambios? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definido por el usuario... + - Wrong direction Dirección incorrecta + - Direction must not be the null vector La dirección no puede ser el vector nulo @@ -6951,9 +6951,9 @@ Desea guardar los cambios? Gui::MacroCommand + - Macros Macros @@ -9227,8 +9227,8 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. Mover anotación - + Transform Transformar @@ -10418,9 +10418,9 @@ la copia actual se perderá. Crea un documento vacío nuevo + - Unnamed Sin nombre @@ -12079,12 +12079,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Establecer NaviCube en modo Isométrico @@ -12092,12 +12092,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Configurar Vista a modo Ortogonal @@ -12105,12 +12105,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Configurar Vista a Modo Perspectiva @@ -12118,12 +12118,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewZoomToFitCmd - + Zoom to fit Zoom hasta encajar - + Zoom so that model fills the view Zoom para que el modelo llene la vista diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index ce8cfb4f1c..323bedd046 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -221,8 +221,8 @@ Ubicación - + Transform Transformar @@ -6864,66 +6864,66 @@ Desea guardar los cambios? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definido por el usuario... + - Wrong direction Dirección incorrecta + - Direction must not be the null vector La dirección no puede ser el vector nulo @@ -6954,9 +6954,9 @@ Desea guardar los cambios? Gui::MacroCommand + - Macros Macros @@ -9230,8 +9230,8 @@ Por favor abra una ventana del navegador y escriba en ella: http://localhost:%1. Mover anotación - + Transform Transformar @@ -10421,9 +10421,9 @@ la copia actual se perderá. Crea un documento vacío nuevo + - Unnamed Sin nombre @@ -12082,12 +12082,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Configurar NaviCube al modo Isométrico @@ -12095,12 +12095,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Establecer Vista a modo Ortogonal @@ -12108,12 +12108,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Configurar Vista a modo Perspectiva @@ -12121,12 +12121,12 @@ Por favor, compruebe la Vista de Reportes para más detalles. ViewZoomToFitCmd - + Zoom to fit Zoom para ajustar - + Zoom so that model fills the view Zoom para que ese modelo llene la vista diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index ab6a86d590..5be39e3a14 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 47e8986df1..7148afbb85 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -221,8 +221,8 @@ Kokapena - + Transform Transformatu @@ -6876,66 +6876,66 @@ Aldaketak gorde nahi dituzu? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Erabiltzaileak definitutakoa... + - Wrong direction Norabide okerra + - Direction must not be the null vector Norabideak ezin du bektore nulua izan @@ -6966,9 +6966,9 @@ Aldaketak gorde nahi dituzu? Gui::MacroCommand + - Macros Makroak @@ -9247,8 +9247,8 @@ Mesedez, ireki nabigatzaile-leiho bat eta idatzi: http://localhost:%1.Mugitu oharpena - + Transform Transformatu @@ -9482,7 +9482,7 @@ Berregin automatikoki kopia estekatutako jatorrizko objektua aldatzen bada. Refresh configurable object - Refresh configurable object + Freskatu objektu konfiguragarria @@ -10438,9 +10438,9 @@ the current copy will be lost. Sortu dokumentu huts berri bat + - Unnamed Izenik gabea @@ -12099,12 +12099,12 @@ Jarraitu nahi al duzu? ViewIsometricCmd - + Isometric Isometrikoa - + Set NaviCube to Isometric mode Ezarri nabigazio-kuboa modu isometrikoan @@ -12112,12 +12112,12 @@ Jarraitu nahi al duzu? ViewOrthographicCmd - + Orthographic Ortografikoa - + Set View to Orthographic mode Ezarri bista modu ortografikora @@ -12125,12 +12125,12 @@ Jarraitu nahi al duzu? ViewPerspectiveCmd - + Perspective Perspektiba - + Set View to Perspective mode Ezarri bista perspektibako modura @@ -12138,12 +12138,12 @@ Jarraitu nahi al duzu? ViewZoomToFitCmd - + Zoom to fit Zooma doitzeko - + Zoom so that model fills the view Egin zooma ereduak bista bete dezan diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 657c6129fb..a94590bddd 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -221,8 +221,8 @@ Sijainti - + Transform muunna @@ -6872,66 +6872,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Käyttäjän määrittelemä... + - Wrong direction Väärä suunta + - Direction must not be the null vector Suunta ei saa olla null-arvoinen vektori @@ -6962,9 +6962,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Makrot @@ -9239,8 +9239,8 @@ Please open a browser window and type in: http://localhost:%1. Siirrä lisähuomautusta - + Transform muunna @@ -10431,9 +10431,9 @@ the current copy will be lost. Luo uusi tyhjä dokumentti + - Unnamed Nimetön @@ -12092,12 +12092,12 @@ Haluatko silti jatkaa? ViewIsometricCmd - + Isometric Isometrinen - + Set NaviCube to Isometric mode Aseta navigointi-kuutio isometriseen tilaan @@ -12105,12 +12105,12 @@ Haluatko silti jatkaa? ViewOrthographicCmd - + Orthographic Ortograafinen - + Set View to Orthographic mode Aseta näkymä Ortograafiseen tilaan @@ -12118,12 +12118,12 @@ Haluatko silti jatkaa? ViewPerspectiveCmd - + Perspective Perspektiivi - + Set View to Perspective mode Aseta näkymä perspektiiviseen tilaan @@ -12131,12 +12131,12 @@ Haluatko silti jatkaa? ViewZoomToFitCmd - + Zoom to fit Sovita ruutuun - + Zoom so that model fills the view Zoomaus niin, että malli täyttää näkymän diff --git a/src/Gui/Language/FreeCAD_fil.ts b/src/Gui/Language/FreeCAD_fil.ts index c36cbdd8ac..f70c967819 100644 --- a/src/Gui/Language/FreeCAD_fil.ts +++ b/src/Gui/Language/FreeCAD_fil.ts @@ -221,8 +221,8 @@ Pagkakalagay - + Transform Transform @@ -6874,66 +6874,66 @@ Gusto mo bang i-save ang iyong mga pagbabago? Gui::LocationDialog + + - - X Exis + + - - Y Y + + - - Z Z + + - - User defined... Natukoy ang user... + - Wrong direction Maling direksyon + - Direction must not be the null vector Ang direksyon ay hindi dapat ang null vector @@ -6964,9 +6964,9 @@ Gusto mo bang i-save ang iyong mga pagbabago? Gui::MacroCommand + - Macros Mga Macro @@ -9243,8 +9243,8 @@ Mangyaring buksan ang isang bintana ng browser at uri sa: http://localhost:%1.Ilipat ang anotasyon - + Transform Transform @@ -10435,9 +10435,9 @@ the current copy will be lost. Gumawa ng isang bagong dokumentong walang laman + - Unnamed Walang pangalan @@ -12096,12 +12096,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isometric - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12109,12 +12109,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Orthographic - + Set View to Orthographic mode Set View to Orthographic mode @@ -12122,12 +12122,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspective - + Set View to Perspective mode Set View to Perspective mode @@ -12135,12 +12135,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 8b5547dfac..fabe6996e3 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -221,8 +221,8 @@ Placement - + Transform Transformer @@ -6867,66 +6867,66 @@ Voulez enregistrer les modifications ? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Défini par l'utilisateur... + - Wrong direction Mauvaise direction + - Direction must not be the null vector La direction ne peut pas être un vecteur nul @@ -6957,9 +6957,9 @@ Voulez enregistrer les modifications ? Gui::MacroCommand + - Macros Macros @@ -9231,8 +9231,8 @@ Veuillez ouvrir une fenêtre de navigateur et saisir : http://localhost:%1.Déplacer l'annotation - + Transform Transformer @@ -10420,9 +10420,9 @@ Notez que toute modification apportée à la copie en cours sera perdue.Créer un nouveau document vide + - Unnamed Sans nom @@ -12081,12 +12081,12 @@ Voulez-vous tout de même continuer ? ViewIsometricCmd - + Isometric Isométrique - + Set NaviCube to Isometric mode Régler NaviCube en mode isométrique @@ -12094,12 +12094,12 @@ Voulez-vous tout de même continuer ? ViewOrthographicCmd - + Orthographic Orthographique - + Set View to Orthographic mode Définir la vue en mode orthographique @@ -12107,12 +12107,12 @@ Voulez-vous tout de même continuer ? ViewPerspectiveCmd - + Perspective Perspective - + Set View to Perspective mode Définir la vue en mode Perspective @@ -12120,12 +12120,12 @@ Voulez-vous tout de même continuer ? ViewZoomToFitCmd - + Zoom to fit Ajuster le zoom - + Zoom so that model fills the view Zoom pour que le modèle remplisse la vue diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 3df9fad418..9184c39a42 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -221,8 +221,8 @@ Emprazamento - + Transform Transformar @@ -6874,66 +6874,66 @@ Quere gardar os cambios? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definido pelo usuario... + - Wrong direction Dirección errada + - Direction must not be the null vector A dirección non pode ser o vector nulo @@ -6964,9 +6964,9 @@ Quere gardar os cambios? Gui::MacroCommand + - Macros Macros @@ -9244,8 +9244,8 @@ Por favor, abra un buscador e escriba: http://localhost:%1. Mover apuntamento - + Transform Transformar @@ -10436,9 +10436,9 @@ the current copy will be lost. Abrir un documento novo baleiro + - Unnamed Sen nome @@ -12097,12 +12097,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Axuste NaviCube a modo Isométrico @@ -12110,12 +12110,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortográfica - + Set View to Orthographic mode Conxunto de Vista a modo Ortogonal @@ -12123,12 +12123,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Conxunto de Vista a modo Perspectiva @@ -12136,12 +12136,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom para axustar - + Zoom so that model fills the view Zoom para que o modelo encha a vista diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index d5af054159..85944bf559 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -221,8 +221,8 @@ Položaj - + Transform Transformiraj @@ -6923,66 +6923,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Korisnički definirano... + - Wrong direction Pogrešan smjer + - Direction must not be the null vector Smjer ne smije biti nula @@ -7013,9 +7013,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Makronaredbe @@ -9304,8 +9304,8 @@ Please open a browser window and type in: http://localhost:%1. Premjesti primjedbu - + Transform Transformiraj @@ -10503,9 +10503,9 @@ the current copy will be lost. Kreira novi prazni dokument + - Unnamed Neimenovano @@ -12174,12 +12174,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewIsometricCmd - + Isometric Izometrički - + Set NaviCube to Isometric mode Postavljanje NaviCube u izometrički način @@ -12187,12 +12187,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewOrthographicCmd - + Orthographic Ortografijska - + Set View to Orthographic mode Postavi pogled na Ortografski način @@ -12200,12 +12200,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Postavi pogled na perspektivu @@ -12213,12 +12213,12 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. ViewZoomToFitCmd - + Zoom to fit Povećaj da stane - + Zoom so that model fills the view Zumiranja tako da model ispunjava u pogledu diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 2128f00acc..2e661fbad9 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -221,8 +221,8 @@ Elhelyezés - + Transform Átalakítás @@ -6868,66 +6868,66 @@ El akarja menteni a változásokat? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Felhasználó által megadott... + - Wrong direction Rossz irány + - Direction must not be the null vector Irány nem lehet nullvektor @@ -6958,9 +6958,9 @@ El akarja menteni a változásokat? Gui::MacroCommand + - Macros Makrók @@ -9238,8 +9238,8 @@ Nyisson meg egy böngészőt, és írja be: http://localhost:%1. Lépés leírása - + Transform Átalakítás @@ -10430,9 +10430,9 @@ az aktuális példány elveszik. Új üres munkalap létrehozása + - Unnamed Névtelen @@ -12091,12 +12091,12 @@ Még mindig fojtatni szeretné? ViewIsometricCmd - + Isometric Izometrikus - + Set NaviCube to Isometric mode NaviKocka beállítása izometrikus módra @@ -12104,12 +12104,12 @@ Még mindig fojtatni szeretné? ViewOrthographicCmd - + Orthographic Függőleges vetület - + Set View to Orthographic mode Nézet beállítása függőleges vetületre @@ -12117,12 +12117,12 @@ Még mindig fojtatni szeretné? ViewPerspectiveCmd - + Perspective Perspektíva - + Set View to Perspective mode Nézet beállítása perspektivikus vetületre @@ -12130,12 +12130,12 @@ Még mindig fojtatni szeretné? ViewZoomToFitCmd - + Zoom to fit Mérethez igazítás - + Zoom so that model fills the view Nagyítsa úgy, hogy a modell kitöltse a nézetet diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index 24c478414b..a5562aafa8 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -221,8 +221,8 @@ Penempatan - + Transform Transform @@ -6864,66 +6864,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Ditetapkan pengguna... + - Wrong direction Salah arah + - Direction must not be the null vector Arah tidak boleh menjadi vektor nol @@ -6954,9 +6954,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Makro @@ -9222,8 +9222,8 @@ Please open a browser window and type in: http://localhost:%1. Pindahkan anotasi - + Transform Transform @@ -10414,9 +10414,9 @@ the current copy will be lost. Buat dokumen kosong baru + - Unnamed Tanpa nama @@ -12075,12 +12075,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isometrik - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12088,12 +12088,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortografis - + Set View to Orthographic mode Set View to Orthographic mode @@ -12101,12 +12101,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspektif - + Set View to Perspective mode Set View to Perspective mode @@ -12114,12 +12114,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index f330906f94..15ae7f74c0 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -221,8 +221,8 @@ Posizionamento - + Transform Trasforma @@ -6870,66 +6870,66 @@ Si desidera salvare le modifiche? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definito dall'utente... + - Wrong direction Direzione sbagliata + - Direction must not be the null vector La direzione non può essere un vettore nullo @@ -6960,9 +6960,9 @@ Si desidera salvare le modifiche? Gui::MacroCommand + - Macros Macro @@ -9240,8 +9240,8 @@ Aprire una finestra browser e scrivere http://localhost:%1. Sposta annotazione - + Transform Trasforma @@ -10432,9 +10432,9 @@ la copia corrente andranno perse. Crea un documento vuoto + - Unnamed Senza nome @@ -12093,12 +12093,12 @@ Si desidera ancora procedere? ViewIsometricCmd - + Isometric Isometrica - + Set NaviCube to Isometric mode Imposta NaviCube in modalità isometrica @@ -12106,12 +12106,12 @@ Si desidera ancora procedere? ViewOrthographicCmd - + Orthographic Ortografica - + Set View to Orthographic mode Imposta la vista in modalità ortografica @@ -12119,12 +12119,12 @@ Si desidera ancora procedere? ViewPerspectiveCmd - + Perspective Prospettiva - + Set View to Perspective mode Imposta la vista in prospettiva @@ -12132,12 +12132,12 @@ Si desidera ancora procedere? ViewZoomToFitCmd - + Zoom to fit Adatta alla finestra - + Zoom so that model fills the view Ingrandisce in modo che il modello riempia la vista diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index c8c7d98534..f1a68b8a67 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -221,8 +221,8 @@ 配置 - + Transform 変換 @@ -6841,66 +6841,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... ユーザ定義... + - Wrong direction 間違った方向 + - Direction must not be the null vector 方向はnullのベクトルであってはならない @@ -6931,9 +6931,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros マクロ @@ -9206,8 +9206,8 @@ Please open a browser window and type in: http://localhost:%1. 注釈を移動 - + Transform 変換 @@ -10397,9 +10397,9 @@ the current copy will be lost. 新しい空のドキュメントを作成 + - Unnamed Unnamed @@ -12058,12 +12058,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric アイソメトリック - + Set NaviCube to Isometric mode ナビキューブを等角投影モードに設定 @@ -12071,12 +12071,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正射投影 - + Set View to Orthographic mode 表示を正射投影モードに設定 @@ -12084,12 +12084,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透視投影 - + Set View to Perspective mode 表示を透視投影モードに設定 @@ -12097,12 +12097,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit フィットするようズーム - + Zoom so that model fills the view モデルがビュー全体に表示されるようズーム diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index b2f7acb3e8..048ffbcb09 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -221,8 +221,8 @@ მდებარეობა - + Transform გარდაქმნა @@ -6860,66 +6860,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... მომხმარებლის მიერ მითითებული... + - Wrong direction არასწორი მიმართულება + - Direction must not be the null vector მიმართულება ვერ იქნება ნულოვანი ვექტორი @@ -6950,9 +6950,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros მაკროები @@ -9231,8 +9231,8 @@ Please open a browser window and type in: http://localhost:%1. ანოტაციის გადატანა - + Transform გარდაქმნა @@ -10422,9 +10422,9 @@ the current copy will be lost. ახალი ცარიელი პროექტის შექმნა + - Unnamed უსახელო @@ -12083,12 +12083,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric იზომეტრიული - + Set NaviCube to Isometric mode ნავიკუბის იზომეტრიულ რეჟიმში გადართვა @@ -12096,12 +12096,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic ორთოგონალური პროექცია - + Set View to Orthographic mode ხედის ორთოგრაფიულ რეჟიმზე დაყენება @@ -12109,12 +12109,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective პერსპექტივა - + Set View to Perspective mode ხედის პერსპექტიულ პროექციაზე დაყენება @@ -12122,12 +12122,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit ხედის ფანჯარაში ჩატევა - + Zoom so that model fills the view ხედიის ზომებამდე გადიდება diff --git a/src/Gui/Language/FreeCAD_lt.ts b/src/Gui/Language/FreeCAD_lt.ts index 6c3de9f34e..d1d1adbe4c 100644 --- a/src/Gui/Language/FreeCAD_lt.ts +++ b/src/Gui/Language/FreeCAD_lt.ts @@ -221,8 +221,8 @@ Išdėstymas - + Transform Keisti @@ -6871,66 +6871,66 @@ Ar norite įrašyti keitimus? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Vartotojo apibrėžtas... + - Wrong direction Neteisinga kryptis + - Direction must not be the null vector Krypties vektorius negali būti nulinis vektorius @@ -6961,9 +6961,9 @@ Ar norite įrašyti keitimus? Gui::MacroCommand + - Macros Makrokomandos @@ -9242,8 +9242,8 @@ Atverkite naršyklės langą ir įveskite: http://localhost:%1. Perkelti aprašą - + Transform Keisti @@ -10434,9 +10434,9 @@ the current copy will be lost. Sukurti naują tuščią dokumentą + - Unnamed Be pavadinimo @@ -12095,12 +12095,12 @@ Ar vis dar norite tęsti? ViewIsometricCmd - + Isometric Izometrinis vaizdavimas - + Set NaviCube to Isometric mode Nustatyti NaviCube į izometrinę veikseną @@ -12108,12 +12108,12 @@ Ar vis dar norite tęsti? ViewOrthographicCmd - + Orthographic Ortografinis - + Set View to Orthographic mode Perjungti į ortografinį rodymą @@ -12121,12 +12121,12 @@ Ar vis dar norite tęsti? ViewPerspectiveCmd - + Perspective Perspektyva - + Set View to Perspective mode Perjungti į perspektyvinį rodymą @@ -12134,12 +12134,12 @@ Ar vis dar norite tęsti? ViewZoomToFitCmd - + Zoom to fit Priartinti, kad tilptų viskas - + Zoom so that model fills the view Priartinama taip, kad modelis užpildo rodinio langą diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 1de76aff65..69f7a84291 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -221,8 +221,8 @@ Plaatsing - + Transform Transformeren @@ -6866,66 +6866,66 @@ Wilt u uw wijzigingen opslaan? Gui::LocationDialog + + - - X x + + - - Y Y + + - - Z Z + + - - User defined... Door gebruiker gedefinieerd... + - Wrong direction Verkeerde richting + - Direction must not be the null vector Richting mag niet de nul-vector zijn @@ -6956,9 +6956,9 @@ Wilt u uw wijzigingen opslaan? Gui::MacroCommand + - Macros Macro's @@ -9231,8 +9231,8 @@ Open een browservenster en typ: http://localhost:%1. Verplaats annotatie - + Transform Transformeren @@ -10423,9 +10423,9 @@ the current copy will be lost. Maak een nieuw leeg document + - Unnamed Naamloos @@ -12084,12 +12084,12 @@ Wilt u toch doorgaan? ViewIsometricCmd - + Isometric Isometrisch - + Set NaviCube to Isometric mode Stel de NaviCube in op de isometrische modus @@ -12097,12 +12097,12 @@ Wilt u toch doorgaan? ViewOrthographicCmd - + Orthographic Orthografisch - + Set View to Orthographic mode Stel de weergave in op de orthografische modus @@ -12110,12 +12110,12 @@ Wilt u toch doorgaan? ViewPerspectiveCmd - + Perspective Perspectief - + Set View to Perspective mode Stel de weergave in op Perspectiefmodus in @@ -12123,12 +12123,12 @@ Wilt u toch doorgaan? ViewZoomToFitCmd - + Zoom to fit Zoom om te passen - + Zoom so that model fills the view Zoom zodat het model het weergavegebied vult diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 182525d53b..a561bd66d3 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 0354be598e..e8be14bb17 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -221,8 +221,8 @@ Umiejscowienie - + Transform Przemieszczenie @@ -6871,66 +6871,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Zdefiniowane przez użytkownika... + - Wrong direction Nieprawidłowy kierunek + - Direction must not be the null vector Kierunek nie może być wektorem zerowym @@ -6961,9 +6961,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Makrodefinicje @@ -9236,8 +9236,8 @@ Proszę otworzyć okno przeglądarki i wpisać: http://localhost:%1.Przenieść adnotację - + Transform Przemieszczenie @@ -9472,7 +9472,7 @@ Kopia jest również automatycznie ponawiana, jeśli oryginalny obiekt połączo Refresh configurable object - Odśwież konfigurowalny obiekt + Przelicz obiekt parametryczny @@ -10428,9 +10428,9 @@ bieżącej kopii zostaną utracone. Utwórz nowy pusty dokument + - Unnamed Nienazwany @@ -12089,12 +12089,12 @@ Czy nadal chcesz kontynuować? ViewIsometricCmd - + Isometric Widok izometryczny - + Set NaviCube to Isometric mode Ustaw kostkę nawigacyjną na Widok izometryczny @@ -12102,12 +12102,12 @@ Czy nadal chcesz kontynuować? ViewOrthographicCmd - + Orthographic Ortogonalny - + Set View to Orthographic mode Ustaw widok na tryb ortogonalny @@ -12115,12 +12115,12 @@ Czy nadal chcesz kontynuować? ViewPerspectiveCmd - + Perspective Perspektywa - + Set View to Perspective mode Ustaw widok na tryb perspektywy @@ -12128,12 +12128,12 @@ Czy nadal chcesz kontynuować? ViewZoomToFitCmd - + Zoom to fit Przybliż i dopasuj - + Zoom so that model fills the view Przybliż tak, aby model wypełnił widok diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 0abbc08533..c171ce7be9 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -221,8 +221,8 @@ Posicionamento - + Transform Transformar @@ -6859,66 +6859,66 @@ Deseja salvar as alterações? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definido pelo usuário... + - Wrong direction Direção errada + - Direction must not be the null vector Direção não pode ser um vector nulo @@ -6949,9 +6949,9 @@ Deseja salvar as alterações? Gui::MacroCommand + - Macros Macros @@ -9220,8 +9220,8 @@ Please open a browser window and type in: http://localhost:%1. Mover a anotação - + Transform Transformar @@ -10412,9 +10412,9 @@ the current copy will be lost. Criar um novo documento vazio + - Unnamed Sem nome @@ -12073,12 +12073,12 @@ Deseja prosseguir mesmo assim? ViewIsometricCmd - + Isometric Isométrico - + Set NaviCube to Isometric mode Colocar o NaviCube em modo isométrico @@ -12086,12 +12086,12 @@ Deseja prosseguir mesmo assim? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Definir vista para o modo ortogonal @@ -12099,12 +12099,12 @@ Deseja prosseguir mesmo assim? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Definir vista para o modo perspectiva @@ -12112,12 +12112,12 @@ Deseja prosseguir mesmo assim? ViewZoomToFitCmd - + Zoom to fit Enquadrar - + Zoom so that model fills the view Zoom para que o modelo preencha a vista diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index ac7f166043..8f3d8ff3eb 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -221,8 +221,8 @@ Colocação - + Transform Transformar @@ -6867,66 +6867,66 @@ Deseja guardar as suas alterações? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definido pelo utilizador: + - Wrong direction Direção Errada + - Direction must not be the null vector Direção não pode ser um vector nulo @@ -6957,9 +6957,9 @@ Deseja guardar as suas alterações? Gui::MacroCommand + - Macros Macros @@ -9233,8 +9233,8 @@ Por favor, abra um navegador e digite: http://localhost:%1. Mover a anotação - + Transform Transformar @@ -10425,9 +10425,9 @@ the current copy will be lost. Criar um Novo Documento vazio + - Unnamed Sem nome @@ -12086,12 +12086,12 @@ Ainda deseja prosseguir? ViewIsometricCmd - + Isometric Isométrica - + Set NaviCube to Isometric mode Definir NaviCube para o modo Isometric @@ -12099,12 +12099,12 @@ Ainda deseja prosseguir? ViewOrthographicCmd - + Orthographic Ortográfico - + Set View to Orthographic mode Vista definida para o modo ortogonal @@ -12112,12 +12112,12 @@ Ainda deseja prosseguir? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Definir Vista para o modo de perspectiva @@ -12125,12 +12125,12 @@ Ainda deseja prosseguir? ViewZoomToFitCmd - + Zoom to fit Ajustar para caber - + Zoom so that model fills the view Ajustar o zoom para que o modelo preencha a vista diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 198e80d9e8..e0139e7a58 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -221,8 +221,8 @@ Amplasare - + Transform Transformare @@ -6867,66 +6867,66 @@ Doriți să salvați modificările? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definit de utilizator... + - Wrong direction Direcţie greşită + - Direction must not be the null vector Direcţia nu trebuie să fie vectorul nul @@ -6957,9 +6957,9 @@ Doriți să salvați modificările? Gui::MacroCommand + - Macros Macro-uri @@ -9233,8 +9233,8 @@ Please open a browser window and type in: http://localhost:%1. Muta adnotarea - + Transform Transformare @@ -10425,9 +10425,9 @@ the current copy will be lost. Creaţi un nou document gol + - Unnamed Nedenumit @@ -12086,12 +12086,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Izometrică - + Set NaviCube to Isometric mode Setează NaviCube în modul Izometric @@ -12099,12 +12099,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ortografic - + Set View to Orthographic mode Setează vizualizarea în modul ortografic @@ -12112,12 +12112,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Perspectivă - + Set View to Perspective mode Setați vizualizarea în modul Perspectivă @@ -12125,12 +12125,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Mărire pentru a se potrivi - + Zoom so that model fills the view Mărire astfel încât modelul umple vizualizarea diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index ea3439057c..3d1d5ae6cd 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -221,8 +221,8 @@ Расположение - + Transform Преобразовать @@ -6870,66 +6870,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Задать... + - Wrong direction Неправильное направление + - Direction must not be the null vector Направление не должно быть нулевым вектором @@ -6960,9 +6960,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Макрос @@ -9235,8 +9235,8 @@ Please open a browser window and type in: http://localhost:%1. Переместить заметку - + Transform Преобразовать @@ -10427,9 +10427,9 @@ the current copy will be lost. Создать новый пустой документ + - Unnamed Безымянный @@ -12088,12 +12088,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Изометрическая - + Set NaviCube to Isometric mode Установить навигационный куб в изометрический режим @@ -12101,12 +12101,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ортогональный - + Set View to Orthographic mode Установить вид в ортогональный режим @@ -12114,12 +12114,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Перспектива - + Set View to Perspective mode Установить вид в режим перспективной проекции @@ -12127,12 +12127,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Вписать в окно просмотра - + Zoom so that model fills the view Показать модель во весь вид diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index 77845f1a02..52780d99a8 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 107a81e03b..d0ba2570e0 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -221,8 +221,8 @@ Postavitev - + Transform Preoblikuj @@ -230,7 +230,7 @@ Toggle array elements - Toggle array elements + Preklopi med prvinami razpostavitve @@ -476,7 +476,7 @@ Press a keyboard shortcut - Press a keyboard shortcut + Stisnite tipkovno bližnjico @@ -6872,66 +6872,66 @@ Ali želite shraniti spremembe? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Uporabniško določeno... + - Wrong direction Napačna smer + - Direction must not be the null vector Smer ne sme biti ničelni vektor @@ -6962,9 +6962,9 @@ Ali želite shraniti spremembe? Gui::MacroCommand + - Macros Makri @@ -9243,8 +9243,8 @@ Odprite brskalnik in vtipkajte: http://localhost:%1. Premakni opis - + Transform Preoblikuj @@ -9495,7 +9495,7 @@ the current copy will be lost. Toggle array elements - Toggle array elements + Preklopi med prvinami razpostavitve @@ -10435,9 +10435,9 @@ the current copy will be lost. Ustvari nov, prazen dokument + - Unnamed Neimenovan @@ -12096,12 +12096,12 @@ Ali želite vseeno nadaljevati? ViewIsometricCmd - + Isometric Izometrična - + Set NaviCube to Isometric mode Nastavi krmilno kocko na izometrični način @@ -12109,12 +12109,12 @@ Ali želite vseeno nadaljevati? ViewOrthographicCmd - + Orthographic Pravokotno - + Set View to Orthographic mode Nastavi pogled na pravokotni način @@ -12122,12 +12122,12 @@ Ali želite vseeno nadaljevati? ViewPerspectiveCmd - + Perspective Perspektiva - + Set View to Perspective mode Nastavi pogled na perspektivni način @@ -12135,12 +12135,12 @@ Ali želite vseeno nadaljevati? ViewZoomToFitCmd - + Zoom to fit Prilagodi povečavo - + Zoom so that model fills the view Povečaj ali pomanjšaj, da se prilega pogledu diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 0913e469d1..80c8a9413c 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -221,8 +221,8 @@ Placering - + Transform Omvandla @@ -6870,66 +6870,66 @@ Vill du spara ändringarna? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Användardefinierad... + - Wrong direction Fel riktning + - Direction must not be the null vector Riktningen får inte vara noll vektorn @@ -6960,9 +6960,9 @@ Vill du spara ändringarna? Gui::MacroCommand + - Macros Makron @@ -9241,8 +9241,8 @@ Please open a browser window and type in: http://localhost:%1. Flytta annotering - + Transform Omvandla @@ -10433,9 +10433,9 @@ the current copy will be lost. Skapa ett nytt tomt dokument + - Unnamed Namnlös @@ -12092,12 +12092,12 @@ Vill du fortfarande fortsätta? ViewIsometricCmd - + Isometric Isometrisk - + Set NaviCube to Isometric mode Använd isometriskt läge för NaviKuben @@ -12105,12 +12105,12 @@ Vill du fortfarande fortsätta? ViewOrthographicCmd - + Orthographic Ortografisk - + Set View to Orthographic mode Använd ortografisk vy @@ -12118,12 +12118,12 @@ Vill du fortfarande fortsätta? ViewPerspectiveCmd - + Perspective Perspektiv - + Set View to Perspective mode Använd perspektivvy @@ -12131,12 +12131,12 @@ Vill du fortfarande fortsätta? ViewZoomToFitCmd - + Zoom to fit Anpassa storlek - + Zoom so that model fills the view Zooma så att modellen fyller vyn diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 88b2322bb4..9552709cd9 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -221,8 +221,8 @@ Yerleşim - + Transform Dönüştür @@ -6866,66 +6866,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Kullanıcı tanımlı... + - Wrong direction Yanlış yön + - Direction must not be the null vector Yön, boş vektör olmamalıdır @@ -6956,9 +6956,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Makrolar @@ -9231,8 +9231,8 @@ Please open a browser window and type in: http://localhost:%1. Ek açıklamayı taşı - + Transform Dönüştür @@ -10423,9 +10423,9 @@ the current copy will be lost. Yeni, boş bir belge oluştur + - Unnamed Adsız @@ -12083,12 +12083,12 @@ Hala ilerlemek istiyor musunuz? ViewIsometricCmd - + Isometric İzometrik - + Set NaviCube to Isometric mode NaviKüp'ü izometrik moda ayarla @@ -12096,12 +12096,12 @@ Hala ilerlemek istiyor musunuz? ViewOrthographicCmd - + Orthographic Ortografik - + Set View to Orthographic mode Görüntüyü ortografik moda ayarla @@ -12109,12 +12109,12 @@ Hala ilerlemek istiyor musunuz? ViewPerspectiveCmd - + Perspective Perspektif - + Set View to Perspective mode Görüntüyü perspektif moduna ayarla @@ -12122,12 +12122,12 @@ Hala ilerlemek istiyor musunuz? ViewZoomToFitCmd - + Zoom to fit Sığacak şekilde yakınlaştır - + Zoom so that model fills the view Modeli görünümü dolduracak şekilde yakınlaştır diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 6a014bcef5..82c5580cf8 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -221,8 +221,8 @@ Розташувати - + Transform Перетворити @@ -6870,66 +6870,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Визначено користувачем... + - Wrong direction Неправильний напрямок + - Direction must not be the null vector Напрям не може мати нульовий вектор @@ -6960,9 +6960,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Макроси @@ -9238,8 +9238,8 @@ Please open a browser window and type in: http://localhost:%1. Переміщення анотації - + Transform Перетворити @@ -10431,9 +10431,9 @@ the current copy will be lost. Створює новий порожній документ + - Unnamed Без назви @@ -12092,12 +12092,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Ізометричний - + Set NaviCube to Isometric mode Встановити NaviCube в ізометричний режим перегляду @@ -12105,12 +12105,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Ортогональний - + Set View to Orthographic mode Встановити ортогональний режим перегляду @@ -12118,12 +12118,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Перспектива - + Set View to Perspective mode Встановити перспективний режим перегляду @@ -12131,12 +12131,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Повністю вмістити у вікно перегляду - + Zoom so that model fills the view Показати модель повністю diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index 3f246dbc08..f912a18b2f 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -221,8 +221,8 @@ Posició - + Transform Transforma @@ -6857,66 +6857,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Definit per l'usuari... + - Wrong direction Direcció incorrecta + - Direction must not be the null vector La direcció no pot ser un vector nul. @@ -6947,9 +6947,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros Macros @@ -9215,8 +9215,8 @@ Please open a browser window and type in: http://localhost:%1. Mou l'anotació - + Transform Transforma @@ -10407,9 +10407,9 @@ the current copy will be lost. Crea un document buit nou + - Unnamed Sense nom @@ -12068,12 +12068,12 @@ Encara voleu continuar? ViewIsometricCmd - + Isometric Isomètric - + Set NaviCube to Isometric mode Estableix NaviCube en el mode isomètric @@ -12081,12 +12081,12 @@ Encara voleu continuar? ViewOrthographicCmd - + Orthographic Ortogonal - + Set View to Orthographic mode Estableix la visualització al mode ortogonal @@ -12094,12 +12094,12 @@ Encara voleu continuar? ViewPerspectiveCmd - + Perspective Perspectiva - + Set View to Perspective mode Defineix la visualització en mode de perspectiva @@ -12107,12 +12107,12 @@ Encara voleu continuar? ViewZoomToFitCmd - + Zoom to fit Zoom per a encabir - + Zoom so that model fills the view Zoom perquè el model òmpliga la visualització diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index c785bdc372..435e27045c 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -221,8 +221,8 @@ Vị trí - + Transform Biến đổi @@ -6875,66 +6875,66 @@ Bạn có muốn lưu các thay đổi của bạn? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... Đã xác định người dùng... + - Wrong direction Hướng sai + - Direction must not be the null vector Hướng không được xác định bởi vector 0 @@ -6965,9 +6965,9 @@ Bạn có muốn lưu các thay đổi của bạn? Gui::MacroCommand + - Macros Macro @@ -9246,8 +9246,8 @@ Hãy mở cửa sổ trình duyệt và nhập: http://localhost:%1.Di chuyển chú thích - + Transform Biến đổi @@ -10438,9 +10438,9 @@ the current copy will be lost. Tạo một tài liệu trống mới + - Unnamed Không có tên @@ -12099,12 +12099,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric Isometric - + Set NaviCube to Isometric mode Set NaviCube to Isometric mode @@ -12112,12 +12112,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic Orthographic - + Set View to Orthographic mode Set View to Orthographic mode @@ -12125,12 +12125,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective Phối cảnh - + Set View to Perspective mode Set View to Perspective mode @@ -12138,12 +12138,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Phóng vừa khít - + Zoom so that model fills the view Phóng cho mô hình vừa khít với ô xem diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 692331b147..7af4272045 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -221,8 +221,8 @@ 定位 - + Transform 变换 @@ -6861,66 +6861,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... 用户定义... + - Wrong direction 方向错误 + - Direction must not be the null vector 方向不能是零向量 @@ -6951,9 +6951,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros 宏 @@ -9224,8 +9224,8 @@ Please open a browser window and type in: http://localhost:%1. 移动批注 - + Transform 变换 @@ -10416,9 +10416,9 @@ the current copy will be lost. 创建一个新空白文档 + - Unnamed 未命名 @@ -12077,12 +12077,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric 等轴测 - + Set NaviCube to Isometric mode 将导航立方体设置为等距模式 @@ -12090,12 +12090,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正交投影 - + Set View to Orthographic mode 将视图设置为正交模式 @@ -12103,12 +12103,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透视 - + Set View to Perspective mode 将视图设置为透视模式 @@ -12116,12 +12116,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit 缩放到适合窗口大小 - + Zoom so that model fills the view 缩放以使模型填充视图 diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 2e84b32275..3037b3fc79 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -221,8 +221,8 @@ 佈置 - + Transform 轉換 @@ -6862,66 +6862,66 @@ Do you want to save your changes? Gui::LocationDialog + + - - X X + + - - Y Y + + - - Z Z + + - - User defined... 使用者定義... + - Wrong direction 錯誤的方向 + - Direction must not be the null vector 方向不可為空向量 @@ -6952,9 +6952,9 @@ Do you want to save your changes? Gui::MacroCommand + - Macros 巨集 @@ -9221,8 +9221,8 @@ Please open a browser window and type in: http://localhost:%1. 移動標註 - + Transform 轉換 @@ -10413,9 +10413,9 @@ the current copy will be lost. 建立一個新的空白檔案 + - Unnamed 未命名 @@ -12074,12 +12074,12 @@ Do you still want to proceed? ViewIsometricCmd - + Isometric 等角立體 - + Set NaviCube to Isometric mode 設定導覽方塊為立體正投影模式 @@ -12087,12 +12087,12 @@ Do you still want to proceed? ViewOrthographicCmd - + Orthographic 正投影法 - + Set View to Orthographic mode 將視圖切換到正投影模式 @@ -12100,12 +12100,12 @@ Do you still want to proceed? ViewPerspectiveCmd - + Perspective 透視法 - + Set View to Perspective mode 將視角切換至透視法投影模式 @@ -12113,12 +12113,12 @@ Do you still want to proceed? ViewZoomToFitCmd - + Zoom to fit Zoom to fit - + Zoom so that model fills the view Zoom so that model fills the view diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm index af3dd3d9c0..7baa539339 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 1f5540d4f3..c3d929adb0 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -11,7 +11,7 @@ Addon Manager installation problem: could not locate ALLOWED_PYTHON_PACKAGES.txt - Addon Manager installation problem: could not locate ALLOWED_PYTHON_PACKAGES.txt + Installationsproblem beim Addon-Manager: Konnte Datei ALLOWED_PYTHON_PACKAGES.txt nicht finden @@ -52,7 +52,7 @@ Worker process {} is taking a long time to stop... - Worker process {} is taking a long time to stop... + Arbeitsprozess {} braucht lange, um beendet zu werden... @@ -470,7 +470,7 @@ No Git Python installed, skipping git operations - No Git Python installed, skipping git operations + Kein Git Python installiert, Git Operationen werden übersprungen @@ -637,13 +637,13 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. Local updated Table header for git update time of local branch - Local updated + Lokale Version aktualisiert Remote updated Table header for git update time of remote branch - Remote updated + Remote aktualisiert @@ -717,7 +717,7 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. On branch {}, update available to version - On branch {}, update available to version + Auf Zweig {}, Aktualisierung verfügbar auf Version @@ -737,7 +737,7 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. This is the latest version available for branch {} - This is the latest version available for branch {} + Dies ist die neueste verfügbare Version für den Zweig {} @@ -1039,7 +1039,7 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. Unable to open macro wiki page at {} - Unable to open macro wiki page at {} + Makro-Wiki-Seite unter {} kann nicht geöffnet werden @@ -1077,7 +1077,7 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. <b>Package Name</b> - <b>Package Name</b> + <b>Paketname</b> @@ -1092,7 +1092,7 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. UpdateAvailable - UpdateAvailable + Update verfügbar @@ -1107,24 +1107,24 @@ Bitte FreeCAD neu starten, um die Änderungen zu übernehmen. This Addon has the following required and optional dependencies. You must install them before this Addon can be used. Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. - This Addon has the following required and optional dependencies. You must install them before this Addon can be used. + Diese Erweiterung hat die folgenden erforderlichen/ optionalen Abhängigkeiten. Sie müssen sie installieren, bevor dieses Addon verwendet werden kann. -Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. +Möchten Sie, dass der Addon-Manager sie automatisch installiert? Wählen Sie "Ignorieren", um die Erweiterung zu installieren, ohne die Abhängigkeiten zu installieren. FreeCAD Addons - FreeCAD Addons + FreeCAD Erweiterungen Required Python modules - Required Python modules + Erforderliche Python-Module Optional Python modules - Optional Python modules + Optionale Python-Module @@ -1157,12 +1157,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Update all Addons - Update all Addons + Alle Erweiterungen aktualisieren Check for updates - Check for updates + Auf Aktualisierungen prüfen @@ -1177,7 +1177,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Welcome to the Addon Manager - Welcome to the Addon Manager + Willkommen beim Addon-Manager @@ -1187,7 +1187,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Download Settings - Download Settings + Herunterladeeinstellungen @@ -1212,12 +1212,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore User-defined proxy: - User-defined proxy: + Benutzerdefinierter Proxy: These and other settings are available in the FreeCAD Preferences window. - These and other settings are available in the FreeCAD Preferences window. + Diese und andere Einstellungen sind im FreeCAD Einstellungs-Fenster verfügbar. @@ -1235,7 +1235,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore <h1>Package Name</h1> - <h1>Package Name</h1> + <h1>Paketname</h1> @@ -1245,7 +1245,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore (tags) - (tags) + (Tags) @@ -1260,7 +1260,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore UpdateAvailable - UpdateAvailable + Update verfügbar @@ -1268,7 +1268,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon manager options - Addon manager options + Addon-Manager Optionen @@ -1280,7 +1280,7 @@ installed addons will be checked for available updates Automatically check for updates at start (requires GitPython) - Automatically check for updates at start (requires GitPython) + Automatisch beim Start nach Updates suchen (benötigt GitPython) @@ -1290,22 +1290,22 @@ installed addons will be checked for available updates DownloadMacros - DownloadMacros + Makros herunterladen Addons - Addons + Erweiterungen Cache update frequency - Cache update frequency + Häufigkeit des Cache-Updates Manual (no automatic updates) - Manual (no automatic updates) + Manuell (keine automatischen Aktualisierungen) @@ -1320,17 +1320,17 @@ installed addons will be checked for available updates Hide Addons marked Python 2 Only - Hide Addons marked Python 2 Only + Nur für Python 2 markierte Erweiterungen ausblenden Hide Addons marked Obsolete - Hide Addons marked Obsolete + Veraltete Erweiterungen ausblenden Hide Addons that require a newer version of FreeCAD - Hide Addons that require a newer version of FreeCAD + Erweiterungen ausblenden, die eine neuere Version von FreeCAD voraussetzen @@ -1364,12 +1364,12 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). User-defined proxy: - User-defined proxy: + Benutzerdefinierter Proxy: Python executable (optional): - Python executable (optional): + Ausführbare Python-Datei (optional): @@ -1402,7 +1402,7 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Uninstalls a selected macro or workbench - Uninstalls a selected macro or workbench + Deinstalliert ein ausgewähltes Makro oder einen Arbeitsbereich @@ -1453,7 +1453,7 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Add a toolbar button for this macro? - Add a toolbar button for this macro? + Eine Werkzeugleistenschaltfläche für dieses Makro hinzufügen? @@ -1489,12 +1489,12 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Proxy login required - Proxy login required + Proxy-Anmeldung erforderlich Proxy requires authentication - Proxy requires authentication + Proxy erfordert Authentifizierung @@ -1509,7 +1509,7 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Realm: - Realm: + Bereich: @@ -1537,7 +1537,7 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Select a toolbar to add this macro to: - Select a toolbar to add this macro to: + Wählen Sie eine Symbolleiste, um dieses Makro hinzuzufügen: @@ -1555,7 +1555,7 @@ of the line after a space (e.g. https://github.com/FreeCAD/FreeCAD master). Add a toolbar button for this macro? - Add a toolbar button for this macro? + Eine Werkzeugleistenschaltfläche für dieses Makro hinzufügen? diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm index ad9cc8db21..ae2faf90d6 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 4f486aead8..5824e51ce9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -255,7 +255,7 @@ Some packages updates failed. - Some packages updates failed. + Pakete batzuen eguneratzeak huts egin du. @@ -275,7 +275,7 @@ Execution of macro failed. See console for failure details. - Execution of macro failed. See console for failure details. + Makroaren exekuzioak huts egin du. Begiratu kontsola xehetasun gehiagorako. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm index 53ea46298b..796bd5706a 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index 967cfa7fc0..5c7def4f6d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -393,7 +393,7 @@ Attempting to change non-git Macro setup to use git - Attempting to change non-git Macro setup to use git + Tentative de changement de la configuration non-git de la Macro pour utiliser git diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm index 5e4d46596a..07a13de621 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 439e67d24d..561d2f7e3b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -66,7 +66,7 @@ Custom repo list changed, forcing recache... - Custom repo list changed, forcing recache... + L'elenco dei repository personalizzati è stato modificato, si forza la recache... @@ -587,7 +587,7 @@ DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? - DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? + PERICOLO: La commutazione dei rami è destinata a sviluppatori e beta tester, e può causare documenti corrotti, non compatibili all'indietro, instabilità, crash e/o morte termica prematura dell'universo. Sei sicuro di voler continuare? @@ -597,7 +597,7 @@ WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? - WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? + ATTENZIONE: Questo repository ha modifiche locali non effettuate. Sei sicuro di voler cambiare i rami (apportando le modifiche con te)? @@ -1233,7 +1233,7 @@ Vuoi che Addon Manager li installi automaticamente? Scegli "Ignora" pe <h1>Package Name</h1> - <h1>Package Name</h1> + <h1>Nome pacchetto</h1> @@ -1320,7 +1320,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Hide Addons marked Python 2 Only - Hide Addons marked Python 2 Only + Nascondi Addons contrassegnati con Solo Python 2 @@ -1330,7 +1330,7 @@ gli addons installati verranno controllati per gli aggiornamenti disponibili Hide Addons that require a newer version of FreeCAD - Hide Addons that require a newer version of FreeCAD + Nascondi Addons che richiedono una nuova versione di FreeCAD diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index ffe57a32dc..9d538175da 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile La longitud d'aquest element, si no està basat en un perfil - + The width of this element, if not based on a profile L'amplària d'aquest element, si no està basada en un perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The structural nodes of this element Els nodes estructurals d'aquest element @@ -135,8 +135,8 @@ Distància de separació entre la línia central i la línia de nodes - + The facemaker type to use to build the profile of this object El tipus de generador de cares que s'ha d'utilitzar per a construir el perfil d'aquest objecte @@ -425,14 +425,14 @@ El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic - + The height of this object L'altura d'aquest objecte - + The computed floor area of this floor L'àrea calculada d'aquesta planta @@ -850,9 +850,9 @@ El tipus de connexió entre el final de les escales i la llosa del pis superior - + The type of this building El tipus d'aquest edifici @@ -956,8 +956,8 @@ Un desplaçament opcional entre l'origen del model (0,0,0) i el punt indicat per les coordenades geogràfiques - + The type of this object El tipus d'aquest objecte @@ -1147,20 +1147,20 @@ El nivell del punt (0,0,0) d'aquest nivell - + An optional description for this component Una descripció opcional per aquest component - + An optional tag for this component Una etiqueta opcional per a aquest component - + The shape of this object La forma d'aquest objecte @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object El gruix de la línia d'aquest objecte @@ -1664,8 +1664,8 @@ El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra @@ -1675,8 +1675,8 @@ El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text @@ -2339,23 +2339,23 @@ - + Length Longitud - + Width Amplària - + Height Alçària @@ -2387,8 +2387,8 @@ Aquesta malla no és un sòlid vàlid. - + Facemaker returned an error El generador de cares ha retornat un error. @@ -2500,8 +2500,8 @@ Fet - + Couldn't compute a shape No s'ha pogut calcular la forma. @@ -2768,21 +2768,21 @@ Tria el seleccionat - + - + Remove Elimina - - + + Add Afegeix @@ -2935,9 +2935,9 @@ Floor creation aborted. Seleccioneu com a mínim un eix - + Axes Eixos @@ -2952,8 +2952,8 @@ Floor creation aborted. Encavallada - + Please select only one base object or none Seleccioneu només un objecte base o cap @@ -3005,10 +3005,10 @@ Floor creation aborted. Etiqueta - - + + Error: Couldn't determine character encoding Error: no s'ha pogut determinar la codificació de caràcters @@ -3026,8 +3026,8 @@ Floor creation aborted. - + Please select a base object Seleccioneu un objecte base @@ -3640,9 +3640,9 @@ Site creation aborted. Exporta a format CSV - + Description Descripció @@ -3657,8 +3657,8 @@ Site creation aborted. Total - + Export CSV File Exporta el fitxer CSV @@ -3726,16 +3726,16 @@ Site creation aborted. - + Value Valor - + Unit Unitat diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 96be53f532..d2c48aa8ee 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Délka tohoto prvku, není-li založena na profilu - + The width of this element, if not based on a profile Šířka tohoto prvku, není-li založena na profilu @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normálový směr vytažení tohoto objektu (pro (0,0,0) automatická normála) - + The structural nodes of this element Konstrukční uzly tohoto prvku @@ -135,8 +135,8 @@ Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object Typ plochy použitý pro sestavení profilu tohoto objektu @@ -425,14 +425,14 @@ The number of the wire that defines the hole. A value of 0 means automatic - + The height of this object Výška tohoto objektu - + The computed floor area of this floor Vypočtená půdorysná plocha @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Typ tohoto sestavení @@ -956,8 +956,8 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -1147,20 +1147,20 @@ The level of the (0,0,0) point of this level - + An optional description for this component Volitelný popis pro tuto komponentu - + An optional tag for this component Volitelný tag pro tuto komponentu - + The shape of this object The shape of this object @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object The line width of this object @@ -1664,8 +1664,8 @@ Text, který se má zobrazit. Použij $area, $label, $tag, $floor, $walls, $ceiling pro vložení příslušných údajů - + The name of the font Název fontu @@ -1675,8 +1675,8 @@ The color of the area text - + The size of the text font Velikost fontu @@ -2339,23 +2339,23 @@ - + Length Délka - + Width Šířka - + Height Výška @@ -2387,8 +2387,8 @@ Tato síť netvoří platné těleso - + Facemaker returned an error Facemaker returned an error @@ -2501,8 +2501,8 @@ Hotovo - + Couldn't compute a shape Nemohu vyřešit plochu @@ -2769,21 +2769,21 @@ Pick selected - + - + Remove Odstranit - - + + Add Přidat @@ -2936,9 +2936,9 @@ Floor creation aborted. Please select at least one axis - + Axes Osy @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding Chyba: Nelze určit kódování znaků @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Vyber základní objekt @@ -3641,9 +3641,9 @@ Site creation aborted. Exportovat CSV - + Description Popis @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Exportovat soubor CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Hodnota - + Unit Jednotka diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 8322230bb0..2abf1d8e1d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -95,14 +95,14 @@ Basis rotation um die Werkzeug-Achse (nur verwendet, wenn Basis Perpendikular zu Werkzeug verwendet wird) - + The length of this element, if not based on a profile Die Länge dieses Elements, wenn nicht auf einem Profil basierend - + The width of this element, if not based on a profile Die Breite dieses Elements, wenn nicht auf einem Profil basierend @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normalisierte Extrusionsrichtung dieses Objekts (behalte (0,0,0) für automatische Normale) - + The structural nodes of this element Die Strukturknoten dieses Elements @@ -135,8 +135,8 @@ Versatzabstand zwischen der Mittellinie und der Knotenlinie - + The facemaker type to use to build the profile of this object Der zu verwendende Facemaker-Typ, um das Profil dieses Objekts zu bauen @@ -425,14 +425,14 @@ Die Anzahl der Kanten, die das Loch definieren. Der Wert 0 bedeutet automatisch - + The height of this object Die Höhe dieses Objektes - + The computed floor area of this floor Die berechnete Bodenfläche dieses Bodens @@ -850,9 +850,9 @@ Die Art der Verbindung zwischen dem Ende der Treppe und der Bodenplatte im oberen Stock - + The type of this building Der Typ von diesem Gebäude @@ -956,8 +956,8 @@ Ein optionaler Abstand zwischen dem (0,0,0) Modellursprung und dem Punkt, der durch die Geokoordinaten angegeben ist - + The type of this object Der Typ dieses Objekts @@ -1147,20 +1147,20 @@ Die Ebene des (0,0,0) Punktes dieser Ebene - + An optional description for this component Eine optionale Beschreibung für diese Komponente - + An optional tag for this component Eine optionale Markierung für diese Komponente - + The shape of this object Die Form dieses Objekts @@ -1180,8 +1180,8 @@ Eine MaterialName:SolidIndexesListen-Karte, die materielle Namen mit festen Indizes enthält, die verwendet werden sollen, wenn dieses Objekt von anderen Dateien referenziert wird - + The line width of this object Die Linienbreite des Objekts @@ -1664,8 +1664,8 @@ Der zu zeigende Text. Verwenden Sie $area, $label, $tag, $floor, $walls, $ceiling, um die entsprechenden Daten einzufügen - + The name of the font Der Name der Schriftart @@ -1675,8 +1675,8 @@ Die Farbe des Bereichstextes - + The size of the text font Die Größe der Textschriftart @@ -2339,23 +2339,23 @@ - + Length Länge - + Width Breite - + Height Höhe @@ -2387,8 +2387,8 @@ Dieses Polygonnetz ist ein ungültiger Volumenkörper - + Facemaker returned an error Facemaker hat einen Fehler zurückgegeben @@ -2501,8 +2501,8 @@ Fertig - + Couldn't compute a shape Form konnte nicht berechnet werden @@ -2769,21 +2769,21 @@ Ausgewählte wählen - + - + Remove Entfernen - - + + Add Hinzufügen @@ -2936,9 +2936,9 @@ Geschosserstellung abgebrochen. Bitte wähle mindestens eine Achse - + Axes Achsen @@ -2953,8 +2953,8 @@ Geschosserstellung abgebrochen. Traverse - + Please select only one base object or none Bitte wählen Sie nur ein Basisobjekt oder keines @@ -3006,10 +3006,10 @@ Geschosserstellung abgebrochen. Bezeichnung - - + + Error: Couldn't determine character encoding Fehler: Konnte Zeichencodierung nicht bestimmen @@ -3027,8 +3027,8 @@ Geschosserstellung abgebrochen. - + Please select a base object Bitte wählen Sie ein Basisobjekt @@ -3641,9 +3641,9 @@ Seiten-Erstellung abgebrochen. Als CSV exportieren - + Description Beschreibung @@ -3658,8 +3658,8 @@ Seiten-Erstellung abgebrochen. Summe - + Export CSV File CSV-Datei exportieren @@ -3727,16 +3727,16 @@ Seiten-Erstellung abgebrochen. - + Value Wert - + Unit Einheit diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index 854c3cba51..84ba79bb4a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Το μήκος αυτού του στοιχείου, αν δεν βασίζεται σε κάποιο προφίλ - + The width of this element, if not based on a profile Το πλάτος αυτού του στοιχείου, αν δεν βασίζεται σε κάποιο προφίλ @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Η κανονική διεύθυνση επέκτασης αυτού του αντικειμένου (κρατήστε το (0,0,0) για αυτόματη κανονική επιλογή) - + The structural nodes of this element Οι δομικοί κόμβοι αυτού του στοιχείου @@ -135,8 +135,8 @@ Απόσταση μεταξύ της κεντρικής γραμμής και της γραμμής κόμβων - + The facemaker type to use to build the profile of this object Ο τύπος facemaker που θα χρησιμοποιηθεί για την δημιουργία του προφίλ αυτού του αντικειμένου @@ -425,14 +425,14 @@ Ο αριθμός του σύρματος που ορίζει την οπή. Μια τιμή 0 θα σημάνει αυτόματη επιλογή - + The height of this object Το ύψος αυτού του αντικειμένου - + The computed floor area of this floor Το υπολογισμένο εμβαδόν αυτού του ορόφου @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Ο τύπος αυτού του κτιρίου @@ -956,8 +956,8 @@ Μια προαιρετική απόσταση μεταξύ του σημείου τομής των αξόνων του μοντέλου (0,0,0) και του σημείου που υποδεικνύεται από τις γεωγραφικές συντεταγμένες - + The type of this object Ο τύπος αυτού του αντικειμένου @@ -1147,20 +1147,20 @@ Το επίπεδο του (0,0,0) σημείου αυτού του επιπέδου - + An optional description for this component Μια προαιρετική περιγραφή για αυτό το εξάρτημα - + An optional tag for this component Μια προαιρετική ετικέτα για αυτό το εξάρτημα - + The shape of this object Το σχήμα αυτού του αντικειμένου @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Το πλάτος γραμμής αυτού του αντικειμένου @@ -1664,8 +1664,8 @@ Το κείμενο προς εμφάνιση. Χρησιμοποιήστε $area, $label, $tag, $floor, $walls, $ceiling για να εισαγάγετε τα αντίστοιχα δεδομένα - + The name of the font Το όνομα της γραμματοσειράς @@ -1675,8 +1675,8 @@ Το χρώμα του κειμένου περιοχής - + The size of the text font Το μέγεθος της γραμματοσειράς κειμένου @@ -2339,23 +2339,23 @@ - + Length Μήκος - + Width Πλάτος - + Height Ύψος @@ -2387,8 +2387,8 @@ Αυτό το πλέγμα είναι ένα μη έγκυρο στερεό στοιχείο - + Facemaker returned an error Το Facemaker επέστρεψε ένα σφάλμα @@ -2501,8 +2501,8 @@ Έγινε - + Couldn't compute a shape Αδύνατος ο υπολογισμός σχήματος @@ -2769,21 +2769,21 @@ Διαλέξτε τα επιλεγμένα - + - + Remove Αφαίρεση - - + + Add Προσθήκη @@ -2936,9 +2936,9 @@ Floor creation aborted. Παρακαλώ επιλέξτε τουλάχιστον έναν άξονα - + Axes Άξονες @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Ετικέτα - - + + Error: Couldn't determine character encoding Σφάλμα: Αδύνατος ο καθορισμός της κωδικοποίησης χαρακτήρων @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Παρακαλώ επιλέξτε ένα αντικείμενο βάσης @@ -3641,9 +3641,9 @@ Site creation aborted. Εξαγάγετε CSV - + Description Περιγραφή @@ -3658,8 +3658,8 @@ Site creation aborted. Σύνολο - + Export CSV File Εξαγάγετε Αρχείο CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Τιμή - + Unit Μονάδα diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index ff6d33e0fe..f7d7ddd71f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -95,14 +95,14 @@ Base de rotación en torno del Eje X de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile El ancho de este elemento, si no está basado en un perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La dirección de extrusión normal de este objeto (mantener (0,0,0) para la normal automática) - + The structural nodes of this element Los nodos estructurales de este elemento @@ -135,8 +135,8 @@ Una distancia de separación entre la linea central y las lineas punteadas - + The facemaker type to use to build the profile of this object El tipo Facemaker se usa para construir el perfil de este objeto @@ -425,14 +425,14 @@ El número del cable que define el agujero. Un valor de 0 significa automático - + The height of this object La altura de este objeto - + The computed floor area of this floor El área computada de este piso @@ -850,9 +850,9 @@ El tipo de conexión entre el final de las escaleras y la losa de la planta superior - + The type of this building El tipo de este edificio @@ -956,8 +956,8 @@ Un desplazamiento opcional entre el origen del modelo (0,0,0) y el punto indicado por las coordenadas geográficas - + The type of this object La tipo de este objeto @@ -1147,20 +1147,20 @@ El nivel del punto (0,0,0) de este nivel - + An optional description for this component Una descripción opcional para este componente - + An optional tag for this component Una etiqueta opcional para este componente - + The shape of this object La forma de este objeto @@ -1180,8 +1180,8 @@ Un mapa MaterialName:SolidIndexesList que relaciona nombres de materiales con índices de sólido a ser usado al referenciar este objeto desde otros archivos - + The line width of this object El ancho de la linea de este objeto @@ -1664,8 +1664,8 @@ El texto a mostrar. Utilizar $area, $label, $tag, $floor, $walls, $ceiling para insertar los datos correspondientes - + The name of the font El nombre de la fuente @@ -1675,8 +1675,8 @@ El color del área de texto - + The size of the text font El tamaño de la fuente de texto @@ -2339,23 +2339,23 @@ - + Length Longitud - + Width Ancho - + Height Altura @@ -2387,8 +2387,8 @@ Esta malla es un sólido no válido - + Facemaker returned an error Facemaker devolvió un error @@ -2501,8 +2501,8 @@ Hecho - + Couldn't compute a shape No se pudo procesar una figura @@ -2769,21 +2769,21 @@ Elegir lo seleccionado - + - + Remove Eliminar - - + + Add Agregar @@ -2936,9 +2936,9 @@ Creación de piso cancelada. Por favor seleccione al menos un eje - + Axes Ejes @@ -2953,8 +2953,8 @@ Creación de piso cancelada. Reticulado - + Please select only one base object or none Por favor, escoja solo un objeto base o ninguno @@ -3006,10 +3006,10 @@ Creación de piso cancelada. Etiqueta - - + + Error: Couldn't determine character encoding Error: No se pudo determinar la codificación de caracteres @@ -3027,8 +3027,8 @@ Creación de piso cancelada. - + Please select a base object Por favor, seleccione un objeto base @@ -3641,9 +3641,9 @@ Creación del sitio abortada. Exportar CSV - + Description Descripción @@ -3658,8 +3658,8 @@ Creación del sitio abortada. Total - + Export CSV File Exportar archivo CSV @@ -3727,16 +3727,16 @@ Creación del sitio abortada. - + Value Valor - + Unit Unidad diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index eaf4752df4..00f2400d8a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -95,14 +95,14 @@ Base de rotación en torno del Eje X de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para normal automática) - + The structural nodes of this element Los nodos estructurales de este elemento @@ -135,8 +135,8 @@ Una distancia de separación entre la linea central y las lineas punteadas - + The facemaker type to use to build the profile of this object El tipo facemaker se usa para construir el perfil de este objeto @@ -425,14 +425,14 @@ El número del cable que define el agujero. Un valor de 0 significa automático - + The height of this object La altura de este objeto - + The computed floor area of this floor La superficie calculada para este piso @@ -850,9 +850,9 @@ El tipo de conexión entre el final de las escaleras y la losa de la planta superior - + The type of this building Tipo de este edificio @@ -956,8 +956,8 @@ Un desplazamiento opcional entre el origen del modelo (0,0,0) y el punto indicado por las coordenadas geográficas - + The type of this object La tipo de este objeto @@ -1147,20 +1147,20 @@ El nivel del punto (0,0,0) de este nivel - + An optional description for this component Una descripción opcional para este componente - + An optional tag for this component Una etiqueta opcional para este componente - + The shape of this object La forma de este objeto @@ -1180,8 +1180,8 @@ Un mapa MaterialName:SolidIndexesList que relaciona nombres de materiales con índices de sólido a ser usado al referenciar este objeto desde otros archivos - + The line width of this object El ancho de la linea de este objeto @@ -1664,8 +1664,8 @@ El texto a mostra. Utilizar $area, $label, $tag, $floor, $walls, $ceiling para insertar los datos correspondientes - + The name of the font El nombre de la fuente @@ -1675,8 +1675,8 @@ El color del área de texto - + The size of the text font El tamaño de la fuente de texto @@ -2339,23 +2339,23 @@ - + Length Longitud - + Width Ancho - + Height Altura @@ -2387,8 +2387,8 @@ Esta malla es un sólido no válido - + Facemaker returned an error Facemaker devolvió un error @@ -2501,8 +2501,8 @@ Hecho - + Couldn't compute a shape No se pudo procesar una figura @@ -2769,21 +2769,21 @@ Elegir lo seleccionado - + - + Remove Quitar - - + + Add Añadir @@ -2936,9 +2936,9 @@ Creación de piso cancelada. Por favor seleccione al menos un eje - + Axes Ejes @@ -2953,8 +2953,8 @@ Creación de piso cancelada. Estructura Truss - + Please select only one base object or none Por favor, escoja solo un objeto base o ninguno @@ -3006,10 +3006,10 @@ Creación de piso cancelada. Etiqueta - - + + Error: Couldn't determine character encoding Error: No se pudo determinar la codificación de caracteres @@ -3027,8 +3027,8 @@ Creación de piso cancelada. - + Please select a base object Por favor, seleccione un objeto base @@ -3641,9 +3641,9 @@ Creación del sitio abortada. Exportar CSV - + Description Descripción @@ -3658,8 +3658,8 @@ Creación del sitio abortada. Total - + Export CSV File Exportar archivo CSV @@ -3727,16 +3727,16 @@ Creación del sitio abortada. - + Value Valor - + Unit Unidad diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index e7d7ed9313..81b2f5e85b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -95,14 +95,14 @@ Oinarriaren biraketa tresna-ardatzaren inguruan (BasePerpendicularToTool egia bada soilik erabilia) - + The length of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago - + The width of this element, if not based on a profile Elementu honen luzera, profil batean oinarrituta ez badago @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Objektu honen estrusio-norabide normala (mantendu (0,0,0) normal automatikorako) - + The structural nodes of this element Elementu honen egiturazko nodoak @@ -135,8 +135,8 @@ Erdiko lerroaren eta nodo-lerroen arteko desplazamendu-distantzia - + The facemaker type to use to build the profile of this object Objektu honen profila eraikitzeko erabiliko den aurpegi-sortzailearen mota @@ -425,14 +425,14 @@ Zuloa definitzen duen alanbrearen zenbakia. 0 balioak automatikoa esan nahi du - + The height of this object Objektu honen altuera - + The computed floor area of this floor Solairu honetan kalkulatutako zoru-area @@ -850,9 +850,9 @@ Eskailera-amaieraren eta goiko solairuaren xaflaren arteko konexio mota - + The type of this building Eraikin honen mota @@ -956,8 +956,8 @@ Ereduaren (0,0,0) jatorriaren eta geokoordinatuek adierazten duten puntuaren arteko aukerako desplazamendu bat - + The type of this object Objektu honen mota @@ -1147,20 +1147,20 @@ Maila honetako (0,0,0) puntuaren maila - + An optional description for this component Osagai honen aukerako deskribapen bat - + An optional tag for this component Osagai honentzako aukerako etiketa bat - + The shape of this object Objektu honen forma @@ -1180,8 +1180,8 @@ Materialen izenak eta objektu honi beste fitxategi batzuetatik erreferentzia egiten zaionean erabiliko diren solido-indizeak erlazionatzen dituen MaterialName:SolidIndexesList mapa bat - + The line width of this object Objektu honen lerro-zabalera @@ -1664,8 +1664,8 @@ Erakutsiko den testua. Erabili $area, $label, $tag, $floor, $walls, $ceiling bakoitzari dagokion datua txertatzeko - + The name of the font Letra-tipoaren izena @@ -1675,8 +1675,8 @@ Area-testuaren kolorea - + The size of the text font Testuaren letra-tamaina @@ -2339,23 +2339,23 @@ - + Length Luzera - + Width Zabalera - + Height Altuera @@ -2387,8 +2387,8 @@ Amaraun hau solido baliogabea da - + Facemaker returned an error Aurpegi-sortzaileak errorea eman du @@ -2501,8 +2501,8 @@ Egina - + Couldn't compute a shape Ezin izan da forma bat kalkulatu @@ -2769,21 +2769,21 @@ Hartu hautatua - + - + Remove Kendu - - + + Add Gehitu @@ -2936,9 +2936,9 @@ Floor creation aborted. Hautatu gutxienez ardatz bat - + Axes Ardatzak @@ -2953,8 +2953,8 @@ Floor creation aborted. Zurajea - + Please select only one base object or none Hautatu oinarri-objektu bakar bat edo bat ere ez @@ -3006,10 +3006,10 @@ Floor creation aborted. Etiketa - - + + Error: Couldn't determine character encoding Errore: Karaktere kodeketa ezin da zehaztu @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Hautatu oinarri-objektu bat @@ -3641,9 +3641,9 @@ Gunearen sorrera utzi egin da. Esportatu CSVa - + Description Deskribapena @@ -3658,8 +3658,8 @@ Gunearen sorrera utzi egin da. Totala - + Export CSV File Esportatu CSV fitxategia @@ -3727,16 +3727,16 @@ Gunearen sorrera utzi egin da. - + Value Balioa - + Unit Unitatea diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index cb20dd6dd1..8fafa0aeee 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Tämän elementin pituus, jos se ei perustu profiiliin - + The width of this element, if not based on a profile Tämän elementin leveys, jos se ei perustu profiiliin @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Tämän objektin normaali puristussuunta (pidä (0,0,0) jos haluat normaalin suunnan määräytyvän automaattisesti) - + The structural nodes of this element Tämän elementin rakenteelliset solmupisteet @@ -135,8 +135,8 @@ Siirtymän etäisyys keskilinjan ja solmukohtien välisen linjan välillä - + The facemaker type to use to build the profile of this object Näkymäpinnan tyyppi, jota käytetään tämän kohteen profiiliin @@ -425,14 +425,14 @@ Reikää määrittävän lankojen lukumäärä. Arvo 0 tarkoittaa automaattista määrittelyä - + The height of this object Tämän kohteen korkeus - + The computed floor area of this floor Laskettu lattia-ala tässä kerrospohjassa @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Tämän rakennuksen tyyppi @@ -956,8 +956,8 @@ Valinnainen siirtymä mallin (0,0,0) alkuperän ja geokoordinaattien osoittaman paikan välillä - + The type of this object Tämän objektin tyyppi @@ -1147,20 +1147,20 @@ Tämän tason (0,0,0) taso - + An optional description for this component Valinnainen kuvaus tälle komponentille - + An optional tag for this component Valinnainen tunniste tälle osalle - + The shape of this object Tämän objektin muoto @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Tämän objektin viivan leveys @@ -1664,8 +1664,8 @@ Näytettävä teksti. Käytä $area, $label, $tag, $floor, $walls, $ceiling lisätäksesi vastaavat tiedot - + The name of the font Fontin nimi @@ -1675,8 +1675,8 @@ Alueen tekstin väri - + The size of the text font Tekstin kirjaimiston koko @@ -2339,23 +2339,23 @@ - + Length Pituus - + Width Leveys - + Height Korkeus @@ -2387,8 +2387,8 @@ Tämä verkkopinta ei ole monitahokas - + Facemaker returned an error Facemaker returned an error @@ -2501,8 +2501,8 @@ Valmis - + Couldn't compute a shape Ei voitu laskea muotoa @@ -2769,21 +2769,21 @@ Pick selected - + - + Remove Poista - - + + Add Lisää @@ -2936,9 +2936,9 @@ Floor creation aborted. Please select at least one axis - + Axes Akselit @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding Virhe: Käytettyä merkistökoodausta ei pystytä tunnistamaan @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Valitse peruskohde @@ -3641,9 +3641,9 @@ Site creation aborted. Vie CSV - + Description Kuvaus @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Vie CSV-tiedosto @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Arvo - + Unit Yksikkö diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.ts b/src/Mod/Arch/Resources/translations/Arch_fil.ts index 4474db02f7..29f6b37c64 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fil.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fil.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Ang haba ng elementong ito, ay kung hindi naka base sa propayl - + The width of this element, if not based on a profile Ang lapad ng elementong ito, kung hindi naka base sa profile @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ang normal na direksyon ng extrusion ng bagay na ito (keep (0,0,0) para sa automatic normal) - + The structural nodes of this element Ang estruktural node ng elementong ito @@ -135,8 +135,8 @@ I-offset ang distansya sa pagitan ng centerline at node line - + The facemaker type to use to build the profile of this object Ang uri ng facemaker na gagamitin para sa pagbuo ng profile ng bagay na ito @@ -425,14 +425,14 @@ Ang bilang ng kawad na tumutukoy sa butas. Ang isang halaga ng 0 ay nangangahulugang awtomatiko - + The height of this object Ang taas ng bagay na ito - + The computed floor area of this floor Ang nakalkulang kabuuang sukat ng sahig ng palapag na ito @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Ang uri ng pagbuo @@ -956,8 +956,8 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -1147,20 +1147,20 @@ The level of the (0,0,0) point of this level - + An optional description for this component Opsyonal na paglalarawan sa bahaging ito - + An optional tag for this component Opsyonal na tag para sa bahaging ito - + The shape of this object The shape of this object @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object The line width of this object @@ -1664,8 +1664,8 @@ Ang teksto upang ipakita ay. Gamitin ang $area, $label, $tag, $floor, $walls, $ceiling upang ipasok ang kani kanilang datus - + The name of the font Ang pangalan ng titik @@ -1675,8 +1675,8 @@ Ang kulay ng lugar ng teksto - + The size of the text font Ang sukat ng teksto ng titik @@ -2339,23 +2339,23 @@ - + Length Haba - + Width Lapad - + Height Taas @@ -2387,8 +2387,8 @@ Ang matang ito ay imbalidong solido - + Facemaker returned an error Ang taga-ayos na nagbalik ng mali @@ -2501,8 +2501,8 @@ Tapos na - + Couldn't compute a shape Hindi makwenta ang isang hugis @@ -2769,21 +2769,21 @@ Pumili ng napili - + - + Remove Ihiwalay - - + + Add Magdugtong @@ -2936,9 +2936,9 @@ Floor creation aborted. Please select at least one axis - + Axes Palakol @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Magtanda - - + + Error: Couldn't determine character encoding Mali: Hindi matukoy ang karakter ng pagkakainkowd @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Pakiusap pumili ng isa sa mga patungan ng bagay @@ -3641,9 +3641,9 @@ Site creation aborted. -I-luwas ang CSV - + Description Paglalarawan @@ -3658,8 +3658,8 @@ Site creation aborted. Kabuuan - + Export CSV File Mga padala ng mga CSV sa hanay @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Halaga - + Unit Unit diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 5269a03d17..c80371265e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -95,14 +95,14 @@ Rotation de la base autour de l'axe outil (utilisé uniquement si BasePerpendicularToTool est vrai) - + The length of this element, if not based on a profile La longueur de cet élément, si il n'est pas basé sur un profil - + The width of this element, if not based on a profile La largeur de cet élément, si il n'est pas basé sur un profil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direction d'extrusion normale de cet objet (mettre (0,0,0) pour normale automatique) - + The structural nodes of this element Les nœuds structurels de cet élément @@ -135,8 +135,8 @@ Décalage entre la ligne centrale et la ligne des nœuds - + The facemaker type to use to build the profile of this object Le type de générateur de face à utiliser pour créer le profil de cet objet @@ -425,14 +425,14 @@ Le numéro du tracé qui définit le trou. Une valeur de 0 signifie automatique - + The height of this object La hauteur de cet objet - + The computed floor area of this floor La surface de plancher calculée de cet étage @@ -850,9 +850,9 @@ Le type de connexion entre la fin de l'escalier et la dalle de l'étage supérieur - + The type of this building Le type de ce bâtiment @@ -956,8 +956,8 @@ Un décalage optionnel entre l'origine du modèle (0,0,0) et le point indiqué par les géocoordonnées - + The type of this object Le type de cet objet @@ -1147,20 +1147,20 @@ Le niveau du point (0,0,0) de cet étage - + An optional description for this component Une description facultative pour ce composant - + An optional tag for this component Une balise facultative pour ce composant - + The shape of this object La forme de cet objet @@ -1180,8 +1180,8 @@ Une liste de correspondance NomMatériau:ListeIndexsSolides qui relie les noms des matériaux aux indexs des solides à utiliser quand cet objet est référencé dans d'autres fichiers - + The line width of this object La largeur de la ligne des objets @@ -1664,8 +1664,8 @@ Le texte à afficher. Utilisez $area, $label, $tag, $floor, $walls, $ceiling pour insérer les données respectives - + The name of the font Le nom de la police @@ -1675,8 +1675,8 @@ La couleur de la zone de texte - + The size of the text font La taille de la police de texte @@ -2339,23 +2339,23 @@ - + Length Longueur - + Width Largeur - + Height Hauteur @@ -2387,8 +2387,8 @@ Ce maillage n'est pas un solide valide - + Facemaker returned an error FaceMaker a retouné une erreur @@ -2501,8 +2501,8 @@ Fait - + Couldn't compute a shape Forme incalculable @@ -2769,21 +2769,21 @@ Choix sélectionné - + - + Remove Enlever - - + + Add Ajouter @@ -2936,9 +2936,9 @@ La création du niveau est abandonnée. Veuillez sélectionner au moins un axe - + Axes Axes @@ -2953,8 +2953,8 @@ La création du niveau est abandonnée. Ferme - + Please select only one base object or none Veuillez sélectionner un seul objet de base ou aucun @@ -3006,10 +3006,10 @@ La création du niveau est abandonnée. Étiquette - - + + Error: Couldn't determine character encoding Erreur : impossible de déterminer l'encodage de caractères @@ -3027,8 +3027,8 @@ La création du niveau est abandonnée. - + Please select a base object Veuillez sélectionner un objet de base @@ -3640,9 +3640,9 @@ La création du site est abandonnée. Exporter CSV - + Description Description @@ -3657,8 +3657,8 @@ La création du site est abandonnée. Total - + Export CSV File Exporter vers un fichier CSV @@ -3726,16 +3726,16 @@ La création du site est abandonnée. - + Value Valeur - + Unit Unité diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index 902a83e1d4..af7d47701d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile A lonxitude deste elemento, se non está baseado nun perfil - + The width of this element, if not based on a profile A largura deste elemento, se non está baseado nun perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A dirección de extrusión normal deste obxecto (manter (0,0,0) para normal automática) - + The structural nodes of this element Os nós estruturais deste elemento @@ -135,8 +135,8 @@ Distancia de separación entre a liña central e a liña de nós - + The facemaker type to use to build the profile of this object O tipo de facedor de caras para usar na construción do perfil deste proxecto @@ -425,14 +425,14 @@ O número de arames que define o burato. Un valor de 0 significa automático - + The height of this object A altura deste obxecto - + The computed floor area of this floor A área de chan calculada para este andar @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building O tipo desta construción @@ -956,8 +956,8 @@ Desprazamento opcional entre a orixe (0,0,0) mais o punto indicado por xeo-coordenadas - + The type of this object O tipo deste obxecto @@ -1147,20 +1147,20 @@ O nivel do punto (0,0,0) deste nivel - + An optional description for this component Unha descrición opcional para este compoñente - + An optional tag for this component Unha etiqueta opcional para este compoñente - + The shape of this object A forma desde obxecto @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Largura da lixa desde obxecto @@ -1664,8 +1664,8 @@ O texto para amosar. Use $area, $label, $tag, $floor, $walls, $ceiling para introducir os datos respectivos - + The name of the font O nome da fonte @@ -1675,8 +1675,8 @@ A cor da área de texto - + The size of the text font O tamaño da fonte do texto @@ -2339,23 +2339,23 @@ - + Length Lonxitude - + Width Largura - + Height Altura @@ -2387,8 +2387,8 @@ Esta malla é un sólido non válido - + Facemaker returned an error O facedor de caras devolveu un erro @@ -2501,8 +2501,8 @@ Feito - + Couldn't compute a shape Non foi posíbel calcular unha forma @@ -2769,21 +2769,21 @@ Elixir o escolmado - + - + Remove Rexeitar - - + + Add Engadir @@ -2936,9 +2936,9 @@ Floor creation aborted. Por favor escolma polo menos un eixo - + Axes Eixos @@ -2953,8 +2953,8 @@ Floor creation aborted. Armadura - + Please select only one base object or none Escolla só un obxecto base ou ningún @@ -3006,10 +3006,10 @@ Floor creation aborted. Etiqueta - - + + Error: Couldn't determine character encoding Erro: Non se puido determinar a codificación de caracteres @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Por favor, escolme un obxecto base @@ -3641,9 +3641,9 @@ Site creation aborted. Exportar CSV - + Description Descrición @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Exportar ficheiro CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Valor - + Unit Unidade diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 44f6241490..f204455d04 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -99,14 +99,14 @@ Rotacija osnove oko osi alata (koristi se samo ako je OsnovaOkomitoNaAlat Istina) - + The length of this element, if not based on a profile Dužina ovog elementa, ako se ne temelji na profilu - + The width of this element, if not based on a profile Širina ovog elementa, ako se ne temelji na profilu @@ -117,14 +117,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Smjer normalnog istiskivanja objekta (zadrži (0,0,0) za automatsko normalno) - + The structural nodes of this element Strukturni čvorovi ovog elementa @@ -139,8 +139,8 @@ Udaljenost od centralne linije i čvora - + The facemaker type to use to build the profile of this object Vrsta dotjeravanja izgleda, koristi se za izgradnju profila ovog objekta @@ -429,14 +429,14 @@ Broj profila koji definiraju otvore. Vrijednost 0 je podrazumijevana - + The height of this object Visina ovog objekta - + The computed floor area of this floor izracun poda i povrsine poda @@ -866,9 +866,9 @@ Vrsta veze između kraja stepenica i gornje ploče etaže - + The type of this building Vrsta ove zgrade @@ -972,8 +972,8 @@ Opcionalni pomak između porijekla modela (0,0,0) i mjesta označenog na geokoordinatama - + The type of this object Tip ovog objekta @@ -1176,20 +1176,20 @@ Nivo (0,0,0) točke ovog Nivoa - + An optional description for this component Dodatni opis komponente - + An optional tag for this component Neobavezna oznaka za ovu komponentu - + The shape of this object Oblik ovog objekta @@ -1210,8 +1210,8 @@ - + The line width of this object Debljina linije ovog objekta @@ -1701,8 +1701,8 @@ Tekst za prikaz. Koristi $area, $label, $tag, $floor, $walls, $ceiling za umetanje odgovarajućih podataka - + The name of the font Ime pisma @@ -1712,8 +1712,8 @@ Boja područja teksta - + The size of the text font Veličina pisma teksta @@ -2377,23 +2377,23 @@ - + Length Dužina - + Width Širina - + Height Visina @@ -2425,8 +2425,8 @@ Ova mreža nije ispravno tijelo - + Facemaker returned an error Graditelj lica je vratio pogrešku @@ -2539,8 +2539,8 @@ Gotovo - + Couldn't compute a shape Oblik se nije mogao izračunati @@ -2809,21 +2809,21 @@ Pokupi odabrano - + - + Remove Ukloniti - - + + Add Dodaj @@ -2978,9 +2978,9 @@ Floor creation aborted. Molimo odaberite najmanje jednu os - + Axes Osi @@ -2995,8 +2995,8 @@ Floor creation aborted. Poprečna greda - + Please select only one base object or none Odaberite samo jedan osnovni objekt ili nijedan @@ -3048,10 +3048,10 @@ Floor creation aborted. Oznaka - - + + Error: Couldn't determine character encoding Greška: Nije moguće odrediti način enkodiranja @@ -3069,8 +3069,8 @@ Floor creation aborted. - + Please select a base object Odaberite osnovni objekt @@ -3691,9 +3691,9 @@ Site creation aborted. Izvoz CSV - + Description Opis @@ -3708,8 +3708,8 @@ Site creation aborted. Ukupno - + Export CSV File Izvoz CSV datoteke @@ -3777,16 +3777,16 @@ Site creation aborted. - + Value Vrijednost - + Unit Jedinica diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 9103d450bd..7f9cd50f14 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -95,14 +95,14 @@ Alap forgás a szerszámtengely körül (csak akkor használható, ha a BasePerpendicularTool igaz) - + The length of this element, if not based on a profile Ennek az elemnek a hossza, ha nem profilon áll - + The width of this element, if not based on a profile Ennek az elemnek a szélessége, ha nem profilon áll @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ennek a tárgynak az alapértelmezett kihúzási iránya (automatikus alapértelmezett (0,0,0) megtartása) - + The structural nodes of this element Ennek az elemnek a szerkezeti csomópontjai @@ -135,8 +135,8 @@ A középtengely és az egyenes csomópontok közti eltolás - + The facemaker type to use to build the profile of this object Ennek az objektumnak a felület profiljához használt felületlétrehozó típus @@ -425,14 +425,14 @@ A lyukakat meghatározó dróthálók száma. A 0 érték azt jelenti, hogy automatikus - + The height of this object Ennek a tárgynak a magassága - + The computed floor area of this floor Ennek a szint területnek a számított alapterülete @@ -850,9 +850,9 @@ A lépcső vége és a felső emeleti födém közötti kapcsolat típusa - + The type of this building Ennek az épületnek a típusa @@ -956,8 +956,8 @@ A modell (0,0,0) eredetű és a geocoordináták által megjelölt pont közötti választható eltolás - + The type of this object Ennek a tárgynak a típusa @@ -1147,20 +1147,20 @@ Ennek a szintnek a (0,0,0) pont szintje - + An optional description for this component Egy lehetséges leírás ehhez az összetevőhöz - + An optional tag for this component Egy lehetséges címke ehhez az összetevőhöz - + The shape of this object Ennek a tárgynak az alakja @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList térkép, amely a tárgy más fájlokból történő hivatkozása során használandó szilárd indexű anyagnevek - + The line width of this object Ennek a tárgynak a vonalvastagsága @@ -1664,8 +1664,8 @@ A szöveg megjelenítéséhez. $area, $label, $tag, $floor, $walls, $ceiling segítségével illessze be a megfelelő adatokat - + The name of the font Betűtípus neve @@ -1675,8 +1675,8 @@ A terület szöveg színe - + The size of the text font A betűtípus mérete @@ -2339,23 +2339,23 @@ - + Length Hossz - + Width Szélesség - + Height Magasság @@ -2387,8 +2387,8 @@ A háló egy érvénytelen szilárd test - + Facemaker returned an error Felületlétrehozás hibával tért vissza @@ -2501,8 +2501,8 @@ Kész - + Couldn't compute a shape Nem tudott létrehozni alakzatot @@ -2769,21 +2769,21 @@ Véletlenszerűen kiválasztott - + - + Remove Törlés - - + + Add Hozzáad @@ -2936,9 +2936,9 @@ Szint létrehozása megszakítva. Kérlek válassz legalább egy tengelyt - + Axes Tengelyek @@ -2953,8 +2953,8 @@ Szint létrehozása megszakítva. Kereszttartó - + Please select only one base object or none Csak egy alapobjektumot jelöljön ki, vagy egyiket sem @@ -3006,10 +3006,10 @@ Szint létrehozása megszakítva. Címke - - + + Error: Couldn't determine character encoding Hiba: Nem állapítható meg a karakterkódolás @@ -3027,8 +3027,8 @@ Szint létrehozása megszakítva. - + Please select a base object Kérjük válassza ki az alap tárgyat @@ -3641,9 +3641,9 @@ Oldal létrehozás megszakítva. Exportálás CSV-be - + Description Leírás @@ -3658,8 +3658,8 @@ Oldal létrehozás megszakítva. Összesen - + Export CSV File CSV fájl exportálás @@ -3727,16 +3727,16 @@ Oldal létrehozás megszakítva. - + Value Érték - + Unit Egység diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index be0eca7b82..061415879a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Panjang elemen ini, jika tidak didasarkan pada profil - + The width of this element, if not based on a profile Lebar elemen ini, jika tidak didasarkan pada profil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Arah normal ekstrusi objek ini (tetap (0,0,0) untuk otomatis normal) - + The structural nodes of this element Struktural node elemen ini @@ -135,8 +135,8 @@ Offset jarak antara garis tengah dan garis nodes - + The facemaker type to use to build the profile of this object Tipe facemaker menggunakan untuk membangun profil objek ini @@ -425,14 +425,14 @@ Jumlah kabel yang mendefinisikan lubang. Nilai 0 berarti otomatis - + The height of this object Ketinggian objek ini - + The computed floor area of this floor Daerah dihitung lantai lantai ini @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Jenis bangunan ini @@ -956,8 +956,8 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object Tipe objek ini @@ -1147,20 +1147,20 @@ Level titik (0,0,0) dari level ini - + An optional description for this component Deskripsi opsional untuk komponen ini - + An optional tag for this component Tag opsional untuk komponen ini - + The shape of this object Bentuk dari objek ini @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Tebal gari dari objek ini @@ -1664,8 +1664,8 @@ Teks ini untuk menunjukkan penggunaan $area, $label, $tag, $floor, $walls, $ceiling untuk memasukkan data masing-masing - + The name of the font Nama font @@ -1675,8 +1675,8 @@ Warna teks area - + The size of the text font Ukuran teksnya @@ -2339,23 +2339,23 @@ - + Length Panjangnya - + Width Lebar - + Height Tinggi @@ -2387,8 +2387,8 @@ Mesh ini adalah solid yang tidak valid - + Facemaker returned an error Facemaker mengembalikan sebuah kesalahan @@ -2501,8 +2501,8 @@ Selesai - + Couldn't compute a shape Couldn't compute a shape @@ -2769,21 +2769,21 @@ Pilih yang dipilih - + - + Remove Menghapus - - + + Add Menambahkan @@ -2936,9 +2936,9 @@ Floor creation aborted. Silakan pilih setidaknya satu sumbu - + Axes Axes @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding Kesalahan: Tidak dapat menentukan character encoding @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Silahkan pilih sebuah objek dasar @@ -3641,9 +3641,9 @@ Site creation aborted. Ekspor CSV - + Description Description @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Ekspor File CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Nilai - + Unit Satuan diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index c50e86e7c6..e85c699a96 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -95,14 +95,14 @@ Rotazione di base attorno all'asse dello strumento (usata solo se BasePerpendicularToTool è Vero) - + The length of this element, if not based on a profile La lunghezza di questo elemento, se non è basato su un profilo - + The width of this element, if not based on a profile La larghezza di questo elemento, se non è basato su un profilo @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The structural nodes of this element I nodi strutturali di questo elemento @@ -135,8 +135,8 @@ Distanza di offset tra la linea centrale e la linea dei nodi - + The facemaker type to use to build the profile of this object Il tipo di Crea facce da utilizzare per creare il profilo di questo oggetto @@ -425,14 +425,14 @@ Il numero del profilo che definisce il foro. Il valore 0 indica automatico - + The height of this object L'altezza di questo oggetto - + The computed floor area of this floor La superficie del piano calcolata per questo piano @@ -850,9 +850,9 @@ Tipo di collegamento tra la fine delle scale e la soletta del piano superiore - + The type of this building Tipo di edificio @@ -956,8 +956,8 @@ Un offset facoltativo tra l'origine del modello (0, 0,0) e il punto indicato dalle coordinate geografiche - + The type of this object La forma di questo oggetto @@ -1147,20 +1147,20 @@ Il livello del punto (0, 0,0) di questo livello - + An optional description for this component Descrizione facoltativa per questo componente - + An optional tag for this component Tag opzionale per questo componente - + The shape of this object La forma di questo oggetto @@ -1180,8 +1180,8 @@ Una lista di corrispondenza MaterialName:SolidIndexesList che collega nomi materiali con indici solidi da usare quando si fa riferimento a questo oggetto da altri file - + The line width of this object Lo spessore della linea di questo oggetto @@ -1664,8 +1664,8 @@ Testo da mostrare. Per inserire i rispettivi dati utilizzare $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Il nome del font @@ -1675,8 +1675,8 @@ Colore del testo per la zona - + The size of the text font La dimensione del font di testo @@ -2339,23 +2339,23 @@ - + Length Lunghezza - + Width Larghezza - + Height Altezza @@ -2387,8 +2387,8 @@ Questa mesh non è un solido valido - + Facemaker returned an error FaceMaker ha restituito un errore @@ -2501,8 +2501,8 @@ Fatto - + Couldn't compute a shape Non è possibile computare una forma @@ -2769,21 +2769,21 @@ Usa selezionata - + - + Remove Rimuovi - - + + Add Aggiungi @@ -2936,9 +2936,9 @@ Creazione del Pavimento interrotta. Selezionare almeno un asse - + Axes Assi @@ -2953,8 +2953,8 @@ Creazione del Pavimento interrotta. Travatura - + Please select only one base object or none Si prega di selezionare un solo oggetto base o nessuno @@ -3006,10 +3006,10 @@ Creazione del Pavimento interrotta. Etichetta - - + + Error: Couldn't determine character encoding Errore: impossibile determinare la codifica dei caratteri @@ -3027,8 +3027,8 @@ Creazione del Pavimento interrotta. - + Please select a base object Selezionare un oggetto base @@ -3641,9 +3641,9 @@ Creazione del Sito interrotta. Esporta CSV - + Description Descrizione @@ -3658,8 +3658,8 @@ Creazione del Sito interrotta. Totale - + Export CSV File Esporta file CSV @@ -3727,16 +3727,16 @@ Creazione del Sito interrotta. - + Value Valore - + Unit Unità diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index 319e031758..5ad146b15c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile プロファイルに基づいていない場合、この要素の長さ - + The width of this element, if not based on a profile プロファイルに基づいていない場合、この要素の幅 @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) このオブジェクトの法線押し出し方向（法線自動設定を行う場合は（0,0,0）のままにしてください） - + The structural nodes of this element この要素の構造ノード @@ -135,8 +135,8 @@ 中心線と節点ラインの間のオフセット距離 - + The facemaker type to use to build the profile of this object このオブジェクトのプロファイル構築で使用するフェイスメーカーの種類 @@ -425,14 +425,14 @@ 穴を定義するワイヤーの数。値0の場合は自動になります。 - + The height of this object オブジェクトの高さ - + The computed floor area of this floor フロアの床面積の計算 @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building ビルディングタイプ @@ -956,8 +956,8 @@ モデル原点 (0, 0, 0) と塵座標によって表される点との間のオプションオフセット距離 - + The type of this object このオブジェクトのタイプ @@ -1147,20 +1147,20 @@ レベルの (0,0,0) 点レベル - + An optional description for this component コンポーネントのオプション説明 - + An optional tag for this component コンポーネントのオプション・タグ - + The shape of this object オブジェクトの形 @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object オブジェクトの線幅 @@ -1664,8 +1664,8 @@ 表示されるテキスト。$area、$label、$tag、$floor、$walls、$ceilingを使用して各データを挿入してください。 - + The name of the font フォントの名前 @@ -1675,8 +1675,8 @@ エリアの文字色 - + The size of the text font テキストフォントのサイズ @@ -2339,23 +2339,23 @@ - + Length 長さ - + Width 幅 - + Height 高さ @@ -2387,8 +2387,8 @@ このメッシュは無効なソリッドです - + Facemaker returned an error フェイスメーカーがエラーを返しました。 @@ -2501,8 +2501,8 @@ 終了 - + Couldn't compute a shape シェイプを計算できません @@ -2769,21 +2769,21 @@ ピック選択 - + - + Remove 削除 - - + + Add 追加 @@ -2936,9 +2936,9 @@ Floor creation aborted. 少なくとも1つの軸を選択してください - + Axes 軸 @@ -2953,8 +2953,8 @@ Floor creation aborted. トラス - + Please select only one base object or none ベースオブジェクトを1つだけ選択するか、何も選択しないでください。 @@ -3006,10 +3006,10 @@ Floor creation aborted. ラベル - - + + Error: Couldn't determine character encoding エラー: 文字エンコーディングが判別できませんでした @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object ベース オブジェクトを選択してください @@ -3641,9 +3641,9 @@ Site creation aborted. CSVをエクスポート - + Description 説明 @@ -3658,8 +3658,8 @@ Site creation aborted. 合計 - + Export CSV File CSVファイルをエクスポート @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value 値 - + Unit 単位 diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts index 7209882115..bd546e5c2e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ka.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts @@ -95,14 +95,14 @@ ბაზის მოტრიალება ხელსაწყოს ღერძის გარშემო (გამოიყენება მხოლოდ თუ BasePerpendicularToTool დაყენებულია "True"-ზე) - + The length of this element, if not based on a profile ამ ელემენტის სიგრძე, თუ არ არის დაფუძნებული პროფილზე - + The width of this element, if not based on a profile ამ ელემენტის სიგანე, თუ არ არის დაფუძნებული პროფილზე @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) ამ ობიექტის ნორმალის გამოწნეხვის მიმართულება (ავტომატური ნორმალისთვის დატოვეთ (0,0,0)) - + The structural nodes of this element ამ ელემენტის სტრუქტურული კვანძები @@ -135,8 +135,8 @@ ცენტრალურ ხაზსა და საკვანძო ხაზს შორის წანაცვლებული მანძილი - + The facemaker type to use to build the profile of this object ობიექტის პროფილის შესაქმნელად გამოსაყენებელი facemaker-ის ტიპი @@ -431,14 +431,14 @@ პოლიხაზების რაოდენობა, რომელიც განსაზღვრავს ხვრელს. მნიშვნელობა 0 ნიშნავს ავტომატურს - + The height of this object ობიექტის სიმაღლე - + The computed floor area of this floor სართულის გამოთვლილი ფართობი @@ -856,9 +856,9 @@ ზედა ფილისა და კიბის დასასრულს შორის კავშირის ტიპი - + The type of this building შენობის ტიპი @@ -962,8 +962,8 @@ არასავალდებულო წანაცვლება მოდელის (0,0,0) საწყისსა და გეოკოორდინატებით მითითებულ წერტილს შორის - + The type of this object ობიექტის ტიპი @@ -1153,20 +1153,20 @@ ამ დონის (0,0,0) წერტილის დონე - + An optional description for this component კომპონენტის არააუცილებელი აღწერა - + An optional tag for this component კომპონენტის არააუცილებელი ჭდე - + The shape of this object ობიექტის ფორმა @@ -1186,8 +1186,8 @@ MaterialName:SolidIndexesList რუკა, რომელიც აკავშირებს მასალის სახელებს მყარ ინდექსებთან, რომლებიც გამოყენებული იქნება ამ ობიექტზე სხვა ფაილებიდან მიბმისას - + The line width of this object ამ ობიექტის ხაზის სიგანე @@ -1670,8 +1670,8 @@ საჩვენებელი ტექსტი. გამოიყენეთ ცვლადები $area, $label, $tag, $floor, $walls და $ceiling შესაბამისი მონაცემების ჩასასმელად - + The name of the font ფონტის სახელი @@ -1681,8 +1681,8 @@ მონიშნული ტექსტის ფერი - + The size of the text font ფონტის ზომა @@ -2345,23 +2345,23 @@ - + Length სიგრძე - + Width სიგანე - + Height სიმაღლე @@ -2393,8 +2393,8 @@ ეს პოლიხაზი არ წარმოადგენს შეკრულ სხეულს - + Facemaker returned an error Facemaker-მა დააბრუნა შეცდომა @@ -2507,8 +2507,8 @@ მზადაა - + Couldn't compute a shape ფიგურის გამოთვლის შეცდომა @@ -2775,21 +2775,21 @@ მონიშნულის მითითება - + - + Remove მოცილება - - + + Add დამატება @@ -2942,9 +2942,9 @@ Floor creation aborted. აირჩიეთ ერთი ღერძი მაინც - + Axes ღერძები @@ -2959,8 +2959,8 @@ Floor creation aborted. ფერმა - + Please select only one base object or none გთხოვთ, აირჩიოთ მხოლოდ ერთი საბაზისო ობიექტი ან არცერთი @@ -3012,10 +3012,10 @@ Floor creation aborted. ჭდე - - + + Error: Couldn't determine character encoding შეცდომა: სიმბოლოების კოდირების დადგენა ვერ მოხერხდა @@ -3033,8 +3033,8 @@ Floor creation aborted. - + Please select a base object გთხოვთ, აირჩიოთ საბაზისო ობიექტი @@ -3647,9 +3647,9 @@ Site creation aborted. CVS-ში გატანა - + Description აღწერა @@ -3664,8 +3664,8 @@ Site creation aborted. სულ - + Export CSV File CSV ფაილის გატანა @@ -3733,16 +3733,16 @@ Site creation aborted. - + Value მნიშვნელობა - + Unit საზომი ერთეული diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.ts b/src/Mod/Arch/Resources/translations/Arch_lt.ts index 7ff19be79d..79cf796710 100644 --- a/src/Mod/Arch/Resources/translations/Arch_lt.ts +++ b/src/Mod/Arch/Resources/translations/Arch_lt.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Šio elemento ilgis, jei jis nėra ant profilio - + The width of this element, if not based on a profile Šio elemento plotis, jei jis nėra ant profilio @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Šio objekto išstūmimo krypties normalė (palikite (0,0,0) automatiniam normalės parinkimui) - + The structural nodes of this element Šį elementą sudarantys mazgai @@ -135,8 +135,8 @@ Postūmio atstumas tarp centrinės linijos ir mazgų linijos - + The facemaker type to use to build the profile of this object Sienų kūriklio, naudojamo šio objekto profiliui sukurti, rūšis @@ -425,14 +425,14 @@ Laidų kiekis nustatantis skylę. Reikšmė 0 automatinis - + The height of this object Šio objekto aukštis - + The computed floor area of this floor Apskaičiuotasis šių grindų plotas @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Šio pastato rūšis @@ -956,8 +956,8 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object The type of this object @@ -1147,20 +1147,20 @@ Taško lygis (0,0,0) šiame lygyje - + An optional description for this component Pasirinktinis šios dalies aprašas - + An optional tag for this component Pasirinktinė šios dalies žymė - + The shape of this object Šio kūno pavidalas @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Objekto linijos plotis @@ -1664,8 +1664,8 @@ Rodyti tekstą. Įterpti atitinkamus duomenis naudokite $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Šrifto pavadinimas @@ -1675,8 +1675,8 @@ Teksto pagrindo spalva - + The size of the text font Teksto šrifto dydis @@ -2339,23 +2339,23 @@ - + Length Length - + Width Plotis - + Height Aukštis @@ -2387,8 +2387,8 @@ Šis plokštumų tinklas netinkamas pilnaviduriui tūriui - + Facemaker returned an error Facemaker returned an error @@ -2501,8 +2501,8 @@ Atlikta - + Couldn't compute a shape Couldn't compute a shape @@ -2769,21 +2769,21 @@ Pick selected - + - + Remove Pašalinti - - + + Add Pridėti @@ -2936,9 +2936,9 @@ Floor creation aborted. Please select at least one axis - + Axes Ašys @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding Error: Couldn't determine character encoding @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Please select a base object @@ -3641,9 +3641,9 @@ Site creation aborted. Export CSV - + Description Aprašymas @@ -3658,8 +3658,8 @@ Site creation aborted. Viso - + Export CSV File Eksportuoti CSV formatu @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Reikšmė - + Unit Vienetas diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index 9fb8dbb8e6..86b6db8ba4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -95,14 +95,14 @@ Roteer de basis om de werkas (alleen gebruiken als BasePerpendicularToTool waar is) - + The length of this element, if not based on a profile De lengte van dit element, indien niet gebaseerd op een profiel - + The width of this element, if not based on a profile De breedte van dit element, indien niet gebaseerd op een profiel @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) De normale extrusierichting van dit opject (houd (0,0,0) voor automatische normaal) - + The structural nodes of this element De structuur knooppunten van dit element @@ -135,8 +135,8 @@ De afstand tussen de middellijn en de knooppunten-lijn - + The facemaker type to use to build the profile of this object Het type facemaker dat moet worden gebruikt om het profiel van dit object te maken @@ -425,14 +425,14 @@ Het nummer van de draad die het gat definieert. Een waarde van 0 betekent automatisch - + The height of this object De hoogte van dit object - + The computed floor area of this floor De berekende oppervlakte van deze vloer @@ -850,9 +850,9 @@ Het type verbinding tussen het einde van de trap en de bovenste vloerplaat - + The type of this building Het type van dit gebouw @@ -956,8 +956,8 @@ Een optionele offset tussen de oorsprong van het model (0,0,0) en het punt aangegeven door de geo-coördinaten - + The type of this object Het type van dit object @@ -1147,20 +1147,20 @@ Het niveau van het (0,0,0) punt van dit niveau - + An optional description for this component Een optionele omschrijving voor dit onderdeel - + An optional tag for this component Een optionele tag voor dit onderdeel - + The shape of this object De vorm van dit object @@ -1180,8 +1180,8 @@ Een MateriaalNaam:SolidIndexesList map die betrekking heeft op de materiaalnamen met een solid index om te gebruiken, als er verwijzen vanuit dit object naar andere bestanden zijn - + The line width of this object De lijnbreedte van dit object @@ -1664,8 +1664,8 @@ De tekst weergeven. Gebruik $area, $label, $tag, $floor, $walls, $ceiling om de betrokken gegevens in te voegen - + The name of the font De naam van het lettertype @@ -1675,8 +1675,8 @@ De kleur van het gebied tekst - + The size of the text font De grootte van het lettertype @@ -2339,23 +2339,23 @@ - + Length Lengte - + Width Breedte - + Height Hoogte @@ -2387,8 +2387,8 @@ Dit net vormt een ongeldig volumemodel - + Facemaker returned an error Facemaker gaf een foutmelding @@ -2500,8 +2500,8 @@ Klaar - + Couldn't compute a shape Kon geen vorm berekenen @@ -2768,21 +2768,21 @@ Neem geselecteerde - + - + Remove Verwijderen - - + + Add Toevoegen @@ -2935,9 +2935,9 @@ Floor creation aborted. Selecteer alstublieft minimaal 1 as - + Axes Assen @@ -2952,8 +2952,8 @@ Floor creation aborted. Vakwerk - + Please select only one base object or none Gelieve enkel een vlak of een basisobject te kiezen @@ -3005,10 +3005,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding Fout: Kan de tekencodering niet bepalen @@ -3026,8 +3026,8 @@ Floor creation aborted. - + Please select a base object Selecteer een basisobject @@ -3640,9 +3640,9 @@ Site creation aborted. Exporteer CSV - + Description Omschrijving @@ -3657,8 +3657,8 @@ Site creation aborted. Totaal - + Export CSV File Exporteren als CSV bestand @@ -3726,16 +3726,16 @@ Site creation aborted. - + Value Waarde - + Unit Eenheid diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index d348b3d08b..0fb2ba1fea 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -95,14 +95,14 @@ Podstawowy obrót wokół osi narzędzia (używany tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) - + The length of this element, if not based on a profile Długość tego elementu, jeśli nie w oparciu o profil - + The width of this element, if not based on a profile Szerokość tego elementu, jeśli nie w oparciu o profil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normalny kierunek wytłaczania tego obiektu (utrzymaj (0,0,0) dla typowego automatycznie) - + The structural nodes of this element Węzły konstrukcyjne tego elementu @@ -135,8 +135,8 @@ Odległość przesunięcia między linią środkową a linią węzłów - + The facemaker type to use to build the profile of this object Typ facemakera jest używany do utworzenia profilu tego obiektu @@ -425,14 +425,14 @@ Liczba odcinków polilinii, która definiuje otwór. Wartość 0 oznacza wartość automatyczną - + The height of this object Wysokość tego obiektu - + The computed floor area of this floor Obliczona powierzchnia rzutu tego piętra @@ -850,9 +850,9 @@ Typ połączenia między końcem schodów a górną podłogą - + The type of this building Typ tego budynku @@ -956,8 +956,8 @@ Opcjonalne przesunięcie między odniesieniem położenia modelu (0,0,0) a punktem wskazanym przez współrzędne geocentryczne - + The type of this object Typ tego obiektu @@ -1147,20 +1147,20 @@ Poziom koty (0,0,0) tej kondygnacji - + An optional description for this component Opcjonalny opis dla tego komponentu - + An optional tag for this component Opcjonalny znacznik dla tego komponentu - + The shape of this object Kształt tego obiektu @@ -1180,8 +1180,8 @@ Mapowanie MaterialName:SolidIndexesList wiążące nazwy materiałów z indeksami brył, które zostanie zastosowane przy tworzeniu odniesień do tego obiektu w innych plikach - + The line width of this object Grubość linii tego obiektu @@ -1664,8 +1664,8 @@ Tekst do pokazania. Użyj $area, $label, $tag, $floor, $walls, $ceiling aby wstawić odpowiednie dane - + The name of the font Nazwa czcionki @@ -1675,8 +1675,8 @@ Kolor tekstu pola powierzchni - + The size of the text font Rozmiar czcionki @@ -2339,23 +2339,23 @@ - + Length Długość - + Width Szerokość - + Height Wysokość @@ -2387,8 +2387,8 @@ Ta siatka jest niepoprawną bryłą - + Facemaker returned an error Facemaker zwrócił błąd @@ -2501,8 +2501,8 @@ Gotowe - + Couldn't compute a shape Nie można obliczyć kształtu @@ -2769,21 +2769,21 @@ Wybierz zaznaczone - + - + Remove Skasuj - - + + Add Dodaj @@ -2936,9 +2936,9 @@ Tworzenie piętra zostało przerwane. Zaznacz przynajmniej jedną oś - + Axes Osie @@ -2953,8 +2953,8 @@ Tworzenie piętra zostało przerwane. Kratownica - + Please select only one base object or none Proszę wybrać tylko jeden obiekt bazowy lub nic @@ -3006,10 +3006,10 @@ Tworzenie piętra zostało przerwane. Etykieta - - + + Error: Couldn't determine character encoding Błąd: Nie można określić standardu kodowania znaków @@ -3027,8 +3027,8 @@ Tworzenie piętra zostało przerwane. - + Please select a base object Wybierz obiekt bazowy @@ -3641,9 +3641,9 @@ Tworzenie terenu zostało przerwane. Eksportuj CSV - + Description Opis @@ -3658,8 +3658,8 @@ Tworzenie terenu zostało przerwane. Łącznie - + Export CSV File Eksportuj do pliku CSV @@ -3727,16 +3727,16 @@ Tworzenie terenu zostało przerwane. - + Value Wartość - + Unit Jednostka diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index dff6fe9e14..84f96c8963 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -95,14 +95,14 @@ Rotação da Base em torno do eixo da ferramenta (usado somente se BasePerpendicularToTool for Verdadeiro) - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado em um perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado em um perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The structural nodes of this element Os nós estruturais deste elemento @@ -135,8 +135,8 @@ A distância o eixo central e a linha de nós - + The facemaker type to use to build the profile of this object O tipo de gerador de faces a ser usado para construir o perfil deste objeto @@ -425,14 +425,14 @@ O número do arame que define o furo. Um valor de 0 significa automática - + The height of this object A altura deste objeto - + The computed floor area of this floor A área deste piso calculada @@ -850,9 +850,9 @@ O tipo de conexão entre o final da escada e a laje do chão superior - + The type of this building O tipo desta construção @@ -956,8 +956,8 @@ Um deslocamento opcional entre a origem do modelo (0,0,0) e o ponto indicado pelas coordenadas geográficas - + The type of this object O tipo deste objeto @@ -1147,20 +1147,20 @@ O nível do ponto (0,0,0) deste nível - + An optional description for this component Uma descrição opcional para este componente - + An optional tag for this component Uma etiqueta opcional para este componente - + The shape of this object A forma deste objeto @@ -1180,8 +1180,8 @@ Um mapa MaterialName:SolidIndexesList que relaciona nomes de materiais com índices sólidos a serem usados ao referenciar este objeto de outros arquivos - + The line width of this object A largura da linha deste objeto @@ -1664,8 +1664,8 @@ O texto a ser exibido. Use $area, $label, $tag, $floor, $walls, $ceiling para inserir os respectivos dados - + The name of the font O nome da fonte @@ -1675,8 +1675,8 @@ A cor do texto da área - + The size of the text font O tamanho da fonte do texto @@ -2339,23 +2339,23 @@ - + Length Comprimento - + Width Largura - + Height Altura @@ -2387,8 +2387,8 @@ Esta malha não é um sólido válido - + Facemaker returned an error O FaceMaker retornou um erro @@ -2501,8 +2501,8 @@ Feito - + Couldn't compute a shape Não foi possível calcular uma forma @@ -2769,21 +2769,21 @@ Usar seleção - + - + Remove Remover - - + + Add Adicionar @@ -2928,9 +2928,9 @@ Floor creation aborted. Por favor, selecione pelo menos um eixo - + Axes Eixos @@ -2945,8 +2945,8 @@ Floor creation aborted. Treliça - + Please select only one base object or none Por favor selecione apenas um ou nenhum objeto @@ -2998,10 +2998,10 @@ Floor creation aborted. Rótulo - - + + Error: Couldn't determine character encoding Erro: Não foi possível determinar a codificação de caracteres @@ -3019,8 +3019,8 @@ Floor creation aborted. - + Please select a base object Por favor, selecione um objeto de base @@ -3621,9 +3621,9 @@ Criação de sítio abortada. Exportar para CSV - + Description Descrição @@ -3638,8 +3638,8 @@ Criação de sítio abortada. Total - + Export CSV File Exportar um arquivo CSV @@ -3707,16 +3707,16 @@ Criação de sítio abortada. - + Value Valor - + Unit Unidade diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index 5aa270756f..33a330f84a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -95,14 +95,14 @@ Rotação base em torno do eixo da Ferramenta (usado somente se BasePerpendicularAFerramenta for Verdadeiro) - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado num perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado num perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The structural nodes of this element Os nós estruturais deste elemento @@ -135,8 +135,8 @@ A distância entre o eixo e a linha de nós - + The facemaker type to use to build the profile of this object O tipo de criador de faces (facemaker) a usar para construir o perfil deste objeto @@ -425,14 +425,14 @@ O número do traço que define o furo. Um valor de 0 significa automático - + The height of this object A altura do objeto - + The computed floor area of this floor A área calculada para este Piso (andar) @@ -850,9 +850,9 @@ O tipo de conexão entre o final da escada e a placa no chão superior - + The type of this building Tipo de edifício @@ -956,8 +956,8 @@ Um deslocamento opcional entre a origem do modelo (0, 0,0) e o ponto indicado pelas coordenadas geográficas - + The type of this object O tipo deste objeto @@ -1147,20 +1147,20 @@ A cota do ponto (0,0,0) deste nível - + An optional description for this component Uma descrição opcional para este componente - + An optional tag for this component Uma etiqueta opcional para este componente - + The shape of this object A forma deste objeto @@ -1180,8 +1180,8 @@ Um mapa MaterialName:SolidIndexesList que relaciona nomes de materiais com índices sólidos a serem usados ao referenciar este objeto de outros arquivos - + The line width of this object A largura da linha deste objeto @@ -1664,8 +1664,8 @@ Texto a ser exibido. Usar $area, $label, $tag, $floor, $walls, $ceiling para inserir os respetivos dados - + The name of the font Nome da fonte @@ -1675,8 +1675,8 @@ A cor do texto da área - + The size of the text font O tamanho da fonte do texto @@ -2339,23 +2339,23 @@ - + Length Comprimento - + Width Largura - + Height Altura @@ -2387,8 +2387,8 @@ Esta malha é um sólido inválido - + Facemaker returned an error O criador de faces retornou um erro @@ -2501,8 +2501,8 @@ Concluído - + Couldn't compute a shape Não foi possível calcular uma forma @@ -2769,21 +2769,21 @@ Usar seleção - + - + Remove Remover - - + + Add Adicionar @@ -2936,9 +2936,9 @@ Floor creation aborted. Por favor, selecione pelo menos um eixo - + Axes Eixos @@ -2953,8 +2953,8 @@ Floor creation aborted. Treliça - + Please select only one base object or none Por favor, selecione apenas um objeto de base ou nenhum @@ -3006,10 +3006,10 @@ Floor creation aborted. Rótulo - - + + Error: Couldn't determine character encoding Erro: Não foi possivel determinar a codificação de caracteres @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Por favor, selecione um objeto base @@ -3641,9 +3641,9 @@ Site creation aborted. Exportar CSV - + Description Descrição @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Exportar um ficheiro CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Valor - + Unit Unidade diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index c04f217aa6..6083f0430f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Lungimea acestui element, dacă nu este bazat pe un profil - + The width of this element, if not based on a profile Lățimea acestui element, dacă nu e bazat pe un profil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Direcția normala de extrudare a acestui obiect (păstrează (0,0,0) pentru normare automata) - + The structural nodes of this element Nodurile structurale ale acestui element @@ -135,8 +135,8 @@ Compensează distanța dintre linia centrala/axul şi linia de noduri - + The facemaker type to use to build the profile of this object Tipul de facemaker de utilizat pentru a creea profilul acestui obiect @@ -425,14 +425,14 @@ Numărul de fire care defineşte gaura. O valoare 0 înseamnă automat - + The height of this object Înălțimea acestui obiect - + The computed floor area of this floor Aria calculata a acestei podele @@ -850,9 +850,9 @@ Tipul de conexiune dintre extremitatea superioară a scărilor și etajul superior - + The type of this building Tipul contrucției @@ -956,8 +956,8 @@ Un opţional offset între originea model (0,0,0) şi punctul indicat de geocoordonates - + The type of this object Tipul acestui obiect @@ -1147,20 +1147,20 @@ Nivelul punctului (0,0,0) la acest nivel - + An optional description for this component O descriere opționala pentru aceasta componenta - + An optional tag for this component O etichetare opțională pentru aceasta componenta - + The shape of this object Forma acestui obiect @@ -1180,8 +1180,8 @@ O hartă MaterialName:SolidIndexesList care se referă la nume de materiale cu indici solizi ce vor fi utilizați la trimiterea acestui obiect din alte fișiere - + The line width of this object Lățimea liniei acestui obiect @@ -1664,8 +1664,8 @@ Textul să arate. Utilizaţi $area, $label, $tag, $floor, $walls, $ceiling pentru a insera datele respective - + The name of the font Numele fontului @@ -1675,8 +1675,8 @@ Culoarea textului din aria respectiva - + The size of the text font Dimensiunea fontului din text @@ -2339,23 +2339,23 @@ - + Length Lungime - + Width Lăţime - + Height Înălţime @@ -2387,8 +2387,8 @@ Aceasta plasă nu este un solid valid - + Facemaker returned an error FaceMaker a întors o eroare @@ -2501,8 +2501,8 @@ Gata - + Couldn't compute a shape Nu s-a putut calcula o formă @@ -2769,21 +2769,21 @@ Choix sélectionné - + - + Remove Elimină - - + + Add Adaugă @@ -2936,9 +2936,9 @@ Floor creation aborted. Te rog selecteaza macar o axă - + Axes Axe @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Etichetă - - + + Error: Couldn't determine character encoding Eroare: nu pot determina codarea caracterelor @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Selectați un obiect de bază @@ -3641,9 +3641,9 @@ Site creation aborted. Export CSV - + Description Descriere @@ -3658,8 +3658,8 @@ Site creation aborted. Total - + Export CSV File Exporta fisierul CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Valoare - + Unit Unitate diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 72aa9d66bb..3f7a07e0cd 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -95,14 +95,14 @@ Вращение базы вокруг оси инструмента (используется только если BasePerpendicularToTool равен True) - + The length of this element, if not based on a profile Длина элемента, если не определена в профиле - + The width of this element, if not based on a profile Ширина элемента, если не определена в профиле @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Направление выдавливания объекта (оставить (0,0,0) для автоматического определения) - + The structural nodes of this element Структурные узлы элемента @@ -135,8 +135,8 @@ Расстояние смещения между осевой и узловой линией - + The facemaker type to use to build the profile of this object Тип генератора граней, используемый для построения профиля объекта @@ -425,14 +425,14 @@ Количество ломанных линий, определяющих отверстие. Значение 0 означает автоматическое определение - + The height of this object Высота объекта - + The computed floor area of this floor Расчётная площадь этажа @@ -850,9 +850,9 @@ Тип связи между концом лестницы и слябом верхнего этажа. - + The type of this building Тип здания @@ -956,8 +956,8 @@ Опционально смещение между началом координат модели (0,0,0) и точкой, обозначенной геокоординатами - + The type of this object Тип этого объекта @@ -1147,20 +1147,20 @@ Уровень точки отсчета (0,0,0) этого этажа - + An optional description for this component Необязательное описание компонента - + An optional tag for this component Необязательный тэг компонента - + The shape of this object Форма этого объекта @@ -1180,8 +1180,8 @@ Карта MaterialName:SolidIndexesList, связывающая названия материалов с индексами твердых тел, которые будут использоваться при ссылке на этот объект из других файлов - + The line width of this object Ширина линий этого объекта @@ -1664,8 +1664,8 @@ Отображаемый текст. Используйте $area, $label, $tag, $floor, $walls, $ceiling для вставки соответствующих данных - + The name of the font Название шрифта @@ -1675,8 +1675,8 @@ Цвет текста в области - + The size of the text font Размер шрифта @@ -2339,23 +2339,23 @@ - + Length Длина - + Width Ширина - + Height Высота @@ -2387,8 +2387,8 @@ Эта полигональная сетка не является замкнутым объёмом - + Facemaker returned an error Генератор граней вернул ошибку @@ -2501,8 +2501,8 @@ Готово - + Couldn't compute a shape Не могу рассчитать фигуру @@ -2769,21 +2769,21 @@ Указать выбранное - + - + Remove Удалить - - + + Add Добавить @@ -2936,9 +2936,9 @@ Floor creation aborted. Пожалуйста, выберите по крайней мере одну ось - + Axes Оси @@ -2953,8 +2953,8 @@ Floor creation aborted. Ферма - + Please select only one base object or none Пожалуйста, выберите только один базовый объект или ничего @@ -3006,10 +3006,10 @@ Floor creation aborted. Метка - - + + Error: Couldn't determine character encoding Ошибка: Не удалось определить кодировку символов @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Пожалуйста, выберите базовый объект @@ -3641,9 +3641,9 @@ Site creation aborted. Экспортировать в CSV - + Description Описание @@ -3658,8 +3658,8 @@ Site creation aborted. Итог - + Export CSV File Экспортировать в CSV-файл @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Значение - + Unit Единица измерения diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 5ffa4b7231..0bea0ca290 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -95,14 +95,14 @@ Sukanje osnove okoli osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) - + The length of this element, if not based on a profile Dolžina tega elementa, ko ni povzeta iz profila - + The width of this element, if not based on a profile Širina tega elementa, ko ni povzeta iz profila @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normala smeri izrivanja tega predmeta (pustite (0,0,0) za samodejno smer) - + The structural nodes of this element Konstrukcijska vozlišča tega elementa @@ -135,8 +135,8 @@ Odmik med središčnico in črto vozlišča - + The facemaker type to use to build the profile of this object Vrsta "facemaker" uporabljena za izgradnjo profila predmeta @@ -425,14 +425,14 @@ Številka črtovja, ki določa preboj. Vrednost 0 pomeni samodejno - + The height of this object Višina tega predmeta - + The computed floor area of this floor Izračunana površina tal tega nadstropja @@ -850,9 +850,9 @@ Način stikovanja zgornje talne plošče z zaključkom stopnic - + The type of this building Vrsta zgradbe @@ -956,8 +956,8 @@ Možnost določitve odmika me izhodiščem modela (0,0,0) in točko podano v zemljepisnih sorednicah - + The type of this object Vrsta tega predmeta @@ -1147,20 +1147,20 @@ Višina točke (0,0,0) te ravni - + An optional description for this component Izbirni opis te sestavine - + An optional tag for this component Izbirna oznaka te sestavine - + The shape of this object Oblika tega objekta @@ -1180,8 +1180,8 @@ Preslikava ImeSnovi:SeznamKazalTeles, ki povezuje imena snovi s kazalom teles. Uporablja se pri sklicevanju tega predmeta z drugih datotek - + The line width of this object Debelina črt tega predmeta @@ -1664,8 +1664,8 @@ Besedilo za prikaz. Uporabi $area, $label, $tag, $floor, $walls, $ceiling za vstavitev ustreznih podatkov - + The name of the font Ime pisave besedila @@ -1675,8 +1675,8 @@ Barva besedila površine - + The size of the text font Velikost pisave besedila @@ -2339,23 +2339,23 @@ - + Length Dolžina - + Width Širina - + Height Višina @@ -2387,8 +2387,8 @@ Ta mreža je neveljavno telo - + Facemaker returned an error "Facemaker" je vrnil napako @@ -2501,8 +2501,8 @@ Končano - + Couldn't compute a shape Ni bilo možno izračunati oblike @@ -2769,21 +2769,21 @@ Izberi označeno - + - + Remove Odstrani - - + + Add Dodaj @@ -2936,9 +2936,9 @@ Floor creation aborted. Izberite vsaj eno os - + Axes Osi @@ -2953,8 +2953,8 @@ Floor creation aborted. Paličje - + Please select only one base object or none Izberite le en osnovni predmet ali nobenega @@ -3006,10 +3006,10 @@ Floor creation aborted. Oznaka - - + + Error: Couldn't determine character encoding Napaka: Ni bilo možno ugotoviti načina kodiranja znakov @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Prosim označite izhodiščni predmet @@ -3641,9 +3641,9 @@ Site creation aborted. Izvozi CSV - + Description Opis @@ -3658,8 +3658,8 @@ Site creation aborted. Skupaj - + Export CSV File Izvozi datoteko CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Vrednost - + Unit Enota diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index ad0da50c5d..f48d063bd8 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Elementets längd, om det inte baseras på en profil - + The width of this element, if not based on a profile Elementets bredd, om det inte baseras på en profil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Extruderingsriktningsnormalen för detta objekt (låt vara på (0,0,0) för automatisk normal) - + The structural nodes of this element De strukturella noderna i detta element @@ -135,8 +135,8 @@ Förskjutningsavstånd mellan centrumlinje och nodernas linje - + The facemaker type to use to build the profile of this object Ytskapartypen som används till att skapa profilen för detta objekt @@ -425,14 +425,14 @@ Nummer på tråden som definierar hålet. Värdet 0 anger automatisk beräkning - + The height of this object Höjden på detta objekt - + The computed floor area of this floor Den beräknade golvarean i denna våning @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Typen för denna byggnad @@ -956,8 +956,8 @@ En valfri förskjutning mellan modellens (0,0,0)-origo och den punkt som anges av geo-koordinaterna - + The type of this object Typen av det här objektet @@ -1147,20 +1147,20 @@ Nivån på origo (0,0,0) för denna våning - + An optional description for this component En valfri beskrivning för denna komponent - + An optional tag for this component En valfri etikett för denna komponent - + The shape of this object Formen på detta objekt @@ -1180,8 +1180,8 @@ Ett MaterialNamn:SolidIndexListkarta som relaterar materialnamn med solida index som ska användas som referens av detta objekt från andra filer - + The line width of this object Linjetjockleken för detta objekt @@ -1664,8 +1664,8 @@ Texten att visa. Använd $area, $label, $tag, $floor, $walls, $ceiling för att infoga respektive data - + The name of the font Namnet på teckensnittet @@ -1675,8 +1675,8 @@ Färgen på områdestexten - + The size of the text font Storleken på teckensnittet @@ -2339,23 +2339,23 @@ - + Length Längd - + Width Bredd - + Height Höjd @@ -2387,8 +2387,8 @@ Detta nät är en ogiltig solid - + Facemaker returned an error Ytskapare returnerade ett fel @@ -2501,8 +2501,8 @@ Färdig - + Couldn't compute a shape En form kunde inte beräknas @@ -2769,21 +2769,21 @@ Välj markering - + - + Remove Ta bort - - + + Add Lägg till @@ -2936,9 +2936,9 @@ Floor creation aborted. Vänligen välj minst en axel - + Axes Axlar @@ -2953,8 +2953,8 @@ Floor creation aborted. Stag - + Please select only one base object or none Välj endast ett basobjekt eller inget basobjekt @@ -3006,10 +3006,10 @@ Floor creation aborted. Etikett - - + + Error: Couldn't determine character encoding Fel: Kunde inte avgöra teckenkodning @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Vänligen välj ett basobjekt @@ -3641,9 +3641,9 @@ Site creation aborted. Exportera CSV - + Description Beskrivning @@ -3658,8 +3658,8 @@ Site creation aborted. Totalt - + Export CSV File Exportera CSV-fil @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Värde - + Unit Enhet diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index c37016c79b..f3aa12ba21 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -95,14 +95,14 @@ Araç ekseni etrafında taban dönüşü (yalnızca BasePerpendicularToTool True ise kullanılır) - + The length of this element, if not based on a profile Bu öğenin uzunluğu, eğer profil esaslı değilse - + The width of this element, if not based on a profile Bu öğenin genişliği, eğer profil esaslı değilse @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Bu objenin bormal ekstrüzyon yönü ( Otomatik tanımlamak için (0,0,0) olarak ayarlayın) - + The structural nodes of this element Bu öğenin yapısal düğümleri @@ -135,8 +135,8 @@ Merkez ile düğümleri çizgi arasındaki uzaklık ofset - + The facemaker type to use to build the profile of this object Bu nesnenin profili oluşturmak için kullanılacak facemaker türü @@ -425,14 +425,14 @@ Delik tanımlar tel sayısı. 0 değeri, otomatik anlamına gelir - + The height of this object Bu nesnenin yüksekliği - + The computed floor area of this floor Bu katın hesaplanan kat alanı @@ -850,9 +850,9 @@ Merdivenlerin bitişi ve üst zemin döşemesi arasındaki bağlantı türü - + The type of this building Bu binanın türü @@ -956,8 +956,8 @@ Model (0,0,0) orijin ve jeokoordinatlarla belirtilen nokta arasının isteğe bağlı ötelemesi - + The type of this object Bu nesnenin tipi @@ -1147,20 +1147,20 @@ Bu seviyenin (0,0,0) noktasının seviyesi - + An optional description for this component Bu bileşen için isteğe bağlı bir açıklama - + An optional tag for this component Bu bileşen için isteğe bağlı bir etiket - + The shape of this object Bu nesnenin şekli @@ -1180,8 +1180,8 @@ Bir malzemeAdı: Katı cismi ilişkilendiren malzeme isimleri KatıİçindekilerListesi haritası, diğer dosylardan bu nesneyi tasdiklenmesi için kullanılır - + The line width of this object Bu nesnenin çizgi genişliği @@ -1664,8 +1664,8 @@ Göstermek için metin. $area, $label, $tag, $floor, $walls, $ceiling ilgili veri eklemek için kullanın - + The name of the font Yazı tipinin adını @@ -1675,8 +1675,8 @@ Etiket yazısının rengi - + The size of the text font Etiket yazısının boyutu @@ -2339,23 +2339,23 @@ - + Length Uzunluk - + Width Genişlik - + Height Yükseklik @@ -2387,8 +2387,8 @@ Geçersiz bir katı model Mesh'i - + Facemaker returned an error Facemaker bir hata döndürdü @@ -2501,8 +2501,8 @@ Bitti - + Couldn't compute a shape Bir şekil hesaplanamadi @@ -2769,21 +2769,21 @@ Seçilen çekme - + - + Remove Kaldır - - + + Add Ekle @@ -2936,9 +2936,9 @@ Floor creation aborted. Lütfen en az bir eksen seçin - + Axes Eksenler @@ -2953,8 +2953,8 @@ Floor creation aborted. Demet - + Please select only one base object or none Lütfen sadece bir temel nesne seçiniz @@ -3006,10 +3006,10 @@ Floor creation aborted. Etiket - - + + Error: Couldn't determine character encoding Hata: karakter kodlaması belirlenemedi @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Lütfen temel bir nesne seçin @@ -3641,9 +3641,9 @@ Site creation aborted. CSV olarak dışa aktar - + Description Açıklama @@ -3658,8 +3658,8 @@ Site creation aborted. Toplam - + Export CSV File CSV Dosyasını Dışarı Aktar @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Değer - + Unit Birim diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index 2ee61f5b49..67d45689d2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -95,14 +95,14 @@ База повертається навколо вісі інструменту (використовується, лише якщо База перпендикулярно інструменту обрано) - + The length of this element, if not based on a profile Довжина елемента, якщо вона не визначена в профілі - + The width of this element, if not based on a profile Ширина елемента, якщо вона не визначена в профілі @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Нормальний напрямок видавлювання для цього об'єкта (залишити (0,0,0) для завдання автоматичної нормалі) - + The structural nodes of this element Структурні вузли цього елемента @@ -135,8 +135,8 @@ Зміщення відстані між центральною лінією і вузлами - + The facemaker type to use to build the profile of this object Тип генератора поверхні, який слід використовувати для створення профілю цього об'єкта @@ -425,14 +425,14 @@ Число дротів, що визначає отвір. Значення 0 означає автоматичне значення - + The height of this object Висота цього об'єкта - + The computed floor area of this floor Обчислена площа цього поверху @@ -850,9 +850,9 @@ Тип зв'язку між кінцем сходів і верхньою підлогою плити - + The type of this building Тип цієї будівлі @@ -956,8 +956,8 @@ Опція зміщення між моделлю (0,0) джерелом та точкою, що зазначена геокоординатами - + The type of this object Тип цього об'єкта @@ -1147,20 +1147,20 @@ Рівень (0,0,0) цього рівня - + An optional description for this component Необов'язковий опис для цього компонента - + An optional tag for this component Необов'язковий тег для цього компонента - + The shape of this object Форма цього об'єкта @@ -1180,8 +1180,8 @@ Назва MaterialName: Карта SolidIndexesList що пов'язує імена матеріалів з суцільними індексами для посилань на цей об'єкт з інших файлів - + The line width of this object Товщина лінії цього об'єкту @@ -1664,8 +1664,8 @@ Текст для відображення. Використовуйте $area, $label, $tag, $floor, $walls, $ceiling, щоб вставити відповідні дані - + The name of the font Назва шрифту @@ -1675,8 +1675,8 @@ Колір області тексту - + The size of the text font Розмір шрифту тексту @@ -2340,23 +2340,23 @@ - + Length Довжина - + Width Ширина - + Height Висота @@ -2388,8 +2388,8 @@ Ця сітка є недійсним тілом - + Facemaker returned an error Facemaker повернув помилку @@ -2502,8 +2502,8 @@ Готово - + Couldn't compute a shape Не вдалося обчислити форму @@ -2770,21 +2770,21 @@ Вибрати вибране - + - + Remove Видалити - - + + Add Додати @@ -2937,9 +2937,9 @@ Floor creation aborted. Виберіть принаймні одну вісь - + Axes Вісі @@ -2954,8 +2954,8 @@ Floor creation aborted. В'язка - + Please select only one base object or none Будь ласка, виберіть лише один базовий об'єкт або жодного @@ -3007,10 +3007,10 @@ Floor creation aborted. Позначка - - + + Error: Couldn't determine character encoding Помилка: Не вдалося визначити кодування символів @@ -3028,8 +3028,8 @@ Floor creation aborted. - + Please select a base object Будь ласка, виберіть базовий об'єкт @@ -3642,9 +3642,9 @@ Site creation aborted. Експорт CSV - + Description Опис @@ -3659,8 +3659,8 @@ Site creation aborted. Всього - + Export CSV File Експортувати .CSV файл @@ -3728,16 +3728,16 @@ Site creation aborted. - + Value Значення - + Unit Одиниця diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index e92e2f258d..a6d3b4b825 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile La longitud d'aquest element, si no està basat en un perfil - + The width of this element, if not based on a profile L'amplària d'aquest element, si no està basada en un perfil @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direcció d'extrusió normal d'aquest objecte (mantín (0,0,0) per a automàtica) - + The structural nodes of this element Els nodes estructurals d'aquest element @@ -135,8 +135,8 @@ Distància de separació entre la línia central i la línia de nodes - + The facemaker type to use to build the profile of this object El tipus de generador de cares que s'ha d'utilitzar per a construir el perfil d'aquest objecte @@ -425,14 +425,14 @@ El nombre de filferros que defineix el forat. Un valor de 0 significa automàtic - + The height of this object L'alçària d'aquest objecte - + The computed floor area of this floor L'àrea calculada d'aquesta planta @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building El tipus d'edifici @@ -956,8 +956,8 @@ Un desplaçament opcional entre l'origen del model (0,0,0) i el punt indicat per les coordenades geogràfiques - + The type of this object El tipus d'aquest objecte @@ -1147,20 +1147,20 @@ El nivell del punt (0,0,0) en aquest nivell - + An optional description for this component Una descripció opcional d'aquest component - + An optional tag for this component Una etiqueta opcional d'aquest component - + The shape of this object La forma d'aquest objecte @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object L'amplària de la línia d'aquest objecte @@ -1664,8 +1664,8 @@ El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra @@ -1675,8 +1675,8 @@ El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text @@ -2339,23 +2339,23 @@ - + Length Longitud - + Width Amplària - + Height Alçària @@ -2387,8 +2387,8 @@ Aquesta malla no és un sòlid vàlid. - + Facemaker returned an error El generador de cares ha retornat un error. @@ -2500,8 +2500,8 @@ Fet - + Couldn't compute a shape No s'ha pogut calcular la forma. @@ -2768,21 +2768,21 @@ Tria el seleccionat - + - + Remove Elimina - - + + Add Afegir @@ -2935,9 +2935,9 @@ Floor creation aborted. Seleccioneu com a mínim un eix - + Axes Eixos @@ -2952,8 +2952,8 @@ Floor creation aborted. Encavallada - + Please select only one base object or none Seleccioneu només un objecte base o cap @@ -3005,10 +3005,10 @@ Floor creation aborted. Etiqueta - - + + Error: Couldn't determine character encoding Error: no s'ha pogut determinar la codificació de caràcters @@ -3026,8 +3026,8 @@ Floor creation aborted. - + Please select a base object Seleccioneu un objecte base @@ -3640,9 +3640,9 @@ Site creation aborted. Exporta a CSV - + Description Descripció @@ -3657,8 +3657,8 @@ Site creation aborted. Total - + Export CSV File Exporta el fitxer CSV @@ -3726,16 +3726,16 @@ Site creation aborted. - + Value Valor - + Unit Unitat diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index 3964f5a427..8492abc7b2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile Độ dài của bộ phận này nếu nó không dựa trên bề mặt - + The width of this element, if not based on a profile Bề rộng của bộ phận này nếu nó không dựa trên bề mặt @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Hướng đùn thông thường của đối tượng này (giữ mặc định ở (0,0,0)) - + The structural nodes of this element Các nút kết cấu của bộ phận này @@ -135,8 +135,8 @@ Khoảng cách giữa đường trung tâm và đường nút - + The facemaker type to use to build the profile of this object Loại công cụ được sử dụng để xây dựng bề mặt của đối tượng này @@ -425,14 +425,14 @@ Số dây xác định lỗ. Giá trị 0 sẽ có nghĩa là giá trị tự động - + The height of this object Chiều cao của đối tượng này - + The computed floor area of this floor Phần diện tích tính toán của tầng này @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building Loại công trình @@ -956,8 +956,8 @@ Khoảng cách tùy chọn giữa điểm xuất phát của mô hình (0,0,0) và điểm được định vị thông qua tọa độ địa lý - + The type of this object The type of this object @@ -1147,20 +1147,20 @@ Mức (0,0,0) của điểm này - + An optional description for this component Mô tả tùy chọn cho bộ phận này - + An optional tag for this component Một nhãn hiệu tùy chọn cho bộ phận này - + The shape of this object Hình dạng của bộ phận này @@ -1180,8 +1180,8 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - + The line width of this object Chiều dài đường vẽ của bộ phận này @@ -1664,8 +1664,8 @@ Để hiển thị văn bản. Sử dụng $area, $label, $tag, $floor, $walls, $ceiling để chèn các loại dữ liệu tương ứng - + The name of the font Tên của phông chữ @@ -1675,8 +1675,8 @@ Màu chữ của văn bản trong khu vực - + The size of the text font Kích cỡ phông chữ của văn bản @@ -2339,23 +2339,23 @@ - + Length Chiều dài - + Width Bề rộng - + Height Chiều cao @@ -2387,8 +2387,8 @@ Lưới này là một vật thể rắn không hợp lệ - + Facemaker returned an error Facemaker đã hoàn trả một lỗi @@ -2501,8 +2501,8 @@ Xong - + Couldn't compute a shape Không thể tính toán hình dạng @@ -2769,21 +2769,21 @@ Chọn các đối tượng đã được chọn - + - + Remove Xóa bỏ - - + + Add Thêm mới @@ -2936,9 +2936,9 @@ Floor creation aborted. Hãy chọn ít nhất một trục - + Axes Các trục @@ -2953,8 +2953,8 @@ Floor creation aborted. Truss - + Please select only one base object or none Please select only one base object or none @@ -3006,10 +3006,10 @@ Floor creation aborted. Nhãn - - + + Error: Couldn't determine character encoding Lỗi: Không thể xác định mã hóa ký tự @@ -3027,8 +3027,8 @@ Floor creation aborted. - + Please select a base object Hãy chọn một đối tượng cơ bản @@ -3641,9 +3641,9 @@ Site creation aborted. Xuất CSV - + Description Mô tả @@ -3658,8 +3658,8 @@ Site creation aborted. Tổng - + Export CSV File Xuất tệp CSV @@ -3727,16 +3727,16 @@ Site creation aborted. - + Value Giá trị - + Unit Đơn vị diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index a9ab17430f..d44b322924 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -95,14 +95,14 @@ 工具轴周围的基础旋转 (仅在 BasePerpendicularToToot 为 True) - + The length of this element, if not based on a profile 该元素长度, 其不基于轮廓 - + The width of this element, if not based on a profile 该元素宽度, 其不基于轮廓 @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 该对象的法向拉伸方向((0,0,0)表示自动法向) - + The structural nodes of this element 这个元素的结构节点 @@ -135,8 +135,8 @@ 中线和节点线之间的偏移距离 - + The facemaker type to use to build the profile of this object 用于生成此对象轮廓的面生成器类型 @@ -425,14 +425,14 @@ 定义孔的线数。值0表示自动 - + The height of this object 此对象的高度 - + The computed floor area of this floor 地板的计算面积 @@ -850,9 +850,9 @@ 楼梯末尾与上层地板块之间的连接类型 - + The type of this building 此建筑的类型 @@ -956,8 +956,8 @@ 模型 (0, 0, 0) 原点与地理坐标指示的点之间的可选偏移量 - + The type of this object 此对象的类型 @@ -1147,20 +1147,20 @@ 此级别的(0,0,0) 点的级别 - + An optional description for this component 此组件的可选说明 - + An optional tag for this component 此组件的可选标签 - + The shape of this object 此对象的形状 @@ -1180,8 +1180,8 @@ 材质名称: 从你的材料列表中引用，它将材料名称与实体索引联系起来，以便在从其他文件引用该对象时使用 - + The line width of this object 此对象的线条宽度 @@ -1664,8 +1664,8 @@ 要显示的文本。使用$area，$label，$label，$tag，$floor，$floor，$walls，$ceiling来插入各自的数据 - + The name of the font 字体的名称 @@ -1675,8 +1675,8 @@ 区域文本的颜色 - + The size of the text font 文本字体的大小 @@ -2339,23 +2339,23 @@ - + Length 长度 - + Width 宽度 - + Height 高度 @@ -2387,8 +2387,8 @@ 该网格是无效实体 - + Facemaker returned an error 服务器返回一个错误 @@ -2501,8 +2501,8 @@ 完成 - + Couldn't compute a shape 无法计算形状 @@ -2769,21 +2769,21 @@ 选取选定的 - + - + Remove 删除 - - + + Add 添加 @@ -2936,9 +2936,9 @@ floor函数创建中止。 请至少选择一个坐标轴 - + Axes 轴线 @@ -2953,8 +2953,8 @@ floor函数创建中止。 桁架 - + Please select only one base object or none 请只选择一个基对象或不选 @@ -3006,10 +3006,10 @@ floor函数创建中止。 标签 - - + + Error: Couldn't determine character encoding 错误:无法确定字符编码 @@ -3027,8 +3027,8 @@ floor函数创建中止。 - + Please select a base object 请选择一个基物体 @@ -3634,9 +3634,9 @@ Site creation aborted. 导出 CSV - + Description 描述 @@ -3651,8 +3651,8 @@ Site creation aborted. 总计 - + Export CSV File 导出 CSV 文件 @@ -3720,16 +3720,16 @@ Site creation aborted. - + Value 值 - + Unit 单位 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 9e19c53125..c0c5845eaa 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -95,14 +95,14 @@ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - + The length of this element, if not based on a profile 該元素的長度，如果不是基於輪廓 - + The width of this element, if not based on a profile 該元素的寬度，如果不是基於輪廓 @@ -113,14 +113,14 @@ - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 該對象的法向拉伸方向(保持 (0,0,0) 表示自動法向) - + The structural nodes of this element The structural nodes of this element @@ -135,8 +135,8 @@ Offset distance between the centerline and the nodes line - + The facemaker type to use to build the profile of this object 用於生成此對象輪廓的 facemaker 類型 @@ -425,14 +425,14 @@ The number of the wire that defines the hole. A value of 0 means automatic - + The height of this object 此物件的高度 - + The computed floor area of this floor 這個樓層的計算樓面面積 @@ -850,9 +850,9 @@ The type of connection between the end of the stairs and the upper floor slab - + The type of this building 此建築的類型 @@ -956,8 +956,8 @@ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates - + The type of this object 此物件的類型 @@ -1147,20 +1147,20 @@ 此級別的 (0,0,0) 點的級別 - + An optional description for this component 此元件的可選說明 - + An optional tag for this component 此元件的可選標籤 - + The shape of this object 此物件的形狀 @@ -1180,8 +1180,8 @@ 材質名稱：從你的材質清單中引用，它將材質名稱與實體索引進行關聯，以便於從其它檔案引用該物件時使用 - + The line width of this object 此物件的線寬 @@ -1665,8 +1665,8 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font 字型名稱 @@ -1676,8 +1676,8 @@ 區域文字的顏色。 - + The size of the text font 字體大小 @@ -2340,23 +2340,23 @@ - + Length 間距 - + Width 寬度 - + Height 高度 @@ -2388,8 +2388,8 @@ 此網格為無效實體 - + Facemaker returned an error Facemaker returned an error @@ -2502,8 +2502,8 @@ 完成 - + Couldn't compute a shape 無法計算形狀 @@ -2770,21 +2770,21 @@ Pick selected - + - + Remove 移除 - - + + Add 新增 @@ -2937,9 +2937,9 @@ Floor creation aborted. Please select at least one axis - + Axes 軸 @@ -2954,8 +2954,8 @@ Floor creation aborted. 桁架 - + Please select only one base object or none Please select only one base object or none @@ -3007,10 +3007,10 @@ Floor creation aborted. Label - - + + Error: Couldn't determine character encoding 錯誤：無法定義字元編碼 @@ -3028,8 +3028,8 @@ Floor creation aborted. - + Please select a base object Please select a base object @@ -3642,9 +3642,9 @@ Site creation aborted. Export CSV - + Description 說明 @@ -3659,8 +3659,8 @@ Site creation aborted. Total - + Export CSV File Export CSV File @@ -3728,16 +3728,16 @@ Site creation aborted. - + Value 值 - + Unit 單位 diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index b808c1c164..3f55ec86d3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -39,16 +39,16 @@ Longitud d'aquesta línia - + Radius to use to fillet the corners Radi a utilitzar per arrodonir les cantonades - + Size of the chamfer to give to the corners Mida del xamfrà a donar a les cantonades @@ -63,12 +63,12 @@ Nombre de subdivisions de cada aresta - - - - + + + + The area of this object La superfície d'aquest objecte @@ -268,10 +268,10 @@ subelement 'VertexN', 'ArestaN' o 'CaraN' respectivament, si s'especifiquen.Radi de la circumferència - - + + Create a face Crear una cara @@ -323,8 +323,8 @@ subelement 'VertexN', 'ArestaN' o 'CaraN' respectivament, si s'especifiquen. - + Show the individual array elements (only for Link arrays) Mostra els elements individuals de la matriu (només per matrius de tipus 'Enllaç') @@ -979,33 +979,33 @@ Aquesta propietat és només de lectura, jau que el nombre depèn dels punts con Posicionament, desplaçament o rotació addiciionals que s'aplicarà a cada còpia - + The size of the text Mida del text - + The font of the text Tipus de lletra del text + - The vertical alignment of the text Aliniació vertical del text - + Text color Color del text - + Line spacing (relative to font size) Interliniat (relatiu a la mida de la lletra) @@ -1575,16 +1575,16 @@ mitjançant l'opció Eines ->Gestor de complements No s'ha definit la direcció de desplaçament. Si us plau, moveu el ratolí a un o altre costat de l'objecte abans per indicar-ne la direcció - - + + True Cert - - + + False Fals @@ -4237,13 +4237,13 @@ such as "Arial:Bold" - + mm mm @@ -4559,9 +4559,9 @@ del gestor de complements. Permeten a FreeCAD automàticament descarregar i actualitzar les biblioteques DXF + - Import options Opcions d'importació @@ -5445,11 +5445,11 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí. + - Copy Copia @@ -6124,41 +6124,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. Cap document actiu. S'està interrompent. - - + - - + + + Wrong input: object not in document. Entrada incorrecta: l'objecte no és al document. @@ -6581,6 +6581,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6593,15 +6594,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Entrada incorrecta: ha de ser un vector. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: ha de ser un posicionament, un vector o una rotació. @@ -6633,10 +6633,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Entrada incorrecta: ha de ser una llista de cadenes o una sola cadena. @@ -6647,12 +6647,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada incorrecta: ha de ser una cadena, 'Horitzontal', 'Vertical' o 'Personalitzat'. + - - + Wrong input: must be a number. Entrada incorrecta: ha de ser un nombre. @@ -7192,10 +7192,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc per 3 punts - - + + Pick first point Trieu el primer punt @@ -7288,8 +7288,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSeleccioneu objectes per a retallar o allargar - + Pick distance Trieu la distància @@ -7417,8 +7417,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEstira - + Please select exactly two objects, the base object and the path object, before calling this command. Si us plau, seleccioneu exactament dos objectes, l'objecte base i l'objecte camí abans d'invocar aquesta ordre. @@ -7509,8 +7509,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCrea un rectangle - + Pick opposite point Trieu el punt oposat @@ -7764,8 +7764,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMou - + Some subelements could not be moved. Alguns subelements no s'han pogut moure. @@ -7936,16 +7936,16 @@ L'angle final serà l'angle de base més aquesta quantitat. Separa la línia - - + + Task panel: Tauler de tasques: - - + + At least one element must be selected. Cal seleccionar com a mínim un element. @@ -7955,19 +7955,19 @@ L'angle final serà l'angle de base més aquesta quantitat. El nombre d'elements ha de ser com a mínim 1. - - + + Selection is not suitable for array. La selecció no és adequada per a una matriu. - - - - + + + + Object: Objecte: @@ -7987,16 +7987,16 @@ L'angle final serà l'angle de base més aquesta quantitat. Reinicia l'intèrval Z: - - + + Fuse: Combina: - - + + Create Link array: Crea matriu d'enllaços: @@ -8031,9 +8031,9 @@ L'angle final serà l'angle de base més aquesta quantitat. Intèrval Z: - - + + Aborted: Interromput: @@ -8063,8 +8063,8 @@ L'angle final serà l'angle de base més aquesta quantitat. La distància tangencial és negativa. Es torna positiva per continuar. - + Center reset: Reinicia el centre: @@ -8089,8 +8089,8 @@ L'angle final serà l'angle de base més aquesta quantitat. Paràmetre de simetria: - + Center of rotation: Centre de rotació: diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 30bb353555..79bbaaa482 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -39,16 +39,16 @@ Délka této čáry - + Radius to use to fillet the corners Rádius pro zaoblení rohů - + Size of the chamfer to give to the corners Velikost zkosení pro rohy @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object Plocha tohoto objektu @@ -269,10 +269,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Poloměr kružnice - - + + Create a face Vytvořit plochu @@ -324,8 +324,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Zobrazit jednotlivé prvky pole (pouze u polí odkazů) @@ -986,33 +986,33 @@ Tato vlastnost je pouze pro čtení, protože počet prvků závisí na bodech o Additional placement, shift and rotation, that will be applied to each copy - + The size of the text Velikost textu - + The font of the text Písmo textu + - The vertical alignment of the text The vertical alignment of the text - + Text color Barva textu - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1584,16 +1584,16 @@ z menu Nástroje -> Manažer doplňků Směr odsazení není definován. Prosím, přesuňte myš na jednu nebo druhou stranu objektu pro naznačení směru - - + + True Pravda - - + + False Nepravda @@ -4278,13 +4278,13 @@ such as "Arial:Bold" - + mm mm @@ -4603,9 +4603,9 @@ from the Addon Manager. Povolit FreeCADu automaticky stáhnout a aktualizovat DXF knihovny + - Import options Možnosti importu @@ -5499,11 +5499,11 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? + - Copy Kopírovat @@ -6178,41 +6178,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6635,6 +6635,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6647,15 +6648,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Chybný vstup: musí být vektor. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6687,10 +6687,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Chybný vstup: musí být seznam řetězců nebo jeden řetězec. @@ -6701,12 +6701,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7246,10 +7246,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledOblouk podle 3 bodů - - + + Pick first point Pick first point @@ -7342,8 +7342,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledVyberte objekty k oříznutí nebo rozšíření - + Pick distance Zvolte vzdálenost @@ -7471,8 +7471,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledRoztáhnout - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7563,8 +7563,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7818,8 +7818,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledPřesun - + Some subelements could not be moved. Some subelements could not be moved. @@ -7990,16 +7990,16 @@ The final angle will be the base angle plus this amount. Rozdělit čáru - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8009,19 +8009,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8041,16 +8041,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8085,9 +8085,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8117,8 +8117,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8143,8 +8143,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 0ec321dc33..caf59f9a49 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -39,16 +39,16 @@ Die Länge dieser Linie - + Radius to use to fillet the corners Zu verwendender Radius der Abrundung - + Size of the chamfer to give to the corners Größe der Fase für die Ecken @@ -63,12 +63,12 @@ Die Anzahl der Unterteilungen jeder Kante - - - - + + + + The area of this object Der Bereich dieses Objekts @@ -270,10 +270,10 @@ Für „Position“, „Länge“ und „Fläche“ werden diese Eigenschaften a Radius des Kreises - - + + Create a face Fläche erzeugen @@ -325,8 +325,8 @@ Für „Position“, „Länge“ und „Fläche“ werden diese Eigenschaften a - + Show the individual array elements (only for Link arrays) Zeige die einzelnen Anordnungs-Elemente (nur für verknüpfte Anordnungen) @@ -989,33 +989,33 @@ Diese Eigenschaft ist nur lesbar, da die Zahl von den Punkten im 'Punkt Objekt' Zusätzliche Platzierung, Verschiebung und Drehung, die auf jede Kopie angewendet werden - + The size of the text Die Größe des Textes - + The font of the text Die Schriftart des Textes + - The vertical alignment of the text Die vertikale Ausrichtung des Textes - + Text color Textfarbe - + Line spacing (relative to font size) Zeilenabstand (abhängig von der Schrifthöhe) @@ -1583,16 +1583,16 @@ from menu Tools -> Addon Manager Versatz Richtung ist nicht definiert. Bitte bewegen Sie die Maus auf einer Seiten des Objekts zuerst, um eine Richtung anzuzeigen - - + + True Wahr - - + + False Falsch @@ -4268,13 +4268,13 @@ such as "Arial:Bold" - + mm mm @@ -4592,9 +4592,9 @@ im Addon Manager installieren. FreeCAD das automatische Herunterladen und Aktualisieren der DXF-Bibliotheken erlauben + - Import options Import Einstellungen @@ -5485,11 +5485,11 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z + - Copy Kopieren @@ -6163,41 +6163,41 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istTextur kann nicht geladen werden - - - + + + + - - - - + + + No active document. Aborting. Kein aktives Dokument. Abbruch. - - + - - + + + Wrong input: object not in document. Falsche Eingabe: Objekt nicht im Dokument. @@ -6620,6 +6620,7 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist + @@ -6632,15 +6633,14 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist - Wrong input: must be a vector. Falsche Eingabe: muss ein Vektor sein. - + Wrong input: must be a placement, a vector, or a rotation. Falsche Eingabe: muss eine Platzierung, ein Vektor oder eine Drehung sein. @@ -6672,10 +6672,10 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istFalsche Eingabe: label_type muss einer der folgenden sein: - - + + Wrong input: must be a list of strings or a single string. Falsche Eingabe: muss eine Liste von Zeichenketten oder eine einzelne Zeichenkette sein. @@ -6686,12 +6686,12 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istFalsche Eingabe: muss ein String, 'Horizontal', 'Vertical' oder 'Custom' sein. + - - + Wrong input: must be a number. Falsche Eingabe: muss eine Zahl sein. @@ -7231,10 +7231,10 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istBogen aus 3 Punkten - - + + Pick first point Wähle den ersten Punkt @@ -7327,8 +7327,8 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istWähle Objekt(e) zum verkürzen/verlängern - + Pick distance Abstand auswählen @@ -7456,8 +7456,8 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istStrecken - + Please select exactly two objects, the base object and the path object, before calling this command. Bitte wählen Sie genau zwei Objekte, das Basisobjekt und das Pfadobjekt, bevor Sie diesen Befehl aufrufen. @@ -7548,8 +7548,8 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istRechteck erstellen - + Pick opposite point Gegenüberliegenden Punkt wählen @@ -7803,8 +7803,8 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istVerschieben - + Some subelements could not be moved. Einige Unterelemente konnten nicht verschoben werden. @@ -7975,16 +7975,16 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Linie teilen - - + + Task panel: Aufgabenbereich: - - + + At least one element must be selected. Es muss mindestens ein Element ausgewählt werden. @@ -7994,19 +7994,19 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Anzahl der Elemente muss mindestens 1 sein. - - + + Selection is not suitable for array. Auswahl ist nicht für Anordnung geeignet. - - - - + + + + Object: Objekt: @@ -8026,16 +8026,16 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Z-Reset Intervall: - - + + Fuse: Vereinigung: - - + + Create Link array: Verknüpfte Anordnung erstellen: @@ -8070,9 +8070,9 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Intervall Z: - - + + Aborted: Abgebrochen: @@ -8102,8 +8102,8 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Die Tangentialdistanz ist negativ. Sie wird positiv gemacht, fortzufahren. - + Center reset: Zentriert: @@ -8128,8 +8128,8 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag. Symmetrie-Parameter: - + Center of rotation: Drehpunkt: diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index 2796faf31e..0aea718e9a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object The area of this object @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Create a face @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Χρώμα κειμένου - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1590,16 +1590,16 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Αληθές - - + + False Ψευδές @@ -4287,13 +4287,13 @@ such as "Arial:Bold" - + mm χιλιοστά @@ -4612,9 +4612,9 @@ from the Addon Manager. Να επιτρέπεται στο FreeCAD να κατεβάζει και ανανεώνει αυτόματα τις βιβλιοθήκες DXF + - Import options Επιλογές εισαγωγής @@ -5509,11 +5509,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy Αντιγραφή @@ -6188,41 +6188,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6645,6 +6645,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6657,15 +6658,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6697,10 +6697,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6711,12 +6711,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7256,10 +7256,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7352,8 +7352,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7481,8 +7481,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7573,8 +7573,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7828,8 +7828,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledΜετακινήστε - + Some subelements could not be moved. Some subelements could not be moved. @@ -8000,16 +8000,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8019,19 +8019,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8051,16 +8051,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8095,9 +8095,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8127,8 +8127,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8153,8 +8153,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index bff4c7f059..3d1a15f88f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -39,16 +39,16 @@ La longitud de esta linea - + Radius to use to fillet the corners Radio usado para el redondeo de las esquinas - + Size of the chamfer to give to the corners Tamaño del biselado para dar a las esquinas @@ -63,12 +63,12 @@ El número de subdivisiones de cada arista - - - - + + + + The area of this object El área de éste objeto @@ -270,10 +270,10 @@ o desde el subelemento 'VerticeN', 'AristaN', o 'CaraN', respectivamente, si es Radio del círculo - - + + Create a face Crear una cara @@ -325,8 +325,8 @@ o desde el subelemento 'VerticeN', 'AristaN', o 'CaraN', respectivamente, si es - + Show the individual array elements (only for Link arrays) Muestra los elementos individuales de la matriz (sólo para matrices de Enlace) @@ -992,33 +992,33 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con Posición, cambio y rotación adicionales, que se aplicará a cada copia - + The size of the text El tamaño del texto - + The font of the text El tipo de letra del texto + - The vertical alignment of the text La alineación vertical del texto - + Text color Color del texto - + Line spacing (relative to font size) Interlineado (en relación con el tamaño de fuente) @@ -1590,16 +1590,16 @@ desde el menú Herramientas -> Administrador de Complementos La dirección del desplazamiento no está definida. Por favor, mueva el ratón a cada lado del objeto primero para indicar una dirección - - + + True Verdadero - - + + False Falso @@ -4285,13 +4285,13 @@ como "Arial: Negrita" - + mm mm @@ -4610,9 +4610,9 @@ desde el Administrador de Complementos. Permitir que FreeCAD descargue y actualize automáticamente las librerías DXF + - Import options Opciones de importación @@ -5504,11 +5504,11 @@ Para habilitar FreeCAD para descargar estas bibliotecas, responda Sí. + - Copy Copiar @@ -6182,41 +6182,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledno se puede cargar la textura - - - + + + + - - - - + + + No active document. Aborting. No hay documento activo. Abortando. - - + - - + + + Wrong input: object not in document. Entrada incorrecta: objeto no está en el documento. @@ -6639,6 +6639,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6651,15 +6652,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Entrada incorrecta: debe ser un vector. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: debe ser una ubicación, un vector o una rotación. @@ -6691,10 +6691,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada incorrecta: label_type debe ser una de las siguientes: - - + + Wrong input: must be a list of strings or a single string. Entrada incorrecta: debe ser una lista de cadenas o una sola cadena. @@ -6705,12 +6705,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada incorrecta: debe ser una cadena, 'Horizontal', 'Vertical' o 'Personalizado'. + - - + Wrong input: must be a number. Entrada incorrecta: debe ser un número. @@ -7250,10 +7250,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArco por 3 puntos - - + + Pick first point Elegir primer punto @@ -7346,8 +7346,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSeleccionar objetos para recortar o extender - + Pick distance Elegir distancia @@ -7475,8 +7475,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEstirar - + Please select exactly two objects, the base object and the path object, before calling this command. Por favor, seleccione exactamente dos objetos, el objeto base y el objeto de trayectoria, antes de llamar a este comando. @@ -7567,8 +7567,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCrear Rectángulo - + Pick opposite point Elegir punto opuesto @@ -7822,8 +7822,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMover - + Some subelements could not be moved. Algunos subelementos no se pudieron mover. @@ -7994,16 +7994,16 @@ El ángulo final será el ángulo base más esta cantidad. Dividir línea - - + + Task panel: Panel de tarea: - - + + At least one element must be selected. Se debe seleccionar al menos un elemento. @@ -8013,19 +8013,19 @@ El ángulo final será el ángulo base más esta cantidad. Número de elementos debe ser al menos 1. - - + + Selection is not suitable for array. La selección no es adecuada para la matriz. - - - - + + + + Object: Objeto: @@ -8045,16 +8045,16 @@ El ángulo final será el ángulo base más esta cantidad. Intervalo Z reiniciado: - - + + Fuse: Fusión: - - + + Create Link array: Crear Matriz de enlaces: @@ -8089,9 +8089,9 @@ El ángulo final será el ángulo base más esta cantidad. Intervalo Z: - - + + Aborted: Abortado: @@ -8121,8 +8121,8 @@ El ángulo final será el ángulo base más esta cantidad. La distancia tangencial es negativa. Se hace positiva para continuar. - + Center reset: Reiniciar centro: @@ -8147,8 +8147,8 @@ El ángulo final será el ángulo base más esta cantidad. Parámetro de simetría: - + Center of rotation: Centro de rotación: diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 99a477ecfc..94457ae1c4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -39,16 +39,16 @@ La longitud de esta linea - + Radius to use to fillet the corners Radio para redondear las esquinas - + Size of the chamfer to give to the corners Tamaño del chaflán para dar a las esquinas @@ -63,12 +63,12 @@ El número de subdivisiones de cada arista - - - - + + + + The area of this object El área de este objeto @@ -270,10 +270,10 @@ o desde el subelemento 'VerticeN', 'AristaN', o 'CaraN', respectivamente, si es Radio del círculo - - + + Create a face Crear una cara @@ -325,8 +325,8 @@ o desde el subelemento 'VerticeN', 'AristaN', o 'CaraN', respectivamente, si es - + Show the individual array elements (only for Link arrays) Muestra los elementos individuales de la matriz (sólo para matrices vinculadas) @@ -992,33 +992,33 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con Posición, cambio y rotación adicionales, que se aplicará a cada copia - + The size of the text El tamaño del texto - + The font of the text El tipo de letra del texto + - The vertical alignment of the text La alineación vertical del texto - + Text color Color del texto - + Line spacing (relative to font size) Interlineado (en relación con el tamaño de fuente) @@ -1590,16 +1590,16 @@ desde el menú Herramientas -> Administrador de complementos La dirección del desplazamiento no está definida. Por favor, mueva el ratón a cada lado del objeto primero para indicar una dirección - - + + True Verdadero - - + + False Falso @@ -4284,13 +4284,13 @@ such as "Arial:Bold" - + mm mm @@ -4609,9 +4609,9 @@ desde el Administrador de Complementos. Permitir que FreeCAD descargue y actualize automáticamente las librerías DXF + - Import options Importar opciones @@ -5504,11 +5504,11 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si. + - Copy Copiar @@ -6182,41 +6182,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledno se puede cargar la textura - - - + + + + - - - - + + + No active document. Aborting. No hay documento activo. Abortando. - - + - - + + + Wrong input: object not in document. Entrada incorrecta: objeto no está en el documento. @@ -6639,6 +6639,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6651,15 +6652,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Entrada incorrecta: debe ser un vector. - + Wrong input: must be a placement, a vector, or a rotation. Entrada incorrecta: debe ser una ubicación, un vector o una rotación. @@ -6691,10 +6691,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada incorrecta: label_type debe ser una de las siguientes: - - + + Wrong input: must be a list of strings or a single string. Entrada incorrecta: debe ser una lista de cadenas o una sola cadena. @@ -6705,12 +6705,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada incorrecta: debe ser una cadena, 'Horizontal', 'Vertical' o 'Personalizado'. + - - + Wrong input: must be a number. Entrada incorrecta: debe ser un número. @@ -7250,10 +7250,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArco por 3 puntos - - + + Pick first point Elegir primer punto @@ -7346,8 +7346,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSeleccionar objetos para recortar o extender - + Pick distance Elegir distancia @@ -7475,8 +7475,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEstirar - + Please select exactly two objects, the base object and the path object, before calling this command. Por favor, seleccione exactamente dos objetos, el objeto base y el objeto de trayectoria, antes de llamar a este comando. @@ -7567,8 +7567,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCrear Rectángulo - + Pick opposite point Elegir punto opuesto @@ -7822,8 +7822,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMover - + Some subelements could not be moved. Algunos subelementos no se pudieron mover. @@ -7994,16 +7994,16 @@ El ángulo final será el ángulo base más esta cantidad. Dividir línea - - + + Task panel: Panel de tarea: - - + + At least one element must be selected. Se debe seleccionar al menos un elemento. @@ -8013,19 +8013,19 @@ El ángulo final será el ángulo base más esta cantidad. Número de elementos debe ser al menos 1. - - + + Selection is not suitable for array. La selección no es adecuada para la matriz. - - - - + + + + Object: Objeto: @@ -8045,16 +8045,16 @@ El ángulo final será el ángulo base más esta cantidad. Intervalo Z reiniciado: - - + + Fuse: Fusión: - - + + Create Link array: Crear Matriz de enlaces: @@ -8089,9 +8089,9 @@ El ángulo final será el ángulo base más esta cantidad. Intervalo Z: - - + + Aborted: Abortado: @@ -8121,8 +8121,8 @@ El ángulo final será el ángulo base más esta cantidad. La distancia tangencial es negativa. Se hace positiva para continuar. - + Center reset: Reiniciar centro: @@ -8147,8 +8147,8 @@ El ángulo final será el ángulo base más esta cantidad. Parámetro de simetría: - + Center of rotation: Centro de rotación: diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 8464ce744e..879d8897af 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index ca02b38369..3d6e0f2360 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -39,16 +39,16 @@ Lerro honen luzera - + Radius to use to fillet the corners Izkinak biribiltzeko erabiliko den erradioa - + Size of the chamfer to give to the corners Izkinei emango zaien alakaren tamaina @@ -63,12 +63,12 @@ Ertz bakoitzaren zatiketa kopurua - - - - + + + + The area of this object Objektuaren area @@ -268,10 +268,10 @@ nagusitik erauziko dira, edo 'ErpinaN', 'ErtzaN' edo 'AurpegiaN' azpielementutik Zirkuluaren erradioa - - + + Create a face Sortu aurpegi bat @@ -323,8 +323,8 @@ nagusitik erauziko dira, edo 'ErpinaN', 'ErtzaN' edo 'AurpegiaN' azpielementutik - + Show the individual array elements (only for Link arrays) Erakutsi banakako matrize-elementuak (esteka-matrizeetarako soilik) @@ -989,33 +989,33 @@ Propietate hau irakurtzeko soilik da, kopuru hori 'Puntu-objektua' elementuak di Kopia bakoitzari aplikatuko zaion kokapen, desplazamendu eta biraketa gehigarria - + The size of the text Testuaren tamaina - + The font of the text Testuaren letra-tipoa + - The vertical alignment of the text Testuaren lerrokatze bertikala - + Text color Testu-kolorea - + Line spacing (relative to font size) Lerroartea (letra-tipoarekiko) @@ -1587,16 +1587,16 @@ Instalatu DXF liburutegiaren gehigarria eskuz Desplazamenduaren norabidea ez dago definituta. Eraman sagua objektuaren aldeetako batera, norabide bat adierazteko - - + + True Egia - - + + False Gezurra @@ -2934,7 +2934,7 @@ Ctrl atxikitzeko, Shift murrizteko, Alt kopiatzeko. Select Plane - Select Plane + Hautatu planoa @@ -4277,13 +4277,13 @@ such as "Arial:Bold" - + mm mm @@ -4601,9 +4601,9 @@ Eskuz ere egin daiteke, "dxf_library" lan-mahaia instalatuta gehigarrien kudeatz Onartu FreeCADek automatikoki deskarga eta egunera ditzan DXF liburutegiak + - Import options Inportazio-aukerak @@ -5496,11 +5496,11 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'. + - Copy Kopiatu @@ -6175,41 +6175,41 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Ezin da testura kargatu - - - + + + + - - - - + + + No active document. Aborting. Ez dago dokumentu aktiborik. Abortatzen. - - + - - + + + Wrong input: object not in document. Okerreko sarrera: objektua ez dago dokumentuan. @@ -6632,6 +6632,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba + @@ -6644,15 +6645,14 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba - Wrong input: must be a vector. Okerreko sarrera: bektore bat izan behar du. - + Wrong input: must be a placement, a vector, or a rotation. Okerreko sarrera: kokapen bat, bektore bat edo biraketa bat izan behar du. @@ -6684,10 +6684,10 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Okerreko sarrera: label_type aldagaiak hurrengoetako bat izan behar du: - - + + Wrong input: must be a list of strings or a single string. Okerreko sarrera: kateen zerrenda bat edo kate bakarra izan behar du. @@ -6698,12 +6698,12 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Okerreko sarrera: izan behar du kate bat, 'Horizontala', 'Bertikala' edo 'Pertsonalizatua'. + - - + Wrong input: must be a number. Okerreko sarrera: zenbaki bat izan behar du. @@ -7243,10 +7243,10 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Arkua 3 punturen arabera - - + + Pick first point Aukeratu lehen puntua @@ -7339,8 +7339,8 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Hautatu muxarratuko/luzatuko diren objektuak - + Pick distance Aukeratu distantzia @@ -7468,8 +7468,8 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Luzatu - + Please select exactly two objects, the base object and the path object, before calling this command. Hautatu bi objektu, oinarri-objektua eta bide-objektua, komando hau exekutatu baino lehen. @@ -7560,8 +7560,8 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Sortu laukizuzena - + Pick opposite point Aukeratu aurkako puntua @@ -7815,8 +7815,8 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Mugitu - + Some subelements could not be moved. Zenbait azpielementu ezin dira mugitu. @@ -7987,16 +7987,16 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Zatitu lerroa - - + + Task panel: Ataza-panela: - - + + At least one element must be selected. Gutxienez elementu bat hautatu behar da. @@ -8006,19 +8006,19 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Elementu kopuruak gutxienez 1 izan behar du. - - + + Selection is not suitable for array. Hautapena ez da egokia matrizerako. - - - - + + + + Object: Objektua: @@ -8038,16 +8038,16 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Z tartearen berrezarpena: - - + + Fuse: Fusionatu: - - + + Create Link array: Sortu esteka-matrizea: @@ -8082,9 +8082,9 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Z tartea: - - + + Aborted: Abortatua: @@ -8114,8 +8114,8 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Distantzia tangentziala negatiboa da. Positibo bihurtu da jarraitu ahal izateko. - + Center reset: Zentroaren berrezarpena: @@ -8140,8 +8140,8 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Simetria-parametroa: - + Center of rotation: Biraketa-zentroa: diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index d3af358807..b32681970a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -39,16 +39,16 @@ Tämän viivan pituus - + Radius to use to fillet the corners Nurkan pyöristyssäde - + Size of the chamfer to give to the corners Nurkkaviisteen mitta @@ -63,12 +63,12 @@ Kunkin reunan alaluokkien lukumäärä - - - - + + + + The area of this object Tämän kohteen pinta-ala @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Ympyrän säde - - + + Create a face Luo pinta @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Näytä yksittäiset sarjaelementit (ainoastaan Link-sarjat) @@ -984,33 +984,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text Tekstin koko - + The font of the text Tekstin kirjasin (font) + - The vertical alignment of the text Tekstin pystysuuntainen tasaus - + Text color Tekstin väri - + Line spacing (relative to font size) Riviväli (suhteessa fontin kokoon) @@ -1582,16 +1582,16 @@ from menu Tools -> Addon Manager Siirtymän suuntaa ei ole määritelty. Ole hyvä ja siirrä hiirtä objektin jommalle kummalle puolelle osoittaaksesi ensin suunnan - - + + True Tosi - - + + False Epätosi @@ -4279,13 +4279,13 @@ such as "Arial:Bold" - + mm mm @@ -4604,9 +4604,9 @@ from the Addon Manager. Salli FreeCAD:in automaattisesti ladata ja päivittää DXF-kirjastot + - Import options Tuontiasetukset @@ -5501,11 +5501,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy Kopio @@ -6180,41 +6180,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledtekstuuria ei voi ladata - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6637,6 +6637,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6649,15 +6650,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Väärä syöte: täytyy olla vektori. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6689,10 +6689,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6703,12 +6703,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Väärä syöte: täytyy olla numero. @@ -7248,10 +7248,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7344,8 +7344,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7473,8 +7473,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7565,8 +7565,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7820,8 +7820,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSiirrä - + Some subelements could not be moved. Some subelements could not be moved. @@ -7992,16 +7992,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8011,19 +8011,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8043,16 +8043,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8087,9 +8087,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8119,8 +8119,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8145,8 +8145,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index 1614496f87..825f5711e3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object The area of this object @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Create a face @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1590,16 +1590,16 @@ mula sa kasangkapan menu-> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Totoo - - + + False Hindi totoo @@ -4291,13 +4291,13 @@ such as "Arial:Bold" - + mm mm @@ -4616,9 +4616,9 @@ from the Addon Manager. Pahintulutan ang FreeCAD na awtomatikong i-download at i-update ang mga library ng DXF + - Import options Magpasok ng mga opsyon @@ -5513,11 +5513,11 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. + - Copy Kopya @@ -6193,41 +6193,41 @@ Pampook na x unable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6650,6 +6650,7 @@ Pampook na x + @@ -6662,15 +6663,14 @@ Pampook na x - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6702,10 +6702,10 @@ Pampook na x Wrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6716,12 +6716,12 @@ Pampook na x Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7261,10 +7261,10 @@ Pampook na x Arc by 3 points - - + + Pick first point Pick first point @@ -7357,8 +7357,8 @@ Pampook na x Select objects to trim or extend - + Pick distance Pick distance @@ -7486,8 +7486,8 @@ Pampook na x Stretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7578,8 +7578,8 @@ Pampook na x Create Rectangle - + Pick opposite point Pick opposite point @@ -7833,8 +7833,8 @@ Pampook na x Galawin - + Some subelements could not be moved. Some subelements could not be moved. @@ -8005,16 +8005,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8024,19 +8024,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8056,16 +8056,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8100,9 +8100,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8132,8 +8132,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8158,8 +8158,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 2082c3d5a4..e80b9f04db 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -39,16 +39,16 @@ La longueur de cette ligne - + Radius to use to fillet the corners Rayon à utiliser pour arrondir les coins - + Size of the chamfer to give to the corners Taille du chanfrein à attribuer aux coins @@ -63,12 +63,12 @@ Le nombre de subdivisions de chaque arête - - - - + + + + The area of this object La surface de cet objet @@ -270,10 +270,10 @@ ou à partir du sous-élément 'VertexN', 'EdgeN', ou 'FaceN', respectivement, s Rayon du cercle - - + + Create a face Créer une face @@ -325,8 +325,8 @@ ou à partir du sous-élément 'VertexN', 'EdgeN', ou 'FaceN', respectivement, s - + Show the individual array elements (only for Link arrays) Afficher les éléments individuels du réseau (uniquement pour les réseaux de liens) @@ -988,33 +988,33 @@ Cette propriété est en lecture seule, car le nombre dépend des points contenu Positionnement supplémentaire, déplacement et rotation, qui seront appliqués à chaque copie - + The size of the text La taille du texte - + The font of the text La police de caractère du texte + - The vertical alignment of the text L'alignement vertical du texte - + Text color Couleur du texte - + Line spacing (relative to font size) Interligne (par rapport à la taille de police) @@ -1583,16 +1583,16 @@ from menu Tools -> Addon Manager La direction de décalage n'est pas définie. Veuillez d'abord déplacer la souris de chaque côté de l'objet pour indiquer une direction - - + + True Vrai - - + + False Faux @@ -4279,13 +4279,13 @@ comme "Arial:Bold" - + mm mm @@ -4604,9 +4604,9 @@ Vous pouvez également le faire manuellement en installant l'établi "dxf_librar Permettre à FreeCAD de télécharger et mettre à jour automatiquement les librairies DXF + - Import options Options d'import @@ -5490,11 +5490,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy Copie @@ -6168,41 +6168,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledimpossible de charger la texture - - - + + + + - - - - + + + No active document. Aborting. Aucun document actif. Abandon. - - + - - + + + Wrong input: object not in document. Mauvaise entrée : l'objet n'est pas dans le document. @@ -6625,6 +6625,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6637,15 +6638,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Mauvaise entrée : doit être un vecteur. - + Wrong input: must be a placement, a vector, or a rotation. Mauvaise entrée : doit être un placement, un vecteur ou une rotation. @@ -6677,10 +6677,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMauvaise entrée : label_type doit être l'un des éléments suivants : - - + + Wrong input: must be a list of strings or a single string. Mauvaise entrée : doit être une liste de chaînes de caractères ou une seule chaîne de caractères. @@ -6691,12 +6691,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMauvaise entrée : doit être une chaîne selon : 'Horizontal', 'Vertical', ou 'Personnalisé'. + - - + Wrong input: must be a number. Mauvaise entrée : doit être un nombre. @@ -7236,10 +7236,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc par 3 points - - + + Pick first point Sélectionner le premier point @@ -7332,8 +7332,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSélectionner l'objet à réduire ou agrandir - + Pick distance Choisir la distance @@ -7461,8 +7461,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledÉtirer - + Please select exactly two objects, the base object and the path object, before calling this command. Veuillez sélectionner exactement deux objets, l'objet de base et l'objet courbe, avant d'appeler cette commande. @@ -7553,8 +7553,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCréer un Rectangle - + Pick opposite point Sélectionner le point opposé @@ -7808,8 +7808,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledDéplacer - + Some subelements could not be moved. Certains sous-éléments n’ont pas pu être déplacés. @@ -7980,16 +7980,16 @@ L'angle final sera l'angle de base plus cette quantité. Fractionner la ligne - - + + Task panel: Panneau des tâches : - - + + At least one element must be selected. Au moins un élément doit être sélectionné. @@ -7999,19 +7999,19 @@ L'angle final sera l'angle de base plus cette quantité. Le nombre d'éléments doit être d'au moins 1. - - + + Selection is not suitable for array. La sélection n'est pas adaptée pour un réseau. - - - - + + + + Object: Objet: @@ -8031,16 +8031,16 @@ L'angle final sera l'angle de base plus cette quantité. Intervalle Z réinitialisé : - - + + Fuse: Union: - - + + Create Link array: Créer un réseau de Liens : @@ -8075,9 +8075,9 @@ L'angle final sera l'angle de base plus cette quantité. Intervalle en Z : - - + + Aborted: Abandonné : @@ -8107,8 +8107,8 @@ L'angle final sera l'angle de base plus cette quantité. La distance tangentielle est négative. Elle est rendue positive pour continuer. - + Center reset: Réinitialisation du centre : @@ -8133,8 +8133,8 @@ L'angle final sera l'angle de base plus cette quantité. Paramètre de symétrie : - + Center of rotation: Centre de rotation : diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index 7bfeb84a54..9734c22bf6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Raio a usar para o chafrán arredondado dos recunchos - + Size of the chamfer to give to the corners Tamaño do chafrán para dar ós cantos @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object A área deste obxecto @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Raio do círculo - - + + Create a face Crear unha cara @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text Tamaño do texto - + The font of the text Fonte do texto + - The vertical alignment of the text Aliñamento vertical do texto - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1590,16 +1590,16 @@ dende menú de Ferramentas -> Xestión de complementos Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Verdadeiro - - + + False Falso @@ -4287,13 +4287,13 @@ such as "Arial:Bold" - + mm mm @@ -4612,9 +4612,9 @@ from the Addon Manager. Permitir que o FreeCAD baixe e actualice automaticamente as bibliotecas DXF + - Import options Opcións de importación @@ -5507,11 +5507,11 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si. + - Copy Copiar @@ -6186,41 +6186,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6643,6 +6643,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6655,15 +6656,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6695,10 +6695,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6709,12 +6709,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7254,10 +7254,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7350,8 +7350,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7479,8 +7479,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7571,8 +7571,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCrear Rectángulo - + Pick opposite point Pick opposite point @@ -7826,8 +7826,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMover - + Some subelements could not be moved. Some subelements could not be moved. @@ -7998,16 +7998,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8017,19 +8017,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Obxecto: @@ -8049,16 +8049,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fundir: - - + + Create Link array: Crear unha ligazón a unha matriz: @@ -8093,9 +8093,9 @@ The final angle will be the base angle plus this amount. Intervalo Z: - - + + Aborted: Abortado: @@ -8125,8 +8125,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8151,8 +8151,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Centro de rotación: diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 3c1f4ddb69..6d07249e3d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -39,16 +39,16 @@ Dužina ove linije - + Radius to use to fillet the corners Radijus koji se koristi za zaobljivanje uglova - + Size of the chamfer to give to the corners Veličina oluka obljivanje uglova @@ -63,12 +63,12 @@ Broj podjeljaka svakog ruba - - - - + + + + The area of this object Područje ovog objekta @@ -275,10 +275,10 @@ ili iz pod-elementa 'VrhN', 'RubN', odnosno 'LiceN', ako je navedeno. Polumjer kruga - - + + Create a face Napravite naličje @@ -330,8 +330,8 @@ ili iz pod-elementa 'VrhN', 'RubN', odnosno 'LiceN', ako je navedeno. - + Show the individual array elements (only for Link arrays) Prikaži pojedinačne elemente niza (samo za vezane nizove) @@ -1001,33 +1001,33 @@ Ovo svojstvo je samo za čitanje, budući da broj ovisi o točkama sadržanim un Dodatni položaj, pomak i rotacija, koji će se primijeniti na svaku kopiju - + The size of the text Veličina teksta - + The font of the text Vrsta pisma teksta + - The vertical alignment of the text Okomito poravnanje teksta - + Text color Boja teksta - + Line spacing (relative to font size) Razmak između redaka (u odnosu na veličinu fonta) @@ -1617,16 +1617,16 @@ iz izbornika Alati-> Addon Manager Smjer pomaka nije definiran. Prvo pomaknite miš s obje strane objekta kako biste naznačili smjer - - + + True Točno - - + + False Netočno @@ -4362,13 +4362,13 @@ kao što su "Arial:Bold" - + mm mm @@ -4689,9 +4689,9 @@ iz Upravitelja dodataka Omogući FreeCADu da automatski učita i nadogradi DXF biblioteke + - Import options Postavke uvoza @@ -5599,11 +5599,11 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes). + - Copy Kopiraj @@ -6280,41 +6280,41 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr nije moguće učitati teksturu - - - + + + + - - - - + + + No active document. Aborting. Nema aktivnog dokumenta. Prekid. - - + - - + + + Wrong input: object not in document. Pogrešan unos: objekt nije u dokumentu. @@ -6739,6 +6739,7 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr + @@ -6751,15 +6752,14 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr - Wrong input: must be a vector. Pogrešan unos: mora biti vektor. - + Wrong input: must be a placement, a vector, or a rotation. Pogrešan unos: mora biti položaj, vektor ili rotacija. @@ -6793,10 +6793,10 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr - - + + Wrong input: must be a list of strings or a single string. Pogrešan unos: mora biti popis znakova ili jedan znak. @@ -6807,12 +6807,12 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Pogrešan unos: mora biti slova, "Horizontalno", "Okomito" ili "Prilagođeno". + - - + Wrong input: must be a number. Pogrešan unos: mora bit broj. @@ -7354,10 +7354,10 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Luk iz 3 točke - - + + Pick first point Odaberite prvu točku @@ -7450,8 +7450,8 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Odaberite objekte za skraćivanje ili produživanje - + Pick distance Odaberite udaljenost @@ -7579,8 +7579,8 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Razvuci - + Please select exactly two objects, the base object and the path object, before calling this command. Molimo odaberite točno dva objekta, osnovni objekt i put objekt, prije pozivanja ove naredbe. @@ -7671,8 +7671,8 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Napravi pravokutnik - + Pick opposite point Odaberite suprotnu točku @@ -7926,8 +7926,8 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Pomicanje - + Some subelements could not be moved. Neke pod elemente nije bilo moguće pomjeriti. @@ -8098,16 +8098,16 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Razdvoji liniju - - + + Task panel: Ploča zadataka: - - + + At least one element must be selected. Barem jedna stavka mora biti označena. @@ -8117,19 +8117,19 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Broj elemenata mora biti najmanje 1. - - + + Selection is not suitable for array. Odabir nije prikladan za matricu. - - - - + + + + Object: Objekt: @@ -8149,16 +8149,16 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Interval Z resetirati: - - + + Fuse: Spoji: - - + + Create Link array: Stvori niz poveznica: @@ -8193,9 +8193,9 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Interval Z: - - + + Aborted: Obustavljeno: @@ -8225,8 +8225,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Tangencijalna udaljenost je negativna. biti će pozitivno napravljeno za nastaviti. - + Center reset: Ponovo postavljanje centra: @@ -8251,8 +8251,8 @@ Konačni kut bit će osnovni kut plus ovaj iznos. Parametar simetrije: - + Center of rotation: Centar rotacije: diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index cfa0067f76..1e1ec6f9a2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -39,16 +39,16 @@ Ennek a vonalnak a hossza - + Radius to use to fillet the corners Sarkok lekerekítéséhez használt rádiusz - + Size of the chamfer to give to the corners Sarkokhoz használt letörés mérete @@ -63,12 +63,12 @@ Minden él al-osztályainak száma - - - - + + + + The area of this object Ennek a tárgynak a területe @@ -270,10 +270,10 @@ vagy a 'VégpontN', 'ÉlN' vagy 'FelületN' al-elemből, ha megadott.Kör sugara - - + + Create a face Felület létrehozása @@ -325,8 +325,8 @@ vagy a 'VégpontN', 'ÉlN' vagy 'FelületN' al-elemből, ha megadott. - + Show the individual array elements (only for Link arrays) Az egyes tömbelemek megmutatása (csak csatolási tömbökhöz) @@ -991,33 +991,33 @@ Ez a tulajdonság csak olvasható, mert a szám a 'Pont tárgy' pontjaitól füg Az egyes másolati példányokon elvégzett további elhelyezés, elmozdítás és elforgatás - + The size of the text A szöveg mérete - + The font of the text A szöveg betütípusa + - The vertical alignment of the text A szöveg függőleges igazítása - + Text color Szöveg szín - + Line spacing (relative to font size) Egyenes illesztés (relatív a betűméretehez) @@ -1589,16 +1589,16 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Az eltolás iránya nem meghatározott. Először mozgassa az egeret a tárgy egyik oldalára, hogy meghatározza az irányt - - + + True Igaz - - + + False Hamis @@ -4286,13 +4286,13 @@ mint a " Arial: Dőlt " - + mm mm @@ -4611,9 +4611,9 @@ a Kiegészítők kezelőjéből. Engedélyezze a FreeCAD-hoz az automatikus DXF-könyvtárak letöltését és frissítését + - Import options Importálási beállítások @@ -5508,11 +5508,11 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. + - Copy Másolás @@ -6187,41 +6187,41 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve anyagminta betöltése sikertelen - - - + + + + - - - - + + + No active document. Aborting. Nincs aktív dokumentum. Megszakítás. - - + - - + + + Wrong input: object not in document. Helytelen bemenet: az tárgy nincs a dokumentumban. @@ -6644,6 +6644,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve + @@ -6656,15 +6657,14 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve - Wrong input: must be a vector. Rossz bemenet: vektornak kell lennie. - + Wrong input: must be a placement, a vector, or a rotation. Helytelen bemenet: elhelyezésnek, vektornak vagy forgatásnak kell lennie. @@ -6696,10 +6696,10 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Helytelen bevitel: label_type az alábbiak egyikének kell lennie: - - + + Wrong input: must be a list of strings or a single string. Helytelen bemenet: karakterláncnak vagy egyetlen karakternek kell lennie. @@ -6710,12 +6710,12 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Helytelen bemenet: karakterláncnak kell lennie, 'Vízszintes', 'Függőleges' vagy 'Egyéni'. + - - + Wrong input: must be a number. Rossz bemenet: számnak kell lennie. @@ -7255,10 +7255,10 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Körív 3 pontból - - + + Pick first point Első pont kiválasztása @@ -7351,8 +7351,8 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Válassza ki a tárgyakat a vágáshoz/nyújtáshoz - + Pick distance Távolság kiválasztása @@ -7480,8 +7480,8 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Nyújtás - + Please select exactly two objects, the base object and the path object, before calling this command. A parancs hívása előtt jelöljön ki pontosan két tárgyat, az alap tárgyat és az útvonal tárgyat. @@ -7572,8 +7572,8 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Téglalap rajzolása - + Pick opposite point Ellenkező pont kiválasztása @@ -7827,8 +7827,8 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Mozgat - + Some subelements could not be moved. Egyes al elemeket nem lehetett áthelyezni. @@ -7999,16 +7999,16 @@ A végső szög lesz az alapszög plusz ez az összege. Vonal felosztása - - + + Task panel: Feladat panel: - - + + At least one element must be selected. Legalább egy tételt ki kell választani. @@ -8018,19 +8018,19 @@ A végső szög lesz az alapszög plusz ez az összege. A tételek számának legalább 1-nek kell lennie. - - + + Selection is not suitable for array. A kijelölés nem alkalmas tömbökhöz. - - - - + + + + Object: Tárgy: @@ -8050,16 +8050,16 @@ A végső szög lesz az alapszög plusz ez az összege. Z intervallum alaphelyzetbe állítása: - - + + Fuse: Egybeolvaszt: - - + + Create Link array: Elrendezés csatolás létrehozása: @@ -8094,9 +8094,9 @@ A végső szög lesz az alapszög plusz ez az összege. Z intervallum: - - + + Aborted: Megszakított: @@ -8126,8 +8126,8 @@ A végső szög lesz az alapszög plusz ez az összege. Az érintő távolság negatív. Pozitívvá alakítva a továbblépéshez. - + Center reset: Középre visszaállítás: @@ -8152,8 +8152,8 @@ A végső szög lesz az alapszög plusz ez az összege. Szimmetria paraméter: - + Center of rotation: Forgatás középpontja: diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index b04d97927f..5b2bdf13d5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object Luas objek ini @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Create a face @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1588,16 +1588,16 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Benar - - + + False Salah @@ -4285,13 +4285,13 @@ such as "Arial:Bold" - + mm mm @@ -4610,9 +4610,9 @@ from the Addon Manager. Biarkan FreeCAD mendownload dan memperbarui perpustakaan DXF secara otomatis + - Import options Pilihan impor @@ -5502,11 +5502,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy Salinan @@ -6181,41 +6181,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6638,6 +6638,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6650,15 +6651,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6690,10 +6690,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6704,12 +6704,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7249,10 +7249,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7345,8 +7345,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7474,8 +7474,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7566,8 +7566,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7821,8 +7821,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledPindah - + Some subelements could not be moved. Some subelements could not be moved. @@ -7993,16 +7993,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8012,19 +8012,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8044,16 +8044,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8088,9 +8088,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8120,8 +8120,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8146,8 +8146,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 6fd2dd3062..e1fa4c9593 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -39,16 +39,16 @@ La lunghezza di questa linea - + Radius to use to fillet the corners Raggio da utilizzare per raccordare gli angoli - + Size of the chamfer to give to the corners Dimensione dello smusso da dare agli angoli @@ -63,12 +63,12 @@ Il numero di suddivisioni di ogni bordo - - - - + + + + The area of this object L'area di questo oggetto @@ -268,10 +268,10 @@ o dal sottoelemento 'VertexN', 'EdgeN', o 'FaceN', rispettivamente, se è specif Raggio del cerchio - - + + Create a face Crea una faccia @@ -323,8 +323,8 @@ o dal sottoelemento 'VertexN', 'EdgeN', o 'FaceN', rispettivamente, se è specif - + Show the individual array elements (only for Link arrays) Mostra i singoli elementi della serie (solo per le serie di link) @@ -985,33 +985,33 @@ Questa proprietà è di sola lettura, poiché il numero dipende dai punti conten Posizionamento, spostamento e rotazione aggiuntivi, che verranno applicati ad ogni copia - + The size of the text Dimensione del testo - + The font of the text Il carattere del testo + - The vertical alignment of the text L'allineamento verticale del testo - + Text color Colore testo - + Line spacing (relative to font size) Interlinea (relativo alla dimensione del carattere) @@ -1581,16 +1581,16 @@ dal menu Strumenti -> Addon Manager La direzione di Offset non è definita. Si prega di spostare il mouse su entrambi i lati dell'oggetto prima per indicare una direzione - - + + True Vero - - + + False Falso @@ -4278,13 +4278,13 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" - + mm mm @@ -4603,9 +4603,9 @@ da Addon Manager. Consenti a FreeCAD di scaricare e aggiornare automaticamente le librerie DXF + - Import options Opzioni di importazione @@ -5497,11 +5497,11 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì. + - Copy Copia @@ -6175,41 +6175,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledimpossibile caricare la texture - - - + + + + - - - - + + + No active document. Aborting. Nessun documento attivo. Chiusura in corso. - - + - - + + + Wrong input: object not in document. Input errato: oggetto non nel documento. @@ -6632,6 +6632,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6644,15 +6645,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Input errato: l'input deve essere un vettore. - + Wrong input: must be a placement, a vector, or a rotation. Input errato: deve essere un posizionamento, un vettore o una rotazione. @@ -6684,10 +6684,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledInput errato: label_type deve essere uno dei seguenti: - - + + Wrong input: must be a list of strings or a single string. Input errato: i dati di input devono essere una lista di stringhe o una stringa sola. @@ -6698,12 +6698,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledInput errato: deve essere una stringa, 'Horizontal', 'Vertical' o 'Custom'. + - - + Wrong input: must be a number. Input errato: il dato di input deve essere un numero. @@ -7243,10 +7243,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArco per 3 punti - - + + Pick first point Scegliere il primo punto @@ -7339,8 +7339,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSeleziona gli oggetti da tagliare o estendere - + Pick distance Scegliere la distanza @@ -7468,8 +7468,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStira - + Please select exactly two objects, the base object and the path object, before calling this command. Si prega di selezionare esattamente due oggetti, l'oggetto base e l'oggetto tracciato, prima di chiamare questo comando. @@ -7560,8 +7560,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCrea Rettangolo - + Pick opposite point Scegliere il punto opposto @@ -7815,8 +7815,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSposta - + Some subelements could not be moved. Alcuni sottoelementi non possono essere spostati. @@ -7987,16 +7987,16 @@ L'angolo finale sarà l'angolo base più questa quantità. Dividi linea - - + + Task panel: Pannello attività: - - + + At least one element must be selected. Almeno un elemento deve essere selezionato. @@ -8006,19 +8006,19 @@ L'angolo finale sarà l'angolo base più questa quantità. Il numero di elementi deve essere almeno 1. - - + + Selection is not suitable for array. La selezione non è adatta per la Serie. - - - - + + + + Object: Oggetto: @@ -8038,16 +8038,16 @@ L'angolo finale sarà l'angolo base più questa quantità. Ripristino Intervallo Z: - - + + Fuse: Fusione: - - + + Create Link array: Crea una Serie di Link: @@ -8082,9 +8082,9 @@ L'angolo finale sarà l'angolo base più questa quantità. Intervallo Z: - - + + Aborted: Interrotto: @@ -8114,8 +8114,8 @@ L'angolo finale sarà l'angolo base più questa quantità. La distanza tangenziale è negativa. Viene resa positiva per procedere. - + Center reset: Ripristino Centro: @@ -8140,8 +8140,8 @@ L'angolo finale sarà l'angolo base più questa quantità. Parametro simmetria: - + Center of rotation: Centro di rotazione: diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index dee1a3f1b7..4af4f974b0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -39,16 +39,16 @@ この線の長さ - + Radius to use to fillet the corners 角のフィレットで使用する半径 - + Size of the chamfer to give to the corners 角の面取りのサイズ @@ -63,12 +63,12 @@ 各エッジの再分割数 - - - - + + + + The area of this object このオブジェクトの面積 @@ -269,10 +269,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp 円の半径 - - + + Create a face 面を作成 @@ -324,8 +324,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) 個々の整列要素を表示 (リンク整列のみ) @@ -981,33 +981,33 @@ This property is read-only, as the number depends on the points contained within 各コピーに適用される追加の配置、平行移動、回転。 - + The size of the text テキストのサイズ - + The font of the text テキストのフォント + - The vertical alignment of the text テキストの垂直方向の位置 - + Text color テキストの色 - + Line spacing (relative to font size) 行間隔(フォント サイズに対する相対値) @@ -1576,16 +1576,16 @@ from menu Tools -> Addon Manager オフセット方向が定義されていません。最初にオブジェクトのどちらか一方にマウスを動かして方向を指定してください。 - - + + True True - - + + False False @@ -4250,13 +4250,13 @@ such as "Arial:Bold" - + mm mm @@ -4576,9 +4576,9 @@ from the Addon Manager. DXF ライブラリの自動的なダウンロードと更新を FreeCAD に許可 + - Import options インポート・オプション @@ -5468,11 +5468,11 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた + - Copy コピー @@ -6147,41 +6147,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. アクティブなドキュメントがありません。中止しています。 - - + - - + + + Wrong input: object not in document. 間違った入力：オブジェクトがドキュメント内にありません。 @@ -6604,6 +6604,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6616,15 +6617,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. 誤った入力: ベクトルでなければなりません。 - + Wrong input: must be a placement, a vector, or a rotation. 誤った入力: 位置、ベクトル、または回転でなければなりません。 @@ -6656,10 +6656,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. 誤った入力: 文字列リストまたは文字列でなければなりません。 @@ -6670,12 +6670,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled誤った入力: 「Horizontal」「Vertical」「Custom」のいずれかの文字列でなければなりません。 + - - + Wrong input: must be a number. 誤った入力: 数値でなければなりません。 @@ -7215,10 +7215,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabled3点から決まる円弧 - - + + Pick first point 最初の点を選択 @@ -7311,8 +7311,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledトリムまたは伸縮するオブジェクトを選択 - + Pick distance 距離を選択 @@ -7440,8 +7440,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabled伸縮 - + Please select exactly two objects, the base object and the path object, before calling this command. このコマンドを呼び出す前に、ベース・オブジェクトとパス・オブジェクトの2つのオブジェクトを選択してください。 @@ -7532,8 +7532,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabled長方形を作成 - + Pick opposite point 反対側の点を選択 @@ -7787,8 +7787,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabled移動 - + Some subelements could not be moved. 一部のサブ要素を移動できませんでした。 @@ -7959,16 +7959,16 @@ The final angle will be the base angle plus this amount. 線を分割 - - + + Task panel: タスクパネル: - - + + At least one element must be selected. 少なくとも1つの要素を選択する必要があります。 @@ -7978,19 +7978,19 @@ The final angle will be the base angle plus this amount. 要素の数は少なくとも1でなければなりません。 - - + + Selection is not suitable for array. 選択したものは整列に適していません。 - - - - + + + + Object: オブジェクト: @@ -8010,16 +8010,16 @@ The final angle will be the base angle plus this amount. 間隔 Z リセット: - - + + Fuse: 結合: - - + + Create Link array: リンク整列を作成: @@ -8054,9 +8054,9 @@ The final angle will be the base angle plus this amount. 間隔 Z: - - + + Aborted: 中断: @@ -8086,8 +8086,8 @@ The final angle will be the base angle plus this amount. 接線方向距離がマイナスです。処理を続けるためプラスにします。 - + Center reset: 中心リセット: @@ -8112,8 +8112,8 @@ The final angle will be the base angle plus this amount. 対称パラメーター: - + Center of rotation: 回転中心: diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index 26c46f6d9f..4ba6090a84 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -39,16 +39,16 @@ ამ ხაზის სიგრძე - + Radius to use to fillet the corners კუთხის მომგვალების რადიუსი - + Size of the chamfer to give to the corners კუთხეებისთვის მისაცემი ნაზოლის ზომა @@ -63,12 +63,12 @@ თითოეული წიბოს ქვედანაყოფების რიცხვი - - - - + + + + The area of this object ობიექტის ფართობი @@ -268,10 +268,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp წრის რადიუსი - - + + Create a face ზედაპირის შექმნა @@ -323,8 +323,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) მასივის ელემენტების ჩვენება (მხოლოდ ბმულების მასივებისთვის) @@ -984,33 +984,33 @@ This property is read-only, as the number depends on the points contained within დამატებითი განთავსება, წანაცვლება და ბრუნვა, რომელიც გადატარდება იქნება თითოეულ ასლზე - + The size of the text ტექსტის ზომა - + The font of the text ტექსტის ფონტი + - The vertical alignment of the text ტექსტის ვერტიკალური სწორება - + Text color ტექსტის ფერი - + Line spacing (relative to font size) სტრიქონებს შორის მანძილი (ფონტის ზომასთან შედარებით) @@ -1582,16 +1582,16 @@ from menu Tools -> Addon Manager წანაცვლების მიმართულება აღწერილი არაა. მის მისათითებლად თაგუნა ობიექტის რომელიმე მხარეს, საჭირო მიმართულებით გაამოძრავეთ - - + + True ჭეშმარიტი - - + + False ცრუ @@ -4277,13 +4277,13 @@ such as "Arial:Bold" - + mm მმ @@ -4600,9 +4600,9 @@ from the Addon Manager. FreeCAD-სთვის DXF ბიბლიოთეკების ავტომატური გადმოწერის და განახლების უფლების მიცემა + - Import options შემოტანის პარამეტრები @@ -5495,11 +5495,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy კოპირება @@ -6173,41 +6173,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledტექსტურის ჩატვირთვის შეცდომა - - - + + + + - - - - + + + No active document. Aborting. აქტიური დოკუმენტის გარეშე. გაუქმება. - - + - - + + + Wrong input: object not in document. არასწორი შეყვანა: ობიექტი დოკუმენტში არაა. @@ -6630,6 +6630,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6642,15 +6643,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. არასწორი შეყვანა: უნდა იყოს ვექტორი. - + Wrong input: must be a placement, a vector, or a rotation. არასწორი შეყვანა: უნდა იყოს მდებარეობა, ვექტორი ან ბრუნვა. @@ -6682,10 +6682,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledარასწორი შეყვანა: label_type უნდა იყოს ერთერთი: - - + + Wrong input: must be a list of strings or a single string. არასწორი შეყვანა: უნდა იყოს სტრიქონების სია ან ერთი სტრიქონი. @@ -6696,12 +6696,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledარასწორი შეყვანა: უნდა იყოს სტრიქონი, 'ჰორიზონტალური', 'ვერტიკალური' ან 'ხელით'. + - - + Wrong input: must be a number. არასწორი შეყვანა: უნდა იყოს რიცხვი. @@ -7241,10 +7241,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledრკალი 3 წერტილით - - + + Pick first point აირჩიეთ პირველი წერტილი @@ -7337,8 +7337,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledაირჩიეთ გასაფართოებელი ან შესავიწროებელი ობიექტები - + Pick distance აირჩიეთ დაშორება @@ -7466,8 +7466,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledგაწელვა - + Please select exactly two objects, the base object and the path object, before calling this command. ამ ბრძანების გამოძახებამდე აირჩიეთ ორი ობიექტი: საბაზისო ობიექტი და ტრაექტორია. @@ -7558,8 +7558,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledოთხკუთხედის შექმნა - + Pick opposite point აირჩიეთ საპირისპირო წერტილი @@ -7813,8 +7813,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledგადატანა - + Some subelements could not be moved. ზოგიერთი ქვეელემენტის გადატანა შეუძლებელია. @@ -7985,16 +7985,16 @@ The final angle will be the base angle plus this amount. ხაზის გაყოფა - - + + Task panel: ამოცანების ზოლი: - - + + At least one element must be selected. არჩეული უნდა იყოს მინიმუმ ერთი ელემენტი. @@ -8004,19 +8004,19 @@ The final angle will be the base angle plus this amount. ელემენტების რაოდენობა, რომლებბიც 1 მაინც უნდა იყოს. - - + + Selection is not suitable for array. მონიშნული მასივის მოთხოვნებს არ შეესაბამება. - - - - + + + + Object: ობიექტი: @@ -8036,16 +8036,16 @@ The final angle will be the base angle plus this amount. Z კოორდინატის საწყის მნიშვნელობაზე დაბრუნების ინტერვალი: - - + + Fuse: შერწყმა: - - + + Create Link array: ბმულების მასივის შექმნა: @@ -8080,9 +8080,9 @@ The final angle will be the base angle plus this amount. Z ინტერვალი: - - + + Aborted: შეწყვეტილია: @@ -8112,8 +8112,8 @@ The final angle will be the base angle plus this amount. ტანგენციალური მანძილის მნიშვნელობა უარყოფითია. ოპერაციის გასაგრძელებლად ის დადებითი გახდა. - + Center reset: ცენტრის საწყის ადგილას დაბრუნება: @@ -8138,8 +8138,8 @@ The final angle will be the base angle plus this amount. სიმეტრიის პარამეტრი: - + Center of rotation: შებრუნების ცენტრი: diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index 8cf5477673..aeff6a6c31 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Naudojamas spindulys kampų suapvalinimui - + Size of the chamfer to give to the corners Nuosklembos plotis iki kampų @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object The area of this object @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Create a face @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1589,16 +1589,16 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Tiesa - - + + False Netiesta @@ -4289,13 +4289,13 @@ such as "Arial:Bold" - + mm mm @@ -4614,9 +4614,9 @@ from the Addon Manager. Leisti FreeCAD pačiam atsisiųsti ir atnaujinti DXF bibliotekas + - Import options Import options @@ -5511,11 +5511,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy Kopijuoti @@ -6190,41 +6190,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6647,6 +6647,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6659,15 +6660,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6699,10 +6699,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6713,12 +6713,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7258,10 +7258,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7354,8 +7354,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7483,8 +7483,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7575,8 +7575,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7830,8 +7830,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledPerkelti - + Some subelements could not be moved. Some subelements could not be moved. @@ -8002,16 +8002,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8021,19 +8021,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8053,16 +8053,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8097,9 +8097,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8129,8 +8129,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8155,8 +8155,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 5f46cd4565..b7167f705c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -39,16 +39,16 @@ De lengte van deze lijn - + Radius to use to fillet the corners Radius waarmee de hoeken worden afgerond - + Size of the chamfer to give to the corners De grote waarmee de hoeken worden afgeschuind @@ -63,12 +63,12 @@ Het aantal onderverdelingen van elke rand - - - - + + + + The area of this object Het oppervlak van dit object @@ -270,10 +270,10 @@ of vanaf de subelement 'VertexN', 'EdgeN', respectievelijk 'FaceN', als deze is Straal van de cirkel - - + + Create a face Maak een vlak @@ -325,8 +325,8 @@ of vanaf de subelement 'VertexN', 'EdgeN', respectievelijk 'FaceN', als deze is - + Show the individual array elements (only for Link arrays) Toon de afzonderlijke reeks elementen (alleen voor link reeksen) @@ -989,33 +989,33 @@ Deze eigenschap is alleen-lezen, omdat het getal afhankelijk is van de punten in Aanvullende plaatsing, verschuiving en rotatie, die zal worden toegepast op elke kopie - + The size of the text De grootte van de tekst - + The font of the text Het lettertype van de tekst + - The vertical alignment of the text De verticale uitlijning van de tekst - + Text color Tekst kleur - + Line spacing (relative to font size) Lijn afstand (ten opzichte van de lettergrootte) @@ -1587,16 +1587,16 @@ vanuit het menu Tools -> Addon Manager Offset richting is niet gedefinieerd. Beweeg de muis aan een van de zijden van het object eerst om een richting aan te geven - - + + True Waar - - + + False Onwaar @@ -4282,13 +4282,13 @@ such as "Arial:Bold" - + mm mm @@ -4607,9 +4607,9 @@ te installeren vanuit de Uitbreidingsmanager. Sta FreeCAD toe om de DXF-bibliotheken automatisch te downloaden en bij te werken + - Import options Importeeropties @@ -5504,11 +5504,11 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< + - Copy Kopie @@ -6183,41 +6183,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. Geen actief document. Breekt hier af. - - + - - + + + Wrong input: object not in document. Verkeerde invoer: object niet in document. @@ -6640,6 +6640,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6652,15 +6653,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Verkeerde invoer: moet een vector zijn. - + Wrong input: must be a placement, a vector, or a rotation. Verkeerde invoer: moet een plaatsing, een vector, of een rotatie zijn. @@ -6692,10 +6692,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Verkeerde invoer: moet een lijst van tekenreeksen of een enkele tekenreeks zijn. @@ -6706,12 +6706,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledVerkeerde invoer: moet een tekenreeks, 'Horizontaal', 'Verticaal' of 'Aangepast' zijn. + - - + Wrong input: must be a number. Verkeerde invoer: moet een getal zijn. @@ -7251,10 +7251,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledBoog met 3 punten - - + + Pick first point Kies het eerste punt @@ -7347,8 +7347,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelecteer objecten om te trimmen of uit te breiden - + Pick distance Kies afstand @@ -7476,8 +7476,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUitrekken - + Please select exactly two objects, the base object and the path object, before calling this command. Selecteer precies twee objecten, het basis object en het pad object, voordat u deze opdracht aanroept. @@ -7568,8 +7568,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledRechthoek maken - + Pick opposite point Kies het tegenovergestelde punt @@ -7823,8 +7823,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledVerplaatsen - + Some subelements could not be moved. Sommige subelementen konden niet verplaatst worden. @@ -7995,16 +7995,16 @@ De eindhoek zal de basishoek plus dit getal zijn. Lijn splitsen - - + + Task panel: Taakpaneel: - - + + At least one element must be selected. Ten minste één element moet worden geselecteerd. @@ -8014,19 +8014,19 @@ De eindhoek zal de basishoek plus dit getal zijn. Aantal elementen moet minimaal 1 zijn. - - + + Selection is not suitable for array. Selectie is niet geschikt voor reeks. - - - - + + + + Object: Object: @@ -8046,16 +8046,16 @@ De eindhoek zal de basishoek plus dit getal zijn. Interval Z opnieuw instellen: - - + + Fuse: Samenvoegen: - - + + Create Link array: Link reeks aanmaken: @@ -8090,9 +8090,9 @@ De eindhoek zal de basishoek plus dit getal zijn. Z-interval: - - + + Aborted: Afgebroken: @@ -8122,8 +8122,8 @@ De eindhoek zal de basishoek plus dit getal zijn. Tangential distance is negatief, het is positief gemaakt om verder te gaan. - + Center reset: Middelpunt reset: @@ -8148,8 +8148,8 @@ De eindhoek zal de basishoek plus dit getal zijn. Symmetrie parameter: - + Center of rotation: Midden van rotatie: diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 3a5a648ac0..d29e9a293e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -39,16 +39,16 @@ Długość tej linii - + Radius to use to fillet the corners Promień użyty do zaokrąglenia narożników - + Size of the chamfer to give to the corners Rozmiar fazy, którą należy nadać narożnikom @@ -63,12 +63,12 @@ Liczba podziałów każdej krawędzi - - - - + + + + The area of this object Obszar tego obiektu @@ -270,10 +270,10 @@ lub z elementu podrzędnego "VertexN", "EdgeN" lub "FaceN", jeśli jest określo Promień okręgu - - + + Create a face Utwórz ścianę @@ -325,8 +325,8 @@ lub z elementu podrzędnego "VertexN", "EdgeN" lub "FaceN", jeśli jest określo - + Show the individual array elements (only for Link arrays) Pokaż poszczególne elementy tablicy (tylko dla tablic linków) @@ -990,33 +990,33 @@ Tę właściwość można tylko przeglądać, ponieważ liczba jest zależna od Dodatkowe rozmieszczenie, przesunięcie i obrót, które zostaną zastosowane do każdej kopii - + The size of the text Rozmiar tekstu - + The font of the text Czcionka tekstu + - The vertical alignment of the text Wyrównanie tekstu w pionie - + Text color Kolor tekstu - + Line spacing (relative to font size) Odstęp między wierszami (w stosunku do rozmiaru czcionki) @@ -1586,16 +1586,16 @@ z menu Przybory -> Menedżer dodatków Kierunek odsunięcia nie jest zdefiniowany. Proszę przesuń kursor myszki do wewnątrz lub na zewnątrz obiektu, aby wskazać kierunek - - + + True Tak - - + + False Nie @@ -4285,13 +4285,13 @@ lub rodziny, jak np. "Arial, Helvetica, sans" lub nazwa w stylu np. "Arial: Bold - + mm mm @@ -4613,9 +4613,9 @@ z Menedżera dodatków. Pozwól programowi FreeCAD na automatyczne pobieranie i aktualizację bibliotek DXF + - Import options Opcje importu @@ -5509,11 +5509,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy Kopiuj @@ -6188,41 +6188,41 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele nie można załadować tekstury - - - + + + + - - - - + + + No active document. Aborting. Brak aktywnego dokumentu. Przerwanie. - - + - - + + + Wrong input: object not in document. Nieprawidłowe dane wejściowe: obiektu nie ma w dokumencie. @@ -6645,6 +6645,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele + @@ -6657,15 +6658,14 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele - Wrong input: must be a vector. Błędne wejście: musi być wektorem. - + Wrong input: must be a placement, a vector, or a rotation. Nieprawidłowe dane wejściowe: musi być umiejscowieniem, wektorem lub obrotem. @@ -6697,10 +6697,10 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Nieprawidłowe dane wejściowe: typ_etykiety musi być jednym z następujących: - - + + Wrong input: must be a list of strings or a single string. Nieprawidłowe dane wejściowe: musi być listą ciągów znaków lub pojedynczym ciągiem znaków. @@ -6711,12 +6711,12 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Nieprawidłowe dane wejściowe: spodziewany ciąg znaków 'Poziomy', 'Pionowy' lub 'Niestandardowy'. + - - + Wrong input: must be a number. Błędne wejście: musi być liczbą. @@ -7256,10 +7256,10 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Łuk przez trzy punkty - - + + Pick first point Wybierz pierwszy punkt @@ -7352,8 +7352,8 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Wybierz obiekty do przycięcia lub wydłużenia - + Pick distance Wybierz odległość @@ -7481,8 +7481,8 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Rozciągnij - + Please select exactly two objects, the base object and the path object, before calling this command. Przed wywołaniem tego polecenia należy wybrać dokładnie dwa obiekty, obiekt bazowy i obiekt ścieżki. @@ -7573,8 +7573,8 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Utwórz prostokąt - + Pick opposite point Wybierz przeciwległy punkt @@ -7828,8 +7828,8 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Przesuń - + Some subelements could not be moved. Niektóre elementy podrzędne nie mogły być przeniesione. @@ -8000,16 +8000,16 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Podziel linię - - + + Task panel: Panel zadań: - - + + At least one element must be selected. Należy wybrać co najmniej jeden element. @@ -8019,19 +8019,19 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Liczba elementów musi wynosić co najmniej 1. - - + + Selection is not suitable for array. Wybór nie jest odpowiedni dla szyku. - - - - + + + + Object: Obiekt: @@ -8051,16 +8051,16 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Odstęp Z zresetowany: - - + + Fuse: Scalenie: - - + + Create Link array: Utwórz szyk odnośników: @@ -8095,9 +8095,9 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Odstęp Z: - - + + Aborted: Przerwano: @@ -8127,8 +8127,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Styczna odległość jest ujemna. Należy ją uczynić dodatnią, aby kontynuować. - + Center reset: Resetowanie środka: @@ -8153,8 +8153,8 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.Parametry symetrii: - + Center of rotation: Środek obrotu: diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 3fc93acb25..408fccee7f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -39,16 +39,16 @@ O comprimento desta linha - + Radius to use to fillet the corners O raio usado para arredondar os cantos - + Size of the chamfer to give to the corners Tamanho do chanfro nos cantos @@ -63,12 +63,12 @@ O número de subdivisões de cada aresta - - - - + + + + The area of this object A área deste objeto @@ -270,10 +270,10 @@ ou do subelemento 'VertexN', 'EdgeN', ou 'FaceN', respectivamente, se for especi Raio do círculo - - + + Create a face Criar uma face @@ -325,8 +325,8 @@ ou do subelemento 'VertexN', 'EdgeN', ou 'FaceN', respectivamente, se for especi - + Show the individual array elements (only for Link arrays) Mostrar os elementos individuais (somente para redes de links) @@ -991,33 +991,33 @@ Esta propriedade é somente leitura, já que o número depende dos outros parâm Localizador, deslocamento e rotação adicionais, que serão aplicados a cada cópia - + The size of the text O tamanho do texto - + The font of the text A fonte do texto + - The vertical alignment of the text O alinhamento vertical do texto - + Text color Cor do texto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) @@ -1586,16 +1586,16 @@ no menu ferramentas-> Addon Manager Direção do deslocamento não definida. Por favor, mova o mouse de ambos os lados do objeto primeiro para indicar uma direção - - + + True Verdadeiro - - + + False Falso @@ -4274,13 +4274,13 @@ such as "Arial:Bold" - + mm mm @@ -4599,9 +4599,9 @@ do Gerenciador de Complementos. Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF + - Import options Opções de importação @@ -5495,11 +5495,11 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. + - Copy Copiar @@ -6173,41 +6173,41 @@ Not available if Draft preference option 'Use Part Primitives' is enablednão foi possível carregar a textura - - - + + + + - - - - + + + No active document. Aborting. Nenhum documento ativo. Abortando. - - + - - + + + Wrong input: object not in document. Entrada errada: objeto não está no documento. @@ -6630,6 +6630,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6642,15 +6643,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Entrada errada: deve ser um vetor. - + Wrong input: must be a placement, a vector, or a rotation. Entrada errada: deve ser um localizador, um vetor ou uma rotação. @@ -6682,10 +6682,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada errada: label_type deve ser um dos seguintes: - - + + Wrong input: must be a list of strings or a single string. Entrada errada: deve ser uma lista de textos ou um único texto. @@ -6696,12 +6696,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEntrada errada: deve ser um texto: 'Horizontal', 'Vertical', ou 'Custom'. + - - + Wrong input: must be a number. Entrada errada: deve ser um número. @@ -7241,10 +7241,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArco de 3 pontos - - + + Pick first point Indique o primeiro ponto @@ -7337,8 +7337,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelecione objetos para aparar/estender - + Pick distance Indique a distância @@ -7466,8 +7466,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledEsticar - + Please select exactly two objects, the base object and the path object, before calling this command. Por favor, selecione exatamente dois objetos, o objeto base e o objeto de trajetória, antes de chamar este comando. @@ -7558,8 +7558,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCriar um retângulo - + Pick opposite point Indique o ponto oposto @@ -7813,8 +7813,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMover - + Some subelements could not be moved. Alguns sub-elementos não puderam ser movidos. @@ -7984,16 +7984,16 @@ The final angle will be the base angle plus this amount. Dividir linha - - + + Task panel: Painel de tarefas: - - + + At least one element must be selected. Pelo menos um elemento deve ser selecionado. @@ -8003,19 +8003,19 @@ The final angle will be the base angle plus this amount. O número de elementos deve ser pelo menos 1. - - + + Selection is not suitable for array. A seleção não é adequada para criar uma rede. - - - - + + + + Object: Objeto: @@ -8035,16 +8035,16 @@ The final angle will be the base angle plus this amount. Redefinição do intervalo Z: - - + + Fuse: Fundir: - - + + Create Link array: Rede de trajetória link: @@ -8079,9 +8079,9 @@ The final angle will be the base angle plus this amount. Intervalo Z: - - + + Aborted: Cancelado: @@ -8111,8 +8111,8 @@ The final angle will be the base angle plus this amount. A distância tangencial é negativa, foi tornada positiva para prosseguir. - + Center reset: Redefinição do centro: @@ -8137,8 +8137,8 @@ The final angle will be the base angle plus this amount. Parâmetro do simetria: - + Center of rotation: Centro de rotação: diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index e711707c56..b9327cd15d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -39,16 +39,16 @@ O comprimento desta linha - + Radius to use to fillet the corners Raio a usar para Bolear (fillet) os cantos - + Size of the chamfer to give to the corners Tamanho do chanfro a aplicar aos cantos @@ -63,12 +63,12 @@ O número de sub-divisões de cada aresta - - - - + + + + The area of this object A área deste objeto @@ -270,10 +270,10 @@ ou do subelemento 'VertexN', 'EdgeN', ou 'FaceN', respectivamente, se for especi Raio do círculo - - + + Create a face Criar uma face @@ -325,8 +325,8 @@ ou do subelemento 'VertexN', 'EdgeN', ou 'FaceN', respectivamente, se for especi - + Show the individual array elements (only for Link arrays) Mostrar os elementos de matriz individuais (somente para Variáveis de Ligação) @@ -990,33 +990,33 @@ Esta propriedade é apenas-de-leitura, já que o número depende dos pontos cont Posição, deslocamento e rotação adicionais, que serão aplicados a cada cópia - + The size of the text O tamanho do texto - + The font of the text O tipo de letra do texto + - The vertical alignment of the text O alinhamento vertical do texto - + Text color Cor do texto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) @@ -1585,16 +1585,16 @@ from menu Tools -> Addon Manager Direção do deslocamento não definida. Por favor, mova o rato de ambos os lados do primeiro objeto para indicar uma direção - - + + True Verdadeiro - - + + False Falso @@ -4279,13 +4279,13 @@ such as "Arial:Bold" - + mm mm @@ -4604,9 +4604,9 @@ from the Addon Manager. Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF + - Import options Opções de importação @@ -5497,11 +5497,11 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. + - Copy Copiar @@ -6176,41 +6176,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6633,6 +6633,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6645,15 +6646,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6685,10 +6685,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6699,12 +6699,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7244,10 +7244,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArco por 3 pontos - - + + Pick first point Pick first point @@ -7340,8 +7340,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7469,8 +7469,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7561,8 +7561,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCriar Retângulo - + Pick opposite point Pick opposite point @@ -7816,8 +7816,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMover - + Some subelements could not be moved. Some subelements could not be moved. @@ -7988,16 +7988,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8007,19 +8007,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8039,16 +8039,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8083,9 +8083,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8115,8 +8115,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8141,8 +8141,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 05a21876c4..ee3069993e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -39,16 +39,16 @@ Lungimea acestei linii - + Radius to use to fillet the corners Raza de utilizat pentru a rotunji colţurile - + Size of the chamfer to give to the corners Dimensiunea șanfrenului care să se aplice colțurilor @@ -63,12 +63,12 @@ Numărul de subdiviziuni ale fiecărei muchii - - - - + + + + The area of this object Aria acestui obiect @@ -269,10 +269,10 @@ sau din subelementul „VertexN”, „MuchieN”, respectiv „FațaN”, dacă Raza cercului - - + + Create a face Creaţi o față @@ -324,8 +324,8 @@ sau din subelementul „VertexN”, „MuchieN”, respectiv „FațaN”, dacă - + Show the individual array elements (only for Link arrays) Arată elementele individuale din matrice (numai pentru Matricele Legătură) @@ -990,33 +990,33 @@ Această proprietate este doar pentru citire, deoarece numărul depinde de punct Additional placement, shift and rotation, that will be applied to each copy - + The size of the text Dimensiunea textului - + The font of the text Fontul textului + - The vertical alignment of the text Alinierea verticală a textului - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1586,16 +1586,16 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Adevărat - - + + False Fals @@ -4285,13 +4285,13 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s - + mm mm @@ -4610,9 +4610,9 @@ din Managerul de Suplimente. Permite FreeCAD să descarce automat și să actualizeze bibliotecile DXF + - Import options Importare opțiuni @@ -5500,11 +5500,11 @@ To enabled FreeCAD to download these libraries, answer Yes. + - Copy Copiere @@ -6179,41 +6179,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6636,6 +6636,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6648,15 +6649,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6688,10 +6688,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6702,12 +6702,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7247,10 +7247,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7343,8 +7343,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7472,8 +7472,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7564,8 +7564,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7819,8 +7819,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMută - + Some subelements could not be moved. Some subelements could not be moved. @@ -7991,16 +7991,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8010,19 +8010,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8042,16 +8042,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8086,9 +8086,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8118,8 +8118,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8144,8 +8144,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 3b3b55be81..8351138e5e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -39,16 +39,16 @@ Длина линии - + Radius to use to fillet the corners Радиус скругления углов - + Size of the chamfer to give to the corners Размер фаски углов @@ -63,12 +63,12 @@ Количество делений каждого ребра - - - - + + + + The area of this object Площадь объекта @@ -268,10 +268,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Радиус окружности - - + + Create a face Создать грань @@ -323,8 +323,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Показать элементы массива (только для массивов ссылок) @@ -988,33 +988,33 @@ This property is read-only, as the number depends on the points contained within Дополнительные размещение, сдвиг и вращение, применяемые к каждой копии - + The size of the text Размер текста - + The font of the text Шрифт текста + - The vertical alignment of the text Вертикальное выравнивание текста - + Text color Цвет текста - + Line spacing (relative to font size) Межстрочный интервал (относительно размера шрифта) @@ -1582,16 +1582,16 @@ from menu Tools -> Addon Manager Направление смещения не определено. Пожалуйста, сначала переместите мышку в любую сторону от объекта, чтобы указать направление - - + + True Да - - + + False Нет @@ -4263,13 +4263,13 @@ such as "Arial:Bold" - + mm мм @@ -4588,9 +4588,9 @@ from the Addon Manager. Автоматически загружать и обновлять библиотеки DXF + - Import options Параметры импорта @@ -5478,11 +5478,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy Копировать @@ -6156,41 +6156,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledневозможно загрузить текстуру - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6613,6 +6613,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6625,15 +6626,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6665,10 +6665,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6679,12 +6679,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7224,10 +7224,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledДуга по 3 точкам - - + + Pick first point Укажите первую точку @@ -7320,8 +7320,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7449,8 +7449,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledРастянуть - + Please select exactly two objects, the base object and the path object, before calling this command. Перед вызовом этой команды выберите два объекта: базовый объект и объект являющейся путем. @@ -7541,8 +7541,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledСоздать Прямоугольник - + Pick opposite point Укажите противоположную точку @@ -7796,8 +7796,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledПереместить - + Some subelements could not be moved. Some subelements could not be moved. @@ -7968,16 +7968,16 @@ The final angle will be the base angle plus this amount. Разделить линию - - + + Task panel: Панель задач: - - + + At least one element must be selected. At least one element must be selected. @@ -7987,19 +7987,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Объект: @@ -8019,16 +8019,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8063,9 +8063,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Отменено: @@ -8095,8 +8095,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8121,8 +8121,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Центр вращения: diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index 831ede2df7..4dc3a5a389 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index bd6e452c70..adde2d8455 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -39,16 +39,16 @@ Dolžina te črte - + Radius to use to fillet the corners Polmer zaokroževanja vogalov - + Size of the chamfer to give to the corners Velikost posnetja vogalov @@ -63,12 +63,12 @@ Število razdelitev vsakega roba - - - - + + + + The area of this object Območje tega objekta @@ -270,10 +270,10 @@ ali s podprvine "NOglišč", "NRobov" ali "NPloskev", če je določeno.Polmer kroga - - + + Create a face Ustvari ploskev @@ -325,8 +325,8 @@ ali s podprvine "NOglišč", "NRobov" ali "NPloskev", če je določeno. - + Show the individual array elements (only for Link arrays) Pokaži posamezne predmete razpostavitve (le pri Vezanih razpostavitvah) @@ -986,33 +986,33 @@ Ta lastnost je le za branje, saj je število odvisno od točk znotraj "Točkovne Dodatni zamik, postavitev in zasuk, ki bodo uveljavljeni pri vsakem dvojniku - + The size of the text Velikost pisave - + The font of the text Vrsta pisave + - The vertical alignment of the text Navpična poravnava besedila - + Text color Barva besedila - + Line spacing (relative to font size) Medvrstični razmik (glede na velikost pisave) @@ -1584,16 +1584,16 @@ iz menija Orodja -> Upravljalnik vstavkov Smer odmika ni določena. S premikom kazalke na eno stran predmeta najprej nakažite smer - - + + True Je - - + + False Ni @@ -2132,7 +2132,7 @@ in spremeni njihov videz v slog pomožnih črt. Move to group... - Move to group... + Premakni v skupino ... @@ -2274,14 +2274,14 @@ ali obročno, prav tako pa je mogoče spreminjati njene lastnosti. Bézier curve - Bézier curve + Bezierova krivulja Creates an N-degree Bézier curve. The more points you pick, the higher the degree. CTRL to snap, SHIFT to constrain. - Creates an N-degree Bézier curve. The more points you pick, the higher the degree. -CTRL to snap, SHIFT to constrain. + Ustvari n-stopenjsko bezierjevo krivuljo. Več kot boste izbrali točk, višja bo stopnja. +CTRL za pripenjanje, PREMAKNI za omejitev. @@ -2289,12 +2289,12 @@ CTRL to snap, SHIFT to constrain. Bézier tools - Bézier tools + Bezierova orodja Create various types of Bézier curves. - Create various types of Bézier curves. + Ustvari različne vrste bezierovih krivulj. @@ -2350,16 +2350,16 @@ Dobljeni klon je mogoče prevelikostiti v vseh treh smereh. Cubic Bézier curve - Cubic Bézier curve + Kubična bezierova krivulja Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. - Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. -After the curve is created you can go back to edit each control point and set the properties of each knot. -CTRL to snap, SHIFT to constrain. + Ustvari bezierovo krivuljo iz dvostopenjskih (kvadratnih) in tristopenjskih (kubičnih) odsekov. S klikom in vlečenjem določite posamezni odsek. +Ko je krivulja že ustvarjena, lahko naknadno urejate vsako krmilno točko in nastavite lastnosti vsakemu vozlu. +CTRL za pripenjanje, PREMAKNI za omejitev. @@ -4282,13 +4282,13 @@ stalno širino"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr. - + mm mm @@ -4607,9 +4607,9 @@ iz Upravljalnika dodatkov. Dovoli FreeCADu samodejni prenos in posodobitev knjižnic DXF + - Import options Možnosti uvoza @@ -4978,12 +4978,12 @@ To lahko spodleti pri predlogah novejših od DXF R12. <html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if &quot;Show grid border&quot; option is enabled.</p></body></html> - <html><head/><body><p>If checked, the outline of a human figure is displayed at the bottom left corner of the grid. This option is only effective if the BIM workbench is installed and if &quot;Show grid border&quot; option is enabled.</p></body></html> + <html><head/><body><p>Če je označeno, bo v levem spodnjem kotu mreže prikazana človeška postava. Ta možnost je mogoča le, če je nameščeno BIM delovno okolje in omogočena možnost &quot;Prikaži mejo mreže&quot;.</p></body></html> Show human figure - Show human figure + Prikaži človeško postavo @@ -5088,12 +5088,12 @@ To lahko spodleti pri predlogah novejših od DXF R12. Conversion method: - Conversion method: + Način pretvorbe: This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. - This is the method FreeCAD will use to convert DWG files to DXF. If "Automatic" is chosen, FreeCAD will try to find one of the following converters in the same order as they are shown here. If FreeCAD is unable to find any, you might need to choose a specific converter and indicate its path here under. Choose the "dwg2dxf" utility if using LibreDWG, "ODAFileConverter" if using the ODA file converter, or the "dwg2dwg" utility if using the pro version of QCAD. + To način, s kakršnim FreeCAD pretvori datoteke dwg v dxf. Če je izbrano "Samodejno", bo FreeCAD skušal poiskati enekga izmed sledečih pretvornikov v enakem vrstnem redu, kot so tukaj prikazani. Če FreeCAD ne more najti nobenega, boste morali izbrati določen pretvornik in določiti njegovo pot. Če uporabljate LibreDWG, izberite "dwg2dxf", "ODAFileConverter", če uporabljate pretvornik datotek ODA ali "dwg2dwg" orodje, če uporabljate profesionalno različico QCADa. @@ -5103,27 +5103,27 @@ To lahko spodleti pri predlogah novejših od DXF R12. LibreDWG - LibreDWG + LibreDWG ODA Converter - ODA Converter + Pretvornik ODA QCAD pro - QCAD pro + QCAD pro Path to file converter - Path to file converter + Pot do pretvornika datotek The path to your DWG file converter executable - The path to your DWG file converter executable + Pot do izvedljive datoteke pretvornika datotek DWG @@ -5442,7 +5442,7 @@ To lahko spodleti pri predlogah novejših od DXF R12. Bézier tools - Bézier tools + Bezierova orodja @@ -5504,11 +5504,11 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. + - Copy Kopiraj @@ -6183,41 +6183,41 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi ustroja ni mogoče naložiti - - - + + + + - - - - + + + No active document. Aborting. Ni dejavnega dokumenta. Prekinjanje. - - + - - + + + Wrong input: object not in document. Napačen vnos: predmeta ni v dokumentu. @@ -6640,6 +6640,7 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi + @@ -6652,15 +6653,14 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi - Wrong input: must be a vector. Napačen vnos: biti mora vektor. - + Wrong input: must be a placement, a vector, or a rotation. Napačen vnos: biti mora postavitev, vektor ali zasukanost. @@ -6692,10 +6692,10 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Napačen vnos: vrsta oznake (label_type) mora biti nekaj izmed naslednjega: - - + + Wrong input: must be a list of strings or a single string. Napačen vnos: biti mora seznam nizov ali en sam niz. @@ -6706,12 +6706,12 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Napačen vnos: biti mora niz, "Vodoravno", "Navpično" ali "Po meri". + - - + Wrong input: must be a number. Napačen vnos: biti mora številka. @@ -7251,10 +7251,10 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Lok iz 3 točk - - + + Pick first point Izberite prvo točko @@ -7347,8 +7347,8 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Izberite predmet(e) za prirezovanje/podaljšanje - + Pick distance Izberite razdaljo @@ -7476,8 +7476,8 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Raztegni - + Please select exactly two objects, the base object and the path object, before calling this command. Preden prikličete ta ukaz, izberite natanko dva predmeta: izhodiščni predmet in točkovni predmet. @@ -7490,7 +7490,7 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Bézier curve has been closed - Bézier curve has been closed + Bezierova krivulja je bila sklenjena @@ -7568,8 +7568,8 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Ustvari pravokotnik - + Pick opposite point Izberite nasprotno točko @@ -7823,8 +7823,8 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Premakni - + Some subelements could not be moved. Nekaterih podprvin ni bilo mogoče premakniti. @@ -7995,16 +7995,16 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Presekaj črto - - + + Task panel: Podokno nalog: - - + + At least one element must be selected. Izbrati morate vsaj eno prvino. @@ -8014,19 +8014,19 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Biti mora najmanj 1 prvina. - - + + Selection is not suitable for array. Izbor ni primeren za razpostavljanje. - - - - + + + + Object: Predmet: @@ -8046,16 +8046,16 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Ponastavitev koraka po Z-ju: - - + + Fuse: Združi: - - + + Create Link array: Ustvari vezano razpostavitev: @@ -8090,9 +8090,9 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Korak Z: - - + + Aborted: Prekinjeno: @@ -8122,8 +8122,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Dotikalna razdalja je negativna. Za nadaljevanje je bila pretvorjena v pozitivno. - + Center reset: Ponastavitev središča: @@ -8148,8 +8148,8 @@ Končni kót bo seštevek izhodiščnega in tega kóta. Somernostna določilka: - + Center of rotation: Središče sukanja: diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 7bf2531863..a9e7c9345b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -39,16 +39,16 @@ Längden på denna linje - + Radius to use to fillet the corners Radie som ska användas för att avrunda hörnen - + Size of the chamfer to give to the corners Storleken på hörnens avfasning @@ -63,12 +63,12 @@ Antalet indelningar av varje kant - - - - + + + + The area of this object Arean för detta objekt @@ -269,10 +269,10 @@ eller från underelementet 'VertexN', 'EdgeN', respektive 'FaceN', om det anges. Cirkelns radie - - + + Create a face Skapa en yta @@ -324,8 +324,8 @@ eller från underelementet 'VertexN', 'EdgeN', respektive 'FaceN', om det anges. - + Show the individual array elements (only for Link arrays) Visa de enskilda matriselementen (endast för Länkmatriser) @@ -989,33 +989,33 @@ Denna egenskap är skrivskyddad, eftersom antalet beror på de punkter som ryms Ytterligare placering, förflyttning och rotation, som kommer att tillämpas på varje kopia - + The size of the text Textstorleken - + The font of the text Textens teckensnitt + - The vertical alignment of the text Textens vertikala justering - + Text color Textfärg - + Line spacing (relative to font size) Radavstånd (förhållande till teckenstorlek) @@ -1585,16 +1585,16 @@ menyverktyg -> Insticksmodulshanterare Förskjutningsriktning är inte definierad. Flytta musen på ena sidan av objektet först för att indikera en riktning - - + + True Sant - - + + False Falskt @@ -4273,13 +4273,13 @@ som "Arial:Bold" - + mm mm @@ -4597,9 +4597,9 @@ från Addon Manager. Tillåt FreeCAD att automatiskt hämta och uppdatera DXF-biblioteken + - Import options Importeringsalternativ @@ -5492,11 +5492,11 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. + - Copy Kopiera @@ -6171,41 +6171,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. Inget aktivt dokument. Avbryter. - - + - - + + + Wrong input: object not in document. Fel inmatning: objekt inte i dokument. @@ -6628,6 +6628,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6640,15 +6641,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Fel inmatning: måste vara en vektor. - + Wrong input: must be a placement, a vector, or a rotation. Fel inmatning: måste vara en placering, en vektor, eller en rotation. @@ -6680,10 +6680,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Fel inmatning: måste vara en lista över strängar eller en enda sträng. @@ -6694,12 +6694,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledFel inmatning: måste vara en sträng, 'Horisontell', 'Vertikal' eller 'Anpassad'. + - - + Wrong input: must be a number. Fel inmatning: måste vara ett tal. @@ -7239,10 +7239,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCirkelbåge med 3 punkter - - + + Pick first point Välj första punkt @@ -7335,8 +7335,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMarkera objekt att trimma/förlänga - + Pick distance Välj avstånd @@ -7464,8 +7464,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledTöj ut - + Please select exactly two objects, the base object and the path object, before calling this command. Välj exakt två objekt, basobjektet och banobjektet, innan du anropar detta kommando. @@ -7556,8 +7556,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSkapa rektangel - + Pick opposite point Välj motstående punkt @@ -7811,8 +7811,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledFlytta - + Some subelements could not be moved. Några underelement kunde inte flyttas. @@ -7983,16 +7983,16 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Dela linje - - + + Task panel: Uppgiftspanel: - - + + At least one element must be selected. Minst ett element måste väljas. @@ -8002,19 +8002,19 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Antal element måste vara minst 1. - - + + Selection is not suitable for array. Urval är inte lämpligt för matris. - - - - + + + + Object: Objekt: @@ -8034,16 +8034,16 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Återställning av intervall Z: - - + + Fuse: Kombinera: - - + + Create Link array: Skapa länkmatris: @@ -8078,9 +8078,9 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Z Intervall: - - + + Aborted: Avbruten: @@ -8110,8 +8110,8 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Radiellt avstånd är negativt. Det görs positivt att fortsätta. - + Center reset: Återställ centrum: @@ -8136,8 +8136,8 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd. Symmetriparameter: - + Center of rotation: Rotationscentrum: diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index 800f913264..20238f6bd3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -39,16 +39,16 @@ Bu çizginin uzunluğu - + Radius to use to fillet the corners Köşeleri yuvarlamak için kullanılacak yarıçap - + Size of the chamfer to give to the corners Köşelere verilecek pahın ölçüsü @@ -63,12 +63,12 @@ Her kenarın alt bölümlerinin sayısı - - - - + + + + The area of this object Bu objenin alanı @@ -270,10 +270,10 @@ veya belirtilmişse, sırasıyla 'VertexN', 'EdgeN' veya 'FaceN' alt öğesinden Çemberin yarıçapı - - + + Create a face Bir yüzey oluştur @@ -325,8 +325,8 @@ veya belirtilmişse, sırasıyla 'VertexN', 'EdgeN' veya 'FaceN' alt öğesinden - + Show the individual array elements (only for Link arrays) Bireysel dizi öğelerini gösterin (yalnızca bağlantı dizileri için) @@ -991,33 +991,33 @@ Bu özellik salt okunurdur, çünkü sayı 'Nokta Nesnesi'nde bulunan noktalara Her kopyaya uygulanacak ek yerleştirme, kaydırma ve döndürme - + The size of the text Metnin boyutu - + The font of the text Metnin yazı tipi + - The vertical alignment of the text Metnin dikey hizalaması - + Text color Metin rengi - + Line spacing (relative to font size) Satır boşluğu (yazı tipi boyutuna göre) @@ -1589,16 +1589,16 @@ menüden Araçlar -> Eklenti Yöneticisi Ofset yönü tanımlanmadı. Bir yönü belirtmek için lütfen fareyi nesnenin her iki yanında hareket ettirin - - + + True Doğru - - + + False Yanlış @@ -4286,13 +4286,13 @@ Bu değer, "Arial", varsayılan stiller "sans", "serif" veya "mono", veya aile a - + mm mm @@ -4610,9 +4610,9 @@ Bu işlemi Eklenti Yöneticisi' nden "dxf_library" tezgahını yükleyerek elle FreeCAD'in DXF kitaplıklarını otomatik olarak indirmesine ve güncellemesine izin ver + - Import options İçe aktarım seçenekleri @@ -5506,11 +5506,11 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın + - Copy Kopyala @@ -6185,41 +6185,41 @@ Not available if Draft preference option 'Use Part Primitives' is enableddoku yüklenemiyor - - - + + + + - - - - + + + No active document. Aborting. Etkin belge yok. Durduruluyor. - - + - - + + + Wrong input: object not in document. Yanlış girdi: nesne belgede yok. @@ -6642,6 +6642,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6654,15 +6655,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Yanlış giriş: bir vektör olmalı. - + Wrong input: must be a placement, a vector, or a rotation. Yanlış girdi: bir yerleşim, vektör veya dönüş olmalıdır. @@ -6694,10 +6694,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Yanlış girdi: bir karakter dizi listesi veya tek bir karakter dizisi olmalı. @@ -6708,12 +6708,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledYanlış giriş: bir karakter dizisi, 'Yatay', 'Dikey' veya 'Özel' olmalıdır. + - - + Wrong input: must be a number. Yanlış giriş: bir sayı olmalı. @@ -7253,10 +7253,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabled3 Noktalı Yay - - + + Pick first point İlk noktayı seçin @@ -7349,8 +7349,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledKırpılacak veya uzatılacak nesneleri seçin - + Pick distance Mesafe seçin @@ -7478,8 +7478,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUzat - + Please select exactly two objects, the base object and the path object, before calling this command. Lütfen bu komutu çağırmadan önce tam olarak iki nesne, temel nesne ve yol nesnesi seçin. @@ -7570,8 +7570,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledDikdörtgen oluştur - + Pick opposite point Karşıt noktayı seçin @@ -7825,8 +7825,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledTaşı - + Some subelements could not be moved. Bazı alt öğeler taşınamadı. @@ -7997,16 +7997,16 @@ Son açı, taban açısı artı bu miktar olacaktır. Çizgiyi böl - - + + Task panel: Görev paneli: - - + + At least one element must be selected. En az bir öğe seçilmelidir. @@ -8016,19 +8016,19 @@ Son açı, taban açısı artı bu miktar olacaktır. Eleman sayısı en az 1 olmalıdır. - - + + Selection is not suitable for array. Dizilim için seçim uygun değil. - - - - + + + + Object: Nesne: @@ -8048,16 +8048,16 @@ Son açı, taban açısı artı bu miktar olacaktır. Z aralığını sıfırla: - - + + Fuse: Birleştir: - - + + Create Link array: Bağlantı dizisi oluşturun: @@ -8092,9 +8092,9 @@ Son açı, taban açısı artı bu miktar olacaktır. Z Aralığı: - - + + Aborted: İptal edildi: @@ -8124,8 +8124,8 @@ Son açı, taban açısı artı bu miktar olacaktır. Teğet uzaklık negatiftir. Devam etmek için pozitif yapılır. - + Center reset: Merkez sıfırlama: @@ -8150,8 +8150,8 @@ Son açı, taban açısı artı bu miktar olacaktır. Simetri parametresi: - + Center of rotation: Döndürme merkezi: diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index 007f0e0d4d..2e7149fa67 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -39,16 +39,16 @@ Довжина цієї лінії - + Radius to use to fillet the corners Радіус для заокруглення кутів - + Size of the chamfer to give to the corners Розмір фаски для кутів @@ -63,12 +63,12 @@ Кількість ділень кожного ребра - - - - + + + + The area of this object Форма цього об’єкта @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Радіус кола - - + + Create a face Створіть грань @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Показати окремі елементи масиву (лише для поєднаних масивів) @@ -991,33 +991,33 @@ This property is read-only, as the number depends on the points contained within Додаткове розміщення, зміщення та обертання, які застосовуватимуться до кожної копії - + The size of the text Розмір тексту - + The font of the text Шрифт тексту + - The vertical alignment of the text Вертикальне вирівнювання тексту - + Text color Колір тексту - + Line spacing (relative to font size) Міжрядковий інтервал (по відношенню до розміру шрифту) @@ -1589,16 +1589,16 @@ from menu Tools -> Addon Manager Напрямок зміщення не визначено. Будь ласка, перемістіть курсор миші на обидві сторони обʼєкта спочатку для вказівки напрямку - - + + True Так - - + + False Ні @@ -4287,13 +4287,13 @@ such as "Arial:Bold" - + mm мм @@ -4611,9 +4611,9 @@ from the Addon Manager. Дозволити FreeCAD автоматично завантажувати та оновлювати DXF-бібліотеки + - Import options Налаштування імпорту @@ -5508,11 +5508,11 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер + - Copy Копіювати @@ -6187,41 +6187,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledнеможливо завантажити текстуру - - - + + + + - - - - + + + No active document. Aborting. Немає активного документа. Відмінити. - - + - - + + + Wrong input: object not in document. Неправильне введення: обʼєкт не в документі. @@ -6644,6 +6644,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6656,15 +6657,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Неправильне введення: має бути вектор. - + Wrong input: must be a placement, a vector, or a rotation. Невірне введення: має бути розміщення, вектор або обертання. @@ -6696,10 +6696,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledНеправильне введення: тип етикетки повинен бути одним з наступних: - - + + Wrong input: must be a list of strings or a single string. Неправильне введення: повинен бути списком рядків або одного рядка. @@ -6710,12 +6710,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledНеправильний вхідний параметр: має бути рядком, «Горизонталь», «Вертикальний» або «Замовлення». + - - + Wrong input: must be a number. Неправильне введення: має бути число. @@ -7255,10 +7255,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledДуга за 3 точками - - + + Pick first point Вкажіть першу точку @@ -7351,8 +7351,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledОберіть обʼєкти, щоб обрізати або розширити - + Pick distance Вибрати відстань @@ -7481,8 +7481,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledРозтягнути - + Please select exactly two objects, the base object and the path object, before calling this command. Будь ласка, виберіть саме два об’єкти, основний обʼєкт і шлях до запуску цієї команди. @@ -7573,8 +7573,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledСтворити прямокутник - + Pick opposite point Вкажіть протилежну точку @@ -7828,8 +7828,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledПереміщення - + Some subelements could not be moved. Деякі піделементи не можуть рухатися. @@ -8000,16 +8000,16 @@ The final angle will be the base angle plus this amount. Розділити лінію - - + + Task panel: Панель завдань: - - + + At least one element must be selected. Потрібно вибрати хоча б один елемент. @@ -8019,19 +8019,19 @@ The final angle will be the base angle plus this amount. Кількість елементів має бути принаймні 1. - - + + Selection is not suitable for array. Виділення не підходить для масиву. - - - - + + + + Object: Обʼєкт: @@ -8051,16 +8051,16 @@ The final angle will be the base angle plus this amount. Інтервал X скинуто: - - + + Fuse: Злиття: - - + + Create Link array: Створити масив посилання: @@ -8095,9 +8095,9 @@ The final angle will be the base angle plus this amount. Інтервал Z: - - + + Aborted: Перервано: @@ -8127,8 +8127,8 @@ The final angle will be the base angle plus this amount. Тангенціальна відстань відʼємна. Це робиться позитивним для продовження. - + Center reset: Скинути центр: @@ -8153,8 +8153,8 @@ The final angle will be the base angle plus this amount. Параметр симетрії: - + Center of rotation: Центр обертання: diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index f020263263..1b2d3782fb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -39,16 +39,16 @@ La longitud d'esta línia - + Radius to use to fillet the corners Radi a utilitzar per a arredonir els cantons - + Size of the chamfer to give to the corners Mida del xamfrà que cal donar als cantons @@ -63,12 +63,12 @@ El nombre de subdivisions de cada aresta - - - - + + + + The area of this object L'àrea d'este objecte @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Crea una cara @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Mostra els elements individuals de la matriu (només per a matrius enllaçades) @@ -991,33 +991,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text La mida del text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1588,16 +1588,16 @@ mitjançant l'opció Eines ->Gestor de complements Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Cert - - + + False Fals @@ -4271,13 +4271,13 @@ such as "Arial:Bold" - + mm mm @@ -4593,9 +4593,9 @@ del gestor de complements. Permeten que FreeCAD descarregue i actualitze automàticament les biblioteques DXF + - Import options Opcions d'importació @@ -5479,11 +5479,11 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí. + - Copy Copia @@ -6158,41 +6158,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6615,6 +6615,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6627,15 +6628,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6667,10 +6667,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6681,12 +6681,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7226,10 +7226,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7322,8 +7322,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7451,8 +7451,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7543,8 +7543,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7798,8 +7798,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMou - + Some subelements could not be moved. Some subelements could not be moved. @@ -7970,16 +7970,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -7989,19 +7989,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8021,16 +8021,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8065,9 +8065,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8097,8 +8097,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8123,8 +8123,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index edf8ab3dac..42cf07451d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -39,16 +39,16 @@ The length of this line - + Radius to use to fillet the corners Radius to use to fillet the corners - + Size of the chamfer to give to the corners Size of the chamfer to give to the corners @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object The area of this object @@ -270,10 +270,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp Radius of the circle - - + + Create a face Create a face @@ -325,8 +325,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) Show the individual array elements (only for Link arrays) @@ -992,33 +992,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1590,16 +1590,16 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True Đúng - - + + False Sai @@ -4288,13 +4288,13 @@ Nó có thể là tên phông chữ như "Arial", một kiểu mặc định nh - + mm mm @@ -4613,9 +4613,9 @@ from the Addon Manager. Cho phép FreeCAD để tự động tải xuống và cập nhật các thư viện DXF + - Import options Tùy chọn nhập khẩu @@ -5510,11 +5510,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy Sao chép @@ -6189,41 +6189,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6646,6 +6646,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6658,15 +6659,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6698,10 +6698,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6712,12 +6712,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7257,10 +7257,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7353,8 +7353,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7482,8 +7482,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7574,8 +7574,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7829,8 +7829,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledDi chuyển - + Some subelements could not be moved. Some subelements could not be moved. @@ -8001,16 +8001,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8020,19 +8020,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8052,16 +8052,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8096,9 +8096,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8128,8 +8128,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8154,8 +8154,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index b50f5f0354..a54bc1b2f7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 0a32675aba..a97d65f535 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -26,29 +26,29 @@ The start point of this line - The start point of this line + 这条线的起点 The end point of this line - The end point of this line + 这条线的终点 The length of this line - The length of this line + 这条线的长度 - + Radius to use to fillet the corners 圆角半径 - + Size of the chamfer to give to the corners 倒角的尺寸 @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object 此对象的面积 @@ -267,10 +267,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp 圆的半径 - - + + Create a face 创建一个面 @@ -322,8 +322,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) 显示单个数组元素（仅适用于链接数组） @@ -982,33 +982,33 @@ This property is read-only, as the number depends on the points contained within 附加位置、轮班和轮换，将适用于每个副本 - + The size of the text The size of the text - + The font of the text The font of the text + - The vertical alignment of the text The vertical alignment of the text - + Text color 文本颜色 - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1578,16 +1578,16 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True 是 - - + + False 否 @@ -4272,13 +4272,13 @@ such as "Arial:Bold" - + mm mm @@ -4597,9 +4597,9 @@ from the Addon Manager. 允许 FreeCAD 自动下载和更新 DXF 库 + - Import options 导入选项 @@ -5492,11 +5492,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy 复制 @@ -6171,41 +6171,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6628,6 +6628,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6640,15 +6641,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6680,10 +6680,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6694,12 +6694,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7239,10 +7239,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7335,8 +7335,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7464,8 +7464,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7556,8 +7556,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7811,8 +7811,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabled移动 - + Some subelements could not be moved. Some subelements could not be moved. @@ -7983,16 +7983,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: Task panel: - - + + At least one element must be selected. At least one element must be selected. @@ -8002,19 +8002,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8034,16 +8034,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: Create Link array: @@ -8078,9 +8078,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8110,8 +8110,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8136,8 +8136,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 0776b1f0f1..79dbaa9d4a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -39,16 +39,16 @@ 此線段的長度 - + Radius to use to fillet the corners 倒角半徑 - + Size of the chamfer to give to the corners 倒角尺寸 @@ -63,12 +63,12 @@ The number of subdivisions of each edge - - - - + + + + The area of this object 此物件的面積 @@ -264,10 +264,10 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp 圓的半徑 - - + + Create a face 建立一個面 @@ -319,8 +319,8 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp - + Show the individual array elements (only for Link arrays) 顯示單個陣列元素（僅適用於連結陣列） @@ -978,33 +978,33 @@ This property is read-only, as the number depends on the points contained within Additional placement, shift and rotation, that will be applied to each copy - + The size of the text 字體大小 - + The font of the text 字型 + - The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) @@ -1576,16 +1576,16 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - + + True 真(True) - - + + False 偽(False) @@ -4273,13 +4273,13 @@ such as "Arial:Bold" - + mm mm @@ -4597,9 +4597,9 @@ from the Addon Manager. 允許FreeCAD自動下載並更新DXF函式庫 + - Import options 匯入選項 @@ -5491,11 +5491,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer + - Copy 複製 @@ -6170,41 +6170,41 @@ Not available if Draft preference option 'Use Part Primitives' is enabledunable to load texture - - - + + + + - - - - + + + No active document. Aborting. No active document. Aborting. - - + - - + + + Wrong input: object not in document. Wrong input: object not in document. @@ -6627,6 +6627,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled + @@ -6639,15 +6640,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabled - Wrong input: must be a vector. Wrong input: must be a vector. - + Wrong input: must be a placement, a vector, or a rotation. Wrong input: must be a placement, a vector, or a rotation. @@ -6679,10 +6679,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: label_type must be one of the following: - - + + Wrong input: must be a list of strings or a single string. Wrong input: must be a list of strings or a single string. @@ -6693,12 +6693,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabledWrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + - - + Wrong input: must be a number. Wrong input: must be a number. @@ -7238,10 +7238,10 @@ Not available if Draft preference option 'Use Part Primitives' is enabledArc by 3 points - - + + Pick first point Pick first point @@ -7334,8 +7334,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSelect objects to trim or extend - + Pick distance Pick distance @@ -7463,8 +7463,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledStretch - + Please select exactly two objects, the base object and the path object, before calling this command. Please select exactly two objects, the base object and the path object, before calling this command. @@ -7555,8 +7555,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCreate Rectangle - + Pick opposite point Pick opposite point @@ -7810,8 +7810,8 @@ Not available if Draft preference option 'Use Part Primitives' is enabled移動 - + Some subelements could not be moved. Some subelements could not be moved. @@ -7982,16 +7982,16 @@ The final angle will be the base angle plus this amount. Split line - - + + Task panel: 工作面板： - - + + At least one element must be selected. At least one element must be selected. @@ -8001,19 +8001,19 @@ The final angle will be the base angle plus this amount. Number of elements must be at least 1. - - + + Selection is not suitable for array. Selection is not suitable for array. - - - - + + + + Object: Object: @@ -8033,16 +8033,16 @@ The final angle will be the base angle plus this amount. Interval Z reset: - - + + Fuse: Fuse: - - + + Create Link array: 建立連結陣列： @@ -8077,9 +8077,9 @@ The final angle will be the base angle plus this amount. Interval Z: - - + + Aborted: Aborted: @@ -8109,8 +8109,8 @@ The final angle will be the base angle plus this amount. Tangential distance is negative. It is made positive to proceed. - + Center reset: Center reset: @@ -8135,8 +8135,8 @@ The final angle will be the base angle plus this amount. Symmetry parameter: - + Center of rotation: Center of rotation: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm index f330ff81ef..844ec9024f 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index b3f3ff6427..4b7ce8f7d5 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecció incorrecta - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pla - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecció incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Longitud + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Paràmetre @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Edita la restricció + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grups - - + + Are you sure you want to continue? Segur que voleu continuar? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependències de l'objecte diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index 4ad07a7208..3d26faba76 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index f52afaf6ab..7300637bf6 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Neplatný výběr - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Rovina - + Sphere Koule @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Tloušťka [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Neplatný výběr - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Délka + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parametr @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Upravit vazbu + + + + + + - - - - - - A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh + + + + + + - - - - - - Do you want to close this dialog? Chcete zavřít tento dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Skupiny - - + + Are you sure you want to continue? Opravdu si přejete pokračovat? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Závislosti objektu diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index 5d934f0061..8e6bf49b35 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index d5543a7ac7..0821772cb3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Änderungen auf Pipeline anwenden - + Apply changes to parameters directly and not on recompute only... Parameter-Änderungen direkt anwenden und nicht nur bei Neuberechnung... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region Ausschnitt-Filter - + Define/create a clip filter which uses functions to define the cliped region Definiere/Erstelle einen Ausschnitt-Filter, der Funktionen verwendet um die ausgeschnitte Region zu definieren - + Wrong selection Falsche Auswahl - + Select a pipeline, please. Bitte eine Pipeline auswählen. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Daten an Punkt @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Funktion Schnitt-Filter - + Cut the data along an implicit function Schneiden Sie die Daten entlang einer impliziten Funktion @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Linie Ausschnitt-Filter - + Define/create a clip filter which clips a field along a line Definieren/Erstellen eines Clip-Filters, der ein Feld entlang einer Linie ausschneidet @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Daten zu Punkt Ausschnits-Filter - + Define/create a clip filter which clips a field data at point Definiere/Erstelle einen Ausschnitt-Filter, der einen Datenpunkt aus einem Feld ausschneidet @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filterfunktionen - + Functions for use in postprocessing filter... Funktionen zur Verwendung in Nachbearbeitungs-Filter... - + Plane Ebene - + Sphere Kugel @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Dicke [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membran + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Summe + + + Fem Fem - + Stress linearization plot Linearisierte Spannungsdarstellung - + Define/create stress linearization plots Linearisierte Spannungsdarstellung definieren/erstellen - - + + Wrong selection Falsche Auswahl - - + + Select a Clip filter which clips a STRESS field along a line, please. Bitte einen einen Ausschnitt-Filter auswählen, der ein Spannungs-Feld entlang einer Linie ausschneidet. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Nachbearbeitungs-Pipeline aus Ergebnis - + Creates a post processing pipeline from a result object Erstellt eine Nachbearbeitungs-Pipeline aus einem Ergebnisobjekt - + Wrong selection type Falscher Auswahl-Typ - + Select a result object, please. Bitte ein Ergebnisobjekt auswählen. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Skalar Ausschnitt-Filter - + Define/create a clip filter which clips a field with a scalar value Definiere/Erstelle einen Ausschnitt-Filter, der ein Feld mit einem skalaren Wert ausschneidet @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Verformungsfilter - + Warp the geometry along a vector field by a certain factor Geometrie um einen bestimmten Faktor entlang eines Vektorfeldes verformen @@ -659,12 +695,12 @@ Filter erstellen - + Create function Funktion erstellen - + Create pipeline from result Pipeline aus Ergebnis erzeugen @@ -884,7 +920,7 @@ Please select a result type first. Histogram of {} - Histogram of {} + Histogramm von {} @@ -910,7 +946,7 @@ Please select a result type first. No result object - No result object + Kein Ergebnisobjekt @@ -1377,12 +1413,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Erstelle eine Ebenenfunktion, definiert durch Ursprung und Normale - + Create a sphere function, defined by its center and radius Erstelle eine Kugelfunktion, definiert durch Mittelpunkt und Radius @@ -3036,7 +3072,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Funktionsschnitt, implizite Funktion wählen @@ -3048,11 +3084,17 @@ that "MAXKOI" needs to be increased. Data along a line options Optionen für Daten entlang einer Linie + + + Length + X-Axis plot label + Länge + FemGui::TaskPostDataAtPoint - + Data at point options Daten an Punkt Optionen @@ -3076,7 +3118,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Skalar-Ausschnitt-Optionen @@ -3084,7 +3126,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Verformungsoptionen @@ -3526,7 +3568,10 @@ that "MAXKOI" needs to be increased. Verbindungsparameter + + + @@ -3535,9 +3580,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3552,11 +3594,11 @@ that "MAXKOI" needs to be increased. Zentrifugal-Parameter + + - - Parameter Parameter @@ -3586,9 +3628,9 @@ that "MAXKOI" needs to be increased. Abschnitt Druckparameter - - + + Constraint Properties Randbedingungs-Eigenschaften @@ -3603,14 +3645,14 @@ that "MAXKOI" needs to be increased. Elektrisches Potenzial in V - - - + + - - + + + unspecified unbestimmt @@ -3713,30 +3755,30 @@ that "MAXKOI" needs to be increased. Drehung: - + Velocity x: Geschwindigkeit x: - + Velocity y: Geschwindigkeit y: - + Velocity z: Geschwindigkeit z: - - - + + + m/s m/s @@ -3821,7 +3863,7 @@ that "MAXKOI" needs to be increased. Selection mode - Selection mode + Auswahlmodus @@ -3929,26 +3971,26 @@ that "MAXKOI" needs to be increased. Randbedingung bearbeiten + + + + + + - - - - - - A dialog is already open in the task panel Im Aufgabenbereich ist bereits ein Dialog geöffnet + + + + + + - - - - - - Do you want to close this dialog? Möchten Sie dieses Dialogfeld schließen? @@ -4072,7 +4114,7 @@ that "MAXKOI" needs to be increased. Polyhedrons - Polyhedrons + Polyeder @@ -4080,10 +4122,10 @@ that "MAXKOI" needs to be increased. Gruppen - - + + Are you sure you want to continue? Bist du sicher, dass du fortfahren möchtest? @@ -4217,7 +4259,7 @@ and colors the result mesh accordingly Calculate - Calculate + Berechnen @@ -4229,7 +4271,7 @@ For possible variables, see the description box below. P1 - P3 # Max - Min Principal Stress - P1 - P3 # Max - Min Principal Stress + P1 - P3 # Max. - Min. Hauptspannung @@ -4279,7 +4321,7 @@ For possible variables, see the description box below. max shear stress: MS - max shear stress: MS + max. Scherspannung: MS @@ -4289,7 +4331,7 @@ For possible variables, see the description box below. max principal stress: P1 - max principal stress: P1 + max. Normalspannung: P1 @@ -4299,7 +4341,7 @@ For possible variables, see the description box below. med principal stress: P2 - med principal stress: P2 + mittlere Normalspannung: P2 @@ -4309,7 +4351,7 @@ For possible variables, see the description box below. min principal stress: P3 - min principal stress: P3 + min. Normalspannung: P3 @@ -4436,10 +4478,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Objektabhängigkeiten diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm index fec6a51da7..9da49af31b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_el.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 7df512b614..96765c7f9c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Λάθος επιλογή - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Επίπεδο - + Sphere Σφαίρα @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Σύνολο + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Λάθος επιλογή - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Μήκος + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Παράμετρος @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Επεξεργασία περιορισμού + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Ομάδες - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Εξαρτήσεις αντικειμένου diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm index be2ac6e4ac..4be5288774 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index 7772f2678e..77d00cc27b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem FEM - + Apply changes to pipeline Aplicar cambios a tubería - + Apply changes to parameters directly and not on recompute only... Aplicar cambios a los parámetros directamente y no sólo en el recálculo... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem FEM - + Region clip filter Filtro de región de recorte - + Define/create a clip filter which uses functions to define the cliped region Definir/crear un filtro de clip que utiliza funciones para definir la región recortada - + Wrong selection Selección Incorrecta - + Select a pipeline, please. Seleccionar una tubería, por favor. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Datos en Punto @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem FEM - + Function cut filter Filtro de corte de función - + Cut the data along an implicit function Cortar los datos a lo largo de una función implícita @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM - + Line clip filter Filtro de recorte de línea - + Define/create a clip filter which clips a field along a line Definir/crear un filtro de recorte que recorta un campo a lo largo de una línea @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM - + Data at point clip filter Filtro de datos en el clip de punto - + Define/create a clip filter which clips a field data at point Definir/crear un filtro de clip que recorte un campo de datos en el punto @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem FEM - + Filter functions Funciones de filtro - + Functions for use in postprocessing filter... Funciones para uso en el filtro de postprocesamiento... - + Plane Plano - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Espesor [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Esfuerzo [MPa] + + + + Linearized Stresses + Plot title + Esfuerzos linearizados + + + + Membrane + Plot legend item label + Membrana + + + + Membrane and Bending + Plot legend item label + Membrana y flexión + + + + Total + Plot legend item label + Total + + + Fem FEM - + Stress linearization plot Gráfica de linearización de esfuerzo - + Define/create stress linearization plots Definir/crear gráficas de linearización de esfuerzo - - + + Wrong selection Selección Incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Seleccione un filtro de clip que recorra un campo de ESFUERZO a lo largo de una línea, por favor. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem FEM - + Post pipeline from result Publicar tubería del resultado - + Creates a post processing pipeline from a result object Crea una tubería de post-procesamiento a partir de un objeto resultado - + Wrong selection type Tipo de selección incorrecta - + Select a result object, please. Seleccione un objeto de resultado, por favor. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem FEM - + Scalar clip filter Filtro de clip escalar - + Define/create a clip filter which clips a field with a scalar value Definir/crear un filtro de clip que recorte un campo con un valor escalar @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM - + Warp filter Filtro de deformación - + Warp the geometry along a vector field by a certain factor Deformar la geometría a lo largo de un campo vectorial por un factor determinado @@ -659,12 +695,12 @@ Crear filtro - + Create function Crear función - + Create pipeline from result Crear tubería desde resultado @@ -894,17 +930,17 @@ Por favor, primero seleccione un tipo de resultado. FEM: there are no nodes in result mesh, there will be nothing to show. - FEM: there are no nodes in result mesh, there will be nothing to show. + FEM: no hay nodos en la malla resultante, no habrá nada que mostrar. Empty result mesh - Empty result mesh + Malla resultante vacía FEM: Graphical bending stress output for beam or shell FEM Meshes not yet supported. - FEM: Graphical bending stress output for beam or shell FEM Meshes not yet supported. + FEM: La salida gráfica para flexión para mallas FEM de vigas o placas aún no está soportada. @@ -1377,12 +1413,12 @@ Por favor, primero seleccione un tipo de resultado. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crear un plano de función, definida por su origen y normal - + Create a sphere function, defined by its center and radius Crear una función de esfera, definida por su centro y radio @@ -3042,7 +3078,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostCut - + Function cut, choose implicit function Función cortada, elegir función implícita @@ -3054,11 +3090,17 @@ de que "MAXKOI" necesita ser aumentado. Data along a line options Opciones de datos a lo largo de una línea + + + Length + X-Axis plot label + Longitud + FemGui::TaskPostDataAtPoint - + Data at point options Opciones de datos de punto @@ -3082,7 +3124,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostScalarClip - + Scalar clip options Opciones de clip escalar @@ -3090,7 +3132,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostWarpVector - + Warp options Opciones de deformación @@ -3532,7 +3574,10 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de enlace + + + @@ -3541,9 +3586,6 @@ de que "MAXKOI" necesita ser aumentado. - - - 0 mm 0 mm @@ -3558,11 +3600,11 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de Centrífuga + + - - Parameter Parámetro @@ -3592,9 +3634,9 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de Sección de Impresión - - + + Constraint Properties Propiedades de Restricción @@ -3609,14 +3651,14 @@ de que "MAXKOI" necesita ser aumentado. Potencial eléctrico en V - - - + + - - + + + unspecified no especificado @@ -3719,30 +3761,30 @@ de que "MAXKOI" necesita ser aumentado. Rotación: - + Velocity x: Velocidad x: - + Velocity y: Velocidad y: - + Velocity z: Velocidad z: - - - + + + m/s m/s @@ -3935,26 +3977,26 @@ de que "MAXKOI" necesita ser aumentado. Editar restricción + + + + + + - - - - - - A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas + + + + + + - - - - - - Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -4086,10 +4128,10 @@ de que "MAXKOI" necesita ser aumentado. Grupos - - + + Are you sure you want to continue? ¿Estás seguro/a de que quieres continuar? @@ -4229,8 +4271,8 @@ y colorea en consecuencia la malla resultante Enter here an equation to be calculated. For possible variables, see the description box below. - Enter here an equation to be calculated. -For possible variables, see the description box below. + Introduzca aquí una ecuación para calcular. +Para posibles variables, vea el cuadro de descripción a continuación. @@ -4300,22 +4342,22 @@ For possible variables, see the description box below. med princ. stress vector: s2x, s2y, s2z - med princ. stress vector: s2x, s2y, s2z + vector de esfuerzo principal med: s2x, s2y, s2z med principal stress: P2 - med principal stress: P2 + esfuerzo principal med: P2 min princ. stress vector: s1x, s1y, s1z - min princ. stress vector: s1x, s1y, s1z + vector de esfuerzo principal mín: s1x, s1y, s1z min principal stress: P3 - min principal stress: P3 + esfuerzo principal mínimo: P3 @@ -4442,10 +4484,10 @@ following referencing objects might be lost: siguiente objeto de referencia podría perderse: - - + + Object dependencies Dependencias del objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index c0d8ae22cd..54a052a352 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 1e59a43c24..bcb9d704d9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem FEM - + Apply changes to pipeline Aplicar cambios a tubería - + Apply changes to parameters directly and not on recompute only... Aplicar cambios a los parámetros directamente y no sólo en el recálculo... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem FEM - + Region clip filter Filtro de región de recorte - + Define/create a clip filter which uses functions to define the cliped region Definir/crear un filtro de clip que utiliza funciones para definir la región recortada - + Wrong selection Selección incorrecta - + Select a pipeline, please. Seleccionar una tubería, por favor. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Datos en Punto @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem FEM - + Function cut filter Filtro de corte de función - + Cut the data along an implicit function Cortar los datos a lo largo de una función implícita @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM - + Line clip filter Filtro de recorte de línea - + Define/create a clip filter which clips a field along a line Definir/crear un filtro de recorte que recorta un campo a lo largo de una línea @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM - + Data at point clip filter Filtro de datos en el clip de punto - + Define/create a clip filter which clips a field data at point Definir/crear un filtro de clip que recorte un campo de datos en el punto @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem FEM - + Filter functions Funciones de filtro - + Functions for use in postprocessing filter... Funciones para uso en el filtro de postprocesamiento... - + Plane Plano - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Espesor [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Esfuerzo [MPa] + + + + Linearized Stresses + Plot title + Esfuerzos linearizados + + + + Membrane + Plot legend item label + Membrana + + + + Membrane and Bending + Plot legend item label + Membrana y flexión + + + + Total + Plot legend item label + Total + + + Fem FEM - + Stress linearization plot Gráfica de linearización de esfuerzo - + Define/create stress linearization plots Definir/crear gráficas de linearización de esfuerzo - - + + Wrong selection Selección incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Seleccione un filtro de clip que recorra un campo de ESFUERZO a lo largo de una línea, por favor. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem FEM - + Post pipeline from result Publicar tubería del resultado - + Creates a post processing pipeline from a result object Crea una tubería de post-procesamiento a partir de un objeto resultado - + Wrong selection type Tipo de selección incorrecta - + Select a result object, please. Seleccione un objeto de resultado, por favor. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem FEM - + Scalar clip filter Filtro de clip escalar - + Define/create a clip filter which clips a field with a scalar value Definir/crear un filtro de clip que recorte un campo con un valor escalar @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM - + Warp filter Filtro de deformación - + Warp the geometry along a vector field by a certain factor Deformar la geometría a lo largo de un campo vectorial por un factor determinado @@ -659,12 +695,12 @@ Crear filtro - + Create function Crear función - + Create pipeline from result Crear tubería desde resultado @@ -894,17 +930,17 @@ Por favor, primero seleccione un tipo de resultado. FEM: there are no nodes in result mesh, there will be nothing to show. - FEM: there are no nodes in result mesh, there will be nothing to show. + FEM: no hay nodos en la malla resultante, no habrá nada que mostrar. Empty result mesh - Empty result mesh + Malla resultante vacía FEM: Graphical bending stress output for beam or shell FEM Meshes not yet supported. - FEM: Graphical bending stress output for beam or shell FEM Meshes not yet supported. + FEM: La salida gráfica para flexión para mallas FEM de vigas o placas aún no está soportada. @@ -1377,12 +1413,12 @@ Por favor, primero seleccione un tipo de resultado. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crear un plano de función, definida por su origen y normal - + Create a sphere function, defined by its center and radius Crear una función de esfera, definida por su centro y radio @@ -3042,7 +3078,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostCut - + Function cut, choose implicit function Función cortada, elegir función implícita @@ -3054,11 +3090,17 @@ de que "MAXKOI" necesita ser aumentado. Data along a line options Opciones de datos a lo largo de una línea + + + Length + X-Axis plot label + Longitud + FemGui::TaskPostDataAtPoint - + Data at point options Opciones de datos de punto @@ -3082,7 +3124,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostScalarClip - + Scalar clip options Opciones de clip escalar @@ -3090,7 +3132,7 @@ de que "MAXKOI" necesita ser aumentado. FemGui::TaskPostWarpVector - + Warp options Opciones de deformación @@ -3532,7 +3574,10 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de enlace + + + @@ -3541,9 +3586,6 @@ de que "MAXKOI" necesita ser aumentado. - - - 0 mm 0 mm @@ -3558,11 +3600,11 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de Centrífuga + + - - Parameter Parámetro @@ -3592,9 +3634,9 @@ de que "MAXKOI" necesita ser aumentado. Parámetro de Sección de Impresión - - + + Constraint Properties Propiedades de Restricción @@ -3609,14 +3651,14 @@ de que "MAXKOI" necesita ser aumentado. Potencial eléctrico en V - - - + + - - + + + unspecified no especificado @@ -3719,30 +3761,30 @@ de que "MAXKOI" necesita ser aumentado. Rotación: - + Velocity x: Velocidad x: - + Velocity y: Velocidad y: - + Velocity z: Velocidad z: - - - + + + m/s m/s @@ -3935,26 +3977,26 @@ de que "MAXKOI" necesita ser aumentado. Editar restricción + + + + + + - - - - - - A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas + + + + + + - - - - - - Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -4086,10 +4128,10 @@ de que "MAXKOI" necesita ser aumentado. Grupos - - + + Are you sure you want to continue? ¿Está seguro de que desea continuar? @@ -4229,8 +4271,8 @@ y colorea en consecuencia la malla resultante Enter here an equation to be calculated. For possible variables, see the description box below. - Enter here an equation to be calculated. -For possible variables, see the description box below. + Introduzca aquí una ecuación para calcular. +Para posibles variables, vea el cuadro de descripción a continuación. @@ -4300,22 +4342,22 @@ For possible variables, see the description box below. med princ. stress vector: s2x, s2y, s2z - med princ. stress vector: s2x, s2y, s2z + vector de esfuerzo principal med: s2x, s2y, s2z med principal stress: P2 - med principal stress: P2 + esfuerzo principal med: P2 min princ. stress vector: s1x, s1y, s1z - min princ. stress vector: s1x, s1y, s1z + vector de esfuerzo principal mín: s1x, s1y, s1z min principal stress: P3 - min principal stress: P3 + esfuerzo principal mínimo: P3 @@ -4442,10 +4484,10 @@ following referencing objects might be lost: siguiente objeto de referencia podría perderse: - - + + Object dependencies Dependencias del objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index 67ca9bace3..de674de5d2 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index afa25c9dcb..6c77deff89 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Aplikatu aldaketak kanalizazioari - + Apply changes to parameters directly and not on recompute only... Aplikatu parametroak aldaketak zuzenean eta ez birkalkulatzean soilik... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Eskualde-ebaketako iragazkia - + Define/create a clip filter which uses functions to define the cliped region Definitu/sortu eskualde ebaki bat definitzeko funtzioak erabiltzen dituen ebaketa-iragazki bat - + Wrong selection Hautapen okerra - + Select a pipeline, please. Hautatu kanalizazio bat, mesedez. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Datuak puntuan @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Eskualde-mozketako iragazkia - + Cut the data along an implicit function Moztu datuak funtzio inplizitu baten luzeran @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Lerro-ebaketako iragazkia - + Define/create a clip filter which clips a field along a line Definitu/sortu eremu bat lerro batean zehar ebakitzen duen ebaketa-iragazki bat @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Datuak puntuan ebakitzeko iragazkia - + Define/create a clip filter which clips a field data at point Definitu/sortu eremu bateko datuak puntu baten ebakitzen duen ebaketa-iragazki bat @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Iragazki-funtzioak - + Functions for use in postprocessing filter... Post-prozesatzeko iragazkian erabiliko diren funtzioak... - + Plane Planoa - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Lodiera [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Estresa [MPa] + + + + Linearized Stresses + Plot title + Estres linealizatua + + + + Membrane + Plot legend item label + Mintza + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Totala + + + Fem Fem - + Stress linearization plot Estresa linealizatzeko trazaketa - + Define/create stress linearization plots Definitu/sortu estresa linealizatzeko trazaketak - - + + Wrong selection Hautapen okerra - - + + Select a Clip filter which clips a STRESS field along a line, please. Hautatu ESTRES eremu bat lerro batean zehar ebakitzen duen ebaketa-iragazki bat. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Argitaratu kanalizazioa emaitzatik - + Creates a post processing pipeline from a result object Post-prozesuko kanalizazio bat sortzen du emaitza-objektu batetik abiatuta - + Wrong selection type Hautapen mota okerra - + Select a result object, please. Hautatu emaitzako objektua. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Ebaketa-iragazki eskalarra - + Define/create a clip filter which clips a field with a scalar value Definitu/sortu eremu bat balio eskalar batekin ebakitzen duen ebaketa-iragazki bat @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Bihurritze-iragazkia - + Warp the geometry along a vector field by a certain factor Bihurritu geometria eremu bektorial baten luzeran, faktore jakin bat erabilita @@ -659,12 +695,12 @@ Sortu iragazkia - + Create function Sortu funtzioa - + Create pipeline from result Sortu kanalizazioa emaitzatik @@ -868,7 +904,7 @@ hasierako tenperatura: Equivalent Plastic Strain - Equivalent Plastic Strain + Tentsio plastiko baliokidea @@ -879,8 +915,8 @@ hasierako tenperatura: No histogram available. Please select a result type first. - No histogram available. -Please select a result type first. + Ez dago histogramarik erabilgarri. +Hasteko, hautatu emaitza mota bat. @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Sortu plano-funtzioa, bere jatorria eta normala abiapuntutzat hartuta - + Create a sphere function, defined by its center and radius Sortu esfera-funtzioa, bere zentroa eta erradioa abiapuntutzat hartuta @@ -3044,7 +3080,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Funtzio moztua, aukeratu funtzio inplizitua @@ -3056,11 +3092,17 @@ that "MAXKOI" needs to be increased. Data along a line options Lerro baten luzeran dauden datuen aukerak + + + Length + X-Axis plot label + Luzera + FemGui::TaskPostDataAtPoint - + Data at point options Puntu bateko datuek aukerak @@ -3084,7 +3126,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Ebaketa eskalarraren aukerak @@ -3092,7 +3134,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Bihurritze-aukerak @@ -3534,7 +3576,10 @@ that "MAXKOI" needs to be increased. Lokarri-parametroa + + + @@ -3543,9 +3588,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3560,11 +3602,11 @@ that "MAXKOI" needs to be increased. Zentrifugazio-parametroa + + - - Parameter Parametroa @@ -3594,9 +3636,9 @@ that "MAXKOI" needs to be increased. Sekzio-inprimatzearen parametroa - - + + Constraint Properties Murrizketa-propietateak @@ -3611,14 +3653,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified zehaztu gabea @@ -3721,30 +3763,30 @@ that "MAXKOI" needs to be increased. Biraketa: - + Velocity x: X abiadura: - + Velocity y: Y abiadura: - + Velocity z: Z abiadura: - - - + + + m/s m/s @@ -3937,26 +3979,26 @@ that "MAXKOI" needs to be increased. Editatu murrizketa + + + + + + - - - - - - A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean + + + + + + - - - - - - Do you want to close this dialog? Koadro hori itxi nahi duzu? @@ -4088,10 +4130,10 @@ that "MAXKOI" needs to be increased. Taldeak - - + + Are you sure you want to continue? Ziur zaude jarraitu nahi duzula? @@ -4156,7 +4198,7 @@ that "MAXKOI" needs to be increased. Equivalent Plastic Strain - Equivalent Plastic Strain + Tentsio plastiko baliokidea @@ -4225,14 +4267,14 @@ and colors the result mesh accordingly Calculate - Calculate + Kalkulatu Enter here an equation to be calculated. For possible variables, see the description box below. - Enter here an equation to be calculated. -For possible variables, see the description box below. + Sartu hemen kalkulatuko den ekuazioa. +Balizko aldagaietarako, ikusi beheko deskribapen-koadroa. @@ -4444,10 +4486,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Objektuaren mendekotasunak diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm index 7c399a4077..4d3d3b44d0 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 89f3467588..c821872ed5 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem FEM-Elementtimenetelmä - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem FEM-Elementtimenetelmä - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Virheellinen valinta - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem FEM-Elementtimenetelmä - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem FEM-Elementtimenetelmä - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem FEM-Elementtimenetelmä - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem FEM-Elementtimenetelmä - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Taso - + Sphere Pallo @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem FEM-Elementtimenetelmä - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Virheellinen valinta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem FEM-Elementtimenetelmä - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem FEM-Elementtimenetelmä - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem FEM-Elementtimenetelmä - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Pituus + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parametri @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Muokkaa rajoitusta + + + + + + - - - - - - A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa + + + + + + - - - - - - Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Ryhmät - - + + Are you sure you want to continue? Oletko varma että haluat jatkaa? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Kohteiden riippuvuudet diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm index 7ce20662e0..5a8a42680f 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts index 3436084c38..adb8c9f067 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Maling pagpili - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plane - + Sphere Sphere @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Kabuuan + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Maling pagpili - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Haba + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parameter @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. I-edit ang pagpigil + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Groups - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependencies ng object diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index 2c85ad2f8f..61c40b159b 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 5090d672e4..e4419a2289 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Appliquer les modifications au pipeline - + Apply changes to parameters directly and not on recompute only... Appliquer les modifications aux paramètres directement et non pas seulement lors de la calculation... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Filtre d'écrêtage selon une région - + Define/create a clip filter which uses functions to define the cliped region Définissez/créez un filtre d'écrêtage qui utilise des fonctions pour définir la région écrêtée - + Wrong selection Sélection invalide - + Select a pipeline, please. Sélectionnez un pipeline, s'il vous plaît. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Données au point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Filtre de la fonction coupe - + Cut the data along an implicit function Couper les données le long d'une fonction implicite @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Filtre d'écrêtage selon une ligne - + Define/create a clip filter which clips a field along a line Définir/créer un filtre d'écrêtage qui écrête un champ le long d'une ligne @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Données du filtre d'écrêtage du point - + Define/create a clip filter which clips a field data at point Définir/créer un filtre d'écrêtage qui écrête les données d'un champ à un point donné @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Fonctions de filtrage - + Functions for use in postprocessing filter... Fonctions à utiliser dans le filtre de post-traitement... - + Plane Plan - + Sphere Sphère @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Épaisseur [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Contrainte [MPa] + + + + Linearized Stresses + Plot title + Contraintes linéarisées + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane et Pliage + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Graphique de linéarisation des contraintes - + Define/create stress linearization plots Définir/créer des graphiques de linéarisation des contraintes - - + + Wrong selection Sélection invalide - - + + Select a Clip filter which clips a STRESS field along a line, please. Sélectionnez un filtre d'écrêtage qui écrête un champ de contrainte le long d'une ligne, s'il vous plaît. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Afficher le pipeline à partir du résultat - + Creates a post processing pipeline from a result object Crée un pipeline de post-traitement à partir d'un objet résultat - + Wrong selection type Type de sélection incorrect - + Select a result object, please. Sélectionnez un objet résultat, s'il vous plaît. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Filtre d'écrêtage scalaire - + Define/create a clip filter which clips a field with a scalar value Définir/créer un filtre d'écrêtage qui écrête un champ avec une valeur scalaire @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Filtre de visualisation des déformations - + Warp the geometry along a vector field by a certain factor Déforme la géométrie le long d'un champ de vecteurs par un certain facteur @@ -659,12 +695,12 @@ Créer un filtre - + Create function Créer une fonction - + Create pipeline from result Créer un pipeline à partir du résultat @@ -1378,12 +1414,12 @@ Veuillez d'abord sélectionner un type de résultat. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Créer une fonction de plan, définie par son origine et sa normale - + Create a sphere function, defined by its center and radius Créer une fonction de sphère, définie par son centre et son rayon @@ -3034,7 +3070,7 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra FemGui::TaskPostCut - + Function cut, choose implicit function Coupe de fonction, choisissez une fonction implicite @@ -3046,11 +3082,17 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Data along a line options Options des données le long d'une ligne + + + Length + X-Axis plot label + Longueur + FemGui::TaskPostDataAtPoint - + Data at point options Options des données au point @@ -3074,7 +3116,7 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra FemGui::TaskPostScalarClip - + Scalar clip options Options de l'écrêtage scalaire @@ -3082,7 +3124,7 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra FemGui::TaskPostWarpVector - + Warp options Options de la déformation @@ -3524,7 +3566,10 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Paramètre de liaison + + + @@ -3533,9 +3578,6 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra - - - 0 mm 0 mm @@ -3550,11 +3592,11 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Paramètre de centrifugation + + - - Parameter Paramètre @@ -3584,9 +3626,9 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Paramètre de l'empreinte de section - - + + Constraint Properties Propriétés de contrainte @@ -3601,14 +3643,14 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Potentiel électrique en V - - - + + - - + + + unspecified non spécifié @@ -3711,30 +3753,30 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Rotation : - + Velocity x: Vitesse x : - + Velocity y: Vitesse y: - + Velocity z: Vitesse z: - - - + + + m/s m/s @@ -3927,26 +3969,26 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Modifier la contrainte + + + + + + - - - - - - A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches + + + + + + - - - - - - Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? @@ -4078,10 +4120,10 @@ Vous devrez peut-être augmenter cette valeur si vous utilisez un solveur itéra Groupes - - + + Are you sure you want to continue? Êtes-vous sûr de vouloir continuer ? @@ -4433,10 +4475,10 @@ following referencing objects might be lost: L'analyse n'est pas vide, donc les objets de référencement suivants peuvent être perdus : - - + + Object dependencies Dépendances des objets diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm index e77d14ee5f..9aaf99b512 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 26e0a702d8..c0ddeb2881 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Escolma errada - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plano - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Grosor [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Escolma errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Lonxitude + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parámetro @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotación: - + Velocity x: Velocidade x: - + Velocity y: Velocidade y: - + Velocity z: Velocidade z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Editar constrición + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupos - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependencias do obxecto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm index a41a3fbe31..cae9065583 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 24a3917279..ffdb46ba5a 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Pogrešan odabir - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Površina - + Sphere Kugla @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Ukupno + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Pogrešan odabir - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3044,7 +3080,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3056,11 +3092,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Dužina + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3084,7 +3126,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3092,7 +3134,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3534,7 +3576,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3543,9 +3588,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3560,11 +3602,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parametar @@ -3594,9 +3636,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3611,14 +3653,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3721,30 +3763,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3937,26 +3979,26 @@ that "MAXKOI" needs to be increased. Uredi ograničenje + + + + + + - - - - - - A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka + + + + + + - - - - - - Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? @@ -4088,10 +4130,10 @@ that "MAXKOI" needs to be increased. Grupe - - + + Are you sure you want to continue? Jeste li sigurni da želite nastaviti? @@ -4444,10 +4486,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Zavisnosti objekta diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index 6f27574cc4..0635bdd8a8 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index ca53b17fce..605da7642d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Végeselemes analízis FEM - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Végeselemes analízis FEM - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Rossz kijelölés - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Végeselemes analízis FEM - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Végeselemes analízis FEM - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Végeselemes analízis FEM - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Végeselemes analízis FEM - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Sík - + Sphere Gömb @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Összesen + + + Fem Végeselemes analízis FEM - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Rossz kijelölés - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Végeselemes analízis FEM - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Végeselemes analízis FEM - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Végeselemes analízis FEM - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Hossz + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Paraméter @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Kényszerítés szerkesztése + + + + + + - - - - - - A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen + + + + + + - - - - - - Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Csoportok - - + + Are you sure you want to continue? Biztosan folytatja? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Objektumfüggőségek diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm index c6eee9a94c..67d4641b99 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_id.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index af9b40fffc..fb46699d04 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Pilihan salah - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pesawat - + Sphere Lingkup @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Pilihan salah - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Panjangnya + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parameter @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Edit kendala + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Groups - - + + Are you sure you want to continue? Apakah yakin ingin melanjutkan? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Objek dependensi diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index 99049e14be..3435951f05 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 01162bd1f7..b3df4983a3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Applica le modifiche alla pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selezione errata - + Select a pipeline, please. Selezionare una pipeline, per favore. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Taglia i dati lungo una funzione implicita @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Funzioni di filtro - + Functions for use in postprocessing filter... Funzioni per l'uso nel filtro di post-elaborazione... - + Plane Piano - + Sphere Sfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Spessore [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Sforzo [MPa] + + + + Linearized Stresses + Plot title + Sollecitazioni linearizzate + + + + Membrane + Plot legend item label + Membrana + + + + Membrane and Bending + Plot legend item label + Membrana e piegatura + + + + Total + Plot legend item label + Totale + + + Fem Fem - + Stress linearization plot Grafico di linearizzazione dello stress - + Define/create stress linearization plots Definisci/crea grafici di linearizzazione dello stress - - + + Wrong selection Selezione errata - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Crea una pipeline di post-elaborazione da un oggetto risultato - + Wrong selection type Tipo di selezione errato - + Select a result object, please. Per favore seleziona un oggetto risultato @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Crea filtro - + Create function Crea una funzione. - + Create pipeline from result Crea pipeline dal risultato @@ -1378,12 +1414,12 @@ Per favore seleziona prima un tipo di risultato. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Crea una funzione piano, definita dalla sua origine e una normale al piano - + Create a sphere function, defined by its center and radius Crea una funzione di sfera, definita dal suo centro e raggio @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Lunghezza + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parametro @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Proprietà del vincolo @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified non specificato @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotazione: - + Velocity x: Velocità x: - + Velocity y: Velocità y: - + Velocity z: Velocità z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Modifica vincolo + + + + + + - - - - - - A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta + + + + + + - - - - - - Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Gruppi - - + + Are you sure you want to continue? Sei sicuro di voler continuare? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dipendenze dell'oggetto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm index 6c1c72bde5..4f810af5e9 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index c54dcdc246..ed0bdd401c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem 有限要素法 - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem 有限要素法 - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 誤った選択 - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem 有限要素法 - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限要素法 - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限要素法 - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem 有限要素法 - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 平面 - + Sphere 球体 @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + 合計 + + + Fem 有限要素法 - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 誤った選択 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem 有限要素法 - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem 有限要素法 - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限要素法 - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + 長さ + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter パラメーター @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. 拘束を編集 + + + + + + - - - - - - A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています + + + + + + - - - - - - Do you want to close this dialog? このダイアログを閉じますか？ @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. グループ - - + + Are you sure you want to continue? 本当に続行しますか？ @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies オブジェクトの依存関係 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm index 08e0c0cbfe..a5033bf26c 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index 24f069e81c..82d459e5d0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline მილსადენის ცვლილებების გადატარება - + Apply changes to parameters directly and not on recompute only... პარამეტრების ცვლილებების პირდაპირ და არა მხოლოდ გადათვლისას გადატარება... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter არეალის კვეთის ფილტრი - + Define/create a clip filter which uses functions to define the cliped region ფილტრის აღწერა/შექმნა, რომელიც კვეთის არეალის აღსაწერად ფუნქციებს იყენებს - + Wrong selection არასწორი არჩევანი - + Select a pipeline, please. გთხოვთ, აირჩიოთ მილსადენი. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point წერტილის მონაცემები @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter ამოჭრის ფუნქციის ფილტრი - + Cut the data along an implicit function მონაცემების არაცხადი ფუნქციის გასწვრივ კვეთა @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter ხაზის კვეთის ფილტრი - + Define/create a clip filter which clips a field along a line ფილტრის აღწერა/შექმნა, რომელიც ველს ხაზის გასწვრივ კვეთს @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter მონაცემების ფილტრი წერტილის ჭრილზე - + Define/create a clip filter which clips a field data at point ფილტრის აღწერა/შექმნა, რომელიც ველის მონაცემებს წერტილზე კვეთს @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions ფილტრის ფუნქციები - + Functions for use in postprocessing filter... პოსტპროცესორის ფილტრის მიერ გამოყენებული ფუნქციები... - + Plane სიბრტყე - + Sphere სფერო @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + სისქე [mm] + + + + Stress [MPa] + Plot Y-Axis Label + მექანიკური ძაბვა [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + მემბრანა + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + სულ + + + Fem Fem - + Stress linearization plot დეფორმაციის ხაზოვნების დახაზვა - + Define/create stress linearization plots განსაზღვრეთ/დაამატეთ სტრესის ხაზოვანი ნახაზები - - + + Wrong selection არასწორი არჩევანი - - + + Select a Clip filter which clips a STRESS field along a line, please. გთხოვთ, აირჩიეთ კვეთს ფილტრი, რომელიც სტრესის ველს ხაზის გასწვრივ კვეთს. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result მაჩვენე მილსადენი შედეგიდან - + Creates a post processing pipeline from a result object შედეგის ობიექტიდან მილსადენის პოსტპროცესინგის შექმნა - + Wrong selection type მონიშნულის არასწორი ტიპი - + Select a result object, please. გთხოვთ მონიშნოთ შედეგი. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter სკალარის კვეთის ფილტრი - + Define/create a clip filter which clips a field with a scalar value ფილტრის აღწერა/შექმნა, რომელიც ველს სკალარული მნიშვნელობით კვეთს @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter დეფორმაციის ვიზუალიზაციის ფილტრი - + Warp the geometry along a vector field by a certain factor გეომეტრიის მითითებული ფაქტორით დეფორმაცია ვექტორული ველის გასწვრივ @@ -659,12 +695,12 @@ ფილტრის შექმნა - + Create function ფუნქციის შექმნა - + Create pipeline from result შედეგიდან მილსადენის შექმნა @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal შექმენით სიბრტყის ფუნქცია, აღწერილი მისი საწყისი წერტილითა და ნორმალით - + Create a sphere function, defined by its center and radius შექმენით სფეროს ფუნქცია, აღწერილი მისი ცენტრით და რადიუსით @@ -3035,7 +3071,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function ფუნქციის კვეთა, აირჩიეთ არაცხადი ფუნქცია @@ -3047,11 +3083,17 @@ that "MAXKOI" needs to be increased. Data along a line options ხაზის გასწვრივი მონაცემების პარამეტრები + + + Length + X-Axis plot label + სიგრძე + FemGui::TaskPostDataAtPoint - + Data at point options წერტილის მონაცემების პარამეტრები @@ -3075,7 +3117,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options სკალარის ფილტრის მორგება @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options გადატანის პარამეტრები @@ -3525,7 +3567,10 @@ that "MAXKOI" needs to be increased. კავშირის პარამეტრი + + + @@ -3534,9 +3579,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 მმ @@ -3551,11 +3593,11 @@ that "MAXKOI" needs to be increased. ცენტრიფუგის პარამეტრი + + - - Parameter პარამეტრი @@ -3585,9 +3627,9 @@ that "MAXKOI" needs to be increased. განივი კვეთის პარამეტრი - - + + Constraint Properties შეზღუდვის თვისებები @@ -3602,14 +3644,14 @@ that "MAXKOI" needs to be increased. ელექტრული პოტენციალი ვოლტებში - - - + + - - + + + unspecified არ არის მითითებული @@ -3712,30 +3754,30 @@ that "MAXKOI" needs to be increased. ბრუნვა: - + Velocity x: აჩქარება X: - + Velocity y: აჩქარება Y: - + Velocity z: აჩქარება Z: - - - + + + m/s მ/წმ @@ -3928,26 +3970,26 @@ that "MAXKOI" needs to be increased. ზღვრის ჩასწორება + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4079,10 +4121,10 @@ that "MAXKOI" needs to be increased. ჯგუფები - - + + Are you sure you want to continue? დარწმუნებული ბრძანდებით, რომ გნებავთ გააგრძელოთ? @@ -4435,10 +4477,10 @@ following referencing objects might be lost: შემდეგი ბმის ობიექტები შეიძლება დაიკარგოს: - - + + Object dependencies ობიექტის დამოკიდებულებები diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm index 0dd49ff92f..a0f315af71 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts index 4ac61f8f2b..2598d9b290 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Netinkama pasirinktis - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plokštuma - + Sphere Rutulys @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Viso + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Netinkama pasirinktis - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Length + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Dydis @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Edit constraint + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupės - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Daikto priklausomybės diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm index ec44117c71..dbb4d34578 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index d469b80b3e..cff8afabd6 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem EEM - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem EEM - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Verkeerde selectie - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem EEM - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem EEM - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem EEM - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem EEM - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Vlak - + Sphere Bol @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Totaal + + + Fem EEM - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Verkeerde selectie - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem EEM - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem EEM - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem EEM - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Lengte + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parameter @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified ongespecificeerd @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Beperking bewerken + + + + + + - - - - - - A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster + + + + + + - - - - - - Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Groepen - - + + Are you sure you want to continue? Weet u zeker dat u wilt doorgaan? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Object afhankelijkheden diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index 1506c42115..ef050221cc 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index fbc52ad811..01bb52f922 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem MES - + Apply changes to pipeline Zastosuj zmiany do rurociągu - + Apply changes to parameters directly and not on recompute only... Zastosuj zmiany bezpośrednio do parametrów, nie tylko do ponownego przeliczenia... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem MES - + Region clip filter Filtr przycięcia obszaru - + Define/create a clip filter which uses functions to define the cliped region Zdefiniuj / dodaj filtr przycinania, który używa funkcji do określenia przyciętego obszaru - + Wrong selection Niewłaściwy wybór - + Select a pipeline, please. Proszę wybrać rurociąg. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Dane w punkcie @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem MES - + Function cut filter Filtr cięcia funkcją - + Cut the data along an implicit function Wytnij dane wzdłuż niejawnej funkcji @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem MES - + Line clip filter Filtr przycięcia linią - + Define/create a clip filter which clips a field along a line Zdefiniuj / dodaj filtr przycinania, który przycina pole wzdłuż linii @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem MES - + Data at point clip filter Filtr danych w punkcie - + Define/create a clip filter which clips a field data at point Zdefiniuj / dodaj filtr przycinania, który przycina dane pola w punkcie @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem MES - + Filter functions Funkcje filtrów - + Functions for use in postprocessing filter... Funkcje do użycia w filtrze do obróbki wyników... - + Plane Płaszczyzna - + Sphere Sfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Grubość [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Naprężenia [MPa] + + + + Linearized Stresses + Plot title + Naprężenia ukierunkowane liniowo + + + + Membrane + Plot legend item label + Naprężenie membranowe + + + + Membrane and Bending + Plot legend item label + Naprężenie membranowe i zginające + + + + Total + Plot legend item label + Łącznie + + + Fem MES - + Stress linearization plot Wykres linearyzacji naprężeń - + Define/create stress linearization plots Zdefiniuj / dodaj wykresy linearyzacji naprężeń - - + + Wrong selection Niewłaściwy wybór - - + + Select a Clip filter which clips a STRESS field along a line, please. Wybierz filtr przycinania, który przycina pole naprężeń wzdłuż linii. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem MES - + Post pipeline from result Utwórz ciąg z wyniku - + Creates a post processing pipeline from a result object Tworzy ciąg do obróbki danych z obiektu wyników - + Wrong selection type Niewłaściwy typ wyboru - + Select a result object, please. Wybierz obiekt wyników. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem MES - + Scalar clip filter Filtr przycinania skalarnego - + Define/create a clip filter which clips a field with a scalar value Zdefiniuj / dodaj filtr przycinania, który przycina pole wartością skalarną @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem MES - + Warp filter Filtr wizualizacji deformacji - + Warp the geometry along a vector field by a certain factor Zdeformuj geometrię wzdłuż pola wektorowego o określony współczynnik @@ -659,12 +695,12 @@ Utwórz filtr - + Create function Utwórz cechę - + Create pipeline from result Utwórz ciąg z wyniku @@ -1377,12 +1413,12 @@ Proszę najpierw wybrać typ wyniku. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Utwórz funkcję płaszczyzny, zdefiniowaną przez jej początek i kierunek normalny - + Create a sphere function, defined by its center and radius Utwórz funkcję kuli, zdefiniowaną przez jej środek i promień @@ -3035,7 +3071,7 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, FemGui::TaskPostCut - + Function cut, choose implicit function Funkcja cięcia, wybierz funkcję niejawną @@ -3047,11 +3083,17 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Data along a line options Opcje danych wzdłuż linii + + + Length + X-Axis plot label + Długość + FemGui::TaskPostDataAtPoint - + Data at point options Opcje danych w punkcie @@ -3075,7 +3117,7 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, FemGui::TaskPostScalarClip - + Scalar clip options Opcje przycinania skalarnego @@ -3083,7 +3125,7 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, FemGui::TaskPostWarpVector - + Warp options Opcje wizualizacji deformacji @@ -3525,7 +3567,10 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Parametr kontaktu wiązanego + + + @@ -3534,9 +3579,6 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, - - - 0 mm 0 mm @@ -3551,11 +3593,11 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Parametr wirowania + + - - Parameter Parametry @@ -3585,9 +3627,9 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Parametr wyników z przekroju - - + + Constraint Properties Właściwości wiązań @@ -3602,14 +3644,14 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Potencjał elektryczny w V - - - + + - - + + + unspecified nieokreślony @@ -3712,30 +3754,30 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Obrót: - + Velocity x: Prędkość x: - + Velocity y: Prędkość y: - + Velocity z: Prędkość z: - - - + + + m/s m/s @@ -3928,26 +3970,26 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Edytuj wiązanie + + + + + + - - - - - - A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań + + + + + + - - - - - - Do you want to close this dialog? Czy chcesz zamknąć to okno dialogowe? @@ -4079,10 +4121,10 @@ iteracyjnego solvera, gdy pojawi się komunikat o błędzie, Grupy - - + + Are you sure you want to continue? Czy na pewno chcesz kontynuować? @@ -4435,10 +4477,10 @@ following referencing objects might be lost: następujące obiekty odniesienia mogą zostać utracone: - - + + Object dependencies Zależności obiektów diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm index c72ca13db5..feab1f3ab5 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index d3da327e6e..d04ada1ba9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem MEF - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem MEF - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Seleção errada - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem MEF - + Function cut filter Função filtro de corte - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem MEF - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem MEF - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem MEF - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plano - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem MEF - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Seleção errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem MEF - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem MEF - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem MEF - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Comprimento + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parâmetro @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Editar restrição + + + + + + - - - - - - A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas + + + + + + - - - - - - Do you want to close this dialog? Deseja fechar este diálogo? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupos - - + + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependências do objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index ab5017b7ac..0ba326ec2d 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 7ad5e78aa5..35beb0c299 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Seleção errada - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plano - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Seleção errada - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Comprimento + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parâmetro @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Editar restrição + + + + + + - - - - - - A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas + + + + + + - - - - - - Do you want to close this dialog? Deseja fechar esta janela? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupos - - + + Are you sure you want to continue? Tem certeza que deseja continuar? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependências do objeto diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm index 245cdc6c8d..ecf0ccc64f 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 288da90a38..c5cde024bc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Metoda elementelor finite - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Metoda elementelor finite - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecţie greşită - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Metoda elementelor finite - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Metoda elementelor finite - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Metoda elementelor finite - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Metoda elementelor finite - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plan - + Sphere Sfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Metoda elementelor finite - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecţie greşită - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Metoda elementelor finite - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Metoda elementelor finite - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Metoda elementelor finite - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Lungime + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parametru @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Editare restricţie + + + + + + - - - - - - A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini + + + + + + - - - - - - Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupuri - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependențe obiect diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index 3dfe8fc2ae..57a96984fa 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 5b479fa847..a2598d48e9 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem МКЭ (метод конечных элементов) - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem МКЭ (метод конечных элементов) - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Неправильный выбор - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem МКЭ (метод конечных элементов) - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem МКЭ (метод конечных элементов) - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem МКЭ (метод конечных элементов) - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem МКЭ (метод конечных элементов) - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Плоскость - + Sphere Сфера @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Толщина [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Механическое напряжение [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Мембрана + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Итог + + + Fem МКЭ (метод конечных элементов) - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Неправильный выбор - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem МКЭ (метод конечных элементов) - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem МКЭ (метод конечных элементов) - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem МКЭ (метод конечных элементов) - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Длина + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Параметр @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s м/с @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Изменить граничное условие + + + + + + - - - - - - A dialog is already open in the task panel Диалог уже открыт в панели задач + + + + + + - - - - - - Do you want to close this dialog? Вы хотите закрыть этот диалог? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Группы - - + + Are you sure you want to continue? Вы уверены, что хотите продолжить? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Зависимости объектов diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm index b5e7339e63..d8ae054c6c 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 49da4f8076..6fc1484a3f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Mke - + Apply changes to pipeline Uporabi spremembe na cevovodu - + Apply changes to parameters directly and not on recompute only... Uveljavi spremembe določilk neposredno in ne le pri preračunu ... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Mke - + Region clip filter Sito obrezave območja - + Define/create a clip filter which uses functions to define the cliped region Določi/ustvari izrezno sito, ki za določanje izreznega območja uporablja funkcije - + Wrong selection Napačna izbira - + Select a pipeline, please. Izberite cevovod. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Podatki na točki @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Mke - + Function cut filter Function cut filter - + Cut the data along an implicit function Poreži podatke po implicitni (sovsebni) funkciji @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Mke - + Line clip filter Sito porezave črte - + Define/create a clip filter which clips a field along a line Določi/ustvari izrezno sito, ki prereže polje vzdolž črte @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Mke - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Določi/ustvari izrezno sito, ki prereže podatke polja v točki @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Mke - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Ravnina - + Sphere Krogla @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Debelina [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Napetost [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Skupaj + + + Fem Mke - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Napačna izbira - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Mke - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Napačna vrsta izbiranja - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Mke - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Določi/ustvari izrezno sito, ki prereže polje s skalarno vrednostjo @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Mke - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Ustvari sito - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Izberite najprej vrsto izida. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Dolžina + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Določilka @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Uredi omejitev + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Skupine - - + + Are you sure you want to continue? Ali ste prepričani da želite nadaljevati? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Odvisnosti predmetov diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index 111fc82839..158940bf17 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 83c5d45f26..bb6ec90b96 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Fel val - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Plan - + Sphere Sfär @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Totalt + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Fel val - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Skapa filter - + Create function Skapa funktion - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Välj en resultattyp först. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Längd + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp-alternativ @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Parameter @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified ospecificerad @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Hastighet x: - + Velocity y: Hastighet y: - + Velocity z: Hastighet z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Redigera begränsning + + + + + + - - - - - - A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen + + + + + + - - - - - - Do you want to close this dialog? Vill du stänga denna dialogruta? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grupper - - + + Are you sure you want to continue? Är du säker på att du vill fortsätta? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Objektberoenden diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 0c7a2937ee..b1c54a3112 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 95abc63c8c..b2952abe76 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Sonlu elemanlar yöntemi - + Apply changes to pipeline İş hattına değişiklikleri uygula - + Apply changes to parameters directly and not on recompute only... Değişiklikleri yalnızca yeniden hesaplamada değil, doğrudan parametrelere uygulayın... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Sonlu elemanlar yöntemi - + Region clip filter Bölge alıntısı süzgeci - + Define/create a clip filter which uses functions to define the cliped region Alıntılanmış bölgeyi tanımlamak için işlevler kullanan bir alıntı süzgeci tanımlayın/oluşturun - + Wrong selection Yanlış seçim - + Select a pipeline, please. Bir iş hattı seçiniz, lütfen. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Noktasal Veri @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Sonlu elemanlar yöntemi - + Function cut filter Kesme filtresi fonksiyonu - + Cut the data along an implicit function Verileri örtük bir fonksiyon boyunca kesin @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Sonlu elemanlar yöntemi - + Line clip filter Çizgi alıntı süzgeci - + Define/create a clip filter which clips a field along a line Bir çizgi boyunca bir alanı alıntılayan alıntı süzgeci tanımlayın/oluşturun @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Sonlu elemanlar yöntemi - + Data at point clip filter Noktasal veri alıntısı süzgeci - + Define/create a clip filter which clips a field data at point Noktasal veri alanını alıntılayan bir alıntı süzgeci tanımlayın/oluşturun @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Sonlu elemanlar yöntemi - + Filter functions Süzgeç işlevleri - + Functions for use in postprocessing filter... İşlem sonrası filtrede kullanılacak fonksiyonlar... - + Plane Düzlem - + Sphere Küre @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Toplam + + + Fem Sonlu elemanlar yöntemi - + Stress linearization plot Gerilme doğrusallaştırma grafiği - + Define/create stress linearization plots Gerilme doğrusallaştırma grafiklerini tanımlayın/oluşturun - - + + Wrong selection Yanlış seçim - - + + Select a Clip filter which clips a STRESS field along a line, please. Bir çizgi boyunca bir STRES alanını kırpan bir Darbe filtresi seçin, lütfen. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Sonlu elemanlar yöntemi - + Post pipeline from result Sonuçtaki iş hattını yayınla - + Creates a post processing pipeline from a result object Bir sonuç nesnesinden bir işlem sonrası oluşturur - + Wrong selection type Yanlış seçim türü - + Select a result object, please. Bir sonuç nesnesi seçin, lütfen. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Sonlu elemanlar yöntemi - + Scalar clip filter Skaler kırpma filtresi - + Define/create a clip filter which clips a field with a scalar value Skaler değere sahip bir alanı kırpan bir kırpma filtresi tanımlayın/oluşturun @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Sonlu elemanlar yöntemi - + Warp filter Saptırma filtresi - + Warp the geometry along a vector field by a certain factor Geometriyi bir vektör alanı boyunca belirli bir etkenle saptırın @@ -659,12 +695,12 @@ Filtre edici oluşturun - + Create function Fonksiyon oluştur - + Create pipeline from result Sonuçtan iş hattı oluştur @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Başlangıç noktası ve dik yönüne göre tanımlanan bir düzlem işlevi oluştur - + Create a sphere function, defined by its center and radius Merkezi ve yarıçapına göre tanımlanan bir küre işlevi oluştur @@ -3034,7 +3070,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Kesilecek, örtük fonksiyonu seçiniz @@ -3046,11 +3082,17 @@ that "MAXKOI" needs to be increased. Data along a line options Çizgisel veri seçenekleri + + + Length + X-Axis plot label + Uzunluk + FemGui::TaskPostDataAtPoint - + Data at point options Noktasal veri seçenekleri @@ -3074,7 +3116,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Skaler kırpma seçenekleri @@ -3082,7 +3124,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Saptırma seçenekleri @@ -3524,7 +3566,10 @@ that "MAXKOI" needs to be increased. Bağlantı Parametresi + + + @@ -3533,9 +3578,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3550,11 +3592,11 @@ that "MAXKOI" needs to be increased. Merkezkaç değişkeni + + - - Parameter Parametre @@ -3584,9 +3626,9 @@ that "MAXKOI" needs to be increased. Bölüm baskısı parametresi - - + + Constraint Properties Kısıtlama Özellikleri @@ -3601,14 +3643,14 @@ that "MAXKOI" needs to be increased. V biriminde elektrik potansiyeli - - - + + - - + + + unspecified belirtilmemiş @@ -3711,30 +3753,30 @@ that "MAXKOI" needs to be increased. Dönüş: - + Velocity x: Hız x: - + Velocity y: Hız y: - + Velocity z: Hız z: - - - + + + m/s m/s @@ -3927,26 +3969,26 @@ that "MAXKOI" needs to be increased. Kısıt düzenleme + + + + + + - - - - - - A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık + + + + + + - - - - - - Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? @@ -4078,10 +4120,10 @@ that "MAXKOI" needs to be increased. Gruplar - - + + Are you sure you want to continue? Devam etmek istediğinizden emin misiniz? @@ -4434,10 +4476,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Nesne bağımlılıkları diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm index 1db9d46747..3e8ca037b0 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index fd170257e8..2b9cb363ed 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem МСЕ (Метод скінченних елементів) - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem МСЕ (Метод скінченних елементів) - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Невірний вибір - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem МСЕ (Метод скінченних елементів) - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem МСЕ (Метод скінченних елементів) - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem МСЕ (Метод скінченних елементів) - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem МСЕ (Метод скінченних елементів) - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Площини - + Sphere Сфера @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Всього + + + Fem МСЕ (Метод скінченних елементів) - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Невірний вибір - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem МСЕ (Метод скінченних елементів) - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem МСЕ (Метод скінченних елементів) - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem МСЕ (Метод скінченних елементів) - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1377,12 +1413,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Створити функцію площини, яка визначається її початком координат та нормаллю - + Create a sphere function, defined by its center and radius Створити функцію сфери, яка визначається її центром та радіусом @@ -3044,7 +3080,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3056,11 +3092,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Довжина + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3084,7 +3126,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3092,7 +3134,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3534,7 +3576,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3543,9 +3588,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 мм @@ -3560,11 +3602,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Параметр @@ -3594,9 +3636,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3611,14 +3653,14 @@ that "MAXKOI" needs to be increased. Електричний потенціал в V - - - + + - - + + + unspecified unspecified @@ -3721,30 +3763,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3937,26 +3979,26 @@ that "MAXKOI" needs to be increased. Редагувати обмеження + + + + + + - - - - - - A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач + + + + + + - - - - - - Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? @@ -4088,10 +4130,10 @@ that "MAXKOI" needs to be increased. Групи - - + + Are you sure you want to continue? Ви впевнені, що бажаєте продовжити? @@ -4444,10 +4486,10 @@ following referencing objects might be lost: такі посилання на об'єкти можуть бути втрачені: - - + + Object dependencies Залежності обʼєктів diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm index 5e77b97a4e..144629d084 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 1355f6dba8..a464ea0394 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Selecció incorrecta - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Pla - + Sphere Esfera @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Selecció incorrecta - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Longitud + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Paràmetre @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. Edita la restricció + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. Grups - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Dependències de l'objecte diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm index 851783fac3..c53d45b3c6 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index b04ef4a9d2..b7ba1d1671 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem Fem - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem Fem - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection Lựa chọn sai - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem Fem - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem Fem - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem Fem - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem Fem - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane Mặt phẳng - + Sphere Hình cầu @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Tổng + + + Fem Fem - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection Lựa chọn sai - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem Fem - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem Fem - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem Fem - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Tạo bộ lọc - + Create function Tạo hàm - + Create pipeline from result Tạo ống dẫn từ kết quả @@ -1377,12 +1413,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Tạo một hàm mặt phẳng, xác định bởi gốc và pháp tuyến - + Create a sphere function, defined by its center and radius Tạo hàm cầu, xác định bởi tâm và bán kính @@ -3038,7 +3074,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3050,11 +3086,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + Chiều dài + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3078,7 +3120,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3086,7 +3128,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3528,7 +3570,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3537,9 +3582,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3554,11 +3596,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter Tham số @@ -3588,9 +3630,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3605,14 +3647,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3715,30 +3757,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3931,26 +3973,26 @@ that "MAXKOI" needs to be increased. Chỉnh sửa giới hạn + + + + + + - - - - - - A dialog is already open in the task panel A dialog is already open in the task panel + + + + + + - - - - - - Do you want to close this dialog? Do you want to close this dialog? @@ -4082,10 +4124,10 @@ that "MAXKOI" needs to be increased. Nhóm - - + + Are you sure you want to continue? Are you sure you want to continue? @@ -4438,10 +4480,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies Phụ thuộc đối tượng diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm index c8e844e24f..6e0d176d85 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index 071aa0fb9f..9c1a3d488d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem 有限元 - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem 有限元 - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 选择错误 - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem 有限元 - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限元 - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限元 - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem 有限元 - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 平面 - + Sphere 球体 @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + 厚度 [mm] + + + + Stress [MPa] + Plot Y-Axis Label + 压强 [MPa] + + + + Linearized Stresses + Plot title + 线性压强 + + + + Membrane + Plot legend item label + 薄膜 + + + + Membrane and Bending + Plot legend item label + 薄膜和弯曲 + + + + Total + Plot legend item label + 总计 + + + Fem 有限元 - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 选择错误 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem 有限元 - + Post pipeline from result 从结果创建后处理管线 - + Creates a post processing pipeline from a result object 从结果对象创建后处理管线 - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem 有限元 - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限元 - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal 创建一个平面函数，由其原点和法线定义 - + Create a sphere function, defined by its center and radius 创建一个球形函数，由其球心和半径定义 @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + 长度 + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter 参数 @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties 约束属性 @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. 电位（伏特） - - - + + - - + + + unspecified 未指定 @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. 旋转: - + Velocity x: X方向速度： - + Velocity y: Y方向速度： - + Velocity z: Z方向速度： - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. 编辑约束 + + + + + + - - - - - - A dialog is already open in the task panel 一个对话框已在任务面板打开 + + + + + + - - - - - - Do you want to close this dialog? 您要关闭此对话框吗? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. 组 - - + + Are you sure you want to continue? 您确定要继续吗？ @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies 对象依赖关系 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm index 98b14b0750..02097a96e5 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 17dbb3f2d0..29eae8f224 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -334,17 +334,17 @@ CmdFemPostApllyChanges - + Fem 有限元素法 - + Apply changes to pipeline Apply changes to pipeline - + Apply changes to parameters directly and not on recompute only... Apply changes to parameters directly and not on recompute only... @@ -352,27 +352,27 @@ CmdFemPostClipFilter - + Fem 有限元素法 - + Region clip filter Region clip filter - + Define/create a clip filter which uses functions to define the cliped region Define/create a clip filter which uses functions to define the cliped region - + Wrong selection 錯誤的選取 - + Select a pipeline, please. Select a pipeline, please. @@ -380,7 +380,7 @@ CmdFemPostCreateDataAtPointFilter - + Data At Point Data At Point @@ -388,17 +388,17 @@ CmdFemPostCutFilter - + Fem 有限元素法 - + Function cut filter Function cut filter - + Cut the data along an implicit function Cut the data along an implicit function @@ -406,17 +406,17 @@ CmdFemPostDataAlongLineFilter - + Fem 有限元素法 - + Line clip filter Line clip filter - + Define/create a clip filter which clips a field along a line Define/create a clip filter which clips a field along a line @@ -424,17 +424,17 @@ CmdFemPostDataAtPointFilter - + Fem 有限元素法 - + Data at point clip filter Data at point clip filter - + Define/create a clip filter which clips a field data at point Define/create a clip filter which clips a field data at point @@ -442,27 +442,27 @@ CmdFemPostFunctions - + Fem 有限元素法 - + Filter functions Filter functions - + Functions for use in postprocessing filter... Functions for use in postprocessing filter... - + Plane 平面 - + Sphere 球體 @@ -470,29 +470,65 @@ CmdFemPostLinearizedStressesFilter - + + Thickness [mm] + Plot X-Axis Label + Thickness [mm] + + + + Stress [MPa] + Plot Y-Axis Label + Stress [MPa] + + + + Linearized Stresses + Plot title + Linearized Stresses + + + + Membrane + Plot legend item label + Membrane + + + + Membrane and Bending + Plot legend item label + Membrane and Bending + + + + Total + Plot legend item label + Total + + + Fem 有限元素法 - + Stress linearization plot Stress linearization plot - + Define/create stress linearization plots Define/create stress linearization plots - - + + Wrong selection 錯誤的選取 - - + + Select a Clip filter which clips a STRESS field along a line, please. Select a Clip filter which clips a STRESS field along a line, please. @@ -500,27 +536,27 @@ CmdFemPostPipelineFromResult - + Fem 有限元素法 - + Post pipeline from result Post pipeline from result - + Creates a post processing pipeline from a result object Creates a post processing pipeline from a result object - + Wrong selection type Wrong selection type - + Select a result object, please. Select a result object, please. @@ -528,17 +564,17 @@ CmdFemPostScalarClipFilter - + Fem 有限元素法 - + Scalar clip filter Scalar clip filter - + Define/create a clip filter which clips a field with a scalar value Define/create a clip filter which clips a field with a scalar value @@ -546,17 +582,17 @@ CmdFemPostWarpVectorFilter - + Fem 有限元素法 - + Warp filter Warp filter - + Warp the geometry along a vector field by a certain factor Warp the geometry along a vector field by a certain factor @@ -659,12 +695,12 @@ Create filter - + Create function Create function - + Create pipeline from result Create pipeline from result @@ -1378,12 +1414,12 @@ Please select a result type first. FEM_PostCreateFunctions - + Create a plane function, defined by its origin and normal Create a plane function, defined by its origin and normal - + Create a sphere function, defined by its center and radius Create a sphere function, defined by its center and radius @@ -3043,7 +3079,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostCut - + Function cut, choose implicit function Function cut, choose implicit function @@ -3055,11 +3091,17 @@ that "MAXKOI" needs to be increased. Data along a line options Data along a line options + + + Length + X-Axis plot label + 間距 + FemGui::TaskPostDataAtPoint - + Data at point options Data at point options @@ -3083,7 +3125,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostScalarClip - + Scalar clip options Scalar clip options @@ -3091,7 +3133,7 @@ that "MAXKOI" needs to be increased. FemGui::TaskPostWarpVector - + Warp options Warp options @@ -3533,7 +3575,10 @@ that "MAXKOI" needs to be increased. Tie parameter + + + @@ -3542,9 +3587,6 @@ that "MAXKOI" needs to be increased. - - - 0 mm 0 mm @@ -3559,11 +3601,11 @@ that "MAXKOI" needs to be increased. Centrif parameter + + - - Parameter 參數 @@ -3593,9 +3635,9 @@ that "MAXKOI" needs to be increased. SectionPrint parameter - - + + Constraint Properties Constraint Properties @@ -3610,14 +3652,14 @@ that "MAXKOI" needs to be increased. Electric potential in V - - - + + - - + + + unspecified unspecified @@ -3720,30 +3762,30 @@ that "MAXKOI" needs to be increased. Rotation: - + Velocity x: Velocity x: - + Velocity y: Velocity y: - + Velocity z: Velocity z: - - - + + + m/s m/s @@ -3936,26 +3978,26 @@ that "MAXKOI" needs to be increased. 編輯拘束 + + + + + + - - - - - - A dialog is already open in the task panel 於工作面板已開啟對話窗 + + + + + + - - - - - - Do you want to close this dialog? 您確定要關閉此對話窗嗎? @@ -4087,10 +4129,10 @@ that "MAXKOI" needs to be increased. 群組 - - + + Are you sure you want to continue? 您確定要繼續嗎? @@ -4443,10 +4485,10 @@ following referencing objects might be lost: following referencing objects might be lost: - - + + Object dependencies 物件相依 diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.qm b/src/Mod/Image/Gui/Resources/translations/Image_de.qm index 7727b46cf7..9037ebd377 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_de.qm and b/src/Mod/Image/Gui/Resources/translations/Image_de.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.ts b/src/Mod/Image/Gui/Resources/translations/Image_de.ts index 2d1c207151..8f6da04a22 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_de.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_de.ts @@ -83,12 +83,12 @@ Enter distance - Enter distance + Abstand eingeben Select ImagePlane - Select ImagePlane + Bildebene auswählen diff --git a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm index 648b0ae980..7cda4801d6 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_eu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_eu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_eu.ts b/src/Mod/Image/Gui/Resources/translations/Image_eu.ts index 208a5a5d70..13c0a52cc2 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_eu.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_eu.ts @@ -83,12 +83,12 @@ Enter distance - Enter distance + Sartu distantzia Select ImagePlane - Select ImagePlane + Hautatu irudi-planoa diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index 8b2e462574..2d3ccc39cc 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -2389,8 +2389,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Ix del mode info diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index fbed3ce00f..f9f19bf209 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -2397,8 +2397,8 @@ Prosím navštivte http://www.openscad.org/index.html a nainstalujte ho.Display colors - + Leave info mode Opustit info režim diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm index 465b619635..ef73a169e4 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index 946aa97f9f..b7dd0f05e5 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -2394,8 +2394,8 @@ Bitte besuchen Sie http://www.openscad.org/index.html, um es zu installieren.Farben anzeigen - + Leave info mode Info-Modus verlassen diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts index 8bcad67453..331930b120 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_el.ts @@ -2397,8 +2397,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Έξοδος από τη λειτουργία πληροφοριών diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-AR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-AR.ts index 67dcc594c5..8ba0505256 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-AR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-AR.ts @@ -2394,8 +2394,8 @@ Please visit http://www.openscad.org/index.html to install it. Colores de pantalla - + Leave info mode Salir del modo información diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts index 998c8da9e3..10b8e86031 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts @@ -2394,8 +2394,8 @@ Please visit http://www.openscad.org/index.html to install it. Colores de pantalla - + Leave info mode Salir del modo información diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm index 293dd2a0a2..7bcd88913e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts index fe39525e4a..612f2235ad 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_eu.ts @@ -2123,7 +2123,7 @@ itxura leunagoa ematen du. Number of facets: - Number of facets: + Alderdi kopurua: @@ -2398,8 +2398,8 @@ Jo http://www.openscad.org/index.html helbidera hura instalatzeko. Bistaratu koloreak - + Leave info mode Utzi informazio modua diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts index a76694e716..88e370b402 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts @@ -2398,8 +2398,8 @@ osoittweessa asentaaksesi ohjelman. Display colors - + Leave info mode Poistu Tieto tilasta diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts index 693235e43c..f8223b82c8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fil.ts @@ -2396,8 +2396,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Lisanin ang info mode diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm index 4dd5cc2f18..445019999d 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index bc1bc6bf10..33c0e84297 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -2122,33 +2122,33 @@ Avec l'ombrage à plat les normales de surface ne sont pas définies par un somm Number of facets: - Number of facets: + Nombre de facettes : Minimum bound: - Minimum bound: + Limite minimale : Maximum bound: - Maximum bound: + Limite maximale : Mesh info box - Mesh info box + Boîte d'information du maillage Mesh info - Mesh info + Informations sur le maillage X: %1 Y: %2 Z: %3 - X: %1 Y: %2 Z: %3 + X: %1 Y: %2 Z: %3 @@ -2397,8 +2397,8 @@ Merci de visiter http://www.openscad.org/index.html pour l'installer.Affichage des couleurs - + Leave info mode Quitter le mode d'information diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts index dadc4a6f24..ba094dc8c8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_gl.ts @@ -2396,8 +2396,8 @@ Por favor visite http://www.openscad.org/index.html para instalalo.Display colors - + Leave info mode Saír do modo de información diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts index a90061481d..499ec63baf 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts @@ -2399,8 +2399,8 @@ Posjetite http://www.openscad.org/index.html da biste ga instalirali.Display colors - + Leave info mode Zatvori info način rada diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts index 4d5a406efa..d9f770c8ea 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts @@ -2395,8 +2395,8 @@ Please visit http://www.openscad.org/index.html to install it. Megjelenített színek - + Leave info mode Hagyja az info módot diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts index 861c60b352..82dfc75a9e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_id.ts @@ -2396,8 +2396,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Tinggalkan info mode diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts index 67c555089b..1056a99888 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts @@ -2392,8 +2392,8 @@ Please visit http://www.openscad.org/index.html to install it. Visualizza colori - + Leave info mode Esci dalla modalità info diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts index 0720b3e2f9..c8540fdc63 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts @@ -2392,8 +2392,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode 情報モードを解除 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts index 2fe5e9e8be..52f1287a4f 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ka.ts @@ -2397,8 +2397,8 @@ Please visit http://www.openscad.org/index.html to install it. ფერების ჩვენება - + Leave info mode საინფორმაციო რეჟიმიდან გასვლა diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts index 4cf9f1a140..2f2a1e451c 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_lt.ts @@ -2391,8 +2391,8 @@ Norėdami įdiegti programą, prašome aplankyti http://www.openscad.org/index.h Display colors - + Leave info mode Išeiti iš duomenų pateikimo režimo diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index 63031bb4ab..8d79141af7 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -2398,8 +2398,8 @@ Gelieve naar http://www.openscad.org/index.html te gaan om het te installeren.Display colors - + Leave info mode Info modus verlaten diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index 802976b162..476585ad58 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -2398,8 +2398,8 @@ Odwiedź http://www.openscad.org/index.html żeby go zainstalować.Wyświetlane kolory - + Leave info mode Opuść tryb informacyjny diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index b91fd04623..65dde332b0 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -2397,8 +2397,8 @@ Favor visitar http://www.openscad.org/index.html para instalá-lo. Display colors - + Leave info mode Sair do modo de info diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts index b254caa1a8..9ebefa5ed3 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts @@ -2397,8 +2397,8 @@ Visite http://www.openscad.org/index.html para instalá-lo. Display colors - + Leave info mode Sair do modo de informação diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index 1ae869c620..dc4c737ec8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -2397,8 +2397,8 @@ Vizitați http://www.openscad.org/index.html pentru a-l instala. Display colors - + Leave info mode Parasiti modul informare diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 770a26b79a..ac466f5141 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -2394,8 +2394,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Выйти из информационного режима diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts index 0a4c94b7ab..56b937f7e9 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts @@ -2398,8 +2398,8 @@ Za namestitev obiščite http://www.openscad.org/index.html. Barve prikaza - + Leave info mode Zapusti podatkovni način diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index 67bbece77c..fdf4845161 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -2397,8 +2397,8 @@ Besök http://www.openscad.org/index.html för att installera det. Visa färger - + Leave info mode Lämna info läge diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts index 84a46c85ef..10359ab364 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts @@ -2396,8 +2396,8 @@ Yüklemek için lütfen http://www.openscad.org/index.html adresini ziyaret edin Display colors - + Leave info mode Bilgi modundan çık diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts index 29d9338b51..ef95036260 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts @@ -2395,8 +2395,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Вийти з інформаційного режиму diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts index a02b4a6749..b14fb4bc46 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_val-ES.ts @@ -2389,8 +2389,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode Ix del mode info diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts index 8f1ce3dd60..6fc0ee0e87 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_vi.ts @@ -2398,8 +2398,8 @@ Vui lòng truy cập http://www.openscad.org/index.html để cài đặt.Display colors - + Leave info mode Rời khỏi chế độ thông tin diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts index 3abdda6ebf..d024e1ecc4 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts @@ -2396,8 +2396,8 @@ Please visit http://www.openscad.org/index.html to install it. 显示颜色 - + Leave info mode 退出查询模式 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 9adbc48cac..0f1f237ac2 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -2397,8 +2397,8 @@ Please visit http://www.openscad.org/index.html to install it. Display colors - + Leave info mode 離開訊息模式 diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm index 229cc39fcc..d06a4a336f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts index 2327115bbd..d14b1660d4 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts @@ -67,7 +67,7 @@ Send to OpenSCAD via: - Send to OpenSCAD via: + An OpenSCAD senden über: @@ -77,12 +77,12 @@ Standard temp directory - Standard temp directory + Standardmäßiges temporäres Verzeichnis User-specified directory - User-specified directory + Benutzerdefiniertes Verzeichnis @@ -92,7 +92,7 @@ Transfer directory - Transfer directory + Übertragungsverzeichnis diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index 0ee44826f8..631abe006a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -5994,20 +5994,20 @@ Do you want to continue? Cap referència seleccionat - + Face Cara - + Edge Vora - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 59cc28ca50..da835842fd 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -6000,20 +6000,20 @@ Chcete pokračovat? Není vybrána reference - + Face Plocha - + Edge Hrana - + Vertex Vrchol diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.qm b/src/Mod/Part/Gui/Resources/translations/Part_de.qm index 5386479a09..f8aebce6a9 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_de.qm and b/src/Mod/Part/Gui/Resources/translations/Part_de.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 14f7d3a12f..0fc507290a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -1037,22 +1037,22 @@ No object named {} - No object named {} + Kein Objekt namens {} Failed to parse link (more than one colon encountered) - Failed to parse link (more than one colon encountered) + Fehler beim Parsen des Links (mehr als ein Doppelpunkt gefunden) Object {} is neither movable nor attachable, can't edit attachment - Object {} is neither movable nor attachable, can't edit attachment + Objekt {} ist weder beweglich noch anhängbar; Anhang kann nicht bearbeitet werden {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. - {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + {} kann nicht angehängt werden. Sie können den Anhangseditor weiterhin zum Ausrichten des Objekts verwenden, der Anhang wird jedoch nicht parametrisch sein. @@ -1069,27 +1069,27 @@ Edit attachment of {} - Edit attachment of {} + Anhang von {} bearbeiten Ignored. Can't attach object to itself! - Ignored. Can't attach object to itself! + Ignoriert. Kann Objekt nicht an sich selbst anhängen! {} depends on object being attached, can't use it for attachment - {} depends on object being attached, can't use it for attachment + {} hängt vom Objekt das angehängt werden soll ab, es kann nicht als Anhag verwendet werden {} (add {}) - {} (add {}) + {} ({} hinzufügen) {} (add more references) - {} (add more references) + {} (fügen Sie weitere Referenzen hinzu) @@ -1099,7 +1099,7 @@ Reference{} - Reference{} + Referenz{} @@ -1109,7 +1109,7 @@ Failed to resolve links. {} - Failed to resolve links. {} + Fehler beim Auflösen von Links. {} @@ -1119,12 +1119,12 @@ Attached with mode {} - Attached with mode {} + Angehängt mit Modus {} Error: {} - Error: {} + Fehler: {} @@ -2848,8 +2848,8 @@ Hinweis: Die Positionierung wird im lokalen Raum des angehängten Objekts darges Length to extrude along direction (can be negative). If both lengths are zero, magnitude of direction is used. - Length to extrude along direction (can be negative). -If both lengths are zero, magnitude of direction is used. + Länge zum Extrudieren entlang der Richtung (kann negativ sein). +Wenn beide Längen Null sind, wird die Länge der Richtung verwendet. @@ -2859,7 +2859,7 @@ If both lengths are zero, magnitude of direction is used. Length to extrude against the direction (can be negative). - Length to extrude against the direction (can be negative). + Länge zum Extrudieren gegen die Richtung (kann negativ sein). @@ -2904,7 +2904,7 @@ If both lengths are zero, magnitude of direction is used. Select shape(s) that should be extruded - Select shape(s) that should be extruded + Wählen Sie die Form(en), die extrudiert werden soll @@ -3049,7 +3049,7 @@ If both lengths are zero, magnitude of direction is used. Chamfer Parameter - Fasen parameter + Parameter der Fase @@ -4673,9 +4673,9 @@ der Normalenvektor der Skizze verwendet If checked, the color and transparency will be taken from the cut objects. Works only if all objects have the same values. - If checked, the color and transparency -will be taken from the cut objects. -Works only if all objects have the same values. + Wenn aktiviert, werden Farbe und Transparenz +von den Beschnittobjekten übernommen. +Funktioniert nur, wenn alle Objekte die gleichen Werte haben. @@ -4717,12 +4717,12 @@ nur die erstellten Schnitte sichtbar Keep only cuts visible when closing - Keep only cuts visible when closing + Schnitte nur beim Schließen sichtbar lassen Sliders are disabled for assemblies - Sliders are disabled for assemblies + Schieberegler sind für Baugruppen deaktiviert @@ -4801,12 +4801,12 @@ nur die erstellten Schnitte sichtbar Shape from mesh - Shape from mesh + Form aus Netz Sew shape - Sew shape + Form nähen @@ -4844,7 +4844,7 @@ nur die erstellten Schnitte sichtbar Select one or more edges from a single object. - Select one or more edges from a single object. + Wählen Sie eine oder mehrere Kanten eines einzelnen Objekts aus. @@ -5608,12 +5608,12 @@ für Kollisions- oder Distanzfilterung. Computing the result failed with an error: - Computing the result failed with an error: + Das Berechnen des Ergebnisses ist fehlgeschlagen: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Klicken Sie auf 'Weiter', um die Funktion trotzdem zu erstellen, oder 'Abbrechen' um abzubrechen. @@ -5741,12 +5741,12 @@ Es wird einen 'Compound-Filter' für jede Form erzeugen. Computing the result failed with an error: - Computing the result failed with an error: + Das Berechnen des Ergebnisses ist fehlgeschlagen: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Klicken Sie auf 'Weiter', um die Funktion trotzdem zu erstellen, oder 'Abbrechen' um abzubrechen. @@ -5792,14 +5792,14 @@ Es wird einen 'Compound-Filter' für jede Form erzeugen. Computing the result failed with an error: - Computing the result failed with an error: + Das Berechnen des Ergebnisses ist fehlgeschlagen: Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Klicken Sie auf 'Weiter', um die Funktion trotzdem zu erstellen, oder 'Abbrechen' um abzubrechen. @@ -5988,20 +5988,20 @@ Do you want to continue? Keine ausgewählten Referenzen - + Face Fläche - + Edge Kante - + Vertex Knoten @@ -6419,7 +6419,7 @@ Do you want to continue? Create a copy - Create a copy + Kopie erstellen diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 339ec3c2cd..9b8b990d69 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -6003,20 +6003,20 @@ Do you want to continue? Δεν επιλέχθηκε κανένα αντικείμενο αναφοράς - + Face Όψη - + Edge Ακμή - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts index 38eae7cbff..8bb36e9c13 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts @@ -5997,20 +5997,20 @@ Do you want to continue? Ninguna referencia seleccionada - + Face Cara - + Edge Arista - + Vertex Vértice diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index b846bb223b..29cdb7ebc0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -5994,20 +5994,20 @@ Do you want to continue? Ninguna referencia seleccionada - + Face Cara - + Edge Arista - + Vertex Vértice diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm index 18051813cd..123ccad984 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_eu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_eu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index fc7e4f4e2d..98d0781be5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -1084,12 +1084,12 @@ {} (add {}) - {} (add {}) + {} (gehitu {}) {} (add more references) - {} (add more references) + {} (gehitu erreferentzia gehiago) @@ -1124,7 +1124,7 @@ Error: {} - Error: {} + Errorea: {} @@ -5997,20 +5997,20 @@ Do you want to continue? Ez da erreferentziarik hautatu - + Face Aurpegia - + Edge Ertza - + Vertex Erpina @@ -6428,7 +6428,7 @@ Do you want to continue? Create a copy - Create a copy + Sortu kopia bat diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 60f8937173..f66af17916 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -6003,20 +6003,20 @@ Haluatko jatkaa? Ei viittausta valittuna - + Face Tahko - + Edge Reuna - + Vertex Kärkipiste diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts index f1e469e482..3cd407b82f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts @@ -5999,20 +5999,20 @@ Do you want to continue? Walang reference na pinili - + Face Face - + Edge Gilid - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm index b6b1b844e4..f9f3bfe095 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 6ec3ddd938..b1cef4e43f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -1037,7 +1037,7 @@ No object named {} - No object named {} + Aucun objet nommé {} @@ -1047,12 +1047,12 @@ Object {} is neither movable nor attachable, can't edit attachment - Object {} is neither movable nor attachable, can't edit attachment + L'objet {} n'est ni déplaçable ni ancrable, impossible de modifier l'ancrage {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. - {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + {} n'est pas ancrable. Vous pouvez toujours utiliser la boîte de dialogue d'édition de l'ancre pour aligner l'objet, mais l'ancrage ne sera pas paramétrique. @@ -1069,7 +1069,7 @@ Edit attachment of {} - Edit attachment of {} + Modifier l'ancrage de {} @@ -1079,17 +1079,17 @@ {} depends on object being attached, can't use it for attachment - {} depends on object being attached, can't use it for attachment + {} dépend de l'objet en train d'être ancré, impossible de l'utiliser comme ancrage {} (add {}) - {} (add {}) + {} (ajouter {}) {} (add more references) - {} (add more references) + {} (ajouter plus de références) @@ -1099,7 +1099,7 @@ Reference{} - Reference{} + Référence{} @@ -1109,7 +1109,7 @@ Failed to resolve links. {} - Failed to resolve links. {} + Échec de la résolution du lien. {} @@ -1119,12 +1119,12 @@ Attached with mode {} - Attached with mode {} + Ancré avec le mode {} Error: {} - Error: {} + Erreur: {} @@ -3050,7 +3050,7 @@ Si les deux longueurs sont nulles, la grandeur de la direction est utilisée. Chamfer Parameter - Chamfer Parameter + Paramètre du Chanfrein @@ -4672,9 +4672,9 @@ le vecteur normal du plan de l'esquisse sera utilisé If checked, the color and transparency will be taken from the cut objects. Works only if all objects have the same values. - If checked, the color and transparency -will be taken from the cut objects. -Works only if all objects have the same values. + Si coché, la couleur et la transparence +vont être prises sur les objets coupés. +Marche uniquement si tous les objets ont les mêmes valeurs. @@ -5610,12 +5610,12 @@ pour le filtrage des collisions ou des distances. Computing the result failed with an error: - Computing the result failed with an error: + Le traitement du résultat a échoué avec une erreur : Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Cliquez sur 'Continuer' pour tout de même créer la fonctionnalité, or sur 'Abandonner' pour annuler. @@ -5743,12 +5743,12 @@ Cela créera un "filtre composé" pour chaque forme. Computing the result failed with an error: - Computing the result failed with an error: + Le traitement du résultat a échoué avec une erreur : Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Cliquez sur 'Continuer' pour tout de même créer la fonctionnalité, or sur 'Abandonner' pour annuler. @@ -5794,14 +5794,14 @@ Cela créera un "filtre composé" pour chaque forme. Computing the result failed with an error: - Computing the result failed with an error: + Le traitement du résultat a échoué avec une erreur : Click 'Continue' to create the feature anyway, or 'Abort' to cancel. - Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + Cliquez sur 'Continuer' pour tout de même créer la fonctionnalité, or sur 'Abandonner' pour annuler. @@ -5990,20 +5990,20 @@ Voulez-vous continuer ? Aucune référence sélectionnée - + Face Face - + Edge Arête - + Vertex Sommet @@ -6421,7 +6421,7 @@ Voulez-vous continuer ? Create a copy - Create a copy + Créer une copie diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 368ebcc5ee..9729c3ce8c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -5993,20 +5993,20 @@ Do you want to continue? Ningunha referencia escolmada - + Face Face - + Edge Bordo - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 00f4c5226e..a6eac473b3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -6012,20 +6012,20 @@ Do you want to continue? Referenca još nije postavljena - + Face Površina - + Edge Rub - + Vertex Vrh diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 09077321bf..47c01e6ce2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -5997,20 +5997,20 @@ Do you want to continue? Nincs kijelölt hivatkozás - + Face Felület - + Edge Él - + Vertex Végpont diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index 48f692dcce..f0117d51a8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -6111,20 +6111,20 @@ Do you want to continue? Tidak ada referensi yang dipilih - + Face Menghadapi - + Edge Tepi - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 2c13b00f48..9a3f4f1d0f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -5996,20 +5996,20 @@ Do you want to continue? Nessun riferimento selezionato - + Face Faccia - + Edge Bordo - + Vertex Vertice diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 012ce28429..64be1d18c7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -5990,20 +5990,20 @@ Do you want to continue? 参照が選択されていません。 - + Face 面 - + Edge エッジ - + Vertex 頂点 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts index 632d299be2..b997653fa0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts @@ -5995,20 +5995,20 @@ Do you want to continue? მიბმა არჩეული არაა - + Face სიბრტყე - + Edge წიბო - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index 366f7a0cef..934e9806fb 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -6002,20 +6002,20 @@ Ar vistiek norite tęsti? No reference selected - + Face Siena - + Edge Kraštas - + Vertex Viršūnė diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index 3b88837759..bf4bd3f5fc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -6002,20 +6002,20 @@ Wilt u doorgaan? Geen referentie geselecteerd - + Face Vlak - + Edge Rand - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index 0cba7c52e4..77d2bff0f4 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 97b9f9577d..5f07982d4b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -3005,7 +3005,7 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Selection - Zaznaczanie + Zaznaczenie @@ -5998,20 +5998,20 @@ Do you want to continue? Nie wybrano odniesienia - + Face Ściana - + Edge Krawędź - + Vertex Wierzchołek diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 0bf95cfb70..a8fe01ebc4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -5980,20 +5980,20 @@ Deseja continuar? Nenhuma referência selecionada - + Face Face - + Edge Aresta - + Vertex Vértice diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 301436a225..0c0eb2b511 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -5993,20 +5993,20 @@ Do you want to continue? Nenhuma referência selecionada - + Face Face - + Edge Borda - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 6f02e37ee9..8536996abe 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -5998,20 +5998,20 @@ Do you want to continue? Nicio referință selecționată - + Face Faţă - + Edge Margine - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 804abf16bc..50b0e6a176 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -5999,20 +5999,20 @@ Do you want to continue? Не выбрано ни одного ориентира - + Face Грань - + Edge Ребро - + Vertex Вершина diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 3ea9341559..700b54cf8f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -6003,20 +6003,20 @@ Ali želite nadaljevati? Noben sklic ni izbran - + Face Ploskev - + Edge Rob - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 35d206ca74..0cbd4a231b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -6001,20 +6001,20 @@ Vill du fortsätta? Ingen referens markerad - + Face Yta - + Edge Kant - + Vertex Hörn diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index d57bdca569..145725f791 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -5977,20 +5977,20 @@ Devam etmek istiyor musun? Seçilen referans yok - + Face Yüz - + Edge Kenar - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index 11bec1dad1..334f6d3dbe 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -6002,20 +6002,20 @@ Do you want to continue? Не вибрано орієнтира - + Face Грань - + Edge Ребро - + Vertex Вершина diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index 027187795f..5255529f1a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -5993,20 +5993,20 @@ Do you want to continue? No s'ha seleccionat cap referència. - + Face Cara - + Edge Aresta - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index 312892efe3..dcd5b006d3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -6003,20 +6003,20 @@ Bạn có muốn tiếp tục? Không có tài liệu tham khảo được chọn - + Face Mặt - + Edge Cạnh - + Vertex Vertex diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index 55773d6028..f5215fa773 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -5998,20 +5998,20 @@ Do you want to continue? 没有参照被选中 - + Face 面 - + Edge 边 - + Vertex 顶点 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index d80b0a1690..f90070e8c0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -6001,20 +6001,20 @@ Do you want to continue? 尚未選擇參考之物件 - + Face 面 - + Edge 邊 - + Vertex Vertex diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index be47cf6398..158dcfa3b7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -3544,28 +3544,28 @@ clica altre cop per finalitzar la selecció Si us plau, crear un plànol primer o seleccioneu una cara a esbossar - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3838,14 +3838,14 @@ Això pot portar a resultats inesperats. No és possible crear un pla Sustractiu sense una base pla disponible - + Vertical sketch axis Eix vertical de croquis - + Horizontal sketch axis Eix horitzontal de croquis @@ -3899,11 +3899,11 @@ Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funci Per utilitzar aquesta característica cal que pertanyen a un objecte de part del document. - - - + + + Edit %1 Editar %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index 287cb93901..6eb4b64198 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -3547,28 +3547,28 @@ click again to end selection Prosím vytvořte nejdříve rovinu nebo vyberte plochu pro náčrt - - - - + + + + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - - - - + + + + Do you want to close this dialog? Chcete zavřít tento dialog? @@ -3843,14 +3843,14 @@ To může vést k neočekávaným výsledkům. Není možné vytvořit odečtový prvek bez základního prvku - + Vertical sketch axis Svislá skicovací osa - + Horizontal sketch axis Vodorovná skicovací osa @@ -3904,11 +3904,11 @@ Pokud máte starší dokument s objekty PartDesignu bez Těla, použijte funkci Pro použití tohoto prvku je potřebné, aby patřil k objektu díl v dokumentu. - - - + + + Edit %1 Upravit %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index 485bac0cbe..078ea1a08b 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 68ad6ce10e..9a17694c02 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -3269,7 +3269,7 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Fillet parameters - Fillet parameters + Parameter der Rundung @@ -3543,28 +3543,28 @@ Nochmaliges Klicken beendet den Auswahl-Modus. Zum Erzeugen einer Skizze zuerst eine Ebene im Koordinatensystem oder auf einem Körper wählen - - - - + + + + A dialog is already open in the task panel Es ist bereits ein Dialog in der Aufgabenleiste geöffnet - - - - + + + + Do you want to close this dialog? Möchten Sie diesen Dialog zu schließen? @@ -3837,14 +3837,14 @@ This may lead to unexpected results. Es ist nicht möglich, ein abzuziehendes Objekt ohne ein Basisobjekt zu erstellen - + Vertical sketch axis Vertikale Skizzenachse - + Horizontal sketch axis Horizontale Skizzenachse @@ -3899,11 +3899,11 @@ Bitte aktivieren (Doppelklick) Sie einen oder erstellen einen neuen Körper.Um diese Funktion verwenden zu können, muss es Teil einer Baugruppe im Dokument sein. - - - + + + Edit %1 %1 bearbeiten diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index bb1135669c..1f4e276a0d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -3547,28 +3547,28 @@ click again to end selection Παρακαλώ δημιουργήστε πρώτα ένα επίπεδο ή επιλέξτε την όψη πάνω στην οποία θα δημιουργήσετε σκαρίφημα - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3843,14 +3843,14 @@ This may lead to unexpected results. Δεν είναι εφικτό να δημιουργήσετε αφαιρετικό χαρακτηριστικό χωρίς κάποιο διαθέσιμο χαρακτηριστικό βάσης - + Vertical sketch axis Κάθετος άξονας σκίτσου - + Horizontal sketch axis Οριζόντιος άξονας σκίτσου @@ -3904,11 +3904,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Προκειμένου να χρησιμοποιήσετε αυτό το χαρακτηριστικό θα πρέπει να ανήκει σε κάποιο εξάρτημα που βρίσκεται στο έγγραφο. - - - + + + Edit %1 Επεξεργασία του %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.qm index 4947604671..9624ddc74d 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts index 647f5d4f96..ab7c127cef 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts @@ -3272,7 +3272,7 @@ haga clic de nuevo para finalizar la selección Fillet parameters - Fillet parameters + Parámetro de redondeo @@ -3546,28 +3546,28 @@ haga clic de nuevo para finalizar la selección Por favor, crea un plano primero o selecciona una cara para croquizar - - - - + + + + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - - + + + + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3842,14 +3842,14 @@ Esto puede conducir a resultados inesperados. No es posible crear una operación sustractiva sin una operación base disponible - + Vertical sketch axis Eje vertical del croquis - + Horizontal sketch axis Eje horizontal del croquis @@ -3903,11 +3903,11 @@ Si tienes un documento heredado con objetos DiseñoDePieza sin un Cuerpo, utiliz Para poder utilizar esta operación necesita pertenecer a un objeto de pieza en el documento. - - - + + + Edit %1 Editar %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm index 9c362c62b9..082a323032 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 88ef483d2a..0fc771191b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -3272,7 +3272,7 @@ haga clic de nuevo para finalizar la selección Fillet parameters - Fillet parameters + Parámetro de redondeo @@ -3546,28 +3546,28 @@ haga clic de nuevo para finalizar la selección Por favor, crea un plano primero o selecciona una cara para croquizar - - - - + + + + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - - - - + + + + Do you want to close this dialog? ¿Desea cerrar este diálogo? @@ -3838,14 +3838,14 @@ This may lead to unexpected results. No es posible crear una función de resta sin una base característica disponible - + Vertical sketch axis Eje vertical del croquis - + Horizontal sketch axis Eje horizontal del croquis @@ -3899,11 +3899,11 @@ Si tienes un documento heredado con objetos PartDesign sin un Cuerpo, utiliza la Para poder usar esta operación debe pertenecer a una pieza objeto en el documento. - - - + + + Edit %1 Editar %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index a8e51fe271..e5e58ac2d3 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -3547,28 +3547,28 @@ sakatu berriro hautapena amaitzeko Krokisa sortzeko, lehenengo sortu plano bat edo hautatu aurpegi bat - - - - + + + + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - - - - + + + + Do you want to close this dialog? Elkarrizketa-koadro hau itxi nahi duzu? @@ -3841,14 +3841,14 @@ Espero ez diren emaitzak gerta daitezke. Ezin da elementu kentzaile bat sortu oinarri-elementu bat erabilgarri ez badago - + Vertical sketch axis Krokisaren ardatz bertikala - + Horizontal sketch axis Krokisaren ardatz horizontala @@ -3902,11 +3902,11 @@ Bertsio zaharragoan dagoen dokumentu bat baduzu eta gorputzik gabeko PartDesign Ezaugarri hau erabili ahal izateko, dokumentuko pieza-objektu batekoa izan behar du. - - - + + + Edit %1 Editatu %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index 8632e99796..5a40b26381 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -3547,28 +3547,28 @@ click again to end selection Luo ensin taso tai valitse pinta jolle luonnos tehdään - - - - + + + + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - - - - + + + + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? @@ -3843,14 +3843,14 @@ Tämä voi johtaa odottamattomiin tuloksiin. Ei ole mahdollista tehdä leikkaavaa piirrettä ilman olemassaolevaa peruspiirrettä - + Vertical sketch axis Pystysuuntaisen luonnoksen akseli - + Horizontal sketch axis Vaakasuuntaisen luonnoksen akseli @@ -3904,11 +3904,11 @@ Jos asiakirja on vanhentunutta tyyppiä OsanSuunnittelu-objekteilla ilman kappal Jotta tätä piirrettä voitaisiin käyttää, sen pitäisi kuulua asiakirjaan sisältyvään osa-objektiin. - - - + + + Edit %1 Muokkaa %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts index a67c92039a..0c71d296c7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fil.ts @@ -3548,28 +3548,28 @@ click again to end selection Mangyaring lumikha muna ng plane o pumili ng face na iguhit - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3844,14 +3844,14 @@ Ito ay pwedeng humantong sa hindi inaasahang mga resulta. Hindi posible ang paglikha ng subtractive feature ng walang base feature na magagamit - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3905,11 +3905,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Para magamit ang feature na ito, kailangang mapabilang ito sa isang part object na nasa dokumento. - - - + + + Edit %1 Edit %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index d670884d8e..36ca7166d8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -3541,28 +3541,28 @@ click again to end selection Veuillez d'abord créer un plan, ou choisissez une face sur laquelle appliquer l'esquisse - - - - + + + + A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches - - - - + + + + Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? @@ -3831,14 +3831,14 @@ This may lead to unexpected results. Il n’est pas possible de créer une fonction soustractive sans une fonction de base présente - + Vertical sketch axis Axe d'esquisse vertical - + Horizontal sketch axis Axe d'esquisse horizontal @@ -3892,11 +3892,11 @@ Si vous avez un vieux document avec des objets PartDesign sans corps, utilisez l Afin d'utiliser cette fonction, elle doit appartenir à un objet pièce dans le document. - - - + + + Edit %1 Modifier %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts index 5a0b83afe4..61c24eed13 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts @@ -3547,28 +3547,28 @@ click again to end selection Por favor, crear un plano de primeiro ou escolmar unha cara na que esbozar - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3843,14 +3843,14 @@ Esto pode levar a resultados inexperados. Non é posíbel crear unha característica subtractiva sen un recurso base dispoñíbel - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3904,11 +3904,11 @@ Se tes un antigo documento con obxectos PartDesign sen Corpo, usa a función mig Para usar este recurso é preciso que pertenza a un obxecto peza no documento. - - - + + + Edit %1 Editar %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index b91d34970e..cdd58eacd6 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -3545,28 +3545,28 @@ kliknite ponovno za završetak odabira Molimo vas prvo stvorite ravninu ili odaberite lice za crtanje na - - - - + + + + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - - - - + + + + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? @@ -3843,14 +3843,14 @@ To može dovesti do neočekivanih rezultata. Nije moguće stvoriti dodavajući element bez pripadajućeg osnovnog elementa - + Vertical sketch axis Vertikalna os skice - + Horizontal sketch axis Horizontalna os skice @@ -3904,11 +3904,11 @@ Ako imate naslijeđeni dokument sa PartDesign objektom bez tijela koristite funk Da biste mogli koristiti ovu značajku ona mora pripadati objektu dio u dokumentu. - - - + + + Edit %1 Uređivanje %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 7549b20bb8..a6f6d536b0 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -3539,28 +3539,28 @@ click again to end selection Kérem, először hozzon létre egy síkot vagy válasszon egy felületet amin vázlatot készít - - - - + + + + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - - - - + + + + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? @@ -3833,14 +3833,14 @@ Ez nem várt eredményekhez vezethet. Nincs lehetőség kivonandó funkció létrehozására az alap funkció nélkül - + Vertical sketch axis Vázlat függőleges tengelye - + Horizontal sketch axis Vázlat vízszintes tengelye @@ -3894,11 +3894,11 @@ Ha van egy örökölt dokumentum AlkatrészTervezés objektummal Test nélkül, Funkció használatához szükséges, hogy az egy alkatrész objektumhoz tartozzon a dokumentumban. - - - + + + Edit %1 %1 szerkesztése diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts index 805ed516b5..4d4333c70d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_id.ts @@ -3547,28 +3547,28 @@ klik lagi untuk mengakhiri seleksi Silakan membuat pesawat terlebih dahulu atau pilih muka untuk membuat sketsa - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3843,14 +3843,14 @@ Hal ini dapat menyebabkan hasil yang tidak diharapkan. Tidak mungkin membuat fitur subtraktif tanpa fitur dasar yang tersedia - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3904,11 +3904,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Untuk menggunakan fitur ini, perlu disertakan bagian objek dalam dokumen. - - - + + + Edit %1 Edit %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index bd2eab6e99..083dbb8f43 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 870f954fe3..7f7edcfa49 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -3281,7 +3281,7 @@ fare nuovamente clic per terminare la selezione LinearPattern parameters - LinearPattern parameters + Parametri SerieLineare @@ -3297,7 +3297,7 @@ fare nuovamente clic per terminare la selezione PolarPattern parameters - PolarPattern parameters + Parametri SeriePolare @@ -3547,28 +3547,28 @@ fare nuovamente clic per terminare la selezione Si prega di creare prima un piano oppure di selezionare una faccia su cui posizionare lo schizzo - - - - + + + + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - - - - + + + + Do you want to close this dialog? Si desidera chiudere questa finestra? @@ -3837,14 +3837,14 @@ This may lead to unexpected results. Non è possibile creare una funzione sottrattiva senza una funzione di base disponibile - + Vertical sketch axis Asse verticale dello schizzo - + Horizontal sketch axis Asse orizzontale dello schizzo @@ -3896,11 +3896,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Per poter utilizzare questa funzione essa deve appartenere a un oggetto parte del documento. - - - + + + Edit %1 Edita %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index a98762555a..4cd1f043c9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -3542,28 +3542,28 @@ click again to end selection まず平面を作成するか、またはスケッチを描く面を選択してください。 - - - - + + + + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - - - - + + + + Do you want to close this dialog? このダイアログを閉じますか？ @@ -3834,14 +3834,14 @@ This may lead to unexpected results. 利用可能なベースフィーチャーがない場合、減算フィーチャーは作成できません。 - + Vertical sketch axis 垂直スケッチ軸 - + Horizontal sketch axis 水平スケッチ軸 @@ -3895,11 +3895,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr このフィーチャーを使用するためにはそれがドキュメント内のパーツオブジェクトに属している必要があります。 - - - + + + Edit %1 %1を編集 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts index 812a679e9a..c38b6be8da 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts @@ -3546,28 +3546,28 @@ click again to end selection ჯერ საჭიროა სიბრტყის შექმნა ან სახაზავი ზედაპირის არჩევა - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3842,14 +3842,14 @@ This may lead to unexpected results. საბაზისო ელემემენტის გარეშე გამოკლებადი თვისების შექმნა შეუძლებელია - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3903,11 +3903,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr ამ თვისების გამოსაყენებლად ის დოკუმენტში ნაწლის ობიექტს უნდა ეკუთვნოდეს. - - - + + + Edit %1 ჩასწორება %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts index a8f3b44fc7..35c4ddd9a2 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_lt.ts @@ -3547,28 +3547,28 @@ spustelėkite vėl, jei norite baigti atranką Please create a plane first or select a face to sketch on - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3843,14 +3843,14 @@ This may lead to unexpected results. Neįmanoma sukurti atimančio kūno nesant pagrindinio - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3904,11 +3904,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr In order to use this feature it needs to belong to a part object in the document. - - - + + + Edit %1 Edit %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 2f689bc1f0..32f6a6d5c0 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -3545,28 +3545,28 @@ klik nogmaals om de selectie te beëindigen Maak eerst een werk-vlak of selecteer een zijde om op te schetsen - - - - + + + + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - - - - + + + + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? @@ -3841,14 +3841,14 @@ Dit kan tot onverwachte resultaten leiden. Het is niet mogelijk om een aftrekkende functie maken zonder dat een basis functie beschikbaar is - + Vertical sketch axis Verticale schetsas - + Horizontal sketch axis Horizontale schetsas @@ -3902,11 +3902,11 @@ Als u een ouder document met PartDesign objecten zonder een lichaam hebt, gebrui Om deze functie te gebruiken moet deze tot een onderdeel object behoren in het document. - - - + + + Edit %1 Bewerken %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index d979b8dc3a..37cb887ef5 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -3545,28 +3545,28 @@ kliknij ponownie, aby zakończyć wybór Proszę stworzyć najpierw płaszczyznę lub wybrać ścianę dla umieszczenia szkicu - - - - + + + + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - - - - + + + + Do you want to close this dialog? Czy chcesz zamknąć to okno? @@ -3841,14 +3841,14 @@ Może to prowadzić do nieoczekiwanych rezultatów. Nie jest możliwe utworzenie elementu do odjęcia bez dostępnego elementu bazowego - + Vertical sketch axis Pionowa oś szkicu - + Horizontal sketch axis Pozioma oś szkicu @@ -3902,11 +3902,11 @@ Jeśli masz starszy dokument z obiektami Projektu części bez obiektu Zawartoś Ta cecha musi przynależeć do obiektu części w danym dokumencie, by można ją było wykorzystać. - - - + + + Edit %1 Edytuj %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index 6075e516a2..7d956a7091 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -3542,28 +3542,28 @@ clique novamente para terminar a seleção Por favor, crie um plano primeiro ou selecione uma face onde desenhar - - - - + + + + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - - - - + + + + Do you want to close this dialog? Deseja fechar este diálogo? @@ -3834,14 +3834,14 @@ This may lead to unexpected results. Não é possível criar um objeto subtrativo sem um objeto base disponível - + Vertical sketch axis Eixo vertical do esboço - + Horizontal sketch axis Eixo horizontal do esboço @@ -3895,11 +3895,11 @@ Se você tiver um documento antigo com objetos do PartDesign sem corpo, use a fu Para utilizar este objeto ele precisa pertencer a uma peça do documento. - - - + + + Edit %1 Editar %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts index 463e32e6dd..452475ea0c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts @@ -3547,28 +3547,28 @@ clique novamente para terminar a seleção Por favor, crie um plano primeiro ou selecione uma face onde desenhar - - - - + + + + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - - - - + + + + Do you want to close this dialog? Deseja fechar esta janela? @@ -3839,14 +3839,14 @@ This may lead to unexpected results. Não é possível criar um objeto subtrativo sem um objeto base disponível - + Vertical sketch axis Eixo vertical de esboço - + Horizontal sketch axis Eixo horizontal de esboço @@ -3898,11 +3898,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Para utilizar este objeto ele precisa de pertencer a uma peça do documento. - - - + + + Edit %1 Edite %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 4ca349e228..51f17e34db 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -3549,28 +3549,28 @@ click again to end selection Vă rugăm să creaţi mai întâi un plan, sau selectează o faţă pe care se aplică schiţa - - - - + + + + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - - - - + + + + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? @@ -3841,14 +3841,14 @@ This may lead to unexpected results. Nu este posibil să se creeze o funcție substractivă fără prezența unei funcții de bază - + Vertical sketch axis Axa verticală a schiţei - + Horizontal sketch axis Axa orizontală a schiţei @@ -3902,11 +3902,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Pentru a utiliza această funcție, ea trebuie să aparțină unei piese din document. - - - + + + Edit %1 Editare %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 41031651f3..6af47e30f5 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -3547,28 +3547,28 @@ click again to end selection Пожалуйста, сначала создайте плоскость или выберите грань - - - - + + + + A dialog is already open in the task panel Диалог уже открыт в панели задач - - - - + + + + Do you want to close this dialog? Вы хотите закрыть этот диалог? @@ -3843,14 +3843,14 @@ This may lead to unexpected results. Невозможно создать субтрактивный элемент без базового элемента - + Vertical sketch axis Вертикальная ось эскиза - + Horizontal sketch axis Горизонтальная ось эскиза @@ -3904,11 +3904,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Для того, чтобы использовать этот элемент, он должен являться объектом типа деталь в документе. - - - + + + Edit %1 Редактировать %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 65a191bf87..2644cac816 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -3544,28 +3544,28 @@ s ponovnim klikom pa zaključite izbiranje Ustvarite najprej ravnino ali izberite ploskev, na katero želite očrtavati - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3840,14 +3840,14 @@ To lahko pripelje do nepričakovanih rezultatov. Značilke odvzemanja ni mogoče ustvariti, če osnovna značilnost ni na voljo - + Vertical sketch axis Navpična os skice - + Horizontal sketch axis Vodoravna os skice @@ -3901,11 +3901,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Če želite uporabiti to značilnost, mora pripradati delu v dokumentu. - - - + + + Edit %1 Uredi %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index b7bd310936..73552f7ba4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -3547,28 +3547,28 @@ click again to end selection Vänligen skapa ett plan först eller välj en yta att skissa på - - - - + + + + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - - - - + + + + Do you want to close this dialog? Vill du stänga denna dialogruta? @@ -3839,14 +3839,14 @@ This may lead to unexpected results. Det går inte att skapa en subtraktiv funktion utan en tillgänglig basfunktion - + Vertical sketch axis Vertikal skissaxel - + Horizontal sketch axis Horisontell skissaxel @@ -3900,11 +3900,11 @@ Om du har ett utdaterat dokument med Part Design-objekt utan kropp, använd migr För att kunna använda denna funktion måste den tillhöra en del i dokumentet. - - - + + + Edit %1 Redigera %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index bac8d7afe2..c118a43167 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -3547,28 +3547,28 @@ seçimi bitirmek için tekrar basın Lütfen önce bir düzlem oluşturun ya da bir eskiz yüzeyi seçin - - - - + + + + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - - - - + + + + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? @@ -3843,14 +3843,14 @@ Bu, beklenmedik sonuçlara neden olabilir. Mevcut bir temel özellik olmadan bir çıkarılabilir özellik oluşturmak mümkün değildir - + Vertical sketch axis Dikey taslak ekseni - + Horizontal sketch axis Yatay taslak ekseni @@ -3904,11 +3904,11 @@ Gövdeye sahip olmayan nesneler içeren eski bir belgeniz varsa, bunları bir g Bu özelliği kullanmak için belgedeki bir parçaya ait olması gerekir. - - - + + + Edit %1 %1'i düzenle diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index ffd2a202a8..7bcd5074bb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -3546,28 +3546,28 @@ click again to end selection Будь ласка, спочатку створіть або виберіть грань для розміщення ескізу - - - - + + + + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - - - - + + + + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? @@ -3842,14 +3842,14 @@ This may lead to unexpected results. Неможливо створити субтрактивний елемент без базового елементу - + Vertical sketch axis Вертикальна вісь ескізу - + Horizontal sketch axis Горизонтальна вісь ескізу @@ -3903,11 +3903,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr Щоб використовувати цю функцію, вона повина належати обʼєкту Деталь в документі. - - - + + + Edit %1 Редагувати %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts index ba5f26785c..f300a68e72 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts @@ -3547,28 +3547,28 @@ click again to end selection Creeu primer un pla o seleccioneu una cara a esbossar - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3841,14 +3841,14 @@ Això pot portar a resultats inesperats. No és possible crear una funció subtractiva sense una funció de base disponible. - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3902,11 +3902,11 @@ Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funci Per a utilitzar aquesta característica ha de pertànyer a un objecte peça del document. - - - + + + Edit %1 Edita %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts index a7eb658ce0..853b706b37 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_vi.ts @@ -3547,28 +3547,28 @@ click again to end selection Hãy tạo một mặt phẳng trước hoặc chọn một mặt để vẽ phác họa trên đó - - - - + + + + A dialog is already open in the task panel A dialog is already open in the task panel - - - - + + + + Do you want to close this dialog? Do you want to close this dialog? @@ -3843,14 +3843,14 @@ This may lead to unexpected results. Không thể tạo đối tượng khuyết mà không có một đối tượng cơ bản - + Vertical sketch axis Vertical sketch axis - + Horizontal sketch axis Horizontal sketch axis @@ -3904,11 +3904,11 @@ Nếu bạn có một tài liệu cũ với các đối tượng PartDesign khô Để sử dụng đối tượng này, nó cần phải thuộc về một đối tượng phần trong tài liệu. - - - + + + Edit %1 Chỉnh sửa %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index 4e7b6319ba..d2220d3bea 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -3545,28 +3545,28 @@ click again to end selection 请先创建一个平面或选择一个平面用于画草图 - - - - + + + + A dialog is already open in the task panel 一个对话框已在任务面板打开 - - - - + + + + Do you want to close this dialog? 您要关闭此对话框吗? @@ -3841,14 +3841,14 @@ This may lead to unexpected results. 如果没有可用的基础特征, 就不可能创建减料特征 - + Vertical sketch axis 垂直草绘轴 - + Horizontal sketch axis 水平草绘轴 @@ -3902,11 +3902,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr 要使用此特征, 它需隶属于文档中的零件对象。 - - - + + + Edit %1 编辑 %1 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index b9ebb903cb..4d2eb10481 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -3536,28 +3536,28 @@ click again to end selection 請先創建一個平面或選擇要在其上繪製草圖的面 - - - - + + + + A dialog is already open in the task panel 於工作面板已開啟對話窗 - - - - + + + + Do you want to close this dialog? 您確定要關閉此對話窗嗎? @@ -3830,14 +3830,14 @@ This may lead to unexpected results. 如果沒有可用的基本特徵，則無法創建除料特徵 - + Vertical sketch axis 垂直草圖軸 - + Horizontal sketch axis 水平草圖軸 @@ -3891,11 +3891,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr 為了使用此特徵，它需要屬於文件中的一個零件物件。 - - - + + + Edit %1 編輯 %1 diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index a10f81c3fc..aff85993a7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify El camí de base que es modifica @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distància màxima abans que es trunque la unió en biaix - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Marqueu «fals», per a evitar l'operació de generació de codi @@ -167,8 +167,8 @@ Posició de base per a aquesta operació - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ El punt d'inici d'aquest camí - - + + Make True, if specifying a Start Point Marqueu «cert», si s'especifica un punt final @@ -367,44 +367,44 @@ Fins on s’amplia la profunditat de la perforació - + Width of tags. Amplària de les etiquetes - + Height of tags. Alçària de les etiquetes - + Angle of tag plunge and ascent. Angle de l'etiqueta durant la penetració i ascens - + Radius of the fillet for the tag. Radi d'arredoniment per a l'etiqueta - + Locations of inserted holding tags Posicions de les etiquetes de subjecció inserides - + IDs of disabled holding tags ID de les etiquetes de subjecció inhabilitades - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Utilitza el contorn de la geometria de base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Avanç en percentatge del diàmetre de l'eina de tall en cada passada @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objectes de base addicionals per a gravar @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Forma @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Afegeix @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Elimina @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Neteja @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Controlador d'eina - + Coolant Refrigerant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Atura - - + + Direction Direcció @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operació @@ -4036,8 +4036,8 @@ For example: No ho mostris mai més - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Perfila el model sencer, les cares seleccionades o bé les arestes seleccionades - + Edit Edita @@ -4179,8 +4179,8 @@ For example: L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina - + %s is not a Base Model object of the job %s %s no és un objecte de Model base del treball %s @@ -4737,14 +4737,14 @@ Avortant la creació d'op Miter - + Outside Outside - + Inside Inside @@ -5145,22 +5145,22 @@ Avortant la creació d'op Path_Dressup - + Please select one path object Seleccioneu un objecte de tipus camí - + The selected object is not a path L'objecte seleccionat no és un camí - + Please select a Path object Seleccioneu un objecte camí @@ -5481,14 +5481,14 @@ Avortant la creació d'op El camí base és buit. - + The selected object is not a path L'objecte seleccionat no és un camí - + Please select a Profile object Seleccioneu un objecte perfil @@ -6042,15 +6042,15 @@ Avortant la creació d'op Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Perfila el model sencer, les cares seleccionades o bé les arestes seleccionades @@ -7064,8 +7064,8 @@ Avortant la creació d'op Dogbones - + Dressup Disfressar-se diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index 435ba0539c..de04249016 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Základní dráha pro úpravu @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximum distance before a miter join is truncated - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Natavte Nepravdu, aby operace negenerovala kód @@ -167,8 +167,8 @@ Base locations for this operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ The start point of this path - - + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -367,44 +367,44 @@ Prodloužení hloubky vrtání - + Width of tags. Width of tags. - + Height of tags. Height of tags. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Radius of the fillet for the tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Procento průměru nástroje kroku řezu při každém průchodu @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Návrh @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Přidat @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Odstranit @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Vyčistit @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Chladivo @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Stop - - + + Direction Směr @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operace @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profil celého modelu, vybrané plochy nebo vybrané hrany - + Edit Upravit @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profil celého modelu, vybrané plochy nebo vybrané hrany @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index 0861595930..bc9ad3026e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Zu ändernder Basispfad @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximale Entfernung, bevor Gehrungsverbindungen abgeschnitten werden - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Abwählen, damit die Aktion keinen Code generiert @@ -167,8 +167,8 @@ Ausgangspunkte für diese Operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Der Startpunkt dieses Pfades - - + + Make True, if specifying a Start Point Aktivieren, wenn ein Startpunkt angegeben werden soll @@ -367,44 +367,44 @@ Wie viel tiefer gebohrt wird - + Width of tags. Breite des Haltesteges. - + Height of tags. Höhe des Haltesteges. - + Angle of tag plunge and ascent. Winkel der Ein- und Ausfahrt bei Haltestegen. - + Radius of the fillet for the tag. Radius der Rundung des Haltestegs. - + Locations of inserted holding tags Positionen der eingefügten Haltestege - + IDs of disabled holding tags IDs von deaktivierten Haltestegen - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Benutzt die Kontur der Basisgeometrie. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Pfadüberlappung als Prozentsatz des Werkzeugdurchmessers @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Zusätzliche Basisobjekte, die graviert werden sollen @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Form @@ -2151,9 +2151,9 @@ <html><head/><body><p>Die ausgewählten Merkmale der Liste der Basisgeometrien dieser Operation hinzufügen.</p></body></html> - + Add Hinzufügen @@ -2163,10 +2163,10 @@ <html><head/><body><p>Die ausgewählten Listeneinträge von der Liste der Basisgeometrien entfernen. Die Operation wird auf diese nicht angewandt.</p></body></html> - - + + Remove Entfernen @@ -2176,8 +2176,8 @@ <html><head/><body><p>Löscht/Leert die Liste der Basisgeometrien.</p></body></html> - + Clear Löschen @@ -2268,53 +2268,53 @@ Alle Orte werden mit denselben Operationseigenschaften bearbeitet. - + Start Depth Starttiefe - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Starttiefe der Operation. Der höchste Punkt in der Z-Achse, den die Operation bearbeiten muss.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Den Z-Wert der ausgewählten Funktion als Starttiefe für die Operation übernehmen.</p></body></html> - - + + ... ... - + Final Depth Endtiefe - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Den Z-Wert der ausgewählten Funktion als Starttiefe für die Operation übernehmen.</p></body></html> - + Step Down Schritt runter @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Werkzeugsteuerung - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Das Werkzeug und seine Einstellungen, die für diesen Vorgang verwendet werden sollen.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Kühlmittelmodus @@ -2421,20 +2421,20 @@ G-Gode - - - - + + + + Tool Controller Werkzeugsteuerung - + Coolant Kühlmittel @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Überlappungs-Prozentsatz @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Kontur verwenden @@ -2561,10 +2561,10 @@ Beenden - - + + Direction Richtung @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Geben Sie an, ob dieser Vorgang einen Startpunkt verwendet.</p></body></html> - + Use Start Point Startpunkt verwenden @@ -3139,15 +3139,15 @@ - + Layer Mode Ebenenmodus - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Führe die Operation in einem Durchgang zur Tiefe aus, oder tastet sich in mehren Durchgängen an die Tiefe heran.</p></body></html> @@ -3473,8 +3473,8 @@ Gewindegänge pro Zoll (inch) - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Nicht mehr anzeigen - + Choose a Path Job Einen Path-Auftrag auswählen @@ -4142,8 +4142,8 @@ For example: Gesamtes Modell, ausgewählte Fläche(n) oder ausgewählte Kante(n) profilieren - + Edit Bearbeiten @@ -4179,8 +4179,8 @@ For example: Schneidkantenwinkel (%.2f) führt zu negativer Länge der Werkzeugspitze - + %s is not a Base Model object of the job %s %s ist kein Basismodellobjekt des Auftrags %s @@ -4737,14 +4737,14 @@ Abbruch der OP-Erstellung Gehrung - + Outside Außen - + Inside Innen @@ -5145,24 +5145,24 @@ Abbruch der OP-Erstellung Path_Dressup - + Please select one path object Bitte einen einzelnen Pfad auswählen - + The selected object is not a path Das ausgewählte Objekt ist kein Pfad - + Please select a Path object Bitte wählen Sie ein Pfad-Objekt aus @@ -5483,14 +5483,14 @@ Abbruch der OP-Erstellung Basispfad ist leer. - + The selected object is not a path Das ausgewählte Objekt ist kein Pfad - + Please select a Profile object Bitte wählen Sie ein Profilobjekt @@ -6044,15 +6044,15 @@ Abbruch der OP-Erstellung Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Gesamtes Modell, ausgewählte Fläche(n) oder ausgewählte Kante(n) profilieren @@ -7066,8 +7066,8 @@ Abbruch der OP-Erstellung Hundeknochen - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index b1ac82d689..a64585a88d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Η διαδρομή βάσης προς τροποποίηση @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Η μέγιστη απόσταση πριν περικοπεί μια λοξοτομή - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα @@ -167,8 +167,8 @@ Οι τοποθεσίες βάσης για αυτήν την λειτουργία - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Το σημείο εκκίνησης αυτής της διαδρομής - - + + Make True, if specifying a Start Point Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Πλάτος των προσαρτήσεων. - + Height of tags. Ύψος των προσαρτήσεων. - + Angle of tag plunge and ascent. Γωνία βύθισης και ανύψωσης προσάρτησης. - + Radius of the fillet for the tag. Ακτίνα του στρογγυλέματος για την προσάρτηση. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Μορφή @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Προσθήκη @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Αφαίρεση @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Εκκαθάριση @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Διακοπή - - + + Direction Κατεύθυνση @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Επεξεργασία @@ -4179,8 +4179,8 @@ For example: Η Γωνία Περικοπής Ακμής (%.2f) θα έχει ως αποτέλεσμα αρνητικό μήκος άκρου εργαλείου - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής - + The selected object is not a path Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - + Please select a Path object Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής @@ -5483,14 +5483,14 @@ Aborting op creation Η Διαδρομή βάσης είναι κενή. - + The selected object is not a path Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - + Please select a Profile object Παρακαλώ επιλέξτε ένα αντικείμενο προφίλ @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Προφίλ - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts index fda0f886f0..d86fd980ee 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify La trayectoria base a modificar @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distancia máxima antes de que una Unión de inglete este truncada - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Hacer falso, para evitar la operación generación de código @@ -167,8 +167,8 @@ Puntos base para esta operación - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Punto de partida de esta trayectoria - - + + Make True, if specifying a Start Point Hacer verdadero, sí especifica un punto inicial @@ -367,44 +367,44 @@ Cómo de lejos se extiende la profundidad del taladro - + Width of tags. Anchura de las etiquetas. - + Height of tags. Altura de las etiquetas. - + Angle of tag plunge and ascent. Ángulo de etiqueta penetración y ascenso. - + Radius of the fillet for the tag. Radio del redondeo de la etiqueta. - + Locations of inserted holding tags Ubicaciones de las etiquetas de sujeción insertadas - + IDs of disabled holding tags ID de etiquetas de retención deshabilitadas - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Utiliza el contorno de la geometría de base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objetos base adicionales para ser grabados @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Forma @@ -2151,9 +2151,9 @@ <html><head/><body><p>Añadir características seleccionadas a la lista de geometrías base para esta operación.</p></body></html> - + Add Agregar @@ -2163,10 +2163,10 @@ <html><head/><body><p>Eliminar los elementos de la lista seleccionada de la lista de geometrías base. La operación no se aplicará a ellos.</p></body></html> - - + + Remove Eliminar @@ -2176,8 +2176,8 @@ <html><head/><body><p>Limpia lista de geometrías base.</p></body></html> - + Clear Limpiar @@ -2268,53 +2268,53 @@ Todas las ubicaciones serán procesadas usando las mismas propiedades de operación. - + Start Depth Profundidad de Inicio - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Profundidad de Inicio de la operación. El punto más alto en el eje Z que la operación debe procesar.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transferir el valor Z de la característica seleccionada como la Profundidad de Inicio para la operación.</p></body></html> - - + + ... ... - + Final Depth Profundidad Final - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>La profundidad de la operación que corresponde al valor más bajo del eje Z que la operación debe procesar.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transferir el valor Z de la característica seleccionada como la Profundidad Final de la operación.</p></body></html> - + Step Down Bajar @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ControladorDeHerramientas - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>La herramienta y sus ajustes para esta operación.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Modo Refrigerante @@ -2421,20 +2421,20 @@ G-Code - - - - + + + + Tool Controller Controlador de herramienta - + Coolant Refrigerante @@ -2459,8 +2459,8 @@ <html><head/><body><p>Tipo de operación adaptativa</p></body></html> - + Step Over Percent Porcentaje de Paso @@ -2550,8 +2550,8 @@ Finalizando perfil - + Use Outline Usar Contorno @@ -2561,10 +2561,10 @@ Parar - - + + Direction Sentido @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>La cantidad por la cual la herramienta es desplazada lateralmente en cada ciclo del patrón, especificado en el porcentaje del diámetro de la herramienta.</p><p>Un paso del 100% resulta en una no superposición entre dos ciclos diferentes.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Especifica si esta operación utiliza un punto de inicio.</p></body></html> - + Use Start Point Usar Punto Inicial @@ -3139,15 +3139,15 @@ - + Layer Mode Modo de Capa - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Completa la operación en una sola pasada a profundidad, o pasa multiples a la profundidad final.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operación @@ -4036,8 +4036,8 @@ For example: No mostrar más - + Choose a Path Job Elegir una Ruta de Trabajo @@ -4142,8 +4142,8 @@ For example: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Edit Editar @@ -4179,8 +4179,8 @@ For example: Angulo de esquina de corte (%.2f) resulta en de una longitud de punta de la herramienta negativa - + %s is not a Base Model object of the job %s %s No es un objeto del modelo de base del trabajo %s @@ -4737,14 +4737,14 @@ Abortando la creación de la op Inglete - + Outside Fuera - + Inside Interior @@ -5145,24 +5145,24 @@ Abortando la creación de la op Path_Dressup - + Please select one path object Por favor seleccione un objeto de trayectoria - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Path object Por favor seleccione un objeto de trayectoria @@ -5483,14 +5483,14 @@ Abortando la creación de la op Base de la ruta está vacía. - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Profile object Por favor, seleccione un perfil del objeto @@ -6044,15 +6044,15 @@ Abortando la creación de la op Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) @@ -7066,8 +7066,8 @@ Abortando la creación de la op Huesos de Perro - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 655b679cce..41cc4ed2d8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify La trayectoria base a modificar @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distancia máxima antes de que una Unión de inglete este truncada - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Hacer falso, para evitar la operación generación de código @@ -167,8 +167,8 @@ Puntos base para esta operación - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Punto de partida de esta trayectoria - - + + Make True, if specifying a Start Point Hacer verdadero, sí especifica un punto inicial @@ -367,44 +367,44 @@ Cómo de lejos se extiende la profundidad del taladro - + Width of tags. Anchura de las etiquetas. - + Height of tags. Altura de las etiquetas. - + Angle of tag plunge and ascent. Ángulo de etiqueta penetración y ascenso. - + Radius of the fillet for the tag. Radio del redondeo de la etiqueta. - + Locations of inserted holding tags Ubicaciones de las etiquetas de sujeción insertadas - + IDs of disabled holding tags ID de etiquetas de retención deshabilitadas - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Utiliza el contorno de la geometría de base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objetos base adicionales para ser grabados @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formulario @@ -2151,9 +2151,9 @@ <html><head/><body><p>Añadir características seleccionadas a la lista de geometrías base para esta operación.</p></body></html> - + Add Añadir @@ -2163,10 +2163,10 @@ <html><head/><body><p>Eliminar los elementos de la lista seleccionada de la lista de geometrías base. La operación no se aplicará a ellos.</p></body></html> - - + + Remove Quitar @@ -2176,8 +2176,8 @@ <html><head/><body><p>Limpia lista de geometrías base.</p></body></html> - + Clear Limpiar @@ -2268,53 +2268,53 @@ Todas las ubicaciones serán procesadas usando las mismas propiedades de operación. - + Start Depth Profundidad de Inicio - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Profundidad de Inicio de la operación. El punto más alto en el eje Z que la operación debe procesar.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transferir el valor Z de la característica seleccionada como la Profundidad de Inicio para la operación.</p></body></html> - - + + ... ... - + Final Depth Profundidad Final - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>La profundidad de la operación que corresponde al valor más bajo del eje Z que la operación debe procesar.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transferir el valor Z de la característica seleccionada como la Profundidad Final de la operación.</p></body></html> - + Step Down Bajar @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ControladorDeHerramientas - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>La herramienta y sus ajustes para esta operación.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Modo Refrigerante @@ -2421,20 +2421,20 @@ G-Code - - - - + + + + Tool Controller Controlador de herramienta - + Coolant Refrigerante @@ -2459,8 +2459,8 @@ <html><head/><body><p>Tipo de operación adaptativa</p></body></html> - + Step Over Percent Porcentaje de Paso @@ -2550,8 +2550,8 @@ Finalizando perfil - + Use Outline Usar Contorno @@ -2561,10 +2561,10 @@ Parar - - + + Direction Dirección @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>La cantidad por la cual la herramienta es desplazada lateralmente en cada ciclo del patrón, especificado en el porcentaje del diámetro de la herramienta.</p><p>Un paso del 100% resulta en una no superposición entre dos ciclos diferentes.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Especifica si esta operación utiliza un punto de inicio.</p></body></html> - + Use Start Point Usar Punto Inicial @@ -3139,15 +3139,15 @@ - + Layer Mode Modo de Capa - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Completa la operación en una sola pasada a profundidad, o pasa multiples a la profundidad final.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operación @@ -4036,8 +4036,8 @@ For example: No mostrar más - + Choose a Path Job Elegir una Ruta de Trabajo @@ -4142,8 +4142,8 @@ For example: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Edit Editar @@ -4179,8 +4179,8 @@ For example: Angulo de esquina de corte (%.2f) resulta en de una longitud de punta de la herramienta negativa - + %s is not a Base Model object of the job %s %s No es un objeto del modelo de base del trabajo %s @@ -4737,14 +4737,14 @@ Abortando la creación de la op Inglete - + Outside Fuera - + Inside Interior @@ -5145,24 +5145,24 @@ Abortando la creación de la op Path_Dressup - + Please select one path object Por favor seleccione un objeto de trayectoria - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Path object Por favor seleccione un objeto de trayectoria @@ -5483,14 +5483,14 @@ Abortando la creación de la op Base de la ruta está vacía. - + The selected object is not a path El objeto seleccionado no es una trayectoria - + Please select a Profile object Por favor, seleccione un perfil del objeto @@ -6044,15 +6044,15 @@ Abortando la creación de la op Path_Profile - + Profile Perfíl - + Profile entire model, selected face(s) or selected edge(s) Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) @@ -7066,8 +7066,8 @@ Abortando la creación de la op Huesos de Perro - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm index 44ea4ec8e0..294326448f 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index cbeb502539..aa7f4a3b82 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Aldatuko den oinarri-bidea @@ -55,13 +55,13 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan (CW), edo aurka (CCW) - + Choose how to process multiple Base Geometry features. Aukeratu nola prozesatuko diren oinarri-geometriako elementu anitz. @@ -76,9 +76,9 @@ Elkartze zorrotz bat trunkatzen hasteko distantzia maximoa - + Extra value to stay away from final profile- good for roughing toolpath Amaierako profiletik aldentzeko balio gehigarria - ona arbastatzeko tresna-bidearentzako @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu @@ -167,11 +167,11 @@ Eragiketa honetarako oinarri-kokapenak - + The tool controller that will be used to calculate the path - The tool controller that will be used to calculate the path + Bidea kalkulatzeko erabiliko den tresna-kontrolatzailea @@ -219,10 +219,10 @@ Bide honen hasiera-puntua - - + + Make True, if specifying a Start Point Markatu 'Egia', hasierako puntu bat adieraziko bada @@ -367,44 +367,44 @@ Noraino luzatuko den zulatze-sakonera - + Width of tags. Etiketen zabalera. - + Height of tags. Etiketen altuera. - + Angle of tag plunge and ascent. Etiketaren murgiltze- eta igotze-angelua. - + Radius of the fillet for the tag. Biribiltze-erradioa etiketarako. - + Locations of inserted holding tags Txertatutako euste-etiketen kokapenak - + IDs of disabled holding tags Desgaitutako euste-etiketen IDak - + Factor determining the # of segments used to approximate rounded tags. Etiketa biribilduetara hurbiltzeko erabiliko diren # segmentuak zehazteko faktorea. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Erakutsi aldi baterako bide-eraikuntzaren objektuak modulua ARAZKETA moduan dagoenean. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Ezarri eragiketarako erabiliko den garbitze geometrikoko eredua. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Osatu eragiketa pasaldi bakarrean sakoneran, edo pasaldi anitzetan azken sakoneraraino. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Oinarri-geometriaren eskema erabiltzen du. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Pasaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den @@ -953,37 +953,37 @@ Positive extends the beginning of the path, negative shortens. - Positive extends the beginning of the path, negative shortens. + Balio positiboak bidearen hasiera luzatzen du, negatiboak laburtu egiten du. Positive extends the end of the path, negative shortens. - Positive extends the end of the path, negative shortens. + Balio positiboak bidearen amaiera luzatzen du, negatiboak laburtu egiten du. Choose the path orientation with regard to the feature(s) selected. - Choose the path orientation with regard to the feature(s) selected. + Aukeratu elementu hautatu(ar)en araberako bide-orientazioa. Choose what point to use on the first selected feature. - Choose what point to use on the first selected feature. + Aukeratu zein puntu erabiliko den hautatutako lehen elementuan. Choose what point to use on the second selected feature. - Choose what point to use on the second selected feature. + Aukeratu zein puntu erabiliko den hautatutako bigarren elementuan. For arcs/circlular edges, offset the radius for the path. - For arcs/circlular edges, offset the radius for the path. + Arkuen/ertz zirkularren kasurako, desplazatu bidearen erradioa. Enable to reverse the cut direction of the slot path. - Enable to reverse the cut direction of the slot path. + Gaitu arteka-bidearen mozte-norabidea alderantzikatzea. @@ -1008,17 +1008,17 @@ Should the dressup ignore motion commands above DressupStartDepth - Should the dressup ignore motion commands above DressupStartDepth + Jantziak DressupStartDepth gaineko mugimendu-komandoak ezikusiko dituen ala ez The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + Arrapalaren jantzia zein sakoneran gaituko den. Honetatik gora, arrapalak ez dira sortzen, baina mugimendu-komandoak bere horretan igarotzen dira. + - Additional base objects to be engraved Grabatuko diren oinarri-objektu gehigarriak @@ -1255,32 +1255,32 @@ Extra allowance from part bound box in negative X direction - Extra allowance from part bound box in negative X direction + Piezaren muga-kutxaren perdoi gehigarria X norabide negatiboan Extra allowance from part bound box in positive X direction - Extra allowance from part bound box in positive X direction + Piezaren muga-kutxaren perdoi gehigarria X norabide positiboan Extra allowance from part bound box in negative Y direction - Extra allowance from part bound box in negative Y direction + Piezaren muga-kutxaren perdoi gehigarria Y norabide negatiboan Extra allowance from part bound box in positive Y direction - Extra allowance from part bound box in positive Y direction + Piezaren muga-kutxaren perdoi gehigarria Y norabide positiboan Extra allowance from part bound box in negative Z direction - Extra allowance from part bound box in negative Z direction + Piezaren muga-kutxaren perdoi gehigarria Z norabide negatiboan Extra allowance from part bound box in positive Z direction - Extra allowance from part bound box in positive Z direction + Piezaren muga-kutxaren perdoi gehigarria Z norabide positiboan @@ -1405,7 +1405,7 @@ Extra offset to apply to the operation. Direction is operation dependent. - Extra offset to apply to the operation. Direction is operation dependent. + Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Inprimakia @@ -2151,9 +2151,9 @@ <html><head/><body><p>Gehitu hautatutako elementuak eragiketa honetarako oinarri-geometrien zerrendari.</p></body></html> - + Add Gehitu @@ -2163,10 +2163,10 @@ <html><head/><body><p>Kendu hautatutako zerrenda-elementuak oinarri-geometrien zerrendatik. Eragiketa ez zaie aplikatuko.</p></body></html> - - + + Remove Kendu @@ -2176,8 +2176,8 @@ <html><head/><body><p>Garbitu oinarri-geometrien zerrenda.</p></body></html> - + Clear Garbitu @@ -2268,53 +2268,53 @@ Kokapen guztiak eragiketa-propietate berak erabilita prozesatuko dira. - + Start Depth Hasierako sakonera - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Eragiketaren hasierako sakonera. Eragiketak Z ardatzean prozesatu behar duen punturik altuena.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transferitu hautatutako elementuaren Z balioa eragiketaren hasierako sakonerara.</p></body></html> - - + + ... ... - + Final Depth Amaierako sakonera - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Eragiketaren sakonera, eragiketak Z ardatzean prozesatu behar duen punturik baxuenari dagokiona.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transferitu hautatutako elementuaren Z balioa eragiketaren amaierako sakonerara.</p></body></html> - + Step Down Beheratzea @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Tresna-kontrolagailua - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Eragiketa honetan erabiliko den tresna eta bere ezarpenak.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Hozgarri-modua @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tresna-kontrolagailua - + Coolant Hozgarria @@ -2451,7 +2451,7 @@ Operation Type - Operation Type + Eragiketa mota @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Gainditze-ehunekoa @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Erabili eskema @@ -2561,10 +2561,10 @@ Gelditu - - + + Direction Norabidea @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>Tresna saiheska zenbat desplazatuko den ereduaren ziklo bakoitzean.</p><p>Gainditzea % 100ekoa bada, ez da gainjartzerik egongo zikloen artean.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Zehaztu eragiketa honek hasierako puntu bat erabiltzen duen ala ez.</p></body></html> - + Use Start Point Erabili hasiera-puntua @@ -3139,15 +3139,15 @@ - + Layer Mode Geruza-modua - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Osatu eragiketa sakoneko pasaera bakarrean edo pasaera anitzetan azken sakoneraraino.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Eragiketa @@ -4036,8 +4036,8 @@ For example: Ez erakutsi berriro - + Choose a Path Job Aukeratu bide-lan bat @@ -4054,12 +4054,12 @@ For example: No Tool Controller is selected. We need a tool to build a Path. - No Tool Controller is selected. We need a tool to build a Path. + Ez da tresna-kontrolagailurik hautatu. Tresna bat behar da bide bat eraikitzeko. No Tool found or diameter is zero. We need a tool to build a Path. - No Tool found or diameter is zero. We need a tool to build a Path. + Ez da tresnarik aurkitu edo diametroa zero da. Tresna bat behar da bide bat eraikitzeko. @@ -4074,7 +4074,7 @@ For example: Tool Controller feedrates required to calculate the cycle time. - Tool Controller feedrates required to calculate the cycle time. + Tresna-kontrolagailuaren elikatze-abiadura behar da ziklo-denbora kalkulatzeko. @@ -4084,7 +4084,7 @@ For example: Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. - Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. + Gehitu tresna-kontrolagailuaren abiadura azkarrak konfigurazio-orrian, ziklo-denbora zehatzagoak izateko. @@ -4104,22 +4104,22 @@ For example: Legacy tools are deprecated. They will be removed after version 0.20 - Legacy tools are deprecated. They will be removed after version 0.20 + Tresna zaharkituak kendu egingo dira 0.20 bertsioaren ondoren This job contains Legacy tools. Legacy tools are deprecated. They will be removed after version 0.20 - This job contains Legacy tools. Legacy tools are deprecated. They will be removed after version 0.20 + Lanak tresna zaharrak ditu. Tresna zaharrak kendu egingo dira 0.20 bertsioaren ondoren Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. - Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + Zulo-diametroa beharbada ez da zehatza aurpegiaren teselazioaren ondorioz. Agian zuloaren ertza hautatu beharko zenuke. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. - Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + %s.%s elementua ezin da prozesatu zulo zirkular gisa - kendu oinarri-geometrien zerrendatik. @@ -4142,15 +4142,15 @@ For example: Profilatu eredu osoa, aurpegi hautatua(k) edo ertz hautatua(k) - + Edit Editatu A planar adaptive start is unavailable. The non-planar will be attempted. - A planar adaptive start is unavailable. The non-planar will be attempted. + Hasiera moldakor planarra ez dago erabilgarri. Planarra ez dena probatuko da. @@ -4171,7 +4171,7 @@ For example: Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du @@ -4179,8 +4179,8 @@ For example: Mozte-ertzaren angeluak (%.2f) tresna-puntaren luzera negatiboa ematen du - + %s is not a Base Model object of the job %s %s ez da oinarri-ereduen objektua %s lanerako @@ -4737,14 +4737,14 @@ Aukeren sorrera abortatzen Zorrotza - + Outside Kanpoan - + Inside Barruan @@ -5145,24 +5145,24 @@ Aukeren sorrera abortatzen Path_Dressup - + Please select one path object Hautatu bide-objektu bat - + The selected object is not a path Hautatutako objektua ez da bide bat - + Please select a Path object Hautatu bide-objektu bat @@ -5311,7 +5311,7 @@ Aukeren sorrera abortatzen Use Machine CRC - Use Machine CRC + Erabili makinaren CRCa @@ -5351,7 +5351,7 @@ Aukeren sorrera abortatzen Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path - Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + Ebakigailu-erradioaren konpentsazioaren G41/G42 sarrerako jantzi-objektu bat sortzen du hautatutako bide bat erabilita @@ -5379,7 +5379,7 @@ Aukeren sorrera abortatzen Creates a Path Boundary Dress-up object from a selected path - Creates a Path Boundary Dress-up object from a selected path + Bide-mugen jantzi-objektu bat sortzen du hautatutako bide bat erabiliz @@ -5442,7 +5442,7 @@ Aukeren sorrera abortatzen Creates a Ramp Entry Dress-up object from a selected path - Creates a Ramp Entry Dress-up object from a selected path + Arrapala-sarreraren jantzi-objektu bat sortzen du hautatutako bide bat erabiliz @@ -5483,14 +5483,14 @@ Aukeren sorrera abortatzen Oinarri-bidea hutsik dago. - + The selected object is not a path Hautatutako objektua ez da bide bat - + Please select a Profile object Hautatu profil-objektu bat @@ -5517,7 +5517,7 @@ Aukeren sorrera abortatzen Cannot insert holding tags for this path - please select a Profile path - Cannot insert holding tags for this path - please select a Profile path + Ezin dira euste-etiketak txertatu bide honetarako - hautatu profil-bide bat @@ -5568,7 +5568,7 @@ Aukeren sorrera abortatzen Creates a Path Drilling object from a features of a base object - Creates a Path Drilling object from a features of a base object + Bidea zulatzeko objektu bat sortzen du oinarri-objektu bateko elementuetatik @@ -5602,7 +5602,7 @@ Aukeren sorrera abortatzen Exports Path Job as a template to be used for other jobs - Exports Path Job as a template to be used for other jobs + Bide-lana txantiloi gisa esportatzen du, beste lan batzuetan erabili ahal izateko @@ -6044,15 +6044,15 @@ Aukeren sorrera abortatzen Path_Profile - + Profile Profila - + Profile entire model, selected face(s) or selected edge(s) Profilatu eredu osoa, aurpegi hautatua(k) edo ertz hautatua(k) @@ -6067,7 +6067,7 @@ Aukeren sorrera abortatzen Creates an object which can be used to store reference properties. - Creates an object which can be used to store reference properties. + Erreferentzia-propietateak biltegiratzeko erabili daitekeen objektu bat sortzen du. @@ -6456,7 +6456,7 @@ Aukeren sorrera abortatzen Current Extend Radius value produces negative arc radius. - Current Extend Radius value produces negative arc radius. + Uneko hedadura-erradioaren balioak arku-erradio negatiboak sortzen ditu. @@ -6483,7 +6483,7 @@ Aukeren sorrera abortatzen Only a vertex selected. Add another feature to the Base Geometry. - Only a vertex selected. Add another feature to the Base Geometry. + Erpin bakarra hautatu da. Gehitu beste elementu bat oinarri-geometriari. @@ -6508,7 +6508,7 @@ Aukeren sorrera abortatzen Failed, slot from edge only accepts lines, arcs and circles. - Failed, slot from edge only accepts lines, arcs and circles. + Huts egitea, ertzaren artekak lerroak, arkuak eta zirkuluak soilik onartzen ditu. @@ -6715,7 +6715,7 @@ Aukeren sorrera abortatzen Creates a Path Thread Milling operation from features of a base object - Creates a Path Thread Milling operation from features of a base object + Haria fresatzeko bide-eragiketa bat sortzen du oinarri-objektu bateko elementuetatik @@ -6958,7 +6958,7 @@ Aukeren sorrera abortatzen VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du @@ -7066,8 +7066,8 @@ Aukeren sorrera abortatzen Txakur-hezurrak - + Dressup Jantzi diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index 46bcdbfdce..6de7ab8d16 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify The base path to modify @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximum distance before a miter join is truncated - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -167,8 +167,8 @@ Base locations for this operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ The start point of this path - - + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Width of tags. - + Height of tags. Height of tags. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Radius of the fillet for the tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Lomake @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Lisää @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Poista @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Tyhjennä @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Pysäytä - - + + Direction Suunta @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Älä näytä uudelleen - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Muokkaa @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profiili - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index 17255aab17..d8b6b529c1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Ang batayang landas na baguhin @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximum na distansya bago ang miter join ay truncated - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code @@ -167,8 +167,8 @@ Ang mga lokasyon ng base para sa operasyong ito - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Ang simulang point ng path na ito - - + + Make True, if specifying a Start Point Gawing totoo, kung tumutukoy sa isang Start Point @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Lapad ng tags. - + Height of tags. Taas ng tags. - + Angle of tag plunge and ascent. Angle ng tag plunge at ascent. - + Radius of the fillet for the tag. Radius ng fillet para sa tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Ang porsiyento ng cutter diameter upang mag step over sa bawat pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Porma @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Magdugtong @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Ihiwalay @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Malinaw @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Tigil - - + + Direction Direksyon @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit I-edit @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) nagresulta sa negatibong haba ng tool tip - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Mangyaring pumili ng isang path object - + The selected object is not a path Ang napiling object ay hindi isang path - + Please select a Path object Mangyaring pumili ng isang Path Object @@ -5483,14 +5483,14 @@ Aborting op creation Ang Base Path ay walang laman. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Mangyaring pumili ng Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profile - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Mag-ayos diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index 4dca5a4619..58bc781c46 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Le parcours de base à modifier @@ -58,10 +58,10 @@ Direction du parcours d’outils autour de la pièce dans le sens des aiguilles d’une montre ou le sens inverse des aiguilles d’une montre - + Choose how to process multiple Base Geometry features. Choisissez comment traiter plusieurs fonctions de géométrie de base. @@ -76,9 +76,9 @@ Distance maximale avant le troncature de la jointure à onglet - + Extra value to stay away from final profile- good for roughing toolpath Valeur supplémentaire pour rester loin du contour définitif - bon pour les trajectoires d'ébauche @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Mettre à faux, pour empêcher l'opération de générer du code @@ -167,8 +167,8 @@ Point de départ de cette opération - + The tool controller that will be used to calculate the path Le contrôleur d’outil qui sera utilisé pour calculer la trajectoire @@ -219,10 +219,10 @@ Le point de départ de ce parcours - - + + Make True, if specifying a Start Point Marquer « true » si vous définissez un point de départ @@ -367,44 +367,44 @@ Distance d’extension de la profondeur de perçage - + Width of tags. Largeur des étiquettes. - + Height of tags. Hauteur des étiquettes. - + Angle of tag plunge and ascent. Angle de plongée et de montée. - + Radius of the fillet for the tag. Rayon du filet pour l'étiquette. - + Locations of inserted holding tags Emplacement des attaches insérées - + IDs of disabled holding tags Identifiants des attaches désactivées - + Factor determining the # of segments used to approximate rounded tags. Facteur déterminant le nombre de segments utilisés pour obtenir des attaches arrondies. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Afficher les objets de construction de la trajectoire temporaire lorsque le module est en mode DEBUG. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Définissez le modèle de compensation géométrique à utiliser pour l'opération. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Effectuez l'opération en une seule passe à la profondeur voulue, ou en plusieurs passes jusqu'à la profondeur finale. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation Le point de départ personnalisé pour le trajectoire de cette opération @@ -796,8 +796,8 @@ Lorsque ceci est activé, les bords d'extension connectés sont combinés à des fils. - + Uses the outline of the base geometry. Utiliser les contours de la géométrie de base. @@ -868,9 +868,9 @@ Influence sur la précision et les performances + - Percent of cutter diameter to step over on each pass Avance en pourcentage du diamètre de l'outil à chaque passe @@ -1016,9 +1016,9 @@ La profondeur à laquelle la rampe d'entrée est activé. Au-dessus de cette profondeur, les rampes ne sont pas générées, mais les commandes de mouvement sont transmises telles quelles. + - Additional base objects to be engraved Objets de base à graver @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Forme @@ -2151,9 +2151,9 @@ <html><head/><body><p>Ajoutez les fonctions sélectionnées à la liste des géométries de base à cette opération.</p></body></html> - + Add Ajouter @@ -2163,10 +2163,10 @@ <html><head/><body><p>Supprimez les éléments sélectionnés de la liste des géométries de base. L'opération ne leur sera pas appliquée.</p></body></html> - - + + Remove Enlever @@ -2176,8 +2176,8 @@ <html><head/><body><p>Efface la liste des géométries de base.</p></body></html> - + Clear Effacer @@ -2268,53 +2268,53 @@ Tous les emplacements seront traités en utilisant les mêmes propriétés d'opération. - + Start Depth Profondeur initiale - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Profondeur initiale de l'opération. Le point le plus élevé de l'axe Z que l'opération doit traiter.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Utilisez la valeur Z de l'élément sélectionné comme profondeur initiale pour l'opération.</p></body></html> - - + + ... ... - + Final Depth Profondeur finale - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>La profondeur de l'opération qui correspond à la valeur la plus basse selon l'axe Z que l'opération doit traiter.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Utilisez la valeur Z de l'élément sélectionné comme profondeur de fin pour l'opération.</p></body></html> - + Step Down Pas vers le bas @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Contrôleur d'outil - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>L'outil et ses paramètres à utiliser pour cette opération.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Mode de refroidissement @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Contrôleur d'outil - + Coolant Refroidisseur @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type d'opération adaptative</p></body></html> - + Step Over Percent Pourcentage du dépassement @@ -2550,8 +2550,8 @@ Profil de finition - + Use Outline Utiliser le contour @@ -2561,10 +2561,10 @@ Arrêter - - + + Direction Direction @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>La quantité par laquelle l'outil est déplacé latéralement sur chaque cycle du motif, spécifiée en pourcentage du diamètre de l'outil.</p><p>Un dépassement de 100% n'entraîne aucun chevauchement entre deux cycles différents.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Indiquez si cette opération utilise un point de départ.</p></body></html> - + Use Start Point Utiliser le point de départ @@ -3139,15 +3139,15 @@ - + Layer Mode Mode couche - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Effectuer l'opération en une seule passe à la profondeur, ou en plusieurs passes jusquà la profondeur finale.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Opération @@ -3492,7 +3492,7 @@ <html><head/><body><p><br/></p></body></html> - <html><head/><body><p><br/></p></body></html> + <html><head/><body><p><br/></p></body></html> @@ -4037,8 +4037,8 @@ Par exemple : Ne plus afficher - + Choose a Path Job Choisir un chemin de travail @@ -4143,8 +4143,8 @@ Par exemple : Profiler l'intégralité du modèle, de la face ou des faces sélectionnée(s) ou de l'arête ou des arêtes sélectionnée(s) - + Edit Éditer @@ -4180,8 +4180,8 @@ Par exemple : L'angle de l'arête de coupe (%.2f) entraîne une longueur négative de la pointe de l'outil - + %s is not a Base Model object of the job %s %s n’est pas un objet Modèle de Base de la tâche %s @@ -4738,14 +4738,14 @@ Abandon de la création Onglet - + Outside Extérieur - + Inside Intérieur @@ -5146,24 +5146,24 @@ Abandon de la création Path_Dressup - + Please select one path object Veuillez sélectionner un objet parcours - + The selected object is not a path L'objet sélectionné n'est pas un parcours - + Please select a Path object Veuillez sélectionner un object parcours @@ -5484,14 +5484,14 @@ Abandon de la création Le parcours de base est vide. - + The selected object is not a path L'objet sélectionné n'est pas un parcours - + Please select a Profile object Veuillez sélectionner un objet Contour @@ -6045,15 +6045,15 @@ Abandon de la création Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profiler l'intégralité du modèle, de la face ou des faces sélectionnée(s) ou de l'arête ou des arêtes sélectionnée(s) @@ -7067,8 +7067,8 @@ Abandon de la création Dégagements des angles - + Dressup Habiller diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index f879e74c64..68410b0390 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify A traxectoria base para modificar @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distancia máxima antes de que unha unión de inglete esté truncada - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Facer Falso, para impedir a operación dende o código xerado @@ -167,8 +167,8 @@ Posición base para esta operación - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ O punto de principio desta traxectoria - - + + Make True, if specifying a Start Point Facer verdadeiro, se se especifica un punto de principio @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Largura das etiquetas. - + Height of tags. Altura das etiquetas. - + Angle of tag plunge and ascent. Ángulo de etiqueta mentras baixa e ascende. - + Radius of the fillet for the tag. Radio do filete para a etiqueta. - + Locations of inserted holding tags Localizacións para insirir etiquetas de retención - + IDs of disabled holding tags IDs desactivadas nas etiquetas de retención - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Usar a contorna da base xeométrica. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Obxectos base adicionais que deben gravarse @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formulario @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Engadir @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Rexeitar @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Baleirar @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Ferramenta de control - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Parar - - + + Direction Dirección @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operación @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Editar @@ -4179,8 +4179,8 @@ For example: Ángulo do borde de corte (%.2f) resultado en lonxitude negativa da punta da ferramenta - + %s is not a Base Model object of the job %s %s non é un obxecto de Modelo Base do traballo %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Por favor, escolme un obxecto traxectoria - + The selected object is not a path O obxecto escollido non é unha traxectoria - + Please select a Path object Por favor, escolme un obxecto traxectoria @@ -5483,14 +5483,14 @@ Aborting op creation Ruta Base está baleira. - + The selected object is not a path O obxecto escolmado non é unha traxectoria - + Please select a Profile object Por favor escolma un obxecto Perfil @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Máscara diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 4e696acbee..f53c7070d0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Osnovni staza za modifikaciju @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maksimalna udaljenost prije nego je pridružena kosina odrezana - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Postavite na netočno da spriječite generiranje koda @@ -167,8 +167,8 @@ Početna lokacija za ovu operaciju - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -221,10 +221,10 @@ Početna točka ove staze - - + + Make True, if specifying a Start Point Postavite na Točno, ako specificirate Početnu točku @@ -383,44 +383,44 @@ - + Width of tags. Širina oznake. - + Height of tags. Visina oznake. - + Angle of tag plunge and ascent. Kut spusta i uspona držeće trake. - + Radius of the fillet for the tag. Polumjer obruba za oznaku. - + Locations of inserted holding tags Lokacije umetnutih oznaka držača - + IDs of disabled holding tags ID-ovi onemogućenih oznaka držača - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -467,8 +467,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -565,8 +565,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -592,8 +592,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -661,8 +661,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -828,8 +828,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Koristi konturu geometrije baze. @@ -900,9 +900,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Postotak promjera glodala koji bi prelazio u svakom prolazu @@ -1048,9 +1048,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Dodatni osnovni objekti koji trebaju biti gravirani @@ -2022,31 +2022,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Obrazac @@ -2207,9 +2207,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Dodaj @@ -2219,10 +2219,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Ukloniti @@ -2232,8 +2232,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Brisanje @@ -2324,53 +2324,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2421,53 +2421,53 @@ - - - - + + + + ToolController Upravljač alata - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Načini rada rashladne tekućine @@ -2477,20 +2477,20 @@ G Gode - - - - + + + + Tool Controller Kontroler Alata - + Coolant Hlađenje @@ -2515,8 +2515,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2606,8 +2606,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2617,10 +2617,10 @@ Stop - - + + Direction Smjer @@ -2940,8 +2940,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2961,8 +2961,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3195,15 +3195,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3529,8 +3529,8 @@ TPI - + Operation Operacija @@ -4092,8 +4092,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Izaberi posao Staze @@ -4200,8 +4200,8 @@ For example: Profilirajte cijeli model, odabrana lica ili odabrane rubove - + Edit Uredi @@ -4239,8 +4239,8 @@ For example: Kut rezanja ruba (%.2f) rezultira negativnom duljinom vrha alata - + %s is not a Base Model object of the job %s %s nije objekt osnovnog modela zadatka %s @@ -4797,14 +4797,14 @@ Aborting op creation Miter - + Outside Vanjsko - + Inside Inside @@ -5241,24 +5241,24 @@ Aborting op creation Path_Dressup - + Please select one path object Odaberite samo jedan objekt staze - + The selected object is not a path Odabrani objekt nije putanja staze - + Please select a Path object Odaberite objekt staze @@ -5579,14 +5579,14 @@ Aborting op creation Osnovna Staza je prazna. - + The selected object is not a path Odabrani objekt nije putanja staze - + Please select a Profile object Odaberite objekt profila @@ -6144,15 +6144,15 @@ Aborting op creation Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profilirajte cijeli model, odabrana lica ili odabrane rubove @@ -7204,8 +7204,8 @@ Broj linija Kosturi - + Dressup Dodani reljef (dressup) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 381b15ad37..502b61391a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify A megváltoztatni kívánt alap pálya útvonal @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximális távolság, mielőtt a ferde illesztés csonkul - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson @@ -167,8 +167,8 @@ Kiinduló hely ehhez a művelethez - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Ennek a szerszámpályának az induló pontja - - + + Make True, if specifying a Start Point Állítsa igazra, ha egy kiinduló pontot ad meg @@ -367,44 +367,44 @@ A fúrási mélység hosszabbítása - + Width of tags. Címkék szélessége. - + Height of tags. Címkék magassága. - + Angle of tag plunge and ascent. Címke pecsét és emelkedés szöge. - + Radius of the fillet for the tag. Címke lekerekítési sugara. - + Locations of inserted holding tags A beszúrt tartás címkék helye - + IDs of disabled holding tags A letiltott tartó címkék azonosítói - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Használja az alap geometria körvonalát. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Maró átmérő százaléka mellyel átlép minden elhaladáskor @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Kiegészítő alap tárgyakat kell bevésni @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Űrlap @@ -2151,9 +2151,9 @@ <html><head/><body><p>A művelethez kiválasztott funkciókat jelölnek ki a művelet alapgeometriájának listájára.</p></body></html> - + Add Hozzáad @@ -2163,10 +2163,10 @@ <html><head/><body><p>A kiválasztott elemek törlése az alapvető geometriák listájáról. A művelet nem lesz alkalmazva rájuk.</p></body></html> - - + + Remove Törlés @@ -2176,8 +2176,8 @@ <html><head/><body><p>Törli az alapgeometriák listáját.</p></body></html> - + Clear Törlés @@ -2268,53 +2268,53 @@ Az összes hely feldolgozása ugyanazokkal a műveleti tulajdonságokkal történik. - + Start Depth Kezdeti mélység - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Kezdeti műveleti mélység. A művelet által feldolgozni szükséges Z-tengely legmagasabb pontja. </p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>A kiválasztott funkció Z értékének átvitele a művelet kezdő mélységeként.</p></body></html> - - + + ... ... - + Final Depth Végső mélység - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>A művelet mélysége, amely megfelel a művelet által feldolgozni szükséges legalacsonyabb Z-tengely értéknek.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>A kiválasztott funkció Z értékének átvitele a művelet végső mélységeként.</p></body></html> - + Step Down Visszaléptetés @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Eszközvezérlő - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>A művelethez használandó eszköz és beállításai.</p></body> </html> - - - - - - - + + + + + + + Coolant Mode Hűtőközeg mód @@ -2421,20 +2421,20 @@ G Kód - - - - + + + + Tool Controller Eszköz vezérlő - + Coolant Hűtőfolyadék @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Egy lépéssel tovább százalékban @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Kontúr használata @@ -2561,10 +2561,10 @@ Megállít - - + + Direction Irány @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>Az az érték, amellyel a szerszámot oldalirányban mozgatják az egyes mintaciklusokban, a szerszámátmérő százalékában megadva.</p><p>A 100%-os eltolás megakadályozza, hogy két különböző ciklus átfedje egymást.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Adja meg, hogy ez a művelet kiindulási pontot használ-e.</p></body></html> - + Use Start Point Kezdőpont használata @@ -3139,15 +3139,15 @@ - + Layer Mode Réteg mód - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Művelet @@ -4036,8 +4036,8 @@ For example: Ne mutasd többet - + Choose a Path Job Tevékenység elérési útjának kijelölése @@ -4142,8 +4142,8 @@ For example: Használja ki a teljes modellt, jelölje ki a felülete(ke)t vagy a kijelölt él(ek)et - + Edit Szerkesztés @@ -4179,8 +4179,8 @@ For example: Forgácsoló él szög (%.2f) eredménye negatív szerszám csúcs hossz - + %s is not a Base Model object of the job %s %s nem egy alap modell objektuma ennek a feladatnak: %s @@ -4737,14 +4737,14 @@ Az op-létrehozás megszakítása Gérvágó - + Outside Külső - + Inside Belső @@ -5145,24 +5145,24 @@ Az op-létrehozás megszakítása Path_Dressup - + Please select one path object Jelöljön ki egy pálya objektumot - + The selected object is not a path A kijelölt objektum nem pálya útvonal - + Please select a Path object Kérem válasszon egy pályaútvonal objektumot @@ -5483,14 +5483,14 @@ Az op-létrehozás megszakítása Alap útvonal üres. - + The selected object is not a path A kijelölt objektum nem pálya útvonal - + Please select a Profile object Kérem válasszon egy profil objektumot @@ -6044,15 +6044,15 @@ Az op-létrehozás megszakítása Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Használja ki a teljes modellt, jelölje ki a felülete(ke)t vagy a kijelölt él(ek)et @@ -7066,8 +7066,8 @@ Az op-létrehozás megszakítása Dogbones - + Dressup Felépítés diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index f6c5058a27..7562a094fe 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Basis path untuk memodifikasi @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Jarak maksimal sebelum penggabung bergabung dipotong - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -167,8 +167,8 @@ Lokasi dasar untuk operasi ini - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Awal titik ini jalan - - + + Make True, if specifying a Start Point Buat Benar, jika menentukan Titik Awal @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Lebar tag. - + Height of tags. Tinggi tag - + Angle of tag plunge and ascent. Sudut tag terjun dan pendakian. - + Radius of the fillet for the tag. Radius fillet untuk tag . - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Persentase diameter pemotong untuk mengimbangi setiap lintasan @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Bentuk @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Menambahkan @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Menghapus @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Bersih @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Berhenti - - + + Direction Arah @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Edit @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) menghasilkan ujung alat negatif - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,22 +5145,22 @@ Aborting op creation Path_Dressup - + Please select one path object Silahkan pilih satu objek jalan - + The selected object is not a path The dipilih objek bukan jalan - + Please select a Path object Silahkan pilih objek Path @@ -5481,14 +5481,14 @@ Aborting op creation Jalur dasar kosong. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Silahkan pilih objek Profile @@ -6043,15 +6043,15 @@ Aborting op creation Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7065,8 +7065,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.qm b/src/Mod/Path/Gui/Resources/translations/Path_it.qm index 2405a9a06c..14d207941b 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_it.qm and b/src/Mod/Path/Gui/Resources/translations/Path_it.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 086199df83..c7f7438d35 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Il percorso di base da modificare @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distanza massima prima che il giunto di mitra (45°) sia troncato - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Rendere False, per escludere l'operazione dalla generazione del codice @@ -167,8 +167,8 @@ La posizione di base per questa operazione - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Il punto iniziale di questo percorso - - + + Make True, if specifying a Start Point Rendere True, se specifica un punto iniziale @@ -349,7 +349,7 @@ Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth + Calcola la lunghezza della punta e la sottrae dalla profondità finale @@ -367,44 +367,44 @@ Fino a che punto la profondità del trapano è estesa - + Width of tags. Larghezza dei lembi. - + Height of tags. Altezza dei lembi. - + Angle of tag plunge and ascent. Angolo dei lembi in entrata e uscita. - + Radius of the fillet for the tag. Raggio del raccordo per il lembi. - + Locations of inserted holding tags Posizione dei fermi inseriti - + IDs of disabled holding tags ID dei fermi disabilitati - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,15 +451,15 @@ - + Show the temporary path construction objects when module is in DEBUG mode. - Show the temporary path construction objects when module is in DEBUG mode. + Mostra gli oggetti temporanei di costruzione del percorso quando il modulo è in modalità DEBUG. Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Valori più piccoli producono una maglia più fine, più accurata. Valori più piccoli aumentano molto tempo di elaborazione. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,10 +572,10 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. - Complete the operation in a single pass at depth, or mulitiple passes to final depth. + Completa l'operazione con un singolo passaggio in profondità o con più passaggi fino alla profondità finale. @@ -587,7 +587,7 @@ Choose location of the center point for starting the cut pattern. - Choose location of the center point for starting the cut pattern. + Scegliere la posizione del punto centrale per iniziare la sequenza di taglio. @@ -633,14 +633,14 @@ Feedback: three smallest gaps identified in the path geometry. - Feedback: three smallest gaps identified in the path geometry. + Feedback: tre piccoli vuoti identificati nella geometria del percorso. - + The custom start point for the path of this operation - The custom start point for the path of this operation + Il punto di partenza personalizzato per il percorso di questa operazione @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Usa il contorno della geometria di base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percentuale del diametro dell'utensile da sovrapporre alla passata precedente @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Ulteriori oggetti base da incidere @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Modulo @@ -2151,9 +2151,9 @@ <html><head/><body><p>Aggiungi le funzioni selezionate alla lista delle geometrie di base per questa operazione.</p></body></html> - + Add Aggiungi @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Rimuovi @@ -2176,8 +2176,8 @@ <html><head/><body><p>Cancella la lista delle geometrie di base.</p></body></html> - + Clear Pulisci @@ -2268,53 +2268,53 @@ Tutte le posizioni saranno elaborate utilizzando le stesse proprietà operative. - + Start Depth Profondità Iniziale - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Trasferisci il valore Z della funzione selezionata come Profondità Iniziale per l'operazione.</p></body></html> - - + + ... ... - + Final Depth Profondità Finale - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Trasferisci il valore Z della funzione selezionata come Profondità Finale per l'operazione.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Lo strumento e le sue impostazioni da utilizzare per questa operazione.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Modalità refrigerante @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Controllore Strumento - + Coolant Refrigerante @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Percentuale di sovrapposizione @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Usa contorno @@ -2561,10 +2561,10 @@ Ferma - - + + Direction Direzione @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Usa Punto Iniziale @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operazione @@ -4036,8 +4036,8 @@ For example: Non mostrare più - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profila l'intero modello, le facce selezionate o i bordi selezionati - + Edit Modifica @@ -4179,8 +4179,8 @@ For example: L'angolo di taglio (%.2f) risulta negativo nella lunghezza della punta dello strumento - + %s is not a Base Model object of the job %s %s non è un oggetto del Modello Base della lavorazione %s @@ -4737,14 +4737,14 @@ Interruzione creazione op Squadrato - + Outside Esterno - + Inside Interno @@ -5145,24 +5145,24 @@ Interruzione creazione op Path_Dressup - + Please select one path object Si prega di selezionare un oggetto Percorso - + The selected object is not a path L'oggetto selezionato non è un percorso - + Please select a Path object Si prega di selezionare un oggetto Percorso @@ -5483,14 +5483,14 @@ Interruzione creazione op Il Percorso di base è vuoto. - + The selected object is not a path L'oggetto selezionato non è un percorso - + Please select a Profile object Si prega di selezionare un oggetto Profilo @@ -6044,15 +6044,15 @@ Interruzione creazione op Path_Profile - + Profile Profilo - + Profile entire model, selected face(s) or selected edge(s) Profila l'intero modello, le facce selezionate o i bordi selezionati @@ -7066,8 +7066,8 @@ Interruzione creazione op Ossa di cane - + Dressup Vestizione diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 47fa5daffa..74205a2667 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify 変更するベースパス @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ マイタ継ぎ手がとがるまでの最大距離 - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code 生成されたコードの工程を止めるにはFalseにします @@ -167,8 +167,8 @@ この工程のベース位置 - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ このパスの開始点 - - + + Make True, if specifying a Start Point 開始点を指定する場合は True @@ -367,44 +367,44 @@ ドリル深さをどのくらい延長するか - + Width of tags. タグの幅。 - + Height of tags. タグの高さ。 - + Angle of tag plunge and ascent. タグの下降と上昇の角度 - + Radius of the fillet for the tag. タグのフィレットの半径 - + Locations of inserted holding tags 挿入された保持タグの位置 - + IDs of disabled holding tags 無効化された保持タグのID - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. ベースジオメトリーの輪郭を使用 @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass 工具直径に対する経路同士の重なり率（％） @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved 追加の彫刻されるベースオブジェクト @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form フォーム @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add 追加 @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove 削除 @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear クリア @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant 冷却剤 @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ 停止 - - + + Direction 方向 @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation オペレーション @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit 編集 @@ -4179,8 +4179,8 @@ For example: 切れ刃角 (%.2f) は、負の歯先距離をもたらします - + %s is not a Base Model object of the job %s %s は、 ジョブ %s のベースモデル・オブジェクトではありません @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object パスオブジェクトをひとつ選択してください - + The selected object is not a path 選択されたオブジェクトはパスではありません - + Please select a Path object パスオブジェクトを選択して下さい @@ -5483,14 +5483,14 @@ Aborting op creation ベースパスが空です。 - + The selected object is not a path 選択されたオブジェクトはパスではありません - + Please select a Profile object プロファイルオブジェクトを選択してください。 @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile プロファイル - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup ドレスアップ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts index 3491d04425..fc5c7d111e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify ჩასასწორებელი საბაზისო ტრაექტორია @@ -58,10 +58,10 @@ ხელსაწყოს მჭრელი იარაღის მიმართულება საათის(ს. მ.) ან საათის საწინააღმდეგო (ს. ს. მ.) მიმართულებით მოძრაობა - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ მაქსიმალური დაშორება ირიბპირა შეერთებამდე - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code გამორთეთ ოპერაციისთვის კოდის გენერაციის ხელის შესაშლელად @@ -167,8 +167,8 @@ საბაზისო მდებარეობა ამ ოპერაციისთვის - + The tool controller that will be used to calculate the path ტრაექტორიის გამოსათვლელად გამოყენებული ხელსაწყოს კონტროლერი @@ -219,10 +219,10 @@ ამ ტრაექტორიის საწყისი წერტილი - - + + Make True, if specifying a Start Point ჩართვა, თუ საწყისი წერტილი მიეთითება @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. ჭდეების სიგანე. - + Height of tags. ჭდეების სიმაღლე. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. ჭდის მომრგვალების რადიუსი. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. ოპერაციის სიღრმეზე ერთი გავლის დასრულება. ან აირჩიეთ მრავალი გავლა, სრული სიღრმის მისაღწევად. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form ფორმა @@ -2151,9 +2151,9 @@ <html><head/><body><p>მონიშნული თვისებების ამ ოპერაციის საბაზისო გეომეტრიების სიაში ჩამატება.</p></body></html> - + Add დამატება @@ -2163,10 +2163,10 @@ <html><head/><body><p>მონიშნული ელემენტების ბაზისური გეომეტრიების სიიდან წაშლა. ოპერაცია მათზე აღარ გადატარდება.</p></body></html> - - + + Remove მოცილება @@ -2176,8 +2176,8 @@ <html><head/><body><p>საბაზისო გეომეტრიების სიის გასუფთავება.</p></body></html> - + Clear გასუფთავება @@ -2268,53 +2268,53 @@ ყველა მდებარეობა ოპერაციის იგივე თვისებების გამოყენებით დამუშავდება. - + Start Depth საწყისი სიღრმე - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>ოპერაციის საწყისი სიღრმე. Z-ღერძის უმაღლესი წერტილი, რომელიც ამ ოპერაციამ უნდა დაამუშაოს.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>მონიშნული თვისების Z მნიშვნელობის ოპერაციის StartDepth-ად გამოყენება</p></body></html> - - + + ... ... - + Final Depth საბოლოო სიღრმე - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>მონიშნული თვისების Z მნიშვნელობის ოპერაციის საბოლოო სიღრმედ გამოყენება</p></body></html> - + Step Down ბიჯი ქვემოთ @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ხელსაწყოს კონტროლერი - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>ხელსაწყო და ამ ოპერაციაში გამოყენებული მისი პარამეტრები.</p></body></html> - - - - - - - + + + + + + + Coolant Mode გამაგრილებლის რეჟიმი @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller ხელსაწყოს კონტროლერი - + Coolant გამაგრილებელი @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ დამასრულებელი პროფილი - + Use Outline კიდის გამოყენება @@ -2561,10 +2561,10 @@ გაჩერება - - + + Direction მიმართულება @@ -2885,8 +2885,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2906,8 +2906,8 @@ <html><head/><body><p>მიუთითეთ, ეს ოპერაცია საწყის წერტილს იყენებს თუ არა.</p></body></html> - + Use Start Point სასტარტო წერტილის გამოყენება @@ -3140,15 +3140,15 @@ - + Layer Mode ფენის რეჟიმი - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>ოპერაციის სიღრმეზე ერთი გავლის დასრულება. ან აირჩიეთ მრავალი გავლა, სრული სიღრმის მისაღწევად.</p></body></html> @@ -3474,8 +3474,8 @@ TPI - + Operation ოპერაცია @@ -4037,8 +4037,8 @@ For example: აღარ მაჩვენო - + Choose a Path Job აირჩიეთ ტრაექტორიის ამოცანა @@ -4143,8 +4143,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit ჩასწორება @@ -4180,8 +4180,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4738,14 +4738,14 @@ Aborting op creation ირიბპირა - + Outside გარედან - + Inside შიგნით @@ -5146,24 +5146,24 @@ Aborting op creation Path_Dressup - + Please select one path object გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი - + The selected object is not a path მონიშნული ობიექტი მისამართი არაა - + Please select a Path object აირჩიეთ ტრაექტორიის ობიექტი @@ -5484,14 +5484,14 @@ Aborting op creation საბაზისო ტრაექტორია ცარიელია. - + The selected object is not a path მონიშნული ობიექტი ტრაექტორია არაა - + Please select a Profile object გთხოვთ, აირჩიეთ პროფილის ტიპის ობიექტი @@ -6045,15 +6045,15 @@ Aborting op creation Path_Profile - + Profile პროფილი - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7067,8 +7067,8 @@ Aborting op creation ძაღლისძვალები - + Dressup შეფუთვა diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index d265438a55..1f6e955c61 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify The base path to modify @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximum distance before a miter join is truncated - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo @@ -167,8 +167,8 @@ Base locations for this operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ The start point of this path - - + + Make True, if specifying a Start Point Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Width of tags. - + Height of tags. Height of tags. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Žymės suapvalinimo spindulys. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Pavidalas @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Pridėti @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Pašalinti @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Išvalyti @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Stabdyti - - + + Direction Kryptis @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Taisyti @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profilis - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index 3be4c51329..797ed851b7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Het te wijzigen basistraject @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximale afstand voordat een verstekverbinding wordt ingekort - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd @@ -167,8 +167,8 @@ Basislocaties voor deze bewerking - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Het beginpunt van dit pad - - + + Make True, if specifying a Start Point Maak Waar, indien een startpunt wordt gespecificeerd @@ -367,44 +367,44 @@ Hoe ver de boordiepte is uitgebreid - + Width of tags. Breedte van de tags. - + Height of tags. Hoogte van de tags. - + Angle of tag plunge and ascent. Duik- en klimhoek van de tag. - + Radius of the fillet for the tag. Straal van de afronding voor de tag. - + Locations of inserted holding tags Locaties van geïnstalleerde bevestigingslippen - + IDs of disabled holding tags ID's van uitgeschakelde bevestigingslippen - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Maakt gebruik van de omtrek van de basisgeometrie. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percentage van de diameter van de frees om over te stappen bij elke passage @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Extra te graveren basisobjecten @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Vorm @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Toevoegen @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Verwijderen @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Wissen @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Gereedschapsregelaar - + Coolant Koelvloeistof @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Stop - - + + Direction Richting @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Bewerking @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profiel hele model, geselecteerde vlakken(en) of geselecteerde rand(en) - + Edit Bewerken @@ -4179,8 +4179,8 @@ For example: Snijhoek rand (%.2f) resulteert in negatieve tool tip lengte - + %s is not a Base Model object of the job %s %s is geen basismodelsobject van de taak %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Gelieve een padobject te selecteren - + The selected object is not a path Het geselecteerde object is geen pad - + Please select a Path object Gelieve een padobject te selecteren @@ -5483,14 +5483,14 @@ Aborting op creation Basistraject is leeg. - + The selected object is not a path Het geselecteerde object is geen pad - + Please select a Profile object Gelieve een profielobject te selecteren @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profiel - + Profile entire model, selected face(s) or selected edge(s) Profiel hele model, geselecteerde vlakken(en) of geselecteerde rand(en) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Verkleding diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index 1ae4a641ee..b44f433e48 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Ścieżka bazowa do modyfikacji @@ -58,10 +58,10 @@ Kierunek w którym narzędzie porusza się po ścieżce wokół części, zgodnie (CW) lub przeciwnie (CCW) do ruchu wskazówek zegara - + Choose how to process multiple Base Geometry features. Wybierz sposób przetwarzania wielu elementów geometrii podstawowej. @@ -76,9 +76,9 @@ Maksymalna odległość przed obcięciem połączenia kątowego - + Extra value to stay away from final profile- good for roughing toolpath Dodatkowa wartość odległości od końcowego profilu- odpowiednia do obróbki zgrubnej @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu @@ -167,8 +167,8 @@ Lokalizacje bazowe dla tej operacji - + The tool controller that will be used to calculate the path Kontroler narzędzi, który będzie używany do obliczania ścieżki @@ -219,10 +219,10 @@ Punkt początkowy tej ścieżki - - + + Make True, if specifying a Start Point Upewnij się, że określasz punkt początkowy @@ -367,44 +367,44 @@ Wielkość powiększenia głębokości wiercenia - + Width of tags. Szerokość pola mocującego. - + Height of tags. Wysokość pola mocującego. - + Angle of tag plunge and ascent. Kąt zanurzenia i wzniesienia pola mocującego. - + Radius of the fillet for the tag. Promień zaokrąglenia dla pola mocującego. - + Locations of inserted holding tags Pozycje wstawionych pól mocujących - + IDs of disabled holding tags ID wyłączonych pól mocujących - + Factor determining the # of segments used to approximate rounded tags. Współczynnik określający liczbę segmentów użytych do przybliżenia zaokrąglonych znaczników. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Pokaż tymczasowe obiekty konstrukcyjne ścieżki, gdy moduł jest w trybie DEBUGOWANIA. @@ -548,8 +548,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - + Set the geometric clearing pattern to use for the operation. Ustaw geometryczny wzorzec czyszczenia, który ma być używany podczas operacji. @@ -573,8 +573,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Wykonaj operację pojedynczym przejściem na określoną głębokość, lub kilkoma przejściami do głębokości końcowej. @@ -638,8 +638,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - + The custom start point for the path of this operation Niestandardowy punkt początkowy dla ścieżki tej operacji @@ -797,8 +797,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Gdy ta opcja jest włączona, krawędzie połączonych wyciągnięć są łączone i tworzone są ciągi. - + Uses the outline of the base geometry. Używa konturu geometrii podstawowej. @@ -869,9 +869,9 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Wpływa na dokładność i wydajność + - Percent of cutter diameter to step over on each pass Procent średnicy freza do przesunięcia przy każdym przejściu @@ -1017,9 +1017,9 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Głębokość, na której włączona jest funkcja ulepszenia dla rampy. Powyżej niej rampy nie są generowane, ale polecenia ruchu są przekazywane bez zmian. + - Additional base objects to be engraved Dodatkowe obiekty będące podstawą do grawerowania @@ -1966,31 +1966,31 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formularz @@ -2151,9 +2151,9 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. <html><head/><body><p>Dodaj wybrane cechy do listy geometrii bazowych dla tej operacji.</p></body></html> - + Add Dodaj @@ -2163,10 +2163,10 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. <html><head/><body><p>Usuń wybrane elementy z listy geometrii podstawowych. Operacja nie zostanie do nich zastosowana.</p></body></html> - - + + Remove Skasuj @@ -2176,8 +2176,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. <html><head/><body><p>Wyczyść listę geometrii podstawowych.</p></body></html> - + Clear Wyczyść @@ -2268,53 +2268,53 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Wszystkie miejsca będą przetwarzane przy użyciu tych samych właściwości operacji. - + Start Depth Głębokość początkowa - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Zacznij operację od Głębokości. Najwyższy punkt w osi Z, który ma zostać przetworzony.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Przenieś wartość Z wybranej funkcji jako początkową głębokość dla tej operacji</p></body></html> - - + + ... ... - + Final Depth Ostateczna głębokość - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Głębokość operacji, która odpowiada najniższej wartości w osi Z, którą operacja musi przetwarzać.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Przenieś wartość Z wybranego cechy jako końcową głębokość operacji</p></body></html> - + Step Down Krok w dół @@ -2365,53 +2365,53 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - - - - + + + + ToolController Kontroler narzędzi - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Narzędzie i jego ustawienia do wykorzystania w tej operacji.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Tryb chłodzenia @@ -2421,20 +2421,20 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. G Gode - - - - + + + + Tool Controller Kontroler narzędzi - + Coolant Chłodziwo @@ -2459,8 +2459,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. <html><head/><body><p>Typ operacji adaptacyjnej</p></body></html> - + Step Over Percent Krok dalej procentowo @@ -2550,8 +2550,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Wykończ profil - + Use Outline Użyj konturu @@ -2561,10 +2561,10 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Zatrzymaj - - + + Direction Kierunek @@ -2884,8 +2884,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>Wartość, o jaką narzędzie jest przesuwane bocznie w każdym cyklu wzorca, podana w procentach średnicy narzędzia.</p><p>Przesunięcie o 100% powoduje, że dwa różne cykle nie nakładają się na siebie.</p></body></html> @@ -2905,8 +2905,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. <html><head/><body><p>Określ, czy ta operacja używa punktu początkowego.</p></body></html> - + Use Start Point Użyj punktu początkowego @@ -3139,15 +3139,15 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. - + Layer Mode Tryb warstw - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Wykonaj operację w jednym przejściu na głębokość lub w kilku przejściach do głębokości końcowej.</p></body></html> @@ -3473,8 +3473,8 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. TPI - + Operation Operacja @@ -4036,8 +4036,8 @@ Na przykład: Nie wyświetlaj tego więcej - + Choose a Path Job Wybierz ścieżkę zadania @@ -4142,8 +4142,8 @@ Na przykład: Profiluj cały model, wybrane ściany lub wybrane krawędzie - + Edit Edycja @@ -4179,8 +4179,8 @@ Na przykład: Przecinacz krawędzi (%.2f) skutkuje nieprawidłowym narzędziem długości koncówki - + %s is not a Base Model object of the job %s %s nie jest obiektem modelu podstawowego zadania %s @@ -4737,14 +4737,14 @@ Przerwanie procesu tworzenia Ukośnie - + Outside Na zewnątrz - + Inside Wewnątrz @@ -5145,24 +5145,24 @@ Przerwanie procesu tworzenia Path_Dressup - + Please select one path object Proszę wybrać ścieżkę obiektu - + The selected object is not a path Wybrany obiekt nie jest ścieżką - + Please select a Path object Proszę wybrać obiekt-ścieżkę @@ -5483,14 +5483,14 @@ Przerwanie procesu tworzenia Baza ścieżki jest pusta. - + The selected object is not a path Wybrany obiekt nie jest ścieżką - + Please select a Profile object Proszę wybrać profil objektu @@ -6044,15 +6044,15 @@ Przerwanie procesu tworzenia Path_Profile - + Profile Kontur - + Profile entire model, selected face(s) or selected edge(s) Profiluj cały model, wybrane ściany lub wybrane krawędzie @@ -7066,8 +7066,8 @@ Przerwanie procesu tworzenia Nadcięcie w narożnikach - + Dressup Ulepszenie diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index ae941e1c54..78faae8662 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify O caminho de base para modificar @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distancia máxima antes de que uma junta a meia-esquadria ser cortada - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Falso, para impedir a operação de geração de código @@ -167,8 +167,8 @@ Posições de base para esta operação - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ O ponto de partida desta projeção - - + + Make True, if specifying a Start Point Verdadeiro, especificando um ponto de partida @@ -367,44 +367,44 @@ Até que ponto a profundidade da furação é estendida - + Width of tags. Largura das etiquetas. - + Height of tags. Altura das etiquetas. - + Angle of tag plunge and ascent. Ângulo da etiqueta de mergulho e ascensão. - + Radius of the fillet for the tag. Raio do Boleado (fillet) para a etiqueta. - + Locations of inserted holding tags Localização das etiquetas de fixação inseridas - + IDs of disabled holding tags IDs das etiquetas de fixação desativadas - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Usa o contorno da geometria base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percentagem do diâmetro da fresa para sobrepor a cada passagem @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objetos base adicionais a serem gravados @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formulário @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Adicionar @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Remover @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Limpar @@ -2268,53 +2268,53 @@ Todas as localizações serão processadas usando as mesmas propriedades de operação. - + Start Depth Profundidade inicial - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Profundidade final - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Passo Abaixo @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Controlador de Ferramentas - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Modo de resfriamento @@ -2421,20 +2421,20 @@ G Code - - - - + + + + Tool Controller Controlador de ferramenta - + Coolant Líquido de refrigeração @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Usar contorno @@ -2561,10 +2561,10 @@ Parar - - + + Direction Direção @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Usar ponto inicial @@ -3139,15 +3139,15 @@ - + Layer Mode Modo de Camadas - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPP - + Operation Operação @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Escolha uma tarefa de trajetória @@ -4142,8 +4142,8 @@ For example: Perfilar o modelo inteiro, faces selecionadas ou arestas selecionadas - + Edit Editar @@ -4179,8 +4179,8 @@ For example: Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa - + %s is not a Base Model object of the job %s %s não é um objeto modelo de base do trabalho %s @@ -4737,14 +4737,14 @@ Aborting op creation Chanfro - + Outside Lado de Fora - + Inside Lado de Dentro @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Por favor selecione uma trajetória - + The selected object is not a path O objeto selecionado não é uma trajetória - + Please select a Path object Por favor selecione uma trajetória @@ -5483,14 +5483,14 @@ Aborting op creation A trajetória de base está vazia. - + The selected object is not a path O objeto selecionado não é uma trajetória - + Please select a Profile object Por favor, escolha um perfil @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Perfilar o modelo inteiro, faces selecionadas ou arestas selecionadas @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Vestimento diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index eebedc3146..478e3914fb 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify O caminho de base para modificar @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distancia máxima antes de que uma junta a meia-esquadria ser cortada - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Fazer Falso, para impedir a operação de gerar código @@ -167,8 +167,8 @@ Posições de base para esta operação - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ O ponto de partida desta trajetória - - + + Make True, if specifying a Start Point Verdadeiro, se especificar um ponto inicial @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Largura das etiquetas. - + Height of tags. Altura das etiquetas. - + Angle of tag plunge and ascent. Ângulo da etiqueta entrada e saída. - + Radius of the fillet for the tag. Raio do Boleado (fillet) para a etiqueta. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percentagem do diâmetro da fresa para sobrepor a cada passagem @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objetos base adicionais a serem gravados @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formulário @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Adicionar @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Remover @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Limpar @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Controlador de Ferramenta - + Coolant Refrigerante @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Parar - - + + Direction Direção @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operação @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Editar @@ -4179,8 +4179,8 @@ For example: Ângulo de corte de esquina (%.2f) resulta num Comprimento de Ponta da ferramenta negativa - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Por favor selecione uma trajetória - + The selected object is not a path O objeto selecionado não é uma trajetória - + Please select a Path object Por favor selecione uma trajetória @@ -5483,14 +5483,14 @@ Aborting op creation A trajetória de base está vazia. - + The selected object is not a path O objeto selecionado não é uma trajetória - + Please select a Profile object Por favor, selecione um objeto perfil @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup mascarada diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index e92226f025..30771545d0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Traiectoria de bază de modificat @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distanța maximă înainte de cuplarea miterului (45 °) este trunchiată - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Selectează "False" pentru a preveni generarea codului @@ -167,8 +167,8 @@ Locatii de bază pentru această operaţie - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Punctul de pornire al acestei traiectorii - - + + Make True, if specifying a Start Point Marchează « true » dacă este spedificat un Punct de Plecare @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Lăţimea de Tag-uri. - + Height of tags. Înălţimea etichetelor. - + Angle of tag plunge and ascent. Unghiul etichetei la coborâri și ridicări. - + Radius of the fillet for the tag. Raza de racord pentru etichete. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Avansul în procente din diametrul sculei tăietor la fiecare trecere @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Formular @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Adaugă @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Elimină @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Șterge @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Stop - - + + Direction Direcţia @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Editare @@ -4179,8 +4179,8 @@ For example: Unghiul muchiei tăietoare (%.2f) are ca rezultat o lungime negativă a vărfului sculei - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Rugăm selectați doar un obiect Traiectorie - + The selected object is not a path Obiectul selectat nu este o traiectorie - + Please select a Path object Vă rugăm să selectaţi un obiect traiecorie @@ -5483,14 +5483,14 @@ Aborting op creation Traiectoria de bază este vidă. - + The selected object is not a path Obiectul selectat nu este o traiectorie - + Please select a Profile object Vă rugăm să selectaţi un obiect contur @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Îmbracă diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index 0fa6c491d2..8744775e58 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Базовый путь для модификации @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Максимальное расстояние до усечения стыка - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Установите значение в False, чтобы предотвратить генерацию G-кода для операции @@ -167,8 +167,8 @@ Базовое расположение для этой операции - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Начальная точка этого пути - - + + Make True, if specifying a Start Point установить в Истину если указывается начальная точка @@ -367,44 +367,44 @@ Насколько глубоко увеличивается глубина сверления (вероятно речь о длине от кончика сверла до достижения его номинального диаметра, т.е. зависит от угла сверла) - + Width of tags. Ширина технолог. перемычки. - + Height of tags. Высота технолог. перемычки. - + Angle of tag plunge and ascent. Угол погружения и подъёма технологической перемычки. - + Radius of the fillet for the tag. Радиус скругления кромки технологической перемычки. - + Locations of inserted holding tags Места вставленных технологических перемычек - + IDs of disabled holding tags Идентификаторы отключенных технологических перемычек - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Использует контур базовой геометрии. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Процент диаметра фрезы для шага на каждом проходе @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Дополнительные базовые объекты для гравировки @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Форма @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Добавить @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Удалить @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Очистить @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Остановить - - + + Direction Направление @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Операция @@ -4036,8 +4036,8 @@ For example: Больше не показывать - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Обработать всю модель, выбранные грани или выбранные края - + Edit Редактировать @@ -4179,8 +4179,8 @@ For example: Угол режущей кромки (%.2f) приводит к отрицательной длине наконечника инструмента - + %s is not a Base Model object of the job %s %s не является базовым объектом для задания %s @@ -4737,14 +4737,14 @@ Aborting op creation Срез - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Пожалуйста выберите один объект траектории - + The selected object is not a path Выделенный объект не является путём - + Please select a Path object Пожалуйста выберите Путь объект @@ -5483,14 +5483,14 @@ Aborting op creation Базовый Путь пуст. - + The selected object is not a path Выделенный объект не является путём - + Please select a Profile object Пожалуйста выберите Профиль объект @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Профиль - + Profile entire model, selected face(s) or selected edge(s) Обработать всю модель, выбранные грани или выбранные края @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Форма по траектории diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index 0b5530dad3..3dd396a3ae 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Osnovna pot za spremembo @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Največja razdalja preden se spoj na zajero prireže - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Naredi Napak, da se opravilu prepreči ustvarjanje kode @@ -167,8 +167,8 @@ Osnovni položaji za to opravilo - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Začetna točka te poti - - + + Make True, if specifying a Start Point Naredi Resnično, če je določena začetna točka @@ -367,44 +367,44 @@ Koliko je povečana globina vrtanja - + Width of tags. Širina mostičkov. - + Height of tags. Višina mostičkov. - + Angle of tag plunge and ascent. Kot spusta in vzpona pri mostičku. - + Radius of the fillet for the tag. Polmer zaokrožitve za mostiček. - + Locations of inserted holding tags Položaji vstavljenih povezovalnih mostičkov - + IDs of disabled holding tags Določilniki onemogočenih povezovalnih mostičkov - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uporablja obris osnovne geometrije. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Zmik pri vsakem prehodu, izražen v deležu premera rezalnika @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Dodatni osnovni objekt, ki naj bo vrezan @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Oblika @@ -2151,9 +2151,9 @@ <html><head/><body><p>Dodaj na seznam izhodiščnih geometij tega dejanja izbrane značilnosti.</p></body></html> - + Add Dodaj @@ -2163,10 +2163,10 @@ <html><head/><body><p>Odstrani izbrane predmete s seznama izhodiščnih geometrij. Dejanje zanje ne bo uveljavljeno.</p></body></html> - - + + Remove Odstrani @@ -2176,8 +2176,8 @@ <html><head/><body><p>Počisti seznam izhodiščnih geometrij.</p></body></html> - + Clear Počisti @@ -2268,53 +2268,53 @@ Vsa mesta bodo obdelana z dejanji, ki imajo enake lastnosti. - + Start Depth Začetna globina - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Začetna globina dejanja. Najvišja točka na osi Z, ki jo mora dejanje obdelati.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Prenesi vrednost Z izbrane značilnosti kot začetno globino dejanja.</p></body></html> - - + + ... ... - + Final Depth Končna globina - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Globina dejanja, ki odgovarja najnižji vrednosti na osi Z in jo mora dejanje obdelati.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Prenesi vrednost Z izbrane značilnosti kot končno globino dejanja.</p></body></html> - + Step Down Poglobitveni korak @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Orodni krmilnik - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Orodje in njegove nastavitve za to dejanje.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Hladilni način @@ -2421,20 +2421,20 @@ G-koda - - - - + + + + Tool Controller Orodni krmilnik - + Coolant Hladilo @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Odstotek zmika @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Uporabi obris @@ -2561,10 +2561,10 @@ Ustavi - - + + Direction Smer @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>Koliko se orodje vodoravno zmakne pri vsaki ponovitvi vzorca je določeno v odstotnem deležu premera orodja.</p><p>Stoodstotni zmik pomeni, da se pri ponovitvi vzorec ne prekriva.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Določi, če to dejanje uporablja začetno točko.</p></body></html> - + Use Start Point Uporabi začetno točko @@ -3139,15 +3139,15 @@ - + Layer Mode Plastni način - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Končaj dejanje v enem prehodu na globini ali postopno z večkratnim prehodom do končne globine.</p></body></html> @@ -3473,8 +3473,8 @@ NNP - + Operation Dejanje @@ -4036,8 +4036,8 @@ For example: Ne prikazuj več tega - + Choose a Path Job Izberite opravilo poti @@ -4142,8 +4142,8 @@ For example: Oriši celoten model, izbrane ploskve ali izbrane robove - + Edit Uredi @@ -4179,8 +4179,8 @@ For example: Kót rezilnega roba (%.2f) ima za posledico negativno dolžino konice orodja - + %s is not a Base Model object of the job %s %s ni osnovno modelni predmet opravila %s @@ -4737,14 +4737,14 @@ Prekinitev ustvarjanja opravila Zajera - + Outside Zunaj - + Inside Znotraj @@ -5145,24 +5145,24 @@ Prekinitev ustvarjanja opravila Path_Dressup - + Please select one path object Izberite eno pot - + The selected object is not a path Izbrani predmet ni pot - + Please select a Path object Izberite pot @@ -5483,14 +5483,14 @@ Prekinitev ustvarjanja opravila Pot osnove je prazna. - + The selected object is not a path Izbrani predmet ni pot - + Please select a Profile object Izberite oris @@ -6044,15 +6044,15 @@ Prekinitev ustvarjanja opravila Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Oriši celoten model, izbrane ploskve ali izbrane robove @@ -7066,8 +7066,8 @@ Prekinitev ustvarjanja opravila Kosti - + Dressup Dodelava (samodejne običajne dodatne poti za orodje) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index fd8c15e57d..4eb21b7737 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify The base path to modify @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximalt avstånd innan en geringsanfogning avkortas - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -167,8 +167,8 @@ Basplatser för den här åtgärden - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ The start point of this path - - + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -367,44 +367,44 @@ Hur långt borrdjupet är förlängt - + Width of tags. Width of tags. - + Height of tags. Höjd på taggar. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Radius of the fillet for the tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Använder konturerna av basgeometrin. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Procent av fräsdiametern för att kliva över på varje pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Form @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Lägg till @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Ta bort @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Rensa @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Kylmedel @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Stopp - - + + Direction Riktning @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Använd startpunkt @@ -3139,15 +3139,15 @@ - + Layer Mode Lagerläge - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profilera hela modellen, valda ytor eller valda kanter - + Edit Redigera @@ -4179,8 +4179,8 @@ For example: Skäreggsvinkel (%.2f) ger negativt verktygsspetslängd - + %s is not a Base Model object of the job %s %s är inte ett Base Model-objekt av jobbet %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Utanför - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Profil - + Profile entire model, selected face(s) or selected edge(s) Profilera hela modellen, valda ytor eller valda kanter @@ -7066,8 +7066,8 @@ Aborting op creation Hundben - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 9a1b1699d5..fa80dfad94 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Değiştirilecek taban yolu @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Bir gönyeli birleştirme öncesi azami mesafe kesiliyor - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code İşlemin kod üretmesini önlemek için Yanlış yapın @@ -167,8 +167,8 @@ Bu işlem için temel konumlar - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Bu yolun başlangıç noktası - - + + Make True, if specifying a Start Point Bir Başlama Noktası belirtirken Doğru yapın @@ -367,44 +367,44 @@ Matkabın gireceği derinlik artırılır - + Width of tags. Etiket genişliği. - + Height of tags. Satır yüksekliği. - + Angle of tag plunge and ascent. Etiket Dalma ve yükselme açısı. - + Radius of the fillet for the tag. Etiketi için köşe yarıçapı. - + Locations of inserted holding tags Yerleştirilen tutma etiketlerinin bulunduğu yerler - + IDs of disabled holding tags Devre dışı bırakılan tutma etiketlerinin kimlikleri - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Ana geometri için dış çizgiyi kullan. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Her geçide adım atacak kesici çapı yüzdesi @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Ek ana nesneler kazınmış olacak @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Şekil: @@ -2151,9 +2151,9 @@ <html><head/><body><p>Seçili özellikleri bu işlem için temel geometriler listesine ekleyin.</p></body></html> - + Add Ekle @@ -2163,10 +2163,10 @@ <html><head/><body><p>Seçilen liste öğelerini temel geometriler listesinden kaldırın. İşlem onlara uygulanmayacak.</p></body></html> - - + + Remove Kaldır @@ -2176,8 +2176,8 @@ <html><head/><body><p>Temel geometrilerin listesini temizler.</p></body></html> - + Clear Temizle @@ -2268,53 +2268,53 @@ Tüm konumlar aynı işlem özellikleri kullanılarak işlenecektir. - + Start Depth Başlangıç Derinliği - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>İşlemin Başlangıç Derinliği. İşlemin özel işlem uygulaması gereken Z-eksenindeki en yüksek nokta.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Seçili özelliğin Z değerini işlem için Başlangıç Derinliği olarak aktarınız.</p></body></html> - - + + ... ... - + Final Depth Bitiş Derinliği - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>İşlemin özel işlem uygulaması gereken Z-eksenindeki en düşük değere karşılık gelen işlemin derinliği.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>İşlemin Son Derinliği olarak seçili özelliğin Z değerini aktarınız.</p></body></html> - + Step Down Aşağı Yönde Adım Atınız @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController Takım Kontrolcüsü - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>Bu işlem için takım ve takım ayarları kullanılacaktır.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Soğutucu Modu @@ -2421,20 +2421,20 @@ G Kodu - - - - + + + + Tool Controller Araç Denetleyicisi - + Coolant Soğutma sıvısı @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Yüzde üzerinden adımla @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Dış Hattı Kullan @@ -2561,10 +2561,10 @@ Dur - - + + Direction Yön @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>Takım çapının yüzdesi olarak belirtilen, kalıbın her döngüsünde takımın yanal olarak yer değiştirme miktarı.</p><p>%100'ün üzerinden bir adım atmak iki farklı döngü arasında çakışma olmamasına neden olur.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Bu işlemin bir başlangıç noktası kullanıp kullanmadığını belirtin.</p></body></html> - + Use Start Point Başlangıç Noktasını Kullan @@ -3139,15 +3139,15 @@ - + Layer Mode Katman Kipi - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Derinlikte tek bir geçişte veya son derinliğe birden çok geçişte işlemi tamamlayın.</p></body></html> @@ -3474,8 +3474,8 @@ tarama</p></body></html> TPI - + Operation İşlem @@ -4037,8 +4037,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Bir İz İşi Seçiniz @@ -4143,8 +4143,8 @@ For example: Tüm modelin, seçilen yüz(ler) in veya kenar(lar) ın ana hatlarını çiz - + Edit Düzenle @@ -4180,8 +4180,8 @@ For example: Kenar kesme açısı (%.2f) negatif araç ipucu uzunluğu sonuç - + %s is not a Base Model object of the job %s %s işinde %s Temel Model nesnesi değildir @@ -4738,14 +4738,14 @@ Aborting op creation Gönye - + Outside Dışarıda - + Inside İçeride @@ -5146,24 +5146,24 @@ Aborting op creation Path_Dressup - + Please select one path object Lütfen bir yol nesnesi seçin - + The selected object is not a path Seçilen nesne bir yol değil - + Please select a Path object Lütfen bir Yol nesnesi seçin @@ -5484,14 +5484,14 @@ Aborting op creation Temel Yolu boş. - + The selected object is not a path Seçilen nesne bir yol değil - + Please select a Profile object Lütfen temel bir nesne seçin @@ -6045,15 +6045,15 @@ Aborting op creation Path_Profile - + Profile Yan görünüm - + Profile entire model, selected face(s) or selected edge(s) Tüm modelin, seçilen yüz(ler) in veya kenar(lar) ın ana hatlarını çiz @@ -7067,8 +7067,8 @@ Aborting op creation Köpek kemikleri - + Dressup Donanmak diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 56fc59c0c9..6c28fa6314 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Базова траєкторія для зміни @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Maximum distance before a miter join is truncated - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Зробіть False, щоб уникнути операції з генерації коду @@ -167,8 +167,8 @@ Base locations for this operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Початкова точка цієї траєкторії - - + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Width of tags. - + Height of tags. Height of tags. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Radius of the fillet for the tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Відсоток діаметру вирізання для кожного проходу @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Додаткові базові обʼєкти для гравіювання @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Форма @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Додати @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Видалити @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Очистити @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Стоп - - + + Direction Напрямок @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Правка @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Профіль - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index a1cedaa30b..fb26367541 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify El camí de base que es modifica @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Distància màxima abans que es trunque la unió en biaix - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Marqueu «fals», per a evitar l'operació de generació de codi @@ -167,8 +167,8 @@ Posició de base per a aquesta operació - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ El punt d'inici d'aquest camí - - + + Make True, if specifying a Start Point Marqueu «cert», si s'especifica un punt final @@ -367,44 +367,44 @@ Fins on s’amplia la profunditat de la perforació - + Width of tags. Amplària de les etiquetes - + Height of tags. Alçària de les etiquetes - + Angle of tag plunge and ascent. Angle de l'etiqueta durant la penetració i ascens - + Radius of the fillet for the tag. Radi d'arredoniment per a l'etiqueta - + Locations of inserted holding tags Posicions de les etiquetes de subjecció inserides - + IDs of disabled holding tags ID de les etiquetes de subjecció inhabilitades - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Utilitza el contorn de la geometria de base. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Avanç en percentatge del diàmetre de l'eina de tall en cada passada @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Objectes de base addicionals per a gravar @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Forma @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Afegir @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Elimina @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Neteja @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Para - - + + Direction Direcció @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operació @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Edita @@ -4179,8 +4179,8 @@ For example: L'angle de tall (%.2f) dóna com a resultat una longitud negativa de la punta de l'eina - + %s is not a Base Model object of the job %s %s no és un objecte de Model base del treball %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,22 +5145,22 @@ Aborting op creation Path_Dressup - + Please select one path object Seleccioneu un objecte de tipus camí - + The selected object is not a path L'objecte seleccionat no és un camí - + Please select a Path object Seleccioneu un objecte camí @@ -5481,14 +5481,14 @@ Aborting op creation El camí base és buit. - + The selected object is not a path L'objecte seleccionat no és un camí - + Please select a Profile object Seleccioneu un objecte perfil @@ -6042,15 +6042,15 @@ Aborting op creation Path_Profile - + Profile Perfil - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7064,8 +7064,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index f7b84910bf..0bf691bfbd 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify Đường cơ sở để sửa đổi @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ Khoảng cách tối đa trước khi khớp nối bị cắt ngắn - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Làm Sai, để ngăn chặn hoạt động tạo mã @@ -167,8 +167,8 @@ Vị trí cơ sở cho hoạt động này - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ Điểm đầu của đường dẫn này - - + + Make True, if specifying a Start Point Thực hiện đúng, nếu chỉ định điểm đầu @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Chiều rộng của thẻ. - + Height of tags. Chiều cao của thẻ. - + Angle of tag plunge and ascent. Góc của thẻ giảm xuống và tăng lên. - + Radius of the fillet for the tag. Bán kính của phần làm tròn cho thẻ. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form Hình thức @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add Thêm mới @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove Xóa bỏ @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear Xóa @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ Dừng - - + + Direction Hướng @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: Don't Show This Anymore - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit Chỉnh sửa @@ -4179,8 +4179,8 @@ For example: Góc cắt cạnh (%.2f) dẫn đến độ dài đầu công cụ âm - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Vui lòng chọn một đối tượng đường dẫn - + The selected object is not a path Đối tượng được chọn không phải là một đường dẫn - + Please select a Path object Vui lòng chọn đối tượng Đường dẫn @@ -5483,14 +5483,14 @@ Aborting op creation Đường dẫn cơ sở trống. - + The selected object is not a path Đối tượng được chọn không phải là đường dẫn - + Please select a Profile object Hãy chọn một đối tượng cấu hình @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile Cấu hình - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup Dressup diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index 3fcd53a5bc..c3f40ef005 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify 要修改的基路径 @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ 截断斜接之前的最大距离 - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code 使假，以防止生成代码操作 @@ -167,8 +167,8 @@ 此操作的基本位置 - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ 此路径的起点 - - + + Make True, if specifying a Start Point 如果指定起始点, 则为 True @@ -367,44 +367,44 @@ 钻孔深度延伸的距离 - + Width of tags. 掰断留料的宽度。 - + Height of tags. 掰断留料的高度。 - + Angle of tag plunge and ascent. 下角标和上角标的角度。 - + Radius of the fillet for the tag. 掰断留料的圆角半径。 - + Locations of inserted holding tags 插入的掰断留料位置 - + IDs of disabled holding tags 禁用的掰断留料的id - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass 路径彼此相对于刀具直径重叠率 @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved 要雕刻的其他基础对象 @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form 窗体 @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add 添加 @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove 删除 @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear 清除 @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller 工具控制器 - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ 停止 - - + + Direction 方向 @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation 操作 @@ -4036,8 +4036,8 @@ For example: 不再显示 - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit 编辑 @@ -4179,8 +4179,8 @@ For example: 切削角导致工具的提示长度为负值 - + %s is not a Base Model object of the job %s %s 不是作业的 %s 的基本模型对象 @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object 请选择一个路径对象 - + The selected object is not a path 所选对象不是路径 - + Please select a Path object 请选择路径对象 @@ -5483,14 +5483,14 @@ Aborting op creation 基本路径为空。 - + The selected object is not a path 所选对象不是路径 - + Please select a Profile object 请选择一个轮廓对象 @@ -6044,15 +6044,15 @@ Aborting op creation Path_Profile - + Profile 轮廓 - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7066,8 +7066,8 @@ Aborting op creation Dogbones - + Dressup 修饰 diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 9e8b28e752..ebb43581df 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -4,15 +4,15 @@ App::Property - + + + - - - + The base path to modify The base path to modify @@ -58,10 +58,10 @@ The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) - + Choose how to process multiple Base Geometry features. Choose how to process multiple Base Geometry features. @@ -76,9 +76,9 @@ 斜切下的最大距離已被截斷 - + Extra value to stay away from final profile- good for roughing toolpath Extra value to stay away from final profile- good for roughing toolpath @@ -139,8 +139,8 @@ - + Make False, to prevent operation from generating code Make False, to prevent operation from generating code @@ -167,8 +167,8 @@ Base locations for this operation - + The tool controller that will be used to calculate the path The tool controller that will be used to calculate the path @@ -219,10 +219,10 @@ The start point of this path - - + + Make True, if specifying a Start Point Make True, if specifying a Start Point @@ -367,44 +367,44 @@ How far the drill depth is extended - + Width of tags. Width of tags. - + Height of tags. Height of tags. - + Angle of tag plunge and ascent. Angle of tag plunge and ascent. - + Radius of the fillet for the tag. Radius of the fillet for the tag. - + Locations of inserted holding tags Locations of inserted holding tags - + IDs of disabled holding tags IDs of disabled holding tags - + Factor determining the # of segments used to approximate rounded tags. Factor determining the # of segments used to approximate rounded tags. @@ -451,8 +451,8 @@ - + Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. @@ -547,8 +547,8 @@ - + Set the geometric clearing pattern to use for the operation. Set the geometric clearing pattern to use for the operation. @@ -572,8 +572,8 @@ - + Complete the operation in a single pass at depth, or mulitiple passes to final depth. Complete the operation in a single pass at depth, or mulitiple passes to final depth. @@ -637,8 +637,8 @@ - + The custom start point for the path of this operation The custom start point for the path of this operation @@ -796,8 +796,8 @@ When enabled connected extension edges are combined to wires. - + Uses the outline of the base geometry. Uses the outline of the base geometry. @@ -868,9 +868,9 @@ Influences accuracy and performance + - Percent of cutter diameter to step over on each pass Percent of cutter diameter to step over on each pass @@ -1016,9 +1016,9 @@ The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + - Additional base objects to be engraved Additional base objects to be engraved @@ -1966,31 +1966,31 @@ Form - - - - - + + - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + Form 格式 @@ -2151,9 +2151,9 @@ <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> - + Add 新增 @@ -2163,10 +2163,10 @@ <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> - - + + Remove 移除 @@ -2176,8 +2176,8 @@ <html><head/><body><p>Clears list of base geometries.</p></body></html> - + Clear 清除 @@ -2268,53 +2268,53 @@ All locations will be processed using the same operation properties. - + Start Depth Start Depth - + <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> - - + + ... ... - + Final Depth Final Depth - + <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> - + <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> - + Step Down Step Down @@ -2365,53 +2365,53 @@ - - - - + + + + ToolController ToolController - - - - - - - - - - - - + + + + + + + + + + + + <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> - - - - - - - + + + + + + + Coolant Mode Coolant Mode @@ -2421,20 +2421,20 @@ G Gode - - - - + + + + Tool Controller Tool Controller - + Coolant Coolant @@ -2459,8 +2459,8 @@ <html><head/><body><p>Type of adaptive operation</p></body></html> - + Step Over Percent Step Over Percent @@ -2550,8 +2550,8 @@ Finishing Profile - + Use Outline Use Outline @@ -2561,10 +2561,10 @@ 停止 - - + + Direction 方向 @@ -2884,8 +2884,8 @@ - + <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> @@ -2905,8 +2905,8 @@ <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> - + Use Start Point Use Start Point @@ -3139,15 +3139,15 @@ - + Layer Mode Layer Mode - + <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> <html><head/><body><p>Complete the operation in a single pass at depth, or mulitiple passes to final depth.</p></body></html> @@ -3473,8 +3473,8 @@ TPI - + Operation Operation @@ -4036,8 +4036,8 @@ For example: 不再顯示 - + Choose a Path Job Choose a Path Job @@ -4142,8 +4142,8 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Edit 編輯 @@ -4179,8 +4179,8 @@ For example: Cutting Edge Angle (%.2f) results in negative tool tip length - + %s is not a Base Model object of the job %s %s is not a Base Model object of the job %s @@ -4737,14 +4737,14 @@ Aborting op creation Miter - + Outside Outside - + Inside Inside @@ -5145,24 +5145,24 @@ Aborting op creation Path_Dressup - + Please select one path object Please select one path object - + The selected object is not a path The selected object is not a path - + Please select a Path object Please select a Path object @@ -5483,14 +5483,14 @@ Aborting op creation Base Path is empty. - + The selected object is not a path The selected object is not a path - + Please select a Profile object Please select a Profile object @@ -6051,15 +6051,15 @@ PathInspect.py:264 Path_Profile - + Profile 外觀 - + Profile entire model, selected face(s) or selected edge(s) Profile entire model, selected face(s) or selected edge(s) @@ -7073,8 +7073,8 @@ PathInspect.py:264 Dogbones - + Dressup Dressup diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm index 1c1b81f5f7..8eaf0596c7 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts index 91a6b5b2b0..9c9f446d57 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ca.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecció incorrecta @@ -381,11 +381,11 @@ Seleccionar un Robot - + Select one Robot and one Trajectory object. Seleccionar un Robot i un objecte de trajectòria. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts index 35db245f94..16a4fd1f97 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Neplatný výběr @@ -381,11 +381,11 @@ Vyberte robota - + Select one Robot and one Trajectory object. Vyberte jednoho robota a objekt jedné trakjektorie. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts index f4de36a674..2f29823e23 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Falsche Auswahl @@ -381,11 +381,11 @@ Einen Roboter auswählen - + Select one Robot and one Trajectory object. Wählen Sie einen Roboter und eine Bewegungsbahn. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts index bfba1275fc..8d23b36f70 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_el.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Λάθος επιλογή @@ -381,11 +381,11 @@ Επιλέξτε ένα Ρομπότ - + Select one Robot and one Trajectory object. Επιλέξτε ένα Ρομπότ και ένα Αντικείμενο Τροχιάς. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts index 6f934bf5f4..4bb441bc27 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_es-AR.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selección Incorrecta @@ -381,11 +381,11 @@ Seleccionar un Robot - + Select one Robot and one Trajectory object. Seleccione un Robot y un objeto de Trayectoria. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts index a47fa7f8c0..d06af672bb 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selección incorrecta @@ -381,11 +381,11 @@ Seleccione un Robot - + Select one Robot and one Trajectory object. Seleccione un robot y un objeto trayectoria. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts index f49ccef000..e04d5744e5 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_eu.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Hautapen okerra @@ -381,11 +381,11 @@ Hautatu robot bat - + Select one Robot and one Trajectory object. Hautatu robot bat eta ibilbide-objektu bat. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts index 1dd874253f..7f8ea999a6 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Väärä valinta @@ -381,11 +381,11 @@ Valitse yksi Robotti - + Select one Robot and one Trajectory object. Valitse yksi robotti ja yksi liikeradan objekti. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fil.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fil.ts index 710be1d9ae..4877515851 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fil.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fil.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Maling pagpili @@ -381,11 +381,11 @@ Pumli ng isang robot - + Select one Robot and one Trajectory object. Pumili ng isang Robot at isang Trajectory object. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts index dea0e6d076..73223c6d91 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Mauvaise sélection @@ -381,11 +381,11 @@ Sélectionnez un robot - + Select one Robot and one Trajectory object. Sélectionnez un robot et une trajectoire. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts index d5925dc07c..dcc2fa2e8c 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_gl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Escolma errada @@ -381,11 +381,11 @@ Escolmar un Robot - + Select one Robot and one Trajectory object. Escolmar un robot mais un obxecto traxectoria. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts index ef90db521a..30abac1497 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Pogrešan odabir @@ -381,11 +381,11 @@ Odaberite jedan Robot - + Select one Robot and one Trajectory object. Odaberite jedan robot i jedanu putanju objekta. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts index 892eadd5f9..5149fa9263 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Rossz kiválasztás @@ -381,11 +381,11 @@ Válasszon ki egy robotot - + Select one Robot and one Trajectory object. Egy Robot és egy útvonal objektum kijelölése. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts index 0eb7e4b257..6cb72e99f1 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_id.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Pilihan salah @@ -381,11 +381,11 @@ Pilih satu Robot - + Select one Robot and one Trajectory object. Pilih satu Robot dan satu objek lintasan. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts index 2d89f19ff4..286ee24cea 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selezione errata @@ -381,11 +381,11 @@ Selezionare un Robot - + Select one Robot and one Trajectory object. Selezionare un Robot e un oggetto Traiettoria. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts index 61c34b37fb..1f014e6a0a 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 誤った選択 @@ -381,11 +381,11 @@ 1台のロボットを選択する - + Select one Robot and one Trajectory object. 1 つのロボットと軌道オブジェクトを 1 つ選択します。 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts index f42f64fab8..b68713a5b6 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ka.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection არასწორი არჩევანი @@ -381,11 +381,11 @@ ერთი რობოტის ჩასმა - + Select one Robot and one Trajectory object. აირჩიეთ ერთი რობოტი და ერთი ტრაექტორიის ობიექტი. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_lt.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_lt.ts index 20581e9f79..20d10a2876 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_lt.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_lt.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Netinkama pasirinktis @@ -381,11 +381,11 @@ Pasirinkite vieną Robotą - + Select one Robot and one Trajectory object. Pasirinkite vieną robotą ir vieną judėjimo kelio objektą. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts index b28c70210d..3d4fbd37db 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Verkeerde selectie @@ -381,11 +381,11 @@ Selecteer een Robot - + Select one Robot and one Trajectory object. Selecteer één robot en één traject-object. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts index 13993665de..d41cdc282f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Niewłaściwy wybór @@ -381,11 +381,11 @@ Zaznacz jednego Robota - + Select one Robot and one Trajectory object. Wybierz jednego robota i jedną trasę pracy. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts index 2d6251a1f7..a3086f5cf3 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Seleção errada @@ -381,11 +381,11 @@ Selecione um robô - + Select one Robot and one Trajectory object. Selecione um robô e uma trajetória. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts index 85a8c1a78c..20d545a357 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Seleção errada @@ -381,11 +381,11 @@ Selecione um robô - + Select one Robot and one Trajectory object. Selecionar um Robô e um Objeto da Trajetória diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts index 4f7e1a2286..4d0573bc28 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecţie greşită @@ -381,11 +381,11 @@ Selectaţi un Robot - + Select one Robot and one Trajectory object. Selectaţi un obiect Robot şi un obiect de Traiectorie. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts index 52251ebde9..a6faafef82 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Неверный выбор @@ -381,11 +381,11 @@ Выберите одного робота - + Select one Robot and one Trajectory object. Выберите робота и траекторию движения объекта. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts index 1ac96ae2c7..ad1cc299d9 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sl.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Napačna izbira @@ -381,11 +381,11 @@ Izberite enega robota - + Select one Robot and one Trajectory object. Izberite enega robota in eno pot diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts index 9ca502e2f8..0b4419dcca 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Fel val @@ -381,11 +381,11 @@ Välj en Robot - + Select one Robot and one Trajectory object. Välj en robot och ett banobjekt. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts index 06cc06a4a1..41e8751653 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_tr.ts @@ -357,17 +357,17 @@ QObject - - - - - + + + + + Wrong selection Yanlış seçim @@ -382,11 +382,11 @@ Bir Robot seç - + Select one Robot and one Trajectory object. Bir Robot ve bir Yörünge nesnesi seçin. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts index ac25a43d87..28e2c0c4fc 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Невірний вибір @@ -381,11 +381,11 @@ Оберіть одного Робота - + Select one Robot and one Trajectory object. Виберіть один робот і одну траєкторію об'єкта. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts index 14205fbd7d..f6c9a7fa64 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_val-ES.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Selecció incorrecta @@ -381,11 +381,11 @@ Seleccioneu un robot - + Select one Robot and one Trajectory object. Seleccioneu un robot i una trajectòria diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_vi.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_vi.ts index 3f870c6c71..7934f31634 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_vi.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_vi.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection Lựa chọn sai @@ -381,11 +381,11 @@ Chọn một Rô bốt - + Select one Robot and one Trajectory object. Chọn một Rô bốt và một đối tượng quỹ đạo. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts index e4bfe9c9f2..539d6220fe 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 选择错误 @@ -381,11 +381,11 @@ 选择一个机器人 - + Select one Robot and one Trajectory object. 选择一个机器人和一个轨迹对象. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts index d3cdf84d1d..b301713850 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts @@ -356,17 +356,17 @@ QObject - - - - - + + + + + Wrong selection 錯誤的選取 @@ -381,11 +381,11 @@ 選取一機器人 - + Select one Robot and one Trajectory object. 選取一個機器人和一軌跡物件 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index 03a2ffa7cc..f3b110f87e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -1694,11 +1694,11 @@ restriccions invàlides, geometries degenerades, etc. Afegir restricció de Bloqueig + + - - Add coincident constraint Afegir restricció de coincidència @@ -2332,6 +2332,39 @@ restriccions invàlides, geometries degenerades, etc. No adjuntar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2463,39 +2496,6 @@ restriccions invàlides, geometries degenerades, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selecció incorrecta @@ -2559,6 +2559,8 @@ restriccions invàlides, geometries degenerades, etc. Seleccioneu una aresta del croquis. + + @@ -2575,8 +2577,6 @@ restriccions invàlides, geometries degenerades, etc. - - Impossible constraint Restricció impossible @@ -2678,6 +2678,7 @@ restriccions invàlides, geometries degenerades, etc. Seleccioneu sols arestes del croquis. + @@ -2685,7 +2686,6 @@ restriccions invàlides, geometries degenerades, etc. - Error Error @@ -3158,9 +3158,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Error del nucli del CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index bb59cd8fc1..3090eebbed 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -1696,11 +1696,11 @@ neplatných vazeb, degenerované geometrie atd. Přidat blokovou vazbu + + - - Add coincident constraint Přidat vazbu shodnosti @@ -2334,6 +2334,39 @@ neplatných vazeb, degenerované geometrie atd. Nelze připojit + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2465,39 +2498,6 @@ neplatných vazeb, degenerované geometrie atd. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Neplatný výběr @@ -2561,6 +2561,8 @@ neplatných vazeb, degenerované geometrie atd. Vyber hranu z náčrtu. + + @@ -2577,8 +2579,6 @@ neplatných vazeb, degenerované geometrie atd. - - Impossible constraint Nemožné omezení @@ -2680,6 +2680,7 @@ neplatných vazeb, degenerované geometrie atd. Vyberte pouze hrany z náčrtu. + @@ -2687,7 +2688,6 @@ neplatných vazeb, degenerované geometrie atd. - Error Chyba @@ -3164,9 +3164,9 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Chyba jádra CADu diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index add1b27982..9fdd9b3840 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index e2bb9ce56b..7e6a5f831f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -1694,11 +1694,11 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Fixier-Einschränkung hinzufügen + + - - Add coincident constraint Übereinstimmungseinschränkung hinzufügen @@ -2332,6 +2332,39 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Nicht anhängen + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2463,39 +2496,6 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Falsche Auswahl @@ -2559,6 +2559,8 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Wählen Sie eine Kante aus der Skizze. + + @@ -2575,8 +2577,6 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - - Impossible constraint Nicht erfüllbare Bedingung @@ -2678,6 +2678,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Wähle nur Kanten aus der Skizze aus. + @@ -2685,7 +2686,6 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - Error Fehlermeldungen @@ -3162,9 +3162,9 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-Kernel-Fehler @@ -3517,7 +3517,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun List control - List control + Listensteuerung @@ -3542,7 +3542,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun 3D view control - 3D view control + 3D-Ansichtssteuerung @@ -4736,7 +4736,7 @@ Es wurden keine Beschränkungen zu diesen Punkten gefunden. Associated Constraint Filter - Associated Constraint Filter + Zugehöriger Beschränkungsfilter @@ -5313,7 +5313,7 @@ This is done by analyzing the sketch geometries and constraints. Malformed constraints: - Malformed constraints: + Fehlerhafte Beschränkungen: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts index ed3e4c4a56..8761ded71e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Να μην πραγματοποιηθεί επισύναψη + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Λάθος επιλογή @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Επιλέξτε μια ακμή από το σκαρίφημα. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Αδύνατος περιορισμός @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Επιλέξτε μόνο ακμές από το σκαρίφημα. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Σφάλμα @@ -3166,9 +3166,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Σφάλμα Πυρήνα CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm index 51705a9949..abb3398ec7 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts index 2eae521404..814f2beb7e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts @@ -1695,11 +1695,11 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción de bloqueo + + - - Add coincident constraint Añadir restricción de coincidencia @@ -2333,6 +2333,39 @@ restricciones inválidas, geometrías degeneradas, etc. No adjuntar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2464,39 +2497,6 @@ restricciones inválidas, geometrías degeneradas, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selección Incorrecta @@ -2560,6 +2560,8 @@ restricciones inválidas, geometrías degeneradas, etc. Seleccione un borde del Croquizador. + + @@ -2576,8 +2578,6 @@ restricciones inválidas, geometrías degeneradas, etc. - - Impossible constraint Restricción imposible @@ -2679,6 +2679,7 @@ restricciones inválidas, geometrías degeneradas, etc. Seleccione solo bordes a partir del croquis. + @@ -2686,7 +2687,6 @@ restricciones inválidas, geometrías degeneradas, etc. - Error Error @@ -3163,9 +3163,9 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Definir el grado de la B-Spline, entre 1 y %1: - + CAD Kernel Error Error de Kernel CAD @@ -5128,8 +5128,8 @@ Esto se basa únicamente en la forma topológica del croquis y no en su conjunto Finds and displays missing coincidences in the sketch. This is done by analyzing the sketch geometries and constraints. - Finds and displays missing coincidences in the sketch. -This is done by analyzing the sketch geometries and constraints. + Encuentra y muestra coincidencias faltantes en el croquis. +Esto se hace al analizar las geometrías y restricciones del croquis. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index 989737beb1..add5a19593 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index 22783dbf07..50276933d7 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -1696,11 +1696,11 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricción de bloqueo + + - - Add coincident constraint Añadir restricción de coincidencia @@ -2334,6 +2334,39 @@ restricciones inválidas, geometrías degeneradas, etc. No adjuntar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2465,39 +2498,6 @@ restricciones inválidas, geometrías degeneradas, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selección incorrecta @@ -2561,6 +2561,8 @@ restricciones inválidas, geometrías degeneradas, etc. Seleccione una arista del croquis. + + @@ -2577,8 +2579,6 @@ restricciones inválidas, geometrías degeneradas, etc. - - Impossible constraint Restricción imposible @@ -2680,6 +2680,7 @@ restricciones inválidas, geometrías degeneradas, etc. Seleccione únicamente aristas de el Croquis. + @@ -2687,7 +2688,6 @@ restricciones inválidas, geometrías degeneradas, etc. - Error Error @@ -3163,9 +3163,9 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Definir el grado de la B-Spline, entre 1 y %1: - + CAD Kernel Error Error del Kernel CAD @@ -5127,8 +5127,8 @@ Esto se basa únicamente en la forma topológica del croquis y no en su conjunto Finds and displays missing coincidences in the sketch. This is done by analyzing the sketch geometries and constraints. - Finds and displays missing coincidences in the sketch. -This is done by analyzing the sketch geometries and constraints. + Encuentra y muestra coincidencias faltantes en el croquis. +Esto se hace al analizar las geometrías y restricciones del croquis. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm index 7208ef8148..a1f70a5536 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index c8d12bb91b..1e570384da 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -1698,11 +1698,11 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Gehitu bloke-murrizketa + + - - Add coincident constraint Gehitu bat datorren murrizketa @@ -2336,6 +2336,39 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Ez erantsi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Hautapen okerra @@ -2563,6 +2563,8 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Hautatu krokiseko ertz bat. + + @@ -2579,8 +2581,6 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - - Impossible constraint Ezinezko murrizketa @@ -2682,6 +2682,7 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Hautatu krokiseko ertzak soilik. + @@ -2689,7 +2690,6 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - Error Errorea @@ -3166,9 +3166,9 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD kernel-errorea @@ -5229,7 +5229,7 @@ This is done by analyzing the sketch geometries and constraints. Disables constraint orientation locking - Disables constraint orientation locking + Orientazio-blokearen murrizketa desgaitzen du @@ -5317,22 +5317,22 @@ This is done by analyzing the sketch geometries and constraints. Over-constrained: - Over-constrained: + Gehiegi murriztutakoa: Malformed constraints: - Malformed constraints: + Gaizki eratutako murrizketak: Redundant constraints: - Redundant constraints: + Murrizketa erredundanteak: Partially redundant: - Partially redundant: + Partzialki erredundantea: @@ -5342,7 +5342,7 @@ This is done by analyzing the sketch geometries and constraints. Under constrained: - Under constrained: + Gutxiegi murriztutakoa: @@ -5352,7 +5352,7 @@ This is done by analyzing the sketch geometries and constraints. Fully constrained - Fully constrained + Osorik murritua @@ -5826,7 +5826,7 @@ Euskarritik askatu nahi duzu? DOF - DOF + DoF diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 3c0d5a1cbd..a09d8eb7dc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -1698,11 +1698,11 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Lisää lohkon rajoitus + + - - Add coincident constraint Lisää yhtenevyys-rajoite @@ -2336,6 +2336,39 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Älä liitä + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Virheellinen valinta @@ -2563,6 +2563,8 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Valitse luonnoksen reuna. + + @@ -2579,8 +2581,6 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - - Impossible constraint Mahdoton rajoite @@ -2682,6 +2682,7 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Valitse vain reunoja luonnoksesta. + @@ -2689,7 +2690,6 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - Error Virhe @@ -3166,9 +3166,9 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-ytimen virhe diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts index e6c7ad5eba..7c5d4ca8a9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts @@ -1699,11 +1699,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2337,6 +2337,39 @@ invalid constraints, degenerated geometry, etc. Huwag i-attach + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2468,39 +2501,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Maling pagpili @@ -2564,6 +2564,8 @@ invalid constraints, degenerated geometry, etc. Pumili ng isang gilid mula sa sketch. + + @@ -2580,8 +2582,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Imposibleng pagpilit @@ -2683,6 +2683,7 @@ invalid constraints, degenerated geometry, etc. Pumili lamang ng mga gilid batay sa disenyo. + @@ -2690,7 +2691,6 @@ invalid constraints, degenerated geometry, etc. - Error Kamalian @@ -3167,9 +3167,9 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Kamalian sa CAD Kernel diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index 04722d2ea5..ce52fc0137 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index bc531c845c..27b59b0c6b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -1692,11 +1692,11 @@ les contraintes invalides, les géométries dégénérées, etc. Ajouter une contrainte de blocage + + - - Add coincident constraint Ajouter une contrainte de coïncidence @@ -2330,6 +2330,39 @@ les contraintes invalides, les géométries dégénérées, etc. Ne pas attacher + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2461,39 +2494,6 @@ les contraintes invalides, les géométries dégénérées, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Sélection invalide @@ -2557,6 +2557,8 @@ les contraintes invalides, les géométries dégénérées, etc. Sélectionnez une arête de l'esquisse. + + @@ -2573,8 +2575,6 @@ les contraintes invalides, les géométries dégénérées, etc. - - Impossible constraint Contrainte impossible @@ -2676,6 +2676,7 @@ les contraintes invalides, les géométries dégénérées, etc. Sélectionnez uniquement des arêtes de l'esquisse. + @@ -2683,7 +2684,6 @@ les contraintes invalides, les géométries dégénérées, etc. - Error Erreur @@ -3160,9 +3160,9 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Définit le degré de la B-spline, entre 1 et %1 : - + CAD Kernel Error Erreur de noyau CAO @@ -5122,8 +5122,8 @@ Cette erreur est purement basée sur la forme topologique de l'esquisse et non s Finds and displays missing coincidences in the sketch. This is done by analyzing the sketch geometries and constraints. - Finds and displays missing coincidences in the sketch. -This is done by analyzing the sketch geometries and constraints. + Trouve et affiche les coïncidences manquantes dans l'esquisse. +Cela est fait en analysant les géométries et les contraintes de l'esquisse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts index b29ee99892..4aeea1942e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Non xuntar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Escolma errada @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Escolme unha aresta do esbozo. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Imposible constrinxir @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Escolmado só de bordos dende esbozos. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Erro @@ -3164,9 +3164,9 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro do Kernel CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 8bd88fca39..6555f8a38a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -1736,11 +1736,11 @@ nevaljana ograničenja, degenerirana geometrija itd. + + - - Add coincident constraint Dodajte podudarno ograničenje @@ -2409,6 +2409,39 @@ nevaljana ograničenja, degenerirana geometrija itd. Nemoj pridodati + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2540,39 +2573,6 @@ nevaljana ograničenja, degenerirana geometrija itd. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Pogrešan odabir @@ -2636,6 +2636,8 @@ nevaljana ograničenja, degenerirana geometrija itd. Odaberite rub skice. + + @@ -2652,8 +2654,6 @@ nevaljana ograničenja, degenerirana geometrija itd. - - Impossible constraint Nemoguće ograničenje @@ -2755,6 +2755,7 @@ nevaljana ograničenja, degenerirana geometrija itd. Odaberite samo rubove sa skice. + @@ -2762,7 +2763,6 @@ nevaljana ograničenja, degenerirana geometrija itd. - Error Pogreška @@ -3247,9 +3247,9 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD Kernel greška diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index ce3a417b62..76ef0391a8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -1695,11 +1695,11 @@ invalid constraints, degenerated geometry, etc. Blokk kényszerítés hozzáadása + + - - Add coincident constraint Véletlenszerű kényszerítés hozzáadása @@ -2333,6 +2333,39 @@ invalid constraints, degenerated geometry, etc. Ne csatolja + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2464,39 +2497,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Rossz kijelölés @@ -2560,6 +2560,8 @@ invalid constraints, degenerated geometry, etc. Egy él kiválasztása a vázlaton. + + @@ -2576,8 +2578,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Lehetetlen kényszerítés @@ -2679,6 +2679,7 @@ invalid constraints, degenerated geometry, etc. Csak éleket válasszon a vázlaton. + @@ -2686,7 +2687,6 @@ invalid constraints, degenerated geometry, etc. - Error Hiba @@ -3163,9 +3163,9 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD rendszermag hiba diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts index 75ee5191bc..179dd8ee4d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts @@ -1700,11 +1700,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2338,6 +2338,39 @@ invalid constraints, degenerated geometry, etc. Jangan pasang + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2469,39 +2502,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Pilihan salah @@ -2565,6 +2565,8 @@ invalid constraints, degenerated geometry, etc. Pilih tepi dari sketsa. + + @@ -2581,8 +2583,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Kendala yang tidak mungkin @@ -2684,6 +2684,7 @@ invalid constraints, degenerated geometry, etc. Select only edges from the sketch. + @@ -2691,7 +2692,6 @@ invalid constraints, degenerated geometry, etc. - Error Kesalahan @@ -3164,9 +3164,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Kernel CAD Error diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index 531d64e3dc..c1fadf6f24 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 0fbf57cef2..1c45744e73 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -1698,11 +1698,11 @@ vincoli non validi, geometria degenerata, ecc. Aggiungi vincolo di blocco + + - - Add coincident constraint Vincola la coincidenza @@ -2336,6 +2336,39 @@ vincoli non validi, geometria degenerata, ecc. Non allegare + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ vincoli non validi, geometria degenerata, ecc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selezione errata @@ -2563,6 +2563,8 @@ vincoli non validi, geometria degenerata, ecc. Seleziona un bordo dello schizzo. + + @@ -2579,8 +2581,6 @@ vincoli non validi, geometria degenerata, ecc. - - Impossible constraint Vincolo Impossible @@ -2682,6 +2682,7 @@ vincoli non validi, geometria degenerata, ecc. Selezionare solo i bordi dallo schizzo. + @@ -2689,7 +2690,6 @@ vincoli non validi, geometria degenerata, ecc. - Error Errore @@ -2805,7 +2805,7 @@ vincoli non validi, geometria degenerata, ecc. This constraint only makes sense on a line segment or a pair of points. - This constraint only makes sense on a line segment or a pair of points. + Questo vincolo ha senso solo su un segmento di linea o su una coppia di punti. @@ -2998,7 +2998,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Sketch axes cannot be used in equality constraints. - Sketch axes cannot be used in equality constraints. + Gli assi dello schizzo non possono essere usati nei vincoli di uguaglianza. @@ -3073,7 +3073,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Sketch axes cannot be used in internal alignment constraint. - Sketch axes cannot be used in internal alignment constraint. + Gli assi dello schizzo non possono essere usati nel vincolo di allineamento interno. @@ -3158,17 +3158,17 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; B-Spline Degree - B-Spline Degree + Grado B-Spline Define B-Spline Degree, between 1 and %1: - Define B-Spline Degree, between 1 and %1: + Definisci il grado B-Spline, tra 1 e %1: - + CAD Kernel Error Errore Kernel CAD @@ -4781,7 +4781,7 @@ Tuttavia, non sono stati trovati i vincoli che riguardano i punti finali. Restricts 3D visibility to the listed elements - Restricts 3D visibility to the listed elements + Limita la visibilità 3D agli elementi elencati diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index 68c0bfee69..cb83e12fdc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -1691,11 +1691,11 @@ invalid constraints, degenerated geometry, etc. ブロック拘束を追加 + + - - Add coincident constraint 一致拘束を追加 @@ -2329,6 +2329,39 @@ invalid constraints, degenerated geometry, etc. アタッチしない + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2460,39 +2493,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection 誤った選択 @@ -2556,6 +2556,8 @@ invalid constraints, degenerated geometry, etc. スケッチからエッジを選択 + + @@ -2572,8 +2574,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint 拘束不可 @@ -2675,6 +2675,7 @@ invalid constraints, degenerated geometry, etc. スケッチからエッジのみを選択 + @@ -2682,7 +2683,6 @@ invalid constraints, degenerated geometry, etc. - Error エラー @@ -3159,9 +3159,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CADカーネルエラー diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts index 0c14980b98..df272bfaca 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts @@ -1696,11 +1696,11 @@ invalid constraints, degenerated geometry, etc. ბლოკის შეზღუდვის დამატება + + - - Add coincident constraint დამთხვევის შეზღუდვის დამატება @@ -2334,6 +2334,39 @@ invalid constraints, degenerated geometry, etc. არ მიამაგრო + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2465,39 +2498,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection არასწორი არჩევანი @@ -2561,6 +2561,8 @@ invalid constraints, degenerated geometry, etc. ესკიზზე წიბოს მონიშვნა. + + @@ -2577,8 +2579,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint შეზღუდვის შეცდომა @@ -2680,6 +2680,7 @@ invalid constraints, degenerated geometry, etc. ესკიზიდან მონიშნეთ მხოლოდ წიბოები. + @@ -2687,7 +2688,6 @@ invalid constraints, degenerated geometry, etc. - Error შეცდომა @@ -3164,9 +3164,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c აღწერეთ B-სპლაინის კუთხე, 1-დან %1-მდე: - + CAD Kernel Error CAD-ის ბირთვის შეცდომა diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts index cd51e04476..aa59c35140 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Nepridėti + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Netinkama pasirinktis @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Pasirinkite kraštinę, esančią brėžinyje. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Neįmanomas apribojimas (ryšys) @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Parenka tik brėžinyje esančias kraštines. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Klaida @@ -3166,9 +3166,9 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD branduolio klaida diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index 390a7d039b..5104917d82 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -1698,11 +1698,11 @@ ongeldige constraints, gedegenereerde geometrie, etc. Blok beperking toevoegen + + - - Add coincident constraint Voeg samenvallende beperking toe @@ -2336,6 +2336,39 @@ ongeldige constraints, gedegenereerde geometrie, etc. Niet bijvoegen + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Verkeerde selectie @@ -2563,6 +2563,8 @@ ongeldige constraints, gedegenereerde geometrie, etc. Selecteer een rand van de schets. + + @@ -2579,8 +2581,6 @@ ongeldige constraints, gedegenereerde geometrie, etc. - - Impossible constraint Onmogelijk beperking @@ -2682,6 +2682,7 @@ ongeldige constraints, gedegenereerde geometrie, etc. Selecteer enkel randen uit de schets. + @@ -2689,7 +2690,6 @@ ongeldige constraints, gedegenereerde geometrie, etc. - Error Fout @@ -3166,9 +3166,9 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-kernelfout diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 166fadab6c..8969e50a33 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -1698,11 +1698,11 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Dodaj wiązanie zablokowania + + - - Add coincident constraint Dodaj wiązanie zbieżności @@ -2336,6 +2336,39 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Nie dołączaj + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Niewłaściwy wybór @@ -2563,6 +2563,8 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Wybierz krawędź ze szkicu. + + @@ -2579,8 +2581,6 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - - Impossible constraint Wiązanie niemożliwe do ustalenia @@ -2682,6 +2682,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Zaznacz tylko krawędzie ze szkicu. + @@ -2689,7 +2690,6 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - Error Błąd @@ -3166,9 +3166,9 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Zdefiniuj stopień krzywej złożonej między 1 a %1: - + CAD Kernel Error Błąd jądra CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index 910ee134b5..5ed20340c9 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -1698,11 +1698,11 @@ restrições inválidas, geometria corrompida, etc. Adicionar restrição 'Bloquear' + + - - Add coincident constraint Adicionar restrição coincidente @@ -2336,6 +2336,39 @@ restrições inválidas, geometria corrompida, etc. Não anexar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ restrições inválidas, geometria corrompida, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Seleção errada @@ -2563,6 +2563,8 @@ restrições inválidas, geometria corrompida, etc. Selecione uma aresta do esboço. + + @@ -2579,8 +2581,6 @@ restrições inválidas, geometria corrompida, etc. - - Impossible constraint Restrição impossível @@ -2682,6 +2682,7 @@ restrições inválidas, geometria corrompida, etc. Selecione somente arestas do esboço. + @@ -2689,7 +2690,6 @@ restrições inválidas, geometria corrompida, etc. - Error Erro @@ -3166,9 +3166,9 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro de Kernel CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index a5cc85d4b6..04bf4929a0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Não fixar + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Seleção errada @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Selecione uma aresta do sketch. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Restrição impossível @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Selecione somente arestas do esboço. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Erro @@ -3166,9 +3166,9 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Erro de Kernel de CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 8e09f63e2b..65d1f2cc24 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. A nu se atașa + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selecţie greşită @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Selectati o margine din schita. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Constrangere imposibila @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Selectaţi o margine din Schiță. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Eroare @@ -3163,9 +3163,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Eroare a nucleului CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index f70ee48a42..48443321d1 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -1693,11 +1693,11 @@ invalid constraints, degenerated geometry, etc. Добавить ограничение блока + + - - Add coincident constraint Добавить ограничение совпадения @@ -2331,6 +2331,39 @@ invalid constraints, degenerated geometry, etc. Не присоединять + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2462,39 +2495,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Неправильный выбор @@ -2558,6 +2558,8 @@ invalid constraints, degenerated geometry, etc. Выбирите ребро в эскизе. + + @@ -2574,8 +2576,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Ограничение невозможно @@ -2677,6 +2677,7 @@ invalid constraints, degenerated geometry, etc. Выберите линии из эскиза. + @@ -2684,7 +2685,6 @@ invalid constraints, degenerated geometry, etc. - Error Ошибки @@ -3159,9 +3159,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Ошибка ядра CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index fee84c9051..db2839a904 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -1696,11 +1696,11 @@ neveljavna omejila, izrojene geometrije, ... Dodaj popolno omejilo + + - - Add coincident constraint Dodaj omejilo sovpadanja @@ -2334,6 +2334,39 @@ neveljavna omejila, izrojene geometrije, ... Ne pripnite + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2465,39 +2498,6 @@ neveljavna omejila, izrojene geometrije, ... - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Napačna izbira @@ -2561,6 +2561,8 @@ neveljavna omejila, izrojene geometrije, ... Izberite rob z očrta. + + @@ -2577,8 +2579,6 @@ neveljavna omejila, izrojene geometrije, ... - - Impossible constraint Nemogočo omejilo @@ -2680,6 +2680,7 @@ neveljavna omejila, izrojene geometrije, ... Izberite le robove z očrta. + @@ -2687,7 +2688,6 @@ neveljavna omejila, izrojene geometrije, ... - Error Napaka @@ -3164,9 +3164,9 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Napaka CAD Jedra diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index 8590513b4c..f4192c7b69 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Koppla inte till + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Fel val @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Välj en kant från skissen. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Omöjlig begränsning @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Välj endast kanter i skissen. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Fel @@ -3166,9 +3166,9 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD-kärnfel diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 689db6ab64..9742fabb64 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -1692,11 +1692,11 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Blok kısıtlaması ekle + + - - Add coincident constraint Çakışıklık sınırlaması ekle @@ -2330,6 +2330,39 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. İliştirilmez + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2461,39 +2494,6 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Yanlış seçim @@ -2557,6 +2557,8 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Taslaktan bir kenar seç + + @@ -2573,8 +2575,6 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - - Impossible constraint İmkansız kısıt @@ -2676,6 +2676,7 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Eskizden sadece kenarları seçin. + @@ -2683,7 +2684,6 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - Error Hata @@ -3160,9 +3160,9 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD Çekirdek Hatası diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index 46817db83a..e65bf3d027 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -1696,11 +1696,11 @@ invalid constraints, degenerated geometry, etc. Додати обмеження блокування + + - - Add coincident constraint Додати обмеження збігу @@ -2334,6 +2334,39 @@ invalid constraints, degenerated geometry, etc. Не приєднувати + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2465,39 +2498,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Невірний вибір @@ -2561,6 +2561,8 @@ invalid constraints, degenerated geometry, etc. Виділіть ребро на ескізі. + + @@ -2577,8 +2579,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Неможливі обмеження @@ -2680,6 +2680,7 @@ invalid constraints, degenerated geometry, etc. Виділіть лише ребра на ескізі. + @@ -2687,7 +2688,6 @@ invalid constraints, degenerated geometry, etc. - Error Помилка @@ -3164,9 +3164,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Визначте ступінь B-сплайну між 1 та %1: - + CAD Kernel Error Помилка ядра CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts index 1477d392f5..befc924680 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Add block constraint + + - - Add coincident constraint Add coincident constraint @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. No adjuntes + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Selecció incorrecta @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Seleccioneu una aresta de l'esbós + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Restricció impossible @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Seleccioneu sols arestes de l'esbós. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Error @@ -3162,9 +3162,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Error del nucli del CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts index d9dc9b5a98..3a92a1f092 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts @@ -1698,11 +1698,11 @@ invalid constraints, degenerated geometry, etc. Thêm ràng buộc ngăn chặn + + - - Add coincident constraint Thêm ràng trùng điểm @@ -2336,6 +2336,39 @@ invalid constraints, degenerated geometry, etc. Không đính kèm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2467,39 +2500,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection Lựa chọn sai @@ -2563,6 +2563,8 @@ invalid constraints, degenerated geometry, etc. Chọn một cạnh từ bản phác họa. + + @@ -2579,8 +2581,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint Ràng buộc không thích hợp @@ -2682,6 +2682,7 @@ invalid constraints, degenerated geometry, etc. Chỉ chọn các cạnh từ bản phác họa. + @@ -2689,7 +2690,6 @@ invalid constraints, degenerated geometry, etc. - Error Lỗi @@ -3166,9 +3166,9 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error Lỗi bộ phận nòng cốt của CAD diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 328c986742..42bb0968a2 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -1694,11 +1694,11 @@ invalid constraints, degenerated geometry, etc. 添加块约束 + + - - Add coincident constraint 添加并发约束 @@ -2332,6 +2332,39 @@ invalid constraints, degenerated geometry, etc. 不要附加 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2463,39 +2496,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection 选择错误 @@ -2559,6 +2559,8 @@ invalid constraints, degenerated geometry, etc. 从草图中选择边. + + @@ -2575,8 +2577,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint 不可约束 @@ -2678,6 +2678,7 @@ invalid constraints, degenerated geometry, etc. 仅从草绘中选择边。 + @@ -2685,7 +2686,6 @@ invalid constraints, degenerated geometry, etc. - Error 错误 @@ -3162,9 +3162,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Define B-Spline Degree, between 1 and %1: - + CAD Kernel Error CAD 内核错误 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 8f0c64a5a6..a14f25b6c4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -1691,11 +1691,11 @@ invalid constraints, degenerated geometry, etc. 添加定位拘束 + + - - Add coincident constraint 添加共點約束 @@ -2329,6 +2329,39 @@ invalid constraints, degenerated geometry, etc. 不要附加上去 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -2460,39 +2493,6 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Wrong selection 錯誤的選取 @@ -2556,6 +2556,8 @@ invalid constraints, degenerated geometry, etc. 於草圖中選擇邊 + + @@ -2572,8 +2574,6 @@ invalid constraints, degenerated geometry, etc. - - Impossible constraint 無法拘束 @@ -2675,6 +2675,7 @@ invalid constraints, degenerated geometry, etc. 僅有邊線能從草圖中被選取 + @@ -2682,7 +2683,6 @@ invalid constraints, degenerated geometry, etc. - Error 錯誤 @@ -3157,9 +3157,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 定義 B 雲形線多項式次數，介於 1 及 %1 之間： - + CAD Kernel Error CAD核心錯誤 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm index 06dc0d3915..14fa774716 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts index b65d87a2d1..131a72c52b 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts @@ -396,12 +396,12 @@ To cells: - To cells: + An Zellen: Sheet: - Sheet: + Blatt: @@ -421,12 +421,12 @@ Start cell address - Start cell address + Adresse der Startzelle End cell address - End cell address + Adresse der Endzelle @@ -461,7 +461,7 @@ with the referenced object. Use with caution! Use hidden reference - Use hidden reference + Versteckte Referenz verwenden @@ -484,12 +484,12 @@ with the referenced object. Use with caution! Setup Configuration Table - Setup Configuration Table + Konfigurationstabelle einrichten Cell range: - Cell range: + Zellbereich: @@ -553,7 +553,7 @@ switch the design configuration. The property will be created if not exist. Optional property group name. - Optional property group name. + Optionaler Eigenschaftsgruppenname. @@ -1020,12 +1020,12 @@ Tabelle.my_Alias_name anstelle von Tabelle.B1 Setup configuration table - Setup configuration table + Konfigurationstabelle einrichten Unsetup configuration table - Unsetup configuration table + Konfigurationstabelle aufheben @@ -1110,7 +1110,7 @@ Tabelle.my_Alias_name anstelle von Tabelle.B1 Recompute - Recompute + Neuberechnung @@ -1120,7 +1120,7 @@ Tabelle.my_Alias_name anstelle von Tabelle.B1 Configuration table... - Configuration table... + Konfigurationstabelle... @@ -1215,7 +1215,7 @@ Tabelle.my_Alias_name anstelle von Tabelle.B1 &Spreadsheet - &Spreadsheet + &Kalkulationstabelle @@ -1225,7 +1225,7 @@ Tabelle.my_Alias_name anstelle von Tabelle.B1 &Styles - &Styles + &Stile diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm index ba13929b5c..b2b0b5a946 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts index 7111afeb53..2ef0d0282a 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts @@ -406,27 +406,27 @@ First cell in range - First cell in range + Barrutiko lehen gelaxka Last cell in range - Last cell in range + Barrutiko azken gelaxka Bind cells: - Bind cells: + Lotu gelaxkak: Start cell address - Start cell address + Hasierako gelaxkaren helbidea End cell address - End cell address + Amaierako gelaxkaren helbidea @@ -484,7 +484,7 @@ with the referenced object. Use with caution! Setup Configuration Table - Setup Configuration Table + Konfiguratu konfigurazio-taula @@ -1020,12 +1020,12 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Setup configuration table - Setup configuration table + Konfiguratu konfigurazio-taula Unsetup configuration table - Unsetup configuration table + Deskonfiguratu konfigurazio-taula @@ -1120,7 +1120,7 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Configuration table... - Configuration table... + Konfigurazio-taula... diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm index aa2cc6ec54..d26637002a 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts index 032953c589..423be9d307 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts @@ -406,57 +406,57 @@ First cell in range - First cell in range + Première cellule de la plage Last cell in range - Last cell in range + Dernière cellule de la plage Bind cells: - Bind cells: + Lier les cellules : Start cell address - Start cell address + Adresse de la cellule de départ End cell address - End cell address + Adresse de la cellule de fin Start cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - Start cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Adresse de la cellule de départ à laquelle se lier. +Tapez '=' si vous voulez utiliser une expression. +L'expression doit être interprétée comme une chaîne de caractères d'une certaine adresse de cellule. End cell address to bind to. Type '=' if you want to use an expression. The expression must evaluate to a string of some cell address. - End cell address to bind to. -Type '=' if you want to use an expression. -The expression must evaluate to a string of some cell address. + Adresse de la cellule de fin à laquelle se lier. +Tapez '=' si vous voulez utiliser une expression. +L'expression doit être interprétée comme une chaîne de caractères d'une certaine adresse de cellule. Which spread sheet to bind to - Which spread sheet to bind to + A quelle feuille de calcul se lier Use hidden reference to avoid creating a dependency with the referenced object. Use with caution! - Use hidden reference to avoid creating a dependency -with the referenced object. Use with caution! + Utilisez la référence cachée pour éviter de créer une dépendance +avec l'objet référencé. A utiliser avec précaution ! diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 15e7fedc58..c5e4af7d04 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -1857,8 +1857,8 @@ Crea una vista de full de càlcul - + Save page to dxf Guardar pàgina com dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selecció incorrecta @@ -2596,9 +2596,6 @@ L'aresta seleccionada és una BSpline. El radi serà aproximat. Voleu continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selecció incorrecta @@ -2707,11 +2707,6 @@ No hi ha cap propietat amb forma en la selecció. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exporta la Pàgina com a SVG + - Are you sure you want to continue? Segur que voleu continuar? @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. No podeu suprimir aquesta línia guia perquè conté un símbol de soldadura que es trencaria. - + - - - + + + Object dependencies Dependències de l'objecte @@ -5103,47 +5103,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Línia central - + Base View Vista base - + Elements Elements - + Orientation Orientació - + Top to Bottom line Línia superior a la part inferior - + Vertical Vertical - + Left to Right line Línia esquerra a la dreta - + Horizontal Horitzontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5153,92 +5153,92 @@ Do you want to continue? - punts: a igual distància entre punts - + Aligned Alineat - + Shift Horizontal Desplaçament horitzontal - + Move line -Left or +Right Mou la línia -esquerra o +dreta - + Shift Vertical Desplaçament vertical - + Move line +Up or -Down Mou la línia +amunt o -avall - + Rotate Rotació - + Rotate line +CCW or -CW Gira la línia +en sentit antihorari CCW o - en sentit horari CW - + Extend By Estén - + Make the line a little longer. Allarga una mica la línia. - + mm mm - + Color Color - + Weight Pes - + Style Estil - + Continuous Continu - + Dash Guió - + Dot Punt - + DashDot Guió punt - + DashDotDot Guió punt punt @@ -5246,38 +5246,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vèrtex cosmètic - + Base View Vista base - + Point Picker Seleccionador de punts - + Position from the view center Posició des del centre de la vista - + Position Position - + X X - + Y Y @@ -5354,312 +5354,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Radi - + Diameter Diàmetre - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Quadrat - + Angles Angles - + Degree Graus - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Altres - + Taper Estrènyer - + Slope Pendent - + Counterbore Fer Calaix - + Countersink Countersink - + Plus - Minus Plus - Minus - + Centerline Línia central - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Previsualització: @@ -5672,68 +5672,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Àncora del detall - + Base View Vista base - + Detail View Vista de detall - + Click to drag detail highlight to new position Feu clic per a arrossegar el ressaltat del detall a una posició nova - + Drag Highlight Arrossega el ressaltat - + X X - + x position of detail highlight within view posició x del ressaltat del detall en la vista - + Y Y - + y position of detail highlight within view posició y del ressaltat del detall en la vista - + Radius Radi - + size of detail view mida de la vista de detall - + Scale Type Tipus d'escala - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5744,37 +5744,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Pàgina - + Automatic Automàtica - + Custom Personalitzat - + Scale Factor Factor d'escala - + scale factor for detail view factor d'escala per la vista de detall - + Reference Ref - + reference label etiqueta de referència diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index d73d331e8c..1cdd6d4542 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -1857,8 +1857,8 @@ Vytvořit pohled tabulky - + Save page to dxf Uložit stránku do dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Nesprávný výběr @@ -2596,9 +2596,6 @@ Vybraná hrana je BSplajn. Poloměr bude přibližný. Pokračovat? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Nesprávný výběr @@ -2707,11 +2707,6 @@ Ve výběru není tvarový prvek. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportovat stránku do SVG + - Are you sure you want to continue? Opravdu si přejete pokračovat? @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. Nemůžete smazat tento odkaz, protože obsahuje symbol svaru, který by se rozbil. - + - - - + + + Object dependencies Závislosti objektu @@ -5111,47 +5111,47 @@ Chcete pokračovat? TechDrawGui::TaskCenterLine - + Center Line Osa - + Base View Základní pohled - + Elements Elementy - + Orientation Orientace - + Top to Bottom line Top to Bottom line - + Vertical Svisle - + Left to Right line Left to Right line - + Horizontal Vodorovně - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5162,92 +5162,92 @@ Chcete pokračovat? - points: in equal distance to the points - + Aligned Zarovnané - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Posunout svisle - + Move line +Up or -Down Move line +Up or -Down - + Rotate Otočit - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Rozšířit o - + Make the line a little longer. Mírně prodloužit čáru. - + mm mm - + Color Barva - + Weight Tloušťka - + Style Styl - + Continuous Continuous - + Dash Čárka - + Dot Tečka - + DashDot Čárka tečka - + DashDotDot Čárka tečka tečka @@ -5255,38 +5255,38 @@ Chcete pokračovat? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Kosmetický vrchol - + Base View Základní pohled - + Point Picker Výběr bodu - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5363,312 +5363,312 @@ Chcete pokračovat? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Symetrie - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Poloměr - + Diameter Průměr - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Čtverec - + Angles Angles - + Degree Stupeň - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Jiný - + Taper Kužel - + Slope Slope - + Counterbore Válcové zahloubení - + Countersink Kuželové zahloubení - + Plus - Minus Plus - Minus - + Centerline osa - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Náhled: @@ -5681,68 +5681,68 @@ Chcete pokračovat? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Základní pohled - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Kreslit zvýrazněně - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Poloměr - + size of detail view velikost náhledu detailu - + Scale Type Typ měřítka - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5753,37 +5753,37 @@ Automaticky: pokud je zobrazení detailu větší než stránka, Vlastní: je použito vlastní měřítko uživatele - + Page Stránka - + Automatic Automaticky - + Custom Vlastní - + Scale Factor Měřítko - + scale factor for detail view měřítko náhledu detailu - + Reference Odkaz - + reference label referenční štítek diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index 9160adb8de..12ef1c9a16 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 8d103680a3..54988239bf 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -1857,8 +1857,8 @@ Kalkulationstabellenansicht erstellen - + Save page to dxf Seite als dxf speichern @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Falsche Auswahl @@ -2596,9 +2596,6 @@ Ausgewählte Kante ist ein B-Spline. Radius wird angenähert. Fortfahren? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Falsche Auswahl @@ -2707,11 +2707,6 @@ Kein Element einer Form in der Auswahl. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -2929,7 +2929,7 @@ No %1 in Selection - No %1 in Selection + Kein %1 in der Auswahl @@ -3009,9 +3009,9 @@ Seite als SVG-Datei exportieren + - Are you sure you want to continue? Bist du sicher, dass du fortfahren möchtest? @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. Diese Hinweislinie kann nicht gelöscht werden, weil ihr ein Schweißsymbol zugeordnet ist, das dadurch unbrauchbar werden würde. - + - - - + + + Object dependencies Objektabhängigkeiten @@ -3606,7 +3606,7 @@ Dieses Verzeichnis wird für die Symbolauswahl verwendet. Page Chooser - Page Chooser + Seitenauswahl @@ -4604,17 +4604,17 @@ für Ansichtengruppen verteilen Show Grid - Show Grid + Raster anzeigen Grid Spacing - Grid Spacing + Rasterabstand Distance between Page grid lines. - Distance between Page grid lines. + Abstand zwischen den Rasterlinien der Seite. @@ -5107,47 +5107,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Mittellinie - + Base View Basis-Ansicht - + Elements Elemente - + Orientation Orientierung - + Top to Bottom line Linie von oben nach unten - + Vertical Vertikal - + Left to Right line Linie von links nach rechts - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5157,92 +5157,92 @@ Do you want to continue? - Punkte: in gleicher Entfernung zwischen den Punkten - + Aligned Ausgerichtet - + Shift Horizontal Horizontal verschieben - + Move line -Left or +Right Linie nach links (-) oder nach rechts (+) bewegen - + Shift Vertical Vertikal verschieben - + Move line +Up or -Down Linie nach oben (+) oder nach unten (-) bewegen - + Rotate Drehen - + Rotate line +CCW or -CW Linie gegen den Uhrzeigersinn (+) oder im Uhrzeigersinn (-) drehen - + Extend By Verlängern um - + Make the line a little longer. Verlängere die Linie etwas. - + mm mm - + Color Farbe - + Weight Stärke - + Style Stil - + Continuous Volllinie - + Dash Strichlinie - + Dot Punkt - + DashDot Strich-Punkt - + DashDotDot Strich-Punkt-Punkt @@ -5250,38 +5250,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Hilfspunkt - + Base View Basis-Ansicht - + Point Picker Punkt-Auswahl - + Position from the view center Position vom Ansichtszentrum - + Position Position - + X X - + Y Y @@ -5358,312 +5358,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols - Format Symbols + Formatsymbole - + GD&T GD&T - + Straightness Geradheit - + Flatness Ebenheit - + Circularity Rundheit - + Cylindricity Zylinderform - + Parallelism Parallelität - + Perpendicularity Rechtwinkligkeit - + Angularity Neigung - + Profile of a line Profilform einer Linie - + Profile of a surface Profilform einer Fläche - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity - Concentricity + Konzentrizität - + Symmetry Symmetrie - + Modifiers Modifiers - + derived geometry element abgeleitetes Geometrieelement - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element - Least square geometry element + Geometrieelement des kleinsten Quadrats - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone - Projected tolerance zone + Voraussichtliches Toleranzfeld - + Reciprocity condition - Reciprocity condition + Reziprozitätsbedingung - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Durchmesser - + Radius Radius - + Diameter Durchmesser - + Radius of sphere Kugelradius - + Diameter of sphere Kugeldurchmesser - + Square Quadrat - + Angles Winkel - + Degree Grad - + (Arc) Minute (Bogen-)Minute - + (Arc) Second (Bogen-)Sekunde - + (Arc) Tertie (Arc) Tertie - + Other Andere - + Taper Formschräge - + Slope Neigung - + Counterbore Flachsenkung - + Countersink Kegelsenkung - + Plus - Minus Plus - Minus - + Centerline Mittellinie - + Left/right arrow Left/right arrow - + Downward arrow - Downward arrow + Pfeil nach unten + + + + Multiplication sign + Multiplikationszeichen - Multiplication sign - Multiplication sign - - - Greek Letters Griechische Buchstaben - + Capital delta Großes Delta - + Capital sigma Großes Sigma - + Capital omega Großes Omega - + Small mu Kleines My - + Small sigma Kleines Sigma - + Small phi Kleines Phi - + Small omega Kleines Omega - + Format: - Format: + Format: - + Preview: Vorschau: @@ -5676,68 +5676,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detailanker - + Base View Basis-Ansicht - + Detail View Detailansicht - + Click to drag detail highlight to new position Klicken, um den Detailauswahlrahmen an eine neue Position zu bewegen - + Drag Highlight Auswahl verschieben - + X X - + x position of detail highlight within view X-Position des Detailauswahlrahmens innerhalb der Ansicht - + Y Y - + y position of detail highlight within view Y-Position des Detailauswahlrahmens innerhalb der Ansicht - + Radius Radius - + size of detail view Größe der Detailansicht - + Scale Type Maßstab (Art) - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5748,37 +5748,37 @@ Automatisch: Wenn die Detailansicht größer ist als die Seite, Benutzerdefiniert: Der benutzerdefinierte Maßstab wird verwendet - + Page Seite - + Automatic Automatisch - + Custom Benutzerdefiniert - + Scale Factor Maßstab (Faktor) - + scale factor for detail view Skalierungsfaktor für Detailansicht - + Reference Referenz - + reference label Benennung der Ansicht @@ -6238,7 +6238,7 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. Pick points - Pick points + Punkte auswählen @@ -6246,12 +6246,12 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. Edit points - Edit points + Punkte bearbeiten Edit Points - Edit Points + Punkte bearbeiten @@ -6262,7 +6262,7 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten. Save Points - Save Points + Punkte speichern @@ -7185,38 +7185,38 @@ mit dem vorgegebenen X/Y-Abstand Move a View to a new Page - Move a View to a new Page + Eine Ansicht auf eine neue Seite verschieben Move View to a different Page - Move View to a different Page + Ansicht auf eine andere Seite verschieben Select View to move from list. - Select View to move from list. + Zu verschiebende Ansicht aus Liste auswählen. Select View - Select View + Ansicht auswählen Select From Page. - Select From Page. + Ausgangsseite auswählen. Select Page - Select Page + Seite auswählen Select To Page. - Select To Page. + Zielseite auswählen. @@ -7232,7 +7232,7 @@ mit dem vorgegebenen X/Y-Abstand Share View - Share View + Ansicht teilen @@ -7257,23 +7257,23 @@ mit dem vorgegebenen X/Y-Abstand Select View - Select View + Ansicht auswählen Select From Page. - Select From Page. + Ausgangsseite auswählen. Select Page - Select Page + Seite auswählen Select To Page. - Select To Page. + Zielseite auswählen. diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index f6091b5a6f..af98d06bb5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Εσφαλμένη επιλογή @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Εσφαλμένη Επιλογή @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Εξαγωγή Σελίδας ως SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Εξαρτήσεις αντικειμένου @@ -5116,47 +5116,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Στοιχεία - + Orientation Προσανατολισμός - + Top to Bottom line Top to Bottom line - + Vertical Vertical - + Left to Right line Left to Right line - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5167,92 +5167,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Περιστρέψτε - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm χιλιοστά - + Color Χρώμα - + Weight Weight - + Style Τύπος μορφοποίησης - + Continuous Continuous - + Dash Παύλα - + Dot Τελεία - + DashDot Παύλα-Τελεία - + DashDotDot Παύλα-Τελεία-Τελεία @@ -5260,38 +5260,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5368,312 +5368,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Συμμετρία - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Ακτίνα - + Diameter Διάμετρος - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Τετράγωνο - + Angles Angles - + Degree Βαθμός - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Άλλο - + Taper Taper - + Slope Slope - + Counterbore Κυλινδρική διεύρυνση οπής - + Countersink Κωνική διεύρυνση οπής - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Προεπισκόπηση: @@ -5686,68 +5686,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Ακτίνα - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5758,37 +5758,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Σελίδα - + Automatic Αυτόματη - + Custom Επιλογή - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Αναφορά - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index 649dbcbb50..4deea77564 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -1857,8 +1857,8 @@ Crear vista de hoja de cálculo - + Save page to dxf Guardar página como dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selección incorrecta @@ -2596,9 +2596,6 @@ La arista seleccionada es un BSpline. El radio será aproximado. ¿Continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selección Incorrecta @@ -2707,11 +2707,6 @@ Ninguna Operación asociada a una Forma en la selección. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportar página como SVG + - Are you sure you want to continue? ¿Estás seguro/a de que quieres continuar? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. tiene un símbolo de soldadura que se rompería. - + - - - + + + Object dependencies Dependencias del objeto @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Línea Centro - + Base View Vista Base - + Elements Elementos - + Orientation Orientación - + Top to Bottom line Línea de Arriba a Abajo - + Vertical Vertical - + Left to Right line Línea de Izquierda a Derecha - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - puntos: en igual distancia a los puntos - + Aligned Alineado - + Shift Horizontal Desplazamiento Horizontal - + Move line -Left or +Right Mover línea -Izquierda o +Derecha - + Shift Vertical Desplazamiento Vertical - + Move line +Up or -Down Mover línea +Arriba o -Abajo - + Rotate Rotar - + Rotate line +CCW or -CW Rotar línea +AH o -H - + Extend By Extender Por - + Make the line a little longer. Hacer la línea un poco más larga. - + mm mm - + Color Color - + Weight Peso - + Style Estilo - + Continuous Continua - + Dash Guión - + Dot Punto - + DashDot GuiónPunto - + DashDotDot GuiónPuntoPunto @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vértice Adicional - + Base View Vista Base - + Point Picker Selector de puntos - + Position from the view center Posición desde el centro de vista - + Position Posición - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Símbolos de Formato - + GD&T GD&T - + Straightness Rectitud - + Flatness Planicidad - + Circularity Redondez - + Cylindricity Cilindricidad - + Parallelism Paralelismo - + Perpendicularity Perpendicularidad - + Angularity Inclinación - + Profile of a line Perfil de una línea - + Profile of a surface Perfil de una superficie - + Circular runout Oscilación circular - + Total runout Oscilación total - + Position Posición - + Concentricity Concentricidad - + Symmetry Simetría - + Modifiers Modificadores - + derived geometry element Elemento derivado de la geometría - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Condición envolvente - + Free state Estado libre - + Least square geometry element Elemento geométrico de mínimos cuadrados - + Least material condition (LMC) Condición de mínimo material (LMC) - + Maximum material condition (MMC) Condición de máximo material (MMC) - + least inscribed geometry element elemento de geometría menos circunscrito - + Projected tolerance zone Zona de tolerancia proyectada - + Reciprocity condition Condición de reciprocidad - + Regardless of feature size (RFS) Independientemente de la función de tamaño (RFS) - + Tangent plane Plano tangente - + Unequal Bilateral Unilateral - + most inscribed geometry element elemento de geometría más inscrito - + Radius & Diameter Radio y diámetro - + Radius Radio - + Diameter Diámetro - + Radius of sphere Radio de esfera - + Diameter of sphere Diámetro de esfera - + Square Cuadrado - + Angles Ángulos - + Degree Grado - + (Arc) Minute (Arco) Minuto - + (Arc) Second (Arco) Segundo - + (Arc) Tertie (Arc) Tertie - + Other Otro - + Taper Afilar - + Slope Pendiente - + Counterbore Avellanado T - + Countersink Avellanado Y - + Plus - Minus Más - Menos - + Centerline Líneacentro - + Left/right arrow Flecha izquierda/derecha - + Downward arrow Flecha hacia abajo - + Multiplication sign Signo multiplicador - + Greek Letters Letras griegas - + Capital delta Delta mayúscula - + Capital sigma Sigma mayúscula - + Capital omega Omega mayúscula - + Small mu Mu pequeño - + Small sigma Sigma pequeña - + Small phi Fi pequeño - + Small omega Pequeño omega - + Format: Formato: - + Preview: Vista previa: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detalle Anclaje - + Base View Vista Base - + Detail View Vista Detalle - + Click to drag detail highlight to new position Haga clic para arrastrar el detalle resaltado a una nueva posición - + Drag Highlight Arrastrar Resaltado - + X X - + x position of detail highlight within view posición x del detalle resaltado dentro de la vista - + Y Y - + y position of detail highlight within view posición y del detalle resaltado dentro de la vista - + Radius Radio - + size of detail view tamaño de la vista de detalle - + Scale Type Tipo de Escala - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automático: si la vista de detalle es mayor que la página, Personalizado: se utiliza el factor de escala personalizado - + Page Página - + Automatic Automático - + Custom Personalizado - + Scale Factor Factor de Escala - + scale factor for detail view factor de escala para vista de detalle - + Reference Referencia - + reference label etiqueta de referencia diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index b5788ed01d..b7b6a5b81f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -1857,8 +1857,8 @@ Crear vista de hoja de cálculo - + Save page to dxf Guardar página como dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selección incorrecta @@ -2596,9 +2596,6 @@ El borde seleccionado es un BSpline. El dadio será aproximado. ¿Continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selección incorrecta @@ -2707,11 +2707,6 @@ No hay ninguna operación asociada a una Forma en la selección. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportar página como SVG + - Are you sure you want to continue? ¿Está seguro de que desea continuar? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. tiene un símbolo de soldadura que se rompería. - + - - - + + + Object dependencies Dependencias del objeto @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Línea Central - + Base View Vista base - + Elements Elementos - + Orientation Orientación - + Top to Bottom line Línea de arriba a abajo - + Vertical Vertical - + Left to Right line Línea de Izquierda a Derecha - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - puntos: en igual distancia a los puntos - + Aligned Alineado - + Shift Horizontal Desplazamiento Horizontal - + Move line -Left or +Right Mover línea -Izquierda o +Derecha - + Shift Vertical Desplazamiento Vertical - + Move line +Up or -Down Mover línea +Arriba o -Abajo - + Rotate Girar - + Rotate line +CCW or -CW Rotar línea +CCW o -CW - + Extend By Extender Por - + Make the line a little longer. Hacer la línea un poco más larga. - + mm mm - + Color Color - + Weight Peso - + Style Estilo - + Continuous Continuo - + Dash Tablero - + Dot Punto - + DashDot DashDot - + DashDotDot DashDotDot @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vértice cosmético - + Base View Vista base - + Point Picker Selector de puntos - + Position from the view center Posición desde el centro de vista - + Position Posición - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Aplanado - + Circularity Circularidad - + Cylindricity Cilindricidad - + Parallelism Paralelismo - + Perpendicularity Perpendicularidad - + Angularity Angularidad - + Profile of a line Perfil de una línea - + Profile of a surface Perfil de una superficie - + Circular runout Expiración circular - + Total runout Expiración total - + Position Posición - + Concentricity Concentricidad - + Symmetry Simetría - + Modifiers Modificadores - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Condición del casco - + Free state Estado libre - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Condición máxima de material (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Zona de tolerancia proyectada - + Reciprocity condition Condición de reciprocidad - + Regardless of feature size (RFS) Independientemente del tamaño de la característica (RFS) - + Tangent plane Plano tangencial - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radio & diámetro - + Radius Radio - + Diameter Diámetro - + Radius of sphere Radio de la esfera - + Diameter of sphere Diámetro de la esfera - + Square Cuadrado - + Angles Ángulos - + Degree Grado - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Otros - + Taper Afilar - + Slope Pendiente - + Counterbore Cajeado - + Countersink Avellanado - + Plus - Minus Más - menos - + Centerline Línea Central - + Left/right arrow Flecha izquierda/derecha - + Downward arrow Flecha hacia abajo - + Multiplication sign Signo de multiplicación - + Greek Letters Letras griegas - + Capital delta Delta mayúscula - + Capital sigma Sigma mayúscula - + Capital omega Omega mayúscula - + Small mu Mu pequeño - + Small sigma Sigma pequeña - + Small phi Fi pequeño - + Small omega Omega pequeña - + Format: Formato: - + Preview: Vista previa: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Anclar Detalle - + Base View Vista base - + Detail View Vista de Detalle - + Click to drag detail highlight to new position Haga clic para arrastrar el detalle resaltado a una nueva posición - + Drag Highlight Arrastrar Resaltado - + X X - + x position of detail highlight within view Posición x del detalle resaltado dentro de la vista - + Y Y - + y position of detail highlight within view Posición y del detalle resaltado dentro de la vista - + Radius Radio - + size of detail view tamaño de la vista de detalle - + Scale Type Tipo de Escala - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automático: si la vista de detalle es mayor que la página, Personalizado: se utiliza el factor de escala personalizado - + Page Página - + Automatic Automatico - + Custom Personalizado - + Scale Factor Factor de Escala - + scale factor for detail view factor de escala para vista detallada - + Reference Referencia - + reference label etiqueta de referencia diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm index eb75bf680f..bc92705f32 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index c893b75e37..a7054b04b4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -395,12 +395,12 @@ Calculate the area of selected faces - Calculate the area of selected faces + Kalkulatu hautatutako aurpegien area Select several faces<br> - click this tool - Select several faces<br> - click this tool + Hautatu aurpegi anitz<br> - egin klik tresna honetan @@ -413,7 +413,7 @@ Cascade Horizontal Dimensions - Cascade Horizontal Dimensions + Teilakatzearen kota horizontalak @@ -432,7 +432,7 @@ Cascade Horizontal Dimensions - Cascade Horizontal Dimensions + Teilakatzearen kota horizontalak @@ -452,7 +452,7 @@ Cascade Oblique Dimensions - Cascade Oblique Dimensions + Teilakatzearen zeharkako kotak @@ -472,7 +472,7 @@ Cascade Vertical Dimensions - Cascade Vertical Dimensions + Teilakatzearen kota bertikalak @@ -509,7 +509,7 @@ Change Line Attributes - Change Line Attributes + Aldatu lerro-atributuak @@ -528,7 +528,7 @@ Add Circle Centerlines - Add Circle Centerlines + Gehitu zirkuluaren erdiko lerroak @@ -547,7 +547,7 @@ Add Circle Centerlines - Add Circle Centerlines + Gehitu zirkuluaren erdiko lerroak @@ -779,7 +779,7 @@ Customize Format Label - Customize Format Label + Pertsonalizatu etiketen formatua @@ -798,7 +798,7 @@ Decrease Decimal Places - Decrease Decimal Places + Gutxitu dezimalak @@ -1857,8 +1857,8 @@ Sortu kalkulu-orriaren bista - + Save page to dxf Gorde orria DXF fitxategi batean @@ -1977,7 +1977,7 @@ Edit SectionView - Edit SectionView + Editatu sekzio-bista @@ -2117,7 +2117,7 @@ Change Line Attributes - Change Line Attributes + Aldatu lerro-atributuak @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Hautapen okerra @@ -2596,9 +2596,6 @@ Hautatutako ertza BSpline bat da. Erradioa gutxi gorabeherakoa izango da. Jarraitu? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Hautapen okerra @@ -2707,11 +2707,6 @@ Ez dago formarik duen elementurik hautapenean. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Esportatu orrialdea SVG gisa + - Are you sure you want to continue? Ziur zaude jarraitu nahi duzula? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. hautsi daitekeen soldadura-ikur bat duelako. - + - - - + + + Object dependencies Objektuaren mendekotasunak @@ -5116,47 +5116,47 @@ Jarraitu nahi duzu? TechDrawGui::TaskCenterLine - + Center Line Erdiko lerroa - + Base View Oinarrizko bista - + Elements Elementuak - + Orientation Orientazioa - + Top to Bottom line Goitik beherako lerroa - + Vertical Bertikala - + Left to Right line Ezkerretik eskuinerako lerroa - + Horizontal Horizontala - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5167,92 +5167,92 @@ Jarraitu nahi duzu? - puntuak: puntuekiko distantzia berean - + Aligned Lerrokatua - + Shift Horizontal Desplazatu horizontalean - + Move line -Left or +Right Mugitu lerroa ezkerrera edo eskuinera - + Shift Vertical Desplazatu bertikalean - + Move line +Up or -Down Mugitu lerroa gora edo behera - + Rotate Biratu - + Rotate line +CCW or -CW Biratu lerroa +CCW edo -CW - + Extend By Luzatu honela: - + Make the line a little longer. Luzatu lerroa pixka bat. - + mm mm - + Color Kolorea - + Weight Pisua - + Style Estiloa - + Continuous Jarraia - + Dash Marra - + Dot Puntua - + DashDot MarraPuntua - + DashDotDot MarraPuntuaPuntua @@ -5260,38 +5260,38 @@ Jarraitu nahi duzu? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Erpin kosmetikoa - + Base View Oinarrizko bista - + Point Picker Puntuen aukeratzailea - + Position from the view center Posizioa bistaren erditik - + Position Posizioa - + X X - + Y Y @@ -5368,312 +5368,312 @@ Jarraitu nahi duzu? TechDrawGui::TaskCustomizeFormat - + Format Symbols - Format Symbols + Formatu-ikurrak - + GD&T - GD&T + GD&T - + Straightness Zuzentasuna - + Flatness Lautasuna - + Circularity Zirkulartasuna - + Cylindricity Zilindrotasuna - + Parallelism Paralelismoa - + Perpendicularity Perpendikulartasuna - + Angularity Angulartasuna - + Profile of a line Lerro baten profila - + Profile of a surface Gainazal baten profila - + Circular runout Circular runout - + Total runout Total runout - + Position Posizioa - + Concentricity Concentricity - + Symmetry Simetria - + Modifiers Aldatzaileak - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Egoera librea - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Erradioa eta diametroa - + Radius Erradioa - + Diameter Diametroa - + Radius of sphere Esferaren erradioa - + Diameter of sphere Esferaren diametroa - + Square Laukia - + Angles Angeluak - + Degree Gradua - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Beste bat - + Taper Konoa - + Slope Malda - + Counterbore Abeilanatzaile zilindrikoa - + Countersink Abeilanatzaile konikoa - + Plus - Minus Plus - Minus - + Centerline Erdiko lerroa - + Left/right arrow Ezkerreko/eskuineko gezia - + Downward arrow Downward arrow - + Multiplication sign Biderketa-ikurra - + Greek Letters - Greek Letters + Letra greziarrak - + Capital delta - Capital delta + Delta maiuskula - + Capital sigma Sigma maiuskula - + Capital omega Omega maiuskula - + Small mu Mu minuskula - + Small sigma Sigma minuskula - + Small phi Phi minuskula - + Small omega Omega minuskula - + Format: Formatua: - + Preview: Aurrebista: @@ -5686,68 +5686,68 @@ Jarraitu nahi duzu? TechDrawGui::TaskDetail - + Detail Anchor Xehetasun-aingura - + Base View Oinarrizko bista - + Detail View Bista xehea - + Click to drag detail highlight to new position Egin klik xehetasunaren nabarmentzea posizio berrira arrastatzeko - + Drag Highlight Arrastatu nabarmentzea - + X X - + x position of detail highlight within view Xehetasun nabarmenduak bistaren baitan duen X posizioa - + Y Y - + y position of detail highlight within view Xehetasun nabarmenduak bistaren baitan duen Y posizioa - + Radius Erradioa - + size of detail view bista xehearen tamaina - + Scale Type Eskala mota - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5758,37 +5758,37 @@ Automatikoa: bista xehea orria baino handiagoa bada, Pertsonalizatua: eskala-faktore pertsonalizatua erabiliko da - + Page Orrialdea - + Automatic Automatikoa - + Custom Pertsonalizatua - + Scale Factor Eskala-faktorea - + scale factor for detail view bista xehearen eskala-faktorea - + Reference Erreferentzia - + reference label erreferentzia-etiketa @@ -6012,7 +6012,7 @@ edukia erabiliko da kota-balioaren ordez Use selection - Use selection + Erabili hautapena @@ -6262,12 +6262,12 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. Edit points - Edit points + Editatu puntuak Edit Points - Edit Points + Editatu puntuak @@ -6278,7 +6278,7 @@ Puntu gehiago ere aukeratu daitezke lerro segmentuak sortzeko. Save Points - Save Points + Gorde puntuak @@ -6979,7 +6979,7 @@ emandako X/Y espazioa erabilita Set line style to solid - Set line style to solid + Ezarri lerro-estilo solidoa @@ -7009,17 +7009,17 @@ emandako X/Y espazioa erabilita Thin 0,18 - Thin 0,18 + Mehea 0,18 Middle 0,35 - Middle 0,35 + Ertaina 0,35 Thick 0,70 - Thick 0,70 + Lodia 0,70 @@ -7069,17 +7069,17 @@ emandako X/Y espazioa erabilita Cascade spacing - Cascade spacing + Teilakatzearen tartea Delta distance - Delta distance + Delta-distantzia Select line attributes - Select line attributes + Hautatu lerro-atributuak @@ -7201,38 +7201,38 @@ emandako X/Y espazioa erabilita Move a View to a new Page - Move a View to a new Page + Eraman bista bat orrialde berri batera Move View to a different Page - Move View to a different Page + Eraman bista beste orrialde batera Select View to move from list. - Select View to move from list. + Hautatu lekuz aldatuko den bista zerrendan. Select View - Select View + Hautatu bista Select From Page. - Select From Page. + Hautatu jatorrizko orrialdea. Select Page - Select Page + Hautatu orrialdea Select To Page. - Select To Page. + Hautatu helburuko orrialdea. @@ -7248,48 +7248,48 @@ emandako X/Y espazioa erabilita Share View - Share View + Partekatu bista Share a View on a second Page - Share a View on a second Page + Partekatu bista bat bigarren orrialde batean Share View with another Page - Share View with another Page + Partekatu bista beste orrialde batekin View to share - View to share + Partekatuko den bista Select View to share from list. - Select View to share from list. + Hautatu partekatuko den bista zerrendan. Select View - Select View + Hautatu bista Select From Page. - Select From Page. + Hautatu jatorrizko orrialdea. Select Page - Select Page + Hautatu orrialdea Select To Page. - Select To Page. + Hautatu helburuko orrialdea. @@ -7310,7 +7310,7 @@ emandako X/Y espazioa erabilita Extensions: Attributes/Modifications - Extensions: Attributes/Modifications + Hedapenak: Atributuak/Aldaketak @@ -7321,7 +7321,7 @@ emandako X/Y espazioa erabilita Extensions: Dimensions - Extensions: Dimensions + Hedapenak: Kotak @@ -7366,7 +7366,7 @@ emandako X/Y espazioa erabilita TechDraw Tool Attributes - TechDraw Tool Attributes + TechDraw tresna-atributuak diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 437f3920b8..8c07e7c336 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -1857,8 +1857,8 @@ Luo laskentataulukko näkymä - + Save page to dxf Tallenna sivu dxf: ään @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Virheellinen valinta @@ -2596,9 +2596,6 @@ Valittu reuna on BSpline, joten säteestä ei tule tarkkaa. Jatketaanko? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Virheellinen valinta @@ -2707,11 +2707,6 @@ Valinnassa ei ole Piirrettä joka sisältää Muodon. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Vie sivu SVG-tiedostoon + - Are you sure you want to continue? Oletko varma että haluat jatkaa? @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. Tätä Reittiviivaa ei voi poistaa, koska siihen on liitetty hitsaussymboli, joka rikkoutuisi. - + - - - + + + Object dependencies Kohteiden riippuvuudet @@ -5109,47 +5109,47 @@ Haluatko jatkaa? TechDrawGui::TaskCenterLine - + Center Line Keskilinja - + Base View Perusnäkymä - + Elements Osat - + Orientation Suunta - + Top to Bottom line Ylhäältä alas -viiva - + Vertical Pystysuora - + Left to Right line Vasemmalta oikealle -viiva - + Horizontal Vaakasuora - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5160,92 +5160,92 @@ Haluatko jatkaa? - pisteiden: yhtä kaukana molemmista pisteistä - + Aligned Tasattu - + Shift Horizontal Siirrä vaakatasossa - + Move line -Left or +Right Siirrä viivaa -vasen tai +oikea - + Shift Vertical Siirrä pystysuunnassa - + Move line +Up or -Down Siirrä viivaa +ylös tai -alas - + Rotate Pyöritä - + Rotate line +CCW or -CW Kierrä viivaa +vastapäivään tai -myötäpäivään - + Extend By Laajenna käyttäen - + Make the line a little longer. Tee viivasta hieman pidempi. - + mm mm - + Color Väri - + Weight Paksuus - + Style Tyyli - + Continuous Jatkuva - + Dash Katkoviiva - + Dot Pisteviiva - + DashDot Katkopisteviiva - + DashDotDot Katkopistepisteviiva @@ -5253,38 +5253,38 @@ Haluatko jatkaa? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Kosmeettinen apupiste - + Base View Perusnäkymä - + Point Picker Pisteiden valitsin - + Position from the view center Sijainti näkymän keskipisteeseen nähden - + Position Sijainti - + X X - + Y Y @@ -5361,312 +5361,312 @@ Haluatko jatkaa? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Sijainti - + Concentricity Concentricity - + Symmetry Symmetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Säde - + Diameter Halkaisija - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Neliö - + Angles Angles - + Degree Astetta - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Muu - + Taper Taper - + Slope Slope - + Counterbore Tasapohjaupotus - + Countersink Senkkikanta - + Plus - Minus Plus - Minus - + Centerline Keskilinja - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Esikatselu: @@ -5679,68 +5679,68 @@ Haluatko jatkaa? TechDrawGui::TaskDetail - + Detail Anchor Detaljinäkymän ankkuri - + Base View Perusnäkymä - + Detail View Detaljinäkymä - + Click to drag detail highlight to new position Napsauta hiirellä raahataksesi Detaljinäkymä uuteen paikkaan - + Drag Highlight Raahauksen korostus - + X X - + x position of detail highlight within view Detaljinäkymän korostuksen x-paikka Näkymässä - + Y Y - + y position of detail highlight within view Detaljinäkymän korostuksen y-paikka Näkymässä - + Radius Säde - + size of detail view Detaljinäkymän koko - + Scale Type Skaalauksen tyyppi - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5751,37 +5751,37 @@ Automaattinen: jos Detaljinäkymä on suurempi kuin sivu, Mukautettu: käytetään mukautettua skaalauskerrointa - + Page Sivu - + Automatic Automaattinen - + Custom Mukautettu - + Scale Factor Skaalauskerroin - + scale factor for detail view Detaljinäkymän skaalauskerroin - + Reference Viittaus - + reference label viitenimike diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts index 62571243bf..d9714be19d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Maling pagpili @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Maling Pagpipilian @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ I-luwas pahina ng SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Dependencies ng object @@ -5118,47 +5118,47 @@ Taluhaba TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Elemento - + Orientation Oryentasyon - + Top to Bottom line Top to Bottom line - + Vertical Vertical - + Left to Right line Left to Right line - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5169,92 +5169,92 @@ Taluhaba - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate I-ikot - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm mm - + Color Kolor - + Weight Weight - + Style Estilo - + Continuous Continuous - + Dash Dash - + Dot Dot - + DashDot DashDot - + DashDotDot DashDotDot @@ -5262,38 +5262,38 @@ Taluhaba TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X Exis - + Y Y @@ -5370,312 +5370,312 @@ Taluhaba TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Symmetry - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog - + Diameter Diyametro - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kuwadrado - + Angles Angles - + Degree Antas - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Iba pa - + Taper Taper - + Slope Slope - + Counterbore Counterbore - + Countersink Countersink - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Preview: @@ -5688,68 +5688,68 @@ Taluhaba TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X Exis - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5760,37 +5760,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Pahina - + Automatic Kusa - + Custom Custom - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Reference - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index b636110eb8..79840c35fc 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index bd77835dfd..08cd55a302 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -1857,8 +1857,8 @@ Créer une vue de feuille de calcul - + Save page to dxf Enregistrer la page en dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Sélection non valide @@ -2597,9 +2597,6 @@ Le bord sélectionné est un BSpline. Le rayon sera approximatif. Continuer ? - - - @@ -2609,6 +2606,9 @@ + + + Incorrect Selection Sélection non valide @@ -2616,12 +2616,12 @@ BSpline Curve Error - BSpline Curve Error + Erreur de Courbe BSpline Selected edge is a BSpline and a radius can not be calculated. - Selected edge is a BSpline and a radius can not be calculated. + L'arête sélectionnée est une BSpline, un rayon ne peut pas être calculé. @@ -2636,27 +2636,27 @@ Selected edge is a BSpline and a diameter can not be calculated. - Selected edge is a BSpline and a diameter can not be calculated. + L'arête sélectionnée est une BSpline, un diamètre ne peut pas être calculé. Selection for Diameter does not contain a circular edge (edge type: %1) - Selection for Diameter does not contain a circular edge (edge type: %1) + La sélection pour le diamètre ne contient pas d'arête circulaire (type d'arête : %1) Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Distance Dimension - Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Distance Dimension + Il faut 2 sommets, 2 arêtes ou 1 sommet et 1 arête pour la cote de distance Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Horizontal Dimension - Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Horizontal Dimension + Il faut 2 sommets, 2 arêtes ou 1 sommet et 1 arête pour la cote horizontale Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Vertical Dimension - Need 2 Vertexes, 2 Edges or 1 Vertex and 1 Edge for Vertical Dimension + Il faut 2 sommets, 2 arêtes ou 1 sommet et 1 arête pour la cote verticale @@ -2708,11 +2708,6 @@ Aucune objet avec une forme dans la sélection. - - - - - @@ -2728,6 +2723,11 @@ + + + + + @@ -2744,14 +2744,9 @@ Selection for Radius does not contain a circular edge (edge type: %1) - Selection for Radius does not contain a circular edge (edge type: %1) + La sélection pour le rayon ne contient pas d'arête circulaire (type d'arête : %1) - - - - - @@ -2767,6 +2762,11 @@ + + + + + @@ -2925,12 +2925,12 @@ No Part View in Selection - No Part View in Selection + Pas de vue de la pièce dans la sélection No %1 in Selection - No %1 in Selection + %1 n'est pas dans la sélection @@ -3010,9 +3010,9 @@ Exporter la page au format SVG + - Are you sure you want to continue? Êtes-vous sûr de vouloir continuer ? @@ -3228,7 +3228,7 @@ Please select a Line Group - Please select a Line Group + Veuillez sélectionner un Groupe de lignes @@ -3236,10 +3236,10 @@ thin: %2 graphic: %3 thick: %4 - %1 defines these line widths: - thin: %2 - graphic: %3 - thick: %4 + %1 définit ces largeurs de ligne : + mince : %2 + graphique : %3 + épais : %4 @@ -3252,19 +3252,19 @@ it has a weld symbol that would become broken. elle a un symbole de soudure qui serait cassé. - + - - - + + + Object dependencies Dépendances des objets @@ -5108,47 +5108,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Ligne centrale - + Base View Vue de base - + Elements Éléments - + Orientation Orientation - + Top to Bottom line Ligne de haut en bas - + Vertical Vertical - + Left to Right line Ligne de gauche à droite - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5159,92 +5159,92 @@ Do you want to continue? - points : à égale distance des deux points - + Aligned Aligné - + Shift Horizontal Décalage horizontal - + Move line -Left or +Right Déplacer la ligne -Gauche ou +Droite - + Shift Vertical Décalage vertical - + Move line +Up or -Down Déplacer la ligne +Haut ou -Bas - + Rotate Pivoter - + Rotate line +CCW or -CW Faire pivoter la ligne +CCW ou -CW - + Extend By Étendre de - + Make the line a little longer. Rendre la ligne un peu plus longue. - + mm mm - + Color Couleur - + Weight Poids - + Style Style - + Continuous Continue - + Dash Tiret - + Dot Point - + DashDot Tiret point - + DashDotDot Tiret point point @@ -5252,38 +5252,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Sommet Cosmétique - + Base View Vue de base - + Point Picker Sélectionneur de Point - + Position from the view center Position par rapport à la vue de face - + Position Position - + X X - + Y Y @@ -5301,7 +5301,7 @@ Do you want to continue? Escape picking - Escape picking + Annuler la sélection @@ -5360,312 +5360,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Formater les symboles - + GD&T Dimensionnement géométrique et tolérance - + Straightness Rectitude - + Flatness Planéité - + Circularity Rondité - + Cylindricity Cylindricité - + Parallelism Parallélisme - + Perpendicularity Perpendicularité - + Angularity Angularité - + Profile of a line Profil d'une ligne - + Profile of a surface Profil d'une surface - + Circular runout Battement circulaire - + Total runout Battement total - + Position Position - + Concentricity Concentricité - + Symmetry Symétrie - + Modifiers Modificateurs - + derived geometry element élément géométrique dérivé - + Minimax (Tschebyschew) Minimax (Tchebychev) - + Hull condition État de l'enveloppe - + Free state État libre - + Least square geometry element Élément de géométrie des moindres carrés - + Least material condition (LMC) État au minimum de matière (LMC) - + Maximum material condition (MMC) État au maximum de matière (MMC) - + least inscribed geometry element élément de géométrie le moins inscrit - + Projected tolerance zone Zone de tolérance projetée - + Reciprocity condition Condition de réciprocité - + Regardless of feature size (RFS) Indépendamment des dimensions de l’élément (RFS) - + Tangent plane Plan tangent - + Unequal Bilateral Profil inégalement disposé - + most inscribed geometry element élément géométrique le plus inscrit - + Radius & Diameter Rayon & Diamètre - + Radius Rayon - + Diameter Diamètre - + Radius of sphere Rayon de la sphère - + Diameter of sphere Diamètre de la sphère - + Square Carré - + Angles Angles - + Degree Degré - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Seconde - + (Arc) Tertie (Arc) Tertie - + Other Autre - + Taper Conique - + Slope Pente - + Counterbore Chambrage - + Countersink Fraisage - + Plus - Minus Plus - Moins - + Centerline Ligne centrale - + Left/right arrow Flèche gauche/droite - + Downward arrow Flèche vers le bas - + Multiplication sign Signe de la multiplication - + Greek Letters Lettres grecques - + Capital delta Delta en capitale - + Capital sigma Sigma en capitale - + Capital omega Oméga en capitale - + Small mu Mu en minuscule - + Small sigma Sigma en minuscule - + Small phi Phi en minuscule - + Small omega Oméga en minuscule - + Format: Format : - + Preview: Aperçu : @@ -5678,68 +5678,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Ancrage de vue détaillée - + Base View Vue de base - + Detail View Vue détaillée - + Click to drag detail highlight to new position Cliquez pour déplacer la vue de détail vers une nouvelle position - + Drag Highlight Déplacer la vue de détail - + X X - + x position of detail highlight within view Position x de la mise en évidence des détails dans la vue - + Y Y - + y position of detail highlight within view Position y de la mise en évidence des détails dans la vue - + Radius Rayon - + size of detail view taille de la vue détaillée - + Scale Type Type d'Échelle - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5749,37 +5749,37 @@ Automatique : si la vue de détail est plus grande que la page, elle sera redime Personnalisé : un facteur d'échelle personnalisé est utilisé - + Page Feuille - + Automatic Automatique - + Custom Personnalisée - + Scale Factor Facteur d’Échelle - + scale factor for detail view facteur d'échelle pour la vue détaillée - + Reference Référence - + reference label label de référence @@ -7194,17 +7194,17 @@ en utilisant l'espacement X/Y donné Move a View to a new Page - Move a View to a new Page + Déplacer une vue vers une nouvelle page Move View to a different Page - Move View to a different Page + Déplacer la vue vers une autre page Select View to move from list. - Select View to move from list. + Sélectionnez la vue à déplacer depuis la liste. diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index 880c39ea9a..e0d885fc80 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selección incorrecta @@ -2596,9 +2596,6 @@ O bordo escolmado é unha BSpline. O Radio será aproximado. Dámoslle? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selección Incorrecta @@ -2707,11 +2707,6 @@ Non hai característica con forma na escolma. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exporta páxina como SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Dependencias do obxecto @@ -5116,47 +5116,47 @@ Quere seguir? TechDrawGui::TaskCenterLine - + Center Line Centro da Liña - + Base View Vista Base - + Elements Elementos - + Orientation Orientación - + Top to Bottom line Top to Bottom line - + Vertical Vertical - + Left to Right line Left to Right line - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5167,92 +5167,92 @@ Quere seguir? - points: in equal distance to the points - + Aligned Aliñar - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Xirar - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Estender Por - + Make the line a little longer. Fai unha fila un pouco máis longa. - + mm mm - + Color Cor - + Weight Peso - + Style Estilo - + Continuous Continuo - + Dash Trazo - + Dot Punto - + DashDot TrazoPunto - + DashDotDot TrazoPuntoPunto @@ -5260,38 +5260,38 @@ Quere seguir? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vértice cosmético - + Base View Vista Base - + Point Picker Recolledor de Puntos - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5368,312 +5368,312 @@ Quere seguir? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetría - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Radio - + Diameter Diámetro - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Cadrado - + Angles Angles - + Degree Grao - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Outros - + Taper Cónico - + Slope Pendente - + Counterbore Abelanador cilíndrico - + Countersink Abelanador - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Vista previa: @@ -5686,68 +5686,68 @@ Quere seguir? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Vista Base - + Detail View Visualización detallada - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Radio - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5758,37 +5758,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Páxina - + Automatic Automática - + Custom Personalizar - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Referencia - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 7c4d0f32ab..ce17dee777 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -1859,8 +1859,8 @@ Stvori pogled pregleda - + Save page to dxf Spremi stranicu u dxf formatu @@ -2450,14 +2450,14 @@ - - - + + + Incorrect selection Netočan odabir @@ -2599,9 +2599,6 @@ Odabrani rub je BSpline. Polumjer će biti približan. Nastaviti? - - - @@ -2611,6 +2608,9 @@ + + + Incorrect Selection Netočan odabir @@ -2710,11 +2710,6 @@ Nema Svojstva sa Oblikom u izboru. - - - - - @@ -2730,6 +2725,11 @@ + + + + + @@ -2749,11 +2749,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2769,6 +2764,11 @@ + + + + + @@ -3013,9 +3013,9 @@ Izvoz Stranice u SVG + - Are you sure you want to continue? Jeste li sigurni da želite nastaviti? @@ -3257,19 +3257,19 @@ ima simbol spajanja koji bi se pokidao. - + - - - + + + Object dependencies Zavisnosti objekta @@ -5181,47 +5181,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Točka Središta - + Base View Osnovni Pogled - + Elements Elementi - + Orientation Orijentacija - + Top to Bottom line Linija od gore na dolje - + Vertical Okomito - + Left to Right line Linija od lijevo na desno - + Horizontal Vodoravno - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5232,94 +5232,94 @@ Do you want to continue? - točke: na jednakoj udaljenosti od točaka - + Aligned Poravnavanje - + Shift Horizontal Pomakni vodoravno - + Move line -Left or +Right Pomicanje crte (-) Lijevo ili (+) Desno - + Shift Vertical Pomakni okomito - + Move line +Up or -Down Pomicanje crte (+) Gore ili (-) Dolje - + Rotate Rotiraj - + Rotate line +CCW or -CW Rotacija linije (+) CCW ili (-) CW (smjer kazaljke) - + Extend By Proširi sa - + Make the line a little longer. Napravite liniju malo duže. - + mm mm - + Color Boja - + Weight Važnost - + Style Stil - + Continuous Kontinuirano - + Dash Crtica - + Dot Točka - + DashDot Crtica Točka - + DashDotDot Crtica Točka Točka @@ -5327,40 +5327,40 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Pomoćna tjemena točka - + Base View Osnovni Pogled - + Point Picker Odabir Točke - + Position from the view center Položaj od središta pogleda - + Position Položaj - + X X - + Y Y @@ -5437,312 +5437,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Položaj - + Concentricity Concentricity - + Symmetry Simetrija - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Radijus - + Diameter Promjer - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kvadrat - + Angles Angles - + Degree Stupanj - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Drugo - + Taper Konus - + Slope Nagib - + Counterbore Upuštanje ravne rupe za glavu šarafa - + Countersink Upuštanje kose rupe za glavu šarafa - + Plus - Minus Plus - Minus - + Centerline Srednja linija - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Pregled: @@ -5755,68 +5755,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Sidrište detalja - + Base View Osnovni Pogled - + Detail View Detaljni pogled - + Click to drag detail highlight to new position Kliknite da biste povukli istaknuti detalj na novi položaj - + Drag Highlight Povuci istaknuti detalj - + X X - + x position of detail highlight within view x položaj istaknutog detalja u prikazu - + Y Y - + y position of detail highlight within view y položaj istaknutog detalja u prikazu - + Radius Radijus - + size of detail view veličina detaljnog pogleda - + Scale Type Vrsta skale veličine - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5827,37 +5827,37 @@ Automatski: ako je prikaz detalja veći od stranice, Prilagođeno: koristi se prilagođeni faktor razmjera - + Page Stranica - + Automatic Automatsko - + Custom Prilagođeno - + Scale Factor Faktor skale - + scale factor for detail view Faktor veličine za detaljni pogled - + Reference Referenca - + reference label oznaka reference diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index f347eb6eec..22b4517015 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -1857,8 +1857,8 @@ Számolótábla nézet létrehozása - + Save page to dxf Oldal mentése dxf-be @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Hibás kijelölés @@ -2596,9 +2596,6 @@ A kijelölt él egy folyamatos ív. A sugár hozzávetőleges érték lesz. Folytatja? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Hibás kijelölés @@ -2707,11 +2707,6 @@ Nincs alakzat tulajdonság a kiválasztásban. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Oldal export SVG formában + - Are you sure you want to continue? Biztosan folytatja? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. olyan hegesztési szimbólummal rendelkezik, amely megtörne. - + - - - + + + Object dependencies Objektumfüggőségek @@ -5115,47 +5115,47 @@ Szeretné folytatni? TechDrawGui::TaskCenterLine - + Center Line Közép vonal - + Base View Alap nézet - + Elements Elemek - + Orientation Tájolás - + Top to Bottom line Top to Bottom line - + Vertical Függőleges - + Left to Right line Left to Right line - + Horizontal Vízszintes - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Szeretné folytatni? - points: in equal distance to the points - + Aligned Igazított - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Forgatás - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Nyújt ennyivel - + Make the line a little longer. A vonalat kissé hosszabbá növeli. - + mm mm - + Color Szín - + Weight Súly - + Style Stílus - + Continuous Continuous - + Dash Szaggatott - + Dot Pont - + DashDot Pontvonal - + DashDotDot Kétpontvonal @@ -5259,38 +5259,38 @@ Szeretné folytatni? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Szépítő csúcsvégpont - + Base View Alap nézet - + Point Picker Pont kiválasztó - + Position from the view center Position from the view center - + Position Pozíció - + X X - + Y Y @@ -5367,312 +5367,312 @@ Szeretné folytatni? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Pozíció - + Concentricity Concentricity - + Symmetry Szimmetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Sugár - + Diameter Átmérő - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Négyzet - + Angles Angles - + Degree Fok - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Egyéb - + Taper Taper - + Slope Lejtő - + Counterbore Hengeres süllyesztés - + Countersink Kúpos süllyesztés - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Előnézet: @@ -5685,68 +5685,68 @@ Szeretné folytatni? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Alap nézet - + Detail View Részletnézet - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Sugár - + size of detail view részletnézet mérete - + Scale Type Lépték típusa - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Automatikus: ha a részletnézet nagyobb, mint az oldal, Egyedi: egyedi lépték használata - + Page Oldal - + Automatic Automatikus - + Custom Egyéni - + Scale Factor Lépték - + scale factor for detail view részletnézet léptéke - + Reference Referencia - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index 9e554ff40c..f0e4aada36 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Pilihan salah @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Seleksi yang salah @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Ekspor sebagai SVG + - Are you sure you want to continue? Apakah yakin ingin melanjutkan? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Objek dependensi @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Elemen - + Orientation Orientasi - + Top to Bottom line Top to Bottom line - + Vertical Vertical - + Left to Right line Left to Right line - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Putar - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm mm - + Color Warna - + Weight Weight - + Style Gaya - + Continuous Continuous - + Dash Berlari - + Dot Dot - + DashDot DashDot - + DashDotDot DashDotDot @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetri - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Jari-jari - + Diameter Diameter - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kotak - + Angles Angles - + Degree Gelar - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Lain - + Taper Taper - + Slope Slope - + Counterbore Counterbore - + Countersink Countersink - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Pratinjau: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Jari-jari - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Halaman - + Automatic Otomatis - + Custom Adat - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Referensi - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index c5299718d1..e1f9d299c9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -1859,8 +1859,8 @@ Crea vista foglio di calcolo - + Save page to dxf Salva pagina su dxf @@ -2450,14 +2450,14 @@ - - - + + + Incorrect selection Selezione non corretta @@ -2598,9 +2598,6 @@ Il bordo selezionato è una BSpline. Il raggio sarà approssimativo. Continuare? - - - @@ -2610,6 +2607,9 @@ + + + Incorrect Selection Selezione non corretta @@ -2709,11 +2709,6 @@ Nessun oggetto con una forma nella selezione. - - - - - @@ -2729,6 +2724,11 @@ + + + + + @@ -2748,11 +2748,6 @@ La selezione per il raggio non contiene un bordo circolare (tipo di bordo: %1) - - - - - @@ -2768,6 +2763,11 @@ + + + + + @@ -3011,9 +3011,9 @@ Esporta pagina in SVG + - Are you sure you want to continue? Sei sicuro di voler continuare? @@ -3253,19 +3253,19 @@ it has a weld symbol that would become broken. essa ha un simbolo di saldatura che si romperebbe. - + - - - + + + Object dependencies Dipendenze dell'oggetto @@ -5115,47 +5115,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Linea centrale - + Base View Vista base - + Elements Elementi - + Orientation Orientamento - + Top to Bottom line Dall'alto al basso - + Vertical Verticale - + Left to Right line Da sinistra a destra - + Horizontal Orizzontale - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Do you want to continue? - punti: a uguale distanza dai punti - + Aligned Allineata - + Shift Horizontal Scostamento orizzontale - + Move line -Left or +Right Sposta la linea - a sinistra o + a destra - + Shift Vertical Scostamento verticale - + Move line +Up or -Down Sposta la linea + in su o - in giù - + Rotate Ruota - + Rotate line +CCW or -CW Ruota la linea + in senso antiorario o - in senso orario - + Extend By Estesa per - + Make the line a little longer. Rende la linea un po' più lunga. - + mm mm - + Color Colore - + Weight Spessore - + Style Stile - + Continuous Continue - + Dash A tratti - + Dot Punto - + DashDot Tratto punto - + DashDotDot Tratto punto punto @@ -5259,38 +5259,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vertice cosmetico - + Base View Vista base - + Point Picker Selettore del punto - + Position from the view center Posizione dal centro della vista - + Position Posizione - + X X - + Y Y @@ -5367,312 +5367,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Formato Simboli - + GD&T GD&T - + Straightness Rettilineità - + Flatness Planarità - + Circularity Circolarità - + Cylindricity Cilindricità - + Parallelism Parallelismo - + Perpendicularity Perpendicolarità - + Angularity Angolarità - + Profile of a line Profilo di una linea - + Profile of a surface Profilo di una superficie - + Circular runout Circular runout - + Total runout Total runout - + Position Posizione - + Concentricity Concentricità - + Symmetry Simmetria - + Modifiers Modificatori - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Stato libero - + Least square geometry element Least square geometry element - + Least material condition (LMC) Condizione minima del materiale (LMC) - + Maximum material condition (MMC) Condizioni massime del materiale (MMC) - + least inscribed geometry element elemento geometrico meno inscritto - + Projected tolerance zone Zona di tolleranza proiettata - + Reciprocity condition Condizione di reciprocità - + Regardless of feature size (RFS) Indipendentemente dalla dimensione dell'elemento (RFS) - + Tangent plane Piano tangente - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element elemento geometrico più inscritto - + Radius & Diameter Raggio & Diametro - + Radius Raggio - + Diameter Diametro - + Radius of sphere Raggio della sfera - + Diameter of sphere Diametro della sfera - + Square Quadrato - + Angles Angoli - + Degree Grado - + (Arc) Minute (Arc) Primo - + (Arc) Second (Arc) Secondo - + (Arc) Tertie (Arc) Tertie - + Other Altro - + Taper Rastremato - + Slope Pendenza - + Counterbore Lamato - + Countersink Svasato - + Plus - Minus Plus - Minus - + Centerline Linea centrale - + Left/right arrow Freccia sinistra/destra - + Downward arrow Freccia verso il basso - + Multiplication sign Segno di moltiplicazione - + Greek Letters Lettere Greche - + Capital delta Delta maiuscola - + Capital sigma Sigma maiuscola - + Capital omega Omega maiuscola - + Small mu Mu minuscola - + Small sigma Sigma minuscola - + Small phi Phi minuscola - + Small omega Omega minuscola - + Format: Formato: - + Preview: Anteprima: @@ -5685,68 +5685,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Ancoraggio del dettaglio - + Base View Vista base - + Detail View Vista del dettaglio - + Click to drag detail highlight to new position Fare clic per trascinare i dettagli evidenziati in una nuova posizione - + Drag Highlight Trascina il dettaglio - + X X - + x position of detail highlight within view posizione x del dettaglio evidenziato nella vista - + Y Y - + y position of detail highlight within view posizione y del dettaglio evidenziato nella vista - + Radius Raggio - + size of detail view dimensione della vista di dettaglio - + Scale Type Tipo di scala - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Automatico: se la vista dei dettagli è più grande della pagina, Personalizzato: viene utilizzato il fattore di scala personalizzato - + Page Pagina - + Automatic Automatica - + Custom Personalizza - + Scale Factor Fattore di scala - + scale factor for detail view fattore di scala per la visualizzazione dei dettagli - + Reference Riferimento - + reference label etichetta di riferimento diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 5f6da5b48b..ccbf8b6544 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -1857,8 +1857,8 @@ スプレッドシートビューを作成 - + Save page to dxf ページをDXFに保存 @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection 誤った選択です。 @@ -2596,9 +2596,6 @@ 選択されたエッジはBスプラインです。半径は概算です。続けますか？ - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection 誤った選択です。 @@ -2707,11 +2707,6 @@ シェイプのあるフィーチャーが選択されていません。 - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ ページをSVGとしてエクスポート + - Are you sure you want to continue? 本当に続行しますか？ @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. 壊れてしまう溶接記号があるため、この引き出し線を削除することはできません。 - + - - - + + + Object dependencies オブジェクトの依存関係 @@ -5105,47 +5105,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line 中心線 - + Base View ベースビュー - + Elements 要素 - + Orientation 向き - + Top to Bottom line 上から下への線 - + Vertical 垂直方向 - + Left to Right line 左から右への線 - + Horizontal 水平方向 - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5155,92 +5155,92 @@ Do you want to continue? - 点間: 各点から等距離 - + Aligned 整列 - + Shift Horizontal 水平方向移動 - + Move line -Left or +Right マイナスで左、プラスで右に線を移動 - + Shift Vertical 垂直方向移動 - + Move line +Up or -Down プラスで上、マイナスで下に線を移動 - + Rotate 回転 - + Rotate line +CCW or -CW プラスで反時計回り、マイナスで時計回りに線を回転 - + Extend By 延長元 - + Make the line a little longer. 線を少し長くする。 - + mm mm - + Color 色 - + Weight 太さ - + Style スタイル - + Continuous 実線 - + Dash 破線 - + Dot 点 - + DashDot 一点鎖線 - + DashDotDot 二点鎖線 @@ -5248,38 +5248,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex 表示用の頂点 - + Base View ベースビュー - + Point Picker 点ピッカー - + Position from the view center ビュー中央からの位置 - + Position Position - + X X - + Y Y @@ -5356,312 +5356,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry 対称 - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius 半径 - + Diameter 直径 - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square 正方形 - + Angles Angles - + Degree 度 - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other その他 - + Taper テーパー - + Slope 傾斜 - + Counterbore カウンターボア - + Countersink 皿穴 - + Plus - Minus Plus - Minus - + Centerline 中心線 - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: プレビュー: @@ -5674,68 +5674,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor 詳細アンカー - + Base View ベースビュー - + Detail View 詳細ビュー - + Click to drag detail highlight to new position クリックして詳細注目位置を新しい位置にドラッグ - + Drag Highlight 注目位置をドラッグ - + X X - + x position of detail highlight within view ビュー内での詳細注目位置のX位置 - + Y Y - + y position of detail highlight within view ビュー内での詳細注目位置のY位置 - + Radius 半径 - + size of detail view 詳細ビューのサイズ - + Scale Type 拡大縮小タイプ - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5745,37 +5745,37 @@ Custom: custom scale factor is used カスタム: カスタムの拡大縮小率が使用されます。 - + Page ページ - + Automatic 自動 - + Custom カスタム - + Scale Factor 拡大縮小率 - + scale factor for detail view 詳細ビューの拡大縮小率 - + Reference 参照 - + reference label 参照ラベル diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index ce218af289..2eb57ab469 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -1857,8 +1857,8 @@ ელცხრილის შექმნა - + Save page to dxf გვერდის DXF-ში შენახვა @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection არასწორი არჩევანი @@ -2596,9 +2596,6 @@ მონიშნული წიბო B-სპლაინს წარმოადგენს. რადიუსი მხოლოდ დაახლოებითი იქნება. გავაგრძელო? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection არასწორი არჩევანი @@ -2707,11 +2707,6 @@ მონიშნულში მოხაზულობის მქონე თვისება არ არსებობს. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ გვერდის SVG ფაილად გატანა + - Are you sure you want to continue? დარწმუნებული ბრძანდებით, რომ გნებავთ გააგრძელოთ? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. რომ მას აქვს შედუღების ნიშანი, რომელიც გაფუჭდება. - + - - - + + + Object dependencies ობიექტის დამოკიდებულებები @@ -5115,47 +5115,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line ცენტრის ხაზი - + Base View საბაზისო ხედი - + Elements ელემენტები - + Orientation ორიენტაცია - + Top to Bottom line ხაზი ზემოდან ქვემოთ - + Vertical ვერტიკალურად - + Left to Right line ხაზი მარცხნიდან მარჯვნივ - + Horizontal ჰორიზონტალურად - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned გათანაბრებული - + Shift Horizontal ჰორიზონტალური წანაცვლება - + Move line -Left or +Right ხაზის -მარცხნივ ან +მარჯვნივ გაწევა - + Shift Vertical ვერტიკალური წანაცვლება - + Move line +Up or -Down ხაზის +მაღლა ან -დაბლა გადატანა - + Rotate შებრუნება - + Rotate line +CCW or -CW ხაზის მოტრიალება +სისმ ან -სიმ - + Extend By გაფართოება - + Make the line a little longer. ხაზის ოდნავ გაგრძელება. - + mm მმ - + Color ფერი - + Weight სისქე - + Style სტილი - + Continuous უწყვეტი - + Dash შტრიხი - + Dot წერტილი - + DashDot შტრიხპუნქტირი - + DashDotDot ტირე-წერტილის ხაზი 2 წერტილით @@ -5259,38 +5259,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex დამხმარე წვერო - + Base View საბაზისო ხედი - + Point Picker აირჩიეთ წერტილები - + Position from the view center პოზიცია ხედის ცენტრიდან - + Position Position - + X X - + Y Y @@ -5367,312 +5367,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols სიმბოლოების ფორმატი - + GD&T GD&T - + Straightness სისწორე - + Flatness სიბრტყელე - + Circularity სიმრგვალე - + Cylindricity ცილინდრულობა - + Parallelism პარალელიზმი - + Perpendicularity მართობულობა - + Angularity მაქსიმალური კუთხე - + Profile of a line ხაზის პროფილი - + Profile of a surface ზედაპირის პროფილი - + Circular runout წრიული გამოსვლა - + Total runout ჯამური გადაცილება - + Position Position - + Concentricity კონცენტრირებულობა - + Symmetry სიმეტრია - + Modifiers მოდიფიკატორი - + derived geometry element მიღებულ გეომეტრიული ელემენტი - + Minimax (Tschebyschew) მინიმაქსი (ჩებიშევი) - + Hull condition კორპუსის მდგომარეობა - + Free state თავისუფალი მდგომარეობა - + Least square geometry element ყველაზე ნაკლებად ოთხკუთხედი გეომეტრიული ელემენტი - + Least material condition (LMC) უმცირესი მასალის პირობა (LMC) - + Maximum material condition (MMC) ყველაზე მეტი მასალის პირობა (MMC) - + least inscribed geometry element ყველაზე იშვიათად ჩაწერილი გეომეტრიული ელემენტი - + Projected tolerance zone პროექციის სიზუსტის ზონა - + Reciprocity condition ორმხრივი პირობა - + Regardless of feature size (RFS) თვისების ზომის მიუხედავად (RFS) - + Tangent plane მხები სიბრტყე - + Unequal Bilateral არათანაბარი ორმხრივი - + most inscribed geometry element ყველაზე ხშირად ჩაწერილი გეომეტრიული ელემენტი - + Radius & Diameter რადიუსი & დიამეტრი - + Radius რადიუსი - + Diameter დიამეტრი - + Radius of sphere სფეროს რადიუსი - + Diameter of sphere სფეროს დიამეტრი - + Square კვადრატი - + Angles კუთხეები - + Degree გრადუსი - + (Arc) Minute (რკალი) მინუტი - + (Arc) Second (რკალი) სეკუნდი - + (Arc) Tertie (რკალი) მესამეული - + Other სხვა - + Taper შევიწროება - + Slope დახრა - + Counterbore მოტორსვა - + Countersink ჩაძირვა - + Plus - Minus პლუს - მინუს - + Centerline ღერძის ხაზი - + Left/right arrow მარცხენა/მარჯვენა ისარი - + Downward arrow დაბლა ისარი - + Multiplication sign გამრავლების ნიშანი - + Greek Letters ბერძნული ასოები - + Capital delta დიდი დელტა - + Capital sigma დიდი სიგმა - + Capital omega დიდი ომეგა - + Small mu მატარა მიუ - + Small sigma პატარა სიგმა - + Small phi პატარა ფი - + Small omega პატარა ომეგა - + Format: ფორმატი: - + Preview: მინიატურა: @@ -5685,68 +5685,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor დეტალური მიბმა - + Base View საბაზისო ხედი - + Detail View დეტალური ხედი - + Click to drag detail highlight to new position დეტალის გამოკვეთის გადასათრევად დააწკაპუნეთ - + Drag Highlight მონიშნულის გადათრევა - + X X - + x position of detail highlight within view ხედზე დეტალის გამოკვეთის X მდებარეობა - + Y Y - + y position of detail highlight within view ხედზე დეტალის გამოკვეთის Y მდებარეობა - + Radius რადიუსი - + size of detail view ნაწილის ხედის ზომა - + Scale Type მასშტაბირების ტიპი - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Custom: custom scale factor is used მორგება: იყენებს მორგებული მასშტაბირების ფაქტორს - + Page გვერდი - + Automatic ავტომატური - + Custom მომხმარებლის - + Scale Factor გადიდების კოეფიციენტი - + scale factor for detail view დეტალის ხედის მასშტაბის კოეფიციენტი - + Reference ბმა - + reference label ბმული ჭდე diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts index ae58c5a153..3e75a9d477 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Netinkamas pasirinkimas @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Netinkamas pasirinkimas @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Export page as SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Daikto priklausomybės @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Elementai - + Orientation Kampinė padėtis - + Top to Bottom line Top to Bottom line - + Vertical Stačiai - + Left to Right line Left to Right line - + Horizontal Gulščiai - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Vartyti - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm mm - + Color Spalva - + Weight Weight - + Style Stilius - + Continuous Continuous - + Dash Brūkšnelis - + Dot Taškas - + DashDot Brūkšnelis taškelis - + DashDotDot Brūkšnelis taškelis taškelis @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetrija - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Spindulys - + Diameter Diameter - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kvadratas - + Angles Angles - + Degree Eilė - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Kita - + Taper Taper - + Slope Slope - + Counterbore Counterbore - + Countersink Countersink - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Peržiūra: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Spindulys - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Puslapis - + Automatic Automatinis - + Custom Pasirinktinė - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Orientyras - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 27e2e4f1e1..a2373149f8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -1857,8 +1857,8 @@ Rekenbladweergave maken - + Save page to dxf Pagina in dxf opslaan @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Onjuiste selectie @@ -2596,9 +2596,6 @@ Geselecteerde rand is een BSpline. Straal zal approximatief zijn. Doorgaan? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Onjuiste Selectie @@ -2707,11 +2707,6 @@ Geen functie met Vorm in Selectie. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exporteren als SVG + - Are you sure you want to continue? Weet u zeker dat u wilt doorgaan? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. een Lassymbool heeft dat kapot zou gaan. - + - - - + + + Object dependencies Object afhankelijkheden @@ -5115,47 +5115,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Centrale lijn - + Base View Basisweergave - + Elements Elementen - + Orientation Oriëntatie - + Top to Bottom line Van bovenste naar onderste lijn - + Vertical Verticaal - + Left to Right line Van linker- naar rechterlijn - + Horizontal Horizontaal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Do you want to continue? - punten: op gelijke afstand tot de punten - + Aligned Uitgelijnd - + Shift Horizontal Horizontaal verschuiven - + Move line -Left or +Right Verplaats lijn -Links of +Rechts - + Shift Vertical Verticaal verschuiven - + Move line +Up or -Down Verplaats lijn +Omhoog of -Omlaag - + Rotate Draaien - + Rotate line +CCW or -CW Draai lijn +CCW of -CW - + Extend By Uitbreiden met - + Make the line a little longer. Maak de lijn een beetje langer. - + mm mm - + Color Kleur - + Weight Gewicht - + Style Stijl - + Continuous Doorlopend - + Dash Streep - + Dot punt - + DashDot Streepstip - + DashDotDot Streepstipstip @@ -5259,38 +5259,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetisch eindpunt - + Base View Basisweergave - + Point Picker Puntenkiezer - + Position from the view center Positie vanuit het weergavemiddelpunt - + Position Positie - + X X - + Y Y @@ -5367,312 +5367,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Positie - + Concentricity Concentricity - + Symmetry Symmetrie - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Straal - + Diameter Diameter - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Vierkant - + Angles Angles - + Degree Graden - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Andere - + Taper Conus - + Slope Helling - + Counterbore Verzinkboor - + Countersink Verzonken - + Plus - Minus Plus - Minus - + Centerline Middenlijn - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Voorbeeldweergave: @@ -5685,68 +5685,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detailanker - + Base View Basisweergave - + Detail View Gedetailleerde weergave - + Click to drag detail highlight to new position Klik om de detailmarkering naar een nieuwe positie te slepen - + Drag Highlight Sleep markering - + X X - + x position of detail highlight within view x-positie van de detailmarkering binnen de weergave - + Y Y - + y position of detail highlight within view y-positie van de detailmarkering binnen de weergave - + Radius Straal - + size of detail view grootte van detailweergave - + Scale Type Schaaltype - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Automatisch: als het detail aanzicht groter is dan de pagina, Aangepast: aangepaste schaalfactor wordt gebruikt - + Page Pagina - + Automatic Automatisch - + Custom Eigen - + Scale Factor Schaalfactor - + scale factor for detail view schaalfactor voor een detail aanzicht - + Reference Referentie - + reference label referentie label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 19b448e696..0474902811 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -1857,8 +1857,8 @@ Utwórz widok arkusza kalkulacyjnego - + Save page to dxf Zapisz stronę do pliku dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Nieprawidłowy wybór @@ -2596,9 +2596,6 @@ Wybrana krawędź to krzywa złożona. Promień będzie przybliżony. Kontynuować? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Niepoprawny wybór @@ -2707,11 +2707,6 @@ Brak właściwości kształtu w wyborze. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Wybór dla promienia nie zawiera okrągłej krawędzi (typ krawędzi: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Eksportuj stronę do formatu SVG + - Are you sure you want to continue? Czy na pewno chcesz kontynuować? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. zawiera symbol spoiny który zostałby uszkodzony. - + - - - + + + Object dependencies Zależności obiektów @@ -5116,47 +5116,47 @@ Czy chcesz kontynuować? TechDrawGui::TaskCenterLine - + Center Line Linia środkowa - + Base View Widok podstawowy - + Elements Elementy - + Orientation Orientacja - + Top to Bottom line Od góry do dołu - + Vertical Pionowo - + Left to Right line Od lewej do prawej - + Horizontal Poziomo - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5167,92 +5167,92 @@ Czy chcesz kontynuować? - punktami: w równej odległości co do punktów - + Aligned Wyrównane - + Shift Horizontal Przesuń w poziomie - + Move line -Left or +Right Przesuń linię - w Lewo lub + w Prawo - + Shift Vertical Przesuń w pionie - + Move line +Up or -Down Przesuń linię + w górę lub - w dół - + Rotate Obróć - + Rotate line +CCW or -CW Obróć linię + zgodnie z kierunkiem wskazówek zegara lub - przeciwnie do kierunku wskazówek zegara - + Extend By Rozszerz o - + Make the line a little longer. Zrób linię nieco dłuższą. - + mm mm - + Color Kolor - + Weight Grubość - + Style Styl - + Continuous Ciągła - + Dash Kreska - + Dot Kropka - + DashDot Kreska kropka - + DashDotDot Kreska kropka kropka @@ -5260,38 +5260,38 @@ Czy chcesz kontynuować? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Wierzchołek kosmetyczny - + Base View Widok podstawowy - + Point Picker Wybór punktów - + Position from the view center Pozycja od środka widoku - + Position Pozycja - + X X - + Y Y @@ -5368,312 +5368,312 @@ Czy chcesz kontynuować? TechDrawGui::TaskCustomizeFormat - + Format Symbols Symbole formatów - + GD&T Wymiarowanie geometrii i tolerancja (GD&T) - + Straightness Prostoliniowość - + Flatness Płaskość - + Circularity Okrągłość - + Cylindricity Cylindryczność - + Parallelism Równoległość - + Perpendicularity Prostopadłość - + Angularity Kątowość - + Profile of a line Profil linii - + Profile of a surface Profil powierzchni - + Circular runout Bicie obwodowe - + Total runout Całkowite bicie - + Position Pozycja - + Concentricity Koncentryczność - + Symmetry Odbicie lustrzane - + Modifiers Modyfikatory - + derived geometry element wynikowy element geometrii - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Stan kadłuba - + Free state Wolny stan - + Least square geometry element Najmniejszy kwadratowy element geometrii - + Least material condition (LMC) Najmniejszy stan materiału (LMC) - + Maximum material condition (MMC) Maksymalny stan materiału (MMC) - + least inscribed geometry element najmniejszy wpisany element geometrii - + Projected tolerance zone Przewidywana strefa tolerancji - + Reciprocity condition Warunek wzajemności - + Regardless of feature size (RFS) Niezależnie od rozmiaru cechy (RFS) - + Tangent plane Płaszczyzna styczna - + Unequal Bilateral Nierówne dwustronne - + most inscribed geometry element większość zapisanych elementów geometrii - + Radius & Diameter Promień i średnica - + Radius Promień - + Diameter Średnica - + Radius of sphere Promień sfery - + Diameter of sphere Średnica sfery - + Square Kwadrat - + Angles Kąty - + Degree Stopień - + (Arc) Minute Minuta (Łuk) - + (Arc) Second Sekunda (Łuk) - + (Arc) Tertie Tercja (Łuk) - + Other Inne - + Taper Zwężenie - + Slope Nachylenie - + Counterbore Pogłębienie walcowe - + Countersink Pogłębienie stożkowe - + Plus - Minus Plus - Minus - + Centerline Linia środkowa - + Left/right arrow Strzałka w lewo / prawo - + Downward arrow Strzałka w dół - + Multiplication sign Znak mnożenia - + Greek Letters Litery greckie - + Capital delta Delta wielka litera - + Capital sigma Sigma wielką literą - + Capital omega Omega wielka litera - + Small mu Mi mała litera - + Small sigma Sigma mała litera - + Small phi Fi mała litera - + Small omega Omega mała litera - + Format: Format: - + Preview: Podgląd: @@ -5686,68 +5686,68 @@ Czy chcesz kontynuować? TechDrawGui::TaskDetail - + Detail Anchor Kotwica szczegółu - + Base View Widok podstawowy - + Detail View Widok szczegółu - + Click to drag detail highlight to new position Kliknij, aby przeciągnąć podświetlony detal do nowej pozycji - + Drag Highlight Podświetlenie szczegółu - + X X - + x position of detail highlight within view położenie X podświetlenia szczegółów w widoku - + Y Y - + y position of detail highlight within view położenie Y podświetlenia szczegółów w widoku - + Radius Promień - + size of detail view rozmiar widoku detalu - + Scale Type Typ skali - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5758,37 +5758,37 @@ Automatyczna: jeśli widok szczegółów jest większy niż strona, Niestandardowa: stosuje się współczynnik skalowania podany przez użytkownika - + Page Strona - + Automatic Automatyczna - + Custom Niestandardowa - + Scale Factor Współczynnik skali - + scale factor for detail view współczynnik skali dla widoku szczegółów - + Reference Odniesienie - + reference label odniesienie etykiety diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index c25a02f4b5..7becadd833 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -1857,8 +1857,8 @@ Criar vista de planilha - + Save page to dxf Salvar página para dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Seleção incorreta @@ -2596,9 +2596,6 @@ A aresta selecionada é uma BSpline. O raio será aproximado. Continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Seleção Incorreta @@ -2707,11 +2707,6 @@ Nenhum objeto com forma na seleção. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportar página para SVG + - Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. ela tem um símbolo de solda que quebraria. - + - - - + + + Object dependencies Dependências do objeto @@ -5115,47 +5115,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Linha central - + Base View Vista de base - + Elements Elementos - + Orientation Orientação - + Top to Bottom line Linha de cima a baixo - + Vertical Vertical - + Left to Right line Linha da esquerda para a direita - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Do you want to continue? - pontos: em igual distância aos pontos - + Aligned Alinhado - + Shift Horizontal Deslocamento horizontal - + Move line -Left or +Right Mover linha -esquerda ou +direita - + Shift Vertical Deslocamento vertical - + Move line +Up or -Down Mover linha +cima ou -baixo - + Rotate Rotacionar - + Rotate line +CCW or -CW Girar a linha +anti-horário ou -horário - + Extend By Estender por - + Make the line a little longer. Torne a linha um pouco mais longa. - + mm mm - + Color Cor - + Weight Peso - + Style Estilo - + Continuous Contínuo - + Dash Tracejado - + Dot Ponto - + DashDot Traço Ponto - + DashDotDot Traço Ponto Ponto @@ -5259,38 +5259,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vértex cosmético - + Base View Vista de base - + Point Picker Selecionador de Pontos - + Position from the view center Posição do centro de vista - + Position Posição - + X X - + Y Y @@ -5367,312 +5367,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Posição - + Concentricity Concentricity - + Symmetry Simetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Raio - + Diameter Diâmetro - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Quadrado - + Angles Angles - + Degree Grau - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Outro - + Taper Aguçar - + Slope Inclinação - + Counterbore Rebaixo - + Countersink Escarear - + Plus - Minus Plus - Minus - + Centerline Linha central - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Pré-visualização: @@ -5685,68 +5685,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Indicador de detalhe - + Base View Vista de base - + Detail View Vista de detalhe - + Click to drag detail highlight to new position Clique para arrastar o indicador de detalhe para a nova posição - + Drag Highlight Arrastar indicador - + X X - + x position of detail highlight within view posição x do detalhe dentro da vista - + Y Y - + y position of detail highlight within view posição y do detalhe dentro da vista - + Radius Raio - + size of detail view tamanho da vista de detalhe - + Scale Type Tipo de escala - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Automático: se a vista de detalhe for maior que a página, Personalizado: o fator de escala personalizado é usado - + Page Página - + Automatic Automática - + Custom Personalizado - + Scale Factor Fator de escala - + scale factor for detail view fator de escala para vista detalhada - + Reference Referência - + reference label rótulo de referência diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index 0974d0c721..e7a198c0d1 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -1857,8 +1857,8 @@ Criar vista de folha de cálculo - + Save page to dxf Salvar folha para dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selecção incorrecta @@ -2596,9 +2596,6 @@ A aresta selecionada é uma BSpline. O raio será aproximado. Continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Seleção Incorreta @@ -2707,11 +2707,6 @@ Nenhum recurso com forma de seleção. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportar folha como SVG + - Are you sure you want to continue? Tem certeza que deseja continuar? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. ela tem um símbolo de soldadura que se quebrará. - + - - - + + + Object dependencies Dependências do objeto @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Linha de Eixo - + Base View Base View - + Elements Elementos - + Orientation Orientação - + Top to Bottom line Linha de cima para baixo - + Vertical Vertical - + Left to Right line Linha da esquerda para a direita - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Alinhado - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Mover linha -Esquerda ou +Direita - + Shift Vertical Shift Vertical - + Move line +Up or -Down Mover linha +Cima ou -Baixo - + Rotate Rodar - + Rotate line +CCW or -CW Rodar a linha +CCW ou -CW - + Extend By Extend By - + Make the line a little longer. Torna a linha um pouco mais longa. - + mm mm - + Color Cor - + Weight Weight - + Style Estilo - + Continuous Contínuo - + Dash Tracejado - + Dot Ponto - + DashDot TraçoPonto - + DashDotDot TraçoPontoPonto @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Posição - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Posição - + Concentricity Concentricity - + Symmetry Simetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Raio - + Diameter Diâmetro - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Quadrado - + Angles Angles - + Degree Grau - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Outros - + Taper Taper - + Slope Inclinação - + Counterbore Rebaixo - + Countersink Escarear - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Pré-visualizar: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Vista de Detalhe - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Raio - + size of detail view tamanho da vista de detalhe - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Folha de desenho - + Automatic Automática - + Custom Personalizado - + Scale Factor Scale Factor - + scale factor for detail view fator de escala para vista de detalhe - + Reference Referência - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index e381e10be5..2df9a2c47a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selectarea incorectă @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selectarea incorectă @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportă pagina ca SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Dependențe obiect @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Elemente - + Orientation Orientarea - + Top to Bottom line Top to Bottom line - + Vertical Vertical - + Left to Right line Left to Right line - + Horizontal Horizontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Aliniat - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Rotire - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm mm - + Color Culoare - + Weight Greutate - + Style Stil - + Continuous Continuous - + Dash Punct - + Dot Punct - + DashDot Linie punct - + DashDotDot Linie două puncte @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetrie - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Raza - + Diameter Diametru - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Pătrat - + Angles Angles - + Degree Grad - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Altceva - + Taper Conicitate - + Slope Slope - + Counterbore Frezarea - + Countersink Frezaj - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Previzualizare: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Raza - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Pagină - + Automatic Automat - + Custom Personalizat - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Referinţă - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 5eb7d5132b..241b6b5552 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -1857,8 +1857,8 @@ Создать электронную таблицу - + Save page to dxf Сохранить лист в DXF формате @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Некорректный выбор @@ -2596,9 +2596,6 @@ Выбранная грань - BSpline. Радиус будет приблизительным. Продолжить? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Некорректный выбор @@ -2707,11 +2707,6 @@ Нет элемента с формой в выбранном. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Экспорт листа в SVG + - Are you sure you want to continue? Вы уверены, что хотите продолжить? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. содержит символ сварки, который может быть повреждён. - + - - - + + + Object dependencies Зависимости объектов @@ -5112,47 +5112,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Осевая линия - + Base View Базовый вид - + Elements Элементы - + Orientation Ориентация - + Top to Bottom line Линия сверху вниз - + Vertical По вертикали - + Left to Right line Линия слева направо - + Horizontal По горизонтали - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5163,92 +5163,92 @@ Do you want to continue? - точки: на равном расстоянии от точек - + Aligned Выровненный - + Shift Horizontal Горизонтальный сдвиг - + Move line -Left or +Right Переместить линию -Влево или +Вправо - + Shift Vertical Вертикальный сдвиг - + Move line +Up or -Down Переместить линию +Вверх или -Вниз - + Rotate Повернуть - + Rotate line +CCW or -CW Поворот линии +ПрЧС или -ПоЧС - + Extend By Продлить на - + Make the line a little longer. Сделать линию немного длиннее. - + mm мм - + Color Цвет - + Weight Толщина - + Style Стиль - + Continuous Сплошная - + Dash Штрих - + Dot Точка - + DashDot Штрихпунктир - + DashDotDot Штрихпунктир с 2 точками @@ -5256,38 +5256,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Вспомогательная Вершина - + Base View Базовый вид - + Point Picker Выбор точек - + Position from the view center Позиция из центра вида - + Position Положение - + X X - + Y Y @@ -5364,312 +5364,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Положение - + Concentricity Concentricity - + Symmetry Симметрия - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Радиус - + Diameter Диаметр - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Квадрат - + Angles Angles - + Degree Градусы - + (Arc) Minute (Дуга) Минута - + (Arc) Second (Дуга) Секунда - + (Arc) Tertie (Arc) Tertie - + Other Нечто - + Taper Сужение - + Slope Наклон - + Counterbore Цековка - + Countersink Зенковка - + Plus - Minus Plus - Minus - + Centerline Осевая линия - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Предпросмотр: @@ -5682,68 +5682,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Подробная привязка - + Base View Базовый вид - + Detail View Выносной элемент - + Click to drag detail highlight to new position Щелкните, чтобы перетащить подсветку в новое положение - + Drag Highlight Перетащить выделение - + X X - + x position of detail highlight within view x положение выделения деталей в пределах вида - + Y Y - + y position of detail highlight within view y позиция выделения детали на виде - + Radius Радиус - + size of detail view размер выносного элемента - + Scale Type Тип масштабирования - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5754,37 +5754,37 @@ Custom: custom scale factor is used Пользовательский: используется пользовательский коэффициент масштабирования - + Page Страница - + Automatic Автоматически - + Custom Дополнительно - + Scale Factor Коэффициент масштаба - + scale factor for detail view масштаб для выносного элемента - + Reference Ссылка - + reference label ссылочная метка diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index 64f1583f4d..090577eddf 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -1857,8 +1857,8 @@ Ustvari preglednični pogled - + Save page to dxf Shrani stran kot DXF @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Nepravilen izbor @@ -2596,9 +2596,6 @@ Izbrani rob je B-zlepek. Polmer bo približen. Nadaljevanje? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Nepravilna Izbira @@ -2707,11 +2707,6 @@ V izboru ni značilnosti oblike. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Izvozi stran kot SVG + - Are you sure you want to continue? Ali ste prepričani da želite nadaljevati? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. oznako za varjenje, ki bi postala okvarjena. - + - - - + + + Object dependencies Odvisnosti predmetov @@ -5115,47 +5115,47 @@ Ali želite nadaljevati? TechDrawGui::TaskCenterLine - + Center Line Središčnica - + Base View Pogled podloge - + Elements Prvine - + Orientation Usmerjenost - + Top to Bottom line Črta od vrha do tal - + Vertical Navpično - + Left to Right line Črta od leve proti desni - + Horizontal Vodoravno - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Ali želite nadaljevati? - točkama: enako oddaljena od obeh točk - + Aligned Poravnano - + Shift Horizontal Premakni vodoravno - + Move line -Left or +Right Premakni črto levo (-) ali desno (+) - + Shift Vertical Premakni navpično - + Move line +Up or -Down Premakni črto navzgor (+) ali navzdol (-) - + Rotate Zavrti - + Rotate line +CCW or -CW Sukaj črto NSUK (+) ali SUK (-) - + Extend By Podaljšaj za - + Make the line a little longer. Naradi črto malo daljšo. - + mm mm - + Color Barva - + Weight Debelina - + Style Slog - + Continuous Neprekinjena - + Dash Črtkana - + Dot Pika - + DashDot Črtopična - + DashDotDot Črtica dve piki @@ -5259,38 +5259,38 @@ Ali želite nadaljevati? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Dopolnilno oglišče - + Base View Pogled podloge - + Point Picker Izbirnik točk - + Position from the view center Položaj od središča pogleda - + Position Position - + X X - + Y Y @@ -5367,312 +5367,312 @@ Ali želite nadaljevati? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Somernost - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Polmer - + Diameter Premer - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kvadrat - + Angles Angles - + Degree Stopinje - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Drugo - + Taper Koniči - + Slope Naklon - + Counterbore Valjno grezenje - + Countersink Kotno grezenje - + Plus - Minus Plus - Minus - + Centerline Središčnica - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Predogled: @@ -5685,68 +5685,68 @@ Ali želite nadaljevati? TechDrawGui::TaskDetail - + Detail Anchor Sidrišče detajla - + Base View Pogled podloge - + Detail View Pogled s podrobnostmi - + Click to drag detail highlight to new position Kliknite, da povlečete oznako detajlna na novo mesto - + Drag Highlight Povleci označbo - + X X - + x position of detail highlight within view x položaja označitve detajla znotraj pogleda - + Y Y - + y position of detail highlight within view y položaja označitve detajla znotraj pogleda - + Radius Polmer - + size of detail view velikost podrobnega pogleda - + Scale Type Način merila - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Samodejno: če je podrobni pogled večji od strani, Po meri: uporabljen je količnik merila po meri - + Page Stran - + Automatic Samodejno - + Custom Po meri - + Scale Factor Količnik merila - + scale factor for detail view količnik merila podrobnega pogleda - + Reference Osnova - + reference label oznaka sklica diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 00bbe2d17e..753f0bc939 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -1857,8 +1857,8 @@ Skapa kalkylbladsvy - + Save page to dxf Spara sida på dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Felaktig markering @@ -2596,9 +2596,6 @@ Markerad kant är en B-spline, radie kommer att vara uppskattad. Fortsätt? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Felaktig markering @@ -2707,11 +2707,6 @@ Ingen funktion med form i markeringen. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportera sida som SVG + - Are you sure you want to continue? Är du säker på att du vill fortsätta? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. den har en svetssymbol som skulle bli trasig. - + - - - + + + Object dependencies Objektberoenden @@ -5115,47 +5115,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Centrumlinje - + Base View Basvy - + Elements Element - + Orientation Orientering - + Top to Bottom line Överst till nedersta raden - + Vertical Lodrät - + Left to Right line Vänster till höger-linje - + Horizontal Horisontell - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5166,92 +5166,92 @@ Do you want to continue? - punkter: i lika avstånd till punkterna - + Aligned Justerad - + Shift Horizontal Skift vågrät - + Move line -Left or +Right Flytta linje -Vänster eller +Höger - + Shift Vertical Skift lodrätt - + Move line +Up or -Down Flytta linje +Upp eller -Ned - + Rotate Rotera - + Rotate line +CCW or -CW Rotera linje +CCW eller -CW - + Extend By Förläng med - + Make the line a little longer. Gör linjen lite längre. - + mm mm - + Color Färg - + Weight Tjocklek - + Style Stil - + Continuous Kontinuerlig - + Dash Streck - + Dot Punkt - + DashDot Streck-punkt - + DashDotDot Streck-punkt-punkt @@ -5259,38 +5259,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Kosmetisk hörnpunkt - + Base View Basvy - + Point Picker Punktväljare - + Position from the view center Position från vycentrum - + Position Position - + X X - + Y Y @@ -5367,312 +5367,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Symmetri - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Radie - + Diameter Diameter - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kvadrat - + Angles Angles - + Degree Grad - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Övrigt - + Taper Taper - + Slope Lutning - + Counterbore Rak försänkning - + Countersink Sned försänkning - + Plus - Minus Plus - Minus - + Centerline Mittlinjen - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Förhandsgranskning: @@ -5685,68 +5685,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detalj Ankare - + Base View Basvy - + Detail View Detaljvy - + Click to drag detail highlight to new position Klicka för att dra detaljmarkering till ny position - + Drag Highlight Dra högdager - + X X - + x position of detail highlight within view x position av detalj markera inom vy - + Y Y - + y position of detail highlight within view y position av detalj markera inom vy - + Radius Radie - + size of detail view storlek på detaljvyn - + Scale Type Skala typ - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5757,37 +5757,37 @@ Automatisk: om detaljvyn är större än sidan, Anpassad: anpassad skalfaktor används - + Page Sida - + Automatic Automatisk - + Custom Anpassad - + Scale Factor Skala Faktor - + scale factor for detail view skalfaktor för detaljvy - + Reference Referens - + reference label referensetikett diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index fe4e1da6fa..bdd16561ba 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -1857,8 +1857,8 @@ Elektronik tablo görünümü oluştur - + Save page to dxf Sayfayı dxf olarak kaydedin @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Yanlış seçim @@ -2596,9 +2596,6 @@ Seçili kenar bir BSpline'dır. Yarıçap yaklaşık olacaktır. Devam? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Hatalı seçim @@ -2707,11 +2707,6 @@ Seçimdeki şeklin özelliği yok. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Sayfayı SVG olarak dışa aktar + - Are you sure you want to continue? Devam etmek istediğinizden emin misiniz? @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. Bu ölçü çizgisini silemezsiniz çünkü bozulabilecek bir kaynak sembolü içeriyor. - + - - - + + + Object dependencies Nesne bağımlılıkları @@ -5110,47 +5110,47 @@ Devam etmek istiyor musun? TechDrawGui::TaskCenterLine - + Center Line Eksen - + Base View Temel Görünüm - + Elements Elementler - + Orientation Yönlendirme - + Top to Bottom line Üstten Alta çizgi - + Vertical Dikey - + Left to Right line Soldan Sağa çizgi - + Horizontal Yatay - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5161,92 +5161,92 @@ Devam etmek istiyor musun? - noktalar arasında: noktalara eşit mesafede - + Aligned Hizalanmış - + Shift Horizontal Yatay Kaydır - + Move line -Left or +Right Çizgiyi -Sola veya +Sağa taşı - + Shift Vertical Dikey Kaydır - + Move line +Up or -Down Çizgiyi +Yukarı veya -Aşağı taşı - + Rotate Döndür - + Rotate line +CCW or -CW Çizgiyi +SYT veya -SY' de döndür - + Extend By Tarafından uzat - + Make the line a little longer. Çizgiyi biraz daha uzun tut. - + mm mm - + Color Renk - + Weight Ağırlık - + Style Stil(tarz) - + Continuous Sürekli - + Dash Kır - + Dot Nokta - + DashDot Çizgi nokta - + DashDotDot DashDotDot @@ -5254,38 +5254,38 @@ Devam etmek istiyor musun? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Yardımcı Nokta - + Base View Temel Görünüm - + Point Picker Nokta Seçici - + Position from the view center Görünüm merkezinden konum al - + Position Position - + X X - + Y Y @@ -5362,312 +5362,312 @@ Devam etmek istiyor musun? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetri - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Yarıçap - + Diameter Çap - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Kare - + Angles Angles - + Degree Derece - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Diğer - + Taper Konikİncelme - + Slope Eğim - + Counterbore Havşa - + Countersink Havşa - + Plus - Minus Plus - Minus - + Centerline Eksen Çizgisi - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Önizleme: @@ -5680,68 +5680,68 @@ Devam etmek istiyor musun? TechDrawGui::TaskDetail - + Detail Anchor Ayrıntı Bağlayıcı - + Base View Temel Görünüm - + Detail View Detay görünümü - + Click to drag detail highlight to new position Ayrıntı vurgusunu yeni konuma sürüklemek için tıklayın - + Drag Highlight Vurguyu Sürükle - + X X - + x position of detail highlight within view görünüm içerisindeki ayrıntı vurgusunun x konumu - + Y Y - + y position of detail highlight within view görünüm içerisindeki ayrıntı vurgusunun y konumu - + Radius Yarıçap - + size of detail view ayrıntı görünüm boyutu - + Scale Type Ölçek Türü - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5752,37 +5752,37 @@ Otomatik: ayrıntı görünüş sayfadan genişse, Özel: özel ölçek katsayısı kullanılır - + Page Sayfa - + Automatic Otomatik - + Custom Özel - + Scale Factor Ölçek Katsayısı - + scale factor for detail view ayrıntı görünüm için ölçek katsayısı - + Reference Referans - + reference label referans etiketi diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 16a44a596d..835c6e5f44 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Зберегти сторінку в dxf файл @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Некоректний вибір @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Некоректний вибір @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Експорт в SVG + - Are you sure you want to continue? Ви впевнені, що бажаєте продовжити? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Залежності обʼєктів @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Елементи - + Orientation Орієнтація - + Top to Bottom line Top to Bottom line - + Vertical По вертикалі - + Left to Right line Left to Right line - + Horizontal По горизонталі - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5165,92 +5165,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Обертання - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm мм - + Color Колір - + Weight Weight - + Style Стиль - + Continuous Continuous - + Dash Тире - + Dot Крапка - + DashDot DashDot - + DashDotDot DashDotDot @@ -5258,38 +5258,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Позиція - + X X - + Y Y @@ -5366,312 +5366,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Позиція - + Concentricity Concentricity - + Symmetry Симетрія - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Радіус - + Diameter Діаметр - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Квадрат - + Angles Angles - + Degree Кут - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Інші - + Taper Звуження - + Slope Нахил - + Counterbore Цеківка - + Countersink Зенківка - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Попередній перегляд: @@ -5684,68 +5684,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Радіус - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5756,37 +5756,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Сторінка - + Automatic Автоматичний - + Custom Підлаштувати - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Посилання - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index 3366191203..5272894138 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Selecció incorrecta @@ -2596,9 +2596,6 @@ L'aresta seleccionada és una BSpline. El radi serà aproximat. Voleu continuar? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Selecció incorrecta @@ -2707,11 +2707,6 @@ No hi ha cap propietat amb forma en la selecció. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Exportar una pàgina com a SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Dependències de l'objecte @@ -5105,47 +5105,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line Línia central - + Base View Vista base - + Elements Elements - + Orientation Orientació - + Top to Bottom line Línia superior a la part inferior - + Vertical Vertical - + Left to Right line Línia esquerra a la dreta - + Horizontal Horitzontal - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5155,92 +5155,92 @@ Do you want to continue? - punts: a igual distància entre punts - + Aligned Alineat - + Shift Horizontal Desplaçament horitzontal - + Move line -Left or +Right Mou la línia -esquerra o +dreta - + Shift Vertical Desplaçament vertical - + Move line +Up or -Down Mou la línia +amunt o -avall - + Rotate Gira - + Rotate line +CCW or -CW Gira la línia +en sentit antihorari CCW o - en sentit horari CW - + Extend By Estén - + Make the line a little longer. Allarga un poc la línia. - + mm mm - + Color Color - + Weight Pes - + Style Estil - + Continuous Continu - + Dash Guió - + Dot Punt - + DashDot Guió punt - + DashDotDot Guió punt punt @@ -5248,38 +5248,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Vèrtex cosmètic - + Base View Vista base - + Point Picker Seleccionador de punts - + Position from the view center Posició des del centre de la vista - + Position Position - + X X - + Y Y @@ -5356,312 +5356,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Simetria - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Radi - + Diameter Diàmetre - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Quadrat - + Angles Angles - + Degree Graus - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Altres - + Taper Taper - + Slope Slope - + Counterbore Cilíndríc - + Countersink Aixamfranat - + Plus - Minus Plus - Minus - + Centerline Línia central - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Previsualització: @@ -5674,68 +5674,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Àncora del detall - + Base View Vista base - + Detail View Vista de detall - + Click to drag detail highlight to new position Feu clic per a arrossegar el ressaltat del detall a una posició nova - + Drag Highlight Arrossega el ressaltat - + X X - + x position of detail highlight within view posició x del ressaltat del detall en la vista - + Y Y - + y position of detail highlight within view posició y del ressaltat del detall en la vista - + Radius Radi - + size of detail view mida de la vista de detall - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5746,37 +5746,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Pàgina - + Automatic Automàtica - + Custom Personalitzat - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Ref - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts index dfecaec0c7..4aac45a92c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf Save page to dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection Lựa chọn không đúng @@ -2596,9 +2596,6 @@ Selected edge is a BSpline. Radius will be approximate. Continue? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection Lựa chọn không đúng @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ Xuất trang dưới dạng SVG + - Are you sure you want to continue? Are you sure you want to continue? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. it has a weld symbol that would become broken. - + - - - + + + Object dependencies Phụ thuộc đối tượng @@ -5116,47 +5116,47 @@ Bạn có muốn tiếp tục? TechDrawGui::TaskCenterLine - + Center Line Center Line - + Base View Base View - + Elements Thành phần - + Orientation Sự định hướng - + Top to Bottom line Top to Bottom line - + Vertical Nằm dọc - + Left to Right line Left to Right line - + Horizontal Nằm ngang - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5167,92 +5167,92 @@ Bạn có muốn tiếp tục? - points: in equal distance to the points - + Aligned Aligned - + Shift Horizontal Shift Horizontal - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical Shift Vertical - + Move line +Up or -Down Move line +Up or -Down - + Rotate Xoay - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By Extend By - + Make the line a little longer. Make the line a little longer. - + mm mm - + Color Màu - + Weight Weight - + Style Kiểu - + Continuous Continuous - + Dash Nét - + Dot Chấm - + DashDot Nét chấm - + DashDotDot Nét chấm chấm @@ -5260,38 +5260,38 @@ Bạn có muốn tiếp tục? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View Base View - + Point Picker Point Picker - + Position from the view center Position from the view center - + Position Position - + X X - + Y Y @@ -5368,312 +5368,312 @@ Bạn có muốn tiếp tục? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position Position - + Concentricity Concentricity - + Symmetry Đối xứng - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius Bán kính - + Diameter Đường kính - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square Hình vuông - + Angles Angles - + Degree Độ - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other Khác - + Taper Taper - + Slope Slope - + Counterbore Khoét xoáy rộng - + Countersink Khoét loe miệng - + Plus - Minus Plus - Minus - + Centerline Centerline - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: Xem trước: @@ -5686,68 +5686,68 @@ Bạn có muốn tiếp tục? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View Base View - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius Bán kính - + size of detail view size of detail view - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5758,37 +5758,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page Trang - + Automatic Tự động - + Custom Tùy chọn - + Scale Factor Scale Factor - + scale factor for detail view scale factor for detail view - + Reference Tham chiếu - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index 9ee27c0b1d..f0c81141bd 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -1857,8 +1857,8 @@ 创建电子表格视图 - + Save page to dxf 保存页面到 dxf @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection 选择错误 @@ -2596,9 +2596,6 @@ 所选边是贝赛尔曲线。 半径将是近似值。继续？ - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection 选择错误 @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ 以 SVG格式导出页面 + - Are you sure you want to continue? 您确定要继续吗？ @@ -3250,19 +3250,19 @@ it has a weld symbol that would become broken. 指引线 - + - - - + + + Object dependencies 对象依赖关系 @@ -5113,47 +5113,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line 中心线 - + Base View 基准视图 - + Elements 元素 - + Orientation 方向 - + Top to Bottom line Top to Bottom line - + Vertical 垂直 - + Left to Right line Left to Right line - + Horizontal 水平 - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5164,92 +5164,92 @@ Do you want to continue? - points: in equal distance to the points - + Aligned 对齐 - + Shift Horizontal 水平偏移 - + Move line -Left or +Right Move line -Left or +Right - + Shift Vertical 垂直偏移 - + Move line +Up or -Down Move line +Up or -Down - + Rotate 旋转 - + Rotate line +CCW or -CW Rotate line +CCW or -CW - + Extend By 延长 - + Make the line a little longer. 使线条稍稍变长。 - + mm mm - + Color 颜色 - + Weight 重量 - + Style 样式 - + Continuous Continuous - + Dash 虚线 - + Dot 点 - + DashDot 点划线 - + DashDotDot 双点划线 @@ -5257,38 +5257,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View 基准视图 - + Point Picker 点选取器 - + Position from the view center Position from the view center - + Position 位置 - + X X - + Y Y @@ -5365,312 +5365,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols Format Symbols - + GD&T GD&T - + Straightness Straightness - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position 位置 - + Concentricity Concentricity - + Symmetry 对称 - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone Projected tolerance zone - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius 半径 - + Diameter 直径 - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square 正方形 - + Angles Angles - + Degree 度 - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other 其它 - + Taper 锥度 - + Slope Slope - + Counterbore 沉孔 - + Countersink 埋头孔 - + Plus - Minus Plus - Minus - + Centerline 中心线 - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: 预览: @@ -5683,68 +5683,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View 基准视图 - + Detail View 局部视图 - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Y - + y position of detail highlight within view y position of detail highlight within view - + Radius 半径 - + size of detail view 局部视图大小 - + Scale Type Scale Type - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5755,37 +5755,37 @@ Automatic: if the detail view is larger than the page, Custom: custom scale factor is used - + Page 页 - + Automatic 自动 - + Custom 自定义 - + Scale Factor 缩放比例 - + scale factor for detail view 局部视图缩放比例 - + Reference 参考 - + reference label reference label diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index bc994e2459..bc49b0c715 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -1857,8 +1857,8 @@ Create spreadsheet view - + Save page to dxf 儲存頁面為 DXF 格式 @@ -2448,14 +2448,14 @@ - - - + + + Incorrect selection 不正確的選取 @@ -2596,9 +2596,6 @@ 選取邊為 B 雲形線。半徑將會是近似值。是否繼續 ? - - - @@ -2608,6 +2605,9 @@ + + + Incorrect Selection 不正確的選取 @@ -2707,11 +2707,6 @@ No Feature with Shape in selection. - - - - - @@ -2727,6 +2722,11 @@ + + + + + @@ -2746,11 +2746,6 @@ Selection for Radius does not contain a circular edge (edge type: %1) - - - - - @@ -2766,6 +2761,11 @@ + + + + + @@ -3009,9 +3009,9 @@ 匯出頁面為 SVG 檔 + - Are you sure you want to continue? 您確定要繼續嗎? @@ -3251,19 +3251,19 @@ it has a weld symbol that would become broken. 它有焊接符號會損壞。 - + - - - + + + Object dependencies 物件相依 @@ -5114,47 +5114,47 @@ Do you want to continue? TechDrawGui::TaskCenterLine - + Center Line 中心線 - + Base View 基礎視圖 - + Elements 元件 - + Orientation 定位 - + Top to Bottom line 從上到下的線 - + Vertical 垂直 - + Left to Right line 從左到右的線 - + Horizontal 水平的 - + centerline between - lines: in equal distance to the lines and with half of the angle the lines have to each other @@ -5164,92 +5164,92 @@ Do you want to continue? - 點：與點的距確相等 - + Aligned 對齊 - + Shift Horizontal 水平移動 - + Move line -Left or +Right 往左減或往右加來移動線 - + Shift Vertical 垂直移動 - + Move line +Up or -Down 往上加或往下減來移動線 - + Rotate 旋轉 - + Rotate line +CCW or -CW 逆時鐘加或順時鐘減來旋轉線 - + Extend By Extend By - + Make the line a little longer. 讓線稍微長一點 - + mm mm - + Color 色彩 - + Weight 權重 - + Style 風格 - + Continuous 連續 - + Dash 虛線 - + Dot 點 - + DashDot 虛線點 - + DashDotDot 虛線點點 @@ -5257,38 +5257,38 @@ Do you want to continue? TechDrawGui::TaskCosVertex - + Cosmetic Vertex Cosmetic Vertex - + Base View 基礎視圖 - + Point Picker 點選擇器 - + Position from the view center Position from the view center - + Position 位置 - + X X - + Y Ÿ @@ -5365,312 +5365,312 @@ Do you want to continue? TechDrawGui::TaskCustomizeFormat - + Format Symbols 格式化符號 - + GD&T GD&T - + Straightness 直線度 - + Flatness Flatness - + Circularity Circularity - + Cylindricity Cylindricity - + Parallelism Parallelism - + Perpendicularity Perpendicularity - + Angularity Angularity - + Profile of a line Profile of a line - + Profile of a surface Profile of a surface - + Circular runout Circular runout - + Total runout Total runout - + Position 位置 - + Concentricity Concentricity - + Symmetry 對稱 - + Modifiers Modifiers - + derived geometry element derived geometry element - + Minimax (Tschebyschew) Minimax (Tschebyschew) - + Hull condition Hull condition - + Free state Free state - + Least square geometry element Least square geometry element - + Least material condition (LMC) Least material condition (LMC) - + Maximum material condition (MMC) Maximum material condition (MMC) - + least inscribed geometry element least inscribed geometry element - + Projected tolerance zone 投影公差地帶 - + Reciprocity condition Reciprocity condition - + Regardless of feature size (RFS) Regardless of feature size (RFS) - + Tangent plane Tangent plane - + Unequal Bilateral Unequal Bilateral - + most inscribed geometry element most inscribed geometry element - + Radius & Diameter Radius & Diameter - + Radius 半徑 - + Diameter 直徑 - + Radius of sphere Radius of sphere - + Diameter of sphere Diameter of sphere - + Square 正方形 - + Angles Angles - + Degree 程度 - + (Arc) Minute (Arc) Minute - + (Arc) Second (Arc) Second - + (Arc) Tertie (Arc) Tertie - + Other 其他 - + Taper Taper - + Slope Slope - + Counterbore 沉頭孔 - + Countersink 埋頭孔 - + Plus - Minus Plus - Minus - + Centerline 中心線 - + Left/right arrow Left/right arrow - + Downward arrow Downward arrow - + Multiplication sign Multiplication sign - + Greek Letters Greek Letters - + Capital delta Capital delta - + Capital sigma Capital sigma - + Capital omega Capital omega - + Small mu Small mu - + Small sigma Small sigma - + Small phi Small phi - + Small omega Small omega - + Format: Format: - + Preview: 預覽： @@ -5683,68 +5683,68 @@ Do you want to continue? TechDrawGui::TaskDetail - + Detail Anchor Detail Anchor - + Base View 基礎視圖 - + Detail View Detail View - + Click to drag detail highlight to new position Click to drag detail highlight to new position - + Drag Highlight Drag Highlight - + X X - + x position of detail highlight within view x position of detail highlight within view - + Y Ÿ - + y position of detail highlight within view y position of detail highlight within view - + Radius 半徑 - + size of detail view size of detail view - + Scale Type 縮放類別 - + Page: scale factor of page is used Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page @@ -5755,37 +5755,37 @@ Custom: custom scale factor is used 自訂：使用者自訂縮放係數 - + Page 頁 - + Automatic Automatic - + Custom 自訂 - + Scale Factor 縮放係數 - + scale factor for detail view 詳細視圖之縮放係數 - + Reference 參考 - + reference label reference label