diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts
index 9de37b3e4d..fb20942cf9 100644
--- a/src/Gui/Language/FreeCAD.ts
+++ b/src/Gui/Language/FreeCAD.ts
@@ -182,8 +182,8 @@
-
+
Transform
@@ -8538,9 +8538,9 @@ Do you want to specify another directory?
+
-
Error
@@ -8575,8 +8575,8 @@ Do you want to specify another directory?
-
+
Unsaved document
@@ -8836,81 +8836,81 @@ Do you want to continue?
-
+
Do you want to skip confirmation of further critical message notifications while loading the file?
-
+
Critical Message
-
+
Too many message notifications. Notification temporarily stopped. Look at the report view for more information.
-
+
Warning
-
+
Information
-
+
Critical
-
+
Identical physical path detected. It may cause unwanted overwrite of existing document!
-
+
Are you sure you want to continue?
-
+
Please check report view for more...
-
+
Physical path:
-
-
+
+
Document:
-
-
+
+
Path:
-
+
Identical physical path
-
+
Could not save document
-
+
There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details:
"%1"
@@ -8919,102 +8919,102 @@ Would you like to save the file with a different name?
-
-
-
+
+
+
Saving aborted
-
+
Save dependent files
-
+
The file contains external dependencies. Do you want to save the dependent files, too?
-
-
+
+
Saving document failed
-
+
Save document under new filename...
-
-
+
+
Save %1 Document
-
+
Document
-
-
+
+
Failed to save document
-
+
Documents contains cyclic dependencies. Do you still want to save them?
-
+
Save a copy of the document under new filename...
-
+
%1 document (*.FCStd)
-
+
Document not closable
-
+
The document is not closable for the moment.
-
+
Document not saved
-
+
The document%1 could not be saved. Do you want to cancel closing it?
-
+
Undo
-
+
Redo
-
+
There are grouped transactions in the following documents with other preceding transactions
-
+
Choose 'Yes' to roll back all preceding transactions.
Choose 'No' to roll back in the active document only.
Choose 'Abort' to abort
@@ -10306,8 +10306,8 @@ the current copy will be lost.
-
+
Unnamed
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts
index 8d77e052df..fedd0af464 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts
@@ -79,6 +79,7 @@
DependencyResolutionDialog
+
Resolve Dependencies
@@ -1119,6 +1120,9 @@ installed addons will be checked for available updates
select_toolbar_dialog
+
+
+
Select Toolbar
@@ -1137,6 +1141,7 @@ installed addons will be checked for available updates
toolbar_button
+
Add button?
@@ -1161,4 +1166,1323 @@ installed addons will be checked for available updates
+
+ AddonsInstaller
+
+
+ Addon Manager
+
+
+
+
+ Starting up...
+
+
+
+
+ Loading addon information
+
+
+
+
+ Worker process {} is taking a long time to stop...
+
+
+
+
+
+ Previous cache process was interrupted, restarting...
+
+
+
+
+
+ Custom repo list changed, forcing recache...
+
+
+
+
+
+ Addon manager
+
+
+
+
+ You must restart FreeCAD for changes to take effect.
+
+
+
+
+ Restart now
+
+
+
+
+ Restart later
+
+
+
+
+
+ Refresh local cache
+
+
+
+
+ Updating cache...
+
+
+
+
+ Could not find addon '{}' to select
+
+
+
+
+
+
+ Checking for updates...
+
+
+
+
+ Apply {} update(s)
+
+
+
+
+ No updates available
+
+
+
+
+
+
+ Cannot launch a new installer until the previous one has finished.
+
+
+
+
+ Execution of macro failed. See console for failure details.
+
+
+
+
+
+
+
+ Maintainer
+
+
+
+
+
+
+
+ Author
+
+
+
+
+ New Python Version Detected
+
+
+
+
+ This appears to be the first time this version of Python has been used with the Addon Manager. Would you like to install the same auto-installed dependencies for it?
+
+
+
+
+ Processing, please wait...
+
+
+
+
+
+ Update
+
+
+
+
+ Updating...
+
+
+
+
+ Could not import QtNetwork -- it does not appear to be installed on your system. Your provider may have a package for this dependency (often called e.g. "python3-pyside2.qtnetwork", for example)
+
+
+
+
+ Failed to convert the specified proxy port '{}' to a port number
+
+
+
+
+ Parameter error: mutually exclusive proxy options set. Resetting to default.
+
+
+
+
+ Parameter error: user proxy indicated, but no proxy provided. Resetting to default.
+
+
+
+
+ Addon Manager: Unexpected {} response from server
+
+
+
+
+ Error with encrypted connection
+
+
+
+
+
+
+ Confirm remove
+
+
+
+
+ Are you sure you want to uninstall {}?
+
+
+
+
+
+
+ Removing Addon
+
+
+
+
+ Removing {}
+
+
+
+
+
+ Uninstall complete
+
+
+
+
+
+ Uninstall failed
+
+
+
+
+ Addon Manager Warning: Could not import QtWebEngineWidgets. Your system's package manager may provide a package for this dependency, search the package manager for possible resolutions. Display of package README will be limited until this dependency is resolved.
+
+
+
+
+ Version {version} installed on {date}
+
+
+
+
+ Version {version} installed
+
+
+
+
+ Installed on {date}
+
+
+
+
+
+
+
+ Installed
+
+
+
+
+ On branch {}, update available to version
+
+
+
+
+ Update available to version
+
+
+
+
+ An update is available
+
+
+
+
+ Git tag '{}' checked out, no updates possible
+
+
+
+
+ This is the latest version available for branch {}
+
+
+
+
+ Updated, please restart FreeCAD to use
+
+
+
+
+ Update check in progress
+
+
+
+
+ Automatic update checks disabled
+
+
+
+
+ Installation location
+
+
+
+
+ WARNING: This addon is obsolete
+
+
+
+
+ WARNING: This addon is Python 2 Only
+
+
+
+
+ WARNING: This addon requires FreeCAD
+
+
+
+
+ WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable.
+
+
+
+
+
+ No URL or wiki page provided by this macro
+
+
+
+
+ Could not load README data from URL {}
+
+
+
+
+ This Addon will be enabled next time you restart FreeCAD.
+
+
+
+
+ This Addon will be disabled next time you restart FreeCAD.
+
+
+
+
+
+
+ Success
+
+
+
+
+ Branch change succeeded, please restart to use the new version.
+
+
+
+
+ Changed to git ref '{}' -- please restart to use Addon.
+
+
+
+
+ Page JavaScript reported
+
+
+
+
+ Install
+
+
+
+
+ Uninstall
+
+
+
+
+ Check for Update
+
+
+
+
+ Run Macro
+
+
+
+
+ Change Branch
+
+
+
+
+ Enable
+
+
+
+
+ Disable
+
+
+
+
+ Return to package list
+
+
+
+
+ QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions.
+
+
+
+
+ The page is taking a long time to load... showing the data we have so far...
+
+
+
+
+ Checking connection
+
+
+
+
+ Checking for connection to GitHub...
+
+
+
+
+ Connection failed
+
+
+
+
+ Missing dependency
+
+
+
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+
+
+
+
+ Other...
+ For providing a license other than one listed
+
+
+
+
+ Select the corresponding license file in your Addon
+
+
+
+
+ Location for new license file
+
+
+
+
+ Received {} response code from server
+
+
+
+
+ Failed to install macro {}
+
+
+
+
+ Unrecognized content kind '{}'
+
+
+
+
+ Unable to locate icon at {}
+
+
+
+
+ Select an icon file for this content item
+
+
+
+
+
+
+ {} is not a subdirectory of {}
+
+
+
+
+ Select the subdirectory for this content item
+
+
+
+
+ Automatic
+
+
+
+
+ Workbench
+
+
+
+
+ Addon
+
+
+
+
+ Python
+
+
+
+
+ Yes
+
+
+
+
+ Internal Workbench
+
+
+
+
+ External Addon
+
+
+
+
+ Python Package
+
+
+
+
+
+ Other...
+
+
+
+
+ This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually:
+
+
+
+
+ Too many to list
+
+
+
+
+
+
+
+
+
+ Missing Requirement
+
+
+
+
+ The following Python packages are allowed to be automatically installed
+
+
+
+
+ Addon '{}' requires '{}', which is not available in your copy of FreeCAD.
+
+
+
+
+ Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD:
+
+
+
+
+ Press OK to install anyway.
+
+
+
+
+
+ Incompatible Python version
+
+
+
+
+ This Addon (or one if its dependencies) requires Python {}.{}, and your system is running {}.{}. Installation cancelled.
+
+
+
+
+ Optional dependency on {} ignored because it is not in the allow-list
+
+
+
+
+
+
+ Installing dependencies
+
+
+
+
+
+ Cannot execute Python
+
+
+
+
+ Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python.
+
+
+
+
+ Dependencies could not be installed. Continue with installation of {} anyway?
+
+
+
+
+
+ Cannot execute pip
+
+
+
+
+ Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was:
+
+
+
+
+
+ Continue with installation of {} anyway?
+
+
+
+
+
+ Package installation failed
+
+
+
+
+ See Report View for detailed failure log.
+
+
+
+
+ Installing Addon
+
+
+
+
+ Installing FreeCAD Addon '{}'
+
+
+
+
+ Cancelling
+
+
+
+
+ Cancelling installation of '{}'
+
+
+
+
+ {} was installed successfully
+
+
+
+
+
+ Installation Failed
+
+
+
+
+ Failed to install {}
+
+
+
+
+
+ Create new toolbar
+
+
+
+
+
+ A macro installed with the FreeCAD Addon Manager
+
+
+
+
+
+ Run
+ Indicates a macro that can be 'run'
+
+
+
+
+ Unable to read data from GitHub: check your internet connection and proxy settings and try again.
+
+
+
+
+ XML failure while reading metadata from file {}
+
+
+
+
+ Invalid metadata in file {}
+
+
+
+
+ WARNING: Path specified in package.xml metadata does not match currently checked-out branch.
+
+
+
+
+ Name
+
+
+
+
+ Class
+
+
+
+
+ Description
+
+
+
+
+ Subdirectory
+
+
+
+
+ Files
+
+
+
+
+ Select the folder containing your Addon
+
+
+
+
+ No Vermin, cancelling operation.
+
+ 'Vermin' is a Python package - do not translate
+
+
+
+
+ Scanning Addon for Python version compatibility
+
+
+
+
+ Minimum Python Version Detected
+
+
+
+
+ Vermin auto-detected a required version of Python 3.{}
+
+
+
+
+ Install Vermin?
+
+
+
+
+ Autodetecting the required version of Python for this Addon requires Vermin (https://pypi.org/project/vermin/). OK to install?
+
+
+
+
+ Attempting to install Vermin from PyPi
+
+
+
+
+
+ Installation failed
+
+
+
+
+ Failed to install Vermin -- check Report View for details.
+ 'Vermin' is the name of a Python package, do not translate
+
+
+
+
+ Failed to import vermin after installation -- cannot scan Addon.
+ 'vermin' is the name of a Python package, do not translate
+
+
+
+
+ Select an icon file for this package
+
+
+
+
+ Filter is valid
+
+
+
+
+ Filter regular expression is invalid
+
+
+
+
+ Click for details about package {}
+
+
+
+
+ Click for details about workbench {}
+
+
+
+
+ Click for details about macro {}
+
+
+
+
+ Maintainers:
+
+
+
+
+ Tags
+
+
+
+
+ updated
+
+
+
+
+
+ Up-to-date
+
+
+
+
+
+
+ Update available
+
+
+
+
+
+ Pending restart
+
+
+
+
+
+ DISABLED
+
+
+
+
+ Installed version
+
+
+
+
+ Unknown version
+
+
+
+
+ Installed on
+
+
+
+
+ Available version
+
+
+
+
+ Show Addons containing:
+
+
+
+
+ All
+
+
+
+
+ Workbenches
+
+
+
+
+ Macros
+
+
+
+
+ Preference Packs
+
+
+
+
+ Status:
+
+
+
+
+ Any
+
+
+
+
+ Not installed
+
+
+
+
+ Filter
+
+
+
+
+ OK
+
+
+
+
+ DANGER: Developer feature
+
+
+
+
+ DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue?
+
+
+
+
+ There are local changes
+
+
+
+
+ WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)?
+
+
+
+
+
+
+ Branch
+ git terminology
+
+
+
+
+ Tag
+ git terminology
+
+
+
+
+ Kind
+ Table header for git ref type (e.g. either Tag or Branch)
+
+
+
+
+ Local name
+ Table header for git ref name
+
+
+
+
+ Tracking
+ Table header for git remote tracking branch name name
+
+
+
+
+ Local updated
+ Table header for git update time of local branch
+
+
+
+
+ Remote updated
+ Table header for git update time of remote branch
+
+
+
+
+ Installation of Python package {} failed
+
+
+
+
+ Installation of optional package failed
+
+
+
+
+ Installing required dependency {}
+
+
+
+
+ Installation of Addon {} failed
+
+
+
+
+ Downloaded package.xml for {}
+
+
+
+
+ Failed to decode {} file for Addon '{}'
+
+
+
+
+ Any dependency information in this file will be ignored
+
+
+
+
+ Downloaded metadata.txt for {}
+
+
+
+
+ Downloaded requirements.txt for {}
+
+
+
+
+ Downloaded icon for {}
+
+
+
+
+
+ Syntax error while reading {} from macro {}
+
+
+
+
+ Unable to open macro wiki page at {}
+
+
+
+
+ Unable to fetch the code of this macro.
+
+
+
+
+ Unable to retrieve a description from the wiki for macro {}
+
+
+
+
+ Unable to open macro code URL {}
+
+
+
+
+ Unable to fetch macro-specified file {} from {}
+
+
+
+
+ Could not locate macro-specified file {} (should have been at {})
+
+
+
+
+ {}: Unrecognized internal workbench '{}'
+
+
+
+
+ Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({})
+
+
+
+
+ Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({})
+
+
+
+
+ An unknown error occurred
+
+
+
+
+ Could not find addon {} to remove it.
+
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
+
+
+
+ Removed extra installed file {}
+
+
+
+
+ Error while trying to remove extra installed file {}
+
+
+
+
+ Error while trying to remove macro file {}:
+
+
+
+
+ Failed to connect to GitHub. Check your connection and proxy settings.
+
+
+
+
+ WARNING: Duplicate addon {} ignored
+
+
+
+
+ Workbenches list was updated.
+
+
+
+
+ Git is disabled, skipping git macros
+
+
+
+
+ Attempting to change non-git Macro setup to use git
+
+
+
+
+
+ An error occurred updating macros from GitHub, trying clean checkout...
+
+
+
+
+ Attempting to do a clean checkout...
+
+
+
+
+ Clean checkout succeeded
+
+
+
+
+ Failed to update macros from GitHub -- try clearing the Addon Manager's cache.
+
+
+
+
+ Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time
+
+
+
+
+ Unable to fetch git updates for workbench {}
+
+
+
+
+ git status failed for {}
+
+
+
+
+ Failed to read metadata from {name}
+
+
+
+
+ Failed to fetch code for macro '{name}'
+
+
+
+
+ Caching macro code...
+
+
+
+
+ Addon Manager: a worker process failed to complete while fetching {name}
+
+
+
+
+ Out of {num_macros} macros, {num_failed} timed out while processing
+
+
+
+
+ Addon Manager: a worker process failed to halt ({name})
+
+
+
+
+ Getting metadata from macro {}
+
+
+
+
+ Timeout while fetching metadata for macro {}
+
+
+
+
+ Failed to kill process for macro {}!
+
+
+
+
+
+ Retrieving macro description...
+
+
+
+
+ Retrieving info from git
+
+
+
+
+ Retrieving info from wiki
+
+
+
+
+ Repository URL
+ Preferences header for custom repositories
+
+
+
+
+ Branch name
+ Preferences header for custom repositories
+
+
+
+
+ Basic git update failed with the following message:
+
+
+
+
+ Backing up the original directory and re-cloning
+
+
+
+
+ Failed to clone {} into {} using git
+
+
+
+
+ Installing
+
+
+
+
+ Succeeded
+
+
+
+
+ Failed
+
+
+
+
+ Std_AddonMgr
+
+
+ &Addon manager
+
+
+
+
+ Manage external workbenches, macros, and preference packs
+
+
+
+
+ AddonInstaller
+
+
+ Finished removing {}
+
+
+
+
+ Failed to remove some files
+
+
+
+
+ Addons installer
+
+
+ Finished updating the following addons
+
+
+
diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts
index 7e5b44e1ab..64a77b7980 100644
--- a/src/Mod/Arch/Resources/translations/Arch.ts
+++ b/src/Mod/Arch/Resources/translations/Arch.ts
@@ -1329,8 +1329,8 @@ are placed in a 'Group' instead.
-
+
Export options
@@ -1674,4 +1674,4920 @@ unit to work with when opening the file.
+
+ Arch
+
+
+ Structure
+
+
+
+
+
+ Beam
+
+
+
+
+
+ Column
+
+
+
+
+ Create Structures From Selection
+
+
+
+
+ Please select the base object first and then the edges to use as extrusion paths
+
+
+
+
+ Create Structural System
+
+
+
+
+ Please select at least an axis object
+
+
+
+
+
+ Create Structure
+
+
+
+
+ First point of the beam
+
+
+
+
+ Base point of column
+
+
+
+
+
+ Next point
+
+
+
+
+ Structure options
+
+
+
+
+ Drawing mode
+
+
+
+
+
+
+ Category
+
+
+
+
+
+
+ Preset
+
+
+
+
+
+
+
+ Length
+
+
+
+
+
+
+ Width
+
+
+
+
+
+
+ Height
+
+
+
+
+ Switch L/H
+
+
+
+
+ Switch L/W
+
+
+
+
+
+ Con&tinue
+
+
+
+
+ Error: The base shape couldn't be extruded along this tool object
+
+
+
+
+
+ This mesh is an invalid solid
+
+
+
+
+
+ Facemaker returned an error
+
+
+
+
+ Node Tools
+
+
+
+
+ Reset nodes
+
+
+
+
+ Edit nodes
+
+
+
+
+ Extend nodes
+
+
+
+
+ Extends the nodes of this element to reach the nodes of another element
+
+
+
+
+ Connect nodes
+
+
+
+
+ Connects nodes of this element with the nodes of another element
+
+
+
+
+ Toggle all nodes
+
+
+
+
+ Toggles all structural nodes of the document on/off
+
+
+
+
+ Extrusion Tools
+
+
+
+
+
+ Select tool...
+
+
+
+
+ Select object or edges to be used as a Tool (extrusion path)
+
+
+
+
+
+ Choose another Structure object:
+
+
+
+
+
+ The chosen object is not a Structure
+
+
+
+
+
+ The chosen object has no structural nodes
+
+
+
+
+
+ One of these objects has more than 2 nodes
+
+
+
+
+
+ Unable to find a suitable intersection point
+
+
+
+
+ Intersection found.
+
+
+
+
+
+ Intersection found.
+
+
+
+
+ Done
+
+
+
+
+
+ Couldn't compute a shape
+
+
+
+
+ You must select a base shape object and optionally a mesh object
+
+
+
+
+ Create Equipment
+
+
+
+
+ You must select exactly one base object
+
+
+
+
+ The selected object must be a mesh
+
+
+
+
+ This mesh has more than 1000 facets.
+
+
+
+
+ This operation can take a long time. Proceed?
+
+
+
+
+ The mesh has more than 500 facets. This will take a couple of minutes...
+
+
+
+
+ Create 3 views
+
+
+
+
+ BuildingPart
+
+
+
+
+ Create BuildingPart
+
+
+
+
+
+
+ Arch
+
+
+
+
+ Create profile
+
+
+
+
+ Profile settings
+
+
+
+
+ Create Profile
+
+
+
+
+ Profile
+
+
+
+
+ Please either select only Building objects or nothing at all!
+
+Site is not allowed to accept any other object besides Building.
+
+Other objects will be removed from the selection.
+
+Note: You can change that in the preferences.
+
+
+
+
+ There is no valid object in the selection.
+
+Site creation aborted.
+
+
+
+
+ Create Site
+
+
+
+
+
+ Create Roof
+
+
+
+
+
+ Unable to create a roof
+
+
+
+
+
+
+ Please select a base object
+
+
+
+
+ Roof
+
+
+
+
+ Parameters of the roof profiles :
+* Angle : slope in degrees relative to the horizontal.
+* Run : horizontal distance between the wall and the ridge.
+* Thickness : thickness of the roof.
+* Overhang : horizontal distance between the eave and the wall.
+* Height : height of the ridge above the base (calculated automatically).
+* IdRel : Id of the relative profile used for automatic calculations.
+---
+If Angle = 0 and Run = 0 then the profile is identical to the relative profile.
+If Angle = 0 then the angle is calculated so that the height is the same as the relative profile.
+If Run = 0 then the run is calculated so that the height is the same as the relative profile.
+
+
+
+
+ Id
+
+
+
+
+ Angle (deg)
+
+
+
+
+ Run (mm)
+
+
+
+
+ IdRel
+
+
+
+
+ Thickness (mm)
+
+
+
+
+ Overhang (mm)
+
+
+
+
+ Height (mm)
+
+
+
+
+ Door
+
+
+
+
+ Cutting
+
+
+
+
+ Cut Plane
+
+
+
+
+ Cut Plane options
+
+
+
+
+ Which side to cut
+
+
+
+
+ Behind
+
+
+
+
+ Front
+
+
+
+
+ Create external reference
+
+
+
+
+
+
+
+ Error: Couldn't determine character encoding
+
+
+
+
+ Frame
+
+
+
+
+ Create Frame
+
+
+
+
+ Crossing point not found in profile.
+
+
+
+
+ Shapes elevation
+
+
+
+
+ Choose which field provides shapes elevations:
+
+
+
+
+ No shape found in this file
+
+
+
+
+ Shapefile module not found
+
+
+
+
+ The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder.
+
+
+
+
+ Error: Unable to download from:
+
+
+
+
+ Could not download shapefile module. Aborting.
+
+
+
+
+ Shapefile module not downloaded. Aborting.
+
+
+
+
+ Shapefile module not found. Aborting.
+
+
+
+
+ The shapefile library can be downloaded from the following URL and installed in your macros folder:
+
+
+
+
+ Window
+
+
+
+
+
+
+ Create Window
+
+
+
+
+ Choose a face on an existing object or select a preset
+
+
+
+
+ Window not based on sketch. Window not aligned or resized.
+
+
+
+
+ No Width and/or Height constraint in window sketch. Window not resized.
+
+
+
+
+ No window found. Cannot continue.
+
+
+
+
+ Window options
+
+
+
+
+ Auto include in host object
+
+
+
+
+ Sill height
+
+
+
+
+ This window has no defined opening
+
+
+
+
+
+
+ Get selected edge
+
+
+
+
+ Unable to create component
+
+
+
+
+ Window elements
+
+
+
+
+ Hole wire
+
+
+
+
+ The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire
+
+
+
+
+ Pick selected
+
+
+
+
+
+
+
+
+
+ Remove
+
+
+
+
+
+
+
+
+ Add
+
+
+
+
+ Edit
+
+
+
+
+ Create/update component
+
+
+
+
+ Base 2D object
+
+
+
+
+
+ Wires
+
+
+
+
+
+ Components
+
+
+
+
+ Create new component
+
+
+
+
+
+
+ Name
+
+
+
+
+
+
+ Type
+
+
+
+
+
+
+ Thickness
+
+
+
+
+
+ Offset
+
+
+
+
+ Hinge
+
+
+
+
+ Opening mode
+
+
+
+
+
+ + default
+
+
+
+
+ If this is checked, the default Frame value of this window will be added to the value entered here
+
+
+
+
+ If this is checked, the default Offset value of this window will be added to the value entered here
+
+
+
+
+ Press to retrieve the selected edge
+
+
+
+
+ Invert opening direction
+
+
+
+
+ Invert hinge position
+
+
+
+
+ Only axes must be selected
+
+
+
+
+ Create Axis System
+
+
+
+
+ Please select at least one axis
+
+
+
+
+
+
+ Axes
+
+
+
+
+ Axis system components
+
+
+
+
+
+
+
+ Successfully written
+
+
+
+
+ Truss
+
+
+
+
+
+ Please select only one base object or none
+
+
+
+
+
+ Create Truss
+
+
+
+
+ Couldn't locate IfcOpenShell
+
+
+
+
+ IfcOpenShell not found or disabled, falling back on internal parser.
+
+
+
+
+ IFC Schema not found, IFC import disabled.
+
+
+
+
+ Error: IfcOpenShell is not installed
+
+
+
+
+ Error: your IfcOpenShell version is too old
+
+
+
+
+ Create Project
+
+
+
+
+ Create Stairs
+
+
+
+
+ Create material
+
+
+
+
+ Create multi-material
+
+
+
+
+
+ Material
+
+
+
+
+ New layer
+
+
+
+
+ Total thickness
+
+
+
+
+ depends on the object
+
+
+
+
+
+ This exporter can currently only export one site object
+
+
+
+
+ Error: Space '%s' has no Zone. Aborting.
+
+
+
+
+ pycollada not found, collada support is disabled.
+
+
+
+
+ file %s successfully created.
+
+
+
+
+ Create Grid
+
+
+
+
+ Auto height is larger than height
+
+
+
+
+ Total row size is larger than height
+
+
+
+
+ Auto width is larger than width
+
+
+
+
+ Total column size is larger than width
+
+
+
+
+ Grid
+
+
+
+
+ Total width
+
+
+
+
+ Total height
+
+
+
+
+ Add row
+
+
+
+
+ Del row
+
+
+
+
+ Add col
+
+
+
+
+ Del col
+
+
+
+
+ Create span
+
+
+
+
+ Remove span
+
+
+
+
+ Rows
+
+
+
+
+ Columns
+
+
+
+
+ Precast elements
+
+
+
+
+ Slab type
+
+
+
+
+ Chamfer
+
+
+
+
+ Dent length
+
+
+
+
+ Dent width
+
+
+
+
+ Dent height
+
+
+
+
+ Slab base
+
+
+
+
+ Number of holes
+
+
+
+
+ Major diameter of holes
+
+
+
+
+ Minor diameter of holes
+
+
+
+
+ Spacing between holes
+
+
+
+
+ Number of grooves
+
+
+
+
+ Depth of grooves
+
+
+
+
+ Height of grooves
+
+
+
+
+ Spacing between grooves
+
+
+
+
+ Number of risers
+
+
+
+
+ Length of down floor
+
+
+
+
+ Height of risers
+
+
+
+
+ Depth of treads
+
+
+
+
+ Precast options
+
+
+
+
+ Dents list
+
+
+
+
+ Add dent
+
+
+
+
+ Remove dent
+
+
+
+
+ Slant
+
+
+
+
+ Level
+
+
+
+
+ Rotation
+
+
+
+
+ Page
+
+
+
+
+
+
+ View of
+
+
+
+
+
+ Create Panel
+
+
+
+
+ Create Panel Cut
+
+
+
+
+ Create Panel Sheet
+
+
+
+
+ Error computing shape of
+
+
+
+
+ Tools
+
+
+
+
+ Edit views positions
+
+
+
+
+ This object has no face
+
+
+
+
+ Curtain Wall
+
+
+
+
+
+ Create Curtain Wall
+
+
+
+
+
+ Create Pipe
+
+
+
+
+ Please select exactly 2 or 3 Pipe objects
+
+
+
+
+ Please select only Pipe objects
+
+
+
+
+ Create Connector
+
+
+
+
+ Unable to build the base path
+
+
+
+
+ Unable to build the profile
+
+
+
+
+ Unable to build the pipe
+
+
+
+
+ The base object is not a Part
+
+
+
+
+ Too many wires in the base shape
+
+
+
+
+ The base wire is closed
+
+
+
+
+ The profile is not a 2D Part
+
+
+
+
+ The profile is not closed
+
+
+
+
+ Only the 3 first wires will be connected
+
+
+
+
+
+ Common vertex not found
+
+
+
+
+ Pipes are already aligned
+
+
+
+
+ At least 2 pipes must align
+
+
+
+
+ Unable to retrieve value from object
+
+
+
+
+ Import CSV File
+
+
+
+
+
+ Export CSV File
+
+
+
+
+ Unable to recognize that file type
+
+
+
+
+
+
+ Description
+
+
+
+
+
+
+
+ Value
+
+
+
+
+
+
+ Unit
+
+
+
+
+ Schedule
+
+
+
+
+ You can put anything but the following objects: Site, Building, and Floor - in a Floor object.
+
+Floor object is not allowed to accept Site, Building, or Floor objects.
+
+Site, Building, and Floor objects will be removed from the selection.
+
+You can change that in the preferences.
+
+
+
+
+ There is no valid object in the selection.
+
+Floor creation aborted.
+
+
+
+
+ Create Floor
+
+
+
+
+ Create Axis
+
+
+
+
+ Distances (mm) and angles (deg) between axes
+
+
+
+
+ Axis
+
+
+
+
+ Distance
+
+
+
+
+ Angle
+
+
+
+
+ Label
+
+
+
+
+
+ Found a shape containing curves, triangulating
+
+
+
+
+ Successfully imported
+
+
+
+
+ Error computing the shape of this object
+
+
+
+
+ has no solid
+
+
+
+
+ has an invalid shape
+
+
+
+
+ has a null shape
+
+
+
+
+ Toggle subcomponents
+
+
+
+
+ Closing Sketch edit
+
+
+
+
+ Component
+
+
+
+
+ Components of this object
+
+
+
+
+ Base component
+
+
+
+
+ Additions
+
+
+
+
+ Subtractions
+
+
+
+
+ Objects
+
+
+
+
+ Fixtures
+
+
+
+
+ Group
+
+
+
+
+ Hosts
+
+
+
+
+ Edit IFC properties
+
+
+
+
+ Edit standard code
+
+
+
+
+ Property
+
+
+
+
+ Add property...
+
+
+
+
+ Add property set...
+
+
+
+
+ New...
+
+
+
+
+ New property
+
+
+
+
+ New property set
+
+
+
+
+
+ Create Rebar
+
+
+
+
+ Please select a base face on a structural object
+
+
+
+
+ Create Section Plane
+
+
+
+
+ Section plane settings
+
+
+
+
+ Remove highlighted objects from the list above
+
+
+
+
+ Add selected
+
+
+
+
+ Add selected object(s) to the scope of this section plane
+
+
+
+
+ Objects seen by this section plane:
+
+
+
+
+ Section plane placement:
+
+
+
+
+ Rotate X
+
+
+
+
+ Rotates the plane along the X axis
+
+
+
+
+ Rotate Y
+
+
+
+
+ Rotates the plane along the Y axis
+
+
+
+
+ Rotate Z
+
+
+
+
+ Rotates the plane along the Z axis
+
+
+
+
+ Resize
+
+
+
+
+ Resizes the plane to fit the objects in the list above
+
+
+
+
+
+ Center
+
+
+
+
+ Centers the plane on the objects in the list above
+
+
+
+
+ You can put anything but Site and Building objects in a Building object.
+
+Building object is not allowed to accept Site and Building objects.
+
+Site and Building objects will be removed from the selection.
+
+You can change that in the preferences.
+
+
+
+
+ There is no valid object in the selection.
+
+Building creation aborted.
+
+
+
+
+ Create Building
+
+
+
+
+ Create Space
+
+
+
+
+ Set text position
+
+
+
+
+ Space boundaries
+
+
+
+
+ Wall
+
+
+
+
+ Walls can only be based on Part or Mesh objects
+
+
+
+
+
+
+ Create Wall
+
+
+
+
+ First point of wall
+
+
+
+
+ Wall options
+
+
+
+
+ Wall Presets...
+
+
+
+
+ This list shows all the MultiMaterials objects of this document. Create some to define wall types.
+
+
+
+
+ Alignment
+
+
+
+
+ Left
+
+
+
+
+ Right
+
+
+
+
+ Use sketches
+
+
+
+
+ Merge Wall
+
+
+
+
+ The selected wall contains no subwall to merge
+
+
+
+
+
+ Please select only wall objects
+
+
+
+
+ Merge Walls
+
+
+
+
+ Cannot compute blocks for wall
+
+
+
+
+ Error: Unable to modify the base object of this wall
+
+
+
+
+ Invalid cutplane
+
+
+
+
+ is not closed
+
+
+
+
+ is not valid
+
+
+
+
+ doesn't contain any solid
+
+
+
+
+ contains a non-closed solid
+
+
+
+
+ contains faces that are not part of any solid
+
+
+
+
+ Survey
+
+
+
+
+ Set description
+
+
+
+
+ Clear
+
+
+
+
+ Copy Length
+
+
+
+
+ Copy Area
+
+
+
+
+ Export CSV
+
+
+
+
+ Area
+
+
+
+
+ Total
+
+
+
+
+ Object doesn't have settable IFC Attributes
+
+
+
+
+ Disabling Brep force flag of object
+
+
+
+
+
+ Enabling Brep force flag of object
+
+
+
+
+ Add space boundary
+
+
+
+
+ Grouping
+
+
+
+
+ Remove space boundary
+
+
+
+
+ Ungrouping
+
+
+
+
+ Split Mesh
+
+
+
+
+ Mesh to Shape
+
+
+
+
+ All good! No problems found
+
+
+
+
+
+ Create Component
+
+
+
+
+ Key
+
+
+
+
+ The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object:
+
+
+
+
+ Create IFC properties spreadsheet
+
+
+
+
+ Arch_StructuresFromSelection
+
+
+ Multiple Structures
+
+
+
+
+ Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path
+
+
+
+
+ Arch_StructuralSystem
+
+
+ Structural System
+
+
+
+
+ Create a structural system object from a selected structure and axis
+
+
+
+
+ Arch_Structure
+
+
+ Structure
+
+
+
+
+ Creates a structure object from scratch or from a selected object (sketch, wire, face or solid)
+
+
+
+
+ App::Property
+
+
+
+ An optional extrusion path for this element
+
+
+
+
+ The computed length of the extrusion path
+
+
+
+
+ Start offset distance along the extrusion path (positive: extend, negative: trim)
+
+
+
+
+ End offset distance along the extrusion path (positive: extend, negative: trim)
+
+
+
+
+ Automatically align the Base of the Structure perpendicular to the Tool axis
+
+
+
+
+ X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True)
+
+
+
+
+ Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True)
+
+
+
+
+ Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True)
+
+
+
+
+ Base rotation around the Tool axis (only used if BasePerpendicularToTool is True)
+
+
+
+
+
+ The length of this element, if not based on a profile
+
+
+
+
+
+ The width of this element, if not based on a profile
+
+
+
+
+ The height or extrusion depth of this element. Keep 0 for automatic
+
+
+
+
+
+
+ The normal extrusion direction of this object (keep (0,0,0) for automatic normal)
+
+
+
+
+
+ The structural nodes of this element
+
+
+
+
+ A description of the standard profile this element is based upon
+
+
+
+
+ Offset distance between the centerline and the nodes line
+
+
+
+
+
+ The facemaker type to use to build the profile of this object
+
+
+
+
+ If the nodes are visible or not
+
+
+
+
+ The width of the nodes line
+
+
+
+
+ The size of the node points
+
+
+
+
+ The color of the nodes line
+
+
+
+
+ The type of structural node
+
+
+
+
+ Axes systems this structure is built on
+
+
+
+
+ The element numbers to exclude when this structure is based on axes
+
+
+
+
+ If true the element are aligned with axes
+
+
+
+
+ The model description of this equipment
+
+
+
+
+ The URL of the product page of this equipment
+
+
+
+
+
+ A standard code (MasterFormat, OmniClass,...)
+
+
+
+
+ Additional snap points for this equipment
+
+
+
+
+ The electric power needed by this equipment in Watts
+
+
+
+
+
+
+ The type of this building
+
+
+
+
+
+ The height of this object
+
+
+
+
+ If true, the height value propagates to contained objects
+
+
+
+
+ The level of the (0,0,0) point of this level
+
+
+
+
+
+ The computed floor area of this floor
+
+
+
+
+
+ An optional description for this component
+
+
+
+
+
+ An optional tag for this component
+
+
+
+
+
+ The shape of this object
+
+
+
+
+ This property stores an inventor representation for this object
+
+
+
+
+ If true, only solids will be collected by this object when referenced from other files
+
+
+
+
+ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files
+
+
+
+
+
+ The line width of this object
+
+
+
+
+ An optional unit to express levels
+
+
+
+
+ A transformation to apply to the level mark
+
+
+
+
+ If true, show the level
+
+
+
+
+ If true, show the unit on the level tag
+
+
+
+
+ If true, display offset will affect the origin mark too
+
+
+
+
+ If true, the object's label is displayed
+
+
+
+
+ The font to be used for texts
+
+
+
+
+ The font size of texts
+
+
+
+
+ The individual face colors
+
+
+
+
+ If true, when activated, the working plane will automatically adapt to this level
+
+
+
+
+ If set to True, the working plane will be kept on Auto mode
+
+
+
+
+ Camera position data associated with this object
+
+
+
+
+ If set, the view stored in this object will be restored on double-click
+
+
+
+
+ If True, double-clicking this object in the tree activates it
+
+
+
+
+ If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode.
+
+
+
+
+ A slot to save the inventor representation of this object, if enabled
+
+
+
+
+ If true, show the objects contained in this Building Part will adopt these line, color and transparency settings
+
+
+
+
+ The line width of child objects
+
+
+
+
+ The line color of child objects
+
+
+
+
+ The shape color of child objects
+
+
+
+
+ The transparency of child objects
+
+
+
+
+ Cut the view above this level
+
+
+
+
+ The distance between the level plane and the cut line
+
+
+
+
+ Turn cutting on when activating this level
+
+
+
+
+ The capture box for newly created objects expressed as [XMin,YMin,ZMin,XMax,YMax,ZMax]
+
+
+
+
+ Turns auto group box on/off
+
+
+
+
+ Automatically set size from contents
+
+
+
+
+ A margin to use when autosize is turned on
+
+
+
+
+ Outside Diameter
+
+
+
+
+ Wall thickness
+
+
+
+
+
+
+
+
+
+ Width of the beam
+
+
+
+
+
+
+
+
+
+ Height of the beam
+
+
+
+
+
+ Thickness of the web
+
+
+
+
+
+ Thickness of the flanges
+
+
+
+
+ Thickness of the sides
+
+
+
+
+ Thickness of the webs
+
+
+
+
+ Thickness of the flange
+
+
+
+
+ Thickness of the legs
+
+
+
+
+ The base terrain of this site
+
+
+
+
+ The street and house number of this site, with postal box or apartment number if needed
+
+
+
+
+ The postal or zip code of this site
+
+
+
+
+ The city of this site
+
+
+
+
+ The region, province or county of this site
+
+
+
+
+ The country of this site
+
+
+
+
+
+ The latitude of this site
+
+
+
+
+ Angle between the true North and the North direction in this document
+
+
+
+
+ The elevation of level 0 of this site
+
+
+
+
+ A url that shows this site in a mapping website
+
+
+
+
+
+ Other shapes that are appended to this object
+
+
+
+
+
+ Other shapes that are subtracted from this object
+
+
+
+
+
+ The area of the projection of this object onto the XY plane
+
+
+
+
+ The perimeter length of this terrain
+
+
+
+
+ The volume of earth to be added to this terrain
+
+
+
+
+ The volume of earth to be removed from this terrain
+
+
+
+
+ An extrusion vector to use when performing boolean operations
+
+
+
+
+ Remove splitters from the resulting shape
+
+
+
+
+ An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates
+
+
+
+
+
+ The type of this object
+
+
+
+
+ The time zone where this site is located
+
+
+
+
+ An optional EPW File for the location of this site. Refer to the Site documentation to know how to obtain one
+
+
+
+
+ Show wind rose diagram or not. Uses solar diagram scale. Needs Ladybug module
+
+
+
+
+ Show solar diagram or not
+
+
+
+
+ The scale of the solar diagram
+
+
+
+
+ The position of the solar diagram
+
+
+
+
+ The color of the solar diagram
+
+
+
+
+ When set to 'True North' the whole geometry will be rotated to match the true north of this site
+
+
+
+
+ Show compass or not
+
+
+
+
+ The rotation of the Compass relative to the Site
+
+
+
+
+ The position of the Compass relative to the Site placement
+
+
+
+
+ Update the Declination value based on the compass rotation
+
+
+
+
+ The list of angles of the roof segments
+
+
+
+
+ The list of horizontal length projections of the roof segments
+
+
+
+
+ The list of IDs of the relative profiles of the roof segments
+
+
+
+
+ The list of thicknesses of the roof segments
+
+
+
+
+ The list of overhangs of the roof segments
+
+
+
+
+ The list of calculated heights of the roof segments
+
+
+
+
+ The face number of the base object used to build the roof
+
+
+
+
+ The total length of the ridges and hips of the roof
+
+
+
+
+ The total length of the borders of the roof
+
+
+
+
+ Specifies if the direction of the roof should be flipped
+
+
+
+
+ The base file this component is built upon
+
+
+
+
+ The part to use from the base file
+
+
+
+
+ The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation
+
+
+
+
+ Fuse objects of same material
+
+
+
+
+ The latest time stamp of the linked file
+
+
+
+
+ If true, the colors from the linked file will be kept updated
+
+
+
+
+ The profile used to build this frame
+
+
+
+
+ Specifies if the profile must be aligned with the extrusion wires
+
+
+
+
+ An offset vector between the base sketch and the frame
+
+
+
+
+ Crossing point of the path on the profile.
+
+
+
+
+ An optional additional placement to add to the profile before extruding it
+
+
+
+
+ The rotation of the profile around its extrusion axis
+
+
+
+
+ The type of edges to consider
+
+
+
+
+ If true, geometry is fused, otherwise a compound
+
+
+
+
+ The objects that host this window
+
+
+
+
+ The components of this window
+
+
+
+
+ The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically.
+
+
+
+
+ An optional object that defines a volume to be subtracted from hosts of this window
+
+
+
+
+ The width of this window
+
+
+
+
+ The height of this window
+
+
+
+
+ The normal direction of this window
+
+
+
+
+ The preset number this window is based on
+
+
+
+
+ The frame size of this window
+
+
+
+
+ The offset size of this window
+
+
+
+
+ The area of this window
+
+
+
+
+ The width of louvre elements
+
+
+
+
+ The space between louvre elements
+
+
+
+
+ Opens the subcomponents that have a hinge defined
+
+
+
+
+ The number of the wire that defines the hole. If 0, the value will be calculated automatically
+
+
+
+
+ Shows plan opening symbols if available
+
+
+
+
+ Show elevation opening symbols if available
+
+
+
+
+ The number of the wire that defines the hole. A value of 0 means automatic
+
+
+
+
+ The axes this system is made of
+
+
+
+
+ The placement of this axis system
+
+
+
+
+ The angle of the truss
+
+
+
+
+ The slant type of this truss
+
+
+
+
+ The normal direction of this truss
+
+
+
+
+ The height of the truss at the start position
+
+
+
+
+ The height of the truss at the end position
+
+
+
+
+ An optional start offset for the top strut
+
+
+
+
+ An optional end offset for the top strut
+
+
+
+
+ The height of the main top and bottom elements of the truss
+
+
+
+
+ The width of the main top and bottom elements of the truss
+
+
+
+
+ The type of the middle element of the truss
+
+
+
+
+ The direction of the rods
+
+
+
+
+ The diameter or side of the rods
+
+
+
+
+ The number of rod sections
+
+
+
+
+ If the truss has a rod at its endpoint or not
+
+
+
+
+ How to draw the rods
+
+
+
+
+ The length of these stairs, if no baseline is defined
+
+
+
+
+ The width of these stairs
+
+
+
+
+ The total height of these stairs
+
+
+
+
+ The alignment of these stairs on their baseline, if applicable
+
+
+
+
+ The width of a Landing (Second edge and after - First edge follows Width property)
+
+
+
+
+ The number of risers in these stairs
+
+
+
+
+ The depth of the treads of these stairs
+
+
+
+
+ The height of the risers of these stairs
+
+
+
+
+ The size of the nosing
+
+
+
+
+ The thickness of the treads
+
+
+
+
+ The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in
+
+
+
+
+ The thickness of the risers
+
+
+
+
+ The depth of the landing of these stairs
+
+
+
+
+ The depth of the treads of these stairs - Enforced regardless of Length or edge's Length
+
+
+
+
+ The height of the risers of these stairs - Enforced regardless of Height or edge's Height
+
+
+
+
+ The direction of flight after landing
+
+
+
+
+ The 'absolute' top level of a flight of stairs leads to
+
+
+
+
+
+ The 'left outline' of stairs
+
+
+
+
+ The 'left outline' of all segments of stairs
+
+
+
+
+ The 'right outline' of all segments of stairs
+
+
+
+
+ The type of landings of these stairs
+
+
+
+
+ The type of winders in these stairs
+
+
+
+
+ The type of structure of these stairs
+
+
+
+
+ The thickness of the massive structure or of the stringers
+
+
+
+
+ The width of the stringers
+
+
+
+
+ The offset between the border of the stairs and the structure
+
+
+
+
+
+ The overlap of the stringers above the bottom of the treads
+
+
+
+
+ The thickness of the lower floor slab
+
+
+
+
+ The thickness of the upper floor slab
+
+
+
+
+ The type of connection between the lower slab and the start of the stairs
+
+
+
+
+ The type of connection between the end of the stairs and the upper floor slab
+
+
+
+
+ A single section of the fence
+
+
+
+
+ A single fence post
+
+
+
+
+ The Path the fence should follow
+
+
+
+
+ The number of sections the fence is built of
+
+
+
+
+ The number of posts used to build the fence
+
+
+
+
+ When true, the fence will be colored like the original post and section.
+
+
+
+
+
+ A description for this material
+
+
+
+
+ A URL where to find information about this material
+
+
+
+
+ The transparency value of this material
+
+
+
+
+ The color of this material
+
+
+
+
+ The color of this material when cut
+
+
+
+
+ The list of layer names
+
+
+
+
+ The list of layer materials
+
+
+
+
+ The list of layer thicknesses
+
+
+
+
+ IFC data
+
+
+
+
+ IFC properties of this object
+
+
+
+
+
+ Description of IFC attributes are not yet implemented
+
+
+
+
+ The length of this element
+
+
+
+
+ The width of this element
+
+
+
+
+ The height of this element
+
+
+
+
+
+
+ The size of the chamfer of this element
+
+
+
+
+ The dent length of this element
+
+
+
+
+
+ The dent height of this element
+
+
+
+
+
+ The dents of this element
+
+
+
+
+ The chamfer length of this element
+
+
+
+
+ The base length of this element
+
+
+
+
+ The groove depth of this element
+
+
+
+
+ The groove height of this element
+
+
+
+
+ The spacing between the grooves of this element
+
+
+
+
+ The number of grooves of this element
+
+
+
+
+ The dent width of this element
+
+
+
+
+ The type of this slab
+
+
+
+
+ The size of the base of this element
+
+
+
+
+ The number of holes in this element
+
+
+
+
+ The major radius of the holes of this element
+
+
+
+
+ The minor radius of the holes of this element
+
+
+
+
+ The spacing between the holes of this element
+
+
+
+
+ The length of the down floor of this element
+
+
+
+
+ The number of risers in this element
+
+
+
+
+ The riser height of this element
+
+
+
+
+ The tread depth of this element
+
+
+
+
+ The thickness or extrusion depth of this element
+
+
+
+
+ The number of sheets to use
+
+
+
+
+ The offset between this panel and its baseline
+
+
+
+
+ The length of waves for corrugated elements
+
+
+
+
+ The height of waves for corrugated elements
+
+
+
+
+ The horizontal offset of waves for corrugated elements
+
+
+
+
+ The direction of waves for corrugated elements
+
+
+
+
+ The type of waves for corrugated elements
+
+
+
+
+ If the wave also affects the bottom side or not
+
+
+
+
+ The area of this panel
+
+
+
+
+
+
+ The linked object
+
+
+
+
+
+ The line width of the rendered objects
+
+
+
+
+ The color of the panel outline
+
+
+
+
+
+
+ The size of the tag text
+
+
+
+
+ The color of the tag text
+
+
+
+
+ The X offset of the tag text
+
+
+
+
+ The Y offset of the tag text
+
+
+
+
+
+
+ The font of the tag text
+
+
+
+
+ The text to display. Can be %tag%, %label% or %description% to display the panel tag or label
+
+
+
+
+
+ The position of the tag text. Keep (0,0,0) for center position
+
+
+
+
+
+ The rotation of the tag text
+
+
+
+
+
+ If True, the object is rendered as a face, if possible.
+
+
+
+
+ The allowed angles this object can be rotated to when placed on sheets
+
+
+
+
+ An offset value to move the cut plane from the center point
+
+
+
+
+
+ A margin inside the boundary
+
+
+
+
+
+ Turns the display of the margin on/off
+
+
+
+
+ The linked Panel cuts
+
+
+
+
+ The tag text to display
+
+
+
+
+ The font file
+
+
+
+
+ The width of the sheet
+
+
+
+
+ The height of the sheet
+
+
+
+
+ The fill ratio of this sheet
+
+
+
+
+ Specifies an angle for the wood grain (Clockwise, 0 is North)
+
+
+
+
+ Specifies the scale applied to each panel view.
+
+
+
+
+ A list of possible rotations for the nester
+
+
+
+
+ Turns the display of the wood grain texture on/off
+
+
+
+
+ An optional host object for this curtain wall
+
+
+
+
+ The height of the curtain wall, if based on an edge
+
+
+
+
+ The number of vertical mullions
+
+
+
+
+ If the profile of the vertical mullions get aligned with the surface or not
+
+
+
+
+ The number of vertical sections of this curtain wall
+
+
+
+
+ The height of the vertical mullions profile, if no profile is used
+
+
+
+
+ The width of the vertical mullions profile, if no profile is used
+
+
+
+
+ A profile for vertical mullions (disables vertical mullion size)
+
+
+
+
+ The number of horizontal mullions
+
+
+
+
+ If the profile of the horizontal mullions gets aligned with the surface or not
+
+
+
+
+ The number of horizontal sections of this curtain wall
+
+
+
+
+ The height of the horizontal mullions profile, if no profile is used
+
+
+
+
+ The width of the horizontal mullions profile, if no profile is used
+
+
+
+
+ A profile for horizontal mullions (disables horizontal mullion size)
+
+
+
+
+ The number of diagonal mullions
+
+
+
+
+ The size of the diagonal mullions, if any, if no profile is used
+
+
+
+
+ A profile for diagonal mullions, if any (disables horizontal mullion size)
+
+
+
+
+ The number of panels
+
+
+
+
+ The thickness of the panels
+
+
+
+
+ Swaps horizontal and vertical lines
+
+
+
+
+ Perform subtractions between components so none overlap
+
+
+
+
+ Centers the profile over the edges or not
+
+
+
+
+ The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall
+
+
+
+
+ The diameter of this pipe, if not based on a profile
+
+
+
+
+ The length of this pipe, if not based on an edge
+
+
+
+
+ An optional closed profile to base this pipe on
+
+
+
+
+ Offset from the start point
+
+
+
+
+ Offset from the end point
+
+
+
+
+ The wall thickness of this pipe, if not based on a profile
+
+
+
+
+ The curvature radius of this connector
+
+
+
+
+ The pipes linked by this connector
+
+
+
+
+ The type of this connector
+
+
+
+
+ The description column
+
+
+
+
+ The values column
+
+
+
+
+ The units column
+
+
+
+
+ The objects column
+
+
+
+
+ The filter column
+
+
+
+
+ If True, a spreadsheet containing the results is recreated when needed
+
+
+
+
+ The spreadsheet to print the results to
+
+
+
+
+ If True, additional lines with each individual object are added to the results
+
+
+
+
+
+ The placement of this object
+
+
+
+
+ The intervals between axes
+
+
+
+
+ The angles of each axis
+
+
+
+
+ The label of each axis
+
+
+
+
+ An optional custom bubble number
+
+
+
+
+ The length of the axes
+
+
+
+
+ If not zero, the axes are not represented as one full line but as two lines of the given length
+
+
+
+
+ The size of the axis bubbles
+
+
+
+
+ The numbering style
+
+
+
+
+ The type of line to draw this axis
+
+
+
+
+ Where to add bubbles to this axis: Start, end, both or none
+
+
+
+
+ The line width to draw this axis
+
+
+
+
+ The color of this axis
+
+
+
+
+ The number of the first axis
+
+
+
+
+ The font to use for texts
+
+
+
+
+ The font size
+
+
+
+
+ If true, show the labels
+
+
+
+
+ A transformation to apply to each label
+
+
+
+
+ The base object this component is built upon
+
+
+
+
+ The object this component is cloning
+
+
+
+
+ An optional standard (OmniClass, etc...) code for this component
+
+
+
+
+ A material for this object
+
+
+
+
+ Specifies if moving this object moves its base instead
+
+
+
+
+ Specifies if this object must move together when its host is moved
+
+
+
+
+ The area of all vertical faces of this object
+
+
+
+
+ The perimeter length of the horizontal area
+
+
+
+
+ An optional higher-resolution mesh or shape for this object
+
+
+
+
+ An optional axis or axis system on which this object should be duplicated
+
+
+
+
+ Use the material color as this object's shape color, if available
+
+
+
+
+ The diameter of the bar
+
+
+
+
+ The distance between the border of the beam and the first bar (concrete cover).
+
+
+
+
+ The distance between the border of the beam and the last bar (concrete cover).
+
+
+
+
+ The amount of bars
+
+
+
+
+ The spacing between the bars
+
+
+
+
+ The total distance to span the rebars over. Keep 0 to automatically use the host shape size.
+
+
+
+
+ The direction to use to spread the bars. Keep (0,0,0) for automatic direction.
+
+
+
+
+ The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter.
+
+
+
+
+ List of placement of all the bars
+
+
+
+
+ The structure object that hosts this rebar
+
+
+
+
+ The custom spacing of rebar
+
+
+
+
+ Length of a single rebar
+
+
+
+
+ Total length of all rebars
+
+
+
+
+ The rebar mark
+
+
+
+
+ Shape of rebar
+
+
+
+
+ The objects that must be considered by this section plane. Empty means the whole document.
+
+
+
+
+ If false, non-solids will be cut too, with possible wrong results.
+
+
+
+
+ If True, resulting views will be clipped to the section plane area.
+
+
+
+
+ If true, the color of the objects material will be used to fill cut areas.
+
+
+
+
+ Geometry further than this value will be cut off. Keep zero for unlimited.
+
+
+
+
+ The display length of this section plane
+
+
+
+
+ The display height of this section plane
+
+
+
+
+ The size of the arrows of this section plane
+
+
+
+
+ The transparency of this object
+
+
+
+
+
+ Show the cut in the 3D view
+
+
+
+
+ The color of this object
+
+
+
+
+ The distance between the cut plane and the actual view cut (keep this a very small value but not zero)
+
+
+
+
+ Show the label in the 3D view
+
+
+
+
+
+ The name of the font
+
+
+
+
+
+ The size of the text font
+
+
+
+
+ The rendering mode to use
+
+
+
+
+ If cut geometry is shown or not
+
+
+
+
+ If cut geometry is filled or not
+
+
+
+
+ The size of the texts inside this object
+
+
+
+
+ If checked, source objects are displayed regardless of being visible in the 3D model
+
+
+
+
+ The line color of the projected objects
+
+
+
+
+ The color of the cut faces (if turned on)
+
+
+
+
+ The objects that make the boundaries of this space object
+
+
+
+
+ The computed floor area of this space
+
+
+
+
+ The finishing of the floor of this space
+
+
+
+
+ The finishing of the walls of this space
+
+
+
+
+ The finishing of the ceiling of this space
+
+
+
+
+ Objects that are included inside this space, such as furniture
+
+
+
+
+ The type of this space
+
+
+
+
+ The thickness of the floor finish
+
+
+
+
+ The number of people who typically occupy this space
+
+
+
+
+ The electric power needed to light this space in Watts
+
+
+
+
+ The electric power needed by the equipment of this space in Watts
+
+
+
+
+ If True, Equipment Power will be automatically filled by the equipment included in this space
+
+
+
+
+ The type of air conditioning of this space
+
+
+
+
+ Specifies if this space is internal or external
+
+
+
+
+ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data
+
+
+
+
+ The color of the area text
+
+
+
+
+ The size of the first line of text
+
+
+
+
+ The space between the lines of text
+
+
+
+
+ The position of the text. Leave (0,0,0) for automatic position
+
+
+
+
+ The justification of the text
+
+
+
+
+ The number of decimals to use for calculated texts
+
+
+
+
+ Show the unit suffix
+
+
+
+
+ The length of this wall. Not used if this wall is based on an underlying object
+
+
+
+
+ The width of this wall. Not used if this wall is based on a face
+
+
+
+
+ This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed)
+
+
+
+
+ This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed)
+
+
+
+
+ The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid
+
+
+
+
+ The area of this wall as a simple Height * Length calculation
+
+
+
+
+ The alignment of this wall on its base object, if applicable
+
+
+
+
+ The face number of the base object used to build this wall
+
+
+
+
+ The offset between this wall and its baseline (only for left and right alignments)
+
+
+
+
+ Enable this to make the wall generate blocks
+
+
+
+
+ The length of each block
+
+
+
+
+ The height of each block
+
+
+
+
+ The horizontal offset of the first line of blocks
+
+
+
+
+ The horizontal offset of the second line of blocks
+
+
+
+
+ The size of the joints between each block
+
+
+
+
+ The number of entire blocks
+
+
+
+
+ The number of broken blocks
+
+
+
+
+ Arch_StructureTools
+
+
+
+ Structure tools
+
+
+
+
+ Arch_Equipment
+
+
+ Equipment
+
+
+
+
+ Creates an equipment object from a selected object (Part or Mesh)
+
+
+
+
+ Arch_3Views
+
+
+ 3 views from mesh
+
+
+
+
+ Creates 3 views (top, front, side) from a mesh-based object
+
+
+
+
+ Arch_BuildingPart
+
+
+ BuildingPart
+
+
+
+
+ Creates a BuildingPart object including selected objects
+
+
+
+
+ Draft
+
+
+ Writing camera position
+
+
+
+
+
+
+
+ Draft
+
+
+
+
+
+
+ Import-Export
+
+
+
+
+ Workbench
+
+
+ Structure tools
+
+
+
+
+ Axis tools
+
+
+
+
+ Panel tools
+
+
+
+
+ Material tools
+
+
+
+
+ Pipe tools
+
+
+
+
+ Rebar tools
+
+
+
+
+ Arch tools
+
+
+
+
+ Draft creation tools
+
+
+
+
+ Draft annotation tools
+
+
+
+
+ Draft modification tools
+
+
+
+
+ Draft snap
+
+
+
+
+
+ &Arch
+
+
+
+
+
+ Utilities
+
+
+
+
+
+
+
+ &Draft
+
+
+
+
+ Creation
+
+
+
+
+ Annotation
+
+
+
+
+ Modification
+
+
+
+
+ Arch_RebarTools
+
+
+ Rebar tools
+
+
+
+
+ Create various types of rebars, including U-shaped, L-shaped, and stirrup
+
+
+
+
+ Arch_Profile
+
+
+ Profile
+
+
+
+
+ Creates a profile object
+
+
+
+
+ Arch_Site
+
+
+ Site
+
+
+
+
+ Creates a site object including selected objects.
+
+
+
+
+ Arch_Roof
+
+
+ Roof
+
+
+
+
+ Creates a roof object from the selected wire.
+
+
+
+
+ Arch_CutLine
+
+
+ Cut with line
+
+
+
+
+ Cut an object with a line
+
+
+
+
+ Arch_CutPlane
+
+
+ Cut with plane
+
+
+
+
+ Cut an object with a plane
+
+
+
+
+ Arch_Reference
+
+
+ External reference
+
+
+
+
+ Creates an external reference object
+
+
+
+
+ Arch_Frame
+
+
+ Frame
+
+
+
+
+ Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order.
+
+
+
+
+ Arch_Window
+
+
+ Window
+
+
+
+
+ Creates a window object from a selected object (wire, rectangle or sketch)
+
+
+
+
+ Arch_AxisSystem
+
+
+ Axis System
+
+
+
+
+ Creates an axis system from a set of axes
+
+
+
+
+ Arch_Truss
+
+
+ Truss
+
+
+
+
+ Creates a truss object from selected line or from scratch
+
+
+
+
+ Arch_Project
+
+
+ Project
+
+
+
+
+ Creates a project entity aggregating the selected sites.
+
+
+
+
+ Arch_Stairs
+
+
+ Stairs
+
+
+
+
+ Arch_Space
+
+
+ Creates a stairs object
+
+
+
+
+ Space
+
+
+
+
+ Creates a space object from selected boundary objects
+
+
+
+
+ Arch_Fence
+
+
+ Fence
+
+
+
+
+ Creates a fence object from a selected section, post and path
+
+
+
+
+ Arch_Material
+
+
+ Material
+
+
+
+
+ Creates or edits the material definition of a selected object.
+
+
+
+
+ Arch_MultiMaterial
+
+
+ Multi-Material
+
+
+
+
+ Creates or edits multi-materials
+
+
+
+
+ Arch_MaterialTools
+
+
+
+ Material tools
+
+
+
+
+ Arch_Grid
+
+
+ Grid
+
+
+
+
+ Creates a customizable grid object
+
+
+
+
+ The number of rows
+
+
+
+
+ The number of columns
+
+
+
+
+ The sizes for rows
+
+
+
+
+ The sizes of columns
+
+
+
+
+ The span ranges of cells that are merged together
+
+
+
+
+ The type of 3D points produced by this grid object
+
+
+
+
+ The total width of this grid
+
+
+
+
+ The total height of this grid
+
+
+
+
+ Creates automatic column divisions (set to 0 to disable)
+
+
+
+
+ Creates automatic row divisions (set to 0 to disable)
+
+
+
+
+ When in edge midpoint mode, if this grid must reorient its children along edge normals or not
+
+
+
+
+ The indices of faces to hide
+
+
+
+
+ Arch_Panel
+
+
+ Panel
+
+
+
+
+ Creates a panel object from scratch or from a selected object (sketch, wire, face or solid)
+
+
+
+
+ Arch_Panel_Cut
+
+
+ Panel Cut
+
+
+
+
+ Creates 2D views of selected panels
+
+
+
+
+ Arch_Panel_Sheet
+
+
+ Panel Sheet
+
+
+
+
+ Creates a 2D sheet which can contain panel cuts
+
+
+
+
+ Arch_Nest
+
+
+ Nest
+
+
+
+
+ Nests a series of selected shapes in a container
+
+
+
+
+ Arch_PanelTools
+
+
+
+ Panel tools
+
+
+
+
+ Arch_CurtainWall
+
+
+ Curtain Wall
+
+
+
+
+ Creates a curtain wall object from selected line or from scratch
+
+
+
+
+ Arch_Pipe
+
+
+ Pipe
+
+
+
+
+ Creates a pipe object from a given Wire or Line
+
+
+
+
+ Arch_PipeConnector
+
+
+ Connector
+
+
+
+
+ Creates a connector between 2 or 3 selected pipes
+
+
+
+
+ Arch_PipeTools
+
+
+
+ Pipe tools
+
+
+
+
+ Arch_Schedule
+
+
+ Schedule
+
+
+
+
+ Creates a schedule to collect data from the model
+
+
+
+
+ Arch_Floor
+
+
+ Level
+
+
+
+
+ Creates a Building Part object that represents a level, including selected objects
+
+
+
+
+ Arch_Axis
+
+
+ Axis
+
+
+
+
+ Creates a set of axes
+
+
+
+
+ Arch_AxisTools
+
+
+
+ Axis tools
+
+
+
+
+ Arch_Rebar
+
+
+ Custom Rebar
+
+
+
+
+ Creates a Reinforcement bar from the selected face of solid object and/or a sketch
+
+
+
+
+ Arch_SectionPlane
+
+
+ Section Plane
+
+
+
+
+ Creates a section plane object, including the selected objects
+
+
+
+
+ Arch_Building
+
+
+ Building
+
+
+
+
+ Creates a building object including selected objects.
+
+
+
+
+ Arch_Wall
+
+
+ Wall
+
+
+
+
+ Creates a wall object from scratch or from a selected object (wire, face or solid)
+
+
+
+
+ Arch_MergeWalls
+
+
+ Merge Walls
+
+
+
+
+ Merges the selected walls, if possible
+
+
+
+
+ Arch_Add
+
+
+ Add component
+
+
+
+
+ Adds the selected components to the active object
+
+
+
+
+ Arch_Remove
+
+
+ Remove component
+
+
+
+
+ Remove the selected components from their parents, or create a hole in a component
+
+
+
+
+ Arch_SplitMesh
+
+
+ Split Mesh
+
+
+
+
+ Splits selected meshes into independent components
+
+
+
+
+ Arch_MeshToShape
+
+
+ Mesh to Shape
+
+
+
+
+ Turns selected meshes into Part Shape objects
+
+
+
+
+ Arch_SelectNonSolidMeshes
+
+
+ Select non-manifold meshes
+
+
+
+
+ Selects all non-manifold meshes from the document or from the selected groups
+
+
+
+
+ Arch_RemoveShape
+
+
+ Remove Shape from Arch
+
+
+
+
+ Removes cubic shapes from Arch components
+
+
+
+
+ Arch_CloseHoles
+
+
+ Close holes
+
+
+
+
+ Closes holes in open shapes, turning them solids
+
+
+
+
+ Arch_Check
+
+
+ Check
+
+
+
+
+ Checks the selected objects for problems
+
+
+
+
+ Arch_Survey
+
+
+ Survey
+
+
+
+
+ Starts survey
+
+
+
+
+ Arch_ToggleIfcBrepFlag
+
+
+ Toggle IFC Brep flag
+
+
+
+
+ Force an object to be exported as Brep or not
+
+
+
+
+ Arch_Component
+
+
+ Component
+
+
+
+
+ Creates an undefined architectural component
+
+
+
+
+ Arch_CloneComponent
+
+
+ Clone component
+
+
+
+
+ Clones an object as an undefined architectural component
+
+
+
+
+ Arch_IfcSpreadsheet
+
+
+ Create IFC spreadsheet...
+
+
+
+
+ Creates a spreadsheet to store IFC properties of an object.
+
+
+
+
+ Arch_ToggleSubs
+
+
+ Toggle subcomponents
+
+
+
+
+ Shows or hides the subcomponents of this object
+
+
+
diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts
index a78c39243e..776d8619fe 100644
--- a/src/Mod/Draft/Resources/translations/Draft.ts
+++ b/src/Mod/Draft/Resources/translations/Draft.ts
@@ -1487,6 +1487,7 @@ such as "Arial:Bold"
+
@@ -1494,7 +1495,6 @@ such as "Arial:Bold"
-
mm
@@ -1806,9 +1806,9 @@ from the Addon Manager.
-
-
+
+
Import options
@@ -2007,8 +2007,8 @@ If it is set to '0' the whole spline is treated as a straight segment.
-
+
Export options
@@ -2545,4 +2545,5301 @@ This might fail for post DXF R12 templates.
+
+ draft
+
+
+
+ Relative
+
+
+
+
+
+ Global
+
+
+
+
+
+
+ Continue
+
+
+
+
+
+ Close
+
+
+
+
+
+
+
+
+
+
+ Copy
+
+
+
+
+ Subelement mode
+
+
+
+
+ Fill
+
+
+
+
+ Exit
+
+
+
+
+ Snap On/Off
+
+
+
+
+ Increase snap radius
+
+
+
+
+ Decrease snap radius
+
+
+
+
+ Restrict X
+
+
+
+
+ Restrict Y
+
+
+
+
+ Restrict Z
+
+
+
+
+
+ Select edge
+
+
+
+
+ Add custom snap point
+
+
+
+
+ Length mode
+
+
+
+
+
+ Wipe
+
+
+
+
+ Set Working Plane
+
+
+
+
+ Cycle snap object
+
+
+
+
+ Undo last segment
+
+
+
+
+ Draft Command Bar
+
+
+
+
+
+
+ Top
+
+
+
+
+
+
+ Front
+
+
+
+
+
+
+ Side
+
+
+
+
+ Auto
+
+
+
+
+
+
+
+
+
+
+ None
+
+
+
+
+ active command:
+
+
+
+
+ Active Draft command
+
+
+
+
+ X coordinate of next point
+
+
+
+
+
+ X
+
+
+
+
+ Y
+
+
+
+
+ Z
+
+
+
+
+ Y coordinate of next point
+
+
+
+
+ Z coordinate of next point
+
+
+
+
+ Enter point
+
+
+
+
+ Enter a new point with the given coordinates
+
+
+
+
+ Length
+
+
+
+
+
+ Angle
+
+
+
+
+ Length of current segment
+
+
+
+
+ Angle of current segment
+
+
+
+
+ Check this to lock the current angle
+
+
+
+
+
+ Radius
+
+
+
+
+
+ Radius of Circle
+
+
+
+
+ Coordinates relative to last point or to coordinate system origin
+if is the first point to set
+
+
+
+
+ Coordinates relative to global coordinate system.
+Uncheck to use working plane coordinate system
+
+
+
+
+ Filled
+
+
+
+
+ Check this if the object should appear as filled, otherwise it will appear as wireframe.
+Not available if Draft preference option 'Use Part Primitives' is enabled
+
+
+
+
+ Finish
+
+
+
+
+ Finishes the current drawing or editing operation
+
+
+
+
+ If checked, command will not finish until you press the command button again
+
+
+
+
+ If checked, an OCC-style offset will be performed instead of the classic offset
+
+
+
+
+ &OCC-style offset
+
+
+
+
+ &Undo
+
+
+
+
+ Undo the last segment
+
+
+
+
+ Finishes and closes the current line
+
+
+
+
+ Wipes the existing segments of this line and starts again from the last point
+
+
+
+
+ Set WP
+
+
+
+
+ Reorients the working plane on the last segment
+
+
+
+
+ Selects an existing edge to be measured by this dimension
+
+
+
+
+ Sides
+
+
+
+
+ Number of sides
+
+
+
+
+ If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands
+
+
+
+
+ Modify subelements
+
+
+
+
+ If checked, subelements will be modified instead of entire objects
+
+
+
+
+ Text string to draw
+
+
+
+
+ String
+
+
+
+
+ Height of text
+
+
+
+
+ Height
+
+
+
+
+ Intercharacter spacing
+
+
+
+
+ Tracking
+
+
+
+
+ Full path to font file:
+
+
+
+
+ Open a FileChooser for font file
+
+
+
+
+ Create text
+
+
+
+
+ Press this button to create the text object, or finish your text with two blank lines
+
+
+
+
+
+
+
+
+ Current working plane
+
+
+
+
+ Change default style for new objects
+
+
+
+
+ Toggle construction mode
+
+
+
+
+
+
+ Autogroup off
+
+
+
+
+ Line
+
+
+
+
+ DWire
+
+
+
+
+ Circle
+
+
+
+
+ Arc
+
+
+
+
+
+ Rotate
+
+
+
+
+ Point
+
+
+
+
+ Label
+
+
+
+
+
+
+
+
+ Offset
+
+
+
+
+
+
+ Distance
+
+
+
+
+
+
+ Offset distance
+
+
+
+
+ Trimex
+
+
+
+
+ Pick Object
+
+
+
+
+ Local u0394X
+
+
+
+
+ Local u0394Y
+
+
+
+
+ Local u0394Z
+
+
+
+
+ Local X
+
+
+
+
+ Local Y
+
+
+
+
+ Local Z
+
+
+
+
+ Global u0394X
+
+
+
+
+ Global u0394Y
+
+
+
+
+ Global u0394Z
+
+
+
+
+ Global X
+
+
+
+
+ Global Y
+
+
+
+
+ Global Z
+
+
+
+
+ Invalid Size value. Using 200.0.
+
+
+
+
+ Invalid Tracking value. Using 0.
+
+
+
+
+ Please enter a text string.
+
+
+
+
+ Select a Font file
+
+
+
+
+ Please enter a font file.
+
+
+
+
+ Autogroup:
+
+
+
+
+ Faces
+
+
+
+
+ Remove
+
+
+
+
+ Add
+
+
+
+
+ Facebinder elements
+
+
+
+
+ Draft
+
+
+
+
+
+ LibreDWG error
+
+
+
+
+
+ Converting:
+
+
+
+
+ Conversion successful
+
+
+
+
+ Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.
+
+
+
+
+
+ ODA File Converter not found
+
+
+
+
+
+ QCAD error
+
+
+
+
+
+
+ All Shapes must be coplanar
+
+
+
+
+ Selected Shapes must define a plane
+
+
+
+
+ The DXF import/export libraries needed by FreeCAD to handle
+the DXF format were not found on this system.
+Please either enable FreeCAD to download these libraries:
+ 1 - Load Draft workbench
+ 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads
+Or download these libraries manually, as explained on
+https://github.com/yorikvanhavre/Draft-dxf-importer
+To enabled FreeCAD to download these libraries, answer Yes.
+
+
+
+
+
+
+
+
+ Custom
+
+
+
+
+ Unable to convert input into a scale factor
+
+
+
+
+ Set custom scale
+
+
+
+
+ Set custom annotation scale in format x:x, x=x
+
+
+
+
+ Set the scale used by draft annotation tools
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ No active document. Aborting.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Wrong input: object not in document.
+
+
+
+
+ No graphical interface
+
+
+
+
+ Unable to insert new object into a scaled part
+
+
+
+
+ Symbol not implemented. Using a default symbol.
+
+
+
+
+ Visibility off; removed from list:
+
+
+
+
+ image is Null
+
+
+
+
+ filename does not exist on the system or in the resource file
+
+
+
+
+ unable to load texture
+
+
+
+
+ Does not have 'ViewObject.RootNode'.
+
+
+
+
+ Solids:
+
+
+
+
+ Faces:
+
+
+
+
+ Wires:
+
+
+
+
+ Edges:
+
+
+
+
+ Vertices:
+
+
+
+
+ Face
+
+
+
+
+ Wire
+
+
+
+
+
+ different types
+
+
+
+
+ Objects have different placements. Distance between the two base points:
+
+
+
+
+ has a different value
+
+
+
+
+ doesn't exist in one of the objects
+
+
+
+
+ %s shares a base with %d other objects. Please check if you want to modify this.
+
+
+
+
+ %s cannot be modified because its placement is readonly.
+
+
+
+
+ Wrong input: unknown document.
+
+
+
+
+ This function will be deprecated in
+
+
+
+
+
+ Please use
+
+
+
+
+ This function will be deprecated.
+
+
+
+
+ Pick a face, 3 vertices or a WP Proxy to define the drawing plane
+
+
+
+
+ Working plane aligned to global placement of
+
+
+
+
+ Dir
+
+
+
+
+
+ Please select exactly two objects, the base object and the path object, before calling this command.
+
+
+
+
+ Path array
+
+
+
+
+ Pick target point
+
+
+
+
+ Create Label
+
+
+
+
+
+ Pick endpoint of leader line
+
+
+
+
+
+ Pick text position
+
+
+
+
+
+
+
+ Pick first point
+
+
+
+
+ Create Line
+
+
+
+
+ Create Wire
+
+
+
+
+
+
+
+
+
+
+
+
+ Pick next point
+
+
+
+
+ Unable to create a Wire from selected objects
+
+
+
+
+ Convert to Wire
+
+
+
+
+ Select an object to join
+
+
+
+
+ Join lines
+
+
+
+
+ Selection:
+
+
+
+
+ Pick location point
+
+
+
+
+ Create Text
+
+
+
+
+ Select an object to convert.
+
+
+
+
+ Convert to Sketch
+
+
+
+
+ Convert to Draft
+
+
+
+
+ Convert Draft/Sketch
+
+
+
+
+ Select an object to move
+
+
+
+
+ Pick start point
+
+
+
+
+
+ Pick end point
+
+
+
+
+ Move
+
+
+
+
+
+ Some subelements could not be moved.
+
+
+
+
+
+ Pick center point
+
+
+
+
+
+
+
+
+
+ Pick radius
+
+
+
+
+
+
+
+ Start angle
+
+
+
+
+
+ Pick start angle
+
+
+
+
+
+
+
+ Aperture angle
+
+
+
+
+ Pick aperture
+
+
+
+
+ Create Circle (Part)
+
+
+
+
+ Create Circle
+
+
+
+
+ Create Arc (Part)
+
+
+
+
+ Create Arc
+
+
+
+
+ Pick aperture angle
+
+
+
+
+
+ Arc by 3 points
+
+
+
+
+ Toggle grid
+
+
+
+
+ Select an object to edit
+
+
+
+
+ Select a Draft object to edit
+
+
+
+
+ Edit node
+
+
+
+
+ No edit point found for selected object
+
+
+
+
+ Too many objects selected, max number set to:
+
+
+
+
+ : this object is not editable
+
+
+
+
+ Annotation style editor
+
+
+
+
+ Open styles file
+
+
+
+
+
+ JSON file (*.json)
+
+
+
+
+ Save styles file
+
+
+
+
+ The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead.
+
+
+
+
+
+ Select an object to project
+
+
+
+
+
+ Create Point
+
+
+
+
+ Select an object to rotate
+
+
+
+
+ Pick rotation center
+
+
+
+
+
+ Base angle
+
+
+
+
+
+ The base angle you wish to start the rotation from
+
+
+
+
+
+ Pick base angle
+
+
+
+
+
+ Rotation
+
+
+
+
+
+ The amount of rotation you wish to perform.
+The final angle will be the base angle plus this amount.
+
+
+
+
+
+ Pick rotation angle
+
+
+
+
+ Add to group
+
+
+
+
+ Ungroup
+
+
+
+
+ Add new group
+
+
+
+
+ Select group
+
+
+
+
+ No new selection. You must select non-empty groups or objects inside groups.
+
+
+
+
+ Autogroup
+
+
+
+
+ Add new Layer
+
+
+
+
+ Add to construction group
+
+
+
+
+ Add a new group with a given name
+
+
+
+
+ Add group
+
+
+
+
+ Group name
+
+
+
+
+ Group
+
+
+
+
+ Flip dimension
+
+
+
+
+ Sketch is too complex to edit: it is suggested to use sketcher default editor
+
+
+
+
+ Fillet radius
+
+
+
+
+ Radius of fillet
+
+
+
+
+ Enter radius.
+
+
+
+
+ Delete original objects:
+
+
+
+
+ Chamfer mode:
+
+
+
+
+ Two elements needed.
+
+
+
+
+ Test object
+
+
+
+
+ Test object removed
+
+
+
+
+ Fillet cannot be created
+
+
+
+
+ Create fillet
+
+
+
+
+ Create Polygon (Part)
+
+
+
+
+ Create Polygon
+
+
+
+
+ Click anywhere on a line to split it.
+
+
+
+
+ Split line
+
+
+
+
+ Select objects to trim or extend
+
+
+
+
+
+ Pick distance
+
+
+
+
+ Offset angle
+
+
+
+
+ Unable to trim these objects, only Draft wires and arcs are supported.
+
+
+
+
+ Unable to trim these objects, too many wires
+
+
+
+
+ These objects don't intersect.
+
+
+
+
+ Too many intersection points.
+
+
+
+
+ Spline has been closed
+
+
+
+
+
+
+ Last point has been removed
+
+
+
+
+ Create B-spline
+
+
+
+
+ Change Style
+
+
+
+
+
+ This object does not support possible coincident points, please try again.
+
+
+
+
+
+ Delete point
+
+
+
+
+
+ Add point
+
+
+
+
+ Open wire
+
+
+
+
+ Close wire
+
+
+
+
+ Reverse wire
+
+
+
+
+
+ Active object must have more than two points/nodes
+
+
+
+
+ Open spline
+
+
+
+
+ Close spline
+
+
+
+
+ Reverse spline
+
+
+
+
+ Move arc
+
+
+
+
+ Set first angle
+
+
+
+
+ Set last angle
+
+
+
+
+ Set radius
+
+
+
+
+ Invert arc
+
+
+
+
+ Make sharp
+
+
+
+
+ Make tangent
+
+
+
+
+ Make symmetric
+
+
+
+
+ Reverse curve
+
+
+
+
+ Open curve
+
+
+
+
+ Close curve
+
+
+
+
+ Selection is not a Knot
+
+
+
+
+ Endpoint of BezCurve can't be smoothed
+
+
+
+
+
+ Bézier curve has been closed
+
+
+
+
+
+ Create BezCurve
+
+
+
+
+
+ Click and drag to define next knot
+
+
+
+
+
+ Create Ellipse
+
+
+
+
+
+ Pick opposite point
+
+
+
+
+ Select faces from existing objects
+
+
+
+
+ Select an object to scale
+
+
+
+
+ Pick base point
+
+
+
+
+ Pick reference distance from base point
+
+
+
+
+
+
+ Scale
+
+
+
+
+ Some subelements could not be scaled.
+
+
+
+
+ Unable to scale object:
+
+
+
+
+ Unable to scale objects:
+
+
+
+
+ This object type cannot be scaled directly. Please use the clone method.
+
+
+
+
+ Pick new distance from base point
+
+
+
+
+
+
+ Layer
+
+
+
+
+ Please select exactly two objects, the base object and the point object, before calling this command.
+
+
+
+
+ Point array
+
+
+
+
+ No active Draft Toolbar.
+
+
+
+
+ Construction mode
+
+
+
+
+ Continue mode
+
+
+
+
+ Toggle display mode
+
+
+
+
+
+
+
+ Create Dimension
+
+
+
+
+ Create Dimension (radial)
+
+
+
+
+ Edge too short!
+
+
+
+
+ Edges don't intersect!
+
+
+
+
+ Select an object to stretch
+
+
+
+
+ Pick first point of selection rectangle
+
+
+
+
+ Pick opposite point of selection rectangle
+
+
+
+
+ Pick start point of displacement
+
+
+
+
+ Pick end point of displacement
+
+
+
+
+ Turning one Rectangle into a Wire
+
+
+
+
+ Stretch
+
+
+
+
+ Create Plane
+
+
+
+
+ Create Rectangle
+
+
+
+
+ Select an object to mirror
+
+
+
+
+ Pick start point of mirror line
+
+
+
+
+ Mirror
+
+
+
+
+
+ Pick end point of mirror line
+
+
+
+
+ Path twisted array
+
+
+
+
+ Select an object to clone
+
+
+
+
+ Change slope
+
+
+
+
+
+ Select an object to upgrade
+
+
+
+
+ Upgrade
+
+
+
+
+ Select an object to offset
+
+
+
+
+ Offset only works on one object at a time.
+
+
+
+
+ Cannot offset this object type
+
+
+
+
+ Offset of Bezier curves is currently not supported
+
+
+
+
+ Create 2D view
+
+
+
+
+
+ Pick ShapeString location point
+
+
+
+
+
+ Create ShapeString
+
+
+
+
+ Heal
+
+
+
+
+ Downgrade
+
+
+
+
+ Select an object to array
+
+
+
+
+ Array
+
+
+
+
+
+
+ Task panel:
+
+
+
+
+
+
+
+ Polar array
+
+
+
+
+
+
+ At least one element must be selected.
+
+
+
+
+
+
+ Selection is not suitable for array.
+
+
+
+
+
+
+
+
+
+ Object:
+
+
+
+
+ Number of elements must be at least 2.
+
+
+
+
+ The angle is above 360 degrees. It is set to this value to proceed.
+
+
+
+
+ The angle is below -360 degrees. It is set to this value to proceed.
+
+
+
+
+
+ Center reset:
+
+
+
+
+
+
+ Fuse:
+
+
+
+
+
+
+ Create Link array:
+
+
+
+
+ Number of elements:
+
+
+
+
+ Polar angle:
+
+
+
+
+
+ Center of rotation:
+
+
+
+
+
+
+ Aborted:
+
+
+
+
+
+
+
+
+ Orthogonal array
+
+
+
+
+ Number of elements must be at least 1.
+
+
+
+
+ Interval X reset:
+
+
+
+
+ Interval Y reset:
+
+
+
+
+ Interval Z reset:
+
+
+
+
+ Number of X elements:
+
+
+
+
+ Interval X:
+
+
+
+
+ Number of Y elements:
+
+
+
+
+ Interval Y:
+
+
+
+
+ Number of Z elements:
+
+
+
+
+ Interval Z:
+
+
+
+
+ ShapeString
+
+
+
+
+ Default
+
+
+
+
+
+
+
+
+ Circular array
+
+
+
+
+ Number of layers must be at least 2.
+
+
+
+
+ Radial distance is zero. Resulting array may not look correct.
+
+
+
+
+ Radial distance is negative. It is made positive to proceed.
+
+
+
+
+ Tangential distance cannot be zero.
+
+
+
+
+ Tangential distance is negative. It is made positive to proceed.
+
+
+
+
+ Radial distance:
+
+
+
+
+ Tangential distance:
+
+
+
+
+ Number of circular layers:
+
+
+
+
+ Symmetry parameter:
+
+
+
+
+ ShapeString: string has no wires
+
+
+
+
+
+ added view property 'ScaleMultiplier'
+
+
+
+
+
+ migrated 'DraftText' type to 'Text'
+
+
+
+
+ , path object doesn't have 'Edges'.
+
+
+
+
+
+
+ 'PathObj' property will be migrated to 'PathObject'
+
+
+
+
+ Length of tangent vector is zero. Copy not aligned.
+
+
+
+
+
+ Length of normal vector is zero. Using a default axis instead.
+
+
+
+
+
+ Tangent and normal vectors are parallel. Normal replaced by a default axis.
+
+
+
+
+ Cannot calculate normal vector. Using the default normal instead.
+
+
+
+
+ AlignMode {} is not implemented
+
+
+
+
+
+ added property 'ExtraPlacement'
+
+
+
+
+ No shape found
+
+
+
+
+ All Shapes must be planar
+
+
+
+
+
+
+
+ length:
+
+
+
+
+ Two elements are needed.
+
+
+
+
+ Radius is too large
+
+
+
+
+
+
+ Segment
+
+
+
+
+ Removed original objects.
+
+
+
+
+
+ Points:
+
+
+
+
+
+ Wrong input: must be list or tuple of three points exactly.
+
+
+
+
+ Placement:
+
+
+
+
+ Wrong input: incorrect type of placement.
+
+
+
+
+ Wrong input: incorrect type of points.
+
+
+
+
+ Cannot generate shape:
+
+
+
+
+ Radius:
+
+
+
+
+ Center:
+
+
+
+
+ Create primitive object
+
+
+
+
+
+ Final placement:
+
+
+
+
+ Face: True
+
+
+
+
+ Support:
+
+
+
+
+ Map mode:
+
+
+
+
+
+
+
+
+
+ Wrong input: must be a number.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Wrong input: must be a vector.
+
+
+
+
+
+ Wrong input: must be a list or tuple of strings, or a single string.
+
+
+
+
+ Wrong input: must be 'Original', 'Frenet', or 'Tangent'.
+
+
+
+
+ Internal orthogonal array
+
+
+
+
+ Wrong input: must be a number or vector.
+
+
+
+
+
+
+ Input: single value expanded to vector.
+
+
+
+
+
+
+ Wrong input: must be an integer number.
+
+
+
+
+
+
+ Input: number of elements must be at least 1. It is set to 1.
+
+
+
+
+ Orthogonal array 2D
+
+
+
+
+ Rectangular array
+
+
+
+
+ Rectangular array 2D
+
+
+
+
+
+
+ Wrong input: must be a placement, a vector, or a rotation.
+
+
+
+
+
+ Wrong input: object must not be a list.
+
+
+
+
+ Wrong input: subelement not in object.
+
+
+
+
+ Wrong input: label_type must be a string.
+
+
+
+
+ Wrong input: label_type must be one of the following:
+
+
+
+
+
+
+
+ Wrong input: must be a list of strings or a single string.
+
+
+
+
+
+ Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'.
+
+
+
+
+ Wrong input: must be a list of at least two vectors.
+
+
+
+
+ Direction is not 'Custom'; points won't be used.
+
+
+
+
+ Wrong input: must be a list of two elements. For example, [object, 'Edge1'].
+
+
+
+
+ Wrong input: object has the wrong type.
+
+
+
+
+ This function is deprecated. Do not use this function directly.
+
+
+
+
+ Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'.
+
+
+
+
+
+ Wrong input: object doesn't have a 'Shape' to measure.
+
+
+
+
+ Wrong input: object doesn't have at least one element in 'Vertexes' to use for measuring.
+
+
+
+
+
+ Wrong input: must be an integer.
+
+
+
+
+ i1: values below 1 are not allowed; will be set to 1.
+
+
+
+
+
+ Wrong input: vertex not in object.
+
+
+
+
+ i2: values below 1 are not allowed; will be set to the last vertex in the object.
+
+
+
+
+ Wrong input: object doesn't have at least one element in 'Edges' to use for measuring.
+
+
+
+
+ index: values below 1 are not allowed; will be set to 1.
+
+
+
+
+ Wrong input: index doesn't correspond to an edge in the object.
+
+
+
+
+ Wrong input: index doesn't correspond to a circular edge.
+
+
+
+
+
+ Wrong input: must be a string, 'radius' or 'diameter'.
+
+
+
+
+
+ Wrong input: must be a list with two angles.
+
+
+
+
+ Wrong input: must be a number or quantity.
+
+
+
+
+ Layers
+
+
+
+
+ Wrong input: it must be a string.
+
+
+
+
+
+
+
+ Wrong input: must be a tuple of three floats 0.0 to 1.0.
+
+
+
+
+
+ Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'.
+
+
+
+
+ Wrong input: must be a number between 0 and 100.
+
+
+
+
+ Please load the Draft Workbench to enable editing this object
+
+
+
+
+ Activate this layer
+
+
+
+
+ Select layer contents
+
+
+
+
+
+ Merge layer duplicates
+
+
+
+
+
+ Add new layer
+
+
+
+
+ Relabeling layer:
+
+
+
+
+ Merging layer:
+
+
+
+
+
+ Flatten
+
+
+
+
+
+ Upgrade: Unknown force method:
+
+
+
+
+ Found 1 block: exploding it
+
+
+
+
+ Found 1 multi-solids compound: exploding it
+
+
+
+
+ Found 1 parametric object: breaking its dependencies
+
+
+
+
+ Found 2 objects: subtracting them
+
+
+
+
+ Found several faces: splitting them
+
+
+
+
+ Found several objects: subtracting them from the first one
+
+
+
+
+ Found 1 face: extracting its wires
+
+
+
+
+ Found only wires: extracting their edges
+
+
+
+
+ No more downgrade possible
+
+
+
+
+ No object given
+
+
+
+
+ The two points are coincident
+
+
+
+
+ mirrored
+
+
+
+
+ Object must be a closed shape
+
+
+
+
+ No solid object created
+
+
+
+
+ Faces must be coplanar to be refined
+
+
+
+
+ Found groups: closing each open object inside
+
+
+
+
+ Found meshes: turning into Part shapes
+
+
+
+
+ Found 1 solidifiable object: solidifying it
+
+
+
+
+ Found 2 objects: fusing them
+
+
+
+
+ Found object with several coplanar faces: refine them
+
+
+
+
+ Found 1 non-parametric objects: draftifying it
+
+
+
+
+ Found 1 closed sketch object: creating a face from it
+
+
+
+
+ Found closed wires: creating faces
+
+
+
+
+ Found several wires or edges: wiring them
+
+
+
+
+
+ Found several non-treatable objects: creating compound
+
+
+
+
+ trying: closing it
+
+
+
+
+ Found 1 open wire: closing it
+
+
+
+
+ Found 1 object: draftifying it
+
+
+
+
+ Found points: creating compound
+
+
+
+
+ Unable to upgrade these objects.
+
+
+
+
+ Workbench
+
+
+ Draft creation tools
+
+
+
+
+ Draft annotation tools
+
+
+
+
+ Draft modification tools
+
+
+
+
+ Draft utility tools
+
+
+
+
+
+ Draft snap
+
+
+
+
+ &Drafting
+
+
+
+
+ &Annotation
+
+
+
+
+ &Modification
+
+
+
+
+ &Utilities
+
+
+
+
+ Arc tools
+
+
+
+
+ Bézier tools
+
+
+
+
+ Array tools
+
+
+
+
+ Draft
+
+
+
+
+
+
+ Draft
+
+
+
+
+
+
+
+ Import-Export
+
+
+
+
+ Download of dxf libraries failed.
+Please install the dxf Library addon manually
+from menu Tools -> Addon Manager
+
+
+
+
+ You must choose a base object before using this command
+
+
+
+
+ Delete original objects
+
+
+
+
+ Create chamfer
+
+
+
+
+ Save style
+
+
+
+
+ Name of this new style:
+
+
+
+
+ Warning
+
+
+
+
+ Name exists. Overwrite?
+
+
+
+
+ Error: json module not found. Unable to save style
+
+
+
+
+ Clone
+
+
+
+
+
+ Slope
+
+
+
+
+ Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction
+
+
+
+
+
+
+ True
+
+
+
+
+
+
+ False
+
+
+
+
+ Scale
+
+
+
+
+ X factor
+
+
+
+
+ Y factor
+
+
+
+
+ Z factor
+
+
+
+
+ Uniform scaling
+
+
+
+
+ Working plane orientation
+
+
+
+
+ Copy
+
+
+
+
+ Modify subelements
+
+
+
+
+ Pick from/to points
+
+
+
+
+ Create a clone
+
+
+
+
+ Point object doesn't have a discrete point, it cannot be used for an array.
+
+
+
+
+ _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated.
+
+
+
+
+ Writing camera position
+
+
+
+
+ Writing objects shown/hidden state
+
+
+
+
+ importOCA
+
+
+ OCA error: couldn't determine character encoding
+
+
+
+
+ OCA: found no data to export
+
+
+
+
+ successfully exported
+
+
+
+
+ ImportAirfoilDAT
+
+
+ Did not find enough coordinates
+
+
+
+
+ ImportSVG
+
+
+ Unknown SVG export style, switching to Translated
+
+
+
+
+ The export list contains no object with a valid bounding box
+
+
+
+
+ Draft_SelectPlane
+
+
+ Select Plane
+
+
+
+
+ Select the face of solid body to create a working plane on which to sketch Draft objects.
+You may also select a three vertices or a Working Plane Proxy.
+
+
+
+
+ Draft_PathArray
+
+
+ Path array
+
+
+
+
+ Creates copies of the selected object along a selected path.
+First select the object, and then select the path.
+The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
+
+
+
+
+ Draft_PathLinkArray
+
+
+ Path Link array
+
+
+
+
+ Like the PathArray tool, but creates a 'Link array' instead.
+A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
+
+
+
+
+ Draft_Label
+
+
+ Label
+
+
+
+
+ Creates a label, optionally attached to a selected object or subelement.
+
+First select a vertex, an edge, or a face of an object, then call this command,
+and then set the position of the leader line and the textual label.
+The label will be able to display information about this object, and about the selected subelement,
+if any.
+
+If many objects or many subelements are selected, only the first one in each case
+will be used to provide information to the label.
+
+
+
+
+ Draft_Line
+
+
+ Line
+
+
+
+
+ Creates a 2-point line. CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_Wire
+
+
+ Polyline
+
+
+
+
+ Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_Hatch
+
+
+ Hatch
+
+
+
+
+ Creates hatches on the faces of a selected object
+
+
+
+
+ Draft_Join
+
+
+ Join
+
+
+
+
+ Joins the selected lines or polylines into a single object.
+The lines must share a common point at the start or at the end for the operation to succeed.
+
+
+
+
+ Draft_Text
+
+
+ Text
+
+
+
+
+ Creates a multi-line annotation. CTRL to snap.
+
+
+
+
+ Draft_Draft2Sketch
+
+
+ Draft to Sketch
+
+
+
+
+ Convert bidirectionally between Draft objects and Sketches.
+Many Draft objects will be converted into a single non-constrained Sketch.
+However, a single sketch with disconnected traces will be converted into several individual Draft objects.
+
+
+
+
+ Draft_Snap_Lock
+
+
+ Snap Lock
+
+
+
+
+ Enables or disables snapping globally.
+
+
+
+
+ Draft_Snap_Midpoint
+
+
+ Snap Midpoint
+
+
+
+
+ Snaps to the midpoint of edges.
+
+
+
+
+ Draft_Snap_Perpendicular
+
+
+ Snap Perpendicular
+
+
+
+
+ Snaps to the perpendicular points on faces and edges.
+
+
+
+
+ Draft_Snap_Grid
+
+
+ Snap Grid
+
+
+
+
+ Snaps to the intersections of grid lines.
+
+
+
+
+ Draft_Snap_Intersection
+
+
+ Snap Intersection
+
+
+
+
+ Snaps to the intersection of two edges.
+
+
+
+
+ Draft_Snap_Parallel
+
+
+ Snap Parallel
+
+
+
+
+ Snaps to an imaginary line parallel to straight edges.
+
+
+
+
+ Draft_Snap_Endpoint
+
+
+ Snap Endpoint
+
+
+
+
+ Snaps to the endpoints of edges.
+
+
+
+
+ Draft_Snap_Angle
+
+
+ Snap Angle
+
+
+
+
+ Snaps to the special cardinal points on circular edges, at multiples of 30° and 45°.
+
+
+
+
+ Draft_Snap_Center
+
+
+ Snap Center
+
+
+
+
+ Snaps to the center point of faces and circular edges, and to the Placement point of Working Plane Proxies and Building Parts.
+
+
+
+
+ Draft_Snap_Extension
+
+
+ Snap Extension
+
+
+
+
+ Snaps to an imaginary line that extends beyond the endpoints of straight edges.
+
+
+
+
+ Draft_Snap_Near
+
+
+ Snap Near
+
+
+
+
+ Snaps to the nearest point on faces and edges.
+
+
+
+
+ Draft_Snap_Ortho
+
+
+ Snap Ortho
+
+
+
+
+ Snaps to imaginary lines that cross the previous point at multiples of 45°.
+
+
+
+
+ Draft_Snap_Special
+
+
+ Snap Special
+
+
+
+
+ Snaps to special points defined by the object.
+
+
+
+
+ Draft_Snap_Dimensions
+
+
+ Snap Dimensions
+
+
+
+
+ Shows temporary X and Y dimensions.
+
+
+
+
+ Draft_Snap_WorkingPlane
+
+
+ Snap Working Plane
+
+
+
+
+ Projects snap points onto the current working plane.
+
+
+
+
+ Draft_ShowSnapBar
+
+
+ Show snap toolbar
+
+
+
+
+ Shows the snap toolbar if it is hidden.
+
+
+
+
+ Draft_Move
+
+
+ Move
+
+
+
+
+ Moves the selected objects from one base point to another point.
+If the "copy" option is active, it will create displaced copies.
+CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_Arc
+
+
+ Arc
+
+
+
+
+ Creates a circular arc by a center point and a radius.
+CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_Arc_3Points
+
+
+ Arc by 3 points
+
+
+
+
+ Creates a circular arc by picking 3 points.
+CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_ArcTools
+
+
+ Arc tools
+
+
+
+
+ Create various types of circular arcs.
+
+
+
+
+ Draft_ToggleGrid
+
+
+ Toggle grid
+
+
+
+
+ Toggles the Draft grid on and off.
+
+
+
+
+ Draft_SubelementHighlight
+
+
+ Subelement highlight
+
+
+
+
+ Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.
+
+
+
+
+ Draft_Edit
+
+
+ Edit
+
+
+
+
+ Edits the active object.
+Press E or ALT+LeftClick to display context menu
+on supported nodes and on supported objects.
+
+
+
+
+ Draft_AddPoint
+
+
+ Add point
+
+
+
+
+ Adds a point to an existing Wire or B-spline.
+
+
+
+
+ Draft_DelPoint
+
+
+ Remove point
+
+
+
+
+ Removes a point from an existing Wire or B-spline.
+
+
+
+
+ Draft_CircularArray
+
+
+ Circular array
+
+
+
+
+ Creates copies of the selected object, and places the copies in a radial pattern
+creating various circular layers.
+
+The array can be turned into an orthogonal or a polar array by changing its type.
+
+
+
+
+ Draft_AnnotationStyleEditor
+
+
+ Annotation styles...
+
+
+
+
+ Manage or create annotation styles
+
+
+
+
+ Draft_Drawing
+
+
+ Drawing
+
+
+
+
+ Creates a 2D projection on a Drawing Workbench page from the selected objects.
+This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17.
+Use TechDraw Workbench instead for generating technical drawings.
+
+
+
+
+ Draft_Point
+
+
+ Point
+
+
+
+
+ Creates a point object. Click anywhere on the 3D view.
+
+
+
+
+ Draft_Rotate
+
+
+ Rotate
+
+
+
+
+ Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle.
+If the "copy" option is active, it will create rotated copies.
+CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+
+
+
+ Draft_AddToGroup
+
+
+ Move to group...
+
+
+
+
+ Moves the selected objects to an existing group, or removes them from any group.
+Create a group first to use this tool.
+
+
+
+
+ Draft_SelectGroup
+
+
+ Select group
+
+
+
+
+ Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected.
+
+
+
+
+ Draft_AutoGroup
+
+
+ Autogroup
+
+
+
+
+ Select a group to add all Draft and Arch objects to.
+
+
+
+
+ Draft_AddConstruction
+
+
+ Add to Construction group
+
+
+
+
+ Adds the selected objects to the construction group,
+and changes their appearance to the construction style.
+It creates a construction group if it doesn't exist.
+
+
+
+
+ Draft_AddNamedGroup
+
+
+ Add a new named group
+
+
+
+
+ Add a new group with a given name.
+
+
+
+
+ Draft_WorkingPlaneProxy
+
+
+ Create working plane proxy
+
+
+
+
+ Creates a proxy object from the current working plane.
+Once the object is created double click it in the tree view to restore the camera position and objects' visibilities.
+Then you can use it to save a different camera position and objects' states any time you need.
+
+
+
+
+ Draft_WireToBSpline
+
+
+ Wire to B-spline
+
+
+
+
+ Converts a selected polyline to a B-spline, or a B-spline to a polyline.
+
+
+
+
+ Draft_FlipDimension
+
+
+ Flip dimension
+
+
+
+
+ Flip the normal direction of the selected dimensions (linear, radial, angular).
+If other objects are selected they are ignored.
+
+
+
+
+ Draft_Fillet
+
+
+ Fillet
+
+
+
+
+ Creates a fillet between two selected wires or edges.
+
+
+
+
+ Draft_SetStyle
+
+
+ Set style
+
+
+
+
+ Sets default styles
+
+
+
+
+ Draft_Polygon
+
+
+ Polygon
+
+
+
+
+ Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
+CTRL to snap, SHIFT to constrain
+
+
+
+
+ Draft_Split
+
+
+ Split
+
+
+
+
+ Splits the selected line or polyline into two independent lines
+or polylines by clicking anywhere along the original object.
+It works best when choosing a point on a straight segment and not a corner vertex.
+
+
+
+
+ Draft_Trimex
+
+
+ Trimex
+
+
+
+
+ Trims or extends the selected object, or extrudes single faces.
+CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.
+
+
+
+
+ Draft_BSpline
+
+
+ B-spline
+
+
+
+
+ Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_ApplyStyle
+
+
+ Apply current style
+
+
+
+
+ Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups.
+
+
+
+
+ Draft_BezCurve
+
+
+ Bézier curve
+
+
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+
+
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
+
+
+
+ Draft_BezierTools
+
+
+ Bézier tools
+
+
+
+
+ Create various types of Bézier curves.
+
+
+
+
+ Draft_Circle
+
+
+ Circle
+
+
+
+
+ Creates a circle (full circular arc).
+CTRL to snap, ALT to select tangent objects.
+
+
+
+
+ Draft_Ellipse
+
+
+ Ellipse
+
+
+
+
+ Creates an ellipse. CTRL to snap.
+
+
+
+
+ Draft_Facebinder
+
+
+ Facebinder
+
+
+
+
+ Creates a facebinder object from selected faces.
+
+
+
+
+ Draft_OrthoArray
+
+
+ Array
+
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
+
+
+ Draft_Scale
+
+
+ Scale
+
+
+
+
+ Scales the selected objects from a base point.
+CTRL to snap, SHIFT to constrain, ALT to copy.
+
+
+
+
+ Draft_Layer
+
+
+ Layer
+
+
+
+
+ Adds a layer to the document.
+Objects added to this layer can share the same visual properties such as line color, line width, and shape color.
+
+
+
+
+ Draft_PointArray
+
+
+ Point array
+
+
+
+
+ Creates copies of the selected base object at the points of a point object.
+First select the base object, and then select the point object.
+
+
+
+
+ Draft_PointLinkArray
+
+
+ PointLinkArray
+
+
+
+
+ Like the PointArray tool, but creates a 'Point link array' instead.
+A 'Point link array' is more efficient when handling many copies.
+
+
+
+
+ Draft_ArrayTools
+
+
+ Array tools
+
+
+
+
+ Create various types of arrays, including rectangular, polar, circular, path, and point
+
+
+
+
+ Draft_ToggleConstructionMode
+
+
+ Toggle construction mode
+
+
+
+
+ Toggles the Construction mode.
+When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.
+
+
+
+
+ Draft_ToggleContinueMode
+
+
+ Toggle continue mode
+
+
+
+
+ Toggles the Continue mode.
+When this is active, any drawing tool that is terminated will automatically start again.
+This can be used to draw several objects one after the other in succession.
+
+
+
+
+ Draft_ToggleDisplayMode
+
+
+ Toggle normal/wireframe display
+
+
+
+
+ Switches the display mode of selected objects from flatlines to wireframe and back.
+This is helpful to quickly visualize objects that are hidden by other objects.
+This is intended to be used with closed shapes and solids, and doesn't affect open wires.
+
+
+
+
+ Draft_Dimension
+
+
+ Dimension
+
+
+
+
+ Creates a dimension.
+
+- Pick three points to create a simple linear dimension.
+- Select a straight line to create a linear dimension linked to that line.
+- Select an arc or circle to create a radius or diameter dimension linked to that arc.
+- Select two straight lines to create an angular dimension between them.
+CTRL to snap, SHIFT to constrain, ALT to select an edge or arc.
+
+You may select a single line or single circular arc before launching this command
+to create the corresponding linked dimension.
+You may also select an 'App::MeasureDistance' object before launching this command
+to turn it into a 'Draft Dimension' object.
+
+
+
+
+ Draft_Stretch
+
+
+ Stretch
+
+
+
+
+ Stretches the selected objects.
+Select an object, then draw a rectangle to pick the vertices that will be stretched,
+then draw a line to specify the distance and direction of stretching.
+
+
+
+
+ Draft_Rectangle
+
+
+ Rectangle
+
+
+
+
+ Creates a 2-point rectangle. CTRL to snap.
+
+
+
+
+ Draft_Mirror
+
+
+ Mirror
+
+
+
+
+ Mirrors the selected objects along a line defined by two points.
+
+
+
+
+ Draft_PathTwistedArray
+
+
+ Path twisted array
+
+
+
+
+ Creates copies of the selected object along a selected path, and twists the copies.
+First select the object, and then select the path.
+The path can be a polyline, B-spline, Bezier curve, or even edges from other objects.
+
+
+
+
+ Draft_PathTwistedLinkArray
+
+
+ Path twisted Link array
+
+
+
+
+ Like the PathTwistedArray tool, but creates a 'Link array' instead.
+A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
+
+
+
+
+ Draft_Clone
+
+
+ Clone
+
+
+
+
+ Creates a clone of the selected objects.
+The resulting clone can be scaled in each of its three directions.
+
+
+
+
+ Draft_PolarArray
+
+
+ Polar array
+
+
+
+
+ Creates copies of the selected object, and places the copies in a polar pattern
+defined by a center of rotation and its angle.
+
+The array can be turned into an orthogonal or a circular array by changing its type.
+
+
+
+
+ Draft_Slope
+
+
+ Set slope
+
+
+
+
+ Sets the slope of the selected line by changing the value of the Z value of one of its points.
+If a polyline is selected, it will apply the slope transformation to each of its segments.
+
+The slope will always change the Z value, therefore this command only works well for
+straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored.
+
+
+
+
+ Draft_Upgrade
+
+
+ Upgrade
+
+
+
+
+ Upgrades the selected objects into more complex shapes.
+The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
+For example, it can join the selected objects into one, convert simple edges into parametric polylines,
+convert closed edges into filled faces and parametric polygons, and merge faces into a single face.
+
+
+
+
+ Draft_Offset
+
+
+ Offset
+
+
+
+
+ Offsets of the selected object.
+It can also create an offset copy of the original object.
+CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+
+
+
+ Draft_Shape2DView
+
+
+ Shape 2D view
+
+
+
+
+ Creates a 2D projection of the selected objects on the XY plane.
+The initial projection direction is the negative of the current active view direction.
+You can select individual faces to project, or the entire solid, and also include hidden lines.
+These projections can be used to create technical drawings with the TechDraw Workbench.
+
+
+
+
+ Draft_ShapeString
+
+
+ Shape from text
+
+
+
+
+ Creates a shape from a text string by choosing a specific font and a placement.
+The closed shapes can be used for extrusions and boolean operations.
+
+
+
+
+ Draft_Heal
+
+
+ Heal
+
+
+
+
+ Heal faulty Draft objects saved with an earlier version of the program.
+If an object is selected it will try to heal that object in particular,
+otherwise it will try to heal all objects in the active document.
+
+
+
+
+ Draft_Downgrade
+
+
+ Downgrade
+
+
+
+
+ Downgrades the selected objects into simpler shapes.
+The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row.
+For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces.
+
+
+
+
+ Draft_Array
+
+
+ Array
+
+
+
+
+ Creates an array from a selected object.
+By default, it is a 2x2 orthogonal array.
+Once the array is created its type can be changed
+to polar or circular, and its properties can be modified.
+
+
+
+
+ Draft_LinkArray
+
+
+ LinkArray
+
+
+
+
+ Like the Array tool, but creates a 'Link array' instead.
+A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used.
+
+
+
+
+ App::Property
+
+
+ The placement of the base point of the first line
+
+
+
+
+ The text displayed by this object.
+It is a list of strings; each element in the list will be displayed in its own line.
+
+
+
+
+ Text string
+
+
+
+
+ Font file name
+
+
+
+
+ Height of text
+
+
+
+
+ Inter-character spacing
+
+
+
+
+ Fill letters with faces
+
+
+
+
+ The base object used by this object
+
+
+
+
+ The PAT file used by this object
+
+
+
+
+ The pattern name used by this object
+
+
+
+
+ The pattern scale used by this object
+
+
+
+
+ The pattern rotation used by this object
+
+
+
+
+ If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
+
+
+
+
+ The objects included in this clone
+
+
+
+
+ The scale factor of this clone
+
+
+
+
+ If Clones includes several objects,
+set True for fusion or False for compound
+
+
+
+
+ Start angle of the arc
+
+
+
+
+ End angle of the arc (for a full circle,
+ give it same value as First Angle)
+
+
+
+
+ Radius of the circle
+
+
+
+
+
+
+
+ Create a face
+
+
+
+
+
+
+
+
+
+ The area of this object
+
+
+
+
+ The objects that are part of this layer
+
+
+
+
+ Number of faces
+
+
+
+
+ Radius of the control circle
+
+
+
+
+ How the polygon must be drawn from the control circle
+
+
+
+
+
+
+ Radius to use to fillet the corners
+
+
+
+
+
+
+ Size of the chamfer to give to the corners
+
+
+
+
+ The base object that will be duplicated.
+
+
+
+
+
+ The object along which the copies will be distributed. It must contain 'Edges'.
+
+
+
+
+ Number of copies to create.
+
+
+
+
+ Rotation factor of the twisted array.
+
+
+
+
+
+
+
+ Show the individual array elements (only for Link arrays)
+
+
+
+
+ The position of the tip of the leader line.
+This point can be decorated with an arrow or another symbol.
+
+
+
+
+ Object, and optionally subelement, whose properties will be displayed
+as 'Text', depending on 'Label Type'.
+
+'Target' won't be used if 'Label Type' is set to 'Custom'.
+
+
+
+
+ The list of points defining the leader line; normally a list of three points.
+
+The first point should be the position of the text, that is, the 'Placement',
+and the last point should be the tip of the line, that is, the 'Target Point'.
+The middle point is calculated automatically depending on the chosen
+'Straight Direction' and the 'Straight Distance' value and sign.
+
+If 'Straight Direction' is set to 'Custom', the 'Points' property
+can be set as a list of arbitrary points.
+
+
+
+
+ The direction of the straight segment of the leader line.
+
+If 'Custom' is chosen, the points of the leader can be specified by
+assigning a custom list to the 'Points' attribute.
+
+
+
+
+ The length of the straight segment of the leader line.
+
+This is an oriented distance; if it is negative, the line will be drawn
+to the left or below the 'Text', otherwise to the right or above it,
+depending on the value of 'Straight Direction'.
+
+
+
+
+ The placement of the 'Text' element in 3D space
+
+
+
+
+ The text to display when 'Label Type' is set to 'Custom'
+
+
+
+
+ The text displayed by this label.
+
+This property is read-only, as the final text depends on 'Label Type',
+and the object defined in 'Target'.
+The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.
+
+
+
+
+ The type of information displayed by this label.
+
+If 'Custom' is chosen, the contents of 'Custom Text' will be used.
+For other types, the string will be calculated automatically from the object defined in 'Target'.
+'Tag' and 'Material' only work for objects that have these properties, like Arch objects.
+
+For 'Position', 'Length', and 'Area' these properties will be extracted from the main object in 'Target',
+or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is specified.
+
+
+
+
+
+ General scaling factor that affects the annotation consistently
+because it scales the text, and the line decorations, if any,
+in the same proportion.
+
+
+
+
+
+ Annotation style to apply to this object.
+When using a saved style some of the view properties will become read-only;
+they will only be editable by changing the style through the 'Annotation style editor' tool.
+
+
+
+
+
+ The base object that will be duplicated
+
+
+
+
+ List of connected edges in the 'Path Object'.
+If these are present, the copies will be created along these subelements only.
+Leave this property empty to create copies along the entire 'Path Object'.
+
+
+
+
+ Number of copies to create
+
+
+
+
+ Additional translation that will be applied to each copy.
+This is useful to adjust for the difference between shape centre and shape reference point.
+
+
+
+
+ Alignment vector for 'Tangent' mode
+
+
+
+
+ Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode
+
+
+
+
+ Direction of the local Z axis when 'Force Vertical' is true
+
+
+
+
+ Method to orient the copies along the path.
+- Original: X is curve tangent, Y is normal, and Z is the cross product.
+- Frenet: aligns the object following the local coordinate system along the path.
+- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'.
+
+To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true.
+
+
+
+
+ Orient the copies along the path depending on the 'Align Mode'.
+Otherwise the copies will have the same orientation as the original Base object.
+
+
+
+
+ The type of array to create.
+- Ortho: places the copies in the direction of the global X, Y, Z axes.
+- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
+- Circular: places the copies in concentric circular layers around the base object.
+
+
+
+
+ Specifies if the copies should be fused together if they touch each other (slower)
+
+
+
+
+ Number of copies in X direction
+
+
+
+
+ Number of copies in Y direction
+
+
+
+
+ Number of copies in Z direction
+
+
+
+
+ Distance and orientation of intervals in X direction
+
+
+
+
+ Distance and orientation of intervals in Y direction
+
+
+
+
+ Distance and orientation of intervals in Z direction
+
+
+
+
+ The axis direction around which the elements in a polar or a circular array will be created
+
+
+
+
+ Center point for polar and circular arrays.
+The 'Axis' passes through this point.
+
+
+
+
+ The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line.
+Its placement, position and rotation, will be used when creating polar and circular arrays.
+Leave this property empty to be able to set 'Axis' and 'Center' manually.
+
+
+
+
+ Number of copies in the polar direction
+
+
+
+
+ Distance and orientation of intervals in 'Axis' direction
+
+
+
+
+ Angle to cover with copies
+
+
+
+
+ Distance between circular layers
+
+
+
+
+ Distance between copies in the same circular layer
+
+
+
+
+ Number of circular layers. The 'Base' object counts as one layer.
+
+
+
+
+ A parameter that determines how many symmetry planes the circular array will have.
+
+
+
+
+ Total number of elements in the array.
+This property is read-only, as the number depends on the parameters of the array.
+
+
+
+
+ Base object that will be duplicated
+
+
+
+
+ Object containing points used to distribute the copies.
+
+
+
+
+ Number of copies in the array.
+This property is read-only, as the number depends on the points in 'Point Object'.
+
+
+
+
+
+ Additional placement, shift and rotation, that will be applied to each copy
+
+
+
+
+ The base object this 2D view must represent
+
+
+
+
+ The projection vector of this object
+
+
+
+
+ The way the viewed object must be projected
+
+
+
+
+ The indices of the faces to be projected in Individual Faces mode
+
+
+
+
+ Show hidden lines
+
+
+
+
+ Fuse wall and structure objects of same type and material
+
+
+
+
+ Tessellate Ellipses and B-splines into line segments
+
+
+
+
+ For Cutlines and Cutfaces modes,
+ this leaves the faces at the cut location
+
+
+
+
+ Length of line segments if tessellating Ellipses or B-splines
+ into line segments
+
+
+
+
+ If this is True, this object will include only visible objects
+
+
+
+
+ A list of exclusion points. Any edge touching any of those points will not be drawn.
+
+
+
+
+ A list of exclusion object names. Any object viewed that matches a name from the list will not be drawn.
+
+
+
+
+ If this is True, only solid geometry is handled. This overrides the base object's Only Solids property
+
+
+
+
+ If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property
+
+
+
+
+ This object will be recomputed only if this is True.
+
+
+
+
+ The points of the Bezier curve
+
+
+
+
+ The degree of the Bezier function
+
+
+
+
+ Continuity
+
+
+
+
+ If the Bezier curve should be closed or not
+
+
+
+
+ Create a face if this curve is closed
+
+
+
+
+ The length of this object
+
+
+
+
+ The placement of this object
+
+
+
+
+ X Location
+
+
+
+
+ Y Location
+
+
+
+
+ Z Location
+
+
+
+
+ Start angle of the elliptical arc
+
+
+
+
+ End angle of the elliptical arc
+
+ (for a full circle, give it same value as First Angle)
+
+
+
+
+ Minor radius of the ellipse
+
+
+
+
+ Major radius of the ellipse
+
+
+
+
+ Area of this object
+
+
+
+
+ The start point of this line.
+
+
+
+
+ The end point of this line.
+
+
+
+
+ The length of this line.
+
+
+
+
+ Radius to use to fillet the corner.
+
+
+
+
+ The normal direction of the text of the dimension
+
+
+
+
+ The object measured by this dimension object
+
+
+
+
+ The object, and specific subelements of it,
+that this dimension object is measuring.
+
+There are various possibilities:
+- An object, and one of its edges.
+- An object, and two of its vertices.
+- An arc object, and its edge.
+
+
+
+
+ A point through which the dimension line, or an extrapolation of it, will pass.
+
+- For linear dimensions, this property controls how close the dimension line
+is to the measured object.
+- For radial dimensions, this controls the direction of the dimension line
+that displays the measured radius or diameter.
+- For angular dimensions, this controls the radius of the dimension arc
+that displays the measured angle.
+
+
+
+
+ Starting point of the dimension line.
+
+If it is a radius dimension it will be the center of the arc.
+If it is a diameter dimension it will be a point that lies on the arc.
+
+
+
+
+ Ending point of the dimension line.
+
+If it is a radius or diameter dimension
+it will be a point that lies on the arc.
+
+
+
+
+ The direction of the dimension line.
+If this remains '(0,0,0)', the direction will be calculated automatically.
+
+
+
+
+ The value of the measurement.
+
+This property is read-only because the value is calculated
+from the 'Start' and 'End' properties.
+
+If the 'Linked Geometry' is an arc or circle, this 'Distance'
+is the radius or diameter, depending on the 'Diameter' property.
+
+
+
+
+ When measuring circular arcs, it determines whether to display
+the radius or the diameter value
+
+
+
+
+ Starting angle of the dimension line (circular arc).
+The arc is drawn counter-clockwise.
+
+
+
+
+ Ending angle of the dimension line (circular arc).
+The arc is drawn counter-clockwise.
+
+
+
+
+ The center point of the dimension line, which is a circular arc.
+
+This is normally the point where two line segments, or their extensions
+intersect, resulting in the measured 'Angle' between them.
+
+
+
+
+ The value of the measurement.
+
+This property is read-only because the value is calculated from
+the 'First Angle' and 'Last Angle' properties.
+
+
+
+
+ Length of the rectangle
+
+
+
+
+ Height of the rectangle
+
+
+
+
+ Horizontal subdivisions of this rectangle
+
+
+
+
+ Vertical subdivisions of this rectangle
+
+
+
+
+ Linked faces
+
+
+
+
+ Specifies if splitter lines must be removed
+
+
+
+
+ An optional extrusion value to be applied to all faces
+
+
+
+
+ An optional offset value to be applied to all faces
+
+
+
+
+ This specifies if the shapes sew
+
+
+
+
+ The area of the faces of this Facebinder
+
+
+
+
+ The linked object
+
+
+
+
+ Projection direction
+
+
+
+
+ The width of the lines inside this object
+
+
+
+
+ The size of the texts inside this object
+
+
+
+
+ The spacing between lines of text
+
+
+
+
+ The color of the projected objects
+
+
+
+
+ Shape Fill Style
+
+
+
+
+ Line Style
+
+
+
+
+ If checked, source objects are displayed regardless of being visible in the 3D model
+
+
+
+
+ The components of this block
+
+
+
+
+ The vertices of the wire
+
+
+
+
+ If the wire is closed or not
+
+
+
+
+ The base object is the wire, it's formed from 2 objects
+
+
+
+
+ The tool object is the wire, it's formed from 2 objects
+
+
+
+
+ The start point of this line
+
+
+
+
+ The end point of this line
+
+
+
+
+ The length of this line
+
+
+
+
+ Create a face if this object is closed
+
+
+
+
+ The number of subdivisions of each edge
+
+
+
+
+ The points of the B-spline
+
+
+
+
+ If the B-spline is closed or not
+
+
+
+
+ Create a face if this spline is closed
+
+
+
+
+ Parameterization factor
+
+
+
+
+ Force sync pattern placements even when array elements are expanded
+
+
+
+
+ Show the individual array elements
+
+
+
+
+
+ The size of the text
+
+
+
+
+
+ The font of the text
+
+
+
+
+
+
+ The vertical alignment of the text
+
+
+
+
+
+ Text color
+
+
+
+
+ The maximum number of characters on each line of the text box
+
+
+
+
+
+ Line spacing (relative to font size)
+
+
+
+
+ The size of the arrow
+
+
+
+
+ The type of arrow of this label
+
+
+
+
+ The type of frame around the text of this object
+
+
+
+
+ Display a leader line or not
+
+
+
+
+
+ Line width
+
+
+
+
+
+ Line color
+
+
+
+
+ Defines an SVG pattern.
+
+
+
+
+ Defines the size of the SVG pattern.
+
+
+
+
+ If it is true, the objects contained within this layer will adopt the line color of the layer
+
+
+
+
+ If it is true, the objects contained within this layer will adopt the shape color of the layer
+
+
+
+
+ If it is true, the print color will be used when objects in this layer are placed on a TechDraw page
+
+
+
+
+ The line color of the objects contained within this layer
+
+
+
+
+ The shape color of the objects contained within this layer
+
+
+
+
+ The line width of the objects contained within this layer
+
+
+
+
+ The draw style of the objects contained within this layer
+
+
+
+
+ The transparency of the objects contained within this layer
+
+
+
+
+ The line color of the objects contained within this layer, when used on a TechDraw page
+
+
+
+
+ Font name
+
+
+
+
+ Font size
+
+
+
+
+ Spacing between text and dimension line
+
+
+
+
+ Rotate the dimension text 180 degrees
+
+
+
+
+ Text Position.
+Leave '(0,0,0)' for automatic position
+
+
+
+
+ Text override.
+Write '$dim' so that it is replaced by the dimension length.
+
+
+
+
+ The number of decimals to show
+
+
+
+
+ Show the unit suffix
+
+
+
+
+ A unit to express the measurement.
+Leave blank for system default.
+Use 'arch' to force US arch notation
+
+
+
+
+ Arrow size
+
+
+
+
+ Arrow type
+
+
+
+
+ Rotate the dimension arrows 180 degrees
+
+
+
+
+ The distance the dimension line is extended
+past the extension lines
+
+
+
+
+ Length of the extension lines
+
+
+
+
+ Length of the extension line
+beyond the dimension line
+
+
+
+
+ Shows the dimension line and arrows
+
+
+
+
+ Command
+
+
+ Transform
+
+
+
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts
index 1bb7dc7d90..7f4be56212 100644
--- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts
@@ -692,9 +692,9 @@
Dialog
-
+
Dialog
@@ -2494,15 +2494,15 @@ Specify another file please.
FemMaterial
-
+
FEM material
-
+
Material
@@ -2527,9 +2527,9 @@ Specify another file please.
-
+
TextLabel
@@ -2875,17 +2875,17 @@ Specify another file please.
+
+
+
-
-
-
0 mm
@@ -2900,11 +2900,11 @@ Specify another file please.
-
+
-
+
Parameter
@@ -2934,11 +2934,11 @@ Specify another file please.
-
+
+
-
-
+
Constraint Properties
@@ -2958,14 +2958,14 @@ Specify another file please.
+
+
+
-
-
-
unspecified
@@ -3016,8 +3016,8 @@ Specify another file please.
-
+
Cross section parameter
@@ -3068,30 +3068,30 @@ Specify another file please.
-
+
Velocity x:
-
+
Velocity y:
-
+
Velocity z:
-
-
-
+
+
+
m/s
@@ -3271,26 +3271,26 @@ Specify another file please.
-
-
-
-
-
+
+
+
+
+
A dialog is already open in the task panel
-
-
-
-
-
+
+
+
+
+
Do you want to close this dialog?
@@ -3422,10 +3422,10 @@ Specify another file please.
-
-
-
+
+
+
Are you sure you want to continue?
@@ -3771,10 +3771,10 @@ following referencing objects might be lost:
-
-
-
+
+
+
Object dependencies
@@ -5160,4 +5160,811 @@ normal vector of the face is used as direction
+
+ FEM_Analysis
+
+
+ Analysis container
+
+
+
+
+ Creates an analysis container with standard solver CalculiX
+
+
+
+
+ FEM_ClippingPlaneAdd
+
+
+ Clipping plane on face
+
+
+
+
+ Add a clipping plane on a selected face
+
+
+
+
+ FEM_ClippingPlaneRemoveAll
+
+
+
+ Remove all clipping planes
+
+
+
+
+ FEM_ConstantVacuumPermittivity
+
+
+ Constant vacuum permittivity
+
+
+
+
+ Creates a FEM constant vacuum permittivity to overwrite standard value
+
+
+
+
+ FEM_ConstraintBodyHeatSource
+
+
+ Constraint body heat source
+
+
+
+
+ Creates a FEM constraint body heat source
+
+
+
+
+ FEM_ConstraintCentrif
+
+
+ Constraint centrif
+
+
+
+
+ Creates a FEM constraint centrif
+
+
+
+
+ FEM_ConstraintElectrostaticPotential
+
+
+ Constraint electrostatic potential
+
+
+
+
+ Creates a FEM constraint electrostatic potential
+
+
+
+
+ FEM_ConstraintFlowVelocity
+
+
+ Constraint flow velocity
+
+
+
+
+ Creates a FEM constraint flow velocity
+
+
+
+
+ FEM_ConstraintInitialFlowVelocity
+
+
+ Constraint initial flow velocity
+
+
+
+
+ Creates a FEM constraint initial flow velocity
+
+
+
+
+ FEM_ConstraintInitialPressure
+
+
+ Constraint initial pressure
+
+
+
+
+ Creates a FEM constraint initial pressure
+
+
+
+
+ FEM_ConstraintSectionPrint
+
+
+ Constraint sectionprint
+
+
+
+
+ Creates a FEM constraint sectionprint
+
+
+
+
+ FEM_ConstraintSelfWeight
+
+
+ Constraint self weight
+
+
+
+
+ Creates a FEM constraint self weight
+
+
+
+
+ FEM_ConstraintTie
+
+
+ Constraint tie
+
+
+
+
+ Creates a FEM constraint tie
+
+
+
+
+ FEM_ElementFluid1D
+
+
+ Fluid section for 1D flow
+
+
+
+
+ Creates a FEM fluid section for 1D flow
+
+
+
+
+ FEM_ElementGeometry1D
+
+
+ Beam cross section
+
+
+
+
+ Creates a FEM beam cross section
+
+
+
+
+ FEM_ElementGeometry2D
+
+
+ Shell plate thickness
+
+
+
+
+ Creates a FEM shell plate thickness
+
+
+
+
+ FEM_ElementRotation1D
+
+
+ Beam rotation
+
+
+
+
+ Creates a FEM beam rotation
+
+
+
+
+ FEM_EquationElectrostatic
+
+
+ Electrostatic equation
+
+
+
+
+ Creates a FEM equation for electrostatic
+
+
+
+
+ FEM_EquationElasticity
+
+
+ Elasticity equation
+
+
+
+
+ Creates a FEM equation for elasticity
+
+
+
+
+ FEM_EquationFlow
+
+
+ Flow equation
+
+
+
+
+ Creates a FEM equation for flow
+
+
+
+
+ FEM_EquationFlux
+
+
+ Flux equation
+
+
+
+
+ Creates a FEM equation for flux
+
+
+
+
+ FEM_EquationElectricforce
+
+
+ Electricforce equation
+
+
+
+
+ Creates a FEM equation for electric forces
+
+
+
+
+ FEM_EquationHeat
+
+
+ Heat equation
+
+
+
+
+ Creates a FEM equation for heat
+
+
+
+
+ FEM_Examples
+
+
+
+ Open FEM examples
+
+
+
+
+ FEM_MaterialEditor
+
+
+ Material editor
+
+
+
+
+ Opens the FreeCAD material editor
+
+
+
+
+ FEM_MaterialFluid
+
+
+ Material for fluid
+
+
+
+
+ Creates a FEM material for fluid
+
+
+
+
+ FEM_MaterialMechanicalNonlinear
+
+
+ Nonlinear mechanical material
+
+
+
+
+ Creates a nonlinear mechanical material
+
+
+
+
+ FEM_MaterialReinforced
+
+
+ Reinforced material (concrete)
+
+
+
+
+ Creates a material for reinforced matrix material such as concrete
+
+
+
+
+ FEM_MaterialSolid
+
+
+ Material for solid
+
+
+
+
+ Creates a FEM material for solid
+
+
+
+
+ FEM_FEMMesh2Mesh
+
+
+ FEM mesh to mesh
+
+
+
+
+ Convert the surface of a FEM mesh to a mesh
+
+
+
+
+ FEM_MeshBoundaryLayer
+
+
+ FEM mesh boundary layer
+
+
+
+
+ Creates a FEM mesh boundary layer
+
+
+
+
+ FEM_MeshClear
+
+
+ Clear FEM mesh
+
+
+
+
+ Clear the Mesh of a FEM mesh object
+
+
+
+
+ FEM_MeshDisplayInfo
+
+
+
+ Display FEM mesh info
+
+
+
+
+ FEM_MeshGmshFromShape
+
+
+ FEM mesh from shape by Gmsh
+
+
+
+
+ Create a FEM mesh from a shape by Gmsh mesher
+
+
+
+
+ FEM_MeshGroup
+
+
+ FEM mesh group
+
+
+
+
+ Creates a FEM mesh group
+
+
+
+
+ FEM_MeshNetgenFromShape
+
+
+ FEM mesh from shape by Netgen
+
+
+
+
+ Create a FEM mesh from a solid or face shape by Netgen internal mesher
+
+
+
+
+ FEM_MeshRegion
+
+
+ FEM mesh region
+
+
+
+
+ Creates a FEM mesh region
+
+
+
+
+ FEM_ResultShow
+
+
+ Show result
+
+
+
+
+ Shows and visualizes selected result data
+
+
+
+
+ FEM_ResultsPurge
+
+
+ Purge results
+
+
+
+
+ Purges all results from active analysis
+
+
+
+
+ FEM_SolverCalculixCxxtools
+
+
+ Solver CalculiX Standard
+
+
+
+
+ Creates a standard FEM solver CalculiX with ccx tools
+
+
+
+
+ FEM_SolverCalculix
+
+
+ Solver CalculiX (new framework)
+
+
+
+
+ Creates a FEM solver CalculiX new framework (less result error handling)
+
+
+
+
+ FEM_SolverControl
+
+
+ Solver job control
+
+
+
+
+ Changes solver attributes and runs the calculations for the selected solver
+
+
+
+
+ FEM_SolverElmer
+
+
+ Solver Elmer
+
+
+
+
+ Creates a FEM solver Elmer
+
+
+
+
+ FEM_SolverMystran
+
+
+ Solver Mystran
+
+
+
+
+ Creates a FEM solver Mystran
+
+
+
+
+ FEM_SolverRun
+
+
+ Run solver calculations
+
+
+
+
+ Runs the calculations for the selected solver
+
+
+
+
+ FEM_SolverZ88
+
+
+ Solver Z88
+
+
+
+
+ Creates a FEM solver Z88
+
+
+
+
+ ControlWidget
+
+
+ Solver Control
+
+
+
+
+ Working Directory
+
+
+
+
+
+ Write
+
+
+
+
+
+
+
+ Edit
+
+
+
+
+ Elapsed Time:
+
+
+
+
+
+ Run
+
+
+
+
+
+ Re-write
+
+
+
+
+ Re-run
+
+
+
+
+ Abort
+
+
+
+
+ _Selector
+
+
+ Add
+
+
+
+
+ Remove
+
+
+
+
+ BoundarySelector
+
+
+ Select Faces/Edges/Vertexes
+
+
+
+
+ To add references: select them in the 3D view and click "Add".
+
+
+
+
+ SolidSelector
+
+
+ Select Solids
+
+
+
+
+ Select elements part of the solid that shall be added to the list. To add the solid click "Add".
+
+
+
+
+ GeometryElementsSelection
+
+
+ Geometry reference selector for a
+
+
+
+
+ Add
+
+
+
+
+ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{}
+
+
+
+
+ {}If no geometry is added to the list, all remaining ones are used.
+
+
+
+
+ Selection mode
+
+
+
+
+ Solid
+
+
+
+
+ FEM
+
+
+ Displacement Magnitude
+
+
+
+
+ Displacement X
+
+
+
+
+ Displacement Y
+
+
+
+
+ Displacement Z
+
+
+
+
+ von Mises Stress
+
+
+
+
+ Max Shear Stress
+
+
+
+
+ Max Principal Stress
+
+
+
+
+ Temperature
+
+
+
+
+ Mass Flow Rate
+
+
+
+
+ Network Pressure
+
+
+
+
+ Min Principal Stress
+
+
+
+
+ Equivalent Plastic Strain
+
+
+
+
+ Information
+
+
+
+
+ No histogram available.
+Please select a result type first.
+
+
+
+
+ Histogram of {}
+
+
+
+
+ Nodes
+
+
+
+
+ Empty result mesh
+
+
+
+
+
+ No result object
+
+
+
diff --git a/src/Mod/Image/Gui/Resources/translations/Image.ts b/src/Mod/Image/Gui/Resources/translations/Image.ts
index 62f070597f..c6da7418a9 100644
--- a/src/Mod/Image/Gui/Resources/translations/Image.ts
+++ b/src/Mod/Image/Gui/Resources/translations/Image.ts
@@ -214,4 +214,55 @@
+
+ Image_Scaling
+
+
+ Scale image plane
+
+
+
+
+ Scales an image plane by defining a distance between two points
+
+
+
+
+ Dialog
+
+
+ Scale image plane
+
+
+
+
+ Distance
+
+
+
+
+ Select first point
+
+
+
+
+ Enter distance
+
+
+
+
+ Select ImagePlane
+
+
+
+
+ Select second point
+
+
+
+
+ Select Image Plane and type distance
+
+
+
diff --git a/src/Mod/Material/Resources/translations/Material.ts b/src/Mod/Material/Resources/translations/Material.ts
index bed2852842..4165bbb9f9 100644
--- a/src/Mod/Material/Resources/translations/Material.ts
+++ b/src/Mod/Material/Resources/translations/Material.ts
@@ -64,4 +64,22 @@
+
+ Material
+
+
+ Product URL
+
+
+
+
+ UserDefined
+
+
+
+
+ Name
+
+
+
diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts
index 82755d44ae..cdb81124e0 100644
--- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts
+++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts
@@ -564,4 +564,23 @@ Select a different shape, please.
+
+ MeshPart_FlatteningCommand
+
+
+ Unwrap Mesh
+
+
+
+
+
+ Find a flat representation of a mesh.
+
+
+
+
+ Unwrap Face
+
+
+
diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts
index 09e6446de3..65217e07ff 100644
--- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts
+++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts
@@ -163,4 +163,320 @@
+
+ OpenSCAD
+
+
+ It looks like you may be using a Snap version of OpenSCAD.
+
+
+
+
+
+ If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism.
+
+
+
+
+ It looks like you may be using a sandboxed version of FreeCAD.
+
+
+
+
+ Unable to explode %s
+
+
+
+
+ Convert Edges to Faces
+
+
+
+
+ Please select 3 objects first
+
+
+
+
+
+ Add
+
+
+
+
+
+ Clear
+
+
+
+
+
+ Load
+
+
+
+
+
+ Save
+
+
+
+
+
+ Refresh
+
+
+
+
+
+ as Mesh
+
+
+
+
+
+ Add OpenSCAD Element
+
+
+
+
+
+ Perform
+
+
+
+
+
+ Mesh Boolean
+
+
+
+
+ OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality.
+
+
+
+
+ Error all shapes must be either 2D or both must be 3D
+
+
+
+
+
+ Unsupported Function
+
+
+
+
+
+ Press OK
+
+
+
+
+ Workbench
+
+
+ OpenSCADTools
+
+
+
+
+ Workbech
+
+
+ OpenSCAD Part tools
+
+
+
+
+ OpenSCAD_ExplodeGroup
+
+
+ Explode Group
+
+
+
+
+ Remove fusion, apply placement to children, and color randomly
+
+
+
+
+ OpenSCAD_ColorCodeShape
+
+
+ Color Shapes
+
+
+
+
+ Color Shapes by validity and type
+
+
+
+
+ OpenSCAD_Edgestofaces
+
+
+ Convert Edges To Faces
+
+
+
+
+ OpenSCAD_RefineShapeFeature
+
+
+ Refine Shape Feature
+
+
+
+
+ Create Refine Shape Feature
+
+
+
+
+ OpenSCAD_MirrorMeshFeature
+
+
+ Mirror Mesh Feature...
+
+
+
+
+ Create Mirror Mesh Feature
+
+
+
+
+ OpenSCAD_ScaleMeshFeature
+
+
+ Scale Mesh Feature...
+
+
+
+
+ Create Scale Mesh Feature
+
+
+
+
+ OpenSCAD_ResizeMeshFeature
+
+
+ Resize Mesh Feature...
+
+
+
+
+ Create Resize Mesh Feature
+
+
+
+
+ OpenSCAD_IncreaseToleranceFeature
+
+
+ Increase Tolerance Feature
+
+
+
+
+ Create Feature that allows to increase the tolerance
+
+
+
+
+ OpenSCAD_ExpandPlacements
+
+
+ Expand Placements
+
+
+
+
+ Expand all placements downwards the FeatureTree
+
+
+
+
+ OpenSCAD_ReplaceObject
+
+
+ Replace Object
+
+
+
+
+ Replace an object in the Feature Tree. Please select old, new, and parent object
+
+
+
+
+ OpenSCAD_RemoveSubtree
+
+
+ Remove Objects and their Children
+
+
+
+
+ Removes the selected objects and all children that are not referenced from other objects
+
+
+
+
+ OpenSCAD_AddOpenSCADElement
+
+
+ Add OpenSCAD Element...
+
+
+
+
+ Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary
+
+
+
+
+ OpenSCAD_MeshBoolean
+
+
+ Mesh Boolean...
+
+
+
+
+ Export objects as meshes and use OpenSCAD to perform a boolean operation
+
+
+
+
+ OpenSCAD_Hull
+
+
+ Hull
+
+
+
+
+ Perform Hull
+
+
+
+
+ OpenSCAD_Minkowski
+
+
+ Minkowski
+
+
+
+
+ Perform Minkowski
+
+
+
diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts
index 1e20a39758..d549f2e30c 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part.ts
@@ -5580,8 +5580,10 @@ in the 3D view for the sweep path.
QObject
-
+
+
+
Edit %1
@@ -5672,20 +5674,20 @@ Do you want to continue?
-
+
Face
-
+
Edge
-
+
Vertex
@@ -6042,6 +6044,11 @@ Do you want to continue?
Attachment editor
+
+
+ Create tube
+
+
Workbench
@@ -6106,4 +6113,374 @@ Do you want to continue?
+
+ Part_Tube
+
+
+ Create tube
+
+
+
+
+ Creates a tube
+
+
+
+
+ Part_JoinFeatures
+
+
+ Computing the result failed with an error:
+
+
+
+
+ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.
+
+
+
+
+
+
+
+ Bad selection
+
+
+
+
+ Continue
+
+
+
+
+ Select at least two objects, or one or more compounds
+
+
+
+
+ Select base object, then the object to embed, and then invoke this tool.
+
+
+
+
+ Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool.
+
+
+
+
+ Part_JoinConnect
+
+
+ Connect objects
+
+
+
+
+ Fuses objects, taking care to preserve voids.
+
+
+
+
+ Part_JoinEmbed
+
+
+ Embed object
+
+
+
+
+ Fuses one object into another, taking care to preserve voids.
+
+
+
+
+ Part_JoinCutout
+
+
+ Cutout for object
+
+
+
+
+ Makes a cutout in one object to fit another object.
+
+
+
+
+ Part_SplitFeatures
+
+
+
+
+ Computing the result failed with an error:
+
+
+
+
+
+
+ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.
+
+
+
+
+
+
+
+
+
+
+ Bad selection
+
+
+
+
+
+
+
+ Continue
+
+
+
+
+ Boolean fragments
+
+
+
+
+ Create a 'Boolean Fragments' object from two or more selected objects,
+or from the shapes inside a compound.
+This is a boolean union which is then sliced at the intersections
+of the original shapes.
+A 'Compound Filter' can be used to extract the individual slices.
+
+
+
+
+
+ Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid).
+
+
+
+
+ Slice to compound
+
+
+
+
+ Slice a selected object by using other objects as cutting tools.
+The resulting pieces will be stored in a compound.
+A 'Compound Filter' can be used to extract the individual slices.
+
+
+
+
+
+ Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with.
+
+
+
+
+ Slice apart
+
+
+
+
+ Slice a selected object by other objects, and split it apart.
+It will create a 'Compound Filter' for each slice.
+
+
+
+
+ Boolean XOR
+
+
+
+
+ Perform an 'exclusive OR' boolean operation with two or more selected objects,
+or with the shapes inside a compound.
+This means the overlapping volumes of the shapes will be removed.
+A 'Compound Filter' can be used to extract the remaining pieces.
+
+
+
+
+ Part_CompoundFilter
+
+
+ Compound Filter
+
+
+
+
+ Filter out objects from a selected compound by characteristics like volume,
+area, or length, or by choosing specific items.
+If a second object is selected, it will be used as reference, for example,
+for collision or distance filtering.
+
+
+
+
+ First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil.
+
+
+
+
+
+ Bad selection
+
+
+
+
+ Computing the result failed with an error:
+
+
+
+
+ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.
+
+
+
+
+ Part_ExplodeCompound
+
+
+ Explode compound
+
+
+
+
+ Split up a compound of shapes into separate objects.
+It will create a 'Compound Filter' for each shape.
+
+
+
+
+ First select a shape that is a compound.
+
+
+
+
+ Bad selection
+
+
+
+
+ AttachmentEditor
+
+
+ No object named {}
+
+
+
+
+ Failed to parse link (more than one colon encountered)
+
+
+
+
+ Object {} is neither movable nor attachable, can't edit attachment
+
+
+
+
+ {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric.
+
+
+
+
+
+ Attachment
+
+
+
+
+ Continue
+
+
+
+
+
+ Edit attachment of {}
+
+
+
+
+ Ignored. Can't attach object to itself!
+
+
+
+
+ {} depends on object being attached, can't use it for attachment
+
+
+
+
+ {} (add {})
+
+
+
+
+ {} (add more references)
+
+
+
+
+ Reference combinations:
+
+
+
+
+ Reference{}
+
+
+
+
+ Selecting...
+
+
+
+
+ Failed to resolve links. {}
+
+
+
+
+ Not attached
+
+
+
+
+ Attached with mode {}
+
+
+
+
+ Error: {}
+
+
+
+
+ Attachment Offset (in local coordinates):
+
+
+
+
+ Attachment Offset (inactive - not attached):
+
+
+
+
+ Part_EditAttachment
+
+
+ Attachment...
+
+
+
+
+ Edit attachment of selected object.
+
+
+
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
index b85937d0e5..1a82dc7659 100644
--- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
+++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
@@ -832,8 +832,8 @@ so that self intersection is avoided.
-
+
Make copy
@@ -858,8 +858,8 @@ so that self intersection is avoided.
-
+
Add a Body
@@ -3491,28 +3491,28 @@ click again to end selection
-
-
+
+
+
-
-
-
+
+
A dialog is already open in the task panel
-
-
+
+
+
-
-
-
+
+
Do you want to close this dialog?
@@ -3781,14 +3781,14 @@ This may lead to unexpected results.
-
+
Vertical sketch axis
-
+
Horizontal sketch axis
@@ -3840,11 +3840,11 @@ If you have a legacy document with PartDesign objects without Body, use the migr
-
+
+
-
Edit %1
@@ -4676,4 +4676,88 @@ over 90: larger hole radius at the bottom
+
+ PartDesign_InvoluteGear
+
+
+ Involute gear...
+
+
+
+
+ Creates or edit the involute gear definition.
+
+
+
+
+ PartDesign_Sprocket
+
+
+ Sprocket...
+
+
+
+
+ Creates or edit the sprocket definition.
+
+
+
+
+ WizardShaftTable
+
+
+ Length [mm]
+
+
+
+
+ Diameter [mm]
+
+
+
+
+ Inner diameter [mm]
+
+
+
+
+ Constraint type
+
+
+
+
+ Start edge type
+
+
+
+
+ Start edge size
+
+
+
+
+ End edge type
+
+
+
+
+ End edge size
+
+
+
+
+ WizardShaft
+
+
+
+ Shaft design wizard...
+
+
+
+
+
+ Start the shaft design wizard
+
+
+
diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot.ts b/src/Mod/Robot/Gui/Resources/translations/Robot.ts
index 997c4e8ad6..c4b6fd31fa 100644
--- a/src/Mod/Robot/Gui/Resources/translations/Robot.ts
+++ b/src/Mod/Robot/Gui/Resources/translations/Robot.ts
@@ -356,17 +356,17 @@
QObject
+
+
+
+
+
-
-
-
-
-
Wrong selection
@@ -381,11 +381,11 @@
+
-
Select one Robot and one Trajectory object.
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts
index fae9d2cdc1..4f26e80666 100644
--- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts
+++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts
@@ -2292,8 +2292,20 @@ invalid constraints, degenerated geometry, etc.
+
+
+
+
+
+
+
+
+
+
+
+
@@ -2426,15 +2438,6 @@ invalid constraints, degenerated geometry, etc.
-
-
-
-
-
-
-
-
-
@@ -2450,9 +2453,6 @@ invalid constraints, degenerated geometry, etc.
-
-
-
Wrong selection
@@ -2633,6 +2633,8 @@ invalid constraints, degenerated geometry, etc.
+
+
@@ -2640,8 +2642,6 @@ invalid constraints, degenerated geometry, etc.
-
-
Error
@@ -3123,9 +3123,9 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
+
-
CAD Kernel Error
@@ -5970,4 +5970,17 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster
+
+ Sketcher_ProfilesHexagon1
+
+
+ Creates a hexagonal profile
+
+
+
+
+ Creates a hexagonal profile in the sketch
+
+
+
diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts
index 162e5599df..6d9f0449c2 100644
--- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts
+++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts
@@ -943,14 +943,6 @@ Do you want to continue?
-
- SpreadsheetGui::Module
-
-
- Unnamed
-
-
-
SpreadsheetGui::SheetTableView
@@ -1106,4 +1098,111 @@ Do you want to continue?
+
+ Spreadsheet
+
+
+ Spreadsheet
+
+
+
+
+
+ Cell
+
+
+
+
+ Apply
+
+
+
+
+ Apply the changes to the current cell
+
+
+
+
+ Delete
+
+
+
+
+ Deletes the contents of the current cell
+
+
+
+
+ Compute
+
+
+
+
+ Updates the values handled by controllers
+
+
+
+
+ Create Spreadsheet
+
+
+
+
+ Add controller
+
+
+
+
+
+ Add property controller
+
+
+
+
+ Spreadsheet_Create
+
+
+ Spreadsheet
+
+
+
+
+ Adds a spreadsheet object to the active document
+
+
+
+
+ Spreadsheet_Controller
+
+
+ Add controller
+
+
+
+
+ Adds a cell controller to a selected spreadsheet
+
+
+
+
+ Spreadsheet_PropertyController
+
+
+ Add property controller
+
+
+
+
+ Adds a property controller to a selected spreadsheet
+
+
+
+
+ Py
+
+
+ Unnamed
+
+
+
diff --git a/src/Mod/Start/Gui/Resources/translations/Start.ts b/src/Mod/Start/Gui/Resources/translations/Start.ts
index 82e695191a..aded1de15c 100644
--- a/src/Mod/Start/Gui/Resources/translations/Start.ts
+++ b/src/Mod/Start/Gui/Resources/translations/Start.ts
@@ -276,9 +276,223 @@ By using ";;" to separate paths, you can add several folders here
Workbench
+
Start page
+
+ StartPage
+
+
+ Start
+
+
+
+
+ Documents
+
+
+
+
+ Help
+
+
+
+
+ Activity
+
+
+
+
+ Recent files
+
+
+
+
+ Tip
+
+
+
+
+ Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list
+
+
+
+
+ Examples
+
+
+
+
+ General documentation
+
+
+
+
+ User hub
+
+
+
+
+ This section contains documentation useful for FreeCAD users in general: a list of all the workbenches, detailed instructions on how to install and use the FreeCAD application, tutorials, and all you need to get started.
+
+
+
+
+ Power users hub
+
+
+
+
+ This section gathers documentation for advanced users and people interested in writing python scripts. You will also find there a repository of macros, instructions on how to install and use them, and more information about customizing FreeCAD to your specific needs.
+
+
+
+
+ Developers hub
+
+
+
+
+ This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application.
+
+
+
+
+ Manual
+
+
+
+
+ The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available.
+
+
+
+
+ Workbenches documentation
+
+
+
+
+ These are the help pages of all the workbenches currently installed on this computer.
+
+
+
+
+ Getting help from the community
+
+
+
+
+ The <a href="http://forum.freecadweb.org">FreeCAD forum</a> is a great place to get help from other FreeCAD users and developers. The forum has many sections for different types of issues and discussion subjects. If in doubt, post in the more general <a href="https://forum.freecadweb.org/viewforum.php?f=3">Help on using FreeCAD</a> section.
+
+
+
+
+ If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first!
+
+
+
+
+ FreeCAD also maintains a public <a href="https://www.freecadweb.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting.
+
+
+
+
+ Available addons
+
+
+
+
+ Below is a list of available extra workbenches that can be added to your FreeCAD installation. Browse and install them from menu Tools -> Addons manager. You can learn more about any of them by clicking the links below.
+
+
+
+
+ If not bundled with your FreeCAD version, install the FreeCAD documentation package to get documentation hubs, workbench help and individual command documentation without an internet connection.
+
+
+
+
+ Cannot fetch information from GitHub. <a href="EnableDownload.py">Authorize FreeCAD to access the internet</a> and reload the Start page.
+
+
+
+
+ Recent commits
+
+
+
+
+ Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecadweb.org/wiki/Downloads">available options</a> if you wish to obtain a development version.
+
+
+
+
+ See all commits on github
+
+
+
+
+ You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder
+
+
+
+
+ version
+
+
+
+
+ build
+
+
+
+
+ Create new...
+
+
+
+
+ Unknown
+
+
+
+
+ Forum
+
+
+
+
+ The latest posts on the <a href="https://forum.freecadweb.org">FreeCAD forum</a>:
+
+
+
+
+ To open any of the links above in your desktop browser, Right-click -> Open in external browser
+
+
+
+
+ Creation date
+
+
+
+
+ Last modification
+
+
+
+
+ Notes
+
+
+
+
+ Open start page preferences
+
+
+
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts
index b49779615c..e4283e4b50 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts
@@ -2014,8 +2014,8 @@
-
+
Save page to dxf
@@ -2604,6 +2604,16 @@
QObject
+
+
+
+
+
+
+
+
+
+
@@ -2621,16 +2631,6 @@
-
-
-
-
-
-
-
-
-
-
Wrong selection
@@ -2662,42 +2662,42 @@
-
-
-
-
+
+
+
-
-
-
+
+
+
+
Incorrect selection
-
+
Select an object first
-
+
Too many objects selected
-
+
Create a page first.
-
+
No View of a Part in selection.
@@ -2809,6 +2809,8 @@
+
+
@@ -2818,8 +2820,6 @@
-
-
Incorrect Selection
@@ -2920,9 +2920,6 @@
-
-
-
@@ -2941,6 +2938,11 @@
+
+
+
+
+
@@ -2948,16 +2950,14 @@
+
+
+
-
-
-
-
-
Task In Progress
@@ -2967,9 +2967,6 @@
-
-
-
@@ -2988,6 +2985,11 @@
+
+
+
+
+
@@ -2995,16 +2997,14 @@
+
+
+
-
-
-
-
-
Close active task dialog and try again.
@@ -3256,8 +3256,8 @@
-
+
Are you sure you want to continue?
@@ -3292,9 +3292,9 @@
-
+
Rich text editor
@@ -3412,8 +3412,8 @@
-
+
Edit %1
@@ -3578,19 +3578,19 @@ it has a weld symbol that would become broken.
-
-
-
-
+
+
+
-
-
-
-
+
+
+
+
+
Object dependencies
@@ -3600,20 +3600,20 @@ it has a weld symbol that would become broken.
-
+
You cannot delete this view because it has a section view that would become broken.
-
+
You cannot delete this view because it has a detail view that would become broken.
-
+
You cannot delete this view because it has a leader line that would become broken.
@@ -7928,4 +7928,97 @@ using the given X/Y Spacing
+
+ TechDraw_MoveView
+
+
+ Move View
+
+
+
+
+ Move a View to a new Page
+
+
+
+
+ Move View to a different Page
+
+
+
+
+ Select View to move from list.
+
+
+
+
+ Select View
+
+
+
+
+ Select From Page.
+
+
+
+
+
+ Select Page
+
+
+
+
+ Select To Page.
+
+
+
+
+ TechDraw_ShareView
+
+
+ Share View
+
+
+
+
+ Share a View on a second Page
+
+
+
+
+ Share View with another Page
+
+
+
+
+ View to share
+
+
+
+
+ Select View to share from list.
+
+
+
+
+ Select View
+
+
+
+
+ Select From Page.
+
+
+
+
+
+ Select Page
+
+
+
+
+ Select To Page.
+
+
+
diff --git a/src/Mod/Tux/Resources/translations/Tux.ts b/src/Mod/Tux/Resources/translations/Tux.ts
index 6401616dba..1cf3264dc1 100644
--- a/src/Mod/Tux/Resources/translations/Tux.ts
+++ b/src/Mod/Tux/Resources/translations/Tux.ts
@@ -1,4 +1,102 @@
+
+ NavigationIndicator
+
+
+ Select
+
+
+
+
+ Zoom
+
+
+
+
+ Rotate
+
+
+
+
+ Pan
+
+
+
+
+ Tilt
+
+
+
+
+ Navigation style
+
+
+
+
+ Page Up or Page Down key.
+
+
+
+
+ Rotation focus
+
+
+
+
+ Middle mouse button or H key.
+
+
+
+
+ Middle mouse button.
+
+
+
+
+ Navigation style not recognized.
+
+
+
+
+ Settings
+
+
+
+
+ Orbit style
+
+
+
+
+ Compact
+
+
+
+
+ Tooltip
+
+
+
+
+ Turntable
+
+
+
+
+ Free Turntable
+
+
+
+
+ Trackball
+
+
+
+
+ Undefined
+
+
+
diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts
index e88f8ba648..484881ec18 100644
--- a/src/Mod/Web/Gui/Resources/translations/Web.ts
+++ b/src/Mod/Web/Gui/Resources/translations/Web.ts
@@ -128,8 +128,8 @@
QObject
-
+
Browser