From b0fcac8ddc95b06cedfb1a74a7622909ddb85a68 Mon Sep 17 00:00:00 2001 From: GaryH Date: Wed, 4 Nov 2020 16:54:48 +0100 Subject: [PATCH] Modify code format to PEP8 Add --marlin-config argument Marlin requires certain configuration settings in order to work well with FreeCAD. Those configuration settings will be added to the end of the gcode file as comments, when --marlin-config is entered as a post processor argument. For PEP8 conformity: Change some double-quotes to single-quotes. Change sequence of import statements. Modify code format to PEP8 Indentation and line length meet PEP8 requirements. Other aspects of PEP8 are partially implemented. Add code to remove embedded comments Also, minor tweaks throughout Change outstring to outList for clarity Change format_outstring to format_outList Change: if PathUtil.opProperty(obj, 'Active') is False: To: if PathUtil.opProperty(obj, 'Active') == False: Format file to PEP8 standard Format first pass using: autopep8 --in-place --aggressive --aggressive Manually adjust format for better appearance Recheck format using http://pep8online.com/ Change code related to pythonopen into with open() code Minor refactoring --- src/Mod/Path/PathScripts/post/marlin_post.py | 1197 ++++++++++-------- 1 file changed, 673 insertions(+), 524 deletions(-) diff --git a/src/Mod/Path/PathScripts/post/marlin_post.py b/src/Mod/Path/PathScripts/post/marlin_post.py index af975e812f..5e4c6ea02d 100644 --- a/src/Mod/Path/PathScripts/post/marlin_post.py +++ b/src/Mod/Path/PathScripts/post/marlin_post.py @@ -1,49 +1,50 @@ # -*- coding: utf-8 -*- -# *************************************************************************** -# * * -# * (c) sliptonic (shopinthewoods@gmail.com) 2014 * -# * (c) Gauthier Briere - 2018, 2019 * -# * (c) Schildkroet - 2019-2020 * -# * (c) Gary L Hasson - 2020 * -# * * -# * This file is part of the FreeCAD CAx development system. * -# * * -# * This program is free software; you can redistribute it and/or modify * -# * it under the terms of the GNU Lesser General Public License (LGPL) * -# * as published by the Free Software Foundation; either version 2 of * -# * the License, or (at your option) any later version. * -# * for detail see the LICENCE text file. * -# * * -# * FreeCAD is distributed in the hope that it will be useful, * -# * but WITHOUT ANY WARRANTY; without even the implied warranty of * -# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * -# * GNU Lesser General Public License for more details. * -# * * -# * You should have received a copy of the GNU Library General Public * -# * License along with FreeCAD; if not, write to the Free Software * -# * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * -# * USA * -# * * -# ***************************************************************************/ +# ***************************************************************************** +# * * +# * (c) sliptonic (shopinthewoods@gmail.com) 2014 * +# * (c) Gauthier Briere - 2018, 2019 * +# * (c) Schildkroet - 2019-2020 * +# * (c) Gary L Hasson - 2020 * +# * * +# * This file is part of the FreeCAD CAx development system. * +# * * +# * This program is free software; you can redistribute it and/or modify * +# * it under the terms of the GNU Lesser General Public License (LGPL) * +# * as published by the Free Software Foundation; either version 2 of * +# * the License, or (at your option) any later version. * +# * for detail see the LICENCE text file. * +# * * +# * FreeCAD is distributed in the hope that it will be useful, * +# * but WITHOUT ANY WARRANTY; without even the implied warranty of * +# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * +# * GNU Lesser General Public License for more details. * +# * * +# * You should have received a copy of the GNU Library General Public * +# * License along with FreeCAD; if not, write to the Free Software * +# * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * +# * USA * +# * * +# ***************************************************************************** -Revised = "2020-10-22" # Revision date for this file. - -''' -Due to the fundamentals of the FreeCAD pre-processor, -this post processor can only operate in the following modes: -G90 Absolute positions -G21 Metric units (mm) -G17 XY plane (3 axis vertical milling only) -''' - +from datetime import datetime +import argparse +import shlex import FreeCAD from FreeCAD import Units -import PathScripts.PostUtils as PostUtils -import argparse -import datetime -import shlex import PathScripts.PathUtil as PathUtil +import PathScripts.PostUtils as PostUtils + +Revised = '2020-11-03' # Revision date for this file. + +# ***************************************************************************** +# * Due to the fundamentals of the FreeCAD pre-processor, * +# * this post processor can only operate in the following modes: * +# * G90 Absolute positions * +# * G21 Metric units (mm) * +# * G17 XY plane (3 axis vertical milling only) * +# * * +# ***************************************************************************** TOOLTIP = ''' @@ -52,570 +53,718 @@ import marlin_post marlin_post.export(object, "/path/to/file.nc") ''' -# *************************************************************************** -# * Initial configuration, not changeable -# *************************************************************************** -MOTION_MODE = 'G90' # G90 only, for absolute moves -WORK_PLANE = 'G17' # G17 only, XY plane, for vertical milling -UNITS = 'G21' # G21 only, for metric +# ***************************************************************************** +# * Initial configuration, not changeable * +# ***************************************************************************** +MOTION_MODE = 'G90' # G90 only, for absolute moves +WORK_PLANE = 'G17' # G17 only, XY plane, for vertical milling +UNITS = 'G21' # G21 only, for metric UNIT_FORMAT = 'mm' UNIT_FEED_FORMAT = 'mm/s' -# *************************************************************************** -# * Initial configuration, changeable via command line arguments -# *************************************************************************** -PRECISION = 3 # Decimal places displayed for metric -DRILL_RETRACT_MODE = 'G98' # End of drill-cycle retractation type. G99 is the alternative. -TRANSLATE_DRILL_CYCLES = True # If true, G81, G82, and G83 are translated into G0/G1 moves -OUTPUT_TOOL_CHANGE = False # Do not output M6 tool change (comment it) -RETURN_TO = None # None = No movement at end of program -SPINDLE_WAIT = 3.0 # 0 == No waiting after M3 / M4 -MODAL = False # True: Commands are suppressed if they are the same as the previous line -LINENR = 100 # Line number starting value -LINEINCR = 10 # Line number increment -PRE_OPERATION = '''''' # Pre operation text will be inserted before every operation -POST_OPERATION = '''''' # Post operation text will be inserted after every operation -TOOL_CHANGE = '''''' # Tool Change commands will be inserted before a tool change +# ***************************************************************************** +# * Initial configuration, changeable via command line arguments * +# ***************************************************************************** +PRECISION = 3 # Decimal places displayed for metric +DRILL_RETRACT_MODE = 'G98' # End of drill-cycle retractation type. G99 +# is the alternative. +TRANSLATE_DRILL_CYCLES = True # If true, G81, G82, and G83 are translated +# into G0/G1 moves +OUTPUT_TOOL_CHANGE = False # Do not output M6 tool change (comment it) +RETURN_TO = None # None = No movement at end of program +SPINDLE_WAIT = 3 # 0 == No waiting after M3 / M4 +MODAL = False # True: Commands are suppressed if they are +# the same as the previous line +LINENR = 100 # Line number starting value +LINEINCR = 10 # Line number increment +PRE_OPERATION = '''''' # Pre operation text will be inserted before +# every operation +POST_OPERATION = '''''' # Post operation text will be inserted after +# every operation +TOOL_CHANGE = '''''' # Tool Change commands will be inserted +# before a tool change -# *************************************************************************** -# * Initial gcode output options, changeable via command line arguments -# *************************************************************************** -OUTPUT_COMMENTS = True # Comments in output gcode file -OUTPUT_FINISH = False # Include an operation finished comment -OUTPUT_PATH = False # Include a Path: comment -OUTPUT_HEADER = True # Output header in output gcode file -OUTPUT_LINE_NUMBERS = False # Output line numbers in output gcode file -OUTPUT_BCNC = False # Add bCNC operation block headers in output gcode file -SHOW_EDITOR = True # Display the resulting gcode file +# ***************************************************************************** +# * Initial gcode output options, changeable via command line arguments * +# ***************************************************************************** +OUTPUT_HEADER = True # Output header in output gcode file +OUTPUT_COMMENTS = True # Comments in output gcode file +OUTPUT_FINISH = False # Include an operation finished comment +OUTPUT_PATH = False # Include a Path: comment +OUTPUT_MARLIN_CONFIG = False # Display expected #defines for Marlin config +OUTPUT_LINE_NUMBERS = False # Output line numbers in output gcode file +OUTPUT_BCNC = False # Add bCNC operation block headers in output +# gcode file +SHOW_EDITOR = True # Display the resulting gcode file -# *************************************************************************** -# * Command line arguments -# *************************************************************************** +# ***************************************************************************** +# * Command line arguments * +# ***************************************************************************** parser = argparse.ArgumentParser(prog='marlin', add_help=False) -parser.add_argument('--comments', action='store_true', help='output comment (default)') -parser.add_argument('--no-comments', action='store_true', help='suppress comment output') -parser.add_argument('--finish-comments', action='store_true', help='output finish-comment') -parser.add_argument('--no-finish-comments', action='store_true', help='suppress finish-comment output (default)') -parser.add_argument('--path-comments', action='store_true', help='output path-comment') -parser.add_argument('--no-path-comments', action='store_true', help='suppress path-comment output (default)') -parser.add_argument('--header', action='store_true', help='output headers (default)') -parser.add_argument('--no-header', action='store_true', help='suppress header output') -parser.add_argument('--line-numbers', action='store_true', help='prefix with line numbers') -parser.add_argument('--no-line-numbers', action='store_true', help='do not prefix with line numbers (default)') -parser.add_argument('--show-editor', action='store_true', help='pop up editor before writing output (default)') -parser.add_argument('--no-show-editor', action='store_true', help='do not pop up editor before writing output') -parser.add_argument('--precision', default='3', help='number of digits of precision, default=3') -parser.add_argument('--translate_drill', action='store_true', help='translate drill cycles G81, G82, and G83 into G0/G1 movements (default)') -parser.add_argument('--no-translate_drill', action='store_true', help='do not translate drill cycles G81, G82, and G83 into G0/G1 movements') -parser.add_argument('--preamble', help='set commands to be issued before the first command, default="G80\nG17\nG90\nG21"') -parser.add_argument('--postamble', help='set commands to be issued after the last command, default="G80\nM5\nG17\nG90\nG21"') -parser.add_argument('--tool-change', action='store_true', help='Insert M6 for all tool changes') -parser.add_argument('--wait-for-spindle', type=int, default=0, help='Wait for spindle to reach desired speed after M3 or M4, default=0') -parser.add_argument('--return-to', default='', help='Move to the specified coordinates at the end, e.g. --return-to="3.175, 4.702, 50.915"') -parser.add_argument('--bcnc', action='store_true', help='Add Job operations as bCNC block headers. Consider suppressing existing comments: Add argument --no-comments') -parser.add_argument('--no-bcnc', action='store_true', help='suppress bCNC block header output (default)') +parser.add_argument( + '--header', + action='store_true', + help='output headers (default)') +parser.add_argument( + '--no-header', + action='store_true', + help='suppress header output') +parser.add_argument( + '--comments', + action='store_true', + help='output comment (default)') +parser.add_argument( + '--no-comments', + action='store_true', + help='suppress comment output') +parser.add_argument( + '--finish-comments', + action='store_true', + help='output finish-comment') +parser.add_argument( + '--no-finish-comments', + action='store_true', + help='suppress finish-comment output (default)') +parser.add_argument( + '--path-comments', + action='store_true', + help='output path-comment') +parser.add_argument( + '--no-path-comments', + action='store_true', + help='suppress path-comment output (default)') +parser.add_argument( + '--marlin-config', + action='store_true', + help='output #defines for Marlin') +parser.add_argument( + '--no-marlin-config', + action='store_true', + help='suppress output #defines for Marlin (default)') +parser.add_argument( + '--line-numbers', + action='store_true', + help='prefix with line numbers') +parser.add_argument( + '--no-line-numbers', + action='store_true', + help='do not prefix with line numbers (default)') +parser.add_argument( + '--show-editor', + action='store_true', + help='pop up editor before writing output (default)') +parser.add_argument( + '--no-show-editor', + action='store_true', + help='do not pop up editor before writing output') +parser.add_argument( + '--precision', + default='3', + help='number of digits of precision, default=3') +parser.add_argument( + '--translate_drill', + action='store_true', + help='translate drill cycles G81, G82, G83 into G0/G1 movements (default)') +parser.add_argument( + '--no-translate_drill', + action='store_true', + help='do not translate drill cycles G81, G82, G83 into G0/G1 movements') +parser.add_argument( + '--preamble', + help='set commands to be issued before the first command, default=""') +parser.add_argument( + '--postamble', + help='set commands to be issued after the last command, default="M5"') +parser.add_argument( + '--tool-change', action='store_true', + help='Insert M6 for all tool changes') +parser.add_argument( + '--wait-for-spindle', + type=int, + default=3, + help='Wait for spindle to reach desired speed after M3 or M4, default=0') +parser.add_argument( + '--return-to', + default='', + help='When done, move to, e.g. --return-to="3.175, 4.702, 50.915"') +parser.add_argument( + '--bcnc', + action='store_true', + help='Add Job operations as bCNC block headers. \ + Consider suppressing existing comments: Add argument --no-comments') +parser.add_argument( + '--no-bcnc', + action='store_true', + help='suppress bCNC block header output (default)') TOOLTIP_ARGS = parser.format_help() -''' -Marlin 2.x: -Ignores commands that it does not implement. -Some machining-related commands may conflict with gcodes that Marlin has used for 3D printing. -Therefore, check FreeCAD gcodes for conflicts with Marlin. -Marlin 2.x ignores the ENTIRE COMMAND LINE if there is more than one command per line. -''' +# ***************************************************************************** +# * Marlin 2.x: * +# * Ignores commands that it does not implement. * +# * Some machining-related commands may conflict with gcodes that Marlin * +# * has assigned to 3D printing commands. * +# * Therefore, check FreeCAD gcodes for conflicts with Marlin. * +# * Marlin 2.x ignores the ENTIRE COMMAND LINE if there is more than * +# * one command per line. * +# ***************************************************************************** + # Default preamble text will appear at the beginning of the gcode output file. -PREAMBLE = ''' -''' +PREAMBLE = '''''' # Default postamble text will appear following the last operation. POSTAMBLE = '''M5 ''' -# *************************************************************************** -# * Internal global variables -# *************************************************************************** +# ***************************************************************************** +# * Internal global variables * +# ***************************************************************************** MOTION_COMMANDS = ['G0', 'G00', 'G1', 'G01', 'G2', 'G02', 'G3', 'G03'] -RAPID_MOVES = ['G0', 'G00'] # Rapid moves gcode commands definition -SUPPRESS_COMMANDS = [''] # These commands are ignored by commenting them out -COMMAND_SPACE = " " +RAPID_MOVES = ['G0', 'G00'] # Rapid moves gcode commands definition +SUPPRESS_COMMANDS = [''] # These commands are ignored by commenting them out +COMMAND_SPACE = ' ' # Global variables storing current position (Use None for safety.) CURRENT_X = None CURRENT_Y = None CURRENT_Z = None -# *************************************************************************** -# * To distinguish python built-in open function from the one declared below -# *************************************************************************** -if open.__module__ in ['__builtin__', 'io']: - pythonopen = open - - def processArguments(argstring): + global OUTPUT_HEADER + global OUTPUT_COMMENTS + global OUTPUT_FINISH + global OUTPUT_PATH + global OUTPUT_MARLIN_CONFIG + global OUTPUT_LINE_NUMBERS + global SHOW_EDITOR + global PREAMBLE + global POSTAMBLE + global UNITS + global UNIT_FEED_FORMAT + global UNIT_FORMAT + global TRANSLATE_DRILL_CYCLES + global OUTPUT_TOOL_CHANGE + global SPINDLE_WAIT + global RETURN_TO + global OUTPUT_BCNC + global PRECISION - global OUTPUT_HEADER - global OUTPUT_COMMENTS - global OUTPUT_FINISH - global OUTPUT_PATH - global OUTPUT_LINE_NUMBERS - global SHOW_EDITOR - global PRECISION - global PREAMBLE - global POSTAMBLE - global UNITS - global UNIT_FEED_FORMAT - global UNIT_FORMAT - global TRANSLATE_DRILL_CYCLES - global OUTPUT_TOOL_CHANGE - global SPINDLE_WAIT - global RETURN_TO - global OUTPUT_BCNC + try: + args = parser.parse_args(shlex.split(argstring)) + if args.no_header: + OUTPUT_HEADER = False + if args.header: + OUTPUT_HEADER = True + if args.no_comments: + OUTPUT_COMMENTS = False + if args.comments: + OUTPUT_COMMENTS = True + if args.no_finish_comments: + OUTPUT_FINISH = False + if args.finish_comments: + OUTPUT_FINISH = True + if args.no_path_comments: + OUTPUT_PATH = False + if args.path_comments: + OUTPUT_PATH = True + if args.no_marlin_config: + OUTPUT_MARLIN_CONFIG = False + if args.marlin_config: + OUTPUT_MARLIN_CONFIG = True + if args.no_line_numbers: + OUTPUT_LINE_NUMBERS = False + if args.line_numbers: + OUTPUT_LINE_NUMBERS = True + if args.no_show_editor: + SHOW_EDITOR = False + if args.show_editor: + SHOW_EDITOR = True + if args.preamble is not None: + PREAMBLE = args.preamble + if args.postamble is not None: + POSTAMBLE = args.postamble + if args.no_translate_drill: + TRANSLATE_DRILL_CYCLES = False + if args.translate_drill: + TRANSLATE_DRILL_CYCLES = True + if args.tool_change: + OUTPUT_TOOL_CHANGE = True + if args.return_to: + RETURN_TO = args.return_to + if RETURN_TO.find(',') == -1: + RETURN_TO = None + print('--return-to coordinates must be specified as:') + print('--return-to "x.n,y.n,z.n"') + if args.bcnc: + OUTPUT_BCNC = True + if args.no_bcnc: + OUTPUT_BCNC = False + SPINDLE_WAIT = args.wait_for_spindle + PRECISION = args.precision - try: - args = parser.parse_args(shlex.split(argstring)) - if args.no_header: - OUTPUT_HEADER = False - if args.header: - OUTPUT_HEADER = True - if args.no_comments: - OUTPUT_COMMENTS = False - if args.comments: - OUTPUT_COMMENTS = True - if args.no_finish_comments: - OUTPUT_FINISH = False - if args.finish_comments: - OUTPUT_FINISH = True - if args.no_path_comments: - OUTPUT_PATH = False - if args.path_comments: - OUTPUT_PATH = True - if args.no_line_numbers: - OUTPUT_LINE_NUMBERS = False - if args.line_numbers: - OUTPUT_LINE_NUMBERS = True - if args.no_show_editor: - SHOW_EDITOR = False - if args.show_editor: - SHOW_EDITOR = True - PRECISION = args.precision - if args.preamble is not None: - PREAMBLE = args.preamble - if args.postamble is not None: - POSTAMBLE = args.postamble - if args.no_translate_drill: - TRANSLATE_DRILL_CYCLES = False - if args.translate_drill: - TRANSLATE_DRILL_CYCLES = True - if args.tool_change: - OUTPUT_TOOL_CHANGE = True - if args.wait_for_spindle > 0: - SPINDLE_WAIT = args.wait_for_spindle - if args.return_to: - RETURN_TO = args.return_to - if RETURN_TO.find(',') == -1: - RETURN_TO = None - print('--return-to coordinates must be specified as:\n--return-to "x.n,y.n,z.n"') - if args.bcnc: - OUTPUT_BCNC = True - if args.no_bcnc: - OUTPUT_BCNC = False + except Exception as e: + return False - - except Exception as e: - return False - - return True + return True # For debug... def dump(obj): - for attr in dir(obj): - try: - if attr.startswith('__'): - continue - print(": >" + attr + "<") - attr_text = "%s = %s" % (attr, getattr(obj, attr)) - if attr in ['HorizFeed', 'VertFeed']: - print('==============\n', attr_text) - if 'mm/s' in attr_text: - print('===> metric values <===') - except: # Insignificant errors - # print("==>", obj, attr) - pass + for attr in dir(obj): + try: + if attr.startswith('__'): + continue + print('>' + attr + '<') + attr_text = "%s = %s" % (attr, getattr(obj, attr)) + if attr in ['HorizFeed', 'VertFeed']: + print('==============\n', attr_text) + if 'mm/s' in attr_text: + print('===> metric values <===') + except: # Insignificant errors + # print('==>', obj, attr) + pass + def export(objectslist, filename, argstring): + if not processArguments(argstring): + return None - if not processArguments(argstring): - return None + global UNITS + global UNIT_FORMAT + global UNIT_FEED_FORMAT + global MOTION_MODE + global SUPPRESS_COMMANDS - global UNITS - global UNIT_FORMAT - global UNIT_FEED_FORMAT - global MOTION_MODE - global SUPPRESS_COMMANDS + print('Post Processor: ' + __name__ + ' postprocessing...') + gcode = '' - print("Post Processor: " + __name__ + " postprocessing...") - gcode = "" + # Write header: + if OUTPUT_HEADER: + gcode += linenumber() + '(Exported by FreeCAD)\n' + gcode += linenumber() + '(Post Processor: ' + __name__ + gcode += '.py, version: ' + Revised + ')\n' + gcode += linenumber() + '(Output Time:' + str(datetime.now()) + ')\n' - # Write header: - if OUTPUT_HEADER: - gcode += linenumber() + "(Exported by FreeCAD)\n" - gcode += linenumber() + "(Post Processor: " + __name__ + ".py, version: " + Revised + ")\n" - gcode += linenumber() + "(Output Time:" + str(datetime.datetime.now()) + ")\n" + # Suppress drill-cycle commands: + if TRANSLATE_DRILL_CYCLES: + SUPPRESS_COMMANDS += ['G80', 'G98', 'G99'] - # Suppress drill-cycle commands: - if TRANSLATE_DRILL_CYCLES: - SUPPRESS_COMMANDS += ['G80', 'G98', 'G99'] - - # Write the preamble: - if OUTPUT_COMMENTS: - gcode += linenumber() + "(Begin preamble)\n" - for line in PREAMBLE.splitlines(True): - gcode += linenumber() + line - - # Write these settings after the preamble to prevent the preamble from changing these: - gcode += linenumber() + "(Default Configuration)\n" - gcode += linenumber() + MOTION_MODE + "\n" - gcode += linenumber() + UNITS + "\n" - gcode += linenumber() + WORK_PLANE + "\n" - - for obj in objectslist: - # Debug... - # print("\n" + "*"*70 + "\n") - # dump(obj) - # print("\n" + "*"*70 + "\n") - if not hasattr(obj, "Path"): - print("The object " + obj.Name + " is not a path. Please select only path and Compounds.") - return - - # Skip inactive operations: - if PathUtil.opProperty(obj, 'Active') is False: - continue - - # Do the pre_op: - if OUTPUT_BCNC: - gcode += linenumber() + "(Block-name: " + obj.Label + ")\n" - gcode += linenumber() + "(Block-expand: 0)\n" - gcode += linenumber() + "(Block-enable: 1)\n" + # Write the preamble: if OUTPUT_COMMENTS: - gcode += linenumber() + "(Begin operation: " + obj.Label + ")\n" - for line in PRE_OPERATION.splitlines(True): - gcode += linenumber() + line + gcode += linenumber() + '(Begin preamble)\n' + for line in PREAMBLE.splitlines(True): + gcode += linenumber() + line - # Get coolant mode: - coolantMode = 'None' - if hasattr(obj, "CoolantMode") or hasattr(obj, 'Base') and hasattr(obj.Base, "CoolantMode"): - if hasattr(obj, "CoolantMode"): - coolantMode = obj.CoolantMode - else: - coolantMode = obj.Base.CoolantMode - - # Turn coolant on if required: + # Write these settings AFTER the preamble, + # to prevent the preamble from changing these: if OUTPUT_COMMENTS: - if not coolantMode == 'None': - gcode += linenumber() + '(Coolant On:' + coolantMode + ')\n' - if coolantMode == 'Flood': - gcode += linenumber() + 'M8' + '\n' - if coolantMode == 'Mist': - gcode += linenumber() + 'M7' + '\n' + gcode += linenumber() + '(Default Configuration)\n' + gcode += linenumber() + MOTION_MODE + '\n' + gcode += linenumber() + UNITS + '\n' + gcode += linenumber() + WORK_PLANE + '\n' - # Parse the op: - gcode += parse(obj) + for obj in objectslist: + # Debug... + # print('\n' + '*'*70 + '\n') + # dump(obj) + # print('\n' + '*'*70 + '\n') + if not hasattr(obj, 'Path'): + print('The object ' + obj.Name + + ' is not a path. Please select only path and Compounds.') + return - # Do the post_op: - if OUTPUT_COMMENTS and OUTPUT_FINISH: - gcode += linenumber() + "(Finish operation: " + obj.Label + ")\n" - for line in POST_OPERATION.splitlines(True): - gcode += linenumber() + line + # Skip inactive operations: + if PathUtil.opProperty(obj, 'Active') is False: + continue - # Turn coolant off if required: - if not coolantMode == 'None': + # Do the pre_op: + if OUTPUT_BCNC: + gcode += linenumber() + '(Block-name: ' + obj.Label + ')\n' + gcode += linenumber() + '(Block-expand: 0)\n' + gcode += linenumber() + '(Block-enable: 1)\n' if OUTPUT_COMMENTS: - gcode += linenumber() + '(Coolant Off:' + coolantMode + ')\n' - gcode += linenumber() +'M9\n' + gcode += linenumber() + '(Begin operation: ' + obj.Label + ')\n' + for line in PRE_OPERATION.splitlines(True): + gcode += linenumber() + line - # Do the post_amble: - if OUTPUT_BCNC: - gcode += linenumber() + "(Block-name: post_amble)\n" - gcode += linenumber() + "(Block-expand: 0)\n" - gcode += linenumber() + "(Block-enable: 1)\n" - if OUTPUT_COMMENTS: - gcode += linenumber() + "(Begin postamble)\n" - for line in POSTAMBLE.splitlines(True): - gcode += linenumber() + line + # Get coolant mode: + coolantMode = 'None' # None is the word returned from the operation + if hasattr(obj, 'CoolantMode') or hasattr(obj, 'Base') and \ + hasattr(obj.Base, 'CoolantMode'): + if hasattr(obj, 'CoolantMode'): + coolantMode = obj.CoolantMode + else: + coolantMode = obj.Base.CoolantMode - # Optionally add a final XYZ position to the end of the gcode: - if RETURN_TO: - first_comma = RETURN_TO.find(',') - last_comma = RETURN_TO.rfind(',') # == first_comma if only one comma - ref_X = ' X' + RETURN_TO[0: first_comma].strip() + # Turn coolant on if required: + if OUTPUT_COMMENTS: + if not coolantMode == 'None': + gcode += linenumber() + '(Coolant On:' + coolantMode + ')\n' + if coolantMode == 'Flood': + gcode += linenumber() + 'M8\n' + if coolantMode == 'Mist': + gcode += linenumber() + 'M7\n' - # Z is optional: - if last_comma != first_comma: - ref_Z = ' Z' + RETURN_TO[last_comma + 1:].strip() - ref_Y = ' Y' + RETURN_TO[first_comma + 1: last_comma].strip() + # Parse the op: + gcode += parse(obj) + + # Do the post_op: + if OUTPUT_COMMENTS and OUTPUT_FINISH: + gcode += linenumber() + '(Finish operation: ' + obj.Label + ')\n' + for line in POST_OPERATION.splitlines(True): + gcode += linenumber() + line + + # Turn coolant off if previously enabled: + if not coolantMode == 'None': + if OUTPUT_COMMENTS: + gcode += linenumber() + '(Coolant Off:' + coolantMode + ')\n' + gcode += linenumber() + 'M9\n' + + # Do the post_amble: + if OUTPUT_BCNC: + gcode += linenumber() + '(Block-name: post_amble)\n' + gcode += linenumber() + '(Block-expand: 0)\n' + gcode += linenumber() + '(Block-enable: 1)\n' + if OUTPUT_COMMENTS: + gcode += linenumber() + '(Begin postamble)\n' + for line in POSTAMBLE.splitlines(True): + gcode += linenumber() + line + + # Optionally add a final XYZ position to the end of the gcode: + if RETURN_TO: + first_comma = RETURN_TO.find(',') + last_comma = RETURN_TO.rfind(',') # == first_comma if only one comma + ref_X = ' X' + RETURN_TO[0: first_comma].strip() + + # Z is optional: + if last_comma != first_comma: + ref_Z = ' Z' + RETURN_TO[last_comma + 1:].strip() + ref_Y = ' Y' + RETURN_TO[first_comma + 1:last_comma].strip() + else: + ref_Z = '' + ref_Y = ' Y' + RETURN_TO[first_comma + 1:].strip() + + gcode += linenumber() + 'G0' + ref_X + ref_Y + ref_Z + '\n' + + # Optionally add recommended Marlin 2.x configuration to gcode file: + if OUTPUT_MARLIN_CONFIG: + gcode += linenumber() + '(Marlin 2.x Configuration)\n' + gcode += linenumber() + '(The following should be enabled in)\n' + gcode += linenumber() + '(the configuration files of Marlin 2.x)\n' + gcode += linenumber() + '(#define ARC_SUPPORT)\n' + gcode += linenumber() + '(#define CNC_COORDINATE_SYSTEMS)\n' + gcode += linenumber() + '(#define PAREN_COMMENTS)\n' + gcode += linenumber() + '(#define GCODE_MOTION_MODES)\n' + gcode += linenumber() + '(#define G0_FEEDRATE)\n' + gcode += linenumber() + '(define VARIABLE_G0_FEEDRATE)\n' + + # Show the gcode result dialog: + if FreeCAD.GuiUp and SHOW_EDITOR: + dia = PostUtils.GCodeEditorDialog() + dia.editor.setText(gcode) + result = dia.exec_() + if result: + final = dia.editor.toPlainText() + else: + final = gcode else: - ref_Z = '' - ref_Y = ' Y' + RETURN_TO[first_comma + 1:].strip() + final = gcode - gcode += linenumber() + "G0" + ref_X + ref_Y + ref_Z + '\n' + print('Done postprocessing.') - # Show the gcode result dialog: - if FreeCAD.GuiUp and SHOW_EDITOR: - dia = PostUtils.GCodeEditorDialog() - dia.editor.setText(gcode) - result = dia.exec_() - if result: - final = dia.editor.toPlainText() - else: - final = gcode - else: - final = gcode - - print("Done postprocessing.") - - # Write the file: - try: - gfile = pythonopen(filename, "w") - gfile.write(final) - except Exception as e: - print('Error in writing the gcode file:\n', e.args) - finally: - gfile.close() + # Write the file: + with open(filename, 'w') as fp: + fp.write(final) def linenumber(): - if not OUTPUT_LINE_NUMBERS: - return "" - global LINENR - global LINEINCR - s = "N" + str(LINENR) + " " - LINENR += LINEINCR - return s + if not OUTPUT_LINE_NUMBERS: + return '' + global LINENR + global LINEINCR + LINENR += LINEINCR + return 'N' + str(LINENR) + ' ' -def format_outstring(strTable): - global COMMAND_SPACE - # construct the line for the final output - s = "" - for w in strTable: - s += w + COMMAND_SPACE - s = s.strip() - return s +def format_outlist(strTable): + # construct the line for the final output + global COMMAND_SPACE + s = '' + for w in strTable: + s += w + COMMAND_SPACE + return s.strip() def parse(pathobj): + global DRILL_RETRACT_MODE + global MOTION_MODE + global CURRENT_X + global CURRENT_Y + global CURRENT_Z - global DRILL_RETRACT_MODE - global MOTION_MODE - global CURRENT_X - global CURRENT_Y - global CURRENT_Z + out = '' + lastcommand = None + precision_string = '.' + str(PRECISION) + 'f' - out = "" - lastcommand = None - precision_string = '.' + str(PRECISION) + 'f' + params = ['X', 'Y', 'Z', 'A', 'B', 'C', 'U', 'V', 'W', 'I', 'J', 'K', 'F', + 'S', 'T', 'Q', 'R', 'L', 'P'] - params = ['X', 'Y', 'Z', 'A', 'B', 'C', 'U', 'V', 'W', 'I', 'J', 'K', 'F', 'S', 'T', 'Q', 'R', 'L', 'P'] + if hasattr(pathobj, 'Group'): # We have a compound or project. + if OUTPUT_COMMENTS: + out += linenumber() + '(Compound: ' + pathobj.Label + ')\n' + for p in pathobj.Group: + out += parse(p) + return out + + else: # Parsing simple path + # groups might contain non-path things like stock. + if not hasattr(pathobj, 'Path'): + return out + + if OUTPUT_COMMENTS and OUTPUT_PATH: + out += linenumber() + '(Path: ' + pathobj.Label + ')\n' + + for c in pathobj.Path.Commands: + outlist = [] + command = c.Name + outlist.append(command) + # Debug: + # print('pathobj.Path.Commands:', c) + + # If modal is True, delete duplicate commands: + if MODAL: + if command == lastcommand: + outlist.pop(0) + + # Add the remaining parameters in order: + for param in params: + if param in c.Parameters: + if param == 'F': + if command not in RAPID_MOVES: + feedRate = Units.Quantity( + c.Parameters['F'], FreeCAD.Units.Velocity) + if feedRate.getValueAs(UNIT_FEED_FORMAT) > 0.0: + outlist.append(param + format(float( + feedRate.getValueAs(UNIT_FEED_FORMAT)), + precision_string)) + elif param in ['T', 'H', 'D', 'S', 'P', 'L']: + outlist.append(param + str(c.Parameters[param])) + elif param in ['A', 'B', 'C']: + outlist.append(param + format( + c.Parameters[param], precision_string)) + # [X, Y, Z, U, V, W, I, J, K, R, Q] + else: + pos = Units.Quantity( + c.Parameters[param], FreeCAD.Units.Length) + outlist.append(param + format(float( + pos.getValueAs(UNIT_FORMAT)), precision_string)) + + # Store the latest command: + lastcommand = command + + # Capture the current position for subsequent calculations: + if command in MOTION_COMMANDS: + if 'X' in c.Parameters: + CURRENT_X = Units.Quantity( + c.Parameters['X'], FreeCAD.Units.Length) + if 'Y' in c.Parameters: + CURRENT_Y = Units.Quantity( + c.Parameters['Y'], FreeCAD.Units.Length) + if 'Z' in c.Parameters: + CURRENT_Z = Units.Quantity( + c.Parameters['Z'], FreeCAD.Units.Length) + + if command in ('G98', 'G99'): + DRILL_RETRACT_MODE = command + + if TRANSLATE_DRILL_CYCLES: + if command in ('G81', 'G82', 'G83'): + out += drill_translate(outlist, command, c.Parameters) + # Erase the line just translated: + outlist = [] + + if SPINDLE_WAIT > 0: + if command in ('M3', 'M03', 'M4', 'M04'): + out += linenumber() + format_outlist(outlist) + '\n' + # Marlin: P for milliseconds, S for seconds, change P to S + out += linenumber() + out += format_outlist(['G4', 'S%s' % SPINDLE_WAIT]) + out += '\n' + outlist = [] + + # Check for Tool Change: + if command in ('M6', 'M06'): + if OUTPUT_COMMENTS: + out += linenumber() + '(Begin toolchange)\n' + if OUTPUT_TOOL_CHANGE: + for line in TOOL_CHANGE.splitlines(True): + out += linenumber() + line + if not OUTPUT_TOOL_CHANGE and OUTPUT_COMMENTS: + outlist[0] = '(' + outlist[0] + outlist[-1] = outlist[-1] + ')' + if not OUTPUT_TOOL_CHANGE and not OUTPUT_COMMENTS: + outlist = [] + + if command == 'message': + if OUTPUT_COMMENTS: + outlist.pop(0) # remove the command + else: + out = [] + + if command in SUPPRESS_COMMANDS: + outlist[0] = '(' + outlist[0] + outlist[-1] = outlist[-1] + ')' + + # Remove embedded comments: + if not OUTPUT_COMMENTS: + tmplist = [] + list_index = 0 + while list_index < len(outlist): + left_index = outlist[list_index].find('(') + if left_index == -1: # Not a comment + tmplist.append(outlist[list_index]) + else: # This line contains a comment, and possibly more + right_index = outlist[list_index].find(')') + comment_area = outlist[list_index][ + left_index: right_index + 1] + line_minus_comment = outlist[list_index].replace( + comment_area, '').strip() + if line_minus_comment: + # Line contained more than just a comment + tmplist.append(line_minus_comment) + list_index += 1 + # Done removing comments + outlist = tmplist + + # Prepend a line number and append a newline + if len(outlist) >= 1: + out += linenumber() + format_outlist(outlist) + '\n' - if hasattr(pathobj, "Group"): # We have a compound or project. - if OUTPUT_COMMENTS: - out += linenumber() + "(Compound: " + pathobj.Label + ")\n" - for p in pathobj.Group: - out += parse(p) return out - else: # Parsing simple path - if not hasattr(pathobj, "Path"): # groups might contain non-path things like stock. - return out - if OUTPUT_COMMENTS and OUTPUT_PATH: - out += linenumber() + "(Path: " + pathobj.Label + ")\n" +# ***************************************************************************** +# * As of Marlin 2.0.7.bugfix, canned drill cycles do not exist. * +# * The following code converts FreeCAD's canned drill cycles into * +# * gcode that Marlin can use. * +# ***************************************************************************** +def drill_translate(outlist, cmd, params): + global DRILL_RETRACT_MODE + global MOTION_MODE + global CURRENT_X + global CURRENT_Y + global CURRENT_Z + global UNITS + global UNIT_FORMAT + global UNIT_FEED_FORMAT - for c in pathobj.Path.Commands: - outstring = [] - command = c.Name - outstring.append(command) - # Debug: - # print('pathobj.Path.Commands:', c) + class Drill: # Using a class is necessary for the nested functions. + gcode = '' - # If modal is True, delete duplicate commands: - if MODAL: - if command == lastcommand: - outstring.pop(0) + strFormat = '.' + str(PRECISION) + 'f' - # Add the remaining parameters in order: - for param in params: - if param in c.Parameters: - if param == 'F': - if command not in RAPID_MOVES: - feedRate = Units.Quantity(c.Parameters['F'], FreeCAD.Units.Velocity) - if feedRate.getValueAs(UNIT_FEED_FORMAT) > 0.0: - outstring.append(param + format(float(feedRate.getValueAs(UNIT_FEED_FORMAT)), precision_string)) - elif param in ['T', 'H', 'D', 'S', 'P', 'L']: - outstring.append(param + str(c.Parameters[param])) - elif param in ['A', 'B', 'C']: - outstring.append(param + format(c.Parameters[param], precision_string)) - else: # [X, Y, Z, U, V, W, I, J, K, R, Q] (Possible conversion mm/inches) - pos = Units.Quantity(c.Parameters[param], FreeCAD.Units.Length) - outstring.append(param + format(float(pos.getValueAs(UNIT_FORMAT)), precision_string)) + if OUTPUT_COMMENTS: # Comment the original command + outlist[0] = '(' + outlist[0] + outlist[-1] = outlist[-1] + ')' + Drill.gcode += linenumber() + format_outlist(outlist) + '\n' - # Store the latest command: - lastcommand = command + # Cycle conversion only converts the cycles in the XY plane (G17). + # --> ZX (G18) and YZ (G19) planes produce false gcode. + drill_X = Units.Quantity(params['X'], FreeCAD.Units.Length) + drill_Y = Units.Quantity(params['Y'], FreeCAD.Units.Length) + drill_Z = Units.Quantity(params['Z'], FreeCAD.Units.Length) + drill_R = Units.Quantity(params['R'], FreeCAD.Units.Length) + drill_F = Units.Quantity(params['F'], FreeCAD.Units.Velocity) + if cmd == 'G82': + drill_DwellTime = params['P'] + elif cmd == 'G83': + drill_Step = Units.Quantity(params['Q'], FreeCAD.Units.Length) - # Capture the current position for calculating the related movements: - if command in MOTION_COMMANDS: - if 'X' in c.Parameters: - CURRENT_X = Units.Quantity(c.Parameters['X'], FreeCAD.Units.Length) - if 'Y' in c.Parameters: - CURRENT_Y = Units.Quantity(c.Parameters['Y'], FreeCAD.Units.Length) - if 'Z' in c.Parameters: - CURRENT_Z = Units.Quantity(c.Parameters['Z'], FreeCAD.Units.Length) + # R less than Z is error + if drill_R < drill_Z: + Drill.gcode += linenumber() + '(drill cycle error: R less than Z )\n' + return Drill.gcode - if command in ('G98', 'G99'): - DRILL_RETRACT_MODE = command + # Z height to retract to when drill cycle is done: + if DRILL_RETRACT_MODE == 'G98' and CURRENT_Z > drill_R: + RETRACT_Z = CURRENT_Z + else: + RETRACT_Z = drill_R - if TRANSLATE_DRILL_CYCLES: - if command in ('G81', 'G82', 'G83'): - out += drill_translate(outstring, command, c.Parameters) - # Erase the line we just translated - outstring = [] + # Z motion nested functions: + def rapid_Z_to(new_Z): + Drill.gcode += linenumber() + 'G0 Z' + Drill.gcode += format( + float(new_Z.getValueAs(UNIT_FORMAT)), strFormat) + '\n' - if SPINDLE_WAIT > 0: - if command in ('M3', 'M03', 'M4', 'M04'): - out += linenumber() + format_outstring(outstring) + "\n" - # Note: Marlin uses P for milliseconds, S for seconds. Change P to S. - out += linenumber() + format_outstring(['G4', 'S%s' % SPINDLE_WAIT]) + "\n" - outstring = [] + def feed_Z_to(new_Z): + Drill.gcode += linenumber() + 'G1 Z' + Drill.gcode += format( + float(new_Z.getValueAs(UNIT_FORMAT)), strFormat) + ' F' + Drill.gcode += format( + float(drill_F.getValueAs(UNIT_FEED_FORMAT)), '.2f') + '\n' - # Check for Tool Change: - if command in ('M6', 'M06'): - if OUTPUT_COMMENTS: - out += linenumber() + "(Begin toolchange)\n" - if not OUTPUT_TOOL_CHANGE: - outstring[0] = "(" + outstring[0] - outstring[-1] = outstring[-1] + ")" - else: - for line in TOOL_CHANGE.splitlines(True): - out += linenumber() + line + # Make sure that Z is not below RETRACT_Z: + if CURRENT_Z < RETRACT_Z: + rapid_Z_to(RETRACT_Z) - if command == "message": - if OUTPUT_COMMENTS is False: - out = [] - else: - outstring.pop(0) # remove the command + # Rapid to hole position XY: + Drill.gcode += linenumber() + 'G0 X' + Drill.gcode += format( + float(drill_X.getValueAs(UNIT_FORMAT)), strFormat) + ' Y' + Drill.gcode += format( + float(drill_Y.getValueAs(UNIT_FORMAT)), strFormat) + '\n' - if command in SUPPRESS_COMMANDS: - outstring[0] = "(" + outstring[0] - outstring[-1] = outstring[-1] + ")" + # Rapid to R: + rapid_Z_to(drill_R) - # Prepend a line number and append a newline - if len(outstring) >= 1: - out += linenumber() + format_outstring(outstring) + "\n" + # ************************************************************************* + # * Drill cycles: * + # * G80 Cancel the drill cycle * + # * G81 Drill full depth in one pass * + # * G82 Drill full depth in one pass, and pause at the bottom * + # * G83 Drill in pecks, raising the drill to R height after each peck * + # * In preparation for a rapid to the next hole position: * + # * G98 After the hole has been drilled, retract to the initial Z value * + # * G99 After the hole has been drilled, retract to R height * + # * Select G99 only if safe to move from hole to hole at the R height * + # ************************************************************************* + if cmd in ('G81', 'G82'): + feed_Z_to(drill_Z) # Drill hole in one step + if cmd == 'G82': # Dwell time delay at the bottom of the hole + Drill.gcode += linenumber() + 'G4 S' + str(drill_DwellTime) + '\n' + # Marlin uses P for milliseconds, S for seconds, change P to S - return out + elif cmd == 'G83': # Peck drill cycle: + chip_Space = drill_Step * 0.5 + next_Stop_Z = drill_R - drill_Step + while next_Stop_Z >= drill_Z: + feed_Z_to(next_Stop_Z) # Drill one peck of depth + # Set next depth, next_Stop_Z is still at the current hole depth + if (next_Stop_Z - drill_Step) >= drill_Z: + # Rapid up to clear chips: + rapid_Z_to(drill_R) + # Rapid down to just above last peck depth: + rapid_Z_to(next_Stop_Z + chip_Space) + # Update next_Stop_Z to next depth: + next_Stop_Z -= drill_Step + elif next_Stop_Z == drill_Z: + break # Done + else: # More to drill, but less than drill_Step + # Rapid up to clear chips: + rapid_Z_to(drill_R) + # Rapid down to just above last peck depth: + rapid_Z_to(next_Stop_Z + chip_Space) + # Dril remainder of the hole depth: + feed_Z_to(drill_Z) + break # Done + rapid_Z_to(RETRACT_Z) # Done, retract the drill -''' As of Marlin 2.0.7.bugfix, canned drill cycles do not exist. - The following code converts FreeCAD's canned drill cycles into - gcode that Marlin can use. -''' -def drill_translate(outstring, cmd, params): - global DRILL_RETRACT_MODE - global MOTION_MODE - global CURRENT_X - global CURRENT_Y - global CURRENT_Z - global UNITS - global UNIT_FORMAT - global UNIT_FEED_FORMAT - - class Drill: # Using a class is necessary for the nested functions - gcode = '' - - strFormat = '.' + str(PRECISION) + 'f' - - if OUTPUT_COMMENTS: # Comment the original command - outstring[0] = "(" + outstring[0] - outstring[-1] = outstring[-1] + ")" - Drill.gcode += linenumber() + format_outstring(outstring) + "\n" - - # Cycle conversion only converts the cycles in the XY plane (G17). - # --> ZX (G18) and YZ (G19) planes produce false gcode. - drill_X = Units.Quantity(params['X'], FreeCAD.Units.Length) - drill_Y = Units.Quantity(params['Y'], FreeCAD.Units.Length) - drill_Z = Units.Quantity(params['Z'], FreeCAD.Units.Length) - drill_R = Units.Quantity(params['R'], FreeCAD.Units.Length) - drill_F = Units.Quantity(params['F'], FreeCAD.Units.Velocity) - if cmd == 'G82': - drill_DwellTime = params['P'] - elif cmd == 'G83': - drill_Step = Units.Quantity(params['Q'], FreeCAD.Units.Length) - - # R less than Z is error - if drill_R < drill_Z : - Drill.gcode += linenumber() + "(drill cycle error: R less than Z )\n" return Drill.gcode - # Z height to retract to when drill cycle is done: - if DRILL_RETRACT_MODE == 'G98' and CURRENT_Z > drill_R: - RETRACT_Z = CURRENT_Z - else: - RETRACT_Z = drill_R - # Z motion nested functions: - def rapid_Z_to(new_Z): - Drill.gcode += linenumber() + 'G0 Z' + format(float(new_Z.getValueAs(UNIT_FORMAT)), strFormat) + "\n" +print(__name__ + ': GCode postprocessor loaded.') - def feed_Z_to(new_Z): - Drill.gcode += linenumber() + 'G1 Z' + format(float(new_Z.getValueAs(UNIT_FORMAT)), strFormat) + ' F' + format(float(drill_F.getValueAs(UNIT_FEED_FORMAT)), '.2f') + "\n" - - # Make sure that Z is not below RETRACT_z: - if CURRENT_Z < RETRACT_Z: - rapid_Z_to(RETRACT_Z) - - # Rapid to hole position XY: - Drill.gcode += linenumber() + 'G0 X' + format(float(drill_X.getValueAs(UNIT_FORMAT)), strFormat) + ' Y' + format(float(drill_Y.getValueAs(UNIT_FORMAT)), strFormat) + "\n" - - # Rapid to R: - rapid_Z_to(drill_R) - - """ Drill cycles: - G80 Cancel the drill cycle. - G81 Drill full depth in one pass. - G82 Drill full depth in one pass, and pause at the bottom. - G83 Drill in small pecks (steps), raising the drill to R height after each peck. - In preparation for a rapid to the next hole position: - G98 After the hole has been drilled, retract to the initial Z value as the clearance height. - G99 After the hole has been drilled, retract to R height. G99 should only be selected if it is safe to move from hole to hole at the R height. - """ - if cmd in ('G81', 'G82'): - feed_Z_to(drill_Z) # Drill hole in one step - if cmd == 'G82': # Dwell time delay at the bottom of the hole - Drill.gcode += linenumber() + 'G4 S' + str(drill_DwellTime) + "\n" - # Note: Marlin uses P for milliseconds, S for seconds. Change P to S. - - elif cmd == 'G83': # Peck drill cycle: - chip_Space = drill_Step * 0.5 - next_Stop_Z = drill_R - drill_Step - while next_Stop_Z >= drill_Z: - feed_Z_to(next_Stop_Z) # Drill one peck depth - - # Set the next depth, next_Stop_Z is still at the current hole depth - if (next_Stop_Z - drill_Step) >= drill_Z: - rapid_Z_to(drill_R) # Rapid up to clear chips - rapid_Z_to(next_Stop_Z + chip_Space) # Rapid down above last peck depth - next_Stop_Z -= drill_Step # Update next_Stop_Z to the next depth - elif next_Stop_Z == drill_Z: - break # Done - else: # More to drill, but less than drill_Step - rapid_Z_to(drill_R) # Rapid up to clear chips - rapid_Z_to(next_Stop_Z + chip_Space) # Rapid down above last peck depth - feed_Z_to(drill_Z) # Dril remainder of the hole depth - break # Done - rapid_Z_to(RETRACT_Z) # Done, retract the drill - - return Drill.gcode - - -print(__name__ + ": GCode postprocessor loaded.") +# PEP8 format passed using: http://pep8online.com/, which primarily covers +# indentation and line length. Some other aspects of PEP8 which have not +# been applied yet may be applied in future updates.