diff --git a/src/Gui/Language/FreeCAD_ar.qm b/src/Gui/Language/FreeCAD_ar.qm index 47decf0817..d24c3dd555 100644 Binary files a/src/Gui/Language/FreeCAD_ar.qm and b/src/Gui/Language/FreeCAD_ar.qm differ diff --git a/src/Gui/Language/FreeCAD_ar.ts b/src/Gui/Language/FreeCAD_ar.ts index b68313cc21..4ec442eff0 100644 --- a/src/Gui/Language/FreeCAD_ar.ts +++ b/src/Gui/Language/FreeCAD_ar.ts @@ -3293,10 +3293,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3313,6 +3309,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4511,32 +4511,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6062,6 +6062,18 @@ Do you want to specify another directory? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + اليونانية + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7026,6 +7038,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9833,6 +9877,10 @@ Do you still want to proceed? Special Ops Special Ops + + Axonometric + Axonometric + testClass diff --git a/src/Gui/Language/FreeCAD_bg.qm b/src/Gui/Language/FreeCAD_bg.qm index 097ade43b4..ee62d33c90 100644 Binary files a/src/Gui/Language/FreeCAD_bg.qm and b/src/Gui/Language/FreeCAD_bg.qm differ diff --git a/src/Gui/Language/FreeCAD_bg.ts b/src/Gui/Language/FreeCAD_bg.ts index b2900f2f6b..15000a907d 100644 --- a/src/Gui/Language/FreeCAD_bg.ts +++ b/src/Gui/Language/FreeCAD_bg.ts @@ -3266,10 +3266,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3286,6 +3282,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4484,32 +4484,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6035,6 +6035,18 @@ Do you want to specify another directory? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Гръцки + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -6999,6 +7011,38 @@ Physical path: Физически път: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9806,6 +9850,10 @@ Do you still want to proceed? Special Ops Специални операции + + Axonometric + Аксонометрия + testClass diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm index 98fc5c754c..26b3ca064d 100644 Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 4ca7b9b6f1..bcf978ba2e 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -3285,10 +3285,6 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Bancs de treball no carregats - Workbench Name Workbench Name @@ -3305,6 +3301,10 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4500,32 +4500,32 @@ La columna 'Estat' mostra si el document es pot recuperar. Seleccioneu 1, 2 o 3 punts abans de fer clic en aquest botó. Un punt pot estar en un vèrtex, cara o aresta. Si esteu en una cara o aresta, el punt utilitzat serà el punt en la cara o aresta de la posició del ratolí. Si 1 punt és seleccionat serà utilitzat com a centre de rotació. Si se seleccionen 2 punts, el punt mig entre ells serà el centre de rotació i un nou eix personalitzat es crearà, si és necessari. Si se seleccionen 3 punts, el primer punt es converteix en el centre de rotació i es troba en el vector que és normal al pla definit per 3 punts. Alguns detalls de distància i angle es proporcionen en la visualització d'informe, que pot ser útil per a alinear objectes. Per a la vostra comoditat, quan feu Majúscules + clic s'utilitza la distància adequada o l'angle es copia al porta-retalls. - Around y-axis: - Al voltant de l'eix Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Al voltant de l'eix Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Al voltant de l'eix X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotació al voltant de l'eix X + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotació al voltant de l'eix Y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotació al voltant de l'eix Z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Angles d'Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6043,6 +6043,18 @@ Do you want to specify another directory? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Grec + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7001,6 +7013,38 @@ Physical path: Ruta física: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9808,6 +9852,10 @@ Encara voleu continuar? Special Ops Operacions especials + + Axonometric + Axonomètrica + testClass diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index adef8c6075..5ec8c04e7d 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index ab149f73ef..01a2c19930 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -3286,10 +3286,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3306,6 +3302,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4504,32 +4504,32 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Před stisknutím tohoto tlačítka prosím vyberte 1, 2 nebo 3 body. Bod může být na vrcholu, ploše nebo hraně. Je-li na ploše nebo hraně, pak bude použit bod na pozici myši podél plochy nebo hrany. Je-li vybrán 1 bod, pak bude použit jako střed rotace. Jsou-li vybrány 2 body, pak bude střední bod mezi nimi středem rotace a bude vytvořena nová uživatelská osa, je-li potřeba. Jsou-li vybrány 3 body, první bod bude středem rotace a bude podél vektoru, který je normálou roviny dané třemi body. Vzdálenost a úhlová informace jsou v zobrazení reportu, což může být užitečné pro zarovnání objektů. Příslušnou vzdálenost a úhel je možné zkopírovat do schánky kliknutím se Shiftem. - Around y-axis: - Kolem osy y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Kolem osy z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Kolem osy x: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Otáčení kolem osy x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Otáčení kolem osy y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Otáčení kolem osy z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Eulerovy úhly (xy'z") + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6051,6 +6051,18 @@ Do you want to specify another directory? Vietnamese Vietnamština + + Bulgarian + Bulgarian + + + Greek + Řečtina + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7014,6 +7026,38 @@ Physical path: Fyzická cesta: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9821,6 +9865,10 @@ Do you still want to proceed? Special Ops Speciální operace + + Axonometric + Axonometrický + testClass diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index b904288bc0..51ae74ebbc 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index c85b156562..7487f3443e 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -3274,10 +3274,6 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Nicht geladene Arbeitsbereiche - Workbench Name Name des Arbeitsbereichs @@ -3294,6 +3290,10 @@ Sie können auch das Formular verwenden: John Doe <john@doe.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Um Ressourcen zu schonen, lädt FreeCAD keine Arbeitsbereiche solange sie nicht verwendet werden. Wenn sie geladen werden, können sie Zugriff auf weitere Einstellungen bezüglich ihrer Funktionalität freigeben.</p><p>Die folgenden Arbeitsbereiche sind in Ihrer Installation verfügbar:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4490,32 +4490,32 @@ The 'Status' column shows whether the document could be recovered. Bitte wählen Sie 1, 2 oder 3 Punkte, bevor Sie auf diese Schaltfläche klicken. Ein Punkt kann sich auf einem Scheitelpunkt, einer Fläche oder einer Kante befinden. Der verwendete Punkt auf einer Fläche oder Kante ist derjenige Punkt, der sich an der Mausposition entlang der Fläche oder Kante befindet. Wenn 1 Punkt ausgewählt ist, wird dieser als Drehpunkt verwendet. Wenn zwei Punkte ausgewählt werden, ist der Mittelpunkt zwischen ihnen der Drehpunkt und falls erforderlich, wird eine neue benutzerdefinierte Achse erstellt. Wenn 3 Punkte ausgewählt werden, wird der erste Punkt zum Drehpunkt und liegt auf dem Vektor, der senkrecht zu der durch die 3 Punkte definierten Ebene liegt. In der Berichtansicht werden einige Entfernungs- und Winkelinformationen bereitgestellt, die beim Ausrichten von Objekten hilfreich sein können. Wenn Sie bei gedrückter Umschalttaste + klicken, wird der entsprechende Abstand oder Winkel in die Zwischenablage kopiert. - Around y-axis: - Um die y-Achse: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Um die z-Achse: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Um die x-Achse: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Drehen um die x-Achse + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Drehen um die y-Achse + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Drehung um die z-Achse + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Eulersche Winkel (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4685,8 +4685,9 @@ The 'Status' column shows whether the document could be recovered. Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Abhängigkeiten ignorieren und mit Objekten +fortfahren die ursprünglich vor dem Öffnen +dieses Dialogs ausgewählt wurden @@ -6040,6 +6041,18 @@ Möchten Sie ein anderes Verzeichnis angeben? Vietnamese Vietnamesisch + + Bulgarian + Bulgarian + + + Greek + Griechisch + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7004,6 +7017,38 @@ Physical path: Physischer Pfad: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8780,7 +8825,7 @@ Physischer Pfad: StdCmdUserEditMode Edit mode - Edit mode + Bearbeitungsmodus Defines behavior when editing an object from tree @@ -9811,6 +9856,10 @@ Möchten Sie trotzdem fortfahren? Special Ops Spezialfunktionen + + Axonometric + Axonometrisch + testClass diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index b67377e769..a9e18ee155 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index 242d9a63db..679a2de28a 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -3292,10 +3292,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3312,6 +3308,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4510,32 +4510,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6060,6 +6060,18 @@ Do you want to specify another directory? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Ελληνικά + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7025,6 +7037,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9832,6 +9876,10 @@ Do you still want to proceed; Special Ops Ειδικές Λειτουργίες + + Axonometric + Αξονομετρική + testClass diff --git a/src/Gui/Language/FreeCAD_es-AR.qm b/src/Gui/Language/FreeCAD_es-AR.qm index 1f3cf6b3dd..3e337d3823 100644 Binary files a/src/Gui/Language/FreeCAD_es-AR.qm and b/src/Gui/Language/FreeCAD_es-AR.qm differ diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index 1f2a125f97..3a42d849b9 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -3284,10 +3284,6 @@ También puede utilizar el formulario: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Bancos de trabajo descargados - Workbench Name Nombre del banco de trabajo @@ -3304,6 +3300,10 @@ También puede utilizar el formulario: John Doe <john@doe.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Para ahorrarrecursos, FreeCAD no carga los bancos de trabajo hasta que se usen. Cargarlos puede proporcionar acceso a preferencias adicionales relacionadas con su funcionalidad.</p><p>Los siguientes bancos de trabajo están disponibles en su instalación:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4500,32 +4500,32 @@ La columna 'Estado' muestra si el documento puede ser recuperado. Por favor, seleccione 1, 2 o 3 puntos antes de hacer clic en este botón. Un punto puede estar en un vértice, cara o arista. Si en una cara o arista, el punto utilizado será el punto en la posición del mouse a lo largo de la cara o la arista. Si se selecciona 1 punto, se utilizará como centro de rotación. Si se seleccionan 2 puntos, el punto medio entre ellos será el centro de rotación y, si es necesario, se creará un nuevo eje personalizado. Si se seleccionan 3 puntos, el primer punto se convierte en el centro de rotación y se encuentra en el vector que es normal al plano definido por los 3 puntos. Se proporciona cierta información de distancia y ángulo en la vista de reporte, que puede ser útil al alinear objetos. Para su comodidad, cuando se usa la tecla Mayús + clic, la distancia o el ángulo apropiados se copian en el portapapeles. - Around y-axis: - Alrededor del eje Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Alrededor del eje Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Alrededor del eje X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotación alrededor del eje x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotación alrededor del eje y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotación alrededor del eje z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Ángulos de Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4690,13 +4690,12 @@ La columna 'Estado' muestra si el documento puede ser recuperado. &Use Original Selections - &Use Original Selections + &Usar las Selecciones Originales Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ignorar lo precedente y continuar con los objetos seleccionados con prioridad a la apertura de este dialogo @@ -6048,6 +6047,18 @@ Do you want to specify another directory? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Griego + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7009,6 +7020,38 @@ Physical path: Trayectoria física: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8785,11 +8828,11 @@ Trayectoria física: StdCmdUserEditMode Edit mode - Edit mode + Modo edición Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Determina el comportamiento cuando se edita un objeto del árbol @@ -9816,6 +9859,10 @@ Por favor, compruebe la Vista de Reportes para más detalles. Special Ops Operaciones especiales + + Axonometric + Axonométrica + testClass diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 4a4237fe9a..f17cc722b0 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 388c753e09..4d356fd898 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -3286,10 +3286,6 @@ También puede utilizar el formulario: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Bancos de trabajo descargados - Workbench Name Nombre del banco de trabajo @@ -3306,6 +3302,10 @@ También puede utilizar el formulario: John Doe <john@doe.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Para preservar recursos, FreeCAD no carga los bancos de trabajo hasta que se usen. Cargarlos puede proporcionar acceso a preferencias adicionales relacionadas con su funcionalidad.</p><p>Los siguientes bancos de trabajo están disponibles en su instalación:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4502,32 +4502,32 @@ La columna 'Estado' muestra si el documento puede ser recuperado. Por favor, seleccione 1, 2 o 3 puntos antes de hacer clic en este botón. Un punto puede estar en un vértice, cara o arista. Si en una cara o arista, el punto utilizado será el punto en la posición del mouse a lo largo de la cara o la arista. Si se selecciona 1 punto, se utilizará como centro de rotación. Si se seleccionan 2 puntos, el punto medio entre ellos será el centro de rotación y, si es necesario, se creará un nuevo eje personalizado. Si se seleccionan 3 puntos, el primer punto se convierte en el centro de rotación y se encuentra en el vector que es normal al plano definido por los 3 puntos. Se proporciona cierta información de distancia y ángulo en la vista de reporte, que puede ser útil al alinear objetos. Para su comodidad, cuando se usa la tecla Mayús + clic, la distancia o el ángulo apropiados se copian en el portapapeles. - Around y-axis: - Alrededor del eje Y-: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Alrededor del eje Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Alrededor del eje X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotación alrededor del eje x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotación alrededor del eje y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotación alrededor del eje z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Ángulos de Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4692,13 +4692,12 @@ La columna 'Estado' muestra si el documento puede ser recuperado. &Use Original Selections - &Use Original Selections + &Usar las Selecciones Originales Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ignorar lo precedente y continuar con los objetos seleccionados con prioridad a la apertura de este dialogo @@ -6050,6 +6049,18 @@ Do you want to specify another directory? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Griego + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7011,6 +7022,38 @@ Physical path: Trayectoria física: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8787,11 +8830,11 @@ Trayectoria física: StdCmdUserEditMode Edit mode - Edit mode + Modo edición Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Determina el comportamiento cuando se edita un objeto del árbol @@ -9818,6 +9861,10 @@ Por favor, compruebe la Vista de Reportes para más detalles. Special Ops Operaciones especiales + + Axonometric + Axonométrica + testClass diff --git a/src/Gui/Language/FreeCAD_eu.qm b/src/Gui/Language/FreeCAD_eu.qm index 9bbd9255e9..1fb1569dbe 100644 Binary files a/src/Gui/Language/FreeCAD_eu.qm and b/src/Gui/Language/FreeCAD_eu.qm differ diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 3d04b76fcc..b1c79c3b82 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -3293,10 +3293,6 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Deskargatutako lan-mahaiak - Workbench Name Lan-mahaiaren izena @@ -3313,6 +3309,10 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Baliabideak aurrezteko, FreeCADek ez ditu laneko mahaiak kargatzen haiek erabili nahi diren arte. Kargatzen direnean, haien funtzionaltasunari lotutako hobespen gehigarriak agertuko dira.</p><p>Honako laneko mahaiak daude erabilgarri zure instalazioan:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -3334,7 +3334,7 @@ Honako forma ere erabili dezakezu: Jon Inor <jon@inor.com> This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. - This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + Uneko abioko modulua da hau, eta automatikoki kargatu behar da. Ikusi 'Hobespenak - Orokorra - Automatikoki kargatu' hura aldatzeko. Loaded @@ -4511,32 +4511,32 @@ The 'Status' column shows whether the document could be recovered. Hautatu 1, 2 edo 3 puntu botoi hau sakatu baino lehen. Puntuak erpin batean, aurpegi batean edo ertz batean egon daitezke. Aurpegi edo ertz batean badago, erabiliko den puntua saguak aurpegian edo ertzean duen kokapenaren puntua izango da. Puntu bat hautatzen bada, biraketa-zentro gisa erabiliko da. Bi puntu hautatzen badira, bien arteko erdiko puntua izango da biraketa-zentroa eta ardatz pertsonalizatu berria sortuko da, beharrezkoa bada. Hiru puntu hautatzen badira, lehen puntua biraketa-zentroa izango da eta hiru puntuek definitutako planoarekiko normala den bektorean egongo da. Txosten-bistak distantziari eta angeluari buruzko informazioa ematen du. Informazio hori erabilgarria izan daiteke objektuak lerrokatzean. Shift + klik erabiltzen denean, distantzia edo angelu egokia arbelera kopiatuko da. - Around y-axis: - Y ardatzaren inguruan: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Z ardatzaren inguruan: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - X ardatzaren inguruan: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Biraketa X ardatzaren inguruan + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Biraketa Y ardatzaren inguruan + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Biraketa Z ardatzaren inguruan + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angeluak (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4701,13 +4701,14 @@ The 'Status' column shows whether the document could be recovered. &Use Original Selections - &Use Original Selections + Erabili &jatorrizko hautapenak Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ez ikusiarena egin mendekotasunei eta jarraitu +elkarrizketa-koadro hau ireki baino lehen jatorriz +hautatutako objektuekin @@ -6062,6 +6063,18 @@ Beste direktorio bat aukeratu nahi al duzu? Vietnamese Vietnamiera + + Bulgarian + Bulgarian + + + Greek + Greziera + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7026,6 +7039,38 @@ Physical path: Bide-izen fisikoa: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8802,11 +8847,11 @@ Bide-izen fisikoa: StdCmdUserEditMode Edit mode - Edit mode + Edizio modua Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Zuhaitzeko objektu bat editatzean izango den portaera definitzen du @@ -9833,6 +9878,10 @@ Jarraitu nahi al duzu? Special Ops Eragiketa bereziak + + Axonometric + Axonometrikoa + testClass diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index 1584656d70..a5108b9b86 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 81946d9848..88527ecafa 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -3291,10 +3291,6 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Lataamattomat työpöydät - Workbench Name Workbench Name @@ -3311,6 +3307,10 @@ Voit myös käyttää muotoa: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4509,32 +4509,32 @@ The 'Status' column shows whether the document could be recovered. Valitse 1, 2 tai 3 pistettä ennen kuin napsautat tätä painiketta. Piste voi olla kärkipisteessä, pintanäkymässä tai reunassa. Jos käytetty piste on pintanäkymässä tai reunassa, niin käytetään kohtaa hiiren sijainnissa pitkin pintanäkymää tai reunaa. Jos 1 piste on valittuna, sitä käytetään pyörimisen keskipisteenä. Jos 2 pistettä on valittuna, niin niiden välinen keskikohta on kiertämisen keskipiste ja tarvittaessa luodaan uusi mukautettu akseli. Jos on 3 pistettä valittuna, niin ensimmäinen kohta tulee kiertämisen keskipisteeksi ja se sijaitsee vektorilla, joka on normaali 3 pisteen määrittelemällä tasolla. Raportissa esitetään joitakin etäisyys- ja kulmatietoja, jotka voivat olla hyödyllisiä kohdistettaessa kohteita. Mukavuutesi vuoksi, kun Shift + napsautusta käytetään, niin sopiva etäisyys tai kulma kopioidaan leikepöydälle. - Around y-axis: - Y-akselin ympärillä: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Z-akselin ympärillä: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - X-akselin ympärillä: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Pyöritys x-akselin ympäri + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Pyöritys y-akselin ympäri + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Kierto z-akselin ympäri + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler kulmat (xy'z') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6057,6 +6057,18 @@ Haluatko valita toisen hakemiston? Vietnamese Vietnamin kieli + + Bulgarian + Bulgarian + + + Greek + Kreikaksi + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7019,6 +7031,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9826,6 +9870,10 @@ Haluatko silti jatkaa? Special Ops Erityisoperaatiot + + Axonometric + Aksonometrisiä + testClass diff --git a/src/Gui/Language/FreeCAD_fil.qm b/src/Gui/Language/FreeCAD_fil.qm index f1f1dbbc4b..67cf6dbb30 100644 Binary files a/src/Gui/Language/FreeCAD_fil.qm and b/src/Gui/Language/FreeCAD_fil.qm differ diff --git a/src/Gui/Language/FreeCAD_fil.ts b/src/Gui/Language/FreeCAD_fil.ts index f1f7e08234..3726553878 100644 --- a/src/Gui/Language/FreeCAD_fil.ts +++ b/src/Gui/Language/FreeCAD_fil.ts @@ -3291,10 +3291,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3311,6 +3307,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4510,32 +4510,32 @@ Ang haligi ng 'Katayuan' ay nagpapakita kung ang dokumento ay maaaring mabawi.Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6060,6 +6060,18 @@ Gusto mo bang tukuyin ang isa pang direktoryo? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Greek + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7023,6 +7035,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9830,6 +9874,10 @@ Do you still want to proceed? Special Ops Espesyal Ops + + Axonometric + Axonometric + testClass diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index cbb3566c82..8b85bde233 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 1b61323fcd..a525983490 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -3287,10 +3287,6 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Ateliers non chargés - Workbench Name Nom de l'atelier @@ -3307,6 +3303,10 @@ Vous pouvez également utiliser la forme : John Doe <john@doe.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Pour préserver les ressources, FreeCAD ne charge pas les ateliers avant qu'ils soient utilisés. Les charger peut permettre d'accéder à des préférences supplémentaires en lien avec leurs fonctionnalités.</p><p>Les ateliers suivants sont disponibles dans votre installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4503,32 +4503,32 @@ La colonne « État » indique si le document peut être récupéré.Veuillez sélectionner 1, 2 ou 3 points avant de cliquer sur ce bouton. Un point peut être sur un sommet, une face ou une arête. S'il est sur une face ou une arête, le point utilisé sera le point à la position de la souris le long de la face ou de l'arête. Si 1 point est sélectionné il sera utilisé comme centre de rotation. Si 2 points sont choisis le point médian sera le centre de rotation et un nouvel axe personnalisé sera créé, si nécessaire. Si 3 points sont choisis le premier point devient le centre de rotation et se trouve sur le vecteur qui est perpendiculaire au plan défini par les 3 points. Des informations de distance et d’angle sont fournies dans la vue rapport, ce qui peut être utile pour aligner des objets. Pour plus de commodité, lors de l'utilisation de Maj + clic la distance appropriée ou l’angle sont copiés dans le presse-papiers. - Around y-axis: - Autour de l'axe y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Autour de l'axe z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Autour de l'axe x: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation autour de l'axe X + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation autour de l'axe Y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation autour de l'axe z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Angle d'Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4693,13 +4693,13 @@ La colonne « État » indique si le document peut être récupéré. &Use Original Selections - &Use Original Selections + &Utiliser les sélections originales Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ignorer les dépendances et continuer avec les objets +initialement sélectionnés avant d'ouvrir ce dialogue @@ -6049,6 +6049,18 @@ Do you want to specify another directory? Vietnamese Vietnamien + + Bulgarian + Bulgarian + + + Greek + Grec + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7010,6 +7022,38 @@ Physical path: Chemin physique : + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8786,11 +8830,11 @@ Chemin physique : StdCmdUserEditMode Edit mode - Edit mode + Mode d'édition Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Définit le comportement lors de l'édition d'un objet depuis l'arbre @@ -9817,6 +9861,10 @@ Voulez-vous tout de même continuer ? Special Ops Opérations spéciales + + Axonometric + Axonométrique + testClass diff --git a/src/Gui/Language/FreeCAD_gl.qm b/src/Gui/Language/FreeCAD_gl.qm index 4f92bdd5a8..ae88d8c2d1 100644 Binary files a/src/Gui/Language/FreeCAD_gl.qm and b/src/Gui/Language/FreeCAD_gl.qm differ diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index b373a013ed..48a15f61c0 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -3292,10 +3292,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3312,6 +3308,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4510,32 +4510,32 @@ A columna 'Estado' amosa se é posible recuperar o documento. Fai o favor de escolmar 1, 2 ou 3 puntos antes de facer clic neste botón. Un punto pode estar nun vértice, face ou bordo. Se está nunha face ou bordo, o punto empregado será o punto da posición do rato ao longo da face ou bordo. Se 1 punto é escolmado, vai ser usado coma centro de rotación. Se son 2 puntos escolmados o punto medio entre eles será o centro de rotación e crearase un novo eixo persoal, se fose necesario. Se son 3 puntos os escolmados, o primeiro punto convértese en centro de rotación e atópase no vector que é normal ao plano definido polos 3 puntos. Proporciónase certa información de distancia e ángulo na vista de informe, que pode ser útil ao aliñar obxectos. Para o seu convir, cando se usa Maius + clic, a distancia ou o ángulo apropiados cópianse ó portapapeis. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotación ó redor do eixe x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotación ó redor do eixe y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotación ó redor do eixe z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Ángulos de Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6063,6 +6063,18 @@ Quere especificar outro directorio? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Grego + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7024,6 +7036,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9831,6 +9875,10 @@ Do you still want to proceed? Special Ops Operacións especiais + + Axonometric + Axonométrica + testClass diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index c6341ac0ac..fec178bb26 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index 061bf1ac67..019179b9b9 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -3318,10 +3318,6 @@ Možete koristiti i obrazac: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3338,6 +3334,10 @@ Možete koristiti i obrazac: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4553,32 +4553,32 @@ The 'Status' column shows whether the document could be recovered. Odaberite 1, 2 ili 3 točke prije nego kliknete ovaj gumb. Točka može biti tjemena točka, točka lica ili ruba. Ako se koristi na licu ili rubu točka će biti točka na položaju miša uzduž lica ili ruba. Ako je 1 točka odabrana ona će se koristiti kao centar rotacije. Ako su 2 točke odabrane središnja točka između njih će biti centar rotacije i po potrebi će se stvoriti nova prilagođena os. Ako su 3 točke odabrane prva točka postaje centar rotacije i leži na vektoru koji je normala na ravninu definiranu sa 3 točke. Neke informacije udaljenosti i kuta su dane u prikazu izvještaja, što može biti korisno kod poravnavanja objekata. Radi vaše udobnosti kada se koristi "Shift + klik" odgovarajuća udaljenost ili kut je kopiran(a) u međuspremnik. - Around y-axis: - Oko y-osi + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Oko z-osi + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Oko x-osi + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - rotacija oko x-osi + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - rotacija oko y-osi + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - rotacija oko z-osi + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Eulerovih kuteva (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6106,6 +6106,18 @@ Do you want to specify another directory? Vietnamese Vijetnamski + + Bulgarian + Bulgarian + + + Greek + Grčki + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7071,6 +7083,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9893,6 +9937,10 @@ Molimo provjerite Pregled izvještaja za više pojedinosti. Special Ops Specijalne radnje + + Axonometric + Aksonometrijski + testClass diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index 1d988004ff..c2163f5036 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 2f09088c0b..5f53a403f0 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -3285,10 +3285,6 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Betöltetlen munkafelületek - Workbench Name Munkafelület neve @@ -3305,6 +3301,10 @@ Használhatja az űrlapot is: Gipsz Jakab <gipsz@jakab.hu> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Az erőforrások megőrzése érdekében a FreeCAD használatukig nem tölt be munkafelületeket. Ezek betöltése hozzáférést biztosíthat további funkcionalitásukkal kapcsolatos további beállításokhoz.</p> <p>A következő munkafelületek állnak rendelkezésre a telepítéshez, de még nincsenek betöltve:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4503,32 +4503,32 @@ Az 'Állapot' oszlop tájékoztatja a visszaállítás sikerességéről.Kérjük, válasszon 1, 2 vagy 3 pontot ennek a gombnak a megnyomása előtt. Egy pont lehet a végponton, felületen vagy élen. Ha egy felületre vagy élre használja a pontot az egér helyzetének pontja lesz a felület vagy él mentén. Ha 1 pontot választ ki akkor az az elforgatás középpontját határozza meg. 2 pont kijelölésekor a két pont közti lesz az elforgatás középpontja, és egy új egyéni tengely jön létre, ha szükséges. Ha 3 pontot jelöltünk az első pont lesz az elforgatás középpontja, és azon a vektoron fekszik, mely síkot a 3 pont alapértelmezés meghatározza. Néhány távolság és szög információt a jelentésben tekinthet meg, ami hasznos lehet az tárgyak igazításához. Az Ön kényelme érdekében Shift + kattintás használata esetén a megfelelő távolság vagy szög másolódik a vágólapra. - Around y-axis: - Az y tengely körül: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Az z tengely körül: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Az x tengely körül: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Forgatás az x tengely körül + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Forgatás az y tengely körül + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Forgatás az z tengely körül + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler-szögek (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4693,13 +4693,13 @@ Az 'Állapot' oszlop tájékoztatja a visszaállítás sikerességéről. &Use Original Selections - &Use Original Selections + Eredeti kijelölések használata (&U) Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Függőségek figyelmen kívül hagyása és eredetileg ezen +párbeszédpanel megnyitása előtt kiválasztott tárgyak folytatása @@ -6054,6 +6054,18 @@ Meg szeretne adni egy másik könyvtárat? Vietnamese Vietnami + + Bulgarian + Bulgarian + + + Greek + Görög + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7017,6 +7029,38 @@ Physical path: Fizikai útvonal: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8793,11 +8837,11 @@ Fizikai útvonal: StdCmdUserEditMode Edit mode - Edit mode + Szerkesztőmód Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Viselkedést határoz meg egy tárgy fa nézetben történő szerkesztésekor @@ -9824,6 +9868,10 @@ Még mindig fojtatni szeretné? Special Ops Speciális lehetőségek + + Axonometric + Axonometric + testClass diff --git a/src/Gui/Language/FreeCAD_id.qm b/src/Gui/Language/FreeCAD_id.qm index 0019d87a75..13fabd49dd 100644 Binary files a/src/Gui/Language/FreeCAD_id.qm and b/src/Gui/Language/FreeCAD_id.qm differ diff --git a/src/Gui/Language/FreeCAD_id.ts b/src/Gui/Language/FreeCAD_id.ts index c8c5b08630..ff504570a7 100644 --- a/src/Gui/Language/FreeCAD_id.ts +++ b/src/Gui/Language/FreeCAD_id.ts @@ -3287,10 +3287,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3307,6 +3303,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4503,32 +4503,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6043,6 +6043,18 @@ Do you want to specify another directory? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Yunani + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7001,6 +7013,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9808,6 +9852,10 @@ Do you still want to proceed? Special Ops Pasukan khusus + + Axonometric + Axonometrik + testClass diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index aa7fc04016..2964ef4fe4 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index f3a380ada0..4dc9654fa6 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -3290,10 +3290,6 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Ambienti di lavoro scaricati - Workbench Name Nome Workbench @@ -3310,6 +3306,10 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Per preservare le risorse, FreeCAD non carica gli ambienti di lavoro finché non vengono utilizzati. Il loro caricamento può fornire l'accesso a preferenze aggiuntive relative alla loro funzionalità.</p><p>I seguenti ambienti di lavoro sono disponibili nella tua installazione, ma non sono ancora caricati:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4506,32 +4506,32 @@ The 'Status' column shows whether the document could be recovered. Selezionare 1, 2 o 3 punti prima di fare clic su questo pulsante. Il punto può essere su un vertice, una faccia o un bordo. Se viene scelto su una faccia o bordo il punto utilizzato è il punto in corrispondenza della posizione del mouse lungo la faccia o il bordo. Se viene selezionato solo 1 punto, esso è usato come centro di rotazione. Se sono selezionati 2 punti, il centro di rotazione è il punto medio tra di essi e viene creato un nuovo asse personalizzato, se necessario. Se vengono selezionati 3 punti, il primo punto diventa il centro di rotazione e giace sul vettore che è normale rispetto al piano definito dai 3 punti. Alcune informazioni sulla distanza e sull'angolo sono fornite nella vista Report, questo può essere utile quando si allineano gli oggetti. Per praticità quando si usa Maiusc + clic, la distanza o l'angolo appropriati vengono copiati negli Appunti. - Around y-axis: - Intorno all'asse y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Intorno all'asse z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Intorno all'asse x: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotazione attorno all'asse x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotazione attorno all'asse y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotazione attorno all'asse z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Angoli di Eulero (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4696,13 +4696,13 @@ The 'Status' column shows whether the document could be recovered. &Use Original Selections - &Use Original Selections + &Usa Selezioni Originali Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ignora le dipendenze e procedi con gli oggetti +originariamente selezionati prima di aprire questa finestra @@ -6056,6 +6056,18 @@ Vuoi specificare un'altra cartella? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Greek + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7020,6 +7032,38 @@ Physical path: Percorso fisico: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8796,11 +8840,11 @@ Percorso fisico: StdCmdUserEditMode Edit mode - Edit mode + Modalità modifica Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Definisce il comportamento quando si modifica un oggetto dall'albero @@ -9827,6 +9871,10 @@ Si desidera ancora procedere? Special Ops Operazioni speciali + + Axonometric + Assonometria + testClass diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index b967c44b26..a1dafc5e5c 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index bda16611c0..4d4a2203b7 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -3262,10 +3262,6 @@ John Doe <john@doe.com> 形式を使用することもできます。 Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - ロードされていないワークベンチ - Workbench Name Workbench Name @@ -3282,6 +3278,10 @@ John Doe <john@doe.com> 形式を使用することもできます。<html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4478,32 +4478,32 @@ The 'Status' column shows whether the document could be recovered. このボタンをクリックする前に1つ、2つ、または3つの点を選択してください。 点は頂点、面、またはエッジ上にあります。面またはエッジ上の点を使用する場合は面またはエッジに沿ったマウス位置にある点を使います。1つの点を選択した場合には点が回転中心として使用されます。2つの点を選択した場合にはその中点が回転中心となり、必要に応じて新しいカスタム軸が作成されます。3つの点を選択した場合には1つ目の点が回転中心となり、3点によって定義される平面の法線となるベクトル上に配置されます。距離と角度の情報はレポートビューに表示されます。この情報はオブジェクトを配置する際に便利です。簡単のために Shift + クリックで適切な距離と角度がクリップボードにコピーされます。 - Around y-axis: - Y軸周り: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Z軸周り: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - X軸周り: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - X軸周りの回転 + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Y軸周りの回転 + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Z軸周りの回転 + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - オイラー角度 (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4668,13 +4668,13 @@ The 'Status' column shows whether the document could be recovered. &Use Original Selections - &Use Original Selections + 元の選択を使用 (&U) Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + 依存関係を無視し、このダイアログを開く前に最初に選択されたオブジェクト +を続行します @@ -6024,6 +6024,18 @@ Do you want to specify another directory? Vietnamese ベトナム語 + + Bulgarian + Bulgarian + + + Greek + ギリシャ語 + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -6983,6 +6995,38 @@ Physical path: 物理パス: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8759,11 +8803,11 @@ Physical path: StdCmdUserEditMode Edit mode - Edit mode + 編集モード Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + ツリーからオブジェクトを編集するときの動作を定義します。 @@ -9790,6 +9834,10 @@ Do you still want to proceed? Special Ops 特殊設定 + + Axonometric + 不等角投影 + testClass diff --git a/src/Gui/Language/FreeCAD_lt.qm b/src/Gui/Language/FreeCAD_lt.qm index 0f58fcf62b..73c7bf4362 100644 Binary files a/src/Gui/Language/FreeCAD_lt.qm and b/src/Gui/Language/FreeCAD_lt.qm differ diff --git a/src/Gui/Language/FreeCAD_lt.ts b/src/Gui/Language/FreeCAD_lt.ts index c143659000..8f115b428f 100644 --- a/src/Gui/Language/FreeCAD_lt.ts +++ b/src/Gui/Language/FreeCAD_lt.ts @@ -3291,10 +3291,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3311,6 +3307,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4507,32 +4507,32 @@ The 'Status' column shows whether the document could be recovered. Prieš paspausdami šį mygtuką, pažymėkite 1–3 taškus. Taškas turi būti viršūnėje, sienoje ar kraštinėje. Jei taškas yra sienoje ar kraštinėje, naudojamas taškas bus žymeklio vietoje esantis taškas, sutampantis su siena ar kraštine. Jei pasirinktas vienas taškas, jis bus naudojamas kaip sukimosi taškas. Jei pasirinkti du taškai, tai jas jungiančios atkarpos vidurio taškas bus naudojamas kaip sukimosi taškas; jei reikės, bus sukurta ir sukimosi ašis. Jei pasirinkti trys taškai, pirmasis pasirinktas taškas bus sukimosi taškas, kuris yra vektoriuje, statmename trimis taškais apibrėžtai plokštumai. Tam tikri atstumo ir kampo duomenys, naudingi daiktų sutapdinimui, bus pateikiami ataskaitos rodinyje. Jūsų patogumui, paspaudus „Shift“ ir pelės mygtuką, atitinkamas atstumas ar kampas bus nukopijuotas į mainų sritį. - Around y-axis: - Apie y ašį: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Apie z ašį: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Apie x ašį: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Sukimas apie x ašį + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Sukimas apie y ašį + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Sukimas apie z ašį + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Oilerio kampai (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6059,6 +6059,18 @@ Ar norėtumėte nurodyti kitą aplanką? Vietnamese Vietnamiečių + + Bulgarian + Bulgarian + + + Greek + Graikų + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7022,6 +7034,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9829,6 +9873,10 @@ Ar vis dar norite tęsti? Special Ops Ypatingi veiksmai + + Axonometric + Aksonometrinis + testClass diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index 2458819cc3..3c42cd4f21 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index ed07610c1a..8110955846 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -3288,10 +3288,6 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Ongeladen werkbanken - Workbench Name Workbench Name @@ -3308,6 +3304,10 @@ U kunt ook het formulier gebruiken: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4504,32 +4504,32 @@ The 'Status' column shows whether the document could be recovered. Gelieve 1, 2 of 3 punten te selecteren voordat u op deze knop klikt. Een punt kan op een eindpunt, vlak of rand zijn. Indien op een vlak of rand, zal het gebruikte punt het punt zijn dat zich op de positie van de muis langs het vlak of de rand bevindt. Als 1 punt wordt geselecteerd, wordt het gebruikt als draaipunt. Als 2 punten worden geselecteerd, is het middelpunt daarvan het draaipunt en wordt er zo nodig een nieuwe aangepaste as gemaakt. Als 3 punten worden geselecteerd, wordt het eerste punt het draaipunt en ligt het op de vector die normaal is voor het vlak gedefinieerd door de 3 punten. Enige informatie over afstand en hoek wordt in de rapportweergave gegeven, wat nuttig kan zijn bij het uitlijnen van objecten. Voor uw gemak wordt, wanneer Shift + klik gebruikt worden, de juiste afstand of hoek naar het klembord gekopieerd. - Around y-axis: - Rond de y-as: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Rond de z-as: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Rond de x-as: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotatie rond de x-as + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotatie rond de y-as + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotatie rond de z-as + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Hoeken van Euler (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6049,6 +6049,18 @@ Wilt u een andere map opgeven? Vietnamese Vietnamees + + Bulgarian + Bulgarian + + + Greek + Grieks + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7011,6 +7023,38 @@ Physical path: Fysiek pad: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9818,6 +9862,10 @@ Wilt u toch doorgaan? Special Ops Speciale functies + + Axonometric + Axonometrisch + testClass diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 5ce2ab75ce..80c482d1ef 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 49c29a3628..ed1665c696 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -3288,10 +3288,6 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Niezaładowane Środowiska pracy - Workbench Name Nazwa środowiska pracy @@ -3308,6 +3304,10 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Aby oszczędzać zasoby, FreeCAD nie ładuje środowisk pracy, dopóki nie zostaną użyte. Ich załadowanie może zapewnić dostęp do dodatkowych preferencji związanych z ich funkcjonalnością.</p><p>Następujące środowiska pracy są dostępne w twojej instalacji, ale nie są jeszcze załadowane:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -3321,7 +3321,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> If checked - Jeśli zaznaczone + Jeśli opcja jest zaznaczona will be loaded automatically when FreeCAD starts up @@ -4507,32 +4507,32 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany.Proszę wybrać 1, 2 lub 3 punkty przed kliknięciem na ten przycisk. Punktem może być wierzchołek, ściana lub krawędź. Jeśli zostanie wybrany punkt na ścianie lub na krawędzi, zostanie użyty punkt pozycji myszy na tej ścianie lub wzdłuż tej krawędzi. Jeśli zostanie wybrany 1 punkt, to zostanie on użyty jako środek obrotu. Jeśli zostaną wybrane 2 punkty, to punkt pomiędzy nimi zostanie wybrany jako środek obrotu, a te punkty utworzą nową oś, jeśli jest taka potrzeba. Jeśli zostaną wybrane 3 punkty to pierwszy punkt zostanie użyty jako środek obrotu i jako wierzchołek wektora normalnego do płaszczyzny zdefiniowanej przez te 3 punkty. Niektóre odległości i kąty są pokazane na widoku raportu, mogę być one pomocne przy dopasowywaniu obiektów. Dla Twojej wygody, gdy naciśniesz Shift+Click, to odpowiednia odległość lub kąt są skopiowane do schowka. - Around y-axis: - W okolicy osi Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - W okolicy osi Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - W okolicy osi X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Obrót wokół osi X + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Obrót wokół osi Y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Obrót wokół osi Z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Kąty Eulera (XY'Z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4697,13 +4697,13 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. &Use Original Selections - &Use Original Selections + &Użyj wyboru początkowego Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Ignoruj zależności i kontynuuj z obiektami +wstępnie wybranymi przed otwarciem tego okna @@ -4849,7 +4849,7 @@ originally selected prior to opening this dialog Selects and fits this object in the 3D window - Wybiera i lokalizuje ten obiekt w oknie widoku 3D + Zaznacza i dopasowuje ten obiekt w oknie widoku 3D Go to selection @@ -6052,6 +6052,18 @@ Do you want to specify another directory? Vietnamese wietnamski + + Bulgarian + Bulgarian + + + Greek + grecki + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7013,6 +7025,38 @@ Physical path: Ścieżka fizyczna: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8092,7 +8136,7 @@ Physical path: Placement... - Umiejscowienie... + Umiejscowienie ... Place the selected objects @@ -8789,11 +8833,11 @@ Physical path: StdCmdUserEditMode Edit mode - Edit mode + Tryb edycji Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Definiuje zachowanie podczas edycji obiektu w widoku drzewa @@ -9820,6 +9864,10 @@ Czy nadal chcesz kontynuować? Special Ops Opcje specjalne + + Axonometric + Aksonometryczny + testClass diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index fa9cfb64d4..5cfc6139ab 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 780a3aaa7b..08645824b7 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -3280,10 +3280,6 @@ Você também pode usar o formulário: João Silva <joao@silva.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Bancadas não carregadas - Workbench Name Nome da bancada @@ -3300,6 +3296,10 @@ Você também pode usar o formulário: João Silva <joao@silva.com><html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4496,32 +4496,32 @@ The 'Status' column shows whether the document could be recovered. Por favor, selecione 1, 2 ou 3 pontos antes de clicar neste botão. Um ponto pode estar em um vértice, face ou aresta. Se em uma face ou borda, o ponto usado será o ponto na posição do mouse ao longo da face ou da borda. Se 1 ponto for selecionado, ele será usado como centro de rotação. Se 2 pontos forem selecionados, o ponto médio entre eles será o centro de rotação e um novo eixo personalizado será criado, se necessário. Se 3 pontos são selecionados, o primeiro ponto se torna o centro de rotação e fica no vetor que é normal ao plano definido pelos 3 pontos. Algumas informações de distância e ângulo são fornecidas na visão do relatório, o que pode ser útil ao alinhar objetos. Para sua conveniência, quando Shift + clique é usado, a distância ou ângulo apropriado é copiado para a área de transferência. - Around y-axis: - Em torno do eixo Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Em torno do eixo Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Em torno do eixo X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotação em torno do eixo x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotação em torno do eixo y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotação em torno do eixo z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Ângulos de Euler (XY'Z") + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6041,6 +6041,18 @@ Do you want to specify another directory? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Grego + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -6999,6 +7011,38 @@ Physical path: Caminho físico: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9806,6 +9850,10 @@ Deseja prosseguir mesmo assim? Special Ops Operações especiais + + Axonometric + Axonométrica + testClass diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 7b43ea08ae..9ea05cfc96 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 546d9bf6d3..ba8d263e3c 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -3287,10 +3287,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3307,6 +3303,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4503,32 +4503,32 @@ The 'Status' column shows whether the document could be recovered. Por favor selecione 1, 2 ou 3 pontos antes de clicar neste botão. Um ponto pode estar num vértice, face ou aresta. Se estiver numa face ou aresta, o ponto utilizado será o ponto na posição do rato ao longo da face ou aresta. Se for selecionado 1 ponto será usado como o centro de rotação. Se forem selecionados 2 pontos o ponto médio entre eles será o centro de rotação e será criado um novo eixo personalizado, se necessário. Se forem selecionados 3 pontos o primeiro ponto torna-se o centro de rotação e encontra-se sobre o vetor normal ao plano definido por 3 pontos. Algumas informações de distância e ângulo são fornecidas na vista de relatório, que pode ser útil ao alinhar objetos. Para sua conveniência quando Shift + clique for usado a distância adequada ou ângulo é copiado para a área de transferência. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotação em torno do eixo-x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotação em torno do eixo-y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotação em torno do eixo-z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6052,6 +6052,18 @@ Quer especificar outro diretório? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Grego + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7012,6 +7024,38 @@ Physical path: Caminho físico: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9819,6 +9863,10 @@ Ainda deseja prosseguir? Special Ops Operações especiais + + Axonometric + Axanométrico + testClass diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index 3cf42cf176..f7668caabf 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 5b999fd7a7..061a45f3a8 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -3288,10 +3288,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3308,6 +3304,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4504,32 +4504,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6052,6 +6052,18 @@ Doriţi să specificaţi un alt director? Vietnamese Vietnameză + + Bulgarian + Bulgarian + + + Greek + Greacă + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7013,6 +7025,38 @@ Physical path: Cale fizică: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9820,6 +9864,10 @@ Do you still want to proceed? Special Ops Operaţii speciale + + Axonometric + Axonometric + testClass diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index 1339699eba..e1e09c935d 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 5c2f8fa325..985228d995 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -3289,10 +3289,6 @@ Opening mode: If you defined a hinge in this component or any other earlier in t Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Незагруженные верстаки - Workbench Name Название верстака @@ -3309,6 +3305,10 @@ Opening mode: If you defined a hinge in this component or any other earlier in t <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Чтобы сэкономить ресурсы, FreeCAD не загружает верстаки до тех пор, пока они не будут использованы. После загрузки верстака, если это предусмотрено в настройках может появится дополнительный раздел с настройкам, связанным с функциональностью загруженного верстака.</p><p>В текущий момент доступны следующие верстаки, которые можно загрузить, если это требуется:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4508,32 +4508,32 @@ The 'Status' column shows whether the document could be recovered. Пожалуйста, выберите 1, 2 или 3 точки, прежде чем нажать эту кнопку. Точка может быть на вершине, грани или кромке. Если используемая точка на грани или кромке, то она будет точкой на позиции мыши вдоль грани или кромки. Если выбрана 1 точка, то она будет использоваться в качестве центра вращения. Если выбраны 2 точки, то посредине между ними будет центр вращения, и, при необходимости, будет создана новая пользовательская ось. Если выбраны 3 точки, то первая точка становится центром вращения, и будет лежать на векторе, который перпендикулярен плоскости, проходящей через эти 3 точки. Некоторые расстояния и углы содержатся в отчёте, который может быть полезен при выравнивании объектов. Для Вашего удобства при использовании Shift + щелчок мыши соответствующее расстояние или угол копируются в буфер обмена. - Around y-axis: - Вокруг оси y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Вокруг оси z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Вокруг оси x: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Поворот вокруг оси X + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Поворот вокруг оси Y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Поворот вокруг оси Z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Углы Эйлера (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6055,6 +6055,18 @@ Do you want to specify another directory? Vietnamese Вьетнамский + + Bulgarian + Bulgarian + + + Greek + Греческий + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7015,6 +7027,38 @@ Physical path: Физический путь: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9822,6 +9866,10 @@ Do you still want to proceed? Special Ops Специальные операции + + Axonometric + Аксонометрия + testClass diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm index ac2e9a5141..8197a4d7e1 100644 Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 564dcf3e54..90987f7d58 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -3292,10 +3292,6 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Odložena delovna okolja - Workbench Name Ime delovnega okolja @@ -3312,6 +3308,10 @@ Lahko uporabite tudi obliko: Neznanec <ne@znanec.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>Zaradi varčevanja z viri FreeCAD ne naloži delovnih okolij, dokler se jih ne uporabi. Če jih naložite, vam bodo lahko na voljo dodatne prednastavitve, ki so povezane z njihovimi zmožnostmi.</p><p>V vaši namestitvi so na voljo naslednja delovna okolja:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4508,32 +4508,32 @@ The 'Status' column shows whether the document could be recovered. Izberite 1, 2 ali 3 točke preden kliknete ta gumb. Točka je lahko na ogljišču, ploskvi ali na robu. Če bo na ploskvi ali robu, bo uporabljena točka položaja kazalke na ploskvi ali robu. Če je izbrana 1 točka, bo uporabljena kot središče sukanja. Če sta izbrani 2 točki, bo točka na sredini med njima središče sukanja in ustvarjena bo nova os po meri, če bo potrebno. Če so izbrane 3 točke, prva točka postane središče vrtenja in leži na vektorju, ki je pravokoten na ravnino, določeno s temi 3 točkami. Nekateri podatki o razdaljah in kotih so podani v poročilnem pogledu, ki je lahko koristen posebno pri poravnavanju objektov. Za lažjo uporabo se s Premakni + klik ustrezna razdalja ali kot kopira v odložišče. - Around y-axis: - Okoli osi y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Okoli osi z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Okoli osi x: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Sukanje okoli osi x + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Sukanje okoli osi y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Sukanje okoli osi z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Eulerjevi koti (xy'z") + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -4698,13 +4698,13 @@ The 'Status' column shows whether the document could be recovered. &Use Original Selections - &Use Original Selections + &Uporabi izvorni izbor Ignore dependencies and proceed with objects originally selected prior to opening this dialog - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog + Prezri odvisnosti in nadaljuj s predmeti, ki so bili +izbrani pred odprtjem tega pogovrnega okna @@ -6059,6 +6059,18 @@ Ali želite navesti drugo mapo? Vietnamese Vietnamščina + + Bulgarian + Bulgarian + + + Greek + Grščina + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7023,6 +7035,38 @@ Physical path: Tvarna pot: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8799,11 +8843,11 @@ Tvarna pot: StdCmdUserEditMode Edit mode - Edit mode + Način urejanja Defines behavior when editing an object from tree - Defines behavior when editing an object from tree + Opredeljuje obnašanje pri urejanju predmeta iz drevesa @@ -9830,6 +9874,10 @@ Ali želite vseeno nadaljevati? Special Ops Posebne možnosti + + Axonometric + Aksonometrično + testClass diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index 8e4a685412..d5ce49931f 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 0ec1a95413..154d4019c5 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -3292,10 +3292,6 @@ Du kan också använda formuläret: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Oladdade arbetsbänkar - Workbench Name Workbench Name @@ -3312,6 +3308,10 @@ Du kan också använda formuläret: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4506,32 +4506,32 @@ The 'Status' column shows whether the document could be recovered. Vänligen välj en, två eller tre punkter och tryck sedan på denna knapp. En punkt kan antingen vara en hörnpunkt eller ligga på en kant eller yta. Om en kant eller yta väljs, kommer punkten ligga vid musens position på kanten eller ytan. Om en punkt är vald kommer den vara rotationscentrum. Om två punkter är valda kommer mittpunkten mellan dom att vara rotationscentrum, och en ny axel kommer skapas vid behov. Om tre punkter är valda kommer den första punkten att vara rotationscentrum och ligga på normalvektorn mot det plan som definieras av dom tre valda punkterna. Viss distans- och vinkelinformation är tillgänglig i rapport-vyn, vilket kan vara användbart när objekt ska justeras. För enkelhetens skull så kopieras lämplig distans och vinkel vid skift + klick. - Around y-axis: - Runt y-axeln: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Runt z-axeln: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Runt x-axeln: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation runt x-axeln + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation runt y-axeln + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation runt z-axeln + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Eulervinklar (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6057,6 +6057,18 @@ Vill du ange en annan katalog? Vietnamese Vietnamesiska + + Bulgarian + Bulgarian + + + Greek + Grekiska + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7021,6 +7033,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9826,6 +9870,10 @@ Vill du fortfarande fortsätta? Special Ops Special operationer + + Axonometric + Axonometrisk + testClass diff --git a/src/Gui/Language/FreeCAD_tr.qm b/src/Gui/Language/FreeCAD_tr.qm index 11e75789ba..1bf81124ef 100644 Binary files a/src/Gui/Language/FreeCAD_tr.qm and b/src/Gui/Language/FreeCAD_tr.qm differ diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 4da70a81b5..6faf3a1649 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -3285,10 +3285,6 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Çalışma Tezgahları Yüklenmedi - Workbench Name Tezgah Adı @@ -3305,6 +3301,10 @@ Ayrıca formu da kullanabilirsiniz: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body> <p> Kaynakları korumak için FreeCAD, kullanılıncaya kadar çalışma tezgahlarını yüklemez. Bunları yüklemek, işlevleriyle ilgili ek tercihlere erişim sağlayabilir. </p> <p> Aşağıdaki çalışma tezgahları kurulumunuzda mevcuttur, ancak henüz yüklenmemiştir: </p> </body> </html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4503,32 +4503,32 @@ The 'Status' column shows whether the document could be recovered. Bu tuşa basmadan önce lütfen 1, 2 veya 3 nokta seçin. Bir nokta, yüzey veya kenarda bir nokta olabilir. Bir yüzey veya kenarda kullanılan nokta, yüzey veya kenar boyunca fare konumunda bulunan nokta olacaktır. 1 nokta seçilirse, dönüş merkezi olarak kullanılacaktır. 2 nokta seçilirse, aralarındaki orta nokta, dönme merkezi olacak ve gerekirse yeni bir özel eksen oluşturulacaktır. 3 nokta seçilirse, ilk nokta dönme merkezi olur ve 3 nokta tarafından tanımlanan düzlemde normal olan vektör üzerinde bulunur. Nesneleri hizalarken faydalı olabilecek, rapor görünümünde bazı mesafe ve açı bilgileri sağlanır. Shift + tıklama kullanıldığında kolaylık için uygun mesafe veya açı panoya kopyalanır. - Around y-axis: - Y ekseni etrafında: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Z ekseni etrafında: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - X ekseni etrafında: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - X ekseni etrafında dönme + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Y ekseni etrafında dönme + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Z ekseni etrafında dönme + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler açıları (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6052,6 +6052,18 @@ Başka bir dizin belirlemek ister misiniz? Vietnamese Vietnamca + + Bulgarian + Bulgarian + + + Greek + Yunanca + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7011,6 +7023,38 @@ Physical path: Fiziksel yol: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9817,6 +9861,10 @@ Hala ilerlemek istiyor musunuz? Special Ops Özel Ops + + Axonometric + Aksonometrik + testClass diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index 4462d96231..f23f587d19 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 0c7f576579..287ceaa20b 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -3289,10 +3289,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Вивантажені робочі середовища - Workbench Name Назва робочого середовища @@ -3309,6 +3305,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4507,32 +4507,32 @@ The 'Status' column shows whether the document could be recovered. Будь ласка, виберіть 1, 2 або 3 точки перед натисканням на цю кнопку. Точка може бути на вершині, поверхні або на ребрі. Якщо вибрати на поверхні або на ребрі, то обраною буде точка найближча до курсора, що належить поверхні або ребру. Якщо вибрано 1 точку, вона буде використовуватися як центр обертання. При виборі двох точок, центром обертання буде середина між ними, а також при потребі буде додано нову вісь обертання. При виборі 3 точок, перша точка стає центром обертання і лежить на векторі, що буде нормаллю до площини утвореної трьома вибраними точками. У додатвовій інформації також надаються дані про відстань та кут. Це може бути корисним для вирівнювання об'єктів. Для вашої зручності при кліку з натисненим Shift відповідна відстань або кут буде скопійовано в буфер обміну. - Around y-axis: - Навколо осі Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Навколо осі Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Навколо осі X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Обертання навколо осі Х + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Обертання навколо осі У + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Обертання навколо осі Z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Ейлерові кути (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6055,6 +6055,18 @@ Do you want to specify another directory? Vietnamese В’єтнамська + + Bulgarian + Bulgarian + + + Greek + Грецька + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7017,6 +7029,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -8793,7 +8837,7 @@ Physical path: StdCmdUserEditMode Edit mode - Edit mode + Режим редагування Defines behavior when editing an object from tree @@ -9824,6 +9868,10 @@ Do you still want to proceed? Special Ops Спеціальні операції + + Axonometric + Аксонометрія + testClass diff --git a/src/Gui/Language/FreeCAD_val-ES.qm b/src/Gui/Language/FreeCAD_val-ES.qm index e7a225ce45..ccfc6d3090 100644 Binary files a/src/Gui/Language/FreeCAD_val-ES.qm and b/src/Gui/Language/FreeCAD_val-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index 706ebef86d..c4d90d77b1 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -3279,10 +3279,6 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3299,6 +3295,10 @@ També podeu utilitzar la forma: Joan Peris <joan@peris.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4494,32 +4494,32 @@ La columna 'Estat? mostra si el document es pot recuperar. Seleccioneu 1, 2 o 3 punts abans de fer clic en aquest botó. Un punt pot estar en un vèrtex, cara o aresta. Si esteu en una cara o aresta, el punt utilitzat serà el punt en la cara o aresta en la posició del ratolí. Si 1 punt és seleccionat serà utilitzat com a centre de rotació. Si se seleccionen 2 punts, el punt mig entre ells serà el centre de rotació i un nou eix personalitzat es crearà, si és necessari. Si se seleccionen 3 punts, el primer punt es converteix en el centre de rotació i es troba en el vector que és normal al pla definit per 3 punts. Alguns detalls de distància i angle es proporcionen en la visualització d'informe, que pot ser útil per a alinear objectes. Per a la vostra comoditat, quan feu Majúscules + clic s'utilitza la distància adequada o l'angle es copia al porta-retalls. - Around y-axis: - Al voltant de l'eix Y: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Al voltant de l'eix Z: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Al voltant de l'eix X: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotació al voltant de l'eix X + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotació al voltant de l'eix Y + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotació al voltant de l'eix Z + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Angles d'Euler (Xy'Z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6036,6 +6036,18 @@ Do you want to specify another directory? Vietnamese Vietnamita + + Bulgarian + Bulgarian + + + Greek + Grec + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -6994,6 +7006,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9801,6 +9845,10 @@ Encara voleu continuar? Special Ops Operacions especials + + Axonometric + Axonomètrica + testClass diff --git a/src/Gui/Language/FreeCAD_vi.qm b/src/Gui/Language/FreeCAD_vi.qm index 2dcddd5962..d1d011f01f 100644 Binary files a/src/Gui/Language/FreeCAD_vi.qm and b/src/Gui/Language/FreeCAD_vi.qm differ diff --git a/src/Gui/Language/FreeCAD_vi.ts b/src/Gui/Language/FreeCAD_vi.ts index ee46fbfc9e..75b1b10d6a 100644 --- a/src/Gui/Language/FreeCAD_vi.ts +++ b/src/Gui/Language/FreeCAD_vi.ts @@ -3293,10 +3293,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3313,6 +3309,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4511,32 +4511,32 @@ Cột 'Trạng thái' cho biết liệu tài liệu có thể được khôi ph Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6062,6 +6062,18 @@ Bạn có muốn chỉ định thư mục khác không? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Tiếng Hy Lạp + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7026,6 +7038,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9833,6 +9877,10 @@ Do you still want to proceed? Special Ops Tính năng đặc biệt + + Axonometric + Phép chiếu có trục đo + testClass diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 5542ca3dac..464c4536df 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 5b5f8bc62d..669518036a 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -3281,10 +3281,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3301,6 +3297,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4498,32 +4498,32 @@ The 'Status' column shows whether the document could be recovered. 单击此按钮之前，请选择1，2或3个点。点可以位于顶点，面或边上。如果在面或边缘上，所使用的点将是沿着面或边缘的鼠标位置处的点。如果选择1点，则将其用作旋转中心。如果选择了2个点，则它们之间的中点将成为旋转中心，必要时将新建自定义轴。如果选择3个点，则第一个点成为旋转中心，并且位于与3个点定义的平面垂直的矢量上。报告视图中提供了一些距离和角度信息，这在对齐对象时非常有用。为方便，使用Shift+单击时，相应的距离或角度将复制到剪贴板。 - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - 欧拉角（xy'z''） + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6043,6 +6043,18 @@ Do you want to specify another directory? Vietnamese 越南语 + + Bulgarian + Bulgarian + + + Greek + 希腊语 + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7004,6 +7016,38 @@ Physical path: 物理路径： + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9811,6 +9855,10 @@ Do you still want to proceed? Special Ops 特殊设定 + + Axonometric + 轴测图 + testClass diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index 8413477c4b..1a2af100df 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 4c5e023f1a..39a3211e03 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -3281,10 +3281,6 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded - - Unloaded Workbenches - Unloaded Workbenches - Workbench Name Workbench Name @@ -3301,6 +3297,10 @@ You can also use the form: John Doe <john@doe.com> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Available Workbenches + Available Workbenches + Gui::Dialog::DlgSettingsLazyLoadedImp @@ -4499,32 +4499,32 @@ The 'Status' column shows whether the document could be recovered. Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. - Around y-axis: - Around y-axis: + Pitch (around y-axis): + Pitch (around y-axis): - Around z-axis: - Around z-axis: + Roll (around x-axis): + Roll (around x-axis): - Around x-axis: - Around x-axis: + Yaw (around z-axis): + Yaw (around z-axis): - Rotation around the x-axis - Rotation around the x-axis + Yaw (around z-axis) + Yaw (around z-axis) - Rotation around the y-axis - Rotation around the y-axis + Pitch (around y-axis) + Pitch (around y-axis) - Rotation around the z-axis - Rotation around the z-axis + Roll (around the x-axis) + Roll (around the x-axis) - Euler angles (xy'z'') - Euler angles (xy'z'') + Euler angles (zy'x'') + Euler angles (zy'x'') @@ -6042,6 +6042,18 @@ Do you want to specify another directory? Vietnamese Vietnamese + + Bulgarian + Bulgarian + + + Greek + Greek 希臘語 + + + Spanish, Argentina + Spanish, Argentina + Gui::TreeDockWidget @@ -7000,6 +7012,38 @@ Physical path: Physical path: + + Could not save document + Could not save document + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? + + + Document not saved + Document not saved + + + The document%1 could not be saved. Do you want to cancel closing it? + The document%1 could not be saved. Do you want to cancel closing it? + + + %1 Document(s) not saved + %1 Document(s) not saved + + + Some documents could not be saved. Do you want to cancel closing? + Some documents could not be saved. Do you want to cancel closing? + SelectionFilter @@ -9807,6 +9851,10 @@ Do you still want to proceed? Special Ops 特別行動 + + Axonometric + 軸測圖 + testClass diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts index 25724b8bca..e0f6ddd45b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_bg.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_bg.ts index 5464734408..2f157dd6cf 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_bg.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_bg.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Инсталационна папка @@ -97,97 +97,97 @@ Списъкът с работни среди бе обновен. - + Outdated GitPython detected, consider upgrading with pip. Засечен е остарял GitPython, обмислете да го надградите с помощта на pip. - + List of macros successfully retrieved. Успешно извлечен е списъкът с макроси. - + Retrieving description... Извлича се описание... - + Retrieving info from Извличане на данни от - + An update is available for this addon. Има обновяване за тази добавка. - + This addon is already installed. Добавката вече я има. - + Retrieving info from git Извличане на данни от git - + Retrieving info from wiki Извличане на данни от уики - + GitPython not found. Using standard download instead. Няма открит GitPython. Вместо това използвайте стандартно изтегляне. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Вашата версия на python не поддържа ZIP файлове. Продължаването невъзможно. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Работната среда бе обновена. Моля рестартирайте FreeCAD за прилагане на промените. - + Missing workbench Работната среда не е налична - + Missing python module Липсва модул на python - + Missing optional python module (doesn't prevent installing) Липсва допълнителен модул на python (не предотвратява инсталирането) - + Some errors were found that prevent to install this workbench Открити бяха грешки, които предотвратяват инсталирането на работната среда - + Please install the missing components first. Първо инсталирайте липсващите компоненти. - + Error: Unable to download Грешка: Не може да се изтегли - + Successfully installed Успешно инсталирано - + GitPython not installed! Cannot retrieve macros from git Не е инсталиран GitPython! Не може да извлечете данни за макроса от git @@ -207,72 +207,72 @@ Изисква се повторно пускане - + This macro is already installed. Макросът вече е инсталиран. - + A macro has been installed and is available under Macro -> Macros menu Макросът е инсталиран и наличен под менюто Макроси -> макрос - + This addon is marked as obsolete Добавката е отбелязана като остаряла - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Това обикновено означава, че тя вече не се поддържа, и някоя по-напреднала добавка в този списък предлага същата функционалност. - + Error: Unable to locate zip from Грешка: Не може да се намери zip от - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Получи се проблем при извличането на макроса от Git, вероятно изпълнимият файл Git.exe не е достъпен през променливата на средата PATH - + This addon is marked as Python 2 Only Тази добавка е отбелязана като съвместима само с Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Тази работна среда вероятно вече не се поддържа и инсталирането и в система с Python 3 вероятно ще доведе до грешки по време на стартиране или употреба. - + User requested updating a Python 2 workbench on a system running Python 3 - Потребителят пожела обновяване на Python 2 работна среда в система използваща Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Работната среда бе обновена. Моля рестартирайте FreeCAD за прилагане на промените. - + User requested installing a Python 2 workbench on a system running Python 3 - Потребителят пожела инсталиране на Python 2 работна среда в система използваща Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Изглежда има проблем при свързване с Wiki, свалянето на списъка с макроси от Wiki не е възможно в момента - + Raw markdown displayed Показан е суровия изходния код - + Python Markdown library is missing. Липсва библиотеката Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index 9ed77112c9..2af99c1011 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localització de la instal·lació @@ -97,97 +97,97 @@ Banc de treball actualitzat. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Manca el mòdul python - + Missing optional python module (doesn't prevent installing) Manca el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Si us plau, instal·leu primer els components que manquen. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython! No es poden recuperar les macros de git @@ -207,72 +207,72 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançat d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path S'ha produït un error amb la recuperació de macros de Git, possiblement l'executable de Git no estigui en la ruta - + This addon is marked as Python 2 Only Aquest complement està marcat només com a Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. És possible que aquest banc de treball ja no es mantingui i instal·lar-lo en un sistema Python 3 provocarà probablement errors en iniciar-se o en ús. - + User requested updating a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + User requested installing a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembla que és hi ha algun problema de connexió amb el Wiki, per tant no es pot recuperar la llista de macros de la Wiki en aquest moment - + Raw markdown displayed Mostrant Markdown sense processar - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index c16ad385a1..239228f9ed 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umístění instalace @@ -97,97 +97,97 @@ Seznam pracovních prostředí byl aktualizován. - + Outdated GitPython detected, consider upgrading with pip. Zjištěn zastaralý GitPython, zvažte upgrade pomocí pip. - + List of macros successfully retrieved. Seznam maker úspěšně načten. - + Retrieving description... Načítání popisu... - + Retrieving info from Načítání informací z - + An update is available for this addon. Pro tento doplněk je dostupná aktualizace. - + This addon is already installed. Toto rozšíření je již nainstalováno. - + Retrieving info from git Načítání informací z gitu - + Retrieving info from wiki Načítání informací z wiki - + GitPython not found. Using standard download instead. GitPython nenalezen. Použijte standardní způsob stažení. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaše verze pythonu pravděpodobně nepodporuje ZIP soubory. Nelze pokračovat. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Pracovní prostředí bylo úspěšně nainstalováno. Pro aplikaci změn prosím restartujte FreeCAD. - + Missing workbench Chybí pracovní prostředí - + Missing python module Chybějící modul python - + Missing optional python module (doesn't prevent installing) Chybí volitelný modul pythonu (nebrání instalaci) - + Some errors were found that prevent to install this workbench Byly nalezeny chyby, které brání instalaci tohoto pracovního prostředí - + Please install the missing components first. Nejprve prosím nainstalujte chybějící komponenty. - + Error: Unable to download Chyba: Nelze stáhnout - + Successfully installed Úspěšně nainstalováno - + GitPython not installed! Cannot retrieve macros from git GitPython není nainstalován! Nelze načíst makra z gitu @@ -207,72 +207,72 @@ Je vyžadován restart - + This macro is already installed. Toto makro je již nainstalováno. - + A macro has been installed and is available under Macro -> Macros menu Makro bylo nainstalováno a je k dispozici v menu Makro -> Makra - + This addon is marked as obsolete Tento doplněk je označen jako zastaralý - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obvykle znamená, že již není udržován a některé pokročilejší doplňky v tomto seznamu poskytují stejnou funkčnost. - + Error: Unable to locate zip from Chyba: Nelze najít zip z - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Něco se pokazilo s Git Macro Retrieval, možná není spustitelný Git v cestě - + This addon is marked as Python 2 Only Tento doplněk je označen pouze jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tento pracovní prostředí již nemusí být udržován a instalace do systému Python 3 bude mít pravděpodobně za následek chyby při startu nebo při používání. - + User requested updating a Python 2 workbench on a system running Python 3 - Uživatel požádal o aktualizaci pracovního prostředí Pythonu 2 do systému, který používá Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Pracovní prostředí bylo úspěšně aktualizováno. Pro aplikaci změn prosím restartujte FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uživatel požádal o instalaci pracovního prostředí Pythonu 2 do systému, který používá Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Zdá se, že je problém s připojením k Wiki, proto momentálně nelze získat seznam maker Wiki - + Raw markdown displayed Zobrazit čisté markdown - + Python Markdown library is missing. Chybí python knihovna Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 0d63b2feac..e54ff402f8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installationsort @@ -97,97 +97,97 @@ Die Liste der Arbeitsbereiche wurde aktualisiert. - + Outdated GitPython detected, consider upgrading with pip. Es wurde eine veraltete GitPython-Version erkannt, erwäge das Upgrade mit Pip. - + List of macros successfully retrieved. Die Makro-Liste wurde erfolgreich abgerufen. - + Retrieving description... Beschreibung wird abgerufen... - + Retrieving info from Informationen werden abgerufen von - + An update is available for this addon. Für dieses Addon ist ein Update verfügbar. - + This addon is already installed. Dieses Addon ist bereits installiert. - + Retrieving info from git Informationen werden von Git abgerufen - + Retrieving info from wiki Informationen werden aus den Wiki abgerufen - + GitPython not found. Using standard download instead. GitPython wurde nicht gefunden. Stattdessen wird der Standarddownload verwendet. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ihre Version von Python scheint ZIP-Dateien nicht zu unterstützen. Aktion kann nicht fortgesetzt werden. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich installiert. Bitte starten Sie FreeCAD neu, um die Änderungen anzuwenden. - + Missing workbench Fehlender Arbeitsbereich - + Missing python module Fehlendes Python-Modul - + Missing optional python module (doesn't prevent installing) Fehlendes optionales Python-Modul (verhindert nicht die Installation) - + Some errors were found that prevent to install this workbench Einige Fehler verhindern die Installation dieses Arbeitsbereiches - + Please install the missing components first. Bitte installieren Sie zuerst die fehlenden Komponenten. - + Error: Unable to download Fehler: Download nicht möglich - + Successfully installed Installation erfolgreich - + GitPython not installed! Cannot retrieve macros from git GitPython is nicht installiert! Makros können nicht von Git abgerufen werden @@ -207,72 +207,72 @@ Neustart erforderlich - + This macro is already installed. Dieses Makro ist bereits installiert. - + A macro has been installed and is available under Macro -> Macros menu Ein Makro wurde installiert und ist verfügbar unter Makro -> Makros-Menü - + This addon is marked as obsolete Dieses Addon ist als veraltet markiert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dies bedeutet normalerweise, dass es nicht mehr gewartet wird und ein fortschrittlicheres Addon in dieser Liste die gleiche Funktionalität bietet. - + Error: Unable to locate zip from Fehler: Zip-Datei kann nicht gefunden werden von - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ein Fehler ist bei der Git-Makro Abfrage aufgetreten, möglicherweise befindet sich die ausführbare Git-Datei nicht in dem Pfad - + This addon is marked as Python 2 Only Dieses Addon ist als nur für Python 2 gekennzeichnet - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Dieser Arbeitsbereich wird möglicherweise nicht mehr gewartet und die Installation auf einem Python-3-System wird höchstwahrscheinlich zu Fehlern beim Start oder während der Nutzung führen. - + User requested updating a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Aktualisierung eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich aktualisiert. Bitte starten Sie FreeCAD neu, um die Änderungen zu übernehmen. - + User requested installing a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Installation eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Anscheinend ist ein Problem beim Verbinden mit dem Wiki aufgetreten, daher kann die Wiki-Makroliste zu diesem Zeitpunkt nicht abgerufen werden - + Raw markdown displayed Unbearbeitetes Markdown angezeigt - + Python Markdown library is missing. Python Markdown Bibliothek fehlt. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index f69ac1c896..84d2327d55 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Ενημερώθηκε η λίστα πάγκων εργασίας. - + Outdated GitPython detected, consider upgrading with pip. Ανιχνεύθηκε ξεπερασμένη έκδοση GitPython, εξετάστε το ενδεχόμενο αναβάθμισης με το pip. - + List of macros successfully retrieved. Η λίστα μακροεντολών ανακτήθηκε επιτυχώς. - + Retrieving description... Ανάκτηση περιγραφής... - + Retrieving info from Ανάκτηση πληροφοριών από - + An update is available for this addon. Υπάρχει διαθέσιμη ενημέρωση για αυτό το πρόσθετο. - + This addon is already installed. Αυτό το πρόσθετο είναι ήδη εγκατεστημένο. - + Retrieving info from git Ανάκτηση πληροφοριών από το git - + Retrieving info from wiki Ανάκτηση πληροφοριών από το wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Η δικιά σας έκδοση της python δεν φαίνεται να υποστηρίζει αρχεία ZIP. Δεν είναι δυνατή η συνέχιση. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ο πάγκος εργασίας εγκαταστάθηκε επιτυχώς. Παρακαλώ επανεκκινήστε το FreeCAD για να εφαρμόσετε τις αλλαγές. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Βρέθηκαν κάποια σφάλματα που εμποδίζουν την εγκατάσταση αυτού του πάγκου εργασίας - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Σφάλμα: Δεν είναι δυνατή η λήψη - + Successfully installed Επιτυχής εγκατάσταση - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Απαιτείται επανεκκίνηση - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts index 02d39f45e0..6e81db67ad 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicación de la instalación @@ -97,97 +97,97 @@ Se actualizó la lista de Entornos de trabajo. - + Outdated GitPython detected, consider upgrading with pip. Se ha detectado GitPython obsoleto, considere actualizar con pip. - + List of macros successfully retrieved. La lista de macros fue recuperada con éxito. - + Retrieving description... Recuperando descripción... - + Retrieving info from Recuperando información de - + An update is available for this addon. Una actualización está disponible para este complemento. - + This addon is already installed. Este complemento ya está instalado. - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de wiki - + GitPython not found. Using standard download instead. GitPython no encontrado. Utilizando descarga estándar en su lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Su versión de python n'o parece ser compatible con archivos ZIP. No es posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Entorno de trabajo instalado correctamente. Reinicie FreeCAD para aplicar los cambios. - + Missing workbench Falta el Entorno de trabajo - + Missing python module Falta módulo python - + Missing optional python module (doesn't prevent installing) Falta módulo opcional de python (n'o impide la instalación) - + Some errors were found that prevent to install this workbench Se encontraron algunos errores que impiden instalar este Entorno de trabajo - + Please install the missing components first. Por favor, instale los componentes que faltan primero. - + Error: Unable to download Error: No se puede descargar - + Successfully installed Instalado correctamente - + GitPython not installed! Cannot retrieve macros from git ¡GitPython no instalado! No se pueden recuperar macros desde git @@ -207,72 +207,72 @@ Es necesario reiniciar - + This macro is already installed. Esta macro ya está instalada. - + A macro has been installed and is available under Macro -> Macros menu Una macro ha sido instalada y está disponible en el menú Macro -> Macros - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto generalmente significa que ya no está mantenido, y algún complemento más avanzado en esta lista proporciona la misma funcionalidad. - + Error: Unable to locate zip from Error: No se puede localizar zip desde - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo salió mal con la recuperación de Macro de Git, posiblemente el ejecutable de Git no está en la ruta - + This addon is marked as Python 2 Only Este complemento está marcado solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este Entorno de trabajo ya no se mantiene, instalarlo en un sistema con Python 3 probablemente provocará errores al ejecutarse o utilizarse. - + User requested updating a Python 2 workbench on a system running Python 3 - El usuario solicitó actualizar un Entorno de trabajo Python 2 en un sistema que ejecuta Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Entorno de Trabajo actualizado con éxito. Reinicie FreeCAD para aplicar los cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - El usuario solicitó instalar un Entorno de trabajo Python 2 en un sistema que ejecuta Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece ser un problema para conectarse a la Wiki, por lo tanto, no se puede recuperar la lista de macros de la Wiki en este momento - + Raw markdown displayed Markdown sin procesar mostrada - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index fe352d7a61..2721225306 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicación de la instalación @@ -97,97 +97,97 @@ Lista de entornos de trabajo actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considere actualizar con pip. - + List of macros successfully retrieved. La lista de macros fue recuperada con éxito. - + Retrieving description... Recuperando la descripción... - + Retrieving info from Recuperando información de - + An update is available for this addon. Una actualización está disponible para este complemento. - + This addon is already installed. Este complemento ya está instalado. - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de wiki - + GitPython not found. Using standard download instead. GitPython no encontrado. Utilizando descarga estándar en su lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Su versión de python no parece ser compatible con archivos ZIP. No es posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El entorno de trabajo se ha instalado correctamente. Reinicie FreeCAD para aplicar los cambios. - + Missing workbench Falta el entorno de trabajo - + Missing python module Falta módulo python - + Missing optional python module (doesn't prevent installing) Falta módulo opcional de python (no impide la instalación) - + Some errors were found that prevent to install this workbench Se han encontrado algunos errores que impiden instalar este entorno de trabajo - + Please install the missing components first. Por favor, instale los componentes que faltan primero. - + Error: Unable to download Error: No se puede descargar - + Successfully installed Se ha instalado correctamente - + GitPython not installed! Cannot retrieve macros from git ¡GitPython no instalado! No se pueden recuperar macros desde git @@ -207,72 +207,72 @@ Es necesario reiniciar - + This macro is already installed. Esta macro ya está instalada. - + A macro has been installed and is available under Macro -> Macros menu Una macro ha sido instalada y está disponible en el menú Macro -> Macros - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto generalmente significa que ya no está mantenido, y algún complemento más avanzado en esta lista proporciona la misma funcionalidad. - + Error: Unable to locate zip from Error: No se puede localizar zip desde - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo salió mal con la recuperación de instrucciones de Git, posiblemente el ejecutable de Git no está en la ruta - + This addon is marked as Python 2 Only Este complemento está marcado solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de trabajo ya no se mantiene, instalarlo en un sistema con Python 3 probablemente provocará errores al ejecutarse o utilizarse. - + User requested updating a Python 2 workbench on a system running Python 3 - El usuario solicita actualizar un banco de trabajo con Python 2 en un sistema que ejecuta Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Banco de trabajo actualizado con éxito. Reinicie FreeCAD para aplicar los cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - El usuario solicita instalar un banco de trabajo Python 2 en un sistema que ejecuta Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece ser un problema al conectarse a la Wiki, por lo tanto no puede recuperar la lista de macros del Wiki en este momento - + Raw markdown displayed Markdown sin procesar mostrado - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index b4d8758f42..9adb2cac4f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Instalatutako kokapena @@ -97,97 +97,97 @@ Lan-mahaien zerrenda eguneratu da. - + Outdated GitPython detected, consider upgrading with pip. GitPython zaharkitua detektatu da, eguneratu ezazu pip bidez. - + List of macros successfully retrieved. Makroen zerrenda ongi atzitu da. - + Retrieving description... Deskribapena atzitzen... - + Retrieving info from Informazioa berreskuratzen hemendik - + An update is available for this addon. Eguneraketa bat eskuragarri dago gehigarri honetarako. - + This addon is already installed. Gehigarri hau instalatuta dago. - + Retrieving info from git Informazioa atzitzen git biltegitik - + Retrieving info from wiki Informazioa atzitzen wikitik - + GitPython not found. Using standard download instead. GitPython ez da aurkitu. Deskarga estandarra erabiltzen. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Badirudi zure Python bertsioak ez duela ZIP fitxategirik onartzen. Ezin da jarraitu. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Lan-mahaia ongi instalatu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + Missing workbench Lan-mahaia falta da - + Missing python module Python modulua falta da - + Missing optional python module (doesn't prevent installing) Aukerako Python modulua falta da (ez du instalazioa eragozten) - + Some errors were found that prevent to install this workbench Lan-mahai hau instalatzea eragozten duten zenbait errore aurkitu dira - + Please install the missing components first. Instalatu falta diren osagaiak. - + Error: Unable to download Errorea: Ezin da deskargatu - + Successfully installed Ongi instalatu da - + GitPython not installed! Cannot retrieve macros from git GitPython ez dago instalatuta! Ezin dira makroak atzitu git biltegitik @@ -207,72 +207,72 @@ Berrabiaraztea beharrezkoa da - + This macro is already installed. Makro hau instalatuta dago. - + A macro has been installed and is available under Macro -> Macros menu Makro bat instalatu da eta 'Makroa -> Makroak' menuan erabilgarri dago - + This addon is marked as obsolete Gehigarri hau zaharkituta dago - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Horrek esan nahi du ez dela mantentzen eta zerrenda honetako gehigarri aurreratuagoren batek funtzionaltasun bera eskaintzen duela. - + Error: Unable to locate zip from Errorea: Ezin izan da ZIP fitxategia aurkitu - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Zerbait gaizki atera da Git makroak atzitzean, ziur aski Git exekutagarria ez dago bidean - + This addon is marked as Python 2 Only Gehigarri hau Python 2 bertsiorako soilik da - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Lan-mahai honek beharbada ez du jadanik mantenimendurik eta Python 3 duen sistema batean instalatzen bada erroreak sortu ditzake bai abioan bai erabiltzen ari denean. - + User requested updating a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat eguneratzea eskatu du Python 3 duen sistema batean - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Lan-mahaia ongi eguneratu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + User requested installing a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat instalatzea eskatu du Python 3 duen sistema batean - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Badirudi arazo bat dagoela wikiarekin konektatzean, ezin da atzitu wikiko makroen zerrenda momentu honetan - + Raw markdown displayed Markdown gordina bistaratzen ari da. - + Python Markdown library is missing. Python Markdown liburutegia falta da. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index 4e4f2c0b9a..dcae98e77a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Asennettu sijainti @@ -97,97 +97,97 @@ Työpöytien luettelo on päivitetty. - + Outdated GitPython detected, consider upgrading with pip. Vanhentunut GitPython havaittu, harkitse päivitystä pip: n kanssa. - + List of macros successfully retrieved. Luettelo makroista noudettu. - + Retrieving description... Haetaan kuvausta... - + Retrieving info from Haetaan tietoja - + An update is available for this addon. Päivitys on saatavilla tälle lisäosalle. - + This addon is already installed. Tämä lisäosa on jo asennettu. - + Retrieving info from git Haetaan tietoja git: stä - + Retrieving info from wiki Haetaan tietoja wikistä - + GitPython not found. Using standard download instead. GitPythonia ei löytynyt. Käytetään sen sijaan standardilatausta. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sinun versiota pythonista ei ' löydy tukeakseen ZIP tiedostoja. Ei voida edetä. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + Missing workbench Työpöytä puuttuu - + Missing python module Python moduuli puuttuu - + Missing optional python module (doesn't prevent installing) Valinnainen python-moduuli puuttuu (se ' estää asennuksen) - + Some errors were found that prevent to install this workbench Joitakin virheitä havaittiin, mikä estää tämän työpöydän asentamisen - + Please install the missing components first. Asenna ensin puuttuvat komponentit. - + Error: Unable to download Virhe: Lataaminen epäonnistui - + Successfully installed Asennettu onnistuneesti - + GitPython not installed! Cannot retrieve macros from git GitPythonia ei ole asennettu! Makroja ei voi noutaa git: stä @@ -207,72 +207,72 @@ Uudelleenkäynnistys vaaditaan - + This macro is already installed. Tämä makro on jo asennettu. - + A macro has been installed and is available under Macro -> Macros menu Makro on asennettu ja se on saatavilla makro -> Makro -valikosta - + This addon is marked as obsolete Tämä lisäosa on merkitty vanhentuneeksi - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Tämä tarkoittaa yleensä sitä, että sitä ei enää ylläpidetä ja että tässä luettelossa on edistyneempiä lisäosia, mitkä tekevät saman toiminnallisuuden. - + Error: Unable to locate zip from Virhe: Zip -tiedostoa ei voitu paikantaa - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Jotain meni pieleen Git Makron noutamisessa, ehkä Git-ohjelma ei ole polulla - + This addon is marked as Python 2 Only Tämä lisäosa on merkitty vain Python 2: lle - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tätä työpöytää ei voida enää ylläpitää ja sen asentaminen Python 3 -järjestelmään johtaa todennäköisemmin virheisiin käynnistyksessä tai käytön aikana. - + User requested updating a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän päivittämistä Python 3 -järjestelmään - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + User requested installing a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän asentamista Python 3 -järjestelmässä - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Näyttää siltä, että kyseessä on Wikiin yhdistämiseen liittyvä ongelma, joten Wiki makro -listaa ei voida hakea tällä hetkellä - + Raw markdown displayed Raw Markdown (muokkaamaton) näytetään - + Python Markdown library is missing. Python Markdown kirjasto puuttuu. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts index 3aa1393246..23890549cd 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index 67e0d5754a..18c1eaf6db 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Emplacement installé @@ -97,97 +97,97 @@ La liste des ateliers a été mise à jour. - + Outdated GitPython detected, consider upgrading with pip. La version de GitPython est obsolète, envisagez de mettre à jour avec pip. - + List of macros successfully retrieved. Liste des macros récupérée avec succès. - + Retrieving description... Récupération de la description... - + Retrieving info from Récupération des informations de - + An update is available for this addon. Une mise à jour est disponible pour ce greffon. - + This addon is already installed. Ce greffon est déjà installé. - + Retrieving info from git Récupération des informations depuis git - + Retrieving info from wiki Récupération des informations depuis le wiki - + GitPython not found. Using standard download instead. GitPython est introuvable. Utilisation du téléchargement standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Votre version de Python semble ne pas supporter les fichiers ZIP. Impossible de continuer. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Atelier installé avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + Missing workbench Atelier manquant - + Missing python module Module Python manquant - + Missing optional python module (doesn't prevent installing) Un module Python optionnel est manquant (mais n'empêche pas l'installation) - + Some errors were found that prevent to install this workbench Des erreurs sont survenues et empêchent l'installation de cet atelier - + Please install the missing components first. Veuillez d'abord installer les composants manquants. - + Error: Unable to download Erreur : impossible de télécharger - + Successfully installed Installation réussie - + GitPython not installed! Cannot retrieve macros from git GitPython n'est pas installé. Impossible de récupérer les macros depuis git @@ -207,72 +207,72 @@ Redémarrage requis - + This macro is already installed. Cette macro est déjà installée. - + A macro has been installed and is available under Macro -> Macros menu Une macro a été installée et est disponible dans le menu Macro -> Macros - + This addon is marked as obsolete Ce greffon est marqué comme obsolète - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Cela signifie généralement qu'il n'est plus maintenu, et que d'autres greffons plus perfectionnés proposant les mêmes fonctionnalités sont disponibles. - + Error: Unable to locate zip from Erreur: Impossible de localiser le zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Une erreur s'est produite lors de la Récupération de Macro Git, peut-être que l'exécutable Git n'est pas dans le chemin d'accès - + This addon is marked as Python 2 Only Cet addon est indiqué pour Python 2 uniquement - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Cet atelier peut ne plus être maintenu et l'installer sur un système Python 3 entraînera très probablement des erreurs au démarrage ou en cours d'utilisation. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé la mise à jour d'un atelier Python 2 sur un système Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Atelier mis à jour avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé l'installation d'un atelier Python 2 sur un système exécutant Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Il semble y avoir un problème de connexion au Wiki, la liste des macros du Wiki ne peut donc pas être récupérée pour le moment - + Raw markdown displayed Affichage du Markdown brut - + Python Markdown library is missing. La bibliothèque Python Markdown est manquante. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index c2add8662a..605eeef93a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localización da instalación @@ -97,97 +97,97 @@ A lista de bancos de traballo foi actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considera actualizar con pip. - + List of macros successfully retrieved. Lista de macros recuperada con éxito. - + Retrieving description... Recuperando descrición... - + Retrieving info from Recuperando información dende - + An update is available for this addon. Unha actualización está dispoñible para este engadido. - + This addon is already installed. Este engadido xa está instalado. - + Retrieving info from git Recuperando información dende git - + Retrieving info from wiki Recuperando información dende wiki - + GitPython not found. Using standard download instead. GitPython non atopado. Utilizando descarga estándard no seu lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A túa versión de python non parece ser compatible con ficheiros ZIP. Non é posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. O banco de traballo instalado correctamente. Fai o favor de reiniciar FreeCAD para aplicar os trocos. - + Missing workbench Perdido banco de traballo - + Missing python module Perdido módulo python - + Missing optional python module (doesn't prevent installing) Módulo python opcional perdido (non impide a instalación) - + Some errors were found that prevent to install this workbench Algúns erros atopados que impiden instalar este banco de traballo - + Please install the missing components first. Fai o favor de instalar os compoñentes que falta primeiro. - + Error: Unable to download Erro: A descarga non vai - + Successfully installed Instalado con éxito - + GitPython not installed! Cannot retrieve macros from git GitPyton non instalado! Non se pode recuperar macros dende o git @@ -207,72 +207,72 @@ Require reinicio - + This macro is already installed. Esta macro xa está instalada. - + A macro has been installed and is available under Macro -> Macros menu Unha macro foi instalada e está dispoñible baixo o menú Macros Macro -> - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto xeralmente significa que xa non é mantido, e algún complemento máis avanzado nesta lista provén a mesma funcionalidade. - + Error: Unable to locate zip from Erro: non se puido localizar o zip dende - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo saíu mal coa recuperación de macros de Git, posiblemente o executable de Git non está na ruta - + This addon is marked as Python 2 Only Este complemento está marcado soamente como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de traballo xa non se mantén e instalalo nun sistema con Python 3 probablemente provoque erros ó iniciarse ou ó usarse. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuario solicitou actualizar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. O banco de traballo actualizouse correctamente. Reinicie FreeCAD para aplicar os cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuario solicitou instalar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece que hai un problema ó conectarse á Wiki, polo tanto non se pode recuperar a lista de macros da Wiki neste momento - + Raw markdown displayed Mostrando Markdown sen procesar - + Python Markdown library is missing. Falta a biblioteca Markdown de Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index 172ac29b9e..43c0475589 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mjesto instaliranja @@ -97,97 +97,97 @@ Popis radnih površina je ažuriran. - + Outdated GitPython detected, consider upgrading with pip. Otkriven je zastarjeli GitPython, razmislite o nadogradnji s pip. - + List of macros successfully retrieved. Popis makronaredbi uspješno je dohvaćen. - + Retrieving description... Dohvaćanje opisa... - + Retrieving info from Dohvaćanje informacije od - + An update is available for this addon. Dostupno ažuriranje za ovaj dodatak. - + This addon is already installed. Ovaj dodatak je već instaliran. - + Retrieving info from git Dohvaćanje informacije od git - + Retrieving info from wiki Dohvaćanje informacije od wiki-a - + GitPython not found. Using standard download instead. GitPython nije pronađen. Upotreba standardnog preuzimanja. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaša verzija python-a ne podržava ZIP datoteke. Nije moguće nastaviti. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Radna površina je uspješno instalirana. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + Missing workbench Nedostaje radna površina - + Missing python module Nedostaje python modul - + Missing optional python module (doesn't prevent installing) Nedostaje neobvezan python modul (neće se spriječiti instalacija) - + Some errors were found that prevent to install this workbench Pronađene su neke pogreške koje sprečavaju instalaciju ove radne površine - + Please install the missing components first. Prvo instalirajte nedostajuće dijelove. - + Error: Unable to download Greška: Ne mogu preuzeti - + Successfully installed Uspješno instaliran - + GitPython not installed! Cannot retrieve macros from git GitPython se nije instalirao! Ne mogu se dohvatiti makronaredbe iz git-a @@ -207,78 +207,78 @@ Potrebno je ponovo pokretanje - + This macro is already installed. Ova makronaredba je već instalirana. - + A macro has been installed and is available under Macro -> Macros menu Makronaredba je instalirana i dostupna je pod Makro -> Makros-Izborniku - + This addon is marked as obsolete Ovaj dodatak je označen kao zastario - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obično znači da se više ne održava, a neki napredniji dodatak na ovom popisu pruža istu funkciju. - + Error: Unable to locate zip from Greška: Nije moguće locirati zip od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Nešto je pošlo po zlu s dohvaćanjem Git Macro-a, možda Git izvršni program nije u poveznici - + This addon is marked as Python 2 Only Taj je dodatak označen samo za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Ova radna ploča se više ne može održavati i instaliranje na Python 3 sustav vjerojatno će rezultirati pogreškama pri pokretanju ili tijekom upotrebe. - + User requested updating a Python 2 workbench on a system running Python 3 - Korisnik je zatražio ažuriranje radne površine Python 2 na sustavu koji pokreće Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench je uspješno ažuriran. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + User requested installing a Python 2 workbench on a system running Python 3 - Korisnik je zatražio instaliranje radne stanice Python 2 na sustav koji radi s Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Čini se da je problem povezivanje s Wiki-em, stoga trenutačno ne može dohvatiti popis makronaredbi Wiki-a - + Raw markdown displayed Prikazan čisti markdown kod - + Python Markdown library is missing. Nedostaje Python Markdown biblioteka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index bdbbe6deb3..a4f71429a9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Telepített hely @@ -97,97 +97,97 @@ A munkafelületek listája frissítve. - + Outdated GitPython detected, consider upgrading with pip. Elavult GitPython észlelve, fontolja meg a frissítés a pip-el. - + List of macros successfully retrieved. A sikeresen beolvasott makrók listája. - + Retrieving description... Leírások lekérdezése... - + Retrieving info from Információ beolvasása ettől - + An update is available for this addon. Ehhez a kiegészítőhöz egy frissítés érhető el. - + This addon is already installed. Ez a kiegészítő már telepítve van. - + Retrieving info from git Információ beolvasása git-ből - + Retrieving info from wiki Információ beolvasása wiki-ből - + GitPython not found. Using standard download instead. GitPython nem található. Szokásos letöltési hely használata. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A Python verziója úgy tűnik, nem támogatja a zip fájlokat. Nem folytatható. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Munkafelület sikeresen telepítve. A változtatások alkalmazásához indítsa újra a FreeCAD programot. - + Missing workbench Hiányzó munkafelület - + Missing python module Hiányzó python modul - + Missing optional python module (doesn't prevent installing) Hiányzó kiegészítő python modul (nem állítja meg a telepítése) - + Some errors were found that prevent to install this workbench Néhány hibát talált, amely megakadályozza, hogy telepítse ezt a munkafelületet - + Please install the missing components first. Kérem először telepítse a hiányzó összetevőket. - + Error: Unable to download Hiba: Nem lehet letölteni - + Successfully installed Sikeresen telepítve - + GitPython not installed! Cannot retrieve macros from git GitPython nincs telepítve! Nem olvashatók be a makrók a git-ből @@ -207,72 +207,72 @@ Újraindítás szükséges - + This macro is already installed. Ez a makró már telepítve van. - + A macro has been installed and is available under Macro -> Macros menu A makró telepítve van, és elérhető a Makró -> Makrók menüben - + This addon is marked as obsolete Ez a bővítmény elavultként jelölt - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Ez általában azt jelenti, hogy már nem tartják karban, és a lista néhány fejlettebb bővítménye ugyanazokat a funkciókat nyújtja. - + Error: Unable to locate zip from Hiba: Nem található a zip formátum - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Valami elromlott a Git makró visszakeresésnél, esetleg a futtatható Git nincs az elérési úton - + This addon is marked as Python 2 Only Ez a bővítmény csak Python 2-ként van megjelölve - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Előfordulhat, hogy ez a munkafelület már nem karbantartható, és a Python 3 rendszerre való telepítése több mint valószínű, hogy hibákat fog eredményezni indításkor vagy használat közben. - + User requested updating a Python 2 workbench on a system running Python 3 - A felhasználó egy Python 2 munkaterület frissítését kérte egy Python 3-at futtató rendszeren - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. A munkaterület frissítése sikeresen megtörtént. A módosítások alkalmazásához indítsa újra a FreeCAD programot. - + User requested installing a Python 2 workbench on a system running Python 3 - A felhasználó python 2 munkafelület telepítését kérte egy Python 3-at futtató rendszeren - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Úgy tűnik, hogy a wikihez való kapcsolódási probléma, ezért jelenleg nem lehet beolvasni a Wiki makrólistát - + Raw markdown displayed Nyers leíró megjelenítése - + Python Markdown library is missing. Python leíró könyvtár hiányzik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index 5e58a84fa5..8d2f5b476e 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Lokasi pemasangan @@ -97,97 +97,97 @@ Daftar meja kerja sudah diperbarui. - + Outdated GitPython detected, consider upgrading with pip. GitPython yang kedaluwarsa terdeteksi, pertimbangkan untuk meningkatkan dengan pip. - + List of macros successfully retrieved. Daftar makro berhasil diambil. - + Retrieving description... Mengambil deskripsi... - + Retrieving info from Mengambil info dari - + An update is available for this addon. Pembaruan tersedia untuk addon ini. - + This addon is already installed. Addon ini sudah diinstal. - + Retrieving info from git Mengambil info dari git - + Retrieving info from wiki Mengambil info dari wiki - + GitPython not found. Using standard download instead. GitPython tidak ditemukan. Sebaliknya, gunakan unduhan standar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versi python Anda tampaknya tidak mendukung file ZIP. Tidak dapat melanjutkan. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Meja kerja berhasil diinstal. Silakan mulai kembali FreeCAD untuk menerapkan perubahan. - + Missing workbench Meja kerja tidak ada - + Missing python module Modul python tidak ada - + Missing optional python module (doesn't prevent installing) Modul python opsional tidak ada (tidak mencegah penginstalan) - + Some errors were found that prevent to install this workbench Beberapa kesalahan ditemukan yang mencegah untuk menginstal meja kerja ini - + Please install the missing components first. Silakan instal komponen yang hilang terlebih dahulu. - + Error: Unable to download Kesalahan: Tidak dapat mengunduh - + Successfully installed Berhasil diinstal - + GitPython not installed! Cannot retrieve macros from git GitPython tidak diinstal! Tidak dapat mengambil makro dari git @@ -207,72 +207,72 @@ Mulai ulang diperlukan - + This macro is already installed. Makro ini sudah diinstal. - + A macro has been installed and is available under Macro -> Macros menu Sebuah makro sudah diinstal dan tersedia di bawah menu Makro -> Makro - + This addon is marked as obsolete Addon ini ditandai sebagai usang - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Addon ini biasanya tidak lagi dipertahankan dan beberapa addon lebih canggih di daftar ini menyediakan fungsionalitas yang sama. - + Error: Unable to locate zip from Kesalahan: Tidak dapat menemukan zip dari - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Meja kerja ini tidak lagi diurus dan memasangnya pada sistem Python 3 mungkin akan lebih sering menyebabkan galat saat memulai atau saat menggunakan. - + User requested updating a Python 2 workbench on a system running Python 3 - Pengguna minta memperbaharui meja kerja Python 2 di sistem yang menjalankan Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Meja kerja berhasil diperbaharui. Tolong mulai ulang FreeCAD untuk menerapkan perubahan. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index d447f79d9e..34dcc4d537 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Percorso di installazione @@ -97,97 +97,97 @@ Elenco degli ambienti di lavoro aggiornato. - + Outdated GitPython detected, consider upgrading with pip. Rilevato GitPython obsoleto, considerare di aggiornarlo con pip. - + List of macros successfully retrieved. Lista delle macro recuperata con successo. - + Retrieving description... Recupero descrizione... - + Retrieving info from Recupero informazioni da - + An update is available for this addon. Per questo addon è disponibile un aggiornamento. - + This addon is already installed. Questo addon è già installato. - + Retrieving info from git Recupero informazioni da git - + Retrieving info from wiki Recupero informazioni dal wiki - + GitPython not found. Using standard download instead. GitPython non trovato. In sostituzione, usare il download standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sembra che la versione di python non supporti i file ZIP. Impossibile procedere. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambiente di lavoro installato correttamente. Riavviare FreeCAD per applicare le modifiche. - + Missing workbench Ambiente di lavoro mancante - + Missing python module Modulo python mancante - + Missing optional python module (doesn't prevent installing) Modulo Python opzionale mancante (ma non impedisce l'installazione) - + Some errors were found that prevent to install this workbench Sono stati trovati alcuni errori che impediscono di installare questo ambiente di lavoro - + Please install the missing components first. Si prega di installare prima i componenti mancanti. - + Error: Unable to download Errore: download impossibile - + Successfully installed Installazione riuscita - + GitPython not installed! Cannot retrieve macros from git GitPython non installato! Impossibile recuperare la macro da git @@ -207,72 +207,72 @@ Riavvio richiesto - + This macro is already installed. Questa macro è già installata. - + A macro has been installed and is available under Macro -> Macros menu Una macro è stata installata ed è disponibile sotto Macro -> menu Macros - + This addon is marked as obsolete Questo addon è contrassegnato come obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Questo di solito significa che non è più mantenuto e alcuni addon in questa lista forniscono la stessa funzionalità. - + Error: Unable to locate zip from Errore: Impossibile individuare zip da - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Qualcosa è andato storto con il recupero della macro da Git, forse l'eseguibile Git non è nel percorso - + This addon is marked as Python 2 Only Questo componente aggiuntivo è contrassegnato come solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Questo ambiente potrebbe non essere più mantenuto e installarlo su un sistema Python 3 causerà probabilmente errori all'avvio o durante l'uso. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'aggiornamento di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambiente di lavoro aggiornato correttamente. Riavviare FreeCAD per applicare le modifiche. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'installazione di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembra esserci un problema di connessione al Wiki, quindi in questo momento non è possibile recuperare l'elenco delle macro - + Raw markdown displayed Visualizza il sorgente Markdown - + Python Markdown library is missing. Manca la libreria Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index cacd26a989..c221ddb432 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location インストール場所 @@ -97,97 +97,97 @@ ワークベンチの一覧を更新しました。 - + Outdated GitPython detected, consider upgrading with pip. 古い GitPython が見つかりました。pip によるアップグレードを検討してください。 - + List of macros successfully retrieved. マクロの一覧を取り込むことに成功しました。 - + Retrieving description... 説明の取り込み中 - + Retrieving info from 情報を取り込み中 - + An update is available for this addon. このアドオンでアップデートが利用可能です。 - + This addon is already installed. このアドオンは既にインストールされています。 - + Retrieving info from git Gitからの情報を取り込み中 - + Retrieving info from wiki Wikiからの情報を取得しています - + GitPython not found. Using standard download instead. GitPythonが見つかりません。代わりに標準のダウンロードを使用しています。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 利用しているPythonのバージョンではZIPファイルをサポートしていないようです。ゆえに続行できません。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. ワークベンチのインストールが成功しました。 FreeCADを再起動して変更を有効にしてください。 - + Missing workbench ワークベンチが見当たりません - + Missing python module Pythonが見当たりません - + Missing optional python module (doesn't prevent installing) オプションのPythonモジュールが見つかりません(インストールは停止されません) - + Some errors were found that prevent to install this workbench エラーが発生したためこのワークベンチをインストールすることができません - + Please install the missing components first. 先ずは、見当たらないコンポーネントをインストールしてください。 - + Error: Unable to download エラー: ダウンロードできませんでした - + Successfully installed インストールが完了しました - + GitPython not installed! Cannot retrieve macros from git GitPythonがインストールされていませんでした！よってマクロをgitより取り戻すことができません @@ -207,72 +207,72 @@ 再起動が必要です - + This macro is already installed. このマクロは既にインストールされています。 - + A macro has been installed and is available under Macro -> Macros menu マクロがインストールされました。メニューのマクロ -> マクロから利用できます。 - + This addon is marked as obsolete このアドオンは非推奨に設定されています - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 通常はすでにメンテナンスがされていないことを意味します。このリストにあるさらに高度なアドオンが同じ機能を提供している場合があります。 - + Error: Unable to locate zip from エラー: ZIP ファイルを以下から配置できません。 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git マクロの取得に問題が発生しました。おそらく Git 実行ファイルがパス中にありません。 - + This addon is marked as Python 2 Only このアドオンは Python 2 専用として記されています - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. このワークベンチは保守されておらず、Python 3 システムにインストールすると起動時や使用中にエラーが発生する可能性が高くなります。 - + User requested updating a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチの更新を要求しました - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. ワークベンチの更新が成功しました。 FreeCADを再起動して変更を有効にしてください。 - + User requested installing a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチのインストールを要求しました - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wikiへの接続で問題が発生したため、現時点ではWikiのマクロリストを取得できません。 - + Raw markdown displayed 未加工のマークダウンを表示 - + Python Markdown library is missing. Python Markdown ライブラリがありません。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts index 97a072a586..a3151bb126 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Būtina paleisti iš naujo - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index c96ae4e174..4d176dbb83 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Geïnstalleerde locatie @@ -97,97 +97,97 @@ Werkbankenlijst is bijgewerkt. - + Outdated GitPython detected, consider upgrading with pip. Verouderde GitPython gevonden, overweeg een upgrade met pip. - + List of macros successfully retrieved. Lijst van macro's succesvol opgehaald. - + Retrieving description... Omschrijving ophalen... - + Retrieving info from Informatie ophalen vanaf - + An update is available for this addon. Er is een update beschikbaar voor deze addon. - + This addon is already installed. Deze addon is al geïnstalleerd. - + Retrieving info from git Informatie ophalen van git - + Retrieving info from wiki Informatie ophalen van wiki - + GitPython not found. Using standard download instead. GitPython niet gevonden. Standaard download wordt nu gebruikt. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Je versie van Python lijkt geen ZIP-bestanden te ondersteunen. Verder gaan niet mogelijk. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Werkbank succesvol geïnstalleerd. Herstart FreeCAD om de wijzigingen toe te passen. - + Missing workbench Werkbank ontbreekt - + Missing python module Ontbrekende python module - + Missing optional python module (doesn't prevent installing) Ontbrekende optionele python module (voorkomt niet het installeren) - + Some errors were found that prevent to install this workbench Er zijn enkele fouten gevonden die voorkomen dat deze werkbank wordt geïnstalleerd - + Please install the missing components first. Installeer eerst de ontbrekende componenten. - + Error: Unable to download Fout: Kan niet downloaden - + Successfully installed Succesvol geïnstalleerd - + GitPython not installed! Cannot retrieve macros from git GitPython niet geïnstalleerd! Macro's kunnen niet worden opgehaald van git @@ -207,72 +207,72 @@ Opnieuw opstarten vereist - + This macro is already installed. Deze macro is al geïnstalleerd. - + A macro has been installed and is available under Macro -> Macros menu Een macro is geïnstalleerd en is beschikbaar onder Macro -> Macro' s menu - + This addon is marked as obsolete Deze uitbreiding is gemarkeerd als verouderd - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dit betekent gewoonlijk dat het niet meer onderhouden wordt, en een geavanceerdere uitbreidingen in deze lijst biedt dezelfde functionaliteit. - + Error: Unable to locate zip from Fout: Kan zip niet vinden vanuit - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Er is iets misgegaan met het ophalen van de Git Macro. Mogelijk bevindt het uitvoerbare Git-bestand zich niet in het pad - + This addon is marked as Python 2 Only Deze toevoeging is alleen geschikt voor Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Deze werkbank wordt wellicht niet langer onderhouden en de installatie ervan op een Python 3-systeem zal hoogstwaarschijnlijk leiden tot fouten bij het opstarten of tijdens het gebruik. - + User requested updating a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank bij te werken die alleen geschikt is voor Python 3 - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Werkbank succesvol bijgewerkt. Herstart FreeCAD om de wijzigingen toe te passen. - + User requested installing a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank te installeren op een systeem dat Python 3 draait - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Er lijkt een probleem te zijn met de verbinding met de Wiki, daarom kan de Wiki-macrolijst op dit moment niet worden opgehaald - + Raw markdown displayed Ongeformateerde tekst weergegeven - + Python Markdown library is missing. Python Markdown bibliotheek mist. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 686f6a474e..6af1e8a1fc 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Miejsce instalacji @@ -97,97 +97,97 @@ Lista Środowisk pracy została zaktualizowana. - + Outdated GitPython detected, consider upgrading with pip. Wykryto przestarzały GitPython, rozważ aktualizację za pomocą programu pip. - + List of macros successfully retrieved. Pomyślnie pobrano listę makrodefinicji. - + Retrieving description... Pobieranie opisu... - + Retrieving info from Pobieranie informacji z - + An update is available for this addon. Aktualizacja jest dostępna dla tego dodatku. - + This addon is already installed. Ten dodatek jest już zainstalowany. - + Retrieving info from git Pobieranie informacji z git - + Retrieving info from wiki Pobieranie informacji z Wiki - + GitPython not found. Using standard download instead. Nie znaleziono GitPython. Zamiast tego użyto standardowego pobierania. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Twoja wersja Pythona nie' obsługuje plików ZIP. Nie można kontynuować. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Środowisko pracy zainstalowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + Missing workbench Nieistniejące Środowisko pracy - + Missing python module Nieistniejący moduł Pyton - + Missing optional python module (doesn't prevent installing) Brakuje opcjonalnego modułu Python (nie przeszkadza w instalacji) - + Some errors were found that prevent to install this workbench Znaleziono pewne błędy, które uniemożliwiają zainstalowanie tego środowiska - + Please install the missing components first. Proszę najpierw zainstalować brakujące komponenty. - + Error: Unable to download Błąd: Nie można pobrać - + Successfully installed Zainstalowano pomyślnie - + GitPython not installed! Cannot retrieve macros from git GitPython nie jest zainstalowany! Nie można pobrać makrodefinicji z git @@ -207,72 +207,72 @@ Wymagany restart - + This macro is already installed. Moduł jest już zainstalowany. - + A macro has been installed and is available under Macro -> Macros menu Makro zostało zainstalowane i jest dostępne w menu Macrodefinicji -> Menu makrodefinicji - + This addon is marked as obsolete Ten dodatek jest oznaczony jako przestarzały - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Oznacza to, że zazwyczaj nie jest on już utrzymywany, a niektóre bardziej zaawansowane dodatki z tej listy zapewniają tę samą funkcjonalność. - + Error: Unable to locate zip from Błąd: nie można znaleźć pliku Zip z - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Coś poszło nie tak z pobieraniem makr Git, prawdopodobnie plik wykonywalny Git nie występuje w podanej lokalizacjii - + This addon is marked as Python 2 Only Ten dodatek jest oznaczony tylko jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Te środowisko pracy nie może być dłużej utrzymywane, a zainstalowanie go w systemie Python 3 z dużym prawdopodobieństwem doprowadzi do błędów podczas uruchamiania lub podczas użytkowania. - + User requested updating a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zaktualizowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Środowisko pracy zaktualizowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + User requested installing a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zainstalowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wygląda na to, że występuje problem z połączeniem się z Wiki, dlatego nie można obecnie pobrać listy makrodefinicji dostępnej na Wiki - + Raw markdown displayed Wyświetlono surowy format markdown - + Python Markdown library is missing. Brakuje biblioteki Markdown środowiska Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index ff94554895..035e422913 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localização instalada @@ -97,97 +97,97 @@ Lista de workbenches atualizada. - + Outdated GitPython detected, consider upgrading with pip. GitPython desatualizado detectado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros obtida com sucesso. - + Retrieving description... Recuperando descrição... - + Retrieving info from Recuperando informações de - + An update is available for this addon. Uma atualização para esta extensão está disponível. - + This addon is already installed. Esta extensão já está instalada. - + Retrieving info from git Recuperando informações do git - + Retrieving info from wiki Recuperando informações da wiki - + GitPython not found. Using standard download instead. GitPython não encontrado. Usando o download padrão em vez disso. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sua versão do python parece não suportar arquivos ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada. Reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho não localizada - + Missing python module Modulo Python não localizado - + Missing optional python module (doesn't prevent installing) Faltando módulo python opcional (não impede a instalação) - + Some errors were found that prevent to install this workbench Foram encontrados alguns erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, primeiro instale os componentes faltantes. - + Error: Unable to download Erro: Não foi possível baixar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não instalado! Não é possível recuperar macros do git @@ -207,72 +207,72 @@ Reinicialização necessária - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macros - + This addon is marked as obsolete Essa extensão está marcada como obsoleta - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isso geralmente significa que ela não é mais mantida, e outra extensão mais avançada nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo deu errado com o Git Macro Retrieval, possivelmente o executável Git não está no caminho - + This addon is marked as Python 2 Only Esta extensão é marcada como apenas para Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada não pode mais ser mantida e instalá-la em um sistema Python 3 irá mais do que provavelmente resultar em erros na inicialização ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuário solicitou a atualização de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada atualizada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuário solicitou a instalação de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema conectando ao Wiki, portanto não foi possível recuperar a lista de macros Wiki neste momento - + Raw markdown displayed Marcação bruta exibida - + Python Markdown library is missing. Biblioteca Python Markdown está faltando. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index b0a5232c77..6686770789 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Caminho de instalação @@ -97,97 +97,97 @@ A lista de Bancadas de Trabalho foi atualizada. - + Outdated GitPython detected, consider upgrading with pip. Detetado GitPython desactualizado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros atualizada com sucesso. - + Retrieving description... Obtendo descrição... - + Retrieving info from Obtendo informações de - + An update is available for this addon. Uma atualização está disponível para esse extra. - + This addon is already installed. Este extra já está instalado. - + Retrieving info from git Obtendo informações do git - + Retrieving info from wiki Obtendo informações da wiki - + GitPython not found. Using standard download instead. GitPython não foi encontrado. Em vez disso, será usado o descarregamento padrão. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A sua versão de python parece não suportar ficheiros ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho em falta - + Missing python module Módulo python em falta - + Missing optional python module (doesn't prevent installing) Módulo python opcional em falta (não impede instalação) - + Some errors were found that prevent to install this workbench Foram encontrados erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, instale os componentes em falta primeiro. - + Error: Unable to download Erro: Não foi possível descarregar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não está instalado! Não é possível descarregar macros do git @@ -207,72 +207,72 @@ Reinicio necessário - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macro -> Macros - + This addon is marked as obsolete Este extra está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isto geralmente significa que já não é mantido, e algum extra mais atualizado nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo correu mal com a descarga da Macro do Git, possivelmente o executável Git não está no caminho especificado - + This addon is marked as Python 2 Only Este complemento é marcado apenas como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada de trabalho não pode mais ser mantida e instalá-la em um sistema Python 3 irá provavelmente resultar em erros no arranque ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizador solicitou atualização de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada de trabalho atualizada com sucesso. Por favor reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizador solicitou instalação de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema com a ligação à Wiki, portanto neste momento não é possível recuperar a lista Wiki de macros - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Falta biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index 358ce68c7a..db4c28b0f2 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Locația unde s-a efectuat instalarea @@ -97,97 +97,97 @@ Lista atelierelor a fost actualizată. - + Outdated GitPython detected, consider upgrading with pip. GitPython vechi detectat, luați în considerare actualizarea cu pip. - + List of macros successfully retrieved. Lista macro-urilor recuperate cu succes. - + Retrieving description... Recuperez descrierea... - + Retrieving info from Preluarea informațiilor de la - + An update is available for this addon. O actualizare este disponibilă pentru acest addon. - + This addon is already installed. Acest addon este deja instalat. - + Retrieving info from git Preluare informații de la git - + Retrieving info from wiki Preluare informații de la wiki - + GitPython not found. Using standard download instead. GitPython nu a fost găsit. Se folosește descarcarea standard în schimb. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versiunea dumneavoastră de Pyton nu suportă fișierele de tip ZIP. Nu se poate continua. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + Missing workbench Lipsește ambientul de lucru - + Missing python module Lipsește modulul Python - + Missing optional python module (doesn't prevent installing) Modulul opțional Python lipsește (nu împiedică instalarea) - + Some errors were found that prevent to install this workbench Au fost găsite unele erori care împiedică instalarea ambientului de lucru - + Please install the missing components first. Vă rugăm instalați mai întâi componentele lipsă. - + Error: Unable to download Eroare: Imposibil de descărcat - + Successfully installed Instalat cu succes - + GitPython not installed! Cannot retrieve macros from git GitPython nu este instalat! Nu se pot recupera macro-urile din git @@ -207,72 +207,72 @@ Repornire necesară - + This macro is already installed. Acest macro este deja instalat. - + A macro has been installed and is available under Macro -> Macros menu Un macro a fost instalat și este disponibil sub meniul Macro -> Macros - + This addon is marked as obsolete Acest addon este marcat ca expirat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. De obicei acest lucru inseamnă că nu mai este menținut, iar unele addon-uri mai avansate oferă aceleași funcții. - + Error: Unable to locate zip from Eroare: Nu se poate localiza zip de la - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ceva nu a mers bine cu Git Macro Retrieval, probabil executabilul Git nu se află in adresă - + This addon is marked as Python 2 Only Acest supliment este marcat ca Python 2 doar - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Acest ambient de lucru nu mai poate fi întreținut și instalarea sa pe un sistem Python 3 va cauza mai mult decât probabil erori la pornire sau în timpul utilizării. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Pare că există o problemă in conectarea la Wiki, prin urmare momentan nu se poate prelua lista de macro Wiki - + Raw markdown displayed Marcaj brut afișat - + Python Markdown library is missing. Lipsește biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index 20a21e7919..965791bfca 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место установки @@ -97,97 +97,97 @@ Список рабочих окружений обновлен. - + Outdated GitPython detected, consider upgrading with pip. Обнаружен устаревший GitPython, рассмотрите обновление с помощью pip. - + List of macros successfully retrieved. Список макросов успешно получен. - + Retrieving description... Получение описания... - + Retrieving info from Получение информации от - + An update is available for this addon. Для этого дополнения доступно обновление. - + This addon is already installed. Это дополнение уже установлено. - + Retrieving info from git Получение информации из git - + Retrieving info from wiki Получение информации из вики - + GitPython not found. Using standard download instead. GitPython не найден. Вместо этого используется стандартная загрузка. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. По-видимому, ваша версия python не поддерживает ZIP файлы. Продолжение невозможно. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Рабочее окружение успешно установлено. Пожалуйста, перезапустите FreeCAD для применения изменений. - + Missing workbench Отсутствует рабочее окружение - + Missing python module Отсутствует модуль python - + Missing optional python module (doesn't prevent installing) Отсутствует дополнительный модуль python (не запрещает установку) - + Some errors were found that prevent to install this workbench Найдены некоторые ошибки, которые мешают установке этого рабочего окружения - + Please install the missing components first. Сначала установите недостающие компоненты. - + Error: Unable to download Ошибка: Не удалось загрузить - + Successfully installed Успешно установлено - + GitPython not installed! Cannot retrieve macros from git GitPython не установлен! Не удается получить макрос из git @@ -207,72 +207,72 @@ Требуется перезапуск - + This macro is already installed. Этот макрос уже установлен. - + A macro has been installed and is available under Macro -> Macros menu Макрос установлен и доступен меню Макросы -> макрос - + This addon is marked as obsolete Это дополнение помечено как устаревшее - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Это обычно означает, что оно больше не поддерживается, и некоторые более продвинутые дополнения в этом списке обеспечивают те же функции. - + Error: Unable to locate zip from Ошибка: Не удается найти zip из - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Что-то пошло не так при запросе макроса с сайта Git. Возможно исполняемый файл Git не находится в нужном месте - + This addon is marked as Python 2 Only Это дополнение помечено Только для Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Этот верстак больше не может быть поддержан, и установка его на систему с Python 3, вероятно, вызовет ошибки при запуске или во время использования. - + User requested updating a Python 2 workbench on a system running Python 3 - Пользователь запросил обновление рабочего стола Python 2 на системе, запущенной с Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Верстак успешно обновлен. Перезапустите FreeCAD, чтобы применить изменения. - + User requested installing a Python 2 workbench on a system running Python 3 - Пользователь запросил установить верстак для Python 2 на системе Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Возможно, возникла проблема при подключении к Wiki, поэтому в данный момент не удается получить список Wiki-макросов - + Raw markdown displayed Показана исходная разметка - + Python Markdown library is missing. Библиотека Python Markdown отсутствует. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index ca3aba0d5b..18995b5e9a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mesto namestitve @@ -97,97 +97,97 @@ Seznam delovnih okolij je bil posodobljen. - + Outdated GitPython detected, consider upgrading with pip. Zaznan je zastarel GitPython; razmislite o nadgraditivi s pip-om. - + List of macros successfully retrieved. Seznam makrov uspšno pridobljen. - + Retrieving description... Pridobivanje opisov ... - + Retrieving info from Pridobivanje podatkov iz - + An update is available for this addon. Posodobitev za ta dodatek je na voljo. - + This addon is already installed. Ta dodatek je že nameščen. - + Retrieving info from git Pridobivanje podatkov iz git-a - + Retrieving info from wiki Pridobivanje podatkov iz wiki strani - + GitPython not found. Using standard download instead. GitPython ni mogoče najti. Namesto tega je običajno prenašanje. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Kot kaže, vaša različica Pythona ne podpira datotek ZIP. Ni mogoče nadaljevati. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Delovno okolje uspešno nameščeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + Missing workbench Manjkajoče delovno oklje - + Missing python module Manjkajoči Pythonov modul - + Missing optional python module (doesn't prevent installing) Manjkajoči neobvezni Pythonov modul (ne ustavi namestitve) - + Some errors were found that prevent to install this workbench Najdene so bile določene napake, ki preprečujejo namestitev tega delovnega okolja - + Please install the missing components first. Namestite najprej manjkajoče sestavine. - + Error: Unable to download Napaka: Ni mogoče prenesti - + Successfully installed Uspešno nameščeno - + GitPython not installed! Cannot retrieve macros from git GitPython ni nameščen! Makrov ni mogoče pridobiti iz git-a @@ -207,72 +207,72 @@ Potreben ponovni zagon - + This macro is already installed. Ta makro je že nameščen. - + A macro has been installed and is available under Macro -> Macros menu Makro je bil namščen in je dosegljiv preko menija Makro -> Makri - + This addon is marked as obsolete Ta dodatek je označen kot zastarel - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To ponavadi pomeni, da ni več vzdrževan in naprednejši dodatek s tega seznama nudi enake zmožnosti. - + Error: Unable to locate zip from Napaka: Ni mogoče najti zipa od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Pri pridobivanju Git makra se je nekje zalomilo. Najverjetneje Git-ove izvršljive datoteke ni na tej poti - + This addon is marked as Python 2 Only Ta dodatek je označen, da je le za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. To delovno okolje lahko ni več vzdrževano in namestitev v Python 3 okolje bo najverjetneje prinesla napake pri zagonu ali med delovanjem. - + User requested updating a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil posodobitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Delovno okolje je uspešno posodobljeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil namestitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Kaže, da je težava v povezavi z Wiki, zaradi česa trenutno ni mogoče pridobiti seznama Wiki makrov - + Raw markdown displayed Prikazan surov Markdown - + Python Markdown library is missing. Knjižnica Python Markdowna manjka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index 5d80f64a21..d205b8aba3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Det gick inte att hämta en beskrivning för det här makrot. @@ -97,97 +97,97 @@ Arbetsytelista uppdaterades. - + Outdated GitPython detected, consider upgrading with pip. Utdaterad GitPython detekterad, överväg att uppgradera med pip. - + List of macros successfully retrieved. Makrolista hämtades. - + Retrieving description... Hämtar beskrivning... - + Retrieving info from Hämtar information från - + An update is available for this addon. En uppdatering är tillgänglig för detta tillägg. - + This addon is already installed. Det här tillägget är redan installerat. - + Retrieving info from git Hämtar information från git - + Retrieving info from wiki Hämtar information från wiki - + GitPython not found. Using standard download instead. GitPython hittades inte. Vanlig nedladdning används istället. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Din version av Python verkar inte stöda ZIP-filer. Kan inte fortsätta. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbetsytan installerades. Vänligen starta om FreeCAD för att den ska bli tillgänglig i programmet. - + Missing workbench Hittar inte arbetsyta - + Missing python module Hittar inte Python-modul - + Missing optional python module (doesn't prevent installing) Hittar inte frivillig Python-modul (förhindrar inte installation) - + Some errors were found that prevent to install this workbench Några fel hittades som förhindrar installationen av denna arbetsyta - + Please install the missing components first. Vänligen installera de saknade komponenterna först. - + Error: Unable to download Fel: Kan inte ladda ned - + Successfully installed Installationen lyckades - + GitPython not installed! Cannot retrieve macros from git GitPython inte installerad! Kan inte hämta makron från git @@ -207,72 +207,72 @@ Omstart krävs - + This macro is already installed. Det här makrot är redan installerat. - + A macro has been installed and is available under Macro -> Macros menu Ett makro har installerats och är tillgängligt under menyn Makro -> Makron - + This addon is marked as obsolete Detta addon är markerat som föråldrat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Det betyder oftast att den inte längre underhålls, och vissa mer avancerade addon i den här listan ger samma funktionalitet. - + Error: Unable to locate zip from Fel: Det gick inte att hitta zip från - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Något gick fel med Git Macro Retrieval, möjligen Git körbara är inte i sökvägen - + This addon is marked as Python 2 Only Detta addon är markerat som Endast Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Denna arbetsbänk får inte längre underhållas och installera den på ett Python 3-system kommer mer än sannolikt resultera i fel vid start eller när den används. - + User requested updating a Python 2 workbench on a system running Python 3 - Användaren begärde att uppdatera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench uppdateras med lyckat resultat. Vänligen starta om FreeCAD för att tillämpa ändringarna. - + User requested installing a Python 2 workbench on a system running Python 3 - Användaren begärde att installera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Verkar vara ett problem som ansluter till Wiki, kan därför inte hämta Wiki makro lista för tillfället - + Raw markdown displayed Råmarkering visas - + Python Markdown library is missing. Python Markdown-biblioteket saknas. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index daa2d502f7..d147107dd8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Yükleme konumu @@ -97,97 +97,97 @@ Çalışma Tezgahı listesi güncelleştirildi. - + Outdated GitPython detected, consider upgrading with pip. Geçmiş sürüme ait GitPython tespit edildi. Pip ile güncelleştirmeyi değerlendirin. - + List of macros successfully retrieved. Makroların listesi başarı ile alındı. - + Retrieving description... Tanım alınıyor... - + Retrieving info from Bilgi alınıyor - + An update is available for this addon. Bu eklenti için bir güncelleştirme mevcuttur. - + This addon is already installed. Bu eklenti halihazırda yüklüdür. - + Retrieving info from git Git'ten bilgi alınıyor - + Retrieving info from wiki Wiki'den bilgi alınıyor - + GitPython not found. Using standard download instead. GitPython bulunamadı. Standart yüklemeyi kullanmayı deneyin. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sizin Python versiyonunuz ZIP dosyalarını desteklemiyor olabilir. İşlem yapılamadı. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Çalışma Tezgahı başarı ile yüklendi. Değişikliklerin geçerli olması için lütfen FreeCAD'i yeniden başlatın. - + Missing workbench Eksik Çalışma Tezgahı - + Missing python module Eksik Python Modülü - + Missing optional python module (doesn't prevent installing) Eksik opsiyonel pyhton modülü (yüklemeye engel değil) - + Some errors were found that prevent to install this workbench Bu Çalışma Tezgahı'nın yüklenmesini engelleyen bazı hatalar bulundu - + Please install the missing components first. Lüften önce eksik bileşenleri yükleyin. - + Error: Unable to download Hata: İndirilemiyor - + Successfully installed Başarıyla Yüklendi - + GitPython not installed! Cannot retrieve macros from git GitPython kurulu değil! Makrolar Git'ten alınamıyor @@ -207,72 +207,72 @@ Yeniden başlatma gerekli - + This macro is already installed. Bu makro zaten yüklü. - + A macro has been installed and is available under Macro -> Macros menu Bir makro yüklendi ve buna makro->makrolar menüsü altından ulaşılabilir - + This addon is marked as obsolete Bu eklenti eskimiş olarak işaretleniyor - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Bu ifade genellikle, eklentinin artık sürdürülmediği ve bu listedeki bazı daha gelişmiş eklentilerin aynı işlevselliği sunacağı anlamına gelmektedir. - + Error: Unable to locate zip from Hata: Posta kodu bulunamıyor - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git Makro Çağırma ile ilgili bir şeyler ters gitti; muhtemelen Git çalıştırılabilir, adres yolunda değil - + This addon is marked as Python 2 Only Bu eklenti, Sadece Python 2 olarak işaretleniyor - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Bu tezgah artık sürdürülemeyebilir ve bunu Python 3 sistemine yüklemek, başlangıç hatalarında veya kullanım sırasında daha iyi sonuç verecektir. - + User requested updating a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını güncellemek istedi - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Tezgah başarıyla güncellendi. Değişikliklerin uygulanması için lütfen FreeCAD' i yeniden başlatın. - + User requested installing a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını yüklemek istedi - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wiki'ye bağlanma sorunu gibi görünüyor, bu nedenle şu anda Wiki makro listesi alınamıyor - + Raw markdown displayed Ham markdown görüntülendi - + Python Markdown library is missing. Python Markdown kitaplığı eksik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index cc2e4646b8..c0d9896fbf 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Отримання опису... - + Retrieving info from Retrieving info from - + An update is available for this addon. Для цього додатка наявне оновлення. - + This addon is already installed. Цей додаток вже встановлений. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Відсутній модуль python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Помилка: завантаження неможливе - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 7fdec8b2a2..8a4ce594a2 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicació instal·lada @@ -97,97 +97,97 @@ S'ha actualitzat la llista de bancs de treball. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Falta el mòdul python - + Missing optional python module (doesn't prevent installing) Falta el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Instal·leu primer els components que falten. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython. No es poden recuperar les macros de git @@ -207,72 +207,72 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançats d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts index bde947dfd6..1aaa98a9a1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Thiếu môđun python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Vui lòng cài đặt các thành phần còn thiếu trước đã. - + Error: Unable to download Lỗi: Không thể tải về - + Successfully installed Cài đặt thành công - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Yêu cầu khởi động máy - + This macro is already installed. Vĩ lệnh này đã được cài đặt. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index c8ca9f3932..882a8ac416 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安装位置 @@ -97,97 +97,97 @@ 工作台列表已更新。 - + Outdated GitPython detected, consider upgrading with pip. 检测到过时的 GitPython，建议您使用pip进行升级。 - + List of macros successfully retrieved. 成功获取了宏列表。 - + Retrieving description... 正在获取描述... - + Retrieving info from 获取信息 - + An update is available for this addon. 此插件可以更新。 - + This addon is already installed. 此插件已经被安装。 - + Retrieving info from git 从 git 获取信息 - + Retrieving info from wiki 从维基获取信息 - + GitPython not found. Using standard download instead. 找不到 GitPython。改用标准下载。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 您的 python 版本似乎不支持 ZIP 文件。无法继续。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 工作台安装成功。请重新启动 FreeCAD 以应用更改。 - + Missing workbench 缺少工作台 - + Missing python module 缺少 python 模块 - + Missing optional python module (doesn't prevent installing) 缺少可选的 python 模块 (没有阻止安装) - + Some errors were found that prevent to install this workbench 发现一些错误，无法安装这个工作台 - + Please install the missing components first. 请先安装丢失的组件。 - + Error: Unable to download 错误：无法下载 - + Successfully installed 成功安装了 - + GitPython not installed! Cannot retrieve macros from git GitPython 未安装！无法从 git 检索宏 @@ -207,72 +207,72 @@ 需要重启 - + This macro is already installed. 此宏已经安装。 - + A macro has been installed and is available under Macro -> Macros menu 宏已经安装，可以在宏 -> 宏菜单下使用 - + This addon is marked as obsolete 该插件被标记为已过时 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 这通常意味着不再维护它，并且此列表中的一些更高级的插件提供了相同的功能。 - + Error: Unable to locate zip from 错误：无法从中找到邮政编码 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git 宏检索出现问题，可能是 Git 可执行文件不在路径中 - + This addon is marked as Python 2 Only 此插件标记为仅支持 Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. 这个工作台可能不再被维护，在python3系统上安装它很可能会在启动或使用时导致错误。 - + User requested updating a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上更新 Python 2 工作台 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. 工作台已成功更新。请重启 FreeCAD 以应用更改。 - + User requested installing a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上安装 Python 2 工作台 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time 连接到Wiki时出现问题，因此现在无法检索维基宏列表 - + Raw markdown displayed 显示原始Markdown - + Python Markdown library is missing. Python Markdown 库缺失。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index 7eeeb2abe3..6960505568 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安裝位置 @@ -97,97 +97,97 @@ Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench 遺失的工作台 - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 錯誤: 無法下載 - + Successfully installed 安裝成功 - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ 必須重啟 - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete 這個附件己被標記為丟棄 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from 錯誤: 無法取得本地的郵遞區號 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only 這個附件元件標記只能用在Python2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index 25df91771b..56d7e84742 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 6745d606bf..6f43c211bf 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -3301,7 +3301,7 @@ Center - Střed + Na střed diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index bbbd0f105e..e2c51e0eba 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index faf2087c19..53a6729edd 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -2061,7 +2061,7 @@ The computed length of the extrusion path - The computed length of the extrusion path + Die berechnete Länge des Extrusionspfades diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm index d76a0bc90a..00652c62c9 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm and b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index 792268325a..107ea91458 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Si es verdadero, sólo los sólidos serán recolectados por este objeto cuando sean referenciados desde otros archivos A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Un mapa MaterialName:SolidIndexesList que relaciona nombres de materiales con índices de sólido a ser usado al referenciar este objeto desde otros archivos Fuse objects of same material - Fuse objects of same material + Fusionar objetos del mismo material The computed length of the extrusion path - The computed length of the extrusion path + La longitud calculada de la ruta de extrusión Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Distanciamiento inicial a lo largo de la ruta de extrusión (positiva: extiende, negativa: recorta End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Distanciamiento final a lo largo de la ruta de extrusión (positiva: extiende, negativa: recorta Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Alinear automáticamente la base de la estructura perpendicular al Eje de la herramienta X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Desplazamiento X entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Desplazamiento Y entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Rebate la Base a lo largo de su eje Y (sólo se utiliza si BasePerpendicularToTool es verdadero) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Base de rotación en torno del Eje X de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) @@ -3829,32 +3829,32 @@ Creación de piso cancelada. Create Structures From Selection - Create Structures From Selection + Crear estructuras a partir de la selección Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Por favor, seleccione primero el objeto base y luego los bordes a usar como rutas de extrusión Please select at least an axis object - Please select at least an axis object + Por favor seleccione al menos un eje Extrusion Tools - Extrusion Tools + Herramientas de extrusión Select tool... - Select tool... + Seleccionar herramienta... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Selecciona objetos o bordes para usarlos como herramienta (ruta de extrusión) @@ -4633,27 +4633,27 @@ Creación de piso cancelada. Multiple Structures - Multiple Structures + Múltiples estructuras Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Crea varias estructuras de arco desde una base seleccionada, con cada borde seleccionado como ruta de extrusión Structural System - Structural System + Sistema estructural Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Crea un objeto de sistema estructural a partir de una estructura y eje seleccionados Structure tools - Structure tools + Herramientas de estructura diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 6e4890c456..235fc18d88 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index bffb7dbafb..92f5b4ca48 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Si es verdadero, sólo los sólidos serán recolectados por este objeto cuando sean referenciados desde otros archivos A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Un mapa MaterialName:SolidIndexesList que relaciona nombres de materiales con índices de sólido a ser usado al referenciar este objeto desde otros archivos Fuse objects of same material - Fuse objects of same material + Fusionar objetos del mismo material The computed length of the extrusion path - The computed length of the extrusion path + La longitud calculada de la ruta de extrusión Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Distanciamiento inicial a lo largo de la ruta de extrusión (positiva: extiende, negativa: recorta End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Distanciamiento final a lo largo de la ruta de extrusión (positiva: extiende, negativa: recorta Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Alinear automáticamente la base de la estructura perpendicular al Eje de la herramienta X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Desplazamiento X entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Desplazamiento Y entre la Base Original y el Eje de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Rebate la Base a lo largo de su eje Y (sólo se utiliza si BasePerpendicularToTool es verdadero) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Base de rotación en torno del Eje X de la herramienta (sólo se utiliza si BasePerpendicularToTool es verdadero) @@ -3829,32 +3829,32 @@ Creación de piso cancelada. Create Structures From Selection - Create Structures From Selection + Crear estructuras a partir de la selección Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Por favor, seleccione primero el objeto base y luego los bordes a usar como rutas de extrusión Please select at least an axis object - Please select at least an axis object + Por favor seleccione al menos un eje Extrusion Tools - Extrusion Tools + Herramientas de extrusión Select tool... - Select tool... + Seleccionar herramienta... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Selecciona objetos o bordes para usarlos como herramienta (ruta de extrusión) @@ -4633,27 +4633,27 @@ Creación de piso cancelada. Multiple Structures - Multiple Structures + Múltiples estructuras Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Crea varias estructuras de arco desde una base seleccionada, con cada borde seleccionado como ruta de extrusión Structural System - Structural System + Sistema estructural Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Crea un objeto de sistema estructural a partir de una estructura y eje seleccionados Structure tools - Structure tools + Herramientas de estructura diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index d23889342e..5d57883902 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index bf911b05de..1247a7a7ad 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -2036,12 +2036,12 @@ If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Zero ez bada, ardatza ez dira irudikatuko lerro oso gisa, emandako luzera duten bi lerro gisa baizik Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Balio honetaz haratago dagoen geometria moztu egingo da. Ezarri zero mugagabea izan dadin. @@ -2056,12 +2056,12 @@ Fuse objects of same material - Fuse objects of same material + Fusionatu material bereko objektuak The computed length of the extrusion path - The computed length of the extrusion path + Estrusio-bidearen luzera kalkulatua @@ -3829,7 +3829,7 @@ Solairuaren sorrera utzi egin da. Create Structures From Selection - Create Structures From Selection + Sortu egiturak hautapenetik @@ -3839,17 +3839,17 @@ Solairuaren sorrera utzi egin da. Please select at least an axis object - Please select at least an axis object + Hautatu gutxienez ardatz-objektu bat Extrusion Tools - Extrusion Tools + Estrusio-tresnak Select tool... - Select tool... + Hautapen-tresna... @@ -4633,7 +4633,7 @@ Solairuaren sorrera utzi egin da. Multiple Structures - Multiple Structures + Egitura anitz @@ -4643,17 +4643,17 @@ Solairuaren sorrera utzi egin da. Structural System - Structural System + Egiturazko sistema Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Sortu egiturazko sistemen objektu bat hautatutako egitura bat eta ardatz bat erabilita Structure tools - Structure tools + Egitura-tresnak diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index f566ca9c14..a4fb0cf210 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 8183b7d3e3..18fa24505a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -161,7 +161,7 @@ The number of sheets to use - Nombre de feuilles utilisées + Le nombre de feuilles à utiliser @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Si mis à True, seuls les solides seront exportés par cet objet quand il sera référencé dans d'autres fichiers A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Une liste de correspondance NomMatériau:ListeIndexsSolides qui relie les noms des matériaux aux indexs des solides à utiliser quand cet objet est référencé dans d'autres fichiers Fuse objects of same material - Fuse objects of same material + Fusionner les objets ayant le même matériau The computed length of the extrusion path - The computed length of the extrusion path + La longueur calculée du chemin d'extrusion Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Distance de décalage du début le long du chemin d'extrusion (positif : étendre ; négatif : rogner End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Distance de décalage de fin le long du chemin d'extrusion (positif : étendre ; négatif : rogner Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Alignez automatiquement la base de la structure perpendiculaire à l'axe outil X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Décalage X entre l'origine de la base et l'axe outil (utilisé uniquement si BasePerpendicularToTool est True) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Décalage Y entre l'origine de la base et l'axe outil (utilisé uniquement si BasePerpendicularToTool est True) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Retourner la base le long de son axe Y (utilisé uniquement si BasePerpendicularToTool est True) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Rotation de la base autour de l'axe outil (utilisé uniquement si BasePerpendicularToTool est True) @@ -3819,32 +3819,32 @@ Création d'étage abandonnée. Create Structures From Selection - Create Structures From Selection + Créer des structures à partir de la sélection Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Sélectionnez d'abord l'objet de base, puis les arêtes à utiliser comme chemins d'extrusion Please select at least an axis object - Please select at least an axis object + Sélectionnez au moins un axe Extrusion Tools - Extrusion Tools + Outils d'extrusion Select tool... - Select tool... + Sélectionnez un outil ... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Sélectionnez un objet ou des arêtes à utiliser comme outil (chemin d'extrusion) @@ -4623,27 +4623,27 @@ Création d'étage abandonnée. Multiple Structures - Multiple Structures + Structures multiples Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Créer plusieurs objets Structure Arh à partir d'une base sélectionnée, en utilisant chaque arête sélectionnée comme chemin d'extrusion Structural System - Structural System + Système structurel Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Créer un objet système structurel à partir d'une structure et d'un axe sélectionnés Structure tools - Structure tools + Outils de structure diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index 808cad2793..ab7927f500 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 9ad7966514..52f167e774 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Ha ez igaz, akkor ez a tárgy csak akkor gyűjti a szilárd test adatokat, ha más fájlokból hivatkozik rá A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + A MaterialName:SolidIndexesList térkép, amely a tárgy más fájlokból történő hivatkozása során használandó szilárd indexű anyagnevek Fuse objects of same material - Fuse objects of same material + Azonos anyagú tárgyak összekapcsolása The computed length of the extrusion path - The computed length of the extrusion path + A kihúzási útvonal számított hossza Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Indítási távolság a kihúzási útvonal mentén (pozitív: kiterjesztés, negatív: vágás End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Véghosszú húzótávolság a kihúzás útvonal mentén (pozitív: hosszabbítás, negatív: vágás Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + A szerszámtengelyre merőleges szerkezetalap automatikus igazítása X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + X eltolás az alappont és a szerszámtengely között (csak akkor használható, ha a BasePerpendicularTool igaz) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Y eltolás az alap eredete és a szerszámtengely között (csak akkor használható, ha a BasePerpendicularTool igaz) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Tükrözze az alap mentén az Y tengely (csak akkor használják, ha BasePerpendicularTool igaz) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Alap forgás a szerszámtengely körül (csak akkor használható, ha a BasePerpendicularTool igaz) @@ -3829,32 +3829,32 @@ Szint létrehozása megszakítva. Create Structures From Selection - Create Structures From Selection + Struktúrák létrehozása kijelölt elemekből Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Először jelölje ki az alap tárgyat, majd a kihúzási útvonalként használni kívánt útvonalat Please select at least an axis object - Please select at least an axis object + Kérem válasszon legalább egy tengelyt Extrusion Tools - Extrusion Tools + Kihúzás eszközök Select tool... - Select tool... + Válassza ki az eszközt... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Jelölje ki az eszközként használni kívánt tárgyat vagy éleket (kihúzási útvonal) @@ -4633,27 +4633,27 @@ Szint létrehozása megszakítva. Multiple Structures - Multiple Structures + Több szerkezet Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Több architektúra-szerkezeti tárgy létrehozása egy kijelölt alapból, az egyes kijelölt élek mint kihúzási útvonalak használatával Structural System - Structural System + Szerkezeti rendszer Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Szerkezeti elrendezési tárgy létrehozása kijelölt szerkezetekből és tengelyekből Structure tools - Structure tools + Szerkezeti eszközök diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index 9a95d5d0d7..65cd24cbe3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index aea1db9cdc..6f1edb5aa7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -2046,7 +2046,7 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Se Vero, solo i solidi saranno raccolti da questo oggetto quando sono referenziati da altri file @@ -2056,47 +2056,47 @@ Fuse objects of same material - Fuse objects of same material + Fondi oggetti dello stesso materiale The computed length of the extrusion path - The computed length of the extrusion path + La lunghezza calcolata del percorso di estrusione Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Distanza di spostamento iniziale lungo il percorso di estrusione (positiva: estende, negativa: taglia End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Distanza di spostamento finale lungo il percorso di estrusione (positiva: estende, negativa: taglia Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Allineare automaticamente la base della struttura perpendicolare all'asse dello strumento X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Spostamento X tra l'origine della base e l'asse dello strumento (usato solo se BasePerpendicularToTool è Vero) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Spostamento Y tra l'origine della base e l'asse dello strumento (usato solo se BasePerpendicularToTool è Vero) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Specchia la base lungo il suo asse Y (usato solo se BasePerpendicularToTool è Vero) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Rotazione di base attorno all'asse dello strumento (usata solo se BasePerpendicularToTool è Vero) @@ -3829,22 +3829,22 @@ Creazione del Livello interrotta. Create Structures From Selection - Create Structures From Selection + Crea strutture dalla selezione Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Si prega di selezionare l'oggetto base prima e quindi i bordi da usare come percorsi di estrusione Please select at least an axis object - Please select at least an axis object + Si prega di selezionare almeno un oggetto asse Extrusion Tools - Extrusion Tools + Strumenti di estrusione @@ -3854,7 +3854,7 @@ Creazione del Livello interrotta. Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Seleziona oggetto o bordi da usare come strumento (percorso di estrusione) @@ -4633,7 +4633,7 @@ Creazione del Livello interrotta. Multiple Structures - Multiple Structures + Strutture Multiple @@ -4643,17 +4643,17 @@ Creazione del Livello interrotta. Structural System - Structural System + Sistema Strutturale Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Crea un oggetto di sistema strutturale da una struttura e un asse selezionati Structure tools - Structure tools + Strumenti di struttura diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index f58516633b..b51404278d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index d05aa0fb30..3cd7e87b92 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -11,7 +11,7 @@ The angles of each axis - Kąty każdej osi + Kąty nachylenia osi @@ -41,7 +41,7 @@ The object this component is cloning - Obiekt jest klonowany przez ten komponent + Obiekt, z którego sklonowano ten komponent @@ -61,7 +61,7 @@ An optional tag for this component - Opcjonalna etykieta dla tego komponentu + Opcjonalny znacznik dla tego komponentu @@ -71,7 +71,7 @@ Specifies if this object must move together when its host is moved - Określa, czy obiekt musi poruszać się razem z hostem + Określa, czy obiekt ma poruszać się razem z gospodarzem @@ -81,7 +81,7 @@ The area of the projection of this object onto the XY plane - Powierzchnia rzutu tego obiektu na płaszczyznę XY + Pole powierzchni rzutu tego obiektu na płaszczyznę XY @@ -96,7 +96,7 @@ Additional snap points for this equipment - Dodatkowe punkty przyciągania do tego sprzętu + Dodatkowe punkty przyciągania dla tego sprzętu @@ -156,7 +156,7 @@ The thickness or extrusion depth of this element - Grubość lub głębokość tego elementu + Grubość lub głębokość wytłoczenia tego elementu @@ -191,7 +191,7 @@ The area of this panel - Obszar tego panelu + Pole powierzchni tego panelu @@ -211,7 +211,7 @@ The line width of the rendered objects - Gruboć linii renderowanych obiektów + Grubość linii renderowanych obiektów @@ -271,7 +271,7 @@ The linked Panel cuts - Połączony Panel wycięcia + Powiązane wycięcia Panelu @@ -466,7 +466,7 @@ Wall thickness - Grubość ścianki + Grubość ściany @@ -711,7 +711,7 @@ The finishing of the floor of this space - Wykończenie piętra tej przestrzeni + Wykończenie podłogi tej przestrzeni @@ -776,7 +776,7 @@ The color of the area text - Kolor obszaru tekstu + Kolor tekstu pola powierzchni @@ -1246,7 +1246,7 @@ If true, when activated, the working plane will automatically adapt to this level - Jeżeli prawda, wtedy aktywuje się, płaszczyzna robocza automatycznie dostosowuje się do tej kondygnacji + Jeśli parametr ma wartość Prawda, po włączeniu tej opcji płaszczyzna robocza zostanie automatycznie dostosowana do tej kondygnacji @@ -1606,7 +1606,7 @@ If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - Jeśli prawda, pokaż obiekty zawarte w tej części budynku przyjmą te linie, ustawienia kolorów i przezroczystości + Jeśli parametr ma wartość prawda, pokazane obiekty zawarte w tej części budynku przyjmą te ustawienia dla linii, koloru i przezroczystości @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Jeśli parametr ma wartość Prawda, tylko bryły będą gromadzone przez ten obiekt, gdy istnieją odniesienia z innych plików A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Nazwa materiału: Lista indeksów brył, łączących nazwy materiałów z indeksami brył, które mają być używane podczas tworzenia odniesień do tego obiektu z innych plików Fuse objects of same material - Fuse objects of same material + Łączenie obiektów z tego samego materiału The computed length of the extrusion path - The computed length of the extrusion path + Obliczona długość ścieżki wyciągnięcia Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Odległość odsunięcia początku wzdłuż trasy wyciągnięcia (dodatnia: wydłuż, ujemna: utnij End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Odległość odsunięcia końca wzdłuż trasy wyciągnięcia (dodatnia: wydłuż, ujemna: utnij Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Wyrównaj automatycznie podstawę konstrukcji prostopadle do osi narzędzia X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Przesunięcie X pomiędzy punktem bazowym i osią narzędzia (używane wyłącznie, gdy parametr BasePerpendicularToTool ma wartość Prawda) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Przesunięcie Y pomiędzy punktem bazowym i osią narzędzia (używane wyłącznie, gdy parametr BasePerpendicularToTool ma wartość Prawda) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Odbicie lustrzane bazy wzdłuż jej osi Y (używane tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Podstawowy obrót wokół osi narzędzia (używany tylko jeśli parametr BasePerpendicularToTool ma wartość Prawda) @@ -3826,32 +3826,32 @@ Tworzenie piętra zostało przerwane. Create Structures From Selection - Create Structures From Selection + Utwórz konstrukcje z zaznaczonych elementów Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Proszę wybrać najpierw obiekt bazowy, a następnie krawędzie, które mają być użyte jako ścieżki wyciągnięcia Please select at least an axis object - Please select at least an axis object + Proszę wybierz przynajmniej jedną oś Extrusion Tools - Extrusion Tools + Narzędzia do wyciągania Select tool... - Select tool... + Wybierz narzędzie ... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Wybierz obiekt lub krawędzie do użycia jako narzędzie (ścieżka wyciągania) @@ -4630,27 +4630,27 @@ Tworzenie piętra zostało przerwane. Multiple Structures - Multiple Structures + Wiele konstrukcji Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Tworzenie wielu obiektów konstrukcji Architektury z wybranej podstawy, używając każdej wybranej krawędzi jako ścieżki wyciągnięcia Structural System - Structural System + Układ konstrukcyjny Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Utwórz obiekt układu konstrukcyjnego z wybranych konstrukcji oraz osi Structure tools - Structure tools + Narzędzia konstrukcyjne diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index fbf47cb944..0076289896 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index ee434ed20e..f5878f85ca 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -5285,7 +5285,7 @@ Leave blank to use all objects from the document General settings - Общие настройки + Основные настройки diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index c71f6d9d31..827962b83c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index 5bf79ffc5b..7cf11432a6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -2046,57 +2046,57 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Če drži, bodo pri sklicevanj na druge datoteke s tem predmetom nabrana le telesa A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Preslikava ImeSnovi:SeznamKazalTeles, ki povezuje imena snovi s kazalom teles. Uporablja se pri sklicevanju tega predmeta z drugih datotek Fuse objects of same material - Fuse objects of same material + Združi predmete iz enake snovi The computed length of the extrusion path - The computed length of the extrusion path + Izračunana dolžina poti izrivanja Start offset distance along the extrusion path (positive: extend, negative: trim - Start offset distance along the extrusion path (positive: extend, negative: trim + Razdalja začetnega zamika vzdolž poti izrivanja (pozitivno: podaljša, negativno: skrajša) End offset distance along the extrusion path (positive: extend, negative: trim - End offset distance along the extrusion path (positive: extend, negative: trim + Razdalja zamika zaključka vzdolž poti izrivanja (pozitivno: podaljša, negativno: skrajša) Automatically align the Base of the Structure perpendicular to the Tool axis - Automatically align the Base of the Structure perpendicular to the Tool axis + Samodejna naravnaj osnovo konstrukcije pravokotno na osi orodja X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + X zamik izhodišča osnove glede na osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + Y zamik izhodišča osnove glede na osi orodja (uporablja se le, če je Pravokotost osnove na orodje omogočeno) Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + Prezrcali osnovo skozi njeno os Y (uporablja se le, če je Pravokotnost osnove na orodje omogočena) Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + Sukanje osnove okoli osi orodja (uporablja se le, če je Pravokotnost osnove na orodje omogočena) @@ -2414,7 +2414,7 @@ Create Structural System - Ustvari konstrukcijski sistem + Ustvari konstrukcijski sklop @@ -3827,32 +3827,32 @@ Ustvarjanje etaže prekinjeno. Create Structures From Selection - Create Structures From Selection + Ustvari iz izbora konstrukcije Please select the base object first and then the edges to use as extrusion paths - Please select the base object first and then the edges to use as extrusion paths + Izberite najprej osnovni predmet in nato robove, ki jih želite uporabiti kot pot izrivanja Please select at least an axis object - Please select at least an axis object + Izberite vsaj osni predmet Extrusion Tools - Extrusion Tools + Izrivalna orodja Select tool... - Select tool... + Izbiranje orodja ... Select object or edges to be used as a Tool (extrusion path) - Select object or edges to be used as a Tool (extrusion path) + Izberite predmet ali robove, ki jih želite uporabiti kot orodje (pot izrivanja) @@ -4631,27 +4631,27 @@ Ustvarjanje etaže prekinjeno. Multiple Structures - Multiple Structures + Več konstrukcij Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path - Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path + Ustvari iz izbrane osnove več konstrukcijskih predmetov arhitekture, pri čemer naj bo vsak izbrani rob pot izrivanja Structural System - Structural System + Konstrukcijski sklop Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Ustvari konstrukcijski sklop iz izbrane konstrukcije in osi Structure tools - Structure tools + Konstrukcijska orodja diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index e3fab3fa58..7a9e557a52 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index 9120ad1935..72a1becfa3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -2046,17 +2046,17 @@ If true, only solids will be collected by this object when referenced from other files - If true, only solids will be collected by this object when referenced from other files + Doğruysa yalnızca katı cisimler, diğer dosyalardan tasdiklenen bu nesne tarafından toplanacaktır A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files + Bir malzemeAdı: Katı cismi ilişkilendiren malzeme isimleri KatıİçindekilerListesi haritası, diğer dosylardan bu nesneyi tasdiklenmesi için kullanılır Fuse objects of same material - Fuse objects of same material + Aynı malzemenin nesnelerini kaynaştırın diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.qm b/src/Mod/Arch/Resources/translations/Arch_vi.qm index 468dd729d3..2458775f9d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_vi.qm and b/src/Mod/Arch/Resources/translations/Arch_vi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index 1ff5e176d0..cab92be21e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -3829,7 +3829,7 @@ Floor creation aborted. Create Structures From Selection - Create Structures From Selection + Tạo kết cấu từ lựa chọn @@ -3839,17 +3839,17 @@ Floor creation aborted. Please select at least an axis object - Please select at least an axis object + Hãy chọn ít nhất một trục Extrusion Tools - Extrusion Tools + Công cụ đùn Select tool... - Select tool... + Chọn công cụ... @@ -4633,7 +4633,7 @@ Floor creation aborted. Multiple Structures - Multiple Structures + Nhiều kết cấu @@ -4643,17 +4643,17 @@ Floor creation aborted. Structural System - Structural System + Hệ thống kết cấu Create a structural system object from a selected structure and axis - Create a structural system object from a selected structure and axis + Tạo một đối tượng hệ thống kết cấu từ kết cấu được chọn và trục Structure tools - Structure tools + Công cụ kết cấu diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.qm b/src/Mod/Draft/Resources/translations/Draft_ar.qm index 0695c29360..6c912319a8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ar.qm and b/src/Mod/Draft/Resources/translations/Draft_ar.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.ts b/src/Mod/Draft/Resources/translations/Draft_ar.ts index 143d1549c2..ec7d3ffbd2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ar.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ar.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2987,12 +2992,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5345,7 +5350,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6428,17 +6433,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_bg.qm b/src/Mod/Draft/Resources/translations/Draft_bg.qm index 2e795554fa..d65e0c8190 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_bg.qm and b/src/Mod/Draft/Resources/translations/Draft_bg.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_bg.ts b/src/Mod/Draft/Resources/translations/Draft_bg.ts index 9fe0e97b8b..ab4bcdc1b8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_bg.ts +++ b/src/Mod/Draft/Resources/translations/Draft_bg.ts @@ -953,7 +953,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1155,6 +1155,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1496,27 +1501,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2977,12 +2982,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5334,7 +5339,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -5848,7 +5853,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Create text - Create text + Създаване надпис @@ -6417,17 +6422,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 7a3d047c4e..3139d64e79 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index b5be501578..1440b8b9bb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -950,7 +950,7 @@ beyond the dimension line Mostra la cota i les fletxes - + If it is true, the objects contained within this layer will adopt the line color of the layer Si és cert, els objectes continguts a aquesta capa adoptarà el color de la línia de la capa @@ -1152,6 +1152,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1493,27 +1498,27 @@ mitjançant l'opció Eines ->Gestor de complements Afegeix una capa - + Toggles Grid On/Off Conmuta la quadrícula activa/inactiva - + Object snapping Ajustament d'objectes - + Toggles Visual Aid Dimensions On/Off Activa o desactiva les cotes d'ajut visual - + Toggles Ortho On/Off Activa o desactiva l'Ortho - + Toggles Constrain to Working Plane On/Off Activa o desactiva la restricció al pla de treball @@ -2956,12 +2961,12 @@ Pendent sempre canviarà el valor de Z, així que aquesta ordre només funciona Draft_Snap - + Toggles Grid On/Off Conmuta la quadrícula activa/inactiva - + Toggle Draft Grid Commuta la graella d'Esbós @@ -5281,7 +5286,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Ajust de l'Esbós @@ -6363,17 +6368,17 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Seleccioneu el contingut de la capa - + custom personalitzat - + Unable to convert input into a scale factor No es pot convertir l'entrada a un factor d'escala - + Set custom annotation scale in format x:x, x=x Estableix l'escala personalitzada de l'anotació amb el format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index 3243717c33..e156dc7f95 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 6076807bac..329bb3b6dc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -955,7 +955,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1157,6 +1157,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1498,27 +1503,27 @@ z menu Nástroje -> Manažer doplňků Přidat novou vrstvu - + Toggles Grid On/Off Zapnout/vypnout mřížku - + Object snapping Přitahování objektu - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Zapnout/vypnout Orto - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2978,12 +2983,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Zapnout/vypnout mřížku - + Toggle Draft Grid Toggle Draft Grid @@ -3006,7 +3011,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Center - Střed + Na střed @@ -3045,7 +3050,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Extension - Extension + Rozšíření @@ -5331,7 +5336,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6413,17 +6418,17 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Select layer contents - + custom - custom + vlastní - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 3b18222c2e..27e5e080c9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 43a80d9b67..b12e6c633f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -960,7 +960,7 @@ beyond the dimension line Zeigt die Maßlinie und die Pfeile an - + If it is true, the objects contained within this layer will adopt the line color of the layer Wenn es wahr ist, übernehmen die Objekte dieser Ebene die Linienfarbe der Ebene @@ -1134,17 +1134,17 @@ Benutzen Sie 'arch' um die US-Bogen Notation zu erzwingen The base object used by this object - The base object used by this object + Das von diesem Objekt verwendete Basisobjekt The PAT file used by this object - The PAT file used by this object + Die von diesem Objekt verwendete PAT-Datei The pattern name used by this object - The pattern name used by this object + Der von diesem Objekt verwendete Mustername @@ -1161,6 +1161,11 @@ Benutzen Sie 'arch' um die US-Bogen Notation zu erzwingen If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1500,27 +1505,27 @@ from menu Tools -> Addon Manager Neue Ebene hinzufügen - + Toggles Grid On/Off Gitter ein/aus - + Object snapping Objekt einrasten - + Toggles Visual Aid Dimensions On/Off Schaltet visuelle Hilfsmaße ein/aus - + Toggles Ortho On/Off Ortho ein/aus - + Toggles Constrain to Working Plane On/Off Schaltet die Beschränkung auf die Arbeitsebene ein oder aus @@ -1710,7 +1715,7 @@ Die Anordnung kann in eine orthogonale oder polare Anordnung durch ändern des T You must choose a base object before using this command - You must choose a base object before using this command + Du musst ein Basisobjekt auswählen, bevor du diesen Befehl verwendest @@ -2530,7 +2535,7 @@ Wenn andere Objekte ausgewählt sind, werden diese ignoriert. Create hatches on selected faces - Create hatches on selected faces + Schraffuren auf ausgewählten Flächen erstellen @@ -2977,12 +2982,12 @@ gerade Entwurfslinien, die in der XY-Ebene gezeichnet werden. Ausgewählte Objek Draft_Snap - + Toggles Grid On/Off Gitter ein/aus - + Toggle Draft Grid Entwurfsgitter umschalten @@ -3846,12 +3851,12 @@ value by using the [ and ] keys while drawing pattern files (*.pat) - pattern files (*.pat) + Musterdateien (*.pat) PAT file: - PAT file: + PAT-Datei: @@ -3861,7 +3866,7 @@ value by using the [ and ] keys while drawing Pattern: - Pattern: + Muster: @@ -5291,7 +5296,7 @@ Note: C++ exporter is faster, but is not as featureful yet Did not find enough coordinates - Did not find enough coordinates + Es wurden nicht genügend Koordinaten gefunden @@ -5323,7 +5328,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Entwurfsraster Einrasten @@ -6403,17 +6408,17 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Ebeneninhalt auswählen - + custom benutzerdefiniert - + Unable to convert input into a scale factor Eingabe kann nicht in einen Skalierungsfaktor konvertiert werden - + Set custom annotation scale in format x:x, x=x Legen Sie den benutzerdefinierte Anmerkungs Massstab im Format x:x, x=x fest diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 0cd9f6e0c1..0bb1a072dd 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index afb9710cc1..d3ee635b8e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2985,12 +2990,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5342,7 +5347,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6425,17 +6430,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm index bd0ccc3036..b7f53d9988 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm and b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index 332490a326..73f5f9563a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -963,7 +963,7 @@ más allá de la línea de dimensión Muestra las flechas y la línea de cota - + If it is true, the objects contained within this layer will adopt the line color of the layer Si es verdadero, los objetos contenidos en esta capa adoptarán el color de línea de la capa @@ -1137,32 +1137,37 @@ Utilice 'arch' para forzar notación de arco de Estados Unidos The base object used by this object - The base object used by this object + El objeto base usado por este objeto The PAT file used by this object - The PAT file used by this object + Ruta usada por este objeto The pattern name used by this object - The pattern name used by this object + Nombre del patrón utilizado por este objeto The pattern scale used by this object - The pattern scale used by this object + Escala del patrón usado por este objeto The pattern rotation used by this object - The pattern rotation used by this object + Rotación del patrón usado por este objeto If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Ajustado a Falso, la trama es aplicado como es a las caras, sin traslación (esto puede dar malos resultados en caras no-ortogonales) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1505,27 +1510,27 @@ desde el menú Herramientas -> Administrador de Complementos Añadir nueva capa - + Toggles Grid On/Off Alternar Rejilla Encendido/Apagado - + Object snapping Ajuste de objetos - + Toggles Visual Aid Dimensions On/Off Activa o desactiva las dimensiones de ayuda visual - + Toggles Ortho On/Off Alterna Ortho Encender/Apagar - + Toggles Constrain to Working Plane On/Off Activa / desactiva restringir al plano de trabajo @@ -1715,7 +1720,7 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo. You must choose a base object before using this command - You must choose a base object before using this command + Debe seleccionar un objeto base antes de usar este comando @@ -2536,7 +2541,7 @@ Si otros objetos son seleccionados son ignorados. Create hatches on selected faces - Create hatches on selected faces + Crear tramas en las caras seleccionadas @@ -2984,12 +2989,12 @@ líneas de Borrador recto que se dibujan en el plano XY. Los objetos seleccionad Draft_Snap - + Toggles Grid On/Off Alternar Rejilla Encendido/Apagado - + Toggle Draft Grid Cambiar cuadrícula de Borrador @@ -3856,12 +3861,12 @@ valor usando las teclas [y] mientras dibuja pattern files (*.pat) - pattern files (*.pat) + archivos de patrón (*.pat) PAT file: - PAT file: + Archivo de patrón: @@ -3871,7 +3876,7 @@ valor usando las teclas [y] mientras dibuja Pattern: - Pattern: + Patrón: @@ -5304,7 +5309,7 @@ Nota: la exportación mediante C++ es más rápida, pero no está completada Did not find enough coordinates - Did not find enough coordinates + No se encontraron coordenadas suficientes @@ -5336,7 +5341,7 @@ Nota: la exportación mediante C++ es más rápida, pero no está completada Workbench - + Draft Snap Ajuste del Borrador @@ -6416,17 +6421,17 @@ Para habilitar FreeCAD para descargar estas bibliotecas, responda Sí.Seleccionar contenido de la capa - + custom personalizado - + Unable to convert input into a scale factor No se puede convertir la entrada en un factor de escala - + Set custom annotation scale in format x:x, x=x Establecer escala de anotación personalizada en formato x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index 56bb403af4..688927c5a3 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 4ded1d0719..68e1356798 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -963,7 +963,7 @@ más allá de la línea de dimensión Muestra las flechas y la línea de cota - + If it is true, the objects contained within this layer will adopt the line color of the layer Si es verdadero, los objetos contenidos en esta capa adoptarán el color de línea de la capa @@ -1137,32 +1137,37 @@ Utilice 'arch' para forzar notación de arco de Estados Unidos The base object used by this object - The base object used by this object + El objeto base usado por este objeto The PAT file used by this object - The PAT file used by this object + Ruta usada por este objeto The pattern name used by this object - The pattern name used by this object + Nombre del patrón utilizado por este objeto The pattern scale used by this object - The pattern scale used by this object + Escala del patrón usado por este objeto The pattern rotation used by this object - The pattern rotation used by this object + Rotación del patrón usado por este objeto If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Ajustado a Falso, la trama es aplicado como es a las caras, sin traslación (esto puede dar malos resultados en caras no-ortogonales) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1505,27 +1510,27 @@ desde el menú Herramientas -> Administrador de complementos Añadir nueva capa - + Toggles Grid On/Off Alternar Rejilla Encendido/Apagado - + Object snapping Ajuste de objetos - + Toggles Visual Aid Dimensions On/Off Activa o desactiva las dimensiones de ayuda visual - + Toggles Ortho On/Off Alterna Ortho Encender/Apagar - + Toggles Constrain to Working Plane On/Off Activa / desactiva restringir al plano de trabajo @@ -1715,7 +1720,7 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo. You must choose a base object before using this command - You must choose a base object before using this command + Debe seleccionar un objeto base antes de usar este comando @@ -2536,7 +2541,7 @@ Si otros objetos son seleccionados son ignorados. Create hatches on selected faces - Create hatches on selected faces + Crear tramas en las caras seleccionadas @@ -2984,12 +2989,12 @@ líneas de Borrador recto que se dibujan en el plano XY. Los objetos seleccionad Draft_Snap - + Toggles Grid On/Off Alternar Rejilla Encendido/Apagado - + Toggle Draft Grid Cambiar cuadrícula de Borrador @@ -3858,12 +3863,12 @@ usando las teclas [ y ] mientras dibuja pattern files (*.pat) - pattern files (*.pat) + archivos de patrón (*.pat) PAT file: - PAT file: + Archivo de patrón: @@ -3873,7 +3878,7 @@ usando las teclas [ y ] mientras dibuja Pattern: - Pattern: + Patrón: @@ -5305,7 +5310,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavía Did not find enough coordinates - Did not find enough coordinates + No se encontraron coordenadas suficientes @@ -5337,7 +5342,7 @@ Nota: el exportador de C++ es más rápido, no está implementado todavía Workbench - + Draft Snap Ajuste del Borrador @@ -6416,17 +6421,17 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Seleccionar contenido de la capa - + custom personalizado - + Unable to convert input into a scale factor No se puede convertir la entrada en un factor de escala - + Set custom annotation scale in format x:x, x=x Establecer escala de anotación personalizada en formato x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 8aafdccb69..594b09afb9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index 650abcf7ff..7964ac92c6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -960,7 +960,7 @@ haratago duen luzera Kota-lerroak eta geziak erakusten ditu - + If it is true, the objects contained within this layer will adopt the line color of the layer Egia bada, geruza honek dituen objektuek geruzaren lerro-kolorea hartuko dute @@ -1135,32 +1135,37 @@ Erabili 'arch' US arku-notazioa behartzeko. The base object used by this object - The base object used by this object + Objektu honek darabilen oinarri-objektua The PAT file used by this object - The PAT file used by this object + Objektu honek darabilen PAT fitxategia The pattern name used by this object - The pattern name used by this object + Objektu honek darabilen eredu-izena The pattern scale used by this object - The pattern scale used by this object + Objektu honek darabilen eredu-eskala The pattern rotation used by this object - The pattern rotation used by this object + Objektu honek darabilen eredu-biraketa If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Faltsua bada, itzaleztadura bere horretan aplikatuko zaie aurpegiei, translaziorik gabe (horrek emaitza okerrak eman baititzake XY ez diren aurpegietan) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1503,27 +1508,27 @@ Instalatu DXF liburutegiaren gehigarria eskuz Gehitu geruza berria - + Toggles Grid On/Off Sareta aktibatzen/desaktibatzen du - + Object snapping Objektu-atxikitzea - + Toggles Visual Aid Dimensions On/Off Ikusizko laguntza-kotak aktibatzen/desaktibatzen ditu - + Toggles Ortho On/Off Ortogonala aktibatzen/desaktibatzen du - + Toggles Constrain to Working Plane On/Off Laneko planora murriztea aktibatzen/desaktibatzen du @@ -1713,7 +1718,7 @@ Matrizearen mota aldatu daiteke, polarra edo zirkularra izan dadin. You must choose a base object before using this command - You must choose a base object before using this command + Oinarri-objektu bat hautatu behar da komando hau erabili baino lehen @@ -2534,7 +2539,7 @@ Beste objektu batzuk hautatuta badude, ez ikusiarena egiten zaie. Create hatches on selected faces - Create hatches on selected faces + Sortu itzaleztadurak aurpegi hautatuetan @@ -2984,12 +2989,12 @@ zuzenetan soilik funtzionatuko du ongi. Lerro bakunak ez diren hautatutako objek Draft_Snap - + Toggles Grid On/Off Sareta aktibatzen/desaktibatzen du - + Toggle Draft Grid Txandakatu zirriborro-sareta @@ -3851,12 +3856,12 @@ value by using the [ and ] keys while drawing pattern files (*.pat) - pattern files (*.pat) + eredu-fitxategiak (*.pat) PAT file: - PAT file: + PAT fitxategia: @@ -3866,7 +3871,7 @@ value by using the [ and ] keys while drawing Pattern: - Pattern: + Eredua: @@ -5296,7 +5301,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Did not find enough coordinates - Did not find enough coordinates + Ez da koordenatu nahikorik aurkitu @@ -5328,7 +5333,7 @@ Oharra: C++ esportatzailea azkarragoa da, baina oraindik eginbide gutxiago ditu. Workbench - + Draft Snap Zirriborro-atxikitzea @@ -6411,17 +6416,17 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Hautatu geruza-edukiak - + custom pertsonalizatua - + Unable to convert input into a scale factor Sarrera ezin izan da eskala-faktore bihurtu - + Set custom annotation scale in format x:x, x=x Ezarri oharpen-eskala pertsonalizatua x:x, x=x formatuan @@ -7476,15 +7481,15 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau. Coordinates relative to last point or to coordinate system origin if is the first point to set - Coordinates relative to last point or to coordinate system origin -if is the first point to set + Koordenatuak azken puntuarekiko edo koordenatu-sistemaren jatorriarekiko, +ezarriko den lehen puntua bada Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - Coordinates relative to global coordinate system. -Uncheck to use working plane coordinate system + Koordenatuak koordenatu-sistema globalarekiko. +Desmarkatu laneko planoaren koordenatu-sistema erabiltzeko @@ -7578,7 +7583,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Offset angle - Offset angle + Desplazamendu-angelua diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index 324acf34af..b38549e54e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index 31128516d5..5c1ce40ded 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -953,7 +953,7 @@ mittajanan jälkeen Näyttää mittalinjan ja nuolinäppäimet - + If it is true, the objects contained within this layer will adopt the line color of the layer Jos on tosi, niin tämän kerroksen sisältämät objektit saavat kerroksen linjan värin @@ -1155,6 +1155,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1496,27 +1501,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2977,12 +2982,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5332,7 +5337,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6415,17 +6420,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm index 553f00a900..1d17566798 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index 8795bf9a17..1bad78b667 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ mula sa kasangkapan menu-> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2988,12 +2993,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5346,7 +5351,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6430,17 +6435,17 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index e1ed8d7df5..d00cdd6a79 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 19ed406691..29c571d08b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -956,7 +956,7 @@ au-delà de la ligne de cote Afficher la ligne et les flèches de cotes - + If it is true, the objects contained within this layer will adopt the line color of the layer Si c'est vrai, les objets contenus dans ce calque adopteront la couleur de ligne du calque @@ -1129,32 +1129,37 @@ Utilisez 'arch' pour forcer la notation architecturale US The base object used by this object - The base object used by this object + L'objet de base utilisé par cet objet The PAT file used by this object - The PAT file used by this object + Le fichier PAT utilisé par cet objet The pattern name used by this object - The pattern name used by this object + Le nom du motif utilisé par cet objet The pattern scale used by this object - The pattern scale used by this object + La mise à l'échelle du motif utilisée par cet objet The pattern rotation used by this object - The pattern rotation used by this object + La rotation du motif utilisée par cet objet If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Si réglé à False, le hachurage est appliqué tel quel sur les faces, sans déplacement (peut donner de mauvais résultats sur les faces non XY) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1495,27 +1500,27 @@ from menu Tools -> Addon Manager Ajouter un nouveau calque - + Toggles Grid On/Off Active/désactive la grille - + Object snapping Aimantation aux objets - + Toggles Visual Aid Dimensions On/Off Active/désactive les Cotes de l'Aide Visuelle - + Toggles Ortho On/Off Active/désactive le mode Orthogonal - + Toggles Constrain to Working Plane On/Off Active/désactive l'Accrochage au Plan de Travail @@ -1705,7 +1710,7 @@ Le réseau peut être transformé en réseau polaire ou circulaire en changeant You must choose a base object before using this command - You must choose a base object before using this command + Vous devez choisir un objet de base avant d'utiliser cette commande @@ -2526,7 +2531,7 @@ Si d'autres objets sont sélectionnés, ils sont ignorés. Create hatches on selected faces - Create hatches on selected faces + Créer des hachures sur les faces sélectionnées @@ -2975,12 +2980,12 @@ les lignes droites Draft qui sont dessinées dans le plan XY. Les objets sélect Draft_Snap - + Toggles Grid On/Off Active/désactive la grille - + Toggle Draft Grid Basculer la Grille Draft @@ -3849,12 +3854,12 @@ en utilisant les touches [ et ] lors du dessin pattern files (*.pat) - pattern files (*.pat) + fichiers de motif (*.pat) PAT file: - PAT file: + Fichier PAT: @@ -3864,7 +3869,7 @@ en utilisant les touches [ et ] lors du dessin Pattern: - Pattern: + Motif: @@ -5295,7 +5300,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon Did not find enough coordinates - Did not find enough coordinates + Pas assez de coordonnées @@ -5327,7 +5332,7 @@ Remarque : l’exportateur C++ est plus rapide, mais n'est pas encore aussi fon Workbench - + Draft Snap Aimantation Draft @@ -6403,17 +6408,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Sélectionner le contenu du calque - + custom personnalisé - + Unable to convert input into a scale factor Impossible de convertir l'entrée en un facteur d'échelle - + Set custom annotation scale in format x:x, x=x Définir l'échelle d'annotation personnalisée au format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index 587ba7977e..6390b1c603 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index b4840c5338..016c8955a2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ dende menú de Ferramentas -> Xestión de complementos Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2987,12 +2992,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5342,7 +5347,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6423,17 +6428,17 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index 36ac00dad7..e2a266bbb5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index f203a025c2..052f7917d7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -962,7 +962,7 @@ izvan mjerne linije Prikazuje mjernu liniju i strelice - + If it is true, the objects contained within this layer will adopt the line color of the layer Ako je označeno, objekti unutar ovog sloja će pokupiti boju linija sloja @@ -1164,6 +1164,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1523,27 +1528,27 @@ iz izbornika Alati-> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -3016,12 +3021,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5409,7 +5414,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6494,17 +6499,17 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Select layer contents - + custom prilagođeno - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 30b1c91edf..d594607dda 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index adc2eade46..af683de380 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -961,7 +961,7 @@ a méretvonalon túl A dimenzióvonal és a nyilak megjelenítve - + If it is true, the objects contained within this layer will adopt the line color of the layer Ha igaz, a réteg tárgyai öröklik a réteg vonalszínét @@ -1136,32 +1136,37 @@ Használja az 'arch' kifejezést amerikai US arch jelölésének kikényszerít The base object used by this object - The base object used by this object + A tárgy által használt elsődleges tárgy The PAT file used by this object - The PAT file used by this object + A tárgy által használt PAT-fájl The pattern name used by this object - The pattern name used by this object + A tárgy által használt mintanév The pattern scale used by this object - The pattern scale used by this object + A tárgy által használt minta lépték The pattern rotation used by this object - The pattern rotation used by this object + A tárgy által használt minta elforgatás If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Ha hamisra állított, a kitöltés a felületekhez hasonlóan, fordítás nélkül kerül alkalmazásra (ez rossz eredményeket adhat a nem XY felületek esetében) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1504,27 +1509,27 @@ kézzel az Eszközök -> Kiegészítő kezelő menüből Új réteg hozzáadása - + Toggles Grid On/Off Rács be-/kikapcsolása - + Object snapping Tárgy illesztés - + Toggles Visual Aid Dimensions On/Off A vizuális segédméretek be- és kikapcsolása - + Toggles Ortho On/Off Merőleges be- és kikapcsolása - + Toggles Constrain to Working Plane On/Off Be- és kikapcsolja a kényszerítést a munkasíkra @@ -1714,7 +1719,7 @@ Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megv You must choose a base object before using this command - You must choose a base object before using this command + A parancs használata előtt ki kell választania egy elsődleges tárgyat @@ -2535,7 +2540,7 @@ Ha más tárgyak vannak kijelölve, a program figyelmen kívül hagyja őket. Create hatches on selected faces - Create hatches on selected faces + Nyílások létrehozása a kijelölt felületeken @@ -2983,12 +2988,12 @@ egyenes piszkozatvonalak működik jól. A program figyelmen kívül hagyja a ne Draft_Snap - + Toggles Grid On/Off Rács be-/kikapcsolása - + Toggle Draft Grid Tervrajz rácsok kapcsolása @@ -3857,12 +3862,12 @@ módosíthatja rajzolás közben pattern files (*.pat) - pattern files (*.pat) + minta fájlok (*.pat) PAT file: - PAT file: + PAT fájl: @@ -3872,7 +3877,7 @@ módosíthatja rajzolás közben Pattern: - Pattern: + Minta: @@ -5308,7 +5313,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionális Did not find enough coordinates - Did not find enough coordinates + Nem találtam elég koordinátát @@ -5340,7 +5345,7 @@ Megjegyzés: A C++ exportőr gyorsabb, de még nem olyan funkcionális Workbench - + Draft Snap Tervrajz illesztése @@ -6423,17 +6428,17 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Réteg tartalom kijelölése - + custom egyéni - + Unable to convert input into a scale factor Nem lehet a bemenetet léptéktényezővé alakítani - + Set custom annotation scale in format x:x, x=x Egyéni jegyzetméret beállítása x:x, x=x formátumban diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index b996975d19..4d85b6dcc2 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index e35764da80..c986a6103f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1504,27 +1509,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2985,12 +2990,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5340,7 +5345,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6418,17 +6423,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 6bb81a52e6..2fb8a61e8f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 29d5c8d141..14ce1717db 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -953,7 +953,7 @@ beyond the dimension line Mostra la linea di quotatura e le frecce - + If it is true, the objects contained within this layer will adopt the line color of the layer Se è vero, gli oggetti contenuti all'interno di questo livello adotteranno il colore della linee del livello @@ -1127,32 +1127,37 @@ Usare 'arch' per forzare la notazione dell'arco statunitense The base object used by this object - The base object used by this object + L'oggetto base usato da questo oggetto The PAT file used by this object - The PAT file used by this object + Il file PAT usato da questo oggetto The pattern name used by this object - The pattern name used by this object + Il nome del motivo usato da questo oggetto The pattern scale used by this object - The pattern scale used by this object + La scala del motivo usata da questo oggetto The pattern rotation used by this object - The pattern rotation used by this object + La rotazione del motivo usata da questo oggetto If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Se impostato su False, il tratteggio viene applicato come per le facce, senza traslazione (questo potrebbe dare risultati errati per le facce non-XY) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1495,27 +1500,27 @@ dal menu Strumenti -> Addon Manager Aggiungi un nuovo livello - + Toggles Grid On/Off Accendi/Spegni la griglia - + Object snapping Attiva lo snap - + Toggles Visual Aid Dimensions On/Off Attiva/Disattiva lo strumento di supporto visivo per le quotature - + Toggles Ortho On/Off Attiva/Disattiva Orto - + Toggles Constrain to Working Plane On/Off Attiva/Disattiva i vincoli al Piano di Lavoro @@ -1705,7 +1710,7 @@ La Serie può essere trasformata in una serie polare o circolare cambiandone il You must choose a base object before using this command - You must choose a base object before using this command + Devi scegliere un oggetto base prima di usare questo comando @@ -2526,7 +2531,7 @@ Se sono selezionati altri oggetti, verranno ignorati. Create hatches on selected faces - Create hatches on selected faces + Crea tratteggi sulle facce selezionate @@ -2975,12 +2980,12 @@ linee di Draft dritte che vengono disegnate nel piano XY. Gli oggetti selezionat Draft_Snap - + Toggles Grid On/Off Accendi/Spegni la griglia - + Toggle Draft Grid Attiva/Disattiva la griglia Draft @@ -3850,12 +3855,12 @@ utilizzando i tasti [ e ] durante il disegno pattern files (*.pat) - pattern files (*.pat) + file modello (*.pat) PAT file: - PAT file: + File PAT: @@ -3865,7 +3870,7 @@ utilizzando i tasti [ e ] durante il disegno Pattern: - Pattern: + Motivo: @@ -5299,7 +5304,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< Did not find enough coordinates - Did not find enough coordinates + Le coordinate non sono sufficienti @@ -5331,7 +5336,7 @@ Nota: l'importatore C++ è più veloce, ma non è ancora altrettanto funzionale< Workbench - + Draft Snap Draft Snap @@ -6411,17 +6416,17 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Seleziona il contenuto del layer - + custom personalizzato - + Unable to convert input into a scale factor Impossibile convertire l'input in un fattore di scala - + Set custom annotation scale in format x:x, x=x Imposta scala di annotazione personalizzata nel formato x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 1d4ecbb665..077b77fe6c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 55d0f3275d..9ea4380a51 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -946,7 +946,7 @@ beyond the dimension line 寸法線と矢印を表示 - + If it is true, the objects contained within this layer will adopt the line color of the layer Trueの場合、このレイヤーに含まれるオブジェクトにはレイヤーの線の色が適用されます。 @@ -1121,32 +1121,37 @@ Use 'arch' to force US arch notation The base object used by this object - The base object used by this object + このオブジェクトで使用されているベースオブジェクト The PAT file used by this object - The PAT file used by this object + このオブジェクトで使用されるPATファイル The pattern name used by this object - The pattern name used by this object + このオブジェクトで使用されているパターン名 The pattern scale used by this object - The pattern scale used by this object + このオブジェクトで使用されるパターンスケール The pattern rotation used by this object - The pattern rotation used by this object + このオブジェクトで使用されるパターンの回転 If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + False に設定すると、ハッチは平行移動せずにそのまま面に適用されます (非XY面では間違った結果になる可能性があります)。 + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1488,27 +1493,27 @@ from menu Tools -> Addon Manager 新しいレイヤーの追加 - + Toggles Grid On/Off グリッドのオン/オフを切り替え - + Object snapping オブジェクトスナップ - + Toggles Visual Aid Dimensions On/Off 表示補助寸法のオン/オフを切り替え - + Toggles Ortho On/Off 矩形のオン/オフを切り替え - + Toggles Constrain to Working Plane On/Off 作業平面への拘束のオン/オフを切り替え @@ -1696,7 +1701,7 @@ X、Y、Zの軸の指定方向にコピーを並べます。 You must choose a base object before using this command - You must choose a base object before using this command + このコマンドを使用する前にベースオブジェクトを選択する必要があります @@ -2513,7 +2518,7 @@ If other objects are selected they are ignored. Create hatches on selected faces - Create hatches on selected faces + 選択した面にハッチングを作成 @@ -2959,12 +2964,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off グリッドのオン/オフを切り替え - + Toggle Draft Grid ドラフトグリッドの切り替え @@ -3824,12 +3829,12 @@ value by using the [ and ] keys while drawing pattern files (*.pat) - pattern files (*.pat) + パターンファイル (*.pat) PAT file: - PAT file: + PATファイル: @@ -3839,7 +3844,7 @@ value by using the [ and ] keys while drawing Pattern: - Pattern: + パターン: @@ -5265,7 +5270,7 @@ Note: C++ exporter is faster, but is not as featureful yet Did not find enough coordinates - Did not find enough coordinates + 十分な座標が見つかりませんでした @@ -5297,7 +5302,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap ドラフトスナップ @@ -6380,17 +6385,17 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた レイヤーの内容を選択 - + custom カスタム - + Unable to convert input into a scale factor 入力値を拡大縮小率に変換できません - + Set custom annotation scale in format x:x, x=x x:x、x=x形式でカスタム注釈拡大縮小率を設定 diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm index db04b22e4c..508920a7df 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index 08c8204637..baaabc86b8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1505,27 +1510,27 @@ Prašome įdiegti dxf bibliotekos plėtinį rankiniu būdu meniu (Įrankiai -> Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2986,12 +2991,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5344,7 +5349,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6427,17 +6432,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index c4acc51fb1..d2a8cdc290 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 510523304c..cfe3a6a1bd 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -960,7 +960,7 @@ buiten de maatlijn Toont de dimensie lijn en pijlen - + If it is true, the objects contained within this layer will adopt the line color of the layer Als het waar is, zullen de objecten die in deze laag zitten de lijnkleur van de laag aannemen @@ -1162,6 +1162,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1503,27 +1508,27 @@ vanuit het menu Tools -> Addon Manager Nieuwe laag toevoegen - + Toggles Grid On/Off Schakelt raster aan/uit - + Object snapping Object uitlijnen - + Toggles Visual Aid Dimensions On/Off Schakelt de Visuele Hulp Dimensies Aan/Uit - + Toggles Ortho On/Off Schakelt Ortho Aan/Uit - + Toggles Constrain to Working Plane On/Off Schakelt beperkingen aan naar werkvlak aan/uit @@ -2983,12 +2988,12 @@ rechte ontwerplijnen die in het XY-vlak worden getrokken. Geselecteerde objecten Draft_Snap - + Toggles Grid On/Off Schakelt raster aan/uit - + Toggle Draft Grid Concept raster in-/uitschakelen @@ -5337,7 +5342,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Uitlijning @@ -6420,17 +6425,17 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Selecteer inhoud laag - + custom eigen - + Unable to convert input into a scale factor Kan input niet omzetten naar een schaalfactor - + Set custom annotation scale in format x:x, x=x Aangepaste aantekening schaal in formaat x:x, x=x instellen diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index f021557399..f28004179f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 49aaddb9b4..3e5fee2e87 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -108,7 +108,7 @@ Pozostaw tę właściwość pustą, aby móc ustawić " Oś" i "Środek" ręczni Angle to cover with copies - Kąt do pokrycia kopiami + Rozpiętość kąta do pokrycia kopiami @@ -785,7 +785,7 @@ W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginaln An optional offset value to be applied to all faces - Opcjonalna wartość przesunięcia, która zostanie zastosowana do wszystkich ścian + Opcjonalna wartość odsunięcia, która ma być zastosowana do wszystkich ścian @@ -800,7 +800,7 @@ W przeciwnym razie duplikaty będą miały taką samą orientację jak oryginaln The objects included in this clone - Obiekty są zawarte w tej kopii + Obiekty zawarte w tym klonie @@ -959,7 +959,7 @@ beyond the dimension line Pokazuj linie wymiarowe i strzałki - + If it is true, the objects contained within this layer will adopt the line color of the layer Jeśli parametr ma wartość Prawda, obiekty zawarte w tej warstwie przyjmą kolor linii warstwy @@ -1134,32 +1134,37 @@ Użyj "arch", aby wymusić notację architektoniczną amerykańską The base object used by this object - The base object used by this object + Obiekt podstawowy używany przez ten obiekt The PAT file used by this object - The PAT file used by this object + Plik PAT używany przez ten obiekt The pattern name used by this object - The pattern name used by this object + Nazwa wzoru używana przez ten obiekt The pattern scale used by this object - The pattern scale used by this object + Skala wzoru używana przez ten obiekt The pattern rotation used by this object - The pattern rotation used by this object + Obrót wzoru używanego przez ten obiekt If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Jeśli wartość ta jest ustawiona na Fałsz, kreskowanie jest stosowane do powierzchni w takiej postaci, w jakiej jest, bez przesunięcia (może to prowadzić do błędnych wyników dla powierzchni innych niż XY) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1502,27 +1507,27 @@ z menu Przybory -> Menedżer dodatków Dodaj nową warstwę - + Toggles Grid On/Off Włącz / wyłącz wyświetlanie siatki - + Object snapping Przyciąganie obiektu - + Toggles Visual Aid Dimensions On/Off Włącz / wyłącz wizualną pomoc dla wymiarów - + Toggles Ortho On/Off Włącz / wyłącz tryb ortogonalny - + Toggles Constrain to Working Plane On/Off Włącz / wyłącz wiązanie do płaszczyzny roboczej @@ -1682,7 +1687,7 @@ Tablicę można przekształcić w tablicę polarną lub okrągłą, zmieniając Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - Kierunek przesunięcia nie jest zdefiniowany. Proszę najpierw przesunąć kursor myszki po obu stronach obiektu, aby wskazać kierunek + Kierunek odsunięcia nie jest zdefiniowany. Przesuń kursor myszki do wewnątrz lub na zewnątrz obiektu, aby wskazać kierunek @@ -1712,7 +1717,7 @@ Tablicę można przekształcić w tablicę polarną lub okrągłą, zmieniając You must choose a base object before using this command - You must choose a base object before using this command + Musisz wybrać obiekt bazowy przed użyciem tej komendy @@ -2304,7 +2309,7 @@ CTRL, aby przyciągnąć, SHIFT, aby ograniczyć. Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. Tworzy okrąg (pełny okrągły łuk). -CTRL, aby przyciągnąć, ALT, aby wybrać styczny obiekt. +CTRL aby przyciągnąć, ALT aby wybrać styczny obiekt. @@ -2532,7 +2537,7 @@ Jeśli wybrane są inne obiekty, to zostaną one ignorowane. Create hatches on selected faces - Create hatches on selected faces + Utwórz kreskowanie na wybranych ścianach @@ -2983,12 +2988,12 @@ prostych linii projektowych, które są rysowane w płaszczyźnie XY. Wybrane ob Draft_Snap - + Toggles Grid On/Off Włącz / wyłącz wyświetlanie siatki - + Toggle Draft Grid Przełącz siatkę szkicu @@ -3289,7 +3294,7 @@ To może być użyte do rysowania kilku obiektów jeden po drugim. Toggle normal/wireframe display - Przełącz wyświetlanie normalne / szkielet + Przełącz wyświetlanie normalne / model krawędziowy @@ -3859,12 +3864,12 @@ używając klawisza [ i ] podczas rysowania pattern files (*.pat) - pattern files (*.pat) + pliki wzorów (*.pat) PAT file: - PAT file: + Plik w formacie PAT: @@ -3874,7 +3879,7 @@ używając klawisza [ i ] podczas rysowania Pattern: - Pattern: + Wzór: @@ -4030,7 +4035,7 @@ lub rodziny, jak np. "Arial, Helvetica, sans" lub nazwa w stylu np. "Arial: Bold Alternate SVG Patterns location - Alternatywna lokalizcja wzorców SVG + Alternatywna lokalizacja wzorów SVG @@ -5310,7 +5315,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalny Did not find enough coordinates - Did not find enough coordinates + Za mało współrzędnych @@ -5342,7 +5347,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalny Workbench - + Draft Snap Rysunek Roboczy - przyciąganie @@ -6265,7 +6270,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wrong input: must be 'Original', 'Frenet', or 'Tangent'. - Nieprawidłowe dane wejściowe: musi to być 'oryginalny', 'swobodny' lub 'styczny'. + Nieprawidłowe dane wejściowe: musi to być "oryginalny", "swobodny" lub "styczny". @@ -6424,17 +6429,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz zawartość warstwy - + custom niestandardowe - + Unable to convert input into a scale factor Nie można przekonwertować danych wejściowych do współczynnika skali - + Set custom annotation scale in format x:x, x=x Ustaw niestandardową skalę dla adnotacji w formacie x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 92be7dc67b..ac498c234c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 6bb4655d7f..4806b03280 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -957,7 +957,7 @@ beyond the dimension line Exibe a linha de cota e as setas - + If it is true, the objects contained within this layer will adopt the line color of the layer Se verdadeiro, os objetos contidos nesta camada adotarão a cor de linha da camada @@ -1159,6 +1159,11 @@ Use 'arch' para forçar a notação de arco dos EUA If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1500,27 +1505,27 @@ no menu ferramentas-> Addon Manager Adicionar nova camada - + Toggles Grid On/Off Liga/desliga grade - + Object snapping Snap de objetos - + Toggles Visual Aid Dimensions On/Off Liga/desliga dimensões de ajuda - + Toggles Ortho On/Off Ligar/desligar modo ortho - + Toggles Constrain to Working Plane On/Off Liga/desliga restrição de plano de trabalho @@ -2976,12 +2981,12 @@ linhas retas desenhadas no plano XY. Objetos selecionados que não sejam linhas Draft_Snap - + Toggles Grid On/Off Liga/desliga grade - + Toggle Draft Grid Ligar/desligar grade @@ -5327,7 +5332,7 @@ Nota: O exportador C++ é mais rápido, mas não tem muitos recursos ainda Workbench - + Draft Snap Snap @@ -6409,17 +6414,17 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Selecionar conteúdo da camada - + custom personalizado - + Unable to convert input into a scale factor Não é possível converter a entrada em um fator de escala - + Set custom annotation scale in format x:x, x=x Definir escala personalizada de anotação no formato x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index 9304767268..a1fc7edff8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 43fde88738..0f2ebfc9b8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -960,7 +960,7 @@ além da linha de cota Mostra a linha de cotagem e as setas - + If it is true, the objects contained within this layer will adopt the line color of the layer Se for verdade, os objetos contidos nesta camada adotarão a cor da linha da camada @@ -1162,6 +1162,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1501,27 +1506,27 @@ from menu Tools -> Addon Manager Adicionar nova camada - + Toggles Grid On/Off Liga/Desliga Grelha - + Object snapping Alinhamento e atração do Objeto - + Toggles Visual Aid Dimensions On/Off Liga/desliga Dimensões de Auxílio Visual - + Toggles Ortho On/Off Ligar/desligar Ortogonal - + Toggles Constrain to Working Plane On/Off Liga/desliga restringir ao plano de trabalho @@ -2981,12 +2986,12 @@ linhas retas desenhadas no plano XY. Objetos selecionados que não sejam linhas Draft_Snap - + Toggles Grid On/Off Liga/Desliga Grelha - + Toggle Draft Grid Alternar grelha de rascunho @@ -5334,7 +5339,7 @@ Nota: O exportador C++ é mais rápido, mas ainda não é tão completo Workbench - + Draft Snap Draft Snap @@ -6413,17 +6418,17 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Select layer contents - + custom personalizado - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index b2f482a4d7..4a1fc6f266 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 97b536f1c4..2f4bbf502a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -961,7 +961,7 @@ dincolo de linia de cotă Afișează linia de cotă și extremitățile - + If it is true, the objects contained within this layer will adopt the line color of the layer Dacă este adevărat, obiectele conținute în acest strat vor adopta culoarea de linie a stratului @@ -1163,6 +1163,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1502,27 +1507,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2983,12 +2988,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5340,7 +5345,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6416,17 +6421,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom personalizat - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 1ece1fe715..2dff117a85 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index a97e8fede6..8dbe69f134 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -956,7 +956,7 @@ beyond the dimension line Отображать размерную линию и стрелки - + If it is true, the objects contained within this layer will adopt the line color of the layer Если истина, объекты данного слоя будут иметь цвет линий слоя @@ -1130,12 +1130,12 @@ Use 'arch' to force US arch notation The base object used by this object - The base object used by this object + Базовый объект, используется данным объектом The PAT file used by this object - The PAT file used by this object + PAT-файл, используется данным объектом @@ -1157,6 +1157,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1496,27 +1501,27 @@ from menu Tools -> Addon Manager Добавить новый слой - + Toggles Grid On/Off Вкл/выкл Сетку - + Object snapping Привязка к объекту - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off - Toggles Ortho On/Off + Вкл/выкл ортографический вид - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -1661,7 +1666,7 @@ The array can be turned into a polar or a circular array by changing its type. Creates a fillet between two selected wires or edges. - Creates a fillet between two selected wires or edges. + Создаёт скругление между двумя ломанными или рёбрами. @@ -2973,12 +2978,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Вкл/выкл Сетку - + Toggle Draft Grid Вкл/выкл сетку Draft @@ -3992,7 +3997,7 @@ such as "Arial:Bold" General settings - Общие настройки + Основные настройки @@ -5266,7 +5271,7 @@ This value is the maximum segment length. G - G + G @@ -5313,7 +5318,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6076,7 +6081,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Radius is too large - Radius is too large + Радиус слишком большой @@ -6395,17 +6400,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select layer contents - + custom произвольный, пользовательский - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Задать произвольный масштаб заметки в формате x:x, x=x @@ -7242,12 +7247,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Fillet radius - Fillet radius + Радиус скругления Radius of fillet - Radius of fillet + Радиус скругления @@ -7262,12 +7267,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Chamfer mode: - Chamfer mode: + Тип фаски: Two elements needed. - Two elements needed. + Необходимы два элемента. diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index d5c6476dea..3e2665f0f4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index b2f0c43330..8f0ff52deb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -958,7 +958,7 @@ preko kotnice Prikaže kotnico in puščice - + If it is true, the objects contained within this layer will adopt the line color of the layer Če drži, bodo predmeti znotraj te plasti prevzeli črtno barvo plasti @@ -1133,32 +1133,37 @@ Use 'arch' to force US arch notation The base object used by this object - The base object used by this object + Izhodiščni predmet tega predmeta The PAT file used by this object - The PAT file used by this object + Datoteka PAT, ki jo uporablja ta predmet The pattern name used by this object - The pattern name used by this object + Ime vzorca, ki ga uporablja ta predmet The pattern scale used by this object - The pattern scale used by this object + Merilo vzorca, ki ga uporablja ta predmet The pattern rotation used by this object - The pattern rotation used by this object + Zasuk vzorca, ki ga uporablja ta predmet If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Če je nastavljeno na "Napak", se črtkanje izvede, kakršno je, ne da bi bilo premaknjeno (na ploskvah, ki so izven XY, lahko to privede do napačnega izida + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1501,27 +1506,27 @@ iz menija Orodja -> Upravljalnik vstavkov Dodaj novo plast - + Toggles Grid On/Off Preklopi med vklopom/izklopom mreže - + Object snapping Pripenjanje predmeta - + Toggles Visual Aid Dimensions On/Off Preklaplja med vklopljenostjo in izklopljenostjo kót za vidno pomoč - + Toggles Ortho On/Off Preklopi med Vklop/Izklop pravokotnosti - + Toggles Constrain to Working Plane On/Off Preklopi omejitve na delovno ravnino Vklop / Izklop @@ -1710,7 +1715,7 @@ Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s sprememb You must choose a base object before using this command - You must choose a base object before using this command + Pred tem ukazom morate izbrati izhodiščni predmet @@ -2530,7 +2535,7 @@ If other objects are selected they are ignored. Create hatches on selected faces - Create hatches on selected faces + Na izbranih ploskvah ustvari črtkanje @@ -2978,12 +2983,12 @@ Izbrani predmeti, ki niso posamezne črte, bodo prezrti. Draft_Snap - + Toggles Grid On/Off Preklopi med vklopom/izklopom mreže - + Toggle Draft Grid Preklopi mrežo osnutka @@ -3853,12 +3858,12 @@ risanjem spremenite s tipkama [ in ] pattern files (*.pat) - pattern files (*.pat) + datoteke vzorcev (*.pat) PAT file: - PAT file: + Datoteka PAT: @@ -3868,7 +3873,7 @@ risanjem spremenite s tipkama [ in ] Pattern: - Pattern: + Vzorec: @@ -5304,7 +5309,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnosti Did not find enough coordinates - Did not find enough coordinates + Ni mogoče najti dovolj sorednic @@ -5336,7 +5341,7 @@ Opozorilo: C++ izvozilnik je hitrejši, vendar nima še toliko zmožnosti Workbench - + Draft Snap Pripenjanje v osnutku @@ -6419,17 +6424,17 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Izberite vsebino plasti - + custom po meri - + Unable to convert input into a scale factor Vnešenega ni mogoče pretvoriti v količnik velikosti - + Set custom annotation scale in format x:x, x=x Nastavi velikost pripisov po meri kot x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 97ab7aeb34..467478a55f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 04df175a03..0f9892faf2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -958,7 +958,7 @@ beyond the dimension line Visar måttsättningslinjen och pilarna - + If it is true, the objects contained within this layer will adopt the line color of the layer Om det är sant, så kommer de objekt som ingår i detta lager anta lagrets linjefärg @@ -1160,6 +1160,11 @@ Använd 'arch' för att påtvinga US arch-notering If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1501,27 +1506,27 @@ menyverktyg -> Insticksmodulshanterare Lägg till nytt lager - + Toggles Grid On/Off Växlar rutnät på/av - + Object snapping Objekt snäpp - + Toggles Visual Aid Dimensions On/Off Växlar Visuella hjälpdimensioner På/Av - + Toggles Ortho On/Off Växlar Ortho på/av - + Toggles Constrain to Working Plane On/Off Växlar Begränsning till arbetsplan på/av @@ -2976,12 +2981,12 @@ raka Draft linjer som är ritade i XY-planet. Valda objekt som inte är enstaka Draft_Snap - + Toggles Grid On/Off Växlar rutnät på/av - + Toggle Draft Grid Växla Draft rutnät @@ -5324,7 +5329,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snäpp @@ -6408,17 +6413,17 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Markera lagrets innehåll - + custom anpassad - + Unable to convert input into a scale factor Det går inte att konvertera inmatningen till en skalfaktor - + Set custom annotation scale in format x:x, x=x Ange egen annotationsskala i formatet x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index bc9a5fb940..01749ea3bf 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index 77dbd55ae3..b16f2ed810 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -959,7 +959,7 @@ dışındaki mesafesi Ölçülendirme çizgisi ve okları gösterir - + If it is true, the objects contained within this layer will adopt the line color of the layer Doğruysa, bu katmanda bulunan nesneler katmanın çizgi rengini alacaktır @@ -1161,6 +1161,11 @@ BM mimari gösterimi için 'mimari' yi kullanın If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1502,27 +1507,27 @@ menüden Araçlar -> Eklenti Yöneticisi Yeni Katman Ekle - + Toggles Grid On/Off Izgara görünümünü Aç/Kapat - + Object snapping Nesne Yakalama - + Toggles Visual Aid Dimensions On/Off Görsel Yardım Ölçülerini Açar / Kapatır - + Toggles Ortho On/Off Izgara görünümünü Aç/Kapat - + Toggles Constrain to Working Plane On/Off Çalışma Düzlemine Kısıtlamayı Açma / Kapatma @@ -2981,12 +2986,12 @@ XY düzleminde çizilen düz Draft çizgileri. Tek satır olmayan seçili nesnel Draft_Snap - + Toggles Grid On/Off Izgara görünümünü Aç/Kapat - + Toggle Draft Grid Taslak Izgarasını Aç/Kapat @@ -5335,7 +5340,7 @@ Not: C ++ içe aktarıcı daha hızlıdır, ancak henüz o kadar özellikli değ Workbench - + Draft Snap Taslak Yakala @@ -6418,17 +6423,17 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Katman içeriklerini seçin - + custom özel - + Unable to convert input into a scale factor Giriş ölçek faktörüne dönüştürülemiyor - + Set custom annotation scale in format x:x, x=x Özel açıklama ölçeğini x: x, x = x biçiminde ayarlayın diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index fd57e223a5..65235b852f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index a1623688ca..fa10085f2f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -960,7 +960,7 @@ beyond the dimension line Показує розмірну лінію та стрілки - + If it is true, the objects contained within this layer will adopt the line color of the layer Якщо це обрано, об'єкту, що містяться в цьому шарі, матимуть кольори ліній цього шару @@ -1134,32 +1134,37 @@ Use 'arch' to force US arch notation The base object used by this object - The base object used by this object + Базовий об'єкт використовується цим об’єктом The PAT file used by this object - The PAT file used by this object + Файл PAT, який використовується цим об’єктом The pattern name used by this object - The pattern name used by this object + Назва шаблону, що використовується цим об'єктом The pattern scale used by this object - The pattern scale used by this object + Масштабований паттерн (повторюване зображення), який використовується цим об'єктом The pattern rotation used by this object - The pattern rotation used by this object + Масштабований паттерн (повторюване зображення), який використовується цим об'єктом If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + Якщо встановлено False, штрих застосовується як до поверхонь, без перекладу (це може призвести до неправильних результатів для поверхонь, відмінних від XY) + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer @@ -1502,27 +1507,27 @@ from menu Tools -> Addon Manager Додати новий шар - + Toggles Grid On/Off Увімкнути/вимкнути сітку - + Object snapping Прив'язка до об'єктів - + Toggles Visual Aid Dimensions On/Off Вмикати розміри видимої пропозиції - + Toggles Ortho On/Off Вкл./викл Орто - + Toggles Constrain to Working Plane On/Off Перемикає обмеження в робочій площині Вкл/Викл @@ -1712,7 +1717,7 @@ The array can be turned into a polar or a circular array by changing its type. You must choose a base object before using this command - You must choose a base object before using this command + Вам слід вибрати базовий об'єкт перед використанням цієї команди @@ -2534,7 +2539,7 @@ If other objects are selected they are ignored. Create hatches on selected faces - Create hatches on selected faces + Створити штрихування на вибраних поверхнях @@ -2748,8 +2753,8 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. - Like the PathTwistedArray tool, but creates a 'Link array' instead. -A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. + Як і інструмент PathTwistedArray але замість нього створює масив посилань. +При обробці багатьох копій «посилання більш ефективний, але не вдалося використати параметр «Fuse». @@ -2762,7 +2767,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Creates a point object. Click anywhere on the 3D view. - Creates a point object. Click anywhere on the 3D view. + Створює об'єкт точки. Натисніть будь-де на 3D-перегляді. @@ -2770,7 +2775,7 @@ A 'Link array' is more efficient when handling many copies but the 'Fuse' option Point array - Point array + Масив точок @@ -2781,13 +2786,13 @@ To create this compound, select various points and then use the Part Compound to or use the Draft Upgrade tool to create a 'Block', or create a Sketch and add simple points to it. Select the base object, and then select the compound or the sketch to create the point array. - Creates copies of the selected object, and places the copies at the position of various points. + Створює копії вибраного об'єкту та розміщує копії на позиції різних точок. -The points need to be grouped under a compound of points before using this tool. -To create this compound, select various points and then use the Part Compound tool, -or use the Draft Upgrade tool to create a 'Block', or create a Sketch and add simple points to it. +Точки мають бути згруповані під накопиченням точок перед цим інструментом. +Щоб створити цей компас, виберіть різні точки, а потім скористайтеся інструментом частини - сполученого, +або скористайтеся інструментом Покращення Draft для створення 'Block', або створення ескізу і додавання простих балів до нього. -Select the base object, and then select the compound or the sketch to create the point array. +Виберіть основний об'єкт, а потім виберіть склад або ескіз, щоб створити масив точок. @@ -2795,7 +2800,7 @@ Select the base object, and then select the compound or the sketch to create the PointLinkArray - PointLinkArray + Артикул @@ -2983,12 +2988,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Увімкнути/вимкнути сітку - + Toggle Draft Grid Toggle Draft Grid @@ -3858,12 +3863,12 @@ value by using the [ and ] keys while drawing pattern files (*.pat) - pattern files (*.pat) + файли шаблонів (*.pat) PAT file: - PAT file: + PAT-файл: @@ -3873,7 +3878,7 @@ value by using the [ and ] keys while drawing Pattern: - Pattern: + Шаблон: @@ -5341,7 +5346,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6424,17 +6429,17 @@ To enabled FreeCAD to download these libraries, answer Yes. Select layer contents - + custom На замовлення - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x @@ -6796,7 +6801,7 @@ To enabled FreeCAD to download these libraries, answer Yes. Point array - Point array + Масив точок diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index d36247c945..b052c5f246 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 671e6cbfbc..47b6b8e8ee 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -6,27 +6,27 @@ The start point of this line. - The start point of this line. + El punt d'inici d'esta línia. The end point of this line. - The end point of this line. + El punt final d'esta línia. The length of this line. - The length of this line. + La longitud d'esta línia. Radius to use to fillet the corner. - Radius to use to fillet the corner. + Radi a utilitzar per a arredonir el cantó. The base object that will be duplicated - The base object that will be duplicated + El objecte base que s'ha de duplicar @@ -34,118 +34,118 @@ - Ortho: places the copies in the direction of the global X, Y, Z axes. - Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. - Circular: places the copies in concentric circular layers around the base object. - The type of array to create. -- Ortho: places the copies in the direction of the global X, Y, Z axes. -- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. -- Circular: places the copies in concentric circular layers around the base object. + El tipus de matriu a crear. +- Orto: posa les copies en la direcció dels eixos globals X, Y, Z. +- Polar: posa les copies al voltant d'un arc circular, fins un angle especificat i amb una certa orientació definida per un centre i un eix. +- Circular: posa les copies en capes circulars concèntriques al voltant de l'objecte base. Specifies if the copies should be fused together if they touch each other (slower) - Specifies if the copies should be fused together if they touch each other (slower) + Especifica si les còpies haurien d'estar fusionades entre elles si es toquen (més lent) Number of copies in X direction - Number of copies in X direction + Nombre de còpies en la direcció X Number of copies in Y direction - Number of copies in Y direction + Nombre de còpies en la direcció Y Number of copies in Z direction - Number of copies in Z direction + Nombre de còpies en la direcció Z Distance and orientation of intervals in X direction - Distance and orientation of intervals in X direction + Distància i orientació d'intervals en la direcció X Distance and orientation of intervals in Y direction - Distance and orientation of intervals in Y direction + Distància i orientació d'intervals en la direcció Y Distance and orientation of intervals in Z direction - Distance and orientation of intervals in Z direction + Distància i orientació d'intervals en la direcció Z The axis direction around which the elements in a polar or a circular array will be created - The axis direction around which the elements in a polar or a circular array will be created + La direcció de l'eix al voltant del qual els elements en una matriu polar o circular seràn creats Center point for polar and circular arrays. The 'Axis' passes through this point. - Center point for polar and circular arrays. -The 'Axis' passes through this point. + Punt central per a matrius circulars i polars. +L'eix passa per este punt. The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. Its placement, position and rotation, will be used when creating polar and circular arrays. Leave this property empty to be able to set 'Axis' and 'Center' manually. - The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. -Its placement, position and rotation, will be used when creating polar and circular arrays. -Leave this property empty to be able to set 'Axis' and 'Center' manually. + L'objecte eix que sobreescriu el valor de "Eix" i "Centre". Per example: una línia de referència (datum). +La seua ubicació, posició i rotació serà utilitzada quan es creen les matrius polars i circulars. +Deixa esta propietat buida per a introduir les dades de "Eix" i "Centre" manualment. Number of copies in the polar direction - Number of copies in the polar direction + Nombre de còpies en la direcció polar Distance and orientation of intervals in 'Axis' direction - Distance and orientation of intervals in 'Axis' direction + Distància i orientació d'intervals en la direcció de l'eix Angle to cover with copies - Angle to cover with copies + Angle per a cobrir amb còpies Distance between circular layers - Distance between circular layers + Distància entre les capes circulars Distance between copies in the same circular layer - Distance between copies in the same circular layer + Distància entre les còpies d'una mateixa capa circular Number of circular layers. The 'Base' object counts as one layer. - Number of circular layers. The 'Base' object counts as one layer. + Nombre de capes circulars. L'objecte "Base" compta com una capa. A parameter that determines how many symmetry planes the circular array will have. - A parameter that determines how many symmetry planes the circular array will have. + Un paràmetre que determina quants plànols simètrics tindrà la matriu circular. Total number of elements in the array. This property is read-only, as the number depends on the parameters of the array. - Total number of elements in the array. -This property is read-only, as the number depends on the parameters of the array. + Nombre total d'elements en la matriu. +Esta propietat es només de lectura, pel fet que este nombre depén dels paràmetres de la matriu. Show the individual array elements (only for Link arrays) - Show the individual array elements (only for Link arrays) + Mostra els elements individuals de la matriu (només per a matrius enllaçades) The components of this block - The components of this block + Els components d'este bloc @@ -155,52 +155,52 @@ This property is read-only, as the number depends on the parameters of the array Length of the rectangle - Length of the rectangle + Longitud del rectangle Height of the rectangle - Height of the rectangle + Altura del rectangle Radius to use to fillet the corners - Radius to use to fillet the corners + Radi a utilitzar per a arredonir els cantons Size of the chamfer to give to the corners - Size of the chamfer to give to the corners + Mida del xamfrà que cal donar als cantons Create a face - Create a face + Crea una cara Horizontal subdivisions of this rectangle - Horizontal subdivisions of this rectangle + Subdivisió horitzontal d'este rectangle Vertical subdivisions of this rectangle - Vertical subdivisions of this rectangle + Subdivisió vertical d'este rectangle The area of this object - The area of this object + L'àrea d'este objecte The normal direction of the text of the dimension - The normal direction of the text of the dimension + La direcció normal al text de la cota The object measured by this dimension object - The object measured by this dimension object + L'objecte mesurat per esta cota @@ -212,13 +212,13 @@ There are various possibilities: - An object, and two of its vertices. - An arc object, and its edge. - The object, and specific subelements of it, -that this dimension object is measuring. + L'objecte, i els subelements específics d'este, +que esta cota està mesurant. -There are various possibilities: -- An object, and one of its edges. -- An object, and two of its vertices. -- An arc object, and its edge. +Hi han vàries possibilitats: +- Un objecte, i una de les seves arestes. +- Un objecte, i dos dels seus vèrtexs. +- Un objecte arc, i la seua aresta. @@ -231,14 +231,14 @@ is to the measured object. that displays the measured radius or diameter. - For angular dimensions, this controls the radius of the dimension arc that displays the measured angle. - A point through which the dimension line, or an extrapolation of it, will pass. + Un punt per el que pasarà la línia de cota, o una extrapolaciò d'esta. -- For linear dimensions, this property controls how close the dimension line -is to the measured object. -- For radial dimensions, this controls the direction of the dimension line -that displays the measured radius or diameter. -- For angular dimensions, this controls the radius of the dimension arc -that displays the measured angle. +- Per a cotes lineals, esta propietat controla com de prop està la línia de +cota de l'objecte a mesurar. +- Per a cotes radials, esta propietat controla la direcció de la línia de cota +que mostra el radi o diàmetre mesurat. +- Per a cotes angulars, esta propietat controla el radi de la cota de l'arc +que mostra l'angle mesurat. @@ -246,10 +246,10 @@ that displays the measured angle. If it is a radius dimension it will be the center of the arc. If it is a diameter dimension it will be a point that lies on the arc. - Starting point of the dimension line. + Punt d'inici de la línia de cota. -If it is a radius dimension it will be the center of the arc. -If it is a diameter dimension it will be a point that lies on the arc. +Si es una cota de radi, serà el centre de l'arc. +Si es una cota de diàmetre, serà un punt que estiga contingut en l'arc. @@ -257,17 +257,16 @@ If it is a diameter dimension it will be a point that lies on the arc. - Ending point of the dimension line. - -If it is a radius or diameter dimension -it will be a point that lies on the arc. + Punt final de la línia de cota. +Si es una cota de radi o de diàmetre serà +un punt que està contingut en l'arc. The direction of the dimension line. If this remains '(0,0,0)', the direction will be calculated automatically. - The direction of the dimension line. -If this remains '(0,0,0)', the direction will be calculated automatically. + La direcció de la línia de cota. +Si es manté "(0,0,0)", la direcció serà calculada automàticament. @@ -278,34 +277,34 @@ from the 'Start' and 'End' properties. If the 'Linked Geometry' is an arc or circle, this 'Distance' is the radius or diameter, depending on the 'Diameter' property. - The value of the measurement. + El valor de la mida. -This property is read-only because the value is calculated -from the 'Start' and 'End' properties. +Esta propietat es només de lectura perquè el valor es calcula +des de les propietats de "Inici" i "Final". -If the 'Linked Geometry' is an arc or circle, this 'Distance' -is the radius or diameter, depending on the 'Diameter' property. +Si la "Geometria Enllaçada" es un arc o un cercle, esta "Distància" +es el radi o el diàmetre, depenent de la propietat "Diàmetre". When measuring circular arcs, it determines whether to display the radius or the diameter value - When measuring circular arcs, it determines whether to display -the radius or the diameter value + Quan es mesuren arcs circulars, determina si mostrar el +valor del radi o el diàmetre Starting angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Starting angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Angle d'inici de la cota lineal (arc circular). +L'arc es dibuixat en sentit contrari a les agulles del rellotge. Ending angle of the dimension line (circular arc). The arc is drawn counter-clockwise. - Ending angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. + Angle final de la cota lineal (arc circular). +L'arc es dibuixat en sentit contrari a les agulles del rellotge. @@ -313,10 +312,10 @@ The arc is drawn counter-clockwise. This is normally the point where two line segments, or their extensions intersect, resulting in the measured 'Angle' between them. - The center point of the dimension line, which is a circular arc. + El punt central de la cota lineal, que es un arc circular. -This is normally the point where two line segments, or their extensions -intersect, resulting in the measured 'Angle' between them. +Este sol ser el punt on els dos segments de línia, o les seues extensions, +intersecten, resultant en la mida de l'angle entre ells. @@ -324,27 +323,27 @@ intersect, resulting in the measured 'Angle' between them. This property is read-only because the value is calculated from the 'First Angle' and 'Last Angle' properties. - The value of the measurement. + El valor de la mida. -This property is read-only because the value is calculated from -the 'First Angle' and 'Last Angle' properties. +Esta propietat es només de lectura perquè el valor es calcula +des de les propietats de "Primer Angle" i "Angle Final". The placement of the base point of the first line - The placement of the base point of the first line + L'ubicació del punt base de la primera línia The text displayed by this object. It is a list of strings; each element in the list will be displayed in its own line. - The text displayed by this object. -It is a list of strings; each element in the list will be displayed in its own line. + El text mostrat per este objecte. +Si es una línia de sequències, cada element en la lista serà mostrat en la seua pròpia línia. Start angle of the arc - Start angle of the arc + Angle d'inici de l'arc @@ -690,17 +689,17 @@ This is useful to adjust for the difference between shape centre and shape refer Alignment vector for 'Tangent' mode - Alignment vector for 'Tangent' mode + Vector d'alineació per al mode "Tangent" Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode - Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode + Força utilitzada per el "Vector Vertical" com a direcció local Z quan s'utilitza el mode l'alineació "Original" o "Tangent" Direction of the local Z axis when 'Force Vertical' is true - Direction of the local Z axis when 'Force Vertical' is true + Direcció de l'eix local Z quan la "Força Vertical" es vertadera @@ -710,19 +709,19 @@ This is useful to adjust for the difference between shape centre and shape refer - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. - Method to orient the copies along the path. -- Original: X is curve tangent, Y is normal, and Z is the cross product. -- Frenet: aligns the object following the local coordinate system along the path. -- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. + Mètode per a orientar les còpies al llarg de la trajectòria. +- Original: X es tangent a la curva, Y es normal, i Z es el producte vectorial. +- Frenet: alinea l'objecte seguint el sistema local de coordenades al llarg de la trajectòria. +- Tangent: similar a "Original" però l'eix local X està pre-alineat al "Vector Tangent". -To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. +Per a obtindre millors resultats amb "Original" i "Tangent" vosté haurà de configurar la "Força Vertical" com vertadera. Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. - Orient the copies along the path depending on the 'Align Mode'. -Otherwise the copies will have the same orientation as the original Base object. + Orienta les còpies al llarg de la trajectòria depenent del "Mode d'Alineació". +En cas contrari les còpies tindràn la mateixa orientació de l'objecte Base. @@ -732,12 +731,12 @@ Otherwise the copies will have the same orientation as the original Base object. Projection direction - Projection direction + Direcció de la projecció The width of the lines inside this object - The width of the lines inside this object + L'amplària de les línies dins d'este objecte @@ -747,22 +746,22 @@ Otherwise the copies will have the same orientation as the original Base object. The spacing between lines of text - The spacing between lines of text + L'espaiat entre línies de text The color of the projected objects - The color of the projected objects + El color dels objectes projectats Shape Fill Style - Shape Fill Style + Estil de farciment de la forma Line Style - Line Style + Estil de línia @@ -772,112 +771,112 @@ Otherwise the copies will have the same orientation as the original Base object. Linked faces - Linked faces + Cares enllaçades Specifies if splitter lines must be removed - Specifies if splitter lines must be removed + Especifica si cal eliminar línies de separació An optional extrusion value to be applied to all faces - An optional extrusion value to be applied to all faces + Un valor opcional d'extrusió per a aplicar a totes les cares An optional offset value to be applied to all faces - An optional offset value to be applied to all faces + Un valor opcional de desplaçament per a aplicar a totes les cares This specifies if the shapes sew - This specifies if the shapes sew + Especifica si les formes es cusen The area of the faces of this Facebinder - The area of the faces of this Facebinder + L'àrea de les cares d'esta Col·lecció de Cares The objects included in this clone - The objects included in this clone + Els objectes inclosos en este clon The scale factor of this clone - The scale factor of this clone + El factor d'escala d'este clon If Clones includes several objects, set True for fusion or False for compound - If Clones includes several objects, -set True for fusion or False for compound + Si els Clons inclouen varios objectes, +configura Vertader per a fusionar o Fals per a compondre General scaling factor that affects the annotation consistently because it scales the text, and the line decorations, if any, in the same proportion. - General scaling factor that affects the annotation consistently -because it scales the text, and the line decorations, if any, -in the same proportion. + Factor d'escala general que afecta l'anotació uniformement +perquè escala el text, i les línies decoratives, si n'hi ha, +en la mateixa proporció. Annotation style to apply to this object. When using a saved style some of the view properties will become read-only; they will only be editable by changing the style through the 'Annotation style editor' tool. - Annotation style to apply to this object. -When using a saved style some of the view properties will become read-only; -they will only be editable by changing the style through the 'Annotation style editor' tool. + Estil d'anotació per a aplicar a este objecte. +Quan s'utilitza un estil guardat, algunes de les propietats de la vista es converteixen en sols per a lectura; +sols podràn ser editables canviant l'estil des de la ferramenta "Editor d'estil d'Anotació". The vertices of the wire - The vertices of the wire + Els vèrtexs del filferro If the wire is closed or not - If the wire is closed or not + Si el filferro està tancat o no The base object is the wire, it's formed from 2 objects - The base object is the wire, it's formed from 2 objects + L'objecte base és el filferro, està format per 2 objectes The tool object is the wire, it's formed from 2 objects - The tool object is the wire, it's formed from 2 objects + L'objecte eina és el filferro, està format per 2 objectes The start point of this line - The start point of this line + El punt d'inici d'esta línia The end point of this line - The end point of this line + El punt final d'esta línia The length of this line - The length of this line + La longitud d'esta línia Create a face if this object is closed - Create a face if this object is closed + Crea una cara si este objecte està tancat The number of subdivisions of each edge - The number of subdivisions of each edge + El nombre de subdivisions de cada aresta @@ -892,31 +891,31 @@ they will only be editable by changing the style through the 'Annotation style e Spacing between text and dimension line - Spacing between text and dimension line + L'espaiat entre el text i la línia de cota Rotate the dimension text 180 degrees - Rotate the dimension text 180 degrees + Gira el text de la cota 180 graus Text Position. Leave '(0,0,0)' for automatic position - Text Position. -Leave '(0,0,0)' for automatic position + Posició del Text. +Deixa "(0,0,0)" per a posició automàtica Text override. Write '$dim' so that it is replaced by the dimension length. - Text override. -Write '$dim' so that it is replaced by the dimension length. + Sobreescritura del Text. +Escriu "$dim" per a que això siga reemplaçat per la longitud de la cota. The number of decimals to show - The number of decimals to show + El nombre de decimals que cal mostrar @@ -936,71 +935,70 @@ Write '$dim' so that it is replaced by the dimension length. Rotate the dimension arrows 180 degrees - Rotate the dimension arrows 180 degrees + Gira les fletxes de la cota 180 graus The distance the dimension line is extended past the extension lines - The distance the dimension line is extended -past the extension lines + La distància en què la cota lineal s'estén més enllà de les línies d'extensió Length of the extension lines - Length of the extension lines + Longitud de les línies d'extensió Length of the extension line beyond the dimension line - Length of the extension line -beyond the dimension line + Longitud de la línea d'extensió +més enllà de la línea de cota Shows the dimension line and arrows - Shows the dimension line and arrows + Mostra la cota lineal i les fletxes - + If it is true, the objects contained within this layer will adopt the line color of the layer - If it is true, the objects contained within this layer will adopt the line color of the layer + Si es vertader, els objectes continguts en esta capa adoptaran el color de línea de la capa If it is true, the print color will be used when objects in this layer are placed on a TechDraw page - If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + Si es vertader, el color d'impressió serà utilitzat quan els objectes en esta capa siguen introduïts en una pàgina TechDraw The line color of the objects contained within this layer - The line color of the objects contained within this layer + El color de línia dels objectes continguts en esta capa The shape color of the objects contained within this layer - The shape color of the objects contained within this layer + El color de forma dels objectes continguts en esta capa The line width of the objects contained within this layer - The line width of the objects contained within this layer + El gruix de línia dels objectes continguts en esta capa The draw style of the objects contained within this layer - The draw style of the objects contained within this layer + El estil de dibuix dels objectes continguts en esta capa The transparency of the objects contained within this layer - The transparency of the objects contained within this layer + La transparència dels objectes continguts en esta capa The line color of the objects contained within this layer, when used on a TechDraw page - The line color of the objects contained within this layer, when used on a TechDraw page + El color de línia dels objectes continguts en esta capa, quen s'utilitzen en una pàgina TechDraw @@ -1015,7 +1013,7 @@ beyond the dimension line The size of the text - The size of the text + La mida del text @@ -1165,6 +1163,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1509,27 @@ mitjançant l'opció Eines ->Gestor de complements Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2986,12 +2989,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5315,7 +5318,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6397,17 +6400,17 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index abec2179f3..df351952ca 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index aa9389d534..4040de0422 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1138,22 +1138,22 @@ Use 'arch' to force US arch notation The base object used by this object - The base object used by this object + Đối tượng nền sử dụng bởi đối tượng này The PAT file used by this object - The PAT file used by this object + Tệp PAT dùng bởi đối tượng này The pattern name used by this object - The pattern name used by this object + Tên mẫu sử dụng bởi đối tượng này The pattern scale used by this object - The pattern scale used by this object + Tỉ lệ mẫu sử dụng bởi đối tượng này @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ Xin vui lòng cài đặt chương trình bổ trợ thư viên dxf bằng cách Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2987,12 +2992,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5343,7 +5348,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6426,17 +6431,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select layer contents - + custom tùy chọn - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index 411a07c062..97e23c8df6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 3c78b31cbe..42f7f484ae 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -960,7 +960,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1162,6 +1162,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1501,27 +1506,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2982,12 +2987,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5337,7 +5342,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6418,17 +6423,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select layer contents - + custom 自定义 - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index 64ae03d67e..79c3cc1025 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 123bfe66a5..3549727c39 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -963,7 +963,7 @@ beyond the dimension line Shows the dimension line and arrows - + If it is true, the objects contained within this layer will adopt the line color of the layer If it is true, the objects contained within this layer will adopt the line color of the layer @@ -1165,6 +1165,11 @@ Use 'arch' to force US arch notation If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + If it is true, the objects contained within this layer will adopt the shape color of the layer + Dialog @@ -1506,27 +1511,27 @@ from menu Tools -> Addon Manager Add new layer - + Toggles Grid On/Off Toggles Grid On/Off - + Object snapping Object snapping - + Toggles Visual Aid Dimensions On/Off Toggles Visual Aid Dimensions On/Off - + Toggles Ortho On/Off Toggles Ortho On/Off - + Toggles Constrain to Working Plane On/Off Toggles Constrain to Working Plane On/Off @@ -2987,12 +2992,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren' Draft_Snap - + Toggles Grid On/Off Toggles Grid On/Off - + Toggle Draft Grid Toggle Draft Grid @@ -5342,7 +5347,7 @@ Note: C++ exporter is faster, but is not as featureful yet Workbench - + Draft Snap Draft Snap @@ -6423,17 +6428,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select layer contents - + custom custom - + Unable to convert input into a scale factor Unable to convert input into a scale factor - + Set custom annotation scale in format x:x, x=x Set custom annotation scale in format x:x, x=x diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts index 7a37c2cd6b..8f016c9821 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - محدد مرجع الشكل الهندسي لـ - Add @@ -134,6 +129,11 @@ Solid صلب + + + Geometry reference selector for a + محدد مرجع الشكل الهندسي لـ + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_bg.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_bg.ts index 325b973875..430c8a02c2 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_bg.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_bg.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Твърдо тяло + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index e210bc3626..735c3beb05 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -134,6 +129,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index 1403453184..1953fa1c20 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index bacb23baad..61c4f40dc8 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -72,12 +72,7 @@ Geometry reference selector for a - Geometry reference selector for a - - - - Geometry reference selector for a - Volič referenční geometrie pro + Výběr referenční geometrie pro @@ -92,37 +87,37 @@ Click on "Add" and select geometric elements to add them to the list. - Click on "Add" and select geometric elements to add them to the list. + Klikněte na "Přidat" a vyberte geometrické prvky pro jejich přidání do seznamu. The following geometry elements are allowed to select: - The following geometry elements are allowed to select: + Následující geometrické prvky lze vybrat: Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Klikněte na "Přidat" a vyberte geometrické prvky pro jejich přidání do seznamu.{}Následující geometrické prvky lze vybrat: {}{}{} If no geometry is added to the list, all remaining ones are used. - If no geometry is added to the list, all remaining ones are used. + Pokud není do seznamu přidána žádná geometrie, použijí se všechny zbývající geometrie. Click on "Add" and select geometric elements to add to the list. - Click on "Add" and select geometric elements to add to the list. + Klikněte na "Přidat" a vyberte geometrické prvky, které chcete přidat do seznamu. Click on 'Add' and select geometric elements to add them to the list. - Click on 'Add' and select geometric elements to add them to the list. + Klikněte na "Přidat" a vyberte geometrické prvky pro jejich přidání do seznamu. {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {}Pokud není do seznamu přidána žádná geometrie, použijí se všechny zbývající geometrie. @@ -134,6 +129,11 @@ Solid Těleso + + + Geometry reference selector for a + Volič referenční geometrie pro + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index fdf31e42ad..23f0a3e101 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometrie-Referenzauswahl für ein - - - Geometry reference selector for a - Geometrie-Referenzauswahl für ein - Add @@ -134,6 +129,11 @@ Solid Vollkörper + + + Geometry reference selector for a + Geometrie-Referenzauswahl für ein + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 3daccfc003..fb7651f2eb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Επιλογέας γεωμετρίας αναφοράς για ένα - Add @@ -134,6 +129,11 @@ Solid Στερεό + + + Geometry reference selector for a + Επιλογέας γεωμετρίας αναφοράς για ένα + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index c1ffff21c1..564e041f82 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selector de referencia de geometría para un - - - Geometry reference selector for a - Selector de referencia de geometría para un - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Selector de referencia de geometría para un + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 7774fde7e0..add3940b68 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selector de referencia de geometría para un - - - Geometry reference selector for a - Selector de referencia de geometría para una - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Selector de referencia de geometría para una + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm index 21ffe7a0be..7831b85329 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 9b13ede645..8f569958ba 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria-erreferentziaren hautatzailea honetarako: - - - Geometry reference selector for a - Geometria-erreferentziaren hautatzailea honetarako: - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Sakatu 'Gehitu' eta hautatu elementu geometrikoak, haiek zerrendari gehitzeko.{} Honako geometria-elementuak hautatu daitezke: {}{}{} @@ -134,6 +129,11 @@ Solid Solidoa + + + Geometry reference selector for a + Geometria-erreferentziaren hautatzailea honetarako: + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 44ef6b0e3d..24169c6e5e 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrinen viitevalitsin kohteelle - Add @@ -134,6 +129,11 @@ Solid Kiintomuoto + + + Geometry reference selector for a + Geometrinen viitevalitsin kohteelle + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts index 62e9d53587..973652ac74 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 190331eebc..dcd9284cd2 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Sélecteur de référence de géométrie pour une - - - Geometry reference selector for a - Sélecteur de référence de géométrie pour une - Add @@ -134,6 +129,11 @@ Solid Solide + + + Geometry reference selector for a + Sélecteur de référence de géométrie pour une + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 1dab0ce553..d4036f3df0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - O selector de xeometría de referencia para - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + O selector de xeometría de referencia para + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 793e2ddc96..332f9ee23f 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -75,11 +75,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Odabir referentne geometrije za - Add @@ -135,6 +130,11 @@ Solid Čvrsto tijelo + + + Geometry reference selector for a + Odabir referentne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 5dd155554d..5a0fc13612 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria hivatkozás választó ehhez - - - Geometry reference selector for a - Geometria hivatkozás kiválasztó ehhez - Add @@ -134,6 +129,11 @@ Solid Szilárd test + + + Geometry reference selector for a + Geometria hivatkozás kiválasztó ehhez + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index 69e8883637..0e81d62b16 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Pemilih referensi geometri untuk - - - Geometry reference selector for a - Pemilih referensi geometri untuk - Add @@ -134,6 +129,11 @@ Solid Padat + + + Geometry reference selector for a + Pemilih referensi geometri untuk + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index ce65c0c278..bb5b741772 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index bb49153958..800695dcfc 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selettore della geometria di riferimento per - - - Geometry reference selector for a - Selettore della geometria di riferimento per - Add @@ -102,7 +97,7 @@ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} - Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + Cliccare su "Aggiungi" e selezionare gli elementi geometrici da aggiungere alla lista. {} I seguenti elementi geometrici sono ammessi per essere selezionati: {}{}{} @@ -122,7 +117,7 @@ {}If no geometry is added to the list, all remaining ones are used. - {}If no geometry is added to the list, all remaining ones are used. + {} Se nessuna geometria è aggiunta alla lista, vengono usate tutte. @@ -134,6 +129,11 @@ Solid Solido + + + Geometry reference selector for a + Selettore della geometria di riferimento per + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 56bc750326..8303825505 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -74,11 +74,6 @@ Geometry reference selector for a ジオメトリー参照セレクター - - - Geometry reference selector for a - ジオメトリー参照セレクター - Add @@ -134,6 +129,11 @@ Solid ソリッド + + + Geometry reference selector for a + ジオメトリー参照セレクター + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts index d6b9ece7ee..e7ef7cd798 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Pilnaviduris daiktas + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index c6230ec861..20806b13f5 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometriereferentiekeuze voor een - Add @@ -134,6 +129,11 @@ Solid Volumemodel + + + Geometry reference selector for a + Geometriereferentiekeuze voor een + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 062f2f4095..2505c43a53 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Określenie odniesienia do geometrii dla - - - Geometry reference selector for a - Selektor odniesienia geometrii dla - Add @@ -134,6 +129,11 @@ Solid Bryła + + + Geometry reference selector for a + Selektor odniesienia geometrii dla + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index f4b69ea901..f5f892b730 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de referência geometria para um - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de referência geometria para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 5c69d2f1ec..fe086f9fbb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de geometria de referência para um - Add @@ -134,6 +129,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de geometria de referência para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 74def81279..740d54c452 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrie selectorul de referinţă pentru o - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometrie selectorul de referinţă pentru o + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index d916ec59e5..eef032c4db 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 35786472bd..44a73c48a3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Выбор геометрии для - Add @@ -134,6 +129,11 @@ Solid Твердотельный объект + + + Geometry reference selector for a + Выбор геометрии для + SolidSelector @@ -1899,7 +1899,7 @@ Run Calculix - Запустить CalculiX + Запустить Calculix diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 87a33ac940..58db25f6ba 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Izbirnik referenčne geometrije za - - - Geometry reference selector for a - Izbirnik referenčne geometrije za - Add @@ -134,6 +129,11 @@ Solid Telo + + + Geometry reference selector for a + Izbirnik referenčne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index a8c530832b..937e350f77 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm index 43fd5c81e8..906fd213c4 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 21584a4cff..52c647f013 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -29,7 +29,7 @@ Working Directory - Çalışma dizini + Çalışma Dizini @@ -44,7 +44,7 @@ Elapsed Time: - Geçen zaman: + Geçen Süre: @@ -74,11 +74,6 @@ Geometry reference selector for a için geometri kaynak noktası seçici - - - Geometry reference selector for a - Geometri referans seçici için bir - Add @@ -134,6 +129,11 @@ Solid Katı + + + Geometry reference selector for a + Geometri referans seçici için bir + SolidSelector @@ -309,7 +309,7 @@ Beam rotation - Çubuk Döndürme + Kiriş Döndürme diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index fc42e006cf..a638daa908 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid Суцільне тіло + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 6b1cc35e48..0c807dce37 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -134,6 +129,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index ef9f094f0f..7140b6a6df 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Công cụ chọn tham chiếu hình học cho một - Add @@ -134,6 +129,11 @@ Solid Chất rắn + + + Geometry reference selector for a + Công cụ chọn tham chiếu hình học cho một + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index f9f5b07242..0aa66e00eb 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - 的几何体参考选择器 - Add @@ -134,6 +129,11 @@ Solid 实体 + + + Geometry reference selector for a + 的几何体参考选择器 + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 298adff706..28aca0736b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -134,6 +129,11 @@ Solid 實體 + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm index d4ed19230c..f300d3ae1f 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index d119a63672..1ede2f22c7 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -2055,7 +2055,7 @@ to a smoother appearance. Center - Střed + Na střed diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm index 10ab56636a..317f3b6654 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts index ad6306c857..234654d4bd 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ar.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. لا يوجد أي مستند نشط - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. حدد شكلا للتنسيق، أولا. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.qm index acf9903c99..d21a9c056a 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.ts index 4ae1a1196f..999876a978 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_bg.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. No active document - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Първо изберете облик за полигонално омрежване. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm index 4d958c3eef..87c56e4c83 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts index 3fbfbaea42..d8edf0f500 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ca.ts @@ -491,7 +491,21 @@ A value in the range of 0.2-10. Document no Actiu - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Seleccioneu primer una forma per al mallat diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm index 2c5842f6a1..23ce43cf4f 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts index 276dbd91b8..2fbd2af63b 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Žádný aktivní dokument - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Nejprve vyber tvar pro síťování. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm index f2f7e61144..540cccd618 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts index e28f3dd0c8..3c4e90c6b6 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts @@ -495,7 +495,21 @@ Ein Wert im Bereich von 0.2-10. Kein aktives Dokument - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Wählen Sie zuerst eine Form für die Vernetzung. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm index fd2da58cdb..0f1f87653d 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts index 4d278cccac..c4f6804088 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_el.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Κανένα ενεργό έγγραφο - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Επιλέξτε ένα σχήμα για πλεγματοποίηση, πρώτα. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.qm index becf05f949..e3102c8edd 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts index b1394d851d..5ece6a66ef 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts @@ -497,7 +497,21 @@ Un valor en el rango de 0.2-10. Ningún documento activo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Seleccione primero una forma para la malla. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm index 7620ba18f3..e51af17cbd 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts index ba4f321c0c..5cd2f84fab 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts @@ -497,7 +497,21 @@ Un valor en el rango de 0.2-10. Ningún documento activo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Seleccione primero una forma para el mallado. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm index 1f41cb275e..a060f5d756 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts index 869ab528e2..fa01aee6b1 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_eu.ts @@ -498,7 +498,21 @@ A value in the range of 0.2-10. Ez dago dokumentu aktiborik - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Hasteko, hautatu forma bat amarauna sortzeko. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm index 4abe5efa7b..9eb39bd7de 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts index 7eea6d2a6a..0902c9891b 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts @@ -497,7 +497,21 @@ Arvo välillä 0,2-10. Ei aktiivista dokumenttia - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Valitse ensin muoto verkkoihin. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm index 0948ffa2b0..f6babc3a25 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts index 15127499e8..ffb641bd2c 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fil.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Walang aktibong dokumento - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Pumili ng hugis para sa meshing, una. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm index 79f194e293..9814efa503 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts index 48c3c9ef99..ca14ea025f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fr.ts @@ -497,7 +497,21 @@ Une valeur dans la plage de 0.2-10. Aucun document actif - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Sélectionner d'abord une forme pour le maillage. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm index 10499efd5c..c545528b26 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts index e015325d7e..ba7de97ad1 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_gl.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Ningún documento activo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Escolme primeiro unha forma para a malla. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm index feff2c7008..589ed3bdb7 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts index 4b0668c9aa..11b0434251 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hr.ts @@ -500,7 +500,21 @@ Vrijednost u rasponu 0.2-10. Nema aktivnog dokumenta - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Prvo daberite oblik za umrežavanje. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm index 9c1f093872..747be6dd9f 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts index 474abbe0a4..e410b581de 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_hu.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Nincs aktív dokumentum - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Válassza ki a formát kapcsolás előtt. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm index 39dd7957f0..1bb0af024b 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts index da2d9372e8..f317f1eb23 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_id.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Tidak ada dokumen aktif - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Pilih bentuk untuk meshing, pertama. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm index 18cd7b5160..44972d1b35 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts index 7d9e8bf64f..7b53399bb1 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_it.ts @@ -497,7 +497,21 @@ Un valore nell'intervallo tra 0.2-10. Nessun documento attivo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Selezionare prima una forma per il meshing. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm index 95d2dc0cb3..2ea1e35fe1 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts index 7f9b535a41..27a34191fc 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts @@ -496,7 +496,21 @@ A value in the range of 0.2-10. アクティブなドキュメントがありません - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. 最初にメッシュにするシェイプを選択してください。 diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm index 3878789446..f2f06ea7dd 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts index efb4120eee..9f11559604 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_lt.ts @@ -495,7 +495,21 @@ Dydis kinta 0,2-10 verčių ribose. Nėra taisytino dokumento - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Pirmiausia pasirinkite daiktą tinklui sukurti. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm index f05764de71..93b3e04796 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts index cf6016145b..48bf0c5a20 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts @@ -497,7 +497,21 @@ Een waarde tussen 0,2 en 10. Geen actief document - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Selecteer voor de meshing eerst een vorm. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm index b6d983e2ab..0de7e4d0ec 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index 4352610a08..fc91ef9edc 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -497,7 +497,21 @@ Wartość w zakresie 0,2–10. Brak aktywnego dokumentu - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Najpierw wybierz kształt do utworzenia siatki. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm index 7945777093..de9c5f0af6 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts index 777deb1d35..3c2a147ca9 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts @@ -497,7 +497,21 @@ Um valor na amplitude de 0.2-10. Nenhum documento ativo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Selecione primeiro uma forma para malhagem. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm index 05fe392ebe..493e8f0b19 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts index 8c4eda3de7..7f53bc32f7 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts @@ -497,7 +497,21 @@ Um valor na amplitude de 0.2-10. Nenhum documento ativo - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Selecione primeiro, uma forma para a malha. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm index 70d0a21249..31e13696be 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts index 093f4243e3..79923fca66 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Nici un document activ - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Selectati mai intai o forma pentru crearea retelei. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm index 0a3210feca..2de23f0abc 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts index 0c36a52471..7072a73460 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Нет активного документа - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Сначала выберите фигуру для создания полигональной сетки. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm index 18faf371be..8c750d51d2 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts index 16d357a42b..f0e9a34f9b 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts @@ -496,7 +496,21 @@ Razpon vrednosti je 0.2-10. Ni dejavnega dokumenta - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Najprej izberite obliko za ploskovjenje. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm index 7168114db0..940c00c5ce 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts index 9496b37779..c3eee9440b 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Inget aktivt dokument - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Markera en form för nät, först. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm index 4e54ea4579..9b9fd25c76 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts index 46cabdcad1..d72f3d693a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_tr.ts @@ -494,7 +494,21 @@ A value in the range of 0.2-10. Etkin belge yok - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Önce parçacık haline getirmek için bir şekil seçiniz. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm index 085ba796a4..2249bdc7da 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts index 80f3e8aab2..d138c87079 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Немає активного документу - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Спочатку оберіть форму для злиття. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm index f10878d23b..72ef8c02dc 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts index 9cdce93bfb..fc8d0551fc 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_val-ES.ts @@ -491,7 +491,21 @@ A value in the range of 0.2-10. No hi ha cap document actiu. - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Seleccioneu primer una forma per al mallat diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm index b1f7a4f3dc..ce9b0dd358 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts index 3ed1bbe922..a13c1f5306 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_vi.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. Không có tài liệu nào còn hiệu lực - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. Đầu tiên, chọn hình dạng để chia lưới. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm index e8da77a084..1c54f9ec65 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts index b5f983d38f..7407a222c8 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-CN.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. 没有活动文档 - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. 请先选择需要网格化的形状. diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm index 33ab37e2c3..d4273b5519 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts index 40a842e30f..cd875a11cc 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_zh-TW.ts @@ -497,7 +497,21 @@ A value in the range of 0.2-10. 未選擇文件 - + + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + You have selected a body without tip. +Either set the tip of the body or select a different shape, please. + + + + You have selected a shape without faces. +Select a different shape, please. + You have selected a shape without faces. +Select a different shape, please. + + + Select a shape for meshing, first. 請先選擇造型來產生網格 diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm index a235dfdafe..be42a5c60c 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts index ea7373961c..e2dad457ce 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts @@ -6,7 +6,7 @@ General settings - Общие настройки + Основные настройки diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts index 5897341489..8788f28c34 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_bg.ts b/src/Mod/Part/Gui/Resources/translations/Part_bg.ts index bc25f8f703..277483221f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_bg.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_bg.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index a96a074b1e..98a18437d2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -258,6 +258,16 @@ Es crearà un 'Filtre de Compost' per a cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'interseccionen + Boolean fragments @@ -345,16 +355,6 @@ Feu clic a 'Continua' per a crear la propietat de totes formes, o en 'Interromp' Slice to compound Llesca a la composició - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'interseccionen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 487125c98b..f9bc563fa0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -260,6 +260,16 @@ Vytvoří "Filtr složenin" pro každý tvar. Part_SplitFeatures + + + Boolean Fragments + Booleovské fragmenty + + + + Split objects where they intersect + Rozdělit objekty, kde se protínají + Boolean fragments @@ -349,16 +359,6 @@ Klikněte 'Pokračovat' chcete-li přesto prvek vytvořit, nebo "Přerušit" pro Slice to compound Plátkovat na složeninu - - - Boolean Fragments - Booleovské fragmenty - - - - Split objects where they intersect - Rozdělit objekty, kde se protínají - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index da36300e20..8d2057a302 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -260,6 +260,16 @@ Es wird einen 'Compound-Filter' für jede Form erzeugen. Part_SplitFeatures + + + Boolean Fragments + Boolesche Fragmente + + + + Split objects where they intersect + Auftrennen von Objekten an deren Schnittstellen + Boolean fragments @@ -345,16 +355,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Teilen zu einem Verbund - - - Boolean Fragments - Boolesche Fragmente - - - - Split objects where they intersect - Auftrennen von Objekten an deren Schnittstellen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 41268212ec..330e9e2642 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts index 1c9635a108..ed0bcf8a17 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-AR.ts @@ -260,6 +260,16 @@ Creará un 'Filtro Compuesto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Dividir objetos donde se intersectan + Boolean fragments @@ -349,16 +359,6 @@ Haga clic en 'Continuar' para crear la operación de todos modos, o en 'Anular' Slice to compound Seccionar a compuesto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Dividir objetos donde se intersectan - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 3ab972017f..c76ec901bf 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -260,6 +260,16 @@ Se creará un 'Filtro Compuesto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Corta objetos donde intersectan + Boolean fragments @@ -349,16 +359,6 @@ Haga clic en 'Continuar' para crear la función de todos modos, o 'Abortar' para Slice to compound Corte a compuesto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Corta objetos donde intersectan - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 91370912e1..08afe68dc8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Zati boolearrak + + + + Split objects where they intersect + Zatitu objektuak haiek ebakitzen diren gunean + Boolean fragments @@ -348,16 +358,6 @@ Hala ere elementua sortu nahi baduzu, egin klik 'Jarraitu' aukeran, edo bestela Slice to compound Xerratu konposatua - - - Boolean Fragments - Zati boolearrak - - - - Split objects where they intersect - Zatitu objektuak haiek ebakitzen diren gunean - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 83259d4175..e685863e53 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -260,6 +260,16 @@ Jokaiselle muodolle luodaan myös 'Yhdistelmäobjektin suodatin'. Part_SplitFeatures + + + Boolean Fragments + Boolen operaation sirpaleet + + + + Split objects where they intersect + Jaa objektit paloihin leikkauskohdista + Boolean fragments @@ -349,16 +359,6 @@ Napsauta 'Jatka' luodaksesi ominaisuuden joka tapauksessa, tai 'Keskeytä' peruu Slice to compound Siivuta yhdistelmämuodoksi - - - Boolean Fragments - Boolen operaation sirpaleet - - - - Split objects where they intersect - Jaa objektit paloihin leikkauskohdista - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts index 02ff32b568..0a05e29036 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index aa9360a6c1..8ff221848e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -259,6 +259,16 @@ Cela créera un 'filtre composé' pour chaque forme. Part_SplitFeatures + + + Boolean Fragments + Fragments Booléens + + + + Split objects where they intersect + Diviser les objets à leur intersection + Boolean fragments @@ -348,16 +358,6 @@ Cliquez sur 'Continuer' pour créer la fonction quand même, ou 'Abandonner' pou Slice to compound Trancher vers composé - - - Boolean Fragments - Fragments Booléens - - - - Split objects where they intersect - Diviser les objets à leur intersection - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 4b17cbaeb1..21da116657 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Divide obxectos onde intersecten + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Tallar un composto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Divide obxectos onde intersecten - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index ae2bf5b37d..faf5781f8d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -268,6 +268,16 @@ Stvorit će 'Složeni filtar' za svaki oblik. Part_SplitFeatures + + + Boolean Fragments + Booleovi Fragmenti + + + + Split objects where they intersect + Razdjeli objekate gdje se sijeku + Boolean fragments @@ -359,16 +369,6 @@ Kliknite "Nastavi" da biste svejedno stvorili značajku ili "Prekini" da biste j Slice to compound Razdijeli u složeni objekt - - - Boolean Fragments - Booleovi Fragmenti - - - - Split objects where they intersect - Razdjeli objekate gdje se sijeku - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index db579c368a..071e016849 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -259,6 +259,16 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Part_SplitFeatures + + + Boolean Fragments + Logikai töredékek + + + + Split objects where they intersect + Metszőpontnál szétválasztja a tárgyakat + Boolean fragments @@ -347,16 +357,6 @@ Kattintson a 'Folytatás' gombra a funkció létrehozásához, vagy a 'Megszakí Slice to compound Szeletelje összetevőkre - - - Boolean Fragments - Logikai töredékek - - - - Split objects where they intersect - Metszőpontnál szétválasztja a tárgyakat - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index e19dae6616..1cc2fa305a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.qm b/src/Mod/Part/Gui/Resources/translations/Part_it.qm index ffbb830149..dc041f9378 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_it.qm and b/src/Mod/Part/Gui/Resources/translations/Part_it.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 3a55efbfc4..408c77fe30 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -259,6 +259,16 @@ Creerà un 'filtro composto' per ogni forma. Part_SplitFeatures + + + Boolean Fragments + Frammenti booleani + + + + Split objects where they intersect + Dividi gli oggetti dove si intersecano + Boolean fragments @@ -348,16 +358,6 @@ fare clic su 'Continua' per creare comunque la forma, o 'Annulla' per annullare. Slice to compound Trancia in composto - - - Boolean Fragments - Frammenti booleani - - - - Split objects where they intersect - Dividi gli oggetti dove si intersecano - Slice a selected object by using other objects as cutting tools. @@ -3115,7 +3115,7 @@ fare clic su 'Continua' per creare comunque la forma, o 'Annulla' per annullare. Pitch: - Beccheggio: + Passo: @@ -4204,7 +4204,7 @@ Selezionare prima uno o più spigoli. Pitch: - Beccheggio: + Passo: @@ -4992,7 +4992,7 @@ Selezionare prima uno o più spigoli. Pitch: - Beccheggio: + Passo: diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 6fa875c693..64d94bf705 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -259,6 +259,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + ブーリアン演算 フラグメント + + + + Split objects where they intersect + 交差するオブジェクトを切断 + Boolean fragments @@ -346,16 +356,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound コンパウンドへスライス - - - Boolean Fragments - ブーリアン演算 フラグメント - - - - Split objects where they intersect - 交差するオブジェクトを切断 - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index 7184343850..91a744ec0f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index db776e61cd..c0a8ade02b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -260,6 +260,16 @@ Het maakt een 'Samengesteld Filter' voor elke vorm. Part_SplitFeatures + + + Boolean Fragments + Booleaanse fragmenten + + + + Split objects where they intersect + Splits voorwerpen waar ze overlappen + Boolean fragments @@ -349,16 +359,6 @@ Klik op 'Doorgaan' om de functie toch aan te maken, of op 'Afbreken' als u wilt Slice to compound Versnijden tot groep - - - Boolean Fragments - Booleaanse fragmenten - - - - Split objects where they intersect - Splits voorwerpen waar ze overlappen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index d3da616c21..35a6788c90 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 950903cf46..904169a6c0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -96,7 +96,7 @@ Attached with mode {mode} - Załączony w trybie {mode} + Dołączono w trybie {mode} @@ -140,17 +140,17 @@ do filtrowania według kolizji lub odległości. Compound Filter: remove some childs from a compound - Filtr kombinacji: usuń dzieci z kombinacji + Filtr złożeń: usuń niektóre elementy ze złożenia Select a shape that is a compound, first! Second selected item (optional) will be treated as a stencil. - Zaznacz kształt, który jest związkiem, po raz pierwszy! Drugi wybrany element (opcjonalnie) będzie traktowany jako szablon. + Wybierz kształt, który jest złożony, jako pierwszy! Drugi wybrany element (opcjonalny) będzie traktowany jako kształt szablonu. First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. - Najpierw wybierz kształt, który jest kształtem złożonym. Jeśli wybrany zostanie drugi obiekt (opcjonalnie) zostanie on traktowany jako szablon. + Najpierw wybierz kształt, który jest kształtem złożonym. Jeśli wybrany zostanie drugi obiekt (opcjonalnie) zostanie on potraktowany jako kształt szablonu. @@ -260,6 +260,16 @@ Stworzy to „Filtr kompozytowy” dla każdego kształtu. Part_SplitFeatures + + + Boolean Fragments + Fragmenty funkcji logicznej + + + + Split objects where they intersect + Podziel obiekty, które się przecinają + Boolean fragments @@ -349,16 +359,6 @@ Kliknij "Kontynuuj", aby mimo to utworzyć właściwość, lub "Przerwij", aby a Slice to compound Krojenie na kształty złożone - - - Boolean Fragments - Fragmenty funkcji logicznej - - - - Split objects where they intersect - Podziel obiekty, które się przecinają - Slice a selected object by using other objects as cutting tools. @@ -1332,7 +1332,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Tangent AttachmentLine mode caption - Styczny + Stycznie @@ -2604,7 +2604,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Fillet... - Zaokrąglenie... + Zaokrąglenie ... @@ -2676,7 +2676,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Loft... - Wyciągnięcie po profilach... + Wyciągnięcie po profilach ... @@ -2802,7 +2802,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Create primitives... - Utwórz bryły pierwotne... + Utwórz bryły pierwotne ... @@ -2897,7 +2897,7 @@ Kliknij "Kontynuuj", aby mimo to utworzyć element, lub "Przerwij", aby anulowa Make a section of two shapes - Utwórz iloraz dwóch obiektów + Utwórz część wspólną z dwóch kształtów @@ -3399,7 +3399,7 @@ Wskazówka: aby uwzględnić również długość krawędzi, ustaw obie wartośc Against: - Przeciwko: + Przeciwnie: @@ -3414,7 +3414,7 @@ Wskazówka: aby uwzględnić również długość krawędzi, ustaw obie wartośc Symmetric - Symetryczna + Symetrycznie @@ -5184,7 +5184,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Skin - Skóra + Powłoka @@ -5204,12 +5204,12 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Arc - Łuk + Wzdłuż łuku Tangent - Styczny + Stycznie diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index a813d3c4da..88caa60d24 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -260,6 +260,16 @@ Será criado um 'Filtro Composto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Separa os objetos, pelas suas intersecções + Boolean fragments @@ -349,16 +359,6 @@ clique em 'Continuar' para criar o objeto mesmo assim, ou 'Abortar' para cancela Slice to compound Fatiar para composto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Separa os objetos, pelas suas intersecções - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 8412407151..a48a6221e7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -260,6 +260,16 @@ Irá criar um 'Filtro Composto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos de booleano + + + + Split objects where they intersect + Separa os objetos, onde eles se intercetam + Boolean fragments @@ -349,16 +359,6 @@ clique em 'Continuar' para criar o objeto de qualquer maneira, ou 'Abortar' para Slice to compound Fatia para composto - - - Boolean Fragments - Fragmentos de booleano - - - - Split objects where they intersect - Separa os objetos, onde eles se intercetam - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 2484d504e5..5f2bcdb43b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -260,6 +260,16 @@ Va crea un "Filtru compus" pentru fiecare formă. Part_SplitFeatures + + + Boolean Fragments + Fragmente booleene + + + + Split objects where they intersect + Separă obiectele acolo unde se intersectează + Boolean fragments @@ -349,16 +359,6 @@ Faceţi clic pe "Continuaţi" pentru a crea forma oricum sau pe 'Abandonați' pe Slice to compound Slice to compound - - - Boolean Fragments - Fragmente booleene - - - - Split objects where they intersect - Separă obiectele acolo unde se intersectează - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm index 75512a7fe8..e5de77b8da 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index eb13de63f3..4468e0ac5c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Получить все фрагменты булевой операции + + + + Split objects where they intersect + Разделение объектов там, где они пересекаются + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Надрезать - - - Boolean Fragments - Получить все фрагменты булевой операции - - - - Split objects where they intersect - Разделение объектов там, где они пересекаются - Slice a selected object by using other objects as cutting tools. @@ -2352,7 +2352,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Chamfer the selected edges of a shape - Притупить фаской выбранные ребра фигуры + Добавить фаску на выбранные ребра фигуры @@ -2675,12 +2675,12 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Loft... - Лофт... + Профиль... Utility to loft - Утилита лофта + Утилита для профиля @@ -4688,7 +4688,7 @@ Please check one or more edge entities first. Loft - Лофт + Профиль @@ -5148,7 +5148,7 @@ Please check one or more edge entities first. Loft - Лофт + Профиль diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 0266c28ac7..7c8f6c719e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -260,6 +260,16 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Part_SplitFeatures + + + Boolean Fragments + Drobci logične operacije + + + + Split objects where they intersect + Razcepi predmete, kjer se sekajo + Boolean fragments @@ -348,16 +358,6 @@ Kliknite "Nadaljuj", če želite vseeno ustvariti značilnost, ali "Prekini", za Slice to compound Razcepki v sestav - - - Boolean Fragments - Drobci logične operacije - - - - Split objects where they intersect - Razcepi predmete, kjer se sekajo - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index fb725158a3..cf7c5c58e5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Booleska fragment + + + + Split objects where they intersect + Dela objekt där de skär varandra + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Delning till komposition - - - Boolean Fragments - Booleska fragment - - - - Split objects where they intersect - Dela objekt där de skär varandra - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 1736b8fed2..bd2027ae23 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -258,6 +258,16 @@ Bu işlem her bir şekil için 'Birleşim Süzgeci' oluşturacak. Part_SplitFeatures + + + Boolean Fragments + Mantıksal (Boolean) Parçalar + + + + Split objects where they intersect + Nesnelerin kesiştiği yerlerden ayır + Boolean fragments @@ -345,16 +355,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Bileşiği dilimle - - - Boolean Fragments - Mantıksal (Boolean) Parçalar - - - - Split objects where they intersect - Nesnelerin kesiştiği yerlerden ayır - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm index 48e945e968..c5d73dfac1 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index ef5c5455f7..a0b2ef9168 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. @@ -1695,7 +1695,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Object's X Y Z Attachment3D mode caption - Object's X Y Z + X Y Z об'єкта @@ -1707,7 +1707,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Object's X Z-Y Attachment3D mode caption - Object's X Z-Y + X Z-Y об'єкта @@ -1719,7 +1719,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Object's Y Z X Attachment3D mode caption - Object's Y Z X + Y Z X об'єкта @@ -1927,7 +1927,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Align O-Y-X Attachment3D mode caption - Align O-Y-X + Вирівняти O-Y-X @@ -1939,7 +1939,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Align O-N-X Attachment3D mode caption - Align O-N-X + Вирівняти O-N-X @@ -4612,7 +4612,7 @@ Please check one or more edge entities first. Random shape color - Random shape color + Випадковий колір фігури @@ -5094,7 +5094,7 @@ Please check one or more edge entities first. Shape Content - Shape Content + Вміст форми diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index d0c99983a7..09c00f55c9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'intersequen + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Llesca a la composició - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'intersequen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index 8b8468157e..62fe6a65ee 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index ecb7eadb2d..8f7709d4df 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + 布尔片段 + + + + Split objects where they intersect + 从交叉处分割对象 + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - 布尔片段 - - - - Split objects where they intersect - 从交叉处分割对象 - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 3b36e9cea4..5302cc8fbb 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.qm index f1bf2164dd..fa473dad9c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.ts index 780b2f1dbc..97a445c166 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_bg.ts @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Помощник за проектиране на валове... Start the shaft design wizard - Start the shaft design wizard + Стартира помощника за проектиране на валове @@ -93,12 +93,12 @@ Additive helix - Additive helix + Добавъчна спирала Sweep a selected sketch along a helix - Sweep a selected sketch along a helix + Издърпва избраната скица по спирала @@ -471,7 +471,7 @@ Create sketch - Create sketch + Създаване скица @@ -489,12 +489,12 @@ Pad - Подложка + Протрузия Pad a selected sketch - Подложка на избрана скица + Протрузия от избрана скица @@ -4516,7 +4516,7 @@ over 90: larger hole radius at the bottom Shaft design wizard - Shaft design wizard + Помощник за проектиране на валове diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm index 8465e981f8..fbaf368749 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index ebfc795ff7..44a2137066 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -6,12 +6,12 @@ Involute gear... - Involute gear... + Evolventní ozubené kolo... Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + Vytvoří nebo upraví definici "evolventního" ozubeného kola. @@ -24,7 +24,7 @@ Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Vytvoří nebo upraví definici pastorku. @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Průvodce konstrukcí hřídele... Start the shaft design wizard - Start the shaft design wizard + Spusťte průvodce konstrukcí hřídele @@ -45,42 +45,42 @@ Length [mm] - Length [mm] + Délka [mm] Diameter [mm] - Diameter [mm] + Průměr [mm] Inner diameter [mm] - Inner diameter [mm] + Vnitřní průměr [mm] Constraint type - Constraint type + Typ omezení Start edge type - Start edge type + Typ počáteční hrany Start edge size - Start edge size + Velikost počáteční hrany End edge type - End edge type + Typ koncové hrany End edge size - End edge size + Velikost koncové hrany @@ -822,12 +822,12 @@ Edit ShapeBinder - Edit ShapeBinder + Upravit pořadač tvarů Create ShapeBinder - Create ShapeBinder + Vytvořit pořadač tvarů @@ -1979,7 +1979,7 @@ click again to end selection Cheesehead (deprecated) - Cheesehead (deprecated) + Válcová hlava (deprecated) @@ -3253,7 +3253,7 @@ click again to end selection Move tip - Move tip + Přesunout tip @@ -4510,7 +4510,7 @@ over 90: larger hole radius at the bottom Involute gear... - Involute gear... + Evolventní ozubené kolo... diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index e005d587db..e60e2c5f60 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index d4b8a84057..8669891aee 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -65,22 +65,22 @@ Start edge type - Start edge type + Art der Anfangskante Start edge size - Start edge size + Größe der Anfangskante End edge type - End edge type + Art der Endkante End edge size - End edge size + Größe der Endkante @@ -260,7 +260,7 @@ Duplicates the selected object and adds it to the active body - Dupliziert das ausgewählte Element und fügt es dem aktiven Körper hinzu + Dupliziert das ausgewählte Objekt und fügt es dem aktiven Körper hinzu @@ -350,7 +350,7 @@ Create a linear pattern feature - Erzeugen eines linearen Musters + Lineares Muster erzeugen @@ -489,7 +489,7 @@ Pad - Extrudieren + Aufpolsterung @@ -706,7 +706,7 @@ Make a thick solid - Erzeugen eines aufgedickten Volumenkörpers + Aufgedickten Festkörper erzeugen @@ -720,7 +720,7 @@ Create an additive primitive - Erzeugen eines zusätzlichen Grundkörpers + Hinzuzufügende Grundkörper @@ -2404,7 +2404,7 @@ entlang der angegebenen Richtung gemessen Pad parameters - Parameter der Extrusion + Parameter der Aufpolsterung @@ -3440,7 +3440,7 @@ Nochmaliges Klicken beendet den Auswahl-Modus. No valid features in this document - Keine gültigen Features in diesem Dokument + Keine gültigen Elemente in diesem Dokument @@ -4161,7 +4161,7 @@ Du kannst die Teile später jederzeit mit 'Part Design -> Migrieren...' migri Counterbore/sink dia - Durchmesser der Flachsenkung + Durchmesser der Senkung diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm index 0b7ab4374c..3404b24760 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 81c6776e68..f52fe241cb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -6,12 +6,12 @@ Involute gear... - Involute gear... + Engranaje inbolutua... Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + Engranaje inbolutuaren definizioa sortzen edo editatzen du. @@ -19,12 +19,12 @@ Sprocket... - Sprocket... + Piñoia... Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Piñoi-definizioa sortzen edo editatzen du. @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Ziria diseinatzeko morroia... Start the shaft design wizard - Start the shaft design wizard + Abiarazi ziria diseinatzeko morroia @@ -634,7 +634,7 @@ Create a sub-object(s) shape binder - Create a sub-object(s) shape binder + Sortu azpiobjektu baten forma-zorroa @@ -1479,8 +1479,8 @@ sakatu berriro hautapena amaitzeko - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - hautatu elementu bat hura nabarmentzeko +- egin klik bikoitza elementu batean alakak ikusteko @@ -1979,7 +1979,7 @@ sakatu berriro hautapena amaitzeko Cheesehead (deprecated) - Cheesehead (deprecated) + Gazta-burua (zaharkitua) @@ -2307,8 +2307,8 @@ sakatu berriro hautapena amaitzeko Use custom vector for pad direction otherwise the sketch plane's normal vector will be used - Use custom vector for pad direction otherwise -the sketch plane's normal vector will be used + Erabili bektore pertsonalizatua estrusioaren norabiderako, +bestela krokisaren planoren bektore normala erabiliko da @@ -2349,28 +2349,28 @@ the sketch plane's normal vector will be used If unchecked, the length will be measured along the specified direction - If unchecked, the length will be -measured along the specified direction + Markatu ez bada, luzera neurtuko da +zehaztutako norabidean Length along sketch normal - Length along sketch normal + Luzera krokisaren normalaren luzeran Offset to face - Offset to face + Desplazamendua aurpegiarekiko Offset from face in which pad will end - Offset from face in which pad will end + Estrusioa amaituko den aurpegitik dagoen desplazamendua Applies length symmetrically to sketch plane - Applies length symmetrically to sketch plane + Luzera simetrikoki aplikatzen dio krokisaren planoari @@ -2380,7 +2380,7 @@ measured along the specified direction Reverses pad direction - Reverses pad direction + Estrusioaren norabidea alderantzikatzen du @@ -2995,8 +2995,8 @@ sakatu berriro hautapena amaitzeko - select an item to highlight it - double-click on an item to see the features - - select an item to highlight it -- double-click on an item to see the features + - hautatu elementu bat hura nabarmentzeko +- egin klik bikoitza elementu batean elementuak ikusteko @@ -3144,12 +3144,12 @@ sakatu berriro hautapena amaitzeko Create an additive box by its width, height, and length - Create an additive box by its width, height, and length + Sortu kutxa gehitzaile bat bere zabalera, altuera eta luzera erabiliz Create an additive cylinder by its radius, height, and angle - Create an additive cylinder by its radius, height, and angle + Sortu zilindro gehitzaile bat bere erradioa, altuera eta angelua erabiliz @@ -3258,12 +3258,12 @@ sakatu berriro hautapena amaitzeko The moved feature appears after the currently set tip. - The moved feature appears after the currently set tip. + Lekuz aldatutako elementua unean ezarritako puntaren ondoren ageri da. Do you want the last feature to be the new tip? - Do you want the last feature to be the new tip? + Azken elementua punta berria izan dadin nahi duzu? @@ -3293,7 +3293,7 @@ sakatu berriro hautapena amaitzeko Sub-Shape Binder - Sub-Shape Binder + Azpiformaren zorroa @@ -3369,7 +3369,7 @@ sakatu berriro hautapena amaitzeko Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + Ziurtatu gorputzak elementu bat duela kenketako komandoa erabiltzen saiatu baino lehen. @@ -4039,7 +4039,7 @@ Geroago ere egin dezakezu migrazioa, 'Part Design -> Migratu' erabilita. 0 in - 0 in + 0 hazbete @@ -4201,7 +4201,7 @@ Geroago ere egin dezakezu migrazioa, 'Part Design -> Migratu' erabilita. Whether the hole gets a thread - Whether the hole gets a thread + Zuloak hari bat izango duen ala ez @@ -4211,12 +4211,12 @@ Geroago ere egin dezakezu migrazioa, 'Part Design -> Migratu' erabilita. Whether the hole gets a modelled thread - Whether the hole gets a modelled thread + Zuloak eredu-hari bat izango duen ala ez Model Thread - Model Thread + Eredu-haria @@ -4233,23 +4233,23 @@ Note that the calculation can take some time Customize thread clearance - Customize thread clearance + Pertsonalizatu hari-garbiketa Custom Thread Clearance - Custom Thread Clearance + Hari-garbiketa pertsonalizatua Clearance - Clearance + Garbiketa Custom Thread clearance value - Custom Thread clearance value + Hari-garbiketaren balio pertsonalizatua @@ -4275,8 +4275,8 @@ Note that the calculation can take some time Hole clearance Only available for holes without thread - Hole clearance -Only available for holes without thread + Zulo-garbiketa +Haririk ez duten zuloetan soilik erabilgarri @@ -4295,7 +4295,7 @@ Only available for holes without thread Wide - Wide + Zabala @@ -4406,7 +4406,7 @@ account for the depth of blind holes Take into account for depth - Take into account for depth + Hartu kontuan sakonerarako @@ -4447,7 +4447,7 @@ over 90: larger hole radius at the bottom Loose - Loose + Lasaia @@ -4503,17 +4503,17 @@ over 90: larger hole radius at the bottom Sprocket... - Sprocket... + Piñoia... Involute gear... - Involute gear... + Engranaje inbolutua... Shaft design wizard - Shaft design wizard + Ziria diseinatzeko morroia @@ -4523,12 +4523,12 @@ over 90: larger hole radius at the bottom Part Design Helper - Part Design Helper + Piezen diseinuaren laguntza Part Design Modeling - Part Design Modeling + Piezen diseinuaren ereduak sortzea diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index 933ccd389e..15dc1f5938 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index b33a27ba6b..ce2f1c7639 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -620,7 +620,7 @@ Create a new shape binder - Crea una nuova forma legata + Crea una nuovo Riferimento di Forma @@ -634,7 +634,7 @@ Create a sub-object(s) shape binder - Crea un legante di forma per sotto-oggetti + Crea un Riferimento di Forma per i(l) sotto-oggetti(o) @@ -822,17 +822,17 @@ Edit ShapeBinder - Modifica legante di forma + Modifica il Riferimento di Forma Create ShapeBinder - Crea legante di forma + Crea Riferimento di Forma Create SubShapeBinder - Crea legante di sotto forma + Crea Sotto-Riferimento di Forma @@ -1239,7 +1239,7 @@ Se zero, è uguale a Raggio2 Pitch: - Beccheggio: + Passo: @@ -1916,7 +1916,7 @@ fare nuovamente clic per terminare la selezione Pitch: - Beccheggio: + Passo: @@ -3293,7 +3293,7 @@ fare nuovamente clic per terminare la selezione Sub-Shape Binder - Sub-Shape Binder + Sotto-Riferimento di Forma @@ -3379,7 +3379,7 @@ fare nuovamente clic per terminare la selezione Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. - Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. + Considerare il Riferimento di Forma o una Funzione di Base per creare un riferimento di geometria esterno in un corpo. @@ -3530,7 +3530,7 @@ This may lead to unexpected results. No PartDesign features found that don't belong to a body. Nothing to migrate. - No PartDesign features found that don't belong to a body. Nothing to migrate. + Nessuna funzione PartDesign è stata trovata che non sia appartente al corpo. Niente da migrare. @@ -3606,16 +3606,14 @@ This may lead to unexpected results. Dependency violation - Dependency violation + Violazione dell'albero di dipendenza Early feature must not depend on later feature. - Early feature must not depend on later feature. - - + La funzione precedente non deve dipendere da quella seguente. @@ -3792,17 +3790,17 @@ This feature is broken and can't be edited. Edit shape binder - Modifica Lega-forme + Modifica il Riferimento di Forma Synchronize - Synchronize + Sincronizza Select bound object - Select bound object + Seleziona oggetto di contorno @@ -3844,9 +3842,9 @@ This feature is broken and can't be edited. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design -> Migrate'. + Nota: se si sceglie di migrare, non sarà più possibile modificare il file con le vecchie versioni di FreeCAD. +Se ci si rifiuta di migrare, non sarà possibile usare le nuove funzioni di PartDesign, come Bodies o Parts. Come risultato non si potranno usare le proprie parti nel Workbench Assembly. +Comunque si può decidere di migrare in ogni momento con 'Part Design -> Migrate'. @@ -3856,7 +3854,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Edit helix - Edit helix + Modifica elica @@ -3864,7 +3862,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket parameter - Sprocket parameter + Parametri Tasca @@ -3874,77 +3872,77 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Reference - Sprocket Reference + Riferimento Tasca ANSI 25 - ANSI 25 + ANSI 25 ANSI 35 - ANSI 35 + ANSI 35 ANSI 41 - ANSI 41 + ANSI 41 ANSI 40 - ANSI 40 + ANSI 40 ANSI 50 - ANSI 50 + ANSI 50 ANSI 60 - ANSI 60 + ANSI 60 ANSI 80 - ANSI 80 + ANSI 80 ANSI 100 - ANSI 100 + ANSI 100 ANSI 120 - ANSI 120 + ANSI 120 ANSI 140 - ANSI 140 + ANSI 140 ANSI 160 - ANSI 160 + ANSI 160 ANSI 180 - ANSI 180 + ANSI 180 ANSI 200 - ANSI 200 + ANSI 200 ANSI 240 - ANSI 240 + ANSI 240 @@ -3959,37 +3957,37 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ISO 606 06B - ISO 606 06B + ISO 606 06B ISO 606 08B - ISO 606 08B + ISO 606 08B ISO 606 10B - ISO 606 10B + ISO 606 10B ISO 606 12B - ISO 606 12B + ISO 606 12B ISO 606 16B - ISO 606 16B + ISO 606 16B ISO 606 20B - ISO 606 20B + ISO 606 20B ISO 606 24B - ISO 606 24B + ISO 606 24B @@ -4338,7 +4336,7 @@ Disponibile solo per fori senza filetto Hole depth - Hole depth + Profondità foro @@ -4359,17 +4357,17 @@ Disponibile solo per fori senza filetto Cut type for screw heads - Cut type for screw heads + Tipo di taglio per la testa della vite Check to override the values predefined by the 'Type' - Check to override the values predefined by the 'Type' + Seleziona per sovrascrivere i valori predefiniti dal 'Tipo' Custom values - Custom values + Valori personalizzati @@ -4419,15 +4417,15 @@ per la profondità dei fori ciechi 90 degree: straight hole under 90: smaller hole radius at the bottom over 90: larger hole radius at the bottom - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom + Angolo di svasatura per il foro +90°: foro dritto +<90°: restrizione sul fondo +>90°: allargamento sul fondo Reverses the hole direction - Reverses the hole direction + Invertire la direzione del foro diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm index fc26c3358e..16ca40f44b 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 607cd5f903..34592cc21c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -6,12 +6,12 @@ Involute gear... - Involute gear... + Complex tandwiel... Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + Maakt of bewerkt de complexe tandwieldefinitie. @@ -19,12 +19,12 @@ Sprocket... - Sprocket... + Tandwiel... Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Maakt of bewerkt de tandwieldefinitie. @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Drijfas ontwerp wizard... Start the shaft design wizard - Start the shaft design wizard + Begin met de drijfas ontwerp wizard @@ -45,42 +45,42 @@ Length [mm] - Length [mm] + Lengte [mm] Diameter [mm] - Diameter [mm] + Diameter [mm] Inner diameter [mm] - Inner diameter [mm] + Binnenste diameter [mm] Constraint type - Constraint type + Beperkingstype Start edge type - Start edge type + Begin randtype Start edge size - Start edge size + Begin randgrootte End edge type - End edge type + Einde randtype End edge size - End edge size + Begin randgrootte @@ -652,7 +652,7 @@ Sweep a selected sketch along a helix and remove it from the body - Sweep a selected sketch along a helix and remove it from the body + Veeg een geselecteerde schets langs een helix en verwijder het van het lichaam @@ -822,17 +822,17 @@ Edit ShapeBinder - Edit ShapeBinder + ShapeBinder bewerken Create ShapeBinder - Create ShapeBinder + ShapeBinder maken Create SubShapeBinder - Create SubShapeBinder + SubShapeBinder maken @@ -853,12 +853,12 @@ Create a new Sketch - Create a new Sketch + Maak een nieuwe schets Convert to MultiTransform feature - Convert to MultiTransform feature + Converteer naar Multi-Transformatie functie @@ -873,17 +873,17 @@ Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Migreer legacy onderdeel ontwerpfuncties naar lichamen Move tip to selected feature - Move tip to selected feature + Verplaats tip naar geselecteerde functie Duplicate a PartDesign object - Duplicate a PartDesign object + Dupliceer een PartDesign object @@ -893,7 +893,7 @@ Move an object inside tree - Move an object inside tree + Verplaats een object binnen de boom @@ -903,7 +903,7 @@ Make LinearPattern - Make LinearPattern + Lineair patroon maken @@ -1025,10 +1025,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + De gevraagde functie kan niet worden gemaakt. De reden kan zijn: + - het actieve lichaam bevat geen basisvorm, dus er is geen + materiaal om te verwijderen; + - de geselecteerde schets behoort niet tot de actieve lichaam. @@ -1039,10 +1039,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + De gevraagde functie kan niet worden gemaakt. De reden kan zijn: + - het actieve lichaam bevat geen basisvorm, dus er is geen + materiaal om te verwijderen; + - de geselecteerde schets behoort niet tot de actieve lichaam. @@ -1053,10 +1053,10 @@ - the active Body does not contain a base shape, so there is no material to be removed; - the selected sketch does not belong to the active Body. - The requested feature cannot be created. The reason may be that: - - the active Body does not contain a base shape, so there is no - material to be removed; - - the selected sketch does not belong to the active Body. + De gevraagde functie kan niet worden gemaakt. De reden kan zijn: + - het actieve lichaam bevat geen basisvorm, dus er is geen + materiaal om te verwijderen; + - de geselecteerde schets behoort niet tot de actieve lichaam. @@ -4505,12 +4505,12 @@ over 90: larger hole radius at the bottom Sprocket... - Sprocket... + Tandwiel... Involute gear... - Involute gear... + Complex tandwiel... diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm index 77760fb0c0..bf891d8505 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index 2534b5b200..c4e726d415 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -3016,7 +3016,7 @@ kliknij ponownie, aby zakończyć wybór Skin - Skóra + Powłoka diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index e4c01d2057..b37c2f08e1 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 83c8769d61..20a62b577f 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -6,12 +6,12 @@ Involute gear... - Эвольвентная передача... + Мастер проектирования шестерни с эвольвентным профилем... Creates or edit the involute gear definition. - Создание или редактирование свойств эвольвентной шестерни. + Создать или править свойства эвольвентной шестерни. @@ -19,12 +19,12 @@ Sprocket... - Звездочка... + Мастер проектирования цепного колеса (звёздочки)... Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Создать или отредактировать профиль цепного колеса. @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Мастер проектирования вала... Start the shaft design wizard - Start the shaft design wizard + Запускает мастер проектирования вала @@ -60,7 +60,7 @@ Constraint type - Constraint type + Тип ограничения @@ -111,12 +111,12 @@ Additive loft - Аддитивный лофт + Аддитивный профиль Loft a selected profile through other profile sections - Создание переходной формы между двумя и более эскизными контурами + Создает переходную форму между двумя и более эскизными контурами @@ -129,7 +129,7 @@ Additive pipe - Аддитивный сдвиг + Аддитивный профиль по траектории @@ -206,7 +206,7 @@ Chamfer the selected edges of a shape - Притупить фаской выбранные ребра фигуры + Добавить фаску на выбранные ребра фигуры @@ -242,7 +242,7 @@ Make a draft on a face - Сделать уклон грани + Сделать уклон граней @@ -435,7 +435,7 @@ Set tip - Установка кончика + Установить точку завершения расчета тела @@ -665,12 +665,12 @@ Subtractive loft - Субтрактивный лофт + Субтрактивный профиль Loft a selected profile through other profile sections and remove it from the body - Создание переходной формы между двумя и более эскизными контурами с дальнейшим вычитанием полученной фигуры из пересекаемого ею тела + Создает переходную форму между двумя и более эскизными контурами с дальнейшим вычитанием полученной фигуры из пересекаемого ею тела @@ -683,7 +683,7 @@ Subtractive pipe - Субтрактивный сдвиг + Субтрактивный профиль по траектории @@ -706,7 +706,7 @@ Make a thick solid - Создать полое тело + Преобразовать твердое тело в полое, с указанием толщины граней @@ -1642,12 +1642,12 @@ click again to end selection Pull direction - Направление вытягивания + Направление уклона Reverse pull direction - Развернуть направление вытягивания + Развернуть направление уклона @@ -2004,27 +2004,27 @@ click again to end selection ISO metric regular profile - ISO метрический грубый профиль + ISO метрическая резьба с крупным шагом ISO metric fine profile - ISO метрический тонкий профиль + ISO метрическая резьба с мелким шагом UTS coarse profile - UTC грубый профиль + UTC c грубым шагом UTS fine profile - UTC тонкий профиль + UTC с мелким шагом UTS extra fine profile - UTC экстра тонкий профиль + UTC с очень мелким шагом @@ -2140,7 +2140,7 @@ click again to end selection Loft parameters - Параметры лофта + Параметры профиля @@ -2589,7 +2589,7 @@ measured along the specified direction Pipe parameters - Параметры сдвига + Параметры траектории @@ -3011,7 +3011,7 @@ click again to end selection Join Type - Тип соединения + Форма граней @@ -3042,7 +3042,7 @@ click again to end selection Make thickness inwards - Расчет толщины внутрь + Наращивать стены внутрь тела @@ -3144,12 +3144,12 @@ click again to end selection Create an additive box by its width, height, and length - Create an additive box by its width, height, and length + Создать аддитивный параллелепипед, указав его ширину, высоту и длину Create an additive cylinder by its radius, height, and angle - Create an additive cylinder by its radius, height, and angle + Создать аддитивный цилиндр, указав его радиус, высоту и угол наклона @@ -3192,7 +3192,7 @@ click again to end selection Create a subtractive cylinder by its radius, height and angle - Создать субтрактивный цилиндр, указав его радиус, высоту и угол + Создать субтрактивный цилиндр, указав его радиус, высоту и угол наклона @@ -3364,12 +3364,12 @@ click again to end selection Cannot use this command as there is no solid to subtract from. - Cannot use this command as there is no solid to subtract from. + Невозможно применить данную команду, в связи с отсутствием твердого для вычитания формы. Ensure that the body contains a feature before attempting a subtractive command. - Ensure that the body contains a feature before attempting a subtractive command. + Убедитесь в том что тело содержит хоть какую-нибудь форму, перед попыткой применения субтрактивной команды. @@ -3384,12 +3384,12 @@ click again to end selection No sketch to work on - Нет эскиза для работы над ним + Не найден эскиз для работы с ним No sketch is available in the document - В документе нет эскизов + В документе отсутствуют эскизы для применения данного действия @@ -3443,12 +3443,12 @@ click again to end selection No valid features in this document - Отсутствуют допустимые детали в этом документе. + В документе не обнаружено тел с пригодными геометрическими формами . Please create a feature first. - Please create a feature first. + Создайте хоть какую-нибудь форму, прежде чем применить данную команду. @@ -3666,9 +3666,9 @@ This may lead to unexpected results. In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - Для использования верстака "Проектирование детали" необходимо активное тело в документе. Сделайте существующее тело активным (двойным кликом) или создайте новое тело. + Для использования верстака Part Design необходимо наличие активного тела в документе. Сделайте существующее тело активным (двойным кликом) или создайте новое тело. -Если у вас устаревший документ с объектами "Проектирование детали" без тела, то используйте функцию миграции в меню "Проектирование детали", чтобы вложить объекты в тело. +Если у вас устаревший документ содержащий объекты Part Design без тела, тогда используйте функцию миграции в меню "Проектирование детали", чтобы вложить объекты в тело. @@ -3768,7 +3768,7 @@ This feature is broken and can't be edited. Edit loft - Редактировать лофт + Редактировать профиль @@ -3778,7 +3778,7 @@ This feature is broken and can't be edited. Edit pipe - Редактировать сдвиг + Редактировать траекторию @@ -3870,7 +3870,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket parameter - Sprocket parameter + Параметры цепного колеса @@ -3880,7 +3880,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Sprocket Reference - Sprocket Reference + Стандарт цепного колеса: @@ -3920,47 +3920,47 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ANSI 100 - ANSI 100 + ANSI 100 ANSI 120 - ANSI 120 + ANSI 120 ANSI 140 - ANSI 140 + ANSI 140 ANSI 160 - ANSI 160 + ANSI 160 ANSI 180 - ANSI 180 + ANSI 180 ANSI 200 - ANSI 200 + ANSI 200 ANSI 240 - ANSI 240 + ANSI 240 Bicycle with Derailleur - Bicycle with Derailleur + Велосипедное с переключением скоростей Bicycle without Derailleur - Bicycle without Derailleur + Велосипедное без переключения скоростей @@ -4000,52 +4000,52 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Motorcycle 420 - Motorcycle 420 + Для мотоцикла 420 Motorcycle 425 - Motorcycle 425 + Для мотоцикла 425 Motorcycle 428 - Motorcycle 428 + Для мотоцикла 428 Motorcycle 520 - Motorcycle 520 + Для мотоцикла 520 Motorcycle 525 - Motorcycle 525 + Для мотоцикла 525 Motorcycle 530 - Motorcycle 530 + Для мотоцикла 530 Motorcycle 630 - Motorcycle 630 + Для мотоцикла 630 Chain Pitch: - Chain Pitch: + Шаг цепи: 0 in - 0 in + 0 в Roller Diameter: - Roller Diameter: + Диаметр ролика цепи: @@ -4212,12 +4212,12 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi Whether the hole gets a modelled thread - Whether the hole gets a modelled thread + Будет ли отверстие иметь смоделированную резьбу Model Thread - Model Thread + Отображать резьбу @@ -4234,23 +4234,23 @@ Note that the calculation can take some time Customize thread clearance - Customize thread clearance + Указать внутреннее отклонение диаметра резьбы Custom Thread Clearance - Custom Thread Clearance + Указать откл. диаметра Clearance - Clearance + Отклонение Custom Thread clearance value - Custom Thread clearance value + Значение внутреннего отклонения диаметра резьбы в мм @@ -4276,8 +4276,8 @@ Note that the calculation can take some time Hole clearance Only available for holes without thread - Hole clearance -Only available for holes without thread + Отверстие под резьбу +Доступно только для отверстий без резьбы @@ -4296,12 +4296,12 @@ Only available for holes without thread Wide - Wide + Wide (макс. допуск) Class - Класс + Поле допуска @@ -4317,7 +4317,7 @@ Only available for holes without thread Hole diameter - Hole diameter + Диаметр отверстия @@ -4339,12 +4339,12 @@ Only available for holes without thread Thread Depth - Thread Depth + Глубина резьбы Hole depth - Hole depth + На глубину дна @@ -4448,7 +4448,7 @@ over 90: larger hole radius at the bottom Loose - Loose + Loose (макс. допуск) @@ -4484,12 +4484,12 @@ over 90: larger hole radius at the bottom Create an additive feature - Create an additive feature + Аддитивные преобразования Create a subtractive feature - Create a subtractive feature + Субтрактивные преобразования @@ -4504,12 +4504,12 @@ over 90: larger hole radius at the bottom Sprocket... - Звездочка... + Мастер проектирования цепного колеса (звёздочки)... Involute gear... - Эвольвентная передача... + Мастер проектирования шестерни с эвольвентным профилем... diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm index e6dd858272..84619ec7f8 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index 11cbfca4c4..0be46a09ab 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -32,12 +32,12 @@ Shaft design wizard... - Shaft design wizard... + Mil tasarım sihirbazı... Start the shaft design wizard - Start the shaft design wizard + Mil tasarım sihirbazını başlat @@ -45,42 +45,42 @@ Length [mm] - Length [mm] + Uzunluk [mm] Diameter [mm] - Diameter [mm] + Çap [mm] Inner diameter [mm] - Inner diameter [mm] + İç çap [mm] Constraint type - Constraint type + Kısıtlama türü Start edge type - Start edge type + Başlangıç kenar tipi Start edge size - Start edge size + Başlangıç kenar boyutu End edge type - End edge type + Bitiş kenar tipi End edge size - End edge size + Bitiş kenar boyutu @@ -3809,7 +3809,7 @@ Bu özellik bozuk ve düzenlenemiyor. Select bound object - Select bound object + Sınır nesneyi seçin @@ -3851,9 +3851,9 @@ Bu özellik bozuk ve düzenlenemiyor. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design -> Migrate'. + Not: Geçiş İşlevini seçerseniz, dosyayı eski bir FreeCAD sürümüyle düzenleyemezsiniz. +Geçiş İşlevini reddederseniz, Gövdeler ve Parçalar gibi yeni ParçaTasarım özelliklerini kullanamazsınız. Sonuç olarak, parçalarınızı Montaj Çalışma Tezgahında kullanamazsınız. +Buna karşın, daha sonra istediğiniz an 'ParçaTasarımı->Geçiş...' 'Part Design-> Migrate'. menüsü ile geçiş işlevini gerçekleştirebilirsiniz. diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts index 255883d9fc..53fa4a7011 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. + + + The library to use to generate the path + المكتبة ليتم استخدامها لتوليد المسار + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object مادة لهذا الكائن + + + Controls how tool moves around corners. Default=Round + يتحكم في كيفية تحرك الأداة حول الزوايا. افتراضي = جولة + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - المكتبة ليتم استخدامها لتوليد المسار + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - يتحكم في كيفية تحرك الأداة حول الزوايا. افتراضي = جولة + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object المرجو اختيار عنصر مسار + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + العنصر الذي قمت باختياره ليس عبارة عن مسار + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - العنصر الذي قمت باختياره ليس عبارة عن مسار - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_bg.ts b/src/Mod/Path/Gui/Resources/translations/Path_bg.ts index 7e094ac436..349f95a6ee 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_bg.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_bg.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Показване на временните обекти за изграждане на пътеки, когато модулът е в режим DEBUG. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. По -малките стойности дават по -фина и по -точна мрежа. По -малките стойности не увеличават много времето за обработка. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Стоп индекс (ъгъл) за ротационно сканиране - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Библиотеката, с която ще се генерира траекторията + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Материал за този обект + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Библиотеката, с която ще се генерира траекторията + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Няколко лица в базовата геометрия. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Няколко лица в базовата геометрия. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Форма на джоба + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Форма на джоба - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Таблица с инструменти JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Таблица с инструменти HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Таблица с инструменти LinuxCNC (*.tbl) + Open tooltable Отваряне на таблица с инструменти + + + Save tooltable + Запис на таблица с инструменти + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Запис на таблица с инструменти - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Таблица с инструменти JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Таблица с инструменти HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Таблица с инструменти LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index ead128748d..98afc9c739 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - The direction along which dropcutter lines are created - La direcció al llarg de la qual es creen les línies dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - - Step over percentage of the drop cutter path - Pas sobre el percentatge de la trajectòria del dropcutter - - - - Z-axis offset from the surface of the object - Separació de l'eix Z de la superfície de l'objecte - - - - The Sample Interval. Small values cause long wait times - L'interval de mostra. Els valors petits causen una llarga espera - - - - Enable optimization which removes unnecessary points from G-Code output - Activa l'optimització que suprimeixi els punts innecessaris del resultat G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Els valors més petits produeixen una malla més fina i precisa. Els valors més petits no augmenten massa el temps de processament. - - - The completion mode for the operation: single or multi-pass - Mode de compleció per a l'operació: únic o múltiples passos - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - Stop index(angle) for rotational scan Atura l'índex(angle) per a l'escàner rotacional - - - Ignore areas that proceed below specified depth. - Ignora les àrees que passen per davall d'una profunditat especificada. - - - - Depth used to identify waste areas to ignore. - Profunditat utilitzada per a identificar àmplies àrees a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Retalla els residus fins al fons en la vora del model, alliberant-lo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material per a aquest objecte + + + Controls how tool moves around corners. Default=Round + Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The direction along which dropcutter lines are created + La direcció al llarg de la qual es creen les línies dropcutter - - Controls how tool moves around corners. Default=Round - Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + + Should the operation be limited by the stock object or by the bounding box of the base object + En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base + + + + Step over percentage of the drop cutter path + Pas sobre el percentatge de la trajectòria del dropcutter + + + + Z-axis offset from the surface of the object + Separació de l'eix Z de la superfície de l'objecte + + + + The Sample Interval. Small values cause long wait times + L'interval de mostra. Els valors petits causen una llarga espera + + + + Enable optimization which removes unnecessary points from G-Code output + Activa l'optimització que suprimeixi els punts innecessaris del resultat G-Code + + + + The completion mode for the operation: single or multi-pass + Mode de compleció per a l'operació: únic o múltiples passos + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) + + + + Ignore areas that proceed below specified depth. + Ignora les àrees que passen per davall d'una profunditat especificada. + + + + Depth used to identify waste areas to ignore. + Profunditat utilitzada per a identificar àmplies àrees a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Retalla els residus fins al fons en la vora del model, alliberant-lo. + + + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. La característica %s.%s no es pot processar com a forat circular; suprimiu-la de la llista de la geometria de base. + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ S'ha incrementat fins al valor de dalt. Selected feature(s) require 'Enable Rotation: B(y)' for access. Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - Ignoring non-horizontal Face @@ -1991,6 +1991,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma de Buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares + Normal @@ -2041,16 +2051,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma de Buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares - 3D Pocket @@ -2183,16 +2183,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Face Profile Perfil de cara - - - For open edges, verify Final Depth for this operation. - Verifiqueu la Profunditat final per les arestes obertes. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + Verifiqueu la Profunditat final per les arestes obertes. + Profile based on face or faces @@ -3461,16 +3461,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3488,6 +3478,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3960,6 +3960,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3975,12 +3981,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4227,11 +4227,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Sanity - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - Check the path job for common errors @@ -4482,6 +4477,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Date Data + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4637,6 +4637,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4647,11 +4652,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afegeix un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4678,6 +4678,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Crea una línia central de gravat + + + VCarve requires an engraving cutter with CuttingEdgeAngle + L'eina de gravat en V necessita una +punta de tall amb «CuttingEdgeAngle» + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4688,12 +4694,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. L'angle de la punta de tall del gravador ha de ser < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - L'eina de gravat en V necessita una -punta de tall amb «CuttingEdgeAngle» - Path_Waterline @@ -4728,11 +4728,56 @@ punta de tall amb «CuttingEdgeAngle» Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afegeix una taula d'eines nova + + + + Delete Selected Tool Table + Esborra la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4943,11 +4988,6 @@ punta de tall amb «CuttingEdgeAngle» Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4963,46 +5003,6 @@ punta de tall amb «CuttingEdgeAngle» Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afegeix una taula d'eines nova - - - - Delete Selected Tool Table - Esborra la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index 41b263f0b7..04e483a4ad 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Zobrazit dočasnou cestu konstrukčních objektů když je modul v režimu LADĚNÍ. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Pokud je operace omezena objektem polotovaru nebo ohraničeným objektem základního objektu - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Menší hodnoty přinášejí jemnější a přesnější síť. Menší hodnoty nezvyšují čas zpracování. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Zastavit indexování (úhel) pro rotační skenování - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Cesta ke kopírování - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Knihovna použitá k vytvoření cesty + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Materiál objektu + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Knihovna použitá k vytvoření cesty + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Pokud je operace omezena objektem polotovaru nebo ohraničeným objektem základního objektu + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Vybraný nástroj není vrták - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Zvýšeno na vrch polotovaru. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tvar kapsy + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Tvar kapsy - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Číslo nástroje pro načtení + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Číslo nástroje pro načtení - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Uložit knihovnu nástrojů + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otevřít tabulku nástrojů + + + Save tooltable + Uložit tabulku nástrojů + + + + Rename Tooltable + Přejmenovat tabulku nástrojů + + + + Enter Name: + Zadejte jméno: + + + + Add New Tool Table + Přidat novou tabulku nástrojů + + + + Delete Selected Tool Table + Odstranit vybranou tabulku nástrojů + + + + Rename Selected Tool Table + Přejmenovat vybranou tabulku nástrojů + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabulka nástrojů XML (*.xml);;;Tabulka nástrojů HeeksCAD (*.tooltable) - - - Save tooltable - Uložit tabulku nástrojů - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Přejmenovat tabulku nástrojů - - - - Enter Name: - Zadejte jméno: - - - - Add New Tool Table - Přidat novou tabulku nástrojů - - - - Delete Selected Tool Table - Odstranit vybranou tabulku nástrojů - - - - Rename Selected Tool Table - Přejmenovat vybranou tabulku nástrojů - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index a02dfc8ea1..abd354da1e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Zeigt im DEBUG-Modus den temporären Objekte Pfad-konstruktion. - - - The direction along which dropcutter lines are created - Die Richtung, entlang der Drop-Cutter Bahnen erstellt werden - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Soll die Operation durch das Grundobjekt oder durch die Begrenzungsbox des Basisobjekts eingeschränkt werden - - - - Step over percentage of the drop cutter path - Überlappung des Drop-Cutter Pfads in Prozent - - - - Z-axis offset from the surface of the object - Z-Achsenversatz von der Oberfläche des Objekts - - - - The Sample Interval. Small values cause long wait times - Das Abtastintervall. Kleine Werte führen zu langer Wartezeit - - - - Enable optimization which removes unnecessary points from G-Code output - Aktivieren Sie die Optimierung, um unnötige Punkte aus der G-Code-Ausgabe zu entfernen - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Kleinere Werte liefern ein feineres, genaueres Netz. Geringere Werte erhöhen die Verarbeitungszeit unerheblich. - - - The completion mode for the operation: single or multi-pass - Der Vervollständigungsmodus für die Operation: einfach oder mehrfach - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) - Stop index(angle) for rotational scan Stopp-Index(Winkel) für Rotationssuche - - - Ignore areas that proceed below specified depth. - Ignoriere Bereiche, die unterhalb der angegebenen Tiefe fortfahren. - - - - Depth used to identify waste areas to ignore. - Tiefe zum Ermitteln von überschüssigen Flächen, um diese auszulassen. - - - - Cut through waste to depth at model edge, releasing the model. - Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Der zu kopierende Pfad - - - The base geometry of this toolpath - Die Basis-Geometrie dieses Werkzeugweges - The tool controller that will be used to calculate the path @@ -570,6 +510,11 @@ nur unwesentlich. Extra offset to apply to the operation. Direction is operation dependent. Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. + + + The library to use to generate the path + Algorithmus zum berechnen des Werkzeugweges + Start pocketing at center or boundary @@ -670,6 +615,11 @@ nur unwesentlich. A material for this object Ein Material für dieses Objekt + + + Controls how tool moves around corners. Default=Round + Kontrolliert wie sich das Werkzeug um Ecken bewegt. Standard=rund + Maximum distance before a miter join is truncated @@ -701,14 +651,64 @@ nur unwesentlich. Auf Wahr setzen, wenn die Fräser-Radiuskompensation verwendet werden soll - - The library to use to generate the path - Algorithmus zum berechnen des Werkzeugweges + + The direction along which dropcutter lines are created + Die Richtung, entlang der Drop-Cutter Bahnen erstellt werden - - Controls how tool moves around corners. Default=Round - Kontrolliert wie sich das Werkzeug um Ecken bewegt. Standard=rund + + Should the operation be limited by the stock object or by the bounding box of the base object + Soll die Operation durch das Grundobjekt oder durch die Begrenzungsbox des Basisobjekts eingeschränkt werden + + + + Step over percentage of the drop cutter path + Überlappung des Drop-Cutter Pfads in Prozent + + + + Z-axis offset from the surface of the object + Z-Achsenversatz von der Oberfläche des Objekts + + + + The Sample Interval. Small values cause long wait times + Das Abtastintervall. Kleine Werte führen zu langer Wartezeit + + + + Enable optimization which removes unnecessary points from G-Code output + Aktivieren Sie die Optimierung, um unnötige Punkte aus der G-Code-Ausgabe zu entfernen + + + + The completion mode for the operation: single or multi-pass + Der Vervollständigungsmodus für die Operation: einfach oder mehrfach + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) + + + + Ignore areas that proceed below specified depth. + Ignoriere Bereiche, die unterhalb der angegebenen Tiefe fortfahren. + + + + Depth used to identify waste areas to ignore. + Tiefe zum Ermitteln von überschüssigen Flächen, um diese auszulassen. + + + + Cut through waste to depth at model edge, releasing the model. + Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. + + + + The base geometry of this toolpath + Die Basis-Geometrie dieses Werkzeugweges @@ -988,16 +988,16 @@ nur unwesentlich. Selected tool is not a drill Ausgewähltes Werkzeug ist kein Bohrer - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ungültiger Schneidenwinkel %.2f muß < 90° und > = 0° sein + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1123,6 +1123,31 @@ nur unwesentlich. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Funktion %s.%s lässt sich nicht als ein kreisrundes Loch verarbeiten - bitte aus der Basisgeometrie-Liste entfernen. + + + Face appears misaligned after initial rotation. + Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. + + + + Multiple faces in Base Geometry. + Mehrere Oberflächen in der Basisgeometrie. + + + + Depth settings will be applied to all faces. + Tiefeneinstellungen werden auf alle Teilflächen angewendet. + + + + EnableRotation property is 'Off'. + Die Eigenschaft "Rotation zulassen" ist deaktiviert. + Unable to create path for face(s). @@ -1220,31 +1245,6 @@ Wurde auf Grundkörperoberseite erhöht. Selected feature(s) require 'Enable Rotation: B(y)' for access. Ausgewählte(s) Element(e) benötigt 'Erlaube Rotation B(y)' für die Erreichbarkeit. - - - Face appears misaligned after initial rotation. - Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. - - - - Multiple faces in Base Geometry. - Mehrere Oberflächen in der Basisgeometrie. - - - - Depth settings will be applied to all faces. - Tiefeneinstellungen werden auf alle Teilflächen angewendet. - - - - EnableRotation property is 'Off'. - Die Eigenschaft "Rotation zulassen" ist deaktiviert. - Ignoring non-horizontal Face @@ -1994,6 +1994,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathPocket + + + Pocket Shape + Taschenform + + + + Creates a Path Pocket object from a face or faces + Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen + Normal @@ -2044,16 +2054,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Final depth set below ZMin of face(s) selected. Gesamttiefe unter ZMin von Fläche(n) ausgewählt. - - - Pocket Shape - Taschenform - - - - Creates a Path Pocket object from a face or faces - Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen - 3D Pocket @@ -2187,16 +2187,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Face Profile Flächen-Profil - - - For open edges, verify Final Depth for this operation. - Überprüfen Sie die endgültige Tiefe für diese Operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Prüfe die Kantenauswahl und die Anforderungen an die Endtiefe für die Profilerstellung der offenen Kanten. + + + For open edges, verify Final Depth for this operation. + Überprüfen Sie die endgültige Tiefe für diese Operation. + Profile based on face or faces @@ -3467,16 +3467,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Dressup - - - Dress-up - Erweiterung - - - - Creates a Path Dess-up object from a selected path - Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn - Please select one path object @@ -3496,6 +3486,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Please select a Path object Bitte wählen Sie ein Pfadobjekt + + + Dress-up + Erweiterung + + + + Creates a Path Dess-up object from a selected path + Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn + Path_DressupAxisMap @@ -3968,6 +3968,13 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Hop object Erzeugt ein Bewegungsbahn Sprung Objekt + + + The selected object is not a path + + Das ausgewählte Objekt ist keine Bewegungsbahn + + Please select one path object @@ -3983,13 +3990,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Hop Erzeuge Sprung - - - The selected object is not a path - - Das ausgewählte Objekt ist keine Bewegungsbahn - - Path_Inspect @@ -4239,11 +4239,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Sanity - - - The Job has no selected Base object. - Dem Job wurde kein Basisobjekt zugeordnet. - Check the path job for common errors @@ -4494,6 +4489,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Date Datum + + + The Job has no selected Base object. + Dem Job wurde kein Basisobjekt zugeordnet. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4649,6 +4649,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_ToolController + + + Tool Number to Load + Lade Werkzeugnummer + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Add Tool Controller Werkzeug Kontroller bearbeiten - - - Tool Number to Load - Lade Werkzeugnummer - Path_ToolTable @@ -4690,6 +4690,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a medial line engraving path Erstellt einen medialen Liniengravurpfad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Engraver Cutting Edge Angle must be < 180 degrees. Gravur Schneitkantenwinkel muss < 180 Grad sein. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel - Path_Waterline @@ -4739,11 +4739,56 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Save toolbit library Werkzeugbibliothek speichern + + + Tooltable JSON (*.json) + Werkzeugtabelle JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Werkzeugtabelle (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Werkzeugtabelle (*.tbl) + Open tooltable Werkzeugtabelle öffnen + + + Save tooltable + Werkzeugtabelle speichern + + + + Rename Tooltable + Werkzeugtabelle umbenennen + + + + Enter Name: + Name eingeben: + + + + Add New Tool Table + Neue Werkzeugtabelle hinzufügen + + + + Delete Selected Tool Table + Ausgewählte Werkzeugtabelle löschen + + + + Rename Selected Tool Table + Ausgewählte Werkzeugtabelle umbenennen + Tooltable editor @@ -4954,11 +4999,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Werkzeugtabelle XML (XML); HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Werkzeugtabelle speichern - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Object doesn't have a tooltable property Objekt besitzt keine Eigenschaft "Werkzeugtabelle" - - - Rename Tooltable - Werkzeugtabelle umbenennen - - - - Enter Name: - Name eingeben: - - - - Add New Tool Table - Neue Werkzeugtabelle hinzufügen - - - - Delete Selected Tool Table - Ausgewählte Werkzeugtabelle löschen - - - - Rename Selected Tool Table - Ausgewählte Werkzeugtabelle umbenennen - - - - Tooltable JSON (*.json) - Werkzeugtabelle JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Werkzeugtabelle (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Werkzeugtabelle (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index 9e8157c398..8f36cf86ed 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - Το Διάστημα Δειγματοληψίας. Η χρήση μικρών τιμών επιφέρει μεγάλους χρόνους αναμονής - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Η διαδρομή προς αντιγραφή - - - The base geometry of this toolpath - Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. + + + The library to use to generate the path + Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Ένα υλικό για αυτό το αντικείμενο + + + Controls how tool moves around corners. Default=Round + Ελέγχει τον τρόπο με τον οποίο το εργαλείο κινείται γύρω από τις γωνίες. Προεπιλογή=Κυκλικά + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Ελέγχει τον τρόπο με τον οποίο το εργαλείο κινείται γύρω από τις γωνίες. Προεπιλογή=Κυκλικά + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + Το Διάστημα Δειγματοληψίας. Η χρήση μικρών τιμών επιφέρει μεγάλους χρόνους αναμονής + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Μη Έγκυρη Γωνία Περικοπής Ακμής %.2f, πρέπει να είναι <90° και >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Το χαρακτηριστικό %s.%s δεν δύναται να υποστεί επεξεργασία ως κυκλική οπή - παρακαλώ αφαιρέστε το από την λίστα γεωμετρίας Βάσης. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Σχήμα Εσοχής + + + + Creates a Path Pocket object from a face or faces + Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Σχήμα Εσοχής - - - - Creates a Path Pocket object from a face or faces - Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Προφίλ Όψης - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Αναδιαμόρφωση - - - - Creates a Path Dess-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής + + + Dress-up + Αναδιαμόρφωση + + + + Creates a Path Dess-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Δημιουργεί μια Διαδρομή Άλματος + + + The selected object is not a path + + Το επιλεγμένο αντικείμενο δεν είναι διαδρομή + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Δημιουργήστε Άλμα - - - The selected object is not a path - - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Αριθμός Εργαλείου προς Φόρτωση + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Προσθέστε Ελεγκτή Εργαλείων - - - Tool Number to Load - Αριθμός Εργαλείου προς Φόρτωση - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Πίνακας εργαλείων JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Πίνακας εργαλείων HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Πίνακας εργαλείων LinuxCNC (*.tbl) + Open tooltable Άνοιγμα πίνακα εργαλείων + + + Save tooltable + Αποθήκευση πίνακα εργαλείων + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Πίνακας εργαλείων XML (*.xml);; Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - Save tooltable - Αποθήκευση πίνακα εργαλείων - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Το αντικείμενο δεν έχει κάποια ιδιότητα πίνακα εργαλείων - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Πίνακας εργαλείων JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Πίνακας εργαλείων LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts index ce31f6c5a5..199950a38f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Muestra los objetos de construcción de ruta temporal cuando el módulo está en modo DEBUG. - - - The direction along which dropcutter lines are created - La dirección a lo largo de la cual se crean las líneas del dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base - - - - Step over percentage of the drop cutter path - Paso sobre el porcentaje de la trayectoria del dropcutter - - - - Z-axis offset from the surface of the object - Desplazamiento del eje Z desde la superficie del objeto - - - - The Sample Interval. Small values cause long wait times - El intervalo de muestra. Valores pequeños causan tiempos de espera largos - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. - - - The completion mode for the operation: single or multi-pass - El modo de finalización para la operación: single o multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) - Stop index(angle) for rotational scan Detener índice(ángulo) para el escaneo rotativo - - - Ignore areas that proceed below specified depth. - Ignore las áreas que proceden por debajo de la profundidad especificada. - - - - Depth used to identify waste areas to ignore. - Profundidad usada para identificar las áreas residuales a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied La trayectoria a ser copiada - - - The base geometry of this toolpath - La geometría base de esta trayectoria de herramienta - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. + + + The library to use to generate the path + La biblioteca a usar para generar la trayectoria + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material para este objeto + + + Controls how tool moves around corners. Default=Round + Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Hacer verdadero, sí se utiliza la compensación de cortador de radio - - The library to use to generate the path - La biblioteca a usar para generar la trayectoria + + The direction along which dropcutter lines are created + La dirección a lo largo de la cual se crean las líneas del dropcutter - - Controls how tool moves around corners. Default=Round - Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo + + Should the operation be limited by the stock object or by the bounding box of the base object + En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base + + + + Step over percentage of the drop cutter path + Paso sobre el porcentaje de la trayectoria del dropcutter + + + + Z-axis offset from the surface of the object + Desplazamiento del eje Z desde la superficie del objeto + + + + The Sample Interval. Small values cause long wait times + El intervalo de muestra. Valores pequeños causan tiempos de espera largos + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code + + + + The completion mode for the operation: single or multi-pass + El modo de finalización para la operación: single o multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) + + + + Ignore areas that proceed below specified depth. + Ignore las áreas que proceden por debajo de la profundidad especificada. + + + + Depth used to identify waste areas to ignore. + Profundidad usada para identificar las áreas residuales a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. + + + + The base geometry of this toolpath + La geometría base de esta trayectoria de herramienta @@ -986,16 +986,16 @@ Selected tool is not a drill La herramienta seleccionada no es perforar - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. %s.%s función no puede ser procesada como un agujero circular - por favor eliminar de la lista de Base de la geometría. + + + Face appears misaligned after initial rotation. + La cara parece estar mal alineada después de la rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar la propiedad 'InverseAngle' y volver a calcular. + + + + Multiple faces in Base Geometry. + Multiples caras en Geometría Base. + + + + Depth settings will be applied to all faces. + La configuración de profundidad se aplicará a todas las caras. + + + + EnableRotation property is 'Off'. + La Propiedad ActivarRotacion es 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Aumenta hasta el valor superior. Selected feature(s) require 'Enable Rotation: B(y)' for access. Característica(s) seleccionada(s) requieren 'Activar Rotación: B(y)' para acceso. - - - Face appears misaligned after initial rotation. - La cara parece estar mal alineada después de la rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar la propiedad 'InverseAngle' y volver a calcular. - - - - Multiple faces in Base Geometry. - Multiples caras en Geometría Base. - - - - Depth settings will be applied to all faces. - La configuración de profundidad se aplicará a todas las caras. - - - - EnableRotation property is 'Off'. - La Propiedad ActivarRotacion es 'Off'. - Ignoring non-horizontal Face @@ -1992,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de Desvaste + + + + Creates a Path Pocket object from a face or faces + Crea la trayectoria de un objeto de vaciado desde una cara o caras + Normal @@ -2042,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). - - - Pocket Shape - Forma de Desvaste - - - - Creates a Path Pocket object from a face or faces - Crea la trayectoria de un objeto de vaciado desde una cara o caras - 3D Pocket @@ -2185,16 +2185,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Perfil de Cara - - - For open edges, verify Final Depth for this operation. - Para los bordes abiertos, verifique la Profundidad Final para esta operación. - Check edge selection and Final Depth requirements for profiling open edge(s). Compruebe la selección de bordes y los requisitos de Profundidad Final para los perfiles de los bordes abiertos. + + + For open edges, verify Final Depth for this operation. + Para los bordes abiertos, verifique la Profundidad Final para esta operación. + Profile based on face or faces @@ -3473,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Disfrazar - - - - Creates a Path Dess-up object from a selected path - Crea un objeto Dress-up de ruta con la trayectoria seleccionada - Please select one path object @@ -3502,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor seleccione un objeto de trayectoria + + + Dress-up + Disfrazar + + + + Creates a Path Dess-up object from a selected path + Crea un objeto Dress-up de ruta con la trayectoria seleccionada + Path_DressupAxisMap @@ -3974,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objeto de salto de trayectoria + + + The selected object is not a path + + El objeto seleccionado no es una trayectoria + + Please select one path object @@ -3989,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crear Salto - - - The selected object is not a path - - El objeto seleccionado no es una trayectoria - - Path_Inspect @@ -4245,11 +4245,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - El trabajo no tiene objeto base seleccionado. - Check the path job for common errors @@ -4500,6 +4495,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Fecha + + + The Job has no selected Base object. + El trabajo no tiene objeto base seleccionado. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número de herramienta a carga + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Agregar Controlador de Herramienta - - - Tool Number to Load - Número de herramienta a carga - Path_ToolTable @@ -4702,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea una ruta de grabado de línea medial + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requiere una cortadora de grabado con CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Angulo de borde de corte del grabador debe ser < 180 grados. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requiere una cortadora de grabado con CuttingEdgeAngle - Path_Waterline @@ -4751,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Guardar librería "toolbit" + + + Tooltable JSON (*.json) + Tabla de herramientas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabla de herramientas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabla de herramientas LinuxCNC (*.tbl) + Open tooltable Abierta mesa de herramientas + + + Save tooltable + Guardar mesa de herramienta + + + + Rename Tooltable + Renombrar Tabla de Herramientas + + + + Enter Name: + Ingresar Nombre: + + + + Add New Tool Table + Añadir nueva tabla de herramientas + + + + Delete Selected Tool Table + Eliminar Tabla de Herramientas Seleccionada + + + + Rename Selected Tool Table + Renombrar Tabla de Herramientas Seleccionada + Tooltable editor @@ -4966,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) - - - Save tooltable - Guardar mesa de herramienta - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property El Objeto no tiene una propiedad de mesa de herramienta - - - Rename Tooltable - Renombrar Tabla de Herramientas - - - - Enter Name: - Ingresar Nombre: - - - - Add New Tool Table - Añadir nueva tabla de herramientas - - - - Delete Selected Tool Table - Eliminar Tabla de Herramientas Seleccionada - - - - Rename Selected Tool Table - Renombrar Tabla de Herramientas Seleccionada - - - - Tooltable JSON (*.json) - Tabla de herramientas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabla de herramientas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabla de herramientas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 81fa9d013c..748fce0918 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostrar los objetos temporales de construcción de rutas cuando el módulo está en modo DEBUG. - - - The direction along which dropcutter lines are created - La dirección a lo largo de la cual se crean las líneas del dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base - - - - Step over percentage of the drop cutter path - Paso sobre el porcentaje de la trayectoria del dropcutter - - - - Z-axis offset from the surface of the object - Desplazamiento del eje Z desde la superficie del objeto - - - - The Sample Interval. Small values cause long wait times - El intervalo de muestra. Valores pequeños causan tiempos de espera largos - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. - - - The completion mode for the operation: single or multi-pass - El modo de finalización para la operación: single o multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) - Stop index(angle) for rotational scan Detener índice(ángulo) para el escaneo rotativo - - - Ignore areas that proceed below specified depth. - Ignore las áreas que proceden por debajo de la profundidad especificada. - - - - Depth used to identify waste areas to ignore. - Profundidad usada para identificar las áreas residuales a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied La trayectoria a ser copiada - - - The base geometry of this toolpath - La geometría base de esta trayectoria de herramienta - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. + + + The library to use to generate the path + La biblioteca a usar para generar la trayectoria + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material para este objeto + + + Controls how tool moves around corners. Default=Round + Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Hacer verdadero, sí se utiliza la compensación de cortador de radio - - The library to use to generate the path - La biblioteca a usar para generar la trayectoria + + The direction along which dropcutter lines are created + La dirección a lo largo de la cual se crean las líneas del dropcutter - - Controls how tool moves around corners. Default=Round - Controla cómo se mueve la herramienta en las esquinas. Por defecto = Redondo + + Should the operation be limited by the stock object or by the bounding box of the base object + En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base + + + + Step over percentage of the drop cutter path + Paso sobre el porcentaje de la trayectoria del dropcutter + + + + Z-axis offset from the surface of the object + Desplazamiento del eje Z desde la superficie del objeto + + + + The Sample Interval. Small values cause long wait times + El intervalo de muestra. Valores pequeños causan tiempos de espera largos + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code + + + + The completion mode for the operation: single or multi-pass + El modo de finalización para la operación: single o multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) + + + + Ignore areas that proceed below specified depth. + Ignore las áreas que proceden por debajo de la profundidad especificada. + + + + Depth used to identify waste areas to ignore. + Profundidad usada para identificar las áreas residuales a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. + + + + The base geometry of this toolpath + La geometría base de esta trayectoria de herramienta @@ -986,16 +986,16 @@ Selected tool is not a drill La herramienta seleccionada no es un taladro - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. %s.%s función no puede ser procesada como un agujero circular - por favor eliminar de la lista de Base de la geometría. + + + Face appears misaligned after initial rotation. + La cara parece estar mal alineada después de la rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar la propiedad 'InverseAngle' y volver a calcular. + + + + Multiple faces in Base Geometry. + Multiples caras en Geometría Base. + + + + Depth settings will be applied to all faces. + La configuración de profundidad se aplicará a todas las caras. + + + + EnableRotation property is 'Off'. + La Propiedad ActivarRotacion es 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Aumenta hasta el valor superior. Selected feature(s) require 'Enable Rotation: B(y)' for access. Característica(s) seleccionada(s) requieren 'Activar Rotación: B(y)' para acceso. - - - Face appears misaligned after initial rotation. - La cara parece estar mal alineada después de la rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar la propiedad 'InverseAngle' y volver a calcular. - - - - Multiple faces in Base Geometry. - Multiples caras en Geometría Base. - - - - Depth settings will be applied to all faces. - La configuración de profundidad se aplicará a todas las caras. - - - - EnableRotation property is 'Off'. - La Propiedad ActivarRotacion es 'Off'. - Ignoring non-horizontal Face @@ -1992,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de Vaciado + + + + Creates a Path Pocket object from a face or faces + Crea la trayectoria de un objeto de vaciado desde una cara o caras + Normal @@ -2042,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). - - - Pocket Shape - Forma de Vaciado - - - - Creates a Path Pocket object from a face or faces - Crea la trayectoria de un objeto de vaciado desde una cara o caras - 3D Pocket @@ -2185,16 +2185,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Perfil de Cara - - - For open edges, verify Final Depth for this operation. - Para los bordes abiertos, verifique la Profundidad Final para esta operación. - Check edge selection and Final Depth requirements for profiling open edge(s). Compruebe la selección de bordes y los requisitos de Profundidad Final para los perfiles de los bordes abiertos. + + + For open edges, verify Final Depth for this operation. + Para los bordes abiertos, verifique la Profundidad Final para esta operación. + Profile based on face or faces @@ -3473,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Disfrazar - - - - Creates a Path Dess-up object from a selected path - Crea un objeto Dress-up de ruta con la trayectoria seleccionada - Please select one path object @@ -3502,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor seleccione un objeto de trayectoria + + + Dress-up + Disfrazar + + + + Creates a Path Dess-up object from a selected path + Crea un objeto Dress-up de ruta con la trayectoria seleccionada + Path_DressupAxisMap @@ -3974,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objeto de salto de trayectoria + + + The selected object is not a path + + El objeto seleccionado no es una trayectoria + + Please select one path object @@ -3989,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crear Salto - - - The selected object is not a path - - El objeto seleccionado no es una trayectoria - - Path_Inspect @@ -4245,11 +4245,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - El trabajo no tiene objeto base seleccionado. - Check the path job for common errors @@ -4500,6 +4495,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Fecha + + + The Job has no selected Base object. + El trabajo no tiene objeto base seleccionado. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número de herramienta a carga + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Añadir Controlador de Herramienta - - - Tool Number to Load - Número de herramienta a carga - Path_ToolTable @@ -4702,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea una ruta de grabado de línea medial + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requiere una cortadora de grabado con CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Angulo de borde de corte del grabador debe ser < 180 grados. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requiere una cortadora de grabado con CuttingEdgeAngle - Path_Waterline @@ -4751,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Guardar librería "toolbit" + + + Tooltable JSON (*.json) + Tabla de herramientas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabla de herramientas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabla de herramientas LinuxCNC (*.tbl) + Open tooltable Abierta mesa de herramientas + + + Save tooltable + Guardar mesa de herramienta + + + + Rename Tooltable + Renombrar Tabla de Herramientas + + + + Enter Name: + Introducir nombre: + + + + Add New Tool Table + Añadir nueva tabla de herramientas + + + + Delete Selected Tool Table + Eliminar Tabla de Herramientas Seleccionada + + + + Rename Selected Tool Table + Renombrar Tabla de Herramientas Seleccionada + Tooltable editor @@ -4966,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) - - - Save tooltable - Guardar mesa de herramienta - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property El Objeto no tiene una propiedad de mesa de herramienta - - - Rename Tooltable - Renombrar Tabla de Herramientas - - - - Enter Name: - Introducir nombre: - - - - Add New Tool Table - Añadir nueva tabla de herramientas - - - - Delete Selected Tool Table - Eliminar Tabla de Herramientas Seleccionada - - - - Rename Selected Tool Table - Renombrar Tabla de Herramientas Seleccionada - - - - Tooltable JSON (*.json) - Tabla de herramientas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabla de herramientas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabla de herramientas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm index 66ece6c802..515cd6a9ea 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index 9933334b5f..124bda5335 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Erakutsi aldi baterako bide-eraikuntzaren objektuak modulua ARAZKETA moduan dagoenean. - - - The direction along which dropcutter lines are created - Erortze-ebakigailuaren lerroak zein norabidetan sortuko diren - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Eragiketa objektu gordinak ala oinarri-objektuaren muga-kutxak mugatuko duen - - - - Step over percentage of the drop cutter path - Erortze-ebakigailuaren bidearen ehunekoaren gaineko urratsa - - - - Z-axis offset from the surface of the object - Z ardatzeko desplazamendua objektuaren gainazaletik - - - - The Sample Interval. Small values cause long wait times - Laginketa-tartea. Balio txikiek itxarote-denbora luzeak eragiten dituzte - - - - Enable optimization which removes unnecessary points from G-Code output - Gaitu optimizazioa, beharrezkoak ez diren puntuak G-Code irteeratik kentzeko - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Balio txikiagoek amaraun estuago eta zehatzagoa sortzen dute. Balio txikiagoek ez dute prozesatze-denbora asko handitzen. - - - The completion mode for the operation: single or multi-pass - Eragiketa osatzeko modua: pasaldi bakarrean edo anitzetan - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka - Stop index(angle) for rotational scan Gelditzeko indizea (angelua) biraketa-eskaneatzerako - - - Ignore areas that proceed below specified depth. - Ezikusi adierazitako sakoneraren azpitik dauden areak. - - - - Depth used to identify waste areas to ignore. - Ezikusiko diren hondar-areak identifikatzeko erabiliko den sakonera. - - - - Cut through waste to depth at model edge, releasing the model. - Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Kopiatuko den bidea - - - The base geometry of this toolpath - Tresna-bide honen oinarri-geometria - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. + + + The library to use to generate the path + Bidea sortzeko erabiliko den liburutegia + Start pocketing at center or boundary @@ -616,17 +561,17 @@ The spacing between the array copies in Linear pattern - The spacing between the array copies in Linear pattern + Matrize-kopien arteko tartea eredu linealean The number of copies in X direction in Linear pattern - The number of copies in X direction in Linear pattern + X norabidean dagoen kopia kopurua eredu linealean The number of copies in Y direction in Linear pattern - The number of copies in Y direction in Linear pattern + Y norabidean dagoen kopia kopurua eredu linealean @@ -636,7 +581,7 @@ The number of copies in Linear 1D and Polar pattern - The number of copies in Linear 1D and Polar pattern + Kopia kopurua eredu 1D linealean eta polarrean @@ -668,6 +613,11 @@ A material for this object Objektu honentzako material bat + + + Controls how tool moves around corners. Default=Round + Tresnak izkinen inguruan nola mugitzen diren kontrolatzen du. Lehenetsia=Biribila + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada - - The library to use to generate the path - Bidea sortzeko erabiliko den liburutegia + + The direction along which dropcutter lines are created + Erortze-ebakigailuaren lerroak zein norabidetan sortuko diren - - Controls how tool moves around corners. Default=Round - Tresnak izkinen inguruan nola mugitzen diren kontrolatzen du. Lehenetsia=Biribila + + Should the operation be limited by the stock object or by the bounding box of the base object + Eragiketa objektu gordinak ala oinarri-objektuaren muga-kutxak mugatuko duen + + + + Step over percentage of the drop cutter path + Erortze-ebakigailuaren bidearen ehunekoaren gaineko urratsa + + + + Z-axis offset from the surface of the object + Z ardatzeko desplazamendua objektuaren gainazaletik + + + + The Sample Interval. Small values cause long wait times + Laginketa-tartea. Balio txikiek itxarote-denbora luzeak eragiten dituzte + + + + Enable optimization which removes unnecessary points from G-Code output + Gaitu optimizazioa, beharrezkoak ez diren puntuak G-Code irteeratik kentzeko + + + + The completion mode for the operation: single or multi-pass + Eragiketa osatzeko modua: pasaldi bakarrean edo anitzetan + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka + + + + Ignore areas that proceed below specified depth. + Ezikusi adierazitako sakoneraren azpitik dauden areak. + + + + Depth used to identify waste areas to ignore. + Ezikusiko diren hondar-areak identifikatzeko erabiliko den sakonera. + + + + Cut through waste to depth at model edge, releasing the model. + Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. + + + + The base geometry of this toolpath + Tresna-bide honen oinarri-geometria @@ -986,16 +986,16 @@ Selected tool is not a drill Hautatutako tresna ez da zulagailua - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Mozte-ertzaren angelu baliogabea %.2f, izan behar du <90° eta >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. %s.%s elementua ezin da prozesatu zulo zirkular gisa - kendu oinarri-geometrien zerrendatik. + + + Face appears misaligned after initial rotation. + Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. + + + + Multiple faces in Base Geometry. + Aurpegi anitz oinarri-geometrian. + + + + Depth settings will be applied to all faces. + Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. + + + + EnableRotation property is 'Off'. + Biraketa gaitzeko propietatea desaktibatuta dago. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Pieza gordinaren goialdera handitua. Selected feature(s) require 'Enable Rotation: B(y)' for access. Hautatutako elementua(e) k 'Gaitu biraketa: B(y)' behar du(te) atzipenerako. - - - Face appears misaligned after initial rotation. - Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. - - - - Multiple faces in Base Geometry. - Aurpegi anitz oinarri-geometrian. - - - - Depth settings will be applied to all faces. - Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. - - - - EnableRotation property is 'Off'. - Biraketa gaitzeko propietatea desaktibatuta dago. - Ignoring non-horizontal Face @@ -1603,7 +1603,7 @@ Pieza gordinaren goialdera handitua. Zero working area to process. Check your selection and settings. - Zero working area to process. Check your selection and settings. + Ez dago laneko arearik prozesatzeko. Begiratu zure hautapena eta ezarpenak. @@ -1990,6 +1990,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathPocket + + + Pocket Shape + Poltsa-forma + + + + Creates a Path Pocket object from a face or faces + Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik + Normal @@ -2040,16 +2050,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Final depth set below ZMin of face(s) selected. Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita. - - - Pocket Shape - Poltsa-forma - - - - Creates a Path Pocket object from a face or faces - Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - 3D Pocket @@ -2113,7 +2113,7 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Start Depth is lower than face depth. Setting to: - Start Depth is lower than face depth. Setting to: + Hasierako sakonera aurpegiaren sakonera baino baxuagoa da. Honakoa ezartzen: @@ -2183,16 +2183,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Face Profile Aurpegi-profila - - - For open edges, verify Final Depth for this operation. - Ertz irekietan, egiaztatu eragiketa honen azken sakonera. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + Ertz irekietan, egiaztatu eragiketa honen azken sakonera. + Profile based on face or faces @@ -3471,16 +3471,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Dressup - - - Dress-up - Jantzi - - - - Creates a Path Dess-up object from a selected path - Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz - Please select one path object @@ -3500,6 +3490,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Please select a Path object Hautatu bide-objektu bat + + + Dress-up + Jantzi + + + + Creates a Path Dess-up object from a selected path + Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz + Path_DressupAxisMap @@ -3972,6 +3972,13 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Hop object Bide-jauziko objektu bat sortzen du + + + The selected object is not a path + + Hautatutako objektua ez da bide bat + + Please select one path object @@ -3987,13 +3994,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Hop Sortu jauzia - - - The selected object is not a path - - Hautatutako objektua ez da bide bat - - Path_Inspect @@ -4243,11 +4243,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Sanity - - - The Job has no selected Base object. - Lanak ez du hautatutako oinarri-objekturik. - Check the path job for common errors @@ -4498,6 +4493,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Date Data + + + The Job has no selected Base object. + Lanak ez du hautatutako oinarri-objekturik. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4659,6 +4659,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_ToolController + + + Tool Number to Load + Kargatuko den tresnaren zenbakia + Add Tool Controller to the Job @@ -4669,11 +4674,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Add Tool Controller Gehitu tresna-kontrolatzailea - - - Tool Number to Load - Kargatuko den tresnaren zenbakia - Path_ToolTable @@ -4700,6 +4700,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a medial line engraving path Erdiko lerroko grabatze-bide bat sortzen du + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4710,11 +4715,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Engraver Cutting Edge Angle must be < 180 degrees. Grabagailuaren mozte-ertzaren angeluak < 180 gradu izan behar du. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du - Path_Waterline @@ -4749,11 +4749,56 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Save toolbit library Gorde tresna-atalaren liburutegia + + + Tooltable JSON (*.json) + JSON tresna-mahaia (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tresna-mahaia (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tresna-mahaia (*.tbl) + Open tooltable Ireki tresna-mahaia + + + Save tooltable + Gorde tresna-mahaia + + + + Rename Tooltable + Aldatu tresna-mahaiaren izena + + + + Enter Name: + Sartu izena: + + + + Add New Tool Table + Gehitu tresna-mahai berria + + + + Delete Selected Tool Table + Ezabatu hautatutako tresna-mahaia + + + + Rename Selected Tool Table + Aldatu izena hautatutako taula-mahaiari + Tooltable editor @@ -4964,11 +5009,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) XML tresna-mahaia (*.xml);;HeeksCAD tresna-mahaia (*.tooltable) - - - Save tooltable - Gorde tresna-mahaia - Tooltable XML (*.xml) @@ -4984,46 +5024,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Object doesn't have a tooltable property Objektuak ez du tresna-mahai propietate bat - - - Rename Tooltable - Aldatu tresna-mahaiaren izena - - - - Enter Name: - Sartu izena: - - - - Add New Tool Table - Gehitu tresna-mahai berria - - - - Delete Selected Tool Table - Ezabatu hautatutako tresna-mahaia - - - - Rename Selected Tool Table - Aldatu izena hautatutako taula-mahaiari - - - - Tooltable JSON (*.json) - JSON tresna-mahaia (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tresna-mahaia (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tresna-mahaia (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index c9faec4615..10859bc1f6 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Näytä väliaikaisen polun rakennuskohteet kun moduuli on DEBUG-tilassa. - - - The direction along which dropcutter lines are created - Suunta, jota pitkin pudotusleikkurin linjat luodaan - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Pitääkö toimintoa rajoittaa varaston kohteen mukaan vai peruskohteen rajaavan kehyksen mukaan - - - - Step over percentage of the drop cutter path - Pudotusleikkurin polun askeleen prosenttiosuus - - - - Z-axis offset from the surface of the object - Z akselin siirtymä kohteen pinnasta - - - - The Sample Interval. Small values cause long wait times - Näytteenoton väli. Pienet arvot aiheuttavat pitkiä odotusaikoja - - - - Enable optimization which removes unnecessary points from G-Code output - Ota käyttöön optimointi, joka poistaa tarpeettomat pisteet G-Code -ulostulosta - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Pienemmillä arvoilla saadaan hienompi ja tarkempi verkkopinta. Pienemmät eivät lisää prosessointiaikaa paljon. - - - The completion mode for the operation: single or multi-pass - Toiminnon valmistumistila: kertaalleen tai moninkertaisesti - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Suunta, mitä työkalupolun pitäisi kulkea osan ympärillä: kiipeillen (Myötäpäivään) tai tavanomaisen tapaan (Vastapäivään) - Stop index(angle) for rotational scan Pysäytä indeksi(kulma) rotaatiokuvausta varten - - - Ignore areas that proceed below specified depth. - Älä huomioi määritetyn syvyyden alapuolella kulkevia alueita. - - - - Depth used to identify waste areas to ignore. - Syvyys, jolla tunnistetaan jätealueet, joita ei huomioida. - - - - Cut through waste to depth at model edge, releasing the model. - Leikkaa jätteen läpi syvyyteen mallireunassa, jolloin malli vapautuu. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Tämän objektin materiaali + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The direction along which dropcutter lines are created + Suunta, jota pitkin pudotusleikkurin linjat luodaan - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Pitääkö toimintoa rajoittaa varaston kohteen mukaan vai peruskohteen rajaavan kehyksen mukaan + + + + Step over percentage of the drop cutter path + Pudotusleikkurin polun askeleen prosenttiosuus + + + + Z-axis offset from the surface of the object + Z akselin siirtymä kohteen pinnasta + + + + The Sample Interval. Small values cause long wait times + Näytteenoton väli. Pienet arvot aiheuttavat pitkiä odotusaikoja + + + + Enable optimization which removes unnecessary points from G-Code output + Ota käyttöön optimointi, joka poistaa tarpeettomat pisteet G-Code -ulostulosta + + + + The completion mode for the operation: single or multi-pass + Toiminnon valmistumistila: kertaalleen tai moninkertaisesti + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Suunta, mitä työkalupolun pitäisi kulkea osan ympärillä: kiipeillen (Myötäpäivään) tai tavanomaisen tapaan (Vastapäivään) + + + + Ignore areas that proceed below specified depth. + Älä huomioi määritetyn syvyyden alapuolella kulkevia alueita. + + + + Depth used to identify waste areas to ignore. + Syvyys, jolla tunnistetaan jätealueet, joita ei huomioida. + + + + Cut through waste to depth at model edge, releasing the model. + Leikkaa jätteen läpi syvyyteen mallireunassa, jolloin malli vapautuu. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Ladattavan työkalun numero + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Ladattavan työkalun numero - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index 8434ab53a3..4419d073ea 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Ang landas upang kopyahin - - - The base geometry of this toolpath - Ang base Heometría ng toolpath na ito - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. + + + The library to use to generate the path + Ang library na gagamitin para makabuo ng path + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Materyales para sa bagay na ito + + + Controls how tool moves around corners. Default=Round + Kinokontrol kung paano gumalaw ang tool sa paligid ng mga corner. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Ang library na gagamitin para makabuo ng path + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Kinokontrol kung paano gumalaw ang tool sa paligid ng mga corner. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + Ang base Heometría ng toolpath na ito @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Hindi valid na Cutting Edge Angle %.2f, dapat ay <90° at >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s ay hindi maproseso bilang circular hole - mangyaring alisin mula sa listahan ng Base geometry. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hugis ng Bulsa + + + + Creates a Path Pocket object from a face or faces + Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hugis ng Bulsa - - - - Creates a Path Pocket object from a face or faces - Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Bihisan - - - - Creates a Path Dess-up object from a selected path - Lumilikha ng Path Dess-up object mula sa napiling path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Mangyaring pumili ng isang Path Object + + + Dress-up + Bihisan + + + + Creates a Path Dess-up object from a selected path + Lumilikha ng Path Dess-up object mula sa napiling path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Lumilikha ng Path Hop object + + + The selected object is not a path + + Ang napiling object ay hindi isang path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Lumikha ng Hop - - - The selected object is not a path - - Ang napiling object ay hindi isang path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numero ng tool na i-load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Magdagdag ng Controller ng Tool - - - Tool Number to Load - Numero ng tool na i-load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Buksan ang tooltable + + + Save tooltable + I-save ang tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - I-save ang tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Ang object ay walang tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm index ca298fce63..5724be2dcf 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index 955ebd1a8c..13e6e9002c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Afficher les objets de construction de chemin temporaire lorsque le module est en mode DEBUG. - - - The direction along which dropcutter lines are created - La direction le long de laquelle les lignes de coupe sont créées - - - - Should the operation be limited by the stock object or by the bounding box of the base object - L'opération doit-elle être limitée par le brut ou par la boîte englobante de l'objet de base - - - - Step over percentage of the drop cutter path - Dépasser le pourcentage de la trajectoire du cutte - - - - Z-axis offset from the surface of the object - Décalage de l'axe Z par rapport à la surface de l'objet - - - - The Sample Interval. Small values cause long wait times - L’intervalle d’échantillonnage. les valeurs faibles provoquent de l'attente - - - - Enable optimization which removes unnecessary points from G-Code output - Activer l'optimisation supprimant les points inutiles du G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. De plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs n’augmentent pas sensiblement le temps de traitement. - - - The completion mode for the operation: single or multi-pass - Mode d’achèvement de l’opération : simple ou multi-passes - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) - Stop index(angle) for rotational scan Index(angle) d’arrêt pour le balayage en rotation - - - Ignore areas that proceed below specified depth. - Ignorer les zones qui se trouvent sous la profondeur indiquée. - - - - Depth used to identify waste areas to ignore. - Profondeur utilisée pour identifier la zone de chute à ignorer. - - - - Cut through waste to depth at model edge, releasing the model. - Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Le chemin d'accès à copier - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. + + + The library to use to generate the path + La bibliothèque à utiliser pour générer la trajectoire + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un matériau pour cet objet + + + Controls how tool moves around corners. Default=Round + Contrôle la façon dont l’outil se déplace dans les coins. Par défaut = arrondi + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Marquer « true » si vous utilisez une compensation de rayon de coupe - - The library to use to generate the path - La bibliothèque à utiliser pour générer la trajectoire + + The direction along which dropcutter lines are created + La direction le long de laquelle les lignes de coupe sont créées - - Controls how tool moves around corners. Default=Round - Contrôle la façon dont l’outil se déplace dans les coins. Par défaut = arrondi + + Should the operation be limited by the stock object or by the bounding box of the base object + L'opération doit-elle être limitée par le brut ou par la boîte englobante de l'objet de base + + + + Step over percentage of the drop cutter path + Dépasser le pourcentage de la trajectoire du cutte + + + + Z-axis offset from the surface of the object + Décalage de l'axe Z par rapport à la surface de l'objet + + + + The Sample Interval. Small values cause long wait times + L’intervalle d’échantillonnage. les valeurs faibles provoquent de l'attente + + + + Enable optimization which removes unnecessary points from G-Code output + Activer l'optimisation supprimant les points inutiles du G-Code + + + + The completion mode for the operation: single or multi-pass + Mode d’achèvement de l’opération : simple ou multi-passes + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) + + + + Ignore areas that proceed below specified depth. + Ignorer les zones qui se trouvent sous la profondeur indiquée. + + + + Depth used to identify waste areas to ignore. + Profondeur utilisée pour identifier la zone de chute à ignorer. + + + + Cut through waste to depth at model edge, releasing the model. + Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. + + + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil @@ -986,16 +986,16 @@ Selected tool is not a drill L’outil sélectionné n’est pas une perceuse - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angle d'arête de coupe invalide %.2f, doit être entre <90° et >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. La fonction %s.%s ne peut pas être traitée comme un trou circulaire - Retirez la de la liste de géométrie de Base . + + + Face appears misaligned after initial rotation. + La face semble mal alignée après la rotation initiale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Envisagez de basculer la propriété 'InverseAngle' et de recalculer. + + + + Multiple faces in Base Geometry. + Faces multiples dans la géométrie de base. + + + + Depth settings will be applied to all faces. + Les paramètres de profondeur seront appliqués à toutes les faces. + + + + EnableRotation property is 'Off'. + La propriété EnableRotation est 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Augmenté au dessus du stock. Selected feature(s) require 'Enable Rotation: B(y)' for access. La(les) fonction(s) sélectionnée(s) nécessite(nt) 'Activer la rotation : B(y)' pour l'accès. - - - Face appears misaligned after initial rotation. - La face semble mal alignée après la rotation initiale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Envisagez de basculer la propriété 'InverseAngle' et de recalculer. - - - - Multiple faces in Base Geometry. - Faces multiples dans la géométrie de base. - - - - Depth settings will be applied to all faces. - Les paramètres de profondeur seront appliqués à toutes les faces. - - - - EnableRotation property is 'Off'. - La propriété EnableRotation est 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathPocket + + + Pocket Shape + Forme de poche + + + + Creates a Path Pocket object from a face or faces + Crée un objet poche à partir d'arêtes ou d'une surface + Normal @@ -2043,16 +2053,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Final depth set below ZMin of face(s) selected. Profondeur finale définie sous ZMin de face(s) sélectionnée(s). - - - Pocket Shape - Forme de poche - - - - Creates a Path Pocket object from a face or faces - Crée un objet poche à partir d'arêtes ou d'une surface - 3D Pocket @@ -2186,16 +2186,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Face Profile Contour de face - - - For open edges, verify Final Depth for this operation. - Pour les bords ouverts, vérifiez la Profondeur Finale pour cette opération. - Check edge selection and Final Depth requirements for profiling open edge(s). Vérifier la sélection des bords et les exigences de profondeur finale pour le profilage des arêtes ouvertes. + + + For open edges, verify Final Depth for this operation. + Pour les bords ouverts, vérifiez la Profondeur Finale pour cette opération. + Profile based on face or faces @@ -3473,16 +3473,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Dressup - - - Dress-up - Trajectoire additionnelle - - - - Creates a Path Dess-up object from a selected path - Crée un objet trajectoire additionnel à partir d'un parcours sélectionné - Please select one path object @@ -3502,6 +3492,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Please select a Path object Veuillez sélectionner un object parcours + + + Dress-up + Trajectoire additionnelle + + + + Creates a Path Dess-up object from a selected path + Crée un objet trajectoire additionnel à partir d'un parcours sélectionné + Path_DressupAxisMap @@ -3604,17 +3604,17 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Edit Dragknife Dress-up - Editer l'habillage du couteau + Editer l'habillage de la lame rotative DragKnife Dress-up - Trajectoire additionnelle couteau tangentiel + Lame rotative Modifies a path to add dragknife corner actions - Modifie un parcours pour ajouter les mouvements d'angle pour couteaux tangentiels + Modifie un parcours pour ajouter des dégagements des angles pour la lame rotative @@ -3974,6 +3974,13 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Hop object Crée un object saut + + + The selected object is not a path + + L'objet sélectionné n'est pas un parcours + + Please select one path object @@ -3989,13 +3996,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Hop Crée un saut - - - The selected object is not a path - - L'objet sélectionné n'est pas un parcours - - Path_Inspect @@ -4245,11 +4245,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Sanity - - - The Job has no selected Base object. - La tâche n'a pas d'objet de Base sélectionné. - Check the path job for common errors @@ -4500,6 +4495,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Date Date + + + The Job has no selected Base object. + La tâche n'a pas d'objet de Base sélectionné. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_ToolController + + + Tool Number to Load + Numéro d'outil à charger + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Add Tool Controller Ajouter un contrôleur d'outil - - - Tool Number to Load - Numéro d'outil à charger - Path_ToolTable @@ -4702,6 +4702,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a medial line engraving path Crée une ligne médiane de gravure + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve nécessite un outil de gravure avec angle de coupe + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Engraver Cutting Edge Angle must be < 180 degrees. L'angle de coupe du graveur doit être <180 degrés. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve nécessite un outil de gravure avec angle de coupe - Path_Waterline @@ -4751,11 +4751,56 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Save toolbit library Enregistrer la bibliothèque d'outils + + + Tooltable JSON (*.json) + Table d'outils JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Table d'outils HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Table d'outils LinuxCNC (*.tbl) + Open tooltable Ouvre la table des outils + + + Save tooltable + Enregistrer la table d'outils + + + + Rename Tooltable + Renommer la table d'outils + + + + Enter Name: + Saisir le nom : + + + + Add New Tool Table + Ajouter une nouvelle table d'outils + + + + Delete Selected Tool Table + Supprimer la table des outils sélectionnée + + + + Rename Selected Tool Table + Renommer la table des outils sélectionnée + Tooltable editor @@ -4966,11 +5011,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - - - Save tooltable - Enregistrer la table d'outils - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Object doesn't have a tooltable property L'objet ne possède pas de propriété d'outil pour être mis dans la table - - - Rename Tooltable - Renommer la table d'outils - - - - Enter Name: - Saisir le nom : - - - - Add New Tool Table - Ajouter une nouvelle table d'outils - - - - Delete Selected Tool Table - Supprimer la table des outils sélectionnée - - - - Rename Selected Tool Table - Renommer la table des outils sélectionnée - - - - Tooltable JSON (*.json) - Table d'outils JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Table d'outils HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Table d'outils LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -5241,12 +5241,12 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un DragKnife Dress-up - Trajectoire additionnelle couteau tangentiel + Lame rotative Modifies a path to add dragknife corner actions - Modifie un parcours pour ajouter les mouvements d'angle pour couteaux tangentiels + Modifie un parcours pour ajouter des dégagements des angles pour la lame rotative diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index de2630a030..b7c131aa7c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - A dirección ao longo da cal se crean as liñas de dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - No caso de que a operación estea limitada por obxecto stock ou por carcasa da base do obxecto - - - - Step over percentage of the drop cutter path - Paso sobre porcentaxe da traxectoria de drop cutter - - - - Z-axis offset from the surface of the object - Z-eixo de desprazamento dende a superficie do obxecto - - - - The Sample Interval. Small values cause long wait times - Intervalo de mostra. Valores pequenos causan longas esperas - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar a optimización que elimina puntos innecesarios de saída dende G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - O modo de completado para operación: sinxelo ou pase múltiple - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) - Stop index(angle) for rotational scan Parar índice(ángulo) para dixitalización rotacional - - - Ignore areas that proceed below specified depth. - Ignorar áreas que se desenrolan abaixo a profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de restos a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Tallar os restos na profundidade no bordo do modelo, liberando o modelo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied A traxectoria a ser copiada - - - The base geometry of this toolpath - A xeometría base desta traxectoria de ferramenta - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a operación. A dirección é dependente da operación. + + + The library to use to generate the path + A libraría a usar para xerar a traxectoria + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material para este obxecto + + + Controls how tool moves around corners. Default=Round + Controla como se move a ferramenta nas esquinas. Por defecto=Redondo + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Facer verdadeiro, se se usa a compensación de radio de ferramenta - - The library to use to generate the path - A libraría a usar para xerar a traxectoria + + The direction along which dropcutter lines are created + A dirección ao longo da cal se crean as liñas de dropcutter - - Controls how tool moves around corners. Default=Round - Controla como se move a ferramenta nas esquinas. Por defecto=Redondo + + Should the operation be limited by the stock object or by the bounding box of the base object + No caso de que a operación estea limitada por obxecto stock ou por carcasa da base do obxecto + + + + Step over percentage of the drop cutter path + Paso sobre porcentaxe da traxectoria de drop cutter + + + + Z-axis offset from the surface of the object + Z-eixo de desprazamento dende a superficie do obxecto + + + + The Sample Interval. Small values cause long wait times + Intervalo de mostra. Valores pequenos causan longas esperas + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar a optimización que elimina puntos innecesarios de saída dende G-Code + + + + The completion mode for the operation: single or multi-pass + O modo de completado para operación: sinxelo ou pase múltiple + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolan abaixo a profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de restos a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Tallar os restos na profundidade no bordo do modelo, liberando o modelo. + + + + The base geometry of this toolpath + A xeometría base desta traxectoria de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ángulo de corte non válido %.2f, debe ser <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. A Característica %s.%s non pode ser procesada como un burato circular - por favor elimíneo da lista de xeometría base. + + + Face appears misaligned after initial rotation. + A face aparece desaliñada despois da rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considera trocar ao ángulo inverso e volver computar. + + + + Multiple faces in Base Geometry. + Múltiples faces en Xeometría Base. + + + + Depth settings will be applied to all faces. + Os axustes de profundidade serán aplicados a tódalas faces. + + + + EnableRotation property is 'Off'. + A propiedade Activar Rotación está 'Desactivada'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - A face aparece desaliñada despois da rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considera trocar ao ángulo inverso e volver computar. - - - - Multiple faces in Base Geometry. - Múltiples faces en Xeometría Base. - - - - Depth settings will be applied to all faces. - Os axustes de profundidade serán aplicados a tódalas faces. - - - - EnableRotation property is 'Off'. - A propiedade Activar Rotación está 'Desactivada'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathPocket + + + Pocket Shape + Forma Baleira + + + + Creates a Path Pocket object from a face or faces + Crea un obxecto Traxectoria baleiro dende unha face ou faces + Normal @@ -2043,16 +2053,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Baleira - - - - Creates a Path Pocket object from a face or faces - Crea un obxecto Traxectoria baleiro dende unha face ou faces - 3D Pocket @@ -2186,16 +2186,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Face Profile Perfil de face - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Dressup - - - Dress-up - Aspecto - - - - Creates a Path Dess-up object from a selected path - Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada - Please select one path object @@ -3503,6 +3493,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Please select a Path object Por favor, escolme un obxecto traxectoria + + + Dress-up + Aspecto + + + + Creates a Path Dess-up object from a selected path + Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Hop object Crea un obxecto salto de traxectoria + + + The selected object is not a path + + O obxecto escollido non é unha traxectoria + + Please select one path object @@ -3990,13 +3997,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Hop Crear Salto - - - The selected object is not a path - - O obxecto escollido non é unha traxectoria - - Path_Inspect @@ -4246,11 +4246,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Sanity - - - The Job has no selected Base object. - O traballo non ten obxecto Base escolmado. - Check the path job for common errors @@ -4501,6 +4496,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Date Date + + + The Job has no selected Base object. + O traballo non ten obxecto Base escolmado. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_ToolController + + + Tool Number to Load + Número de ferramenta a cargar + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Add Tool Controller Engadir Controlador de Ferramenta - - - Tool Number to Load - Número de ferramenta a cargar - Path_ToolTable @@ -4703,6 +4703,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Táboa de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Táboa de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Táboa de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir táboa de ferramentas + + + Save tooltable + Gardar táboa de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Táboa de ferramentas XML (*.xml);;táboa de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Gardar táboa de ferramentas - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Object doesn't have a tooltable property O obxecto non ten unha propiedade de táboa de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Táboa de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Táboa de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Táboa de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index ef31ec9de2..8c8a065a53 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Prikažite privremene objekte za izgradnju staza kada je modul u stanju DEBUG moda. - - - The direction along which dropcutter lines are created - Smjer duž kojeg se stvaraju linije spuštajućeg glodala (drop-cutter) - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Kako operaciju treba ograničiti, kroz objekt osnove ili granični okvir osnovnog objekta - - - - Step over percentage of the drop cutter path - Preklapanje staza spuštajućeg glodala (drop-cutter) u postocima - - - - Z-axis offset from the surface of the object - Z-os pomak od površine objekta - - - - The Sample Interval. Small values cause long wait times - Interval uzorka. Male vrijednosti uzrokuju dugo čekanje - - - - Enable optimization which removes unnecessary points from G-Code output - Omogući optimizaciju koja uklanja nepotrebne točke iz izvoza G-Koda - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -49,36 +19,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti ne povećavaju vrijeme obrade. - - - The completion mode for the operation: single or multi-pass - Način dovršetka operacije: jednostruki ili višeprolazni - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Smjer kojim alatna staza treba obilaziti dio: uspon (ClockWise) ili konvencionalni (CounterClockWise) - Stop index(angle) for rotational scan Zaustavni indeks (kut) za rotacijsko skeniranje - - - Ignore areas that proceed below specified depth. - Zanemarite područja koja se odvijaju ispod određene dubine. - - - - Depth used to identify waste areas to ignore. - Dubina koja se koristi za prepoznavanje područja odpadaka koje treba zanemariti. - - - - Cut through waste to depth at model edge, releasing the model. - Prerežite otpadak do dubine na rubu modela, oslobađajući model. - Dropcutter lines are created parallel to this axis. @@ -271,11 +216,6 @@ The path to be copied Put koji treba kopirati - - - The base geometry of this toolpath - Osnovna geometrija ove obrade staze - The tool controller that will be used to calculate the path @@ -623,6 +563,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji. + + + The library to use to generate the path + Biblioteka koja se koristiti za generiranje staze + Start pocketing at center or boundary @@ -727,6 +672,11 @@ A material for this object Materijal za ovaj objekt + + + Controls how tool moves around corners. Default=Round + Kontrolira kako se alat kreće po uglovima. Zadano=krug + Maximum distance before a miter join is truncated @@ -758,14 +708,64 @@ Postavi na istinito, ako koristite kompenzaciju radijusa glodala - - The library to use to generate the path - Biblioteka koja se koristiti za generiranje staze + + The direction along which dropcutter lines are created + Smjer duž kojeg se stvaraju linije spuštajućeg glodala (drop-cutter) - - Controls how tool moves around corners. Default=Round - Kontrolira kako se alat kreće po uglovima. Zadano=krug + + Should the operation be limited by the stock object or by the bounding box of the base object + Kako operaciju treba ograničiti, kroz objekt osnove ili granični okvir osnovnog objekta + + + + Step over percentage of the drop cutter path + Preklapanje staza spuštajućeg glodala (drop-cutter) u postocima + + + + Z-axis offset from the surface of the object + Z-os pomak od površine objekta + + + + The Sample Interval. Small values cause long wait times + Interval uzorka. Male vrijednosti uzrokuju dugo čekanje + + + + Enable optimization which removes unnecessary points from G-Code output + Omogući optimizaciju koja uklanja nepotrebne točke iz izvoza G-Koda + + + + The completion mode for the operation: single or multi-pass + Način dovršetka operacije: jednostruki ili višeprolazni + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Smjer kojim alatna staza treba obilaziti dio: uspon (ClockWise) ili konvencionalni (CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Zanemarite područja koja se odvijaju ispod određene dubine. + + + + Depth used to identify waste areas to ignore. + Dubina koja se koristi za prepoznavanje područja odpadaka koje treba zanemariti. + + + + Cut through waste to depth at model edge, releasing the model. + Prerežite otpadak do dubine na rubu modela, oslobađajući model. + + + + The base geometry of this toolpath + Osnovna geometrija ove obrade staze @@ -1053,16 +1053,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Pogrešan rub rezanja kut %.2f, mora biti < 90 ° i > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1204,6 +1204,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Svojstvo %s.%s ne može se obraditi kao kružna rupa - uklonite je s popisa geometrija baze. + + + Face appears misaligned after initial rotation. + Lice se čini pogrešno poravnano nakon početne rotacije. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. + + + + Multiple faces in Base Geometry. + Višestruka lica u Osnovnoj Geometriji. + + + + Depth settings will be applied to all faces. + Postavke dubine primijenit će se na sva lica. + + + + EnableRotation property is 'Off'. + Svojstvo Omogući Rotaciju je 'isključeno'. + Unable to create path for face(s). @@ -1311,31 +1336,6 @@ Povećana na vrh osnove. - - - Face appears misaligned after initial rotation. - Lice se čini pogrešno poravnano nakon početne rotacije. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. - - - - Multiple faces in Base Geometry. - Višestruka lica u Osnovnoj Geometriji. - - - - Depth settings will be applied to all faces. - Postavke dubine primijenit će se na sva lica. - - - - EnableRotation property is 'Off'. - Svojstvo Omogući Rotaciju je 'isključeno'. - Ignoring non-horizontal Face @@ -2112,6 +2112,16 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathPocket + + + Pocket Shape + Oblik Utora + + + + Creates a Path Pocket object from a face or faces + Stvara objekt staze utora iz površine ili površina lica + Normal @@ -2166,16 +2176,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr - - - Pocket Shape - Oblik Utora - - - - Creates a Path Pocket object from a face or faces - Stvara objekt staze utora iz površine ili površina lica - 3D Pocket @@ -2321,6 +2321,11 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr Face Profile Profil naličjanaličja + + + Check edge selection and Final Depth requirements for profiling open edge(s). + Check edge selection and Final Depth requirements for profiling open edge(s). + For open edges, verify Final Depth for this operation. @@ -2328,11 +2333,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr - - - Check edge selection and Final Depth requirements for profiling open edge(s). - Check edge selection and Final Depth requirements for profiling open edge(s). - Profile based on face or faces @@ -3715,16 +3715,6 @@ zadana vrijednost = 10,0. Path_Dressup - - - Dress-up - Dress-up (Odjenuti) - - - - Creates a Path Dess-up object from a selected path - Stvara staza objekt Dress-up od odabrane staze - Please select one path object @@ -3744,6 +3734,16 @@ zadana vrijednost = 10,0. Please select a Path object Odaberite objekt staze + + + Dress-up + Dress-up (Odjenuti) + + + + Creates a Path Dess-up object from a selected path + Stvara staza objekt Dress-up od odabrane staze + Path_DressupAxisMap @@ -4222,6 +4222,13 @@ zadana vrijednost = 10,0. Creates a Path Hop object Stvori objekt prijelaza staze + + + The selected object is not a path + + Odabrani objekt nije putanja staze + + Please select one path object @@ -4237,13 +4244,6 @@ zadana vrijednost = 10,0. Create Hop Stvori prijelaz - - - The selected object is not a path - - Odabrani objekt nije putanja staze - - Path_Inspect @@ -4495,11 +4495,6 @@ zadana vrijednost = 10,0. Path_Sanity - - - The Job has no selected Base object. - Zadatak nema odabran osnovni objekt. - Check the path job for common errors @@ -4756,6 +4751,11 @@ Broj linija Date Datum + + + The Job has no selected Base object. + Zadatak nema odabran osnovni objekt. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4923,6 +4923,11 @@ Broj linija Path_ToolController + + + Tool Number to Load + Broj alata koji se koristi + Add Tool Controller to the Job @@ -4933,11 +4938,6 @@ Broj linija Add Tool Controller Dodajte kontroler alata - - - Tool Number to Load - Broj alata koji se koristi - Path_ToolTable @@ -4964,6 +4964,14 @@ Broj linija Creates a medial line engraving path Stvara put gravure po medijalnoj crti + + + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve zahtijeva gravura rezač s +Kutom rezanja ruba + @@ -4976,14 +4984,6 @@ Broj linija Engraver Cutting Edge Angle must be < 180 degrees. Rezni kut ruba graviranja mora biti < 180 stupnjeva. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve zahtijeva gravura rezač s -Kutom rezanja ruba - - - Path_Waterline @@ -5020,11 +5020,56 @@ Kutom rezanja ruba Save toolbit library Spremi biblioteku nastavaka alata + + + Tooltable JSON (*.json) + Tabela alata JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Tabela alata (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Tabela alata (*.tbl) + Open tooltable Otvori tabelu alata + + + Save tooltable + Spremi tabelu alata + + + + Rename Tooltable + Preimenuj Tabelu Alata + + + + Enter Name: + Unesite ime: + + + + Add New Tool Table + Dodajte novu tablicu alata + + + + Delete Selected Tool Table + Izbriši odabranu tablicu alata + + + + Rename Selected Tool Table + Preimenuj odabranu tablicu alata + Tooltable editor @@ -5235,11 +5280,6 @@ Kutom rezanja ruba Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela alata XML (*.xml);;HeeksCAD tabela alata(*.tooltable) - - - Save tooltable - Spremi tabelu alata - Tooltable XML (*.xml) @@ -5255,46 +5295,6 @@ Kutom rezanja ruba Object doesn't have a tooltable property Objekt nema svojstvo alata stola - - - Rename Tooltable - Preimenuj Tabelu Alata - - - - Enter Name: - Unesite ime: - - - - Add New Tool Table - Dodajte novu tablicu alata - - - - Delete Selected Tool Table - Izbriši odabranu tablicu alata - - - - Rename Selected Tool Table - Preimenuj odabranu tablicu alata - - - - Tooltable JSON (*.json) - Tabela alata JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Tabela alata (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Tabela alata (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 67736943e9..42e51430ca 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Az ideiglenes építőobjektumok megjelenítésének útvonala, ha a modul DEBUG módban van. - - - The direction along which dropcutter lines are created - Az stancoló egyenesei mentén az irányok létrehozva - - - - Should the operation be limited by the stock object or by the bounding box of the base object - A műveletet korlátozza az alaptest állomány objektum vagy az alap objektum határolókerete - - - - Step over percentage of the drop cutter path - Átléptetési százalék a stancoló útvonalán - - - - Z-axis offset from the surface of the object - Z-tengely eltolása a tárgy felületétől - - - - The Sample Interval. Small values cause long wait times - A Mintavételezési időköz. Kisebb értékek hosszú várakozást okoznak - - - - Enable optimization which removes unnecessary points from G-Code output - Engedélyezi az optimalizálást, amely eltávolítja a szükségtelen pontokat a G-kód kimenetéről - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. A kisebb értékek finomabb, pontosabb hálót eredményeznek. A kisebb értékek nem növelik jelentősen a feldolgozási időt. - - - The completion mode for the operation: single or multi-pass - A művelet befejezési módja: egy vagy több-áthaladású - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) - Stop index(angle) for rotational scan A körforgó letapogatás végpont indexe (szöge) - - - Ignore areas that proceed below specified depth. - Hagyja figyelmen kívül azokat a területeket, amelyek a megadott mélység alatt haladnak. - - - - Depth used to identify waste areas to ignore. - Hulladékterületek figyelmen kívül hagyáshoz használt mélység. - - - - Cut through waste to depth at model edge, releasing the model. - Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied A másolni kívánt szerszámpálya útvonal - - - The base geometry of this toolpath - Ennek a szerszámmozgásnak az alapgeometriája - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra eltolása a művelethez. Iránya a függ a művelettől. + + + The library to use to generate the path + Az elérési út létrehozásához használt könyvtár + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Egy anyag ehhez a tárgyhoz + + + Controls how tool moves around corners. Default=Round + Szabályozza az eszköz mozgását a sarkoknál. Alapértelmezett=Kerekített + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Állítsa igazra, ha sugár vágó kompenzációt alkalmaz - - The library to use to generate the path - Az elérési út létrehozásához használt könyvtár + + The direction along which dropcutter lines are created + Az stancoló egyenesei mentén az irányok létrehozva - - Controls how tool moves around corners. Default=Round - Szabályozza az eszköz mozgását a sarkoknál. Alapértelmezett=Kerekített + + Should the operation be limited by the stock object or by the bounding box of the base object + A műveletet korlátozza az alaptest állomány objektum vagy az alap objektum határolókerete + + + + Step over percentage of the drop cutter path + Átléptetési százalék a stancoló útvonalán + + + + Z-axis offset from the surface of the object + Z-tengely eltolása a tárgy felületétől + + + + The Sample Interval. Small values cause long wait times + A Mintavételezési időköz. Kisebb értékek hosszú várakozást okoznak + + + + Enable optimization which removes unnecessary points from G-Code output + Engedélyezi az optimalizálást, amely eltávolítja a szükségtelen pontokat a G-kód kimenetéről + + + + The completion mode for the operation: single or multi-pass + A művelet befejezési módja: egy vagy több-áthaladású + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) + + + + Ignore areas that proceed below specified depth. + Hagyja figyelmen kívül azokat a területeket, amelyek a megadott mélység alatt haladnak. + + + + Depth used to identify waste areas to ignore. + Hulladékterületek figyelmen kívül hagyáshoz használt mélység. + + + + Cut through waste to depth at model edge, releasing the model. + Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. + + + + The base geometry of this toolpath + Ennek a szerszámmozgásnak az alapgeometriája @@ -986,16 +986,16 @@ Selected tool is not a drill A kijelölt eszköz nem fúró - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Érvénytelen forgácsoló él szög %.2f, <90° és >=0° közti kell + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. A %s.%s funkciót nem lehet feldolgozni kör alakú mélyedésként - távolítsa el az alap geometriai listából. + + + Face appears misaligned after initial rotation. + Az felületet a kezdeti forgatás után rosszul igazítja a program. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. + + + + Multiple faces in Base Geometry. + Többszörös felületek az alap geometriában. + + + + Depth settings will be applied to all faces. + A mélységbeállítás mindegyik felületre érvényes lesz. + + + + EnableRotation property is 'Off'. + Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Az alaptest tetejére emelve. Selected feature(s) require 'Enable Rotation: B(y)' for access. A kijelölt elem(ek) re 'B(y) elforgatás engedélyezésére' van szükség a kisegítő lehetőségekhez. - - - Face appears misaligned after initial rotation. - Az felületet a kezdeti forgatás után rosszul igazítja a program. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. - - - - Multiple faces in Base Geometry. - Többszörös felületek az alap geometriában. - - - - Depth settings will be applied to all faces. - A mélységbeállítás mindegyik felületre érvényes lesz. - - - - EnableRotation property is 'Off'. - Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathPocket + + + Pocket Shape + Zseb alakzat + + + + Creates a Path Pocket object from a face or faces + Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből + Normal @@ -2043,16 +2053,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Final depth set below ZMin of face(s) selected. A kiválasztott felület(ek) ZMin alatti végső mélysége. - - - Pocket Shape - Zseb alakzat - - - - Creates a Path Pocket object from a face or faces - Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből - 3D Pocket @@ -2186,16 +2186,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Face Profile Felület profil - - - For open edges, verify Final Depth for this operation. - A nyitott élekre ellenőrizze a művelet végső mélységét. - Check edge selection and Final Depth requirements for profiling open edge(s). Ellenőrizze az élkiválasztást és a nyitott él(ek) profilozására vonatkozó végmélységi követelményeket. + + + For open edges, verify Final Depth for this operation. + A nyitott élekre ellenőrizze a művelet végső mélységét. + Profile based on face or faces @@ -3476,16 +3476,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Dressup - - - Dress-up - Megváltoztatás - - - - Creates a Path Dess-up object from a selected path - Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból - Please select one path object @@ -3505,6 +3495,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Please select a Path object Kérem válasszon egy pályaútvonal objektumot + + + Dress-up + Megváltoztatás + + + + Creates a Path Dess-up object from a selected path + Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból + Path_DressupAxisMap @@ -3977,6 +3977,13 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Hop object Gyorsmenet beszúrása a visszahúzási síkra + + + The selected object is not a path + + A kijelölt objektum nem pálya útvonal + + Please select one path object @@ -3992,13 +3999,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Hop Visszahúzási útszakasz hozzáadása - - - The selected object is not a path - - A kijelölt objektum nem pálya útvonal - - Path_Inspect @@ -4248,11 +4248,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Sanity - - - The Job has no selected Base object. - A feladatnak nincs kijelölt alap objektuma. - Check the path job for common errors @@ -4503,6 +4498,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Date Dátum + + + The Job has no selected Base object. + A feladatnak nincs kijelölt alap objektuma. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4664,6 +4664,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_ToolController + + + Tool Number to Load + Betöltendő szerszám száma + Add Tool Controller to the Job @@ -4674,11 +4679,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Add Tool Controller Eszköz vezérlő hozzáadása - - - Tool Number to Load - Betöltendő szerszám száma - Path_ToolTable @@ -4705,6 +4705,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a medial line engraving path Középvonali gravírozási útvonal létrehozása + + + VCarve requires an engraving cutter with CuttingEdgeAngle + A V-kivágás gravírozást igényel vágás élvágási szöggel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4715,11 +4720,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Engraver Cutting Edge Angle must be < 180 degrees. A véső vágóélének szöge < 180 fok. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - A V-kivágás gravírozást igényel vágás élvágási szöggel - Path_Waterline @@ -4754,11 +4754,56 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Save toolbit library Szerszámkönyvtár mentése + + + Tooltable JSON (*.json) + Szerszámlista JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD szerszámlista (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC szerszámlista (*.tbl) + Open tooltable Szerszámlista megnyitása + + + Save tooltable + Szerszámlista mentése + + + + Rename Tooltable + Szerszámlista átnevezése + + + + Enter Name: + Nevezze el: + + + + Add New Tool Table + Új szerszámlista hozzáadása + + + + Delete Selected Tool Table + Kijelölt szerszámlista törlése + + + + Rename Selected Tool Table + A kijelölt szerszámlista átnevezése + Tooltable editor @@ -4969,11 +5014,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Szerszámlista XML (*.xml);; HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Szerszámlista mentése - Tooltable XML (*.xml) @@ -4989,46 +5029,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Object doesn't have a tooltable property Objektum nem rendelkezik szerszámlista tulajdonsággal - - - Rename Tooltable - Szerszámlista átnevezése - - - - Enter Name: - Nevezze el: - - - - Add New Tool Table - Új szerszámlista hozzáadása - - - - Delete Selected Tool Table - Kijelölt szerszámlista törlése - - - - Rename Selected Tool Table - A kijelölt szerszámlista átnevezése - - - - Tooltable JSON (*.json) - Szerszámlista JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD szerszámlista (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC szerszámlista (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 55c2f829ab..4b51699a30 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path yang akan disalin - - - The base geometry of this toolpath - Geometri dasar dari toolpath ini - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. + + + The library to use to generate the path + The perpustakaan untuk menggunakan untuk menghasilkan jalan + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Bahan untuk objek ini + + + Controls how tool moves around corners. Default=Round + Kontrol bagaimana alat bergerak di sekitar sudut. Default=Putaran + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The perpustakaan untuk menggunakan untuk menghasilkan jalan + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Kontrol bagaimana alat bergerak di sekitar sudut. Default=Putaran + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + Geometri dasar dari toolpath ini @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Sudut Cutting Edge tidak benar%.2f, harus <90° dan>=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Fitur % s . % s tidak dapat diproses sebagai lubang melingkar - tolong hapus dari daftar geometri dasar. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1990,6 +1990,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2040,16 +2050,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2183,16 +2183,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Profil Wajah - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3470,16 +3470,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Membuat Jalur Dess-up objek dari suatu dipilih jalan - Please select one path object @@ -3497,6 +3487,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Silahkan pilih objek Path + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Membuat Jalur Dess-up objek dari suatu dipilih jalan + Path_DressupAxisMap @@ -3969,6 +3969,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Membuat Jalur Hop objek + + + The selected object is not a path + + The dipilih objek bukan jalan + Please select one path object @@ -3984,12 +3990,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Buat Hop - - - The selected object is not a path - - The dipilih objek bukan jalan - Path_Inspect @@ -4240,11 +4240,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4495,6 +4490,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4654,6 +4654,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4664,11 +4669,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Tambahkan Alat Pengontrol - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4695,6 +4695,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4705,11 +4710,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4744,11 +4744,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tooltable LinuxCNC (*.tbl) + Open tooltable Buka tooltable + + + Save tooltable + Simpan tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4959,11 +5004,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (* .xml) ;, HeeksCAD tooltable (* .tooltable) - - - Save tooltable - Simpan tooltable - Tooltable XML (*.xml) @@ -4979,46 +5019,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objek tidak memiliki properti tooltable - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tooltable LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 54cbfb3703..ce585382d1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra gli oggetti di costruzione dei percorsi temporanei quando il modulo è in modalità DEBUG. - - - The direction along which dropcutter lines are created - La direzione lungo la quale vengono create le linee di taglio - - - - Should the operation be limited by the stock object or by the bounding box of the base object - L'operazione dovrebbe essere delimitata dall'oggetto grezzo o dal riquadro di delimitazione dell'oggetto di base - - - - Step over percentage of the drop cutter path - Sovrascrivere la percentuale del percorso del cutter - - - - Z-axis offset from the surface of the object - Scostamento sull'asse Z dalla superficie dell'oggetto - - - - The Sample Interval. Small values cause long wait times - L'intervallo di campionamento. Piccoli valori causano lunghi tempi di attesa - - - - Enable optimization which removes unnecessary points from G-Code output - Abilita l'ottimizzazione che rimuove i punti non necessari dall'output G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Valori più piccoli producono una maglia più fine e precisa. Valori più piccoli non aumentano di molto il tempo di elaborazione. - - - The completion mode for the operation: single or multi-pass - La modalità di completamento per l'operazione: singolo o multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario - Stop index(angle) for rotational scan Indice di arresto (angolo) per la scansione rotazionale - - - Ignore areas that proceed below specified depth. - Ignora le aree che sono al di sotto della profondità specificata. - - - - Depth used to identify waste areas to ignore. - Profondità utilizzata per identificare le aree di scarto da ignorare. - - - - Cut through waste to depth at model edge, releasing the model. - Taglia lo scarto alla profondità a bordo modello, liberando il modello. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Il percorso da copiare - - - The base geometry of this toolpath - La geometria di base del percorso di questo utensile - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. + + + The library to use to generate the path + La libreria da utilizzare per generare il percorso + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un materiale per questo oggetto + + + Controls how tool moves around corners. Default=Round + Controlla come si muove lo strumento attorno agli angoli (Standard = Rotondo) + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Rendere vero (True), se si utilizza la compensazione raggio utensile - - The library to use to generate the path - La libreria da utilizzare per generare il percorso + + The direction along which dropcutter lines are created + La direzione lungo la quale vengono create le linee di taglio - - Controls how tool moves around corners. Default=Round - Controlla come si muove lo strumento attorno agli angoli (Standard = Rotondo) + + Should the operation be limited by the stock object or by the bounding box of the base object + L'operazione dovrebbe essere delimitata dall'oggetto grezzo o dal riquadro di delimitazione dell'oggetto di base + + + + Step over percentage of the drop cutter path + Sovrascrivere la percentuale del percorso del cutter + + + + Z-axis offset from the surface of the object + Scostamento sull'asse Z dalla superficie dell'oggetto + + + + The Sample Interval. Small values cause long wait times + L'intervallo di campionamento. Piccoli valori causano lunghi tempi di attesa + + + + Enable optimization which removes unnecessary points from G-Code output + Abilita l'ottimizzazione che rimuove i punti non necessari dall'output G-Code + + + + The completion mode for the operation: single or multi-pass + La modalità di completamento per l'operazione: singolo o multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario + + + + Ignore areas that proceed below specified depth. + Ignora le aree che sono al di sotto della profondità specificata. + + + + Depth used to identify waste areas to ignore. + Profondità utilizzata per identificare le aree di scarto da ignorare. + + + + Cut through waste to depth at model edge, releasing the model. + Taglia lo scarto alla profondità a bordo modello, liberando il modello. + + + + The base geometry of this toolpath + La geometria di base del percorso di questo utensile @@ -986,16 +986,16 @@ Selected tool is not a drill L'utensile selezionato non è una punta di foratura - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angolo di taglio di %.2f invalido, deve essere compreso fra <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Il tratto %s.%s non può essere calcolato come un foro circolare - prego rimuoverlo dall'elenco della geometria di base. + + + Face appears misaligned after initial rotation. + La faccia appare disallineata dopo la rotazione iniziale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. + + + + Multiple faces in Base Geometry. + Più facce nella Geometria di base. + + + + Depth settings will be applied to all faces. + Le impostazioni di Profondità saranno applicate a tutte le facce. + + + + EnableRotation property is 'Off'. + La proprietà EnableRotation è 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Aumentata fino all'altezza del pezzo grezzo. Selected feature(s) require 'Enable Rotation: B(y)' for access. Le funzioni selezionate richiedono 'Abilita rotazione: B(y)' per l'accesso. - - - Face appears misaligned after initial rotation. - La faccia appare disallineata dopo la rotazione iniziale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. - - - - Multiple faces in Base Geometry. - Più facce nella Geometria di base. - - - - Depth settings will be applied to all faces. - Le impostazioni di Profondità saranno applicate a tutte le facce. - - - - EnableRotation property is 'Off'. - La proprietà EnableRotation è 'Off'. - Ignoring non-horizontal Face @@ -1992,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tasca + + + + Creates a Path Pocket object from a face or faces + Crea un oggetto percorso Tasca da una o più facce + Normal @@ -2042,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profondità finale impostata sotto ZMin delle facce selezionate. - - - Pocket Shape - Tasca - - - - Creates a Path Pocket object from a face or faces - Crea un oggetto percorso Tasca da una o più facce - 3D Pocket @@ -2185,16 +2185,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Profilo da faccia - - - For open edges, verify Final Depth for this operation. - Per i bordi aperti, controllare la profondità finale per questa operazione. - Check edge selection and Final Depth requirements for profiling open edge(s). Controlla la selezione dei bordi e i requisiti di profondità finale per i profili dei bordi aperti. + + + For open edges, verify Final Depth for this operation. + Per i bordi aperti, controllare la profondità finale per questa operazione. + Profile based on face or faces @@ -3473,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Replica - - - - Creates a Path Dess-up object from a selected path - Crea un oggetto Replica modificabile del percorso selezionato - Please select one path object @@ -3502,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Si prega di selezionare un oggetto Percorso + + + Dress-up + Replica + + + + Creates a Path Dess-up object from a selected path + Crea un oggetto Replica modificabile del percorso selezionato + Path_DressupAxisMap @@ -3974,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un oggetto percorso Salto + + + The selected object is not a path + + L'oggetto selezionato non è un percorso + + Please select one path object @@ -3989,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crea Salto - - - The selected object is not a path - - L'oggetto selezionato non è un percorso - - Path_Inspect @@ -4245,11 +4245,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - La lavorazione non ha un oggetto base selezionato. - Check the path job for common errors @@ -4500,6 +4495,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data + + + The Job has no selected Base object. + La lavorazione non ha un oggetto base selezionato. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Carica utensile + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Aggiungi un Controllo utensile - - - Tool Number to Load - Carica utensile - Path_ToolTable @@ -4702,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea un tracciato di incisione a linea mediale + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve richiede un cutter per incisione con Taglio Laterale Angolare + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. L'angolo di taglio del cutter per incisione deve essere < 180 gradi. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve richiede un cutter per incisione con Taglio Laterale Angolare - Path_Waterline @@ -4751,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Salva la libreria utensili + + + Tooltable JSON (*.json) + Tabella degli utensili JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabella degli utensili HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabella degli utensili LinuxCNC (*.tbl) + Open tooltable Apri la tabella utensili + + + Save tooltable + Salva la tabella utensili + + + + Rename Tooltable + Rinomina la tabella utensili + + + + Enter Name: + Inserire il nome: + + + + Add New Tool Table + Aggiungi nuova tabella utensili + + + + Delete Selected Tool Table + Elimina la tabella degli utensili selezionata + + + + Rename Selected Tool Table + Rinomina la tabella degli utensili selezionati + Tooltable editor @@ -4966,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabella utensili XML (XML); Tabella utensili HeeksCAD (*.tooltable) - - - Save tooltable - Salva la tabella utensili - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property L'oggetto non ha le proprietà necessarie per la tabella utensili - - - Rename Tooltable - Rinomina la tabella utensili - - - - Enter Name: - Inserire il nome: - - - - Add New Tool Table - Aggiungi nuova tabella utensili - - - - Delete Selected Tool Table - Elimina la tabella degli utensili selezionata - - - - Rename Selected Tool Table - Rinomina la tabella degli utensili selezionati - - - - Tooltable JSON (*.json) - Tabella degli utensili JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabella degli utensili HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabella degli utensili LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 136e65a936..06ca657970 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. モジュールがDEBUGモード時に、一時パス、構築オブジェクトを表示します。 - - - The direction along which dropcutter lines are created - ドロップカッター線を作成する方向 - - - - Should the operation be limited by the stock object or by the bounding box of the base object - この工程はストックオブジェクト、またはベースオブジェクトのバウンディングボックスによって制限を受けます - - - - Step over percentage of the drop cutter path - ドロップカッターパスのステップオーバーのパーセント - - - - Z-axis offset from the surface of the object - オブジェクトのサーフェスからのZ軸オフセット - - - - The Sample Interval. Small values cause long wait times - サンプル間隔。 値を小さくすると処理時間が長くなります。 - - - - Enable optimization which removes unnecessary points from G-Code output - 最適化を有効に設定すると、G-Code出力から不必要な点を削除します - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. 値を小さくすると、より細かく、より正確なメッシュとなります。小さい値にしても、処理時間はそれほど大幅に増加しません。 - - - The completion mode for the operation: single or multi-pass - 工程の終了モード: シングルまたはマルチパス - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - ツールパスが部品の周りを移動する時の方向: Climb（時計回り）または Conventional（反時計回り） - Stop index(angle) for rotational scan 回転スキャンの停止インデックス（角度） - - - Ignore areas that proceed below specified depth. - 指定された深さより下のエリアを無視。 - - - - Depth used to identify waste areas to ignore. - 無視される不要エリアを特定するための深さ - - - - Cut through waste to depth at model edge, releasing the model. - モデル端で最低部まで不要部を切り抜き、モデルを解放 - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied コピーするパス - - - The base geometry of this toolpath - このツールパスのベースジオメトリー - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. 工程に適用する追加オフセット。方向は工程に依存して変わります。 + + + The library to use to generate the path + パスの生成に使用するライブラリ + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object このオブジェクトのマテリアル + + + Controls how tool moves around corners. Default=Round + 角部での工具の動き方を制御。既定＝ラウンド + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ 工具径補正を使用する場合は True - - The library to use to generate the path - パスの生成に使用するライブラリ + + The direction along which dropcutter lines are created + ドロップカッター線を作成する方向 - - Controls how tool moves around corners. Default=Round - 角部での工具の動き方を制御。既定＝ラウンド + + Should the operation be limited by the stock object or by the bounding box of the base object + この工程はストックオブジェクト、またはベースオブジェクトのバウンディングボックスによって制限を受けます + + + + Step over percentage of the drop cutter path + ドロップカッターパスのステップオーバーのパーセント + + + + Z-axis offset from the surface of the object + オブジェクトのサーフェスからのZ軸オフセット + + + + The Sample Interval. Small values cause long wait times + サンプル間隔。 値を小さくすると処理時間が長くなります。 + + + + Enable optimization which removes unnecessary points from G-Code output + 最適化を有効に設定すると、G-Code出力から不必要な点を削除します + + + + The completion mode for the operation: single or multi-pass + 工程の終了モード: シングルまたはマルチパス + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + ツールパスが部品の周りを移動する時の方向: Climb（時計回り）または Conventional（反時計回り） + + + + Ignore areas that proceed below specified depth. + 指定された深さより下のエリアを無視。 + + + + Depth used to identify waste areas to ignore. + 無視される不要エリアを特定するための深さ + + + + Cut through waste to depth at model edge, releasing the model. + モデル端で最低部まで不要部を切り抜き、モデルを解放 + + + + The base geometry of this toolpath + このツールパスのベースジオメトリー @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° %.2fは 無効な切れ刃角です。切れ刃角は <90° and >=0° でなければなりません + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. フィーチャー %s.%s は丸穴として処理できません。基本ジオメトリの一覧から削除してください + + + Face appears misaligned after initial rotation. + 初期回転後、面が不整状態になります。 + + + + Consider toggling the 'InverseAngle' property and recomputing. + 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 + + + + Multiple faces in Base Geometry. + ベースジオメトリーの複数面 + + + + Depth settings will be applied to all faces. + 深さの設定を全ての面に適用します + + + + EnableRotation property is 'Off'. + EnableRotation プロパティーが「オフ」になっています。 + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - 初期回転後、面が不整状態になります。 - - - - Consider toggling the 'InverseAngle' property and recomputing. - 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 - - - - Multiple faces in Base Geometry. - ベースジオメトリーの複数面 - - - - Depth settings will be applied to all faces. - 深さの設定を全ての面に適用します - - - - EnableRotation property is 'Off'. - EnableRotation プロパティーが「オフ」になっています。 - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathPocket + + + Pocket Shape + ポケット形状 + + + + Creates a Path Pocket object from a face or faces + 1面または複数面からパス・ポケット・オブジェクトを作成 + Normal @@ -2043,16 +2053,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - ポケット形状 - - - - Creates a Path Pocket object from a face or faces - 1面または複数面からパス・ポケット・オブジェクトを作成 - 3D Pocket @@ -2186,16 +2186,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Face Profile フェイス・プロファイル - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Dressup - - - Dress-up - ドレスアップ - - - - Creates a Path Dess-up object from a selected path - 選択したパスからパス・ドレスアップ・オブジェクトを作成 - Please select one path object @@ -3503,6 +3493,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Please select a Path object パスオブジェクトを選択して下さい + + + Dress-up + ドレスアップ + + + + Creates a Path Dess-up object from a selected path + 選択したパスからパス・ドレスアップ・オブジェクトを作成 + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a Path Hop object パス・ホップ・オブジェクトを作成 + + + The selected object is not a path + + 選択されたオブジェクトはパスではありません + + Please select one path object @@ -3990,13 +3997,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Create Hop ホップを作成 - - - The selected object is not a path - - 選択されたオブジェクトはパスではありません - - Path_Inspect @@ -4246,11 +4246,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Sanity - - - The Job has no selected Base object. - ジョブに選択されたベース オブジェクトがありません。 - Check the path job for common errors @@ -4501,6 +4496,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Date 日時 + + + The Job has no selected Base object. + ジョブに選択されたベース オブジェクトがありません。 + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_ToolController + + + Tool Number to Load + 読み込む工具番号 + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Add Tool Controller ツールコントローラーを追加 - - - Tool Number to Load - 読み込む工具番号 - Path_ToolTable @@ -4703,6 +4703,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Engraver Cutting Edge Angle must be < 180 degrees. 彫刻加工の切削エッジ角度は180度未満でなければなりません。 - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です - Path_Waterline @@ -4752,11 +4752,56 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Save toolbit library ツールビットのライブラリを保存 + + + Tooltable JSON (*.json) + ツールテーブル JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCADツールテーブル (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNCツールテーブル (*.tbl) + Open tooltable ツールテーブルを開く + + + Save tooltable + ツールテーブルを保存 + + + + Rename Tooltable + ツールテーブルの名前を変更 + + + + Enter Name: + 名前を入力: + + + + Add New Tool Table + 新しいツールテーブルを追加 + + + + Delete Selected Tool Table + 選択したツールテーブルを削除 + + + + Rename Selected Tool Table + 選択したツールテーブルの名前を変更 + Tooltable editor @@ -4967,11 +5012,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) ツールテーブルXML (*.xml);HeeksCADツールテーブル (*.tooltable) - - - Save tooltable - ツールテーブルを保存 - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Object doesn't have a tooltable property オブジェクトがツールテーブルプロパティを持っていません。 - - - Rename Tooltable - ツールテーブルの名前を変更 - - - - Enter Name: - 名前を入力: - - - - Add New Tool Table - 新しいツールテーブルを追加 - - - - Delete Selected Tool Table - 選択したツールテーブルを削除 - - - - Rename Selected Tool Table - 選択したツールテーブルの名前を変更 - - - - Tooltable JSON (*.json) - ツールテーブル JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCADツールテーブル (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNCツールテーブル (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index 10fc4dbfa0..82f7890c29 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - The Sample Interval. Small values cause long wait times - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Medžiaga šiam objektui + + + Controls how tool moves around corners. Default=Round + Controls how tool moves around corners. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Controls how tool moves around corners. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + The Sample Interval. Small values cause long wait times + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + Sukimo įgalinimo savybė yra išjungta. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - Sukimo įgalinimo savybė yra išjungta. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index 9461063524..f44500efad 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Toon de tijdelijke padconstructie-objecten wanneer de module in DEBUG-modus staat. - - - The direction along which dropcutter lines are created - De richting langs welke dropcutter lijnen worden gemaakt - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Moet de bewerking worden beperkt door het voorraadobject of door de begrenzingsdoos van het basisobject - - - - Step over percentage of the drop cutter path - Stap over percentage van het drop cutter pad - - - - Z-axis offset from the surface of the object - Z-as verschuiving van het oppervlak van het object - - - - The Sample Interval. Small values cause long wait times - De Staalinterval. Kleine waarden veroorzaken lange wachttijden - - - - Enable optimization which removes unnecessary points from G-Code output - Optimalisatie inschakelen die onnodige punten verwijdert van de G-Code uitvoer - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd niet aanzienlijk. - - - The completion mode for the operation: single or multi-pass - De voltooiing modus voor de bewerking: één of meerdere-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - De richting die het tool moet volge rond het werkstuk: Climb(met de klok mee) of conventioneel(tegen de klok) - Stop index(angle) for rotational scan Stop index(hoek) voor rotationele scan - - - Ignore areas that proceed below specified depth. - Negeer gebieden die onder de opgegeven diepte gaan. - - - - Depth used to identify waste areas to ignore. - Diepte die gebruikt werd om de te negeren afvalgebieden te identificeren. - - - - Cut through waste to depth at model edge, releasing the model. - Ga door afval naar diepte aan de modelrand, waardoor het model vrijkomt. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Het te kopiëren pad - - - The base geometry of this toolpath - De basisgeometrie voor dit gereedschapspad - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking. + + + The library to use to generate the path + De te bibliotheek gebruiken voor het genereren van het pad + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Een materiaal voor dit object + + + Controls how tool moves around corners. Default=Round + Bepaalt hoe het gereedschap zich door de hoeken beweegt. Standaard=Rond + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Zet Waar indien u gebruik maakt van de straalcompensatie van de snijder - - The library to use to generate the path - De te bibliotheek gebruiken voor het genereren van het pad + + The direction along which dropcutter lines are created + De richting langs welke dropcutter lijnen worden gemaakt - - Controls how tool moves around corners. Default=Round - Bepaalt hoe het gereedschap zich door de hoeken beweegt. Standaard=Rond + + Should the operation be limited by the stock object or by the bounding box of the base object + Moet de bewerking worden beperkt door het voorraadobject of door de begrenzingsdoos van het basisobject + + + + Step over percentage of the drop cutter path + Stap over percentage van het drop cutter pad + + + + Z-axis offset from the surface of the object + Z-as verschuiving van het oppervlak van het object + + + + The Sample Interval. Small values cause long wait times + De Staalinterval. Kleine waarden veroorzaken lange wachttijden + + + + Enable optimization which removes unnecessary points from G-Code output + Optimalisatie inschakelen die onnodige punten verwijdert van de G-Code uitvoer + + + + The completion mode for the operation: single or multi-pass + De voltooiing modus voor de bewerking: één of meerdere-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + De richting die het tool moet volge rond het werkstuk: Climb(met de klok mee) of conventioneel(tegen de klok) + + + + Ignore areas that proceed below specified depth. + Negeer gebieden die onder de opgegeven diepte gaan. + + + + Depth used to identify waste areas to ignore. + Diepte die gebruikt werd om de te negeren afvalgebieden te identificeren. + + + + Cut through waste to depth at model edge, releasing the model. + Ga door afval naar diepte aan de modelrand, waardoor het model vrijkomt. + + + + The base geometry of this toolpath + De basisgeometrie voor dit gereedschapspad @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ongeldige hoek van de snijrand %.2f, moet >=0° en <90° zijn + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Kenmerk %s.%s kan niet als cirkelvormig gat worden verwerkt - gelieve deze uit de lijst met basisgeometrieën te verwijderen. + + + Face appears misaligned after initial rotation. + Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. + + + + Multiple faces in Base Geometry. + Meerdere vlakken in de basisgeometrie. + + + + Depth settings will be applied to all faces. + Diepte-instellingen zullen op alle vlakken toegepast worden. + + + + EnableRotation property is 'Off'. + EnableRotation-eigenschap is 'Uit'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Toegenomen naar de standaard top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Geselecteerde functie(s) vereist/vereisen 'Rotatie inschakelen: B(y)' voor toegang. - - - Face appears misaligned after initial rotation. - Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. - - - - Multiple faces in Base Geometry. - Meerdere vlakken in de basisgeometrie. - - - - Depth settings will be applied to all faces. - Diepte-instellingen zullen op alle vlakken toegepast worden. - - - - EnableRotation property is 'Off'. - EnableRotation-eigenschap is 'Uit'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathPocket + + + Pocket Shape + Vorm van de uitsparing + + + + Creates a Path Pocket object from a face or faces + Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken + Normal @@ -2043,16 +2053,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Final depth set below ZMin of face(s) selected. Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd. - - - Pocket Shape - Vorm van de uitsparing - - - - Creates a Path Pocket object from a face or faces - Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken - 3D Pocket @@ -2186,16 +2186,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Face Profile Vlakprofiel - - - For open edges, verify Final Depth for this operation. - Voor de geopende randen, controleer de eind diepte voor deze bewerking. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + Voor de geopende randen, controleer de eind diepte voor deze bewerking. + Profile based on face or faces @@ -3474,16 +3474,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Dressup - - - Dress-up - Verkleding - - - - Creates a Path Dess-up object from a selected path - Maakt een padverkledingsobject uit een geselecteerd pad - Please select one path object @@ -3503,6 +3493,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select a Path object Gelieve een padobject te selecteren + + + Dress-up + Verkleding + + + + Creates a Path Dess-up object from a selected path + Maakt een padverkledingsobject uit een geselecteerd pad + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Hop object Maakt een Padsprongobject + + + The selected object is not a path + + Het geselecteerde object is geen pad + + Please select one path object @@ -3990,13 +3997,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Hop Sprong maken - - - The selected object is not a path - - Het geselecteerde object is geen pad - - Path_Inspect @@ -4246,11 +4246,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Sanity - - - The Job has no selected Base object. - Er is geen geselecteerd basisobject voor de taak. - Check the path job for common errors @@ -4501,6 +4496,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Date Datum + + + The Job has no selected Base object. + Er is geen geselecteerd basisobject voor de taak. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_ToolController + + + Tool Number to Load + Te laden gereedschapsnummer + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Add Tool Controller Gereedschapsregelaar toevoegen - - - Tool Number to Load - Te laden gereedschapsnummer - Path_ToolTable @@ -4703,6 +4703,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a medial line engraving path Maakt een middelste lijn graveer pad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve vereist een graverende snijder met CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Engraver Cutting Edge Angle must be < 180 degrees. Engraver snij-hoek moet < 180 graden zijn. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve vereist een graverende snijder met CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Save toolbit library Toolbit-bibliotheek opslaan + + + Tooltable JSON (*.json) + Gereedschapstafel JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-gereedschapstafel (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-gereedschapstafel (*.tbl) + Open tooltable Open gereedschapstafel + + + Save tooltable + Gereedschapstafel opslaan + + + + Rename Tooltable + Hernoem gereedschapstabel + + + + Enter Name: + Naam invoeren: + + + + Add New Tool Table + Voeg nieuwe gereedschapstabel toe + + + + Delete Selected Tool Table + Verwijder de geselecteerde gereedschapstabel + + + + Rename Selected Tool Table + Hernoem de geselecteerde gereedschapstabel + Tooltable editor @@ -4967,11 +5012,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Gereedschapstafel XML (*.xml);;HeeksCAD-gereedschapstafel (*.tooltable) - - - Save tooltable - Gereedschapstafel opslaan - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Object doesn't have a tooltable property Object heeft geen gereedschapstafeleigenschap - - - Rename Tooltable - Hernoem gereedschapstabel - - - - Enter Name: - Naam invoeren: - - - - Add New Tool Table - Voeg nieuwe gereedschapstabel toe - - - - Delete Selected Tool Table - Verwijder de geselecteerde gereedschapstabel - - - - Rename Selected Tool Table - Hernoem de geselecteerde gereedschapstabel - - - - Tooltable JSON (*.json) - Gereedschapstafel JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-gereedschapstafel (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-gereedschapstafel (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm index 4d0be0d4c6..d77c240814 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index c25611e9ae..5d7e23d2d5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Pokaż tymczasowe obiekty konstrukcyjne ścieżki, gdy moduł jest w trybie DEBUGOWANIA. - - - The direction along which dropcutter lines are created - Kierunek tworzenia linii cięcia - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Czy operacja ma być ograniczona przez obiekt podstawowy czy przez ramkę obrysu obiektu bazowego - - - - Step over percentage of the drop cutter path - Procentowa wielkość kroku ścieżki narzędzia - - - - Z-axis offset from the surface of the object - Odsunięcie osi Z od powierzchni obiektu - - - - The Sample Interval. Small values cause long wait times - Przykładowy interwał. Niskie wartości powodują długi okres oczekiwania - - - - Enable optimization which removes unnecessary points from G-Code output - Włącz optymalizację która usuwa nie potrzebne punkty z G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Mniejsze wartości dają drobniejszą i dokładniejszą siatkę. Mniejsze wartości nie zwiększają znacznie czasu przetwarzania. - - - The completion mode for the operation: single or multi-pass - Tryb wykonania operacji: pojedyncza lub wieloprzejściowa - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Kierunek, w którym ścieżka narzędzia powinna przechodzić wokół części: współbieżnie (zgodnie z ruchem wskazówek zegara) lub przeciwbieżnie (przeciwnie do ruchu wskazówek zegara) - Stop index(angle) for rotational scan Indeks końcowy (kąt) dla skanowania obrotowego - - - Ignore areas that proceed below specified depth. - Ignoruj obszary, które sięgają poniżej określonej głębokości. - - - - Depth used to identify waste areas to ignore. - Głębokość używana do identyfikacji obszarów odpadów do zignorowania. - - - - Cut through waste to depth at model edge, releasing the model. - Odetnij odpad ne krawędzi modelu by uwolnić model. - Dropcutter lines are created parallel to this axis. @@ -244,11 +189,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. The path to be copied Ścieżka do skopiowania - - - The base geometry of this toolpath - Podstawowa geometria tej ścieżki narzędzia - The tool controller that will be used to calculate the path @@ -569,6 +509,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Extra offset to apply to the operation. Direction is operation dependent. Dodatkowy offset do operacji. Kierunek jest zależny od operacji. + + + The library to use to generate the path + Biblioteka używana do generowania ścieżki + Start pocketing at center or boundary @@ -669,10 +614,15 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. A material for this object Materiał dla tego obiektu + + + Controls how tool moves around corners. Default=Round + Sposób, w który narzędzia poruszaną się wokół narożników. Domyślnie = dookoła + Maximum distance before a miter join is truncated - Maksymalny dystans pomiędzy stycznymi ukosu jest kadłubowy + Maksymalna odległość przed obcięciem połączenia kątowego @@ -700,14 +650,64 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Ustaw wartość Prawda, jeśli używasz kompensacji promienia frezu - - The library to use to generate the path - Biblioteka używana do generowania ścieżki + + The direction along which dropcutter lines are created + Kierunek tworzenia linii cięcia - - Controls how tool moves around corners. Default=Round - Sposób, w który narzędzia poruszaną się wokół narożników. Domyślnie = dookoła + + Should the operation be limited by the stock object or by the bounding box of the base object + Czy operacja ma być ograniczona przez obiekt podstawowy czy przez ramkę obrysu obiektu bazowego + + + + Step over percentage of the drop cutter path + Procentowa wielkość kroku ścieżki narzędzia + + + + Z-axis offset from the surface of the object + Odsunięcie osi Z od powierzchni obiektu + + + + The Sample Interval. Small values cause long wait times + Przykładowy interwał. Niskie wartości powodują długi okres oczekiwania + + + + Enable optimization which removes unnecessary points from G-Code output + Włącz optymalizację która usuwa nie potrzebne punkty z G-Code + + + + The completion mode for the operation: single or multi-pass + Tryb wykonania operacji: pojedyncza lub wieloprzejściowa + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Kierunek, w którym ścieżka narzędzia powinna przechodzić wokół części: współbieżnie (zgodnie z ruchem wskazówek zegara) lub przeciwbieżnie (przeciwnie do ruchu wskazówek zegara) + + + + Ignore areas that proceed below specified depth. + Ignoruj obszary, które sięgają poniżej określonej głębokości. + + + + Depth used to identify waste areas to ignore. + Głębokość używana do identyfikacji obszarów odpadów do zignorowania. + + + + Cut through waste to depth at model edge, releasing the model. + Odetnij odpad ne krawędzi modelu by uwolnić model. + + + + The base geometry of this toolpath + Podstawowa geometria tej ścieżki narzędzia @@ -987,16 +987,16 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Selected tool is not a drill Wybrane narzędzie nie jest wiertłem - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Nieprawidłowy kąt krawędzi tnącej% .2f, musi wynosić <90 ° i> = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1122,6 +1122,31 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Funkcja %s.%s nie może być przetworzona jako okrągły otwór - proszę usunąć ją z listy bazy geometrycznej. + + + Face appears misaligned after initial rotation. + Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. + + + + Multiple faces in Base Geometry. + Wiele ścian w geometrii bazowej. + + + + Depth settings will be applied to all faces. + Ustawienia głębokości zostaną zastosowane do wszystkich ścian. + + + + EnableRotation property is 'Off'. + Właściwość Zezwól na obrót jest wyłączona. + Unable to create path for face(s). @@ -1219,31 +1244,6 @@ Zwiększona do górnej krawędzi materiału. Selected feature(s) require 'Enable Rotation: B(y)' for access. Wybrane funkcje wymagają 'Włącz obrót: B(y)' aby uzyskać dostęp. - - - Face appears misaligned after initial rotation. - Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. - - - - Multiple faces in Base Geometry. - Wiele ścian w geometrii bazowej. - - - - Depth settings will be applied to all faces. - Ustawienia głębokości zostaną zastosowane do wszystkich ścian. - - - - EnableRotation property is 'Off'. - Właściwość Zezwól na obrót jest wyłączona. - Ignoring non-horizontal Face @@ -1992,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Kształt kieszeni + + + + Creates a Path Pocket object from a face or faces + Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy + Normal @@ -2042,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Głębokość końcowa ustawiona poniżej Z min dla wybranej(-ych) powierzchni. - - - Pocket Shape - Kształt kieszeni - - - - Creates a Path Pocket object from a face or faces - Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy - 3D Pocket @@ -2185,16 +2185,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Profil powierzchni - - - For open edges, verify Final Depth for this operation. - W przypadku otwartych krawędzi sprawdź głębokość końcową dla tej operacji. - Check edge selection and Final Depth requirements for profiling open edge(s). Sprawdź wybór krawędzi i wymagania dotyczące głębokości końcowej dla profilowania otwartych krawędzi. + + + For open edges, verify Final Depth for this operation. + W przypadku otwartych krawędzi sprawdź głębokość końcową dla tej operacji. + Profile based on face or faces @@ -2291,7 +2291,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Incremental Step Down of Tool - Przyrostowe krok w dół narzędzia + Przyrostowe obniżanie narzędzia @@ -3477,16 +3477,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Ulepszenia - - - - Creates a Path Dess-up object from a selected path - Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki - Please select one path object @@ -3506,6 +3496,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Proszę wybrać obiekt-ścieżkę + + + Dress-up + Ulepszenia + + + + Creates a Path Dess-up object from a selected path + Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki + Path_DressupAxisMap @@ -3978,6 +3978,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tworzy obiekty Path Hop + + + The selected object is not a path + + Wybrany obiekt nie jest ścieżką + + Please select one path object @@ -3993,13 +4000,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Utwórz skok - - - The selected object is not a path - - Wybrany obiekt nie jest ścieżką - - Path_Inspect @@ -4249,11 +4249,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - Zadanie nie ma wybranego obiektu bazowego. - Check the path job for common errors @@ -4504,6 +4499,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data + + + The Job has no selected Base object. + Zadanie nie ma wybranego obiektu bazowego. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4664,6 +4664,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numer narzędzi do wczytania + Add Tool Controller to the Job @@ -4674,11 +4679,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Dodaj kontroler narzędzi - - - Tool Number to Load - Numer narzędzi do wczytania - Path_ToolTable @@ -4705,6 +4705,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Tworzy ścieżkę grawerowania linii środkowej + + + VCarve requires an engraving cutter with CuttingEdgeAngle + Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4715,11 +4720,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Kąt krawędzi tnącej grawera musi być <180 stopni. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi - Path_Waterline @@ -4754,11 +4754,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Zapisz bibliotekę narzędzi + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otwórz tabelę narzędziową + + + Save tooltable + Zapisz tabelę narzędziową + + + + Rename Tooltable + Zmień nazwę tabeli narzędzi + + + + Enter Name: + Wprowadź nazwę: + + + + Add New Tool Table + Dodaj nową tabelę narzędzi + + + + Delete Selected Tool Table + Usuń zaznaczoną tabelę narzędzi + + + + Rename Selected Tool Table + Zmień nazwę zaznaczonej tabeli narzędzi + Tooltable editor @@ -4969,11 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela narzędziowa XML (*.xml); tabela HeeksCAD (*.tooltable) - - - Save tooltable - Zapisz tabelę narzędziową - Tooltable XML (*.xml) @@ -4989,46 +5029,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiekt nie ma właściwości tooltable - - - Rename Tooltable - Zmień nazwę tabeli narzędzi - - - - Enter Name: - Wprowadź nazwę: - - - - Add New Tool Table - Dodaj nową tabelę narzędzi - - - - Delete Selected Tool Table - Usuń zaznaczoną tabelę narzędzi - - - - Rename Selected Tool Table - Zmień nazwę zaznaczonej tabeli narzędzi - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index e08ba071a2..481ea1148a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra os objetos temporários de construção de trajetória quando o módulo está no modo DEBUG. - - - The direction along which dropcutter lines are created - A direção ao longo da qual as linhas de corte são criadas - - - - Should the operation be limited by the stock object or by the bounding box of the base object - A operação deve ser limitada pelo objeto das ações ou pela caixa delimitadora do objeto base - - - - Step over percentage of the drop cutter path - Passo a percentagem do caminho do cortador de gota - - - - Z-axis offset from the surface of the object - Deslocamento do eixo-z da superfície do objeto - - - - The Sample Interval. Small values cause long wait times - O intervalo de amostragem. Pequenos valores causam tempos de longa espera - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar otimização que remove pontos desnecessários do G-Code gerado - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Valores menores produzem uma malha melhor e mais precisa. No entanto, não aumentam muito o tempo de processamento. - - - The completion mode for the operation: single or multi-pass - O modo de conclusão da operação: único ou multipasse - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - A direção do caminho da ferramenta ao redor da peça deve ser: Sentido horário(CW) ou Sentido anti-horário(CCW) - Stop index(angle) for rotational scan Parar índice(ângulo) para a verificação rotativa - - - Ignore areas that proceed below specified depth. - Ignorar áreas que se desenrolam abaixo da profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de resíduos para ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Corte os resíduos para profundidade na borda do modelo, libertando o modelo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra a ser aplicado à operação. A direção depende da operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Um material para este objeto + + + Controls how tool moves around corners. Default=Round + Controla como a ferramenta se move nos cantos. Padrão=Redondo(boleado) + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Torne verdadeiro, se está usando a compensação do raio do cortador - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The direction along which dropcutter lines are created + A direção ao longo da qual as linhas de corte são criadas - - Controls how tool moves around corners. Default=Round - Controla como a ferramenta se move nos cantos. Padrão=Redondo(boleado) + + Should the operation be limited by the stock object or by the bounding box of the base object + A operação deve ser limitada pelo objeto das ações ou pela caixa delimitadora do objeto base + + + + Step over percentage of the drop cutter path + Passo a percentagem do caminho do cortador de gota + + + + Z-axis offset from the surface of the object + Deslocamento do eixo-z da superfície do objeto + + + + The Sample Interval. Small values cause long wait times + O intervalo de amostragem. Pequenos valores causam tempos de longa espera + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar otimização que remove pontos desnecessários do G-Code gerado + + + + The completion mode for the operation: single or multi-pass + O modo de conclusão da operação: único ou multipasse + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + A direção do caminho da ferramenta ao redor da peça deve ser: Sentido horário(CW) ou Sentido anti-horário(CCW) + + + + Ignore areas that proceed below specified depth. + Ignorar áreas que se desenrolam abaixo da profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de resíduos para ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Corte os resíduos para profundidade na borda do modelo, libertando o modelo. + + + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina %.2f inválido, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Objeto %s.%s não pode ser processado como um furo circular - por favor, remove-o da lista de geometria Base. + + + Face appears misaligned after initial rotation. + A face parece desalinhada após a rotação inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar a propriedade 'InverseAngle' e recalcular. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Configurações de profundidade serão aplicadas a todas as faces. + + + + EnableRotation property is 'Off'. + A propriedade HabilitarRotação está 'Desligada'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Aumentando para o topo do estoque. Selected feature(s) require 'Enable Rotation: B(y)' for access. Os objeto(s) selecionado(s) requerem 'Ativar rotação: B(x)' para acesso. - - - Face appears misaligned after initial rotation. - A face parece desalinhada após a rotação inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar a propriedade 'InverseAngle' e recalcular. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Configurações de profundidade serão aplicadas a todas as faces. - - - - EnableRotation property is 'Off'. - A propriedade HabilitarRotação está 'Desligada'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2043,16 +2053,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Final depth set below ZMin of face(s) selected. Profundidade final definida abaixo de ZMin para faces selecionadas. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -2186,16 +2186,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Face Profile Perfil de face - - - For open edges, verify Final Depth for this operation. - Para arestas abertas, verifique a profundidade final para esta operação. - Check edge selection and Final Depth requirements for profiling open edge(s). Verificar seleção de aresta e requisitos de profundidade final para criar perfil(perfis) de aresta(s) aberta(s). + + + For open edges, verify Final Depth for this operation. + Para arestas abertas, verifique a profundidade final para esta operação. + Profile based on face or faces @@ -3474,16 +3474,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Dressup - - - Dress-up - Trajetória adicional - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de vestimento a partir de uma trajetória selecionada - Please select one path object @@ -3503,6 +3493,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Trajetória adicional + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de vestimento a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Hop object Cria uma trajetória de salto + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3990,13 +3997,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4246,11 +4246,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Sanity - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - Check the path job for common errors @@ -4501,6 +4496,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Date Data + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4703,6 +4703,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a medial line engraving path Cria uma trajetória de gravação de linha mediana + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requer um cortador de gravura com CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Engraver Cutting Edge Angle must be < 180 degrees. Ângulo de corte da borda deve ser de < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requer um cortador de gravura com CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Save toolbit library Salvar biblioteca de brocas + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Renomear tabela de ferramentas + + + + Enter Name: + Digite o Nome: + + + + Add New Tool Table + Adicionar nova tabela de ferramentas + + + + Delete Selected Tool Table + Excluir tabela de ferramentas selecionada + + + + Rename Selected Tool Table + Renomear a tabela de ferramentas selecionada + Tooltable editor @@ -4967,11 +5012,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Renomear tabela de ferramentas - - - - Enter Name: - Digite o Nome: - - - - Add New Tool Table - Adicionar nova tabela de ferramentas - - - - Delete Selected Tool Table - Excluir tabela de ferramentas selecionada - - - - Rename Selected Tool Table - Renomear a tabela de ferramentas selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index acacd524d6..94190b9719 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra os objetos temporários de construção do caminho quando o módulo está no modo DEBUG. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Deslocamento no eixo Z desde a superfície do objeto - - - - The Sample Interval. Small values cause long wait times - Intervalo de amostragem. Valores pequenos causam longas esperas - - - - Enable optimization which removes unnecessary points from G-Code output - Habilitar otimização que remove pontos desnecessários do resultado G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Valores menores resultam numa malha mais fina e mais precisa. Valores menores não aumentam muito o tempo de processamento. - - - The completion mode for the operation: single or multi-pass - O modo de conclusão da operação: passagem única ou múltipla - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignorar áreas que continuam abaixo da profundidade especificada. - - - - Depth used to identify waste areas to ignore. - Profundidade usada para identificar áreas de desperdício a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra para aplicar à operação. Direção é dependente de operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Um material para este objeto + + + Controls how tool moves around corners. Default=Round + Controla como se move a ferramenta nas esquinas. Predefinido=Redondo(boleado) + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Controla como se move a ferramenta nas esquinas. Predefinido=Redondo(boleado) + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Deslocamento no eixo Z desde a superfície do objeto + + + + The Sample Interval. Small values cause long wait times + Intervalo de amostragem. Valores pequenos causam longas esperas + + + + Enable optimization which removes unnecessary points from G-Code output + Habilitar otimização que remove pontos desnecessários do resultado G-Code + + + + The completion mode for the operation: single or multi-pass + O modo de conclusão da operação: passagem única ou múltipla + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignorar áreas que continuam abaixo da profundidade especificada. + + + + Depth used to identify waste areas to ignore. + Profundidade usada para identificar áreas de desperdício a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina inválido %.2f, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Objeto %s.%s não pode ser processado como um furo circular - por favor, remover da lista de geometria Base. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Perfil de face - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Cobrir - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Cobrir + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Cria objeto de ressalto da trajetória + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Data + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Introduzir Nome: + + + + Add New Tool Table + Adicionar Nova Tabela de Ferramenta + + + + Delete Selected Tool Table + Excluir Tabela de Ferramenta Selecionada + + + + Rename Selected Tool Table + Renomear a Tabela de Ferramenta Selecionada + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Introduzir Nome: - - - - Add New Tool Table - Adicionar Nova Tabela de Ferramenta - - - - Delete Selected Tool Table - Excluir Tabela de Ferramenta Selecionada - - - - Rename Selected Tool Table - Renomear a Tabela de Ferramenta Selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index 0774b60415..851f35b476 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - Direcția de-a lungul căreia liniile dropcutter sunt create - - - - Should the operation be limited by the stock object or by the bounding box of the base object - În cazul în care operațiunea este limitată pentru obiectul stock sau de limitele parlelipipedului obiectului de bză - - - - Step over percentage of the drop cutter path - Pas peste procentajul traiectoriei de dropcutter - - - - Z-axis offset from the surface of the object - Deplasarea axei Z de la suprafața obiectului - - - - The Sample Interval. Small values cause long wait times - Interval de eșantionare. Valorile mai mici generează timp de așteptarea mai mari - - - - Enable optimization which removes unnecessary points from G-Code output - Permite optimizarea care elimină punctele inutile din codul G-Code rezultat - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Calea de acces de copiat - - - The base geometry of this toolpath - Geometria bază a traiectoriei sculei - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. + + + The library to use to generate the path + Bibliotecă de utilizat pentru a genera traiectoria + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material pentru acest obiect + + + Controls how tool moves around corners. Default=Round + Controlează modul în care scula se mişcă în jurul colturi. Implicit = rotund + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Bibliotecă de utilizat pentru a genera traiectoria + + The direction along which dropcutter lines are created + Direcția de-a lungul căreia liniile dropcutter sunt create - - Controls how tool moves around corners. Default=Round - Controlează modul în care scula se mişcă în jurul colturi. Implicit = rotund + + Should the operation be limited by the stock object or by the bounding box of the base object + În cazul în care operațiunea este limitată pentru obiectul stock sau de limitele parlelipipedului obiectului de bză + + + + Step over percentage of the drop cutter path + Pas peste procentajul traiectoriei de dropcutter + + + + Z-axis offset from the surface of the object + Deplasarea axei Z de la suprafața obiectului + + + + The Sample Interval. Small values cause long wait times + Interval de eșantionare. Valorile mai mici generează timp de așteptarea mai mari + + + + Enable optimization which removes unnecessary points from G-Code output + Permite optimizarea care elimină punctele inutile din codul G-Code rezultat + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + Geometria bază a traiectoriei sculei @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Unghiul muchiei tăietoare este invalid %.2f, trebuie să fie < 90 ° şi > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Caracteristica %s.%s nu pot fi procesate ca un orificiu circular - vă rugăm să o înlăturaţi din lista de geometrie de Bază. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de buzunar + + + + Creates a Path Pocket object from a face or faces + Creează un obiect tip buzunar plecând de la muchii sau o suprafață + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma de buzunar - - - - Creates a Path Pocket object from a face or faces - Creează un obiect tip buzunar plecând de la muchii sau o suprafață - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Profil de față - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Traiectorie adițională - - - - Creates a Path Dess-up object from a selected path - Creează un obiect traiectorie adițională plecând de la un parcurs selecționat - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vă rugăm să selectaţi un obiect traiecorie + + + Dress-up + Traiectorie adițională + + + + Creates a Path Dess-up object from a selected path + Creează un obiect traiectorie adițională plecând de la un parcurs selecționat + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creează un obiect salt + + + The selected object is not a path + + Obiectul selectat nu este o traiectorie + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Creați un salt - - - The selected object is not a path - - Obiectul selectat nu este o traiectorie - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - Sarcina de lucru nu are obiect în Baza selecționată. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + Sarcina de lucru nu are obiect în Baza selecționată. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numărul uneltei de încărcat + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adăugare dispozitiv de control a sculei - - - Tool Number to Load - Numărul uneltei de încărcat - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabelă de scule JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de scule HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabelă de scule LinuxCNC (*.tbl) + Open tooltable Deschide tabela de scule + + + Save tooltable + Salvarea tabelei de scule + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de scule XML (*.xml);Masă de scule HeeksCAD (*.tooltable) - - - Save tooltable - Salvarea tabelei de scule - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiectul nu are o proprietate în tabelul de scule - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tabelă de scule JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de scule HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabelă de scule LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index 43bf092b77..34e9fe3d02 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Показывать временные path при построении модуля в режиме DEBUG. - - - The direction along which dropcutter lines are created - Направление вдоль которого создаются линии резака - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Операция должна быть ограничена заготовкой или ограничительной рамкой базового объекта - - - - Step over percentage of the drop cutter path - Процент превышения пути фрезы - - - - Z-axis offset from the surface of the object - Смещение оси Z от поверхности объекта - - - - The Sample Interval. Small values cause long wait times - Интервал выборки. Малые значения вызывают долгое ожидание - - - - Enable optimization which removes unnecessary points from G-Code output - Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. - - - The completion mode for the operation: single or multi-pass - Режим завершения обработки: одно- или многопроходная - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки - Stop index(angle) for rotational scan Конечный индекс (угол) для вращающегося сканирования - - - Ignore areas that proceed below specified depth. - Игнорировать области, которые идут ниже указанной глубины. - - - - Depth used to identify waste areas to ignore. - Глубина, используемая для выявления областей отходов, чтобы игнорировать. - - - - Cut through waste to depth at model edge, releasing the model. - Резать через отходы до глубины края модели, освобождая модель. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Траектория для копирования - - - The base geometry of this toolpath - Базовая фигура для пути инструмента - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Дополнительное смещение применяется к операции. Направление зависит от операции. + + + The library to use to generate the path + Библиотека, используемая для создания траектории + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Материал объекта + + + Controls how tool moves around corners. Default=Round + Контролирует, как инструмент движется вокруг углов. По умолчанию = Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Установить в Истину, если используется компенсация радиуса инструмента - - The library to use to generate the path - Библиотека, используемая для создания траектории + + The direction along which dropcutter lines are created + Направление вдоль которого создаются линии резака - - Controls how tool moves around corners. Default=Round - Контролирует, как инструмент движется вокруг углов. По умолчанию = Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Операция должна быть ограничена заготовкой или ограничительной рамкой базового объекта + + + + Step over percentage of the drop cutter path + Процент превышения пути фрезы + + + + Z-axis offset from the surface of the object + Смещение оси Z от поверхности объекта + + + + The Sample Interval. Small values cause long wait times + Интервал выборки. Малые значения вызывают долгое ожидание + + + + Enable optimization which removes unnecessary points from G-Code output + Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) + + + + The completion mode for the operation: single or multi-pass + Режим завершения обработки: одно- или многопроходная + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки + + + + Ignore areas that proceed below specified depth. + Игнорировать области, которые идут ниже указанной глубины. + + + + Depth used to identify waste areas to ignore. + Глубина, используемая для выявления областей отходов, чтобы игнорировать. + + + + Cut through waste to depth at model edge, releasing the model. + Резать через отходы до глубины края модели, освобождая модель. + + + + The base geometry of this toolpath + Базовая фигура для пути инструмента @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Неверный угол режущей кромки %.2f, должен быть >0° и <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Недопустимый угол режущей кромки %.2f, должно быть <90° и >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Неверный угол режущей кромки %.2f, должен быть >0° и <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Функция %s.%s не может быть обработана, как круглое отверстие, - удалите из списка базовой геометрии. + + + Face appears misaligned after initial rotation. + Грань станет неправильно выравнена после первоначального вращения. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. + + + + Multiple faces in Base Geometry. + Несколько граней в Базовой геометрии. + + + + Depth settings will be applied to all faces. + Настройки глубины будут применены ко всем граням. + + + + EnableRotation property is 'Off'. + Свойство позволить Вращение (EnableRotation) выключено. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Выбранные функции требуют - «Включить вращение: B(y)». - - - Face appears misaligned after initial rotation. - Грань станет неправильно выравнена после первоначального вращения. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. - - - - Multiple faces in Base Geometry. - Несколько граней в Базовой геометрии. - - - - Depth settings will be applied to all faces. - Настройки глубины будут применены ко всем граням. - - - - EnableRotation property is 'Off'. - Свойство позволить Вращение (EnableRotation) выключено. - Ignoring non-horizontal Face @@ -1992,6 +1992,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Форма кармана + + + + Creates a Path Pocket object from a face or faces + Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани + Normal @@ -2042,16 +2052,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Конечная глубина ниже заданного ZMin. - - - Pocket Shape - Форма кармана - - - - Creates a Path Pocket object from a face or faces - Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани - 3D Pocket @@ -2185,16 +2185,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Профиль Грани - - - For open edges, verify Final Depth for this operation. - Для открытых краев проверьте Конечную Глубину для этой операции. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + Для открытых краев проверьте Конечную Глубину для этой операции. + Profile based on face or faces @@ -3473,16 +3473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Модифицировать - - - - Creates a Path Dess-up object from a selected path - Создаёт дополнения для выбранной траектории - Please select one path object @@ -3502,6 +3492,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Пожалуйста выберите Путь объект + + + Dress-up + Модифицировать + + + + Creates a Path Dess-up object from a selected path + Создаёт дополнения для выбранной траектории + Path_DressupAxisMap @@ -3974,6 +3974,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Создает объект шага пути + + + The selected object is not a path + + Выделенный объект не является путём + + Please select one path object @@ -3989,13 +3996,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Создать Шаг - - - The selected object is not a path - - Выделенный объект не является путём - - Path_Inspect @@ -4245,11 +4245,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - Задание не имеет выбранного базового объекта. - Check the path job for common errors @@ -4500,6 +4495,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Дата + + + The Job has no selected Base object. + Задание не имеет выбранного базового объекта. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Номер инструмента для загрузки + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Добавить Контроллер Инструмента - - - Tool Number to Load - Номер инструмента для загрузки - Path_ToolTable @@ -4702,6 +4702,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4751,11 +4751,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Сохранить библиотеку инструментов + + + Tooltable JSON (*.json) + Таблица инструментов JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Таблица инструментов HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Таблица инструментов LinuxCNC (*.tbl) + Open tooltable Открыть таблицу инструментов + + + Save tooltable + Сохранить таблицу инструментов + + + + Rename Tooltable + Переименовать таблицу инструментов + + + + Enter Name: + Введите имя: + + + + Add New Tool Table + Добавить новую таблицу инструментов + + + + Delete Selected Tool Table + Удалить выбранную таблицу инструментов + + + + Rename Selected Tool Table + Переименовать выбранную таблицу инструментов + Tooltable editor @@ -4966,11 +5011,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Таблица инструментов XML (*.xml); Таблица инструментов HeeksCAD (*.tooltable) - - - Save tooltable - Сохранить таблицу инструментов - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Объект не содержит таблицу инструментов - - - Rename Tooltable - Переименовать таблицу инструментов - - - - Enter Name: - Введите имя: - - - - Add New Tool Table - Добавить новую таблицу инструментов - - - - Delete Selected Tool Table - Удалить выбранную таблицу инструментов - - - - Rename Selected Tool Table - Переименовать выбранную таблицу инструментов - - - - Tooltable JSON (*.json) - Таблица инструментов JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Таблица инструментов HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Таблица инструментов LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index eb61b97f15..9cceebd513 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Ko je modul v razhroščevalnem načinu, prikaži začasni predmet za ustvarjanje poti. - - - The direction along which dropcutter lines are created - Smer vzdolž katere so ustvarjene črte spustnega razkanja - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Naj bo opravilo omejeno s predmetom iz zaloge ali z mejnim kvadrom osnovnega predmeta - - - - Step over percentage of the drop cutter path - Odstotek prekoračenja poti spustnega rezkalnika - - - - Z-axis offset from the surface of the object - Odmik osi Z od površine predmeta - - - - The Sample Interval. Small values cause long wait times - Vzorčni korak. Majhne vrednosti povzročijo dolge čakalne čase - - - - Enable optimization which removes unnecessary points from G-Code output - Omogoči optimizacijo ki odstrani odvečne točke iz izhodne G-kode - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Manjše vrednosti prinašajo drobnejše, natančnejše ploskovje, hkrati pa ne podaljšajo obdelovalnega časa preveč. - - - The completion mode for the operation: single or multi-pass - Način dokončanja opravila: eno ali večpreletno - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Smer vzdolž katere bi morala pot orodja potekati okoli dela: Vzpenjajoča (v smeri urinega kazalca) ali Običajna (v nasprotni smeri urnega kazalca) - Stop index(angle) for rotational scan Pokazatelj zaustavitve (kot) pri sukajočem pregledu - - - Ignore areas that proceed below specified depth. - Prezri področja pod določeno globino. - - - - Depth used to identify waste areas to ignore. - Globina uporabljena za prepoznavanje področji z odpadom, ki bodo prezrta. - - - - Cut through waste to depth at model edge, releasing the model. - Reži skozi odpad do globine na robu modela s sprostitvijo modela. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Pot za kopiranje - - - The base geometry of this toolpath - Osnovna geometrija te poti orodja - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Pri opravilih naj se uporabi dodaten odmik. Smer je odvisna od opravila. + + + The library to use to generate the path + Knjižnica, ki se jo uporabi pri ustvarjanju poti + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Material tega predmeta + + + Controls how tool moves around corners. Default=Round + Nadzira, kako se orodje premika okoli vogalov. Privzeto=Okroglo + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Nastavi Prav, če se uporablja Popravek polmira rezkarja - - The library to use to generate the path - Knjižnica, ki se jo uporabi pri ustvarjanju poti + + The direction along which dropcutter lines are created + Smer vzdolž katere so ustvarjene črte spustnega razkanja - - Controls how tool moves around corners. Default=Round - Nadzira, kako se orodje premika okoli vogalov. Privzeto=Okroglo + + Should the operation be limited by the stock object or by the bounding box of the base object + Naj bo opravilo omejeno s predmetom iz zaloge ali z mejnim kvadrom osnovnega predmeta + + + + Step over percentage of the drop cutter path + Odstotek prekoračenja poti spustnega rezkalnika + + + + Z-axis offset from the surface of the object + Odmik osi Z od površine predmeta + + + + The Sample Interval. Small values cause long wait times + Vzorčni korak. Majhne vrednosti povzročijo dolge čakalne čase + + + + Enable optimization which removes unnecessary points from G-Code output + Omogoči optimizacijo ki odstrani odvečne točke iz izhodne G-kode + + + + The completion mode for the operation: single or multi-pass + Način dokončanja opravila: eno ali večpreletno + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Smer vzdolž katere bi morala pot orodja potekati okoli dela: Vzpenjajoča (v smeri urinega kazalca) ali Običajna (v nasprotni smeri urnega kazalca) + + + + Ignore areas that proceed below specified depth. + Prezri področja pod določeno globino. + + + + Depth used to identify waste areas to ignore. + Globina uporabljena za prepoznavanje področji z odpadom, ki bodo prezrta. + + + + Cut through waste to depth at model edge, releasing the model. + Reži skozi odpad do globine na robu modela s sprostitvijo modela. + + + + The base geometry of this toolpath + Osnovna geometrija te poti orodja @@ -986,16 +986,16 @@ Selected tool is not a drill Izbrano orodje ni sveder - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Neveljaven kót rezilnega roba %.2f, biti mora <90° in >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Značilnost %s.%s ne more biti obdelana kot krožna luknja - prosim odstrani jo iz seznama Osnovne geometrije. + + + Face appears misaligned after initial rotation. + Ploskev je videti po začetnem sukanju neporavnana. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. + + + + Multiple faces in Base Geometry. + Večkratne ploskve v Osnovni geometriji. + + + + Depth settings will be applied to all faces. + Nastavitev globine bo uporabljena na vseh ploskvah. + + + + EnableRotation property is 'Off'. + Lastnost OmogočiSukanje je "Izklopljena". + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Povišano na vrh obdelovanca. Selected feature(s) require 'Enable Rotation: B(y)' for access. Izbrane značilnosti za dostop potrebujejo "Omogočenje sukanja: B(y)". - - - Face appears misaligned after initial rotation. - Ploskev je videti po začetnem sukanju neporavnana. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. - - - - Multiple faces in Base Geometry. - Večkratne ploskve v Osnovni geometriji. - - - - Depth settings will be applied to all faces. - Nastavitev globine bo uporabljena na vseh ploskvah. - - - - EnableRotation property is 'Off'. - Lastnost OmogočiSukanje je "Izklopljena". - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Oblika ugreza + + + + Creates a Path Pocket object from a face or faces + Ustvari pot ugreza iz ploskve ali ploskev + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev). - - - Pocket Shape - Oblika ugreza - - - - Creates a Path Pocket object from a face or faces - Ustvari pot ugreza iz ploskve ali ploskev - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Oris ploskve - - - For open edges, verify Final Depth for this operation. - Pri odprtih robovih preveri končno glibino tega dejanja. - Check edge selection and Final Depth requirements for profiling open edge(s). Preveri izbor robov in zahteve končne globine za orisovanje odprtega roba(ov). + + + For open edges, verify Final Depth for this operation. + Pri odprtih robovih preveri končno glibino tega dejanja. + Profile based on face or faces @@ -3474,16 +3474,6 @@ privzeto=10,0. Path_Dressup - - - Dress-up - Dodelava - - - - Creates a Path Dess-up object from a selected path - Ustvari iz izbrane poti predmet dodelave poti - Please select one path object @@ -3503,6 +3493,16 @@ privzeto=10,0. Please select a Path object Izberite pot + + + Dress-up + Dodelava + + + + Creates a Path Dess-up object from a selected path + Ustvari iz izbrane poti predmet dodelave poti + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ privzeto=10,0. Creates a Path Hop object Ustvari predmet skoka poti + + + The selected object is not a path + + Izbrani predmet ni pot + + Please select one path object @@ -3990,13 +3997,6 @@ privzeto=10,0. Create Hop Ustvari skok - - - The selected object is not a path - - Izbrani predmet ni pot - - Path_Inspect @@ -4246,11 +4246,6 @@ privzeto=10,0. Path_Sanity - - - The Job has no selected Base object. - Opravilo nima izbranega osnovnega predmeta. - Check the path job for common errors @@ -4501,6 +4496,11 @@ privzeto=10,0. Date Datum + + + The Job has no selected Base object. + Opravilo nima izbranega osnovnega predmeta. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ privzeto=10,0. Path_ToolController + + + Tool Number to Load + Številka orodja za nalaganje + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ privzeto=10,0. Add Tool Controller Dodaj orodni krmilnik - - - Tool Number to Load - Številka orodja za nalaganje - Path_ToolTable @@ -4703,6 +4703,11 @@ privzeto=10,0. Creates a medial line engraving path Ustvari vrezovalno pot po srednjici + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve potrebuje vrezovalnik s kotom rezilnega roba + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ privzeto=10,0. Engraver Cutting Edge Angle must be < 180 degrees. Rezilni kót vrezovalnika mora biti < 180 stopnij. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve potrebuje vrezovalnik s kotom rezilnega roba - Path_Waterline @@ -4752,11 +4752,56 @@ privzeto=10,0. Save toolbit library Shrani knjižnico orodnih nastavkov + + + Tooltable JSON (*.json) + Preglednica orodij JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-ova preglednica orodij (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-jeva preglednica orodij (*.tbl) + Open tooltable Odpri preglednico orodij + + + Save tooltable + Shrani preglednico orodij + + + + Rename Tooltable + Preimenuj orodno mizo + + + + Enter Name: + Vnesite ime: + + + + Add New Tool Table + Dodaj novo preglednico orodij + + + + Delete Selected Tool Table + Izbriši izbrano preglednico orodij + + + + Rename Selected Tool Table + Preimenuj izbrano preglednico orodij + Tooltable editor @@ -4967,11 +5012,6 @@ privzeto=10,0. Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Preglednica orodij XML (*.xml);;preglednica orodij HeeksCAD (*.tooltable) - - - Save tooltable - Shrani preglednico orodij - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ privzeto=10,0. Object doesn't have a tooltable property Predmet nima lastnosti preglednice orodij - - - Rename Tooltable - Preimenuj orodno mizo - - - - Enter Name: - Vnesite ime: - - - - Add New Tool Table - Dodaj novo preglednico orodij - - - - Delete Selected Tool Table - Izbriši izbrano preglednico orodij - - - - Rename Selected Tool Table - Preimenuj izbrano preglednico orodij - - - - Tooltable JSON (*.json) - Preglednica orodij JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-ova preglednica orodij (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-jeva preglednica orodij (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index 4a8af232d0..74648737fd 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Visa de tillfälliga bankonstruktionsobjekten när modulen är i DEBUG-läge. - - - The direction along which dropcutter lines are created - Riktningen längs vilken dropcutter linjer skapas - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Ska operationen begränsas av stamobjektet eller av grundobjektets begränsningsruta - - - - Step over percentage of the drop cutter path - Steg över procent av drop cutter-banan - - - - Z-axis offset from the surface of the object - Z-axelförskjutning från objektets yta - - - - The Sample Interval. Small values cause long wait times - Exempelintervallet. Små värden orsakar långa väntetider - - - - Enable optimization which removes unnecessary points from G-Code output - Aktivera optimering som tar bort onödiga punkter från G-Code-utdata - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Mindre värden ger ett finare, mer exakt nät. Mindre värden ökar inte bearbetningstiden mycket. - - - The completion mode for the operation: single or multi-pass - Kompletteringsläget för operationen: enkel- eller flerpasspass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Den riktning som verktygsbanan ska gå runt delen: Klättra(Medurs) eller Konventionell(Moturs) - Stop index(angle) for rotational scan Stoppa index(vinkel) för rotationsgenomsökning - - - Ignore areas that proceed below specified depth. - Ignorera områden som fortsätter under angivet djup. - - - - Depth used to identify waste areas to ignore. - Djup som används för att identifiera avfallsområden att ignorera. - - - - Cut through waste to depth at model edge, releasing the model. - Skär genom avfall till djup vid modellkanten, släppa modellen. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - Basgeometri för den här verktygsbanan - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra förskjutning att gälla för operationen. Riktning är driftberoende. + + + The library to use to generate the path + Biblioteket som används för att generera banan + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Ett material för det här objektet + + + Controls how tool moves around corners. Default=Round + Styr hur verktyget flyttas runt hörn. Standard=Omgång + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Gör True, om du använder Cutter Radius Compensation - - The library to use to generate the path - Biblioteket som används för att generera banan + + The direction along which dropcutter lines are created + Riktningen längs vilken dropcutter linjer skapas - - Controls how tool moves around corners. Default=Round - Styr hur verktyget flyttas runt hörn. Standard=Omgång + + Should the operation be limited by the stock object or by the bounding box of the base object + Ska operationen begränsas av stamobjektet eller av grundobjektets begränsningsruta + + + + Step over percentage of the drop cutter path + Steg över procent av drop cutter-banan + + + + Z-axis offset from the surface of the object + Z-axelförskjutning från objektets yta + + + + The Sample Interval. Small values cause long wait times + Exempelintervallet. Små värden orsakar långa väntetider + + + + Enable optimization which removes unnecessary points from G-Code output + Aktivera optimering som tar bort onödiga punkter från G-Code-utdata + + + + The completion mode for the operation: single or multi-pass + Kompletteringsläget för operationen: enkel- eller flerpasspass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Den riktning som verktygsbanan ska gå runt delen: Klättra(Medurs) eller Konventionell(Moturs) + + + + Ignore areas that proceed below specified depth. + Ignorera områden som fortsätter under angivet djup. + + + + Depth used to identify waste areas to ignore. + Djup som används för att identifiera avfallsområden att ignorera. + + + + Cut through waste to depth at model edge, releasing the model. + Skär genom avfall till djup vid modellkanten, släppa modellen. + + + + The base geometry of this toolpath + Basgeometri för den här verktygsbanan @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ogiltig Skäreggsvinkel %.2f, måste vara <90° och >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Funktionen %s.%s kan inte bearbetas som ett cirkulärt hål - ta bort från listan med basgeometri. + + + Face appears misaligned after initial rotation. + Ansikte visas feljusterade efter inledande rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Tänk att växla "InverseAngle" egendom och omjäntar. + + + + Multiple faces in Base Geometry. + Flera ansikten i Basgeometri. + + + + Depth settings will be applied to all faces. + Djupinställningar kommer att tillämpas på alla ansikten. + + + + EnableRotation property is 'Off'. + EnableRotation-egenskapen är 'Av'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Markerad(a) funktion(er) kräver 'Aktivera rotation: B(y)' för åtkomst. - - - Face appears misaligned after initial rotation. - Ansikte visas feljusterade efter inledande rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Tänk att växla "InverseAngle" egendom och omjäntar. - - - - Multiple faces in Base Geometry. - Flera ansikten i Basgeometri. - - - - Depth settings will be applied to all faces. - Djupinställningar kommer att tillämpas på alla ansikten. - - - - EnableRotation property is 'Off'. - EnableRotation-egenskapen är 'Av'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Fickform + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Fickform - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Datum + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Ange namn: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Ange namn: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index afc6c53956..874c186492 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Modül HATA AYIKLAMA kipinde olduğunda geçici 'takım yolu inşa nesnelerini' göster. - - - The direction along which dropcutter lines are created - NoktalıKesim çizgilerinin oluşturulduğu yön - - - - Should the operation be limited by the stock object or by the bounding box of the base object - İşlem, stok nesnesi ya da temel nesnenin sınır kutusu tarafından sınırlanmalıdır - - - - Step over percentage of the drop cutter path - Kesim noktası yolunun yüzdesini aşma - - - - Z-axis offset from the surface of the object - Nesne yüzeyinden Z-eksenine olan mesafe - - - - The Sample Interval. Small values cause long wait times - Örnekleme Aralığı. Küçük değerler uzun bekleme sürelerine neden olur - - - - Enable optimization which removes unnecessary points from G-Code output - G-Kod çıktısında gereksiz noktaları kaldıran optimizasyonu etkinleştir - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Daha küçük değerler, daha iyi ve daha hassas ağ örgüsü sağlar. Bu değerler işleme süresini çok fazla artırmaz. - - - The completion mode for the operation: single or multi-pass - Operasyon için tamamlama modu: Tekil veya çok geçişli - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Takım yolunun parça etrafında dönme yönü: Tırmanış(Saat Yönü) veya Geleneksel(Saat Yönünün Tersi) - Stop index(angle) for rotational scan Dönel tarama için bitiş açısı - - - Ignore areas that proceed below specified depth. - Belirtilen derinliğin altında ilerleyen alanları yok say. - - - - Depth used to identify waste areas to ignore. - Yok sayılacak atık alanlar için derinlik kullanıldı. - - - - Cut through waste to depth at model edge, releasing the model. - Atığı model sınırındaki derinliğe kadar kes, modeli yayınla. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Kopyalanacak yol - - - The base geometry of this toolpath - Bu takım yolunun temel geometrisi - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. + + + The library to use to generate the path + Yolu oluşturmak için kullanılacak kitaplık + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Bu nesne için bir malzeme + + + Controls how tool moves around corners. Default=Round + Takımın köşeler etrafında nasıl hareket ettiğini denetler. Varsayılan = Yuvarlak + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Kesici Yarıçap dengelemesi kullanıyorsanız, Gerçekleştirin - - The library to use to generate the path - Yolu oluşturmak için kullanılacak kitaplık + + The direction along which dropcutter lines are created + NoktalıKesim çizgilerinin oluşturulduğu yön - - Controls how tool moves around corners. Default=Round - Takımın köşeler etrafında nasıl hareket ettiğini denetler. Varsayılan = Yuvarlak + + Should the operation be limited by the stock object or by the bounding box of the base object + İşlem, stok nesnesi ya da temel nesnenin sınır kutusu tarafından sınırlanmalıdır + + + + Step over percentage of the drop cutter path + Kesim noktası yolunun yüzdesini aşma + + + + Z-axis offset from the surface of the object + Nesne yüzeyinden Z-eksenine olan mesafe + + + + The Sample Interval. Small values cause long wait times + Örnekleme Aralığı. Küçük değerler uzun bekleme sürelerine neden olur + + + + Enable optimization which removes unnecessary points from G-Code output + G-Kod çıktısında gereksiz noktaları kaldıran optimizasyonu etkinleştir + + + + The completion mode for the operation: single or multi-pass + Operasyon için tamamlama modu: Tekil veya çok geçişli + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Takım yolunun parça etrafında dönme yönü: Tırmanış(Saat Yönü) veya Geleneksel(Saat Yönünün Tersi) + + + + Ignore areas that proceed below specified depth. + Belirtilen derinliğin altında ilerleyen alanları yok say. + + + + Depth used to identify waste areas to ignore. + Yok sayılacak atık alanlar için derinlik kullanıldı. + + + + Cut through waste to depth at model edge, releasing the model. + Atığı model sınırındaki derinliğe kadar kes, modeli yayınla. + + + + The base geometry of this toolpath + Bu takım yolunun temel geometrisi @@ -986,16 +986,16 @@ Selected tool is not a drill Seçilen araç bir matkap ucu değil - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Geçersiz Kesme kenar açı %.2f,-meli var olmak < 90° ve > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Özellik %s.%s olamaz dairesel delik olarak - işlenen temel geometri listeden kaldırın. + + + Face appears misaligned after initial rotation. + İlk dönüşten sonra yüzeyler hizalanmadı. + + + + Consider toggling the 'InverseAngle' property and recomputing. + TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. + + + + Multiple faces in Base Geometry. + Ana geometrideki çoklu yüzler. + + + + Depth settings will be applied to all faces. + Derinlik ayarları tüm yüzeylere uygulanmış olacak. + + + + EnableRotation property is 'Off'. + DönüşüEtkinleştir özelliği 'Kapalı'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Mevcut üst noktaya arttırıldı. Selected feature(s) require 'Enable Rotation: B(y)' for access. Seçilen özellik(ler) e erişim için 'Döndürmeyi etkinleştir: B(y)' gereklidir. - - - Face appears misaligned after initial rotation. - İlk dönüşten sonra yüzeyler hizalanmadı. - - - - Consider toggling the 'InverseAngle' property and recomputing. - TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. - - - - Multiple faces in Base Geometry. - Ana geometrideki çoklu yüzler. - - - - Depth settings will be applied to all faces. - Derinlik ayarları tüm yüzeylere uygulanmış olacak. - - - - EnableRotation property is 'Off'. - DönüşüEtkinleştir özelliği 'Kapalı'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathPocket + + + Pocket Shape + Cep şekli + + + + Creates a Path Pocket object from a face or faces + Yüz veya yüzlerden Path Pocket nesnesi oluşturur + Normal @@ -2043,16 +2053,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Final depth set below ZMin of face(s) selected. Son derinliği, seçili yüz(ler) in Zmin değeri altına ayarla. - - - Pocket Shape - Cep şekli - - - - Creates a Path Pocket object from a face or faces - Yüz veya yüzlerden Path Pocket nesnesi oluşturur - 3D Pocket @@ -2186,16 +2186,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Face Profile Yüz Profili - - - For open edges, verify Final Depth for this operation. - Açık kenarlar için, bu işlemin Bitiş Derinliğini doğrula. - Check edge selection and Final Depth requirements for profiling open edge(s). Kenar seçimini ve açık kenar(lar) ın profilini çıkarma için Son İşlem Derinliği gereksinimlerini gözden geçirin. + + + For open edges, verify Final Depth for this operation. + Açık kenarlar için, bu işlemin Bitiş Derinliğini doğrula. + Profile based on face or faces @@ -3473,16 +3473,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Dressup - - - Dress-up - Giydirme - - - - Creates a Path Dess-up object from a selected path - Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur - Please select one path object @@ -3502,6 +3492,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Please select a Path object Lütfen bir Yol nesnesi seçin + + + Dress-up + Giydirme + + + + Creates a Path Dess-up object from a selected path + Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur + Path_DressupAxisMap @@ -3974,6 +3974,13 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Hop object Bir nokta nesnesi oluşturur + + + The selected object is not a path + + Seçilen nesne bir yol değil + + Please select one path object @@ -3989,13 +3996,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Hop Kopya oluştur - - - The selected object is not a path - - Seçilen nesne bir yol değil - - Path_Inspect @@ -4245,11 +4245,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Sanity - - - The Job has no selected Base object. - İşin Seçili temel nesnesi yok. - Check the path job for common errors @@ -4500,6 +4495,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Date Tarih + + + The Job has no selected Base object. + İşin Seçili temel nesnesi yok. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4661,6 +4661,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_ToolController + + + Tool Number to Load + Yüklenecek Takım Numarası + Add Tool Controller to the Job @@ -4671,11 +4676,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Add Tool Controller Araç Kumandasını Ekle - - - Tool Number to Load - Yüklenecek Takım Numarası - Path_ToolTable @@ -4702,6 +4702,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a medial line engraving path Bir orta çizgi gravür yolu oluşturur + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4712,11 +4717,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Engraver Cutting Edge Angle must be < 180 degrees. Gravür kesici kenar açısı < 180 derece olmalıdır. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir - Path_Waterline @@ -4751,11 +4751,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Save toolbit library Torna kalemi kitaplığını kaydet + + + Tooltable JSON (*.json) + Araç Tablosu JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD araç tablosu (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC araç tablosu (*.tbl) + Open tooltable Araç masasını açın + + + Save tooltable + Araç masasını kaydet + + + + Rename Tooltable + Torna kalemi yeniden adlandır + + + + Enter Name: + Ad Girin: + + + + Add New Tool Table + Yeni Alet Tablosu Ekle + + + + Delete Selected Tool Table + Seçili Alet Tablosunu Sil + + + + Rename Selected Tool Table + Seçili Araç Tablosunu Yeniden Adlandır + Tooltable editor @@ -4966,11 +5011,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Araç Tabanlı XML (*.xml);; HeeksCAD araç tablosu (*.tooltable) - - - Save tooltable - Araç masasını kaydet - Tooltable XML (*.xml) @@ -4986,46 +5026,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Object doesn't have a tooltable property Nesnenin araç özellikli bir özelliği yok - - - Rename Tooltable - Torna kalemi yeniden adlandır - - - - Enter Name: - Ad Girin: - - - - Add New Tool Table - Yeni Alet Tablosu Ekle - - - - Delete Selected Tool Table - Seçili Alet Tablosunu Sil - - - - Rename Selected Tool Table - Seçili Araç Tablosunu Yeniden Adlandır - - - - Tooltable JSON (*.json) - Araç Tablosu JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD araç tablosu (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC araç tablosu (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 6a11c58303..9f2fa2f99e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Показати тимчасовий шлях побудови об’єктів, коли модуль перебуває в режимі DEBUG. - - - The direction along which dropcutter lines are created - Напрямок, уздовж якого створюються лінії різака - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Якщо операція повинна бути обмежена наявним об'єктом або обмежувальною рамкою базового об'єкта - - - - Step over percentage of the drop cutter path - Відсотковий крок шляху врізання - - - - Z-axis offset from the surface of the object - Зсув осі Z від поверхні об’єкта - - - - The Sample Interval. Small values cause long wait times - Інтервал вибірки. Малі значення викликають тривалий час очікування - - - - Enable optimization which removes unnecessary points from G-Code output - Увімкнути оптимізацію, що видаляє непотрібні точки з виведення G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Менші значення дають більш тонку та точну сітку. Менші значення не збільшують час обробки. - - - The completion mode for the operation: single or multi-pass - Режим завершення операції: одно- або багатопрохідний - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Напрямок, яким повинен проходити шлях інструменту по деталі: Підйом (ClockWise) або Звичайний (CounterClockWise) - Stop index(angle) for rotational scan Індекс зупинки (кут) для обертального сканування - - - Ignore areas that proceed below specified depth. - Ігнорувати ділянки, які проходять нижче вказаної глибини. - - - - Depth used to identify waste areas to ignore. - Глибина використовується для виявлення ділянок відходів, які потрібно ігнорувати. - - - - Cut through waste to depth at model edge, releasing the model. - Розрізати відходи на глибину до краю моделі, щоб звільнити модель. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Траєкторія для копіювання - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Бібліотека, що використовується для створення траєкторії + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Матеріал для цього об'єкту + + + Controls how tool moves around corners. Default=Round + Контролює як інструмент рухається навколо кутів. Default=Round + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Бібліотека, що використовується для створення траєкторії + + The direction along which dropcutter lines are created + Напрямок, уздовж якого створюються лінії різака - - Controls how tool moves around corners. Default=Round - Контролює як інструмент рухається навколо кутів. Default=Round + + Should the operation be limited by the stock object or by the bounding box of the base object + Якщо операція повинна бути обмежена наявним об'єктом або обмежувальною рамкою базового об'єкта + + + + Step over percentage of the drop cutter path + Відсотковий крок шляху врізання + + + + Z-axis offset from the surface of the object + Зсув осі Z від поверхні об’єкта + + + + The Sample Interval. Small values cause long wait times + Інтервал вибірки. Малі значення викликають тривалий час очікування + + + + Enable optimization which removes unnecessary points from G-Code output + Увімкнути оптимізацію, що видаляє непотрібні точки з виведення G-Code + + + + The completion mode for the operation: single or multi-pass + Режим завершення операції: одно- або багатопрохідний + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + Напрямок, яким повинен проходити шлях інструменту по деталі: Підйом (ClockWise) або Звичайний (CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ігнорувати ділянки, які проходять нижче вказаної глибини. + + + + Depth used to identify waste areas to ignore. + Глибина використовується для виявлення ділянок відходів, які потрібно ігнорувати. + + + + Cut through waste to depth at model edge, releasing the model. + Розрізати відходи на глибину до краю моделі, щоб звільнити модель. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 6cfda682c5..495963336a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - The direction along which dropcutter lines are created - La direcció al llarg de la qual es creen les línies dropcutter - - - - Should the operation be limited by the stock object or by the bounding box of the base object - En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - - Step over percentage of the drop cutter path - Pas sobre el percentatge de la trajectòria del dropcutter - - - - Z-axis offset from the surface of the object - Separació de l'eix Z de la superfície de l'objecte - - - - The Sample Interval. Small values cause long wait times - L'interval de mostra. Els valors xicotets causen una llarga espera - - - - Enable optimization which removes unnecessary points from G-Code output - Activa l'optimització que suprimisca els punts innecessaris del resultat G-Code - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Els valors més xicotets produeixen una malla més fina i precisa. Els valors més xicotets no augmenten massa el temps de processament. - - - The completion mode for the operation: single or multi-pass - Mode de compleció per a l'operació: únic o múltiples passos - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - Stop index(angle) for rotational scan Para l'índex(angle) per a l'escàner rotacional - - - Ignore areas that proceed below specified depth. - Ignora les àrees que passen per davall d'una profunditat especificada. - - - - Depth used to identify waste areas to ignore. - Profunditat utilitzada per a identificar àmplies àrees a ignorar. - - - - Cut through waste to depth at model edge, releasing the model. - Retalla els residus fins al fons en la vora del model, alliberant-lo. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Un material per a aquest objecte + + + Controls how tool moves around corners. Default=Round + Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The direction along which dropcutter lines are created + La direcció al llarg de la qual es creen les línies dropcutter - - Controls how tool moves around corners. Default=Round - Controla com es mou l'eina al voltant de les cantonades. Per defecte=redó + + Should the operation be limited by the stock object or by the bounding box of the base object + En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base + + + + Step over percentage of the drop cutter path + Pas sobre el percentatge de la trajectòria del dropcutter + + + + Z-axis offset from the surface of the object + Separació de l'eix Z de la superfície de l'objecte + + + + The Sample Interval. Small values cause long wait times + L'interval de mostra. Els valors xicotets causen una llarga espera + + + + Enable optimization which removes unnecessary points from G-Code output + Activa l'optimització que suprimisca els punts innecessaris del resultat G-Code + + + + The completion mode for the operation: single or multi-pass + Mode de compleció per a l'operació: únic o múltiples passos + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) + + + + Ignore areas that proceed below specified depth. + Ignora les àrees que passen per davall d'una profunditat especificada. + + + + Depth used to identify waste areas to ignore. + Profunditat utilitzada per a identificar àmplies àrees a ignorar. + + + + Cut through waste to depth at model edge, releasing the model. + Retalla els residus fins al fons en la vora del model, alliberant-lo. + + + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. La característica %s.%s no es pot processar com a forat circular; suprimiu-la de la llista de la geometria de base. + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Les funcions seleccionades requereixen «Habilita la rotació: B(y)» per a l'accés. - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - Ignoring non-horizontal Face @@ -1991,6 +1991,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma del buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de buidatge des d'una o vàries cares + Normal @@ -2041,16 +2051,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma del buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de buidatge des d'una o vàries cares - 3D Pocket @@ -2183,16 +2183,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Face Profile Perfil de cara - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3462,16 +3462,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3489,6 +3479,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3961,6 +3961,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3976,12 +3982,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4228,11 +4228,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Sanity - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - Check the path job for common errors @@ -4483,6 +4478,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Date Date + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4638,6 +4638,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4648,11 +4653,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afig un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4679,6 +4679,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4689,11 +4694,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4728,11 +4728,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afig una taula d'eines nova + + + + Delete Selected Tool Table + Elimina la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4943,11 +4988,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4963,46 +5003,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afig una taula d'eines nova - - - - Delete Selected Tool Table - Elimina la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index f755ac5b3c..19d0d607c0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Hiển thị đối tượng cấu trúc đường dẫn tạm thời khi mô-đun ở chế độ GỠ LỖI. - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - Khoảng thời gian mẫu. Các giá trị nhỏ dẫn đến việc phải chờ đợi trong thời gian dài - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied Đường dẫn cần được sao chép - - - The base geometry of this toolpath - Hình dạng cơ sở của đường chạy dao này - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. + + + The library to use to generate the path + Thư viện sử dụng để tạo đường dẫn + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object Một vật liệu cho đối tượng này + + + Controls how tool moves around corners. Default=Round + Kiểm soát cách công cụ di chuyển xung quanh các góc. Mặc định=Vòng + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Thư viện sử dụng để tạo đường dẫn + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - Kiểm soát cách công cụ di chuyển xung quanh các góc. Mặc định=Vòng + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + Khoảng thời gian mẫu. Các giá trị nhỏ dẫn đến việc phải chờ đợi trong thời gian dài + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + Hình dạng cơ sở của đường chạy dao này @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Góc cắt cạnh không hợp lệ %.2f, phải là <90° và >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Không thể xử lý tính năng %s.%s dưới dạng lỗ tròn - vui lòng xóa khỏi danh sách Hình học cơ sở. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hình túi + + + + Creates a Path Pocket object from a face or faces + Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hình túi - - - - Creates a Path Pocket object from a face or faces - Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Cấu hình mặt - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Chức năng xây dựng kết cấu bên ngoài - - - - Creates a Path Dess-up object from a selected path - Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vui lòng chọn đối tượng Đường dẫn + + + Dress-up + Chức năng xây dựng kết cấu bên ngoài + + + + Creates a Path Dess-up object from a selected path + Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tạo một đối tượng đường dẫn bước nhảy + + + The selected object is not a path + + Đối tượng được chọn không phải là một đường dẫn + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Tạo bước nhảy - - - The selected object is not a path - - Đối tượng được chọn không phải là một đường dẫn - - Path_Inspect @@ -4246,11 +4246,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - Công việc không có đối tượng cơ sở đã chọn. - Check the path job for common errors @@ -4501,6 +4496,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + Công việc không có đối tượng cơ sở đã chọn. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4662,6 +4662,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Số công cụ cần tải + Add Tool Controller to the Job @@ -4672,11 +4677,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Thêm bộ điều khiển công cụ - - - Tool Number to Load - Số công cụ cần tải - Path_ToolTable @@ -4703,6 +4703,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4713,11 +4718,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4752,11 +4752,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Công cụ JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Bảng công cụ HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Bảng công cụ LinuxCNC (*.tbl) + Open tooltable Mở hộp công cụ + + + Save tooltable + Lưu hộp công cụ + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4967,11 +5012,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Hộp công cụ XML (*.xml);;Hộp công cụ HeeksCAD (*.tooltable) - - - Save tooltable - Lưu hộp công cụ - Tooltable XML (*.xml) @@ -4987,46 +5027,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Đối tượng không có thuộc tính của hộp công cụ - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Công cụ JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Bảng công cụ HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Bảng công cụ LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index 47ab24bcf3..06d7a7d63d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. 当模块处于DEBUG模式时显示临时路径构造对象。 - - - The direction along which dropcutter lines are created - 沿落刀线创建的方向 - - - - Should the operation be limited by the stock object or by the bounding box of the base object - 操作被工件对象或者基础对象的边界框限制 - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - 从物体表面的Z轴偏移 - - - - The Sample Interval. Small values cause long wait times - 示例间隔。小值导致等待时间长 - - - - Enable optimization which removes unnecessary points from G-Code output - 启用优化，从G-Code输出中移除不必要的点 - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. 较小的数值能够产生更精细、更精确的网格。较小的数值不会增加更多的处理时间。 - - - The completion mode for the operation: single or multi-pass - 操作完成模式：单次或多次 - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan 旋转扫描的停止分度(角度) - - - Ignore areas that proceed below specified depth. - 忽略指定深度以下的区域。 - - - - Depth used to identify waste areas to ignore. - 用于确定将被忽略的废物区域的深度。 - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied 要复制的路径 - - - The base geometry of this toolpath - 此工具路径的基础几何形状 - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. 要应用于操作的额外偏移量。方向与操作相关。 + + + The library to use to generate the path + 用于生成路径的库 + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object 此对象的材料 + + + Controls how tool moves around corners. Default=Round + 控制工具如何在拐角处移动。默认值 = 圆 + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ 如果使用刀具半径补偿, 则为 True - - The library to use to generate the path - 用于生成路径的库 + + The direction along which dropcutter lines are created + 沿落刀线创建的方向 - - Controls how tool moves around corners. Default=Round - 控制工具如何在拐角处移动。默认值 = 圆 + + Should the operation be limited by the stock object or by the bounding box of the base object + 操作被工件对象或者基础对象的边界框限制 + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + 从物体表面的Z轴偏移 + + + + The Sample Interval. Small values cause long wait times + 示例间隔。小值导致等待时间长 + + + + Enable optimization which removes unnecessary points from G-Code output + 启用优化，从G-Code输出中移除不必要的点 + + + + The completion mode for the operation: single or multi-pass + 操作完成模式：单次或多次 + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + 忽略指定深度以下的区域。 + + + + Depth used to identify waste areas to ignore. + 用于确定将被忽略的废物区域的深度。 + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + 此工具路径的基础几何形状 @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° 无效的切削角, 此角度必须小于90°且大于或等于 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. 功能%s.%s 不能作为圆形孔的处理方法-请从 "基本几何图形" 列表中删除。 + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + 考虑切换“逆变角”属性并重新计算。 + + + + Multiple faces in Base Geometry. + 基础几何体中的多个面。 + + + + Depth settings will be applied to all faces. + 深度设置将应用于所有面。 + + + + EnableRotation property is 'Off'. + 启用旋转属性为“关闭”。 + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - 考虑切换“逆变角”属性并重新计算。 - - - - Multiple faces in Base Geometry. - 基础几何体中的多个面。 - - - - Depth settings will be applied to all faces. - 深度设置将应用于所有面。 - - - - EnableRotation property is 'Off'. - 启用旋转属性为“关闭”。 - Ignoring non-horizontal Face @@ -1991,6 +1991,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + 口袋形状 + + + + Creates a Path Pocket object from a face or faces + 从一个或多个面创建一个路径口袋对象 + Normal @@ -2041,16 +2051,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - 口袋形状 - - - - Creates a Path Pocket object from a face or faces - 从一个或多个面创建一个路径口袋对象 - 3D Pocket @@ -2184,16 +2184,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile 面轮廓铣 - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3471,16 +3471,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - 修饰 - - - - Creates a Path Dess-up object from a selected path - 从所选路径创建路径修整对象 - Please select one path object @@ -3500,6 +3490,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object 请选择路径对象 + + + Dress-up + 修饰 + + + + Creates a Path Dess-up object from a selected path + 从所选路径创建路径修整对象 + Path_DressupAxisMap @@ -3972,6 +3972,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object 创建一个路径跃点对象 + + + The selected object is not a path + + 所选对象不是路径 + + Please select one path object @@ -3987,13 +3994,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop 创建跃点 - - - The selected object is not a path - - 所选对象不是路径 - - Path_Inspect @@ -4243,11 +4243,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - 作业没有选定的基对象。 - Check the path job for common errors @@ -4498,6 +4493,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + 作业没有选定的基对象。 + It appears the machine limits haven't been set. Not able to check path extents. @@ -4659,6 +4659,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + 要加载的工具编号 + Add Tool Controller to the Job @@ -4669,11 +4674,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller 添加工具控制器 - - - Tool Number to Load - 要加载的工具编号 - Path_ToolTable @@ -4700,6 +4700,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path 创建中间线雕刻路径 + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4710,11 +4715,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4749,11 +4749,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable json (*. json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (* tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (* tbl) + Open tooltable 打开 tooltable + + + Save tooltable + 保存 tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4964,11 +5009,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable xml (*. xml);;HeeksCAD tooltable (* tooltable) - - - Save tooltable - 保存 tooltable - Tooltable XML (*.xml) @@ -4984,46 +5024,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property 对象没有 tooltable 属性 - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable json (*. json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (* tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (* tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 61ea79af07..17f0b851de 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. 當模組處於除錯模式下創建物件時顯示暫時軌跡 - - - The direction along which dropcutter lines are created - The direction along which dropcutter lines are created - - - - Should the operation be limited by the stock object or by the bounding box of the base object - Should the operation be limited by the stock object or by the bounding box of the base object - - - - Step over percentage of the drop cutter path - Step over percentage of the drop cutter path - - - - Z-axis offset from the surface of the object - Z-axis offset from the surface of the object - - - - The Sample Interval. Small values cause long wait times - 樣本間隔。較小的數值導致長時間等待 - - - - Enable optimization which removes unnecessary points from G-Code output - Enable optimization which removes unnecessary points from G-Code output - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - The completion mode for the operation: single or multi-pass - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - Stop index(angle) for rotational scan Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - Ignore areas that proceed below specified depth. - - - - Depth used to identify waste areas to ignore. - Depth used to identify waste areas to ignore. - - - - Cut through waste to depth at model edge, releasing the model. - Cut through waste to depth at model edge, releasing the model. - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied 要複製之路徑 - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -568,6 +508,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + 用於生成函軌跡的函式庫 + Start pocketing at center or boundary @@ -668,6 +613,11 @@ A material for this object 這個對象的材料 + + + Controls how tool moves around corners. Default=Round + 控制工具將如何移動角。預設為圈 + Maximum distance before a miter join is truncated @@ -699,14 +649,64 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - 用於生成函軌跡的函式庫 + + The direction along which dropcutter lines are created + The direction along which dropcutter lines are created - - Controls how tool moves around corners. Default=Round - 控制工具將如何移動角。預設為圈 + + Should the operation be limited by the stock object or by the bounding box of the base object + Should the operation be limited by the stock object or by the bounding box of the base object + + + + Step over percentage of the drop cutter path + Step over percentage of the drop cutter path + + + + Z-axis offset from the surface of the object + Z-axis offset from the surface of the object + + + + The Sample Interval. Small values cause long wait times + 樣本間隔。較小的數值導致長時間等待 + + + + Enable optimization which removes unnecessary points from G-Code output + Enable optimization which removes unnecessary points from G-Code output + + + + The completion mode for the operation: single or multi-pass + The completion mode for the operation: single or multi-pass + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + Ignore areas that proceed below specified depth. + Ignore areas that proceed below specified depth. + + + + Depth used to identify waste areas to ignore. + Depth used to identify waste areas to ignore. + + + + Cut through waste to depth at model edge, releasing the model. + Cut through waste to depth at model edge, releasing the model. + + + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1121,6 +1121,31 @@ Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1218,31 +1243,6 @@ Increased to stock top. Selected feature(s) require 'Enable Rotation: B(y)' for access. Selected feature(s) require 'Enable Rotation: B(y)' for access. - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - Ignoring non-horizontal Face @@ -1993,6 +1993,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2043,16 +2053,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -2186,16 +2186,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile Face Profile - - - For open edges, verify Final Depth for this operation. - For open edges, verify Final Depth for this operation. - Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). + + + For open edges, verify Final Depth for this operation. + For open edges, verify Final Depth for this operation. + Profile based on face or faces @@ -3474,16 +3474,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3503,6 +3493,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3975,6 +3975,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3990,13 +3997,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4243,11 +4243,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - The Job has no selected Base object. - Check the path job for common errors @@ -4498,6 +4493,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date Date + + + The Job has no selected Base object. + The Job has no selected Base object. + It appears the machine limits haven't been set. Not able to check path extents. @@ -4658,6 +4658,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4668,11 +4673,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4699,6 +4699,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4709,11 +4714,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4748,11 +4748,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4963,11 +5008,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4983,46 +5023,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm index 5261193737..c9906ad58b 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts index 3b0c604f30..c9357d94de 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts @@ -472,7 +472,7 @@ Czy chcesz kontynuować? The path to the POV-Ray executable, if you want to render from %1 - Ścieżka do pliku wykonywalnego POV-Ray, jeśli chcesz wyrenderować %1 + Ścieżka do pliku wykonywalnego POV-Ray, jeśli chcesz renderować w %1 diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.ts index 48785cd148..ff578357fd 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ar.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create إنشاء diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_bg.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_bg.ts index 992f5e5e19..28573f0e0b 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_bg.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_bg.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Създаване diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts index dc8b7b6a7c..83b8f09a97 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ca.ts @@ -243,7 +243,7 @@ Reconstrucció amb Poisson - + Segmentation Segmentació @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Crea diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts index 1f04872378..f411eda69c 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_cs.ts @@ -243,7 +243,7 @@ Poissonova rekonstrukce - + Segmentation Segmentace @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Vytvořit diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts index 9dbbf736d5..352b564918 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts @@ -243,7 +243,7 @@ Poisson-Rekonstruktion - + Segmentation Segmentierung @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Erstellen diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.ts index 79c93e32a0..e7469ddc5a 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_el.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Δημιουργήστε diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-AR.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-AR.ts index bfe5dd218e..6066dbd055 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-AR.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-AR.ts @@ -243,7 +243,7 @@ Reconstrucción de Poisson - + Segmentation Segmentación @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Crear diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.ts index d1665f80a2..f13df74628 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_es-ES.ts @@ -243,7 +243,7 @@ Reconstrucción de Poisson - + Segmentation Segmentación @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Crear diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts index 97364e8f65..17f0e59493 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_eu.ts @@ -243,7 +243,7 @@ Poissonen berreraikitzea - + Segmentation Segmentazioa @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Sortu diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.ts index 31026c3e48..05593e085b 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fi.ts @@ -243,7 +243,7 @@ Poisson pinnan rekonstruointi - + Segmentation Segmentaatio @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Luo diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.ts index 3704dd6b4f..bb084f75ae 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fil.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Gumawa diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.ts index 05f67065b2..0216bb1024 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_fr.ts @@ -243,7 +243,7 @@ Reconstruction de Poisson - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Créer diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.ts index 9db98b3eb4..4a8a6dbf21 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_gl.ts @@ -243,7 +243,7 @@ Reconstrución de Poisson - + Segmentation Segmentación @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Facer diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.ts index 6cb67ff784..28f06538e5 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hr.ts @@ -243,7 +243,7 @@ Possion rekonstrukcija - + Segmentation Segmentacija @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Stvoriti diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.ts index 7df49f1f8a..834fe534ce 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_hu.ts @@ -243,7 +243,7 @@ Poisson felszín helyreállítás - + Segmentation Szegmentálás @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Létrehozás diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts index c42e3ac23e..236b0aae06 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_id.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Membuat diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.ts index ec47cf9455..6e7c6fc1f6 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_it.ts @@ -243,7 +243,7 @@ Ricostruzione di Poisson - + Segmentation Segmentazione @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Crea diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.ts index bfc9617d4b..e036e31add 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ja.ts @@ -243,7 +243,7 @@ ポアソンの再構築 - + Segmentation セグメンテーション @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create 作成 diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.ts index 4dd4762da0..37406afe66 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_lt.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Sukurti diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.ts index 1df13b6962..674840a257 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_nl.ts @@ -243,7 +243,7 @@ Poisson reconstructie - + Segmentation Segmentatie @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Aanmaken diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts index 429c21f77c..60493795be 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pl.ts @@ -243,7 +243,7 @@ Rekonstrukcja powierzchni Poissona - + Segmentation Segmentacja @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Utwórz diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts index 8105280c18..f7a3f4c576 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-BR.ts @@ -243,7 +243,7 @@ Reconstrução de superfície de Poisson - + Segmentation Segmentação @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Criar diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts index fd72e35c9d..b420a41c82 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts @@ -243,7 +243,7 @@ Reconstrução Poisson - + Segmentation Segmentação @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Criar diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts index 440e92a9ae..6f99b9468a 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ro.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Creează diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts index 9cb76ca8a6..e70915f69f 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_ru.ts @@ -243,7 +243,7 @@ Реконструирование поверхности Пуассона - + Segmentation Сегментация @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Создать diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts index 6cb58423ce..37c8376f9b 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts @@ -243,7 +243,7 @@ Ponovna zgraditev po Poissonu - + Segmentation Členitev @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Ustvari diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.ts index d8163eef39..dcb6fe4da8 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sv-SE.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentering @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Skapa diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts index 133a8f575f..b2b8a572e5 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_tr.ts @@ -243,7 +243,7 @@ Poisson yüzey yeniden oluşumu - + Segmentation Bölümlenme @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Oluştur diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.ts index e8621441c3..410a189cfa 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_uk.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Створити diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts index 50aa7d1e4a..6f2ae7e4a1 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_val-ES.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Crea diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.ts index 8c7f562847..f4b3238592 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_vi.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create Tạo diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.ts index 63f0f418de..10a25a486d 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-CN.ts @@ -243,7 +243,7 @@ 泊松曲面重构 - + Segmentation 段 @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create 创建 diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts index 1a04d9a82b..fb5f877eb1 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_zh-TW.ts @@ -243,7 +243,7 @@ Poisson reconstruction - + Segmentation Segmentation @@ -567,7 +567,7 @@ ReverseEngineeringGui::TaskSegmentationManual - + Create 建立 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm index 1eef059760..08d32a6b86 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts index 75d64d0e3d..09bc29167f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ar.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Swap constraint names - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. إن الإصدار الحالي لـ OCE/OCC لا يدعم عملية العقدة. يجب أن تتوفر على الإصدار 6.9.0 أو أعلى. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. لم تقم بطلب أي تغيير في تعددية العقدة. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. لا يمكن خفض التعددية إلى ما تحت الصفر. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -3894,12 +3896,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Swap constraint names - + Unnamed constraint Unnamed constraint - + Only the names of named constraints can be swapped. Only the names of named constraints can be swapped. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ However, no constraints linking to the endpoints were found. All All - - - Normal - Normal - Datums @@ -4924,34 +4916,192 @@ However, no constraints linking to the endpoints were found. Reference المرجع + + + Horizontal + أفقيا + + Vertical + رأسيا + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + موازى + + + + Perpendicular + Perpendicular + + + + Tangent + المماس + + + + Equality + Equality + + + + Symmetric + Symmetric + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + نصف القطر + + + + Weight + Weight + + + + Diameter + قطر الدائرة + + + + Angle + الزاوية + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + عرض + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + عرض الكل + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + القائمة + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error خطأ @@ -5310,136 +5460,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Invalid sketch - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. هذه الرسمة غير صالحة ولا يمكن التعديل عليها. - + Please remove the following constraint: المرجو حذف التقييد التالي: - + Please remove at least one of the following constraints: المرجو حذف واحد من التقييدات التالية على الأقل: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Empty sketch - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (إضغط من أجل الإختيار) - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.qm index ea3cb4b727..f7667d8192 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.ts index 4ade96906d..794420ca31 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_bg.ts @@ -361,7 +361,7 @@ Fillets - Fillets + Закръгление @@ -923,7 +923,7 @@ with respect to a line or a third point Create arc by three points - Create arc by three points + Създаване дъги по трем точкам @@ -959,7 +959,7 @@ with respect to a line or a third point Create arc by center - Create arc by center + Създаване дъги от централна точка @@ -1409,7 +1409,7 @@ with respect to a line or a third point Create text - Create text + Създаване надпис @@ -1730,12 +1730,12 @@ as mirroring reference. Create sketch - Create sketch + Създаване скица Create a new sketch. - Create a new sketch. + Създаване на нов скица. @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Swap constraint names - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -3894,12 +3896,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Swap constraint names - + Unnamed constraint Unnamed constraint - + Only the names of named constraints can be swapped. Only the names of named constraints can be swapped. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ However, no constraints linking to the endpoints were found. All All - - - Normal - Normal - Datums @@ -4924,34 +4916,192 @@ However, no constraints linking to the endpoints were found. Reference Референция + + + Horizontal + По хоризонталата + + Vertical + По вертикалата + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Паралел + + + + Perpendicular + Perpendicular + + + + Tangent + Тангента + + + + Equality + Equality + + + + Symmetric + Симетрично + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Радиус + + + + Weight + Тегло + + + + Diameter + Диаметър + + + + Angle + Ъгъл + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Изглед + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Показване на всичко + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Списък + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Грешка @@ -5310,136 +5460,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Invalid sketch - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Please remove the following constraint: - + Please remove at least one of the following constraints: Please remove at least one of the following constraints: - + Please remove the following redundant constraint: Please remove the following redundant constraint: - + Please remove the following redundant constraints: Please remove the following redundant constraints: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Empty sketch - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (click to select) - + Fully constrained sketch Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Solved in %1 sec - + Unsolved (%1 sec) Unsolved (%1 sec) @@ -5745,7 +5895,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rectangle - Create a rectangle + Създаване правоъгълник diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm index ad284f562c..989b6a3513 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index fba5e210a8..5df86e091a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -2658,7 +2658,9 @@ restriccions invàlides, geometries degenerades, etc. - + + + Update constraint's virtual space Actualitza l'espai virtual de la restricció @@ -2668,12 +2670,12 @@ restriccions invàlides, geometries degenerades, etc. Afegeix restriccions automàtiques - + Swap constraint names Intercanvia els noms de restricció - + Rename sketch constraint Reanomena restricció del croquis @@ -2741,42 +2743,42 @@ restriccions invàlides, geometries degenerades, etc. No es pot esbrinar la intersecció de corbes. Proveu d'afegir una restricció de coincidència entre els vèrtexs de les corbes que intenteu arrodonir. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Aquesta versió d' OCE/OCC no permet operacions de nus. Necessiteu 6.9.0 o posteriors. - + BSpline Geometry Index (GeoID) is out of bounds. l'index de geometria BSpline (GeoID) esta fora de les restriccions. - + You are requesting no change in knot multiplicity. Se us ha demanat que no canvieu la multiplicitat del nus. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'índex de geometria (GeoId) proporcionada no és una corba de B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'índex del nus és fora dels límits. Tingueu en compte que d'acord amb la notació d'OCC, el primer nus té l'índex 1 i no zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicitat no pot augmentar més enllà del grau de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicitat no es pot reduir més enllà de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC no pot reduir la multiplicitat dins de la tolerància màxima. @@ -3886,12 +3888,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Intercanvia els noms de restricció - + Unnamed constraint Restricció sense nom - + Only the names of named constraints can be swapped. Només es poden intercanviar els noms de les restriccions anomenades. @@ -4617,11 +4619,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4883,11 +4880,6 @@ However, no constraints linking to the endpoints were found. All Tot - - - Normal - Normal - Datums @@ -4903,34 +4895,192 @@ However, no constraints linking to the endpoints were found. Reference Ref + + + Horizontal + Horitzontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paral·lel + + + + Perpendicular + Perpendicular + + + + Tangent + Tangent + + + + Equality + Equality + + + + Symmetric + Simetría + + + + Block + Bloc + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radi + + + + Weight + Pes + + + + Diameter + Diàmetre + + + + Angle + Angle + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostra-ho tot + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Llista + + + Internal alignments will be hidden Les alineacions internes s'ocultaran - + Hide internal alignment Oculta l'alineació interna - + Extended information will be added to the list La informació ampliada s'afegirà a la llista - + + Geometric + Geometric + + + Extended information Informació ampliada - + Constraints Constraints - - + + + + + Error Error @@ -5289,136 +5439,136 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l SketcherGui::ViewProviderSketch - + Edit sketch Editar croquis - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch El croquis no és vàlid - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. El croquis no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + The following constraint is partially redundant: La restricció següent és parcialment redundant: - + The following constraints are partially redundant: Les següents restriccions són parcialment redundants: - + Please remove the following malformed constraint: Si us plau, elimineu la restricció defectuosa següent: - + Please remove the following malformed constraints: Si us plau, elimineu les restriccions defectuoses següents: - + Empty sketch Croquis buit - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (feu clic per a seleccionar) - + Fully constrained sketch Croquis completament restringit - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Croquis sub-restringit amb <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grau</span></a> de llibertat. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Croquis sub-restringit amb <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graus</span></a> de llibertat. %2 - + Solved in %1 sec Solucionat en %1 s - + Unsolved (%1 sec) Sense solucionar (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm index bdb22a1334..b102d351e1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index cef166650d..18d45138b6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -213,7 +213,7 @@ Constrain auto radius/diameter - Constrain auto radius/diameter + Vazba automatický rádius/průměr @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Vytvořit obdélníky Creates a rectangle in the sketch - Creates a rectangle in the sketch + Vytvoří obdélník v náčrtu @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Vystředěný obdélník Rounded rectangle - Rounded rectangle + Zaoblený obdélník @@ -629,7 +629,7 @@ Constrain vertical distance - Constrain vertical distance + Vazba svislé vzdálenosti @@ -775,12 +775,12 @@ na vybraném vrcholu Constrain auto radius/diameter - Constrain auto radius/diameter + Vazba automatický rádius/průměr Fix automatically diameter on circle and radius on arc/pole - Fix automatically diameter on circle and radius on arc/pole + Opravit automaticky průměr kružnice a poloměr oblouku/pólu @@ -1191,12 +1191,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Vytvořit zaoblený obdélník Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Vytvořit zaoblený obdélník v náčrtu @@ -1335,12 +1335,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Vytvořit vystředěný obdélník Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Vytvořit vystředěný obdélník v náčrtu @@ -1764,12 +1764,12 @@ jakožto reference. Remove axes alignment - Remove axes alignment + Odstranit osové zarovnání Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Upraví vazby tak, aby se odstranilo zarovnání podle osy, zatímco vazby ve výběru zůstaly zachované @@ -1984,12 +1984,12 @@ Tímto se vymaže vlastnost "Podpora", pokud existuje. Split edge - Split edge + Rozdělit hranu Splits an edge into two while preserving constraints - Splits an edge into two while preserving constraints + Rozdělí hranu na dvě se zachováním vazeb @@ -2334,7 +2334,7 @@ neplatných vazeb, degenerované geometrie atd. Swap PointOnObject+tangency with point to curve tangency - Swap PointOnObject+tangency with point to curve tangency + Bod na křivce + tečnost prohodit s tečností v bodě křivky @@ -2392,7 +2392,7 @@ neplatných vazeb, degenerované geometrie atd. Add radiam constraint - Add radiam constraint + Přidat vazbu poloměr-průměr @@ -2493,12 +2493,12 @@ neplatných vazeb, degenerované geometrie atd. Add centered sketch box - Add centered sketch box + Přidat vystředěný obdélník Add rounded rectangle - Add rounded rectangle + Přidat zaoblený obdélník @@ -2571,7 +2571,7 @@ neplatných vazeb, degenerované geometrie atd. Split edge - Split edge + Rozdělit hranu @@ -2651,7 +2651,7 @@ neplatných vazeb, degenerované geometrie atd. Remove Axes Alignment - Remove Axes Alignment + Odstranit osové zarovnání @@ -2660,7 +2660,9 @@ neplatných vazeb, degenerované geometrie atd. - + + + Update constraint's virtual space Aktualizovat virtuální prostor vazby @@ -2670,12 +2672,12 @@ neplatných vazeb, degenerované geometrie atd. Přidat automatické vazby - + Swap constraint names Prohodit názvy vazeb - + Rename sketch constraint Přejmenovat vazbu náčrtu @@ -2743,42 +2745,42 @@ neplatných vazeb, degenerované geometrie atd. Nelze odhadnout průsečík křivek. Zkuste přidat vazbu totožnosti mezi vrcholy křivek, které chcete zaoblit. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Tato verze OCE/OCC nepodporuje operaci uzel. Potřebujete 6.9.0 nebo vyšší. - + BSpline Geometry Index (GeoID) is out of bounds. Geometrický index (GeoID) B-splajnu je mimo meze. - + You are requesting no change in knot multiplicity. Nepožadujete změnu v násobnosti uzlů. - + The Geometry Index (GeoId) provided is not a B-spline curve. Daný geometrický index (GeoId) neodpovídá B-splajn křivce. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Index uzlu je mimo hranice. Všimněte si, že v souladu s OCC zápisem je index prvního uzlu 1 a ne 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Násobnost nemůže být zvýšena nad stupeň B-splajnu. - + The multiplicity cannot be decreased beyond zero. Násobnost nemůže být snížena pod nulu. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC není schopno snížit násobnost na maximální toleranci. @@ -3421,22 +3423,22 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Sketcher Constraint Substitution - Sketcher Constraint Substitution + Nahrazení vazeb náčrtu Keep notifying me of constraint substitutions - Keep notifying me of constraint substitutions + Informovat o nahrazování vazeb Endpoint to edge tangency was applied instead. - Endpoint to edge tangency was applied instead. + Namísto toho byla použita tečnost hrany v koncovém bodě. Endpoint to edge tangency was applied. The point on object constraint was deleted. - Endpoint to edge tangency was applied. The point on object constraint was deleted. + Byla použita tečnost hrany v koncovém bodě. Vazba bodu na objektu byla smazána. @@ -3783,7 +3785,7 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Odstranění osového zarovnání vyžaduje alespoň jeden vybraný geometrický element, který není vnější @@ -3892,12 +3894,12 @@ Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; Prohodit názvy vazeb - + Unnamed constraint Nepojmenovaná vazba - + Only the names of named constraints can be swapped. Pouze názvy pojmenovaných vazeb mohou být vyměněny. @@ -4323,12 +4325,12 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Working colors - Working colors + Pracovní barvy Coordinate text - Coordinate text + Text souřadnice @@ -4338,27 +4340,27 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Creating line - Creating line + Vytváření čáry Cursor crosshair - Cursor crosshair + Nitkový kurzor Geometric element colors - Geometric element colors + Barvy geometrických prvků Internal alignment edge - Internal alignment edge + Hrana vnitřního zarovnání Unconstrained - Unconstrained + Bez vazby @@ -4400,12 +4402,12 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Deactivated constraint - Deactivated constraint + Deaktivovaná vazba Colors outside Sketcher - Colors outside Sketcher + Barvy mimo náčrt @@ -4420,7 +4422,7 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Constrained - Constrained + Omezeno @@ -4430,7 +4432,7 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Fully constrained Sketch - Fully constrained Sketch + Plně určený náčrt @@ -4465,12 +4467,12 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Constraint colors - Constraint colors + Barvy vazeb Constraint symbols - Constraint symbols + Symboly vazeb @@ -4485,7 +4487,7 @@ Vyžaduje znovu otevření editace náčrtu, aby se aktivovalo. Expression dependent constraint - Expression dependent constraint + Vazby závislé na výrazu @@ -4562,22 +4564,22 @@ Podporuje všechny jednotkové systémy kromě "US tradiční" a "stavební US/E Font size used for labels and constraints. - Font size used for labels and constraints. + Velikost písma použitá pro popisky a vazby. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + 3D pohled je zobrazen v tomto měřítku. Line pattern used for grid lines. - Line pattern used for grid lines. + Vzor pro čáry použité v mřížce. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Počet polygonů použitých pro aproximaci geometrie. @@ -4627,11 +4629,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4899,11 +4896,6 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. All Vše - - - Normal - Normála - Datums @@ -4919,34 +4911,192 @@ Nebyly nalezeny vazby připojené k těmto koncovým bodům. Reference Odkaz + + + Horizontal + Vodorovně + + Vertical + Svisle + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Rovnoběžně + + + + Perpendicular + Kolmý + + + + Tangent + Tečna + + + + Equality + Equality + + + + Symmetric + Symetrické + + + + Block + Blok + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Poloměr + + + + Weight + Tloušťka + + + + Diameter + Průměr + + + + Angle + Úhel + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Pohled + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Zobrazit vše + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Seznam + + + Internal alignments will be hidden Interní zarovnání budou skryta - + Hide internal alignment Skrýt vnitřní zarovnání - + Extended information will be added to the list Rozšířené informace budou přidány do seznamu - + + Geometric + Geometric + + + Extended information Rozšířené informace - + Constraints Constraints - - + + + + + Error Chyba @@ -5305,136 +5455,136 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc SketcherGui::ViewProviderSketch - + Edit sketch Upravit skicu - + A dialog is already open in the task panel Dialog je opravdu otevřen v panelu úloh - + Do you want to close this dialog? Chcete zavřít tento dialog? - + Invalid sketch Neplatný náčrt - + Do you want to open the sketch validation tool? Chcete otevřít nástroje pro ověření náčrtu? - + The sketch is invalid and cannot be edited. Náčrt není platný a nemůže být upravován. - + Please remove the following constraint: Odstraňte, prosím, následující vazbu: - + Please remove at least one of the following constraints: Odstraňte, prosím, alespoň jednu z následujících vazeb: - + Please remove the following redundant constraint: Odstraňte, prosím, následující nadbytečnou vazbu: - + Please remove the following redundant constraints: Odstraňte, prosím, následující nadbytečné vazby: - + The following constraint is partially redundant: Toto omezení je částečně nadbytečné: - + The following constraints are partially redundant: Tato omezení jsou částečně nadbytečná: - + Please remove the following malformed constraint: Odstraňte prosím tuto poškozenou vazbu: - + Please remove the following malformed constraints: Odstraňte prosím tyto poškozené vazby: - + Empty sketch Prázdný náčrt - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (klikněte pro vybrání) - + Fully constrained sketch Plně určený náčrt - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Nedovazbený náčrt s <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stupněm</span></a> volnosti. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Nedovazbený náčrt s <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 stupni</span></a> volnosti. %2 - + Solved in %1 sec Vyřešeno behem %1 s - + Unsolved (%1 sec) Nevyřešeno (%1 s) @@ -5740,7 +5890,7 @@ Body musejí být blíž než pětina velikosti mřížky, aby došlo k přichyc Create a rectangle - Create a rectangle + Vytvořit obdélník diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index ab1bbefc78..989576102b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 5962ca2b6a..8425ed15fc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -2658,7 +2658,9 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. - + + + Update constraint's virtual space Virtuellen Raum der Einschränkungen aktualisieren @@ -2668,12 +2670,12 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Automatische Einschränkungen hinzufügen - + Swap constraint names Namen der Beschränkungen tauschen - + Rename sketch constraint Skizzeneinschränkung umbenennen @@ -2741,42 +2743,42 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen.Schnittpunkt von Kurven konnte nicht gefunden werden. Versuchen Sie eine Koinzidenz Beschränkung zwischen den Scheitelpunkten der Kurven hinzuzufügen, die Sie verrunden möchten. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Diese Version von OCE/OCC unterstützt keine Knoten-Operationen. Sie benötigen 6.9.0 oder höher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometrie Index (GeoID) ist außerhalb des gültigen Bereichs. - + You are requesting no change in knot multiplicity. Sie fordern keine Änderung in der Multiplizität der Knoten. - + The Geometry Index (GeoId) provided is not a B-spline curve. Der bereitgestellte Geometrieindex (GeoId) ist keine B-Spline-Kurve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Der Knotenindex ist außerhalb der Grenzen. Beachten Sie, dass der erste Knoten gemäß der OCC-Notation den Index 1 und nicht Null hat. - + The multiplicity cannot be increased beyond the degree of the B-spline. Die Vielfachheit kann nicht über den Grad des B-Splines hinaus erhöht werden. - + The multiplicity cannot be decreased beyond zero. Die Vielfachheit kann nicht über Null hinaus verringert werden. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC kann die Multiplizität innerhalb der maximalen Toleranz nicht verringern. @@ -3890,12 +3892,12 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Namen der Beschränkungen tauschen - + Unnamed constraint Unbenannte Beschränkung - + Only the names of named constraints can be swapped. Nur die Namen von benannten Beschränkungen können vertauscht werden. @@ -4559,7 +4561,7 @@ Unterstützt alle Einheitensysteme außer 'US customary' und 'Gebäude US/Euro'. Font size used for labels and constraints. - Font size used for labels and constraints. + Schriftgröße für Bezeichnungen und Beschränkungen. @@ -4624,11 +4626,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4637,7 +4634,7 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Beim Öffnen einer Skizze alle davon abhängigen Objekte ausblenden. @@ -4672,7 +4669,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Beim Schließen einer Skizze die Kamera an die Stelle zurückbewegen, an der sie war, bevor die Skizze geöffnet wurde. @@ -4683,8 +4680,7 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Eine Skizze standardmäßig im Schnittansichtsmodus öffnen. Dann sind nur Objekte hinter der Skizzenebene sichtbar. @@ -4896,11 +4892,6 @@ Es wurden keine Beschränkungen zu diesen Punkten gefunden. All Alles - - - Normal - Normal - Datums @@ -4916,34 +4907,192 @@ Es wurden keine Beschränkungen zu diesen Punkten gefunden. Reference Referenz + + + Horizontal + Horizontale + + Vertical + Vertikale + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Parallel + + + + Perpendicular + Senkrecht + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Symmetrisch + + + + Block + Block + + + + Distance + Abstand + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radius + + + + Weight + Stärke + + + + Diameter + Durchmesser + + + + Angle + Winkel + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Ansicht + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Alle anzeigen + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Liste + + + Internal alignments will be hidden Interne Ausrichtungen werden ausgeblendet - + Hide internal alignment Interne Ausrichtung ausblenden - + Extended information will be added to the list Erweiterte Informationen werden der Liste hinzugefügt - + + Geometric + Geometric + + + Extended information Erweiterte Informationen - + Constraints Einschränkungen - - + + + + + Error Fehlermeldungen @@ -5302,136 +5451,136 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges SketcherGui::ViewProviderSketch - + Edit sketch Skizze bearbeiten - + A dialog is already open in the task panel Ein Dialog im Arbeitspanel ist bereits geöffnet - + Do you want to close this dialog? Möchten Sie dieses Dialogfeld schließen? - + Invalid sketch Ungültige Skizze - + Do you want to open the sketch validation tool? Möchten Sie das Werkzeug zum Überprüfen der Skizze öffnen? - + The sketch is invalid and cannot be edited. Die Skizze ist ungültig und kann nicht bearbeitet werden. - + Please remove the following constraint: Bitte folgende Beschränkung entfernen: - + Please remove at least one of the following constraints: Bitte mindestens eine der folgenden Beschränkungen entfernen: - + Please remove the following redundant constraint: Bitte folgende redundante Beschränkung entfernen: - + Please remove the following redundant constraints: Bitte folgende, redundante Beschränkungen entfernen: - + The following constraint is partially redundant: Die folgende Einschränkung ist teilweise redundant: - + The following constraints are partially redundant: Die folgende Einschränkungen sind teilweise überflüssig: - + Please remove the following malformed constraint: Bitte folgende fehlerhafte Beschränkung entfernen: - + Please remove the following malformed constraints: Bitte folgende fehlerhafte Beschränkung entfernen: - + Empty sketch Leere Skizze - + Over-constrained sketch Überbestimmte Skizze - + Sketch contains malformed constraints Skizze enthält fehlerhafte Beschränkungen - + Sketch contains conflicting constraints Skizze enthält widersprüchliche Beschränkungen - + Sketch contains redundant constraints Skizze enthält redundante Beschränkungen - + Sketch contains partially redundant constraints Skizze enthält teilweise redundante Beschränkungen - - - - + + + + (click to select) (anklicken zum Auswählen) - + Fully constrained sketch Vollständig bestimmte Skizze - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Unterbestimmte Skizze mit <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 Freiheitsgrad</span></a>. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Unterbestimmte Skizze mit <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 Freiheitsgraden</span></a>. %2 - + Solved in %1 sec Berechnet in %1 s - + Unsolved (%1 sec) Keine Lösung (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm index d579b3cc92..c800be3d5c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts index 30ee2201d7..675972e772 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_el.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Ανταλλαγή ονομάτων περιορισμών - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Αυτή η έκδοση του OCE/OCC δεν υποστηρίζει την λειτουργία κόμβων. Θα χρειαστείτε την έκδοση 6.9.0 ή κάποια μεταγενέστερη. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Δεν απαιτείτε καμία αλλαγή της πολλαπλότητας κόμβου. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Ο δείκτης κόμβου είναι εκτός ορίων. Σημειώστε πως σύμφωνα με το σύστημα σημειογραφίας του OCC, ο πρώτος κόμβος έχει δείκτη 1 και όχι μηδέν. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Η πολλαπλότητα δεν δύναται να είναι χαμηλότερη από το μηδέν. - + OCC is unable to decrease the multiplicity within the maximum tolerance. To ΟCC αδυνατεί να μειώσει την πολλαπλότητα εντός των ορίων μέγιστης ανοχής. @@ -3894,12 +3896,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ανταλλαγή ονομάτων περιορισμών - + Unnamed constraint Ανώνυμος περιορισμός - + Only the names of named constraints can be swapped. Μόνο τα ονόματα των ονομασμένων περιορισμών μπορούν να ανταλλαχθούν. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4902,11 +4899,6 @@ However, no constraints linking to the endpoints were found. All Όλα - - - Normal - Κανονικό - Datums @@ -4922,34 +4914,192 @@ However, no constraints linking to the endpoints were found. Reference Αναφορά + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Παράλληλο + + + + Perpendicular + Perpendicular + + + + Tangent + Εφαπτόμενη + + + + Equality + Equality + + + + Symmetric + Συμμετρική + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Ακτίνα + + + + Weight + Weight + + + + Diameter + Διάμετρος + + + + Angle + Γωνία + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Προβολή + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Εμφάνιση Όλων + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Λίστα + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Σφάλμα @@ -5308,136 +5458,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Επεξεργασία σκίτσου - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Μη έγκυρο σκαρίφημα - + Do you want to open the sketch validation tool? Θέλετε να ανοίξετε το εργαλείο επικύρωσης σκαριφημάτων; - + The sketch is invalid and cannot be edited. Το σκαρίφημα είναι μη έγκυρο και δεν δύναται να υποστεί επεξεργασία. - + Please remove the following constraint: Παρακαλώ αφαιρέστε τον παρακάτω περιορισμό: - + Please remove at least one of the following constraints: Παρακαλώ αφαιρέστε τουλάχιστον έναν από τους παρακάτω περιορισμούς: - + Please remove the following redundant constraint: Παρακαλώ αφαιρέστε τον παρακάτω πλεονάζων περιορισμό: - + Please remove the following redundant constraints: Παρακαλώ αφαιρέστε τους παρακάτω πλεονάζοντες περιορισμούς: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Κενό σκαρίφημα - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (κάντε κλικ για να επιλέξετε) - + Fully constrained sketch Πλήρως περιορισμένο σκαρίφημα - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Επιλύθηκε σε %1 δευτερόλεπτα - + Unsolved (%1 sec) Δεν επιλύθηκε (%1 δευτερόλεπτα) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm index 598b653ed4..1e2230bd35 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts index c4c4324c95..997f768a18 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-AR.ts @@ -2660,7 +2660,9 @@ restricciones inválidas, geometrías degeneradas, etc. - + + + Update constraint's virtual space Actualizar el espacio virtual de la restricción @@ -2670,12 +2672,12 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricciones automáticas - + Swap constraint names Cambiar nombres de restricciones - + Rename sketch constraint Renombrar restricción de croquis @@ -2743,42 +2745,42 @@ restricciones inválidas, geometrías degeneradas, etc. No se puede adivinar la intersección de las curvas. Intente agregar una restricción coincidente entre los vértices de las curvas que pretende redondear. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versión de OCE/OCC no permite operación de nudo. Necesita 6.9.0 o superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de Geometría BSpline (GeoID) está fuera de límites. - + You are requesting no change in knot multiplicity. No está solicitando ningún cambio en la multiplicidad de nudos. - + The Geometry Index (GeoId) provided is not a B-spline curve. El índice de geometría (GeoId) proporcionado no es una curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. El índice de nudos está fuera de los límites. Tenga en cuenta que de acuerdo con la notación OCC, el primer nudo tiene índice 1 y no 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicidad no puede incrementarse más allá del grado de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicidad no puede ser disminuida más allá de cero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC es incapaz de disminuir la multiplicidad dentro de la tolerancia máxima. @@ -3892,12 +3894,12 @@ Combinaciones aceptadas: dos curvas; un punto final y una curva; dos puntos fina Cambiar nombres de restricciones - + Unnamed constraint Restricción sin nombre - + Only the names of named constraints can be swapped. Sólo los nombres de las restricciones nombradas pueden ser cambiados. @@ -4563,52 +4565,52 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Font size used for labels and constraints. - Font size used for labels and constraints. + Tamaño de la fuente usada por rótulos y restricciones. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + La vista 3D se escalará a este factor. Line pattern used for grid lines. - Line pattern used for grid lines. + Lineas patrón usadas por la retícula. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Número de polígonos para la aproximación de la geometría. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Aparecerá una ventana de diálogo para introducir un valor para las nuevas restricciones de cota. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + La herramienta actual de creación de croquis permanecerá activa después de la creación. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + La herramienta actual de creación de controles permanecerá activa después de la creación. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Si está marcado, muestra el nombre de las restricciones de cota (si existe). Show dimensional constraint name with format - Show dimensional constraint name with format + Mostrar nombre de restricción de cota con formato %N = %V - %N = %V + %N = %V @@ -4617,21 +4619,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + El formato de presentación de la cadena de control de acotamiento. +Por defecto en: %N = %V -%N - name parameter -%V - dimension value +%N - parámetro del nombre +%V - valor de la cota DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + FormatoCadenaCota @@ -4641,22 +4638,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Al abrir un croquis, oculta todas las características que dependen de el. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Al abrir un croquis, muestra fuentes para enlaces de geometría externos. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Al abrir un croquis, muestra los objetos adjuntos del croquis. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Aplica la configuración actual de automatización de visibilidad a todos los croquis en los documentos abiertos. @@ -4676,7 +4673,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Al cerrar un croquis, mueve la cámara a donde estaba antes de que el croquis fuera abierto. @@ -4687,8 +4684,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Abre un croquis en el modo Vista de Sección por defecto. +Entonces los objetos sólo son visibles detrás del plano del croquis. @@ -4900,11 +4897,6 @@ Sin embargo, no se encontraron restricciones que vinculen a los puntos finales.< All Todos - - - Normal - Normal - Datums @@ -4920,34 +4912,192 @@ Sin embargo, no se encontraron restricciones que vinculen a los puntos finales.< Reference Referencia + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincidente + + + + Point on Object + Point on Object + + + + Parallel + Paralelo + + + + Perpendicular + Perpendicular + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Simétrico + + + + Block + Bloque + + + + Distance + Distancia + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radio + + + + Weight + Peso + + + + Diameter + Diámetro + + + + Angle + Ángulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Ver + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostrar Todo + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Las alineaciones internas se ocultarán - + Hide internal alignment Ocultar alineación interna - + Extended information will be added to the list La información extendida se añadirá a la lista - + + Geometric + Geometric + + + Extended information Información extendida - + Constraints Restricciones - - + + + + + Error Error @@ -5306,136 +5456,136 @@ Los puntos deben establecerse más cerca de una quinta parte del tamaño de la c SketcherGui::ViewProviderSketch - + Edit sketch Editar boceto - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + Do you want to close this dialog? ¿Desea cerrar este diálogo? - + Invalid sketch Croquis no válido - + Do you want to open the sketch validation tool? ¿Quieres abrir la herramienta de validación de croquis? - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + Please remove the following constraint: Por favor, elimine la siguiente restricción: - + Please remove at least one of the following constraints: Por favor, elimine al menos una de las siguientes restricciones: - + Please remove the following redundant constraint: Por favor, elimine la siguiente restricción redundante: - + Please remove the following redundant constraints: Elimine las siguientes restricciones redundantes: - + The following constraint is partially redundant: La siguiente restricción es parcialmente redundante: - + The following constraints are partially redundant: Las siguientes restricciones son parcialmente redundantes: - + Please remove the following malformed constraint: Por favor, elimine la siguiente restricción mal formada: - + Please remove the following malformed constraints: Por favor, elimine las siguientes restricciones mal formadas: - + Empty sketch Croquis vacío - + Over-constrained sketch Croquis sobre-restringido - + Sketch contains malformed constraints El croquis contiene restricciones mal formadas - + Sketch contains conflicting constraints Croquis contiene restricciones conflictivas - + Sketch contains redundant constraints Croquis contiene restricciones redundantes - + Sketch contains partially redundant constraints El croquis contiene restricciones parcialmente redundantes - - - - + + + + (click to select) (clic para seleccionar) - + Fully constrained sketch Croquis totalmente restringido - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Croquis bajo-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 grados</span></a> de libertad - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Croquis sub-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 grados</span></a> de libertad. %2 - + Solved in %1 sec Resuelto en %1 seg - + Unsolved (%1 sec) Sin resolver (%1 seg) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index 9473156cb1..1a7871ccbf 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index 8ba3543fea..12c2009186 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -2660,7 +2660,9 @@ restricciones inválidas, geometrías degeneradas, etc. - + + + Update constraint's virtual space Actualizar el espacio virtual de la restricción @@ -2670,12 +2672,12 @@ restricciones inválidas, geometrías degeneradas, etc. Añadir restricciones automáticas - + Swap constraint names Intercambiar los nombres de restricción - + Rename sketch constraint Renombrar restricción de croquis @@ -2743,42 +2745,42 @@ restricciones inválidas, geometrías degeneradas, etc. No se puede adivinar la intersección de curvas. Intente agregar una restricción coincidente entre los vértices de las curvas que pretende redondear. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versión de OCE/OCC no permite operación de nudo. Necesita 6.9.0 o superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometría BSpline (GeoID) está fuera de restricciones. - + You are requesting no change in knot multiplicity. Usted esta solicitando no cambio en multiplicidad de nudo. - + The Geometry Index (GeoId) provided is not a B-spline curve. El índice de geometría (GeoID) proporcionado no es una curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. El índice de nudo es fuera de los limites. Note que según en concordancia con notación de la OCC, el primer nudo tiene índice 1 y no 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicidad no puede incrementarse más allá del grado de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicidad no puede ser disminuida más allá de cero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC es incapaz de disminuir la multiplicidad dentro de la tolerancia máxima. @@ -3891,12 +3893,12 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Intercambiar los nombres de restricción - + Unnamed constraint Restricción sin nombre - + Only the names of named constraints can be swapped. Sólo los nombres de las restricciones nombradas pueden ser cambiados. @@ -4561,52 +4563,52 @@ Soporta todos los sistemas de unidades excepto 'USA' y 'Building US/Euro'. Font size used for labels and constraints. - Font size used for labels and constraints. + Tamaño de la fuente usada por rótulos y restricciones. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + La vista 3D se escalará a este factor. Line pattern used for grid lines. - Line pattern used for grid lines. + Lineas patrón usadas por la retícula. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Número de polígonos para la aproximación de la geometría. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Aparecerá una ventana de diálogo para introducir un valor para las nuevas restricciones de cota. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + La herramienta actual de creación de croquis permanecerá activa después de la creación. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + La herramienta actual de creación de controles permanecerá activa después de la creación. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Si está marcado, muestra el nombre de las restricciones de cota (si existe). Show dimensional constraint name with format - Show dimensional constraint name with format + Mostrar nombre de restricción de cota con formato %N = %V - %N = %V + %N = %V @@ -4615,21 +4617,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + El formato de presentación de la cadena de control de acotamiento. +Por defecto en: %N = %V -%N - name parameter -%V - dimension value +%N - parámetro del nombre +%V - valor de la cota DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + FormatoCadenaCota @@ -4639,22 +4636,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Al abrir un croquis, oculta todas las características que dependen de el. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Al abrir un croquis, muestra fuentes para enlaces de geometría externos. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Al abrir un croquis, muestra los objetos adjuntos del croquis. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Aplica la configuración actual de automatización de visibilidad a todos los croquis en los documentos abiertos. @@ -4674,7 +4671,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Al cerrar un croquis, mueve la cámara a donde estaba antes de que el croquis fuera abierto. @@ -4685,8 +4682,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Abre un croquis en el modo Vista de Sección por defecto. +Entonces los objetos sólo son visibles detrás del plano del croquis. @@ -4898,11 +4895,6 @@ Sin embargo, no se encontraron restricciones a los extremos. All Todo - - - Normal - Normal - Datums @@ -4918,34 +4910,192 @@ Sin embargo, no se encontraron restricciones a los extremos. Reference Referencia + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincidente + + + + Point on Object + Point on Object + + + + Parallel + Paralelo + + + + Perpendicular + Perpendicular + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Simétrico + + + + Block + Bloque + + + + Distance + Distancia + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radio + + + + Weight + Peso + + + + Diameter + Diámetro + + + + Angle + Ángulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostrar Todos + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Las alineaciones internas se ocultarán - + Hide internal alignment Ocultar alineación interna - + Extended information will be added to the list La información extendida se añadirá a la lista - + + Geometric + Geometric + + + Extended information Información extendida - + Constraints Restricciones - - + + + + + Error Error @@ -5304,136 +5454,136 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc SketcherGui::ViewProviderSketch - + Edit sketch Editar boceto - + A dialog is already open in the task panel Un diálogo ya está abierto en el panel de tareas - + Do you want to close this dialog? ¿Desea cerrar este diálogo? - + Invalid sketch Croquis no válido - + Do you want to open the sketch validation tool? ¿Desea abrir la herramienta de validación del croquis? - + The sketch is invalid and cannot be edited. El croquis no es válido y no puede editarse. - + Please remove the following constraint: Elimine la siguiente restricción: - + Please remove at least one of the following constraints: Por favor elimine al menos una de las siguientes restricciones: - + Please remove the following redundant constraint: Por favor elimine la siguiente restricción redundante: - + Please remove the following redundant constraints: Por favor elimine las siguientes restricciones redundante: - + The following constraint is partially redundant: La siguiente restricción es parcialmente redundante: - + The following constraints are partially redundant: Las siguientes restricciones son parcialmente redundantes: - + Please remove the following malformed constraint: Por favor, elimine la siguiente restricción mal formada: - + Please remove the following malformed constraints: Por favor, elimine las siguientes restricciones mal formadas: - + Empty sketch Croquis vacío - + Over-constrained sketch Croquis sobre-restringido - + Sketch contains malformed constraints El croquis contiene restricciones mal formadas - + Sketch contains conflicting constraints Croquis contiene restricciones conflictivas - + Sketch contains redundant constraints Croquis contiene restricciones redundantes - + Sketch contains partially redundant constraints El croquis contiene restricciones parcialmente redundantes - - - - + + + + (click to select) (Clic para seleccionar) - + Fully constrained sketch Croquis completamente restringido - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Croquis bajo-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 grados</span></a> de libertad - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Croquis sub-restringido con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 grados</span></a> de libertad. %2 - + Solved in %1 sec Resuelto en %1 seg - + Unsolved (%1 sec) Sin resolver (%1 seg) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm index 6c8fbc34a4..78d6909603 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts index b5e61958e9..8b5c6bc8cc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_eu.ts @@ -2662,7 +2662,9 @@ murrizketak, geometria degeneratuak, etab. aztertuta. - + + + Update constraint's virtual space Eguneratu murrizketen espazio birtuala @@ -2672,12 +2674,12 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Gehitu murrizketa automatikoak - + Swap constraint names Trukatu murrizketen izenak - + Rename sketch constraint Aldatu krokis-murrizketaren izena @@ -2745,42 +2747,42 @@ murrizketak, geometria degeneratuak, etab. aztertuta. Ezin izan da kurben ebakidura antzeman. Saiatu bat datorren murrizketa bat gehitzen biribildu nahi dituzun kurben erpinen artean. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. OCE/OCC bertsio honek ez du onartzen adabegien gaineko eragiketarik. 6.9.0 bertsioa edo berriagoa behar duzu. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline geometria-indizea (GeoID) mugetatik kanpo dago. - + You are requesting no change in knot multiplicity. Adabegi-aniztasunean aldaketarik ez egitea eskatzen ari zara. - + The Geometry Index (GeoId) provided is not a B-spline curve. Hornitutako geometria-indizea (GeoId) ez da Bspline kurba bat. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Adabegi-indizea mugetatik kanpo dago. Kontuan izan, OCC notazioaren arabera, lehen adabegiaren indize-zenbakiak 1 izan behar duela, ez 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Aniztasuna ezin da handitu Bspline-aren gradutik gora. - + The multiplicity cannot be decreased beyond zero. Aniztasuna ezin da txikitu zerotik behera. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC-k ezin du aniztasuna txikitu tolerantzia maximoaren barruan. @@ -3894,12 +3896,12 @@ Onartutako konbinazioak: bi kurba; amaiera-puntu bat eta kurba bat; bi amaiera-p Trukatu murrizketen izenak - + Unnamed constraint Izenik gabeko murrizketa - + Only the names of named constraints can be swapped. Izendun murrizketen izenak soilik truka daitezke. @@ -4567,37 +4569,37 @@ Unitate-sistema guztiak onartzen ditu, 'US customary' eta 'Building US/Euro' sal Font size used for labels and constraints. - Font size used for labels and constraints. + Etiketetan eta murrizketetan erabilitako letra-tamaina. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + 3D bista faktore honetan oinarrituta eskalatzen da. Line pattern used for grid lines. - Line pattern used for grid lines. + Sareta-lerroetarako erabilitako lerro-eredua. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Geometria-hurbilketarako erabilitako poligono kopurua. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Elkarrizketa-koadro bat agertuko da kota-murrizketa berrien balioa sartzeko. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + Uneko krokisgile-tresnak aktibo jarraituko du sorreraren ondoren. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + Uneko murrizketa-tresnak aktibo jarraituko du sorreraren ondoren. @@ -4612,7 +4614,7 @@ Unitate-sistema guztiak onartzen ditu, 'US customary' eta 'Building US/Euro' sal %N = %V - %N = %V + %N = %V @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4645,22 +4642,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Krokis bat irekitzean, ezkutatu haren mendekoak diren elementu guztiak. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Krokisa irekitzean, erakutsi kanpo-geometriako esteken iturburuak. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Krokis bat irekitzean, erakutsi hura zein objektuei erantsita dagoen. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Ikusgaitasuna automatizatzeko ezarpenak dokumentu irekietako krokis guztiei aplikatzen dizkie. @@ -4680,7 +4677,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Krokisa ixtean, mugitu kamera krokisa ireki baino lehen zegoen tokira. @@ -4904,11 +4901,6 @@ Hala ere, ez da aurkitu amaiera-puntuei estekatutako murrizketarik.All Dena - - - Normal - Normala - Datums @@ -4924,34 +4916,192 @@ Hala ere, ez da aurkitu amaiera-puntuei estekatutako murrizketarik.Reference Erreferentzia + + + Horizontal + Horizontala + + Vertical + Bertikala + + + + Coincident + Bat datorrena + + + + Point on Object + Point on Object + + + + Parallel + Paraleloa + + + + Perpendicular + Perpendikularra + + + + Tangent + Tangentea + + + + Equality + Equality + + + + Symmetric + Simetrikoa + + + + Block + Blokea + + + + Distance + Distantzia + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Erradioa + + + + Weight + Pisua + + + + Diameter + Diametroa + + + + Angle + Angelua + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Bista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Erakutsi dena + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Zerrenda + + + Internal alignments will be hidden Barneko lerrokatzeak ezkutatu egingo dira - + Hide internal alignment Ezkutatu barne-lerrokatzea - + Extended information will be added to the list Informazio gehigarri gehituko zaio zerrendari - + + Geometric + Geometric + + + Extended information Informazio gehiago - + Constraints Murrizketak - - + + + + + Error Errorea @@ -5310,136 +5460,136 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar SketcherGui::ViewProviderSketch - + Edit sketch Editatu krokisa - + A dialog is already open in the task panel Elkarrizketa-koadro bat irekita dago ataza-panelean - + Do you want to close this dialog? Elkarrizketa-koadro hau itxi nahi duzu? - + Invalid sketch Baliogabeko krokisa - + Do you want to open the sketch validation tool? Krokisak balidatzeko tresna ireki nahi al duzu? - + The sketch is invalid and cannot be edited. Krokisa baliogabea da eta ezin da editatu. - + Please remove the following constraint: Kendu honako murrizketa: - + Please remove at least one of the following constraints: Kendu gutxienez honako murrizketetako bat: - + Please remove the following redundant constraint: Kendu erredundantea den honako murrizketa: - + Please remove the following redundant constraints: Kendu erredundanteak diren honako murriketak: - + The following constraint is partially redundant: Honako murrizketa partzialki erredundantea da: - + The following constraints are partially redundant: Honako murrizketak partzialki erredundanteak dira: - + Please remove the following malformed constraint: Kendu gaizki eratuta dagoen honako murrizketa: - + Please remove the following malformed constraints: Kendu gaizki eratuta dauden honako murrizketak: - + Empty sketch Krokis hutsa - + Over-constrained sketch Gehiegi murriztutako krokisa - + Sketch contains malformed constraints - Sketch contains malformed constraints + Krokisak gaizki eratutako murrizketak ditu - + Sketch contains conflicting constraints - Sketch contains conflicting constraints - - - - Sketch contains redundant constraints - Sketch contains redundant constraints + Krokisak gatazkan dauden murrizketak ditu - Sketch contains partially redundant constraints - Sketch contains partially redundant constraints + Sketch contains redundant constraints + Krokisak murrizketa erredundanteak ditu - - - - + + Sketch contains partially redundant constraints + Krokisak partzialki erredundanteak diren murrizketak ditu + + + + + + (click to select) (klik hautatzeko) - + Fully constrained sketch Osorik murriztutako krokisa - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Erabat mugatu gabeko krokisa <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 graduko</span></a> askatasunarekin. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Erabat mugatu gabeko krokisa <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graduko</span></a> askatasunarekin. %2 - + Solved in %1 sec %1 segundotan ebatzi da - + Unsolved (%1 sec) Ebatzi gabea (%1 seg) @@ -5548,7 +5698,7 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Finkatu zirkulu baten edo arku baten erradioa/diametroa @@ -5565,7 +5715,7 @@ Puntuak lerro batetik sareta-tamainaren bosten bat baino hurbilago ezarri behar Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Finkatu zirkulu baten edo arku baten erradioa/diametroa diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm index e95ae65fcd..6542a34b64 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 3d35aec06d..3f4772665c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -2662,7 +2662,9 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. - + + + Update constraint's virtual space Päivitä rajoituksen virtuaalinen tila @@ -2672,12 +2674,12 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Lisää automaattisesti rajoitteita - + Swap constraint names Vaihda keskenään rajoitteiden nimiä - + Rename sketch constraint Nimeä rajoite uudelleen @@ -2745,42 +2747,42 @@ virheellisiä rajoitteita, rappeutunutta geometriaa jne. Ei kyetty arvaamaan reunojen risteämispistettä. Kokeile lisätä yhtenevyysrajoite pyöristettävien reunojen kärkipisteiden välille. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Tämä OCE/OCC-versio ei tue solmutoimintoa. Tarvitset version 6.9.0 tai uudemman. - + BSpline Geometry Index (GeoID) is out of bounds. B-splinin geometria-indeksi (GeoID) on sallittujen rajojen ulkopuolella. - + You are requesting no change in knot multiplicity. Solmun moninkertaisuusarvoon ei pyydetty muutosta. - + The Geometry Index (GeoId) provided is not a B-spline curve. Annettu geometria-indeksi (GeoID) ei vastaa B-splini-käyrää. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Solmun indeksi on rajojen ulkopuolella. Huomaa, että OCC: n notaation mukaisesti ensimmäisellä solmulla on indeksi 1 eikä nolla. - + The multiplicity cannot be increased beyond the degree of the B-spline. Monimuotoisuusarvoa ei voi kasvattaa B-splinin astetta suuremmaksi. - + The multiplicity cannot be decreased beyond zero. Moninkertaisuusarvoa ei voi pienentää negatiiviseksi. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC ei pysty pienentämään moninkertaisuusarvoa pysyäkseen suurimmassa sallitussa toleranssissa. @@ -3894,12 +3896,12 @@ Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päät Vaihda keskenään rajoitteiden nimiä - + Unnamed constraint Nimetön rajoite - + Only the names of named constraints can be swapped. Vain nimettyjen rajoitteiden nimet voidaan vaihtaa keskenään. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ Kuitenkaan ei ole löytynyt rajoitteita, jotka liittyisivät päätepisteisiin.< All Kaikki - - - Normal - Normaali - Datums @@ -4924,34 +4916,192 @@ Kuitenkaan ei ole löytynyt rajoitteita, jotka liittyisivät päätepisteisiin.< Reference Viittaus + + + Horizontal + Vaakasuora + + Vertical + Pystysuora + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Samansuuntainen + + + + Perpendicular + Perpendicular + + + + Tangent + Tangenttina + + + + Equality + Equality + + + + Symmetric + Symmetrinen + + + + Block + Block + + + + Distance + Etäisyys + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Säde + + + + Weight + Paksuus + + + + Diameter + Halkaisija + + + + Angle + Kulma + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Näytä + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Näytä Kaikki + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Rajoitteet - - + + + + + Error Virhe @@ -5310,136 +5460,136 @@ Pisteet on asetettava lähemmäksi kuin viidesosan etäisyydelle ruudukon koosta SketcherGui::ViewProviderSketch - + Edit sketch Muokkaa luonnosta - + A dialog is already open in the task panel Valintaikkuna on jo avoinna tehtäväpaneelissa - + Do you want to close this dialog? Haluatko sulkea tämän valintaikkunan? - + Invalid sketch Virheellinen luonnos - + Do you want to open the sketch validation tool? Haluatko avata luonnoksen validointityökalun? - + The sketch is invalid and cannot be edited. Luonnos on virheellinen eikä sitä voi muokata. - + Please remove the following constraint: Poista seuraava rajoite: - + Please remove at least one of the following constraints: Poista ainakin yksi seuraavista rajoitteista: - + Please remove the following redundant constraint: Poista seuraava turha rajoite: - + Please remove the following redundant constraints: Poista seuraavat turhat rajoitteet: - + The following constraint is partially redundant: Seuraava rajoite on osittain tarpeeton: - + The following constraints are partially redundant: Seuraavat rajoitteet ovat osittain tarpeettomia: - + Please remove the following malformed constraint: Poista seuraava virheellinen rajoite: - + Please remove the following malformed constraints: Poista seuraavat virheelliset rajoitteet: - + Empty sketch Tyhjä luonnos - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (Valitse napsauttamalla) - + Fully constrained sketch Täysin rajoitettu luonnos - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Alirajoitettu luonnos <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 asteen</span></a> vapauden kanssa. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Alirajoitettu luonnos <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 asteen</span></a> vapaudesta. %2 - + Solved in %1 sec Ratkaistu %1 sekunnissa - + Unsolved (%1 sec) Ratkaisematta (%1 sekuntia) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm index 05baebcf18..91bbc8f5f0 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts index 2d19638003..f53776560f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fil.ts @@ -2663,7 +2663,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2673,12 +2675,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Ipagpalit ang mga pangalan ng pagpilit - + Rename sketch constraint Rename sketch constraint @@ -2746,42 +2748,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Humihiling ka ng walang pagbabago sa pagkarami-rami ng pinagdahunan. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Ang index ng natuklod ay wala sa hangganan. Tandaan na alinsunod sa notasyon ng OCC, ang unang buhol ay may index 1 at hindi zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Ang pagkarami-rami ay hindi maaaring mabawasan ng lampas sa zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. Ang OCC ay hindi maaaring bawasan ang maraming iba't ibang uri sa loob ng maximum na tolerasyon. @@ -3895,12 +3897,12 @@ Mga tinanggap na kumbinasyon: dalawang kurva; isang endpoint at isang curve; dal Ipagpalit ang mga pangalan ng pagpilit - + Unnamed constraint Hindi pinangalanang pagpilit - + Only the names of named constraints can be swapped. Ang mga pangalan lamang ng mga hadlang na pinangalanang maaaring ma-pagpalit. @@ -4633,11 +4635,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4905,11 +4902,6 @@ Gayunpaman, natagpuan ang walang hadlang na nag-uugnay sa mga endpoint.All Lahat - - - Normal - Normal - Datums @@ -4925,34 +4917,192 @@ Gayunpaman, natagpuan ang walang hadlang na nag-uugnay sa mga endpoint.Reference Reference + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Kapantay + + + + Perpendicular + Perpendicular + + + + Tangent + Tangent + + + + Equality + Equality + + + + Symmetric + Symmetric + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Guhit na mulâ sa gitnâ hanggang sa gilid ng bilog + + + + Weight + Weight + + + + Diameter + Diyametro + + + + Angle + Anggulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Masdan + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Ipakita lahat + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Listahan + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Kamalian @@ -5311,136 +5461,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Hindi valid ang sketch - + Do you want to open the sketch validation tool? Gusto mo bang buksan ang kasangkapan sa pag validate ng sketch? - + The sketch is invalid and cannot be edited. Ang sketch ay hindi valid at hindi pwdeng i-edit. - + Please remove the following constraint: Mangyaring alisin ang sumusunod na pagpilit: - + Please remove at least one of the following constraints: Mangyaring alisin ang hindi bababa sa isa sa mga sumusunod na mga pagpilit: - + Please remove the following redundant constraint: Mangyaring alisin ang sumusunod na paulit ulit na pagpilit: - + Please remove the following redundant constraints: Mangyaring alisin ang sumusunod na paulit ulit na mga pagpilit: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Walang laman na sketch - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (Mag-klik para pumili) - + Fully constrained sketch Kabuuang-constrained na sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Lutasin sa loob ng %1 sec - + Unsolved (%1 sec) Hindi naresolba (%1 sec) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index 06dad5d184..799ddafd32 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index d20f315620..2f41ddb0b4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -2656,7 +2656,9 @@ les contraintes invalides, les géométries dégénérées, etc. - + + + Update constraint's virtual space Mettre à jour l'espace virtuel de la contrainte @@ -2666,12 +2668,12 @@ les contraintes invalides, les géométries dégénérées, etc. Ajouter des contraintes automatiques - + Swap constraint names Intervertir les noms de contrainte - + Rename sketch constraint Renommer la contrainte d'esquisse @@ -2739,42 +2741,42 @@ les contraintes invalides, les géométries dégénérées, etc. L'intersection des courbes n'a pas pu être trouvée. Essayez d’ajouter une contrainte de coïncidence entre les sommets des courbes sur lesquels vous souhaitez appliquer un congé. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Cette version de OCE/OCC ne supporte pas l’opération de noeud. Vous avez besoin de la version 6.9.0 ou supérieure. - + BSpline Geometry Index (GeoID) is out of bounds. L'Index de la géométrie de la B-spline (GeoID) est hors limites. - + You are requesting no change in knot multiplicity. Vous ne demandez aucun changement dans la multiplicité du nœud. - + The Geometry Index (GeoId) provided is not a B-spline curve. L’Index de la géométrie (GeoID) fourni n’est pas une courbe B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L’index du nœud est hors limites. Notez que, conformément à la notation OCC, le premier nœud a un indice de 1 et non pas de zéro. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicité ne peut pas être augmentée au-delà du degré de la B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicité ne peut pas être diminuée au-delà de zéro. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC ne parvient pas à diminuer la multiplicité selon la tolérance maximale. @@ -3888,12 +3890,12 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Intervertir les noms de contrainte - + Unnamed constraint Contrainte non nommée - + Only the names of named constraints can be swapped. Seuls les noms des contraintes nommées peuvent être permutés. @@ -4557,52 +4559,52 @@ Supporte tous les systèmes d'unité sauf 'US customary' et 'Building US/Euro'.< Font size used for labels and constraints. - Font size used for labels and constraints. + Taille de police utilisée pour les libellés et contraintes. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + La vue 3D est mise à l'échelle en fonction de ce facteur. Line pattern used for grid lines. - Line pattern used for grid lines. + Motif de ligne utilisé pour la grille. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Le nombre de polygones utilisés pour approximer la géométrie. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Un dialogue s'ouvrira pour saisir la valeur des nouvelles contraintes dimensionnelles. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + L'outil de création de géométrie en cours restera actif après création. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + L'outil de création de contrainte en cours restera actif après création. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Si coché, affiche le nom sur les contraintes dimensionnelles (si défini). Show dimensional constraint name with format - Show dimensional constraint name with format + Afficher le nom de la contrainte dimensionnelle avec le format %N = %V - %N = %V + %N = %V @@ -4611,21 +4613,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + Le format d'affichage de la contrainte dimensionnelle. +Par défaut : %N = %V -%N - name parameter -%V - dimension value +%N - nom du paramètre +%V - valeur de la dimension DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + DimensionalStringFormat @@ -4635,22 +4632,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + A l'ouverture d'une esquisse, cache toutes les opérations qui en dépendent. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + A l'ouverture d'une esquisse, montre les sources des liens de géométrie externe. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + A l'ouverture d'une esquisse, montre les objets auxquels elle est attachée. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Applique les paramètres d'automatisation de la visibilité à toutes les esquisses des documents ouverts. @@ -4670,7 +4667,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + A la fermeture d'une esquisse, ramène la caméra où elle était avant son ouverture. @@ -4681,8 +4678,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Ouvrir une esquisse en mode Vue en Coupe par défaut. +Seuls les objets derrière le plan de l'esquisse sont visibles. @@ -4893,11 +4890,6 @@ Toutefois, aucune contrainte liée aux extrémités n'a été trouvée.All Tous - - - Normal - Normal - Datums @@ -4913,34 +4905,192 @@ Toutefois, aucune contrainte liée aux extrémités n'a été trouvée.Reference Référence + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coïncidents + + + + Point on Object + Point on Object + + + + Parallel + Parallèle + + + + Perpendicular + Perpendiculaire + + + + Tangent + Tangent + + + + Equality + Equality + + + + Symmetric + Symétrique + + + + Block + Bloc + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Rayon + + + + Weight + Poids + + + + Diameter + Diamètre + + + + Angle + Angle + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vue + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Afficher tout + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Liste  + + + Internal alignments will be hidden Les alignements internes seront masqués - + Hide internal alignment Cacher les alignements internes - + Extended information will be added to the list Des informations étendues seront affichées dans la liste - + + Geometric + Geometric + + + Extended information Informations étendues - + Constraints Contraintes - - + + + + + Error Erreur @@ -5299,136 +5449,136 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% SketcherGui::ViewProviderSketch - + Edit sketch Modifier l'esquisse - + A dialog is already open in the task panel Une boîte de dialogue est déjà ouverte dans le panneau des tâches - + Do you want to close this dialog? Voulez-vous fermer cette boîte de dialogue? - + Invalid sketch Esquisse non valide - + Do you want to open the sketch validation tool? Voulez-vous ouvrir l'outil de validation d'esquisse ? - + The sketch is invalid and cannot be edited. L'esquisse n'est pas valide et ne peut pas être éditée. - + Please remove the following constraint: Veuillez supprimer la contrainte suivante : - + Please remove at least one of the following constraints: Veuillez supprimer au moins une des contraintes suivantes : - + Please remove the following redundant constraint: Veuillez supprimer la contrainte redondante suivante : - + Please remove the following redundant constraints: Veuillez supprimer les contraintes redondantes suivantes : - + The following constraint is partially redundant: La contrainte suivante est partiellement redondante : - + The following constraints are partially redundant: Les contraintes suivantes sont partiellement redondantes : - + Please remove the following malformed constraint: Veuillez supprimer la contrainte malformée suivante : - + Please remove the following malformed constraints: Veuillez supprimer les contraintes malformées suivantes : - + Empty sketch Esquisse vide - + Over-constrained sketch Esquisse sur-contrainte - + Sketch contains malformed constraints L'esquisse contient des contraintes malformées - + Sketch contains conflicting constraints L'esquisse contient des contraintes contradictoires - + Sketch contains redundant constraints L'esquisse contient des contraintes redondantes - + Sketch contains partially redundant constraints L'esquisse contient des contraintes partiellement redondantes - - - - + + + + (click to select) (cliquez pour sélectionner) - + Fully constrained sketch Esquisse entièrement contrainte - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Esquisse sous-contrainte avec <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degré</span></a> de liberté - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Esquisse sous-contrainte avec <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrés</span></a> de liberté - + Solved in %1 sec Résolu en %1 secondes - + Unsolved (%1 sec) Non résolu (%1 sec) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm index 6f6b63117d..e72100c142 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts index 48d7dee0bd..897e3a5cbd 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_gl.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Trocar os nomes das constricións entre si - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Non se pode adiviñar a intersección de curvas. Tenta engadir unha constrición entre os vértices das curvas que queres achaflanar. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versión de OCE/OCC non soporta operacións de nó. Ti necesitas 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. A xeometría BSpline de Index (GeoID) está fora da construción. - + You are requesting no change in knot multiplicity. Vostede está solicitando sen troco en multiplicidade de nodo. - + The Geometry Index (GeoId) provided is not a B-spline curve. A Xeometría Index (Geold) proporcionada non é unha curva BSpline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice de nodo está fora dos límites. Note que según en concordancia coa notación da OCC, o primeiro nodo ten índice 1 e non 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade non pode incrementada máis alá do grao da BSpline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade non pode ser diminuida máis alá de cero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC non é quen de diminuir a multiplicidade dentro da tolerancia máxima. @@ -3892,12 +3894,12 @@ As combinacións aceptadas son: dúas curvas; cabo e curva; dous cabos; dúas cu Trocar os nomes das constricións entre si - + Unnamed constraint Constrición sen nome - + Only the names of named constraints can be swapped. Só se poden permutar os nomes das constricións xa nomeadas. @@ -4630,11 +4632,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4902,11 +4899,6 @@ Pola contra, non se atoparon constricións ligadas os cabos. All Todo - - - Normal - Normal - Datums @@ -4922,34 +4914,192 @@ Pola contra, non se atoparon constricións ligadas os cabos. Reference Referencia + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincidente + + + + Point on Object + Point on Object + + + + Parallel + Paralela + + + + Perpendicular + Perpendicular + + + + Tangent + Tanxente + + + + Equality + Equality + + + + Symmetric + Simetría + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Raio + + + + Weight + Peso + + + + Diameter + Diámetro + + + + Angle + Ángulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Amosar todos + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Listaxe + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Erro @@ -5308,136 +5458,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Esbozo non válido - + Do you want to open the sketch validation tool? Quere abrir a ferramenta de validación do esbozo? - + The sketch is invalid and cannot be edited. O esbozo non é válido e non se pode editar. - + Please remove the following constraint: Por favor, remova a seguinte constrición: - + Please remove at least one of the following constraints: Por favor, remova polo menos unha das seguintes constricións: - + Please remove the following redundant constraint: Por favor, remova a seguinte constrición redundante: - + Please remove the following redundant constraints: Por favor, remova a seguintes constricións redundantes: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Esbozo baleiro - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (prema para escolmar) - + Fully constrained sketch Esbozo totalmente constrinxido - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Resolvido en %1 segundos - + Unsolved (%1 sec) Non resolvido (%1 s.) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm index b9390b88bf..faee1c467d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 7b97464fe5..6941bc1004 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -2731,7 +2731,9 @@ nevaljana ograničenja, degenerirana geometrija itd. - + + + Update constraint's virtual space Ažuriraj virtualni prostor ograničenja @@ -2743,12 +2745,12 @@ nevaljana ograničenja, degenerirana geometrija itd. Dodajte automatska ograničenja - + Swap constraint names Zamjeni imena ograničenja - + Rename sketch constraint Preimenujte ograničenja skica @@ -2818,42 +2820,42 @@ nevaljana ograničenja, degenerirana geometrija itd. Nije moguće odrediti sjecište krivulje. Pokušajte dodati podudarno ograničenje između vrhova krivulje koju namjeravate obrubiti. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ova verzija ocean i/OCC ne podržava operacije čvora. Trebaš 6.9.0 ili noviju. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Indeks Geometrije (GeoID) je izvan granica. - + You are requesting no change in knot multiplicity. Vi zahtijevate: bez promjena u mnoštvu čvorova. - + The Geometry Index (GeoId) provided is not a B-spline curve. Indeks Geometrija (GeoId) pod uvjetom da nije B-spline krivulja. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Čvor indeks je izvan granica. Imajte na umu da u skladu s OCC notacijom, prvi čvor ima indeks 1 a ne nula. - + The multiplicity cannot be increased beyond the degree of the B-spline. Mnoštvo se ne može povećavati iznad stupanja mnoštva b-spline krive. - + The multiplicity cannot be decreased beyond zero. Mnoštvo se ne može smanjiti ispod nule. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC je uspio smanjiti mnoštvo unutar maksimalne tolerancije. @@ -3975,12 +3977,12 @@ Prihvatljive kombinacije: dvije krivulje; jedna krajnja točka i krivulja; dvije Zamjeni imena ograničenja - + Unnamed constraint Bezimeno ograničenje - + Only the names of named constraints can be swapped. Samo imena imenovanih ograničenja mogu biti zamijenjena. @@ -4731,11 +4733,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -5009,11 +5006,6 @@ Međutim, nema povezanih ograničenja na krajnje točake. All Sve - - - Normal - Normalno - Datums @@ -5029,36 +5021,194 @@ Međutim, nema povezanih ograničenja na krajnje točake. Reference Referenca + + + Horizontal + Vodoravno + + Vertical + Okomito + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paralelno + + + + Perpendicular + Okomito + + + + Tangent + Tangenta + + + + Equality + Equality + + + + Symmetric + Simetrično + + + + Block + Blok + + + + Distance + Udaljenost + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radijus + + + + Weight + Važnost + + + + Diameter + Promjer + + + + Angle + Kut + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Pregled + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Prikaži sve + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Popis + + + Internal alignments will be hidden Unutarnja poravnanja bit će skrivena - + Hide internal alignment Sakrij unutarnje poravnanje - + Extended information will be added to the list Proširene informacije bit će dodane na popis - + + Geometric + Geometric + + + Extended information Proširene informacije - + Constraints Ograničenja - - + + + + + Error Pogreška @@ -5429,136 +5579,136 @@ Točke moraju biti postavljene bliže od petine razdaljine rešetke kako bi se p SketcherGui::ViewProviderSketch - + Edit sketch Uredi skicu - + A dialog is already open in the task panel Dijalog je već otvoren u ploči zadataka - + Do you want to close this dialog? Želite li zatvoriti ovaj dijalog? - + Invalid sketch Neispravna skica - + Do you want to open the sketch validation tool? Želite li otvoriti alat provjera valjanosti skice? - + The sketch is invalid and cannot be edited. Skica je neispravna i ne može se uređivati. - + Please remove the following constraint: Molim uklonite sljedeće ograničenje: - + Please remove at least one of the following constraints: Molim uklonite barem jedno od sljedećih ograničenja: - + Please remove the following redundant constraint: Molimo obrišite ovo redundantno ograničenje: - + Please remove the following redundant constraints: Molimo obrišite ova redundantna ograničenja: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Prazan skica - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (klikni za odabir) - + Fully constrained sketch Potpuno ograničena skica - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Riješeno za %1 sek - + Unsolved (%1 sec) Neriješen (%1 sek) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm index 35654c34f9..68e1628ca2 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index 474616d768..aa282c6436 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -2659,7 +2659,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space A kényszerítés virtuális helyének frissítése @@ -2669,12 +2671,12 @@ invalid constraints, degenerated geometry, etc. Automatikus kényszerítés hozzáadása - + Swap constraint names Kényszerítés nevek cseréje - + Rename sketch constraint Vázlat kényszerítés átnevezése @@ -2742,42 +2744,42 @@ invalid constraints, degenerated geometry, etc. Nem tudja meghatározni a görbék metszéspontját. Próbáljon meg hozzáadni egybeesés kényszerítést a görbék csúcsaihoz, melyeket le szeretné kerekíteni. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ez az OCE/OCC verzió nem támogatja a szög műveletet. 6.9.0 vagy magasabb verzió szükséges. - + BSpline Geometry Index (GeoID) is out of bounds. Bgörbe geometria Index (GeoID) nem rendelkezik kényszerítésekkel. - + You are requesting no change in knot multiplicity. Nem kér változtatást a csomó többszörözésére. - + The Geometry Index (GeoId) provided is not a B-spline curve. A megadott geometria Index (GeoId) nem egy Bgörbe. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. A csomó jelölés határvonalakon kívülre esik. Ne feledje, hogy a megfelelő OCC jelölés szerint, az első csomót jelölése 1 és nem nulla. - + The multiplicity cannot be increased beyond the degree of the B-spline. A sokszorozás nem nőhet a B-görbe szögének értéke fölé. - + The multiplicity cannot be decreased beyond zero. A sokszorozást nem csökkentheti nulla alá. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC képtelen csökkenteni a sokszorozást a maximális megengedett tűrésen belül. @@ -3891,12 +3893,12 @@ Elfogadott kombinációk: két görbe; egy végpont és egy görbe; két végpon Kényszerítés nevek cseréje - + Unnamed constraint Névtelen illesztés - + Only the names of named constraints can be swapped. Névvel ellátott illesztéseknek csak a neveit lehet felcserélni. @@ -4562,52 +4564,52 @@ Az 'USA szokásos' és az 'USA/Euro építés' kivételével minden egységrends Font size used for labels and constraints. - Font size used for labels and constraints. + Címkékhez és kényszerítésekhez használt betűméret. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + Ez alapján kerül a 3D nézet méretezésre. Line pattern used for grid lines. - Line pattern used for grid lines. + Rácsvonalakhoz használt vonalminta. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + A geometria-közelítéshez használt sokszögek száma. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Megjelenik egy párbeszédablak, ahol új dimenziókényszerek értékeket adhat meg. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + A jelenlegi vázlatkészítő eszköz a létrehozás után is aktív marad. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + Az aktuális kényszerítés eszköz a létrehozás után is aktív marad. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Ha be van jelölve, a nevet dimenziós kényszerítéseken jeleníti meg (ha van ilyen). Show dimensional constraint name with format - Show dimensional constraint name with format + Dimenziós kényszerítés nevének megjelenítése formátummal %N = %V - %N = %V + %N = %V @@ -4616,21 +4618,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + A méretkényszer karakterláncának megjelenítése. +Alapértelmezett érték: %N = %V -%N - name parameter -%V - dimension value +%N - névparaméter +%V - dimenzióérték DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + Dimenzió szövegformátuma @@ -4640,22 +4637,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Egy vázlat megnyitásakor, a függőséggel rendelkező összes jellemző elrejtése. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Vázlat megnyitásakor mutassa meg a külső geometriai hivatkozások forrásait. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Egy vázlat megnyitásakor, a vázlathoz kapcsolódó objektumokat mutassa. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Aktuális láthatóság automatizálási beállítások alkalmazása a megnyitott dokumentumok összes vázlatára. @@ -4675,7 +4672,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Egy vázlat bezárásakor, mozgassa a kamerát vissza oda, ahova a vázlat megnyitása előtt volt. @@ -4686,8 +4683,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Alapértelmezés szerint nyissa meg a vázlatot Szakasz nézetben. +A tárgyak csak a vázlatsík mögött lesznek láthatók. @@ -4899,11 +4896,6 @@ Azonban, nem találhatók a végpontokhoz kötött kényszerítések.All Minden - - - Normal - Alapértelmezett - Datums @@ -4919,34 +4911,192 @@ Azonban, nem találhatók a végpontokhoz kötött kényszerítések.Reference Referencia + + + Horizontal + Vízszintes + + Vertical + Függőleges + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Párhuzamos + + + + Perpendicular + Perpendicular + + + + Tangent + Érintő + + + + Equality + Equality + + + + Symmetric + Szimmetrikus + + + + Block + Blokk + + + + Distance + Távolság + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Sugár + + + + Weight + Súly + + + + Diameter + Átmérő + + + + Angle + Szög + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Nézet + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Összes megjelenítése + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden A belső igazítások rejtve maradnak - + Hide internal alignment Belső igazítás elrejtése - + Extended information will be added to the list A bővített információk felkerülnek a listára - + + Geometric + Geometric + + + Extended information Részletes információ - + Constraints Kényszerítések - - + + + + + Error Hiba @@ -5305,136 +5455,136 @@ A pontokat a rácsméret ötödénél közelebb kell beállítani egy rácsvonal SketcherGui::ViewProviderSketch - + Edit sketch Vázlat szerkesztése - + A dialog is already open in the task panel Egy párbeszédablak már nyitva van a feladat panelen - + Do you want to close this dialog? Szeretné bezárni a párbeszédpanelt? - + Invalid sketch Érvénytelen vázlat - + Do you want to open the sketch validation tool? Szeretné megnyitni a vázlat érvényesítés eszközt? - + The sketch is invalid and cannot be edited. A vázlat érvénytelen, és nem szerkeszthető. - + Please remove the following constraint: Kérjük, távolítsa el az alábbi ilesztést: - + Please remove at least one of the following constraints: Kérjük, távolítsa el, legalább az egyiket a következő kényszerítésekből: - + Please remove the following redundant constraint: Kérjük, távolítsa el a következő felesleges kényszerítést: - + Please remove the following redundant constraints: Kérjük, távolítsa el a következő felesleges kényszerítéseket: - + The following constraint is partially redundant: A következő kényszerítés részben felesleges: - + The following constraints are partially redundant: A következő kényszerítések részben feleslegesek: - + Please remove the following malformed constraint: Távolítsa el a következő hibás kényszerítést: - + Please remove the following malformed constraints: Távolítsa el a következő hibás kényszerítéseket: - + Empty sketch Üres vázlat - + Over-constrained sketch Túl sok kényszerítést tartalmazó vázlat - + Sketch contains malformed constraints A vázlat hibásan formázott kényszerítéseket tartalmaz - + Sketch contains conflicting constraints Vázlat szabálytalan kényszerítéseket tartalmaz - + Sketch contains redundant constraints A vázlat felesleges kényszerítéseket tartalmaz - + Sketch contains partially redundant constraints A vázlat részlegesen felesleges kényszerítéseket tartalmaz - - - - + + + + (click to select) (kattintás a kijelöléshez) - + Fully constrained sketch Teljesen zárolt vázlat - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Alul korlátozott vázlat <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 fok</span></a> szabadsággal. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Alul korlátozott vázlat <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 fokkos</span></a> szabadsággal. %2 - + Solved in %1 sec Megoldva %1 másodperc alatt - + Unsolved (%1 sec) Megoldatlan (%1 mp) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm index 41d5715342..18afb00a9d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts index 1cbe9d6dda..c58dd769d4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_id.ts @@ -2664,7 +2664,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2674,12 +2676,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Tukarlah nama kendala - + Rename sketch constraint Rename sketch constraint @@ -2747,42 +2749,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Bspline GeoId berada di luar batas. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indeks simpul berada di luar batas. Perhatikan bahwa sesuai dengan notasi OCC, simpul pertama memiliki indeks 1 dan bukan nol. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Multiplisitas tidak dapat ditingkatkan melampaui tingkat b-spline. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC tidak dapat mengurangi multiplisitas dalam toleransi maksimum. @@ -3892,12 +3894,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tukarlah nama kendala - + Unnamed constraint Unnamed constraint - + Only the names of named constraints can be swapped. Hanya nama- nama kendala yang bisa ditukar. @@ -4630,11 +4632,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4900,11 +4897,6 @@ However, no constraints linking to the endpoints were found. All Semua - - - Normal - Normal - Datums @@ -4920,34 +4912,192 @@ However, no constraints linking to the endpoints were found. Reference Referensi + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paralel + + + + Perpendicular + Perpendicular + + + + Tangent + Garis singgung + + + + Equality + Equality + + + + Symmetric + Simetris + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Jari-jari + + + + Weight + Weight + + + + Diameter + Diameter + + + + Angle + Sudut + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Tampilan + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Tunjukkan semua + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Daftar + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Kesalahan @@ -5306,136 +5456,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sketsa tidak valid - + Do you want to open the sketch validation tool? Apakah Anda ingin membuka alat validasi sketsa ? - + The sketch is invalid and cannot be edited. sketsa tidak valid dan tidak dapat diedit. - + Please remove the following constraint: Harap hapus batasan berikut : - + Please remove at least one of the following constraints: Harap hapus setidaknya satu dari batasan berikut: - + Please remove the following redundant constraint: Harap hapus batasan berlebihan berikut ini : - + Please remove the following redundant constraints: Harap hapus batasan berlebihan berikut ini : - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Sketsa kosong - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (klik untuk memilih) - + Fully constrained sketch Sketsa terbatas - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Dipecahkan dalam % 1 detik - + Unsolved (%1 sec) Tidak terpecahkan ( % 1 dtk) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index aa01a4e356..78fc7a9e24 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 80c0c4b41a..4b6c69d209 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -1986,12 +1986,12 @@ Questo cancellerà la proprietà 'Supporto', se presente. Split edge - Split edge + Dividere spigolo Splits an edge into two while preserving constraints - Splits an edge into two while preserving constraints + Dividere uno spingo in due preservando i vincoli @@ -2336,7 +2336,7 @@ vincoli non validi, geometria degenerata, ecc. Swap PointOnObject+tangency with point to curve tangency - Swap PointOnObject+tangency with point to curve tangency + Scambiare PointOnObject+tangenza con il punto a tangenza curva @@ -2394,7 +2394,7 @@ vincoli non validi, geometria degenerata, ecc. Add radiam constraint - Add radiam constraint + Vincolare il raggio @@ -2573,7 +2573,7 @@ vincoli non validi, geometria degenerata, ecc. Split edge - Split edge + Dividere spigolo @@ -2662,7 +2662,9 @@ vincoli non validi, geometria degenerata, ecc. - + + + Update constraint's virtual space Aggiorna lo spazio virtuale del vincolo @@ -2672,12 +2674,12 @@ vincoli non validi, geometria degenerata, ecc. Aggiungi vincoli automatici - + Swap constraint names Scambia i nomi dei vincoli - + Rename sketch constraint Rinomina il vincolo dello schizzo @@ -2745,42 +2747,42 @@ vincoli non validi, geometria degenerata, ecc. Impossibile determinare l'intersezione delle curve. Provare ad aggiungere un vincolo di coincidenza tra i vertici delle curve che si intende raccordare. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Questa versione di OCE/OCC non supporta l'operazione di nodo. Serve la versione 6.9.0 o superiore. - + BSpline Geometry Index (GeoID) is out of bounds. L'indice della geometria della B-spline (GeoID) è fuori limite. - + You are requesting no change in knot multiplicity. Non stai richiedendo modifiche nella molteplicità dei nodi. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'indice della geometria (GeoID) fornito non è una curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'indice del nodo è fuori dai limiti. Notare che, in conformità alla numerazione OCC, il primo nodo ha indice 1 e non zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La molteplicità non può essere aumentata oltre il grado della B-spline. - + The multiplicity cannot be decreased beyond zero. La molteplicità non può essere diminuita al di là di zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC non è in grado di diminuire la molteplicità entro la tolleranza massima. @@ -3423,22 +3425,22 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Sketcher Constraint Substitution - Sketcher Constraint Substitution + Sostituzione vincoli dello Schizzo Keep notifying me of constraint substitutions - Keep notifying me of constraint substitutions + Continuare a notificare le sostituzione dei vincoli Endpoint to edge tangency was applied instead. - Endpoint to edge tangency was applied instead. + È stata applicata invece la tangenza segmento sul punto finale. Endpoint to edge tangency was applied. The point on object constraint was deleted. - Endpoint to edge tangency was applied. The point on object constraint was deleted. + È stato applicato il vincolo tangenza segmento su punto finale. È stato eliminato il vincolo punto su oggetto. @@ -3894,12 +3896,12 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Scambia i nomi dei vincoli - + Unnamed constraint Vincolo senza nome - + Only the names of named constraints can be swapped. Si possono scambiare solo i nomi dei vincoli denominati. @@ -4324,12 +4326,12 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Working colors - Working colors + Colori in uso Coordinate text - Coordinate text + Testo coordinate @@ -4339,27 +4341,27 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Creating line - Creating line + Creazione linea Cursor crosshair - Cursor crosshair + Puntatore del cursore Geometric element colors - Geometric element colors + Colore elemento geometrico Internal alignment edge - Internal alignment edge + Bordo allineamento interno Unconstrained - Unconstrained + Non vincolato @@ -4401,12 +4403,12 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Deactivated constraint - Deactivated constraint + Vincolo disattivato Colors outside Sketcher - Colors outside Sketcher + Colori fuori dallo Schizzo @@ -4421,7 +4423,7 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Constrained - Constrained + Vincolato @@ -4431,7 +4433,7 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Fully constrained Sketch - Fully constrained Sketch + Schizzo completamente vincolato @@ -4466,12 +4468,12 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Constraint colors - Constraint colors + Colore vincoli Constraint symbols - Constraint symbols + Simboli vincolo @@ -4486,7 +4488,7 @@ Per ottenere l'effetto è necessario accedere nuovamente alla modalità di modif Expression dependent constraint - Expression dependent constraint + Vincolo con espressione @@ -4563,52 +4565,52 @@ Supporta tutti i sistemi di unità ad eccezione di 'US customary' e 'Building US Font size used for labels and constraints. - Font size used for labels and constraints. + Dimensione del carattere utilizzata per etichette e vincoli. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + La vista 3D è scalata in base a questo fattore. Line pattern used for grid lines. - Line pattern used for grid lines. + Modello di linea utilizzato per le linee della griglia. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Il numero di poligoni utilizzati per l'approssimazione della geometria. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Apparirà una finestra di dialogo per inserire un valore per i nuovi vincoli dimensionali. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + Lo strumento corrente di creazione dello schizzo rimarrà attivo dopo la creazione. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + Lo strumento corrente di creazione dello schizzo rimarrà attivo dopo la creazione. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Se selezionato, visualizza il nome sui vincoli dimensionali (se esiste). Show dimensional constraint name with format - Show dimensional constraint name with format + Mostra il nome del vincolo dimensionale con formato %N = %V - %N = %V + %N = %V @@ -4617,21 +4619,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + Il formato della presentazione della stringa di vincolo dimensionale. +Predefinito a: %N = %V -%N - name parameter -%V - dimension value +%N - parametro nome +%V - valore di dimensione DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + DimensionalStringFormat @@ -4641,22 +4638,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Quando si apre uno schizzo, nasconde tutte le funzionalità che dipendono da esso. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Quando viene aperto uno schizzo, mostrare i percorsi dei collegamenti alle geometrie esterne. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Quando si apre uno schizzo, mostra gli oggetti a cui è collegato lo schizzo. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Applica le attuali impostazioni di automazione di visibilità a tutti gli schizzi nei documenti aperti. @@ -4676,7 +4673,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Quando si chiude lo schizzo, ripristina la telecamera nella posizione in cui era prima che lo schizzo venisse aperto. @@ -4687,13 +4684,13 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Apri uno schizzo in modalità Vista Sezione per impostazione predefinita. +Quindi gli oggetti sono visibili solo dietro il piano dello schizzo. Open sketch in Section View mode - Open sketch in Section View mode + Apri schizzo in modalità Vista in Sezione @@ -4900,11 +4897,6 @@ Tuttavia, non sono stati trovati i vincoli che riguardano i punti finali.All Tutti - - - Normal - Normale - Datums @@ -4920,34 +4912,192 @@ Tuttavia, non sono stati trovati i vincoli che riguardano i punti finali.Reference Riferimento + + + Horizontal + Orizzontale + + Vertical + Verticale + + + + Coincident + Coincidente + + + + Point on Object + Point on Object + + + + Parallel + Parallelo + + + + Perpendicular + Perpendicolare + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Simmetrica + + + + Block + Blocco + + + + Distance + Distanza + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Raggio + + + + Weight + Spessore + + + + Diameter + Diametro + + + + Angle + Angolo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostra tutto + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Elenco + + + Internal alignments will be hidden Gli allineamenti interni verranno nascosti - + Hide internal alignment Nascondi l'allineamento interno - + Extended information will be added to the list Le informazioni estese verranno aggiunte alla lista - + + Geometric + Geometric + + + Extended information Informazioni estese - + Constraints Vincoli - - + + + + + Error Errore @@ -5306,136 +5456,136 @@ I punti devono essere impostati più vicino di un quinto della dimensione della SketcherGui::ViewProviderSketch - + Edit sketch Modifica lo schizzo - + A dialog is already open in the task panel Nel pannello azioni c'è già una finestra di dialogo aperta - + Do you want to close this dialog? Vuoi chiudere questa finestra di dialogo? - + Invalid sketch Schizzo non valido - + Do you want to open the sketch validation tool? Vuoi aprire lo strumento di convalida di schizzo? - + The sketch is invalid and cannot be edited. Lo schizzo non è valido e non può essere modificato. - + Please remove the following constraint: Si prega di rimuovere il seguente vincolo: - + Please remove at least one of the following constraints: Si prega di rimuovere almeno uno dei seguenti vincoli: - + Please remove the following redundant constraint: Si prega di rimuovere il seguente vincolo ridondante: - + Please remove the following redundant constraints: Si prega di rimuovere i seguenti vincoli ridondanti: - + The following constraint is partially redundant: Il seguente vincolo è parzialmente ridondante: - + The following constraints are partially redundant: I seguenti vincoli sono parzialmente ridondanti: - + Please remove the following malformed constraint: Rimuovere il seguente vincolo malformato: - + Please remove the following malformed constraints: Rimuovere i seguenti vincoli malformati: - + Empty sketch Schizzo vuoto - + Over-constrained sketch - Over-constrained sketch + Schizzo sovravincolato - + Sketch contains malformed constraints - Sketch contains malformed constraints + Lo schizzo contiene vincoli malposti - + Sketch contains conflicting constraints - Sketch contains conflicting constraints - - - - Sketch contains redundant constraints - Sketch contains redundant constraints + Lo schizzo contiene vincoli in conflitto - Sketch contains partially redundant constraints - Sketch contains partially redundant constraints + Sketch contains redundant constraints + Lo schizzo contiene vincoli ridondanti - - - - + + Sketch contains partially redundant constraints + Lo schizzo contiene vincoli parzialmente ridondanti + + + + + + (click to select) (cliccare quì per selezionarli) - + Fully constrained sketch Schizzo completamente vincolato - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Schizzo sotto-vincolato con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grado</span></a> di libertà. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Schizzo sotto-vincolato con <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 gradi</span></a> di libertà. %2 - + Solved in %1 sec Risolto in %1 sec - + Unsolved (%1 sec) Non risolto (%1 sec) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm index 6da715d7b0..fa2379ce59 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index b3b9b3975b..7e86b95b75 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -2655,7 +2655,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space 拘束の仮想スペースを更新 @@ -2665,12 +2667,12 @@ invalid constraints, degenerated geometry, etc. 自動拘束を追加 - + Swap constraint names 拘束名を交換 - + Rename sketch constraint スケッチ拘束の名前を変更 @@ -2738,42 +2740,42 @@ invalid constraints, degenerated geometry, etc. 曲線の交点を推定できません。フィレット対象の曲線の頂点の間に一致拘束を追加してみてください。 - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. このバージョンの OCE/OCC はノット操作をサポートしていません。バージョン 6.9.0 以上が必要です。 - + BSpline Geometry Index (GeoID) is out of bounds. B-スプラインのジオメトリー番号（ジオID）が範囲外です。 - + You are requesting no change in knot multiplicity. ノット多重度で変更が起きないように要求しています。 - + The Geometry Index (GeoId) provided is not a B-spline curve. 入力されたジオメトリー番号（ジオID）がB-スプライン曲線になりません。 - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. ノット・インデックスが境界外です。OCCの記法に従うと最初のノットは1と非ゼロのインデックスを持ちます。 - + The multiplicity cannot be increased beyond the degree of the B-spline. B-スプラインの次数を越えて多重度を増やすことはできません。 - + The multiplicity cannot be decreased beyond zero. 0を越えて多重度を減らすことはできません。 - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCCは最大許容範囲内で多重度を減らすことができまぜん。 @@ -3887,12 +3889,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 拘束名を交換 - + Unnamed constraint 名前のない拘束 - + Only the names of named constraints can be swapped. スワップできるのは名前のついた拘束だけです。 @@ -4555,52 +4557,52 @@ Supports all unit systems except 'US customary' and 'Building US/Euro'. Font size used for labels and constraints. - Font size used for labels and constraints. + ラベルと拘束で使用されるフォントサイズ. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + この係数に基づいて3Dビューが拡大縮小されます。 Line pattern used for grid lines. - Line pattern used for grid lines. + グリッド線に使用される線種. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + ジオメトリー近似で使用されるポリゴン数. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + 新しい寸法拘束の値を入力するためのダイアログがポップアップします。 The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + 現在のスケッチャー作成ツールは作成後も有効です。 The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + 現在の制約作成ツールは、作成後もアクティブになります。 If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + チェックされている場合、寸法拘束の名前を表示します (存在する場合)。 Show dimensional constraint name with format - Show dimensional constraint name with format + フォーマットで寸法拘束名を表示する %N = %V - %N = %V + %N = %V @@ -4609,21 +4611,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + 寸法拘束文字列プレゼンテーションのフォーマット。 +デフォルトは %N = %V -%N - name parameter -%V - dimension value +%N - 名前パラメータ +%V - 寸法値 DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + 寸法の文字列形式 @@ -4633,22 +4630,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + スケッチを開くとき、それに依存するすべての機能を非表示にします。 When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + スケッチを開くとき、外部ジオメトリリンクのソースを表示します。 When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + スケッチを開くとき、スケッチが添付されているオブジェクトを表示します。 Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + 開いているドキュメント内のすべてのスケッチに現在の表示オートメーション設定を適用します。 @@ -4668,7 +4665,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + スケッチを閉じるときは、スケッチを開く前の位置にカメラを戻します。 @@ -4679,8 +4676,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + スケッチは、デフォルトでは断面図モードで開きます。 +この場合、オブジェクトはスケッチ平面の背後にのみ表示されます。 @@ -4892,11 +4889,6 @@ However, no constraints linking to the endpoints were found. All すべて - - - Normal - 標準 - Datums @@ -4912,34 +4904,192 @@ However, no constraints linking to the endpoints were found. Reference 参照 + + + Horizontal + 水平方向 + + Vertical + 垂直方向 + + + + Coincident + 一致 + + + + Point on Object + Point on Object + + + + Parallel + 平行 + + + + Perpendicular + 直交する|鉛直な + + + + Tangent + 正接 + + + + Equality + Equality + + + + Symmetric + 対称 + + + + Block + ブロック + + + + Distance + 距離 + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + 半径 + + + + Weight + 太さ + + + + Diameter + 直径 + + + + Angle + 角度 + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + ビュー + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + 全て表示 + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + リスト + + + Internal alignments will be hidden 内部アライメントは非表示になります - + Hide internal alignment 内部アライメントを非表示 - + Extended information will be added to the list 拡張情報がリストに追加されます。 - + + Geometric + Geometric + + + Extended information 拡張情報 - + Constraints Constraints - - + + + + + Error エラー @@ -5298,136 +5448,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch スケッチを編集 - + A dialog is already open in the task panel タスクパネルで既にダイアログが開かれています - + Do you want to close this dialog? このダイアログを閉じますか？ - + Invalid sketch スケッチが無効です - + Do you want to open the sketch validation tool? スケッチ検証ツールを起動しますか? - + The sketch is invalid and cannot be edited. スケッチが不正で、編集できません。 - + Please remove the following constraint: 以下の拘束を削除してください: - + Please remove at least one of the following constraints: 以下の拘束から少なくとも1つを削除してください: - + Please remove the following redundant constraint: 以下の不要な拘束を削除してください: - + Please remove the following redundant constraints: 以下の不要な拘束を削除してください: - + The following constraint is partially redundant: 以下の拘束は一部が冗長です: - + The following constraints are partially redundant: 以下の拘束は一部が冗長です: - + Please remove the following malformed constraint: 次の不正な拘束を削除してください: - + Please remove the following malformed constraints: 次の不正な拘束を削除してください: - + Empty sketch スケッチが空です - + Over-constrained sketch 過剰拘束されたスケッチ - + Sketch contains malformed constraints スケッチに不正な拘束が含まれています - + Sketch contains conflicting constraints スケッチに競合する拘束が含まれています - + Sketch contains redundant constraints スケッチに冗長な拘束が含まれています - + Sketch contains partially redundant constraints スケッチに一部が冗長な拘束が含まれています - - - - + + + + (click to select) （クリックすると選択） - + Fully constrained sketch スケッチが完全拘束になりました - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1</span></a> 自由度の拘束下のスケッチ。%1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1</span></a> 自由度の拘束下のスケッチ。%2 - + Solved in %1 sec %1 秒で求解しました - + Unsolved (%1 sec) 求解できません（%1 秒） diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm index 3a84c912d9..d2a8036956 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts index 762ed72233..0a78ae6d15 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_lt.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Sukeisti sąryšių pavadinimus - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Neįmanoma nustatyti kreivių sankirtos. Pabandykite pridėti tapatumo apribojimą tarp dviejų kreivių, kurias norite užapvalinti, viršūnių. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Jūs prašote nekeisti mazgo sudėtingumo laipsnio. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Mazgo indeksas išėjo iš ribų. Atkreipkite dėmesį, kad pagal OCC žymėjimą, pirmojo mazgo indeksas yra lygus 1, o ne 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Mazgo sudėtingumas negali būti mažesnis, nei nulis. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC negali sumažinti sudėtingumo didžiausio leistino nuokrypio ribose. @@ -3894,12 +3896,12 @@ Priimtini deriniai: dvi kreivės; galinis taškas ir kreivė; du galiniai taška Sukeisti sąryšių pavadinimus - + Unnamed constraint Sąryšis be pavadinimo - + Only the names of named constraints can be swapped. Tik pavadintų sąryšių vardai gali būti sukeisti vietomis. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ Visgi, nei vienas sąryšis ar apribojimas nėra susietas su galiniais šių lan All Visi - - - Normal - Įprastiniai - Datums @@ -4924,34 +4916,192 @@ Visgi, nei vienas sąryšis ar apribojimas nėra susietas su galiniais šių lan Reference Orientyras + + + Horizontal + Gulščiai + + Vertical + Stačiai + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Lygiagretus + + + + Perpendicular + Perpendicular + + + + Tangent + Liestinė + + + + Equality + Equality + + + + Symmetric + Vienodai + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Spindulys + + + + Weight + Weight + + + + Diameter + Diameter + + + + Angle + Kampas + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Rodymas + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Rodyti viską + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Sąrašas + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Klaida @@ -5310,136 +5460,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Sugadintas brėžinys - + Do you want to open the sketch validation tool? Ar norite atverti brėžinio tikrinimo priemonę? - + The sketch is invalid and cannot be edited. Brėžinys yra sugadintas ir negali būti taisomas. - + Please remove the following constraint: Prašom, pašalinkite šiuos sąryšius: - + Please remove at least one of the following constraints: Prašome pašalinti bent vieną šių sąryšių: - + Please remove the following redundant constraint: Prašome pašalinti šiuos perteklinius sąryšius: - + Please remove the following redundant constraints: Prašome pašalinti šiuos perteklinius sąryšius: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Tuščias brėžinys - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (spauskite ir pažymėkite) - + Fully constrained sketch Visiškai suvaržytas (vienareikšmiškai apibrėžtas) brėžinys - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Išspręsta per %1 s - + Unsolved (%1 sec) Neišspręsta (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm index 940b4895fb..91f2e85cc5 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index a4f5069c8a..4322823e2c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Rechthoeken maken Creates a rectangle in the sketch - Creates a rectangle in the sketch + Maakt een rechthoek in de schets @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Gecentreerde rechthoek Rounded rectangle - Rounded rectangle + Afgeronde rechthoek @@ -1193,12 +1193,12 @@ met betrekking tot een lijn of een derde punt Create rounded rectangle - Create rounded rectangle + Maak afgeronde rechthoek Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Maak een afgeronde rechthoek in de schets @@ -1337,12 +1337,12 @@ met betrekking tot een lijn of een derde punt Create centered rectangle - Create centered rectangle + Gecentreerde rechthoek maken Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Maak een gecentreerde rechthoek in de schets @@ -1766,12 +1766,12 @@ als spiegelverwijzing. Remove axes alignment - Remove axes alignment + Uitlijning assen verwijderen Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Wijzigt de kaders om assen uitlijning te verwijderen terwijl u probeert de beperkende relatie van de selectie te behouden @@ -1991,7 +1991,7 @@ Dit zal de 'Support' eigenschap verwijderen, indien van toepassing. Splits an edge into two while preserving constraints - Splits an edge into two while preserving constraints + Splitst een rand in twee terwijl je de kaders behoudt @@ -2336,7 +2336,7 @@ ongeldige constraints, gedegenereerde geometrie, etc. Swap PointOnObject+tangency with point to curve tangency - Swap PointOnObject+tangency with point to curve tangency + Wissel PointOnObject+raaklijn om met punt op raaklijn van kromme @@ -2495,12 +2495,12 @@ ongeldige constraints, gedegenereerde geometrie, etc. Add centered sketch box - Add centered sketch box + Voeg gecentreerd schetsvak toe Add rounded rectangle - Add rounded rectangle + Afgeronde rechthoek toevoegen @@ -2653,7 +2653,7 @@ ongeldige constraints, gedegenereerde geometrie, etc. Remove Axes Alignment - Remove Axes Alignment + Verwijder assen uitlijning @@ -2662,7 +2662,9 @@ ongeldige constraints, gedegenereerde geometrie, etc. - + + + Update constraint's virtual space Update beperking's virtuele ruimte @@ -2672,12 +2674,12 @@ ongeldige constraints, gedegenereerde geometrie, etc. Voeg automatische beperkingen toe - + Swap constraint names Wissel de beperkingsnamen om - + Rename sketch constraint Hernoem schets beperking @@ -2745,42 +2747,42 @@ ongeldige constraints, gedegenereerde geometrie, etc. Niet in staat om het snijpunt van de bochten te raden. Probeer een samenvallende beperking toe te voegen tussen de vertexen van de curven die u wilt afronden. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Deze versie van OCE/OCC ondersteunt de knoopbewerking niet. U hebt 6.9.0 of hoger nodig. - + BSpline Geometry Index (GeoID) is out of bounds. B-spline Geometrie Index (GeoID) buiten bereik. - + You are requesting no change in knot multiplicity. U vraagt geen verandering in de knobbelmultipliciteit. - + The Geometry Index (GeoId) provided is not a B-spline curve. De Geometrie Index (Geold) aangeleverd is geen B-spline lijn. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. De knoop-index is buiten de grenzen. Merk op dat volgens de OCC-notatie de eerste knoop index 1 heeft en niet nul. - + The multiplicity cannot be increased beyond the degree of the B-spline. De veelvouds-getal mag niet groter zijn dan het aantal graden van de B-spline. - + The multiplicity cannot be decreased beyond zero. De multipliciteit kan niet lager zijn dan nul. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is niet in staat om de multipliciteit binnen de maximale tolerantie te verlagen. @@ -3894,12 +3896,12 @@ Geaccepteerde combinaties: twee curven; een eindpunt en een curve; twee eindpunt Wissel de beperkingsnamen om - + Unnamed constraint Onbenoemde beperking - + Only the names of named constraints can be swapped. Alleen de namen van de genoemde beperkingen kunnen omgewisseld worden. @@ -4425,7 +4427,7 @@ Hiervoor is het nodig om de bewerkingsmodus opnieuw in te schakelen. Constrained - Constrained + Beperkt @@ -4435,7 +4437,7 @@ Hiervoor is het nodig om de bewerkingsmodus opnieuw in te schakelen. Fully constrained Sketch - Fully constrained Sketch + Volledig ingeperkte schets @@ -4612,7 +4614,7 @@ Ondersteunt alle eenheidssystemen behalve de 'US customary' en VS/Euro-gebouwsys %N = %V - %N = %V + %N = %V @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4650,7 +4647,7 @@ Defaults to: %N = %V When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Wanneer u een schets opent, toon bronnen voor externe geometrische verbindingen. @@ -4904,11 +4901,6 @@ Er zijn echter geen beperkingen gevonden die verband houden met de eindpunten.All Alle - - - Normal - Normaal - Datums @@ -4924,34 +4916,192 @@ Er zijn echter geen beperkingen gevonden die verband houden met de eindpunten.Reference Referentie + + + Horizontal + Horizontaal + + Vertical + Verticaal + + + + Coincident + Samenvallend + + + + Point on Object + Point on Object + + + + Parallel + Evenwijdig + + + + Perpendicular + Loodrecht + + + + Tangent + Raaklijn + + + + Equality + Equality + + + + Symmetric + Symmetrisch + + + + Block + Blok + + + + Distance + Afstand + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Straal + + + + Weight + Gewicht + + + + Diameter + Diameter + + + + Angle + Hoek + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Aanzicht + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Alles tonen + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lijst + + + Internal alignments will be hidden Interne uitlijningen worden verborgen - + Hide internal alignment Verberg interne uitlijning - + Extended information will be added to the list Uitgebreide informatie wordt toegevoegd aan de lijst - + + Geometric + Geometric + + + Extended information Uitgebreide informatie - + Constraints Beperkingen - - + + + + + Error Fout @@ -5310,136 +5460,136 @@ De punten moeten dichter dan een vijfde van de rastergrootte bij een rasterlijn SketcherGui::ViewProviderSketch - + Edit sketch Schets bewerken - + A dialog is already open in the task panel Een dialoog is al geopend in het taakvenster - + Do you want to close this dialog? Wilt u dit dialoogvenster sluiten? - + Invalid sketch Ongeldige schets - + Do you want to open the sketch validation tool? Wilt u het schetsvalidatiegereedschap openen? - + The sketch is invalid and cannot be edited. De schets is ongeldig en kan niet worden bewerkt. - + Please remove the following constraint: Gelieve de volgende beperking te verwijderen: - + Please remove at least one of the following constraints: Gelieve minstens één van de volgende beperkingen te verwijderen: - + Please remove the following redundant constraint: Gelieve de volgende overbodige beperking te verwijderen: - + Please remove the following redundant constraints: Gelieve de volgende overbodige beperkingen te verwijderen: - + The following constraint is partially redundant: De volgende beperking is gedeeltelijk overbodig: - + The following constraints are partially redundant: De volgende beperkingen zijn gedeeltelijk overbodig: - + Please remove the following malformed constraint: Verwijder de volgende conflicterende beperking: - + Please remove the following malformed constraints: Verwijder de volgende conflicterende beperkingen: - + Empty sketch Lege schets - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (Klik om te selecteren) - + Fully constrained sketch Volledig beperkte schets - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Onderbeperkte schets met <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 graad</span></a> van vrijheid. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Onderbeperkte schets met <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graad</span></a> van vrijheid. %2 - + Solved in %1 sec Opgelost in %1 s - + Unsolved (%1 sec) Onopgelost (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm index b3e8377d53..58303b08df 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index b39d6a6989..bf1b1f9d63 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -1625,7 +1625,7 @@ w odniesieniu do linii lub trzeciego punktu Map sketch to face... - Mapuj szkic na powierzchnię... + Mapuj szkic na powierzchnię ... @@ -2004,7 +2004,7 @@ To usunie właściwość "podparcie", jeśli istnieje. Stop operation - Zatrzymaj operację + Przerwij operację @@ -2662,7 +2662,9 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. - + + + Update constraint's virtual space Aktualizuj wiązania przestrzeni wirtualnej @@ -2672,12 +2674,12 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Dodaj wiązania automatycznie - + Swap constraint names Zamień nazwy wiązań - + Rename sketch constraint Zmień nazwę wiązania szkicu @@ -2745,42 +2747,42 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Nie można ustalić punktu przecięcia się krzywych. Spróbuj dodać wiązanie zbieżne pomiędzy wierzchołkami krzywych, które zamierzasz zaokrąglić. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ta wersja OCE/OCC nie obsługuje operacji węzła. Potrzebujesz wersji 6.9.0 lub wyższej. - + BSpline Geometry Index (GeoID) is out of bounds. Indeks geometrii krzywej złożonej (GeoID) jest poza wiązaniem. - + You are requesting no change in knot multiplicity. Żądasz niezmienności w wielokrotności węzłów. - + The Geometry Index (GeoId) provided is not a B-spline curve. Podany indeks geometrii krzywej złożonej (GeoId) nie jest łukiem krzywej złożonej. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indeks węzłów jest poza wiązaniem. Zauważ, że zgodnie z zapisem OCC, pierwszy węzeł ma indeks 1, a nie zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. Wielokrotność nie może być zwiększona poza stopień krzywej złożonej - + The multiplicity cannot be decreased beyond zero. Wielokrotność nie może zostać zmniejszona poniżej zera. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC nie jest w stanie zmniejszyć wielokrotności w ramach maksymalnej tolerancji. @@ -3894,12 +3896,12 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Zamień nazwy wiązań - + Unnamed constraint Wiązanie bez przypisanej nazwy - + Only the names of named constraints can be swapped. Tylko nazwy wiązań z przypisaną nazwą mogą być zamienione. @@ -4565,52 +4567,52 @@ Obsługuje wszystkie systemy jednostek oprócz "zwyczajowego USA" i "budowlanego Font size used for labels and constraints. - Font size used for labels and constraints. + Rozmiar czcionki stosowany do etykiet i wiązań. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + Na podstawie tego współczynnika skalowany jest widok 3D. Line pattern used for grid lines. - Line pattern used for grid lines. + Styl linii używany dla linii siatki. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Liczba wielokątów użytych do wyznaczenia geometrii. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Zostanie wyświetlone okno dialogowe do wprowadzenia wartości nowych wiązań wymiarów. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + Pozostaw aktywne bieżące narzędzie do tworzenia szkiców. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + Pozostaw aktywne bieżące narzędzie do tworzenia wiązań. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Jeśli opcja jest zaznaczona, zostaną wyświetlone nazwy wiązań wymiarów (jeśli są zdefiniowane). Show dimensional constraint name with format - Show dimensional constraint name with format + Pokaż nazwę wiązania wymiaru w formacie %N = %V - %N = %V + %N = %V @@ -4619,21 +4621,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + Format prezentacji wiązań wymiarowych. +Domyślnie to: %N = %V -%N - name parameter -%V - dimension value +%N - parametr nazwy +%V - wartość wymiaru DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + Format tekstu wymiaru @@ -4643,22 +4640,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Podczas otwierania szkicu ukrywaj wszystkie cechy, od których jest on zależny. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Podczas otwierania szkicu, pokaż źródła powiązań geometrii zewnętrznej. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Podczas otwierania szkicu wyświetlane są obiekty, do których szkic jest dołączony. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Stosuje bieżące ustawienia opcji automatyzacji widoczności do wszystkich szkiców w otwartych dokumentach. @@ -4678,7 +4675,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Podczas zamykania szkicu ujęcie widoku zostanie cofnięte do miejsca, w którym znajdowało się przed otwarciem szkicu. @@ -4689,8 +4686,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Domyślnie otwórz szkic w widoku przekroju. +Widoczne będą obiekty tylko za płaszczyzną szkicu. @@ -4902,11 +4899,6 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. All Wszystkie - - - Normal - Normalny - Datums @@ -4922,34 +4914,192 @@ Nie znaleziono jednak żadnych wiązań z punktami końcowymi. Reference Odniesienie + + + Horizontal + Poziomo + + Vertical + Pionowo + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Równolegle + + + + Perpendicular + Prostopadle + + + + Tangent + Stycznie + + + + Equality + Equality + + + + Symmetric + Symetrycznie + + + + Block + Zablokuj + + + + Distance + Odległość + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Promień + + + + Weight + Grubość + + + + Diameter + Średnica + + + + Angle + Kąt + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Widok + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Wyświetl wszystko + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Wyrównania wewnętrzne zostaną ukryte - + Hide internal alignment Ukryj wewnętrzne wyrównanie - + Extended information will be added to the list Rozszerzone informacje zostaną dodane do listy - + + Geometric + Geometric + + + Extended information Informacje rozszerzone - + Constraints Wiązania - - + + + + + Error Błąd @@ -5308,136 +5458,136 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii SketcherGui::ViewProviderSketch - + Edit sketch Edycja szkicu - + A dialog is already open in the task panel Okno dialogowe jest już otwarte w panelu zadań - + Do you want to close this dialog? Czy chcesz zamknąć to okno dialogowe? - + Invalid sketch Nieprawidłowy szkic - + Do you want to open the sketch validation tool? Czy chcesz otworzyć narzędzie sprawdzania szkicu? - + The sketch is invalid and cannot be edited. Szkic jest nieprawidłowy i nie może być edytowany. - + Please remove the following constraint: Usuń następujące wiązania: - + Please remove at least one of the following constraints: Usuń co najmniej jedno z następujących wiązań: - + Please remove the following redundant constraint: Usuń następujący zbędny wiąz: - + Please remove the following redundant constraints: Usuń następujące zbędne wiązania: - + The following constraint is partially redundant: Następujące wiązanie jest częściowo zbędne: - + The following constraints are partially redundant: Następujące wiązania są częściowo zbędne: - + Please remove the following malformed constraint: Proszę usunąć następujące błędnie sformułowane wiązanie: - + Please remove the following malformed constraints: Proszę usunąć następujące błędnie sformułowane wiązania: - + Empty sketch Pusty szkic - + Over-constrained sketch Szkic ze zbyt dużą liczbą wiązań - + Sketch contains malformed constraints Szkic zawiera zniekształcone wiązania - + Sketch contains conflicting constraints Szkic zawiera wiązania powodujące konflikt - + Sketch contains redundant constraints Szkic zawiera nadmiarowe wiązania - + Sketch contains partially redundant constraints Szkic zawiera częściowo zbędne wiązania - - - - + + + + (click to select) (kliknij, aby wybrać) - + Fully constrained sketch Szkic jest w pełni związany - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Szkic nie jest w pełni związany, z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 stopniem</span></a> swobody - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Szkic nie jest w pełni związany, z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 stopniami</span></a> swobody - + Solved in %1 sec Rozwiązano w %1 sek - + Unsolved (%1 sec) Nie rozwiązano (%1 sek) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm index 396e239afd..a3c7f5123a 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index 06fcd0ea2c..543b70ab11 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -2662,7 +2662,9 @@ restrições inválidas, geometria corrompida, etc. - + + + Update constraint's virtual space Atualizar espaço virtual das restrições @@ -2672,12 +2674,12 @@ restrições inválidas, geometria corrompida, etc. Adicionar restrições automáticas - + Swap constraint names Trocar nomes de restrição - + Rename sketch constraint Renomear restrição do esboço @@ -2745,42 +2747,42 @@ restrições inválidas, geometria corrompida, etc. Não é possível adivinhar a intersecção das curvas. Tente adicionar uma restrição coincidente entre os vértices das curvas que você pretende filetar. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versão do OCE / OCC não suporta operação de nó. Você precisa de 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometria BSpline (GeoID) está fora dos limites. - + You are requesting no change in knot multiplicity. Você não solicitou nenhuma mudança de multiplicidade em nós. - + The Geometry Index (GeoId) provided is not a B-spline curve. O índice de geometria (GeoId) fornecida não é uma curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice do nó está fora dos limites. Note que, de acordo com a notação do OCC, o primeiro nó tem índice 1 e não zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade não pode ser aumentada além do grau de B-spline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade não pode ser diminuída abaixo de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. O OCC não consegue diminuir a multiplicidade dentro de tolerância máxima. @@ -3894,12 +3896,12 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Trocar nomes de restrição - + Unnamed constraint Restrição sem nome - + Only the names of named constraints can be swapped. Apenas os nomes das restrições nomeadas podem ser trocados. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.All Todos - - - Normal - Normal - Datums @@ -4924,34 +4916,192 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.Reference Referência + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paralelo + + + + Perpendicular + Perpendicular + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Simétrico + + + + Block + Bloquear + + + + Distance + Distância + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Raio + + + + Weight + Peso + + + + Diameter + Diâmetro + + + + Angle + Ângulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vista + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostrar tudo + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Os alinhamentos internos serão ocultos - + Hide internal alignment Ocultar alinhamento interno - + Extended information will be added to the list Informações adicionais serão acrescidas à lista - + + Geometric + Geometric + + + Extended information Informação adicional - + Constraints Restrições - - + + + + + Error Erro @@ -5310,136 +5460,136 @@ Os pontos devem ser mais próximos de um quinto do tamanho de grade para serem c SketcherGui::ViewProviderSketch - + Edit sketch Editar esboço - + A dialog is already open in the task panel Uma caixa de diálogo já está aberta no painel de tarefas - + Do you want to close this dialog? Deseja fechar este diálogo? - + Invalid sketch Esboço inválido - + Do you want to open the sketch validation tool? Você quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova as seguintes restrições redundantes: - + The following constraint is partially redundant: A restrição seguinte é parcialmente redundante: - + The following constraints are partially redundant: As restrições seguintes são parcialmente redundantes: - + Please remove the following malformed constraint: Por favor remova as seguintes restrições malformadas: - + Please remove the following malformed constraints: Por favor remova as seguintes restrições malformadas: - + Empty sketch Esboço vazio - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (clique para selecionar) - + Fully constrained sketch Esboço totalmente restrito - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Esboço sub-restrito com <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 grau</span></a> de liberdade. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Esboço sub-restrito com <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 graus</span></a> de liberdade. %2 - + Solved in %1 sec Resolvido em %1 seg - + Unsolved (%1 sec) Não resolvidos (%1 seg) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm index e1e2658ecc..571e1a4bef 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index 8a19588127..70de51cef3 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Trocar nomes da restrição - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Não é possível calcular a interseção das curvas. Tente adicionar uma restrição coincidente entre os vértices das curvas das quais pretende fazer a concordância. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Esta versão do OCE/OCC não suporta operações com nós. É necessária a versão 6.9.0 ou superior. - + BSpline Geometry Index (GeoID) is out of bounds. Índice de geometria BSpline (GeoID) está fora dos limites. - + You are requesting no change in knot multiplicity. Você não está a solicitar nenhuma mudança na multiplicidade de nó. - + The Geometry Index (GeoId) provided is not a B-spline curve. O índice de geometria (GeoId) fornecida não é uma curva B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. O índice do nó está fora dos limites. Note que, de acordo com a notação de OCC, o primeiro nó tem índice 1 e não zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. A multiplicidade não pode ser aumentada além do grau de B-spline. - + The multiplicity cannot be decreased beyond zero. A multiplicidade não pode ser diminuída, abaixo de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC é incapaz de diminuir a multiplicidade dentro de tolerância máxima. @@ -3894,12 +3896,12 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Trocar nomes da restrição - + Unnamed constraint Restrição sem nome - + Only the names of named constraints can be swapped. Apenas os nomes das restrições nomeadas podem ser trocados. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.All Tudo - - - Normal - Normal - Datums @@ -4924,34 +4916,192 @@ No entanto, nenhuma restrição foi encontrada nos pontos de extremidade.Reference Referência + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincidente + + + + Point on Object + Point on Object + + + + Parallel + Paralelo + + + + Perpendicular + Perpendicular + + + + Tangent + Tangente + + + + Equality + Equality + + + + Symmetric + Simétrica + + + + Block + Bloqueio + + + + Distance + Distância + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Raio + + + + Weight + Weight + + + + Diameter + Diâmetro + + + + Angle + Ângulo + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Ver + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostrar todos + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Erro @@ -5310,136 +5460,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Editar Esboço - + A dialog is already open in the task panel Já está aberta uma janela no painel de tarefas - + Do you want to close this dialog? Deseja fechar esta janela? - + Invalid sketch Esboço (sketch) inválido - + Do you want to open the sketch validation tool? Quer abrir a ferramenta de validação de esboço? - + The sketch is invalid and cannot be edited. O esboço é inválido e não pode ser editado. - + Please remove the following constraint: Por favor, remova a seguinte restrição: - + Please remove at least one of the following constraints: Por favor remova pelo menos uma das seguintes restrições: - + Please remove the following redundant constraint: Por favor, remova a seguinte restrição redundante: - + Please remove the following redundant constraints: Por favor, remova a seguinte restrição redundante: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Esboço vazio - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (clique para selecionar) - + Fully constrained sketch Esboço totalmente restrito - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Resolvido em %1 segundo - + Unsolved (%1 sec) Não resolvido (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm index dcd5f6fed4..0b33426098 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index b7b38ff15e..5a67e73bcc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Inversați numele constrângerilor - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Nu puteți ghici intersecția curbelor. Încercați să adăugați o constrângere de potrivire între vârfurile curbelor pe care intenționați să le completați. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Această versiune de OCE/OCC nu suportă operarea nodului. Ai nevoie de versiunea 6.9.0 sau mai recentă. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Nu cereți nicio schimbare în multiplicitatea nodului. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Indexul nod este în afara limitelor. Reţineţi că în conformitate cu notaţia OCC, primul nod are indexul 1 şi nu zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Multiplicitatea nu poate fi diminuată sub zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC este în imposibilitatea de a reduce multiplicarea în limitele toleranței maxime. @@ -3891,12 +3893,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Inversați numele constrângerilor - + Unnamed constraint Cosntrângere fără denumire - + Only the names of named constraints can be swapped. Numai numele constrângerilor denumite pot fi permutate între ele. @@ -4629,11 +4631,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4899,11 +4896,6 @@ However, no constraints linking to the endpoints were found. All Toate - - - Normal - Normal - Datums @@ -4919,34 +4911,192 @@ However, no constraints linking to the endpoints were found. Reference Referinţă + + + Horizontal + Horizontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paralel + + + + Perpendicular + Perpendicular + + + + Tangent + Tangenta + + + + Equality + Equality + + + + Symmetric + Simetrice + + + + Block + Bloc + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Raza + + + + Weight + Greutate + + + + Diameter + Diametru + + + + Angle + Unghi + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vizualizare + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Arată-le pe toate + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Listă + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error Eroare @@ -5305,136 +5455,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Editaţi schiţa - + A dialog is already open in the task panel O fereastră de dialog este deja deschisă în fereastra de sarcini - + Do you want to close this dialog? Doriţi să închideţi această fereastră de dialog? - + Invalid sketch Schiță nevalidă - + Do you want to open the sketch validation tool? Doriți să să deschideți scula de validare a schiței? - + The sketch is invalid and cannot be edited. Schița nu este validă și nu poate fi editată. - + Please remove the following constraint: Înlătură urmatoarea constrângere: - + Please remove at least one of the following constraints: Înlaturaţi cel puţin una din urmatoarele constrângeri: - + Please remove the following redundant constraint: Înlăturaţi urmatoarele constrângeri redundante: - + Please remove the following redundant constraints: Înlăturaţi urmatoarele constrângeri redundante: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Schita goala - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (apăsați pentru selectare) - + Fully constrained sketch Schita constranse in totalitate - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Rezolvare in %1 secunde - + Unsolved (%1 sec) Nerezolvata (%1 sec) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index 85119b35d0..c07df54fee 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index c8d651b5ff..c527bab748 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -47,12 +47,12 @@ Show/hide B-spline knot multiplicity - Показать/скрыть кратность узлов B-сплайна + Показать/скрыть кратность узлов B-сплайна Switches between showing and hiding the knot multiplicity for all B-splines - Переключение между Показать/Скрыть узлы для всех B-сплайнов + Переключение между отображением и сокрытием мультипликативных узлов для всех B-сплайнов @@ -65,7 +65,7 @@ Show/hide B-spline control point weight - Показть/Скрыть контрольную точку веса B-сплайна + Показать/скрыть контрольную точку веса B-сплайна @@ -175,12 +175,12 @@ Show/hide B-spline knot multiplicity - Показать/скрыть кратность узлов B-сплайна + Показать/скрыть кратность узлов B-сплайна Show/hide B-spline control point weight - Показть/Скрыть контрольную точку веса B-сплайна + Показать/скрыть контрольную точку веса B-сплайна @@ -259,7 +259,7 @@ End points and rim point - По конечным и касательной + По конечным и касательной точкам @@ -371,12 +371,12 @@ Sketch fillet - Эскиз кромки + Скругление Constraint-preserving sketch fillet - Constraint-preserving sketch fillet + Скругление с сохранением ограничений @@ -665,7 +665,7 @@ Constrain horizontally - Ограничить горизонтально + Ограничение горизонтальности @@ -739,7 +739,7 @@ on the selected vertex Constrain perpendicular - Ограничить перпендикулярность + Ограничение перпендикулярности @@ -958,7 +958,7 @@ with respect to a line or a third point Create arc by center - Создать дугу по центру + Создать дугу от центра @@ -1228,7 +1228,7 @@ with respect to a line or a third point Create pentagon - Начертить пятиугольник + Создать пятиугольник @@ -1282,7 +1282,7 @@ with respect to a line or a third point Create corner-preserving fillet - Create corner-preserving fillet + Создать скругление с сохранением точки пересечения @@ -1336,12 +1336,12 @@ with respect to a line or a third point Create centered rectangle - Создать прямоугольник по центру + Создать прямоугольник от центра Create a centered rectangle in the sketch - Создать прямоугольник по центру в эскизе + Создать прямоугольник от центра в эскизе @@ -1869,7 +1869,7 @@ This will clear the 'Support' property, if any. Select unconstrained DoF - Выбрать геометрию имеющую неограниченные степени свободы + Выделить геометрию имеющую неограниченные степени свободы @@ -1938,7 +1938,7 @@ This will clear the 'Support' property, if any. Select partially redundant constraints - Выбрать частично избыточные ограничения + Выделить частично избыточные ограничения @@ -1952,7 +1952,7 @@ This will clear the 'Support' property, if any. Select redundant constraints - Выбрать избыточные ограничения + Выделить избыточные ограничения @@ -2091,14 +2091,13 @@ This will clear the 'Support' property, if any. Toggle driving/reference constraint - Toggle driving/reference constraint + Переключить ограничения в построительные/основные Set the toolbar, or the selected constraints, into driving or reference mode - Set the toolbar, or the selected constraints, -into driving or reference mode + Переключает панель инструментов или преобразует выбранные ограничения, в режим построительной/основной геометрии @@ -2432,7 +2431,7 @@ invalid constraints, degenerated geometry, etc. Toggle constraint to driving/reference - Toggle constraint to driving/reference + Переключить ограничения в построительные/основные @@ -2580,7 +2579,7 @@ invalid constraints, degenerated geometry, etc. Add carbon copy - Add carbon copy + Добавить копию @@ -2659,7 +2658,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2669,12 +2670,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Изменить имена ограничений - + Rename sketch constraint Rename sketch constraint @@ -2742,42 +2743,42 @@ invalid constraints, degenerated geometry, etc. Не удалось рассчитать пересечение кривых. Попробуйте добавить ограничение совпадения между вершинами кривых, которые вы намерены скруглить. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Эта версия OCE / OCC не поддерживает операции с узлами. Требуется версия 6.9.0 или выше. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline идентификатор геометрии (GeoID) находится вне границ. - + You are requesting no change in knot multiplicity. Вы не запрашиваете никаких изменений в множественности узлов. - + The Geometry Index (GeoId) provided is not a B-spline curve. Идентификатор геометрии (GeoId) не является B-сплайн кривой. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Индекс узла выходит за границы. Обратите внимание, что в соответствии с нотацией OCC первый узел имеет индекс 1, а не ноль. - + The multiplicity cannot be increased beyond the degree of the B-spline. Кратность не может быть увеличена сверх степени B-сплайна. - + The multiplicity cannot be decreased beyond zero. Кратность не может быть уменьшена ниже нуля. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC неспособен уменьшить кратность в пределах максимального допуска. @@ -3484,13 +3485,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two edges from the sketch. - Выберите две кромки эскиза. + Выберите два ребра в эскизе. Select two or more compatible edges - Выделите два или более элементов. Можно выбрать либо набор линий, либо набор окружностей и их дуг, либо набор эллипсов и их дуг. + Выберите две или более совместимые грани @@ -3798,7 +3799,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Carbon copy would cause a circular dependency. - Точная копия вызывает круговую зависимость. + Копирование приведет к циклической зависимости. @@ -3823,7 +3824,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - Выбранный эскиз не параллелен этому эскизу. Удерживайте Ctrl+Alt, чтобы разрешить непараллельные эскизы. + Выбранный эскиз не параллелен этому эскизу. Удерживайте Ctrl+Alt, чтобы иметь возможность создавать непараллельные эскизы. @@ -3889,12 +3890,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Изменить имена ограничений - + Unnamed constraint Неименованные ограничения - + Only the names of named constraints can be swapped. Только имена именованных ограничений могут быть заменены. @@ -4624,11 +4625,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4896,11 +4892,6 @@ However, no constraints linking to the endpoints were found. All Все - - - Normal - Обычные - Datums @@ -4916,34 +4907,192 @@ However, no constraints linking to the endpoints were found. Reference Ссылка + + + Horizontal + По горизонтали + + Vertical + По вертикали + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Параллельно + + + + Perpendicular + Перпендикулярно + + + + Tangent + Касательная + + + + Equality + Equality + + + + Symmetric + Симметрично + + + + Block + Блок + + + + Distance + Расстояние + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Радиус + + + + Weight + Толщина + + + + Diameter + Диаметр + + + + Angle + Угол + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Вид + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Показать Все + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Список + + + Internal alignments will be hidden Внутренние выравнивания будут скрыты - + Hide internal alignment Скрыть внутреннее выравнивание - + Extended information will be added to the list Расширенная информация будет добавлена в список - + + Geometric + Geometric + + + Extended information Расширенная информация - + Constraints Ограничения - - + + + + + Error Ошибки @@ -5302,136 +5451,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Редактировать эскиз - + A dialog is already open in the task panel Диалог уже открыт в панели задач - + Do you want to close this dialog? Вы хотите закрыть этот диалог? - + Invalid sketch Эскиз повреждён - + Do you want to open the sketch validation tool? Открыть инструмент проверки наброска? - + The sketch is invalid and cannot be edited. Эскиз содержит ошибки и не может быть изменен. - + Please remove the following constraint: Пожалуйста, удалите следующие ограничения: - + Please remove at least one of the following constraints: Пожалуйста, удалите по крайней мере одно из следующих ограничений: - + Please remove the following redundant constraint: Пожалуйста, удалите следующие избыточные ограничения: - + Please remove the following redundant constraints: Пожалуйста, удалите следующие избыточные ограничения: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Эскиз не содержащий элементов - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (выделить) - + Fully constrained sketch Эскиз не содержит степеней свободы - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Эскиз ограничен не полностью и имеет <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 степень</span></a> свободы. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Эскиз ограничен не полностью и имеет <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 степени(ей)</span></a> свободы. %2 - + Solved in %1 sec Обсчитан за %1 сек - + Unsolved (%1 sec) Не решается (%1 сек) @@ -5478,7 +5627,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Switches between showing and hiding the knot multiplicity for all B-splines - Переключение между Показать/Скрыть узлы для всех B-сплайнов + Переключение между отображением и сокрытием мультипликативных узлов для всех B-сплайнов @@ -5670,7 +5819,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Creates a radius between two lines - Creates a radius between two lines + Создает скругление между двумя линиями @@ -5729,7 +5878,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Fillet that preserves constraints and intersection point - Fillet that preserves constraints and intersection point + Скругление с сохранением ограничений и точки пересечения @@ -6261,7 +6410,7 @@ to determine whether a solution converges or not Sketcher B-spline tools - Sketcher B-spline tools + B-сплйан инструменты эскиза diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm index 3f2cfe203a..dc6c674a71 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index 53b3bc701d..0585130c90 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -2660,7 +2660,9 @@ neveljavna omejila, izrojene geometrije, ... - + + + Update constraint's virtual space Posodobi navidezni prostor omejila @@ -2670,12 +2672,12 @@ neveljavna omejila, izrojene geometrije, ... Dodaj samodejna omejila - + Swap constraint names Zamenjaj imeni omejil - + Rename sketch constraint Preimenuj očrtno omejilo @@ -2743,42 +2745,42 @@ neveljavna omejila, izrojene geometrije, ... Ni mogoče uganiti presečišča krivulj. Poskusite dodati omejilo sovpadanja med vozlišči krivulj, ki jih nameravate zaokrožiti. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Ta različica OCE/OCC ne podpira dela z vozli. Potrebuješ različico 6.9.0 ali višjo. - + BSpline Geometry Index (GeoID) is out of bounds. Kazalo geometrije B-zlepka (GeoID) je izven omejitev. - + You are requesting no change in knot multiplicity. Ne zahtevate spremembe večkratnosti vozla. - + The Geometry Index (GeoId) provided is not a B-spline curve. Priskrbljeno kazalo geometrije (GeoId) ni krivulja B-zlepek. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Oznaka vozla je izven meja. Upoštevajte, da ima v skladu z OCC zapisom prvi vozel oznako 1 in ne nič. - + The multiplicity cannot be increased beyond the degree of the B-spline. Večkratnost ne more biti povečana preko stopnje B-zlepka. - + The multiplicity cannot be decreased beyond zero. Večkratnost ne more biti zmanjšana pod ničlo. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC ne more zmanjšati večkratnost znotraj največjega dopustnega odstopanja. @@ -3892,12 +3894,12 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Zamenjaj imeni omejil - + Unnamed constraint Neimenovana omejilo - + Only the names of named constraints can be swapped. Zamenjati je mogoče le imena poimenovanih omejil. @@ -4564,52 +4566,52 @@ Podprti so vsi merski sistemi razen "Ameriškega merskega sistema" in "Gradbeni Font size used for labels and constraints. - Font size used for labels and constraints. + Velikost pisave za oznake in omejila. The 3D view is scaled based on this factor. - The 3D view is scaled based on this factor. + 3D pogled je prevelikosten na podlagi tega količnika. Line pattern used for grid lines. - Line pattern used for grid lines. + Črtni vzorec za mrežne črte. The number of polygons used for geometry approximation. - The number of polygons used for geometry approximation. + Število mnogokotnikov za približek geometriji. A dialog will pop up to input a value for new dimensional constraints. - A dialog will pop up to input a value for new dimensional constraints. + Pojavilo se bo pogovorno okno, v katerega vnesete vrednost novega merskega omejila. The current sketcher creation tool will remain active after creation. - The current sketcher creation tool will remain active after creation. + Trenutno orodje za očrtovanje bo po končanem dejanju ostalo dejavno. The current constraint creation tool will remain active after creation. - The current constraint creation tool will remain active after creation. + Trenutni ustvarjalnik omejil bo po ustvaritvi ostajl dejaven. If checked, displays the name on dimensional constraints (if exists). - If checked, displays the name on dimensional constraints (if exists). + Če je označeno, bo na merskem omejilu prikazano ime (če to obstaja). Show dimensional constraint name with format - Show dimensional constraint name with format + Skupaj z obliko zapisa prikaži ime merskega omejila %N = %V - %N = %V + %N = %V @@ -4618,21 +4620,16 @@ Defaults to: %N = %V %N - name parameter %V - dimension value - The format of the dimensional constraint string presentation. -Defaults to: %N = %V + Oblika zapisa merskega omejila. +Privzeto: %N = %V -%N - name parameter -%V - dimension value +%N - ime določilke +%V - vrednost velikosti DimensionalStringFormat - DimensionalStringFormat - - - - Mod/Sketcher - Mod/Sketcher + OblikaZapisaMere @@ -4642,22 +4639,22 @@ Defaults to: %N = %V When opening a sketch, hide all features that depend on it. - When opening a sketch, hide all features that depend on it. + Pri odpiranju očrta skrij vse značilnosti, ki so od njega odvisne. When opening a sketch, show sources for external geometry links. - When opening a sketch, show sources for external geometry links. + Ob odpiranju skice, prikaži vire za povezave zunanje geometrije. When opening a sketch, show objects the sketch is attached to. - When opening a sketch, show objects the sketch is attached to. + Pri odpiranju očrta prikaži predmete, na katere je očrt vezan. Applies current visibility automation settings to all sketches in open documents. - Applies current visibility automation settings to all sketches in open documents. + Uveljavi v vseh očrtih odprtih dokumentov trenutne nastavitve samodejnosti za vidnost. @@ -4677,7 +4674,7 @@ Defaults to: %N = %V When closing a sketch, move camera back to where it was before the sketch was opened. - When closing a sketch, move camera back to where it was before the sketch was opened. + Pri zapiranju očrta vrni kamero na mesto pred odprtjem očrta. @@ -4688,8 +4685,8 @@ Defaults to: %N = %V Open a sketch in Section View mode by default. Then objects are only visible behind the sketch plane. - Open a sketch in Section View mode by default. -Then objects are only visible behind the sketch plane. + Privzeto odpri očrt v načinu prereznega pogleda. +V tem primeru je predmete mogoče videti le za očrtno ravnino. @@ -4899,11 +4896,6 @@ However, no constraints linking to the endpoints were found. All Vse - - - Normal - Običajno - Datums @@ -4919,34 +4911,193 @@ However, no constraints linking to the endpoints were found. Reference Osnova + + + Horizontal + Vodoravno + + Vertical + Navpično + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Vzporedno + + + + Perpendicular + Pravokoten + + + + Tangent + Dotikalnica + + + + Equality + Equality + + + + Symmetric + Somerno + + + + Block + Zbir (skupina predmetov), Klada (velik kos gradiva), Blok (večja srednjevisoka stavba) +Zaustavljati, Zapirati (pot), Zastirati (svetlobo, pogled) + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Polmer + + + + Weight + Debelina + + + + Diameter + Premer + + + + Angle + Kot + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Pogled + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Prikaži vse + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Seznam + + + Internal alignments will be hidden Notranje poravnave bodo skrite - + Hide internal alignment Skrij notranjo poravnavo - + Extended information will be added to the list Na seznam bodo dodani podrobnajši podatki - + + Geometric + Geometric + + + Extended information Podrobnejši podatki - + Constraints Constraints - - + + + + + Error Napaka @@ -5305,136 +5456,136 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Neveljaven očrt - + Do you want to open the sketch validation tool? Ali želite odprti orodje za preverjanje veljavnosti očrta? - + The sketch is invalid and cannot be edited. Očrt je neveljaven in ga ni mogoče urejati. - + Please remove the following constraint: Odstranite naslednjo omejilo: - + Please remove at least one of the following constraints: Odstranite vsaj eno od naslednjih omejil: - + Please remove the following redundant constraint: Odstranite naslednje čezmerno omejilo: - + Please remove the following redundant constraints: Odstranite naslednja čezmerna omejila: - + The following constraint is partially redundant: Naslednje omejilo je deloma čezmerno: - + The following constraints are partially redundant: Naslednja omejila so deloma čezmerna: - + Please remove the following malformed constraint: Odstranite naslednje narobe oblikovano omejilo: - + Please remove the following malformed constraints: Odstranite naslednja narobe oblikovana omejila: - + Empty sketch Prazen očrt - + Over-constrained sketch Očrt s preveč omejili - + Sketch contains malformed constraints Očrt vsebuje narobe oblikovana omejila - + Sketch contains conflicting constraints Očrt vsebuje omejila v sporu - + Sketch contains redundant constraints Očrt vsebuje čezmerna omejila - + Sketch contains partially redundant constraints Očrt vsebuje deloma čezmerna omejila - - - - + + + + (click to select) (kliknite za izbiro) - + Fully constrained sketch Popolnoma omejen očrt - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Podomejen očrt z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 </span></a> prostostno stopnjo. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Podomejen očrt z <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 </span></a> prostostnimi stopnjami. %2 - + Solved in %1 sec Rešeno v %1 s - + Unsolved (%1 sec) Ni rešeno (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm index 3fe470b31d..6c55702706 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index b0d0ed7370..889fc26707 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Kasta om namn på begränsningar - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Kan inte finna skärning mellan kurvorna. Försök att lägga till en sammanfallande-begränsning mellan ändpunkterna på kurvorna du vill avrunda. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Denna version av OCE/OCC stöder inte knutfunktioner. Version 6.9.0 eller högre krävs. - + BSpline Geometry Index (GeoID) is out of bounds. B-spline-geometriindex (GeoID) är inte giltigt. - + You are requesting no change in knot multiplicity. Du efterfrågar ingen ändring i knutmultipliciteten. - + The Geometry Index (GeoId) provided is not a B-spline curve. Geometriindex (GeoId) som är angivet är inte en B-spline-kurva. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Knutindex är inte giltigt. Notera att i enlighet med OCC-notation så har första knuten index 1 och inte index 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. Multipliciteten kan inte ökas mer än graden av B-spline:n. - + The multiplicity cannot be decreased beyond zero. Multipliciteten kan inte minskas under 0. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC kan inte minsta multipliciteten inom den maximala toleransen. @@ -3894,12 +3896,12 @@ Accepterade kombinationer: två kurvor; en slutpunkt och en kurva; två slutpunk Kasta om namn på begränsningar - + Unnamed constraint Namnlös begränsning - + Only the names of named constraints can be swapped. Bara namnen hos namngivna begränsningar kan kastas om. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ Inga begränsningar länkade till slutpunkterna hittades däremot. All Alla - - - Normal - Normal - Datums @@ -4924,34 +4916,192 @@ Inga begränsningar länkade till slutpunkterna hittades däremot. Reference Referens + + + Horizontal + Horisontell + + Vertical + Lodrät + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Parallell + + + + Perpendicular + Vinkelrät + + + + Tangent + Tangens + + + + Equality + Equality + + + + Symmetric + Symmetrisk + + + + Block + Block + + + + Distance + Distans + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radie + + + + Weight + Tjocklek + + + + Diameter + Diameter + + + + Angle + Vinkel + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Vy + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Visa alla + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Lista + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Utökad information läggs till i listan - + + Geometric + Geometric + + + Extended information Utökad information - + Constraints Begränsningar - - + + + + + Error Fel @@ -5310,136 +5460,136 @@ Punkter måste placeras mindre än en femtedels ruta från en linje för att fä SketcherGui::ViewProviderSketch - + Edit sketch Redigera skiss - + A dialog is already open in the task panel En dialogruta är redan öppen i uppgiftspanelen - + Do you want to close this dialog? Vill du stänga denna dialogruta? - + Invalid sketch Ogiltig skiss - + Do you want to open the sketch validation tool? Vill du öppna verktyget för skissvalidering? - + The sketch is invalid and cannot be edited. Skissen är ogiltig och kan inte redigeras. - + Please remove the following constraint: Ta bort följande begränsning: - + Please remove at least one of the following constraints: Ta bort minst en av följande begränsningar: - + Please remove the following redundant constraint: Ta bort följande redundanta begränsningen: - + Please remove the following redundant constraints: Ta bort följande redundanta begränsningarna: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Tom skiss - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (Klicka för att välja) - + Fully constrained sketch Helt begränsad skiss - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Löst i %1 SEK - + Unsolved (%1 sec) Olöst (%1 SEK) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm index 580a3e1716..70eaa4ffa7 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index d7989c64be..4936619785 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -2656,7 +2656,9 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. - + + + Update constraint's virtual space Kısıtlamanın sanal alanını güncelleyin @@ -2666,12 +2668,12 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Otomatik kısıtlamalar ekleyin - + Swap constraint names Kısıtlama adlarını değiştirin - + Rename sketch constraint Eskiz kısıtlamasını yeniden adlandır @@ -2739,42 +2741,42 @@ bozulmuş geometriye vb. bakarak bir eskizi doğrulayın. Eğrilerin kesişimini tahmin edemiyoruz. Dilimlemeyi planladığınız eğrilerin köşeleri arasında çakışan bir kısıtlama eklemeyi deneyin. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. OCE/OCC'NİN bu sürümü düğüm işlemini desteklemez. 6.9.0 veya daha yüksek gerekir. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometri Dizini (GeoID) sınırların dışında. - + You are requesting no change in knot multiplicity. Düğüm çokluğunda herhangi bir değişiklik istemiyorsunuz. - + The Geometry Index (GeoId) provided is not a B-spline curve. Sağlanan Geometri Dizini (GeoId) bir B-spline eğrisi değil. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Düğüm endeksi sınırların dışındadır. OCC gösterimine göre, ilk düğümün indeks 1'i olduğunu ve sıfır olmadığını unutmayın. - + The multiplicity cannot be increased beyond the degree of the B-spline. Çeşitlilik, B-spline'nın derecesinin ötesinde artırılamaz. - + The multiplicity cannot be decreased beyond zero. Çokluk sıfırdan aşağıya düşürülemez. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC, maksimum tolerans dahilinde çokluğu azaltamıyor. @@ -3888,12 +3890,12 @@ Kabul edilen kombinasyonlar: iki eğri; bir son nokta ve bir eğri; iki uç nokt Kısıtlama adlarını değiştirin - + Unnamed constraint Adsız kısıtlama - + Only the names of named constraints can be swapped. Yalnızca adlandırılmış kısıtlamaların adları değiştirilebilir. @@ -4622,11 +4624,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4894,11 +4891,6 @@ Ancak, uç noktalara bağlanan hiçbir kısıtlama bulunamadı. All Hepsi - - - Normal - Olağan - Datums @@ -4914,34 +4906,192 @@ Ancak, uç noktalara bağlanan hiçbir kısıtlama bulunamadı. Reference Referans + + + Horizontal + Yatay + + Vertical + Dikey + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Koşut + + + + Perpendicular + Dik + + + + Tangent + Teğet + + + + Equality + Equality + + + + Symmetric + Simetrik + + + + Block + Blok + + + + Distance + Uzaklık + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Yarıçap + + + + Weight + Ağırlık + + + + Diameter + Çap + + + + Angle + Açı + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Görünüm + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Tümünü Göster + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Liste + + + Internal alignments will be hidden İç hizalamalar gizlenecek - + Hide internal alignment İç hizalamayı gizle - + Extended information will be added to the list Detaylı bilgi listeye eklenecek - + + Geometric + Geometric + + + Extended information Detaylı bilgi - + Constraints Constraints - - + + + + + Error Hata @@ -5300,136 +5450,136 @@ Noktalar ızgara çizgisine, ızgara ölçüsünün beşte birinden yakın ayarl SketcherGui::ViewProviderSketch - + Edit sketch Taslağı düzenle - + A dialog is already open in the task panel Araç çubuğunda bir pencere zaten açık - + Do you want to close this dialog? Bu pencereyi kapatmak ister misiniz? - + Invalid sketch Geçersiz eskiz - + Do you want to open the sketch validation tool? Eskiz doğrulama aracını açmak istiyor musunuz? - + The sketch is invalid and cannot be edited. Eskiz geçersizdir ve düzenlenemez. - + Please remove the following constraint: Lütfen aşağıdaki kısıtlamayı kaldırın: - + Please remove at least one of the following constraints: Lütfen aşağıdaki kısıtlamalardan en az birini kaldırın: - + Please remove the following redundant constraint: Lütfen aşağıdaki gereksiz kısıtlamayı kaldırın: - + Please remove the following redundant constraints: Lütfen aşağıdaki gereksiz kısıtlamaları kaldırın: - + The following constraint is partially redundant: Aşağıdaki kısıtlama kısmen gereksizdir: - + The following constraints are partially redundant: Aşağıdaki kısıtlamalar kısmen gereksizdir: - + Please remove the following malformed constraint: Lütfen aşağıdaki hatalı biçimlendirilmiş kısıtlamayı kaldırın: - + Please remove the following malformed constraints: Lütfen aşağıdaki hatalı biçimlendirilmiş kısıtlamaları kaldırın: - + Empty sketch Boş eskiz - + Over-constrained sketch Aşırı kısıtlanmış eskiz - + Sketch contains malformed constraints Eskiz, hatalı biçimlendirilmiş kısıtlamalar içeriyor - + Sketch contains conflicting constraints Eskiz çakışan kısıtlamaları içeriyor - + Sketch contains redundant constraints Eskiz, gereksiz kısıtlamaları içeriyor - + Sketch contains partially redundant constraints Eskiz, kısmen gereksiz kısıtlamalar içeriyor - - - - + + + + (click to select) (seçmek için tıkla) - + Fully constrained sketch Tamamen kısıtlanmış eskiz - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 derece</span></a> serbestlik ile yetersiz kısıtlanmış eskiz. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 derece</span></a> serbestlik ile yetersiz kısıtlanmış eskiz. %2 - + Solved in %1 sec %1 saniye içinde çözüldü - + Unsolved (%1 sec) Çözülmemiş (%1 sn.) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm index d116b02de1..9700699e81 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index f13c0b772d..f7114af59d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Swap constraint names - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -3894,12 +3896,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Swap constraint names - + Unnamed constraint Обмеження без імені - + Only the names of named constraints can be swapped. Only the names of named constraints can be swapped. @@ -4632,11 +4634,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4904,11 +4901,6 @@ However, no constraints linking to the endpoints were found. All Все - - - Normal - Звичайне - Datums @@ -4924,34 +4916,192 @@ However, no constraints linking to the endpoints were found. Reference Посилання + + + Horizontal + По горизонталі + + Vertical + По вертикалі + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Паралельно + + + + Perpendicular + Perpendicular + + + + Tangent + Дотичний + + + + Equality + Equality + + + + Symmetric + Симетрично + + + + Block + Блок + + + + Distance + Відстань + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Радіус + + + + Weight + Weight + + + + Diameter + Діаметр + + + + Angle + Кут + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Вигляд + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Показати усе + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Список + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Обмеження - - + + + + + Error Помилка @@ -5310,136 +5460,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Редагувати ескіз - + A dialog is already open in the task panel Діалогове вікно вже відкрито в панелі задач - + Do you want to close this dialog? Ви бажаєте закрити це діалогове вікно? - + Invalid sketch Неприпустимий ескіз - + Do you want to open the sketch validation tool? Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. The sketch is invalid and cannot be edited. - + Please remove the following constraint: Будь ласка, видаліть наступне обмеження: - + Please remove at least one of the following constraints: Будь ласка, видаліть принаймні одне з таких обмежень: - + Please remove the following redundant constraint: Будь ласка, видаліть наступне надлишкове обмеження: - + Please remove the following redundant constraints: Видаліть, будь ласка, наступні надлишкові обмеження: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch Порожній ескіз - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (натисніть, щоб вибрати) - + Fully constrained sketch Ескіз повністю визначений - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Обраховано за %1 с - + Unsolved (%1 sec) Не обраховано (%1 с) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm index c245261653..c612792de6 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts index 58c6b3fc48..902d3e5f2a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_val-ES.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names Intercanvia els noms de restricció - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. No s'ha trobat la intersecció de les corbes. Intenteu afegir una restricció coincident entre els vèrtexs de les corbes que esteu intentant arrodonir. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Aquesta versió d' OCE/OCC no permet operacions de nus. Necessiteu 6.9.0 o posteriors. - + BSpline Geometry Index (GeoID) is out of bounds. L'índex de geometria BSpline (GeoID) està fora de les restriccions. - + You are requesting no change in knot multiplicity. Se us ha demanat que no canvieu la multiplicitat del nus. - + The Geometry Index (GeoId) provided is not a B-spline curve. L'índex de geometria (GeoId) proporcionat no és una corba de B-spline. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. L'índex del nus és fora dels límits. Tingueu en compte que d'acord amb la notació d'OCC, el primer nus té l'índex 1 i no zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. La multiplicitat no es pot augmentar més enllà del grau del B-spline. - + The multiplicity cannot be decreased beyond zero. La multiplicitat no es pot reduir més enllà de zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC no pot reduir la multiplicitat dins de la tolerància màxima. @@ -3890,12 +3892,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Intercanvia els noms de restricció - + Unnamed constraint Restricció sense nom - + Only the names of named constraints can be swapped. Només es poden intercanviar els noms de les restriccions anomenades. @@ -4621,11 +4623,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4887,11 +4884,6 @@ However, no constraints linking to the endpoints were found. All Tot - - - Normal - Normal - Datums @@ -4907,34 +4899,192 @@ However, no constraints linking to the endpoints were found. Reference Ref + + + Horizontal + Horitzontal + + Vertical + Vertical + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Paral·lel + + + + Perpendicular + Perpendicular + + + + Tangent + Tangent + + + + Equality + Equality + + + + Symmetric + Simètric + + + + Block + Block + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Radi + + + + Weight + Pes + + + + Diameter + Diàmetre + + + + Angle + Angle + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Visualitza + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Mostra-ho tot + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Llista + + + Internal alignments will be hidden Les alineacions internes s'ocultaran - + Hide internal alignment Oculta l'alineació interna - + Extended information will be added to the list La informació ampliada s'afegirà a la llista - + + Geometric + Geometric + + + Extended information Informació ampliada - + Constraints Constraints - - + + + + + Error Error @@ -5293,136 +5443,136 @@ Els punts s’han d’establir més a prop que una cinquena part de la mida de l SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch L'esbós no és vàlid. - + Do you want to open the sketch validation tool? Voleu obrir l'eina de validació d'esbossos? - + The sketch is invalid and cannot be edited. L'esbós no és vàlid i no es pot editar. - + Please remove the following constraint: Suprimiu la restricció següent: - + Please remove at least one of the following constraints: Suprimiu almenys una de les restriccions següents: - + Please remove the following redundant constraint: Suprimiu la restricció redundant següent: - + Please remove the following redundant constraints: Suprimiu les restriccions redundants següents: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch L'esbós és buit. - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (feu clic per a seleccionar) - + Fully constrained sketch Esbós completament restringit - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Solucionat en %1 s - + Unsolved (%1 sec) Sense solucionar (%1 s) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm index e58cdc13da..86d1339d46 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts index a16733d310..5f724ce0e0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_vi.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Cập nhật không gian ảo của ràng buộc @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Thêm các ràng buộc tự động - + Swap constraint names Trao đổi tên các ràng buộc - + Rename sketch constraint Đổi tên ràng buộc sketch @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. Phiên bản OCE / OCC này không hỗ trợ thao tác nút. Bạn cần tải phiên bản 6.9.0 hoặc cao hơn. - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. Bạn đang yêu cầu không có sự thay đổi trong bội số nút. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. Chỉ số nút là ngoài vùng biên giới. Lưu ý rằng theo ký hiệu OCC, nút đầu tiên có chỉ số là 1 và không bằng 0. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. Bội số không thể được giảm quá số không. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC không thể làm giảm bội số trong dung sai tối đa. @@ -3894,12 +3896,12 @@ Các tổ hợp được chấp nhận: hai đường cong; một điểm cuối Trao đổi tên các ràng buộc - + Unnamed constraint Ràng buộc không tên - + Only the names of named constraints can be swapped. Chỉ có tên của các ràng buộc được trao đổi. @@ -4630,11 +4632,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4902,11 +4899,6 @@ Tuy nhiên, không có tìm thấy ràng buộc nào liên kết với các đi All Tất cả - - - Normal - Bình thường - Datums @@ -4922,34 +4914,192 @@ Tuy nhiên, không có tìm thấy ràng buộc nào liên kết với các đi Reference Tham chiếu + + + Horizontal + Nằm ngang + + Vertical + Nằm dọc + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + Song song + + + + Perpendicular + Vuông góc + + + + Tangent + Đường tiếp tuyến + + + + Equality + Equality + + + + Symmetric + Đối xứng + + + + Block + Khối + + + + Distance + Distance + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + Bán kính + + + + Weight + Weight + + + + Diameter + Đường kính + + + + Angle + Góc + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + Chế độ xem + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + Hiển thị tất cả + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + Danh sách + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Thông tin mở rộng - + Constraints Constraints - - + + + + + Error Lỗi @@ -5308,136 +5458,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch Edit sketch - + A dialog is already open in the task panel A dialog is already open in the task panel - + Do you want to close this dialog? Do you want to close this dialog? - + Invalid sketch Bản phác họa không hợp lệ - + Do you want to open the sketch validation tool? Bạn có muốn mở công cụ xác thực bản phác họa? - + The sketch is invalid and cannot be edited. Bản phác họa không hợp lệ và không thể bị chỉnh sửa. - + Please remove the following constraint: Hãy loại bỏ những liên kết sau: - + Please remove at least one of the following constraints: Hãy loại bỏ ít nhất một trong những liên kết sau đây: - + Please remove the following redundant constraint: Hãy loại bỏ liên kết thừa sau đây: - + Please remove the following redundant constraints: Hãy loại bỏ các liên kết thừa sau đây: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Hãy loại bỏ ràng buộc sai dạng sau đây: - + Please remove the following malformed constraints: Hãy loại bỏ các ràng buộc sai dạng sau đây: - + Empty sketch Bản phác họa trống - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (nhấp chuột để chọn) - + Fully constrained sketch Bản phác thảo đã được ràng buộc hoàn toàn - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec Được xử lý trong %1 giây - + Unsolved (%1 sec) Chưa được xử lý (%1 giây) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm index a68d24907e..97ae61ae6c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index c8c6a3bc51..1d8cfbe591 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names 替换约束名 - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. 无法猜测曲线的交叉点。尝试在你打算做圆角的曲线顶点之间添加一个重合约束。 - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. 此版本的OCE/OCC 不支持节点操作。你需要6.9.0 或更高版本. - + BSpline Geometry Index (GeoID) is out of bounds. 贝赛尔样条几何图形索引(GeoID) 超出了界限。 - + You are requesting no change in knot multiplicity. 你被要求不对多重性节点做任何修改。 - + The Geometry Index (GeoId) provided is not a B-spline curve. 提供的几何图形索引 (GeoId) 不是贝赛尔样条曲线 - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. 结指数超出界限。请注意, 按照 OCC 符号, 第一个节点的索引为1, 而不是0。 - + The multiplicity cannot be increased beyond the degree of the B-spline. 多重性无法增加到超过B样条的自由度。 - + The multiplicity cannot be decreased beyond zero. 多重性不能小于0. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC 无法在最大公差范围内减少多重性。 @@ -3894,12 +3896,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 替换约束名 - + Unnamed constraint 未命名约束 - + Only the names of named constraints can be swapped. 只有已命名约束名称可被替换。 @@ -4629,11 +4631,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4901,11 +4898,6 @@ However, no constraints linking to the endpoints were found. All 全部 - - - Normal - 法向 - Datums @@ -4921,34 +4913,192 @@ However, no constraints linking to the endpoints were found. Reference 参考 + + + Horizontal + 水平 + + Vertical + 垂直 + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + 平行 + + + + Perpendicular + Perpendicular + + + + Tangent + 相切 + + + + Equality + Equality + + + + Symmetric + 对称 + + + + Block + 块 + + + + Distance + 距离 + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + 半径 + + + + Weight + 重量 + + + + Diameter + 直径 + + + + Angle + 角度 + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + 视图 + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + 显示全部 + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + 列表 + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints 约束 - - + + + + + Error 错误 @@ -5307,136 +5457,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch 编辑草绘 - + A dialog is already open in the task panel 一个对话框已在任务面板打开 - + Do you want to close this dialog? 您要关闭此对话框吗? - + Invalid sketch 无效的草图 - + Do you want to open the sketch validation tool? 你想打开草图验证工具么？ - + The sketch is invalid and cannot be edited. 该草图不可用并不可编辑。 - + Please remove the following constraint: 请删除以下约束: - + Please remove at least one of the following constraints: 请至少删除以下约束之一: - + Please remove the following redundant constraint: 请删除以下冗余约束: - + Please remove the following redundant constraints: 请删除以下冗余约束: - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch 空草图 - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (单击选取) - + Fully constrained sketch 完全约束的草图 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 约束不足草图有 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 个</span></a> 自由度. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 约束不足草图有 <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 个</span></a> 自由度. %2 - + Solved in %1 sec 解算%1秒 - + Unsolved (%1 sec) 未解算(%1秒) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm index da0d0355af..c36c2f3d52 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 0f6966557f..22c9e6dae8 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -2662,7 +2662,9 @@ invalid constraints, degenerated geometry, etc. - + + + Update constraint's virtual space Update constraint's virtual space @@ -2672,12 +2674,12 @@ invalid constraints, degenerated geometry, etc. Add auto constraints - + Swap constraint names 調換拘束名稱 - + Rename sketch constraint Rename sketch constraint @@ -2745,42 +2747,42 @@ invalid constraints, degenerated geometry, etc. Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. 此版本的 OCE/OCC 並不支援控制點操作。你需要6.9.0版或更新的版本。 - + BSpline Geometry Index (GeoID) is out of bounds. BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -3892,12 +3894,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 調換拘束名稱 - + Unnamed constraint 未命名之拘束 - + Only the names of named constraints can be swapped. 僅有命名之拘束其名稱可以被調換 @@ -4627,11 +4629,6 @@ Defaults to: %N = %V DimensionalStringFormat DimensionalStringFormat - - - Mod/Sketcher - Mod/Sketcher - Visibility automation @@ -4897,11 +4894,6 @@ However, no constraints linking to the endpoints were found. All 所有 - - - Normal - 垂直 - Datums @@ -4917,34 +4909,192 @@ However, no constraints linking to the endpoints were found. Reference 參考 + + + Horizontal + 水平的 + + Vertical + 垂直 + + + + Coincident + Coincident + + + + Point on Object + Point on Object + + + + Parallel + 平行 + + + + Perpendicular + Perpendicular + + + + Tangent + 切線 + + + + Equality + Equality + + + + Symmetric + Symmetric + + + + Block + Block + + + + Distance + 距離 + + + + Horizontal Distance + Horizontal Distance + + + + Vertical Distance + Vertical Distance + + + + Radius + 半徑 + + + + Weight + Weight + + + + Diameter + 直徑 + + + + Angle + 角度 + + + + Snell's Law + Snell's Law + + + + Internal Alignment + Internal Alignment + + + + View + 檢視 + + + + Shows all the constraints in the list + Shows all the constraints in the list + + + + Show All + 顯示全部 + + + + Hides all the constraints in the list + Hides all the constraints in the list + + + + Hide All + Hide All + + + + Controls visualisation in the 3D view + Controls visualisation in the 3D view + + + + Automation + Automation + + + + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + Constraint visualisation tracks filter selection so that filtered out constraints are hidden + + + + Track filter selection + Track filter selection + + + + Controls widget list behaviour + Controls widget list behaviour + + + + List + 清單 + + + Internal alignments will be hidden Internal alignments will be hidden - + Hide internal alignment Hide internal alignment - + Extended information will be added to the list Extended information will be added to the list - + + Geometric + Geometric + + + Extended information Extended information - + Constraints Constraints - - + + + + + Error 錯誤 @@ -5303,136 +5453,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch 編輯草圖 - + A dialog is already open in the task panel 於工作面板已開啟對話窗 - + Do you want to close this dialog? 您確定要關閉此對話窗嗎? - + Invalid sketch 錯誤之草圖 - + Do you want to open the sketch validation tool? 您要開啟草圖驗證工具嗎? - + The sketch is invalid and cannot be edited. 此為無效且不能編輯之草圖 - + Please remove the following constraint: 請移除下列拘束： - + Please remove at least one of the following constraints: 請移除下列至少一個拘束： - + Please remove the following redundant constraint: 請移除下列多餘拘束： - + Please remove the following redundant constraints: 請移除下列多餘拘束： - + The following constraint is partially redundant: The following constraint is partially redundant: - + The following constraints are partially redundant: The following constraints are partially redundant: - + Please remove the following malformed constraint: Please remove the following malformed constraint: - + Please remove the following malformed constraints: Please remove the following malformed constraints: - + Empty sketch 空白草圖 - + Over-constrained sketch Over-constrained sketch - + Sketch contains malformed constraints Sketch contains malformed constraints - + Sketch contains conflicting constraints Sketch contains conflicting constraints - + Sketch contains redundant constraints Sketch contains redundant constraints - + Sketch contains partially redundant constraints Sketch contains partially redundant constraints - - - - + + + + (click to select) (按一下可選擇) - + Fully constrained sketch 完全拘束之草圖 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec 於%1秒求解完成 - + Unsolved (%1 sec) 未求解完成(%1秒) diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm index 9317136ae8..1c58d52bf9 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts index b99214bb58..6af82f08bc 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -348,7 +348,7 @@ Center - Střed + Na střed Right @@ -384,7 +384,7 @@ &Display unit - Zobrazit jednotku + &Zobrazit jednotku Unit string @@ -633,7 +633,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Remove column(s) - Odstranit sloupec(ů) + Odstranit sloupec(ce) Remove column(s) Remove column(s) Remove column(s) diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.qm index f699ad6afa..3b09bc4d09 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.ts index ecba96faf3..68391f7d4b 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-AR.ts @@ -578,16 +578,16 @@ Spreadsheet.mi_nombre_de_alias en lugar de Spreadsheet.B1 Insert %n row(s) below - + Insertar %n fila(s) debajo - Insert %n row(s) below + Insertar %n filas debajo Insert %n non-contiguous rows - + + Insertar %n filas no contiguas Insertar %n filas no contiguas - Insert %n non-contiguous rows @@ -613,9 +613,9 @@ Spreadsheet.mi_nombre_de_alias en lugar de Spreadsheet.B1 Insert %n non-contiguous columns - + + Insertar %n columnas no contiguas Insertar %n columnas no contiguas - Insert %n non-contiguous columns diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm index f2ecef24b2..b56434056c 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts index b4cf54c54b..56e151a16f 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts @@ -576,16 +576,16 @@ Spreadsheet.my_alias_name en lugar de Spreadsheet.B1 Insert %n row(s) below - + Insertar %n fila(s) debajo - Insert %n row(s) below + Insertar %n filas debajo Insert %n non-contiguous rows - + + Insertar %n filas no contiguas Insertar %n filas no contiguas - Insert %n non-contiguous rows @@ -611,9 +611,9 @@ Spreadsheet.my_alias_name en lugar de Spreadsheet.B1 Insert %n non-contiguous columns - + + Insertar %n columnas no contiguas Insertar %n columnas no contiguas - Insert %n non-contiguous columns diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm index 76ef712665..65ff3fe716 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts index ad205029f6..1e25930181 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_eu.ts @@ -604,9 +604,9 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 Insert %n column(s) right - - Insert %n column(s) right - Insert %n column(s) right + + Txertatu zutabe %n eskuinean + Txertatu %n zutabe eskuinean diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm index 7d9afeffc2..b1e74c9cd6 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts index 1bf2ba415f..2479dd6979 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts @@ -307,7 +307,7 @@ By using ";;" to separate paths, you can add several folders here Show tips - Show tips + Zobrazit tipy diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm index 4c849d8c54..a06388d501 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts index d23e9f791f..13a8525866 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_eu.ts @@ -302,7 +302,7 @@ By using ";;" to separate paths, you can add several folders here Shows a notepad next to the file thumbnails, where you can keep notes across sessions - Shows a notepad next to the file thumbnails, where you can keep notes across sessions + Ohar-blok bat erakusten du fitxategi-miniaturen alboan, saioen artean oharrak hartu ahal ditzazun @@ -342,7 +342,7 @@ By using ";;" to separate paths, you can add several folders here Background color down gradient - Background color down gradient + Atzeko planoko kolorearen beherako gradientea @@ -362,7 +362,7 @@ By using ";;" to separate paths, you can add several folders here If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below + Hau markatuta badago eta estilo-orri bat adierazi bada hobespen orokorretan, hura erabiliko da eta hemengo koloreak gainidatziko dira @@ -467,12 +467,12 @@ By using ";;" to separate paths, you can add several folders here Choose which workbench to switch to after the program launches - Choose which workbench to switch to after the program launches + Aukeratu zein lan-mahai irekiko den programa abiarazi ondoren If checked, will automatically close the Start page when FreeCAD launches - If checked, will automatically close the Start page when FreeCAD launches + Markatuta badago, hasiera-orria automatikoki itxiko da FreeCAD abiarazten denean @@ -487,12 +487,12 @@ By using ";;" to separate paths, you can add several folders here Close and switch on opening file - Close and switch on opening file + Itxi eta aldatu fitxategia irekitzean If application is started by opening a file, apply the two settings above - If application is started by opening a file, apply the two settings above + Aplikazioa fitxategi bat irekita hasten bada, aplikatu goiko bi ezarpenak diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm index 95f1ade286..12145825f3 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts index c2f27c4782..629c74dfe5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ar.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + رسم تقني + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + رسم تقني + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + رسم تقني + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + رسم تقني + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + رسم تقني + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ يتعذر تحديد الصفحة الصحيحة. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF تصدير الصفحة بصيغة PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG تصدير الصفحة بصيغة SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Object dependencies @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,51 +3609,51 @@ Fast, but result is a collection of short straight lines. تصدير PDF - + Different orientation توجيه مختلف - + The printer uses a different orientation than the drawing. Do you want to continue? تقوم الطابعة باستعمال توجيه مختلف عن التوجيه المستعمل في الرسم. هل ترغب في الإستمرار؟ - + Different paper size حجم ورق مختلف - + The printer uses a different paper size than the drawing. Do you want to continue? تقوم الطابعة باستعمال حجم ورق مختلف عن الحجم المستعمل في الرسم. هل ترغب في الإستمرار؟ - + Opening file failed تعذّر فتح الملف - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: محدد: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.qm index 17c7cde243..7a14be6383 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.ts index 55feb52be3..ea426dc9e0 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_bg.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Технически чертеж + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Технически чертеж + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Технически чертеж + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Технически чертеж + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Технически чертеж + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Can not determine correct page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Всички файлове (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Object dependencies @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Изнасяне в PDF - + Different orientation Различна ориентация - + The printer uses a different orientation than the drawing. Do you want to continue? Принтерът използва различна ориентация от рисунката. Искате ли да продължите? - + Different paper size Различен размер на хартията - + The printer uses a different paper size than the drawing. Do you want to continue? Принтерът използва различен размер на хартията от рисунката. Искате ли да продължите? - + Opening file failed Отваряне на файла е неуспешно - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Избранo: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm index 289c58010f..d496fe29d2 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index 7bf73b2ead..a8174ec1c7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -367,6 +367,116 @@ Exportar una pàgina com a SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Guardar pàgina com dxf @@ -1752,28 +1862,28 @@ No es pot determinar la pàgina correcta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tots els arxius (*.*) - + Export Page As PDF Exporta la Pàgina com a PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta la Pàgina com a SVG @@ -1905,17 +2015,71 @@ Edit %1 Editar %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No podeu suprimir aquesta línia guia perquè conté un símbol de soldadura que es trencaria. - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dependències de l'objecte @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. No podeu suprimir aquesta vista perquè conté una vista de secció que es trencaria. - + You cannot delete this view because it has a detail view that would become broken. No podeu suprimir aquesta vista perquè conté una vista de detall que es trencaria. - + You cannot delete this view because it has a leader line that would become broken. No podeu suprimir aquesta vista perquè conté una línia guia que es trencaria. @@ -3434,49 +3598,49 @@ Fast, but result is a collection of short straight lines. Exporta a PDF - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent que la del dibuix. Voleu continuar? - + Different paper size Mida de paper diferent - + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent que la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir l'arxiu - + Can not open file %1 for writing. No s'ha pogut obrir el fitxer %1 per a escriure-hi. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionat: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm index 2b4a14189f..1a7c23adf3 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 175305e63f..f9d3829bea 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -346,7 +346,7 @@ Save Dxf File - Save Dxf File + Uložit soubor Dxf @@ -367,6 +367,116 @@ Exportovat stránku do SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Uložit stránku do dxf @@ -1752,28 +1862,28 @@ Nemohu určit správnou stránku. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Všechny soubory (*.*) - + Export Page As PDF Exportovat stránku do PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportovat stránku do SVG @@ -1905,17 +2015,71 @@ Edit %1 Upravit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nemůžete smazat tento odkaz, protože obsahuje symbol svaru, který by se rozbil. - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Závislosti objektu @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Nemůžete odstranit tento pohled, protože obsahuje pohled řezu, který by se rozbil. - + You cannot delete this view because it has a detail view that would become broken. Nemůžete odstranit tento pohled, protože obsahuje detailní pohled, který by se rozbil. - + You cannot delete this view because it has a leader line that would become broken. Nemůžete odstranit tento pohled, protože obsahuje odkazovou čáru, která by se rozbila. @@ -2083,7 +2247,7 @@ the top and left view border Hidden Line - Hidden Line + Skrytá čára @@ -2142,7 +2306,7 @@ the top and left view border Flips the sides - Flips the sides + Překlopit strany @@ -2223,7 +2387,7 @@ Tento adresář bude použit pro výběr symbolů. Tail Text - Tail Text + Konec textu @@ -2237,7 +2401,7 @@ Tento adresář bude použit pro výběr symbolů. Edge Fuzz - Edge Fuzz + Neostrá hrana @@ -2288,7 +2452,7 @@ Then you need to increase the tile limit. Show Loose 2D Geom - Show Loose 2D Geom + Ukázat ztracenou 2D geometrii @@ -2308,7 +2472,7 @@ Then you need to increase the tile limit. Fuse Before Section - Fuse Before Section + Před řezem sloučit @@ -2590,7 +2754,7 @@ Každá část je přibližně 0,1 mm široká Section Line Style - Section Line Style + Styl čáry řezu @@ -2600,7 +2764,7 @@ Každá část je přibližně 0,1 mm široká Show Center Marks - Show Center Marks + Zobrazit středové značky @@ -2655,7 +2819,7 @@ Každá část je přibližně 0,1 mm široká Print Center Marks - Print Center Marks + Tisknout středové značky @@ -2689,37 +2853,37 @@ Každá část je přibližně 0,1 mm široká Normal line color - Normal line color + Normální barva čáry Hidden Line - Hidden Line + Skrytá čára Hidden line color - Hidden line color + Barva skryté čáry Preselected - Preselected + Předvolená Preselection color - Preselection color + Předvolená barva Section Face - Section Face + Řez plochy Section face color - Section face color + Barva řezu plochy @@ -2809,12 +2973,12 @@ Každá část je přibližně 0,1 mm široká Transparent Faces - Transparent Faces + Průhledný povrch Face color (if not transparent) - Face color (if not transparent) + Barva povrchu (pokud není průhledná) @@ -3076,12 +3240,12 @@ for ProjectionGroups First - First + První Third - Third + Třetí @@ -3285,7 +3449,7 @@ Fast, but result is a collection of short straight lines. Hidden - Hidden + Skryté @@ -3354,7 +3518,7 @@ Fast, but result is a collection of short straight lines. View Custom Scale - View Custom Scale + Zobrazit vlastní měřítko @@ -3374,7 +3538,7 @@ Fast, but result is a collection of short straight lines. Vertex Scale - Vertex Scale + Měřítko vrcholu @@ -3389,7 +3553,7 @@ Fast, but result is a collection of short straight lines. Center Mark Scale - Center Mark Scale + Měřítko středové značky @@ -3440,51 +3604,51 @@ Fast, but result is a collection of short straight lines. Export PDF - + Different orientation Jiná orientace - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskárna používá jinou orientaci než výkres. Chcete pokračovat? - + Different paper size Jiný formát papíru - + The printer uses a different paper size than the drawing. Do you want to continue? Tiskárna používá jiný formát papíru než výkres. Chcete pokračovat? - + Opening file failed Otevření souboru selhalo - + Can not open file %1 for writing. Soubor %1 nelze otevřít pro zápis. - + Save Dxf File - Save Dxf File + Uložit soubor Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Vybráno: @@ -3502,7 +3666,7 @@ Chcete pokračovat? Symbol Chooser - Symbol Chooser + Výběr symbolu @@ -3512,7 +3676,7 @@ Chcete pokračovat? Symbol Dir - Symbol Dir + Symbol Dir @@ -3535,7 +3699,7 @@ Chcete pokračovat? Text to be displayed - Text to be displayed + Text k zobrazení @@ -3555,12 +3719,12 @@ Chcete pokračovat? Font Size: - Font Size: + Velikost písma: Bubble Shape: - Bubble Shape: + Tvar bubliny: @@ -3605,7 +3769,7 @@ Chcete pokračovat? Shape Scale: - Shape Scale: + Měřítko tvaru: @@ -3615,17 +3779,17 @@ Chcete pokračovat? End Symbol: - End Symbol: + Koncový symbol: End symbol for the balloon line - End symbol for the balloon line + Koncový symbol pro šňůru balonu End Symbol Scale: - End Symbol Scale: + Měřítko koncového symbolu: @@ -3660,7 +3824,7 @@ Chcete pokračovat? Leader line width - Leader line width + Šířka vodící čáry @@ -3938,17 +4102,17 @@ Chcete pokračovat? Drag Highlight - Drag Highlight + Kreslit zvýrazněně scale factor for detail view - scale factor for detail view + měřítko náhledu detailu size of detail view - size of detail view + velikost náhledu detailu @@ -3956,10 +4120,10 @@ Chcete pokračovat? Automatic: if the detail view is larger than the page, it will be scaled down to fit into the page Custom: custom scale factor is used - Page: scale factor of page is used -Automatic: if the detail view is larger than the page, - it will be scaled down to fit into the page -Custom: custom scale factor is used + Stránka: měřítka stránky při volbě +Automaticky: pokud je zobrazení detailu větší než stránka, + bude zmenšen, aby se vešel na stránku +Vlastní: je použito vlastní měřítko uživatele @@ -3989,7 +4153,7 @@ Custom: custom scale factor is used Scale Factor - Scale Factor + Měřítko @@ -4004,7 +4168,7 @@ Custom: custom scale factor is used reference label - reference label + referenční štítek @@ -4032,7 +4196,7 @@ Custom: custom scale factor is used Tolerancing - Tolerancing + Tolerance @@ -4086,7 +4250,7 @@ by negative value of 'Over Tolerance'. Formatting - Formatting + Formátování @@ -4096,7 +4260,7 @@ by negative value of 'Over Tolerance'. Text to be displayed - Text to be displayed + Text k zobrazení @@ -4139,7 +4303,7 @@ be used instead if the dimension value Display Style - Display Style + Styl zobrazení @@ -4159,7 +4323,7 @@ be used instead if the dimension value Font Size: - Font Size: + Velikost písma: @@ -4169,7 +4333,7 @@ be used instead if the dimension value Drawing Style: - Drawing Style: + Styl kreslení: @@ -4202,7 +4366,7 @@ be used instead if the dimension value Restore Invisible Lines - Restore Invisible Lines + Obnovit neviditelné čáry @@ -4444,7 +4608,7 @@ You can pick further points to get line segments. Line Decoration - Line Decoration + Styl čáry @@ -4743,7 +4907,7 @@ using the given X/Y Spacing Auto Distribute - Auto Distribute + Přiřadit automaticky @@ -4771,7 +4935,7 @@ using the given X/Y Spacing Restore Invisible Lines - Restore Invisible Lines + Obnovit neviditelné čáry @@ -4935,7 +5099,7 @@ using the given X/Y Spacing Identifier - Identifier + Identifikátor @@ -4965,7 +5129,7 @@ using the given X/Y Spacing Section Plane Location - Section Plane Location + Umístění roviny řezu @@ -5126,12 +5290,12 @@ using the given X/Y Spacing Add Lines - Add Lines + Vložit linie Add Vertices - Add Vertices + Přidat vrcholy @@ -5141,7 +5305,7 @@ using the given X/Y Spacing TechDraw Pages - TechDraw Pages + TechDraw stránky diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm index 87e6f66b4a..38f9539743 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index 498466e2fc..303a5da4fe 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -367,6 +367,116 @@ Seite als SVG-Datei exportieren + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Technisches Zeichnen + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Technisches Zeichnen + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Technisches Zeichnen + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Technisches Zeichnen + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Technisches Zeichnen + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Seite als dxf speichern @@ -1752,28 +1862,28 @@ Kann die richtige Seite nicht bestimmen - + PDF (*.pdf) PDF (*.PDF) - - + + All Files (*.*) Alle Dateien (*.*) - + Export Page As PDF Seite als PDF-Datei exportieren - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Seite als SVG-Datei exportieren @@ -1905,17 +2015,71 @@ Edit %1 %1 bearbeiten + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Diese Hinweislinie kann nicht gelöscht werden, weil ihr ein Schweißsymbol zugeordnet ist, das dadurch unbrauchbar werden würde. - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Objektabhängigkeiten @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Diese Ansicht kann nicht gelöscht werden, da sie eine Schnittansicht hat, die dadurch kaputt werden würde. - + You cannot delete this view because it has a detail view that would become broken. Diese Ansicht kann nicht gelöscht werden, da sie eine Detailansicht hat, die beschädigt werden könnte. - + You cannot delete this view because it has a leader line that would become broken. Diese Ansicht kann nicht gelöscht werden, weil ihr eine Hinweislinie zugeordnet ist, die dadurch unbrauchbar werden würde. @@ -3438,49 +3602,49 @@ Schnell, aber das Ergebnis ist eine Sammlung von kurzen geraden Linien.PDF exportieren - + Different orientation Andere Ausrichtung - + The printer uses a different orientation than the drawing. Do you want to continue? Der Drucker verwendet eine andere Ausrichtung als die Zeichnung. Möchten Sie fortfahren? - + Different paper size Anderes Papierformat - + The printer uses a different paper size than the drawing. Do you want to continue? Der Drucker verwendet eine andere Papiergröße als die Zeichnung. Möchten Sie fortfahren? - + Opening file failed Fehler beim Öffnen der Datei - + Can not open file %1 for writing. Datei %1 kann nicht zum Schreiben geöffnet werden. - + Save Dxf File Speichern als Dxf Datei - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Ausgewählt: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm index 2bebd3f542..3c30fe8c6d 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index ff9cec6bcd..b89be48e27 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Τεχνική Σχεδίαση + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Τεχνική Σχεδίαση + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Τεχνική Σχεδίαση + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Τεχνική Σχεδίαση + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Τεχνική Σχεδίαση + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Αδύνατος ο προσδιορισμός της σωστής σελίδας. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Όλα τα αρχεία (*.*) - + Export Page As PDF Εξαγωγή Σελίδας ως PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Εξαγωγή Σελίδας ως SVG @@ -1905,18 +2015,72 @@ Edit %1 Επεξεργασία του %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Εξαρτήσεις αντικειμένου @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,51 +3609,51 @@ Fast, but result is a collection of short straight lines. Εξαγωγή σε PDF - + Different orientation Διαφορετικός προσανατολισμός - + The printer uses a different orientation than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό προσανατολισμό από το σχέδιο. Θέλετε να συνεχίσετε; - + Different paper size Διαφορετικό μέγεθος χαρτιού - + The printer uses a different paper size than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό μέγεθος χαρτιού από το σχέδιο. Θέλετε να συνεχίσετε; - + Opening file failed Αποτυχία ανοίγματος αρχείου - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Επιλεγμένα: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm index 6a720ac4d1..5bef29f4f8 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index 80588bcadb..a50342883c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -367,6 +367,116 @@ Exportar Página como SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + DibujoTécnico + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + DibujoTécnico + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + DibujoTécnico + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + DibujoTécnico + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + DibujoTécnico + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Guardar página como dxf @@ -1752,28 +1862,28 @@ No se puede determinar la página correcta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos los archivos (*.*) - + Export Page As PDF Exportar Página Como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página como SVG @@ -1905,18 +2015,72 @@ Edit %1 Editar %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No puede borrar esta línea de referencia porque tiene un símbolo de soldadura que se rompería. - + @@ -1925,9 +2089,9 @@ tiene un símbolo de soldadura que se rompería. - - - + + + Object dependencies Dependencias del objeto @@ -1939,19 +2103,19 @@ tiene un símbolo de soldadura que se rompería. - + You cannot delete this view because it has a section view that would become broken. No puede eliminar esta vista porque tiene una vista de corte que se rompería. - + You cannot delete this view because it has a detail view that would become broken. No puede eliminar esta vista porque tiene una vista de detalle que se rompería. - + You cannot delete this view because it has a leader line that would become broken. No puede eliminar esta vista porque contiene una línea de referencia que se rompería. @@ -3443,51 +3607,51 @@ Rápido, pero el resultado es una colección de líneas rectas cortas.Exportar a PDF - + Different orientation Orientación diferente de la hoja - + The printer uses a different orientation than the drawing. Do you want to continue? La impresora utiliza una orientación de papel distinta a la del dibujo. ¿Desea continuar? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? La impresora usa un tamaño de papel distinto al del dibujo. ¿Desea continuar? - + Opening file failed No se pudo abrir el archivo - + Can not open file %1 for writing. No se puede abrir el archivo %1 para escritura. - + Save Dxf File Guardar archivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionado: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm index 8ac5573d8d..76e87a9feb 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index 3031ab1bec..32ae0434f1 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -367,6 +367,116 @@ Exportar página como SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Guardar página como dxf @@ -1752,28 +1862,28 @@ No se puede determinar la página correcta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos los archivos (*.*) - + Export Page As PDF Exportar página como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página como SVG @@ -1905,18 +2015,72 @@ Edit %1 Editar %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. No puede borrar esta línea de referencia porque tiene un símbolo de soldadura que se rompería. - + @@ -1925,9 +2089,9 @@ tiene un símbolo de soldadura que se rompería. - - - + + + Object dependencies Dependencias del objeto @@ -1939,19 +2103,19 @@ tiene un símbolo de soldadura que se rompería. - + You cannot delete this view because it has a section view that would become broken. No puede eliminar esta vista porque tiene una vista de sección que se rompería. - + You cannot delete this view because it has a detail view that would become broken. No puede eliminar esta vista porque tiene una vista de detalle que se rompería. - + You cannot delete this view because it has a leader line that would become broken. No puede eliminar esta vista porque contiene una línea de referencia que se rompería. @@ -3443,51 +3607,51 @@ Rápido, pero los resultados son una colección de líneas rectas cortas.Exportar en PDF - + Different orientation Orientación diferente de la hoja - + The printer uses a different orientation than the drawing. Do you want to continue? La impresora utiliza una orientación de papel distinta a la del dibujo. ¿Desea continuar? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? La impresora usa un tamaño de papel distinto al del dibujo. ¿Desea continuar? - + Opening file failed No se pudo abrir el archivo - + Can not open file %1 for writing. No se puede abrir el archivo %1 para la escritura. - + Save Dxf File Guardar archivo Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionado: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm index a189d996b6..6e71943d63 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index ba45eaf504..a78f5ef0f8 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -367,6 +367,116 @@ Esportatu orrialdea SVG gisa + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Gorde orria DXF fitxategi batean @@ -1752,28 +1862,28 @@ Ezin izan da orrialde zuzena zehaztu. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Fitxategi guztiak (*.*) - + Export Page As PDF Esportatu orrialdea PDF gisa - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esportatu orrialdea SVG gisa @@ -1905,18 +2015,72 @@ Edit %1 Editatu %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Ezin da gida-marra hau ezabatu hautsi daitekeen soldadura-ikur bat duelako. - + @@ -1925,9 +2089,9 @@ hautsi daitekeen soldadura-ikur bat duelako. - - - + + + Object dependencies Objektuaren mendekotasunak @@ -1939,19 +2103,19 @@ hautsi daitekeen soldadura-ikur bat duelako. - + You cannot delete this view because it has a section view that would become broken. Ezin da bista hau ezabatu hautsita geratuko litzatekeen sekzio-bista bat duelako. - + You cannot delete this view because it has a detail view that would become broken. Ezin da bista hau ezabatu hautsita geratuko litzatekeen bista xehe bat duelako. - + You cannot delete this view because it has a leader line that would become broken. Ezin da bista hau ezabatu hautsita geratuko litzatekeen gida-marra bat duelako. @@ -3445,51 +3609,51 @@ Azkarra, baina lerro zuzen laburren bilduma bat ematen du. Esportatu PDFa - + Different orientation Orientazio desberdina - + The printer uses a different orientation than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak orientazio desberdina dute. Jarraitu nahi duzu? - + Different paper size Paper-tamaina desberdina - + The printer uses a different paper size than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak paper-tamaina desberdina dute. Jarraitu nahi duzu? - + Opening file failed Fitxategia irekitzeak huts egin du - + Can not open file %1 for writing. Ezin da %1 fitxategia ireki hura idazteko. - + Save Dxf File Gorde DXF fitxategia - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Hautatua: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm index 4b9f4ac412..4a73d017d4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index 15ecccd8e7..8863ea76ee 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -367,6 +367,116 @@ Vie sivu SVG-tiedostoon + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Tallenna sivu dxf: ään @@ -1752,28 +1862,28 @@ Oikeaa sivua ei voida määrittää. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Kaikki tiedostot (*.*) - + Export Page As PDF Vie Sivu PDF-tiedostoon - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Vie sivu SVG-tiedostoon @@ -1905,17 +2015,71 @@ Edit %1 Muokkaa %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Tätä Reittiviivaa ei voi poistaa, koska siihen on liitetty hitsaussymboli, joka rikkoutuisi. - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Kohteiden riippuvuudet @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Et voi poistaa tätä Näkymää, koska siihen on liitetty Poikkileikkausnäkymä joka rikkoutuisi. - + You cannot delete this view because it has a detail view that would become broken. Et voi poistaa tätä Näkymää, koska siihen on liitetty Detaljinäkymä joka rikkoutuisi. - + You cannot delete this view because it has a leader line that would become broken. Et voi poistaa tätä Näkymää, koska siihen on liitetty Reittiviiva joka rikkoutuisi. @@ -3438,51 +3602,51 @@ Nopea, mutta tulos on kokoelma lyhyitä suoria viivoja. Vienti PDF - + Different orientation Erilainen sivun suunta - + The printer uses a different orientation than the drawing. Do you want to continue? Tulostin käyttää eri paperisuuntaa kuin piirros. Haluatko jatkaa? - + Different paper size Erilainen paperikoko - + The printer uses a different paper size than the drawing. Do you want to continue? Tulostin käyttää eri paperikokoa kuin piirros. Haluatko jatkaa? - + Opening file failed Tiedoston avaaminen epäonnistui - + Can not open file %1 for writing. Tiedostoon ”%1” ei voida tallentaa. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Valittu: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm index ca840ee11b..968175a72e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts index 0b204647f7..d78b4cef24 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fil.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Hindi matukoy ang tamang pahina. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF I-luwas ang Pahina Bilang PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG I-luwas pahina ng SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dependencies ng object @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3446,51 +3610,51 @@ Fast, but result is a collection of short straight lines. I-export ang PDF - + Different orientation Ibang orientasyon - + The printer uses a different orientation than the drawing. Do you want to continue? Ang printer ay gumagamit ng ibang orientasyon kaysa sa drawing. Gusto mong magpatuloy? - + Different paper size Ibang laki ng papel - + The printer uses a different paper size than the drawing. Do you want to continue? Ang printer ay gumagamit ng ibang sukat ng papel kaysa sa drawing. Gusto mong magpatuloy? - + Opening file failed Hindi nagtagumpay ang pagbubukas ng file - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Hinirang: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm index b5be1528b3..338752bd6e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 587404b077..5add301b71 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -367,6 +367,116 @@ Exporter une Page au format SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Enregistrer la page en dxf @@ -1753,28 +1863,28 @@ Impossible de déterminer la page correcte. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tous les fichiers (*.*) - + Export Page As PDF Exporter la page au format PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporter la page au format SVG @@ -1906,18 +2016,72 @@ Edit %1 Modifier %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Vous ne pouvez pas supprimer cette ligne de référence car elle a un symbole de soudure qui serait cassé. - + @@ -1926,9 +2090,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dépendances des objets @@ -1940,19 +2104,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Vous ne pouvez pas supprimer cette vue car elle comporte une vue en coupe qui sera cassée. - + You cannot delete this view because it has a detail view that would become broken. Vous ne pouvez pas supprimer cette vue car elle comporte une vue de détail qui sera cassée. - + You cannot delete this view because it has a leader line that would become broken. Vous ne pouvez pas supprimer cette vue car elle comporte une ligne de référence qui sera cassée. @@ -3439,49 +3603,49 @@ Fast, but result is a collection of short straight lines. Exporter vers PDF - + Different orientation Orientation différente - + The printer uses a different orientation than the drawing. Do you want to continue? L'imprimante utilise une autre orientation que le dessin. Voulez-vous continuer ? - + Different paper size Format de papier différent - + The printer uses a different paper size than the drawing. Do you want to continue? L'imprimante utilise un format de papier différent que le dessin. Voulez-vous continuer ? - + Opening file failed L'ouverture du fichier a échoué - + Can not open file %1 for writing. Impossible d’ouvrir le fichier %1 en écriture. - + Save Dxf File Enregistrez le fichier Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Sélectionné: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm index 869fbaddaf..b9a490f8c4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index 2da8323d4b..9514604b39 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Non se pode determinar a páxina correcta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tódolos ficheiros (*.*) - + Export Page As PDF Exporta Páxina Como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta páxina como SVG @@ -1905,18 +2015,72 @@ Edit %1 Editar %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dependencias do obxecto @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,51 +3609,51 @@ Fast, but result is a collection of short straight lines. Exportar en PDF - + Different orientation Orientación diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impresora usa unha orientación de papel diferente da do debuxo. Quere seguir? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impresora usa un tamaño de papel diferente do do debuxo. Quere seguir? - + Opening file failed Falla ó abrir o ficheiro - + Can not open file %1 for writing. Non se pode abrir o ficheiro %1 para escribir. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Escolmado: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm index 515afa44bc..d14520c49e 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index a26a8930df..9cc9783370 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -367,6 +367,116 @@ Izvezi stranicu kao SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Tehničko Crtanje + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Tehničko Crtanje + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Tehničko Crtanje + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Tehničko Crtanje + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Tehničko Crtanje + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -845,7 +955,7 @@ - + Save page to dxf Save page to dxf @@ -1756,28 +1866,28 @@ Nije moguće odrediti točnu stranicu. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Sve datoteke (*.*) - + Export Page As PDF Izvoz Stranice u PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvoz Stranice u SVG @@ -1909,11 +2019,65 @@ Edit %1 Uređivanje %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Ne možete izbrisati ovu liniju vodilicu jer @@ -1922,7 +2086,7 @@ ima simbol spajanja koji bi se pokidao. - + @@ -1931,9 +2095,9 @@ ima simbol spajanja koji bi se pokidao. - - - + + + Object dependencies Zavisnosti objekta @@ -1945,20 +2109,20 @@ ima simbol spajanja koji bi se pokidao. - + You cannot delete this view because it has a section view that would become broken. Ne možete izbrisati ovaj pogled jer ima prikaz presjeka koji bi se slomio. - + You cannot delete this view because it has a detail view that would become broken. Ne možete izbrisati ovaj pogled jer ima detaljan prikaz koji bi se slomio. - + You cannot delete this view because it has a leader line that would become broken. Ne možete izbrisati ovaj prikaz jer on sadrži liniju oznake koja bi postala neupotrebljiva. @@ -3511,49 +3675,49 @@ Brzo, ali rezultat je zbirka kratkih ravnih linija. Izvoz PDF - + Different orientation Drugačija orijentacija - + The printer uses a different orientation than the drawing. Do you want to continue? Pisač koristi drugu orijentaciju ispisa nego što je u crtežu. Želite li nastaviti? - + Different paper size Drugačija veličina papira - + The printer uses a different paper size than the drawing. Do you want to continue? Pisač koristi drugu veličinu papra nego što je u crtežu. Želite li nastaviti? - + Opening file failed Otvaranje dokumenta nije uspjelo - + Can not open file %1 for writing. Ne mogu otvoriti dokument %1 za ispis. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Odabrane: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm index 4352381af7..af0bab41a9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index d60347bef2..ebcec06445 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -367,6 +367,116 @@ Oldal exportálása SVG-ként + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + MűszakiRajz + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + MűszakiRajz + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + MűszakiRajz + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + MűszakiRajz + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + MűszakiRajz + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Oldal mentése dxf-be @@ -1752,28 +1862,28 @@ Nem tudja meghatározni a megfelelő oldalt. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Összes fájl (*.*) - + Export Page As PDF Oldal export PDF formában - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Oldal export SVG formában @@ -1905,18 +2015,72 @@ Edit %1 %1 szerkesztése + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nem törölheti ezt a vezérvonalat, mert olyan hegesztési szimbólummal rendelkezik, amely megtörne. - + @@ -1925,9 +2089,9 @@ olyan hegesztési szimbólummal rendelkezik, amely megtörne. - - - + + + Object dependencies Objektumfüggőségek @@ -1939,19 +2103,19 @@ olyan hegesztési szimbólummal rendelkezik, amely megtörne. - + You cannot delete this view because it has a section view that would become broken. Ezt a nézetet nem törölheti, mert olyan szakasznézete van, amely megtörne. - + You cannot delete this view because it has a detail view that would become broken. Ez a nézet nem törölhető, mert rajta egy részletnézet kapcsolata megszakadna. - + You cannot delete this view because it has a leader line that would become broken. Nem törölheti ezt a nézetet, mert van egy vezérvonala, amely megszakadna. @@ -3445,50 +3609,50 @@ Fast, but result is a collection of short straight lines. Exportálás PDF-be - + Different orientation Eltérő tájolású - + The printer uses a different orientation than the drawing. Do you want to continue? A nyomtató a rajztól eltérő tájolást használ. Szeretné fojtatni? - + Different paper size Eltérő papírméret - + The printer uses a different paper size than the drawing. Do you want to continue? A nyomtató a rajztól eltérő méretű papír méretet használ. Szeretné folytatni? - + Opening file failed Fájl megnyitása sikertelen - + Can not open file %1 for writing. %1 fájlt nem nyitható meg íráshoz. - + Save Dxf File Dxf-fájl mentése - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Kiválasztott: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm index 271f82a25f..b058e0c6b1 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts index 799d75bc41..4ae112839a 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_id.ts @@ -367,6 +367,116 @@ Ekspor Halaman sebagai SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Tidak dapat menentukan halaman yang benar. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Halaman Ekspor Sebagai PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Ekspor sebagai SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Objek dependensi @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Ekspor PDF - + Different orientation Orientasi berbeda - + The printer uses a different orientation than the drawing. Do you want to continue? Printer menggunakan orientasi yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - + Different paper size Ukuran kertas berbeda - + The printer uses a different paper size than the drawing. Do you want to continue? Printer menggunakan ukuran kertas yang berbeda dari pada gambar. Apakah Anda ingin melanjutkan? - + Opening file failed Membuka file gagal - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Simpan Berkas Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Terpilih: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm index 71654fa5dd..7328b2a263 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index 2fa7ac57e7..b5f00d436b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -367,6 +367,116 @@ Esporta la pagina in SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Salva pagina su dxf @@ -1752,28 +1862,28 @@ Non si può determinare la pagina corretta. - + PDF (*.pdf) PDF (*. pdf) - - + + All Files (*.*) Tutti i File (*.*) - + Export Page As PDF Esporta pagina in PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esporta pagina in SVG @@ -1905,18 +2015,72 @@ Edit %1 Edita %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Non è possibile eliminare questa linea guida perché essa ha un simbolo di saldatura che si romperebbe. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dipendenze dell'oggetto @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Non è possibile eliminare questa vista perché ha una vista in sezione che si romperebbe. - + You cannot delete this view because it has a detail view that would become broken. Non è possibile eliminare questa vista perché ha una vista in dettaglio che si romperebbe. - + You cannot delete this view because it has a leader line that would become broken. Non è possibile eliminare questa vista perché ha una linea guida che si romperebbe. @@ -3444,49 +3608,49 @@ Fast, but result is a collection of short straight lines. Esporta in formato PDF - + Different orientation Orientamento diverso - + The printer uses a different orientation than the drawing. Do you want to continue? La stampante utilizza un orientamento diverso rispetto al disegno. Si desidera continuare? - + Different paper size Formato carta diverso - + The printer uses a different paper size than the drawing. Do you want to continue? La stampante utilizza un formato di carta diverso rispetto al disegno. Si desidera continuare? - + Opening file failed Apertura del file non riuscita - + Can not open file %1 for writing. Impossibile aprire il file %1 per la scrittura. - + Save Dxf File Salva File Dxf - + Dxf (*.dxf) DXF (*. dxf) - + Selected: Selezionato: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm index 7a6f265197..349fb5b5aa 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index c088782bad..a14e428a4d 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -367,6 +367,116 @@ ページをSVGとしてエクスポート + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf ページをDXFに保存 @@ -1752,28 +1862,28 @@ 正しいページを特定できません。 - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) すべてのファイル (*.*) - + Export Page As PDF ページをPDFとしてエクスポート - + SVG (*.svg) SVG (*.svg) - + Export page as SVG ページをSVGとしてエクスポート @@ -1905,17 +2015,71 @@ Edit %1 %1を編集 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. 壊れてしまう溶接記号があるため、この引き出し線を削除することはできません。 - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies オブジェクトの依存関係 @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. 壊れてしまう断面ビューがあるため、このビューを削除することはできません。 - + You cannot delete this view because it has a detail view that would become broken. 壊れてしまう詳細ビューがあるため、このビューを削除することはできません。 - + You cannot delete this view because it has a leader line that would become broken. 壊れてしまう引き出し線があるため、このビューを削除することはできません。 @@ -3435,50 +3599,50 @@ Fast, but result is a collection of short straight lines. PDFファイル形式でエクスポート - + Different orientation 異なる向き - + The printer uses a different orientation than the drawing. Do you want to continue? プリンターでは、図面と異なる印刷方向を使用します。続行しますか？ - + Different paper size 別の用紙サイズ - + The printer uses a different paper size than the drawing. Do you want to continue? プリンターでは、図面とは異なる用紙サイズを使用します。 続行しますか？ - + Opening file failed ファイルを開けませんでした。 - + Can not open file %1 for writing. 書き込み用ファイル %1 を開くことができません。 - + Save Dxf File Dxf ファイルを保存 - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 選択: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm index aa21d976d5..f7ce8c10fe 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts index 682de6c5b7..1370550a74 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_lt.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Techniniai brėžiniai + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Techniniai brėžiniai + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Techniniai brėžiniai + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Techniniai brėžiniai + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Techniniai brėžiniai + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Can not determine correct page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) All Files (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Daikto priklausomybės @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Eksportuoti į PDF - + Different orientation Kitokia padėtis - + The printer uses a different orientation than the drawing. Do you want to continue? Spausdintuvas naudoja kitokią lapo padėtį nei brėžinys. Ar norite tęsti? - + Different paper size Kitoks popieriaus dydis - + The printer uses a different paper size than the drawing. Do you want to continue? Spausdintuvas naudoja kitokio dydžio lapą, nei brėžinys. Ar norite tęsti? - + Opening file failed Failo atidarymas nepavyko - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Pasirinktas: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm index d1ec8e74ee..36a1da1ab6 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index 1eab97b366..bd2b916545 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -367,6 +367,116 @@ Exporteer pagina als DXF + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Pagina in dxf opslaan @@ -1752,28 +1862,28 @@ Kan de juiste pagina niet bepalen. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alle bestanden (*.*) - + Export Page As PDF Exporteren als PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporteren als SVG @@ -1905,18 +2015,72 @@ Edit %1 Bewerken %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. U kunt deze leiderslijn niet verwijderen omdat het een Lassymbool heeft dat kapot zou gaan. - + @@ -1925,9 +2089,9 @@ een Lassymbool heeft dat kapot zou gaan. - - - + + + Object dependencies Object afhankelijkheden @@ -1939,19 +2103,19 @@ een Lassymbool heeft dat kapot zou gaan. - + You cannot delete this view because it has a section view that would become broken. U kunt deze weergave niet verwijderen omdat deze een sectieweergave heeft die gebroken zou worden. - + You cannot delete this view because it has a detail view that would become broken. U kunt deze weergave niet verwijderen omdat deze een detailweergave heeft die gebroken zou worden. - + You cannot delete this view because it has a leader line that would become broken. U kunt deze weergave niet verwijderen omdat deze een leiderslijn heeft die gebroken zou worden. @@ -3445,50 +3609,50 @@ Snel, maar resulteert in een verzameling van korte rechte lijnen. Exporteren als PDF - + Different orientation Verschillende oriëntatie - + The printer uses a different orientation than the drawing. Do you want to continue? De printer gebruikt een andere richting dan de tekening. Wil je doorgaan? - + Different paper size Ander papierformaat - + The printer uses a different paper size than the drawing. Do you want to continue? De printer gebruikt een ander papierfromaat dan de tekening. Wilt u toch doorgaan? - + Opening file failed Bestand openen mislukt - + Can not open file %1 for writing. Kan bestand '%1' niet openen om te schrijven. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Geselecteerd: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index a2a0b6390e..95bcaae9f9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 09466cb2ed..1fa2f0be48 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -367,6 +367,116 @@ Wyeksportuj stronę jako SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Rysunek Techniczny + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Rysunek Techniczny + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Rysunek Techniczny + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Rysunek Techniczny + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Rysunek Techniczny + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -533,7 +643,7 @@ Link Dimension to 3D Geometry - Połącz wymiar z geometrią 3D + Powiąż wymiar z geometrią 3D @@ -843,7 +953,7 @@ - + Save page to dxf Zapisz stronę do pliku dxf @@ -1752,28 +1862,28 @@ Nie można ustalić prawidłowej strony. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Wszystkie pliki (*.*) - + Export Page As PDF Wyeksportuj stronę do PDF - + SVG (*.svg) SVG(*.svg) - + Export page as SVG Eksportuj stronę do formatu SVG @@ -1905,18 +2015,72 @@ Edit %1 Edytuj %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Nie możesz usunąć tej linii odniesienia, ponieważ zawiera symbol spoiny który zostałby uszkodzony. - + @@ -1925,9 +2089,9 @@ zawiera symbol spoiny który zostałby uszkodzony. - - - + + + Object dependencies Zależności obiektów @@ -1939,19 +2103,19 @@ zawiera symbol spoiny który zostałby uszkodzony. - + You cannot delete this view because it has a section view that would become broken. Nie możesz usunąć tego widoku, ponieważ ma on widok sekcji, który zostałby uszkodzony. - + You cannot delete this view because it has a detail view that would become broken. Nie możesz usunąć tego widoku, ponieważ ma on "widok części", który zostałby uszkodzony. - + You cannot delete this view because it has a leader line that would become broken. Nie możesz usunąć tego widoku, ponieważ ma on linię odniesienia, która zostałaby uszkodzona. @@ -2205,7 +2369,7 @@ na węźle w linii odniesienia Directory to welding symbols. This directory will be used for the symbol selection. - Katalog symboli spawania. + Katalog symboli spawalniczych. Ten katalog będzie używany do wyboru symboli. @@ -2311,12 +2475,12 @@ Następnie musisz zwiększyć limit fragmentów. Fuse Before Section - Operacja sumy logicznej przed przekrojem + Operacja złączenia przed przekrojem Highlights border of section cut in section views - Podświetla obramowania ciętych przekrojów w widokach przekroju + Podświetla granicę przekroju w widokach przekroju @@ -2994,7 +3158,7 @@ Mnożnik 'Rozmiar czcionki' Update With 3D (global policy) - Aktualizuj z 3D (polityka globalna) + Aktualizuj z widokiem 3D (polityka globalna) @@ -3172,7 +3336,7 @@ dla grup projektowych PAT File - Plik PAT + Plik w formacie PAT @@ -3446,50 +3610,50 @@ Szybkie, ale wynikiem jest kolekcja krótkich linii prostych. Eksportuj do formatu PDF - + Different orientation Odmienna orientacja - + The printer uses a different orientation than the drawing. Do you want to continue? Drukarka używa inną orientacje strony niż rysunek. Czy chcesz kontynuować? - + Different paper size Odmienny rozmiar papieru - + The printer uses a different paper size than the drawing. Do you want to continue? Drukarka używa innego rozmiaru papieru niż rysunek. Czy chcesz kontynuować? - + Opening file failed Otwarcie pliku nie powiodło się - + Can not open file %1 for writing. Nie można otworzyć pliku %1 do zapisu. - + Save Dxf File Zapisz plik Dxf - + Dxf (*.dxf) DXF (*.dxf) - + Selected: Zaznaczone: @@ -4955,7 +5119,7 @@ przy użyciu podanego odstępu X/Y Section Orientation - Wybierz orientacje + Kierunek przekroju diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm index bbb5f3cfcc..49d5e313dd 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index e1bc17bb0c..3376cfa9f6 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -367,6 +367,116 @@ Exportar Página como SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw - Desenhos Técnicos + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw - Desenhos Técnicos + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw - Desenhos Técnicos + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw - Desenhos Técnicos + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw - Desenhos Técnicos + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Salvar página para dxf @@ -1752,28 +1862,28 @@ Não é possível determinar a página correta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos os arquivos (*.*) - + Export Page As PDF Exportar página para PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página para SVG @@ -1905,18 +2015,72 @@ Edit %1 Editar %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Não é possível excluir esta linha de anotação porque ela tem um símbolo de solda que quebraria. - + @@ -1925,9 +2089,9 @@ ela tem um símbolo de solda que quebraria. - - - + + + Object dependencies Dependências do objeto @@ -1939,19 +2103,19 @@ ela tem um símbolo de solda que quebraria. - + You cannot delete this view because it has a section view that would become broken. Não é possível excluir esta vista porque ela tem uma vista de corte associada que ficaria quebrada. - + You cannot delete this view because it has a detail view that would become broken. Você não pode excluir esta vista porque ela tem uma vista detalhada associada que ficaria quebrada. - + You cannot delete this view because it has a leader line that would become broken. Não é possível excluir esta vista porque ela possui uma linha de anotações associada que ficaria quebrada. @@ -3445,50 +3609,50 @@ Rápido, mas produz uma coleção de linhas retas simples. Exportar PDF - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente do que o desenho. Deseja continuar? - + Different paper size Tamanho de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente do que o desenho. Deseja continuar? - + Opening file failed Falha ao abrir arquivo - + Can not open file %1 for writing. Não é possível abrir o arquivo '%1' para a gravação. - + Save Dxf File Salvar como Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Selecionado: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm index 7c453c319c..242ad12af4 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index 8ccc6cbe36..c86bdd9159 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -367,6 +367,116 @@ Exportar página como SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw (Desenhos Técnicos) + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Salvar folha para dxf @@ -1752,28 +1862,28 @@ Não é possível determinar a folha correta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Todos os Ficheiros (*. *) - + Export Page As PDF Exportar folha como PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar folha como SVG @@ -1905,18 +2015,72 @@ Edit %1 Edite %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Não é possível excluir esta linha de chamada porque ela tem um símbolo de soldadura que se quebrará. - + @@ -1925,9 +2089,9 @@ ela tem um símbolo de soldadura que se quebrará. - - - + + + Object dependencies Dependências do objeto @@ -1939,19 +2103,19 @@ ela tem um símbolo de soldadura que se quebrará. - + You cannot delete this view because it has a section view that would become broken. Não é possível apagar esta vista porque ela tem uma vista de corte que ficaria quebrada. - + You cannot delete this view because it has a detail view that would become broken. Não é possível apagar esta vista porque ela tem uma vista de detalhe que se quebrará. - + You cannot delete this view because it has a leader line that would become broken. Não é possível apagar esta vista porque ela tem uma linha de chamada que ficaria quebrada. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Exportar PDF - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente da folha de desenho. Deseja continuar? - + Different paper size Tamanho de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente da folha de desenho. Deseja continuar? - + Opening file failed Falha ao abrir ficheiro - + Can not open file %1 for writing. Não é possível abrir o ficheiro %1 para a escrita. - + Save Dxf File Gravar Ficheiro Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Selecionado: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm index 661945d10f..73e7f581f9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index 3bbb1fe280..9aa13a4ace 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Desen tehnic + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Desen tehnic + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Desen tehnic + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Desen tehnic + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Desen tehnic + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Nu poate determina pagina corectă. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Toate fișierele (*.*) - + Export Page As PDF Exportă pagina ca PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportă pagina ca SVG @@ -1905,18 +2015,72 @@ Edit %1 Editare %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dependențe obiect @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Exportă PDF - + Different orientation Orientare diferită - + The printer uses a different orientation than the drawing. Do you want to continue? Imprimanta utilizează o orientare diferită decât desenul. Doriţi să continuaţi? - + Different paper size Hârtie de dimensiune diferită - + The printer uses a different paper size than the drawing. Do you want to continue? Imprimanta utilizează o altă dimensiune de hârtie decât desenul. Doriţi să continuaţi? - + Opening file failed Deschiderea fișierului a eșuat - + Can not open file %1 for writing. Imposibil de deschis fișierul %1 la scriere. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf(*.dxf) - + Selected: Selectat: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm index 0f51bc82fa..b9344be0d9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index b5e28c7942..afb389d252 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -22,7 +22,7 @@ Add Midpoint Vertices - Добавить Средние Вершины + Добавить вершины по центрам граней @@ -82,7 +82,7 @@ Insert 3-Point Angle Dimension - Вставить Угловой размер по 3 точкам + Указать угловой размер по 3 точкам @@ -108,7 +108,7 @@ Insert Angle Dimension - Вставить Угловой размер + Указать угловой размер @@ -139,7 +139,7 @@ Insert a View of a Section Plane from Arch Workbench - Вставить вид Плоскости Сечения из верстака Arch + Вставить сечение Вида из верстака Arch @@ -165,7 +165,7 @@ Insert Center Line - Вставить осевую линию + Добавить осевую линию @@ -183,7 +183,7 @@ Insert Clip Group - Вставить группу сечений + Создать группу Видов @@ -196,7 +196,7 @@ Add View to Clip Group - Добавить вид в группу сечений + Добавляет Вид в группу @@ -209,7 +209,7 @@ Remove View from Clip Group - Удалить вид из группы сечений + Удалить Вид из группы @@ -222,7 +222,7 @@ Remove Cosmetic Object - Удалить Вспомогательный Объект + Удалить вспомогательный объект @@ -235,7 +235,7 @@ Add Cosmetic Vertex - Добавить Вспомогательную Вершину + Добавить вспомогательную вершину @@ -248,12 +248,12 @@ Insert Cosmetic Vertex - Вставить Вспомогательную Вершину + Вставить вспомогательную вершину Add Cosmetic Vertex - Добавить Вспомогательную Вершину + Добавить вспомогательную вершину @@ -284,7 +284,7 @@ Insert Detail View - Вставить Подробный Вид + Вставить выносной элемент @@ -297,7 +297,7 @@ Insert Diameter Dimension - Вставить Размер Диаметра + Указать диаметр @@ -310,7 +310,7 @@ Insert Dimension - Вставить размер + Указать размер @@ -367,6 +367,116 @@ Экспорт листа в SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Технический чертёж + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Технический чертёж + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Технический чертёж + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Технический чертёж + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Технический чертёж + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -377,17 +487,17 @@ Insert Extent Dimension - Вставить размер габаритов + Указать габаритный размер Horizontal Extent - Горизонтальный габарит + Горизонтальный габаритный размер Vertical Extent - Вертикальный габарит + Вертикальный габаритный размер @@ -439,7 +549,7 @@ Insert Horizontal Dimension - Вставить Горизонтальный размер + Указать горизонтальный размер @@ -452,7 +562,7 @@ Insert Horizontal Extent Dimension - Вставить Горизонтальный размер габарита + Указать горизонтальный габаритный размер @@ -494,7 +604,7 @@ Insert Landmark Dimension - EXPERIMENTAL - Вставить Размер знака - ЭКСПЕРИМЕНТАЛЬНО + Вставить размер знака - ЭКСПЕРИМЕНТАЛЬНО @@ -507,7 +617,7 @@ Add Leaderline to View - Добавить Линию-выноску в Вид + Добавить линию-выноску в Вид @@ -520,7 +630,7 @@ Insert Length Dimension - Вставить размер длины + Указать размер @@ -546,7 +656,7 @@ Add Midpoint Vertices - Добавить Средние Вершины + Добавить вершины по центрам граней @@ -595,7 +705,7 @@ Insert Projection Group - Вставить Группу проекций + Вставить группу проекций @@ -626,7 +736,7 @@ Insert Radius Dimension - Вставить размер Радиуса + Указать радиус @@ -639,7 +749,7 @@ Redraw Page - Перерисовать страницу + Обновить содержимое листа @@ -665,7 +775,7 @@ Insert Section View - Вставить Вид Сечения + Вставить сечение Вида @@ -728,7 +838,7 @@ Turn View Frames On/Off - Отображение рамки вкл/выкл + Скрыть/показать элементы для редактирования чертежа @@ -741,7 +851,7 @@ Insert Vertical Dimension - Задать вертикальный размер + Указать вертикальный размер @@ -754,7 +864,7 @@ Insert Vertical Extent Dimension - Вставить Вертикальный размер габарита + Указать вертикальный габаритный размер @@ -814,12 +924,12 @@ ClipGroupAdd - Добавить Группу Сечений + Добавить Вид в группу ClipGroupRemove - Удалить Группу Сечений + Удалить Вид из группы @@ -843,7 +953,7 @@ - + Save page to dxf Сохранить лист в DXF формате @@ -923,12 +1033,12 @@ Update CosmeticLine - Обновить Вспомогательную Линию + Обновить вспомогательную линию Create Detail View - Create Detail View + Создать выносной элемент @@ -938,12 +1048,12 @@ Create Leader - Создать Линию-выноску + Создать выноску Edit Leader - Править Линию-выноску + Править выноску @@ -973,17 +1083,17 @@ Create WeldSymbol - Создать Знак сварных соединений + Создать знак сварного соединения Edit WeldSymbol - Править Знак сварных соединений + Редактировать знак сварных соединений Add Cosmetic Vertex - Добавить Вспомогательную Вершину + Добавить вспомогательную вершину @@ -1267,7 +1377,7 @@ Select one Clip group and one View. - Выберите группу сечений и один вид. + Выберите одну группу и один Вид. @@ -1277,7 +1387,7 @@ Select exactly one Clip group. - Выберите ровно одну группу срезов. + Вы можете выбрать только одну группу. @@ -1617,7 +1727,7 @@ You must select 2 Vertexes or an existing CenterLine. - Вы должны выбрать 2 Вершины или существующую ОсевуюЛинию. + Вы должны выбрать 2 вершины или существующую осевую линию. @@ -1637,7 +1747,7 @@ Selection is not a Cosmetic Line. - Выделение не является Вспомогательной Линией. + Выделенный объект не является вспомогательной линией. @@ -1662,7 +1772,7 @@ Select exactly one Leader line or one Weld symbol. - Выберите только одну Указательную линию или один символ Сварки. + Выберите только одну линию-выноску или один знак сварки. @@ -1752,28 +1862,28 @@ Не возможно определить правильную страницу. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Все файлы (*.*) - + Export Page As PDF Экспорт листа в PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Экспорт листа в SVG @@ -1807,7 +1917,7 @@ Edit Leader Line - Править Линию-выноску + Править линию-выноску @@ -1870,12 +1980,12 @@ Create Welding Symbol - Создать Знак сварного соединения + Создать знак сварного соединения Edit Welding Symbol - Править Знак сварного соединения + Редактировать знак сварного соединения @@ -1885,17 +1995,17 @@ Edit Cosmetic Line - Изменить Вспомогательную Линию + Изменить вспомогательную линию New Detail View - Новый подробный вид + Новый выносной элемент Edit Detail View - Изменить детальный вид + Править выносной элемент @@ -1905,18 +2015,72 @@ Edit %1 Редактировать %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Вы не можете удалить эту размерную линию, потому что она содержит символ сварки, который может быть повреждён. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Зависимости объектов @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Вы не можете удалить этот вид, потому что он имеет вид сечения, который будет нарушен. - + You cannot delete this view because it has a detail view that would become broken. - Вы не можете удалить этот вид, потому что он имеет подробный вид, который будет нарушен. + Вы не можете удалить этот вид, потому что он имеет выносной элемент, который будет нарушен. - + You cannot delete this view because it has a leader line that would become broken. Невозможно удалить этот вид, так как он имеет линию выноски, которая может быть разорвана. @@ -1966,8 +2130,7 @@ following referencing objects might be lost: The group cannot be deleted because its items have the following section or detail views, or leader lines that would get broken: - Группа не может быть удалена, потому что её элементы имеют следующие -сечения или подробные виды, или размерные линии, которые могут быть повреждены: + Группа не может быть удалена, потому что её элементы имеют сечения или выносные элементы, или размерные линии, которые могут быть повреждены: @@ -2274,7 +2437,7 @@ Then you need to increase the tile limit. Dump intermediate results during Detail view processing - Дамп промежуточных результатов во время обработки Подробного вида + Дамп промежуточных результатов во время обработки выносного элемента @@ -2331,7 +2494,7 @@ when hatching a face with a PAT pattern Line End Cap Shape - Форма конца линии + Внешний вид краев линий @@ -2371,7 +2534,7 @@ can be a performance penalty in complex models. Dimension Format - Формат размера + Шаблон для формирования значения размера @@ -2414,7 +2577,7 @@ Each unit is approx. 0.1 mm wide Center Line Style - Стиль Осевой линии + Внешний вид осевой линии @@ -2466,7 +2629,7 @@ Each unit is approx. 0.1 mm wide Section Line Standard - Стандартная линия сечения + Линия сечения по умолчанию @@ -2521,7 +2684,7 @@ Each unit is approx. 0.1 mm wide Shape of balloon annotations - Форма всплывающего примечания + Форма фигуры для выноски по умолчанию @@ -2562,7 +2725,7 @@ Each unit is approx. 0.1 mm wide Balloon Leader End - Форма Конца Выноски + Внешний вид стрелки выноски @@ -2592,7 +2755,7 @@ Each unit is approx. 0.1 mm wide Section Line Style - Стиль линии разреза + Внешний вид линии сечения @@ -2602,7 +2765,7 @@ Each unit is approx. 0.1 mm wide Show Center Marks - Показывать центр Меток + Отображать центральные метки @@ -2617,7 +2780,7 @@ Each unit is approx. 0.1 mm wide Detail View Outline Shape - Детальный вид формы контура + Форма контура выносного элемента @@ -2657,7 +2820,7 @@ Each unit is approx. 0.1 mm wide Print Center Marks - Печатать Центральные Метки + Отображать центральные метки при печати @@ -2667,7 +2830,7 @@ Each unit is approx. 0.1 mm wide Detail Highlight Style - Стиль Выделения Подробностей + Внешний вид подсветки Detail (Выносных элементов) @@ -2706,7 +2869,7 @@ Each unit is approx. 0.1 mm wide Preselected - Предварительно выбрано + Предварительный выбор @@ -2850,7 +3013,7 @@ Each unit is approx. 0.1 mm wide Standard and Style - ‎Стандарт и ‎‎стиль‎ + ‎Ориентировать стиль на стандарт @@ -2860,22 +3023,22 @@ Each unit is approx. 0.1 mm wide ISO Oriented - Ориентирован на ISO + ISO прямой ISO Referencing - Ссылка на ISO + ISO в виде выноски ASME Inlined - Интегрированный ASME + ASME внутри линии ASME Referencing - Ссылка на ASME + ASME в виде выноски @@ -2885,7 +3048,7 @@ Each unit is approx. 0.1 mm wide Use Global Decimals - Использовать глобальную десятичную точность + Брать количество знаков после запятой из глобальных настроек @@ -2907,17 +3070,17 @@ Multiplier of 'Font Size' Show Units - Показать единицы + Указывать единицы измерений в размерах Alternate Decimals - Альтернативные десятичные + Количество знаков после запятой Number of decimals if 'Use Global Decimals' is not used - Количество десятичных разрядов, если ' Use Global Decimal' не используется + Количество знаков после запятой, если они не взяты 'из глобальных настроек' @@ -2937,7 +3100,7 @@ Multiplier of 'Font Size' Character used to indicate diameter dimensions - Символ, используемый для указания размеров диаметра + Символ, применяемый для указания диаметра @@ -2947,17 +3110,17 @@ Multiplier of 'Font Size' Arrow Style - Стиль стрелки + Внешний вид стрелок Arrowhead style - Стиль вершины стрелки + Внешний вид стрелок на окончаниях размеров Arrow Size - Размер стрелки + Длина стрелок размерных линий @@ -3015,7 +3178,7 @@ This can slow down the response time. Keep Page Up To Date - Поддерживать актуальность страниц + Автоматический обновлять чертеж при обновлении модели @@ -3044,7 +3207,7 @@ for ProjectionGroups Label Font* - Шрифт Надписей* + Шрифт надписей* @@ -3064,27 +3227,27 @@ for ProjectionGroups Conventions - Conventions + Настройки проецирования Projection Group Angle - Projection Group Angle + Система координат прямоугольного проецирования Use first- or third-angle multiview projection convention - Use first- or third-angle multiview projection convention + Используйте First-angle projection - для проецирования по ГОСТ и европейского способа проецирования или Third-angle projection - для американского способа проецирования (горизонтальная проекция выше фронтальной) First - First + ГОСТ/Европа (First-angle projection) Third - Third + Американский (Third-angle projection) @@ -3094,12 +3257,12 @@ for ProjectionGroups Hidden Line Style - Стиль Скрытой Линии + Внешний вид скрытых линий Style for hidden lines - Стиль скрытых линий + Определяет внешний вид скрытых линий @@ -3159,12 +3322,12 @@ for ProjectionGroups Welding Directory - Папка для сварки + Папка знаков обозначения сварочных швов Default directory for welding symbols - Каталог символов сварки по умолчанию + Папка по умолчанию, содержащая знаки условных обозначений сварочных швов @@ -3179,7 +3342,7 @@ for ProjectionGroups Pattern Name - Имя шаблона + Название шаблона по умолчанию @@ -3218,7 +3381,7 @@ for ProjectionGroups Show Seam Lines - Показать Линии Шва + Отображать линии шва @@ -3229,18 +3392,18 @@ for ProjectionGroups Show Smooth Lines - Показать Сглаженные Линии + Отображать сглаженные линии Show hard and outline edges (always shown) - Показать жесткие и контурные края (всегда показаны) + Отображать жесткие и контурные края (всегда показаны) Show Hard Lines - Показать жесткие линии + Отображать Hard линии @@ -3262,17 +3425,17 @@ Fast, but result is a collection of short straight lines. Show UV ISO Lines - Показать линии UV ISO + Отображать линии UV ISO Show hidden smooth edges - Показать скрытые сглаженные рёбра + Отображать скрытые сглаженные рёбра Show hidden seam lines - Показать скрытые линии шва + Отображать скрытые линии шва @@ -3401,12 +3564,12 @@ Fast, but result is a collection of short straight lines. Welding Symbol Scale - Масштаб символа сварки + Масштаб знака сварки Multiplier for size of welding symbols - Множитель для размера символов сварки + Множитель для размера знаков сварки @@ -3442,51 +3605,51 @@ Fast, but result is a collection of short straight lines. Экспортировать в PDF - + Different orientation Отличающаяся ориентация - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер использует отличающуюся от чертежа ориентацию бумаги. Хотите продолжить? - + Different paper size Отличающийся формат листа - + The printer uses a different paper size than the drawing. Do you want to continue? Принтер использует отличающийся от чертежа формат листа. Хотите продолжить? - + Opening file failed Ошибка при открытии файла - + Can not open file %1 for writing. Не удалось открыть файл %1 для записи. - + Save Dxf File Сохранить DXF файл - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Выбрано: @@ -3877,7 +4040,7 @@ Do you want to continue? Cosmetic Line - Вспомогательная Линия + Вспомогательная линия @@ -3930,7 +4093,7 @@ Do you want to continue? Detail View - Подробный вид + Выносной элемент @@ -3945,12 +4108,12 @@ Do you want to continue? scale factor for detail view - масштаб для подробного вида + масштаб для выносного элемента size of detail view - размер подробного вида + размер выносного элемента @@ -4181,22 +4344,22 @@ be used instead if the dimension value ISO Oriented - Ориентирован на ISO + ISO прямой ISO Referencing - Ссылка на ISO + ISO в виде выноски ASME Inlined - Интегрированный ASME + ASME внутри линии ASME Referencing - Ссылка на ASME + ASME в виде выноски @@ -4232,7 +4395,7 @@ be used instead if the dimension value Pattern Name - Имя шаблона + Название шаблона по умолчанию @@ -4582,7 +4745,7 @@ You can pick further points to get line segments. First or Third Angle - Первый или третий угол + First-angle projection или Third-angle projection @@ -5054,7 +5217,7 @@ using the given X/Y Spacing Adds a Centerline between 2 Lines - Добавить ОсевуюЛинию между 2 Линиями + Добавить осевую линию между 2 линиями @@ -5062,7 +5225,7 @@ using the given X/Y Spacing Adds a Centerline between 2 Points - Добавить ОсевуюЛинию между 2 Точками + Добавить осевую линию между 2 точками @@ -5086,7 +5249,7 @@ using the given X/Y Spacing Insert Horizontal Extent Dimension - Вставить Горизонтальный размер габарита + Указать горизонтальный габаритный размер @@ -5110,7 +5273,7 @@ using the given X/Y Spacing Insert Vertical Extent Dimension - Вставить Вертикальный размер габарита + Указать вертикальный габаритный размер @@ -5128,12 +5291,12 @@ using the given X/Y Spacing Add Lines - Добавить Линии + Добавить линии Add Vertices - Добавить Вершины + Добавить вершины diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm index 5c3c5c182e..b2fd87d44c 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index c0927acd6f..9702b0c887 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -367,6 +367,116 @@ Izvozi stran kot SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TehRisanje + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TehRisanje + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TehRisanje + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TehRisanje + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TehRisanje + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Shrani stran kot DXF @@ -1752,28 +1862,28 @@ Ni mogoče določiti pravilne strani. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Vse datoteke (*.*) - + Export Page As PDF Izvozi stran v PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvozi stran kot SVG @@ -1905,18 +2015,72 @@ Edit %1 Uredi %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Te opisnične črte ne morete izbrisati, ker vsebuje oznako za varjenje, ki bi postala okvarjena. - + @@ -1925,9 +2089,9 @@ oznako za varjenje, ki bi postala okvarjena. - - - + + + Object dependencies Odvisnosti predmetov @@ -1939,19 +2103,19 @@ oznako za varjenje, ki bi postala okvarjena. - + You cannot delete this view because it has a section view that would become broken. Tega pogleda ne morete izbrisati, ker vsebuje prerezni pogled, ki bi postal okvarjen. - + You cannot delete this view because it has a detail view that would become broken. Tega pogleda ne morete izbrisati, ker vsebuje podrobni pogled, ki bi postal okvarjen. - + You cannot delete this view because it has a leader line that would become broken. Tega pogleda ne morete izbrisati, ker vsebuje opisnično črto, ki bi postala okvarjena. @@ -3444,51 +3608,51 @@ Hitro, vendar dobimo skupek kratkih ravnih črtic. Izvoz PDF - + Different orientation Druga usmerjenost - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskalnik uporablja drugo usmerjenost kot risba. Ali želite nadaljevati? - + Different paper size Druga velikost papirja - + The printer uses a different paper size than the drawing. Do you want to continue? Tiskalnik uporablja drugo velikost papirja kot risba. Ali želite nadaljevati? - + Opening file failed Odpiranje datoteke ni uspelo - + Can not open file %1 for writing. Datoteke %1 ni mogoče odpreti za pisanje. - + Save Dxf File Shrani datoteko DXF - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Izbrano: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm index b18db1c45f..6035ba0475 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 29c02bace8..dad5702d41 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -367,6 +367,116 @@ Exportera sida som SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Spara sida på dxf @@ -1752,28 +1862,28 @@ Kan inte fastställa korrekt sida. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Alla filer (*.*) - + Export Page As PDF Exportera sida som PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportera sida som SVG @@ -1905,18 +2015,72 @@ Edit %1 Redigera %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Du kan inte ta bort den här ledarlinjen eftersom den har en svetssymbol som skulle bli trasig. - + @@ -1925,9 +2089,9 @@ den har en svetssymbol som skulle bli trasig. - - - + + + Object dependencies Objektberoenden @@ -1939,19 +2103,19 @@ den har en svetssymbol som skulle bli trasig. - + You cannot delete this view because it has a section view that would become broken. Du kan inte ta bort den här vyn eftersom den har en avsnittsvy som skulle bli bruten. - + You cannot delete this view because it has a detail view that would become broken. Du kan inte ta bort den här vyn eftersom den har en detaljvy som skulle bli bruten. - + You cannot delete this view because it has a leader line that would become broken. Du kan inte ta bort den här vyn eftersom den har en uttrÃ¥ttlinje som skulle bli bruten. @@ -3445,50 +3609,50 @@ Snabbt, men resultatet är en samling korta raka linjer. Exportera PDF - + Different orientation Annan orientering - + The printer uses a different orientation than the drawing. Do you want to continue? Skrivaren använder en annan orientering än ritningen. Vill du fortsätta? - + Different paper size Annan pappersstorlek - + The printer uses a different paper size than the drawing. Do you want to continue? Skrivaren använder en annan pappersstorlek än ritningen. Vill du fortsätta? - + Opening file failed Fel vid filöppning - + Can not open file %1 for writing. Kan inte öppna fil %1 i skrivläge. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Vald: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm index 55f2a7ee2d..91143fbe52 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index 38ffb401a8..3abd7e9388 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -367,6 +367,116 @@ Sayfa SVG olarak dışa aktar + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TeknikÇizim + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TeknikÇizim + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TeknikÇizim + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TeknikÇizim + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TeknikÇizim + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Sayfayı dxf olarak kaydedin @@ -1752,28 +1862,28 @@ Doğru sayfa belirlenemiyor. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tüm dosyalar (*. *) - + Export Page As PDF Sayfayı PDF olarak dışa aktar - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Sayfayı SVG olarak dışa aktar @@ -1905,17 +2015,71 @@ Edit %1 %1'i düzenle + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. Bu ölçü çizgisini silemezsiniz çünkü bozulabilecek bir kaynak sembolü içeriyor. - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Nesne bağımlılıkları @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. Bu görünüşü silemezsiniz çünkü bozulabilecek bir kesit görünümü içeriyor. - + You cannot delete this view because it has a detail view that would become broken. Bu görünüşü silemezsiniz çünkü bozulabilecek bir ayrıntı görünümü içeriyor. - + You cannot delete this view because it has a leader line that would become broken. Bu görünüşü silemezsiniz çünkü bozulabilecek bir ölçü çizgisi içeriyor. @@ -3440,50 +3604,50 @@ Hızlıdır ama sonucu, kısa düz çizgilerin derlemesidir. PDF olarak dışa aktar - + Different orientation Ekran yönü - + The printer uses a different orientation than the drawing. Do you want to continue? Yazıcı çizim daha farklı bir yönelim kullanır. Devam etmek istiyor musunuz? - + Different paper size Farklı kağıt boyutu - + The printer uses a different paper size than the drawing. Do you want to continue? Yazıcı, çizimden farklı bir kağıt boyutu kullanıyor. Devam etmek istiyor musun? - + Opening file failed Dosya açılamadı - + Can not open file %1 for writing. %1 dosyasını yazmak için açamazsın. - + Save Dxf File Dxf dosyasını kaydet - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seçili: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm index fb727691c3..1feb9de1a2 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 70562ec2df..3705ff1e08 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -367,6 +367,116 @@ Експортувати лист у SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + ТехМалюнок + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + ТехМалюнок + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + ТехМалюнок + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + ТехМалюнок + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + ТехМалюнок + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Зберегти сторінку в dxf файл @@ -1752,28 +1862,28 @@ Can not determine correct page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Всі файли (*.*) - + Export Page As PDF Експорт в PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Експорт в SVG @@ -1905,18 +2015,72 @@ Edit %1 Редагувати %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Залежності об'єктів @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. Експорт в PDF - + Different orientation Відмінна орієнтація - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер використовує відмінну від креслення орієнтацію. Бажаєте продовжити? - + Different paper size Відмінний розмір паперу - + The printer uses a different paper size than the drawing. Do you want to continue? Принтер використовує відмінний від креслення розмір паперу. Бажаєте продовжити? - + Opening file failed Відкриття файлу не вдалося - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Зберегти файл Dxf - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Вибрано: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm index d614d0d751..a1c8c73662 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index d144e29701..df2605324f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -367,6 +367,116 @@ Exportar una pàgina com a SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ No es pot determinar la pàgina correcta. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tots els fitxers (*.*) - + Export Page As PDF Exporta una pàgina com a PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar una pàgina com a SVG @@ -1905,18 +2015,72 @@ Edit %1 Edita %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Dependències de l'objecte @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. No podeu suprimir aquesta vista perquè conté una vista de secció que es trencaria. - + You cannot delete this view because it has a detail view that would become broken. No podeu suprimir aquesta vista perquè conté una vista de detall que es trencaria. - + You cannot delete this view because it has a leader line that would become broken. No podeu suprimir aquesta vista perquè conté una línia guia que es trencaria. @@ -3436,49 +3600,49 @@ Fast, but result is a collection of short straight lines. Exporta a PDF - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent de la del dibuix. Voleu continuar? - + Different paper size Mida de paper diferent - + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent de la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir el fitxer. - + Can not open file %1 for writing. No s'ha pogut obrir el fitxer %1 per a escriure-hi. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Seleccionat: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm index 51666b1818..fc696fb235 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts index 77a05cad12..c582742448 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_vi.ts @@ -367,6 +367,116 @@ Export Page as SVG + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + Vẽ Công nghệ + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + Vẽ Công nghệ + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + Vẽ Công nghệ + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + Vẽ Công nghệ + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + Vẽ Công nghệ + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Không thể xác định đúng trang. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) Tất cả các tệp (*.*) - + Export Page As PDF Xuất trang dưới dạng DXF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Xuất trang dưới dạng SVG @@ -1905,18 +2015,72 @@ Edit %1 Chỉnh sửa %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies Phụ thuộc đối tượng @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,51 +3609,51 @@ Fast, but result is a collection of short straight lines. Xuất tệp PDF - + Different orientation Định hướng khác nhau - + The printer uses a different orientation than the drawing. Do you want to continue? Máy in sử dụng hướng khác với bản vẽ. Bạn có muốn tiếp tục? - + Different paper size Kích thước giấy khác nhau - + The printer uses a different paper size than the drawing. Do you want to continue? Máy in sử dụng kích cỡ giấy khác so với bản vẽ. Bạn có muốn tiếp tục? - + Opening file failed Không thể mở tệp - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: Đã chọn: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm index 5b55497162..4248c8beb7 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index 28b2e1a354..c31a90c2fe 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -367,6 +367,116 @@ 以SVG格式导出页面 + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + 制图 + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + 制图 + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + 制图 + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + 制图 + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + 制图 + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf 保存页面到 dxf @@ -1752,28 +1862,28 @@ 无法确定正确的页面。 - + PDF (*.pdf) PDF (* pdf) - - + + All Files (*.*) 所有文件(*.*) - + Export Page As PDF 以 PDF 格式导出页面 - + SVG (*.svg) SVG (*.svg) - + Export page as SVG 以 SVG格式导出页面 @@ -1905,17 +2015,71 @@ Edit %1 编辑 %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. 指引线 - + @@ -1924,9 +2088,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies 对象依赖关系 @@ -1938,19 +2102,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. 您不能删除此视图，因为它有一个指引线会被损坏。 @@ -3444,49 +3608,49 @@ Fast, but result is a collection of short straight lines. 导出PDF - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 打印机和图纸使用了不同的定位位置。你想要继续吗？ - + Different paper size 不同的图纸大小 - + The printer uses a different paper size than the drawing. Do you want to continue? 打印机和当前图纸使用了不同大小的图纸，是否继续？ - + Opening file failed 打开文件失败 - + Can not open file %1 for writing. 无法打开文件“%1”进行写入。 - + Save Dxf File 保存为 Dxf 文件 - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 已选择: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm index be64393744..17cd81ac35 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index 386111d3e7..fcab9e49ff 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -367,6 +367,116 @@ 滙出為SVG檔 + + CmdTechDrawExtensionCircleCenterLines + + + TechDraw + TechDraw + + + + Draw circle center lines + Draw circle center lines + + + + Draw circle center line cross at circles + - select many circles or arcs + - click this button + Draw circle center line cross at circles + - select many circles or arcs + - click this button + + + + CmdTechDrawExtensionThreadBoltBottom + + + TechDraw + TechDraw + + + + Cosmetic thread bolt bottom view + Cosmetic thread bolt bottom view + + + + Draw cosmetic screw thread ground view + - select many circles + - click this button + Draw cosmetic screw thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadBoltSide + + + TechDraw + TechDraw + + + + Cosmetic thread bolt side view + Cosmetic thread bolt side view + + + + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + Draw cosmetic screw thread side view + - select two parallel lines + - click this button + + + + CmdTechDrawExtensionThreadHoleBottom + + + TechDraw + TechDraw + + + + Cosmetic thread hole bottom view + Cosmetic thread hole bottom view + + + + Draw cosmetic hole thread ground view + - select many circles + - click this button + Draw cosmetic hole thread ground view + - select many circles + - click this button + + + + CmdTechDrawExtensionThreadHoleSide + + + TechDraw + TechDraw + + + + Cosmetic thread hole side view + Cosmetic thread hole side view + + + + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + Draw cosmetic thread hole side view + - select two parallel lines + - click this button + + CmdTechDrawExtentGroup @@ -843,7 +953,7 @@ - + Save page to dxf Save page to dxf @@ -1752,28 +1862,28 @@ Can not determine correct page. - + PDF (*.pdf) PDF (*.pdf) - - + + All Files (*.*) 所有檔 (*.*) - + Export Page As PDF Export Page As PDF - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG @@ -1905,18 +2015,72 @@ Edit %1 Edit %1 + + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + + + + + + + + Selection is empty + Selection is empty + + + + + + + + No object selected + No object selected + + + + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + + + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + + + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + + + + + TechDraw Tread Bolt Bottom + TechDraw Tread Bolt Bottom + + + + Please select two straight lines + Please select two straight lines + Std_Delete - + You cannot delete this leader line because it has a weld symbol that would become broken. You cannot delete this leader line because it has a weld symbol that would become broken. - + @@ -1925,9 +2089,9 @@ it has a weld symbol that would become broken. - - - + + + Object dependencies 物件相依 @@ -1939,19 +2103,19 @@ it has a weld symbol that would become broken. - + You cannot delete this view because it has a section view that would become broken. You cannot delete this view because it has a section view that would become broken. - + You cannot delete this view because it has a detail view that would become broken. You cannot delete this view because it has a detail view that would become broken. - + You cannot delete this view because it has a leader line that would become broken. You cannot delete this view because it has a leader line that would become broken. @@ -3445,49 +3609,49 @@ Fast, but result is a collection of short straight lines. 匯出 PDF - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 印表機與圖面使用之方向不同，您要繼續嗎？ - + Different paper size 紙張尺寸不同 - + The printer uses a different paper size than the drawing. Do you want to continue? 印表機與圖面之紙張尺寸不同，您要繼續嗎？ - + Opening file failed 開啟檔案失敗 - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save Dxf File Save Dxf File - + Dxf (*.dxf) Dxf (*.dxf) - + Selected: 已選： diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts index a8e2e069ed..ed61b139bd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ar.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ar.ts @@ -128,7 +128,7 @@ QObject - + Browser المتصفح diff --git a/src/Mod/Web/Gui/Resources/translations/Web_bg.ts b/src/Mod/Web/Gui/Resources/translations/Web_bg.ts index 90ec5d84fd..7150f8ce42 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_bg.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_bg.ts @@ -128,7 +128,7 @@ QObject - + Browser Браузър diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts index 843ddce8c4..ec69eb4157 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ca.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ca.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts index 97641b21a2..434e4d5c09 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts @@ -128,7 +128,7 @@ QObject - + Browser Prohlížeč diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.ts b/src/Mod/Web/Gui/Resources/translations/Web_de.ts index 751c9449c0..ebe5c86a57 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_de.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_de.ts @@ -128,7 +128,7 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_el.ts b/src/Mod/Web/Gui/Resources/translations/Web_el.ts index a2bef1048e..bf5add0ee5 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_el.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_el.ts @@ -128,7 +128,7 @@ QObject - + Browser Περιηγητής diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts index 0015a479c9..bd870a52dd 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-AR.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts index 64edb95b6d..6c85bc02eb 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts index 449f593329..1688bfe3f2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_eu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_eu.ts @@ -128,7 +128,7 @@ QObject - + Browser Nabigatzailea diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts index 9bdf0f86f3..c071e59be4 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts @@ -128,7 +128,7 @@ QObject - + Browser Selain diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fil.ts b/src/Mod/Web/Gui/Resources/translations/Web_fil.ts index 7c98581d2e..12a36ac28e 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fil.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fil.ts @@ -128,7 +128,7 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts index e9e892c126..6788ca784f 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts @@ -128,7 +128,7 @@ QObject - + Browser Navigateur diff --git a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts index 934a27a2af..56facf8091 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_gl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_gl.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts index 5d5c63d3f0..4f7228428c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts @@ -128,7 +128,7 @@ QObject - + Browser Preglednik diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts index f33d7be4a8..677a70c1f9 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts @@ -128,7 +128,7 @@ QObject - + Browser Böngésző diff --git a/src/Mod/Web/Gui/Resources/translations/Web_id.ts b/src/Mod/Web/Gui/Resources/translations/Web_id.ts index 19ce8b60c0..8e2aec616a 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_id.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_id.ts @@ -128,7 +128,7 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.ts b/src/Mod/Web/Gui/Resources/translations/Web_it.ts index 5176851794..b0651658c8 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_it.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_it.ts @@ -128,7 +128,7 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts index 61c05d9d1c..738cb53ab2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts @@ -128,7 +128,7 @@ QObject - + Browser ブラウザー diff --git a/src/Mod/Web/Gui/Resources/translations/Web_lt.ts b/src/Mod/Web/Gui/Resources/translations/Web_lt.ts index d5fd51b139..54d8f49d63 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_lt.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_lt.ts @@ -128,7 +128,7 @@ QObject - + Browser Naršyklė diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts index 5bf23ac000..9ea9de631d 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts @@ -128,7 +128,7 @@ QObject - + Browser Browser diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts index e403622d4f..849cdb6b34 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts @@ -128,7 +128,7 @@ QObject - + Browser Przeglądarka diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts index 88a1c9f775..971f56bf09 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts index 9c2f61388f..c423e8742c 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts index 775515f309..a24b7d21a0 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts @@ -128,7 +128,7 @@ QObject - + Browser Navigator diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts index a34a20f11d..31b292981f 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts @@ -128,7 +128,7 @@ QObject - + Browser Браузер diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts index 6801d0e3df..b27a204744 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sl.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sl.ts @@ -128,7 +128,7 @@ QObject - + Browser Brskalnik diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts index fb3e5c4e49..327a3a460d 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts @@ -128,7 +128,7 @@ QObject - + Browser Webbläsare diff --git a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts index 7c27910864..b42a019f17 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_tr.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_tr.ts @@ -128,7 +128,7 @@ QObject - + Browser Tarayıcı diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts index 705634ecad..f29e42dfec 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts @@ -128,7 +128,7 @@ QObject - + Browser Браузер diff --git a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts index 6fa8d76d98..7034b968e0 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_val-ES.ts @@ -128,7 +128,7 @@ QObject - + Browser Navegador diff --git a/src/Mod/Web/Gui/Resources/translations/Web_vi.ts b/src/Mod/Web/Gui/Resources/translations/Web_vi.ts index 5e34732c10..4e46d6a7fa 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_vi.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_vi.ts @@ -128,7 +128,7 @@ QObject - + Browser Trình duyệt diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts index d3ba75d539..d952e7c1d2 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts @@ -128,7 +128,7 @@ QObject - + Browser 浏览器 diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts index fe9a8bed15..f0e78ad26a 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts @@ -128,7 +128,7 @@ QObject - + Browser 瀏覽器