From 81a44fcccbd6b38ed29702edbd9277f02aec6420 Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Tue, 11 May 2021 13:05:20 +0200 Subject: [PATCH] Updated ts files --- src/Gui/Language/FreeCAD.ts | 112 +- .../Resources/translations/AddonManager.ts | 108 +- src/Mod/Arch/Resources/translations/Arch.ts | 940 +++---- src/Mod/Draft/Resources/translations/Draft.ts | 1039 ++++---- .../Gui/Resources/translations/Drawing.ts | 212 +- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 25 + .../Mesh/Gui/Resources/translations/Mesh.ts | 22 +- .../Gui/Resources/translations/MeshPart.ts | 6 +- .../Resources/translations/OpenSCAD.ts | 58 +- .../Part/Gui/Resources/translations/Part.ts | 36 +- .../Gui/Resources/translations/PartDesign.ts | 2295 ++++++++++++----- .../Path/Gui/Resources/translations/Path.ts | 170 +- .../Gui/Resources/translations/Raytracing.ts | 124 +- .../Robot/Gui/Resources/translations/Robot.ts | 2 +- .../Gui/Resources/translations/Sketcher.ts | 2203 ++++++++-------- .../Gui/Resources/translations/Spreadsheet.ts | 64 +- .../Gui/Resources/translations/StartPage.ts | 214 +- .../Gui/Resources/translations/TechDraw.ts | 163 +- .../Test/Gui/Resources/translations/Test.ts | 46 +- src/Mod/Web/Gui/Resources/translations/Web.ts | 22 +- 20 files changed, 4572 insertions(+), 3289 deletions(-) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 9196374fda..72d75d33f6 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -276,6 +276,17 @@ + + ExpressionLabel + + Enter an expression... + + + + Expression: + + + Gui::AccelLineEdit @@ -464,14 +475,6 @@ while doing a left or right click and move the mouse up or down Word size - - Credits - - - - FreeCAD would be nowhere without their efforts: - - License @@ -495,6 +498,25 @@ while doing a left or right click and move the mouse up or down Collection + + Credits + Header for the Credits tab of the About screen + + + + FreeCAD would not be possible without the contributions of + + + + Individuals + Header for the list of individual people in the Credits list. + + + + Organizations + Header for the list of companies/organizations in the Credits list. + + Gui::Dialog::ButtonModel @@ -1358,10 +1380,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces - - Code lines will be numbered - - Pressing <Tab> will insert amount of defined indent size @@ -1398,6 +1416,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Color: + + Code lines will be numbered + + Gui::Dialog::DlgGeneral @@ -2494,10 +2516,6 @@ but slower response to any scene changes. Centralized - - What kind of multisample anti-aliasing is used - - Transparent objects: @@ -2522,12 +2540,6 @@ but slower response to any scene changes. Eye to eye distance for stereo modes - - Eye-to-eye distance used for stereo projections. -The specified value is a factor that will be multiplied with the -bounding box size of the 3D object that is currently displayed. - - Backlight is enabled with the defined color @@ -2581,6 +2593,16 @@ Changing this option requires a restart of the application. Use software OpenGL + + What kind of multisample anti-aliasing is used + + + + Eye-to-eye distance used for stereo projections. +The specified value is a factor that will be multiplied with the +bounding box size of the 3D object that is currently displayed. + + Gui::Dialog::DlgSettings3DViewImp @@ -3184,10 +3206,6 @@ You can also use the form: John Doe <john@doe.com> Framebuffer (as is) - - Pixel buffer - - Gui::Dialog::DlgSettingsLazyLoaded @@ -3421,11 +3439,6 @@ The value is the diameter of the sphere to fit on the screen. Zoom step - - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. - - Direction of zoom operations will be inverted @@ -3512,6 +3525,27 @@ Mouse tilting is not disabled by this setting. Object center + + Rotates to nearest possible state when clicking a cube face + + + + Rotate to nearest + + + + Cube size + + + + Size of the navigation cube + + + + How much will be zoomed. +Zoom step of '1' means a factor of 7.5 for every zoom step. + + Gui::Dialog::DlgSettingsSelection @@ -3821,11 +3855,11 @@ The preference system is the one set in the general preferences. Gui::Dialog::DlgUnitsCalculator - unknown unit: + unit mismatch - unit mismatch + unknown unit: @@ -6792,12 +6826,6 @@ Please check report view for more... - -Pyhsical path: - - - - Document: @@ -6826,6 +6854,12 @@ Document: Workbenches + + + +Physical path: + + SelectionFilter diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index 28937f59c7..4c4509c1eb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -3,7 +3,7 @@ AddonInstaller - + Installed location @@ -21,257 +21,257 @@ - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... - + Apply - + update(s) - + No update available - + Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install - + Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon - + Macro successfully removed. - + Macro could not be removed. - + Unable to download addon list. - + Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. - + Retrieving description... - + Retrieving info from - + An update is available for this addon. - + This addon is already installed. - + Retrieving info from git - + Retrieving info from wiki - + GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench - + Missing python module - + Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench - + Please install the missing components first. - + Error: Unable to download - + Successfully installed - + GitPython not installed! Cannot retrieve macros from git - + Installed - + Update available - + Restart required - + This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed - + Python Markdown library is missing. @@ -410,12 +410,12 @@ to be scanned for available addons Std_AddonMgr - + &Addon manager - + Manage external workbenches and macros diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index ec0c86609a..1cbfa1309a 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -33,112 +33,112 @@ - + The base object this component is built upon - + The object this component is cloning - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object - + An optional description for this component - + An optional tag for this component - + A material for this object - + Specifies if this object must move together when its host is moved - + The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane - + The perimeter length of the horizontal area - + The model description of this equipment - + Additional snap points for this equipment - + The electric power needed by this equipment in Watts - + The height of this object - + The computed floor area of this floor - + The placement of this object - + The profile used to build this frame - + Specifies if the profile must be aligned with the extrusion wires - + An offset vector between the base sketch and the frame - + Crossing point of the path on the profile. - + The rotation of the profile around its extrusion axis @@ -293,167 +293,167 @@ - + The diameter of this pipe, if not based on a profile - + The length of this pipe, if not based on an edge - + An optional closed profile to base this pipe on - + Offset from the start point - + Offset from the end point - + The curvature radius of this connector - + The pipes linked by this connector - + The type of this connector - + The length of this element - + The width of this element - + The height of this element - + The structural nodes of this element - + The size of the chamfer of this element - + The dent length of this element - + The dent height of this element - + The dents of this element - + The chamfer length of this element - + The base length of this element - + The groove depth of this element - + The groove height of this element - + The spacing between the grooves of this element - + The number of grooves of this element - + The dent width of this element - + The type of this slab - + The size of the base of this element - + The number of holes in this element - + The major radius of the holes of this element - + The minor radius of the holes of this element - + The spacing between the holes of this element - + The length of the down floor of this element - + The number of risers in this element - + The riser height of this element - + The tread depth of this element @@ -503,37 +503,37 @@ - + The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars - + The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -568,132 +568,132 @@ - + If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane - + The display height of this section plane - + The size of the arrows of this section plane - + Show the cut in the 3D view - + The rendering mode to use - + If cut geometry is shown or not - + If cut geometry is filled or not - + The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site - + The postal or zip code of this site - + The city of this site - + The country of this site - + The latitude of this site - + Angle between the true North and the North direction in this document - + The elevation of level 0 of this site - + The perimeter length of this terrain - + The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape - + Show solar diagram or not - + The scale of the solar diagram - + The position of the solar diagram - + The color of the solar diagram @@ -768,7 +768,7 @@ - + The name of the font @@ -778,7 +778,7 @@ - + The size of the text font @@ -813,77 +813,77 @@ - + The length of these stairs, if no baseline is defined - + The width of these stairs - + The total height of these stairs - + The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs - + The depth of the treads of these stairs - + The height of the risers of these stairs - + The size of the nosing - + The thickness of the treads - + The type of landings of these stairs - + The type of winders in these stairs - + The type of structure of these stairs - + The thickness of the massive structure or of the stringers - + The width of the stringers - + The offset between the border of the stairs and the structure @@ -988,12 +988,12 @@ - + An optional higher-resolution mesh or shape for this object - + An optional additional placement to add to the profile before extruding it @@ -1003,12 +1003,12 @@ - + A standard code (MasterFormat, OmniClass,...) - + A description for this material @@ -1023,37 +1023,37 @@ - + The list of layer names - + The list of layer materials - + The list of layer thicknesses - + The line color of the projected objects - + The color of the cut faces (if turned on) - + The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic @@ -1078,17 +1078,17 @@ - + An optional axis or axis system on which this object should be duplicated - + The type of edges to consider - + If true, geometry is fused, otherwise a compound @@ -1123,27 +1123,27 @@ - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars - + The structure object that hosts this rebar - + The custom spacing of rebar - + Shape of rebar @@ -1208,82 +1208,82 @@ - + The level of the (0,0,0) point of this level - + The shape of this object - + The line width of this object - + An optional unit to express levels - + A transformation to apply to the level mark - + If true, show the level - + If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts - + The font size of texts - + Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click - + The individual face colors - + If set to True, the working plane will be kept on Auto mode - + An optional standard (OmniClass, etc...) code for this component - + The URL of the product page of this equipment @@ -1313,12 +1313,12 @@ - + Length of a single rebar - + Total length of all rebars @@ -1343,42 +1343,42 @@ - + The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object - + The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site - + A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates @@ -1388,50 +1388,35 @@ - + The width of a Landing (Second edge and after - First edge follows Width property) - + The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in - + The depth of the landing of these stairs - + The depth of the treads of these stairs - Enforced regardless of Length or edge's Length - + The height of the risers of these stairs - Enforced regardless of Height or edge's Height - + The direction of flight after landing - - - The 'absolute' top level of a flight of stairs leads to - - - - - The 'left outline' of stairs - - - - - The 'left outline' of all segments of stairs - - Enable this to make the wall generate blocks @@ -1528,37 +1513,37 @@ - + Specifies if moving this object moves its base instead - + A single section of the fence - + A single fence post - + The Path the fence should follow - + The number of sections the fence is built of - + The number of posts used to build the fence - + The type of this object @@ -1578,217 +1563,212 @@ - + If True, resulting views will be clipped to the section plane area. - + If true, the color of the objects material will be used to fill cut areas. - + When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - + The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation - + The thickness of the risers - - The 'right outline' of all segments of stairs - - - - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects - + The line color of child objects - + The shape color of child objects - + The transparency of child objects - + When true, the fence will be colored like the original post and section. - + If true, the height value propagates to contained objects - + This property stores an inventor representation for this object - + If true, display offset will affect the origin mark too - + If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled - + Cut the view above this level - + The distance between the level plane and the cut line - + Turn cutting on when activating this level - + Use the material color as this object's shape color, if available - + The number of vertical mullions - + If the profile of the vertical mullions get aligned with the surface or not - + The number of vertical sections of this curtain wall - + A profile for vertical mullions (disables vertical mullion size) - + The number of horizontal mullions - + If the profile of the horizontal mullions gets aligned with the surface or not - + The number of horizontal sections of this curtain wall - + A profile for horizontal mullions (disables horizontal mullion size) - + The number of diagonal mullions - + The size of the diagonal mullions, if any, if no profile is used - + A profile for diagonal mullions, if any (disables horizontal mullion size) - + The number of panels - + The thickness of the panels - + Swaps horizontal and vertical lines - + Perform subtractions between components so none overlap - + Centers the profile over the edges or not - + The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - + The wall thickness of this pipe, if not based on a profile @@ -1808,82 +1788,82 @@ - + The time zone where this site is located - + The angle of the truss - + The slant type of this truss - + The normal direction of this truss - + The height of the truss at the start position - + The height of the truss at the end position - + An optional start offset for the top strut - + An optional end offset for the top strut - + The height of the main top and bottom elements of the truss - + The width of the main top and bottom elements of the truss - + The type of the middle element of the truss - + The direction of the rods - + The diameter or side of the rods - + The number of rod sections - + If the truss has a rod at its endpoint or not - + How to draw the rods @@ -1903,52 +1883,52 @@ - + If True, double-clicking this object in the tree activates it - + An optional host object for this curtain wall - + The height of the curtain wall, if based on an edge - + The height of the vertical mullions profile, if no profile is used - + The width of the vertical mullions profile, if no profile is used - + The height of the horizontal mullions profile, if no profile is used - + The width of the horizontal mullions profile, if no profile is used - + An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one - + Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module - + The rebar mark @@ -1958,70 +1938,110 @@ - + The list of angles of the roof segments - + The list of horizontal length projections of the roof segments - + The list of IDs of the relative profiles of the roof segments - + The list of thicknesses of the roof segments - + The list of overhangs of the roof segments - + The list of calculated heights of the roof segments - + The face number of the base object used to build the roof - + The total length of the ridges and hips of the roof - + The total length of the borders of the roof - + Specifies if the direction of the roof should be flipped - + Show the label in the 3D view + + + The 'absolute' top level of a flight of stairs leads to + + + + + The 'left outline' of stairs + + + + + The 'left outline' of all segments of stairs + + + + + The 'right outline' of all segments of stairs + + + + + The thickness of the lower floor slab + + + + + The thickness of the upper floor slab + + + + + The type of connection between the lower slab and the start of the stairs + + + + + The type of connection between the end of the stairs and the upper floor slab + + Arch - + Components - + Components of this object @@ -2106,37 +2126,37 @@ - + Base component - + Additions - + Subtractions - + Objects - + Roof - + Create Roof - + Unable to create a roof @@ -2151,12 +2171,12 @@ - + Create Section Plane - + Create Site @@ -2171,12 +2191,12 @@ - + Width - + Height @@ -2191,42 +2211,42 @@ - + Edit - + Create/update component - + Base 2D object - + Wires - + Create new component - + Name - + Type - + Thickness @@ -2251,27 +2271,27 @@ - + Please select a base object - + Fixtures - + Frame - + Create Frame - + Create Rebar @@ -2281,12 +2301,12 @@ - + Create Stairs - + Length @@ -2321,7 +2341,7 @@ - + Error computing the shape of this object @@ -2346,57 +2366,57 @@ - + has no solid - + has an invalid shape - + has a null shape - + Cutting - + Create Equipment - + You must select exactly one base object - + The selected object must be a mesh - + This mesh has more than 1000 facets. - + This operation can take a long time. Proceed? - + The mesh has more than 500 facets. This will take a couple of minutes... - + Create 3 views @@ -2406,57 +2426,57 @@ - + Id - + IdRel - + Cut Plane - + Cut Plane options - + Behind - + Front - + Angle (deg) - + Run (mm) - + Thickness (mm) - + Overhang (mm) - + Height (mm) @@ -2511,12 +2531,12 @@ - + Group - + Create Floor @@ -2546,147 +2566,147 @@ - + Create Pipe - + Create Connector - + Precast elements - + Slab type - + Chamfer - + Dent length - + Dent width - + Dent height - + Slab base - + Number of holes - + Major diameter of holes - + Minor diameter of holes - + Spacing between holes - + Number of grooves - + Depth of grooves - + Height of grooves - + Spacing between grooves - + Number of risers - + Length of down floor - + Height of risers - + Depth of treads - + Precast options - + Dents list - + Add dent - + Remove dent - + Slant - + Level - + Rotation - + Offset @@ -2767,32 +2787,32 @@ - + Hinge - + Opening mode - + Get selected edge - + Press to retrieve the selected edge - + Which side to cut - + You must select a base shape object and optionally a mesh object @@ -2802,12 +2822,12 @@ - + Material - + New layer @@ -2817,12 +2837,12 @@ - + Hole wire - + Pick selected @@ -2917,7 +2937,7 @@ - + Window elements @@ -2967,7 +2987,7 @@ - + Hosts @@ -3002,12 +3022,12 @@ - + BuildingPart - + Create BuildingPart @@ -3027,62 +3047,62 @@ - + Toggle subcomponents - + Closing Sketch edit - + Component - + Edit IFC properties - + Edit standard code - + Property - + Add property... - + Add property set... - + New... - + New property - + New property set - + Crossing point not found in profile. @@ -3092,72 +3112,72 @@ - + Please select exactly 2 or 3 Pipe objects - + Please select only Pipe objects - + Unable to build the base path - + Unable to build the profile - + Unable to build the pipe - + The base object is not a Part - + Too many wires in the base shape - + The base wire is closed - + The profile is not a 2D Part - + The profile is not closed - + Only the 3 first wires will be connected - + Common vertex not found - + Pipes are already aligned - + At least 2 pipes must align @@ -3167,7 +3187,7 @@ - + Please select a base face on a structural object @@ -3177,37 +3197,37 @@ - + Section plane settings - + Objects seen by this section plane: - + Section plane placement: - + Rotate X - + Rotate Y - + Rotate Z - + Resize @@ -3262,27 +3282,27 @@ - + Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default - + If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here @@ -3342,42 +3362,42 @@ - + Remove highlighted objects from the list above - + Add selected - + Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis - + Rotates the plane along the Y axis - + Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above @@ -3497,32 +3517,32 @@ - + Curtain Wall - + Please select only one base object or none - + Create Curtain Wall - + Total thickness - + depends on the object - + Create Project @@ -3532,12 +3552,12 @@ - + Truss - + Create Truss @@ -3617,7 +3637,7 @@ - + Parameters of the roof profiles : * Angle : slope in degrees relative to the horizontal. * Run : horizontal distance between the wall and the ridge. @@ -3637,17 +3657,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + This window has no defined opening - + Invert opening direction - + Invert hinge position @@ -3670,7 +3690,7 @@ Building creation aborted. - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. @@ -3681,14 +3701,14 @@ Note: You can change that in the preferences. - + There is no valid object in the selection. Site creation aborted. - + You can put anything but the following objects: Site, Building, and Floor - in a Floor object. Floor object is not allowed to accept Site, Building, or Floor objects. @@ -3699,7 +3719,7 @@ You can change that in the preferences. - + There is no valid object in the selection. Floor creation aborted. @@ -3817,12 +3837,12 @@ Floor creation aborted. Arch_3Views - + 3 views from mesh - + Creates 3 views (top, front, side) from a mesh-based object @@ -3900,12 +3920,12 @@ Floor creation aborted. Arch_BuildingPart - + BuildingPart - + Creates a BuildingPart object including selected objects @@ -3965,12 +3985,12 @@ Floor creation aborted. Arch_CurtainWall - + Curtain Wall - + Creates a curtain wall object from selected line or from scratch @@ -3978,22 +3998,22 @@ Floor creation aborted. Arch_CutPlane - + Cut with plane - + Cut an object with a plane - + Cut with a line - + Cut an object with a line with normal workplane @@ -4001,12 +4021,12 @@ Floor creation aborted. Arch_Equipment - + Equipment - + Creates an equipment object from a selected object (Part or Mesh) @@ -4014,12 +4034,12 @@ Floor creation aborted. Arch_Fence - + Fence - + Creates a fence object from a selected section, post and path @@ -4027,12 +4047,12 @@ Floor creation aborted. Arch_Floor - + Level - + Creates a Building Part object that represents a level, including selected objects @@ -4040,12 +4060,12 @@ Floor creation aborted. Arch_Frame - + Frame - + Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. @@ -4142,7 +4162,7 @@ Floor creation aborted. Arch_MaterialTools - + Material tools @@ -4249,17 +4269,17 @@ Floor creation aborted. Arch_Pipe - + Pipe - + Creates a pipe object from a given Wire or Line - + Creates a connector between 2 or 3 selected pipes @@ -4267,7 +4287,7 @@ Floor creation aborted. Arch_PipeConnector - + Connector @@ -4275,7 +4295,7 @@ Floor creation aborted. Arch_PipeTools - + Pipe tools @@ -4296,12 +4316,12 @@ Floor creation aborted. Arch_Project - + Project - + Creates a project entity aggregating the selected sites. @@ -4309,12 +4329,12 @@ Floor creation aborted. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar @@ -4361,12 +4381,12 @@ Floor creation aborted. Arch_Roof - + Roof - + Creates a roof object from the selected wire. @@ -4387,12 +4407,12 @@ Floor creation aborted. Arch_SectionPlane - + Section Plane - + Creates a section plane object, including the selected objects @@ -4413,12 +4433,12 @@ Floor creation aborted. Arch_Site - + Site - + Creates a site object including selected objects. @@ -4436,7 +4456,7 @@ Floor creation aborted. - + Creates a stairs object @@ -4457,7 +4477,7 @@ Floor creation aborted. Arch_Stairs - + Stairs @@ -4517,12 +4537,12 @@ Floor creation aborted. Arch_Truss - + Truss - + Creates a truss object from selected line or from scratch @@ -4853,7 +4873,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index f81d33d455..9f17935284 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -846,45 +846,39 @@ Write '$dim' so that it is replaced by the dimension length. - - A unit to express the measurement. -Leave blank for system default - - - - + Arrow size - + Arrow type - + Rotate the dimension arrows 180 degrees - + The distance the dimension line is extended past the extension lines - + Length of the extension lines - + Length of the extension line beyond the dimension line - + Shows the dimension line and arrows @@ -988,6 +982,33 @@ beyond the dimension line Display a leader line or not + + + The base object that will be duplicated. + + + + + Number of copies to create. + + + + + Rotation factor of the twisted array. + + + + + Fill letters with faces + + + + + A unit to express the measurement. +Leave blank for system default. +Use 'arch' to force US arch notation + + Dialog @@ -1352,7 +1373,7 @@ from menu Tools -> Addon Manager - + Unable to insert new object into a scaled part @@ -1367,52 +1388,52 @@ from menu Tools -> Addon Manager - + Scale - + X factor - + Y factor - + Z factor - + Uniform scaling - + Working plane orientation - + Copy - + Modify subelements - + Pick from/to points - + Create a clone @@ -1476,7 +1497,7 @@ The array can be turned into a polar or a circular array by changing its type. - + Fillet @@ -1500,6 +1521,26 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + + + Save style + + + + + Name of this new style: + + + + + Name exists. Overwrite? + + + + + Error: json module not found. Unable to save style + + DraftCircularArrayTaskPanel @@ -1891,12 +1932,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -1959,12 +2000,12 @@ Create a group first to use this tool. Draft_Arc - + Arc - + Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. @@ -1973,12 +2014,12 @@ CTRL to snap, SHIFT to constrain. Draft_ArcTools - + Arc tools - + Create various types of circular arcs. @@ -2002,12 +2043,12 @@ to polar or circular, and its properties can be modified. Draft_AutoGroup - + Autogroup - + Select a group to add all Draft and Arch objects to. @@ -2055,12 +2096,12 @@ CTRL to snap, SHIFT to constrain. Draft_Circle - + Circle - + Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. @@ -2096,12 +2137,12 @@ The resulting clone can be scaled in each of its three directions. Draft_CubicBezCurve - + Cubic bezier curve - + Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. @@ -2124,12 +2165,12 @@ CTRL to snap, SHIFT to constrain. Draft_Dimension - + Dimension - + Creates a dimension. - Pick three points to create a simple linear dimension. @@ -2193,12 +2234,12 @@ Use TechDraw Workbench instead for generating technical drawings. Draft_Edit - + Edit - + Edits the active object. Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. @@ -2485,12 +2526,12 @@ Select the base object, and then select the compound or the sketch to create the Draft_PointLinkArray - + PointLinkArray - + Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. @@ -2559,6 +2600,14 @@ CTRL to snap, SHIFT to constrain, ALT to copy. Select group + + + If the selection is a group, it selects all objects that are inside this group, including those in nested sub-groups. + +If the selection is a simple object inside a group, it will select the "brother" objects, that is, +those that are at the same level as this object, including the upper group that contains them all. + + Draft_SelectPlane @@ -2577,12 +2626,12 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetStyle - + Set style - + Sets default styles @@ -2605,12 +2654,12 @@ Then you can use it to save a different camera position and objects' states Draft_Shape2DView - + Shape 2D view - + Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. @@ -2621,12 +2670,12 @@ These projections can be used to create technical drawings with the TechDraw Wor Draft_ShapeString - + Shape from text - + Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. @@ -2635,12 +2684,12 @@ The closed shapes can be used for extrusions and boolean operations. Draft_ShowSnapBar - + Show snap toolbar - + Show the snap toolbar if it is hidden. @@ -2665,12 +2714,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap - + Toggles Grid On/Off - + Toggle Draft Grid @@ -2678,12 +2727,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Angle - + Angle - + Set snapping to points in a circular arc located at multiples of 30 and 45 degree angles. @@ -2691,12 +2740,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Center - + Center - + Set snapping to the center of a circular arc. @@ -2704,12 +2753,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Dimensions - + Show dimensions - + Show temporary linear dimensions when editing an object and using other snapping methods. @@ -2717,12 +2766,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Endpoint - + Endpoint - + Set snapping to endpoints of an edge. @@ -2730,12 +2779,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Extension - + Extension - + Set snapping to the extension of an edge. @@ -2743,12 +2792,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Grid - + Grid - + Set snapping to the intersection of grid lines. @@ -2756,12 +2805,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Intersection - + Intersection - + Set snapping to the intersection of edges. @@ -2769,12 +2818,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Lock - + Main snapping toggle On/Off - + Activates or deactivates all snap methods at once. @@ -2782,12 +2831,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Midpoint - + Midpoint - + Set snapping to the midpoint of an edge. @@ -2795,12 +2844,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Near - + Nearest - + Set snapping to the nearest point of an edge. @@ -2808,12 +2857,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Ortho - + Orthogonal - + Set snapping to a direction that is a multiple of 45 degrees from a point. @@ -2821,12 +2870,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Parallel - + Parallel - + Set snapping to a direction that is parallel to an edge. @@ -2834,12 +2883,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Perpendicular - + Perpendicular - + Set snapping to a direction that is perpendicular to an edge. @@ -2847,12 +2896,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_Special - + Special - + Set snapping to the special points defined inside an object. @@ -2860,12 +2909,12 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& Draft_Snap_WorkingPlane - + Working plane - + Restricts snapping to a point in the current working plane. If you select a point outside the working plane, for example, by using other snapping methods, it will snap to that point's projection in the current working plane. @@ -2905,12 +2954,12 @@ then draw a line to specify the distance and direction of stretching. Draft_SubelementHighlight - + Subelement highlight - + Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. @@ -3031,12 +3080,12 @@ convert closed edges into filled faces and parametric polygons, and merge faces Draft_Wire - + Polyline - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -3044,12 +3093,12 @@ convert closed edges into filled faces and parametric polygons, and merge faces Draft_WireToBSpline - + Wire to B-spline - + Converts a selected polyline to a B-spline, or a B-spline to a polyline. @@ -3229,220 +3278,235 @@ value by using the [ and ] keys while drawing - + Text color - + Shape color - + Line width - + The color of faces - + The type of dimension arrows - + Dot - + Circle - + Arrow - + Tick - + Tick-2 - + The color of texts and dimension texts - + The size of texts and dimension texts - + Show unit - + Line color - + The size of dimension arrows - + The font to use for texts and dimensions - + The line style - + Solid - + Dashed - + Dotted - + DashDot - + Text size - + Unit override - + The unit to use for dimensions. Leave blank to use current FreeCAD unit - + The transparency of faces - + % - + Transparency - + Display mode - + Text font - + Arrow size - + The display mode for faces - + Flat Lines - + Wireframe - + Shaded - + Points - + Draw style - + The color of lines - + Arrow style - + px - + Apply to selected objects - + Lines and faces - + Annotations - + If the unit suffix is shown on dimension texts or not + + + Fills the values below with a stored style preset + + + + + Load preset + + + + + Save current style as a preset... + + Gui::Dialog::DlgSettingsDraft @@ -4531,32 +4595,32 @@ Note that this is not fully supported, and many object will be not editable with - + Enable draft statusbar customization - + Draft Statusbar - + Enable snap statusbar widget - + Draft snap widget - + Enable draft statusbar annotation scale widget - + Annotation scale widget @@ -4818,29 +4882,39 @@ This value is the maximum segment length. The overall transparency of the grid + + + Global + + + + + G + + ImportDWG - - Converting: + + Conversion successful - - Conversion successful + + Converting: ImportSVG - + Unknown SVG export style, switching to Translated - + The export list contains no object with a valid bounding box @@ -4848,7 +4922,7 @@ This value is the maximum segment length. Workbench - + Draft Snap @@ -4856,127 +4930,122 @@ This value is the maximum segment length. draft - + Draft Command Bar - + Toggle construction mode - + Autogroup off - + active command: - + None - + Active Draft command - + X coordinate of next point - + X - + Y - + Z - + Y coordinate of next point - + Z coordinate of next point - + Enter point - + Enter a new point with the given coordinates - + Length - + Angle - + Length of current segment - + Angle of current segment - + Radius - + Radius of Circle - + If checked, command will not finish until you press the command button again - - If checked, an OCC-style offset will be performed instead of the classic offset - - - - + &OCC-style offset - + Sides - + Number of sides @@ -4986,197 +5055,172 @@ This value is the maximum segment length. - + Auto - + Text string to draw - + String - + Height of text - + Height - + Intercharacter spacing - + Tracking - + Full path to font file: - + Open a FileChooser for font file - + Line - + DWire - + Circle - - Center X - - - - + Arc - + Point - + Label - + Distance - - Trim - - - - + Pick Object - + Edit - + Global X - + Global Y - + Global Z - + Local X - + Local Y - + Local Z - + Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. - + Please enter a text string. - + Select a Font file - + Please enter a font file. - - Autogroup: - - - - + Faces - + Remove - + Add - + Facebinder elements - - BSpline - - - - - BezCurve - - - - + Copy @@ -5193,252 +5237,217 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Relative - + Continue - + Close - + Fill - + Exit - + Snap On/Off - + Increase snap radius - + Decrease snap radius - + Restrict X - + Restrict Y - + Restrict Z - + Select edge - + Add custom snap point - + Length mode - + Wipe - + Set Working Plane - + Cycle snap object - + Check this to lock the current angle - - Coordinates relative to last point or absolute - - - - + Filled - + Finish - + Finishes the current drawing or editing operation - + &Undo (CTRL+Z) - + Undo the last segment - + Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point - + Set WP - + Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - + Subelement mode - + Modify subelements - + If checked, subelements will be modified instead of entire objects - - CubicBezCurve - - - - + Top - + Front - + Side - + Current working plane - - - Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled - - - - - Polyline - - Draft - + Toggle near snap on/off - + Create text - + Press this button to create the text object, or finish your text with two blank lines - - Center Y - - - - - Center Z - - - - + Offset distance - + Trim distance - - Wire - - - - + Change default style for new objects @@ -5617,21 +5626,11 @@ To enabled FreeCAD to download these libraries, answer Yes. Wrong input: must be a placement, a vector, or a rotation. - - - Points: - - Wrong input: must be list or tuple of three points exactly. - - - Placement: - - Wrong input: incorrect type of placement. @@ -5951,7 +5950,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + ShapeString: string has no wires @@ -6196,7 +6195,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + ShapeString @@ -6211,7 +6210,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create ShapeString @@ -6225,43 +6224,33 @@ To enabled FreeCAD to download these libraries, answer Yes. Select an object to upgrade - - - Clone - - Select an object to clone - - Ellipse - - - - + Pick first point - + Create Ellipse - + Pick opposite point - + Create Line - + Create Wire @@ -6271,32 +6260,32 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Unable to create a Wire from selected objects - + Convert to Wire - + This object does not support possible coincident points, please try again. - + Active object must have more than two points/nodes - + Selection is not a Knot - + Endpoint of BezCurve can't be smoothed @@ -6305,11 +6294,6 @@ To enabled FreeCAD to download these libraries, answer Yes. Sketch is too complex to edit: it is suggested to use sketcher default editor - - - Facebinder - - Select faces from existing objects @@ -6321,20 +6305,10 @@ To enabled FreeCAD to download these libraries, answer Yes. - - Subelement highlight - - - - + Select an object to edit - - - Dimension - - Create Dimension @@ -6350,18 +6324,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Edges don't intersect! - - - Drawing - - The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead. - + Select an object to project @@ -6391,37 +6360,37 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Move - + Select an object to move - + Pick start point - + Pick end point - + Some subelements could not be moved. - + Point array - + Please select exactly two objects, the base object and the point object, before calling this command. @@ -6446,87 +6415,82 @@ To enabled FreeCAD to download these libraries, answer Yes. - - Convert polyline/B-spline - - - - + Main toggle snap - + Midpoint snap - + Perpendicular snap - + Grid snap - + Intersection snap - + Parallel snap - + Endpoint snap - + Angle snap (30 and 45 degrees) - + Arc center snap - + Edge extension snap - + Near snap - + Orthogonal snap - + Special point snap - + Dimension display - + Working plane snap - + Show snap toolbar @@ -6541,52 +6505,42 @@ To enabled FreeCAD to download these libraries, answer Yes. - - Link array - - - - - Polygon - - - - + Pick center point - + Pick radius - + Create Polygon (Part) - + Create Polygon - + Mirror - + Select an object to mirror - + Pick start point of mirror line - + Pick end point of mirror line @@ -6596,57 +6550,42 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Scale - + Select an object to scale - + Pick base point - + Pick reference distance from base point - + Some subelements could not be scaled. - - Unable to scale object: - - - - - Unable to scale objects: - - - - + This object type cannot be scaled directly. Please use the clone method. - + Pick new distance from base point - - Project 2D view - - - - + Create 2D view @@ -6686,37 +6625,37 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Stretch - + Select an object to stretch - + Pick first point of selection rectangle - + Pick opposite point of selection rectangle - + Pick start point of displacement - + Pick end point of displacement - + Turning one Rectangle into a Wire @@ -6726,17 +6665,12 @@ To enabled FreeCAD to download these libraries, answer Yes. - - Rectangle - - - - + Create Plane - + Create Rectangle @@ -6766,42 +6700,37 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick target point - + Create Label - + Pick endpoint of leader line - + Pick text position - + Select a Draft object to edit - + No edit point found for selected object - - Too many objects selected, max number set to: - - - - + : this object is not editable @@ -6815,23 +6744,13 @@ To enabled FreeCAD to download these libraries, answer Yes. Please select exactly two objects, the base object and the path object, before calling this command. - - - Path link array - - Path twisted array - - Path twisted link array - - - - + Trimex @@ -6846,40 +6765,35 @@ To enabled FreeCAD to download these libraries, answer Yes. - + The offset distance - + The offset angle - + Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires - + These objects don't intersect. - + Too many intersection points. - - - Join - - Select an object to join @@ -6911,17 +6825,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Working plane aligned to global placement of - + Dir - + Custom @@ -6945,11 +6859,6 @@ To enabled FreeCAD to download these libraries, answer Yes. Undo line - - - Split - - Click anywhere on a line to split it. @@ -7011,15 +6920,10 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick ShapeString location point - - - Apply style - - Change Style @@ -7036,17 +6940,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Autogroup - + Add new Layer - + Add to construction group @@ -7071,72 +6975,67 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Start angle - + Pick start angle - + Aperture angle - + Pick aperture - + Create Circle (Part) - + Create Circle - + Create Arc (Part) - + Create Arc - + Pick aperture angle - + Arc by 3 points - - Text - - - - + Pick location point - + Create Text - + Rotate @@ -7146,41 +7045,129 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick rotation center - + Base angle - + The base angle you wish to start the rotation from - + Pick base angle - + Rotation - + The amount of rotation you wish to perform. The final angle will be the base angle plus this amount. - + Pick rotation angle + + + Global + + + + + Coordinates relative to last point or to coordinate system origin +if is the first point to set + + + + + Coordinates relative to global coordinate system. +Uncheck to use working plane coordinate system + + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe. +Not available if Draft preference option 'Use Part Primitives' is enabled + + + + + If checked, an OCC-style offset will be performedinstead of the classic offset + + + + + Local u0394X + + + + + Local u0394Y + + + + + Local u0394Z + + + + + Global u0394X + + + + + Global u0394Y + + + + + Global u0394Z + + + + + Autogroup: + + + + + Points: + + + + + Placement: + + + + + Unable to scale object: + + + + + Unable to scale objects: + + + + + Too many objects selected, max number set to: + + importOCA @@ -7196,7 +7183,7 @@ The final angle will be the base angle plus this amount. - successfully exported + successfully exported diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts index a45e610f77..298c216fde 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts @@ -4,18 +4,18 @@ CmdDrawingAnnotation - + Drawing - + &Annotation - - + + Inserts an Annotation view in the active drawing @@ -23,18 +23,18 @@ CmdDrawingClip - + Drawing - + &Clip - - + + Inserts a clip group in the active drawing @@ -42,18 +42,18 @@ CmdDrawingDraftView - + Drawing - + &Draft View - - + + Inserts a Draft view of the selected object(s) in the active drawing @@ -61,18 +61,18 @@ CmdDrawingExportPage - + File - + &Export page... - - + + Export a page to an SVG file @@ -80,13 +80,13 @@ CmdDrawingNewA3Landscape - + Drawing - - + + Insert new A3 landscape drawing @@ -94,13 +94,13 @@ CmdDrawingNewPage - + Drawing - - + + Insert new drawing @@ -108,17 +108,17 @@ CmdDrawingNewView - + Drawing - + Insert view in drawing - + Insert a new View of a Part in the active drawing @@ -144,18 +144,18 @@ CmdDrawingOpenBrowserView - + Drawing - + Open &browser view - - + + Opens the selected page in a browser view @@ -163,17 +163,17 @@ CmdDrawingOrthoViews - + Drawing - + Insert orthographic views - + Insert an orthographic projection of a part in the active drawing @@ -181,18 +181,18 @@ CmdDrawingProjectShape - + Drawing - + Project shape... - - + + Project shape onto a user-defined plane @@ -200,18 +200,18 @@ CmdDrawingSpreadsheetView - + Drawing - + &Spreadsheet View - - + + Inserts a view of a selected spreadsheet in the active drawing @@ -219,18 +219,18 @@ CmdDrawingSymbol - + Drawing - + &Symbol - - + + Inserts a symbol from a svg file in the active drawing @@ -238,132 +238,126 @@ DrawingGui::DrawingView - + &Background - + &Outline - + &Native - + &OpenGL - + &Image - + &High Quality Antialiasing - + Open SVG File - + Could not open file '%1'. - + &Renderer - + Export PDF - + PDF file - + Page sizes - - + A0 - - + A1 - - + A2 - - + A3 - - + A4 - - + A5 - + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - + Can't open file '%1' for writing. @@ -639,32 +633,32 @@ Do you want to continue? Drawing_NewPage - + Landscape - + Portrait - + %1%2 %3 - + Insert new %1%2 %3 drawing - + %1%2 %3 (%4) - + Insert new %1%2 %3 (%4) drawing @@ -673,74 +667,74 @@ Do you want to continue? QObject - + Choose an SVG file to open - - + + Scalable Vector Graphic - - - - - + + + + + Wrong selection - + Select a Part object. - - - - - - + + + + + + No page found - - - - - - + + + + + + Create a page first. - + Select exactly one Part object. - - + + Select one Page object. - + All Files - + Export page - + Select exactly one Spreadsheet object. diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 219ac8a38e..d0543951df 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -69,6 +69,11 @@ GeometryElementsSelection + + + Geometry reference selector for a + + Geometry reference selector for a @@ -84,6 +89,26 @@ Click on "Add" and select geometric elements to add them to the list. If no geometry is added to the list, all remaining ones are used. The following geometry elements are allowed to select: + + + Click on "Add" and select geometric elements to add them to the list. + + + + + Click on 'Add' and select geometric elements to add them to the list. + + + + + The following geometry elements are allowed to select: + + + + + If no geometry is added to the list, all remaining ones are used. + + Selection mode diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts index 258813ffc6..e5560f16da 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts @@ -739,7 +739,7 @@ - Mesh Mesh Create + Mesh Create @@ -1639,48 +1639,48 @@ to a smoother appearance. MeshGui::GmshWidget - + Automatic - + Adaptive - + Frontal - + Frontal Quad - + Parallelograms - - + + Time: - + Running gmsh... - + Failed to start - + Error diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts index d7b76e05fe..4d4ef9d680 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts @@ -482,13 +482,13 @@ A value in the range of 0.2-10. - - + + No active document - + Select a shape for meshing, first. diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index 3c8fa35107..6989457882 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -141,47 +141,47 @@ - + Unsupported Function - + Press OK - + Add - + Clear - + as Mesh - + Add OpenSCAD Element - + Perform - + Mesh Boolean - + Error all shapes must be either 2D or both must be 3D @@ -190,16 +190,36 @@ Unable to explode %s + + + Load + + + + + Save + + + + + Refresh + + + + + Refesh + + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -254,12 +274,12 @@ OpenSCAD_Hull - + Hull - + Perform Hull @@ -280,12 +300,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -293,12 +313,12 @@ OpenSCAD_Minkowski - + Minkowski - + Perform Minkowski @@ -384,7 +404,7 @@ Workbech - + OpenSCAD Part tools @@ -392,7 +412,7 @@ Workbench - + OpenSCADTools diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index b302c4ab1e..0e5288138c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -301,6 +301,20 @@ Click 'Continue' to create the feature anyway, or 'Abort' to Select at least two objects, or one or more compounds, first! If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + + + Bad selection + + + + + Computing the result failed with an error: + +{err} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). @@ -311,16 +325,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to Slice to compound - - - Boolean Fragments - - - - - Split objects where they intersect - - Slice a selected object by using other objects as cutting tools. @@ -353,17 +357,13 @@ A 'Compound Filter' can be used to extract the remaining pieces. - - Bad selection + + Boolean Fragments - - Computing the result failed with an error: - -{err} - -Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + Split objects where they intersect diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index 6331d2de40..71c9fcc841 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -1,20 +1,38 @@ - + - CmdPartDesignAdditiveLoft + CmdPartDesignAdditiveHelix - + PartDesign - + + Additive helix + + + + + Sweep a selected sketch along a helix + + + + + CmdPartDesignAdditiveLoft + + + PartDesign + + + + Additive loft - + Loft a selected profile through other profile sections @@ -22,17 +40,17 @@ CmdPartDesignAdditivePipe - + PartDesign - + Additive pipe - + Sweep a selected sketch along a path or to other profiles @@ -40,17 +58,17 @@ CmdPartDesignBody - + PartDesign - + Create body - + Create a new body and make it active @@ -58,17 +76,17 @@ CmdPartDesignBoolean - + PartDesign - + Boolean operation - + Boolean operation with two or more bodies @@ -76,17 +94,17 @@ CmdPartDesignCS - + PartDesign - + Create a local coordinate system - + Create a new local coordinate system @@ -94,17 +112,17 @@ CmdPartDesignChamfer - + PartDesign - + Chamfer - + Chamfer the selected edges of a shape @@ -112,17 +130,17 @@ CmdPartDesignClone - + PartDesign - + Create a clone - + Create a new clone @@ -130,17 +148,17 @@ CmdPartDesignDraft - + PartDesign - + Draft - + Make a draft on a face @@ -148,17 +166,17 @@ CmdPartDesignDuplicateSelection - + PartDesign - + Duplicate selected object - + Duplicates the selected object and adds it to the active body @@ -166,17 +184,17 @@ CmdPartDesignFillet - + PartDesign - + Fillet - + Make a fillet on an edge, face or body @@ -184,17 +202,17 @@ CmdPartDesignGroove - + PartDesign - + Groove - + Groove a selected sketch @@ -202,17 +220,17 @@ CmdPartDesignHole - + PartDesign - + Hole - + Create a hole with the selected sketch @@ -220,17 +238,17 @@ CmdPartDesignLine - + PartDesign - + Create a datum line - + Create a new datum line @@ -238,17 +256,17 @@ CmdPartDesignLinearPattern - + PartDesign - + LinearPattern - + Create a linear pattern feature @@ -256,17 +274,17 @@ CmdPartDesignMigrate - + PartDesign - + Migrate - + Migrate document to the modern PartDesign workflow @@ -274,17 +292,17 @@ CmdPartDesignMirrored - + PartDesign - + Mirrored - + Create a mirrored feature @@ -292,17 +310,17 @@ CmdPartDesignMoveFeature - + PartDesign - + Move object to other body - + Moves the selected object to another body @@ -310,17 +328,17 @@ CmdPartDesignMoveFeatureInTree - + PartDesign - + Move object after other object - + Moves the selected object and insert it after another object @@ -328,17 +346,17 @@ CmdPartDesignMoveTip - + PartDesign - + Set tip - + Move the tip of the body @@ -346,17 +364,17 @@ CmdPartDesignMultiTransform - + PartDesign - + Create MultiTransform - + Create a multitransform feature @@ -364,17 +382,17 @@ CmdPartDesignNewSketch - + PartDesign - + Create sketch - + Create a new sketch @@ -382,17 +400,17 @@ CmdPartDesignPad - + PartDesign - + Pad - + Pad a selected sketch @@ -400,17 +418,17 @@ CmdPartDesignPlane - + PartDesign - + Create a datum plane - + Create a new datum plane @@ -418,17 +436,17 @@ CmdPartDesignPocket - + PartDesign - + Pocket - + Create a pocket with the selected sketch @@ -436,17 +454,17 @@ CmdPartDesignPoint - + PartDesign - + Create a datum point - + Create a new datum point @@ -454,17 +472,17 @@ CmdPartDesignPolarPattern - + PartDesign - + PolarPattern - + Create a polar pattern feature @@ -472,17 +490,17 @@ CmdPartDesignRevolution - + PartDesign - + Revolution - + Revolve a selected sketch @@ -490,17 +508,17 @@ CmdPartDesignScaled - + PartDesign - + Scaled - + Create a scaled feature @@ -508,35 +526,67 @@ CmdPartDesignShapeBinder - + PartDesign - + Create a shape binder - + Create a new shape binder + + CmdPartDesignSubShapeBinder + + + PartDesign + + + + + + Create a sub-object(s) shape binder + + + + + CmdPartDesignSubtractiveHelix + + + PartDesign + + + + + Subtractive helix + + + + + Sweep a selected sketch along a helix and remove it from the body + + + CmdPartDesignSubtractiveLoft - + PartDesign - + Subtractive loft - + Loft a selected profile through other profile sections and remove it from the body @@ -544,17 +594,17 @@ CmdPartDesignSubtractivePipe - + PartDesign - + Subtractive pipe - + Sweep a selected sketch along a path or to other profiles and remove it from the body @@ -562,17 +612,17 @@ CmdPartDesignThickness - + PartDesign - + Thickness - + Make a thick solid @@ -591,42 +641,42 @@ - + Additive Box - + Additive Cylinder - + Additive Sphere - + Additive Cone - + Additive Ellipsoid - + Additive Torus - + Additive Prism - + Additive Wedge @@ -634,57 +684,156 @@ CmdPrimtiveCompSubtractive - + PartDesign - - + + Create a subtractive primitive - + Subtractive Box - + Subtractive Cylinder - + Subtractive Sphere - + Subtractive Cone - + Subtractive Ellipsoid - + Subtractive Torus - + Subtractive Prism - + Subtractive Wedge + + Command + + + Edit ShapeBinder + + + + + Create ShapeBinder + + + + + Create SubShapeBinder + + + + + Create Clone + + + + + + Make copy + + + + + Create a Sketch on Face + + + + + Create a new Sketch + + + + + Convert to MultiTransform feature + + + + + Create Boolean + + + + + Add a Body + + + + + Migrate legacy part design features to Bodies + + + + + Move tip to selected feature + + + + + Duplicate a PartDesign object + + + + + Move an object + + + + + Move an object inside tree + + + + + Mirrored + + + + + Make LinearPattern + + + + + PolarPattern + + + + + Scaled + + + FeaturePickDialog @@ -726,17 +875,17 @@ Gui::TaskView::TaskWatcherCommands - + Face tools - + Sketch tools - + Create Geometry @@ -755,7 +904,7 @@ - Modules: + Module: @@ -789,36 +938,33 @@ PartDesign::Groove - + The requested feature cannot be created. The reason may be that: - - • the active Body does not contain a base shape, so there is no + - the active Body does not contain a base shape, so there is no material to be removed; - • the selected sketch does not belong to the active Body. + - the selected sketch does not belong to the active Body. PartDesign::Hole - + The requested feature cannot be created. The reason may be that: - - • the active Body does not contain a base shape, so there is no + - the active Body does not contain a base shape, so there is no material to be removed; - • the selected sketch does not belong to the active Body. + - the selected sketch does not belong to the active Body. PartDesign::Pocket - + The requested feature cannot be created. The reason may be that: - - • the active Body does not contain a base shape, so there is no + - the active Body does not contain a base shape, so there is no material to be removed; - • the selected sketch does not belong to the active Body. + - the selected sketch does not belong to the active Body. @@ -830,205 +976,259 @@ - - + + Width: - - + + Length: - - - - - + + + + + Height: - - - + + Angle: - - - - - + + + + + Radius: - - - + + + Angle in first direction: + + + + + + Angle in first direction + + + + + + Angle in second direction: + + + + + + Angle in second direction + + + + + Rotation angle: + + + + + + Radius 1: - - - + + + Radius 2: - - + + U parameter: - + V parameters: - + + Radius in local z-direction + + + + + Radius in local x-direction + + + + Radius 3: - - + + Radius in local y-direction +If zero, it is equal to Radius2 + + + + + V parameter: - + + Radius in local xy-plane + + + + + Radius in local xz-plane + + + + U Parameter: - - + + Polygon: - - + + Circumradius: - + X min/max: - + Y min/max: - + Z min/max: - + X2 min/max: - + Z2 min/max: - + Pitch: - + Coordinate system: - + Right-handed - + Left-handed - + Growth: - + Number of rotations: - - + + Angle 1: - - + + Angle 2: - + From three points - + Major radius: - + Minor radius: - - - + + + X: - - - + + + Y: - - - + + + Z: - + End point - + Start point @@ -1042,7 +1242,7 @@ - You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references cancel the command. + You selected geometries which are not part of the active body. Please define how to handle those selections. If you do not want those references, cancel the command. @@ -1064,7 +1264,7 @@ PartDesignGui::NoDependentsSelection - + Selecting this will cause circular dependency. @@ -1102,12 +1302,12 @@ - + Boolean parameters - + Remove @@ -1115,12 +1315,44 @@ PartDesignGui::TaskBoxPrimitives - + Primitive parameters - + + Cone radii are equal + + + + + The radii for cones must not be equal! + + + + + + + Invalid wedge parameters + + + + + X min must not be equal to X max! + + + + + Y min must not be equal to Y max! + + + + + Z min must not be equal to Z max! + + + + Create primitive @@ -1133,15 +1365,87 @@ - - Size: + + + + Click button to enter selection mode, +click again to end selection - + + Add + + + + + - select an item to highlight it +- double-click on an item to see the chamfers + + + + + Type + + + + + Equal distance + + + + + Two distances + + + + + Distance and angle + + + + + Flip direction + + + + + Size + + + + + Size 2 + + + + + Angle + + + + Remove + + + + + + There must be at least one item + + + + + Selection error + + + + + At least one item must be kept. + + PartDesignGui::TaskDatumParameters @@ -1154,17 +1458,17 @@ PartDesignGui::TaskDlgBooleanParameters - + Empty body list - + The body list cannot be empty - + Boolean: Accept: Input error @@ -1185,15 +1489,7 @@ PartDesignGui::TaskDlgFeatureParameters - - Input error - - - - - PartDesignGui::TaskDlgPipeParameters - - + Input error @@ -1215,39 +1511,80 @@ + + + Click button to enter selection mode, +click again to end selection + + + + Add face - + Remove face - + + - select an item to highlight it +- double-click on an item to see the drafts + + + + Draft angle - + Neutral plane - + Pull direction - + Reverse pull direction - + + + + + There must be at least one item + + + + + Selection error + + + + + At least one item must be kept. + + + + + PartDesignGui::TaskDressUpParameters + + Remove + + + + There must be at least one item + + PartDesignGui::TaskFeaturePick @@ -1292,52 +1629,52 @@ - + Valid - + Invalid shape - + No wire in sketch - + Sketch already used by other feature - + Belongs to another body - + Belongs to another part - + Doesn't belong to any body - + Base plane - + Feature is located after the tip feature - + Select feature @@ -1351,59 +1688,243 @@ - Add ref + + + Click button to enter selection mode, +click again to end selection - - Remove ref + + Add - + + - select an item to highlight it +- double-click on an item to see the fillets + + + + Radius: - + Remove + + + + + + There must be at least one item + + + + + Selection error + + + + + At least one item must be kept. + + + + + PartDesignGui::TaskHelixParameters + + + Form + + + + + Status: + + + + + Valid + + + + + Axis: + + + + + + Base X axis + + + + + + Base Y axis + + + + + + Base Z axis + + + + + Horizontal sketch axis + + + + + Vertical sketch axis + + + + + + Select reference... + + + + + Mode: + + + + + Pitch-Height-Angle + + + + + Pitch-Turns-Angle + + + + + Height-Turns-Angle + + + + + Height-Turns-Growth + + + + + Pitch: + + + + + Height: + + + + + Turns: + + + + + Cone angle: + + + + + Growth: + + + + + Left handed + + + + + Reversed + + + + + Remove outside of profile + + + + + Update view + + + + + Helix parameters + + PartDesignGui::TaskHoleParameters - + Hole parameters - + None - - ISO metric coarse profile + + Counterbore + + + + + Countersink + + + + + Cheesehead (deprecated) + + + + + Countersink socket screw (deprecated) + + + + + Cap screw (deprecated) - ISO metric fine profile + ISO metric regular profile - UTS coarse profile + ISO metric fine profile - UTS fine profile + UTS coarse profile + UTS fine profile + + + + UTS extra fine profile @@ -1426,32 +1947,37 @@ - + + List can be reordered by dragging + + + + Direction - + Reverse direction - + Length - + Occurrences - + OK - + Update view @@ -1461,7 +1987,7 @@ - + Error @@ -1504,7 +2030,12 @@ - + + List can be reordered by dragging + + + + Update view @@ -1514,7 +2045,7 @@ - + Remove @@ -1537,17 +2068,22 @@ - + + List can be reordered by dragging + + + + Plane - + OK - + Update view @@ -1557,7 +2093,7 @@ - + Error @@ -1580,62 +2116,67 @@ - + + List can be reordered by dragging + + + + Transformations - + Update view - + Remove - + Edit - + Delete - + Add mirrored transformation - + Add linear pattern - + Add polar pattern - + Add scaled transformation - + Move up - + Move down - + Right-click to add @@ -1654,80 +2195,147 @@ - - + + Dimension - + Length - Offset + Use custom vector for pad direction otherwise +the sketch plane's normal vector will be used - - Symmetric to plane + + Use custom direction - - Reversed + + x - - 2nd length + + x-component of direction vector + + + + + y - - + y-component of direction vector + + + + + z + + + + + z-component of direction vector + + + + + If unchecked, the length will be +measured along the specified direction + + + + + Length along sketch normal + + + + + Offset to face + + + + + Offset from face in which pad will end + + + + + Applies length symmetrically to sketch plane + + + + + Symmetric to plane + + + + + Reverses pad direction + + + + + Reversed + + + + + 2nd length + + + + + + Face - + Update view - + Pad parameters - - + + No face selected - - + + To last - - + + To first - - + + Up to face - - + + Two dimensions @@ -1785,40 +2393,45 @@ - + Add Edge - + Remove Edge - + Set the constant binormal vector used to calculate the profiles orientation - + X - + Y - + Z - + Section orientation + + + Remove + + PartDesignGui::TaskPipeParameters @@ -1874,10 +2487,26 @@ - + Pipe parameters + + + Remove + + + + + + Input error + + + + + No active body + + PartDesignGui::TaskPipeScaling @@ -1912,10 +2541,15 @@ - + Section transformation + + + Remove + + PartDesignGui::TaskPocketParameters @@ -1937,39 +2571,39 @@ - + Length - + Offset - + Symmetric to plane - + Reversed - + 2nd length - + Face - + Update view @@ -2027,32 +2661,37 @@ - + + List can be reordered by dragging + + + + Axis - + Reverse direction - + Angle - + Occurrences - + OK - + Update view @@ -2062,11 +2701,19 @@ - + Error + + PartDesignGui::TaskPrimitiveParameters + + + Attachment + + + PartDesignGui::TaskRevolutionParameters @@ -2081,19 +2728,19 @@ - + Base X axis - + Base Y axis - + Base Z axis @@ -2109,7 +2756,7 @@ - + Select reference... @@ -2119,17 +2766,17 @@ - + Symmetric to plane - + Reversed - + Update view @@ -2157,22 +2804,22 @@ - + Factor - + Occurrences - + OK - + Update view @@ -2213,7 +2860,7 @@ PartDesignGui::TaskSketchBasedParameters - + Face @@ -2227,62 +2874,90 @@ + + + Click button to enter selection mode, +click again to end selection + + + + Add face - + Remove face - + + - select an item to highlight it +- double-click on an item to see the features + + + + Thickness - + Mode - + Join Type - + Skin - + Pipe - + Recto Verso - + Arc - + + Intersection - + Make thickness inwards - - Remove + + + + + There must be at least one item + + + + + Selection error + + + + + At least one item must be kept. @@ -2297,59 +2972,59 @@ PartDesignGui::TaskTransformedParameters - + Normal sketch axis - + Vertical sketch axis - + Horizontal sketch axis - - + + Construction line %1 - + Base X axis - + Base Y axis - + Base Z axis - - + + Select reference... - + Base XY plane - + Base YZ plane - + Base XZ plane @@ -2357,50 +3032,50 @@ PartDesignGui::ViewProviderBody - + Toggle active body PartDesign_CompPrimitiveAdditive - - - Create an additive box by its width, height and length - - - Create an additive cylinder by its radius, height and angle + Create an additive box by its width, height, and length - Create an additive sphere by its radius and various angles + Create an additive cylinder by its radius, height, and angle - Create an additive cone + Create an additive sphere by its radius and various angles - Create an additive ellipsoid + Create an additive cone - Create an additive torus + Create an additive ellipsoid - Create an additive prism + Create an additive torus + Create an additive prism + + + + Create an additive wedge @@ -2408,42 +3083,42 @@ PartDesign_CompPrimitiveSubtractive - + Create a subtractive box by its width, height and length - + Create a subtractive cylinder by its radius, height and angle - + Create a subtractive sphere by its radius and various angles - + Create a subtractive cone - + Create a subtractive ellipsoid - + Create a subtractive torus - + Create a subtractive prism - + Create a subtractive wedge @@ -2451,12 +3126,12 @@ PartDesign_MoveFeature - + Select body - + Select a body from the list @@ -2464,479 +3139,508 @@ PartDesign_MoveFeatureInTree - + Select feature - + Select a feature from the list + + + Move tip + + + + + The moved feature appears after the currently set tip. + + + + + Do you want the last feature to be the new tip? + + QObject - + Invalid selection - + There are no attachment modes that fit selected objects. Select something else. - - - + + + Error - + There is no active body. Please make a body active before inserting a datum entity. - + + Sub-Shape Binder + + + + Several sub-elements selected - + You have to select a single face as support for a sketch! - + No support face selected - + You have to select a face as support for a sketch! - + No planar support - + You need a planar face as support for a sketch! - + No valid planes in this document - + Please create a plane first or select a face to sketch on - - - - - - + + + + + + - - + + A dialog is already open in the task panel - - - - - - + + + + + + - - + + Do you want to close this dialog? - + + Cannot use this command as there is no solid to subtract from. + + + + + Ensure that the body contains a feature before attempting a subtractive command. + + + + + Cannot use selected object. Selected object must belong to the active body + + + + + Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. + + + + No sketch to work on - + No sketch is available in the document - - - - + + + + Wrong selection - - Select an edge, face or body. + + Select an edge, face, or body. - - Select an edge, face or body from a single body. + + Select an edge, face, or body from a single body. - - + + Select an edge, face, or body from an active body. + + + + + Please create a feature first. + + + + + Please select only one feature in an active body. + + + + + Selection is not in Active Body - - Select an edge, face or body from an active body. - - - - + Wrong object type - + %1 works only on parts. - + Shape of the selected Part is empty - + not possible on selected faces/edges. - + No valid features in this document - - Please create a subtractive or additive feature first. - - - - - Multiple Features Selected - - - - - Please select only one subtractive or additive feature first. - - - - - Please select only one subtractive or additive feature in an active body. - - - - + Part creation failed - + Failed to create a part object. - - - - - + + + + Bad base feature - + Body can't be based on a PartDesign feature. - + %1 already belongs to a body, can't use it as base feature for another body. - - Body can't be based on another body. - - - - + Base feature (%1) belongs to other part. - + The selected shape consists of multiple solids. This may lead to unexpected results. - + The selected shape consists of multiple shells. This may lead to unexpected results. - + The selected shape consists of only a shell. This may lead to unexpected results. - + The selected shape consists of multiple solids or shells. This may lead to unexpected results. - + Base feature - + Body may be based on no more than one feature. - + Nothing to migrate - - No PartDesign features found that don't belong to a body.Nothing to migrate. + + No PartDesign features found that don't belong to a body. Nothing to migrate. - + Sketch plane cannot be migrated - + Please edit '%1' and redefine it to use a Base or Datum plane as the sketch plane. - - - - - + + + + + Selection error - + Select exactly one PartDesign feature or a body. - + Couldn't determine a body for the selected feature '%s'. - + Only a solid feature can be the tip of a body. - - - + + + Features cannot be moved - + Some of the selected features have dependencies in the source body - + Only features of a single source Body can be moved - + There are no other bodies to move to - + Impossible to move the base feature of a body. - + Select one or more features from the same body. - + Beginning of the body - + + Dependency violation + + + + + Early feature must not depend on later feature. + + + + + + No previous feature found - + It is not possible to create a subtractive feature without a base feature available - - Missing neutral plane - - - - - Please select a plane or an edge plus a pull direction - - - - - + + + Vertical sketch axis - - + + + Horizontal sketch axis - + + Construction line %1 - + Face - + No active Body - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - + Active Body Required - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. - + Feature is not in a body - + In order to use this feature it needs to belong to a body object in the document. - + Feature is not in a part - + In order to use this feature it needs to belong to a part object in the document. - + Set colors... - + Edit boolean - - + + Plane - - + + Line - - + + Point - + Coordinate System - + Edit datum - - + + Edit %1 - + Feature error - + %1 misses a base feature. This feature is broken and can't be edited. @@ -2952,7 +3656,7 @@ This feature is broken and can't be edited. - + Edit loft @@ -2962,7 +3666,7 @@ This feature is broken and can't be edited. - + Edit pipe @@ -2982,57 +3686,260 @@ This feature is broken and can't be edited. - + Edit shape binder - + + Synchronize + + + + + Select bound object + + + + One transformed shape does not intersect support - + %1 transformed shapes do not intersect support - + Transformation succeeded - + The document "%1" you are editing was designed with an old version of PartDesign workbench. - + Do you want to migrate in order to use modern PartDesign features? - + The document "%1" seems to be either in the middle of the migration process from legacy PartDesign or have a slightly broken structure. - + Do you want to make the migration automatically? - + Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design->Migrate...'. +Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - + Migrate manually + + + Edit helix + + + + + SprocketParameter + + + Sprocket parameter + + + + + Number of teeth: + + + + + Sprocket Reference + + + + + ANSI 25 + + + + + ANSI 35 + + + + + ANSI 41 + + + + + ANSI 40 + + + + + ANSI 50 + + + + + ANSI 60 + + + + + ANSI 80 + + + + + ANSI 100 + + + + + ANSI 120 + + + + + ANSI 140 + + + + + ANSI 160 + + + + + ANSI 180 + + + + + ANSI 200 + + + + + ANSI 240 + + + + + Bicycle with Derailleur + + + + + Bicycle without Derailleur + + + + + ISO 606 06B + + + + + ISO 606 08B + + + + + ISO 606 10B + + + + + ISO 606 12B + + + + + ISO 606 16B + + + + + ISO 606 20B + + + + + ISO 606 24B + + + + + Motorcycle 420 + + + + + Motorcycle 425 + + + + + Motorcycle 428 + + + + + Motorcycle 520 + + + + + Motorcycle 525 + + + + + Motorcycle 530 + + + + + Motorcycle 630 + + + + + Chain Pitch: + + + + + 0 in + + + + + Roller Diameter: + + + + + Thickness: + + TaskHole @@ -3166,153 +4073,265 @@ Although you will be able to migrate any moment later with 'Part Design-> TaskHoleParameters - + Task Hole Parameters - - - Type + + Whether the hole gets a thread - - - Diameter + + Whether the hole gets a modelled thread - - - Depth - - - - - Cutoff inner - - - - - Class - - - - - Tapered + + Model Thread + Live update of changes to the thread +Note that the calculation can take some time + + + + + Update view + + + + + Customize thread clearance + + + + + Custom Thread Clearance + + + + + + Clearance + + + + + Custom Thread clearance value + + + + + Hole clearance +Only available for holes without thread + + + + + + Standard + + + + + + + Close + + + + + + Wide + + + + + Tolerance class for threaded holes according to hole profile + + + + + Hole diameter + + + + + Thread Depth + + + + + Hole depth + + + + + Tapped (DIN76) + + + + + + Type + + + + + Taper angle for the hole +90 degree: straight hole +under 90: smaller hole radius at the bottom +over 90: larger hole radius at the bottom + + + + + Reverses the hole direction + + + + + Reversed + + + + + + Diameter + + + + + + Depth + + + + + Class + + + + + Cut type for screw heads + + + + + Check to override the values predefined by the 'Type' + + + + + Custom values + + + + + The size of the drill point will be taken into +account for the depth of blind holes + + + + + Take into account for depth + + + + + Tapered + + + + Direction - - Fit - - - - + Flat - + Angled - - Pitch - - - - + Right hand - + Left hand - - Model actual thread - - - - + Threaded - - Angle - - - - + Profile - + Countersink angle - + + Dimension - + Through all - + Size - - Standard fit - - - - - Close fit - - - - - Cutoff outer - - - - + <b>Drill point</b> - + <b>Misc</b> - + <b>Hole cut</b> - + <b>Threading and size</b> + + + Normal + + + + + Loose + + TaskTransformedMessages @@ -3322,7 +4341,7 @@ Although you will be able to migrate any moment later with 'Part Design-> - + No message @@ -3330,8 +4349,38 @@ Although you will be able to migrate any moment later with 'Part Design-> Workbench - - Part Design + + &Part Design + + + + + &Sketch + + + + + Create a datum + + + + + Create an additive feature + + + + + Create a subtractive feature + + + + + Apply a pattern + + + + + Apply a dress-up feature diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 8f62d5fba2..fdcc3e9cad 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -8,6 +8,26 @@ Show the temporary path construction objects when module is in DEBUG mode. + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + + + + + Stop index(angle) for rotational scan + + + + + Dropcutter lines are created parallel to this axis. + + The direction along which dropcutter lines are created @@ -18,6 +38,11 @@ Should the operation be limited by the stock object or by the bounding box of the base object + + + Additional offset to the selected bounding box + + Step over percentage of the drop cutter path @@ -38,16 +63,6 @@ Enable optimization which removes unnecessary points from G-Code output - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - The completion mode for the operation: single or multi-pass @@ -59,8 +74,13 @@ - - Stop index(angle) for rotational scan + + The model will be rotated around this axis. + + + + + Start index(angle) for rotational scan @@ -78,26 +98,6 @@ Cut through waste to depth at model edge, releasing the model. - - - Dropcutter lines are created parallel to this axis. - - - - - Additional offset to the selected bounding box - - - - - The model will be rotated around this axis. - - - - - Start index(angle) for rotational scan - - Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -1031,21 +1031,6 @@ Pick Start Point - - - Consider toggling the InverseAngle property and recomputing the operation. - - - - - Verify final depth of pocket shaped by vertical faces. - - - - - Depth Warning - - Processing model as a whole ... @@ -1080,6 +1065,21 @@ Processing subs individually ... + + + Consider toggling the InverseAngle property and recomputing the operation. + + + + + Verify final depth of pocket shaped by vertical faces. + + + + + Depth Warning + + Selected faces form loop. Processing looped faces. @@ -1312,12 +1312,6 @@ Increased to stock top. PathDeburr - - - The selected tool has no FlatRadius and no TipDiameter property. Assuming {} - - - The selected tool has no CuttingEdgeAngle property. Assuming Endmill @@ -1334,6 +1328,12 @@ Increased to stock top. The additional depth of the tool path + + + The selected tool has no FlatRadius and no TipDiameter property. Assuming {} + + + How to join chamfer segments @@ -1469,6 +1469,11 @@ Increased to stock top. %s not support for flipping + + + %s not supported for flipping + + PathGui @@ -1967,6 +1972,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Start Depth is lower than face depth. Setting to + + + Start Depth is lower than face depth. Setting to: + + Face appears to NOT be horizontal AFTER rotation applied. @@ -2030,6 +2040,21 @@ If it is necessary to set the FinalDepth manually please select a different oper Please set to an acceptable value greater than zero. + + + The tool number in use + + + + + Face Profile + + + + + Check edge selection and Final Depth requirements for profiling open edge(s). + + For open edges, verify Final Depth for this operation. @@ -2060,16 +2085,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on edges - - - The tool number in use - - - - - Face Profile - - The current tool in use @@ -2211,6 +2226,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Property Bag + + + PropertyBag + + Creates an object which can be used to store reference properties. @@ -2763,6 +2783,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Devfines which standard thread was chosen + + + Set thread's tpi - used for imperial threads + + + + + Defines which standard thread was chosen + + Set thread's major diameter @@ -2779,8 +2809,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Set thread's tpi - used for imperial threads + + Set thread's TPI (turns per inch) - used for imperial threads @@ -4049,11 +4079,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - - Check the path job for common errors @@ -4134,6 +4159,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height + + + The Job has no selected Base object. + + Maximum Z Height diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts index 69f12b4396..e694ba2408 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts @@ -4,17 +4,17 @@ CmdRaytracingExportProject - + File - + &Export project... - + Export a Raytracing project to a file @@ -22,27 +22,27 @@ CmdRaytracingNewLuxProject - + Raytracing - + New Luxrender project - + Insert new Luxrender project into the document - + No template - + No template available @@ -50,17 +50,17 @@ CmdRaytracingNewPartSegment - + Raytracing - + Insert part - + Insert a new part object into a Raytracing project @@ -68,27 +68,27 @@ CmdRaytracingNewPovrayProject - + Raytracing - + New POV-Ray project - + Insert new POV-Ray project into the document - + No template - + No template available @@ -96,17 +96,17 @@ CmdRaytracingRender - + Raytracing - + &Render - + Renders the current raytracing project with an external renderer @@ -114,17 +114,17 @@ CmdRaytracingResetCamera - + Raytracing - + &Reset Camera - + Sets the camera of the selected Raytracing project to match the current view @@ -170,15 +170,15 @@ - - + + No perspective camera - + The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? @@ -199,19 +199,19 @@ Do you want to continue? - - + + No template - - + + Cannot create a project because there is no template installed. - + The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? @@ -223,7 +223,7 @@ Do you want to continue? - + POV-Ray @@ -231,8 +231,8 @@ Do you want to continue? - - + + All Files @@ -240,107 +240,107 @@ Do you want to continue? - + Export page - - - - + + + + Wrong selection - + Select a Part object. - - + + No Raytracing project to insert - + Create a Raytracing project to insert a view. - + Select a Raytracing project to insert the view. - - - + + + Select one Raytracing project object. - + Luxrender - - + + POV-Ray not found - + Please set the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. - - + + Luxrender not found - + Please set the path to the luxrender or luxconsole executable in the preferences. - + Please correct the path to the luxrender or luxconsole executable in the preferences. - + POV-Ray file missing - + The POV-Ray project file doesn't exist. - - - + + + Rendered image - + Lux project file missing - + The Lux project file doesn't exist. diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot.ts b/src/Mod/Robot/Gui/Resources/translations/Robot.ts index 1b4a662bcc..19112db305 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot.ts @@ -51,7 +51,7 @@ - Create a new empty trajectory + Create a new empty trajectory diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 1499aa6155..745ac2100a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -94,17 +94,17 @@ CmdSketcherCarbonCopy - + Sketcher - + Carbon copy - + Copies the geometry of another sketch @@ -112,17 +112,17 @@ CmdSketcherClone - + Sketcher - + Clone - + Creates a clone of the geometry taking as reference the last selected point @@ -186,27 +186,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher - + Constrain arc or circle - + Constrain an arc or a circle - + Constrain radius - + Constrain diameter @@ -214,17 +214,17 @@ CmdSketcherCompCopy - + Sketcher - + Copy - + Creates a clone of the geometry taking as reference the last selected point @@ -232,27 +232,27 @@ CmdSketcherCompCreateArc - + Sketcher - + Create arc - + Create an arc in the sketcher - + Center and end points - + End points and rim point @@ -260,17 +260,17 @@ CmdSketcherCompCreateBSpline - + Sketcher - + Create a B-spline - + Create a B-spline in the sketch @@ -278,27 +278,27 @@ CmdSketcherCompCreateCircle - + Sketcher - + Create circle - + Create a circle in the sketcher - + Center and rim point - + 3 rim points @@ -306,42 +306,42 @@ CmdSketcherCompCreateConic - + Sketcher - + Create a conic - + Create a conic in the sketch - + Ellipse by center, major radius, point - + Ellipse by periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints @@ -349,27 +349,27 @@ CmdSketcherCompCreateFillets - + Sketcher - + Fillets - + Create a fillet between two lines - + Sketch fillet - + Constraint-preserving sketch fillet @@ -377,52 +377,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher - + Create regular polygon - + Create a regular polygon in the sketcher - + Triangle - + Square - + Pentagon - + Hexagon - + Heptagon - + Octagon - + Regular Polygon @@ -476,17 +476,17 @@ CmdSketcherConstrainAngle - + Sketcher - + Constrain angle - + Fix the angle of a line or the angle between two lines @@ -494,17 +494,17 @@ CmdSketcherConstrainBlock - + Sketcher - + Constrain block - + Block constraint: block the selected edge from moving @@ -512,17 +512,17 @@ CmdSketcherConstrainCoincident - + Sketcher - + Constrain coincident - + Create a coincident constraint on the selected item @@ -530,17 +530,17 @@ CmdSketcherConstrainDiameter - + Sketcher - + Constrain diameter - + Fix the diameter of a circle or an arc @@ -548,17 +548,17 @@ CmdSketcherConstrainDistance - + Sketcher - + Constrain distance - + Fix a length of a line or the distance between a line and a vertex @@ -566,17 +566,17 @@ CmdSketcherConstrainDistanceX - + Sketcher - + Constrain horizontal distance - + Fix the horizontal distance between two points or line ends @@ -584,17 +584,17 @@ CmdSketcherConstrainDistanceY - + Sketcher - + Constrain vertical distance - + Fix the vertical distance between two points or line ends @@ -602,17 +602,17 @@ CmdSketcherConstrainEqual - + Sketcher - + Constrain equal - + Create an equality constraint between two lines or between circles and arcs @@ -620,17 +620,17 @@ CmdSketcherConstrainHorizontal - + Sketcher - + Constrain horizontally - + Create a horizontal constraint on the selected item @@ -638,17 +638,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher - + Constrain internal alignment - + Constrains an element to be aligned with the internal geometry of another element @@ -656,17 +656,17 @@ CmdSketcherConstrainLock - + Sketcher - + Constrain lock - + Lock constraint: create both a horizontal and a vertical distance constraint on the selected vertex @@ -675,17 +675,17 @@ on the selected vertex CmdSketcherConstrainParallel - + Sketcher - + Constrain parallel - + Create a parallel constraint between two lines @@ -693,17 +693,17 @@ on the selected vertex CmdSketcherConstrainPerpendicular - + Sketcher - + Constrain perpendicular - + Create a perpendicular constraint between two lines @@ -711,17 +711,17 @@ on the selected vertex CmdSketcherConstrainPointOnObject - + Sketcher - + Constrain point onto object - + Fix a point onto an object @@ -729,17 +729,17 @@ on the selected vertex CmdSketcherConstrainRadius - + Sketcher - + Constrain radius or weight - + Fix the radius of a circle or an arc or fix the weight of a pole of a B-Spline @@ -747,17 +747,17 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Sketcher - + Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -766,17 +766,17 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Sketcher - + Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point @@ -785,17 +785,17 @@ with respect to a line or a third point CmdSketcherConstrainTangent - + Sketcher - + Constrain tangent - + Create a tangent constraint between two entities @@ -803,17 +803,17 @@ with respect to a line or a third point CmdSketcherConstrainVertical - + Sketcher - + Constrain vertically - + Create a vertical constraint on the selected item @@ -839,17 +839,17 @@ with respect to a line or a third point CmdSketcherCopy - + Sketcher - + Copy - + Creates a simple copy of the geometry taking as reference the last selected point @@ -857,17 +857,17 @@ with respect to a line or a third point CmdSketcherCreate3PointArc - + Sketcher - + Create arc by three points - + Create an arc by its end points and a point along the arc @@ -875,17 +875,17 @@ with respect to a line or a third point CmdSketcherCreate3PointCircle - + Sketcher - + Create circle by three points - + Create a circle by 3 perimeter points @@ -893,17 +893,17 @@ with respect to a line or a third point CmdSketcherCreateArc - + Sketcher - + Create arc by center - + Create an arc by its center and by its end points @@ -911,17 +911,17 @@ with respect to a line or a third point CmdSketcherCreateArcOfEllipse - + Sketcher - + Create an arc of ellipse - + Create an arc of ellipse in the sketch @@ -929,17 +929,17 @@ with respect to a line or a third point CmdSketcherCreateArcOfHyperbola - + Sketcher - + Create an arc of hyperbola - + Create an arc of hyperbola in the sketch @@ -947,17 +947,17 @@ with respect to a line or a third point CmdSketcherCreateArcOfParabola - + Sketcher - + Create an arc of parabola - + Create an arc of parabola in the sketch @@ -965,17 +965,17 @@ with respect to a line or a third point CmdSketcherCreateBSpline - + Sketcher - + Create B-spline - + Create a B-spline via control points in the sketch. @@ -983,17 +983,17 @@ with respect to a line or a third point CmdSketcherCreateCircle - + Sketcher - + Create circle - + Create a circle in the sketch @@ -1001,17 +1001,17 @@ with respect to a line or a third point CmdSketcherCreateDraftLine - + Sketcher - + Create draft line - + Create a draft line in the sketch @@ -1019,17 +1019,17 @@ with respect to a line or a third point CmdSketcherCreateEllipseBy3Points - + Sketcher - + Create ellipse by 3 points - + Create an ellipse by 3 points in the sketch @@ -1037,17 +1037,17 @@ with respect to a line or a third point CmdSketcherCreateEllipseByCenter - + Sketcher - + Create ellipse by center - + Create an ellipse by center in the sketch @@ -1055,17 +1055,17 @@ with respect to a line or a third point CmdSketcherCreateFillet - + Sketcher - + Create fillet - + Create a fillet between two lines or at a coincident point @@ -1073,17 +1073,17 @@ with respect to a line or a third point CmdSketcherCreateHeptagon - + Sketcher - + Create heptagon - + Create a heptagon in the sketch @@ -1091,17 +1091,17 @@ with respect to a line or a third point CmdSketcherCreateHexagon - + Sketcher - + Create hexagon - + Create a hexagon in the sketch @@ -1109,17 +1109,17 @@ with respect to a line or a third point CmdSketcherCreateLine - + Sketcher - + Create line - + Create a line in the sketch @@ -1127,17 +1127,17 @@ with respect to a line or a third point CmdSketcherCreateOctagon - + Sketcher - + Create octagon - + Create an octagon in the sketch @@ -1145,17 +1145,17 @@ with respect to a line or a third point CmdSketcherCreatePentagon - + Sketcher - + Create pentagon - + Create a pentagon in the sketch @@ -1163,17 +1163,17 @@ with respect to a line or a third point CmdSketcherCreatePeriodicBSpline - + Sketcher - + Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. @@ -1181,17 +1181,17 @@ with respect to a line or a third point CmdSketcherCreatePoint - + Sketcher - + Create point - + Create a point in the sketch @@ -1199,17 +1199,17 @@ with respect to a line or a third point CmdSketcherCreatePointFillet - + Sketcher - + Create corner-preserving fillet - + Fillet that preserves intersection point and most constraints @@ -1217,17 +1217,17 @@ with respect to a line or a third point CmdSketcherCreatePolyline - + Sketcher - + Create polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1235,17 +1235,17 @@ with respect to a line or a third point CmdSketcherCreateRectangle - + Sketcher - + Create rectangle - + Create a rectangle in the sketch @@ -1253,17 +1253,17 @@ with respect to a line or a third point CmdSketcherCreateRegularPolygon - + Sketcher - + Create regular polygon - + Create a regular polygon in the sketch @@ -1271,17 +1271,17 @@ with respect to a line or a third point CmdSketcherCreateSlot - + Sketcher - + Create slot - + Create a slot in the sketch @@ -1289,17 +1289,17 @@ with respect to a line or a third point CmdSketcherCreateSquare - + Sketcher - + Create square - + Create a square in the sketch @@ -1307,17 +1307,17 @@ with respect to a line or a third point CmdSketcherCreateText - + Sketcher - + Create text - + Create text in the sketch @@ -1325,17 +1325,17 @@ with respect to a line or a third point CmdSketcherCreateTriangle - + Sketcher - + Create equilateral triangle - + Create an equilateral triangle in the sketch @@ -1379,17 +1379,17 @@ with respect to a line or a third point CmdSketcherDeleteAllConstraints - + Sketcher - + Delete all constraints - + Delete all constraints in the sketch @@ -1397,17 +1397,17 @@ with respect to a line or a third point CmdSketcherDeleteAllGeometry - + Sketcher - + Delete all geometry - + Delete all geometry and constraints in the current sketch, with the exception of external geometry @@ -1433,17 +1433,17 @@ with respect to a line or a third point CmdSketcherExtend - + Sketcher - + Extend edge - + Extend an edge with respect to the picked position @@ -1451,17 +1451,17 @@ with respect to a line or a third point CmdSketcherExternal - + Sketcher - + External geometry - + Create an edge linked to an external geometry @@ -1606,17 +1606,17 @@ as mirroring reference. CmdSketcherMove - + Sketcher - + Move - + Moves the geometry taking as reference the last selected point @@ -1642,17 +1642,17 @@ as mirroring reference. CmdSketcherRectangularArray - + Sketcher - + Rectangular array - + Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1679,17 +1679,17 @@ This will clear the 'Support' property, if any. CmdSketcherRestoreInternalAlignmentGeometry - + Sketcher - + Show/hide internal geometry - + Show all internal geometry or hide unused internal geometry @@ -1729,17 +1729,17 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsAssociatedWithConstraints - + Sketcher - + Select associated geometry - + Select the geometrical elements associated with the selected constraints @@ -1747,17 +1747,17 @@ This will clear the 'Support' property, if any. CmdSketcherSelectElementsWithDoFs - + Sketcher - + Select unconstrained DoF - + Select geometrical elements where the solver still detects unconstrained degrees of freedom. @@ -1858,6 +1858,24 @@ This will clear the 'Support' property, if any. + + CmdSketcherSplit + + + Sketcher + + + + + Split edge + + + + + Splits an edge into two while preserving constraints + + + CmdSketcherStopOperation @@ -1897,17 +1915,17 @@ This will clear the 'Support' property, if any. CmdSketcherSymmetry - + Sketcher - + Symmetry - + Creates symmetric geometry with respect to the last selected line or point @@ -1915,17 +1933,17 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Sketcher - + Activate/deactivate constraint - + Activates or deactivates the selected constraints @@ -1951,17 +1969,17 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Sketcher - + Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode @@ -1970,17 +1988,17 @@ into driving or reference mode CmdSketcherTrimming - + Sketcher - + Trim edge - + Trim an edge with respect to the picked position @@ -2053,241 +2071,246 @@ invalid constraints, degenerated geometry, etc. Command - - + + Add horizontal constraint - - - + + + Add horizontal alignment - - + + Add vertical constraint - + Add vertical alignment - + Add 'Lock' constraint - + Add relative 'Lock' constraint - + Add fixed constraint - + Add 'Block' constraint - + Add block constraint - - - + + + Add coincident constraint - + Swap edge tangency with ptp tangency - - + + Add distance from horizontal axis constraint - - + + Add distance from vertical axis constraint - - + + Add point to point distance constraint - - + + Add point to line Distance constraint - - + + Add length constraint - - + + Add point on object constraint - - + + Add point to point horizontal distance constraint - + Add fixed x-coordinate constraint - - + + Add point to point vertical distance constraint - + Add fixed y-coordinate constraint - - + + Add parallel constraint - - - - - - - + + + + + + + Add perpendicular constraint - + Add perpendicularity constraint - - - - - - - + + Swap PointOnObject+tangency with point to curve tangency + + + + + + + + + + Add tangent constraint - + Swap coincident+tangency with ptp tangency - - - - - - - - - - - - - - + + + + + + + + + + + + + + Add tangent constraint point - - - - + + + + Add radius constraint - - - - + + + + Add diameter constraint - - - - - - + + + + + + Add angle constraint - - + + Add equality constraint - - - - - + + + + + Add symmetric constraint - + Add Snell's law constraint - - + + Add internal alignment constraint - + Toggle constraint to driving/reference - + Activate/Deactivate constraint @@ -2332,100 +2355,105 @@ invalid constraints, degenerated geometry, etc. - + Add sketch line - + Add sketch box - + Add line to sketch wire - + Add arc to sketch wire - - + + Add sketch arc - - + + Add sketch circle - + Add sketch ellipse - + Add sketch arc of ellipse - + Add sketch arc of hyperbola - + Add sketch arc of Parabola - + Add Pole circle - + Add sketch point - - + + Create fillet - + Trim edge - + Extend edge - + + Split edge + + + + Add external geometry - + Add carbon copy - + Add slot - + Add hexagon @@ -2455,32 +2483,32 @@ invalid constraints, degenerated geometry, etc. - + Exposing Internal Geometry - + Create symmetric geometry - + Copy/clone/move geometry - + Create copy of geometry - + Delete all geometry - + Delete All Constraints @@ -2491,42 +2519,42 @@ invalid constraints, degenerated geometry, etc. - + Update constraint's virtual space - + Add auto constraints - + Swap constraint names - + Rename sketch constraint - + Drag Point - + Drag Curve - + Drag Constraint - + Modify sketch constraints @@ -2569,47 +2597,47 @@ invalid constraints, degenerated geometry, etc. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2676,132 +2704,132 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - + + + + + + + - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + @@ -2815,17 +2843,17 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - + + + + + + + + + + + @@ -2839,330 +2867,324 @@ invalid constraints, degenerated geometry, etc. - - - - - + + + + + Dimensional constraint - - - + + + Only sketch and its support is allowed to select - + One of the selected has to be on the sketch - - + + Select an edge from the sketch. - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + Impossible constraint - - - - + + + + The selected edge is not a line segment - - - - - - + + + + + + Double constraint - - - - + + + + The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! - + There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! - + There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status - + Cannot add a constraint between two external geometries. - + Cannot add a constraint between two fixed geometries. Fixed geometries involve external geometry, blocked geometry or special points as B-spline knot points. - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and conflicting constraints. - + Select one edge from the sketch. - + Select only edges from the sketch. - - - - - - - + + + + + + + Error - + Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. - - - Constraint Substitution - - - - + Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. - - + + Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an axis! - + This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. - + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Select an edge that is not a B-spline weight - + None of the selected points were constrained onto the respective curves, because they are parts of the same element, because they are both external geometry, or because the edge is not eligible. - - - - + + + + Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. - - + + Select at least two lines from the sketch. - + Select a valid line - - + + The selected edge is not a valid line - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -3170,45 +3192,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. perpendicular constraint - + Wrong number of selected objects! perpendicular constraint - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint - - + + Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -3216,255 +3238,275 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. tangent constraint - + Wrong number of selected objects! tangent constraint - - - + + + Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + Sketcher Constraint Substitution + + + + + Keep notifying me of constraint substitutions + + + + + Endpoint to edge tangency was applied instead. + + + + + Endpoint to edge tangency was applied. The point on object constraint was deleted. + + + + + + + Select one or more arcs or circles from the sketch. - + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. - - + + Constrain equal - + Do you want to share the same radius for all selected elements? - - + + Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines - - + + An angle constraint cannot be set for two parallel lines. - + Cannot add an angle constraint on an axis! - + Select two edges from the sketch. - - + + Select two or more compatible edges - + Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. - - - + + + Select two or more edges of similar type - - - - + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - + + Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Cannot create constraint with external geometry only. - + Incompatible geometry is selected. - + SnellsLaw on B-spline edge is currently unsupported. - + You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. - - + + Currently all internal geometrical elements of the ellipse are already exposed. - - - - - + + + + + Select constraints from the sketch. - + Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). - - + + Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint - - + + Maximum 2 points are supported. - - + + Maximum 2 lines are supported. - - + + Nothing to constrain - - - - + + + + Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -3476,7 +3518,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + CAD Kernel Error @@ -3542,59 +3584,59 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - - - - - - - + + + + + + + Select elements from a single sketch. - + No constraint selected - + At least one constraint must be selected - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. - + The last element must be a point or a line serving as reference for the symmetry construction. - - + + A copy requires at least one selected non-external geometric element - + Delete All Geometry - + Are you really sure you want to delete all geometry and constraints? - + Delete All Constraints - + Are you really sure you want to delete all the constraints? @@ -3612,42 +3654,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. - + This object is in another document. - + This object belongs to another body. Hold Ctrl to allow cross-references. - + This object belongs to another body and it contains external geometry. Cross-reference not allowed. - + This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -3655,62 +3697,62 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ConstraintView - + Change value - + Toggle to/from reference - + Deactivate - + Activate - + Show constraints - + Hide constraints - + Rename - + Center sketch - + Delete - + Swap constraint names - + Unnamed constraint - + Only the names of named constraints can be swapped. @@ -3733,8 +3775,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - - + + Radius: @@ -3745,8 +3787,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - - + + Diameter: @@ -3779,37 +3821,37 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - - + + Change weight - - + + Weight: - - + + Change radius - - + + Change diameter - + Refractive index ratio - + Ratio n2/n1: @@ -3825,22 +3867,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. - + This object is in another document. - + This object belongs to another body, can't link. - + This object belongs to another part, can't link. @@ -4013,23 +4055,23 @@ reflected on copies SketcherGui::SketcherGeneralWidget - - - + + + Normal Geometry - - - + + + Construction Geometry - - - + + + External Geometry @@ -4136,221 +4178,218 @@ Requires to re-enter edit mode to take effect. - - Sketcher colors - - - - - Default edge color - - - - - Default vertex color - - - - - Making line color - - - - - Edit edge color - - - - - Edit vertex color - - - - + Construction geometry - + External geometry - - Fully constrained geometry - - - - - Constraint color - - - - - Expression dependent constraint color - - - - + Color of edges - + Color of vertices - + + Working colors + + + + + Coordinate text + + + + Color used while new sketch elements are created - + + Creating line + + + + + Cursor crosshair + + + + + Geometric element colors + + + + + Internal alignment edge + + + + + Unconstrained + + + + Color of edges being edited - + + + Edge + + + + Color of vertices being edited - - Color of construction geometry in edit mode - - - - - Internal alignment edge color - - - - - Color of edges of internal alignment geometry - - - - - Color of external geometry in edit mode - - - - - Invalid Sketch - - - - - Color of geometry indicating an invalid sketch - - - - - Color of fully constrained geometry in edit mode - - - - - Fully constrained edit edge color + + + Vertex + Color of construction geometry in edit mode + + + + + Dimensional constraint + + + + + Reference constraint + + + + + Deactivated constraint + + + + + Colors outside Sketcher + + + + + Color of edges of internal alignment geometry + + + + + Color of external geometry in edit mode + + + + + Constrained + + + + + Invalid Sketch + + + + + Fully constrained Sketch + + + + + Color of geometry indicating an invalid sketch + + + + + Color of fully constrained geometry in edit mode + + + + Color of fully constrained edge color in edit mode - - Fully constrained edit construction edge color - - - - + Color of fully constrained construction edge color in edit mode - - Fully constrained edit internal alignment edge color - - - - + Color of fully constrained internal alignment edge color in edit mode - - Fully constrained edit vertex color - - - - + Color of fully constrained vertex color in edit mode - + + Constraint colors + + + + + Constraint symbols + + + + Color of driving constraints in edit mode - - Reference constraint color - - - - + Color of reference constraints in edit mode - + + Expression dependent constraint + + + + Color of expression dependent constraints in edit mode - - Deactivated constraint color - - - - + Color of deactivated constraints in edit mode - - Dimensional constraint color - - - - + Color of dimensional driving constraints - - Coordinate text color - - - - + Text color of the coordinates - + Color of crosshair cursor. (The one you get when creating a new sketch element.) - - - Cursor crosshair color - - SketcherGui::SketcherSettingsDisplay @@ -4360,163 +4399,183 @@ Requires to re-enter edit mode to take effect. - + Sketch editing - + A dialog will pop up to input a value for new dimensional constraints - + Ask for value after creating a dimensional constraint - + Segments per geometry - + Current constraint creation tool will remain active after creation - + Constraint creation "Continue Mode" - + Line pattern used for grid lines - + Base length units will not be displayed in constraints. Supports all unit systems except 'US customary' and 'Building US/Euro'. - + Hide base length units for supported unit systems - + + Use Diameter as default constraint for arcs and circles instead of Radius. + + + + + Use diameter as default constraint for arcs and circles + + + + Font size - + Visibility automation - + When opening sketch, hide all features that depend on it - + Hide all objects that depend on the sketch - + When opening sketch, show sources for external geometry links - + Show objects used for external geometry - + When opening sketch, show objects the sketch is attached to - + Show objects that the sketch is attached to + + + By default, open a sketch in Section View mode -- objects are only visible behind sketch plane + + - Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. - - - - - View scale ratio - - - - - The 3D view is scaled based on this factor - - - - - When closing sketch, move camera back to where it was before sketch was opened - - - - - Restore camera position after editing - - - - - Applies current visibility automation settings to all sketches in open documents + Open sketch in Section View mode + Note: these settings are defaults applied to new sketches. The behavior is remembered for each sketch individually as properties on the View tab. + + + + + View scale ratio + + + + + The 3D view is scaled based on this factor + + + + + When closing sketch, move camera back to where it was before sketch was opened + + + + + Restore camera position after editing + + + + + Applies current visibility automation settings to all sketches in open documents + + + + Apply to existing sketches - + Font size used for labels and constraints - + px - + Current sketcher creation tool will remain active after creation - + Geometry creation "Continue Mode" - + Grid line pattern - + Number of polygons for geometry approximation - + Unexpected C++ exception - + Sketcher @@ -4708,13 +4767,13 @@ However, no constraints linking to the endpoints were found. - + Constraints - - + + Error @@ -4965,7 +5024,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< - + Edit controls @@ -5072,136 +5131,136 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< SketcherGui::ViewProviderSketch - + Edit sketch - + A dialog is already open in the task panel - + Do you want to close this dialog? - + Invalid sketch - + Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. - + Please remove the following constraint: - + Please remove at least one of the following constraints: - + Please remove the following redundant constraint: - + Please remove the following redundant constraints: - + The following constraint is partially redundant: - + The following constraints are partially redundant: - + Please remove the following malformed constraint: - + Please remove the following malformed constraints: - + Empty sketch - - Over-constrained sketch + + Over-constrained sketch - - - - - + + Sketch contains malformed constraints + + + + + Sketch contains conflicting constraints + + + + + Sketch contains redundant constraints + + + + + Sketch contains partially redundant constraints + + + + + + + + (click to select) - - Sketch contains malformed constraints - - - - - Sketch contains conflicting constraints - - - - - Sketch contains redundant constraints - - - - - Sketch contains partially redundant constraints - - - - + Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">1 degree</span></a> of freedom. %1 - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff; background-color: #F8F8FF;">%1 degrees</span></a> of freedom. %2 - + Solved in %1 sec - + Unsolved (%1 sec) @@ -5272,8 +5331,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Clone - - + + Creates a clone of the geometry taking as reference the last selected point @@ -5281,17 +5340,17 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CompCopy - + Clone - + Copy - + Move @@ -5299,8 +5358,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc @@ -5308,8 +5367,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc @@ -5317,8 +5376,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Copy - - + + Creates a simple copy of the geometry taking as reference the last selected point @@ -5326,8 +5385,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointArc - + Create an arc by its end points and a point along the arc @@ -5335,8 +5394,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create3PointCircle - + Create a circle by 3 rim points @@ -5344,8 +5403,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArc - + Create an arc by its center and by its end points @@ -5353,8 +5412,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfEllipse - + Create an arc of ellipse by its center, major radius, and endpoints @@ -5362,8 +5421,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfHyperbola - + Create an arc of hyperbola by its center, major radius, and endpoints @@ -5371,8 +5430,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateArcOfParabola - + Create an arc of parabola by its focus, vertex, and endpoints @@ -5380,13 +5439,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateBSpline - + B-spline by control points - + Create a B-spline by control points @@ -5394,8 +5453,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateCircle - + Create a circle by its center and by a rim point @@ -5403,8 +5462,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseBy3Points - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -5412,8 +5471,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateEllipseByCenter - + Create an ellipse by center, major radius and point @@ -5421,8 +5480,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateFillet - + Creates a radius between two lines @@ -5430,8 +5489,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner @@ -5439,8 +5498,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner @@ -5448,14 +5507,14 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner @@ -5463,8 +5522,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner @@ -5472,8 +5531,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreatePointFillet - + Fillet that preserves constraints and intersection point @@ -5481,8 +5540,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateSquare - - + + Create a square by its center and by one corner @@ -5490,8 +5549,8 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner @@ -5499,13 +5558,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points - + Create a periodic B-spline by control points @@ -5578,8 +5637,8 @@ Select the method to attach this sketch to selected objects. Sketcher_Move - - + + Moves the geometry taking as reference the last selected point diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts index 69c0937462..23b6591dd0 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts @@ -560,26 +560,58 @@ Spreadsheet.my_alias_name instead of Spreadsheet.B1 SpreadsheetGui::SheetTableView - - Insert rows - - - - Remove rows - - - - Insert columns - - - - Remove columns - - Properties... + + Insert %n row(s) above + + + + + + Insert %n row(s) below + + + + + + Insert %n non-contiguous rows + + + + + + Remove row(s) + + + + + + Insert %n column(s) left + + + + + + Insert %n column(s) right + + + + + + Insert %n non-contiguous columns + + + + + + Remove column(s) + + + + Workbench diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage.ts b/src/Mod/Start/Gui/Resources/translations/StartPage.ts index 0952718cc0..24d984a1ba 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage.ts @@ -4,212 +4,212 @@ StartPage - + Start - + Documents - + Help - + Activity - + Recent files - + Tip - + Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - + Examples - + General documentation - + User hub - + This section contains documentation useful for FreeCAD users in general: a list of all the workbenches, detailed instructions on how to install and use the FreeCAD application, tutorials, and all you need to get started. - + Power users hub - + This section gathers documentation for advanced users and people interested in writing python scripts. You will also find there a repository of macros, instructions on how to install and use them, and more information about customizing FreeCAD to your specific needs. - + Developers hub - + This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. - + Manual - + The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. - + Workbenches documentation - + These are the help pages of all the workbenches currently installed on this computer. - + Getting help from the community - + The <a href="http://forum.freecadweb.org">FreeCAD forum</a> is a great place to get help from other FreeCAD users and developers. The forum has many sections for different types of issues and discussion subjects. If in doubt, post in the more general <a href="https://forum.freecadweb.org/viewforum.php?f=3">Help on using FreeCAD</a> section. - + If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! - + FreeCAD also maintains a public <a href="https://www.freecadweb.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. - + Available addons - + Below is a list of available extra workbenches that can be added to your FreeCAD installation. Browse and install them from menu Tools -> Addons manager. You can learn more about any of them by clicking the links below. - + If not bundled with your FreeCAD version, install the FreeCAD documentation package to get documentation hubs, workbench help and individual command documentation without an internet connection. - + Cannot fetch information from GitHub. <a href="EnableDownload.py">Authorize FreeCAD to access the internet</a> and reload the Start page. - + Recent commits - + Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecadweb.org/wiki/Downloads">available options</a> if you wish to obtain a development version. - + See all commits on github - + You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - + version - + build - + Create new... - + Unknown - + Forum - + The latest posts on the <a href="https://forum.freecadweb.org">FreeCAD forum</a>: - + To open any of the links above in your desktop browser, Right-click -> Open in external browser - + Creation date - + Last modification - + Notes - + Open start page preferences @@ -217,8 +217,7 @@ Workbench - - + Start page @@ -226,17 +225,17 @@ CmdStartPage - + Start - + Start Page - + Displays the start page in a browser view @@ -289,173 +288,204 @@ - + + An optional custom folder to be displayed at the bottom of the first page. +By using ";;" to separate paths, you can add several folders here + + + + Show notepad - - Shows a notepad next to the file thumbnails, where you can keep notes across FreeCAD sessions + + Shows a notepad next to the file thumbnails, where you can keep notes across sessions - + + Show tips + + + + Fonts and colors - + The background of the main start page area - + Background color - + in FreeCAD - + In external browser - - Background color gradient down - - - - - The color of the version text - - - - - Link color + + Background color down gradient + The color of the version text + + + + + Link color + + + + An optional image to display as background - + + If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below + + + + Page background color - + The color of the text on the main pages - + Background image - + Page text color - + The color of the links - + The background color of the boxes inside the pages - + Box background color - + The background color behind the panels - + The down gradient for the background color (currently unsupported) - + Open links - + Background text color - + Use FreeCAD style sheet - + Font family - + The font family to use on the start page. Can be a font name or a comma-separated series of fallback fonts - + Arial,Helvetica,sans - + The base font size to use for all texts of the Start page - + px - + Use gradient for New File icon - + + If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon + + + + Options - - Should the start page be closed after loading? + + Choose which workbench to switch to after the program launches - + + If checked, will automatically close the Start page when FreeCAD launches + + + + Switch workbench after loading - + Close start page after loading - - If FreeCAD is started by opening a file, apply the two settings above + + Close and switch on opening file + + + + + If application is started by opening a file, apply the two settings above diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index abd1ba8b0f..c5e572c1e5 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -127,17 +127,17 @@ CmdTechDrawArchView - + TechDraw - + Insert Arch Workbench Object - + Insert a View of a Section Plane from Arch Workbench @@ -316,17 +316,17 @@ CmdTechDrawDraftView - + TechDraw - + Insert Draft Workbench Object - + Insert a View of a Draft Workbench object @@ -334,22 +334,22 @@ CmdTechDrawExportPageDXF - + File - + Export Page as DXF - - Save Dxf File + + Save Dxf File - + Dxf (*.dxf) @@ -357,12 +357,12 @@ CmdTechDrawExportPageSVG - + File - + Export Page as SVG @@ -684,17 +684,17 @@ CmdTechDrawSpreadsheetView - + TechDraw - + Insert Spreadsheet View - + Insert View to a spreadsheet @@ -827,23 +827,23 @@ - + Create DraftView - + Create ArchView - + Create spreadsheet view - - + + Save page to dxf @@ -880,23 +880,23 @@ - + Drag Balloon - + Drag Dimension - + Create Balloon - + Create ActiveView @@ -931,17 +931,17 @@ - + Edit Leader - + Create Anno - + Edit Anno @@ -1165,11 +1165,6 @@ Monospace - - - - - Remove character formatting @@ -1224,11 +1219,11 @@ - - - - - + + + + + @@ -1300,47 +1295,47 @@ - + Select at least one object. - + There were no DraftWB objects in the selection. - + Please select only 1 Arch Section. - + No Arch Sections in selection. - + Can not export selection - + Page contains DrawViewArch which will not be exported. Continue? - + Select exactly one Spreadsheet object. - + No Drawing View - + Open Drawing View before attempting export to SVG. @@ -1742,35 +1737,35 @@ - + PDF (*.pdf) - - + + All Files (*.*) - + Export Page As PDF - + SVG (*.svg) - + Export page as SVG - + Are you sure you want to continue? @@ -1800,13 +1795,13 @@ - + Rich text creator - - + + Rich text editor @@ -1886,6 +1881,14 @@ Edit Detail View + + + + + + Edit %1 + + Std_Delete @@ -1904,7 +1907,7 @@ it has a weld symbol that would become broken. - + @@ -1954,7 +1957,7 @@ the following referencing objects might be lost: - + The following referencing object might break: @@ -3377,74 +3380,74 @@ Fast, but result is a collection of short straight lines. TechDrawGui::MDIViewPage - + &Export SVG - + Toggle &Keep Updated - + Toggle &Frames - + Export DXF - + Export PDF - + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - + Different paper size - + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - + Can not open file %1 for writing. - - Save Dxf File + + Save Dxf File - + Dxf (*.dxf) - + Selected: @@ -4363,28 +4366,28 @@ You can pick further points to get line segments. - - + + Pick a starting point for leader line - + Click and drag markers to adjust leader line - + Left click to set a point - + Press OK or Cancel to continue - + In progress edit abandoned. Start over. diff --git a/src/Mod/Test/Gui/Resources/translations/Test.ts b/src/Mod/Test/Gui/Resources/translations/Test.ts index 03aeb4cc76..05d7b8a506 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test.ts @@ -4,97 +4,97 @@ TestGui::UnitTest - + FreeCAD UnitTest - + Failures and errors - + Description - + &Start - + Alt+S - + &Help - + F1 - + &About - + Alt+A - + &Close - + Alt+C - + Idle - + Progress - + Remaining: - + Errors: - + Failures: - + Run: - + Test - + Select test name: @@ -102,12 +102,12 @@ TestGui::UnitTestDialog - + Help - + Enter the name of a callable object which, when called, will return a TestCase. Click 'start', and the test thus produced will be run. @@ -115,12 +115,12 @@ Double click on an error in the tree view to see more information about it, incl - + About FreeCAD UnitTest - + Copyright (c) Werner Mayer FreeCAD UnitTest is part of FreeCAD and supports writing Unit Tests for ones own modules. diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts index 1b04bffad3..a1ad8e87a4 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web.ts @@ -129,12 +129,12 @@ QObject - + Browser - + File does not exist! @@ -142,24 +142,24 @@ WebGui::BrowserView - - - + + + Error - + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - + Loading %1... @@ -167,17 +167,17 @@ WebGui::WebView - + Open in External Browser - + Open in new window - + View source