diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 580dba429e..60210ece33 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -83,11 +83,11 @@ - Base + Enum - Enum + Base @@ -178,6 +178,10 @@ Transform + + Toggle array elements + + Link Transform @@ -186,10 +190,6 @@ Measure distance - - Toggle array elements - - CommandGroup @@ -260,6 +260,10 @@ Spaceball Motion + + Global Sensitivity: + + Dominant Mode @@ -292,10 +296,6 @@ Reverse - - Global Sensitivity: - - DlgExpressionInput @@ -307,10 +307,6 @@ Result: - - Ok - - &Clear @@ -319,6 +315,10 @@ Revert to last calculated value (as constant) + + Ok + + DownloadItem @@ -518,30 +518,18 @@ while doing a left or right click and move the mouse up or down About - - Revision number - - Version - OK - - - - + Revision number Release date - - Copy to clipboard - - Operating system @@ -550,29 +538,25 @@ while doing a left or right click and move the mouse up or down Word size + + Copy to clipboard + + License + + OK + + + + + + Gui::Dialog::AboutDialog - - Libraries - - - - This software uses open source components whose copyright and other proprietary rights belong to their respective owners: - - - - License - - - - Collection - - Credits Header for the Credits tab of the About screen @@ -592,6 +576,22 @@ while doing a left or right click and move the mouse up or down Header for the list of companies/organizations in the Credits list. + + License + + + + Libraries + + + + This software uses open source components whose copyright and other proprietary rights belong to their respective owners: + + + + Collection + + Gui::Dialog::ApplicationCache @@ -614,14 +614,6 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::ButtonModel - - Button %1 - - - - Out Of Range - - " @@ -630,6 +622,14 @@ while doing a left or right click and move the mouse up or down " + + Button %1 + + + + Out Of Range + + Gui::Dialog::CameraDialog @@ -673,11 +673,11 @@ while doing a left or right click and move the mouse up or down - Flip + Offset - Offset + Flip @@ -718,16 +718,28 @@ while doing a left or right click and move the mouse up or down View Turntable + + Angle + + + + -90° + + + + 90° + + Speed - Maximum + Minimum - Minimum + Maximum @@ -742,28 +754,16 @@ while doing a left or right click and move the mouse up or down s - - Angle - - - - 90° - - - - -90° - - Play - Stop + Close - Close + Stop @@ -835,11 +835,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Password: + Site: - + %1 at %2 @@ -847,11 +847,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Site: + Password: - %1 at %2 + @@ -922,23 +922,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces - ... - - - - Pixmap - - - - Accelerator: - - - - What's this: - - - - Status text: + Menu text: @@ -946,7 +930,23 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Menu text: + Status text: + + + + What's this: + + + + Accelerator: + + + + Pixmap + + + + ... @@ -1037,10 +1037,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces Keyboard - - Description: - - &Category: @@ -1069,6 +1065,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Alt+A + + Clear + + &Reset @@ -1086,11 +1086,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces - + Description: - Clear + @@ -1113,11 +1113,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Already defined shortcut + The shortcut '%1' is defined more than once. This could result in unexpected behaviour. - The shortcut '%1' is defined more than once. This could result in unexpected behaviour. + Already defined shortcut @@ -1143,7 +1143,15 @@ If this is not ticked, then the property must be uniquely named, and it is acces - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + New... + + + + Rename... + + + + Delete @@ -1162,14 +1170,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> - - Move down - - - - <b>Move the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - - Move up @@ -1179,15 +1179,19 @@ If this is not ticked, then the property must be uniquely named, and it is acces - New... + Move down - Rename... + <b>Move the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - Delete + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + + + + Global @@ -1202,6 +1206,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces <Separator> + + %1 module not loaded + + New toolbar @@ -1226,14 +1234,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces - - Global - - - - %1 module not loaded - - Gui::Dialog::DlgCustomizeImp @@ -1263,6 +1263,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Gui::Dialog::DlgCustomizeSpaceball + + Spaceball Buttons + + No Spaceball Present @@ -1271,18 +1275,14 @@ If this is not ticked, then the property must be uniquely named, and it is acces Buttons - - Print Reference - - - - Spaceball Buttons - - Reset + + Print Reference + + Gui::Dialog::DlgDisplayProperties @@ -1291,19 +1291,15 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Display + Viewing mode - Transparency: + Document window: - Line width: - - - - Point size: + Plot mode: @@ -1315,23 +1311,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Viewing mode - - - - Plot mode: - - - - - - - - Line transparency: - - - - Line color: + Color plot: @@ -1339,11 +1319,31 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Color plot: + Line color: - Document window: + Display + + + + Point size: + + + + Line width: + + + + Transparency: + + + + Line transparency: + + + + @@ -1448,10 +1448,22 @@ If this is not ticked, then the property must be uniquely named, and it is acces Options + + Code lines will be numbered + + Enable line numbers + + The cursor shape will be a block + + + + Enable block cursor + + Enable folding @@ -1460,46 +1472,18 @@ If this is not ticked, then the property must be uniquely named, and it is acces Indentation - - Insert spaces - - Tab size: - - Indent size: - - - - Keep tabs - - - - Family: - - - - Size: - - - - Preview: - - - - - - - - Pressing <Tab> will insert amount of defined indent size - - Tabulator raster (how many spaces) + + Indent size: + + How many spaces will be inserted when pressing <Tab> @@ -1509,35 +1493,51 @@ If this is not ticked, then the property must be uniquely named, and it is acces - Display items + Keep tabs - Font size to be used for selected code type + Pressing <Tab> will insert amount of defined indent size + + + + Insert spaces + + + + Display items Color and font settings will be applied to selected type + + Family: + + Font family to be used for selected code type + + Size: + + + + Font size to be used for selected code type + + Color: - Code lines will be numbered + Preview: - The cursor shape will be a block - - - - Enable block cursor + @@ -1547,18 +1547,6 @@ If this is not ticked, then the property must be uniquely named, and it is acces General - - Start up - - - - Enable splash screen at start up - - - - Auto load module after start up: - - Language @@ -1567,71 +1555,10 @@ If this is not ticked, then the property must be uniquely named, and it is acces Change language: - - Main window - - - - Size of recent file list - - - - Size of toolbar icons: - - - - Enable tiled background - - - - Style sheet: - - Language of the application's user interface - - How many files should be listed in recent files list - - - - Background of the main window will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. - - - - Style sheet how user interface will look like - - - - Choose your preference for toolbar icon size. You can adjust -this according to your screen size or personal taste - - - - Tree view mode: - - - - Customize how tree view is shown in the panel (restart required). - -'ComboView': combine tree view and property view into one panel. -'TreeView and PropertyView': split tree view and property view into separate panel. -'Both': keep all three panels, and you can have two sets of tree view and property view. - - - - A Splash screen is a small loading window that is shown -when FreeCAD is launching. If this option is checked, FreeCAD will -display the splash screen - - - - Choose which workbench will be activated and shown -after FreeCAD launches - - Number format: @@ -1684,6 +1611,27 @@ after FreeCAD launches Revert... + + Main window + + + + Size of recent file list + + + + How many files should be listed in recent files list + + + + Background of the main window will consist of tiles of a special image. +See the FreeCAD Wiki for details about the image. + + + + Enable tiled background + + The text cursor will be blinking @@ -1692,11 +1640,63 @@ after FreeCAD launches Enable cursor blinking + + Style sheet: + + + + Style sheet how user interface will look like + + + + Size of toolbar icons: + + + + Choose your preference for toolbar icon size. You can adjust +this according to your screen size or personal taste + + + + Tree view mode: + + + + Customize how tree view is shown in the panel (restart required). + +'ComboView': combine tree view and property view into one panel. +'TreeView and PropertyView': split tree view and property view into separate panel. +'Both': keep all three panels, and you can have two sets of tree view and property view. + + + + Start up + + + + Auto load module after start up: + + + + Choose which workbench will be activated and shown +after FreeCAD launches + + + + A Splash screen is a small loading window that is shown +when FreeCAD is launching. If this option is checked, FreeCAD will +display the splash screen + + + + Enable splash screen at start up + + Gui::Dialog::DlgGeneralImp - No style sheet + Manage preference packs @@ -1732,7 +1732,7 @@ after FreeCAD launches - Manage preference packs + No style sheet @@ -1780,6 +1780,14 @@ after FreeCAD launches Macro name: + + User macros + + + + System macros + + Execute @@ -1800,18 +1808,6 @@ after FreeCAD launches Edit - - User macros - - - - System macros - - - - User macros location: - - Rename @@ -1821,11 +1817,11 @@ after FreeCAD launches - Toolbar + Launch a guide on how to set up a macro in a custom global toolbar. - Launch a guide on how to set up a macro in a custom global toolbar. + Toolbar @@ -1836,6 +1832,10 @@ after FreeCAD launches Download + + User macros location: + + Gui::Dialog::DlgMacroExecuteImp @@ -1843,6 +1843,10 @@ after FreeCAD launches Macros + + Read-only + + Macro file @@ -1860,14 +1864,6 @@ after FreeCAD launches This file already exists. - - Delete macro - - - - Do you really want to delete the macro '%1'? - - Cannot create file @@ -1877,42 +1873,11 @@ This file already exists. - Read-only + Delete macro - Renaming Macro File - - - - Enter new name: - - - - '%1' - already exists. - - - - Rename Failed - - - - Failed to rename to '%1'. -Perhaps a file permission error? - - - - Duplicate Macro - - - - Duplicate Failed - - - - Failed to duplicate to '%1'. -Perhaps a file permission error? + Do you really want to delete the macro '%1'? @@ -1954,6 +1919,41 @@ Note: your changes will be applied when you next switch workbenches Walkthrough instructions: Click New, then right arrow (->) button, then Close. + + Renaming Macro File + + + + Enter new name: + + + + '%1' + already exists. + + + + Rename Failed + + + + Failed to rename to '%1'. +Perhaps a file permission error? + + + + Duplicate Macro + + + + Duplicate Failed + + + + Failed to duplicate to '%1'. +Perhaps a file permission error? + + Gui::Dialog::DlgMacroRecord @@ -1965,14 +1965,6 @@ Note: your changes will be applied when you next switch workbenches Macro name: - - Stop - - - - Cancel - - Macro path: @@ -1985,6 +1977,14 @@ Note: your changes will be applied when you next switch workbenches Record + + Stop + + + + Cancel + + Gui::Dialog::DlgMacroRecordImp @@ -1996,6 +1996,10 @@ Note: your changes will be applied when you next switch workbenches Specify first a place to save. + + The macro directory doesn't exist. Please, choose another one. + + Existing macro @@ -2005,17 +2009,13 @@ Note: your changes will be applied when you next switch workbenches - The macro directory doesn't exist. Please, choose another one. + You have no write permission for the directory. Please, choose another one. Choose macro directory - - You have no write permission for the directory. Please, choose another one. - - Gui::Dialog::DlgMaterialProperties @@ -2027,10 +2027,18 @@ Note: your changes will be applied when you next switch workbenches Material + + Ambient color: + + Diffuse color: + + Emissive color: + + Specular color: @@ -2043,18 +2051,10 @@ Note: your changes will be applied when you next switch workbenches % - - Ambient color: - - - - Emissive color: - - Gui::Dialog::DlgOnlineHelp @@ -2073,6 +2073,10 @@ Note: your changes will be applied when you next switch workbenches Gui::Dialog::DlgOnlineHelpImp + + HTML files + + Access denied @@ -2083,10 +2087,6 @@ Note: your changes will be applied when you next switch workbenches Specify another directory, please. - - HTML files - - Gui::Dialog::DlgParameter @@ -2094,22 +2094,6 @@ Specify another directory, please. Parameter Editor - - Save to disk - - - - Alt+C - - - - &Close - - - - Find... - - Sorted @@ -2126,6 +2110,22 @@ Specify another directory, please. Search Group + + Find... + + + + Save to disk + + + + Alt+C + + + + &Close + + Gui::Dialog::DlgParameterFind @@ -2188,10 +2188,18 @@ Specify another directory, please. Value + + System parameter + + User parameter + + Search Group + + Invalid input @@ -2200,14 +2208,6 @@ Specify another directory, please. Invalid key name '%1' - - System parameter - - - - Search Group - - Gui::Dialog::DlgPreferencePackManagement @@ -2264,10 +2264,6 @@ Specify another directory, please. Gui::Dialog::DlgPreferencesImp - - Wrong parameter - - Clear user settings @@ -2280,6 +2276,10 @@ Specify another directory, please. If you agree all your settings will be cleared. + + Wrong parameter + + Gui::Dialog::DlgProjectInformation @@ -2295,16 +2295,16 @@ Specify another directory, please. &Name: - - Commen&t: - - Path: - &Last modified by: + UUID: + + + + Program version: @@ -2312,7 +2312,11 @@ Specify another directory, please. - Com&pany: + Creation &date: + + + + &Last modified by: @@ -2320,15 +2324,7 @@ Specify another directory, please. - Creation &date: - - - - - - - - UUID: + Com&pany: @@ -2344,7 +2340,11 @@ Specify another directory, please. - Program version: + Commen&t: + + + + @@ -2382,6 +2382,10 @@ Specify another directory, please. Load project file after creation + + Project file + + Empty source @@ -2398,10 +2402,6 @@ Specify another directory, please. No destination is defined. - - Project file - - Gui::Dialog::DlgPropertyLink @@ -2409,6 +2409,18 @@ Specify another directory, please. Link + + Filter by type + + + + If enabled, then 3D view selection will be synchronized with full object hierarchy. + + + + Sync sub-object selection + + Search @@ -2417,14 +2429,6 @@ Specify another directory, please. A search pattern to filter the results above - - Filter by type - - - - Sync sub-object selection - - Reset @@ -2433,10 +2437,6 @@ Specify another directory, please. Clear - - If enabled, then 3D view selection will be synchronized with full object hierarchy. - - Gui::Dialog::DlgReportView @@ -2449,65 +2449,37 @@ Specify another directory, please. - Record log messages + Normal messages will be recorded - Record warnings - - - - Record error messages - - - - Colors - - - - Normal messages: - - - - Log messages: - - - - Warnings: - - - - Errors: - - - - - - - - Redirect internal Python errors to report view - - - - Redirect internal Python output to report view - - - - Python interpreter + Record normal messages Log messages will be recorded + + Record log messages + + Warnings will be recorded + + Record warnings + + Error messages will be recorded + + Record error messages + + When an error has occurred, the Report View dialog becomes visible on-screen while displaying the error @@ -2544,32 +2516,6 @@ on-screen while displaying the log message Show report view on log message - - Font color for normal messages in Report view panel - - - - Font color for log messages in Report view panel - - - - Font color for warning messages in Report view panel - - - - Font color for error messages in Report view panel - - - - Internal Python output will be redirected -from Python console to Report view panel - - - - Internal Python error messages will be redirected -from Python console to Report view panel - - Include a timecode for each report @@ -2579,11 +2525,65 @@ from Python console to Report view panel - Normal messages will be recorded + Colors - Record normal messages + Normal messages: + + + + Font color for normal messages in Report view panel + + + + Log messages: + + + + Font color for log messages in Report view panel + + + + Warnings: + + + + Font color for warning messages in Report view panel + + + + Errors: + + + + Font color for error messages in Report view panel + + + + Python interpreter + + + + Internal Python output will be redirected +from Python console to Report view panel + + + + Redirect internal Python output to report view + + + + Internal Python error messages will be redirected +from Python console to Report view panel + + + + Redirect internal Python errors to report view + + + + @@ -2654,58 +2654,6 @@ from Python console to Report view panel 3D View - - Show coordinate system in the corner - - - - Show counter of frames per second - - - - Camera type - - - - - - - - Anti-Aliasing - - - - None - - - - Line Smoothing - - - - MSAA 2x - - - - MSAA 4x - - - - MSAA 8x - - - - Or&thographic rendering - - - - Perspective renderin&g - - - - Marker size: - - General @@ -2715,11 +2663,41 @@ from Python console to Report view panel lower right corner within opened files + + Show coordinate system in the corner + + + + Relative size : + + + + Size of main coordinate system representation +in the corner -- in % of height/width of viewport + + + + % + + + + Axis cross will be shown by default at file +opening or creation + + + + Show axis cross by default + + Time needed for last operation and resulting frame rate will be shown at the lower left corner in opened files + + Show counter of frames per second + + If checked, application will remember which workbench is active for each tab of the viewport @@ -2732,6 +2710,16 @@ will be shown at the lower left corner in opened files Rendering + + This option is useful for troubleshooting graphics card and driver problems. + +Changing this option requires a restart of the application. + + + + Use software OpenGL + + If selected, Vertex Buffer Objects (VBO) will be used. A VBO is an OpenGL feature that provides methods for uploading @@ -2775,6 +2763,34 @@ but slower response to any scene changes. Centralized + + Anti-Aliasing + + + + What kind of multisample anti-aliasing is used + + + + None + + + + Line Smoothing + + + + MSAA 2x + + + + MSAA 4x + + + + MSAA 8x + + Transparent objects: @@ -2791,14 +2807,34 @@ but slower response to any scene changes. Backface pass + + Marker size: + + Size of vertices in the Sketcher workbench + + Pick radius (px): + + + + Area for picking elements in 3D view. +Larger value eases to pick things, but can make small features impossible to select. + + + Eye to eye distance for stereo modes + + Eye-to-eye distance used for stereo projections. +The specified value is a factor that will be multiplied with the +bounding box size of the 3D object that is currently displayed. + + Backlight is enabled with the defined color @@ -2816,7 +2852,7 @@ but slower response to any scene changes. - Objects will be projected in orthographic projection + Camera type @@ -2824,68 +2860,24 @@ but slower response to any scene changes. - Axis cross will be shown by default at file -opening or creation + Perspective renderin&g - Show axis cross by default + Objects will be projected in orthographic projection - Pick radius (px): + Or&thographic rendering - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - - - - - This option is useful for troubleshooting graphics card and driver problems. - -Changing this option requires a restart of the application. - - - - Use software OpenGL - - - - What kind of multisample anti-aliasing is used - - - - Eye-to-eye distance used for stereo projections. -The specified value is a factor that will be multiplied with the -bounding box size of the 3D object that is currently displayed. - - - - Relative size : - - - - Size of main coordinate system representation -in the corner -- in % of height/width of viewport - - - - % + Gui::Dialog::DlgSettings3DViewImp - - Anti-aliasing - - - - Open a new viewer or restart %1 to apply anti-aliasing changes. - - 5px @@ -2910,6 +2902,14 @@ in the corner -- in % of height/width of viewport 15px + + Anti-aliasing + + + + Open a new viewer or restart %1 to apply anti-aliasing changes. + + Gui::Dialog::DlgSettingsCacheDirectory @@ -2976,6 +2976,10 @@ in the corner -- in % of height/width of viewport Gui::Dialog::DlgSettingsColorGradient + + Color-gradient settings + + Color model @@ -3000,32 +3004,12 @@ in the corner -- in % of height/width of viewport black-white - - Visibility - - - - Out g&rayed - - - - Alt+R - - - - Alt+I - - Style - &Zero - - - - Alt+Z + Color gradient is used with its full color range @@ -3036,47 +3020,35 @@ in the corner -- in % of height/width of viewport Alt+F - - Parameter range - - - - Mi&nimum: - - - - Ma&ximum: - - - - &Labels: - - - - &Decimals: - - - - - - - - Color-gradient settings - - - - Color gradient is used with its full color range - - Color gradient starts from the zero value + + &Zero + + + + Alt+Z + + + + Visibility + + Data outside the specified min-max range will be displayed in gray + + Out g&rayed + + + + Alt+R + + Data outside the specified min-max range will be displayed with transparency @@ -3086,15 +3058,43 @@ will be displayed with transparency Out &transparent + + Alt+I + + + + Parameter range + + + + Ma&ximum: + + + + &Labels: + + Number of labels besides the color bar + + Mi&nimum: + + + + &Decimals: + + Number of decimals for labels besides the color bar + + + + Gui::Dialog::DlgSettingsColorGradientImp @@ -3118,8 +3118,7 @@ besides the color bar - Document save compression level -(0 = none, 9 = highest, 3 = default) + The application will create a new document when started @@ -3127,95 +3126,8 @@ besides the color bar - Storage - - - - Saving transactions (Auto-save) - - - - Discard saved transaction after saving document - - - - Save thumbnail into project file when saving document - - - - Maximum number of backup files to keep when resaving document - - - - Document objects - - - - Allow duplicate object labels in one document - - - - Maximum Undo/Redo steps - - - - Using Undo/Redo on documents - - - - Authoring and License - - - - Author name - - - - Set on save - - - - Company - - - - Default license - - - - All rights reserved - - - - Public Domain - - - - FreeArt - - - - Other - - - - License URL - - - - Run AutoRecovery at startup - - - - Save AutoRecovery information every - - - - Add the program logo to the generated thumbnail - - - - The application will create a new document when started + Document save compression level +(0 = none, 9 = highest, 3 = default) @@ -3226,6 +3138,14 @@ besides the color bar All changes in documents are stored so that they can be undone/redone + + Using Undo/Redo on documents + + + + Maximum Undo/Redo steps + + How many Undo/Redo steps should be recorded @@ -3239,19 +3159,43 @@ This feature may slightly increase recomputation time. Allow aborting recomputation + + Storage + + + + Saving transactions (Auto-save) + + + + Discard saved transaction after saving document + + If there is a recovery file available the application will automatically run a file recovery when it is started. + + Run AutoRecovery at startup + + How often a recovery file is written + + Save AutoRecovery information every + + A thumbnail will be stored when document is saved + + Save thumbnail into project file when saving document + + Size @@ -3265,10 +3209,18 @@ Common sizes are 128, 256 and 512 The program logo will be added to the thumbnail + + Add the program logo to the generated thumbnail + + How many backup files will be kept when saving document + + Maximum number of backup files to keep when resaving document + + Backup files will get extension '.FCbak' and file names get date suffix according to the specified format @@ -3282,10 +3234,18 @@ get date suffix according to the specified format Date format + + Document objects + + Allow objects to have same label/name + + Allow duplicate object labels in one document + + Enable partial loading of external linked documents. Then only referenced objects and their dependencies will be loaded @@ -3298,6 +3258,14 @@ icon in the tree view to fully reload it. Disable partial loading of external linked objects + + Authoring and License + + + + Author name + + All documents that will be created will get the specified author name. Keep blank for anonymous. @@ -3308,14 +3276,30 @@ You can also use the form: John Doe <john@doe.com> The field 'Last modified by' will be set to specified author when saving the file + + Set on save + + + + Company + + Default company name to use for new files + + Default license + + Default license for new documents + + All rights reserved + + Creative Commons Attribution @@ -3340,6 +3324,22 @@ You can also use the form: John Doe <john@doe.com> Creative Commons Attribution-NonCommercial-NoDerivatives + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + + URL describing more about the license @@ -3419,11 +3419,11 @@ You can also use the form: John Doe <john@doe.com> - Items + Current line highlight - Current line highlight + Items @@ -3433,36 +3433,12 @@ You can also use the form: John Doe <john@doe.com> Image settings - - Image properties - - - - Back&ground: - - - - Current - - - - White - - - - Black - - Image dimensions - Pixel - - - - &Width: + Standard sizes: @@ -3482,7 +3458,11 @@ You can also use the form: John Doe <john@doe.com> - Standard sizes: + &Width: + + + + Pixel @@ -3525,6 +3505,34 @@ You can also use the form: John Doe <john@doe.com> Alt+1 + + Image properties + + + + Back&ground: + + + + Current + + + + White + + + + Black + + + + Transparent + + + + Creation method: + + Image comment @@ -3537,18 +3545,10 @@ You can also use the form: John Doe <john@doe.com> Insert comment - - Transparent - - Add watermark - - Creation method: - - Gui::Dialog::DlgSettingsImageImp @@ -3571,6 +3571,14 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsLazyLoaded + + Available Workbenches + + + + <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> + + Workbench Name @@ -3583,14 +3591,6 @@ You can also use the form: John Doe <john@doe.com> Load Now - - <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html> - - - - Available Workbenches - - Gui::Dialog::DlgSettingsLazyLoadedImp @@ -3629,14 +3629,58 @@ You can also use the form: John Doe <john@doe.com> Macro + + General macro settings + + + + Variables defined by macros are created as local variables + + + + Run macros in local environment + + Macro recording settings + + Macro path + + + + The directory in which the application will search for macros + + + + Gui commands + + + + Recorded macros will also contain user interface commands + + + + Record GUI commands + + + + Recorded macros will also contain user interface commands as comments + + + + Record as comment + + Logging Commands + + Commands executed by macro scripts are shown in Python console + + Show script commands in python console @@ -3649,50 +3693,6 @@ You can also use the form: John Doe <john@doe.com> FullScript.FCScript - - Gui commands - - - - Record as comment - - - - Macro path - - - - General macro settings - - - - Run macros in local environment - - - - Record GUI commands - - - - Variables defined by macros are created as local variables - - - - Commands executed by macro scripts are shown in Python console - - - - Recorded macros will also contain user interface commands - - - - Recorded macros will also contain user interface commands as comments - - - - The directory in which the application will search for macros - - Recent macros menu @@ -3764,6 +3764,22 @@ You can also use the form: John Doe <john@doe.com> Bottom right + + Rotates to nearest possible state when clicking a cube face + + + + Rotate to nearest + + + + Cube size + + + + Size of the navigation cube + + 3D Navigation @@ -3799,6 +3815,38 @@ Turntable: the part will be rotated around the z-axis. Trackball + + Rotation mode + + + + Rotations in 3D will use current cursor position as center for rotation + + + + Window center + + + + Drag at cursor + + + + Object center + + + + Default camera orientation + + + + Default camera orientation when creating a new document or selecting the home view + + + + Camera zoom + + Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. @@ -3825,7 +3873,12 @@ The value is the diameter of the sphere to fit on the screen. - Zoom step + Zoom step + + + + How much will be zoomed. +Zoom step of '1' means a factor of 7.5 for every zoom step. @@ -3846,10 +3899,6 @@ Mouse tilting is not disabled by this setting. Disable touchscreen tilt gesture - - Rotations in 3D will use current cursor position as center for rotation - - Isometric @@ -3890,55 +3939,6 @@ Mouse tilting is not disabled by this setting. Custom - - Default camera orientation - - - - Default camera orientation when creating a new document or selecting the home view - - - - Rotation mode - - - - Window center - - - - Drag at cursor - - - - Object center - - - - Rotates to nearest possible state when clicking a cube face - - - - Rotate to nearest - - - - Cube size - - - - Size of the navigation cube - - - - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. - - - - Camera zoom - - Gui::Dialog::DlgSettingsPythonConsole @@ -4014,23 +4014,11 @@ horizontal space in Python console - Standard (mm/kg/s/degree) + Unit system: - MKS (m/kg/s/degree) - - - - Magnitude - - - - Unit - - - - US customary (in/lb) + Unit system that should be used for all parts the application @@ -4038,21 +4026,17 @@ horizontal space in Python console - Imperial decimal (in/lb) - - - - Building Euro (cm/m²/m³) - - - - Metric small parts & CNC(mm, mm/min) + Number of decimals that should be shown for numbers and dimensions Minimum fractional inch: + + Minimum fractional inch to be displayed + + 1/2" @@ -4082,25 +4066,41 @@ horizontal space in Python console - Unit system: + Magnitude - Number of decimals that should be shown for numbers and dimensions + Unit - Unit system that should be used for all parts the application + Standard (mm/kg/s/degree) - Minimum fractional inch to be displayed + MKS (m/kg/s/degree) + + + + US customary (in/lb) + + + + Imperial decimal (in/lb) + + + + Building Euro (cm/m²/m³) Building US (ft-in/sqft/cft) + + Metric small parts & CNC(mm, mm/min) + + Imperial for Civil Eng (ft, ft/sec) @@ -4121,77 +4121,77 @@ horizontal space in Python console - Enable selection highlighting + Enable preselection and highlight by specified color Enable preselection highlighting - - Background color - - - - Middle color - - - - Color gradient - - - - Simple color - - - - Object being edited - - - - Active container - - - - Enable preselection and highlight by specified color - - Enable selection highlighting and use specified color + + Enable selection highlighting + + Background color for the model view + + Background color + + Background will have selected color - Color gradient will get selected color as middle color - - - - Bottom color + Simple color Background will have selected color gradient + + Color gradient + + Top color + + Bottom color + + + + Color gradient will get selected color as middle color + + + + Middle color + + Tree view + + Object being edited + + Background color for objects in tree view that are currently edited + + Active container + + Background color for active containers in tree view @@ -4210,42 +4210,39 @@ horizontal space in Python console Units calculator - - as: - - - - => - - - - Quantity: - - - - Copy - - - - Close - - Input the source value and unit + + as: + + Input here the unit for the result + + => + + Result + + List of last used calculations. +To add a calculation press Return in the value input field + + Quantity + + Quantity: + + Unit system: @@ -4276,19 +4273,22 @@ The preference system is the one set in the general preferences. - List of last used calculations. -To add a calculation press Return in the value input field + Copy + + + + Close Gui::Dialog::DlgUnitsCalculator - unit mismatch + unknown unit: - unknown unit: + unit mismatch @@ -4298,28 +4298,12 @@ To add a calculation press Return in the value input field Workbenches - - Enabled workbenches - - Disabled workbenches - Move down - - - - <html><head/><body><p><span style=" font-weight:600;">Move the selected item down.</span></p><p>The item will be moved down</p></body></html> - - - - Move left - - - - <html><head/><body><p><span style=" font-weight:600;">Remove the selected workbench from enabled workbenches</span></p></body></html> + Enabled workbenches @@ -4330,10 +4314,6 @@ To add a calculation press Return in the value input field <html><head/><body><p><span style=" font-weight:600;">Move the selected workbench to enabled workbenches.</span></p></body></html> - - Sort enabled workbenches - - Move up @@ -4346,10 +4326,30 @@ To add a calculation press Return in the value input field Add all to enabled workbenches + + <html><head/><body><p><span style=" font-weight:600;">Remove the selected workbench from enabled workbenches</span></p></body></html> + + + + Sort enabled workbenches + + <p>Sort enabled workbenches</p> + + Move left + + + + Move down + + + + <html><head/><body><p><span style=" font-weight:600;">Move the selected item down.</span></p><p>The item will be moved down</p></body></html> + + <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html> @@ -4368,6 +4368,12 @@ To add a calculation press Return in the value input field Document Recovery + + Press 'Start Recovery' to start the recovery process of the document listed below. + +The 'Status' column shows whether the document could be recovered. + + Status of recovered documents: @@ -4380,6 +4386,10 @@ To add a calculation press Return in the value input field Status + + Cleanup... + + Start Recovery @@ -4404,10 +4414,6 @@ To add a calculation press Return in the value input field Finish - - Cleanup... - - Delete @@ -4428,20 +4434,14 @@ To add a calculation press Return in the value input field Are you sure you want to delete all transient directories? - - Transient directories deleted. - - - - Press 'Start Recovery' to start the recovery process of the document listed below. - -The 'Status' column shows whether the document could be recovered. - - When deleting all transient directories you won't be able to recover any files afterwards. + + Transient directories deleted. + + Transient deleted @@ -4574,7 +4574,7 @@ The 'Status' column shows whether the document could be recovered. - Z: + X: @@ -4582,7 +4582,7 @@ The 'Status' column shows whether the document could be recovered. - X: + Z: @@ -4643,6 +4643,10 @@ The 'Status' column shows whether the document could be recovered.Collapse + + Do you really want to remove this parameter group? + + Existing sub-group @@ -4667,10 +4671,6 @@ The 'Status' column shows whether the document could be recovered.Reading from '%1' failed. - - Do you really want to remove this parameter group? - - Gui::Dialog::ParameterValue @@ -4725,80 +4725,40 @@ The 'Status' column shows whether the document could be recovered.Placement - - OK - - Translation: - - Z: - - - - Y: - - X: - Rotation: + Y: - Angle: - - - - Axis: - - - - Center: - - - - Rotation axis with angle - - - - Apply - - - - Reset - - - - Close - - - - Incorrect quantity - - - - There are input fields with incorrect input, please ensure valid placement values! - - - - Use center of mass + Z: Axial: + + Shift click for opposite direction + + Apply axial - Shift click for opposite direction + Center: + + + + Use center of mass @@ -4806,19 +4766,23 @@ The 'Status' column shows whether the document could be recovered. - Apply incremental changes + Rotation: - Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. + Rotation axis with angle - Pitch (around y-axis): + Euler angles (zy'x'') - Roll (around x-axis): + Axis: + + + + Angle: @@ -4829,16 +4793,52 @@ The 'Status' column shows whether the document could be recovered.Yaw (around z-axis) + + Pitch (around y-axis): + + Pitch (around y-axis) + + Roll (around x-axis): + + Roll (around the x-axis) - Euler angles (zy'x'') + Apply incremental changes + + + + Reset + + + + OK + + + + Close + + + + Apply + + + + Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard. + + + + Incorrect quantity + + + + There are input fields with incorrect input, please ensure valid placement values! @@ -4891,11 +4891,11 @@ The 'Status' column shows whether the document could be recovered. - Close + Refresh - Refresh + Close @@ -4906,11 +4906,11 @@ The 'Status' column shows whether the document could be recovered. - Nodes + Name - Name + Nodes @@ -4974,23 +4974,6 @@ The 'Status' column shows whether the document could be recovered.The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default. - - Document - - - - Name - - - - &Use Original Selections - - - - Ignore dependencies and proceed with objects -originally selected prior to opening this dialog - - Auto select depending objects @@ -4999,6 +4982,14 @@ originally selected prior to opening this dialog Depending on + + Document + + + + Name + + Depended by @@ -5011,6 +5002,15 @@ originally selected prior to opening this dialog All + + &Use Original Selections + + + + Ignore dependencies and proceed with objects +originally selected prior to opening this dialog + + Gui::DlgTreeWidget @@ -5055,34 +5055,6 @@ originally selected prior to opening this dialog Options - - Clear - - - - Save As... - - - - Save Report Output - - - - Go to end - - - - Redirect Python output - - - - Redirect Python errors - - - - Plain Text Files - - Display message types @@ -5107,6 +5079,34 @@ originally selected prior to opening this dialog Show output window on + + Redirect Python output + + + + Redirect Python errors + + + + Go to end + + + + Clear + + + + Save As... + + + + Save Report Output + + + + Plain Text Files + + Gui::DockWnd::ReportView @@ -5121,6 +5121,10 @@ originally selected prior to opening this dialog Gui::DockWnd::SelectionView + + Selection View + + Search @@ -5133,6 +5137,14 @@ originally selected prior to opening this dialog Clears the search field + + The number of selected items + + + + Picked object list + + Select only @@ -5165,14 +5177,6 @@ originally selected prior to opening this dialog Selects and locates this object in the tree view - - To python console - - - - Reveals this object and its subelements in the python console. - - Mark to recompute @@ -5182,11 +5186,11 @@ originally selected prior to opening this dialog - Selection View + To python console - The number of selected items + Reveals this object and its subelements in the python console. @@ -5197,10 +5201,6 @@ originally selected prior to opening this dialog Creates a standalone copy of this subshape in the document - - Picked object list - - Gui::DocumentModel @@ -5234,10 +5234,18 @@ This has been modified outside of the source editor. Do you want to reload it? + + FreeCAD macro + + Export PDF + + PDF file + + untitled[*] @@ -5258,14 +5266,6 @@ Do you want to save your changes? Formatted - - FreeCAD macro - - - - PDF file - - Gui::ExpressionLineEdit @@ -5359,7 +5359,31 @@ Do you want to save your changes? Gui::GraphvizView - Export graph + Graphviz not found + + + + Graphviz couldn't be found on your system. + + + + Read more about it here. + + + + Do you want to specify its installation path if it's already installed? + + + + Graphviz installation path + + + + Graphviz failed + + + + Graphviz failed to create an image file @@ -5387,31 +5411,7 @@ Do you want to save your changes? - Graphviz not found - - - - Graphviz couldn't be found on your system. - - - - Read more about it here. - - - - Do you want to specify its installation path if it's already installed? - - - - Graphviz installation path - - - - Graphviz failed - - - - Graphviz failed to create an image file + Export graph @@ -5454,14 +5454,6 @@ Do you want to save your changes? Gui::LocationDialog - - Wrong direction - - - - Direction must not be the null vector - - X @@ -5478,6 +5470,14 @@ Do you want to save your changes? User defined... + + Wrong direction + + + + Direction must not be the null vector + + Gui::LocationWidget @@ -5523,6 +5523,22 @@ Do you want to save your changes? Ready + + Help addon needed! + + + + The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager + + + + Open Addon Manager + + + + Close All + + Toggles this toolbar @@ -5531,10 +5547,6 @@ Do you want to save your changes? Toggles this dockable window - - Close All - - Unsaved document @@ -5548,18 +5560,6 @@ Do you want to save your changes? Do you want to save the document now? - - Help addon needed! - - - - The Help system of %1 is now handled by the "Help" addon. It can easily be installed via the Addons Manager - - - - Open Addon Manager - - Gui::ManualAlignment @@ -5639,11 +5639,11 @@ How do you want to proceed? - No point was picked + No point was found on model - No point was found on model + No point was picked @@ -5791,30 +5791,30 @@ How do you want to proceed? property + + Auto expand + + Show all - - Add property - - - - Remove property - - Expression... - Auto expand + Add property Rename property group + + Remove property + + Group name: @@ -5865,10 +5865,18 @@ Do you want to exit without saving your data? Unhandled FreeCAD exception. + + Unhandled std C++ exception. + + Unhandled unknown C++ exception. + + &Copy + + &Copy command @@ -5882,27 +5890,11 @@ Do you want to exit without saving your data? - Insert file name... + Save history - Save History - - - - Insert file name - - - - Unhandled std C++ exception. - - - - Word wrap - - - - &Copy + Saves Python history across %1 sessions @@ -5917,22 +5909,30 @@ Do you want to exit without saving your data? Clear console + + Insert file name... + + + + Word wrap + + + + Save History + + Macro Files + + Insert file name + + All Files - - Save history - - - - Saves Python history across %1 sessions - - Gui::PythonEditor @@ -5962,6 +5962,10 @@ Do you want to exit without saving your data? Gui::RecentMacrosAction + + none + + Run macro %1 (Shift+click to edit) shortcut: %2 @@ -5974,10 +5978,6 @@ Do you want to exit without saving your data? The file '%1' cannot be opened. - - none - - Gui::RevitNavigationStyle @@ -6128,30 +6128,30 @@ Do you want to specify another directory? TextLabel - - Recompute after commit - - - - Remove - - Edit - - Remove all - - Hide + + Remove + + + + Remove all + + Box select + + Recompute after commit + + On-top when selected @@ -6159,6 +6159,14 @@ Do you want to specify another directory? Gui::TaskView::TaskAppearance + + Appearance + + + + Document window: + + Plot mode: @@ -6175,14 +6183,6 @@ Do you want to specify another directory? Transparency: - - Appearance - - - - Document window: - - Gui::TaskView::TaskDialog @@ -6285,27 +6285,23 @@ Do you want to specify another directory? Gui::Translator - English + Afrikaans - German + Arabic - Spanish + Basque - French + Bulgarian - Italian - - - - Japanese + Catalan @@ -6316,26 +6312,82 @@ Do you want to specify another directory? Chinese Traditional + + Croatian + + + + Czech + + + + Dutch + + + + English + + + + Filipino + + + + Finnish + + + + French + + + + Galician + + + + German + + + + Greek + + + + Hungarian + + + + Indonesian + + + + Italian + + + + Japanese + + + + Kabyle + + Korean - Russian - - - - Swedish - - - - Afrikaans + Lithuanian Norwegian + + Polish + + Portuguese, Brazilian @@ -6344,102 +6396,50 @@ Do you want to specify another directory? Portuguese - - Dutch - - - - Ukrainian - - - - Finnish - - - - Croatian - - - - Polish - - - - Czech - - - - Hungarian - - Romanian + + Russian + + Slovak - - Turkish - - Slovenian - Basque + Spanish - Catalan + Spanish, Argentina - Galician + Swedish - Kabyle + Turkish - Filipino - - - - Indonesian - - - - Lithuanian + Ukrainian Valencian - - Arabic - - Vietnamese - - Bulgarian - - - - Greek - - - - Spanish, Argentina - - Georgian @@ -6462,39 +6462,11 @@ Do you want to specify another directory? Gui::TreeWidget - Create group... + Search... - Create a group - - - - Group - - - - Rename - - - - Rename object - - - - Labels & Attributes - - - - Application - - - - Finish editing - - - - Finish editing object + Search for objects @@ -6506,37 +6478,21 @@ Do you want to specify another directory? - Skip recomputes + Group - Enable or disable recomputations of document - - - - Mark to recompute - - - - Mark this object to be recomputed - - - - %1, Internal name: %2 - - - - Search... - - - - Search for objects + Labels & Attributes Description + + Application + + Show hidden items @@ -6553,6 +6509,38 @@ Do you want to specify another directory? Hide the item in tree + + Create group... + + + + Create a group + + + + Rename + + + + Rename object + + + + Finish editing + + + + Finish editing object + + + + Add dependent objects to selection + + + + Adds all dependent objects to the selection + + Close document @@ -6569,6 +6557,14 @@ Do you want to specify another directory? Reload a partially loaded document + + Skip recomputes + + + + Enable or disable recomputations of document + + Allow partial recomputes @@ -6577,6 +6573,14 @@ Do you want to specify another directory? Enable or disable recomputating editing object when 'skip recomputation' is enabled + + Mark to recompute + + + + Mark this object to be recomputed + + Recompute object @@ -6590,11 +6594,7 @@ Do you want to specify another directory? - Add dependent objects to selection - - - - Adds all dependent objects to the selection + %1, Internal name: %2 @@ -6699,6 +6699,10 @@ Do you want to specify another directory? Z: + + Grid Snap in + + 0.1 mm @@ -6755,10 +6759,6 @@ Do you want to specify another directory? 5 m - - Grid Snap in - - PropertyListDialog @@ -6773,6 +6773,10 @@ Do you want to specify another directory? QDockWidget + + Toolbox + + Tree view @@ -6785,16 +6789,12 @@ Do you want to specify another directory? Selection view - - Report view - - Combo View - Toolbox + Report view @@ -6802,11 +6802,11 @@ Do you want to specify another directory? - Display properties + DAG View - DAG View + Display properties @@ -6820,6 +6820,10 @@ Do you want to specify another directory? Display + + Workbenches + + Unknown filetype @@ -6828,6 +6832,10 @@ Do you want to specify another directory? Cannot open unknown filetype: %1 + + Export failed + + Cannot save to unknown filetype: %1 @@ -6848,6 +6856,18 @@ Do you want to specify another directory? Open document + + Error + + + + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. + + + + There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. + + Import file @@ -6860,6 +6880,55 @@ Do you want to specify another directory? Printing... + + Exporting PDF... + + + + Unsaved document + + + + The exported object contains external link. Please save the documentat least once before exporting. + + + + Delete failed + + + + Dependency error + + + + Copy selected + + + + Copy active document + + + + Copy all documents + + + + Paste + + + + Expression error + + + + Failed to parse some of the expressions. +Please check the Report View for more details. + + + + Failed to paste expressions + + Cannot load workbench @@ -6868,6 +6937,20 @@ Do you want to specify another directory? A general error occurred while loading the workbench + + Wrong selection + + + + Only one object selected. Please select two objects. +Be aware the point where you click matters. + + + + Please select two objects. +Be aware the point where you click matters. + + Save views... @@ -6892,6 +6975,10 @@ Do you want to specify another directory? Save frozen views + + Frozen views + + Restore views @@ -6957,6 +7044,10 @@ Do you want to continue? Choose an item: + + New boolean item + + Rename group @@ -6978,7 +7069,45 @@ Do you want to continue? - Save document under new filename... + Identical physical path detected. It may cause unwanted overwrite of existing document! + + + + + + Are you sure you want to continue? + + + + Please check report view for more... + + + + Physical path: + + + + Document: + + + + Path: + + + + Identical physical path + + + + Could not save document + + + + There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: + +"%1" + +Would you like to save the file with a different name? @@ -6986,7 +7115,77 @@ Do you want to continue? - Unsaved document + Save dependent files + + + + The file contains external dependencies. Do you want to save the dependent files, too? + + + + Saving document failed + + + + Save document under new filename... + + + + Save %1 Document + + + + Document + + + + Failed to save document + + + + Documents contains cyclic dependencies. Do you still want to save them? + + + + Save a copy of the document under new filename... + + + + %1 document (*.FCStd) + + + + Document not closable + + + + The document is not closable for the moment. + + + + Document not saved + + + + The document%1 could not be saved. Do you want to cancel closing it? + + + + Undo + + + + Redo + + + + There are grouped transactions in the following documents with other preceding transactions + + + + Choose 'Yes' to roll back all preceding transactions. +Choose 'No' to roll back in the active document only. +Choose 'Abort' to abort @@ -7013,6 +7212,10 @@ Do you want to continue? Outer + + Split + + No Browser @@ -7055,44 +7258,6 @@ Please open a browser window and type in: http://localhost:%1. Cannot find file %1 neither in %2 nor in %3 - - Save %1 Document - - - - %1 document (*.FCStd) - - - - Document not closable - - - - The document is not closable for the moment. - - - - Exporting PDF... - - - - Wrong selection - - - - Only one object selected. Please select two objects. -Be aware the point where you click matters. - - - - Please select two objects. -Be aware the point where you click matters. - - - - New boolean item - - Navigation styles @@ -7113,24 +7278,24 @@ Be aware the point where you click matters. Do you want to save your changes to document '%1' before closing? + + Do you want to save your changes to document before closing? + + If you don't save, your changes will be lost. - Save a copy of the document under new filename... + Apply answer to all - Frozen views + %1 Document(s) not saved - Saving document failed - - - - Document + Some documents could not be saved. Do you want to cancel closing? @@ -7153,14 +7318,6 @@ Be aware the point where you click matters. The %1 is not empty, delete its content as well? - - Export failed - - - - Split - - Translation: @@ -7177,47 +7334,6 @@ Be aware the point where you click matters. Edit text - - The exported object contains external link. Please save the documentat least once before exporting. - - - - Delete failed - - - - Dependency error - - - - Copy selected - - - - Copy active document - - - - Copy all documents - - - - Paste - - - - Expression error - - - - Failed to parse some of the expressions. -Please check the Report View for more details. - - - - Failed to paste expressions - - Simple group @@ -7279,140 +7395,16 @@ underscore, and must not start with a digit. Failed to add property to '%1': %2 - - Save dependent files - - - - The file contains external dependencies. Do you want to save the dependent files, too? - - - - Failed to save document - - - - Documents contains cyclic dependencies. Do you still want to save them? - - - - Undo - - - - Redo - - - - There are grouped transactions in the following documents with other preceding transactions - - - - Choose 'Yes' to roll back all preceding transactions. -Choose 'No' to roll back in the active document only. -Choose 'Abort' to abort - - - - Do you want to save your changes to document before closing? - - - - Apply answer to all - - Drag & drop failed - - Override colors... - - - - Identical physical path detected. It may cause unwanted overwrite of existing document! - - - - - - Are you sure you want to continue? - - - - Identical physical path - - - - Error - - - - There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - - - - There were serious errors while loading the file. Some data might have been modified or not recovered at all. Saving the project will most likely result in loss of data. - - - - Workbenches - - - - Could not save document - - - - There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details: - -"%1" - -Would you like to save the file with a different name? - - - - Document not saved - - - - The document%1 could not be saved. Do you want to cancel closing it? - - - - %1 Document(s) not saved - - - - Some documents could not be saved. Do you want to cancel closing? - - - - Please check report view for more... - - - - Physical path: - - - - Document: - - - - Path: - - - - Edit %1 - - Setup configurable object - Select which object to copy or exclude when configuration changes.All external linked object are excluded by default. + Select which object to copy or exclude when configuration changes. All external linked objects are excluded by default. @@ -7477,6 +7469,14 @@ the current copy will be lost. Transform at the origin of the placement + + Override colors... + + + + Edit %1 + + SelectionFilter @@ -8163,11 +8163,11 @@ the current copy will be lost. StdCmdMeasurementSimple - Measures distance between two selected objects + Measure distance - Measure distance + Measures distance between two selected objects @@ -8182,11 +8182,11 @@ the current copy will be lost. - Cannot merge project with itself. + %1 document (*.FCStd) - %1 document (*.FCStd) + Cannot merge project with itself. @@ -9217,11 +9217,11 @@ the current copy will be lost. StdTreeMultiDocument - Display all documents in the tree view + Multi document - Multi document + Display all documents in the tree view @@ -9261,11 +9261,11 @@ the current copy will be lost. StdTreeSingleDocument - Only display the active document in the tree view + Single document - Single document + Only display the active document in the tree view @@ -9388,11 +9388,11 @@ Are you sure you want to continue? - Object dependencies + These items are selected for deletion, but are not in the active document. - These items are selected for deletion, but are not in the active document. + Object dependencies @@ -9413,30 +9413,6 @@ Are you sure you want to continue? Normal mode - - Wireframe - - - - Wireframe mode - - - - Flat lines - - - - Flat lines mode - - - - Shaded - - - - Shaded mode - - Points @@ -9445,6 +9421,14 @@ Are you sure you want to continue? Points mode + + Wireframe + + + + Wireframe mode + + Hidden line @@ -9461,6 +9445,22 @@ Are you sure you want to continue? No shading mode + + Shaded + + + + Shaded mode + + + + Flat lines + + + + Flat lines mode + + Std_DuplicateSelection @@ -9494,11 +9494,11 @@ Do you still want to proceed? Std_Revert - This will discard all the changes since last file save. + Revert document - Revert document + This will discard all the changes since last file save. @@ -9564,6 +9564,10 @@ Do you still want to proceed? Standard views + + Axonometric + + &Stereo @@ -9616,10 +9620,6 @@ Do you still want to proceed? Special Ops - - Axonometric - - Link actions diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index 3a754ebed1..bedada3c4a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -4,438 +4,614 @@ AddonsInstaller - - Create new toolbar + + Unable to read data from GitHub: check your internet connection and proxy settings and try again. - - A macro installed with the FreeCAD Addon Manager + + Failed to connect to GitHub. Check your connection and proxy settings. - - Run - Indicates a macro that can be 'run' - - - - - Version {version} installed on {date} - - - - - Version {version} installed - - - - - Installed on {date} - - - - - Installed - - - - - Update available to version - - - - - Updated, please restart FreeCAD to use - - - - - Update check in progress - - - - - Automatic update checks disabled - - - - - Installation location - - - - - WARNING: This addon is obsolete - - - - - WARNING: This addon is Python 2 Only - - - - - WARNING: This addon requires FreeCAD - - - - - No URL or wiki page provided by this macro - - - - - Could not load README data from URL {} - - - - - Success - - - - - Changed to git ref '{}' -- please restart to use Addon. - - - - - Page JavaScript reported - - - - - Install - - - - - Uninstall - - - - - Update - - - - - Check for Update - - - - - Run Macro - - - - - Change Branch - - - - - Enable - - - - - Disable - - - - - Return to package list - - - - - Filter is valid - - - - - Filter regular expression is invalid - - - - - Click for details about package {} - - - - - Click for details about workbench {} - - - - - Click for details about macro {} - - - - - Maintainer - - - - - Maintainers: - - - - - - - Tags - - - - - updated - - - - - Author - - - - - Up-to-date - - - - - Update available - - - - - Pending restart - - - - - DISABLED - - - - - Installed version - - - - - Unknown version - - - - - Installed on - - - - - Available version - - - - - Show Addons containing: - - - - - All - - - - - Workbenches - - - - - Macros - - - - - Preference Packs - - - - - Status: - - - - - Any - - - - - Not installed - - - - - Filter - - - - - OK - - - - + Workbenches list was updated. - + + Unable to fetch git updates for workbench {} + + + + git fetch failed for {} - + + Failed to read metadata from {name} + + + + + Failed to fetch code for macro '{name}' + + + + + Retrieving macros from FreeCAD/FreeCAD-Macros Git repository + + + + + Retrieving macros from FreeCAD wiki + + + + Done locating macros. - + + Failed to execute Git Python command: check installation of GitPython and/or git + + + + An error occurred updating macros from GitHub + + + Error connecting to the Wiki, FreeCAD cannot retrieve the Wiki macro list at this time + + Caching macro code... - + + Addon Manager: a worker process failed to halt ({name}) + + + + + Addon Manager: a worker process failed to complete while fetching {name} + + + + + Out of {num_macros} macros, {num_failed} timed out while processing + + + + + Getting metadata from macro {} + + + + + Timeout while fetching metadata for macro {} + + + + + Failed to kill process for macro {}! + + + + + Retrieving macro description... - + Retrieving info from git - + Retrieving info from wiki - + + GitPython not found. Using ZIP file download instead. + + + + + Your version of Python doesn't appear to support ZIP files. Unable to proceed. + + + + + No Git Python installed, skipping git operations + + + + + + You are installing a Python 2 workbench on a system running Python 3 - + + + + + Workbench successfully updated. Please restart FreeCAD to apply the changes. + + + + + Workbench successfully updated. + + + + Error updating module - + Please fix manually - + + Workbench successfully installed. Please restart FreeCAD to apply the changes. + + + + + Addon successfully installed. + + + + + A macro has been installed and is available under Macro -> Macros menu + + + + Error: Unable to locate ZIP from - - Download complete. Unzipping file... + + Downloading: {mbytes_str}MB of {mbytes_total_str}MB ({percent}%) - + + Downloading: {bytes_str} of {bytes_total_str} bytes ({percent}%) + + + + + Downloading: {bytes_str}MB of unknown total + + + + + Error: Error while downloading ZIP file for {} + + + + + Successfully installed {} from ZIP file + + + + + + Installation of Python package {} failed + + + + Downloaded package.xml for {} - + Downloaded metadata.txt for {} - + + Downloaded requirements.txt for {} + + + + Downloaded icon for {} - - Failed to repair missing .git directory + + Addon Developer Warning: Repository URL set in package.xml file for addon {} ({}) does not match the URL it was fetched from ({}) - - Repository URL + + Addon Developer Warning: Repository branch set in package.xml file for addon {} ({}) does not match the branch it was fetched from ({}) - - Clone directory + + In macro {}, string literal not found for {} element. Guessing at intent and using string from date element. - - Error with encrypted connection + + In macro {}, string literal not found for {} element. Guessing at intent and using string representation of contents. - + + + Syntax error while reading {} from macro {} + + + + + Unable to open macro wiki page at {} + + + + + Unable to open macro code URL {rawcodeurl} + + + + + Unable to fetch the code of this macro. + + + + + Unable to retrieve a description from the wiki for macro {} + + + + + Could not locate macro-specified file {} (should have been at {}) + + + + DANGER: Developer feature - + + DANGER: Switching branches is intended for developers and beta testers, and may result in broken, non-backwards compatible documents, instability, crashes, and/or the premature heat death of the universe. Are you sure you want to continue? + + + + There are local changes - + + WARNING: This repo has uncommitted local changes. Are you sure you want to change branches (bringing the changes with you)? + + + + + + Branch git terminology - + Tag git terminology - + + Kind + Table header for git ref type (e.g. either Tag or Branch) + + + + Local name Table header for git ref name - + + Tracking + Table header for git remote tracking branch name name + + + + + Local updated + Table header for git update time of local branch + + + + + Remote updated + Table header for git update time of remote branch + + + + + Outdated GitPython detected, consider upgrading with pip. + + + + + Failed to repair missing .git directory + + + + + Repository URL + + + + + Clone directory + + + + + Could not import QtNetwork -- it does not appear to be installed on your system. Please install the package 'python3-pyside2.qtnetwork' on your system and if possible contact your FreeCAD package maintainer to alert them to the missing dependency. The Addon Manager will not be available. + + + + + Parameter error: mutually exclusive proxy options set. Resetting to default. + + + + + Parameter error: user proxy indicated, but no proxy provided. Resetting to default. + + + + + Addon Manager: Unexpected {} response from server + + + + + Error with encrypted connection + + + + + Addon Manager Warning: Could not import QtWebEngineWidgets, it seems to be missing from your system. Please use your system's package manager to install the python3-pyside2.qtwebengine* and python3-pyside2.qtwebchannel packages, and if possible alert your package creator to the missing dependency. Display of package README will be limited until this dependency is resolved. + + + + + Version {version} installed on {date} + + + + + Version {version} installed + + + + + Installed on {date} + + + + + + + + Installed + + + + + On branch {}, update available to version + + + + + Update available to version + + + + + An update is available + + + + + Git tag '{}' checked out, no updates possible + + + + + This is the latest version available for branch {} + + + + + Updated, please restart FreeCAD to use + + + + + Update check in progress + + + + + Automatic update checks disabled + + + + + Installation location + + + + + WARNING: This addon is obsolete + + + + + WARNING: This addon is Python 2 Only + + + + + WARNING: This addon requires FreeCAD + + + + + WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. + + + + + + No URL or wiki page provided by this macro + + + + + Could not load README data from URL {} + + + + + This Addon will be enabled next time you restart FreeCAD. + + + + + This Addon will be disabled next time you restart FreeCAD. + + + + + Success + + + + + Branch change succeeded, please restart to use the new version. + + + + + Changed to git ref '{}' -- please restart to use Addon. + + + + + Page JavaScript reported + + + + + Install + + + + + Uninstall + + + + + Update + + + + + Check for Update + + + + + Run Macro + + + + + Change Branch + + + + + Enable + + + + + Disable + + + + + Return to package list + + + + + QtWebEngine Python bindings not installed -- using fallback README display. See Report View for details and installation instructions. + + + + + The page is taking a long time to load... showing the data we have so far... + + + + + Addon Manager installation problem: could not locate ALLOWED_PYTHON_PACKAGES.txt + + + + Checking connection - + Checking for connection to GitHub... - + Connection failed - + Missing dependency - + + Could not import QtNetwork -- see Report View for details. Addon Manager unavailable. + + + + Starting up... @@ -444,11 +620,34 @@ Loading addon information + + + Worker process {} is taking a long time to stop... + + + + + + Previous cache process was interrupted, restarting... + + + + + + Custom repo list changed, forcing recache... + + + Addon manager + + + You must restart FreeCAD for changes to take effect. + + Restart now @@ -460,131 +659,399 @@ - + + Refresh local cache - + Updating cache... - + Could not find addon '{}' to select - + + Checking for updates... - - + + Apply {} update(s) - - - + - + No updates available - + + This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + + + + Too many to list - + + Missing Requirement - + + The following Python packages are allowed to be automatically installed + + + + + Addon '{}' requires '{}', which is not available in your copy of FreeCAD. + + + + + Addon '{}' requires the following workbenches, which are not available in your copy of FreeCAD: + + + + Press OK to install anyway. - + + Optional dependency on {} ignored because it is not in the allow-list + + + + + + Installing dependencies - + Cannot execute Python - + + Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + + + + + Dependencies could not be installed. Continue with installation of {} anyway? + + + + Cannot execute pip - + + Failed to execute pip, which may be missing from your Python installation. Please ensure your system has pip installed and try again. The failed command was: + + + + + Continue with installation of {} anyway? + + + + Package installation failed - + See Report View for detailed failure log. - + + Macro successfully installed. The macro is now available from the Macros dialog. + + + + Installation of macro failed - + + {} total, see Report view for list + Describes the number of updates that were completed ('{}' is replaced by the number of updates) + + + + + All packages were successfully updated + + + + + + Succeeded - + All packages updates failed: - + + + Failed - + + Some packages updates failed. + + + + Update report - + Installation succeeded - + Installation failed - + + Execution of macro failed. See console for failure details. + + + + Confirm remove - + Are you sure you want to uninstall this Addon? - + + Macro {} has local changes in the macros directory, so is not being removed by this uninstall process. + + + + + + Execution of Addon's uninstall.py script failed. Proceeding with uninstall... + + + + + Unable to remove this addon with the Addon Manager. + + + + Successfully uninstalled {} - - Unable to fetch the code of this macro. + + Failed to uninstall {}. Please remove manually. + + + + + Filter is valid + + + + + Filter regular expression is invalid + + + + + Click for details about package {} + + + + + Click for details about workbench {} + + + + + Click for details about macro {} + + + + + Maintainer + + + + + Maintainers: + + + + + Tags + + + + + updated + + + + + Author + + + + + + Up-to-date + + + + + + + Update available + + + + + + Pending restart + + + + + + DISABLED + + + + + Installed version + + + + + Unknown version + + + + + Installed on + + + + + Available version + + + + + Show Addons containing: + + + + + All + + + + + Workbenches + + + + + Macros + + + + + Preference Packs + + + + + Status: + + + + + Any + + + + + Not installed + + + + + Filter + + + + + OK + + + + + Create new toolbar + + + + + A macro installed with the FreeCAD Addon Manager + + + + + Run + Indicates a macro that can be 'run' + + + + + Std_AddonMgr + + + &Addon manager + + + + + Manage external workbenches, macros, and preference packs @@ -621,57 +1088,6 @@ - - ExpandedView - - - Form - - - - - Icon - - - - - <h1>Package Name</h1> - - - - - Version - - - - - (tags) - - - - - Description - - - - - Maintainer - - - - - UpdateAvailable - - - - - Std_AddonMgr - - - &Addon manager - - - DependencyResolutionDialog @@ -800,6 +1216,49 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore + + ExpandedView + + + Form + + + + + Icon + + + + + <h1>Package Name</h1> + + + + + Version + + + + + (tags) + + + + + Description + + + + + Maintainer + + + + + UpdateAvailable + + + Gui::Dialog::DlgSettingsAddonManager diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 9ef5b52828..ec2648983b 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -3,16 +3,1709 @@ App::Property + + + + The placement of this object + + + + + + The shape of this object + + + + + The objects that must be considered by this section plane. Empty means the whole document. + + + + + If false, non-solids will be cut too, with possible wrong results. + + + + + If True, resulting views will be clipped to the section plane area. + + + + + If true, the color of the objects material will be used to fill cut areas. + + + + + Geometry further than this value will be cut off. Keep zero for unlimited. + + + + + The display length of this section plane + + + + + The display height of this section plane + + + + + The size of the arrows of this section plane + + + + + The transparency of this object + + + + + + The line width of this object + + + + + + Show the cut in the 3D view + + + + + The color of this object + + + + + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + + + + + Show the label in the 3D view + + + + + + The name of the font + + + + + + The size of the text font + + + + + + + The linked object + + + + + The rendering mode to use + + + + + If cut geometry is shown or not + + + + + If cut geometry is filled or not + + + + + + The line width of the rendered objects + + + + + The size of the texts inside this object + + + + + If checked, source objects are displayed regardless of being visible in the 3D model + + + + + The line color of the projected objects + + + + + The color of the cut faces (if turned on) + + + + + The profile used to build this frame + + + + + Specifies if the profile must be aligned with the extrusion wires + + + + + An offset vector between the base sketch and the frame + + + + + Crossing point of the path on the profile. + + + + + An optional additional placement to add to the profile before extruding it + + + + + The rotation of the profile around its extrusion axis + + + + + The type of edges to consider + + + + + If true, geometry is fused, otherwise a compound + + + + + The objects that host this window + + + + + The components of this window + + + + + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. + + + + + An optional object that defines a volume to be subtracted from hosts of this window + + + + + The width of this window + + + + + The height of this window + + + + + The normal direction of this window + + + + + The preset number this window is based on + + + + + The frame size of this window + + + + + The offset size of this window + + + + + The area of this window + + + + + The width of louvre elements + + + + + The space between louvre elements + + + + + Opens the subcomponents that have a hinge defined + + + + + The number of the wire that defines the hole. If 0, the value will be calculated automatically + + + + + Shows plan opening symbols if available + + + + + Show elevation opening symbols if available + + + + + The number of the wire that defines the hole. A value of 0 means automatic + + + + + + An optional extrusion path for this element + + + + + The computed length of the extrusion path + + + + + Start offset distance along the extrusion path (positive: extend, negative: trim) + + + + + End offset distance along the extrusion path (positive: extend, negative: trim) + + + + + Automatically align the Base of the Structure perpendicular to the Tool axis + + + + + X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + + + + + Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) + + + + + Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) + + + + + Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) + + + + + + The length of this element, if not based on a profile + + + + + + The width of this element, if not based on a profile + + + + + The height or extrusion depth of this element. Keep 0 for automatic + + + + + + + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + + + + + + The structural nodes of this element + + + + + A description of the standard profile this element is based upon + + + + + Offset distance between the centerline and the nodes line + + + + + + The facemaker type to use to build the profile of this object + + + + + If the nodes are visible or not + + + + + The width of the nodes line + + + + + The size of the node points + + + + + The color of the nodes line + + + + + The type of structural node + + + + + Axes systems this structure is built on + + + + + The element numbers to exclude when this structure is based on axes + + + + + If true the element are aligned with axes + + + + + The thickness or extrusion depth of this element + + + + + The number of sheets to use + + + + + The offset between this panel and its baseline + + + + + The length of waves for corrugated elements + + + + + The height of waves for corrugated elements + + + + + The horizontal offset of waves for corrugated elements + + + + + The direction of waves for corrugated elements + + + + + The type of waves for corrugated elements + + + + + If the wave also affects the bottom side or not + + + + + The area of this panel + + + + + The color of the panel outline + + + + + + + The size of the tag text + + + + + The color of the tag text + + + + + The X offset of the tag text + + + + + The Y offset of the tag text + + + + + + + The font of the tag text + + + + + The text to display. Can be %tag%, %label% or %description% to display the panel tag or label + + + + + + The position of the tag text. Keep (0,0,0) for center position + + + + + + The rotation of the tag text + + + + + + If True, the object is rendered as a face, if possible. + + + + + The allowed angles this object can be rotated to when placed on sheets + + + + + An offset value to move the cut plane from the center point + + + + + + A margin inside the boundary + + + + + + Turns the display of the margin on/off + + + + + The linked Panel cuts + + + + + The tag text to display + + + + + The font file + + + + + The width of the sheet + + + + + The height of the sheet + + + + + The fill ratio of this sheet + + + + + Specifies an angle for the wood grain (Clockwise, 0 is North) + + + + + Specifies the scale applied to each panel view. + + + + + A list of possible rotations for the nester + + + + + Turns the display of the wood grain texture on/off + + + + + A single section of the fence + + + + + A single fence post + + + + + The Path the fence should follow + + + + + The number of sections the fence is built of + + + + + The number of posts used to build the fence + + + + + When true, the fence will be colored like the original post and section. + + + + + The axes this system is made of + + + + + The placement of this axis system + + + + + IFC data + + + + + + The type of this object + + + + + IFC properties of this object + + + + + + Description of IFC attributes are not yet implemented + + + + + An optional host object for this curtain wall + + + + + The height of the curtain wall, if based on an edge + + + + + The number of vertical mullions + + + + + If the profile of the vertical mullions get aligned with the surface or not + + + + + The number of vertical sections of this curtain wall + + + + + The height of the vertical mullions profile, if no profile is used + + + + + The width of the vertical mullions profile, if no profile is used + + + + + A profile for vertical mullions (disables vertical mullion size) + + + + + The number of horizontal mullions + + + + + If the profile of the horizontal mullions gets aligned with the surface or not + + + + + The number of horizontal sections of this curtain wall + + + + + The height of the horizontal mullions profile, if no profile is used + + + + + The width of the horizontal mullions profile, if no profile is used + + + + + A profile for horizontal mullions (disables horizontal mullion size) + + + + + The number of diagonal mullions + + + + + The size of the diagonal mullions, if any, if no profile is used + + + + + A profile for diagonal mullions, if any (disables horizontal mullion size) + + + + + The number of panels + + + + + The thickness of the panels + + + + + Swaps horizontal and vertical lines + + + + + Perform subtractions between components so none overlap + + + + + Centers the profile over the edges or not + + + + + The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall + + + + + Outside Diameter + + + + + Wall thickness + + + + + + + + Width of the beam + + + + + + + + Height of the beam + + + + + Thickness of the web + + + + + Thickness of the flanges + + + + + Thickness of the sides + + + + + Thickness of the webs + + + + + Thickness of the flange + + + + + + A description for this material + + + + + + A standard code (MasterFormat, OmniClass,...) + + + + + A URL where to find information about this material + + + + + The transparency value of this material + + + + + The color of this material + + + + + The color of this material when cut + + + + + The list of layer names + + + + + The list of layer materials + + + + + The list of layer thicknesses + + + + + The angle of the truss + + + + + The slant type of this truss + + + + + The normal direction of this truss + + + + + The height of the truss at the start position + + + + + The height of the truss at the end position + + + + + An optional start offset for the top strut + + + + + An optional end offset for the top strut + + + + + The height of the main top and bottom elements of the truss + + + + + The width of the main top and bottom elements of the truss + + + + + The type of the middle element of the truss + + + + + The direction of the rods + + + + + The diameter or side of the rods + + + + + The number of rod sections + + + + + If the truss has a rod at its endpoint or not + + + + + How to draw the rods + + + + + The objects that make the boundaries of this space object + + + + + The computed floor area of this space + + + + + The finishing of the floor of this space + + + + + The finishing of the walls of this space + + + + + The finishing of the ceiling of this space + + + + + Objects that are included inside this space, such as furniture + + + + + The type of this space + + + + + The thickness of the floor finish + + + + + The number of people who typically occupy this space + + + + + The electric power needed to light this space in Watts + + + + + The electric power needed by the equipment of this space in Watts + + + + + If True, Equipment Power will be automatically filled by the equipment included in this space + + + + + The type of air conditioning of this space + + + + + Specifies if this space is internal or external + + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + + The color of the area text + + + + + The size of the first line of text + + + + + The space between the lines of text + + + + + The position of the text. Leave (0,0,0) for automatic position + + + + + The justification of the text + + + + + The number of decimals to use for calculated texts + + + + + Show the unit suffix + + + + The type of this building + + + The diameter of this pipe, if not based on a profile + + + + + The length of this pipe, if not based on an edge + + + + + An optional closed profile to base this pipe on + + + + + Offset from the start point + + + + + Offset from the end point + + + + + The wall thickness of this pipe, if not based on a profile + + + + + The curvature radius of this connector + + + + + The pipes linked by this connector + + + + + The type of this connector + + + + + The intervals between axes + + + + + The angles of each axis + + + + + The label of each axis + + + + + An optional custom bubble number + + + + + The length of the axes + + + + + If not zero, the axes are not represented as one full line but as two lines of the given length + + + + + The size of the axis bubbles + + + + + The numbering style + + + + + The type of line to draw this axis + + + + + Where to add bubbles to this axis: Start, end, both or none + + + + + The line width to draw this axis + + + + + The color of this axis + + + + + The number of the first axis + + + + + The font to use for texts + + + + + The font size + + + + + If true, show the labels + + + + + A transformation to apply to each label + + + + + The list of angles of the roof segments + + + + + The list of horizontal length projections of the roof segments + + + + + The list of IDs of the relative profiles of the roof segments + + + + + The list of thicknesses of the roof segments + + + + + The list of overhangs of the roof segments + + + + + The list of calculated heights of the roof segments + + + + + The face number of the base object used to build the roof + + + + + The total length of the ridges and hips of the roof + + + + + The total length of the borders of the roof + + + + + Specifies if the direction of the roof should be flipped + + + The height of this object + + + + The computed floor area of this floor + + + + + The diameter of the bar + + + + + The distance between the border of the beam and the first bar (concrete cover). + + + + + The distance between the border of the beam and the last bar (concrete cover). + + + + + The amount of bars + + + + + The spacing between the bars + + + + + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. + + + + + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. + + + + + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. + + + + + List of placement of all the bars + + + + + The structure object that hosts this rebar + + + + + The custom spacing of rebar + + + + + Length of a single rebar + + + + + Total length of all rebars + + + + + The rebar mark + + + + + Shape of rebar + + + + + The length of this element + + + + + The width of this element + + + + + The height of this element + + + + + + + The size of the chamfer of this element + + + + + The dent length of this element + + + + + + The dent height of this element + + + + + + The dents of this element + + + + + The chamfer length of this element + + + + + The base length of this element + + + + + The groove depth of this element + + + + + The groove height of this element + + + + + The spacing between the grooves of this element + + + + + The number of grooves of this element + + + + + The dent width of this element + + + + + The type of this slab + + + + + The size of the base of this element + + + + + The number of holes in this element + + + + + The major radius of the holes of this element + + + + + The minor radius of the holes of this element + + + + + The spacing between the holes of this element + + + + + The length of the down floor of this element + + + + + The number of risers in this element + + + + + The riser height of this element + + + + + The tread depth of this element + + + + + The length of this wall. Not used if this wall is based on an underlying object + + + + + The width of this wall. Not used if this wall is based on a face + + + + + This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + + + + + This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + + + + + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + + + + + The area of this wall as a simple Height * Length calculation + + + + + The alignment of this wall on its base object, if applicable + + + + + The face number of the base object used to build this wall + + + + + The offset between this wall and its baseline (only for left and right alignments) + + + + + Enable this to make the wall generate blocks + + + + + The length of each block + + + + + The height of each block + + + + + The horizontal offset of the first line of blocks + + + + + The horizontal offset of the second line of blocks + + + + + The size of the joints between each block + + + + + The number of entire blocks + + + + + The number of broken blocks + + + + + The model description of this equipment + + + + + The URL of the product page of this equipment + + + + + Additional snap points for this equipment + + + + + The electric power needed by this equipment in Watts + + + + + The description column + + + + + The values column + + + + + The units column + + + + + The objects column + + + + + The filter column + + + + + If True, a spreadsheet containing the results is recreated when needed + + + + + The spreadsheet to print the results to + + + + + If True, additional lines with each individual object are added to the results + + + + + The base object this component is built upon + + + + + The object this component is cloning + + + + + + Other shapes that are appended to this object + + + + + + Other shapes that are subtracted from this object + + + + + + An optional description for this component + + + + + + An optional tag for this component + + + + + An optional standard (OmniClass, etc...) code for this component + + + + + A material for this object + + + + + Specifies if moving this object moves its base instead + + + + + Specifies if this object must move together when its host is moved + + + + + The area of all vertical faces of this object + + + + + + The area of the projection of this object onto the XY plane + + + + + The perimeter length of the horizontal area + + + + + An optional higher-resolution mesh or shape for this object + + + + + An optional axis or axis system on which this object should be duplicated + + + + + Use the material color as this object's shape color, if available + + + + + The base file this component is built upon + + + + + The part to use from the base file + + + + + The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation + + + + + Fuse objects of same material + + + + + The latest time stamp of the linked file + + + + + If true, the colors from the linked file will be kept updated + + If true, the height value propagates to contained objects @@ -23,26 +1716,6 @@ The level of the (0,0,0) point of this level - - - The computed floor area of this floor - - - - - An optional description for this component - - - - - An optional tag for this component - - - - - The shape of this object - - This property stores an inventor representation for this object @@ -58,11 +1731,6 @@ A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files - - - The line width of this object - - An optional unit to express levels @@ -203,706 +1871,6 @@ A margin to use when autosize is turned on - - - The base object this component is built upon - - - - - The object this component is cloning - - - - - Other shapes that are appended to this object - - - - - Other shapes that are subtracted from this object - - - - - An optional standard (OmniClass, etc...) code for this component - - - - - A material for this object - - - - - Specifies if moving this object moves its base instead - - - - - Specifies if this object must move together when its host is moved - - - - - The area of all vertical faces of this object - - - - - The area of the projection of this object onto the XY plane - - - - - The perimeter length of the horizontal area - - - - - An optional higher-resolution mesh or shape for this object - - - - - An optional axis or axis system on which this object should be duplicated - - - - - Use the material color as this object's shape color, if available - - - - - IFC data - - - - - The type of this object - - - - - IFC properties of this object - - - - - Description of IFC attributes are not yet implemented - - - - - A single section of the fence - - - - - A single fence post - - - - - The Path the fence should follow - - - - - The number of sections the fence is built of - - - - - The number of posts used to build the fence - - - - - When true, the fence will be colored like the original post and section. - - - - - The axes this system is made of - - - - - The placement of this axis system - - - - - A description for this material - - - - - A standard code (MasterFormat, OmniClass,...) - - - - - A URL where to find information about this material - - - - - The transparency value of this material - - - - - The color of this material - - - - - The color of this material when cut - - - - - The list of layer names - - - - - The list of layer materials - - - - - The list of layer thicknesses - - - - - The description column - - - - - The values column - - - - - The units column - - - - - The objects column - - - - - The filter column - - - - - If True, a spreadsheet containing the results is recreated when needed - - - - - The spreadsheet to print the results to - - - - - If True, additional lines with each individual object are added to the results - - - - - The objects that make the boundaries of this space object - - - - - The computed floor area of this space - - - - - The finishing of the floor of this space - - - - - The finishing of the walls of this space - - - - - The finishing of the ceiling of this space - - - - - Objects that are included inside this space, such as furniture - - - - - The type of this space - - - - - The thickness of the floor finish - - - - - The number of people who typically occupy this space - - - - - The electric power needed to light this space in Watts - - - - - The electric power needed by the equipment of this space in Watts - - - - - If True, Equipment Power will be automatically filled by the equipment included in this space - - - - - The type of air conditioning of this space - - - - - Specifies if this space is internal or external - - - - - The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - - - - - The name of the font - - - - - The color of the area text - - - - - The size of the text font - - - - - The size of the first line of text - - - - - The space between the lines of text - - - - - The position of the text. Leave (0,0,0) for automatic position - - - - - The justification of the text - - - - - The number of decimals to use for calculated texts - - - - - Show the unit suffix - - - - - The placement of this object - - - - - The objects that must be considered by this section plane. Empty means the whole document. - - - - - If false, non-solids will be cut too, with possible wrong results. - - - - - If True, resulting views will be clipped to the section plane area. - - - - - If true, the color of the objects material will be used to fill cut areas. - - - - - Geometry further than this value will be cut off. Keep zero for unlimited. - - - - - The display length of this section plane - - - - - The display height of this section plane - - - - - The size of the arrows of this section plane - - - - - The transparency of this object - - - - - Show the cut in the 3D view - - - - - The color of this object - - - - - The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - - - - - Show the label in the 3D view - - - - - The linked object - - - - - The rendering mode to use - - - - - If cut geometry is shown or not - - - - - If cut geometry is filled or not - - - - - The line width of the rendered objects - - - - - The size of the texts inside this object - - - - - If checked, source objects are displayed regardless of being visible in the 3D model - - - - - The line color of the projected objects - - - - - The color of the cut faces (if turned on) - - - - - The diameter of this pipe, if not based on a profile - - - - - The length of this pipe, if not based on an edge - - - - - An optional closed profile to base this pipe on - - - - - Offset from the start point - - - - - Offset from the end point - - - - - The wall thickness of this pipe, if not based on a profile - - - - - The curvature radius of this connector - - - - - The pipes linked by this connector - - - - - The type of this connector - - - - - The angle of the truss - - - - - The slant type of this truss - - - - - The normal direction of this truss - - - - - The height of the truss at the start position - - - - - The height of the truss at the end position - - - - - An optional start offset for the top strut - - - - - An optional end offset for the top strut - - - - - The height of the main top and bottom elements of the truss - - - - - The width of the main top and bottom elements of the truss - - - - - The type of the middle element of the truss - - - - - The direction of the rods - - - - - The diameter or side of the rods - - - - - The number of rod sections - - - - - If the truss has a rod at its endpoint or not - - - - - How to draw the rods - - - - - The objects that host this window - - - - - The components of this window - - - - - The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - - - - - An optional object that defines a volume to be subtracted from hosts of this window - - - - - The width of this window - - - - - The height of this window - - - - - The normal direction of this window - - - - - The preset number this window is based on - - - - - The frame size of this window - - - - - The offset size of this window - - - - - The area of this window - - - - - The width of louvre elements - - - - - The space between louvre elements - - - - - Opens the subcomponents that have a hinge defined - - - - - The number of the wire that defines the hole. If 0, the value will be calculated automatically - - - - - Shows plan opening symbols if available - - - - - Show elevation opening symbols if available - - - - - The number of the wire that defines the hole. A value of 0 means automatic - - - - - The profile used to build this frame - - - - - Specifies if the profile must be aligned with the extrusion wires - - - - - An offset vector between the base sketch and the frame - - - - - Crossing point of the path on the profile. - - - - - An optional additional placement to add to the profile before extruding it - - - - - The rotation of the profile around its extrusion axis - - - - - The type of edges to consider - - - - - If true, geometry is fused, otherwise a compound - - The length of these stairs, if no baseline is defined @@ -989,6 +1957,7 @@ + The 'left outline' of stairs @@ -1034,6 +2003,7 @@ + The overlap of the stringers above the bottom of the treads @@ -1058,291 +2028,6 @@ The type of connection between the end of the stairs and the upper floor slab - - - The model description of this equipment - - - - - The URL of the product page of this equipment - - - - - Additional snap points for this equipment - - - - - The electric power needed by this equipment in Watts - - - - - The diameter of the bar - - - - - The distance between the border of the beam and the first bar (concrete cover). - - - - - The distance between the border of the beam and the last bar (concrete cover). - - - - - The amount of bars - - - - - The spacing between the bars - - - - - The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - - - - - The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - - - - - The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. - - - - - List of placement of all the bars - - - - - The structure object that hosts this rebar - - - - - The custom spacing of rebar - - - - - Length of a single rebar - - - - - Total length of all rebars - - - - - The rebar mark - - - - - Shape of rebar - - - - - An optional host object for this curtain wall - - - - - The height of the curtain wall, if based on an edge - - - - - The number of vertical mullions - - - - - If the profile of the vertical mullions get aligned with the surface or not - - - - - The number of vertical sections of this curtain wall - - - - - The height of the vertical mullions profile, if no profile is used - - - - - The width of the vertical mullions profile, if no profile is used - - - - - A profile for vertical mullions (disables vertical mullion size) - - - - - The number of horizontal mullions - - - - - If the profile of the horizontal mullions gets aligned with the surface or not - - - - - The number of horizontal sections of this curtain wall - - - - - The height of the horizontal mullions profile, if no profile is used - - - - - The width of the horizontal mullions profile, if no profile is used - - - - - A profile for horizontal mullions (disables horizontal mullion size) - - - - - The number of diagonal mullions - - - - - The size of the diagonal mullions, if any, if no profile is used - - - - - A profile for diagonal mullions, if any (disables horizontal mullion size) - - - - - The number of panels - - - - - The thickness of the panels - - - - - Swaps horizontal and vertical lines - - - - - Perform subtractions between components so none overlap - - - - - Centers the profile over the edges or not - - - - - The vertical direction reference to be used by this object to deduce vertical/horizontal directions. Keep it close to the actual vertical direction of your curtain wall - - - - - The base file this component is built upon - - - - - The part to use from the base file - - - - - The way the referenced objects are included in the current document. 'Normal' includes the shape, 'Transient' discards the shape when the object is switched off (smaller filesize), 'Lightweight' does not import the shape but only the OpenInventor representation - - - - - Fuse objects of same material - - - - - The latest time stamp of the linked file - - - - - If true, the colors from the linked file will be kept updated - - - - - Outside Diameter - - - - - Wall thickness - - - - - Width of the beam - - - - - Height of the beam - - - - - Thickness of the web - - - - - Thickness of the flanges - - - - - Thickness of the sides - - - - - Thickness of the webs - - - - - Thickness of the flange - - The base terrain of this site @@ -1374,6 +2059,7 @@ + The latitude of this site @@ -1459,7 +2145,7 @@ - + When set to 'True North' the whole geometry will be rotated to match the true north of this site @@ -1483,1109 +2169,17 @@ Update the Declination value based on the compass rotation - - - The length of this wall. Not used if this wall is based on an underlying object - - - - - The width of this wall. Not used if this wall is based on a face - - - - - This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - - - - - This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - - - - - The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - - - - - The area of this wall as a simple Height * Length calculation - - - - - The alignment of this wall on its base object, if applicable - - - - - The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - - - - - The face number of the base object used to build this wall - - - - - The offset between this wall and its baseline (only for left and right alignments) - - - - - Enable this to make the wall generate blocks - - - - - The length of each block - - - - - The height of each block - - - - - The horizontal offset of the first line of blocks - - - - - The horizontal offset of the second line of blocks - - - - - The size of the joints between each block - - - - - The number of entire blocks - - - - - The number of broken blocks - - - - - The list of angles of the roof segments - - - - - The list of horizontal length projections of the roof segments - - - - - The list of IDs of the relative profiles of the roof segments - - - - - The list of thicknesses of the roof segments - - - - - The list of overhangs of the roof segments - - - - - The list of calculated heights of the roof segments - - - - - The face number of the base object used to build the roof - - - - - The total length of the ridges and hips of the roof - - - - - The total length of the borders of the roof - - - - - Specifies if the direction of the roof should be flipped - - - - - An optional extrusion path for this element - - - - - The computed length of the extrusion path - - - - - Start offset distance along the extrusion path (positive: extend, negative: trim) - - - - - End offset distance along the extrusion path (positive: extend, negative: trim) - - - - - Automatically align the Base of the Structure perpendicular to the Tool axis - - - - - X offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - - - - - Y offset between the Base origin and the Tool axis (only used if BasePerpendicularToTool is True) - - - - - Mirror the Base along its Y axis (only used if BasePerpendicularToTool is True) - - - - - Base rotation around the Tool axis (only used if BasePerpendicularToTool is True) - - - - - The length of this element, if not based on a profile - - - - - The width of this element, if not based on a profile - - - - - The height or extrusion depth of this element. Keep 0 for automatic - - - - - The structural nodes of this element - - - - - A description of the standard profile this element is based upon - - - - - Offset distance between the centerline and the nodes line - - - - - The facemaker type to use to build the profile of this object - - - - - If the nodes are visible or not - - - - - The width of the nodes line - - - - - The size of the node points - - - - - The color of the nodes line - - - - - The type of structural node - - - - - Axes systems this structure is built on - - - - - The element numbers to exclude when this structure is based on axes - - - - - If true the element are aligned with axes - - - - - The intervals between axes - - - - - The angles of each axis - - - - - The label of each axis - - - - - An optional custom bubble number - - - - - The length of the axes - - - - - If not zero, the axes are not represented as one full line but as two lines of the given length - - - - - The size of the axis bubbles - - - - - The numbering style - - - - - The type of line to draw this axis - - - - - Where to add bubbles to this axis: Start, end, both or none - - - - - The line width to draw this axis - - - - - The color of this axis - - - - - The number of the first axis - - - - - The font to use for texts - - - - - The font size - - - - - If true, show the labels - - - - - A transformation to apply to each label - - - - - The length of this element - - - - - The width of this element - - - - - The height of this element - - - - - The size of the chamfer of this element - - - - - The dent length of this element - - - - - The dent height of this element - - - - - The dents of this element - - - - - The chamfer length of this element - - - - - The base length of this element - - - - - The groove depth of this element - - - - - The groove height of this element - - - - - The spacing between the grooves of this element - - - - - The number of grooves of this element - - - - - The dent width of this element - - - - - The type of this slab - - - - - The size of the base of this element - - - - - The number of holes in this element - - - - - The major radius of the holes of this element - - - - - The minor radius of the holes of this element - - - - - The spacing between the holes of this element - - - - - The length of the down floor of this element - - - - - The number of risers in this element - - - - - The riser height of this element - - - - - The tread depth of this element - - - - - The thickness or extrusion depth of this element - - - - - The number of sheets to use - - - - - The offset between this panel and its baseline - - - - - The length of waves for corrugated elements - - - - - The height of waves for corrugated elements - - - - - The horizontal offset of waves for corrugated elements - - - - - The direction of waves for corrugated elements - - - - - The type of waves for corrugated elements - - - - - If the wave also affects the bottom side or not - - - - - The area of this panel - - - - - The color of the panel outline - - - - - The size of the tag text - - - - - The color of the tag text - - - - - The X offset of the tag text - - - - - The Y offset of the tag text - - - - - The font of the tag text - - - - - The text to display. Can be %tag%, %label% or %description% to display the panel tag or label - - - - - The position of the tag text. Keep (0,0,0) for center position - - - - - The rotation of the tag text - - - - - If True, the object is rendered as a face, if possible. - - - - - The allowed angles this object can be rotated to when placed on sheets - - - - - An offset value to move the cut plane from the center point - - - - - A margin inside the boundary - - - - - Turns the display of the margin on/off - - - - - The linked Panel cuts - - - - - The tag text to display - - - - - The font file - - - - - The width of the sheet - - - - - The height of the sheet - - - - - The fill ratio of this sheet - - - - - Specifies an angle for the wood grain (Clockwise, 0 is North) - - - - - Specifies the scale applied to each panel view. - - - - - A list of possible rotations for the nester - - - - - Turns the display of the wood grain texture on/off - - Arch - - BuildingPart - - - - - Create BuildingPart - - - - - Error computing the shape of this object - - - - - has no solid - - - - - has an invalid shape - - - - - has a null shape - - - - - Toggle subcomponents - - - - - Closing Sketch edit - - - - - Please select a base object - - - - - Component - - - - - Remove - - - - - Add - - - - - Components of this object - - - - - Base component - - - - - Additions - - - - - Subtractions - - - - - Objects - - - - - Axes - - - - - Components - - - - - Fixtures - - - - - Group - - - - - Hosts - - - - - Edit IFC properties - - - - - Edit standard code - - - - - Property - - - - - Type - - - - - Value - - - - - Add property... - - - - - Add property set... - - - - - New... - - - - - New property - - - - - New property set - - - - - Create Project - - - - - You can put anything but Site and Building objects in a Building object. -Building object is not allowed to accept Site and Building objects. -Site and Building objects will be removed from the selection. -You can change that in the preferences. - - - - - There is no valid object in the selection. -Building creation aborted. - - - - - Create Building - - - - + Door - - Only axes must be selected - - - - - Create Axis System - - - - - Please select at least one axis - - - - - Axis system components - - - - - Successfully written - - - - - Create material - - - - - Create multi-material - - - - - Name - - - - - Material - - - - - Thickness - - - - - New layer - - - - - Total thickness - - - - - depends on the object - - - - - Unable to retrieve value from object - - - - - Import CSV File - - - - - Export CSV File - - - - - Unable to recognize that file type - - - - - Description - - - - - Unit - - - - - Schedule - - - - - Create Space - - - - - Set text position - - - - - Space boundaries - - - - - Found a shape containing curves, triangulating - - - - - Successfully imported - - - - - Invalid cutplane - - - - - is not closed - - - - - is not valid - - - - - doesn't contain any solid - - - - - contains a non-closed solid - - - - - contains faces that are not part of any solid - - - - - Survey - - - - - Set description - - - - - Clear - - - - - Copy Length - - - - - Copy Area - - - - - Export CSV - - - - - Length - - - - - Area - - - - - Total - - - - - Object doesn't have settable IFC Attributes - - - - - Disabling Brep force flag of object - - - - - Enabling Brep force flag of object - - - - - Add space boundary - - - - - Grouping - - - - - Remove space boundary - - - - - Ungrouping - - - - - Split Mesh - - - - - Mesh to Shape - - - - - All good! No problems found - - - - - Create Component - - - - - Category - - - - - Key - - - - - The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: - - - - - Create IFC properties spreadsheet - - - + + View of @@ -2600,6 +2194,16 @@ Building creation aborted. Section plane settings + + + + + + + + Remove + + Remove highlighted objects from the list above @@ -2666,6 +2270,7 @@ Building creation aborted. + Center @@ -2676,36 +2281,767 @@ Building creation aborted. - - Cutting + + Frame - - Cut Plane + + Create Frame - - Cut Plane options + + Crossing point not found in profile. - - Which side to cut + + Window - - Behind + + + + Create Window - - Front + + Choose a face on an existing object or select a preset + + Window not based on sketch. Window not aligned or resized. + + + + + No Width and/or Height constraint in window sketch. Window not resized. + + + + + No window found. Cannot continue. + + + + + Window options + + + + + Auto include in host object + + + + + Sill height + + + + + + + Preset + + + + + This window has no defined opening + + + + + + + Get selected edge + + + + + Unable to create component + + + + + Window elements + + + + + Hole wire + + + + + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire + + + + + Pick selected + + + + + + + + + Add + + + + + Edit + + + + + Create/update component + + + + + Base 2D object + + + + + + Wires + + + + + + Components + + + + + Create new component + + + + + + + Name + + + + + + + Type + + + + + + + Thickness + + + + + + Offset + + + + + Hinge + + + + + Opening mode + + + + + + + default + + + + + If this is checked, the default Frame value of this window will be added to the value entered here + + + + + If this is checked, the default Offset value of this window will be added to the value entered here + + + + + Press to retrieve the selected edge + + + + + Invert opening direction + + + + + Invert hinge position + + + + + Shapes elevation + + + + + Choose which field provides shapes elevations: + + + + + No shape found in this file + + + + + Shapefile module not found + + + + + The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + + + + + Error: Unable to download from: + + + + + Could not download shapefile module. Aborting. + + + + + Shapefile module not downloaded. Aborting. + + + + + Shapefile module not found. Aborting. + + + + + The shapefile library can be downloaded from the following URL and installed in your macros folder: + + + + + Structure + + + + + + Beam + + + + + + Column + + + + + Create Structures From Selection + + + + + Please select the base object first and then the edges to use as extrusion paths + + + + + Create Structural System + + + + + Please select at least an axis object + + + + + + Create Structure + + + + + First point of the beam + + + + + Base point of column + + + + + + Next point + + + + + Structure options + + + + + Drawing mode + + + + + + + Category + + + + + + + + Length + + + + + + + Width + + + + + + + Height + + + + + Switch L/H + + + + + Switch L/W + + + + + + Con&tinue + + + + + Error: The base shape couldn't be extruded along this tool object + + + + + + This mesh is an invalid solid + + + + + + Facemaker returned an error + + + + + Node Tools + + + + + Reset nodes + + + + + Edit nodes + + + + + Extend nodes + + + + + Extends the nodes of this element to reach the nodes of another element + + + + + Connect nodes + + + + + Connects nodes of this element with the nodes of another element + + + + + Toggle all nodes + + + + + Toggles all structural nodes of the document on/off + + + + + Extrusion Tools + + + + + + Select tool... + + + + + Select object or edges to be used as a Tool (extrusion path) + + + + + + Choose another Structure object: + + + + + + The chosen object is not a Structure + + + + + + The chosen object has no structural nodes + + + + + + One of these objects has more than 2 nodes + + + + + + Unable to find a suitable intersection point + + + + + Intersection found. + + + + + + Intersection found. + + + + + Done + + + + + + Couldn't compute a shape + + + + + Page + + + + + + Create Panel + + + + + Create Panel Cut + + + + + Create Panel Sheet + + + + + Error computing shape of + + + + + Tools + + + + + Edit views positions + + + + + This object has no face + + + + + + + + Error: Couldn't determine character encoding + + + + + + + + Successfully written + + + + + Only axes must be selected + + + + + Create Axis System + + + + + Please select at least one axis + + + + + + + Axes + + + + + Axis system components + + + + + Curtain Wall + + + + + + Please select only one base object or none + + + + + + Create Curtain Wall + + + + + Create profile + + + + + Profile settings + + + + + Create Profile + + + + + Profile + + + + + Create material + + + + + Create multi-material + + + + + + Material + + + + + New layer + + + + + Total thickness + + + + + depends on the object + + + + + Truss + + + + + + Create Truss + + + + + + Found a shape containing curves, triangulating + + + + + Successfully imported + + + + + Couldn't locate IfcOpenShell + + + + + IfcOpenShell not found or disabled, falling back on internal parser. + + + + + IFC Schema not found, IFC import disabled. + + + + + Error: IfcOpenShell is not installed + + + + + Error: your IfcOpenShell version is too old + + + + + Create Space + + + + + + + Please select a base object + + + + + Set text position + + + + + Space boundaries + + + + + + + Arch + + + + + You can put anything but Site and Building objects in a Building object. + +Building object is not allowed to accept Site and Building objects. + +Site and Building objects will be removed from the selection. + +You can change that in the preferences. + + + + + There is no valid object in the selection. + +Building creation aborted. + + + + + Create Building + + + + Create Pipe @@ -2771,6 +3107,7 @@ Building creation aborted. + Common vertex not found @@ -2786,301 +3123,132 @@ Building creation aborted. - - Truss + + Create Axis - - Please select only one base object or none + + Distances (mm) and angles (deg) between axes - - Create Truss + + Axis - - Shapes elevation + + Distance - - Choose which field provides shapes elevations: + + Angle - - No shape found in this file + + Label - - Shapefile module not found + + + Create Roof - - The shapefile python library was not found on your system. Would you like to download it now from <a href="https://github.com/GeospatialPython/pyshp">https://github.com/GeospatialPython/pyshp</a>? It will be placed in your macros folder. + + + Unable to create a roof - - Error: Unable to download from: + + Roof - - Could not download shapefile module. Aborting. + + Parameters of the roof profiles : +* Angle : slope in degrees relative to the horizontal. +* Run : horizontal distance between the wall and the ridge. +* Thickness : thickness of the roof. +* Overhang : horizontal distance between the eave and the wall. +* Height : height of the ridge above the base (calculated automatically). +* IdRel : Id of the relative profile used for automatic calculations. +--- +If Angle = 0 and Run = 0 then the profile is identical to the relative profile. +If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. +If Run = 0 then the run is calculated so that the height is the same as the relative profile. - - Shapefile module not downloaded. Aborting. + + Id - - Shapefile module not found. Aborting. + + Angle (deg) - - The shapefile library can be downloaded from the following URL and installed in your macros folder: + + Run (mm) - - Window + + IdRel - - Create Window + + Thickness (mm) - - Choose a face on an existing object or select a preset + + Overhang (mm) - - Window not based on sketch. Window not aligned or resized. + + Height (mm) - - No Width and/or Height constraint in window sketch. Window not resized. + + Create Project - - No window found. Cannot continue. + + You can put anything but the following objects: Site, Building, and Floor - in a Floor object. + +Floor object is not allowed to accept Site, Building, or Floor objects. + +Site, Building, and Floor objects will be removed from the selection. + +You can change that in the preferences. - - Window options + + There is no valid object in the selection. + +Floor creation aborted. - - Auto include in host object - - - - - Sill height - - - - - Preset - - - - - This window has no defined opening - - - - - Get selected edge - - - - - Unable to create component - - - - - Window elements - - - - - Hole wire - - - - - The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - - - - - Pick selected - - - - - Edit - - - - - Create/update component - - - - - Base 2D object - - - - - Wires - - - - - Create new component - - - - - Offset - - - - - Hinge - - - - - Opening mode - - - - - + default - - - - - If this is checked, the default Frame value of this window will be added to the value entered here - - - - - If this is checked, the default Offset value of this window will be added to the value entered here - - - - - Press to retrieve the selected edge - - - - - Invert opening direction - - - - - Invert hinge position - - - - - Frame - - - - - Create Frame - - - - - Crossing point not found in profile. - - - - - This exporter can currently only export one site object - - - - - Error: Space '%s' has no Zone. Aborting. - - - - - Create Stairs - - - - - You must select a base shape object and optionally a mesh object - - - - - Create Equipment - - - - - You must select exactly one base object - - - - - The selected object must be a mesh - - - - - This mesh has more than 1000 facets. - - - - - This operation can take a long time. Proceed? - - - - - The mesh has more than 500 facets. This will take a couple of minutes... - - - - - Create 3 views - - - - - Error: Couldn't determine character encoding + + Create Floor + Create Rebar @@ -3090,11 +3258,6 @@ Building creation aborted. Please select a base face on a structural object - - - Arch - - Create Grid @@ -3175,505 +3338,6 @@ Building creation aborted. Columns - - - Curtain Wall - - - - - Create Curtain Wall - - - - - Create external reference - - - - - Create profile - - - - - Profile settings - - - - - Create Profile - - - - - Profile - - - - - Please either select only Building objects or nothing at all! -Site is not allowed to accept any other object besides Building. -Other objects will be removed from the selection. -Note: You can change that in the preferences. - - - - - There is no valid object in the selection. -Site creation aborted. - - - - - Create Site - - - - - Wall - - - - - Walls can only be based on Part or Mesh objects - - - - - Create Wall - - - - - First point of wall - - - - - Next point - - - - - Wall options - - - - - Wall Presets... - - - - - This list shows all the MultiMaterials objects of this document. Create some to define wall types. - - - - - Width - - - - - Height - - - - - Alignment - - - - - Left - - - - - Right - - - - - Con&tinue - - - - - Use sketches - - - - - Merge Wall - - - - - The selected wall contains no subwall to merge - - - - - Please select only wall objects - - - - - Merge Walls - - - - - Cannot compute blocks for wall - - - - - This mesh is an invalid solid - - - - - Error: Unable to modify the base object of this wall - - - - - You can put anything but the following objects: Site, Building, and Floor - in a Floor object. -Floor object is not allowed to accept Site, Building, or Floor objects. -Site, Building, and Floor objects will be removed from the selection. -You can change that in the preferences. - - - - - There is no valid object in the selection. -Floor creation aborted. - - - - - Create Floor - - - - - Couldn't locate IfcOpenShell - - - - - IfcOpenShell not found or disabled, falling back on internal parser. - - - - - IFC Schema not found, IFC import disabled. - - - - - Error: IfcOpenShell is not installed - - - - - Error: your IfcOpenShell version is too old - - - - - Create Roof - - - - - Unable to create a roof - - - - - Roof - - - - - Parameters of the roof profiles : -* Angle : slope in degrees relative to the horizontal. -* Run : horizontal distance between the wall and the ridge. -* Thickness : thickness of the roof. -* Overhang : horizontal distance between the eave and the wall. -* Height : height of the ridge above the base (calculated automatically). -* IdRel : Id of the relative profile used for automatic calculations. ---- -If Angle = 0 and Run = 0 then the profile is identical to the relative profile. -If Angle = 0 then the angle is calculated so that the height is the same as the relative profile. -If Run = 0 then the run is calculated so that the height is the same as the relative profile. - - - - - Id - - - - - Angle (deg) - - - - - Run (mm) - - - - - IdRel - - - - - Thickness (mm) - - - - - Overhang (mm) - - - - - Height (mm) - - - - - Structure - - - - - Beam - - - - - Column - - - - - Create Structures From Selection - - - - - Please select the base object first and then the edges to use as extrusion paths - - - - - Create Structural System - - - - - Please select at least an axis object - - - - - Create Structure - - - - - First point of the beam - - - - - Base point of column - - - - - Structure options - - - - - Drawing mode - - - - - Switch L/H - - - - - Switch L/W - - - - - Error: The base shape couldn't be extruded along this tool object - - - - - Facemaker returned an error - - - - - Node Tools - - - - - Reset nodes - - - - - Edit nodes - - - - - Extend nodes - - - - - Extends the nodes of this element to reach the nodes of another element - - - - - Connect nodes - - - - - Connects nodes of this element with the nodes of another element - - - - - Toggle all nodes - - - - - Toggles all structural nodes of the document on/off - - - - - Extrusion Tools - - - - - Select tool... - - - - - Select object or edges to be used as a Tool (extrusion path) - - - - - Choose another Structure object: - - - - - The chosen object is not a Structure - - - - - The chosen object has no structural nodes - - - - - One of these objects has more than 2 nodes - - - - - Unable to find a suitable intersection point - - - - - Intersection found. - - - - - - Intersection found. - - - - - Done - - - - - Couldn't compute a shape - - - - - Create Axis - - - - - Distances (mm) and angles (deg) between axes - - - - - Axis - - - - - Distance - - - - - Angle - - - - - Label - - - - - pycollada not found, collada support is disabled. - - - - - file %s successfully created. - - Precast elements @@ -3805,43 +3469,530 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - - Page + + Cutting - - Create Panel + + Cut Plane - - Create Panel Cut + + Cut Plane options - - Create Panel Sheet + + Which side to cut - - Error computing shape of + + Behind - - Tools + + Front - - Edit views positions + + Wall - - This object has no face + + Walls can only be based on Part or Mesh objects + + + + + + + Create Wall + + + + + First point of wall + + + + + Wall options + + + + + Wall Presets... + + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + + Alignment + + + + + Left + + + + + Right + + + + + Use sketches + + + + + Merge Wall + + + + + The selected wall contains no subwall to merge + + + + + + Please select only wall objects + + + + + Merge Walls + + + + + Cannot compute blocks for wall + + + + + Error: Unable to modify the base object of this wall + + + + + You must select a base shape object and optionally a mesh object + + + + + Create Equipment + + + + + You must select exactly one base object + + + + + The selected object must be a mesh + + + + + This mesh has more than 1000 facets. + + + + + This operation can take a long time. Proceed? + + + + + The mesh has more than 500 facets. This will take a couple of minutes... + + + + + Create 3 views + + + + + Unable to retrieve value from object + + + + + Import CSV File + + + + + + Export CSV File + + + + + Unable to recognize that file type + + + + + + + Description + + + + + + + + Value + + + + + + + Unit + + + + + Schedule + + + + + Error computing the shape of this object + + + + + has no solid + + + + + has an invalid shape + + + + + has a null shape + + + + + Toggle subcomponents + + + + + Closing Sketch edit + + + + + Component + + + + + Components of this object + + + + + Base component + + + + + Additions + + + + + Subtractions + + + + + Objects + + + + + Fixtures + + + + + Group + + + + + Hosts + + + + + Edit IFC properties + + + + + Edit standard code + + + + + Property + + + + + Add property... + + + + + Add property set... + + + + + New... + + + + + New property + + + + + New property set + + + + + pycollada not found, collada support is disabled. + + + + + file %s successfully created. + + + + + Create external reference + + + + + Invalid cutplane + + + + + is not closed + + + + + is not valid + + + + + doesn't contain any solid + + + + + contains a non-closed solid + + + + + contains faces that are not part of any solid + + + + + Survey + + + + + Set description + + + + + Clear + + + + + Copy Length + + + + + Copy Area + + + + + Export CSV + + + + + Area + + + + + Total + + + + + Object doesn't have settable IFC Attributes + + + + + Disabling Brep force flag of object + + + + + + Enabling Brep force flag of object + + + + + Add space boundary + + + + + Grouping + + + + + Remove space boundary + + + + + Ungrouping + + + + + Split Mesh + + + + + Mesh to Shape + + + + + All good! No problems found + + + + + + Create Component + + + + + Key + + + + + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: + + + + + Create IFC properties spreadsheet + + + + + BuildingPart + + + + + Create BuildingPart + + + + + + This exporter can currently only export one site object + + + + + Error: Space '%s' has no Zone. Aborting. + + + + + Create Stairs + + + + + Please either select only Building objects or nothing at all! + +Site is not allowed to accept any other object besides Building. + +Other objects will be removed from the selection. + +Note: You can change that in the preferences. + + + + + There is no valid object in the selection. + +Site creation aborted. + + + + + Create Site @@ -3853,7 +4004,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates 3 views (top, front, side) from a mesh-based object @@ -3866,7 +4017,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Adds the selected components to the active object @@ -3879,7 +4030,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a set of axes @@ -3892,7 +4043,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates an axis system from a set of axes @@ -3900,7 +4051,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_AxisTools - + + Axis tools @@ -3913,7 +4065,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a building object including selected objects. @@ -3926,7 +4078,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a BuildingPart object including selected objects @@ -3939,7 +4091,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Checks the selected objects for problems @@ -3952,7 +4104,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Clones an object as an undefined architectural component @@ -3965,7 +4117,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Closes holes in open shapes, turning them solids @@ -3978,7 +4130,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates an undefined architectural component @@ -3991,7 +4143,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a curtain wall object from selected line or from scratch @@ -4004,7 +4156,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Cut an object with a line @@ -4017,7 +4169,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Cut an object with a plane @@ -4030,7 +4182,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates an equipment object from a selected object (Part or Mesh) @@ -4043,7 +4195,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a fence object from a selected section, post and path @@ -4056,7 +4208,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a Building Part object that represents a level, including selected objects @@ -4069,7 +4221,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a frame object from a planar 2D object (the extrusion path(s)) and a profile. Make sure objects are selected in that order. @@ -4082,7 +4234,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a customizable grid object @@ -4155,7 +4307,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a spreadsheet to store IFC properties of an object. @@ -4168,7 +4320,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates or edits the material definition of a selected object. @@ -4176,7 +4328,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_MaterialTools - + + Material tools @@ -4189,7 +4342,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Merges the selected walls, if possible @@ -4202,7 +4355,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Turns selected meshes into Part Shape objects @@ -4215,7 +4368,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates or edits multi-materials @@ -4228,7 +4381,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Nests a series of selected shapes in a container @@ -4241,7 +4394,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) @@ -4249,7 +4402,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_PanelTools - + + Panel tools @@ -4262,7 +4416,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates 2D views of selected panels @@ -4275,7 +4429,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a 2D sheet which can contain panel cuts @@ -4288,7 +4442,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a pipe object from a given Wire or Line @@ -4301,7 +4455,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a connector between 2 or 3 selected pipes @@ -4309,7 +4463,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_PipeTools - + + Pipe tools @@ -4322,7 +4477,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a profile object @@ -4335,7 +4490,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a project entity aggregating the selected sites. @@ -4348,7 +4503,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a Reinforcement bar from the selected face of solid object and/or a sketch @@ -4361,7 +4516,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -4374,7 +4529,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates an external reference object @@ -4387,7 +4542,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Remove the selected components from their parents, or create a hole in a component @@ -4400,7 +4555,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Removes cubic shapes from Arch components @@ -4413,7 +4568,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a roof object from the selected wire. @@ -4426,7 +4581,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a schedule to collect data from the model @@ -4439,7 +4594,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a section plane object, including the selected objects @@ -4452,7 +4607,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Selects all non-manifold meshes from the document or from the selected groups @@ -4465,7 +4620,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a site object including selected objects. @@ -4478,12 +4633,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a space object from selected boundary objects - + Creates a stairs object @@ -4496,7 +4651,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Splits selected meshes into independent components @@ -4517,7 +4672,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Create a structural system object from a selected structure and axis @@ -4530,7 +4685,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -4538,7 +4693,8 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_StructureTools - + + Structure tools @@ -4551,7 +4707,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Create multiple Arch Structure objects from a selected base, using each selected edge as an extrusion path @@ -4564,7 +4720,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Starts survey @@ -4577,7 +4733,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Force an object to be exported as Brep or not @@ -4590,7 +4746,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Shows or hides the subcomponents of this object @@ -4603,7 +4759,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a truss object from selected line or from scratch @@ -4616,7 +4772,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -4624,12 +4780,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Arch_Window - + Window - + Creates a window object from a selected object (wire, rectangle or sketch) @@ -4637,20 +4793,25 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Draft - - Writing camera position - - - + + + Draft + + Import-Export + + + Writing camera position + + Workbench @@ -4685,52 +4846,57 @@ If Run = 0 then the run is calculated so that the height is the same as the rela - + Arch tools - + Draft creation tools - + Draft annotation tools - + Draft modification tools - + + &Arch - + + Utilities - + + + + &Draft - + Creation - + Annotation - + Modification diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 399a3cac13..eaec91cbf9 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -4,376 +4,253 @@ App::Property - - The start point of this line. - - - - - The end point of this line. - - - - - The length of this line. - - - - - Radius to use to fillet the corner. - - - - - The base object that will be duplicated - - - - - The type of array to create. -- Ortho: places the copies in the direction of the global X, Y, Z axes. -- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. -- Circular: places the copies in concentric circular layers around the base object. - - - - - Specifies if the copies should be fused together if they touch each other (slower) - - - - - Number of copies in X direction - - - - - Number of copies in Y direction - - - - - Number of copies in Z direction - - - - - Distance and orientation of intervals in X direction - - - - - Distance and orientation of intervals in Y direction - - - - - Distance and orientation of intervals in Z direction - - - - - The axis direction around which the elements in a polar or a circular array will be created - - - - - Center point for polar and circular arrays. -The 'Axis' passes through this point. - - - - - The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. -Its placement, position and rotation, will be used when creating polar and circular arrays. -Leave this property empty to be able to set 'Axis' and 'Center' manually. - - - - - Number of copies in the polar direction - - - - - Distance and orientation of intervals in 'Axis' direction - - - - - Angle to cover with copies - - - - - Distance between circular layers - - - - - Distance between copies in the same circular layer - - - - - Number of circular layers. The 'Base' object counts as one layer. - - - - - A parameter that determines how many symmetry planes the circular array will have. - - - - - Total number of elements in the array. -This property is read-only, as the number depends on the parameters of the array. - - - - - Show the individual array elements (only for Link arrays) - - - - + The components of this block - - The placement of this object + + Linked faces - - Length of the rectangle + + Specifies if splitter lines must be removed - - Height of the rectangle + + An optional extrusion value to be applied to all faces - - Radius to use to fillet the corners + + An optional offset value to be applied to all faces - - Size of the chamfer to give to the corners + + This specifies if the shapes sew - + + The area of the faces of this Facebinder + + + + + Start angle of the elliptical arc + + + + + End angle of the elliptical arc + + (for a full circle, give it same value as First Angle) + + + + + Minor radius of the ellipse + + + + + Major radius of the ellipse + + + + + + + Create a face - - Horizontal subdivisions of this rectangle + + Area of this object - - Vertical subdivisions of this rectangle + + The placement of this object - + + The linked object + + + + + Projection direction + + + + + The width of the lines inside this object + + + + + The size of the texts inside this object + + + + + The spacing between lines of text + + + + + The color of the projected objects + + + + + Shape Fill Style + + + + + Line Style + + + + + If checked, source objects are displayed regardless of being visible in the 3D model + + + + + The points of the B-spline + + + + + If the B-spline is closed or not + + + + + Create a face if this spline is closed + + + + + + + + + The area of this object - - The base object that will be duplicated. + + Parameterization factor - - The object along which the copies will be distributed. It must contain 'Edges'. - - - - - Number of copies to create. - - - - - Rotation factor of the twisted array. - - - - - The normal direction of the text of the dimension - - - - - The object measured by this dimension object - - - - - The object, and specific subelements of it, -that this dimension object is measuring. - -There are various possibilities: -- An object, and one of its edges. -- An object, and two of its vertices. -- An arc object, and its edge. - - - - - A point through which the dimension line, or an extrapolation of it, will pass. - -- For linear dimensions, this property controls how close the dimension line -is to the measured object. -- For radial dimensions, this controls the direction of the dimension line -that displays the measured radius or diameter. -- For angular dimensions, this controls the radius of the dimension arc -that displays the measured angle. - - - - - Starting point of the dimension line. - -If it is a radius dimension it will be the center of the arc. -If it is a diameter dimension it will be a point that lies on the arc. - - - - - Ending point of the dimension line. - -If it is a radius or diameter dimension -it will be a point that lies on the arc. - - - - - The direction of the dimension line. -If this remains '(0,0,0)', the direction will be calculated automatically. - - - - - The value of the measurement. - -This property is read-only because the value is calculated -from the 'Start' and 'End' properties. - -If the 'Linked Geometry' is an arc or circle, this 'Distance' -is the radius or diameter, depending on the 'Diameter' property. - - - - - When measuring circular arcs, it determines whether to display -the radius or the diameter value - - - - - Starting angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. - - - - - Ending angle of the dimension line (circular arc). -The arc is drawn counter-clockwise. - - - - - The center point of the dimension line, which is a circular arc. - -This is normally the point where two line segments, or their extensions -intersect, resulting in the measured 'Angle' between them. - - - - - The value of the measurement. - -This property is read-only because the value is calculated from -the 'First Angle' and 'Last Angle' properties. - - - - - The placement of the base point of the first line - - - - - The text displayed by this object. -It is a list of strings; each element in the list will be displayed in its own line. - - - - + Start angle of the arc - - End angle of the arc (for a full circle, give it same value as First Angle) + + End angle of the arc (for a full circle, + give it same value as First Angle) - + Radius of the circle - + + The vertices of the wire + + + + + If the wire is closed or not + + + + + The base object is the wire, it's formed from 2 objects + + + + + The tool object is the wire, it's formed from 2 objects + + + + + The start point of this line + + + + + The end point of this line + + + + + The length of this line + + + + + + + Radius to use to fillet the corners + + + + + + + Size of the chamfer to give to the corners + + + + + Create a face if this object is closed + + + + + The number of subdivisions of each edge + + + + Number of faces - + Radius of the control circle - + How the polygon must be drawn from the control circle - - X Location - - - - - Y Location - - - - - Z Location - - - - - The objects that are part of this layer - - - - + The position of the tip of the leader line. This point can be decorated with an arrow or another symbol. - + Object, and optionally subelement, whose properties will be displayed as 'Text', depending on 'Label Type'. @@ -381,7 +258,7 @@ as 'Text', depending on 'Label Type'. - + The list of points defining the leader line; normally a list of three points. The first point should be the position of the text, that is, the 'Placement', @@ -394,7 +271,7 @@ can be set as a list of arbitrary points. - + The direction of the straight segment of the leader line. If 'Custom' is chosen, the points of the leader can be specified by @@ -402,7 +279,7 @@ assigning a custom list to the 'Points' attribute. - + The length of the straight segment of the leader line. This is an oriented distance; if it is negative, the line will be drawn @@ -411,17 +288,17 @@ depending on the value of 'Straight Direction'. - + The placement of the 'Text' element in 3D space - + The text to display when 'Label Type' is set to 'Custom' - + The text displayed by this label. This property is read-only, as the final text depends on 'Label Type', @@ -430,7 +307,7 @@ The 'Custom Text' is displayed only if 'Label Type' is set t - + The type of information displayed by this label. If 'Custom' is chosen, the contents of 'Custom Text' will be used. @@ -442,273 +319,317 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN&ap - - Text string + + The objects included in this clone - - Font file name + + The scale factor of this clone - - Height of text + + If Clones includes several objects, +set True for fusion or False for compound - - Inter-character spacing + + The base object used by this object - - Fill letters with faces + + The PAT file used by this object - + + The pattern name used by this object + + + + + The pattern scale used by this object + + + + + The pattern rotation used by this object + + + + + If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) + + + + Force sync pattern placements even when array elements are expanded - + Show the individual array elements - + + + The base object that will be duplicated + + + + + The type of array to create. +- Ortho: places the copies in the direction of the global X, Y, Z axes. +- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis. +- Circular: places the copies in concentric circular layers around the base object. + + + + + Specifies if the copies should be fused together if they touch each other (slower) + + + + + Number of copies in X direction + + + + + Number of copies in Y direction + + + + + Number of copies in Z direction + + + + + Distance and orientation of intervals in X direction + + + + + Distance and orientation of intervals in Y direction + + + + + Distance and orientation of intervals in Z direction + + + + + The axis direction around which the elements in a polar or a circular array will be created + + + + + Center point for polar and circular arrays. +The 'Axis' passes through this point. + + + + + The axis object that overrides the value of 'Axis' and 'Center', for example, a datum line. +Its placement, position and rotation, will be used when creating polar and circular arrays. +Leave this property empty to be able to set 'Axis' and 'Center' manually. + + + + + Number of copies in the polar direction + + + + + Distance and orientation of intervals in 'Axis' direction + + + + + Angle to cover with copies + + + + + Distance between circular layers + + + + + Distance between copies in the same circular layer + + + + + Number of circular layers. The 'Base' object counts as one layer. + + + + + A parameter that determines how many symmetry planes the circular array will have. + + + + + Total number of elements in the array. +This property is read-only, as the number depends on the parameters of the array. + + + + + + + + Show the individual array elements (only for Link arrays) + + + + + Text string + + + + + Font file name + + + + + Height of text + + + + + Inter-character spacing + + + + + Fill letters with faces + + + + + The start point of this line. + + + + + The end point of this line. + + + + + The length of this line. + + + + + Radius to use to fillet the corner. + + + + Base object that will be duplicated - + Object containing points used to distribute the base object, for example, a sketch or a Part compound. The sketch or compound must contain at least one explicit point or vertex object. - + Total number of elements in the array. This property is read-only, as the number depends on the points contained within 'Point Object'. - + + Additional placement, shift and rotation, that will be applied to each copy - - The points of the B-spline + + + General scaling factor that affects the annotation consistently +because it scales the text, and the line decorations, if any, +in the same proportion. - - If the B-spline is closed or not + + + Annotation style to apply to this object. +When using a saved style some of the view properties will become read-only; +they will only be editable by changing the style through the 'Annotation style editor' tool. - - Create a face if this spline is closed + + The base object that will be duplicated. - - Parameterization factor + + + The object along which the copies will be distributed. It must contain 'Edges'. - - The base object this 2D view must represent + + Number of copies to create. - - The projection vector of this object + + Rotation factor of the twisted array. - - The way the viewed object must be projected - - - - - The indices of the faces to be projected in Individual Faces mode - - - - - Show hidden lines - - - - - Fuse wall and structure objects of same type and material - - - - - Tessellate Ellipses and B-splines into line segments - - - - - For Cutlines and Cutfaces modes, this leaves the faces at the cut location - - - - - Length of line segments if tessellating Ellipses or B-splines into line segments - - - - - If this is True, this object will include only visible objects - - - - - A list of exclusion points. Any edge touching any of those points will not be drawn. - - - - - If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - - - - - If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - - - - - This object will be recomputed only if this is True. - - - - - Start angle of the elliptical arc - - - - - End angle of the elliptical arc - (for a full circle, give it same value as First Angle) - - - - - Minor radius of the ellipse - - - - - Major radius of the ellipse - - - - - Area of this object - - - - - The base object used by this object - - - - - The PAT file used by this object - - - - - The pattern name used by this object - - - - - The pattern scale used by this object - - - - - The pattern rotation used by this object - - - - - If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces) - - - - - The points of the Bezier curve - - - - - The degree of the Bezier function - - - - - Continuity - - - - - If the Bezier curve should be closed or not - - - - - Create a face if this curve is closed - - - - - The length of this object - - - - + List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. - + Number of copies to create - + Additional translation that will be applied to each copy. This is useful to adjust for the difference between shape centre and shape reference point. - + Alignment vector for 'Tangent' mode - + Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode - + Direction of the local Z axis when 'Force Vertical' is true - + Method to orient the copies along the path. - Original: X is curve tangent, Y is normal, and Z is the cross product. - Frenet: aligns the object following the local coordinate system along the path. @@ -718,393 +639,548 @@ To get better results with 'Original' or 'Tangent' you may h - + Orient the copies along the path depending on the 'Align Mode'. Otherwise the copies will have the same orientation as the original Base object. - - The linked object + + X Location - - Projection direction + + Y Location - - The width of the lines inside this object + + Z Location - - The size of the texts inside this object + + The placement of the base point of the first line - - The spacing between lines of text + + The text displayed by this object. +It is a list of strings; each element in the list will be displayed in its own line. - - The color of the projected objects + + The points of the Bezier curve - - Shape Fill Style + + The degree of the Bezier function - - Line Style + + Continuity - - If checked, source objects are displayed regardless of being visible in the 3D model + + If the Bezier curve should be closed or not - - Linked faces + + Create a face if this curve is closed - - Specifies if splitter lines must be removed + + The length of this object - - An optional extrusion value to be applied to all faces + + The base object this 2D view must represent - - An optional offset value to be applied to all faces + + The projection vector of this object - - This specifies if the shapes sew + + The way the viewed object must be projected - - The area of the faces of this Facebinder + + The indices of the faces to be projected in Individual Faces mode - - The objects included in this clone + + Show hidden lines - - The scale factor of this clone + + Fuse wall and structure objects of same type and material - - If Clones includes several objects, -set True for fusion or False for compound + + Tessellate Ellipses and B-splines into line segments - - General scaling factor that affects the annotation consistently -because it scales the text, and the line decorations, if any, -in the same proportion. + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location - - Annotation style to apply to this object. -When using a saved style some of the view properties will become read-only; -they will only be editable by changing the style through the 'Annotation style editor' tool. + + Length of line segments if tessellating Ellipses or B-splines + into line segments - - The vertices of the wire + + If this is True, this object will include only visible objects - - If the wire is closed or not + + A list of exclusion points. Any edge touching any of those points will not be drawn. - - The base object is the wire, it's formed from 2 objects + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property - - The tool object is the wire, it's formed from 2 objects + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property - - The start point of this line + + This object will be recomputed only if this is True. - - The end point of this line + + The objects that are part of this layer - - The length of this line + + Length of the rectangle - - Create a face if this object is closed + + Height of the rectangle - - The number of subdivisions of each edge + + Horizontal subdivisions of this rectangle - + + Vertical subdivisions of this rectangle + + + + + The normal direction of the text of the dimension + + + + + The object measured by this dimension object + + + + + The object, and specific subelements of it, +that this dimension object is measuring. + +There are various possibilities: +- An object, and one of its edges. +- An object, and two of its vertices. +- An arc object, and its edge. + + + + + A point through which the dimension line, or an extrapolation of it, will pass. + +- For linear dimensions, this property controls how close the dimension line +is to the measured object. +- For radial dimensions, this controls the direction of the dimension line +that displays the measured radius or diameter. +- For angular dimensions, this controls the radius of the dimension arc +that displays the measured angle. + + + + + Starting point of the dimension line. + +If it is a radius dimension it will be the center of the arc. +If it is a diameter dimension it will be a point that lies on the arc. + + + + + Ending point of the dimension line. + +If it is a radius or diameter dimension +it will be a point that lies on the arc. + + + + + The direction of the dimension line. +If this remains '(0,0,0)', the direction will be calculated automatically. + + + + + The value of the measurement. + +This property is read-only because the value is calculated +from the 'Start' and 'End' properties. + +If the 'Linked Geometry' is an arc or circle, this 'Distance' +is the radius or diameter, depending on the 'Diameter' property. + + + + + When measuring circular arcs, it determines whether to display +the radius or the diameter value + + + + + Starting angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + + + + + Ending angle of the dimension line (circular arc). +The arc is drawn counter-clockwise. + + + + + The center point of the dimension line, which is a circular arc. + +This is normally the point where two line segments, or their extensions +intersect, resulting in the measured 'Angle' between them. + + + + + The value of the measurement. + +This property is read-only because the value is calculated from +the 'First Angle' and 'Last Angle' properties. + + + + + + Line width + + + + + + Line color + + + + + If it is true, the objects contained within this layer will adopt the line color of the layer + + + + + If it is true, the objects contained within this layer will adopt the shape color of the layer + + + + + If it is true, the print color will be used when objects in this layer are placed on a TechDraw page + + + + + The line color of the objects contained within this layer + + + + + The shape color of the objects contained within this layer + + + + + The line width of the objects contained within this layer + + + + + The draw style of the objects contained within this layer + + + + + The transparency of the objects contained within this layer + + + + + The line color of the objects contained within this layer, when used on a TechDraw page + + + + + + The size of the text + + + + + + The font of the text + + + + + + + The vertical alignment of the text + + + + + + Text color + + + + + + Line spacing (relative to font size) + + + + + The maximum number of characters on each line of the text box + + + + + The size of the arrow + + + + + The type of arrow of this label + + + + + The type of frame around the text of this object + + + + + Display a leader line or not + + + + Font name - + Font size - + Spacing between text and dimension line - + Rotate the dimension text 180 degrees - + Text Position. Leave '(0,0,0)' for automatic position - + Text override. Write '$dim' so that it is replaced by the dimension length. - + The number of decimals to show - + Show the unit suffix - + A unit to express the measurement. Leave blank for system default. Use 'arch' to force US arch notation - + Arrow size - + Arrow type - + Rotate the dimension arrows 180 degrees - + The distance the dimension line is extended past the extension lines - + Length of the extension lines - + Length of the extension line beyond the dimension line - + Shows the dimension line and arrows - - If it is true, the objects contained within this layer will adopt the line color of the layer - - - - - If it is true, the objects contained within this layer will adopt the shape color of the layer - - - - - If it is true, the print color will be used when objects in this layer are placed on a TechDraw page - - - - - The line color of the objects contained within this layer - - - - - The shape color of the objects contained within this layer - - - - - The line width of the objects contained within this layer - - - - - The draw style of the objects contained within this layer - - - - - The transparency of the objects contained within this layer - - - - - The line color of the objects contained within this layer, when used on a TechDraw page - - - - - Line width - - - - - Line color - - - - + Defines an SVG pattern. - + Defines the size of the SVG pattern. - - - The size of the text - - - - - The font of the text - - - - - The vertical alignment of the text - - - - - Text color - - - - - Line spacing (relative to font size) - - - - - The maximum number of characters on each line of the text box - - - - - The size of the arrow - - - - - The type of arrow of this label - - - - - The type of frame around the text of this object - - - - - Display a leader line or not - - Draft - - Point object doesn't have a discrete point, it cannot be used for an array. + + Download of dxf libraries failed. +Please install the dxf Library addon manually +from menu Tools -> Addon Manager - + + You must choose a base object before using this command + + + + + Clone + + + + + + Slope + + + + + Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + + + + + Delete original objects + + + + + Create chamfer + + + + + Save style + + + + + Name of this new style: + + + + + Warning + + + + + Name exists. Overwrite? + + + + + Error: json module not found. Unable to save style + + + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - - Writing camera position - - - - - Writing objects shown/hidden state - - - - - Draft - - - - - Import-Export + + + Point object doesn't have a discrete point, it cannot be used for an array. @@ -1118,7 +1194,7 @@ beyond the dimension line - + Toggles Visual Aid Dimensions On/Off @@ -1128,17 +1204,48 @@ beyond the dimension line - + Toggles Constrain to Working Plane On/Off - + + + + + + Draft + + + + + + + + Import-Export + + + + + Writing camera position + + + + + Writing objects shown/hidden state + + + + + + True - + + + False @@ -1192,68 +1299,6 @@ beyond the dimension line Create a clone - - - Download of dxf libraries failed. -Please install the dxf Library addon manually -from menu Tools -> Addon Manager - - - - - Clone - - - - - Slope - - - - - Save style - - - - - Name of this new style: - - - - - Warning - - - - - Name exists. Overwrite? - - - - - Error: json module not found. Unable to save style - - - - - You must choose a base object before using this command - - - - - Delete original objects - - - - - Create chamfer - - - - - Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - - Draft_AddConstruction @@ -1263,7 +1308,7 @@ from menu Tools -> Addon Manager - + Adds the selected objects to the construction group, and changes their appearance to the construction style. It creates a construction group if it doesn't exist. @@ -1278,7 +1323,7 @@ It creates a construction group if it doesn't exist. - + Add a new group with a given name. @@ -1291,7 +1336,7 @@ It creates a construction group if it doesn't exist. - + Adds a point to an existing Wire or B-spline. @@ -1304,7 +1349,7 @@ It creates a construction group if it doesn't exist. - + Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. @@ -1313,12 +1358,12 @@ Create a group first to use this tool. Draft_AnnotationStyleEditor - + Annotation styles... - + Manage or create annotation styles @@ -1331,7 +1376,7 @@ Create a group first to use this tool. - + Applies the current style defined in the toolbar (line width and colors) to the selected objects and groups. @@ -1344,7 +1389,7 @@ Create a group first to use this tool. - + Creates a circular arc by a center point and a radius. CTRL to snap, SHIFT to constrain. @@ -1358,7 +1403,7 @@ CTRL to snap, SHIFT to constrain. - + Create various types of circular arcs. @@ -1371,7 +1416,7 @@ CTRL to snap, SHIFT to constrain. - + Creates a circular arc by picking 3 points. CTRL to snap, SHIFT to constrain. @@ -1385,7 +1430,7 @@ CTRL to snap, SHIFT to constrain. - + Creates an array from a selected object. By default, it is a 2x2 orthogonal array. Once the array is created its type can be changed @@ -1401,7 +1446,7 @@ to polar or circular, and its properties can be modified. - + Create various types of arrays, including rectangular, polar, circular, path, and point @@ -1414,7 +1459,7 @@ to polar or circular, and its properties can be modified. - + Select a group to add all Draft and Arch objects to. @@ -1427,7 +1472,7 @@ to polar or circular, and its properties can be modified. - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain. @@ -1440,7 +1485,7 @@ to polar or circular, and its properties can be modified. - + Creates an N-degree Bézier curve. The more points you pick, the higher the degree. CTRL to snap, SHIFT to constrain. @@ -1454,7 +1499,7 @@ CTRL to snap, SHIFT to constrain. - + Create various types of Bézier curves. @@ -1467,7 +1512,7 @@ CTRL to snap, SHIFT to constrain. - + Creates a circle (full circular arc). CTRL to snap, ALT to select tangent objects. @@ -1481,7 +1526,7 @@ CTRL to snap, ALT to select tangent objects. - + Creates copies of the selected object, and places the copies in a radial pattern creating various circular layers. @@ -1497,7 +1542,7 @@ The array can be turned into an orthogonal or a polar array by changing its type - + Creates a clone of the selected objects. The resulting clone can be scaled in each of its three directions. @@ -1511,7 +1556,7 @@ The resulting clone can be scaled in each of its three directions. - + Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment. After the curve is created you can go back to edit each control point and set the properties of each knot. CTRL to snap, SHIFT to constrain. @@ -1526,7 +1571,7 @@ CTRL to snap, SHIFT to constrain. - + Removes a point from an existing Wire or B-spline. @@ -1539,7 +1584,7 @@ CTRL to snap, SHIFT to constrain. - + Creates a dimension. - Pick three points to create a simple linear dimension. @@ -1563,7 +1608,7 @@ to turn it into a 'Draft Dimension' object. - + Downgrades the selected objects into simpler shapes. The result of the operation depends on the types of objects, which may be able to be downgraded several times in a row. For example, it explodes the selected polylines into simpler faces, wires, and then edges. It can also subtract faces. @@ -1578,7 +1623,7 @@ For example, it explodes the selected polylines into simpler faces, wires, and t - + Convert bidirectionally between Draft objects and Sketches. Many Draft objects will be converted into a single non-constrained Sketch. However, a single sketch with disconnected traces will be converted into several individual Draft objects. @@ -1593,7 +1638,7 @@ However, a single sketch with disconnected traces will be converted into several - + Creates a 2D projection on a Drawing Workbench page from the selected objects. This command is OBSOLETE since the Drawing Workbench became obsolete in 0.17. Use TechDraw Workbench instead for generating technical drawings. @@ -1608,7 +1653,7 @@ Use TechDraw Workbench instead for generating technical drawings. - + Edits the active object. Press E or ALT+LeftClick to display context menu on supported nodes and on supported objects. @@ -1623,7 +1668,7 @@ on supported nodes and on supported objects. - + Creates an ellipse. CTRL to snap. @@ -1636,7 +1681,7 @@ on supported nodes and on supported objects. - + Creates a facebinder object from selected faces. @@ -1649,7 +1694,7 @@ on supported nodes and on supported objects. - + Creates a fillet between two selected wires or edges. @@ -1657,12 +1702,12 @@ on supported nodes and on supported objects. Draft_FlipDimension - + Flip dimension - + Flip the normal direction of the selected dimensions (linear, radial, angular). If other objects are selected they are ignored. @@ -1676,7 +1721,7 @@ If other objects are selected they are ignored. - + Creates hatches on the faces of a selected object @@ -1689,7 +1734,7 @@ If other objects are selected they are ignored. - + Heal faulty Draft objects saved with an earlier version of the program. If an object is selected it will try to heal that object in particular, otherwise it will try to heal all objects in the active document. @@ -1704,7 +1749,7 @@ otherwise it will try to heal all objects in the active document. - + Joins the selected lines or polylines into a single object. The lines must share a common point at the start or at the end for the operation to succeed. @@ -1718,7 +1763,7 @@ The lines must share a common point at the start or at the end for the operation - + Creates a label, optionally attached to a selected object or subelement. First select a vertex, an edge, or a face of an object, then call this command, @@ -1739,7 +1784,7 @@ will be used to provide information to the label. - + Adds a layer to the document. Objects added to this layer can share the same visual properties such as line color, line width, and shape color. @@ -1753,7 +1798,7 @@ Objects added to this layer can share the same visual properties such as line co - + Creates a 2-point line. CTRL to snap, SHIFT to constrain. @@ -1766,7 +1811,7 @@ Objects added to this layer can share the same visual properties such as line co - + Like the Array tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. @@ -1780,7 +1825,7 @@ A 'Link array' is more efficient when handling many copies but the &ap - + Mirrors the selected objects along a line defined by two points. @@ -1793,7 +1838,7 @@ A 'Link array' is more efficient when handling many copies but the &ap - + Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. @@ -1808,7 +1853,7 @@ CTRL to snap, SHIFT to constrain. - + Offsets of the selected object. It can also create an offset copy of the original object. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. @@ -1823,7 +1868,7 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each - + Creates copies of the selected object, and places the copies in an orthogonal pattern, meaning the copies follow the specified direction in the X, Y, Z axes. @@ -1839,7 +1884,7 @@ The array can be turned into a polar or a circular array by changing its type. - + Creates copies of the selected object along a selected path. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. @@ -1854,7 +1899,7 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj - + Like the PathArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. @@ -1868,7 +1913,7 @@ A 'Link array' is more efficient when handling many copies but the &ap - + Creates copies of the selected object along a selected path, and twists the copies. First select the object, and then select the path. The path can be a polyline, B-spline, Bezier curve, or even edges from other objects. @@ -1883,7 +1928,7 @@ The path can be a polyline, B-spline, Bezier curve, or even edges from other obj - + Like the PathTwistedArray tool, but creates a 'Link array' instead. A 'Link array' is more efficient when handling many copies but the 'Fuse' option cannot be used. @@ -1897,7 +1942,7 @@ A 'Link array' is more efficient when handling many copies but the &ap - + Creates a point object. Click anywhere on the 3D view. @@ -1910,7 +1955,7 @@ A 'Link array' is more efficient when handling many copies but the &ap - + Creates copies of the selected object, and places the copies at the position of various points. The points need to be grouped under a compound of points before using this tool. @@ -1929,7 +1974,7 @@ Select the base object, and then select the compound or the sketch to create the - + Like the PointArray tool, but creates a 'Point link array' instead. A 'Point link array' is more efficient when handling many copies. @@ -1943,7 +1988,7 @@ A 'Point link array' is more efficient when handling many copies. - + Creates copies of the selected object, and places the copies in a polar pattern defined by a center of rotation and its angle. @@ -1959,7 +2004,7 @@ The array can be turned into an orthogonal or a circular array by changing its t - + Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius. CTRL to snap, SHIFT to constrain @@ -1973,7 +2018,7 @@ CTRL to snap, SHIFT to constrain - + Creates a 2-point rectangle. CTRL to snap. @@ -1986,7 +2031,7 @@ CTRL to snap, SHIFT to constrain - + Rotates the selected objects. Choose the center of rotation, then the initial angle, and then the final angle. If the "copy" option is active, it will create rotated copies. CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click. @@ -2001,7 +2046,7 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy. @@ -2015,7 +2060,7 @@ CTRL to snap, SHIFT to constrain, ALT to copy. - + Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. @@ -2028,7 +2073,7 @@ CTRL to snap, SHIFT to constrain, ALT to copy. - + Select the face of solid body to create a working plane on which to sketch Draft objects. You may also select a three vertices or a Working Plane Proxy. @@ -2042,7 +2087,7 @@ You may also select a three vertices or a Working Plane Proxy. - + Sets default styles @@ -2055,7 +2100,7 @@ You may also select a three vertices or a Working Plane Proxy. - + Creates a 2D projection of the selected objects on the XY plane. The initial projection direction is the negative of the current active view direction. You can select individual faces to project, or the entire solid, and also include hidden lines. @@ -2071,7 +2116,7 @@ These projections can be used to create technical drawings with the TechDraw Wor - + Creates a shape from a text string by choosing a specific font and a placement. The closed shapes can be used for extrusions and boolean operations. @@ -2085,7 +2130,7 @@ The closed shapes can be used for extrusions and boolean operations. - + Show the snap toolbar if it is hidden. @@ -2098,7 +2143,7 @@ The closed shapes can be used for extrusions and boolean operations. - + Sets the slope of the selected line by changing the value of the Z value of one of its points. If a polyline is selected, it will apply the slope transformation to each of its segments. @@ -2115,7 +2160,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to points in a circular arc located at multiples of 30 and 45 degree angles. @@ -2128,7 +2173,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the center of a circular arc. @@ -2141,7 +2186,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Show temporary linear dimensions when editing an object and using other snapping methods. @@ -2154,7 +2199,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to endpoints of an edge. @@ -2167,7 +2212,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the extension of an edge. @@ -2180,7 +2225,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the intersection of grid lines. @@ -2193,7 +2238,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the intersection of edges. @@ -2206,7 +2251,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Activates or deactivates all snap methods at once. @@ -2219,7 +2264,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the midpoint of an edge. @@ -2232,7 +2277,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the nearest point of an edge. @@ -2245,7 +2290,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to a direction that is a multiple of 45 degrees from a point. @@ -2258,7 +2303,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to a direction that is parallel to an edge. @@ -2271,7 +2316,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to a direction that is perpendicular to an edge. @@ -2284,7 +2329,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Set snapping to the special points defined inside an object. @@ -2297,7 +2342,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren& - + Restricts snapping to a point in the current working plane. If you select a point outside the working plane, for example, by using other snapping methods, it will snap to that point's projection in the current working plane. @@ -2312,7 +2357,7 @@ it will snap to that point's projection in the current working plane. - + Splits the selected line or polyline into two independent lines or polylines by clicking anywhere along the original object. It works best when choosing a point on a straight segment and not a corner vertex. @@ -2327,7 +2372,7 @@ It works best when choosing a point on a straight segment and not a corner verte - + Stretches the selected objects. Select an object, then draw a rectangle to pick the vertices that will be stretched, then draw a line to specify the distance and direction of stretching. @@ -2342,7 +2387,7 @@ then draw a line to specify the distance and direction of stretching. - + Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools. @@ -2355,7 +2400,7 @@ then draw a line to specify the distance and direction of stretching. - + Creates a multi-line annotation. CTRL to snap. @@ -2368,7 +2413,7 @@ then draw a line to specify the distance and direction of stretching. - + Toggles the Construction mode. When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties. @@ -2382,7 +2427,7 @@ When this is active, the following objects created will be included in the const - + Toggles the Continue mode. When this is active, any drawing tool that is terminated will automatically start again. This can be used to draw several objects one after the other in succession. @@ -2397,7 +2442,7 @@ This can be used to draw several objects one after the other in succession. - + Switches the display mode of selected objects from flatlines to wireframe and back. This is helpful to quickly visualize objects that are hidden by other objects. This is intended to be used with closed shapes and solids, and doesn't affect open wires. @@ -2425,7 +2470,7 @@ This is intended to be used with closed shapes and solids, and doesn't affe - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. @@ -2439,7 +2484,7 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts. - + Upgrades the selected objects into more complex shapes. The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row. For example, it can join the selected objects into one, convert simple edges into parametric polylines, @@ -2455,7 +2500,7 @@ convert closed edges into filled faces and parametric polygons, and merge faces - + Creates a multiple-points line (polyline). CTRL to snap, SHIFT to constrain. @@ -2468,7 +2513,7 @@ convert closed edges into filled faces and parametric polygons, and merge faces - + Converts a selected polyline to a B-spline, or a B-spline to a polyline. @@ -2481,7 +2526,7 @@ convert closed edges into filled faces and parametric polygons, and merge faces - + Creates a proxy object from the current working plane. Once the object is created double click it in the tree view to restore the camera position and objects' visibilities. Then you can use it to save a different camera position and objects' states any time you need. @@ -2499,12 +2544,12 @@ Then you can use it to save a different camera position and objects' states ImportSVG - + Unknown SVG export style, switching to Translated - + The export list contains no object with a valid bounding box @@ -2512,43 +2557,8 @@ Then you can use it to save a different camera position and objects' states Workbench - - Draft creation tools - - - - - Draft annotation tools - - - - - Draft modification tools - - - - - Draft utility tools - - - - - &Drafting - - - - - &Annotation - - - - - &Modification - - - - - &Utilities + + Draft Snap @@ -2567,38 +2577,1230 @@ Then you can use it to save a different camera position and objects' states - - Draft Snap + + Draft creation tools + + + + + Draft annotation tools + + + + + Draft modification tools + + + + + Draft utility tools + + + + + &Drafting + + + + + &Annotation + + + + + &Modification + + + + + &Utilities draft - + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer +To enabled FreeCAD to download these libraries, answer Yes. + + + + + + Select an object to project + + + + + Create 2D view + + + + + Change Style + + + + + Select an object to join + + + + + Join lines + + + + + Selection: + + + + + Add to group + + + + + Ungroup + + + + + Add new group + + + + + Select group + + + + + No new selection. You must select non-empty groups or objects inside groups. + + + + + Autogroup + + + + + + + + + + + None + + + + + Add new Layer + + + + + Add to construction group + + + + + Add a new group with a given name + + + + + Add group + + + + + Group name + + + + + Group + + + + + + Select an object to upgrade + + + + + Upgrade + + + + + Select an object to array + + + + + Array + + + + + Select an object to scale + + + + + Pick base point + + + + + Pick reference distance from base point + + + + + + + + + + + Copy + + + + + + + Scale + + + + + Some subelements could not be scaled. + + + + + Unable to scale object: + + + + + Unable to scale objects: + + + + + This object type cannot be scaled directly. Please use the clone method. + + + + + Pick new distance from base point + + + + + Please select exactly two objects, the base object and the point object, before calling this command. + + + + + Point array + + + + + Pick target point + + + + + Create Label + + + + + + Pick endpoint of leader line + + + + + + Pick text position + + + + + Select an object to move + + + + + Pick start point + + + + + + Pick end point + + + + + Move + + + + + + Some subelements could not be moved. + + + + + Select an object to convert. + + + + + Convert to Sketch + + + + + Convert to Draft + + + + + Convert Draft/Sketch + + + + + + + Layer + + + + + Sketch is too complex to edit: it is suggested to use sketcher default editor + + + + + + Pick ShapeString location point + + + + + + Create ShapeString + + + + + + Bézier curve has been closed + + + + + + + Last point has been removed + + + + + + + + + + + Pick next point + + + + + + Pick next point, or finish (A) or close (O) + + + + + + Create BezCurve + + + + + Click and drag to define next knot + + + + + Click and drag to define next knot, or finish (A) or close (O) + + + + + Flip dimension + + + + + Select an object to edit + + + + + + Pick center point + + + + + + + + + + Pick radius + + + + + Create Polygon (Part) + + + + + Create Polygon + + + + + + Create Point + + + + + + + + Pick first point + + + + + + + + Create Dimension + + + + + Create Dimension (radial) + + + + + Edge too short! + + + + + Edges don't intersect! + + + + + Select faces from existing objects + + + + + + Please select exactly two objects, the base object and the path object, before calling this command. + + + + + Path array + + + + + Pick location point + + + + + Create Text + + + + + + Create Ellipse + + + + + + Pick opposite point + + + + + Select objects to trim or extend + + + + + + Pick distance + + + + + + + Distance + + + + + + + Offset distance + + + + + + Angle + + + + + Offset angle + + + + + Unable to trim these objects, only Draft wires and arcs are supported. + + + + + Unable to trim these objects, too many wires + + + + + These objects don't intersect. + + + + + Too many intersection points. + + + + + Select an object to stretch + + + + + Pick first point of selection rectangle + + + + + Pick opposite point of selection rectangle + + + + + Pick start point of displacement + + + + + Pick end point of displacement + + + + + Turning one Rectangle into a Wire + + + + + Stretch + + + + + Select an object to clone + + + + + Change slope + + + + + Heal + + + + + Create Line + + + + + Create Wire + + + + + Unable to create a Wire from selected objects + + + + + Convert to Wire + + + + + No active Draft Toolbar. + + + + + Construction mode + + + + + Continue mode + + + + + Toggle display mode + + + + + Select a Draft object to edit + + + + + No edit point found for selected object + + + + + Too many objects selected, max number set to: + + + + + : this object is not editable + + + + + Create Plane + + + + + Create Rectangle + + + + + Select an object to mirror + + + + + Pick start point of mirror line + + + + + Mirror + + + + + + Pick end point of mirror line + + + + + Downgrade + + + + + The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead. + + + + + + + + Start angle + + + + + + Pick start angle + + + + + + + + Aperture angle + + + + + Pick aperture + + + + + Create Circle (Part) + + + + + Create Circle + + + + + Create Arc (Part) + + + + + Create Arc + + + + + Pick aperture angle + + + + + + Arc by 3 points + + + + + (ON) + + + + + (OFF) + + + + + Annotation style editor + + + + + Open styles file + + + + + + JSON file (*.json) + + + + + Save styles file + + + + + Select an object to rotate + + + + + Pick rotation center + + + + + + Base angle + + + + + + The base angle you wish to start the rotation from + + + + + + Pick base angle + + + + + + Rotation + + + + + + The amount of rotation you wish to perform. +The final angle will be the base angle plus this amount. + + + + + + Pick rotation angle + + + + + + Rotate + + + + + Main toggle snap + + + + + Midpoint snap + + + + + Perpendicular snap + + + + + Grid snap + + + + + Intersection snap + + + + + Parallel snap + + + + + Endpoint snap + + + + + Angle snap (30 and 45 degrees) + + + + + Arc center snap + + + + + Edge extension snap + + + + + Near snap + + + + + Orthogonal snap + + + + + Special point snap + + + + + Dimension display + + + + + Working plane snap + + + + + Show snap toolbar + + + + + Pick a face, 3 vertices or a WP Proxy to define the drawing plane + + + + + + + + + Current working plane + + + + + Working plane aligned to global placement of + + + + + + + Top + + + + + + + Front + + + + + + + Side + + + + + Dir + + + + + + + + + Offset + + + + + Custom + + + + + Select an object to offset + + + + + Offset only works on one object at a time. + + + + + Cannot offset this object type + + + + + Offset of Bezier curves is currently not supported + + + + + Spline has been closed + + + + + Create B-spline + + + + + + This object does not support possible coincident points, please try again. + + + + + + Active object must have more than two points/nodes + + + + + Selection is not a Knot + + + + + Endpoint of BezCurve can't be smoothed + + + + + Toggle grid + + + + + Fillet radius + + + + + Radius of fillet + + + + + Enter radius. + + + + + Delete original objects: + + + + + Chamfer mode: + + + + + Two elements needed. + + + + + Test object + + + + + Test object removed + + + + + Fillet cannot be created + + + + + Create fillet + + + + + Path twisted array + + + + + Click anywhere on a line to split it. + + + + + Split line + + + + + ShapeString: string has no wires + + + + + + added property 'ExtraPlacement' + + + + + + added view property 'ScaleMultiplier' + + + + + + migrated 'DraftText' type to 'Text' + + + + + , path object doesn't have 'Edges'. + + + + + + + 'PathObj' property will be migrated to 'PathObject' + + + + + Cannot calculate path tangent. Copy not aligned. + + + + + Tangent and normal are parallel. Copy not aligned. + + + + + Cannot calculate path normal, using default. + + + + + Cannot calculate path binormal. Copy not aligned. + + + + + AlignMode {} is not implemented + + + + + + LibreDWG error + + + + + + Converting: + + + + + Conversion successful + + + + + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. + + + + + + ODA File Converter not found + + + + + + QCAD error + + + + + Relative - + + Global + + Continue + Close - - - Copy - - Subelement mode @@ -2645,6 +3847,7 @@ Then you can use it to save a different camera position and objects' states + Select edge @@ -2660,6 +3863,7 @@ Then you can use it to save a different camera position and objects' states + Wipe @@ -2684,31 +3888,11 @@ Then you can use it to save a different camera position and objects' states Draft Command Bar - - - Top - - - - - Front - - - - - Side - - Auto - - - None - - active command: @@ -2725,6 +3909,7 @@ Then you can use it to save a different camera position and objects' states + X @@ -2755,7 +3940,7 @@ Then you can use it to save a different camera position and objects' states - + Enter a new point with the given coordinates @@ -2764,11 +3949,6 @@ Then you can use it to save a different camera position and objects' states Length - - - Angle - - Length of current segment @@ -2780,60 +3960,62 @@ Then you can use it to save a different camera position and objects' states - + Check this to lock the current angle + Radius + Radius of Circle - + Coordinates relative to last point or to coordinate system origin if is the first point to set - + Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - + Filled - + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled - + Finish - + Finishes the current drawing or editing operation - + If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performedinstead of the classic offset @@ -2952,11 +4134,6 @@ Not available if Draft preference option 'Use Part Primitives' is enab Press this button to create the text object, or finish your text with two blank lines - - - Current working plane - - Change default style for new objects @@ -2968,6 +4145,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab + + Autogroup off @@ -2992,11 +4171,6 @@ Not available if Draft preference option 'Use Part Primitives' is enab Arc - - - Rotate - - Point @@ -3007,21 +4181,6 @@ Not available if Draft preference option 'Use Part Primitives' is enab Label - - - Offset - - - - - Distance - - - - - Offset distance - - Trimex @@ -3113,12 +4272,12 @@ Not available if Draft preference option 'Use Part Primitives' is enab - + Select a Font file - + Please enter a font file. @@ -3148,50 +4307,279 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - LibreDWG error + + Solids: - - Converting: + + Faces: - - Conversion successful + + Wires: - - Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. + + Edges: - - ODA File Converter not found + + Vertices: - - QCAD error + + Face - - All Shapes must be coplanar + + Wire - - Selected Shapes must define a plane + + + different types + + Objects have different placements. Distance between the two base points: + + + + + has a different value + + + + + doesn't exist in one of the objects + + + + + %s shares a base with %d other objects. Please check if you want to modify this. + + + + + %s cannot be modified because its placement is readonly. + + + + + Wrong input: unknown document. + + + + + + + + + + + + + + + + + + + No active document. Aborting. + + + This function will be deprecated in + + + + + + Please use + + + + + This function will be deprecated. + + + + + + + + custom + + + + + Unable to convert input into a scale factor + + + + + Set custom scale + + + + + Set custom annotation scale in format x:x, x=x + + + + + Set the scale used by draft annotation tools + + + + + Snap Lock + + + + + Snap Endpoint + + + + + Snap Midpoint + + + + + Snap Center + + + + + Snap Angle + + + + + Snap Intersection + + + + + Snap Perpendicular + + + + + Snap Extension + + + + + Snap Parallel + + + + + Snap Special + + + + + Snap Near + + + + + Snap Ortho + + + + + Snap Grid + + + + + Snap WorkingPlane + + + + + Snap Dimensions + + + + + Toggle Draft Grid + + + + + + + + + + + + + + + + + + Wrong input: object not in document. + + + + + No graphical interface + + + + + Unable to insert new object into a scaled part + + + + + Symbol not implemented. Using a default symbol. + + + + + Visibility off; removed from list: + + + + + image is Null + + + + + filename does not exist on the system or in the resource file + + + + + unable to load texture + + + + + Does not have 'ViewObject.RootNode'. + + Object must be a closed shape @@ -3208,6 +4596,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Upgrade: Unknown force method: @@ -3258,6 +4647,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Found several non-treatable objects: creating compound @@ -3348,8 +4738,277 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - Wrong input: object not in document. + + Draft + + + + + + + All Shapes must be coplanar + + + + + Selected Shapes must define a plane + + + + + Activate this layer + + + + + Select layer contents + + + + + + Merge layer duplicates + + + + + + Add new layer + + + + + Relabeling layer: + + + + + Merging layer: + + + + + Please load the Draft Workbench to enable editing this object + + + + + ShapeString + + + + + Default + + + + + + + Task panel: + + + + + + + + + Circular array + + + + + + + At least one element must be selected. + + + + + Number of layers must be at least 2. + + + + + + + Selection is not suitable for array. + + + + + + + + + + Object: + + + + + Radial distance is zero. Resulting array may not look correct. + + + + + Radial distance is negative. It is made positive to proceed. + + + + + Tangential distance cannot be zero. + + + + + Tangential distance is negative. It is made positive to proceed. + + + + + + Center reset: + + + + + + + Fuse: + + + + + + + Create Link array: + + + + + Radial distance: + + + + + Tangential distance: + + + + + Number of circular layers: + + + + + Symmetry parameter: + + + + + + Center of rotation: + + + + + + + Aborted: + + + + + + + + + Orthogonal array + + + + + Number of elements must be at least 1. + + + + + Interval X reset: + + + + + Interval Y reset: + + + + + Interval Z reset: + + + + + Number of X elements: + + + + + Interval X: + + + + + Number of Y elements: + + + + + Interval Y: + + + + + Number of Z elements: + + + + + Interval Z: + + + + + + + + Polar array + + + + + Number of elements must be at least 2. + + + + + The angle is above 360 degrees. It is set to this value to proceed. + + + + + The angle is below -360 degrees. It is set to this value to proceed. + + + + + Number of elements: + + + + + Polar angle: @@ -3358,16 +5017,20 @@ Not available if Draft preference option 'Use Part Primitives' is enab + + Wrong input: must be a placement, a vector, or a rotation. + Points: + Wrong input: must be list or tuple of three points exactly. @@ -3408,6 +5071,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Final placement: @@ -3428,6 +5092,160 @@ Not available if Draft preference option 'Use Part Primitives' is enab + + No shape found + + + + + All Shapes must be planar + + + + + + + + + + + + + + + + + + + Wrong input: must be a vector. + + + + + + Wrong input: object must not be a list. + + + + + + Wrong input: must be a list or tuple of strings, or a single string. + + + + + Wrong input: subelement not in object. + + + + + Wrong input: label_type must be a string. + + + + + Wrong input: label_type must be one of the following: + + + + + + + + Wrong input: must be a list of strings or a single string. + + + + + + Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. + + + + + + + + + + Wrong input: must be a number. + + + + + Wrong input: must be a list of at least two vectors. + + + + + Direction is not 'Custom'; points won't be used. + + + + + Wrong input: must be a list of two elements. For example, [object, 'Edge1']. + + + + + Internal orthogonal array + + + + + Wrong input: must be a number or vector. + + + + + + + Input: single value expanded to vector. + + + + + + + Wrong input: must be an integer number. + + + + + + + Input: number of elements must be at least 1. It is set to 1. + + + + + Orthogonal array 2D + + + + + Rectangular array + + + + + Rectangular array 2D + + + + + Wrong input: must be 'Original', 'Frenet', or 'Tangent'. + + + + + Wrong input: must be a number or quantity. + + + + + + length: @@ -3443,6 +5261,8 @@ Not available if Draft preference option 'Use Part Primitives' is enab + + Segment @@ -3452,41 +5272,6 @@ Not available if Draft preference option 'Use Part Primitives' is enab Removed original objects. - - - Wrong input: must be a list of strings or a single string. - - - - - Circular array - - - - - Wrong input: must be a number or quantity. - - - - - Wrong input: must be an integer number. - - - - - Wrong input: must be a vector. - - - - - Polar array - - - - - Wrong input: must be a number. - - This function is deprecated. Do not use this function directly. @@ -3498,11 +5283,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - Wrong input: object must not be a list. - - - + Wrong input: object doesn't have a 'Shape' to measure. @@ -3513,6 +5294,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Wrong input: must be an integer. @@ -3523,6 +5305,7 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Wrong input: vertex not in object. @@ -3553,36 +5336,37 @@ Not available if Draft preference option 'Use Part Primitives' is enab + Wrong input: must be a string, 'radius' or 'diameter'. + Wrong input: must be a list with two angles. - + Layers - - - Layer - - Wrong input: it must be a string. + + + Wrong input: must be a tuple of three floats 0.0 to 1.0. + Wrong input: must be 'Solid', 'Dashed', 'Dotted', or 'Dashdot'. @@ -3592,1519 +5376,11 @@ Not available if Draft preference option 'Use Part Primitives' is enab Wrong input: must be a number between 0 and 100. - - - Wrong input: must be a list or tuple of strings, or a single string. - - - - - Wrong input: must be 'Original', 'Frenet', or 'Tangent'. - - - - - No shape found - - - - - All Shapes must be planar - - - - - Internal orthogonal array - - - - - Wrong input: must be a number or vector. - - - - - Input: single value expanded to vector. - - - - - Input: number of elements must be at least 1. It is set to 1. - - - - - Orthogonal array - - - - - Orthogonal array 2D - - - - - Rectangular array - - - - - Rectangular array 2D - - - - - Wrong input: subelement not in object. - - - - - Wrong input: label_type must be a string. - - - - - Wrong input: label_type must be one of the following: - - - - - Wrong input: must be a string, 'Horizontal', 'Vertical', or 'Custom'. - - - - - Wrong input: must be a list of at least two vectors. - - - - - Direction is not 'Custom'; points won't be used. - - - - - Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - - - - - ShapeString: string has no wires - - - - - added property 'ExtraPlacement' - - - - - , path object doesn't have 'Edges'. - - - - - 'PathObj' property will be migrated to 'PathObject' - - - - - Cannot calculate path tangent. Copy not aligned. - - - - - Tangent and normal are parallel. Copy not aligned. - - - - - Cannot calculate path normal, using default. - - - - - Cannot calculate path binormal. Copy not aligned. - - - - - AlignMode {} is not implemented - - - - - added view property 'ScaleMultiplier' - - - - - migrated 'DraftText' type to 'Text' - - - - - Activate this layer - - - - - Select layer contents - - - - - Merge layer duplicates - - - - - Add new layer - - - - - Relabeling layer: - - - - - Merging layer: - - - - - Please load the Draft Workbench to enable editing this object - - - - - Draft - - - - - custom - - - - - Unable to convert input into a scale factor - - - - - Set custom scale - - - - - Set custom annotation scale in format x:x, x=x - - - - - Set the scale used by draft annotation tools - - - - - Solids: - - - - - Faces: - - - - - Wires: - - - - - Edges: - - - - - Vertices: - - - - - Face - - - - - Wire - - - - - different types - - - - - Objects have different placements. Distance between the two base points: - - - - - has a different value - - - - - doesn't exist in one of the objects - - - - - %s shares a base with %d other objects. Please check if you want to modify this. - - - - - %s cannot be modified because its placement is readonly. - - - - - Wrong input: unknown document. - - - - - This function will be deprecated in - - - - - Please use - - - - - This function will be deprecated. - - - - - Snap Lock - - - - - Snap Endpoint - - - - - Snap Midpoint - - - - - Snap Center - - - - - Snap Angle - - - - - Snap Intersection - - - - - Snap Perpendicular - - - - - Snap Extension - - - - - Snap Parallel - - - - - Snap Special - - - - - Snap Near - - - - - Snap Ortho - - - - - Snap Grid - - - - - Snap WorkingPlane - - - - - Snap Dimensions - - - - - Toggle Draft Grid - - - - - No graphical interface - - - - - Unable to insert new object into a scaled part - - - - - Symbol not implemented. Using a default symbol. - - - - - Visibility off; removed from list: - - - - - image is Null - - - - - filename does not exist on the system or in the resource file - - - - - unable to load texture - - - - - Does not have 'ViewObject.RootNode'. - - - - - Task panel: - - - - - At least one element must be selected. - - - - - Selection is not suitable for array. - - - - - Object: - - - - - Number of elements must be at least 2. - - - - - The angle is above 360 degrees. It is set to this value to proceed. - - - - - The angle is below -360 degrees. It is set to this value to proceed. - - - - - Center reset: - - - - - Fuse: - - - - - Create Link array: - - - - - Number of elements: - - - - - Polar angle: - - - - - Center of rotation: - - - - - Aborted: - - - - - Number of layers must be at least 2. - - - - - Radial distance is zero. Resulting array may not look correct. - - - - - Radial distance is negative. It is made positive to proceed. - - - - - Tangential distance cannot be zero. - - - - - Tangential distance is negative. It is made positive to proceed. - - - - - Radial distance: - - - - - Tangential distance: - - - - - Number of circular layers: - - - - - Symmetry parameter: - - - - - Number of elements must be at least 1. - - - - - Interval X reset: - - - - - Interval Y reset: - - - - - Interval Z reset: - - - - - Number of X elements: - - - - - Interval X: - - - - - Number of Y elements: - - - - - Interval Y: - - - - - Number of Z elements: - - - - - Interval Z: - - - - - ShapeString - - - - - Default - - - - - Create ShapeString - - - - - The DXF import/export libraries needed by FreeCAD to handle -the DXF format were not found on this system. -Please either enable FreeCAD to download these libraries: - 1 - Load Draft workbench - 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads -Or download these libraries manually, as explained on -https://github.com/yorikvanhavre/Draft-dxf-importer -To enabled FreeCAD to download these libraries, answer Yes. - - - - - Select an object to upgrade - - - - - Downgrade - - - - - Select an object to clone - - - - - Pick first point - - - - - Create Ellipse - - - - - Pick opposite point - - - - - Create Line - - - - - Create Wire - - - - - Pick next point - - - - - Unable to create a Wire from selected objects - - - - - Convert to Wire - - - - - This object does not support possible coincident points, please try again. - - - - - Active object must have more than two points/nodes - - - - - Selection is not a Knot - - - - - Endpoint of BezCurve can't be smoothed - - - - - Sketch is too complex to edit: it is suggested to use sketcher default editor - - - - - Select faces from existing objects - - - - - Change slope - - - - - Select an object to edit - - - - - Create Dimension - - - - - Create Dimension (radial) - - - - - Edge too short! - - - - - Edges don't intersect! - - - - - The Drawing Workbench is obsolete since 0.17, consider using the TechDraw Workbench instead. - - - - - Select an object to project - - - - - Annotation style editor - - - - - Open styles file - - - - - JSON file (*.json) - - - - - Save styles file - - - - - Upgrade - - - - - Select an object to move - - - - - Pick start point - - - - - Pick end point - - - - - Move - - - - - Some subelements could not be moved. - - - - - Please select exactly two objects, the base object and the point object, before calling this command. - - - - - Point array - - - - - No active Draft Toolbar. - - - - - Construction mode - - - - - Continue mode - - - - - Toggle display mode - - - - - Main toggle snap - - - - - Midpoint snap - - - - - Perpendicular snap - - - - - Grid snap - - - - - Intersection snap - - - - - Parallel snap - - - - - Endpoint snap - - - - - Angle snap (30 and 45 degrees) - - - - - Arc center snap - - - - - Edge extension snap - - - - - Near snap - - - - - Orthogonal snap - - - - - Special point snap - - - - - Dimension display - - - - - Working plane snap - - - - - Show snap toolbar - - - - - Select an object to array - - - - - Array - - - - - Pick center point - - - - - Pick radius - - - - - Create Polygon (Part) - - - - - Create Polygon - - - - - Select an object to mirror - - - - - Pick start point of mirror line - - - - - Mirror - - - - - Pick end point of mirror line - - - - - Create Point - - - - - Select an object to scale - - - - - Pick base point - - - - - Pick reference distance from base point - - - - - Scale - - - - - Some subelements could not be scaled. - - - - - Unable to scale object: - - - - - Unable to scale objects: - - - - - This object type cannot be scaled directly. Please use the clone method. - - - - - Pick new distance from base point - - - - - (ON) - - - - - (OFF) - - - - - Create 2D view - - - - - Bézier curve has been closed - - - - - Last point has been removed - - - - - Pick next point, or finish (A) or close (O) - - - - - Create BezCurve - - - - - Click and drag to define next knot - - - - - Click and drag to define next knot, or finish (A) or close (O) - - - - - Flip dimension - - - - - Select an object to stretch - - - - - Pick first point of selection rectangle - - - - - Pick opposite point of selection rectangle - - - - - Pick start point of displacement - - - - - Pick end point of displacement - - - - - Turning one Rectangle into a Wire - - - - - Stretch - - - - - Toggle grid - - - - - Create Plane - - - - - Create Rectangle - - - - - Select an object to convert. - - - - - Convert to Sketch - - - - - Convert to Draft - - - - - Convert Draft/Sketch - - - - - Heal - - - - - Pick target point - - - - - Create Label - - - - - Pick endpoint of leader line - - - - - Pick text position - - - - - Select a Draft object to edit - - - - - No edit point found for selected object - - - - - Too many objects selected, max number set to: - - - - - : this object is not editable - - - - - Please select exactly two objects, the base object and the path object, before calling this command. - - - - - Path array - - - - - Path twisted array - - - - - Select objects to trim or extend - - - - - Pick distance - - - - - Offset angle - - - - - Unable to trim these objects, only Draft wires and arcs are supported. - - - - - Unable to trim these objects, too many wires - - - - - These objects don't intersect. - - - - - Too many intersection points. - - - - - Select an object to join - - - - - Join lines - - - - - Selection: - - - - - Spline has been closed - - - - - Create B-spline - - - - - Pick a face, 3 vertices or a WP Proxy to define the drawing plane - - - - - Working plane aligned to global placement of - - - - - Dir - - - - - Custom - - - - - Click anywhere on a line to split it. - - - - - Split line - - - - - Fillet radius - - - - - Radius of fillet - - - - - Enter radius. - - - - - Delete original objects: - - - - - Chamfer mode: - - - - - Two elements needed. - - - - - Test object - - - - - Test object removed - - - - - Fillet cannot be created - - - - - Create fillet - - - - - Pick ShapeString location point - - - - - Change Style - - - - - Add to group - - - - - Ungroup - - - - - Add new group - - - - - Select group - - - - - No new selection. You must select non-empty groups or objects inside groups. - - - - - Autogroup - - - - - Add new Layer - - - - - Add to construction group - - - - - Add a new group with a given name - - - - - Add group - - - - - Group name - - - - - Group - - - - - Select an object to offset - - - - - Offset only works on one object at a time. - - - - - Cannot offset this object type - - - - - Offset of Bezier curves is currently not supported - - - - - Start angle - - - - - Pick start angle - - - - - Aperture angle - - - - - Pick aperture - - - - - Create Circle (Part) - - - - - Create Circle - - - - - Create Arc (Part) - - - - - Create Arc - - - - - Pick aperture angle - - - - - Arc by 3 points - - - - - Pick location point - - - - - Create Text - - - - - Select an object to rotate - - - - - Pick rotation center - - - - - Base angle - - - - - The base angle you wish to start the rotation from - - - - - Pick base angle - - - - - Rotation - - - - - The amount of rotation you wish to perform. -The final angle will be the base angle plus this amount. - - - - - Pick rotation angle - - importOCA - + OCA error: couldn't determine character encoding diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts index a3150123dc..2f90e0be79 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts @@ -295,6 +295,54 @@ Do you want to continue? Orthographic Projection + + Projection + + + + Third Angle + + + + First Angle + + + + View from: + + + + X +ve + + + + Y +ve + + + + Z +ve + + + + X -ve + + + + Y -ve + + + + Z -ve + + + + Axis aligned right: + + + + Secondary Views + + Right click for axonometric settings @@ -303,10 +351,6 @@ Do you want to continue? Primary view - - Secondary Views - - General @@ -340,35 +384,7 @@ Do you want to continue? - Axis out and right - - - - Vertical tilt - - - - X +ve - - - - Y +ve - - - - Z +ve - - - - X -ve - - - - Y -ve - - - - Z -ve + View projection @@ -383,46 +399,30 @@ Do you want to continue? Trimetric - - Scale - - - - View projection - - Axis aligned up + + Axis out and right + + + + Vertical tilt + + Flip + + Scale + + Trimetric - - Projection - - - - Third Angle - - - - First Angle - - - - View from: - - - - Axis aligned right: - - DrawingGui::TaskProjection diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 0fa7b9a78c..851594bd5f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -1,6 +1,705 @@ + + BoundarySelector + + + Select Faces/Edges/Vertexes + + + + + To add references: select them in the 3D view and click "Add". + + + + + ControlWidget + + + Solver Control + + + + + Working Directory + + + + + + Write + + + + + + + + Edit + + + + + Elapsed Time: + + + + + + Run + + + + + + Re-write + + + + + Re-run + + + + + Abort + + + + + FEM_Analysis + + + Analysis container + + + + + Creates an analysis container with standard solver CalculiX + + + + + FEM_ClippingPlaneAdd + + + Clipping plane on face + + + + + Add a clipping plane on a selected face + + + + + FEM_ClippingPlaneRemoveAll + + + + Remove all clipping planes + + + + + FEM_ConstantVacuumPermittivity + + + Constant vacuum permittivity + + + + + Creates a FEM constant vacuum permittivity to overwrite standard value + + + + + FEM_ConstraintBodyHeatSource + + + Constraint body heat source + + + + + Creates a FEM constraint body heat source + + + + + FEM_ConstraintCentrif + + + Constraint centrif + + + + + Creates a FEM constraint centrif + + + + + FEM_ConstraintElectrostaticPotential + + + Constraint electrostatic potential + + + + + Creates a FEM constraint electrostatic potential + + + + + FEM_ConstraintFlowVelocity + + + Constraint flow velocity + + + + + Creates a FEM constraint flow velocity + + + + + FEM_ConstraintInitialFlowVelocity + + + Constraint initial flow velocity + + + + + Creates a FEM constraint initial flow velocity + + + + + FEM_ConstraintSectionPrint + + + Constraint sectionprint + + + + + Creates a FEM constraint sectionprint + + + + + FEM_ConstraintSelfWeight + + + Constraint self weight + + + + + Creates a FEM constraint self weight + + + + + FEM_ConstraintTie + + + Constraint tie + + + + + Creates a FEM constraint tie + + + + + FEM_ElementFluid1D + + + Fluid section for 1D flow + + + + + Creates a FEM fluid section for 1D flow + + + + + FEM_ElementGeometry1D + + + Beam cross section + + + + + Creates a FEM beam cross section + + + + + FEM_ElementGeometry2D + + + Shell plate thickness + + + + + Creates a FEM shell plate thickness + + + + + FEM_ElementRotation1D + + + Beam rotation + + + + + Creates a FEM beam rotation + + + + + FEM_EquationElasticity + + + Elasticity equation + + + + + Creates a FEM equation for elasticity + + + + + FEM_EquationElectricforce + + + Electricforce equation + + + + + Creates a FEM equation for electric forces + + + + + FEM_EquationElectrostatic + + + Electrostatic equation + + + + + Creates a FEM equation for electrostatic + + + + + FEM_EquationFlow + + + Flow equation + + + + + Creates a FEM equation for flow + + + + + FEM_EquationFlux + + + Flux equation + + + + + Creates a FEM equation for flux + + + + + FEM_EquationHeat + + + Heat equation + + + + + Creates a FEM equation for heat + + + + + FEM_Examples + + + + Open FEM examples + + + + + FEM_FEMMesh2Mesh + + + FEM mesh to mesh + + + + + Convert the surface of a FEM mesh to a mesh + + + + + FEM_MaterialEditor + + + Material editor + + + + + Opens the FreeCAD material editor + + + + + FEM_MaterialFluid + + + Material for fluid + + + + + Creates a FEM material for fluid + + + + + FEM_MaterialMechanicalNonlinear + + + Nonlinear mechanical material + + + + + Creates a nonlinear mechanical material + + + + + FEM_MaterialReinforced + + + Reinforced material (concrete) + + + + + Creates a material for reinforced matrix material such as concrete + + + + + FEM_MaterialSolid + + + Material for solid + + + + + Creates a FEM material for solid + + + + + FEM_MeshBoundaryLayer + + + FEM mesh boundary layer + + + + + Creates a FEM mesh boundary layer + + + + + FEM_MeshClear + + + Clear FEM mesh + + + + + Clear the Mesh of a FEM mesh object + + + + + FEM_MeshDisplayInfo + + + + Display FEM mesh info + + + + + FEM_MeshGmshFromShape + + + FEM mesh from shape by Gmsh + + + + + Create a FEM mesh from a shape by Gmsh mesher + + + + + FEM_MeshGroup + + + FEM mesh group + + + + + Creates a FEM mesh group + + + + + FEM_MeshNetgenFromShape + + + FEM mesh from shape by Netgen + + + + + Create a FEM mesh from a solid or face shape by Netgen internal mesher + + + + + FEM_MeshRegion + + + FEM mesh region + + + + + Creates a FEM mesh region + + + + + FEM_ResultShow + + + Show result + + + + + Shows and visualizes selected result data + + + + + FEM_ResultsPurge + + + Purge results + + + + + Purges all results from active analysis + + + + + FEM_SolverCalculix + + + Solver CalculiX (new framework) + + + + + Creates a FEM solver CalculiX new framework (less result error handling) + + + + + FEM_SolverCalculixCxxtools + + + Solver CalculiX Standard + + + + + Creates a standard FEM solver CalculiX with ccx tools + + + + + FEM_SolverControl + + + Solver job control + + + + + Changes solver attributes and runs the calculations for the selected solver + + + + + FEM_SolverElmer + + + Solver Elmer + + + + + Creates a FEM solver Elmer + + + + + FEM_SolverMystran + + + Solver Mystran + + + + + Creates a FEM solver Mystran + + + + + FEM_SolverRun + + + Run solver calculations + + + + + Runs the calculations for the selected solver + + + + + FEM_SolverZ88 + + + Solver Z88 + + + + + Creates a FEM solver Z88 + + + + + GeometryElementsSelection + + + Geometry reference selector for a + + + + + Add + + + + + Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{} + + + + + {}If no geometry is added to the list, all remaining ones are used. + + + + + Selection mode + + + + + Solid + + + + + SolidSelector + + + Select Solids + + + + + Select elements part of the solid that shall be added to the list. To add the solid click "Add". + + + + + _Selector + + + Add + + + + + Remove + + + CmdFemConstraintBearing @@ -2878,7 +3577,7 @@ that "MAXKOI" needs to be increased. - Counter of the body (or face) with a capcitance + Counter of the body (or face) with a capacitance diff --git a/src/Mod/Image/Gui/Resources/translations/Image.ts b/src/Mod/Image/Gui/Resources/translations/Image.ts index e0b4a3b807..5c30ececb2 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image.ts @@ -4,37 +4,37 @@ Dialog - + Scale image plane - + Distance [mm] - + Select first point - + <font color='red'>Enter distance</font> - + <font color='red'>Select ImagePlane</font> - + Select second point - + Select Image Plane and type distance @@ -42,12 +42,12 @@ Image_Scaling - + Scale image plane - + Scales an image plane by defining a distance between two points diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts index d268848472..7950843669 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts @@ -754,7 +754,7 @@ - Number of points: + Number of faces: @@ -762,11 +762,11 @@ - Number of faces: + Number of edges: - Number of edges: + Number of points: @@ -983,22 +983,6 @@ Please run the command to repair folds first Regular Solid - - &Create - - - - Alt+C - - - - Cl&ose - - - - Alt+O - - Solid: @@ -1027,10 +1011,6 @@ Please run the command to repair folds first Torus - - Height: - - Length: @@ -1039,12 +1019,16 @@ Please run the command to repair folds first Width: + + Height: + + Radius: - Closed + Edge length: @@ -1052,7 +1036,7 @@ Please run the command to repair folds first - Edge length: + Closed @@ -1063,6 +1047,22 @@ Please run the command to repair folds first Radius 2: + + &Create + + + + Alt+C + + + + Cl&ose + + + + Alt+O + + MeshGui::DlgRegularSolidImp @@ -1085,10 +1085,6 @@ Please run the command to repair folds first Export - - Maximal deviation between mesh and object - - Deviation of tessellation to the actual surface @@ -1101,6 +1097,10 @@ Please run the command to repair folds first Maximum mesh deviation + + Maximal deviation between mesh and object + + ZIP compression is used when writing a mesh file in AMF format @@ -1134,37 +1134,37 @@ is used when writing a file in AMF format - Default line color - - - - Mesh transparency + Default mesh color Default color for new meshes + + Mesh transparency + + % - Default mesh color - - - - A bounding box will be displayed - - - - Show bounding-box for highlighted or selected meshes + Default line color Default line color for new meshes + + Line transparency + + + + Backface color + + The bottom side of surface will be rendered the same way than top side. If not checked, it depends on the option "Enable backlight color" @@ -1177,25 +1177,17 @@ will be used or black. - Line transparency + A bounding box will be displayed - Backface color + Show bounding-box for highlighted or selected meshes Smoothing - - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> - - - - Crease angle - - If this option is set Phong shading is used, otherwise flat shading. Shading defines the appearance of surfaces. @@ -1210,6 +1202,14 @@ to a smoother appearance. Define normal per vertex + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> + + + + Crease angle + + Crease angle is a threshold angle between two faces. @@ -1371,6 +1371,10 @@ to a smoother appearance. MeshGui::RemeshGmsh + + Remesh by Gmsh + + Remeshing Parameter @@ -1411,10 +1415,6 @@ to a smoother appearance. Clear - - Remesh by Gmsh - - MeshGui::RemoveComponents @@ -1426,40 +1426,40 @@ to a smoother appearance. Select - - Select whole component - - - - Pick triangle - - - - < faces than - - Region - - Components - - All + + Components + + + + < faces than + + + + Pick triangle + + + + Select whole component + + Deselect - Deselect whole component + > faces than - > faces than + Deselect whole component @@ -1537,7 +1537,11 @@ to a smoother appearance. - Sphere + Plane + + + + Parameters... @@ -1548,18 +1552,14 @@ to a smoother appearance. Minimum number of faces - - Parameters... - - - - Plane - - Cylinder + + Sphere + + Base @@ -1743,6 +1743,10 @@ Please visit http://www.openscad.org/index.html to install it. Asymptote Format + + 3D Manufacturing Format + + Export mesh @@ -1799,6 +1803,10 @@ Please visit http://www.openscad.org/index.html to install it. Display segments + + Display colors + + Leave info mode @@ -1827,10 +1835,6 @@ Please visit http://www.openscad.org/index.html to install it. Annotation - - 3D Manufacturing Format - - Workbench @@ -1846,12 +1850,32 @@ Please visit http://www.openscad.org/index.html to install it. &Meshes + + Cutting + + Mesh tools - Cutting + Mesh modify + + + + Mesh boolean + + + + Mesh cutting + + + + Mesh segmentation + + + + Mesh analyze diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts index 505ed55812..c53094d46f 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart.ts @@ -9,7 +9,8 @@ - + + Find a flat representation of a mesh. diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index 1a2a28730c..03bfc3aea0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -4,23 +4,29 @@ OpenSCAD - + OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - + Error all shapes must be either 2D or both must be 3D - - Unsupported Function + + It looks like you may be using a Snap version of OpenSCAD. - - Press OK + + + If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + + + + + It looks like you may be using a sandboxed version of FreeCAD. @@ -29,7 +35,7 @@ - + Convert Edges to Faces @@ -39,50 +45,71 @@ + Add + Clear + Load + Save + Refresh + as Mesh + Add OpenSCAD Element + Perform + Mesh Boolean + + + + Unsupported Function + + + + + + Press OK + + OpenSCAD_AddOpenSCADElement @@ -92,7 +119,7 @@ - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -105,7 +132,7 @@ - + Color Shapes by validity and type @@ -126,7 +153,7 @@ - + Expand all placements downwards the FeatureTree @@ -139,7 +166,7 @@ - + Remove fusion, apply placement to children, and color randomly @@ -152,7 +179,7 @@ - + Perform Hull @@ -165,7 +192,7 @@ - + Create Feature that allows to increase the tolerance @@ -178,7 +205,7 @@ - + Export objects as meshes and use OpenSCAD to perform a boolean operation @@ -191,7 +218,7 @@ - + Perform Minkowski @@ -204,7 +231,7 @@ - + Create Mirror Mesh Feature @@ -217,7 +244,7 @@ - + Create Refine Shape Feature @@ -230,7 +257,7 @@ - + Removes the selected objects and all children that are not referenced from other objects @@ -243,7 +270,7 @@ - + Replace an object in the Feature Tree. Please select old, new, and parent object @@ -256,7 +283,7 @@ - + Create Resize Mesh Feature @@ -269,7 +296,7 @@ - + Create Scale Mesh Feature @@ -277,7 +304,7 @@ Workbech - + OpenSCAD Part tools @@ -285,7 +312,7 @@ Workbench - + OpenSCADTools diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index afeea26d39..08b286db2c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -1,6 +1,833 @@ + + AttachmentEditor + + + No object named {name} + + + + + Failed to parse link (more than one colon encountered) + + + + + Object {name} is neither movable nor attachable, can't edit attachment + + + + + {obj} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + + + + + + Attachment + + + + + Continue + + + + + + Edit attachment of {feat} + + + + + Ignored. Can't attach object to itself! + + + + + {obj1} depends on object being attached, can't use it for attachment + + + + + {mode} (add {morerefs}) + + + + + {mode} (add more references) + + + + + Reference combinations: + + + + + Reference{i} + + + + + Selecting... + + + + + Failed to resolve links. {err} + + + + + Not attached + + + + + Attached with mode {mode} + + + + + Error: {err} + + + + + Attachment Offset (in local coordinates): + + + + + Attachment Offset (inactive - not attached): + + + + + Attachment... + + + + + Edit attachment of selected object. + + + + + Part_CompoundFilter + + + Compound Filter + + + + + Filter out objects from a selected compound by characteristics like volume, +area, or length, or by choosing specific items. +If a second object is selected, it will be used as reference, for example, +for collision or distance filtering. + + + + + First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + + + + + + Bad selection + + + + + Computing the result failed with an error: + +{errstr} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + Part_ExplodeCompound + + + Explode compound + + + + + Split up a compound of shapes into separate objects. +It will create a 'Compound Filter' for each shape. + + + + + First select a shape that is a compound. + + + + + Bad selection + + + + + Part_JoinConnect + + + Connect objects + + + + + Fuses objects, taking care to preserve voids. + + + + + Part_JoinCutout + + + Cutout for object + + + + + Makes a cutout in one object to fit another object. + + + + + Part_JoinEmbed + + + Embed object + + + + + Fuses one object into another, taking care to preserve voids. + + + + + Part_JoinFeatures + + + Computing the result failed with an error: + +{err} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + + + + Bad selection + + + + + Continue + + + + + Select at least two objects, or one or more compounds + + + + + Select base object, then the object to embed, and then invoke this tool. + + + + + Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. + + + + + Part_SplitFeatures + + + + + + Continue + + + + + + + Computing the result failed with an error: + +{err} + +Click 'Continue' to create the feature anyway, or 'Abort' to cancel. + + + + + + + + + + + Bad selection + + + + + Boolean fragments + + + + + Create a 'Boolean Fragments' object from two or more selected objects, +or from the shapes inside a compound. +This is a boolean union which is then sliced at the intersections +of the original shapes. +A 'Compound Filter' can be used to extract the individual slices. + + + + + + Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + + + + + Slice to compound + + + + + Slice a selected object by using other objects as cutting tools. +The resulting pieces will be stored in a compound. +A 'Compound Filter' can be used to extract the individual slices. + + + + + + Select at least two objects. The first one is the object to be sliced; the rest are objects to slice with. + + + + + Slice apart + + + + + Slice a selected object by other objects, and split it apart. +It will create a 'Compound Filter' for each slice. + + + + + Boolean XOR + + + + + Perform an 'exclusive OR' boolean operation with two or more selected objects, +or with the shapes inside a compound. +This means the overlapping volumes of the shapes will be removed. +A 'Compound Filter' can be used to extract the remaining pieces. + + + + + Part_Tube + + + Create tube + + + + + Creates a tube + + + + + QObject + + + + Edit %1 + + + + + Create tube + + + + + + + Part design + + + + + + Import-Export + + + + + + + + + + Wrong selection + + + + + + Select two shapes please. + + + + + + + Non-solids selected + + + + + + + The use of non-solids for boolean operations may lead to unexpected results. +Do you want to continue? + + + + + Select two shapes or more, please. Or, select one compound containing two or more shapes to compute common between. + + + + + Select two shapes or more, please. Or, select one compound containing two or more shapes to be fused. + + + + + Select one shape or more, please. + + + + + All CAD Files + + + + + All Files + + + + + You have to select either two edges or two wires. + + + + + + No reference selected + + + + + + Face + + + + + + Edge + + + + + + Vertex + + + + + Compound + + + + + Compound Solid + + + + + Solid + + + + + Shell + + + + + Wire + + + + + Shape + + + + + No Error + + + + + Invalid Point On Curve + + + + + Invalid Point On Curve On Surface + + + + + Invalid Point On Surface + + + + + No 3D Curve + + + + + Multiple 3D Curve + + + + + Invalid 3D Curve + + + + + No Curve On Surface + + + + + Invalid Curve On Surface + + + + + Invalid Curve On Closed Surface + + + + + Invalid Same Range Flag + + + + + Invalid Same Parameter Flag + + + + + Invalid Degenerated Flag + + + + + Free Edge + + + + + Invalid MultiConnexity + + + + + Invalid Range + + + + + Empty Wire + + + + + Redundant Edge + + + + + Self Intersecting Wire + + + + + No Surface + + + + + Invalid Wire + + + + + Redundant Wire + + + + + Intersecting Wires + + + + + Invalid Imbrication Of Wires + + + + + Empty Shell + + + + + Redundant Face + + + + + Unorientable Shape + + + + + Not Closed + + + + + Not Connected + + + + + Sub Shape Not In Shape + + + + + Bad Orientation + + + + + Bad Orientation Of Sub Shape + + + + + Invalid Tolerance Value + + + + + Check Failed + + + + + No Result + + + + + Out Of Enum Range: + + + + + BOPAlgo CheckUnknown + + + + + BOPAlgo BadType + + + + + BOPAlgo SelfIntersect + + + + + BOPAlgo TooSmallEdge + + + + + BOPAlgo NonRecoverableFace + + + + + BOPAlgo IncompatibilityOfVertex + + + + + BOPAlgo IncompatibilityOfEdge + + + + + BOPAlgo IncompatibilityOfFace + + + + + BOPAlgo OperationAborted + + + + + BOPAlgo GeomAbs_C0 + + + + + BOPAlgo_InvalidCurveOnSurface + + + + + BOPAlgo NotValid + + + + + + Invalid + + + + + + Selections + + + + + + Control + + + + + Selection + + + + + Reset selection + + + + + Toggle direct dimensions + + + + + Toggle orthogonal dimensions + + + + + Clear all dimensions + + + + + Set colors... + + + + + Edit mirror plane + + + + + Edit fillet edges + + + + + Edit chamfer edges + + + + + Edit offset + + + + + Edit thickness + + + + + Show control points + + + + + Attachment editor + + + Attacher @@ -5467,461 +6294,6 @@ in the 3D view for the sweep path. - - QObject - - - - Edit %1 - - - - - - - Part design - - - - - - Import-Export - - - - - - - - - - Wrong selection - - - - - - Select two shapes please. - - - - - - - Non-solids selected - - - - - - - The use of non-solids for boolean operations may lead to unexpected results. -Do you want to continue? - - - - - Select two shapes or more, please. Or, select one compound containing two or more shapes to compute common between. - - - - - Select two shapes or more, please. Or, select one compound containing two or more shapes to be fused. - - - - - Select one shape or more, please. - - - - - All CAD Files - - - - - All Files - - - - - You have to select either two edges or two wires. - - - - - - No reference selected - - - - - - Face - - - - - - Edge - - - - - - Vertex - - - - - Compound - - - - - Compound Solid - - - - - Solid - - - - - Shell - - - - - Wire - - - - - Shape - - - - - No Error - - - - - Invalid Point On Curve - - - - - Invalid Point On Curve On Surface - - - - - Invalid Point On Surface - - - - - No 3D Curve - - - - - Multiple 3D Curve - - - - - Invalid 3D Curve - - - - - No Curve On Surface - - - - - Invalid Curve On Surface - - - - - Invalid Curve On Closed Surface - - - - - Invalid Same Range Flag - - - - - Invalid Same Parameter Flag - - - - - Invalid Degenerated Flag - - - - - Free Edge - - - - - Invalid MultiConnexity - - - - - Invalid Range - - - - - Empty Wire - - - - - Redundant Edge - - - - - Self Intersecting Wire - - - - - No Surface - - - - - Invalid Wire - - - - - Redundant Wire - - - - - Intersecting Wires - - - - - Invalid Imbrication Of Wires - - - - - Empty Shell - - - - - Redundant Face - - - - - Unorientable Shape - - - - - Not Closed - - - - - Not Connected - - - - - Sub Shape Not In Shape - - - - - Bad Orientation - - - - - Bad Orientation Of Sub Shape - - - - - Invalid Tolerance Value - - - - - Check Failed - - - - - No Result - - - - - Out Of Enum Range: - - - - - BOPAlgo CheckUnknown - - - - - BOPAlgo BadType - - - - - BOPAlgo SelfIntersect - - - - - BOPAlgo TooSmallEdge - - - - - BOPAlgo NonRecoverableFace - - - - - BOPAlgo IncompatibilityOfVertex - - - - - BOPAlgo IncompatibilityOfEdge - - - - - BOPAlgo IncompatibilityOfFace - - - - - BOPAlgo OperationAborted - - - - - BOPAlgo GeomAbs_C0 - - - - - BOPAlgo_InvalidCurveOnSurface - - - - - BOPAlgo NotValid - - - - - - Invalid - - - - - - Selections - - - - - - Control - - - - - Reset selection - - - - - Toggle direct dimensions - - - - - Toggle orthogonal dimensions - - - - - Clear all dimensions - - - - - Set colors... - - - - - Edit mirror plane - - - - - Edit fillet edges - - - - - Edit chamfer edges - - - - - Edit offset - - - - - Edit thickness - - - - - Show control points - - - - - Attachment editor - - - Workbench diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index d87280d1fd..3283aa9fac 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -9,7 +9,7 @@ - + Creates or edit the involute gear definition. @@ -22,7 +22,7 @@ - + Creates or edit the sprocket definition. @@ -30,12 +30,14 @@ WizardShaft - + + Shaft design wizard... - + + Start the shaft design wizard @@ -78,7 +80,7 @@ - + End edge size @@ -1634,14 +1636,6 @@ click again to end selection - - PartDesignGui::TaskDatumParameters - - - parameters - - - PartDesignGui::TaskDlgBooleanParameters @@ -3290,6 +3284,101 @@ click again to end selection + + PartDesignGui::ViewProviderChamfer + + + Chamfer parameters + + + + + PartDesignGui::ViewProviderDatum + + + Datum Plane parameters + + + + + Datum Line parameters + + + + + Datum Point parameters + + + + + Local Coordinate System parameters + + + + + PartDesignGui::ViewProviderDraft + + + Draft parameters + + + + + PartDesignGui::ViewProviderFillet + + + Fillet parrameters + + + + + PartDesignGui::ViewProviderLinearPattern + + + LinearPattern parameters + + + + + PartDesignGui::ViewProviderMultiTransform + + + MultiTransform parameters + + + + + PartDesignGui::ViewProviderPolarPattern + + + PolarPattern parameters + + + + + PartDesignGui::ViewProviderScaled + + + Scaled parameters + + + + + PartDesignGui::ViewProviderThickness + + + Thickness parameters + + + + + PartDesignGuii::ViewProviderMirrored + + + Mirrored parameters + + + PartDesign_CompPrimitiveAdditive @@ -3492,7 +3581,7 @@ click again to end selection - + @@ -3505,7 +3594,7 @@ click again to end selection - + @@ -3856,29 +3945,29 @@ If you have a legacy document with PartDesign objects without Body, use the migr - + Plane - - + + Line - - + + Point - + Coordinate System - + Edit datum diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 492555a790..82edea610e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -4,946 +4,1480 @@ App::Property - - Stop index(angle) for rotational scan - - - - - Additional offset to the selected bounding box - - - - - The model will be rotated around this axis. - - - - - Start index(angle) for rotational scan - - - - - Do not cut internal features on avoided faces. - - - - - Select the overall boundary for the operation. - - - - - The yaw angle used for certain clearing patterns - - - - - Set the start point for the cut pattern. - - - - - Profile the edges of the selection. - - - - - Make True, if specifying a Start Point - - - - - The path to be copied - - - - + + + + + + + + + The base path to modify - + + Angles less than filter angle will not receive corner actions + + + + Distance the point trails behind the spindle - + Height to raise during corner action - - The object to be reached by this hop - - - - - The Z height of the hop - - - - - Default length of extensions. - - - - - List of features to extend. - - - - - Stop processing - - - - - X offset between tool and probe - - - - - Y offset between tool and probe - - - - - Number of points to probe in X direction - - - - - Number of points to probe in Y direction - - - - - The output location for the probe data to be written - - - - - The base geometry for this operation - - - - - Holds the calculated value for the StartDepth - - - - - Holds the calculated value for the FinalDepth - - - - - Holds the diameter of the tool - - - - - Holds the max Z value of Stock - - - - - Holds the min Z value of Stock - - - - - Make False, to prevent operation from generating code - - - - - An optional comment for this Operation - - - - - User Assigned Label - - - - - Operations Cycle Time Estimation - - - - - Base locations for this operation - - - - - Coolant mode for this operation - - - - - Starting Depth of Tool- first cut depth in Z - - - - - Final Depth of Tool- lowest value in Z - - - - - Incremental Step Down of Tool - - - - - Maximum material removed on final pass. - - - - - Rapid Safety Height between locations. - - - - - The start point of this path - - - - - Lower limit of the turning diameter - - - - - Upper limit of the turning diameter. - - - - - Coolant option for this operation - - - - + + + Additional base objects to be engraved - - The deflection value for discretizing arcs + + The vertex index to start the path from - - Vcarve Tolerance - - - - - The input mapping axis - - - - - The radius of the wrapped axis - - - - - Calculate roll-on to path - - - - - Calculate roll-off from path - - - - - Keep the Tool Down in Path - - - - - Length or Radius of the approach - - - - - The Style of motion into the Path - - - - - The Style of motion out of the Path - - - - - The Mode of Point Radiusoffset or Center - - - - - Extends LeadIn distance - - - - - Extends LeadOut distance - - - - - Perform plunges with G0 - - - - - Apply LeadInOut to layers within an operation - - - - - Fixture Offset Number - - - - - Shape for bit shape - - - - - The parametrized body representing the tool bit - - - - - The file of the tool - - - - - The name of the shape file - - - - - List of all properties inherited from the bit - - - - - The gcode to be inserted - - - - - Angle of ramp. - - - - - Ramping Method - - - - - Which feed rate to use for ramping - - - - - Custom feed rate - - - - - Width of tags. - - - - - Height of tags. - - - - - Angle of tag plunge and ascent. - - - - - Radius of the fillet for the tag. - - - - - Locations of inserted holding tags - - - - - IDs of disabled holding tags - - - - - Enable pecking - - - - - The time to dwell between peck cycles - - - - - Enable dwell - - - - - Controls how tool retracts Default=G99 - - - - - How far the drill depth is extended - - - - - Orientation plane of CNC path - - - - - Shape to use for calculating Boundary - - - - - Clear edges of surface (Only applicable to BoundBox) - - - - - Exclude milling raised areas inside the face. - - - - - Ignore outer waterlines above this height. - - - - - Uses the outline of the base geometry. - - - - - The base object this collision refers to - - - - - Enter custom start point for slot path. - - - - - Enter custom end point for slot path. - - - - - Comment or note for CNC program - - - - - Default speed for horizontal rapid moves. - - - - - Default speed for vertical rapid moves. - - - - - Coolant Modes - - - - - Default coolant mode. - - - - - Expression set for the SafeHeight of new operations. - - - - - Expression used for StartDepth of new operations. - - - - - Expression used for FinalDepth of new operations. - - - - - Expression used for StepDown of new operations. - - - - - Start pocketing at center or boundary - - - - - Percent of cutter diameter to step over on each pass - - - - - Angle of the zigzag pattern - - - - - Clearing pattern to use - - - - - Use 3D Sorting of Path - - - - - Attempts to avoid unnecessary retractions. - - - - - The side of path to insert bones - - - - - The style of bones - - - - - Bones that aren't dressed up - - - - - The algorithm to determine the bone length - - - - - Dressup length if Incision == custom - - - - - Add Optional or Mandatory Stop to the program - - - - - The path(s) to array - - - - - Pattern method - - - - - The number of copies in X direction in Linear pattern - - - - - The number of copies in Y direction in Linear pattern - - - - - Total angle in Polar pattern - - - - - The number of copies in Linear 1D and Polar pattern - - - - - The centre of rotation in Polar pattern - - - - - Percent of copies to randomly offset - - - - - Maximum random offset of copies - - - - - Seed value for jitter randomness - - - - - List of custom property groups - - - - - The point file from the surface probing. - - - - - Deflection distance for arc interpolation - - - - + Set thread orientation - + Currently only internal - + Defines which standard thread was chosen - + Set thread's major diameter - + Set thread's minor diameter - + Set thread's pitch - used for metric threads - + + Set thread's TPI (turns per inch) - used for imperial threads + + + + + Set how many passes are used to cut the thread - + Direction of thread cutting operation - + + Set to True to get lead in and lead out arcs at the start and end of the thread cut + + + + Operation to clear the inside of the thread - - The desired width of the chamfer + + + + Show the temporary path construction objects when module is in DEBUG mode. - - The additional depth of the tool path + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - How to join chamfer segments + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - Direction of Operation + + + Stop index(angle) for rotational scan - - Side of Operation + + Dropcutter lines are created parallel to this axis. - - Select the segment, there the operations starts + + Additional offset to the selected bounding box - - The base object this stock is derived from + + The model will be rotated around this axis. - - A material for this object + + Start index(angle) for rotational scan - - Length of this stock box + + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. - - Width of this stock box + + + Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. - - Height of this stock box + + + Do not cut internal features on avoided faces. - - Radius of this stock cylinder + + + Positive values push the cutter toward, or beyond, the boundary. Negative values retract the cutter away from the boundary. - - Height of this stock cylinder + + + If true, the cutter will remain inside the boundaries of the model or selected face(s). - - Internal representation of stock type + + + + + Choose how to process multiple Base Geometry features. - - Split Arcs into discrete segments + + + Positive values push the cutter toward, or into, the feature. Negative values retract the cutter away from the feature. - - The active tool + + + Cut internal feature areas within a larger selected face. - - The speed of the cutting spindle in RPM + + + Select the overall boundary for the operation. - - Direction of spindle rotation + + + Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) - - Feed rate for vertical moves in Z + + + + Set the geometric clearing pattern to use for the operation. - - Feed rate for horizontal moves + + + The yaw angle used for certain clearing patterns - - Rapid rate for vertical moves in Z + + + Reverse the cut order of the stepover paths. For circular cut patterns, begin at the outside and work toward the center. - - Rapid rate for horizontal moves + + + Set the Z-axis depth offset from the target surface. - - The tool used by this controller + + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - List of disabled features + + + Set the start point for the cut pattern. - - The NC output file for this project + + + Choose location of the center point for starting the cut pattern. - - Select the Post Processor + + Profile the edges of the selection. - - Last Time the Job was post-processed + + + Set the sampling resolution. Smaller values quickly increase processing time. - - An optional description for this job + + + Set the stepover percentage, based on the tool's diameter. - - Job Cycle Time Estimation + + + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-Code output. - - Solid object to be used as stock. + + + Enable separate optimization of transitions between, and breaks within, each step over path. - - Select the Type of Job + + Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. - - Split output into multiple gcode files + + + Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. - - If multiple WCS, order the output this way + + + Feedback: three smallest gaps identified in the path geometry. - - The Work Coordinate Systems for the Job + + + + The custom start point for the path of this operation - - SetupSheet holding the settings for this job + + + + + Make True, if specifying a Start Point - - The base objects for all operations + + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - - Collection of all tool controllers for the job - - - - + Start cutting from the inside or outside - + + + + Percent of cutter diameter to step over on each pass + + + + + Starting Radius - + + + + Extra value to stay away from final profile- good for roughing toolpath + + + + + Orientation plane of CNC path + + + + + + + Make False, to prevent operation from generating code + + + + + Solid object to be used to limit the generated Path. + + + + + Determines if Boundary describes an inclusion or exclusion mask. + + + + + Comment or note for CNC program + + + + + Angle of ramp. + + + + + Ramping Method + + + + + Which feed rate to use for ramping + + + + + Custom feed rate + + + + + Should the dressup ignore motion commands above DressupStartDepth + + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + + + + The side of path to insert bones + + + + + The style of bones + + + + + Bones that aren't dressed up + + + + + The algorithm to determine the bone length + + + + + Dressup length if Incision == custom + + + + + The base geometry for this operation + + + + + Holds the calculated value for the StartDepth + + + + + Holds the calculated value for the FinalDepth + + + + + Holds the diameter of the tool + + + + + Holds the max Z value of Stock + + + + + Holds the min Z value of Stock + + + + + An optional comment for this Operation + + + + + User Assigned Label + + + + + + + Operations Cycle Time Estimation + + + + + Base locations for this operation + + + + + + + The tool controller that will be used to calculate the path + + + + + Coolant mode for this operation + + + + + Starting Depth of Tool- first cut depth in Z + + + + + Final Depth of Tool- lowest value in Z + + + + + Starting Depth internal use only for derived values + + + + + Incremental Step Down of Tool + + + + + Maximum material removed on final pass. + + + + + The height needed to clear clamps and obstructions + + + + + Rapid Safety Height between locations. + + + + + The start point of this path + + + + + Lower limit of the turning diameter + + + + + Upper limit of the turning diameter. + + + + + Coolant option for this operation + + + + + Default length of extensions. + + + + + List of features to extend. + + + + + When enabled connected extension edges are combined to wires. + + + + + The desired width of the chamfer + + + + + The additional depth of the tool path + + + + + How to join chamfer segments + + + + + Direction of Operation + + + + + Side of Operation + + + + + Select the segment, there the operations starts + + + + + Enter custom start point for slot path. + + + + + Enter custom end point for slot path. + + + + + Positive extends the beginning of the path, negative shortens. + + + + + Positive extends the end of the path, negative shortens. + + + + + Choose the path orientation with regard to the feature(s) selected. + + + + + Choose what point to use on the first selected feature. + + + + + Choose what point to use on the second selected feature. + + + + + For arcs/circlular edges, offset the radius for the path. + + + + + Enable to reverse the cut direction of the slot path. + + + + + The path to be copied + + + + + The object to be reached by this hop + + + + + The Z height of the hop + + + + + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) + + + + + Extra offset to apply to the operation. Direction is operation dependent. + + + + + Start pocketing at center or boundary + + + + + Angle of the zigzag pattern + + + + + Clearing pattern to use + + + + + Use 3D Sorting of Path + + + + + Attempts to avoid unnecessary retractions. + + + + + + Last Stepover Radius. If 0, 50% of cutter is used. Tuning this can be used to improve stepover for some shapes + + + + + The NC output file for this project + + + + + Select the Post Processor + + + + + Arguments for the Post Processor (specific to the script) + + + + + + Last Time the Job was post-processed + + + + + An optional description for this job + + + + + Job Cycle Time Estimation + + + + + For computing Paths; smaller increases accuracy, but slows down computation + + + + + Solid object to be used as stock. + + + + + Compound path of all operations in the order they are processed. + + + + + + Select the Type of Job + + + + + + Split output into multiple gcode files + + + + + + If multiple WCS, order the output this way + + + + + + The Work Coordinate Systems for the Job + + + + + SetupSheet holding the settings for this job + + + + + The base objects for all operations + + + + + Collection of all tool controllers for the job + + + + + The base object this collision refers to + + + + + The path(s) to array + + + + + Pattern method + + + + + The spacing between the array copies in Linear pattern + + + + + The number of copies in X direction in Linear pattern + + + + + The number of copies in Y direction in Linear pattern + + + + + Total angle in Polar pattern + + + + + The number of copies in Linear 1D and Polar pattern + + + + + The centre of rotation in Polar pattern + + + + + Make copies in X direction before Y in Linear 2D pattern + + + + + Percent of copies to randomly offset + + + + + Maximum random offset of copies + + + + + + Seed value for jitter randomness + + + + + The point file from the surface probing. + + + + + Deflection distance for arc interpolation + + + + + break segments into smaller segments of this length. + + + + + + Uses the outline of the base geometry. + + + + + The deflection value for discretizing arcs + + + + + Cutoff for removing colinear segments (degrees). + default=10.0. + + + + + Vcarve Tolerance + + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + + + + Set to clear last layer in a `Multi-pass` operation. + + + + + Ignore outer waterlines above this height. + + + + + Shape for bit shape + + + + + The parametrized body representing the tool bit + + + + + The file of the tool + + + + + The name of the shape file + + + + + + List of all properties inherited from the bit + + + + + The input mapping axis + + + + + The radius of the wrapped axis + + + + + + Split Arcs into discrete segments + + + + + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. + + + + + Use adaptive algorithm to eliminate excessive air milling below planar pocket bottom. + + + + + Process the model and stock in an operation with no Base Geometry selected. + + + + + The active tool + + + + + The speed of the cutting spindle in RPM + + + + + Direction of spindle rotation + + + + + Feed rate for vertical moves in Z + + + + + Feed rate for horizontal moves + + + + + Rapid rate for vertical moves in Z + + + + + Rapid rate for horizontal moves + + + + + + The tool used by this controller + + + + + Add Optional or Mandatory Stop to the program + + + + + List of disabled features + + + + + Calculate roll-on to path + + + + + Calculate roll-off from path + + + + + Keep the Tool Down in Path + + + + + Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 + + + + + Length or Radius of the approach + + + + + The Style of motion into the Path + + + + + The Style of motion out of the Path + + + + + The Mode of Point Radiusoffset or Center + + + + + Extends LeadIn distance + + + + + Extends LeadOut distance + + + + + Perform plunges with G0 + + + + + Apply LeadInOut to layers within an operation + + + + + Default speed for horizontal rapid moves. + + + + + Default speed for vertical rapid moves. + + + + + + Coolant Modes + + + + + + Default coolant mode. + + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + + Expression set for the SafeHeight of new operations. + + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + + Expression set for the ClearanceHeight of new operations. + + + + + Expression used for StartDepth of new operations. + + + + + Expression used for FinalDepth of new operations. + + + + + Expression used for StepDown of new operations. + + + + + Controls how tool moves around corners. Default=Round + + + + Maximum distance before a miter join is truncated - + Profile holes as well as the outline - + Profile the outline - + Profile round holes - + Side of edge that tool should cut - + Make True, if using Cutter Radius Compensation - - The vertex index to start the path from + + Fixture Offset Number + + + + + + Width of tags. + + + + + + Height of tags. + + + + + + Angle of tag plunge and ascent. + + + + + + Radius of the fillet for the tag. + + + + + + Locations of inserted holding tags + + + + + + IDs of disabled holding tags + + + + + + Factor determining the # of segments used to approximate rounded tags. + + + + + The gcode to be inserted + + + + + Incremental Drill depth before retracting to clear chips + + + + + Enable pecking + + + + + The time to dwell between peck cycles + + + + + Enable dwell + + + + + Calculate the tip length and subtract from final depth + + + + + Controls how tool retracts Default=G99 + + + + + The height where feed starts and height during retract tool when path is finished while in a peck operation + + + + + How far the drill depth is extended + + + + + Shape to use for calculating Boundary + + + + + Clear edges of surface (Only applicable to BoundBox) + + + + + Exclude milling raised areas inside the face. + + + + + List of custom property groups + + + + + Side of selected faces that tool should cut + + + + + Type of adaptive operation + + + + + Influences accuracy and performance + + + + + Lift distance for rapid moves + + + + + Max length of keep tool down path compared to direct distance between points + + + + + How much stock to leave (i.e. for finishing operation) + + + + + Force plunging into material inside and clearing towards the edges + + + + + To take a finishing profile path at the end + + + + + + Stop processing + + + + + Use Arcs (G2) for helix ramp + + + + + Internal input state + + + + + Internal output state + + + + + Helix ramp entry angle (degrees) + + + + + Helix cone angle (degrees) + + + + + Limit helix entry diameter, if limit larger than tool diameter or 0, tool diameter is used + + + + + The base object this stock is derived from + + + + + Extra allowance from part bound box in negative X direction + + + + + Extra allowance from part bound box in positive X direction + + + + + Extra allowance from part bound box in negative Y direction + + + + + Extra allowance from part bound box in positive Y direction + + + + + Extra allowance from part bound box in negative Z direction + + + + + Extra allowance from part bound box in positive Z direction + + + + + A material for this object + + + + + Length of this stock box + + + + + Width of this stock box + + + + + Height of this stock box + + + + + Radius of this stock cylinder + + + + + Height of this stock cylinder + + + + + Internal representation of stock type + + + + + X offset between tool and probe + + + + + Y offset between tool and probe + + + + + Number of points to probe in X direction + + + + + Number of points to probe in Y direction + + + + + The output location for the probe data to be written Path - - %s is not a Base Model object of the job %s + + The currently selected unit schema: + '{}' + Does not use 'minutes' for velocity values. + +CNC machines require feed rate to be expressed in +unit/minute. To ensure correct gcode: +Select a minute-based schema in preferences. +For example: + 'Metric, Small Parts & CNC' + 'US Customary' + 'Imperial Decimal' - - Edit + + Warning - - Base shape %s already in the list + + Ok - - Legacy Tools not supported + + Don't Show This Anymore - - Selected tool is not a drill - - - - - Invalid Cutting Edge Angle %.2f, must be &gt;0° and &lt;=180° - - - - - Cutting Edge Angle (%.2f) results in negative tool tip length + + Invalid Filename @@ -952,75 +1486,60 @@ - + Parent job %s doesn't have a base object + + + No Tool Controller is selected. We need a tool to build a Path. + + + + + No Tool found or diameter is zero. We need a tool to build a Path. + + No Tool Controller selected. - + Tool Error - + + Tool Controller feedrates required to calculate the cycle time. + + + + Feedrate Error - + + Add Tool Controller Rapid Speeds on the SetupSheet for more accurate cycle times. + + + + Cycletime Error - + Base object %s.%s already in the list - + Base object %s.%s rejected by operation - - - Profile - - - - - Profile entire model, selected face(s) or selected edge(s) - - - - - The non-planar adaptive start is also unavailable. - - - - - Choose a Path Job - - - - - Feed(H) - - - - - Feed(V) - - - - - Invalid Filename - - CW @@ -1032,30 +1551,109 @@ - - Warning + + + %s is not a Base Model object of the job %s - - Ok + + Base shape %s already in the list - - Don't Show This Anymore + + This job contains Legacy tools. Legacy tools are deprecated. They will be removed after version 0.20 + + + + + Profile + + + + + Profile entire model, selected face(s) or selected edge(s) + + + + + Legacy tools are deprecated. They will be removed after version 0.20 + + + + + Legacy Tools not supported + + + + + Selected tool is not a drill + + + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + + + + Cutting Edge Angle (%.2f) results in negative tool tip length + + + + + + Edit + + + + + + Choose a Path Job + + + + + A planar adaptive start is unavailable. The non-planar will be attempted. + + + + + + The non-planar adaptive start is also unavailable. + + + + + Hole diameter may be inaccurate due to tessellation on face. Consider selecting hole edge. + + + + + Feature %s.%s cannot be processed as a circular hole - please remove from Base geometry list. + + + + + Feed(H) + + + + + Feed(V) PathAreaOp - + job %s has no Base. - + no job for op %s found. @@ -1067,9 +1665,20 @@ No base objects for PathArray. + + + Arrays of paths having different tool controllers are handled according to the tool controller of the first path. + + PathDeburr + + + The selected tool has no CuttingEdgeAngle property. Assuming Endmill + + + Round @@ -1089,7 +1698,7 @@ - + Creates a Fixture Offset object @@ -1097,12 +1706,12 @@ PathGeom - + face %s not handled, assuming not vertical - + edge %s not handled, assuming not vertical @@ -1117,15 +1726,20 @@ - + %s not supported for flipping + + + Zero working area to process. Check your selection and settings. + + PathGui - + %s has no property %s (%s)) @@ -1133,12 +1747,12 @@ PathJob - + Unsupported stock object %s - + Unsupported stock type %s (%d) @@ -1151,7 +1765,7 @@ - + Base Geometry @@ -1171,27 +1785,33 @@ - + Mulitiple operations are labeled as - + Base Location - + Heights - + + FinalDepth cannot be modified for this operation. +If it is necessary to set the FinalDepth manually please select a different operation. + + + + Depths - + Diameters @@ -1206,17 +1826,18 @@ - + Uncreate AreaOp Operation + Pick Start Point - + No suitable tool controller found. Aborting op creation @@ -1227,7 +1848,8 @@ Aborting op creation - + + Make False, to prevent operation from generating code @@ -1240,13 +1862,28 @@ Aborting op creation - + Create a Selection Plane object PathPocket + + + Pass Extension + + + + + The distance the facing operation will extend beyond the boundary shape. + + + + + Final depth set below ZMin of face(s) selected. + + Normal @@ -1262,20 +1899,17 @@ Aborting op creation Y - - - Pass Extension - - PathProfile + Outside + Inside @@ -1316,25 +1950,35 @@ Aborting op creation - + + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. + + + + Unable to create path for face(s). + + + Check edge selection and Final Depth requirements for profiling open edge(s). + + PathStock - + Invalid base object %s - no shape found - + Unsupported stock type named {} - + Unsupported PathStock template version {} @@ -1342,17 +1986,17 @@ Aborting op creation PathSurface - + This operation requires OpenCamLib to be installed. - + The GeometryTolerance for this Job is 0.0. - + Initializing LinearDeflection to 0.001 mm. @@ -1362,80 +2006,105 @@ Aborting op creation - + + Canceling 3D Surface operation. Error creating OCL cutter. + + + + operation time is - + Canceled 3D Surface operation. - + No profile geometry shape returned. - + No profile path geometry returned. - + No clearing shape returned. - + No clearing path geometry returned. - + No scan data to convert to Gcode. - + Failed to identify tool for operation. - + Failed to map selected tool to an OCL tool type. - + Failed to translate active tool to OCL tool type. + + + OCL tool not available. Cannot determine is cutter has tilt available. + + PathSurfaceSupport - + Shape appears to not be horizontal planar. - + Cannot calculate the Center Of Mass. - + Using Center of Boundbox instead. - + + Face selection is unavailable for Rotational scans. + + + + Ignoring selected faces. - + + Failed to pre-process base as a whole. + + + + + Failed to identify a horizontal cross-section for Face + + + + Diameter dimension missing from ToolBit shape. @@ -1443,7 +2112,7 @@ Aborting op creation PathToolBit - + Toolbit cannot be edited: Shapefile not found @@ -1451,22 +2120,22 @@ Aborting op creation PathToolLibraryManager - + Tooltable JSON (*.json) - + Tooltable XML (*.xml) - + HeeksCAD tooltable (*.tooltable) - + LinuxCNC tooltable (*.tbl) @@ -1481,50 +2150,84 @@ Aborting op creation - + + Unsupported Path tooltable template version %s + + + + Unsupported Path tooltable + + PathVcarve + + + The Job Base Object has no engraveable element. Engraving operation will produce no output. + + + PathWaterline - + New property added to - + Check default value(s). - + The GeometryTolerance for this Job is 0.0. - + Initializing LinearDeflection to 0.0001 mm. - + + + Sample interval limits are 0.0001 to 25.4 millimeters. + + + + Cut pattern angle limits are +-360 degrees. - + Cut pattern angle limits are +- 360 degrees. + + + AvoidLastX_Faces: Only zero or positive values permitted. + + + + + AvoidLastX_Faces: Avoid last X faces count limited to 100. + + No JOB - + + Canceling Waterline operation. Error creating OCL cutter. + + + + operation time is @@ -1532,13 +2235,23 @@ Aborting op creation Path_3dTools - + 3D Operations Path_Adaptive + + + Adaptive + + + + + Adaptive clearing and profiling + + Outside @@ -1559,16 +2272,6 @@ Aborting op creation Profiling - - - Adaptive - - - - - Adaptive clearing and profiling - - Path_Array @@ -1578,12 +2281,12 @@ Aborting op creation - + Creates an array from selected path(s) - + Arrays can be created only from Path operations. @@ -1596,7 +2299,7 @@ Aborting op creation - + Add a Comment to your CNC program @@ -1609,7 +2312,7 @@ Aborting op creation - + Creates a linked copy of another path @@ -1617,12 +2320,12 @@ Aborting op creation Path_Custom - + Custom - + Create custom gcode snippet @@ -1630,12 +2333,12 @@ Aborting op creation Path_Deburr - + Deburr - + Creates a Deburr Path along Edges or around Faces @@ -1643,19 +2346,22 @@ Aborting op creation Path_Dressup - + + Please select one path object - + + The selected object is not a path - + + Please select a Path object @@ -1668,7 +2374,7 @@ Aborting op creation - + Remap one axis to another. @@ -1681,12 +2387,17 @@ Aborting op creation - + + Creates a Dogbone Dress-up object from a selected path + + + + Please select one path object - + The selected object is not a path @@ -1694,22 +2405,27 @@ Aborting op creation Path_DressupDragKnife - + DragKnife Dress-up - + + Modifies a path to add dragknife corner actions + + + + Please select one path object - + The selected object is not a path - + Please select a Path object @@ -1742,7 +2458,7 @@ Aborting op creation - + Length/Radius positive not Null @@ -1752,17 +2468,22 @@ Aborting op creation - + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + + Please select one path object - + The selected object is not a path - + Please select a Profile object @@ -1850,18 +2571,23 @@ Aborting op creation Path_DressupPathBoundary - + + The selected object is not a path + + + + Boundary Dress-up - - Please select one path object + + Creates a Path Boundary Dress-up object from a selected path - - The selected object is not a path + + Please select one path object @@ -1888,17 +2614,17 @@ Aborting op creation - + Horizontal Feed Rate - + Vertical Feed Rate - + Ramp Feed Rate @@ -1908,22 +2634,27 @@ Aborting op creation - + RampEntry Dress-up - + + Creates a Ramp Entry Dress-up object from a selected path + + + + Please select one path object - + The selected object is not a path - + Please select a Profile object @@ -1931,17 +2662,7 @@ Aborting op creation Path_DressupTag - - The selected object is not a path - - - - - Please select a Profile object - - - - + Holding Tag @@ -1951,27 +2672,44 @@ Aborting op creation - + Creates a Tag Dress-up object from a selected path - + Please select one path object + + + Cannot insert holding tags for this path - please select a Profile path + + + + + + The selected object is not a path + + + + + + Please select a Profile object + + No Base object found. - + Base is not a Path::Feature object. - + Base doesn't have a Path to dress-up. @@ -1984,18 +2722,28 @@ Aborting op creation Path_DressupZCorrect - + Z Depth Correction Dress-up - + Use Probe Map to correct Z depth Path_Drilling + + + Drilling + + + + + Creates a Path Drilling object from a features of a base object + + G99 @@ -2021,21 +2769,16 @@ Aborting op creation 2x Drill Tip - - - Drilling - - Path_Engrave - + Engrave - + Creates an Engraving Path around a Draft ShapeString @@ -2043,8 +2786,9 @@ Aborting op creation Path_EngraveTools - + Engraving Operations + int = field(default=None) @@ -2055,6 +2799,11 @@ Aborting op creation Export Template + + + Exports Path Job as a template to be used for other jobs + + Path_Gcode_pre @@ -2071,16 +2820,6 @@ Aborting op creation Path_Helix - - - Helix - - - - - Creates a Path Helix object from a features of a base object - - CW @@ -2091,6 +2830,16 @@ Aborting op creation CCW + + + Helix + + + + + Creates a Path Helix object from a features of a base object + + Path_Hop @@ -2105,30 +2854,37 @@ Aborting op creation - + Please select one path object - + The selected object is not a path Path_Inspect + + + <b>Note</b>: This dialog shows Path Commands in FreeCAD base units (mm/s). + Values will be converted to the desired unit during post-processing. + + Inspect Path Commands - + Inspects the contents of a Path object - + + Please select exactly one path object @@ -2136,120 +2892,16 @@ Aborting op creation Path_Job - - Job - - - - - Creates a Path Job object - - - - - Edit - - - - - Stock not a cylinder! - - - - - Select Output File - - - - - All Files (*.*) - - - - - Unsupported stock object %s - - - - - Unsupported stock type %s (%d) - - - - - Model Selection - - - - - Warning - - - - - Please add one. - - - - - Ok - - - - - Add - - - - - This job has no base model. - - - - - This job has no tool. - - - - - Fixture - - - - - Tool - - - - - Operation + + Solids + 2D - - - 2.5D - - - - - Lathe - - - - - Multiaxis - - - - - Solids - - Jobs @@ -2270,6 +2922,111 @@ Aborting op creation Unsupported stock type + + + Job + + + + + Creates a Path Job object + + + + + Fixture + + + + + Tool + + + + + Operation + + + + + 2.5D + + + + + Lathe + + + + + Multiaxis + + + + + Edit + + + + + Stock not a cylinder! + + + + + Select Output File + + + + + All Files (*.*) + + + + + Unsupported stock object %s + + + + + Unsupported stock type %s (%d) + + + + + Model Selection + + + + + Warning + + + + + Please add one. + + + + + Ok + + + + + Add + + + + + This job has no base model. + + + + + This job has no tool. + + Path_Job: @@ -2282,12 +3039,12 @@ Aborting op creation Path_MillFace - + Face - + Create a Facing Operation from a model or face @@ -2295,7 +3052,8 @@ Aborting op creation Path_OpActiveToggle - + + Toggle the Active State of the Operation @@ -2321,43 +3079,14 @@ Aborting op creation Path_OperationCopy - + + Copy the operation in the job Path_Pocket - - - Boundbox - - - - - Face Region - - - - - Perimeter - - - - - Stock - - - - - Collectively - - - - - Individually - - Climb @@ -2403,16 +3132,46 @@ Aborting op creation Grid + + + Collectively + + + + + Individually + + + + + Boundbox + + + + + Face Region + + + + + Perimeter + + + + + Stock + + Path_Pocket3D - + 3D Pocket - + Creates a Path 3D Pocket object from a face or faces @@ -2420,12 +3179,12 @@ Aborting op creation Path_Pocket_Shape - + Pocket Shape - + Creates a Path Pocket object from a face or faces @@ -2454,27 +3213,28 @@ Aborting op creation Path_Probe - + Select Probe Point File - + + All Files (*.*) - + Select Output File - + Probe - + Create a Probing Grid from a job stock @@ -2482,12 +3242,16 @@ Aborting op creation Path_Profile - + + + Profile - + + + Profile entire model, selected face(s) or selected edge(s) @@ -2499,231 +3263,238 @@ Aborting op creation PropertyBag + + + Creates an object which can be used to store reference properties. + + Path_Sanity - + + Check the path job for common errors - + Base Object(s) - + Job Sequence - + Job Description - + Job Type - + CAD File Name - + Last Save Date - + Customer - + Designer - + + Operation - + Minimum Z Height - + Maximum Z Height - + Cycle Time - + Coolant - + TOTAL JOB - + Tool Number - + Description - + Manufacturer - + Part Number - + URL - + Inspection Notes - + Tool Controller - + Feed Rate - + Spindle Speed - + Tool Shape - + Tool Diameter - + X Size - + Y Size - + Z Size - + Material - + Work Offsets - + Order By - + Part Datum - + Gcode File - + Last Post Process Date - + Stops - + Programmer - + Machine - + Postprocessor - + Post Processor Flags - + File Size (kbs) - + Line Count - + Note - + Operator - + Date @@ -2736,17 +3507,17 @@ Aborting op creation - + Complete loop selection from two edges - + Feature Completion - + Closed loop detection failed. @@ -2759,12 +3530,13 @@ Aborting op creation - + Creates a non-parametric copy of another path - + + Please select exactly one path object @@ -2777,7 +3549,7 @@ Aborting op creation - + Simulate Path G-Code on stock @@ -2785,12 +3557,12 @@ Aborting op creation Path_Slot - + New property added to - + Check default value(s). @@ -2825,21 +3597,25 @@ Aborting op creation + Center of Mass - + + Center of BoundBox + Lowest Point + Highest Point @@ -2855,97 +3631,116 @@ Aborting op creation + Vertex - + No Base Geometry object in the operation. - + Custom points are identical. - + Custom points not at same Z height. - + + Current Extend Radius value produces negative arc radius. + + + + No path extensions available for full circles. - + + operation collides with model. - + + Verify slot path start and end points. - + The selected face is inaccessible. - + + Only a vertex selected. Add another feature to the Base Geometry. + + + + A single selected face must have four edges minimum. - + No parallel edges identified. - + value error. - + Current tool larger than arc diameter. - + + Failed, slot from edge only accepts lines, arcs and circles. + + + + Failed to determine point 1 from - + Failed to determine point 2 from - + Selected geometry not parallel. - + The selected face is not oriented vertically: - + + Current offset value produces negative radius. - + Slot - + Create a Slot operation from selected geometry or custom points. @@ -2958,7 +3753,7 @@ Aborting op creation - + Add Optional or Mandatory Stop to the program @@ -3036,11 +3831,13 @@ Aborting op creation + X + Y @@ -3096,12 +3893,12 @@ Aborting op creation - + 3D Surface - + Create a 3D Surface Operation from a model @@ -3109,95 +3906,102 @@ Aborting op creation Path_ThreadMilling - - Thread Milling - - - - + Custom External - + Custom Internal - + Imperial External (2A) - + Imperial External (3A) - + Imperial Internal (2B) - + Imperial Internal (3B) - + Metric External (4G6G) - + Metric External (6G) - + Metric Internal (6H) - + LeftHand - + RightHand - + Climb - + Conventional + + + Thread Milling + + + + + Creates a Path Thread Milling operation from features of a base object + + Path_ToolBit - + Choose a writable location for your toolbits - + + Tooltable JSON (*.fctl) - + + Save toolbit library - + LinuxCNC tooltable (*.tbl) @@ -3210,7 +4014,7 @@ Aborting op creation - + Creates a new ToolBit object @@ -3231,12 +4035,12 @@ Aborting op creation Path_ToolBitLibraryOpen - + ToolBit Library editor - + Open an editor to manage ToolBit libraries @@ -3249,7 +4053,7 @@ Aborting op creation - + Load an existing ToolBit object from a file @@ -3257,12 +4061,12 @@ Aborting op creation Path_ToolBitSave - + Save Tool - + Save an existing ToolBit object to a file @@ -3270,23 +4074,13 @@ Aborting op creation Path_ToolBitSaveAs - + Save Tool as... Path_ToolController - - - Add Tool Controller to the Job - - - - - Add Tool Controller - - Forward @@ -3302,45 +4096,56 @@ Aborting op creation None + + + Add Tool Controller to the Job + + + + + Add Tool Controller + + Path_ToolTable - + Open tooltable - + Save tooltable - + Rename Tooltable - + Enter Name: - + Add New Tool Table - + Delete Selected Tool Table - + Rename Selected Tool Table + Tool Manager @@ -3349,30 +4154,35 @@ Aborting op creation Path_Vcarve - + + VCarve requires an engraving cutter with CuttingEdgeAngle + + + + + Engraver Cutting Edge Angle must be < 180 degrees. + + + + Vcarve - + Creates a medial line engraving path - - - Engraver Cutting Edge Angle must be < 180 degrees. - - Path_Waterline - + Waterline - + Create a Waterline Operation from a model @@ -3390,42 +4200,50 @@ Aborting op creation - + New Operations - + + Path Modification - + Helpful Tools - + + + + + + + + &Path - + Path Dressup - + Supplemental Commands - + Specialty Operations - + Utils @@ -3433,7 +4251,7 @@ Aborting op creation path_waterline - + This operation requires OpenCamLib to be installed. @@ -3483,31 +4301,37 @@ Aborting op creation + Circular + CircularZigZag + Line + Offset + Spiral + ZigZag diff --git a/src/Mod/Points/Gui/Resources/translations/Points.ts b/src/Mod/Points/Gui/Resources/translations/Points.ts index 328471c2f9..e88a057e4a 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points.ts @@ -139,14 +139,6 @@ Special lines - - Ignore lines starting with: - - - - Cluster by lines starting with: - - First line: @@ -159,10 +151,54 @@ Number of points + + Cluster by lines starting with: + + + + Ignore lines starting with: + + Point format + + Number separator: + + + + , + + + + ; + + + + \t + + + + \w + + + + Points format: + + + + X,Y,Z + + + + X,Y + + + + Next block: + + none @@ -183,42 +219,6 @@ I (Gray value) - - Number separator: - - - - Next block: - - - - , - - - - ; - - - - \t - - - - \w - - - - X,Y,Z - - - - X,Y - - - - Points format: - - Preview diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts index 77d8dfa8e5..be74d873d3 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts @@ -267,22 +267,6 @@ Do you want to continue? Raytracing - - Mesh export settings - - - - Max mesh deviation: - - - - Do not calculate vertex normals - - - - Write u,v coordinates - - Render @@ -332,11 +316,7 @@ Do you want to continue? - Part file name: - - - - Camera file name: + Default Project dir: @@ -344,17 +324,37 @@ Do you want to continue? - Default Project dir: + Camera file name: TempCamera.inc + + Part file name: + + TempPart.inc + + Mesh export settings + + + + Max mesh deviation: + + + + Do not calculate vertex normals + + + + Write u,v coordinates + + RaytracingGui::DlgSettingsRayImp diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts index 5b855d11a9..5a0c993832 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts @@ -239,6 +239,14 @@ Size factor + + User-defined u/v directions + + + + Create placement + + Smoothing @@ -259,14 +267,6 @@ Curvature variation - - User-defined u/v directions - - - - Create placement - - ReenGui::FitBSplineSurfaceWidget @@ -338,10 +338,6 @@ Mesh segmentation - - Create compound - - Smooth mesh @@ -366,6 +362,10 @@ Create mesh from unused triangles + + Create compound + + ReverseEngineeringGui::SegmentationManual @@ -377,20 +377,16 @@ Select - - Components - - Region - Select whole component + All - Pick triangle + Components @@ -398,7 +394,11 @@ - All + Pick triangle + + + + Select whole component @@ -409,6 +409,10 @@ Plane + + Detect + + Tolerance @@ -417,10 +421,6 @@ Minimum number of faces - - Detect - - Cylinder diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 5765139107..d4dfdc7cfc 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -9,7 +9,7 @@ - + Creates a hexagonal profile in the sketch diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts index 05617f8719..55502fd19d 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts @@ -9,6 +9,7 @@ + Cell @@ -54,6 +55,7 @@ + Add property controller @@ -67,7 +69,7 @@ - + Adds a cell controller to a selected spreadsheet @@ -80,7 +82,7 @@ - + Adds a spreadsheet object to the active document @@ -93,7 +95,7 @@ - + Adds a property controller to a selected spreadsheet diff --git a/src/Mod/Start/Gui/Resources/translations/Start.ts b/src/Mod/Start/Gui/Resources/translations/Start.ts index db0f3ab061..547825820b 100644 --- a/src/Mod/Start/Gui/Resources/translations/Start.ts +++ b/src/Mod/Start/Gui/Resources/translations/Start.ts @@ -4,212 +4,212 @@ StartPage - + Start - + Documents - + Help - + Activity - + Recent files - + Tip - + Adjust the number of recent files to be shown here in menu Edit -> Preferences -> General -> Size of recent file list - + Examples - + General documentation - + User hub - + This section contains documentation useful for FreeCAD users in general: a list of all the workbenches, detailed instructions on how to install and use the FreeCAD application, tutorials, and all you need to get started. - + Power users hub - + This section gathers documentation for advanced users and people interested in writing python scripts. You will also find there a repository of macros, instructions on how to install and use them, and more information about customizing FreeCAD to your specific needs. - + Developers hub - + This section contains material for developers: How to compile FreeCAD yourself, how the FreeCAD source code is structured + how to navigate in it, how to develop new workbenches and/or embed FreeCAD in your own application. - + Manual - + The FreeCAD manual is another, more linear way to present the information contained in this wiki. It is made to be read like a book, and will gently introduce you to many other pages from the hubs above. <a href="https://www.gitbook.com/book/yorikvanhavre/a-freecad-manual/details">e-book versions</a> are also available. - + Workbenches documentation - + These are the help pages of all the workbenches currently installed on this computer. - + Getting help from the community - + The <a href="http://forum.freecadweb.org">FreeCAD forum</a> is a great place to get help from other FreeCAD users and developers. The forum has many sections for different types of issues and discussion subjects. If in doubt, post in the more general <a href="https://forum.freecadweb.org/viewforum.php?f=3">Help on using FreeCAD</a> section. - + If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! - + FreeCAD also maintains a public <a href="https://www.freecadweb.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecadweb.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. - + Available addons - + Below is a list of available extra workbenches that can be added to your FreeCAD installation. Browse and install them from menu Tools -> Addons manager. You can learn more about any of them by clicking the links below. - + If not bundled with your FreeCAD version, install the FreeCAD documentation package to get documentation hubs, workbench help and individual command documentation without an internet connection. - + Cannot fetch information from GitHub. <a href="EnableDownload.py">Authorize FreeCAD to access the internet</a> and reload the Start page. - + Recent commits - + Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecadweb.org/wiki/Downloads">available options</a> if you wish to obtain a development version. - + See all commits on github - + You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder - + version - + build - + Create new... - + Unknown - + Forum - + The latest posts on the <a href="https://forum.freecadweb.org">FreeCAD forum</a>: - + To open any of the links above in your desktop browser, Right-click -> Open in external browser - + Creation date - + Last modification - + Notes - + Open start page preferences diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 4827ded6cc..cb1011f4c2 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -9,7 +9,7 @@ - + Move a View to a new Page @@ -34,6 +34,7 @@ + Select Page @@ -46,16 +47,6 @@ ShareView - - - Share View - - - - - Share a View on a second Page - - Share View with another Page @@ -82,6 +73,7 @@ + Select Page @@ -91,6 +83,16 @@ Select To Page. + + + Share View + + + + + Share a View on a second Page + + Cmd2LineCenterLine @@ -1106,13 +1108,13 @@ - Insert '〼' Prefix + Insert '□' Prefix - Insert a '〼' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool + Insert a '□' symbol at the beginning of the dimension text:<br>- Select one or more dimensions<br>- Click this tool @@ -2066,7 +2068,7 @@ - + Edit SectionView @@ -3137,7 +3139,7 @@ - + Operation Failed @@ -5354,7 +5356,7 @@ Do you want to continue? - + GD&T @@ -7163,7 +7165,7 @@ using the given X/Y Spacing - + Can not continue. Object * %1 * not found. diff --git a/src/Mod/Test/Gui/Resources/translations/Test.ts b/src/Mod/Test/Gui/Resources/translations/Test.ts index 8591bf0150..e064fd361a 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test.ts @@ -4,78 +4,97 @@ TestGui::UnitTest + FreeCAD UnitTest + Test + Select test name: + &Start + Alt+S + &Help + F1 + &About + Alt+A + &Close + Alt+C + Progress + Run: + Failures: + Errors: + Remaining: + Failures and errors + Description + Idle @@ -83,10 +102,12 @@ TestGui::UnitTestDialog + Help + Enter the name of a callable object which, when called, will return a TestCase. Click 'start', and the test thus produced will be run. @@ -94,10 +115,12 @@ Double click on an error in the tree view to see more information about it, incl + About FreeCAD UnitTest + Copyright (c) Werner Mayer FreeCAD UnitTest is part of FreeCAD and supports writing Unit Tests for ones own modules. diff --git a/src/Mod/Tux/Resources/translations/Tux.ts b/src/Mod/Tux/Resources/translations/Tux.ts index c5217b8f05..44b77a4432 100644 --- a/src/Mod/Tux/Resources/translations/Tux.ts +++ b/src/Mod/Tux/Resources/translations/Tux.ts @@ -4,57 +4,57 @@ NavigationIndicator - + Select - + Zoom - + Rotate - + Pan - + Tilt - + Navigation style - + Page Up or Page Down key. - + Rotation focus - + Middle mouse button or H key. - + Middle mouse button. - + Navigation style not recognized.