From 8acd9f8734adde32d2ea426d530d002b607513c1 Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Thu, 26 Aug 2021 14:50:54 +0200 Subject: [PATCH] Updated ts files --- src/Gui/Language/FreeCAD.ts | 39 +- .../Resources/translations/AddonManager.ts | 104 ++--- src/Mod/Arch/Resources/translations/Arch.ts | 252 ++++++------ src/Mod/Draft/Resources/translations/Draft.ts | 113 +++--- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 10 +- .../Resources/translations/OpenSCAD.ts | 4 +- .../Part/Gui/Resources/translations/Part.ts | 20 +- .../Gui/Resources/translations/PartDesign.ts | 384 +++++++++++------- .../Path/Gui/Resources/translations/Path.ts | 365 +++++++++-------- .../Gui/Resources/translations/TechDraw.ts | 323 ++++++++------- 10 files changed, 881 insertions(+), 733 deletions(-) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 72d75d33f6..0d2b9cad2c 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -3214,19 +3214,50 @@ You can also use the form: John Doe <john@doe.com> - <html><head/><body><p>Load the selected workbenches, adding their preference windows to the preferences dialog.</p></body></html> + Workbench Name - Load Selected + Autoload? - <html><head/><body><p>Available unloaded workbenches</p></body></html> + Load Now - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation, but are not yet loaded:</p></body></html> + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + + + + Gui::Dialog::DlgSettingsLazyLoadedImp + + Workbench + + + + Autoload + + + + If checked + + + + will be loaded automatically when FreeCAD starts up + + + + This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change. + + + + Loaded + + + + Load now diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index 9565c39f7e..7112c6c5ca 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -3,7 +3,7 @@ AddonInstaller - + Installed location @@ -21,257 +21,257 @@ - + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! - + Addon manager - + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - + Checking for updates... - + Apply - + update(s) - + No update available - + Macro successfully installed. The macro is now available from the Macros dialog. - + Unable to install - + Addon successfully removed. Please restart FreeCAD - + Unable to remove this addon - + Macro successfully removed. - + Macro could not be removed. - + Unable to download addon list. - + Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. - + Retrieving description... - + Retrieving info from - + An update is available for this addon. - + This addon is already installed. - + Retrieving info from git - + Retrieving info from wiki - + GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench - + Missing python module - + Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench - + Please install the missing components first. - + Error: Unable to download - + Successfully installed - + GitPython not installed! Cannot retrieve macros from git - + Installed - + Update available - + Restart required - + This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed - + Python Markdown library is missing. diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 8683b6b0a4..0e96a52b21 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -948,32 +948,32 @@ - + The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) @@ -1053,7 +1053,7 @@ - + The number of the wire that defines the hole. A value of 0 means automatic @@ -1073,7 +1073,7 @@ - + The axes this system is made of @@ -1203,7 +1203,7 @@ - + The placement of this axis system @@ -1223,57 +1223,57 @@ - + An optional unit to express levels - + A transformation to apply to the level mark - + If true, show the level - + If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level - + The font to be used for texts - + The font size of texts - + Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click - + The individual face colors - + If set to True, the working plane will be kept on Auto mode @@ -1418,42 +1418,42 @@ - + Enable this to make the wall generate blocks - + The length of each block - + The height of each block - + The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks - + The size of the joints between each block - + The number of entire blocks - + The number of broken blocks @@ -1603,27 +1603,27 @@ - + If true, show the objects contained in this Building Part will adopt these line, color and transparency settings - + The line width of child objects - + The line color of child objects - + The shape color of child objects - + The transparency of child objects @@ -1643,37 +1643,37 @@ - + If true, display offset will affect the origin mark too - + If true, the object's label is displayed - + If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode. - + A slot to save the inventor representation of this object, if enabled - + Cut the view above this level - + The distance between the level plane and the cut line - + Turn cutting on when activating this level @@ -1868,22 +1868,22 @@ - + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - + The area of this wall as a simple Height * Length calculation - + If True, double-clicking this object in the tree activates it @@ -2046,7 +2046,7 @@ Arch - + Components @@ -2056,7 +2056,7 @@ - + Axes @@ -2066,27 +2066,27 @@ - + Remove - + Add - + Axis - + Distance - + Angle @@ -2196,7 +2196,7 @@ - + Create Wall @@ -2221,42 +2221,42 @@ - + Edit - + Create/update component - + Base 2D object - + Wires - + Create new component - + Name - + Type - + Thickness @@ -2331,22 +2331,22 @@ - + Merge Wall - + Please select only wall objects - + Merge Walls - + Distances (mm) and angles (deg) between axes @@ -2797,22 +2797,22 @@ - + Hinge - + Opening mode - + Get selected edge - + Press to retrieve the selected edge @@ -2842,17 +2842,17 @@ - + Wall Presets... - + Hole wire - + Pick selected @@ -2867,67 +2867,67 @@ - + Label - + Axis system components - + Grid - + Total width - + Total height - + Add row - + Del row - + Add col - + Del col - + Create span - + Remove span - + Rows - + Columns @@ -2942,12 +2942,12 @@ - + Error: Unable to modify the base object of this wall - + Window elements @@ -3012,22 +3012,22 @@ - + Auto height is larger than height - + Total row size is larger than height - + Auto width is larger than width - + Total column size is larger than width @@ -3242,7 +3242,7 @@ - + Center @@ -3277,12 +3277,12 @@ - + The selected wall contains no subwall to merge - + Cannot compute blocks for wall @@ -3292,27 +3292,27 @@ - + Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default - + If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here @@ -3467,37 +3467,37 @@ - + First point of wall - + Wall options - + This list shows all the MultiMaterials objects of this document. Create some to define wall types. - + Alignment - + Left - + Right - + Use sketches @@ -3667,17 +3667,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + This window has no defined opening - + Invert opening direction - + Invert hinge position @@ -3909,7 +3909,7 @@ Floor creation aborted. Arch_AxisTools - + Axis tools @@ -4083,62 +4083,62 @@ Floor creation aborted. Arch_Grid - + The number of rows - + The number of columns - + The sizes for rows - + The sizes of columns - + The span ranges of cells that are merged together - + The type of 3D points produced by this grid object - + The total width of this grid - + The total height of this grid - + Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide @@ -4180,12 +4180,12 @@ Floor creation aborted. Arch_MergeWalls - + Merge Walls - + Merges the selected walls, if possible @@ -4560,12 +4560,12 @@ Floor creation aborted. Arch_Wall - + Wall - + Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4883,7 +4883,7 @@ Leave blank to use all objects from the document Draft - + Writing camera position diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 7e6857db1a..3907a8aea3 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -1392,7 +1392,7 @@ from menu Tools -> Addon Manager - + Unable to insert new object into a scaled part @@ -1536,7 +1536,7 @@ The array can be turned into a polar or a circular array by changing its type. - + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction @@ -1956,12 +1956,12 @@ It must be at least 2. Draft_AddConstruction - + Add to Construction group - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -2662,18 +2662,6 @@ You may also select a three vertices or a Working Plane Proxy. Draft_SetWorkingPlaneProxy - - - Create working plane proxy - - - - - Creates a proxy object from the current working plane. -Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. -Then you can use it to save a different camera position and objects' states any time you need. - - Draft_Shape2DView @@ -3127,6 +3115,21 @@ convert closed edges into filled faces and parametric polygons, and merge faces + + Draft_WorkingPlaneProxy + + + Create working plane proxy + + + + + Creates a proxy object from the current working plane. +Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. +Then you can use it to save a different camera position and objects' states any time you need. + + + Form @@ -4949,12 +4952,12 @@ Note: C++ exporter is faster, but is not as featureful yet ImportDWG - + Conversion successful - + Converting: @@ -5003,7 +5006,7 @@ Note: C++ exporter is faster, but is not as featureful yet - + None @@ -5058,7 +5061,7 @@ Note: C++ exporter is faster, but is not as featureful yet - + Angle @@ -5103,7 +5106,7 @@ Note: C++ exporter is faster, but is not as featureful yet - + Offset @@ -5183,7 +5186,7 @@ Note: C++ exporter is faster, but is not as featureful yet - + Distance @@ -5450,22 +5453,22 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Top - + Front - + Side - + Current working plane @@ -5490,15 +5493,10 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Offset distance - - - Trim distance - - Change default style for new objects @@ -6663,7 +6661,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Stretch @@ -6673,27 +6671,27 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick first point of selection rectangle - + Pick opposite point of selection rectangle - + Pick start point of displacement - + Pick end point of displacement - + Turning one Rectangle into a Wire @@ -6798,37 +6796,27 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick distance - - The offset distance - - - - - The offset angle - - - - + Unable to trim these objects, only Draft wires and arcs are supported. - + Unable to trim these objects, too many wires - + These objects don't intersect. - + Too many intersection points. @@ -6858,22 +6846,22 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Pick a face, 3 vertices or a WP Proxy to define the drawing plane - + Working plane aligned to global placement of - + Dir - + Custom @@ -6983,12 +6971,12 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Add new Layer - + Add to construction group @@ -7008,7 +6996,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Offset of Bezier curves is currently not supported @@ -7222,6 +7210,11 @@ Not available if Draft preference option 'Use Part Primitives' is enab + + + Offset angle + + importOCA diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 4f4a6ffe68..99f8010f96 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -74,11 +74,6 @@ Geometry reference selector for a - - - Geometry reference selector for a - - Add @@ -134,6 +129,11 @@ Solid + + + Geometry reference selector for a + + SolidSelector diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index c9e9842827..aa9c7d8695 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -141,12 +141,12 @@ - + Unsupported Function - + Press OK diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 0e5288138c..53eb1a0e5e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -337,6 +337,16 @@ A 'Compound Filter' can be used to extract the individual slices.Slice apart + + + Boolean Fragments + + + + + Split objects where they intersect + + Slice a selected object by other objects, and split it apart. @@ -356,16 +366,6 @@ This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - - - - - Split objects where they intersect - - Continue diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index 109a868fdc..69e586c180 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -1,6 +1,88 @@ + + PartDesign_InvoluteGear + + + Involute gear... + + + + + Creates or edit the involute gear definition. + + + + + PartDesign_Sprocket + + + Sprocket... + + + + + Creates or edit the sprocket definition. + + + + + WizardShaft + + + Shaft design wizard... + + + + + Start the shaft design wizard + + + + + WizardShaftTable + + + Length [mm] + + + + + Diameter [mm] + + + + + Inner diameter [mm] + + + + + Constraint type + + + + + Start edge type + + + + + Start edge size + + + + + End edge type + + + + + End edge size + + + CmdPartDesignAdditiveHelix @@ -975,18 +1057,18 @@ Geometric Primitives - - - - Width: - - Length: + + + + Width: + + @@ -996,12 +1078,6 @@ Height: - - - - Angle: - - @@ -1054,6 +1130,12 @@ Radius 2: + + + + Angle: + + @@ -1223,13 +1305,13 @@ If zero, it is equal to Radius2 - - End point + + Start point - - Start point + + End point @@ -1377,6 +1459,11 @@ click again to end selection Add + + + Remove + + - select an item to highlight it @@ -1423,11 +1510,6 @@ click again to end selection Angle - - - Remove - - @@ -1699,6 +1781,11 @@ click again to end selection Add + + + Remove + + - select an item to highlight it @@ -1710,11 +1797,6 @@ click again to end selection Radius: - - - Remove - - @@ -1868,16 +1950,6 @@ click again to end selection PartDesignGui::TaskHoleParameters - - - Hole parameters - - - - - None - - Counterbore @@ -1903,6 +1975,16 @@ click again to end selection Cap screw (deprecated) + + + Hole parameters + + + + + None + + ISO metric regular profile @@ -3264,6 +3346,11 @@ click again to end selection Cannot use this command as there is no solid to subtract from. + + + Ensure that the body contains a feature before attempting a subtractive command. + + Cannot use selected object. Selected object must belong to the active body @@ -3302,21 +3389,6 @@ click again to end selection Select an edge, face, or body from a single body. - - - Select an edge, face, or body from an active body. - - - - - Please create a feature first. - - - - - Please select only one feature in an active body. - - @@ -3324,8 +3396,8 @@ click again to end selection - - Ensure that the body contains a feature before attempting a subtractive command. + + Select an edge, face, or body from an active body. @@ -3353,6 +3425,16 @@ click again to end selection No valid features in this document + + + Please create a feature first. + + + + + Please select only one feature in an active body. + + Part creation failed @@ -4077,11 +4159,26 @@ Although you will be able to migrate any moment later with 'Part Design -&g Task Hole Parameters + + + <b>Threading and size</b> + + + + + Profile + + Whether the hole gets a thread + + + Threaded + + Whether the hole gets a modelled thread @@ -4124,6 +4221,26 @@ Note that the calculation can take some time Custom Thread clearance value + + + Direction + + + + + Right hand + + + + + Left hand + + + + + Size + + Hole clearance @@ -4149,16 +4266,44 @@ Only available for holes without thread Wide + + + Class + + Tolerance class for threaded holes according to hole profile + + + + Diameter + + Hole diameter + + + + Depth + + + + + + Dimension + + + + + Through all + + Thread Depth @@ -4174,47 +4319,17 @@ Only available for holes without thread Tapped (DIN76) + + + <b>Hole cut</b> + + Type - - - Taper angle for the hole -90 degree: straight hole -under 90: smaller hole radius at the bottom -over 90: larger hole radius at the bottom - - - - - Reverses the hole direction - - - - - Reversed - - - - - - Diameter - - - - - - Depth - - - - - Class - - Cut type for screw heads @@ -4231,24 +4346,13 @@ over 90: larger hole radius at the bottom - - The size of the drill point will be taken into -account for the depth of blind holes + + Countersink angle - - Take into account for depth - - - - - Tapered - - - - - Direction + + <b>Drill point</b> @@ -4262,49 +4366,14 @@ account for the depth of blind holes - - Right hand + + The size of the drill point will be taken into +account for the depth of blind holes - - Left hand - - - - - Threaded - - - - - Profile - - - - - Countersink angle - - - - - - Dimension - - - - - Through all - - - - - Size - - - - - <b>Drill point</b> + + Take into account for depth @@ -4313,13 +4382,26 @@ account for the depth of blind holes - - <b>Hole cut</b> + + Tapered - - <b>Threading and size</b> + + Taper angle for the hole +90 degree: straight hole +under 90: smaller hole radius at the bottom +over 90: larger hole radius at the bottom + + + + + Reverses the hole direction + + + + + Reversed @@ -4349,13 +4431,13 @@ account for the depth of blind holes Workbench - - &Part Design + + &Sketch - - &Sketch + + &Part Design diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 673c8798be..fe43965285 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -28,11 +28,51 @@ Dropcutter lines are created parallel to this axis. + + + The direction along which dropcutter lines are created + + + + + Should the operation be limited by the stock object or by the bounding box of the base object + + Additional offset to the selected bounding box + + + Step over percentage of the drop cutter path + + + + + Z-axis offset from the surface of the object + + + + + The Sample Interval. Small values cause long wait times + + + + + Enable optimization which removes unnecessary points from G-Code output + + + + + The completion mode for the operation: single or multi-pass + + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + The model will be rotated around this axis. @@ -43,6 +83,21 @@ Start index(angle) for rotational scan + + + Ignore areas that proceed below specified depth. + + + + + Depth used to identify waste areas to ignore. + + + + + Cut through waste to depth at model edge, releasing the model. + + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -188,11 +243,6 @@ The path to be copied - - - The base geometry of this toolpath - - The tool controller that will be used to calculate the path @@ -508,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + + Start pocketing at center or boundary @@ -649,63 +704,8 @@ - - The direction along which dropcutter lines are created - - - - - Should the operation be limited by the stock object or by the bounding box of the base object - - - - - Step over percentage of the drop cutter path - - - - - Z-axis offset from the surface of the object - - - - - The Sample Interval. Small values cause long wait times - - - - - Enable optimization which removes unnecessary points from G-Code output - - - - - The completion mode for the operation: single or multi-pass - - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - - - - Ignore areas that proceed below specified depth. - - - - - Depth used to identify waste areas to ignore. - - - - - Cut through waste to depth at model edge, releasing the model. - - - - - The library to use to generate the path + + The base geometry of this toolpath @@ -987,13 +987,13 @@ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -1153,8 +1153,28 @@ Increased to stock top. - - Ignoring non-horizontal Face + + Face appears misaligned after initial rotation. + + + + + Consider toggling the 'InverseAngle' property and recomputing. + + + + + Multiple faces in Base Geometry. + + + + + Depth settings will be applied to all faces. + + + + + EnableRotation property is 'Off'. @@ -1223,28 +1243,8 @@ Increased to stock top. - - Face appears misaligned after initial rotation. - - - - - Consider toggling the 'InverseAngle' property and recomputing. - - - - - Multiple faces in Base Geometry. - - - - - Depth settings will be applied to all faces. - - - - - EnableRotation property is 'Off'. + + Ignoring non-horizontal Face @@ -1375,6 +1375,19 @@ Increased to stock top. + + PathArray + + + No base objects for PathArray. + + + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + + PathCustom @@ -1969,6 +1982,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + Normal @@ -2019,16 +2042,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. - - - Pocket Shape - - - - - Creates a Path Pocket object from a face or faces - - 3D Pocket @@ -3439,16 +3452,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - - - - - Creates a Path Dess-up object from a selected path - - Please select one path object @@ -3466,6 +3469,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object + + + Dress-up + + + + + Creates a Path Dess-up object from a selected path + + Path_DressupAxisMap @@ -3938,6 +3951,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object + + + The selected object is not a path + + + Please select one path object @@ -3953,12 +3972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop - - - The selected object is not a path - - - Path_Inspect @@ -4285,6 +4298,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height + + + The Job has no selected Base object. + + Maximum Z Height @@ -4455,11 +4473,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Date - - - The Job has no selected Base object. - - It appears the machine limits haven't been set. Not able to check path extents. @@ -4615,6 +4628,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + + Add Tool Controller to the Job @@ -4625,11 +4643,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller - - - Tool Number to Load - - Path_ToolTable @@ -4656,6 +4669,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4666,11 +4684,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - - Path_Waterline @@ -4705,11 +4718,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library + + + Tooltable JSON (*.json) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + Open tooltable + + + Save tooltable + + + + + Rename Tooltable + + + + + Enter Name: + + + + + Add New Tool Table + + + + + Delete Selected Tool Table + + + + + Rename Selected Tool Table + + Tooltable editor @@ -4920,11 +4978,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - - Tooltable XML (*.xml) @@ -4940,46 +4993,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property - - - Rename Tooltable - - - - - Enter Name: - - - - - Add New Tool Table - - - - - Delete Selected Tool Table - - - - - Rename Selected Tool Table - - - - - Tooltable JSON (*.json) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index bd77485c4b..dc7bda3d59 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -4,7 +4,7 @@ Cmd2LineCenterLine - + Add Centerline between 2 Lines @@ -12,7 +12,7 @@ Cmd2PointCenterLine - + Add Centerline between 2 Points @@ -36,12 +36,12 @@ CmdTechDraw2LineCenterLine - + TechDraw - + Add Centerline between 2 Lines @@ -49,12 +49,12 @@ CmdTechDraw2PointCenterLine - + TechDraw - + Add Centerline between 2 Points @@ -62,12 +62,12 @@ CmdTechDraw2PointCosmeticLine - + TechDraw - + Add Cosmetic Line Through 2 Points @@ -114,12 +114,12 @@ CmdTechDrawAnnotation - + TechDraw - + Insert Annotation @@ -158,17 +158,17 @@ CmdTechDrawCenterLineGroup - + TechDraw - + Insert Center Line - + Add Centerline to Faces @@ -215,12 +215,12 @@ CmdTechDrawCosmeticEraser - + TechDraw - + Remove Cosmetic Object @@ -228,12 +228,12 @@ CmdTechDrawCosmeticVertex - + TechDraw - + Add Cosmetic Vertex @@ -259,17 +259,17 @@ CmdTechDrawDecorateLine - + TechDraw - + Change Appearance of Lines - + Change Appearance of selected Lines @@ -393,12 +393,12 @@ CmdTechDrawFaceCenterLine - + TechDraw - + Add Centerline to Faces @@ -406,12 +406,12 @@ CmdTechDrawGeometricHatch - + TechDraw - + Apply Geometric Hatch to Face @@ -419,12 +419,12 @@ CmdTechDrawHatch - + TechDraw - + Hatch a Face using Image File @@ -458,28 +458,28 @@ CmdTechDrawImage - + TechDraw - + Insert Bitmap Image - - + + Insert Bitmap from a file into a page - + Select an Image File - + Image (*.png *.jpg *.jpeg) @@ -539,12 +539,12 @@ CmdTechDrawMidpoints - + TechDraw - + Add Midpoint Vertices @@ -606,12 +606,12 @@ CmdTechDrawQuadrants - + TechDraw - + Add Quadrant Vertices @@ -671,12 +671,12 @@ CmdTechDrawShowAll - + TechDraw - + Show/Hide Invisible Edges @@ -720,13 +720,13 @@ CmdTechDrawToggleFrame - + TechDraw - - + + Turn View Frames On/Off @@ -778,12 +778,12 @@ CmdTechDrawWeldSymbol - + TechDraw - + Add Welding Information to Leaderline @@ -848,7 +848,17 @@ - + + Add Midpont Vertices + + + + + Add Quadrant Vertices + + + + Create Annotation @@ -865,17 +875,17 @@ - + Create Hatch - + Create GeomHatch - + Create Image @@ -906,7 +916,12 @@ - + + Create Cosmetic Line + + + + Update CosmeticLine @@ -965,6 +980,11 @@ Edit WeldSymbol + + + Add Cosmetic Vertex + + MRichTextEdit @@ -1181,22 +1201,22 @@ - + Create a link - + Link URL: - + Select an image - + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) @@ -1220,13 +1240,13 @@ - - - - - - - + + + + + + + Wrong selection @@ -1344,8 +1364,8 @@ - - + + Incorrect Selection @@ -1431,9 +1451,9 @@ - - - + + + Incorrect selection @@ -1470,18 +1490,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1492,18 +1512,18 @@ - - - - - - - - - - - - + + + + + + + + + + + + @@ -1521,27 +1541,27 @@ - - - + + - - + + - - - - + + + + - - - - - - - - - + + + + + + + + + + Wrong Selection @@ -1552,152 +1572,152 @@ - - - + + + You must select a base View for the line. - + No DrawViewPart objects in this selection - - + + No base View in Selection. - + You must select Faces or an existing CenterLine. - + No CenterLine in selection. - - - + + + Selection is not a CenterLine. - + Selection not understood. - + You must select 2 Vertexes or an existing CenterLine. - + Need 2 Vertices or 1 CenterLine. - + Selection is empty. - + Not enough points in selection. - + Selection is not a Cosmetic Line. - + You must select 2 Vertexes. - + No View in Selection. - + You must select a View and/or lines. - + No Part Views in this selection - + Select exactly one Leader line or one Weld symbol. - - + + Nothing selected - + At least 1 object in selection is not a part view - + Unknown object type in selection - + Replace Hatch? - + Some Faces in selection are already hatched. Replace? - + No TechDraw Page - + Need a TechDraw Page for this command - + Select a Face first - + No TechDraw object in selection - + Create a page to insert. - - + + No Faces to hatch in this selection @@ -1795,6 +1815,7 @@ + Rich text editor @@ -3447,6 +3468,14 @@ Do you want to continue? + + TechDrawGui::QGIViewAnnotation + + + Text + + + TechDrawGui::SymbolChooser @@ -3802,17 +3831,17 @@ Do you want to continue? - + Pick a point for cosmetic vertex - + Left click to set a point - + In progress edit abandoned. Start over. @@ -4986,7 +5015,7 @@ using the given X/Y Spacing TechDraw_2LineCenterLine - + Adds a Centerline between 2 Lines @@ -4994,7 +5023,7 @@ using the given X/Y Spacing TechDraw_2PointCenterLine - + Adds a Centerline between 2 Points @@ -5010,7 +5039,7 @@ using the given X/Y Spacing TechDraw_FaceCenterLine - + Adds a Centerline to Faces