diff --git a/src/Mod/Part/App/ShapeFix/ShapeFix_EdgePy.xml b/src/Mod/Part/App/ShapeFix/ShapeFix_EdgePy.xml
index 69d3ec4f7b..f2899e35fc 100644
--- a/src/Mod/Part/App/ShapeFix/ShapeFix_EdgePy.xml
+++ b/src/Mod/Part/App/ShapeFix/ShapeFix_EdgePy.xml
@@ -18,119 +18,37 @@
     </Documentation>
     <Methode Name="fixRemovePCurve">
       <Documentation>
-        <UserDocu> Removes the pcurve(s) of the edge if it does not match the
-   vertices
-   Check is done
-   Use    : It is to be called when pcurve of an edge can be wrong
-   (e.g., after import from IGES)
-   Returns: True, if does not match, removed (status DONE)
-   False, (status OK) if matches or (status FAIL) if no pcurve,
-   nothing done</UserDocu>
+        <UserDocu>Removes pcurve(s) if not matching vertices.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixRemoveCurve3d">
       <Documentation>
-        <UserDocu>Removes 3d curve of the edge if it does not match the vertices
-   Returns: True,  if does not match, removed (status DONE)
-   False, (status OK) if matches or (status FAIL) if no 3d curve,
-   nothing done
-</UserDocu>
+        <UserDocu>Removes 3d curve if not matching vertices.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixAddPCurve">
       <Documentation>
-        <UserDocu> Adds pcurve(s) of the edge if missing (by projecting 3d curve)
-   Parameter isSeam indicates if the edge is a seam.
-   The parameter 'prec' defines the precision for calculations.
-   If it is 0 (default), the tolerance of the edge is taken.
-   Remark : This method is rather for internal use since it accepts parameter
-   'surfana' for optimization of computations
-   Use    : It is to be called after FixRemovePCurve (if removed) or in any
-   case when edge can have no pcurve
-   Returns: True if pcurve was added, else False
-   Status :
-   OK   : Pcurve exists
-   FAIL1: No 3d curve
-   FAIL2: fail during projecting
-   DONE1: Pcurve was added
-   DONE2: specific case of pcurve going through degenerated point on
-   sphere encountered during projection (see class
-   ShapeConstruct_ProjectCurveOnSurface for more info)</UserDocu>
+        <UserDocu>Adds missing pcurve(s) by projecting 3d curve.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixAddCurve3d">
       <Documentation>
-        <UserDocu>Tries to build 3d curve of the edge if missing
-   Use    : It is to be called after FixRemoveCurve3d (if removed) or in any
-   case when edge can have no 3d curve
-   Returns: True if 3d curve was added, else False
-   Status :
-   OK   : 3d curve exists
-   FAIL1: BRepLib::BuildCurve3d() has failed
-   DONE1: 3d curve was added</UserDocu>
+        <UserDocu>Tries to build missing 3d curve.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixVertexTolerance">
       <Documentation>
-        <UserDocu> Increases the tolerances of the edge vertices to comprise
-   the ends of 3d curve and pcurve on the given face
-   (first method) or all pcurves stored in an edge (second one)
-   Returns: True, if tolerances have been increased, otherwise False
-   Status:
-   OK   : the original tolerances have not been changed
-   DONE1: the tolerance of first vertex has been increased
-   DONE2: the tolerance of last  vertex has been increased</UserDocu>
+        <UserDocu>Increases tolerances of edge vertices.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixReversed2d">
       <Documentation>
-        <UserDocu> Fixes edge if pcurve is directed opposite to 3d curve
-   Check is done by call to the function
-   ShapeAnalysis_Edge::CheckCurve3dWithPCurve()
-   Warning: For seam edge this method will check and fix the pcurve in only
-   one direction. Hence, it should be called twice for seam edge:
-   once with edge orientation FORWARD and once with REVERSED.
-   Returns: False if nothing done, True if reversed (status DONE)
-   Status:  OK    - pcurve OK, nothing done
-   FAIL1 - no pcurve
-   FAIL2 - no 3d curve
-   DONE1 - pcurve was reversed</UserDocu>
+        <UserDocu>Fixes edge if pcurve is opposite to 3d curve.</UserDocu>
       </Documentation>
     </Methode>
     <Methode Name="fixSameParameter">
       <Documentation>
-        <UserDocu>Tries to make edge SameParameter and sets corresponding
-   tolerance and SameParameter flag.
-   First, it makes edge same range if SameRange flag is not set.
-   If flag SameParameter is set, this method calls the
-   function ShapeAnalysis_Edge::CheckSameParameter() that
-   calculates the maximal deviation of pcurves of the edge from
-   its 3d curve. If deviation &gt; tolerance, the tolerance of edge
-   is increased to a value of deviation. If deviation &lt; tolerance
-   nothing happens.
-  
-   If flag SameParameter is not set, this method chooses the best
-   variant (one that has minimal tolerance), either
-   a. only after computing deviation (as above) or
-   b. after calling standard procedure BRepLib::SameParameter
-   and computing deviation (as above). If 'tolerance' &gt; 0, it is
-   used as parameter for BRepLib::SameParameter, otherwise,
-   tolerance of the edge is used.
-  
-   Use    : Is to be called after all pcurves and 3d curve of the edge are
-   correctly computed
-   Remark : SameParameter flag is always set to True after this method
-   Returns: True, if something done, else False
-   Status : OK    - edge was initially SameParameter, nothing is done
-   FAIL1 - computation of deviation of pcurves from 3d curve has failed
-   FAIL2 - BRepLib::SameParameter() has failed
-   DONE1 - tolerance of the edge was increased
-   DONE2 - flag SameParameter was set to True (only if
-   BRepLib::SameParameter() did not set it)
-   DONE3 - edge was modified by BRepLib::SameParameter() to SameParameter
-   DONE4 - not used anymore
-   DONE5 - if the edge resulting from BRepLib has been chosen, i.e. variant b. above
-   (only for edges with not set SameParameter)</UserDocu>
+        <UserDocu>Makes edge SameParameter and sets tolerance.</UserDocu>
       </Documentation>
     </Methode>
     <ClassDeclarations>