diff --git a/src/Mod/Fem/CMakeLists.txt b/src/Mod/Fem/CMakeLists.txt
index 8ca599d848..6c4b446bf9 100755
--- a/src/Mod/Fem/CMakeLists.txt
+++ b/src/Mod/Fem/CMakeLists.txt
@@ -96,8 +96,6 @@ SET(FemExamples_SRCS
     femexamples/square_pipe_end_twisted_edgeforces.py
     femexamples/square_pipe_end_twisted_nodeforces.py
     femexamples/thermomech_bimetall.py
-    femexamples/thermomech_flow1d.py
-    femexamples/thermomech_spine.py
     femexamples/truss_3d_cs_circle_ele_seg2.py
     femexamples/truss_3d_cs_circle_ele_seg3.py
 )
@@ -135,8 +133,6 @@ SET(FemExampleMeshes_SRCS
     femexamples/meshes/mesh_selfweight_cantilever_tetra10.py
     femexamples/meshes/mesh_square_pipe_end_twisted_tria6.py
     femexamples/meshes/mesh_thermomech_bimetall_tetra10.py
-    femexamples/meshes/mesh_thermomech_flow1d_seg3.py
-    femexamples/meshes/mesh_thermomech_spine_tetra10.py
     femexamples/meshes/mesh_transform_beam_hinged_tetra10.py
     femexamples/meshes/mesh_transform_torque_tetra10.py
     femexamples/meshes/mesh_truss_crane_seg2.py
@@ -381,17 +377,6 @@ SET(FemTestsCcx_SRCS
     femtest/data/calculix/square_pipe_end_twisted_edgeforces.inp
     femtest/data/calculix/square_pipe_end_twisted_nodeforces.inp
     femtest/data/calculix/thermomech_bimetall.inp
-    femtest/data/calculix/thermomech_flow1D.inp
-    femtest/data/calculix/thermomech_flow1D.dat
-    femtest/data/calculix/thermomech_flow1D.frd
-    femtest/data/calculix/thermomech_flow1D_expected_values
-    femtest/data/calculix/thermomech_flow1D_inout_nodes.txt
-    femtest/data/calculix/thermomech_flow1D.FCStd
-    femtest/data/calculix/thermomech_spine.inp
-    femtest/data/calculix/thermomech_spine.dat
-    femtest/data/calculix/thermomech_spine.frd
-    femtest/data/calculix/thermomech_spine_expected_values
-    femtest/data/calculix/thermomech_spine.FCStd
 )
 
 SET(FemTestsElmer_SRCS
diff --git a/src/Mod/Fem/femexamples/manager.py b/src/Mod/Fem/femexamples/manager.py
index ac464c0713..7465f5428d 100644
--- a/src/Mod/Fem/femexamples/manager.py
+++ b/src/Mod/Fem/femexamples/manager.py
@@ -87,8 +87,6 @@ def run_all():
     run_example("square_pipe_end_twisted_edgeforces", run_solver=True)
     run_example("square_pipe_end_twisted_nodeforces", run_solver=True)
     run_example("thermomech_bimetall", run_solver=True)
-    run_example("thermomech_flow1d", run_solver=True)
-    run_example("thermomech_spine", run_solver=True)
 
 
 def setup_all():
@@ -127,8 +125,6 @@ def setup_all():
     run_example("square_pipe_end_twisted_edgeforces")
     run_example("square_pipe_end_twisted_nodeforces")
     run_example("thermomech_bimetall")
-    run_example("thermomech_flow1d")
-    run_example("thermomech_spine")
 
 
 def run_analysis(doc, base_name, filepath="", run_solver=False):
diff --git a/src/Mod/Fem/femexamples/thermomech_flow1d.py b/src/Mod/Fem/femexamples/thermomech_flow1d.py
deleted file mode 100644
index c13151005e..0000000000
--- a/src/Mod/Fem/femexamples/thermomech_flow1d.py
+++ /dev/null
@@ -1,271 +0,0 @@
-# ***************************************************************************
-# *   Copyright (c) 2019 Bernd Hahnebach <bernd@bimstatik.org>              *
-# *   Copyright (c) 2020 Sudhanshu Dubey <sudhanshu.thethunder@gmail.com    *
-# *                                                                         *
-# *   This file is part of the FreeCAD CAx development system.              *
-# *                                                                         *
-# *   This program is free software; you can redistribute it and/or modify  *
-# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
-# *   as published by the Free Software Foundation; either version 2 of     *
-# *   the License, or (at your option) any later version.                   *
-# *   for detail see the LICENCE text file.                                 *
-# *                                                                         *
-# *   This program is distributed in the hope that it will be useful,       *
-# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
-# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
-# *   GNU Library General Public License for more details.                  *
-# *                                                                         *
-# *   You should have received a copy of the GNU Library General Public     *
-# *   License along with this program; if not, write to the Free Software   *
-# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
-# *   USA                                                                   *
-# *                                                                         *
-# ***************************************************************************
-
-import FreeCAD
-from FreeCAD import Vector as vec
-
-from Draft import makeWire
-
-import Fem
-import ObjectsFem
-
-from . import manager
-from .manager import get_meshname
-from .manager import init_doc
-
-
-def get_information():
-    return {
-        "name": "Thermomech Flow 1D",
-        "meshtype": "edge",
-        "meshelement": "Seg3",
-        "constraints": ["self weight"],
-        "solvers": ["calculix", "ccxtools"],
-        "material": "fluid",
-        "equations": ["thermomechanical"]
-    }
-
-
-def get_explanation(header=""):
-    return header + """
-
-To run the example from Python console use:
-from femexamples.thermomech_flow1d import setup
-setup()
-
-
-See forum topic post:
-https://forum.freecad.org/viewtopic.php?f=18&t=20076
-
-
-"""
-
-
-def setup(doc=None, solvertype="ccxtools"):
-
-    # init FreeCAD document
-    if doc is None:
-        doc = init_doc()
-
-    # explanation object
-    # just keep the following line and change text string in get_explanation method
-    manager.add_explanation_obj(doc, get_explanation(manager.get_header(get_information())))
-
-    # geometric objects
-    p1 = vec(0, 0, 50)
-    p2 = vec(0, 0, -50)
-    p3 = vec(0, 0, -4300)
-    p4 = vec(4950, 0, -4300)
-    p5 = vec(5000, 0, -4300)
-    p6 = vec(8535.53, 0, -7835.53)
-    p7 = vec(8569.88, 0, -7870.88)
-    p8 = vec(12105.41, 0, -11406.41)
-    p9 = vec(12140.76, 0, -11441.76)
-    p10 = vec(13908.53, 0, -13209.53)
-    p11 = vec(13943.88, 0, -13244.88)
-    p12 = vec(15046.97, 0, -14347.97)
-    p13 = vec(15046.97, 0, -7947.97)
-    p14 = vec(15046.97, 0, -7847.97)
-    p15 = vec(0, 0, 0)
-    p16 = vec(0, 0, -2175)
-    p17 = vec(2475, 0, -4300)
-    p18 = vec(4975, 0, -4300)
-    p19 = vec(6767.765, 0, -6067.765)
-    p20 = vec(8552.705, 0, -7853.205)
-    p21 = vec(10337.645, 0, -9638.645)
-    p22 = vec(12123.085, 0, -11424.085)
-    p23 = vec(13024.645, 0, -12325.645)
-    p24 = vec(13926.205, 0, -13227.205)
-    p25 = vec(14495.425, 0, -13796.425)
-    p26 = vec(15046.97, 0, -11147.97)
-    p27 = vec(15046.97, 0, -7897.97)
-    points = [
-        p1, p2, p3, p4, p5, p6, p7, p8, p9, p10,
-        p11, p12, p13, p14, p15, p16, p17, p18, p19, p20,
-        p21, p22, p23, p24, p25, p26, p27
-    ]
-    geom_obj = makeWire(
-        points,
-        closed=False,
-        face=False,
-        support=None
-    )
-    doc.recompute()
-
-    if FreeCAD.GuiUp:
-        geom_obj.ViewObject.Document.activeView().viewAxonometric()
-        geom_obj.ViewObject.Document.activeView().fitAll()
-
-    # analysis
-    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
-
-    # solver
-    if solvertype == "calculix":
-        solver_obj = analysis.addObject(
-            ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-        )[0]
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
-        solver_obj.WorkingDir = u""
-    else:
-        FreeCAD.Console.PrintWarning(
-            "Unknown or unsupported solver type: {}. "
-            "No solver object was created.\n".format(solvertype)
-        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
-        solver_obj.SplitInputWriter = False
-        solver_obj.AnalysisType = "thermomech"
-        solver_obj.GeometricalNonlinearity = "linear"
-        solver_obj.ThermoMechSteadyState = True
-        solver_obj.MatrixSolverType = "default"
-        solver_obj.IterationsThermoMechMaximum = 2000
-        solver_obj.IterationsControlParameterTimeUse = False
-    analysis.addObject(solver_obj)
-
-    # material
-    material_obj = ObjectsFem.makeMaterialFluid(doc, "FluidMaterial")
-    mat = material_obj.Material
-    mat["Name"] = "Water"
-    mat["Density"] = "998 kg/m^3"
-    mat["SpecificHeat"] = "4182 J/kg/K"
-    mat["DynamicViscosity"] = "1.003e-3 kg/m/s"
-    mat["ThermalExpansionCoefficient"] = "2.07e-4 m/m/K"
-    mat["ThermalConductivity"] = "0.591 W/m/K"
-    material_obj.Material = mat
-    analysis.addObject(material_obj)
-
-    inlet = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    inlet.SectionType = "Liquid"
-    inlet.LiquidSectionType = "PIPE INLET"
-    inlet.InletPressure = 0.1
-    inlet.References = [(geom_obj, "Edge1")]
-    analysis.addObject(inlet)
-
-    entrance = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    entrance.SectionType = "Liquid"
-    entrance.LiquidSectionType = "PIPE ENTRANCE"
-    entrance.EntrancePipeArea = 31416.00
-    entrance.EntranceArea = 25133.00
-    entrance.References = [(geom_obj, "Edge2")]
-    analysis.addObject(entrance)
-
-    manning1 = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    manning1.SectionType = "Liquid"
-    manning1.LiquidSectionType = "PIPE MANNING"
-    manning1.ManningArea = 31416
-    manning1.ManningRadius = 50
-    manning1.ManningCoefficient = 0.002
-    manning1.References = [(geom_obj, "Edge3"), (geom_obj, "Edge5")]
-    analysis.addObject(manning1)
-
-    bend = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    bend.SectionType = "Liquid"
-    bend.LiquidSectionType = "PIPE BEND"
-    bend.BendPipeArea = 31416
-    bend.BendRadiusDiameter = 1.5
-    bend.BendAngle = 45
-    bend.BendLossCoefficient = 0.4
-    bend.References = [(geom_obj, "Edge4")]
-    analysis.addObject(bend)
-
-    enlargement1 = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    enlargement1.SectionType = "Liquid"
-    enlargement1.LiquidSectionType = "PIPE ENLARGEMENT"
-    enlargement1.EnlargeArea1 = 31416.00
-    enlargement1.EnlargeArea2 = 70686.00
-    enlargement1.References = [(geom_obj, "Edge6")]
-    analysis.addObject(enlargement1)
-
-    manning2 = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    manning2.SectionType = "Liquid"
-    manning2.LiquidSectionType = "PIPE MANNING"
-    manning2.ManningArea = 70686.00
-    manning2.ManningRadius = 75
-    manning2.ManningCoefficient = 0.002
-    manning2.References = [(geom_obj, "Edge7")]
-    analysis.addObject(manning2)
-
-    contraction = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    contraction.SectionType = "Liquid"
-    contraction.LiquidSectionType = "PIPE CONTRACTION"
-    contraction.ContractArea1 = 70686
-    contraction.ContractArea2 = 17671
-    contraction.References = [(geom_obj, "Edge8")]
-    analysis.addObject(contraction)
-
-    manning3 = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    manning3.SectionType = "Liquid"
-    manning3.LiquidSectionType = "PIPE MANNING"
-    manning3.ManningArea = 17671.00
-    manning3.ManningRadius = 37.5
-    manning3.ManningCoefficient = 0.002
-    manning3.References = [(geom_obj, "Edge11"), (geom_obj, "Edge9")]
-    analysis.addObject(manning3)
-
-    gate_valve = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    gate_valve.SectionType = "Liquid"
-    gate_valve.LiquidSectionType = "PIPE GATE VALVE"
-    gate_valve.GateValvePipeArea = 17671
-    gate_valve.GateValveClosingCoeff = 0.5
-    gate_valve.References = [(geom_obj, "Edge10")]
-    analysis.addObject(gate_valve)
-
-    enlargement2 = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    enlargement2.SectionType = "Liquid"
-    enlargement2.LiquidSectionType = "PIPE ENLARGEMENT"
-    enlargement2.EnlargeArea1 = 17671
-    enlargement2.EnlargeArea2 = 1e12
-    enlargement2.References = [(geom_obj, "Edge12")]
-    analysis.addObject(enlargement2)
-
-    outlet = ObjectsFem.makeElementFluid1D(doc, "ElementFluid1D")
-    outlet.SectionType = "Liquid"
-    outlet.LiquidSectionType = "PIPE OUTLET"
-    outlet.OutletPressure = 0.1
-    outlet.References = [(geom_obj, "Edge13")]
-    analysis.addObject(outlet)
-
-    # self_weight_constraint
-    self_weight = ObjectsFem.makeConstraintSelfWeight(doc, "ConstraintSelfWeight")
-    self_weight.Gravity_x = 0.0
-    self_weight.Gravity_y = 0.0
-    self_weight.Gravity_z = -1.0
-    analysis.addObject(self_weight)
-
-    # mesh
-    from .meshes.mesh_thermomech_flow1d_seg3 import create_nodes, create_elements
-    fem_mesh = Fem.FemMesh()
-    control = create_nodes(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating nodes.\n")
-    control = create_elements(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating elements.\n")
-    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
-    femmesh_obj.FemMesh = fem_mesh
-    femmesh_obj.Part = geom_obj
-    femmesh_obj.SecondOrderLinear = False
-
-    doc.recompute()
-    return doc
diff --git a/src/Mod/Fem/femexamples/thermomech_spine.py b/src/Mod/Fem/femexamples/thermomech_spine.py
deleted file mode 100644
index 00b81d9ebf..0000000000
--- a/src/Mod/Fem/femexamples/thermomech_spine.py
+++ /dev/null
@@ -1,166 +0,0 @@
-# ***************************************************************************
-# *   Copyright (c) 2019 Bernd Hahnebach <bernd@bimstatik.org>              *
-# *   Copyright (c) 2020 Sudhanshu Dubey <sudhanshu.thethunder@gmail.com    *
-# *                                                                         *
-# *   This file is part of the FreeCAD CAx development system.              *
-# *                                                                         *
-# *   This program is free software; you can redistribute it and/or modify  *
-# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
-# *   as published by the Free Software Foundation; either version 2 of     *
-# *   the License, or (at your option) any later version.                   *
-# *   for detail see the LICENCE text file.                                 *
-# *                                                                         *
-# *   This program is distributed in the hope that it will be useful,       *
-# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
-# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
-# *   GNU Library General Public License for more details.                  *
-# *                                                                         *
-# *   You should have received a copy of the GNU Library General Public     *
-# *   License along with this program; if not, write to the Free Software   *
-# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
-# *   USA                                                                   *
-# *                                                                         *
-# ***************************************************************************
-
-import FreeCAD
-
-import Fem
-import ObjectsFem
-
-from . import manager
-from .manager import get_meshname
-from .manager import init_doc
-
-
-def get_information():
-    return {
-        "name": "Thermomech Spine",
-        "meshtype": "solid",
-        "meshelement": "Tet10",
-        "constraints": ["fixed", "initial temperature", "temperature", "heatflux"],
-        "solvers": ["calculix", "ccxtools"],
-        "material": "solid",
-        "equations": ["thermomechanical"]
-    }
-
-
-def get_explanation(header=""):
-    return header + """
-
-To run the example from Python console use:
-from femexamples.thermomech_spine import setup
-setup()
-
-
-See forum topic post:
-...
-
-"""
-
-
-def setup(doc=None, solvertype="ccxtools"):
-
-    # init FreeCAD document
-    if doc is None:
-        doc = init_doc()
-
-    # explanation object
-    # just keep the following line and change text string in get_explanation method
-    manager.add_explanation_obj(doc, get_explanation(manager.get_header(get_information())))
-
-    # geometric object
-    geom_obj = doc.addObject("Part::Box", "Box")
-    geom_obj.Height = 25.4
-    geom_obj.Width = 25.4
-    geom_obj.Length = 203.2
-    doc.recompute()
-
-    if FreeCAD.GuiUp:
-        geom_obj.ViewObject.Document.activeView().viewAxonometric()
-        geom_obj.ViewObject.Document.activeView().fitAll()
-
-    # analysis
-    analysis = ObjectsFem.makeAnalysis(doc, "Analysis")
-
-    # solver
-    if solvertype == "calculix":
-        solver_obj = ObjectsFem.makeSolverCalculix(doc, "SolverCalculiX")
-    elif solvertype == "ccxtools":
-        solver_obj = ObjectsFem.makeSolverCalculixCcxTools(doc, "CalculiXccxTools")
-        solver_obj.WorkingDir = u""
-    # should be possible with elmer too
-    # elif solvertype == "elmer":
-    #     analysis.addObject(ObjectsFem.makeSolverElmer(doc, "SolverElmer"))
-    else:
-        FreeCAD.Console.PrintWarning(
-            "Unknown or unsupported solver type: {}. "
-            "No solver object was created.\n".format(solvertype)
-        )
-    if solvertype == "calculix" or solvertype == "ccxtools":
-        solver_obj.SplitInputWriter = False
-        solver_obj.AnalysisType = "thermomech"
-        solver_obj.GeometricalNonlinearity = "linear"
-        solver_obj.ThermoMechSteadyState = True
-        solver_obj.MatrixSolverType = "default"
-        solver_obj.IterationsThermoMechMaximum = 2000
-        solver_obj.IterationsControlParameterTimeUse = True
-    analysis.addObject(solver_obj)
-
-    # material
-    material_obj = ObjectsFem.makeMaterialSolid(doc, "MechanicalMaterial")
-    mat = material_obj.Material
-    mat["Name"] = "Steel-Generic"
-    mat["YoungsModulus"] = "200000 MPa"
-    mat["PoissonRatio"] = "0.30"
-    mat["Density"] = "7900 kg/m^3"
-    mat["ThermalConductivity"] = "43.27 W/m/K"  # SvdW: Change to Ansys model values
-    mat["ThermalExpansionCoefficient"] = "12 um/m/K"
-    mat["SpecificHeat"] = "500 J/kg/K"  # SvdW: Change to Ansys model values
-    material_obj.Material = mat
-    analysis.addObject(material_obj)
-
-    # constraint fixed
-    con_fixed = ObjectsFem.makeConstraintFixed(doc, "FemConstraintFixed")
-    con_fixed.References = [(geom_obj, "Face1")]
-    analysis.addObject(con_fixed)
-
-    # constraint initialtemperature
-    name_inittemp = "FemConstraintInitialTemperature"
-    con_inittemp = ObjectsFem.makeConstraintInitialTemperature(doc, name_inittemp)
-    con_inittemp.initialTemperature = 300.0
-    analysis.addObject(con_inittemp)
-
-    # constraint temperature
-    con_temp = ObjectsFem.makeConstraintTemperature(doc, "FemConstraintTemperature")
-    con_temp.References = [(geom_obj, "Face1")]
-    con_temp.Temperature = 310.93
-    analysis.addObject(con_temp)
-
-    # constraint heatflux
-    con_heatflux = ObjectsFem.makeConstraintHeatflux(doc, "FemConstraintHeatflux")
-    con_heatflux.References = [
-        (geom_obj, "Face3"),
-        (geom_obj, "Face4"),
-        (geom_obj, "Face5"),
-        (geom_obj, "Face6")
-    ]
-    con_heatflux.AmbientTemp = 255.3722
-    con_heatflux.FilmCoef = 5.678
-    analysis.addObject(con_heatflux)
-
-    # mesh
-    from .meshes.mesh_thermomech_spine_tetra10 import create_nodes, create_elements
-    fem_mesh = Fem.FemMesh()
-    control = create_nodes(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating nodes.\n")
-    control = create_elements(fem_mesh)
-    if not control:
-        FreeCAD.Console.PrintError("Error on creating elements.\n")
-    femmesh_obj = analysis.addObject(ObjectsFem.makeMeshGmsh(doc, get_meshname()))[0]
-    femmesh_obj.FemMesh = fem_mesh
-    femmesh_obj.Part = geom_obj
-    femmesh_obj.SecondOrderLinear = False
-
-    doc.recompute()
-    return doc
diff --git a/src/Mod/Fem/femtest/app/test_ccxtools.py b/src/Mod/Fem/femtest/app/test_ccxtools.py
index ab502355c4..f0f4478df4 100644
--- a/src/Mod/Fem/femtest/app/test_ccxtools.py
+++ b/src/Mod/Fem/femtest/app/test_ccxtools.py
@@ -135,62 +135,6 @@ class TestCcxTools(unittest.TestCase):
             res_obj_name=res_obj_name,
         )
 
-    # ********************************************************************************************
-    def test_thermomech_flow1D(
-        self
-    ):
-        # set up
-        from femexamples.thermomech_flow1d import setup
-        setup(self.document, "ccxtools")
-        base_name = get_namefromdef("test_")
-        res_obj_name = "CCX_Time_1_0_Results"
-        analysis_dir = testtools.get_fem_test_tmp_dir(self.pre_dir_name + base_name)
-
-        # test input file writing
-        fea = self.input_file_writing_test(
-            None,
-            base_name,
-            analysis_dir=analysis_dir,
-            test_end=True,
-        )
-
-        # test result reading
-        self.result_reading_test(
-            None,
-            base_name,
-            analysis_dir=analysis_dir,
-            fea=fea,
-            res_obj_name=res_obj_name,
-        )
-
-    # ********************************************************************************************
-    def test_thermomech_spine(
-        self
-    ):
-        # set up
-        from femexamples.thermomech_spine import setup
-        setup(self.document, "ccxtools")
-        base_name = get_namefromdef("test_")
-        res_obj_name = "CCX_Results"
-        analysis_dir = testtools.get_fem_test_tmp_dir(self.pre_dir_name + base_name)
-
-        # test input file writing
-        fea = self.input_file_writing_test(
-            None,
-            base_name,
-            analysis_dir=analysis_dir,
-            test_end=True,
-        )
-
-        # test result reading
-        self.result_reading_test(
-            None,
-            base_name,
-            analysis_dir=analysis_dir,
-            fea=fea,
-            res_obj_name=res_obj_name,
-        )
-
     # ********************************************************************************************
     def input_file_writing_test(
         self,
@@ -434,86 +378,6 @@ def create_test_results():
     shutil.copyfile(dat_result_file, dat_frequency_test_result_file)
     print("Results copied to the appropriate FEM test dirs in: " + temp_dir)
 
-    # ****************************************************************************
-    # thermomech
-    print("create thermomech result files")
-    unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-        test_class + ".test_thermomech_spine_analysis")
-    )
-    thermomech_analysis_dir = join(temp_dir, "FEM_ccx_thermomech")
-    doc_thermomech = FreeCAD.open(join(thermomech_analysis_dir, "spine_thermomech.FCStd"))
-    FemGui.setActiveAnalysis(doc_thermomech.Analysis)
-    fea = ccxtools.FemToolsCcx()
-    fea.reset_all()
-    fea.run()
-    fea.load_results()
-    stats_thermomech = []
-    res_obj_thermo = doc_thermomech.getObject("CCX_Results001")  # two time step results after run
-    for s in stat_types:
-        statval = resulttools.get_stats(res_obj_thermo, s)
-        stats_thermomech.append(
-            "{0}: ({1:.14g}, {2:.14g})\n"
-            .format(s, statval[0], statval[1])
-        )
-    thermomech_expected_values_file = join(
-        thermomech_analysis_dir,
-        "spine_thermomech_expected_values"
-    )
-    f = open(thermomech_expected_values_file, "w")
-    for s in stats_thermomech:
-        f.write(s)
-    f.close()
-    frd_result_file = os.path.splitext(fea.inp_file_name)[0] + ".frd"
-    dat_result_file = os.path.splitext(fea.inp_file_name)[0] + ".dat"
-    frd_thermomech_test_result_file = join(thermomech_analysis_dir, "spine_thermomech.frd")
-    dat_thermomech_test_result_file = join(thermomech_analysis_dir, "spine_thermomech.dat")
-    shutil.copyfile(frd_result_file, frd_thermomech_test_result_file)
-    shutil.copyfile(dat_result_file, dat_thermomech_test_result_file)
-    print("Results copied to the appropriate FEM test dirs in: " + temp_dir)
-
-    # ****************************************************************************
-    # Flow1D
-    print("create Flow1D result files")
-    unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-        test_class + ".test_thermomech_flow1D_analysis")
-    )
-    Flow1D_thermomech_analysis_dir = join(temp_dir, "FEM_ccx_Flow1D_thermomech")
-    doc_flow1d = FreeCAD.open(join(Flow1D_thermomech_analysis_dir, "Flow1D_thermomech.FCStd"))
-    FemGui.setActiveAnalysis(doc_flow1d.Analysis)
-    fea = ccxtools.FemToolsCcx()
-    fea.reset_all()
-    fea.run()
-    fea.load_results()
-    stats_flow1D = []
-    res_obj_flow1d = doc_flow1d.getObject("CCX_Time1_0_Results001")
-    for s in stat_types:
-        statval = resulttools.get_stats(res_obj_flow1d, s)
-        stats_flow1D.append(
-            "{0}: ({1:.14g}, {2:.14g})\n"
-            .format(s, statval[0], statval[1])
-        )
-    Flow1D_thermomech_expected_values_file = join(
-        Flow1D_thermomech_analysis_dir,
-        "Flow1D_thermomech_expected_values"
-    )
-    f = open(Flow1D_thermomech_expected_values_file, "w")
-    for s in stats_flow1D:
-        f.write(s)
-    f.close()
-    frd_result_file = os.path.splitext(fea.inp_file_name)[0] + ".frd"
-    dat_result_file = os.path.splitext(fea.inp_file_name)[0] + ".dat"
-    frd_Flow1D_thermomech_test_result_file = join(
-        Flow1D_thermomech_analysis_dir,
-        "Flow1D_thermomech.frd"
-    )
-    dat_Flow1D_thermomech_test_result_file = join(
-        Flow1D_thermomech_analysis_dir,
-        "Flow1D_thermomech.dat"
-    )
-    shutil.copyfile(frd_result_file, frd_Flow1D_thermomech_test_result_file)
-    shutil.copyfile(dat_result_file, dat_Flow1D_thermomech_test_result_file)
-    print("Flow1D thermomech results copied to the appropriate FEM test dirs in: " + temp_dir)
-
 
 """
 update the results of FEM ccxtools unit tests:
diff --git a/src/Mod/Fem/femtest/app/test_result.py b/src/Mod/Fem/femtest/app/test_result.py
index 0f31295a95..988e221155 100644
--- a/src/Mod/Fem/femtest/app/test_result.py
+++ b/src/Mod/Fem/femtest/app/test_result.py
@@ -65,227 +65,6 @@ class TestResult(unittest.TestCase):
             64 * "*"
         ))
 
-    # ********************************************************************************************
-    def test_read_frd_massflow_networkpressure(
-        self
-    ):
-        # read data from frd file
-        frd_file = join(
-            testtools.get_fem_test_home_dir(),
-            "calculix",
-            "thermomech_flow1D.frd"
-        )
-        from feminout.importCcxFrdResults import read_frd_result as read_frd
-        frd_content = read_frd(frd_file)
-
-        # do something with the read data
-        frd_content_len = []
-        for key in sorted(frd_content.keys()):
-            frd_content_len.append(len(frd_content[key]))
-        # print("read data")
-        # print(frd_content_len)
-        # print(sorted(frd_content.keys()))
-        # # print(frd_content)
-        read_mflow = frd_content["Results"][12]["mflow"]
-        read_npressure = frd_content["Results"][12]["npressure"]
-        res_len = [
-            len(read_mflow),
-            len(read_npressure)
-        ]
-        # print(res_len)
-        # print(read_mflow)
-        # print(read_npressure)
-
-        # create the expected data
-        # print("\nexpected data")
-        efc = {}  # expected frd content
-        efc["Nodes"] = {
-            2: FreeCAD.Vector(0.0, 0.0, -50.0),
-            3: FreeCAD.Vector(0.0, 0.0, -4300.0),
-            4: FreeCAD.Vector(4950.0, 0.0, -4300.0),
-            5: FreeCAD.Vector(5000.0, 0.0, -4300.0),
-            6: FreeCAD.Vector(8535.53, 0.0, -7835.53),
-            7: FreeCAD.Vector(8569.88, 0.0, -7870.88),
-            8: FreeCAD.Vector(12105.4, 0.0, -11406.4),
-            9: FreeCAD.Vector(12140.8, 0.0, -11441.8),
-            10: FreeCAD.Vector(13908.5, 0.0, -13209.5),
-            11: FreeCAD.Vector(13943.9, 0.0, -13244.9),
-            12: FreeCAD.Vector(15047.0, 0.0, -14348.0),
-            13: FreeCAD.Vector(15047.0, 0.0, -7947.97),
-            15: FreeCAD.Vector(0.0, 0.0, 0.0),
-            16: FreeCAD.Vector(0.0, 0.0, -2175.0),
-            17: FreeCAD.Vector(2475.0, 0.0, -4300.0),
-            18: FreeCAD.Vector(4975.0, 0.0, -4300.0),
-            19: FreeCAD.Vector(6767.77, 0.0, -6067.77),
-            20: FreeCAD.Vector(8552.71, 0.0, -7853.21),
-            21: FreeCAD.Vector(10337.6, 0.0, -9638.64),
-            22: FreeCAD.Vector(12123.1, 0.0, -11424.1),
-            23: FreeCAD.Vector(13024.6, 0.0, -12325.6),
-            24: FreeCAD.Vector(13926.2, 0.0, -13227.2),
-            25: FreeCAD.Vector(14495.4, 0.0, -13796.4),
-            26: FreeCAD.Vector(15047.0, 0.0, -11148.0),
-            27: FreeCAD.Vector(15047.0, 0.0, -7897.97)
-        }
-        efc["Seg2Elem"] = {
-            1: (15, 2),
-            13: (13, 27)
-        }
-        efc["Seg3Elem"] = {}
-        """   deleted during reading because of the inout file
-        efc["Seg3Elem"] = {
-            2: (2, 16, 3),
-            3: (3, 17, 4),
-            4: (4, 18, 5),
-            5: (5, 19, 6),
-            6: (6, 20, 7),
-            7: (7, 21, 8),
-            8: (8, 22, 9),
-            9: (9, 23, 10),
-            10: (10, 24, 11),
-            11: (11, 25, 12),
-            12: (12, 26, 13)
-        }
-        """
-        # faces
-        efc["Tria3Elem"] = efc["Tria6Elem"] = {}
-        efc["Quad4Elem"] = efc["Quad8Elem"] = {}
-        # volumes
-        efc["Tetra4Elem"] = efc["Tetra10Elem"] = {}
-        efc["Hexa8Elem"] = efc["Hexa20Elem"] = {}
-        efc["Penta6Elem"] = efc["Penta15Elem"] = {}
-
-        efc["Results"] = [
-            {"time": 0.00390625},
-            {"time": 0.0078125},
-            {"time": 0.0136719},
-            {"time": 0.0224609},
-            {"time": 0.0356445},
-            {"time": 0.0554199},
-            {"time": 0.085083},
-            {"time": 0.129578},
-            {"time": 0.19632},
-            {"time": 0.296432},
-            {"time": 0.446602},
-            {"time": 0.671856},
-            {
-                "number": 0,
-                "time": 1.0,
-                "mflow": {
-                    1: 78.3918,  # added during reading because of the inout file
-                    2: 78.3918,
-                    3: 78.3918,
-                    4: 78.3918,
-                    5: 78.3918,
-                    6: 78.3918,
-                    7: 78.3918,
-                    8: 78.3918,
-                    9: 78.3918,
-                    10: 78.3918,
-                    11: 78.3918,
-                    12: 78.3918,
-                    13: 78.3918,
-                    15: 78.3918,
-                    16: 78.3918,
-                    17: 78.3918,
-                    18: 78.3918,
-                    19: 78.3918,
-                    20: 78.3918,
-                    21: 78.3918,
-                    22: 78.3918,
-                    23: 78.3918,
-                    24: 78.3918,
-                    25: 78.3918,
-                    26: 78.3918,
-                    27: 78.3918,
-                    28: 78.3918  # added during reading because of the inout file
-                },
-                "npressure": {
-                    1: 0.1,  # added during reading because of the inout file
-                    2: 0.1,
-                    3: 0.134840,
-                    4: 0.128261,
-                    5: 0.127949,
-                    6: 0.155918,
-                    7: 0.157797,
-                    8: 0.191647,
-                    9: 0.178953,
-                    10: 0.180849,
-                    11: 0.161476,
-                    12: 0.162658,
-                    13: 0.1,
-                    15: 0.1,
-                    16: 0.117420,
-                    17: 0.131551,
-                    18: 0.128105,
-                    19: 0.141934,
-                    20: 0.156857,
-                    21: 0.174722,
-                    22: 0.185300,
-                    23: 0.179901,
-                    24: 0.171162,
-                    25: 0.162067,
-                    26: 0.131329,
-                    27: 0.1,
-                    28: 0.1  # added during reading because of the inout file
-                }
-            }
-        ]
-        expected_frd_content = efc
-
-        # do something with the expected data
-        expected_frd_content_len = []
-        for key in sorted(expected_frd_content.keys()):
-            expected_frd_content_len.append(len(expected_frd_content[key]))
-        # print(expected_frd_content_len)
-        # print(sorted(expected_frd_content.keys()))
-        # expected results
-        expected_mflow = expected_frd_content["Results"][12]["mflow"]
-        expected_npressure = expected_frd_content["Results"][12]["npressure"]
-        expected_res_len = [
-            len(expected_mflow),
-            len(expected_npressure)
-        ]
-        # print(expected_res_len)
-        # print(expected_mflow)
-        # print(expected_npressure)
-
-        # tests
-        self.assertEqual(
-            frd_content_len,
-            expected_frd_content_len,
-            "Length's of read frd data values are unexpected"
-        )
-        self.assertEqual(
-            frd_content["Nodes"],
-            expected_frd_content["Nodes"],
-            "Values of read node data are unexpected"
-        )
-        self.assertEqual(
-            frd_content["Seg2Elem"],
-            expected_frd_content["Seg2Elem"],
-            "Values of read Seg2 data are unexpected"
-        )
-        self.assertEqual(
-            frd_content["Seg3Elem"],
-            expected_frd_content["Seg3Elem"],
-            "Values of read Seg3 data are unexpected"
-        )
-        self.assertEqual(
-            res_len,
-            expected_res_len,
-            "Length's of read result data values are unexpected"
-        )
-        self.assertEqual(
-            read_mflow,
-            expected_mflow,
-            "Values of read mflow result data are unexpected"
-        )
-        self.assertEqual(
-            read_npressure,
-            expected_npressure,
-            "Values of read npressure result data are unexpected"
-        )
-
     # ********************************************************************************************
     def get_stress_values(
         self
diff --git a/src/Mod/Fem/femtest/app/test_solver_calculix.py b/src/Mod/Fem/femtest/app/test_solver_calculix.py
index d0e2270f8e..184ad52d65 100644
--- a/src/Mod/Fem/femtest/app/test_solver_calculix.py
+++ b/src/Mod/Fem/femtest/app/test_solver_calculix.py
@@ -341,22 +341,6 @@ class TestSolverCalculix(unittest.TestCase):
         setup(self.document, "calculix")
         self.input_file_writing_test(get_namefromdef("test_"))
 
-    # ********************************************************************************************
-    def test_thermomech_flow1D(
-        self
-    ):
-        from femexamples.thermomech_flow1d import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
-    # ********************************************************************************************
-    def test_thermomech_spine(
-        self
-    ):
-        from femexamples.thermomech_spine import setup
-        setup(self.document, "calculix")
-        self.input_file_writing_test(get_namefromdef("test_"))
-
     # ********************************************************************************************
     def input_file_writing_test(
         self,
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd
deleted file mode 100644
index 94483713a2..0000000000
Binary files a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.FCStd and /dev/null differ
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.dat
deleted file mode 100644
index e69de29bb2..0000000000
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd
deleted file mode 100644
index d3592c6810..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.frd
+++ /dev/null
@@ -1,847 +0,0 @@
-    1C
-    1UUSER                                                              
-    1UDATE              07.february.2018                                
-    1UTIME              13:19:13                                        
-    1UHOST                                                              
-    1UPGM               CalculiX                                        
-    1UVERSION           Version 2.11                             
-    1UCOMPILETIME       So 31. Jul 13:26:31 CEST 2016                    
-    1UDIR                                                               
-    1UDBN                                                               
-    1UMAT    1FLUIDMATERIAL                                             
-    2C                            25                                     1
- -1         2 0.00000E+00 0.00000E+00-5.00000E+01
- -1         3 0.00000E+00 0.00000E+00-4.30000E+03
- -1         4 4.95000E+03 0.00000E+00-4.30000E+03
- -1         5 5.00000E+03 0.00000E+00-4.30000E+03
- -1         6 8.53553E+03 0.00000E+00-7.83553E+03
- -1         7 8.56988E+03 0.00000E+00-7.87088E+03
- -1         8 1.21054E+04 0.00000E+00-1.14064E+04
- -1         9 1.21408E+04 0.00000E+00-1.14418E+04
- -1        10 1.39085E+04 0.00000E+00-1.32095E+04
- -1        11 1.39439E+04 0.00000E+00-1.32449E+04
- -1        12 1.50470E+04 0.00000E+00-1.43480E+04
- -1        13 1.50470E+04 0.00000E+00-7.94797E+03
- -1        15 0.00000E+00 0.00000E+00 0.00000E+00
- -1        16 0.00000E+00 0.00000E+00-2.17500E+03
- -1        17 2.47500E+03 0.00000E+00-4.30000E+03
- -1        18 4.97500E+03 0.00000E+00-4.30000E+03
- -1        19 6.76777E+03 0.00000E+00-6.06777E+03
- -1        20 8.55271E+03 0.00000E+00-7.85321E+03
- -1        21 1.03376E+04 0.00000E+00-9.63864E+03
- -1        22 1.21231E+04 0.00000E+00-1.14241E+04
- -1        23 1.30246E+04 0.00000E+00-1.23256E+04
- -1        24 1.39262E+04 0.00000E+00-1.32272E+04
- -1        25 1.44954E+04 0.00000E+00-1.37964E+04
- -1        26 1.50470E+04 0.00000E+00-1.11480E+04
- -1        27 1.50470E+04 0.00000E+00-7.89797E+03
- -3
-    3C                            13                                     1
- -1         1   11    0    1
- -2        15         2
- -1         2   12    0    1
- -2         2         3        16
- -1         3   12    0    1
- -2         3         4        17
- -1         4   12    0    1
- -2         4         5        18
- -1         5   12    0    1
- -2         5         6        19
- -1         6   12    0    1
- -2         6         7        20
- -1         7   12    0    1
- -2         7         8        21
- -1         8   12    0    1
- -2         8         9        22
- -1         9   12    0    1
- -2         9        10        23
- -1        10   12    0    1
- -2        10        11        24
- -1        11   12    0    1
- -2        11        12        25
- -1        12   12    0    1
- -2        12        13        26
- -1        13   11    0    1
- -2        13        27
- -3
-    1PSTEP                         1           1           1          
-  100CL  101 3.90625E-03          25                     0    1           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 6.94717E-03
- -1         3 6.94717E-03
- -1         4 6.94717E-03
- -1         5 6.94717E-03
- -1         6 6.94717E-03
- -1         7 6.94717E-03
- -1         8 6.94717E-03
- -1         9 6.94717E-03
- -1        10 6.94717E-03
- -1        11 6.94717E-03
- -1        12 6.94717E-03
- -1        13 6.94717E-03
- -1        15 6.94717E-03
- -1        16 6.94717E-03
- -1        17 6.94717E-03
- -1        18 6.94717E-03
- -1        19 6.94717E-03
- -1        20 6.94717E-03
- -1        21 6.94717E-03
- -1        22 6.94717E-03
- -1        23 6.94717E-03
- -1        24 6.94717E-03
- -1        25 6.94717E-03
- -1        26 6.94717E-03
- -1        27 6.94717E-03
- -3
-    1PSTEP                         2           1           1          
-  100CL  101 3.90625E-03          25                     0    1           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 3.90625E-04
- -1         3 4.99998E-04
- -1         4 4.99796E-04
- -1         5 4.97346E-04
- -1         6 6.32354E-04
- -1         7 6.45744E-04
- -1         8 7.80932E-04
- -1         9 6.79877E-04
- -1        10 7.47010E-04
- -1        11 5.93493E-04
- -1        12 6.35385E-04
- -1        13 3.90625E-04
- -1        15 3.90625E-04
- -1        16 4.45311E-04
- -1        17 4.99897E-04
- -1        18 4.98571E-04
- -1        19 5.64850E-04
- -1        20 6.39049E-04
- -1        21 7.13338E-04
- -1        22 7.30404E-04
- -1        23 7.13443E-04
- -1        24 6.70252E-04
- -1        25 6.14439E-04
- -1        26 5.13005E-04
- -1        27 3.90625E-04
- -3
-    1PSTEP                         3           2           1          
-  100CL  102 7.81250E-03          25                     0    2           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 9.80537E-03
- -1         3 9.80537E-03
- -1         4 9.80537E-03
- -1         5 9.80537E-03
- -1         6 9.80537E-03
- -1         7 9.80537E-03
- -1         8 9.80537E-03
- -1         9 9.80537E-03
- -1        10 9.80537E-03
- -1        11 9.80537E-03
- -1        12 9.80537E-03
- -1        13 9.80537E-03
- -1        15 9.80537E-03
- -1        16 9.80537E-03
- -1        17 9.80537E-03
- -1        18 9.80537E-03
- -1        19 9.80537E-03
- -1        20 9.80537E-03
- -1        21 9.80537E-03
- -1        22 9.80537E-03
- -1        23 9.80537E-03
- -1        24 9.80537E-03
- -1        25 9.80537E-03
- -1        26 9.80537E-03
- -1        27 9.80537E-03
- -3
-    1PSTEP                         4           2           1          
-  100CL  102 7.81250E-03          25                     0    2           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 7.81250E-04
- -1         3 1.00042E-03
- -1         4 9.99611E-04
- -1         5 9.94731E-04
- -1         6 1.26434E-03
- -1         7 1.29103E-03
- -1         8 1.56136E-03
- -1         9 1.36005E-03
- -1        10 1.49338E-03
- -1        11 1.18757E-03
- -1        12 1.27077E-03
- -1        13 7.81250E-04
- -1        15 7.81250E-04
- -1        16 8.90833E-04
- -1        17 1.00001E-03
- -1        18 9.97171E-04
- -1        19 1.12954E-03
- -1        20 1.27768E-03
- -1        21 1.42619E-03
- -1        22 1.46071E-03
- -1        23 1.42672E-03
- -1        24 1.34048E-03
- -1        25 1.22917E-03
- -1        26 1.02601E-03
- -1        27 7.81250E-04
- -3
-    1PSTEP                         5           3           1          
-  100CL  103 1.36719E-02          25                     0    3           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 1.29331E-02
- -1         3 1.29331E-02
- -1         4 1.29331E-02
- -1         5 1.29331E-02
- -1         6 1.29331E-02
- -1         7 1.29331E-02
- -1         8 1.29331E-02
- -1         9 1.29331E-02
- -1        10 1.29331E-02
- -1        11 1.29331E-02
- -1        12 1.29331E-02
- -1        13 1.29331E-02
- -1        15 1.29331E-02
- -1        16 1.29331E-02
- -1        17 1.29331E-02
- -1        18 1.29331E-02
- -1        19 1.29331E-02
- -1        20 1.29331E-02
- -1        21 1.29331E-02
- -1        22 1.29331E-02
- -1        23 1.29331E-02
- -1        24 1.29331E-02
- -1        25 1.29331E-02
- -1        26 1.29331E-02
- -1        27 1.29331E-02
- -3
-    1PSTEP                         6           3           1          
-  100CL  103 1.36719E-02          25                     0    3           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 1.36719E-03
- -1         3 1.75182E-03
- -1         4 1.74937E-03
- -1         5 1.74088E-03
- -1         6 2.21165E-03
- -1         7 2.25810E-03
- -1         8 2.73105E-03
- -1         9 2.38088E-03
- -1        10 2.61176E-03
- -1        11 2.07977E-03
- -1        12 2.22385E-03
- -1        13 1.36719E-03
- -1        15 1.36719E-03
- -1        16 1.55950E-03
- -1        17 1.75059E-03
- -1        18 1.74512E-03
- -1        19 1.97626E-03
- -1        20 2.23487E-03
- -1        21 2.49458E-03
- -1        22 2.55597E-03
- -1        23 2.49632E-03
- -1        24 2.34577E-03
- -1        25 2.15181E-03
- -1        26 1.79552E-03
- -1        27 1.36719E-03
- -3
-    1PSTEP                         7           4           1          
-  100CL  104 2.24609E-02          25                     0    4           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 1.65041E-02
- -1         3 1.65041E-02
- -1         4 1.65041E-02
- -1         5 1.65041E-02
- -1         6 1.65041E-02
- -1         7 1.65041E-02
- -1         8 1.65041E-02
- -1         9 1.65041E-02
- -1        10 1.65041E-02
- -1        11 1.65041E-02
- -1        12 1.65041E-02
- -1        13 1.65041E-02
- -1        15 1.65041E-02
- -1        16 1.65041E-02
- -1        17 1.65041E-02
- -1        18 1.65041E-02
- -1        19 1.65041E-02
- -1        20 1.65041E-02
- -1        21 1.65041E-02
- -1        22 1.65041E-02
- -1        23 1.65041E-02
- -1        24 1.65041E-02
- -1        25 1.65041E-02
- -1        26 1.65041E-02
- -1        27 1.65041E-02
- -3
-    1PSTEP                         8           4           1          
-  100CL  104 2.24609E-02          25                     0    4           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 2.24609E-03
- -1         3 2.88064E-03
- -1         4 2.87409E-03
- -1         5 2.86026E-03
- -1         6 3.63111E-03
- -1         7 3.70682E-03
- -1         8 4.48353E-03
- -1         9 3.91334E-03
- -1        10 4.28673E-03
- -1        11 3.42046E-03
- -1        12 3.65346E-03
- -1        13 2.24609E-03
- -1        15 2.24609E-03
- -1        16 2.56336E-03
- -1        17 2.87736E-03
- -1        18 2.86717E-03
- -1        19 3.24568E-03
- -1        20 3.66897E-03
- -1        21 4.09518E-03
- -1        22 4.19843E-03
- -1        23 4.10004E-03
- -1        24 3.85360E-03
- -1        25 3.53696E-03
- -1        26 2.94978E-03
- -1        27 2.24609E-03
- -3
-    1PSTEP                         9           5           1          
-  100CL  105 3.56445E-02          25                     0    5           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 2.06558E-02
- -1         3 2.06558E-02
- -1         4 2.06558E-02
- -1         5 2.06558E-02
- -1         6 2.06558E-02
- -1         7 2.06558E-02
- -1         8 2.06558E-02
- -1         9 2.06558E-02
- -1        10 2.06558E-02
- -1        11 2.06558E-02
- -1        12 2.06558E-02
- -1        13 2.06558E-02
- -1        15 2.06558E-02
- -1        16 2.06558E-02
- -1        17 2.06558E-02
- -1        18 2.06558E-02
- -1        19 2.06558E-02
- -1        20 2.06558E-02
- -1        21 2.06558E-02
- -1        22 2.06558E-02
- -1        23 2.06558E-02
- -1        24 2.06558E-02
- -1        25 2.06558E-02
- -1        26 2.06558E-02
- -1        27 2.06558E-02
- -3
-    1PSTEP                        10           5           1          
-  100CL  105 3.56445E-02          25                     0    5           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 3.56445E-03
- -1         3 4.57761E-03
- -1         4 4.56133E-03
- -1         5 4.53967E-03
- -1         6 5.75703E-03
- -1         7 5.87579E-03
- -1         8 7.10770E-03
- -1         9 6.21472E-03
- -1        10 6.79349E-03
- -1        11 5.43673E-03
- -1        12 5.79788E-03
- -1        13 3.56445E-03
- -1        15 3.56445E-03
- -1        16 4.07103E-03
- -1        17 4.56947E-03
- -1        18 4.55050E-03
- -1        19 5.14835E-03
- -1        20 5.81641E-03
- -1        21 6.49175E-03
- -1        22 6.66121E-03
- -1        23 6.50411E-03
- -1        24 6.11511E-03
- -1        25 5.61731E-03
- -1        26 4.68117E-03
- -1        27 3.56445E-03
- -3
-    1PSTEP                        11           6           1          
-  100CL  106 5.54199E-02          25                     0    6           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 2.55093E-02
- -1         3 2.55093E-02
- -1         4 2.55093E-02
- -1         5 2.55093E-02
- -1         6 2.55093E-02
- -1         7 2.55093E-02
- -1         8 2.55093E-02
- -1         9 2.55093E-02
- -1        10 2.55093E-02
- -1        11 2.55093E-02
- -1        12 2.55093E-02
- -1        13 2.55093E-02
- -1        15 2.55093E-02
- -1        16 2.55093E-02
- -1        17 2.55093E-02
- -1        18 2.55093E-02
- -1        19 2.55093E-02
- -1        20 2.55093E-02
- -1        21 2.55093E-02
- -1        22 2.55093E-02
- -1        23 2.55093E-02
- -1        24 2.55093E-02
- -1        25 2.55093E-02
- -1        26 2.55093E-02
- -1        27 2.55093E-02
- -3
-    1PSTEP                        12           6           1          
-  100CL  106 5.54199E-02          25                     0    6           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 5.54199E-03
- -1         3 7.13118E-03
- -1         4 7.09257E-03
- -1         5 7.05954E-03
- -1         6 8.93886E-03
- -1         7 9.12034E-03
- -1         8 1.10342E-02
- -1         9 9.67261E-03
- -1        10 1.05413E-02
- -1        11 8.47244E-03
- -1        12 9.01452E-03
- -1        13 5.54199E-03
- -1        15 5.54199E-03
- -1        16 6.33659E-03
- -1        17 7.11188E-03
- -1        18 7.07606E-03
- -1        19 7.99920E-03
- -1        20 9.02960E-03
- -1        21 1.00773E-02
- -1        22 1.03534E-02
- -1        23 1.01070E-02
- -1        24 9.50688E-03
- -1        25 8.74348E-03
- -1        26 7.27825E-03
- -1        27 5.54199E-03
- -3
-    1PSTEP                        13           7           1          
-  100CL  107 8.50830E-02          25                     0    7           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 3.11648E-02
- -1         3 3.11648E-02
- -1         4 3.11648E-02
- -1         5 3.11648E-02
- -1         6 3.11648E-02
- -1         7 3.11648E-02
- -1         8 3.11648E-02
- -1         9 3.11648E-02
- -1        10 3.11648E-02
- -1        11 3.11648E-02
- -1        12 3.11648E-02
- -1        13 3.11648E-02
- -1        15 3.11648E-02
- -1        16 3.11648E-02
- -1        17 3.11648E-02
- -1        18 3.11648E-02
- -1        19 3.11648E-02
- -1        20 3.11648E-02
- -1        21 3.11648E-02
- -1        22 3.11648E-02
- -1        23 3.11648E-02
- -1        24 3.11648E-02
- -1        25 3.11648E-02
- -1        26 3.11648E-02
- -1        27 3.11648E-02
- -3
-    1PSTEP                        14           7           1          
-  100CL  107 8.50830E-02          25                     0    7           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 8.50830E-03
- -1         3 1.09787E-02
- -1         4 1.08902E-02
- -1         5 1.08409E-02
- -1         6 1.36966E-02
- -1         7 1.39683E-02
- -1         8 1.69031E-02
- -1         9 1.48717E-02
- -1        10 1.61370E-02
- -1        11 1.30499E-02
- -1        12 1.38395E-02
- -1        13 8.50830E-03
- -1        15 8.50830E-03
- -1        16 9.74349E-03
- -1        17 1.09345E-02
- -1        18 1.08656E-02
- -1        19 1.22688E-02
- -1        20 1.38325E-02
- -1        21 1.54357E-02
- -1        22 1.58874E-02
- -1        23 1.55044E-02
- -1        24 1.45935E-02
- -1        25 1.34447E-02
- -1        26 1.11739E-02
- -1        27 8.50830E-03
- -3
-    1PSTEP                        15           8           1          
-  100CL  108 1.29578E-01          25                     0    8           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 3.76821E-02
- -1         3 3.76821E-02
- -1         4 3.76821E-02
- -1         5 3.76821E-02
- -1         6 3.76821E-02
- -1         7 3.76821E-02
- -1         8 3.76821E-02
- -1         9 3.76821E-02
- -1        10 3.76821E-02
- -1        11 3.76821E-02
- -1        12 3.76821E-02
- -1        13 3.76821E-02
- -1        15 3.76821E-02
- -1        16 3.76821E-02
- -1        17 3.76821E-02
- -1        18 3.76821E-02
- -1        19 3.76821E-02
- -1        20 3.76821E-02
- -1        21 3.76821E-02
- -1        22 3.76821E-02
- -1        23 3.76821E-02
- -1        24 3.76821E-02
- -1        25 3.76821E-02
- -1        26 3.76821E-02
- -1        27 3.76821E-02
- -3
-    1PSTEP                        16           8           1          
-  100CL  108 1.29578E-01          25                     0    8           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 1.29578E-02
- -1         3 1.67853E-02
- -1         4 1.65883E-02
- -1         5 1.65162E-02
- -1         6 2.08025E-02
- -1         7 2.12015E-02
- -1         8 2.56638E-02
- -1         9 2.26958E-02
- -1        10 2.44770E-02
- -1        11 1.99654E-02
- -1        12 2.10769E-02
- -1        13 1.29578E-02
- -1        15 1.29578E-02
- -1        16 1.48715E-02
- -1        17 1.66868E-02
- -1        18 1.65523E-02
- -1        19 1.86594E-02
- -1        20 2.10020E-02
- -1        21 2.34327E-02
- -1        22 2.41798E-02
- -1        23 2.35864E-02
- -1        24 2.22212E-02
- -1        25 2.05212E-02
- -1        26 1.70173E-02
- -1        27 1.29578E-02
- -3
-    1PSTEP                        17           9           1          
-  100CL  109 1.96320E-01          25                     0    9           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 4.50493E-02
- -1         3 4.50493E-02
- -1         4 4.50493E-02
- -1         5 4.50493E-02
- -1         6 4.50493E-02
- -1         7 4.50493E-02
- -1         8 4.50493E-02
- -1         9 4.50493E-02
- -1        10 4.50493E-02
- -1        11 4.50493E-02
- -1        12 4.50493E-02
- -1        13 4.50493E-02
- -1        15 4.50493E-02
- -1        16 4.50493E-02
- -1        17 4.50493E-02
- -1        18 4.50493E-02
- -1        19 4.50493E-02
- -1        20 4.50493E-02
- -1        21 4.50493E-02
- -1        22 4.50493E-02
- -1        23 4.50493E-02
- -1        24 4.50493E-02
- -1        25 4.50493E-02
- -1        26 4.50493E-02
- -1        27 4.50493E-02
- -3
-    1PSTEP                        18           9           1          
-  100CL  109 1.96320E-01          25                     0    9           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 1.96320E-02
- -1         3 2.55652E-02
- -1         4 2.51386E-02
- -1         5 2.50356E-02
- -1         6 3.14002E-02
- -1         7 3.19744E-02
- -1         8 3.87202E-02
- -1         9 3.44820E-02
- -1        10 3.68805E-02
- -1        11 3.04363E-02
- -1        12 3.19330E-02
- -1        13 1.96320E-02
- -1        15 1.96320E-02
- -1        16 2.25986E-02
- -1        17 2.53519E-02
- -1        18 2.50871E-02
- -1        19 2.82179E-02
- -1        20 3.16873E-02
- -1        21 3.53473E-02
- -1        22 3.66011E-02
- -1        23 3.56813E-02
- -1        24 3.36584E-02
- -1        25 3.11847E-02
- -1        26 2.57825E-02
- -1        27 1.96320E-02
- -3
-    1PSTEP                        19          10           1          
-  100CL  110 2.96432E-01          25                     0   10           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 5.31446E-02
- -1         3 5.31446E-02
- -1         4 5.31446E-02
- -1         5 5.31446E-02
- -1         6 5.31446E-02
- -1         7 5.31446E-02
- -1         8 5.31446E-02
- -1         9 5.31446E-02
- -1        10 5.31446E-02
- -1        11 5.31446E-02
- -1        12 5.31446E-02
- -1        13 5.31446E-02
- -1        15 5.31446E-02
- -1        16 5.31446E-02
- -1        17 5.31446E-02
- -1        18 5.31446E-02
- -1        19 5.31446E-02
- -1        20 5.31446E-02
- -1        21 5.31446E-02
- -1        22 5.31446E-02
- -1        23 5.31446E-02
- -1        24 5.31446E-02
- -1        25 5.31446E-02
- -1        26 5.31446E-02
- -1        27 5.31446E-02
- -3
-    1PSTEP                        20          10           1          
-  100CL  110 2.96432E-01          25                     0   10           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 2.96432E-02
- -1         3 3.88665E-02
- -1         4 3.79702E-02
- -1         5 3.78268E-02
- -1         6 4.71822E-02
- -1         7 4.79893E-02
- -1         8 5.81459E-02
- -1         9 5.22556E-02
- -1        10 5.52863E-02
- -1        11 4.63261E-02
- -1        12 4.82172E-02
- -1        13 2.96432E-02
- -1        15 2.96432E-02
- -1        16 3.42549E-02
- -1        17 3.84183E-02
- -1        18 3.78985E-02
- -1        19 4.25045E-02
- -1        20 4.75857E-02
- -1        21 5.30676E-02
- -1        22 5.52008E-02
- -1        23 5.37710E-02
- -1        24 5.08062E-02
- -1        25 4.72717E-02
- -1        26 3.89302E-02
- -1        27 2.96432E-02
- -3
-    1PSTEP                        21          11           1          
-  100CL  111 4.46602E-01          25                     0   11           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 6.17072E-02
- -1         3 6.17072E-02
- -1         4 6.17072E-02
- -1         5 6.17072E-02
- -1         6 6.17072E-02
- -1         7 6.17072E-02
- -1         8 6.17072E-02
- -1         9 6.17072E-02
- -1        10 6.17072E-02
- -1        11 6.17072E-02
- -1        12 6.17072E-02
- -1        13 6.17072E-02
- -1        15 6.17072E-02
- -1        16 6.17072E-02
- -1        17 6.17072E-02
- -1        18 6.17072E-02
- -1        19 6.17072E-02
- -1        20 6.17072E-02
- -1        21 6.17072E-02
- -1        22 6.17072E-02
- -1        23 6.17072E-02
- -1        24 6.17072E-02
- -1        25 6.17072E-02
- -1        26 6.17072E-02
- -1        27 6.17072E-02
- -3
-    1PSTEP                        22          11           1          
-  100CL  111 4.46602E-01          25                     0   11           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 4.46602E-02
- -1         3 5.90485E-02
- -1         4 5.72280E-02
- -1         5 5.70347E-02
- -1         6 7.06545E-02
- -1         7 7.17589E-02
- -1         8 8.70061E-02
- -1         9 7.90811E-02
- -1        10 8.25456E-02
- -1        11 7.04817E-02
- -1        12 7.26436E-02
- -1        13 4.46602E-02
- -1        15 4.46602E-02
- -1        16 5.18544E-02
- -1        17 5.81383E-02
- -1        18 5.71314E-02
- -1        19 6.38446E-02
- -1        20 7.12067E-02
- -1        21 7.93825E-02
- -1        22 8.30436E-02
- -1        23 8.08134E-02
- -1        24 7.65137E-02
- -1        25 7.15626E-02
- -1        26 5.86519E-02
- -1        27 4.46602E-02
- -3
-    1PSTEP                        23          12           1          
-  100CL  112 6.71856E-01          25                     0   12           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 7.03423E-02
- -1         3 7.03423E-02
- -1         4 7.03423E-02
- -1         5 7.03423E-02
- -1         6 7.03423E-02
- -1         7 7.03423E-02
- -1         8 7.03423E-02
- -1         9 7.03423E-02
- -1        10 7.03423E-02
- -1        11 7.03423E-02
- -1        12 7.03423E-02
- -1        13 7.03423E-02
- -1        15 7.03423E-02
- -1        16 7.03423E-02
- -1        17 7.03423E-02
- -1        18 7.03423E-02
- -1        19 7.03423E-02
- -1        20 7.03423E-02
- -1        21 7.03423E-02
- -1        22 7.03423E-02
- -1        23 7.03423E-02
- -1        24 7.03423E-02
- -1        25 7.03423E-02
- -1        26 7.03423E-02
- -1        27 7.03423E-02
- -3
-    1PSTEP                        24          12           1          
-  100CL  112 6.71856E-01          25                     0   12           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 6.71856E-02
- -1         3 8.96906E-02
- -1         4 8.61317E-02
- -1         5 8.58805E-02
- -1         6 1.05541E-01
- -1         7 1.07008E-01
- -1         8 1.29850E-01
- -1         9 1.19584E-01
- -1        10 1.22875E-01
- -1        11 1.07230E-01
- -1        12 1.09283E-01
- -1        13 6.71856E-02
- -1        15 6.71856E-02
- -1        16 7.84381E-02
- -1        17 8.79111E-02
- -1        18 8.60061E-02
- -1        19 9.57109E-02
- -1        20 1.06275E-01
- -1        21 1.18429E-01
- -1        22 1.24717E-01
- -1        23 1.21229E-01
- -1        24 1.15052E-01
- -1        25 1.08256E-01
- -1        26 8.82343E-02
- -1        27 6.71856E-02
- -3
-    1PSTEP                        25          13           1          
-  100CL  113 1.000000000          25                     0   13           1
- -4  MAFLOW      1    1
- -5  MF          1    1    0    0
- -1         2 7.83918E-02
- -1         3 7.83918E-02
- -1         4 7.83918E-02
- -1         5 7.83918E-02
- -1         6 7.83918E-02
- -1         7 7.83918E-02
- -1         8 7.83918E-02
- -1         9 7.83918E-02
- -1        10 7.83918E-02
- -1        11 7.83918E-02
- -1        12 7.83918E-02
- -1        13 7.83918E-02
- -1        15 7.83918E-02
- -1        16 7.83918E-02
- -1        17 7.83918E-02
- -1        18 7.83918E-02
- -1        19 7.83918E-02
- -1        20 7.83918E-02
- -1        21 7.83918E-02
- -1        22 7.83918E-02
- -1        23 7.83918E-02
- -1        24 7.83918E-02
- -1        25 7.83918E-02
- -1        26 7.83918E-02
- -1        27 7.83918E-02
- -3
-    1PSTEP                        26          13           1          
-  100CL  113 1.000000000          25                     0   13           1
- -4  STPRES      1    1
- -5  PS          1    1    0    0
- -1         2 1.00000E-01
- -1         3 1.34840E-01
- -1         4 1.28261E-01
- -1         5 1.27949E-01
- -1         6 1.55918E-01
- -1         7 1.57797E-01
- -1         8 1.91647E-01
- -1         9 1.78953E-01
- -1        10 1.80849E-01
- -1        11 1.61476E-01
- -1        12 1.62658E-01
- -1        13 1.00000E-01
- -1        15 1.00000E-01
- -1        16 1.17420E-01
- -1        17 1.31551E-01
- -1        18 1.28105E-01
- -1        19 1.41934E-01
- -1        20 1.56857E-01
- -1        21 1.74722E-01
- -1        22 1.85300E-01
- -1        23 1.79901E-01
- -1        24 1.71162E-01
- -1        25 1.62067E-01
- -1        26 1.31329E-01
- -1        27 1.00000E-01
- -3
- 9999
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp
deleted file mode 100644
index 436321a863..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D.inp
+++ /dev/null
@@ -1,190 +0,0 @@
-** written by FreeCAD inp file writer for CalculiX,Abaqus meshes
-** highest dimension mesh elements only.
-
-** Nodes
-*Node, NSET=Nall
-1, 0, 0, 50
-2, 0, 0, -50
-3, 0, 0, -4300
-4, 4950, 0, -4300
-5, 5000, 0, -4300
-6, 8535.53, 0, -7835.53
-7, 8569.88, 0, -7870.88
-8, 12105.41, 0, -11406.41
-9, 12140.76, 0, -11441.76
-10, 13908.53, 0, -13209.53
-11, 13943.88, 0, -13244.88
-12, 15046.97, 0, -14347.97
-13, 15046.97, 0, -7947.97
-14, 15046.97, 0, -7847.97
-15, 0, 0, 0
-16, 0, 0, -2175
-17, 2475, 0, -4300
-18, 4975, 0, -4300
-19, 6767.765, 0, -6067.765
-20, 8552.705, 0, -7853.205
-21, 10337.645, 0, -9638.645
-22, 12123.085, 0, -11424.085
-23, 13024.645, 0, -12325.645
-24, 13926.205, 0, -13227.205
-25, 14495.425, 0, -13796.425
-26, 15046.97, 0, -11147.97
-27, 15046.97, 0, -7897.97
-28, 15046.97, 0, -7897.97
-
-
-** Edge elements
-*Element, TYPE=D, ELSET=Eedges
-1, 0, 15, 2
-2, 2, 16, 3
-3, 3, 17, 4
-4, 4, 18, 5
-5, 5, 19, 6
-6, 6, 20, 7
-7, 7, 21, 8
-8, 8, 22, 9
-9, 9, 23, 10
-10, 10, 24, 11
-11, 11, 25, 12
-12, 12, 26, 13
-13, 13, 27, 0
-
-** Define element set Eall
-*ELSET, ELSET=Eall
-Eedges
-
-
-
-***********************************************************
-** Element sets for materials and FEM element type (solid, shell, beam, fluid)
-*ELSET,ELSET=M0F0
-1,
-*ELSET,ELSET=M0F1
-2,
-*ELSET,ELSET=M0F2
-3,
-5,
-*ELSET,ELSET=M0F3
-4,
-*ELSET,ELSET=M0F4
-6,
-*ELSET,ELSET=M0F5
-7,
-*ELSET,ELSET=M0F6
-8,
-*ELSET,ELSET=M0F7
-9,
-11,
-*ELSET,ELSET=M0F8
-10,
-*ELSET,ELSET=M0F9
-12,
-*ELSET,ELSET=M0F10
-13,
-
-***********************************************************
-** Materials
-** see information about units at file end
-** FreeCAD material name: Water
-** FluidMaterial
-*MATERIAL, NAME=FluidMaterial
-*DENSITY
-9.98E-10
-*FLUID CONSTANTS
-4182000000,1.003E-09
-
-***********************************************************
-** Sections
-*FLUID SECTION, ELSET=M0F0, TYPE=PIPE INOUT, MATERIAL=FluidMaterial
-*FLUID SECTION, ELSET=M0F1, TYPE=PIPE ENTRANCE, MATERIAL=FluidMaterial
-31416,25133
-*FLUID SECTION, ELSET=M0F2, TYPE=PIPE MANNING, MATERIAL=FluidMaterial
-31416,50,0.002
-*FLUID SECTION, ELSET=M0F3, TYPE=PIPE BEND, MATERIAL=FluidMaterial
-31416,1.5,45,0.4
-*FLUID SECTION, ELSET=M0F4, TYPE=PIPE ENLARGEMENT, MATERIAL=FluidMaterial
-31416,70686
-*FLUID SECTION, ELSET=M0F5, TYPE=PIPE MANNING, MATERIAL=FluidMaterial
-70686,75,0.002
-*FLUID SECTION, ELSET=M0F6, TYPE=PIPE CONTRACTION, MATERIAL=FluidMaterial
-70686,17671
-*FLUID SECTION, ELSET=M0F7, TYPE=PIPE MANNING, MATERIAL=FluidMaterial
-17671,37.5,0.002
-*FLUID SECTION, ELSET=M0F8, TYPE=PIPE GATE VALVE, MATERIAL=FluidMaterial
-17671,0.5
-*FLUID SECTION, ELSET=M0F9, TYPE=PIPE ENLARGEMENT, MATERIAL=FluidMaterial
-17671,1000000000000
-*FLUID SECTION, ELSET=M0F10, TYPE=PIPE INOUT, MATERIAL=FluidMaterial
-
-***********************************************************
-** At least one step is needed to run an CalculiX analysis of FreeCAD
-*STEP, INC=2000
-*COUPLED TEMPERATURE-DISPLACEMENT, STEADY STATE
-1.0,1.0
-
-***********************************************************
-** Self weight Constraint
-** ConstraintSelfWeight
-*DLOAD
-Eall,GRAV,9806,0,0,-1
-
-
-***********************************************************
-** FluidSection constraints
-** ElementFluid1D
-**Fluid Section Inlet 
-*BOUNDARY 
-2,2,2,0.1
-** ElementFluid1D001
-** ElementFluid1D002
-** ElementFluid1D003
-** ElementFluid1D004
-** ElementFluid1D005
-** ElementFluid1D006
-** ElementFluid1D007
-** ElementFluid1D008
-** ElementFluid1D009
-** ElementFluid1D010
-**Fluid Section Outlet 
-*BOUNDARY 
-13,2,2,0.1
-
-***********************************************************
-** Outputs --> frd file
-*NODE FILE, OUTPUT=2d
-MF, PS
-
-***********************************************************
-*END STEP 
-
-***********************************************************
-** CalculiX Input file
-**   written by    --> FreeCAD 0.17.11265 (Git)
-**   written on    --> Fri Jun  9 11:49:27 2017
-**   file name     --> Resevoir_rev1.fcstd
-**   analysis name --> Analysis
-**
-**
-***********************************************************
-**  About units:
-**  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers they provide have consistent units.
-**  The user is the FreeCAD calculix writer module ;-)
-**
-**  The unit system which is used at Guido Dhondt's company: mm, N, s, K
-**  Since Length and Mass are connected by Force, if Length is mm the Mass is in t to get N
-**  The following units are used to write to inp file:
-**
-**  Length: mm (this includes the mesh geometry)
-**  Mass: t
-**  TimeSpan: s
-**  Temperature: K
-**
-**  This leads to:
-**  Force: N
-**  Pressure: N/mm^2 == MPa (Young's Modulus has unit Pressure)
-**  Density: t/mm^3
-**  Gravity: mm/s^2
-**  Thermal conductivity: t*mm/K/s^3 == as W/m/K == kW/mm/K
-**  Specific Heat: mm^2/s^2/K = J/kg/K == kJ/t/K
-**
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values
deleted file mode 100644
index b216226c88..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_expected_values
+++ /dev/null
@@ -1,13 +0,0 @@
-U1: (0.0000000000, 0.0000000000)
-U2: (0.0000000000, 0.0000000000)
-U3: (0.0000000000, 0.0000000000)
-Uabs: (0.0000000000, 0.0000000000)
-Sabs: (0.0000000000, 0.0000000000)
-MaxPrin: (0.0000000000, 0.0000000000)
-MidPrin: (0.0000000000, 0.0000000000)
-MinPrin: (0.0000000000, 0.0000000000)
-MaxShear: (0.0000000000, 0.0000000000)
-Peeq: (0.0000000000, 0.0000000000)
-Temp: (0.0000000000, 0.0000000000)
-MFlow: (78.3918000000, 78.3918000000)
-NPress: (0.1000000000, 0.1916470000)
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt b/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt
deleted file mode 100644
index d4dbdf3288..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_flow1D_inout_nodes.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-2,15,1,PIPE INLET
-13,27,28,PIPE OUTLET
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd b/src/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd
deleted file mode 100644
index 4a32de00b5..0000000000
Binary files a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.FCStd and /dev/null differ
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.dat b/src/Mod/Fem/femtest/data/calculix/thermomech_spine.dat
deleted file mode 100644
index 936450e124..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.dat
+++ /dev/null
@@ -1,99 +0,0 @@
-
- displacements (vx,vy,vz) for set NALL and time  0.1000000E+01
-
-         1 -3.528920E-04 -1.607265E-03  2.909952E-04
-         2  2.414060E-04 -1.633822E-03 -1.853288E-03
-         3 -9.424549E-04  4.428105E-04  2.771396E-04
-         4 -3.226398E-04  4.979279E-04 -1.772741E-03
-         5  0.000000E+00  0.000000E+00  0.000000E+00
-         6  0.000000E+00  0.000000E+00  0.000000E+00
-         7  0.000000E+00  0.000000E+00  0.000000E+00
-         8  0.000000E+00  0.000000E+00  0.000000E+00
-         9  6.497743E-03  1.465271E-03  1.423301E-03
-        10  5.973524E-03  2.188986E-03  1.226248E-03
-        11  6.107115E-03  1.379316E-03  2.142315E-03
-        12  5.278299E-03  2.223176E-03  2.206754E-03
-        13  0.000000E+00  0.000000E+00  0.000000E+00
-        14  5.374170E-03  1.530415E-03  1.627616E-03
-        15  4.172156E-03 -1.279326E-04 -2.888770E-04
-        16 -6.402534E-05 -5.734986E-04 -1.805846E-03
-        17  6.273579E-03  1.015862E-03  1.881209E-03
-        18  3.442920E-03  1.444228E-03 -3.140252E-04
-        19  0.000000E+00  0.000000E+00  0.000000E+00
-        20  6.151863E-03  1.868375E-03  9.987790E-04
-        21  3.545820E-03 -1.573950E-04  1.314125E-03
-        22 -6.669789E-04 -5.836042E-04  2.690565E-04
-        23  7.298184E-03  4.600588E-04  4.370063E-04
-        24  2.781094E-03  1.422367E-03  1.325989E-03
-        25 -8.075035E-05 -1.614211E-03 -7.858403E-04
-        26  0.000000E+00  0.000000E+00  0.000000E+00
-        27 -6.520539E-04  4.563826E-04 -7.493165E-04
-        28  0.000000E+00  0.000000E+00  0.000000E+00
-        29  0.000000E+00  0.000000E+00  0.000000E+00
-        30  5.968876E-03  1.136728E-03  1.715788E-03
-        31  6.208296E-03  1.828309E-03  1.351549E-03
-        32  3.705176E-03  6.476975E-04 -3.319447E-04
-        33  6.674510E-03  1.336536E-03  6.867144E-04
-        34  5.648514E-03  1.774858E-03  2.144001E-03
-        35  3.054681E-03  5.940299E-04  1.312598E-03
-        36 -3.825444E-04 -5.764131E-04 -7.639972E-04
-        37  5.854479E-03  1.664649E-03  1.156343E-03
-        38  3.819112E-03 -1.351665E-04  5.335788E-04
-        39  6.253031E-03  1.452062E-03  1.806114E-03
-        40  6.662732E-03  6.703750E-04  1.318915E-03
-        41  3.069055E-03  1.443477E-03  4.976009E-04
-        42  5.567794E-03  2.180294E-03  1.715833E-03
-        43  6.251519E-03  1.175361E-03  1.200113E-03
-        44  5.885002E-03  1.835643E-03  1.790733E-03
-        45  3.338236E-03  6.205920E-04  4.915932E-04
-
- stresses (elem, integ.pnt.,sxx,syy,szz,sxy,sxz,syz) for set EALL and time  0.1000000E+01
-
-         1   1  3.404960E+00 -1.223741E+00 -1.146617E+01 -1.014816E+00  5.721404E-01  1.914876E+00
-         1   2  1.400224E+00 -2.953124E+00 -1.263874E+01 -6.892873E-01  7.925952E-01  2.418160E-02
-         1   3 -1.932021E-02  4.145572E+00  1.075800E+01  1.341622E-01 -1.077867E+00 -8.810057E-01
-         1   4  8.558867E-01  2.410724E+00  5.031899E+00 -4.538675E-01 -8.363957E-01 -8.545765E-01
-         2   1 -2.390976E-01 -6.281387E-01 -3.372011E-01 -4.253012E-01 -4.313375E-01 -3.639082E-02
-         2   2 -7.078629E-01 -1.051329E+00  9.460542E-02  3.391396E-02  6.619598E-02 -1.109819E-01
-         2   3 -4.586067E-01 -6.902739E-01  2.326885E-01  4.933190E-02 -3.895851E-01  2.906021E-01
-         2   4  8.177110E-01  6.474442E-01  1.691349E-01 -5.346077E-02  3.495037E-01  1.078309E-01
-         3   1 -3.738220E-01  5.244382E-02  5.043071E-02 -4.322174E-02 -5.119367E-02 -6.329539E-02
-         3   2 -4.870176E-01 -1.365642E-01 -3.659017E-02 -8.585698E-02 -1.108073E-01  5.250735E-02
-         3   3 -4.940118E-01 -4.307143E-02 -1.464103E-01 -1.050280E-01 -7.625476E-02  6.477853E-02
-         3   4  8.967718E-01  1.138003E-01  1.116798E-01  1.910842E-01  1.655394E-01 -5.121702E-02
-         4   1  4.012653E-01  3.057826E-02  5.455659E-01  1.235586E-01 -1.238112E-01  6.349248E-02
-         4   2 -8.194046E-04 -3.368150E-01 -6.142789E-01  2.034512E-01  3.075178E-01 -1.461547E-01
-         4   3  2.066455E-01  2.004212E-01 -5.374576E-02  2.225878E-01  2.561197E-01  1.619756E-01
-         4   4  4.741484E-01  1.602642E-01  5.137134E-01  2.176972E-01 -5.926745E-03 -2.173092E-02
-         5   1 -7.946980E-01 -4.942827E-01 -5.447915E-01 -1.912366E-01 -1.683255E-01 -2.154803E-01
-         5   2  1.223945E+00  7.271678E-01  7.742165E-01  1.161181E-01  9.021013E-02  2.591346E-01
-         5   3 -6.114285E-01 -1.081211E-01 -5.044171E-01 -1.959176E-01 -1.243099E-01 -8.182985E-03
-         5   4 -6.040667E-01 -4.628108E-01 -1.156609E-01 -1.356655E-01 -1.859799E-01 -1.577666E-02
-         6   1 -2.158509E-01 -5.325126E-01 -4.515843E-01 -3.866704E-01 -4.162330E-01 -4.108670E-02
-         6   2 -6.757261E-01 -4.613765E-02 -8.915881E-01  2.110811E-01 -5.724646E-02 -1.256511E-01
-         6   3  8.281455E-01  2.923749E-01  6.409637E-01  3.355626E-01  1.417774E-02  2.255109E-02
-         6   4 -4.816843E-01 -1.251024E-01 -7.976278E-01 -1.806942E-01  6.804089E-02  3.420348E-01
-         7   1  3.148795E-01  4.842984E-01 -1.212845E-01 -1.396304E-01  1.576929E-01  5.180396E-02
-         7   2  1.572111E-01 -5.768416E-01 -1.511784E-01  3.266388E-01  8.790621E-02 -1.028829E-01
-         7   3  4.376864E-01  4.768444E-01  1.206219E-01 -1.718879E-02  2.159821E-01 -1.329976E-02
-         7   4  3.287772E-01 -3.254589E-02  1.220524E-01  2.782618E-01  2.770364E-01  1.119853E-01
-         8   1  5.701030E-01  2.661561E-01  2.350779E-01  2.473974E-01  1.920553E-01 -8.597329E-02
-         8   2 -5.767263E+00 -1.361109E+00 -2.493103E+00  1.062399E+00  1.121190E+00 -7.464096E-02
-         8   3 -2.791280E+00 -2.396505E-01 -1.198247E+00  8.020567E-01  4.148892E-01  2.533118E-01
-         8   4  4.664713E+00  1.415554E+00  2.781100E+00 -1.310904E+00 -5.274516E-01 -6.913113E-01
-         9   1  6.199650E-01  3.396960E-01  1.887766E-01  2.972053E-01  1.410676E-01 -8.629576E-02
-         9   2 -5.726302E+00 -2.197206E+00 -1.667618E+00  9.736955E-01  1.208750E+00 -6.498466E-02
-         9   3  4.686756E+00  2.719609E+00  1.615152E+00 -6.160644E-01 -1.223586E+00 -7.749438E-01
-         9   4 -2.704298E+00 -1.154649E+00 -6.016097E-01  4.111997E-01  8.008334E-01  3.444956E-01
-        10   1 -5.437203E+00 -2.644227E+01 -2.765793E+01  8.276053E-01  9.432501E-01  1.482137E-01
-        10   2 -4.193540E-01 -2.423150E+01 -2.544716E+01 -1.315881E-01 -8.004705E-02  1.482137E-01
-        10   3 -3.379018E+00 -2.551852E+01 -2.673417E+01  1.043734E+00  2.548021E-01  1.482137E-01
-        10   4  6.954096E+00  1.762891E+01  1.247931E+01 -1.762986E+00 -5.844363E-01  6.278434E-01
-        11   1 -3.459645E+00 -2.680162E+01 -2.553961E+01  2.300758E-01  1.008848E+00  1.532041E-01
-        11   2 -4.441059E-01 -2.549031E+01 -2.422831E+01 -5.195025E-02 -1.737574E-01  1.532041E-01
-        11   3 -5.461955E+00 -2.770109E+01 -2.643908E+01  9.072431E-01  8.495398E-01  1.532041E-01
-        11   4  6.904522E+00  1.232019E+01  1.766614E+01 -5.323384E-01 -1.829156E+00  6.489831E-01
-        12   1  1.094742E-01  1.057881E+01  3.957891E+00 -1.038625E+00  4.987185E-01 -7.917258E-01
-        12   2  8.440135E-01  5.019593E+00  2.575092E+00 -9.132367E-01 -2.821124E-01 -7.648862E-01
-        12   3  1.344229E+00 -1.260257E+01 -2.845529E+00  6.886793E-01 -8.322797E-01 -1.251042E-01
-        12   4  3.283453E+00 -1.148053E+01 -1.218374E+00  5.266032E-01 -1.187474E+00  1.955865E+00
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.frd b/src/Mod/Fem/femtest/data/calculix/thermomech_spine.frd
deleted file mode 100644
index 0b83b7cf08..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.frd
+++ /dev/null
@@ -1,298 +0,0 @@
-    1C
-    1UUSER                                                              
-    1UDATE              07.february.2018                                
-    1UTIME              13:19:12                                        
-    1UHOST                                                              
-    1UPGM               CalculiX                                        
-    1UVERSION           Version 2.11                             
-    1UCOMPILETIME       So 31. Jul 13:26:31 CEST 2016                    
-    1UDIR                                                               
-    1UDBN                                                               
-    1UMAT    1MECHANICALMATERIAL                                        
-    2C                            45                                     1
- -1         1 2.03200E+02 2.54000E+01 0.00000E+00
- -1         2 2.03200E+02 2.54000E+01 2.54000E+01
- -1         3 2.03200E+02 0.00000E+00 0.00000E+00
- -1         4 2.03200E+02 0.00000E+00 2.54000E+01
- -1         5 0.00000E+00 2.54000E+01 0.00000E+00
- -1         6 0.00000E+00 2.54000E+01 2.54000E+01
- -1         7 0.00000E+00 0.00000E+00 0.00000E+00
- -1         8 0.00000E+00 0.00000E+00 2.54000E+01
- -1         9 9.83488E+01 2.54000E+01 2.54000E+01
- -1        10 1.02616E+02 0.00000E+00 2.54000E+01
- -1        11 9.83488E+01 2.54000E+01 0.00000E+00
- -1        12 1.02616E+02 0.00000E+00 0.00000E+00
- -1        13 0.00000E+00 1.27000E+01 2.54000E+01
- -1        14 4.91744E+01 2.54000E+01 2.54000E+01
- -1        15 1.50774E+02 2.54000E+01 2.54000E+01
- -1        16 2.03200E+02 1.27000E+01 2.54000E+01
- -1        17 5.13080E+01 0.00000E+00 2.54000E+01
- -1        18 1.52908E+02 0.00000E+00 2.54000E+01
- -1        19 0.00000E+00 1.27000E+01 0.00000E+00
- -1        20 4.91744E+01 2.54000E+01 0.00000E+00
- -1        21 1.50774E+02 2.54000E+01 0.00000E+00
- -1        22 2.03200E+02 1.27000E+01 0.00000E+00
- -1        23 5.13080E+01 0.00000E+00 0.00000E+00
- -1        24 1.52908E+02 0.00000E+00 0.00000E+00
- -1        25 2.03200E+02 2.54000E+01 1.27000E+01
- -1        26 0.00000E+00 2.54000E+01 1.27000E+01
- -1        27 2.03200E+02 0.00000E+00 1.27000E+01
- -1        28 0.00000E+00 0.00000E+00 1.27000E+01
- -1        29 0.00000E+00 1.27000E+01 1.27000E+01
- -1        30 5.13080E+01 1.27000E+01 2.54000E+01
- -1        31 1.00482E+02 1.27000E+01 2.54000E+01
- -1        32 1.52908E+02 1.27000E+01 2.54000E+01
- -1        33 5.13080E+01 1.27000E+01 0.00000E+00
- -1        34 1.00482E+02 1.27000E+01 0.00000E+00
- -1        35 1.52908E+02 1.27000E+01 0.00000E+00
- -1        36 2.03200E+02 1.27000E+01 1.27000E+01
- -1        37 4.91744E+01 2.54000E+01 1.27000E+01
- -1        38 1.50774E+02 2.54000E+01 1.27000E+01
- -1        39 9.83488E+01 2.54000E+01 1.27000E+01
- -1        40 5.13080E+01 0.00000E+00 1.27000E+01
- -1        41 1.52908E+02 0.00000E+00 1.27000E+01
- -1        42 1.02616E+02 0.00000E+00 1.27000E+01
- -1        43 5.13080E+01 1.27000E+01 1.27000E+01
- -1        44 1.00482E+02 1.27000E+01 1.27000E+01
- -1        45 1.52908E+02 1.27000E+01 1.27000E+01
- -3
-    3C                            12                                     1
- -1         1    6    0    1
- -2         5         6        12        11        26        43        33        20        37        34
- -1         2    6    0    1
- -2         9        12        11         2        44        34        39        15        45        38
- -1         3    6    0    1
- -2         3         4         1        12        27        36        22        24        41        35
- -1         4    6    0    1
- -2         2        12        11         1        45        34        38        25        35        21
- -1         5    6    0    1
- -2         2        12         1         4        45        35        25        16        41        36
- -1         6    6    0    1
- -2         9        12         2        10        44        45        15        31        42        32
- -1         7    6    0    1
- -2         2        12         4        10        45        41        16        32        42        18
- -1         8    6    0    1
- -2         9        12        10         6        44        42        31        14        43        30
- -1         9    6    0    1
- -2         9        12         6        11        44        43        14        39        34        37
- -1        10    6    0    1
- -2         6         7         5        12        29        19        26        43        23        33
- -1        11    6    0    1
- -2         8         7         6        12        28        29        13        40        23        43
- -1        12    6    0    1
- -2        12        10         6         8        42        30        43        40        17        13
- -3
-    1PSTEP                         1           1           1          
-  100CL  101 1.000000000          45                     0    1           1
- -4  DISP        4    1
- -5  D1          1    2    1    0
- -5  D2          1    2    2    0
- -5  D3          1    2    3    0
- -5  ALL         1    2    0    0    1ALL
- -1         1-3.52892E-04-1.60726E-03 2.90995E-04
- -1         2 2.41406E-04-1.63382E-03-1.85329E-03
- -1         3-9.42455E-04 4.42810E-04 2.77140E-04
- -1         4-3.22640E-04 4.97928E-04-1.77274E-03
- -1         5 0.00000E+00 0.00000E+00 0.00000E+00
- -1         6 0.00000E+00 0.00000E+00 0.00000E+00
- -1         7 0.00000E+00 0.00000E+00 0.00000E+00
- -1         8 0.00000E+00 0.00000E+00 0.00000E+00
- -1         9 6.49774E-03 1.46527E-03 1.42330E-03
- -1        10 5.97352E-03 2.18899E-03 1.22625E-03
- -1        11 6.10712E-03 1.37932E-03 2.14231E-03
- -1        12 5.27830E-03 2.22318E-03 2.20675E-03
- -1        13 0.00000E+00 0.00000E+00 0.00000E+00
- -1        14 5.37417E-03 1.53042E-03 1.62762E-03
- -1        15 4.17216E-03-1.27933E-04-2.88877E-04
- -1        16-6.40253E-05-5.73499E-04-1.80585E-03
- -1        17 6.27358E-03 1.01586E-03 1.88121E-03
- -1        18 3.44292E-03 1.44423E-03-3.14025E-04
- -1        19 0.00000E+00 0.00000E+00 0.00000E+00
- -1        20 6.15186E-03 1.86837E-03 9.98779E-04
- -1        21 3.54582E-03-1.57395E-04 1.31413E-03
- -1        22-6.66979E-04-5.83604E-04 2.69057E-04
- -1        23 7.29818E-03 4.60059E-04 4.37006E-04
- -1        24 2.78109E-03 1.42237E-03 1.32599E-03
- -1        25-8.07503E-05-1.61421E-03-7.85840E-04
- -1        26 0.00000E+00 0.00000E+00 0.00000E+00
- -1        27-6.52054E-04 4.56383E-04-7.49317E-04
- -1        28 0.00000E+00 0.00000E+00 0.00000E+00
- -1        29 0.00000E+00 0.00000E+00 0.00000E+00
- -1        30 5.96888E-03 1.13673E-03 1.71579E-03
- -1        31 6.20830E-03 1.82831E-03 1.35155E-03
- -1        32 3.70518E-03 6.47697E-04-3.31945E-04
- -1        33 6.67451E-03 1.33654E-03 6.86714E-04
- -1        34 5.64851E-03 1.77486E-03 2.14400E-03
- -1        35 3.05468E-03 5.94030E-04 1.31260E-03
- -1        36-3.82544E-04-5.76413E-04-7.63997E-04
- -1        37 5.85448E-03 1.66465E-03 1.15634E-03
- -1        38 3.81911E-03-1.35167E-04 5.33579E-04
- -1        39 6.25303E-03 1.45206E-03 1.80611E-03
- -1        40 6.66273E-03 6.70375E-04 1.31891E-03
- -1        41 3.06906E-03 1.44348E-03 4.97601E-04
- -1        42 5.56779E-03 2.18029E-03 1.71583E-03
- -1        43 6.25152E-03 1.17536E-03 1.20011E-03
- -1        44 5.88500E-03 1.83564E-03 1.79073E-03
- -1        45 3.33824E-03 6.20592E-04 4.91593E-04
- -3
-    1PSTEP                         2           1           1          
-  100CL  101 1.000000000          45                     0    1           1
- -4  NDTEMP      1    1
- -5  T           1    1    0    0
- -1         1 2.93448E+02
- -1         2 2.93450E+02
- -1         3 2.93447E+02
- -1         4 2.93448E+02
- -1         5 3.10930E+02
- -1         6 3.10930E+02
- -1         7 3.10930E+02
- -1         8 3.10930E+02
- -1         9 2.97847E+02
- -1        10 2.97499E+02
- -1        11 2.97850E+02
- -1        12 2.97500E+02
- -1        13 3.10930E+02
- -1        14 3.03172E+02
- -1        15 2.94529E+02
- -1        16 2.93481E+02
- -1        17 3.02885E+02
- -1        18 2.94442E+02
- -1        19 3.10930E+02
- -1        20 3.03166E+02
- -1        21 2.94529E+02
- -1        22 2.93479E+02
- -1        23 3.02896E+02
- -1        24 2.94443E+02
- -1        25 2.93481E+02
- -1        26 3.10930E+02
- -1        27 2.93479E+02
- -1        28 3.10930E+02
- -1        29 3.10930E+02
- -1        30 3.02924E+02
- -1        31 2.97706E+02
- -1        32 2.94475E+02
- -1        33 3.02918E+02
- -1        34 2.97708E+02
- -1        35 2.94475E+02
- -1        36 2.93511E+02
- -1        37 3.03205E+02
- -1        38 2.94563E+02
- -1        39 2.97884E+02
- -1        40 3.02918E+02
- -1        41 2.94475E+02
- -1        42 2.97534E+02
- -1        43 3.02967E+02
- -1        44 2.97741E+02
- -1        45 2.94507E+02
- -3
-    1PSTEP                         3           1           1          
-  100CL  101 1.000000000          45                     0    1           1
- -4  STRESS      6    1
- -5  SXX         1    4    1    1
- -5  SYY         1    4    2    2
- -5  SZZ         1    4    3    3
- -5  SXY         1    4    1    2
- -5  SYZ         1    4    2    3
- -5  SZX         1    4    3    1
- -1         1-4.53738E-01 3.73536E-02-1.00109E-01-9.47617E-02 1.77408E-02-1.51106E-01
- -1         2 6.76163E-01 5.57167E-01 3.93053E-01 9.19447E-03-2.19576E-02 1.03283E-01
- -1         3-6.94336E-01 1.21406E-01 1.19222E-01-8.33520E-02-1.42390E-01-9.20018E-02
- -1         4-4.86420E-01-9.13616E-02 2.18851E-02-1.77756E-01 1.02462E-02-8.88126E-02
- -1         5-4.90191E-01-2.12178E+01-3.10168E+01 3.48621E-01 2.10946E+00 9.27016E-01
- -1         6 4.44326E-01-1.76073E+01-1.74489E+01-5.30985E-02-5.47862E-01-7.68178E-03
- -1         7-2.32590E-01-3.60860E+01-3.60860E+01-2.87061E-01-2.98564E-06-3.43873E-01
- -1         8-6.79057E-01-3.10337E+01-2.12527E+01 8.74354E-01 2.14436E+00 1.01225E-01
- -1         9 9.96582E-01-1.28958E-01-1.23270E-02-2.61541E-01-8.31058E-02-3.90432E-01
- -1        10-1.40200E+00 3.23778E+00 3.71605E-01-4.55981E-02-2.60699E-02 2.86837E-01
- -1        11-1.40678E+00 3.95959E-01 3.21244E+00 1.73427E-01-2.67676E-02-1.25872E-01
- -1        12 6.24639E-01 1.09103E+01 1.09159E+01-1.48036E-02-2.04464E-01-2.53413E-03
- -1        13-2.88244E+00-3.21637E+01-2.26651E+01 1.34351E+00 9.81067E-01 2.10729E-01
- -1        14 6.88912E+00 2.68300E+00 2.87074E+00-1.06123E+00-7.33589E-01-1.12140E+00
- -1        15 8.40794E-01 2.06225E-01 2.19052E-01-2.31894E-01-3.97863E-02-1.47438E-01
- -1        16-4.31122E-01 1.45477E-04-3.04612E-01-2.76802E-01-1.18151E-01-4.32834E-02
- -1        17 2.88996E+00-4.60161E+00 7.53864E-01-2.04652E-01 1.24684E+00-1.08584E+00
- -1        18 4.74195E-01 3.88042E-01 2.80524E-01 1.53423E-01 9.56225E-02 3.22964E-01
- -1        19-3.54169E+00-3.75250E+01-3.75250E+01 1.02699E+00-2.93621E-06 3.04988E-02
- -1        20 3.02036E+00 5.91797E-01-4.62424E+00-1.01664E+00 1.12257E+00-1.25632E-01
- -1        21 4.27027E-01 3.86433E-01 3.93354E-01 2.55145E-01 1.39004E-01 1.45641E-01
- -1        22-8.28713E-01 1.46169E-02-1.00853E-01-1.52454E-01 8.01147E-04-1.20021E-01
- -1        23 7.99731E+00 8.45146E+00 8.53531E+00-1.46759E+00 5.45268E-01-1.55123E+00
- -1        24 7.26232E-01 1.90005E-01 1.87701E-01 1.78610E-01-1.28886E-01 1.50313E-01
- -1        25-3.42257E-01-1.86251E-01 5.53673E-03-8.13733E-02-1.13626E-01-2.43143E-01
- -1        26-2.76144E+00-2.27010E+01-3.21887E+01 4.09777E-01 1.05253E+00 1.43511E+00
- -1        27-8.20893E-01-8.99112E-02 2.19296E-02-1.31020E-01-1.29185E-02-1.58652E-01
- -1        28-3.60397E+00-3.75520E+01-3.75520E+01 2.82532E-02-3.03507E-06 9.78322E-01
- -1        29-5.84272E+00-3.85577E+01-3.85577E+01 7.85351E-01-2.98564E-06 8.00209E-01
- -1        30 1.92175E+00-2.28320E+00 4.56487E-01-4.19932E-01-6.92236E-01-5.92802E-01
- -1        31-1.03384E+00-3.01747E-01-9.00699E-01 1.48943E-01 3.23703E-01 1.95833E-02
- -1        32 4.46350E-01 3.55258E-01 1.49194E-01 9.80401E-02 2.57446E-01 2.35313E-01
- -1        33 3.37197E+00 5.90391E+00 3.32794E+00-5.78086E-01 8.14633E-01-4.64516E-01
- -1        34-2.62374E+00 3.38381E-01 4.31970E+00 4.85350E-01-3.46979E-01 6.24124E-02
- -1        35 5.71570E-01 2.21860E-01 5.22163E-02 1.26573E-01 2.77652E-02 1.35767E-01
- -1        36-1.03563E+00-3.65280E-01-3.85347E-01-2.22582E-01 4.86994E-02-2.06781E-01
- -1        37 1.98040E+00 2.49185E-01-2.32912E+00-6.05581E-01-6.46390E-01-3.19145E-01
- -1        38 4.64346E-01 3.62889E-01 4.14507E-01 1.33750E-01 3.01083E-01 4.71257E-02
- -1        39-9.81707E-01-8.81275E-01-2.41914E-01 8.22353E-02 3.37538E-01-1.30008E-02
- -1        40 3.34038E+00 3.16765E+00 5.79368E+00-4.26839E-01 8.85563E-01-5.42658E-01
- -1        41 6.06022E-01 5.27371E-02 3.07486E-01 1.47426E-01 4.06582E-02 6.93748E-02
- -1        42-2.54132E+00 4.34811E+00 2.93553E-01 1.15149E-01-3.16017E-01 6.14621E-01
- -1        43 6.78824E-01 2.27117E+00 2.28173E+00-2.34027E-01-4.11792E-01-1.31573E-01
- -1        44-2.80817E+00-1.27522E+00-1.29605E+00 4.50775E-01-1.18467E-01 4.07101E-01
- -1        45 3.24976E-01 5.53110E-02 6.26034E-02 1.91749E-01-7.93652E-02 1.62616E-01
- -3
-    1PSTEP                         4           1           1          
-  100CL  101 1.000000000          45                     0    1           1
- -4  TOSTRAIN    6    1
- -5  EXX         1    4    1    1
- -5  EYY         1    4    2    2
- -5  EZZ         1    4    3    3
- -5  EXY         1    4    1    2
- -5  EYZ         1    4    2    3
- -5  EZX         1    4    3    1
- -1         1-8.63983E-05-8.32062E-05-8.40997E-05-6.15951E-07 1.15315E-07-9.82187E-07
- -1         2-8.83097E-05-8.90832E-05-9.01499E-05 5.97641E-08-1.42724E-07 6.71339E-07
- -1         3-8.62301E-05-8.09278E-05-8.09420E-05-5.41788E-07-9.25535E-07-5.98012E-07
- -1         4-8.64126E-05-8.38447E-05-8.31086E-05-1.15541E-06 6.66005E-08-5.77282E-07
- -1         5 1.98423E-04 6.36931E-05-2.55315E-10 2.26603E-06 1.37115E-05 6.02561E-06
- -1         6 1.73330E-04 5.59946E-05 5.70242E-05-3.45141E-07-3.56110E-06-4.99315E-08
- -1         7 2.33047E-04-2.97804E-10-3.00789E-10-1.86590E-06-1.94066E-11-2.23518E-06
- -1         8 1.97305E-04-2.43777E-10 6.35761E-05 5.68330E-06 1.39384E-05 6.57961E-07
- -1         9-2.47109E-05-3.20269E-05-3.12688E-05-1.70002E-06-5.40187E-07-2.53781E-06
- -1        10-5.00257E-05-1.98671E-05-3.84972E-05-2.96388E-07-1.69454E-07 1.86444E-06
- -1        11-4.57651E-05-3.40473E-05-1.57402E-05 1.12727E-06-1.73989E-07-8.18165E-07
- -1        12-7.09259E-05-4.06895E-06-4.03246E-06-9.62237E-08-1.32902E-06-1.64719E-08
- -1        13 1.90328E-04-2.43777E-10 6.17407E-05 8.73279E-06 6.37693E-06 1.36974E-06
- -1        14 6.60688E-05 3.87290E-05 3.99492E-05-6.89802E-06-4.76833E-06-7.28908E-06
- -1        15-5.96681E-05-6.37928E-05-6.37094E-05-1.50731E-06-2.58611E-07-9.58345E-07
- -1        16-8.67297E-05-8.39265E-05-8.59074E-05-1.79921E-06-7.67981E-07-2.81342E-07
- -1        17 5.82119E-05 9.51671E-06 4.43273E-05-1.33024E-06 8.10445E-06-7.05796E-06
- -1        18-6.25954E-05-6.31554E-05-6.38543E-05 9.97247E-07 6.21546E-07 2.09927E-06
- -1        19 2.20891E-04-3.77887E-10-2.21348E-10 6.67544E-06-1.90853E-11 1.98242E-07
- -1        20 6.20962E-05 4.63105E-05 1.24063E-05-6.60817E-06 7.29673E-06-8.16607E-07
- -1        21-6.16104E-05-6.18743E-05-6.18293E-05 1.65844E-06 9.03528E-07 9.46665E-07
- -1        22-8.61925E-05-8.07109E-05-8.14614E-05-9.90948E-07 5.20745E-09-7.80137E-07
- -1        23 5.14361E-05 5.43881E-05 5.49331E-05-9.53931E-06 3.54424E-06-1.00830E-05
- -1        24-6.18456E-05-6.53311E-05-6.53461E-05 1.16097E-06-8.37759E-07 9.77037E-07
- -1        25-8.66806E-05-8.56666E-05-8.44199E-05-5.28926E-07-7.38571E-07-1.58043E-06
- -1        26 1.91277E-04 6.16699E-05-2.55315E-10 2.66355E-06 6.84142E-06 9.32821E-06
- -1        27-8.61816E-05-8.14302E-05-8.07032E-05-8.51628E-07-8.39700E-08-1.03124E-06
- -1        28 2.20662E-04-2.17721E-10-3.80229E-10 1.83646E-07-1.97279E-11 6.35909E-06
- -1        29 2.12647E-04-2.97804E-10-3.00789E-10 5.10478E-06-1.94066E-11 5.20136E-06
- -1        30 5.01809E-05 2.28487E-05 4.06567E-05-2.72956E-06-4.49954E-06-3.85321E-06
- -1        31-3.53939E-05-3.06353E-05-3.45285E-05 9.68133E-07 2.10407E-06 1.27292E-07
- -1        32-6.28608E-05-6.34529E-05-6.47923E-05 6.37260E-07 1.67340E-06 1.52953E-06
- -1        33 4.07110E-05 5.71687E-05 4.04249E-05-3.75756E-06 5.29511E-06-3.01935E-06
- -1        34-5.53363E-05-3.60826E-05-1.02040E-05 3.15478E-06-2.25537E-06 4.05681E-07
- -1        35-6.19227E-05-6.41958E-05-6.52985E-05 8.22722E-07 1.80474E-07 8.82484E-07
- -1        36-8.60403E-05-8.16830E-05-8.18135E-05-1.44678E-06 3.16546E-07-1.34407E-06
- -1        37 5.36867E-05 4.24338E-05 2.56748E-05-3.93628E-06-4.20153E-06-2.07444E-06
- -1        38-6.16835E-05-6.23429E-05-6.20074E-05 8.69377E-07 1.95704E-06 3.06317E-07
- -1        39-3.31161E-05-3.24633E-05-2.83074E-05 5.34530E-07 2.19400E-06-8.45054E-08
- -1        40 4.08853E-05 3.97625E-05 5.68317E-05-2.77445E-06 5.75616E-06-3.52728E-06
- -1        41-6.18352E-05-6.54315E-05-6.37756E-05 9.58266E-07 2.64278E-07 4.50936E-07
- -1        42-5.70291E-05-1.22478E-05-3.86025E-05 7.48468E-07-2.05411E-06 3.99504E-06
- -1        43 3.44133E-05 4.47636E-05 4.48322E-05-1.52118E-06-2.67664E-06-8.55224E-07
- -1        44-4.19714E-05-3.20072E-05-3.21426E-05 2.93004E-06-7.70035E-07 2.64615E-06
- -1        45-6.28176E-05-6.45704E-05-6.45230E-05 1.24637E-06-5.15874E-07 1.05700E-06
- -3
- 9999
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp b/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp
deleted file mode 100644
index 92a36026b0..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_spine.inp
+++ /dev/null
@@ -1,227 +0,0 @@
-** written by FreeCAD inp file writer for CalculiX,Abaqus meshes
-** highest dimension mesh elements only.
-
-** Nodes
-*Node, NSET=Nall
-1, 203.2, 25.4, 0
-2, 203.2, 25.4, 25.4
-3, 203.2, 0, 0
-4, 203.2, 0, 25.4
-5, 0, 25.4, 0
-6, 0, 25.4, 25.4
-7, 0, 0, 0
-8, 0, 0, 25.4
-9, 98.3488, 25.4, 25.4
-10, 102.616, 0, 25.4
-11, 98.3488, 25.4, 0
-12, 102.616, 0, 0
-13, 0, 12.7, 25.4
-14, 49.1744, 25.4, 25.4
-15, 150.774, 25.4, 25.4
-16, 203.2, 12.7, 25.4
-17, 51.308, 0, 25.4
-18, 152.908, 0, 25.4
-19, 0, 12.7, 0
-20, 49.1744, 25.4, 0
-21, 150.774, 25.4, 0
-22, 203.2, 12.7, 0
-23, 51.308, 0, 0
-24, 152.908, 0, 0
-25, 203.2, 25.4, 12.7
-26, 0, 25.4, 12.7
-27, 203.2, 0, 12.7
-28, 0, 0, 12.7
-29, 0, 12.7, 12.7
-30, 51.308, 12.7, 25.4
-31, 100.482, 12.7, 25.4
-32, 152.908, 12.7, 25.4
-33, 51.308, 12.7, 0
-34, 100.482, 12.7, 0
-35, 152.908, 12.7, 0
-36, 203.2, 12.7, 12.7
-37, 49.1744, 25.4, 12.7
-38, 150.774, 25.4, 12.7
-39, 98.3488, 25.4, 12.7
-40, 51.308, 0, 12.7
-41, 152.908, 0, 12.7
-42, 102.616, 0, 12.7
-43, 51.308, 12.7, 12.7
-44, 100.482, 12.7, 12.7
-45, 152.908, 12.7, 12.7
-
-
-** Volume elements
-*Element, TYPE=C3D10, ELSET=Evolumes
-1, 5, 6, 12, 11, 26, 43, 33, 20, 37, 34
-2, 9, 12, 11, 2, 44, 34, 39, 15, 45, 38
-3, 3, 4, 1, 12, 27, 36, 22, 24, 41, 35
-4, 2, 12, 11, 1, 45, 34, 38, 25, 35, 21
-5, 2, 12, 1, 4, 45, 35, 25, 16, 41, 36
-6, 9, 12, 2, 10, 44, 45, 15, 31, 42, 32
-7, 2, 12, 4, 10, 45, 41, 16, 32, 42, 18
-8, 9, 12, 10, 6, 44, 42, 31, 14, 43, 30
-9, 9, 12, 6, 11, 44, 43, 14, 39, 34, 37
-10, 6, 7, 5, 12, 29, 19, 26, 43, 23, 33
-11, 8, 7, 6, 12, 28, 29, 13, 40, 23, 43
-12, 12, 10, 6, 8, 42, 30, 43, 40, 17, 13
-
-** Define element set Eall
-*ELSET, ELSET=Eall
-Evolumes
-
-
-
-***********************************************************
-** Element sets for materials and FEM element type (solid, shell, beam, fluid)
-*ELSET,ELSET=MechanicalMaterialSolid
-Evolumes
-
-***********************************************************
-** constraints fixed node sets
-** FemConstraintFixed
-*NSET,NSET=FemConstraintFixed
-5,
-6,
-7,
-8,
-13,
-19,
-26,
-28,
-29,
-
-***********************************************************
-** constraints temperature node sets
-** FemConstraintTemperature
-*NSET,NSET=FemConstraintTemperature
-5,
-6,
-7,
-8,
-13,
-19,
-26,
-28,
-29,
-
-***********************************************************
-** Materials
-** see information about units at file end
-** FreeCAD material name: Steel-Generic
-** MechanicalMaterial
-*MATERIAL, NAME=MechanicalMaterial
-*ELASTIC
-200000,0.3
-*CONDUCTIVITY
-43.27
-*EXPANSION
-1.2E-05
-*SPECIFIC HEAT
-500000000
-
-***********************************************************
-** Initial temperature constraint
-*INITIAL CONDITIONS,TYPE=TEMPERATURE
-** FemConstraintInitialTemperature
-Nall,300.0
-
-***********************************************************
-** Sections
-*SOLID SECTION, ELSET=MechanicalMaterialSolid, MATERIAL=MechanicalMaterial
-
-***********************************************************
-** At least one step is needed to run an CalculiX analysis of FreeCAD
-*STEP, INC=2000
-*CONTROLS, PARAMETERS=TIME INCREMENTATION
-4,8,9,200,10,400,,200,,
-0.25,0.5,0.75,0.85,,,1.5,
-*COUPLED TEMPERATURE-DISPLACEMENT, STEADY STATE
-1.0,1.0
-
-***********************************************************
-** Fixed Constraints
-** FemConstraintFixed
-*BOUNDARY
-FemConstraintFixed,1
-FemConstraintFixed,2
-FemConstraintFixed,3
-
-
-***********************************************************
-** Fixed temperature constraint applied
-** FemConstraintTemperature
-*BOUNDARY
-FemConstraintTemperature,11,11,310.93
-
-
-***********************************************************
-** constraints heatflux element face heatflux
-** FemConstraintHeatflux
-*FILM
-** Heat flux on face Box:Face3
-3,F2,255.3722,0.005678
-7,F3,255.3722,0.005678
-11,F2,255.3722,0.005678
-12,F2,255.3722,0.005678
-** Heat flux on face Box:Face4
-1,F2,255.3722,0.005678
-2,F4,255.3722,0.005678
-4,F4,255.3722,0.005678
-9,F4,255.3722,0.005678
-** Heat flux on face Box:Face5
-1,F4,255.3722,0.005678
-3,F4,255.3722,0.005678
-4,F3,255.3722,0.005678
-10,F3,255.3722,0.005678
-** Heat flux on face Box:Face6
-6,F4,255.3722,0.005678
-7,F4,255.3722,0.005678
-8,F4,255.3722,0.005678
-12,F3,255.3722,0.005678
-
-***********************************************************
-** Outputs --> frd file
-*NODE FILE
-U, NT
-*EL FILE
-S, E
-** outputs --> dat file
-** reaction forces for Constraint fixed
-*NODE PRINT, NSET=FemConstraintFixed, TOTALS=ONLY
-RF
-
-
-***********************************************************
-*END STEP 
-
-***********************************************************
-** CalculiX Input file
-**   written by    --> FreeCAD 0.17.9749 (Git)
-**   written on    --> Sun Jan 22 14:33:57 2017
-**   file name     --> 
-**   analysis name --> Analysis
-**
-**
-***********************************************************
-**  About units:
-**  See ccx manual, ccx does not know about any unit.
-**  Golden rule: The user must make sure that the numbers they provide have consistent units.
-**  The user is the FreeCAD calculix writer module ;-)
-**
-**  The unit system which is used at Guido Dhondt's company: mm, N, s, K
-**  Since Length and Mass are connected by Force, if Length is mm the Mass is in t to get N
-**  The following units are used to write to inp file:
-**
-**  Length: mm (this includes the mesh geometry)
-**  Mass: t
-**  TimeSpan: s
-**  Temperature: K
-**
-**  This leads to:
-**  Force: N
-**  Pressure: N/mm^2 == MPa (Young's Modulus has unit Pressure)
-**  Density: t/mm^3
-**  Gravity: mm/s^2
-**  Thermal conductivity: t*mm/K/s^3 == as W/m/K == kW/mm/K
-**  Specific Heat: mm^2/s^2/K = J/kg/K == kJ/t/K
-**
diff --git a/src/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values b/src/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values
deleted file mode 100644
index aa8fb536a6..0000000000
--- a/src/Mod/Fem/femtest/data/calculix/thermomech_spine_expected_values
+++ /dev/null
@@ -1,13 +0,0 @@
-U1: (-0.0009424550, 0.0072981800)
-U2: (-0.0016338200, 0.0022231800)
-U3: (-0.0018532900, 0.0022067500)
-Uabs: (0.0000000000, 0.0073257122)
-Sabs: (0.3071229725, 35.8618037277)
-MaxPrin: (-5.8043388849, 11.1175902063)
-MidPrin: (-38.5576970149, 10.7086318773)
-MinPrin: (-38.5960841002, 6.3205092526)
-MaxShear: (0.1766446029, 17.9323020685)
-Peeq: (0.0000000000, 0.0000000000)
-Temp: (293.4470000000, 310.9300000000)
-MFlow: (0.0000000000, 0.0000000000)
-NPress: (0.0000000000, 0.0000000000)
diff --git a/src/Mod/Fem/femtest/test_commands.sh b/src/Mod/Fem/femtest/test_commands.sh
index 6454019ba8..8e877a5b1e 100644
--- a/src/Mod/Fem/femtest/test_commands.sh
+++ b/src/Mod/Fem/femtest/test_commands.sh
@@ -49,8 +49,6 @@ make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_z88.TestSolverZ88
 # methods
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_ccxtools.TestCcxTools.test_box_frequency
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_ccxtools.TestCcxTools.test_box_static
-make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_ccxtools.TestCcxTools.test_thermomech_flow1D
-make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_ccxtools.TestCcxTools.test_thermomech_spine
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_common.TestFemCommon.test_adding_refshaps
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_common.TestFemCommon.test_pyimport_all_FEM_modules
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_femimport.TestFemImport.test_import_fem
@@ -112,8 +110,6 @@ make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalc
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_square_pipe_end_twisted_edgeforces
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_square_pipe_end_twisted_nodeforces
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_bimetall
-make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_flow1D
-make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_spine
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_box_static_0_mm
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_ccxcantilever_faceload_0_mm
 make -j 4 && ./bin/FreeCADCmd -t femtest.app.test_solver_elmer.TestSolverElmer.test_ccxcantilever_faceload_1_si
@@ -143,16 +139,6 @@ unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_ccxtools.TestCcxTools.test_box_static'
 ))
 
-import unittest
-unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-    'femtest.app.test_ccxtools.TestCcxTools.test_thermomech_flow1D'
-))
-
-import unittest
-unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-    'femtest.app.test_ccxtools.TestCcxTools.test_thermomech_spine'
-))
-
 import unittest
 unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_common.TestFemCommon.test_adding_refshaps'
@@ -458,16 +444,6 @@ unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_bimetall'
 ))
 
-import unittest
-unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-    'femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_flow1D'
-))
-
-import unittest
-unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
-    'femtest.app.test_solver_calculix.TestSolverCalculix.test_thermomech_spine'
-))
-
 import unittest
 unittest.TextTestRunner().run(unittest.TestLoader().loadTestsFromName(
     'femtest.app.test_solver_elmer.TestSolverElmer.test_box_static_0_mm'