Updated ts files

2021-08-26 14:50:54 +02:00
parent e359c01cc9
commit a8cb3ef1e3
10 changed files with 881 additions and 733 deletions
--- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
+++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts
@@ -1,6 +1,88 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE TS>
 <TS version="2.1">
+<context>
+    <name>PartDesign_InvoluteGear</name>
+    <message>
+        <location filename="InvoluteGearFeature.py" line="57"/>
+        <source>Involute gear...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="InvoluteGearFeature.py" line="61"/>
+        <source>Creates or edit the involute gear definition.</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>PartDesign_Sprocket</name>
+    <message>
+        <location filename="SprocketFeature.py" line="62"/>
+        <source>Sprocket...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="SprocketFeature.py" line="66"/>
+        <source>Creates or edit the sprocket definition.</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>WizardShaft</name>
+    <message>
+        <location filename="WizardShaft.py" line="211"/>
+        <source>Shaft design wizard...</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaft.py" line="212"/>
+        <source>Start the shaft design wizard</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
+<context>
+    <name>WizardShaftTable</name>
+    <message>
+        <location filename="WizardShaftTable.py" line="43"/>
+        <source>Length [mm]</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="44"/>
+        <source>Diameter [mm]</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="45"/>
+        <source>Inner diameter [mm]</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="46"/>
+        <source>Constraint type</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="47"/>
+        <source>Start edge type</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="48"/>
+        <source>Start edge size</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="49"/>
+        <source>End edge type</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="WizardShaftTable.py" line="53"/>
+        <source>End edge size</source>
+        <translation type="unfinished"></translation>
+    </message>
+</context>
 <context>
    <name>CmdPartDesignAdditiveHelix</name>
    <message>
@@ -975,18 +1057,18 @@
        <source>Geometric Primitives</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../TaskPrimitiveParameters.ui" line="82"/>
-        <location filename="../../TaskPrimitiveParameters.ui" line="173"/>
-        <source>Width:</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskPrimitiveParameters.ui" line="62"/>
        <location filename="../../TaskPrimitiveParameters.ui" line="153"/>
        <source>Length:</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskPrimitiveParameters.ui" line="82"/>
+        <location filename="../../TaskPrimitiveParameters.ui" line="173"/>
+        <source>Width:</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskPrimitiveParameters.ui" line="193"/>
        <location filename="../../TaskPrimitiveParameters.ui" line="287"/>
@@ -996,12 +1078,6 @@
        <source>Height:</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../TaskPrimitiveParameters.ui" line="551"/>
-        <location filename="../../TaskPrimitiveParameters.ui" line="1620"/>
-        <source>Angle:</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskPrimitiveParameters.ui" line="267"/>
        <location filename="../../TaskPrimitiveParameters.ui" line="625"/>
@@ -1054,6 +1130,12 @@
        <source>Radius 2:</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskPrimitiveParameters.ui" line="551"/>
+        <location filename="../../TaskPrimitiveParameters.ui" line="1620"/>
+        <source>Angle:</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskPrimitiveParameters.ui" line="674"/>
        <location filename="../../TaskPrimitiveParameters.ui" line="896"/>
@@ -1223,13 +1305,13 @@ If zero, it is equal to Radius2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskPrimitiveParameters.ui" line="2160"/>
-        <source>End point</source>
+        <location filename="../../TaskPrimitiveParameters.ui" line="2086"/>
+        <source>Start point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskPrimitiveParameters.ui" line="2086"/>
-        <source>Start point</source>
+        <location filename="../../TaskPrimitiveParameters.ui" line="2160"/>
+        <source>End point</source>
        <translation type="unfinished"></translation>
    </message>
 </context>
@@ -1377,6 +1459,11 @@ click again to end selection</source>
        <source>Add</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskChamferParameters.ui" line="40"/>
+        <source>Remove</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskChamferParameters.ui" line="52"/>
        <source>- select an item to highlight it
@@ -1423,11 +1510,6 @@ click again to end selection</source>
        <source>Angle</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../TaskChamferParameters.ui" line="40"/>
-        <source>Remove</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskChamferParameters.cpp" line="176"/>
        <location filename="../../TaskChamferParameters.cpp" line="178"/>
@@ -1699,6 +1781,11 @@ click again to end selection</source>
        <source>Add</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskFilletParameters.ui" line="40"/>
+        <source>Remove</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskFilletParameters.ui" line="52"/>
        <source>- select an item to highlight it
@@ -1710,11 +1797,6 @@ click again to end selection</source>
        <source>Radius:</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../TaskFilletParameters.ui" line="40"/>
-        <source>Remove</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskFilletParameters.cpp" line="131"/>
        <location filename="../../TaskFilletParameters.cpp" line="133"/>
@@ -1868,16 +1950,6 @@ click again to end selection</source>
 </context>
 <context>
    <name>PartDesignGui::TaskHoleParameters</name>
-    <message>
-        <location filename="../../TaskHoleParameters.cpp" line="60"/>
-        <source>Hole parameters</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.cpp" line="70"/>
-        <source>None</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskHoleParameters.cpp" line="52"/>
        <source>Counterbore</source>
@@ -1903,6 +1975,16 @@ click again to end selection</source>
        <source>Cap screw (deprecated)</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.cpp" line="60"/>
+        <source>Hole parameters</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.cpp" line="70"/>
+        <source>None</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.cpp" line="71"/>
        <source>ISO metric regular profile</source>
@@ -3264,6 +3346,11 @@ click again to end selection</source>
        <source>Cannot use this command as there is no solid to subtract from.</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../Command.cpp" line="1057"/>
+        <source>Ensure that the body contains a feature before attempting a subtractive command.</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../Command.cpp" line="1078"/>
        <source>Cannot use selected object. Selected object must belong to the active body</source>
@@ -3302,21 +3389,6 @@ click again to end selection</source>
        <source>Select an edge, face, or body from a single body.</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../Command.cpp" line="1839"/>
-        <source>Select an edge, face, or body from an active body.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../Command.cpp" line="2158"/>
-        <source>Please create a feature first.</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../Command.cpp" line="2167"/>
-        <source>Please select only one feature in an active body.</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../Command.cpp" line="1838"/>
        <location filename="../../Command.cpp" line="2166"/>
@@ -3324,8 +3396,8 @@ click again to end selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../Command.cpp" line="1057"/>
-        <source>Ensure that the body contains a feature before attempting a subtractive command.</source>
+        <location filename="../../Command.cpp" line="1839"/>
+        <source>Select an edge, face, or body from an active body.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
@@ -3353,6 +3425,16 @@ click again to end selection</source>
        <source>No valid features in this document</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../Command.cpp" line="2158"/>
+        <source>Please create a feature first.</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../Command.cpp" line="2167"/>
+        <source>Please select only one feature in an active body.</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../CommandBody.cpp" line="71"/>
        <source>Part creation failed</source>
@@ -4077,11 +4159,26 @@ Although you will be able to migrate any moment later with &apos;Part Design -&g
        <source>Task Hole Parameters</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="26"/>
+        <source>&lt;b&gt;Threading and size&lt;/b&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="39"/>
+        <source>Profile</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="68"/>
        <source>Whether the hole gets a thread</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="71"/>
+        <source>Threaded</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="84"/>
        <source>Whether the hole gets a modelled thread</source>
@@ -4124,6 +4221,26 @@ Note that the calculation can take some time</source>
        <source>Custom Thread clearance value</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="171"/>
+        <source>Direction</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="190"/>
+        <source>Right hand</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="206"/>
+        <source>Left hand</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="222"/>
+        <source>Size</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="270"/>
        <source>Hole clearance
@@ -4149,16 +4266,44 @@ Only available for holes without thread</source>
        <source>Wide</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="299"/>
+        <source>Class</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="318"/>
        <source>Tolerance class for threaded holes according to hole profile</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="331"/>
+        <location filename="../../TaskHoleParameters.ui" line="536"/>
+        <source>Diameter</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="350"/>
        <source>Hole diameter</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="369"/>
+        <location filename="../../TaskHoleParameters.ui" line="577"/>
+        <source>Depth</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="389"/>
+        <location filename="../../TaskHoleParameters.ui" line="446"/>
+        <source>Dimension</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="394"/>
+        <source>Through all</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="421"/>
        <source>Thread Depth</source>
@@ -4174,47 +4319,17 @@ Only available for holes without thread</source>
        <source>Tapped (DIN76)</source>
        <translation type="unfinished"></translation>
    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="475"/>
+        <source>&lt;b&gt;Hole cut&lt;/b&gt;</source>
+        <translation type="unfinished"></translation>
+    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="488"/>
        <location filename="../../TaskHoleParameters.ui" line="666"/>
        <source>Type</source>
        <translation type="unfinished"></translation>
    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="767"/>
-        <source>Taper angle for the hole
-90 degree: straight hole
-under 90: smaller hole radius at the bottom
-over 90: larger hole radius at the bottom</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="789"/>
-        <source>Reverses the hole direction</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="792"/>
-        <source>Reversed</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="331"/>
-        <location filename="../../TaskHoleParameters.ui" line="536"/>
-        <source>Diameter</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="369"/>
-        <location filename="../../TaskHoleParameters.ui" line="577"/>
-        <source>Depth</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="299"/>
-        <source>Class</source>
-        <translation type="unfinished"></translation>
-    </message>
    <message>
        <location filename="../../TaskHoleParameters.ui" line="507"/>
        <source>Cut type for screw heads</source>
@@ -4231,24 +4346,13 @@ over 90: larger hole radius at the bottom</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="730"/>
-        <source>The size of the drill point will be taken into
-account for the depth of blind holes</source>
+        <location filename="../../TaskHoleParameters.ui" line="615"/>
+        <source>Countersink angle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="734"/>
-        <source>Take into account for depth</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="754"/>
-        <source>Tapered</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="171"/>
-        <source>Direction</source>
+        <location filename="../../TaskHoleParameters.ui" line="650"/>
+        <source>&lt;b&gt;Drill point&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
@@ -4262,49 +4366,14 @@ account for the depth of blind holes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="190"/>
-        <source>Right hand</source>
+        <location filename="../../TaskHoleParameters.ui" line="730"/>
+        <source>The size of the drill point will be taken into
+account for the depth of blind holes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="206"/>
-        <source>Left hand</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="71"/>
-        <source>Threaded</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="39"/>
-        <source>Profile</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="615"/>
-        <source>Countersink angle</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="389"/>
-        <location filename="../../TaskHoleParameters.ui" line="446"/>
-        <source>Dimension</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="394"/>
-        <source>Through all</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="222"/>
-        <source>Size</source>
-        <translation type="unfinished"></translation>
-    </message>
-    <message>
-        <location filename="../../TaskHoleParameters.ui" line="650"/>
-        <source>&lt;b&gt;Drill point&lt;/b&gt;</source>
+        <location filename="../../TaskHoleParameters.ui" line="734"/>
+        <source>Take into account for depth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
@@ -4313,13 +4382,26 @@ account for the depth of blind holes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="475"/>
-        <source>&lt;b&gt;Hole cut&lt;/b&gt;</source>
+        <location filename="../../TaskHoleParameters.ui" line="754"/>
+        <source>Tapered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../TaskHoleParameters.ui" line="26"/>
-        <source>&lt;b&gt;Threading and size&lt;/b&gt;</source>
+        <location filename="../../TaskHoleParameters.ui" line="767"/>
+        <source>Taper angle for the hole
+90 degree: straight hole
+under 90: smaller hole radius at the bottom
+over 90: larger hole radius at the bottom</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="789"/>
+        <source>Reverses the hole direction</source>
+        <translation type="unfinished"></translation>
+    </message>
+    <message>
+        <location filename="../../TaskHoleParameters.ui" line="792"/>
+        <source>Reversed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
@@ -4349,13 +4431,13 @@ account for the depth of blind holes</source>
 <context>
    <name>Workbench</name>
    <message>
-        <location filename="../../Workbench.cpp" line="54"/>
-        <source>&amp;Part Design</source>
+        <location filename="../../Workbench.cpp" line="52"/>
+        <source>&amp;Sketch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
-        <location filename="../../Workbench.cpp" line="52"/>
-        <source>&amp;Sketch</source>
+        <location filename="../../Workbench.cpp" line="54"/>
+        <source>&amp;Part Design</source>
        <translation type="unfinished"></translation>
    </message>
    <message>